VE Config changes not reflected in the integration

[dougle03]

Hi all,
I installed the integration whilst I was testing my Inverter on a limited 13amp supply, thus the settings in VEConfig were limited to 13amps to ensure the cable would not be overloaded.
The inverter is now installed on a 32amp feed. I've changed the settings in VEConfig for max current, charge and discharge rates within VEConfig, but these are not being reflected in the integration. For example, the max amps in VEBus is still limited to 13amps on the slider, and the slider won't go any higher... If I manually set the amps to 32 in the portal, then it shows 32 in the integration, but as soon as I try and change the amps using the slider it jumps back to max 13. I assume these are limits imposed during the integrations initial setup. Is there any other way to change these limits within HA. I don't mind digging into xml/yaml etc to do this?

I don't want to uninstall and reinstall as I've a fair few automations ect that would not like the renaming of the entities, plus dashboards make use of the same entities...
I've tried the reload option, that didn't change the slider limits. Any other way to do this?
Thanks

[dougle03]

Anyone! Am I the only one with this problem...?
Any help greatly appreciated. Thanks.