Can bambulab be used Flow-Temperature

[yinbaozong]

No description provided.

[sb53systems]

I didn't understand the question!
the current version of the script is only compatible with Klipper printers and Slic3r based Slicers, like : OrcaSlicer, PrusaSlicer, SuperSlicer,,...

Tell me if you want more informations.

Salim.

[yinbaozong]

Thank you very much for your reply. I am using the bambulab A1 printer, and I would like to use the plugin you developed. However, based on your mention that it only supports klipper firmware, I don't think I can use it. Will you be adding support for bambulab printers in the future?

[yinbaozong]

Hello, I would like to ask how to solve this “error Erreur E/S 32.”

[sb53systems]

Hello, I would like to ask how to solve this “error Erreur E/S 32.

This problem is solved : #7

Will you be adding support for bambulab printers in the future?

Maybe yes.

Best reguards.
Salim

[sb53systems]

@yinbaozong the current version of the script is supposed to be usable for all firmwares, could you confirm that it is functional with your printer?
Let me know if you need more information

[keithwkx]

Hi @sb53systems i tried using it on my bambu printer, and it seams its persistently asking for a printer config file. May i ask if there is a way for me to obtain this or an idea of what am i looking for?

[keithwkx]

can the export preset settings in orcaslicer be utilized here?

[sb53systems]

Hey @keithwkx the config.json file can be obtained automaticaly only with Klipper Firmware. For Bambu 3D printers, you need to make this file manualy.
I can help you with that, just send me any .3mf file then i'll extract thous values from your OrcaSlicer Printer Config. example bellow:

[keithwkx]

I see, here is a .3mf file i exported.
Does this file differ for the different printer profiles i use &
Is there a guide on how do i make it manually?
Much appreciated
bambutest.zip

[sb53systems]

Here is a config.json file for your P1S
config.json
You have to use this button to add it

Just follow this guide to make the config.json file :

Do not hesitate if you need further.
Have a good time.

[keithwkx]

TQVM, i shall try it after

[keithwkx]

@sb53systems Another minor question,

the only settings i need to modify here are the filament settings right?

So for example these are my filament settings

The input should be as follows?

[sb53systems]

@keithwkx You have to make a new orca profil that includes all my recommendations (Max Speed, temp-to-edit and print-end comments in the Machine G-Code).
For the script you have to follow this guide:

I think you have to use a more gradual temp change in the script (example bellow), or make the visual calibration for your filament!

You can reach me via discord if you need more help and instructions.