Skip to content

Commit

Permalink
Update readme documentation
Browse files Browse the repository at this point in the history 
Signed-off-by: falkTX <[email protected]>
  • Loading branch information
@falkTX
falkTX committed Apr 9, 2024
1 parent 6f3ff37 commit 4fb86ce
Showing 1 changed file with 68 additions and 39 deletions.
107 changes: 68 additions & 39 deletions README.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -108,32 +108,32 @@ The commands supported by mod-host are:

add <lv2_uri> <instance_number>
* add an LV2 plugin encapsulated as a jack client
e.g.: add http://lv2plug.in/plugins/eg-amp 0
instance_number must be any value between 0 ~ 9999, inclusively
e.g.: add "http://lv2plug.in/plugins/eg-amp" 0
instance_number must be any value between 0 ~ 9990, inclusively

remove <instance_number>
* remove an LV2 plugin instance (and also the jack client)
e.g.: remove 0

preset_load <instance_number> <preset_uri>
* load a preset state to given effect instance
* load a preset state of an effect instance
e.g.: preset_load 0 "http://drobilla.net/plugins/mda/presets#JX10-moogcury-lite"

preset_save <instance_number> <preset_name> <dir> <file_name>
* save a preset state from given effect instance
e.g.: preset_save 0 "My Preset" /home/user/.lv2/my-presets.lv2 mypreset.ttl
* save a preset state of an effect instance
e.g.: preset_save 0 "My Preset" "/home/user/.lv2/my-presets.lv2" "mypreset.ttl"

preset_show <instance_number> <preset_uri>
* show the preset information of requested instance / URI
e.g.: preset_show 0 http://drobilla.net/plugins/mda/presets#EPiano-bright
preset_show <preset_uri>
* show the preset information of requested URI
e.g.: preset_show "http://drobilla.net/plugins/mda/presets#EPiano-bright"

connect <origin_port> <destination_port>
* connect two effect audio ports
e.g.: connect system:capture_1 effect_0:in
* connect two jack ports
e.g.: connect "system:capture_1" "effect_0:in"

disconnect <origin_port> <destination_port>
* disconnect two effect audio ports
e.g.: disconnect system:capture_1 effect_0:in
* disconnect two jack ports
e.g.: disconnect "system:capture_1" "effect_0:in"

bypass <instance_number> <bypass_value>
* toggle effect processing
Expand All @@ -142,42 +142,54 @@ The commands supported by mod-host are:
if bypass_value = 0 process effect

param_set <instance_number> <param_symbol> <param_value>
* set a value to given control
e.g.: param_set 0 gain 2.50
* set the value of a control port
e.g.: param_set 0 "gain" 2.5

param_get <instance_number> <param_symbol>
* get the value of the request control
e.g.: param_get 0 gain
* get the value of a control port
e.g.: param_get 0 "gain"

param_monitor <instance_number> <param_symbol> <cond_op> <value>
* do monitoring a effect instance control port according given condition
e.g: param_monitor 0 gain > 2.50
* monitor a control port according to a condition
e.g: param_monitor 0 "gain" ">" 2.5

patch_set <instance_number> <property_uri> <value>
* set the value of a control port
e.g.: patch_set 0 "gain" 2.5

patch_get <instance_number> <property_uri>
* get the value of a control port
e.g.: patch_get 0 "gain"

licensee <instance_number>
* get the licensee name for a commercial plugin
e.g.: licensee 0

monitor <addr> <port> <status>
* open a socket port to monitoring parameters
* open a socket port for monitoring parameter changes
e.g: monitor localhost 12345 1
if status = 1 start monitoring
if status = 0 stop monitoring

monitor_output <instance_number> <param_symbol>
* request monitoring of an output control port in the feedback port
e.g.: monitor_output 0 meter
* request monitoring of an output control port (on the feedback port)
e.g.: monitor_output 0 "meter"

midi_learn <instance_number> <param_symbol> <minimum> <maximum>
* start MIDI learn for a parameter
e.g.: midi_learn 0 gain 0.0 1.0
* start MIDI learn for a control port
e.g.: midi_learn 0 "gain" 0.0 1.0

midi_map <instance_number> <param_symbol> <midi_channel> <midi_cc> <minimum> <maximum>
* map a MIDI controller to a parameter
e.g.: midi_map 0 gain 0 7 0.0 1.0
* map a MIDI controller to a control port
e.g.: midi_map 0 "gain" 0 7 0.0 1.0

midi_unmap <instance_number> <param_symbol>
* unmap the MIDI controller from a parameter
e.g.: unmap 0 gain
* unmap the MIDI controller from a control port
e.g.: midi_unmap 0 "gain"

monitor_midi_program <midi_channel> <enable>
* listen to MIDI program change messages (on the feedback port)
e.g.: monitor_midi_program 0 1

set_midi_program_change_pedalboard_bank_channel <enable> <midi_channel>
* set the MIDI channel which changes pedalboard banks on MIDI program change. <midi_channel> is in the range of [0,15].
Expand All @@ -188,20 +200,24 @@ The commands supported by mod-host are:
e.g.: set_midi_program_change_pedalboard_snapshot_channel 1 4 to enable listening for preset changes on channel 5

cc_map <instance_number> <param_symbol> <device_id> <actuator_id> <label> <value> <minimum> <maximum> <steps> <unit> <scalepoints_count> <scalepoints...>
* map a Control Chain actuator to a parameter
e.g.: cc_map 0 gain 0 1 "Gain" 0.0 -24.0 3.0 33 "dB" 0
* map a Control Chain actuator to a control port
e.g.: cc_map 0 "gain" 0 1 "Gain" 0.0 -24.0 3.0 33 "dB" 0

cc_unmap <instance_number> <param_symbol>
* unmap the Control Chain actuator from a parameter
e.g.: unmap 0 gain
* unmap the Control Chain actuator from a control port
e.g.: cc_unmap 0 "gain"

cc_value_set <instance_number> <param_symbol> <value>
* set the value of a mapped Control Chain actuator
e.g.: cc_value_set 0 "gain" 2.5

cv_map <instance_number> <param_symbol> <source_port_name> <minimum> <maximum> <operational-mode>
* map a CV source port to a parameter, operational-mode being one of '-', '+', 'b' or '='
e.g.: cv_map 0 gain "AMS CV Source:CV Out 1" -24.0 3.0 =
* map a CV source port to a control port, operational-mode being one of '-', '+', 'b' or '='
e.g.: cv_map 0 "gain" "AMS CV Source:CV Out 1" -24.0 3.0 =

cv_unmap <instance_number> <param_symbol>
* unmap the CV source port actuator from a parameter
e.g.: cv_unmap 0 gain
* unmap the CV source port actuator from a control port
e.g.: cv_unmap 0 "gain"

cpu_load
* return current jack cpu load
Expand All @@ -218,21 +234,34 @@ The commands supported by mod-host are:

bundle_add <bundle_path>
* add a bundle to the running lv2 world
e.g.: bundle_add /path/to/bundle.lv2
e.g.: bundle_add "/path/to/bundle.lv2"

bundle_remove <bundle_path>
bundle_remove <bundle_path> <resource>
* remove a bundle from the running lv2 world
e.g.: bundle_remove /path/to/bundle.lv2
e.g.: bundle_remove "/path/to/bundle.lv2" ""

feature_enable <feature> <enable>
* enable or disable a feature
e.g.: feature_enable link 1
current features are "link", "processing" and "midi_clock_slave"

set_bpm <beats_per_minute>
* set the global beats per minute transport value
e.g.: set_bpm 120

set_bpb <beats_per_bar>
* set the global beats per bar transport value
e.g.: set_bpb 4

transport <rolling> <beats_per_bar> <beats_per_minute>
* change the current transport state
* change the global transport state
e.g.: transport 1 4 120

transport_sync <mode>
* change the transport sync mode
* mode can be one of "none", "link" or "midi"
e.g.: transport_sync "midi"

output_data_ready
* report feedback port ready for more messages

Expand Down

0 comments on commit 4fb86ce

Please sign in to comment.