Spring WebFlux

The original web framework included in the Spring Framework, Spring Web MVC, was purpose-built for the Servlet API and Servlet containers. The reactive-stack web framework, Spring WebFlux, was added later in version 5.0. It is fully non-blocking, supports Reactive Streams back pressure, and runs on such servers as Netty, Undertow, and Servlet 3.1+ containers.

Both web frameworks mirror the names of their source modules (spring-webmvc and spring-webflux) and co-exist side by side in the Spring Framework. Each module is optional. Applications can use one or the other module or, in some cases, both — for example, Spring MVC controllers with the reactive WebClient.

Overview

Why was Spring WebFlux created?

Part of the answer is the need for a non-blocking web stack to handle concurrency with a small number of threads and scale with fewer hardware resources. Servlet 3.1 did provide an API for non-blocking I/O. However, using it leads away from the rest of the Servlet API, where contracts are synchronous (Filter, Servlet) or blocking (getParameter, getPart). This was the motivation for a new common API to serve as a foundation across any non-blocking runtime. That is important because of servers (such as Netty) that are well-established in the async, non-blocking space.

The other part of the answer is functional programming. Much as the addition of annotations in Java 5 created opportunities (such as annotated REST controllers or unit tests), the addition of lambda expressions in Java 8 created opportunities for functional APIs in Java. This is a boon for non-blocking applications and continuation-style APIs (as popularized by CompletableFuture and ReactiveX) that allow declarative composition of asynchronous logic. At the programming-model level, Java 8 enabled Spring WebFlux to offer functional web endpoints alongside annotated controllers.

Define “Reactive”

We touched on “non-blocking” and “functional” but what does reactive mean?

The term, “reactive,” refers to programming models that are built around reacting to change — network components reacting to I/O events, UI controllers reacting to mouse events, and others. In that sense, non-blocking is reactive, because, instead of being blocked, we are now in the mode of reacting to notifications as operations complete or data becomes available.

There is also another important mechanism that we on the Spring team associate with “reactive” and that is non-blocking back pressure. In synchronous, imperative code, blocking calls serve as a natural form of back pressure that forces the caller to wait. In non-blocking code, it becomes important to control the rate of events so that a fast producer does not overwhelm its destination.

Reactive Streams is a small spec (also adopted in Java 9) that defines the interaction between asynchronous components with back pressure. For example a data repository (acting as Publisher) can produce data that an HTTP server (acting as Subscriber) can then write to the response. The main purpose of Reactive Streams is to let the subscriber control how quickly or how slowly the publisher produces data.

Note	Common question: what if a publisher cannot slow down? The purpose of Reactive Streams is only to establish the mechanism and a boundary. If a publisher cannot slow down, it has to decide whether to buffer, drop, or fail.

Reactive API

Reactive Streams plays an important role for interoperability. It is of interest to libraries and infrastructure components but less useful as an application API, because it is too low-level. Applications need a higher-level and richer, functional API to compose async logic — similar to the Java 8 Stream API but not only for collections. This is the role that reactive libraries play.

Reactor is the reactive library of choice for Spring WebFlux. It provides the Mono and Flux API types to work on data sequences of 0..1 (Mono) and 0..N (Flux) through a rich set of operators aligned with the ReactiveX vocabulary of operators. Reactor is a Reactive Streams library and, therefore, all of its operators support non-blocking back pressure. Reactor has a strong focus on server-side Java. It is developed in close collaboration with Spring.

WebFlux requires Reactor as a core dependency but it is interoperable with other reactive libraries via Reactive Streams. As a general rule, a WebFlux API accepts a plain Publisher as input, adapts it to a Reactor type internally, uses that, and returns either a Flux or a Mono as output. So, you can pass any Publisher as input and you can apply operations on the output, but you need to adapt the output for use with another reactive library. Whenever feasible (for example, annotated controllers), WebFlux adapts transparently to the use of RxJava or another reactive library. See [webflux-reactive-libraries] for more details.

Note	In addition to Reactive APIs, WebFlux can also be used with Coroutines APIs in Kotlin which provides a more imperative style of programming. The following Kotlin code samples will be provided with Coroutines APIs.

Programming Models

The spring-web module contains the reactive foundation that underlies Spring WebFlux, including HTTP abstractions, Reactive Streams adapters for supported servers, codecs, and a core WebHandler API comparable to the Servlet API but with non-blocking contracts.

On that foundation, Spring WebFlux provides a choice of two programming models:

Annotated Controllers: Consistent with Spring MVC and based on the same annotations from the spring-web module. Both Spring MVC and WebFlux controllers support reactive (Reactor and RxJava) return types, and, as a result, it is not easy to tell them apart. One notable difference is that WebFlux also supports reactive @RequestBody arguments.
[webflux-fn]: Lambda-based, lightweight, and functional programming model. You can think of this as a small library or a set of utilities that an application can use to route and handle requests. The big difference with annotated controllers is that the application is in charge of request handling from start to finish versus declaring intent through annotations and being called back.

Applicability

Spring MVC or WebFlux?

A natural question to ask but one that sets up an unsound dichotomy. Actually, both work together to expand the range of available options. The two are designed for continuity and consistency with each other, they are available side by side, and feedback from each side benefits both sides. The following diagram shows how the two relate, what they have in common, and what each supports uniquely:

We suggest that you consider the following specific points:

If you have a Spring MVC application that works fine, there is no need to change. Imperative programming is the easiest way to write, understand, and debug code. You have maximum choice of libraries, since, historically, most are blocking.
If you are already shopping for a non-blocking web stack, Spring WebFlux offers the same execution model benefits as others in this space and also provides a choice of servers (Netty, Tomcat, Jetty, Undertow, and Servlet 3.1+ containers), a choice of programming models (annotated controllers and functional web endpoints), and a choice of reactive libraries (Reactor, RxJava, or other).
If you are interested in a lightweight, functional web framework for use with Java 8 lambdas or Kotlin, you can use the Spring WebFlux functional web endpoints. That can also be a good choice for smaller applications or microservices with less complex requirements that can benefit from greater transparency and control.
In a microservice architecture, you can have a mix of applications with either Spring MVC or Spring WebFlux controllers or with Spring WebFlux functional endpoints. Having support for the same annotation-based programming model in both frameworks makes it easier to re-use knowledge while also selecting the right tool for the right job.
A simple way to evaluate an application is to check its dependencies. If you have blocking persistence APIs (JPA, JDBC) or networking APIs to use, Spring MVC is the best choice for common architectures at least. It is technically feasible with both Reactor and RxJava to perform blocking calls on a separate thread but you would not be making the most of a non-blocking web stack.
If you have a Spring MVC application with calls to remote services, try the reactive WebClient. You can return reactive types (Reactor, RxJava, or other) directly from Spring MVC controller methods. The greater the latency per call or the interdependency among calls, the more dramatic the benefits. Spring MVC controllers can call other reactive components too.
If you have a large team, keep in mind the steep learning curve in the shift to non-blocking, functional, and declarative programming. A practical way to start without a full switch is to use the reactive WebClient. Beyond that, start small and measure the benefits. We expect that, for a wide range of applications, the shift is unnecessary. If you are unsure what benefits to look for, start by learning about how non-blocking I/O works (for example, concurrency on single-threaded Node.js) and its effects.

Servers

Spring WebFlux is supported on Tomcat, Jetty, Servlet 3.1+ containers, as well as on non-Servlet runtimes such as Netty and Undertow. All servers are adapted to a low-level, common API so that higher-level programming models can be supported across servers.

Spring WebFlux does not have built-in support to start or stop a server. However, it is easy to assemble an application from Spring configuration and WebFlux infrastructure and run it with a few lines of code.

Spring Boot has a WebFlux starter that automates these steps. By default, the starter uses Netty, but it is easy to switch to Tomcat, Jetty, or Undertow by changing your Maven or Gradle dependencies. Spring Boot defaults to Netty, because it is more widely used in the asynchronous, non-blocking space and lets a client and a server share resources.

Tomcat and Jetty can be used with both Spring MVC and WebFlux. Keep in mind, however, that the way they are used is very different. Spring MVC relies on Servlet blocking I/O and lets applications use the Servlet API directly if they need to. Spring WebFlux relies on Servlet 3.1 non-blocking I/O and uses the Servlet API behind a low-level adapter. It is not exposed for direct use.

For Undertow, Spring WebFlux uses Undertow APIs directly without the Servlet API.

Performance

Performance has many characteristics and meanings. Reactive and non-blocking generally do not make applications run faster. They can, in some cases, (for example, if using the WebClient to run remote calls in parallel). On the whole, it requires more work to do things the non-blocking way and that can slightly increase the required processing time.

The key expected benefit of reactive and non-blocking is the ability to scale with a small, fixed number of threads and less memory. That makes applications more resilient under load, because they scale in a more predictable way. In order to observe those benefits, however, you need to have some latency (including a mix of slow and unpredictable network I/O). That is where the reactive stack begins to show its strengths, and the differences can be dramatic.

Concurrency Model

Both Spring MVC and Spring WebFlux support annotated controllers, but there is a key difference in the concurrency model and the default assumptions for blocking and threads.

In Spring MVC (and servlet applications in general), it is assumed that applications can block the current thread, (for example, for remote calls). For this reason, servlet containers use a large thread pool to absorb potential blocking during request handling.

In Spring WebFlux (and non-blocking servers in general), it is assumed that applications do not block. Therefore, non-blocking servers use a small, fixed-size thread pool (event loop workers) to handle requests.

Tip	“To scale” and “small number of threads” may sound contradictory but to never block the current thread (and rely on callbacks instead) means that you do not need extra threads, as there are no blocking calls to absorb.

Invoking a Blocking API

What if you do need to use a blocking library? Both Reactor and RxJava provide the publishOn operator to continue processing on a different thread. That means there is an easy escape hatch. Keep in mind, however, that blocking APIs are not a good fit for this concurrency model.

Mutable State

In Reactor and RxJava, you declare logic through operators. At runtime, a reactive pipeline is formed where data is processed sequentially, in distinct stages. A key benefit of this is that it frees applications from having to protect mutable state because application code within that pipeline is never invoked concurrently.

Threading Model

What threads should you expect to see on a server running with Spring WebFlux?

On a “vanilla” Spring WebFlux server (for example, no data access nor other optional dependencies), you can expect one thread for the server and several others for request processing (typically as many as the number of CPU cores). Servlet containers, however, may start with more threads (for example, 10 on Tomcat), in support of both servlet (blocking) I/O and servlet 3.1 (non-blocking) I/O usage.
The reactive WebClient operates in event loop style. So you can see a small, fixed number of processing threads related to that (for example, reactor-http-nio- with the Reactor Netty connector). However, if Reactor Netty is used for both client and server, the two share event loop resources by default.
Reactor and RxJava provide thread pool abstractions, called schedulers, to use with the publishOn operator that is used to switch processing to a different thread pool. The schedulers have names that suggest a specific concurrency strategy — for example, “parallel” (for CPU-bound work with a limited number of threads) or “elastic” (for I/O-bound work with a large number of threads). If you see such threads, it means some code is using a specific thread pool Scheduler strategy.
Data access libraries and other third party dependencies can also create and use threads of their own.

Configuring

The Spring Framework does not provide support for starting and stopping servers. To configure the threading model for a server, you need to use server-specific configuration APIs, or, if you use Spring Boot, check the Spring Boot configuration options for each server. You can configure the WebClient directly. For all other libraries, see their respective documentation.

Reactive Core

The spring-web module contains the following foundational support for reactive web applications:

For server request processing there are two levels of support.
- HttpHandler: Basic contract for HTTP request handling with non-blocking I/O and Reactive Streams back pressure, along with adapters for Reactor Netty, Undertow, Tomcat, Jetty, and any Servlet 3.1+ container.
- WebHandler API: Slightly higher level, general-purpose web API for request handling, on top of which concrete programming models such as annotated controllers and functional endpoints are built.
For the client side, there is a basic ClientHttpConnector contract to perform HTTP requests with non-blocking I/O and Reactive Streams back pressure, along with adapters for Reactor Netty, reactive Jetty HttpClient and Apache HttpComponents. The higher level WebClient used in applications builds on this basic contract.
For client and server, codecs for serialization and deserialization of HTTP request and response content.

`HttpHandler`

{api-spring-framework}/http/server/reactive/HttpHandler.html[HttpHandler] is a simple contract with a single method to handle a request and a response. It is intentionally minimal, and its main and only purpose is to be a minimal abstraction over different HTTP server APIs.

The following table describes the supported server APIs:

Server name	Server API used	Reactive Streams support
Netty	Netty API	Reactor Netty
Undertow	Undertow API	spring-web: Undertow to Reactive Streams bridge
Tomcat	Servlet 3.1 non-blocking I/O; Tomcat API to read and write ByteBuffers vs byte[]	spring-web: Servlet 3.1 non-blocking I/O to Reactive Streams bridge
Jetty	Servlet 3.1 non-blocking I/O; Jetty API to write ByteBuffers vs byte[]	spring-web: Servlet 3.1 non-blocking I/O to Reactive Streams bridge
Servlet 3.1 container	Servlet 3.1 non-blocking I/O	spring-web: Servlet 3.1 non-blocking I/O to Reactive Streams bridge

The following table describes server dependencies (also see supported versions):

Server name	Group id	Artifact name
Reactor Netty	io.projectreactor.netty	reactor-netty
Undertow	io.undertow	undertow-core
Tomcat	org.apache.tomcat.embed	tomcat-embed-core
Jetty	org.eclipse.jetty	jetty-server, jetty-servlet

The code snippets below show using the HttpHandler adapters with each server API:

Reactor Netty

Java

HttpHandler handler = ...
ReactorHttpHandlerAdapter adapter = new ReactorHttpHandlerAdapter(handler);
HttpServer.create().host(host).port(port).handle(adapter).bind().block();

Kotlin

val handler: HttpHandler = ...
val adapter = ReactorHttpHandlerAdapter(handler)
HttpServer.create().host(host).port(port).handle(adapter).bind().block()

Undertow

Java

HttpHandler handler = ...
UndertowHttpHandlerAdapter adapter = new UndertowHttpHandlerAdapter(handler);
Undertow server = Undertow.builder().addHttpListener(port, host).setHandler(adapter).build();
server.start();

Kotlin

val handler: HttpHandler = ...
val adapter = UndertowHttpHandlerAdapter(handler)
val server = Undertow.builder().addHttpListener(port, host).setHandler(adapter).build()
server.start()

Tomcat

Java

HttpHandler handler = ...
Servlet servlet = new TomcatHttpHandlerAdapter(handler);

Tomcat server = new Tomcat();
File base = new File(System.getProperty("java.io.tmpdir"));
Context rootContext = server.addContext("", base.getAbsolutePath());
Tomcat.addServlet(rootContext, "main", servlet);
rootContext.addServletMappingDecoded("/", "main");
server.setHost(host);
server.setPort(port);
server.start();

Kotlin

val handler: HttpHandler = ...
val servlet = TomcatHttpHandlerAdapter(handler)

val server = Tomcat()
val base = File(System.getProperty("java.io.tmpdir"))
val rootContext = server.addContext("", base.absolutePath)
Tomcat.addServlet(rootContext, "main", servlet)
rootContext.addServletMappingDecoded("/", "main")
server.host = host
server.setPort(port)
server.start()

Jetty

Java

HttpHandler handler = ...
Servlet servlet = new JettyHttpHandlerAdapter(handler);

Server server = new Server();
ServletContextHandler contextHandler = new ServletContextHandler(server, "");
contextHandler.addServlet(new ServletHolder(servlet), "/");
contextHandler.start();

ServerConnector connector = new ServerConnector(server);
connector.setHost(host);
connector.setPort(port);
server.addConnector(connector);
server.start();

Kotlin

val handler: HttpHandler = ...
val servlet = JettyHttpHandlerAdapter(handler)

val server = Server()
val contextHandler = ServletContextHandler(server, "")
contextHandler.addServlet(ServletHolder(servlet), "/")
contextHandler.start();

val connector = ServerConnector(server)
connector.host = host
connector.port = port
server.addConnector(connector)
server.start()

Servlet 3.1+ Container

To deploy as a WAR to any Servlet 3.1+ container, you can extend and include {api-spring-framework}/web/server/adapter/AbstractReactiveWebInitializer.html[AbstractReactiveWebInitializer] in the WAR. That class wraps an HttpHandler with ServletHttpHandlerAdapter and registers that as a Servlet.

`WebHandler` API

The org.springframework.web.server package builds on the HttpHandler contract to provide a general-purpose web API for processing requests through a chain of multiple {api-spring-framework}/web/server/WebExceptionHandler.html[WebExceptionHandler], multiple {api-spring-framework}/web/server/WebFilter.html[WebFilter], and a single {api-spring-framework}/web/server/WebHandler.html[WebHandler] component. The chain can be put together with WebHttpHandlerBuilder by simply pointing to a Spring ApplicationContext where components are auto-detected, and/or by registering components with the builder.

While HttpHandler has a simple goal to abstract the use of different HTTP servers, the WebHandler API aims to provide a broader set of features commonly used in web applications such as:

User session with attributes.
Request attributes.
Resolved Locale or Principal for the request.
Access to parsed and cached form data.
Abstractions for multipart data.
and more..

Special bean types

The table below lists the components that WebHttpHandlerBuilder can auto-detect in a Spring ApplicationContext, or that can be registered directly with it:

Bean name	Bean type	Count	Description
<any>	`WebExceptionHandler`	0..N	Provide handling for exceptions from the chain of `WebFilter` instances and the target `WebHandler`. For more details, see Exceptions.
<any>	`WebFilter`	0..N	Apply interception style logic to before and after the rest of the filter chain and the target `WebHandler`. For more details, see Filters.
`webHandler`	`WebHandler`	1	The handler for the request.
`webSessionManager`	`WebSessionManager`	0..1	The manager for `WebSession` instances exposed through a method on `ServerWebExchange`. `DefaultWebSessionManager` by default.
`serverCodecConfigurer`	`ServerCodecConfigurer`	0..1	For access to `HttpMessageReader` instances for parsing form data and multipart data that is then exposed through methods on `ServerWebExchange`. `ServerCodecConfigurer.create()` by default.
`localeContextResolver`	`LocaleContextResolver`	0..1	The resolver for `LocaleContext` exposed through a method on `ServerWebExchange`. `AcceptHeaderLocaleContextResolver` by default.
`forwardedHeaderTransformer`	`ForwardedHeaderTransformer`	0..1	For processing forwarded type headers, either by extracting and removing them or by removing them only. Not used by default.

Form Data

ServerWebExchange exposes the following method for accessing form data:

Java

Mono<MultiValueMap<String, String>> getFormData();

Kotlin

suspend fun getFormData(): MultiValueMap<String, String>

The DefaultServerWebExchange uses the configured HttpMessageReader to parse form data (application/x-www-form-urlencoded) into a MultiValueMap. By default, FormHttpMessageReader is configured for use by the ServerCodecConfigurer bean (see the Web Handler API).

Result Handler Type	Return Values	Default Order
`ResponseEntityResultHandler`	`ResponseEntity`, typically from `@Controller` instances.	0
`ServerResponseResultHandler`	`ServerResponse`, typically from functional endpoints.	0
`ResponseBodyResultHandler`	Handle return values from `@ResponseBody` methods or `@RestController` classes.	100
`ViewResolutionResultHandler`	`CharSequence`, {api-spring-framework}/web/reactive/result/view/View.html[`View`], {api-spring-framework}/ui/Model.html[Model], `Map`, {api-spring-framework}/web/reactive/result/view/Rendering.html[Rendering], or any other `Object` is treated as a model attribute. See also View Resolution.	`Integer.MAX_VALUE`

Pattern	Description	Example
`?`	Matches one character	`"/pages/t?st.html"` matches `"/pages/test.html"` and `"/pages/t3st.html"`
`*`	Matches zero or more characters within a path segment	`"/resources/.png"` matches `"/resources/file.png"` `"/projects//versions"` matches `"/projects/spring/versions"` but does not match `"/projects/spring/boot/versions"`
`**`	Matches zero or more path segments until the end of the path	`"/resources/"` matches `"/resources/file.png"` and `"/resources/images/file.png"` `"/resources//file.png"` is invalid as `**` is only allowed at the end of the path.
`{name}`	Matches a path segment and captures it as a variable named "name"	`"/projects/{project}/versions"` matches `"/projects/spring/versions"` and captures `project=spring`
`{name:[a-z]}+`	Matches the regexp `"[a-z]"+` as a path variable named "name"	"/projects/{project:[a-z]}/versions"` matches `"/projects/spring/versions"` but not `"/projects/spring1/versions"+
`{*path}`	Matches zero or more path segments until the end of the path and captures it as a variable named "path"	`"/resources/{*file}"` matches `"/resources/images/file.png"` and captures `file=images/file.png`

Controller method argument	Description
`ServerWebExchange`	Access to the full `ServerWebExchange` — container for the HTTP request and response, request and session attributes, `checkNotModified` methods, and others.
`ServerHttpRequest`, `ServerHttpResponse`	Access to the HTTP request or response.
`WebSession`	Access to the session. This does not force the start of a new session unless attributes are added. Supports reactive types.
`java.security.Principal`	The currently authenticated user — possibly a specific `Principal` implementation class if known. Supports reactive types.
`org.springframework.http.HttpMethod`	The HTTP method of the request.
`java.util.Locale`	The current request locale, determined by the most specific `LocaleResolver` available — in effect, the configured `LocaleResolver`/`LocaleContextResolver`.
`java.util.TimeZone` + `java.time.ZoneId`	The time zone associated with the current request, as determined by a `LocaleContextResolver`.
`@PathVariable`	For access to URI template variables. See URI Patterns.
`@MatrixVariable`	For access to name-value pairs in URI path segments. See Matrix Variables.
`@RequestParam`	For access to Servlet request parameters. Parameter values are converted to the declared method argument type. See `@RequestParam`. Note that use of `@RequestParam` is optional — for example, to set its attributes. See “Any other argument” later in this table.
`@RequestHeader`	For access to request headers. Header values are converted to the declared method argument type. See `@RequestHeader`.
`@CookieValue`	For access to cookies. Cookie values are converted to the declared method argument type. See `@CookieValue`.
`@RequestBody`	For access to the HTTP request body. Body content is converted to the declared method argument type by using `HttpMessageReader` instances. Supports reactive types. See `@RequestBody`.
`HttpEntity<B>`	For access to request headers and body. The body is converted with `HttpMessageReader` instances. Supports reactive types. See `HttpEntity`.
`@RequestPart`	For access to a part in a `multipart/form-data` request. Supports reactive types. See Multipart Content and Multipart Data.
`java.util.Map`, `org.springframework.ui.Model`, and `org.springframework.ui.ModelMap`.	For access to the model that is used in HTML controllers and is exposed to templates as part of view rendering.
`@ModelAttribute`	For access to an existing attribute in the model (instantiated if not present) with data binding and validation applied. See `@ModelAttribute` as well as `Model` and `DataBinder`. Note that use of `@ModelAttribute` is optional — for example, to set its attributes. See “Any other argument” later in this table.
`Errors`, `BindingResult`	For access to errors from validation and data binding for a command object, i.e. a `@ModelAttribute` argument. An `Errors`, or `BindingResult` argument must be declared immediately after the validated method argument.
`SessionStatus` + class-level `@SessionAttributes`	For marking form processing complete, which triggers cleanup of session attributes declared through a class-level `@SessionAttributes` annotation. See `@SessionAttributes` for more details.
`UriComponentsBuilder`	For preparing a URL relative to the current request’s host, port, scheme, and path. See URI Links.
`@SessionAttribute`	For access to any session attribute — in contrast to model attributes stored in the session as a result of a class-level `@SessionAttributes` declaration. See `@SessionAttribute` for more details.
`@RequestAttribute`	For access to request attributes. See `@RequestAttribute` for more details.
Any other argument	If a method argument is not matched to any of the above, it is, by default, resolved as a `@RequestParam` if it is a simple type, as determined by {api-spring-framework}/beans/BeanUtils.html#isSimpleProperty-java.lang.Class-[BeanUtils#isSimpleProperty], or as a `@ModelAttribute`, otherwise.

Controller method return value	Description
`@ResponseBody`	The return value is encoded through `HttpMessageWriter` instances and written to the response. See `@ResponseBody`.
`HttpEntity<B>`, `ResponseEntity<B>`	The return value specifies the full response, including HTTP headers, and the body is encoded through `HttpMessageWriter` instances and written to the response. See `ResponseEntity`.
`HttpHeaders`	For returning a response with headers and no body.
`String`	A view name to be resolved with `ViewResolver` instances and used together with the implicit model — determined through command objects and `@ModelAttribute` methods. The handler method can also programmatically enrich the model by declaring a `Model` argument (described earlier).
`View`	A `View` instance to use for rendering together with the implicit model — determined through command objects and `@ModelAttribute` methods. The handler method can also programmatically enrich the model by declaring a `Model` argument (described earlier).
`java.util.Map`, `org.springframework.ui.Model`	Attributes to be added to the implicit model, with the view name implicitly determined based on the request path.
`@ModelAttribute`	An attribute to be added to the model, with the view name implicitly determined based on the request path. Note that `@ModelAttribute` is optional. See “Any other return value” later in this table.
`Rendering`	An API for model and view rendering scenarios.
`void`	A method with a `void`, possibly asynchronous (for example, `Mono<Void>`), return type (or a `null` return value) is considered to have fully handled the response if it also has a `ServerHttpResponse`, a `ServerWebExchange` argument, or an `@ResponseStatus` annotation. The same is also true if the controller has made a positive ETag or `lastModified` timestamp check. // TODO: See Controllers for details. If none of the above is true, a `void` return type can also indicate “no response body” for REST controllers or default view name selection for HTML controllers.
`Flux<ServerSentEvent>`, `Observable<ServerSentEvent>`, or other reactive type	Emit server-sent events. The `ServerSentEvent` wrapper can be omitted when only data needs to be written (however, `text/event-stream` must be requested or declared in the mapping through the `produces` attribute).
Any other return value	If a return value is not matched to any of the above, it is, by default, treated as a view name, if it is `String` or `void` (default view name selection applies), or as a model attribute to be added to the model, unless it is a simple type, as determined by {api-spring-framework}/beans/BeanUtils.html#isSimpleProperty-java.lang.Class-[BeanUtils#isSimpleProperty], in which case it remains unresolved.

Files

webflux.adoc

Latest commit

History

webflux.adoc

File metadata and controls

Spring WebFlux

Overview

Define “Reactive”

Reactive API

Programming Models

Applicability

Servers

Performance

Concurrency Model

Reactive Core

HttpHandler

WebHandler API

Special bean types

Form Data

Multipart Data

Forwarded Headers

Filters

CORS

Exceptions

Codecs

Jackson JSON

Form Data

Multipart

Limits

Streaming

DataBuffer

Logging

Log Id

Sensitive Data

Custom codecs

DispatcherHandler

Special Bean Types

WebFlux Config

Processing

Result Handling

Exceptions

View Resolution

Handling

Redirecting

Content Negotiation

Annotated Controllers

@Controller

Request Mapping

URI Patterns

Pattern Comparison

Consumable Media Types

Producible Media Types

Parameters and Headers

HTTP HEAD, OPTIONS

Custom Annotations

Explicit Registrations

Handler Methods

Method Arguments

Return Values

Type Conversion

Matrix Variables

@RequestParam

@RequestHeader

@CookieValue

@ModelAttribute

@SessionAttributes

@SessionAttribute

@RequestAttribute

Multipart Content

@RequestBody

HttpEntity

@ResponseBody

ResponseEntity

Jackson JSON

JSON Views

Model

DataBinder

Managing Exceptions

REST API exceptions

`HttpHandler`

`WebHandler` API

`DataBuffer`

`DispatcherHandler`

`@Controller`

`@RequestParam`

`@RequestHeader`

`@CookieValue`

`@ModelAttribute`

`@SessionAttributes`

`@SessionAttribute`

`@RequestAttribute`

`@RequestBody`

`HttpEntity`

`@ResponseBody`

`ResponseEntity`

`Model`

`DataBinder`

`CacheControl`