Skip to content

Latest commit

 

History

History
78 lines (74 loc) · 3.07 KB

README.md

File metadata and controls

78 lines (74 loc) · 3.07 KB
Raw

Ultra96-NFS-Boot

This is an instruction to build the PYNQ v2.7 image for Ultra96-V2 board with root filesystem from NFS (Network File System).

Build Environment

  • Ubuntu 20.04
  • Vitis 2020.2
  • PetaLinux 2020.2

Steps

Prepare NFS folder on host

A NFS server should be setup on the host with some folders being shared

  1. Download the PYNQ v2.7 SD card image for Ultra96-V2 board from PYNQ official website

  2. We need files in the second partition of the image file. First check out the start offset of the second partition.

    fdisk <path_to_img>/Ultra96v2-2.7.0.img

    Then enter p from keyboard.

    Here the offset is 268288.

  3. Mount the second partition with offset = 268288*512 = 137363456

    mount -o loop,offset=137363456 <path_to_img>/Ultra96v2-2.7.0.img <mount_path>/

  4. Copy all the files to NFS shared folder

    cp <mount_path>/* <NFS_shared_folder>

Build the boot files

  1. Clone the PYNQ repository from github. 
    git clone https://github.com/Xilinx/PYNQ.git --branch image_v2.7
    cd PYNQ
  2. Copy the Ultra96v2 folder in this repository to boards folder.
  3. Edit the file sdbuild/boot/meta-pynq/recipes-kernel/linux/linux-xlnx/pynq.cfg, modify line 12 to mark the RTL8152 driver as built-in. 
    CONFIG_USB_RTL8152=y
  4. Open and edit the file sdbuild/Makefile.
    • Delete line 145 and 146
      • echo 'CONFIG_SUBSYSTEM_ROOTFS_EXT4=y' >> $$(PL_CONFIG_$1)
      • echo 'CONFIG_SUBSYSTEM_SDROOT_DEV="/dev/mmcblk0p2"' >> $$(PL_CONFIG_$1)
    • Incert below three lines around line 146, replace the field "/NFS/rootfs" and "192.168.1.x" with the NFS path and the IP address of NFS server 
      echo 'CONFIG_SUBSYSTEM_ROOTFS_NFS=y' >> $$(PL_CONFIG_$1)
echo 'CONFIG_SUBSYSTEM_NFSROOT_DIR="/NFS/rootfs"' >> $$(PL_CONFIG_$1)
echo 'CONFIG_SUBSYSTEM_NFSSERVER_IP="192.168.1.x"' >> $$(PL_CONFIG_$1)
  5. Edit the file sdbuild/boot/meta-pynq/recipes-bsp/device-tree/files/pynq_bootargs.dtsi, change the bootargs in line 3: 
    bootargs = "root=/dev/nfs nfsroot=192.168.1.x:/NFS/rootfs,nfsvers=3,tcp ip=dhcp rw rootwait earlyprintk devtmpfs.mount=1 uio_pdrv_genirq.of_id=\"generic-uio\" clk_ignore_unused";
    Replace the field "/NFS/rootfs" and "192.168.1.x" as above.
  6. Setup environment 
    source <Vitis_installation_path>/settings64.sh
source <PetaLinux_installation_path>/settings.sh
    sudo sdbuild/scripts/setup_host.sh
  7. Run make to start build 
    cd sdbuild
    make boot_files BOARDS=Ultra96v2
  8. When finished, the boot files (boot.scr, BOOT.BIN, image.ub) are saved in sdbuild/output/boot/Ultra96v2/
  9. Replace the files in the fist partition of SD card with the newly built files.