Below are the questions that workshop participants ask most often.
115,200 bps is one of the standard serial port bitrates. It's actually the bitrate that I've set up in the Arduino code. However, CPUs run on specific clocks, which may not be compatible with the bit rate. Let's say that the CPU runs 100 instructions per second and you want to send out 40 bits per second. This is not possible because 100 isn't divisible by 40. So the CPU will try to send out a number of bits as close to 40 as possible. In almost all circumstances it doesn't not matter that much.
We cannot ue delay to calculate very short amounts of time, because of the same reason that is mentioned in the answer above. the delay method is based on time, not on CPU clock cycles so it tries to approximate the requested delay. In order to do that it has to perform some calculations and is very inaccurate if used to skip few CPU cycles. Having a for loop that does nothing is more reliable.
If you have a modern computing device (laptop, mobile phone etc.) it probably has some kind of a secure chip which holds some kind of a password. This is in order to compartmentalise tasks and make your device more secure -- password is stored on a chip designed for password storage and not anywhere else.
This password should not be directly accessible, but rather it should only be possible to check if the user supplied password is correct or use that password for encryption. If you gain access to that chip (e.g. you steal the device) you may be able to perform one of the attacks and recover the password.
Yes, for example Xbox 360 was hacked using a power glitch attack. There's also a somewhat popular device type called unlooper, which is meant to use power glitches in order to break the security of smart cards.
That's great! You should have all the code and the instructions covered in this workshop. Just buy two Arduino Unos, logic analyser, breadboard, some wires, resistors and transistors. It's not that expensive and you're going to have lots of fun.
Don't worry, there are people who are researching IT security and making the world a safer place. Making that research universally accessible actually is useful for the overall state of the security, as it keeps everyone aware and alert.
No! The worst thing that happened quite a few times is that during the power glitching workshop someone managed to glitch the bootloader and the bootloader had to be re-burned onto a chip. It's a bit of a hassle (you need two Arduino boards connected in a specific way) but nothing too hard to do.
What I did manage to do is break one of the ATMega328 pins off while setting up the scene for the photos. Fortunately rs-online has free overight delivery.
Feel free to ask them on my Twitter: @maldr0id. Thank you and enjoy your day!