Skip to content

Latest commit

 

History

History
61 lines (46 loc) · 2.12 KB

README.md

File metadata and controls

61 lines (46 loc) · 2.12 KB
Raw

Validate with hassfest HACS Validation hacs_badge Code style: black

D-Link HNAP

This is an experimental integration to Home Assistant supporting D-Link devices. It communicates locally with the devices, i.e. no cloud needed, but only supports polling.

The following devices are supported:

  • Motion Sensor (DCH-S150)
  • Water Leakage Sensor (DCH-S160 and DCH-S161)

DISCLAIMER: Currently I don't use any of these devices. So I cannot test the integration. It is provided as reference and for the community to maintain. Please send PRs!

Installation

HACS (preferred method)

This integration is available in the default repository list, just search for it!

Manual install

Place the custom_components folder in your configuration directory (or add its contents to an existing custom_components folder).

Configuration

This integration does not support config flows yet, so you need to add it in configuration.yaml:

binary_sensor:
  - platform: dlink_hnap
    name: Kitchen Motion
    host: 10.0.0.10
    type: motion
    username: Admin
    password: 123456
    timeout: 35
  - platform: dlink_hnap
    name: Kitchen Leakage
    host: 10.0.0.11
    type: water
    username: Admin
    password: 123456

Here are the configuration options:

key optional type default description
name True string D-Link Motion Sensor Name for the sensor
type False string Sensor type: motion or water
host False string IP address to sensor
username True string Admin Username for authentication (always Admin)
password False int PIN code written on the device
timeout True int 35 Amount of seconds before sensor going to off after last motion (only used when type is motion)