-
Notifications
You must be signed in to change notification settings - Fork 58
Internal LCD Port
Matthias Melcher edited this page May 10, 2024
·
5 revisions
The LCD in the MP2x00 is connected to the main board through a 20 pin flat ribbon cable (0.5mm pitch).
| Pin | Name | Function |
|---|---|---|
| 1 | GND | Ground |
| 2 | GND | |
| 3 | lcdSwVCC | |
| 4 | lcdFiltFlm | Start of frame (half frame?) sync at 13.4ms or 74.5Hz |
| 5 | lcdVccEn | |
| 6 | lcdFiltLnClk | Start of line sync at 41.2us or 24.3kHz, 320 lines |
| 7 | lcdFiltAcMod | 5ms or 200Hz (this frequency is somewhat irregular) |
| 8 | lcdFlltVdClk | two pixel sync at 640ns or 1.5MHz (this adds up to only 64 bytes per line! Why?) |
| 9 | lcdFiltD0 | 4 bit 16 grays data for two pixels at 640ns or 1.5MHz |
| 10 | lcdFiltD1 | |
| 11 | lcdFiltD2 | |
| 12 | lcdFiltD3 | |
| 13 | lcdFiltD4 | |
| 14 | lcdFiltD5 | |
| 15 | lcdFiltD6 | |
| 16 | lcdFiltD7 | |
| 17 | d21VVc | |
| 18 | lcdSwVCC | |
| 19 | GND | |
| 20 | GND |