Skip to content

Latest commit

 

History

History
111 lines (87 loc) · 5.05 KB

gnmi_extensions.md

File metadata and controls

111 lines (87 loc) · 5.05 KB

gNMI extensions on the Northbound interface

gNMI is designed primarily as a device management interface, and augmenting it with the extra functionality to do network wide configuration management across many devices requires some extension.

Use of target in the NBI

In gNMI the Path type is comprised of a set of path elements and a target. In the onos-config NBI this target represents the name of the device as it is held in the configuration system. Configurations can be explored through the onos cli like:

> onos config get configs
Device2-2.0.0	(Device2)	2.0.0	TestDevice	2019-05-09T18:00:00+01:00
	oOqIgEg82ZvVcF7Q3xEDpWAoPcw=
stratum-sim-1-1.0.0	(stratum-sim-1)	1.0.0	Stratum	2019-06-05T11:03:17+01:00
	hPE88W6rrt5TskCTxtoB1n0hr3I=
...

In the example above stratum-sim-1 is the device associated with the configuration stratum-sim-1-1.0.0.

Therefore when using a gNMI client like gnmi_cli (see gnmi.md) the target can be specified like

gnmi_cli -get -address localhost:5150 \
    -proto "path: <target: 'stratum-sim-1', elem: <name: 'system'> elem:<name:'config'> elem: <name: 'motd-banner'>>" \
...

The following rules apply when a prefix is present in the request:

  • The target in the prefix always takes precedence over any others
  • If no target is given in the prefix it is an error

Special case to get all device names

When doing a GetRequest if * is given as a target then the request returns a simple listing of all device names present in the system (with their version). Any path elements are ignored in this special case.

Managing configuration objects

The diagram shows the internal storage structures of onos-config (in orange). The Configuration object represents the complete configuration for a particular version of a device.

Network changes can be applied across multiple Configurations (devices), and have the ability to be rolled back (by the name of the Network Change).

onos-config internals

3 different extensions have been chosen in the project to make dealing with Network Changes and Configurations through gNMI possible.

Use of Extension 100 (network change name) in SetRequest and SetResponse

In onos-config the gNMI extension number 100 has been reserved for the network change name.

SetRequest

In the SetRequest extension 100 can be used to define a name for the Network change. If it is not specified then a name is picked automatically.

There is an example of setting this extension when using gnmi_cli in gnmi.md (Northbound Set Request via gNMI)

SetResponse

In the SetResponse the name of the Network Change will always be given in extension 100 (either the given name or the generated one).

There is an example of the return of this extension through gnmi_cli in gnmi.md (Northbound Set Request via gNMI)

Use of Extension 101 (device version) in SetRequest

Extension 101 is used to set the Model version for a Configuration (as part of a Network Change). There may be multiple different configurations for a device based on version number. This extension allows the correct version of the configuration to be chosen.

If a version is given where no existing Configuration exists, an error is returned explaining that device type (extension 102 - see below) should also be specified.

If no extension 101 (version) is given, and only one Configuration already exists for that device (target), then the change is applied to that Configuration.

Use of Extension 102 (device type) in SetRequest

The target in the SetRequest contains the device name, but this is not enough to create a new Configuration if one does not exist - 3 pieces of information are required - the device name, the device type and the version (see diagram above).

Extension 102 is used to set the device type. If a Configuration already exists for this device name and version and its device type is different to what's given in extension 101, then an error is returned.

Use of Extension 103 (list of devices disconnected) in GetResponse, SetResponse, SubscribeResponse

In onos-config the gNMI extension number 103 has been reserved for the list of devices disconnected. The changes and device configuration is still valid and held by onos-config until the device arrives in the network.

GetResponse and SetResponse

In the GetResponse and GetRequest the 103 extension has an attached message containing a comma separated list of devices, e.g device1,device2,device3 signaling which devices in the request are not yet connected to onos-config.

SubscribeResponse

In the SubscribeResponse the 103 extension has an attached message containing a single device, e.g device1 signaling that the device in the request is not yet connected to onos-config but a configuration object has been changed. in Subscribe there is one device per response since it's a 1:1 relationship path to update, where the path include one device.