Skip to content

Latest commit

 

History

History
156 lines (123 loc) · 5.87 KB

getting_started.md

File metadata and controls

156 lines (123 loc) · 5.87 KB
Raw

Getting started with Android Virtualization Framework

Step 1: Prepare a device

We support the following devices:

  • aosp_panther (Pixel 7)
  • aosp_cheetah (Pixel 7 Pro)
  • aosp_oriole (Pixel 6)
  • aosp_raven (Pixel 6 Pro)
  • aosp_felix (Pixel Fold)
  • aosp_tangopro (Pixel Tablet)
  • aosp_cf_x86_64_phone (Cuttlefish a.k.a. Cloud Android). Follow this instruction to use.

Note on Pixel 6 and 6 Pro

AVF is shipped in Pixel 6 and 6 Pro, but isn't enabled by default. To enable it, follow the instructions below:

  1. If the device is running Android 13 or earlier, upgrade to Android 14.

  2. Once upgraded to Android 14, execute the following command to enable pKVM.

    adb reboot bootloader
fastboot flashing unlock
fastboot oem pkvm enable
fastboot reboot

Note on Cuttlefish

Cuttlefish does not support protected VMs. Only non-protected VMs are supported.

Step 2: Build Android image

This step is optional unless you want to build AVF by yourself or try the in-development version of AVF.

AVF is implemented as an APEX named com.android.virt. However, in order for you to install it to your device (be it Pixel or Cuttlefish), you first need to re-build the entire Android from AOSP. This is because the official Android build you have in your device is release-key signed and therefore you can't install your custom-built AVF APEX to it - because it is test-key signed.

Pixel

  1. Download source code from AOSP. Use the main branch.

  2. Download the preview vendor blob that matches your device.

  3. Build the aosp_ variant of your device. For example, if your device is Pixel 7 (panther), build aosp_panther.

  4. Flash the built images to the device.

Cuttlefish

  1. Download source code from AOSP. Use the main branch.

  2. Build Cuttlefish:

    source build/envsetup.sh
lunch aosp_cf_x86_64_phone-userdebug
m

  3. Run Cuttlefish:

    cvd start

Step 3: Build AVF

Then you can repeat building and installing AVF to the device as follows:

  1. Build the AVF APEX.

    banchan com.android.virt aosp_arm64
UNBUNDLED_BUILD_SDKS_FROM_SOURCE=true m apps_only dist

    Replace aosp_arm64 with aosp_x86_64 if you are building for Cuttlefish.

  2. Install the AVF APEX to the device.

    adb install out/dist/com.android.virt.apex
adb reboot; adb wait-for-device

Step 4: Run a Microdroid VM

Microdroid is a lightweight version of Android that is intended to run on pVM. You can run a Microdroid-based VM with an empty payload using the following command:

packages/modules/Virtualization/vm/vm_shell.sh start-microdroid --auto-connect -- --protected

You will see the log messages like the below.

found path /apex/com.android.virt/app/EmptyPayloadAppGoogle@MASTER/EmptyPayloadAppGoogle.apk
creating work dir /data/local/tmp/microdroid/7CI6QtktSluD3OZgv
apk.idsig path: /data/local/tmp/microdroid/7CI6QtktSluD3OZgv/apk.idsig
instance.img path: /data/local/tmp/microdroid/7CI6QtktSluD3OZgv/instance.img
Created VM from "/apex/com.android.virt/app/EmptyPayloadAppGoogle@MASTER/EmptyPayloadAppGoogle.apk"!PayloadConfig(VirtualMachinePayloadConfig { payloadBinaryName: "MicrodroidEmptyPayloadJniLib.so" }) with CID 2052, state is STARTING.
[2023-07-07T14:50:43.420766770+09:00 INFO  crosvm] crosvm started.
[2023-07-07T14:50:43.422545090+09:00 INFO  crosvm] CLI arguments parsed.
[2023-07-07T14:50:43.440984015+09:00 INFO  crosvm::crosvm::sys::unix::device_helpers] Trying to attach block device: /proc/self/fd/49
[2023-07-07T14:50:43.441730922+09:00 INFO  crosvm::crosvm::sys::unix::device_helpers] Trying to attach block device: /proc/self/fd/54
[2023-07-07T14:50:43.462055141+09:00 INFO  crosvm::crosvm::sys::unix::device_helpers] Trying to attach block device: /proc/self/fd/63
[WARN] Config entry DebugPolicy uses non-zero offset with zero size
[WARN] Config entry DebugPolicy uses non-zero offset with zero size
[INFO] pVM firmware
avb_slot_verify.c:443: ERROR: initrd_normal: Hash of data does not match digest in descriptor.
[INFO] device features: SEG_MAX | RO | BLK_SIZE | RING_EVENT_IDX | VERSION_1 | ACCESS_PLATFORM
[INFO] config: 0x201a000
[INFO] found a block device of size 50816KB
[INFO] device features: SEG_MAX | BLK_SIZE | FLUSH | DISCARD | WRITE_ZEROES | RING_EVENT_IDX | VERSION_1 | ACCESS_PLATFORM
[INFO] config: 0x2022000
[INFO] found a block device of size 10304KB
[INFO] No debug policy found.
[INFO] Starting payload...
<omitted>
07-07 05:52:01.322    69    69 I vm_payload: vm_payload: Notified host payload ready successfully
07-07 05:52:01.364    70    70 I adbd    : persist.adb.watchdog set to ''
07-07 05:52:01.364    70    70 I adbd    : persist.sys.test_harness set to ''
07-07 05:52:01.365    70    70 I adbd    : adb watchdog timeout set to 600 seconds
07-07 05:52:01.366    70    70 I adbd    : Setup mdns on port= 5555
07-07 05:52:01.366    70    70 I adbd    : adbd listening on vsock:5555
07-07 05:52:01.366    70    70 I adbd    : adbd started
#

The --auto-connect option provides you an adb-shell connection to the VM. The shell promot (#) at the end of the log is for that.

Step 5: Run tests

There are various tests that spawn guest VMs and check different aspects of the architecture. They all can run via atest.

atest MicrodroidHostTestCases
atest MicrodroidTestApp

If you run into problems, inspect the logs produced by atest. Their location is printed at the end. The host_log_*.zip file should contain the output of individual commands as well as VM logs.