Skip to content

Latest commit

 

History

History
91 lines (62 loc) · 3.84 KB

README.md

File metadata and controls

91 lines (62 loc) · 3.84 KB
Raw

raspberrypi-kernel64-rt

Realtime kernel package for 64-bit raspberry pi (kernel version 6.1.21 and package raspberrypi-kernel_1.20230405-1_arm64.deb in version (with epoche) 1:1.20230405-1).

To use LinuxCNC on an raspberry pi a realtime kernel is needed. Unfortunately there is no official package in the repository. So I decided to do it on my own as described here.

The official raspberry pi kernel with the realtime patch is taken.

The kernel is cross compiled (Kubuntu 22.10) as described here. Creating an raspberrypi-kernel package (like the official one) is very complex (see here), therefore I am using a quick and dirty solution which is described later. This package replaces the raspberrypi-kernel_<version>_arm64.deb from the offical repository.

The kernel is configured as follows (was adopted from rpi-rt-kernel):

--disable CONFIG_VIRTUALIZATION
--enable CONFIG_PREEMPT_RT
--disable CONFIG_RCU_EXPERT
--enable CONFIG_RCU_BOOST
--enable CONFIG_SMP
--disable CONFIG_BROKEN_ON_SMP
--set-val CONFIG_RCU_BOOST_DELAY 500

Building the realtime kernel locally (cross compile)

First install Git and the build dependencies:

sudo apt install git bc bison flex libssl-dev make libc6-dev libncurses5-dev

Install the 64-bit toolchain for a 64-bit kernel:

sudo apt install crossbuild-essential-arm64

Checkout the branch which fits to your installed official raspberrypi-kernel_<version>_arm64.deb version:

# Master always provides the latest supported version.
git clone https://github.com/theAndreas/raspberrypi-kernel64-rt -b <version> --depth 1

Run the kernel build script:

cd raspberrypi-kernel64-rt
sh build-kernel.sh

The kernel is built into the ./build folder. All necessary files are installed into the ./install folder with default structure. This structure is different to the raspberry pi structure. The files can not be copied to the raspberry pi sd card! If you want to install the kernel without the package, the structure in the ./deb-package/raspberrypi-kernel folder must be used.

Building the realtime kernel package

Run the debian package build script:

sh build-deb-package.sh

The raspberrypi-kernel_<version>_arm64.deb is located in the ./deb-package folder.

Installing the realtime kernel package

First backup your sd card image! The old kernel is not backed up!

As already described, building a debian kernel package is not that easy, because of the vfat boot partition. So the built package can only be installed, but not reinstalled or upgraded. Therefore the old package must be removed with ignoring the dependencies. Only then the new package can be installed. This can not be done with apt. Only dpkg allows this.

Copy the raspberrypi-kernel_<version>_arm64.deb to your raspberry pi and call the following commands:

sudo dpkg -r --force-depends raspberrypi-kernel
sudo dpkg -i ./raspberrypi-kernel_<version>_arm64.deb

Or use the ./install-deb.sh script, which must be in the same folder as the deb package:

sudo sh install-deb.sh

Optionally set the raspberry pi kernel package to hold, to prevent from updating to newer official versions:

apt-mark hold raspberrypi-kernel

After a reboot of the raspberry pi uname -a should print SMP and PREEMPT_RT

uname -a
# Output: Linux raspberrypi <version> #1 SMP PREEMPT_RT ...