config.ini.dist

[Settings]
; Use different scanner_name if you have several instances for better debugging
scanner_name=Living room
; By default hci0 in RPI3, but you can check with "hciconfig" command
bt_interface=hci0
; Domoticz IP and UDP port where plugin runs
server_ip=192.168.0.10
server_port=2221
; Check battery if signal strength >= setting
; Connection will not be established if signal is very low
battery_check_rssi_threshold=-75
; Time to check battery. 24h. Interval check_time + 30min
battery_check_time=03:00
; Attempts to check in time interval when beacon available
battery_check_attempts=2

; Beacon MAC address
[00:00:00:00:00:00]
; For better debug
label=key tag
; Supports battery check for nut3 and miband2
; Can be empty (battery check disabled)
battery_service_type=nut3
; Signal strength threshold,
; When signal lower the setting -> beacon info will not send to the plugin
; Can be empty (threshold disabled)
rssi_threshold=

[00:00:00:00:00:01]
label=mi band 2
battery_service_type=miband2
rssi_threshold=-120

[00:00:00:00:00:03]
label=tag 3
battery_service_type=
rssi_threshold=-60