dif_spi_device.h

// Copyright lowRISC contributors (OpenTitan project).
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0

#ifndef OPENTITAN_SW_DEVICE_LIB_DIF_DIF_SPI_DEVICE_H_
#define OPENTITAN_SW_DEVICE_LIB_DIF_DIF_SPI_DEVICE_H_

/**
 * @file
 * @brief <a href="/hw/ip/spi_device/doc/">SPI Device</a> Device Interface
 * Functions
 */

#include <stddef.h>
#include <stdint.h>

#include "sw/device/lib/base/macros.h"
#include "sw/device/lib/base/mmio.h"
#include "sw/device/lib/dif/dif_base.h"

#include "sw/device/lib/dif/autogen/dif_spi_device_autogen.h"

#ifdef __cplusplus
extern "C" {
#endif  // __cplusplus

/**
 * The mode that the spi device operates in.
 */
typedef enum dif_spi_device_mode {
  /**
   * spi_device will ignore all transactions in this mode configuration.
   */
  kDifSpiDeviceModeDisabled = 0,
  /**
   * In flash emulation mode, the hardware behaves like a SPI NOR flash device.
   */
  kDifSpiDeviceModeFlashEmulation = 1,
  /**
   * In pass-through mode, the hardware forwards commands to another SPI flash
   * device, with various tables providing rules for filtering and forwarding.
   * The hardware may be configured to also behave like a SPI NOR flash device,
   * with some commands and/or address regions targeting internal handling,
   * instead of being passed through.
   */
  kDifSpiDeviceModePassthrough = 2,
} dif_spi_device_mode_t;

/**
 * A bit ordering within a byte.
 */
typedef enum dif_spi_device_bit_order {
  /**
   * Represents the most-significant-bit to least-significant-bit order.
   */
  kDifSpiDeviceBitOrderMsbToLsb,
  /**
   * Represents the least-significant-bit to most-significant-bit order.
   */
  kDifSpiDeviceBitOrderLsbToMsb,
} dif_spi_device_bit_order_t;

/**
 * Runtime configuration for SPI.
 *
 * This struct describes runtime information for one-time configuration of the
 * hardware.
 */
typedef struct dif_spi_device_config {
  dif_spi_device_bit_order_t tx_order;
  dif_spi_device_bit_order_t rx_order;
  dif_spi_device_mode_t device_mode;
} dif_spi_device_config_t;

/**
 * Struct containing the relevant run-time information for the DIF.
 */
typedef struct dif_spi_device_handle {
  /**
   * Device information of the hardware.
   */
  dif_spi_device_t dev;
  /**
   * Configuration information of the hardware.
   */
  dif_spi_device_config_t config;
} dif_spi_device_handle_t;

/**
 * The length of the SPI device FIFO buffer, in bytes.
 *
 * Useful for initializing FIFO lengths: for example, for equally-sized FIFOs,
 * `rx_fifo_len` and `tx_fifo_len` would be set to `kDifSpiDeviceBufferLen / 2`.
 */
extern const uint16_t kDifSpiDeviceBufferLen;

/**
 * Initializes a SPI device handle for use.
 *
 * @param base_addr The MMIO base address of the spi_device peripheral.
 * @param[out] Out param for the initialized handle.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_init_handle(mmio_region_t base_addr,
                                        dif_spi_device_handle_t *spi);

/**
 * Configures SPI with runtime information.
 *
 * This function should need to be called once for the lifetime of `handle`.
 *
 * @param spi A SPI handle.
 * @param config Runtime configuration parameters.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_configure(dif_spi_device_handle_t *spi,
                                      dif_spi_device_config_t config);

/**
 * Turn on/off passthrough without changing any other configuration.
 *
 * This changes the mode to one of flash mode or passthrough mode. The current
 * mode must be one of those, else this function will fail.
 *
 * @param spi A SPI handle.
 * @param enable Whether to turn on passthrough mode.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_passthrough_mode(dif_spi_device_handle_t *spi,
                                                 dif_toggle_t enable);

/**
 * Get the current level of the CSB pin.
 *
 * This is available for the esoteric case where CSB is used like a slow GPIO.
 * Note that for ordinary SPI operation, software sampling of the CSB pin cannot
 * be used to determine whether it is safe to perform an operation where the
 * host must be inactive.
 *
 * @param spi A SPI handle.
 * @param[out] csb The current value of the chip-select pin (false for asserted,
 * true for deasserted).
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_csb_status(dif_spi_device_handle_t *spi,
                                           bool *csb);

/**
 * Enable the mailbox region for spi_device flash / passthrough modes.
 *
 * Allocate 1 KiB for the mailbox, starting from the provided base `address`.
 *
 * @param spi A SPI device.
 * @param address The base address of the 1 KiB mailbox. The lower 10 bits are
 * ignored.
 * @return kDifBadArg if spi is null, else kDifOk.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_enable_mailbox(dif_spi_device_handle_t *spi,
                                           uint32_t address);

/**
 * Disable the mailbox region for spi_device flash / passthrough modes.
 *
 * @param spi A SPI device.
 * @return kDifBadArg if spi is null, else kDifOk.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_disable_mailbox(dif_spi_device_handle_t *spi);

/**
 * Get the active configuration for the mailbox region.
 *
 * @param spi A SPI device.
 * @param[out] is_enabled Whether the mailbox region is enabled.
 * @param[out] address If the mailbox is enabled, the base address of the
 * mailbox region.
 * @return kDifBadArg if any argument is null, else kDifOk.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_mailbox_configuration(
    dif_spi_device_handle_t *spi, dif_toggle_t *is_enabled, uint32_t *address);

/**
 * Set the address mode of the SPI device in flash/passthrough mode.
 *
 * @param spi A SPI device.
 * @param addr_4b If kDifToggleEnabled, set the address mode to 4 Bytes.
 * Otherwise, set the address mode to 3 Bytes.
 * @return kDifBadArg if spi is NULL or addr_4b is not a valid toggle. kDifOk
 * otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_4b_address_mode(dif_spi_device_handle_t *spi,
                                                dif_toggle_t addr_4b);
/**
 * Get the address mode of the SPI device in flash/passthrough mode.
 *
 * @param spi A SPI device.
 * @param[out] addr_4b Points to toggle that will be set to `kDifToggleEnabled`
 * if the device is in 4-byte address mode, else `kDifToggleDisabled`.
 * @return kDifBadArg if spi or addr_4b are NULL. kDifOk otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_4b_address_mode(dif_spi_device_handle_t *spi,
                                                dif_toggle_t *addr_4b);

/**
 * Clear any pending software-originated flash status change requests.
 *
 * @param spi A SPI device.
 * @return kDifBadArg if spi is NULL. kDifOk otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_clear_flash_status_request(
    dif_spi_device_handle_t *spi);

typedef struct dif_spi_device_flash_id {
  /** The device ID for the SPI flash. */
  uint16_t device_id;
  /** The JEDEC manufacturer ID. */
  uint8_t manufacturer_id;
  /** The continuation code used before the `manufacturer_id` byte. */
  uint8_t continuation_code;
  /** The number of continuation codes preceding the `manufacturer_id`. */
  uint8_t num_continuation_code;
} dif_spi_device_flash_id_t;

/**
 * Get the JEDEC ID presented when in flash / passthrough modes.
 *
 * @param spi A SPI device.
 * @param[out] id Points to location that will be set to the current JEDEC ID.
 * @return kDifBadArg if spi or id are NULL. kDifOk otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_flash_id(dif_spi_device_handle_t *spi,
                                         dif_spi_device_flash_id_t *id);
/**
 * Set the JEDEC ID presented when in flash / passthrough modes.
 *
 * @param spi A SPI device.
 * @param id The JEDEC ID to set.
 * @return kDifBadArg if spi is NULL. kDifOk otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_flash_id(dif_spi_device_handle_t *spi,
                                         dif_spi_device_flash_id_t id);

/**
 * Represents which optional hardware features may intercept commands in
 * passthrough mode. If selected, the function will be handled internally and
 * not passed to the downstream SPI flash (sometimes with conditions, such as
 * the address matching the mailbox region when mailbox interception is
 * selected).
 */
typedef struct dif_spi_device_passthrough_intercept_config {
  /**
   * Whether to intercept commands to the status registers, such as WriteStatus
   * and ReadStatus.
   */
  bool status;
  /**
   * Whether to intercept the ReadID command and respond with the JEDEC ID
   * programmed via `dif_spi_device_set_flash_id()`.
   */
  bool jedec_id;
  /**
   * Whether to intercept the ReadSFDP command with data programmed to the
   * internal SFDP region.
   */
  bool sfdp;
  /**
   * Whether to intercept read memory commands with data programmed in the
   * mailbox buffer, when the address is inside the mailbox region.
   */
  bool mailbox;
} dif_spi_device_passthrough_intercept_config_t;

/**
 * Configure the optional hardware functions to intercept passthrough commands.
 *
 * @param spi A SPI handle.
 * @param config The passthrough interception configuration.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_passthrough_intercept_config(
    dif_spi_device_handle_t *spi,
    dif_spi_device_passthrough_intercept_config_t config);

/**
 * Get the last address read from the flash memory that was not in the mailbox
 * region.
 *
 * @param spi A SPI handle.
 * @param[out] address The last address read.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_last_read_address(dif_spi_device_handle_t *spi,
                                                  uint32_t *address);

/**
 * Set the read threshold watermark for reporting to the corresponding interrupt
 * status bit.
 *
 * This function is intended to be used in flash mode for devices that
 * sequentially read from address 0 to the end of some initial block. A supplied
 * address of 0 disables the watermark status bit and interrupt.
 *
 * @param spi A SPI handle.
 * @param address The watermark address that triggers reporting to the read
 * threshold watermark's status bit, which can signal an interrupt.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_eflash_read_threshold(
    dif_spi_device_handle_t *spi, uint32_t address);

/**
 * Clear eflash read buffer state.
 *
 * Reinitialize the eflash read buffer to initial state.
 *
 * @param spi A SPI device.
 * @return kDifBadArg if spi is NULL. kDifOk otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_reset_eflash_buffer(dif_spi_device_handle_t *spi);

typedef enum dif_spi_device_flash_address_type {
  /** No address for this command */
  kDifSpiDeviceFlashAddrDisabled = 0,
  /** Address size for this command is determined by the current address mode */
  kDifSpiDeviceFlashAddrCfg,
  /** Address size for this command is fixed at 3 bytes */
  kDifSpiDeviceFlashAddr3Byte,
  /** Address size for this command is fixed at 4 bytes */
  kDifSpiDeviceFlashAddr4Byte,
  kDifSpiDeviceFlashAddrCount,
} dif_spi_device_flash_address_type_t;

/** An enum describing the type of I/O width used by a command's payload. */
typedef enum dif_spi_device_payload_io {
  /** Command does not have a payload. */
  kDifSpiDevicePayloadIoNone = 0x0,
  /** Command's payload has an I/O channel width of 1. */
  kDifSpiDevicePayloadIoSingle = 0x1,
  /** Command's payload has an I/O channel width of 2. */
  kDifSpiDevicePayloadIoDual = 0x3,
  /** Command's payload has an I/O channel width of 4. */
  kDifSpiDevicePayloadIoQuad = 0xf,
  /** The command info slot had an invalid setting for the payload I/O width. */
  kDifSpiDevicePayloadIoInvalid = 0x10,
} dif_spi_device_payload_io_t;

typedef enum dif_spi_device_read_pipeline_mode {
  /** No additional flash payload read pipeline stages. */
  kDifSpiDeviceReadPipelineModeZeroStages = 0,
  /**
   * Add 2-stage pipeline to command read output. Perform half-cycle sampling on
   * the incoming data.
   */
  kDifSpiDeviceReadPipelineModeTwoStagesHalfCycle,
  /**
   * Add 2-stage pipeline to command read output. Perform full-cycle sampling on
   * the incoming data.
   */
  kDifSpiDeviceReadPipelineModeTwoStagesFullCycle,
  kDifSpiDeviceReadPipelineModeCount,
} dif_spi_device_read_pipeline_mode_t;

typedef struct dif_spi_device_flash_command {
  /** The opcode for this command. */
  uint8_t opcode;
  /* The presence and type of the address phase of this command. */
  dif_spi_device_flash_address_type_t address_type;
  /** The number of dummy cycles between the address phase and the payload phase
   * of a command. Note that if `payload_io_width` is
   * `kDifSpiDevicePayloadIoNone`, a nonzero value may cause undefined behavior,
   * possibly including the device assuming dummy cycles are part of this
   * payload-less command.
   */
  uint8_t dummy_cycles;
  /** The I/O width for the payload phase of this command. */
  dif_spi_device_payload_io_t payload_io_type;
  /**
   * Whether to translate the address using the address swap mask and value
   * provided to `dif_spi_device_passthrough_set_swap_address()`. Incompatible
   * with a command with `address_type` that is
   * `kDifSpiDeviceFlashAddrDisabled`.
   */
  bool passthrough_swap_address;
  /** Whether the SPI host is receiving this command's payload phase. */
  bool payload_dir_to_host;
  /** Whether to swap up to the first 32 bits of the payload. */
  bool payload_swap_enable;
  /** The read payload pipeline mode to use for this command. */
  dif_spi_device_read_pipeline_mode_t read_pipeline_mode;
  /** Whether to upload the command to the payload FIFO. */
  bool upload;
  /** Whether to set the busy bit in the status register. */
  bool set_busy_status;
} dif_spi_device_flash_command_t;

typedef enum dif_spi_device_flash_buffer_type {
  /** eFlash region */
  kDifSpiDeviceFlashBufferTypeEFlash = 0,
  /** Mailbox region */
  kDifSpiDeviceFlashBufferTypeMailbox,
  /** SFDP region */
  kDifSpiDeviceFlashBufferTypeSfdp,
  /** Count of buffer types */
  kDifSpiDeviceFlashBufferTypes,
} dif_spi_device_flash_buffer_type_t;

/**
 * Set up the indicated command info slot for flash / passthrough modes.
 *
 * @param spi A handle to a spi device.
 * @param slot A command info slot ID.
 * @param enable Whether to enable or disable the command slot.
 * @param command_info If `enable` is set, provides the configuration for the
 *        command.
 * @return `kDifBadArg` if `spi` is NULL or `slot` is larger than the number of
 * command slots. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_flash_command_slot(
    dif_spi_device_handle_t *spi, uint8_t slot, dif_toggle_t enable,
    dif_spi_device_flash_command_t command_info);

/**
 * Get the current configuration of the indicated command info slot.
 *
 * @param spi A handle to a spi device.
 * @param slot A command info slot ID.
 * @param[out] enabled A pointer to where the current slot state can be stored.
 * @param[out] command_info If `enabled`, points to where the current command
 * configuration can be stored.
 * @return `kDifBadArg` if any pointers are NULL or `slot` is larger than the
 * number of command slots. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_flash_command_slot(
    dif_spi_device_handle_t *spi, uint8_t slot, dif_toggle_t *enabled,
    dif_spi_device_flash_command_t *command_info);

/**
 * Configure the command properties of the hardware's EN4B function.
 *
 * EN4B is the command to activate 4-byte addressing for flash and passthrough
 * modes.
 *
 * @param spi A handle to a spi_device.
 * @param enable Whether to enable the function.
 * @param opcode Which opcode activates the function.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_configure_flash_en4b_command(
    dif_spi_device_handle_t *spi, dif_toggle_t enable, uint8_t opcode);

/**
 * Configure the command properties of the hardware's EX4B function.
 *
 * EX4B is the command to deactivate 4-byte addressing for flash and passthrough
 * modes. This would return the device to the 3-byte address mode.
 *
 * @param spi A handle to a spi_device.
 * @param enable Whether to enable the function.
 * @param opcode Which opcode activates the function.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_configure_flash_ex4b_command(
    dif_spi_device_handle_t *spi, dif_toggle_t enable, uint8_t opcode);

/**
 * Configure the command properties of the hardware's WREN function.
 *
 * WREN is the command to enable writes and set the WEL bit of the status
 * register, for flash and passthroug modes.
 *
 * @param spi A handle to a spi_device.
 * @param enable Whether to enable the function.
 * @param opcode Which opcode activates the function.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_configure_flash_wren_command(
    dif_spi_device_handle_t *spi, dif_toggle_t enable, uint8_t opcode);

/**
 * Configure the command properties of the hardware's WRDI function.
 *
 * WRDI is the command to disable writes and clear the WEL bit of the status
 * register, for flash and passthrough modes.
 *
 * @param spi A handle to a spi_device.
 * @param enable Whether to enable the function.
 * @param opcode Which opcode activates the function.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_configure_flash_wrdi_command(
    dif_spi_device_handle_t *spi, dif_toggle_t enable, uint8_t opcode);

/**
 * Set which address bits are swapped and their values for commands that have
 * the address swap enabled.
 *
 * @param spi A handle to a spi device.
 * @param mask A bitmask indicating which address bits should be replaced.
 * @param replacement The values to swap in for the masked address bits.
 * @return `kDifBadArg` if spi is NULL, else `kDifOk`.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_flash_address_swap(dif_spi_device_handle_t *spi,
                                                   uint32_t mask,
                                                   uint32_t replacement);

/**
 * Set which bits are swapped and their values for commands that have
 * the first-word payload swap function enabled.
 *
 * @param spi A handle to a spi device.
 * @param mask A bitmask indicating which bits should be replaced.
 * @param replacement The values to swap in for the masked bits.
 * @return `kDifBadArg` if spi is NULL, else `kDifOk`.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_flash_payload_swap(dif_spi_device_handle_t *spi,
                                                   uint32_t mask,
                                                   uint32_t replacement);

/**
 * Get the current occupancy level of the command FIFO. Used in flash and
 * passthrough modes.
 *
 * @param spi A SPI handle.
 * @param[out] occupancy The number of command entries present in the command
 * FIFO.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_flash_command_fifo_occupancy(
    dif_spi_device_handle_t *spi, uint8_t *occupancy);

/**
 * Get the current occupancy level of the address FIFO. Used in flash and
 * passthrough modes.
 *
 * @param spi A SPI handle.
 * @param[out] occupancy The number of address entries present in the command
 * FIFO.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_flash_address_fifo_occupancy(
    dif_spi_device_handle_t *spi, uint8_t *occupancy);

/**
 * Get the current occupancy level of the payload FIFO. Used in flash and
 * passthrough modes.
 *
 * Also get the starting offset for the data that was captured. Only up to 256
 * bytes of payload may be captured by the SPI device, and if the SPI host sends
 * more data, the SPI device wraps around to the beginning of the payload buffer
 * and writes the newest data from there. The starting offset points to the
 * oldest item in the payload buffer.
 *
 * @param spi A SPI handle.
 * @param[out] occupancy The number of bytes present in the command FIFO.
 * @param[out] start_offset The starting offset in the payload buffer for the
 * data, which may wrap around to the beginning.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_flash_payload_fifo_occupancy(
    dif_spi_device_handle_t *spi, uint16_t *occupancy, uint32_t *start_offset);

/**
 * Pop the first command from the uploaded command FIFO.
 *
 * @param spi A handle to a spi device.
 * @param[out] command A pointer to where the command can be stored.
 * @return `kDifBadArg` if any pointers are NULL. `kDifUnavailable` if the FIFO
 * was empty. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_pop_flash_command_fifo(dif_spi_device_handle_t *spi,
                                                   uint8_t *command);

/**
 * Pop the first address from the uploaded address FIFO.
 *
 * @param spi A handle to a spi device.
 * @param[out] address A pointer to where the address can be stored.
 * @return `kDifBadArg` if any pointers are NULL. `kDifUnavailable` if the FIFO
 * was empty. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_pop_flash_address_fifo(dif_spi_device_handle_t *spi,
                                                   uint32_t *address);

/**
 * Read data from the payload buffer associated with flash / passthrough modes.
 *
 * @param spi A handle to a spi device.
 * @param offset The starting offset for read data in the memory.
 * @param length The length, in bytes, of the data to be copied.
 * @param[out] buf A pointer to the location where the data should be stored.
 * @return `kDifBadArg` is any pointers are NULL or the `buffer_type` does not
 * exist. `kDifOutOfRange` if the requested `offset` and `length` go beyond the
 * payload buffer region. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_read_flash_payload_buffer(
    dif_spi_device_handle_t *spi, uint32_t offset, size_t length, uint8_t *buf);

/**
 * Write data to one of the memories associated with flash / passthrough modes.
 *
 * @param spi A handle to a spi device.
 * @param buffer_type An identifier for which memory space to write to.
 * @param offset The starting offset for the write location of the data.
 * @param length The length, in bytes, of the data to be copied.
 * @param buf A pointer to the location where the data can be copied from.
 * @return `kDifBadArg` is any pointers are NULL or the `buffer_type` does not
 * exist. `kDifOutOfRange` if the requested `offset` and `length` go beyond the
 * indicated `buffer_type` region. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_write_flash_buffer(
    dif_spi_device_handle_t *spi,
    dif_spi_device_flash_buffer_type_t buffer_type, uint32_t offset,
    size_t length, const uint8_t *buf);

/**
 * Get whether the indicated command is filtered for passthrough.
 *
 * @param spi A handle to a spi device.
 * @param command The command to be queried.
 * @param[out] enabled A pointer to a location where the filter status can be
 * stored. `kDifEnabled` means the command is filtered.
 * @return `kDifBadArg` if any pointers are NULL. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_passthrough_command_filter(
    dif_spi_device_handle_t *spi, uint8_t command, dif_toggle_t *enabled);

/**
 * Set whether the indicated command is filtered for passthrough.
 *
 * @param spi A handle to a spi device.
 * @param command The command to have its filter status updated.
 * @param enable Whether to enable the command filter for the `command`.
 * @return `kDifBadArg` if `spi` is NULL or `enable` is invalid. `kDifOk`
 * otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_passthrough_command_filter(
    dif_spi_device_handle_t *spi, uint8_t command, dif_toggle_t enable);

/**
 * Set whether ALL commands are filtered for passthrough.
 *
 * Can be used for a faster initial state before using
 * `dif_spi_device_set_passthrough_command_filter` to set the filter status for
 * individual commands.
 *
 * @param spi A handle to a spi device.
 * @param enable Whether to enable the command filter for all commands.
 * @return `kDifBadArg` if `spi` is NULL or `enable` is invalid. `kDifOk`
 * otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_all_passthrough_command_filters(
    dif_spi_device_handle_t *spi, dif_toggle_t enable);

/**
 * Clear the busy bit and write-enable bit for flash / passthrough modes.
 *
 * @param spi A handle to a spi device.
 * @return `kDifBadArg` if `spi` is NULL. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_clear_flash_busy_bit(dif_spi_device_handle_t *spi);

/**
 * Write the status registers for flash / passthrough modes.
 *
 * Note that the three registers are concatenated to make one 24-bit value, with
 * the LSB being the busy bit.
 *
 * @param spi A handle to a spi device.
 * @param value The value to write to the registers.
 * @return `kDifBadArg` if `spi` is NULL. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_set_flash_status_registers(
    dif_spi_device_handle_t *spi, uint32_t value);

/**
 * Get the values of the status registers for flash / passthrough modes.
 *
 * Note that the three registers are concatenated to make one 24-bit value, with
 * the LSB being the busy bit.
 *
 * @param spi A handle to a spi device.
 * @param[out] value A pointer to where to write the values of the registesr.
 * @return `kDifBadArg` if any pointer arguments are NULL. `kDifOk` otherwise.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_flash_status_registers(
    dif_spi_device_handle_t *spi, uint32_t *value);

typedef struct dif_spi_device_tpm_caps {
  /** Hardware revision of the TPM submodule. */
  uint8_t revision;
  /**
   * True if the TPM supports 5 Locality. Otherwise, only 1 Locality is
   * supported.
   */
  bool multi_locality;
  /**
   * The maximum write size, in bytes, of the data phase of TPM
   * transactions. This represents the maximum amount of data the FIFO can
   * accept.
   */
  uint8_t max_write_size;
  /**
   * The maximum read size, in bytes, of the data phase of TPM
   * transactions. This represents the maximum amount of data the FIFO can
   * accept.
   */
  uint8_t max_read_size;
} dif_spi_device_tpm_caps_t;

/**
 * Read the capabilities of the TPM hardware IP.
 *
 * @param spi A handle to a spi device.
 * @param[out] caps The TPM's hardware capabilities.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_get_tpm_capabilities(
    dif_spi_device_handle_t *spi, dif_spi_device_tpm_caps_t *caps);

typedef enum dif_spi_device_tpm_interface {
  /** Specifies the FIFO interface from the TPM specification. */
  kDifSpiDeviceTpmInterfaceFifo = 0,
  /** Specifies the CRB interface from the TPM specification. */
  kDifSpiDeviceTpmInterfaceCrb,
  kDifSpiDeviceTpmInterfaceCount,
} dif_spi_device_tpm_interface_t;

typedef struct dif_spi_device_tpm_config {
  /**
   * The register interface to implement for the TPM. Note that in CRB mode, the
   * return-by-hardware logic is disabled.
   */
  dif_spi_device_tpm_interface_t interface;
  /**
   * Upload the commands that would ordinarily be targeted towards registers
   * that automatically return by hardware. This includes TPM_DID_VID_x,
   * TPM_RID_x, TPM_STS_x, and TPM_ACCESS_x.
   */
  bool disable_return_by_hardware;
  /**
   * Disable address prefix check that matches the pattern 0xD4_XXXX before
   * using the return-by-hardware logic. When true, the upper 8 bits of the
   * address are not required to be 0xD4 for the return-by-hardware logic to
   * activate. When false, commands with non-matching addresses will be
   * uploaded.
   */
  bool disable_address_prefix_check;
  /**
   * Disable locality value check to be within the max value before using the
   * return-by-hardware logic. When true, the TPM will return 0xFF-valued data
   * on reads and discard writes to registers in the TPM region (matching the
   * 0xD4_XXXX address pattern) if the locality value is above the maximum. When
   * false, commands with invalid locality will be uploaded, and software would
   * be responsible for returning 0xFF to read requests.
   */
  bool disable_locality_check;
} dif_spi_device_tpm_config_t;

/**
 * Configure the TPM within a SPI device.
 *
 * The TPM circuit has a separate chip-select input but shares the clock and
 * data pins of the rest of the spi_device. The TPM can be enabled alongside
 * the other data path (for generic/flash/passthrough modes).
 *
 * @param spi A handle to a spi device.
 * @param enable Whether to enable the TPM block.
 * @param config The TPM configuration.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_configure(dif_spi_device_handle_t *spi,
                                          dif_toggle_t enable,
                                          dif_spi_device_tpm_config_t config);

typedef struct dif_spi_device_tpm_data_status {
  /** True if a command and address have been captured and are can be read. */
  bool cmd_addr_valid;
  /** True if the write FIFO is under software's exclusive use. */
  bool wrfifo_acquired;
  /** True if the last command targeted the Read FIFO and was aborted. */
  bool rdfifo_aborted;
} dif_spi_device_tpm_data_status_t;

/**
 * Get the current status of the TPM's data FIFOs and command / address
 * register.
 *
 * @param spi A handle to a spi device.
 * @param[out] status The status of the TPM.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_get_data_status(
    dif_spi_device_handle_t *spi, dif_spi_device_tpm_data_status_t *status);

/**
 * Set the value for the TPM_ACCESS_x register, for use when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param locality Which TPM_ACCESS_x register to target, indexed by the
 * locality.
 * @param value The value to set the TPM_ACCESS_x register to.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_set_access_reg(dif_spi_device_handle_t *spi,
                                               uint8_t locality, uint8_t value);

/**
 * Get the value of the TPM_ACCESS_x register that is used when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param locality Which TPM_ACCESS_x register to query, indexed by the
 * locality.
 * @param[out] value The value of the TPM_ACCESS_x register.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_get_access_reg(dif_spi_device_handle_t *spi,
                                               uint8_t locality,
                                               uint8_t *value);

/**
 * Set the value for the TPM_STS register, for use when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param value The value to set the TPM_STS register to.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_set_sts_reg(dif_spi_device_handle_t *spi,
                                            uint32_t value);

/**
 * Get the value of the TPM_STS register that is used when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param[out] value The value of the TPM_STS register.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_get_sts_reg(dif_spi_device_handle_t *spi,
                                            uint32_t *value);

/**
 * Set the value for the TPM_INTF_CAPABILITY register, for use when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param value The value to set the TPM_INTF_CAPABILITY register to.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_set_intf_capability_reg(
    dif_spi_device_handle_t *spi, uint32_t value);

/**
 * Get the value of the TPM_INTF_CAPABILITY register that is used when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param[out] value The value of the TPM_INTF_CAPABILITY register.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_get_intf_capability_reg(
    dif_spi_device_handle_t *spi, uint32_t *value);

/**
 * Set the value for the TPM_INT_ENABLE register, for use when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param value The value to set the TPM_INT_ENABLE register to.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_set_int_enable_reg(dif_spi_device_handle_t *spi,
                                                   uint32_t value);

/**
 * Get the value of the TPM_INT_ENABLE register that is used when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param[out] value The value of the TPM_INT_ENABLE register.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_get_int_enable_reg(dif_spi_device_handle_t *spi,
                                                   uint32_t *value);

/**
 * Set the value for the TPM_INT_VECTOR register, for use when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param value The value to set the TPM_INT_VECTOR register to.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_set_int_vector_reg(dif_spi_device_handle_t *spi,
                                                   uint32_t value);

/**
 * Get the value of the TPM_INT_VECTOR register that is used when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param[out] value The value of the TPM_INT_VECTOR register.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_get_int_vector_reg(dif_spi_device_handle_t *spi,
                                                   uint32_t *value);

/**
 * Set the value for the TPM_INT_STATUS register, for use when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param value The value to set the TPM_INT_STATUS register to.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_set_int_status_reg(dif_spi_device_handle_t *spi,
                                                   uint32_t value);

/**
 * Get the value of the TPM_INT_STATUS register that is used when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param value[out] The value of the TPM_INT_STATUS register.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_get_int_status_reg(dif_spi_device_handle_t *spi,
                                                   uint32_t *value);

typedef struct dif_spi_device_tpm_id {
  /** The vendor ID found in the TPM_DID_VID register. */
  uint16_t vendor_id;
  /** The device ID found in the TPM_DID_VID register. */
  uint16_t device_id;
  /** The revision ID found in the TPM_RID register. */
  uint8_t revision;
} dif_spi_device_tpm_id_t;

/**
 * Set the values for the TPM_DID_VID and TPM_RID registers, for use when the
 * return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param id The values to set the registers to.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_set_id(dif_spi_device_handle_t *spi,
                                       dif_spi_device_tpm_id_t id);

/**
 * Get the values of the TPM_DID_VID and TPM_RID registers that are used when
 * the return-by-hardware mode is active for this register type.
 *
 * @param spi A handle to a spi device.
 * @param[out] value The value of the registers.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_get_id(dif_spi_device_handle_t *spi,
                                       dif_spi_device_tpm_id_t *value);

/**
 * Retrieve the command and address of the current command.
 *
 * @param spi A handle to a spi device.
 * @param[out] command The command opcode.
 * @param[out] address The address associated with the command.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_get_command(dif_spi_device_handle_t *spi,
                                            uint8_t *command,
                                            uint32_t *address);

/**
 * Write data to the TPM's ReadFIFO.
 *
 * @param spi A handle to a spi device.
 * @param length The length, in bytes, of the data to be copied.
 * @param buf A pointer to the location of the data to be copied.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_write_data(dif_spi_device_handle_t *spi,
                                           size_t length, uint8_t *buf);

/**
 * Read data from the TPM's WriteFIFO.
 *
 * @param spi A handle to a spi device.
 * @param length The length, in bytes, of the data to be copied.
 * @param[out] buf A pointer to the location where the data should be stored.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_read_data(dif_spi_device_handle_t *spi,
                                          size_t length, uint8_t *buf);

/**
 * Release the TPM's WriteFIFO back to hardware.
 *
 * @param spi A handle to a spi device.
 * @return The result of the operation.
 */
OT_WARN_UNUSED_RESULT
dif_result_t dif_spi_device_tpm_free_write_fifo(dif_spi_device_handle_t *spi);

#ifdef __cplusplus
}  // extern "C"
#endif  // __cplusplus

#endif  // OPENTITAN_SW_DEVICE_LIB_DIF_DIF_SPI_DEVICE_H_