Error message without error and corrupt Text of Error0, Error1

[Gonzo65]

Describe the bug
Since version 1.48 or 1.49 every morning I get an error message from the heating system, but there is no error. The messages of error0 and error1 are corrupt in that case.

To Reproduce
I cannot describe a procedure. The issue allways occurs in the morning (today 5:30).

Expected behavior
There should be no error message. With version 1.47 everything works as it should be.

Screenshots & Logfiles
No special error message in the log files.

Versions:

• 1.48 and above
• JS-Controller version: 7.0.3
• Node version: 20.18.1 (with version 18.x.x too)
• Operating system: linux

Additional context

[misanorot]

What do you do at 5.30?

Please share me your debug log around these time. Thx

[Gonzo65]

Over night I switch the heating system to reduced power ("RED", BetriebArtM2). At 5:30 I switch back to normal mode ("H+WW" in winter, "WW" in summer).
I looked the logging two weeks ago (as I posted this issue) and found no markable entries. But now I cannot find the logging from that day.

[misanorot]

So close it?

[Gonzo65]

Can't you find a difference that may cause the error? I would like to update to have all adapter up to date. But with that error I cannot. Please take a look if you can find something causing that problem. Best regards Dirk misanorot ***@***.***> schrieb am Mi., 18. Dez. 2024, 13:22:

…

So close it? — Reply to this email directly, view it on GitHub <#251 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AV5QIIMLR6DZ6BLQJSZLYWD2GFSJDAVCNFSM6AAAAABS7JW2D6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNJRGE4DGMJVGE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[misanorot]

I do the same thing every day, but without errors. I need your logs with the latest version.

[Gonzo65]

Okay. I installed the actual version 1.5.0. Until now no error. I switched the instance to log everything. When the error occurs I'll send the log. Or I inform you when everything is okay. misanorot ***@***.***> schrieb am Mi., 18. Dez. 2024, 20:24:

…

I do the same thing every day, but without errors. I need your logs with the latest version. — Reply to this email directly, view it on GitHub <#251 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AV5QIIORZDX3EIUSFQV6AKL2GHDYJAVCNFSM6AAAAABS7JW2D6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNJSGEYDENZQGY> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Gonzo65]

Hello, it happend again this morning. I got an error message because I check the Error0 object. I added the blockly-script which is monitoring the Error0 object, the log file and a screenshot of the Error objects inherit in the attached zip file. Hopefully you can find the issue. Best regards Dirk Am Do., 19. Dez. 2024 um 14:31 Uhr schrieb Dirk S. aus S. < ***@***.***>:

…

Okay. I installed the actual version 1.5.0. Until now no error. I switched the instance to log everything. When the error occurs I'll send the log. Or I inform you when everything is okay. misanorot ***@***.***> schrieb am Mi., 18. Dez. 2024, 20:24: > I do the same thing every day, but without errors. I need your logs with > the latest version. > > — > Reply to this email directly, view it on GitHub > <#251 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AV5QIIORZDX3EIUSFQV6AKL2GHDYJAVCNFSM6AAAAABS7JW2D6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNJSGEYDENZQGY> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[misanorot]

Hey, I don't see the attachment.

[Gonzo65]

Okay, then I try it direct here in Github.

ViessmannIssue.zip

[misanorot]

Hey, every day you are send and receive a lot of data to and from the system in a short period of time. This is very ugly. After that, the correct path guidance is not correct every time. I will check the options to optimize the code, but the short intervalls are a big problem with Vcontrold. (This is not an adapter issue)

[Gonzo65]

Hello. Thanks for your hint. But it seems more than it is. I want to visualize the heating state and therefor I need the values. I wish you a happy and healthy new year 2025. misanorot ***@***.***> schrieb am Fr., 27. Dez. 2024, 16:26:

…

Hey, every day you are send and receive a lot of data to and from the system in a short period of time. This is very ugly. After that, the correct path guidance is not correct every time. I will check the options to optimize the code, but the short intervalls are a big problem with Vcontrold. (This is not an adapter issue) — Reply to this email directly, view it on GitHub <#251 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AV5QIIJEZM6RNEKULJAVSKD2HVWSXAVCNFSM6AAAAABS7JW2D6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRTHAYDANJQHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[misanorot]

Hi, it is okay, but I think your values to visualize can wait 2 seconds or so? Your get and set commands are sent in milliseconds and this is critical . Please try the GitHub version and watch it a bit. I have tried to handle this situation a little bit better. Please give me feedback, at the moment, it is not possible to try this by my self. THX

[Gonzo65]

Hi, thank you for your work. I just installed the version 1.5.3 and will give you feedback.

Again I checked my code and my viessmann settings. I think I do not set values too often even in the code. I only selected some values from the adapter to be called at different polling times. You can have a short look. Maybe there is something wrong (see the attached pic).
ViessmannSettings.zip

[misanorot]

Hey, the settings looks good.

The problem with the high frequently pools is your script.