| Name | Count | Comment | Cost | Recommended |
|---|---|---|---|---|
| PCB | 1 | Many sites have minimum order quantities larger then 1 | $14.30 | JLCPCB |
| Plate | 1 | Many sites have minimum order quantities larger then 1 | $30.00 | JLCPCB |
| Bottom Plate | 1 | Many sites have minimum order quantities larger then 1 | $15.80 | JLCPCB |
| Pro Micro Compatible Microcontroller | 1 | I recommend the Elite-C by Keebio Make sure you order a set with header pins if you are not using a socket | $18 | https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4 |
| Diodes | 60 | Get more to be safe | $2.99 | https://keeb.io/products/1n4148-diodes |
| Hot Swap Sockets | 60 | Get more to be safe | $10 for 100 | https://kbdfans.com/products/mechanical-keyboard-switches-kailh-pcb-socket |
| M2 Screws | 100 | This is more then needed but good to be safe | ||
| M2 Standoffs | Needs to be heights with a difference of 5mm, for example 5mm and 10mm or 3mm and 8mm (Make sure the screws aren't too long in case of short standoffs) |
|||
| Rotary Encoder | 1 | Make sure this is high quality as low quality encoders can have issues | $2 | https://keeb.io/products/rotary-encoder-ec11 |
| Encoder Knob | 1 | You can find cheaper knobs on Keebio but I prefer these | $15.99 | https://www.amazon.com/dp/B071DTQ2WN |
| Switches | 60 | |||
| Keycaps | 60 | I recommend a set of uniform profile keycaps or a set of keycaps compatible with the Preonic | ||
| Plate Mount 2u Stabilizer | 1 | Currently this is not compatible with PCB mount stabilizers but this can be fixed if needed | ||
| (Optional) Microcontroller Sockets | 1 | Use these if you want the ability to change out what microcontroller you use | $4-$10 | |
| (Optional) 6mm Tactile Button | 1 | This is used as a reset button | ||
| (Optional) Braided USB Cable | 1 | Recommending Donut Cables here because they helped me out with learning some PCB design (I was not paid to say this) | $10-$20 | https://donutcables.com/ |