From 197c20d69ab873defc2413cece68b85435ad673e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Konrad=20Jasi=C5=84ski?= Date: Mon, 25 Mar 2024 09:51:34 +0100 Subject: [PATCH] Added flashing preparation instructions (#1857) --- _templates/gosund_SP111_v1_1 | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/_templates/gosund_SP111_v1_1 b/_templates/gosund_SP111_v1_1 index 59b3b5eb1..ca205d5d0 100644 --- a/_templates/gosund_SP111_v1_1 +++ b/_templates/gosund_SP111_v1_1 @@ -15,6 +15,11 @@ This layout is for PCB marked as "SP111_A_Wifi_Ver1.1". It has the "3450W max" l ![Pinout](https://user-images.githubusercontent.com/5904370/73123199-b4886e00-3f8d-11ea-8b5e-e850efaa603f.png) +To enter programming mode: +1. Power the device with GPIO2 connected to GND. Red LED should turn on. +2. After couple of seconds, remove the connection between GPIO2 and GND. The red LED should then turn off. +3. The device is ready to be flashed. + If the template doesn't work see other hardware versions of the same plug: * [Gosund SP111](gosund_SP111) * [Gosund SP111 v1.4](gosund_SP111_v1_4)