README.md

The new version of Mage2click toolset
mage2click/m2c

mage2click/docker-magento-mutagen

Mage2click Docker Configuration for Magento with mutagen.io sync for files inspired by Mark Shust's markshust/docker-magento project

Table of contents

• Docker Hub
• Usage
• Prerequisites
• Mutagen.io
• Automated Setup
• Custom CLI Commands
• Misc Info
• Credits
• License

Docker Hub

Please see available Dockerfiles on our Docker Hub Wiki page

Usage

This configuration is intended to be used as a Docker-based development environment for Magento 2.

Folders:

• compose: sample setups with Docker Compose
• lib: files used in one line setup scripts

Prerequisites

This setup assumes you are running Docker on a computer with at least 6GB of allocated RAM, a dual-core, and an SSD hard drive. Download & Install Docker Desktop for Mac (Community Edition).

This configuration has been tested on macOS.

Mutagen

This version of Docker-based development environment with mutagen sync is working fine even if it still under development, it requires the mutagen.io to be installed on your system. See the mutagen.io/documentation/introduction/installation or use Homebrew to install it on macOS

brew install havoc-io/mutagen/mutagen

Automated Setup

Run one of the commands below from the directory you want to install your project to. Existing projects can be imported as well.

Interactive mode

curl -s https://raw.githubusercontent.com/mage2click/docker-magento-mutagen/master/lib/setup | bash -s -- -i

The -i flag above (shorthand of --interactive) defines that setup script must be launched in interactive mode.
Simply follow the steps during setup initialisation to configure resulted Magento development environment.

One-line mode

curl -s https://raw.githubusercontent.com/mage2click/docker-magento-mutagen/master/lib/setup | bash -s -- --domain=magento2.test

The --domain=magento2.test above defines the hostname to use.
Script accepts also other parameters and flags to configure resulted Magento development environment.

Parameters:

• --domain=<domain> Domain to use for the project, default is magento2.test.
• --php-version=<version> PHP version to use for the project, default is 7.2. Currently supported PHP versions: 7.0, 7.1 and 7.2.
• --elasticsearch-version=<version> Elasticsearch version to use for the project, default is 6.7.2. Currently supported Elasticsearch versions: 2.4, 5.6 and 6.7.2. All versions have the analysis-phonetic plugin installed.
• --magento-archive=<path> Full path to downloaded Magento zip-archive to use in setup (optional).
• --magento-project=<path> Full path to the existing Magento project to use in setup (optional).
• --magento-db=<path> Full path to sql-file with database dump to use in setup (optional).
• --magento-version=<version> Magento version to download from the official repository, default is 2.3.3. If --magento-archive parameter is specified, this will be skipped.

Flags:

• --composer Use `composer install` command during the setup process.
• --varnish Use Varnish cache.
• --mailhog Use MailHog email testing tool.
• --rabbitmq Use RabbitMQ message-broker.
• --cron Use cron service.
• -i, --interactive Start interactive setup.
• -h, --help Show usage information.

Usage info output

curl -s https://raw.githubusercontent.com/mage2click/docker-magento-mutagen/master/lib/setup | bash -s -- -h

The -h flag above (shorthand of --help) defines that setup script must only output usage information. This command won't start the installation process.

Custom CLI Commands

• bin/bash: Drop into the bash prompt of your Docker container. The phpfpm container should be mainly used to access the filesystem within Docker.
• bin/dev-urn-catalog-generate: Generate URN's for PHPStorm and remap paths to local host. Restart PHPStorm after running this command.
• bin/cli: Run any CLI command without going into the bash prompt. Ex. bin/cli ls
• bin/clinotty: Run any CLI command with no TTY. Ex. bin/clinotty chmod u+x bin/magento
• bin/composer: Run the composer binary. Ex. bin/composer install
• bin/copyfromcontainer: Copy folders or files from container to host. Ex. bin/copyfromcontainer vendor
• bin/copytocontainer: Copy folders or files from host to container. Ex. bin/copytocontainer --all
• bin/fixowns: This will fix filesystem ownerships within the container.
• bin/fixperms: This will fix filesystem permissions within the container.
• bin/grunt: Run the grunt binary. Note that this runs the version from the node_modules directory for project version parity. Ex. bin/grunt exec
• bin/magento: Run the Magento CLI. Ex: bin/magento cache:flush
• bin/mr: Run n98-magerun2.phar inside the php-fpm container.
• bin/mutagen: Mutagen sync related commands. Accepts params start, stop or flush [html|vendor]. If flush has extra param html or vendor, only corresponded session will be flushed. Ex. bin/mutagen start
• bin/node: Run the node binary. Ex. bin/node --version
• bin/npm: Run the npm binary. Ex. bin/npm install
• bin/redis: Run a command from the redis container. Ex bin/redis redis-cli monitor
• bin/remove: Remove all stopped service containers. Accepts params -v or --volumes to remove volumes.
• bin/restart: Restarts all service containers. If one or more service names specified, only corresponded service containers will be restarted.
• bin/restart-nginx: Restart the app container (nginx) to apply new changes to nginx.conf files (src/nginx.conf).
• bin/root: Run any CLI command as root without going into the bash prompt. Ex bin/root apt-get install nano
• bin/rootnotty: Run any CLI command as root with no TTY. Ex bin/rootnotty chown -R app:app /var/www/html
• bin/self-update: Alias for bin/update.
• bin/selfupdate: Alias for bin/update.
• bin/share: Start share session over ngrok secure tunnels. Command accepts optional parameter to specify a region. Ex. bin/share eu. Available regions are us, eu, ap, au, sa, jp, in. Default is us. For proper functioning of this command, required dependencies must be installed with bin/setup/share command (one-time action). Important: on existing setups, make sure you have using magento-nginx:1.15-alpine docker images in your docker-compose.yml file!
• bin/start: Start all containers, good practice to use this instead of docker-compose up -d, as it may contain additional helpers.
• bin/status: Check the container status.
• bin/stop: Stop all containers.
• bin/update: Update the contents of the bin folder with the latest changes from the master branch and/or Docker images along with the rebuilding of corresponding containers and\or mutagen (only if needed). Accepts optional arguments -v|--version=<version> (to specify version tag or branch path to fetch from, default is master, affects only bin scripts), -i|--images updates only Docker images along with the rebuilding of corresponding containers, -m|--mutagen updates only mutagen (only if needed), -a|--all updates bin scripts, Docker images along with the rebuilding of corresponding containers and mutagen (if needed).
• bin/varnish: Run commands in the Varnish container. Ex bin/varnish varnishlog -q 'ReqURL ~ "^/$"' to monitor requests to homepage, or bin/vanirsh varnishlog -g request -q 'ReqMethod eq "PURGE"' to monitor PURGE requests.
• bin/xdebug: Disable or enable Xdebug by removing/adding corresponding .so line from/to .ini file in the PHP-FPM container. Accepts params disable or enable. Ex. bin/xdebug enable. Xdebug extension is installed but disabled by default, as well as remote connections and autostart are disabled. Use our bin/setup/xdebug command to get xdebug.* ini settings configured, or you can specify any xdebug.* settings via pub/.user.ini file inside the magento project folder.

Setup and Configuration CLI Commands

• bin/setup/elasticsearch: Enable Elasticsearch as Search Engine (6.7.2 by default, see Magento 2.3.3 Supported versions for more info).

  Flags:

  • 2.4: enable Elasticsearch 2.4
  • 5.6: enable Elasticsearch 5.6
  • 6.7.2 or no flag: enable Elasticsearch 6.7.2

• bin/setup/download: Download & extract specific Magento version to the src directory. Ex. bin/setup/download 2.3.3

• bin/setup/import: Copy files of existing Magento project to the src directory. Ex. bin/setup/import /path/to/magento/project

• bin/setup/redis: Enable Redis for Backend Cache, Page Cache and Session.

• bin/setup/share: Install Magento 2 Ngrok module for proper work of Magento with ngrok.io service. Important: on existing setups, make sure you have using magento-nginx:1.15-alpine docker images in your docker-compose.yml file!

• bin/setup/start: Run the Magento setup process to install Magento from the source code, with the optional parameter --domain=<domain> (defaults to magento2.test) and optional --composer flag. Ex. bin/setup/start --domain=magento2.test

• bin/setup/unzip: Extract downloaded Magento zip-archive to the src directory. Ex. bin/setup/unzip /path/to/magento.zip

  Varnish:

  • bin/setup/varnish Varnish-related configurations and VCL-related actions

    Flags:

    • --configure: Apply required settings to enable Varnish as Caching Application for Full Page Cache and handle cache invalidations correctly
    • --generate-vcl: Generate the default.vcl file with the default Varnish config, save it to the var/default.vcl and copy from the phpfpm container to ./src/var/default.vcl .
    • --list-vcl: Show info from varnish container with the list of loaded VCLs, and active vcl.

    Parameters:

    • --apply-vcl: Apply the specified VCL file with Varnish config (or default.vcl if no argument specified), with automated copying it from the ./src/var/ folder to the varnish container, also showing additional info about the list of loaded VCLs and active VCL before and after execution of this command.
    • --copy-vcl: Copy the specified file (or default.vcl if no argument specified) from the ./src/var/ folder to the varnish container.
    • --use-vcl: Use the specified VCL (you should specify one of the names from the bin/setup/varnish --list-vcl output - for example "boot") as active config for varnish container.

• bin/setup/n98-magerun2: Install n98-magerun2.phar to the /usr/local/bin/ folder inside the php-fpm container.

• bin/setup/xdebug: Enable remote debugging via set of xdebug.* ini settings in .user.ini file. Please see the detailed instructions of how to configure and use it on our Wiki page Xdebug & PHPStorm

Misc Info

Admin Panel

The admin panel URL is auto-generated by the setup script. You can find the URL by using the bin/magento info:admin command. The default username is john.smith and the default password is password123.

Database

The hostname of each service is the name of the service within the docker-compose.yml file. So for example, MySQL's (based on MariaDB:10.3 Docker image) hostname is db (not localhost) when accessing it from within a Docker container. Elasticsearch's hostname is elasticsearch.

Here's an example of how to connect to the MySQL cli tool of the Docker instance:

bin/cli mysql -h db -umagento -pmagento magento

You can use the bin/clinotty helper script to import a database. This example uses the root MySQL user, and looks for the dbdump.sql file in your local host directory:

bin/clinotty mysql -hdb -umagento -pmagento magento < dbdump.sql

Composer Authentication

Get your authentication keys for Magento Marketplace. For more information about Magento Marketplace authentication, see the DevDocs.

The setup script will prompt you to provide authentication information!

To manually configure authentication, copy src/auth.json.sample to src/auth.json. Then, update the username and password values with your Magento public and private keys, respectively. Finally, copy the file to the container by running bin/copytocontainer auth.json.

Redis

Redis is now the default cache and session storage engine, and is automatically configured & enabled when running bin/setup on new installs.

Use the following lines to enable Redis on existing installs:

Enable for Cache:

bin/magento setup:config:set --cache-backend=redis --cache-backend-redis-server=redis --cache-backend-redis-db=0

Enable for Full Page Cache:

bin/magento setup:config:set --page-cache=redis --page-cache-redis-server=redis --page-cache-redis-db=1

Enable for Session:

bin/magento setup:config:set --session-save=redis --session-save-redis-host=redis --session-save-redis-log-level=4 --session-save-redis-db=2

You may also monitor Redis by running: bin/redis redis-cli monitor

For more information about Redis usage with Magento, see the DevDocs.

Xdebug & PHPStorm

Please see the detailed instructions of how to configure and use it on our Wiki page Xdebug & PHPStorm

Credits

Mark Shust

Certified Magento Developer & Architect and Zend Certified Engineer, and available for consulting & development of your next project 🤓. You can read technical articles on my blog at markshust.com or contact me directly at [email protected].
Mark Shust's Free Course about Setup a Magento 2 Development Environment with Docker

Nexcess

A special thanks goes out to Nexcess for hosting public archives of every version of Magento 💙. I've used their Magento hosting services in the past also (both shared and enteprise offerings) and they're great, ...highly recommended!

Willem Wigman

Implemented Varnish support with https proxy Willem Wigman

Max Uroda

Certified Magento Developer (M1CDP+ / M2CAD), WebDeveloper interested in Magento/Magento2, Docker, JS, Varnish, PWA
@u_maxx
maxuroda.pro

Dmitry Shkoliar

Zend Certified PHP Engineer, Magento2, Docker, PWA, Varnish, JS, HTML5, Mobile, iOS, Android
@shkoliar
shkoliar.com

License

MIT

Maintainers

• Dmitry Shkoliar
• Max Uroda
• Feel free to create new GitHub issue with feature request or PR with feature/bugfix :)