ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
| ESP8266 | Loctek Motion (HS13A-1) | Loctek Motion Cable Color (HS13A-1) |
|---|---|---|
| GND | GND | Green |
| D6 | RX | Purple |
| D5 | TX | Red |
| D2 | PIN 20 | White |
| ESP8266 | Loctek Motion (HS01B-1) | Loctek Motion Cable Color (HS01B-1) |
|---|---|---|
| GND | GND | Blue |
| D6 | RX | Green |
| D5 | TX | Black |
| D2 | PIN 20 | Red |
| ESP32 | Loctek Controller (E5) | Loctek Motion Cable Color (HS01B-1) |
|---|---|---|
| GND | GND | Blue |
| GPIO16 | RX | Green |
| GPIO17 | TX | Black |
| GPIO23 | PIN 20 | Red |
| ESP32 | Loctek keypad (HS01B-1) | Loctek Motion Cable Color (HS01B-1) |
|---|---|---|
| GND | Blue (Bridged to GND from controller) | |
| RX | Green (Bridged to RX from controller) | |
| GPIO3 | TX | Black |
| GPIO22 | PIN 20 | Red |
Note: The rest of the cables can be passed through directly to the controller from the keypad. RX from controller is split between the Keypad and ESP directly
See README for more details. If your board supports a 5V input, you could use the 5V provided by the control box to power your controller as well:
| ESP8266 | Loctek Motion (HS13A-1) | Loctek Motion (HS01B-1) |
|---|---|---|
| GND | GND | GND |
| D6 | RX | RX |
| D5 | TX | TX |
| D2 | PIN 20 | PIN 20 |
| VIN | +5V (VDD) | +5V (VDD) |
Please refer to the ESPHome documentation.
You can use flexispot_ek5.yaml (HS13A-1) or flexispot_e5b.yaml (HS01B-1) as a boilerplate for your own implementation. This implementation has been created for the ESP8266 nodemcu, but can easily be adopted for other platforms and boards.
- Up to 4 presets as switch entities
- Up / Down controls via cover entity
- Current height via sensor entity
- M button via switch entity
- Wake up button via switch entity (currently just used for testing, doesn't seem functional yet)
- Support for ESP32 (E5b only)
- Support for keypad (E5b only)
