Skip to content

Latest commit

 

History

History
160 lines (118 loc) · 6.91 KB

bgp.md

File metadata and controls

160 lines (118 loc) · 6.91 KB
Raw

Configuring BGP Peers

When kube-router is used to provide pod-to-pod networking, BGP is used to exchange routes across the nodes. Kube-router provides flexible networking models to support different deployments (public vs private cloud, routable vs non-routable pod IP's, service ip's etc).

Peering Within The Cluster

Full Node-To-Node Mesh

This is the default mode. All nodes in the clusters form iBGP peering relationship with rest of the nodes forming full node-to-node mesh. Each node advertise the pod CIDR allocated to the nodes with peers (rest of the nodes in the cluster). There is no configuration required in this mode. All the nodes in the cluster are associated with private ASN 64512 implicitly (which can be configured with --cluster-asn flag). Users are transparent to use of iBGP. This mode is suitable in public cloud environments or small cluster deployments. In this mode all the nodes are expected to be L2 adjacent.

Node-To-Node Peering Without Full Mesh

This model support more than a single AS per cluster to allow AS per rack or AS per node models. Nodes in the cluster does not form full node-to-node mesh. Users has to explicitly select this mode by specifying --nodes-full-mesh=false when launching kube-router. In this mode kube-router expects each node is configured with an ASN number from the node's API object annonations. Kube-router will use the node's kube-router.io/node.asn annotation value as the ASN number for the node.

Users can annotate node objects with the following command:

kubectl annotate node <kube-node> "kube-router.io/node.asn=64512"

Only nodes with in same ASN form full mesh. Two nodes with different ASNs never get peered.

Route-Reflector setup Without Full Mesh

This model support the common scheme of using Route Reflector Server node to concentrate peering from Client Peer. This has the big advantage of not needing full mesh, and scale better. In this mode kube-router expects each node is configured either in Route Reflector server mode or in Route Reflector client mode. This is done with node kube-router.io/rr.server=ClusterID, kube-router.io/rr.client=ClusterId respectively. In this mode each Route Reflector Client will only peer with Route Reflector Servers. Each Route Reflector Server will peer other Route Reflector Server and with Route Reflector Clients enabling reflection.

Users can annotate node objects with the following command:

kubectl annotate node <kube-node> "kube-router.io/rr.server=42"

for Route Reflector server mode, and

kubectl annotate node <kube-node> "kube-router.io/rr.client=42"

for Route Reflector client mode.

Only nodes with the same ClusterID in client and server mode will peer together.

When joining new nodes to the cluster, remember to annotate them with kube-router.io/rr.client=42, and then restart kube-router on the new nodes and the route reflector server nodes to let them successfully read the annotations and peer with each other.

Peering Outside The Cluster

Global External BGP Peers

An optional global BGP peer can be configured by specifying --peer-router-asns and --peer-router-ips parameters. When configured each node in the cluster forms a peer relationship with specified global peer. Pod CIDR and Cluster IP's get advertised to the global BGP peer. For redundancy you can also configure more than one peer router by specifying a slice of BGP peers.

For example:

--peer-router-ips="192.168.1.99,192.168.1.100"
--peer-router-asns=65000,65000

Node Specific External BGP Peers

Alternativley, each node can be configured with one or more node specific BGP peers. Information regarding node specific BGP peer is read from node API object annotations:

  • kube-router.io/peer.ips
  • kube-router.io/peer.asns

For e.g users can annotate node object with below commands

kubectl annotate node <kube-node> "kube-router.io/peer.ips=192.168.1.99,192.168.1.100"
kubectl annotate node <kube-node> "kube-router.io/peer.asns=65000,65000"

AS Path Prepending

For traffic shaping purposes, you may want to prepend the AS path announced to peers. This can be accomplished on a per-node basis with annotations:

  • kube-router.io/path-prepend.as
  • kube-router.io/path-prepend.repeat-n

If you wanted to prepend all routes from a particular node with the AS 65000 five times, you would run the following commands:

kubectl annotate node <kube-node> "kube-router.io/path-prepend.as=65000"
kubectl annotate node <kube-node> "kube-router.io/path-prepend.repeat-n=5"

BGP Peer Password Authentication

The examples above have assumed there is no password authentication with BGP peer routers. If you need to use a password for peering, you can use the --peer-router-passwords CLI flag or the kube-router.io/peer.passwords node annotation.

Base64 Encoding Passwords

To ensure passwords are easily parsed, but not easily read by human eyes, kube-router requires that they are encoded as base64.

On a Linux or MacOS system you can encode your passwords on the command line:

$ printf "SecurePassword" | base64
U2VjdXJlUGFzc3dvcmQ=

Password Configuration Examples

In this CLI flag example the first router (192.168.1.99) uses a password, while the second (192.168.1.100) does not.

--peer-router-ips="192.168.1.99,192.168.1.100"
--peer-router-asns="65000,65000"
--peer-router-passwords="U2VjdXJlUGFzc3dvcmQK,"

Note the comma indicating the end of the first password.

Now here's the same example but configured as node annotations:

kubectl annotate node <kube-node> "kube-router.io/peer.ips=192.168.1.99,192.168.1.100"
kubectl annotate node <kube-node> "kube-router.io/peer.asns=65000,65000"
kubectl annotate node <kube-node> "kube-router.io/peer.passwords=U2VjdXJlUGFzc3dvcmQK,"

BGP listen address list

By default GoBGP server binds on the node IP address. However in case of nodes with multiple IP address it is desirable to bind GoBGP to multiple local adresses. Local IP address on which GoGBP should listen on an node can be configured with annotation kube-router.io/bgp-local-addresses.

Here is sample example to make GoBGP server to listen on multiple IP address

kubectl annotate node ip-172-20-46-87.us-west-2.compute.internal "kube-router.io/bgp-local-addresses=172.20.56.25,192.168.1.99"

Overriding the next hop

By default kube-router populates GoBGP RIB with node IP as next hop for the advertised pod CIDR's and service VIP. While this works for most cases, overriding the next hop for the advertised rotues is necessary when node has multiple interfaces over which external peers are reached. Next hop need to be as per the interface local IP over which external peer can be reached. --override-nexthop let you override the next hop for the advertised route. Setting --override-nexthop to true leverages BGP next-hop-self functionality implemented in GoBGP. Next hop will automatically selected appropriately when advertising routes irrespective of the next hop in the RIB.