Home

HARDINFO

HardInfo is a system profiler and benchmark for Linux systems. It is able to obtain information from both hardware and basic software, and organize it in a simple to use GUI.

Features include:

• Report generation (in either HTML or plain text)
• Benchmark result synchronization
• Ability to explore the information on remote computers

Status

Capabilities: HardInfo currently detects most software and hardware detected by the OS. Features: Able to send report of detection to remote server so shared with us and others. Development: Currently done by contributors, a dedicated maintainer is welcome.

DEPENDENCIES

Required:

• Cmake 3.1 (or newer)
• GTK+ 2.20 (or newer)
• GLib 2.24 (or newer)
• GLib JSON (for benchmarks)
• Zlib (for zlib benchmark)

Optional (for synchronization/remote):

• Libsoup 2.42 (or newer)

INSTALLATION

Hardinfo must be build after usage, Create a build directory and build from there:

	hardinfo $ mkdir build
	hardinfo $ cd build
	build $ cmake ..
	build $ make

There are some variables that can be changed:

• CMAKE_BUILD_TYPE: Can either be Release or Debug.
  • [Default: Release] Debug prints messages to console and is not recommended for general use.
• CMAKE_INSTALL_PREFIX: Sets the installation prefix.
  • [Default: /usr/local]: Distributions usually change this to /usr.

To set a variable, use cmake's -D parameter. For example:

build $ cmake .. -DCMAKE_BUILD_TYPE=Debug

There are packages for Debian based distros, olders versions can be obtained from VeGNUli dekstop repository, newer ones are available at Debian official repositories

FEATURES AND USAGE

Hardinfo are a GUI tool, but can be invoked by hardinfo command.

Features include:

• Report generation (in either HTML or plain text)
• Benchmark result synchronization
• Ability to explore the information on remote computers

Just after install go to Menu->System and there is "System information and benchmarks" entry, click on them to see the main screen and test modules.

A manpage are available by typing and excecuting man hardinfo

Hardware detection tips:

Most hardware is detected automatically by HardInfo, however, some hardware needs manual set up. They are:

Sensors

lm-sensors: If your computer is compatible with lm-sensors module, use by example the sensors-detect program included with the lm-sensors package of Debian based distros, and be sure to have the detected kernel modules loaded.

hddtemp: To obtain the hard disk drive temperature, be sure to run hddtemp in daemon mode, using the default port.

Memory Speed

The module eeprom must be loaded to display info about your currently installed memory. Load with modprobe eeprom and refresh the module screen.