Referring to the Comportable guideline for peripheral device functionality, the module gpio has the following hardware interfaces defined
- Primary Clock:
clk_i - Other Clocks: none
- Bus Device Interfaces (TL-UL):
tl - Bus Host Interfaces (TL-UL): none
| Pin name | Direction | Description |
|---|---|---|
| gpio[31:0] | inout | GPIO inout to/from PAD |
| Port Name | Package::Struct | Type | Act | Width | Description |
|---|---|---|---|---|---|
| strap_en | logic | uni | rcv | 1 | This signal is pulsed high by the power manager after reset in order to sample the HW straps. |
| sampled_straps | gpio_pkg::gpio_straps | uni | req | 1 | This vector contains the sampled strap values. |
| tl | tlul_pkg::tl | req_rsp | rsp | 1 |
| Interrupt Name | Type | Description |
|---|---|---|
| gpio[31:0] | Event | raised if any of GPIO pin detects configured interrupt mode |
| Alert Name | Description |
|---|---|
| fatal_fault | This fatal alert is triggered when a fatal TL-UL bus integrity fault is detected. |
| Countermeasure ID | Description |
|---|---|
| GPIO.BUS.INTEGRITY | End-to-end bus integrity scheme. |