diff --git a/docs/components/enclosures/spelsberg_TG_PC_1208-6-o.md b/docs/components/enclosures/spelsberg_TG_PC_1208-6-o.md index 67e2dd73..8ca63ffc 100644 --- a/docs/components/enclosures/spelsberg_TG_PC_1208-6-o.md +++ b/docs/components/enclosures/spelsberg_TG_PC_1208-6-o.md @@ -8,7 +8,7 @@ title: Spelsberg TG PC 1208-6-o Spelsberg TG PC 1208-6-o Housing +style={{width: '35%', paddingTop: '10px', paddingBottom: '10px'}}/> * [Product Specifications (external Link)](https://www.spelsberg.com/industrial-housing/plain-with-mounting-cams/20040401/) * Size: 122mm (w) x 82mm (l) x 55mm (h) diff --git a/docs/configuration/img/lobaro-tool/Version-Identify-platform.png b/docs/configuration/img/lobaro-tool/Version-Identify-platform.png new file mode 100644 index 00000000..f53905ab Binary files /dev/null and b/docs/configuration/img/lobaro-tool/Version-Identify-platform.png differ diff --git a/docs/configuration/img/lobaro-tool/Version-Identify.png b/docs/configuration/img/lobaro-tool/Version-Identify.png new file mode 100644 index 00000000..542d0917 Binary files /dev/null and b/docs/configuration/img/lobaro-tool/Version-Identify.png differ diff --git a/docs/configuration/lobaro-config-tool.md b/docs/configuration/lobaro-config-tool.md index e4639b81..4fc78298 100644 --- a/docs/configuration/lobaro-config-tool.md +++ b/docs/configuration/lobaro-config-tool.md @@ -70,7 +70,7 @@ chmod +x lobaro-tool ./lobaro-tool ``` -## Connection Setup +## Connection setup Connect your Lobaro Device using the [Lobaro Config Adapter](./usb-config-adapter.md) to the USB-port of your computer. @@ -85,7 +85,7 @@ the device is connected to your computer (either COM or ttyUSB), you can alternatively select it explicitly instead of using auto. -## Device Configuration +## Device configuration Lobaro Configuration Tool - Automatic Connection + +Alternatively in the Lobaro IoT Platform: + +Lobaro Configuration Tool - Automatic Connection + + +### Getting the firmware update + +You will need the new firmware you want to install to your device as a file on your computer. You can get the latest firmware files from this documentation on the firmware subpage for your specific Lobaro product. The files are in a format called Hex and are therefore also called Hex-File. The filename always starts with app- and contains the version number as well as a short description of its function and the hardware it is used for. So, for example, -`app-nrf9160-wmbus-TZ2-0.3.1-mcuboot-slot0.hex` contains firmware for our wMBus-Gateway on NB-IoT-Hardware (nrf9160) in +`app-nrf9160-wmbus-TZ2-0.3.1-mcuboot-slot0.hex` contains the [app-nrf9160-wmbus](components/firmware/app-nrf9160-wmbus/introduction.md) firmware in version 0.3.1. +Usually you should only install updates of the same firmware that is currently installed on your Lobaro device. + ### Installing new firmware Lobaro Configuration Tool - Flash new firmware + +## Product Identification + +Label Wireless M-BUS Gateway V3 (Battery) + +* Product Name: **Wireless M-Bus Gateway V3 (Battery)** +* Product Type: **LOB-GW-HYB-WMBUS** +* Lobaro PN: `8000162` + +## Description + +Battery-powered gateway for regular remote reading of up to 650...800 wireless M-Bus (868 MHz) and Sensus RF consumption +meters (e.g. water meters, heat cost allocators) via NB-IoT, LTE-M mobile radio or LoRaWAN to the Internet. Suitable for +indoor and weather-protected outdoor installation. Ideal for intra-year consumption information (uVI) and billing in the +housing industry. + +### Product Components{#components} +This product is made from the following components, please see the individual common descriptions for +further details! + +:::info[Component Info] +* **Firmware**: + * Manual: [app-nrf9160-wmbus](/components/firmware/app-nrf9160-wmbus/introduction.md) + * Latest Firmware Update: [Download (hex file)](https://files.lobaro.com/s/9Zo3KQnXJDHNMgE) +* **Housing**: + * Type: [TG PC 1208-6-o](/components/enclosures/spelsberg_TG_PC_1208-6-o.md) +::: + See [Lobaro Tool description](/configuration/lobaro-config-tool#fwupdate) for information on how to update the firmware. + +## Datasheet & Quickstart + +| Document Type | PDF Download | +|:-------------------------|:-------------------------------------------------------------------------------------------------------------------------------------------------------------| +| Data sheet + Quickstart | [🇩🇪 Download](https://files.lobaro.com/index.php/s/SArz8mXdRTwyCHQ/download) ⎮ [🇬🇧 Download](https://files.lobaro.com/index.php/s/zS2J32EZX6mTxtQ/download) | +| 1-Page Printable version | [🇩🇪 Download](https://files.lobaro.com/index.php/s/r6M8kEsE2jwEQGx/download) ⎮ [🇬🇧 Download](https://files.lobaro.com/index.php/s/yFiXeAX7yoBH67s/download) | + +* Print settings: DIN A4 double sided, flip on short side +* Folding: You can fold it to a six page leaflet, using the marker next to "Initial operation". + +## Product specific details + +:::info +Information provided in this chapter is only valid for the above product unless otherwise noted. In case of doubt, +the information in this section takes precedence over the general [description of any component](#components). +::: + +### Internal view{#insideview} +Gateway V3 Internal Components + +1. Battery connector (XH) +2. SIM card socket (4FF - nano) +3. Reset button +4. Status LED (Blue, Green, Red) +5. Connector for [USB configuration adapter](/configuration/usb-config-adapter.md) +6. MicroSD card socket (unused by firmware) +7. Connector for internal PCB antenna +8. 3.6V D-Cell battery incl. loop tape +9. Pressure compensation element (PCE) + +### LED signal patterns + +The device has 3 three LEDs (B, G, R = Blue, Green, Red), labeled `Status` on the PCB: 🔵🟢🔴. + +See also item [item (4)](#insideview) of internal view. + +#### Patterns during booting/restart + +* 🔵⚪🔴 B and R on: Device is in Bootloader Mode (not actively running, remove config adapter press reset to leave + Bootloader Mode). +* ⚪🟢⚪ G on for ~2s and off again: Device just booted, either after power on, reset b button or software, or after a hard + failure. +* ⚪⚪🔴 R flashes repeatedly on and off in 1s interval: critical failure during boot (failed to start application). + +#### Patterns during normal operation + +* 🔵⚪⚪ B flashes 1s on and 1s off in loop: building LTE connection to mobile provider. Followed by: + * ⚪🟢⚪ Short G flash on success. + * ⚪⚪🔴 Short R flash after connection failed. +* There are no patterns during normal LoRaWAN operation. + +#### Exceptional patterns + +* 🔵⚪🔴/⚪🟢🔴 Quickly changing between R & B and G & B every 5s in a loop: Modem is in connection restriction mode - keep + device on power, will fix itself after 30min. + +### Battery Lifetime Calculator + +Please +see [online spreadsheet](https://docs.google.com/spreadsheets/d/1BjEO0UShdWuhaDqwDWPEtqszOBqUVfBH85dvtvdCjlA/edit?usp=sharing). + +## DoC + +* EU declaration of conformity (DoC): [🇬🇧 Download](https://files.lobaro.com/index.php/s/BKTJMPwmcg9Hs3n/download) + + + + + diff --git a/docs/products/metering-gateways/GW-V3/modifications/_category_.json b/docs/products/metering-gateways/GW-V3/modifications/_category_.json new file mode 100644 index 00000000..58e4e567 --- /dev/null +++ b/docs/products/metering-gateways/GW-V3/modifications/_category_.json @@ -0,0 +1,5 @@ +{ + "label": "Modifications", + "position": 0, + "collapsed": true +} diff --git a/docs/products/metering-gateways/GW-V3/modifications/variant1.md b/docs/products/metering-gateways/GW-V3/modifications/variant1.md new file mode 100644 index 00000000..0babd234 --- /dev/null +++ b/docs/products/metering-gateways/GW-V3/modifications/variant1.md @@ -0,0 +1,9 @@ +--- +sidebar_position: 1 +#displayed_sidebar: productsSidebar +title: Ext. antenna +--- + +# External antenna modification + +Do we want a dedicated page for variants of a product? Or make it a dedicated product page? \ No newline at end of file diff --git a/docs/products/metering-gateways/wireless-mbus-gateway-v3.md b/docs/products/metering-gateways/wireless-mbus-gateway-v3.md index a49f9cef..d1633c25 100644 --- a/docs/products/metering-gateways/wireless-mbus-gateway-v3.md +++ b/docs/products/metering-gateways/wireless-mbus-gateway-v3.md @@ -50,10 +50,6 @@ further details! * Print settings: DIN A4 double sided, flip on short side * Folding: You can fold it to a six page leaflet, using the marker next to "Initial operation". -## DoC - -* EU declaration of conformity (DoC): [🇬🇧 Download](https://files.lobaro.com/index.php/s/BKTJMPwmcg9Hs3n/download) - ## Product specific details :::info @@ -61,7 +57,7 @@ Information provided in this chapter is only valid for the above product unless the information in this section takes precedence over the general [description of any component](#components). ::: -### Device Components{#devicecomponents} +### Internal view{#insideview} Gateway V3 Internal Components @@ -80,7 +76,7 @@ style={{width: '40%', paddingTop: '10px', paddingBottom: '10px'}}/> The device has 3 three LEDs (B, G, R = Blue, Green, Red), labeled `Status` on the PCB: 🔵🟢🔴. -See also item [(4)](#devicecomponents) under device components listing. +See also item [item (4)](#insideview) of internal view. #### Patterns during booting/restart @@ -107,6 +103,10 @@ See also item [(4)](#devicecomponents) under device components listing. Please see [online spreadsheet](https://docs.google.com/spreadsheets/d/1BjEO0UShdWuhaDqwDWPEtqszOBqUVfBH85dvtvdCjlA/edit?usp=sharing). +## DoC + +* EU declaration of conformity (DoC): [🇬🇧 Download](https://files.lobaro.com/index.php/s/BKTJMPwmcg9Hs3n/download) + diff --git a/docusaurus.config.ts b/docusaurus.config.ts index 5043d31a..d76ad8c1 100644 --- a/docusaurus.config.ts +++ b/docusaurus.config.ts @@ -84,6 +84,17 @@ const config: Config = { width: '115px' }, items: [ + { + type: 'html', + position: 'left', + value: '', + }, + + { + type: 'html', + position: 'left', + value: '', + }, { to: 'products/', position: 'left', @@ -91,6 +102,7 @@ const config: Config = { }, + { to: 'components/', position: 'left', @@ -110,16 +122,8 @@ const config: Config = { label: 'IoT Platform', }, - { - type: 'html', - position: 'right', - value: '', - }, - { - type: 'html', - position: 'right', - value: '', - }, + + { to: 'knowledge-base/', position: 'right', @@ -134,15 +138,14 @@ const config: Config = { label: 'All Docs', },*/ /* {to: '/blog', label: 'Blog', position: 'left'},*/ - /* { + /* { href: 'https://github.com/lobaro/iot', label: 'GitHub', position: 'right', - }, - */ + },*/ { href: 'https://www.lobaro.de', - label: 'Lobaro Homepage', + label: 'Homepage', position: 'right', }, ],