platformio.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[platformio]
default_envs = ttgo-display

[common_env_data]
platform = espressif32@1.12.1
framework = arduino
board = esp32dev
monitor_speed = 115200

build_flags =
  -Os
  -DUSER_SETUP_LOADED=1
  -DST7789_DRIVER=1
  -DENABLE_TFT=1
  -DTFT_WIDTH=135
  -DTFT_HEIGHT=240
  -DCGRAM_OFFSET=1     ; Library will add offsets required
  -DTFT_MOSI=19
  -DTFT_SCLK=18
  -DTFT_CS=5
  -DTFT_DC=16
  -DTFT_RST=23
  -DTFT_BL=4           ; Display backlight control pin
  -DTFT_BACKLIGHT_ON=1 ; HIGH or LOW are options
  -DLOAD_GLCD=1
  -DLOAD_FONT2=1
  -DLOAD_FONT4=1
  -DLOAD_FONT6=1
  -DLOAD_FONT7=1
  -DLOAD_FONT8=1
  -DLOAD_GFXFF=1
  -DSMOOTH_FONT=1
  -DSPI_FREQUENCY=40000000     ; Maximum for ILI9341
  -DSPI_READ_FREQUENCY=6000000 ; 6 MHz is the maximum SPI read speed for the ST7789V
  -DCORE_DEBUG_LEVEL=3         ; Info level for development, please comment it for production

lib_deps =
  TFT_eSPI@2.2.3
  Button2@1.2.0
  https://github.com/hpsaturn/HPMA115S0.git@23cbd44
  Adafruit Unified Sensor@1.1.2
  Adafruit BME680 Library@1.0.7
  ArduinoJson@6.15.1
  https://github.com/hpsaturn/Influx-Arduino.git@ce16fc3

# Repartition esp32 for more space (wifi/bt) 
board_build.partitions = min_spiffs.csv

[env:ttgo-display]
platform = ${common_env_data.platform}
board = ${common_env_data.board}
framework = ${common_env_data.framework}
monitor_speed = ${common_env_data.monitor_speed}
lib_deps = ${common_env_data.lib_deps}
build_flags = ${common_env_data.build_flags}

# Repartition esp32 for more space (wifi/bt) 
board_build.partitions = min_spiffs.csv

[env:ttgo-display-ota]
platform = ${common_env_data.platform}
board = ${common_env_data.board}
framework = ${common_env_data.framework}
monitor_speed = ${common_env_data.monitor_speed}
lib_deps = ${common_env_data.lib_deps}
build_flags = ${common_env_data.build_flags}
upload_protocol = espota
upload_port = 'CanAirIO.local'    ; set IP if it fails
upload_flags =
    --port=3232
    --auth=CanAirIO   ; => set OTA password
# Repartition esp32 for more space (wifi/bt) 
board_build.partitions = min_spiffs.csv