Makefile

################################################################################
 # Copyright (C) 2020 Maxim Integrated Products, Inc., All Rights Reserved.
 #
 # Permission is hereby granted, free of charge, to any person obtaining a
 # copy of this software and associated documentation files (the "Software"),
 # to deal in the Software without restriction, including without limitation
 # the rights to use, copy, modify, merge, publish, distribute, sublicense,
 # and/or sell copies of the Software, and to permit persons to whom the
 # Software is furnished to do so, subject to the following conditions:
 #
 # The above copyright notice and this permission notice shall be included
 # in all copies or substantial portions of the Software.
 #
 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 # OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 # IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
 # OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 # ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 # OTHER DEALINGS IN THE SOFTWARE.
 #
 # Except as contained in this notice, the name of Maxim Integrated
 # Products, Inc. shall not be used except as stated in the Maxim Integrated
 # Products, Inc. Branding Policy.
 #
 # The mere transfer of this software does not imply any licenses
 # of trade secrets, proprietary technology, copyrights, patents,
 # trademarks, maskwork rights, or any other form of intellectual
 # property whatsoever. Maxim Integrated Products, Inc. retains all
 # ownership rights.
 #
 #
 ###############################################################################

# This is the name of the build output file
ifeq "$(PROJECT)" ""
PROJECT=max32665
endif

# Specify the target processor
ifeq "$(TARGET)" ""
TARGET=MAX32665
endif

# Create Target name variables
TARGET_UC:=$(shell echo $(TARGET) | tr a-z A-Z)
TARGET_LC:=$(shell echo $(TARGET) | tr A-Z a-z)

# Select 'GCC' or 'IAR' compiler
COMPILER=GCC

# Specify the board used
ifeq "$(BOARD)" ""
BOARD=FTHR
endif

# This is the path to the CMSIS root directory
#ifeq "$(MAXIM_PATH)" ""
#LIBS_DIR=../../../Libraries
#else
#LIBS_DIR=/$(subst \,/,$(subst :,,$(MAXIM_PATH))/Libraries)
#endif

LIBS_DIR= ./Libraries

CMSIS_ROOT=$(LIBS_DIR)/CMSIS
# SECURE_BOOT_TOOLS_DIR=$(LIBS_DIR)/../Tools/SBT
# CA_SIGN_BUILD=$(SECURE_BOOT_TOOLS_DIR)/bin/sign_app
# BUILD_SESSION=$(SECURE_BOOT_TOOLS_DIR)/bin/build_scp_session
# TEST_KEY=$(SECURE_BOOT_TOOLS_DIR)/devices/$(TARGET_UC)/keys/maximtestcrk.key
# SCP_PACKETS=scp_packets

#Use this for other library make files so they are all based off the same as root as the project
export CMSIS_ROOT

# Source files for this test (add path to VPATH below)
SRCS  = main.c
SRCS += freertos_tickless.c
SRCS += dats_main.c
SRCS += stack_dats.c
SRCS += wdxs_file.c
#SRCS += sla_header.c

# Where to find source files for this test
VPATH=.
VPATH += $(CMSIS_ROOT)/Device/Maxim/$(TARGET_UC)/Source

# Where to find header files for this test
IPATH = .

PROJ_CFLAGS =

# Enable assertion checking for development
PROJ_CFLAGS+=-DMXC_ASSERT_ENABLE

# Enable all warnings
PROJ_CFLAGS+=-Wall

# Specify the target revision to override default
# "A2" in ASCII
# TARGET_REV=0x4132

# Use this variables to specify and alternate tool path
#TOOL_DIR=/opt/gcc-arm-none-eabi-4_8-2013q4/bin


# Use these variables to add project specific tool options
#PROJ_CFLAGS+=--specs=nano.specs
#PROJ_LDFLAGS+=--specs=nano.specs

# Point this variable to a startup file to override the default file
#STARTUPFILE=start.S

# Set MXC_OPTIMIZE to override the default optimization level
# MXC_OPTIMIZE_CFLAGS=-O0

# Point this variable to a linker file to override the default file
LINKERFILE=ota.ld

################################################################################
# Cordio Library Options
DEBUG           := 1
TRACE           := 1
BT_VER          := 9
INIT_PERIPHERAL := 1
INIT_ENCRYPTED  := 1
RTOS            := freertos

# Enter standby mode when idle
STANDBY_ENABLED := 0

# Select either option, or both for combined Host and Controller on single core
BLE_HOST        := 1
BLE_CONTROLLER  := 1

################################################################################
# Include external library makefiles here

# Include the BSP
BOARD_DIR=$(LIBS_DIR)/Boards/$(TARGET_UC)/$(BOARD)
include $(BOARD_DIR)/board.mk

# Include the peripheral driver
PERIPH_DRIVER_DIR=$(LIBS_DIR)/PeriphDrivers
include $(PERIPH_DRIVER_DIR)/periphdriver.mk
export PERIPH_DRIVER_DIR

# Include the FreeRTOS library, and specify a local FreeRTOSConfig.h file
RTOS_CONFIG_DIR=.
RTOS_DIR=$(LIBS_DIR)/FreeRTOS
include $(RTOS_DIR)/freertos.mk

# Include the Cordio Library
CORDIO_DIR=$(LIBS_DIR)/Cordio
include $(CORDIO_DIR)/platform/targets/maxim/build/cordio.mk

################################################################################
# Include the rules for building for this target. All other makefiles should be
# included before this one.
include $(CMSIS_ROOT)/Device/Maxim/$(TARGET_UC)/Source/$(COMPILER)/$(TARGET_LC).mk

all:
# 	arm-none-eabi-objcopy $(BUILD_DIR)/$(PROJECT).elf -R .sig -O binary $(BUILD_DIR)/$(PROJECT).bin
# 	$(CA_SIGN_BUILD) $(BUILD_DIR)/$(PROJECT).bin $(TEST_KEY)
# 	arm-none-eabi-objcopy  $(BUILD_DIR)/$(PROJECT).elf --update-section .sig=$(BUILD_DIR)/$(PROJECT).bin.sig

libclean: 
	$(MAKE)  -f ${PERIPH_DRIVER_DIR}/periphdriver.mk clean.periph

# The rule to clean out all the build products.
distclean: clean libclean

sla: all
#	$(BUILD_SESSION) -c $(TARGET_UC) key_file=$(TEST_KEY) ${SCP_PACKETS} $(BUILD_DIR)/$(PROJECT).sbin