firebolt-certification-suite

Dependencies

Firebolt certification suite has the following dependencies.

Required

cypress-support (merged into FCS): The Cypress support module comprises a collection of Cypress commands and functions that were specifically created for the following purposes:

Facilitating communication with the Firebolt implementation on a device.
Facilitating communication with the Firebolt certification app during testing.
Conducting validation on the responses received from the Firebolt platform being tested.
Retrieving the configurations necessary for the aforementioned communication and validation processes.

modularTransportClient: The objective of this module is to consolidate multiple message transport systems under a unified interface, with minimal code modifications necessary when transitioning between different transport methods.

Optional

Configuration module: This module serves to supply configuration overrides for certification tests when they are run on a specific platform under test. For instance, to enable CI/CD executions for some platforms, it is necessary to convert Firebolt commands to be sent via pubsub communication, rather than establishing a direct WebSocket connection to the platform. In the absence of a configuration module, the default communication and configuration will be utilized (i.e., connecting directly to platform on a device via WebSocket).

Validation module: This module is designed to offer validation overrides or extensions for certification tests when they are executed on a firebolt platform under test. For example, additional distributor-level assertions on the Firebolt response obtained from the platform may be included.

Setup

To execute the certification suite against any platform, the following setup must be completed:

Configure optional dependencies
- Configuration module relevant to the platform under test. Refer to the Config Module Setup section for more information.
- Validation module relevant to the platform under test
Install the dependencies

yarn install

Note:
- If any dependency overrides exist in the remote config module, they will be applied during the post-install phase.
- The original versions of overridden dependencies will be stored in originalPkgVersion.json to avoid package.json and yarn.lock getting out of sync.
- To restore the package.json to its original state, run yarn restoreDependencyOverrides. This will restore the original package.json and delete originalPkgVersion.json.
Pull the configurations (if applicable)

yarn run setup
Provide the device configuration details. Update the cypress.config.js with the following details

Field	Type	Sample Value	Description
deviceIp	string	10.0.0.2	IP of the device under test (should be in the same network as the runner)
deviceMac	string	F0:AA:BB:EF:D1:C1	Mac address of the device under test
deviceCommPort	number	3474	Defaulted to 3474 in the config file
default3rdPartyAppId	string	firebolt_certification_app	The 3rd party app id to be used for ests. This app already be onboarded on to the platform being certified
{$default3rdPartyAppId}URL	string	firebolt_certification_appURL	The 3rd party app url to be used whenever the default 3rd Party App Id is used to launch in the certification suite test cases
mock	boolean	false	Whether to use mock firebolt for testing. Default value is false.
mockUser	string	456~A	The user id to be used while connecting to mock Firebolt
firstPartyAppId	string	firstPartyAppId	The app id to be used to make manage and discovery firebolt api calls. Default value is firstPartyAppId. This app id should have full permissions and configured as an allowed provider on the platform under test.
certification	boolean	true	Overriding excluded methods and modules from config module when certification is true
reportType	string	'mochawesome' or 'cucumber' or ''	If this value exists and is equal to one of the values, ONLY that report's event should be sent to report processor. In the case of empty value both reports should be sent to report processor
deleteReport	boolean	true	If the value is true, all the report files will be deleted in the provided report direcotory
apiObjectList	array	[]	It stores list of api ojects created after api call
event_param	object	{}	It stores the event params that has to be passed in the request
deviceIp	string	'localhost'	Hostname of the WebSocket server
wsUrlProtocol	string	'ws' or 'wss'	Protocol to use for the WebSocket connection
wsPort	number	9998	Port number for the WebSocket connection
wsUrlPath	string	'jsonrpc'	Path for the WebSocket connection
firebolt_specification_url	string	''	Path for the latest firebolt specification url
firebolt_specification_next_url	string	''	Path for the next firebolt specification url
firebolt_specification_proposed_url	string	''	Path for the proposed firebolt specification url
healthCheckRetries	number	8	Health check retry count
communicationMode	string	'SDK' or 'Transport'	Set communicationMode as SDK/transport. Default mode is SDK
performanceMetrics	boolean	true	Makes a call to platform to start/stop the recording of performance metrics if value is true

Provide the specPattern mapping details. Update the specHelperConfig.js with the specPattern mapping details.

Config Module Setup

By default, the project uses a predefined configuration module referred to as the defaultModule. To utilize a custom config module, you will need to update the project's dependency settings within the package.json file.

"dependencies": {
  "configModule": "git+ssh://<URL of Config Module>",
}

Once complete, continue following the rest of the Setup Instructions.

Execution

Following are the supported runtime environments -

module
- environment to support module feature runs
certification
- environment to support certification/sanity feature runs
sample
- environment to support sample feature runs
all
- environment to support all the feature runs

Run the certification suite with the browser

`npx cypress open --browser electron -- env testSuite =

Run the certification suite in cli

`npx cypress run -- env testSuite =

Run the certification suite in cli with overriding reporter-options

npm run cy:run -- --spec "" --env <key>=<value>

NOTE:

To override config based on the runtime environment, modify the cypress.config.js in root folder

Options

The above commands can be appended with other runtime arguments such as Other cypress command line can also be passed

Option	Description
--config, -c	Specify the configuration to be used
--env, -e	Specify additional run time environment variables or override configured environment variables
--spec, -s	Specify the spec files to run
--tag, -t	Specify the tags to be considered in the run

Helpful Information

setup is used to load all the fixture files from node-modules/configModule to cypress/fixtures/external/. This setup is done automatically in postInstall.

npm run setup

Before operation

Background -

Before operations are a set of operations which are performed before a test case is executed. This is achieved using the cypress beforeEach hook.
Before Operations are mainly used in below use cases:

Make a firebolt call to the platform/3rd party app - This would send firebolt calls to the platform/3rd party app before a test case is executed.
Used to set a mock response value for an api call - To override the default response for a firebolt call. Set pre-requisite values for UI operations like automating the UI actions.

Before operation also works based on tags provided in cli. This tags can be send as env values from cli command using the key beforeOperationTags. Based on the tags specified in cli and the beforeOperation, corresponding configModule would perform necessary action steps. We can send the tags in below format.
--env beforeOperationTags='tag'

Setup -

Since beforeOperations for each scenario varies according to the test case, we need to add beforeOperation support against each test case. To add the before operation support for any scenario , we need to add json objects in two places. Details given below -

In FCS cypress/fixtures/objects/moduleReqId/moduleReqId.json
Stucture to be followed :

"scenarioNames":{
   "<Feature file name>": {
      "<Name of the scenario how it is added in feature file>": {
         "req": [
            {
               "method": {
                  "id": "<Feature file name> 1.1",
                  "description": "<Brief of what that scenario does in a single line>"
               }
            }
         ]
      },
   }
}

In config module cypress/fixtures/objects/moduleReqId/moduleReqId.json
Stucture to be followed :

"scenarioNames":{
   "<Feature file name>": {
      "<Name of the scenario how it is added in feature file>": {
         "beforeOperation": [
            {
               "fireboltMock/fireboltCall": "<Key of params that to be send>",
               "firstParty": "<true/false>",
               "tags": ["if any tags are necessary for that before operation, else no need to add tags property"]
            }
         ]
      },
   }
}

Before Operation for each test case is an array of objects. This would enable us to make multiple before operations for each test case.
Properties in before Operation :
1) "fireboltMock/fireboltCall" : FireboltCall as a key will be used to make firebolt calls to the platform/3rd party app. FireboltMock as a key will be used to override the default response or set the responses.
Data of fireboltMock/fireboltCall keys should be added in config module fixtures/fireboltMocks/FeatureFileName.json or fixtures/fireboltCalls/FeatureFileName.json

2) "firstParty" : Set value as **true** if the call is to firstParty, set it as **false** if the value is to 3rd party. If no firstparty property is added, it will take **false** as default value.

3) "tags" : Based on the tags specified here and the cli , corresponding configModule would perform necessary action steps.

Usage -

Before operation is mainly used in automation to perform various actions before a test case is executed. Some of the basic use cases are given below -
1. To make firebolt calls to the 3rd party app or the platform.
2. Set pre-requisite values for UI operations like automating the UI actions.
3. Override the default response for a firebolt call.

Example -

Firebolt call to the platform:

{
  "fireboltCall": "USERGRANT_CLEAR_ACCOUNT_ID_ROLE_USE",
  "firstParty": true
}

Firebolt call to the 3rd party:

{
  "fireboltCall": "FEDERATED_DATA_ENTITYINFO",
  "firstParty": false
}

Firebolt call to the platform:

{
  "fireboltMock": "KEYBOARD_EMAIL_WITH_UI",
  "firstParty": true
}

HTTP call to the platform:

{
  "fireboltMock": "ACCOUNT_UID_ERROR",
  "firstParty": true
}

Request overrides

fetchPerformanceThreshold:

Request:
Makes an HTTP request to graphite with deviceMac, processType with how much percentile, and from what time to fetch the metrics.
Format:

 {
   method: 'performance.fetchPerformanceThreshold',
   params: {'type': '<(device|process|all)>', process: '<(memory|load|set size|required)>', percentile: 70, threshold: '<Threshold to use as source of truth>'}
 }

Examples:

 {
   method: 'performance.fetchPerformanceThreshold',
   params: {'type': 'device', process: 'memory', percentile: 70, threshold: '35000000'}
 }
 {
   method: 'performance.fetchPerformanceThreshold',
   params: {'type': 'process', process: 'set size', percentile: 70, threshold: '75000000'}
 }
 {
   method: 'performance.fetchPerformanceThreshold',
   params: {'type': 'all', process: 'required', percentile: 70, threshold: '75000000'}
 }

Response:
Receives an array of objects, which contains success and message properties, success defines the execution is a success or failure and message defines either response or any custom message that descibes the pass/fail. Example:

 [
    {
      "success": true,
      "message": "Expected received threshold for set sizeRSS is 37748736 to be less than the expected threshold of 1073741824"
    },
    {
      "success": true,
      "message": "Expected received threshold for set sizePSS is 41964544 to be less than the expected threshold of 1073741824"
    }
 ]

createMarker:

Request:
Making an HTTP call to grafana to create a marker on dashboard with given description.
Format:

 {
   method: 'performance.createMarker',
   params: <Scenario name>
 }

Examples:

 {
   method: 'performance.createMarker',
   params: 'Account.id - Positive Scenario: Validate account ID'
 }

Response:
Recieves an object with success and message properties. Example:

{
  "success": true,
  "message": "Marker has been created successfully"
}
{
  "success": false,
  "message": `Unable to create marker, failed with status code- 200 and error- unable to find the dashboard`
}

Data in fixture folder is segregated as per below configurations

Variables that is common across platforms and common across modules, add the test data in cypress/fixtures/defaultTestData.json in FCS.

eg:
"FALSE": false,
"TRUE": true,
"NULL": null,

Variables that is common across platforms but is used only in specific modules, add the test data in "/cypress/fixtures/modules/module.json" file in FCS. Module represents feature file.
Below data apply to Accessibility module, so data will go into cypress/fixtures/modules/Accessibility.json

eg 1:
"FONTFAMILY_SANS_SERIF": "sans-serif",
"FONTEDGE_UNIFORM": "uniform",

Below data apply to Device module, so data will go into cypress/fixtures/modules/Device.json

eg 2:
"NAME": "living room"

Variables that is specific to a platform add the test data in "fixtures/.json" file in configmodule. Module represents feature file.
Below data apply to Account module, so data will go into cypress/fixtures/modules/Account.json

eg:
"Id": "123456",
"Uid": "98654",

Manual Cache Deletion for Cypress

If you encounter any caching issues while executing testcases, please refer to this document Cache_Deletion.md

Using Winston Logger for Better Debugging

We have added Winston logger to FCS to make debugging easier. Instead of using console logs, use different types of loggers (info, debug, error) based on the nature of the message. Optionally, appending the module name to the logger message would furnish more precise information for debugging purposes. To know more about winston implementation refer logger.md

Example Usage:

logger.info('This is an informational message', 'moduleName');
logger.debug('This is a debugging message');
logger.error('This is an error message');

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

firebolt-certification-suite

Dependencies

Required

Optional

Setup

Config Module Setup

Execution

Run the certification suite with the browser

Run the certification suite in cli

Run the certification suite in cli with overriding reporter-options

NOTE:

Options

Helpful Information

Before operation

Background -

Setup -

Usage -

Example -

Request overrides

fetchPerformanceThreshold:

createMarker:

Data in fixture folder is segregated as per below configurations

Manual Cache Deletion for Cypress

Using Winston Logger for Better Debugging

Files

README.md

Latest commit

History

README.md

File metadata and controls

firebolt-certification-suite

Dependencies

Required

Optional

Setup

Config Module Setup

Execution

Run the certification suite with the browser

Run the certification suite in cli

Run the certification suite in cli with overriding reporter-options

NOTE:

Options

Helpful Information

Before operation

Background -

Setup -

Usage -

Example -

Request overrides

fetchPerformanceThreshold:

createMarker:

Data in fixture folder is segregated as per below configurations

Manual Cache Deletion for Cypress

Using Winston Logger for Better Debugging