Skip to content
This repository has been archived by the owner on Oct 31, 2020. It is now read-only.

Gosund SP111 v1.4 #124

Open
XRyu opened this issue Jul 24, 2020 · 0 comments
Open

Gosund SP111 v1.4 #124

XRyu opened this issue Jul 24, 2020 · 0 comments

Comments

@XRyu
Copy link

XRyu commented Jul 24, 2020

Hope this helps someone :) But i dont know how to get this in here:

Analog to: https://templates.blakadder.com/gosund_SP111_v1_4.html


substitutions:
  device_name: gosund-sp111-v14
  device_name_upper: "SmartPlug 01"
# Change these to your values
  current_res: "0.0012"
  voltage_div: "771"


#######################
#                 GOSUND SP111              
#######################

# WiFi connection
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
#  reboot_timeout: 0s
#  ssid: "abc"
#  password: "12345678"
  ap:
    ssid: "${device_name}"
#    password: "12345678"

# Enable Home Assistant API
api:
  password: !secret api_password
  reboot_timeout: 36h

# Enable OTA-Flashing
ota:
  password: !secret ota_password

# Enable Web server
web_server:
  port: 80

# Enable Captive Portal
captive_portal:

# Text sensors with general information
text_sensor:
  - platform: version
    name: ${device_name}_version

# Sync time with Home Assistant
time:
  - platform: homeassistant
    id: homeassistant_time

esphome:
  name: ${device_name}
  platform: ESP8266
  board: esp8285

sensor:
  - platform: hlw8012
    sel_pin:
      number: GPIO12
      inverted: True
    cf_pin: GPIO05
    cf1_pin: GPIO14
    current_resistor: ${current_res}
    voltage_divider: ${voltage_div}
    change_mode_every: 3
#    initial_mode: CURRENT
    update_interval: 5s
    current:
      name: "Current"
      unit_of_measurement: A
      accuracy_decimals: 3
    voltage:
      name: "Voltage"
      unit_of_measurement: V
      accuracy_decimals: 1
    power:
      name: "Wattage"
      unit_of_measurement: W
      accuracy_decimals: 0
   #   filters:
   #   - multiply: 0.5
      id: "Wattage"
  - platform: total_daily_energy
    name: "Total Daily Energy"
    power_id: "Wattage"
    filters:
        # Multiplication factor from W to kW is 0.001
        - multiply: 0.001
    unit_of_measurement: kWh

binary_sensor:
  # Binary sensor for the button press
  - platform: gpio
    name: button
    pin:
      number: GPIO13
      inverted: true
    on_press:
      - switch.toggle: relay

switch:
  # Switch to toggle the relay
  - platform: gpio
    id: relay
    name: relay
    pin: GPIO15
    on_turn_on:
      - light.turn_on: led
    on_turn_off:
      - light.turn_off: led

output:
  # Relay state led
  - platform: esp8266_pwm
    id: state_led
    pin:
      number: GPIO02
      inverted: true

light:
  # Relay state light
  - platform: monochromatic
    output: state_led
    id: led

# Uses the red LED as a ESPhome status indicator
status_led:
  pin:
    number: GPIO00
    inverted: true
Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant