Repeatedly shifted value by one decimal place

[real-skydiver]

Hi there,

I'm having a strange effect on my gas meter. About 5 ... 10x / day it reports a completely wrong value. Not just by one digit, but the whole value is either unrecognizable or shifted by one decimal place.
I spent a lot of time experimenting with the lighting. Two LED-bars arranged at an angle of ~45° (5x WS2811 each) to the glass of the meter seems to be the optimum. Unfortunately, the figures from the counter are extremely reflective. However, I think the lighting is not the cause of the problem.

[SybexX]

What are your settings and what does the log say?
Please set the log to "Debug" for more information and then post it here after the error occurs.

[real-skydiver]

Thanks for your time!! I've set it to 'Debug' and will post more next time this happens.

Could you give me a hint how to post the config? As image, as txt here? What is the preferred way?

[real-skydiver]

Here is a logfile with two successful converts and two errors:
DbgLog.txt

[real-skydiver]

And here is the config-file :)

Config.txt

[SybexX]

Can you please set "Extended Resolution" to "true", if my assumption is correct this should stop the error from occurring.

[SybexX]

You can also test the customized firmware if you want (with Extended Resolution=false).

AI-on-the-edge-device__update__v15.7.0.zip

[real-skydiver]

The "Extended Resolution" seems to have helped - no error since quite few hours!

Many thanks!!