Watermeter verbindet sich immer nur kurz mit dem WIFI-Netz #3414

GWsmart · 2024-11-30T16:43:00Z

GWsmart
Nov 30, 2024

Hallo!
ich habe meinen Watermeter nicht mehr bzw. immer nur kurz mit dem WLAN verbinden können. Momentan ist die neuste Firmware 16.0.0 drauf. Anbei der aktuelle LOG von der SD Karte. Vielleicht hat jemand eine Idee woran es liegen könnte.
Gruß Günter

[0d00h00m09s] 2024-11-30T17:13:48	<INF>	[SNTP] =================================================
[0d00h00m09s] 2024-11-30T17:13:48	<INF>	[SNTP] ==================== Start ======================
[0d00h00m09s] 2024-11-30T17:13:48	<INF>	[SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m09s] 2024-11-30T17:13:48	<INF>	[SNTP] Time is synced with NTP Server pool.ntp.org: 2024-11-30 17:13:48
[0d00h00m10s] 2024-11-30T17:13:48	<INF>	[MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m10s] 2024-11-30T17:13:48	<INF>	[MAIN] SD card info: Name: SD16G, Capacity: 14805MB, Free: 14780MB
[0d00h00m12s] 2024-11-30T17:13:51	<INF>	[MAIN] Initialization completed successfully
[0d00h00m14s] 2024-11-30T17:13:52	<INF>	[TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m00s] 2024-11-30T16:13:54	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-11-30T16:13:54	<INF>	[MAIN] ==================== Start ======================
[0d00h00m00s] 2024-11-30T16:13:54	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-11-30T16:13:54	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-11-30T16:13:54	<INF>	[MAIN] Total heap: 4382911 byte
[0d00h00m02s] 2024-11-30T16:13:57	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m02s] 2024-11-30T16:13:57	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m02s] 2024-11-30T16:13:57	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m02s] 2024-11-30T16:13:57	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m02s] 2024-11-30T16:13:57	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m02s] 2024-11-30T17:13:57	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m02s] 2024-11-30T17:13:57	<INF>	[SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m02s] 2024-11-30T17:13:57	<INF>	[SNTP] Time is already set: 2024-11-30 17:13:57
[0d00h00m02s] 2024-11-30T17:13:57	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2024-11-30T17:13:57	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m03s] 2024-11-30T17:13:57	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m03s] 2024-11-30T17:13:57	<INF>	[MAIN] Tag: '16.0.0-RC4', Release: 16.0.0-RC4 (Commit: 0a4560e+), Date/Time: 2024-10-06 22:22, Web UI: Release: 16.0.0-RC4 (Commit: 0a4560e+)
[0d00h00m03s] 2024-11-30T17:13:57	<WRN>	[MAIN] Reset reason: Exception/panic
[0d00h00m03s] 2024-11-30T17:13:57	<WRN>	[MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m03s] 2024-11-30T17:13:57	<WRN>	[MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m03s] 2024-11-30T17:13:57	<INF>	[LOGFILE] Set log level to DEBUG
[0d00h00m03s] 2024-11-30T17:13:57	<INF>	[WLANINI] SSID: FRITZ!Box 7430 W
[0d00h00m03s] 2024-11-30T17:13:57	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2024-11-30T17:13:57	<INF>	[WLANINI] RSSIThreshold: 0
[0d00h00m03s] 2024-11-30T17:13:57	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2024-11-30T17:13:57	<INF>	[WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2024-11-30T17:13:58	<INF>	[WIFI] Set hostname to: watermeter
[0d00h00m03s] 2024-11-30T17:13:58	<INF>	[WIFI] Init successful
[0d00h00m05s] 2024-11-30T17:14:00	<DBG>	[SNTP] Waiting for system time to be set... 1/10
[0d00h00m07s] 2024-11-30T17:14:02	<DBG>	[SNTP] Waiting for system time to be set... 2/10
[0d00h00m08s] 2024-11-30T17:14:02	<WRN>	[WIFI] Disconnected (203)
[0d00h00m09s] 2024-11-30T17:14:04	<DBG>	[SNTP] Waiting for system time to be set... 3/10
[0d00h00m10s] 2024-11-30T17:14:05	<WRN>	[WIFI] Disconnected (205)
[0d00h00m11s] 2024-11-30T17:14:06	<DBG>	[SNTP] Waiting for system time to be set... 4/10
[0d00h00m13s] 2024-11-30T17:14:07	<INF>	[WIFI] Connected to: FRITZ!Box 7430 W, RSSI: -74
[0d00h00m13s] 2024-11-30T17:14:08	<DBG>	[SNTP] Waiting for system time to be set... 5/10
[0d00h00m14s] 2024-11-30T17:14:08	<INF>	[WIFI] Assigned IP: 192.168.178.47
[0d00h00m15s] 2024-11-30T17:14:10	<DBG>	[SNTP] Waiting for system time to be set... 6/10
[0d00h00m17s] 2024-11-30T17:14:12	<DBG>	[SNTP] Waiting for system time to be set... 7/10
[0d00h00m19s] 2024-11-30T17:14:14	<DBG>	[SNTP] Waiting for system time to be set... 8/10
[0d00h00m21s] 2024-11-30T17:14:16	<DBG>	[SNTP] Waiting for system time to be set... 9/10
[0d00h00m23s] 2024-11-30T17:14:18	<DBG>	[MAIN] Manual Time Sync failed during startup
[0d00h00m23s] 2024-11-30T17:14:18	<INF>	[MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m23s] 2024-11-30T17:14:18	<INF>	[MAIN] SD card info: Name: SD16G, Capacity: 14805MB, Free: 14780MB
[0d00h00m25s] 2024-11-30T17:14:20	<INF>	[MAIN] Initialization completed successfully
[0d00h00m40s] 2024-11-30T17:14:34	<INF>	[SNTP] Time is synced with NTP Server pool.ntp.org: 2024-11-30 17:14:34
[0d00h05m02s] 2024-11-30T17:18:56	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m02s] 2024-11-30T17:18:56	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m02s] 2024-11-30T17:18:56	<DBG>	[OTA FILE] download_get_handler
[0d00h05m02s] 2024-11-30T17:18:56	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m02s] 2024-11-30T17:18:57	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:05	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:05	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m11s] 2024-11-30T17:19:06	<DBG>	[MAIN SERVER] info_get_handler
[0d00h05m25s] 2024-11-30T17:19:20	<DBG>	[PSRAM] Allocated 921600 bytes in PSRAM for 'C IMG BASIS->CImageBasis (rawImage)'
[0d00h05m27s] 2024-11-30T17:19:22	<DBG>	[PSRAM] Allocated 128004 bytes in PSRAM for 'ALIGN->AlgROI'
[0d00h05m27s] 2024-11-30T17:19:22	<DBG>	[PSRAM] Allocating Tensor Arena (819200 bytes, use shared memory in PSRAM)...
[0d00h05m27s] 2024-11-30T17:19:22	<DBG>	[TFLITE] CTfLiteClass::LoadModel
[0d00h05m27s] 2024-11-30T17:19:22	<DBG>	[TFLITE] CTfLiteClass::ReadFileToModel: /sdcard
[0d00h05m27s] 2024-11-30T17:19:22	<DBG>	[TFLITE] Loading Model /sdcard /size: 0 bytes...
[0d00h05m27s] 2024-11-30T17:19:22	<DBG>	[PSRAM] Allocating Model memory (1363148 bytes, use shared memory in PSRAM)...
[0d00h05m27s] 2024-11-30T17:19:22	<DBG>	[TFLITE] CTfLiteClass::MakeAllocate
[0d00h05m27s] 2024-11-30T17:19:22	<INF>	[TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m00s] 2024-11-30T16:19:19	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-11-30T16:19:19	<INF>	[MAIN] ==================== Start ======================
[0d00h00m00s] 2024-11-30T16:19:19	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-11-30T16:19:19	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-11-30T16:19:19	<INF>	[MAIN] Total heap: 4382911 byte
[0d00h00m02s] 2024-11-30T16:19:21	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m02s] 2024-11-30T16:19:21	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m02s] 2024-11-30T16:19:21	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m02s] 2024-11-30T16:19:21	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m02s] 2024-11-30T16:19:21	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m02s] 2024-11-30T17:19:21	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m02s] 2024-11-30T17:19:21	<INF>	[SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m02s] 2024-11-30T17:19:21	<INF>	[SNTP] Time is already set: 2024-11-30 17:19:21
[0d00h00m02s] 2024-11-30T17:19:21	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[MAIN] Tag: '16.0.0-RC4', Release: 16.0.0-RC4 (Commit: 0a4560e+), Date/Time: 2024-10-06 22:22, Web UI: Release: 16.0.0-RC4 (Commit: 0a4560e+)
[0d00h00m03s] 2024-11-30T17:19:22	<WRN>	[MAIN] Reset reason: Exception/panic
[0d00h00m03s] 2024-11-30T17:19:22	<WRN>	[MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m03s] 2024-11-30T17:19:22	<WRN>	[MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[LOGFILE] Set log level to DEBUG
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[WLANINI] SSID: FRITZ!Box 7430 W
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[WLANINI] RSSIThreshold: 0
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[WIFI] Set hostname to: watermeter
[0d00h00m03s] 2024-11-30T17:19:22	<INF>	[WIFI] Init successful
[0d00h00m05s] 2024-11-30T17:19:24	<DBG>	[SNTP] Waiting for system time to be set... 1/10
[0d00h00m07s] 2024-11-30T17:19:26	<DBG>	[SNTP] Waiting for system time to be set... 2/10
[0d00h00m08s] 2024-11-30T17:19:27	<INF>	[WIFI] Connected to: FRITZ!Box 7430 W, RSSI: -93
[0d00h00m09s] 2024-11-30T17:19:28	<DBG>	[SNTP] Waiting for system time to be set... 3/10
[0d00h00m11s] 2024-11-30T17:19:30	<DBG>	[SNTP] Waiting for system time to be set... 4/10
[0d00h00m13s] 2024-11-30T17:19:32	<DBG>	[SNTP] Waiting for system time to be set... 5/10
[0d00h00m15s] 2024-11-30T17:19:34	<DBG>	[SNTP] Waiting for system time to be set... 6/10
[0d00h00m17s] 2024-11-30T17:19:36	<DBG>	[SNTP] Waiting for system time to be set... 7/10
[0d00h00m19s] 2024-11-30T17:19:38	<DBG>	[SNTP] Waiting for system time to be set... 8/10
[0d00h00m21s] 2024-11-30T17:19:40	<DBG>	[SNTP] Waiting for system time to be set... 9/10
[0d00h00m23s] 2024-11-30T17:19:42	<DBG>	[MAIN] Manual Time Sync failed during startup
[0d00h00m23s] 2024-11-30T17:19:42	<INF>	[MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m23s] 2024-11-30T17:19:42	<INF>	[MAIN] SD card info: Name: SD16G, Capacity: 14805MB, Free: 14780MB
[0d00h00m25s] 2024-11-30T17:19:44	<INF>	[MAIN] Initialization completed successfully
[0d00h01m36s] 2024-11-30T17:20:55	<WRN>	[WIFI] Disconnected (200, Timeout)
[0d00h01m39s] 2024-11-30T17:20:58	<INF>	[WIFI] Connected to: FRITZ!Box 7430 W, RSSI: -73
[0d00h01m40s] 2024-11-30T17:20:59	<INF>	[WIFI] Assigned IP: 192.168.178.47
[0d00h02m37s] 2024-11-30T17:22:01	<INF>	[SNTP] Time is synced with NTP Server pool.ntp.org: 2024-11-30 17:22:01
[0d00h05m25s] 2024-11-30T17:24:49	<DBG>	[PSRAM] Allocated 921600 bytes in PSRAM for 'C IMG BASIS->CImageBasis (rawImage)'
[0d00h05m27s] 2024-11-30T17:24:51	<DBG>	[PSRAM] Allocated 128004 bytes in PSRAM for 'ALIGN->AlgROI'
[0d00h05m27s] 2024-11-30T17:24:51	<DBG>	[PSRAM] Allocating Tensor Arena (819200 bytes, use shared memory in PSRAM)...
[0d00h05m27s] 2024-11-30T17:24:51	<DBG>	[TFLITE] CTfLiteClass::LoadModel
[0d00h05m27s] 2024-11-30T17:24:51	<DBG>	[TFLITE] CTfLiteClass::ReadFileToModel: /sdcard
[0d00h05m27s] 2024-11-30T17:24:51	<DBG>	[TFLITE] Loading Model /sdcard /size: 0 bytes...
[0d00h05m27s] 2024-11-30T17:24:51	<DBG>	[PSRAM] Allocating Model memory (1363148 bytes, use shared memory in PSRAM)...
[0d00h05m27s] 2024-11-30T17:24:51	<DBG>	[TFLITE] CTfLiteClass::MakeAllocate
[0d00h05m27s] 2024-11-30T17:24:51	<INF>	[TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m00s] 2024-11-30T16:24:50	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-11-30T16:24:50	<INF>	[MAIN] ==================== Start ======================
[0d00h00m00s] 2024-11-30T16:24:50	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-11-30T16:24:50	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-11-30T16:24:50	<INF>	[MAIN] Total heap: 4382911 byte
[0d00h00m02s] 2024-11-30T16:24:52	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m02s] 2024-11-30T16:24:52	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m02s] 2024-11-30T16:24:52	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m02s] 2024-11-30T16:24:53	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m03s] 2024-11-30T16:24:53	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m03s] 2024-11-30T17:24:53	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m03s] 2024-11-30T17:24:53	<INF>	[SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m03s] 2024-11-30T17:24:53	<INF>	[SNTP] Time is already set: 2024-11-30 17:24:53
[0d00h00m03s] 2024-11-30T17:24:53	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2024-11-30T17:24:54	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m03s] 2024-11-30T17:24:54	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m03s] 2024-11-30T17:24:54	<INF>	[MAIN] Tag: '16.0.0-RC4', Release: 16.0.0-RC4 (Commit: 0a4560e+), Date/Time: 2024-10-06 22:22, Web UI: Release: 16.0.0-RC4 (Commit: 0a4560e+)
[0d00h00m03s] 2024-11-30T17:24:54	<WRN>	[MAIN] Reset reason: Exception/panic
[0d00h00m03s] 2024-11-30T17:24:54	<WRN>	[MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m03s] 2024-11-30T17:24:54	<WRN>	[MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m03s] 2024-11-30T17:24:54	<INF>	[LOGFILE] Set log level to DEBUG
[0d00h00m04s] 2024-11-30T17:24:54	<INF>	[WLANINI] SSID: FRITZ!Box 7430 W
[0d00h00m04s] 2024-11-30T17:24:54	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m04s] 2024-11-30T17:24:54	<INF>	[WLANINI] RSSIThreshold: 0
[0d00h00m04s] 2024-11-30T17:24:54	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m04s] 2024-11-30T17:24:54	<INF>	[WIFI] Automatic interface config --> Use DHCP service
[0d00h00m04s] 2024-11-30T17:24:54	<INF>	[WIFI] Set hostname to: watermeter
[0d00h00m04s] 2024-11-30T17:24:54	<INF>	[WIFI] Init successful
[0d00h00m06s] 2024-11-30T17:24:56	<DBG>	[SNTP] Waiting for system time to be set... 1/10
[0d00h00m08s] 2024-11-30T17:24:58	<DBG>	[SNTP] Waiting for system time to be set... 2/10
[0d00h00m09s] 2024-11-30T17:24:59	<WRN>	[WIFI] Disconnected (203)
[0d00h00m10s] 2024-11-30T17:25:00	<DBG>	[SNTP] Waiting for system time to be set... 3/10
[0d00h00m12s] 2024-11-30T17:25:02	<INF>	[WIFI] Connected to: FRITZ!Box 7430 W, RSSI: -94
[0d00h00m12s] 2024-11-30T17:25:02	<DBG>	[SNTP] Waiting for system time to be set... 4/10
[0d00h00m14s] 2024-11-30T17:25:04	<DBG>	[SNTP] Waiting for system time to be set... 5/10
[0d00h00m16s] 2024-11-30T17:25:06	<DBG>	[SNTP] Waiting for system time to be set... 6/10
[0d00h00m18s] 2024-11-30T17:25:08	<DBG>	[SNTP] Waiting for system time to be set... 7/10
[0d00h00m20s] 2024-11-30T17:25:10	<DBG>	[SNTP] Waiting for system time to be set... 8/10
[0d00h00m22s] 2024-11-30T17:25:12	<DBG>	[SNTP] Waiting for system time to be set... 9/10
[0d00h00m24s] 2024-11-30T17:25:14	<DBG>	[MAIN] Manual Time Sync failed during startup
[0d00h00m24s] 2024-11-30T17:25:14	<INF>	[MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m24s] 2024-11-30T17:25:14	<INF>	[MAIN] SD card info: Name: SD16G, Capacity: 14805MB, Free: 14780MB
[0d00h00m26s] 2024-11-30T17:25:16	<INF>	[MAIN] Initialization completed successfully
[0d00h05m07s] 2024-11-30T17:29:57	<WRN>	[WIFI] Disconnected (200, Timeout)
[0d00h05m10s] 2024-11-30T17:30:01	<WRN>	[WIFI] Disconnected (2, Auth fail)
[0d00h05m14s] 2024-11-30T17:30:04	<WRN>	[WIFI] Disconnected (2, Auth fail)
[0d00h05m16s] 2024-11-30T17:30:06	<WRN>	[WIFI] Disconnected (205)
[0d00h05m19s] 2024-11-30T17:30:09	<INF>	[WIFI] Connected to: FRITZ!Box 7430 W, RSSI: -76
[0d00h05m20s] 2024-11-30T17:30:10	<INF>	[WIFI] Assigned IP: 192.168.178.47
[0d00h05m26s] 2024-11-30T17:30:16	<DBG>	[PSRAM] Allocated 921600 bytes in PSRAM for 'C IMG BASIS->CImageBasis (rawImage)'
[0d00h05m28s] 2024-11-30T17:30:18	<DBG>	[PSRAM] Allocated 128004 bytes in PSRAM for 'ALIGN->AlgROI'
[0d00h05m28s] 2024-11-30T17:30:18	<DBG>	[PSRAM] Allocating Tensor Arena (819200 bytes, use shared memory in PSRAM)...
[0d00h05m28s] 2024-11-30T17:30:18	<DBG>	[TFLITE] CTfLiteClass::LoadModel
[0d00h05m28s] 2024-11-30T17:30:18	<DBG>	[TFLITE] CTfLiteClass::ReadFileToModel: /sdcard
[0d00h05m28s] 2024-11-30T17:30:18	<DBG>	[TFLITE] Loading Model /sdcard /size: 0 bytes...
[0d00h05m28s] 2024-11-30T17:30:18	<DBG>	[PSRAM] Allocating Model memory (1363148 bytes, use shared memory in PSRAM)...
[0d00h05m28s] 2024-11-30T17:30:18	<DBG>	[TFLITE] CTfLiteClass::MakeAllocate
[0d00h05m28s] 2024-11-30T17:30:18	<INF>	[TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m00s] 2024-11-30T16:30:15	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-11-30T16:30:15	<INF>	[MAIN] ==================== Start ======================
[0d00h00m00s] 2024-11-30T16:30:15	<INF>	[MAIN] =================================================
[0d00h00m00s] 2024-11-30T16:30:15	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-11-30T16:30:15	<INF>	[MAIN] Total heap: 4382911 byte
[0d00h00m02s] 2024-11-30T16:30:18	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m02s] 2024-11-30T16:30:18	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m02s] 2024-11-30T16:30:18	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m02s] 2024-11-30T16:30:18	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m02s] 2024-11-30T16:30:18	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m02s] 2024-11-30T17:30:18	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m02s] 2024-11-30T17:30:18	<INF>	[SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m02s] 2024-11-30T17:30:18	<INF>	[SNTP] Time is already set: 2024-11-30 17:30:18
[0d00h00m02s] 2024-11-30T17:30:18	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2024-11-30T17:30:18	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m03s] 2024-11-30T17:30:18	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m03s] 2024-11-30T17:30:18	<INF>	[MAIN] Tag: '16.0.0-RC4', Release: 16.0.0-RC4 (Commit: 0a4560e+), Date/Time: 2024-10-06 22:22, Web UI: Release: 16.0.0-RC4 (Commit: 0a4560e+)
[0d00h00m03s] 2024-11-30T17:30:18	<WRN>	[MAIN] Reset reason: Exception/panic
[0d00h00m03s] 2024-11-30T17:30:18	<WRN>	[MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m03s] 2024-11-30T17:30:18	<WRN>	[MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m03s] 2024-11-30T17:30:18	<INF>	[LOGFILE] Set log level to DEBUG
[0d00h00m03s] 2024-11-30T17:30:18	<INF>	[WLANINI] SSID: FRITZ!Box 7430 W
[0d00h00m03s] 2024-11-30T17:30:18	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2024-11-30T17:30:18	<INF>	[WLANINI] RSSIThreshold: 0
[0d00h00m03s] 2024-11-30T17:30:18	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2024-11-30T17:30:18	<INF>	[WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2024-11-30T17:30:19	<INF>	[WIFI] Set hostname to: watermeter
[0d00h00m03s] 2024-11-30T17:30:19	<INF>	[WIFI] Init successful
[0d00h00m05s] 2024-11-30T17:30:21	<DBG>	[SNTP] Waiting for system time to be set... 1/10
[0d00h00m07s] 2024-11-30T17:30:23	<DBG>	[SNTP] Waiting for system time to be set... 2/10
[0d00h00m08s] 2024-11-30T17:30:24	<INF>	[WIFI] Connected to: FRITZ!Box 7430 W, RSSI: -96
[0d00h00m09s] 2024-11-30T17:30:25	<DBG>	[SNTP] Waiting for system time to be set... 3/10
[0d00h00m11s] 2024-11-30T17:30:27	<DBG>	[SNTP] Waiting for system time to be set... 4/10
[0d00h00m13s] 2024-11-30T17:30:29	<DBG>	[SNTP] Waiting for system time to be set... 5/10
[0d00h00m15s] 2024-11-30T17:30:31	<DBG>	[SNTP] Waiting for system time to be set... 6/10
[0d00h00m17s] 2024-11-30T17:30:33	<DBG>	[SNTP] Waiting for system time to be set... 7/10
[0d00h00m19s] 2024-11-30T17:30:35	<DBG>	[SNTP] Waiting for system time to be set... 8/10
[0d00h00m21s] 2024-11-30T17:30:37	<DBG>	[SNTP] Waiting for system time to be set... 9/10
[0d00h00m23s] 2024-11-30T17:30:39	<DBG>	[MAIN] Manual Time Sync failed during startup
[0d00h00m23s] 2024-11-30T17:30:39	<INF>	[MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m23s] 2024-11-30T17:30:39	<INF>	[MAIN] SD card info: Name: SD16G, Capacity: 14805MB, Free: 14780MB
[0d00h00m25s] 2024-11-30T17:30:41	<INF>	[MAIN] Initialization completed successfully
[0d00h02m28s] 2024-11-30T17:32:44	<WRN>	[WIFI] Disconnected (200, Timeout)
[0d00h02m31s] 2024-11-30T17:32:46	<INF>	[WIFI] Connected to: FRITZ!Box 7430 W, RSSI: -77
[0d00h02m32s] 2024-11-30T17:32:47	<INF>	[WIFI] Assigned IP: 192.168.178.47
[0d00h02m40s] 2024-11-30T17:33:03	<INF>	[SNTP] Time is synced with NTP Server pool.ntp.org: 2024-11-30 17:33:03

log_2024-11-30.txt

Answered by GWsmart

Nov 30, 2024

Ich habe jetzt noch die Dateien SD-Karte aktualisiert. Seid dem ist der Watermeter stabil im WLAN.
Leider bekomme ich allerdings keine Verbindung über MQTT zum Home Assistant.
Das Board ist noch nicht über die Wasseruhr montiert, aber auch so sollte doch zumindest eine Verbindung aufgebaut werden, oder.
Muss ich in HA noch etwas einstellen um eine Verbindung aufzubauen? MQTT-Broker ist in HA als ADD-ON installiert.

View full answer

GWsmart · 2024-11-30T19:57:21Z

GWsmart
Nov 30, 2024
Author

Ich habe jetzt noch die Dateien SD-Karte aktualisiert. Seid dem ist der Watermeter stabil im WLAN.
Leider bekomme ich allerdings keine Verbindung über MQTT zum Home Assistant.
Das Board ist noch nicht über die Wasseruhr montiert, aber auch so sollte doch zumindest eine Verbindung aufgebaut werden, oder.
Muss ich in HA noch etwas einstellen um eine Verbindung aufzubauen? MQTT-Broker ist in HA als ADD-ON installiert.

4 replies

GWsmart Dec 1, 2024
Author

[0d00h00m00s] 2024-12-01T12:57:40	<INF>	[MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-12-01T12:57:40	<INF>	[MAIN] Total heap: 4382911 byte
[0d00h00m02s] 2024-12-01T12:57:42	<INF>	[MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m02s] 2024-12-01T12:57:42	<INF>	[SDCARD] Basic R/W check started...
[0d00h00m02s] 2024-12-01T12:57:42	<INF>	[SDCARD] Basic R/W check successful
[0d00h00m02s] 2024-12-01T12:57:43	<INF>	[SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m02s] 2024-12-01T12:57:43	<INF>	[SNTP] Configuring NTP Client...
[0d00h00m02s] 2024-12-01T13:57:43	<INF>	[SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m02s] 2024-12-01T13:57:43	<INF>	[SNTP] time zone: +0100 Delta to UTC: 3600 seconds
[0d00h00m02s] 2024-12-01T13:57:43	<INF>	[SNTP] Time is already set: 2024-12-01 13:57:43
[0d00h00m02s] 2024-12-01T13:57:43	<INF>	[MAIN] CPU frequency: 160 MHz
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[SDCARD] Folder/file presence check started...
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[SDCARD] Folder/file presence check successful
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[MAIN] Tag: '16.0.0-RC4', Release: 16.0.0-RC4 (Commit: 0a4560e+), Date/Time: 2024-10-06 22:22, Web UI: Release: 16.0.0-RC4 (Commit: 0a4560e+)
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[MAIN] Reset reason: Via esp_restart
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[WLANINI] SSID: FRITZ!Box 7430 W
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[WLANINI] RSSIThreshold: -75
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[WIFI] Set hostname to: watermeter
[0d00h00m03s] 2024-12-01T13:57:43	<INF>	[WIFI] Init successful
[0d00h00m06s] 2024-12-01T13:57:46	<INF>	[WIFI] Connected to: FRITZ!Box 7430 W, RSSI: -77
[0d00h00m07s] 2024-12-01T13:57:47	<INF>	[WIFI] Assigned IP: 192.168.178.47
[0d00h00m07s] 2024-12-01T13:57:47	<INF>	[SNTP] Time is synced with NTP Server pool.ntp.org: 2024-12-01 13:57:47
[0d00h00m07s] 2024-12-01T13:57:47	<INF>	[MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m07s] 2024-12-01T13:57:47	<INF>	[MAIN] SD card info: Name: SD16G, Capacity: 14805MB, Free: 14780MB
[0d00h00m09s] 2024-12-01T13:57:49	<INF>	[MAIN] Initialization completed successfully
[0d00h00m11s] 2024-12-01T13:57:52	<INF>	[TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m12s] 2024-12-01T13:57:52	<INF>	[TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m12s] 2024-12-01T13:57:52	<INF>	[LOGFILE] Set log level to ERROR

so sieht der aktuelle Log aus.
In HA unter MQTT-Explorer taucht folgende Meldung auf:

SybexX Dec 3, 2024
Collaborator

[0d00h00m03s] 2024-12-01T13:57:43 [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2024-12-01T13:57:46 [WIFI] Connected to: FRITZ!Box 7430 W, RSSI: -77
Dein Wlan-Empfang ist sehr schlecht und daher kommt es offenbar häufig zu Verbindungsabbrüchen/Neuverbindungen.
Entweder mußt du einen Repeater verwenden, eine externe Antenne am ESP oder du versuchst es erstmal mit "RSSIThreshold=0“.

GWsmart Dec 4, 2024
Author

@SybexX
Hallo danke für deinen Hinweis! Werde ich mich drum kümmern das der WLAN Empfang verbessert wird.
Ich weis nicht warum, aber seid heute kommt auch die Verbindung über MQTT zu HA zustande.
Jetzt muss ich nur noch sehen das ich an meiner Wasseruhr vernünftiges WLAN bekomme!

SybexX Dec 4, 2024
Collaborator

@GWsmart hast du RSSIThreshold=0 gesetzt, dann sollte dies der Grund dafür sein, weshalb MQTT zu HA jetzt funktioniert.

(Die RSSI-Werte sind meine eigene Erfahrungswerte!)
RSSI: -34 ist der Beste Empfang,
RSSI: -99 ist der schlechteste Empfang,
eine Verbindung mit einem RSSI schlechter als -68 ist in der Regel nicht wirklich brauchbar

RSSIThreshold=-75 >>> ist der Wlan-Empfang schlechter -75 >>> suche nach einem neuen Wlan und stelle eine Verbindung zu einem besseren her.
RSSIThreshold=0 >>> stelle eine Verbindung zum nächstbesten Wlan her und halte die Verbindung aufrecht, egal wie schlecht der Empfang ist.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Watermeter verbindet sich immer nur kurz mit dem WIFI-Netz #3414

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 1 comment 4 replies

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Select a reply

Watermeter verbindet sich immer nur kurz mit dem WIFI-Netz #3414

GWsmart Nov 30, 2024

Replies: 1 comment · 4 replies

GWsmart Nov 30, 2024 Author

GWsmart Dec 1, 2024 Author

SybexX Dec 3, 2024 Collaborator

GWsmart Dec 4, 2024 Author

SybexX Dec 4, 2024 Collaborator

GWsmart
Nov 30, 2024

Replies: 1 comment 4 replies

GWsmart
Nov 30, 2024
Author

GWsmart Dec 1, 2024
Author

SybexX Dec 3, 2024
Collaborator

GWsmart Dec 4, 2024
Author

SybexX Dec 4, 2024
Collaborator