Stuck in system setup

[ToFueK2023]

Hello I started to setup my system like discribed. But no chance.

Index page can not be reached. But sytem is running.

log file shows following info:

[0d00h00m00s] 2024-06-27T19:05:59 [MAIN] =================================================
[0d00h00m00s] 2024-06-27T19:05:59 [MAIN] ==================== Start ======================
[0d00h00m00s] 2024-06-27T19:05:59 [MAIN] =================================================
[0d00h00m00s] 2024-06-27T19:05:59 [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-06-27T19:05:59 [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2024-06-27T19:06:03 [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-06-27T19:06:03 [SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-06-27T19:06:03 [SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-06-27T19:06:03 [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-06-27T19:06:03 [SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-06-27T21:06:03 [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-06-27T21:06:03 [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m04s] 2024-06-27T21:06:03 [SNTP] Time is already set: 2024-06-27 21:06:03
[0d00h00m04s] 2024-06-27T21:06:03 [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2024-06-27T21:06:04 [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2024-06-27T21:06:04 [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2024-06-27T21:06:04 [MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2024-06-27T21:06:04 [MAIN] Reset reason: Exception/panic
[0d00h00m05s] 2024-06-27T21:06:04 [MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m05s] 2024-06-27T21:06:04 [MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m05s] 2024-06-27T21:06:04 [LOGFILE] Set log level to DEBUG
[0d00h00m05s] 2024-06-27T21:06:04 [WLANINI] SSID: ------
[0d00h00m05s] 2024-06-27T21:06:04 [WLANINI] Password: ------
[0d00h00m05s] 2024-06-27T21:06:04 [WLANINI] RSSIThreshold: 0
[0d00h00m05s] 2024-06-27T21:06:04 [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2024-06-27T21:06:04 [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m00s] 2024-06-27T19:10:22 [MAIN] =================================================
[0d00h00m00s] 2024-06-27T19:10:22 [MAIN] ==================== Start ======================
[0d00h00m00s] 2024-06-27T19:10:22 [MAIN] =================================================
[0d00h00m00s] 2024-06-27T19:10:22 [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-06-27T19:10:22 [MAIN] Total heap: 4380199 byte
[0d00h00m04s] 2024-06-27T19:10:26 [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2024-06-27T19:10:26 [SDCARD] Basic R/W check started...
[0d00h00m04s] 2024-06-27T19:10:26 [SDCARD] Basic R/W check successful
[0d00h00m04s] 2024-06-27T19:10:26 [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2024-06-27T19:10:26 [SNTP] Configuring NTP Client...
[0d00h00m04s] 2024-06-27T21:10:26 [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2024-06-27T21:10:26 [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m04s] 2024-06-27T21:10:26 [SNTP] Time is already set: 2024-06-27 21:10:26
[0d00h00m04s] 2024-06-27T21:10:26 [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2024-06-27T21:10:26 [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2024-06-27T21:10:26 [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2024-06-27T21:10:26 [MAIN] Tag: 'v15.7.0', Release: v15.7.0 (Commit: 0d0b018+), Date/Time: 2024-02-17 00:15, Web UI: Release: v15.7.0 (Commit: 0d0b018+)
[0d00h00m05s] 2024-06-27T21:10:26 [MAIN] Reset reason: Exception/panic
[0d00h00m05s] 2024-06-27T21:10:26 [MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m05s] 2024-06-27T21:10:26 [MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m05s] 2024-06-27T21:10:26 [LOGFILE] Set log level to DEBUG
[0d00h00m05s] 2024-06-27T21:10:26 [WLANINI] SSID: LAN_1250C
[0d00h00m05s] 2024-06-27T21:10:26 [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2024-06-27T21:10:26 [WLANINI] RSSIThreshold: 0
[0d00h00m05s] 2024-06-27T21:10:27 [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2024-06-27T21:10:27 [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2024-06-27T21:10:27 [WIFI] Set hostname to: watermeter
[0d00h00m05s] 2024-06-27T21:10:27 [WIFI] Init successful

What is wrong?

/stream is showing a picture

[SybexX]

It is possible that some file on the SD was damaged by the update or was not copied to it correctly.
Try copying the files manually to the SD on a PC. It's best to use AI-on-the-edge-device__manual-setup__v15.7.0.zip, all files are in there, including the config.ini.

[ToFueK2023]

I Tried it but same problem.

[SybexX]

this appears if the ESP32 cannot read the page/file or if it is not present on the SD.
are other pages displayed?

IP of your ESP/edit_config.html
IP of your ESP/edit_digits.html
IP of your ESP/edit_analog.html
IP of your ESP/edit_alignment.html
IP of your ESP/edit_reference.html

e.g. so: 192.168.178.33/edit_config.html

[ToFueK2023]

Finally I made it and it's running.
Thank you for the hint.