Repeating crashes #2763

PatrickGlatz · 2023-12-20T01:46:55Z

PatrickGlatz
Dec 20, 2023

The Problem

Um das InfluxDB Timestamp Problem zufixen habe ich das Rolling Update Development-Branch: HEAD (Commit: 977a419) eingespielt. Das hat auch soweit funktioniert, die Zeit wird richtig gepusht. Allerdings hat sich nach gut einer Stunde der ESP32 aufgehängt und war gar nicht mehr zu erreichen. Strom wegziehen hat geholfen und er hat wieder gebootet.

Nun war die Initialisierung jedoch delayed und ein Blick ins log zeigt, dass er gecrasht ist und deswegen die Initialisierung verzögert. Sobald er dann jedoch beginnt irgendetwas zu tun crasht er wieder und beginnt von neuem, siehe log unten.

Ich habe keine Ahnung, was daran nun verkehrt sein könnte und wäre um Hilfe dankbar! Ggf. würde ich morgen nochmal zurückspringen auf 15.3.0, sofern hier keine andere Empfehlung/Anweisung/Bitte kommt.

Viele Grüße und vielen Dank

Version

Development-Branch: HEAD (Commit: 977a419)

Logfile

[0d00h00m04s] 2023-12-20T00:00:29 <INF> [SNTP] Time is already set: 2023-12-20 00:00:29
[0d00h00m04s] 2023-12-20T00:00:29 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2023-12-20T00:00:29 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [MAIN] Tag: 'v15.3.0', Release: v15.3.0 (Commit: 3fbff0a), Date/Time: 2023-07-22 09:42, Web UI: Release: v15.3.0 (Commit: 3fbff0a)
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [WLANINI] SSID: Home_WiFi
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [WLANINI] Hostname: esp32cam_water
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [WIFI] Set hostname to: esp32cam_water
[0d00h00m05s] 2023-12-20T00:00:30 <INF> [WIFI] Init successful
[0d00h00m08s] 2023-12-20T00:00:33 <INF> [WIFI] Connected to: Home_WiFi, RSSI: -63
[0d00h00m09s] 2023-12-20T00:00:34 <INF> [WIFI] Assigned IP: 192.168.178.10
[0d00h00m25s] 2023-12-20T00:00:50 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m25s] 2023-12-20T00:00:50 <INF> [MAIN] SD card info: Name: SMI , Capacity: 3840MB, Free: 3801MB
[0d00h00m27s] 2023-12-20T00:00:52 <INF> [MAIN] Initialization completed successfully
[0d00h00m30s] 2023-12-20T00:00:54 <INF> [LOGFILE] Set log level to ERROR
[0d00h00m04s] 2023-12-20T00:01:14 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2023-12-20T00:01:14 <INF> [SNTP] Time is already set: 2023-12-20 00:01:14
[0d00h00m04s] 2023-12-20T00:01:14 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [MAIN] Tag: 'v15.3.0', Release: v15.3.0 (Commit: 3fbff0a), Date/Time: 2023-07-22 09:42, Web UI: Release: v15.3.0 (Commit: 3fbff0a)
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [WLANINI] SSID: Home_WiFi
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [WLANINI] Hostname: esp32cam_water
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2023-12-20T00:01:15 <INF> [WIFI] Set hostname to: esp32cam_water
[0d00h00m05s] 2023-12-20T00:01:16 <INF> [WIFI] Init successful
[0d00h00m09s] 2023-12-20T00:01:19 <INF> [WIFI] Connected to: Home_WiFi, RSSI: -62
[0d00h00m10s] 2023-12-20T00:01:20 <INF> [WIFI] Assigned IP: 192.168.178.10
[0d00h00m11s] 2023-12-20T00:01:21 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2023-12-20 00:01:21
[0d00h00m11s] 2023-12-20T00:01:22 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m11s] 2023-12-20T00:01:22 <INF> [MAIN] SD card info: Name: SMI , Capacity: 3840MB, Free: 3801MB
[0d00h00m13s] 2023-12-20T00:01:24 <INF> [MAIN] Initialization completed successfully
[0d00h00m16s] 2023-12-20T00:01:26 <INF> [LOGFILE] Set log level to ERROR
[0d00h01m33s] 2023-12-20T00:02:44 <ERR> [POSTPROC] main: Raw: 00375.036, Value: , Status: Rate too high - Read: 375.036 - Pre: 345.036 - Rate: 30.000
[0d00h00m04s] 2023-12-20T00:07:43 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2023-12-20T00:07:43 <INF> [SNTP] Time is already set: 2023-12-20 00:07:43
[0d00h00m04s] 2023-12-20T00:07:43 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [MAIN] Tag: 'v15.3.0', Release: v15.3.0 (Commit: 3fbff0a), Date/Time: 2023-07-22 09:42, Web UI: Release: v15.3.0 (Commit: 3fbff0a)
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [WLANINI] SSID: Home_WiFi
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [WLANINI] Hostname: esp32cam_water
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [WIFI] Set hostname to: esp32cam_water
[0d00h00m05s] 2023-12-20T00:07:44 <INF> [WIFI] Init successful
[0d00h00m09s] 2023-12-20T00:07:47 <INF> [WIFI] Connected to: Home_WiFi, RSSI: -64
[0d00h00m10s] 2023-12-20T00:07:48 <INF> [WIFI] Assigned IP: 192.168.178.10
[0d00h00m10s] 2023-12-20T00:07:49 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2023-12-20 00:07:49
[0d00h00m11s] 2023-12-20T00:07:50 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m11s] 2023-12-20T00:07:50 <INF> [MAIN] SD card info: Name: SMI , Capacity: 3840MB, Free: 3801MB
[0d00h00m13s] 2023-12-20T00:07:52 <INF> [MAIN] Initialization completed successfully
[0d00h00m16s] 2023-12-20T00:07:54 <INF> [LOGFILE] Set log level to ERROR
[0d00h06m34s] 2023-12-20T00:14:12 <ERR> [POSTPROC] main: Raw: 00375.035, Value: , Status: Rate too high - Read: 375.035 - Pre: 345.036 - Rate: 29.999
[0d00h11m33s] 2023-12-20T00:19:12 <ERR> [POSTPROC] main: Raw: 00375.036, Value: , Status: Rate too high - Read: 375.036 - Pre: 345.036 - Rate: 30.000
[0d00h16m33s] 2023-12-20T00:24:12 <ERR> [POSTPROC] main: Raw: 003N5.035, Value: , Status: Neg. Rate - Read: - Raw: 003N5.035 - Pre: 345.036
[0d00h00m04s] 2023-12-20T00:28:04 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2023-12-20T00:28:04 <INF> [SNTP] Time is already set: 2023-12-20 00:28:04
[0d00h00m04s] 2023-12-20T00:28:04 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2023-12-20T00:28:05 <INF> [OTA] Start update process (/sdcard/firmware/AI-on-the-edge-device__update__2679_merge_(977a419).zip)
[0d00h00m05s] 2023-12-20T00:28:05 <INF> [OTA] File: /sdcard/firmware/AI-on-the-edge-device__update__2679_merge_(977a419).zip Filetype: ZIP
[0d00h00m05s] 2023-12-20T00:28:05 <INF> [OTA FILE] Files to be extracted: 65
[0d00h01m12s] 2023-12-20T00:29:12 <INF> [OTA] Files unzipped.
[0d00h01m12s] 2023-12-20T00:29:12 <INF> [OTA] Found firmware.bin
[0d00h01m25s] 2023-12-20T00:29:25 <INF> [OTA] Trigger reboot due to firmware update
[0d00h01m25s] 2023-12-20T00:29:25 <WRN> [OTA] Reboot in 5sec
[0d00h00m04s] 2023-12-20T00:29:36 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2023-12-20T00:29:36 <INF> [SNTP] Time is already set: 2023-12-20 00:29:36
[0d00h00m04s] 2023-12-20T00:29:36 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [MAIN] Development-Branch: HEAD (Commit: 977a419), Date/Time: 2023-10-31 20:38, Web UI: Development-Branch: HEAD (Commit: 977a419)
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [WLANINI] SSID: Home_WiFi
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [WLANINI] Hostname: esp32cam_water
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [WIFI] Set hostname to: esp32cam_water
[0d00h00m05s] 2023-12-20T00:29:37 <INF> [WIFI] Init successful
[0d00h00m08s] 2023-12-20T00:29:40 <INF> [WIFI] Connected to: Home_WiFi, RSSI: -62
[0d00h00m09s] 2023-12-20T00:29:41 <INF> [WIFI] Assigned IP: 192.168.178.10
[0d00h00m25s] 2023-12-20T00:29:57 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m25s] 2023-12-20T00:29:57 <INF> [MAIN] SD card info: Name: SMI , Capacity: 3840MB, Free: 3802MB
[0d00h00m27s] 2023-12-20T00:29:59 <INF> [MAIN] Initialization completed successfully
[0d00h00m30s] 2023-12-20T00:30:02 <INF> [LOGFILE] Set log level to ERROR
[0d00h01m43s] 2023-12-20T00:31:15 <ERR> [POSTPROC] main: Raw: 00375.037, Value: , Status: Rate too high - Read: 375.037 - Pre: 345.036 - Rate: 30.001
[0d00h16m43s] 2023-12-20T00:46:15 <ERR> [POSTPROC] main: Raw: 00375.037, Value: , Status: Rate too high - Read: 375.037 - Pre: 345.037 - Rate: 30.000
[0d00h31m43s] 2023-12-20T01:01:14 <ERR> [POSTPROC] main: Raw: 00375.037, Value: , Status: Rate too high - Read: 375.037 - Pre: 345.037 - Rate: 30.000
[0d00h41m43s] 2023-12-20T01:11:14 <ERR> [POSTPROC] main: Raw: 00375.037, Value: , Status: Rate too high - Read: 375.037 - Pre: 345.037 - Rate: 30.000
[0d00h00m10s] 2023-12-20T02:23:58 <INF> [SNTP] =================================================
[0d00h00m10s] 2023-12-20T02:23:58 <INF> [SNTP] ==================== Start ======================
[0d00h00m10s] 2023-12-20T02:23:58 <INF> [SNTP] == Logs before time sync -> log_1970-01-01.txt ==
[0d00h00m10s] 2023-12-20T02:23:58 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2023-12-20 02:23:58
[0d00h00m11s] 2023-12-20T02:24:00 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m11s] 2023-12-20T02:24:00 <INF> [MAIN] SD card info: Name: SMI , Capacity: 3840MB, Free: 3814MB
[0d00h00m13s] 2023-12-20T02:24:02 <INF> [MAIN] Initialization completed successfully
[0d00h00m00s] 2023-12-20T01:24:06 <INF> [MAIN] =================================================
[0d00h00m00s] 2023-12-20T01:24:06 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2023-12-20T01:24:06 <INF> [MAIN] =================================================
[0d00h00m00s] 2023-12-20T01:24:06 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2023-12-20T01:24:06 <INF> [MAIN] Total heap: 4382091 byte
[0d00h00m04s] 2023-12-20T01:24:10 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2023-12-20T01:24:10 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2023-12-20T01:24:10 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2023-12-20T01:24:10 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2023-12-20T01:24:10 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2023-12-20T02:24:10 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2023-12-20T02:24:10 <INF> [SNTP] Time is already set: 2023-12-20 02:24:10
[0d00h00m04s] 2023-12-20T02:24:10 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2023-12-20T02:24:11 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2023-12-20T02:24:11 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2023-12-20T02:24:11 <INF> [MAIN] Development-Branch: HEAD (Commit: 977a419), Date/Time: 2023-10-31 20:38, Web UI: Development-Branch: HEAD (Commit: 977a419)
[0d00h00m05s] 2023-12-20T02:24:11 <WRN> [MAIN] Reset reason: Exception/panic
[0d00h00m05s] 2023-12-20T02:24:11 <WRN> [MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m05s] 2023-12-20T02:24:11 <WRN> [MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m05s] 2023-12-20T02:24:11 <INF> [LOGFILE] Set log level to DEBUG
[0d00h00m05s] 2023-12-20T02:24:11 <INF> [WLANINI] SSID: Home_WiFi
[0d00h00m05s] 2023-12-20T02:24:11 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2023-12-20T02:24:11 <INF> [WLANINI] Hostname: esp32cam_water
[0d00h00m05s] 2023-12-20T02:24:11 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m06s] 2023-12-20T02:24:12 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m06s] 2023-12-20T02:24:12 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m06s] 2023-12-20T02:24:12 <INF> [WIFI] Set hostname to: esp32cam_water
[0d00h00m06s] 2023-12-20T02:24:12 <INF> [WIFI] Init successful
[0d00h00m08s] 2023-12-20T02:24:14 <DBG> [SNTP] Waiting for system time to be set... 1/10
[0d00h00m09s] 2023-12-20T02:24:15 <INF> [WIFI] Connected to: Home_WiFi, RSSI: -65
[0d00h00m10s] 2023-12-20T02:24:16 <DBG> [SNTP] Waiting for system time to be set... 2/10
[0d00h00m10s] 2023-12-20T02:24:16 <INF> [WIFI] Assigned IP: 192.168.178.10
[0d00h00m12s] 2023-12-20T02:24:18 <DBG> [SNTP] Waiting for system time to be set... 3/10
[0d00h00m13s] 2023-12-20T02:24:19 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2023-12-20 02:24:19
[0d00h00m14s] 2023-12-20T02:24:20 <DBG> [SNTP] Waiting for system time successfull with 3/10
[0d00h00m14s] 2023-12-20T02:24:20 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m14s] 2023-12-20T02:24:20 <INF> [MAIN] SD card info: Name: SMI , Capacity: 3840MB, Free: 3814MB
[0d00h00m16s] 2023-12-20T02:24:22 <INF> [MAIN] Initialization completed successfully
[0d00h00m17s] 2023-12-20T02:24:23 <DBG> [MAIN SERVER] info_get_handler
[0d00h00m17s] 2023-12-20T02:24:23 <DBG> [MAIN SERVER] info_get_handler
[0d00h00m17s] 2023-12-20T02:24:23 <DBG> [MAIN SERVER] info_get_handler
[0d00h00m17s] 2023-12-20T02:24:23 <DBG> [OTA FILE] download_get_handler
[0d00h00m19s] 2023-12-20T02:24:25 <DBG> [OTA FILE] download_get_handler
[0d00h00m20s] 2023-12-20T02:24:26 <DBG> [MAIN SERVER] info_get_handler
[0d00h00m40s] 2023-12-20T02:24:46 <DBG> [OTA FILE] log_get_last_part_handler
[0d00h03m05s] 2023-12-20T02:27:11 <DBG> [OTA FILE] download_get_handler
[0d00h03m05s] 2023-12-20T02:27:11 <DBG> [MAIN SERVER] info_get_handler
[0d00h05m16s] 2023-12-20T02:29:22 <DBG> [PSRAM] Allocated 921600 bytes in PSRAM for 'C IMG BASIS->CImageBasis (rawImage)'
[0d00h05m18s] 2023-12-20T02:29:24 <DBG> [PSRAM] Allocated 128004 bytes in PSRAM for 'ALIGN->AlgROI'
[0d00h05m18s] 2023-12-20T02:29:24 <DBG> [PSRAM] Allocating Tensor Arena (819200 bytes, use shared memory in PSRAM)...
[0d00h05m18s] 2023-12-20T02:29:24 <DBG> [TFLITE] CTfLiteClass::LoadModel
[0d00h05m18s] 2023-12-20T02:29:24 <DBG> [TFLITE] CTfLiteClass::ReadFileToModel: /sdcard/config/dig-cont_0620_s3_q.tflite
[0d00h05m18s] 2023-12-20T02:29:24 <DBG> [TFLITE] Loading Model /sdcard/config/dig-cont_0620_s3_q.tflite /size: 315504 bytes...
[0d00h05m18s] 2023-12-20T02:29:24 <DBG> [PSRAM] Allocating Model memory (1363148 bytes, use shared memory in PSRAM)...
[0d00h05m18s] 2023-12-20T02:29:24 <DBG> [TFLITE] CTfLiteClass::MakeAllocate
[0d00h00m00s] 2023-12-20T01:29:24 <INF> [MAIN] =================================================
[0d00h00m00s] 2023-12-20T01:29:24 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2023-12-20T01:29:24 <INF> [MAIN] =================================================
[0d00h00m00s] 2023-12-20T01:29:24 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2023-12-20T01:29:24 <INF> [MAIN] Total heap: 4382091 byte
[0d00h00m04s] 2023-12-20T01:29:29 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2023-12-20T01:29:29 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2023-12-20T01:29:29 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2023-12-20T01:29:29 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2023-12-20T01:29:29 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2023-12-20T02:29:29 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2023-12-20T02:29:29 <INF> [SNTP] Time is already set: 2023-12-20 02:29:29
[0d00h00m04s] 2023-12-20T02:29:29 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2023-12-20T02:29:29 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2023-12-20T02:29:29 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2023-12-20T02:29:29 <INF> [MAIN] Development-Branch: HEAD (Commit: 977a419), Date/Time: 2023-10-31 20:38, Web UI: Development-Branch: HEAD (Commit: 977a419)
[0d00h00m05s] 2023-12-20T02:29:29 <WRN> [MAIN] Reset reason: Exception/panic
[0d00h00m05s] 2023-12-20T02:29:29 <WRN> [MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m05s] 2023-12-20T02:29:29 <WRN> [MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m05s] 2023-12-20T02:29:29 <INF> [LOGFILE] Set log level to DEBUG
[0d00h00m05s] 2023-12-20T02:29:29 <INF> [WLANINI] SSID: Home_WiFi
[0d00h00m05s] 2023-12-20T02:29:29 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2023-12-20T02:29:30 <INF> [WLANINI] Hostname: esp32cam_water
[0d00h00m05s] 2023-12-20T02:29:30 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2023-12-20T02:29:30 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2023-12-20T02:29:30 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2023-12-20T02:29:30 <INF> [WIFI] Set hostname to: esp32cam_water
[0d00h00m05s] 2023-12-20T02:29:30 <INF> [WIFI] Init successful
[0d00h00m07s] 2023-12-20T02:29:32 <DBG> [SNTP] Waiting for system time to be set... 1/10
[0d00h00m08s] 2023-12-20T02:29:33 <INF> [WIFI] Connected to: Home_WiFi, RSSI: -67
[0d00h00m09s] 2023-12-20T02:29:34 <DBG> [SNTP] Waiting for system time to be set... 2/10
[0d00h00m09s] 2023-12-20T02:29:34 <INF> [WIFI] Assigned IP: 192.168.178.10
[0d00h00m11s] 2023-12-20T02:29:38 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2023-12-20 02:29:38
[0d00h00m11s] 2023-12-20T02:29:38 <DBG> [SNTP] Waiting for system time successfull with 2/10
[0d00h00m11s] 2023-12-20T02:29:38 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m11s] 2023-12-20T02:29:38 <INF> [MAIN] SD card info: Name: SMI , Capacity: 3840MB, Free: 3814MB
[0d00h00m13s] 2023-12-20T02:29:40 <INF> [MAIN] Initialization completed successfully
[0d00h00m49s] 2023-12-20T02:30:16 <DBG> [OTA FILE] download_get_handler
[0d00h00m49s] 2023-12-20T02:30:16 <DBG> [MAIN SERVER] info_get_handler
[0d00h00m49s] 2023-12-20T02:30:16 <DBG> [OTA FILE] download_get_handler
[0d00h00m49s] 2023-12-20T02:30:16 <DBG> [MAIN SERVER] info_get_handler
[0d00h00m49s] 2023-12-20T02:30:16 <DBG> [MAIN SERVER] info_get_handler
[0d00h00m49s] 2023-12-20T02:30:16 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m11s] 2023-12-20T02:30:38 <DBG> [OTA FILE] log_get_last_part_handler
[0d00h02m29s] 2023-12-20T02:31:56 <DBG> [MAIN SERVER] info_get_handler
[0d00h02m29s] 2023-12-20T02:31:56 <DBG> [OTA FILE] download_get_handler
[0d00h02m29s] 2023-12-20T02:31:56 <DBG> [MAIN SERVER] info_get_handler
[0d00h02m29s] 2023-12-20T02:31:56 <DBG> [MAIN SERVER] info_get_handler
[0d00h02m29s] 2023-12-20T02:31:56 <DBG> [OTA FILE] log_get_last_part_handler
[0d00h02m42s] 2023-12-20T02:32:08 <DBG> [OTA FILE] download_get_handler
[0d00h02m42s] 2023-12-20T02:32:08 <DBG> [MAIN SERVER] info_get_handler
[0d00h03m51s] 2023-12-20T02:33:18 <DBG> [OTA FILE] log_get_last_part_handler
[0d00h04m52s] 2023-12-20T02:34:18 <DBG> [OTA FILE] download_get_handler
[0d00h04m52s] 2023-12-20T02:34:18 <DBG> [MAIN SERVER] info_get_handler
[0d00h04m52s] 2023-12-20T02:34:18 <DBG> [OTA FILE] download_get_handler
[0d00h04m52s] 2023-12-20T02:34:18 <DBG> [MAIN SERVER] info_get_handler
[0d00h04m52s] 2023-12-20T02:34:18 <DBG> [MAIN SERVER] info_get_handler
[0d00h04m52s] 2023-12-20T02:34:19 <DBG> [MAIN SERVER] info_get_handler
[0d00h05m13s] 2023-12-20T02:34:40 <DBG> [PSRAM] Allocated 921600 bytes in PSRAM for 'C IMG BASIS->CImageBasis (rawImage)'
[0d00h05m15s] 2023-12-20T02:34:42 <DBG> [PSRAM] Allocated 128004 bytes in PSRAM for 'ALIGN->AlgROI'
[0d00h05m15s] 2023-12-20T02:34:42 <DBG> [PSRAM] Allocating Tensor Arena (819200 bytes, use shared memory in PSRAM)...
[0d00h05m15s] 2023-12-20T02:34:42 <DBG> [TFLITE] CTfLiteClass::LoadModel
[0d00h05m15s] 2023-12-20T02:34:42 <DBG> [TFLITE] CTfLiteClass::ReadFileToModel: /sdcard/config/dig-cont_0620_s3_q.tflite
[0d00h05m15s] 2023-12-20T02:34:42 <DBG> [TFLITE] Loading Model /sdcard/config/dig-cont_0620_s3_q.tflite /size: 315504 bytes...
[0d00h05m15s] 2023-12-20T02:34:42 <DBG> [PSRAM] Allocating Model memory (1363148 bytes, use shared memory in PSRAM)...
[0d00h05m16s] 2023-12-20T02:34:42 <DBG> [TFLITE] CTfLiteClass::MakeAllocate
[0d00h00m00s] 2023-12-20T01:34:45 <INF> [MAIN] =================================================
[0d00h00m00s] 2023-12-20T01:34:45 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2023-12-20T01:34:45 <INF> [MAIN] =================================================
[0d00h00m00s] 2023-12-20T01:34:45 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2023-12-20T01:34:45 <INF> [MAIN] Total heap: 4382091 byte
[0d00h00m04s] 2023-12-20T01:34:49 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2023-12-20T01:34:49 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2023-12-20T01:34:49 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2023-12-20T01:34:49 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2023-12-20T01:34:49 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2023-12-20T02:34:49 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2023-12-20T02:34:49 <INF> [SNTP] Time is already set: 2023-12-20 02:34:49
[0d00h00m04s] 2023-12-20T02:34:49 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [MAIN] Development-Branch: HEAD (Commit: 977a419), Date/Time: 2023-10-31 20:38, Web UI: Development-Branch: HEAD (Commit: 977a419)
[0d00h00m05s] 2023-12-20T02:34:50 <WRN> [MAIN] Reset reason: Exception/panic
[0d00h00m05s] 2023-12-20T02:34:50 <WRN> [MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m05s] 2023-12-20T02:34:50 <WRN> [MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [LOGFILE] Set log level to DEBUG
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [WLANINI] SSID: Home_WiFi
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [WLANINI] Hostname: esp32cam_water
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [WIFI] Set hostname to: esp32cam_water
[0d00h00m05s] 2023-12-20T02:34:50 <INF> [WIFI] Init successful
[0d00h00m07s] 2023-12-20T02:34:52 <DBG> [SNTP] Waiting for system time to be set... 1/10
[0d00h00m08s] 2023-12-20T02:34:54 <INF> [WIFI] Connected to: Home_WiFi, RSSI: -64
[0d00h00m09s] 2023-12-20T02:34:54 <DBG> [SNTP] Waiting for system time to be set... 2/10
[0d00h00m09s] 2023-12-20T02:34:55 <INF> [WIFI] Assigned IP: 192.168.178.10
[0d00h00m11s] 2023-12-20T02:34:56 <DBG> [SNTP] Waiting for system time to be set... 3/10
[0d00h00m12s] 2023-12-20T02:34:56 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2023-12-20 02:34:56
[0d00h00m13s] 2023-12-20T02:34:58 <DBG> [SNTP] Waiting for system time successfull with 3/10
[0d00h00m13s] 2023-12-20T02:34:58 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m13s] 2023-12-20T02:34:58 <INF> [MAIN] SD card info: Name: SMI , Capacity: 3840MB, Free: 3814MB
[0d00h00m15s] 2023-12-20T02:35:00 <INF> [MAIN] Initialization completed successfully
[0d00h00m35s] 2023-12-20T02:35:20 <DBG> [OTA FILE] log_get_last_part_handler
[0d00h01m04s] 2023-12-20T02:35:49 <DBG> [OTA FILE] log_get_last_part_handler
[0d00h04m34s] 2023-12-20T02:39:19 <DBG> [MAIN SERVER] info_get_handler
[0d00h05m15s] 2023-12-20T02:40:00 <DBG> [PSRAM] Allocated 921600 bytes in PSRAM for 'C IMG BASIS->CImageBasis (rawImage)'
[0d00h05m17s] 2023-12-20T02:40:02 <DBG> [PSRAM] Allocated 128004 bytes in PSRAM for 'ALIGN->AlgROI'
[0d00h05m17s] 2023-12-20T02:40:02 <DBG> [PSRAM] Allocating Tensor Arena (819200 bytes, use shared memory in PSRAM)...
[0d00h05m17s] 2023-12-20T02:40:02 <DBG> [TFLITE] CTfLiteClass::LoadModel
[0d00h05m17s] 2023-12-20T02:40:02 <DBG> [TFLITE] CTfLiteClass::ReadFileToModel: /sdcard/config/dig-cont_0620_s3_q.tflite
[0d00h05m17s] 2023-12-20T02:40:02 <DBG> [TFLITE] Loading Model /sdcard/config/dig-cont_0620_s3_q.tflite /size: 315504 bytes...
[0d00h05m17s] 2023-12-20T02:40:02 <DBG> [PSRAM] Allocating Model memory (1363148 bytes, use shared memory in PSRAM)...
[0d00h05m18s] 2023-12-20T02:40:02 <DBG> [TFLITE] CTfLiteClass::MakeAllocate
[0d00h00m00s] 2023-12-20T01:40:04 <INF> [MAIN] =================================================
[0d00h00m00s] 2023-12-20T01:40:04 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2023-12-20T01:40:04 <INF> [MAIN] =================================================
[0d00h00m00s] 2023-12-20T01:40:04 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2023-12-20T01:40:04 <INF> [MAIN] Total heap: 4382091 byte
[0d00h00m04s] 2023-12-20T01:40:08 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m04s] 2023-12-20T01:40:08 <INF> [SDCARD] Basic R/W check started...
[0d00h00m04s] 2023-12-20T01:40:08 <INF> [SDCARD] Basic R/W check successful
[0d00h00m04s] 2023-12-20T01:40:08 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m04s] 2023-12-20T01:40:08 <INF> [SNTP] Configuring NTP Client...
[0d00h00m04s] 2023-12-20T02:40:08 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m04s] 2023-12-20T02:40:08 <INF> [SNTP] Time is already set: 2023-12-20 02:40:08
[0d00h00m04s] 2023-12-20T02:40:08 <INF> [MAIN] CPU frequency: 160 MHz
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [MAIN] Development-Branch: HEAD (Commit: 977a419), Date/Time: 2023-10-31 20:38, Web UI: Development-Branch: HEAD (Commit: 977a419)
[0d00h00m05s] 2023-12-20T02:40:09 <WRN> [MAIN] Reset reason: Exception/panic
[0d00h00m05s] 2023-12-20T02:40:09 <WRN> [MAIN] Device was rebooted due to a software exception! Log level is set to DEBUG until the next reboot. Flow init is delayed by 5 minutes to check the logs or do an OTA update
[0d00h00m05s] 2023-12-20T02:40:09 <WRN> [MAIN] Keep device running until crash occurs again and check logs after device is up again
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [LOGFILE] Set log level to DEBUG
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [WLANINI] SSID: Home_WiFi
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [WLANINI] Hostname: esp32cam_water
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [WIFI] Set hostname to: esp32cam_water
[0d00h00m05s] 2023-12-20T02:40:09 <INF> [WIFI] Init successful
[0d00h00m07s] 2023-12-20T02:40:11 <DBG> [SNTP] Waiting for system time to be set... 1/10
[0d00h00m08s] 2023-12-20T02:40:13 <INF> [WIFI] Connected to: Home_WiFi, RSSI: -64
[0d00h00m09s] 2023-12-20T02:40:13 <DBG> [SNTP] Waiting for system time to be set... 2/10
[0d00h00m09s] 2023-12-20T02:40:14 <INF> [WIFI] Assigned IP: 192.168.178.10
[0d00h00m11s] 2023-12-20T02:40:15 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2023-12-20 02:40:15
[0d00h00m11s] 2023-12-20T02:40:16 <DBG> [SNTP] Waiting for system time successfull with 2/10
[0d00h00m11s] 2023-12-20T02:40:16 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 100
[0d00h00m11s] 2023-12-20T02:40:16 <INF> [MAIN] SD card info: Name: SMI , Capacity: 3840MB, Free: 3814MB
[0d00h00m13s] 2023-12-20T02:40:18 <INF> [MAIN] Initialization completed successfully
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m18s] 2023-12-20T02:41:22 <DBG> [MAIN SERVER] info_get_handler
[0d00h01m39s] 2023-12-20T02:41:43 <DBG> [OTA FILE] log_get_last_part_handler

Expected Behavior

Über Tage durchlaufend stabil

Screenshots

No response

Additional Context

No response

Slider0007 · 2023-12-20T06:59:38Z

Slider0007
Dec 20, 2023
Collaborator

It's crashing during tflite model allocation. Try using another tflite model, maybe the file of the model in use is corrupt.

0 replies

PatrickGlatz · 2023-12-20T07:24:43Z

PatrickGlatz
Dec 20, 2023
Author

Good morning @Slider0007 ,

thanks for the hint. I have downgraded to 15.3.0 by using OTA without any other changes and it is directly working again (besides the faulty timestamp in influx). In case i find some more time, i'll update to the rolling release again and recheck.

Should i leave this here open because there might be a bug or is it just the user installation, which somewhen broke and we can close this issue?

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repeating crashes #2763

{{title}}

Replies: 2 comments

{{title}}

{{title}}

Select a reply

Repeating crashes #2763

PatrickGlatz Dec 20, 2023

The Problem

Version

Logfile

Expected Behavior

Screenshots

Additional Context

Replies: 2 comments

Slider0007 Dec 20, 2023 Collaborator

PatrickGlatz Dec 20, 2023 Author

PatrickGlatz
Dec 20, 2023

Slider0007
Dec 20, 2023
Collaborator

PatrickGlatz
Dec 20, 2023
Author