Reset reason: Exception/panic (Warum?) #1970

TopGoalVl · 2023-02-03T15:26:55Z

TopGoalVl
Feb 3, 2023

In den log files ist für mich nicht erkennbar, warum das System einen Restart macht.
Das ist bisher der zweite Neustart wegen Exeption/panic. Kennt jemand den Grund?

Das System läuft nach dem Neustart ohne Probleme weiter ;)
Den Fall wollte ich aber dokumentieren.

Auffällig ist, dass der Wert -0.000125 im Data log nicht stimmt.
Der sollte ca. 0.001264 betragen. Auf keinen Fall negativ sein. Hängt
möglicherweise mit dem negativen Wert von "uptime" zusammen (s.u.).

Die berechneten Wasserverbräuche (absolute Rate) sind allerdings korrekt.

Data log Auszug:

`
2023-02-03T13:51:12+0100,main,0421.59646,421.59646,421.59646,0.000188,0.00091,no error,0.0,4.0,2.0,0.9,6.1,9.5,6.5,4.6
2023-02-03T13:56:04+0100,main,0421.60130,421.60130,421.60130,0.000995,0.00484,no error,0.0,4.0,2.0,0.9,6.2,9.9,1.2,3.0
2023-02-03T14:06:49+0100,main,0421.60744,421.60744,421.60744,-0.000125,0.00614,no error,0.0,4.0,2.0,0.9,6.2,0.5,7.5,4.4
2023-02-03T14:11:30+0100,main,0421.60941,421.60941,421.60941,0.000421,0.00197,no error,0.0,4.0,2.0,0.9,6.2,0.8,9.5,4.1
(Zeile eins und zwei vor dem Restart, Zeile drei und vier danach).

Uptime, content: -2272 (msg_id=6) startet nach dem Restart mit einem negativen Wert.

`
Message log

(zum Restart und Round #1)

`
[0d16h54m58s] 2023-02-03T13:56:34 [POSTPROC] main: Raw: 0421.60130, Value: 421.60130, Status: no error
[0d16h54m58s] 2023-02-03T13:56:34 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Sending MQTT (msg_id=4092)
[0d16h54m59s] 2023-02-03T13:56:34 [MQTT SERVER] Publishing system MQTT topics...
[0d16h54m59s] 2023-02-03T13:56:34 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/uptime, content: 63871 (msg_id=4093)
[0d16h54m59s] 2023-02-03T13:56:34 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/freeMem, content: 3013239 (msg_id=4094)
[0d16h54m59s] 2023-02-03T13:56:34 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/wifiRSSI, content: -47 (msg_id=4095)
[0d16h54m59s] 2023-02-03T13:56:34 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/CPUtemp, content: 53 (msg_id=4096)
[0d16h54m59s] 2023-02-03T13:56:34 [MQTT] Publishing MQTT topics...
[0d16h54m59s] 2023-02-03T13:56:34 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/value, content: 421.60130 (msg_id=4097)
[0d16h54m59s] 2023-02-03T13:56:34 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/error, content: no error (msg_id=4098)
[0d16h54m59s] 2023-02-03T13:56:34 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/rate, content: 0.000995 (msg_id=4099)
[0d16h54m59s] 2023-02-03T13:56:35 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/rate_per_time_unit, content: 0.000995 (msg_id=4100)
[0d16h54m59s] 2023-02-03T13:56:35 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/changeabsolut, content: 0.00484 (msg_id=4101)
[0d16h54m59s] 2023-02-03T13:56:35 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/rate_per_digitalization_round, content: 0.00484 (msg_id=4102)
[0d16h54m59s] 2023-02-03T13:56:35 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/raw, content: 0421.60130 (msg_id=4103)
[0d16h54m59s] 2023-02-03T13:56:35 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/timestamp, content: 2023-02-03T13:56:04+0100 (msg_id=4104)
[0d16h54m59s] 2023-02-03T13:56:35 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/json, content: { "value": "421.60130", "raw": "0421.60130", "pre": "421.60130", .. (msg_id=4105)
[0d16h55m00s] 2023-02-03T13:56:35 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Flow finished (msg_id=4106)
[0d16h55m00s] 2023-02-03T13:56:35 [TFLITE SERVER] CPU Temperature: 53.3
[0d16h55m00s] 2023-02-03T13:56:35 [TFLITE SERVER] Round #210 completed
[0d16h59m16s] 2023-02-03T14:00:51 [TFLITE SERVER] ----------------------------------------------------------------
[0d16h59m16s] 2023-02-03T14:00:52 [TFLITE SERVER] Round #211 started
[0d16h59m16s] 2023-02-03T14:00:52 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Take Image (msg_id=4107)
[0d16h59m22s] 2023-02-03T14:00:57 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Aligning (msg_id=4108)
[0d16h59m32s] 2023-02-03T14:01:07 [MAIN SERVER] info_get_handler
[0d00h00m04s] 2023-02-03T13:44:30 [MAIN] =================================================
[0d00h00m04s] 2023-02-03T13:44:30 [MAIN] ==================== Startup ====================
[0d00h00m04s] 2023-02-03T13:44:30 [MAIN] =================================================
[0d00h00m04s] 2023-02-03T13:44:30 [MAIN] Branch: 'HEAD', Revision: 04f2f23+, Date/Time: 2022-12-19 20:41, Web UI: Release: v13.0.8 (Commit: 04f2f23+)
[0d00h00m04s] 2023-02-03T13:44:30 [MAIN] Reset reason: Exception/panic
[0d00h00m12s] 2023-02-03T13:44:38 [MAIN] =================================================
[0d00h00m12s] 2023-02-03T13:44:38 [MAIN] ================== Main Started =================
[0d00h00m12s] 2023-02-03T13:44:38 [MAIN] =================================================
[0d00h00m12s] 2023-02-03T13:44:38 [MAIN] The device has 8 MBytes of PSRAM
[0d00h00m14s] 2023-02-03T13:44:40 [MAIN] Initialization completed successfully!
[0d00h00m14s] 2023-02-03T13:44:40 [TFLITE SERVER] Restarted due to an Exception/panic! Postponing first round start by 5 minutes to allow for an OTA or to fetch the log!
[0d00h00m14s] 2023-02-03T13:44:40 [TFLITE SERVER] Setting logfile level to DEBUG until the next reboot!
[0d00h04m55s] 2023-02-03T13:49:21 [MAIN SERVER] info_get_handler
[0d00h05m21s] 2023-02-03T13:49:47 [TFLITE] Make Allocate
[0d00h05m22s] 2023-02-03T13:49:48 [TFLITE] Make Allocate
[0d00h05m22s] 2023-02-03T14:49:48 [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h05m22s] 2023-02-03T14:49:48 [SNTP] Set SNTP-Server to de.pool.ntp.org
[0d00h05m22s] 2023-02-03T14:49:48 [SNTP] Waiting until we get a time from the NTP server de.pool.ntp.org
[0d00h05m22s] 2023-02-03T14:49:48 [SNTP] Status: Reset
[0d00h05m24s] 2023-02-03T14:06:35 [SNTP] Status OK
[0d00h05m24s] 2023-02-03T14:06:35 [SNTP] Time is synced with NTP Server de.pool.ntp.org
[0d00h05m24s] 2023-02-03T14:06:35 [MQTT] Digitizer interval is 4.8 minutes => setting MQTT LWT timeout to 12.1 minutes.
[0d00h05m24s] 2023-02-03T14:06:35 [MQTT IF] URI: mqtt://192.168.188.19:1883, clientname: LeuVoShWz6, user: xxxxxxxx, password: XXXXXXXX, maintopic: LeupoldsPub/Wasserzähler, last-will-topic: LeupoldsPub/Wasserzähler/connection, keepAlive: 727, RetainFlag: 1
[0d00h05m24s] 2023-02-03T14:06:35 [MQTT IF] Init
[0d00h05m24s] 2023-02-03T14:06:35 [MQTT IF] Client started, waiting for established connection...
[0d00h05m25s] 2023-02-03T14:06:36 [TFLITE SERVER] ----------------------------------------------------------------
[0d00h05m25s] 2023-02-03T14:06:36 [TFLITE SERVER] Round #1 started
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT SERVER] Publishing static MQTT topics...
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/MAC, content: C8:F0:9E:A2:63:50 (msg_id=2)
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/IP, content: 192.168.188.6 (msg_id=3)
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/hostname, content: LeuVoShWz6 (msg_id=4)
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/interval, content: 4.8 (msg_id=5)
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT SERVER] Publishing system MQTT topics...
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/uptime, content: -2272 (msg_id=6)
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/freeMem, content: 3011887 (msg_id=7)
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/wifiRSSI, content: -45 (msg_id=8)
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/CPUtemp, content: 75 (msg_id=9)
[0d00h05m35s] 2023-02-03T14:06:46 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Take Image (msg_id=10)
[0d00h05m40s] 2023-02-03T14:06:51 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Aligning (msg_id=11)
[0d00h06m10s] 2023-02-03T14:07:21 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Digitalization of ROIs (msg_id=12)
[0d00h06m10s] 2023-02-03T14:07:21 [CNN] doFlow nach Alignment
[0d00h06m11s] 2023-02-03T14:07:22 [TFLITE] Make Allocate
[0d00h06m11s] 2023-02-03T14:07:22 [CNN] Processing Number 'main'
[0d00h06m11s] 2023-02-03T14:07:22 [CNN] ROI #0 - TfLite
[0d00h06m11s] 2023-02-03T14:07:22 [CNN] CNN Type: Digital100 or Analogue100
[0d00h06m12s] 2023-02-03T14:07:23 [CNN] ROI #1 - TfLite
[0d00h06m12s] 2023-02-03T14:07:23 [CNN] CNN Type: Digital100 or Analogue100
[0d00h06m13s] 2023-02-03T14:07:24 [CNN] ROI #2 - TfLite
[0d00h06m13s] 2023-02-03T14:07:24 [CNN] CNN Type: Digital100 or Analogue100
[0d00h06m14s] 2023-02-03T14:07:25 [CNN] ROI #3 - TfLite
[0d00h06m14s] 2023-02-03T14:07:25 [CNN] CNN Type: Digital100 or Analogue100
[0d00h06m15s] 2023-02-03T14:07:26 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Digitalization of ROIs (msg_id=13)
[0d00h06m15s] 2023-02-03T14:07:26 [CNN] doFlow nach Alignment
[0d00h06m16s] 2023-02-03T14:07:27 [TFLITE] Make Allocate
[0d00h06m16s] 2023-02-03T14:07:27 [CNN] Processing Number 'main'
[0d00h06m16s] 2023-02-03T14:07:27 [CNN] ROI #0 - TfLite
[0d00h06m16s] 2023-02-03T14:07:27 [CNN] CNN Type: Digital100 or Analogue100
[0d00h06m19s] 2023-02-03T14:07:29 [CNN] ROI #1 - TfLite
[0d00h06m19s] 2023-02-03T14:07:29 [CNN] CNN Type: Digital100 or Analogue100
[0d00h06m21s] 2023-02-03T14:07:32 [CNN] ROI #2 - TfLite
[0d00h06m21s] 2023-02-03T14:07:32 [CNN] CNN Type: Digital100 or Analogue100
[0d00h06m24s] 2023-02-03T14:07:35 [CNN] ROI #3 - TfLite
[0d00h06m24s] 2023-02-03T14:07:35 [CNN] CNN Type: Digital100 or Analogue100
[0d00h06m27s] 2023-02-03T14:07:38 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Post-Processing (msg_id=14)
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] getReadout _analog=0, _extendedResolution=1, prev=-1
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] ZeigerEvalAnalogNeu - kein Vorgänger - Ergebnis = 4 zahl: 4.400000 ziffer_vorgaenger = -1 AnalogFehler = 3.000000
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] ZeigerEvalAnalogNeu - Zahl eindeutig, keine Korrektur notwendig - Ergebnis = 7 zahl: 7.500000 ziffer_vorgaenger = 4 AnalogFehler = 3.000000
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] ZeigerEvalAnalogNeu - Zahl eindeutig, keine Korrektur notwendig - Ergebnis = 0 zahl: 0.500000 ziffer_vorgaenger = 7 AnalogFehler = 3.000000
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] ZeigerEvalAnalogNeu - Zahl uneindeutig, Korrektur nach oben - Ergebnis = 6 zahl: 6.200000 ziffer_vorgaenger = 0 AnalogFehler = 3.000000
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] getReadout _analog=0, _extendedResolution=0, prev=6
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] ZeigerEvalAnalogToDigitNeu - digitaleUnschaerfe - Ergebnis = 1 zahl: 0.900000 ziffer_vorgaenger: 6.200000 erg_vorkomma: 1 erg_nachkomma: 0
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] ZeigerEvalHybridNeu - Analoger Vorgänger, Bewertung über ZeigerEvalAnalogNeu = 1 zahl: 0.900000 zahl_vorgaenger = 6.200000 eval_vorgaenger = 6 DigitalUnschaerfe = 0.200000
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] getReadout(dig100) prev=1
[0d00h06m27s] 2023-02-03T14:07:38 [CNN] ZeigerEvalHybridNeu - KEIN Analoger Vorgänger, kein Ziffernwechsel, da Vorkomma weit genug weg = 2 zahl: 2.000000 zahl_vorgaenger = 0.900000 eval_vorgaenger = 1 DigitalUnschaerfe = 0.200000
[0d00h06m28s] 2023-02-03T14:07:38 [CNN] getReadout#ZeigerEvalHybridNeu()= 2
[0d00h06m28s] 2023-02-03T14:07:38 [CNN] getReadout#result= 21
[0d00h06m28s] 2023-02-03T14:07:39 [CNN] ZeigerEvalHybridNeu - KEIN Analoger Vorgänger, kein Ziffernwechsel, da Vorkomma weit genug weg = 4 zahl: 4.000000 zahl_vorgaenger = 2.000000 eval_vorgaenger = 2 DigitalUnschaerfe = 0.200000
[0d00h06m28s] 2023-02-03T14:07:39 [CNN] getReadout#ZeigerEvalHybridNeu()= 4
[0d00h06m28s] 2023-02-03T14:07:39 [CNN] getReadout#result= 421
[0d00h06m28s] 2023-02-03T14:07:39 [CNN] ZeigerEvalHybridNeu - KEIN Analoger Vorgänger, kein Ziffernwechsel, da Vorkomma weit genug weg = 0 zahl: 0.000000 zahl_vorgaenger = 4.000000 eval_vorgaenger = 4 DigitalUnschaerfe = 0.200000
[0d00h06m28s] 2023-02-03T14:07:39 [CNN] getReadout#ZeigerEvalHybridNeu()= 0
[0d00h06m28s] 2023-02-03T14:07:39 [CNN] getReadout#result= 0421
[0d00h06m28s] 2023-02-03T14:07:39 [POSTPROC] main: Raw: 0421.60744, Value: 421.60744, Status: no error
[0d00h06m28s] 2023-02-03T14:07:39 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Sending MQTT (msg_id=15)
[0d00h06m28s] 2023-02-03T14:07:39 [MQTT SERVER] Publishing system MQTT topics...
[0d00h06m28s] 2023-02-03T14:07:39 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/uptime, content: -2219 (msg_id=16)
[0d00h06m28s] 2023-02-03T14:07:39 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/freeMem, content: 3013619 (msg_id=17)
[0d00h06m28s] 2023-02-03T14:07:39 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/wifiRSSI, content: -46 (msg_id=18)
[0d00h06m28s] 2023-02-03T14:07:39 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/CPUtemp, content: 75 (msg_id=19)
[0d00h06m29s] 2023-02-03T14:07:39 [MQTT] Publishing MQTT topics...
[0d00h06m29s] 2023-02-03T14:07:39 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/value, content: 421.60744 (msg_id=20)
[0d00h06m29s] 2023-02-03T14:07:40 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/error, content: no error (msg_id=21)
[0d00h06m29s] 2023-02-03T14:07:40 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/rate, content: -0.000125 (msg_id=22)
[0d00h06m29s] 2023-02-03T14:07:40 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/rate_per_time_unit, content: -0.000125 (msg_id=23)
[0d00h06m29s] 2023-02-03T14:07:40 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/changeabsolut, content: 0.00614 (msg_id=24)
[0d00h06m29s] 2023-02-03T14:07:40 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/rate_per_digitalization_round, content: 0.00614 (msg_id=25)
[0d00h06m29s] 2023-02-03T14:07:40 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/raw, content: 0421.60744 (msg_id=26)
[0d00h06m29s] 2023-02-03T14:07:40 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/timestamp, content: 2023-02-03T14:06:49+0100 (msg_id=27)
[0d00h06m29s] 2023-02-03T14:07:40 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/main/json, content: { "value": "421.60744", "raw": "0421.60744", "pre": "421.60744", .. (msg_id=28)
[0d00h06m29s] 2023-02-03T14:07:40 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Flow finished (msg_id=29)
[0d00h06m29s] 2023-02-03T14:07:40 [TFLITE SERVER] CPU Temperature: 53.3
[0d00h06m29s] 2023-02-03T14:07:40 [TFLITE SERVER] Round #1 completed
[0d00h09m55s] 2023-02-03T14:11:06 [MAIN SERVER] info_get_handler
[0d00h10m16s] 2023-02-03T14:11:27 [TFLITE SERVER] ----------------------------------------------------------------

`

Answered by TopGoalVl

Feb 4, 2023

Danke.
Werde ich angehen.

View full answer

TopGoalVl · 2023-02-04T08:14:10Z

TopGoalVl
Feb 4, 2023
Author

Heute wieder ein Neustart:
Und wieder mit negativen Anfangswerten (Rate, Uptime).

`
[0d18h55m48s] 2023-02-04T08:56:59 [TFLITE SERVER] Round #234 started
[0d18h55m48s] 2023-02-04T08:56:59 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Take Image (msg_id=4670)
[0d18h55m53s] 2023-02-04T08:57:04 [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Aligning (msg_id=4671)
[0d00h00m04s] 2023-02-04T08:14:39 [MAIN] =================================================
[0d00h00m04s] 2023-02-04T08:14:39 [MAIN] ==================== Startup ====================
[0d00h00m04s] 2023-02-04T08:14:39 [MAIN] =================================================
[0d00h00m04s] 2023-02-04T08:14:39 [MAIN] Branch: 'HEAD', Revision: 04f2f23+, Date/Time: 2022-12-19 20:41, Web UI: Release: v13.0.8 (Commit: 04f2f23+)
[0d00h00m04s] 2023-02-04T08:14:39 [MAIN] Reset reason: Exception/panic
[0d00h00m10s] 2023-02-04T08:14:45 [MAIN] =================================================
[0d00h00m10s] 2023-02-04T08:14:45 [MAIN] ================== Main Started =================
[0d00h00m10s] 2023-02-04T08:14:45 [MAIN] =================================================
[0d00h00m10s] 2023-02-04T08:14:45 [MAIN] The device has 8 MBytes of PSRAM
[0d00h00m13s] 2023-02-04T08:14:47 [MAIN] Initialization completed successfully!
[0d00h00m13s] 2023-02-04T08:14:47 [TFLITE SERVER] Restarted due to an Exception/panic! Postponing first round start by 5 minutes to allow for an OTA or to fetch the log!
[0d00h00m13s] 2023-02-04T08:14:47 [TFLITE SERVER] Setting logfile level to DEBUG until the next reboot!
[0d00h04m15s] 2023-02-04T08:18:50 [MAIN SERVER] info_get_handler

`

6 replies

TopGoalVl Feb 4, 2023
Author

V 14.0.0 OTA Upgrade ist durch!

Vielleicht bin ich etwas ungeduldig, aber ist das so gewollt?

TopGoalVl Feb 4, 2023
Author

Alles gut zunächst.
Ich habe mal mit Overview aktualisiert.
Dann wird die 180° Drehung durchgeführt und alle Marker / ROIs sind vorhanden.
Läuft anscheinend gut.
Thx.

caco3 Feb 4, 2023
Collaborator

Du bist noch im aligning schritt, da ist die drehung noch nicht durchgeführt.

UND BITTE, formatiere den code/logs richtig, ich habe dich schon mehrmals darum gebeten!

TopGoalVl Feb 4, 2023
Author

Die Log Einträge füge ich, über die Zwischenablage, im Code Block ein und lasse vor und nach den Einträgen je eine Leerzeile frei.
Es mag mich anscheinend nicht (s. Muster Einträge).
Ich habs gefunden! Auf das Icon zu klicken reicht nicht, man muss noch zusätzliche BACKTICKS einfügen (insgesamt 3 oben und unten)! Das könnte doch auch im Sysmbol hinterlegt sein.

P.S.
V14.0.0 läuft bisher ohne Probleme

Muster:
2023-02-04T17:39:49+0100,main,0422.04472,422.04472,422.04472,0.000103,0.00050,no error,0.0,4.0,2.0,1.9,0.3,4.4,4.8,7.2
2023-02-04T17:44:40+0100,main,0422.04472,422.04472,422.04472,0.000000,0.00000,no error,0.0,4.0,2.0,1.9,0.3,4.4,4.8,7.2
2023-02-04T17:49:31+0100,main,0422.04782,422.04782,422.04782,0.000639,0.00310,no error,0.0,4.0,2.0,1.9,0.3,4.8,7.9,8.2 

[0d05h55m00s] 2023-02-04T20:25:13 <DBG> [MQTT IF] Published topic: LeupoldsPub/Wasserzähler/status, content: Post-Processing (msg_id=1475)
[0d05h55m00s] 2023-02-04T20:25:13 <DBG> [CNN] getReadout _analog=0, _extendedResolution=1, prev=-1
[0d05h55m00s] 2023-02-04T20:25:13 <DBG> [CNN] PointerEvalAnalogNew - No predecessor - Result = 0 number: 0.800000 numeral_preceder = -1 Analog_error = 3
[0d05h55m00s] 2023-02-04T20:25:13 <DBG> [CNN] PointerEvalAnalogNew - number ambiguous, correction upwards - result = 3 number: 3.100000 numeral_preceder = 0 Analog_error = 3
[0d05h55m00s] 2023-02-04T20:25:13 <DBG> [CNN] PointerEvalAnalogNew - number ambiguous, correction upwards - result = 7 number: 7.200000 numeral_preceder = 3 Analog_error = 3
[0d05h55m00s] 2023-02-04T20:25:13 <DBG> [CNN] PointerEvalAnalogNew - number ambiguous, downward correction - result = 0 number: 0.700000 numeral_preceder = 7 Analog_error = 3
[0d05h55m01s] 2023-02-04T20:25:13 <DBG> [CNN] getReadout _analog=0, _extendedResolution=0, prev=0
[0d05h55m01s] 2023-02-04T20:25:13 <DBG> [CNN] PointerEvalAnalogToDigitNew - Digital Uncertainty - Result = 2 number: 1.900000 numeral_preceder: 0.700000 erg before comma: 2 erg after comma: 0

caco3 Feb 4, 2023
Collaborator

insgesamt 3 oben und unten)! Das könnte doch auch im Sysmbol hinterlegt sein.

Genau so ist es. Wird vom Bot auch so erklärt.
Einen zusätzlichen Button fände ich auch schön, aber da smüsste Github machen.

V14.0.0 läuft bisher ohne Probleme

Schön!

TopGoalVl · 2023-02-04T10:22:32Z

TopGoalVl
Feb 4, 2023
Author

Danke.
Werde ich angehen.

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Reset reason: Exception/panic (Warum?) #1970

{{title}}

Replies: 2 comments 6 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

Reset reason: Exception/panic (Warum?) #1970

TopGoalVl Feb 3, 2023

Data log Auszug:

` Message log

Replies: 2 comments · 6 replies

TopGoalVl Feb 4, 2023 Author

TopGoalVl Feb 4, 2023 Author

TopGoalVl Feb 4, 2023 Author

caco3 Feb 4, 2023 Collaborator

TopGoalVl Feb 4, 2023 Author

caco3 Feb 4, 2023 Collaborator

TopGoalVl Feb 4, 2023 Author

TopGoalVl
Feb 3, 2023

`
Message log

Replies: 2 comments 6 replies

TopGoalVl
Feb 4, 2023
Author

TopGoalVl Feb 4, 2023
Author

TopGoalVl Feb 4, 2023
Author

caco3 Feb 4, 2023
Collaborator

TopGoalVl Feb 4, 2023
Author

caco3 Feb 4, 2023
Collaborator

TopGoalVl
Feb 4, 2023
Author