cant get it worked tried already 2 different devices #1662

Crusher9494 · 2022-12-21T22:03:12Z

Crusher9494
Dec 21, 2022

Hello this is my log

`ets Jul 29 2019 12:21:46

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7664
load:0x40078000,len:15360
load:0x40080400,len:3744
entry 0x4008067c
I (27) boot: ESP-IDF 4.3.2 2nd stage bootloader
I (27) boot: compile time 20:02:47
I (27) boot: chip revision: 3
I (30) boot_comm: chip revision: 3, min. bootloader chip revision: 0
I (37) boot.esp32: SPI Speed : 40MHz
I (42) boot.esp32: SPI Mode : DIO
I (46) boot.esp32: SPI Flash Size : 4MB
I (51) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (60) boot: ## Label Usage Type ST Offset Length
I (67) boot: 0 nvs WiFi data 01 02 00009000 00004000
I (75) boot: 1 otadata OTA data 01 00 0000d000 00002000
I (82) boot: 2 phy_init RF data 01 01 0000f000 00001000
I (89) boot: 3 ota_0 OTA app 00 10 00010000 001db000
I (97) boot: 4 ota_1 OTA app 00 11 001f0000 001db000
I (104) boot: End of partition table
I (109) boot_comm: chip revision: 3, min. application chip revision: 0
I (116) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=4bda0h (310688) map
I (243) esp_image: segment 1: paddr=0005bdc8 vaddr=3ffb0000 size=04250h ( 16976) load
I (251) esp_image: segment 2: paddr=00060020 vaddr=400d0020 size=166f00h (1470208) map
I (813) esp_image: segment 3: paddr=001c6f28 vaddr=3ffb4250 size=00038h ( 56) load
I (814) esp_image: segment 4: paddr=001c6f68 vaddr=40080000 size=1b6a0h (112288) load
I (868) esp_image: segment 5: paddr=001e2610 vaddr=50000000 size=00010h ( 16) load
I (881) boot: Loaded app from partition at offset 0x10000
I (882) boot: Disabling RNG early entropy source...
I (893) psram: This chip is ESP32-D0WD
I (894) spiram: Found 64MBit SPI RAM device
I (894) spiram: SPI RAM mode: flash 40m sram 40m
I (899) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (906) cpu_start: Pro cpu up.
I (910) cpu_start: Starting app cpu, entry point is 0x40083b44
I (0) cpu_start: App cpu up.
I (1806) spiram: SPI SRAM memory test OK
I (1814) cpu_start: Pro cpu start user code
I (1814) cpu_start: cpu freq: 160000000
I (1814) cpu_start: Application information:
I (1817) cpu_start: Project name: esp32cam-server-only
I (1823) cpu_start: App version: v13.0.8
I (1828) cpu_start: Compile time: Dec 19 2022 20:41:40
I (1834) cpu_start: ELF file SHA256: 2279775554dcdb30...
I (1841) cpu_start: ESP-IDF: 4.4.2
I (1846) heap_init: Initializing. RAM available for dynamic allocation:
I (1853) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (1859) heap_init: At 3FFC06F0 len 0001F910 (126 KiB): DRAM
I (1865) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (1872) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (1878) heap_init: At 4009B6A0 len 00004960 (18 KiB): IRAM
I (1885) spiram: Adding pool of 4095K of external SPI memory to heap allocator
I (1894) spi_flash: detected chip: generic
I (1897) spi_flash: flash io: dio
I (1907) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1912) spiram: Reserving pool of 40K of internal memory for DMA/internal allocations
I (1922) MAIN:

I (3942) gpio: GPIO[32]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (3972) camera: Detected camera at address=0x30
I (3972) camera: Detected OV2640 camera
I (3972) camera: Camera PID=0x26 VER=0x42 MIDL=0x7f MIDH=0xa2
I (4052) cam_hal: buffer_size: 32768, half_buffer_size: 4096, node_buffer_size: 2048, node_cnt: 16, total_cnt: 15
I (4052) cam_hal: Allocating 61440 Byte frame buffer in PSRAM
I (4062) cam_hal: cam config ok
I (4062) ov2640: Set PLL: clk_2x: 0, clk_div: 0, pclk_auto: 0, pclk_div: 8
I (6152) MAIN: Using SDMMC peripheral
Name: SC16G
Type: SDHC/SDXC
Speed: 20 MHz
Size: 15193MB
I (6442) MAIN: =================================================
I (6472) MAIN: ==================== Startup ====================
I (6492) MAIN: =================================================
I (6512) MAIN: Branch: 'HEAD', Revision: 04f2f23+, Date/Time: 2022-12-19 20:41, Web UI: ?
I (6532) MAIN: Reset reason: Power-on event
I (6562) OTA: Start CheckOTAUpdateCheck...
I (6572) OTA: SHA-256 for the partition table: : 9d4a2809ae90fb20709a8ca3dd3ac3462e1e73286bcd31b689060c91de06fa3a
I (6592) OTA: SHA-256 for bootloader: : 4a9573dafac5d5c79c43e5a356568332da3a99dd2e220da6ceeadc96d32708a2
I (7142) OTA: SHA-256 for current firmware: : 355e1c6ae8b38e8311d1d117c00cc1016379005a25333ffa59d3043261449699
I (7212) wifi:wifi driver task: 3ffd4c54, prio:23, stack:6656, core=0
I (7212) system_api: Base MAC address is not set
I (7212) system_api: read default base MAC address from EFUSE
I (7222) wifi:wifi firmware version: eeaa27d
I (7222) wifi:wifi certification version: v7.0
I (7222) wifi:config NVS flash: enabled
I (7222) wifi:config nano formating: disabled
I (7232) wifi:Init data frame dynamic rx buffer num: 16
I (7232) wifi:Init management frame dynamic rx buffer num: 16
I (7242) wifi:Init management short buffer num: 32
I (7242) wifi:Init static tx buffer num: 16
I (7252) wifi:Init tx cache buffer num: 16
I (7252) wifi:Init static rx buffer size: 1600
I (7262) wifi:Init static rx buffer num: 10
I (7262) wifi:Init dynamic rx buffer num: 16
I (7262) wifi_init: rx ba win: 6
I (7272) wifi_init: tcpip mbox: 32
I (7272) wifi_init: udp mbox: 6
I (7272) wifi_init: tcp mbox: 6
I (7282) wifi_init: tcp tx win: 5744
I (7282) wifi_init: tcp rx win: 5744
I (7292) wifi_init: tcp mss: 1440
I (7292) wifi_init: WiFi IRAM OP enabled
I (7302) wifi_init: WiFi RX IRAM OP enabled
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.

Core 0 register dump:
PC : 0x4008baad PS : 0x00060730 A0 : 0x80112e4b A1 : 0x3ffc3690
A2 : 0x3ffc3778 A3 : 0x00000000 A4 : 0x000000ff A5 : 0x0000ff00
A6 : 0x00ff0000 A7 : 0xff000000 A8 : 0x00000000 A9 : 0x3ffc3650
A10 : 0x3ffc3778 A11 : 0x3f4328b7 A12 : 0x00000000 A13 : 0x40112990
A14 : 0x00000000 A15 : 0x3ffc3814 SAR : 0x0000000d EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000000 LBEG : 0x4008baad LEND : 0x4008bac5 LCOUNT : 0xffffffff

Backtrace:0x4008baaa:0x3ffc36900x40112e48:0x3ffc36a0 0x400d39e0:0x3ffc3850 0x40235776:0x3ffc39a0

ELF file SHA256: 2279775554dcdb30

Rebooting...
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7664
load:0x40078000,len:15360
load:0x40080400,len:3744
entry 0x4008067c
I (27) boot: ESP-IDF 4.3.2 2nd stage bootloader
I (27) boot: compile time 20:02:47
I (27) boot: chip revision: 3
I (30) boot_comm: chip revision: 3, min. bootloader chip revision: 0
I (37) boot.esp32: SPI Speed : 40MHz
I (42) boot.esp32: SPI Mode : DIO
I (46) boot.esp32: SPI Flash Size : 4MB
I (51) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (60) boot: ## Label Usage Type ST Offset Length
I (67) boot: 0 nvs WiFi data 01 02 00009000 00004000
I (74) boot: 1 otadata OTA data 01 00 0000d000 00002000
I (82) boot: 2 phy_init RF data 01 01 0000f000 00001000
I (89) boot: 3 ota_0 OTA app 00 10 00010000 001db000
I (97) boot: 4 ota_1 OTA app 00 11 001f0000 001db000
I (104) boot: End of partition table
I (109) boot_comm: chip revision: 3, min. application chip revision: 0
I (116) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=4bda0h (310688) map
I (243) esp_image: segment 1: paddr=0005bdc8 vaddr=3ffb0000 size=04250h ( 16976) load
I (250) esp_image: segment 2: paddr=00060020 vaddr=400d0020 size=166f00h (1470208) map
I (813) esp_image: segment 3: paddr=001c6f28 vaddr=3ffb4250 size=00038h ( 56) load
I (813) esp_image: segment 4: paddr=001c6f68 vaddr=40080000 size=1b6a0h (112288) load
I (867) esp_image: segment 5: paddr=001e2610 vaddr=50000000 size=00010h ( 16) load
I (881) boot: Loaded app from partition at offset 0x10000
I (881) boot: Disabling RNG early entropy source...
I (893) psram: This chip is ESP32-D0WD
I (894) spiram: Found 64MBit SPI RAM device
I (894) spiram: SPI RAM mode: flash 40m sram 40m
I (898) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (906) cpu_start: Pro cpu up.
I (909) cpu_start: Starting app cpu, entry point is 0x40083b44
I (903) cpu_start: App cpu up.
I (1806) spiram: SPI SRAM memory test OK
I (1814) cpu_start: Pro cpu start user code
I (1814) cpu_start: cpu freq: 160000000
I (1814) cpu_start: Application information:
I (1817) cpu_start: Project name: esp32cam-server-only
I (1823) cpu_start: App version: v13.0.8
I (1828) cpu_start: Compile time: Dec 19 2022 20:41:40
I (1834) cpu_start: ELF file SHA256: 2279775554dcdb30...
I (1840) cpu_start: ESP-IDF: 4.4.2
I (1846) heap_init: Initializing. RAM available for dynamic allocation:
I (1853) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (1859) heap_init: At 3FFC06F0 len 0001F910 (126 KiB): DRAM
I (1865) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (1872) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (1878) heap_init: At 4009B6A0 len 00004960 (18 KiB): IRAM
I (1885) spiram: Adding pool of 4095K of external SPI memory to heap allocator
I (1894) spi_flash: detected chip: generic
I (1897) spi_flash: flash io: dio
I (1907) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1912) spiram: Reserving pool of 40K of internal memory for DMA/internal allocations
I (1922) MAIN:

I (3942) gpio: GPIO[32]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (3972) camera: Detected camera at address=0x30
I (3972) camera: Detected OV2640 camera
I (3972) camera: Camera PID=0x26 VER=0x42 MIDL=0x7f MIDH=0xa2
I (4052) cam_hal: buffer_size: 32768, half_buffer_size: 4096, node_buffer_size: 2048, node_cnt: 16, total_cnt: 15
I (4052) cam_hal: Allocating 61440 Byte frame buffer in PSRAM
I (4062) cam_hal: cam config ok
I (4062) ov2640: Set PLL: clk_2x: 0, clk_div: 0, pclk_auto: 0, pclk_div: 8
I (6152) MAIN: Using SDMMC peripheral
Name: SC16G
Type: SDHC/SDXC
Speed: 20 MHz
Size: 15193MB
I (6292) MAIN: =================================================
I (6312) MAIN: ==================== Startup ====================
I (6322) MAIN: =================================================
I (6342) MAIN: Branch: 'HEAD', Revision: 04f2f23+, Date/Time: 2022-12-19 20:41, Web UI: ?
I (6362) MAIN: Reset reason: Exception/panic
I (6382) OTA: Start CheckOTAUpdateCheck...
I (6402) OTA: SHA-256 for the partition table: : 9d4a2809ae90fb20709a8ca3dd3ac3462e1e73286bcd31b689060c91de06fa3a
I (6422) OTA: SHA-256 for bootloader: : 4a9573dafac5d5c79c43e5a356568332da3a99dd2e220da6ceeadc96d32708a2
I (6972) OTA: SHA-256 for current firmware: : 355e1c6ae8b38e8311d1d117c00cc1016379005a25333ffa59d3043261449699
I (7042) wifi:wifi driver task: 3ffd4c74, prio:23, stack:6656, core=0
I (7042) system_api: Base MAC address is not set
I (7042) system_api: read default base MAC address from EFUSE
I (7052) wifi:wifi firmware version: eeaa27d
I (7052) wifi:wifi certification version: v7.0
I (7052) wifi:config NVS flash: enabled
I (7052) wifi:config nano formating: disabled
I (7062) wifi:Init data frame dynamic rx buffer num: 16
I (7062) wifi:Init management frame dynamic rx buffer num: 16
I (7072) wifi:Init management short buffer num: 32
I (7072) wifi:Init static tx buffer num: 16
I (7082) wifi:Init tx cache buffer num: 16
I (7082) wifi:Init static rx buffer size: 1600
I (7092) wifi:Init static rx buffer num: 10
I (7092) wifi:Init dynamic rx buffer num: 16
I (7092) wifi_init: rx ba win: 6
I (7102) wifi_init: tcpip mbox: 32
I (7102) wifi_init: udp mbox: 6
I (7102) wifi_init: tcp mbox: 6
I (7112) wifi_init: tcp tx win: 5744
I (7112) wifi_init: tcp rx win: 5744
I (7122) wifi_init: tcp mss: 1440
I (7122) wifi_init: WiFi IRAM OP enabled
I (7132) wifi_init: WiFi RX IRAM OP enabled
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.

Core 0 register dump:
PC : 0x4008baad PS : 0x00060730 A0 : 0x80112e4b A1 : 0x3ffc3690
A2 : 0x3ffc3778 A3 : 0x00000000 A4 : 0x000000ff A5 : 0x0000ff00
A6 : 0x00ff0000 A7 : 0xff000000 A8 : 0x00000000 A9 : 0x3ffc3650
A10 : 0x3ffc3778 A11 : 0x3f4328b7 A12 : 0x00000000 A13 : 0x40112990
A14 : 0x00000000 A15 : 0x3ffc3814 SAR : 0x0000000d EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000000 LBEG : 0x4008baad LEND : 0x4008bac5 LCOUNT : 0xffffffff

Backtrace:0x4008baaa:0x3ffc36900x40112e48:0x3ffc36a0 0x400d39e0:0x3ffc3850 0x40235776:0x3ffc39a0

ELF file SHA256: 2279775554dcdb30

Rebooting...
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7664
load:0x40078000,len:15360
load:0x40080400,len:3744
entry 0x4008067c
I (27) boot: ESP-IDF 4.3.2 2nd stage bootloader
I (27) boot: compile time 20:02:47
I (27) boot: chip revision: 3
I (30) boot_comm: chip revision: 3, min. bootloader chip revision: 0
I (37) boot.esp32: SPI Speed : 40MHz
I (42) boot.esp32: SPI Mode : DIO
I (46) boot.esp32: SPI Flash Size : 4MB
I (51) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (60) boot: ## Label Usage Type ST Offset Length
I (67) boot: 0 nvs WiFi data 01 02 00009000 00004000
I (74) boot: 1 otadata OTA data 01 00 0000d000 00002000
I (82) boot: 2 phy_init RF data 01 01 0000f000 00001000
I (89) boot: 3 ota_0 OTA app 00 10 00010000 001db000
I (97) boot: 4 ota_1 OTA app 00 11 001f0000 001db000
I (104) boot: End of partition table
I (109) boot_comm: chip revision: 3, min. application chip revision: 0
I (116) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=4bda0h (310688) map
I (243) esp_image: segment 1: paddr=0005bdc8 vaddr=3ffb0000 size=04250h ( 16976) load
I (250) esp_image: segment 2: paddr=00060020 vaddr=400d0020 size=166f00h (1470208) map
I (813) esp_image: segment 3: paddr=001c6f28 vaddr=3ffb4250 size=00038h ( 56) load
I (813) esp_image: segment 4: paddr=001c6f68 vaddr=40080000 size=1b6a0h (112288) load
I (867) esp_image: segment 5: paddr=001e2610 vaddr=50000000 size=00010h ( 16) load
I (881) boot: Loaded app from partition at offset 0x10000
I (881) boot: Disabling RNG early entropy source...
I (893) psram: This chip is ESP32-D0WD
I (894) spiram: Found 64MBit SPI RAM device
I (894) spiram: SPI RAM mode: flash 40m sram 40m
I (898) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (906) cpu_start: Pro cpu up.
I (909) cpu_start: Starting app cpu, entry point is 0x40083b44
I (903) cpu_start: App cpu up.
I (1806) spiram: SPI SRAM memory test OK
I (1814) cpu_start: Pro cpu start user code
I (1814) cpu_start: cpu freq: 160000000
I (1814) cpu_start: Application information:
I (1817) cpu_start: Project name: esp32cam-server-only
I (1823) cpu_start: App version: v13.0.8
I (1828) cpu_start: Compile time: Dec 19 2022 20:41:40
I (1834) cpu_start: ELF file SHA256: 2279775554dcdb30...
I (1840) cpu_start: ESP-IDF: 4.4.2
I (1846) heap_init: Initializing. RAM available for dynamic allocation:
I (1853) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (1859) heap_init: At 3FFC06F0 len 0001F910 (126 KiB): DRAM
I (1865) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (1871) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (1878) heap_init: At 4009B6A0 len 00004960 (18 KiB): IRAM
I (1885) spiram: Adding pool of 4095K of external SPI memory to heap allocator
I (1894) spi_flash: detected chip: generic
I (1897) spi_flash: flash io: dio
I (1907) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1912) spiram: Reserving pool of 40K of internal memory for DMA/internal allocations
I (1922) MAIN:

I tried many solutions but i dont see my mistake? I tried the ESPtool and flashed the ESP32 also i used the WEB installer both seems not working for me even with the CH340 USB Adapter or the FTDI. All LEDs from the ESP32 CAM remain dark
any suggests?

Crusher9494 · 2022-12-21T22:30:47Z

Crusher9494
Dec 21, 2022
Author

when i flash to version 12.0.1 this happens

`
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7568
load:0x40078000,len:15360
load:0x40080400,len:3744
entry 0x4008067c
I (27) boot: ESP-IDF 4.3.2 2nd stage bootloader
I (27) boot: compile time 17:20:48
I (27) boot: chip revision: 3
I (30) boot_comm: chip revision: 3, min. bootloader chip revision: 0
I (37) boot.esp32: SPI Speed : 40MHz
I (42) boot.esp32: SPI Mode : DIO
I (46) boot.esp32: SPI Flash Size : 4MB
I (51) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (60) boot: ## Label Usage Type ST Offset Length
I (67) boot: 0 nvs WiFi data 01 02 00009000 00004000
I (75) boot: 1 otadata OTA data 01 00 0000d000 00002000
I (82) boot: 2 phy_init RF data 01 01 0000f000 00001000
I (89) boot: 3 ota_0 OTA app 00 10 00010000 001db000
I (97) boot: 4 ota_1 OTA app 00 11 001f0000 001db000
I (104) boot: End of partition table
I (109) boot_comm: chip revision: 3, min. application chip revision: 0
I (116) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=4df30h (319280) map
I (247) esp_image: segment 1: paddr=0005df58 vaddr=3ffb0000 size=020c0h ( 8384) load
I (250) esp_image: segment 2: paddr=00060020 vaddr=400d0020 size=15e00ch (1433612) map
I (801) esp_image: segment 3: paddr=001be034 vaddr=3ffb20c0 size=029f8h ( 10744) load
I (806) esp_image: segment 4: paddr=001c0a34 vaddr=40080000 size=1c1f4h (115188) load
I (857) esp_image: segment 5: paddr=001dcc30 vaddr=50000000 size=00010h ( 16) load
I (871) boot: Loaded app from partition at offset 0x10000
I (871) boot: Disabling RNG early entropy source...
I (883) psram: This chip is ESP32-D0WD
I (883) spiram: Found 64MBit SPI RAM device
I (883) spiram: SPI RAM mode: flash 40m sram 40m
I (888) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (895) cpu_start: Pro cpu up.
I (899) cpu_start: Starting app cpu, entry point is 0x40082cbc
I (0) cpu_start: App cpu up.
I (1796) spiram: SPI SRAM memory test OK
I (1804) cpu_start: Pro cpu start user code
I (1804) cpu_start: cpu freq: 160000000
I (1804) cpu_start: Application information:
I (1807) cpu_start: Project name: esp32cam-server-only
I (1813) cpu_start: App version: v12.0.1
I (1818) cpu_start: Compile time: Sep 29 2022 17:14:06
I (1824) cpu_start: ELF file SHA256: 28356ed42df4c694...
I (1830) cpu_start: ESP-IDF: 4.3.2
I (1835) heap_init: Initializing. RAM available for dynamic allocation:
I (1842) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (1849) heap_init: At 3FFC0988 len 0001F678 (125 KiB): DRAM
I (1855) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (1861) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (1868) heap_init: At 4009C1F4 len 00003E0C (15 KiB): IRAM
I (1874) spiram: Adding pool of 4096K of external SPI memory to heap allocator
I (1883) spi_flash: detected chip: generic
I (1887) spi_flash: flash io: dio
I (1897) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1902) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations

Branch: 'HEAD', Tag: 'v12.0.1', Revision: `dfe2c46`, Date/Time: 2022-09-29 17:13

I (3952) gpio: GPIO[32]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (3992) camera: Detected camera at address=0x30
I (3992) camera: Detected OV2640 camera
I (3992) camera: Camera PID=0x26 VER=0x42 MIDL=0x7f MIDH=0xa2
I (4072) cam_hal: buffer_size: 32768, half_buffer_size: 4096, node_buffer_size: 2048, node_cnt: 16, total_cnt: 15
I (4072) cam_hal: Allocating 61440 Byte frame buffer in PSRAM
I (4082) cam_hal: cam config ok
I (4082) ov2640: Set PLL: clk_2x: 0, clk_div: 0, pclk_auto: 0, pclk_div: 8
Internal Flash-LED turn off PWM
After camera initialization: sleep for : 200ms
I (6172) main: Using SDMMC peripheral
Name: SC16G
Type: SDHC/SDXC
Speed: 20 MHz
Size: 15193MB
I (6362) server_ota: Start CheckOTAUpdateCheck ...
Start CheckOTAUpdateCheck ...
I (6372) server_ota: SHA-256 for the partition table: : 9d4a2809ae90fb20709a8ca3dd3ac3462e1e73286bcd31b689060c91de06fa3a
I (6382) server_ota: SHA-256 for bootloader: : 140ccdb42090cffb95ee25cdde60445d4694ad58bf3160157ca0e86d49aeb679
I (6392) server_ota: SHA-256 for current firmware: : b01e932abb62b049e585b8edb2209f55edcd7165591d305f7b35ae645da26719
CheckOTAUpdate Partition: ESP_OK
open file /sdcard/wlan.ini in mode r
Error: file /sdcard/wlan.ini does not exist!
file loaded
No SSID and PASSWORD set!!!Hostname not set.
I (6452) wifi:wifi driver task: 3ffdb840, prio:23, stack:6656, core=0
I (6452) system_api: Base MAC address is not set
I (6452) system_api: read default base MAC address from EFUSE
I (6462) wifi:wifi firmware version: eb52264
I (6462) wifi:wifi certification version: v7.0
I (6462) wifi:config NVS flash: enabled
I (6472) wifi:config nano formating: disabled
I (6472) wifi:Init data frame dynamic rx buffer num: 16
I (6482) wifi:Init management frame dynamic rx buffer num: 16
I (6482) wifi:Init management short buffer num: 32
I (6492) wifi:Init static tx buffer num: 16
I (6492) wifi:Init tx cache buffer num: 16
I (6492) wifi:Init static rx buffer size: 1600
I (6502) wifi:Init static rx buffer num: 10
I (6502) wifi:Init dynamic rx buffer num: 16
I (6512) wifi_init: rx ba win: 6
I (6512) wifi_init: tcpip mbox: 32
I (6512) wifi_init: udp mbox: 6
I (6522) wifi_init: tcp mbox: 6
I (6522) wifi_init: tcp tx win: 5744
I (6532) wifi_init: tcp rx win: 5744
I (6532) wifi_init: tcp mss: 1440
I (6532) wifi_init: WiFi IRAM OP enabled
I (6542) wifi_init: WiFi RX IRAM OP enabled
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.

Core 0 register dump:
PC : 0x4008b95d PS : 0x00060430 A0 : 0x800e1dee A1 : 0x3ffc3820
A2 : 0x3ffc3900 A3 : 0x00000000 A4 : 0x000000ff A5 : 0x0000ff00
A6 : 0x00ff0000 A7 : 0xff000000 A8 : 0x00000000 A9 : 0x3ffc37e0
A10 : 0x3ffc3900 A11 : 0x3f40bf0a A12 : 0x00000000 A13 : 0x400e1994
A14 : 0x00000000 A15 : 0x3ffc399c SAR : 0x0000001d EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000000 LBEG : 0x4008b95d LEND : 0x4008b975 LCOUNT : 0xffffffff

Backtrace:0x4008b95a:0x3ffc3820 0x400e1deb:0x3ffc3830 0x400d3cd0:0x3ffc39e0 0x4022dd93:0x3ffc3b20

ELF file SHA256: 28356ed42df4c694

Rebooting...
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7568
load:0x40078000,len:15360
load:0x40080400,len:3744
entry 0x4008067c
I (27) boot: ESP-IDF 4.3.2 2nd stage bootloader
I (27) boot: compile time 17:20:48
I (27) boot: chip revision: 3
I (30) boot_comm: chip revision: 3, min. bootloader chip revision: 0
I (37) boot.esp32: SPI Speed : 40MHz
I (42) boot.esp32: SPI Mode : DIO
I (46) boot.esp32: SPI Flash Size : 4MB
I (51) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (60) boot: ## Label Usage Type ST Offset Length
I (67) boot: 0 nvs WiFi data 01 02 00009000 00004000
I (74) boot: 1 otadata OTA data 01 00 0000d000 00002000
I (82) boot: 2 phy_init RF data 01 01 0000f000 00001000
I (89) boot: 3 ota_0 OTA app 00 10 00010000 001db000
I (97) boot: 4 ota_1 OTA app 00 11 001f0000 001db000
I (104) boot: End of partition table
I (109) boot_comm: chip revision: 3, min. application chip revision: 0
I (116) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=4df30h (319280) map
I (247) esp_image: segment 1: paddr=0005df58 vaddr=3ffb0000 size=020c0h ( 8384) load
I (250) esp_image: segment 2: paddr=00060020 vaddr=400d0020 size=15e00ch (1433612) map
I (801) esp_image: segment 3: paddr=001be034 vaddr=3ffb20c0 size=029f8h ( 10744) load
I (806) esp_image: segment 4: paddr=001c0a34 vaddr=40080000 size=1c1f4h (115188) load
I (856) esp_image: segment 5: paddr=001dcc30 vaddr=50000000 size=00010h ( 16) load
I (871) boot: Loaded app from partition at offset 0x10000
I (871) boot: Disabling RNG early entropy source...
I (883) psram: This chip is ESP32-D0WD
I (883) spiram: Found 64MBit SPI RAM device
I (883) spiram: SPI RAM mode: flash 40m sram 40m
I (888) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (895) cpu_start: Pro cpu up.
I (899) cpu_start: Starting app cpu, entry point is 0x40082cbc
I (892) cpu_start: App cpu up.
I (1796) spiram: SPI SRAM memory test OK
I (1804) cpu_start: Pro cpu start user code
I (1804) cpu_start: cpu freq: 160000000
I (1804) cpu_start: Application information:
I (1807) cpu_start: Project name: esp32cam-server-only
I (1813) cpu_start: App version: v12.0.1
I (1818) cpu_start: Compile time: Sep 29 2022 17:14:06
I (1824) cpu_start: ELF file SHA256: 28356ed42df4c694...
I (1830) cpu_start: ESP-IDF: 4.3.2
I (1835) heap_init: Initializing. RAM available for dynamic allocation:
I (1842) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (1848) heap_init: At 3FFC0988 len 0001F678 (125 KiB): DRAM
I (1855) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (1861) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (1868) heap_init: At 4009C1F4 len 00003E0C (15 KiB): IRAM
I (1874) spiram: Adding pool of 4096K of external SPI memory to heap allocator
I (1883) spi_flash: detected chip: generic
I (1887) spi_flash: flash io: dio
I (1897) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1901) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations

Branch: 'HEAD', Tag: 'v12.0.1', Revision: `dfe2c46`, Date/Time: 2022-09-29 17:13

I (3951) gpio: GPIO[32]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (3991) camera: Detected camera at address=0x30
I (3991) camera: Detected OV2640 camera
I (3991) camera: Camera PID=0x26 VER=0x42 MIDL=0x7f MIDH=0xa2
I (4071) cam_hal: buffer_size: 32768, half_buffer_size: 4096, node_buffer_size: 2048, node_cnt: 16, total_cnt: 15
I (4071) cam_hal: Allocating 61440 Byte frame buffer in PSRAM
I (4081) cam_hal: cam config ok
I (4081) ov2640: Set PLL: clk_2x: 0, clk_div: 0, pclk_auto: 0, pclk_div: 8
Internal Flash-LED turn off PWM
After camera initialization: sleep for : 200ms
I (6171) main: Using SDMMC peripheral
Name: SC16G
Type: SDHC/SDXC
Speed: 20 MHz
Size: 15193MB
I (6241) server_ota: Start CheckOTAUpdateCheck ...
Start CheckOTAUpdateCheck ...
I (6251) server_ota: SHA-256 for the partition table: : 9d4a2809ae90fb20709a8ca3dd3ac3462e1e73286bcd31b689060c91de06fa3a
I (6261) server_ota: SHA-256 for bootloader: : 140ccdb42090cffb95ee25cdde60445d4694ad58bf3160157ca0e86d49aeb679
I (6271) server_ota: SHA-256 for current firmware: : b01e932abb62b049e585b8edb2209f55edcd7165591d305f7b35ae645da26719
CheckOTAUpdate Partition: ESP_OK
open file /sdcard/wlan.ini in mode r
Error: file /sdcard/wlan.ini does not exist!
file loaded
No SSID and PASSWORD set!!!Hostname not set.
I (6331) wifi:wifi driver task: 3ffdb840, prio:23, stack:6656, core=0
I (6331) system_api: Base MAC address is not set
I (6331) system_api: read default base MAC address from EFUSE
I (6341) wifi:wifi firmware version: eb52264
I (6341) wifi:wifi certification version: v7.0
I (6341) wifi:config NVS flash: enabled
I (6351) wifi:config nano formating: disabled
I (6351) wifi:Init data frame dynamic rx buffer num: 16
I (6361) wifi:Init management frame dynamic rx buffer num: 16
I (6361) wifi:Init management short buffer num: 32
I (6371) wifi:Init static tx buffer num: 16
I (6371) wifi:Init tx cache buffer num: 16
I (6371) wifi:Init static rx buffer size: 1600
I (6381) wifi:Init static rx buffer num: 10
I (6381) wifi:Init dynamic rx buffer num: 16
I (6391) wifi_init: rx ba win: 6
I (6391) wifi_init: tcpip mbox: 32
I (6391) wifi_init: udp mbox: 6
I (6401) wifi_init: tcp mbox: 6
I (6401) wifi_init: tcp tx win: 5744
I (6411) wifi_init: tcp rx win: 5744
I (6411) wifi_init: tcp mss: 1440
I (6411) wifi_init: WiFi IRAM OP enabled
I (6421) wifi_init: WiFi RX IRAM OP enabled
Guru Meditation Error: Core 0 panic'ed (LoadProhibited). Exception was unhandled.

Core 0 register dump:
PC : 0x4008b95d PS : 0x00060430 A0 : 0x800e1dee A1 : 0x3ffc3820
A2 : 0x3ffc3900 A3 : 0x00000000 A4 : 0x000000ff A5 : 0x0000ff00
A6 : 0x00ff0000 A7 : 0xff000000 A8 : 0x00000000 A9 : 0x3ffc37e0
A10 : 0x3ffc3900 A11 : 0x3f40bf0a A12 : 0x00000000 A13 : 0x400e1994
A14 : 0x00000000 A15 : 0x3ffc399c SAR : 0x0000001d EXCCAUSE: 0x0000001c
EXCVADDR: 0x00000000 LBEG : 0x4008b95d LEND : 0x4008b975 LCOUNT : 0xffffffff

Backtrace:0x4008b95a:0x3ffc3820 0x400e1deb:0x3ffc3830 0x400d3cd0:0x3ffc39e0 0x4022dd93:0x3ffc3b20

ELF file SHA256: 28356ed42df4c694

Rebooting...
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7568
load:0x40078000,len:15360
load:0x40080400,len:3744
entry 0x4008067c
I (27) boot: ESP-IDF 4.3.2 2nd stage bootloader
I (27) boot: compile time 17:20:48
I (27) boot: chip revision: 3
I (30) boot_comm: chip revision: 3, min. bootloader chip revision: 0
I (37) boot.esp32: SPI Speed : 40MHz
I (42) boot.esp32: SPI Mode : DIO
I (46) boot.esp32: SPI Flash Size : 4MB
I (51) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (60) boot: ## Label Usage Type ST Offset Length
I (67) boot: 0 nvs WiFi data 01 02 00009000 00004000
I (74) boot: 1 otadata OTA data 01 00 0000d000 00002000
I (82) boot: 2 phy_init RF data 01 01 0000f000 00001000
I (89) boot: 3 ota_0 OTA app 00 10 00010000 001db000
I (97) boot: 4 ota_1 OTA app 00 11 001f0000 001db000
I (104) boot: End of partition table
I (109) boot_comm: chip revision: 3, min. application chip revision: 0
I (116) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=4df30h (319280) map
I (247) esp_image: segment 1: paddr=0005df58 vaddr=3ffb0000 size=020c0h ( 8384) load
I (250) esp_image: segment 2: paddr=00060020 vaddr=400d0020 size=15e00ch (1433612) map
I (801) esp_image: segment 3: paddr=001be034 vaddr=3ffb20c0 size=029f8h ( 10744) load
I (806) esp_image: segment 4: paddr=001c0a34 vaddr=40080000 size=1c1f4h (115188) load
I (856) esp_image: segment 5: paddr=001dcc30 vaddr=50000000 size=00010h ( 16) load
I (871) boot: Loaded app from partition at offset 0x10000
I (871) boot: Disabling RNG early entropy source...
I (883) psram: This chip is ESP32-D0WD
I (883) spiram: Found 64MBit SPI RAM device
I (883) spiram: SPI RAM mode: flash 40m sram 40m
I (888) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (895) cpu_start: Pro cpu up.
I (899) cpu_start: Starting app cpu, entry point is 0x40082cbc
I (892) cpu_start: App cpu up.
I (1796) spiram: SPI SRAM memory test OK
I (1804) cpu_start: Pro cpu start user code
I (1804) cpu_start: cpu freq: 160000000
I (1804) cpu_start: Application information:
I (1807) cpu_start: Project name: esp32cam-server-only
I (1813) cpu_start: App version: v12.0.1
I (1818) cpu_start: Compile time: Sep 29 2022 17:14:06
I (1824) cpu_start: ELF file SHA256: 28356ed42df4c694...
I (1830) cpu_start: ESP-IDF: 4.3.2
I (1835) heap_init: Initializing. RAM available for dynamic allocation:
I (1842) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (1848) heap_init: At 3FFC0988 len 0001F678 (125 KiB): DRAM
I (1855) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (1861) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (1868) heap_init: At 4009C1F4 len 00003E0C (15 KiB): IRAM
I (1874) spiram: Adding pool of 4096K of external SPI memory to heap allocator
I (1883) spi_flash: detected chip: generic
I (1887) spi_flash: flash io: dio
I (1897) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1901) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations

Branch: 'HEAD', Tag: 'v12.0.1', Revision: `dfe2c46`, Date/Time: 2022-09-29 17:13

0 replies

jomjol · 2022-12-22T16:09:07Z

jomjol
Dec 22, 2022
Maintainer

I don't see an obvious reason. It crashes during the WLAN setup procedure, which is very unusally.
Maybe a hardware defect?

0 replies

nliaudat · 2022-12-25T09:29:18Z

nliaudat
Dec 25, 2022

open file /sdcard/wlan.ini in mode r
Error: file /sdcard/wlan.ini does not exist!
file loaded
No SSID and PASSWORD set!!!Hostname not set.

Please check your wlan.ini configuration

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

cant get it worked tried already 2 different devices #1662

{{title}}

Replies: 3 comments

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

Select a reply

cant get it worked tried already 2 different devices #1662

Crusher9494 Dec 21, 2022

Replies: 3 comments

Crusher9494 Dec 21, 2022 Author

Branch: 'HEAD', Tag: 'v12.0.1', Revision: dfe2c46, Date/Time: 2022-09-29 17:13

Branch: 'HEAD', Tag: 'v12.0.1', Revision: dfe2c46, Date/Time: 2022-09-29 17:13

Branch: 'HEAD', Tag: 'v12.0.1', Revision: dfe2c46, Date/Time: 2022-09-29 17:13

jomjol Dec 22, 2022 Maintainer

nliaudat Dec 25, 2022

Crusher9494
Dec 21, 2022

Crusher9494
Dec 21, 2022
Author

Branch: 'HEAD', Tag: 'v12.0.1', Revision: `dfe2c46`, Date/Time: 2022-09-29 17:13

Branch: 'HEAD', Tag: 'v12.0.1', Revision: `dfe2c46`, Date/Time: 2022-09-29 17:13

Branch: 'HEAD', Tag: 'v12.0.1', Revision: `dfe2c46`, Date/Time: 2022-09-29 17:13

jomjol
Dec 22, 2022
Maintainer

nliaudat
Dec 25, 2022