manual correction

[Micha-65]

The Feature

Is there somewhere to tell the system that the detected value is wrong and enter a correction?
a workout?
If yes, where?
I use version 13.0.7 with a gas meter.
Thanks Micha

[caco3]

Use the menu Settings > Set Previous Value

[Micha-65]

But, does the system learn, for example, by the fact that the eight at this point is a six?

[caco3]

Ah, you mean that it recognizes the number wrong?

• You could try a different model, see https://github.com/jomjol/AI-on-the-edge-device/wiki/Choosing-the-Model
• If some number still are wrong, check if your ROIs are setup ok and the digits are already contained in the database, see https://github.com/jomjol/AI-on-the-edge-device/wiki/ROI-Configuration

[Micha-65]

Yes, exactly, I see the correct number on the display, but he gets it wrong every time.
Then you should be able to tell him what is correct.
I have now changed something on the model, we'll see.
I'm also looking for something against the reflections, that would also help a lot.
hp my english is not good, i will take a translate.
Excuse me.
German would be better ;-)

[jomjol]

The model is a trained neural network. It cannot be trained on the ESP32. Even on modern computers it takes quite some time (30-90 Minutens). The way to go is: collect wrong detected images, label them and support them as training data.

You can do also your own training: https://github.com/jomjol/AI-on-the-edge-device/wiki/Learn-models-with-your-own-images