Support for other MIN series models

[simar7]

Hello! Thanks for the project.

I was wondering if other MIN series models are supported? I see the list here but was curious if MIN 7600 TL-XH-US was supported or not?

[johanmeijer]

I do think it should be supported, but we will now for sure if we test it. Try to run Grott beta version with invtype=min.

[typxxi]

You will need one MIN whatsoever with a TL-XH version which is the high voltage hybrid inverter who confirms that the MIN is working.
Min 4600 TL for example is from the same family in general (MiN TL are 2 mppt inverters) but without hybrid option.

Afaik MIN is working but not sure about Hybrid and especiall 7600 which has not being sold in the EU I bet cause for example we have a limit for 1 phase inverters of 4600 Watt, but I have known the MiN 6000 as the biggest one cause in some EU states 6000 W is the limit for 1 phase. I was not aware that a MiN 7600 even exists cause it was not published in our listings which ended with a MiN 6000 and a * which explains that this was not sold here due to the 4600 W limitations.

In general the MiN4600 and MiN6000 have the same hardware and the only difference is the firmware. But I guess the MiN7600 will be a different least regarding dimensions and an even bigger passive alu cooling block.
I am still playing around with grott but not using it in a productive way but it seem to work for all the MiC 600 to MiC 2000, then the MiC 3000 and MiN 4600 which we have and also a SPH4600 which is a single phase hybrid with a low voltage battery (48 V nominal, here 51,2 V with 16s LiFePo4 cells). But I think I have read somewhere that someone had a MIN hybrid running in Homeassistant.

People tend to use the software but not reporting back if it is working or what is working and what not. Therefore I am testing here carefully our family of 7 inverters and hope to report in May or so that all are working quite well.