diff --git a/1-js/01-getting-started/4-devtools/article.md b/1-js/01-getting-started/4-devtools/article.md index c84d92704..50926d4f7 100644 --- a/1-js/01-getting-started/4-devtools/article.md +++ b/1-js/01-getting-started/4-devtools/article.md @@ -29,10 +29,15 @@ The exact look of developer tools depends on your version of Chrome. It changes - Here we can see the red-colored error message. In this case, the script contains an unknown "lalala" command. - On the right, there is a clickable link to the source `bug.html:12` with the line number where the error has occurred. -Below the error message, there is a blue `>` symbol. It marks a "command line" where we can type JavaScript commands. Press `key:Enter` to run them (`key:Shift+Enter` to input multi-line commands). +Below the error message, there is a blue `>` symbol. It marks a "command line" where we can type JavaScript commands. Press `key:Enter` to run them. Now we can see errors, and that's enough for a start. We'll come back to developer tools later and cover debugging more in-depth in the chapter . +```smart header="Multi-line input" +Usually, when we put a line of code into the console, and then press `key:Enter`, it executes. + +To insert multiple lines, press `key:Shift+Enter`. This way one can enter long fragments of JavaScript code. +``` ## Firefox, Edge, and others @@ -50,12 +55,6 @@ Open Preferences and go to the "Advanced" pane. There's a checkbox at the bottom Now `key:Cmd+Opt+C` can toggle the console. Also, note that the new top menu item named "Develop" has appeared. It has many commands and options. -```smart header="Multi-line input" -Usually, when we put a line of code into the console, and then press `key:Enter`, it executes. - -To insert multiple lines, press `key:Shift+Enter`. This way one can enter long fragments of JavaScript code. -``` - ## Summary - Developer tools allow us to see errors, run commands, examine variables, and much more. diff --git a/1-js/02-first-steps/05-types/article.md b/1-js/02-first-steps/05-types/article.md index 0da617373..9afc55b78 100644 --- a/1-js/02-first-steps/05-types/article.md +++ b/1-js/02-first-steps/05-types/article.md @@ -10,7 +10,7 @@ message = 123456; Programming languages that allow such things are called "dynamically typed", meaning that there are data types, but variables are not bound to any of them. -There are seven basic data types in JavaScript. Here, we'll cover them in general and in the next chapters we'll talk about each of them in detail. +There are eight basic data types in JavaScript. Here, we'll cover them in general and in the next chapters we'll talk about each of them in detail. ## A number @@ -180,6 +180,31 @@ All other types are called "primitive" because their values can contain only a s The `symbol` type is used to create unique identifiers for objects. We mention it here for completeness, but we'll study it after objects. +## BigInt + +In JavaScript, the Number type cannot represent integer values larger than 253-1. This limitation has forced many of us to use inefficient workarounds. BigInt is a new data type intended to fix just that. A BigInt is created by appending n to the end of an integer literal — 10n — or by calling the function BigInt(). + +```js run +const theBiggestInt = 9007199254740991n; + +const huge = BigInt(9007199254740991); + +alert(typeof biggestInt); // shows "bigint" + +alert(typeof huge); // shows "bigint" +``` +Bigint can mostly be used like number but there are some key differences +- Most math operatioons work on it normally +- It cannot be mixed and match with number while apllying binary operations it has to be coerced into each other but be careful it can lead to some precision losses +- The / operator also works as expected with whole numbers. However, since these are BigInts and not BigDecimals, this operation will round towards 0, which is to say, it will not return any fractional digits. + +To know more in detail about the java script newest addition in prmitive types please visit [MDN](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/BigInt) docs for it + + +```smart header="Compatability issues" +Right now it only compatible with firefox and chrome but is not supported in Safari. +``` + ## The typeof operator [#type-typeof] The `typeof` operator returns the type of the argument. It's useful when we want to process values of different types differently or just want to do a quick check. @@ -226,7 +251,7 @@ The last three lines may need additional explanation: ## Summary -There are 7 basic data types in JavaScript. +There are 8 basic data types in JavaScript. - `number` for numbers of any kind: integer or floating-point. - `string` for strings. A string may have one or more characters, there's no separate single-character type. @@ -235,6 +260,7 @@ There are 7 basic data types in JavaScript. - `undefined` for unassigned values -- a standalone type that has a single value `undefined`. - `object` for more complex data structures. - `symbol` for unique identifiers. +- `bigint` is for displaying numbers greater than 253-1 The `typeof` operator allows us to see which type is stored in a variable. diff --git a/1-js/02-first-steps/11-logical-operators/9-check-login/ifelse_task.svg b/1-js/02-first-steps/11-logical-operators/9-check-login/ifelse_task.svg index cbc8c7840..ca3e0aead 100644 --- a/1-js/02-first-steps/11-logical-operators/9-check-login/ifelse_task.svg +++ b/1-js/02-first-steps/11-logical-operators/9-check-login/ifelse_task.svg @@ -1 +1 @@ -BeginCanceledCanceledWelcome!I don't know youWrong passwordWho's there?Password?CancelCancelAdminTheMasterOtherOther \ No newline at end of file +BeginCanceledCanceledWelcome!I don't know youWrong passwordWho's there?Password?CancelCancelAdminTheMasterOtherOther \ No newline at end of file diff --git a/1-js/03-code-quality/01-debugging-chrome/chrome-open-sources.svg b/1-js/03-code-quality/01-debugging-chrome/chrome-open-sources.svg index 6f729fd3a..1f7d21288 100644 --- a/1-js/03-code-quality/01-debugging-chrome/chrome-open-sources.svg +++ b/1-js/03-code-quality/01-debugging-chrome/chrome-open-sources.svg @@ -1 +1 @@ -open sources \ No newline at end of file +open sources \ No newline at end of file diff --git a/1-js/03-code-quality/01-debugging-chrome/chrome-sources-breakpoint.svg b/1-js/03-code-quality/01-debugging-chrome/chrome-sources-breakpoint.svg index e9b28655f..6fb4332f1 100644 --- a/1-js/03-code-quality/01-debugging-chrome/chrome-sources-breakpoint.svg +++ b/1-js/03-code-quality/01-debugging-chrome/chrome-sources-breakpoint.svg @@ -1 +1 @@ -here's the listbreakpoints \ No newline at end of file +here's the listbreakpoints \ No newline at end of file diff --git a/1-js/03-code-quality/01-debugging-chrome/chrome-sources-debugger-trace-1.svg b/1-js/03-code-quality/01-debugging-chrome/chrome-sources-debugger-trace-1.svg index 61f08d25c..0d5bde9c4 100644 --- a/1-js/03-code-quality/01-debugging-chrome/chrome-sources-debugger-trace-1.svg +++ b/1-js/03-code-quality/01-debugging-chrome/chrome-sources-debugger-trace-1.svg @@ -1 +1 @@ -nested calls \ No newline at end of file +nested calls \ No newline at end of file diff --git a/1-js/03-code-quality/02-coding-style/code-style.svg b/1-js/03-code-quality/02-coding-style/code-style.svg index e8e374048..bd62691c6 100644 --- a/1-js/03-code-quality/02-coding-style/code-style.svg +++ b/1-js/03-code-quality/02-coding-style/code-style.svg @@ -1 +1 @@ -2No space between the function name and parentheses between the parentheses and the parameterIndentation 2 spacesA space after for/if/while…} else { without a line breakSpaces around a nested callAn empty line between logical blocksLines are not very longA semicolon ; is mandatorySpaces around operatorsCurly brace { on the same line, after a spaceA space between parametersA space between parameters \ No newline at end of file +2No space between the function name and parentheses between the parentheses and the parameterIndentation 2 spacesA space after for/if/while…} else { without a line breakSpaces around a nested callAn empty line between logical blocksLines are not very longA semicolon ; is mandatorySpaces around operatorsCurly brace { on the same line, after a spaceA space between parametersA space between parameters \ No newline at end of file diff --git a/1-js/03-code-quality/06-polyfills/article.md b/1-js/03-code-quality/06-polyfills/article.md index b399fd428..75db49d2f 100644 --- a/1-js/03-code-quality/06-polyfills/article.md +++ b/1-js/03-code-quality/06-polyfills/article.md @@ -19,7 +19,7 @@ Here Babel comes to the rescue. Actually, there are two parts in Babel: -1. First, the transpiler program, which rewrites the code. The developer runs it on their own computer. It rewrites the code into the older standard. And then the code is delivered to the website for users. Modern project build systems like [webpack](http://webpack.github.io/) provide means to run transpiler automatically on every code change, so that very easy to integrate into development process. +1. First, the transpiler program, which rewrites the code. The developer runs it on their own computer. It rewrites the code into the older standard. And then the code is delivered to the website for users. Modern project build systems like [webpack](http://webpack.github.io/) provide means to run transpiler automatically on every code change, so that it's very easy to integrate into development process. 2. Second, the polyfill. diff --git a/1-js/04-object-basics/02-garbage-collection/family-delete-refs.svg b/1-js/04-object-basics/02-garbage-collection/family-delete-refs.svg index 133b3908d..2ae1f664c 100644 --- a/1-js/04-object-basics/02-garbage-collection/family-delete-refs.svg +++ b/1-js/04-object-basics/02-garbage-collection/family-delete-refs.svg @@ -1 +1 @@ -<global variable>ObjectObjectwifefamilyname: "John"name: "Ann"motherObjectfatherhusband \ No newline at end of file +<global variable>ObjectObjectwifefamilyname: "John"name: "Ann"motherObjectfatherhusband \ No newline at end of file diff --git a/1-js/04-object-basics/02-garbage-collection/family-no-family.svg b/1-js/04-object-basics/02-garbage-collection/family-no-family.svg index 8ba3b9f9f..655d1982e 100644 --- a/1-js/04-object-basics/02-garbage-collection/family-no-family.svg +++ b/1-js/04-object-basics/02-garbage-collection/family-no-family.svg @@ -1 +1 @@ -<global>ObjectObjectfatherwifename: "John"name: "Ann"motherObjecthusbandfamily: null \ No newline at end of file +<global>ObjectObjectfatherwifename: "John"name: "Ann"motherObjecthusbandfamily: null \ No newline at end of file diff --git a/1-js/04-object-basics/02-garbage-collection/family-no-father.svg b/1-js/04-object-basics/02-garbage-collection/family-no-father.svg index 59f0b2afc..b76c868e0 100644 --- a/1-js/04-object-basics/02-garbage-collection/family-no-father.svg +++ b/1-js/04-object-basics/02-garbage-collection/family-no-father.svg @@ -1 +1 @@ -ObjectObjectwifefamilyname: "John"name: "Ann"motherObject<global> \ No newline at end of file +ObjectObjectwifefamilyname: "John"name: "Ann"motherObject<global> \ No newline at end of file diff --git a/1-js/04-object-basics/02-garbage-collection/family.svg b/1-js/04-object-basics/02-garbage-collection/family.svg index 8fbbc35ea..bec2f4ddc 100644 --- a/1-js/04-object-basics/02-garbage-collection/family.svg +++ b/1-js/04-object-basics/02-garbage-collection/family.svg @@ -1 +1 @@ -ObjectObjectfatherwifefamilyname: "John"name: "Ann"motherObjecthusband<global variable> \ No newline at end of file +ObjectObjectfatherwifefamilyname: "John"name: "Ann"motherObjecthusband<global variable> \ No newline at end of file diff --git a/1-js/04-object-basics/02-garbage-collection/garbage-collection-1.svg b/1-js/04-object-basics/02-garbage-collection/garbage-collection-1.svg index 125031ee4..2563c8185 100644 --- a/1-js/04-object-basics/02-garbage-collection/garbage-collection-1.svg +++ b/1-js/04-object-basics/02-garbage-collection/garbage-collection-1.svg @@ -1 +1 @@ -<global> \ No newline at end of file +<global> \ No newline at end of file diff --git a/1-js/04-object-basics/02-garbage-collection/garbage-collection-2.svg b/1-js/04-object-basics/02-garbage-collection/garbage-collection-2.svg index b4f1a0870..acd5025e9 100644 --- a/1-js/04-object-basics/02-garbage-collection/garbage-collection-2.svg +++ b/1-js/04-object-basics/02-garbage-collection/garbage-collection-2.svg @@ -1 +1 @@ -<global> \ No newline at end of file +<global> \ No newline at end of file diff --git a/1-js/04-object-basics/02-garbage-collection/garbage-collection-3.svg b/1-js/04-object-basics/02-garbage-collection/garbage-collection-3.svg index 7477c4ba7..4421ec784 100644 --- a/1-js/04-object-basics/02-garbage-collection/garbage-collection-3.svg +++ b/1-js/04-object-basics/02-garbage-collection/garbage-collection-3.svg @@ -1 +1 @@ -<global> \ No newline at end of file +<global> \ No newline at end of file diff --git a/1-js/04-object-basics/02-garbage-collection/garbage-collection-4.svg b/1-js/04-object-basics/02-garbage-collection/garbage-collection-4.svg index 6b13c1dc0..74adc8135 100644 --- a/1-js/04-object-basics/02-garbage-collection/garbage-collection-4.svg +++ b/1-js/04-object-basics/02-garbage-collection/garbage-collection-4.svg @@ -1 +1 @@ -<global> \ No newline at end of file +<global> \ No newline at end of file diff --git a/1-js/04-object-basics/02-garbage-collection/garbage-collection-5.svg b/1-js/04-object-basics/02-garbage-collection/garbage-collection-5.svg index 5cb54dc28..abb127ab2 100644 --- a/1-js/04-object-basics/02-garbage-collection/garbage-collection-5.svg +++ b/1-js/04-object-basics/02-garbage-collection/garbage-collection-5.svg @@ -1 +1 @@ -<global>unreachables \ No newline at end of file +<global>unreachables \ No newline at end of file diff --git a/1-js/05-data-types/11-date/8-format-date-relative/solution.md b/1-js/05-data-types/11-date/8-format-date-relative/solution.md index 2507c840c..718618528 100644 --- a/1-js/05-data-types/11-date/8-format-date-relative/solution.md +++ b/1-js/05-data-types/11-date/8-format-date-relative/solution.md @@ -62,6 +62,8 @@ function formatDate(date) { year = year.toString().slice(-2); month = month < 10 ? '0' + month : month; dayOfMonth = dayOfMonth < 10 ? '0' + dayOfMonth : dayOfMonth; + hour = hour < 10 ? '0' + hour : hour; + minutes = minutes < 10 ? '0' + minutes : minutes; if (diffSec < 1) { return 'right now'; diff --git a/1-js/06-advanced-functions/01-recursion/03-fibonacci-numbers/fibonacci-recursion-tree.svg b/1-js/06-advanced-functions/01-recursion/03-fibonacci-numbers/fibonacci-recursion-tree.svg index 28f0c9b13..59e6a52c4 100644 --- a/1-js/06-advanced-functions/01-recursion/03-fibonacci-numbers/fibonacci-recursion-tree.svg +++ b/1-js/06-advanced-functions/01-recursion/03-fibonacci-numbers/fibonacci-recursion-tree.svg @@ -1 +1 @@ -fib ( 5 )fib(4)fib(3)fib(3)fib(2)fib(0)fib(1)fib(1)fib(2)fib(0)fib(1)fib(1)fib(2)fib(0)fib(1) \ No newline at end of file +fib ( 5 )fib(4)fib(3)fib(3)fib(2)fib(0)fib(1)fib(1)fib(2)fib(0)fib(1)fib(1)fib(2)fib(0)fib(1) \ No newline at end of file diff --git a/1-js/06-advanced-functions/01-recursion/linked-list-remove-1.svg b/1-js/06-advanced-functions/01-recursion/linked-list-remove-1.svg index 346c436a3..edec23912 100644 --- a/1-js/06-advanced-functions/01-recursion/linked-list-remove-1.svg +++ b/1-js/06-advanced-functions/01-recursion/linked-list-remove-1.svg @@ -1 +1 @@ -value"new item"nextvalue1nextvalue2nextvalue3nextvalue4nextnulllist \ No newline at end of file +value"new item"nextvalue1nextvalue2nextvalue3nextvalue4nextnulllist \ No newline at end of file diff --git a/1-js/06-advanced-functions/01-recursion/recursion-pow.svg b/1-js/06-advanced-functions/01-recursion/recursion-pow.svg index 910b2aa50..8bd4a43fe 100644 --- a/1-js/06-advanced-functions/01-recursion/recursion-pow.svg +++ b/1-js/06-advanced-functions/01-recursion/recursion-pow.svg @@ -1 +1 @@ -pow(x,n)xx * pow(x, n-1)n == 1 ?YesNorecursive call until n==1 \ No newline at end of file +pow(x,n)xx * pow(x, n-1)n == 1 ?YesNorecursive call until n==1 \ No newline at end of file diff --git a/1-js/06-advanced-functions/01-recursion/recursive-salaries.svg b/1-js/06-advanced-functions/01-recursion/recursive-salaries.svg index 9a3296655..f47f0668b 100644 --- a/1-js/06-advanced-functions/01-recursion/recursive-salaries.svg +++ b/1-js/06-advanced-functions/01-recursion/recursive-salaries.svg @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/1-js/06-advanced-functions/03-closure/8-make-army/task.md b/1-js/06-advanced-functions/03-closure/8-make-army/task.md index ede8fd045..93e64f2d0 100644 --- a/1-js/06-advanced-functions/03-closure/8-make-army/task.md +++ b/1-js/06-advanced-functions/03-closure/8-make-army/task.md @@ -31,5 +31,5 @@ army[5](); // and number 5 also outputs 10... // ... all shooters show 10 instead of their 0, 1, 2, 3... ``` -Why all shooters show the same? Fix the code so that they work as intended. +Why do all of the shooters show the same value? Fix the code so that they work as intended. diff --git a/1-js/06-advanced-functions/03-closure/lexenv-if.svg b/1-js/06-advanced-functions/03-closure/lexenv-if.svg index 48dd7d1bf..b644fe154 100644 --- a/1-js/06-advanced-functions/03-closure/lexenv-if.svg +++ b/1-js/06-advanced-functions/03-closure/lexenv-if.svg @@ -1 +1 @@ -phrase: "Hello"outerouternulluser: "John" \ No newline at end of file +phrase: "Hello"outerouternulluser: "John" \ No newline at end of file diff --git a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-2.svg b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-2.svg index f70fb41f0..66e5200f8 100644 --- a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-2.svg +++ b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-2.svg @@ -1 +1 @@ -makeCounter: functioncounter: undefinedcount: 0outerouternullglobal LexicalEnvironmentLexicalEnvironment of makeCounter() call \ No newline at end of file +makeCounter: functioncounter: undefinedcount: 0outerouternullglobal LexicalEnvironmentLexicalEnvironment of makeCounter() call \ No newline at end of file diff --git a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-3.svg b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-3.svg index 9a3298ca3..28c526c4f 100644 --- a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-3.svg +++ b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-3.svg @@ -1 +1 @@ -makeCounter: functioncounter: undefinedcount: 0outerouternull[[Environment]] \ No newline at end of file +makeCounter: functioncounter: undefinedcount: 0outerouternull[[Environment]] \ No newline at end of file diff --git a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-4.svg b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-4.svg index 02d8a93fb..acc1e8fb9 100644 --- a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-4.svg +++ b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-4.svg @@ -1 +1 @@ -makeCounter: functioncounter: functioncount: 0outerouternull[[Environment]] \ No newline at end of file +makeCounter: functioncounter: functioncount: 0outerouternull[[Environment]] \ No newline at end of file diff --git a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-5.svg b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-5.svg index 6c8f66495..cf91c331d 100644 --- a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-5.svg +++ b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-5.svg @@ -1 +1 @@ -makeCounter: functioncounter: functioncount: 0<empty>outerouterouternull[[Environment]] \ No newline at end of file +makeCounter: functioncounter: functioncount: 0<empty>outerouterouternull[[Environment]] \ No newline at end of file diff --git a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-6.svg b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-6.svg index 3b0ac9d0c..def542ceb 100644 --- a/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-6.svg +++ b/1-js/06-advanced-functions/03-closure/lexenv-nested-makecounter-6.svg @@ -1 +1 @@ -makeCounter: functioncounter: functioncount: 1outerouternull[[Environment]]modified here \ No newline at end of file +makeCounter: functioncounter: functioncount: 1outerouternull[[Environment]]modified here \ No newline at end of file diff --git a/1-js/06-advanced-functions/03-closure/lexical-environment-simple-lookup.svg b/1-js/06-advanced-functions/03-closure/lexical-environment-simple-lookup.svg index 40e2b92ad..1ad0ab6c3 100644 --- a/1-js/06-advanced-functions/03-closure/lexical-environment-simple-lookup.svg +++ b/1-js/06-advanced-functions/03-closure/lexical-environment-simple-lookup.svg @@ -1 +1 @@ -say: function phrase: "Hello"name: "John"outerouternull \ No newline at end of file +say: function phrase: "Hello"name: "John"outerouternull \ No newline at end of file diff --git a/1-js/06-advanced-functions/03-closure/lexical-environment-simple.svg b/1-js/06-advanced-functions/03-closure/lexical-environment-simple.svg index a962f0e5f..179ce75d2 100644 --- a/1-js/06-advanced-functions/03-closure/lexical-environment-simple.svg +++ b/1-js/06-advanced-functions/03-closure/lexical-environment-simple.svg @@ -1 +1 @@ -say: function phrase: "Hello"name: "John"outerouternullLexicalEnvironment for the call \ No newline at end of file +say: function phrase: "Hello"name: "John"outerouternullLexicalEnvironment for the call \ No newline at end of file diff --git a/1-js/06-advanced-functions/03-closure/lexical-search-order.svg b/1-js/06-advanced-functions/03-closure/lexical-search-order.svg index 44db4b0c1..89a9d110a 100644 --- a/1-js/06-advanced-functions/03-closure/lexical-search-order.svg +++ b/1-js/06-advanced-functions/03-closure/lexical-search-order.svg @@ -1 +1 @@ -123 \ No newline at end of file +123 \ No newline at end of file diff --git a/1-js/06-advanced-functions/09-call-apply-decorators/article.md b/1-js/06-advanced-functions/09-call-apply-decorators/article.md index 373500e13..7d43c0be3 100644 --- a/1-js/06-advanced-functions/09-call-apply-decorators/article.md +++ b/1-js/06-advanced-functions/09-call-apply-decorators/article.md @@ -149,8 +149,8 @@ let user = { name: "John" }; let admin = { name: "Admin" }; // use call to pass different objects as "this" -sayHi.call( user ); // this = John -sayHi.call( admin ); // this = Admin +sayHi.call( user ); // John +sayHi.call( admin ); // Admin ``` And here we use `call` to call `say` with the given context and phrase: diff --git a/1-js/06-advanced-functions/10-bind/article.md b/1-js/06-advanced-functions/10-bind/article.md index 16a50942d..ff60e559f 100644 --- a/1-js/06-advanced-functions/10-bind/article.md +++ b/1-js/06-advanced-functions/10-bind/article.md @@ -279,7 +279,7 @@ What if we'd like to fix some arguments, but not the context `this`? For example The native `bind` does not allow that. We can't just omit the context and jump to arguments. -Fortunately, a helper function `partial` for binding only arguments can be easily implemented. +Fortunately, a function `partial` for binding only arguments can be easily implemented. Like this: diff --git a/1-js/07-object-properties/02-property-accessors/article.md b/1-js/07-object-properties/02-property-accessors/article.md index 726529c5b..52c152811 100644 --- a/1-js/07-object-properties/02-property-accessors/article.md +++ b/1-js/07-object-properties/02-property-accessors/article.md @@ -94,11 +94,7 @@ alert(user.name); // Alice alert(user.surname); // Cooper ``` -As the result, we have a "virtual" property `fullName`. It is readable and writable, but in fact does not exist. - -```smart header="No way to handle `delete`" -There's no similar method to handle deletion of an accessor property. Only getter/setter methods may exist. -``` +As the result, we have a "virtual" property `fullName`. It is readable and writable. ## Accessor descriptors diff --git a/1-js/08-prototypes/03-native-prototypes/native-prototypes-classes.svg b/1-js/08-prototypes/03-native-prototypes/native-prototypes-classes.svg index caa5ec04b..36cc81cd9 100644 --- a/1-js/08-prototypes/03-native-prototypes/native-prototypes-classes.svg +++ b/1-js/08-prototypes/03-native-prototypes/native-prototypes-classes.svg @@ -1 +1 @@ -toString: function other object methodsObject.prototypenullslice: function other array methods[[Prototype]][[Prototype]][[Prototype]][[Prototype]][[Prototype]][[Prototype]][[Prototype]]Array.prototypecall: function other function methodsFunction.prototypetoFixed: function other number methodsNumber.prototype[1, 2, 3]function f(args) { ... }5 \ No newline at end of file +toString: function other object methodsObject.prototypenullslice: function other array methods[[Prototype]][[Prototype]][[Prototype]][[Prototype]][[Prototype]][[Prototype]][[Prototype]]Array.prototypecall: function other function methodsFunction.prototypetoFixed: function other number methodsNumber.prototype[1, 2, 3]function f(args) { ... }5 \ No newline at end of file diff --git a/1-js/09-classes/02-class-inheritance/animal-rabbit-extends.svg b/1-js/09-classes/02-class-inheritance/animal-rabbit-extends.svg index 2f994f7b7..3471904ab 100644 --- a/1-js/09-classes/02-class-inheritance/animal-rabbit-extends.svg +++ b/1-js/09-classes/02-class-inheritance/animal-rabbit-extends.svg @@ -1 +1 @@ -constructor: Animal run: function stop: functionAnimal.prototypeconstructor: Rabbit hide: functionRabbit.prototypeAnimalRabbitnew Rabbit[[Prototype]][[Prototype]]prototypeprototypename: "White Rabbit"constructorconstructorextends \ No newline at end of file +constructor: Animal run: function stop: functionAnimal.prototypeconstructor: Rabbit hide: functionRabbit.prototypeAnimalRabbitnew Rabbit[[Prototype]][[Prototype]]prototypeprototypename: "White Rabbit"constructorconstructorextends \ No newline at end of file diff --git a/1-js/09-classes/02-class-inheritance/super-homeobject-wrong.svg b/1-js/09-classes/02-class-inheritance/super-homeobject-wrong.svg index 8ad09f484..f13d441c9 100644 --- a/1-js/09-classes/02-class-inheritance/super-homeobject-wrong.svg +++ b/1-js/09-classes/02-class-inheritance/super-homeobject-wrong.svg @@ -1 +1 @@ -sayHiplantsayHitreesayHianimalrabbit[[HomeObject]]sayHi \ No newline at end of file +sayHiplantsayHitreesayHianimalrabbit[[HomeObject]]sayHi \ No newline at end of file diff --git a/1-js/09-classes/03-static-properties-methods/article.md b/1-js/09-classes/03-static-properties-methods/article.md index dd09a0262..ab08f2ded 100644 --- a/1-js/09-classes/03-static-properties-methods/article.md +++ b/1-js/09-classes/03-static-properties-methods/article.md @@ -20,7 +20,7 @@ User.staticMethod(); // true That actually does the same as assigning it as a property directly: ```js run -class User() { } +class User { } User.staticMethod = function() { alert(this === User); diff --git a/1-js/09-classes/06-instanceof/instanceof.svg b/1-js/09-classes/06-instanceof/instanceof.svg index 8b63f2070..78bff9f12 100644 --- a/1-js/09-classes/06-instanceof/instanceof.svg +++ b/1-js/09-classes/06-instanceof/instanceof.svg @@ -1 +1 @@ -Animal.prototypeObject.prototypeRabbit.prototype[[Prototype]]rabbit[[Prototype]][[Prototype]]null[[Prototype]]= Animal.prototype? \ No newline at end of file +Animal.prototypeObject.prototypeRabbit.prototype[[Prototype]]rabbit[[Prototype]][[Prototype]]null[[Prototype]]= Animal.prototype? \ No newline at end of file diff --git a/1-js/10-error-handling/1-try-catch/try-catch-flow.svg b/1-js/10-error-handling/1-try-catch/try-catch-flow.svg index ab17dcda0..ac816e356 100644 --- a/1-js/10-error-handling/1-try-catch/try-catch-flow.svg +++ b/1-js/10-error-handling/1-try-catch/try-catch-flow.svg @@ -1 +1 @@ -BeginNo ErrorsAn error occured in the codeIgnore catch blockIgnore the rest of tryExecute catch blocktry { }// code... \ No newline at end of file +BeginNo ErrorsAn error occured in the codeIgnore catch blockIgnore the rest of tryExecute catch blocktry { }// code... \ No newline at end of file diff --git a/1-js/11-async/02-promise-basics/article.md b/1-js/11-async/02-promise-basics/article.md index e3128954a..f8de3055a 100644 --- a/1-js/11-async/02-promise-basics/article.md +++ b/1-js/11-async/02-promise-basics/article.md @@ -205,7 +205,7 @@ let promise = new Promise((resolve, reject) => { }); *!* -// .catch(f) is the same as promise.then(null, f) +// .catch(f) is the same as .then(null, f) promise.catch(alert); // shows "Error: Whoops!" after 1 second */!* ``` diff --git a/1-js/11-async/02-promise-basics/promise-resolve-reject.svg b/1-js/11-async/02-promise-basics/promise-resolve-reject.svg index 7b164166b..428dfd845 100644 --- a/1-js/11-async/02-promise-basics/promise-resolve-reject.svg +++ b/1-js/11-async/02-promise-basics/promise-resolve-reject.svg @@ -1 +1 @@ -new Promise(executor)state: "pending" result: undefinedresolve(value)reject(error)state: "fulfilled" result: valuestate: "rejected" result: error \ No newline at end of file +new Promise(executor)state: "pending" result: undefinedresolve(value)reject(error)state: "fulfilled" result: valuestate: "rejected" result: error \ No newline at end of file diff --git a/1-js/11-async/03-promise-chaining/promise-handler-variants.svg b/1-js/11-async/03-promise-chaining/promise-handler-variants.svg index 176354dd5..fe1ae5684 100644 --- a/1-js/11-async/03-promise-chaining/promise-handler-variants.svg +++ b/1-js/11-async/03-promise-chaining/promise-handler-variants.svg @@ -1 +1 @@ -return valuereturn promisethrow errorstate: "fulfilled" result: valuestate: "rejected" result: error...with the result of the new promise...state: "pending" result: undefinedthe call of .then(handler) always returns a promise:if handler ends with…that promise settles with: \ No newline at end of file +return valuereturn promisethrow errorstate: "fulfilled" result: valuestate: "rejected" result: error...with the result of the new promise...state: "pending" result: undefinedthe call of .then(handler) always returns a promise:if handler ends with…that promise settles with: \ No newline at end of file diff --git a/1-js/11-async/03-promise-chaining/promise-then-many.svg b/1-js/11-async/03-promise-chaining/promise-then-many.svg index ce21abadc..ce8dc1c0c 100644 --- a/1-js/11-async/03-promise-chaining/promise-then-many.svg +++ b/1-js/11-async/03-promise-chaining/promise-then-many.svg @@ -1 +1 @@ -.thennew Promiseresolve(1).then.then \ No newline at end of file +.thennew Promiseresolve(1).then.then \ No newline at end of file diff --git a/1-js/11-async/04-promise-error-handling/promise-then-many.svg b/1-js/11-async/04-promise-error-handling/promise-then-many.svg index ce21abadc..ce8dc1c0c 100644 --- a/1-js/11-async/04-promise-error-handling/promise-then-many.svg +++ b/1-js/11-async/04-promise-error-handling/promise-then-many.svg @@ -1 +1 @@ -.thennew Promiseresolve(1).then.then \ No newline at end of file +.thennew Promiseresolve(1).then.then \ No newline at end of file diff --git a/1-js/12-generators-iterators/1-generators/genYield2-2.svg b/1-js/12-generators-iterators/1-generators/genYield2-2.svg index ed99afd3d..41f163364 100644 --- a/1-js/12-generators-iterators/1-generators/genYield2-2.svg +++ b/1-js/12-generators-iterators/1-generators/genYield2-2.svg @@ -1 +1 @@ -"2 + 2 = ?""3 * 3 = ?". next ( 4 ). next ( 9 )GeneratorCalling code \ No newline at end of file +"2 + 2 = ?""3 * 3 = ?". next ( 4 ). next ( 9 )GeneratorCalling code \ No newline at end of file diff --git a/1-js/13-modules/02-import-export/article.md b/1-js/13-modules/02-import-export/article.md index f5465831d..cb45b1fdf 100644 --- a/1-js/13-modules/02-import-export/article.md +++ b/1-js/13-modules/02-import-export/article.md @@ -26,7 +26,7 @@ For instance, here all exports are valid: ``` ````smart header="No semicolons after export class/function" -Please note that `export` before a class or a function does not make it a [function expression](info:function-expressions-arrows). It's still a function declaration, albeit exported. +Please note that `export` before a class or a function does not make it a [function expression](info:function-expressions). It's still a function declaration, albeit exported. Most JavaScript style guides don't recommend semicolons after function and class declarations. diff --git a/2-ui/1-document/01-browser-environment/windowObjects.svg b/2-ui/1-document/01-browser-environment/windowObjects.svg index 59a10a441..d1b280ee8 100644 --- a/2-ui/1-document/01-browser-environment/windowObjects.svg +++ b/2-ui/1-document/01-browser-environment/windowObjects.svg @@ -1 +1 @@ -windowdocumentObjectnavigatorscreenlocationframeshistoryArrayFunctionXMLHttpRequestBOMJavaScriptDOM…… \ No newline at end of file +windowdocumentObjectnavigatorscreenlocationframeshistoryArrayFunctionXMLHttpRequestBOMJavaScriptDOM…… \ No newline at end of file diff --git a/2-ui/1-document/03-dom-navigation/dom-links-elements.svg b/2-ui/1-document/03-dom-navigation/dom-links-elements.svg index 190285533..a9ce1fd8d 100644 --- a/2-ui/1-document/03-dom-navigation/dom-links-elements.svg +++ b/2-ui/1-document/03-dom-navigation/dom-links-elements.svg @@ -1 +1 @@ -document.documentElement <HTML>document.body (if inside body)parent Element<DIV>next Element Siblingprevious Element Siblingchildrenfirst Element Child last Element Child \ No newline at end of file +document.documentElement <HTML>document.body (if inside body)parent Element<DIV>next Element Siblingprevious Element Siblingchildrenfirst Element Child last Element Child \ No newline at end of file diff --git a/2-ui/1-document/03-dom-navigation/dom-links.svg b/2-ui/1-document/03-dom-navigation/dom-links.svg index df252deb9..126530e93 100644 --- a/2-ui/1-document/03-dom-navigation/dom-links.svg +++ b/2-ui/1-document/03-dom-navigation/dom-links.svg @@ -1 +1 @@ -documentdocument.documentElement <HTML>document.body (if inside body)parentNode<DIV>nextSiblingpreviousSiblingchildNodesfirstChild lastChild \ No newline at end of file +documentdocument.documentElement <HTML>document.body (if inside body)parentNode<DIV>nextSiblingpreviousSiblingchildNodesfirstChild lastChild \ No newline at end of file diff --git a/2-ui/1-document/05-basic-dom-node-properties/dom-class-hierarchy.svg b/2-ui/1-document/05-basic-dom-node-properties/dom-class-hierarchy.svg index f8a9f8ffc..3b8444a20 100644 --- a/2-ui/1-document/05-basic-dom-node-properties/dom-class-hierarchy.svg +++ b/2-ui/1-document/05-basic-dom-node-properties/dom-class-hierarchy.svg @@ -1 +1 @@ -EventTargetNode Element HTMLElement HTMLBodyElement HTMLInputElement HTMLAnchorElement Text Comment SVGElement <div> Text </div><input type="…"><body><a href="…">< div > Text </ div ><!--comment--> \ No newline at end of file +EventTargetNode Element HTMLElement HTMLBodyElement HTMLInputElement HTMLAnchorElement Text Comment SVGElement <div> Text </div><input type="…"><body><a href="…">< div > Text </ div ><!--comment--> \ No newline at end of file diff --git a/2-ui/1-document/07-modifying-document/article.md b/2-ui/1-document/07-modifying-document/article.md index b624da47c..c4796a1d4 100644 --- a/2-ui/1-document/07-modifying-document/article.md +++ b/2-ui/1-document/07-modifying-document/article.md @@ -540,7 +540,7 @@ So if we need to add a lot of text into HTML dynamically, and we're at page load - `"beforeend"` -- insert `html` into `elem`, at the end, - `"afterend"` -- insert `html` right after `elem`. - Also there are also similar methods, `elem.insertAdjacentText` and `elem.insertAdjacentElement`, that insert text strings and elements, but they are rarely used. + Also there are similar methods, `elem.insertAdjacentText` and `elem.insertAdjacentElement`, that insert text strings and elements, but they are rarely used. - To append HTML to the page before it has finished loading: - `document.write(html)` diff --git a/2-ui/1-document/07-modifying-document/before-prepend-append-after.svg b/2-ui/1-document/07-modifying-document/before-prepend-append-after.svg index 1811adea7..6e1fb4874 100644 --- a/2-ui/1-document/07-modifying-document/before-prepend-append-after.svg +++ b/2-ui/1-document/07-modifying-document/before-prepend-append-after.svg @@ -1 +1 @@ -ol.afterol.appendol.prependol.before(…nodes or strings) \ No newline at end of file +ol.afterol.appendol.prependol.before(…nodes or strings) \ No newline at end of file diff --git a/2-ui/1-document/07-modifying-document/insert-adjacent.svg b/2-ui/1-document/07-modifying-document/insert-adjacent.svg index 4b247fd72..64beee037 100644 --- a/2-ui/1-document/07-modifying-document/insert-adjacent.svg +++ b/2-ui/1-document/07-modifying-document/insert-adjacent.svg @@ -1 +1 @@ -ol.insertAdjacentHTML(*, html)afterendbeforeendafterbeginbeforebegin \ No newline at end of file +ol.insertAdjacentHTML(*, html)afterendbeforeendafterbeginbeforebegin \ No newline at end of file diff --git a/2-ui/1-document/09-size-and-scroll/4-put-ball-in-center/field.svg b/2-ui/1-document/09-size-and-scroll/4-put-ball-in-center/field.svg index f5562f97a..ca8bbc3bd 100644 --- a/2-ui/1-document/09-size-and-scroll/4-put-ball-in-center/field.svg +++ b/2-ui/1-document/09-size-and-scroll/4-put-ball-in-center/field.svg @@ -1 +1 @@ -(0,0)clientWidth \ No newline at end of file +(0,0)clientWidth \ No newline at end of file diff --git a/2-ui/1-document/09-size-and-scroll/metric-all.svg b/2-ui/1-document/09-size-and-scroll/metric-all.svg index 273b38528..3c77f09ac 100644 --- a/2-ui/1-document/09-size-and-scroll/metric-all.svg +++ b/2-ui/1-document/09-size-and-scroll/metric-all.svg @@ -1 +1 @@ -Introduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at Netscape and first appeared in that company’s Navigator 2.0 browser. It has appeared in all subsequent browsers from Netscape and in all browsers from Microsoft starting with Internet Explorer 3.0. The development of this Standard started in November 1996. The first edition of this Ecma Standard was adopted by the Ecma General Assembly of June 1997. That Ecma Standard was submitted to ISO/ IEC JTC 1 for adoption under the fast-track procedure, and approved as international standard ISO/IEC 16262, in April 1998. The Ecma General Assembly of June 1998 approved the second edition of ECMA-262 to keep it fully aligned with ISO/IEC 16262. Changes between the first and the second edition are editorial in nature.scrollHeightoffsetHeightscrollTopclientHeightoffsetTopclientLeftclientWidthclientTopoffsetLeftoffsetWidth \ No newline at end of file +Introduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at Netscape and first appeared in that company’s Navigator 2.0 browser. It has appeared in all subsequent browsers from Netscape and in all browsers from Microsoft starting with Internet Explorer 3.0. The development of this Standard started in November 1996. The first edition of this Ecma Standard was adopted by the Ecma General Assembly of June 1997. That Ecma Standard was submitted to ISO/ IEC JTC 1 for adoption under the fast-track procedure, and approved as international standard ISO/IEC 16262, in April 1998. The Ecma General Assembly of June 1998 approved the second edition of ECMA-262 to keep it fully aligned with ISO/IEC 16262. Changes between the first and the second edition are editorial in nature.scrollHeightoffsetHeightscrollTopclientHeightoffsetTopclientLeftclientWidthclientTopoffsetLeftoffsetWidth \ No newline at end of file diff --git a/2-ui/1-document/10-size-and-scroll-window/article.md b/2-ui/1-document/10-size-and-scroll-window/article.md index 7631676d6..10898dbf7 100644 --- a/2-ui/1-document/10-size-and-scroll-window/article.md +++ b/2-ui/1-document/10-size-and-scroll-window/article.md @@ -40,7 +40,7 @@ In modern HTML we should always write `DOCTYPE`. ## Width/height of the document -Theoretically, as the root document element is `documentElement.clientWidth/Height`, and it encloses all the content, we could measure document full size as `documentElement.scrollWidth/scrollHeight`. +Theoretically, as the root document element is `document.documentElement`, and it encloses all the content, we could measure document full size as `document.documentElement.scrollWidth/scrollHeight`. But on that element, for the whole page, these properties do not work as intended. In Chrome/Safari/Opera if there's no scroll, then `documentElement.scrollHeight` may be even less than `documentElement.clientHeight`! Sounds like a nonsense, weird, right? @@ -62,7 +62,7 @@ Why so? Better don't ask. These inconsistencies come from ancient times, not a " DOM elements have their current scroll state in `elem.scrollLeft/scrollTop`. -For document scroll `document.documentElement.scrollLeft/Top` works in most browsers, except oldler WebKit-based ones, like Safari (bug [5991](https://bugs.webkit.org/show_bug.cgi?id=5991)), where we should use `document.body` instead of `document.documentElement`. +For document scroll `document.documentElement.scrollLeft/Top` works in most browsers, except older WebKit-based ones, like Safari (bug [5991](https://bugs.webkit.org/show_bug.cgi?id=5991)), where we should use `document.body` instead of `document.documentElement`. Luckily, we don't have to remember these peculiarities at all, because the scroll is available in the special properties `window.pageXOffset/pageYOffset`: diff --git a/2-ui/1-document/11-coordinates/article.md b/2-ui/1-document/11-coordinates/article.md index 939ba9141..0521043c9 100644 --- a/2-ui/1-document/11-coordinates/article.md +++ b/2-ui/1-document/11-coordinates/article.md @@ -75,17 +75,17 @@ Please note: ```smart header="Why derived properties are needed? Why does `top/left` exist if there's `x/y`?" Mathematically, a rectangle is uniquely defined with its starting point `(x,y)` and the direction vector `(width,height)`. So the additional derived properties are for convenience. -Technically it's possible for `width/height` to be negative, that allows for "directed" rectangle, e.g. to represent mouse selection with properly marked start and end. +Technically it's possible for `width/height` to be negative, that allows for "directed" rectangle, e.g. to represent mouse selection with properly marked start and end. + +Negative `width/height` values mean that the rectangle starts at its bottom-right corner and then "grows" left-upwards. Here's a rectangle with negative `width` and `height` (e.g. `width=-200`, `height=-100`): ![](coordinates-negative.svg) -The rectangle starts at its bottom-right corner and then spans left/up, as negative `width/height` lead it backwards by coordinates. - -As you can see, `left/top` are not `x/y` here. So these are actually not duplicates. Their formula can be adjusted to cover negative `width/height`, that's simple enough, but rarely needed, as the result of `elem.getBoundingClientRect()` always has positive width/height. +As you can see, `left/top` do not equal `x/y` in such case. -Here we mention negative `width/height` only for you to understand why these seemingly duplicate properties are not actually duplicates. +In practice though, `elem.getBoundingClientRect()` always returns positive width/height, here we mention negative `width/height` only for you to understand why these seemingly duplicate properties are not actually duplicates. ``` ```warn header="Internet Explorer and Edge: no support for `x/y`" diff --git a/2-ui/1-document/11-coordinates/coordinates-negative.svg b/2-ui/1-document/11-coordinates/coordinates-negative.svg index 347c96d8a..3d3380110 100644 --- a/2-ui/1-document/11-coordinates/coordinates-negative.svg +++ b/2-ui/1-document/11-coordinates/coordinates-negative.svg @@ -1 +1 @@ -bottom(x,y)(x,y)leftrightIntroduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at top(width,height) \ No newline at end of file +bottom(x,y)(x,y)leftrightIntroduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at top(width,height) \ No newline at end of file diff --git a/2-ui/1-document/11-coordinates/coordinates.svg b/2-ui/1-document/11-coordinates/coordinates.svg index 2d789c1cf..5e0b6f185 100644 --- a/2-ui/1-document/11-coordinates/coordinates.svg +++ b/2-ui/1-document/11-coordinates/coordinates.svg @@ -1 +1 @@ -heightbottomxleftywidthrightIntroduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at top \ No newline at end of file +heightbottomxleftywidthrightIntroduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at top \ No newline at end of file diff --git a/2-ui/1-document/11-coordinates/document-and-window-coordinates-scrolled.svg b/2-ui/1-document/11-coordinates/document-and-window-coordinates-scrolled.svg index 204f02c85..8b4270ff0 100644 --- a/2-ui/1-document/11-coordinates/document-and-window-coordinates-scrolled.svg +++ b/2-ui/1-document/11-coordinates/document-and-window-coordinates-scrolled.svg @@ -1 +1 @@ -Introduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at Netscape and first appeared in that company’s Navigator 2.0 browser. It has appeared in all subsequent browsers from Netscape and in all browsers from Microsoft starting with Internet Explorer 3.0. The development of this Standard started in November 1996. The first edition of this Ecma Standard was adopted by the Ecma General Assembly of June 1997. That Ecma Standard was submitted to ISO/ IEC JTC 1 for adoption under the fast-track procedure, and approved as international standard ISO/IEC 16262, in April 1998. The Ecma General Assembly of June 1998 approved the second edition of ECMA-262 to keep it fully aligned with ISO/IEC 16262. Changes between the first and the second edition are editorial in nature.😍pageYclientYpageXclientXIntroduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at Netscape and first appeared in that company’s Navigator 2.0 browser. It has appeared in all subsequent browsers from Netscape and in all browsers from Microsoft starting with Internet Explorer 3.0. The development of this Standard started in November 1996. The first edition of this Ecma Standard was adopted by the Ecma General Assembly of June 1997. That Ecma Standard was submitted to ISO/ IEC JTC 1 for adoption under the fast-track procedure, and approved as international standard ISO/IEC 16262, in April 1998. The Ecma General Assembly of June 1998 approved the second edition of ECMA-262 to keep it fully aligned with ISO/IEC 16262. Changes between the first and the second edition are editorial in nature.pageYclientYpageXclientX😍 \ No newline at end of file +Introduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at Netscape and first appeared in that company’s Navigator 2.0 browser. It has appeared in all subsequent browsers from Netscape and in all browsers from Microsoft starting with Internet Explorer 3.0. The development of this Standard started in November 1996. The first edition of this Ecma Standard was adopted by the Ecma General Assembly of June 1997. That Ecma Standard was submitted to ISO/ IEC JTC 1 for adoption under the fast-track procedure, and approved as international standard ISO/IEC 16262, in April 1998. The Ecma General Assembly of June 1998 approved the second edition of ECMA-262 to keep it fully aligned with ISO/IEC 16262. Changes between the first and the second edition are editorial in nature.😍pageYclientYpageXclientXIntroduction This Ecma Standard is based on several originating technologies, the most well known being JavaScript (Netscape) and JScript (Microsoft). The language was invented by Brendan Eich at Netscape and first appeared in that company’s Navigator 2.0 browser. It has appeared in all subsequent browsers from Netscape and in all browsers from Microsoft starting with Internet Explorer 3.0. The development of this Standard started in November 1996. The first edition of this Ecma Standard was adopted by the Ecma General Assembly of June 1997. That Ecma Standard was submitted to ISO/ IEC JTC 1 for adoption under the fast-track procedure, and approved as international standard ISO/IEC 16262, in April 1998. The Ecma General Assembly of June 1998 approved the second edition of ECMA-262 to keep it fully aligned with ISO/IEC 16262. Changes between the first and the second edition are editorial in nature.pageYclientYpageXclientX😍 \ No newline at end of file diff --git a/2-ui/2-events/02-bubbling-and-capturing/event-order-bubbling.svg b/2-ui/2-events/02-bubbling-and-capturing/event-order-bubbling.svg index 580022a9f..e3d749898 100644 --- a/2-ui/2-events/02-bubbling-and-capturing/event-order-bubbling.svg +++ b/2-ui/2-events/02-bubbling-and-capturing/event-order-bubbling.svg @@ -1 +1 @@ -123Most deeply nested element \ No newline at end of file +123Most deeply nested element \ No newline at end of file diff --git a/2-ui/2-events/03-event-delegation/4-behavior-tooltip/task.md b/2-ui/2-events/03-event-delegation/4-behavior-tooltip/task.md index 73102a92b..3001b9915 100644 --- a/2-ui/2-events/03-event-delegation/4-behavior-tooltip/task.md +++ b/2-ui/2-events/03-event-delegation/4-behavior-tooltip/task.md @@ -22,8 +22,10 @@ In this task we assume that all elements with `data-tooltip` have only text insi Details: +- The distance between the element and the tooltip should be `5px`. +- The tooltip should be centered relative to the element, if possible. - The tooltip should not cross window edges. Normally it should be above the element, but if the element is at the page top and there's no space for the tooltip, then below it. -- The tooltip is given in the `data-tooltip` attribute. It can be arbitrary HTML. +- The tooltip content is given in the `data-tooltip` attribute. It can be arbitrary HTML. You'll need two events here: - `mouseover` triggers when a pointer comes over an element. diff --git a/2-ui/2-events/03-event-delegation/article.md b/2-ui/2-events/03-event-delegation/article.md index e146a6f2d..3d8beda0f 100644 --- a/2-ui/2-events/03-event-delegation/article.md +++ b/2-ui/2-events/03-event-delegation/article.md @@ -163,7 +163,7 @@ The handler reads the attribute and executes the method. Take a look at the work Please note that `this.onClick` is bound to `this` in `(*)`. That's important, because otherwise `this` inside it would reference the DOM element (`elem`), not the `Menu` object, and `this[action]` would not be what we need. -So, what the delegation gives us here? +So, what advantages does delegation give us here? ```compare + We don't need to write the code to assign a handler to each button. Just make a method and put it in the markup. @@ -242,13 +242,13 @@ That may become really convenient -- no need to write JavaScript for every such We can combine multiple behaviors on a single element as well. -The "behavior" pattern can be an alternative of mini-fragments of JavaScript. +The "behavior" pattern can be an alternative to mini-fragments of JavaScript. ## Summary Event delegation is really cool! It's one of the most helpful patterns for DOM events. -It's often used to add same handling for many similar elements, but not only for that. +It's often used to add the same handling for many similar elements, but not only for that. The algorithm: @@ -261,12 +261,12 @@ Benefits: ```compare + Simplifies initialization and saves memory: no need to add many handlers. + Less code: when adding or removing elements, no need to add/remove handlers. -+ DOM modifications: we can mass add/remove elements with `innerHTML` and alike. ++ DOM modifications: we can mass add/remove elements with `innerHTML` and the like. ``` The delegation has its limitations of course: ```compare - First, the event must be bubbling. Some events do not bubble. Also, low-level handlers should not use `event.stopPropagation()`. -- Second, the delegation may add CPU load, because the container-level handler reacts on events in any place of the container, no matter if they interest us or not. But usually the load is negligible, so we don't take it into account. +- Second, the delegation may add CPU load, because the container-level handler reacts on events in any place of the container, no matter whether they interest us or not. But usually the load is negligible, so we don't take it into account. ``` diff --git a/2-ui/2-events/03-event-delegation/bagua-bubble.svg b/2-ui/2-events/03-event-delegation/bagua-bubble.svg index b770f8c55..bb9989b45 100644 --- a/2-ui/2-events/03-event-delegation/bagua-bubble.svg +++ b/2-ui/2-events/03-event-delegation/bagua-bubble.svg @@ -1 +1 @@ -<table><td><strong>event.target \ No newline at end of file +<table><td><strong>event.target \ No newline at end of file diff --git a/2-ui/2-events/04-default-browser-action/1-why-return-false-fails/solution.md b/2-ui/2-events/04-default-browser-action/1-why-return-false-fails/solution.md index 2862e6006..4d175ca01 100644 --- a/2-ui/2-events/04-default-browser-action/1-why-return-false-fails/solution.md +++ b/2-ui/2-events/04-default-browser-action/1-why-return-false-fails/solution.md @@ -20,7 +20,7 @@ The fix is simple: } -w3.org +w3.org ``` Also we can use `event.preventDefault()`, like this: @@ -35,5 +35,5 @@ Also we can use `event.preventDefault()`, like this: */!* -w3.org +w3.org ``` diff --git a/2-ui/2-events/04-default-browser-action/1-why-return-false-fails/task.md b/2-ui/2-events/04-default-browser-action/1-why-return-false-fails/task.md index 8fa4fb29a..9a5bb98ac 100644 --- a/2-ui/2-events/04-default-browser-action/1-why-return-false-fails/task.md +++ b/2-ui/2-events/04-default-browser-action/1-why-return-false-fails/task.md @@ -14,7 +14,7 @@ Why in the code below `return false` doesn't work at all? } -the browser will go to w3.org +the browser will go to w3.org ``` The browser follows the URL on click, but we don't want it. diff --git a/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/solution.view/index.html b/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/solution.view/index.html index 90aecd9dc..51ac0838b 100644 --- a/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/solution.view/index.html +++ b/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/solution.view/index.html @@ -16,7 +16,7 @@
#contents

- How about to read Wikipedia or visit W3.org and learn about modern standards? + How about to read Wikipedia or visit W3.org and learn about modern standards?

diff --git a/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/source.view/index.html b/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/source.view/index.html index b88834c96..f0c934391 100644 --- a/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/source.view/index.html +++ b/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/source.view/index.html @@ -16,7 +16,7 @@
#contents

- How about to read Wikipedia or visit W3.org and learn about modern standards? + How about to read Wikipedia or visit W3.org and learn about modern standards?

diff --git a/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/task.md b/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/task.md index 6439376bf..6ca456c2c 100644 --- a/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/task.md +++ b/2-ui/2-events/04-default-browser-action/2-catch-link-navigation/task.md @@ -12,5 +12,5 @@ Like this: Details: -- HTML inside the element may be loaded or regenerated dynamically at any time, so we can't find all links and put handlers on them. Use the event delegation. +- HTML inside the element may be loaded or regenerated dynamically at any time, so we can't find all links and put handlers on them. Use event delegation. - The content may have nested tags. Inside links too, like `...`. diff --git a/2-ui/2-events/04-default-browser-action/article.md b/2-ui/2-events/04-default-browser-action/article.md index 0a0131a1c..8bb2ffc6a 100644 --- a/2-ui/2-events/04-default-browser-action/article.md +++ b/2-ui/2-events/04-default-browser-action/article.md @@ -8,7 +8,7 @@ For instance: - A click on a form submit button - initiates its submission to the server. - Pressing a mouse button over a text and moving it - selects the text. -If we handle an event in JavaScript, we may not want the corresponding browser action to happen, to implement another behavior instead. +If we handle an event in JavaScript, we may not want the corresponding browser action to happen, and want to implement another behavior instead. ## Preventing browser actions @@ -207,7 +207,7 @@ As we can clearly see, `event.stopPropagation()` and `event.preventDefault()` (a ``` ```smart header="Nested context menus architecture" -There are also alternative ways to implement nested context menus. One of them is to have a single global object with a handler for `document.oncontextmenu`, and also methods that allow to store other handlers in it. +There are also alternative ways to implement nested context menus. One of them is to have a single global object with a handler for `document.oncontextmenu`, and also methods that allow us to store other handlers in it. The object will catch any right-click, look through stored handlers and run the appropriate one. @@ -240,5 +240,5 @@ But we should generally keep the semantic meaning of HTML elements. For instance Besides being "just a good thing", that makes your HTML better in terms of accessibility. -Also if we consider the example with ``, then please note: a browser allows to open such links in a new window (by right-clicking them and other means). And people like that. But if we make a button behave as a link using JavaScript and even look like a link using CSS, then ``-specific browser features still won't work for it. +Also if we consider the example with ``, then please note: a browser allows us to open such links in a new window (by right-clicking them and other means). And people like that. But if we make a button behave as a link using JavaScript and even look like a link using CSS, then ``-specific browser features still won't work for it. ``` diff --git a/2-ui/2-events/05-dispatch-events/article.md b/2-ui/2-events/05-dispatch-events/article.md index 771f5527b..ad9092fd8 100644 --- a/2-ui/2-events/05-dispatch-events/article.md +++ b/2-ui/2-events/05-dispatch-events/article.md @@ -211,7 +211,7 @@ Please note: the event must have the flag `cancelable: true`, otherwise the call ## Events-in-events are synchronous -Usually events are processed asynchronously. That is: if the browser is processing `onclick` and in the process a new event occurs, then it awaits till `onclick` processing is finished. +Usually events are processed asynchronously. That is: if the browser is processing `onclick` and in the process a new event occurs, then it waits until the `onclick` processing is finished. The exception is when one event is initiated from within another one. diff --git a/2-ui/3-event-details/1-mouse-events-basics/article.md b/2-ui/3-event-details/1-mouse-events-basics/article.md index 412c40073..42f4b6f50 100644 --- a/2-ui/3-event-details/1-mouse-events-basics/article.md +++ b/2-ui/3-event-details/1-mouse-events-basics/article.md @@ -47,7 +47,7 @@ In cases when a single action initiates multiple events, their order is fixed. T ```online Click the button below and you'll see the events. Try double-click too. -On the teststand below all mouse events are logged, and if there are more than 1 second delay between them, then they are separated by a horizontal ruler. +On the teststand below all mouse events are logged, and if there is more than a 1 second delay between them they are separated by a horizontal ruler. Also we can see the `which` property that allows to detect the mouse button. @@ -110,7 +110,7 @@ So if we want to support combinations like `key:Ctrl`+click, then for Mac it mak Even if we'd like to force Mac users to `key:Ctrl`+click -- that's kind of difficult. The problem is: a left-click with `key:Ctrl` is interpreted as a *right-click* on MacOS, and it generates the `contextmenu` event, not `click` like Windows/Linux. -So if we want users of all operational systems to feel comfortable, then together with `ctrlKey` we should check `metaKey`. +So if we want users of all operating systems to feel comfortable, then together with `ctrlKey` we should check `metaKey`. For JS-code it means that we should check `if (event.ctrlKey || event.metaKey)`. ``` diff --git a/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/2-hoverintent/source.view/index.html b/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/2-hoverintent/source.view/index.html index 856daf3a8..df0f13656 100644 --- a/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/2-hoverintent/source.view/index.html +++ b/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/2-hoverintent/source.view/index.html @@ -3,10 +3,9 @@ - Document - + @@ -26,6 +25,8 @@ new HoverIntent({ elem, over() { + tooltip.style.left = elem.getBoundingClientRect().left + 5 + 'px'; + tooltip.style.top = elem.getBoundingClientRect().bottom + 5 + 'px'; tooltip.hidden = false; }, out() { diff --git a/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/2-hoverintent/source.view/style.css b/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/2-hoverintent/source.view/style.css index 980e9457e..fa2f09eba 100644 --- a/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/2-hoverintent/source.view/style.css +++ b/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/2-hoverintent/source.view/style.css @@ -2,6 +2,10 @@ color: red; } +body { + margin: 0; +} + .minutes { color: green; } @@ -20,9 +24,15 @@ top: 0; } -.tooltip { +#tooltip { position: absolute; - background: #eee; - border: 1px brown solid; - padding: 3px; + padding: 10px 20px; + border: 1px solid #b3c9ce; + border-radius: 4px; + text-align: center; + font: italic 14px/1.3 sans-serif; + color: #333; + background: #fff; + z-index: 100000; + box-shadow: 3px 3px 3px rgba(0, 0, 0, .3); } diff --git a/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/article.md b/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/article.md index be6090aef..cbabd2f4b 100644 --- a/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/article.md +++ b/2-ui/3-event-details/3-mousemove-mouseover-mouseout-mouseenter-mouseleave/article.md @@ -145,7 +145,7 @@ When the pointer leaves an element -- `mouseleave` triggers. ```online This example is similar to the one above, but now the top element has `mouseenter/mouseleave` instead of `mouseover/mouseout`. -As you can see, the only generated events are the ones related to moving the pointer in and out of the top element. Nothing happens when the pointer goes to the child and back. Transitions between descendants are ignores +As you can see, the only generated events are the ones related to moving the pointer in and out of the top element. Nothing happens when the pointer goes to the child and back. Transitions between descendants are ignored [codetabs height=340 src="mouseleave"] ``` diff --git a/2-ui/3-event-details/4-mouse-drag-and-drop/2-drag-heroes/solution.view/field.svg b/2-ui/3-event-details/4-mouse-drag-and-drop/2-drag-heroes/solution.view/field.svg index f5562f97a..ca8bbc3bd 100644 --- a/2-ui/3-event-details/4-mouse-drag-and-drop/2-drag-heroes/solution.view/field.svg +++ b/2-ui/3-event-details/4-mouse-drag-and-drop/2-drag-heroes/solution.view/field.svg @@ -1 +1 @@ -(0,0)clientWidth \ No newline at end of file +(0,0)clientWidth \ No newline at end of file diff --git a/2-ui/3-event-details/4-mouse-drag-and-drop/article.md b/2-ui/3-event-details/4-mouse-drag-and-drop/article.md index 2418ffd66..38a96fb1e 100644 --- a/2-ui/3-event-details/4-mouse-drag-and-drop/article.md +++ b/2-ui/3-event-details/4-mouse-drag-and-drop/article.md @@ -124,7 +124,7 @@ Let's update our algorithm: ```js // onmousemove - // у мяча ball стоит position:absoute + // ball has position:absoute ball.style.left = event.pageX - *!*shiftX*/!* + 'px'; ball.style.top = event.pageY - *!*shiftY*/!* + 'px'; ``` diff --git a/2-ui/3-event-details/5-keyboard-events/german-layout.svg b/2-ui/3-event-details/5-keyboard-events/german-layout.svg index d107c2240..8a880e8e0 100644 --- a/2-ui/3-event-details/5-keyboard-events/german-layout.svg +++ b/2-ui/3-event-details/5-keyboard-events/german-layout.svg @@ -1 +1 @@ -StrgStrgAl tAlt GrWinWinMenu \ No newline at end of file +StrgStrgAl tAlt GrWinWinMenu \ No newline at end of file diff --git a/2-ui/3-event-details/8-onscroll/3-load-visible-img/source.view/index.html b/2-ui/3-event-details/8-onscroll/3-load-visible-img/source.view/index.html index 5c6027a6f..9953ace66 100644 --- a/2-ui/3-event-details/8-onscroll/3-load-visible-img/source.view/index.html +++ b/2-ui/3-event-details/8-onscroll/3-load-visible-img/source.view/index.html @@ -169,38 +169,8 @@

Neptune

* It's enough that the top or bottom edge of the element are visible */ function isVisible(elem) { - - let coords = elem.getBoundingClientRect(); - - let windowHeight = document.documentElement.clientHeight; - - // top elem edge is visible OR bottom elem edge is visible - let topVisible = coords.top > 0 && coords.top < windowHeight; - let bottomVisible = coords.bottom < windowHeight && coords.bottom > 0; - - return topVisible || bottomVisible; - } - - /** - A variant of the test that considers the element visible if it's no more than - one page after/behind the current screen. - - function isVisible(elem) { - - let coords = elem.getBoundingClientRect(); - - let windowHeight = document.documentElement.clientHeight; - - let extendedTop = -windowHeight; - let extendedBottom = 2 * windowHeight; - - // top visible || bottom visible - let topVisible = coords.top > extendedTop && coords.top < extendedBottom; - let bottomVisible = coords.bottom < extendedBottom && coords.bottom > extendedTop; - - return topVisible || bottomVisible; + // todo: your code } - */ function showVisible() { for (let img of document.querySelectorAll('img')) { diff --git a/2-ui/4-forms-controls/1-form-elements/1-add-select-option/task.md b/2-ui/4-forms-controls/1-form-elements/1-add-select-option/task.md index 9b218aa7f..a0e74da57 100644 --- a/2-ui/4-forms-controls/1-form-elements/1-add-select-option/task.md +++ b/2-ui/4-forms-controls/1-form-elements/1-add-select-option/task.md @@ -18,3 +18,5 @@ Use JavaScript to: 1. Show the value and the text of the selected option. 2. Add an option: ``. 3. Make it selected. + +Note, if you've done everything right, your alert should show `blues`. diff --git a/2-ui/4-forms-controls/1-form-elements/form-navigation.svg b/2-ui/4-forms-controls/1-form-elements/form-navigation.svg index 113e7da55..b112e250a 100644 --- a/2-ui/4-forms-controls/1-form-elements/form-navigation.svg +++ b/2-ui/4-forms-controls/1-form-elements/form-navigation.svg @@ -1 +1 @@ -formelements[0]elements[1]elements[n]...formform \ No newline at end of file +formelements[0]elements[1]elements[n]...formform \ No newline at end of file diff --git a/2-ui/99-ui-misc/02-selection-range/article.md b/2-ui/99-ui-misc/02-selection-range/article.md index d6c8762c1..862975dc1 100644 --- a/2-ui/99-ui-misc/02-selection-range/article.md +++ b/2-ui/99-ui-misc/02-selection-range/article.md @@ -428,7 +428,7 @@ Form elements, such as `input` and `textarea` provide [special API for selection Properties: - `input.selectionStart` -- position of selection start (writeable), -- `input.selectionEnd` -- position of selection start (writeable), +- `input.selectionEnd` -- position of selection end (writeable), - `input.selectionDirection` -- selection direction, one of: "forward", "backward" or "none" (if e.g. selected with a double mouse click), Events: diff --git a/2-ui/99-ui-misc/02-selection-range/range-example-p-2-b-3-range.svg b/2-ui/99-ui-misc/02-selection-range/range-example-p-2-b-3-range.svg index cb21d022c..66397f20f 100644 --- a/2-ui/99-ui-misc/02-selection-range/range-example-p-2-b-3-range.svg +++ b/2-ui/99-ui-misc/02-selection-range/range-example-p-2-b-3-range.svg @@ -1 +1 @@ -startContainer (<p>.firstChild)startOffset (=2)commonAncestorContainer (<p>)endContainer (<b>.firstChild)endOffset (=3) \ No newline at end of file +startContainer (<p>.firstChild)startOffset (=2)commonAncestorContainer (<p>)endContainer (<b>.firstChild)endOffset (=3) \ No newline at end of file diff --git a/2-ui/99-ui-misc/02-selection-range/selection-firefox.svg b/2-ui/99-ui-misc/02-selection-range/selection-firefox.svg index 8ce5b47c7..879e1cecb 100644 --- a/2-ui/99-ui-misc/02-selection-range/selection-firefox.svg +++ b/2-ui/99-ui-misc/02-selection-range/selection-firefox.svg @@ -1 +1 @@ -selection \ No newline at end of file +selection \ No newline at end of file diff --git a/2-ui/99-ui-misc/03-event-loop/eventLoop-full.svg b/2-ui/99-ui-misc/03-event-loop/eventLoop-full.svg index 044bab6f3..9e4691404 100644 --- a/2-ui/99-ui-misc/03-event-loop/eventLoop-full.svg +++ b/2-ui/99-ui-misc/03-event-loop/eventLoop-full.svg @@ -1 +1 @@ -...mousemoveevent loopmicrotasksrendermicrotasksrenderscriptsetTimeout \ No newline at end of file +...mousemoveevent loopmicrotasksrendermicrotasksrenderscriptsetTimeout \ No newline at end of file diff --git a/2-ui/99-ui-misc/03-event-loop/eventLoop.svg b/2-ui/99-ui-misc/03-event-loop/eventLoop.svg index 57f5188ce..f7de0b6ad 100644 --- a/2-ui/99-ui-misc/03-event-loop/eventLoop.svg +++ b/2-ui/99-ui-misc/03-event-loop/eventLoop.svg @@ -1 +1 @@ -...mousemovescriptevent loopmacrotask queuesetTimeout \ No newline at end of file +...mousemovescriptevent loopmacrotask queuesetTimeout \ No newline at end of file diff --git a/5-network/02-formdata/article.md b/5-network/02-formdata/article.md index fb028f5c8..1c28296d2 100644 --- a/5-network/02-formdata/article.md +++ b/5-network/02-formdata/article.md @@ -54,14 +54,14 @@ In this example, the server code is not presented, as it's beyound our scope. Th We can modify fields in `FormData` with methods: - `formData.append(name, value)` - add a form field with the given `name` and `value`, -- `formData.append(name, blob, fileName)` - add a field as if it were ``, the third argument `fileName` sets file name (not form field name), as it it were a name of the file in user's filesystem, +- `formData.append(name, blob, fileName)` - add a field as if it were ``, the third argument `fileName` sets file name (not form field name), as it were a name of the file in user's filesystem, - `formData.delete(name)` - remove the field with the given `name`, - `formData.get(name)` - get the value of the field with the given `name`, - `formData.has(name)` - if there exists a field with the given `name`, returns `true`, otherwise `false` A form is technically allowed to have many fields with the same `name`, so multiple calls to `append` add more same-named fields. -There's also method `set`, with the same syntax as `append`. The difference is that `.set` removes all fields with the given `name`, and then appends a new field. So it makes sure there's only field with such `name`, the rest is just like `append`: +There's also method `set`, with the same syntax as `append`. The difference is that `.set` removes all fields with the given `name`, and then appends a new field. So it makes sure there's only one field with such `name`, the rest is just like `append`: - `formData.set(name, value)`, - `formData.set(name, blob, fileName)`. diff --git a/5-network/05-fetch-crossorigin/cors-gmail-messages.svg b/5-network/05-fetch-crossorigin/cors-gmail-messages.svg index 48dc02930..8b6963345 100644 --- a/5-network/05-fetch-crossorigin/cors-gmail-messages.svg +++ b/5-network/05-fetch-crossorigin/cors-gmail-messages.svg @@ -1 +1 @@ -evil.comgot the cookie? okay!gmail.comGET /messagescookie: user=John{"messages": [...]} \ No newline at end of file +evil.comgot the cookie? okay!gmail.comGET /messagescookie: user=John{"messages": [...]} \ No newline at end of file diff --git a/5-network/10-long-polling/long-polling.svg b/5-network/10-long-polling/long-polling.svg index a2fd05b5d..bac56f114 100644 --- a/5-network/10-long-polling/long-polling.svg +++ b/5-network/10-long-polling/long-polling.svg @@ -1 +1 @@ -BrowserServerrequestconnection hangsconnection breaks end of requestdatarequestconnection hangsrequestdataconnection breaks end of request \ No newline at end of file +BrowserServerrequestconnection hangsconnection breaks end of requestdatarequestconnection hangsrequestdataconnection breaks end of request \ No newline at end of file diff --git a/5-network/11-websocket/article.md b/5-network/11-websocket/article.md index 4eaf47ed2..eab41b18f 100644 --- a/5-network/11-websocket/article.md +++ b/5-network/11-websocket/article.md @@ -119,9 +119,9 @@ For instance: - `Sec-WebSocket-Extensions: deflate-frame` means that the browser supports data compression. An extension is something related to transferring the data, functionality that extends WebSocket protocol. The header `Sec-WebSocket-Extensions` is sent automatically by the browser, with the list of all extenions it supports. -- `Sec-WebSocket-Protocol: soap, wamp` means that we'd like to transfer not just any data, but the data in [SOAP](http://en.wikipedia.org/wiki/SOAP) or WAMP ("The WebSocket Application Messaging Protocol") protocols. WebSocket subprotocols are registered in the [IANA catalogue](http://www.iana.org/assignments/websocket/websocket.xml). +- `Sec-WebSocket-Protocol: soap, wamp` means that we'd like to transfer not just any data, but the data in [SOAP](http://en.wikipedia.org/wiki/SOAP) or WAMP ("The WebSocket Application Messaging Protocol") protocols. WebSocket subprotocols are registered in the [IANA catalogue](http://www.iana.org/assignments/websocket/websocket.xml). So, this header describes data formats that we're going to use. - This optional header is set by us, to tell the server which subprotocols our code supports, using the second (optional) parameter of `new WebSocket`. That's the array of subprotocols, e.g. if we'd like to use SOAP or WAMP: + This optional header is set using the second parameter of `new WebSocket`. That's the array of subprotocols, e.g. if we'd like to use SOAP or WAMP: ```js let socket = new WebSocket("wss://javascript.info/chat", ["soap", "wamp"]); diff --git a/6-data-storage/01-cookie/cookie-third-party-2.svg b/6-data-storage/01-cookie/cookie-third-party-2.svg index 373e195d9..94003610a 100644 --- a/6-data-storage/01-cookie/cookie-third-party-2.svg +++ b/6-data-storage/01-cookie/cookie-third-party-2.svg @@ -1 +1 @@ -<img src="https://ads.com/banner.png">site.comads.comGET /banner.pngcookie: id=123 \ No newline at end of file +<img src="https://ads.com/banner.png">site.comads.comGET /banner.pngcookie: id=123 \ No newline at end of file diff --git a/6-data-storage/01-cookie/cookie-third-party-3.svg b/6-data-storage/01-cookie/cookie-third-party-3.svg index 76356a2d0..a67f09c7f 100644 --- a/6-data-storage/01-cookie/cookie-third-party-3.svg +++ b/6-data-storage/01-cookie/cookie-third-party-3.svg @@ -1 +1 @@ -<img src="https://ads.com/banner.png">other.comads.comGET /banner.pngcookie: id=123 \ No newline at end of file +<img src="https://ads.com/banner.png">other.comads.comGET /banner.pngcookie: id=123 \ No newline at end of file diff --git a/6-data-storage/01-cookie/cookie-third-party.svg b/6-data-storage/01-cookie/cookie-third-party.svg index 4a512a498..567f25595 100644 --- a/6-data-storage/01-cookie/cookie-third-party.svg +++ b/6-data-storage/01-cookie/cookie-third-party.svg @@ -1 +1 @@ -<img src="https://ads.com/banner.png">site.comads.comGET /banner.pngSet-Cookie: id=123 \ No newline at end of file +<img src="https://ads.com/banner.png">site.comads.comGET /banner.pngSet-Cookie: id=123 \ No newline at end of file diff --git a/6-data-storage/01-cookie/cookie-xsrf.svg b/6-data-storage/01-cookie/cookie-xsrf.svg index 88843043e..968b42d5b 100644 --- a/6-data-storage/01-cookie/cookie-xsrf.svg +++ b/6-data-storage/01-cookie/cookie-xsrf.svg @@ -1 +1 @@ -<form action="https://bank.com/pay"> .... </form>evil.comgot the cookie? okay!bank.comPOST /paycookie: user=John \ No newline at end of file +<form action="https://bank.com/pay"> .... </form>evil.comgot the cookie? okay!bank.comPOST /paycookie: user=John \ No newline at end of file diff --git a/6-data-storage/03-indexeddb/indexeddb-index.svg b/6-data-storage/03-indexeddb/indexeddb-index.svg index de4e7fa02..9bee3ef81 100644 --- a/6-data-storage/03-indexeddb/indexeddb-index.svg +++ b/6-data-storage/03-indexeddb/indexeddb-index.svg @@ -1 +1 @@ -id: 'html' price: 3id: 'css' price: 53: ['html'] 5: ['css'] 10: ['js','nodejs']id: 'js' price: 10id: 'nodejs' price: 10booksindex \ No newline at end of file +id: 'html' price: 3id: 'css' price: 53: ['html'] 5: ['css'] 10: ['js','nodejs']id: 'js' price: 10id: 'nodejs' price: 10booksindex \ No newline at end of file diff --git a/figures.sketch b/figures.sketch index 6230b60d9..d926fea53 100644 Binary files a/figures.sketch and b/figures.sketch differ