From 970492259a7355bc8800043d41a512c0958c0645 Mon Sep 17 00:00:00 2001
From: Jake Lazaroff <yo@jake.nyc>
Date: Sun, 28 Jan 2024 15:50:51 -0500
Subject: [PATCH] Send stereo output through specific output channels

---
 ...o-output-through-specific-output-channels.md | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 logic/send-stereo-output-through-specific-output-channels.md

diff --git a/logic/send-stereo-output-through-specific-output-channels.md b/logic/send-stereo-output-through-specific-output-channels.md
new file mode 100644
index 0000000..30b1de2
--- /dev/null
+++ b/logic/send-stereo-output-through-specific-output-channels.md
@@ -0,0 +1,17 @@
+# Send stereo output through specific output channels
+
+This probably works for many audio interfaces, though in this case I'm using it with a [Quad Cortex](https://neuraldsp.com/quad-cortex). When I have my interface hooked up to my computer, I want to route stereo output to the specific output channels that are connected to my speakers.
+
+This works as of Logic Pro 10.8.1.
+
+First, ensure the interface is selected as the output device:
+
+1. Open Settings, either by going through the Logic Pro menu or hitting `⌘,`.
+2. Switch to the Audio tab.
+3. Select the interface in the Output Device dropdown.
+
+Then, change the output channels:
+
+1. In the Audio tab, select the nested I/O Assignments tab.
+2. Within the third level (!) of nested subtabs, select Output.
+3. Set the Output dropdown in the Stereo section to the desired outputs.