diff --git a/zwave_js/CHANGELOG.md b/zwave_js/CHANGELOG.md
index 975a0b4bc8c..01e2dfc6a9b 100644
--- a/zwave_js/CHANGELOG.md
+++ b/zwave_js/CHANGELOG.md
@@ -1,5 +1,44 @@
 # Changelog
 
+## 0.1.91
+
+### Breaking changes
+
+- Firmware updates may no longer work properly in Home Assistant versions 2023.9.x and earlier due to a breaking change upstream that couldn't be made backward compatible, but will work once again starting in 2023.10.0. This breaking change ultimately improves firmware updates, as checking for updates no longer requires communication with the device, therefore reducing the risk of corrupting manufacturer information. This also means that updates for battery-powered devices can be detected without waking up the devices.
+
+
+### Features
+
+- Unresponsive controllers are now detected and automatically restarted if possible.
+- Battery-powered devices are sent back to sleep after 250 ms with no command (down from 1000 ms). This should result in significant battery savings for devices that frequently wake up.
+- We no longer rebuild the @serialport/bindings-cpp package from source.
+
+
+### Bug fixes
+
+- A bug in the 7.19.x SDK has surfaced where the controller gets stuck in the middle of a transmission. Previously, this would go unnoticed because the failed commands would cause the nodes to be marked dead until the controller finally recovered. Since v11.12.0, however, Z-Wave JS would consider the controller jammed and retry the last command indefinitely. This situation is now detected, and Z-Wave JS attempts to recover by soft resetting the controller when this happens.
+- Fixed an issue where supporting controllers would no longer be automatically restarted after failing to do so once.
+- Devices that send notifications from endpoints, like Aeotec Wallmote, are now properly supported.
+
+
+### Config file changes
+
+- Add warnings about broken controller firmware versions
+- Add Heatit Z-Water 2
+- Add Shelly Wave 1PM
+- Add Heatit Z-TRM6
+- Increase poll delay for ZW500D
+- Add fingerprint for Simon IO Master Roller Blind
+- Add HOPPE eHandle ConnectSense
+- Add parameters to Zooz ZEN17 from firmware 1.30
+- Update Zooz ZEN32 config to the latest firmware, include 800 series
+
+### Detailed changelogs
+
+- [Z-Wave JS 11.14.3](https://github.com/zwave-js/node-zwave-js/releases/tag/v11.14.3)
+- [Z-Wave JS 12.0.0](https://github.com/zwave-js/node-zwave-js/releases/tag/v12.0.0)
+- [Z-Wave JS Server 1.32.0](https://github.com/zwave-js/zwave-js-server/releases/tag/1.32.0)
+
 ## 0.1.90
 
 ### Bug fixes
diff --git a/zwave_js/Dockerfile b/zwave_js/Dockerfile
index dc1acf3436c..a92c7d37bd4 100644
--- a/zwave_js/Dockerfile
+++ b/zwave_js/Dockerfile
@@ -21,7 +21,6 @@ RUN \
         "zwave-js@${ZWAVEJS_VERSION}" \
         "@zwave-js/server@${ZWAVEJS_SERVER_VERSION}" \
     \
-    && npm rebuild --build-from-source @serialport/bindings-cpp \
     && apk del --no-cache \
         .build-dependencies
 
diff --git a/zwave_js/build.yaml b/zwave_js/build.yaml
index 886ca75a242..5b0fc64a37a 100644
--- a/zwave_js/build.yaml
+++ b/zwave_js/build.yaml
@@ -9,5 +9,5 @@ codenotary:
   signer: notary@home-assistant.io
   base_image: notary@home-assistant.io
 args:
-  ZWAVEJS_SERVER_VERSION: 1.31.0
-  ZWAVEJS_VERSION: 11.14.2
+  ZWAVEJS_SERVER_VERSION: 1.32.0
+  ZWAVEJS_VERSION: 12.0.0
diff --git a/zwave_js/config.yaml b/zwave_js/config.yaml
index 57b45f74721..477c3b862c2 100644
--- a/zwave_js/config.yaml
+++ b/zwave_js/config.yaml
@@ -1,5 +1,5 @@
 ---
-version: 0.1.90
+version: 0.1.91
 slug: zwave_js
 name: Z-Wave JS
 description: Control a Z-Wave network with Home Assistant Z-Wave JS