diff --git a/docs/user-guide/.pages b/docs/user-guide/.pages
index 286f2c3..42633ce 100644
--- a/docs/user-guide/.pages
+++ b/docs/user-guide/.pages
@@ -6,4 +6,5 @@ nav:
   - external.md
   - harvester.md
   - shrink-expand.md
+  - grafana.md
   - ...
diff --git a/docs/user-guide/grafana.md b/docs/user-guide/grafana.md
new file mode 100644
index 0000000..8993281
--- /dev/null
+++ b/docs/user-guide/grafana.md
@@ -0,0 +1,119 @@
+# Grafana Dashboards
+
+To provide monitoring for most critical metrics from the switches managed by Hedgehog Fabric there are several Dashboards that may be used in Grafana deployments.
+
+## Alloy enablement
+
+`hedgehog-alloy` is installed for each SONiC-based switch in Hedgehog Fabric. However, the configuration of service has to be defined on the Fabric init stage.
+Following config should be added to `hhfab.yaml` init file.
+
+```yaml
+...
+  fabric:
+    controlProxy: true
+    alloy:
+      agentScrapeIntervalSeconds: # Interval between metrics collection from agent
+      unixScrapeIntervalSeconds: # Interval between metrics collection for Node Exporter
+      unixExporterEnabled: true # Enble Node Exporter Full
+      collectSyslogEnabled: true # Enable inspection of Syslog in Loki
+      lokiTargets:
+        lab:
+          url: # Url for Loki to push logs
+          useControlProxy: true # Route messages through Control node
+          labels:
+            env: # Environment name applied as label on metrics
+      prometheusTargets:
+        lab:
+          url: # Url for Prometheus to push metrics
+          useControlProxy: true
+          labels:
+            env: 
+          sendIntervalSeconds: # Interval between pushes to Prometheus collector
+          ...
+```
+
+
+## Variables
+List of common variables used in Hedgehog Grafana dashboards
+
+- **env** (Label: Env): `label_values(env)` - Environment to monitor
+- **node** (Label: Switch): `label_values(hostname)` - Switch Name
+- **vrf** (Label: VRF): `label_values(vrf)` - VRF name (Multi-value)
+- **neighbor** (Label: Neighbor): `label_values(neighbor)` - BGP Neighbor IP address(Multi-value)
+- **interface** (Label: Interface): `label_values(interface)` - Switch Interface name as defined in wiring (Multi-value)
+- **file** (Label: File): `label_valuse(filename)` - Name of Logs file to inspect (Loki)
+
+## Switch Critical Resources
+
+This table reports usage and capacity of ASIC's programmable resources 
+such as:
+
+- ACLs
+- IPv4 Routes
+- IPv4 Nexthops
+- IPv4 Neihbours
+- IPMC Table
+- FDB
+
+[JSON](./boards/grafana_crm.json)
+## Fabric
+
+Fabric underlay and external peering monitoring. Including reporing for:
+
+- BGP Neighbors
+- BGP Session state
+- Number of BGP Updates and Prefixes sent/received for each BGP Neighbor
+- Keepalive counters
+
+
+[JSON](./boards/grafana_fabric.json)
+
+## Interfaces
+
+Switch interfaces monitoring visualization that includes:
+
+- Interface Oper/Admin state
+- Total input/output packets counter
+- Input/output PPS/Bits rate
+- Interface utilization
+- Counters for Unicast/Broadcast/Multicast packets
+- Errors and discards counters
+
+
+[JSON](./boards/grafana_interfaces.json)
+
+## Logs
+
+System and fabric logs:
+
+- Kernel and BGP logs from Syslog
+- Errors in agent and syslog
+- Full output of defined file
+
+[JSON](./boards/grafana_logs.json)
+
+
+## Platform
+
+Information from PSU, temperature sensors and fan trays:
+
+- Input/output PSU voltage
+- Fan speed
+- Temperature from switch sensors (CPU, PSU, etc)
+- For transceivers with DOM - optic sensor temperature
+
+
+[JSON](./boards/grafana_platform.json)
+
+## Node Exporter
+
+[Grafana Node Exporter Full](https://grafana.com/grafana/dashboards/1860-node-exporter-full/) is an opensource Grafana board that provide
+visualizations for monitoring Linux nodes. In particular case Node Exporter is used to track SONiC OS own stats such as
+
+- Memory/disks usage
+- CPU/System utilization
+- Networking stats (traffic that hits SONiC interfaces)
+...
+
+
+[JSON](./boards/grafana_node_exporter.json)
\ No newline at end of file