CHANGELOG.md

Change Log

All notable changes to homebridge-ewelink will be documented in this file.

This project tries to adhere to Semantic Versioning. In practice, this means that the version number will be incremented based on the following:

• MAJOR version when a minimum supported version of homebridge or node is increased to a new major version, or when a breaking change is made to the plugin config
• MINOR version when a new device type is added, or when a new feature is added that is backwards-compatible
• PATCH version when backwards-compatible bug fixes are implemented

BETA

Added

• Support for ZigBee occupancy sensor with UIID 7016
• Support for ZigBee thermostat with UIID 7017

Changed

• Changed Rotation Speed characteristic for Fans from percentage to levels (#534) (@vadimpronin)
• Bump node recommended versions to v18.19.1 or v20.11.1
• Updated dependencies

12.1.0 (2023-12-16)

Added

• Support for ZigBee button with UIID 7000
• Support for ZigBee switch with UIID 7005

Changed

• Added plugin display name
• Don't overwrite the IP of a LAN device if it reports a different IP
• Bump node recommended versions to v18.19.0 or v20.10.0
• Updated dependencies

12.0.0 (2023-10-24)

Added

• Support for ZigBee motor device with UIID 7006
• Brightness and colour support for light device with UIID 173

Changed

• Updated dependencies
• Bump node supported versions to v18.18.2 or v20.8.1

Removed

• Support for node 16

11.0.2 (2023-08-28)

⚠️ Note this will be the last version of the plugin to support Node 16.

• Node 16 moves to 'end of life' on 2023-09-11 (more info)
• This is in-line with the Homebridge guidelines on supporting node versions (more info)
• If you are currently using Node 16, now is a good time to upgrade to Node 18 or 20 (see the link above for more info)

Changed

• Update axios to v1.5.0

11.0.1 (2023-08-19)

Changed

• Bump node recommended versions to v16.20.2 or v18.17.1 or v20.5.1
• Some code refactoring

11.0.0 (2023-07-24)

Added

• Support for B02-BL
• Support for SONOFF SNZB-02D
• Support for devices with UIID 191 with LAN mode
• Support for devices with UIID 7014

Breaking

• Remove official support for Node 14
• Remove option to disable plugin - this is now available in the Homebridge UI
• Remove option for debug logging - this will be enabled when using a beta version of the plugin
• Remove individual accessory logging options to simplify the config

Changed

• Bump homebridge recommended version to v1.6.0 or v2.0.0-beta
• Bump node recommended versions to v16.20.1 or v18.17.0 or v20.5.0
• Updated dependencies

10.4.0 (2023-01-07)

Added

• Expose a Sonoff D1 or KING-M4 as a fan accessory type
• Improved support for SwitchMan devices (Sonoff R5)

Changed

• Bump axios to v1.2.2
• Bump homebridge recommended version to v1.6.0 or v2.0.0-beta
• Bump node recommended versions to v14.21.2 or v16.19.0 or v18.13.0

Fixed

• Power readings for POWR320 now show correctly

10.3.0 (2022-11-11)

Added

• Support NSPanel Pro (as a temperature sensor) [UIID 195]

Changed

• Bump node recommended versions to v14.21.1 or v16.18.1 or v18.12.1
• Bump ws to v8.11.0

10.2.0 (2022-10-09)

Added

• Support devices with UIID 173 (Sonoff L3)
• Support devices with UIID 3258 (Zigbee RGBW light)
• Work-in-progress for devices with UUIDs:
  • 130 (SPM sub-unit)
  • 174 (SwitchMan devices)
  • 1514 (Zigbee motor controller)

Changed

• Allow for node v18.10.0
• Update axios to v1.1.2

Fixed

• Incorrectly exposing Sonoff M5 devices as programmable switches

10.1.0 (2022-09-25)

Added

• Support devices with UUID 128 (SPM Main Unit)
• Support devices with UUID 154 (DW2-Wifi-L)
• Support devices with UUID 168 (Zigbee Bridge Pro)
• Support devices with UUID 190 (POWR316/POWR316D/POWR320D)
• Work-in-progress for devices with UUIDs:
  • 130 (SPM sub-unit)
  • 174 (SwitchMan devices)
  • 173 (Sonoff L3)
  • 1514 (Zigbee motor controller)
  • 3258 (Zigbee RGBW light)

Changed

• Correct parameters for updatePlatformAccessories()
• Bump node recommended versions to v14.20.1 or v16.17.1
• Bump ws to v8.9.0
• Updated dev dependencies

10.0.0 (2022-07-08)

⚠️ After updating to this version:

• Each time you start the plugin, you will be logged out the eWeLink app, and so I would recommend:
  • Creating a new eWeLink account, and sharing your devices to this new account
  • Most importantly, you should use your main account with the plugin, and login to the eWeLink app with your shared account

Added

• Use a custom eWeLink APPID and APPSECRET if needed

Changed

• Bump node recommended versions to v14.20.0 or v16.16.0

9.1.0 (2022-07-07)

⚠️ This update may remove some devices from your Homebridge instance. Unfortunately this is out my control. See this link.

Added

• Support for Sonoff TH Elite

Changed

• Bump ws to v8.8.0
• Updated dev dependencies

9.0.1 (2022-06-08)

Changed

• Bump node recommended versions to v14.19.3 or v16.15.1

Fixed

• A potential issue showing errors in the logs

9.0.0 (2022-05-29)

Potentially Breaking Changes

⚠️ The minimum required version of Homebridge is now v1.4.0 ⚠️ The minimum required version of Node is now v14

Changed

• Changed to ESM package
• Bump node recommended versions to v14.19.3 or v16.15.0

8.15.0 (2022-05-02)

Added

• New Devices
  • Sonoff S40
• New Log Languages
  • Thai (thanks @tomzt)
• Configuration
  • offlineAsOff option for light devices - enable to show offline devices as 'off' in Homebridge/HomeKit

Changed

• Bump axios to v0.27.2
• Bump ws to v8.6.0
• Bump node recommended versions to v14.19.1 or v16.15.0

8.14.0 (2022-04-17)

Added

• New Devices
  • Sonoff B05-BL-A19 bulbs (UIID 136 devices) (also supports LAN mode)
  • Sonoff MINIR3 (UIID 138 devices) (also supports LAN mode)
  • Sonoff S-Mate (UIID 177 devices) as a Stateless Programmable Sensor

8.13.2 (2022-04-03)

Changed

• Updated dependencies

8.13.1 (2022-03-20)

Changed

• Bump axios to v0.26.1
• Bump node recommended versions to v14.19.1 or v16.14.2

8.13.0 (2022-02-23)

Added

• Support DUALR3 Lite

Changed

• Bump axios to v0.26.0

8.12.0 (2022-02-12)

Added

• Option to disable the timer for irrigation valve simulations
• Power information to supported devices in internal API
• Target temperature threshold for TH-heater simulation, see #346

Changed

• Bump node recommended versions to v14.19.0 or v16.14.0
• Bump homebridge recommended version to v1.4.0
• Bump ws to v8.5.0

8.11.2 (2022-01-23)

Changed

• Bump axios to v0.25.0

Fixed

• Fix LAN mode support for iFan04

8.11.1 (2022-01-15)

Changed

• Bump ws to v8.4.2

Fixed

• undefined log message on web socket error

8.11.0 (2022-01-13)

Added

• Option to ignore eWeLink homes by ID (IDs will be displayed in the log when plugin starts)

Changed

• Bump node recommended versions to v14.18.3 or v16.13.2
• Bump ws to v8.4.1

Fixed

• Minor colour temperature issue for Mangotek RLD60C0E27 (UIID 33)

8.10.0 (2022-01-07)

Added

• New Devices
  • Support for Mangotek RLD60C0E27 light (devices with UIID 33)
  • Support for Zigbee Smoke Sensors (devices with UIID 5026)

Fixed

• Plugin crash for older versions of Homebridge

8.9.1 (2022-01-05)

Changed

• Plugin will log HAPNodeJS version on startup
• Bump homebridge recommended version to v1.3.9

8.9.0 (2021-12-27)

Added

• Option to show both 'Heat' and 'Cool' modes for the TH10/16 thermostat simulation

8.8.0 (2021-12-21)

Added

• New Devices
  • Support for SwitchMan M5 (1/2/3 Gang)
  • Support for Sonoff NSPanel
• Simulations
  • Expose a single-channel device as a Heater or Cooler accessory type, using the current temperature value from another eWeLink, Govee or Meross sensor (Govee and Meross sensors will not work with HOOBS)
  • Current temperature values from sensors will be cached in the homebridge storage directory to allow my other plugins to create Heater and Cooler accessories with the temperature values
• eWeLink Groups
  • Expose eWeLink groups as HomeKit switches

Changed

• Some config options rearranged for easier access
• Bump ws to v8.4.0

8.7.1 (2021-12-09)

Fixed

• Show 'Hide Channels' and 'Inched Channels' in config schema form even when no 'Show As' is selected

8.7.0 (2021-12-08)

Added

• Support Sonoff L2
• Expose a single or multi-channel generic switch as a Audio Receiver, Set Top Box or Streaming Stick HomeKit category types
  • The accessory will need to be published as an external accessory meaning it will need to be added separately to HomeKit
• Expose an Eachen GD-DC5 as a lock simulation

Changed

• Bump homebridge recommended version to v1.3.8
• Bump node recommended versions to v14.18.2 or v16.13.1
• Bump ws to v8.3.0

Fixed

• Potential uncaught errors updating subdevices of an RF bridge

8.6.0 (2021-11-18)

Added

• The plugin will now retrieve devices from all your homes in your eWeLink account
• Expose an RF Bridge curtain device type as a HomeKit WindowCovering, Door or Window accessory simulation
• Expose a TH10/16 as a Thermostat device type

Fixed

• An issue initialising a 2-Garage-Door simulation

8.5.0 (2021-11-03)

Added

• Ability to use a contact sensor simulation to show the correct state of a garage door/lock simulation

8.4.2 (2021-10-31)

Changed

• Bump node recommended versions to v14.18.1 or v16.13.0
• Bump axios to v0.24.0

8.4.1 (2021-10-20)

Changed

• Some small changes to Fakegato debug logging

Fixed

• An Eve app 'no data' gap for garage and contact sensor devices when restarting the plugin

8.4.0 (2021-10-16)

Added

• Expose a single or multi-channel device as a gate type (shown as garage door)
  • If you use the Home app to open the door, it will then automatically close after a configured number of seconds

Changed

• disableNoResponse will be set to true by the plugin when using in LAN mode
• Recommended node versions bumped to v14.18.1 or v16.11.1
• Recommended Homebridge bumped to v1.3.5
• Bump axios to v0.23.0

Fixed

• An error when trying to unregister a hidden accessory from Homebridge

8.3.6 (2021-10-01)

Changed

• Bump ws to v8.2.3

8.3.5 (2021-10-01)

Changed

• Bump axios to v0.22.0

8.3.4 (2021-09-30)

Changed

• Recommended node versions bumped to v14.18.0 or v16.10.0

8.3.3 (2021-09-14)

Fixed

• Fixed an issue where an irrigation valve simulation would not turn off after the set time

8.3.2 (2021-09-09)

Changed

• configureAccessory function simplified to reduce chance of accessory cache retrieval failing
• Bump axios to v0.21.4
• Bump ws to v8.2.2

8.3.1 (2021-09-05)

Changed

• Recommended node version bumped to v14.17.6
• Bump axios to v0.21.3
• Bump ws to v8.2.1

8.3.0 (2021-08-26)

Added

• Support for KingArt KING-Q1 garage door device
• Expose KingArt KING-Q4 device as a Window or Door HomeKit accessory type
• Custom Eve characteristic to invert status of inched switch without sending a command to device

Changed

• 'Status By Inching' switches will no longer revert to 'off' when Homebridge is restarted

8.2.1 (2021-08-22)

Changed

• Bump ws to v8.2.0

Fixed

• An issue preventing DUALR3 from initialising
• Fix for uiid 112

8.2.0 (2021-08-22)

Added

• Support for UIIDs 138 139 140 141

8.1.0 (2021-08-17)

Added

• inchChannels option for multi-channel switches and outlets (where the plugin will set on/off status based on inching)
• language option to have the plugin log in French, thanks to @jp-lno

8.0.2 (2021-08-12)

Changed

• Platform Versions
  • Recommended node version bumped to v14.17.5

8.0.1 (2021-08-04)

Changed

• Improved battery calculations for DW2 sensors

8.0.0 (2021-07-29)

Important Note

• Your Accessory Simulations will stop working with this update if you have not re-set them up in the appropriate device configuration sections.
• There is no longer a separate Accessory Simulations section
• It is recommended to re-setup your simulations before updating to this version

Added

• Single Channel Devices
  • Option to configure a single channel device to set its status based on device inching
• DUALR3 Motor Mode
  • Expose a DUALR3 in motor mode as a GarageDoorOpener accessory type
• Temperature/Humidity Sensor Devices
  • Option to offset recorded temperature or humidity by a scale factor
• Configuration
  • disableNoResponse setting to disable marking cloud-offline devices as 'No Response' in HomeKit
  • Plugin will now check for duplicate device ID entries in the config and ignore them

Changed

• ⚠️ Platform Versions
  • Recommended node version bumped to v14.17.4
  • Recommended homebridge version bumped to v1.3.4
• ⚠️ Accessories
  • Plugin will now mark cloud-offline devices with 'No Response' by default
  • Plugin will now use HomeKit Battery service type instead of BatteryService
• Backend
  • Plugin will now reattempt initial HTTP connection on ECONNABORTED error

Fixed

• Plugin will correctly update StatusLowBattery characteristic with INT instead of type BOOL

Removed

• ⚠️ offlineAsNoResponse configuration setting - is now default - can be disabled with new disableNoResponse setting
• ⚠️ ignoredDevices configuration setting - now use the ignoreDevice option in the device type sections
• ⚠️ groups configuration setting - now use the showAs option in the device type sections

7.1.0 (2021-07-10)

Added

• New Devices
  • Support for Zigbee multi-channel devices

Changed

• Homebridge UI
  • label field now appears first in the device configuration sections
  • A device can now be ignored/removed from Homebridge by the ignoreDevice setting in the device configuration sections
• Bump ws dependency to v7.5.3

7.0.2 (2021-07-08)

Changes

• Revert node version bump to v14.17.3 (back to v14.17.2)

7.0.1 (2021-07-08)

Changes

• Device model in configuration will be validated

Fixed

• An issue preventing garage doors and locks with a defined sensor from initialising

7.0.0 (2021-07-08)

Important Notes

• This release includes breaking changes (denoted below with a ⚠️), so take note especially if:
  • You use the plugin in LAN-only mode,
  • You have Sonoff devices exposed as Outlet accessories, or
  • You use Accessory Simulations

Added

• LAN Mode (without eWeLink credentials)
  • The plugin now supports removing eWeLink credentials from the config when in LAN mode. It is important to read about this feature before enabling it - read more
• Homebridge UI
  • Device-specific settings will show and hide depending on the new 'Device Model' (deviceModel) option
  • This showing/hiding of options will hopefully be available in the HOOBS UI soon
• Accessory Logging
  • overrideLogging setting per device type (to replace the removed overrideDisabledLogging), which can be set to (and will override the global device logging and debug logging settings):
    • "default" to follow the global device update and debug logging setting for this accessory (default if setting not set)
    • "standard" to enable device update logging but disable debug logging for this accessory
    • "debug" to enable device update and debug logging for this accessory
    • "disable" to disable device update and debug logging for this accessory
• Startup Logging
  • An accessory warning if a manually configured IP is different from the discovered IP
  • An accessory warning if a shared device is used over the cloud
  • An accessory warning if a cloud-device is reported offline
• No Response Status
  • Added a global setting offlineAsNoResponse to mark cloud-offline accessories as 'No Response' in HomeKit
• Power Readings
  • Power readings (via Eve app) now visible for accessories when exposed as Switch
• DUALR3 Devices
  • Support for LAN mode control for DUALR3 in motor mode
  • Power readings (via Eve app) available when in motor mode
  • Option to expose as a WindowCovering, Window or Door accessory type when in motor mode
• iFan Devices
  • Support for LAN mode and ability to specify a manual IP
• TH10/16 Devices
  • Support for LAN mode for all Accessory Simulations and ability to specify a manual IP
• RF Bridge Devices
  • Ability to change sensor type and other configurable options without the need to re-add the accessory
  • Configuration option resetOnStartup to reset the subdevices, useful when adding/removing subdevices to the bridge
  • Added option to specify a manual IP for an RF Bridge
  • Added option to expose an RF sensor device as a Doorbell accessory type
  • Added option to expose an RF sensor device as a StatelessProgrammableSwitch accessory type
• Light Devices
  • Remove Adaptive Lighting feature from a device by setting the adaptiveLightingShift to -1
• Zigbee Button Devices
  • Comparison of trigger time against notification time to reduce duplicate accessory updates
  • Will no longer request current state when coming back online to reduce duplicate accessory updates
• Zigbee Switch Devices
  • Option to expose as an Outlet
• Humidity Sensor Devices
  • Config option to offset the recorded humidity (%RH) for devices that report this
• Accessory Simulations
  • Expose a generic single/multi-channel device as a Doorbell accessory
  • Expose a generic single/multi-channel device as a StatelessProgrammableSwitch accessory
  • Added the option of using a DW2 or Zigbee contact sensor to determine Locked and Unlocked state for lock simulation
  • Power readings (via Eve app) visible for simulations when using a DUALR3 device
• New Devices
  • Support for Zigbee leak sensors
  • Support for device with eWeLink UIID 67 RollingDoor

Changed

• LAN Mode
  • ⚠️ If you have the plugin in lan-only mode then the plugin will remove any accessories that do not support LAN mode
• Configuration
  • ⚠️ The 'Outlet Devices' (outletDevices[]) section has been removed from the configuration - you will need to reconfigured these devices within the 'Single Devices' (singleDevices[]) section
• Accessory Simulations
  • ⚠️ The 'Accessory Simulations' (groups[]) section will be removed in a future plugin version - you should now setup your simulations from within the appropriate device type section using the 'Show As' setting
    • Simulations for TH10/16, DW2 and doorbell, p_button & sensor will need to be recreated immediately
    • Garage door, window blind, door, window, valve, tap, lock and switch-valve simulations will continue to work for now but will need to be recreated at some point in the future
  • ⚠️ Eachen GD-DC5 devices no longer need to be setup as a simulation if this deviceModel is chosen in the configuration
• Outlet Devices
  • ⚠️ Will now be exposed by default as Switch, use the 'Show As' setting to change back to Outlet if needed
• Homebridge UI
  • More interactive - device configuration will expand once device ID and model entered
  • Device configuration options will now hide/show based on the deviceModel field
• Startup Logging
  • Accessory configuration options will be logged regardless of logging level
• iFan Devices
  • Previous fan speed will be used again after turning off and on
• Polling
  • Polling for power/temperature/humidity readings increased to two minutes
  • Polling for power/temperature/humidity readings will be skipped if device is marked as offline
• Configuration
  • sensorTimeDifference minimum reduced to 5 seconds and default reduced to 60 seconds
• Dependencies
  • Recommended node version bump to v14.17.3
  • Bump ws dependency to v7.5.2

Fixed

• An issue preventing controlling a garage door simulation when using a sensor
• An issue with the DUALR3 in motor mode hanging on 'Closing...' or 'Opening...'
• Fixed the multiple notifications when closing an Eachen device garage door
• A RangeError error which caused HOOBS bridge to restart

Removed

• overrideDisabledLogging setting for each accessory type
• outletDevices[] configuration section
• switchDevices[].showAsOutlet removed - use switchDevices[].showAs instead
• ContactSensorState and other unneeded characteristics from garage (simulation) services

6.8.0 (2021-06-14)

Added

• Accessory Simulations
  • Expose a single/multi channel device as any type of sensor
  • Expose a single/multi channel device an Air Purifier
  • Expose a TH10/16 device as a Cooler
  • Expose a TH10/16 device as a Humidifier
  • Expose a TH10/16 device as a Dehumidfier
• LAN Mode
  • Enabled for TH10/16 (requires firmware 3.5.0)
• Plugin UI
  • Show MAC address of accessory in plugin-ui

Changed

• TH10/16 simulation accessory type change from Thermostat to Heater

Removed

• Remove setup config option for simulations as device type is now automatically determined

Fixed

• Fix a logging issue for the zigbee contact sensor

6.7.1 (2021-05-27)

Fixed

• Fixes an issue with sensors with a garage simulation
• Fixes an issue with TH10/16 devices with web socket timeouts

6.7.0 (2021-05-26)

Added

• Hide a contact sensor from HomeKit when used with a garage door simulation
• Support devices with eWeLink UIID 112, 113, 114

Changed

• Avoid repeated battery logging for the Sonoff DW2
• iFan logging modifications
• Throw an error when controlling a device when the web socket is closed (avoid queuing updates)
• Recommended node version bump to v14.17.0
• Bump ws dependency to v7.4.6
• Use standard-prettier code formatting

Fixed

• Fix internal API auth issue when using a base64 encoded password

6.6.0 (2021-05-10)

Added

• Log internal API requests when in debug mode
• Support querying temperature and humidity values via the internal API

Changed

• Display temperature and humidity units for the zigbee temperature/humidity sensor in the logs
• Reduce the 'No Response' timeout to 2 seconds
• Update the correct corresponding characteristic after the 'No Response' timeout
• Ensure user is using at least Homebridge v1.3.0
• Update homebridge-ui wiki links to match github readme file

Removed

• Removed encodedPassword and language config options
  • The plugin will now initially try the supplied password and if incorrect will attempt another login with a base64 decoded version
• Language option unnecessary until if and when other languages are available

Fixed

• Fixes an issue where the web socket would not close on plugin shutdown

6.5.1 (2021-05-07)

Changed

• Amendments to internal API endpoints
• Device IP changes will now reflect correctly

Fixed

• Fixes an initialisation issue with the 'garage' and 'obstruction detection' switch simulations

6.5.0 (2021-05-06)

Added

• Internal HTTP API to query/control the state of certain homebridge-ewelink accessories
  • Options for new configuration setting apiPort are:
    • 0 to disable the API (default setting)
    • 1 to enable the API with a random available port (port will be shown in the log)
    • Any higher integer to enable the API on this fixed port
  • Documentation for the API can be seen at the base url (Homebridge IP + API port)

6.4.0 (2021-05-04)

Added

• Power, voltage and current readings for DUALR3 when exposed as outlets
• RF Bridge remote buttons will turn on for 3 seconds in HomeKit when pressed
• Link a Zigbee contact sensor to a single garage door to report the garage door state
• Set a temperature offset for the Zigbee temperature/humidity sensor
• Configuration options to manually set account http host and country code #249

Changed

• Change Sonoff POWR2/S31 polling interval to a fixed 60 seconds
• iFan speed will now log as {low, medium, high}
• Remove 'Outlet In Use' characteristics for outlets that don't support power readings
• Remove Eve power characteristics for outlets that don't support power readings
• More language strings added to separate language file
• Accessory 'identify' function will now add an entry to the log
• Backend refactoring, function and variable name changes

6.3.0 (2021-04-28)

Added

• Support DUALR3 motor mode (as a WindowCovering service)

Changed

• Remove old Switch services from DUALR3 when in motor mode
• iFan devices now use caching to avoid unnecessary duplicate updates
• Increase ws timeout from 5 to 6 seconds
• Decrease lan-only timeout from 10 to 9 seconds

6.2.2 (2021-04-27)

Changed

• Adjust iFan speed thresholds (now 0% is off, 1-33% is low, 34-66% is medium and 67-100% is high)
• Changed commands for multi-channel devices to only update desired channel (not all channels)
• Pause Adaptive Lighting if device is offline
• Automatically retry eWeLink login on startup in case of certain error codes
• Update package description (remove 'with original firmware' as this is redundant for eWeLink devices)

6.2.1 (2021-04-18)

Changed

• Trim new lines and spaces from password when decoded from base64
• Updated dependencies (ws)

6.2.0 (2021-04-16)

Added

• LAN mode for Sonoff RF Bridge

Changed

• More compact logging for eWeLink 504 error
• Recover accessories from the cache using the UUID
• Reduce WS timeout to 5 seconds to reduce cases of was slow to respond HB warning
• Update wiki links in the Homebridge plugin-ui

Removed

• Remove online/offline status for Zigbee sensor devices

Fixed

• Fix characteristic NaN warning for LastActivation

6.1.2 (2021-04-14)

Fixed

• Remove any existing humidity sensor for TH10/16 if DS18B20 sensor is used

6.1.1 (2021-04-13)

Fixed

• Fixed an unhandled rejection error when controlling certain CCT bulbs

6.1.0 (2021-04-12)

Added

• Support for doorbell model SA-026 (can be exposed as any sensor type as per other RF sensors)
• Updated plugin-ui 'Support' page links to match GitHub readme file

Changed

• Improvements to RF Bridge:
  • No more characteristic warnings for LastActivation for motion and contact sensors
  • Removed logs for 'not triggered' if device has since been triggered again

6.0.3 (2021-04-08)

Fixed

• Revert 'No Response' messages for DW2 devices as they go on and offline
• Fixed the interval time length for calculating total energy consumption for relevant devices

6.0.2 (2021-04-07)

Changed

• Revert 'No Response' messages for DW2 devices as they go on and offline

6.0.1 (2021-04-07)

Requirements

• Homebridge Users

  • This plugin has a minimum requirement of Homebridge v1.3.3

• HOOBS Users

  • This plugin has a minimum requirement of HOOBS v3.3.4

Changed

• 'No Response' messages for Zigbee and DW2 devices as they go on and offline
• 'No Response' messages for all devices if controlled and unsuccessful (and this status will be reverted after 5 seconds)
• Use the new .onGet/.onSet methods available in Homebridge v1.3
• Updated README to reflect minimum supported Homebridge/HOOBS and Node versions
• Updated recommended Node to v14.16.1

Fixed

• Fixes a caching issue with the iFan accessory

5.6.0 (2021-03-25)

Added

• Enter your eWeLink password as a base64 encoded string and use the option encodedPassword to let the plugin know (#223)
• Support for zigbee colour temperature lights (ewelink uiid 1258) (#222), including:
  • Ikea Tradfri E14 600 lumen

Changed

• Improvements to web socket connection: (#224)
  • On startup, the plugin will wait to connect to the web socket before initialising devices
  • A new web socket address will be requested if the provided address causes errors
  • In particular this should fix the ENOTFOUND as-pconnect4.coolkit.cc error that some users in the Asia continent were receiving

5.5.1 (2021-03-21)

Changed

• Remove the custom minValue for CurrentTemperature characteristic
• More welcome messages
• Updated plugin-ui-utils dependency

5.5.0 (2021-03-17)

Added

• Enable LAN control for the Sonoff SV
• Log entries will show for 'uncontrollable' devices if mode:lan on plugin startup
• Log entries to highlight unnecessary top-level configuration options you may have set
• Added a note in the plugin settings about changing RF bridge sensors and its consequences

Changed

• Remove country code configuration option as the plugin can determine your region automatically
• Modified config schema to show titles/descriptions for non Homebridge UI users
• Automatically show useful info in logs for 'yet to implement' devices
• Updated links on plugin-ui to match GitHub wiki
• [backend] Eve characteristics abstracted into separate file for better efficiency

5.4.0 (2021-03-14)

Added

• The plugin now differentiates between LAN support for incoming and outgoing updates, allowing incoming updates for:
  • TH10/16
  • B02 and B05 bulbs

Fixed

• Attempt to fix outlet polling updates so the device reports updated info rather than the previous info.

5.3.0 (2021-03-10)

Added

• Set up a polling interval for outlet devices to obtain power information on a regular basis (useful when the device doesn't automatically send frequent updates)

Changed

• Adaptive Lighting now requires Homebridge 1.3 release
• Garages no longer need 'dummy' contact sensor to view Eve history
  • For this reason, the exposeContactSensor setting is now redundant and so has been removed
• Outlet intervals for energy calculation and updates will stop on Homebridge shutdown

5.2.0 (2021-03-08)

Added

• Accessory Simulations
  • Expose an optional contact sensor for Eachen garage devices for historical data in the Eve app
  • Set custom minimum/maximum target temperatures for the TH10/16 thermostat simulation

Changed

• Specify a custom IP for the Sonoff D1
• Show full error stack on plugin disable in debug mode
• Updated dependencies

Fixed

• Fixes a multiple callback error with CCT bulb accessories

5.1.1 (2021-03-02)

Fixed

• Fixes an issue sending LAN updates to multi-channel devices

5.1.0 (2021-03-02)

Added

• Accessory Simulations
  • Added Door service type simulation
  • Added Window service type simulation
  • [experimental] Specify different operation time for UP and DOWN for garages, blinds, doors and windows
• Accessories
  • Support for Sonoff DUALR3
  • Support for Konesky Mosquito Killer
  • Support for Sonoff SC (Sensor Centre)
  • [experimental] Support for Sonoff D1 LAN control

Changed

• Less strict threshold for determining a 'significant' colour change for disabling Adaptive Lighting

5.0.6 (2021-02-26)

Fixed

• Removes the extra Switch service that was accidentally added to certain bulbs

5.0.5 (2021-02-25)

Changed

• Reverse the polarity of the leak sensor simulation
  • You can expose a DW2 sensor as a leak sensor using this guide as an Accessory Simulation

5.0.4 (2021-02-24)

Changed

• Plugin will check that certain Accessory Simulations have been setup with the device type
• Hide IP address field in plugin settings if plugin mode is set to wan

5.0.3 (2021-02-24)

Changed

• Remove old Switch services when setting up Accessory Simulations
• Add the type of Accessory Simulation to the logged options on restart

5.0.2 (2021-02-24)

Fixed

• Fixes an issue initialising Accessory Simulation Lock devices

5.0.1 (2021-02-24)

Fixed

• Fixes an issue initialising Contact Sensor devices

5.0.0 (2021-02-24)

• ⚠️ This release includes an overhaul of the settings in particular to specific device configuration
• The following options have been replaced:
  • hideChanFromHB, switchAsOutlet, outletAsSwitch, inUsePowerThreshold, hideLightFromFan, hideSwitchFromTH, thAsThermostat, resetRFBridge, lowBattThreshold, sensorTimeDifference, bulbB02BA60, bulbB02FST64, thTempOffset, hideZBLDPress, ZBDWBatt, ipOverride
• If you use any of the above options then please take some time to review the changes after updating the plugin
• Detailed information about the changes can be seen here

Added

• Configuration
  • The ability to explicitly enable device logging per device if you have disableDeviceLogging set to true
  • A label setting per device group which has no effect except to help identify the device when editing the configuration
  • New brightnessStep option to specify a minimum brightness step in the Home app per dimmer/bulb/LED strip
  • New adaptiveLightingShift option to offset the Adaptive Lighting values per bulb
  • showAsOutlet option extended multi-channel switch and light switch devices to expose them as outlets
• Accessories
  • Enhanced Eve information available for contact sensors:
    • DW2
    • Zigbee Contact Sensor
• Accessory Simulations
  • Expose a DW2 contact sensor as a leak sensor
  • Sub-accessories will be removed automatically when setting up a new Accessory Simulation
• Homebridge Plugin UI
  • 'My Devices' shows a red/green icon on the to show device WAN/LAN reachability
  • 'My Devices' shows the firmware version for your device
• New Devices
  • Support for eWeLink switch uiid 81, 82, 83, 84 and 107 device types
  • Support for the 'Sonoff Hum' humidifier device (on/off and mode)

Changed

• New plugin configuration format - more info
• Device firmware version will now show correctly in HomeKit apps
• Information about error 406 added to the logs in the form of a link (shown when error is received)
• Updated minimum Node to v14.16.0

Fixed

• Fixes a characteristic warning for MotionDetected for Zigbee Motion Sensors

4.7.6 (2021-02-17)

Fixed

• Fixes an issue with the DW2 detecting garage door states

4.7.5 (2021-02-15)

Changed

• Fixes an issue with the DW2 detecting garage door states

4.7.4 (2021-02-15)

Fixed

• Fixes an issue when using custom RF sensors

4.7.3 (2021-02-13)

Changed

• Hide WS messages that have no useful information about a device
• Thermostat accessory simulation will now setup after a small delay to let the accessory initialise first
• Thermostat device will now suggest changing temperature scale from F to C in the eWeLink app
• Changes to colour conversion:
  • Lighter colours appear brighter
  • Solid red is now easier to obtain via the Home app

4.7.2 (2021-02-12)

Fixed

• Fixes a bug where config items separated by a comma weren't adhered to properly
• Stop subsequent warning messages if a device fails to initialise

4.7.1 (2021-02-11)

Changed

• The 'auto' and 'cool' modes will now be hidden for thermostat devices in the Eve app
• Added a 10 second timeout when sending web socket messages
• Updated dependencies:
  • websocket-as-promised to v2.0.1
• Fakegato library formatting and simplification

Fixed

• Fixed a bug when initialising lock accessory simulations

4.7.0 (2021-02-10)

Added

• Support for the eWeLink thermostat device type
• A queue for device updates to improve reliability, this also results in:
  • Faster device updates for colour bulbs and diffusers
• Configuration checks to highlight in the logs any unnecessary or incorrectly formatted settings you have
• Added a note in the plugin UI when adding an Accessory Simulation that the accessory will need to be removed from the cache
• Links to 'Configuration' and 'Uninstall' wiki pages in the plugin-ui

Changed

• ⚠️ ignoredDevices configuration option is now an array not a string - see details
• Reinstated ipOverride into the Homebridge plugin UI screen
• Improved colour temperature conversion for L1 and L1 Lite devices
• HTTP error codes will be displayed in the logs if and when the plugin re-attempts the connection
• Error messages refactored to show the most useful information
• [Backend] Major code refactoring
• [Backend] Code comments
• Updated minimum Node to v14.15.5
• Updated minimum Homebridge to v1.1.7
• Updated dependencies

Removed

• Removed nameOverride configuration option - the plugin can now obtain channel names from eWeLink
• Removed resetRFBridge option - the same usage can be achieved with ignoredDevices

Fixed

• Fixed a bug where Adaptive Lighting would not be disabled if the colour was changed from the eWeLink app
• Fixed an issue with the 'Lock' Accessory Simulation where the status would never update as 'Unlocked'

4.6.1 (2021-02-02)

Changed

• Extra debug logging for WS reconnection status
• Updated ws dependency to v7.4.3

4.6.0 (2021-01-30)

Added

• [Experimental] Use a TH10/16 device as a thermostat using an Accessory Simulation more info
• Support for the Zigbee type white bulb

Changed

• Updated plugin-ui-utils dep and use new method to get cached accessories
• Increase the timeout for LAN control to 10 seconds for LAN only settings
• Show LAN update errors in the log

4.5.1 (2021-01-28)

Changed

• Set the switch as the primary service of a TH10/16 device
• Only show the line in error logs if it exists (no more [line undefined])

Fixed

• Fixes an issue where RF sensors would not use a custom defined type (again!)

4.5.0 (2021-01-28)

Added

• Use a switch to control the Obstruction Detected feature of a garage door

Changed

• More consistent and clearer error logging

Fixed

• Fix for TH10/16 devices when the HomeKit switch would show the state of 'auto' mode
• Fix for TH10/16 devices (shown as thermostat) where the plugin would not show the current state of the device
• Fix for the display of watts/amps/volts for outlets that support this

4.4.5 (2021-01-24)

Fixed

• Fix where the battery for DW2 device would not update

4.4.4 (2021-01-24)

Changed

• Backend - better handling of errors

4.4.3 (2021-01-20)

Fixed

• Fixes an issue where RF sensors would not use a custom defined type

4.4.2 (2021-01-20)

Changed

• Minimum Homebridge beta needed for Adaptive Lighting bumped to beta-46

Fixed

• Fixes an issue when adding new RF bridge devices

4.4.1 (2021-01-20)

Changed

• Fakegato logging disabled in Homebridge debug mode, can be explicitly enabled with debugFakegato

4.4.0 (2021-01-14)

Added

• Single Accessory Simulations for multi-channel devices (e.g. 1 valve using a Sonoff 4CH)
• operationTime for Accessory Simulations will now be validated and increased to 20 if less than 20 or an invalid number

Changed

• ⚠️ Accessory Simulations - if use '1 Lock', '1 Tap/Faucet' or '1 Valve' you will need to update your configuration with the Device Setup field (via Homebridge UI) or adding the line "setup": "oneSwitch" directly to your configuration file in the groups section
• Changes to plugin now in CHANGELOG.md

Removed

• Removed Obstruction Detected tests

4.3.0 (2021-01-12)

Added

• New Accessory Simulations:
  • 2 Taps/Faucets using a multi-channel device
  • 4 Irrigation Valves using a multi-channel device #182
• New disableDeviceLogging config option to hide device state logging #183

Changed

• hideDevFromHB config option renamed to ignoredDevices
• Minimum operationTime for associated Accessory Simulations increased to 20 (2 seconds)
• Removal of maximum values on plugin settings screen for all number types
• Changes to startup log messages
• Adaptive lighting minimum Homebridge beta version is now beta-42
• Backend code changes
• Updated dependencies