Unlocking full transmission power

Enable 700mW or 1200mW output power for the DJI FPV System

The Quick way

Install the fcc-unlock package to your Airunits and Goggles either by using the configurator, or by downloading the ipk from [here] and following [these] instructions to install.

The Manual Way

These instructions do not require rooting and are here only for reference purposes. The increased power output only applies when using an Air Unit or Vista, not for the DJI FPV drone.

First, to enable up to 700mW output:

• Download naco.txt
• In case of Air Unit, insert SD Card
• Power Up Air Unit/Vista
• Connect Air Unit/Vista to PC via USB
• Wait for Air Unit/Vista drive to appear on PC
• Place naco.txt downloaded earlier into the root of the Air Unit/Vista drive
• Restart Air Unit/Vista

Then, to further enable up to 1200mW output:

• Download naco_pwr.txt
• Place SD card in Goggles
• Power up Goggles
• Connect Goggles to PC via USB
• Wait for Goggles SD card to appear on PC
• Place naco_pwr.txt downloaded earlier into the root of the Goggles SD card
• Restart Goggles

Please make sure you're following any local laws when it comes to the appropriate output power.