From c9718e1ec0570a96bd104cd4bbefed57cc613d5d Mon Sep 17 00:00:00 2001 From: Augusto Zanellato Date: Tue, 19 Oct 2021 17:24:22 +0200 Subject: [PATCH] =?UTF-8?q?=E2=9C=A8=20Eryone=20Ery32=20mini=20(STM32F103V?= =?UTF-8?q?ET6)=20board=20(#22956)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/core/boards.h | 1 + Marlin/src/pins/pins.h | 2 + .../src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h | 195 ++++++++++++++++++ .../PlatformIO/ldscripts/eryone_ery32_mini.ld | 14 ++ .../variants/marlin_MEEB_3DP/ld/mem-flash.inc | 4 +- ini/stm32f1-maple.ini | 19 ++ 6 files changed, 233 insertions(+), 2 deletions(-) create mode 100644 Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h create mode 100644 buildroot/share/PlatformIO/ldscripts/eryone_ery32_mini.ld diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index dd08f6a1b495..82fd51e2a31f 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -355,6 +355,7 @@ #define BOARD_ZONESTAR_ZM3E2 4055 // Zonestar ZM3E2 (STM32F103RCT6) #define BOARD_ZONESTAR_ZM3E4 4056 // Zonestar ZM3E4 V1 (STM32F103VCT6) #define BOARD_ZONESTAR_ZM3E4V2 4057 // Zonestar ZM3E4 V2 (STM32F103VCT6) +#define BOARD_ERYONE_ERY32_MINI 4058 // Eryone Ery32 mini (STM32F103VET6) // // ARM Cortex-M4F diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 14a13219dd12..15794641ca5b 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -571,6 +571,8 @@ #include "stm32f1/pins_ZM3E4_V1_0.h" // STM32F1 env:STM32F103VC_ZM3E4_USB env:STM32F103VC_ZM3E4_USB_maple #elif MB(ZONESTAR_ZM3E4V2) #include "stm32f1/pins_ZM3E4_V2_0.h" // STM32F1 env:STM32F103VE_ZM3E4V2_USB env:STM32F103VE_ZM3E4V2_USB_maple +#elif MB(ERYONE_ERY32_MINI) + #include "stm32f1/pins_ERYONE_ERY32_MINI.h" // STM32F103VET6 env:ERYONE_ERY32_MINI_maple // // ARM Cortex-M4F diff --git a/Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h b/Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h new file mode 100644 index 000000000000..7ce21a20afbd --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h @@ -0,0 +1,195 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Eryone Ery32 mini (STM32F103VET6) board pin assignments + */ + +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Eryone Ery32 mini supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "ERYONE Ery32 mini" +#endif + +//#define DISABLE_DEBUG +#define DISABLE_JTAG +//#define ENABLE_SPI3 +#define FLASH_EEPROM_EMULATION +#define FAN_SOFT_PWM + +#if ENABLED(FLASH_EEPROM_EMULATION) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB + #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) + #define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE) +#endif + +// +// Servos +// +#define SERVO0_PIN PA12 + +// +// Limit Switches +// +#define X_STOP_PIN PD8 +#define Y_STOP_PIN PD15 +#define Z_MIN_PIN PA11 +//#define Z_MAX_PIN PB1 + +// +// Steppers +// +#define X_STEP_PIN PB15 +#define X_DIR_PIN PB14 +#define X_ENABLE_PIN PD10 + +#define Y_STEP_PIN PD14 +#define Y_DIR_PIN PD13 +#define Y_ENABLE_PIN PC6 + +#define Z_STEP_PIN PC8 +#define Z_DIR_PIN PC7 +#define Z_ENABLE_PIN PA8 + +#define E0_STEP_PIN PE13 +#define E0_DIR_PIN PE14 +#define E0_ENABLE_PIN PB13 + +//#define E1_STEP_PIN PD13 +//#define E1_DIR_PIN PD12 +//#define E1_ENABLE_PIN PC6 + +// +// Heaters 0,1 / Fans / Bed +// +#define HEATER_0_PIN PD11 + +#if ENABLED(FET_ORDER_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN PD12 +#elif ENABLED(FET_ORDER_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN PD4 +#elif ENABLED(FET_ORDER_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN PD4 + #define HEATER_BED_PIN PD12 +#elif ENABLED(FET_ORDER_EFF) // Hotend, Fan, Fan + #define FAN1_PIN PD12 +#elif DISABLED(FET_ORDER_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") + #define HEATER_BED_PIN PD12 + #if EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) + #define HEATER_1_PIN PB9 + #else + #define FAN1_PIN PB9 + #endif +#endif + +#ifndef FAN_PIN + #if EITHER(FET_ORDER_EFB, FET_ORDER_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan + #define FAN_PIN PB5 + #elif EITHER(FET_ORDER_EEF, FET_ORDER_SF) // Hotend, Hotend, Fan or Spindle, Fan + #define FAN_PIN PD12 + #elif ENABLED(FET_ORDER_EEB) // Hotend, Hotend, Bed + #define FAN_PIN -1 // IO pin. Buffer needed + #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") + #define FAN_PIN PB5 + #endif +#endif + +// +// Misc. Functions +// +//#define PS_ON_PIN PB9 + +#if HAS_TMC_UART + /** + * TMC2208/TMC2209 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + #define X_HARDWARE_SERIAL MSerial4 + #define Y_HARDWARE_SERIAL MSerial4 + #define Z_HARDWARE_SERIAL MSerial4 + #define E0_HARDWARE_SERIAL MSerial4 + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 2 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 3 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 1 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 0 + #endif +#endif +// +// Temperature Sensors +// +#define TEMP_BED_PIN PC2 //TB +#define TEMP_0_PIN PC1 //TH1 +//#define TEMP_1_PIN PC3 //TH2 +#define TEMP_BOARD_PIN PC3 +#ifndef TEMP_SENSOR_BOARD + #define TEMP_SENSOR_BOARD 13 +#endif +#define FIL_RUNOUT_PIN PA10 // MT_DET + +// +// LCD Pins +// +#if HAS_WIRED_LCD + #define BEEPER_PIN PE12 + #define BTN_ENC PE11 + #define LCD_PINS_ENABLE PE10 + #define LCD_PINS_RS PE9 + #define BTN_EN1 PE4 + #define BTN_EN2 PE3 + #define LCD_PINS_D4 PE8 + #define LCD_PINS_D5 PE7 + #define LCD_PINS_D6 PB2 + #define LCD_PINS_D7 PB1 + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #define BOARD_ST7920_DELAY_1 50 + #define BOARD_ST7920_DELAY_2 50 + #define BOARD_ST7920_DELAY_3 50 + +#endif // HAS_WIRED_LCD + +// +// SD Card +// +#define ENABLE_SPI1 +#define SD_DETECT_PIN PA4 +#define SCK_PIN PA5 +#define MISO_PIN PA6 +#define MOSI_PIN PA7 +#define SS_PIN PC4 diff --git a/buildroot/share/PlatformIO/ldscripts/eryone_ery32_mini.ld b/buildroot/share/PlatformIO/ldscripts/eryone_ery32_mini.ld new file mode 100644 index 000000000000..04585742569e --- /dev/null +++ b/buildroot/share/PlatformIO/ldscripts/eryone_ery32_mini.ld @@ -0,0 +1,14 @@ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 4K + rom (rx) : ORIGIN = 0x08004000, LENGTH = 512K - 16K +} + +/* Provide memory region aliases for common.inc */ +REGION_ALIAS("REGION_TEXT", rom); +REGION_ALIAS("REGION_DATA", ram); +REGION_ALIAS("REGION_BSS", ram); +REGION_ALIAS("REGION_RODATA", rom); + +/* Let common.inc handle the real work. */ +INCLUDE common.inc diff --git a/buildroot/share/PlatformIO/variants/marlin_MEEB_3DP/ld/mem-flash.inc b/buildroot/share/PlatformIO/variants/marlin_MEEB_3DP/ld/mem-flash.inc index ddb8876fa5d2..75030ec01a89 100644 --- a/buildroot/share/PlatformIO/variants/marlin_MEEB_3DP/ld/mem-flash.inc +++ b/buildroot/share/PlatformIO/variants/marlin_MEEB_3DP/ld/mem-flash.inc @@ -1,5 +1,5 @@ MEMORY { - ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K - rom (rx) : ORIGIN = 0x08005000, LENGTH = 492K + ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 64K - 3K + rom (rx) : ORIGIN = 0x08005000, LENGTH = 512K - 20K } diff --git a/ini/stm32f1-maple.ini b/ini/stm32f1-maple.ini index e11aa035601f..f86bf98ebdc5 100644 --- a/ini/stm32f1-maple.ini +++ b/ini/stm32f1-maple.ini @@ -400,3 +400,22 @@ board = genericSTM32F103VE board_build.ldscript = ZONESTAR_ZM3E_512K.ld build_flags = ${ZONESTAR_ZM3E_maple.build_flags} -DTONE_TIMER=1 -DTONE_CHANNEL=2 board_upload.maximum_size = 499712 + +# +# ERYONE ERY32 Mini (STM32F103VET6) +# +[env:ERYONE_ERY32_MINI_maple] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103VE +build_flags = ${common_stm32f1.build_flags} + -ffunction-sections -fdata-sections -nostdlib -MMD + -DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -O0 + -DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 + -DSS_TIMER=4 +board_build.variant = MARLIN_F103Vx +board_build.ldscript = eryone_ery32_mini.ld +board_build.address = 0x08004000 +build_unflags = ${common_stm32f1.build_unflags} +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/custom_board.py