+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
If you click on the name of the image file you will see a preview of the image.
-
+
**What are these other files?**
@@ -43,11 +43,11 @@ The **`arxiv.sty`** file is a style file that contains code more specifically st
To upload an image file to add a new figure, you can click on the new file button, which is the icon that looks like a piece of paper with the right upper corner folded.
-
+
Then select the upload button to drag and drop a new image file from your computer.
-
+
The next step to add this new figure to your document, is to add the code above but modified so that the name of the image file matches the name of the file you uploaded.
@@ -63,16 +63,16 @@ As when adding figures, you need the `\begin{}` and `\end{}` commands in your fi
Here is all of the code to create the following table. We will go through each command and explore what it does to create the table.
-
+
-
+
We can add a caption using the `\caption{}` command. The table number will automatically be determined by the order of the tables. As before with the figure, the `\centering` command will then align the resulting table to be centered.
-
+
@@ -80,50 +80,50 @@ We can add a caption using the `\caption{}` command. The table number will autom
To create the table in the template, we will first indicate how we want the table arranged using the `tabular` environment. The command `\begin{tabular}{lll}` indicates that we will have three columns that are left aligned.
-
+
- The `\toprule` command adds a solid line at the top of the table. If you add this command again you will see two lines - test it out to see how it works!
-
+
- The command `\multicolumn{2}{c}{Part}\\` indicates that will will merge some columns together to create a "multicolumn" in this case the `{2}` means we will merge together 2 columns, the `{c}` indicates that it will be center aligned and the `{Part}` is the text we want for this. We need the `\\` to finish that row, otherwise "Part" will end up on the next row.
-
+
The `\cmidrule` command adds the line or "rule" under the multicolumn that says "Part". This command creates lines that are not the full width of the table. The `(r) {1-2}` indicates that the line should be trimmed on the right side to leave a gap after the span of 2 column widths.
-
+
Now we are ready to put some text within our table cells. We can simply type the words with an `&` in between the text for each cell to indicate where the column breaks are. The `\\` indicates when we are done with that row. Since we have a special character to represent mu, we can use mathematical notation by using a dollar sign `$`.
-
+
To add a line under these values, we can use the `\midrule` command.
-
+
To add more text within the rows after this line, we simply type words, using an `&` to indicate column breaks and the `\\` to indicate the end of the row. The `$` is also used to create mathematical notations.
-
+
To add the line at the bottom, we need to use a command that is similar to `toprule{}` and `midrule{}` which is `bottomrule{}`.
-
+
Now we just need to finish off our table.
First we need to get out of the tabular mode, so we will use our trusty `\end{}` function. In this case, we end with `\end{tabular}`. To end the table overall, we use `\end{table}`. We will discuss what the `\label{}` function does soon.
-
+
To add the line at the bottom, we again use `\bottomrule{}`.
-
+
## Creating internal links
@@ -139,13 +139,13 @@ You also need to have the same notation for each type:
- `fig:` for figures
- `sec:` for section headers
-
+
Here we will create a new link for the introduction. We first need to add a label to the introduction using the `label{}` function. We will call it `intro` and we need to specify that this is a section header with `sec` , like so: `label{sec:intro}`.
We then need to refer to this in the same way somewhere else using the `ref{}` function, like so: `ref{sec:intro}`. This will create a link to that section.
-
+
## References
@@ -161,13 +161,13 @@ The first part of the bib item will indicate what to refer to it in the text to
This results in a citation number and a link to the reference.
-
+
To add a bibliography, we can just undo the comment in front of the bibliography command. This is sufficient to create the bibliography. The code after this in the template to create each reference individually is not needed.
-
+
## Conclusion
diff --git a/docs/06-troubleshooting.md b/docs/06-troubleshooting.md
index d2a0ea0a..cd73314f 100644
--- a/docs/06-troubleshooting.md
+++ b/docs/06-troubleshooting.md
@@ -3,20 +3,20 @@
Overleaf has lots of ways to make writing in LaTeX easier. In this chapter we will cover several of these ways, as well as how to identify and fix a problem if you encounter one.
-
+
## Code Suggestions
As you type code, Overleaf makes code suggestions based on what you have already typed. You can click on a suggestion to use it. Overleaf will also offer suggestions on what to put within command brackets. This can be great if you can't quite remember what a command is or if you are trying to write a document faster.
-
+
## Symbol Palette
If you need to use many symbols or mathematical notations in your work, the symbol palette can be very helpful. You can access it by pressing the button that looks like an omega symbol at the top of the source editor.
-
+
## History
@@ -27,7 +27,7 @@ Here you will see the most recent changes as slices of changes overtime. Changes
If you are using the comparison mode you will see the changes and who made them. However, you can also just look at the files from a specific point in time without seeing changes by clicking on the "view single version" button.
-
+
For more information about using the history features of Overleaf, see this [documentation](https://www.overleaf.com/learn/latex/Using_the_History_feature) @overleaf_history.
@@ -39,7 +39,7 @@ The link button at the top of each message will take you to the line of the file
Hovering on the red circle right next to the line number will show you information about what might be wrong with that line.
-
+
## Trouble Compiling
@@ -54,7 +54,7 @@ Keep in mind that sometimes an error happens earlier than where a red circle is
Here is an example of brackets that were not closed on line 76 where the yellow triangle is, but the red circle shows up on the next line because Overleaf expects you to close it here.
-
+
+
Then select the upload button to drag and drop a new image file from your computer.
-
+
The next step to add this new figure to your document, is to add the code above but modified so that the name of the image file matches the name of the file you uploaded.
@@ -63,16 +63,16 @@ As when adding figures, you need the `\begin{}` and `\end{}` commands in your fi
Here is all of the code to create the following table. We will go through each command and explore what it does to create the table.
-
+
-
+
We can add a caption using the `\caption{}` command. The table number will automatically be determined by the order of the tables. As before with the figure, the `\centering` command will then align the resulting table to be centered.
-
+
@@ -80,50 +80,50 @@ We can add a caption using the `\caption{}` command. The table number will autom
To create the table in the template, we will first indicate how we want the table arranged using the `tabular` environment. The command `\begin{tabular}{lll}` indicates that we will have three columns that are left aligned.
-
+
- The `\toprule` command adds a solid line at the top of the table. If you add this command again you will see two lines - test it out to see how it works!
-
+
- The command `\multicolumn{2}{c}{Part}\\` indicates that will will merge some columns together to create a "multicolumn" in this case the `{2}` means we will merge together 2 columns, the `{c}` indicates that it will be center aligned and the `{Part}` is the text we want for this. We need the `\\` to finish that row, otherwise "Part" will end up on the next row.
-
+
The `\cmidrule` command adds the line or "rule" under the multicolumn that says "Part". This command creates lines that are not the full width of the table. The `(r) {1-2}` indicates that the line should be trimmed on the right side to leave a gap after the span of 2 column widths.
-
+
Now we are ready to put some text within our table cells. We can simply type the words with an `&` in between the text for each cell to indicate where the column breaks are. The `\\` indicates when we are done with that row. Since we have a special character to represent mu, we can use mathematical notation by using a dollar sign `$`.
-
+
To add a line under these values, we can use the `\midrule` command.
-
+
To add more text within the rows after this line, we simply type words, using an `&` to indicate column breaks and the `\\` to indicate the end of the row. The `$` is also used to create mathematical notations.
-
+
To add the line at the bottom, we need to use a command that is similar to `toprule{}` and `midrule{}` which is `bottomrule{}`.
-
+
Now we just need to finish off our table.
First we need to get out of the tabular mode, so we will use our trusty `\end{}` function. In this case, we end with `\end{tabular}`. To end the table overall, we use `\end{table}`. We will discuss what the `\label{}` function does soon.
-
+
To add the line at the bottom, we again use `\bottomrule{}`.
-
+
## Creating internal links
@@ -139,13 +139,13 @@ You also need to have the same notation for each type:
- `fig:` for figures
- `sec:` for section headers
-
+
Here we will create a new link for the introduction. We first need to add a label to the introduction using the `label{}` function. We will call it `intro` and we need to specify that this is a section header with `sec` , like so: `label{sec:intro}`.
We then need to refer to this in the same way somewhere else using the `ref{}` function, like so: `ref{sec:intro}`. This will create a link to that section.
-
+
## References
@@ -161,13 +161,13 @@ The first part of the bib item will indicate what to refer to it in the text to
This results in a citation number and a link to the reference.
-
+
To add a bibliography, we can just undo the comment in front of the bibliography command. This is sufficient to create the bibliography. The code after this in the template to create each reference individually is not needed.
-
+
## Conclusion
diff --git a/docs/06-troubleshooting.md b/docs/06-troubleshooting.md
index d2a0ea0a..cd73314f 100644
--- a/docs/06-troubleshooting.md
+++ b/docs/06-troubleshooting.md
@@ -3,20 +3,20 @@
Overleaf has lots of ways to make writing in LaTeX easier. In this chapter we will cover several of these ways, as well as how to identify and fix a problem if you encounter one.
-
+
## Code Suggestions
As you type code, Overleaf makes code suggestions based on what you have already typed. You can click on a suggestion to use it. Overleaf will also offer suggestions on what to put within command brackets. This can be great if you can't quite remember what a command is or if you are trying to write a document faster.
-
+
## Symbol Palette
If you need to use many symbols or mathematical notations in your work, the symbol palette can be very helpful. You can access it by pressing the button that looks like an omega symbol at the top of the source editor.
-
+
## History
@@ -27,7 +27,7 @@ Here you will see the most recent changes as slices of changes overtime. Changes
If you are using the comparison mode you will see the changes and who made them. However, you can also just look at the files from a specific point in time without seeing changes by clicking on the "view single version" button.
-
+
For more information about using the history features of Overleaf, see this [documentation](https://www.overleaf.com/learn/latex/Using_the_History_feature) @overleaf_history.
@@ -39,7 +39,7 @@ The link button at the top of each message will take you to the line of the file
Hovering on the red circle right next to the line number will show you information about what might be wrong with that line.
-
+
## Trouble Compiling
@@ -54,7 +54,7 @@ Keep in mind that sometimes an error happens earlier than where a red circle is
Here is an example of brackets that were not closed on line 76 where the yellow triangle is, but the red circle shows up on the next line because Overleaf expects you to close it here.
-
+
Remember, it is a good idea to press the "Recompile" button frequently, so that you can identify any errors more easily. If you wait too long to check, then you will have more new changes to look through to try to understand the error.
diff --git a/docs/07-collaborating.md b/docs/07-collaborating.md
index 238588eb..590b0dcb 100644
--- a/docs/07-collaborating.md
+++ b/docs/07-collaborating.md
@@ -5,7 +5,7 @@ Collaborating on Overleaf is much more doable if you have access to a [paid plan
## Learning Objectives
-
+
## Seeing collaborators
@@ -13,26 +13,26 @@ Different users will show up as a square with the first initial of their usernam
-
+
## Sharing
You can share a project with a collaborator (or with the world) similarly to a Google document. Just click on the share button and specify how you want people to access your project.
-
+
## Submitting
When you are ready to submit a document to a publisher, like a preprint to arXiv, you can do so using the `submit` button.
-
+
## Messages
You can send general messages using the "Chat" button.
-
+
## Review mode
@@ -41,22 +41,22 @@ If you press the "review" button, which is to the right of the "share" button, y
You will see a gray column open to the right of the source editor. Here you can add comments and toggle on and off the tracking of changes.
-
+
### Adding comments
You can also write comments about specific text by highlighting the text in review mode (by first pressing the review button) and then clicking "add comment".
-
+
Comments need to be verified to be posted. They can then be edited, resolved, or responded to.
-
+
Resolved comments can be found at the top left button in the review panel when in review mode.
-
+
## Conclusion
diff --git a/docs/08-github-sync.md b/docs/08-github-sync.md
index c1cfb266..d38ed467 100644
--- a/docs/08-github-sync.md
+++ b/docs/08-github-sync.md
@@ -12,21 +12,21 @@ We will not cover what GitHub is and how to use it in this chapter, but this [re
## Learning Objectives
-
+
To do so, you need to first click on the home button (looks like an icon of a house on the upper left) to go to the main menu (if you are not already there, this will be the case if you working on a project).
-
+
-Here you should see a list of any projects you have created or collabroated on.
+Here you should see a list of any projects you have created or collaborated on.
On the far upper right click on the "Account" button.
-
+
@@ -34,7 +34,7 @@ On the far upper right click on the "Account" button.
Then click on "Account Settings".
-
+
Next, scroll down to where you see the heading for "Project Synchronisation."
@@ -42,7 +42,7 @@ Next, scroll down to where you see the heading for "Project Synchronisation."
Click on the blue "Link" button next to the GitHub section.
-
+
If you already have a GitHub account, you will be asked to grant access.
@@ -54,15 +54,15 @@ To do so, first open the project that you would like to sync with GitHub from th
Next click the Overleaf menu button the far left upper corner.
-
+
Then scroll down to the "Sync" section.
-
+
The window that pops up about exporting the project to GitHub will then show up. This will create a new repository on GitHub with the files from your project.
-
+
## Syncing files
@@ -71,15 +71,15 @@ If you then make a change on GitHub and merge it with the main branch, you can p
To do so, navigate back to the Overleaf Menu in the project on the far left side.
-
+
Scroll back down to the sync section for GitHub.
-
+
You will see a window with buttons to sync changes back and forth from GitHub and Overleaf.
-
+
Now to get the change from GitHub you can press the "Pull GitHub changes into Overleaf" button.
diff --git a/docs/404.html b/docs/404.html
index 154daf33..7d060651 100644
--- a/docs/404.html
+++ b/docs/404.html
@@ -6,12 +6,11 @@
Page not found | Write Smarter with Overleaf and LaTeX
-
+
-
@@ -31,7 +30,6 @@
-
@@ -49,11 +47,16 @@
-
-
+
+
+
+
+
## Seeing collaborators
@@ -13,26 +13,26 @@ Different users will show up as a square with the first initial of their usernam
-
+
## Sharing
You can share a project with a collaborator (or with the world) similarly to a Google document. Just click on the share button and specify how you want people to access your project.
-
+
## Submitting
When you are ready to submit a document to a publisher, like a preprint to arXiv, you can do so using the `submit` button.
-
+
## Messages
You can send general messages using the "Chat" button.
-
+
## Review mode
@@ -41,22 +41,22 @@ If you press the "review" button, which is to the right of the "share" button, y
You will see a gray column open to the right of the source editor. Here you can add comments and toggle on and off the tracking of changes.
-
+
### Adding comments
You can also write comments about specific text by highlighting the text in review mode (by first pressing the review button) and then clicking "add comment".
-
+
Comments need to be verified to be posted. They can then be edited, resolved, or responded to.
-
+
Resolved comments can be found at the top left button in the review panel when in review mode.
-
+
## Conclusion
diff --git a/docs/08-github-sync.md b/docs/08-github-sync.md
index c1cfb266..d38ed467 100644
--- a/docs/08-github-sync.md
+++ b/docs/08-github-sync.md
@@ -12,21 +12,21 @@ We will not cover what GitHub is and how to use it in this chapter, but this [re
## Learning Objectives
-
+
To do so, you need to first click on the home button (looks like an icon of a house on the upper left) to go to the main menu (if you are not already there, this will be the case if you working on a project).
-
+
-Here you should see a list of any projects you have created or collabroated on.
+Here you should see a list of any projects you have created or collaborated on.
On the far upper right click on the "Account" button.
-
+
@@ -34,7 +34,7 @@ On the far upper right click on the "Account" button.
Then click on "Account Settings".
-
+
Next, scroll down to where you see the heading for "Project Synchronisation."
@@ -42,7 +42,7 @@ Next, scroll down to where you see the heading for "Project Synchronisation."
Click on the blue "Link" button next to the GitHub section.
-
+
If you already have a GitHub account, you will be asked to grant access.
@@ -54,15 +54,15 @@ To do so, first open the project that you would like to sync with GitHub from th
Next click the Overleaf menu button the far left upper corner.
-
+
Then scroll down to the "Sync" section.
-
+
The window that pops up about exporting the project to GitHub will then show up. This will create a new repository on GitHub with the files from your project.
-
+
## Syncing files
@@ -71,15 +71,15 @@ If you then make a change on GitHub and merge it with the main branch, you can p
To do so, navigate back to the Overleaf Menu in the project on the far left side.
-
+
Scroll back down to the sync section for GitHub.
-
+
You will see a window with buttons to sync changes back and forth from GitHub and Overleaf.
-
+
Now to get the change from GitHub you can press the "Pull GitHub changes into Overleaf" button.
diff --git a/docs/404.html b/docs/404.html
index 154daf33..7d060651 100644
--- a/docs/404.html
+++ b/docs/404.html
@@ -6,12 +6,11 @@