diff --git a/fabrication/suppliers/index.html b/fabrication/suppliers/index.html index ea58860..c42ca22 100644 --- a/fabrication/suppliers/index.html +++ b/fabrication/suppliers/index.html @@ -1078,6 +1078,270 @@

Suppliers

+
+

The following work-in-progress (WIP) table contains our top (online) materials suppliers. For a more in-depth list, including local providers, please refer to the “Legacy Suppliers” section below.

+
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
URLCategoryType of Materials/Products
https://3djake.es3D Printing3D printers, filaments, accessories
https://anycubic.es3D Printing3D printers, resins, filaments
https://bambulab.com3D Printing3D printers, software, filaments
https://createc3d.com3D Printing3D printers, filaments, spare parts
https://eu.store.bambulab.com3D Printing3D printers, filaments, parts
https://plotteralia.es3D Printing3D printers, filaments, tools
https://shop.revopoint3d.com3D Printing3D scanners, accessories
https://digikey.esElectronicsElectronic components, semiconductors
https://diotronic.comElectronicsElectronic components, development boards
https://es.farnell.comElectronicsElectronic components, industrial supplies
https://es.rs-online.comElectronicsElectronic components, tools, test equipment
https://mouser.esElectronicsElectronic components, semiconductors
https://tienda.bricogeek.comSpecialty StoresRobotics kits, electronics components
Ferretería Bonet S.L.DIY and ToolsLocal Hardware Store C/ de Pere IV, 102, Sant Martí, 08005 Barcelona
https://bauhaus.esDIY and ToolsTools, building materials, home improvement
https://carbidedepot.comDIY and ToolsCarbide tools, cutting tools
https://leroymerlin.esDIY and ToolsTools, building materials, garden supplies
https://manomano.esDIY and ToolsTools, home improvement, garden supplies
https://mausa.esDIY and ToolsTools, hardware, industrial supplies
https://milbby.comDIY and ToolsCraft supplies, art materials
https://abacus.coopGeneral RetailBooks, stationery, educational materials
https://compraonline.alcampo.esGeneral RetailGroceries, household items
https://ikea.comGeneral RetailFurniture, home goods, decor
https://pccomponentes.comGeneral RetailElectronics, computer hardware, peripherals
https://feroca.comMaterials and SuppliesResin, silicone, molds, casting materials
https://formx.esMaterials and SuppliesSpecial effects materials, resins, silicones
https://gabarro.comMaterials and SuppliesWood, timber, panels, veneer
https://quimicsdalmauonline.comMaterials and SuppliesChemicals, laboratory supplies
https://rajapack.esMaterials and SuppliesPackaging materials, boxes, tapes
https://supermagnete.esMaterials and SuppliesMagnets, magnetic systems
https://alfasoni.comSpecialty StoresAudio and music equipment
https://casadefieras.esSpecialty StoresHandcrafted goods, artisanal products
https://cremas-caseras.esSpecialty StoresHomemade cosmetic ingredients and kits
https://distrigraf.comSpecialty StoresPrinting and graphic arts supplies
https://eltallerdelmodelista.comSpecialty StoresModel kits, model making supplies
https://forniturasdelarosa.comSpecialty StoresJewelry making supplies, beads, tools
https://grown.bioSpecialty StoresSustainable materials, mycelium products
https://grupofb.esSpecialty StoresIndustrial supplies, hardware
https://naturitas.esSpecialty StoresNatural health products, supplements
https://pidiscat.catSpecialty StoresLaboratory and scientific equipment
https://pulpoensutinta.comSpecialty StoresPrinting services, custom prints
https://ractem.esSpecialty StoresOffice furniture, storage solutions
https://ratrig.comSpecialty StoresCNC machines, aluminum profiles
https://robotopia.esSpecialty StoresRobotics kits, educational robots
https://rubiomonocoat.esSpecialty StoresWood finishes, oils, coatings
https://serveiestacio.comSpecialty StoresStationery, art supplies
https://suministrosdublan.netSpecialty StoresIndustrial supplies, maintenance products
https://tiendacables.comSpecialty StoresCables, connectors, electronics components
https://ultra-lab.netSpecialty StoresDigital fabrication tools, maker supplies
+

This table organizes the URLs according to their respective categories.

+

Legacy Suppliers

+
+

The following table needs to be udpated and merge with the previous one.

+
diff --git a/search/search_index.json b/search/search_index.json index 2e97d9b..9c8da51 100644 --- a/search/search_index.json +++ b/search/search_index.json @@ -1 +1 @@ -{"config":{"indexing":"full","lang":["en"],"min_search_length":3,"prebuild_index":false,"separator":"[\\s\\-]+"},"docs":[{"location":"","text":"Welcome to the knowledge hub of Fab Lab Barcelona ! You might have visited this content in the past using our wiki , and have worked on the old wiki page and moved it here. This documentation, as well as everything we do is open source and free as in freedom . The source code of this documentation can be found in this github repository . If you find a problem, please, open an issue or make a pull request! If you are contributing a project, a machine, a process, or whatever please, use the templates on each section. Fabrication Fabrication description here... Guides Guides description here... Research Research description here... Programs Programs description here... .md-header-nav__title{ font-size: 18px; font-weight: 600; } h1{ display: none; } .md-content__button.md-icon, .md-sidebar, .md-tabs, .md-footer-nav { display: none; } .md-content{ max-width: none; }","title":"Home"},{"location":"fabrication/","tags":["fabrication"],"text":"fabrication Fabrication Resources \u00b6 PRECIOUS PLASTIC SHEETPRESS The Precious Plastic Sheetpress! 12/09/2022 contributors: Christy Cairns and D\u00eddac Torrent PRECIOUS PLASTIC SHREDDER The Precious Plastics Shredder! 13/09/2022 contributors: Christy Cairns and D\u00eddac Torrent PRUSA MK3 A nice machine! 03/01/2022 contributors: Pepito Grillo DIBOND Dibond is a composite material that can get machined to make quite nice designs 03/01/2022 contributors: Anto\u00f1ito MACHINE TEMPLATE MATERIAL TEMPLATE","title":"Fabrication resources"},{"location":"fabrication/#fabrication-resources","text":"","title":"Fabrication Resources"},{"location":"fabrication/machines/","tags":["machines","fabrication"],"text":"machines fabrication Machines \u00b6 PRECIOUS PLASTIC SHEETPRESS The Precious Plastic Sheetpress! 12/09/2022 contributors: Christy Cairns and D\u00eddac Torrent PRECIOUS PLASTIC SHREDDER The Precious Plastics Shredder! 13/09/2022 contributors: Christy Cairns and D\u00eddac Torrent PRUSA MK3 A nice machine! 03/01/2022 contributors: Pepito Grillo","title":"Machines"},{"location":"fabrication/machines/#machines","text":"","title":"Machines"},{"location":"fabrication/machines/precious_plastic_sheet_press/","tags":["machines","experimental","fabrication"],"text":"machines experimental fabrication Precious Plastic Sheetpress \u00b6 Technical specifications \u00b6 Brand: Fab Lab Barcelona (concept by Precious Plastic) Work area: Laser cutting room Materials: Thermoplastics (PLA, HDPE, LDPE, PET, PP, PS\u2026), biomaterials, other Technology: Heating, pressing, moulding Machine parts: ///MACHINE PARTS DIAGRAM/// Applications \u00b6 Creating sheets (from 3mm to 15mm thick) with thermoplastics. The size of the sheet depends on the frame used. Using the pressure to compress a material. Using the heated platforms to melt a material. Precious Plastic sheet examples | PLA cuttlery by D\u00eddac Torrent (@torrent.fab) | Birdhouse by Adai Suri\u00f1ach (unknown design) Health & Safety \u00b6 CAUTION: This machine is highly exposed to the user. The platforms can reach very hot temperatures (over 300\u00b0C), so it is important to be well protected and to follow the operating instructions. Safety information: - Be always aware of the temperature of both platforms. - Use welding gloves to manipulate anything between the two platforms of the press when the heat is ON. - Some thermoplastics expel toxic fumes when melted. Use safety goggles and mask if needed. - Be careful with long hair and other stuff that can get caught by the press. - Don\u2019t use more pressure than what is needed. This could damage the machine. - Don\u2019t use earphones. Being able to hear and smell is fundamental when using Precious Plastic machines. - Safety button just turns off the machine, but platforms take long to cool down. - IF YOU HAVE ANY DOUBT, ASK! :) Operation \u00b6 CONTROL BOX OPERATION PROCEDURE 1. Plug in the Sheetpress, check that the emergency stop (b) is released and switch on the main power switch (a) . 2. Check the required temperature to melt your type of plastic and set the plate temperature controllers (f+h) to this temperature. 3. Set a time of the timer (d) , this can be the specific time reuired for the process or an arbitrary amount. The press will not begin to heat if a time is not set. 4. Close the pressing plates using the bottle jack and wait for them to heat up. 5. When the Sheetpress is at the desired temperature, open the pressing plates of the Sheetpress by releasing pressure from the bottle jack. 6. Place the bottom aluminium sheet on the bottom platform and apply a layer of silicone oil or suitbale lubricant. Make sure to remove any remnants of the previous sheet. 7. Place the mould frame on the bottom aluminium sheet. 8. Load the plastic into the mould. 9. Spread the plastic evenly across the area inside the mould frame. It\u2019s recommended to put slightly less material around a 100mm border offset on the inside of the edges. 10. Oil the other part of the mould (that comes inside of the frame) and place the oiled side facing down on top of the spread plastic. 11. Close the pressing plates using the bottle jack until the pressure gauge reads the desired pressure. Do not exceed 5 tons. 12. Keep monitoring the pressure. Plastic reduces its size when it melts. 13. When the mould has been in the Sheetpress for the required melting time, switch off the Sheetpress and allow to cool in situ. 14. Alternatively you can take out the mould and allow the sheet to cool externally. 15. Once everything has cooled down, clean the aluminium sheet and mould and make sure the machine is ready to use. You can see an example of the procedure here: Making a PLA sheet at Fab Lab Barcelona by D\u00eddac Torrent TROUBLESHOOTING Plates are not heating: Timer (d) not set. | Power indicators (e+g) not illuminated. | Emergency power off mushroom button (c.) engaged. Press is creating fumes or smoke: Check that the temperatures are set correctly for the material being used. | Check no plastic material is in direct contact with heated plates. USEFUL INFORMATION AND TIPS Don\u2019t retract the plate further than you need as the jack moves in very small increments and it takes a long time to raise the plate. Materials settings \u00b6 These are some of the settings tested for the different thermoplastics to create sheets of different thicknesses. Maintenance \u00b6 Borrowed from Precious Plastic: Sheetpress Maintenance by Precious Plastic WEEKLY - Clean the heating plates: Scrape any remiant material from the heating plates. You may need to use a high volume alcohol if there is heavy corrosion. - Grease rails: Use a wooden spatula to apply a liberal amount of grease to all the rails. MONTHLY - Inspect and replace mould sheets: Inspect your mould sheets, if any of them are damaged beyond repair then they may need replacing. - Check website for hacks/updates: The community are continuously developing hacks, modifications and techniques which get shared on the internet, take a look to see what is there that can help or inspire you! YEARLY - Deep clean heating plates: Scrape any remiant material from the heating plates. You may need to use a high volume alcohol if there is heavy corrosion. You may also need to use a rotary sander to remove tough burnt on material but be gentle, use a high grit sandpaper (>220) to preserve the flatness of the sheet. - Check oil in jacks: Bleed and replace the oil in the jacks. - Check electronics: Check the resistance of your elements on each of the three phases is equal to the number of heating elements attached to each phase. If it does not one of your heating elements may be broken, use a thermal camera to check. Check all the components inside the enclosure for visual signs of melting/burning and replace anything that appears damaged. Re paint worn areas Check the body panels and frame for signs of ware, repaint any exposed metal to protect it from corrosion. External resources \u00b6 Suppliers User Manual Info page","title":"Precious Plastic Sheetpress"},{"location":"fabrication/machines/precious_plastic_sheet_press/#precious-plastic-sheetpress","text":"","title":"Precious Plastic Sheetpress"},{"location":"fabrication/machines/precious_plastic_sheet_press/#technical-specifications","text":"Brand: Fab Lab Barcelona (concept by Precious Plastic) Work area: Laser cutting room Materials: Thermoplastics (PLA, HDPE, LDPE, PET, PP, PS\u2026), biomaterials, other Technology: Heating, pressing, moulding Machine parts: ///MACHINE PARTS DIAGRAM///","title":"Technical specifications"},{"location":"fabrication/machines/precious_plastic_sheet_press/#applications","text":"Creating sheets (from 3mm to 15mm thick) with thermoplastics. The size of the sheet depends on the frame used. Using the pressure to compress a material. Using the heated platforms to melt a material. Precious Plastic sheet examples | PLA cuttlery by D\u00eddac Torrent (@torrent.fab) | Birdhouse by Adai Suri\u00f1ach (unknown design)","title":"Applications"},{"location":"fabrication/machines/precious_plastic_sheet_press/#health-safety","text":"CAUTION: This machine is highly exposed to the user. The platforms can reach very hot temperatures (over 300\u00b0C), so it is important to be well protected and to follow the operating instructions. Safety information: - Be always aware of the temperature of both platforms. - Use welding gloves to manipulate anything between the two platforms of the press when the heat is ON. - Some thermoplastics expel toxic fumes when melted. Use safety goggles and mask if needed. - Be careful with long hair and other stuff that can get caught by the press. - Don\u2019t use more pressure than what is needed. This could damage the machine. - Don\u2019t use earphones. Being able to hear and smell is fundamental when using Precious Plastic machines. - Safety button just turns off the machine, but platforms take long to cool down. - IF YOU HAVE ANY DOUBT, ASK! :)","title":"Health & Safety"},{"location":"fabrication/machines/precious_plastic_sheet_press/#operation","text":"CONTROL BOX OPERATION PROCEDURE 1. Plug in the Sheetpress, check that the emergency stop (b) is released and switch on the main power switch (a) . 2. Check the required temperature to melt your type of plastic and set the plate temperature controllers (f+h) to this temperature. 3. Set a time of the timer (d) , this can be the specific time reuired for the process or an arbitrary amount. The press will not begin to heat if a time is not set. 4. Close the pressing plates using the bottle jack and wait for them to heat up. 5. When the Sheetpress is at the desired temperature, open the pressing plates of the Sheetpress by releasing pressure from the bottle jack. 6. Place the bottom aluminium sheet on the bottom platform and apply a layer of silicone oil or suitbale lubricant. Make sure to remove any remnants of the previous sheet. 7. Place the mould frame on the bottom aluminium sheet. 8. Load the plastic into the mould. 9. Spread the plastic evenly across the area inside the mould frame. It\u2019s recommended to put slightly less material around a 100mm border offset on the inside of the edges. 10. Oil the other part of the mould (that comes inside of the frame) and place the oiled side facing down on top of the spread plastic. 11. Close the pressing plates using the bottle jack until the pressure gauge reads the desired pressure. Do not exceed 5 tons. 12. Keep monitoring the pressure. Plastic reduces its size when it melts. 13. When the mould has been in the Sheetpress for the required melting time, switch off the Sheetpress and allow to cool in situ. 14. Alternatively you can take out the mould and allow the sheet to cool externally. 15. Once everything has cooled down, clean the aluminium sheet and mould and make sure the machine is ready to use. You can see an example of the procedure here: Making a PLA sheet at Fab Lab Barcelona by D\u00eddac Torrent TROUBLESHOOTING Plates are not heating: Timer (d) not set. | Power indicators (e+g) not illuminated. | Emergency power off mushroom button (c.) engaged. Press is creating fumes or smoke: Check that the temperatures are set correctly for the material being used. | Check no plastic material is in direct contact with heated plates. USEFUL INFORMATION AND TIPS Don\u2019t retract the plate further than you need as the jack moves in very small increments and it takes a long time to raise the plate.","title":"Operation"},{"location":"fabrication/machines/precious_plastic_sheet_press/#materials-settings","text":"These are some of the settings tested for the different thermoplastics to create sheets of different thicknesses.","title":"Materials settings"},{"location":"fabrication/machines/precious_plastic_sheet_press/#maintenance","text":"Borrowed from Precious Plastic: Sheetpress Maintenance by Precious Plastic WEEKLY - Clean the heating plates: Scrape any remiant material from the heating plates. You may need to use a high volume alcohol if there is heavy corrosion. - Grease rails: Use a wooden spatula to apply a liberal amount of grease to all the rails. MONTHLY - Inspect and replace mould sheets: Inspect your mould sheets, if any of them are damaged beyond repair then they may need replacing. - Check website for hacks/updates: The community are continuously developing hacks, modifications and techniques which get shared on the internet, take a look to see what is there that can help or inspire you! YEARLY - Deep clean heating plates: Scrape any remiant material from the heating plates. You may need to use a high volume alcohol if there is heavy corrosion. You may also need to use a rotary sander to remove tough burnt on material but be gentle, use a high grit sandpaper (>220) to preserve the flatness of the sheet. - Check oil in jacks: Bleed and replace the oil in the jacks. - Check electronics: Check the resistance of your elements on each of the three phases is equal to the number of heating elements attached to each phase. If it does not one of your heating elements may be broken, use a thermal camera to check. Check all the components inside the enclosure for visual signs of melting/burning and replace anything that appears damaged. Re paint worn areas Check the body panels and frame for signs of ware, repaint any exposed metal to protect it from corrosion.","title":"Maintenance"},{"location":"fabrication/machines/precious_plastic_sheet_press/#external-resources","text":"Suppliers User Manual Info page","title":"External resources"},{"location":"fabrication/machines/precious_plastic_shredder/","tags":["machines","experimental","material processing","fabrication"],"text":"machines experimental material processing fabrication Precious Plastic Shredder \u00b6 Technical specifications \u00b6 Brand: Fab Lab Barcelona (concept by Precious Plastic) Work area: Laser cutting room Materials: Plastics, wood, fabrics, other Technology: Shredding, grinding Machine parts: ///MACHINE PARTS DIAGRAM/// Applications \u00b6 Primary application is the shredding of materials Application is determined by the thickeness of material vs the strength of the motor. This machine is experimental in its use and there are no hard or fast rules dictating the application. Simply put, start with small amounts of material and proceed with mechanical sympathy to avoid overloading the motor. Health & Safety \u00b6 Familiarise yourself with the location of the emergancy off button Danger from entanglement - The blades of the shredder can be exposed from above and below. Be sure to fit the mesh to the underside of the machine and make sure that these areas are clear of clothing, body parts and amything else that could get caught in them. Danger from material ejection - Depending on the material the shredding process can be quite violent with material be ejected above and below the shredder. Be sure to keep the lid closed on the shredder. Danger from sharp blades - Be careful of the blades when cleaning material from the blades. Where possible use a tool rather than your hands. Danger from circumventing safety protocols - There are protocols in place to help prevent the above dangers. Do not attempt to circumvent these in the operation of the machine. Operation \u00b6 a. main power key switch b. power and operation indicator light (yellow when powered, green when operating) c. direction switch d. warning/error indicator light e. reset button f. emergancy power off mushroom button Check condition of machine and that there is no left material from previous use Fit the mesh protector with the 4 bolts below the shredder Place the collector box under the shredder Gather the sorted material you want to shred Plug in and turn on the machine with the key switch (a.) Place small amounts of material in the hoper. Close the lid Turn the motor on in the forward direction by turning the direction switch (c.) clockwise Continue to shred until all material is processed Turn off the machine with the direction switch and key switch Store the shredded material Clean the machine Maintenance \u00b6 Under normal operation the main mainenace required is cleaning out any material after use. This should be done by the user as part of the use of the machine. Useful information \u00b6 Fit the mesh to the underside of the machine. This can be tricky but is a nessacery step. It is possible to run the machine backwards to clear material with the direction switch. This is a manual operation and works for the duration of the switch being held in the direction. The machine will automatically cut off when the motor is overloaded and the red light will illuminate to notify the operator of an issue. The lid of the shredder has an electronic cutoff that prevents that motor from working while the lid is open. External resources \u00b6 Suppliers User Manual Info page Troubleshooting \u00b6 Blades don\u2019t grab the plastic - Run the machine backward to jostle the material, anti-clockwise on the direction switch (c.) // Reposition the material in the shredder by hand when the machine is off. THe Blades stop turnning mid operation - Is the red light (d.) illuminated? This indicates the motor is overloaded. Switch off machine and remove material or run the machine backwards. Machine will not turn on // blades do not turn - Check that the emergancy stop mushroom button (f.) is not applied. // Check that the lid is correctly closed so that the magnetic safety cut-off is connected.","title":"Precious Plastic Shredder"},{"location":"fabrication/machines/precious_plastic_shredder/#precious-plastic-shredder","text":"","title":"Precious Plastic Shredder"},{"location":"fabrication/machines/precious_plastic_shredder/#technical-specifications","text":"Brand: Fab Lab Barcelona (concept by Precious Plastic) Work area: Laser cutting room Materials: Plastics, wood, fabrics, other Technology: Shredding, grinding Machine parts: ///MACHINE PARTS DIAGRAM///","title":"Technical specifications"},{"location":"fabrication/machines/precious_plastic_shredder/#applications","text":"Primary application is the shredding of materials Application is determined by the thickeness of material vs the strength of the motor. This machine is experimental in its use and there are no hard or fast rules dictating the application. Simply put, start with small amounts of material and proceed with mechanical sympathy to avoid overloading the motor.","title":"Applications"},{"location":"fabrication/machines/precious_plastic_shredder/#health-safety","text":"Familiarise yourself with the location of the emergancy off button Danger from entanglement - The blades of the shredder can be exposed from above and below. Be sure to fit the mesh to the underside of the machine and make sure that these areas are clear of clothing, body parts and amything else that could get caught in them. Danger from material ejection - Depending on the material the shredding process can be quite violent with material be ejected above and below the shredder. Be sure to keep the lid closed on the shredder. Danger from sharp blades - Be careful of the blades when cleaning material from the blades. Where possible use a tool rather than your hands. Danger from circumventing safety protocols - There are protocols in place to help prevent the above dangers. Do not attempt to circumvent these in the operation of the machine.","title":"Health & Safety"},{"location":"fabrication/machines/precious_plastic_shredder/#operation","text":"a. main power key switch b. power and operation indicator light (yellow when powered, green when operating) c. direction switch d. warning/error indicator light e. reset button f. emergancy power off mushroom button Check condition of machine and that there is no left material from previous use Fit the mesh protector with the 4 bolts below the shredder Place the collector box under the shredder Gather the sorted material you want to shred Plug in and turn on the machine with the key switch (a.) Place small amounts of material in the hoper. Close the lid Turn the motor on in the forward direction by turning the direction switch (c.) clockwise Continue to shred until all material is processed Turn off the machine with the direction switch and key switch Store the shredded material Clean the machine","title":"Operation"},{"location":"fabrication/machines/precious_plastic_shredder/#maintenance","text":"Under normal operation the main mainenace required is cleaning out any material after use. This should be done by the user as part of the use of the machine.","title":"Maintenance"},{"location":"fabrication/machines/precious_plastic_shredder/#useful-information","text":"Fit the mesh to the underside of the machine. This can be tricky but is a nessacery step. It is possible to run the machine backwards to clear material with the direction switch. This is a manual operation and works for the duration of the switch being held in the direction. The machine will automatically cut off when the motor is overloaded and the red light will illuminate to notify the operator of an issue. The lid of the shredder has an electronic cutoff that prevents that motor from working while the lid is open.","title":"Useful information"},{"location":"fabrication/machines/precious_plastic_shredder/#external-resources","text":"Suppliers User Manual Info page","title":"External resources"},{"location":"fabrication/machines/precious_plastic_shredder/#troubleshooting","text":"Blades don\u2019t grab the plastic - Run the machine backward to jostle the material, anti-clockwise on the direction switch (c.) // Reposition the material in the shredder by hand when the machine is off. THe Blades stop turnning mid operation - Is the red light (d.) illuminated? This indicates the motor is overloaded. Switch off machine and remove material or run the machine backwards. Machine will not turn on // blades do not turn - Check that the emergancy stop mushroom button (f.) is not applied. // Check that the lid is correctly closed so that the magnetic safety cut-off is connected.","title":"Troubleshooting"},{"location":"fabrication/machines/prusamk3/","tags":["machines","fabrication"],"text":"machines fabrication Prusa MK3 \u00b6 This is an awesome machine!","title":"Prusa MK3"},{"location":"fabrication/machines/prusamk3/#prusa-mk3","text":"This is an awesome machine!","title":"Prusa MK3"},{"location":"fabrication/materials/","tags":["materials"],"text":"materials Materials \u00b6 DIBOND Dibond is a composite material that can get machined to make quite nice designs 03/01/2022 contributors: Anto\u00f1ito","title":"Materials"},{"location":"fabrication/materials/#materials","text":"","title":"Materials"},{"location":"fabrication/materials/dibond/","tags":["materials","fabrication"],"text":"materials fabrication Dibond \u00b6 This is an awesome material!","title":"Dibond"},{"location":"fabrication/materials/dibond/#dibond","text":"This is an awesome material!","title":"Dibond"},{"location":"fabrication/suppliers/","text":"Suppliers \u00b6 Name Webpage Address Telephone Email Contact GENERIC PROVIDERS Servei Estacio http://www.serveiestacio.com/ Arag\u00f3 270-272, 08007 Barcelona 93 393 24 10 servei@serveiestacio.com Amazon Amazon.es WE do have a premium account at IAAC - - PAPER & CARDBOARD Raima http://www.raima.cat/ Raima Comtal 27 08002 Barcelona 93 317 49 66 Demco http://www.demco.es/ES/index.html Crta. Dosrius, 254 08440 Cardedeu 93 846 18 91 info@demco.es Vivasa http://www.vivasa.es/es/ Barrio Txako, s/n, Ctra. Nacional 625, 48480 Arrigorriaga 94 648 26 75 ventas@vivasa.es Vegio http://www.papelycarton.com/es/ Garnatxa 12, Parc Empresarial de Cervell\u00f3, 08758 Cervell\u00f3 93 673 05 25 vegio@vegio.es WOOD Maderas Estadella http://www.maderasestadella.com/ Bolivia 235, 08020 Barcelona 932 31 24 12 madesta@infonegocio.com Maderas Gabarro http://www.gabarro.com/es/ Carretera de Torre Romeu, s/n 08202 Sabadell 937 48 48 38 ventas@gabarro.com Manel Stock Maderas http://www.stockmaderas.com/Index.asp Mayor, 16, 44792 Josa 900 37 34 63 info@stockmaderas.com Mausa http://www.mausa.es/ Tirso de Molina 2, 08940 Cornell\u00e0 de Llobregat BCN 933 77 40 50 info@mausa.es Gilabert Fustes http://www.fustesgilabertsa.com/ Rambla de Guip\u00fascoa, 177, 08020 Barcelona 932 32 45 50 Placar www.placar.es Carrer del Cobalt, 73-77, 08907 L\u2019Hospitalet Baobab Fusters Passatge de la Vinyassa, 3 08005 Barcelona 933 09 93 90 Alberch http://www.alberch.com/ Carretera de Matar\u00f3 27, 08910 Badalona 933 89 42 00 fustes@alberch.com Esteba http://www.esteba.com/ macanamero@esteba.cat Send email to Miguel Angel PLASTIC Complas http://www.complasbcn.com/ Taqu\u00edgraf Garriga 170, 08029 Barcelona 902 400 094 bcn@complasbcn.com Sunclear http://www.sunclear.es/ Raiguer s/n, Poligono Industrial El Raiguer, 08160 Montmel\u00f3 Lork Industrias http://www.lorkindustrias.com/ Caracas 11, 08030 Barcelona 933 46 82 12 Linea Grafica Fluvi\u00e0 1-3, 08019 Barcelona 933 03 44 40 Rems Embalajes http://www.remssl.net/ Llull 57-61 1\u00ba 6\u00aa, 08005 Barcelona 934 86 46 46 rems@remssl.net METALS Castells ViIlaseca http://www.castellsvilaseca.com/ Gran Via de les Corts catalanes, 222 93 331 65 00 info@castellsvilaseca.cat Pera Perfiles Welser S.L. http://www.welser.com/es Via Augusta 298, 08017 Barcelona 93 252 30 30 es@welser.com Hierros Iserte, S.A. http://hierrosiserte.com/ Pol. Ind. Can Tapiola, 2 - Nave 10, 08110 Montcada i Reixac, Barcelona 93 572 50 94 info@hierrosiserte.com Miguel HARDWARE STORES Bonet http://www.ferreteriabonetsl.com/ Carrer de Pere IV 102, 08005 Barcelona 933 00 15 82 bonet@ferreteriabonetsl.com Coral SAS http://www.coralsas.eu/ Carrer de Pere IV, 200, 08005 Barcelona 933 09 65 00 Servei Estacio http://www.serveiestacio.com/ Arag\u00f3 270-272, 08007 barcelona 933 93 24 10 servei@serveiestacio.com Bricor http://www.bricor.es/ Plaza de Catalu\u00f1a 14 - 5\u00aa Planta, El Corte Ingl\u00e9s de Plaza de Catalu\u00f1a 08002 Barcelona 933 06 38 00 / 933 17 62 31 info@bricor.es Ferreteria Valls 1900 www.cofac.es Comte d\u2019Urgell 3-5 08011 Barcelona 93 424 33 47 info@valls1900.com Send an email addressed to Manuel Alaball Suministros Industriales Sl www.alaball.com Calle Sepulveda, 46 - BAJOS Barcelona 08015 933252396 ELECTRONICS Diotronics http://www.diotronic.com/ Carrer de Muntaner 49, 08011 Barcelona 933 23 40 23 diotronic@diotronic.com Onda Radio http://www.ondaradio.es/ Gran Via de les Corts Catalanes 581, 08011 Barcelona 934 52 51 00 orsa@ondaradio.es BCN Dynamics http://bcndynamics.com/es/ Sep\u00falveda 61, 08015 Barcelona 931 65 85 80 info@bcndynamics.com Cooking Hacks http://www.cooking-hacks.com/ Escatr\u00f3n 16, Edificio LIBELIUM, 50014 Zaragoza 976 54 74 92 info@cooking-hacks.com Brico Geek http://www.bricogeek.com/shop/ ONLINE Electan http://www.electan.com/arduino-c-337.html ONLINE DigiKey www.digikey.es ONLINE Farnell http://www.es.farnell.com ONLINE RS Amidata http://uk.rs-online.com ONLINE sesaelec http://www.sesaelec.com/ Carrer Ram\u00f3n Turr\u00f3, 106-110, 08005 Barcelona 933 097 bcn@sesaelec.com SENSING http://www.sensores-de-medida.es CALLE PELAYA 4, 1\u00aa PLANTA. 28110 ALGETE - MADRID 916 22 24 38 sensing@sensing.es Gert (German & Spanish) sensores https://sensores-de-presion.blogspot.com LIGHTING Luz Negra http://www.luznegra.net/ Monsoy y Benet http://www.monsoybenet.com/ BCN Servilux http://www.bcnservilux.com/ Barcelona LED http://www.barcelonaled.com/ Calle N\u00e1pols 129, 08025 Barcelona 932 418 081 fran@barcelonaled.com Fran MOLDS AND RESINS Form FX http://www.formfx.es Roc Boronat 39, Local 1, 08005 Barcelona 933 00 57 47 info@formx.es Tecnijoy http://www.tecnijoy.net/index.php C/ Diputaci\u00f3, 10 bajos - 08015 - Barcelona - Spain 93 4266805 tecnijoy@yahoo.es JSagrista (Poliuretano AltaD) http://www.sagristaproducts.com/es/ Lima 1, Nave A 3 08030 Barcelona 932 74 25 42 admon@sagristaproducts.com Alicia / Marco (Tecn.) INP 96 S.L. http://www.inp96.es/ C/ N\u00fa\u00f1ez de Balboa 118, 1\u00ba C, 28006 Madrid 915 63 88 60 administracion@inp96.es Rems (POREX) http://www.remssl.net/ C/ LLull 57-61 1\u00ba 6\u00aa 08005 - BARCELONA 93 486 46 46 rems@remssl.net PlastisolCassa (Porexpan) http://plastisolcassa.com C. Enric Coris, 57 \u00b7 972 46 15 00 plastisol@cassa.com 3D PRINTING FILAMENT AND RESINS Tresdenou http://tresdenou.com/es/ Extrudr http://extrudr.eu/ Ultra-Lab http://ultra-lab.net/ Spot-A Materials http://spotamaterials.com/ MILLING TOOLS - HERCO (CNC Tool Bit Maker) http://www.herco.net/webapp/ C/ Lima 2 local 2 08030 Barcelona Spain Inter Metal Sistemas http://intermetalsistema.com/ Carrer d\u2019 Angel Guimer\u00e0, 16, 08902 Hospitalet de Llobregat 933 32 12 39 info@intermetalsistema.com Zubiola http://www.zubiola.es/ Pol\u00edgono Basterretxe 44, 20720 Azkoitia 943 15 70 56 zubiola@zubiola.es CMT UTENSILI Espa\u00f1a http://www.cmtutensili.com/ Calle 25/31, Pol. Industrial, 46470 Catarroja 961 27 45 00 comercial@cmtutensili.com Esmolats Carucsa S.L. http://www.afiladoscarucsa.com/ Av. Diagonal 103, Sotano D1, 08005 Barcelona 933 08 60 07 afiladoscaruc@gmail.com JHP http://shop.jhp.es/ Avda. Diagonal 177 planta 5, 08018 Barcelona 902 90 09 86 / 932 74 10 54 soporte@jhp.es / info@jhp.net Jesus Boira Comercial T\u00e8cnica S.L. http://www.boiract.cat/ C/ Mas les Vinyes, 19 Pol\u00edgono industrial Mas les Vinyes, 08570 Torell\u00f3 931 80 01 10 boiract@boiract.cat LASER TOOLS Framun http://www.framuntechno.com/es/ Ctra. de Vic Km. 2,6, 08243 Manresa 0034 938 735 142 framun@framun.com II-VI UK LTD. http://www.ii-vi.es/ 21 Burley Road, Oakham, Rutland, LE15 6DH 0044 1 572 759 027 IR.Ventas.ES@II-VI.com Supraform, S.L. http://www.supraform.net/ Carrer de L\u2019Enginy Nave 14, 08850 Gava, Barcelona 0034 936 631 300 supraform@supraform.net CORK Surotecnia http://www.surotecnia.com/index.html Calle Muntaner, 56, 08011 Barcelona 934 534 711 jlleset@surotecnia.com Juan Barnacork (Aka Manufacturas Paulet) http://www.barnacork.com/index.php Carrer de Llull, 47-49, Planta 4 Local 5 933 097 783 info@barnacork.com Montse PAINT http://www.akzonobel.com/es/ TEXTILES // NETS http://www.redesycuerdas.com/ http://yutes.com/ http://www.iaso.es/ Stocks Textiles https://goo.gl/hVwpMY Carrer de T\u00e0nger, 48, 08018 BarcelonaPhone:617 57 01 79 http://www.ribescasals.com/ http://www.ventilador.com/ www.bove-ag.com C/ ctra de l\u2019arbo\u00e7 km 1,6, 08800 Vilanova i la Geltru, 41\u00ba 13\u2019 44.37 , 1\u00ba 41\u2019 59.83 , 41.228991, 1.6999 tel: 938 148 581 mov. 639 302 393 toni@bove-ag.com https://sensordeniveldecombustivel.blogspot.com/2019/08/herramientas-de-sensor-de-combustible.html LEATHER/ fabrics Curtidos Garc\u00eda http://www.curtidosgarcia.com/index.php Calle Hospital 49, 08001 Barcelona http://brambysupply.com/?lang=es Carrer de Sant Pere M\u00e9s Alt, 36, 08003 Barcelona, Spain Mercat dels Encants http://www.encantsbcn.com/es C. Dos de Maig, 186, 08013, Barcelona, El Clot CURTIS CAT www.curtitscat.com Carrer d\u2019Erasme de Janer, 1, 08001 Barcelona, Espa\u00f1a Tel\u00e9fono:+34 934 42 25 68 SMART MATERIALS http://www.inteligentes.org/ mov. 639 302 393 MAGNETS Supermagnete http://www.supermagnete.es/eng/ First 4 magnets http://www.first4magnets.com/ Aiman GZ http://m.aimangz.es/ La boutique del iman http://www.laboutiquedeliman.com/ FIne magnet wires http://www.elektrisola.com/us/home.html DRUGSTORES Parafarmacia Campoamor http://www.parafarmaciacampoamor.com/es/ Avenida de las Adelfas, 45, 03189 Dehesa de Campoamor, Orihuela Costa, Alicante 965 320 584 maria@parafarmaciacampoamor.com Maria Promofarma http://www.promocionesfarma.com/ Av. Diagonal 534, 6\u00ba 2\u00aa, 08006, Barcelona 902 930 918 clientes@promofarma.com RUBBER BELTS Suministros Blasi, S.L. http://blasisl.com/ C/ Arag\u00f3n 441-445, 08013 Barcelona 932 658 592 blasi@blasisl.com M\u00aa Angeles PCB board fabrication http://www.smallbatchassembly.com/ Pneumatics (+pipe and connectors) Asteva http://astevasl.com Carrer Almog\u00e0vers, 80, 08018 Barcelona 933 00 68 11 Barcelona de Fluidos S. Carrer de Llull, 70, 08005 Barcelona 933 00 38 12 Chemicals Manuel Riesgo http://manuelriesgo.com/ C/ Desenga\u00f1o, 22, 28004 Madrid 91 521 61 34 Quimics Dalmau http://quimicsdalmau.com/ Sigma-Aldrich http://www.sigmaaldrich.com web Mechanical components Misumi www.misumi-europe.com RS http://uk.rs-online.com SDP/SI www.sdp-si.com Cim Foundation C/ Llorens i Artigas 12 93 401 71 71 Taller Jordi Basas Vila Sant Gen\u00eds s/n 08719 Jorba Barcelona 938078044 taller@tallerjordibasas.com Precision/Grinding/Polishing Tools DelValle http://www.delvalle.cat/ c/ Bail\u00e8n 58, 08009 BARCELONA 93 265 83 18 delvalle@delvalle.cat Personal Protective Equipment A T Proteccion S.L. https://www.atproteccion.com/ Carrer d\u2019Ausi\u00e0s Marc, 155, 08013 Barcelona https://www.google.com/maps/d/u/0/viewer?hl=es&mid=1EE84VXpfY3PsD3eLO20NmPvtw8U&ll=41.71168544340683%2C6.279241949999914&z=6","title":"Suppliers"},{"location":"fabrication/suppliers/#suppliers","text":"Name Webpage Address Telephone Email Contact GENERIC PROVIDERS Servei Estacio http://www.serveiestacio.com/ Arag\u00f3 270-272, 08007 Barcelona 93 393 24 10 servei@serveiestacio.com Amazon Amazon.es WE do have a premium account at IAAC - - PAPER & CARDBOARD Raima http://www.raima.cat/ Raima Comtal 27 08002 Barcelona 93 317 49 66 Demco http://www.demco.es/ES/index.html Crta. Dosrius, 254 08440 Cardedeu 93 846 18 91 info@demco.es Vivasa http://www.vivasa.es/es/ Barrio Txako, s/n, Ctra. Nacional 625, 48480 Arrigorriaga 94 648 26 75 ventas@vivasa.es Vegio http://www.papelycarton.com/es/ Garnatxa 12, Parc Empresarial de Cervell\u00f3, 08758 Cervell\u00f3 93 673 05 25 vegio@vegio.es WOOD Maderas Estadella http://www.maderasestadella.com/ Bolivia 235, 08020 Barcelona 932 31 24 12 madesta@infonegocio.com Maderas Gabarro http://www.gabarro.com/es/ Carretera de Torre Romeu, s/n 08202 Sabadell 937 48 48 38 ventas@gabarro.com Manel Stock Maderas http://www.stockmaderas.com/Index.asp Mayor, 16, 44792 Josa 900 37 34 63 info@stockmaderas.com Mausa http://www.mausa.es/ Tirso de Molina 2, 08940 Cornell\u00e0 de Llobregat BCN 933 77 40 50 info@mausa.es Gilabert Fustes http://www.fustesgilabertsa.com/ Rambla de Guip\u00fascoa, 177, 08020 Barcelona 932 32 45 50 Placar www.placar.es Carrer del Cobalt, 73-77, 08907 L\u2019Hospitalet Baobab Fusters Passatge de la Vinyassa, 3 08005 Barcelona 933 09 93 90 Alberch http://www.alberch.com/ Carretera de Matar\u00f3 27, 08910 Badalona 933 89 42 00 fustes@alberch.com Esteba http://www.esteba.com/ macanamero@esteba.cat Send email to Miguel Angel PLASTIC Complas http://www.complasbcn.com/ Taqu\u00edgraf Garriga 170, 08029 Barcelona 902 400 094 bcn@complasbcn.com Sunclear http://www.sunclear.es/ Raiguer s/n, Poligono Industrial El Raiguer, 08160 Montmel\u00f3 Lork Industrias http://www.lorkindustrias.com/ Caracas 11, 08030 Barcelona 933 46 82 12 Linea Grafica Fluvi\u00e0 1-3, 08019 Barcelona 933 03 44 40 Rems Embalajes http://www.remssl.net/ Llull 57-61 1\u00ba 6\u00aa, 08005 Barcelona 934 86 46 46 rems@remssl.net METALS Castells ViIlaseca http://www.castellsvilaseca.com/ Gran Via de les Corts catalanes, 222 93 331 65 00 info@castellsvilaseca.cat Pera Perfiles Welser S.L. http://www.welser.com/es Via Augusta 298, 08017 Barcelona 93 252 30 30 es@welser.com Hierros Iserte, S.A. http://hierrosiserte.com/ Pol. Ind. Can Tapiola, 2 - Nave 10, 08110 Montcada i Reixac, Barcelona 93 572 50 94 info@hierrosiserte.com Miguel HARDWARE STORES Bonet http://www.ferreteriabonetsl.com/ Carrer de Pere IV 102, 08005 Barcelona 933 00 15 82 bonet@ferreteriabonetsl.com Coral SAS http://www.coralsas.eu/ Carrer de Pere IV, 200, 08005 Barcelona 933 09 65 00 Servei Estacio http://www.serveiestacio.com/ Arag\u00f3 270-272, 08007 barcelona 933 93 24 10 servei@serveiestacio.com Bricor http://www.bricor.es/ Plaza de Catalu\u00f1a 14 - 5\u00aa Planta, El Corte Ingl\u00e9s de Plaza de Catalu\u00f1a 08002 Barcelona 933 06 38 00 / 933 17 62 31 info@bricor.es Ferreteria Valls 1900 www.cofac.es Comte d\u2019Urgell 3-5 08011 Barcelona 93 424 33 47 info@valls1900.com Send an email addressed to Manuel Alaball Suministros Industriales Sl www.alaball.com Calle Sepulveda, 46 - BAJOS Barcelona 08015 933252396 ELECTRONICS Diotronics http://www.diotronic.com/ Carrer de Muntaner 49, 08011 Barcelona 933 23 40 23 diotronic@diotronic.com Onda Radio http://www.ondaradio.es/ Gran Via de les Corts Catalanes 581, 08011 Barcelona 934 52 51 00 orsa@ondaradio.es BCN Dynamics http://bcndynamics.com/es/ Sep\u00falveda 61, 08015 Barcelona 931 65 85 80 info@bcndynamics.com Cooking Hacks http://www.cooking-hacks.com/ Escatr\u00f3n 16, Edificio LIBELIUM, 50014 Zaragoza 976 54 74 92 info@cooking-hacks.com Brico Geek http://www.bricogeek.com/shop/ ONLINE Electan http://www.electan.com/arduino-c-337.html ONLINE DigiKey www.digikey.es ONLINE Farnell http://www.es.farnell.com ONLINE RS Amidata http://uk.rs-online.com ONLINE sesaelec http://www.sesaelec.com/ Carrer Ram\u00f3n Turr\u00f3, 106-110, 08005 Barcelona 933 097 bcn@sesaelec.com SENSING http://www.sensores-de-medida.es CALLE PELAYA 4, 1\u00aa PLANTA. 28110 ALGETE - MADRID 916 22 24 38 sensing@sensing.es Gert (German & Spanish) sensores https://sensores-de-presion.blogspot.com LIGHTING Luz Negra http://www.luznegra.net/ Monsoy y Benet http://www.monsoybenet.com/ BCN Servilux http://www.bcnservilux.com/ Barcelona LED http://www.barcelonaled.com/ Calle N\u00e1pols 129, 08025 Barcelona 932 418 081 fran@barcelonaled.com Fran MOLDS AND RESINS Form FX http://www.formfx.es Roc Boronat 39, Local 1, 08005 Barcelona 933 00 57 47 info@formx.es Tecnijoy http://www.tecnijoy.net/index.php C/ Diputaci\u00f3, 10 bajos - 08015 - Barcelona - Spain 93 4266805 tecnijoy@yahoo.es JSagrista (Poliuretano AltaD) http://www.sagristaproducts.com/es/ Lima 1, Nave A 3 08030 Barcelona 932 74 25 42 admon@sagristaproducts.com Alicia / Marco (Tecn.) INP 96 S.L. http://www.inp96.es/ C/ N\u00fa\u00f1ez de Balboa 118, 1\u00ba C, 28006 Madrid 915 63 88 60 administracion@inp96.es Rems (POREX) http://www.remssl.net/ C/ LLull 57-61 1\u00ba 6\u00aa 08005 - BARCELONA 93 486 46 46 rems@remssl.net PlastisolCassa (Porexpan) http://plastisolcassa.com C. Enric Coris, 57 \u00b7 972 46 15 00 plastisol@cassa.com 3D PRINTING FILAMENT AND RESINS Tresdenou http://tresdenou.com/es/ Extrudr http://extrudr.eu/ Ultra-Lab http://ultra-lab.net/ Spot-A Materials http://spotamaterials.com/ MILLING TOOLS - HERCO (CNC Tool Bit Maker) http://www.herco.net/webapp/ C/ Lima 2 local 2 08030 Barcelona Spain Inter Metal Sistemas http://intermetalsistema.com/ Carrer d\u2019 Angel Guimer\u00e0, 16, 08902 Hospitalet de Llobregat 933 32 12 39 info@intermetalsistema.com Zubiola http://www.zubiola.es/ Pol\u00edgono Basterretxe 44, 20720 Azkoitia 943 15 70 56 zubiola@zubiola.es CMT UTENSILI Espa\u00f1a http://www.cmtutensili.com/ Calle 25/31, Pol. Industrial, 46470 Catarroja 961 27 45 00 comercial@cmtutensili.com Esmolats Carucsa S.L. http://www.afiladoscarucsa.com/ Av. Diagonal 103, Sotano D1, 08005 Barcelona 933 08 60 07 afiladoscaruc@gmail.com JHP http://shop.jhp.es/ Avda. Diagonal 177 planta 5, 08018 Barcelona 902 90 09 86 / 932 74 10 54 soporte@jhp.es / info@jhp.net Jesus Boira Comercial T\u00e8cnica S.L. http://www.boiract.cat/ C/ Mas les Vinyes, 19 Pol\u00edgono industrial Mas les Vinyes, 08570 Torell\u00f3 931 80 01 10 boiract@boiract.cat LASER TOOLS Framun http://www.framuntechno.com/es/ Ctra. de Vic Km. 2,6, 08243 Manresa 0034 938 735 142 framun@framun.com II-VI UK LTD. http://www.ii-vi.es/ 21 Burley Road, Oakham, Rutland, LE15 6DH 0044 1 572 759 027 IR.Ventas.ES@II-VI.com Supraform, S.L. http://www.supraform.net/ Carrer de L\u2019Enginy Nave 14, 08850 Gava, Barcelona 0034 936 631 300 supraform@supraform.net CORK Surotecnia http://www.surotecnia.com/index.html Calle Muntaner, 56, 08011 Barcelona 934 534 711 jlleset@surotecnia.com Juan Barnacork (Aka Manufacturas Paulet) http://www.barnacork.com/index.php Carrer de Llull, 47-49, Planta 4 Local 5 933 097 783 info@barnacork.com Montse PAINT http://www.akzonobel.com/es/ TEXTILES // NETS http://www.redesycuerdas.com/ http://yutes.com/ http://www.iaso.es/ Stocks Textiles https://goo.gl/hVwpMY Carrer de T\u00e0nger, 48, 08018 BarcelonaPhone:617 57 01 79 http://www.ribescasals.com/ http://www.ventilador.com/ www.bove-ag.com C/ ctra de l\u2019arbo\u00e7 km 1,6, 08800 Vilanova i la Geltru, 41\u00ba 13\u2019 44.37 , 1\u00ba 41\u2019 59.83 , 41.228991, 1.6999 tel: 938 148 581 mov. 639 302 393 toni@bove-ag.com https://sensordeniveldecombustivel.blogspot.com/2019/08/herramientas-de-sensor-de-combustible.html LEATHER/ fabrics Curtidos Garc\u00eda http://www.curtidosgarcia.com/index.php Calle Hospital 49, 08001 Barcelona http://brambysupply.com/?lang=es Carrer de Sant Pere M\u00e9s Alt, 36, 08003 Barcelona, Spain Mercat dels Encants http://www.encantsbcn.com/es C. Dos de Maig, 186, 08013, Barcelona, El Clot CURTIS CAT www.curtitscat.com Carrer d\u2019Erasme de Janer, 1, 08001 Barcelona, Espa\u00f1a Tel\u00e9fono:+34 934 42 25 68 SMART MATERIALS http://www.inteligentes.org/ mov. 639 302 393 MAGNETS Supermagnete http://www.supermagnete.es/eng/ First 4 magnets http://www.first4magnets.com/ Aiman GZ http://m.aimangz.es/ La boutique del iman http://www.laboutiquedeliman.com/ FIne magnet wires http://www.elektrisola.com/us/home.html DRUGSTORES Parafarmacia Campoamor http://www.parafarmaciacampoamor.com/es/ Avenida de las Adelfas, 45, 03189 Dehesa de Campoamor, Orihuela Costa, Alicante 965 320 584 maria@parafarmaciacampoamor.com Maria Promofarma http://www.promocionesfarma.com/ Av. Diagonal 534, 6\u00ba 2\u00aa, 08006, Barcelona 902 930 918 clientes@promofarma.com RUBBER BELTS Suministros Blasi, S.L. http://blasisl.com/ C/ Arag\u00f3n 441-445, 08013 Barcelona 932 658 592 blasi@blasisl.com M\u00aa Angeles PCB board fabrication http://www.smallbatchassembly.com/ Pneumatics (+pipe and connectors) Asteva http://astevasl.com Carrer Almog\u00e0vers, 80, 08018 Barcelona 933 00 68 11 Barcelona de Fluidos S. Carrer de Llull, 70, 08005 Barcelona 933 00 38 12 Chemicals Manuel Riesgo http://manuelriesgo.com/ C/ Desenga\u00f1o, 22, 28004 Madrid 91 521 61 34 Quimics Dalmau http://quimicsdalmau.com/ Sigma-Aldrich http://www.sigmaaldrich.com web Mechanical components Misumi www.misumi-europe.com RS http://uk.rs-online.com SDP/SI www.sdp-si.com Cim Foundation C/ Llorens i Artigas 12 93 401 71 71 Taller Jordi Basas Vila Sant Gen\u00eds s/n 08719 Jorba Barcelona 938078044 taller@tallerjordibasas.com Precision/Grinding/Polishing Tools DelValle http://www.delvalle.cat/ c/ Bail\u00e8n 58, 08009 BARCELONA 93 265 83 18 delvalle@delvalle.cat Personal Protective Equipment A T Proteccion S.L. https://www.atproteccion.com/ Carrer d\u2019Ausi\u00e0s Marc, 155, 08013 Barcelona https://www.google.com/maps/d/u/0/viewer?hl=es&mid=1EE84VXpfY3PsD3eLO20NmPvtw8U&ll=41.71168544340683%2C6.279241949999914&z=6","title":"Suppliers"},{"location":"fabrication/templates/","tags":["templates"],"text":"templates Templates \u00b6 MACHINE TEMPLATE MATERIAL TEMPLATE PROGRAM TEMPLATE","title":"Templates"},{"location":"fabrication/templates/#templates","text":"","title":"Templates"},{"location":"fabrication/templates/machine-template/","tags":["template","fabrication"],"text":"template fabrication Technical specifications \u00b6 Brand: Work area: Materials: Technology: Applications \u00b6 List of applications Health & Safety \u00b6 Maintenance \u00b6 Useful information \u00b6 External resources \u00b6 Suppliers User Manual Info page Guides \u00b6 Troubleshooting \u00b6","title":"Machine template"},{"location":"fabrication/templates/machine-template/#technical-specifications","text":"Brand: Work area: Materials: Technology:","title":"Technical specifications"},{"location":"fabrication/templates/machine-template/#applications","text":"List of applications","title":"Applications"},{"location":"fabrication/templates/machine-template/#health-safety","text":"","title":"Health & Safety"},{"location":"fabrication/templates/machine-template/#maintenance","text":"","title":"Maintenance"},{"location":"fabrication/templates/machine-template/#useful-information","text":"","title":"Useful information"},{"location":"fabrication/templates/machine-template/#external-resources","text":"Suppliers User Manual Info page","title":"External resources"},{"location":"fabrication/templates/machine-template/#guides","text":"","title":"Guides"},{"location":"fabrication/templates/machine-template/#troubleshooting","text":"","title":"Troubleshooting"},{"location":"fabrication/templates/material_template/","tags":["template","fabrication"],"text":"template fabrication Title \u00b6 Content Process \u00b6 Process","title":"Material template"},{"location":"fabrication/templates/material_template/#title","text":"Content","title":"Title"},{"location":"fabrication/templates/material_template/#process","text":"Process","title":"Process"},{"location":"guides/","tags":["guides"],"text":"guides Guides \u00b6 MKDOCS DOCUMENTATION","title":"Guides"},{"location":"guides/#guides","text":"","title":"Guides"},{"location":"guides/documentation/","tags":["guides"],"text":"guides Theme \u00b6 We use the Material theme for MK Docs. You can find the updated features in the theme specimen . We also run most of the available extensions . Example configurations \u00b6 Learn from running projects Here there is a list of projects using mkdocs in different ways for documenting various things: SmartCitizen Docs: https://docs.smartcitizen.me Fabacademy Barcelona Local Docs: https://fablabbcn-projects.gitlab.io/learning/fabacademy-local-docs/ This documentation: https://knowledge.fablabbcn.org Customization \u00b6 You can deeply customize it by simply editing the the mkdocs.yml file the root folder mkdocs.yml . An interesting feature is the possibility to manually customize navigation. See Smart Citizen Docs as an example. Automation \u00b6 We use Github Action to automatically update knowledge.fablabbcn.org every time you commit a change. Currently we run a single workflow to simply build the site like mkdocs build but more complex features are possible. Find an example here .","title":"mkdocs documentation"},{"location":"guides/documentation/#theme","text":"We use the Material theme for MK Docs. You can find the updated features in the theme specimen . We also run most of the available extensions .","title":"Theme"},{"location":"guides/documentation/#example-configurations","text":"Learn from running projects Here there is a list of projects using mkdocs in different ways for documenting various things: SmartCitizen Docs: https://docs.smartcitizen.me Fabacademy Barcelona Local Docs: https://fablabbcn-projects.gitlab.io/learning/fabacademy-local-docs/ This documentation: https://knowledge.fablabbcn.org","title":"Example configurations"},{"location":"guides/documentation/#customization","text":"You can deeply customize it by simply editing the the mkdocs.yml file the root folder mkdocs.yml . An interesting feature is the possibility to manually customize navigation. See Smart Citizen Docs as an example.","title":"Customization"},{"location":"guides/documentation/#automation","text":"We use Github Action to automatically update knowledge.fablabbcn.org every time you commit a change. Currently we run a single workflow to simply build the site like mkdocs build but more complex features are possible. Find an example here .","title":"Automation"},{"location":"programs/","tags":["programs"],"text":"programs Programs \u00b6 This section summarises educational programs and related material in different categories. All content can be reused for other classes. Make sure to follow the templates here and here . MDEF FABACADEMY Fabacademy is... FABRICADEMY","title":"Programs"},{"location":"programs/#programs","text":"This section summarises educational programs and related material in different categories. All content can be reused for other classes. Make sure to follow the templates here and here .","title":"Programs"},{"location":"programs/MDEF/","tags":["programs"],"text":"programs Projects \u00b6 Resources \u00b6 Publications \u00b6 Toolkits \u00b6 Links \u00b6 Useful links Local documentation link . The global site link :laptop: Local projects here","title":"MDEF"},{"location":"programs/MDEF/#projects","text":"","title":"Projects"},{"location":"programs/MDEF/#resources","text":"","title":"Resources"},{"location":"programs/MDEF/#publications","text":"","title":"Publications"},{"location":"programs/MDEF/#toolkits","text":"","title":"Toolkits"},{"location":"programs/MDEF/#links","text":"Useful links Local documentation link . The global site link :laptop: Local projects here","title":"Links"},{"location":"programs/fabacademy/","tags":["programs"],"text":"programs Projects \u00b6 Resources \u00b6 Publications \u00b6 Toolkits \u00b6 Links \u00b6 Useful links Fabacademy local documentation link . The global fabacademy site link :laptop: Local projects here","title":"Fabacademy"},{"location":"programs/fabacademy/#projects","text":"","title":"Projects"},{"location":"programs/fabacademy/#resources","text":"","title":"Resources"},{"location":"programs/fabacademy/#publications","text":"","title":"Publications"},{"location":"programs/fabacademy/#toolkits","text":"","title":"Toolkits"},{"location":"programs/fabacademy/#links","text":"Useful links Fabacademy local documentation link . The global fabacademy site link :laptop: Local projects here","title":"Links"},{"location":"programs/fabricademy/","tags":["programs"],"text":"programs Projects \u00b6 Resources \u00b6 Publications \u00b6 Toolkits \u00b6 Links \u00b6 Useful links Fabricademy local documentation link . The global fabricademy site link :laptop: Local projects here","title":"Fabricademy"},{"location":"programs/fabricademy/#projects","text":"","title":"Projects"},{"location":"programs/fabricademy/#resources","text":"","title":"Resources"},{"location":"programs/fabricademy/#publications","text":"","title":"Publications"},{"location":"programs/fabricademy/#toolkits","text":"","title":"Toolkits"},{"location":"programs/fabricademy/#links","text":"Useful links Fabricademy local documentation link . The global fabricademy site link :laptop: Local projects here","title":"Links"},{"location":"programs/templates/program_template/","tags":["education","template"],"text":"education template Projects \u00b6 Resources \u00b6 Publications \u00b6 Toolkits \u00b6 Links \u00b6 Useful links Local documentation link . The global site link :laptop: Local projects here","title":"Program template"},{"location":"programs/templates/program_template/#projects","text":"","title":"Projects"},{"location":"programs/templates/program_template/#resources","text":"","title":"Resources"},{"location":"programs/templates/program_template/#publications","text":"","title":"Publications"},{"location":"programs/templates/program_template/#toolkits","text":"","title":"Toolkits"},{"location":"programs/templates/program_template/#links","text":"Useful links Local documentation link . The global site link :laptop: Local projects here","title":"Links"},{"location":"research/","text":"Project Index \u00b6 Available resources","title":"Project Index"},{"location":"research/#project-index","text":"Available resources","title":"Project Index"},{"location":"research/project%20contributions/popmachina/","tags":["eu project"],"text":"eu project Project description \u00b6 The EU-funded POP-MACHINA aims to promote a more circular production paradigm, engaging communities, and promoting urban and community development achieved through collaborative production in cities. The project will create a network of existing and new communities in urban areas and use cutting-edge technologies (factory-of-the-future, blockchain) to engage urban planning, boost social dialogue, recognise local needs in training and skills development. The partners will share open source practices and develop a framework for implementing circular collaborative production in urban areas. Info Link to project website link . Info Link to Fab Lab Barcelona website link . Contributions generated by/with Fab Lab Barcelona \u00b6 Publications \u00b6 Programmes \u00b6 Toolkits \u00b6 Links \u00b6 Interesting contributions from project partners \u00b6","title":"Pop-Machina"},{"location":"research/project%20contributions/popmachina/#project-description","text":"The EU-funded POP-MACHINA aims to promote a more circular production paradigm, engaging communities, and promoting urban and community development achieved through collaborative production in cities. The project will create a network of existing and new communities in urban areas and use cutting-edge technologies (factory-of-the-future, blockchain) to engage urban planning, boost social dialogue, recognise local needs in training and skills development. The partners will share open source practices and develop a framework for implementing circular collaborative production in urban areas. Info Link to project website link . Info Link to Fab Lab Barcelona website link .","title":"Project description"},{"location":"research/project%20contributions/popmachina/#contributions-generated-bywith-fab-lab-barcelona","text":"","title":"Contributions generated by/with Fab Lab Barcelona"},{"location":"research/project%20contributions/popmachina/#publications","text":"","title":"Publications"},{"location":"research/project%20contributions/popmachina/#programmes","text":"","title":"Programmes"},{"location":"research/project%20contributions/popmachina/#toolkits","text":"","title":"Toolkits"},{"location":"research/project%20contributions/popmachina/#links","text":"","title":"Links"},{"location":"research/project%20contributions/popmachina/#interesting-contributions-from-project-partners","text":"","title":"Interesting contributions from project partners"},{"location":"research/publications/","text":"Publications \u00b6","title":"Publications"},{"location":"research/publications/#publications","text":"","title":"Publications"},{"location":"research/publications/Books/","text":"Books \u00b6 S. Bourdon, J. Guy, S. Bosch, G. Camprodon, M. Reyes (ed.) (2023). Driving Design: Collective approaches Driving enriching design principles. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-120886-2-5) Download PDF A. Deserti, M. Real, F. Schmittinger.(ed.) (2022). Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools. Springer Nature. (ISBN: 978-3-030-78732-5) Download PDF K. Armstrong, T. Diez, P. Sanchez Toribio, M. Rodriguez, M. Reyes (ed.) (2021). This is Distributed Design: Making a new local & global design paradigm. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-617-2454-3) Download PDF K. Armstrong, P. Sanchez Toribio, E. Whyman, T. Diez. (ed.) (2020). Viral Design: The COVID-19 Crisis as a Global Test Bed for Distributed Design. Barcelona, Spain: Fab Lab Barcelona,Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-120886-0-1) Download PDF Armstrong, K. & Diez, T. (ed.) (2019). Design remix share repeat: how distributed design is changing the way makers and designers approach collaboration, tools and the market. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-948142-3-5) Download PDF Diez Ladera, T., Gershenfeld, N., Steels, L., Filippi, P., Balestrini, M., Seiz, G., Corbin, E., Tooze, J., Lassiter, S., Ermacora, T., Li, D., & Hilgefort, J. (2018). Fab City: The Mass Distribution of (Almost) Everything. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-948142-1-1) Download PDF Menichinelli, M & Molina, M. (2018). Understanding Collective Awareness Platforms with the Maker Movement. Results, reflections and future strategies from the Horizon 2020 MAKE-IT project. (ISBN: 978-84-948142-0-4) Download PDF Woods, M., Balestrini, M., Bejtullahu, S., Bocconi, S., Boerwinkel, G., Boonstra, M., Boschman, D-S., Camprodon, G., Coulson, S., Diez, T., Fazey, I., Hemment, D., van den Horn, C., Ilazi, T., Jansen-Dings, I., Kresin, F., McQuillan, D., Nascimento, S., Pareschi, E., \u2026 Seiz, G. (2018). Citizen Sensing: A Toolkit. Making Sense. (ISBN: 978-90-828215-0-5) Download PDF","title":"Books"},{"location":"research/publications/Books/#books","text":"S. Bourdon, J. Guy, S. Bosch, G. Camprodon, M. Reyes (ed.) (2023). Driving Design: Collective approaches Driving enriching design principles. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-120886-2-5) Download PDF A. Deserti, M. Real, F. Schmittinger.(ed.) (2022). Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools. Springer Nature. (ISBN: 978-3-030-78732-5) Download PDF K. Armstrong, T. Diez, P. Sanchez Toribio, M. Rodriguez, M. Reyes (ed.) (2021). This is Distributed Design: Making a new local & global design paradigm. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-617-2454-3) Download PDF K. Armstrong, P. Sanchez Toribio, E. Whyman, T. Diez. (ed.) (2020). Viral Design: The COVID-19 Crisis as a Global Test Bed for Distributed Design. Barcelona, Spain: Fab Lab Barcelona,Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-120886-0-1) Download PDF Armstrong, K. & Diez, T. (ed.) (2019). Design remix share repeat: how distributed design is changing the way makers and designers approach collaboration, tools and the market. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-948142-3-5) Download PDF Diez Ladera, T., Gershenfeld, N., Steels, L., Filippi, P., Balestrini, M., Seiz, G., Corbin, E., Tooze, J., Lassiter, S., Ermacora, T., Li, D., & Hilgefort, J. (2018). Fab City: The Mass Distribution of (Almost) Everything. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-948142-1-1) Download PDF Menichinelli, M & Molina, M. (2018). Understanding Collective Awareness Platforms with the Maker Movement. Results, reflections and future strategies from the Horizon 2020 MAKE-IT project. (ISBN: 978-84-948142-0-4) Download PDF Woods, M., Balestrini, M., Bejtullahu, S., Bocconi, S., Boerwinkel, G., Boonstra, M., Boschman, D-S., Camprodon, G., Coulson, S., Diez, T., Fazey, I., Hemment, D., van den Horn, C., Ilazi, T., Jansen-Dings, I., Kresin, F., McQuillan, D., Nascimento, S., Pareschi, E., \u2026 Seiz, G. (2018). Citizen Sensing: A Toolkit. Making Sense. (ISBN: 978-90-828215-0-5) Download PDF","title":"Books"},{"location":"research/publications/Journals%20and%20Papers/","text":"Papers and Posters \u00b6 2024 \u00b6 Panneels, I., Lechelt, S., Schmidt, A., & Co\u015fkun, A. (2024). Data-driven innovation for sustainable practice in the creative economy. https://doi.org/10.4324/9781003365891-11 2023 \ud83d\udea7 \u00b6 Nadal, O. and Dom\u00ednguez,X. (2023). Integration of the maker movement in the classroom: a practical experience in the first year of an educational project. UTE Teaching & Technology (Universitas Tarraconensis), (1), e3566. https://doi.org/10.17345/ute.2023.3566 Mashhoodi, B., & Mu\u00f1oz-Unceta, P. (2023). Regional allocation of EV chargers\u2019 grid load. Annals of GIS, 0(0), 1\u201315. https://doi.org/10.1080/19475683.2023.2166111 2022 \ud83d\udea7 \u00b6 Solanas, O., Usart, M., Valls, C., Dom\u00ednguez, X. (2022). Metodolog\u00eda STEAM-Maker en primaria: un estudio mixto. Publicado en el libro de actas \u201cEducaci\u00f3n transformadora en un mundo digital: Conectando paisajes de aprendizaje\u201d (pg 272-274) del XXV Congreso Internacional Edutec 2022. https://edutec2022.uib.es/libro-de-actas/ Gerodimou, M.D., Chamorro-Martin, E., & Fuentemilla, S. (2022). Developing maker-centred learning programs to promote critical thinking about technology and design for emergent futures. Proceedings of the Fab 17 Research Papers Stream, 145\u2013159. https://doi.org/10.5281/zenodo.7432107 Ferro, C., Mu\u00f1oz Unceta, P., Fontana Valenti, C., Jusic, I., Cingolani, F., Diez Ladera, T., & Parikh, M. (2022). Fab City Hubs: Interfaces for community building and playgrounds for new innovative urban actions. Proceedings of the Fab 17 Research Papers Stream, 19\u201334. https://doi.org/10.5281/zenodo.7432052 Gerodimou, M.D., Chamorro, E., & Fuentemilla, S. (2022). Developing maker-centred learning programs to promote critical thinking about technology and design for emergent futures. Proceedings of the Fab 17 Research Papers Stream, 145\u2013159. https://doi.org/10.5281/zenodo.7432107 Burdiles Araneda, I. M., Dominguez, X., Real, M., Fuentemilla, S., & Pistofidou, A. (2022, May). Remix The School Project: Socio-Emotional Learning through Biomaterial making: A Methodology for Self-Awareness through Bio-material fabrication for teachers and children. In 6 th FabLearn Europe/MakeEd Conference 2022 (pp. 1-5). https://doi.org/10.1145/3535227.3535242 Bilgin, A. S., Molina Ascanio, M., Milanovic, I., Kirsch, M., Beernaert, Y., Sotiriou, S., Gregori Montaner, A., Cornakov, S., Velner, G., Axisa, J. , Wellens, T., Muscat, M., Vaidelis, G., Messaritou, M., Go\u017adzik, A., Castilla Mora, L., Ivanova, I., Dariou, E., Yuste, A., Preda, E., Quarta, B., B. Dom\u00ednguez, X., Kesting, F., Katikas, L., Mitic-Radulovic, A., Gras-Velazquez, A. (2022), STEM in the future: Transforming education for sustainability, Scientix Observatory, October 2022. http://files.eun.org/scientix/Bilgin_et_al_2022_STEM_in_the_Future_Final-to-publish-2.pdf Munoz-Unceta, P., Mashhoodi, B. (2022). Mobility, electricity, and parking data for EV infrastructure in the Amsterdam Metropolitan Area, Data in Brief, Volume 42, 2022, 108270, ISSN 2352-3409, https://doi.org/10.1016/j.dib.2022.108270 Furlan, C., Wandl, A., Cavalieri, C., Munoz-Unceta, P. (2022). Territorialising Circularity. In: Amenta, L., Russo, M., van Timmeren, A. (eds) Regenerative Territories. GeoJournal Library, vol 128. Springer, Cham. https://doi.org/10.1007/978-3-030-78536-9_2 Cabrera Galinzed, A., Pistofidou, A. (2022) From Textiles to Soft Robotics and the Emergent Approaches in STEAM and Textile Labs. In: Conference Proceedings. The Future of Education 2022. https://conference.pixel-online.net/FOE/files/foe/ed0012/FP/7865-ADU5593-FP-FOE12.pdf Munoz-Unceta, P., Lambert S., Pazaitis A. (2022) A citizen-oriented and circular-fabrication approach to productive cities and local resilience. The Fab City framework applied in the industrial historic centres of Barcelona, Milan and Tallinn, Urban Transitions Conference, 2022, Barcelona. https://www.researchgate.net/publication/365409209_How_can_citizen-oriented_local_actio [\u2026]native_more_resilient_sustainable_and_inclusive_city_model Earley, R., Hornbuckle R., Real, M, Hall, K. (2022) Designing the Circular Design Team, DRS Workshop 2022. https://ualresearchonline.arts.ac.uk/id/eprint/18614/ https://ualresearchonline.arts.ac.uk/id/eprint/18614/2/DRS2022-Workshop-CCD_Proposal%20V2.pdf Real, M., Pierite, JL., Quintero, M. (2022) Designing Reservist Cells in time of crisis, DRS Workshop 2022. Real, M., Pistofidou, A., Juarez-Calvos, M. (2022) FabLab Barcelona\u2014Co-design With Food Surplus: Better Redistributing, Upcycling and Composting. Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools, 2022, 37-46. https://link.springer.com/chapter/10.1007/978-3-030-78733-2_4 Real, M, Schmittinger, F. (2022) A Framework for Experimenting Co-creation in Real-Life Contexts. Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools, 2022, 11-24. https://link.springer.com/chapter/10.1007/978-3-030-78733-2_2 Wei, Y., Markopoulou, A., Zhu, Y., Chamorro-Martin, E., Kirova, N. (2022). Additive Manufacture of Cellulose Based Bio-Material on Architectural Scale. In: Yuan, P.F., Chai, H., Yan, C., Leach, N. (eds) Proceedings of the 2021 DigitalFUTURES. CDRF 2021. Springer, Singapore. https://doi.org/10.1007/978-981-16-5983-6_27 2021 \u00b6 Cabrera, A., Pistofidou, A., Real, M., Sykes, S., Czeschik, A., & Marsh, J. (2021). Innovation Ecosystem for women makers through textiles labs and the shemakes. eu approach. In Proceedings of the Fab 16 Research Papers Stream (pp. 221-239). https://doi.org/10.5281/zenodo.5169851 Maccani, G., Errandonea, L., Righi, V., Camprodon, G., & Galli, J. (2021). VenicAIRE. Quaderns d\u2019arquitectura i urbanisme, (Biennale), 74-81. https://raco.cat/index.php/QuadernsArquitecturaUrbanisme/article/view/392968 Sedini, C., Rasmussen, A. N., Marion, R., & Cipriani, L. (2021). Co-creating social and sustainable innovation in Makerspaces and Fab Labs. Lessons learnt from the SISCODE European project. In Proceedings of the Fab 16 Research Papers Stream (pp. 141-153). https://hdl.handle.net/11311/1206081 Chamorro-Martin, E., Chadha, K. (2021) Hyper-connected hybrid educational models for distributed learning through prototyping, Jornadas sobre Innovaci\u00f3n Docente en Arquitectura. Available at: https://upcommons.upc.edu/handle/2117/356107 2020 \u00b6 Pistofidou, A., Real, M., & Juarez Calvo, M. (2020). Remix El Barrio: A Co-Creation Journey to Foster Innovative Ecosystems Crafting and Micro-Fabricating with Food Surplus and Waste. Creative Food Cycles-Book 1, 185-195. https://www.repo.uni-hannover.de/handle/123456789/10176 Sollazzo, A., Colliaux, D., Garivani, S., Minchin, J., Garlanda, L., & Hanappe, P. (2020). Automated vegetable growth analysis from outdoor images acquired with a cablebot. In Proceedings of the IEEE International Conference on Computer Vision Workshops. https://www.plant-phenotyping.org/lw_resource/datapool/systemfiles/elements/files/cb52dc44-eb90-11ea-908c-dead53a91d31/current/document/W0008.pdf Armstrong, K., Whaman, E., Schafer, L., Bugge Henriksen, C., & Wascher, D. (2020). Foodshift 2030: A Citizen-Driven Transition of the European Food System (EU Horizon Project). Creative Food Cycles-Book 1, 313-321. https://www.repo.uni-hannover.de/handle/123456789/10187 Menichinelli, M., & Schmidt, A. G. S. (2020). First exploratory geographical and social maps of the maker movement. European Journal of Creative Practices in Cities and Landscapes, 2(2), 35-62. https://cpcl.unibo.it/article/view/9640 Diez, T., Tomico, O., & Quintero, M. (2020). Exploring Weak Signals to Design and Prototype for Emergent Futures. Temes de Disseny, (36), 70-89. https://www.raco.cat/index.php/Temes/article/view/373819 Munoz-Unceta, P., Hausleitner, B., & D\u0105browski, M. (2020). Socio-spatial segregation and the spatial structure of \u2018ordinary\u2019activities in the Global South. Urban Planning, 5(3), 303-318. https://www.cogitatiopress.com/urbanplanning/article/view/3047 Mahajan, S., Kumar, P., Camprodon, G., \u2026 & Forino, G. (2020). A citizen science approach for enhancing public understanding of air pollution. Sustainable Cities and Society, 52, 101800. https://www.sciencedirect.com/science/article/abs/pii/S2210670719317020 Kuula, J., M\u00e4kel\u00e4, T., Aurela, M., Teinil\u00e4, K., Varjonen, S., Gonz\u00e1lez, \u00d3., & Timonen, H. (2020). Laboratory evaluation of particle-size selectivity of optical low-cost particulate matter sensors. Atmospheric Measurement Techniques, 13(5), 2413-2423. https://amt.copernicus.org/articles/13/2413/2020/ Real, M., Lizarralde, I., & Tyl, B. (2020). Exploring Local Business Model Development for Regional Circular Textile Transition in France. Fashion Practice, 12(1), 6-33. https://www.tandfonline.com/doi/abs/10.1080/17569370.2020.1716546 Menichinelli, M., Velis, E., Rocha, A., & Schmidt, A. (2021). Collaborative ontology design for Open Hardware and Open Design. In Design Culture (s). Cumulus Conference Proceedings Roma 2021, Volume# 2 (pp. 1535-1550). Cumulus, Aalto University. https://researchrepository.rmit.edu.au/esploro/outputs/9922026566301341 Armstrong, K. (2020). Distributed Design: A Platform Approach Towards More Inclusive, Plural Futures for Design. Making Futures Journal Volume VI. ISSN 2042-1664 https://makingfutures.pca.ac.uk/journal/kate-armstrong Minchin, J. (2020). ROMI: Robotics for Microfarming. Open Access Government https://www.openaccessgovernment.org/romi-robotics-for-microfarming/80533/ 2019 \u00b6 Camprodon, G., Gonz\u00e1lez, \u00d3., Barber\u00e1n, V., P\u00e9rez, M., Sm\u00e1ri, V., de Heras, M. \u00c1., & Bizzotto, A. (2019). Smart Citizen Kit and Station: An open environmental monitoring system for citizen participation and scientific experimentation. HardwareX, 6, e00070. https://doi.org/10.1016/j.ohx.2019.e00070 Real, M., & Calvo, M. (2019, October). Boosting co-creation practices in makespaces to support the design of more empowering and circular food systems at a neighbourhood scale. In ERSCP 2019 (Vol. 1, pp. p-831). https://hal.archives-ouvertes.fr/hal-02387713/ 2018 \u00b6 Woods, M., Balestrini, M., Bejtullahu, S., Bocconi, S., Boerwinkel, G., Boonstra, M., Camprodon, G., Diez, T., \u2026 & Seiz, G. (2018). Citizen sensing: a toolkit. https://eprints.whiterose.ac.uk/148521/ Diez, T. (2018). Fab city: the mass distribution of (almost) everything. IAAC: Barcelona, Spain. 2017 \u00b6 Balestrini, M., Seiz, G., Pe\u00f1a, L. L., & Camprodon, G. (2017). Onboarding communities to the IoT. In Internet Science: 4 th International Conference, INSCI 2017, Thessaloniki, Greece, November 22-24, 2017, Proceedings 4 (pp. 19-27). Springer International Publishing. https://link.springer.com/chapter/10.1007/978-3-319-70284-1_2 2016 \u00b6 Guti\u00e9rrez, V., Theodoridis, E., Mylonas, G., Shi, F., Adeel, U., Diez, L., Camprodon, G., \u2026 & Mu\u00f1oz, L. (2016). Co-creating the cities of the future. Sensors, 16(11), 1971. https://doi.org/10.3390/s16111971 Hemment, D., Woods, M., Skalsky, R., Buontempo, C., Neilson, R., Khawaja, M., Georgiadis, P., Caon, L., Xaver, A., van der Velden, N., Cobley, A., Taylor, N., Georgiou, S., Mollfulleda, A., Knippers, T., Bouvard, J., Rowan, J., Diez, T., Dobos, E., \u2026 Poynton, S. (2016). Collective Intelligence and Participatory Citizen Science for Growing for Food and Sustainable Land Use. Paper presented at European Citizen Science Association Conference 2016, Berlin, Germany. https://discovery.dundee.ac.uk/en/publications/collective-intelligence-and-participatory-citizen-science-for-gro","title":"Papers and Posters"},{"location":"research/publications/Journals%20and%20Papers/#papers-and-posters","text":"","title":"Papers and Posters"},{"location":"research/publications/Journals%20and%20Papers/#2024","text":"Panneels, I., Lechelt, S., Schmidt, A., & Co\u015fkun, A. (2024). Data-driven innovation for sustainable practice in the creative economy. https://doi.org/10.4324/9781003365891-11","title":"2024"},{"location":"research/publications/Journals%20and%20Papers/#2023","text":"Nadal, O. and Dom\u00ednguez,X. (2023). Integration of the maker movement in the classroom: a practical experience in the first year of an educational project. UTE Teaching & Technology (Universitas Tarraconensis), (1), e3566. https://doi.org/10.17345/ute.2023.3566 Mashhoodi, B., & Mu\u00f1oz-Unceta, P. (2023). Regional allocation of EV chargers\u2019 grid load. Annals of GIS, 0(0), 1\u201315. https://doi.org/10.1080/19475683.2023.2166111","title":"2023 \ud83d\udea7"},{"location":"research/publications/Journals%20and%20Papers/#2022","text":"Solanas, O., Usart, M., Valls, C., Dom\u00ednguez, X. (2022). Metodolog\u00eda STEAM-Maker en primaria: un estudio mixto. Publicado en el libro de actas \u201cEducaci\u00f3n transformadora en un mundo digital: Conectando paisajes de aprendizaje\u201d (pg 272-274) del XXV Congreso Internacional Edutec 2022. https://edutec2022.uib.es/libro-de-actas/ Gerodimou, M.D., Chamorro-Martin, E., & Fuentemilla, S. (2022). Developing maker-centred learning programs to promote critical thinking about technology and design for emergent futures. Proceedings of the Fab 17 Research Papers Stream, 145\u2013159. https://doi.org/10.5281/zenodo.7432107 Ferro, C., Mu\u00f1oz Unceta, P., Fontana Valenti, C., Jusic, I., Cingolani, F., Diez Ladera, T., & Parikh, M. (2022). Fab City Hubs: Interfaces for community building and playgrounds for new innovative urban actions. Proceedings of the Fab 17 Research Papers Stream, 19\u201334. https://doi.org/10.5281/zenodo.7432052 Gerodimou, M.D., Chamorro, E., & Fuentemilla, S. (2022). Developing maker-centred learning programs to promote critical thinking about technology and design for emergent futures. Proceedings of the Fab 17 Research Papers Stream, 145\u2013159. https://doi.org/10.5281/zenodo.7432107 Burdiles Araneda, I. M., Dominguez, X., Real, M., Fuentemilla, S., & Pistofidou, A. (2022, May). Remix The School Project: Socio-Emotional Learning through Biomaterial making: A Methodology for Self-Awareness through Bio-material fabrication for teachers and children. In 6 th FabLearn Europe/MakeEd Conference 2022 (pp. 1-5). https://doi.org/10.1145/3535227.3535242 Bilgin, A. S., Molina Ascanio, M., Milanovic, I., Kirsch, M., Beernaert, Y., Sotiriou, S., Gregori Montaner, A., Cornakov, S., Velner, G., Axisa, J. , Wellens, T., Muscat, M., Vaidelis, G., Messaritou, M., Go\u017adzik, A., Castilla Mora, L., Ivanova, I., Dariou, E., Yuste, A., Preda, E., Quarta, B., B. Dom\u00ednguez, X., Kesting, F., Katikas, L., Mitic-Radulovic, A., Gras-Velazquez, A. (2022), STEM in the future: Transforming education for sustainability, Scientix Observatory, October 2022. http://files.eun.org/scientix/Bilgin_et_al_2022_STEM_in_the_Future_Final-to-publish-2.pdf Munoz-Unceta, P., Mashhoodi, B. (2022). Mobility, electricity, and parking data for EV infrastructure in the Amsterdam Metropolitan Area, Data in Brief, Volume 42, 2022, 108270, ISSN 2352-3409, https://doi.org/10.1016/j.dib.2022.108270 Furlan, C., Wandl, A., Cavalieri, C., Munoz-Unceta, P. (2022). Territorialising Circularity. In: Amenta, L., Russo, M., van Timmeren, A. (eds) Regenerative Territories. GeoJournal Library, vol 128. Springer, Cham. https://doi.org/10.1007/978-3-030-78536-9_2 Cabrera Galinzed, A., Pistofidou, A. (2022) From Textiles to Soft Robotics and the Emergent Approaches in STEAM and Textile Labs. In: Conference Proceedings. The Future of Education 2022. https://conference.pixel-online.net/FOE/files/foe/ed0012/FP/7865-ADU5593-FP-FOE12.pdf Munoz-Unceta, P., Lambert S., Pazaitis A. (2022) A citizen-oriented and circular-fabrication approach to productive cities and local resilience. The Fab City framework applied in the industrial historic centres of Barcelona, Milan and Tallinn, Urban Transitions Conference, 2022, Barcelona. https://www.researchgate.net/publication/365409209_How_can_citizen-oriented_local_actio [\u2026]native_more_resilient_sustainable_and_inclusive_city_model Earley, R., Hornbuckle R., Real, M, Hall, K. (2022) Designing the Circular Design Team, DRS Workshop 2022. https://ualresearchonline.arts.ac.uk/id/eprint/18614/ https://ualresearchonline.arts.ac.uk/id/eprint/18614/2/DRS2022-Workshop-CCD_Proposal%20V2.pdf Real, M., Pierite, JL., Quintero, M. (2022) Designing Reservist Cells in time of crisis, DRS Workshop 2022. Real, M., Pistofidou, A., Juarez-Calvos, M. (2022) FabLab Barcelona\u2014Co-design With Food Surplus: Better Redistributing, Upcycling and Composting. Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools, 2022, 37-46. https://link.springer.com/chapter/10.1007/978-3-030-78733-2_4 Real, M, Schmittinger, F. (2022) A Framework for Experimenting Co-creation in Real-Life Contexts. Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools, 2022, 11-24. https://link.springer.com/chapter/10.1007/978-3-030-78733-2_2 Wei, Y., Markopoulou, A., Zhu, Y., Chamorro-Martin, E., Kirova, N. (2022). Additive Manufacture of Cellulose Based Bio-Material on Architectural Scale. In: Yuan, P.F., Chai, H., Yan, C., Leach, N. (eds) Proceedings of the 2021 DigitalFUTURES. CDRF 2021. Springer, Singapore. https://doi.org/10.1007/978-981-16-5983-6_27","title":"2022 \ud83d\udea7"},{"location":"research/publications/Journals%20and%20Papers/#2021","text":"Cabrera, A., Pistofidou, A., Real, M., Sykes, S., Czeschik, A., & Marsh, J. (2021). Innovation Ecosystem for women makers through textiles labs and the shemakes. eu approach. In Proceedings of the Fab 16 Research Papers Stream (pp. 221-239). https://doi.org/10.5281/zenodo.5169851 Maccani, G., Errandonea, L., Righi, V., Camprodon, G., & Galli, J. (2021). VenicAIRE. Quaderns d\u2019arquitectura i urbanisme, (Biennale), 74-81. https://raco.cat/index.php/QuadernsArquitecturaUrbanisme/article/view/392968 Sedini, C., Rasmussen, A. N., Marion, R., & Cipriani, L. (2021). Co-creating social and sustainable innovation in Makerspaces and Fab Labs. Lessons learnt from the SISCODE European project. In Proceedings of the Fab 16 Research Papers Stream (pp. 141-153). https://hdl.handle.net/11311/1206081 Chamorro-Martin, E., Chadha, K. (2021) Hyper-connected hybrid educational models for distributed learning through prototyping, Jornadas sobre Innovaci\u00f3n Docente en Arquitectura. Available at: https://upcommons.upc.edu/handle/2117/356107","title":"2021"},{"location":"research/publications/Journals%20and%20Papers/#2020","text":"Pistofidou, A., Real, M., & Juarez Calvo, M. (2020). Remix El Barrio: A Co-Creation Journey to Foster Innovative Ecosystems Crafting and Micro-Fabricating with Food Surplus and Waste. Creative Food Cycles-Book 1, 185-195. https://www.repo.uni-hannover.de/handle/123456789/10176 Sollazzo, A., Colliaux, D., Garivani, S., Minchin, J., Garlanda, L., & Hanappe, P. (2020). Automated vegetable growth analysis from outdoor images acquired with a cablebot. In Proceedings of the IEEE International Conference on Computer Vision Workshops. https://www.plant-phenotyping.org/lw_resource/datapool/systemfiles/elements/files/cb52dc44-eb90-11ea-908c-dead53a91d31/current/document/W0008.pdf Armstrong, K., Whaman, E., Schafer, L., Bugge Henriksen, C., & Wascher, D. (2020). Foodshift 2030: A Citizen-Driven Transition of the European Food System (EU Horizon Project). Creative Food Cycles-Book 1, 313-321. https://www.repo.uni-hannover.de/handle/123456789/10187 Menichinelli, M., & Schmidt, A. G. S. (2020). First exploratory geographical and social maps of the maker movement. European Journal of Creative Practices in Cities and Landscapes, 2(2), 35-62. https://cpcl.unibo.it/article/view/9640 Diez, T., Tomico, O., & Quintero, M. (2020). Exploring Weak Signals to Design and Prototype for Emergent Futures. Temes de Disseny, (36), 70-89. https://www.raco.cat/index.php/Temes/article/view/373819 Munoz-Unceta, P., Hausleitner, B., & D\u0105browski, M. (2020). Socio-spatial segregation and the spatial structure of \u2018ordinary\u2019activities in the Global South. Urban Planning, 5(3), 303-318. https://www.cogitatiopress.com/urbanplanning/article/view/3047 Mahajan, S., Kumar, P., Camprodon, G., \u2026 & Forino, G. (2020). A citizen science approach for enhancing public understanding of air pollution. Sustainable Cities and Society, 52, 101800. https://www.sciencedirect.com/science/article/abs/pii/S2210670719317020 Kuula, J., M\u00e4kel\u00e4, T., Aurela, M., Teinil\u00e4, K., Varjonen, S., Gonz\u00e1lez, \u00d3., & Timonen, H. (2020). Laboratory evaluation of particle-size selectivity of optical low-cost particulate matter sensors. Atmospheric Measurement Techniques, 13(5), 2413-2423. https://amt.copernicus.org/articles/13/2413/2020/ Real, M., Lizarralde, I., & Tyl, B. (2020). Exploring Local Business Model Development for Regional Circular Textile Transition in France. Fashion Practice, 12(1), 6-33. https://www.tandfonline.com/doi/abs/10.1080/17569370.2020.1716546 Menichinelli, M., Velis, E., Rocha, A., & Schmidt, A. (2021). Collaborative ontology design for Open Hardware and Open Design. In Design Culture (s). Cumulus Conference Proceedings Roma 2021, Volume# 2 (pp. 1535-1550). Cumulus, Aalto University. https://researchrepository.rmit.edu.au/esploro/outputs/9922026566301341 Armstrong, K. (2020). Distributed Design: A Platform Approach Towards More Inclusive, Plural Futures for Design. Making Futures Journal Volume VI. ISSN 2042-1664 https://makingfutures.pca.ac.uk/journal/kate-armstrong Minchin, J. (2020). ROMI: Robotics for Microfarming. Open Access Government https://www.openaccessgovernment.org/romi-robotics-for-microfarming/80533/","title":"2020"},{"location":"research/publications/Journals%20and%20Papers/#2019","text":"Camprodon, G., Gonz\u00e1lez, \u00d3., Barber\u00e1n, V., P\u00e9rez, M., Sm\u00e1ri, V., de Heras, M. \u00c1., & Bizzotto, A. (2019). Smart Citizen Kit and Station: An open environmental monitoring system for citizen participation and scientific experimentation. HardwareX, 6, e00070. https://doi.org/10.1016/j.ohx.2019.e00070 Real, M., & Calvo, M. (2019, October). Boosting co-creation practices in makespaces to support the design of more empowering and circular food systems at a neighbourhood scale. In ERSCP 2019 (Vol. 1, pp. p-831). https://hal.archives-ouvertes.fr/hal-02387713/","title":"2019"},{"location":"research/publications/Journals%20and%20Papers/#2018","text":"Woods, M., Balestrini, M., Bejtullahu, S., Bocconi, S., Boerwinkel, G., Boonstra, M., Camprodon, G., Diez, T., \u2026 & Seiz, G. (2018). Citizen sensing: a toolkit. https://eprints.whiterose.ac.uk/148521/ Diez, T. (2018). Fab city: the mass distribution of (almost) everything. IAAC: Barcelona, Spain.","title":"2018"},{"location":"research/publications/Journals%20and%20Papers/#2017","text":"Balestrini, M., Seiz, G., Pe\u00f1a, L. L., & Camprodon, G. (2017). Onboarding communities to the IoT. In Internet Science: 4 th International Conference, INSCI 2017, Thessaloniki, Greece, November 22-24, 2017, Proceedings 4 (pp. 19-27). Springer International Publishing. https://link.springer.com/chapter/10.1007/978-3-319-70284-1_2","title":"2017"},{"location":"research/publications/Journals%20and%20Papers/#2016","text":"Guti\u00e9rrez, V., Theodoridis, E., Mylonas, G., Shi, F., Adeel, U., Diez, L., Camprodon, G., \u2026 & Mu\u00f1oz, L. (2016). Co-creating the cities of the future. Sensors, 16(11), 1971. https://doi.org/10.3390/s16111971 Hemment, D., Woods, M., Skalsky, R., Buontempo, C., Neilson, R., Khawaja, M., Georgiadis, P., Caon, L., Xaver, A., van der Velden, N., Cobley, A., Taylor, N., Georgiou, S., Mollfulleda, A., Knippers, T., Bouvard, J., Rowan, J., Diez, T., Dobos, E., \u2026 Poynton, S. (2016). Collective Intelligence and Participatory Citizen Science for Growing for Food and Sustainable Land Use. Paper presented at European Citizen Science Association Conference 2016, Berlin, Germany. https://discovery.dundee.ac.uk/en/publications/collective-intelligence-and-participatory-citizen-science-for-gro","title":"2016"},{"location":"tags.html","text":"Contents grouped by tag \u00b6 education \u00b6 Program template eu project \u00b6 Pop-Machina experimental \u00b6 Precious Plastic Sheetpress Precious Plastic Shredder fabrication \u00b6 Fabrication resources Machines Precious Plastic Sheetpress Precious Plastic Shredder Prusa MK3 Dibond Machine template Material template guides \u00b6 Guides mkdocs documentation machines \u00b6 Machines Precious Plastic Sheetpress Precious Plastic Shredder Prusa MK3 material processing \u00b6 Precious Plastic Shredder materials \u00b6 Materials Dibond programs \u00b6 Programs MDEF Fabacademy Fabricademy template \u00b6 Machine template Material template Program template templates \u00b6 Templates","title":"Tags"},{"location":"tags.html#contents-grouped-by-tag","text":"","title":"Contents grouped by tag"},{"location":"tags.html#education","text":"Program template","title":"education"},{"location":"tags.html#eu-project","text":"Pop-Machina","title":"eu project"},{"location":"tags.html#experimental","text":"Precious Plastic Sheetpress Precious Plastic Shredder","title":"experimental"},{"location":"tags.html#fabrication","text":"Fabrication resources Machines Precious Plastic Sheetpress Precious Plastic Shredder Prusa MK3 Dibond Machine template Material template","title":"fabrication"},{"location":"tags.html#guides","text":"Guides mkdocs documentation","title":"guides"},{"location":"tags.html#machines","text":"Machines Precious Plastic Sheetpress Precious Plastic Shredder Prusa MK3","title":"machines"},{"location":"tags.html#material-processing","text":"Precious Plastic Shredder","title":"material processing"},{"location":"tags.html#materials","text":"Materials Dibond","title":"materials"},{"location":"tags.html#programs","text":"Programs MDEF Fabacademy Fabricademy","title":"programs"},{"location":"tags.html#template","text":"Machine template Material template Program template","title":"template"},{"location":"tags.html#templates","text":"Templates","title":"templates"}]} \ No newline at end of file +{"config":{"indexing":"full","lang":["en"],"min_search_length":3,"prebuild_index":false,"separator":"[\\s\\-]+"},"docs":[{"location":"","text":"Welcome to the knowledge hub of Fab Lab Barcelona ! You might have visited this content in the past using our wiki , and have worked on the old wiki page and moved it here. This documentation, as well as everything we do is open source and free as in freedom . The source code of this documentation can be found in this github repository . If you find a problem, please, open an issue or make a pull request! If you are contributing a project, a machine, a process, or whatever please, use the templates on each section. Fabrication Fabrication description here... Guides Guides description here... Research Research description here... Programs Programs description here... .md-header-nav__title{ font-size: 18px; font-weight: 600; } h1{ display: none; } .md-content__button.md-icon, .md-sidebar, .md-tabs, .md-footer-nav { display: none; } .md-content{ max-width: none; }","title":"Home"},{"location":"fabrication/","tags":["fabrication"],"text":"fabrication Fabrication Resources \u00b6 PRECIOUS PLASTIC SHEETPRESS The Precious Plastic Sheetpress! 12/09/2022 contributors: Christy Cairns and D\u00eddac Torrent PRECIOUS PLASTIC SHREDDER The Precious Plastics Shredder! 13/09/2022 contributors: Christy Cairns and D\u00eddac Torrent PRUSA MK3 A nice machine! 03/01/2022 contributors: Pepito Grillo DIBOND Dibond is a composite material that can get machined to make quite nice designs 03/01/2022 contributors: Anto\u00f1ito MACHINE TEMPLATE MATERIAL TEMPLATE","title":"Fabrication resources"},{"location":"fabrication/#fabrication-resources","text":"","title":"Fabrication Resources"},{"location":"fabrication/machines/","tags":["machines","fabrication"],"text":"machines fabrication Machines \u00b6 PRECIOUS PLASTIC SHEETPRESS The Precious Plastic Sheetpress! 12/09/2022 contributors: Christy Cairns and D\u00eddac Torrent PRECIOUS PLASTIC SHREDDER The Precious Plastics Shredder! 13/09/2022 contributors: Christy Cairns and D\u00eddac Torrent PRUSA MK3 A nice machine! 03/01/2022 contributors: Pepito Grillo","title":"Machines"},{"location":"fabrication/machines/#machines","text":"","title":"Machines"},{"location":"fabrication/machines/precious_plastic_sheet_press/","tags":["machines","experimental","fabrication"],"text":"machines experimental fabrication Precious Plastic Sheetpress \u00b6 Technical specifications \u00b6 Brand: Fab Lab Barcelona (concept by Precious Plastic) Work area: Laser cutting room Materials: Thermoplastics (PLA, HDPE, LDPE, PET, PP, PS\u2026), biomaterials, other Technology: Heating, pressing, moulding Machine parts: ///MACHINE PARTS DIAGRAM/// Applications \u00b6 Creating sheets (from 3mm to 15mm thick) with thermoplastics. The size of the sheet depends on the frame used. Using the pressure to compress a material. Using the heated platforms to melt a material. Precious Plastic sheet examples | PLA cuttlery by D\u00eddac Torrent (@torrent.fab) | Birdhouse by Adai Suri\u00f1ach (unknown design) Health & Safety \u00b6 CAUTION: This machine is highly exposed to the user. The platforms can reach very hot temperatures (over 300\u00b0C), so it is important to be well protected and to follow the operating instructions. Safety information: - Be always aware of the temperature of both platforms. - Use welding gloves to manipulate anything between the two platforms of the press when the heat is ON. - Some thermoplastics expel toxic fumes when melted. Use safety goggles and mask if needed. - Be careful with long hair and other stuff that can get caught by the press. - Don\u2019t use more pressure than what is needed. This could damage the machine. - Don\u2019t use earphones. Being able to hear and smell is fundamental when using Precious Plastic machines. - Safety button just turns off the machine, but platforms take long to cool down. - IF YOU HAVE ANY DOUBT, ASK! :) Operation \u00b6 CONTROL BOX OPERATION PROCEDURE 1. Plug in the Sheetpress, check that the emergency stop (b) is released and switch on the main power switch (a) . 2. Check the required temperature to melt your type of plastic and set the plate temperature controllers (f+h) to this temperature. 3. Set a time of the timer (d) , this can be the specific time reuired for the process or an arbitrary amount. The press will not begin to heat if a time is not set. 4. Close the pressing plates using the bottle jack and wait for them to heat up. 5. When the Sheetpress is at the desired temperature, open the pressing plates of the Sheetpress by releasing pressure from the bottle jack. 6. Place the bottom aluminium sheet on the bottom platform and apply a layer of silicone oil or suitbale lubricant. Make sure to remove any remnants of the previous sheet. 7. Place the mould frame on the bottom aluminium sheet. 8. Load the plastic into the mould. 9. Spread the plastic evenly across the area inside the mould frame. It\u2019s recommended to put slightly less material around a 100mm border offset on the inside of the edges. 10. Oil the other part of the mould (that comes inside of the frame) and place the oiled side facing down on top of the spread plastic. 11. Close the pressing plates using the bottle jack until the pressure gauge reads the desired pressure. Do not exceed 5 tons. 12. Keep monitoring the pressure. Plastic reduces its size when it melts. 13. When the mould has been in the Sheetpress for the required melting time, switch off the Sheetpress and allow to cool in situ. 14. Alternatively you can take out the mould and allow the sheet to cool externally. 15. Once everything has cooled down, clean the aluminium sheet and mould and make sure the machine is ready to use. You can see an example of the procedure here: Making a PLA sheet at Fab Lab Barcelona by D\u00eddac Torrent TROUBLESHOOTING Plates are not heating: Timer (d) not set. | Power indicators (e+g) not illuminated. | Emergency power off mushroom button (c.) engaged. Press is creating fumes or smoke: Check that the temperatures are set correctly for the material being used. | Check no plastic material is in direct contact with heated plates. USEFUL INFORMATION AND TIPS Don\u2019t retract the plate further than you need as the jack moves in very small increments and it takes a long time to raise the plate. Materials settings \u00b6 These are some of the settings tested for the different thermoplastics to create sheets of different thicknesses. Maintenance \u00b6 Borrowed from Precious Plastic: Sheetpress Maintenance by Precious Plastic WEEKLY - Clean the heating plates: Scrape any remiant material from the heating plates. You may need to use a high volume alcohol if there is heavy corrosion. - Grease rails: Use a wooden spatula to apply a liberal amount of grease to all the rails. MONTHLY - Inspect and replace mould sheets: Inspect your mould sheets, if any of them are damaged beyond repair then they may need replacing. - Check website for hacks/updates: The community are continuously developing hacks, modifications and techniques which get shared on the internet, take a look to see what is there that can help or inspire you! YEARLY - Deep clean heating plates: Scrape any remiant material from the heating plates. You may need to use a high volume alcohol if there is heavy corrosion. You may also need to use a rotary sander to remove tough burnt on material but be gentle, use a high grit sandpaper (>220) to preserve the flatness of the sheet. - Check oil in jacks: Bleed and replace the oil in the jacks. - Check electronics: Check the resistance of your elements on each of the three phases is equal to the number of heating elements attached to each phase. If it does not one of your heating elements may be broken, use a thermal camera to check. Check all the components inside the enclosure for visual signs of melting/burning and replace anything that appears damaged. Re paint worn areas Check the body panels and frame for signs of ware, repaint any exposed metal to protect it from corrosion. External resources \u00b6 Suppliers User Manual Info page","title":"Precious Plastic Sheetpress"},{"location":"fabrication/machines/precious_plastic_sheet_press/#precious-plastic-sheetpress","text":"","title":"Precious Plastic Sheetpress"},{"location":"fabrication/machines/precious_plastic_sheet_press/#technical-specifications","text":"Brand: Fab Lab Barcelona (concept by Precious Plastic) Work area: Laser cutting room Materials: Thermoplastics (PLA, HDPE, LDPE, PET, PP, PS\u2026), biomaterials, other Technology: Heating, pressing, moulding Machine parts: ///MACHINE PARTS DIAGRAM///","title":"Technical specifications"},{"location":"fabrication/machines/precious_plastic_sheet_press/#applications","text":"Creating sheets (from 3mm to 15mm thick) with thermoplastics. The size of the sheet depends on the frame used. Using the pressure to compress a material. Using the heated platforms to melt a material. Precious Plastic sheet examples | PLA cuttlery by D\u00eddac Torrent (@torrent.fab) | Birdhouse by Adai Suri\u00f1ach (unknown design)","title":"Applications"},{"location":"fabrication/machines/precious_plastic_sheet_press/#health-safety","text":"CAUTION: This machine is highly exposed to the user. The platforms can reach very hot temperatures (over 300\u00b0C), so it is important to be well protected and to follow the operating instructions. Safety information: - Be always aware of the temperature of both platforms. - Use welding gloves to manipulate anything between the two platforms of the press when the heat is ON. - Some thermoplastics expel toxic fumes when melted. Use safety goggles and mask if needed. - Be careful with long hair and other stuff that can get caught by the press. - Don\u2019t use more pressure than what is needed. This could damage the machine. - Don\u2019t use earphones. Being able to hear and smell is fundamental when using Precious Plastic machines. - Safety button just turns off the machine, but platforms take long to cool down. - IF YOU HAVE ANY DOUBT, ASK! :)","title":"Health & Safety"},{"location":"fabrication/machines/precious_plastic_sheet_press/#operation","text":"CONTROL BOX OPERATION PROCEDURE 1. Plug in the Sheetpress, check that the emergency stop (b) is released and switch on the main power switch (a) . 2. Check the required temperature to melt your type of plastic and set the plate temperature controllers (f+h) to this temperature. 3. Set a time of the timer (d) , this can be the specific time reuired for the process or an arbitrary amount. The press will not begin to heat if a time is not set. 4. Close the pressing plates using the bottle jack and wait for them to heat up. 5. When the Sheetpress is at the desired temperature, open the pressing plates of the Sheetpress by releasing pressure from the bottle jack. 6. Place the bottom aluminium sheet on the bottom platform and apply a layer of silicone oil or suitbale lubricant. Make sure to remove any remnants of the previous sheet. 7. Place the mould frame on the bottom aluminium sheet. 8. Load the plastic into the mould. 9. Spread the plastic evenly across the area inside the mould frame. It\u2019s recommended to put slightly less material around a 100mm border offset on the inside of the edges. 10. Oil the other part of the mould (that comes inside of the frame) and place the oiled side facing down on top of the spread plastic. 11. Close the pressing plates using the bottle jack until the pressure gauge reads the desired pressure. Do not exceed 5 tons. 12. Keep monitoring the pressure. Plastic reduces its size when it melts. 13. When the mould has been in the Sheetpress for the required melting time, switch off the Sheetpress and allow to cool in situ. 14. Alternatively you can take out the mould and allow the sheet to cool externally. 15. Once everything has cooled down, clean the aluminium sheet and mould and make sure the machine is ready to use. You can see an example of the procedure here: Making a PLA sheet at Fab Lab Barcelona by D\u00eddac Torrent TROUBLESHOOTING Plates are not heating: Timer (d) not set. | Power indicators (e+g) not illuminated. | Emergency power off mushroom button (c.) engaged. Press is creating fumes or smoke: Check that the temperatures are set correctly for the material being used. | Check no plastic material is in direct contact with heated plates. USEFUL INFORMATION AND TIPS Don\u2019t retract the plate further than you need as the jack moves in very small increments and it takes a long time to raise the plate.","title":"Operation"},{"location":"fabrication/machines/precious_plastic_sheet_press/#materials-settings","text":"These are some of the settings tested for the different thermoplastics to create sheets of different thicknesses.","title":"Materials settings"},{"location":"fabrication/machines/precious_plastic_sheet_press/#maintenance","text":"Borrowed from Precious Plastic: Sheetpress Maintenance by Precious Plastic WEEKLY - Clean the heating plates: Scrape any remiant material from the heating plates. You may need to use a high volume alcohol if there is heavy corrosion. - Grease rails: Use a wooden spatula to apply a liberal amount of grease to all the rails. MONTHLY - Inspect and replace mould sheets: Inspect your mould sheets, if any of them are damaged beyond repair then they may need replacing. - Check website for hacks/updates: The community are continuously developing hacks, modifications and techniques which get shared on the internet, take a look to see what is there that can help or inspire you! YEARLY - Deep clean heating plates: Scrape any remiant material from the heating plates. You may need to use a high volume alcohol if there is heavy corrosion. You may also need to use a rotary sander to remove tough burnt on material but be gentle, use a high grit sandpaper (>220) to preserve the flatness of the sheet. - Check oil in jacks: Bleed and replace the oil in the jacks. - Check electronics: Check the resistance of your elements on each of the three phases is equal to the number of heating elements attached to each phase. If it does not one of your heating elements may be broken, use a thermal camera to check. Check all the components inside the enclosure for visual signs of melting/burning and replace anything that appears damaged. Re paint worn areas Check the body panels and frame for signs of ware, repaint any exposed metal to protect it from corrosion.","title":"Maintenance"},{"location":"fabrication/machines/precious_plastic_sheet_press/#external-resources","text":"Suppliers User Manual Info page","title":"External resources"},{"location":"fabrication/machines/precious_plastic_shredder/","tags":["machines","experimental","material processing","fabrication"],"text":"machines experimental material processing fabrication Precious Plastic Shredder \u00b6 Technical specifications \u00b6 Brand: Fab Lab Barcelona (concept by Precious Plastic) Work area: Laser cutting room Materials: Plastics, wood, fabrics, other Technology: Shredding, grinding Machine parts: ///MACHINE PARTS DIAGRAM/// Applications \u00b6 Primary application is the shredding of materials Application is determined by the thickeness of material vs the strength of the motor. This machine is experimental in its use and there are no hard or fast rules dictating the application. Simply put, start with small amounts of material and proceed with mechanical sympathy to avoid overloading the motor. Health & Safety \u00b6 Familiarise yourself with the location of the emergancy off button Danger from entanglement - The blades of the shredder can be exposed from above and below. Be sure to fit the mesh to the underside of the machine and make sure that these areas are clear of clothing, body parts and amything else that could get caught in them. Danger from material ejection - Depending on the material the shredding process can be quite violent with material be ejected above and below the shredder. Be sure to keep the lid closed on the shredder. Danger from sharp blades - Be careful of the blades when cleaning material from the blades. Where possible use a tool rather than your hands. Danger from circumventing safety protocols - There are protocols in place to help prevent the above dangers. Do not attempt to circumvent these in the operation of the machine. Operation \u00b6 a. main power key switch b. power and operation indicator light (yellow when powered, green when operating) c. direction switch d. warning/error indicator light e. reset button f. emergancy power off mushroom button Check condition of machine and that there is no left material from previous use Fit the mesh protector with the 4 bolts below the shredder Place the collector box under the shredder Gather the sorted material you want to shred Plug in and turn on the machine with the key switch (a.) Place small amounts of material in the hoper. Close the lid Turn the motor on in the forward direction by turning the direction switch (c.) clockwise Continue to shred until all material is processed Turn off the machine with the direction switch and key switch Store the shredded material Clean the machine Maintenance \u00b6 Under normal operation the main mainenace required is cleaning out any material after use. This should be done by the user as part of the use of the machine. Useful information \u00b6 Fit the mesh to the underside of the machine. This can be tricky but is a nessacery step. It is possible to run the machine backwards to clear material with the direction switch. This is a manual operation and works for the duration of the switch being held in the direction. The machine will automatically cut off when the motor is overloaded and the red light will illuminate to notify the operator of an issue. The lid of the shredder has an electronic cutoff that prevents that motor from working while the lid is open. External resources \u00b6 Suppliers User Manual Info page Troubleshooting \u00b6 Blades don\u2019t grab the plastic - Run the machine backward to jostle the material, anti-clockwise on the direction switch (c.) // Reposition the material in the shredder by hand when the machine is off. THe Blades stop turnning mid operation - Is the red light (d.) illuminated? This indicates the motor is overloaded. Switch off machine and remove material or run the machine backwards. Machine will not turn on // blades do not turn - Check that the emergancy stop mushroom button (f.) is not applied. // Check that the lid is correctly closed so that the magnetic safety cut-off is connected.","title":"Precious Plastic Shredder"},{"location":"fabrication/machines/precious_plastic_shredder/#precious-plastic-shredder","text":"","title":"Precious Plastic Shredder"},{"location":"fabrication/machines/precious_plastic_shredder/#technical-specifications","text":"Brand: Fab Lab Barcelona (concept by Precious Plastic) Work area: Laser cutting room Materials: Plastics, wood, fabrics, other Technology: Shredding, grinding Machine parts: ///MACHINE PARTS DIAGRAM///","title":"Technical specifications"},{"location":"fabrication/machines/precious_plastic_shredder/#applications","text":"Primary application is the shredding of materials Application is determined by the thickeness of material vs the strength of the motor. This machine is experimental in its use and there are no hard or fast rules dictating the application. Simply put, start with small amounts of material and proceed with mechanical sympathy to avoid overloading the motor.","title":"Applications"},{"location":"fabrication/machines/precious_plastic_shredder/#health-safety","text":"Familiarise yourself with the location of the emergancy off button Danger from entanglement - The blades of the shredder can be exposed from above and below. Be sure to fit the mesh to the underside of the machine and make sure that these areas are clear of clothing, body parts and amything else that could get caught in them. Danger from material ejection - Depending on the material the shredding process can be quite violent with material be ejected above and below the shredder. Be sure to keep the lid closed on the shredder. Danger from sharp blades - Be careful of the blades when cleaning material from the blades. Where possible use a tool rather than your hands. Danger from circumventing safety protocols - There are protocols in place to help prevent the above dangers. Do not attempt to circumvent these in the operation of the machine.","title":"Health & Safety"},{"location":"fabrication/machines/precious_plastic_shredder/#operation","text":"a. main power key switch b. power and operation indicator light (yellow when powered, green when operating) c. direction switch d. warning/error indicator light e. reset button f. emergancy power off mushroom button Check condition of machine and that there is no left material from previous use Fit the mesh protector with the 4 bolts below the shredder Place the collector box under the shredder Gather the sorted material you want to shred Plug in and turn on the machine with the key switch (a.) Place small amounts of material in the hoper. Close the lid Turn the motor on in the forward direction by turning the direction switch (c.) clockwise Continue to shred until all material is processed Turn off the machine with the direction switch and key switch Store the shredded material Clean the machine","title":"Operation"},{"location":"fabrication/machines/precious_plastic_shredder/#maintenance","text":"Under normal operation the main mainenace required is cleaning out any material after use. This should be done by the user as part of the use of the machine.","title":"Maintenance"},{"location":"fabrication/machines/precious_plastic_shredder/#useful-information","text":"Fit the mesh to the underside of the machine. This can be tricky but is a nessacery step. It is possible to run the machine backwards to clear material with the direction switch. This is a manual operation and works for the duration of the switch being held in the direction. The machine will automatically cut off when the motor is overloaded and the red light will illuminate to notify the operator of an issue. The lid of the shredder has an electronic cutoff that prevents that motor from working while the lid is open.","title":"Useful information"},{"location":"fabrication/machines/precious_plastic_shredder/#external-resources","text":"Suppliers User Manual Info page","title":"External resources"},{"location":"fabrication/machines/precious_plastic_shredder/#troubleshooting","text":"Blades don\u2019t grab the plastic - Run the machine backward to jostle the material, anti-clockwise on the direction switch (c.) // Reposition the material in the shredder by hand when the machine is off. THe Blades stop turnning mid operation - Is the red light (d.) illuminated? This indicates the motor is overloaded. Switch off machine and remove material or run the machine backwards. Machine will not turn on // blades do not turn - Check that the emergancy stop mushroom button (f.) is not applied. // Check that the lid is correctly closed so that the magnetic safety cut-off is connected.","title":"Troubleshooting"},{"location":"fabrication/machines/prusamk3/","tags":["machines","fabrication"],"text":"machines fabrication Prusa MK3 \u00b6 This is an awesome machine!","title":"Prusa MK3"},{"location":"fabrication/machines/prusamk3/#prusa-mk3","text":"This is an awesome machine!","title":"Prusa MK3"},{"location":"fabrication/materials/","tags":["materials"],"text":"materials Materials \u00b6 DIBOND Dibond is a composite material that can get machined to make quite nice designs 03/01/2022 contributors: Anto\u00f1ito","title":"Materials"},{"location":"fabrication/materials/#materials","text":"","title":"Materials"},{"location":"fabrication/materials/dibond/","tags":["materials","fabrication"],"text":"materials fabrication Dibond \u00b6 This is an awesome material!","title":"Dibond"},{"location":"fabrication/materials/dibond/#dibond","text":"This is an awesome material!","title":"Dibond"},{"location":"fabrication/suppliers/","text":"Suppliers \u00b6 The following work-in-progress (WIP) table contains our top (online) materials suppliers. For a more in-depth list, including local providers, please refer to the \u201cLegacy Suppliers\u201d section below. URL Category Type of Materials/Products https://3djake.es 3D Printing 3D printers, filaments, accessories https://anycubic.es 3D Printing 3D printers, resins, filaments https://bambulab.com 3D Printing 3D printers, software, filaments https://createc3d.com 3D Printing 3D printers, filaments, spare parts https://eu.store.bambulab.com 3D Printing 3D printers, filaments, parts https://plotteralia.es 3D Printing 3D printers, filaments, tools https://shop.revopoint3d.com 3D Printing 3D scanners, accessories https://digikey.es Electronics Electronic components, semiconductors https://diotronic.com Electronics Electronic components, development boards https://es.farnell.com Electronics Electronic components, industrial supplies https://es.rs-online.com Electronics Electronic components, tools, test equipment https://mouser.es Electronics Electronic components, semiconductors https://tienda.bricogeek.com Specialty Stores Robotics kits, electronics components Ferreter\u00eda Bonet S.L. DIY and Tools Local Hardware Store C/ de Pere IV, 102, Sant Mart\u00ed, 08005 Barcelona https://bauhaus.es DIY and Tools Tools, building materials, home improvement https://carbidedepot.com DIY and Tools Carbide tools, cutting tools https://leroymerlin.es DIY and Tools Tools, building materials, garden supplies https://manomano.es DIY and Tools Tools, home improvement, garden supplies https://mausa.es DIY and Tools Tools, hardware, industrial supplies https://milbby.com DIY and Tools Craft supplies, art materials https://abacus.coop General Retail Books, stationery, educational materials https://compraonline.alcampo.es General Retail Groceries, household items https://ikea.com General Retail Furniture, home goods, decor https://pccomponentes.com General Retail Electronics, computer hardware, peripherals https://feroca.com Materials and Supplies Resin, silicone, molds, casting materials https://formx.es Materials and Supplies Special effects materials, resins, silicones https://gabarro.com Materials and Supplies Wood, timber, panels, veneer https://quimicsdalmauonline.com Materials and Supplies Chemicals, laboratory supplies https://rajapack.es Materials and Supplies Packaging materials, boxes, tapes https://supermagnete.es Materials and Supplies Magnets, magnetic systems https://alfasoni.com Specialty Stores Audio and music equipment https://casadefieras.es Specialty Stores Handcrafted goods, artisanal products https://cremas-caseras.es Specialty Stores Homemade cosmetic ingredients and kits https://distrigraf.com Specialty Stores Printing and graphic arts supplies https://eltallerdelmodelista.com Specialty Stores Model kits, model making supplies https://forniturasdelarosa.com Specialty Stores Jewelry making supplies, beads, tools https://grown.bio Specialty Stores Sustainable materials, mycelium products https://grupofb.es Specialty Stores Industrial supplies, hardware https://naturitas.es Specialty Stores Natural health products, supplements https://pidiscat.cat Specialty Stores Laboratory and scientific equipment https://pulpoensutinta.com Specialty Stores Printing services, custom prints https://ractem.es Specialty Stores Office furniture, storage solutions https://ratrig.com Specialty Stores CNC machines, aluminum profiles https://robotopia.es Specialty Stores Robotics kits, educational robots https://rubiomonocoat.es Specialty Stores Wood finishes, oils, coatings https://serveiestacio.com Specialty Stores Stationery, art supplies https://suministrosdublan.net Specialty Stores Industrial supplies, maintenance products https://tiendacables.com Specialty Stores Cables, connectors, electronics components https://ultra-lab.net Specialty Stores Digital fabrication tools, maker supplies This table organizes the URLs according to their respective categories. Legacy Suppliers \u00b6 The following table needs to be udpated and merge with the previous one. Name Webpage Address Telephone Email Contact GENERIC PROVIDERS Servei Estacio http://www.serveiestacio.com/ Arag\u00f3 270-272, 08007 Barcelona 93 393 24 10 servei@serveiestacio.com Amazon Amazon.es WE do have a premium account at IAAC - - PAPER & CARDBOARD Raima http://www.raima.cat/ Raima Comtal 27 08002 Barcelona 93 317 49 66 Demco http://www.demco.es/ES/index.html Crta. Dosrius, 254 08440 Cardedeu 93 846 18 91 info@demco.es Vivasa http://www.vivasa.es/es/ Barrio Txako, s/n, Ctra. Nacional 625, 48480 Arrigorriaga 94 648 26 75 ventas@vivasa.es Vegio http://www.papelycarton.com/es/ Garnatxa 12, Parc Empresarial de Cervell\u00f3, 08758 Cervell\u00f3 93 673 05 25 vegio@vegio.es WOOD Maderas Estadella http://www.maderasestadella.com/ Bolivia 235, 08020 Barcelona 932 31 24 12 madesta@infonegocio.com Maderas Gabarro http://www.gabarro.com/es/ Carretera de Torre Romeu, s/n 08202 Sabadell 937 48 48 38 ventas@gabarro.com Manel Stock Maderas http://www.stockmaderas.com/Index.asp Mayor, 16, 44792 Josa 900 37 34 63 info@stockmaderas.com Mausa http://www.mausa.es/ Tirso de Molina 2, 08940 Cornell\u00e0 de Llobregat BCN 933 77 40 50 info@mausa.es Gilabert Fustes http://www.fustesgilabertsa.com/ Rambla de Guip\u00fascoa, 177, 08020 Barcelona 932 32 45 50 Placar www.placar.es Carrer del Cobalt, 73-77, 08907 L\u2019Hospitalet Baobab Fusters Passatge de la Vinyassa, 3 08005 Barcelona 933 09 93 90 Alberch http://www.alberch.com/ Carretera de Matar\u00f3 27, 08910 Badalona 933 89 42 00 fustes@alberch.com Esteba http://www.esteba.com/ macanamero@esteba.cat Send email to Miguel Angel PLASTIC Complas http://www.complasbcn.com/ Taqu\u00edgraf Garriga 170, 08029 Barcelona 902 400 094 bcn@complasbcn.com Sunclear http://www.sunclear.es/ Raiguer s/n, Poligono Industrial El Raiguer, 08160 Montmel\u00f3 Lork Industrias http://www.lorkindustrias.com/ Caracas 11, 08030 Barcelona 933 46 82 12 Linea Grafica Fluvi\u00e0 1-3, 08019 Barcelona 933 03 44 40 Rems Embalajes http://www.remssl.net/ Llull 57-61 1\u00ba 6\u00aa, 08005 Barcelona 934 86 46 46 rems@remssl.net METALS Castells ViIlaseca http://www.castellsvilaseca.com/ Gran Via de les Corts catalanes, 222 93 331 65 00 info@castellsvilaseca.cat Pera Perfiles Welser S.L. http://www.welser.com/es Via Augusta 298, 08017 Barcelona 93 252 30 30 es@welser.com Hierros Iserte, S.A. http://hierrosiserte.com/ Pol. Ind. Can Tapiola, 2 - Nave 10, 08110 Montcada i Reixac, Barcelona 93 572 50 94 info@hierrosiserte.com Miguel HARDWARE STORES Bonet http://www.ferreteriabonetsl.com/ Carrer de Pere IV 102, 08005 Barcelona 933 00 15 82 bonet@ferreteriabonetsl.com Coral SAS http://www.coralsas.eu/ Carrer de Pere IV, 200, 08005 Barcelona 933 09 65 00 Servei Estacio http://www.serveiestacio.com/ Arag\u00f3 270-272, 08007 barcelona 933 93 24 10 servei@serveiestacio.com Bricor http://www.bricor.es/ Plaza de Catalu\u00f1a 14 - 5\u00aa Planta, El Corte Ingl\u00e9s de Plaza de Catalu\u00f1a 08002 Barcelona 933 06 38 00 / 933 17 62 31 info@bricor.es Ferreteria Valls 1900 www.cofac.es Comte d\u2019Urgell 3-5 08011 Barcelona 93 424 33 47 info@valls1900.com Send an email addressed to Manuel Alaball Suministros Industriales Sl www.alaball.com Calle Sepulveda, 46 - BAJOS Barcelona 08015 933252396 ELECTRONICS Diotronics http://www.diotronic.com/ Carrer de Muntaner 49, 08011 Barcelona 933 23 40 23 diotronic@diotronic.com Onda Radio http://www.ondaradio.es/ Gran Via de les Corts Catalanes 581, 08011 Barcelona 934 52 51 00 orsa@ondaradio.es BCN Dynamics http://bcndynamics.com/es/ Sep\u00falveda 61, 08015 Barcelona 931 65 85 80 info@bcndynamics.com Cooking Hacks http://www.cooking-hacks.com/ Escatr\u00f3n 16, Edificio LIBELIUM, 50014 Zaragoza 976 54 74 92 info@cooking-hacks.com Brico Geek http://www.bricogeek.com/shop/ ONLINE Electan http://www.electan.com/arduino-c-337.html ONLINE DigiKey www.digikey.es ONLINE Farnell http://www.es.farnell.com ONLINE RS Amidata http://uk.rs-online.com ONLINE sesaelec http://www.sesaelec.com/ Carrer Ram\u00f3n Turr\u00f3, 106-110, 08005 Barcelona 933 097 bcn@sesaelec.com SENSING http://www.sensores-de-medida.es CALLE PELAYA 4, 1\u00aa PLANTA. 28110 ALGETE - MADRID 916 22 24 38 sensing@sensing.es Gert (German & Spanish) sensores https://sensores-de-presion.blogspot.com LIGHTING Luz Negra http://www.luznegra.net/ Monsoy y Benet http://www.monsoybenet.com/ BCN Servilux http://www.bcnservilux.com/ Barcelona LED http://www.barcelonaled.com/ Calle N\u00e1pols 129, 08025 Barcelona 932 418 081 fran@barcelonaled.com Fran MOLDS AND RESINS Form FX http://www.formfx.es Roc Boronat 39, Local 1, 08005 Barcelona 933 00 57 47 info@formx.es Tecnijoy http://www.tecnijoy.net/index.php C/ Diputaci\u00f3, 10 bajos - 08015 - Barcelona - Spain 93 4266805 tecnijoy@yahoo.es JSagrista (Poliuretano AltaD) http://www.sagristaproducts.com/es/ Lima 1, Nave A 3 08030 Barcelona 932 74 25 42 admon@sagristaproducts.com Alicia / Marco (Tecn.) INP 96 S.L. http://www.inp96.es/ C/ N\u00fa\u00f1ez de Balboa 118, 1\u00ba C, 28006 Madrid 915 63 88 60 administracion@inp96.es Rems (POREX) http://www.remssl.net/ C/ LLull 57-61 1\u00ba 6\u00aa 08005 - BARCELONA 93 486 46 46 rems@remssl.net PlastisolCassa (Porexpan) http://plastisolcassa.com C. Enric Coris, 57 \u00b7 972 46 15 00 plastisol@cassa.com 3D PRINTING FILAMENT AND RESINS Tresdenou http://tresdenou.com/es/ Extrudr http://extrudr.eu/ Ultra-Lab http://ultra-lab.net/ Spot-A Materials http://spotamaterials.com/ MILLING TOOLS - HERCO (CNC Tool Bit Maker) http://www.herco.net/webapp/ C/ Lima 2 local 2 08030 Barcelona Spain Inter Metal Sistemas http://intermetalsistema.com/ Carrer d\u2019 Angel Guimer\u00e0, 16, 08902 Hospitalet de Llobregat 933 32 12 39 info@intermetalsistema.com Zubiola http://www.zubiola.es/ Pol\u00edgono Basterretxe 44, 20720 Azkoitia 943 15 70 56 zubiola@zubiola.es CMT UTENSILI Espa\u00f1a http://www.cmtutensili.com/ Calle 25/31, Pol. Industrial, 46470 Catarroja 961 27 45 00 comercial@cmtutensili.com Esmolats Carucsa S.L. http://www.afiladoscarucsa.com/ Av. Diagonal 103, Sotano D1, 08005 Barcelona 933 08 60 07 afiladoscaruc@gmail.com JHP http://shop.jhp.es/ Avda. Diagonal 177 planta 5, 08018 Barcelona 902 90 09 86 / 932 74 10 54 soporte@jhp.es / info@jhp.net Jesus Boira Comercial T\u00e8cnica S.L. http://www.boiract.cat/ C/ Mas les Vinyes, 19 Pol\u00edgono industrial Mas les Vinyes, 08570 Torell\u00f3 931 80 01 10 boiract@boiract.cat LASER TOOLS Framun http://www.framuntechno.com/es/ Ctra. de Vic Km. 2,6, 08243 Manresa 0034 938 735 142 framun@framun.com II-VI UK LTD. http://www.ii-vi.es/ 21 Burley Road, Oakham, Rutland, LE15 6DH 0044 1 572 759 027 IR.Ventas.ES@II-VI.com Supraform, S.L. http://www.supraform.net/ Carrer de L\u2019Enginy Nave 14, 08850 Gava, Barcelona 0034 936 631 300 supraform@supraform.net CORK Surotecnia http://www.surotecnia.com/index.html Calle Muntaner, 56, 08011 Barcelona 934 534 711 jlleset@surotecnia.com Juan Barnacork (Aka Manufacturas Paulet) http://www.barnacork.com/index.php Carrer de Llull, 47-49, Planta 4 Local 5 933 097 783 info@barnacork.com Montse PAINT http://www.akzonobel.com/es/ TEXTILES // NETS http://www.redesycuerdas.com/ http://yutes.com/ http://www.iaso.es/ Stocks Textiles https://goo.gl/hVwpMY Carrer de T\u00e0nger, 48, 08018 BarcelonaPhone:617 57 01 79 http://www.ribescasals.com/ http://www.ventilador.com/ www.bove-ag.com C/ ctra de l\u2019arbo\u00e7 km 1,6, 08800 Vilanova i la Geltru, 41\u00ba 13\u2019 44.37 , 1\u00ba 41\u2019 59.83 , 41.228991, 1.6999 tel: 938 148 581 mov. 639 302 393 toni@bove-ag.com https://sensordeniveldecombustivel.blogspot.com/2019/08/herramientas-de-sensor-de-combustible.html LEATHER/ fabrics Curtidos Garc\u00eda http://www.curtidosgarcia.com/index.php Calle Hospital 49, 08001 Barcelona http://brambysupply.com/?lang=es Carrer de Sant Pere M\u00e9s Alt, 36, 08003 Barcelona, Spain Mercat dels Encants http://www.encantsbcn.com/es C. Dos de Maig, 186, 08013, Barcelona, El Clot CURTIS CAT www.curtitscat.com Carrer d\u2019Erasme de Janer, 1, 08001 Barcelona, Espa\u00f1a Tel\u00e9fono:+34 934 42 25 68 SMART MATERIALS http://www.inteligentes.org/ mov. 639 302 393 MAGNETS Supermagnete http://www.supermagnete.es/eng/ First 4 magnets http://www.first4magnets.com/ Aiman GZ http://m.aimangz.es/ La boutique del iman http://www.laboutiquedeliman.com/ FIne magnet wires http://www.elektrisola.com/us/home.html DRUGSTORES Parafarmacia Campoamor http://www.parafarmaciacampoamor.com/es/ Avenida de las Adelfas, 45, 03189 Dehesa de Campoamor, Orihuela Costa, Alicante 965 320 584 maria@parafarmaciacampoamor.com Maria Promofarma http://www.promocionesfarma.com/ Av. Diagonal 534, 6\u00ba 2\u00aa, 08006, Barcelona 902 930 918 clientes@promofarma.com RUBBER BELTS Suministros Blasi, S.L. http://blasisl.com/ C/ Arag\u00f3n 441-445, 08013 Barcelona 932 658 592 blasi@blasisl.com M\u00aa Angeles PCB board fabrication http://www.smallbatchassembly.com/ Pneumatics (+pipe and connectors) Asteva http://astevasl.com Carrer Almog\u00e0vers, 80, 08018 Barcelona 933 00 68 11 Barcelona de Fluidos S. Carrer de Llull, 70, 08005 Barcelona 933 00 38 12 Chemicals Manuel Riesgo http://manuelriesgo.com/ C/ Desenga\u00f1o, 22, 28004 Madrid 91 521 61 34 Quimics Dalmau http://quimicsdalmau.com/ Sigma-Aldrich http://www.sigmaaldrich.com web Mechanical components Misumi www.misumi-europe.com RS http://uk.rs-online.com SDP/SI www.sdp-si.com Cim Foundation C/ Llorens i Artigas 12 93 401 71 71 Taller Jordi Basas Vila Sant Gen\u00eds s/n 08719 Jorba Barcelona 938078044 taller@tallerjordibasas.com Precision/Grinding/Polishing Tools DelValle http://www.delvalle.cat/ c/ Bail\u00e8n 58, 08009 BARCELONA 93 265 83 18 delvalle@delvalle.cat Personal Protective Equipment A T Proteccion S.L. https://www.atproteccion.com/ Carrer d\u2019Ausi\u00e0s Marc, 155, 08013 Barcelona https://www.google.com/maps/d/u/0/viewer?hl=es&mid=1EE84VXpfY3PsD3eLO20NmPvtw8U&ll=41.71168544340683%2C6.279241949999914&z=6","title":"Suppliers"},{"location":"fabrication/suppliers/#suppliers","text":"The following work-in-progress (WIP) table contains our top (online) materials suppliers. For a more in-depth list, including local providers, please refer to the \u201cLegacy Suppliers\u201d section below. URL Category Type of Materials/Products https://3djake.es 3D Printing 3D printers, filaments, accessories https://anycubic.es 3D Printing 3D printers, resins, filaments https://bambulab.com 3D Printing 3D printers, software, filaments https://createc3d.com 3D Printing 3D printers, filaments, spare parts https://eu.store.bambulab.com 3D Printing 3D printers, filaments, parts https://plotteralia.es 3D Printing 3D printers, filaments, tools https://shop.revopoint3d.com 3D Printing 3D scanners, accessories https://digikey.es Electronics Electronic components, semiconductors https://diotronic.com Electronics Electronic components, development boards https://es.farnell.com Electronics Electronic components, industrial supplies https://es.rs-online.com Electronics Electronic components, tools, test equipment https://mouser.es Electronics Electronic components, semiconductors https://tienda.bricogeek.com Specialty Stores Robotics kits, electronics components Ferreter\u00eda Bonet S.L. DIY and Tools Local Hardware Store C/ de Pere IV, 102, Sant Mart\u00ed, 08005 Barcelona https://bauhaus.es DIY and Tools Tools, building materials, home improvement https://carbidedepot.com DIY and Tools Carbide tools, cutting tools https://leroymerlin.es DIY and Tools Tools, building materials, garden supplies https://manomano.es DIY and Tools Tools, home improvement, garden supplies https://mausa.es DIY and Tools Tools, hardware, industrial supplies https://milbby.com DIY and Tools Craft supplies, art materials https://abacus.coop General Retail Books, stationery, educational materials https://compraonline.alcampo.es General Retail Groceries, household items https://ikea.com General Retail Furniture, home goods, decor https://pccomponentes.com General Retail Electronics, computer hardware, peripherals https://feroca.com Materials and Supplies Resin, silicone, molds, casting materials https://formx.es Materials and Supplies Special effects materials, resins, silicones https://gabarro.com Materials and Supplies Wood, timber, panels, veneer https://quimicsdalmauonline.com Materials and Supplies Chemicals, laboratory supplies https://rajapack.es Materials and Supplies Packaging materials, boxes, tapes https://supermagnete.es Materials and Supplies Magnets, magnetic systems https://alfasoni.com Specialty Stores Audio and music equipment https://casadefieras.es Specialty Stores Handcrafted goods, artisanal products https://cremas-caseras.es Specialty Stores Homemade cosmetic ingredients and kits https://distrigraf.com Specialty Stores Printing and graphic arts supplies https://eltallerdelmodelista.com Specialty Stores Model kits, model making supplies https://forniturasdelarosa.com Specialty Stores Jewelry making supplies, beads, tools https://grown.bio Specialty Stores Sustainable materials, mycelium products https://grupofb.es Specialty Stores Industrial supplies, hardware https://naturitas.es Specialty Stores Natural health products, supplements https://pidiscat.cat Specialty Stores Laboratory and scientific equipment https://pulpoensutinta.com Specialty Stores Printing services, custom prints https://ractem.es Specialty Stores Office furniture, storage solutions https://ratrig.com Specialty Stores CNC machines, aluminum profiles https://robotopia.es Specialty Stores Robotics kits, educational robots https://rubiomonocoat.es Specialty Stores Wood finishes, oils, coatings https://serveiestacio.com Specialty Stores Stationery, art supplies https://suministrosdublan.net Specialty Stores Industrial supplies, maintenance products https://tiendacables.com Specialty Stores Cables, connectors, electronics components https://ultra-lab.net Specialty Stores Digital fabrication tools, maker supplies This table organizes the URLs according to their respective categories.","title":"Suppliers"},{"location":"fabrication/suppliers/#legacy-suppliers","text":"The following table needs to be udpated and merge with the previous one. Name Webpage Address Telephone Email Contact GENERIC PROVIDERS Servei Estacio http://www.serveiestacio.com/ Arag\u00f3 270-272, 08007 Barcelona 93 393 24 10 servei@serveiestacio.com Amazon Amazon.es WE do have a premium account at IAAC - - PAPER & CARDBOARD Raima http://www.raima.cat/ Raima Comtal 27 08002 Barcelona 93 317 49 66 Demco http://www.demco.es/ES/index.html Crta. Dosrius, 254 08440 Cardedeu 93 846 18 91 info@demco.es Vivasa http://www.vivasa.es/es/ Barrio Txako, s/n, Ctra. Nacional 625, 48480 Arrigorriaga 94 648 26 75 ventas@vivasa.es Vegio http://www.papelycarton.com/es/ Garnatxa 12, Parc Empresarial de Cervell\u00f3, 08758 Cervell\u00f3 93 673 05 25 vegio@vegio.es WOOD Maderas Estadella http://www.maderasestadella.com/ Bolivia 235, 08020 Barcelona 932 31 24 12 madesta@infonegocio.com Maderas Gabarro http://www.gabarro.com/es/ Carretera de Torre Romeu, s/n 08202 Sabadell 937 48 48 38 ventas@gabarro.com Manel Stock Maderas http://www.stockmaderas.com/Index.asp Mayor, 16, 44792 Josa 900 37 34 63 info@stockmaderas.com Mausa http://www.mausa.es/ Tirso de Molina 2, 08940 Cornell\u00e0 de Llobregat BCN 933 77 40 50 info@mausa.es Gilabert Fustes http://www.fustesgilabertsa.com/ Rambla de Guip\u00fascoa, 177, 08020 Barcelona 932 32 45 50 Placar www.placar.es Carrer del Cobalt, 73-77, 08907 L\u2019Hospitalet Baobab Fusters Passatge de la Vinyassa, 3 08005 Barcelona 933 09 93 90 Alberch http://www.alberch.com/ Carretera de Matar\u00f3 27, 08910 Badalona 933 89 42 00 fustes@alberch.com Esteba http://www.esteba.com/ macanamero@esteba.cat Send email to Miguel Angel PLASTIC Complas http://www.complasbcn.com/ Taqu\u00edgraf Garriga 170, 08029 Barcelona 902 400 094 bcn@complasbcn.com Sunclear http://www.sunclear.es/ Raiguer s/n, Poligono Industrial El Raiguer, 08160 Montmel\u00f3 Lork Industrias http://www.lorkindustrias.com/ Caracas 11, 08030 Barcelona 933 46 82 12 Linea Grafica Fluvi\u00e0 1-3, 08019 Barcelona 933 03 44 40 Rems Embalajes http://www.remssl.net/ Llull 57-61 1\u00ba 6\u00aa, 08005 Barcelona 934 86 46 46 rems@remssl.net METALS Castells ViIlaseca http://www.castellsvilaseca.com/ Gran Via de les Corts catalanes, 222 93 331 65 00 info@castellsvilaseca.cat Pera Perfiles Welser S.L. http://www.welser.com/es Via Augusta 298, 08017 Barcelona 93 252 30 30 es@welser.com Hierros Iserte, S.A. http://hierrosiserte.com/ Pol. Ind. Can Tapiola, 2 - Nave 10, 08110 Montcada i Reixac, Barcelona 93 572 50 94 info@hierrosiserte.com Miguel HARDWARE STORES Bonet http://www.ferreteriabonetsl.com/ Carrer de Pere IV 102, 08005 Barcelona 933 00 15 82 bonet@ferreteriabonetsl.com Coral SAS http://www.coralsas.eu/ Carrer de Pere IV, 200, 08005 Barcelona 933 09 65 00 Servei Estacio http://www.serveiestacio.com/ Arag\u00f3 270-272, 08007 barcelona 933 93 24 10 servei@serveiestacio.com Bricor http://www.bricor.es/ Plaza de Catalu\u00f1a 14 - 5\u00aa Planta, El Corte Ingl\u00e9s de Plaza de Catalu\u00f1a 08002 Barcelona 933 06 38 00 / 933 17 62 31 info@bricor.es Ferreteria Valls 1900 www.cofac.es Comte d\u2019Urgell 3-5 08011 Barcelona 93 424 33 47 info@valls1900.com Send an email addressed to Manuel Alaball Suministros Industriales Sl www.alaball.com Calle Sepulveda, 46 - BAJOS Barcelona 08015 933252396 ELECTRONICS Diotronics http://www.diotronic.com/ Carrer de Muntaner 49, 08011 Barcelona 933 23 40 23 diotronic@diotronic.com Onda Radio http://www.ondaradio.es/ Gran Via de les Corts Catalanes 581, 08011 Barcelona 934 52 51 00 orsa@ondaradio.es BCN Dynamics http://bcndynamics.com/es/ Sep\u00falveda 61, 08015 Barcelona 931 65 85 80 info@bcndynamics.com Cooking Hacks http://www.cooking-hacks.com/ Escatr\u00f3n 16, Edificio LIBELIUM, 50014 Zaragoza 976 54 74 92 info@cooking-hacks.com Brico Geek http://www.bricogeek.com/shop/ ONLINE Electan http://www.electan.com/arduino-c-337.html ONLINE DigiKey www.digikey.es ONLINE Farnell http://www.es.farnell.com ONLINE RS Amidata http://uk.rs-online.com ONLINE sesaelec http://www.sesaelec.com/ Carrer Ram\u00f3n Turr\u00f3, 106-110, 08005 Barcelona 933 097 bcn@sesaelec.com SENSING http://www.sensores-de-medida.es CALLE PELAYA 4, 1\u00aa PLANTA. 28110 ALGETE - MADRID 916 22 24 38 sensing@sensing.es Gert (German & Spanish) sensores https://sensores-de-presion.blogspot.com LIGHTING Luz Negra http://www.luznegra.net/ Monsoy y Benet http://www.monsoybenet.com/ BCN Servilux http://www.bcnservilux.com/ Barcelona LED http://www.barcelonaled.com/ Calle N\u00e1pols 129, 08025 Barcelona 932 418 081 fran@barcelonaled.com Fran MOLDS AND RESINS Form FX http://www.formfx.es Roc Boronat 39, Local 1, 08005 Barcelona 933 00 57 47 info@formx.es Tecnijoy http://www.tecnijoy.net/index.php C/ Diputaci\u00f3, 10 bajos - 08015 - Barcelona - Spain 93 4266805 tecnijoy@yahoo.es JSagrista (Poliuretano AltaD) http://www.sagristaproducts.com/es/ Lima 1, Nave A 3 08030 Barcelona 932 74 25 42 admon@sagristaproducts.com Alicia / Marco (Tecn.) INP 96 S.L. http://www.inp96.es/ C/ N\u00fa\u00f1ez de Balboa 118, 1\u00ba C, 28006 Madrid 915 63 88 60 administracion@inp96.es Rems (POREX) http://www.remssl.net/ C/ LLull 57-61 1\u00ba 6\u00aa 08005 - BARCELONA 93 486 46 46 rems@remssl.net PlastisolCassa (Porexpan) http://plastisolcassa.com C. Enric Coris, 57 \u00b7 972 46 15 00 plastisol@cassa.com 3D PRINTING FILAMENT AND RESINS Tresdenou http://tresdenou.com/es/ Extrudr http://extrudr.eu/ Ultra-Lab http://ultra-lab.net/ Spot-A Materials http://spotamaterials.com/ MILLING TOOLS - HERCO (CNC Tool Bit Maker) http://www.herco.net/webapp/ C/ Lima 2 local 2 08030 Barcelona Spain Inter Metal Sistemas http://intermetalsistema.com/ Carrer d\u2019 Angel Guimer\u00e0, 16, 08902 Hospitalet de Llobregat 933 32 12 39 info@intermetalsistema.com Zubiola http://www.zubiola.es/ Pol\u00edgono Basterretxe 44, 20720 Azkoitia 943 15 70 56 zubiola@zubiola.es CMT UTENSILI Espa\u00f1a http://www.cmtutensili.com/ Calle 25/31, Pol. Industrial, 46470 Catarroja 961 27 45 00 comercial@cmtutensili.com Esmolats Carucsa S.L. http://www.afiladoscarucsa.com/ Av. Diagonal 103, Sotano D1, 08005 Barcelona 933 08 60 07 afiladoscaruc@gmail.com JHP http://shop.jhp.es/ Avda. Diagonal 177 planta 5, 08018 Barcelona 902 90 09 86 / 932 74 10 54 soporte@jhp.es / info@jhp.net Jesus Boira Comercial T\u00e8cnica S.L. http://www.boiract.cat/ C/ Mas les Vinyes, 19 Pol\u00edgono industrial Mas les Vinyes, 08570 Torell\u00f3 931 80 01 10 boiract@boiract.cat LASER TOOLS Framun http://www.framuntechno.com/es/ Ctra. de Vic Km. 2,6, 08243 Manresa 0034 938 735 142 framun@framun.com II-VI UK LTD. http://www.ii-vi.es/ 21 Burley Road, Oakham, Rutland, LE15 6DH 0044 1 572 759 027 IR.Ventas.ES@II-VI.com Supraform, S.L. http://www.supraform.net/ Carrer de L\u2019Enginy Nave 14, 08850 Gava, Barcelona 0034 936 631 300 supraform@supraform.net CORK Surotecnia http://www.surotecnia.com/index.html Calle Muntaner, 56, 08011 Barcelona 934 534 711 jlleset@surotecnia.com Juan Barnacork (Aka Manufacturas Paulet) http://www.barnacork.com/index.php Carrer de Llull, 47-49, Planta 4 Local 5 933 097 783 info@barnacork.com Montse PAINT http://www.akzonobel.com/es/ TEXTILES // NETS http://www.redesycuerdas.com/ http://yutes.com/ http://www.iaso.es/ Stocks Textiles https://goo.gl/hVwpMY Carrer de T\u00e0nger, 48, 08018 BarcelonaPhone:617 57 01 79 http://www.ribescasals.com/ http://www.ventilador.com/ www.bove-ag.com C/ ctra de l\u2019arbo\u00e7 km 1,6, 08800 Vilanova i la Geltru, 41\u00ba 13\u2019 44.37 , 1\u00ba 41\u2019 59.83 , 41.228991, 1.6999 tel: 938 148 581 mov. 639 302 393 toni@bove-ag.com https://sensordeniveldecombustivel.blogspot.com/2019/08/herramientas-de-sensor-de-combustible.html LEATHER/ fabrics Curtidos Garc\u00eda http://www.curtidosgarcia.com/index.php Calle Hospital 49, 08001 Barcelona http://brambysupply.com/?lang=es Carrer de Sant Pere M\u00e9s Alt, 36, 08003 Barcelona, Spain Mercat dels Encants http://www.encantsbcn.com/es C. Dos de Maig, 186, 08013, Barcelona, El Clot CURTIS CAT www.curtitscat.com Carrer d\u2019Erasme de Janer, 1, 08001 Barcelona, Espa\u00f1a Tel\u00e9fono:+34 934 42 25 68 SMART MATERIALS http://www.inteligentes.org/ mov. 639 302 393 MAGNETS Supermagnete http://www.supermagnete.es/eng/ First 4 magnets http://www.first4magnets.com/ Aiman GZ http://m.aimangz.es/ La boutique del iman http://www.laboutiquedeliman.com/ FIne magnet wires http://www.elektrisola.com/us/home.html DRUGSTORES Parafarmacia Campoamor http://www.parafarmaciacampoamor.com/es/ Avenida de las Adelfas, 45, 03189 Dehesa de Campoamor, Orihuela Costa, Alicante 965 320 584 maria@parafarmaciacampoamor.com Maria Promofarma http://www.promocionesfarma.com/ Av. Diagonal 534, 6\u00ba 2\u00aa, 08006, Barcelona 902 930 918 clientes@promofarma.com RUBBER BELTS Suministros Blasi, S.L. http://blasisl.com/ C/ Arag\u00f3n 441-445, 08013 Barcelona 932 658 592 blasi@blasisl.com M\u00aa Angeles PCB board fabrication http://www.smallbatchassembly.com/ Pneumatics (+pipe and connectors) Asteva http://astevasl.com Carrer Almog\u00e0vers, 80, 08018 Barcelona 933 00 68 11 Barcelona de Fluidos S. Carrer de Llull, 70, 08005 Barcelona 933 00 38 12 Chemicals Manuel Riesgo http://manuelriesgo.com/ C/ Desenga\u00f1o, 22, 28004 Madrid 91 521 61 34 Quimics Dalmau http://quimicsdalmau.com/ Sigma-Aldrich http://www.sigmaaldrich.com web Mechanical components Misumi www.misumi-europe.com RS http://uk.rs-online.com SDP/SI www.sdp-si.com Cim Foundation C/ Llorens i Artigas 12 93 401 71 71 Taller Jordi Basas Vila Sant Gen\u00eds s/n 08719 Jorba Barcelona 938078044 taller@tallerjordibasas.com Precision/Grinding/Polishing Tools DelValle http://www.delvalle.cat/ c/ Bail\u00e8n 58, 08009 BARCELONA 93 265 83 18 delvalle@delvalle.cat Personal Protective Equipment A T Proteccion S.L. https://www.atproteccion.com/ Carrer d\u2019Ausi\u00e0s Marc, 155, 08013 Barcelona https://www.google.com/maps/d/u/0/viewer?hl=es&mid=1EE84VXpfY3PsD3eLO20NmPvtw8U&ll=41.71168544340683%2C6.279241949999914&z=6","title":"Legacy Suppliers"},{"location":"fabrication/templates/","tags":["templates"],"text":"templates Templates \u00b6 MACHINE TEMPLATE MATERIAL TEMPLATE PROGRAM TEMPLATE","title":"Templates"},{"location":"fabrication/templates/#templates","text":"","title":"Templates"},{"location":"fabrication/templates/machine-template/","tags":["template","fabrication"],"text":"template fabrication Technical specifications \u00b6 Brand: Work area: Materials: Technology: Applications \u00b6 List of applications Health & Safety \u00b6 Maintenance \u00b6 Useful information \u00b6 External resources \u00b6 Suppliers User Manual Info page Guides \u00b6 Troubleshooting \u00b6","title":"Machine template"},{"location":"fabrication/templates/machine-template/#technical-specifications","text":"Brand: Work area: Materials: Technology:","title":"Technical specifications"},{"location":"fabrication/templates/machine-template/#applications","text":"List of applications","title":"Applications"},{"location":"fabrication/templates/machine-template/#health-safety","text":"","title":"Health & Safety"},{"location":"fabrication/templates/machine-template/#maintenance","text":"","title":"Maintenance"},{"location":"fabrication/templates/machine-template/#useful-information","text":"","title":"Useful information"},{"location":"fabrication/templates/machine-template/#external-resources","text":"Suppliers User Manual Info page","title":"External resources"},{"location":"fabrication/templates/machine-template/#guides","text":"","title":"Guides"},{"location":"fabrication/templates/machine-template/#troubleshooting","text":"","title":"Troubleshooting"},{"location":"fabrication/templates/material_template/","tags":["template","fabrication"],"text":"template fabrication Title \u00b6 Content Process \u00b6 Process","title":"Material template"},{"location":"fabrication/templates/material_template/#title","text":"Content","title":"Title"},{"location":"fabrication/templates/material_template/#process","text":"Process","title":"Process"},{"location":"guides/","tags":["guides"],"text":"guides Guides \u00b6 MKDOCS DOCUMENTATION","title":"Guides"},{"location":"guides/#guides","text":"","title":"Guides"},{"location":"guides/documentation/","tags":["guides"],"text":"guides Theme \u00b6 We use the Material theme for MK Docs. You can find the updated features in the theme specimen . We also run most of the available extensions . Example configurations \u00b6 Learn from running projects Here there is a list of projects using mkdocs in different ways for documenting various things: SmartCitizen Docs: https://docs.smartcitizen.me Fabacademy Barcelona Local Docs: https://fablabbcn-projects.gitlab.io/learning/fabacademy-local-docs/ This documentation: https://knowledge.fablabbcn.org Customization \u00b6 You can deeply customize it by simply editing the the mkdocs.yml file the root folder mkdocs.yml . An interesting feature is the possibility to manually customize navigation. See Smart Citizen Docs as an example. Automation \u00b6 We use Github Action to automatically update knowledge.fablabbcn.org every time you commit a change. Currently we run a single workflow to simply build the site like mkdocs build but more complex features are possible. Find an example here .","title":"mkdocs documentation"},{"location":"guides/documentation/#theme","text":"We use the Material theme for MK Docs. You can find the updated features in the theme specimen . We also run most of the available extensions .","title":"Theme"},{"location":"guides/documentation/#example-configurations","text":"Learn from running projects Here there is a list of projects using mkdocs in different ways for documenting various things: SmartCitizen Docs: https://docs.smartcitizen.me Fabacademy Barcelona Local Docs: https://fablabbcn-projects.gitlab.io/learning/fabacademy-local-docs/ This documentation: https://knowledge.fablabbcn.org","title":"Example configurations"},{"location":"guides/documentation/#customization","text":"You can deeply customize it by simply editing the the mkdocs.yml file the root folder mkdocs.yml . An interesting feature is the possibility to manually customize navigation. See Smart Citizen Docs as an example.","title":"Customization"},{"location":"guides/documentation/#automation","text":"We use Github Action to automatically update knowledge.fablabbcn.org every time you commit a change. Currently we run a single workflow to simply build the site like mkdocs build but more complex features are possible. Find an example here .","title":"Automation"},{"location":"programs/","tags":["programs"],"text":"programs Programs \u00b6 This section summarises educational programs and related material in different categories. All content can be reused for other classes. Make sure to follow the templates here and here . MDEF FABACADEMY Fabacademy is... FABRICADEMY","title":"Programs"},{"location":"programs/#programs","text":"This section summarises educational programs and related material in different categories. All content can be reused for other classes. Make sure to follow the templates here and here .","title":"Programs"},{"location":"programs/MDEF/","tags":["programs"],"text":"programs Projects \u00b6 Resources \u00b6 Publications \u00b6 Toolkits \u00b6 Links \u00b6 Useful links Local documentation link . The global site link :laptop: Local projects here","title":"MDEF"},{"location":"programs/MDEF/#projects","text":"","title":"Projects"},{"location":"programs/MDEF/#resources","text":"","title":"Resources"},{"location":"programs/MDEF/#publications","text":"","title":"Publications"},{"location":"programs/MDEF/#toolkits","text":"","title":"Toolkits"},{"location":"programs/MDEF/#links","text":"Useful links Local documentation link . The global site link :laptop: Local projects here","title":"Links"},{"location":"programs/fabacademy/","tags":["programs"],"text":"programs Projects \u00b6 Resources \u00b6 Publications \u00b6 Toolkits \u00b6 Links \u00b6 Useful links Fabacademy local documentation link . The global fabacademy site link :laptop: Local projects here","title":"Fabacademy"},{"location":"programs/fabacademy/#projects","text":"","title":"Projects"},{"location":"programs/fabacademy/#resources","text":"","title":"Resources"},{"location":"programs/fabacademy/#publications","text":"","title":"Publications"},{"location":"programs/fabacademy/#toolkits","text":"","title":"Toolkits"},{"location":"programs/fabacademy/#links","text":"Useful links Fabacademy local documentation link . The global fabacademy site link :laptop: Local projects here","title":"Links"},{"location":"programs/fabricademy/","tags":["programs"],"text":"programs Projects \u00b6 Resources \u00b6 Publications \u00b6 Toolkits \u00b6 Links \u00b6 Useful links Fabricademy local documentation link . The global fabricademy site link :laptop: Local projects here","title":"Fabricademy"},{"location":"programs/fabricademy/#projects","text":"","title":"Projects"},{"location":"programs/fabricademy/#resources","text":"","title":"Resources"},{"location":"programs/fabricademy/#publications","text":"","title":"Publications"},{"location":"programs/fabricademy/#toolkits","text":"","title":"Toolkits"},{"location":"programs/fabricademy/#links","text":"Useful links Fabricademy local documentation link . The global fabricademy site link :laptop: Local projects here","title":"Links"},{"location":"programs/templates/program_template/","tags":["education","template"],"text":"education template Projects \u00b6 Resources \u00b6 Publications \u00b6 Toolkits \u00b6 Links \u00b6 Useful links Local documentation link . The global site link :laptop: Local projects here","title":"Program template"},{"location":"programs/templates/program_template/#projects","text":"","title":"Projects"},{"location":"programs/templates/program_template/#resources","text":"","title":"Resources"},{"location":"programs/templates/program_template/#publications","text":"","title":"Publications"},{"location":"programs/templates/program_template/#toolkits","text":"","title":"Toolkits"},{"location":"programs/templates/program_template/#links","text":"Useful links Local documentation link . The global site link :laptop: Local projects here","title":"Links"},{"location":"research/","text":"Project Index \u00b6 Available resources","title":"Project Index"},{"location":"research/#project-index","text":"Available resources","title":"Project Index"},{"location":"research/project%20contributions/popmachina/","tags":["eu project"],"text":"eu project Project description \u00b6 The EU-funded POP-MACHINA aims to promote a more circular production paradigm, engaging communities, and promoting urban and community development achieved through collaborative production in cities. The project will create a network of existing and new communities in urban areas and use cutting-edge technologies (factory-of-the-future, blockchain) to engage urban planning, boost social dialogue, recognise local needs in training and skills development. The partners will share open source practices and develop a framework for implementing circular collaborative production in urban areas. Info Link to project website link . Info Link to Fab Lab Barcelona website link . Contributions generated by/with Fab Lab Barcelona \u00b6 Publications \u00b6 Programmes \u00b6 Toolkits \u00b6 Links \u00b6 Interesting contributions from project partners \u00b6","title":"Pop-Machina"},{"location":"research/project%20contributions/popmachina/#project-description","text":"The EU-funded POP-MACHINA aims to promote a more circular production paradigm, engaging communities, and promoting urban and community development achieved through collaborative production in cities. The project will create a network of existing and new communities in urban areas and use cutting-edge technologies (factory-of-the-future, blockchain) to engage urban planning, boost social dialogue, recognise local needs in training and skills development. The partners will share open source practices and develop a framework for implementing circular collaborative production in urban areas. Info Link to project website link . Info Link to Fab Lab Barcelona website link .","title":"Project description"},{"location":"research/project%20contributions/popmachina/#contributions-generated-bywith-fab-lab-barcelona","text":"","title":"Contributions generated by/with Fab Lab Barcelona"},{"location":"research/project%20contributions/popmachina/#publications","text":"","title":"Publications"},{"location":"research/project%20contributions/popmachina/#programmes","text":"","title":"Programmes"},{"location":"research/project%20contributions/popmachina/#toolkits","text":"","title":"Toolkits"},{"location":"research/project%20contributions/popmachina/#links","text":"","title":"Links"},{"location":"research/project%20contributions/popmachina/#interesting-contributions-from-project-partners","text":"","title":"Interesting contributions from project partners"},{"location":"research/publications/","text":"Publications \u00b6","title":"Publications"},{"location":"research/publications/#publications","text":"","title":"Publications"},{"location":"research/publications/Books/","text":"Books \u00b6 S. Bourdon, J. Guy, S. Bosch, G. Camprodon, M. Reyes (ed.) (2023). Driving Design: Collective approaches Driving enriching design principles. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-120886-2-5) Download PDF A. Deserti, M. Real, F. Schmittinger.(ed.) (2022). Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools. Springer Nature. (ISBN: 978-3-030-78732-5) Download PDF K. Armstrong, T. Diez, P. Sanchez Toribio, M. Rodriguez, M. Reyes (ed.) (2021). This is Distributed Design: Making a new local & global design paradigm. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-617-2454-3) Download PDF K. Armstrong, P. Sanchez Toribio, E. Whyman, T. Diez. (ed.) (2020). Viral Design: The COVID-19 Crisis as a Global Test Bed for Distributed Design. Barcelona, Spain: Fab Lab Barcelona,Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-120886-0-1) Download PDF Armstrong, K. & Diez, T. (ed.) (2019). Design remix share repeat: how distributed design is changing the way makers and designers approach collaboration, tools and the market. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-948142-3-5) Download PDF Diez Ladera, T., Gershenfeld, N., Steels, L., Filippi, P., Balestrini, M., Seiz, G., Corbin, E., Tooze, J., Lassiter, S., Ermacora, T., Li, D., & Hilgefort, J. (2018). Fab City: The Mass Distribution of (Almost) Everything. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-948142-1-1) Download PDF Menichinelli, M & Molina, M. (2018). Understanding Collective Awareness Platforms with the Maker Movement. Results, reflections and future strategies from the Horizon 2020 MAKE-IT project. (ISBN: 978-84-948142-0-4) Download PDF Woods, M., Balestrini, M., Bejtullahu, S., Bocconi, S., Boerwinkel, G., Boonstra, M., Boschman, D-S., Camprodon, G., Coulson, S., Diez, T., Fazey, I., Hemment, D., van den Horn, C., Ilazi, T., Jansen-Dings, I., Kresin, F., McQuillan, D., Nascimento, S., Pareschi, E., \u2026 Seiz, G. (2018). Citizen Sensing: A Toolkit. Making Sense. (ISBN: 978-90-828215-0-5) Download PDF","title":"Books"},{"location":"research/publications/Books/#books","text":"S. Bourdon, J. Guy, S. Bosch, G. Camprodon, M. Reyes (ed.) (2023). Driving Design: Collective approaches Driving enriching design principles. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-120886-2-5) Download PDF A. Deserti, M. Real, F. Schmittinger.(ed.) (2022). Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools. Springer Nature. (ISBN: 978-3-030-78732-5) Download PDF K. Armstrong, T. Diez, P. Sanchez Toribio, M. Rodriguez, M. Reyes (ed.) (2021). This is Distributed Design: Making a new local & global design paradigm. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-617-2454-3) Download PDF K. Armstrong, P. Sanchez Toribio, E. Whyman, T. Diez. (ed.) (2020). Viral Design: The COVID-19 Crisis as a Global Test Bed for Distributed Design. Barcelona, Spain: Fab Lab Barcelona,Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-120886-0-1) Download PDF Armstrong, K. & Diez, T. (ed.) (2019). Design remix share repeat: how distributed design is changing the way makers and designers approach collaboration, tools and the market. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-948142-3-5) Download PDF Diez Ladera, T., Gershenfeld, N., Steels, L., Filippi, P., Balestrini, M., Seiz, G., Corbin, E., Tooze, J., Lassiter, S., Ermacora, T., Li, D., & Hilgefort, J. (2018). Fab City: The Mass Distribution of (Almost) Everything. Barcelona, Spain: Fab Lab Barcelona, Institute for Advanced Architecture of Catalonia (IAAC). (ISBN: 978-84-948142-1-1) Download PDF Menichinelli, M & Molina, M. (2018). Understanding Collective Awareness Platforms with the Maker Movement. Results, reflections and future strategies from the Horizon 2020 MAKE-IT project. (ISBN: 978-84-948142-0-4) Download PDF Woods, M., Balestrini, M., Bejtullahu, S., Bocconi, S., Boerwinkel, G., Boonstra, M., Boschman, D-S., Camprodon, G., Coulson, S., Diez, T., Fazey, I., Hemment, D., van den Horn, C., Ilazi, T., Jansen-Dings, I., Kresin, F., McQuillan, D., Nascimento, S., Pareschi, E., \u2026 Seiz, G. (2018). Citizen Sensing: A Toolkit. Making Sense. (ISBN: 978-90-828215-0-5) Download PDF","title":"Books"},{"location":"research/publications/Journals%20and%20Papers/","text":"Papers and Posters \u00b6 2024 \u00b6 Panneels, I., Lechelt, S., Schmidt, A., & Co\u015fkun, A. (2024). Data-driven innovation for sustainable practice in the creative economy. https://doi.org/10.4324/9781003365891-11 2023 \ud83d\udea7 \u00b6 Nadal, O. and Dom\u00ednguez,X. (2023). Integration of the maker movement in the classroom: a practical experience in the first year of an educational project. UTE Teaching & Technology (Universitas Tarraconensis), (1), e3566. https://doi.org/10.17345/ute.2023.3566 Mashhoodi, B., & Mu\u00f1oz-Unceta, P. (2023). Regional allocation of EV chargers\u2019 grid load. Annals of GIS, 0(0), 1\u201315. https://doi.org/10.1080/19475683.2023.2166111 2022 \ud83d\udea7 \u00b6 Solanas, O., Usart, M., Valls, C., Dom\u00ednguez, X. (2022). Metodolog\u00eda STEAM-Maker en primaria: un estudio mixto. Publicado en el libro de actas \u201cEducaci\u00f3n transformadora en un mundo digital: Conectando paisajes de aprendizaje\u201d (pg 272-274) del XXV Congreso Internacional Edutec 2022. https://edutec2022.uib.es/libro-de-actas/ Gerodimou, M.D., Chamorro-Martin, E., & Fuentemilla, S. (2022). Developing maker-centred learning programs to promote critical thinking about technology and design for emergent futures. Proceedings of the Fab 17 Research Papers Stream, 145\u2013159. https://doi.org/10.5281/zenodo.7432107 Ferro, C., Mu\u00f1oz Unceta, P., Fontana Valenti, C., Jusic, I., Cingolani, F., Diez Ladera, T., & Parikh, M. (2022). Fab City Hubs: Interfaces for community building and playgrounds for new innovative urban actions. Proceedings of the Fab 17 Research Papers Stream, 19\u201334. https://doi.org/10.5281/zenodo.7432052 Gerodimou, M.D., Chamorro, E., & Fuentemilla, S. (2022). Developing maker-centred learning programs to promote critical thinking about technology and design for emergent futures. Proceedings of the Fab 17 Research Papers Stream, 145\u2013159. https://doi.org/10.5281/zenodo.7432107 Burdiles Araneda, I. M., Dominguez, X., Real, M., Fuentemilla, S., & Pistofidou, A. (2022, May). Remix The School Project: Socio-Emotional Learning through Biomaterial making: A Methodology for Self-Awareness through Bio-material fabrication for teachers and children. In 6 th FabLearn Europe/MakeEd Conference 2022 (pp. 1-5). https://doi.org/10.1145/3535227.3535242 Bilgin, A. S., Molina Ascanio, M., Milanovic, I., Kirsch, M., Beernaert, Y., Sotiriou, S., Gregori Montaner, A., Cornakov, S., Velner, G., Axisa, J. , Wellens, T., Muscat, M., Vaidelis, G., Messaritou, M., Go\u017adzik, A., Castilla Mora, L., Ivanova, I., Dariou, E., Yuste, A., Preda, E., Quarta, B., B. Dom\u00ednguez, X., Kesting, F., Katikas, L., Mitic-Radulovic, A., Gras-Velazquez, A. (2022), STEM in the future: Transforming education for sustainability, Scientix Observatory, October 2022. http://files.eun.org/scientix/Bilgin_et_al_2022_STEM_in_the_Future_Final-to-publish-2.pdf Munoz-Unceta, P., Mashhoodi, B. (2022). Mobility, electricity, and parking data for EV infrastructure in the Amsterdam Metropolitan Area, Data in Brief, Volume 42, 2022, 108270, ISSN 2352-3409, https://doi.org/10.1016/j.dib.2022.108270 Furlan, C., Wandl, A., Cavalieri, C., Munoz-Unceta, P. (2022). Territorialising Circularity. In: Amenta, L., Russo, M., van Timmeren, A. (eds) Regenerative Territories. GeoJournal Library, vol 128. Springer, Cham. https://doi.org/10.1007/978-3-030-78536-9_2 Cabrera Galinzed, A., Pistofidou, A. (2022) From Textiles to Soft Robotics and the Emergent Approaches in STEAM and Textile Labs. In: Conference Proceedings. The Future of Education 2022. https://conference.pixel-online.net/FOE/files/foe/ed0012/FP/7865-ADU5593-FP-FOE12.pdf Munoz-Unceta, P., Lambert S., Pazaitis A. (2022) A citizen-oriented and circular-fabrication approach to productive cities and local resilience. The Fab City framework applied in the industrial historic centres of Barcelona, Milan and Tallinn, Urban Transitions Conference, 2022, Barcelona. https://www.researchgate.net/publication/365409209_How_can_citizen-oriented_local_actio [\u2026]native_more_resilient_sustainable_and_inclusive_city_model Earley, R., Hornbuckle R., Real, M, Hall, K. (2022) Designing the Circular Design Team, DRS Workshop 2022. https://ualresearchonline.arts.ac.uk/id/eprint/18614/ https://ualresearchonline.arts.ac.uk/id/eprint/18614/2/DRS2022-Workshop-CCD_Proposal%20V2.pdf Real, M., Pierite, JL., Quintero, M. (2022) Designing Reservist Cells in time of crisis, DRS Workshop 2022. Real, M., Pistofidou, A., Juarez-Calvos, M. (2022) FabLab Barcelona\u2014Co-design With Food Surplus: Better Redistributing, Upcycling and Composting. Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools, 2022, 37-46. https://link.springer.com/chapter/10.1007/978-3-030-78733-2_4 Real, M, Schmittinger, F. (2022) A Framework for Experimenting Co-creation in Real-Life Contexts. Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools, 2022, 11-24. https://link.springer.com/chapter/10.1007/978-3-030-78733-2_2 Wei, Y., Markopoulou, A., Zhu, Y., Chamorro-Martin, E., Kirova, N. (2022). Additive Manufacture of Cellulose Based Bio-Material on Architectural Scale. In: Yuan, P.F., Chai, H., Yan, C., Leach, N. (eds) Proceedings of the 2021 DigitalFUTURES. CDRF 2021. Springer, Singapore. https://doi.org/10.1007/978-981-16-5983-6_27 2021 \u00b6 Cabrera, A., Pistofidou, A., Real, M., Sykes, S., Czeschik, A., & Marsh, J. (2021). Innovation Ecosystem for women makers through textiles labs and the shemakes. eu approach. In Proceedings of the Fab 16 Research Papers Stream (pp. 221-239). https://doi.org/10.5281/zenodo.5169851 Maccani, G., Errandonea, L., Righi, V., Camprodon, G., & Galli, J. (2021). VenicAIRE. Quaderns d\u2019arquitectura i urbanisme, (Biennale), 74-81. https://raco.cat/index.php/QuadernsArquitecturaUrbanisme/article/view/392968 Sedini, C., Rasmussen, A. N., Marion, R., & Cipriani, L. (2021). Co-creating social and sustainable innovation in Makerspaces and Fab Labs. Lessons learnt from the SISCODE European project. In Proceedings of the Fab 16 Research Papers Stream (pp. 141-153). https://hdl.handle.net/11311/1206081 Chamorro-Martin, E., Chadha, K. (2021) Hyper-connected hybrid educational models for distributed learning through prototyping, Jornadas sobre Innovaci\u00f3n Docente en Arquitectura. Available at: https://upcommons.upc.edu/handle/2117/356107 2020 \u00b6 Pistofidou, A., Real, M., & Juarez Calvo, M. (2020). Remix El Barrio: A Co-Creation Journey to Foster Innovative Ecosystems Crafting and Micro-Fabricating with Food Surplus and Waste. Creative Food Cycles-Book 1, 185-195. https://www.repo.uni-hannover.de/handle/123456789/10176 Sollazzo, A., Colliaux, D., Garivani, S., Minchin, J., Garlanda, L., & Hanappe, P. (2020). Automated vegetable growth analysis from outdoor images acquired with a cablebot. In Proceedings of the IEEE International Conference on Computer Vision Workshops. https://www.plant-phenotyping.org/lw_resource/datapool/systemfiles/elements/files/cb52dc44-eb90-11ea-908c-dead53a91d31/current/document/W0008.pdf Armstrong, K., Whaman, E., Schafer, L., Bugge Henriksen, C., & Wascher, D. (2020). Foodshift 2030: A Citizen-Driven Transition of the European Food System (EU Horizon Project). Creative Food Cycles-Book 1, 313-321. https://www.repo.uni-hannover.de/handle/123456789/10187 Menichinelli, M., & Schmidt, A. G. S. (2020). First exploratory geographical and social maps of the maker movement. European Journal of Creative Practices in Cities and Landscapes, 2(2), 35-62. https://cpcl.unibo.it/article/view/9640 Diez, T., Tomico, O., & Quintero, M. (2020). Exploring Weak Signals to Design and Prototype for Emergent Futures. Temes de Disseny, (36), 70-89. https://www.raco.cat/index.php/Temes/article/view/373819 Munoz-Unceta, P., Hausleitner, B., & D\u0105browski, M. (2020). Socio-spatial segregation and the spatial structure of \u2018ordinary\u2019activities in the Global South. Urban Planning, 5(3), 303-318. https://www.cogitatiopress.com/urbanplanning/article/view/3047 Mahajan, S., Kumar, P., Camprodon, G., \u2026 & Forino, G. (2020). A citizen science approach for enhancing public understanding of air pollution. Sustainable Cities and Society, 52, 101800. https://www.sciencedirect.com/science/article/abs/pii/S2210670719317020 Kuula, J., M\u00e4kel\u00e4, T., Aurela, M., Teinil\u00e4, K., Varjonen, S., Gonz\u00e1lez, \u00d3., & Timonen, H. (2020). Laboratory evaluation of particle-size selectivity of optical low-cost particulate matter sensors. Atmospheric Measurement Techniques, 13(5), 2413-2423. https://amt.copernicus.org/articles/13/2413/2020/ Real, M., Lizarralde, I., & Tyl, B. (2020). Exploring Local Business Model Development for Regional Circular Textile Transition in France. Fashion Practice, 12(1), 6-33. https://www.tandfonline.com/doi/abs/10.1080/17569370.2020.1716546 Menichinelli, M., Velis, E., Rocha, A., & Schmidt, A. (2021). Collaborative ontology design for Open Hardware and Open Design. In Design Culture (s). Cumulus Conference Proceedings Roma 2021, Volume# 2 (pp. 1535-1550). Cumulus, Aalto University. https://researchrepository.rmit.edu.au/esploro/outputs/9922026566301341 Armstrong, K. (2020). Distributed Design: A Platform Approach Towards More Inclusive, Plural Futures for Design. Making Futures Journal Volume VI. ISSN 2042-1664 https://makingfutures.pca.ac.uk/journal/kate-armstrong Minchin, J. (2020). ROMI: Robotics for Microfarming. Open Access Government https://www.openaccessgovernment.org/romi-robotics-for-microfarming/80533/ 2019 \u00b6 Camprodon, G., Gonz\u00e1lez, \u00d3., Barber\u00e1n, V., P\u00e9rez, M., Sm\u00e1ri, V., de Heras, M. \u00c1., & Bizzotto, A. (2019). Smart Citizen Kit and Station: An open environmental monitoring system for citizen participation and scientific experimentation. HardwareX, 6, e00070. https://doi.org/10.1016/j.ohx.2019.e00070 Real, M., & Calvo, M. (2019, October). Boosting co-creation practices in makespaces to support the design of more empowering and circular food systems at a neighbourhood scale. In ERSCP 2019 (Vol. 1, pp. p-831). https://hal.archives-ouvertes.fr/hal-02387713/ 2018 \u00b6 Woods, M., Balestrini, M., Bejtullahu, S., Bocconi, S., Boerwinkel, G., Boonstra, M., Camprodon, G., Diez, T., \u2026 & Seiz, G. (2018). Citizen sensing: a toolkit. https://eprints.whiterose.ac.uk/148521/ Diez, T. (2018). Fab city: the mass distribution of (almost) everything. IAAC: Barcelona, Spain. 2017 \u00b6 Balestrini, M., Seiz, G., Pe\u00f1a, L. L., & Camprodon, G. (2017). Onboarding communities to the IoT. In Internet Science: 4 th International Conference, INSCI 2017, Thessaloniki, Greece, November 22-24, 2017, Proceedings 4 (pp. 19-27). Springer International Publishing. https://link.springer.com/chapter/10.1007/978-3-319-70284-1_2 2016 \u00b6 Guti\u00e9rrez, V., Theodoridis, E., Mylonas, G., Shi, F., Adeel, U., Diez, L., Camprodon, G., \u2026 & Mu\u00f1oz, L. (2016). Co-creating the cities of the future. Sensors, 16(11), 1971. https://doi.org/10.3390/s16111971 Hemment, D., Woods, M., Skalsky, R., Buontempo, C., Neilson, R., Khawaja, M., Georgiadis, P., Caon, L., Xaver, A., van der Velden, N., Cobley, A., Taylor, N., Georgiou, S., Mollfulleda, A., Knippers, T., Bouvard, J., Rowan, J., Diez, T., Dobos, E., \u2026 Poynton, S. (2016). Collective Intelligence and Participatory Citizen Science for Growing for Food and Sustainable Land Use. Paper presented at European Citizen Science Association Conference 2016, Berlin, Germany. https://discovery.dundee.ac.uk/en/publications/collective-intelligence-and-participatory-citizen-science-for-gro","title":"Papers and Posters"},{"location":"research/publications/Journals%20and%20Papers/#papers-and-posters","text":"","title":"Papers and Posters"},{"location":"research/publications/Journals%20and%20Papers/#2024","text":"Panneels, I., Lechelt, S., Schmidt, A., & Co\u015fkun, A. (2024). Data-driven innovation for sustainable practice in the creative economy. https://doi.org/10.4324/9781003365891-11","title":"2024"},{"location":"research/publications/Journals%20and%20Papers/#2023","text":"Nadal, O. and Dom\u00ednguez,X. (2023). Integration of the maker movement in the classroom: a practical experience in the first year of an educational project. UTE Teaching & Technology (Universitas Tarraconensis), (1), e3566. https://doi.org/10.17345/ute.2023.3566 Mashhoodi, B., & Mu\u00f1oz-Unceta, P. (2023). Regional allocation of EV chargers\u2019 grid load. Annals of GIS, 0(0), 1\u201315. https://doi.org/10.1080/19475683.2023.2166111","title":"2023 \ud83d\udea7"},{"location":"research/publications/Journals%20and%20Papers/#2022","text":"Solanas, O., Usart, M., Valls, C., Dom\u00ednguez, X. (2022). Metodolog\u00eda STEAM-Maker en primaria: un estudio mixto. Publicado en el libro de actas \u201cEducaci\u00f3n transformadora en un mundo digital: Conectando paisajes de aprendizaje\u201d (pg 272-274) del XXV Congreso Internacional Edutec 2022. https://edutec2022.uib.es/libro-de-actas/ Gerodimou, M.D., Chamorro-Martin, E., & Fuentemilla, S. (2022). Developing maker-centred learning programs to promote critical thinking about technology and design for emergent futures. Proceedings of the Fab 17 Research Papers Stream, 145\u2013159. https://doi.org/10.5281/zenodo.7432107 Ferro, C., Mu\u00f1oz Unceta, P., Fontana Valenti, C., Jusic, I., Cingolani, F., Diez Ladera, T., & Parikh, M. (2022). Fab City Hubs: Interfaces for community building and playgrounds for new innovative urban actions. Proceedings of the Fab 17 Research Papers Stream, 19\u201334. https://doi.org/10.5281/zenodo.7432052 Gerodimou, M.D., Chamorro, E., & Fuentemilla, S. (2022). Developing maker-centred learning programs to promote critical thinking about technology and design for emergent futures. Proceedings of the Fab 17 Research Papers Stream, 145\u2013159. https://doi.org/10.5281/zenodo.7432107 Burdiles Araneda, I. M., Dominguez, X., Real, M., Fuentemilla, S., & Pistofidou, A. (2022, May). Remix The School Project: Socio-Emotional Learning through Biomaterial making: A Methodology for Self-Awareness through Bio-material fabrication for teachers and children. In 6 th FabLearn Europe/MakeEd Conference 2022 (pp. 1-5). https://doi.org/10.1145/3535227.3535242 Bilgin, A. S., Molina Ascanio, M., Milanovic, I., Kirsch, M., Beernaert, Y., Sotiriou, S., Gregori Montaner, A., Cornakov, S., Velner, G., Axisa, J. , Wellens, T., Muscat, M., Vaidelis, G., Messaritou, M., Go\u017adzik, A., Castilla Mora, L., Ivanova, I., Dariou, E., Yuste, A., Preda, E., Quarta, B., B. Dom\u00ednguez, X., Kesting, F., Katikas, L., Mitic-Radulovic, A., Gras-Velazquez, A. (2022), STEM in the future: Transforming education for sustainability, Scientix Observatory, October 2022. http://files.eun.org/scientix/Bilgin_et_al_2022_STEM_in_the_Future_Final-to-publish-2.pdf Munoz-Unceta, P., Mashhoodi, B. (2022). Mobility, electricity, and parking data for EV infrastructure in the Amsterdam Metropolitan Area, Data in Brief, Volume 42, 2022, 108270, ISSN 2352-3409, https://doi.org/10.1016/j.dib.2022.108270 Furlan, C., Wandl, A., Cavalieri, C., Munoz-Unceta, P. (2022). Territorialising Circularity. In: Amenta, L., Russo, M., van Timmeren, A. (eds) Regenerative Territories. GeoJournal Library, vol 128. Springer, Cham. https://doi.org/10.1007/978-3-030-78536-9_2 Cabrera Galinzed, A., Pistofidou, A. (2022) From Textiles to Soft Robotics and the Emergent Approaches in STEAM and Textile Labs. In: Conference Proceedings. The Future of Education 2022. https://conference.pixel-online.net/FOE/files/foe/ed0012/FP/7865-ADU5593-FP-FOE12.pdf Munoz-Unceta, P., Lambert S., Pazaitis A. (2022) A citizen-oriented and circular-fabrication approach to productive cities and local resilience. The Fab City framework applied in the industrial historic centres of Barcelona, Milan and Tallinn, Urban Transitions Conference, 2022, Barcelona. https://www.researchgate.net/publication/365409209_How_can_citizen-oriented_local_actio [\u2026]native_more_resilient_sustainable_and_inclusive_city_model Earley, R., Hornbuckle R., Real, M, Hall, K. (2022) Designing the Circular Design Team, DRS Workshop 2022. https://ualresearchonline.arts.ac.uk/id/eprint/18614/ https://ualresearchonline.arts.ac.uk/id/eprint/18614/2/DRS2022-Workshop-CCD_Proposal%20V2.pdf Real, M., Pierite, JL., Quintero, M. (2022) Designing Reservist Cells in time of crisis, DRS Workshop 2022. Real, M., Pistofidou, A., Juarez-Calvos, M. (2022) FabLab Barcelona\u2014Co-design With Food Surplus: Better Redistributing, Upcycling and Composting. Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools, 2022, 37-46. https://link.springer.com/chapter/10.1007/978-3-030-78733-2_4 Real, M, Schmittinger, F. (2022) A Framework for Experimenting Co-creation in Real-Life Contexts. Co-creation for Responsible Research and Innovation: Experimenting with Design Methods and Tools, 2022, 11-24. https://link.springer.com/chapter/10.1007/978-3-030-78733-2_2 Wei, Y., Markopoulou, A., Zhu, Y., Chamorro-Martin, E., Kirova, N. (2022). Additive Manufacture of Cellulose Based Bio-Material on Architectural Scale. In: Yuan, P.F., Chai, H., Yan, C., Leach, N. (eds) Proceedings of the 2021 DigitalFUTURES. CDRF 2021. Springer, Singapore. https://doi.org/10.1007/978-981-16-5983-6_27","title":"2022 \ud83d\udea7"},{"location":"research/publications/Journals%20and%20Papers/#2021","text":"Cabrera, A., Pistofidou, A., Real, M., Sykes, S., Czeschik, A., & Marsh, J. (2021). Innovation Ecosystem for women makers through textiles labs and the shemakes. eu approach. In Proceedings of the Fab 16 Research Papers Stream (pp. 221-239). https://doi.org/10.5281/zenodo.5169851 Maccani, G., Errandonea, L., Righi, V., Camprodon, G., & Galli, J. (2021). VenicAIRE. Quaderns d\u2019arquitectura i urbanisme, (Biennale), 74-81. https://raco.cat/index.php/QuadernsArquitecturaUrbanisme/article/view/392968 Sedini, C., Rasmussen, A. N., Marion, R., & Cipriani, L. (2021). Co-creating social and sustainable innovation in Makerspaces and Fab Labs. Lessons learnt from the SISCODE European project. In Proceedings of the Fab 16 Research Papers Stream (pp. 141-153). https://hdl.handle.net/11311/1206081 Chamorro-Martin, E., Chadha, K. (2021) Hyper-connected hybrid educational models for distributed learning through prototyping, Jornadas sobre Innovaci\u00f3n Docente en Arquitectura. Available at: https://upcommons.upc.edu/handle/2117/356107","title":"2021"},{"location":"research/publications/Journals%20and%20Papers/#2020","text":"Pistofidou, A., Real, M., & Juarez Calvo, M. (2020). Remix El Barrio: A Co-Creation Journey to Foster Innovative Ecosystems Crafting and Micro-Fabricating with Food Surplus and Waste. Creative Food Cycles-Book 1, 185-195. https://www.repo.uni-hannover.de/handle/123456789/10176 Sollazzo, A., Colliaux, D., Garivani, S., Minchin, J., Garlanda, L., & Hanappe, P. (2020). Automated vegetable growth analysis from outdoor images acquired with a cablebot. In Proceedings of the IEEE International Conference on Computer Vision Workshops. https://www.plant-phenotyping.org/lw_resource/datapool/systemfiles/elements/files/cb52dc44-eb90-11ea-908c-dead53a91d31/current/document/W0008.pdf Armstrong, K., Whaman, E., Schafer, L., Bugge Henriksen, C., & Wascher, D. (2020). Foodshift 2030: A Citizen-Driven Transition of the European Food System (EU Horizon Project). Creative Food Cycles-Book 1, 313-321. https://www.repo.uni-hannover.de/handle/123456789/10187 Menichinelli, M., & Schmidt, A. G. S. (2020). First exploratory geographical and social maps of the maker movement. European Journal of Creative Practices in Cities and Landscapes, 2(2), 35-62. https://cpcl.unibo.it/article/view/9640 Diez, T., Tomico, O., & Quintero, M. (2020). Exploring Weak Signals to Design and Prototype for Emergent Futures. Temes de Disseny, (36), 70-89. https://www.raco.cat/index.php/Temes/article/view/373819 Munoz-Unceta, P., Hausleitner, B., & D\u0105browski, M. (2020). Socio-spatial segregation and the spatial structure of \u2018ordinary\u2019activities in the Global South. Urban Planning, 5(3), 303-318. https://www.cogitatiopress.com/urbanplanning/article/view/3047 Mahajan, S., Kumar, P., Camprodon, G., \u2026 & Forino, G. (2020). A citizen science approach for enhancing public understanding of air pollution. Sustainable Cities and Society, 52, 101800. https://www.sciencedirect.com/science/article/abs/pii/S2210670719317020 Kuula, J., M\u00e4kel\u00e4, T., Aurela, M., Teinil\u00e4, K., Varjonen, S., Gonz\u00e1lez, \u00d3., & Timonen, H. (2020). Laboratory evaluation of particle-size selectivity of optical low-cost particulate matter sensors. Atmospheric Measurement Techniques, 13(5), 2413-2423. https://amt.copernicus.org/articles/13/2413/2020/ Real, M., Lizarralde, I., & Tyl, B. (2020). Exploring Local Business Model Development for Regional Circular Textile Transition in France. Fashion Practice, 12(1), 6-33. https://www.tandfonline.com/doi/abs/10.1080/17569370.2020.1716546 Menichinelli, M., Velis, E., Rocha, A., & Schmidt, A. (2021). Collaborative ontology design for Open Hardware and Open Design. In Design Culture (s). Cumulus Conference Proceedings Roma 2021, Volume# 2 (pp. 1535-1550). Cumulus, Aalto University. https://researchrepository.rmit.edu.au/esploro/outputs/9922026566301341 Armstrong, K. (2020). Distributed Design: A Platform Approach Towards More Inclusive, Plural Futures for Design. Making Futures Journal Volume VI. ISSN 2042-1664 https://makingfutures.pca.ac.uk/journal/kate-armstrong Minchin, J. (2020). ROMI: Robotics for Microfarming. Open Access Government https://www.openaccessgovernment.org/romi-robotics-for-microfarming/80533/","title":"2020"},{"location":"research/publications/Journals%20and%20Papers/#2019","text":"Camprodon, G., Gonz\u00e1lez, \u00d3., Barber\u00e1n, V., P\u00e9rez, M., Sm\u00e1ri, V., de Heras, M. \u00c1., & Bizzotto, A. (2019). Smart Citizen Kit and Station: An open environmental monitoring system for citizen participation and scientific experimentation. HardwareX, 6, e00070. https://doi.org/10.1016/j.ohx.2019.e00070 Real, M., & Calvo, M. (2019, October). Boosting co-creation practices in makespaces to support the design of more empowering and circular food systems at a neighbourhood scale. In ERSCP 2019 (Vol. 1, pp. p-831). https://hal.archives-ouvertes.fr/hal-02387713/","title":"2019"},{"location":"research/publications/Journals%20and%20Papers/#2018","text":"Woods, M., Balestrini, M., Bejtullahu, S., Bocconi, S., Boerwinkel, G., Boonstra, M., Camprodon, G., Diez, T., \u2026 & Seiz, G. (2018). Citizen sensing: a toolkit. https://eprints.whiterose.ac.uk/148521/ Diez, T. (2018). Fab city: the mass distribution of (almost) everything. IAAC: Barcelona, Spain.","title":"2018"},{"location":"research/publications/Journals%20and%20Papers/#2017","text":"Balestrini, M., Seiz, G., Pe\u00f1a, L. L., & Camprodon, G. (2017). Onboarding communities to the IoT. In Internet Science: 4 th International Conference, INSCI 2017, Thessaloniki, Greece, November 22-24, 2017, Proceedings 4 (pp. 19-27). Springer International Publishing. https://link.springer.com/chapter/10.1007/978-3-319-70284-1_2","title":"2017"},{"location":"research/publications/Journals%20and%20Papers/#2016","text":"Guti\u00e9rrez, V., Theodoridis, E., Mylonas, G., Shi, F., Adeel, U., Diez, L., Camprodon, G., \u2026 & Mu\u00f1oz, L. (2016). Co-creating the cities of the future. Sensors, 16(11), 1971. https://doi.org/10.3390/s16111971 Hemment, D., Woods, M., Skalsky, R., Buontempo, C., Neilson, R., Khawaja, M., Georgiadis, P., Caon, L., Xaver, A., van der Velden, N., Cobley, A., Taylor, N., Georgiou, S., Mollfulleda, A., Knippers, T., Bouvard, J., Rowan, J., Diez, T., Dobos, E., \u2026 Poynton, S. (2016). Collective Intelligence and Participatory Citizen Science for Growing for Food and Sustainable Land Use. Paper presented at European Citizen Science Association Conference 2016, Berlin, Germany. https://discovery.dundee.ac.uk/en/publications/collective-intelligence-and-participatory-citizen-science-for-gro","title":"2016"},{"location":"tags.html","text":"Contents grouped by tag \u00b6 education \u00b6 Program template eu project \u00b6 Pop-Machina experimental \u00b6 Precious Plastic Sheetpress Precious Plastic Shredder fabrication \u00b6 Fabrication resources Machines Precious Plastic Sheetpress Precious Plastic Shredder Prusa MK3 Dibond Machine template Material template guides \u00b6 Guides mkdocs documentation machines \u00b6 Machines Precious Plastic Sheetpress Precious Plastic Shredder Prusa MK3 material processing \u00b6 Precious Plastic Shredder materials \u00b6 Materials Dibond programs \u00b6 Programs MDEF Fabacademy Fabricademy template \u00b6 Machine template Material template Program template templates \u00b6 Templates","title":"Tags"},{"location":"tags.html#contents-grouped-by-tag","text":"","title":"Contents grouped by tag"},{"location":"tags.html#education","text":"Program template","title":"education"},{"location":"tags.html#eu-project","text":"Pop-Machina","title":"eu project"},{"location":"tags.html#experimental","text":"Precious Plastic Sheetpress Precious Plastic Shredder","title":"experimental"},{"location":"tags.html#fabrication","text":"Fabrication resources Machines Precious Plastic Sheetpress Precious Plastic Shredder Prusa MK3 Dibond Machine template Material template","title":"fabrication"},{"location":"tags.html#guides","text":"Guides mkdocs documentation","title":"guides"},{"location":"tags.html#machines","text":"Machines Precious Plastic Sheetpress Precious Plastic Shredder Prusa MK3","title":"machines"},{"location":"tags.html#material-processing","text":"Precious Plastic Shredder","title":"material processing"},{"location":"tags.html#materials","text":"Materials Dibond","title":"materials"},{"location":"tags.html#programs","text":"Programs MDEF Fabacademy Fabricademy","title":"programs"},{"location":"tags.html#template","text":"Machine template Material template Program template","title":"template"},{"location":"tags.html#templates","text":"Templates","title":"templates"}]} \ No newline at end of file diff --git a/sitemap.xml b/sitemap.xml index 42f3889..6e13738 100644 --- a/sitemap.xml +++ b/sitemap.xml @@ -2,127 +2,127 @@ https://knowledge.fablabbcn.org/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/machines/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/machines/precious_plastic_sheet_press/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/machines/precious_plastic_shredder/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/machines/prusamk3/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/materials/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/materials/dibond/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/suppliers/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/templates/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/templates/machine-template/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/fabrication/templates/material_template/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/guides/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/guides/documentation/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/programs/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/programs/MDEF/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/programs/fabacademy/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/programs/fabricademy/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/programs/templates/program_template/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/research/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/research/project%20contributions/popmachina/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/research/publications/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/research/publications/Books/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/research/publications/Journals%20and%20Papers/ - 2024-04-22 + 2024-05-28 daily https://knowledge.fablabbcn.org/tags.html - 2024-04-22 + 2024-05-28 daily \ No newline at end of file diff --git a/sitemap.xml.gz b/sitemap.xml.gz index a1f899f..d5b1ebd 100644 Binary files a/sitemap.xml.gz and b/sitemap.xml.gz differ