diff --git a/CM/CM3.qmd b/CM/CM3.qmd index 2c967bf..aa98496 100644 --- a/CM/CM3.qmd +++ b/CM/CM3.qmd @@ -12,3 +12,8 @@ changes from ferney # Idé # Bibliographie + +this is a cutation +[@Roux-Marchand2020; @Rowley2004] + +@Bustamante2015 \ No newline at end of file diff --git a/assets/references.bib b/assets/references.bib index 277feed..b03272b 100644 --- a/assets/references.bib +++ b/assets/references.bib @@ -1,64611 +1,32 @@ -@article{1390a, - title = {Advancing the Analysis of Technological Innovation Systems Dynamics: {{Introduction}} to the Special Issue}, - author = {K{\"o}hler, Jonathan and Raven, Rob and Walrave, Bob}, - year = {2020}, - month = may, - journal = {Technological Forecasting and Social Change}, - pages = {120040}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120040}, - urldate = {2020-05-23}, - file = {/Users/fabio/Zotero/storage/J4DM9MZM/Advancing the analysis of technological innovation systems dynamics- Introduction to the special issue.pdf} -} - -@article{a.WhatPrototypeWhat, - title = {What {{Is}} a {{Prototype}}? {{What Are}} the {{Roles}} of {{Prototypes}} in {{Companies}}?}, - author = {A., Lauff C. and D., Kotys-Schwartz and E., Rentschler M.}, - journal = {ASME J. Mech. Des.}, - volume = {140}, - number = {6}, - pages = {061102}, - urldate = {2021-02-16} -} - -@article{abad-seguraSustainableEconomicDevelopment2021, - title = {Sustainable {{Economic Development}} in {{Higher Education Institutions}}: {{A Global Analysis}} within the {{SDGs Framework}}}, - author = {{Abad-Segura}, Emilio and {Gonz{\'a}lez-Zamar}, Mariana-Daniela}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {294}, - pages = {126133}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126133}, - urldate = {2021-02-15} -} - -@article{Abbott2011, - title = {Explaining the Variation in Household Recycling Rates across the {{UK}}}, - author = {Abbott, Andrew and Nandeibam, Shasikanta and O'Shea, Lucy}, - year = {2011}, - journal = {Ecological Economics}, - volume = {70}, - number = {11}, - pages = {2214--2223}, - publisher = {{Elsevier B.V.}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2011.06.028}, - abstract = {Household waste recycling rates vary significantly both across and within regions of the UK. This paper attempts to explain the variation by using a new data set of waste recycling rates and policy determinants for all of the UK's 434 local authorities over the period 2006Q2 to 2008Q4. Our results suggest that the method of recycling collection chosen by policy makers is an important factor influencing the recycling rate. We also find an inverse relationship between the frequency of the residual waste collection and the recycling rate. \textcopyright{} 2011 Elsevier B.V.}, - isbn = {0921-8009}, - keywords = {Local authorities,Recycling rate,United Kingdom,Waste policy}, - file = {/Users/fabio/Zotero/storage/UWEVKHL4/Explaining the variation in household recycling rates across the UK.pdf} -} - -@article{abdallahArtificialIntelligenceApplications2020, - title = {Artificial Intelligence Applications in Solid Waste Management: {{A}} Systematic Research Review}, - author = {Abdallah, Mohamed and Abu Talib, Manar and Feroz, Sainab and Nasir, Qassim and Abdalla, Hadeer and Mahfood, Bayan}, - year = {2020}, - month = may, - journal = {Waste Management}, - volume = {109}, - pages = {231--246}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.04.057}, - urldate = {2020-05-27}, - abstract = {The waste management processes typically involve numerous technical, climatic, environmental, demographic, socio-economic, and legislative parameters. Such complex nonlinear processes are challenging to model, predict and optimize using conventional methods. Recently, artificial intelligence (AI) techniques have gained momentum in offering alternative computational approaches to solve solid waste management (SWM) problems. AI has been efficient at tackling ill-defined problems, learning from experience, and handling uncertainty and incomplete data. Although significant research was carried out in this domain, very few review studies have assessed the potential of AI in solving the diverse SWM problems. This systematic literature review compiled 85 research studies, published between 2004 and 2019, analyzing the application of AI in various SWM fields, including forecasting of waste characteristics, waste bin level detection, process parameters prediction, vehicle routing, and SWM planning. This review provides comprehensive analysis of the different AI models and techniques applied in SWM, application domains and reported performance parameters, as well as the software platforms used to implement such models. The challenges and insights of applying AI techniques in SWM are also discussed.}, - keywords = {Artificial intelligence,Deep learning,Machine learning,Modeling,Neural networks,Optimization} -} - -@article{abdelkafiBusinessModelsSustainability2016, - title = {Business {{Models}} for {{Sustainability From}} a {{System Dynamics Perspective}}}, - author = {Abdelkafi, Nizar and T{\"a}uscher, Karl}, - year = {2016}, - month = mar, - journal = {Organization and Environment}, - volume = {29}, - number = {1}, - pages = {74--96}, - publisher = {{SAGE Publications Inc.}}, - issn = {15527417}, - doi = {10.1177/1086026615592930}, - urldate = {2021-01-01}, - abstract = {To achieve sustainability, a firm has to transform its entire business logic. A business model for sustainability (BMfS) aims at creating value for various stakeholders and the natural environment. This article advances the current understanding of the basic functioning of BMfS by applying a systems perspective. Our BMfS understanding incorporates the natural environment as an essential element, but does not deal with sustainability from a broad perspective. The core logic of a BMfS is built upon the creation of a reinforcing feedback loop between the created value to the customers, the value captured by the firm, and the value to the natural environment. Consequently, we develop a graphical model based on system dynamics notation. First, we conceptualize the basic feedback loops. Then, we propose partial models for the firm, natural environment, entrepreneur/manager, and customer, and then integrate these partial models within a systemic, multilevel model. Finally, we generate propositions that combine insights from the model and extant literature.}, - keywords = {Bettervest,business case drivers,business models,environmental value proposition,feedback loops,sustainability,system delays,system dynamics,values\textendash beliefs\textendash norms theory (VBN) theory}, - file = {/Users/fabio/Zotero/storage/PSVIMF7M/full-text.pdf} -} - -@article{abidinTropesCelebrityEnvironmentalism2020, - title = {The {{Tropes}} of {{Celebrity Environmentalism}}}, - author = {Abidin, Crystal and Brockington, Dan and Goodman, Michael K. and Mostafanezhad, Mary and Ann Richey, Lisa}, - year = {2020}, - month = oct, - journal = {Annual Review of Environment and Resources}, - volume = {45}, - number = {1}, - publisher = {{Annual Reviews}}, - issn = {1543-5938}, - doi = {10.1146/annurev-environ-012320-081703}, - urldate = {2020-10-28}, - abstract = {Celebrity advocacy for environmental causes has grown dramatically in recent decades. An examination of this expansion and the rise of causes such as climate change reveals the shifting politics and organization of advocacy. We address these changes to the construction and interpretation of celebrity advocacy and detail how they have produced a rich variety of environmental celebrity advocates. We also account for differences between legacy (e.g., radio, TV, newspapers) and online celebrities and their practices (e.g., hashtag publics, brandjacking, online communities). Environmental celebrity advocates' performances can be divided into nine tropes, each characterized in part by the particular varieties of environmentalism that they promote. We present the tropes and discuss their five cross-cutting themes. We conclude with a set of questions for future research on celebrity environmentalism.Expected final online publication date for the Annual Review of Environment and Resources, Volume 45 is October 19, 2020. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.}, - keywords = {celebrity,consumer,environmentalism,inequality,legacy media,politics,social media,trope}, - file = {/Users/fabio/Zotero/storage/RZR4WD63/full-text.pdf} -} - -@article{Aboelmaged2019, - title = {Absorptive Capacity and Green Innovation Adoption in {{SMEs}}: {{The}} Mediating Effects of Sustainable Organisational Capabilities}, - author = {Aboelmaged, Mohamed and Hashem, Gharib}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {853--863}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.150} -} - -@article{Abson2014, - title = {Ecosystem Services as a Boundary Object for Sustainability}, - author = {Abson, D J and {von Wehrden}, H. and Baumg{\"a}rtner, S and Fischer, J and Hanspach, J and H{\"a}rdtle, W and Heinrichs, H and Klein, A M and Lang, D J and Martens, P and Walmsley, D}, - year = {2014}, - journal = {Ecological Economics}, - volume = {103}, - pages = {29--37}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2014.04.012}, - urldate = {2021-01-19}, - abstract = {Ecosystem services research has become a major academic field, drawing in various academic disciplines, perspectives, and research approaches. The multifaceted concept of "ecosystem services" includes a normative component, which has strong implicit links to the notion of sustainability. Yet, how ecosystem services research relates to sustainability has received little attention. We reviewed the current state of research on ecosystem services, and examined whether the concept's original motivation has allowed it to act as an effective boundary object for the integration of the diverse knowledge related to sustainability. A full-text, multivariate statistical analysis of 1388 peer-reviewed publications on ecosystem services from 1997 to 2011 revealed a rapidly growing but fragmented body of research, which has emphasized the development of descriptive understandings of human-nature interactions. Future challenges for the ecosystem services concept include greater integration of currently fragmented knowledge domains and stronger engagement with the concept's normative foundations. \textcopyright{} 2014 Elsevier B.V.}, - keywords = {Bibliographic analysis,Ecosystem services,Ethics,Multivariate statistics,Normative knowledge,Sustainability,Systems knowledge,Transformative knowledge}, - file = {/Users/fabio/Zotero/storage/AS3UZRNT/full-text.pdf} -} - -@article{absonLeveragePointsSustainability2017, - title = {Leverage Points for Sustainability Transformation}, - author = {Abson, David J. and Fischer, Joern and Leventon, Julia and Newig, Jens and Schomerus, Thomas and Vilsmaier, Ulli and {von Wehrden}, Henrik and Abernethy, Paivi and Ives, Christopher D. and Jager, Nicolas W. and Lang, Daniel J.}, - year = {2017}, - month = feb, - journal = {Ambio}, - volume = {46}, - number = {1}, - pages = {30--39}, - publisher = {{Springer Netherlands}}, - issn = {16547209}, - doi = {10.1007/s13280-016-0800-y}, - urldate = {2020-12-01}, - abstract = {Despite substantial focus on sustainability issues in both science and politics, humanity remains on largely unsustainable development trajectories. Partly, this is due to the failure of sustainability science to engage with the root causes of unsustainability. Drawing on ideas by Donella Meadows, we argue that many sustainability interventions target highly tangible, but essentially weak, leverage points (i.e. using interventions that are easy, but have limited potential for transformational change). Thus, there is an urgent need to focus on less obvious but potentially far more powerful areas of intervention. We propose a research agenda inspired by systems thinking that focuses on transformational `sustainability interventions', centred on three realms of leverage: reconnecting people to nature, restructuring institutions and rethinking how knowledge is created and used in pursuit of sustainability. The notion of leverage points has the potential to act as a boundary object for genuinely transformational sustainability science.}, - pmid = {27344324}, - keywords = {Human\textendash environment systems,Institutional change,Knowledge creation and use,Social\textendash ecological systems,Sustainability science,Transdisciplinarity}, - file = {/Users/fabio/Zotero/storage/R3ERXGVZ/full-text.pdf} -} - -@article{Abu2019, - title = {The Implementation of Lean Manufacturing in the Furniture Industry: {{A}} Review and Analysis on the Motives, Barriers, Challenges, and the Applications}, - author = {Abu, Falah and Gholami, Hamed and Mat Saman, Muhamad Zameri and Zakuan, Norhayati and Streimikiene, Dalia}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {234}, - pages = {660--680}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.279}, - urldate = {2020-05-21}, - abstract = {Although research on the adoption of lean manufacturing in the furniture industry in emerging economies is slowly progressing, its implementation has been emphasized by researchers and practitioners. Research on this scope is therefore limited, particularly when compared to the vast amount of scholarly studies contributed to successful implementation of lean in the developed countries. To support the narrow body of knowledge on this under-researched scope, this paper presents the current shortfalls of implementing the lean manufacturing in terms of motives, barriers, challenges, and applications. To address these issues, a methodological approach was implemented in two tiers. Firstly, a comprehensive review of state-of-the-art literature on the issues was performed followed by an analytic approach using a survey on 148 companies in Malaysia to finalize the research. Upon validation of the analyses, the results revealed that most of the lean companies agreed that the reasons for lean implementation are to increase efficiency, to clean up and organize the workplace, and to increase utilization of space. Non-lean companies believe that issues related to knowledge are the reasons for not undertaking lean implementation. However, lean companies believe that the obstacles are more about employee-related issues including lack of labor resources, lack of implementation know-how, and employee resistance to change. Lean companies also face challenges in the form of technical knowledge, training, and financial resources during the early phase of lean implementation. In addition, only three applications \textendash{} 5S, employee training, and quality control \textendash{} were found to be useable in the Malaysian wood and furniture industry. These findings present a critical view of the current shortfalls of lean implementation in the wood and furniture industry throughout Malaysia and other emerging economies.}, - keywords = {Furniture industry,Lean barriers,Lean implementation,Lean manufacturing,Lean tools} -} - -@article{abwahabUnsustainabilityEnvironmentallyUnethical2021, - title = {Is an Unsustainability Environmentally Unethical? {{Ethics}} Orientation, Environmental Sustainability Engagement and Performance}, - author = {Ab Wahab, Mastura}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {294}, - pages = {126240}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126240}, - urldate = {2021-02-20} -} - -@article{acerbiLiteratureReviewCircular2020, - title = {A Literature Review on Circular Economy Adoption in the Manufacturing Sector}, - author = {Acerbi, Federica and Taisch, Marco}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {273}, - pages = {123086}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123086}, - urldate = {2020-08-09}, - abstract = {This paper aims to investigate how the sustainable development is pursued by manufacturing companies according to the extant literature, especially by focusing on Circular Economy (CE) paradigm that is considered one of the major drivers for sustainability. Indeed, this research aims to study how CE principles have been adopted in the manufacturing sector leading towards the creation of Circular Manufacturing (CM) strategies. To achieve this goal, a systematic literature review has been conducted. Scopus and Web of Science are the scientific databases used for the review process. The 215 papers selected for the review were analysed through a theoretical framework developed by the authors. This framework enabled to individualize the research streams and the perspectives through which CE strategies adopted by manufacturers have been studied in the extant scientific literature. These research streams are technologies, and evaluation methods and models. Besides, both of these two are studied under two different lenses since they both are mutually considered supportive tools to shift or to maintain a circular system. To conclude, one of the major contributions of this literature review is to provide a clearer definition of CM and to figure out how CM strategies have been addressed by academics in the scientific literature, with the final aim to reduce the confusion emerged in the extant literature around this concept. Last, this review elucidates some scientific literature gaps and suggests future research directions.}, - keywords = {Circular economy,Circular manufacturing,Literature review,Manufacturing,Sustainability} -} - -@article{Achillas2015, - title = {A Methodological Framework for the Inclusion of Modern Additive Manufacturing into the Production Portfolio of a Focused Factory}, - author = {Achillas, Ch and Aidonis, D. and Iakovou, E. and Thymianidis, M. and Tzetzis, D.}, - year = {2015}, - journal = {Journal of Manufacturing Systems}, - volume = {37}, - pages = {328--339}, - publisher = {{The Society of Manufacturing Engineers}}, - issn = {02786125}, - doi = {10.1016/j.jmsy.2014.07.014}, - abstract = {Additive manufacturing (AM) is an advanced technology where products are manufactured by building up thin layers of materials from digitized three-dimensional (3D) designs virtually constructed using advanced computer-aided design software. This freeform fabrication enhances dramatically the potential of design, pushing the boundaries of manufacturability. The aim of this paper was to provide a decision-making framework for the selection of an effective portfolio of production strategies, including alternative AM and traditional manufacturing technologies. To that end, a methodological framework is proposed which combines multi-criteria decision aid (MCDA) and data envelopment analysis (DEA) for the determination of the optimal production strategy within the concept of "focused" factory. In this light, modern AM technologies are assessed for a number of selected criteria (e.g. production cost, lead time, quality) together with existing production strategies that involve conventional production methods, such as injection molding, CNC machining, etc. The adopted framework is applied on a real-world case regarding the production of security keyboard polymer housings. According to the findings, modern AM technologies provide efficient manufacturing solutions for small production volumes, thus enhancing supply chain responsiveness through make-to-order strategy and customization possibilities. Furthermore, AM seems capable to contribute also to traditional mass production systems, by improving significantly the productivity of injection molds. The proposed framework could not only assist decision-makers in the selection of the optimal production strategy, but it could also provide crucial benchmarks for different production alternatives.}, - isbn = {0278-6125}, - keywords = {3D printing,Additive manufacturing,Data envelopment analysis,Multicriteria analysis}, - file = {/Users/fabio/Zotero/storage/9CIKVFBU/A methodological framework for the inclusion of modern additive manufacturing into the production portfolio of a focused factory (2015).pdf} -} - -@article{Acton2015, - title = {The {{Evolving Role}} of {{Simulation}} in {{Teaching Surgery}} in {{Undergraduate Medical Education}}}, - author = {Acton, Robert D.}, - year = {2015}, - journal = {Surgical Clinics of North America}, - volume = {95}, - number = {4}, - pages = {739--750}, - publisher = {{Elsevier Inc}}, - issn = {15583171}, - doi = {10.1016/j.suc.2015.04.001}, - abstract = {Simulation-based training (SBT) over the last 10years has become a mainstay for surgical education at the graduate medical education (GME) level. More recently, however, the technique has rapidly become the standard for early efficient teaching of surgical skills and decision making at the undergraduate medical education (UME) level. The described benefits of SBT include its ability to compartmentalize education, to combine immediate assessment and feedback, and to accelerate knowledge and skill acquisition for the young learner. Consequently, SBT is now being adopted in multiple national medical student surgical educational initiatives.}, - isbn = {9780323393560}, - pmid = {26210967}, - keywords = {Education,Entrustable professional activity,Medical student,Standardized patient,Surgical simulation}, - file = {/Users/fabio/Zotero/storage/MYD22VGC/The Evolving Role of Simulation in Teaching Surgery in Undergraduate Medical Education.pdf} -} - -@article{Adamatzky2013, - title = {Creating and {{Maintaining Chemical Artificial Life}} by {{Robotic Symbiosis}}}, - author = {Hanczyc, Martin M. and Parrilla, Juan M. and Nicholson, Arwen and Yanev, Kliment and Stoy, Kasper}, - year = {2015}, - journal = {Artificial Life}, - volume = {21}, - number = {1}, - pages = {47--54}, - issn = {1064-5462}, - doi = {10.1162/ARTL_a_00151}, - abstract = {Abstract The plasmodium of the acellular slime mold Physarum polycephalum is a gigantic single cell visible to the unaided eye. The cell shows a rich spectrum of behavioral patterns in response to environmental conditions. In a series of simple experiments we demonstrate how to make computing, sensing, and actuating devices from the slime mold. We show how to program living slime mold machines by configurations of repelling and attracting gradients and demonstrate the workability of the living machines on tasks of computational geometry, logic, and arithmetic.}, - isbn = {1064-5462\textbackslash n1530-9185}, - keywords = {3d printer,artificial intelligence,droplet,protocell,robot,symbiosis}, - file = {/Users/fabio/Zotero/storage/4F3SXTRL/Hanczyc et al. - 2015 - Creating and Maintaining Chemical Artificial Life by Robotic Symbiosis.pdf} -} - -@article{Adamuthe2019, - title = {Technology Forecasting: {{A}} Case Study of Computational Technologies}, - author = {Adamuthe, Amol C. and Thampi, Gopakumaran T.}, - year = {2019}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {143}, - pages = {181--189}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.03.002}, - urldate = {2020-05-10}, - abstract = {This research presents trend projection and technology maturity curve of six computational technologies including three disruptive technologies namely mainframes, minicomputers and cloud computing. This investigation is beneficial to sensitize different stakeholders for making effective strategic policies and decisions. Time series data of patent and paper from U.S. patent office, European patent office, IEEE and ScienceDirect is used for forecasting. Use of two technology indicators from four sources made the forecasting results more reliable for decision makers. Six functions are tested to identify the best-fitted trend line. Results indicate that most of the technologies are better fitted to polynomial trend line of 2nd order. All computational technologies except cloud computing have undergone both upward and downward trends. Cloud computing shows a very high upward trend. Maturity curve is forecasted using the best-fitted growth curve method. Gompertz growth curve is better fitted than the logistic curve for many instances. Majority of the technologies follows introduction, growth, maturity and decline pattern. The life cycle pattern and growth rate of each technology is different. Growth pattern of mainframes and minicomputers is similar to the S-shaped curve. Growth pattern of grid computing and autonomic computing is similar to the ``S-shaped'' curve for research papers dataset.}, - keywords = {Computational technology,Growth curves,Maturity curve,Technology life cycle,Trend projection} -} - -@article{adarshDevelopmentInterconfirmatoryPlastic2022, - title = {Development of an Inter-Confirmatory Plastic Characterization System Using Spectroscopic Techniques for Waste Management}, - author = {Adarsh, U. K. and Bhoje Gowd, E. and Bankapur, Aseefhali and Kartha, V. B. and Chidangil, Santhosh and Unnikrishnan, V. K.}, - year = {2022}, - month = aug, - journal = {Waste Management}, - volume = {150}, - pages = {339--351}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.07.025}, - urldate = {2022-08-11}, - abstract = {Ever-accumulating amounts of plastic waste raises alarming concern over environmental and public health. A practical solution for addressing this threat is recycling, and the success of an industry-oriented plastic recycling system relies greatly on the accuracy of the waste sorting technique adapted. We propose a multi-modal spectroscopic sensor which combines laser-induced breakdown spectroscopy (LIBS) and Raman spectroscopy in a single optical platform for characterizing plastics based on elemental and molecular information to assist the plastic identification-sorting process in recycling industries. The unique geometry of the system makes it compact and cost-effective for dual spectroscopy. The performance of the system in classifying industrially important plastic classes counting PP, PC, PLA, Nylon-1 1, and PMMA is evaluated, followed by the application of the same in real-world plastics comprising PET, HDPE, and PP in different chemical-physical conditions where the system consumes less than 30~ms for acquiring LIBS-Raman signals. The evaluation of the system in characterizing commuting samples shows promising results to be applied in industrial conditions in future. The study on effect of physical\textendash chemical conditions of plastic wastes in characterizing them using the system shows the necessity for combining multiple techniques together. The proposal is not to determine the paramount methodology to characterize and sort plastics, but to demonstrate the advantages of dual-spectroscopy sensors in such applications. The outcomes of the study suggest that the system developed herein has the potential of emerging as an industrial-level plastic waste sorting sensor.}, - langid = {english}, - keywords = {Instrumentation,LIBS,Plastic Waste,Raman Spectroscopy}, - file = {/Users/fabio/Zotero/storage/EFHPYYGC/Adarsh et al_2022_Development of an inter-confirmatory plastic characterization system using.pdf;/Users/fabio/Zotero/storage/RS2RTEUV/S0956053X22003701.html} -} - -@article{AdditiveManufacturingGreen2023, - title = {Additive Manufacturing in Green Supply Chains: {{A}} Parametric Model for Life Cycle Assessment and Cost}, - shorttitle = {Additive Manufacturing in Green Supply Chains}, - year = {2023}, - month = mar, - journal = {Sustainable Production and Consumption}, - volume = {36}, - pages = {463--478}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.01.015}, - urldate = {2023-02-09}, - abstract = {The use of additive manufacturing (AM) can improve the green performance of supply chains. However, adopting a centralized or a decentralized supply c\ldots}, - langid = {english} -} - -@article{AddressingChallengesTechnology2019, - title = {Addressing the {{Challenges}} of {{Technology}} in {{Society}}: {{Including}} More {{Voices}}, {{Addressing Institutional Constraints}}, and {{Driving New Theoretical}} and {{Methodological Thinking}}}, - year = {2019}, - month = feb, - journal = {Technology in Society}, - volume = {56}, - pages = {iii}, - issn = {0160791X}, - doi = {10.1016/S0160-791X(19)30049-1}, - file = {/Users/fabio/Zotero/storage/T9U83DN5/Addressing the Challenges of Technology in Society- Including more Voices, Addressing Institutional Constraints, and Driving New Theoretical and Methodological Thinking.pdf} -} - -@article{Adebiyi-Abiola2019, - title = {Cleaning up Plastic Pollution in {{Africa}}}, - author = {{Adebiyi-Abiola}, By Bilikiss and Assefa, Solomon and Sheikh, Kareem and Garc{\'i}a, Jeannette M.}, - year = {2019}, - month = sep, - journal = {Science}, - volume = {365}, - number = {6459}, - pages = {1249--1251}, - publisher = {{American Association for the Advancement of Science}}, - issn = {10959203}, - doi = {10.1126/science.aax3539}, - urldate = {2020-04-08}, - file = {/Users/fabio/Zotero/storage/H23EKBHU/full-text.pdf} -} - -@article{adegbileEnvironmentsJointUniversityIndustry2021, - title = {Environments for {{Joint University-Industry Laboratories}} ({{JUIL}}): {{Micro-level}} Dimensions and Research Implications}, - author = {Adegbile, Abiodun Samuel and Sarpong, David and Kolade, Oluwaseun}, - year = {2021}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {170}, - pages = {120888}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120888}, - urldate = {2021-05-31} -} - -@article{Adeleke2020, - title = {Facility {{Location Problems}}: {{Models}}, {{Techniques}}, and {{Applications}} in {{Waste Management}}}, - author = {Adeleke, Olawale J. and Olukanni, David O.}, - year = {2020}, - month = may, - journal = {Recycling 2020, Vol. 5, Page 10}, - volume = {5}, - number = {2}, - pages = {10}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - doi = {10.3390/RECYCLING5020010}, - urldate = {2020-05-08}, - abstract = {This paper presents a brief description of some existing models of facility location problems (FLPs) in solid waste management. The study provides salient information on commonly used distance functions in location models along with their corresponding mathematical formulation. Some of the optimization techniques that have been applied to location problems are also presented along with an appropriate pseudocode algorithm for their implementation. Concerning the models and solution techniques, the survey concludes by summarizing some recent studies on the applications of FLPs to waste collection and disposal. It is expected that this paper will contribute in no small measure to an integrated solid waste management system with specific emphasis on issues associated with waste collection, thereby boosting the drive for effective and efficient waste collection systems. The content will also provide early career researchers with some necessary starting information required to formulate and solve problems relating to FLP.}, - keywords = {approximating/heuristic algorithms,environmental pollution,facility location problems,municipal solid waste,optimization techniques,waste management}, - file = {/Users/fabio/Zotero/storage/BUX78WUK/full-text.pdf} -} - -@techreport{ADEME2017, - title = {Encourager La R\'eparation via l'utilisation de l'impression {{3D}} et Des Espaces de Fabrication Num\'erique : {{Etat}} Des Lieux et {{Pistes}} d'actions}, - author = {{ADEME}}, - year = {2017}, - urldate = {2022-04-19}, - file = {/Users/fabio/Zotero/storage/YTCRIXVT/m-api-30ba1f6c-90a3-aa5d-0a88-18bc0bc7fdc0.pdf} -} - -@article{adjimanProcessSystemsEngineering2021, - title = {Process {{Systems Engineering Perspective}} on the {{Design}} of {{Materials}} and {{Molecules}}}, - author = {Adjiman, Claire S and Sahinidis, Nikolaos V and Vlachos, Dionisios G and Bakshi, Bhavik and Maravelias, Christos T and Georgakis, Christos}, - year = {2021}, - journal = {Cite This: Ind. Eng. Chem. Res}, - volume = {60}, - pages = {5194--5206}, - doi = {10.1021/acs.iecr.0c05399}, - urldate = {2021-09-20}, - abstract = {This paper aims to provide an overview of the current state of the art in molecule and material design and a perspective on open questions. First, we discuss the interplay between process design and the design of molecules and materials and then present the basic trade-offs and interdependencies that need to be considered in this integrated design problem. Second, we introduce methods and open questions in the area of processing materials, with special emphasis placed on heterogeneous catalysts due to their importance in the chemical industry. Finally, we discuss materials for photovoltaic cells as one example of a chemical product that is likely to help supply sustainable energy and address climate change concerns. What is presented here is based on presentations and discussions during the FIPSE-4 meeting in June 2018 (https://www.fi-in-pse.org/fipse-4-2018).}, - file = {/Users/fabio/Zotero/storage/SRXRWIWQ/full-text.pdf} -} - -@article{Afroz2017, - title = {The Knowledge, Awareness, Attitude and Motivational Analysis of Plastic Waste and Household Perspective in {{Malaysia}}}, - author = {Afroz, Rafia and Rahman, Ataur and Masud, Muhammad Mehedi and Akhtar, Rulia}, - year = {2017}, - month = jan, - journal = {Environmental Science and Pollution Research}, - volume = {24}, - number = {3}, - pages = {2304--2315}, - issn = {0944-1344}, - doi = {10.1007/s11356-016-7942-0} -} - -@article{afshariSocialSustainabilityIndicators2022, - title = {Social Sustainability Indicators: {{A}} Comprehensive Review with Application in the Energy Sector}, - author = {Afshari, H. and Agnihotri, S. and Searcy, C. and Jaber, M.Y.}, - year = {2022}, - month = may, - journal = {Sustainable Production and Consumption}, - volume = {31}, - pages = {263--286}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.02.018}, - urldate = {2022-03-13} -} - -@article{Agarwala1996, - title = {Structural Quality of Parts Processed by Fused Deposition}, - author = {Agarwala, Mukesh K. and Jamalabad, Vikram R. and Langrana, Noshir A and Safari, Ahmad and Whalen, Philip J and Danforth, Stephen C}, - year = {1996}, - month = dec, - journal = {Rapid Prototyping Journal}, - volume = {2}, - number = {4}, - pages = {4--19}, - issn = {1355-2546}, - doi = {10.1108/13552549610732034}, - urldate = {2015-03-05}, - file = {/Users/fabio/Zotero/storage/F553R8AY/Structural quality of parts processed by fused deposition.pdf} -} - -@inproceedings{agarwalaFilamentFeedMaterials, - title = {Filament {{Feed Materials}} for {{Fused Deposition Processing}} of {{Ceramics}} and {{Metals Filament Feedstock Characteristics}} for {{FD Processing Binders}} for {{FDC}} and {{FDMet Binder}} and {{Dispersant Development}} for {{FDC}} of {{Silicon Nitride}}}, - author = {Agarwala, M K and Weeren, R Van and Bandyopadhyay, A and Safari, A and Danforth, S C and Priedeman, W R}, - file = {/Users/fabio/Zotero/storage/NDV28UVT/Agarwala et al. - Unknown - Filament Feed Materials for Fused Deposition Processing of Ceramics and Metals Filament Feedstock Characteri.pdf} -} - -@inproceedings{agarwalaFusedDepositionCeramics1996, - title = {Fused {{Deposition}} of {{Ceramics}} and {{Metals}} : {{An Overview}}}, - booktitle = {Proceedings of {{Solid Freeform Fabrication Symposium}}}, - author = {Agarwala, M K and Weeren, R Van and Bandyopadhyayl, A and Whalen, P J and Safari, A and Danforth, S C}, - year = {1996}, - address = {{Austin, Texas, USA}}, - file = {/Users/fabio/Zotero/storage/FU644GTW/Agarwala et al. - 1996 - Fused Deposition of Ceramics and Metals An Overview.pdf} -} - -@article{agarwalBiodegradablePolymersPresent2020, - title = {Biodegradable {{Polymers}}: {{Present Opportunities}} and {{Challenges}} in {{Providing}} a {{Microplastic-Free Environment}}}, - author = {Agarwal, Seema}, - year = {2020}, - month = mar, - journal = {Macromolecular Chemistry and Physics}, - volume = {221}, - number = {6}, - publisher = {{Wiley-VCH Verlag}}, - issn = {15213935}, - doi = {10.1002/MACP.202000017}, - urldate = {2022-01-11}, - abstract = {The stability of polymers against environmental factors, chemicals, microorganisms, and hydrolysis has challenged society with the accumulation of plastic waste and its management worldwide. Large amounts of plastic litter accumulate in the environment and disintegrate into microplastics (small pieces less than 5 mm in size), a topic of real concern especially for products and applications where the plastics are used for a short time before becoming waste, and where they are difficult to recover after use and remain in the environment. Whether biodegradable polymers can be one of the solutions to the problem of plastic waste is a question very often raised in this context. Although the use of biodegradable polymers appears to be highly promising based on recent and past studies, several aspects need to be considered further regarding environmental sustainability, acceptability, and degradability in the complex natural environment. Intensive efforts need to be invested in developing new environmentally biodegradable polymers and smart mechanisms of degradation after use in the environment. The present viewpoint article discusses the present scenario of the environmental acceptability of biodegradable polymers and the opportunities and challenges they offer regarding solving the problem of microplastics and their impact on the environment.}, - keywords = {biodegradable polymers,compostability,environmental acceptability,microplastics,mineralization}, - file = {/Users/fabio/Zotero/storage/TSVG2XT4/full-text.pdf} -} - -@article{Agrawal2003, - title = {Advances in the {{Production}} of {{Poly}}({{Lactic Acid}}) {{Fibers}}. {{A Review}}}, - author = {Agrawal, Ashwini K. and Bhalla, Rahul}, - year = {2003}, - month = dec, - journal = {Journal of Macromolecular Science, Part C: Polymer Reviews}, - volume = {43}, - number = {4}, - pages = {479--503}, - issn = {1532-1797}, - doi = {10.1081/MC-120025975}, - urldate = {2014-03-20}, - file = {/Users/fabio/Zotero/storage/7QPKXIW8/Agrawal, Bhalla - 2003 - Advances in the Production of Poly(Lactic Acid) Fibers. A Review.pdf} -} - -@article{Agrawal2020, - title = {Sustainability Evaluation of Additive Manufacturing Processes Using Grey-Based Approach}, - author = {Agrawal, Rohit and S., Vinodh}, - year = {2020}, - month = jan, - journal = {Grey Systems: Theory and Application}, - volume = {10}, - number = {4}, - pages = {393--412}, - issn = {2043-9377}, - doi = {10.1108/GS-08-2019-0028}, - abstract = {Purpose-Sustainable manufacturing facilitates the development of products with lower environmental impact. Additive manufacturing (AM) processes are incorporated with sustainable characteristics such as minimum material consumption, energy efficiency and minimum transportation. The purpose of this paper is to report a study on sustainability evaluation of AM process using a grey-based approach. Design/methodology/approach-Sustainable AM process is gaining importance. From this viewpoint, this paper presents the evaluation of sustainability of AM process. The evaluation model includes 3 enablers, 18 criteria and 54 attributes. Grey-based approach is used for sustainability evaluation. Expert inputs are used for computing the grey index. Expert inputs are obtained and they are aggregated at three levels to calculate the overall grey performance index, which indicates sustainability level of AM processes. Furthermore, weaker areas are identified through determination of grey performance importance index (GPII) values. Findings-The calculated grey index is (3.510, 16.177), which implies that AM process is sustainable. Weaker attributes are determined on the basis of the computation of GPII values. Practical implications-The study has been executed on the basis of the opinion from experts with practical experience. Hence, the inferences are found to be practically feasible. The identified weaker attributes from the study would enable the manufacturers and practitioners to focus more on weaker areas for enhancing the sustainability of AM processes. The study has made an evaluation from sustainability perspective of AM processes, which would enable practitioners to assess AM processes from TBL sustainability orientation. Originality/value-The development of sustainability evaluation model and application of a grey-based approach for assessment of AM process are the original contributions of this study.}, - keywords = {grey numbers and its,models,operations,paper type research paper,practical applications of grey}, - file = {/Users/fabio/Zotero/storage/EV5VFAQC/agrawal2019.pdf} -} - -@article{agrawalSustainableDesignGuidelines2022, - title = {Sustainable Design Guidelines for Additive Manufacturing Applications}, - author = {Agrawal, Rohit}, - year = {2022}, - month = jan, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-09-2021-0251}, - urldate = {2022-02-09}, - abstract = {Additive manufacturing (AM) technologies have tremendous applications in industries owing to their unique advantages. Sustainable AM (SAM) is gaining significance because of lightweight structures, lattice geometries and customized parts for industrial applications. To facilitate design for SAM, design guidelines from AM and environment viewpoints are to be analyzed. In this context, this paper aims to present the analysis of SAM guidelines.,This work divides 26 identified SAM guidelines into four categories. Grey axiomatic design was used to calculate the weights of guidelines categories. Further, the grey technique for order preference by similarity to ideal solution was used as a solution methodology to prioritize the SAM guidelines.,The top identified guidelines are ``Design for reusability'' and ``Optimize part orientation for build time and roughness.'' Implementing proper design guidelines leads to many sustainable benefits such as minimum material consumption, energy consumption and emissions.,This study would facilitate Am product designers to deploy prioritized guidelines for enhancing the effectiveness of the additively manufactured product with sustainability benefits. The prioritized guidelines would guide the AM product designers to take maximum advantage of the AM process by deploying design for AM and design for environment guidelines. This study contributed a structured approach for design engineers and practitioners to deploy guidelines during the early stages of product design to ensure AM feasibility with minimal environmental impact.}, - keywords = {Additive manufacturing,Axiomatic design,Design for additive manufacturing,Design for environment,Guidelines,Sustainability,Sustainable additive manufacturing,TOPSIS} -} - -@article{agrawalSustainableMaterialSelection2021, - title = {Sustainable Material Selection for Additive Manufacturing Technologies: {{A}} Critical Analysis of Rank Reversal Approach}, - author = {Agrawal, Rohit}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {296}, - pages = {126500}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126500}, - urldate = {2021-03-14}, - abstract = {The world is moving towards a situation where resource scarcity leads to increased material cost, and the government is bound to dispose of heavy wastes generated by the growing population. Additive Manufacturing (AM) has bought a significant revolution in the current manufacturing processes. AM can fabricate complex and intricate shapes with ease. Material selection is an essential aspect in AM as a wide range of compatible materials available for AM. Appropriate material selection is necessary for cleaner production and sustainable development. Sustainable material selection considering various material properties and varied criteria can be effectively managed by Multi-Criteria Decision Making (MCDM) approach. However, several MCDM methods have a rank reversal problem, in which the rank of alternatives got changed when an alternative is added or removed from all considered alternatives. In this regard, this work presents a sustainable material selection of AM technologies. Sustainable material selection has been made for 3 a.m. technologies, namely Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA). Four MCDM techniques have been used to analyze and compare AM materials, namely SAW (Simple Additive Weighting), MOORA (Multi-Objective Optimization based on Ratio Analysis), TOPSIS (Technique for order performance by similarity to ideal solution), and VIKOR (Vlsekriterijumska Optimizacija I Kompromisno Resenje). Rank reversal problems associated with MCDM methods are also highlighted in the material selection stage. The results reveal that `TPU Elastomer', `Accura HPC{${'}$}, and `Duraform EX{${'}$} are identified as the best material for FDM, SLA, and SLS based AM technologies. Further, practical and research implications have been derived based on the study to help industrial practitioners, researchers, and decision-makers for the selection of the best materials in the product development stage to support cleaner production.}, - keywords = {Additive manufacturing,Cleaner production,Rank reversal,Sustainable development,Sustainable material selection} -} - -@article{Agudelo2017, - title = {A Taxonomy for Product Shape Analysis to Integrate in Early Environmental Impact Estimations}, - author = {Agudelo, Lina-Mar{\'i}a and Nadeau, Jean-Pierre and Pailhes, J{\'e}r{\^o}me and {Mej{\'i}a-Guti{\'e}rrez}, Ricardo}, - year = {2017}, - month = may, - journal = {International Journal on Interactive Design and Manufacturing (IJIDeM)}, - volume = {11}, - number = {2}, - pages = {397--413}, - issn = {1955-2513}, - doi = {10.1007/s12008-016-0337-0} -} - -@article{agudoPROPOSALASSESSMENTTOOL2022, - title = {{{PROPOSAL OF AN ASSESSMENT TOOL TO DIAGNOSE INDUSTRIAL SYMBIOSIS READINESS}}}, - author = {AGUDO, FABIANA LIAR and BEZERRA, B{\'A}RBARA STOLTE and PAES, LUIS ALBERTO BERTOLUCCI and GOBBO, JOS{\'E} ALCIDES}, - year = {2022}, - month = jan, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.01.013}, - urldate = {2022-01-25} -} - -@article{Aguilar-Hernandez2019, - title = {The Circularity Gap of Nations: {{A}} Multiregional Analysis of Waste Generation, Recovery, and Stock Depletion in 2011}, - author = {{Aguilar-Hernandez}, Glenn A. and {Sig{\"u}enza-Sanchez}, Carlos Pablo and Donati, Franco and Merciai, Stefano and Schmidt, Jannick and Rodrigues, Jo{\~a}o F.D. and Tukker, Arnold}, - year = {2019}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {151}, - pages = {104452}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104452} -} - -@article{aguilar-hernandezMacroeconomicSocialEnvironmental2020, - title = {Macroeconomic, Social and Environmental Impacts of a Circular Economy up to 2050: {{A}} Meta-Analysis of Prospective Studies}, - author = {{Aguilar-Hernandez}, Glenn A. and Rodrigues, Jo{\~a}o F.D. and Tukker, Arnold}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - pages = {123421}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123421}, - urldate = {2020-08-13} -} - -@article{Aguinis2019, - title = {Best {{Practices}} in {{Data Collection}} and {{Preparation}}: {{Recommendations}} for {{Reviewers}}, {{Editors}}, and {{Authors}}}, - author = {Aguinis, Herman and Hill, N. Sharon and Bailey, James R.}, - year = {2019}, - journal = {Organizational Research Methods}, - pages = {1--16}, - issn = {15527425}, - doi = {10.1177/1094428119836485}, - abstract = {We offer best-practice recommendations for journal reviewers, editors, and authors regarding data collection and preparation. Our recommendations are applicable to research adopting different epistemological and ontological perspectives\textemdash including both quantitative and qualitative approaches\textemdash as well as research addressing micro (i.e., individuals, teams) and macro (i.e., organizations, industries) levels of analysis. Our recommendations regarding data collection address (a) type of research design, (b) control variables, (c) sampling procedures, and (d) missing data management. Our recommendations regarding data preparation address (e) outlier management, (f) use of corrections for statistical and methodological artifacts, and (g) data transformations. Our recommendations address best practices as well as transparency issues. The formal implementation of our recommendations in the manuscript review process will likely motivate authors to increase transparency because failure to disclose necessary information may lead to a manuscript rejection decision. Also, reviewers can use our recommendations for developmental purposes to highlight which particular issues should be improved in a revised version of a manuscript and in future research. Taken together, the implementation of our recommendations in the form of checklists can help address current challenges regarding results and inferential reproducibility as well as enhance the credibility, trustworthiness, and usefulness of the scholarly knowledge that is produced.}, - keywords = {qualitative research,quantitative research,research design}, - file = {/Users/fabio/Zotero/storage/SUY8F8LV/ORMdatacollection.pdf} -} - -@article{Aguinis2020, - title = {Actionable Recommendations for Narrowing the Science-Practice Gap in Open Science}, - author = {Aguinis, Herman and Banks, George C. and Rogelberg, Steven G. and Cascio, Wayne F.}, - year = {2020}, - month = may, - journal = {Organizational Behavior and Human Decision Processes}, - volume = {158}, - pages = {27--35}, - publisher = {{Academic Press Inc.}}, - issn = {07495978}, - doi = {10.1016/j.obhdp.2020.02.007}, - urldate = {2020-03-27}, - abstract = {Efforts to promote open-science practices are, to a large extent, driven by a need to reduce questionable research practices (QRPs). There is ample evidence that QRPs are corrosive because they make research opaque and therefore challenge the credibility, trustworthiness, and usefulness of the scientific knowledge that is produced. A literature based on false-positive results that will not replicate is not only scientifically misleading but also worthless for anyone who wants to put knowledge to use. So, a question then arises: Why are these QRPs still so pervasive and why do gatekeepers of scientific knowledge such as journal editors, reviewers, funding-agency panel members, and board members of professional organizations in charge of journal policies not seem to be taking decisive actions about QRPs? We address these questions by using a science-practice analogy to identify the existence of a science-practice gap in open science. Specifically, although there is abundant research on how to reduce QRPs, many gatekeepers are not adopting this knowledge in their practices. Drawing upon the literatures on the more general science-practice gap and QRPs, we offer 10 actionable recommendations for narrowing the specific science-practice gap in open science. Our recommendations require little effort, time, and financial resources. Importantly, they are explicit about the resulting benefits for the various research-production stakeholders (i.e., authors and gatekeepers). By translating findings on open-science research into actionable recommendations for ``practitioners of research'', we hope to encourage more transparent, credible, and reproducible research that can be trusted and used by consumers of that research.}, - file = {/Users/fabio/Zotero/storage/9U9NTHKJ/full-text.pdf} -} - -@article{Ahangar2019, - title = {Current {{Biomedical Applications}} of {{3D Printing}} and {{Additive Manufacturing}}}, - author = {Ahangar, Pouyan and Cooke, Megan E and Weber, Michael H and Rosenzweig, Derek H}, - year = {2019}, - month = apr, - journal = {Applied Sciences}, - volume = {9}, - number = {8}, - pages = {1713}, - issn = {2076-3417}, - doi = {10.3390/app9081713}, - abstract = {Additive manufacturing (AM) has emerged over the past four decades as a cost-effective, on-demand modality for fabrication of geometrically complex objects. The ability to design and print virtually any object shape using a diverse array of materials, such as metals, polymers, ceramics and bioinks, has allowed for the adoption of this technology for biomedical applications in both research and clinical settings. Current advancements in tissue engineering and regeneration, therapeutic delivery, medical device fabrication and operative management planning ensure that AM will continue to play an increasingly important role in the future of healthcare. In this review, we outline current biomedical applications of common AM techniques and materials.} -} - -@article{Ahlqvist2020, - title = {Contextualising Weak Signals: {{Towards}} a Relational Theory of Futures Knowledge}, - author = {Ahlqvist, Toni and Uotila, Tuomo}, - year = {2020}, - month = mar, - journal = {Futures}, - volume = {119}, - pages = {102543}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102543}, - urldate = {2020-03-23}, - abstract = {In this paper we propose a framework to re-think and widen the theoretical assumptions behind so-called weak signal theory in futures studies. This paper suggests that the present understanding of weak signals views the topic as a question of linear emergence, that is, a sequence of development that perceives the topic evolving from an embryo towards a full-blown future issue or trend. However, this viewpoint does not take into account the context and perspective \textendash{} or positionality \textendash{} of the perceiver. This issue has, we argue, wide-ranging effects on the identification and interpretation of weak signals. Thus, as a response to this gap, we outline a relational theory of futures knowledge that aims to consider this missing theoretical baseline and widen the understanding of the nature and formation of weak signals. The theory builds on selected tenets of behavioural economics, psychology, human geography and anthropology. This paper outlines the principles of current weak signal theory and depicts the relational theory. It also provides selected empirical examples to emphasise the points made.}, - keywords = {Context,Emergence,Futures knowledge,Perspective,Relational theory,Weak signal} -} - -@article{ahmadi-ghWhyManufacturingNot2022, - title = {Why Is Manufacturing Not More Sustainable? {{The}} Effects of Different Sustainability Practices on Sustainability Outcomes and Competitive Advantage}, - author = {{Ahmadi-Gh}, Zahra and {Bello-Pintado}, Alejandro}, - year = {2022}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {337}, - pages = {130392}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130392}, - urldate = {2022-01-25} -} - -@article{ahmadovaTooGoodBe2022, - title = {Too Good to Be True: {{The}} Inverted {{U-shaped}} Relationship between Home-Country Digitalization and Environmental Performance}, - author = {Ahmadova, Gozal and {Delgado-M{\'a}rquez}, Blanca L. and Pedauga, Luis E. and {Leyva-de la Hiz}, Dante I.}, - year = {2022}, - month = jun, - journal = {Ecological Economics}, - volume = {196}, - pages = {107393}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2022.107393}, - urldate = {2022-03-14} -} - -@article{Ahmed2016, - title = {A Comparative Decision-Making Model for Sustainable End-of-Life Vehicle Management Alternative Selection Using {{AHP}} and Extent Analysis Method on Fuzzy {{AHP}}}, - author = {Ahmed, Shameem and Ahmed, Shamsuddin and Shumon, Md. Rezaul Hasan and Falatoonitoosi, Elham and Quader, M. Abdul}, - year = {2016}, - month = jan, - journal = {International Journal of Sustainable Development \& World Ecology}, - volume = {23}, - number = {1}, - pages = {83--97}, - issn = {1350-4509}, - doi = {10.1080/13504509.2015.1062814} -} - -@article{Ahmed2016a, - title = {Prioritizing {{Strategies}} for {{Sustainable End-of-Life Vehicle Management Using Combinatorial Multi-Criteria Decision Making Method}}}, - author = {Ahmed, Shameem and Ahmed, Shamsuddin and Shumon, Md. Rezaul Hasan and Quader, M. Abdul and Cho, Haeng Muk and Mahmud, Md. Iqbal}, - year = {2016}, - month = jun, - journal = {International Journal of Fuzzy Systems}, - volume = {18}, - number = {3}, - pages = {448--462}, - issn = {1562-2479}, - doi = {10.1007/s40815-015-0061-0} -} - -@article{ahmedChallengesCompetenciesEntrepreneurial2021, - ids = {Ahmed2021}, - title = {Challenges and Competencies of Entrepreneurial Leaders in Driving Innovation at {{DIY}} Laboratories}, - author = {Ahmed, Fida and Harrison, Christian}, - year = {2021}, - month = mar, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--15}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1908538}, - urldate = {2021-04-21}, - abstract = {Do-It-Yourself laboratories (DIY labs) are autonomous community-based science research spaces that facilitate creative experiments independently in an unstructured location. The research on do-it-yourself (DIY) laboratories is emerging and there remain various questions to answer about the structure, leadership style, innovation strategies and environmental and public safety policies of DIYs. Keeping in view various challenges of DIY labs, this study theoretically highlights the challenges of DIY labs and competencies required for DIY leaders in coping with challenges and driving innovation. Drawing on existing literature of entrepreneurial leadership competencies, this paper proposes a comprehensive entrepreneurial leadership competency model comprising of personal, functional, interpersonal, technological, ethical and environmental competencies. This study offers insights into the relationship between entrepreneurial leadership and DIY innovation, thus laying a foundation for further research in this domain. The competency model proposed in this study helps individuals to understand and learn the capabilities of becoming more effective DIY entrepreneurial leaders and foster innovation and creativity in DIY labs.}, - keywords = {DIY innovation,entrepreneurial leadership,Entrepreneurship,laboratories,leadership}, - file = {/Users/fabio/Zotero/storage/TZQJF65G/full-text.pdf} -} - -@article{ahmedDigitalPlatformCapability2022, - title = {Digital Platform Capability and Organizational Agility of Emerging Market Manufacturing {{SMEs}}: {{The}} Mediating Role of Intellectual Capital and the Moderating Role of Environmental Dynamism}, - author = {Ahmed, Adeel and Bhatti, Sabeen Hussain and G{\"o}lgeci, Ismail and Arslan, Ahmad}, - year = {2022}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {177}, - pages = {121513}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2022.121513}, - urldate = {2022-01-25} -} - -@article{Ahn2002, - title = {Anisotropic Material Properties of Fused Deposition Modeling {{ABS}}}, - author = {Ahn, Sung-Hoon and Montero, Michael and Odell, Dan and Roundy, Shad and Wright, Paul K.}, - year = {2002}, - journal = {Rapid Prototyping Journal}, - volume = {8}, - number = {4}, - pages = {248--257}, - issn = {1355-2546}, - doi = {10.1108/13552540210441166}, - urldate = {2013-03-01}, - keywords = {anisotropy,fused deposition modeling,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/YBLLWUF9/Ahn et al. - 2002 - Anisotropic material properties of fused deposition modeling ABS.pdf} -} - -@article{Ahn2009, - title = {Representation of Surface Roughness in Fused Deposition Modeling}, - author = {Ahn, Daekeon and Kweon, Jin-Hwe and Kwon, Soonman and Song, Jungil and Lee, Seokhee}, - year = {2009}, - month = aug, - journal = {Journal of Materials Processing Technology}, - volume = {209}, - number = {15-16}, - pages = {5593--5600}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2009.05.016}, - urldate = {2013-03-24}, - keywords = {fused deposition modeling}, - file = {/Users/fabio/Zotero/storage/4APD5NJQ/Ahn et al. - 2009 - Representation of surface roughness in fused deposition modeling.pdf} -} - -@article{Ahuja2019, - title = {Do Human Critical Success Factors Matter in Adoption of Sustainable Manufacturing Practices? {{An}} Influential Mapping Analysis of Multi-Company Perspective}, - author = {Ahuja, Jaya and Panda, Tapan Kumar and Luthra, Sunil and Kumar, Anil and Choudhary, Sangita and {Garza-Reyes}, Jose Arturo}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {117981}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117981} -} - -@article{Aires2008, - title = {Probabilidad y Estadistica}, - author = {Aires, Buenos and Murray, R}, - year = {2008}, - number = {Bo 2}, - pages = {1970--1971}, - isbn = {9786074813388}, - file = {/Users/fabio/Zotero/storage/XR3V3LHT/Probabilidad y estadistica.pdf} -} - -@article{Ajzen1991, - title = {The Theory of {{Planned Behavior}}}, - author = {Ajzen, Icek}, - year = {1991}, - journal = {Organizational behavior and human decision processes}, - volume = {50}, - number = {2}, - pages = {179--211}, - file = {/Users/fabio/Zotero/storage/ERISSN6H/60. The theory of planned behavior.pdf} -} - -@article{akanoStakeholderConsiderationsRemanufacturability2021, - title = {Stakeholder Considerations in Remanufacturability Decision-Making: {{Findings}} from a Systematic Literature Review}, - author = {Akano, Damola Ikeoluwa and Ijomah, Winifred and Windmill, James}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {298}, - pages = {126709}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126709}, - urldate = {2021-04-29}, - abstract = {Remanufacturing is a sustainable product recovery strategy with environmental, economic and social benefits. Remanufacturability assessment, the process of deciding whether or not to remanufacture an end-of-life or end-of-use product, is complex and has a high level of uncertainty. Several tools and methods have been proposed to reduce this complexity without compromising the effectiveness and inclusiveness of the process. However, there is a lack of comprehensive review of the decision factors and how they fulfil the requirements of different stakeholders that are critical to the success of remanufacturing systems. This study fills the gap by performing a systematic literature review of decision factors with the aim of understanding how the requirements of stakeholders have been accounted for in remanufacturability decision-making. Decision factors that have been used to represent the different stakeholders were identified and discussed. Findings revealed the lack of research on including consumer requirements in remanufacturability decision-making. Future research should focus on bridging the gap between consumers and other stakeholders, especially during the remanufacturability decision-making process. The novelty is that this is the first study that comprehensively reviews decision factors in remanufacturability assessment from the perspectives of the different stakeholders and provide insights on the impact of consumer requirements on remanufacturability decision-making.}, - keywords = {Consumer,Decision-making,Remanufacturability,Remanufacturing} -} - -@incollection{Akerdad2020, - title = {Product Development Process Based on Open Technologies}, - author = {Akerdad, Mohammed and Aboutajeddine, Ahmed and El Majdoubi, Mohamed}, - year = {2020}, - pages = {524--532}, - doi = {10.1007/978-3-030-27146-6_57}, - file = {/Users/fabio/Zotero/storage/WBSS8GXE/Akerdad et al_2020_Product development process based on open technologies.pdf} -} - -@article{Akesson2016, - title = {Mechanical {{Recycling}} of {{PLA Filled}} with a {{High Level}} of {{Cellulose Fibres}}}, - author = {{\AA}kesson, Dan and Vrignaud, Thomas and Tissot, Cl{\'e}ment and Skrifvars, Mikael}, - year = {2016}, - journal = {Journal of Polymers and the Environment}, - issn = {1566-2543}, - doi = {10.1007/s10924-016-0760-0}, - keywords = {acid \'a ageing,biocomposite \'a biopolymer \'a,recycling \'a,repeated processing \'a polylactic}, - file = {/Users/fabio/Zotero/storage/QI893IU2/Mechanical Recycling of PLA Filled with a High Level of Cellulose Fibres.pdf} -} - -@article{Akhoundi2019, - title = {An Innovative Design Approach in Three-Dimensional Printing of Continuous Fiber\textendash Reinforced Thermoplastic Composites via Fused Deposition Modeling Process: {{In-melt}} Simultaneous Impregnation}, - author = {Akhoundi, Behnam and Behravesh, Amir Hossein and Bagheri Saed, Arvin}, - year = {2020}, - month = apr, - journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, - volume = {234}, - number = {1-2}, - pages = {243--259}, - publisher = {{SAGE PublicationsSage UK: London, England}}, - issn = {20412975}, - doi = {10.1177/0954405419843780}, - urldate = {2021-08-31}, - abstract = {In this study, an innovative method was devised and implemented to produce continuous glass fiber\textendash reinforced thermoplastic composites via a fused deposition modeling three-dimensional printer to enhance the mechanical properties of the printed products. In the extrusion-based, or filament-based, additive manufacturing process, namely, fused deposition modeling, the parts are basically formed via deposition of the material in the molten state, and thus embedding continuous fiber, in a solid form, is highly challenging. Hence, a nozzle system was designed and manufactured to feed the continuous fiber into the molten polymer simultaneously, which is called, here, in-melt simultaneous impregnation. With the presence of continuous fibers in the nozzle outlet, the feed of filament was calculatedly adjusted in the G-codes depending on the fiber volume percentage, to produce sound flow, and consistent deposition. Composite products were produced with various geometrical shapes. Via analysis and close control of the filament feeding, as a critical requirement to produce a sound printed product, composites with various fiber volume percentages were printed. Also, the mechanical properties of the printed parts with 30\% by volume of glass fiber were measured. The results of the tensile test indicated that the continuous fibers were appropriately and effectively embedded that could result in remarkable increases in tensile strength and modulus of the samples, higher than 700\%. The resulted values of tensile modulus were consistent with the values calculated via the rule of mixture. In addition, scanning electron microscopic images of the fracture sections suggest a sound adhesion between fibers and the matrix.}, - keywords = {continuous fiber\textendash reinforced thermoplastic composit,fused deposition modeling,Three-dimensional printing}, - file = {/Users/fabio/Zotero/storage/V63DGZVS/full-text.pdf} -} - -@article{Al-Aomar2019, - title = {A Service-Oriented Material Management Model with Green Options}, - author = {{Al-Aomar}, Raid and Alshraideh, Hussam}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117557}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.07.032}, - urldate = {2020-05-15}, - abstract = {The debate on the sustainability of service supply chain has recently become notorious with the increased environmental and economic impacts of service materiality. Cost-effective material management in the service domain has, therefore, become a competitive priority and a means for sustainability. This essentially requires the development of quantitative models with green options for optimizing material sourcing, transportation, inventory, processing, and reverse logistics. It is, however, a challenge to assess and integrate the economic and environmental costs of material procurement and consumption within service systems. The gap is more evident in service-only supply chains such as tourism, finance, and healthcare. Thus, this paper develops a service-oriented optimization model with green options for effective material management in a service environment. The developed model is focused on managing the material procurement and processing across the supply chain of a service firm (a hotel supply chain as an example). Mathematical formulation is first provided for a deterministic single-order model and this is then extended to a multi-period comprehensive material planning model. Proposed formulations are demonstrated through a simulated supply chain of accommodation services in a hotel. The theoretical and practical implications of the results are discussed along with directions for future research. The value-added of this research is providing insight into material management across service supply chains, optimizing material assignment to offered services, and extending the impacts of green options to the whole supply chain of hotels and accommodation services.}, - keywords = {Hotel services,Linear programming,Material management,Service systems,Sustainable supply chains} -} - -@article{Al-Khatib2010, - title = {Solid Waste Characterization, Quantification and Management Practices in Developing Countries. {{A}} Case Study: {{Nablus}} District \textendash{} {{Palestine}}}, - author = {{Al-Khatib}, Issam A. and Monou, Maria and Abu Zahra, Abdul Salam F. and Shaheen, Hafez Q. and Kassinos, Despo}, - year = {2010}, - month = may, - journal = {Journal of Environmental Management}, - volume = {91}, - number = {5}, - pages = {1131--1138}, - issn = {03014797}, - doi = {10.1016/j.jenvman.2010.01.003} -} - -@article{Al-Salem2010, - title = {The Valorization of Plastic Solid Waste ({{PSW}}) by Primary to Quaternary Routes: {{From}} Re-Use to Energy and Chemicals}, - author = {{Al-Salem}, S.M. and Lettieri, P. and Baeyens, J.}, - year = {2010}, - month = feb, - journal = {Progress in Energy and Combustion Science}, - volume = {36}, - number = {1}, - pages = {103--129}, - publisher = {{Elsevier Ltd}}, - issn = {03601285}, - doi = {10.1016/j.pecs.2009.09.001}, - abstract = {Polymers are the most versatile material in our modern day and age. With certain chemicals and additives (pigments, concentrates, anti-blockers, light transformers (LTs), UV-stabilizers, etc.), they become what we know as plastics. The aim of this review is to provide the reader with an in depth analysis regarding the recovery, treatment and recycling routes of plastic solid waste (PSW), as well as the main advantages and disadvantages associated with every route. Recovery and recycling of PSW can be categorized by four main routes, i.e. re-extrusion, mechanical, chemical and energy recovery. Re-extrusion (primary recycling) utilizes scrap plastics by re-introducing the reminder of certain extruded thermoplastics (mainly poly-??-olefins) into heat cycles within a processing line. When plastic articles are discarded after a number of life cycles, mechanical recycling techniques present themselves as a candidate for utilizing a percentage of the waste as recyclate and/or fillers. Collectively, all technologies that convert polymers to either monomers (monomer recycling) or petrochemicals (feedstock recycling) are referred to as chemical recycling. The technology behind its success is the depolymerization processes (e.g. thermolysis) that can result in a very profitable and sustainable industrial scheme, providing a high product yield and a minimal waste. Nevertheless, due to their high calorific value and embodied energy, plastics are being incinerated solely or in combination with municipal solid waste (MSW) in many developed countries. This review also presents a number of application and technologies currently being used to incinerate plastics. Cement kilns and fluidized beds are the two most common units used to recover energy from PSW or MSW with high PSW content. It is concluded that, tertiary (chemical methods) and quaternary (energy recovery) are robust enough to be investigated and researched in the near future, for they provide a very sustainable solution to the PSW cycle. ?? 2009 Elsevier Ltd. All rights reserved.}, - isbn = {0360-1285}, - keywords = {Direct combustion,Incineration,Life cycle,Plastic solid waste (PSW),Poly-??-olefins,Thermolysis}, - file = {/Users/fabio/Zotero/storage/A6CWX695/The valorization of plastic solid waste (PSW) by primary to quaternary routes From re-use to energy and chemicals.pdf} -} - -@article{Al-Saud2017, - title = {Feedback and Motor Skill Acquisition Using a Haptic Dental Simulator}, - author = {{Al-Saud}, L. M. and Mushtaq, F. and Allsop, M. J. and Culmer, P. C. and Mirghani, I. and Yates, E. and Keeling, A. and {Mon-Williams}, M. A. and Manogue, M.}, - year = {2017}, - journal = {European Journal of Dental Education}, - volume = {21}, - number = {4}, - pages = {240--247}, - issn = {16000579}, - doi = {10.1111/eje.12214}, - abstract = {To investigate the effect of qualitatively different types of pedagogical feedback (FB) on the training, transfer and retention of basic manual dexterity dental skills using a virtual reality (VR) haptic dental simulator. Sixty-three participants (M~=~22.7~years; SD~=~3.4~years), with no previous dental training, were randomly allocated to one of three groups (n~=~21 each). Group 1 received device-only feedback during the training phase, that is the visual display of the simulator (DFB); Group 2 received verbal feedback from a qualified dental instructor (IFB); and Group 3 received a combination of instructor and device feedback (IDFB). Participants completed four tasks during which feedback was given according to group allocation as well as two skills transfer tests. Skill retention was examined immediately after training, at 1~week and at 1~month post-test. Statistically significant differences were found between the groups in overall performance (P~{$<~$}0.001) and error (P~=~0.006). Post hoc comparisons revealed the IDFB group produced substantially better performance and fewer errors in comparison with DFB and IFB training. This difference translated to improved performance in skill retention and generalisation of knowledge to novel tasks. These data indicate that the acquisition and retention of basic dental motor skills in novice trainees is best optimised through a combination of instructor and visual display (VR)-driven feedback. The results have implications for the utility and implementation of VR haptic technology in dental education.}, - pmid = {27324833}, - keywords = {dentistry,feedback,motor learning,skill acquisition,undergraduate dental education,virtual reality}, - file = {/Users/fabio/Zotero/storage/ZTX3UTU9/Feedback and motor skill acquisition using a haptic dental simulator.pdf} -} - -@article{Alaerts2018, - title = {Impact of {{Bio-Based Plastics}} on {{Current Recycling}} of {{Plastics}}}, - author = {Alaerts, Luc and Augustinus, Michael and Van Acker, Karel}, - year = {2018}, - month = may, - journal = {Sustainability}, - volume = {10}, - number = {5}, - pages = {1487}, - issn = {2071-1050}, - doi = {10.3390/su10051487} -} - -@article{Alafaghani2018, - title = {Investigating the Effect of Fused Deposition Modeling Processing Parameters Using {{Taguchi}} Design of Experiment Method}, - author = {aldin Alafaghani, Ala'aldin and Qattawi, Ala}, - year = {2018}, - month = dec, - journal = {Journal of Manufacturing Processes}, - volume = {36}, - pages = {164--174}, - publisher = {{Elsevier Ltd}}, - issn = {15266125}, - doi = {10.1016/j.jmapro.2018.09.025}, - urldate = {2020-12-03}, - keywords = {Additive manufacturing,Additive manufacturing FDM,Design-for-manufacturing,FDM,Rapid prototyping,Taguchi's DOE}, - file = {/Users/fabio/Zotero/storage/TU5EXMJI/Alafaghani, Qattawi - 2018 - Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experim.pdf} -} -@article{alamCanEducationInternational2020, - title = {Can Education as an `{{International Commodity}}' Be the Backbone or Cane of a Nation in the Era of Fourth Industrial Revolution? - {{A Comparative}} Study}, - author = {Alam, Gazi Mahabubul and Forhad, Abdur Rahman and Ismail, Ismi Arif}, - year = {2020}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {159}, - pages = {120184}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120184}, - urldate = {2020-07-20}, - abstract = {Governments of developing nations and `development partners' consider education as an `international product' that makes economic advancement possible. Hence, education in developing nations is always sluggish in responding to the changes of contemporary concepts. The fourth industrial revolution is a concept that explains the latest stage of economic development. When many developed countries' education systems are still struggling to cope with this concept, developing countries want to copy them. Thus, the question can be asked: can a copied `international product' necessarily support the `national development' or ultimately assist `international development'? Using philosophical debates as a metaphor, some studies have attempted to answer. In the era of globalization, foreign income is the most important element of national development. This comparative study is the first to investigate the influence of education in earning foreign income. Multi-national data collected by designated agencies from both developed and developing nations are used. Findings show that quantitative and qualitative indicators of education in developing countries are figuratively catching up with the advanced economies. Certain industries need highly skilled individuals to grow the amount of a nation's foreign income. Education systems in developed counterparts are able to produce skilled graduates who contribute significantly for foreign income. For developing economies, foreign income mainly depends on low-skilled industry sectors. Education in developing countries is discussed here in terms of `Dependency Theory'.}, - keywords = {Backbone and education,Capitalism in education,Dependency theory,Education and development,Education and technology,Fourth industrial revolution,Globalized education,Human capital theory} -} - -@article{alarcon-gerbierWasteRecyclingDecentralized2023, - title = {Waste Recycling through a Decentralized Network of Mobile Facilities}, - author = {{Alarcon-Gerbier}, Eduardo and Lin{\ss}, Florian and Buscher, Udo}, - year = {2023}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {415}, - pages = {137773}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137773}, - urldate = {2023-07-03}, - abstract = {Mobile and modular recycling facilities have been developed in recent years, which can promote both the expansion of recycling capacity and the decentralization of waste treatment. Due to the miniaturization of these recycling units and their installation in standard containers, it is possible to relocate them from site to site at short notice, allowing for a more agile response to spatial and temporal waste generation. The planning of such a network involves the integration of location, production, and transport decisions. Therefore, this article presents a mixed-integer programming model to plan the relocation of the mobile recycling units so that the total costs of transport, recycling, and facility relocation are minimized. In addition, the economic value and environmental impact of mobile recycling networks are investigated through a sensitivity analysis, showing the benefit of movable recycling capacities. A case study analysis reveals that deploying modular units reduces overall recycling costs by about 10\%, although extra costs are required to operate and relocate the mobile recycling units.}, - langid = {english}, - keywords = {Facility location problem,Mobile production unit,Optimization,Production-routing problem,Waste management}, - file = {/Users/fabio/Zotero/storage/GGXY8SRC/S0959652623019315.html} -} - -@article{Alassali2020, - title = {Validation of near Infrared Spectroscopy as an Age-Prediction Method for Plastics}, - author = {Alassali, Ayah and Picuno, Caterina and B{\'e}bien, Tom and Fiore, Silvia and Kuchta, Kerstin}, - year = {2020}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {154}, - pages = {104555}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104555} -} - -@article{alassaliHigherQualityRecycled2021, - ids = {alassali2021a}, - title = {Towards {{Higher Quality}} of {{Recycled Plastics}}: {{Limitations}} from the {{Material}}\’s {{Perspective}}}, - author = {Alassali, Ayah and Picuno, Caterina and Chong, Zhi Kai and Guo, Jinyang and Maletz, Roman and Kuchta, Kerstin and Hahladakis, N and Iacovidou, Eleni and Ulphard, Eggo and Van Velzen, Thoden}, - year = {2021}, - month = nov, - journal = {Sustainability 2021, Vol. 13, Page 13266}, - volume = {13}, - number = {23}, - pages = {13266}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {20711050}, - doi = {10.3390/SU132313266}, - urldate = {2021-12-17}, - abstract = {The increasing consumption of plastics and plastic products results in correspondingly substantial volumes of waste, which poses considerable environmental burdens. With the ongoing environmental actions, the application of circular economy on this waste stream is becoming inevitable. In this paper, the topics of plastics recycling, circular economy on plastics, and challenges to plastic waste recycling are critically reviewed. In the first part of this paper, the development of research on plastic recycling was viewed from 1950 until 2020 using the scientific database Web of Science, and 682 related studies were found and used to assess the changing research priorities along that timeline. The following sections discuss the potentials and requirements to enhance the quality of the produced recycled plastic, in connection with the factors that currently limit it. In conclusion, the quality of recycled plastic is generally determined by the homogeneity of the recovered plastic feed. There are various strategies which could be implemented to overcome the hindrances identified in the paper and to improve the quality of the recycled plastic, such as working on enhanced product designs for minimised waste heterogeneity and controlling the materials\’ degree of contamination by applying advanced sorting.}, - keywords = {limitations plastic recycling,mechanical recycling,plastic waste,recycled material quality}, - file = {/Users/fabio/Zotero/storage/24L4U2VJ/full-text.pdf;/Users/fabio/Zotero/storage/ADWUCN6B/13266.html} -} - -@article{alavipanahIntegratingThirdDimension2017, - title = {Integrating the Third Dimension into the Concept of Urban Ecosystem Services: {{A}} Review}, - author = {Alavipanah, Sadroddin and Haase, Dagmar and Lakes, Tobia and Qureshi, Salman}, - year = {2017}, - journal = {Ecological Indicators}, - volume = {72}, - pages = {374--398}, - doi = {10.1016/j.ecolind.2016.08.010}, - urldate = {2021-12-13}, - abstract = {The spatial configuration of urban environments and its impact on local and global ecological functions were the subject of recent urban ecosystem service (UES) research projects. The outcomes of these projects with respect to the data they used, however, mainly consisted of two dimensions (2D). Studies that assess aspects of the third dimension (3D) of UES-such as height, volume and shadowing effects-were absent. The objective of this paper is to contribute to a better understanding of the local ecological functions based on knowledge of three-dimensional UES. 298 articles were selected for in-depth critical analyses. The technical and computational approaches for extracting urban 3D structures and 3D structures of vegetation were the focus of the reviewed literature. Authors' affiliations would be a better indicator for assessing the spatial distribution of articles. Uneven distribution of knowledge among countries is related to the technical and scientific advancement of countries. There was a shift in the sub-theme of reviewed publications discussing the concept of ecosystem services in the first few years, while later researchers' interests moved towards UES and adaptation of cities to the changing climate. Further studies should progress in the development of both 3D data and results. Implementing 3D data and results helps to better understand the coupling of humans and their environs. It will be then a critically important step toward developing ecologically friendly cities.}, - keywords = {Cities,Review,Third dimension,Urban ecosystem services}, - file = {/Users/fabio/Zotero/storage/YSDSESDC/full-text.pdf} -} - -@article{alba-patinoSocialIndicatorsEcosystem2021, - title = {Social Indicators of Ecosystem Restoration for Enhancing Human Wellbeing}, - author = {{Alba-Pati{\~n}o}, Daniela and Carabassa, Vicen{\c c} and Castro, Hermelindo and {Guti{\'e}rrez-Brice{\~n}o}, In{\'e}s and {Garc{\'i}a-Llorente}, Marina and Giagnocavo, Cynthia and {G{\'o}mez-Tenorio}, Miguel and Cabello, Javier and {Aznar-S{\'a}nchez}, Jos{\'e} A. and Castro, Antonio J.}, - year = {2021}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {174}, - pages = {105782}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105782}, - urldate = {2021-07-20}, - file = {/Users/fabio/Zotero/storage/KVX2HJUC/full-text.pdf} -} - -@article{Albats2020, - title = {Companies' Human Capital for University Partnerships: {{A}} Micro-Foundational Perspective}, - author = {Albats, Ekaterina and Bogers, Marcel and Podmetina, Daria}, +@inproceedings{Roux-Marchand2020, + title = {Connecting the Strategic Intent of Innovation Labs and Projects: The Case of the {{Green Fablab}}}, + booktitle = {2020 {{IEEE International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}}/{{ITMC}})}, + author = {{Roux-Marchand}, Thibaut and Cruz, Fabio and Dupont, Laurent and Camargo, Mauricio and Osorio, Ferney}, year = {2020}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {157}, - pages = {120085}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120085}, - urldate = {2020-05-08}, - abstract = {Forming strategic partnerships, particularly university partnerships, is among the important aspects of compa-nies' innovation strategies that shape their innovation performance. While research has uncovered many macro-level attributes of such partnerships, the micro-level, including the human side, of these inter-organizational relationships is only partly understood. We especially lack an understanding of how individual, manager-level characteristics facilitate company collaboration with partners such as universities. Applying a micro-founda-tional lens and building on 10 qualitative case studies, we identify how companies' human capital helps overcome barriers and enhance the drivers of university-industry collaboration. We propose a two-dimensional framework consisting of companies' human capital components and their managerial roles for university partnerships -attitudinal, relational, and cognitive-to guide future research on human capital in the context of university-industry strategic partnerships. The framework will also assist managers and recruiters in better understanding the role of human capital in their collaborations with universities.}, - keywords = {Human capital,Innovation,Micro-foundations,Strategic partnership,University-industry collaboration,University-industry partnership}, - file = {/Users/fabio/Zotero/storage/W4QGF4CG/full-text.pdf} -} - -@article{Albert2019, - title = {Sustainable Frugal Innovation - {{The}} Connection between Frugal Innovation and Sustainability}, - author = {Albert, Martin}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117747}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117747}, - urldate = {2020-05-21}, - abstract = {Frugal innovation is often associated with (ecological and social) sustainability because it is characterized by minimizing the use of resources (raw material, production resources, energy, fuel, water, waste, financial resources), it is more affordable, and better accessible than conventional innovations. My paper contributes a comprehensive literature overview on the connection between frugal innovation and sustainability. I address the used definitions of frugal innovation and sustainability, and outline the potentials and threats of frugal innovation for sustainability. My research approach is a two-step procedure, consisting of a literature review according to Cooper (focusing on the steps of data collection and data evaluation) and a qualitative content analysis according to Mayring. For data collection and data evaluation, I searched various databases with selected keywords. The 14 identified texts were analyzed with a qualitative content analysis in the type of inductive category development. All texts examined describe a positive connection between frugal innovation and sustainability and/or potentials of frugal innovation for sustainability. Just under half of the authors outline negative connections between frugal innovation and sustainability and/or threats of frugal innovation for sustainability. Based on the results it can be noted, that frugal innovation is inherently socially and economically sustainable. In view of the empirical negations of the inherence of ecological sustainability in frugal innovation, I recommend the use of the term ``ecological sustainable frugal innovation'' for frugal innovation with a positive connection to ecological sustainability. Research implications and issues for future research relating to ecological sustainable frugal innovation, like voluntary simplicity, degrowth, (alternative to) planned obsolescence, and circular economy are presented.}, - keywords = {Connection,Frugal innovation,Literature review,Potentials,Qualitative content analysis,Sustainability,Threats} -} - -@inproceedings{Albuquerque2018, - title = {Modelling, {{Printing}} and {{Validation}} of {{Dental Dry Models}} for {{Implantology Skills Training}}}, - booktitle = {2018 {{IEEE International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}}/{{ITMC}})}, - author = {Albuquerque, Ramses and Arbelaez, Giovanny and Cruz, Fabio and Camargo, Mauricio and Joseph, David and Tran, Nguyen}, - year = {2018}, month = jun, - pages = {1--8}, + pages = {1--10}, publisher = {{IEEE}}, - doi = {10.1109/ICE.2018.8436302}, - copyright = {All rights reserved}, - isbn = {978-1-5386-1469-3}, - keywords = {3D printing,additive manufacturing,Dry model,Surgical training}, - file = {/Users/fabio/Zotero/storage/DHZK3CPE/Modelling, Printing and Validation of Dental Dry Models for Implantology Skills Training.pdf} -} - -@article{alcanizClosingClimateInequality2021, - title = {Closing the {{Climate Inequality Gap}}}, - author = {Alca{\~n}iz, Isabella and Hubacek, Klaus}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {292}, - pages = {126076}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126076}, - urldate = {2021-02-14} -} - -@article{Alcayaga2019, - title = {Towards a Framework of Smart-Circular Systems: {{An}} Integrative Literature Review}, - author = {Alcayaga, Andres and Wiener, Melanie and Hansen, Erik G.}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {221}, - pages = {622--634}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.085}, - file = {/Users/fabio/Zotero/storage/BCX7GS5C/Towards a framework of smart-circular systems- An integrative literature review.pdf} -} - -@article{aldieriClimateChangeKnowledge2020, - title = {Climate Change and {{Knowledge Spillovers}} for {{Cleaner Production}}: {{New}} Insights}, - author = {Aldieri, Luigi and Vinci, Concetto Paolo}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - pages = {122729}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122729}, - urldate = {2020-06-22} -} - -@article{alexanderDegrowthEnergyDescent2018, - title = {Degrowth, Energy Descent, and `Low-Tech' Living: {{Potential}} Pathways for Increased Resilience in Times of Crisis}, - shorttitle = {Degrowth, Energy Descent, and `Low-Tech' Living}, - author = {Alexander, Samuel and Yacoumis, Paul}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - series = {Technology and {{Degrowth}}}, - volume = {197}, - pages = {1840--1848}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2016.09.100}, - urldate = {2022-10-11}, - abstract = {The use or misuse of advanced technology is a key factor driving global environmental degradation, but advanced technology is also widely assumed to be the solution to many environmental problems. In contrast to that dominant approach, this paper outlines a variety of what the authors call `low-tech' options \textendash{} such as solar shower bags, washing lines, alternative heating and cooling methods, and cycling \textendash{} and raises questions about the extent to which these types of `simple living' practices could help increase household resilience in conditions of economic disruption, instability, or crisis. The analysis is framed by an `energy descent' scenario, in which an individual, household or community either chooses a reduced-energy way of life, motivated by climate change mitigation, or has such a way of life imposed upon them due to declining fossil fuel availability or economic disruption. The authors see such a future as plausible \textendash{} and in some contexts has already arrived or has always been the case \textendash{} hence the relevance of this analysis, which has both quantitative and qualitative dimensions. Furthermore, while the focus herein is on low-tech living at the household level, it is argued that prefiguring a `simpler way' to live has deeper significance too, in that it could help create the cultural conditions needed for a politics and macroeconomics of degrowth to emerge, which the authors maintain is a necessary part of any decarbonisation project. Challenges facing low-tech options are also acknowledged, including the ever-present risk of rebound effects and other indirect impacts.}, - langid = {english}, - keywords = {Appropriate technology,Degrowth,Energy descent,Low-tech,Resilience,Techno-optimism}, - file = {/Users/fabio/Zotero/storage/D9YJA4IX/Alexander y Yacoumis - 2018 - Degrowth, energy descent, and ‘low-tech’ living P.pdf;/Users/fabio/Zotero/storage/2GZUL32Y/S095965261631441X.html} -} - -@article{Alexy2013, - title = {From Closed to Open: {{Job}} Role Changes, Individual Predispositions, and the Adoption of Commercial Open Source Software Development}, - author = {Alexy, Oliver and Henkel, Joachim and Wallin, Martin W.}, - year = {2013}, - journal = {Research Policy}, - volume = {42}, - number = {8}, - pages = {1325--1340}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2013.04.007}, - abstract = {When trying to attain the benefits of open source software (OSS), proprietary closed source software (PCSS) firms are struggling to adopt this radically different practice of software development. We approach these adoption challenges as a problem of gaining support for organizational innovation. Through a mixed-method research design consisting of qualitative interviews and a survey of employees of a large telecommunications firm, we find that the organizational innovation to commercially engage in OSS has different impacts on technical and administrative dimensions of different job roles. Accordingly, individuals enacting different job roles are - on average - more or less well aligned with the OSS practice and OSS processes per se. We find that individual-level attributes can counterbalance the job role changes that weaken support for adopting OSS, while perceived organizational commitment has no effect. Suggestions for PCSS firms are presented and implications for innovation literature are discussed. \textcopyright{} 2013 Elsevier B.V. All rights reserved.}, - keywords = {Open innovation R\&D,Open source software,Organizational change,Organizational innovation}, - file = {/Users/fabio/Zotero/storage/JKVXYKAN/From closed to open Job role changes, individual predispositions, and the adoption of commercial open source software development.pdf} -} - -@book{Alfaro2018, - title = {The {{Urban Book Series Emerging Urban Spaces}}: {{A Planetary Perspective}}}, - author = {Alfaro, Paola}, - year = {2018}, - isbn = {978-3-319-57815-6}, - file = {/Users/fabio/Zotero/storage/ZUP8MS5X/(The Urban Book Series) Philipp Horn, Paola Alfaro d’Alençon, Ana Claudia Duarte Cardoso (eds.) - Emerging Urban Spaces_ A Planetary Perspective-Springer International Publishing (2018).pdf} -} - -@article{alhassanEffectsDigitalInclusion2021, - title = {The Effects of Digital Inclusion and {{ICT}} Access on the Quality of Life: {{A}} Global Perspective}, - author = {Alhassan, Muftawu Dzang and Adam, Ibrahim Osman}, - year = {2021}, - month = feb, - journal = {Technology in Society}, - volume = {64}, - pages = {101511}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101511}, - urldate = {2021-01-12} -} - -@article{alhusenNewMeasurementConception2021, - title = {A {{New Measurement Conception}} for the `{{Doing-Using-Interacting}}' {{Mode}} of {{Innovation}}}, - author = {Alhusen, Harm and Bennat, Tatjana and Bizer, Kilian and Cantner, Uwe and Horstmann, Elaine and Kalthaus, Martin and Proeger, Till and Sternberg, Rolf and T{\"o}pfer, Stefan}, - year = {2021}, - month = may, - journal = {Research Policy}, - volume = {50}, - number = {4}, - pages = {104214}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104214}, - urldate = {2021-02-28}, - file = {/Users/fabio/Zotero/storage/KD363L4T/full-text.pdf} + doi = {10.1109/ICE/ITMC49519.2020.9198320}, + isbn = {978-1-72817-037-4}, + keywords = {Distributed recycling,Green fablab,Innovatio labs,Strategic intent}, + file = {/Users/fabio/Zotero/storage/8RAMMDFR/PID6461065.pdf} } -@article{Ali2019, - title = {{{4D}} Printing: A Critical Review of Current Developments, and Future Prospects}, - author = {Ali, Md. Hazrat and Abilgaziyev, Anuar and Adair, Desmond}, - year = {2019}, - month = aug, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {25}, +@article{Rowley2004, + title = {Conducting a {{Literature Review}}}, + author = {Rowley, Jennifer and Stack, Frances}, + year = {2004}, + journal = {Management Research News}, + volume = {27}, number = {6}, - pages = {1108--1126}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {0268-3768}, - doi = {10.1007/s00170-019-04258-0}, - keywords = {4d printing,4D printing,additive manufacturing,Additive manufacturing,optimization,Optimization,polymer materials,Polymer materials}, - file = {/Users/fabio/Zotero/storage/9MJIPMWZ/4D printing a critical review of current developments, and future prospects.pdf} -} - -@article{aliMatrixTraysWaste2021, - title = {Matrix {{Trays}}: {{From}} Waste to Opportunities}, - author = {Ali, Ahmed K. and Layton, Astrid and Kio, Patricia and Williams, Jewel}, - year = {2021}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {300}, - pages = {126813}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126813}, - urldate = {2021-04-29}, - abstract = {Matrix Trays are single-use plastic carriers used to transport integrated chips and circuit board components during automated test and assembly processes for Printed Circuit Boards. These trays represent a significant yet consistent waste stream; primarily in the electronics industry and many other industries that integrate microchips into their products especially the automotive industry. By the end of 2017, the National Sword Policy which was implemented by China on plastic waste import from other countries and especially the United States catalyzed a huge crisis and forced manufacturers and companies to deal with their own plastic waste streams. This study presents two alternative approaches of reusing trays to the reduced conventional recycling practices which have caused used trays to remain in storage or be deposited in landfills. Approaches including a students' design competition and a proof of concept case study for an autonomous shading device are presented. The shading device was designed, tested and validated. Trays were transformed from waste into 13 possible products showing that a circular economy and industrial symbiosis can be achieved by integrating multidisciplinary reuse approaches for by-product reuse and sustainable industry practices. Environmental and economic impacts were evaluated comparing reuse to recycling, combustion and landfilling. The results showed that reusing trays reduces energy consumption and greenhouse gas emissions.}, - keywords = {Circular economy,Creative reuse,Matrix trays,Multidisciplinary design,Plastic reuse,Single-use plastics} -} - -@article{aliPlasticWastesBiodegradation2021, - title = {Plastic Wastes Biodegradation: {{Mechanisms}}, Challenges and Future Prospects}, - shorttitle = {Plastic Wastes Biodegradation}, - author = {Ali, Sameh S. and Elsamahy, Tamer and {Al-Tohamy}, Rania and Zhu, Daochen and Mahmoud, Yehia A. -G. and Koutra, Eleni and Metwally, Metwally A. and Kornaros, Michael and Sun, Jianzhong}, - year = {2021}, - month = aug, - journal = {Science of The Total Environment}, - volume = {780}, - pages = {146590}, - issn = {0048-9697}, - doi = {10.1016/j.scitotenv.2021.146590}, - urldate = {2023-08-31}, - abstract = {The growing accumulation of plastic wastes is one of the main environmental challenges currently faced by modern societies. These wastes are considered a serious global problem because of their effects on all forms of life. There is thus an urgent need to demonstrate effective eco-environmental techniques to overcome the hazardous environmental impacts of traditional disposal paths. However, our current knowledge on the prevailing mechanisms and the efficacy of synthetic plastics' biodegradation still appears limited. Under this scope, our review aims to comprehensively highlight the role of microbes, with special emphasis on algae, on the entire plastic biodegradation process focusing on the depolarization of various synthetic plastic types. Moreover, our review emphasizes on the ability of insects' gut microbial consortium to degrade synthetic plastic wastes. In this view, we discuss the schematic pathway of the biodegradation process of six types of synthetic plastics. These findings may contribute to establishing bio-upcycling processes of plastic wastes towards biosynthesis of valuable metabolic products. Finally, we discuss the challenges and opportunities for microbial valorization of degraded plastic wastes.}, - keywords = {Bacteria,Fungi,Insects,Microalgae,Microbial valorization,Synthetic plastics}, - file = {/Users/fabio/Zotero/storage/MBGKNN3N/Ali et al_2021_Plastic wastes biodegradation.pdf;/Users/fabio/Zotero/storage/U8VT6Z63/S0048969721016582.html} -} - -@article{Aljuneidi2020, - title = {Carbon Footprint for Designing Reverse Logistics Network with Hybrid Manufacturing-Remanufacturing Systems}, - author = {Aljuneidi, Tariq and Bulgak, Akif Asil}, - year = {2020}, - month = jul, - journal = {Journal of Remanufacturing}, - volume = {10}, - number = {2}, - pages = {107--126}, - issn = {2210-464X}, - doi = {10.1007/s13243-019-00076-5} -} - -@article{Alkadi2019, - title = {{{3D Printing}} of {{Ground Tire Rubber Composites}}}, - author = {Alkadi, Faez and Lee, Jeongwoo and Yeo, Jun-Seok and Hwang, Seok-Ho and Choi, Jae-Won}, - year = {2019}, - month = apr, - journal = {International Journal of Precision Engineering and Manufacturing-Green Technology}, - volume = {6}, - number = {2}, - pages = {211--222}, - publisher = {{Korean Society for Precision Engineering}}, - issn = {2288-6206}, - doi = {10.1007/s40684-019-00023-6}, - abstract = {Recycled tire rubber is an environmentally and economically beneficial material. Ground tire rubber (GTR) as a filler in a polymer matrix was used as an ink material (composite material) for material extrusion in a 3D printing process. The maximum allowable amount of GTR incorporated into the mixture without significantly altering the rheological behavior of the ink was set. Printability investigations revealed that pressure and speed show linear and power relationships, respectively, to the line width for three different amounts of GTR. Moreover, the post-curing time of 30 min at 115 \textdegree C was set as the full-cure condition to achieve polymerization of 80\% or more for the 3D printed parts. Unidirectional tensile testing demonstrated that 3D printed specimens exhibit no degradation in tensile strength when compared to molded specimens. Moreover, printability and mechanical properties of functionalized GTR were investigated to determine if this material exhibits enhanced mechanical strength. Unidirectional tensile tests show that the maximum tensile strength for specimens with functionalized GTR was 20\% higher than in specimens with non-functionalized GTR. In conclusion, 3D printing of GTR composites shows promise for using recycled GTR to create 3D structures with rubber-like properties. \textcopyright{} 2019, Korean Society for Precision Engineering.}, - isbn = {0123456789}, - keywords = {3D printing,Direct-print,Ground tire rubber,GTR surface modification,Recycled powder}, - file = {/Users/fabio/Zotero/storage/RMH4RPJN/3D Printing of Ground Tire Rubber Composites.pdf} -} - -@article{Alkhuzaim2020, - title = {Evaluating {{Emergy Analysis}} at the {{Nexus}} of {{Circular Economy}} and {{Sustainable Supply Chain Management}}}, - author = {Alkhuzaim, Lojain and Zhu, Qingyun and Sarkis, Joseph}, - year = {2020}, - month = nov, - journal = {Sustainable Production and Consumption}, - volume = {25}, - pages = {413--424}, - publisher = {{Elsevier BV}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.11.022}, - urldate = {2020-12-14}, - abstract = {Emergy analysis has been gaining attention in its use as an environmental accounting tool. Its relationships and implications to sustainable supply chains and the circular economy are still not well understood, even with initial investigations into the relationship. Emergy analysis can potentially provide additional profound opportunities to advancing these sustainability-oriented fields. Emergy analysis\textemdash as a basis for economic, social and environmental performance measurements\textemdash uses donor side valuation approaches. We discuss how sustainable supply chain management and circular economy performance measurement methods can be expanded and effectively utilize emergy analysis using a donor-side evaluation. We provide insights into more effective environmentally sustainable supply chain and circularity performance evaluation, accounting, and appraisal using emergy based performance measurements. Our findings show that there is ample room for further application and theoretical development at the nexus of these topics. Practically, the measures and approaches for emergy analysis can help decision makers in organizations and across supply chains in managing material sourcing, supplier selection, and network and circular economy flow designs. A theoretical synthesis and research gaps are introduced to help guide future theoretical developments and practical investigations. This work is valuable for those seeking to advance research on sustainability and performance analysis for organizational and supply chain levels of analysis.}, - file = {/Users/fabio/Zotero/storage/TRQFZGTD/full-text.pdf} -} - -@article{Allahverdi2001, - title = {Processing of Advanced Electroceramic Components by Fused Deposition Technique}, - author = {Allahverdi, M and Danforth, S.C and Jafari, M and Safari, A}, - year = {2001}, - month = jan, - journal = {Journal of the European Ceramic Society}, - volume = {21}, - number = {10-11}, - pages = {1485--1490}, - issn = {09552219}, - doi = {10.1016/S0955-2219(01)00047-4}, - urldate = {2015-03-17}, - keywords = {1,actuators,and multimaterials,freeform fabrication,fused deposition of ceramics,layered manufacturing or solid,piezoelectric properties,prototyping techniques,rapid prototyping,refers to various rapid,sensors,sff,shaping}, - file = {/Users/fabio/Zotero/storage/P49852ZL/Allahverdi et al. - 2001 - Processing of advanced electroceramic components by fused deposition technique.pdf} -} - -@article{Allen1983, - title = {Collective Invention}, - author = {Allen, Robert C.}, - year = {1983}, - journal = {Journal of Economic Behavior \& Organization}, - volume = {4}, - number = {1}, - pages = {1--24}, - urldate = {2013-10-07}, - abstract = {This paper argues that many new production techniques have been developed by a process called `collective invention'. When firms collectively invent, they make available to their competitors the results of new plant designs so that their competitors can incorporate extensions of those designs into new facilities they build. The paper analyses the implications of this behavior for the rate and bias of technical change and discusses reasons why this behavior might occur.} -} - -@article{Allen2015, - title = {An Experimental Demonstration of Effective {{Curved Layer Fused Filament Fabrication}} Utilising a Parallel Deposition Robot}, - author = {Allen, Robert J A and Trask, Richard S.}, - year = {2015}, - journal = {Additive Manufacturing}, - volume = {8}, - pages = {78--87}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2015.09.001}, - abstract = {Fused Filament Fabrication (FFF) is an additive manufacturing (AM) method that relies on the thermal extrusion of a thermoplastic feedstock from a mobile deposition head. Conventional FFF constructs components from stacks of individual extruded layers using tool paths with fixed z-values in each individual layer. Consequently, the manufactured components often contain inherent weaknesses in the z-axis due to the relatively weak thermal fusion bonding that occurs between individual layers, as well as poor surface finish in shallow sloped contours. This study demonstrates the use of Curved Layer FFF (CLFFF) tool paths in tandem with a commercially available parallel, or delta, style FFF system to allow the deposition head to follow the topology of the component. By incorporating a delta robot and CLFFF tool paths in this way, improvements in the surface finish of the manufactured parts has been observed, and time costs associated with Cartesian robot based CLFFF manufacturing have been notably reduced. Furthermore, employing a delta robot provides additional flexibility to CLFFF manufacturing and increases the feasibility of its application for advanced manufacturing. The study has also demonstrated a viable approach to multi-material FFF by decoupling support structure and part manufacture into regions of CLFFF and static z tool pathing in an appropriate fashion.}, - isbn = {22148604 (ISSN)}, - keywords = {Additive manufacturing,Curved layer,Fused Deposition Modelling,Multi-material,Rapid prototyping}, - file = {/Users/fabio/Zotero/storage/5QDXPA3C/An experimental demonstration of effective Curved Layer Fused Filament Fabrication utilising a parallel deposition robot (2015).pdf} -} - -@techreport{AllModelsAre, - title = {All Models Are Wrong}, - file = {/Users/fabio/Zotero/storage/AS6Z4KE6/All models are wrong.pdf} -} - -@article{allwoodMaterialEfficiencyWhite2011, - title = {Material Efficiency: {{A}} White Paper}, - author = {Allwood, Julian M. and Ashby, Michael F. and Gutowski, Timothy G. and Worrell, Ernst}, - year = {2011}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {55}, - number = {3}, - pages = {362--381}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2010.11.002}, - urldate = {2022-03-13}, - abstract = {For most materials used to provide buildings, infrastructure, equipment and products, global stocks are still sufficient to meet anticipated demand, but the environmental impacts of materials production and processing, particularly those related to energy, are rapidly becoming critical. These impacts can be ameliorated to some extent by the ongoing pursuit of efficiencies within existing processes, but demand is anticipated to double in the next 40 years, and this will lead to an unacceptable increase in overall impacts unless the total requirement for material production and processing is reduced. This is the goal of material efficiency, and this paper aims to stimulate interest in the area. Four major strategies for reducing material demand through material efficiency are discussed: longer-lasting products; modularisation and remanufacturing; component re-use; designing products with less material. In industrialised nations, these strategies have had little attention, because of economic, regulatory and social barriers, which are each examined. However, evidence from waste management and the pursuit of energy efficiency suggests that these barriers might be overcome, and an outline of potential mechanisms for change is given. In bringing together insights into material efficiency from a wide range of disciplines, the paper presents a set of 20 open questions for future work. \textcopyright{} 2010 Elsevier B.V.}, - keywords = {Life-extension,Light-weighting,Material efficiency,Re-use,Remanufacturing} -} - -@article{almeidaPackagingEnvironmentalImpact2021, - title = {Packaging Environmental Impact on Seafood Supply Chains: {{A}} Review of Life Cycle Assessment Studies}, - author = {Almeida, Cheila and Loubet, Philippe and {da Costa}, Tam{\'i}ris Pacheco and Quinteiro, Paula and Laso, Jara and {Baptista de Sousa}, David and Cooney, Ronan and Mellett, Sinead and Sonnemann, Guido and Rodr{\'i}guez, Carlos Jos{\'e} and Rowan, Neil and Clifford, Eoghan and {Ruiz-Salm{\'o}n}, Israel and Margallo, Mar{\'i}a and Aldaco, Rub{\'e}n and Nunes, Maria Leonor and Dias, Ana Cl{\'a}udia and Marques, Ant{\'o}nio}, - year = {2021}, - journal = {Journal of Industrial Ecology}, - pages = {1--18}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13189}, - urldate = {2022-01-25}, - abstract = {Packaging is fundamental for food preservation and transportation but generates an environmental burden from its production and end-of-life management. This review evaluates packaging contribution to the environmental performance of seafood products. Life cycle assessment (LCA) studies were evaluated by both qualitative and quantitative analysis. The qualitative analysis assessed how direct (e.g., packaging material) and indirect impacts (e.g., influence on seafood loss and waste) have been considered, while the quantitative analysis evaluated packaging contribution to products' weight and climate change impact. Qualitative analysis revealed that seafood LCAs focus mainly on direct environmental impacts arising from packaging materials, for which some articles conducted sensitivity analysis to assess materials substitution. Recycling was found to be the most common recommendation to diminish direct potential environmental impacts arising from packaging end-of-life. However, standardized recovery rates and other end-of-life options (e.g., reuse), should be considered. Quantitative analysis revealed that cans' production contributes significantly to the overall climate change impact for canned products. On average, it contributes to 42\% of a product's climate change impact and 27\% of a product's weight. Packaging has a lower contribution when considering freezing, chilling, and other post-harvesting processing. It represents on average less than 5\% of a product's climate change impact (less than 1~kg CO2 eq/kg) and 6\% of a product's weight. Packaging material production is more relevant to aluminum, tinplate, and glass than for plastic and paper. Therefore, it is essential to accurately include these materials and their associated processes in inventories to improve the environmental assessment of seafood products.}, - keywords = {canning,fish,food packaging,industrial ecology,life cycle assessment,plastic}, - file = {/Users/fabio/Zotero/storage/PKLFFQEN/full-text.pdf} -} - -@article{Almirall2008e, - title = {Living {{Labs}} and Open Innovation: Roles and Applicability}, - author = {Almirall, Esteve and Wareham, Jonathan}, - year = {2008}, - journal = {The Electronic Journal for Virtual Organizations and Networks}, - volume = {10}, - number = {3}, - pages = {21--46} -} - -@article{almirallMappingLivingLabs2012, - title = {Mapping {{Living Labs}} in the {{Landscape}} of {{Innovation Methodologies}}}, - author = {Almirall, Esteve and Lee, Melissa and Wareham, Jonathan}, - year = {2012}, - month = sep, - journal = {Technology Innovation Management Review}, - volume = {2}, - number = {9}, - pages = {12--18}, - publisher = {{Carleton University}}, - doi = {10.22215/timreview603}, - urldate = {2021-06-10}, - abstract = {A growing interest in living labs as a mechanism for innovation has drawn significant attention to both the different flavours of this methodology and to the organizations that put it into practice. However, little has been done to assess its impact and to compare its contribution to other innovation methodologies. This article aims to cover that gap by summarizing the most common European living labs approaches and positioning them in the landscape of user-contributed innovation methodology. The merits and appropriateness of living labs in these settings are also assessed.}, - file = {/Users/fabio/Zotero/storage/3H6JUVV3/full-text.pdf} -} - -@article{AlSalem2009, - title = {Recycling and Recovery Routes of Plastic Solid Waste ({{PSW}}): {{A}} Review}, - author = {{Al-Salem}, S.M. and Lettieri, P and Baeyens, J}, - year = {2009}, - month = oct, - journal = {Waste Management}, - volume = {29}, - number = {10}, - eprint = {19577459}, - eprinttype = {pubmed}, - pages = {2625--2643}, - publisher = {{Elsevier Ltd}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2009.06.004}, - urldate = {2014-05-23}, - abstract = {Plastic solid waste (PSW) presents challenges and opportunities to societies regardless of their sustainability awareness and technological advances. In this paper, recent progress in the recycling and recovery of PSW is reviewed. A special emphasis is paid on waste generated from polyolefinic sources, which makes up a great percentage of our daily single-life cycle plastic products. The four routes of PSW treatment are detailed and discussed covering primary (re-extrusion), secondary (mechanical), tertiary (chemical) and quaternary (energy recovery) schemes and technologies. Primary recycling, which involves the re-introduction of clean scrap of single polymer to the extrusion cycle in order to produce products of the similar material, is commonly applied in the processing line itself but rarely applied among recyclers, as recycling materials rarely possess the required quality. The various waste products, consisting of either end-of-life or production (scrap) waste, are the feedstock of secondary techniques, thereby generally reduced in size to a more desirable shape and form, such as pellets, flakes or powders, depending on the source, shape and usability. Tertiary treatment schemes have contributed greatly to the recycling status of PSW in recent years. Advanced thermo-chemical treatment methods cover a wide range of technologies and produce either fuels or petrochemical feedstock. Nowadays, non-catalytic thermal cracking (thermolysis) is receiving renewed attention, due to the fact of added value on a crude oil barrel and its very valuable yielded products. But a fact remains that advanced thermo-chemical recycling of PSW (namely polyolefins) still lacks the proper design and kinetic background to target certain desired products and/or chemicals. Energy recovery was found to be an attainable solution to PSW in general and municipal solid waste (MSW) in particular. The amount of energy produced in kilns and reactors applied in this route is sufficiently investigated up to the point of operation, but not in terms of integration with either petrochemical or converting plants. Although primary and secondary recycling schemes are well established and widely applied, it is concluded that many of the PSW tertiary and quaternary treatment schemes appear to be robust and worthy of additional investigation.}, - pmid = {19577459}, - keywords = {Conservation of Natural Resources,Conservation of Natural Resources: methods,Plastics,Refuse Disposal,Refuse Disposal: methods,Waste Products,Waste Products: statistics \& numerical data}, - file = {/Users/fabio/Zotero/storage/MSBJ4VFI/Recycling and recovery routes of plastic solid waste (PSW) A review.pdf} -} - -@article{Altan2018, - title = {Effects of Process Parameters on the Quality of {{PLA}} Products Fabricated by Fused Deposition Modeling ({{FDM}}): {{Surface}} Roughness and Tensile Strength}, - author = {Altan, Mirigul and Eryildiz, Meltem and Gumus, Beril and Kahraman, Yusuf}, - year = {2018}, - month = may, - journal = {Materialpruefung/Materials Testing}, - volume = {60}, - number = {5}, - pages = {471--477}, - publisher = {{Carl Hanser Verlag}}, - issn = {00255300}, - doi = {10.3139/120.111178}, - urldate = {2021-01-15}, - abstract = {This study investigates the effects of process parameters on the quality of products fabricated by fused deposition modeling (FDM), such as surface roughness and tensile strength. Polylactic acid (PLA) samples were built on a FDM machine at various layer thicknesses, nozzle temperature and deposition head velocity. The effect of cooling the samples during the process was also considered. The experimental study was performed according to a mixed type Taguchi L16 orthogonal array. The effectiveness of each parameter was also discussed by an analysis of variance (ANOVA). The tensile strength results were compatible with the optical images of the fracture surfaces while the surface roughness results were compatible with the surface topography of the parts along the thickness. The two dominant quality characteristics were found to be layer thickness and deposition head velocity. Lower layer thickness values yielded higher tensile strength and lower surface roughness. Use of a cooling fan and nozzle temperature were found to be the least effective parameters. Finally, the results indicated that tensile strength and surface quality of the FDM samples improved about 25 \%, and 12 \%, respectively at optimal process conditions.}, - keywords = {Fused deposition modeling,Part quality,Process parameter optimization,Surface roughness,Tensile strength} -} - -@article{alyaseriHandlingUncertaintiesInherited2019, - title = {Handling Uncertainties Inherited in Life Cycle Inventory and Life Cycle Impact Assessment Method for Improved Life Cycle Assessment of Wastewater Sludge Treatment}, - author = {Alyaseri, Isam and Zhou, Jianpeng}, - year = {2019}, - month = nov, - journal = {Heliyon}, - volume = {5}, - number = {11}, - publisher = {{Elsevier Ltd}}, - issn = {24058440}, - doi = {10.1016/j.heliyon.2019.e02793}, - urldate = {2021-05-31}, - abstract = {Engineering; Civil engineering; Environmental science; Environmental assessment; Environmental engineering; Environmental impact assessment; Uncertainty; Wastewater sludge treatment; LCA; Life cycle impact assessment method; Data inventory}, - keywords = {Civil engineering,Data inventory,Engineering,Environmental assessment,Environmental engineering,Environmental impact assessment,Environmental science,LCA,Life cycle impact assessment method,Uncertainty,Wastewater sludge treatment}, - file = {/Users/fabio/Zotero/storage/RTLJX79I/full-text.pdf} -} - -@article{Alzerreca2015, - title = {Mechanical Properties and Molecular Structures of Virgin and Recycled {{HDPE}} Polymers Used in Gravity Sewer Systems}, - author = {Alzerreca, Mathias and Paris, Michael and Boyron, Olivier and Orditz, Dominique and Louarn, Guy and Correc, Olivier}, - year = {2015}, - journal = {Polymer Testing}, - volume = {46}, - pages = {1--8}, - publisher = {{Elsevier Ltd}}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2015.06.012}, - abstract = {The widespread use of plastics in the conditioning, packaging and building material sectors generates an enormous amount of industrial waste which could be recycled for wastewater pipes and fittings. Nevertheless, current manufacturing standards in the piping industry recommend against the use of post-consumer recycled materials - a policy based on inadequate understanding of the properties and long-term mechanical performance of recycled materials. The present study compared the material characteristics of virgin and recycled high-density polyethylene (HDPE) plastics commonly found in the piping industry. Mechanical testing, oxidative induction time (OIT), melt flow index (MFI) and thermal analysis were used in conjunction with X-ray fluorescence (??-XRF), size exclusion chromatography and \textsuperscript{13}C solid-state NMR to evaluate mechanical behavior and molecular structure as well as contaminant or filler contents. This study provides evidence for the degradation processes impact that can occur when post-industrial and post-consumer polymers are recycled. However, the study identified two measures to improve the material qualities of post-consumer recycled HDPE: 1) reducing the amount of contaminants or, alternatively, improving their compatibility with HDPE resins, and 2) improving current sorting and recycling processes to increase the amount of tie molecules in HDPE materials.}, - keywords = {Creep,Fatigue,GPC,Lifetime,Pipe,Polyethylene,Post-consumer,Solid-state NMR}, - file = {/Users/fabio/Zotero/storage/P4STZXZM/Alzerreca et al. - 2015 - Mechanical properties and molecular structures of virgin and recycled HDPE polymers used in gravity sewer syst.pdf} -} - -@article{Amabile1988, - title = {A {{Model}} of {{Creativity}} and {{Innovation}} in {{Organizations}}}, - author = {Amabile, Teresa M}, - year = {1988}, - journal = {Research in Organizational Behavior}, - volume = {10}, - pages = {123}, - issn = {01913085}, - doi = {Article}, - abstract = {Presents a study which examined the factors influencing creativity and innovation in organizations. Integration of a model of individual creativity into a preliminary model of organizational innovation; Criteria for models of organizational innovation; Discussion of the model's limitation and implications for practice.}, - arxiv = {http://ehis.ebscohost.com/}, - isbn = {0892327480}, - pmid = {6815425}, - keywords = {CREATIVE ability,ORGANIZATIONAL behavior,ORGANIZATIONAL change} -} - -@article{Amabile1996, - title = {{{ASSESSING THE WORK ENVIRONMENT FOR CREATIVITY}}.}, - author = {AMABILE, T. M. and CONTI, R. and COON, H. and LAZENBY, J. and HERRON, M.}, - year = {1996}, - month = oct, - journal = {Academy of Management Journal}, - volume = {39}, - number = {5}, - pages = {1154--1184}, - issn = {0001-4273}, - doi = {10.2307/256995}, - abstract = {We describe the development and validation of a new instrument, KEYS: Assessing the Climate for Creativity, designed to assess perceived stimulants and obstacles to creativity in organizational work environments. The KEYS scales have acceptable factor structures, internal consistencies, test-retest reliabilities, and preliminary convergent and discriminant validity. A construct validity study shows that perceived work environments, as assessed by the KEYS scales, discriminate between high-creativity projects and low-creativity projects; certain scales discriminate more strongly and consistently than others. We discuss the utility of this tool for research and practice.}, - isbn = {00014273}, - pmid = {3633971} -} - -@article{amadeiModelingEUPlastic2022, - title = {Modeling the {{EU}} Plastic Footprint: {{Exploring}} Data Sources and Littering Potential}, - author = {Amadei, Andrea Martino and {Sany{\'e}-Mengual}, Esther and Sala, Serenella}, - year = {2022}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {178}, - pages = {106086}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106086}, - urldate = {2021-12-10} -} - -@article{amadeiRevisitingPositivePeace2020, - title = {Revisiting Positive Peace Using Systems Tools}, - author = {Amadei, Bernard}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120149}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120149}, - urldate = {2020-06-18}, - abstract = {This paper looks at peace with an integrated perspective. As a state, peace cannot be measured directly and requires the use of proxies and indicators. This paper revisits the positive peace index (PPI) introduced by the Institute for Economy and Peace (IEP) through the lens of systems thinking and modeling. Three sets of systems tools (cross-impact analysis, network analysis, and system dynamics) are proposed to explicitly account for the different levels of influence and dependence among the eight domains used to determine the PPI at the country level. Although more comprehensive than the original IEP formulation, the integrated approach proposed herein requires decisionmakers to be systems thinkers and able to conduct a detailed analysis of how the eight domains influence (impact) or depend on (sensitive to) each other. The proposed approach allows decisionmakers to capture the multidimensional and cross-disciplinary nature of positive peace better. This paper also shows that the three components of peace (positive, negative, and cultural) initially proposed by Johan Galtung can be represented using three-dimensional geometric features.}, - keywords = {Complex systems,Cross-impact analysis,Network analysis,Peace geometry,Positive peace,System dynamics,Systems thinking} -} - -@article{amendPotentialModularProduct2022, - title = {The Potential of Modular Product Design on Repair Behavior and User Experience \textendash{} {{Evidence}} from the Smartphone Industry}, - author = {Amend, Clara and Revellio, Ferdinand and Tenner, Isabell and Schaltegger, Stefan}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {367}, - pages = {132770}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.132770}, - urldate = {2022-08-05}, - abstract = {Innovation through modular product design is a promising strategy for product lifetime extension and material recyclability. Yet, sustainability benefits of the design do not automatically come into effect, but require additional process innovation through service activities that have to be attractive and made use of by users. This study investigates to what extent sustainability-focused modular product design in the smartphone sector promotes (1) self-repair versus use of repair service and (2) a positive user experience with repair instructions and services. It further analyzes how circular economy attitudes and perceived self-repairability moderate these effects. The quantitative analysis finds that, strengthened by higher perceived self-repairability, users of modular smartphones are more likely to use repair instructions. Also, modular smartphone design increases positive experience with repair instructions. Consequently, successful implementation and management of complementary product and service innovation are key to promoting product lifetime extension in the smartphone industry.}, - langid = {english}, - keywords = {Circular economy,Lifetime extension,Repair service,Smartphones,Sustainability-oriented innovation,Sustainable modular product design}, - file = {/Users/fabio/Zotero/storage/R4FUN6MJ/Amend et al_2022_The potential of modular product design on repair behavior and user experience.pdf;/Users/fabio/Zotero/storage/KUX29BP4/S095965262202368X.html} -} - -@article{An2022, - title = {Estimated Material Metabolism and Life Cycle Greenhouse Gas Emission of Major Plastics in {{China}}: {{A}} Commercial Sector-Scale Perspective}, - author = {An, Jiahui and Wu, Fan and Wang, Dali and You, Jing}, - year = {2022}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {180}, - pages = {106161}, - publisher = {{Elsevier}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2022.106161}, - urldate = {2022-01-25}, - abstract = {Plastics are one of the most greenhouse gas (GHG) intensive and the fastest growing industries in the manufacturing sector. Environmental tradeoffs of plastics occur through all stages of their life cycles, accelerating climate breakdown and threatening our ability to maintain a sustainable climate. Herein, material flow analysis (MFA) of three major synthetic resins (PVC, PP, PE) in China was first conducted from production to end-of-life. Meanwhile, life cycle assessment (LCA) was applied to investigate ``cradle-to-gate'' environmental impacts of these synthetic resins, and then GHG emissions during each plastic life stage were quantified by the integrated LCA-MFA framework. Results suggested that GHG emissions during resin production were 5.42, 4.72 and 3.43 kg CO2eq for 1 kg PVC, PP and PE, respectively. Taken together, China generated 304 million metric tons (Mt) CO2eq in 2020 by synthetic resin production, and additional 44 and 55 Mt CO2eq were emitted due to further plastic product manufacturing and end-of-life management, respectively. Packaging was identified as the major GHG contributor during the use phase, which should be critically monitored for GHG management. The study provides a new perspective to reveal environmental hotspots that drive GHG emissions among plastic life cycles and guides policy-makers towards effective carbon control and sustainable plastic management.}, - keywords = {Commercial sector,Environmental hotspot,GHG control,Life cycle assessment,Material flow analysis,Synthetic resin} -} - -@article{Anandkumar2019, - title = {{{FDM}} Filaments with Unique Segmentation since Evolution: A Critical Review}, - author = {Anandkumar, R. and Babu, S. Ramesh}, - year = {2019}, - journal = {Progress in Additive Manufacturing}, - volume = {4}, - number = {2}, - pages = {185--193}, - publisher = {{Springer International Publishing}}, - issn = {2363-9512}, - doi = {10.1007/s40964-018-0069-8}, - isbn = {0123456789}, - keywords = {additive manufacturing,{Additive manufacturing,Fused deposition modeling (},analysis optimization,fdm,fdm filament,filament,filament review,fused deposition modeling}, - file = {/Users/fabio/Zotero/storage/6EU8YTA2/FDM filaments with unique segmentation since evolution a critical review.pdf} -} - -@article{Anastas2007, - title = {Design through the 12 Principles of Green Engineering}, - author = {Anastas, Paul T. and Zimmerman, Julie B.}, - year = {2007}, - journal = {IEEE Engineering Management Review}, - volume = {35}, - number = {3}, - pages = {16}, - issn = {03608581}, - doi = {10.1109/EMR.2007.4296421}, - abstract = {Sustainability requires objectives at the molecular, product, process, and system levels.}, - isbn = {0130619086}, - pmid = {12666905}, - file = {/Users/fabio/Zotero/storage/3XDTMYJZ/Design through the 12 principles of green engineering.pdf} -} - -@article{Andalib2019, - title = {Convergence of {{Conceptual Innovation Model}} to {{Reduce Challenges Faced}} by the {{Small}} and {{Medium Sized Enterprises}}' ({{SMEs}}) in {{Bangladesh}}}, - author = {Andalib, Tarnima Warda and Halim, Hasliza Abdul}, - year = {2019}, - month = aug, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {3}, - pages = {63}, - issn = {2199-8531}, - doi = {10.3390/joitmc5030063}, - abstract = {Small- and medium-sized enterprises (SMEs) in Bangladesh have been growing for the preceding two decades in various ways. Even though these enterprises exert an important effect on the national economy of the country, they face certain challenges and suffer in quite a manner. To reduce the suffering and help deal with these unavoidable challenges, SME foundations in Bangladesh have been working a lot to assist these enterprises. Usually, the challenges are financial, regulatory, or innovation performance-related. Since the enterprises are focused on particular products and their manifestation and production, performing innovatively within these organizations becomes quite a constraint factor. In this paper, a qualitative method was applied with soft systems, where an innovation model was commenced to reduce the challenges and constraints of SMEs in Bangladesh. From the literature, 50 articles were analyzed, a content and thematic analysis was done, and eight main challenges were highlighted and finalized. On the other hand, a focus group discussion among 10 entrepreneurs in Bangladesh was done, where collected data were stored in the NVIVOMac tool, transcribed, and coded, and 55 open codes were identified. These open codes were transferred to 20 axial codes and 8 themes to construct a conceptual innovation model for SMEs in Bangladesh by applying soft systems techniques to connect the themes to each other.} -} - -@article{Andersen2007, - title = {An Introductory Note on the Environmental Economics of the Circular Economy}, - author = {Andersen, Mikael Skou}, - year = {2007}, - journal = {Sustainability Science}, - volume = {2}, - number = {1}, - pages = {133--140}, - issn = {18624065}, - doi = {10.1007/s11625-006-0013-6}, - abstract = {This paper provides an introduction to some of the fundamental principles and approaches in environmental economics which are of significance to achieving an integrated sustainability science. The concept of a circular economy, introduced by the late David Pearce in 1990, addresses the interlinkages of the four economic functions of the environment. The environment not only provides amenity values, in addition to being a resource base and a sink for economic activities, it is also a fundamental life-support system. Environmental economists have suggested that, taking these four functions as an analytical starting point, unpriced or underpriced services should be internalised in the economy. In Europe significant advances have been achieved in the pricing of externalities by means of truly interdisciplinary analysis which accounts in detail for the environmental consequences. The monetary estimates reached as a result of such interdisciplinary research are gradually being applied to the economic analysis of environmental policy priorities. Although such figures provide only a partial and incomplete picture of the environmental costs at stake, they support and inform the analysis of the virtues of a circular economy for individual resources as well as for sustainability as a future trajectory.}, - isbn = {1862-4065}, - pmid = {10299492}, - keywords = {Circular economy,Environmental economics,Externalities,Sustainability}, - file = {/Users/fabio/Zotero/storage/B3EMBY2R/Andersen - 2007 - An introductory note on the environmental economics of the circular economy.pdf} -} - -@article{andersenStakeholderInclusionScenario2021, - title = {Stakeholder Inclusion in Scenario Planning\textemdash{{A}} Review of {{European}} Projects}, - author = {Andersen, Per Dannemand and Hansen, Meiken and Selin, Cynthia}, - year = {2021}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {169}, - pages = {120802}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120802}, - urldate = {2021-04-29} -} - -@book{Anderson2013, - title = {Regional Assessment of {{Africa}}}, - author = {Anderson, Pippin M.L. and Okereke, Chukwumerije and Rudd, Andrew and Parnell, Susan}, - year = {2013}, - journal = {Urbanization, Biodiversity and Ecosystem Services: Challenges and Opportunities: A Global Assessment}, - doi = {10.1007/978-94-007-7088-1_23}, - abstract = {Although there is large spatial variation in rates of change across the 55 nations of Africa, the combined impact of high natural population growth and rural-to-urban migration means that Africa is urbanizing faster than any other continent. At a growth rate of nearly 3.4 \% per annum, Africa's urban population is the fastest growing in the world. Currently nearly 40 \% of Africa's inhabitants live in cities (UN Habitat 2010), which is expected to more than double from 395 million people to 1 billion in 2040. In some cases, it is projected that city populations will swell by up to 85 \% in the next 15 years. The Nigerian city of Lagos, home to 8 million in 2000, is anticipated to exceed 16 million by 2015. Several other cities such as Abuja, Abidjan, Addis Ababa, Kano, Kinshasa, Luanda, Nairobi and, Ouagadougou are all expected to grow by more than one million by the end of this decade.}, - isbn = {978-94-007-7088-1}, - keywords = {Green economy,Rapid urbanization,Resources constraints,Small-town growth}, - file = {/Users/fabio/Zotero/storage/UF6KFC7S/2013_Book_UrbanizationBiodiversityAndEco.pdf} -} - -@article{Anderson2017, - title = {Mechanical {{Properties}} of {{Specimens 3D Printed}} with {{Virgin}} and {{Recycled Polylactic Acid}}}, - author = {Anderson, Isabelle}, - year = {2017}, - month = jun, - journal = {3D Printing and Additive Manufacturing}, - volume = {4}, - number = {2}, - pages = {110--115}, - issn = {2329-7662}, - doi = {10.1089/3dp.2016.0054}, - abstract = {With the 26\% annual growth rate of additive manufacturing, especially in the area of 3D polymer printing, the amount of waste is increasing at a rapid rate. Limited research in the area of recycling has been produced, yet there are several recycling machines being developed for home use. Despite this work there is no published mechanical data on components produced with filament recycled from 3D printed parts. There is very limited data on mechanical properties of any 3D printed materials. This article compares the properties of parts 3D printed with virgin polylactic acid (PLA) to those printed with recycled PLA. Using commercially available PLA and an entry level 3D printer, tensile and shear specimens were produced and then tested for tensile yield strength, modulus of elasticity, shear yield strength, and hardness. The specimens were then ground up and re-extruded into filament, and a second set of specimens were produced and tested using this recycled PLA filament. Mechanical testing showed that 3D printing with recycled PLA is a viable option. With the recycled filament, tensile strength decreased 10.9\%, shear strength increased 6.8\%, and hardness decreased 2.4\%. The tensile modulus of elasticity was statistically unchanged. Although the average mechanical properties before and after recycling were similar, there was more variability in the results of the recycled filament. Additionally, when printing with the recycled filament there was some nozzle clogging, while none occurred with the virgin filament. Overall, the mechanical properties of specimens 3D printed from recycled PLA filament were similar to virgin properties, encouraging further development in the area of recycling 3D printed filament.}, - keywords = {3d printing,additive manufacturing,mechanical properties,pla,recycling}, - file = {/Users/fabio/Zotero/storage/KYQ3HWJM/mechanical properties of specimens 3d printed with virgin and recycled polylactic acid.pdf} -} - -@article{anderssonMeasuringSocialecologicalDynamics2007, - title = {Measuring Social-Ecological Dynamics behind the Generation of Ecosystem Services}, - author = {Andersson, E. and Barthel, S. and Ahrn{\'e}, K.}, - year = {2007}, - month = jul, - journal = {Ecological Applications}, - volume = {17}, - number = {5}, - pages = {1267--1278}, - issn = {10510761}, - doi = {10.1890/06-1116.1}, - urldate = {2021-04-21}, - abstract = {The generation of ecosystem services depends on both social and ecological features. Here we focus on management, its ecological consequences, and social drivers. Our approach combined (1) quantitative surveys of local species diversity and abundance of three functional groups of ecosystem service providers (pollinators, seed dispersers, and insectivores) with (2) qualitative studies of local management practices connected to these services and their underlying social mechanisms, i.e., institutions, local ecological knowledge, and a sense of place. It focused on the ecology of three types of green areas (allotment gardens, cemeteries, and city parks) in the city of Stockholm, Sweden. These are superficially similar but differ considerably in their management. Effects of the different practices could be seen in the three functional groups, primarily as a higher abundance of pollinators in the informally managed allotment gardens and as differences in the composition of seed dispersers and insectivores. Thus, informal management, which is normally disregarded by planning authorities, is important for ecosystem services in the urban landscape. Furthermore, we suggest that informal management has an important secondary function: It may be crucial during periods of instability and change as it is argued to promote qualities with potential for adaptation. Allotment gardeners seem to be the most motivated managers, something that is reflected in their deeper knowledge and can be explained by a sense of place and management institutions. We propose that co-management would be one possible way to infuse the same positive qualities into all management and that improved information exchange between managers would be one further step toward ecologically functional urban landscapes. \textcopyright{} 2007 by the Ecological Society of America.}, - pmid = {17708207}, - keywords = {Ecosystem services,Functional groups,Institutions,Local ecological knowledge,Management,Sense of place,Urban ecology} -} - -@article{AnderssonSchaeffer2014, - title = {Tool-Complexes of Innovation. : {{Spaces}} for Explorative Innovation in Four Manufacturing Companies}, - author = {Andersson Schaeffer, Jennie and Eriksson, Yvonne}, - year = {2014}, - journal = {Design Research Society Biennial International Conference 16-19 June 2014, Ume\aa, Sweden}, - volume = {1}, - number = {1}, - pages = {663--676}, - abstract = {Providing an environment in which both radical innovation and continuous improvement can exist, i.e. an ambidextrous environment, is one of the biggest challenges manage-ment faces. While having an ...}, - keywords = {Engineering and Technology,Teknik och teknologier} -} - -@article{Andrady2009, - title = {Applications and Societal Benefits of Plastics.}, - author = {Andrady, Anthony L and a Neal, Mike}, - year = {2009}, - journal = {Philosophical transactions of the Royal Society of London. Series B, Biological sciences}, - volume = {364}, - number = {1526}, - pages = {1977--1984}, - issn = {0962-8436}, - doi = {10.1098/rstb.2008.0304}, - abstract = {This article explains the history, from 1600 BC to 2008, of materials that are today termed 'plastics'. It includes production volumes and current consumption patterns of five main commodity plastics: polypropylene, polyethylene, polyvinyl chloride, polystyrene and polyethylene terephthalate. The use of additives to modify the properties of these plastics and any associated safety, in use, issues for the resulting polymeric materials are described. A comparison is made with the thermal and barrier properties of other materials to demonstrate the versatility of plastics. Societal benefits for health, safety, energy saving and material conservation are described, and the particular advantages of plastics in society are outlined. Concerns relating to littering and trends in recycling of plastics are also described. Finally, we give predictions for some of the potential applications of plastic over the next 20 years.}, - isbn = {09628436}, - pmid = {19528050}, - keywords = {americans first processed natural,approximately 1600 bc when,development,history,humans have benefited from,plastic,polymers,rubber into balls,since,society,the ancient meso-,the use of polymers}, - file = {/Users/fabio/Zotero/storage/3Z7AAGYI/Applications and societal benefits of plastics.pdf} -} - -@article{andreasibassiExtendedProducerResponsibility2020, - title = {Extended Producer Responsibility: {{How}} to Unlock the Environmental and Economic Potential of Plastic Packaging Waste?}, - author = {Andreasi Bassi, Susanna and Boldrin, Alessio and Faraca, Giorgia and Astrup, Thomas F.}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105030}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105030}, - urldate = {2020-07-14} -} - -@article{Andreoni2012, - title = {Decoupling Economic Growth from Carbon Dioxide Emissions: {{A}} Decomposition Analysis of {{Italian}} Energy Consumption}, - author = {Andreoni, V. and Galmarini, S.}, - year = {2012}, - journal = {Energy}, - volume = {44}, - number = {1}, - pages = {682--691}, - publisher = {{Elsevier Ltd}}, - issn = {03605442}, - doi = {10.1016/j.energy.2012.05.024}, - urldate = {2020-05-21}, - abstract = {Decomposition analysis is used to assess the progress in decoupling Italian economic growth from CO2 emissions. Using the method developed by Sun JW. Accounting for energy use in China, 1980-94. Energy 1998;23:835-49, the main factors that influence the changes in energy-related CO2 emissions are analysed. The study refers to the period 1998-2006, split into two time intervals (1998-2002 and 2002-2006) and considers four explanatory factors: CO2 intensity, energy intensity, structural changes and economic activity. The importance of sectoral dimension is taken into account by dividing the Italian economy into five main sectors: the agricultural; the industrial; the electricity and heat production, water and gas; the transport and the services sectors. An industrial sub-sector decomposition analysis is also performed by considering six industrial branches. It is found that, during the period considered, the Italian economy did not perform absolute decoupling in terms of energy consumption and carbon dioxide emissions and that economic growth and energy intensity are the largest contributors to CO2 emissions increase. \textcopyright{} 2012 Elsevier Ltd.}, - keywords = {Decomposition analysis,Decoupling,Energy consumption} -} - -@article{angelidouEmergingSmartCity2022, - title = {Emerging Smart City, Transport and Energy Trends in Urban Settings: {{Results}} of a Pan-{{European}} Foresight Exercise with 120 Experts}, - shorttitle = {Emerging Smart City, Transport and Energy Trends in Urban Settings}, - author = {Angelidou, M. and Politis, C. and Panori, A. and Bakratsas, T. and Fellnhofer, K.}, - year = {2022}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {183}, - pages = {121915}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.121915}, - urldate = {2022-08-11}, - abstract = {Forecasting future trends constitutes a key process for supporting urban and territorial policy making in general. In this work, we explore how the domains of smart cities, smart transport, and smart energy will evolve until 2030 from a scientific and technological perspective, as a means to inform future policies for urban development in Europe. We started our work with an extensive review of recent and relevant research, covering policy and market reports, scientific journal articles, and other scientific publications. Then, a two-round Delphi survey with 120 field experts was conducted to assess the plausibility of the literature review findings to materialize until 2030. According to our empirical findings, there will be several speedy and structural changes in the three domains: we were able to identify a set of 18 statements that are highly probable to become reality in the next decade, whereas 17 statements were classified as plausible but not highly probable, and three statements raised controversiality. This work provides significant added value in supporting territorial policymakers' and stakeholders' decision making under uncertainty, as well as in designing highly relevant research agendas, attuned to contemporary and emerging trends.}, - langid = {english}, - keywords = {Delphi survey,Foresight,Responsible Research and Innovation (RRI),Urban development,Urban policy}, - file = {/Users/fabio/Zotero/storage/T9EEPW3M/Angelidou et al_2022_Emerging smart city, transport and energy trends in urban settings.pdf;/Users/fabio/Zotero/storage/VQJF5YQK/S0040162522004371.html} -} - -@article{Angeloni2020, - title = {Education First: {{What}} Really Matters in Working for Sustainability}, - author = {Angeloni, Silvia}, - year = {2020}, - month = apr, - journal = {Futures}, - publisher = {{Elsevier BV}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102552}, - urldate = {2020-04-24}, - abstract = {In a world characterized by rising inequalities, the research explores the connections among macro, meso and micro systems to explain how the goals of global, organizational and individual sustainability could be effectively achieved. While much of recent research has focused on impact of technological progress and globalization on increased inequalities, few studies have systematically investigated complementary and convergent measures to achieve equality and sustainability. To dismantle common misconceptions and concerns, embedded in fragmented and linear ways of seeing complex phenomena, a conceptual paper is developed. By assuming a systemic and multilevel approach, the research illustrates how technological progress, globalization, economic growth and social equity could be reconciled. Without a systemic orientation, the real causes and solutions to inequality problems are not recognized. When a systemic approach is used, technological progress appears as a driver for equality solutions rather than a source of inequality, while education becomes the best antidote to unemployment.} -} - -@article{angEnvironmentalistParadoxDebate2012, - title = {Beyond the {{Environmentalist}}'s {{Paradox}} and the {{Debate}} on {{Weak}} versus {{Strong Sustainability}}}, - author = {Ang, Frederic and Van Passel, Steven}, - year = {2012}, - month = mar, - journal = {BioScience}, - volume = {62}, - number = {3}, - pages = {251--259}, - publisher = {{Oxford Academic}}, - issn = {0006-3568}, - doi = {10.1525/BIO.2012.62.3.6}, - urldate = {2021-08-29}, - abstract = {Environmentalists generally argue that ecological damage will (eventually) lead to declines in human well-being. From this perspective, the recent introduction of the "environmentalist's paradox" in BioScience by Raudsepp-Hearne and colleagues (2010) is particularly significant. In essence, Raudsepp-Hearne and colleagues (2010) claimed that although ecosystem services have been degraded, human well-beingparadoxicallyhas increased. In this article, we show that this debate is in fact rooted in a broader discussion on weak sustainability versus strong sustainability (the substitutability of human-made capital for natural capital). We warn against the reductive nature of focusing only on a stockflow framework in which a natural-capital stock produces ecosystem services. Concretely, we recommend a holistic approach in which the complexity, irreversibility, uncertainty, and ethical predicaments intrinsic to the natural environment and its connections to humanity are also considered. \textcopyright{} 2012 Hinterthuer. ISSN.}, - keywords = {assessments,ecology,natural resources,sustainability}, - file = {/Users/fabio/Zotero/storage/WZTH6YYX/full-text.pdf} -} - -@article{angtuacoRedesignToothpasteTube2023, - title = {A Redesign of the Toothpaste Tube Using Green {{QFD II}} for Improved Usability and Sustainability}, - author = {Angtuaco, Danielle S. and Barria, Nathan Mitchell A. and Lee, Joshua Matthew C. and Tangsoc, Jazmin C. and Chiu, Anthony Shun Fung and Mutuc, Jose Edgar}, - year = {2023}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {393}, - pages = {136279}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136279}, - urldate = {2023-02-12}, - abstract = {Toothpaste tubes are commonly manufactured in the form of soft-body tubes made of aluminum laminate. Studies have shown, however, that this design poses problems with usability (difficulty in extruding toothpaste) and sustainability (difficulty in disposing or recycling of materials). While efforts have been made to alleviate these concerns, new designs fail to adequately address both problems jointly. For this reason, this paper aims to introduce a new design incorporating these two aspects for the benefit of its users and the environment. The Green Quality Deployment (GQFD) II methodology was therefore applied in this study as it employs a quantitative approach to developing products by addressing customer needs while also considering sustainability. It was then determined that a rigid, twistable tube made of polylactic acid (PLA) yielded the best mix of usability and sustainability considerations and was chosen among the other alternatives. This was supported by user feedback given that 6 of the 7 customer requirements showed an enhanced performance compared to the laminated tube, using the Welch's t-test having a p-value of less than 0.05. On average an improvement of 1.16 points (out of a scale of 5) was achieved. This suggests that the integration of both usability and sustainability in product design is possible without compromising on one aspect for the other and that sustainable products need not sacrifice functionality. Thus, it serves as a stepping stone towards achieving sustainable production and consumption by providing functional eco-friendly alternatives.}, - langid = {english}, - keywords = {Product design,toothpaste tube,Usability and sustainability}, - file = {/Users/fabio/Zotero/storage/385KIF9D/Angtuaco et al_2023_A redesign of the toothpaste tube using green QFD II for improved usability and.pdf;/Users/fabio/Zotero/storage/5FBMTKMQ/S0959652623004377.html} -} - -@article{Anitha2001, - title = {Critical Parameters Influencing the Quality of Prototypes in Fused Deposition Modelling}, - author = {Anitha, R and Arunachalam, S and Radhakrishnan, P}, - year = {2001}, - month = dec, - journal = {Journal of Materials Processing Technology}, - volume = {118}, - number = {1-3}, - pages = {385--388}, - issn = {09240136}, - doi = {10.1016/S0924-0136(01)00980-3}, - urldate = {2014-03-05}, - keywords = {fdm,rapid prototyping,taguchi}, - file = {/Users/fabio/Zotero/storage/R8N5R3PM/Anitha, Arunachalam, Radhakrishnan - 2001 - Critical parameters influencing the quality of prototypes in fused deposition modelling.pdf} -} - -@article{annerstenHowWriteResearch2006, - title = {How to Write a Research Proposal}, - author = {Annersten, M and Wredling, R}, - year = {2006}, - month = oct, - journal = {European Diabetes Nursing}, - volume = {3}, - number = {2}, - pages = {102--105}, - issn = {1551-7853, 1551-7861}, - doi = {10.1002/edn.52}, - urldate = {2022-08-31}, - abstract = {A structured written research proposal is a necessary requirement when making an application for research funding or applying to an ethics committee for approval of a research project. A proposal is built up in sections of theoretical background; aim and research questions to be answered; a description and justification of the method chosen to achieve the answer; awareness of the ethical implications of the research; experience and qualifications of the team members to perform the intended study; a budget and a timetable.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/G8KFFZUH/Annersten y Wredling - 2006 - How to write a research proposal.pdf} -} - -@article{Ansari2019, - title = {Application of Thermotropic Liquid Crystalline Polymer Reinforced Acrylonitrile Butadiene Styrene in Fused Filament Fabrication}, - author = {Ansari, Mubashir Q. and Redmann, Alec and Osswald, Tim A. and Bortner, Michael J. and Baird, Donald G.}, - year = {2019}, - month = oct, - journal = {Additive Manufacturing}, - volume = {29}, - pages = {100813}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100813} -} - -@article{ansarOccupationalExposureHazards2021, - title = {Occupational Exposure to Hazards and Volatile Organic Compounds in Small-Scale Plastic Recycling Plants in {{Thailand}} by Integrating Risk and Life Cycle Assessment Concepts}, - author = {Ansar, Muhammed Ayaj and Assawadithalerd, Mongkolchai and Tipmanee, Danai and Laokiat, Laksana and Khamdahsag, Pummarin and Kittipongvises, Suthirat}, - year = {2021}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {329}, - pages = {129582}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129582}, - urldate = {2021-11-30} -} - -@phdthesis{Antikainen2011, - title = {Facilitating Customer Involvement in Collaborative Online Innovation Communities}, - author = {Antikainen, Maria}, - year = {2011}, - address = {{Tempere, Finland}}, - isbn = {9789513877309}, - school = {Tampere University of Technology} -} - -@article{antonopoulosRecyclingPostconsumerPlastic2021, - title = {Recycling of Post-Consumer Plastic Packaging Waste in {{EU}}: {{Process}} Efficiencies, Material Flows, and Barriers}, - author = {Antonopoulos, Ioannis and Faraca, Giorgia and Tonini, Davide}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {126}, - pages = {694--705}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.04.002}, - urldate = {2021-04-29}, - file = {/Users/fabio/Zotero/storage/PEML4WJP/full-text.pdf} -} - -@book{antonyDesignExperimentsEngineers2014, - title = {Design of Experiments for Engineers and Scientists}, - author = {Antony, Jiju}, - year = {2014}, - series = {Elsevier Insights}, - edition = {2nd edition}, - publisher = {{Elsevier}}, - address = {{London}}, - isbn = {978-0-08-099417-8 978-0-08-099419-2}, - langid = {english}, - keywords = {Experimental design,{Research, Industrial}}, - file = {/Users/fabio/Documents/0-Biblio/Experimental design/Jiju Antoy (Auth.) - Design of Experiments for Engineers and Scientists-Elsevier (2014).pdf} -} - -@article{Anzalone2013, - title = {Distributed {{Recycling}} of {{Post-Consumer Plastic Waste}} in {{Rural Areas}}}, - author = {Kreiger, M. and Anzalone, G C and Mulder, M L and Glover, A and Pearce, J. M}, - year = {2013}, - month = feb, - journal = {MRS Proceedings}, - volume = {1492}, - pages = {91--96}, - issn = {0272-9172}, - doi = {10.1557/opl.2013.258}, - urldate = {2014-05-19}, - abstract = {Although the environmental benefits of recycling plastics are well established and most geographic locations within the U.S. offer some plastic recycling, recycling rates are often low. Low recycling rates are often observed in conventional centralized recycling plants due to the challenge of collection and transportation for high-volume low-weight polymers. The recycling rates decline further when low population density, rural and relatively isolated communities are investigated because of the distance to recycling centers makes recycling difficult and both economically and energetically inefficient. The recent development of a class of open source hardware tools (e.g. RecycleBots) able to convert post-consumer plastic waste to polymer filament for 3-D printing offer a means to increase recycling rates by enabling distributed recycling. In addition, to reducing the amount of plastic disposed of in landfills, distributed recycling may also provide low-income families a means to supplement their income with domestic production of small plastic goods. This study investigates the environmental impacts of polymer recycling. A life-cycle analysis (LCA) for centralized plastic recycling is compared to the implementation of distributed recycling in rural areas. Environmental impact of both recycling scenarios is quantified in terms of energy use per unit mass of recycled plastic. A sensitivity analysis is used to determine the environmental impacts of both systems as a function of distance to recycling centers. The results of this LCA study indicate that distributed recycling of HDPE for rural regions is energetically favorable to either using virgin resin or conventional recycling processes. This study indicates that the technical progress in solar photovoltaic devices, open-source 3-D printing and polymer filament extrusion have made distributed polymer recycling and upcycling technically viable.}, - file = {/Users/fabio/Zotero/storage/URW24BZU/Kreiger et al. - 2013 - Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas.pdf} -} - -@article{Anzalone2013a, - title = {A {{Low-Cost Open-Source Metal}} 3-{{D Printer}}}, - author = {Anzalone, Gerald C and {Chenlong Zhang} and Wijnen, Bas and Sanders, Paul G and Pearce, Joshua M}, - year = {2013}, - journal = {IEEE Access}, - volume = {1}, - pages = {803--810}, - issn = {2169-3536}, - doi = {10.1109/ACCESS.2013.2293018}, - urldate = {2014-08-08}, - abstract = {Technical progress in the open-source self replicating rapid prototyper (RepRap) community has enabled a distributed form of additive manufacturing to expand rapidly using polymer-based materials. However, the lack of an open-source metal alternative and the high capital costs and slow throughput of proprietary commercialized metal 3-D printers has severely restricted their deployment. The applications of commercialized metal 3-D printers are limited to only rapid prototyping and expensive finished products. This severely restricts the access of the technology for small and medium enterprises, the developing world and for use in laboratories. This paper reports on the development of a {$<\$$}2000 open-source metal 3-D printer. The metal 3-D printer is controlled with an open-source micro-controller and is a combination of a low-cost commercial gas-metal arc welder and a derivative of the Rostock, a deltabot RepRap. The bill of materials, electrical and mechanical design schematics, and basic construction and operating procedures are provided.Apreliminary technical analysis of the properties of the 3-D printer and the resultant steel products are performed. The results of printing customized functional metal parts are discussed and conclusions are drawn about the potential for the technology and the future work necessary for the mass distribution of this technology}, - file = {/Users/fabio/Zotero/storage/E9XCX3BA/A Low-Cost Open-Source Metal 3-D Printer.pdf;/Users/fabio/Zotero/storage/F398LNB9/A Low-Cost Open-Source Metal 3-D Printer(2).pdf} -} - -@article{Anzalone2013b, - title = {Open-{{Source Colorimeter}}}, - author = {Anzalone, Gerald and Glover, Alexandra and Pearce, Joshua}, - year = {2013}, - month = apr, - journal = {Sensors}, - volume = {13}, - number = {4}, - pages = {5338--5346}, - issn = {1424-8220}, - doi = {10.3390/s130405338}, - abstract = {The high cost of what have historically been sophisticated research-related sensors and tools has limited their adoption to a relatively small group of well-funded researchers. This paper provides a methodology for applying an open-source approach to design and development of a colorimeter. A 3-D printable, open-source colorimeter utilizing only open-source hardware and software solutions and readily available discrete components is discussed and its performance compared to a commercial portable colorimeter. Performance is evaluated with commercial vials prepared for the closed reflux chemical oxygen demand (COD) method. This approach reduced the cost of reliable closed reflux COD by two orders of magnitude making it an economic alternative for the vast majority of potential users. The open-source colorimeter demonstrated good reproducibility and serves as a platform for further development and derivation of the design for other, similar purposes such as nephelometry. This approach promises unprecedented access to sophisticated instrumentation based on low-cost sensors by those most in need of it, under-developed and developing world laboratories.}, - isbn = {1906487146}, - pmid = {23604032}, - keywords = {3-D printer,Arduino,Chemical oxygen demand,COD,Colorimetery,Open source,Open-source colorimeter,Open-source hardware,Open-source sensor,RepRap}, - file = {/Users/fabio/Zotero/storage/R5NIZQJF/Anzalone, Glover, Pearce - 2013 - Open-Source Colorimeter.pdf} -} - -@article{Anzalone2015, - title = {Multi-Material Additive and Subtractive Prosumer Digital Fabrication with a Free and Open-Source Convertible Delta {{RepRap}} 3-{{D}} Printer}, - author = {Anzalone, Gerald C. and Wijnen, Bas and Pearce, Joshua M.}, - year = {2015}, - journal = {Rapid Prototyping Journal}, - volume = {21}, - number = {5}, - pages = {506--519}, - issn = {13552546}, - doi = {10.1108/RPJ-09-2014-0113}, - abstract = {\textcopyright{} Emerald Group Publishing Limited. Purpose - The purpose of this paper is to present novel modifications to a RepRap design that increase RepRap capabilities well beyond just fused filament fabrication. Open-source RepRap 3-D printers have made distributed manufacturing and prototyping an affordable reality. Design/methodology/approach - The design is a significantly modified derivative of the Rostock delta-style RepRap 3-D printer. Modifications were made that permit easy and rapid repurposing of the platform for milling, paste extrusion and several other applications. All of the designs are open-source and freely available. Findings - In addition to producing fused filament parts, the platform successfully produced milled printed circuit boards, milled plastic objects, objects made with paste extrudates, such as silicone, food stuffs and ceramics, pen plotted works and cut vinyl products. The multi-purpose tool saved 90-97 per cent of the capital costs of functionally equivalent dedicated tools. Research limitations/implications - While the platform was used primarily for production of hobby and consumer goods, research implications are significant, as the tool is so versatile and the fact that the designs are open-source and eminently available for modification for more purpose-specific applications. Practical implications - The platform vastly broadens capabilities of a RepRap machine at an extraordinarily low price, expanding the potential for distributed manufacturing and prototyping of items that heretofore required large financial investments. Originality/value - The unique combination of relatively simple modifications to an existing platform has produced a machine having capabilities far exceeding that of any single commercial product. The platform provides users the ability to work with a wide variety of materials and fabrication methods at a price of less than \$1,000, provided users are willing to build the machine themselves.}, - keywords = {3-D,Component manufacturing,Rapid manufacturing,Rapid prototyping,Rapid tooling,Technological change}, - file = {/Users/fabio/Zotero/storage/J2CFKYQV/Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer.pdf} -} - -@article{Appio2018, - title = {Understanding {{Smart Cities}}: {{Innovation}} Ecosystems, Technological Advancements, and Societal Challenges}, - author = {Appio, Francesco Paolo and Lima, Marcos and Paroutis, Sotirios}, - year = {2018}, - month = dec, - journal = {Technological Forecasting and Social Change}, - issn = {00401625}, - doi = {10.1016/j.techfore.2018.12.018} -} - -@article{apriesnigConsequencesMisrepresentingFeedbacks2022, - title = {The Consequences of Misrepresenting Feedbacks in Coupled Human and Environmental Models}, - author = {Apriesnig, Jenny L. and Warziniack, Travis W. and Finnoff, David C. and Zhang, Hongyan and Lee, Katherine D. and Mason, Doran M. and Rutherford, Edward S.}, - year = {2022}, - month = may, - journal = {Ecological Economics}, - volume = {195}, - pages = {107355}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2022.107355}, - urldate = {2022-03-07}, - abstract = {Feedbacks between the ecosystem and the economy are important to consider when measuring impacts from a disturbance but are often omitted from general equilibrium bioeconomic models. These models usually focus on how humans respond to ecological change, but do not consider that in adapting to changed conditions, humans can further affect the ecosystem. We present a framework that couples a regional computable general equilibrium model with an Ecopath with Ecosim food web model with bidirectional feedbacks between the two systems. Our bioeconomic model uniquely represents a comprehensive mapping of the entire regional economy, including recreational and commercial fishing, harvest quotas, and fish biomass in the economic system. We simulate the bioeconomic impacts of a potential Asian carp invasion of Lake Erie's food web and regional economy with and without bidirectional feedbacks between the economy and the ecosystem. When feedbacks are omitted there are large ecological variations in the projected biomass levels of many target species, with differences in biomass of up to 80 percentage points. Results demonstrate the need to reflect bidirectional feedbacks between the economy and the ecosystem; omission of these feedbacks in this case may appear to be economically trivial yet have large ecological consequences.}, - keywords = {Asian carp,Bidirectional feedbacks,Computable general equilibrium,Coupled systems,Ecopath with Ecosim} -} - -@article{Aprile2019, - title = {Intrinsic Incentives in Household Waste Recycling: {{The}} Case of {{Italy}} in the Year 1998}, - author = {Aprile, Maria Carmela and Fiorillo, Damiano}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {227}, - pages = {98--110}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.184} -} - -@article{Arabi, - title = {Impacts of Marine Plastic on Ecosystem Services and Economy: {{State}} of {{South African}} Research}, - author = {Arabi, Sumaiya and Nahman, Anton}, - year = {2020}, - journal = {South African Journal of Science}, - volume = {116}, - number = {5-6}, - issn = {19967489}, - doi = {10.17159/sajs.2020/7695}, - urldate = {2021-07-21}, - abstract = {In addition to its direct impacts on marine ecology and biota, marine plastic debris can affect the delivery of ecosystem services, with resulting impacts on human well-being, society and the economy. It is important to quantify these impacts in economic terms, so as to be able to provide evidence-based support for an appropriate policy response. We review the South African literature on the impacts of marine plastic debris on ecosystem services and on the economy, in order to identify relevant knowledge gaps. The gaps are found to be significant. Some research has been conducted in terms of impacts relating to recreation, aesthetics and tourism and the costs of beach and harbour clean-ups. However, there is a significant lack of research regarding impacts on ecosystem services relating to fisheries and aquaculture, heritage, habitat provision, biodiversity, and nutrient cycles. There is also a significant lack of research regarding direct economic impacts on the transport/shipping and fisheries industries, indirect economic impacts (such as costs associated with health-related impacts), and non-market costs (e.g. impacts on scenic, cultural and spiritual values). More research is needed in South Africa to address these gaps, in order to inform policy aimed at addressing plastic waste and marine plastic debris. Significance: \textbullet{} This review highlights the knowledge gaps in terms of the impacts of marine plastics on ecosystem services and on the economy in South Africa, which are important to understand in order to be able to direct funding for future research in this domain. Without better knowledge of the economic impacts of marine plastic debris, it is difficult to assess the costs of inaction, and therefore to inform an appropriate policy response for tackling the problem of marine plastic debris.}, - keywords = {Economic impacts,Marine plastic debris,Plastic pollution}, - file = {/Users/fabio/Zotero/storage/H9VZ7JZR/05.pdf} -} - -@article{araujoUseCollaborationNetworks2021, - title = {The Use of Collaboration Networks in Search of Eco-Innovation: {{A}} Systematic Literature Review}, - author = {Ara{\'u}jo, Renato and Franco, M{\'a}rio}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {314}, - pages = {127975}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127975}, - urldate = {2021-07-05}, - abstract = {Governments have increasingly encouraged firms to have products, cleaner production processes and service provision with less ecological impact. Therefore, eco-innovation has become the focus of many firms, and consequently, researchers and managers have paid more attention to this aspect. However, only a few studies provide a global research panorama. The main aim of this study is to review the literature on collaboration between organisations towards eco-innovation, and in doing so, orient future research on this very important area. To achieve this purpose, a Systematic Literature Review (SLR) was undertaken, using the Scopus database. In total, 40 publications dealing with the main studies related to collaborative eco-innovation were identified and analysed. The results obtained led to the conclusion that eco-innovation can have important effects on organisational performance, if carried out in collaboration. However, it is necessary to know about and make an appropriate choice of partners to pursue this type of innovation. Thus, the main contribution of this study is to bring together in one single research the most relevant collaborative studies for eco-innovation, in order to follow future research paths in this important theme of the world economy. Future lines of research in this area are also presented.} -} - -@article{Arbelaez-Garces2018, - title = {Contribution to the Objective Assessment of Technical Skills for Surgery Students: {{An}} Accelerometer Based Approach}, - author = {{Arbelaez-Garces}, Giovanny and Joseph, David and Camargo, Mauricio and Tran, Nguyen and Morel, Laure}, - year = {2018}, - month = mar, - journal = {International Journal of Industrial Ergonomics}, - volume = {64}, - pages = {79--88}, - publisher = {{Elsevier B.V}}, - issn = {01698141}, - doi = {10.1016/j.ergon.2017.12.002}, - abstract = {Aim of study Gestural skills assessment in odontology is a highly complex task. Although mandatory for certification, proficiency assessment is still required for parameters that are more objective. Our aim was to assess whether accelerometer sensors might contribute to distinguishing efficiency in therapeutic gesture from experts and novices in the realization of surgical sutures. Material and method 3 groups of participants: novices (n = 8), intermediaries (n = 14) and experts (n = 7) were enrolled in the study. They had to perform different types of odontological suture. We used 2 wireless wrist sensors to measure objectively the acceleration of both hands and to deduce the economy and the fluidity of the movement. A video recording was also used to complete the assessment. Results The time and motion criteria were documented to significantly correlate with the experience of the participant. The total time factor has a significant effect with the experience level (p = 0.006). The fluidity of the movement has also been shown to vary significantly between groups. Conclusion The use of accelerometers coupled with image analysis could make it possible to envisage in the long run an objective evaluation for this type of surgical gesture.}, - keywords = {Accelerometers,Basic skills,Dental pedagogic strategy,Objective assessment,Suturing}, - file = {/Users/fabio/Zotero/storage/P6QJIMEK/Contribution to the objective assessment of technical skills for surgery students An accelerometer based approach.pdf} -} - -@article{archodoulakiRecyclingViabilityMatter2020, - title = {Recycling Viability: {{A}} Matter of Numbers}, - author = {Archodoulaki, Vasiliki-Maria and Jones, Mitchell P}, - year = {2020}, - doi = {10.1016/j.resconrec.2020.105333}, - urldate = {2020-12-21}, - keywords = {Commerce,Recycling,Society,Sustainability,Technology,Viability}, - file = {/Users/fabio/Zotero/storage/WITVAQB7/full-text.pdf} -} - -@article{Arciniegas2019, - title = {A Geodesign Decision Support Environment for Integrating Management of Resource Flows in Spatial Planning}, - author = {Arciniegas, Gustavo and {\v S}ileryt{\'e}, Rusn{\'e} and D{\k{a}}browski, Marcin and Wandl, Alexander and Dukai, Bal{\'a}zs and Bohnet, Max and Gutsche, Jens Martin}, - year = {2019}, - journal = {Urban Planning}, - volume = {4}, - number = {3}, - pages = {32--51}, - issn = {21837635}, - doi = {10.17645/up.v4i3.2173}, - abstract = {Improving waste and resource management entails working on interrelations between different material flows, territories and groups of actors. This calls for new decision support tools for translating the complex information on flows into accessible knowledge usable by stakeholders in the spatial planning process. This article describes an open source tool based on the geodesign approach, which links the co-creation of design proposals together with stakeholders, impact simulations informed by geographic contexts, systems thinking, and digital technology\textemdash the Geodesign Decision Support Environment. Though already used for strategic spatial planning, the potential of geodesign for waste management and recycling is yet to be explored. This article draws on empirical evidence from the pioneering application of the tool to promote spatially explicit circular economy strategies in the Amsterdam Metropolitan Area.}, - keywords = {Amsterdam,Circular economy,Decision support tools,Geodesign,Recycling,Urban living labs,Waste management}, - file = {/Users/fabio/Zotero/storage/Y93S9UB9/UP 4(3) - A Geodesign Decision Support Environment for Integrating Management of Resource Flows in Spatial Planning.pdf} -} - -@article{Arcos2020, - ids = {pozoarcos2020}, - title = {Practices of Fault Diagnosis in Household Appliances: {{Insights}} for Design}, - author = {Arcos, Beatriz Pozo and Bakker, Conny and Flipsen, Bas and Balkenende, Ruud}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {265}, - pages = {121812}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121812}, - urldate = {2020-05-10}, - keywords = {Circular economy,Design guidelines,Fault diagnosis,Product design,Repair,Troubleshooting}, - file = {/Users/fabio/Zotero/storage/Y5UP866R/full-text.pdf} -} - -@article{Ardal2016, - title = {Financing and Collaboration on Research and Development for Nodding Syndrome}, - author = {{\AA}rdal, Christine and R{\o}ttingen, John Arne}, - year = {2016}, - journal = {Health Research Policy and Systems}, - volume = {14}, - number = {1}, - pages = {1--7}, - publisher = {{Health Research Policy and Systems}}, - issn = {14784505}, - doi = {10.1186/s12961-016-0091-6}, - abstract = {\textcopyright{} 2016 \AA rdal and R\o ttingen. Background: Nodding syndrome is a neurological disease with no known cure or treatment, impacting children aged 3-18 years old, mainly in East Africa. Children progressively develop varying degrees of cognitive impairment which may lead to severe wasting, a vegetative state and, eventually, death. Despite its 50-year existence, little is known about its cause, risk factors and prognosis. It is a disease where markets will not provide solutions because the patients are both too few and too poor, making it especially neglected. Open source innovation has been recommended as an approach to neglected disease research in order to maximize available funding through greater collaboration and openness to results. Nodding syndrome is a useful case to examine the relevance of open source innovation. Methods: We assessed the magnitude of research related to nodding syndrome, its availability, financing and the amount of collaboration. We surveyed researchers regarding their motivations, attitudes toward open source innovation concepts and barriers to greater collaboration. Results: Little research is occurring for nodding syndrome, but it is openly available and researchers are highly collaborative. The disease is largely unknown, which is partly attributed to WHO not classifying nodding syndrome as a neglected tropical disease and not including it in any formal programme. Impacted countries, particularly Uganda, demonstrate a strong degree of ownership through both authorship and research financing. Nodding syndrome researchers have been allocated a total of \texteuro 5 million from 2013 to 2019 in grant funding. Annual financing, due to three new grants, doubled from 2014 to 2015. Conclusions: Nodding syndrome, a disease previously ignored by the international community, is starting to receive greater attention, although financing remains modest. If infectious, a larger epidemic could take the world by surprise. Open source innovation can likely help by sharing research protocols (to avoid duplication) and early research results (to adjust to the findings of others). The existing scientists have already endorsed open source innovation, but increased financing is needed. The support of just a few high-income countries could reap a large impact.}, - keywords = {Market failures,Neglected tropical diseases,Nodding syndrome,Open knowledge innovation,Open science,Open source drug discovery,Open source innovation}, - file = {/Users/fabio/Zotero/storage/JUXCJKMX/Financing and collaboration on research and development for nodding syndrome.pdf} -} - -@article{Arena2003, - title = {Life {{Cycle}} Assessment of a Plastic Packaging Recycling System}, - author = {Arena, Umberto and Mastellone, Maria Laura and Perugini, Floriana}, - year = {2003}, - month = mar, - journal = {The International Journal of Life Cycle Assessment}, - volume = {8}, - number = {2}, - pages = {92--98}, - issn = {0948-3349}, - doi = {10.1007/BF02978432}, - abstract = {Goal, Scope and Background. The object of the study is the Ital- ian system of plastic packaging waste recycling, active until 2001, that collected and mechanically recycled the post-consumer PE and PET liquid containers. The phases of collection, compaction, sorting, reprocessing and refuse disposal were individually ana- lysed and quantified in terms of energy and material consumptions as well as of emissions in the environment. The work is the result of a joint research project with the Italian Consortium for Pack- aging (CONAI), carried out in co-operation with the main Italian companies active in the field. The main aim was the quantifica- tion of the real advantage of plastic container recycling and the definition of criteria, at the same time environmentally compat- ible and economically sustainable, for their management. Main Features. For each of the unit processes, and in order to in- crease the data quality, all the data of interest were collected during technical visits to several selected plants active in Italy or deduced by official documents and certificate declarations of the same com- panies. To allow comparison of resource consumption and envi- ronmental pollution from different management scenarios produc- ing different products, the basket of products method was applied. Results. The results indicates that the production of I kg of flakes of recycled PET requires a total amount of gross energy that is in the range of between 42 and 55 M J, depending on whether the process wastes (mainly coming from sorting and reprocessing ac- tivities) were sent or not to the energy recovery. The same quan- tity of virgin PET requires more than 77 MJ. The energetic (and then environmental) saving is so remarkable, even for PE, being 40-49 MJ for the recycled polymer and about 80 MJ that for the virgin polyolefin. The calculations were made with the reason- able assumption that the final utilisation can use the virgin or the recycled polymer without any difference. Conclusions and Outlook. The analysis defined and verified a suitable tool in the field, based on objective data, for comparing different coherent scenarios of waste management politics. This allows one to propose the extension of the tool under different collection schemes, as well as for different systems of packaging recycling. As an immediate consequence of the success of the present study, the joint-research programme with CONAI has been extended for another three years. The focus will be the Italian system for paper and paperboard recycling and that for all plastic packagings. In parallel, a different study has been scheduled with reference to the integrated solid waste manage- ment of the Regione Campania, the largest and most populated area in the South of Italy. Keywords:}, - isbn = {0948-3349}, - pmid = {2294}, - keywords = {ers,intelligent application of crude,is still,life cycle assessment,of this valuable resource,oil,pe containers,pet contain-,plastic packaging,plastic recycling,plastics constitute the most,since more than 80}, - file = {/Users/fabio/Zotero/storage/DAJBYTTE/Life Cycle assessment of a plastic packaging recycling system.pdf} -} - -@article{argentonfreireChallengesOpenDesign2022, - title = {Challenges of Open Design in Low-Income Communities: A Case Study of Residential Rainwater Harvesting Systems}, - shorttitle = {Challenges of Open Design in Low-Income Communities}, - author = {Argenton Freire, Rodrigo and Lev{\"a}nen, Jarkko and Bonvoisin, J{\'e}r{\'e}my}, - year = {2022}, - month = jul, - journal = {CoDesign}, - volume = {18}, - number = {3}, - pages = {303--321}, - publisher = {{Taylor \& Francis}}, - issn = {1571-0882}, - doi = {10.1080/15710882.2021.1883066}, - urldate = {2022-10-10}, - abstract = {Open design (OD) is a promising approach to address global sustainability challenges. At the same time, however, the increased use of OD brings new challenges. To understand the potential of OD in a specific context, we adopted the concept of a residential rainwater harvesting system (RWHS) as a case study. We first identified the critical design features of the RWHS. After that, we analysed the potential for local reproduction of these features at the grassroots level of low-income communities in developing countries. This analysis revealed that varying limitations related to materials, skills, and manufacturing tools may hamper the adoption of OD by local communities when trying to improve their water management. In the light of our findings, we argue that OD processes are likely to face challenges if replicability, substitutability and adaptability are not successfully integrated into the design. We suggest a design-for-frugality mindset and adoption of parametric design processes and design parameters as key strategies to boost OD processes in low-income communities. We also stress the importance of safety and liability aspects in the studied context.}, - keywords = {Do-it-yourself,open design,replicability,residential rainwater harvesting systems,sustainability}, - file = {/Users/fabio/Zotero/storage/7T7M7XWM/Argenton Freire et al_2022_Challenges of open design in low-income communities.pdf} -} - -@article{Ariza2019, - title = {Towards Education Alternatives to Teaching and Learning of Programming: {{A}} Course Experience Using Open Hardware Tools}, - author = {Ariza, Jonathan Alvarez}, - year = {2019}, - journal = {Proceedings - Frontiers in Education Conference, FIE}, - volume = {2018-Octob}, - issn = {15394565}, - doi = {10.1109/FIE.2018.8658657}, - abstract = {This full paper proposes an educational methodology to teaching and learning of programming using both open hardware tools and industrial components such as Arduino, Raspberry Pi, three phase motors and variable speed drives. The methodology aims to improve the algorithmic thinking in the students due to the deficiencies detected in it, as well as, it searches that the students learn a second programming language, using hands-on designs and activities that require the components mentioned. In addition, the methodology has been employed into the curriculum of a course of programming known as (open hardware) for students of technology in electronics (n = 22), observing that the students learn programming concepts in a better way and their motivation and engagement towards the software area was increased during the course. To technical level, the methodology uses the programming language Python in order to interact with the different ports, peripherals and utilities of the platforms mentioned, creating a link between these elements and the aspects concerning the software design, e.g., data types, classes, methods or Graphical User Interfaces (GUIs). Finally, the methodology takes into account two important aspects, firstly, the skills developed by the students in the proposal are involved into the BoK (Body of Knowledge) of different engineering areas as embedded systems, control and computer science and, secondly, programming is perhaps one of the most difficult areas in engineering but in turn, it has a ubiquitous nature in the areas mentioned.}, - isbn = {9781538611739}, - keywords = {Cooperative Learning (CL),Design Based Learning (DBL),Open Hardware Platforms,Programming Education,Python}, - file = {/Users/fabio/Zotero/storage/FM9AQ84W/Towards education alternatives to teaching and learning of programming- A course experience using open hardware tools.pdf} -} - -@article{Arnaldi2020, - title = {Wisdom, {{Responsibility}} and {{Futures}}: {{Introduction}} to {{WiseFutures N}}.0}, - author = {Arnaldi, Simone and Eidinow, Esther and Siebers, Johan and Wangel, Josefin}, - year = {2020}, - month = feb, - journal = {Futures}, - pages = {102529}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102529} -} - -@article{arndtDoItYourselfLaboratoriesCommunities2021, - title = {Do-{{It-Yourself}} Laboratories, Communities of Practice, and Open Innovation in a Digitalised Environment}, - author = {Arndt, F{\'e}lix and Ng, Wilson and Huang, Tori}, - year = {2021}, - month = jun, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--12}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1931674}, - urldate = {2021-06-10}, - abstract = {A growing literature has explored the role of innovation as a driver of healthy economies. We discuss the role of Do-It-Yourself laboratories (`DIY labs') in driving open innovation. Digitalisation...}, - keywords = {Communities of Practice,digitisation,DIY labs,open innovation} -} - -@techreport{Arnkil2010a, - title = {Exploring {{Quadruple Helix}}: {{Outlining}} User-Oriented Innovation Models. {{Final Report}} on {{Quadruple Helix Research}} for the {{CLIQ}} Project}, - author = {Arnkil, Robert and J{\"a}rvensivu, Anu and Koski, Pasi and Piirainen, Tatu}, - year = {2010}, - pages = {131}, - address = {{Tampere}}, - institution = {{University of Tampere Institute for Social Research Work Research Centre}}, - abstract = {Quadruple Helix (QH), with its emphasis on broad cooperation in innovation, represents a shift towards systemic, open and user-centric innovation policy. An era of linear, top-down, expert driven development, production and services is giving way to different forms and levels of coproduction with consumers, customers and citizens. This also sets a challenge for public authorities and the production of public services.}, - isbn = {9789514482083}, - file = {/Users/fabio/Zotero/storage/QSLEHKQT/Quadruple Helix.pdf} -} - -@article{arnoldPerspectivePromotingFostering2021, - title = {``{{Perspective}}: {{Promoting}} and Fostering Multidisciplinary Research in Universities''}, - author = {Arnold, Austin and Cafer, Anne and Green, John and Haines, Seena and Mann, Georgianna and Rosenthal, Meagen}, - year = {2021}, - month = nov, - journal = {Research Policy}, - volume = {50}, - number = {9}, - pages = {104334}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104334}, - urldate = {2021-08-24} -} - -@article{arnottCoproducingScienceSustainability2020, - title = {Co-Producing Science for Sustainability: {{Can}} Funding Change Knowledge Use?}, - author = {Arnott, James C. and Neuenfeldt, Rachel J. and Lemos, Maria Carmen}, - year = {2020}, - month = jan, - journal = {Global Environmental Change}, - volume = {60}, - publisher = {{Elsevier Ltd}}, - issn = {09593780}, - doi = {10.1016/j.gloenvcha.2019.101979}, - urldate = {2021-04-29}, - abstract = {There is widespread belief that meaningful interaction between scientists and practitioners, or co-production, increases use of scientific knowledge about sustainability and environmental change. Although funders are increasingly encouraging co-production, there have been few empirical studies assessing the outcomes of these efforts in shaping knowledge use. In this study, we systematically analyze research project reports (n = 120) and interview project participants (n = 40) funded by the U.S. National Estuarine Research Reserve System from 1998 to 2014 to support coastal management. Our analysis shows that escalating funding requirements for collaboration with users change research practice and strengthen connections between research outcomes and knowledge use. In consequence, a new model for science funding emerges, where sponsor, researcher, and user are more interactive with one another.}, - keywords = {Co-production,Coastal management,Environmental management,Research utilization,Science funding,Science policy,Science-practice interaction,Societal impact of science}, - file = {/Users/fabio/Zotero/storage/K9QYSJ9L/full-text.pdf} -} - -@article{arnottPensPurseStrings2021, - title = {Pens and Purse Strings: {{Exploring}} the Opportunities and Limits to Funding Actionable Sustainability Science}, - author = {Arnott, James C.}, - year = {2021}, - month = dec, - journal = {Research Policy}, - volume = {50}, - number = {10}, - pages = {104362}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104362}, - urldate = {2021-09-15} -} - -@article{arnottUnderstandingKnowledgeUse2021, - title = {Understanding Knowledge Use for Sustainability}, - author = {Arnott, James C. and Lemos, Maria Carmen}, - year = {2021}, - month = jun, - journal = {Environmental Science and Policy}, - volume = {120}, - pages = {222--230}, - publisher = {{Elsevier Ltd}}, - issn = {18736416}, - doi = {10.1016/j.envsci.2021.02.016}, - urldate = {2021-04-29}, - abstract = {Scientific research is increasingly motivated to produce knowledge for sustainability decision-making and action. This is driving some funders, academic institutions, and researchers to pursue research approaches that are more interactive with potential users of the knowledge created. Yet despite compelling evidence that these more collaborative approaches lead to increased use, it remains unclear what constitutes use and how to evaluate its societal impact. To understand knowledge utilization better, we use data from in-depth interviews of research project team leaders funded through an applied coastal research program in the United States. We show that, empirically, what constitutes `use' remains elusive: researchers believe that their efforts yield usable knowledge that is impactful but find it difficult to provide clear descriptions about specific uses, user identities, attribution, and evidence of broader outcomes. We argue that rather than an impediment to understanding knowledge utilization, these findings may suggest the inherent messiness of knowledge production and use. These results build on prior findings about the methodological obstacles to studying or explaining knowledge utilization and offer new insight into factors that shape the linking of sustainability knowledge and action.}, - keywords = {Co-production,Coastal management,Environmental management,Research utilization,Science funding,Science of actionable knowledge,Science policy,Science-practice interaction,Societal impact of science}, - file = {/Users/fabio/Zotero/storage/D33XIYL9/full-text.pdf} -} - -@article{arnouldEmbeddingNonindustrialPrivate2022, - title = {Embedding Non-Industrial Private Forest Owners in Forest Policy and Bioeconomy Issues Using a {{Living Lab}} Concept}, - author = {Arnould, Maxence and Morel, Laure and Fournier, Meriem}, - year = {2022}, - month = jun, - journal = {Forest Policy and Economics}, - volume = {139}, - pages = {102716}, - issn = {1389-9341}, - doi = {10.1016/j.forpol.2022.102716}, - urldate = {2023-01-08}, - abstract = {International policies have set sustainable development goals that put emphasis on bioeconomy strategies based on renewable resources. The forestry sector, by providing bio-based products, is expected to take part in this bioeconomy with, among other things, the reduction of society's dependence on fossil fuels. Nevertheless, in Europe, the forestry sector is facing an increase in the number of small private forest ownerships, called non-industrial private forests (NIPF), where wood mobilization is difficult due to both ownership fragmentation and the lack of interest of non-industrial forest owners in existing forest-wood chains. Although many policy instruments have been put in place to address this situation, the problem persists for two main reasons. First, a lack of use of policy instruments by forest owners and second, a lack of collaboration between stakeholders. To provide solutions, we propose a methodology to design territorial projects with non-industrial forest owners in the framework of a Living Lab innovation process. This paper presents both the general method developed and analyzed through open and user-centered innovation concepts and its practical implementation in the Vosges department in France. Our results show how the Living Lab approach can improve the acceptance, adoption and use of policy instruments by NIPF owners and how it promotes multi-stakeholder collaborations to design and deploy innovative solutions. The main interest of our study is to provide a methodology to pilot a forestry Living Lab for policy makers and practitioners, based on rigorous concepts of innovation management. Finally, future developments and limitations of our study are discussed in a global research perspective.}, - langid = {english}, - keywords = {Action research,French forest policy,Living Lab,Wood mobilization}, - file = {/Users/fabio/Zotero/storage/AW8MDZA6/Arnould et al_2022_Embedding non-industrial private forest owners in forest policy and bioeconomy.pdf;/Users/fabio/Zotero/storage/CVLQ7K2U/S1389934122000284.html} -} - -@article{arocenaUniversitiesSocialInnovation2021, - ids = {Arocena2021}, - title = {Universities and Social Innovation for Global Sustainable Development as Seen from the South}, - author = {Arocena, Rodrigo and Sutz, Judith}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120399}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120399}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/F8Z894X7/full-text.pdf} -} - -@article{Arranz2019, - title = {Incentives and Inhibiting Factors of Eco-Innovation in the {{Spanish}} Firms}, - author = {Arranz, N. and Arroyabe, M.F. and {Molina-Garc{\'i}a}, A. and {Fernandez de Arroyabe}, J.C.}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {167--176}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.126} -} - -@misc{Arrete14Avril, - title = {Arr\^et\'e Du 14 Avril 2022 Portant Approbation de La Convention Constitutive Du Groupement d'int\'er\^et Public D\'enomm\'e \guillemotleft{} {{France Tiers Lieux}} \guillemotright}, - urldate = {2023-03-16} -} - -@article{arshadEvaluationUrbanHeat2021, - title = {Evaluation of the Urban Heat Island over {{Abha-Khamis Mushait}} Tourist Resort Due to Rapid Urbanisation in {{Asir}}, {{Saudi Arabia}}}, - author = {Arshad, Muhammad and Khedher, Khaled M. and Eid, Ebrahem M. and Aina, Yusuf A.}, - year = {2021}, - month = mar, - journal = {Urban Climate}, - volume = {36}, - publisher = {{Elsevier B.V.}}, - urldate = {2021-09-15}, - abstract = {Increased knowledge of heat island surfaces (HIS) and intense heat island surfaces (IHIS) in urban environments is critical for the mitigation of excess urban heat and the associated burden on power grids. In this study, we propose a robust thermal remote sensing solution for the delineation of HIS and IHIS areas in Abha and Khamis, a tourist resort in southern Saudi Arabia. Land surface temperature (LST) classification images were retrieved by applying the Single Channel Algorithm (SCA) to thermal band 10 of Landsat 08 data. The pixels of the LST images were grouped based on temperature ranges using ENVI 5.5 software, and were then delineated into classification images of HIS and IHIS areas. Analysis of these images revealed that the overall area of HIS dynamics in both Abha and Khamis ranged from 562 to 826 km2, with temperature variations between 36.0 \textdegree C and 41.0 \textdegree C, while IHIS ranged from under 1 to 14 km2, with temperature fluctuations ranging between 40 and 46 \textdegree C. The city of Khamis had larger summer HIS and IHIS areas than the city of Abha. This study has a strong potential to support local stakeholders, including urban planners, in tracking and offsetting the negative urban heat island (UHI) effects that result from population growth and an increase in impervious surfaces.}, - keywords = {Geospatial techniques,Heat island surfaces,Single channel algorithm,Thermal infrared remote sensing,Urban growth,Urban planning} -} - -@article{arsovaEUGreenDeal2021, - title = {The {{EU}} Green Deal: {{Spreading}} or Concentrating Prosperity?}, - author = {Arsova, Sanja and Corpakis, Dimitris and Genovese, Andrea and Ketikidis, Panayiotis H.}, - year = {2021}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {171}, - pages = {105637}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105637}, - urldate = {2021-05-10} -} - -@article{arsovaImplementingCircularEconomy2022, - title = {Implementing Circular Economy in a Regional Context: {{A}} Systematic Literature Review and a Research Agenda}, - shorttitle = {Implementing Circular Economy in a Regional Context}, - author = {Arsova, Sanja and Genovese, Andrea and Ketikidis, Panayiotis H.}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {368}, - pages = {133117}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133117}, - urldate = {2022-08-10}, - abstract = {Regions are the most important administrative units of the EU's development policies and so far, have been extensively used for framing and implementing strategic priorities. However, when it comes to regional implementation of the circular economy (CE), there is lack of systematicity both in academic literature and policy documents. Therefore, the main purpose of this study is to improve the understanding of the regional adoption of CE, by systematically reviewing and synthesises the current academic literature in this emerging field, unveiling research gaps and discussing a future research agenda. The review was conducted by identifying relevant academic papers from leading journals using the Scopus and Web of Science databases. Overall, 82 relevant papers were identified through the review, which proceeded to descriptive, bibliometric and content analysis. This study has found that generally, the adoption of the circular economy on the regional level is underexplored, which was supported by the dearth of relevant academic contributions detected at the beginning of the process. To the best of the researchers' knowledge, this is the first attempt to provide a holistic systematic literature review in the regional circular economy domain. Hence, the present study is considered as a crucial initial contribution in the direction of establishing robust conceptual frameworks which involve the constructs of regional circular economy and laying the groundwork for future studies in this field.}, - langid = {english}, - keywords = {Circular economy,Institutional pressures,Regional development,Regional policy,Smart specialisation,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/U2YSDS9R/Arsova et al_2022_Implementing circular economy in a regional context.pdf;/Users/fabio/Zotero/storage/E4NC96AZ/S0959652622027068.html} -} - -@article{Arthur2020, - title = {Mechanical {{Properties}} of {{Direct Waste Printing}} of {{Polylactic Acid}} with {{Universal Pellets Extruder}}: {{Comparison}} to {{Fused Filament Fabrication}} on {{Open-Source Desktop Three-Dimensional Printers}}}, - author = {Alexandre, Arthur and Cruz Sanchez, Fabio A. and Boudaoud, Hakim and Camargo, Mauricio and Pearce, Joshua M.}, - year = {2020}, - month = apr, - journal = {3D Printing and Additive Manufacturing}, - pages = {3dp.2019.0195}, - publisher = {{Mary Ann Liebert Inc}}, - issn = {2329-7662}, - doi = {10.1089/3dp.2019.0195}, - urldate = {2020-05-13}, - abstract = {Fused filament fabrication (FFF) is the most common and widespread additive manufacturing (AM) technique, but it requires the formation of filament. Fused granular fabrication (FGF), where plastic ...}, - copyright = {All rights reserved}, - keywords = {distributed recycling,fused granular fabrication,PLA,polylactic acid,recycling,tensile properties}, - file = {/Users/fabio/Zotero/storage/8B65VGGP/3dp.2019.0195.pdf} -} - -@article{Aryampa2021, - title = {A Framework for Assessing the {{Ecological Sustainability}} of {{Waste Disposal Sites}} ({{EcoSWaD}})}, - author = {Aryampa, Shamim and Maheshwari, Basant and Sabiiti, Elly N. and Zamorano, Montserrat}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {126}, - pages = {11--20}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2021.02.044}, - urldate = {2021-03-28}, - abstract = {Although the need for sustainability of waste disposal sites (WDS) is largely agreed upon by various stakeholders, there is still a limitation in evaluating sites' sustainability. This study aimed to define ecological sustainability for WDS and develop a framework for its assessment. A WDS's ecological sustainability was defined as the site's capacity to take up waste without compromising the surrounding ecosystems' health and their abilities to self-regenerate or provide other ecosystem services. A model, called EcoSWaD, was developed in this study to assess the ecological sustainability of WDS. The model has 35 indicators divided into five major themes: (i) location suitability; (ii) operational sustainability; (iii) environmental sustainability; (iv) socioeconomic sustainability; and (v) site capacity sustainability. The EcoSWaD brought together all the different interpretations and indicators in the diverse fields of sustainability study or practice to facilitate a comprehensive and meaningful WDS assessment. Testing the model at the Kiteezi landfill showed that the location, environmental, socioeconomic and site capacity themes at the landfill had low values: 18.7, 19.1, 16.9 and 15, respectively. The operation theme had a very low value of 13.5, showing that the landfill's biggest sustainability concerns stem from site operation and the resultant impact on the environment, local community and site capacity. The overall Sustainability Score of 83.1 showed that the landfill's sustainability is low. A tool for the application of the EcoSWaD can be found at https://ecoswad.org/app/console/.}, - pmid = {33730655}, - keywords = {Ecological sustainability,EcoSWaD,Kiteezi landfill,Sustainability assessment,Waste disposal sites,Waste management} -} - -@article{aryanValorisationPolylacticAcid2021, - title = {Valorisation of Polylactic Acid ({{PLA}}) Waste: {{A}} Comparative Life Cycle Assessment of Various Solvent-Based Chemical Recycling Technologies}, - author = {Aryan, Venkat and Maga, Daniel and Majgaonkar, Pranav and Hanich, Ronny}, - year = {2021}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {172}, - pages = {105670}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105670}, - urldate = {2021-06-10} -} - -@article{Asada2020, - title = {Effective Bioeconomy? A {{MRIO-based}} Socioeconomic and Environmental Impact Assessment of Generic Sectoral Innovations}, - author = {Asada, Raphael and Cardellini, Giuseppe and {Mair-Bauernfeind}, Claudia and Wenger, Julia and Haas, Verena and Holzer, Daniel and Stern, Tobias}, - year = {2020}, - journal = {Technological Forecasting and Social Change}, - volume = {153}, - number = {August 2019}, - pages = {119946}, - publisher = {{Elsevier}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119946}, - abstract = {The European Commission (EC) expects a bioeconomic transition to have both environmental and socioeconomic benefits. While bioeconomic impact assessments exist, they usually focus on a particular sustainability dimension and on specific products or technologies. To draw a more holistic picture, this paper aims to analyze the substitution impacts of four bioeconomic innovations in terms of policy objectives as formulated by the EC. We estimated the indirect impacts resulting from a partial replacement of non-bio-based inputs with bio-based substitutes in the transport equipment, construction, textile, and chemical sectors. A multi-regional input-output (MRIO)-based approach was used to yield point estimates and uncertainty intervals. While our results point to a number of possible socioeconomic and environmental benefits, there is an astonishing diversity of outcomes across the scenarios with regard to their potentials and limitations to contribute to policy objectives. Decisions on future utilization paths of biomass will strongly influence the characteristics of an upcoming bioeconomy in terms of sustainability. Mere promotion of additional biomass use as a policy strategy is not sufficient to pursue the development of an effective bioeconomy capable to deliver ``sustainable growth.''}, - keywords = {Bio-based economy,Bio-based innovation,Bioeconomy policy,Competing goals dilemma,Input-output analysis,Monte carlo simulation,Sustainability trade-off}, - file = {/Users/fabio/Zotero/storage/EJ7VAVNR/Effective bioeconomy a MRIO-based socioeconomic and environmental impact assessment of generic sectoral innovations.pdf} -} - -@article{Asadollahi-Yazdi2018, - title = {Toward Integrated Design of Additive Manufacturing through a Process Development Model and Multi-Objective Optimization}, - author = {{Asadollahi-Yazdi}, Elnaz and Gardan, Julien and Lafon, Pascal}, - year = {2018}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {96}, - number = {9-12}, - pages = {4145--4164}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-018-1880-6}, - abstract = {\textcopyright{} 2018, Springer-Verlag London Ltd., part of Springer Nature. This paper deals with design for manufacturing (DFM) approach for additive manufacturing (AM) to investigate simultaneously the different attributes and criteria of design and manufacturing. The integrated design approach is provided in the product definition level and it gradually maps the customer requirements to the final product model. The main contribution of this paper is an interface processing engine that is an interface between the product model and manufacturing model. This study uses the Skin-Skeleton approach to model the first definition of the product and model the material flow of AM technology as the manufacturing process. This engine is developed through analysis of all AM technologies and identification of their parameters, criteria, and drawbacks. In order to evaluate some product and process parameters, a multi-objective problem is formulated based on the analysis of all AM technologies; production time and material mass are optimized regarding mechanical behavior of the material and roughness of product. The approach is validated by a case study through a bag hook example. From its requirement specification to the proposed approach, this article defines an optimized product and its manufacturing parameters for fused deposition modeling (FDM) technology.}, - keywords = {Additive manufacturing,Design for manufacturing,Fused deposition modeling,Multi-objective optimization problem,Skin-Skeleton approach,Stochastic algorithm}, - file = {/Users/fabio/Zotero/storage/MEPQZQ8P/Toward integrated design of additive manufacturing through a process development model and multi-objective optimization.pdf} -} - -@article{asenbaumleadauthorFuturingDemocracyLabs2021, - title = {({{De}})Futuring Democracy: {{Labs}}, Playgrounds, and Ateliers as Democratic Innovations}, - author = {{Asenbaum (lead author)}, Hans and Hanusch, Frederic}, - year = {2021}, - month = dec, - journal = {Futures}, - volume = {134}, - pages = {102836}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2021.102836}, - urldate = {2021-09-15} -} - -@article{asgariHowCircularEconomy2021, - title = {How Circular Economy Transforms Business Models in a Transition towards Circular Ecosystem: The Barriers and Incentives}, - author = {Asgari, Amir and Asgari, Reza}, - year = {2021}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {28}, - pages = {566--579}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.06.020}, - urldate = {2021-07-05} -} - -@book{Ashby2013, - title = {Materials and Design: The Art and Science of Material Selection in Product Design}, - author = {Ashby, Michael F and Johnson, Kara}, - year = {2013}, - publisher = {{Butterworth-Heinemann}}, - urldate = {2021-01-15} -} - -@article{Ashford2011, - title = {The Importance of Regulation-Induced Innovation for Sustainable Development}, - author = {Ashford, Nicholas A. and Hall, Ralph P.}, - year = {2011}, - month = jan, - journal = {Sustainability}, - volume = {3}, - number = {1}, - pages = {270--292}, - issn = {20711050}, - doi = {10.3390/su3010270}, - urldate = {2020-05-10}, - abstract = {This article explores the complex relationship between environmental regulation, innovation, and sustainable development within the context of an increasingly globalizing economy. The economic development, environment, and employment aspects of sustainable development are emphasized. We contend that the most crucial problem in achieving sustainability is lock-in or path dependency due to (1) the failure to envision, design, and implement policies that achieve co-optimization, or the mutually reinforcing, of social goals, and (2) entrenched economic and political interests that gain from the present system and advancement of its current trends. The article argues that industrial policy, environmental law and policy, and trade initiatives must be 'opened up' by expanding the practice of multi-purpose policy design, and that these policies must be integrated as well. Sustainable development requires stimulating revolutionary technological innovation through environmental, health, safety, economic, and labor market regulation. Greater support for these changes must also be reinforced by 'opening up the participatory and political space' to enable new voices to contribute to integrated thinking and solutions. \textcopyright{} 2011 by the authors.}, - keywords = {Co-optimization,Economic development,Employment,Environment,Health and safety,Innovation,Lock-in,Path dependency,Policy integration,Regulation,Sustainability,Sustainable development,System changes,Trade}, - file = {/Users/fabio/Zotero/storage/QLJK96QS/full-text.pdf} -} - -@article{Ashkenazi2019, - title = {How Aluminum Changed the World: {{A}} Metallurgical Revolution through Technological and Cultural Perspectives}, - author = {Ashkenazi, Dana}, - year = {2019}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {143}, - pages = {101--113}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.03.011}, - urldate = {2020-05-21}, - abstract = {The history of aluminum is rather short since it was discovered only in the nineteenth century, yet it has become an important part of everyday life. This article reviews the history of aluminum through technological breakthroughs as well as from cultural and social perspectives, beginning with its discovery, through the nineteenth and twentieth centuries until today; and aims to suggest possible future trends and applications for aluminum alloys. Aluminum has a high strength-to-weight ratio combined with excellent thermal conductivity and good corrosion resistance. Therefore, aluminum is an attractive material for many applications, including transportation, electrical and packaging industries, architecture, and food industries. It is also a recyclable metal, which provides both environmental and economic advantages. The commercial use of aluminum started at the end of the nineteenth century and continues to grow today with the development of new advanced aluminum alloys. Consequently, from a cultural perspective, aluminum is considered a symbol of modernity. Technological breakthroughs generate economic growth and social benefits. Present applications of aluminum include new choices, such as 3D printing, composite materials, nano-rods, biomedicine devices and aerospace uses. Based on the excellent properties of aluminum, its low price, combined with its significant scrap value and a growing recycling market, as well as its accelerating global production, it is expected that the aluminum industries will considerably grow through the twenty-first century and aluminum will continue to be a major part of our everyday culture. Therefore, based on the increasing growth of aluminum production and consumption, additional research and development effort is needed in the following years to minimize the negative environmental side effects associated with the technological developments related to aluminum production and at the same time creating further technological innovation.}, - keywords = {Advanced applications,Aluminum,History of science,Material culture,Technological forecasting,Technological innovation} -} - -@article{Ashrafi2019, - title = {Corporate Sustainability in {{Canadian}} and {{US}} Maritime Ports}, - author = {Ashrafi, Mehrnaz and Acciaro, Michele and Walker, Tony R. and Magnan, Gregory M. and Adams, Michelle}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {386--397}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.098} -} - -@article{Ashton2015, - title = {Recycling Polymeric Multi-Material Products through Micronization}, - author = {Ashton, Elisa G. and Kindlein, Wilson and Demori, Renan and C{\^a}ndido, Luis Henrique A and Mauler, Raquel}, - year = {2016}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {116}, - pages = {268--278}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2016.01.018}, - abstract = {The increasing usage of polymeric materials and the greater range of requirements in product design lead to the combined use of more than one material in the same product, component, the so-called multi-material products. These products represent a risk for the environment, as they make the conventional recycling process more complicated. The main problem in recycling polymeric multi-material products is related to the difficulty in separating their components. Thus, it is necessary to find solutions to allow multi-material recycling without the need to separate these materials. In this context, this study aimed to analyze the technical feasibility for the application of micronization in recycling polymeric multi-material products and to evaluate the potential of the resulting materials for use in new products. Therefore, a theoretical part, focusing on polymeric multi-material products and micronization, and a practical study, consisting of multi-material toothbrushes recycled via micronization, were presented. The experimental investigation involved the micronization of multi-material toothbrushes, followed by extrusion and injection molding. Subsequently, the resulting material was evaluated using scanning electron microscopy (SEM), tensile strength test and dynamic mechanical thermal analysis (DMTA). The results showed that micronization is a potential process to promote the recycling of multi-material products, and there was no degradation during the process. The recycled micronized material had a low level of interaction with the LLDPE matrix, which affected the elongation at break, causing loss of ductility and tenacity compared to virgin LLDPE. However, it did not affect the tensile strength, which presented an increase of 18.43\% compared to the reference. Despite better performance in tensile strength, the recycled sample showed an intense decrease in the storage modulus in temperatures above 30 \textdegree C. This may limit the use of these materials in certain products. Based on the results obtained, it can be concluded that the resulting material has potential applications in new products.}, - keywords = {Micronization,Polymeric multi-material products,Recycling,Sustainability}, - file = {/Users/fabio/Zotero/storage/G4NJSUWX/Recycling polymeric multi-material products through micronization.pdf} -} - -@article{asifESGIndustryRole2023, - title = {{{ESG}} and {{Industry}} 5.0: {{The}} Role of Technologies in Enhancing {{ESG}} Disclosure}, - shorttitle = {{{ESG}} and {{Industry}} 5.0}, - author = {Asif, Muhammad and Searcy, Cory and Castka, Pavel}, - year = {2023}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {195}, - pages = {122806}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122806}, - urldate = {2023-08-31}, - abstract = {Environmental, social, and governance (ESG) is increasingly being used to evaluate the performance of firms and pension funds, guide investment decision-making, and inform customer purchasing. Research on ESG is still evolving. Although a few studies have investigated the role of individual technologies (e.g., blockchain) in ESG, applying a broader set of emerging technologies in improving ESG disclosure and addressing its limitations is yet to be explored. Industry 5.0 offers a powerful framework for understanding the role of technologies in enhancing ESG disclosure. This conceptual paper explains ESG from the lens of management theories and views, including stakeholder theory, legitimacy theory, transaction cost economics theory, institutional theory, signaling theory, network economics theory, and the decoupling view. It then explores the application of I5.0 in enhancing ESG disclosure. The underlying values of I5.0 align with those of ESG, and I5.0 can support ESG functionalities. I5.0 is particularly useful in enhancing ESG disclosure authenticity, extending ESG disclosure from retrospective to prospective and real-time reporting, customizing ESG reports, extending the scope of reporting to multi-tier supply chains, reducing ESG cost, and enhancing the overall efficacy of ESG disclosure. The paper also sheds light on governance aspects, challenges, and risks of employing I5.0 to ESG.}, - keywords = {ESG,ESG governance,Industry 5.0,Reporting authenticity,Sustainability}, - file = {/Users/fabio/Zotero/storage/TUYVKAY6/S0040162523004912.html} -} - -@article{asifMethodologicalApproachDesign2021, - title = {A Methodological Approach to Design Products for Multiple Lifecycles in the Context of Circular Manufacturing Systems}, - author = {Asif, Farazee M.A. and Roci, Malvina and Lieder, Michael and Rashid, Amir and Miheli{\v c}, Ale{\v s} and Kotnik, Simon}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {296}, - pages = {126534}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126534}, - urldate = {2021-03-14}, - file = {/Users/fabio/Zotero/storage/2BR6S2N6/full-text.pdf} -} - -@article{Askari2020, - title = {Additive Manufacturing of Metamaterials: {{A}} Review}, - author = {Askari, Meisam and Hutchins, David A. and Thomas, Peter J. and Astolfi, Lorenzo and Watson, Richard L. and Abdi, Meisam and Ricci, Marco and Laureti, Stefano and Nie, Luzhen and Freear, Steven and Wildman, Ricky and Tuck, Christopher and Clarke, Matt and Woods, Emma and Clare, Adam T.}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101562}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101562}, - urldate = {2020-09-23}, - abstract = {Metamaterials exhibit properties beyond those exhibited by conventional materials in conventional scenarios. These have been investigated both theoretically and experimentally at length. In many cases the underpinning physical understanding of metamaterials has greatly preceded our ability to manufacture constituent structures. However, the development of additive manufacturing techniques gives new possibilities for the fabrication of complex metamaterial structures, many of which cannot be realised through conventional fabrication methods. The literature to date contains contributions from a diverse group of researchers from the physical sciences, mathematics, and manufacturing technology in the creation of metamaterials for electromagnetic, acoustic and mechanical applications. It is proposed that additive manufacturing holds the key to realise the capabilities of this vibrant research community and permit the creation of new paradigms in fundamental structures but also exploitation through application. For this purpose, a literature review is presented which identifies key advances in metamaterials alongside additive manufacturing and proposes new opportunities for researchers to work together through intra/inter disciplinary research to realise structures which exhibit extraordinary behaviour(s). This review represents a comprehensive account of the state-of-the-art in the production of such metamaterials using additive manufacturing methods and highlights areas, which, based on trends observed in the literature, are worthy of further research and require a coordinated effort on behalf of the afore mentioned disciplines in order to advance the state-of-the-art.}, - keywords = {Acoustic,Additive manufacturing,Crystals auxetic,Metamaterials,Optical,Phononic,Photonic} -} - -@article{asl-najafiNovelPerspectiveClosedloop2020, - title = {A Novel Perspective on Closed-Loop Supply Chain Coordination: {{Product}} Life-Cycle Approach}, - author = {{Asl-Najafi}, Javad and Yaghoubi, Saeed}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125697}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125697}, - urldate = {2021-01-01} -} - -@article{asplundGenesisPublicprivateInnovation2021, - title = {The Genesis of Public-Private Innovation Ecosystems: {{Bias}} and Challenges\ding{80}}, - author = {Asplund, Fredrik and Bj{\"o}rk, Jennie and Magnusson, Mats and Patrick, Adam J.}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120378}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120378}, - urldate = {2020-10-19}, - abstract = {The emergence of technology increasingly depends on innovation ecosystems and frequently involves actors from both industry and academia. However, value creation may experience challenges due to bias formed during public-private innovation ecosystem genesis. This empirical study of bias in a new pan-European public-private initiative provides results regarding innovation ecosystems and the individuals typically active during their genesis: value creation is biased towards the selection of incumbent firms and complement challenges, and participation is biased towards engineers with knowledge of exploitation from multiple domains and researchers with knowledge of exploitation from single domains. This suggests that the implications of the loose coupling emphasised by the innovation ecosystems discourse and the knowledge of the different contexts in which firms capture value are more complex than previously acknowledged. The practical implications are that the ability of public innovation ecosystem leadership to act early on novel technology might be offset by the inability of involved firms to commit to bringing the technology to market and that individuals typically active during public-private innovation ecosystems genesis are not ideal for handling this challenge. In fact, increasingly connected public leadership could smother the innovation ecosystem unless well-connected and multidisciplinary researchers are brought in as brokers.}, - keywords = {Application domains,Cyber-physical systems,Ecosystem genesis,Innovation ecosystems,Loose coupling,Public-private cooperation}, - file = {/Users/fabio/Zotero/storage/LWPTQKYU/full-text.pdf} -} - -@article{assaLessMoreImplicit2021, - title = {Less Is More: {{The}} Implicit Sustainability Content of the Human Development Index}, - author = {Assa, Jacob}, - year = {2021}, - month = jul, - journal = {Ecological Economics}, - volume = {185}, - pages = {107045}, - publisher = {{Elsevier B.V.}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107045}, - urldate = {2021-04-29}, - abstract = {Sustainability is often defined narrowly using environmental dimensions, and efforts to `green' the HDI usually involve adding such indicators. We take a broader view of sustainability as the relative efficiency of converting commodities into capabilities. This implies that no new indicators need to be added to the HDI, but instead its functional form has to change. We examine another index which uses a relative definition of sustainability - Hickel's SDI - but show how it is not an index of human development as it does not account for absolute achievements in any dimension. Building on Sen's theory of commodities and capabilities, we define a class of development indices which includes the HDI as a special case. Combining the relativity of sustainability with absolute achievements, we derive a new member of this class - the Sustainable Human Development Index (SHDI). Finally, we compare HDI, SDI and SHDI empirically and demonstrate that SHDI offers the best of both worlds. SHDI correlates positively with capabilities but demotes underachievers - countries achieving less than their income would imply - while promoting `over-achievers' and more environmentally-friendly countries. Thus, SHDI provides policy incentives which are more suitable for sustainable human development than either HDI or SDI.}, - keywords = {Composite indices,Human development,Sustainability} -} - -@misc{ASTM-F3049, - title = {Standard {{Guide}} for {{Characterizing Properties}} of {{Metal Powders Used}} for {{Additive Manufacturing Processes}}}, - author = {{ASTM International}}, - year = {2014} -} - -@misc{ASTM2012, - title = {F2792-12a {{Standard Terminology}} for {{Additive Manufacturing Technologies}}}, - author = {{American Society for Testing and Materials}}, - year = {2012}, - pages = {25--27}, - doi = {10.1520/F2792-12A}, - file = {/Users/fabio/Zotero/storage/SFFSN8QG/F2792-12a Standard Terminology for Additive Manufacturing Technologies.pdf} -} - -@article{ASTM2015, - title = {Standard {{Terminology}} for {{Additive Manufacturing}} \textendash{} {{General Principles}} \textendash{} {{Terminology}}}, - author = {{ASTM}}, - year = {2015}, - journal = {ASTM International}, - volume = {i}, eprint = {1011.1669v3}, - pages = {1--9}, - issn = {1882-675X}, - doi = {10.1520/F2792-12A.2}, - abstract = {This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with additive-manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, re- searchers, educators, press/media and others}, + pages = {31--39}, + issn = {0888-0395}, + doi = {10.1108/01409170410784185}, + abstract = {This article offers support and guidance for students undertaking a literature review as part of their dissertation during an undergraduate or Masters course. A literature review is a summary of a subject field that supports the identification of specific research questions. A literature review needs to draw on and evaluate a range of different types of sources including academic and professional journal articles, books, and web-based resources. The literature search helps in the identification and location of relevant documents and other sources. Search engines can be used to search web resources and bibliographic databases. Conceptual frameworks can be a useful tool in developing an understanding of a subject area. Creating the literature review involves the stages of: scanning, making notes, structuring the literature review, writing the literature review, and building a bibliography.}, archiveprefix = {arxiv}, - isbn = {9781493921126}, - pmid = {15003161}, - file = {/Users/fabio/Zotero/storage/XVHMSX3K/Standard Terminology for Additive Manufacturing – General Principles – Terminology.pdf} -} - -@article{astrupRecyclingPlasticAccounting2009, - title = {Recycling of Plastic: Accounting of Greenhouse Gases and Global Warming Contributions}, - shorttitle = {Recycling of Plastic}, - author = {Astrup, Thomas and Fruergaard, Thilde and Christensen, Thomas H.}, - year = {2009}, - month = nov, - journal = {Waste Management \& Research}, - volume = {27}, - number = {8}, - pages = {763--772}, - publisher = {{SAGE Publications Ltd STM}}, - issn = {0734-242X}, - doi = {10.1177/0734242X09345868}, - urldate = {2023-08-21}, - abstract = {Major greenhouse gas (GHG) emissions related to plastic waste recycling were evaluated with respect to three management alternatives: recycling of clean, single-type plastic, recycling of mixed/contaminated plastic, and use of plastic waste as fuel in industrial processes. Source-separated plastic waste was received at a material recovery facility (MRF) and processed for granulation and subsequent downstream use. In the three alternatives, plastic was assumed to be substituting virgin plastic in new products, wood in low-strength products (outdoor furniture, fences, etc.), and coal or fuel oil in the case of energy utilization. GHG accounting was organized in terms of indirect upstream emissions (e.g. provision of energy, fuels, and materials), direct emissions at the MRF (e.g. fuel combustion), and indirect downstream emissions (e.g. avoided emissions from production of virgin plastic, wood, or coal/oil). Combined, upstream and direct emissions were estimated to be roughly between 5 and 600 kg CO2-eq. tonne \textemdash 1 of plastic waste depending on treatment at the MRF and CO2 emissions from electricity production. Potential downstream savings arising from substitution of virgin plastic, wood, and energy fuels were estimated to be around 60\textemdash{} 1600 kg CO2-eq. tonne \textemdash 1 of plastic waste depending on substitution ratios and CO2 emissions from electricity production. Based on the reviewed data, it was concluded that substitution of virgin plastic should be preferred. If this is not viable due to a mixture of different plastic types and/or contamination, the plastic should be used for energy utilization. Recycling of plastic waste for substitution of other materials such as wood provided no savings with respect to global warming.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/M2NBNEPN/Astrup et al_2009_Recycling of plastic.pdf} -} - -@book{atanackovicTheoryElasticityScientists2000, - title = {Theory of {{Elasticity}} for {{Scientists}} and {{Engineers}}}, - author = {Atanackovic, Teodor M. and Guran, Ard{\'e}shir}, - year = {2000}, - publisher = {{Birkh\"auser Boston}}, - address = {{Boston, MA}}, - doi = {10.1007/978-1-4612-1330-7}, - urldate = {2023-09-13}, - isbn = {978-1-4612-7097-3 978-1-4612-1330-7}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/FBF9CQA5/Atanackovic y Guran - 2000 - Theory of Elasticity for Scientists and Engineers.pdf} -} - -@article{Athar2019, - title = {A Review of Inherent Assessment for Sustainable Process Design}, - author = {Athar, Muhammad and Shariff, Azmi Mohd and Buang, Azizul}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {233}, - pages = {242--263}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.060}, - urldate = {2020-05-21}, - abstract = {Chemical process manufacturing is associated with risks, which cannot be eliminated. Anyhow, controlling or minimizing of risks is possible up to a certain extent through various process safety strategies. Among these strategies, the inherent approach offers a sustainable process design. This review aims to offer an extensive survey regarding the bibliometrics and the features of the state-of-the-art inherent assessment methods. For the bibliometric part, numerous trends like publication trend, authors and geographical cooperation and prominent keywords are presented using the VOSviewer software. For the second intention, the scope and features of inherent assessments methods for sustainable process design are discussed in addition to the historical development of these methods. The techniques are categorized among seven groups based on the method adopted for inherent assessment along with the benefits and detriments of each group. It is revealed that initially, the inherent assessment has focused on the comparison of various process routes, whereas, the modern methods intend to minimize the risk. Furthermore, it is recognized that the process equipment approach is not much explored yet, which may improve the sustainable process designing via the equipment characteristics. Finally, the limitations of present schemes and future research directions for inherent assessment implications in the sustainable process design are also highlighted, such that the objectives of economic, healthier, safer and environmental-friendly process plants can be materialized.}, - keywords = {Bibliometrics,Environment,Inherent assessment,Occupational health,Process safety,Sustainable process design} -} - -@article{atiaseEmergenceStrategyTech2020, - ids = {Atiase2020}, - title = {The Emergence and Strategy of Tech Hubs in {{Africa}}: {{Implications}} for Knowledge Production and Value Creation}, - author = {Atiase, Victor Yawo and Kolade, Oluwaseun and Liedong, Tahiru Azaaviele}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120307}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120307}, - urldate = {2020-09-21} -} - -@article{AtifYardimci1996, - title = {Conceptual Framework for the Thermal Process Modelling of Fused Deposition}, - author = {Atif Yardimci, M. and G{\"u}{\c c}eri, Sel{\c c}uk}, - year = {1996}, - month = jun, - journal = {Rapid Prototyping Journal}, - volume = {2}, - number = {2}, - pages = {26--31}, - issn = {1355-2546}, - doi = {10.1108/13552549610128206}, - urldate = {2015-03-05}, - isbn = {1355254051}, - file = {/Users/fabio/Zotero/storage/WSW3XR9G/Atif Yardimci, Güçeri - 1996 - Conceptual framework for the thermal process modelling of fused deposition.pdf} -} - -@article{Atkinson2006, - title = {Do It Yourself: {{Democracy}} and Design}, - author = {Atkinson, Paul}, - year = {2006}, - journal = {Journal of Design History}, - volume = {19}, - number = {1}, - pages = {1--10}, - issn = {09524649}, - doi = {10.1093/jdh/epk001}, - abstract = {Slideshow of exhibition accompanying the publication of the Special Issue of the Journal of Design History of the same title.}, - isbn = {0952-4649}, - pmid = {24065043}, - file = {/Users/fabio/Zotero/storage/9X8ZGPZV/Do It Yourself- Democracy and Design.pdf} -} - -@article{Attwood2006, - title = {The Effects of Ageing by Ultraviolet Degradation of Recycled Polyolefin Blends}, - author = {Attwood, J. and Philip, M. and Hulme, A. and Williams, G. and Shipton, P.}, - year = {2006}, - journal = {Polymer Degradation and Stability}, - volume = {91}, - number = {12}, - pages = {3407--3415}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2006.04.025}, - abstract = {Products manufactured from recycled polyolefin blends were subjected to accelerate weathering conditions and subsequent tests. Field-aged products were also tested. Samples were analysed for changes in mechanical, rheological and chemical properties. Data obtained in this study, by means of tensile, impact, and melt flow tests, GPC, gloss and colour analyses showed that the effect of UV exposure, whether in the field or artificial environments, was not significant as far as the mechanical properties of the materials were concerned. There was some change in the surface characteristics but such surface effects would not compromise the mechanical integrity of the product when recycled. During reprocessing of the materials, it is likely that stabilizer is redistributed at the surface of any new moulding, thus renewing the surface characteristics. Hence damaged or end-of-life products need not be discounted from recycling. ?? 2006.}, - isbn = {0141-3910}, - keywords = {Accelerated weathering,Plastics,Recycled polyolefin,Ultraviolet degradation}, - file = {/Users/fabio/Zotero/storage/WMQHGUJU/Attwood et al. - 2006 - The effects of ageing by ultraviolet degradation of recycled polyolefin blends.pdf} -} - -@article{Atzeni2012, - title = {Economics of Additive Manufacturing for End-Usable Metal Parts}, - author = {Atzeni, Eleonora and Salmi, Alessandro}, - year = {2012}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {62}, - number = {9-12}, - pages = {1147--1155}, - issn = {02683768}, - doi = {10.1007/s00170-011-3878-1}, - abstract = {Additive manufacturing (AM) of metal parts combined with part redesign has a positive repercussion on cost saving. In fact, a remarkable cost reduction can be obtained if the component shape is modified to exploit AM potentialities. This paper deals with the evaluation of the production volume for which AM techniques result competitive with respect to conventional processes for the production of end-usable metal parts. For this purpose, a comparison between two different technologies for metal part fabrication, the traditional high-pressure die-casting and the direct metal laser sintering additive technique, is done with consideration of both the geometric possibilities of AM and the economic point of view. A design for additive manufacturing approach is adopted. Costs models of both processes are identified and then applied to an aeronautical component selected as case study. This research evidences that currently additive techniques can be economically convenient and competitive to traditional processes for small to medium batch production of metal parts. \textcopyright{} 2012 Springer-Verlag London Limited.}, - isbn = {02683768 (ISSN)}, - keywords = {Additive manufacturing,Cost analysis,Design for additive manufacturing,DMLS,Metal parts}, - file = {/Users/fabio/Zotero/storage/W9XJYGIX/Economics of additive manufacturing for end-usable metal parts.pdf} -} - -@article{aubinPlasticsCircularEconomy2022, - ids = {aubin2022a}, - title = {Plastics in a Circular Economy: {{Mitigating}} the Ambiguity of Widely-Used Terms from Stakeholders Consultation}, - author = {Aubin, Sophie and Beaugrand, Johnny and Berteloot, Marie and Boutrou, Rachel and Buche, Patrice and Gontard, Nathalie and Guillard, Val{\'e}rie}, - year = {2022}, - month = aug, - journal = {Environmental Science \& Policy}, - volume = {134}, - pages = {119--126}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.04.011}, - urldate = {2022-05-23}, - file = {/Users/fabio/Zotero/storage/JS4KPGJM/Aubin et al. - 2022 - Plastics in a circular economy Mitigating the amb.pdf} -} - -@article{aubouinGestionCommunautesConnaissances2019, - title = {La Gestion Des Communaut\'es de Connaissances Au Sein Des Espaces de Cr\'eativit\'e et Innovation~: Une Vari\'et\'e de Logiques de Collaboration}, - author = {Aubouin, Nicolas and Capdevila, Ignasi}, - year = {2019}, - journal = {Innovations}, - volume = {58}, - number = {1}, - pages = {105--134}, - publisher = {{De Boeck Sup\'erieur}}, - issn = {1267-4982}, - doi = {10.3917/INNO.058.0105}, - urldate = {2022-01-05}, - abstract = {\&\#192; travers l\&\#8217;\&\#233;tude compar\&\#233;e des formes de collaboration au sein de diff\&\#233;rents espaces de cr\&\#233;ativit\&\#233; et d\&\#8217;innovation, cet article propose une grille de lecture des communaut\&\#233;s de connaissances se d\&\#233;veloppant en lien avec des lieux innovants. Ainsi trois types de collaboration peuvent se distinguer selon qu\&\#8217;ils soient centr\&\#233;s sur des logiques \&\#233;conomiques (r\&\#233;duction des co\&\#251;ts et renouvellement des logiques de travail), sur des logiques utilitaristes (partage des ressources et des moyens de travail) ou sur des logiques altruistes (valeur d\&\#8217;entraide et de partage fond\&\#233;e sur le don/contre-don). Chacune met alors en \&\#233;vidence des caract\&\#233;ristiques sp\&\#233;cifiques de chaque espace d\&\#8217;innovation et ouvre la r\&\#233;flexion sur l\&\#8217;enjeu central de l\&\#8217;animation, voire du pilotage des communaut\&\#233;s autour de ces trois logiques de collaboration. Codes JEL\&\#160;: O31, L26}, - keywords = {Case Studies,Collaboration,Innovation and Creativity Spaces,Knowledge Communities,Typology} -} - -@techreport{Audretsch2020, - title = {Innovative Start-Ups and Policy Initiatives}, - author = {Audretsch, David and Colombelli, Alessandra and Grilli, Luca and Minola, Tommaso and Rasmussen, Einar}, - year = {2020}, - month = jul, - journal = {Research Policy}, - pages = {104027}, - institution = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104027}, - urldate = {2020-08-01}, - abstract = {Innovative start-ups can create and shape new industries and generate considerable economic and societal impacts. Accordingly, a variety of policy initiatives are aimed at promoting the establishment, growth and impact of innovative start-ups. Designing such policies is a challenging task, because most start-ups fail. In addition, only a small share of those start-ups will ultimately prove to be innovative, and very few of those will eventually become high impact firms. Hence, effective policies require a better understanding of the processes by which innovative start-ups are formed, developed and create impact, as well as of the heterogeneous nature inherent to innovative start-ups along with their development trajectory. This article reviews 39 policy initiatives from around the world and classifies their approaches to the phenomenon of innovative start-ups. By relying on insights from the papers mentioned in this special issue, we develop a process framework by elaborating on (i) the antecedents of the creation of innovative start-ups, (ii) their founding characteristics, (iii) their behavior, and finally (iv) the outputs and impacts generated by them. Our framework highlights how policy initiatives, managerial issues and research approaches are conceptually different, depending on the specific stage of firm development. We conclude with implications for policy initiatives and further research.}, - keywords = {Entrepreneurial process,Entrepreneurship policy,Innovative start-up} -} - -@article{audretschLimitsOpenInnovation2022, - title = {The Limits to Open Innovation and Its Impact on Innovation Performance}, - author = {Audretsch, B. David and Belitski, Maksim}, - year = {2022}, - month = mar, - journal = {Technovation}, - pages = {102519}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2022.102519}, - urldate = {2022-04-11} -} - -@article{auerQualityAspectsCompounding2023, - title = {Quality {{Aspects}} in the {{Compounding}} of {{Plastic Recyclate}}}, - author = {Auer, Maximilian and Schmidt, Jannick and Diemert, Jan and Gerhardt, Gabriel and Renz, Maximilian and Galler, Viola and Woidasky, J{\"o}rg}, - year = {2023}, - month = feb, - journal = {Recycling}, - volume = {8}, - number = {1}, - pages = {18}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2313-4321}, - doi = {10.3390/recycling8010018}, - urldate = {2023-02-09}, - abstract = {Compounding is the final processing step for quality adjustment and control before recycled thermoplastic polymer material can be introduced into production processes. Motivated by the need for higher recyclate shares, the research question is which quality problems recycling compounders are encountered in practice, where they occur, and which mitigation options might be reasonable. Therefore, an online survey with 20 recycling compounders based in Germany was conducted asking about typical processing steps and processed materials, test procedures for quality assurance, quality problems, and possibilities for reducing quality problems. Results show that compounders mainly name impurities and contaminations of the input material as challenging and the reason for quality problems. The study shows that the problems are not dependent on the material input type. Quality problems occur along the entire secondary value chain, with companies manufacturing components themselves being particularly affected. The composition determination of the input materials helps to minimize quality problems.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {circular economy,compounding,material properties,plastic,polymer testing,quality assurance,recycling,thermoplastic material}, - file = {/Users/fabio/Zotero/storage/PVZG2YBL/Auer et al. - 2023 - Quality Aspects in the Compounding of Plastic Recy.pdf} -} - -@inproceedings{Auhl2019, - title = {{{3D-printing}} Quality in Relation to Melt Flow and Fusion Behavior of Polymer Materials}, - author = {Auhl, Dietmar and Rohnstock, Falk and L{\"o}schke, Oliver and Sch{\"a}fer, Konstanze and Wang, Peng and Wagner, Manfred H.}, - year = {2019}, - pages = {030004}, - doi = {10.1063/1.5109498} -} - -@book{Auras2010, - ids = {Auras2010a}, - title = {Poly({{Lactic Acid}})}, - editor = {Auras, Rafael and Lim, Loong-Tak and Selke, Susan E. M. and Tsuji, Hideto}, - year = {2010}, - month = sep, - publisher = {{John Wiley \& Sons, Inc.}}, - address = {{Hoboken, NJ, USA}}, - doi = {10.1002/9780470649848}, - urldate = {2014-07-30}, - abstract = {This book describes the synthesis, properties, and processing methods of poly(lactic acid) (PLA), an important family of degradable plastics. As the need for environmentally-friendly packaging materials increases, consumers and companies are in search for new materials that are largely produced from renewable resources, and are recyclable. To that end, an overall theme of the book is the biodegradability, recycling, and sustainability benefits of PLA. The chapters, from a base of international expert contributors, describe specific processing methods, spectroscopy techniques for PLA analysis, and and applications in medical items, packaging, and environmental use.}, - isbn = {978-0-470-64984-8}, - file = {/Users/fabio/Zotero/storage/9BEP9YPA/Unknown - 2010 - Poly(Lactic Acid).pdf} -} - -@article{Austen1981, - title = {Prologue {{The Card Catalogue Did}} He Appear a Sensible Young Man; a Young Man of Information?}, - author = {Austen, Jane}, - year = {1981}, - pages = {7--38}, - file = {/Users/fabio/Zotero/storage/33VKTBH3/m-api-0ce6e50a-8f22-a6a1-4884-1e8c882957b4.pdf} -} - -@article{avila-robinsonExploringKnowledgeBase2022, - title = {Exploring the Knowledge Base of Innovation Research: {{Towards}} an Emerging Innovation Model}, - shorttitle = {Exploring the Knowledge Base of Innovation Research}, - author = {{\'A}vila-Robinson, Alfonso and Islam, Nazrul and Sengoku, Shintaro}, - year = {2022}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {182}, - pages = {121804}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.121804}, - urldate = {2022-08-11}, - abstract = {This study provides a systematic review of the literature on innovation research (IR) over the past two decades. We used data-driven approaches integrating network and natural language processing techniques on 41 innovation core and ancillary journals to characterize the IR landscape. Contrary to previous efforts, we explored knowledge in the whole IR field from general and specific patterns of growth and interaction using cluster-and term-based data and macro-and micro-level perspectives, respectively. Our results helped us uncover the changing features of the IR landscape in recent years: (i) a strong move into social-and sustainability-driven innovation; (ii) the merging of products and services into business model innovation; (iii) the more influential role of stakeholders such as the government and the general public; (iv) the use of global analytical perspectives while considering local contexts; (v) the importance of greater visions ``pulling'' innovation; (vi) the greater role of ``soft'' issues such as behaviors; and (vi) a shift into sectoral, geographical, and methodological diversification. Building on these aspects, we developed an emerging model for future innovation research and a series of IR propositions. Our findings help generate opportunities to build future innovation capabilities in research, practice, and education.}, - langid = {english}, - keywords = {Bibliometrics,Innovation model,Innovation research,Knowledge base,Networks}, - file = {/Users/fabio/Zotero/storage/J7X5KA6X/Ávila-Robinson et al_2022_Exploring the knowledge base of innovation research.pdf;/Users/fabio/Zotero/storage/6HSF2Y33/S0040162522003286.html} -} - -@article{Avila2003, - title = {A Dual Analysis for Recycled Particulate Composites: {{Linking}} Micro- {{And}} Macro-Mechanics}, - author = {Avila, Antonio F. and Rodrigues, P. C M and Santos, Dagoberto B. and Faria, A. C A}, - year = {2003}, - journal = {Materials Characterization}, - volume = {50}, - number = {4-5}, - pages = {281--291}, - issn = {10445803}, - doi = {10.1016/S1044-5803(03)00124-4}, - abstract = {The large amount of disposable bottles produced nowadays makes imperative the search for alternative procedures for recycling them since they are not biodegradable. This paper takes into consideration the thermomechanical recycling of post-consumed plastic bottles, especially the ones made of polyethylene terephthalate (PET) and high-density polyethylene (HDPE), and their use as composite materials for engineering applications. As changes on the composite's microstructure can have an influence on macroscopic behavior, a new type of analysis is needed. To be able to evaluate the composite performance, a dual analysis procedure was developed. It consists of a micro-mechanical analysis where the microstructure is observed by optical microscopy, and variations in morphology are related to composite overall mechanical behavior. The macro-mechanical analysis is performed by ASTM D 3039/3039 M tensile tests. By doing this, the composite effective moduli can be determined. The new composite seems to be encouraging, i.e., an HDPE/PET composite with 40:60 ratio, in weight, experiments a stiffness recovery from the third to the fourth recycle. Moreover, the dual analysis was able to capture this variation. ?? 2003 Elsevier Inc. All rights reserved.}, - keywords = {Composite materials,Dual analysis,Macro-mechanics,Micro-mechanics}, - file = {/Users/fabio/Zotero/storage/FJITBMPB/Avila et al. - 2003 - A dual analysis for recycled particulate composites Linking micro- And macro-mechanics.pdf} -} - -@article{Awaja2005, - title = {Recycling of {{PET}}}, - author = {Awaja, Firas and Pavel, Dumitru}, - year = {2005}, - journal = {European Polymer Journal}, - volume = {41}, - number = {7}, - pages = {1453--1477}, - issn = {00143057}, - doi = {10.1016/j.eurpolymj.2005.02.005}, - abstract = {The recycling of post-consumer PET (POSTC-PET) as a technology is a cross-disciplinary practice with many fields of science involved. These include polymer chemistry and physics, process engineering and manufacturing engineering. This paper presents a concise background of the current state of knowledge with respect to POSTC-PET recycling covering the disciplines mentioned above. In the first section of this paper, a brief background is presented about virgin PET synthesis, thermal transitions, processing and applications. The second section covers the PET recycling process with a focus on contamination and ways to increase the molecular weight of recycled PET (R-PET). It serves as an introduction to Section 3 where the chain extension process is described in detail. In Section 3, the current understanding of chain extenders, chain extension experimentation variables and equipment is reviewed. Reactive extrusion process is described in Section 4 with a special focus on system stability under chain extension conditions. Section 5 covers the effect of chain extension on R-PET thermal transitions and crystallinity. Section 6 presents the injection stretch blow moulding (ISBM) process as a possible application for R-PET with a focus on preform and bottle moulding. The last section gives a description of FT-IR technology to detect bottles' orientation and conformation changes. ?? 2005 Elsevier Ltd. All right reserved.}, - isbn = {0014-3057}, - pmid = {6663}, - keywords = {FT-IR,ISBM,PET,Reactive extrusion}, - file = {/Users/fabio/Zotero/storage/CLYJLSHE/Awaja, Pavel - 2005 - Recycling of PET.pdf} -} - -@article{Awan2019, - title = {Creativity Enables Sustainable Development: {{Supplier}} Engagement as a Boundary Condition for the Positive Effect on Green Innovation}, - author = {Awan, Usama and Sroufe, Robert and Kraslawski, Andrzej}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {226}, - pages = {172--185}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.308}, - urldate = {2020-03-22}, - abstract = {Despite the increasing awareness of business and academic research toward creative thinking, the investigation of its uptake by industry is still limited. Supplier engagement attracts considerable interest as a means to improve green innovation. Previous research studies in an inter-firm relationship have addressed the impact of green innovation on sustainability performance. While some studies have concluded that creative thinking can lead to sustainable performance outcomes, others have questioned the positive influence of creative thinking on innovation. This study takes a top-up perspective on ways to stimulate creative thinking with supplier engagement. Relying on the social capital theory and its wider contextualization in relation with the creativity, the authors argue that supplier engagement levers for driving green innovation and facilitates the sustainable development. We aim to advance understanding of the role of creativity, along with how and why creativity is important for the development of green innovation practices for a sustainable future. This study provides a more finegrained perspective by developing a theoretical model. Contributions from this study include research propositions to help explain and predict why and how firm resources become more important when combined with the creative thinking. Creative thinking is a fast-growing topic among the global community for the way that it enables sustainable development initiatives. Creativity boosts environmental, social and economic performance by enabling the development of green products and processes. Creative thinking has become an important tool driving green innovation within organizations and plays a critical role in enhancing sustainability performance. This study provides novel insights into how to organize creative abilities for sustainable development and provide actionable research direction and policy implications for both practitioners and academicians.} -} - -@article{awanIndustryCircularEconomy2022, - title = {Industry 4.0 and Circular Economy in an Era of Global Value Chains: {{What}} Have We Learned and What Is Still to Be Explored?}, - shorttitle = {Industry 4.0 and Circular Economy in an Era of Global Value Chains}, - author = {Awan, Usama and G{\"o}lgeci, Ismail and Makhmadshoev, Dilshod and Mishra, Nishikant}, - year = {2022}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {371}, - pages = {133621}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133621}, - urldate = {2022-08-22}, - abstract = {This article reviews the industry 4.0 (I4.0) and circular economy (CE) literature from a global value chain (GVC) perspective. More specifically, it (1) summarizes the empirical findings on the applications of I4.0 and CE practices; (2) explores the previous literature and identifies several future research directions to advance the existing literature. In this respect, the interface between I4.0 and CE research is a relatively young field of inquiry that has been little concerned with developments in GVCs. We systematically review 112 peer-reviewed papers in the field of I4.0 and CE to distill key future research opportunities and trends in the GVC field. We develop three specific conclusions from our literature review. First, GVCs can vary widely within the various forms of I4.0 technologies with the various CE practices. Second, GVC research is underdeveloped with regard to I4.0 and CE. Third, our findings are congruent with previously published studies, which recognize the importance of GVC research that has generated a rich body of knowledge, mainly from a governance perspective in operations management, supply chain management, and international business. Likewise, our study offers promising avenues for future research studies at the intersection of I4.0, CE, and GVCs. Our systematic literature review suggests that there are many opportunities to advance the I4.0 and CE debates in the burgeoning field of GVC.}, - langid = {english}, - keywords = {Circular economy,Global value chains,Industry 4.0,International business,Technological upgrading}, - file = {/Users/fabio/Zotero/storage/3U7DXEUC/Awan et al. - 2022 - Industry 4.0 and circular economy in an era of glo.pdf} -} - -@article{awasthiFusedDepositionModeling2021, - title = {Fused Deposition Modeling of Thermoplastic Elastomeric Materials: {{Challenges}} and Opportunities}, - author = {Awasthi, Pratiksha and Banerjee, Shib Shankar}, - year = {2021}, - month = oct, - journal = {Additive Manufacturing}, - volume = {46}, - pages = {102177}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102177}, - urldate = {2021-07-18} -} - -@article{Axon2020, - title = {The Socio-Cultural Dimensions of Community-Based Sustainability: {{Implications}} for Transformational Change}, - author = {Axon, Stephen}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {266}, - pages = {121933}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121933}, - urldate = {2020-05-23}, - abstract = {There is substantial difficulty with effectively, and meaningfully, engaging the public with community-based sustainability projects as a method to facilitate sustainable lifestyles. Individuals engage with community projects in numerous ways: cognitively (knowledge), affectively (emotions), and behaviourally (actions). One prevalent consideration that individuals consider is other peoples' (lack of) engagement; given that the success of community-based approaches addressing climate change is dependent upon the actions, and participation, of all local residents. Findings from focus groups in seven urban communities in the UK are presented that illustrate clear elements of `Othering' as part of individual engagements with community-based sustainability projects. Primarily, there is substantial consideration towards what other people within the community know, feel, and do to engage with community-based projects. Residents distinguish themselves in opposition to those they view as engaging, and not engaging, in the same way as themselves and indicate the need for equitable participation amongst all residents. These considerations have the potential to project particular barriers on wider community engagement if left to develop, cause tension, and are not resolved. Implications for participatory strategies to meaningfully and effectively engage individuals with community-based sustainability and transformational change are outlined. Insights into how considerations of `Othering' can be overcome so as not to cause negative engagements with other residents and attempts to live sustainably as part of a community approach are illustrated.}, - keywords = {Communities,Othering,Public engagement,Sustainability science,Sustainable lifestyles,Transformational change,Transformations}, - file = {/Users/fabio/Zotero/storage/FDLATN3L/full-text.pdf} -} - -@article{ayatiCircularSupplyChain2022, - title = {Toward a Circular Supply Chain: {{Understanding}} Barriers from the Perspective of Recovery Approaches}, - author = {Ayati, Mohammad S. and Shekarian, Ehsan and Majava, Jukka and W{\ae}hrens, Brian Vejrum}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {131775}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2022.131775}, - urldate = {2022-04-25} -} - -@article{Aydogan2018, - title = {Designing and Building a {{3D}} Printed Low Cost Modular {{Raman}} Spectrometer}, - author = {Aydogan, Onur and Tasal, Erol}, - year = {2018}, - volume = {2}, - number = {2}, - pages = {3--12}, - keywords = {3d printing,accepted,experimental innovation,july 2018,november 2018,raman spectrometer,raman spectroscopy,received}, - file = {/Users/fabio/Zotero/storage/QZ2M96GU/Designing and building a 3D printed low cost modular Raman spectrometer.pdf} -} - -@article{ayeleruChallengesPlasticWaste2020, - title = {Challenges of Plastic Waste Generation and Management in Sub-{{Saharan Africa}}: {{A}} Review}, - author = {Ayeleru, Olusola Olaitan and Dlova, Sisanda and Akinribide, Ojo Jeremiah and Ntuli, Freeman and Kupolati, Williams Kehinde and Marina, Paula Facal and Blencowe, Anton and Olubambi, Peter Apata}, - year = {2020}, - month = jun, - journal = {Waste Management}, - volume = {110}, - pages = {24--42}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.04.017}, - urldate = {2020-05-27}, - abstract = {Recently, the issues of land-based plastics and their associated challenges in the marine world have been widely publicised in the media and scientific literature. Thus far, despite these communications, there have been few reports that have focused on the issues that acute plastic waste generation and its poor management pose to human health and the global environment. Also, articles on ways to mitigate these issues particularly in sub-Saharan Africa have not been documented. Indeed, there is significant scope for improvements in plastic waste management in developing countries, which offer a wide range of economic and environmental benefits. Plastic waste generation in sub-Saharan Africa is dependent on many factors like urbanization, etc. Currently, the population of sub-Saharan Africa is around 1 billion as of the year 2019, the amount of generated waste is 180 million tonnes at the rate of 0.5\% per capita per day, the amount that is openly dumped is 70\% and the plastic waste generated annually is 17 million tonnes. Therefore, this study aims to provide an overview of the plastic lifecycle and problems associated with plastic waste management in sub-Saharan Africa, including current practices, public participation and opinion, and government regulations. In addition, this highlight aims to outline the impact of plastic waste proliferation on man and the environment; and the economic and environmental benefits of proper plastic waste management. Critical discussion of current processes and the suitability of potential solutions provide the basis for proposition on mitigation measures to avert the negative impact of plastic waste.}, - keywords = {Circular economy,Economic benefits,Environmental benefits,Health risk,Plastic waste management,Recycling} -} - -@article{Aykroyd2019, - title = {Recent Developments of Control Charts, Identification of Big Data Sources and Future Trends of Current Research}, - author = {Aykroyd, Robert G. and Leiva, V{\'i}ctor and Ruggeri, Fabrizio}, - year = {2019}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {144}, - pages = {221--232}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.01.005}, - urldate = {2020-05-10}, - abstract = {Control charts are one of the principal tools to monitor dynamic processes with the aim of rapid identification of changes in the behaviour of these processes. Such changes are usually associated with a move from an in-control condition to an out-of-control condition. The paper briefly reviews the historical origins and includes examples of recent developments, focussing on their use in fields different from the industrial applications in which they were initially derived and often employed. It also focusses on cases which depart from the commonly used Gaussian assumption and then considers potential effects of the big data revolution on future uses. A bibliometric analysis is also presented to identify distinct groups of research themes, including emerging and underdeveloped areas, which are hence potential topics for future research.}, - keywords = {Bibliometric analysis,Big data,Co-word analysis,Non-normality,R software,Statistical process control,Text-mining} -} - -@article{Ayre2018, - title = {Technology Advancing Polymers and Polymer Composites towards Sustainability: {{A}} Review}, - author = {Ayre, David}, - year = {2018}, - month = oct, - journal = {Current Opinion in Green and Sustainable Chemistry}, - volume = {13}, - pages = {108--112}, - issn = {24522236}, - doi = {10.1016/j.cogsc.2018.06.018} -} - -@article{Ayres2001, - title = {Strong versus Weak Sustainability: {{Economics}}, Natural Sciences, and "Consilience"}, - author = {Ayres, Robert U. and Van Den Bergh, Jeroen C.J.M. and Gowdy, John M.}, - year = {2001}, - journal = {Environmental Ethics}, - volume = {23}, - number = {2}, - pages = {155--168}, - issn = {01634275}, - doi = {10.5840/enviroethics200123225}, - abstract = {The meaning of sustainability is the subject of intense debate among environmental and resource economists. Perhaps no other issue separates more clearly the traditional economic view from the views of most natural scientists. The debate currently focuses on the substitutability between the economy and the environment or between "natural capital" and "manufactured capital" - a debate captured in terms of weak versus strong sustainability. In this article, we examine the various interpretations of these concepts. We conclude that natural science and economic perspectives on sustainability are inconsistent. The market-based Hartwick-Solow "weak sustainability" approach is far removed from both the ecosystem-based "Holling sustainability" and the "strong sustainability" approach of Daly and others. Each of these sustainability criteria implies a specific valuation approach, and thus an ethical position, to support monetary indicators of sustainability such as a green or sustainable Gross Domestic Product (GDP). The conflict between "weak sustainability" and "strong sustainability" is more evident in the context of centralized than decentralized decision making. In particular, firms selling "services" instead of material goods and regarding the latter as "capital" leads to decisions more or less consistent with either type of sustainability. Finally, we discuss the implications of global sustainability for such open systems as regions and countries. Open systems have not been dealt with systematically for any of the sustainability criteria.}, - file = {/Users/fabio/Zotero/storage/BGEAMZMS/Weak_Versus_Strong_Sustainabil.pdf} -} - -@book{Ayres2016, - title = {Energy, {{Complexity}} and {{Wealth Maximization}}}, - author = {Ayres, Robert}, - year = {2016}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-319-30545-5}, - isbn = {978-3-319-30544-8}, - file = {/Users/fabio/Zotero/storage/UL8PFQDQ/(The Frontiers Collection) Robert Ayres (auth.) - Energy, Complexity and Wealth Maximization-Springer International Publishing (2016).pdf} -} - -@article{aytacIoTBasedIntelligence2020, - title = {{{IoT Based Intelligence}} for {{Proactive Waste Management}} in {{Quick Service Restaurants}}}, - author = {AYTA{\c C}, Kerem and KOR{\c C}AK, {\"O}mer}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125401}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125401}, - urldate = {2020-12-14} -} - -@article{Azadeh2011, - title = {Design and Implementation of an Integrated {{Taguchi}} Method for Continuous Assessment and Improvement of Manufacturing Systems}, - author = {Azadeh, Ali and {Miri-Nargesi}, Seyed Sina and Goldansaz, Seyed Mortezza and Zoraghi, Nima}, - year = {2011}, - month = aug, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {59}, - number = {9-12}, - pages = {1073--1089}, - issn = {0268-3768}, - doi = {10.1007/s00170-011-3549-2}, - urldate = {2014-03-05}, - keywords = {method,multivariate statistics integrated assessment,productivity and competitiveness,taguchi}, - file = {/Users/fabio/Zotero/storage/NP65Z6V5/Design and implementation of an integrated Taguchi method for continuous assessment and improvement of manufacturing systems.pdf} -} - -@article{Azimi2016, - title = {Emissions of {{Ultrafine Particles}} and {{Volatile Organic Compounds}} from {{Commercially Available Desktop Three-Dimensional Printers}} with {{Multiple Filaments}}}, - author = {Azimi, Parham and Zhao, Dan and Pouzet, Claire and Crain, Neil E. and Stephens, Brent}, - year = {2016}, - month = feb, - journal = {Environmental Science \& Technology}, - volume = {50}, - number = {3}, - pages = {1260--1268}, - issn = {0013-936X}, - doi = {10.1021/acs.est.5b04983}, - abstract = {Previous research has shown that desktop 3D printers can emit large numbers of ultrafine particles (UFPs, particles less than 100 nm) and some hazardous volatile organic compounds (VOCs) during printing, although very few filament and 3D printer combinations have been tested to date. Here we quantify emissions of UFPs and speciated VOCs from five commercially available filament extrusion desktop 3D printers utilizing up to nine different filaments by controlled experiments in a test chamber. Median estimates of time-varying UFP emission rates ranged from ?108 to ?1011 min?1 across all tested combinations, varying primarily by filament material and, to a lesser extent, bed temperature. The individual VOCs emitted in the largest quantities included caprolactam from nylon-based and imitation wood and brick filaments (ranging from ?2 to ?180 ?g/min), styrene from acrylonitrile butadiene styrene (ABS) and high-impact polystyrene (HIPS) filaments (ranging from ?10 to ?110 ?g/min), and lactide from polylactic acid (PLA) filaments (ranging from ?4 to ?5 ?g/min). Results from a screening analysis of potential exposure to these products in a typical small office environment suggest caution should be used when operating many of the printer and filament combinations in poorly ventilated spaces or without the aid of combined gas and particle filtration systems.\textbackslash nPrevious research has shown that desktop 3D printers can emit large numbers of ultrafine particles (UFPs, particles less than 100 nm) and some hazardous volatile organic compounds (VOCs) during printing, although very few filament and 3D printer combinations have been tested to date. Here we quantify emissions of UFPs and speciated VOCs from five commercially available filament extrusion desktop 3D printers utilizing up to nine different filaments by controlled experiments in a test chamber. Median estimates of time-varying UFP emission rates ranged from ?108 to ?1011 min?1 across all tested combinations, varying primarily by filament material and, to a lesser extent, bed temperature. The individual VOCs emitted in the largest quantities included caprolactam from nylon-based and imitation wood and brick filaments (ranging from ?2 to ?180 ?g/min), styrene from acrylonitrile butadiene styrene (ABS) and high-impact polystyrene (HIPS) filaments (ranging from ?10 to ?110 ?g/min), and lactide from polylactic acid (PLA) filaments (ranging from ?4 to ?5 ?g/min). Results from a screening analysis of potential exposure to these products in a typical small office environment suggest caution should be used when operating many of the printer and filament combinations in poorly ventilated spaces or without the aid of combined gas and particle filtration systems.}, - file = {/Users/fabio/Zotero/storage/TTAAFA8A/Emissions of ultrafine particles and colatile organic compounds from commercially available desktop 3D printers with multiple filaments (2016).pdf} -} - -@article{azizComponentDesignOptimisation2021, - title = {Component Design Optimisation Based on Artificial Intelligence in Support of Additive Manufacturing Repair and Restoration: {{Current}} Status and Future Outlook for Remanufacturing}, - author = {Aziz, Nurhasyimah Abd and Adnan, Nur Afiqah Amalin and Wahab, Dzuraidah Abd and Azman, Abdul Hadi}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {296}, - pages = {126401}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126401}, - urldate = {2021-03-14}, - abstract = {The Circular Economy concept aims to ensure environmental sustainability through the recovery of durable products that have reached the end of their useable life. Recovery strategies such as remanufacturing enable durable parts and cores to be restored to their original functionality and performance, thereby minimising the consumption of virgin materials and energy required for the production of new parts and components. To date, the repair and restoration processes concerning those parts and cores that can be remanufactured involved conventional methods such as material overlay and welding. These conventional methods are highly dependent on skilled manual labour or specialised industrial robots. With the notable growth in the global remanufacturing industry, it is imperative to deploy highly-efficient and sustainable methods to automate repair and restoration. Recent trends in remanufacturing repair and restoration indicate an increasing interest in metal additive manufacturing technology. To enhance the additive manufacturing efficiency for automated repair and restoration, it is crucial to optimise the core design. This paper provides a comprehensive and comparative outline of remanufacturing repair and restoration, using both conventional and automated methods. This paper also presents and discusses comprehensive insight into the application of AI-based techniques for design optimisation specific to additive manufacturing repair. Component design optimisation is crucial due to its impact on process efficiency and the life cycle of components. The review indicates that, despite the increasing interest in using additive manufacturing for repair and restoration, reports on the application of AI for design optimisation specific to repair and restoration using additive manufacturing remain limited. Furthermore, there are no established guidelines concerning design for repair and restoration using additive manufacturing. The paper concludes with recommendations for further research and presents a future outlook on AI-based optimisation for component design to facilitate repair and restoration using additive manufacturing. Automation is expected to facilitate the removal of roadblocks specific to process inefficiency and human limitations during conventional repair and restoration in remanufacturing.}, - keywords = {Additive manufacturing,Artificial intelligence,Design optimisation,Remanufacturing,Repair and restoration} -} - -@article{Aznar2006, - title = {Plastic Waste Elimination by Co-Gasification with Coal and Biomass in Fluidized Bed with Air in Pilot Plant}, - author = {Aznar, Mar{\'i}a P. and a. Caballero, Miguel and a. Sancho, Jes{\'u}s and Franc{\'e}s, E.}, - year = {2006}, - month = may, - journal = {Fuel Processing Technology}, - volume = {87}, - number = {5}, - pages = {409--420}, - issn = {03783820}, - doi = {10.1016/j.fuproc.2005.09.006}, - urldate = {2014-06-04}, - keywords = {air,biomass,co-gasification,coal,fluidized bed,pilot plant,plastic waste}, - file = {/Users/fabio/Zotero/storage/35JYUKL8/Plastic waste elimination by co-gasification with coal and biomass in fluidized bed with air in pilot plant.pdf} -} - -@article{b.DesignPrototypingMethods, - title = {Design {{Prototyping Methods}}: {{State}} of the {{Art}} in {{Strategies}}, {{Techniques}}, and {{Guidelines}}}, - author = {B., Camburn and V., Viswanathan and J., Linsey and D., Anderson and D., Jensen and R., Crawford and K., Otto and K., Wood}, - journal = {Des. Sci.}, - volume = {3}, - pages = {e13}, - urldate = {2021-02-16} -} - -@article{b.SystematicMethodDesign, - title = {A {{Systematic Method}} for {{Design Prototyping}}}, - author = {B., Camburn}, - journal = {ASME J. Mech. Des.}, - volume = {137}, - number = {8}, - pages = {081102}, - urldate = {2021-02-16} -} - -@article{Babaei2015, - title = {Household Recycling Knowledge, Attitudes and Practices towards Solid Waste Management}, - author = {Babaei, Ali Akbar and Alavi, Nadali and Goudarzi, Gholamreza and Teymouri, Pari and Ahmadi, Kambiz and Rafiee, Mohammad}, - year = {2015}, - journal = {Resources, Conservation and Recycling}, - volume = {102}, - pages = {94--100}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2015.06.014}, - abstract = {Abstract A questionnaire survey consisting of 2400 householders was performed on Abadan residents to evaluate their knowledge, attitudes, and practices (KAP) towards solid waste (SW) reduction, source separation and recycling, collection and willingness to pay (WTP) for SW services. The study has also covered the relationship between demographic variables and KAP towards SW management. The data analyzed suggests that the studied community had a very positive attitude to take part in SW source separation and recycling plans. However, the respondents not only showed low intimate knowledge of different steps of SW management, but were also weak to take practices about these steps. The KAP of SW source separation and recycling was influenced by demographic factors of age, education level, gender and occupation. It was further found that education level and occupation were two significant factors affecting residents' WTP ({$\chi$}\textsuperscript{2} = 24.083, p-value {$<$}0.0001). In conclusion our study found that providing public with MSW infrastructures and improving citizens' awareness about SW source separation and recycling to promote SW recycling programs hold great promise for developing effective public campaigns and behavior-changing interventions. This has important implications in that the usual KAP of public proved inadequate in the case of SW source separation and recycling. The implementation of needs-based training programmes considering females as one of the main audience groups and determination of municipality needs are thereby highly advocated.}, - isbn = {0921-3449}, - pmid = {28459451}, - keywords = {Citizens,Demographic factors,KAP,Municipal solid waste (MSW) management,Questionnaire surveya}, - file = {/Users/fabio/Zotero/storage/FXJAIGX9/Household recycling knowledge, attitudes and practices towards solid waste management.pdf} -} - -@article{Babagowda2018, - title = {Study of {{Effects}} on {{Mechanical Properties}} of {{PLA Filament}} Which Is Blended with {{Recycled PLA Materials}}}, - author = {{Babagowda} and Kadadevara Math, R.S. and Goutham, R. and Srinivas Prasad, K.R}, - year = {2018}, - month = feb, - journal = {IOP Conference Series: Materials Science and Engineering}, - volume = {310}, - number = {1}, - pages = {012103}, - publisher = {{Institute of Physics Publishing}}, - issn = {1757-8981}, - doi = {10.1088/1757-899X/310/1/012103}, - urldate = {2020-12-03}, - abstract = {Fused deposition modeling is a rapidly growing additive manufacturing technology due to its ability to build functional parts having complex geometry. The mechanical properties of the build part is depends on several process parameters and build material of the printed specimen. The aim of this study is to characterize and optimize the parameters such as layer thickness and PLA build material which is mixed with recycled PLA material. Tensile and flexural or bending test are carried out to determine the mechanical response characteristics of the printed specimen. Taguchi method is used for number of experiments and Taguchi S/N ratio is used to identify the set of parameters which give good results for respective response characteristics, effectiveness of each parameters is investigated by using analysis of variance (ANOVA).}, - keywords = {Additive manufacturing,fused deposition modeling,recycled PLA,Taguchi method}, - file = {/Users/fabio/Zotero/storage/HDW9DDLH/full-text.pdf} -} - -@article{babialmenarModellingNetEnvironmental2023, - title = {Modelling the Net Environmental and Economic Impacts of Urban Nature-Based Solutions by Combining Ecosystem Services, System Dynamics and Life Cycle Thinking: {{An}} Application to Urban Forests}, - shorttitle = {Modelling the Net Environmental and Economic Impacts of Urban Nature-Based Solutions by Combining Ecosystem Services, System Dynamics and Life Cycle Thinking}, - author = {Bab{\'i} Almenar, Javier and Petucco, Claudio and Sonnemann, Guido and Geneletti, Davide and Elliot, Thomas and Rugani, Benedetto}, - year = {2023}, - month = apr, - journal = {Ecosystem Services}, - volume = {60}, - pages = {101506}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2022.101506}, - urldate = {2023-02-12}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/G4HQ87CN/Babí Almenar et al_2023_Modelling the net environmental and economic impacts of urban nature-based.pdf} -} - -@article{babialmenarNexusNaturebasedSolutions2021, - ids = {babialmenar2021a}, - title = {Nexus between Nature-Based Solutions, Ecosystem Services and Urban Challenges}, - author = {Bab{\'i} Almenar, Javier and Elliot, Thomas and Rugani, Benedetto and Philippe, Bod{\'e}nan and Navarrete Gutierrez, Tomas and Sonnemann, Guido and Geneletti, Davide}, - year = {2021}, - month = jan, - journal = {Land Use Policy}, - volume = {100}, - pages = {104898}, - publisher = {{Pergamon}}, - issn = {0264-8377}, - doi = {10.1016/J.LANDUSEPOL.2020.104898}, - urldate = {2022-06-01}, - abstract = {Nature-based Solutions (NBS) are increasingly promoted to support sustainable and resilient urban planning. However, design and planning urban NBS targeted at the needs of the local context require knowledge about the causal relationships between NBS, ecosystem services (ES) and urban challenges (UC) This paper aims at contributing to this knowledge, by systematically identifying nexuses (i.e. qualitative links) between UC, ES and NBS, and describing plausible causal relationships. A conceptual UC-ES-NBS criteria framework was built, and used to guide a two-step systematic literature review on current UC and on the supply of ES by urban NBS. This was followed by a non-systematic literature review, which complemented the previous one by unveiling knowledge gaps on the biophysical and social processes and attributes on which specific ES classes depend. The non-systematic review was also used to identify additional NBS. The UC review identified 18 UC and 58 sub-challenges, and illustrated which UC were more studied, according to the type of literature and environmental and socio-economic attributes of urban contexts. The ES review led to the development of an urban NBS classification, and supported the identification of UC-ES and ES-NBS nexuses, which were analysed and classified into four groups of causal relationship. For the nexuses identified as direct plausible causal relationship, the main processes and attributes on which the supply of specific ES depend were pointed out. Relationships between UC, ES, NBS, processes, and attributes were represented in the form of network diagrams. Our results can be used to support urban policies aimed at mainstreaming NBS and as a basis to further understand UC-ES-NBS relationships.}, - keywords = {Ecosystem services,Nature-based solutions,Urban challenges,Urban resilience,Urban sustainability}, - file = {/Users/fabio/Zotero/storage/3RGXDYUU/full-text.pdf;/Users/fabio/Zotero/storage/AQWZDW5V/Babí Almenar et al. - 2021 - Nexus between nature-based solutions, ecosystem se.pdf} -} - -@article{babriMaterialAffordancesCircular2022, - title = {Material Affordances in Circular Products and Business Model Development: For a Relational Understanding of Human and Material Agency}, - shorttitle = {Material Affordances in Circular Products and Business Model Development}, - author = {Babri, Maira and Corvellec, Herv{\'e} and St{\aa}l, Herman I.}, - year = {2022}, - month = jan, - journal = {Culture and Organization}, - volume = {28}, - number = {1}, - pages = {79--96}, - publisher = {{Routledge}}, - issn = {1475-9551}, - doi = {10.1080/14759551.2021.1986506}, - urldate = {2023-05-15}, - abstract = {This paper uses the notion of material affordances to show that a focus on how people engage with materials helps understanding how organizations transit toward sustainability. Material affordances refer to the enablements and constraints afforded by materials to someone engaging with an environment for a particular purpose. Based on a qualitative study of a company's efforts at becoming circular, we show that material affordances are evolutive as organizational members shift focus from the development of products to the establishment of a circular business model. We also show that affordances are distributed across the company's circular ecosystem. Between what they enable and prevent, they invite humans to a dynamic engagement with materials that decenters human agencies to incorporate material agency in such efforts. A key contribution of the notion of material affordances is to put the relationships of humans and materials at the core of a transition toward circularity and sustainability.}, - keywords = {Affordance,Circular business model,Circular products,Materials,Organizational environmental sustainability}, - file = {/Users/fabio/Zotero/storage/2ME6TJ96/Babri et al. - 2022 - Material affordances in circular products and busi.pdf;/Users/fabio/Zotero/storage/WD9NEYSN/Babri et al. - 2022 - Material affordances in circular products and busi.pdf} -} - -@article{babuRecentDevelopmentsApplication2023, - title = {Recent Developments in the Application of Machine-Learning towards Accelerated Predictive Multiscale Design and Additive Manufacturing}, - author = {Babu, Sandeep Suresh and Mourad, Abdel-Hamid I. and Harib, Khalifa H. and Vijayavenkataraman, Sanjairaj}, - year = {2023}, - month = dec, - journal = {Virtual and Physical Prototyping}, - volume = {18}, - number = {1}, - pages = {e2141653}, - publisher = {{Taylor \& Francis}}, - issn = {1745-2759}, - doi = {10.1080/17452759.2022.2141653}, - urldate = {2022-12-12}, - abstract = {The application of three-dimensional (3D) printing/Additive Manufacturing (AM) for developing multi-functional smart/intelligent composite materials is a highly promising area of engineering research. However, there is often no reliable means for predicting and modelling the material performance, and the wide-scale industrial adoption of AM is limited due to factors such as design barriers, limited materials library, processing defects and inconsistency in product quality. A comprehensive framework considering the generalised applicability of ML algorithms at sub-sequent stages of the AM process from the initial design to the post-processing stages in the literature is lacking. In this paper, the integration of various ML applications at various sub-processes is discussed, including pre-processing design stage, parameter optimisation, anomaly detection, in-situ monitoring, and the final post-processing stages. The challenges and potential solutions for standardising these integrated techniques have been identified. The article is promising for professionals and researchers in AM and AI/ML techniques.}, - keywords = {3D printing,additive manufacturing,fused deposition modelling,Machine learning,multiscale modelling,smart materials}, - file = {/Users/fabio/Zotero/storage/N85QMK68/Babu et al_2023_Recent developments in the application of machine-learning towards accelerated.pdf} -} - -@article{Baccarne2014a, - title = {Urban Socio-Technical Innovations with and by Citizens}, - author = {Baccarne, Bastiaan and Mechant, Peter and Schuurman, Dimitri and Colpaert, Pieter and De Marez, Lieven}, - year = {2014}, - journal = {Interdisciplinary Studies Journal}, - volume = {3}, - number = {4}, - pages = {143--156}, - issn = {1799-2710}, - abstract = {This article investigates bottom-up socio-technical innovations with and by citizen developers in an Urban living Lab, which is considered a platform for grassroots service creation in a city. In specific, the Living Lab framework is discussed as an instrumental platform within a Smart City, facilitating the governance of bottom-up innovation `by' and `with' citizens. The analysis is based on an in-depth case-study analysis on the use of Open Data and the `hackathon' format within the Ghent Living Lab (Ghent, Belgium). The analytical framework focusses on the innovation ecosystem, urban transitions, user innovation, civic engagement, public and economic value creation and sustainability issues. Our findings explore the nature of the interactions and the outcomes of the projects. While hackathon events within an Urban Living Lab have already proven some of their potential, several opportunities remain. Especially the lack of involvement of private partners and a rather low focus on potential business models for the projects forecloses long-term sustainability and economic value creation. Central governance, focus on follow-up processes and a rigid innovation development framework are needed to overcome these challenges.}, - isbn = {http://hdl.handle.net/1854/LU-4365378}, - keywords = {Open Data,Smart Cities,Social Sciences,Socio-technical Innovations,Urban Living Labs,User innovation} -} - -@misc{bacher3DprintingUndisturbedSoil2013, - title = {{{3D-printing}} of Undisturbed Soil Imaged by {{X-ray}}}, - author = {Bacher, Matthias}, - year = {2013}, - volume = {16}, - pages = {35}, - abstract = {The simulation of the Gaia observations is a key tool for the \textbackslash npreparation of the mission. Simulations have been, and continue to be,\textbackslash nused to test and optimise the mission design. They allowed the\textbackslash ndevelopment of a prototype of the Gaia Data Access and Analysis System,\textbackslash nto start the development of the reduction and analysis algorithms and to\textbackslash ndevelop prototypes of the on-board data handling algorithms. They are\textbackslash nused to assess the final accuracy and finally prepare the scientific\textbackslash nexploitation. Such a mission simulator is a long term project which has\textbackslash nled to the development of a modular tool allowing progressive\textbackslash nenhancement of the simulated data quality towards representative Gaia\textbackslash ndata. It combines models of the different astrophysical sources that\textbackslash nGaia will observe, providing spatial distribution, photometry,\textbackslash nkinematics, spectra, etc, with a model of the satellite and its\textbackslash ninstruments. The development of those models is made within the Gaia\textbackslash nSimulation Working Group which organises this development and provides\textbackslash naccess to the resulting simulations to the Gaia community. In this\textbackslash npresentation we will describe this simulation effort, its organisation,\textbackslash ndevelopment status, current applications and future enhancements.}, - isbn = {1609-042X} -} - -@article{badarinathIntegrationEvaluationRobotic2021, - title = {Integration and Evaluation of Robotic Fused Filament Fabrication System}, - author = {Badarinath, Rakshith and Prabhu, Vittaldas}, - year = {2021}, - month = may, - journal = {Additive Manufacturing}, - volume = {41}, - pages = {101951}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.101951}, - urldate = {2021-04-21}, - abstract = {Fused filament fabrication (FFF) continues to be among the most widespread additive manufacturing process for making polymeric functional prototypes, and in several cases end-use parts. There is a large installed base of serial-link industrial robots, some of which could be potentially retrofitted with an extruder head as an end-effector to serve as FFF systems with as many as six degrees of freedom compared to 3-axis gantry mechanisms that are typically deployed today. This paper identifies and proposes solutions to key engineering challenges that arise in retrofitting such robotic FFF systems in terms of integrating robot motion controller with extruder controller and evaluating the quality of the fabricated parts. Specifically, we propose an approach for integration and real-time synchronization of controllers to ensure that the extrusion velocity and deposition velocity match closely by building upon an analytical model for predicting road geometry as a function of process parameters. Compared to gantry mechanisms, this is challenging in serial-link industrial robots because of significantly larger and space-variant inertias. Furthermore, to compensate for distortion in the bed surface of the retrofitted robotic FFF system, a bed compensation algorithm based on bilinear interpolation has been developed. We have engineered a fully functional research testbed in which integration and real-time synchronization of controllers is achieved by (1) communicating space-variant process parameters in real-time using TCP/IP sockets, and (2) analog and digital I/O interfacing. Experimental testing shows excellent (R2 = 0.9983) agreement between requested and actual volumetric flow rates and less than 5\% errors in extrusion widths and heights in test samples fabricated across the range of physical limits of FFF process parameters. The testbed is also evaluated in terms of the impact of controller synchronization on the part dimensional accuracy for simple and complex geometries. This work can serve as a basis for further engineering innovations towards cost-effectively harnessing the capacity of industrial robots to manufacture geometrically accurate parts using FFF.}, - keywords = {Bed compensation,Controller synchronization,Fused filament fabrication,Road geometry,Robotics,System integration} -} - -@book{Badenhorst2016, - title = {Research Literacies and Writing Pedagogies for Masters and Doctoral Writers}, - author = {Badenhorst, Cecile and Guerin, Cally}, - year = {2016}, - journal = {Research Literacies and Writing Pedagogies for Masters and Doctoral Writers}, - doi = {10.1163/9789004304338}, - abstract = {Post/graduate students experience enormous challenges in research writing. New writing pedagogies make explicit the often-hidden research literacies. Research Literacies and Writing Pedagogies for Masters and Doctoral Writers explores emerging innovations in supporting the development of research literacies in post/graduate writing.}, - isbn = {978-90-04-30433-8}, - file = {/Users/fabio/Zotero/storage/7A9FC5VK/(Studies In Writing, Vol. 31) Cecile Badenhorst, Cally Guerin - Research Literacies And Writing Pedagogies For Masters And Doctoral Writers-Brill (2016).pdf} -} - -@article{Badenhorst2016a, - title = {Academic {{Publishing}}: {{Making}} the {{Implicit Explicit}}}, - author = {Badenhorst, Cecile and Xu, Xiaolin}, - year = {2016}, - journal = {Publications}, - volume = {4}, - number = {3}, - pages = {24}, - issn = {2304-6775}, - doi = {10.3390/publications4030024}, - abstract = {For doctoral students, publishing in peer-reviewed journals is a task many face with anxiety and trepidation. The world of publishing, from choosing a journal, negotiating with editors and navigating reviewers' responses is a bewildering place. Looking in from the outside, it seems that successful and productive academic writers have knowledge that is inaccessible to novice scholars. While there is a growing literature on writing for scholarly publication, many of these publications promote writing and publishing as a straightforward activity that anyone can achieve if they follow the rules. We argue that the specific and situated contexts in which academic writers negotiate publishing practices is more complicated and messy. In this paper, we attempt to make explicit our publishing processes to highlight the complex nature of publishing. We use autoethnographic narratives to provide discussion points and insights into the challenges of publishing peer reviewed articles. One narrative is by a doctoral student at the beginning of her publishing career, who expresses her desires, concerns and anxieties about writing for publication. The other narrative focuses on the publishing practices of a more experienced academic writer. Both are international scholars working in the Canadian context. The purpose of this paper is to explore academic publishing through the juxtaposition of these two narratives to make explicit some of the more implicit processes. Four themes emerge from these narratives. To publish successfully, academic writers need: (1) to be discourse analysts; (2) to have a critical competence; (3) to have writing fluency; and (4) to be emotionally intelligent.}, - keywords = {academic publishing,academic writing,autoethnography,graduate student publishing,productive,research writing,scholarly publication}, - file = {/Users/fabio/Zotero/storage/6585YHMB/publications-04-00024.pdf} -} - -@article{Badenhorst2019, - title = {Literature Reviews, Citations and Intertextuality in Graduate Student Writing}, - author = {Badenhorst, Cecile M.}, - year = {2019}, - journal = {Journal of Further and Higher Education}, - volume = {43}, - number = {2}, - pages = {263--275}, - publisher = {{Routledge}}, - issn = {14699486}, - doi = {10.1080/0309877X.2017.1359504}, - abstract = {Literature reviews are a genre that many graduate students do not fully understand and find difficult to write. While the genre, language and rhetorical moves of literature reviews are widely researched, less research focuses on citation use in literature reviews. Teaching students `how-to' write the literature review through explicit genre awareness is not enough. What is needed, is a focus on the discursive nature of citations since citations are a core ingredient in literature reviews. The complexity of citing, referencing and using sources is difficult to teach in university classrooms, especially in courses that focus on content knowledge. When it is taught, it is often imparted to students as conventions with particular organisational features around citation styles. Or it is taught within the discourse of morality and academic dishonesty that surrounds plagiarism. What is lacking is a pedagogy that relates citing to the more complex discursive practices that are implicit and deeply embedded in particular time-bound contexts. The purpose of this research was to explore citation patterns in 23 draft and final masters' student literature review papers to better understand the ways in which students use sources in literature reviews with the aim of informing pedagogy. Findings indicate that the concept of intertextuality, specifically, transgressive intertextuality, intertextual engagement and discursive intertextuality can help with the teaching and learning of literature reviews and citation use.}, - keywords = {citations,graduate student writing,higher education,intertextuality,Literature reviews}, - file = {/Users/fabio/Zotero/storage/SINCCLCF/Literature reviews, citations and intertextuality in graduate student writing.pdf} -} - -@article{Badia2011, - title = {Assessing the {{MALDI-TOF MS}} Sample Preparation Procedure to Analyze the Influence of Thermo-Oxidative Ageing and Thermo-Mechanical Degradation on Poly ({{Lactide}})}, - author = {Bad{\'i}a, J.D. and Str{\"o}mberg, E. and {Ribes-Greus}, A. and Karlsson, S.}, - year = {2011}, - month = jul, - journal = {European Polymer Journal}, - volume = {47}, - number = {7}, - pages = {1416--1428}, - issn = {00143057}, - doi = {10.1016/j.eurpolymj.2011.05.001}, - abstract = {Multiple processing by means of successive injection cycles was used to simulate the thermo-mechanical degradation effects on the oligomeric distribution of PLA under mechanical recycling. Likewise, an accelerated thermal ageing over PLA glass transition was performed in order to simulate its service life. MALDI-TOF MS was used for the analysis and the sample preparation procedure was assessed by means of a statistical Design of Experiments (DoE). The quality effects in use for the analysis were signal-to-noise ratio and Resolution. Different matrixes, analyte/matrix proportions and the use of NaTFA as cationization agent were considered. A deep inspection of the statistical results provided a better understanding of the influence of the different factors, individually or in combination, to the signal. The application of DoE for the improvement of the MALDI measurement of PLA stated that the best combination of factors (levels) was the following: matrix (s-DHB), proportion analyte/matrix (1/5 V/V), and no use of cationization agent. Degradation primarily affected the initially predominant cyclic [LAC]n and linear H[LAL]nOH species, where LA stands for a PLA repeating unit. Intramolecular and intermolecular transesterifications as well as hydrolytic and homolytic reactions took place during the formation and disappearance of oligomeric species. In both degradation mechanisms induced by thermal ageing and thermo-mechanical degradation, the formation of H[LA L]nOCH3 by intermolecular transesterifications was highlighted. ?? 2011 Elsevier Ltd. All rights reserved.}, - isbn = {0014-3057}, - keywords = {Design of Experiments (DoE),Matrix-Assisted Laser Desorption/Ionization Time-o,Polylactide (PLA),Thermo-mechanical degradation,Thermo-oxidative ageing}, - file = {/Users/fabio/Zotero/storage/Y5WXIAWW/Assessing the MALDI-TOF MS sample preparation procedure to analyze the influence of thermo-oxidative ageing and thermo-mechanical degrad.pdf} -} - -@article{Badia2012, - title = {Hygrothermal Ageing of Reprocessed Polylactide}, - author = {Badia, J.D. and {Santonja-Blasco}, L. and {Mart{\'i}nez-Felipe}, A. and {Ribes-Greus}, A.}, - year = {2012}, - month = oct, - journal = {Polymer Degradation and Stability}, - volume = {97}, - number = {10}, - pages = {1881--1890}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2012.06.001}, - urldate = {2014-07-23}, - file = {/Users/fabio/Zotero/storage/P9FJ3X2Y/Hygrothermal ageing of reprocessed polylactide.pdf} -} - -@article{Badia2012a, - title = {Reprocessed Polylactide: Studies of Thermo-Oxidative Decomposition.}, - author = {Badia, J D and {Santonja-Blasco}, L and {Mart{\'i}nez-Felipe}, A and {Ribes-Greus}, A}, - year = {2012}, - month = jun, - journal = {Bioresource technology}, - volume = {114}, - eprint = {22481003}, - eprinttype = {pubmed}, - pages = {622--8}, - publisher = {{Elsevier Ltd}}, - issn = {1873-2976}, - doi = {10.1016/j.biortech.2012.02.128}, - urldate = {2014-07-23}, - abstract = {The combustion process of virgin and reprocessed polylactide (PLA) was simulated by multi-rate linear non-isothermal thermogravimetric experiments under O(2). A complete methodology that accounted on the thermal stability and emission of gases was thoroughly developed. A new model, Thermal Decomposition Behavior, and novel parameters, the Zero-Decomposition Temperatures, were used to test the thermal stability of the materials under any linear heating rate. The release of gases was monitored by Evolved Gas Analysis with in-line FT-IR analysis. In addition, a kinetic analysis methodology that accounted for variable activation parameters showed that the decomposition process could be driven by the formation of bubbles in the melt. It was found that the combustion technologies for virgin PLA could be transferred for the energetic valorization of its recyclates. Combustion was pointed out as appropriate for the energetic valorization of PLA submitted to more than three successive reprocessing cycles.}, - pmid = {22481003}, - keywords = {Chemical,Computer Simulation,Hot Temperature,Models,Oxidation-Reduction,Polyesters,Polyesters: chemistry,Recycling,Recycling: methods}, - file = {/Users/fabio/Zotero/storage/LJHEIQG3/Reprocessed polylactide studies of thermo-oxidative decomposition.pdf} -} - -@article{Badia2012b, - title = {Material Valorisation of Amorphous Polylactide. {{Influence}} of Thermo-Mechanical Degradation on the Morphology, Segmental Dynamics, Thermal and Mechanical Performance}, - author = {Badia, J.D. and Str{\"o}mberg, E. and Karlsson, S. and {Ribes-Greus}, A.}, - year = {2012}, - month = apr, - journal = {Polymer Degradation and Stability}, - volume = {97}, - number = {4}, - pages = {670--678}, - publisher = {{Elsevier Ltd}}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2011.12.019}, - urldate = {2014-07-23}, - file = {/Users/fabio/Zotero/storage/LCNLTBJG/Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, therma.pdf} -} - -@article{Badia2016, - title = {Mechanical Recycling of Polylactide, Upgrading Trends and Combination of Valorization Techniques}, - author = {Badia, J.D. and {Ribes-Greus}, A.}, - year = {2016}, - month = nov, - journal = {European Polymer Journal}, - volume = {84}, - pages = {22--39}, - issn = {00143057}, - doi = {10.1016/j.eurpolymj.2016.09.005}, - abstract = {The upcoming introduction of polylactides in the fractions of polymer waste encourages technologists to ascertain its valorization at the best quality conditions. Mechanical recycling of PLA represents one of the most cost-effective methodologies, but the recycled materials are usually directed to downgraded applications, due to the inherent thermo-mechanical degradation affecting its mechanical, thermal and rheological performance. In this review, the current state of mechanical recycling of PLA is reported, with special emphasis on a multi-scale comparison among different studies. Additionally, the applications of physical and chemical upgrading strategies, as well as the chances to blend and/or composite recycled PLA are considered. Moreover, the different valorization techniques that can be combined to optimize the value of PLA goods along its life cycle are discussed. Finally, a list of different opportunities to nurture the background of the mechanical recycling of PLA is proposed, in order to contribute to the correct waste management of PLA wastes.}, - keywords = {Biopolymer,Degradation,Polylactide (PLA),Recycling,Reprocessing,Review,Upgrading,Valorization}, - file = {/Users/fabio/Zotero/storage/8YAXKN2D/Badia, Ribes-Greus - 2016 - Mechanical recycling of polylactide wastes, upgrading trends and combination of valorisation techniques a re.pdf} -} - -@article{Baechler2013, - title = {Distributed Recycling of Waste Polymer into {{RepRap}} Feedstock}, - author = {Baechler, Christian and DeVuono, Matthew and Pearce, Joshua M}, - year = {2013}, - month = mar, - journal = {Rapid Prototyping Journal}, - volume = {19}, - number = {2}, - pages = {118--125}, - issn = {1355-2546}, - doi = {10.1108/13552541311302978}, - urldate = {2014-06-18}, - abstract = {Purpose: A low-cost, open source, self-replicating rapid prototyper (RepRap) has been developed, which greatly expands the potential user base of rapid prototypers. The operating cost of the RepRap can be further reduced using waste polymers as feedstock. Centralized recycling of polymers is often uneconomic and energy intensive due to transportation embodied energy. This paper provides a proof of concept for high-value recycling of waste polymers at distributed creation sites. Approach: Previous designs of waste plastic extruders (also known as RecycleBots) were evaluated using a weighted evaluation matrix. An updated design was completed and the description and analysis of the design is presented including component summary, testing procedures, a basic life cycle analysis and extrusion results. The filament was tested for consistency of density and diameter while quantifying electricity consumption. Findings: Filament was successfully extruded at an average rate of 90 mm/min and used to print parts. The filament averaged 2.805mm diameter with 87\% of samples between 2.540mm and 3.081mm. The average mass was 0.564 g/100mm length. Energy use was 0.06 kWh/m. Originality: This paper reports on the first technical evaluation of a feedstock filament for the RepRap from waste plastic material made in a distributed recycling device. Practical Implications: The success of the RecycleBot further reduces RepRap operating costs, which enables distributed in-home, value added, plastic recycling. This has implications for municipal waste management programs as in-home recycling could reduce cost and greenhouse gas emissions associated with waste collection and transportation as well as the environmental impact of manufacturing custom plastic parts}, - isbn = {1355254131130}, - keywords = {open source,polymer extrusion,rapid prototyping,recycling,waste plastic recycling}, - file = {/Users/fabio/Zotero/storage/6GLKJLHR/Baechler, DeVuono, Pearce - 2013 - Distributed recycling of waste polymer into RepRap feedstock.pdf} -} - -@article{baibarac-duignanGluingAlternativeImaginaries2023, - title = {`{{Gluing}}' Alternative Imaginaries of Sustainable Urban Futures: {{When}} Commoning and Design Met in the Post-Socialist Neighbourhood of {{M\u{a}n\u{a}ștur}}, {{Romania}}}, - shorttitle = {`{{Gluing}}' Alternative Imaginaries of Sustainable Urban Futures}, - author = {{Baibarac-Duignan}, Corelia and Mede{\c s}an, Silviu}, - year = {2023}, - month = oct, - journal = {Futures}, - volume = {153}, - pages = {103233}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2023.103233}, - urldate = {2023-08-31}, - abstract = {Imagination is key to transforming societal values and everyday life practices towards sustainable urban futures by allowing us to see alternatives. We propose that glimpses into other futures exist, illustrated by bottom-up practices of urban commoning. By allowing the experience of alternatives on a human scale and in everyday life, commoning practices can help accelerate sustainability transitions. Using the case of a post-socialist Romanian neighbourhood, M\u{a}n\u{a}stur, we discuss how design might support the coproduction of alternative imaginaries by creatively engaging with practices of commoning. We do this through the lens of `gluing', which we conceptualise as a situated, mediated, and relational approach to investigating this coproduction process. Rather than aiming for a direct transfer, replication or expansion of the visions generated through commoning, design could provide experiential tools that allow communities to shape their own futures, while making room for differences in perspectives and values. Our findings contribute to the fields of experiential and everyday futures, at the intersection with design and sustainability transitions. To democratise sustainable futures, we suggest that the coproduction of alternative imaginaries needs to involve co-designing with communities, material engagement with wider issues surrounding sustainability, and open-ended and ongoing processes that foster capabilities for collective action.}, - keywords = {Coproduction,Design,Experiential futures,Imaginaries,Sustainability,Urban commons}, - file = {/Users/fabio/Zotero/storage/DQUA9QV7/Baibarac-Duignan_Medeşan_2023_‘Gluing’ alternative imaginaries of sustainable urban futures.pdf;/Users/fabio/Zotero/storage/VKIY228J/S0016328723001374.html} -} - -@article{Baier2017, - title = {Antilocality and {{Antiagreement}}}, - author = {Baier, Nico}, - year = {2017}, - journal = {Linguistic Inquiry}, - volume = {48}, - number = {2}, - pages = {367--377}, - issn = {0024-3892}, - doi = {10.1162/ling_a_00246}, - abstract = {Various languages allowinstances of external possession \textendash{} possessive encodingwith- out a possessive structure in DP. The analysis of these cases has long been a battle- ground of raising versus control. I provide a new argument in support of posses- sor raising of a type thematically parallel to raising to subject. The possessor phrase moves froma possessum-DP-internal position to an a-thematic A-positionwithin vP. Like raising to subject, thismovement is obligatory and does not result in the assign- ment of a newtheta-role to themoving element.}, - file = {/Users/fabio/Zotero/storage/FXNK5YHQ/Antilocality and Antiagreement.pdf} -} - -@article{Bailey2006, - title = {Walden {{University}}}, - author = {Bailey, William C}, - year = {2006}, - doi = {10.1111/j.1467-8616.2008.00521.x Malik,}, - isbn = {9781124417004}, - pmid = {855823333} -} - -@article{Bakar2010, - title = {Analysis on Fused Deposition Modelling Performance}, - author = {Bakar, Nur Saaidah Abu and Alkahari, Mohd Rizal and Boejang, Hambali}, - year = {2010}, - month = dec, - journal = {Journal of Zhejiang University SCIENCE A}, - volume = {11}, - number = {12}, - pages = {972--977}, - issn = {1673-565X}, - doi = {10.1631/jzus.A1001365}, - urldate = {2013-03-10}, - keywords = {10,1631,a1001365,dimensional accuracy,doi,fdm,fused deposition modelling,jzus,rapid prototyping,rp,surface roughness}, - file = {/Users/fabio/Zotero/storage/IEAT6V8R/Bakar, Alkahari, Boejang - 2010 - Analysis on fused deposition modelling performance.pdf} -} - -@article{bakarakituranCurrentStatusStudies2021, - title = {Current Status of Studies on Microplastics in the World's Marine Environments}, - author = {Bakaraki Turan, Nouha and Sari Erkan, Hanife and Onkal Engin, Guleda}, - year = {2021}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {327}, - pages = {129394}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129394}, - urldate = {2021-11-06}, - abstract = {Microplastics (MPs) are considered a new type of pollutant that invades different environmental regions. The gradual increase in consumption of plastic products has led to its abundance in the ecosystem as a result of degradation of larger plastics into smaller particles. A great scientific interest in this topic arose from a series of unknowns that fell into different research disciplines. This review aims to take a look at the latest research papers on the detection of MPs in the world's marine environments. Some of the recent studies performed in the marine environments of the Atlantic, Pacific, Indian, Arctic, and Southern regions are listed in this study. The highest number of MPs were found mainly in the Pacific ocean with an average concentration of 918 items/m3. However, the occurrence of MPs in the Atlantic, Arctic, Indian and Southern oceans reduced to 7.68 item/m3, 0.7 item/m3, 0.32 item/m3 and 0.022 items/m3, respectively. Average MPs concentration reported are based on the case studies listed in this paper. Additionally, this paper highlights the variety of equipment used for the detection of MPs in seawater and deep seawater. On the other hand, the mitigation of MPs occurrence was discussed noting the urgent need for global cooperation to reduce the use of plastics and increase the use of biodegradable and bioplastics. Finally, the importance of this study remains in the broad screening of MPs in the world's marine environment underlying existing research gaps and possible mitigation methods for MPs reduction.} -} - -@article{bakirliogluColearningSustainableDesign2020, - ids = {Bakrloglu2020}, - title = {Co-Learning for {{Sustainable Design}}: {{The Case}} of a {{Circular Design Collaborative Project}} in {{Ireland}}}, - author = {Bak{\i}rl{\i}o{\u g}lu, Yekta and McMahon, Muireann}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - pages = {123474}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123474}, - urldate = {2020-08-13} -} - -@article{bakkerUnderstandingManagingProduct2020, - title = {Understanding and {{Managing Product Lifetimes}} in Support of a {{Circular Economy}}}, - author = {Bakker, C.A. and Mugge, R. and Boks, C. and Oguchi, M.}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - pages = {123764}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123764}, - urldate = {2020-08-24} -} - -@article{Bakrloglu2019, - title = {Framing {{Open Design}} through {{Theoretical Concepts}} and {{Practical Applications}}: {{A Systematic Literature Review}}}, - author = {Bak{\i}rl{\i}o{\u g}lu, Yekta and Kohtala, Cindy}, - year = {2019}, - month = sep, - journal = {Human\textendash Computer Interaction}, - volume = {34}, - number = {5-6}, - pages = {389--432}, - publisher = {{Taylor \& Francis}}, - issn = {0737-0024}, - doi = {10.1080/07370024.2019.1574225}, - abstract = {This study reports on the results of a systematic literature review on `open design' in academic fields including and beyond design and HCI. The review investigates how studies are framed as open design and open-source design (including `open hardware'): how researchers contribute to conceptual theorizing about open design or study its practical operationalization, in do-it-yourself `making,' manufacturing and practices in-between these domains. Most of the papers reviewed were empirical studies from diverse fields. Open design was analyzed not only as contributions and solutions, but also as open-to-participate processes, openly shared processes, and open, closed, and modular (open and closed) outcomes. Various research fields presented an open design framing as an alternative to the status quo: new ways to do business and/or to foster socio-environmental sustainability. On the manufacturing side, open design was sought especially to accelerate innovation cycles; on the making side, it was espoused to foster democratization. However, the studies reviewed indicated that companies do not appear to develop much beyond business-as-usual. From the research perspective, the conceptual potential of open design to promote sustainability saw little practical exploration. Additionally, issues around open design community governance and ownership, safety and reliability of open outcomes require further investigation.}, - file = {/Users/fabio/Zotero/storage/48HM4HGC/Framing Open Design through Theoretical Concepts and Practical Applications A Systematic Literature Review.pdf} -} - -@article{Bakshi2014a, - title = {Methods and Tools for Sustainable Process Design}, - author = {Bakshi, Bhavik R.}, - year = {2014}, - month = nov, - journal = {Current Opinion in Chemical Engineering}, - volume = {6}, - pages = {69--74}, - publisher = {{Elsevier}}, - issn = {22113398}, - doi = {10.1016/j.coche.2014.09.005}, - urldate = {2021-09-06}, - abstract = {Highlights Chemical engineering contributes to degrading ecosystems that sustain human well-being.Sustainable process design accounts for life cycle environmental impacts.Recent advances consider multiple objectives, and social aspects.Shortcomings include their inability to account for the full life cycle.Another shortcoming of SPD is ignorance of the role and status of ecosystems.}, - file = {/Users/fabio/Zotero/storage/PU4T8H96/Bakshi - 2014 - Methods and tools for sustainable process design This review comes from a themed issue on Process systems engineering.pdf} -} - -@article{Bakshi2015, - title = {Techno-{{Ecological Synergy}}: {{A Framework}} for {{Sustainable Engineering}}}, - author = {Bakshi, Bhavik R and Ziv, Guy and Lepech, Michael D}, - year = {2015}, - month = feb, - journal = {Environmental Science \& Technology}, - volume = {49}, - number = {3}, - pages = {1752--1760}, - issn = {0013-936X}, - doi = {10.1021/es5041442}, - urldate = {2021-09-03}, - abstract = {Even though the importance of ecosystems in sustaining all human activities is well-known, methods for sustainable engineering fail to fully account for this role of nature. Most methods account for the demand for ecosystem services, but almost none account for the supply. Incomplete accounting of the very foundation of human well-being can result in perverse outcomes from decisions meant to enhance sustainability and lost opportunities for benefiting from the ability of nature to satisfy human needs in an economically and environmentally superior manner. This paper develops a framework for understanding and designing synergies between technological and ecological systems to encourage greater harmony between human activities and nature. This framework considers technological systems ranging from individual processes to supply chains and life cycles, along with corresponding ecological systems at multiple spatial scales ranging from local to global. The demand for specific ecosystem services is determined from information about emissions and resource use, while the supply is obtained from information about the capacity of relevant ecosystems. Metrics calculate the sustainability of individual ecosystem services at multiple spatial scales and help define necessary but not sufficient conditions for local and global sustainability. Efforts to reduce ecological overshoot encourage enhancement of life cycle efficiency, development of industrial symbiosis, innovative designs and policies, and ecological restoration, thus combining the best features of many existing methods. Opportunities for theoretical and applied research to make this framework practical are also discussed.}, - pmid = {25560912}, - file = {/Users/fabio/Zotero/storage/9AHUE37V/full-text.pdf} -} - -@article{Bakshi2018, - title = {Claiming {{Sustainability}}: {{Requirements}} and {{Challenges}}}, - author = {Bakshi, Bhavik R and Gutowski, Timothy G and Sekulic, Dusan P}, - year = {2018}, - month = mar, - journal = {ACS Sustainable Chemistry \& Engineering}, - volume = {6}, - number = {3}, - pages = {3632--3639}, - issn = {2168-0485}, - doi = {10.1021/acssuschemeng.7b03953}, - urldate = {2021-09-20}, - abstract = {Despite the strong desire to find solutions that enable sustainable development, understanding of the requirements that methods must satisfy to guide technological development toward sustainability is still quite limited. We address this challenge based on a meta-principle for sustainability: human activities should not exceed critical ecosystem capacity, and by translating this principle into six specific requirements that sustainability assessment methods should satisfy. These necessary but not sufficient requirements are to ensure that decisions made by these methods do not demand more from ecosystems than can be supplied, and actions meant to reduce environmental impact do not shift the problem outside the system boundary. By applying these requirements to existing methods, we identify their benefits and shortcomings, and use this insight to suggest a multidisciplinary path forward. This path requires integration of methods for engineering design, with methods for considering spatial effects, socioeconomic interactions, and human-natural system interactions. Such integration poses challenges and opportunities for multidisciplinary research toward solutions for sustainable development.}, - keywords = {Cradle to cradle,Eco-efficiency,Ecosystem services,Life cycle assessment,Rebound effect,Triple bottomline}, - file = {/Users/fabio/Zotero/storage/M6X3GJBZ/full-text.pdf} -} - -@book{Bakshi2018a, - title = {Including {{Nature}} in {{Engineering}} for {{Innovation}} and {{Sustainability}}: {{Promise}}, {{Progress}} and {{Peril}}}, - author = {Bakshi, Bhavik R.}, - year = {2018}, - journal = {Computer Aided Chemical Engineering}, - volume = {44}, - publisher = {{Elsevier Masson SAS}}, - issn = {15707946}, - doi = {10.1016/B978-0-444-64241-7.50006-9}, - abstract = {Modern engineering keeps ecological systems outside its decision boundary, even though goods and services from nature are essential for sustaining all its activities. This has been the system boundary at least since the industrial revolution when the human footprint was quite small, and nature seemed infinite. With this situation having reversed in the modern world, there is an urgent need to change the engineering paradigm from one that takes nature for granted to one that accounts for the role of nature and works with it while respecting its limits. In this article we argue that such a paradigm shift holds the promises of enabling sustainability and innovation by developing engineering that benefits from nature's ability to treat emissions and provide resources in an economically viable and environmentally sustainable manner. We provide an overview of recent progress in including nature in engineering, for tasks such as design of processes and supply chains, and for life cycle assessment. Despite the promise of including nature in engineering, there are also risks if this inclusion is not done properly. Current methods tend to commodify nature due to which holistic characteristics of ecosystems such as biodiversity and resilience could be lost. The tendency of wanting to over-engineer ecosystems may also need to be restrained.}, - isbn = {978-0-444-64241-7}, - keywords = {Design,Ecosystem services,Innovation,Life Cycle Assessment,Paradigm shift,Sustainability}, - file = {/Users/fabio/Zotero/storage/38WW7E94/bakshi2018.pdf} -} - -@article{Bakshi2019, - title = {Book {{Review}} of {{Energy}}, {{Complexity}} and {{Wealth Maximization}} by {{Robert Ayres}}}, - author = {Bakshi, Bhavik}, - year = {2019}, - month = apr, - journal = {Journal of Industrial Ecology}, - volume = {23}, - number = {2}, - pages = {510--511}, - issn = {1088-1980}, - doi = {10.1111/jiec.12821}, - urldate = {2021-09-20}, - file = {/Users/fabio/Zotero/storage/C8AN8X6T/Bakshi - 2019 - Book Review of Energy, Complexity and Wealth Maximization by Robert Ayres.pdf} -} - -@article{Bakshi2019a, - title = {Toward Sustainable Chemical Engineering: {{The}} Role of Process Systems Engineering}, - author = {Bakshi, Bhavik R}, - year = {2019}, - journal = {Annual Review of Chemical and Biomolecular Engineering}, - volume = {10}, - pages = {265--288}, - issn = {19475438}, - doi = {10.1146/annurev-chembioeng-060718-030332}, - urldate = {2021-09-02}, - abstract = {Products from chemical engineering are essential for human well-being, but they also contribute to the degradation of ecosystem goods and services that are essential for sustaining all human activities. To contribute to sustainability, chemical engineering needs to address this paradox by developing chemical products and processes that meet the needs of present and future generations. Unintended harm of chemical engineering has usually appeared outside the discipline's traditional system boundary due to shifting of impacts across space, time, flows, or disciplines, and exceeding nature's capacity to supply goods and services. Being a subdiscipline of chemical engineering, process systems engineering (PSE) is best suited for ensuring that chemical engineering makes net positive contributions to sustainable development. This article reviews the role of PSE in the quest toward a sustainable chemical engineering. It focuses on advances in metrics, process design, product design, and process dynamics and control toward sustainability. Efforts toward contributing to this quest have already expanded the boundary of PSE to consider economic, environmental, and societal aspects of processes, products, and their life cycles. Future efforts need to account for the role of ecosystems in supporting industrial activities, and the effects of human behavior and markets on the environmental impacts of chemical products. Close interaction is needed between the reductionism of chemical engineering science and the holism of process systems engineering, along with a shift in the engineering paradigm from wanting to dominate nature to learning from it and respecting its limits.}, - pmid = {30916991}, - keywords = {Holistic research,Process and product design,Process control,Reductionism,Sustainability metrics,Sustainable development}, - file = {/Users/fabio/Zotero/storage/IEWV4Q5L/full-text.pdf} -} - -@article{Bakshi2019b, - title = {Engineering, Markets, and Human Behavior: An Essential Integration for Decisions toward Sustainability}, - author = {Bakshi, Bhavik R and Ghosh, Tapajyoti and Lee, Kyuha}, - year = {2019}, - journal = {Current Opinion in Chemical Engineering}, - volume = {26}, - pages = {164--169}, - issn = {22113398}, - doi = {10.1016/j.coche.2019.10.004}, - urldate = {2021-09-20}, - abstract = {The environmental impact of an engineered system depends on factors such as economic policies, efficiency of the technology, and the extent to which it is used in society. Methods for making decisions toward sustainability certainly account for technological aspects such as efficiency, but have been lacking in accounting for the broader economic implications such as the effect of markets and human behavior. These shortcomings can result in perverse outcomes: improvement in efficiency may increase environmental impact by encouraging greater consumption. Recent advances in sustainability assessment include methods that range from ignoring the economy to considering price changes and elasticity effects. Methods for sustainable process design are accounting for the macroeconomy by extending the process-to-planet framework to include partial and general equilibrium models of the economy. Such methods are needed to account for the role of the economy and society in determining the impact and sustainability of engineered systems.}, - file = {/Users/fabio/Zotero/storage/LC9SW3L7/full-text.pdf} -} - -@article{bakshiACSSustainableChemistry2021, - title = {{{ACS Sustainable Chemistry}} \& {{Engineering Invites Contributions}} to a {{Virtual Special Issue}} on {{The Circular Economy}} of {{Plastics}}}, - author = {Bakshi, Bhavik R. and Shonnard, David and Allen, David T.}, - year = {2021}, - month = feb, - journal = {ACS Sustainable Chemistry \& Engineering}, - volume = {9}, - number = {4}, - pages = {1425--1426}, - publisher = {{American Chemical Society}}, - doi = {10.1021/ACSSUSCHEMENG.1C00209}, - urldate = {2021-09-20}, - file = {/Users/fabio/Zotero/storage/NP6FHIX5/full-text.pdf} -} - -@article{Baldassarre2020, - title = {Addressing the Design-Implementation Gap of Sustainable Business Models by Prototyping: {{A}} Tool for Planning and Executing Small-Scale Pilots}, - author = {Baldassarre, Brian and Konietzko, Jan and Brown, Phil and Calabretta, Giulia and Bocken, Nancy and Karpen, Ingo O. and Hultink, Erik Jan}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {255}, - pages = {120295}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120295} -} - -@article{baldwinModelingParadigmShift2011, - title = {Modeling a Paradigm Shift: {{From}} Producer Innovation to User and Open Collaborative Innovation}, - author = {Baldwin, Carliss and {von Hippel}, Eric}, - year = {2011}, - month = nov, - journal = {Organization Science}, - volume = {22}, - number = {6}, - pages = {1399--1417}, - issn = {10477039}, - doi = {10.1287/orsc.1100.0618}, - urldate = {2021-06-10}, - abstract = {In this paper, we assess the economic viability of innovation by producers relative to two increasingly important alternative models: innovations by single-user individuals or firms and open collaborative innovation. We analyze the design costs and architectures and communication costs associated with each model. We conclude that both innovation by individual users and open collaborative innovation increasingly compete with and may displace producer innovation in many parts of the economy. We explain why this represents a paradigm shift with respect to innovation research, policy making, and practice. We discuss important implications and offer suggestions for further research. \textcopyright{} 2011 INFORMS.}, - keywords = {Collaborative innovation,Modularity,Open innovation,User innovation}, - file = {/Users/fabio/Zotero/storage/DA9AAPKD/full-text.pdf} -} - -@article{ballandNewParadigmEconomic2022, - title = {The New Paradigm of Economic Complexity}, - author = {Balland, Pierre-Alexandre and Broekel, Tom and Diodato, Dario and Giuliani, Elisa and Hausmann, Ricardo and O'Clery, Neave and Rigby, David}, - year = {2022}, - month = apr, - journal = {Research Policy}, - volume = {51}, - number = {3}, - pages = {104450}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104450}, - urldate = {2022-01-17} -} - -@article{ballardBoundaryObjectsTranslation2021, - title = {Boundary Objects in Translation: The Role of Language in Participatory System Dynamics Modeling}, - author = {Ballard, Ellis and Werner, Kelsey and Priyadashini, Pratiti}, - year = {2021}, - month = oct, - journal = {System Dynamics Review}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1099-1727}, - doi = {10.1002/SDR.1694}, - urldate = {2021-11-07}, - abstract = {Participatory system dynamics modeling provides tools to represent and improve mental models through stakeholder participation. A hallmark of this approach is the creation and management models as boundary objects. With a proliferation of participatory modeling in diverse contexts, new methodological challenges have emerged around the role of language and translation. This article identifies a gap in the literature around the challenge of language, literacy, and linguistic translation in participatory modeling practice and examines examples from an emerging body of international practice. The authors present a case study that uses visuals to bridge multiple linguistic and literacy divides in workshops in rural India. The authors delineate a preliminary set of language configurations for boundary-object engagement to clarify design choices of modelers and facilitators. They close with a discussion of the need to assess and document facilitation and language choices and propose opportunities to strengthen practical guidance for the field.}, - file = {/Users/fabio/Zotero/storage/LLGUJMS5/full-text.pdf} -} - -@article{ballardiniDevelopingNovelProperty2021, - title = {Developing Novel Property Concepts in Private Law to Foster the Circular Economy}, - author = {Ballardini, Rosa Maria and Kaisto, Janne and Simil{\"a}, Jukka}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {279}, - pages = {123747}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123747}, - urldate = {2020-08-31}, - file = {/Users/fabio/Zotero/storage/BKZD8ZQ3/full-text.pdf} -} - -@article{ballatoreThisCityNot2021, - title = {This City Is Not a Bin: {{Crowdmapping}} the Distribution of Urban Litter}, - author = {Ballatore, Andrea and Verhagen, Teun Johannes and Li, Zhije and Cucurachi, Stefano}, - year = {2021}, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13164}, - urldate = {2022-01-25}, - abstract = {Urban litter, such as cans, packaging, and cigarettes, has significant impacts, and yet little is known about its spatio-temporal distribution, with little available data. In contexts of data scarcity, crowdsourcing provides a low-cost approach to collecting a large amount of geo-referenced data. We consider 1.7 million litter observations in the Netherlands, collected by the crowdmapping project Litterati. First, we analyze the biases of this data at the province and municipality level. Second, in a local case study with high-quality data (the city of Purmerend), we investigate the spatial distribution of urban litter and the points of interest that attract it. This study's findings can support both the crowdmapping process, steer volunteers' efforts, and policy-making to tackle litter at the urban level. This article met the requirements for a gold\textendash gold JIE data openness badge described at http://jie.click/badges.}, - keywords = {crowdmapping,data analysis,litter,Litterati,spatial analysis,waste}, - file = {/Users/fabio/Zotero/storage/E5TVWMRU/full-text.pdf} -} - -@article{Balletti2017, - title = {{{3D}} Printing: {{State}} of the Art and Future Perspectives}, - author = {Balletti, Caterina and Ballarin, Martina and Guerra, Francesco}, - year = {2017}, - journal = {Journal of Cultural Heritage}, - publisher = {{Elsevier Masson SAS}}, - issn = {12962074}, - doi = {10.1016/j.culher.2017.02.010}, - file = {/Users/fabio/Zotero/storage/IFRQAJBN/3D printing State of the art and future perspectives.pdf} -} - -@inproceedings{Ballon2005b, - title = {Test and Experimentation Platforms for Broadband Innovation: Examining {{European}} Practice}, - booktitle = {Proceedings of 16th {{European Regional Conference}} by the {{International Telecommunications Society}} ({{ITS}})}, - author = {Ballon, Pieter and Pierson, Jo and Delaere, Simon}, - year = {2005}, - month = sep, - address = {{Porto}} -} - -@article{Balsa-Barreiro2019, - title = {Globalization and the Shifting Centers of Gravity of World's Human Dynamics: {{Implications}} for Sustainability}, - author = {{Balsa-Barreiro}, Jos{\'e} and Li, Yingcheng and Morales, Alfredo and Pentland, Alex ``Sandy''}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {117923}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117923} -} - -@article{balvaneraEcosystemServicesResearch2020, - title = {Ecosystem Services Research in {{Latin America}} 2.0: {{Expanding}} Collaboration across Countries, Disciplines, and Sectors}, - author = {Balvanera, Patricia and {P{\'e}rez-Harguindeguy}, Natalia and Perevochtchikova, Mar{\'i}a and Laterra, Pedro and C{\'a}ceres, Daniel M. and {Langle-Flores}, Alfonso}, - year = {2020}, - month = apr, - journal = {Ecosystem Services}, - volume = {42}, - pages = {101086}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2020.101086}, - urldate = {2021-04-23}, - abstract = {Ecosystem services research in Latin America has been steadily growing and has advanced conceptual understandings, methodological approaches, and global policy applications. One key element for the success of ecosystem services research is expanding collaboration across disciplines, countries, and sectors. This paper sets the stage for the special issue on The state of the art of Ecosystem Services Research and Practice in Latin America that resulted from such collaborations and the resulting insights. To do so we: 1 \textendash{} present a recent overview of ecosystem services research in Latin America, 2 \textendash{} assess the role of the network organizing International Congresses on Ecosystem Services in the Neotropics (CISEN, from its initials in Spanish) in fostering collaborations across countries, sectors, research topics, and disciplines, 3 \textendash{} describe how this special issue was conceived and operationalized to further break collaboration silos and advance understanding, and 4 \textendash{} present an overview of the papers included in this special issue. Finally, we discuss the challenges and opportunities for future contribution of Latin American research to the rapidly evolving Ecosystem Services literature.}, - keywords = {Collaboration,Inequity,Systematic literature review,Trans-discipline} -} - -@article{bandariPrioritisingSustainableDevelopment2021, - title = {Prioritising {{Sustainable Development Goals}}, Characterising Interactions, and Identifying Solutions for Local Sustainability}, - author = {Bandari, Reihaneh and Moallemi, Enayat A. and Lester, Rebecca E. and Downie, David and Bryan, Brett A.}, - year = {2021}, - month = oct, - journal = {Environmental Science \& Policy}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.09.016}, - urldate = {2021-11-07} -} - -@article{bandyopadhyayProcessingPiezocompositesFused1997, - title = {Processing of {{Piezocomposites}} by {{Fused Deposition Technique}}}, - author = {Bandyopadhyay, Amit and Panda, Raj K and Janas, Victor F and Agarwala, Mukesh K and Danforth, Stephen C and Safari, Ahmad}, - year = {1997}, - volume = {72}, - pages = {1366--1372}, - file = {/Users/fabio/Zotero/storage/DD9TK3VP/Bandyopadhyay et al. - 1997 - Processing of Piezocomposites by Fused Deposition Technique.pdf} -} - -@article{Bangcheng2007, - title = {Organizational Innovation and Human Resource Practice: {{A}} View of Strategic Human Resource Bundling}, - author = {Bangcheng, Liu and Xiaomei, Zhu and Ningyu, Tang}, - year = {2007}, - journal = {Proceedings - ICSSSM'07: 2007 International Conference on Service Systems and Service Management}, - number = {1995}, - doi = {10.1109/ICSSSM.2007.4280086}, - abstract = {There are many literatures focusing on relationships between human resource practices and organizational performance improvement and competitive advantages, but there are few on relationships between human resource practices and organizational innovation. Based on 74 samples, we find though organizations pay many attentions to human resource practices, but individual human resource practice has no significant effect on organizational innovation, while systematical, strategic, human resource bundling practices has significant effect on organizational innovation.}, - isbn = {1424408857}, - keywords = {Human resource management practice,Innovational competency,Strategic human resource bundling} -} - -@techreport{Banguru2010, - title = {Rapid {{Prototyping Report}}}, - author = {Banguru, C.}, - year = {2010}, - pages = {67}, - abstract = {comparaci\'on entre sistemas de prototipado rapido}, - isbn = {185233360X}, - file = {/Users/fabio/Zotero/storage/FQMXCK3K/Rapid Prototyping Report.pdf} -} - -@article{bankPlasticCycleNovel2019, - title = {The {{Plastic Cycle}}: {{A Novel}} and {{Holistic Paradigm}} for the {{Anthropocene}}}, - shorttitle = {The {{Plastic Cycle}}}, - author = {Bank, Michael S. and Hansson, Sophia V.}, - year = {2019}, - month = jul, - journal = {Environmental Science \& Technology}, - volume = {53}, - number = {13}, - pages = {7177--7179}, - publisher = {{American Chemical Society}}, - issn = {0013-936X}, - doi = {10.1021/acs.est.9b02942}, - urldate = {2022-09-01}, - file = {/Users/fabio/Zotero/storage/72J6J3LY/Bank y Hansson - 2019 - The Plastic Cycle A Novel and Holistic Paradigm f.pdf;/Users/fabio/Zotero/storage/NLHUL6T7/acs.est.html} -} - -@article{Banks2019, - title = {Answers to 18 {{Questions About Open Science Practices}}}, - author = {Banks, George C. and Field, James G. and Oswald, Frederick L. and O'Boyle, Ernest H. and Landis, Ronald S. and Rupp, Deborah E. and Rogelberg, Steven G.}, - year = {2019}, - month = jun, - journal = {Journal of Business and Psychology}, - volume = {34}, - number = {3}, - pages = {257--270}, - publisher = {{Springer New York LLC}}, - issn = {08893268}, - doi = {10.1007/s10869-018-9547-8}, - urldate = {2020-03-27}, - abstract = {Open science refers to an array of practices that promote openness, integrity, and reproducibility in research; the merits of which are being vigorously debated and developed across academic journals, listservs, conference sessions, and professional associations. The current paper identifies and clarifies major issues related to the use of open science practices (e.g., data sharing, study pre-registration, open access journals). We begin with a useful general description of what open science in organizational research represents and adopt a question-and-answer format. Through this format, we then focus on the application of specific open science practices and explore future directions of open science. All of this builds up to a series of specific actionable recommendations provided in conclusion, to help individual researchers, reviewers, journal editors, and other stakeholders develop a more open research environment and culture.}, - keywords = {Open science,Philosophy of science,Questionable research practices,Research ethics}, - file = {/Users/fabio/Zotero/storage/RA6ZP9BA/full-text.pdf} -} - -@article{Bano2020, - title = {{{AIoT-Based Smart Bin}} for {{Real-Time Monitoring}} and {{Management}} of {{Solid Waste}}}, - author = {Bano, Aniqa and Ud Din, Ikram and {Al-Huqail}, Asma A.}, - year = {2020}, - journal = {Scientific Programming}, - volume = {2020}, - publisher = {{Hindawi Limited}}, - issn = {10589244}, - doi = {10.1155/2020/6613263}, - urldate = {2021-09-30}, - abstract = {In the current time, the immense growth in population creates unhygienic environment for the citizen of a society with respect to waste generation. This rapid generation of waste leads to various infectious diseases in the environment. As followed by the traditional municipal system, in our surroundings, we can see over flooding of solid waste in the garbage bins. Solid waste management is a pivotal aspect in traditional systems and it is becoming dangerous in most populated areas. Arduous labor works and costs are required to manage and monitor garbage bins in real time. To maintain the cleanliness of a city and for real-time monitoring of trash bins, a smart bin mechanism (SBM) for smart cities is proposed in this paper, which is based on Artificial Intelligent of Things (AIoT). The SBM works on the 3R concept, that is, Reduce, Recycle, and Reuse. The SBM has the access to get real-time information about each bin and avoid overloading of these bins. The proposed framework reduces the labor cost and saves time and energy of the system. It also reduces the rate of disease infections by keeping the cities clean. Fuzzy logic is used for decision-making in selecting appropriate locations in the cities to install trash bins. The framework is implemented in the multiagent modeling environment, that is, NetLogo.}, - file = {/Users/fabio/Zotero/storage/Z6SVFC4U/full-text.pdf} -} - -@phdthesis{Bansal2011, - title = {Improving Dimensional Accuracy of Fused Deposition Modelling ({{FDM}}) Parts Using Response Surface Methodology}, - author = {Bansal, Rajan}, - year = {2011}, - school = {National Institute of Technology}, - file = {/Users/fabio/Zotero/storage/74WC65BZ/Bansal - 2011 - Improving dimensional accuracy of fused deposition modelling (FDM) parts using response surface methodology.pdf} -} - -@article{Banyai2019, - title = {Optimization of {{Municipal Waste Collection Routing}}: {{Impact}} of {{Industry}} 4.0 {{Technologies}} on {{Environmental Awareness}} and {{Sustainability}}}, - author = {B{\'a}nyai, Tam{\'a}s and Tam{\'a}s, P{\'e}ter and Ill{\'e}s, B{\'e}la and Stankevi{\v c}i{\=u}t{\.e}, {\v Z}ivil{\.e} and B{\'a}nyai, {\'A}gota}, - year = {2019}, - month = feb, - journal = {International Journal of Environmental Research and Public Health}, - volume = {16}, - number = {4}, - pages = {634}, - issn = {1660-4601}, - doi = {10.3390/ijerph16040634}, - abstract = {The accelerated movement of people towards cities led to the fact that the world's urban population is now growing by 60-million persons per year. The increased number of cities' population has a significant impact on the produced volume of household waste, which must be collected and recycled in time. The collection of household waste, especially in downtown areas, has a wide range of challenges; the collection system must be reliable, flexible, cost efficient, and green. Within the frame of this paper, the authors describe the application possibilities of Industry 4.0 technologies in waste collection solutions and the optimization potential in their processes. After a systematic literature review, this paper introduces the waste collection process of downtowns as a cyber-physical system. A mathematical model of this waste collection process is described, which incorporates routing, assignment, and scheduling problems. The objectives of the model are the followings: (1) optimal assignment of waste sources to garbage trucks; (2) scheduling of the waste collection through routing of each garbage truck to minimize the total operation cost, increase reliability while comprehensive environmental indicators that have great impact on public health are to be taken into consideration. Next, a binary bat algorithm is described, whose performance is validated with different benchmark functions. The scenario analysis validates the model and then evaluates its performance to increase the cost-efficiency and warrant environmental awareness of waste collection process.} -} - -@article{Barbier2019, - title = {The Concept of Natural Capital}, - author = {Barbier, Edward B}, - year = {2019}, - month = jan, - journal = {Oxford Review of Economic Policy}, - volume = {35}, - number = {1}, - pages = {14--36}, - publisher = {{Oxford Academic}}, - issn = {0266-903X}, - urldate = {2021-08-29}, - keywords = {ecosystem services,green accounting,natural resources,O13,planetary boundaries,Q56,Q57,sovereign wealth funds,sustainable development,sustainable development JEL classification: Q01}, - file = {/Users/fabio/Zotero/storage/VFG74HHL/Barbier - Unknown - The concept of natural capital.pdf} -} - -@article{Barcenilla2009b, - title = {L'acceptabilit\'e Des Nouvelles Technologies : Quelles Relations Avec l'ergonomie, l'utilisabilit\'e et l'exp\'erience Utilisateur ?}, - author = {Barcenilla, J and Bastien, J.-M.-Christian}, - year = {2009}, - journal = {Le travail humain}, - volume = {72}, - number = {4}, - pages = {311--331}, - issn = {0041-1868}, - doi = {10.3917/th.724.0311}, - abstract = {Nous assistons actuellement \`a un foisonnement de concepts et de m\'ethodolo- gies, qui gravitent autour de l'id\'ee selon laquelle les produits et les syst\`emes tech- niques que l'on utilise, aussi bien dans le monde du travail que dans la vie quoti- dienne, doivent satisfaire \`a un certain nombre de crit\`eres pour \^etre accept\'es et utilis\'es dans de bonnes conditions. Ces nouvelles conceptions (notamment celles qui gravitent autour de la notion d' \guillemotleft{} exp\'erience utilisateur \guillemotright ) obligent l'ergo- nomie \`a se questionner sur la place qu'elle occupe dans la conception de produits et de syst\`emes techniques, sur ses apports et ses emprunts disciplinaires, et sur le renouvellement de ses outils m\'ethodologiques. Ce texte vise \`a rendre compte de ce questionnement et de ces \'evolutions.}, - isbn = {9782130573258} -} - -@inproceedings{Bardaji2013, - title = {Low-Cost Moored Instrumentation for Citizens' Education and Participation in Environmental Stewardship}, - booktitle = {2013 {{MTS}}/{{IEEE}} Ocean. - Bergen}, - author = {Bardaji, R. and Piera, J.}, - year = {2013}, - month = jun, - pages = {1--3}, - publisher = {{IEEE}}, - doi = {10.1109/OCEANS-Bergen.2013.6608176}, - isbn = {978-1-4799-0001-5} -} - -@article{barkhausenCombinationsMaterialFlow2023, - title = {Combinations of Material Flow Analysis and Life Cycle Assessment and Their Applicability to Assess Circular Economy Requirements in {{EU}} Product Regulations. {{A}} Systematic Literature Review}, - author = {Barkhausen, Robin and Rostek, Leon and Miao, Zoe Chunyu and Zeller, Vanessa}, - year = {2023}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {407}, - pages = {137017}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137017}, - urldate = {2023-05-02}, - abstract = {We conducted a systematic literature review of 44 prospective studies that apply the combination of material flow analysis and life cycle assessment. Our study investigates the characteristics of existing combinations and their applicability to policy impact assessments using the example of the EU Ecodesign Directive. Along with the increasing number of such publications in recent years, there is great variation in the type of modelling, spatial and temporal scope, study area and additional characteristics. Studies range from sequential analysis to integrated one-software modelling, and from considering only dynamic material flows to utilising dynamic life cycle inventory data. Most studies conduct country-scale analysis and the combination is applied across economic sectors. Combining material flow analysis and life cycle assessment approaches has high potential for assessing the long-term environmental implications of circular economy policy measures. Our review revealed a diverse landscape of existing studies and highlighted the integrated modelling of material flow analysis and life cycle assessment as a holistic and flexible approach with suitable characteristics for assessing circular economy measures under the ecodesign framework.}, - langid = {english}, - keywords = {Circular economy,Ecodesign directive impact assessment,Life cycle assessment,Material flow analysis,Product policy,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/HBEZTV4L/Barkhausen et al_2023_Combinations of material flow analysis and life cycle assessment and their.pdf;/Users/fabio/Zotero/storage/9E5QZ75F/S0959652623011757.html} -} - -@article{Barkoula2008, - title = {Fatigue Properties of Highly Oriented Polypropylene Tapes and All-Polypropylene Composites}, - author = {Barkoula, N. M. and Alcock, B. and Cabrera, N. O. and Peijs, T.}, - year = {2008}, - journal = {Polymers and Polymer Composites}, - volume = {16}, - number = {2}, - pages = {101--113}, - issn = {09673911}, - doi = {10.1002/pc}, - abstract = {This paper describes the fatigue behaviour of newly developed all-polypropylene (all-PP) tapes and composites, with reference to the composite processing conditions, testing temperature and making a comparison with commercial alternatives. All-PP tapes are highly oriented and their failure behaviour follows that of other highly oriented polymers. All-PP woven composites fail ultimately due to PP tape failure. However, this failure mode is accompanied by delamination of fabrics in the woven structure. Consolidation pressure plays a decisive role in controlling the interlaminar properties and hence the delamination resistance and furthermore the fatigue limit of the composite. Comparison of all-PP woven composites with commercial alternatives based on glass and natural fibres reveals the excellent relative performance of all-PP composites under fatigue loads. Fatigue properties of all-PP composites are however sensitive to the testing temperature, and elevated temperatures can lead to a rapid reduction of the fatigue resistance of these all-polymer systems.}, - isbn = {0967-3911} -} - -@article{barlazDevelopmentDesignBasis1994, - title = {Development of {{Design Basis}}}, - author = {Barlaz, By Morton A and Member, Associate and Haynie, Fred H and Overcash, Michael F}, - year = {1994}, - volume = {119}, - number = {5}, - pages = {798--810}, - file = {/Users/fabio/Zotero/storage/V6HR4JBU/Development of Design Basis.pdf} -} - -@article{barlettaOrganisationalSustainabilityReadiness2020, - title = {Organisational Sustainability Readiness: A Model and Assessment Tool for Manufacturing Companies}, - author = {Barletta, Ilaria and Despeisse, M{\'e}lanie and Hoffenson, Steven and Johansson, Bj{\"o}rn}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125404}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125404}, - urldate = {2020-12-14}, - file = {/Users/fabio/Zotero/storage/IK28ZESF/full-text.pdf} -} - -@article{barnes3DPrintingEcologically2022, - title = {{{3D}} Printing of Ecologically Active Soil Structures}, - author = {Barnes, S. and Kirssin, L. and Needham, E. and Baharlou, E. and Carr, D.E. and Ma, J.}, - year = {2022}, - month = feb, - journal = {Additive Manufacturing}, - pages = {102670}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102670}, - urldate = {2022-02-09} -} - -@article{barnikolProspectsAdvancedFrugal2022, - title = {The Prospects of Advanced Frugal Innovations in Different Economies}, - author = {Barnikol, Julian and Liefner, Ingo}, - year = {2022}, - month = aug, - journal = {Technology in Society}, - pages = {102081}, - issn = {0160-791X}, - doi = {10.1016/j.techsoc.2022.102081}, - urldate = {2022-08-16}, - abstract = {Existing research on frugal innovations underrates the potential for sustainability that arises from the development of advanced frugal innovations (AFI) and the widespread adoption of frugal design principles. Based on a distinction between advanced and unrefined frugal innovations, this article examines factors for AFI generation using the concept of innovation systems and the multi-level perspective, and discusses the differences arising from the contexts of emerging and advanced economies. The paper explains which institutional and systemic conditions support the development of advanced frugal innovations. In particular, it discusses the interplay of the actors, a common frugal mindset, and the institutional framework. The way these factors play out depends on the system and transition conditions in advanced and emerging economies. The paper shows that applying the perspective of AFI and frugal design principles opens a new perspective for research on frugal innovation.}, - langid = {english}, - keywords = {Advanced frugal innovation,Frugal design principles,Innovation systems,Multi-level perspective,Sustainability}, - file = {/Users/fabio/Zotero/storage/ZIM897AW/Barnikol y Liefner - 2022 - The prospects of advanced frugal innovations in di.pdf;/Users/fabio/Zotero/storage/H3J9MS53/S0160791X22002226.html} -} - -@article{barondoradoEMASEnvironmentalStatements2022, - title = {{{EMAS}} Environmental Statements as a Measuring Tool in the Transition of Industry towards a Circular Economy}, - author = {Bar{\'o}n Dorado, Alexandra and Gim{\'e}nez Leal, Gerusa and {de Castro Vila}, Rodolfo}, - year = {2022}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {369}, - pages = {133213}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133213}, - urldate = {2022-08-11}, - abstract = {One of the European Commission's main objectives within its Green Deal strategy is to encourage organisations to adopt a circular economy (CE). Although the Eco-Management and Audit Scheme (EMAS) regulation is highlighted as a tool to help firms evaluate, report and improve their advances in this direction, no studies have been found that empirically validate the usefulness of EMAS as a circularity measuring tool. To address this gap, this paper analyses the information reported in the EMAS statements and determines whether it really is useful to be able to measure the level of adoption of the circular model in companies. Content analysis and statistical methods (Kendall rank correlation coefficient and Pearson's Chi-Square Test) are employed to provide empirical evidence from 122 companies. Results show that the information reported in the statements analysed is neither extensive enough nor provided as scalable and comparable quantitative data to be able to consider EMAS as a valid tool to measure and report the progress of companies in the transition towards a more circular model. Outcomes of the study have useful implications for policy makers and companies. Recommendations to regulators centre on establishing specific circular key performance indicators within the EMAS regulation, which would help companies transition towards a CE. Recommendations to managers include using EMAS reporting in a more comprehensive and indicator-focused way, which could help them visualise their current situation more clearly and be able to compare themselves to others more effectively, thus moving towards circularity in a more targeted way.}, - langid = {english}, - keywords = {Circular economy,Eco-management and audit scheme,Environmental management system,Environmental reporting,Environmental statements,Indicators,Industrial companies}, - file = {/Users/fabio/Zotero/storage/WX5J2KW2/Barón Dorado et al_2022_EMAS environmental statements as a measuring tool in the transition of industry.pdf;/Users/fabio/Zotero/storage/H8HFDYBS/S0959652622028001.html} -} - -@article{barracloughMappingStakeholderNetworks2022, - title = {Mapping Stakeholder Networks for the Co-Production of Multiple Ecosystem Services: {{A}} Novel Mixed-Methods Approach}, - shorttitle = {Mapping Stakeholder Networks for the Co-Production of Multiple Ecosystem Services}, - author = {Barraclough, Alicia D. and Cusens, Jarrod and M{\aa}ren, Inger Elisabeth}, - year = {2022}, - month = aug, - journal = {Ecosystem Services}, - volume = {56}, - pages = {101461}, - issn = {2212-0416}, - doi = {10.1016/j.ecoser.2022.101461}, - urldate = {2022-08-11}, - abstract = {Governance of ecosystem services (ES) requires an understanding of the complex dynamics of collaboration (and contestation) of multiple stakeholders and multiple ES. However, many studies consider only a few ES or stakeholder groups. In our work, we map the co-production of multiple ES by multiple stakeholders connected through ES governance networks. Through a unique combination of Public Participatory Geographic Information Systems (PPGIS), stakeholder focus groups, surveys, and social network analysis, we reveal insights on social-ecological fit of ES co-production across an area unified by a UNESCO Biosphere Reserve designation. By overlaying relationships between stakeholders, multiple ES, and ES co-production networks, our results reveal gaps and mismatches in the ES governance system. We identified mismatches between those ES most valued by the region's inhabitants and those managed, governed and studied by relevant institutions and stakeholders. Cultural ES were the most highly appreciated by stakeholders, but social networks of cultural ES governance were the least densely connected, with highly influential stakeholders involved in cultural ES management (e.g., farmers), not well connected to the governance network. Thus, our findings point to a weakness in cultural ES governance and the need of incorporating cultural ES more clearly into natural resource management agendas. Our results show the importance of mapping what is being discussed by whom, and that mapping environmental governance networks alone does not necessarily provide sufficient resolution to understand co-production of different ES. We confirm the difficulties of governing ES when the ES providers and/or beneficiaries operate at different or distant scales, the scale of ecological processes does not match management (e.g., in some regulating and maintenance ES), or stakeholders which are important in affecting ES provision are not involved in governance, resulting in social-ecological misfit. Lastly, our work confirms the broad array of research methods needed to capture the complexity of governing multiple ES.}, - langid = {english}, - keywords = {Biosphere reserve,Ecosystem service cascade,Ecosystem service governance,Ecosystem service management,Social network analysis,UNESCO biosphere reserve}, - file = {/Users/fabio/Zotero/storage/YDXUDKSJ/Barraclough et al_2022_Mapping stakeholder networks for the co-production of multiple ecosystem.pdf;/Users/fabio/Zotero/storage/RXWV3YQB/S2212041622000572.html} -} - -@article{barrettOpenInnovationHightech2021, - title = {Open Innovation within High-Tech {{SMEs}}: {{A}} Study of the Entrepreneurial Founder's Influence on Open Innovation Practices}, - author = {Barrett, Gillian and Dooley, Lawrence and Bogue, Joe}, - year = {2021}, - month = feb, - journal = {Technovation}, - pages = {102232}, - publisher = {{Elsevier}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2021.102232}, - urldate = {2021-02-14} -} - -@article{Barring2015, - title = {Experience of Public Procurement of {{Open Compute}} Servers}, - author = {B{\"a}rring, Olof and Guerri, Marco and Bonfillou, Eric and Valsan, Liviu and Grigore, Alexandru and Dore, Vincent and Gentit, Alain and Clement, Beno{\^i}t and Grossir, Anthony}, - year = {2015}, - month = dec, - journal = {Yamada Conference Lx On Research in High Magnetic Fields}, - volume = {664}, - number = {5}, - pages = {052004}, - issn = {1742-6588}, - doi = {10.1088/1742-6596/664/5/052004} -} - -@article{barriosConsensusDelphiMethod2020, - title = {Consensus in the Delphi Method: {{What}} Makes a Decision Change?}, - author = {Barrios, Maite and Guilera, Georgina and Nu{\~n}o, Laura and {G{\'o}mez-Benito}, Juana}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - pages = {120484}, - publisher = {{Elsevier BV}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120484}, - urldate = {2020-12-14} -} - -@article{barrosCircularityMeasurementExternal2023, - title = {Circularity Measurement of External Resource Flows in Companies: {{The}} Circular Flow Tool}, - shorttitle = {Circularity Measurement of External Resource Flows in Companies}, - author = {Barros, Murillo Vetroni and Salvador, Rodrigo and {Gallego-Schmid}, Alejandro and Piekarski, Cassiano Moro}, - year = {2023}, - month = mar, - journal = {Waste Management}, - volume = {158}, - pages = {136--145}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.01.001}, - urldate = {2023-02-09}, - abstract = {Unlike the linear model ``take-make-use-dispose'', the circular economy model ``grow-make-use-restore'' intends to potentiate material and energy flows within a system with the premise of increasing environmental gains. Moreover, circular economy practices can be alternatives for closing loops in companies from different sectors, with material-, waste-, and energy-related initiatives towards promoting greater internal value-adding. However, the lack of consistent tools for measuring circularity of processes and companies is a gap yet to be covered. To tackle this gap, this paper's aims are: (i) to build a new tool, called Circular Flow, for generating greater internal value and competitive advantage in organizations and identify potential circular economy-related opportunities for closing loops based on external flows, (ii) to apply the tool in a case study, an organization that presents material and energy (electricity) flows and exchanges with other organizations, and (iii) to discuss the integration and potential opportunities for the tool in organizations. The novel, Circular Flow, tool is based on a set of circular graph visualizations, and quantitative circularity indicators. For the graphical visualization, the software tool R (using the Circlize package) was used. The graphs aid the visualization of several interconnected pieces of information, allowing to show all quantitative flows of inputs and outputs, intuitively showing the paths (origin and destination of each flow) within the boundaries of the system under study. The quantitative indicators, e.g. Circularity of the organization (Circ p) and Circularity of each process (Circ o), show a circularity index ranging from 0\% to 100\%, which can be assessed at different levels. The criteria to select these indicators are based on quantities of inputs and outputs regarding mass and electricity. The tool has been applied in a case study of a rural property in southern Brazil, which region holds a tradition for milk and pig farming. The use of the tool showed the involvement of the rural property with its neighbors and with an agroindustrial cooperative. Keeping these flows within the system may increase environmental gains by reducing transportation, using renewable sources of energy, reducing costs, and boosting the generation of jobs and income in the region due to new market opportunities and business models.}, - langid = {english}, - keywords = {Agroindustrial cooperative,Circular economy,Closing loop,Indicator,Sustainable agriculture}, - file = {/Users/fabio/Zotero/storage/L45Z6L8I/S0956053X23000016.html} -} - -@article{barrosSmartphoneRepairabilityIndexes, - title = {Smartphone Repairability Indexes in Practice: {{Linking}} Repair Scores to Industrial Design Features}, - shorttitle = {Smartphone Repairability Indexes in Practice}, - author = {Barros, M{\'a}rio and Dimla, Eric}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13398}, - urldate = {2023-05-02}, - abstract = {Policymaking mediates the relationships between manufacturers and consumers, thus defining the boundaries for the philosophies of production set forth by major companies. Research states that policymaking falls short in addressing the waste issues, natural resources consumption, greenhouse gas emissions, and other negative impacts posed by premature obsolescence; only recently have the ``right-to-repair'' guidelines demanded by environmental organizations and communities of citizens been included in policymaking. The introduction of the Index of Repairability in France as information at the point of sale aims to inform consumers and support their decision-making in purchasing more repairable products. In this paper, we consider the two Indexes of Repairability publicly available to consumers\textemdash in the French legislation and iFixit\textemdash and assess their application to smartphones from three manufacturers. The study establishes links between the scores and the industrial design features that promote or hinder repairability, service factors and information for self-repair, authorized repair, and independent repair. Data collection considers the available information for consumers and citizens by using netnography and secondary data from manufacturers, policymakers, and communities of users. Our findings suggest that higher scores that indicate easier repairability are not limited to product architectures that follow design for disassembly guidelines. Smartphones that are difficult to repair can still score high, and thus be perceived as easier to repair, if manufacturers provide high quality and affordable service. This paper discusses the results of the ongoing development of repairability scores for smartphones, thus suggesting paths for future research to improve methods and policies to support a longer lifetime of products.}, - copyright = {\textcopyright{} 2023 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of International Society for Industrial Ecology.}, - langid = {english}, - keywords = {circular economy,Index of Repairability,industrial ecology,policy analysis,product design,smartphones}, - file = {/Users/fabio/Zotero/storage/AQ2WTXBF/Barros_Dimla_Smartphone repairability indexes in practice.pdf;/Users/fabio/Zotero/storage/DPQ5L3EI/jiec.html} -} - -@article{Barth2019, - title = {Fabrication {{Laboratory}} as the Learning Environment for Higher Education}, - author = {Barth, Henrik}, - year = {2019}, - journal = {IMCIC 2019 - 10th International Multi-Conference on Complexity, Informatics and Cybernetics, Proceedings}, - volume = {2}, - number = {Imcic}, - pages = {194--196}, - abstract = {There is a growing trend of using digital production, such as additive manufacturing, in direct consumer markets. Digital production enables new and advanced tools, which provide shorter development time and lower cost for manufacturing. In this paper we focus on the education and learning environment for digital production and prototyping at a fabrication laboratory (FabLab). FabLab (Fabrication Laboratory) is a small-scale innovation space offering digital fabrication and production. A FabLab is, among many things, a platform for learning and exchanging experience when experimenting and developing new solutions. FabLabs bring together students, researchers and teachers as well as industrial partners in a single physical location for the purposes of designing, prototyping, and do-it-yourself manufacturing. This explorative and creative environment provide insights to knowledge creation, based on the constructive learning theory, which address active involvement by the participants. To take full advantage of this creative learning environment, aspects such as student characteristics, the nature of the subject matter, and the teaching carried out by the staff, also needs to be addressed.}, - keywords = {3D printing,Additive manufacturing,Education,FabLab,Learning}, - file = {/Users/fabio/Zotero/storage/7F9RMFTR/Fabrication Laboratory as the learning environment for higher education.pdf} -} - -@article{bartlMovingRecyclingWaste2014, - title = {Moving from Recycling to Waste Prevention: {{A}} Review of Barriers and Enables}, - shorttitle = {Moving from Recycling to Waste Prevention}, - author = {Bartl, Andreas}, - year = {2014}, - month = sep, - journal = {Waste Management \& Research}, - volume = {32}, - number = {9\_suppl}, - pages = {3--18}, - publisher = {{SAGE Publications Ltd STM}}, - issn = {0734-242X}, - doi = {10.1177/0734242X14541986}, - urldate = {2023-08-21}, - abstract = {Current European waste policy does not mainly aim to treat waste streams but rather place in the foreground of interest the complete supply chain of a product. Waste prevention and re-use do have the highest priority and they take effect before the end-of-life phase of a product or a material is reached. Recycling only takes the third place whereas recovery and disposal represent the least favourable options. Recycling can help to decrease the consumption of primary resources but it does not tackle the causes but only the symptoms. In principle, recycling processes require energy and will generate side streams (i.e. waste). Furthermore, there are insuperable barriers and the practice is far from 100\% recycling. The philosophy of waste prevention and re-use is completely different since they really tackle the causes. It is self-evident that a decrease of waste will also decrease the consumption of resources, energy and money to process the waste. However, even if European legislation is proceeding in the right direction, a clear decrease in waste generation did not occur up to now. Unfortunately, waste generation represents a positive factor of economic growth. Basically, waste generation is a huge business and numerous stakeholders are not interested to reduce waste. More sophisticated incentives are required to decouple economic growth from waste generation.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/C8RCWIZR/Bartl_2014_Moving from recycling to waste prevention.pdf} -} - -@article{Bartolo2012, - title = {Biomedical Production of Implants by Additive Electro-Chemical and Physical Processes}, - author = {Bartolo, Paulo and Kruth, Jean Pierre and Silva, Jorge and Levy, Gideon and Malshe, Ajay and Rajurkar, Kamlakar and Mitsuishi, Mamoru and Ciurana, Joaquim and Leu, Ming}, - year = {2012}, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {61}, - number = {2}, - pages = {635--655}, - publisher = {{CIRP}}, - issn = {00078506}, - doi = {10.1016/j.cirp.2012.05.005}, - abstract = {Biomanufacturing integrates life science and engineering fundamentals to produce biocompatible products enhancing the quality of life. The state-of-the-art of this rapidly evolving manufacturing sector is presented and discussed, in particular the additive electrical, chemical and physical processes currently being applied to produce synthetic and biological parts. This fabrication strategy is strongly material-dependent, so the main classes of biomaterials are detailed. It is explained the potential to process composite materials combining synthetic and biological materials, such as cells, proteins and growth factors, as well the interdependences between materials and processes. The techniques commonly used to increase the bioactivity of clinical implants and improve the interface characteristics between biological tissues and implants are also presented. \textcopyright{} 2012 CIRP.}, - isbn = {0007-8506}, - keywords = {Additive manufacturing,Biomedical,Health care} -} - -@article{Barton2018, - title = {({{Dis}}) Integrated Valuation \textendash{} {{Assessing}} the Information Gaps in Ecosystem Service Appraisals for Governance Support}, - author = {Barton, D. N. and Kelemen, E. and Dick, J. and {Martin-Lopez}, B. and {G{\'o}mez-Baggethun}, E. and Jacobs, S. and Hendriks, C. M.A. and Termansen, M. and {Garc{\'i}a-Llorente}, M. and Primmer, E. and Dunford, R. and Harrison, P. A. and Turkelboom, F. and Saarikoski, H. and {van Dijk}, J. and Rusch, G. M. and Palomo, I. and {Yli-Pelkonen}, V. J. and Carvalho, L. and Bar{\'o}, F. and Langemeyer, J. and {van der Wal}, J. Tjalling and Mederly, P. and Priess, J. A. and Luque, S. and Berry, P. and Santos, R. and Odee, D. and Pastur, G. Martines and Garc{\'i}a Blanco, G. and Saarela, S. R. and Silaghi, D. and Pataki, G. and Masi, F. and V{\u a}dineanu, A. and Mukhopadhyay, R. and Lapola, D. M.}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - number = {October 2017}, - pages = {529--541}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.10.021}, - abstract = {The operational challenges of integrated ecosystem service (ES) appraisals are determined by study purpose, system complexity and uncertainty, decision-makers' requirements for reliability and accuracy of methods, and approaches to stakeholder\textendash science interaction in different decision contexts. To explore these factors we defined an information gap hypothesis, based on a theory of cumulative uncertainty in ES appraisals. When decision context requirements for accuracy and reliability increase, and the expected uncertainty of the ES appraisal methods also increases, the likelihood of methods being used is expected to drop, creating a potential information gap in governance. In order to test this information gap hypothesis, we evaluate 26 case studies and 80 ecosystem services appraisals in a large integrated EU research project. We find some support for a decreasing likelihood of ES appraisal methods coinciding with increasing accuracy and reliability requirements of the decision-support context, and with increasing uncertainty. We do not find that information costs are the explanation for this information gap, but rather that the research project interacted mostly with stakeholders outside the most decision-relevant contexts. The paper discusses how alternative definitions of integrated valuation can lead to different interpretations of decision-support information, and different governance approaches to dealing with uncertainty.}, - keywords = {Eccosystem services cascade,Ecosystem service appraisal,Ecosystem service governance,Information costs,Integrated valuation,Uncertainty,Valuation}, - file = {/Users/fabio/Zotero/storage/KUAWAX95/-Dis--integrated-valuation---Assessing-the-information-gaps-i_2018_Ecosystem.pdf} -} - -@incollection{Baruffaldi2019, - title = {Sustainable Operations in Reusable Food Packaging Networks}, - booktitle = {Sustainable {{Food Supply Chains}}}, - author = {Baruffaldi, Giulia and Accorsi, Riccardo and Volpe, Luca and Manzini, Riccardo and Nilsson, Fredrik}, - year = {2019}, - month = jan, - pages = {293--304}, - publisher = {{Elsevier}}, - doi = {10.1016/B978-0-12-813411-5.00020-X}, - urldate = {2020-04-08}, - abstract = {This chapter explores the processes of a typical logistics network for the management of reusable packaging for food products. While the impacts associated with packaging waste in the food sector are well known, the adoption of reusable crates or handling systems for food items entails many logistics processes such as storage, transportation, and cleaning, whose impact needs to be quantified and assessed with cost-benefit analysis. This chapter thus presents a methodology and a decision-support tool used to quantify the logistic and environmental impacts associated with packaging distribution in the closed-loop network between growers, retailers, and the pooler.This methodology allows quantifying of the performance of the as-is scenario and predicting the savings of choosing intermodal transport solutions (i.e., railways, seaways) for the delivery and collection of reusable plastic crates (RPCs) for fruits and vegetables. The methodology is applied to a multiscenario what-if analysis of a case study provided by an Italian pooler operating in the retail food supply chain. The results are generated through a decision-support tool, which embeds a geographic information system (GIS) and realizes data-driven assessment of storage and distribution operations experienced by RPCs. We quantified some categories of impacts among the set of greenhouse gases emissions (GHGs) resulting from transportation and associated costs. The results showcase a total transportation cost reduction of 11.7\% in the to-be scenario, while the number of kilograms of CO2eq decreases by 9.2\%. The contribution of this chapter lies in the investigation of the environmental sustainability of a packaging closed-loop network (CLN) for food products. Moreover, we decided to limit the boundaries of the analysis to the transport process, which is often neglected and underrated in typical life cycle assessment (LCA). Findings from this chapter represent practical suggestions and strategic guidelines for managers and practitioners of reusable package systems toward more sustainable operations.}, - isbn = {978-0-12-813411-5}, - keywords = {Closed-loop network,Intermodal transport,Packaging network,Returnable packaging,Reverse supply chain}, - file = {/Users/fabio/Zotero/storage/M2Q3AZIK/Sustainable operations in reusable food packaging networks.pdf} -} - -@article{Bas2015, - title = {Participatory Foresight for Social Innovation. {{FLUX-3D}} Method ({{Forward Looking User Experience}}), a Tool for Evaluating Innovations}, - author = {Bas, Enric and Guillo, Mario}, - year = {2015}, - month = dec, - volume = {101}, - pages = {275--290}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2015.06.016}, - abstract = {The new socio-technological paradigm based on global access, constant change, immediacy and social networking is forcing organizations to be more empathetic with their stakeholders by adopting a "human centered approach." This change implies a need to look for new more flexible, creative and participatory ways to approach future research.The concept of social innovation becomes highly relevant in this context, since it means understanding innovation as a culture: an essential part of the value code and the collective identity of a society and/or human organization. This concept implies a holistic, creative and democratic way to approach innovation, traditionally associated with science and technology and future thinking.5. FLUX-3D is a tool designed to assess innovative proposals (ideas, products, processes or services) according to users' experience. Thanks to its simplicity, together with the fact that it is systematic and based on tridimensional cube-shaped graphic representations, FLUX-3D provides key information about users' satisfaction - with regard to their expectations - immediately and at first sight, on three different levels of analysis (dimensions, indicators, variables), and in a very accessible as well as intuitive way. It can additionally provide real time feedback which is helpful both for short-, medium- and long-term decision-making because of its participatory and open nature.}, - keywords = {Change management,Design thinking,Innovation culture,Participatory foresight,Users' experience} -} - -@article{basgulHeatTransferBasedNonisothermal2021, - title = {Heat {{Transfer-Based Non-isothermal Healing Model}} for the {{Interfacial Bonding Strength}} of {{Fused Filament Fabricated Polyetheretherketone}}}, - author = {Basgul, Cemile and Thieringer, Florian M. and Kurtz, Steven M.}, - year = {2021}, - month = jun, - journal = {Additive Manufacturing}, - pages = {102097}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102097}, - urldate = {2021-06-11} -} - -@article{bashaStateArtChemical2022, - title = {State of the Art on Chemical and Electrochemical Based Finishing Processes for Additive Manufactured Features}, - author = {Basha, M. M. and Basha, S. M. and Jain, V. K. and Sankar, M. R.}, - year = {2022}, - month = oct, - journal = {Additive Manufacturing}, - volume = {58}, - pages = {103028}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2022.103028}, - urldate = {2022-08-11}, - abstract = {Additive manufacturing is an emerging technique for manufacturing complex shapes rather than traditional manufacturing procedures due to the tool free manufacturing method. The complex components manufactured by this technique have a high surface roughness, which reduces fatigue strength, influences the wear of mating components, reduces the cooling efficiency of complex cooling channels, and so on. The surface roughness of complex cooling channels, for example, affects the formation of boundary layers, partial liquid flow, and heat transfer coefficients. As a result, the finishing processes are required for additively manufactured components to reduce the surface roughness. Chemical based finishing processes for additively manufactured parts have been developed by the researchers because it is a noncontact and automatic finishing process. However, a lack of understanding of the fundamental mechanisms governing these finishing processes may limit their practical uses in areas like aerospace, automobiles, and defense. In this review study, the mechanisms of various chemical and electrochemical based finishing processes are explained first, followed by the current state of the finishing processes of additively manufactured components. Surface integrity, for example, is controlled by experimental factors that are revealed first, followed by various researchers choosing acceptable input parameters to achieve the low surface roughness. In addition, this article provides future perspectives on finishing processes and a view into the process selection based on the component complexity and cost.}, - langid = {english}, - keywords = {Additive manufacturing,Electrolyte,Erosion,Material removal,Surface roughness}, - file = {/Users/fabio/Zotero/storage/RMTVDXTN/Basha et al_2022_State of the art on chemical and electrochemical based finishing processes for.pdf;/Users/fabio/Zotero/storage/UZG5UIWB/S2214860422004201.html} -} - -@article{bashirgonbadiQualityEvaluationEconomic2022, - title = {Quality Evaluation and Economic Assessment of an Improved Mechanical Recycling Process for Post-Consumer Flexible Plastics}, - author = {Bashirgonbadi, Amir and Saputra Lase, Irdanto and Delva, Laurens and Van Geem, Kevin M. and De Meester, Steven and Ragaert, Kim}, - year = {2022}, - month = nov, - journal = {Waste Management}, - volume = {153}, - pages = {41--51}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.08.018}, - urldate = {2022-09-01}, - abstract = {Packaging represents the largest fraction of plastic waste in Europe. Currently, mechanical recycling schemes are mainly focused on the recovery of rigid packaging (like bottles), while for flexible packaging, also called films, recycling rates remain very low. Existing mechanical recycling technologies for these films are quite basic, especially in the case of complicated post-consumer flexible plastics (PCFP) waste, leading to regranulate qualities that are often subpar for renewed use in demanding film applications. In this study, the technical and economic value of an improved mechanical recycling process (additional sorting, hot washing, and improved extrusion) of PCFPs is investigated. The quality of the four types of resulting regranulates is evaluated for film and injection molding applications. The obtained Polyethylene-rich regranulates in blown films offer more flexibility (45\textendash 60\%), higher ductility (27\textendash 55\%), and enhanced tensile strength (5\textendash 51\%), compared to the conventional mechanical recycling process. Likewise, for injection molded samples, they exhibit more flexibility (19\textendash 49\%), enhanced ductility (7 to 20 times), and higher impact strength (1.8 to 3.8 times). An economic assessment is made between the obtained increased market value and the capital investment required. It is shown that the economic value can be increased by 5\textendash 38\% through this improved recycling process. Overall, the study shows that it is possible to increase the mechanical recycling quality of PCFP in an economically viable way, thus opening the way for new application routes and overall increased recycling rates.}, - langid = {english}, - keywords = {Economic value,Mechanical recycling,Plastics recycling,Post-consumer flexible plastics,Technical quality}, - file = {/Users/fabio/Zotero/storage/XX7Z7DWS/S0956053X22004275.html} -} - -@article{Bassett2015, - title = {{{3D}} Printed Wind Turbines Part 1: {{Design}} Considerations and Rapid Manufacture Potential}, - author = {Bassett, K. and Carriveau, R. and Ting, S.-K.D.}, - year = {2015}, - month = feb, - journal = {Sustainable Energy Technologies and Assessments}, - publisher = {{Elsevier Ltd}}, - issn = {22131388}, - doi = {10.1016/j.seta.2015.01.002}, - urldate = {2015-03-09}, - abstract = {Recent advances in additive manufacturing (AM) and Fused Material Deposition (FMD) techniques have resulted in the commercialization and popularization of what is commonly known as 3D printing. Small wind turbine technology stands to benefit greatly from this technology when considering turbines intended for disaster relief and rural electrification. With the appropriate design, wind turbines could be rapidly manufactured (printed) and assembled on-site at an as needed basis without additional tooling beyond a 3D printing machine and printing filament. This paper examines the design considerations of such a wind turbine including material properties, reinforcement techniques, integration of non-printed components, printed component design and print optimization. A rapid manufacture-able design is pre- sented of vertical axis configuration. Conclusions are drawn as to the viability and practicality of 3D printed wind turbines and opportunities for future work are identifie}, - keywords = {3D printing,Rapd manufacture,RepRap,VAWT,Wind Turbine}, - file = {/Users/fabio/Zotero/storage/2BZA5323/Bassett, Carriveau, Ting - 2015 - 3D printed wind turbines part 1 Design considerations and rapid manufacture potential.pdf} -} - -@article{Bassi2020, - title = {Improving the Understanding of {{Circular Economy}} Potential at Territorial Level Using {{Systems Thinking}}}, - author = {Bassi, Dr. Andrea Maria and Bianchi, Dr. Marco and Guzzetti, Mr. Marco and Pallaske, Mr. Georg and Tapia, Dr. Carlos}, - year = {2020}, - month = oct, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.10.028}, - urldate = {2020-10-30}, - abstract = {This is a PDF file of an article that has undergone enhancements after acceptance, such as the addition of a cover page and metadata, and formatting for readability, but it is not yet the definitive version of record. This version will undergo additional copyediting, typesetting and review before it is published in its final form, but we are providing this version to give early visibility of the article. Please note that, during the production process, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.}, - file = {/Users/fabio/Zotero/storage/PFCGTCTA/Bassi et al. - 2020 - Journal Pre-proof Improving the understanding of Circular Economy potential at territorial level using Systems Thi.pdf} -} - -@article{Bassoli2012, - title = {A Combined Additive Layer Manufacturing / Indirect Replication Method to Prototype {{3D}} Vascular-like Structures of Soft Tissue and Endocrine Organs}, - author = {Bassoli, E. and Denti, L. and Gatto, A. and Spaletta, G. and Paderno, A. and Zini, N. and Parrilli, A. and Giardino, R. and Strusi, V. and Dallatana, D. and Mastrogiacomo, S. and Zamparelli, A. and Iafisco, M. and Toni, R.}, - year = {2012}, - month = mar, - journal = {Virtual and Physical Prototyping}, - volume = {7}, - number = {1}, - pages = {3--11}, - issn = {1745-2759}, - doi = {10.1080/17452759.2012.668701}, - urldate = {2014-02-02}, - file = {/Users/fabio/Zotero/storage/YVZETQMN/Bassoli et al. - 2012 - A combined additive layer manufacturing indirect replication method to prototype 3D vascular-like structures of.pdf} -} - -@article{Bastian2012, - title = {Ecosystem Properties, Potentials and Services \textendash{} {{The EPPS}} Conceptual Framework and an Urban Application Example}, - author = {Bastian, Olaf and Haase, Dagmar and Grunewald, Karsten}, - year = {2012}, - month = oct, - journal = {Ecological Indicators}, - volume = {21}, - pages = {7--16}, - publisher = {{Elsevier}}, - issn = {1470160X}, - doi = {10.1016/j.ecolind.2011.03.014}, - urldate = {2021-06-28}, - keywords = {Carbon sequestration,Ecosystem functions,Ecosystem services,Landscape planning,Recreation,Urban green spaces}, - file = {/Users/fabio/Zotero/storage/NQC38GAX/Bastian, Haase, Grunewald - 2012 - Ecosystem properties, potentials and services-The EPPS conceptual framework and an urban application.pdf} -} - -@article{Basuhi2021, - title = {Environmental and Economic Implications of {{U}}.{{S}}. Postconsumer Plastic Waste Management}, - author = {Basuhi, R. and Moore, Elizabeth and Gregory, Jeremy and Kirchain, Randolph and Gesing, Adam and Olivetti, Elsa A.}, - year = {2021}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {167}, - pages = {105391}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105391}, - urldate = {2021-02-14}, - file = {/Users/fabio/Zotero/storage/Z7IRM29B/Basuhi et al. - 2021 - Environmental and economic implications of U.S. postconsumer plastic waste management.pdf} -} - -@article{batistaFrameworkSustainableIntegrated2021, - title = {A Framework for Sustainable and Integrated Municipal Solid Waste Management: {{Barriers}} and Critical Factors to Developing Countries}, - author = {Batista, Marcio and Goyannes Gusm{\~a}o Caiado, Rodrigo and Gon{\c c}alves Quelhas, Osvaldo Luiz and Brito Alves Lima, Gilson and Leal Filho, Walter and Rocha Yparraguirre, Ivany Terezinha}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {312}, - pages = {127516}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127516}, - urldate = {2021-06-10} -} - -@book{batraElementsContinuumMechanics2006, - title = {Elements of Continuum Mechanics}, - author = {Batra, R. C.}, - year = {2006}, - series = {Education Series}, - publisher = {{American Institute of Aeronautics and Astronautics}}, - address = {{Reston, VA}}, - isbn = {978-1-56347-699-0}, - langid = {english}, - lccn = {QA808.2 .B366 2006}, - keywords = {Continuum mechanics}, - file = {/Users/fabio/Zotero/storage/ZQZXSLFT/Batra - 2006 - Elements of continuum mechanics.pdf} -} - -@article{Battaglia2019, - title = {Future Perspectives of Sustainable Development: {{An}} Innovative Planning Approach to Inner Areas. {{Experience}} of an {{Italian}} Alpine Region}, - author = {Battaglia, Massimo and Annesi, Nora and Pierantoni, Ilenia and Sargolini, Massimo}, - year = {2019}, - month = dec, - journal = {Futures}, - volume = {114}, - pages = {102468}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.102468} -} - -@article{battegazzoreDevelopmentDisposableFiltering2022, - title = {Development of Disposable Filtering Mask Recycled Materials: {{Impact}} of Blending with Recycled Mixed Polyolefin and Their Aging Stability}, - author = {Battegazzore, Daniele and Cravero, Fulvia and Frache, Alberto}, - year = {2022}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {177}, - pages = {105974}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105974}, - urldate = {2021-11-07}, - abstract = {A survey on Covid-19 protecting masks habits carried out on the Italian population at the end of 2020 revealed that disposable face masks are the most used, thus resulting in a considerable quantity of waste. Therefore, a separate collection of these devices based on local platforms such as schools, offices and factories is proposed. This would limit collecting costs, ensure the origin and quantity and simplify the sanitizing treatment of the masks, in order to allow their introduction into the industrial recycling stream of plastic materials. In this scenario, an urban separate waste collection material (namely mixed polyolefin) was selected and melt blended in several ratios with the disposable filtering masks. Two recycling solutions have been envisaged: the use of the filtering part alone or the joint introduction of the ear loops. Compared to the mixed polyolefin, the resulting recycled materials from filtering face masks have lower viscosity but comparable toughness and superior stiffness and strength. The presence of ear loops in the recycled improves the rigidity but slightly decrease the viscosity and worsen both the strength and toughness. Furthermore, conceiving an outdoor application, the stability to photo oxidation was investigated through an accelerated aging process. The elaborated degradation rate of the masks material is similar to a commercial polypropylene, while for the mixed polyolefin is greatly reduced. The mixed compounds have intermediate degradation rates.}, - keywords = {Face mask,Mechanical properties,Mechanical recycling,Photo degradation,Recycled mixed polyolefin,Waste} -} - -@article{baulazIntegratedConceptualModel2023, - title = {An Integrated Conceptual Model to Characterize the Effects of Offshore Wind Farms on Ecosystem Services}, - author = {Baulaz, Yoann and Mouchet, Maud and Niquil, Nathalie and Ben Rais Lasram, Frida}, - year = {2023}, - month = apr, - journal = {Ecosystem Services}, - volume = {60}, - pages = {101513}, - issn = {2212-0416}, - doi = {10.1016/j.ecoser.2023.101513}, - urldate = {2023-02-12}, - abstract = {Offshore wind farm development has become a key measure of energy transition in recent years. Coastal territories are particularly favorable to the development of offshore wind farms due to their high energy potential. However, these areas are also hotspots of biodiversity, provide attractive landscapes and are under strong anthropogenic pressures. Preserving and sharing the natural and cultural resources of coastal territories while intensifying renewable marine energies, represents one of the most important challenges for future management of coastal environments. Consequently, systemic models that consider all the effects of offshore wind farms on ecosystems and society are essential. Here, we propose a conceptual model for studying these effects, by mobilizing the concept of ecosystem service in a systemic and integrated assessment approach. To that aim, we reviewed the literature and compiled experts' knowledge in order to characterize the effects of offshore wind farms on food webs during the construction and operation phases. Then, we analyzed the contribution of trophic compartments on ecosystem functions, ecosystem services and beneficiaries, and how offshore wind farms modify the relationships between these compartments of the marine coastal social-ecological systems. Our approach helps identify the causal chains that generate the most important modifications in this system. This information could then be used to predict impacts of offshore wind farms on ecosystem services, and to suggest management trade-offs. This study reveals the need for further studies relating marine biodiversity to ecosystem services, and developing systemic approaches at different scales. The analysis of the effects of offshore wind farms on ecosystem services is crucial since it is linked to strong ecological, socio-economic and political issues.}, - langid = {english}, - keywords = {Conceptual framework,Ecosystem service,Integrated assessment,Offshore wind farm,Resource management}, - file = {/Users/fabio/Zotero/storage/75K2IH7M/Baulaz et al_2023_An integrated conceptual model to characterize the effects of offshore wind.pdf;/Users/fabio/Zotero/storage/H6L5LZTS/S2212041623000050.html} -} - -@article{Baumann2016, - title = {Vision Based Error Detection for {{3D}} Printing Processes}, - author = {Baumann, Felix and Roller, Dieter}, - editor = {Abdul Amir, H.F. and Korsunsky, A.M. and Guo, Z.}, - year = {2016}, - month = may, - journal = {MATEC Web of Conferences}, - volume = {59}, - pages = {06003}, - issn = {2261-236X}, - doi = {10.1051/matecconf/20165906003} -} - -@article{Baumeister1997, - title = {Writing Narrative Literature Reviews}, - author = {Baumeister, Roy F. and Leary, Mark R.}, - year = {1997}, - journal = {Review of General Psychology}, - volume = {1}, - number = {3}, - pages = {311--320}, - issn = {10892680}, - doi = {10.1037/1089-2680.1.3.311}, - abstract = {Narrative literature reviews serve a vital scientific function, but few resources help people learn to write them. As compared with empirical reports, literature reviews can tackle broader and more abstract questions, can engage in more post hoc theorizing without the danger of capitalizing on chance, can make a stronger case for a null-hypothesis conclusion, and can appreciate and use methodological diversity better. Also, literature reviews can draw any of 4 conclusions: The hypothesis is correct, it has not been conclusively established but is the currently best guess, it is false, or the evidence permits no conclusion. Common mistakes of authors of literature review manuscripts are described.}, - file = {/Users/fabio/Zotero/storage/5CBVYW6P/Writing narrative literature reviews.pdf} -} - -@book{Baumeister2013, - title = {The {{Portable Mentor}}}, - author = {Baumeister, Roy F}, - editor = {Prinstein, Mitchell J.}, - year = {2013}, - journal = {The Portable Mentor}, - publisher = {{Springer New York}}, - address = {{New York, NY}}, - doi = {10.1007/978-1-4614-3994-3}, - abstract = {Ultrafiltration looks set to corner the market with drinking water filtration. In this article, inge AG give us an overview of the technology and its different applications. Could ultrafiltration be a sustainable solution for drinking water needs?}, - isbn = {978-1-4614-3993-6}, - file = {/Users/fabio/Zotero/storage/5KLCLMCX/The Portable Mentor.pdf} -} - -@article{Baumers2011, - title = {Sustainability of Additive Manufacturing: Measuring the Energy Consumption of the Laser Sintering Process}, - author = {Baumers, M. and Tuck, C. and Bourell, D. L. and Sreenivasan, R. and Hague, R.}, - year = {2011}, - month = dec, - journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, - volume = {225}, - number = {12}, - pages = {2228--2239}, - issn = {0954-4054}, - doi = {10.1177/0954405411406044}, - abstract = {The term additive manufacturing (AM) describes a collection of production techniques enabling the layer-by-layer manufacture of components using digital data and raw material as inputs. The AM technology variant most frequently used in the production of end use parts is laser sintering (LS). It has been suggested that efficient usage of the energy inputs is one of the advantages of the technology. This paper presents a comparative assessment of the electricity consumptions of two major polymeric LS platforms: the Sinterstation HiQ + HS from 3D Systems and the EOSINT P 390 from EOS GmbH. The energy inputs to a build consisting of two prosthetic parts were recorded during power-monitoring experiments conducted on both platforms. This paper injects clarity into the ongoing research on the AM energy consumption by applying a novel classification system; it is argued that the AM energy usage can be divided into the job-dependent, time-dependent, geometry-dependent, and Z-height-dependent energy consumption values. The recorded mean real power consumption conforms to the values that have been reported for similar platforms. The measured energy consumption rates are higher than reported elsewhere. It is also shown that the purely time-dependent energy consumption is the main energy drain. Furthermore, the presentation of results in the context of previous literature highlights the caveats attached to summary metrics of the AM input usage.}, - isbn = {0954-4054}, - keywords = {additive manufacturing,electricity,energy,energy consumption,laser sintering,power,power monitoring,rapid manufacturing}, - file = {/Users/fabio/Zotero/storage/SQNKWBND/Baumers et al. - 2011 - Sustainability of additive manufacturing measuring the energy consumption of the laser sintering process.pdf} -} - -@article{Baumers2016, - title = {The Cost of Additive Manufacturing: Machine Productivity, Economies of Scale and Technology-Push}, - author = {Baumers, Martin and Dickens, Phill and Tuck, Chris and Hague, Richard}, - year = {2016}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {102}, - pages = {193--201}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2015.02.015}, - abstract = {As part of the cosmos of digital fabrication technology, Additive Manufacturing (AM) systems are able to manufacture three-dimensional components and products directly from raw material and 3D design data. The layer-by-layer operating process of these systems does not require the use of tools, moulds or dies. Technology observers speculate that AM will have a profound economic impact on the manufacturing sector and indeed on wider society. By constructing a model of production cost for two different AM systems used commercially for the manufacture of end-use metal parts, Electron Beam Melting (EBM) and Direct Metal Laser Sintering (DMLS), this paper performs an inter-process comparison of cost performance. High specific costs, measured at ??2.39 and ??6.18 per cm3 of material deposited respectively, are identified as a central impediment to more widespread technology adoption of such additive systems. The research demonstrates differing levels of system productivity, suggesting that the observed deposition rates are not sufficient for the adoption of EBM and DMLS in high volume manufacturing applications. Despite the absence of amortisable tooling costs, the analysis also reveals that economies of scale are achievable in AM. The results reached are further discussed in the light of the varying strategic requirements posed by the market-pull and technology-push modes of innovation which are both found in the AM industry.}, - isbn = {0040-1625}, - keywords = {3D printing,Additive manufacturing,Digital fabrication,Economies of scale,Production cost,Productivity,Rapid manufacturing,Rapid prototyping}, - file = {/Users/fabio/Zotero/storage/R52S59MY/The cost of additive manufacturing machine productivity, economies of scale and technology-push.pdf} -} - -@article{baumgartnerSufficiencyRegret2022, - title = {Sufficiency without Regret}, - author = {Baumgartner, Anne and Krysiak, Frank C. and Kuhlmey, Florian}, - year = {2022}, - month = oct, - journal = {Ecological Economics}, - volume = {200}, - pages = {107545}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2022.107545}, - urldate = {2022-08-11}, - abstract = {The notion of sufficiency has gained considerable traction in many social sciences as well as in environmental and energy policy. However, sufficiency is not widely discussed in economics, most likely because it is seen as being hard to identify or uninteresting in the context of the standard model of rational choice. In this paper, we introduce a concept of sufficiency, which we define as a change of lifestyle that reduces environmental externalities without compromising individual well-being. We advance a framework of individual choice, where individuals select lifestyles and face uncertainty regarding their preferences in hitherto not experienced lifestyles. We show that changes towards sufficiency are feasible in this setting but, although they can be beneficial to the individual, they might require policy support.}, - langid = {english}, - keywords = {Efficiency,Lifestyle changes,Rational choice,Sufficiency,Uncertainty}, - file = {/Users/fabio/Zotero/storage/D47XSUQW/Baumgartner et al_2022_Sufficiency without regret.pdf} -} - -@article{bautista-puigSustainabilityPracticesSpanish2021, - title = {Sustainability Practices in {{Spanish}} Higher Education Institutions: {{An}} Overview of Status and Implementation}, - author = {{Bautista-Puig}, N{\'u}ria and {Sanz-Casado}, El{\'i}as}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {295}, - pages = {126320}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126320}, - urldate = {2021-02-28}, - file = {/Users/fabio/Zotero/storage/H586P4G8/full-text.pdf} -} - -@article{Bautista2016, - title = {Biodiesel-{{TBL}}+: {{A}} New Hierarchical Sustainability Assessment Framework of {{PC}}\&{{I}} for Biodiesel Production - {{Part}} i}, - author = {Bautista, S. and Narvaez, P. and Camargo, M. and Chery, O. and Morel, L.}, - year = {2016}, - journal = {Ecological Indicators}, - volume = {60}, - pages = {84--107}, - publisher = {{Elsevier Ltd}}, - issn = {1470160X}, - doi = {10.1016/j.ecolind.2015.06.020}, - abstract = {Sustainability assessment of biodiesel production is a topic of increasing importance due to the interest of governments to define sovereignty strategies and diversification of their energy matrix, and to set up the impact of biofuels production. In this context, this work aims to propose a hierarchical structure of sustainability assessment that integrates dimensions of sustainable development with principles, criteria and indicators (PC\&I). The method employed to define the hierarchical structure was a comprehensive literature review, based on information search strategy and classification. About 400 documents were reviewed and 103 documents were ultimately selected, including laws, policy documents, certificates, directives and other normative documents and papers published in peer-reviewed journals. The first result of the analysis was the need to strengthen identification of the sustainable development assessment, adding the political and technological dimensions to the three traditional dimensions, social, economic and environmental, studied in this kind of evaluation. The second result was the proposal of a hierarchical framework for the sustainability assessment of biodiesel production, organized in four levels: The first level comprises the five dimensions associated with sustainable development evaluation, the second includes 13 principles, the third contains 40 criteria and the fourth level corresponds to a set of indicators that describes each criterion. Outcomes of this work provide a foundation for further discussion of sustainability assessments for biodiesel production and its potential application in specific contexts.}, - keywords = {Biodiesel,Framework,Principles and criteria,Sustainability}, - file = {/Users/fabio/Zotero/storage/GXE2A77B/Biodiesel-TBL A new hierarchical sustainability assessment framework of PC&I for biodiesel production - Part i.pdf} -} - -@article{Bauwens2014, - title = {From the Communism of Capital to Capital for the Commons: {{Towards}} an Open Co-Operativism}, - author = {Bauwens, Michel and Kostakis, Vasilis}, - year = {2014}, - month = apr, - journal = {tripleC Commun. Capital. Crit. Open Access J. a Glob. Sustain. Inf. Soc.}, - volume = {12}, - number = {1}, - pages = {356--361}, - issn = {1726-670X}, - doi = {10.31269/vol12iss1pp356-361}, - abstract = {Two prominent social progressive movements are faced with a few contradictions and a paradox. On the one side, we have a re-emergence of the co-operative movement and worker-owned enterprises which suffer from certain structural weaknesses. On the other, we have an emergent field of open and Commons-oriented peer production initiatives which create common pools of knowledge for the whole of humanity, but are dominated by start-ups and large multinational enterprises using the same Commons. Thus we have a paradox: the more communist the sharing license used in the peer production of free software or open hardware, the more capitalist the practice. To tackle this paradox and the aforementioned contradictions, we tentatively suggest a new convergence that would combine both Commons-oriented open peer production models with common ownership and governance models, such as those of the co-operatives and the solidarity economic models.} -} - -@article{bauwensAreCircularEconomy2021, - title = {Are the Circular Economy and Economic Growth Compatible? {{A}} Case for Post-Growth Circularity}, - author = {Bauwens, Thomas}, - year = {2021}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {175}, - pages = {105852}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105852}, - urldate = {2021-08-24}, - file = {/Users/fabio/Zotero/storage/6DNKXW3L/full-text.pdf} -} - -@article{Baxter2020, - title = {The Roles of Motivation and Goals on Sustainable Behaviour in a Resource Dilemma: {{A}} Self-Determination Theory Perspective}, - author = {Baxter, Daniel and Pelletier, Luc G.}, - year = {2020}, - month = jun, - journal = {Journal of Environmental Psychology}, - volume = {69}, - pages = {101437}, - publisher = {{Academic Press}}, - issn = {15229610}, - doi = {10.1016/j.jenvp.2020.101437}, - urldate = {2020-05-23}, - abstract = {Environmental degradation and biodiversity loss are worldwide problems caused by human activities, which can often be classified as a resource dilemma. Across two studies, and using self-determination theory as a framework, we examine the relationships between motivation, goals, sanctioning systems and sustainable behaviour in a resource dilemma. The resource dilemma used was a 2-person partnered design where each participant was required to make decisions about recreational fishing harvests in a small, private lake with a simulated partner. Study 1 used mediational analysis to demonstrate that quality of motivation affects goal content, and goal content predicts sustainable behaviour. Study 2 introduced a centralized sanctioning system to the resource dilemma, and found that this type of sanctioning system increased sustainable behaviour in the resource dilemma when added, and decreased sustainable behaviour when removed, concomitantly affecting the quality of participant motivation and goal content. The results expand upon self-determination theory, and point to the importance of distinguishing motivation from goals, examining quality of motivation through degree of internalization, and how these constructs as well as sustainable behaviour can be affected by a centralized sanction system.} -} - -@techreport{Bayless2010, - title = {Wire {{Embedding 3D Printer}}}, - author = {Bayless, Jacob and Chen, Mo and Dai, Bing}, - year = {2010}, - institution = {{University of British Columbia}}, - file = {/Users/fabio/Zotero/storage/H9WQCCK9/m-api-76e8f71d-a906-639f-1dc5-925f490b75e5.pdf} -} - -@article{bayulkenHowAreNature2020, - title = {How Are {{Nature Based Solutions Helping}} in the {{Greening}} of {{Cities}} in the {{Context}} of {{Crises}} Such as {{Climate Change}} and {{Pandemics}}? {{A Comprehensive Review}}}, - author = {Bayulken, Bogachan and Huisingh, Donald and Fisher, {\relax Peter.M.J}.}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125569}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125569}, - urldate = {2020-12-24} -} - -@article{Bayuo2020, - title = {Unpacking the Role of Universities in the Emergence, Development and Impact of Social Innovations \textendash{} {{A}} Systematic Review of the Literature}, - author = {Bayuo, Blaise Booponoyeng and Chaminade, Cristina and G{\"o}ransson, Bo}, - year = {2020}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {155}, - pages = {120030}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120030}, - urldate = {2020-04-22}, - abstract = {Widening income and knowledge inqualities have led to growing expectations for universities to integrate social innovation in their core missions as a response to societal problems.This systematic review of literatureprovides an overview of the state-of-the-art of knowledge on the role of the university in enabling social innovation through its missions of teaching, research and third mission. It also identifies knowledge gaps in the field. A bibliometric approachwas usedto identify and analyze books, journal articles and reports examining factors drivingsocial innovation activities at universities, organizational and insitutional change to accommodate such activities as well as their impact.The review revealsthatthe literature on university engagementin socially-oriented activities as part of the third mission of the university is conceptually well developed and a growing field of inquiry. It alsopoints togaps in the knowledge base; relatively few studiesaddressissues related to institutional change and incentive structures that influences the abilityof universities to engage in social innovation. Likewise, impact studies on social innovation activities at universities are scarce.Further research that builds an impact measurement framework wouldsupport the process of integrating social innovation activitiesin the three missions of the university.}, - keywords = {co-production,developmental university,social innovation,sustainable development,third mission,University} -} - -@book{Beaman1996, - title = {Solid {{Freeform Fabrication}}: {{A New Direction}} in {{Manufacturing}}: With {{Research}} and {{Applications}} in {{Thermal Laser Processing}}}, - author = {Beaman, J.J. and Barlow, John W. and Bourell, D.L. and Crawford, R.H. and Marcus, H.L. and McAlea, K.P.}, - year = {1996}, - publisher = {{Springer}}, - urldate = {2014-01-31}, - isbn = {0-7923-9834-3} -} - -@article{beaudouin-lafonChapter52Prototyping, - title = {Chapter 52 {{Prototyping Tools}} and {{Techniques}}}, - author = {{Beaudouin-Lafon}, Michel and {Paris-Sud}, Universit{\'e} and Mackay, Wendy E}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/GDHXZPRR/Beaudouin-Lafon et al. - Chapter 52 Prototyping Tools and Techniques.pdf} -} - -@inproceedings{Becker2020, - title = {Real-{{Time In-Situ Process Error Detection}} in {{Additive Manufacturing}}}, - booktitle = {2020 {{Fourth IEEE International Conference}} on {{Robotic Computing}} ({{IRC}})}, - author = {Becker, P. and Spielbauer, N. and Roennau, A. and Dillmann, R.}, - year = {2020}, - month = nov, - pages = {426--427}, - publisher = {{IEEE}}, - doi = {10.1109/IRC.2020.00077}, - isbn = {978-1-72815-237-0} -} - -@article{beckerCarbonNeutralityPrinciple2020, - title = {The Carbon Neutrality Principle: {{A}} Case Study in the {{French}} Spirits Sector}, - author = {Becker, Sylvain and {Bouzdine-Chameeva}, Tatiana and Jaegler, Anicia}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - pages = {122739}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122739}, - urldate = {2020-07-13}, - file = {/Users/fabio/Zotero/storage/TLSGV4GA/full-text.pdf} -} - -@article{beckerEthicalUnderpinningsEconomy2023, - title = {Ethical Underpinnings for the Economy of the {{Anthropocene}}: {{Sustainability}} Ethics as Key to a Sustainable Economy}, - shorttitle = {Ethical Underpinnings for the Economy of the {{Anthropocene}}}, - author = {Becker, Christian U.}, - year = {2023}, - month = sep, - journal = {Ecological Economics}, - volume = {211}, - pages = {107868}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107868}, - urldate = {2023-05-11}, - abstract = {This conceptual paper emphasizes the need for considering ethical aspects in developing a sustainable economy that meets the challenges of the historic overuse of the planet in the Anthropocene. The paper argues that a sustainable economy is, at its core, an ethical challenge and requires a new ethical underpinning which considers the ethical dimension of sustainability and insights from sustainability ethics. The tradition of Western economic thought, and specifically the modern conception of the capitalist market economy, are based on rather narrow ethical foundations which are not sufficient to support a sustainable economy. Traditional economic conceptions have mostly focused on the wellbeing of current individuals and societies. There have been no broader systematic economic conceptions that fully integrate the wellbeing of nature, other species, and future beings. A sustainable economy requires a significantly expanded and redefined ethical underpinning that integrates two aspects: First, a broader ethical foundation that systematically considers nature, non-human beings, future beings, and people around the world. Second, a re-definition of individual wellbeing and societal welfare beyond rational utility maximization, efficiency, and growth.}, - langid = {english}, - keywords = {Anthropocene,Ethics,Philosophy of economics,Sustainability ethics,Sustainable economy}, - file = {/Users/fabio/Zotero/storage/ZKVXMTML/Becker - 2023 - Ethical underpinnings for the economy of the Anthr.pdf;/Users/fabio/Zotero/storage/6KF8F7MW/S0921800923001313.html} -} - -@article{beckerRoleDigitalArtefacts2021, - title = {The Role of Digital Artefacts in Early Stages of Distributed Innovation Processes}, - author = {Becker, Markus C. and Rullani, Francesco and Zirpoli, Francesco}, - year = {2021}, - month = dec, - journal = {Research Policy}, - volume = {50}, - number = {10}, - pages = {104349}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104349}, - urldate = {2021-09-15} -} - -@article{beckOpenInnovationScience2020, - title = {The {{Open Innovation}} in {{Science}} Research Field: A Collaborative Conceptualisation Approach}, - author = {Beck, Susanne and Bergenholtz, Carsten and Bogers, Marcel and Brasseur, Tiare Maria and Conradsen, Marie Louise and Di Marco, Diletta and Distel, Andreas P. and Dobusch, Leonhard and D{\"o}rler, Daniel and Effert, Agnes and Fecher, Benedikt and Filiou, Despoina and Frederiksen, Lars and Gillier, Thomas and Grimpe, Christoph and Gruber, Marc and Haeussler, Carolin and Heigl, Florian and Hoisl, Karin and Hyslop, Katie and Kokshagina, Olga and LaFlamme, Marcel and Lawson, Cornelia and {Lifshitz-Assaf}, Hila and Lukas, Wolfgang and Nordberg, Markus and Norn, Maria Theresa and Poetz, Marion and Ponti, Marisa and Pruschak, Gernot and Pujol Priego, Laia and Radziwon, Agnieszka and Rafner, Janet and Romanova, Gergana and Ruser, Alexander and Sauermann, Henry and Shah, Sonali K. and Sherson, Jacob F. and {Suess-Reyes}, Julia and Tucci, Christopher L. and Tuertscher, Philipp and Vedel, Jane Bj{\o}rn and Velden, Theresa and Verganti, Roberto and Wareham, Jonathan and Wiggins, Andrea and Xu, Sunny Mosangzi}, - year = {2020}, - journal = {Industry and Innovation}, - publisher = {{Routledge}}, - issn = {14698390}, - doi = {10.1080/13662716.2020.1792274}, - urldate = {2021-04-29}, - abstract = {Openness and collaboration in scientific research are attracting increasing attention from scholars and practitioners alike. However, a common understanding of these phenomena is hindered by disciplinary boundaries and disconnected research streams. We link dispersed knowledge on Open Innovation, Open Science, and related concepts such as Responsible Research and Innovation by proposing a unifying Open Innovation in Science (OIS) Research Framework. This framework captures the antecedents, contingencies, and consequences of open and collaborative practices along the entire process of generating and disseminating scientific insights and translating them into innovation. Moreover, it elucidates individual-, team-, organisation-, field-, and society-level factors shaping OIS practices. To conceptualise the framework, we employed a collaborative approach involving 47 scholars from multiple disciplines, highlighting both tensions and commonalities between existing approaches. The OIS Research Framework thus serves as a basis for future research, informs policy discussions, and provides guidance to scientists and practitioners.}, - keywords = {collaboration in science,interdisciplinary research,Open Innovation in Science,Open Science,openness}, - file = {/Users/fabio/Zotero/storage/XYZQTR8E/full-text.pdf} -} - -@book{beerMechanicsMaterials2020, - title = {Mechanics of Materials}, - author = {Beer, Ferdinand P.}, - year = {2020}, - edition = {Eighth edition}, - publisher = {{McGraw-Hill Education}}, - address = {{New York, NY}}, - isbn = {978-1-260-11327-3}, - langid = {english}, - lccn = {TA405 .B39 2020}, - keywords = {Strength of materials,Textbooks}, - file = {/Users/fabio/Zotero/storage/CCG74UJ5/Beer - 2020 - Mechanics of materials.pdf} -} - -@book{beerVectorMechanicsEngineers2016, - title = {{Vector mechanics for engineers. Dynamics}}, - author = {Beer, Ferdinand P. and Johnston, E. Russell and Mazurek, David F.}, - year = {2016}, - edition = {Eleventh edition}, - publisher = {{McGraw-Hill Education}}, - address = {{New York, NY}}, - isbn = {978-0-07-768734-2}, - langid = {french}, - lccn = {TA350 .B35523 2016}, - keywords = {Dynamics,Statics}, - file = {/Users/fabio/Zotero/storage/66Z5A4RH/Beer et al. - 2016 - Vector mechanics for engineers. Dynamics.pdf} -} - -@book{beerVectorMechanicsEngineers2016a, - title = {{Vector mechanics for engineers. Statics}}, - author = {Beer, Ferdinand P. and Johnston, E. Russell and Mazurek, David F.}, - year = {2016}, - edition = {Eleventh edition}, - publisher = {{McGraw-Hill Education}}, - address = {{New York, NY}}, - isbn = {978-0-07-768730-4}, - langid = {french}, - lccn = {TA350 .B3552 2016b}, - keywords = {{Mechanics, Applied},Statics,Vector analysis}, - file = {/Users/fabio/Zotero/storage/4VH4XFAC/Beer et al. - 2016 - Vector mechanics for engineers. Statics.pdf} -} - -@article{behlAnalysisIndustryCircular2023, - title = {Analysis of {{Industry}} 4.0 and Circular Economy Enablers: {{A}} Step towards Resilient Sustainable Operations Management}, - shorttitle = {Analysis of {{Industry}} 4.0 and Circular Economy Enablers}, - author = {Behl, Abhishek and Singh, Ramandeep and Pereira, Vijay and Laker, Benjamin}, - year = {2023}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {189}, - pages = {122363}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122363}, - urldate = {2023-02-12}, - abstract = {Originating in Germany, Industry 4.0 quickly became the new standard with industries adopting it worldwide. However, in the hurry to become digitalized for increasing production and efficiency, industries have failed at embracing the sustainability aspect of production. With the rise in concern for environmental safety and the re-introduction of circular economy, the authors have identified the integration of I4.0 and CE as a strong research point for overcoming the obstacles in achieving sustainable operations management (SOM). The research explains the criticality of the integration of I4.0 and CE and how it is the next step in becoming sustainable and resilient in today's turbulent environment. The study incorporates a four-step hybrid methodology with the identification and validation of enablers as the first phase using the PRISMA statement and PF-Delphi technique respectively. The second phase employs the PF-AHP technique for calculating the criteria weights which are subsequently used in the third phase by applying PF-CoCoSo to rank the enablers in priority order. Lastly, sensitivity analysis is performed to check the robustness of the results. The paper identified service and policy framework as the most critical criteria and product lifecycle management as the highest priority enabler for achieving SOM. The authors have also put forward seven recommendations for industries looking to implement I4.0 and CE for SOM by taking instances from previous case studies.}, - langid = {english}, - keywords = {Circular economy,Enablers,Industry 4.0,PF-CoCoSo,PF-Delphi,PH-AHP,Sensitivity analysis,Sustainable operations management}, - file = {/Users/fabio/Zotero/storage/BCAZU3CF/Behl et al_2023_Analysis of Industry 4.pdf} -} - -@article{behlGamificationElearningYoung2022, - title = {Gamification and E-Learning for Young Learners: {{A}} Systematic Literature Review, Bibliometric Analysis, and Future Research Agenda}, - author = {Behl, Abhishek and Jayawardena, Nirma and Pereira, Vijay and Islam, Nazrul and Giudice, Manlio Del and Choudrie, Jyoti}, - year = {2022}, - month = mar, - journal = {Technological Forecasting and Social Change}, - volume = {176}, - pages = {121445}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121445}, - urldate = {2022-01-25} -} - -@article{behzadiWritingStrongScientific2021, - title = {Writing a Strong Scientific Paper in Medicine and the Biomedical Sciences: A Checklist and Recommendations for Early Career Researchers}, - shorttitle = {Writing a Strong Scientific Paper in Medicine and the Biomedical Sciences}, - author = {Behzadi, Payam and Gajd{\'a}cs, M{\'a}ri{\'o}}, - year = {2021}, - month = dec, - journal = {Biologia Futura}, - volume = {72}, - number = {4}, - pages = {395--407}, - issn = {2676-8607}, - doi = {10.1007/s42977-021-00095-z}, - urldate = {2023-01-14}, - abstract = {Scientific writing is an important skill in both academia and clinical practice. The skills for writing a strong scientific paper are necessary for researchers (comprising academic staff and health-care professionals). The process of a scientific research will be completed by reporting the obtained results in the form of a strong scholarly publication. Therefore, an insufficiency in scientific writing skills may lead to consequential rejections. This feature results in undesirable impact for their academic careers, promotions and credits. Although there are different types of papers, the original article is normally the outcome of experimental/epidemiological research. On the one hand, scientific writing is part of the curricula for many medical programs. On the other hand, not every physician may have adequate knowledge on formulating research results for publication adequately. Hence, the present review aimed to introduce the details of creating a strong original article for publication (especially for novice or early career researchers).}, - langid = {english}, - keywords = {Abstracting and indexing,Academic training,Clinical medicine,Medical publications,Peer review,Publications,Scientific research}, - file = {/Users/fabio/Zotero/storage/35MG82MY/Behzadi_Gajdács_2021_Writing a strong scientific paper in medicine and the biomedical sciences.pdf} -} - -@article{Beier2020, - title = {Industry 4.0: {{How}} It Is Defined from a Sociotechnical Perspective and How Much Sustainability It Includes \textendash{} {{A}} Literature Review}, - author = {Beier, Grischa and Ullrich, Andr{\'e} and Niehoff, Silke and Rei{\ss}ig, Malte and Habich, Matthias}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {259}, - pages = {120856}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120856}, - urldate = {2020-03-23}, - abstract = {Industry 4.0 has had a strong influence on the debate on the digitalization of industrial processes, despite being criticized for lacking a proper definition. However, Industry 4.0 might offer a huge chance to align the goals of a sustainable development with the ongoing digital transformation in industrial development. The main contribution of this paper is therefore twofold. We provide a de-facto definition of the concept ``Industry 4.0'' from a sociotechnical perspective based on its most often cited key features, as well as a thorough review of how far the concept of sustainability is incorporated in it.}, - file = {/Users/fabio/Zotero/storage/S3GXUVEE/full-text.pdf} -} - -@article{Beiler2020, - title = {Reverse Logistics System Analysis of a {{Brazilian}} Beverage Company: {{An}} Exploratory Study}, - author = {Beiler, Bruno Caride and Ign{\'a}cio, Paulo S{\'e}rgio de Arruda and Pacagnella J{\'u}nior, Ant{\^o}nio Carlos and Anholon, Rosley and Rampasso, Izabela Simon}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {274}, - pages = {122624}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122624} -} - -@incollection{Bekker2000, - title = {User {{Involvement}} in the {{Design}} of {{Human}}\textemdash{{Computer Interactions}}: {{Some Similarities}} and {{Differences}} between {{Design Approaches}}}, - booktitle = {People and {{Computers XIV}} \textemdash{} {{Usability}} or {{Else}}!}, - author = {Bekker, Mathilde and Long, John}, - year = {2000}, - pages = {135--147}, - doi = {10.1007/978-1-4471-0515-2_10}, - abstract = {Tbis paper reviews user involvemenet in the design of human-computer interactions, as advocated by a selection of different approaches to design. The selection comprises User-Centred Design; Participatory Design; Socio-Technical Design; Soft Systems Methodology; and Joint Application Design. The review reveals a preliminary identification of non-configurable and configurable}, - isbn = {978-1-85233-318-8}, - keywords = {participato,user involvement,user-centred design} -} - -@article{Belgin2019, - title = {Analysing {{R}}\&{{D}} Efficiency of {{Turkish}} Regions Using Data Envelopment Analysis}, - author = {Belgin, Onder}, - year = {2019}, - month = may, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--12}, - issn = {0953-7325}, - doi = {10.1080/09537325.2019.1613521} -} - -@article{bellandiSocialInnovationGovernance2021, - title = {Social Innovation Governance and the Role of Universities: {{Cases}} of Quadruple Helix Partnerships in {{Italy}}}, - author = {Bellandi, Marco and Donati, Letizia and Cataneo, Alessandra}, - year = {2021}, - month = mar, - journal = {Technological Forecasting and Social Change}, - volume = {164}, - pages = {120518}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120518}, - urldate = {2020-12-21} -} - -@article{Bellehumeur2004, - title = {Modeling of {{Bond Formation Between Polymer Filaments}} in the {{Fused Deposition Modeling Process}}}, - author = {Bellehumeur, C{\'e}line and Li, Longmei and Sun, Qian and Gu, Peihua}, - year = {2004}, - month = jan, - journal = {Journal of Manufacturing Processes}, - volume = {6}, - number = {2}, - pages = {170--178}, - issn = {15266125}, - doi = {10.1016/S1526-6125(04)70071-7}, - urldate = {2015-03-05}, - keywords = {abs,acrylonitrile,butadiene styrene,facturing,freeform fabrication,laminated object manu-,polymer sintering,rapid prototyping,thermal analysis}, - file = {/Users/fabio/Zotero/storage/EGGGUJCG/Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process.pdf} -} - -@article{Bellini2003, - title = {Mechanical Characterization of Parts Fabricated Using Fused Deposition Modeling}, - author = {Bellini, Anna and G{\"u}{\c c}eri, Sel{\c c}uk}, - year = {2003}, - month = oct, - journal = {Rapid Prototyping Journal}, - volume = {9}, - number = {4}, - pages = {252--264}, - issn = {1355-2546}, - doi = {10.1108/13552540310489631}, - urldate = {2015-03-12}, - file = {/Users/fabio/Zotero/storage/DRENRILJ/Bellini, Güçeri - 2003 - Mechanical characterization of parts fabricated using fused deposition modeling.pdf} -} - -@article{Bellini2004, - title = {Liquefier {{Dynamics}} in {{Fused Deposition}}}, - author = {Bellini, Anna and Guceri, Selcuk and Bertoldi, Maurizio}, - year = {2004}, - journal = {Journal of Manufacturing Science and Engineering}, - volume = {126}, - number = {2}, - pages = {237}, - issn = {10871357}, - doi = {10.1115/1.1688377}, - urldate = {2015-03-05}, - file = {/Users/fabio/Zotero/storage/3APJGM4Z/Bellini, Guceri, Bertoldi - 2004 - Liquefier Dynamics in Fused Deposition.pdf} -} - -@article{Bellini2005, - title = {New Developments in Fused Deposition Modeling of Ceramics}, - author = {Bellini, Anna and Shor, Lauren and Guceri, Selcuk I.}, - year = {2005}, - month = sep, - journal = {Rapid Prototyping Journal}, - volume = {11}, - number = {4}, - pages = {214--220}, - issn = {1355-2546}, - doi = {10.1108/13552540510612901}, - urldate = {2015-02-06}, - isbn = {1355254051}, - file = {/Users/fabio/Zotero/storage/VSZ9V5ZI/Bellini, Shor, Guceri - 2005 - New developments in fused deposition modeling of ceramics.pdf} -} - -@article{belmonte-urenaCircularEconomyDegrowth2021, - title = {Circular Economy, Degrowth and Green Growth as Pathways for Research on Sustainable Development Goals: {{A}} Global Analysis and Future Agenda}, - author = {{Belmonte-Ure{\~n}a}, Luis Jes{\'u}s and {Plaza-{\'U}beda}, Jos{\'e} Antonio and {Vazquez-Brust}, Diego and Yakovleva, Natalia}, - year = {2021}, - month = jul, - journal = {Ecological Economics}, - volume = {185}, - pages = {107050}, - publisher = {{Elsevier B.V.}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107050}, - urldate = {2021-04-29}, - abstract = {Using bibliometric techniques, we evaluate the contribution of current academic research to the advancement of sustainable development agenda as expressed in the UN Sustainable Development Goals (SDGs) targets. We focus on four knowledge domains highly relevant to the ethos of sustainable development, each with a distinct approach, to finding a balance between ecological and economic systems when it comes to development: ``Circular Economy'' (CE), ``Degrowth'' (DG), Green Growth'' (GG), and research specifically addressing sustainable development goals that we refer to as ``SDG Research'' (SDGR). We evaluate two dimensions: scope \textendash{} the extent to which the full range of UN Sustainable Develpment (SD) Agenda 2030 topics expressed in targets and indicators for each SDG are explored; and intensity- the quantity of research focusing on each SDG. Our analysis demonstrates that the four knowledge domains examined: CE, DG, GG and the emerging domain labelled SDGR, have made important contributions to research related with the 17 UN SDGs. However, these contributions are heterogeneous with important differences according to the SDGs. We find that academic research does not fully align with the policy agenda, identifying several gaps. The disparate coverage of SDGs priorities by academics may compromise the progress and implementation of the UN Sustainable Development Agenda 2030.}, - keywords = {Bibliometric analysis,Circular Economy,Degrowth,Green Growth,Sustainability,Sustainable development goals} -} - -@article{Belokon2017a, - title = {Increasing the {{Efficiency}} of the {{Recycling}} of {{Propylene}}\textemdash{{Polyethylene Raw Materials}}}, - author = {Belokon', T. D. and Kurganova, Yu A. and Bragin, D. A. and Kovalev, M. N.}, - year = {2017}, - month = dec, - journal = {Russian Metallurgy (Metally)}, - volume = {2017}, - number = {13}, - pages = {1099--1102}, - publisher = {{Pleiades Publishing}}, - issn = {15556255}, - doi = {10.1134/S0036029517130055}, - urldate = {2020-04-08}, - abstract = {The problem of the recycling of plastic wastes is discussed. The polypropylene needs of the modern Russian market are analyzed. The necessity of recycling of plastic wastes is revealed, and its advantages over reclamation are substantiated. The problems of a real enterprise regarding the recycling of polypropylene\textemdash polyethylene raw materials for increasing the properties of the end product and optimizing its production are considered, and methods for their solution are proposed.}, - keywords = {plastic wastes,polyethylene,polypropylene,polypropylene oxidation,recycling,self-cleaning filter}, - file = {/Users/fabio/Zotero/storage/NB8R2QQP/Increasing the Efficiency of the Recycling of Propylene–Polyethylene Raw Materials.pdf} -} - -@article{Beltagui2019, - title = {The Role of {{3D}} Printing and Open Design on Adoption of Socially Sustainable Supply Chain Innovation}, - author = {Beltagui, Ahmad and Kunz, Nathan and Gold, Stefan}, - year = {2019}, - journal = {International Journal of Production Economics}, - number = {July}, - pages = {1--16}, - publisher = {{Elsevier B.V.}}, - issn = {09255273}, - doi = {10.1016/j.ijpe.2019.07.035}, - keywords = {3D printing,additive manufacturing,Additive manufacturing,Open design,Open source innovation,Social sustainability,System dynamics}, - file = {/Users/fabio/Zotero/storage/TMCQJTUY/The role of 3D printing and open design on adoption of socially sustainable supply chain innovation.pdf} -} - -@article{Beltagui2020, - title = {A Bricolage Perspective on Democratising Innovation: {{The}} Case of {{3D}} Printing in Makerspaces}, - author = {Beltagui, Ahmad and Sesis, Achilleas and Stylos, Nikolaos}, - year = {2021}, - month = feb, - journal = {Technological Forecasting and Social Change}, - volume = {163}, - pages = {120453}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120453}, - urldate = {2021-01-07}, - abstract = {The availability of digital technologies such as 3D printing can allow members of the public rather than only producers, to innovate. Makerspaces, where communities of individuals share access to such technologies may therefore support the democratisation of innovation. Yet little is known about how and why makerspace members use 3D printing to realise their creative and commercial ambitions. Through an ethnographic study, we identify a bricolage approach whereby makerspace members combine 3D printing with whatever resources are at hand in a makerspace, to generate innovations that otherwise may not be realised. In this context, we find bricolage entails synergy - combining resources in creative ways - and openness - a willingness to gather and share resources. We confirm that bricolage restricts commercial growth such that a need for more structured processes and perhaps a move away from makerspaces eventually becomes necessary. We contribute to theory by presenting makerspaces as a route to innovation in resource constrained contexts, or those in which neither a problem nor solution are clearly defined. This contrasts with crowdsourcing where problems but not solutions are defined, and R\&D where both problem and expected solution are defined.}, - isbn = {2020.120453}, - keywords = {3D printing,Bricolage,Crowdsourcing,Democratising,Do-it-yourself,Makerspace}, - file = {/Users/fabio/Zotero/storage/57R6YKAS/Beltagui, Sesis, Stylos - 2020 - A bricolage perspective on democratising innovation The case of 3D printing in makerspaces.pdf} -} - -@article{Beltagui2020a, - title = {Exaptation in a Digital Innovation Ecosystem: {{The}} Disruptive Impacts of {{3D}} Printing}, - author = {Beltagui, Ahmad and Rosli, Ainurul and Candi, Marina}, - year = {2020}, - month = feb, - journal = {Research Policy}, - volume = {49}, - number = {1}, - pages = {103833}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103833}, - file = {/Users/fabio/Zotero/storage/EDT6QXRU/Exaptation in a digital innovation ecosystem- The disruptive impacts of 3D printing.pdf} -} - -@article{Belton2019, - title = {Improving the Practical Application of the {{Delphi}} Method in Group-Based Judgment: {{A}} Six-Step Prescription for a Well-Founded and Defensible Process}, - author = {Belton, Ian and MacDonald, Alice and Wright, George and Hamlin, Iain}, - year = {2019}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {147}, - pages = {72--82}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.07.002}, - urldate = {2020-03-14}, - abstract = {This paper provides a practical, systematic approach to the design and delivery of a Delphi survey. We prescribe a sequence of six steps to do with (i) setting up the Delphi process \textendash{} including selecting respondents and generating a requisite number of focal issues, (ii) software/delivery choice, (iii) developing question items and response scales, (iv) providing feedback between a requisite number of Delphi rounds, (v) preventing and dealing with panellist drop out, and (vi) analysing and presenting the Delphi yield. At each step, the Delphi administrator has a range of choice options and we provide discussion of the pros and cons of each option - in order that the overall design and delivery of a particular Delphi survey is both well-founded and defensible.}, - keywords = {Consensus,Delphi,Expert,Judgment,Methodology,Review} -} - -@article{beltonDelphiFeedbackRationales2021, - title = {Delphi with Feedback of Rationales: {{How}} Large Can a {{Delphi}} Group Be Such That Participants Are Not Overloaded, de-Motivated, or Disengaged?}, - author = {Belton, Ian and Wright, George and Sissons, Aileen and Bolger, Fergus and Crawford, Megan M. and Hamlin, Iain and Taylor~Browne~L{\=u}ka, Courtney and Vasilichi, Alexandrina}, - year = {2021}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {170}, - pages = {120897}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120897}, - urldate = {2021-06-10} -} - -@article{Beltran2019, - title = {Mechanical Recycling of Poly(Lactic Acid): {{Evaluation}} of a Chain Extender and a Peroxide as Additives for Upgrading the Recycled Plastic.}, - author = {Beltr{\'a}n, Freddys R. and Infante, Celia and {de la Orden}, Ma Ulagares and Mart{\'i}nez Urreaga, Joaqu{\'i}n}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {219}, - pages = {46--56}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.01.206}, - file = {/Users/fabio/Zotero/storage/RTTVXV4K/Mechanical recycling of poly(lactic acid) Evaluation of a chain extender and a peroxide as additives for upgrading the recycled plastic.pdf} -} - -@article{Beltran2021, - title = {Technical Evaluation of Mechanical Recycling of Pla 3d Printing Wastes}, - author = {Beltr{\'a}n, Freddys R. and Arrieta, Marina P. and Moreno, Eduardo and Gaspar, Gerald and Muneta, Luisa M. and {Carrasco-Gallego}, Ruth and Y{\'a}{\~n}ez, Susana and {Hidalgo-Carvajal}, David and {de la Orden}, Mar{\'i}a U. and Urreaga, Joaqu{\'i}n Mart{\'i}nez}, - year = {2021}, - journal = {Polymers}, - volume = {13}, - number = {8}, - issn = {20734360}, - doi = {10.3390/polym13081247}, - abstract = {3D printing PLA wastes were recovered from a well-known reference grade and from different sources. The recovered wastes were subjected to an energic washing step and then repro-cessed into films by melt-extrusion, followed by compression molding to simulate the industrial processing conditions. The obtained materials were characterized and the optical, structural, thermal and crystallization behavior are reported. The mechanical recycling process leads to an increase of the crystallinity and a decrease of the intrinsic viscosity of the formulations, particularly in the sample based on blends of different 3D-PLA wastes. Moreover, the obtained films were disintegrated under composting conditions in less than one month and it was observed that recycled materials degrade somewhat faster than the starting 3D-PLA filament, as a consequence of the presence of shorter polymer chains. Finally, to increase the molecular weight of the recycled materials, the 3D-PLA wastes were submitted to a solid-state polymerization process at 110, 120, and 130{$\smwhtcircle$}C, observing that the recycled 3D-wastes materials based on a well-known reference grade experiences an improvement of the intrinsic viscosity, while that coming from different sources showed no significant changes. Thus, the results show that 3D printing PLA products provides an ideal environment for the implementation of distributed recycling program, in which wastes coming from well-known PLA grades can successfully be processed in films with good overall performance.}, - keywords = {3D printing,Distributed recycling,Mechanical recycling,Poly (lactic acid)}, - file = {/Users/fabio/Zotero/storage/ZPQ6TNI7/polymers-13-01247.pdf} -} - -@article{belyamaniRecyclingunsortablePostconsumer2021, - title = {Toward Recycling ʺunsortableʺ Post-Consumer {{WEEE}} Stream: {{Characterization}} and Impact of Electron Beam Irradiation on Mechanical Properties}, - author = {Belyamani, Imane and Maris, Joachim and Bourdon, Sylvie and Brossard, Jean-Michel and Cauret, Laurent and Fontaine, Laurent and Montembault, V{\'e}ronique}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {294}, - pages = {126300}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126300}, - urldate = {2021-02-28}, - file = {/Users/fabio/Zotero/storage/CPNGZTVG/full-text.pdf} -} - -@article{Ben-Slimane2020, - title = {The Legitimation Strategies of Early Stage Disruptive Innovation}, - author = {{Ben-Slimane}, Karim and Diridollou, C{\'e}dric and Hamadache, Karim}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120161}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120161}, - urldate = {2020-06-22} -} - -@article{benavidesAssessingFuturesLiteracy2021, - title = {Assessing Futures Literacy as an Academic Competence for the Deployment of Foresight Competencies}, - author = {Benavides, Guillermina and {D{\'i}az-Dom{\'i}nguez}, Alejandro}, - year = {2021}, - month = nov, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2021.102872}, - urldate = {2021-11-30} -} - -@article{benedekCreativityMythsPrevalence2021, - title = {Creativity {{Myths}}: {{Prevalence}} and {{Correlates}} of {{Misconceptions}} on {{Creativity}}}, - author = {Benedek, Mathias and Karstendiek, Martin and Ceh, Simon M. and Grabner, Roland H. and Krammer, Georg and Lebuda, Izabela and Silvia, Paul J. and Cotter, Katherine N. and Li, Yangping and Hu, Weiping and Martskvishvili, Khatuna and Kaufman, James C.}, - year = {2021}, - month = nov, - journal = {Personality and Individual Differences}, - volume = {182}, - number = {June}, - pages = {111068}, - publisher = {{Elsevier Ltd}}, - issn = {0191-8869}, - doi = {10.1016/j.paid.2021.111068}, - urldate = {2021-07-05}, - keywords = {{Creativity,Myths,Personality,Neuroscience}}, - file = {/Users/fabio/Zotero/storage/NB8IB9WU/full-text.pdf} -} - -@article{bengstonAbruptClimateChange2020, - title = {Abrupt {{Climate Change}}: {{Exploring}} the {{Implications}} of a {{Wild Card}}}, - author = {Bengston, David N. and Crabtree, Jason and Hujala, Teppo}, - year = {2020}, - month = sep, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102641}, - urldate = {2020-09-29} -} - -@article{beningCircularPlasticsEconomy2021, - title = {Towards a Circular Plastics Economy: {{Interacting}} Barriers and Contested Solutions for Flexible Packaging Recycling}, - author = {Bening, Catharina R. and Pruess, Jakob T. and Blum, Nicola U.}, - year = {2021}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {302}, - pages = {126966}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126966}, - urldate = {2021-04-29}, - abstract = {The concept of a Circular Economy (CE) stands out as a holistic approach to mitigate the detrimental effects of traditionally linear economies. However, the transition towards circular systems of production and consumption does not happen automatically. While barriers are often analyzed in isolation and assumed to be equally relevant in an industry, this article focuses on the interrelation of regulatory with other barriers and explores disagreements between different actors in a value chain. By taking a value chain perspective on the case of recycling in flexible packaging, we highlight how regulatory barriers are affected by economic and technical barriers. We also find that different value chain players have divergent views on how best to remove current (regulatory) barriers. We term the subjects of such disagreement ``contested solutions.'' Researchers aiming to inform policy-making should consider such contested solutions, ideally by extending their barrier analyses accordingly.} -} - -@article{beningTrueCostSolving2022, - title = {The True Cost of Solving the Plastic Waste Challenge in Developing Countries: {{The}} Case of {{Ghana}}}, - author = {Bening, Catharina R. and Kahlert, Sebastian and Asiedu, Edward}, - year = {2022}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {330}, - pages = {129649}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129649}, - urldate = {2021-12-10} -} - -@article{benitoInfluenceSelectedAspects2021, - title = {Influence of Selected Aspects of Local Governance on the Efficiency of Waste Collection and Street Cleaning Services}, - author = {Benito, Bernardino and Guillam{\'o}n, Mar{\'i}a Dolores and {Mart{\'i}nez-C{\'o}rdoba}, Pedro Jos{\'e} and R{\'i}os, Ana Mar{\'i}a}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {126}, - pages = {800--809}, - publisher = {{Pergamon}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2021.04.019}, - urldate = {2021-04-29}, - abstract = {Currently, in all developed countries there is great interest in improving democratic practices in local governments, as the administration closest to citizens. However, the possible influence of these actions on the management of public services and municipal finances have been side-lined, despite the great interest in evaluating the performance of local governments under budgetary constraints. Our research aims to fill this knowledge gap by studying the impact of key aspects of local governance (transparency and citizen participation), together with other environmental variables, on the efficiency of two municipal public services of both qualitative and quantitative importance: waste collection and street cleaning. The results show that the type of management, population density, the tourist activity of the municipality and the strength of local government are determinants that explain the efficiency of the public services examined in this research, while transparency and citizen participation have little impact.}, - pmid = {33895563}, - keywords = {Citizen participation,Efficiency,Local governance,Local government,Street cleaning,Transparency,Waste collection} -} - -@book{Benkler207, - title = {The {{Wealth}} of {{Networks}}}, - author = {Benkler, Yochai}, - year = {2006}, - publisher = {{Yale University Press}}, - isbn = {978-0-300-11056-2}, - file = {/Users/fabio/Zotero/storage/ZP48WBJF/Benkler - 2006 - The Wealth of Networks.pdf} -} - -@article{Benson2014, - title = {The {{End}} of {{Sustainability}}}, - author = {Benson, Melinda Harm and Craig, Robin Kundis}, - year = {2014}, - journal = {Society and Natural Resources}, - volume = {27}, - number = {7}, - pages = {777--782}, - publisher = {{Routledge}}, - issn = {15210723}, - doi = {10.1080/08941920.2014.901467}, - urldate = {2021-05-03}, - abstract = {It is time to move past the concept of sustainability. The realities of the Anthropocene warrant this conclusion. They include unprecedented and irreversible rates of human-induced biodiversity loss, exponential increases in per-capita resource consumption, and global climate change. These factors combine to create an increasing likelihood of rapid, nonlinear, social and ecological regime changes. The recent failure of the Rio + 20 provides an opportunity to collectively reexamine-and ultimately move past-the concept of sustainability as an environmental goal. We must face the impossibility of defining-let alone pursuing-a goal of "sustainability" in a world characterized by such extreme complexity, radical uncertainty and lack of stationarity. After briefly examining sustainability's failure, we propose resilience thinking as one possible new orientation and point to the challenges associated with translating resilience theory into policy application. \textcopyright{} 2014 Taylor \& Francis Group, LLC.}, - keywords = {Anthropocene,resilience,sustainability}, - file = {/Users/fabio/Zotero/storage/IXR9WFYQ/full-text.pdf} -} - -@article{berardiSupplyChainCollaboration2021, - title = {Supply Chain Collaboration for a Circular Economy - {{From}} Transition to Continuous Improvement}, - author = {Berardi, Patricia Calicchio and {Peregrino de Brito}, Renata}, - year = {2021}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {328}, - pages = {129511}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129511}, - urldate = {2021-11-07}, - abstract = {The circular economy (CE) is a valid alternative for replacing the current linear model, which causes resource depletion, yet there is much to be developed and a lot of innovation required for such a purpose, and organizations must collaborate to find common solutions. This study examines how supply chain collaboration challenges have been addressed in CE research. Based on a systematic literature review, we demonstrate that, despite being emphasized as fundamental to the advance of a CE, supply chain collaboration suffers from various constraints. The ability to select partners and develop a trustworthy relationships is rare and has implications for the success and continuity of collaboration. We also find that the principles of circularity are not always observed and that several studies present isolated circular practices in a linear logic. In view of these results, we prepare propositions regarding the incorporation of social and governance capabilities in the transition and further improvement process of a circular economy. There are many obstacles to a CE model, and the collaborative capabilities of selected partners are important factors that deserve more attention from managers.} -} - -@article{Berg2019, - title = {When Silver Is Gold: {{Forecasting}} the Potential Creativity of Initial Ideas}, - author = {Berg, Justin M.}, - year = {2019}, - month = sep, - journal = {Organizational Behavior and Human Decision Processes}, - volume = {154}, - pages = {96--117}, - issn = {07495978}, - doi = {10.1016/j.obhdp.2019.08.004} -} - -@inproceedings{Bergvall-kareborn2009, - title = {A {{Milieu}} for {{Innovation}} \textendash{} {{Defining Living Labs}}}, - booktitle = {2nd {{ISPIM Innovation Symposium}}}, - author = {{Bergvall-k{\aa}reborn}, Birgitta and Eriksson, Carina Ihlstr{\"o}m and St{\aa}hlbr{\"o}st, Anna and Svensson, Jesper}, - year = {2009}, - address = {{New York}}, - abstract = {A new trend of user involvement in open innovation processes has emerged. Concurring with this trend the Living Lab concept has been re- vitalized. This concept has attracted attention lately, but there exist no coherent view. In this paper we discuss and define the concept and propose five key components and five key principles for Living Labs based on experiences from over 30 development and research projects within two Living Labs, Botnia Living Lab and Halmstad Living Lab. The key components are: ICT \& Infrastructure; Management; Partners \& Users; Research; and Approach. The key principles are: Openness; Influence; Realism; Value; and Sustainability. Our proposed definition of a Living Lab is: A Living Lab is a user-centric innovation milieu built on every-day practice and research, with an approach that facilitates user influence in open and distributed innovation processes engaging all relevant partners in real-life contexts, aiming to create sustainable values.}, - keywords = {definition,influence,living lab,open innovation,openness,principles,realism,sustainability,users,value} -} - -@inproceedings{Bergvall-Kareborn2009b, - title = {Concept Design with a Living Lab Approach}, - booktitle = {Proceedings of the 42nd {{Annual Hawaii International Conference}} on {{System Sciences}}, {{HICSS}}}, - author = {{Bergvall-K{\aa}reborn}, Birgitta and Holst, Marita and St{\aa}hlbr{\"o}st, Anna}, - year = {2009}, - pages = {1--10}, - address = {{Hawaii}}, - issn = {1530-1605}, - doi = {10.1109/HICSS.2009.123}, - abstract = {Living Labs is a rather new research area and phenomena that introduces new ways of managing innovation processes. The underlying idea is that people's ideas, experiences, and knowledge, as well as their daily needs of support from products, services, or applications, should be the starting point in innovation. This paper illuminates experiences and accumulated knowledge to the area of concept design in an innovation process within a Living Lab. FormIT, a methodology developed for innovation processes within Living Labs is introduced through an illustration of how it has been utilised in a case. The experiences and the method are related to characteristics of Living Labs, and the paper closes with some concluding remarks in relation to concept design in a Living Lab.}, - isbn = {978-0-7695-3450-3} -} - -@article{Bergvall-Kareborn2015, - title = {Places and {{Spaces}} - {{Their Influence}} on {{Innovation Milieus}} and {{Innovation Processes}}.}, - author = {{Bergvall-K{\aa}reborn}, Birgitta and Eriksson, Carina Ihlstr{\"o}m and St{\aa}hlbr{\"o}st, Anna}, - year = {2015}, - journal = {Proceedings of ISPIM Conferences}, - number = {June}, - pages = {1--10}, - abstract = {Intensified and matured use of internet-based technologies aimed to facilitate development and innovation are increasingly characterized by a mixture of physical and digital locations; commonly referred to as places and spaces. The aim of this paper was therefore to identify different types of places and spaces central for the innovation milieus and processes of Living Lab projects, illustrate their impact on both process and results, and develop guidelines for space that can be designed in order to facilitate value-driven and democratized innovation. Based on a literature review and a cross case analyses different aspects of space, relevant for Innovation and Living Lab studies, have been identified: 1) local-global; 2) physical and digital, and 3) private-public. In the paper we focus on these concepts as tools for understanding present day innovation and we examples of how digital technology has influenced placement and permeability in relation to place and space. [ABSTRACT FROM AU)}, - keywords = {Business development,Digital,Global,Innovation,Innovations in business,Living Lab,Local,Permeability Physical,Place,Placement,Private,Public,Public-private sector cooperation,Space,Space industrialization,Stakeholders} -} - -@article{Berman2012, - title = {3-{{D}} Printing: {{The}} New Industrial Revolution}, - author = {Berman, Barry}, - year = {2012}, - journal = {Business Horizons}, - volume = {55}, - number = {2}, - pages = {155--162}, - publisher = {{"Kelley School of Business, Indiana University"}}, - issn = {00076813}, - doi = {10.1016/j.bushor.2011.11.003}, - abstract = {This article examines the characteristics and applications of 3-D printing and compares it with mass customization and other manufacturing processes. 3-D printing enables small quantities of customized goods to be produced at relatively low costs. While currently used primarily to manufacture prototypes and mockups, a number of promising applications exist in the production of replacement parts, dental crowns, and artificial limbs, as well as in bridge manufacturing. 3-D printing has been compared to such disruptive technologies as digital books and music downloads that enable consumers to order their selections online, allow firms to profitably serve small market segments, and enable companies to operate with little or no unsold finished goods inventory. Some experts have also argued that 3-D printing will significantly reduce the advantages of producing small lot sizes in low-wage countries via reduced need for factory workers. \textcopyright{} 2011 Kelley School of Business, Indiana University.}, - keywords = {3-D printing,Additive manufacturing,Bridge manufacturing,Digital manufacturing,Rapid prototyping,Rapid tooling}, - file = {/Users/fabio/Zotero/storage/A942N7TJ/Berman - 2012 - 3-D printing The new industrial revolution.pdf} -} - -@article{Bernard2002, - title = {New {{Trends}} in {{Rapid Product Development}}}, - author = {Bernard, Alain and Fischer, a.}, - year = {2002}, - month = jan, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {51}, - number = {2}, - pages = {635--652}, - issn = {00078506}, - doi = {10.1016/S0007-8506(07)61704-1}, - keywords = {data integration,rapid product development,technology modeling}, - file = {/Users/fabio/Zotero/storage/CCAW8RG8/New Trends in Rapid Product Development.pdf} -} - -@article{bernatPostConsumerPlasticWaste2023, - title = {Post-{{Consumer Plastic Waste Management}}: {{From Collection}} and {{Sortation}} to {{Mechanical Recycling}}}, - shorttitle = {Post-{{Consumer Plastic Waste Management}}}, - author = {Bernat, Katarzyna}, - year = {2023}, - month = jan, - journal = {Energies}, - volume = {16}, - number = {8}, - pages = {3504}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {1996-1073}, - doi = {10.3390/en16083504}, - urldate = {2023-08-30}, - abstract = {Challenges associated with plastic waste management range from littering to high collection costs to low recycling rates. Effective collection of plastics is obviously an important step in the management of plastic waste and has an impact on recycling rates. For this reason, several countries have transformed their collection systems in recent decades. Collecting more plastic packaging comes at a cost, as the feedstock for the sorting process becomes more complex and leads to cross-contamination within the sorted fractions. Therefore, a balance must be obtained between some elements, such as the design of packaging, collection and recycling rates, and finally, the quality of fractions that have been sorted. Further investment to improve pretreatment, sorting, and recycling technologies and simpler recyclable packaging designs are, therefore, key to further increasing plastic recycling rates. It is essential to possess more data, especially on the type of containers and plastics, and examine how often unsorted waste is collected. The automated waste collection monitoring system is a step forward in automating manual waste collection and sorting. Multi-sensory artificial intelligence (AI) for sorting plastic waste and the blockchain sorting platform for the circular economy of plastic waste are forward-looking activities that will increase the efficiency of recycling plastic waste. This review focuses on the development of collection systems and sorting processes for post-consumer plastic recycling. The focus is on best practices and the best available technology. Separate collection systems for recyclable plastics are presented and discussed along with their respective technical collection and sorting solutions, taking into consideration that progress in separation and sorting systems are implicitly linked to approaches to waste collection.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {advanced processes,automatization,collection systems,plastic packaging,plastic waste management,recyclables,sorting solutions,types of polymers}, - file = {/Users/fabio/Zotero/storage/D69GYZJS/Bernat - 2023 - Post-Consumer Plastic Waste Management From Colle.pdf} -} - -@article{Bernstad2014, - title = {Household Food Waste Separation Behavior and the Importance of Convenience}, - author = {Bernstad, Anna}, - year = {2014}, - journal = {Waste Management}, - volume = {34}, - number = {7}, - pages = {1317--1323}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2014.03.013}, - abstract = {Two different strategies aiming at increasing household source-separation of food waste were assessed through a case-study in a Swedish residential area (a) use of written information, distributed as leaflets amongst households and (b) installation of equipment for source-segregation of waste with the aim of increasing convenience food waste sorting in kitchens. Weightings of separately collected food waste before and after distribution of written information suggest that this resulted in neither a significant increased amount of separately collected food waste, nor an increased source-separation ratio. After installation of sorting equipment in households, both the amount of separately collected food waste as well as the source-separation ratio increased vastly. Long-term monitoring shows that results where longstanding. Results emphasize the importance of convenience and existence of infrastructure necessary for source-segregation of waste as important factors for household waste recycling, but also highlight the need of addressing these aspects where waste is generated, i.e. already inside the household. \textcopyright{} 2014 Elsevier Ltd.}, - isbn = {1879-2456 (Electronic)\textbackslash r0956-053X (Linking)}, - pmid = {24780762}, - keywords = {Convenience,Food waste,Information,Recycling,Separate collection,Source-segregation}, - file = {/Users/fabio/Zotero/storage/5YGKDPTD/Household food waste separation behavior and the importance of convenience.pdf} -} - -@article{bertassiniCircularBusinessEcosystem2020, - title = {Circular {{Business Ecosystem Innovation}}: A Guide for Mapping Stakeholders, Capturing Values, and Finding New Opportunities}, - author = {Bertassini, Ana Carolina and Zanon, Lucas Gabriel and Azarias, Jean Guilherme and Gerolam, Mateus Cecilio and Omettoo, Aldo Roberto}, - year = {2020}, - month = dec, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.12.004}, - urldate = {2020-12-14} -} - -@article{bertinEnvironmentalImpactsDesign2022, - title = {Environmental Impacts of {{Design}} for {{Reuse}} Practices in the Building Sector}, - author = {Bertin, Ingrid and Saad{\'e}, Myriam and Le Roy, Robert and Jaeger, Jean-Marc and Feraille, Ad{\'e}la{\"i}de}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - pages = {131228}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131228}, - urldate = {2022-03-14} -} - -@article{Bertoldi1998, - title = {Mechanical {{Characterization}} of {{Parts Processed}} via {{Fused Deposition}}}, - author = {Bertoldi, M and Yardimci, M A and Pistor, C M and Guyeri, S I and Sala, G}, - year = {1998}, - journal = {In Proceedings of the 1998 Solid Freeform Fabrication Symposium}, - pages = {557--566}, - file = {/Users/fabio/Zotero/storage/NXYBTTBM/Bertoldi et al. - 1998 - Mechanical Characterization of Parts Processed via Fused Deposition.pdf} -} - -@article{bertolinoDesigning3DPrintable2021, - title = {Designing {{3D}} Printable Polypropylene: {{Material}} and Process Optimisation through Rheology}, - author = {Bertolino, M. and Battegazzore, D. and Arrigo, R. and Frache, A.}, - year = {2021}, - month = apr, - journal = {Additive Manufacturing}, - volume = {40}, - pages = {101944}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.101944}, - urldate = {2021-03-14} -} - -@inproceedings{Bertrand2019, - title = {A Solution for Multi Component, Laminated and Dirty Mixed Waste Plastics (Surface-Flash-Cracking)}, - booktitle = {Proceedings of the {{Air}} and {{Waste Management Association}}'s {{Annual Conference}} and {{Exhibition}}, {{AWMA}}}, - author = {Bertrand, Louis}, - year = {2019}, - volume = {2019-June}, - publisher = {{Air and Waste Management Association}}, - issn = {10526102}, - urldate = {2020-04-08}, - abstract = {Plastics have been a necessary evil in our society for many years. Due to their strength, flexibility and low density, they provide huge savings in material and transport costs for suppliers of consumer products. For many applications, they are irreplaceable and their use has become the norm. In the past, we have relied on China but, in 2018, China has requested that plastics be over 99\% pure, as would be necessary for individual polymers to be recycled or reused effectively. With mixed waste plastics and the new categories of multi-component and laminated plastics, it makes recycling extremely difficult, costing more to the environment than making plastics from gas or crude. The last option, which is landfilling, is a waste of valuable fossil fuels and precious resources. Moreover, landfills, which are paid on the weight of materials, see their bottom-line adversely affected by plastic's low weight and long degradation times (100+ years). Enter, Surface-Flash-Cracking (SFC). Proven in the oil industry, SFC is ultrafast pyrolysis and, contrary to ``slow'' pyrolysis and gasification, is an order of magnitude more efficient and capable of producing high-quality ultra-low sulfur diesel (ULSD) from even the most problematic waste plastics with high profitability and low environmental cost. For the same fuel, SFC emits 5 times less GHGs than crude refineries. SFC treats plastics by projecting small droplets onto very hot surfaces. They react almost instantly and produce vapors which are quickly swept out of the reactor. Each drop absorbs only the amount of energy needed to crack, preventing over-cracking and producing right-sized hydrocarbons which can be sorted with a distillation column into pure marketable fuels. Contrary to other plastic pyrolysis reactors, SFC optimizes solid-vapor separation and minimizes fouling of equipment. The technology is profitable and environmentally friendly, even at small scales. Operational costs are low and the value added to the plastics is much higher than by cleaning and sorting of solids polymers. Units are highly automated and get their energy from less than 10\% of the energy in the plastics. The rest becomes useful products, mostly high quality ULSD. Although bigger units would exponentially increase profits and efficiency, we believe small units are more environmentally friendly, as it greatly reduces GHGs associated with the inefficient transportation of light materials (plastics). The plastic China crisis is not a problem, but an opportunity to innovate and invest in new technologies such as SFC.} -} - -@article{Besiou2012, - title = {Official Recycling and Scavengers: {{Symbiotic}} or Conflicting?}, - author = {Besiou, Maria and Georgiadis, Patroklos and Van Wassenhove, Luk N.}, - year = {2012}, - month = apr, - journal = {European Journal of Operational Research}, - volume = {218}, - number = {2}, - pages = {563--576}, - issn = {03772217}, - doi = {10.1016/j.ejor.2011.11.030} -} - -@article{Bessonova2019, - title = {How the Innovation-Competition Link Is Shaped by Technology Distance in a High-Barrier Catch-up Economy}, - author = {Bessonova, Evguenia and Gonchar, Ksenia}, - year = {2019}, - month = aug, - journal = {Technovation}, - volume = {86--87}, - pages = {15--32}, - publisher = {{Elsevier Ltd}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2019.01.002}, - urldate = {2020-05-21}, - abstract = {The paper studies the effects of competition on innovation in various technology groups of mature Russian manufacturing firms. The purpose of the research is to establish whether more intense competition is good or bad for innovation, and to learn how the response to competition varies between technology leaders, followers and laggards. The study uses the 2014 survey data, which includes 1920 manufacturing firms from 19 sectors and size groups between 10 and 10,000 employees. The finding is that commitment to product innovation increases with competition at a modest level of competitive pressure, especially if foreign entry and import are considered. However, this result is mostly driven by technologically weak plants, which innovate less than leaders and followers at a low level of competition, but are encouraged to innovate more by a modest increase of competitive pressure, when theoretically predicted optimal behavior would be to refrain from innovation. When competition is strong, plants in all technology groups give up the innovation race. Competition is less influential in explaining process (as opposed to product) innovation, and the findings demonstrate a clear inverted U-shaped link: laggards and leaders are more likely to upgrade process technologies when weak competition increases slightly, and are less likely to do so when strong competition becomes stronger.}, - keywords = {Competitive pressure,Distance to the technology frontier,Manufacturing industry,Product and process innovation} -} - -@article{Betz2019, - title = {Surveying the Future of Science, Technology and Business \textendash{} {{A}} 35 Year Perspective}, - author = {Betz, Ulrich A.K. and Betz, Frederick and Kim, Rachel and Monks, Brendan and Phillips, Fred}, - year = {2019}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {144}, - pages = {137--147}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.04.005}, - urldate = {2020-05-10}, - abstract = {We asked readers of Science, Nature and Harvard Business Review about their expectations for advances in science, technology, and business over a 35-year time horizon. We asked further about their needs and dreams for technical products, and their forecasts of converging industries. A fourth survey, fielded later to experts in technology forecasting and science policy, yielded assessments of the earlier survey results as well as the experts' own views on the advances, needs, and convergence questions. A combined analysis of the four surveys leads to this paper's portrait of the expected scientific and business environments 35 years hence, and a description of the gaps between expected developments in science, technology and business on the one hand, and market and social needs on the other hand. Years between 2018 and 2053 will bring significant benefits from the convergence of biomedicine and computer science. They will bring challenges and changes to the agriculture and education sectors. Surveyed experts believe many of the areas of greatest social need, including dealing with climate change, are those that businesses are least prepared to respond to.}, - keywords = {Business futures,Foresight,Innovation,Planning,Science,technology and society} -} - -@article{betzGameChangersScience2023, - title = {Game Changers in Science and Technology - Now and Beyond}, - author = {Betz, Ulrich A. K. and Arora, Loukik and Assal, Reem A. and Azevedo, Hatylas and Baldwin, Jeremy and Becker, Michael S. and Bostock, Stefan and Cheng, Vinton and Egle, Tobias and Ferrari, Nicola and {Schneider-Futschik}, Elena K. and Gerhardy, Stefan and Hammes, Alexandra and Harzheim, Achim and Herget, Thomas and Jauset, Cristina and Kretschmer, Simon and Lammie, Corey and Kloss, Nina and Fernandes, Steve Marquis and Mitrofan, Claudia-Gabriela and Myrgorodska, Iuliia and Nedbalek, Daniela and Neumann, Siegfried G. and Paffenholz, Stella and Ponce, Laia Pascual and Rogell, Birgit and Savic, Dragana and Velikova, Gergana and Schumacher, Christian and Weisshaar, Nina and Yahya, Mohammadzadeh and Yang, Joshua Y. C. and Zhao, Guoping}, - year = {2023}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {193}, - pages = {122588}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122588}, - urldate = {2023-05-11}, - abstract = {The recent devastating pandemic has drastically reminded humanity of the importance of constant scientific and technological progress. A strong interdisciplinary dialogue between academic and industrial scientists of various specialties, entrepreneurs, managers and the public is paramount in triggering new breakthrough ideas which often emerge at the interface of disciplines. The following sections, compiled by a highly diverse group of authors, are summarizing recently achieved game-changing leaps in science and technology. The game-changers range from paradigm shifts in scientific theories to make impact over several decades to game-changers that have the potential to change our everyday lives tomorrow. The paper is an interdisciplinary dialogue of relevance for academic interdisciplinary thinkers, large corporations' strategic planners, and top executives alike; it provides a glimpse into what further breakthroughs the future may hold and thereby intends to spark new ideas with its readers.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/QV5B87ZI/Betz et al. - 2023 - Game changers in science and technology - now and .pdf;/Users/fabio/Zotero/storage/LUNSJ9AU/S0040162523002731.html} -} - -@article{bevanAmbiguitiesUncertaintyReview2022, - title = {The Ambiguities of Uncertainty: {{A}} Review of Uncertainty Frameworks Relevant to the Assessment of Environmental Change}, - author = {Bevan, Luke D.}, - year = {2022}, - month = mar, - journal = {Futures}, - volume = {137}, - pages = {102919}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2022.102919}, - urldate = {2022-03-13}, - abstract = {As awareness of deep uncertainties in many disciplines has grown over the last half-century, researchers have developed many frameworks, typologies, and taxonomies to understand, analyse, and communicate them. Uncertainty analysis is critically important in fields of study that deal with large, complex, societally-coupled problems, such as those dealing with environmental change. However, as of yet, no wide-ranging review exists that systematically compares the features of these frameworks. This paper surveys a very large number of uncertainty frameworks (N = 156) relevant to the assessment of environmental change, identifying their key features and highlighting the conceptual foundations of these frameworks. It shows that although many authors have employed very similar methods of classification, significant ambiguities may exist because of overlapping concepts or polysemous terminology. Further to this, philosophical inconsistencies are pervasive in the frameworks. This paper argues that the synthesis of these frameworks into one with general applicability is likely unachievable, and given the ambiguity of the meaning of much of the uncertainty lexicon, a more fruitful approach would be to start by examining the conceptual understandings of practitioners themselves.} -} - -@article{Bevis1982, - title = {Secondary Recycling of Plastics}, - author = {Bevis, M.}, - year = {1982}, - journal = {Materials and Design}, - volume = {3}, - number = {1}, - pages = {344--349}, - issn = {02613069}, - doi = {10.1016/0261-3069(82)90096-6}, - abstract = {Increasing environmental pressures may result in the establishment of a secondary plastics recycling industry. This paper reviews the present position and describes principal routes for secondary recycling of plastics which are likely to be in use in future. ?? 1982.}, - file = {/Users/fabio/Zotero/storage/ZWD2BHAT/Secondary recycling of plastics.pdf} -} - -@article{Beylot2019, - title = {Assessing the Environmental Impacts of {{EU}} Consumption at Macro-Scale}, - author = {Beylot, Antoine and Secchi, Michela and Cerutti, Alessandro and Merciai, Stefano and Schmidt, Jannick and Sala, Serenella}, - year = {2019}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {216}, - pages = {382--393}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.01.134}, - urldate = {2020-05-21}, - abstract = {Sustainable Consumption and Production is one of the leading principle towards reducing environmental impacts globally. This study aims at combining Environmentally-Extended Input-Output Analysis (using EXIOBASE 3) with up-to-date impact assessment models to quantify the environmental impacts induced by final consumption in the EU Member States in 2011. The environmental extensions are characterized in 14 environmental impact categories out of the 16 used in the Environmental Footprint life cycle impact assessment method. A contribution analysis of key products and services as well as emissions and resources, which drive the environmental impacts of EU consumption, is conducted. Environmental impacts are mainly induced along the supply-chain of products and services. Several expenditures relative to services represent large shares both in the total final consumption and in the 14 impacts under study, despite a relatively low impact intensity. Food products, in particular meat and dairy products, are identified as key contributors regarding acidification, eutrophication, land use, and water use, and to a lower extent climate change. Finally, several manufactured products, raw materials and basic products respectively importantly contribute to impacts on human toxicity, freshwater ecotoxicity and resource uses. The total volume of final consumption expenditures per EU Member State appears a key explanatory variable to most of the impacts embodied in their consumption, yet to a lower extent regarding water use and fossils resource use. Finally, the current limitations in using EXIOBASE 3 for environmental impact assessment are discussed, with specific attention to EXIOBASE environmental extensions and to the case study on EU consumption. Since the classification of emissions and resources for impact assessment requires a number of assumptions that may influence the results, a sensitivity analysis is performed to exemplify some of the key issues relative to the characterization of impacts based on EXIOBASE environmental extensions.}, - keywords = {Consumption,EXIOBASE 3,Impact assessment,Input-output analysis,LCIA}, - file = {/Users/fabio/Zotero/storage/8ZR6SY3Q/full-text.pdf} -} - -@article{bhagiaCriticalReviewFDM2021, - title = {Critical Review of {{FDM 3D}} Printing of {{PLA}} Biocomposites Filled with Biomass Resources, Characterization, Biodegradability, Upcycling and Opportunities for Biorefineries}, - author = {Bhagia, Samarthya and Bornani, Kamlesh and Agarwal, Ruchi and Satlewal, Alok and {\v D}urkovi{\v c}, Jaroslav and Laga{\v n}a, Rastislav and Bhagia, Meher and Yoo, Chang Geun and Zhao, Xianhui and Kunc, Vlastimil and Pu, Yunqiao and Ozcan, Soydan and Ragauskas, Arthur J.}, - year = {2021}, - month = sep, - journal = {Applied Materials Today}, - volume = {24}, - pages = {101078}, - publisher = {{Elsevier}}, - issn = {23529407}, - doi = {10.1016/j.apmt.2021.101078}, - urldate = {2021-06-11}, - file = {/Users/fabio/Zotero/storage/Y9CPADS8/full-text.pdf} -} - -@book{Bhatia2017, - title = {{{3D Printing}} and {{Bio-Based Materials}} in {{Global Health}}}, - author = {Bhatia, Sujata K. and Ramadurai, Krish W.}, - year = {2017}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-319-58277-1}, - urldate = {2020-12-03}, - isbn = {978-3-319-58276-4}, - file = {/Users/fabio/Zotero/storage/NH789IMJ/full-text.pdf} -} - -@article{Bhatt2020, - title = {Expanding Capabilities of Additive Manufacturing through Use of Robotics Technologies: {{A}} Survey}, - author = {Bhatt, Prahar M. and Malhan, Rishi K. and Shembekar, Aniruddha V. and Yoon, Yeo Jung and Gupta, Satyandra K.}, - year = {2020}, - month = jan, - journal = {Additive Manufacturing}, - volume = {31}, - pages = {100933}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100933} -} - -@article{Bhatt2020a, - title = {Sustainable Manufacturing. {{Bibliometrics}} and Content Analysis}, - author = {Bhatt, Yogesh and Ghuman, Karminder and Dhir, Amandeep}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {260}, - pages = {120988}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120988}, - urldate = {2020-03-23}, - abstract = {Businesses have practiced and examined lean and green manufacturing principles for the last 25 years, but the sustainability challenges that we face today are still significantly potent. This context creates a need to critically examine the research and practice in this domain to determine the gaps and propose solutions. To achieve that, we applied a two-tier analysis constituting bibliometric and content analyses for developing the intellectual structure of sustainable manufacturing (SM) literature. The study also produced a comprehensive framework to provide a granular understanding of SM literature. The framework demonstrates different paradigms of SM literature as well as the conceptual and methodological advancement of the research frontiers in the domain. The outcomes of the research comprise implications for researchers, managers, and policymakers. The study concludes that most empirical work focuses on the relationship of lean and green practices with organizational and environmental performance, but the role and criticality of sustainability are significantly underrepresented in SM literature. Based on our findings, we call for the integration of sustainability principles, that is, sustainable development goals (SDGs), circular economy, life cycle engineering, and corporate sustainability assessment with SM research.}, - keywords = {Bibliometric analysis,Content analysis,Environmental management practices,Green supply chain management (GrSCM),Sustainability,Sustainable manufacturing (SM)}, - file = {/Users/fabio/Zotero/storage/HTJBFS6D/full-text.pdf} -} - -@article{Bhattacharya2019, - title = {Lean-Green Integration and Its Impact on Sustainability Performance: {{A}} Critical Review}, - author = {Bhattacharya, Ananya and Nand, Alka and Castka, Pavel}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117697}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117697} -} - -@article{Bianchi2020, - title = {Monitoring Domestic Material Consumption at Lower Territorial Levels: {{A}} Novel Data Downscaling Method}, - author = {Bianchi, Marco and Tapia, Carlos and {del Valle}, Ikerne}, - year = {2020}, - month = oct, - journal = {Journal of Industrial Ecology}, - volume = {24}, - number = {5}, - pages = {1074--1087}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {15309290}, - doi = {10.1111/jiec.13000}, - urldate = {2022-02-22}, - abstract = {The availability of harmonized and granular information is critical for the design of place-sensitive policies toward more sustainable economies. However, accessibility to disaggregated data at subnational levels remains an exception in many geographies and policy domains. In this article, we develop a novel three-stage\textemdash specification, optimization, extrapolation (SOE)\textemdash econometric approach to infer harmonized regional level estimates from broadly available socioeconomic data. The approach is tested by estimating domestic material consumption (DMC) in more than 280 European regions (at NUTS 2 level). Unlike previous methods based on similar econometric techniques, our method makes explicit the socio-metabolic profiles of subnational territories by estimating and applying country-specific elasticities. Our DMC estimates are consistent with those obtained by ad hoc material flow studies that could be accessed for a sample of regions. The SOE method presented in this paper provides decision-makers with a powerful tool to explore socio-metabolic profiles at subnational level and therefore to understand the potential effects of policies aimed at supporting circular economy transitions at such levels. The method can also be adapted with relative ease to support policy designs in other policy areas challenged by severe data scarcity.}, - keywords = {circular economy,domestic material consumption (DMC),economy-wide material flow analysis (EW-MFA),industrial ecology,regional MFA,social metabolism}, - file = {/Users/fabio/Zotero/storage/ZYUX4E5E/full-text.pdf} -} - -@article{biancoLifeCycleAssessment2021, - title = {Life {{Cycle Assessment}} ({{LCA}})-Based Tools for the Eco-Design of Wooden Furniture}, - author = {Bianco, Isabella and Thi{\'e}bat, Francesca and Carbonaro, Corrado and Pagliolico, Simonetta and Blengini, Gian Andrea and Comino, Elena}, - year = {2021}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {324}, - pages = {129249}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129249}, - urldate = {2021-11-02}, - abstract = {The European furniture sector is dynamic and competitive, currently facing a transition to further increase the environmental sustainability and circularity of its products. Literature on this topic is relatively abundant and authors converge in the identification of the main sustainability criteria. Nevertheless, defining which sustainability criteria should be prioritized is still open to question. This is due to the high number of variables in the life cycle of furniture and also the specific characteristics of each piece of furniture. In this context, this paper has developed a Life Cycle Assessment (LCA)-based tool that considers the main materials and processes typically used in the furniture sector. The tool is provided both as a model to be imported in an LCA software (for use by LCA-experts) and as a spreadsheet document (for use by non LCA-experts or for quick analyses). Both of these versions of the tool contain editable parameters that allow the model to be adapted to specific pieces of furniture. In addition, both versions have been tested using the case study of a wooden armchair conceived and produced by an Italian architectural and design firm. The tool has made it possible to quantify the environmental impacts of the armchair and the evaluation of four possible scenarios to enhance its environmental sustainability. This work can therefore guide the actors in furniture value chains as to the choice of the criteria able to maximise the furniture sustainability throughout its life cycle.}, - keywords = {Armchair case study,Environmental assessment,LCA,Sustainable design,Wooden furniture} -} - -@article{bickleyQuantumsapiensQuantumBases2021, - title = {Quantum-Sapiens: The Quantum Bases for Human Expertise, Knowledge, and Problem-Solving}, - author = {Bickley, Steve J. and Chan, Ho Fai and Schmidt, Sascha L. and Torgler, Benno}, - year = {2021}, - month = may, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--13}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1921137}, - urldate = {2021-05-10}, - abstract = {Despite the great promises and potential of quantum computing, the full range of possibilities and practical applications is not yet clear. In this contribution, we highlight the potential for quan...}, - keywords = {expert systems,knowledge,Problem-Solving,Quantum} -} - -@article{Biermann2020, - title = {The Boundaries of the Planetary Boundary Framework: {{A}} Critical Appraisal of Approaches to Define a "Safe Operating Space" for Humanity}, - author = {Biermann, Frank and Kim, Rakhyun E.}, - year = {2020}, - month = oct, - journal = {Annual Review of Environment and Resources}, - volume = {45}, - number = {1}, - pages = {497--521}, - publisher = {{Annual Reviews}}, - issn = {15435938}, - doi = {10.1146/annurev-environ-012320-080337}, - urldate = {2020-10-28}, - abstract = {In 2009, a group of 29 scholars argued that we can identify a set of "planetary boundaries" that humanity must not cross at the cost of its own peril. This planetary boundaries framework has been influential in generating academic debate and in shaping research projects and policy recommendations worldwide. Yet, it has also come under heavy scrutiny and been criticized. What is today's overall significance and impact of the notion of planetary boundaries for earth system science and earth system governance? We review here the development of the concept and address several lines of criticism, from earth system science, development studies, and science and technology studies.We also examine some applications of the framework, discuss broader governance implications, and reflect on actual policy relevance. In concluding, we explore the most recent incarnation of the planetary boundaries framework in its avatar as earth system targets supported by an Earth Commission.}, - keywords = {Earth system governance,Earth system targets,Planetary boundaries,Planetary stewardship}, - file = {/Users/fabio/Zotero/storage/5YJXEE3R/full-text.pdf} -} - -@article{bigernaNewGenerationAcceptability2021, - title = {New Generation Acceptability towards Durability and Repairability of Products: {{Circular}} Economy in the Era of the 4th Industrial Revolution}, - author = {Bigerna, Simona and Micheli, Silvia and Polinori, Paolo}, - year = {2021}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {165}, - pages = {120558}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120558}, - urldate = {2021-01-01} -} - -@article{Biggs2012, - title = {Toward {{Principles}} for {{Enhancing}} the {{Resilience}} of {{Ecosystem Services}}}, - author = {Biggs, Reinette and Schl{\"u}ter, Maja and Biggs, Duan and Bohensky, Erin L. and BurnSilver, Shauna and Cundill, Georgina and Dakos, Vasilis and Daw, Tim M. and Evans, Louisa S. and Kotschy, Karen and Leitch, Anne M. and Meek, Chanda and Quinlan, Allyson and {Raudsepp-Hearne}, Ciara and Robards, Martin D. and Schoon, Michael L. and Schultz, Lisen and West, Paul C.}, - year = {2012}, - month = nov, - journal = {Annual Review of Environment and Resources}, - volume = {37}, - number = {1}, - pages = {421--448}, - publisher = {{Annual Reviews Inc.}}, - issn = {1543-5938}, - doi = {10.1146/annurev-environ-051211-123836}, - urldate = {2021-04-21}, - abstract = {Enhancing the resilience of ecosystem services (ES) that underpin human well-being is critical for meeting current and future societal needs, and requires specific governance and management policies. Using the literature, we identify seven generic policy-relevant principles for enhancing the resilience of desired ES in the face of disturbance and ongoing change in social-ecological systems (SES). These principles are (P1) maintain diversity and redundancy, (P2) manage connectivity, (P3) manage slow variables and feedbacks, (P4) foster an understanding of SES as complex adaptive systems (CAS), (P5) encourage learning and experimentation, (P6) broaden participation, and (P7) promote polycentric governance systems. We briefly define each principle, review how and when it enhances the resilience of ES, and conclude with major research gaps. In practice, the principles often co-occur and are highly interdependent. Key future needs are to better understand these interdependencies and to operationalize and apply the principles in different policy and management contexts. \textcopyright{} Copyright \textcopyright 2012 by Annual Reviews. All rights reserved.}, - keywords = {Connectivity,Diversity,Learning,Participation,Polycentric,Social-ecological}, - file = {/Users/fabio/Zotero/storage/TU9KM37F/full-text.pdf} -} - -@article{bigumMetalRecoveryHighgrade2012, - title = {Metal Recovery from High-Grade {{WEEE}}: {{A}} Life Cycle Assessment}, - author = {Bigum, Marianne and Brogaard, Line and Christensen, Thomas H}, - year = {2012}, - journal = {Journal of Hazardous Materials}, - volume = {207}, - pages = {8--14}, - doi = {10.1016/j.jhazmat.2011.10.001}, - urldate = {2021-01-04}, - abstract = {Keywords: Waste electrical and electronic equipment (WEEE) Life cycle assessment (LCA) Metal recovery EASEWASTE a b s t r a c t Based on available data in the literature the recovery of aluminium, copper, gold, iron, nickel, palladium and silver from high-grade WEEE was modeled by LCA. The pre-treatment of WEEE included manual sorting , shredding, magnetic sorting, Eddy-current sorting, air classification and optical sorting. The modeled metallurgical treatment facility included a Kaldo plant, a converter aisle, an anode refinery and a precious metal refinery. The metallurgic treatment showed significant environmental savings when credited the environmental load from avoided production of the same amount of metals by mining and refining of ore. The resource recovery per tonne of high-grade WEEE ranged from 2 g of palladium to 386 kg of iron. Quantified in terms of person-equivalents the recovery of palladium, gold, silver, nickel and copper constituted the major environmental benefit of the recovery of metals from WEEE. These benefits are most likely underestimated in the model, since we did not find adequate data to include all the burdens from mining and refining of ore; burdens that are avoided when metals are recovered from WEEE. The processes connected to the pre-treatment of WEEE were found to have little environmental effect compared to the metallurgical treatment. However only 12-26\% of silver, gold and palladium are recovered during pre-treatment, which suggest that the reduction of the apparent losses of precious metals as palladium, gold and silver during pre-treatment of WEEE is of environmental importance. Our results support in a quantitative manner that metal recovery from WEEE should be quantified with respect to the individual metals recovered and not as a bulk metal recovery rate.}, - file = {/Users/fabio/Zotero/storage/UN9NZ59B/full-text.pdf} -} - -@article{Bij2012, - title = {Open Hardware for {{CERN}}'s Accelerator Control Systems}, - author = {{van der Bij}, E and Serrano, J and Wlostowski, T and Cattin, M and Gousiou, E and Sanchez, P Alvarez and Boccardi, A and Voumard, N and Penacoba, G}, - year = {2012}, - month = jan, - journal = {Journal of Instrumentation}, - volume = {7}, - number = {01}, - pages = {C01032--C01032}, - issn = {1748-0221}, - doi = {10.1088/1748-0221/7/01/C01032} -} - -@article{bikas2016, - ids = {Bikas2016}, - title = {Additive Manufacturing Methods and Modelling Approaches: A Critical Review}, - author = {Bikas, H and Stavropoulos, P and Chryssolouris, G}, - year = {2016}, - month = mar, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {83}, - number = {1-4}, - pages = {389--405}, - issn = {0268-3768}, - doi = {10.1007/s00170-015-7576-2}, - isbn = {0268-3768}, - keywords = {additive manufacturing,Additive manufacturing,modelling methods,Modelling methods,process control,Process control,process mechanisms,Processmechanisms}, - file = {/Users/fabio/Zotero/storage/K9XTDJER/Additive manufacturing methods and modelling approaches a critical review.pdf} -} - -@article{bikasDesignFrameworkAdditive2019, - title = {A Design Framework for Additive Manufacturing}, - author = {Bikas, H. and Lianos, A. K. and Stavropoulos, P.}, - year = {2019}, - month = aug, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {103}, - number = {9-12}, - pages = {3769--3783}, - publisher = {{Springer London}}, - issn = {14333015}, - doi = {10.1007/s00170-019-03627-z}, - urldate = {2021-01-12}, - abstract = {Additive manufacturing (AM) is one of the fastest growing and most promising manufacturing technologies, offering significant advantages over conventional manufacturing processes. That is, the geometrical flexibility that leads to increased design freedom is not infinite as the numerous AM processes impose manufacturing limitations. Abiding by these manufacturability rules implies a backpropagation of AM knowledge to all design phases for a successful build. A catholic AM-driven design framework is needed to ensure full exploitation of the AM design capabilities. The current framework is based on the definition of the CAD aspects and the AM process parameters. Their dependence, affection to the resulted part, and weight on the total process determine the outcome. The AM-driven design framework prevents manufacturing issues of certain geometries, that can be effortlessly created by conventional manufacturing, and additionally exploits the full design-freedom potentials AM has to offer with a linear design flow reducing design iterations and ultimately achieving first time right AM design process.}, - keywords = {Additive manufacturing,AM design framework,Design aspects,Design considerations,Design for AM,Manufacturability}, - file = {/Users/fabio/Zotero/storage/4UEG7PXQ/full-text.pdf} -} - -@article{Bilgili2019, - title = {Characterisation of Wastes Collected from Beaches, Coastlines, Marine Surface Cleaning Processes and Ships: {{A}} Case Study of {{Istanbul}}}, - author = {Bilgili, Mehmet Sinan and Adar, Elanur and Yildiz, Senol and Sezer, Kadir}, - year = {2019}, - month = jun, - journal = {Waste Management and Research}, - volume = {37}, - number = {6}, - pages = {621--630}, - publisher = {{SAGE Publications Ltd}}, - issn = {10963669}, - doi = {10.1177/0734242X19838619}, - urldate = {2020-04-08}, - abstract = {Marine waste management is crucial for Istanbul because of the significant location for intercontinental transition, international trade, tourism, industry and shipping. This study is the first one realised in Turkey for the detailed characterisation of marine waste. The amount and characteristics of solid wastes originating from beaches, coastlines, sea surface cleaning processes and ships (both cargo and cruise ships) were determined. It was observed that marine wastes includes a significant amount of recyclable materials. Although, it was ascertained that the amount and composition of waste differs according to the collecting sources, the majority of wastes are composed of different types of plastics. The average calorific value of marine waste was determined as 2500 kcal kg-1, which is higher than that of mixed municipal solid waste. There is a lack of studies on the pathways of disposal alternatives of marine waste after collection. As landfilling is the common pathway for disposal after collecting, it is clear that recycle/reuse and energy recovery options are possible for marine waste.}, - pmid = {30973084}, - keywords = {calorific value,combustible waste,Marine waste,plastics,recyclables} -} - -@article{billahLargescaleAdditiveManufacturing2021, - title = {Large-Scale Additive Manufacturing of Self-Heating Molds}, - author = {Billah, Kazi Md Masum and Heineman, Jesse and Mhatre, Parithosh and Roschli, Alex and Post, Brian and Kumar, Vipin and Kim, Seokpum and Haye, Gregory and Jackson, Jerry and Skelton, Zach and Kunc, Vlastimil and Hassen, Ahmed Arabi}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - volume = {47}, - pages = {102282}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102282}, - urldate = {2021-09-27} -} - -@article{bimpizas-pinisEfficiencyEnoughCircular2021, - title = {Is Efficiency Enough for Circular Economy?}, - author = {{Bimpizas-Pinis}, Meletios and Bozhinovska, Emilija and Genovese, Andrea and Lowe, Benjamin and Pansera, Mario and Alberich, Josep Pinyol and Ramezankhani, Mohammad Javad}, - year = {2021}, - doi = {10.1016/j.resconrec.2021.105399}, - urldate = {2021-02-05}, - keywords = {Circular economy,Economic efficiency}, - file = {/Users/fabio/Zotero/storage/NWPS8JM9/full-text.pdf} -} - -@incollection{Binesmael2018, - title = {Open {{Innovation Laboratory}} for {{Rapid Realisation}} of {{Sensing}}, {{Smart}} and {{Sustainable Products}}: {{Motives}}, {{Concepts}} and {{Uses}} in {{Higher Education}}}, - booktitle = {Collaborative {{Networks}} of {{Cognitive Systems}}. {{PRO-VE}} 2018. {{IFIP Advances}} in {{Information}} and {{Communication Technology}},}, - author = {Molina Guti{\'e}rrez, Arturo and Miranda, Jhonattan and Chavarr{\'i}a, Dante and Noguez, Julieta and Ram{\'i}rez, Miguel and Mac{\'i}as, Manuel E. and L{\'o}pez, Edgar O. and Bustamante, Mart{\'i}n R. and Molina, Mart{\'i}n and Ponce, Pedro and Cort{\'e}s Serrano, Daniel and Ram{\'i}rez, Jos{\'e}}, - editor = {{Camarinha-Matos}, Luis M. and Afsarmanesh, Hamideh and Rezgui, Yacine}, - year = {2018}, - volume = {534}, - pages = {156--163}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-319-99127-6_14}, - abstract = {Surveillance of wildlife health in Europe remains informal and reporting wildlife diseases is not yet coordinated among countries. At a meeting in Brussels on 15 October 2009, delegates from 25 countries provided an overview of the current status of wildlife health surveillance in Europe. This showed that every year in Europe over 18,000 wild animals are examined as part of general surveillance programmes and over 50,000 wild animals are examined in the course of targeted surveillance. The participants at the Brussels meeting agreed to set up a European network for wildlife health surveillance. The goals of this network, which was established in February 2010, are to improve procedures for the rapid exchange of information, harmonise procedures for investigation and diagnosis of wildlife diseases, share relevant}, - isbn = {978-3-319-99126-9}, - keywords = {B,bim \'a industry foundation,bim cognitive system,BIM cognitive system,building information modelling \'a,classes,Collaboration,Meta-standard,meta-standard \'a collaboration \'a}, - file = {/Users/fabio/Zotero/storage/WX6R9CAX/Open Innovation Laboratory for Rapid Realisation of Sensing, Smart and Sustainable Products- Motives, Concepts and Uses in Higher Education.pdf} -} - -@article{binetruyEstimationProprietesMecaniques2014, - title = {Estimation Des Propri\'et\'es M\'ecaniques Des Polym\`eres Renforc\'es}, - author = {Binetruy, Christophe}, - year = {2014}, - volume = {33}, - number = {0}, - file = {/Users/fabio/Zotero/storage/SSJM3MWY/Binetruy - 2014 - Estimation des propriétés mécaniques des polymères renforcés.pdf} -} - -@article{Bing2014, - title = {Vehicle Routing for the Eco-Efficient Collection of Household Plastic Waste}, - author = {Bing, Xiaoyun and {de Keizer}, Marlies and {Bloemhof-Ruwaard}, Jacqueline M. and {van der Vorst}, Jack G.A.J.}, - year = {2014}, - month = apr, - journal = {Waste Management}, - volume = {34}, - number = {4}, - pages = {719--729}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2014.01.018} -} - -@article{Bing2014a, - title = {Sustainable Reverse Logistics Network Design for Household Plastic Waste}, - author = {Bing, X. and {Bloemhof-Ruwaard}, J.M. and {van der Vorst}, J.G.A.J.}, - year = {2014}, - journal = {Flexible Services and Manufacturing Journal}, - volume = {26}, - pages = {119--142}, - issn = {1936-6582}, - doi = {10.1007/s10696-012-9149-0}, - abstract = {Plastic recycling is a legal requirement and can yield environmental benefits. In the Netherlands, there is a complex network of various collection methods, separation centers, sorting centers and reprocessors. The first step of the recycling system, separating plastics from other waste, can occur within households (source-separation) or in separation centers (post-separation), making a difference in collection channel choice and technology requirements. The purpose of this paper is to provide decision support on choosing the most suitable combination of separation methods in the Netherlands. Decision support is given through optimized reverse logistics network design which makes the overall recycling system more efficient and sustainable, while taking into account the interests of various stakeholders (municipalities, households, etc.). A mixed integer linear programming (MILP) model, which minimizes both transportation cost and environmental impact, is used in this network design. The research follows the approach of scenario study; the baseline scenario is the current situation and other scenarios are designed with various strategic alternatives. Modeling is conducted by using a graphical optimi- zation tool IBM LogicNet Plus 7.1. Comparing these scenarios, the results show that the current network settings of the baseline situation is efficient in logistics terms but has a potential to adapt to strategic changes, depending on the assumptions regarding availability of the required processing facilities to treat plastic waste. In some of the tested scenarios, a separate collection channel for Polyethylene Terephthalate (PET) bottles is cost efficient and saves carbon emission. Although the figures differ depending on the separation method choices of municipalities, our modeling result of all the tested scenarios shows a saving of more than 25 \% carbon emission compared to the current network.}, - isbn = {1069601291490}, - file = {/Users/fabio/Zotero/storage/56INYJA7/Sustainable reverse logistics network design for household plastic waste.pdf} -} - -@misc{Bingham2021, - title = {Vittel as a Model Case in {{PES}} Discourse: {{Review}} and Critical Perspective}, - author = {Bingham, Logan Robert}, - year = {2021}, - month = apr, - journal = {Ecosystem Services}, - volume = {48}, - pages = {101247}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101247}, - urldate = {2021-04-21}, - abstract = {The Vittel case serves as a salient reference point in academic and policy discussions related to user-financed payments for ecosystem services (PES), but critical views are scarce. Part I introduces Vittel and outlines how discourses about model cases may shape PES theory and practice. Part II presents a review and analysis of 72 recent PES articles referencing Vittel, finding that just six mention any limitations, while 91\% rely exclusively on a single, largely favorable report. Part III revisits the broader Vittel literature to challenge the dominant framing of the scheme as ideal in terms of its process, structure, or outcomes. It emphasizes how well-resourced actors can exert non-obvious influences over the terms of negotiations and suggests potential limitations for Coasean bargaining in the presence of large power differentials between parties. The paper concludes with a call for increased scrutiny of this famous case and greater integration between the English- and French-language literatures surrounding it.}, - keywords = {Coasean bargaining,Payments for ecosystem services,Process equity,Watershed management}, - file = {/Users/fabio/Zotero/storage/GIE6SFWF/Bingham - 2021 - Vittel as a model case in PES discourse Review and critical perspective.pdf} -} - -@article{bironTPETPVDans2014, - title = {{{TPE}} et {{TPV}} Dans Les Applications}, - author = {Biron, Michel}, - year = {2014}, - volume = {33}, - number = {0}, - file = {/Users/fabio/Zotero/storage/MUH52BL3/Biron - 2014 - TPE et TPV dans les applications.pdf} -} - -@techreport{Birtchnell2013, - title = {The Impacts of {{3D Printing}} on {{Transport}} and {{Society}}}, - author = {Birtchnell, Thomas and {Urry}}, - year = {2013}, - volume = {23}, - pages = {37}, - institution = {{Lancaster University}}, - file = {/Users/fabio/Zotero/storage/ZYFEJYTX/m-api-66a01b6a-0a5e-f78d-6255-d002c82c65c1.pdf} -} - -@article{Birtchnell2013a, - title = {Fabricating {{Futures}} and the {{Movement}} of {{Objects}}}, - author = {Birtchnell, Thomas and Urry, John}, - year = {2013}, - month = sep, - journal = {Mobilities}, - volume = {8}, - number = {3}, - pages = {388--405}, - issn = {1745-0101}, - doi = {10.1080/17450101.2012.745697}, - urldate = {2014-02-02}, - abstract = {This paper assesses possible futures concerning so-called 3D printing in rela- tion to socio-technical systems and consumption and production. Drawing on an Economic and Social Research Council funded project, the paper details the results of research explor- ing possible futures of the manufacturing industry and impacts upon the transport of objects. Such `printing',or `personal fabrication', could permit many objects to be produced near to or even by consumers themselves on just-in-time `printing' machines. Widely known about in engineering and design, the impacts of these technologies on social practices and transport have yet to be much examined by social science. These technologies may become as ubiqui- tous as networked computers, with consequences just as significant. The paper reports on this recent research that seeks to understand some economic, social and environmental implications of what may be a major new socio-technical system currently in the making and which might have major consequences for the trajectory of the twenty-first century}, - keywords = {3D printing,additive manufacturing,mobilities,rapid manufacturing,systems,transport}, - file = {/Users/fabio/Zotero/storage/F9QMAC9V/Birtchnell, Urry - 2013 - Fabricating Futures and the Movement of Objects.pdf} -} - -@article{Birtchnell2013b, - title = {{{3D}}, {{SF}} and the Future}, - author = {Birtchnell, Thomas and Urry, John}, - year = {2013}, - month = jun, - journal = {Futures}, - volume = {50}, - pages = {25--34}, - issn = {00163287}, - doi = {10.1016/j.futures.2013.03.005}, - abstract = {This article assesses the use of 'science fiction' (SF) in visioning or prototyping the potential economic and social consequences of so-called 3D printing. What is becoming clear to many commentators as well as science fiction writers is how rapid prototyping, or 3D printing more generally, could permit many final objects to be made near to or even by consumers on just-in-time 'printing' machines. This revolution in making would have many implications for the economy-and-society in the future by seriously augmenting, or possibly replacing, current systems of manufactured production, long-distance transportation and consumption. These 3D technologies have featured in SF works, including Neal Stephenson's The Diamond Age, Ian McDonald's Brasyl, Charles Stross's Rule 34 and Cory Doctorow's Makers. The article reports on current research seeking to understand the implications of what may be a major new sociotechnical system in the making. Some creative uses of SF are presented in a professional workshop setting. As well the article documents the use of SF as a methodological prototype in forecasting alternative scenarios of the future. SF prototyping could be a powerful tool in the social science repertoire when put into action in forecasting possible technology and business futures. ?? 2013 Elsevier Ltd.}, - isbn = {0016-3287}, - file = {/Users/fabio/Zotero/storage/QI4KTBUJ/Birtchnell, Urry - 2013 - 3D, SF and the future.pdf} -} - -@article{birtchnellDigitalSwadeshi3D2020, - title = {Digital {{Swadeshi}} and {{3D Printing Intellectual Property}} in {{India}}: {{The Multi-Level Perspective}}, {{Causal Layered Analysis}} and {{Backcasting}}}, - author = {Birtchnell, Thomas and Daly, Angela and Heemsbergen, Luke}, - year = {2020}, - month = jun, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102596}, - urldate = {2020-06-18} -} - -@article{Bishop2021, - title = {Environmental Performance Comparison of Bioplastics and Petrochemical Plastics: {{A}} Review of Life Cycle Assessment ({{LCA}}) Methodological Decisions}, - author = {Bishop, George and Styles, David and Lens, Piet N.L.}, - year = {2021}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {168}, - pages = {105451}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105451}, - urldate = {2021-02-14}, - abstract = {There is currently a shift from petrochemical to bio-based plastics (bioplastics). The application of comprehensive and appropriately designed LCA studies are imperative to provide clear evidence on the comparative sustainability of bioplastics. This review explores the growing collective of LCA studies that compare the environmental footprints of specific bioplastics against those of petrochemical plastics. 44 relevant studies published between 2011 and 2020 were reviewed to explore important methodological choices regarding impact category selection, inventory completeness (e.g. inclusion of additives), boundary definition (e.g. inclusion of land-use change impacts), representation of biogenic carbon, choice of end-of-life scenarios, type of LCA, and the application of uncertainty analysis. Good practice examples facilitated identification of common gaps and weaknesses in LCA studies applied to benchmark bioplastics against petrochemical plastics. Many studies did not provide a holistic picture of the environmental impacts of bioplastic products, thereby potentially supporting misleading conclusions. For comprehensive evaluation of bioplastic sustainability, we recommend that LCA practitioners: embrace more detailed and transparent reporting of LCI data within plastic LCA studies; adopt a comprehensive impact assessment methodology pertaining to all priority environmental challenges; incorporate multiple plastic use cycles within functional unit definition and system boundaries where plastics can be recycled; include additives in life cycle inventories unless there is clear evidence that they contribute {$<$}1\% to all impact categories; apply biogenic carbon storage credits only to long-term carbon sinks; account for (indirect) land-use change arising from feedstock cultivation; prospectively consider realistic scenarios of deployment and end-of-life, preferably within a consequential LCA framework.}, - keywords = {Bio-based plastic,Bioeconomy,Bioplastic,Circular economy,Environmental impacts,Life cycle assessment (LCA)}, - file = {/Users/fabio/Zotero/storage/TWXQ7Q3X/full-text.pdf} -} - -@article{biswasIntroducingASustainableDevelopment2021, - title = {Introducing ``{$\alpha$}-{{Sustainable Development}}'' for Transforming Our World: {{A}} Proposal for the 2030 Agenda}, - author = {Biswas, Siddhartha Sankar and Ahad, Mohd Abdul and Nafis, Md Tabrez and Alam, M. Afshar and Biswas, Ranjit}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {321}, - pages = {129030}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129030}, - urldate = {2021-09-21} -} - -@article{Bithas2011, - title = {Sustainability and Externalities: {{Is}} the Internalization of Externalities a Sufficient Condition for Sustainability?}, - author = {Bithas, Kostas}, - year = {2011}, - month = aug, - journal = {Ecological Economics}, - volume = {70}, - number = {10}, - pages = {1703--1706}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2011.05.014}, - urldate = {2020-05-24}, - abstract = {In an important contribution in Ecological Economics, van de Bergh (2010) correctly concludes that sustainability does not imply zero externalities. However, he continues with the Delphic statement "(Delphic statements were uttered by the renowned oracle of ancient Greece at Delphi. They were phrased in such a way as to be self-fulfilling because alternative interpretations covered every possibility.)" "Without externalities the problem of sustainability vanishes". If this statement refers to an impossible economic process that produces no externalities then he is right. However, it might be interpreted as stating that whenever environmental policy internalizes environmental externalities then sustainability will be ensured. In this note, I assert that in the real world where externalities prevail, their internalization or neutralization in the traditional way cannot lead to sustainability. Only if internalization takes a very specific form that results in the inviolable preservation of environmental rights of future generations in pure biological terms can sustainability be ensured. After revised the original commentary I resubmit it. The issues raised by the editor have been carefully considered. \textcopyright{} 2011 Elsevier B.V.}, - keywords = {Economic instruments,Environmental externalities,Environmental rights,Non-renewable resources,Sustainable development} -} - -@article{Bithas2013, - title = {Re-Estimating the Decoupling Effect: {{Is}} There an Actual Transition towards a Less Energy-Intensive Economy?}, - author = {Bithas, K. and Kalimeris, P.}, - year = {2013}, - journal = {Energy}, - volume = {51}, - pages = {78--84}, - publisher = {{Elsevier Ltd}}, - issn = {03605442}, - doi = {10.1016/j.energy.2012.11.033}, - urldate = {2020-05-21}, - abstract = {The historical issue of natural resources scarcity is revived currently through the empirical investigation into the dependence of modern economy on the inputs of material and energy. The contemporary debate on de-growth and a-growth feeds on the empirical assessments of the relationship between energy-material use and current growth trends. In this context, the present study attempts a re-estimation of the energy-economic growth decoupling effect taking into account the physiology and, hence, the dimensionality that economic goods have. The Energy/GDP per Capita ratio is proposed as an indicator that approximates better than the Energy/GDP ratio the real world properties of production and, therefore, its energy requirements. The resulting estimations of decoupling effect are less "optimistic" than those based on Energy/GDP ratio and prevalent in the relevant contemporary literature. \textcopyright{} 2012 Elsevier Ltd.}, - keywords = {Decoupling effect,E/GDP per Capita ratio,E/GDP ratio,Economic growth,Energy scarcity,Natural resources scarcity} -} - -@article{bjornbetCircularEconomyManufacturing2021, - title = {Circular Economy in Manufacturing Companies: {{A}} Review of Case Study Literature}, - author = {Bj{\o}rnbet, Marit Moe and Skaar, Christofer and Fet, Annik Magerholm and Schulte, Kjersti {\O}verb{\o}}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {294}, - pages = {126268}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126268}, - urldate = {2021-02-14}, - file = {/Users/fabio/Zotero/storage/V2CWALY7/full-text.pdf} -} - -@article{Blakey2015, - title = {The {{Impact}} of {{Workspace}} on {{Innovation A Dissertation}} By}, - author = {Blakey, Jennifer D and Ryder, Marilou and Shean, Andrew}, - year = {2015}, - number = {March} -} - -@article{Bleck2012, - title = {Waste Collection in Developing Countries - {{Tackling}} Occupational Safety and Health Hazards at Their Source}, - author = {Bleck, Daniela and Wettberg, Wieland}, - year = {2012}, - journal = {Waste Management}, - volume = {32}, - number = {11}, - pages = {2009--2017}, - publisher = {{Elsevier Ltd}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2012.03.025}, - abstract = {Waste management procedures in developing countries are associated with occupational safety and health risks. Gastro-intestinal infections, respiratory and skin diseases as well as muscular-skeletal problems and cutting injuries are commonly found among waste workers around the globe. In order to find efficient, sustainable solutions to reduce occupational risks of waste workers, a methodological risk assessment has to be performed and counteractive measures have to be developed according to an internationally acknowledged hierarchy. From a case study in Addis Ababa, Ethiopia suggestions for the transferral of collected household waste into roadside containers are given. With construction of ramps to dump collected household waste straight into roadside containers and an adaptation of pushcarts and collection procedures, the risk is tackled at the source. \textcopyright{} 2012 Elsevier Ltd.}, - keywords = {Addis Ababa,Exposure to dust,Heavy loads,Occupational risks,Waste collection,Waste transfer}, - file = {/Users/fabio/Zotero/storage/BPLNZRGU/Waste collection in developing countries – Tackling occupational safety and health hazards at their source.pdf} -} - -@article{Bleicher2020, - title = {Why Are Recycled Waste Materials Used Reluctantly?\textemdash{{Enriching}} Research in Recycling with Social Scientific Perspectives}, - author = {Bleicher, Alena}, - year = {2020}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {152}, - pages = {104543}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104543} -} - -@article{Bloch2019, - title = {How {{Art Places Climate Change}} at the {{Heart}} of {{Technological Innovation}}}, - author = {{Bloch} and {Verch\`ere}}, - year = {2019}, - month = nov, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {4}, - pages = {93}, - issn = {2199-8531}, - doi = {10.3390/joitmc5040093}, - abstract = {How can we place climate change issues at the heart of technological innovation? From our point of view, artistic practice is a powerful tool to infuse sustainability dimensions into technological developments. By using a sensitive approach based on a dialogue with his/her inner self, the artist questions the nature and meaning of technological developments and therefore appeals to users' deep motivations. We explore first how the artist inner self engagement in the creation process relates to climate change mitigation. Then, through a qualitative survey-type experimentation derived from Jeanne Bloch's art-tech installation, we expose how the confrontation with a panel of users helps to understand the characteristics of the dialogue an artist engages in with an ``immersed'' audience, particularly on the issue of climate change.} -} - -@article{Blomsma2017, - title = {The {{Emergence}} of {{Circular Economy}}: {{A New Framing Around Prolonging Resource Productivity}}}, - author = {Blomsma, Fenna and Brennan, Geraldine}, - year = {2017}, - journal = {Journal of Industrial Ecology}, - volume = {21}, - number = {3}, - pages = {603--614}, - issn = {15309290}, - doi = {10.1111/jiec.12603}, - abstract = {In this article, we use Hirsch and Levin's notion of umbrella concepts as an analytical lens, in order to articulate the valuable catalytic function the circular economy (CE) concept could perform in the waste and resource management debate. We realize this goal by anchoring the CE concept in this broader debate through a narrative approach. This leads to the insight that whereas the various resource strategies grouped under the CE's banner are not new individually, the concept offers a new framing of these strategies by drawing attention to their capacity of prolonging resource use as well as to the relationship between these strategies. As such, the CE offers a new perspective on waste and resource management and provides a new cognitive unit and discursive space for debate. We conclude by discussing research opportunities for the industrial ecology (IE) community relating to the concept's theoretical development and its implementation. Specifically, we pose that reinvigorating and growing the social science aspects of IE is required for both. After all, it is in understanding and facilitating the collective implementation of any idea, also the CE concept, that the potential lies for shaping our material future.}, - isbn = {1088-1980}, - keywords = {closed loop,industrial ecology,resource efficiency,resource-life extending strategies,social embeddedness,umbrella concepts}, - file = {/Users/fabio/Zotero/storage/CHGZ73JX/The Emergence of Circular Economy A New Framing Around Prolonging Resource Productivity.pdf} -} - -@article{Blomsma2018, - title = {Collective `Action Recipes' in a Circular Economy \textendash{} {{On}} Waste and Resource Management Frameworks and Their Role in Collective Change}, - author = {Blomsma, Fenna}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {199}, - pages = {969--982}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.07.145}, - abstract = {This paper shows how to constructively engage with waste and resource management frameworks, by clarifying their role in the societal discourse on waste and resources, providing insight into their step-based structure, and how they draw on different definitions of `waste' and `resource.' Through use of the concepts of `frame,' `collective action frame' and `logics,' a language and conceptual toolbox is made available that facilitates a constructive debate around such frameworks. Ten waste and resource management frameworks are included here, among which are the five frameworks that are part of the synthesis of the Ellen MacArthur Foundation's Circular Economy framework: Cradle-to-Cradle\texttrademark{} by Braungart and McDonough, the Performance Economy by Walter Stahel, the Blue Economy by Gunter Pauli, Regenerative Design by John Lyle and the Industrial Symbiosis framework. A case is made for the careful consideration, creation, use and further development of such frameworks and directions are provided for the further development of the CE concept into a robust concept.}, - pmid = {2014349883}, - keywords = {Circular economy,Circular strategies,Closed-loop,Collective action frame,Resource productivity,Societal change,Waste}, - file = {/Users/fabio/Zotero/storage/R6YVQ7J3/Collective ‘action recipes’ in a circular economy – On waste and resource management frameworks and their role in collective change.pdf} -} - -@article{Blomsma2020, - title = {Circular Economy: {{Preserving}} Materials or Products? {{Introducing}} the {{Resource States}} Framework}, - author = {Blomsma, Fenna and Tennant, Mike}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {156}, - pages = {104698}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104698} -} - -@unpublished{Bloom2015, - title = {Innovation Spaces: {{Transforming}} Humanitarian Practice in the {{United Nations}}}, - author = {Bloom, Louise and Faulkner, Romy}, - year = {2015}, - month = mar, - series = {Working Paper Series}, - pages = {1--34}, - publisher = {{University of Oxford}}, - abstract = {This research seeks to understand the way in which innovation labs across several UN agencies are being used to foster new ways of operating within the UN's bureaucratic structures. We ask three key questions to help unpack how innovation labs are taking shape and to inform lessons for future labs about what works and what does not, in trying to achieve a culture of innovation and improved humanitarian solutions. These questions are: What form do innovation labs in UN agencies take? What motivated their initiation? What are their aims and objectives? What impact have they had and how is the impact being measured?} -} - -@article{Bloom2016, - title = {Innovation Spaces: Lessons from the {{United Nations}}}, - author = {Bloom, Louise and Faulkner, Romily}, - year = {2016}, - month = aug, - journal = {Third World Quarterly}, - volume = {37}, - number = {8}, - pages = {1371--1387}, - publisher = {{Routledge}}, - issn = {13602241}, - doi = {10.1080/01436597.2015.1135730}, - abstract = {AbstractThis paper explores the notion of `innovation spaces' within the UN system, as physical and virtual laboratories for innovation. Using empirical research in a range of innovation labs the authors explore four key questions: what form UN innovation labs have taken, what has motivated their creation, what their aims and objectives are, and what impact they are having. The answers to these questions promote reflection on the future of innovation spaces, particularly an analysis of whether a model of `siloed' innovation spaces will survive in the humanitarian system. The paper demonstrates the important role that innovation labs play in the UN system, as well as grappling with the challenges they face.}, - isbn = {0000000191}, - mendeley-tags = {Culture,Innovation Space,Innovation laboratory,Outcomes \& Impacts,Social}, - keywords = {Culture,foreign policy,governance,humanitarianism,Innovation laboratory,Innovation Space,Outcomes \& Impacts,Social,technology transfer,United Nations}, - file = {/Users/fabio/Zotero/storage/SAW2XP5F/Bloom_Faulkner_2016_Innovation spaces.pdf} -} - -@article{blosch-paidoshIndustrialEvaluationDesign2022, - title = {Industrial Evaluation of Design Heuristics for Additive Manufacturing}, - author = {{Bl{\"o}sch-Paidosh}, Alexandra and Shea, Kristina}, - year = {2022}, - month = apr, - journal = {Design Science}, - volume = {8}, - pages = {e13}, - publisher = {{Cambridge University Press}}, - issn = {2053-4701}, - doi = {10.1017/DSJ.2022.8}, - urldate = {2022-04-05}, - abstract = {Additive manufacturing (AM) has gained prominence over the last 15~years and become a viable manufacturing option. Since there is great industrial interest to implement serial production of products using AM, the education of engineers in design for additive manufacturing (DfAM) is important today. DfAM extends on design for manufacturing to provide knowledge about the new design opportunities enabled by AM. A set of design heuristics for additive manufacturing (DHAM) to assist designers with conceptual-level DfAM has previously been proposed. In this paper, these DHAM are evaluated through workshops with 3 engineering companies and 19 engineers, in which the participants re-design existing company products for AM using the DHAM as an aid, and then give feedback. The DHAM are well received by the workshop participants, and they find that the DHAM are good for teaching others about the capabilities of AM, provide a checklist of items to consider to help avoid oversights, and encourage the generation of new ideas. Criticisms include the number of examples provided and the lack of information about how to implement the ideas concretely. It is also found that the DHAM fulfil 16 of 18 criteria for early design phase DfAM methods, identified in academic literature.}, - keywords = {creativity,design card deck,design for additive manufacturing (DfAM),design heuristics,design objects,industry,opportunistic DfAM}, - file = {/Users/fabio/Zotero/storage/ZP8LW5Q2/full-text.pdf} -} - -@article{Bloss2001, - title = {Smaller Control Suppliers Also Make Their Mark}, - author = {Bloss, Richard}, - year = {2001}, - month = dec, - volume = {21}, - number = {4}, - pages = {303--306}, - issn = {0144-5154}, - doi = {10.1108/EUM0000000006012} -} - -@article{blumeExAnteAssessment2020, - title = {Ex Ante Assessment of Disruptive Threats: {{Identifying}} Relevant Threats before One Is Disrupted}, - author = {Blume, Maximilian and Oberl{\"a}nder, Anna Maria and R{\"o}glinger, Maximilian and Rosemann, Michael and Wyrtki, Katrin}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120103}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120103}, - urldate = {2020-06-18}, - abstract = {The shortening of product life-cycles accompanied by the rapid development of new products and dissolving industry boundaries are indicative of a multitude of potentially disruptive threats. The survival of incumbents depends on their capability to effectively anticipate and manage such threats. Thus, the early anticipation of disruptive threats to react or prepare for their impacts is a crucial topic in practice and academia. Although the current body of knowledge provides numerous approaches to disruption anticipation, a comprehensive conceptualisation of the evolution of disruptive threats is missing. Moreover, incumbents lack guidance on how to effectively anticipate disruptive threats. To address this gap, we propose the Disruption Evolution Framework (DEF), which conceptualises the course of disruptive threats along three phases (i.e. threat possible, apparent, and materialised) as well as distinguishes four interrelated categories of signals (i.e. context, catalyst, capability, and company signals) and threats (i.e. customer, competitor, product, and policy threats). Building on the DEF, we also propose the Disruptability Assessment Method (DAM), which enables incumbents to systematically assess disruptive threats via a step-by-step procedure. We evaluated the DAM in the Corporate Development and the Global Digital Partnerships departments of an insurance company. Overall, our work contributes to the descriptive and prescriptive knowledge on disruption anticipation.}, - keywords = {Anticipating disruption,Disruptability assessment,Disruption evolution,Disruptive signals,Disruptive threats,Situational method engineering} -} - -@article{blumWhyCircularDoesn2020, - title = {Why ``{{Circular}}'' Doesn't Always Mean ``{{Sustainable}}''}, - author = {Blum, N.U. and Haupt, M. and Bening, C.R.}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105042}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105042}, - urldate = {2020-07-14}, - file = {/Users/fabio/Zotero/storage/X54GYJ92/full-text.pdf} -} - -@article{bobbeDesignCommunicationHow2023, - title = {Design for Communication: How Do Demonstrators Demonstrate Technology?}, - shorttitle = {Design for Communication}, - author = {Bobbe, Tina and Opeskin, Lenard and L{\"u}neburg, Lisa-Marie and Wanta, Helge and Pohlmann, Joshwa and Krzywinski, Jens}, - year = {2023}, - month = jan, - journal = {Design Science}, - volume = {9}, - pages = {e3}, - publisher = {{Cambridge University Press}}, - issn = {2053-4701}, - doi = {10.1017/dsj.2023.1}, - urldate = {2023-08-22}, - abstract = {The importance of inter- and transdisciplinary research for addressing today's complex challenges has been increasingly recognised. This requires new forms of communication and interaction between researchers from different disciplines and nonacademic stakeholders. Demonstrators constitute a crucial communication tool in technology research and development and have the potential to leverage communication between different bodies of knowledge. However, there is little knowledge on how to design demonstrators. This research aims to understand how demonstrators from the fields Internet of Things and Robotics are designed to communicate technology. The goal is to increase the efficiency and effectiveness of demonstrator practice with readily implemented design knowledge and to advance theoretical knowledge in the field of communicating artefacts. We thematically analysed 28 demonstrator design cases, which led to a typology that assists in categorising and understanding 13 key design principles. The typology is built from three perspectives: First, in terms of the overall goal communication, second, in terms of visitor engagement goals (attraction, initial engagement, deep engagement) and third, in terms of resource-related goals (low effort in development and operation). With this typology, we have taken a significant step towards understanding demonstrator design principles for effective technology communication between different stakeholders.}, - langid = {english}, - keywords = {boundary object,demonstrator design,interdisciplinary research,science communication,technology transfer}, - file = {/Users/fabio/Zotero/storage/XEASVTFQ/Bobbe et al. - 2023 - Design for communication how do demonstrators dem.pdf} -} - -@article{bockelBlockchainCircularEconomy2020, - title = {Blockchain for the {{Circular Economy}}: {{Analysis}} of the {{Research-Practice Gap}}}, - author = {B{\"o}ckel, Alexa and Nuzum, Anne-Katrin and Weissbrod, Ilka}, - year = {2020}, - month = dec, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.12.006}, - urldate = {2020-12-14} -} - -@article{bockenCircularBusinessModels2022, - title = {Circular Business Models for the Fastmoving Consumer Goods Industry: Desirability, Feasibility, and Viability}, - author = {Bocken, Nancy M.P. and Harsch, Alisa and Weissbrod, Ilka}, - year = {2022}, - month = jan, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.01.012}, - urldate = {2022-01-25} -} - -@article{Bockin2020, - title = {How Product Characteristics Can Guide Measures for Resource Efficiency \textemdash{} {{A}} Synthesis of Assessment Studies}, - author = {B{\"o}ckin, Daniel and Willskytt, Siri and Andr{\'e}, Hampus and Tillman, Anne-Marie and Ljunggren S{\"o}derman, Maria}, - year = {2020}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {154}, - pages = {104582}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104582} -} - -@article{bockinBusinessModelLife2022, - title = {Business Model Life Cycle Assessment: {{A}} Method for Analysing the Environmental Performance of Business}, - author = {B{\"o}ckin, Daniel and Goffetti, Giulia and Baumann, Henrikke and Tillman, Anne-Marie and Zobel, Thomas}, - year = {2022}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {32}, - pages = {112--124}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.04.014}, - urldate = {2022-04-26} -} - -@article{BodinDanielsson2013, - title = {Is Perception of Leadership Influenced by Office Environment?}, - author = {Bodin Danielsson, Christina and Wulff, Cornelia and Westerlund, Hugo}, - year = {2013}, - journal = {Journal of Corporate Real Estate}, - volume = {15}, - number = {3/4}, - pages = {194--212}, - issn = {1463-001X}, - doi = {10.1108/JCRE-03-2013-0008}, - abstract = {Purpose \textendash{} This explorative study aims to examine the impact of office type on employees' perception of managerial leadership, a largely unexplored area. A gender perspective is applied to examine whether women and men perceive leadership differently in different office types. Design/methodology/approach \textendash{} Cross-sectional study is based on 5,358 office employees from the Swedish Longitudinal Occupational Study of Health in 2010. The employees worked in the seven different office types identified in contemporary office design: cell-offices, shared-room offices, small open plan offices, medium-sized open plan offices, large open plan offices, flex-offices, and combi-offices. Cell-office was used as reference in the analysis. Findings \textendash{} Poorer ratings of leadership were found in shared-room offices, and better in medium-sized open plan offices. A tendency towards a gender difference in perceived leadership was found only in small open plan offices, which appear to be better for men and worse for women. Practi...}, - arxiv = {http://dx.doi.org/10.1108/BIJ-10-2012-0068}, - isbn = {0001253111116}, - pmid = {42012058}, - keywords = {employees,gender differences,leadership,office environment,office type,paper type research paper,workplace} -} - -@article{Boell2015, - title = {On Being 'systematic' in Literature Reviews in {{IS}}}, - author = {Boell, Sebastian K. and {Cecez-Kecmanovic}, Dubravka}, - year = {2015}, - journal = {Journal of Information Technology}, - volume = {30}, - number = {2}, - pages = {161--173}, - issn = {14664437}, - doi = {10.1057/jit.2014.26}, - abstract = {General guidelines for conducting literature reviews often do not address the question of literature searches and dealing with a potentially large number of identified sources. These issues are specifically addressed by so-called systematic literature reviews (SLRs) that propose a strict protocol for the search and appraisal of literature. Moreover, SLRs are claimed to be a 'standardized method' for literature reviews that is replicable, transparent, objective, unbiased and rigorous, and thus superior to other approaches for conducting literature reviews. These are significant and consequential claims that - despite increasing adoption of SLRs - remained largely unnoticed in the information systems (IS) literature. The objective of this debate is to draw attention of the IS community to SLR's claims, to question their justification and reveal potential risks of their adoption. This is achieved by first examining the origins of SLR and the prescribed SLR process and then by critically assessing their claims and implications. In this debate, we show that SLRs are applicable and useful for a very specific kind of literature review, a meta study that identifies and summarizes evidence from earlier research. We also demonstrate that the claims that SLRs provide superior quality are not justified. More importantly, we argue that SLR as a general approach to conducting literature reviews is highly questionable, concealing significant perils. The paper cautions that SLR could undermine critical engagement with literature and what it means to be scholarly in academic work.}, - keywords = {conducting literature reviews,database searches,literature review,literature search,narrative literature review,systematic literature review (SLR),systematic review}, - file = {/Users/fabio/Zotero/storage/Q8MW5N6Q/On being 'systematic' in literature reviews in IS.pdf} -} - -@article{Boer2020, - title = {Additive Manufacturing in Military and Humanitarian Missions: {{Advantages}} and Challenges in the Spare Parts Supply Chain}, - author = {den Boer, Jelmar and Lambrechts, Wim and Krikke, Harold}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {257}, - pages = {120301}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120301}, - file = {/Users/fabio/Zotero/storage/QXSVG6V9/Additive manufacturing in military and humanitarian missions- Advantages and challenges in the spare parts supply chain.pdf} -} - -@article{Bogers2016, - title = {Additive Manufacturing for Consumer-Centric Business Models: {{Implications}} for Supply Chains in Consumer Goods Manufacturing}, - author = {Bogers, Marcel and Hadar, Ronen and Bilberg, Arne}, - year = {2016}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {102}, - pages = {225--239}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2015.07.024}, - abstract = {Digital fabrication-including additive manufacturing (AM), rapid prototyping and 3D printing-has the potential to revolutionize the way in which products are produced and delivered to the customer. Therefore, it challenges companies to reinvent their business model-describing the logic of creating and capturing value. In this paper, we explore the implications that AM technologies have for manufacturing systems in the new business models that they enable. In particular, we consider how a consumer goods manufacturer can organize the operations of a more open business model when moving from a manufacturer-centric to a consumer-centric value logic. A major shift includes a move from centralized to decentralized supply chains, where consumer goods manufacturers can implement a "hybrid" approachwith a focus on localization and accessibility or develop a fully personalizedmodel where the consumer effectively takes over the productive activities of the manufacturer.We discuss some of the main implications for research and practice of consumer-centric business models and the changing decoupling point in consumer goods' manufacturing supply chains.}, - isbn = {0040-1625}, - keywords = {3D printing,Additive manufacturing,Business models,Digital fabrication,Glocalized production,Rapid manufacturing,Rapid prototyping,Supply chains}, - file = {/Users/fabio/Zotero/storage/JHKADLLQ/Additive manufacturing for consumer-centric business models Implications for supply chains in consumer goods manufacturing.pdf} -} - -@article{Bogers2017, - ids = {bogers2017}, - title = {The Open Innovation Research Landscape: Established Perspectives and Emerging Themes across Different Levels of Analysis}, - author = {Bogers, Marcel and Zobel, Ann-Kristin and Afuah, Allan and Almirall, Esteve and Brunswicker, Sabine and Dahlander, Linus and Frederiksen, Lars and Gawer, Annabelle and Gruber, Marc and Haefliger, Stefan and Hagedoorn, John and Hilgers, Dennis and Laursen, Keld and Magnusson, Mats G. and Majchrzak, Ann and McCarthy, Ian P. and Moeslein, Kathrin M. and Nambisan, Satish and Piller, Frank T. and Radziwon, Agnieszka and {Rossi-Lamastra}, Cristina and Sims, Jonathan and Ter Wal, Anne L. J.}, - year = {2017}, - journal = {Industry and Innovation}, - volume = {24}, - number = {1}, - pages = {8--40}, - publisher = {{Routledge}}, - issn = {1366-2716}, - doi = {10.1080/13662716.2016.1240068}, - abstract = {This paper provides an overview of the main perspectives and themes emerging in research on open innovation. The paper is the result of a collaborative process among several open innovation scholars\textemdash having a common basis in the recurrent Professional Development Workshop (PDW) on ``Researching Open Innovation'' at the Annual Meeting of the Academy of Management. In this paper, we present opportunities for future research on open innovation, organized at different levels of analysis. We discuss some of the contingencies at these different levels, and argue that future research needs to study open innovation\textemdash{} originally an organizational-level phenomenon\textemdash across multiple levels of analysis. While our integrative framework allows comparing, contrasting, and integrating different perspectives at different levels of analysis, further theorizing will be needed to advance open innovation research. On this basis, we propose some new research categories as well as questions for future research\textemdash{} particularly those that span across research domains that have so far developed in isolation.}, - keywords = {business model,collaboration,contingencies,crowdsourcing,ecosystems,entrepreneurship,governance,knowledge,Open innovation,organisation,platforms,research,review,strategy,theory} -} - -@article{bogersOpenInnovationResearch2018, - title = {Open Innovation: {{Research}}, Practices, and Policies}, - author = {Bogers, Marcel and Chesbrough, Henry and Moedas, Carlos}, - year = {2018}, - month = feb, - journal = {California Management Review}, - volume = {60}, - number = {2}, - pages = {5--16}, - publisher = {{SAGE Publications Ltd}}, - issn = {21628564}, - doi = {10.1177/0008125617745086}, - urldate = {2021-04-29}, - abstract = {Open innovation is now a widely used concept in academia, business, and policy making. This article describes the state of open innovation at the intersection of research, practice, and policy. It discusses some key trends (e.g., digital transformation), challenges (e.g., uncertainty), and potential solutions (e.g., EU funding programs) in the context of open innovation and innovation policy. With this background, the authors introduce select papers published in this Special Section of California Management Review that were originally presented at the second annual World Open Innovation Conference, held in Santa Clara, California, in December of 2015.}, - keywords = {Europe,Innovation,Open innovation,Policy making,Public policy}, - file = {/Users/fabio/Zotero/storage/EFN2V3IF/full-text.pdf} -} - -@article{Boisseau2018, - title = {Open-Design: {{A}} State of the Art Review}, - author = {Boisseau, {\'E}tienne and Omhover, Jean Fran{\c c}ois and Bouchard, Carole}, - year = {2018}, - journal = {Design Science}, - volume = {4}, - pages = {1--44}, - issn = {20534701}, - doi = {10.1017/dsj.2017.25}, - abstract = {The 'open approach' is rooted in the open-source and free-software movements. Its application has spread to more fields than computer engineering. Product design is impacted as well: we observe new stakeholders and practices challenging current structured design processes and leading to industrial successes. Open-design appears to be promising yet disruptive. Moreover, its distinctive features remain unclear. This paper aims to popularize this new concept, as well as to give both researchers and practitioners an overview of current research on open-design, and its consequences on design. For this, we conducted a systematic quantitative bibliometric analysis of 624 entries corresponding to the keyword 'open-design' in the Scopus database. This supports a qualitative synthesis of scientific literature, enabling us to summarize practices falling under the umbrella term 'open-design'. As such, this paper traces the evolution of product design and the open approach. It also analyzes the impact of open-design on the design process as presented in the scientific literature. Finally, this paper develops a typology of open-design of tangible artifacts that distinguishes among three currently reported varieties of practice: do-it-yourself, meta-design, and industrial ecosystems. As the major contribution of this paper, this typology is developed as a final discussion.}, - keywords = {Open source,Open-design,Product design,Systematic literature review,Typology}, - file = {/Users/fabio/Zotero/storage/EKI635TK/Open-design- A state of the art review.pdf} -} - -@article{Boldoczki2020, - title = {The Environmental Impacts of Preparation for Reuse: {{A}} Case Study of {{WEEE}} Reuse in {{Germany}}}, - author = {Boldoczki, Sandra and Thorenz, Andrea and Tuma, Axel}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {252}, - pages = {119736}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.119736} -} - -@article{boldriniDesigningTestingNew2021, - title = {Designing and Testing a New {{Sustainable Business Model}} Tool for {{Multi-actor}}, {{Multi-level}}, {{Circular}}, and {{Collaborative}} Contexts}, - author = {Boldrini, Jean-Claude and Antheaume, Nicolas}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {127209}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127209}, - urldate = {2021-05-10} -} - -@article{bolsonResilienceRankingsTrajectories2022, - title = {Resilience Rankings and Trajectories of World's Countries}, - author = {Bolson, Natanael and Yutkin, Maxim and Rees, William and Patzek, Tadeusz}, - year = {2022}, - month = may, - journal = {Ecological Economics}, - volume = {195}, - pages = {107383}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2022.107383}, - urldate = {2022-03-14} -} - -@article{boluda-verduFearFutureEcoanxiety2022, - title = {Fear for the Future: {{Eco-anxiety}} and Health Implications, a Systematic Review}, - shorttitle = {Fear for the Future}, - author = {{Boluda-Verd{\'u}}, Inmaculada and {Senent-Valero}, Marina and {Casas-Escolano}, Mariola and Matijasevich, Alicia and {Pastor-Valero}, Mar{\'i}a}, - year = {2022}, - month = dec, - journal = {Journal of Environmental Psychology}, - volume = {84}, - pages = {101904}, - issn = {0272-4944}, - doi = {10.1016/j.jenvp.2022.101904}, - urldate = {2022-12-12}, - abstract = {Background Although there is no standard definition for eco-anxiety, most authors define it as people's emotional reaction of concern, worry, anxiety, and fear in view of global Climate Change (CC) threats and concurrent environmental degradation. This systematic review was carried out to critically evaluate the evidence on eco-anxiety related to CC and its health implications in general populations. Methods We performed a search for scientific articles in PubMed, Scopus, Embase, Web of Science, and Cochrane Central. Studies were included if they complied with the study objective. Selection of articles and data extraction were carried out independently by 2 reviewers. We used the Axis tool and JBI critical appraisal checklist to assess the quality of the studies. Results A final sample of 12 articles was included in this review. The methodological quality of the studies was limited. A wide variety of eco-anxiety definitions was used in the different studies but further research is needed to provide conceptual clarity of the term eco-anxiety. Eco-anxiety was associated with functional impairment, symptoms of depression, anxiety, PTSD, stress and insomnia, lower self-rated mental health, and reluctance to have children. Moreover, habitual worry about global warming was associated with a pro-ecological worldview, a green self-identity and pro-environmental behavior, strongly suggesting a constructive nature. Indeed, pro-environmental behavior in the form of climate activism would buffer the impact of CCA cognitive-emotional impairment on MDD symptoms. However, sometimes engaging in pro-environmental behavior might not be successful in dealing with eco-anxiety, since individuals might perceive that their efforts do not help to mitigate the CC crisis. Conclusions Results have to be interpreted with caution since the methodological quality of the studies was limited. However, they do suggest a link between eco-anxiety and negative mental health outcomes, mainly in younger generations, women, and poorer countries in the ``Global South''. Eco-anxiety may constitute a stressor to mental health, particularly if coping mechanisms are not successfully developed.}, - langid = {english}, - keywords = {Climate change,Eco-anxiety,Health,Mental health}, - file = {/Users/fabio/Zotero/storage/LB7FCC6Q/Boluda-Verdú et al_2022_Fear for the future.pdf;/Users/fabio/Zotero/storage/I75FGF8D/S0272494422001499.html} -} - -@article{Bolund1999, - title = {Ecosystem Services in Urban Areas}, - author = {Bolund, Per and Hunhammar, Sven}, - year = {1999}, - month = may, - journal = {Ecological Economics}, - volume = {29}, - number = {2}, - pages = {293--301}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/S0921-8009(99)00013-0}, - urldate = {2021-09-14}, - abstract = {Humanity is increasingly urban, but continues to depend on Nature for its survival. Cities are dependent on the ecosystems beyond the city limits, but also benefit from internal urban ecosystems. The aim of this paper is to analyze the ecosystem services generated by ecosystems within the urban area. 'Ecosystem services' refers to the benefits human populations derive from ecosystems. Seven different urban ecosystems have been identified: street trees; lawns/parks; urban forests; cultivated land; wetlands; lakes/sea; and streams. These systems generate a range of ecosystem services. In this paper, six local and direct services relevant for Stockholm are addressed: air filtration, micro climate regulation, noise reduction, rainwater drainage, sewage treatment, and recreational and cultural values. It is concluded that the locally generated ecosystem services have a substantial impact on the quality-of-life in urban areas and should be addressed in land-use planning.}, - keywords = {Ecosystem,Ecosystem services,Urban areas}, - file = {/Users/fabio/Zotero/storage/2NMUUUH6/Bolund, Hunhammar - 1999 - Ecosystem services in urban areas.pdf} -} - -@article{bongersCircularEconomyOptimal2022, - title = {The Circular Economy and the Optimal Recycling Rate: {{A}} Macroeconomic Approach}, - shorttitle = {The Circular Economy and the Optimal Recycling Rate}, - author = {Bongers, Anel{\'i} and Casas, Pablo}, - year = {2022}, - month = sep, - journal = {Ecological Economics}, - volume = {199}, - pages = {107504}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2022.107504}, - urldate = {2022-09-18}, - abstract = {This paper studies the economic implications of the circular economy and recycling activities from a macroeconomic perspective. The paper incorporates the circular economy into an otherwise standard neoclassical dynamic general equilibrium linear economy model, in which the production function depends on capital, labor, and raw materials. Raw materials are a composite of natural resources (the linear economy) and recycled material (the circular economy). Waste is a function of consumption but can be incorporated back into production activities through recycling. We find the existence of a positive S-shaped relationship between the optimal recycling rate and economic development, indicating that increasing the circularity of the economy is a necessary condition to augment social welfare in a growing economy. The optimal recycling rate depends positively on the pollution damage and waste content of final consumption goods. Simulation of the model supports the existence of a steady-state Environmental Kuznets Curve (EKC) relationship between the stock of waste and the output in the presence of a circular economy. Finally, we find that while a permanent improvement in recycling technology has positive effects on output, expanding the circularity of the economy, an increase in the cost of natural material has harmful effects on output, increasing waste accumulation and reducing recycling.}, - langid = {english}, - keywords = {Circular economy,Linear economy,Natural resources,Raw material,Recycling rate,Waste}, - file = {/Users/fabio/Zotero/storage/CAMTYMKK/Bongers_Casas_2022_The circular economy and the optimal recycling rate.pdf;/Users/fabio/Zotero/storage/Y7KCQQXT/S0921800922001665.html} -} - -@article{bonifaziFastEffectiveClassification2023, - title = {Fast and Effective Classification of Plastic Waste by Pushbroom Hyperspectral Sensor Coupled with Hierarchical Modelling and Variable Selection}, - author = {Bonifazi, Giuseppe and Capobianco, Giuseppe and Serranti, Silvia}, - year = {2023}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {197}, - pages = {107068}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107068}, - urldate = {2023-07-06}, - abstract = {Plastic waste management represents a global challenge in the framework of sustainable production and consumption of resources. One of the most critical issues in plastic recycling is polymer separation, necessary to obtain high-quality secondary raw material flow streams. The aim of this work was to build a classification strategy, based on pushbroom hyperspectral imaging, able to recognize the most common polymers found in mixed plastic waste to be applied at recycling plant scale. After exploring polymer spectral differences by principal component analysis, a hierarchical partial least squares-discriminant analysis, based on the acquired full spectra, and a hierarchical interval partial least squares-discriminant analysis, based on selected variables, were tested and their performances were evaluated and compared. High quality classification results were obtained in both cases, demonstrating that the developed multi-class models can be utilized in a flexible way for quality control and/or for on-line sorting actions in recycling plants.}, - langid = {english}, - keywords = {Circular economy,Hyperspectral imaging,Plastic waste,Polymer recycling,Quality control,Sensor-based sorting}, - file = {/Users/fabio/Zotero/storage/BB882KWH/S0921344923002045.html} -} - -@article{BonninRoca2019, - title = {Technology Cost Drivers for a Potential Transition to Decentralized Manufacturing}, - author = {Bonn{\'i}n Roca, Jaime and Vaishnav, Parth and Laureijs, Rianne E. and Mendon{\c c}a, Joana and Fuchs, Erica R.H.}, - year = {2019}, - month = aug, - journal = {Additive Manufacturing}, - volume = {28}, - pages = {136--151}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.04.010}, - file = {/Users/fabio/Zotero/storage/62NCCADJ/Technology cost drivers for a potential transition to decentralized manufacturing.pdf} -} - -@article{bonninrocaTechnologyForgivenessWhy2021, - title = {Technology {{Forgiveness}}: {{Why}} Emerging Technologies Differ in Their Resilience to Institutional Instability}, - author = {Bonn{\'i}n Roca, Jaime and Vaishnav, Parth and Morgan, Granger M. and Fuchs, Erica and Mendon{\c c}a, Joana}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120599}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120599}, - urldate = {2021-02-14}, - abstract = {Long-term public support may encourage the diffusion of emerging technologies by coordinating the generation of knowledge and providing patient funding, but unexpected policy changes may hinder private investment and even lead to situations of technology lockout. Leveraging archival data; insights from 45 interviews across academia, industry, and government; and 75 hours of participant observations, we develop insights about why institutional instability in Portugal affected the adoption of Polymer Additive Manufacturing (PAM) and Metal Additive Manufacturing (MAM) differently. In both cases, Portugal invested in the technology relatively early. While PAM has been widely adopted, including increasingly in high-tech applications, MAM adoption has been modest despite MAM's potential to greatly improve the performance and competitiveness of metal molds. From the comparison between PAM and MAM, we generate theory about technological and contextual factors that affect `technological forgiveness', defined as the resilience of a new technology's adoption to institutional instability.}, - keywords = {Additive manufacturing,Institutional instability,Latecomer countries,Technological uncertainty,Technological upgrading,Technology adoption} -} - -@incollection{Bonvoisin2016, - title = {Implications of Open Source Design for Sustainability}, - author = {Bonvoisin, J{\'e}r{\'e}my}, - year = {2016}, - pages = {49--59}, - doi = {10.1007/978-3-319-32098-4_5} -} - -@inproceedings{Bonvoisin2017, - title = {{{CURRENT STATE OF PRACTICES IN OPEN SOURCE PRODUCT DEVELOPMENT}}}, - booktitle = {Proc. 21st Int. {{Conf}}. {{Eng}}. {{Des}}. {{Vol}}. 2 Des. {{Process}}. {{Des}}. {{Organ}}. {{Manag}}.}, - author = {Bonvoisin, J and Thomas, L. and Mies, R. and Gros, C. and Stark, R and Samuel, K. and Jochem, R. and Boujut, {\relax JF}}, - year = {2017}, - address = {{Vancouver, Canada, 21-25 August 2017.}}, - isbn = {978-1-904670-90-2}, - file = {/Users/fabio/Zotero/storage/8SKKQRYQ/Bonvoisin et al_2017_CURRENT STATE OF PRACTICES IN OPEN SOURCE PRODUCT DEVELOPMENT.pdf} -} - -@article{Bonvoisin2018, - title = {How Participative Is Open Source Hardware? {{Insights}} from Online Repository Mining}, - author = {Bonvoisin, J{\'e}r{\'e}my and Buchert, Tom and Preidel, Maurice and Stark, Rainer G.}, - year = {2018}, - month = nov, - volume = {4}, - pages = {e19}, - issn = {2053-4701}, - doi = {10.1017/dsj.2018.15}, - abstract = {Open Source Hardware (OSH) is an increasingly viable approach to intellectual property management extending the principles of Open Source Software (OSS) to the domain of physical products. These principles support the development of products in transparent processes allowing the participation of any interested person. While increasing numbers of products have been released as OSH, little is known on the prevalence of participative development practices in this emerging field. It remains unclear to which extent the transparent and participatory processes known from software reached hardware product development. To fill this gap, this paper applies repository mining techniques to investigate the transparency and workload distribution of 105 OSH product development projects. The results highlight a certain heterogeneity of practices filling a continuum between public and private development settings. They reveal different organizational patterns with different levels of centralization and distribution. Nonetheless, they clearly indicate the expansion of the open source development model from software into the realms of physical products and provide the first large-scale empirical evidence of this recent evolution. Therewith, this article gives body to an emerging phenomenon and contributes to give it a place in the scientific debate. It delivers categories to delineate practices, techniques to investigate them in further detail as well as a large dataset of exemplary OSH projects. The discussion of first results signposts avenues for a stream of research aiming at understanding stakeholder interactions at work in new product innovation practices in order to enable institutions and industry in providing appropriate responses.} -} - -@article{Bonvoisin2018b, - ids = {Bonvoisin2018a}, - title = {Measuring Openness in Open Source Hardware with the Open-o-Meter}, - author = {Bonvoisin, J{\'e}r{\'e}my and Mies, Robert}, - year = {2018}, - journal = {Procedia CIRP}, - volume = {78}, - pages = {388--393}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2018.08.306}, - abstract = {Open Source Hardware (OSH) products are those whose design are made publicly available so that anyone can study, modify, distribute, make, and sell them. In spite of the increasing popularity of this novel approach to intellectual property in product innovation, practice communities have faced difficulties to refine this concept into sharp and practical terms. There is to date no widely acknowledged criteria for determining whether a product is open source or not. Assuming OSH follows the same development path as Open Source Software and becomes a mainstream approach, the issue of conformance will also become critical for both producers and consumers. To address this gap, this contribution introduces a self-declared product openness marking scheme allowing to rate the openness of a product. Looking forward, it provides conceptual inputs for the future establishment of technical standards bringing clarity in this emerging and moving field.}, - isbn = {9781510875692}, - keywords = {certification,compliance,open design,open innovation,standardization}, - file = {/Users/fabio/Zotero/storage/CFRXUIU4/Bonvoisin_Mies_2018_Measuring openness in open source hardware with the open-o-meter.pdf} -} - -@inproceedings{bonvoisinDesignPrinciplesDoityourself2017, - title = {Design Principles for Do-It-Yourself Production}, - booktitle = {Smart {{Innovation}}, {{Systems}} and {{Technologies}}}, - author = {Bonvoisin, J{\'e}r{\'e}my and Galla, Jahnavi Krishna and Prendeville, Sharon}, - year = {2017}, - volume = {68}, - pages = {77--86}, - publisher = {{Springer Science and Business Media Deutschland GmbH}}, - issn = {21903026}, - doi = {10.1007/978-3-319-57078-5_8}, - urldate = {2021-01-01}, - abstract = {The increasing access of people to fabrication capabilities has stimulated the emergence of personal fabrication settings and inspired post-industrial production scenarios. One strategy to support personal production is to increase technology literacy and access for citizens to means of production. Yet, so far, the deliberate design of products so they can be realized by individuals, an activity termed here as ``design for do-it-yourself (DIY) production'', has been under-explored in academia. The present article aims to formalize the know-how gained by practitioners who designed products for production in do-it-yourself settings. It provides an original definition of DIY and the formulation of 14 design principles for DIY production to support practice.}, - isbn = {978-3-319-57077-8}, - keywords = {Commons-based peer production,Design principles,Distributed production,DIY} -} - -@article{bonvoisinSevenObservationsResearch2021, - title = {Seven Observations and Research Questions about {{Open Design}} and {{Open Source Hardware}}}, - author = {Bonvoisin, J{\'e}r{\'e}my and Mies, Robert and Boujut, Jean-Fran{\c c}ois}, - year = {2021/ed}, - journal = {Design Science}, - volume = {7}, - pages = {e22}, - publisher = {{Cambridge University Press}}, - issn = {2053-4701}, - doi = {10.1017/dsj.2021.14}, - urldate = {2022-10-11}, - abstract = {`Openness' is one of the key concepts brought forward by postindustrial narratives questioning the modern repartition of roles between industries and customers. In these narratives, citizen participation in design and intellectual property management based on open source principles are the promise of more sustainable production models. In this context, openness in product design and development has been the object of growing interest and experimentation from academia, businesses and grassroots communities. As a result, numerous concepts emerged that attempt to grasp the essence of this phenomenon, unfortunately leading to overlapping, conflicting or speculative depictions. In this article, we share the understanding we gained throughout 6~years of research on Open Design and Open Source Hardware and attempt to make the difference between myths and facts. We depict an enthusiastic but realistic picture of Open Design and Open Source Hardware practices as we could observe them and deliver a structured framework to situate concepts and their differences. From this, we share seven observations leading to seven corresponding research questions and establish a research agenda to stimulate further investigations into this socially relevant and potentially ground-breaking phenomenon.}, - langid = {english}, - keywords = {crowdsourcing,open source innovation,open source product development,social product development}, - file = {/Users/fabio/Zotero/storage/RAPABAR4/Bonvoisin et al. - 2021 - Seven observations and research questions about Op.pdf;/Users/fabio/Zotero/storage/UXBT9LTS/985195D3A9DF51C6B74226087C291E77.html} -} - -@techreport{bookECOSYSTEMSERVICESSUSTAINABLE2015, - title = {{{ECOSYSTEM SERVICES AND SUSTAINABLE DEVELOPMENT}}: {{OPPORTUNITIES AND CHALLENGES}}}, - author = {Book, {$\cdot$}}, - year = {2015}, - urldate = {2021-04-23}, - file = {/Users/fabio/Zotero/storage/LAV6UTZP/full-text.pdf} -} - -@article{Boonrod2015, - title = {Enhancing Organic Waste Separation at the Source Behavior: {{A}} Case Study of the Application of Motivation Mechanisms in Communities in {{Thailand}}}, - author = {Boonrod, K. and Towprayoon, S. and Bonnet, S. and Tripetchkul, S.}, - year = {2015}, - journal = {Resources, Conservation and Recycling}, - volume = {95}, - pages = {77--90}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2014.12.002}, - abstract = {This paper explores organic waste separation behavior at the source when various motivation mechanisms are implemented. Four mechanisms are applied in pilot areas to observe the differences in behavior. A traditional mechanism is introduced to the community as the first campaign followed by a voluntary mechanism, which is another non-economic incentive mechanism. Next, two economic incentive mechanisms, namely, a reward mechanism and a community business mechanism, are applied. These four mechanisms were applied in the Nakhon Ratchasima metropolitan area, one of the largest commercialized cities in northeastern Thailand, in 2010. The study found that the traditional mechanism yields a 19\% organic waste separation efficiency. When the voluntary mechanism is applied, the efficiency increases to 36\%. The economic incentive mechanism further increases the waste separation behavior: the reward mechanism increases the efficiency to 51\%, and the community business mechanism is the best mechanism, with an efficiency of 58\% being observed. The study also found that housing style influences the quantity of organic waste separation, while community style influences the quality of organic waste separation. These results are helpful in devising appropriate management plans for enhancing waste management practices, which will directly improve the sustainability of using organic waste in future energy projects.}, - isbn = {09213449}, - keywords = {Motivation mechanism,Organic waste,Public participation,Separation at the source}, - file = {/Users/fabio/Zotero/storage/7FFAYXRR/Enhancing organic waste separation at the source behavior A case study of the application of motivation mechanisms in communities in Tha.pdf} -} - -@article{Boons2017, - title = {Industrial {{Symbiosis Dynamics}} and the {{Problem}} of {{Equivalence}}: {{Proposal}} for a {{Comparative Framework}}}, - author = {Boons, Frank and Chertow, Marian and Park, Jooyoung and Spekkink, Wouter and Shi, Han}, - year = {2017}, - month = aug, - journal = {Journal of Industrial Ecology}, - volume = {21}, - number = {4}, - pages = {938--952}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {15309290}, - doi = {10.1111/jiec.12468}, - urldate = {2022-02-18}, - abstract = {Industrial symbiosis (IS), one of the founding notions within the field of industrial ecology, has diffused throughout significant parts of the world as a practice that can reduce the ecological impact of the industrial processes of groups of firms. In this article, we propose a fresh look at this research topic, building on the considerable advances that have been made in the last 15 years in understanding how IS comes about. We propose a conceptual and theoretical framework for taking on the challenge of comparative analysis at a global level. This requires developing an approach to address a solution to the problem of equivalence: the difficulty of comparing instances of IS across different institutional contexts. The proposed framework emphasizes IS as a process and attempts to address the obstacles to comparative study by (1) identifying terminology to examine IS variants, (2) providing a typology of IS dynamics, and (3) formulating key research questions to illuminate a way forward. In developing our argument, we build on the collective experiences of collaborative research efforts in North America, Europe, and Asia as evidenced in recent overviews of the literature.}, - keywords = {business strategy,comparative analysis,industrial ecology,industrial park,industrial symbiosis (IS),social science}, - file = {/Users/fabio/Zotero/storage/DX8F9B7Y/J of Industrial Ecology - 2016 - Boons - Industrial Symbiosis Dynamics and the Problem of Equivalence Proposal for a.pdf} -} - -@article{Booth2012, - title = {The Literature Review: Its Role within Research}, - author = {Booth, Andrew and Papaioannou, Diana and Sutton, Anthea}, - year = {2012}, - journal = {Systematic Approaches to a Successful Literature Review (SAGE, 2012)}, - number = {2012}, - pages = {1--16}, - abstract = {Conducting any type of research project without conducting a literature review can be likened to travelling to a strange and exotic country but never coming out of your hotel room. How will you convince your friends back home that you truly sampled the delights of this exotic destination? Granted you may reach your des- tination, you may even achieve the occasional moment of insight but you will be starved of so many valuable moments of discovery. It may seem to an outsider that you have never even travelled at all! Without a literature review, you will not be able to understand your topic fully. You will not be able to identify what has already been researched and what remains to be explored, and you will deny yourself valuable insights into those methods that are or are not appropriate for investigation of your topic. You will not only face the danger of reinventing the wheel but, even more critically, you will run the risk of `reinventing the flat tyre'! What}, - isbn = {1446253724}, - file = {/Users/fabio/Zotero/storage/WDRWHMGN/The literature review- its role within research.pdf} -} - -@article{Bootz2019, - title = {Foresight and Knowledge Management. {{New}} Developments in Theory and Practice}, - author = {Bootz, Jean-Philippe and Durance, Philippe and Monti, R{\'e}gine}, - year = {2019}, - month = mar, - journal = {Technological Forecasting and Social Change}, - volume = {140}, - pages = {80--83}, - issn = {00401625}, - doi = {10.1016/j.techfore.2018.12.017} -} - -@article{Boparai2016, - title = {Thermal Characterization of Recycled Polymer for Additive Manufacturing Applications}, - author = {Boparai, K.S. and Singh, R. and Fabbrocino, F. and Fraternali, F.}, - year = {2016}, - month = dec, - journal = {Composites Part B: Engineering}, - volume = {106}, - pages = {42--47}, - publisher = {{Elsevier Ltd}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2016.09.009}, - abstract = {This work is focused on the thermal characterization of Nylon 6 based nano-composite (NC) material. Initially, melt flow index (MFI) test confirms the qualification of this material, as an alternative material for the fabrication of FDM filament. The differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA) measurements characterize the material by recording their phase and mass changes as a function of temperature. The DSC results confirmed the decrease of crystallinity with the inclusion of nano fillers but also realized that these filler particles act as a thermodynamic sink and improves its stability. The TGA analysis also demonstrated the increase in thermal stability and flame retardancy level of NC material. In addition to above scanning electron microscopy analysis visualized the dispersion of filler materials in Nylon 6 matrix.}, - keywords = {Differential scanning calorimeter,Feed stock filament,Fused deposition modeling,Thermal properties,Thermogravimetric analysis}, - file = {/Users/fabio/Zotero/storage/K8EX9XEM/Thermal characterization of recycled polymer for additive manufacturing applications.pdf} -} - -@article{Boparai2016a, - title = {Process Optimization of Single Screw Extruder for Development of {{Nylon}} 6-{{Al-Al}} 2 {{O}} 3 Alternative {{FDM}} Filament}, - author = {Boparai, Kamaljit Singh and Singh, Rupinder and Singh, Harwinder}, - year = {2016}, - month = jun, - journal = {Rapid Prototyping Journal}, - volume = {22}, - number = {4}, - pages = {766--776}, - publisher = {{Emerald Group Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-09-2014-0119}, - urldate = {2017-09-21}, - abstract = {Purpose The purpose of this study is to investigate the process parameters of a single-screw extruder for development of Nylon6-Al-Al2O3-based alternative fused deposition modeling process (FDM) feedstock filament (in lieu of commercial acrylonitrile butadiene styrene filament). The effect of major screw extruder parameters on the tensile strength of fabricated filaments has also been analyzed. Design/methodology/approach The Taguchi experimental log has been designed for investigating the significance of input parameters of screw extruders (such as mean barrel temperature, die temperature, screw speed, material composition and speed of take up unit) on the tensile strength of fabricated filaments. The suitability of alternative material as an FDM filament has been verified by rheological investigations. The tensile strength of an alternative feedstock filament has been investigated experimentally according to the ASTM-638 standard. The analysis was performed by the analysis of variance (ANOVA) method wit...}, - keywords = {Feedstock filament,Fused deposition modeling,Rapid tooling,Single screw extruder,Tensile properties}, - file = {/Users/fabio/Zotero/storage/8H7W5KLL/Process optimization of single screw extruder for development of Nylon 6-Al-Al 2 O 3 alternative FDM filament.pdf} -} - -@article{borahTeachingfocusedUniversityIndustry2020, - title = {Teaching-Focused University\textendash Industry Collaborations: {{Determinants}} and Impact on Graduates' Employability Competencies}, - author = {Borah, Dhruba and Malik, Khaleel and Massini, Silvia}, - year = {2020}, - month = dec, - journal = {Research Policy}, - pages = {104172}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104172}, - urldate = {2020-12-21} -} - -@article{boraWastePolypropylenePlastic2020, - title = {Waste {{Polypropylene Plastic Recycling}} toward {{Climate Change Mitigation}} and {{Circular Economy}}: {{Energy}}, {{Environmental}}, and {{Technoeconomic Perspectives}}}, - author = {Bora, Raaj R. and Wang, Ralph and You, Fengqi}, - year = {2020}, - month = oct, - journal = {ACS Sustainable Chemistry \& Engineering}, - publisher = {{American Chemical Society (ACS)}}, - issn = {2168-0485}, - doi = {10.1021/acssuschemeng.0c06311}, - urldate = {2020-10-27}, - abstract = {Chemical recycling has the potential to reduce the environmental impacts from waste plastics, mitigate climate change, and contribute to circular economy. This study compares the environmental and economic performance of two such technologies, fast pyrolysis and gasification, with conventional disposal methods for treating polypropylene (PP) waste. High-fidelity process simulations for each technology are conducted to obtain the necessary mass, energy, and economic data for subsequent analyses. Through an extensive life cycle assessment utilizing the IPCC 2013, ReCiPe, and ILCD 2.0 methods, fast pyrolysis and gasification are determined to have lower overall greenhouse gas emissions and better overall environmental performance than the conventional methods of incineration and landfilling. The chemical recycling systems are also found to be considerably profitable with fast pyrolysis and gasification having total NPVs of \$149MM and \$96MM, respectively. The discount rate, waste PP price, and plant life are the most influential factors for the economic performance of both systems.}, - keywords = {Chemical recycling,Circular economy,Life cycle assessment,Technoeconomic analysis,Waste polypropylene}, - file = {/Users/fabio/Zotero/storage/C8RJNP8Q/full-text.pdf} -} - -@article{Bordel2014d, - title = {From Technological Acceptability to Appropriation by Users: {{Methodological}} Steps for Device Assessment in Road Safety}, - author = {Bordel, St{\'e}phanie and Somat, Alain and Barbeau, Herv{\'e} and Anceaux, Fran{\c c}oise and Greffeuille, Catherine and Menguy, Ga{\"e}lle and Pacaux, Marie Pierre and Subirats, Peggy and Terrade, Florence and Gallenne, Marie Line}, - year = {2014}, - journal = {Accident Analysis and Prevention}, - volume = {67}, - pages = {159--165}, - issn = {00014575}, - doi = {10.1016/j.aap.2014.01.016}, - abstract = {This article presents the methodology developed within the framework of the research project SARI (Automated Road Surveillance for Driver and Administrator Information). This methodology is based on the logic of action research. The article presents the different stages in the development of technological innovation addressing vehicle control loss when driving on a curve. The results observed in speed reduction illustrate that no matter how optimal an innovation may be technologically speaking, it is only as effective as it is acceptable from a user standpoint. This acceptability can only be obtained if the technology is developed by engineers in liaison with social science specialists. ?? 2014 Elsevier Ltd. All rights reserved.}, - pmid = {24508421}, - keywords = {Acceptability,Action research,Appropriation,Innovation} -} - -@article{bordoniAssessmentNaturalCapital2023, - title = {Assessment of Natural Capital and Environmental Flows Distribution: {{A Mediterranean}} Case Study}, - shorttitle = {Assessment of Natural Capital and Environmental Flows Distribution}, - author = {Bordoni, Rachele and Rigo, Ilaria and Dapueto, Giulia and Povero, Paolo and Vassallo, Paolo and Paoli, Chiara}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {409}, - pages = {137228}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137228}, - urldate = {2023-05-01}, - abstract = {The coastal marine area hosts among the most productive ecosystems in the world, in terms of biomass and species richness. These ecosystems' natural capital stocks provide essential flows of resources for the environment and human life. The distribution of natural capital (NC) and environmental flows (ENFL) characterizing the coastal marine habitats of Ligurian Sea, a biodiversity hotspot in the Mediterranean region, were assessed to define their current state. The study area was divided into 43 functional spatial sections, defined as ``biomarine units''. In each biomarine unit natural capital and environmental flows were estimated using data on benthic and fish biomass. Emergy analysis, a thermodynamics-based methodology that expresses the costs in terms of resources incurred by nature to maintain the ecological processes of the marine coastal habitats, was then applied to assess the natural capital and the environmental flows in biophysical terms (solar emergy joules, sej), and using appropriate conversion factors, in monetary terms (emergy euro, em\texteuro ). The monetary equivalents facilitate understanding for stakeholders and pave the way for the inclusion of marine resources value in socioeconomic and political contexts. The total value of natural capital for the Ligurian coastal and marine area is 2.11 billion em\texteuro, while for environmental flows, it is 1.43 billion em\texteuro{} a-1. Greater values belong to units included within the boundaries of protected areas, proving the efficiency of the protection measures taken. These values represent a reference point and shall be kept constant to preserve natural capital and to ensure services provisioning at least at the current level. This work identify a method useful to monitor the status of natural capital value and environmental flows along Ligurian coast, which can be helpful to stakeholders and policymakers for better monitoring and management of the area.}, - langid = {english}, - keywords = {Biophysical method,Donor-side approach,Emergy analysis,Marine ecosystems,Monetary conversion,Spatial analysis}, - file = {/Users/fabio/Zotero/storage/E9TXD94A/Bordoni et al_2023_Assessment of natural capital and environmental flows distribution.pdf;/Users/fabio/Zotero/storage/RSBRVVRL/S0959652623013860.html} -} - -@article{borgCurbingPlasticConsumption2022, - title = {Curbing Plastic Consumption: {{A}} Review of Single-Use Plastic Behaviour Change Interventions}, - author = {Borg, Kim and Lennox, Alyse and Kaufman, Stefan and Tull, Fraser and Prime, Renee and Rogers, Luke and Dunstan, Emily}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {344}, - pages = {131077}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131077}, - urldate = {2022-03-13} -} - -@article{bormsWorkingFutureAnalysis2023, - title = {The Working Future: {{An}} Analysis of Skills Needed by Circular Startups}, - shorttitle = {The Working Future}, - author = {Borms, Lize and Van Opstal, Wim and Brusselaers, Jan and Van Passel, Steven}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {409}, - pages = {137261}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137261}, - urldate = {2023-04-30}, - abstract = {Aside from potential environmental benefits, the implementation of circular economy principles in businesses can have merits for the labour market. The current unemployment in several regions of Europe and the qualitative mismatch between supply and demand could be countered by reskilling the labour force to adjust supply and demand to one another for increased reuse, repair, or recycling, among others. This study uses interviews to increase the focus of the research question and uses survey data to perform an ordered probit regression analysis to sketch the current and future landscape of startups' skills in Flanders (Belgium), and to analyse the relationship between circular strategies and different types of skills. The results show that design to lower material use increases the need for transport and logistics skills, digitalisation increases the need for R\&D and IT skills, and the recuperation of waste requires technical knowledge. Furthermore, gender, age, and experience of the entrepreneur influence the needed skills. The paper probed for policy recommendations for the uptake of circular strategies and recommendations for future research. The most asked policy measures by the respondents are innovation and collaboration support (subsidies), fiscal measures that support circular goods and services, and public procurement for circular goods and services. This research is of relevance for several stakeholders, such as startup ecosystems, sector organisations, policy makers in innovation policy and labour market policy, and educational institutions.}, - langid = {english}, - keywords = {Circular economy,Circular strategies,Labour market,Skills,Startup,Survey}, - file = {/Users/fabio/Zotero/storage/N8KA5PE7/S0959652623014191.html} -} - -@article{Borner2005, - title = {Visualizing Knowledge Domains}, - author = {B{\"o}rner, Katy and Chen, Chaomei and Boyack, Kevin W.}, - year = {2005}, - month = jan, - journal = {Annual Review of Information Science and Technology}, - volume = {37}, - number = {1}, - eprint = {0803.1716}, - pages = {179--255}, - issn = {00664200}, - doi = {10.1002/aris.1440370106}, - abstract = {No Abstract.}, - archiveprefix = {arxiv}, - isbn = {0066-4200}, - pmid = {22114186}, - file = {/Users/fabio/Zotero/storage/67MMPGGW/Visualizing knowledge domains.pdf} -} - -@article{bornerEffectivenessPaymentsEnvironmental2017, - title = {The {{Effectiveness}} of {{Payments}} for {{Environmental Services}}}, - author = {B{\"o}rner, Jan and Baylis, Kathy and Corbera, Esteve and {Ezzine-de-Blas}, Driss and {Honey-Ros{\'e}s}, Jordi and Persson, U. Martin and Wunder, Sven}, - year = {2017}, - month = aug, - journal = {World Development}, - volume = {96}, - pages = {359--374}, - publisher = {{Elsevier Ltd}}, - issn = {18735991}, - doi = {10.1016/j.worlddev.2017.03.020}, - urldate = {2021-04-21}, - abstract = {We adopt a theory-based approach to synthesize research on the effectiveness of payments for environmental services in achieving environmental objectives and socio-economic co-benefits in varying contexts. Our theory of change builds on established conceptual models of impact pathways and highlights the role of (1) contextual dimensions (e.g., political, institutional, and socio-economic conditions, spatial heterogeneity in environmental service values and provision costs, and interactions with pre-existing policies), and (2) scheme design (e.g., payment type and level, contract length, targeting, and differentiation of payments) in determining environmental and socio-economic outcomes. To shed light on the overall effectiveness of payment schemes, and its determinants, we review counterfactual-based empirical evaluations, comparative analyses of case-studies, and meta-analyses. Our review suggests that program effectiveness often lags behind the expectations of early theorists. However, we also find that theory has advanced sufficiently to identify common reasons for why payment schemes fail or succeed. Moreover, payment schemes are often rolled out along with other policy instruments in so-called policy mixes. Advances in theory and evaluation research are needed to improve our understanding of how such policy mixes interact with the targeted social-ecological systems.}, - keywords = {environmental effectiveness,impact evaluation,payments for ecosystem services,policy design,trade-offs}, - file = {/Users/fabio/Zotero/storage/7TH6XWFK/full-text.pdf} -} - -@article{Boschetto2014, - title = {Accuracy Prediction in Fused Deposition Modeling}, - author = {Boschetto, a. and Bottini, L.}, - year = {2014}, - month = may, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {73}, - number = {5-8}, - pages = {913--928}, - issn = {0268-3768}, - doi = {10.1007/s00170-014-5886-4}, - urldate = {2015-03-10}, - keywords = {accuracy,deposition angle,fused deposition modeling,obtainable tolerance,prediction model}, - file = {/Users/fabio/Zotero/storage/RZDUR6WG/Boschetto, Bottini - 2014 - Accuracy prediction in fused deposition modeling.pdf} -} - -@article{Bose2013, - title = {Bone Tissue Engineering Using {{3D}} Printing}, - author = {Bose, Susmita and Vahabzadeh, Sahar and Bandyopadhyay, Amit}, - year = {2013}, - month = dec, - journal = {Materials Today}, - volume = {16}, - number = {12}, - pages = {496--504}, - publisher = {{Elsevier Ltd.}}, - issn = {13697021}, - doi = {10.1016/j.mattod.2013.11.017}, - urldate = {2014-02-20}, - file = {/Users/fabio/Zotero/storage/K55BBY59/Bose, Vahabzadeh, Bandyopadhyay - 2013 - Bone tissue engineering using 3D printing.pdf} -} - -@article{botealonsoMappingSustainabilityCircular2022, - title = {Mapping Sustainability and Circular Economy in Cities: {{Methodological}} Framework from Europe to the {{Spanish}} Case}, - author = {Bote Alonso, Inmaculada and {S{\'a}nchez-Rivero}, M{\'o}nica Victoria and Montalb{\'a}n Pozas, Beatriz}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {357}, - pages = {131870}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131870}, - urldate = {2022-05-23} -} - -@article{boteyPerceivedEmotionalIntelligence2020, - title = {Perceived Emotional Intelligence of University Professors Based on the Nature of the Subject Taught}, - author = {Botey, M. and {Vaquero-Diego}, M. and Sastre, F.J.}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120292}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120292}, - urldate = {2020-09-13} -} - -@article{Bottollier-Depois2012, - title = {{{FabLabs}} , Makerspaces : Entre Nouvelles Formes d'innovation et Militantisme Libertaire}, - author = {{Bottollier-Depois}, Fran{\c c}ois}, - year = {2012}, - pages = {1--130}, - abstract = {Cr\'e\'es il y a plus de dix ans aux \'Etats-Unis par le MIT, les FabLabs commencent \`a se d\'evelopper en France. Ce travail est fond\'e sur une enqu\^ete qualitative men\'ee aupr\`es de diff\'erents makerspaces fran\c{c}ais. Lieux d'innovation, ils permettent aux utilisateurs de fabriquer presque n'importe quoi \`a partir d'outils num\'eriques. Mais au del\`a d'un simple atelier de fabrication, ces makerspaces sont \'egalement des lieux de socialisation \`a une contre-culture. Ouverts en principe \`a tous, ils sont un lieu d'\'echange et de partage de savoirs et de savoir- faire, sans hi\'erarchie ni centralisation mais en lien avec le reste de la communaut\'e des makerspaces. Partisans du libre ou de l'open-source, ils \oe uvrent pour un acc\`es \'egal et libre \`a l'information, mais ce militantisme, peu revendicatif, est "silencieux". Il est davantage dans le faire que dans la critique : c'est en creux, par le contre-mod\`ele et la contre-culture propos\'es qu'on peut lire les nombreuses critiques sociales et \'economiques.}, - file = {/Users/fabio/Zotero/storage/WSL4W7FV/Fablabs et Makerspaces.pdf} -} - -@techreport{Bottollier-Depois2014, - title = {Etat Des Lieux et Typologie Des Ateliers de Fabrication Num\'erique}, - author = {{Bottollier-Depois Francois; Eychenne, Fabien; Jacquelin, Anne; Kaplan, Daniel; Nelson, Jean; Routin}, V{\'e}ronique}, - year = {2014}, - pages = {109}, - urldate = {2022-02-28}, - abstract = {Commen\c{c}ons par une recommandation purement langagi\`ere : nous devons cesser de nommer tous les ateliers ouverts de fabrication num\'erique "Fab Labs". Selon nos contacts \'etrangers, la France serait le seul pays qui a tendance \`a d\'esigner la diversit\'e de ces ateliers sous cette appellation commune, alors que la "charte" des Fab Labs d\'ecrit un type d'atelier pr\'ecis, avec son \'equipement, ses vocations, ses crit\`eres notamment en termes d'ouverture et de partage de l'information\ldots{} En utilisant sans discrimination l'expression "Fab Lab", on peut laisser entendre \`a tort que tous les ateliers de fabrication num\'erique s'inscrivent dans le m\^eme mouvement, partagent la m\^eme charte, s'adressent \`a la m\^eme diversit\'e de participants, poursuivent des buts similaires. Or ce n'est pas le cas et vraisemblablement, \c{c}a le sera de moins en moins. Nous proposons donc d'utiliser une expression d\'elib\'er\'ement neutre : Ateliers de fabrication num\'erique, ou AFN. L'objectif est de viser une appellation g\'en\'erique, qui ne convie pas un sens trop pr\'ecis, et de laisser \`a chaque espace ou r\'eseau d'espaces le choix d'imposer des "marques" plus \'evocatrices : Fab Lab, makerspace, TechShop et, on l'esp\`ere, d'autres noms qui stimulent l'imagination.}, - keywords = {Etude FABLAB}, - file = {/Users/fabio/Zotero/storage/KP6G3X9Z/full-text.pdf} -} - -@article{BoubekriN.andAlqahtani2015, - title = {Economics of {{Additive Manufacturing}}}, - author = {{Boubekri, N. {and} Alqahtani}, M.}, - year = {2015}, - journal = {Int'l Journal of Advances in Mechanical \& Automobile Engg.}, - volume = {2}, - number = {1}, - pages = {12--14}, - doi = {10.15242/IJAMAE.E0915066}, - abstract = {\textemdash One of the technologies that have made mass customization a reality is 3D printing. This permits a high level of customization generating quality products that may require high level of detail. There is no need for inventory or work in process storage and generally requires less post-processing. Considering the immense benefits that this new technology offers, this paper seeks to examine the financial side of additive manufacturing. Specifically, it provides an analysis of the costs and resulting economic benefits of this technology in comparison to traditional manufacturing techniques. Finally, the paper discusses some of the future trends that will make this technology more cost effective.}, - keywords = {\textemdash 3 D printing,Additive Manufacturing,Economics}, - file = {/Users/fabio/Zotero/storage/LJAVNIXX/m-api-4dc868f5-534d-14ff-5cf8-7851b399ef38.pdf} -} - -@article{Boujut2003, - title = {Intermediary {{Objects}} as a Mean to Foster {{Co-operation}}}, - author = {Boujut, J-F. and Blanco, E}, - year = {2003}, - journal = {Engineering Design Computer Supported Cooperative Work}, - number = {1998}, - pages = {205--219}, - issn = {0925-9724}, - keywords = {collaborative design,computer aided design,concurrent engineering,empirical studies,intermediary objects}, - file = {/Users/fabio/Zotero/storage/FYJR39Z3/Intermediary Objects as a Means to Foster Co-operation in Engineering Design.pdf} -} - -@article{Boundy2020, - title = {How Much Material Can a Recycling Facility Source? {{A}} Business-Incentive Based Model for Secondary Material Sourcing Applied to Waste {{LCD}} Screen Material}, - author = {Boundy, Thomas}, - year = {2020}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {152}, - pages = {104528}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104528}, - file = {/Users/fabio/Zotero/storage/Y2AG7TJZ/How much material can a recycling facility source A business-incentive based model for secondary material sourcing applied to waste LCD screen material.pdf} -} - -@inproceedings{Bourell2009, - title = {A Brief History of Additive Manufacturing and the 2009 Roadmap for Additive Manufacturing: Looking Back and Looking Ahead}, - booktitle = {{{US-Turkey Workshop}} on \ldots}, - author = {Bourell, David L Dl and Beaman, Joseph Jb and Leu, Ming C and Rosen, David W}, - year = {2009}, - number = {2}, - pages = {2005--2005}, - abstract = {Additive Manufacturing (AM) has roots in topography and photosculpture which date back almost 150 years. Both of these early technologies might be categorized as manual cut and stack approaches to building a freeformed object in a layerwise fashion. The first successful AM process was effectively a powder deposition method with an energy beam proposed by Ciraud in 1972. Other historical developments in AM will be described in the presentation. Transitioning from the oldest developments in AM to the most recent, earlier this year sixty-five experts in AM gathered in the Washington DC area to develop a research roadmap for AM. The results of that effort are described}, - file = {/Users/fabio/Zotero/storage/9V7UX7U2/m-api-7601bc66-df49-1589-2e0d-2328e953283b.pdf} -} - -@article{Bourell2014, - title = {The {{Roadmap}} for {{Additive Manufacturing}} and {{Its Impact}}}, - author = {Bourell, David and Rosen, David and Leu, Ming}, - year = {2014}, - journal = {3D Printing and Additive Manufacturing}, - volume = {1}, - number = {1}, - pages = {6--9}, - issn = {2329-7662}, - doi = {10.1089/3dp.2013.0002}, - abstract = {Th e 2009 Roadmap for Additive Manufacturing is a 92 - page research agenda looking ahead 10 \textendash{} 15 years. It was the result of a two - day meeting on March 30 \textendash{} 31, 2009, in Washington, D.C., funded by the National Science Foundation and the Offi ce of Naval Research. Th e objective was to develop and articulate a roadmap for research in the area of additive manufacturing for the next 10 \textendash{} 12 years. Th e report addressed the needs and opportunities for technological advance in fi ve areas: design; process modeling and control; materials, processes, and machines; biomedical applications; and energy and sustainability. Th ere have been over 9,000 downloads of the roadmap report. Th e purpose of this article is to list the main fi ndings of the report and to describe some of the signifi cant impacts the report has had on the advancement of additive manufacturing technology.}, - isbn = {2329-7662}, - file = {/Users/fabio/Zotero/storage/2PNACP87/The Roadmap for Additive Manufacturing and Its Impact.pdf} -} - -@article{Bourell2016, - title = {Perspectives on {{Additive Manufacturing}}}, - author = {Bourell, David L.}, - year = {2016}, - journal = {Annual Review of Materials Research}, - volume = {46}, - number = {1}, - pages = {1--18}, - issn = {1070289X}, - doi = {10.1080/1070289X.2012.699879}, - abstract = {Additive manufacturing (AM) has skyrocketed in visibility commercially and in the public sector. This article describes the development of this field from early layered manufacturing approaches of photosculpture, topography, and material deposition. Certain precursors to modern AM processes are also briefly described. The growth of the field over the last 30 years is presented. Included is the standard delineation of AM technologies into seven broad categories. The economics of AM part generation is considered, and the impacts of the economics on application sectors are described. On the basis of current trends, the future outlook will include a convergence of AM fab-ricators, mass-produced AM fabricators, enabling of topology optimization designs, and specialization in the AM legal arena. Long-term developments with huge impact are organ printing and volume-based printing.}, - isbn = {1531-7331}, - keywords = {additive manufacturing,current applications,economics,future,history}, - file = {/Users/fabio/Zotero/storage/S2RTEL4U/Perspectives on Additive Manufacturing.pdf} -} - -@article{Bourell2017, - title = {Materials for Additive Manufacturing}, - author = {Bourell, David and Kruth, Jean Pierre and Leu, Ming and Levy, Gideon and Rosen, David and Beese, Allison M and Clare, Adam}, - year = {2017}, - journal = {CIRP Annals}, - volume = {66}, - number = {2}, - pages = {659--681}, - publisher = {{CIRP}}, - issn = {00078506}, - doi = {10.1016/j.cirp.2017.05.009}, - abstract = {Abstract Critical to the selection requirements for additive manufacturing (AM) is the need for appropriate materials. Materials requirements for AM include the ability to produce the feedstock in a form amenable to the specific AM process, suitable processing of the material by AM, capability to be acceptably post-processed to enhance geometry and properties, and manifestation of necessary performance characteristics in service. As AM has matured, specific classes of material have become associated with specific AM processes and applications. This paper gathers this information for each of the seven categories of ISO/ASTM AM categories. Polymers, metals, ceramics and composites are considered. Microstructural features affecting AM part properties are listed. Service properties of AM parts are described, including physical, mechanical, optical and electrical properties. An additive manufacturability index is proposed.}, - keywords = {Manufacturing,Material,Microstructure}, - file = {/Users/fabio/Zotero/storage/6K2C78A4/Materials for additive manufacturing.pdf} -} - -@article{bourmistrovCreativityProactivityForesight2022, - title = {Creativity, Proactivity, and Foresight}, - author = {Bourmistrov, Anatoli and {\AA}mo, Bj{\o}rn Willy}, - year = {2022}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {174}, - pages = {121215}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121215}, - urldate = {2021-10-28}, - abstract = {This study addresses how foresight interventions can translate creativity into proactive behavior and, in this sense, foster anticipatory strategic management. We develop a theoretical model, linking creativity and proactivity with known discrete individual foresight cognitive styles, namely ``Reactor'', ``Tester'', ``Adapter'', and ``Framer'', but also add a new ``Actor'' dimension. The theoretical model is tested by analyzing quantitative data from 172 students attending two scenario-building workshops. Our SEM model allows us to formulate three conclusions. First, creativity is not directly linked to proactivity without considering individual foresight cognitive styles. Second, we confirm the presence of four components of foresight as discrete foresight cognitive styles but also demonstrate the importance of a fifth component, the ``Actor''. Third, it is only through the ``Tester'', ``Adapter'', and ``Actor'' components that creative energy most significantly aids proactivity. This means that creativity most significantly aids proactivity when individuals are either able to experiment with alternative courses of action or change the conditions for how their respective futures may unfold. We contribute to the foresight literature by demonstrating how foresight, as a process of intervention, can foster discrete foresight cognitive styles at the individual level and moderate relationships between creativity and proactivity.}, - keywords = {Anticipatory strategic management,Creativity,Discrete foresight cognitive styles,Foresight,Proactivity}, - file = {/Users/fabio/Zotero/storage/JFQ6RFNI/full-text.pdf} -} - -@article{Bouvier-Patron2015, - title = {{{FabLab}} et Extension de La Forme R\'eseau : Vers Une Nouvelle Dynamique Industrielle ?}, - author = {{Bouvier-Patron}, Paul}, - year = {2015}, - journal = {Innovations}, - volume = {47}, - number = {2}, - pages = {165}, - issn = {1267-4982}, - doi = {10.3917/inno.047.0165} -} - -@article{Bovea2021, - title = {How Do Organisations Graphically Communicate Their Sustainability? {{An}} Exploratory Analysis Based on Corporate Reports}, - author = {Bovea, Mar{\'i}a D and {P{\'e}rez-Belis}, Victoria and {Torca-Adell}, Laura and {Ib{\'a}{\~n}ez-For{\'e}s}, Valeria}, - year = {2021}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {28}, - pages = {300--314}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.04.011}, - urldate = {2021-05-03} -} - -@article{Bowyer2014, - title = {{{3D Printing}} and {{Humanity}}'s {{First Imperfect Replicator}}}, - author = {Bowyer, Adrian}, - year = {2014}, - month = mar, - journal = {3D Printing and Additive Manufacturing}, - volume = {1}, - number = {1}, - pages = {4--5}, - issn = {2329-7662}, - doi = {10.1089/3dp.2013.0003} -} - -@article{Boyard2014, - title = {A Design Methodology for Parts Using {{Additive Manufacturing}}}, - author = {Boyard, N. and Rivette, M. and Christmann, O. and Richir, S.}, - year = {2014}, - journal = {High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013}, - pages = {399--404}, - abstract = {Additive Manufacturing (AM) allows designer to sidestep several design requirements and to create free forms, hollow parts or direct assemblies. This process also allows direct recycling of plastic into new parts, which eases the raw material supply. However, although several methodologies are used to redesign products and parts, none is dedicated to a real design of parts and products in AM. At first, we will suggest the base of a new design methodology for an end-user who wants to create a product or a part in AM. Then, we will show an example of using our methodology. Finally, we will conclude on the limits of this methodology and on our next work to validate our methodology. \textcopyright{} 2014 Taylor \& Francis Group.}, - isbn = {9781138001374}, - file = {/Users/fabio/Zotero/storage/DA9SRJGU/A design methodology for parts using Additive Manufacturing.pdf} -} - -@article{Boyard2015, - title = {A Design Methodology for Parts Using Additive Manufacturing {{To}} Cite This Version : {{Science Arts}} \& {{M\'etiers}} ( {{SAM}} )}, - author = {Boyard, Nicolas and Christmann, Olivier and Richir, Simon and Boyard, Nicolas and Christmann, Olivier and Richir, Simon}, - year = {2015} -} - -@article{Bozhikin2019, - title = {The Role of Government and Key Non-State Actors in Social Entrepreneurship: {{A}} Systematic Literature Review}, - author = {Bozhikin, Ivan and Macke, Janaina and {da Costa}, Luana Folchini}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {226}, - pages = {730--747}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.076}, - urldate = {2020-05-21}, - abstract = {Social entrepreneurship is recognized as a key tool for overcoming social problems in society and supporting sustainable development. While social entrepreneurship is not a new phenomenon, the field has experienced significant growth over the past 15 years, either when applied to social problem-solving in a traditional way, or focused on private-sector entrepreneurship and large-scale transformation. However, there is still a lack of scientific review papers examining various government regulatory mechanisms, implemented on different government levels for stimulating social entrepreneurship and social entrepreneurship ecosystems. This study aims to analyze the state-of-the-art of social entrepreneurship and its relation with government and key non-state actors. Following Pittaway et al. (2014) and Cerchione et al. (2018), a systematic literature review was carried out using the Scopus database, covering the period from 2001 up to 20th of March 2018, which resulted in a corpus of 478 scientific articles. The papers were ranked by the number of citations, according to the Web of Science\textregistered{} database, from which were selected the 102 most representative works. The abstracts of these selected studies were organized and submitted into an analysis of content via the 2015 edition of Alceste\textregistered{} software. Following the reading of all sources, the papers were classified and a matrix of data was produced, which allowed the descriptive analysis. The results show that there are at least six levels of government intervention to facilitate the development of social entrepreneurship. It also identified 4 directions taken by the government in support of social entrepreneurship, and 11 regulatory mechanisms, both of which could be deepened in future studies. The role of key non-state actors in the social entrepreneurship field has also been discussed. Based on the study, a future research agenda on the topic has been defined in the following directions: (i) a combination and coordination of regulatory mechanisms for better stimulation of social entrepreneurship, (ii) government policy oriented to the whole social entrepreneurship ecosystem, (iii) social capital, (iv) business models for social entrepreneurship ecosystems and government support.}, - keywords = {Cooperation,Government,Non-state actors,Social entrepreneurship,Systematic literature review} -} - -@phdthesis{Braanker2010, - title = {Developing a Plastics Recycling Add-on for the {{RepRap 3D}} Printer}, - author = {Braanker, G B and Flohil, J J and Tokaya, G E}, - year = {2010}, - journal = {Defl University of Technology}, - urldate = {2015-06-02}, - school = {Defl University of Technology}, - file = {/Users/fabio/Zotero/storage/TCSLB7PB/Braanker, Flohil, Tokaya - 2010 - Developing a plastics recycling add-on for the RepRap 3D printer.pdf} -} - -@article{braatEcosystemServicesAgenda2012, - title = {The Ecosystem Services Agenda:Bridging the Worlds of Natural Science and Economics, Conservation and Development, and Public and Private Policy}, - author = {Braat, Leon C. and {de Groot}, Rudolf}, - year = {2012}, - month = jul, - journal = {Ecosystem Services}, - volume = {1}, - number = {1}, - pages = {4--15}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2012.07.011}, - urldate = {2021-04-23}, - abstract = {The Ecosystem Services Journal starts in 2012 with a formidable basis in the reports and books from the Millennium Ecosystem Assessment and TEEB projects. Following a half-century history of growing awareness and associated scientific based policy development a bridging concept with natural and social science notions was developed and coined "ecosystem services". The agenda for the journal Ecosystem Services, presented in this introductory paper to the Journal Ecosystem Services is aimed at scientists and policy analysts who consider contributing to better knowledge and better use of that knowledge about ecosystem services. This should include knowledge of the ecological systems that provide the services, the economic systems that benefit from them, and the institutions that need to develop effective codes for a sustainable use. The agenda is derived from the experience of the authors in science and policy analysis and extended with some of the recommendations from the TEEB book for national and international policy making emphasising the science-policy-practice linkage, which is the philosophy of the Journal. \textcopyright{} 2012 Elsevier B.V.}, - keywords = {Agenda,Economics,Ecosystem services,Policy,Practice,Science}, - file = {/Users/fabio/Zotero/storage/6AS9NH6K/full-text.pdf} -} - -@article{Braconnier2020, - title = {Processing Parameter Correlations in Material Extrusion Additive Manufacturing}, - author = {Braconnier, Daniel J. and Jensen, Robert E. and Peterson, Amy M.}, - year = {2020}, - month = jan, - journal = {Additive Manufacturing}, - volume = {31}, - pages = {100924}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100924} -} - -@article{bracqueneQuantifyingEnvironmentalImpact2021, - title = {Quantifying the Environmental Impact of Clustering Strategies in Waste Management: {{A}} Case Study for Plastic Recycling from Large Household Appliances}, - author = {Bracquen{\'e}, Ellen and Martinez, Mariana Gaspar and Wagner, Eduard and Wagner, Florian and Boudewijn, Alexander and Peeters, Jef and Duflou, Joost}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {126}, - pages = {497--507}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2021.03.039}, - urldate = {2021-04-29}, - abstract = {The complex composition of waste electrical and electronic equipment (WEEE) plastics represents a challenge during post-consumption plastic recycling. A single WEEE category, e.g. large household appliances (LHA), can contain several different plastic types with overlapping material properties, making the sorting of individual plastics a challenge. Significant increases in plastic recovery rates can be expected by clustering product categories, as clustering can avoid mixing of non-compatible plastics with overlapping material properties. For this purpose, a life cycle assessment (LCA) is conducted to investigate the influence of different clustering strategies on the environmental performance of waste treatment and the production of recycled plastic from LHA waste stream. To assure comparability between waste treatment scenarios a system expansion approach is applied, and to allocate the burden of shared processes over the first and second use cycle of the material partitioning is applied. Results show that an increased separation of product clusters by plastic type can improve the plastic recovery rate from 5.8\% to 47.1\% and reduce the overall environmental impact, quantified with the ReCiPe (2016) method, by up to 23\%. The environmental impacts of using recycled plastics from LHA waste can be reduced by 27 to 38\% compared to single-use plastic. The holistic approach used in this study demonstrates (1) the potential benefits of implementing product clustering strategies for LHA plastic recycling, (2) the relevance of different allocation procedures when integrating recycling into an LCA, (3) the importance of using less virgin material and avoiding final waste treatment, and (4) the limitation of the recycling system to reduce the environmental burden associated with products.}, - keywords = {Environmental impacts,Life cycle assessment,Plastic recycling,Waste electrical and electronic equipment} -} - -@article{Brajlih2011, - title = {Speed and Accuracy Evaluation of Additive Manufacturing Machines}, - author = {Brajlih, Tomaz and Valentan, Bogdan and Balic, Joze and Drstvensek, Igor}, - year = {2011}, - journal = {Rapid Prototyping Journal}, - volume = {17}, - number = {1}, - pages = {64--75}, - issn = {1355-2546}, - doi = {10.1108/13552541111098644}, - urldate = {2014-02-25}, - keywords = {accuracy,electric machines,manufacturing industries,paper type research paper,production engineering,slovenia,velocity}, - file = {/Users/fabio/Zotero/storage/4FPIIR4N/Speed and accuracy evaluation of additive manufacturing machines.pdf} -} - -@article{Brandao2020, - title = {Corrigendum to {{Shaping}} ``{{Portuguese}} Science Policy for the {{European}} Horizon: {{The}} Discourses of Technological Change'' [{{Technological Forecasting}} \& {{Social Change 113PB}} (2016) 168 \textendash{} 184]}, - author = {Brand{\~a}o, Tiago}, - year = {2020}, - month = mar, - journal = {Technological Forecasting and Social Change}, - volume = {152}, - pages = {119890}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119890} -} - -@article{Brander2018, - title = {Editorial {{Board}}}, - author = {Brander, L}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {i}, - issn = {22120416}, - doi = {10.1016/s2212-0416(18)30093-7}, - file = {/Users/fabio/Zotero/storage/IW8EFHDS/Editorial-Board_2018_Ecosystem-Services.pdf} -} - -@article{brandstromComparisonCircularityMetrics2022, - title = {Comparison between Circularity Metrics and {{LCA}}: {{A}} Case Study on Circular Economy Strategies}, - shorttitle = {Comparison between Circularity Metrics and {{LCA}}}, - author = {Br{\"a}ndstr{\"o}m, Johan and Saidani, Michael}, - year = {2022}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {371}, - pages = {133537}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133537}, - urldate = {2022-09-18}, - abstract = {The concept of circular economy consists of a wide range of strategies that aim to reduce the environmental impact of production systems and consumption patterns through increased circularity of resources. Circularity is mostly associated with material efficiency strategies that either close, slow or narrow loops, and a multitude of circularity metrics have been developed to evaluate the efficiency of such strategies. Relatively little effort has been made to quantitatively assess the connection between circularity, material efficiency, and environmental sustainability. More knowledge is required about how material-based circularity metrics can be used to guide practitioners of the circular economy towards strategies that foster environmental sustainability. In this study, a novel structured approach is adopted to perform such a comparison by including closing, slowing, and narrowing strategies on a lawn mowing case. Four circularity metrics that can capture material strategies throughout product value chains (Material Efficiency Metric, Material Circularity Indicator, Circularity Potential Indicator and Circular Economy Indicator Prototype) are compared to three complementary midpoint categories using Life Cycle Assessment (Global Warming Potential, Material Resource Scarcity, and Human Non-Carcinogenic Toxicity). The results show that the studied circularity metrics generate accurate results when evaluating Material Resource Scarcity and that they rank the material efficiency strategies equally with all environmental impact categories. The circularity metrics are unable to capture the benefits of reduced energy and the correspondence to all impact categories is lower in scenarios with higher energy use. We conclude that the strength of the studied circularity metrics is twofold: i) promoting solutions that reduce material demand and waste creation and ii) highlighting the advantages of combining complementary circularity strategies. This research shows that the material-based circularity metrics can be valuable guidance tools for practitioners of circular economy, as they do not require methodological expertise and can align the results with Life Cycle Assessments in some specific situations. More comparisons between circularity metric results and Life Cycle Assessments are needed in future research to establish state-of-the-art circularity metrics for specific situations and purposes, including energy-focused circularity metrics.}, - langid = {english}, - keywords = {Case study,Circular economy,Circular economy loops,Circularity metrics,Industrial value chain,Life cycle assessment}, - file = {/Users/fabio/Zotero/storage/JGKSTGEX/Brändström_Saidani_2022_Comparison between circularity metrics and LCA.pdf;/Users/fabio/Zotero/storage/JNBF74SF/S0959652622031171.html} -} - -@article{brandstromHowCircularValue2022, - title = {How Circular Is a Value Chain? {{Proposing}} a {{Material Efficiency Metric}} to Evaluate Business Models}, - author = {Br{\"a}ndstr{\"o}m, Johan and Eriksson, Ola}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {342}, - pages = {130973}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130973}, - urldate = {2022-03-08}, - abstract = {The concept of Circular Economy is a principle aiming to improve sustainable development by reducing resource use and impact on ecological systems. An increasing number of companies are applying this theory on design strategies and business models in order to close, slow and narrow material loops. To highlight the importance, guide practitioners, and evaluate the progress of circular economy, a high number of circularity metrics (C-metrics) have been developed. However, little attention has been given to creating a connection between quantification of circularity and environmental performance. Existing metrics also do not highlight the interplay between micro (product), meso (industrial symbiosis), and macro (regional) level circularity. Moreover, existing metrics do not capture all material loops and do not adopt a value chain perspective on material flows. To improve the connection between C-metrics and environmental performance, a framework connecting circular economy strategies and material flows was developed. Based on this framework, a material flow-based C-metric was designed aimed at converting mechanisms of closing, narrowing and slowing material loops into a single-point value. To evaluate its feasibility, the metric was tested on three circular business models that represent all three mechanisms in a value chain perspective. The results showed that the metric is feasible in more situations than existing metrics and that the circularity value is highly dependent on assumptions. In future studies, the metric should be tested and compared to Life Cycle Assessments on multiple system levels to ensure that it generates valid results. Furthermore, user input assumptions should be standardized to ensure metric reliability.}, - keywords = {Circular business model,Circular economy,Circularity metric,Material flow visualization,System analysis,Value chain}, - file = {/Users/fabio/Zotero/storage/GDFK5RH7/full-text.pdf} -} - -@article{Brankaert2017, - title = {The Design-Driven Living Lab: A New Approach to Exploring Solutions to Complex Societal Challenges}, - author = {Brankaert, Rens and Den Ouden, Elke}, - year = {2017}, - journal = {Technology Innovation Management Review}, - volume = {7}, - number = {1}, - pages = {44--51}, - abstract = {Ouden, P. H. (2017). The design-driven living lab: a new approach to exploring solutions to complex societal challenges. Technology Innovation Management Review, 7(1), 44-51. General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.} -} - -@article{brassettAnticipatingWorkBe2021, - title = {Anticipating the Work to Be Done}, - author = {Brassett, Jamie}, - year = {2021}, - doi = {10.1016/j.futures.2021.102851}, - urldate = {2021-11-06}, - file = {/Users/fabio/Zotero/storage/HXSKCPBE/full-text.pdf} -} - -@article{Braziotis2019, - title = {{{3D}} Printing Strategic Deployment: The Supply Chain Perspective}, - author = {Braziotis, Christos and Rogers, Helen and Jimo, Ajeseun}, - year = {2019}, - month = may, - journal = {Supply Chain Management: An International Journal}, - volume = {24}, - number = {3}, - pages = {397--404}, - issn = {1359-8546}, - doi = {10.1108/SCM-09-2017-0305} -} - -@article{Bredikhin2020, - title = {Approaches to Disruptive Change: {{The}} Contribution of Complexity Science to Futures Studies}, - author = {Bredikhin, Sergey}, - year = {2020}, - month = dec, - journal = {Futures}, - volume = {124}, - pages = {102624}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102624}, - urldate = {2020-09-01}, - abstract = {We set out to establish the place of Weak Signals at the conceptual intersection between the fields of futures and complexity studies as a qualitative counterpart to the so-called Early Warning Signals (of regime shift). After briefly presenting the scope of the Weak Signal concept and associated problems with positioning such a controversial construct against the complexity field, we investigate how theoretical and practical implications of studying qualitative changes in a complex system's state allow for particular classes of phenomena to announce impactful events in advance. Finally, we reflect on the prospective ways of augmenting the Weak Signals concept by fusing it with the notion of Early Warning Signals and the consequent opportunities provided by bridging the fields of complexity and futures studies.}, - keywords = {Critical transitions,Early warning signals,Tipping points,Weak signals,Wild cards} -} - -@article{Brem2020, - title = {Creativity, {{Innovation}}, {{Sustainability}}: {{A Conceptual Model}} for {{Future Research Efforts}}}, - author = {Brem, Alexander and {Puente-D{\'i}az}, Rogelio}, - year = {2020}, - month = apr, - journal = {Sustainability}, - volume = {12}, - number = {8}, - pages = {3139}, - publisher = {{MDPI AG}}, - issn = {20711050}, - doi = {10.3390/su12083139}, - urldate = {2020-05-21}, - abstract = {The interaction of creativity, innovation and sustainability is gaining momentum, but a lot more research is necessary. Some potential (not binding) areas of investigation for creativity and innovation are novel and useful conceptual definitions and theoretical framings of sustainability, as well as ideas for how to solve environmental and social problems with implications for sustainability. In addition, there is a high need for different methodological approaches to conduct research on sustainability, which might come from different fields like sociology or engineering. Before this background, this article introduces a conceptual framing of creativity, innovation and sustainability.}, - file = {/Users/fabio/Zotero/storage/TNSIUSIZ/full-text.pdf} -} - -@article{Brem2020a, - title = {Implications of the Coronavirus ({{COVID-19}}) Outbreak for Innovation: {{Which}} Technologies Will Improve Our Lives?}, - author = {Brem, Alexander and Viardot, Eric and Nylund, Petra A}, - year = {2021}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {163}, - eprint = {33191956}, - eprinttype = {pubmed}, - pages = {120451}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120451}, - urldate = {2020-11-21}, - abstract = {In contrast to earlier coronavirus diseases such as SARS or MERS, whose impact was largely limited to specific regions of the world, the novel coronavirus, COVID-19, is affecting people across the globe. This article analyzes the effects of this worldwide phenomenon on certain technologies and how this may improve our lives. It presents technologies that relate directly to the treatment of the virus as well as those that have been used to adapt to living under this crisis. Given that such a pandemic will likely affect humanity again, this article also highlights how these technologies may prove helpful in the future. To this end, technological challenges, related innovation logics, and their social impacts are discussed.}, - pmid = {33191956}, - keywords = {COVID-19,Forecasting,Innovation,Pandemic,Technological change}, - file = {/Users/fabio/Zotero/storage/TBLXQD8J/full-text.pdf} -} - -@article{bremAreYouActing2020, - title = {Are You Acting Sustainably in Your Daily Practice? {{Introduction}} of the {{Four-S}} Model of Sustainability}, - author = {Brem, Alexander and {Puente-D{\'i}az}, Rogelio}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {267}, - pages = {122074}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122074}, - urldate = {2020-05-27} -} - -@article{Brenken2017, - title = {Fused Filament Fabrication of Fiber-Reinforced Polymers: {{A}} Review}, - author = {Brenken, Bastian and Barocio, Eduardo and Favaloro, Anthony and Kunc, Vlastimil and Pipes, R. Byron}, - year = {2018}, - month = may, - journal = {Additive Manufacturing}, - volume = {21}, - number = {2010}, - pages = {1--16}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2018.01.002}, - keywords = {additive manufacturing,deposition,extrusion,fused deposition modeling,fused filament fabrication,polymer composite materials}, - file = {/Users/fabio/Zotero/storage/S3QTR4Y4/Fused filament fabrication of fiber-reinforced polymers A review.pdf} -} - -@article{breschiSTEMMigrationResearch2020, - title = {{{STEM}} Migration, Research, and Innovation}, - author = {Breschi, Stefano and Lawson, Cornelia and Lissoni, Francesco and Morrison, Andrea and Salter, Ammon}, - year = {2020}, - month = jul, - journal = {Research Policy}, - pages = {104070}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104070}, - urldate = {2020-08-09} -} - -@article{Breslin1998, - title = {Long-Term Engineering Properties of Recycled Plastic Lumber Used in Pier Construction}, - author = {Breslin, Vincent T. and Senturk, Ufuk and Berndt, Christopher C.}, - year = {1998}, - journal = {Resources, Conservation and Recycling}, - volume = {23}, - number = {4}, - pages = {243--258}, - issn = {09213449}, - doi = {10.1016/S0921-3449(98)00024-X}, - abstract = {Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260??30 MPa), dimensional stability and the Shore D surface hardness (60??2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45\% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications. Copyright (C) 1998 Elsevier Science B.V.}, - isbn = {0921-3449}, - keywords = {Engineering testing,Piers,Plastic,Plastic lumber,Recycling}, - file = {/Users/fabio/Zotero/storage/KMBN6S4R/Breslin, Senturk, Berndt - 1998 - Long-term engineering properties of recycled plastic lumber used in pier construction.pdf} -} - -@article{bressaninTechnoeconomicEnvironmentalAssessment2022, - title = {Techno-Economic and Environmental Assessment of Polylactic Acid Production Integrated with the Sugarcane Value Chain}, - author = {Bressanin, J{\'e}ssica Marcon and {de Mesquita Sampaio}, Isabelle Lobo and Geraldo, Victor Coelho and Klein, Bruno Colling and Chagas, Mateus Ferreira and Bonomi, Antonio and Filho, Rubens Maciel and Cavalett, Ot{\'a}vio}, - year = {2022}, - month = sep, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2022.09.009}, - urldate = {2022-09-18}, - abstract = {In the global pursuit of sustainable production and cleaner consumption strategies, bio-based plastics have been increasingly developed, produced, and used in the field of renewable materials. This study performs techno-economic and environmental assessments of polylactic acid (PLA) produced via lactic acid from sugarcane juice fermentation in integration with a typical Brazilian ethanol distillery. PLA presents net negative GHG emissions: -0.25\,kg\,CO2\,eq./kg PLA from cradle to factory gate. It shows lower environmental scores than traditional fossil-based plastics in global warming and fossil resource scarcity categories. However, it reveals the highest impacts in terrestrial acidification and land occupation due to sugarcane cultivation. PLA from this study also presents a smaller global warming potential in comparison to other PLA cited in the literature since the energy demand from all industrial stages is supplied by sugarcane bagasse and straw combustion. Production cost is estimated at US\$ 1.41/kg PLA in a venture that reaches an Internal Rate of Return of 29.4\,\%. PLA's minimum selling price of US\$ 1.58/kg is lower than the stipulated US\$ 2.66/kg market price. The attractive environmental results coupled with this competitive economic performance show that the proposed route can contribute to sustainable production within the plastics sector.}, - langid = {english}, - keywords = {Bio-based plastic,Life cycle assessment,Polylactic acid,Sugarcane biorefinery,Techno-economic assessment}, - file = {/Users/fabio/Zotero/storage/MLC74UY5/S2352550922002494.html} -} - -@article{Briassoulis2013, - title = {Technical Specifications for Mechanical Recycling of Agricultural Plastic Waste}, - author = {Briassoulis, D. and Hiskakis, M. and Babou, E.}, - year = {2013}, - journal = {Waste Management}, - volume = {33}, - number = {6}, - pages = {1516--1530}, - publisher = {{Elsevier Ltd}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2013.03.004}, - abstract = {Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plastic waste management chain. They constitute the base for the best economical and environmental valorisation of the APW. The analysis of the APW streams conducted across Europe in the framework of the European project ". LabelAgriWaste" revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process ("Quality I") and another one for plastic profile production process ("Quality II"). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities in protected cultivations in Europe. The adoption of the proposed specifications could transform this waste stream into a labelled commodity traded freely in the market and will constitute the base for the best economical and environmental valorisation of the APW. \textcopyright{} 2013 Elsevier Ltd.}, - pmid = {23561796}, - keywords = {Agricultural plastic waste,Mechanical recycling,Recycling quality of plastic waste,Recycling technical specifications}, - file = {/Users/fabio/Zotero/storage/2396RYAU/Briassoulis, Hiskakis, Babou - 2013 - Technical specifications for mechanical recycling of agricultural plastic waste.pdf} -} - -@article{briguglioTaxingHouseholdWaste2021, - title = {Taxing Household Waste: Intended and Unintended Consequences}, - author = {Briguglio, Marie}, - year = {2021}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {304}, - pages = {127034}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127034}, - urldate = {2021-04-29} -} - -@article{brionAutomatedRecognitionCorrection2022, - title = {Automated Recognition and Correction of Warp Deformation in Extrusion Additive Manufacturing}, - author = {Brion, Douglas A.J. and Shen, Matthew and Pattinson, Sebastian W.}, - year = {2022}, - month = aug, - journal = {Additive Manufacturing}, - volume = {56}, - pages = {102838}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102838}, - urldate = {2022-05-30} -} - -@article{Brisepierre2014d, - title = {L'impens\'e {{Des Usages}}}, - author = {Brisepierre, Ga{\"e}tan and Grandcl{\'e}ment, Catherine and Renauld, Vincent}, - year = {2014}, - journal = {M3 - Soci\'et\'e urbaine et action publique Pour penser les mutations}, - number = {7 Printemps/Et\'e}, - pages = {67--69}, - abstract = {L'appropriation des b\^atiments verts, leur bon usage, conditionnent leur efficacit\'e m\^eme. Changeons de regard et privil\'egions les compromis socio-techniques contre la p\'edagogie verticale.} -} - -@inproceedings{Brissel2013c, - title = {Contribution to Setting up a Sustainable Learning in an Eco-Neighborhood Development Plan Based on ``{{Serious}} Game''}, - booktitle = {2013 {{International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}}) \& {{IEEE International Technology Management Conference}}}, - author = {Brissel, Lamia and Morel, Laure and Dupont, Laurent}, - year = {2013}, - pages = {1--14}, - publisher = {{IEEE}}, - address = {{The Hague, The Netherlands}}, - doi = {10.1109/ITMC.2013.7352607}, - abstract = {International policies to reduce global warming impact directly on territorial strategies concerning decision making on urban development projects. It is thus necessary for local authorities to adopt the best practices, and to take informed decisions in order to move towards more sustainable urban development projects. But today the challenge lies in the involvement of all the stakeholders in the project, each with specific needs and different points of view in a given context. Thereby learning and awareness for sustainable development is necessary. This research helps to highlight the appropriate tools that meet these challenges of education and learning for sustainable development leading towards a shared vision for all stakeholders. ``Serious games'' seem to be a relevant trail of investigation and development.}, - isbn = {978-1-4673-7383-8}, - keywords = {learning process,serious games,sustainable development,urban development project} -} - -@article{Brito2019, - title = {Developing a Green City Assessment System Using Cognitive Maps and the {{Choquet Integral}}}, - author = {Brito, Ver{\'o}nica T.F. and Ferreira, Fernando A.F. and {P{\'e}rez-Gladish}, Blanca and Govindan, Kannan and {Meidut{\.e}-Kavaliauskien{\.e}}, Ieva}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {218}, - pages = {486--497}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.01.060} -} - -@article{Brizga2020, - title = {The {{Unintended Side Effects}} of {{Bioplastics}}: {{Carbon}}, {{Land}}, and {{Water Footprints}}}, - author = {Brizga, Janis and Hubacek, Klaus and Feng, Kuishuang}, - year = {2020}, - month = jul, - journal = {One Earth}, - volume = {3}, - number = {1}, - pages = {45--53}, - publisher = {{Cell Press}}, - issn = {25903322}, - doi = {10.1016/j.oneear.2020.06.016}, - urldate = {2021-07-20}, - abstract = {The environmental impacts of plastics have become an important political and academic topic. One of the main applications of plastics is packaging, a product with a very short service life, leading to a wide range of environmental problems. In this Perspective, we look at the potential environmental consequences (in terms of greenhouse gas emissions and land and water footprints) of substitution of petrochemical plastics used for packaging in Europe with bioplastics. The research is based on a review of life cycle impact assessment studies and additional calculations to assess the footprints of this substitution. The results demonstrate that currently it does not seem feasible to replace all the petrochemical plastic packaging with bioplastic because this will inevitably result in a considerable increase of land and water use. Unless we find ways to decrease plastic demand, most of the efforts to stop plastic pollution are likely to prove temporary and inadequate.}, - keywords = {bioplastics,carbon footprint,land footprint,water footprint}, - file = {/Users/fabio/Zotero/storage/MWF49AW4/full-text.pdf} -} - -@article{broadstockPathwaysCarbonNeutrality2021, - title = {Pathways to Carbon Neutrality: {{Challenges}} and Opportunities}, - author = {Broadstock, David and Ji, Qiang and Managi, Shunsuke and Zhang, Dayong}, - year = {2021}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {169}, - pages = {105472}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105472}, - urldate = {2021-02-14}, - file = {/Users/fabio/Zotero/storage/BJQTAE5E/full-text.pdf} -} - -@article{Brooks2018, - title = {The {{Chinese}} Import Ban and Its Impact on Global Plastic Waste Trade}, - author = {Brooks, Amy L. and Wang, Shunli and Jambeck, Jenna R.}, - year = {2018}, - month = jun, - journal = {Science Advances}, - volume = {4}, - number = {6}, - pages = {eaat0131}, - issn = {2375-2548}, - doi = {10.1126/sciadv.aat0131}, - file = {/Users/fabio/Zotero/storage/NMCMJLJ3/The Chinese import ban and its impact on global plastic waste trade.pdf} -} - -@article{broringInnovationTypesBioeconomy2020, - title = {Innovation Types in the Bioeconomy}, - author = {Br{\"o}ring, Stefanie and Laibach, Natalie and Wustmans, Michael}, - year = {2020}, - journal = {Journal of Cleaner Production}, - volume = {266}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121939}, - abstract = {Many factors such as fossil resource scarcity and new technological developments have brought the bioeconomy, an economy based on the use of biomass or bio-based processes, into the focus. Although many authors and national strategies view bioeconomy innovations as a key for a sustainable economy transition, a conceptual framework that describes innovation types (ITs) in the bioeconomy profoundly is lacking, thus challenging the successful development of technology and innovation management (TIM) strategies and research. Against this backdrop, we aim to fill this gap by conceptualizing four ITs specific to the bioeconomy, namely I) Substitute Products, II) New (bio-based) Processes, III) New (bio-based) Products, and IV) New Behavior. These types are discussed against existing frameworks dealing with sustainability-oriented innovations (SOIs) emphasizing the particularities of the bioeconomy. Moreover, we derive implications for each type as commercialization challenges that are discussed with bioeconomy experts from natural sciences and economics to improve the external validity of the proposed typology. In total, this is the first approach to conceptualize innovation types in the bioeconomy, filling the structural void in bioeconomy research and innovation management. The here presented typology can be applied as a guiding principle for future research avenues, monitoring the evolution of the bioeconomy as well to design innovation strategies by researchers, policy makers and managers.}, - keywords = {Bio-based production,Bioeconomy,Circular economy,Innovation types,Sustainability,Sustainability-oriented innovation}, - file = {/Users/fabio/Zotero/storage/3P3Y7V2J/Innovation types in the bioeconomy.pdf} -} - -@inproceedings{Brotman2015, - title = {Building {{Change}}}, - booktitle = {Proceedings of the 33rd {{Annual ACM Conference}} on {{Human Factors}} in {{Computing Systems}} - {{CHI}} '15}, - author = {Brotman, Ryan and Burleson, Winslow and Forlizzi, Jodi and Heywood, William and Lee, Jisoo}, - year = {2015}, - pages = {3083--3092}, - publisher = {{ACM}}, - address = {{New York, NY}}, - doi = {10.1145/2702123.2702602}, - isbn = {978-1-4503-3145-6} -} - -@article{Brouwer2019, - title = {The Impact of Collection Portfolio Expansion on Key Performance Indicators of the {{Dutch}} Recycling System for {{Post-Consumer Plastic Packaging Waste}}, a Comparison between 2014 and 2017}, - author = {Brouwer, Marieke and Picuno, Caterina and {Thoden van Velzen}, Eggo U. and Kuchta, Kerstin and De Meester, Steven and Ragaert, Kim}, - year = {2019}, - month = dec, - journal = {Waste Management}, - volume = {100}, - pages = {112--121}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.09.012} -} - -@article{Brown1993, - title = {Plastics Packaging of Food Products: The Environmental Dimension}, - author = {Brown, David}, - year = {1993}, - journal = {Trends in Food Science and Technology}, - volume = {4}, - number = {9}, - pages = {294--300}, - issn = {09242244}, - doi = {10.1016/0924-2244(93)90073-J}, - abstract = {There is no single answer to the need for environmentally responsible food packaging. The design of an optimum solution in any particular case should be based upon a quantitative appraisal of product life cycle, and should consider the basic options of 'reduce', 'reuse', 'recycle' and 'recover'. Progress continues in reducing the environmental impact of plastics packaging for food products, and is illustrated here by the specific case of polypropylene-based snack food packaging. ?? 1993.}, - isbn = {0924-2244}, - file = {/Users/fabio/Zotero/storage/GDXR57RK/Brown - 1993 - Plastics packaging of food products the environmental dimension.pdf} -} - -@article{Brown2015, - title = {Interdisciplinarity: {{How}} to Catalyse Collaboration}, - author = {Brown, Rebekah R. and Deletic, Ana and Wong, Tony H.F.}, - year = {2015}, - month = sep, - journal = {Nature}, - volume = {525}, - number = {7569}, - pages = {315--317}, - publisher = {{Nature Publishing Group}}, - issn = {14764687}, - doi = {10.1038/525315a}, - urldate = {2020-03-14}, - file = {/Users/fabio/Zotero/storage/ZB2HRK5V/full-text.pdf} -} - -@article{Brown2019, - title = {Common Problems with the Conventional Design of Crutches: {{Proposing}} a Safer Design and Discussing the Potential Impact}, - author = {Brown, Suzana and Vairis, Achilles and Masoumifar, Ali M. and Petousis, Markos}, - year = {2019}, - month = nov, - journal = {Technology in Society}, - pages = {101215}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.101215} -} - -@article{browningAddressingChallengesAssociated2021, - title = {Addressing the Challenges Associated with Plastic Waste Disposal and Management in Developing Countries}, - author = {Browning, Shelby and {Beymer-Farris}, Betsy and Seay, Jeffrey R}, - year = {2021}, - month = jun, - journal = {Current Opinion in Chemical Engineering}, - volume = {32}, - pages = {100682}, - issn = {2211-3398}, - doi = {10.1016/j.coche.2021.100682}, - urldate = {2023-08-31}, - abstract = {The issue of unmanaged and mismanaged plastic waste is especially acute in developing countries, where the infrastructure for collection, reuse and recycling is often insufficient or lacking. This crisis is now exacerbated by growing imports of plastic waste from the developed world in response to China's ban on plastic waste imports. For the developing world, successful strategies must address the diverse and context-specific technological, social, political, ecological, and economic challenges in each place where they are implemented. The concept of the circular economy is gaining widespread attention as a suitable solution. However, it is not a panacea as implementation requires sophisticated supply chain infrastructure. We argue that solutions meeting these specific challenges are embodied in the principle of Locally Managed Decentralized Circular Economy which is based on applying principles of appropriate technology to utilize locally available raw materials to produce goods with a local market, using locally available resources.}, - file = {/Users/fabio/Zotero/storage/XK484FFP/Browning et al_2021_Addressing the challenges associated with plastic waste disposal and management.pdf;/Users/fabio/Zotero/storage/XFTVNFBV/S2211339821000149.html} -} - -@misc{Bruel, - title = {Proposition d'indicateurs Des Externalities Environnementales Bas\'es Sur {{ACV}} et Les Services \'Ecosystemiques.Pdf}, - author = {Bruel, Aur{\'e}lien}, - file = {/Users/fabio/Zotero/storage/QNAJK85K/Proposition d'indicateurs des externalities environnementales basés sur ACV et les services écosystemiques.pdf} -} - -@inproceedings{Bruel2014, - title = {Economic {{Valuation}} of {{Changes}} in {{Ecosystem Services Provision}} within a {{Life Cycle Approach}}}, - booktitle = {Proceedings in the 4th International Conference {{A Community}} on {{Ecosystem Services}} ({{ACES}})}, - author = {Bruel, Aur{\'e}lien and Guillaume, Bertrand and Sirina, Natalia and Troussier, Nad{\`e}ge}, - year = {2014}, - address = {{Washington D.C}}, - doi = {10.13140/RG.2.1.4070.5362}, - urldate = {2020-05-24} -} - -@article{Bruel2016, - title = {Considering {{Ecosystem Services}} in {{Life Cycle Assessment}} to {{Evaluate Environmental Externalities}}}, - author = {Bruel, Aur{\'e}lien and Troussier, Nad{\`e}ge and Guillaume, Bertrand and Sirina, Natalia}, - year = {2016}, - journal = {Procedia CIRP}, - volume = {48}, - pages = {382--387}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2016.03.143}, - abstract = {Environmental externalities are a typical example of market failures. These market failures could be corrected if decision makers had the "right" information and were aware of the real costs of their activities. Currently, companies consider biodiversity and Ecosystem Services (ES) as environmental externalities. The idea proposed in this paper is to study the links between the life cycle of a product and ES. To achieve that, the paper presents an approach to account for ES in Life Cycle Assessment (LCA). This proposal is illustrated in an industrial case study by means of a bio economic model of ES.}, - keywords = {Biodiversity,Ecosystem services,Environmental externalities,Life cycle assessment,Product life cycle}, - file = {/Users/fabio/Zotero/storage/IEXICMHR/Considering Ecosystem Services in Life Cycle Assessment to Evaluate Environmental Externalities.pdf} -} - -@article{Bruel2018, - title = {Linking {{Industrial Ecology}} and {{Ecological Economics}}: {{A Theoretical}} and {{Empirical Foundation}} for the {{Circular Economy}}}, - author = {Bruel, Aur{\'e}lien and Kronenberg, Jakub and Troussier, Nad{\`e}ge and Guillaume, Bertrand}, - year = {2019}, - month = feb, - journal = {Journal of Industrial Ecology}, - volume = {23}, - number = {1}, - pages = {12--21}, - publisher = {{Blackwell Publishing}}, - issn = {1088-1980}, - doi = {10.1111/jiec.12745}, - urldate = {2020-05-20}, - abstract = {The circular economy (CE) is a new model for the production and consumption of goods, which has attracted wide political attention as a strategy toward sustainability. However, the theoretical foundation of CE remains poorly structured and insufficiently explored. Recent studies have shown that the CE model draws on different schools of thought and that its origins are mainly rooted in fields such as industrial ecology (IE) and ecological economics (EE). In this article, we investigate the links between CE, IE, and EE and provide an overview of the similarities and differences between these fields. At the same time, we analyze to what extent the linkages between IE and EE can create a coherent body of knowledge for CE, and be used to identify further research opportunities. This paper shows that, until now, research on CE seems to be mainly rooted in the field of IE and based on concepts and tools that already exist in other fields, rather than inventing new ones. The reconciliation of IE and EE could provide a mechanism to extend beyond such a narrow focus, and increase knowledge of the theoretical and practical framework of CE to benefit sustainability.}, - keywords = {closed-loop economic system,industrial ecology,research opportunity,sustainable development,theoretical foundation,transdisciplinary research}, - file = {/Users/fabio/Zotero/storage/MPZKTKBT/full-text.pdf} -} - -@article{Brundtland1987, - title = {Our {{Common Future}}: {{Report}} of the {{World Commission}} on {{Environment}} and {{Development}}}, - author = {Brundtland, Gro H.}, - year = {1987}, - journal = {Medicine, Conflict and Survival}, - volume = {4}, - number = {1}, - pages = {300}, - issn = {0748-8009}, - doi = {10.1080/07488008808408783}, - abstract = {In 1983, the U.N. General Assembly created the World Commission on Environment and Development, an independent committee of twenty-two members, headed by Gro Harlem Brundtland, the Prime Minister of Norway. Designed to examine global environment and development to the year 2000 and beyond, the commission seeks to reassess critical problems, to formulate realistic proposals for solving them, and to raise the level of understanding and commitment to the issues of environment and development. Rather than presenting a gloom and doom report about the destruction of natural resources, Our Common Future offers an agenda advocating the growth of economies based on policies that do not harm, and can even enhance, the environment. The commission recognizes that the time has come for a marriage of economy and ecology, in order to ensure the growth of human progress through development without bankrupting the resources of future generations.}, - isbn = {019282080X}, - pmid = {41}, - keywords = {common future,development,environment,sustainable development}, - file = {/Users/fabio/Zotero/storage/QVF5THB9/Brundtland - 1987 - Our Common Future Report of the World Commission on Environment and Development.pdf} -} - -@article{brunettaTerritorialResilienceProactive2019, - title = {Territorial {{Resilience}}: {{Toward}} a {{Proactive Meaning}} for {{Spatial Planning}}}, - shorttitle = {Territorial {{Resilience}}}, - author = {Brunetta, Grazia and Ceravolo, Rosario and Barbieri, Carlo Alberto and Borghini, Alberto and {de Carlo}, Francesca and Mela, Alfredo and Beltramo, Silvia and Longhi, Andrea and De Lucia, Giulia and Ferraris, Stefano and Pezzoli, Alessandro and Quagliolo, Carlotta and Salata, Stefano and Voghera, Angioletta}, - year = {2019}, - month = jan, - journal = {Sustainability}, - volume = {11}, - number = {8}, - pages = {2286}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2071-1050}, - doi = {10.3390/su11082286}, - urldate = {2022-10-16}, - abstract = {The international debate on resilience has grown around the ability of a community to prepare for and adapt to natural disasters, with a growing interest in holistically understanding complex systems. Although the concept of resilience has been investigated from different perspectives, the lack of understanding of its conceptual comprehensive aspects presents strong limitations for spatial planning and for the adoption of policies and programs for its measurement and achievement. In this paper, we refer to ``territorial resilience'' as an emerging concept capable of aiding the decision-making process of identifying vulnerabilities and improving the transformation of socio-ecological and technological systems (SETSs). Here, we explore the epistemology of resilience, reviewing the origins and the evolution of this term, providing evidence on how this conceptual umbrella is used by different disciplines to tackle problem-solving that arises from disaster management and command-control practices to augment the robustness. Assuming the SETSs paradigm, the seismic and structural engineering, social sciences and history, urban planning and climatology perspectives intersects providing different analytical levels of resilience, including vulnerability and patrimony from a community and cultural perspective. We conclude that territorial resilience surpasses the analytical barriers between different disciplines, providing a useful concept related to complex problem-solving phenomena for land use planning, opening a new research question: how can territorial resilience be measured, acknowledging different units and levels of analysis aiding decision-making in spatial plans and projects? In attempting to understand a resilient system, quantitative and qualitative measurements are crucial to supporting planning decisions.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {adaptation,co-evolution,interdisciplinary,resilience,spatial planning,transformation}, - file = {/Users/fabio/Zotero/storage/5Z4QAFQ2/Brunetta et al_2019_Territorial Resilience.pdf;/Users/fabio/Zotero/storage/J65EIVM8/2286.html} -} - -@article{brydgesClosingLoopTake2021, - title = {Closing the Loop on Take, Make, Waste: {{Investigating}} Circular Economy Practices in the {{Swedish}} Fashion Industry}, - author = {Brydges, Taylor}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {293}, - pages = {126245}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126245}, - urldate = {2021-02-14}, - file = {/Users/fabio/Zotero/storage/HW8JKU4L/full-text.pdf} -} - -@article{Brzoska2020, - title = {From {{City-}} to {{Site-Dimension}} : {{Assessing}} the {{Urban Ecosystem Services}} of {{Different Types}} Of}, - author = {Brzoska, P. and Spage, A.}, - year = {2020}, - journal = {MPDI Land}, - volume = {9}, - number = {150}, - pages = {1--18}, - keywords = {assessment,cities,ecosystem services,green infrastructure,site,systematic literature review,urban ecosystem services,urban planning}, - file = {/Users/fabio/Zotero/storage/XCRP79SC/land-09-00150-v2.pdf} -} - -@article{brzoskaMulticriteriaAnalyticalMethod2021, - ids = {Brzoska2021}, - title = {A Multi-Criteria Analytical Method to Assess Ecosystem Services at Urban Site Level, Exemplified by Two {{German}} City Districts}, - author = {Brzoska, P. and Grunewald, K. and Bastian, O.}, - year = {2021}, - month = jun, - journal = {Ecosystem Services}, - volume = {49}, - pages = {101268}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101268}, - urldate = {2021-06-08}, - file = {/Users/fabio/Zotero/storage/DGN7B4NF/full-text.pdf} -} - -@article{bubiczIncorporatingSocialAspects2019, - title = {Incorporating Social Aspects in Sustainable Supply Chains: {{Trends}} and Future Directions}, - author = {Bubicz, Marta Elisa and {Barbosa-P{\'o}voa}, Ana Paula Ferreira Dias and Carvalho, Ana}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117500}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.331}, - urldate = {2020-06-18}, - abstract = {The social dimension of sustainability in supply chains has grown in importance in both academic and industrial communities. This article aims to understand how social dimension has been incorporated in supply chain management research in the past years and what research gaps still exist. For this purpose, a systematic literature review is performed where 621 articles are analysed considering a set of categories that include: research methodology; social dimension; social analysis focus; supply chain entities; traceability and transparency; uncertainty and risk; industrial activity sector. A cross-analysis between categories is presented, revealing that social sustainability concerns have been increasingly addressed along the years, but further research still needs to be performed to achieve more inclusive social supply chains. N-Vivo Software is used to perform the content analysis. The main research gaps and trends regarding social concerns in supply chains are identified and systematised into a framework that can be used to integrate social aspects in supply chains. Based on the latter, a research agenda is defined targeting concerned researchers and practitioners to attain the sustainable supply chains.}, - keywords = {Social sustainability,Sustainable supply chains,Systematic literature review} -} - -@article{buch-hansenScienceDeepTransformations2021, - title = {Towards a Science of Deep Transformations: {{Initiating}} a Dialogue between Degrowth and Critical Realism}, - author = {{Buch-Hansen}, Hubert and Nesterova, Iana}, - year = {2021}, - month = dec, - journal = {Ecological Economics}, - volume = {190}, - pages = {107188}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107188}, - urldate = {2021-08-24} -} - -@inproceedings{Buchenau2000, - title = {Experience {{Prototyping}}}, - booktitle = {Conference on {{Designing}} Interactive Systems: Processes, Practices, Methods, and Techniques}, - author = {Buchenau, M and Francisco, I S and Suri, J F}, - year = {2000}, - pages = {424--433}, - issn = {3037782250}, - doi = {http://doi.acm.org/10.1145/347642.347802}, - abstract = {In this paper, we describe "Experience Prototyping" as a form of prototyping that enables design team members, users and clients to gain first-hand appreciation of existing or future conditions through active engagement with prototypes. We use examples from commercial design projects to illustrate the value of such prototypes in three critical design activities: understanding existing experiences, exploring design ideas and in communicating design concepts.}, - isbn = {1-58113-219-0}, - pmid = {190}, - keywords = {design,experience,methods,prototyping} -} - -@article{Buchi2020, - title = {Smart Factory Performance and {{Industry}} 4.0}, - author = {B{\"u}chi, Giacomo and Cugno, Monica and Castagnoli, Rebecca}, - year = {2020}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {150}, - pages = {119790}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119790} -} - -@article{buchmann-duckUrgentCallCircular2020, - title = {An Urgent Call for Circular Economy Advocates to Acknowledge Its Limitations in Conserving Biodiversity}, - author = {{Buchmann-Duck}, Johanna and Beazley, Karen F.}, - year = {2020}, - month = jul, - journal = {Science of The Total Environment}, - volume = {727}, - pages = {138602}, - publisher = {{Elsevier}}, - issn = {0048-9697}, - doi = {10.1016/J.SCITOTENV.2020.138602}, - urldate = {2021-07-20}, - abstract = {This discussion paper explores the relationship between biodiversity and the circular economy and the potential implications of this relationship. The circular economy has emerged as an alternative model to a traditional linear economy. It aims to tackle the resource exploitation that accompanies a linear economy and decouple economic growth from reliance on primary resources. In the face of global environmental degradation and an urgent need for change, the concept has become popular around the world and has led to the release of national policies and strategies on the circular economy. Problematically, while the basic concept is clear, it is ambiguous in how it will achieve some of its objectives, and it fails to address some key issues. In light of the accelerating rate of change, precipitous biodiversity decline is one such key issue. Through a content analysis of relevant circular economy publications, authors demonstrate that biodiversity protection is rarely mentioned in theory and policy. While the circular economy holds many benefits for society, its evasion of scrutiny has prevented it from manifesting in a comprehensive solution to environmental issues. The circular economy advocates for biomimicry, ecosystem service valuation, bioeconomy, and renewable energy. Each of these, however, has its own set of conflicts with biodiversity protection. Given the imminent need to protect biodiversity, the authors call for further research on the interaction between biodiversity and the circular economy, and for circular economy advocates to explicitly acknowledge the concept's limitations, thereby revealing the need for intersectional and complementary policies which aim to protect biodiversity.}, - keywords = {Biodiversity,Bioeconomy,Biomimicry,Circular economy,Ecosystem services,Natural capital,Renewable energy} -} - -@article{buchsSustainableWelfareHow2021, - title = {Sustainable Welfare: {{How}} Do Universal Basic Income and Universal Basic Services Compare?}, - author = {B{\"u}chs, Milena}, - year = {2021}, - month = nov, - journal = {Ecological Economics}, - volume = {189}, - pages = {107152}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107152}, - urldate = {2021-08-23}, - abstract = {The newly emerging concept of sustainable welfare refers to welfare systems which aim to satisfy everyone's needs within planetary boundaries and to decouple the welfare-growth nexus. Both Universal Basic Income (UBI) and Universal Basic Services (UBS) have been discussed as suitable, but potentially competing, approaches that could support sustainable welfare. This paper contributes to this debate by asking how UBI and UBS compare in relation to four sustainable welfare criteria: a) planetary boundaries, b) needs satisfaction, c) fair distribution, and d) democratic governance. The paper argues that UBI and UBS are not so much conflicting but complementary approaches for supporting sustainable welfare. UBI focuses on the consumption side of the economy while UBS addresses the production side more directly, both of which would be relevant in any sustainable welfare system. Sustainable welfare outcomes of UBI and UBS would be shaped by the institutional contexts within which they operate, especially by the governance of markets, collective provisioning systems and decision-making at all levels. More attention needs to be paid to these institutional contexts when discussing potential sustainable welfare outcomes of UBI and UBS.}, - keywords = {Democratic Governance,Equality,Markets,Needs satisfaction,Planetary boundaries,Post-growth,Provisioning systems,Sustainable welfare,Universal Basic Income,Universal Basic Services}, - file = {/Users/fabio/Zotero/storage/AUAUULJ4/full-text.pdf} -} - -@inproceedings{Bucknall2020, - title = {Plastics as a Materials System in a Circular Economy: {{Plastics}} in the {{Circular Economy}}}, - booktitle = {Philosophical {{Transactions}} of the {{Royal Society A}}: {{Mathematical}}, {{Physical}} and {{Engineering Sciences}}}, - author = {Bucknall, David G.}, - year = {2020}, - month = jul, - volume = {378}, - publisher = {{The Royal Society Publishing}}, - issn = {1364503X}, - doi = {10.1098/rsta.2019.0268}, - urldate = {2021-07-20}, - abstract = {Plastics have transformed our modern world. With a range of outstanding properties, they are used in an ever-widening range of applications. However, the linear economy of their use means that a large volume of plastics is discarded after use. It is believed that approximately 80\% of the estimated total 6.3 Bt of plastics ever produced have been discarded, representing not only a huge loss of valuable resources, but mismanaged waste is also the origin of an ever-increasing environmental disaster. Strategies to prevent loss of materials resources and damage to the environment are elements of a circular plastics economy that aims to maintain plastics at their highest value for the longest time possible and at the same time improve the economy and prevent detrimental environmental impact. The latter in particular is driving recent changes in policies and legislation across the world that are rapidly being introduced in order to solve these environmental issues. The achievement of a circular economy will require not only innovative technical developments, but also major economic investment and changes to business practice coupled with significant changes in social behaviour. This paper summarizes the complex and highly interrelated technical issues and provides an overview of the major challenges, potential solutions and opportunities required to achieve and operate a circular plastics economy. This article is part of a discussion meeting issue 'Science to enable the circular economy'.}, - pmid = {32623994}, - keywords = {bioplastics,circular economy,energy recovery,polymers,recycling,reuse} -} - -@article{bucknallPlasticsMaterialsSystem2020, - title = {Plastics as a Materials System in a Circular Economy}, - author = {Bucknall, David G.}, - year = {2020}, - month = jul, - journal = {Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences}, - volume = {378}, - number = {2176}, - pages = {20190268}, - publisher = {{Royal Society}}, - doi = {10.1098/rsta.2019.0268}, - urldate = {2023-08-31}, - abstract = {Plastics have transformed our modern world. With a range of outstanding properties, they are used in an ever-widening range of applications. However, the linear economy of their use means that a large volume of plastics is discarded after use. It is believed that approximately 80\% of the estimated total 6.3\,Bt of plastics ever produced have been discarded, representing not only a huge loss of valuable resources, but mismanaged waste is also the origin of an ever-increasing environmental disaster. Strategies to prevent loss of materials resources and damage to the environment are elements of a circular plastics economy that aims to maintain plastics at their highest value for the longest time possible and at the same time improve the economy and prevent detrimental environmental impact. The latter in particular is driving recent changes in policies and legislation across the world that are rapidly being introduced in order to solve these environmental issues. The achievement of a circular economy will require not only innovative technical developments, but also major economic investment and changes to business practice coupled with significant changes in social behaviour. This paper summarizes the complex and highly interrelated technical issues and provides an overview of the major challenges, potential solutions and opportunities required to achieve and operate a circular plastics economy. This article is part of a discussion meeting issue `Science to enable the circular economy'.}, - keywords = {bioplastics,circular economy,energy recovery,polymers,recycling,reuse}, - file = {/Users/fabio/Zotero/storage/7NTPD7N5/Bucknall_2020_Plastics as a materials system in a circular economy.pdf} -} - -@article{Buekens1977, - title = {Some Observations on the Recycling of Plastics and Rubber}, - author = {Buekens, A. G.}, - year = {1977}, - journal = {Conservation and Recycling}, - volume = {1}, - number = {3-4}, - pages = {247--271}, - issn = {03613658}, - doi = {10.1016/0361-3658(77)90014-5}, - abstract = {After a discussion of the quantity and quality of plastic wastes of various origin, the different possibilities for recycling these wastes are critically reviewed. Closed-loop recycling of pure, well-defined wastes is a problem only in critical applications. The recycling of mixed wastes, on the other hand, gives rise to a number of technical and economic difficulties. Direct processing is difficult, because of the different melting behaviour and thermal stability of the various components, and moreover leads to polymer "alloys" with poor mechanical properties and marketing potential. Sorting processes still yield fractions of insufficient purity. Compatibilising additives are expensive and not very efficient. The future of recycling depends on the development of new markets for plastics with inferior properties and of processing methods to improve the properties of mixed plastics. Pyrolysis and hydrolysis open a range of interesting developments, but their economic and technical feasibility remain to be proven. Incineration, biodegradation and tipping cannot be considered to be fully satisfactory disposal methods, and recycling should be encouraged wherever it is economically and technically feasible. ?? 1977.}, - file = {/Users/fabio/Zotero/storage/9HHB2TLH/Some observations on the recycling of plastics and rubber.pdf} -} - -@book{BuildingMultifunctionalityPlastic, - title = {Building in {{Multifunctionality}} in {{Plastic Components}}: {{Complexity}}, {{Cost}} and {{Sustainability}}}, - doi = {10.3233/978-1-61499-792-4-377} -} - -@article{buiOpportunitiesChallengesSolid2022, - title = {Opportunities and Challenges for Solid Waste Reuse and Recycling in Emerging Economies: {{A}} Hybrid Analysis}, - author = {Bui, Tat Dat and Tseng, Jiun Wei and Tseng, Ming Lang and Lim, Ming K.}, - year = {2022}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {177}, - pages = {105968}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105968}, - urldate = {2021-11-07}, - abstract = {This study enriches sustainable solid waste management knowledge by establishing a valid hierarchical model and critiques the causal interrelationship between waste reuse and recycling attributes. The challenges and opportunities for sustainable waste reuse and recycling are emphasized, and direction is provided for practices. Many developing and emerging countries have been attempting to address solid waste management problems and serious restrictions on material reuse and recycling activities. However, it is not well developed, and reuse and recycling efforts have not yet been well implemented due to weak economic and political institution levels. This study aims to propose a sustainable solid waste management model and address opportunities and challenges for waste reuse and recycling in a developing country. A hybrid approach is adopted using a systematic data-driven analysis comprising content analyses, system uncertainty and complexity, the fuzzy Delphi method, interpretive structural modeling, and the fuzzy decision-making trial and evaluation laboratory. The results show that 19 valid indicators are congregated into five aspects, in which circular resource management, societal requirements, and municipal sustainability are causative aspects with the capability to improve sustainable solid waste management as it regards waste reuse and recycling. The top prominent indicators helping to enhance practices are the circular economy, the informal sector, material flow analysis, policy restrictions, waste treatment technologies. The state-of-the-art literature is presented, and further opportunities and challenges are determined.}, - keywords = {Data-driven,Emerging country,Reuse and recycling,Sustainable solid waste management} -} - -@inproceedings{Buitenhuis2010, - title = {Open {{Design-Based Strategies}} to {{Enhance Appropriate Technology Development}}}, - booktitle = {Proceedings of the 14th {{Annual National Collegiate Inventors}} and {{Innovators Alliance Conference}} : {{Open}}}, - author = {Buitenhuis, A. J. and Zelenika, I. and Pearce, J.M.}, - year = {2010}, - pages = {1--12}, - file = {/Users/fabio/Zotero/storage/C9I37DCG/Buitenhuis, Zelenika, Pearce - 2010 - Open Design-Based Strategies to Enhance Appropriate Technology Development.pdf} -} - -@article{Bukharova2014, - title = {Production of Polyethylene Terephthalate Based Sorbent and Its Use for Waste and Surface Water Cleaning from Oil Products}, - author = {Bukharova, E. A. and Tatarintseva, E. A. and Ol'Shanskaya, L. N.}, - year = {2014}, - journal = {Chemical and Petroleum Engineering}, - volume = {50}, - number = {9-10}, - pages = {595--599}, - issn = {00092355}, - doi = {10.1007/s10556-014-9947-1}, - abstract = {Effective and inexpensive sorbing materials can be manufactured from secondary (recycled) polymers, which will help solve problems of water cleaning and waste recycling. A technology of sorbing material manufacture from polyethylene terephthalate wastes for waste and surface water cleaning is described, and the physicochemical properties of the sorbent and the efficiency of water cleaning from oil products are studied.}, - keywords = {Cleaning of water from oil products,PET waste,Sorbent}, - file = {/Users/fabio/Zotero/storage/RNB6G8F9/Production of Polyethylene Terephthalate Based Sorbent and its Use for Waste and Surface Water Cleaning from Oil Products.pdf} -} - -@article{burdonLinkingNaturalCapital2022, - title = {Linking Natural Capital, Benefits and Beneficiaries: {{The}} Role of Participatory Mapping and Logic Chains for Community Engagement}, - author = {Burdon, D. and Potts, T. and Barnard, S. and Boyes, S.J. and Lannin, A.}, - year = {2022}, - month = aug, - journal = {Environmental Science \& Policy}, - volume = {134}, - pages = {85--99}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.04.003}, - urldate = {2022-05-23} -} - -@article{Burgess2021, - title = {The Future of {{UK}} Plastics Recycling: {{One Bin}} to {{Rule Them All}}}, - author = {Burgess, Martin and Holmes, Helen and Sharmina, Maria and Shaver, Michael P.}, - year = {2021}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {164}, - pages = {105191}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105191}, - urldate = {2020-10-05}, - file = {/Users/fabio/Zotero/storage/M8JFC5BL/full-text.pdf} -} - -@article{Burkhard2009, - title = {Landscapes' Capacities to Provide Ecosystem Services - {{A}} Concept for Land-Cover Based Assessments}, - author = {Burkhard, Benjamin and Kroll, Franziska and M{\"u}ller, Felix and Windhorst, Wilhelm}, - year = {2009}, - journal = {Landscape Online}, - volume = {15}, - number = {1}, - pages = {1--22}, - issn = {18651542}, - doi = {10.3097/LO.200915}, - abstract = {Landscapes differ in their capacities to provide ecosystem goods and services, which are the benefits humans obtain from nature. Structures and functions of ecosystems needed to sustain the provision of ecosystem services are altered by various human activities. In this paper, a concept for the assessment of multiple ecosystem services is proposed as a basis for discussion and further development of a respective evaluation instrument. Using quantitative and qualitative assessment data in combination with land cover and land use information originated from remote sensing and GIS, impacts of human activities can be evaluated. The results reveal typical patterns of different ecosystems' capacities to provide ecosystem services. The proposed approach thus delivers useful integrative information for environmental management and landscape planning, aiming at a sustainable use of services provided by nature. The research concept and methodological framework presented here for discussion have initially been applied in different case studies and shall be developed further to provide a useful tool for the quantification and spatial modelling of multiple ecosystem services in different landscapes. An exemplary application of the approach dealing with food provision in the Halle-Leipzig region in Germany is presented. It shows typical patterns of ecosystem service distribution around urban areas. As the approach is new and still rather general, there is great potential for improvement, especially with regard to a data-based quantification of the numerous hypotheses, which were formulated as base for the assessment. Moreover, the integration of more detailed landscape information on different scales will be needed in future in order to take the heterogeneous distribution of landscape properties and values into account. Therefore, the purpose of this paper is to foster critical discussions on the methodological development presented here. \textcopyright{} 2009 IALE-D.}, - keywords = {Corine land cover,Ecosystem integrity,Ecosystem services,Indicators,Land use}, - file = {/Users/fabio/Zotero/storage/SVQQ9XNG/75-Article Text - Authorship-revealed Version (Word Document)-126-1-10-20190712.pdf} -} - -@article{Burkhard2012, - title = {Mapping Ecosystem Service Supply, Demand and Budgets}, - author = {Burkhard, Benjamin and Kroll, Franziska and Nedkov, Stoyan and M{\"u}ller, Felix}, - year = {2012}, - month = oct, - journal = {Ecological Indicators}, - volume = {21}, - pages = {17--29}, - publisher = {{Elsevier}}, - issn = {1470160X}, - doi = {10.1016/j.ecolind.2011.06.019}, - urldate = {2021-04-23}, - abstract = {Among the main effects of human activities on the environment are land use and resulting land cover changes. Such changes impact the capacity of ecosystems to provide goods and services to the human society. This supply of multiple goods and services by nature should match the demands of the society, if self-sustaining human-environmental systems and a sustainable utilization of natural capital are to be achieved. To describe respective states and dynamics, appropriate indicators and data for their quantifi-cation, including quantitative and qualitative assessments, are needed. By linking land cover information from, e.g. remote sensing, land survey and GIS with data from monitoring, statistics, modeling or interviews , ecosystem service supply and demand can be assessed and transferred to different spatial and temporal scales. The results reveal patterns of human activities over time and space as well as the capacities of different ecosystems to provide ecosystem services under changing land use. Also the locations of respective demands for these services can be determined. As maps are powerful tools, they hold high potentials for visualization of complex phenomena. We present an easy-to-apply concept based on a matrix linking spatially explicit biophysical landscape units to ecological integrity, ecosystem service supply and demand. An exemplary application for energy supply and demand in a central German case study region and respective maps for the years 1990 and 2007 are presented. Based on these data, the concept for an appropriate quantification and related spatial visualization of ecosystem service supply and demand is elaborated and discussed.}, - keywords = {CORINE land cover,Ecological integrity,Ecosystem functions,Ecosystem service footprint,Ecosystem service maps,GIS}, - file = {/Users/fabio/Zotero/storage/6RL9Y5AM/Burkhard et al. - 2012 - Mapping ecosystem service supply, demand and budgets.pdf} -} - -@book{Burkhard2017, - title = {Ecosystem {{Services Mapping}}}, - author = {Burkhard, Benjamin and Maes, Joachim}, - year = {2017}, - journal = {Advanced books}, - publisher = {{Pensoft Publishers}}, - isbn = {978-954-642-829-5}, - file = {/Users/fabio/Zotero/storage/5ERS8ZZH/Burkhard2017.pdf} -} - -@article{Burkhart2015, - title = {Framework to Predict the Environmental Impact of Additive Manufacturing in the Life Cycle of a Commercial Vehicle}, - author = {Burkhart, Mathias and Aurich, Jan C.}, - year = {2015}, - journal = {Procedia CIRP}, - volume = {29}, - pages = {408--413}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2015.02.194}, - abstract = {Adding layer after layer of material is the operating principle of Additive Manufacturing (AM) and has the potential to change fundamental conditions in all phases of the product life cycle. AM implications such as design freedom allow the optimization of product properties such as weight or efficiency to achieve a better life cycle performance. Considering AM implications for highly utilized products such as commercial vehicles may have big sustainable impacts if fuel consumption can be reduced. Thereby manufacturers are challenged to implement new manufacturing technologies that enable sustainable products and production. The objective of this article is to provide guidance for manufacturers to decrease the environmental impact of their product through manufacturing components with AM. Therefore a framework is presented to identify components with potential for improvement and to predict the required improvement to decrease the environmental impact with AM.}, - keywords = {Additive manufacturing,Commercial vehicle,Environmental impact,Life cycle assessment,Powder bed fusion}, - file = {/Users/fabio/Zotero/storage/LUM4NI5N/Burkhart, Aurich - 2015 - Framework to predict the environmental impact of additive manufacturing in the life cycle of a commercial vehi.pdf} -} - -@article{Burmaoglu2019a, - title = {Conceptual Definition of Technology Emergence: {{A}} Long Journey from Philosophy of Science to Science Policy}, - author = {Burmaoglu, Serhat and Sartenaer, Olivier and Porter, Alan}, - year = {2019}, - journal = {Technology in Society}, - volume = {59}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.04.002}, - urldate = {2020-05-21}, - abstract = {Technology and innovation policy has been the core of economic development since the 1950s. Moreover, the increasing rate of technological developments allowed policy and strategy makers to think about technology emergence for proactive planning. In this sense, technological emergence became popular with different applications and foresight studies. However, even though it is a popular concept in the literature, an accepted formal definition is lacking. In this study, we propose a definition based on review as; ``Technological emergence is a cyclic process in highly creative scientific networks that demonstrates qualitative novelty, qualitative synergy, trend irregularity, high functionality, and continuity aspects in a specified time frame''. We discuss and explain the definition by demonstrating it in a multi-dimensional model to make it understandable and applicable for future studies. Finally, we discuss it with existing literature and propose future implications.}, - keywords = {Concept,Emergence,Emerging technology,Review,Technological emergence}, - file = {/Users/fabio/Zotero/storage/DGHT7N3S/full-text.pdf} -} - -@article{Burret2017, - title = {Etude de La Configuration En {{Tiers-Lieu}} : La Repolitisation Par Le Service}, - author = {Burret, Antoine}, - year = {2017}, - month = jan, - publisher = {{Universit\'e de Lyon}}, - urldate = {2021-10-28}, - abstract = {Cette \'etude se propose de traiter le tiers-lieu en tant qu'objet. De le saisir dans toute sa complexit\'e pour essayer d'en d\'egager toute la simplicit\'e. Elle appr\'ehende le tiers-lieu comme un concept \`a d\'efinir. Pour y parvenir elle construit une enqu\^ete qui se d\'eplie en trois parties. Dans un premier temps, l'objet est approch\'e sous l'angle de la terminologie par une \'etude des usages courants, professionnels et litt\'eraires du terme, suivi de r\'eflexions sur les notions de lieu et de tiers. Des repr\'esentations historiques des tiers-lieux sont ensuite analys\'ees au travers des troisi\`emes lieux de Ray Oldenburg et de certaines structures sociales de la sph\`ere publique habermassienne notamment les salons et les caf\'es de la bourgeoisie au XVIIIe si\`ecle. Ce passage en revue permet de d\'elimiter l'objet, d'en clarifier les propri\'et\'es et les usages. Il constitue \'egalement le point de d\'epart et l'hypoth\`ese d'une enqu\^ete exploratoire qui a d\'etermin\'e la construction d'une posture d'investigation originale n\'ecessairement engag\'ee. Cette enqu\^ete s'est d\'eroul\'ee entre 2010 et 2015 aupr\`es de services \textendash{} espaces de coworking, fablabs, hackerspaces, makerspaces, biohackerspaces, etc. dans leur composition et recomposition successives - qui se d\'esignent ou se pr\'esentent explicitement comme des tiers-lieux. Les singularit\'es de ces tiers-lieux, la mani\`ere dont ils traduisent des valeurs qualitatives en valeurs juridiques et aussi en valeurs quantitatives, les rapports d'\'echange et les habitudes critiques des usagers contributeurs ainsi que les r\'egimes de conception sont ensuite th\'eoris\'es. \`A partir de l'ensemble de ces informations, une proposition de d\'efinition conceptuelle du tiers-lieu est formul\'ee. Celle-ci envisage le tiers-lieu comme une configuration sociale particuli\`ere o\`u se produit une rencontre entre des entit\'es individu\'ees qui s'engagent intentionnellement \`a la conception d'une repr\'esentation commune, c'est-\`a-dire \`a responsabilit\'e partag\'ee. Des invariants sont enfin pos\'es comme l'esquisse d'une logique op\'eratoire suppos\'ee d\'eterminer la pr\'esence de la configuration en tiers-lieu. Cette proc\'eduralisation pr\'esente une mani\`ere d'intervenir sur les r\`egles par la conception de services. C'est ce d\'epassement de la discursivit\'e qui distingue le tiers-lieu de l'espace public politique.}, - keywords = {Artificial,Artificiel,Commun,Conception,Critical analysis,Critique,Design,Digital,Entrepreneur,Espace public,Free,Libre,Mode de vie,Public sphere,R\`egle,Regulation,Service,Services,Tiers-lieu,Usage,Use,Valeur,Value,Way of life}, - file = {/Users/fabio/Zotero/storage/N53TGUVQ/burret_a_these_udl.pdf} -} - -@article{burrowsMessageBottleRethinking2022, - title = {The Message on the Bottle: {{Rethinking}} Plastic Labelling to Better Encourage Sustainable Use}, - author = {Burrows, Stephen D. and Ribeiro, Francisca and O'Brien, Stacey and Okoffo, Elvis and Toapanta, Tania and Charlton, Nathan and Kaserzon, Sarit and Lin, Chun-Yin and Tang, Cheng and Rauert, Cassandra and Wang, Xianyu and Shimko, Katja and O'Brien, Jake and Townsend, Piers A. and Grayson, Matthew N. and Galloway, Tamara and Thomas, Kevin V.}, - year = {2022}, - month = jun, - journal = {Environmental Science \& Policy}, - volume = {132}, - pages = {109--118}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.02.015}, - urldate = {2022-03-13} -} - -@article{Bustamante2015, - title = {Analysis of {{Characteristics}} and {{Types}} of {{Infrastructure}} of {{Innovation Laboratories}} : {{Implications}} for {{Strategic Management}}}, - author = {Bustamante, Ferney Osorio}, - year = {2015}, - pages = {105}, - abstract = {There is a strong emergence of new innovation laboratories all over the world. Past experiences have shown these types of projects are at risk to not succeed in their goals. The physical space is considered as a conscious asset to improve the innovation outcomes that must be carefully designed according with the strategic goals of the project. Throughout this work, five frameworks from the literature that analyze innovation laboratories are identified and compared. Then, based on both literature and authors' experience, an updated framework is proposed as basis for a guidance tool for researchers and practitioners aiming to adapt or to start a new laboratory. As part of the operationalization process of the framework, a preliminary maturity grid is built and from there a questionnaire is designed. Afterwards, an international study with answers from ten laboratories from five different countries is done. As result and main contribution from this work researchers and practitioners will find a comprehensive set of practices and experiences in the way innovation laboratories have been implemented and operated in order to build their own strategy.}, - keywords = {innovation environment,innovation laboratories,physical space,spaces,strategy} -} - -@article{Bustamante2016a, - title = {Spaces to Foster and Sustain Innovation: {{Towards}} a Conceptual Framework}, - author = {Bustamante, Ferney Osorio and Reyes, Jose Ismael Pena and Camargo, Mauricio and Dupont, Laurent}, - year = {2016}, - journal = {2015 IEEE International Conference on Engineering, Technology and Innovation/ International Technology Management Conference, ICE/ITMC 2015}, - doi = {10.1109/ICE.2015.7438661}, - abstract = {This paper studies the influence of the physical space in the performance of innovation laboratories. As there is a strong emergence of new innovation laboratories all over the world, past experiences have shown that this type of projects are at risk to not succeed in their goals. The physical space is considered as a conscious asset to improve the innovation outcomes that must be carefully designed according with the strategic goals of the project. In the present paper, at first five frameworks from the literature are identified and compared. Then, based on both literature and authors' experience an updated framework is proposed as basis for a future guidance tool for researchers and practitioners aiming to adapt or to start a new laboratory}, - isbn = {9781467371568}, - keywords = {innovation environment,innovation laboratories,physical space,spaces,strategy}, - file = {/Users/fabio/Zotero/storage/KPK7IDGU/Spaces to foster and sustain innovation Towards a conceptual framework.pdf} -} - -@article{bustamanteDigitalPlatformsCommon2023, - title = {Digital Platforms as Common Goods or Economic Goods? {{Constructing}} the Worth of a Nascent Agricultural Data Platform}, - shorttitle = {Digital Platforms as Common Goods or Economic Goods?}, - author = {Bustamante, Maria J.}, - year = {2023}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {192}, - pages = {122549}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122549}, - urldate = {2023-05-10}, - abstract = {The potential of digital platforms to deliver on both economic and societal values is contested, with many arguing that economic value is prioritized to the detriment of more social values. Yet, the literature lacks in-depth empirical studies on how these perceptions of worth in the early stage of platform development are developed and settled upon. This paper draws on valuation studies to provide insight into how multiple platform founders construct the worth of a nascent agriculture data-sharing platform in Sweden. Using qualitative methods, the study shows that initially, the platform founders consider a number of values (accessible and transparent data, profitability, sustainability and innovation) that are defined through `common good' and `economic good' aspects. However, the need to articulate the worth to potential funders and partners encourages a reliance on measurable qualities, which subsequently leads to a shift in how values are defined and discussed, foregrounding and backgrounding different values and stakeholders in the process. These insights point to the complexity for firms grappling with economic and social values and highlight the need for the re-evaluation of the frameworks used to determine the value of innovation in the agri-food sector.}, - langid = {english}, - keywords = {Agricultural platforms,Digital platforms,Platform worth,Valuation}, - file = {/Users/fabio/Zotero/storage/JBFF5JIU/Bustamante - 2023 - Digital platforms as common goods or economic good.pdf;/Users/fabio/Zotero/storage/5EUU98ZJ/S0040162523002342.html} -} - -@article{Butscher2012a, - title = {Printability of Calcium Phosphate Powders for Three-Dimensional Printing of Tissue Engineering Scaffolds}, - author = {Butscher, Andre and Bohner, Marc and Roth, Christian and Ernstberger, Annika and Heuberger, Roman and Doebelin, Nicola and Rudolf Von Rohr, Philipp and M??ller, Ralph}, - year = {2012}, - journal = {Acta Biomaterialia}, - volume = {8}, - number = {1}, - pages = {373--385}, - publisher = {{Acta Materialia Inc.}}, - issn = {17427061}, - doi = {10.1016/j.actbio.2011.08.027}, - abstract = {Three-dimensional printing (3DP) is a versatile method to produce scaffolds for tissue engineering. In 3DP the solid is created by the reaction of a liquid selectively sprayed onto a powder bed. Despite the importance of the powder properties, there has to date been a relatively poor understanding of the relation between the powder properties and the printing outcome. This article aims at improving this understanding by looking at the link between key powder parameters (particle size, flowability, roughness, wettability) and printing accuracy. These powder parameters are determined as key factors with a predictive value for the final 3DP outcome. Promising results can be expected for mean particle size in the range of 20-35 ??m, compaction rate in the range of 1.3-1.4, flowability in the range of 5-7 and powder bed surface roughness of 10-25 ??m. Finally, possible steps and strategies in pushing the physical limits concerning improved quality in 3DP are addressed and discussed. ?? 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.}, - isbn = {1742-7061}, - pmid = {21925623}, - keywords = {Calcium phosphates (CaP),Powder flowability,Powder wettability,Three-dimensional printing (3DP),Tissue engineering}, - file = {/Users/fabio/Zotero/storage/YFMGR283/Butscher et al. - 2012 - Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds.pdf} -} - -@article{buyleReboundEffectsFollowing2023, - title = {Rebound Effects Following Technological Advancement? {{The}} Case of a Global Shock in Ferrochrome Supply}, - shorttitle = {Rebound Effects Following Technological Advancement?}, - author = {Buyle, Matthias and Audenaert, Amaryllis and Brusselaers, Jan and Van Passel, Steven}, - year = {2023}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {391}, - pages = {136264}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136264}, - urldate = {2023-02-09}, - abstract = {Novel recycling technologies aim at increasing material efficiency by turning former waste products into valuable reclaimed resources. A key question is whether such technologies really reduce primary resource consumption or instead stimulate aggregated market demand. In this study the consequences of a positive shock in ferrochrome supply to the global stainless steel value chain is assessed quantitatively. This new source might be unlocked by technology under development for the recovery of chromium from carbon and stainless steel slags. The aim of this study is to quantitatively assess the income and substitution effects of reclaimed ferrochrome along a part of the stainless steel value chain. The impact of the supply shock is analysed by means of a vector autoregression (VAR), a dynamic model where lagged values of all included variables estimate current state of the system. Additionally, the VAR model is extended to a structural vector autoregression (SVAR) to account for contemporary effects as well. Both the VAR and SVAR model indicate that additional ferrochrome supply leads to an increase in aggregated supply of stainless steel, in combination with a substitution effect between ferrochrome and nickel. The extended SVAR model additionally highlights that contemporaneous effects do play an important role as well to capture the direct rebound effect in the ferrochrome market when working with quarterly data. In other words, an additional supply of reclaimed ferrochrome triggers a complex combination of interactions and consequences, yet it does not necessarily lead to a lower overall material consumption. The main contributions of this paper are the assessment of direct rebound effects of supplying reclaimed metals along the value chain and the demonstration that quantifying the effects of circular strategies is feasible.}, - langid = {english}, - keywords = {By-product valorisation,Chromium recovery,Emerging technology,Rebound effect,Vector autoregression}, - file = {/Users/fabio/Zotero/storage/3H6B6TFF/Buyle et al. - 2023 - Rebound effects following technological advancemen.pdf;/Users/fabio/Zotero/storage/HZETW9HL/S0959652623004225.html} -} - -@article{Byard2019, - title = {Green Fab Lab Applications of Large-Area Waste Polymer-Based Additive Manufacturing}, - author = {Byard, Dennis J. and Woern, Aubrey L. and Oakley, Robert B. and Fiedler, Matthew J. and Snabes, Samantha L. and Pearce, Joshua M.}, - year = {2019}, - month = may, - journal = {Additive Manufacturing}, - volume = {27}, - pages = {515--525}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.03.006}, - file = {/Users/fabio/Zotero/storage/8IAIRM6S/Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing.pdf} -} - -@article{Byun2004, - title = {A Decision Support System for the Selection of a Rapid Prototyping Process Using the Modified {{TOPSIS}} Method}, - author = {Byun, H.S. and Lee, K.H.}, - year = {2004}, - month = apr, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {26}, - number = {11-12}, - pages = {1338--1347}, - issn = {0268-3768}, - doi = {10.1007/s00170-004-2099-2}, - urldate = {2014-02-20}, - keywords = {decision making,decision support system,madm,modified topsis method,multiple-attribute,rapid prototyping process selection}, - file = {/Users/fabio/Zotero/storage/I8WIVGUP/A decision support system for the selection of a rapid prototyping process using the modified TOPSIS method.pdf} -} - -@article{c.StudyPrototypesDesign, - title = {A {{Study}} of {{Prototypes}}, {{Design Activity}}, and {{Design Outcome}}}, - author = {C., Yang M.}, - journal = {Des. Stud.}, - volume = {26}, - number = {6}, - pages = {649--669}, - urldate = {2021-02-16} -} - -@article{Cabanes2020, - title = {Odorant Composition of Post-Consumer {{LDPE}} Bags Originating from Different Collection Systems}, - author = {Cabanes, Andrea and Strangl, Miriam and Ortner, Eva and Fullana, Andres and Buettner, Andrea}, - year = {2020}, - month = mar, - journal = {Waste Management}, - volume = {104}, - pages = {228--238}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.01.021}, - urldate = {2020-04-08}, - abstract = {The establishment of recycling systems aiming at high-quality recyclates from post-consumer plastic waste are essential to avoid the waste of resources. One main impediment for introducing recyclates into the market is their unwanted odor. For this reason, this study aimed at determining if the collection strategy affects the odor profile of post-consumer LDPE bags. Furthermore, the effect of hot water washing, inspired by the conventional mechanical recycling procedure, on the odor of post-consumer LDPE bags was screened. More than 60 odorants were detected in LDPE bags collected in a separate plastic fraction as well as in LDPE bags from the non-separated collection by means of gas chromatography-olfactometry, and 37 of them were unequivocally identified using two-dimensional gas chromatography-mass spectrometry/olfactometry. The sensory results revealed that the type of collection affects the overall odor intensity, the hedonic tone of the odor and the odor profile. Namely, cheesy and fecal smelling odorants were predominant in the waste that had not been separated at source, whereas odorants with earthy and moldy smells showed mostly higher intensity ratings in the waste separated at source. Short chain carboxylic acids, likely originating from microbial spoilage of organic waste, were found with higher dilution factors in the mixed fraction, and could, accordingly, contribute to the observed differences. Additionally, we could show that the hot washing procedure, applied to the LDPE sample from the separate collection system, significantly reduced the overall odor intensity from 8 to 6.3 (0\textendash 10 scale). However, the washed waste still showed high smell intensity ratings.}, - keywords = {Gas chromatography,Odor,Olfactometry,Plastic,Sorting,Waste}, - file = {/Users/fabio/Zotero/storage/L4TMMYQ5/Odorant composition of post-consumer LDPE bags originating from different collection systems.pdf} -} - -@inproceedings{Cabral2009, - title = {Low-Cost {{GSM}} Telephony in the {{Amazon}} Region Based on Open-Source / Open-Hardware Projects}, - booktitle = {2009 {{IEEE}} Latin-American Conf. {{Commun}}.}, - author = {Cabral, Marcel and Almeida, Igor and Melo, Carlos and Klautau, Aldebaro}, - year = {2009}, - month = sep, - pages = {1--6}, - publisher = {{IEEE}}, - doi = {10.1109/LATINCOM.2009.5304848}, - isbn = {978-1-4244-4387-1} -} - -@article{Caccamo2020, - title = {Leveraging Innovation Spaces to Foster Collaborative Innovation}, - author = {Caccamo, Marta}, - year = {2020}, - journal = {Creativity and Innovation Management}, - number = {November 2019}, - pages = {1--14}, - issn = {14678691}, - doi = {10.1111/caim.12357}, - abstract = {Companies increasingly seek to foster collaborative innovation through the design of innovation spaces such as incubators, accelerators, studios, and fab labs. Innovation spaces bring together multiple actors for collaborative practices to generate new products and processes. Despite their growing popularity, many innovation spaces fail to deliver on their promises and are subsequently shut down. How can innovation spaces foster effective collaborative innovation? This article illustrates the role of space and boundary objects to facilitate collaborative innovation. Based on illustrative examples from the context of business studios, the findings show that innovation spaces enable the four affordances of convergence, generativity, socialization, and collaborative learning. Managers who design and run innovation spaces need to leverage these affordances to propel collaborative innovation.}, - file = {/Users/fabio/Zotero/storage/RA55SBT5/Leveraging innovation spaces to foster collaborative innovation.pdf} -} - -@article{caceres-mendozaLifeCycleAssessment2023, - title = {Life Cycle Assessment of Filament Production in Distributed Plastic Recycling via Additive Manufacturing}, - author = {{Caceres-Mendoza}, Cristian and {Santander-Tapia}, Pavlo and Cruz Sanchez, Fabio A. and Troussier, Nad{\`e}ge and Camargo, Mauricio and Boudaoud, Hakim}, - year = {2023}, - month = aug, - journal = {Cleaner Waste Systems}, - volume = {5}, - pages = {100100}, - issn = {2772-9125}, - doi = {10.1016/j.clwas.2023.100100}, - urldate = {2023-07-10}, - abstract = {Distributed recycling via additive manufacturing (DRAM) emphasizes an emerging approach to locally recycle waste plastic by 3D-printing it into valuable products. Although major progress has been reported in the last decade to validate the technical feasibility, and economic viability of the DRAM as an unitary operation, the environmental evaluation of this approach is still at its early stage as a distributed recycling network. The purpose of this study is to evaluate the environmental impact of a DRAM unit as a baseline scenario, compared to two scenarios of the virgin supply chain plastic filament used in the printing process. To achieve this goal, a comparative environmental performance using a life cycle assessment (LCA) is performed to estimate the multidimensional potential impacts of virgin and recycled polylactic acid (PLA). The study takes place using a physical recycling demonstrator developed at a university in Nancy, France. Four impact categories were considered: climate change, potential eutrophication (Freshwater and Marine), resource depletion (Fossil and Water), and ion radiation. For the first three impact categories, the results demonstrate a minimum 97\% reduction in environmental impact compared to a virgin supply chain. However, in terms of ion radiation, the amount of emissions is approximately 2.8 times higher than that of the virgin plastic scenario. This increase is mainly due to the specific situation in France, where most of the energy is generated using nuclear means. This study aims to expand on the environmental assessment of the plastic recycling network system to better understand the implementation of these systems for waste plastic management, which can help extend the lifetime of plastic material. The findings provide an environmental overview of the benefits and disadvantages of developing a DRAM system in a particular context.}, - copyright = {Licencia Creative Commons Atribuci\'on-NoComercial-CompartirIgual 4.0 Internacional (CC-BY-NC-SA)}, - langid = {english}, - keywords = {{Additive manufacturing, Circular economy},Distributed Recycling,LCA,Plastic}, - file = {/Users/fabio/Zotero/storage/F6AANQT4/Caceres-Mendoza et al. - 2023 - Life cycle assessment of filament production in di.pdf;/Users/fabio/Zotero/storage/PHKLA49Y/S277291252300026X.html} -} - -@article{cafieroCharacterizationWEEEPlastics2021, - title = {Characterization of {{WEEE}} Plastics and Their Potential Valorisation through the Production of {{3D}} Printing Filaments}, - author = {Cafiero, L. and De Angelis, D. and Di Dio, M. and Di Lorenzo, P. and Pietrantonio, M. and Pucciarmati, S. and Terzi, R. and Tuccinardi, L. and Tuffi, R. and Ubertini, A.}, - year = {2021}, - month = aug, - journal = {Journal of Environmental Chemical Engineering}, - volume = {9}, - number = {4}, - pages = {105532}, - issn = {2213-3437}, - doi = {10.1016/j.jece.2021.105532}, - urldate = {2023-07-24}, - abstract = {Plastic is probably the fraction of the waste of electrical and electronic equipment (WEEE) most challenging to manage and the market of recycled plastics from WEEE is limited to few cases. In this study, twenty WEEE plastic samples collected in two material recovery facilities (MRFs) from manually sorted housings and components and among some discarded devices stored in Casaccia Research Center were analysed through infrared identification and chemical-physical characterization. The analyses were carried out in order to select the suitable samples for mechanical recycling in 3D printer filaments. Eleven different polymers or blends were found in the WEEE samples and the majority of those collected in the MRFs resulted as mixtures of different plastics, although often of styrene-based nature. On the other hand, many WEEE samples showed a good similarity to the corresponding virgin polymers with a content of halogens and inorganic fillers less than 0.2 and 5~wt\%, respectively. The thirteen selected WEEE plastic samples were washed, reduced to {$<~$}4~mm and extruded in filaments with the proper diameter. The polymeric heterogeneity and the presence of foreign materials in some samples were the main critical issues highlighted during the extrusion. The suitable filaments were used to print test objects with different geometries. The quality control of the scanned objects, through a structured-light 3D scanner, showed that specimens printed with WEEE plastic filaments had no significant higher deviation from the model design in comparison to the same object produced using the commercial filaments.}, - langid = {english}, - keywords = {3D printing,Filament,Mechanical recycling,Plastic,WEEE}, - file = {/Users/fabio/Zotero/storage/CQFJ7JMF/S2213343721005091.html} -} - -@article{Cagno2019, - title = {Industrial Sustainability Performance Measurement Systems: {{A}} Novel Framework}, - author = {Cagno, Enrico and Neri, Alessandra and Howard, Mickey and Brenna, Gianluca and Trianni, Andrea}, - year = {2019}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {230}, - pages = {1354--1375}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.021} -} - -@article{caiGlobalPatternPollution2020, - title = {Global Pattern of Pollution Manufacturing Index ({{PMI}})}, - author = {Cai, Qixiang and Yan, Xiaodong}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125497}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125497}, - urldate = {2020-12-14} -} - -@article{Cainelli2020, - title = {Resource Efficient Eco-Innovations for a Circular Economy: {{Evidence}} from {{EU}} Firms}, - author = {Cainelli, Giulio and D'Amato, Alessio and Mazzanti, Massimiliano}, - year = {2020}, - month = feb, - journal = {Research Policy}, - volume = {49}, - number = {1}, - pages = {103827}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103827} -} - -@article{caldwellPuttingPeopleBack2021, - title = {Putting the People Back into the ``Smart'': {{Developing}} a Middle-out Framework for Engaging Citizens}, - author = {Caldwell, Glenda Amayo and Fredericks, Joel and Hespanhol, Luke and {Chamorro-Koc}, Marianella and Barajas, Mar{\'i}a Jos{\'e} S{\'a}nchez Varela and Andr{\'e}, Mar{\'i}a Jos{\'e} Castelazo}, - year = {2021}, - journal = {Shaping Smart for Better Cities}, - pages = {239--266}, - publisher = {{Elsevier}}, - doi = {10.1016/B978-0-12-818636-7.00008-1}, - urldate = {2022-03-13}, - abstract = {In this chapter, we discuss the Middle-Out Engagement Framework, which focuses on two cases undertaken in countries with emerging economies and their potential to inform broader practices of collaborative city-making. The cases discuss top-down and bottom-up collaborations that work toward acknowledging the importance of putting people back into the ``smart.'' In each case, we explore how creativity and technology can play a critical role in assisting the development and communication of ideas and knowledge sharing. Our focus on emerging countries highlights the influence that place and culture have on city-making initiatives, enabling us to propose a robust framework for the design, development, and deployment of middle-out engagement approaches across various urban contexts and scales.} -} - -@article{Calfee2016, - title = {Evaluation of Standardized Sample Collection, Packaging, and Decontamination Procedures to Assess Cross-Contamination Potential during {{Bacillus}} Anthracis Incident Response Operations}, - author = {Calfee, M. Worth and Tufts, Jenia and Meyer, Kathryn and McConkey, Katrina and Mickelsen, Leroy and Rose, Laura and Dowell, Chad and Delaney, Lisa and Weber, Angela and Morse, Stephen and Chaitram, Jasmine and Gray, Marshall}, - year = {2016}, - month = dec, - journal = {Journal of Occupational and Environmental Hygiene}, - volume = {13}, - number = {12}, - pages = {980--992}, - publisher = {{Taylor and Francis Inc.}}, - issn = {15459632}, - doi = {10.1080/15459624.2016.1200725}, - urldate = {2020-04-08}, - abstract = {Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures. Both decontamination procedures were quantitatively evaluated on three types of sample packaging materials (corrugated fiberboard, polystyrene foam, and polyethylene plastic), and two contamination mechanisms (wet or dry inoculums). Contaminant transfer results suggested that size-appropriate gloves should be worn by personnel, templates should not be taped to or removed from surfaces, and primary receptacles should be selected carefully. The decontamination tests indicated that wipe-based decontamination procedures may be more effective than spray-based procedures; efficacy was not influenced by material type but was affected by the inoculation method. Incomplete surface decontamination was observed in all tests with dry inoculums. This study provides a foundation for optimizing current B. anthracis response procedures to minimize contaminant exfiltration.}, - keywords = {Bacillus anthracis,cross-contamination,decontamination,sampling}, - file = {/Users/fabio/Zotero/storage/JNH4HMK8/Evaluation of standardized sample collection, packaging, and decontamination procedures to assess cross-contamination potential during Bacillus anthracis incident response operations.pdf} -} - -@article{CalistoFriant2020, - title = {A Typology of Circular Economy Discourses: {{Navigating}} the Diverse Visions of a Contested Paradigm}, - author = {Calisto Friant, Martin and Vermeulen, Walter J.V. and Salomone, Roberta}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104917}, - publisher = {{Elsevier B.V.}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104917}, - urldate = {2020-07-14}, - abstract = {The circular economy (CE) has recently become a popular discourse especially in government and corporate sectors. Given the socio-ecological challenges of the Anthropocene, the concept of CE could indeed help the transition to a sustainable, just and resilient future. However, the actual definition, objectives and forms of implementation of the CE are still unclear, inconsistent, and contested. Different actors and sectors are thus articulating circular discourses which align with their interests, and which often do not sufficiently examine the ecological, social and political implications of circularity. In this context, this research asks how to better navigate and analyse the history, complexity and plurality of circularity discourses by conceptually differentiating them in a comprehensive discourse typology. To answer this question a critical literature review has been carried out, which first, examines and reflects on the core challenges, gaps and limitations of the CE concept. Second, this research develops a comprehensive timeline of circularity thinking, which identifies and conceptually classifies 72 different CE-related concepts from the Global North and South (such as Gandhian and steady-state economics, buen vivir, doughnut economics and degrowth). This leads to the development of a typology of circularity discourses, which classifies circularity visions according to their position on fundamental social, technological, political and ecological issues. This research thus seeks to provide a basis for a more inclusive and comprehensive discussion on the topic, which opens the imaginary regarding the many circular futures that can exist and allows for a cross-pollination of ideas, policy options, strategies, practices and solutions.}, - keywords = {Circular economy,Circular society,Critical literature review,Discourse analysis,Sustainability}, - file = {/Users/fabio/Zotero/storage/WH8DRTKU/full-text.pdf} -} - -@article{calistoJournalPreproofAnalysing2020, - title = {Journal {{Pre-proof Analysing European Union}} Circular Economy Policies: Words versus Actions}, - author = {Calisto, Martin and Vermeulen, Walter J V and Salomone, Roberta}, - year = {2020}, - doi = {10.1016/j.spc.2020.11.001}, - urldate = {2020-11-11}, - abstract = {This is a PDF file of an article that has undergone enhancements after acceptance, such as the addition of a cover page and metadata, and formatting for readability, but it is not yet the definitive version of record. This version will undergo additional copyediting, typesetting and review before it is published in its final form, but we are providing this version to give early visibility of the article. Please note that, during the production process, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.}, - file = {/Users/fabio/Zotero/storage/ZY389FEI/full-text.pdf} -} - -@article{Calli2020, - title = {{{3D}} Printing Technology: Exploring the Adoption Process from the Viewpoint of Owners and Non-Owners}, - author = {Calli, Levent and {Busra Alma Calli}}, - year = {2020}, - month = may, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--13}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2020.1767771}, - urldate = {2020-05-26}, - abstract = {Recently, 3D printers have become increasingly prevalent. In addition to being an alternative to conventional manufacturing techniques for professionals and supporting the manufacturing environment...}, - keywords = {3D printing technology,marketing,new product development,technology \& innovation studies} -} - -@article{caloffiInnovationIntermediariesTypes2023, - title = {Innovation Intermediaries' Types and Functions: {{A}} Computational Analysis of the Literature}, - shorttitle = {Innovation Intermediaries' Types and Functions}, - author = {Caloffi, Annalisa and Colovic, Ana and Rizzoli, Valentina and Rossi, Federica}, - year = {2023}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {189}, - pages = {122351}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122351}, - urldate = {2023-02-09}, - abstract = {Innovation intermediaries have become numerous and diverse. Faced with this growing heterogeneity, there is the need to advance understanding of the organisations that engage in innovation intermediation activities. To do so, we use a combination of text mining and bibliometric techniques, and we identify seven different streams of literature, six of which refer to distinct types of intermediaries that perform specific functions and often involve specific types of organisations. Looking at the evolution of the different streams of literature over time, we find that the early contributions focused on university incubators, science and technology parks, and the role they play within different types of innovation systems. More recently, the focus has shifted to the role of intermediaries in supporting sustainable transitions. Despite the differences between the various types of intermediaries and the literature streams that analyse them, the bibliographic coupling shows that all strands of literature have a common theoretical basis, which includes the open innovation approach and revolves around the role of science parks and incubators.}, - langid = {english}, - keywords = {Cluster intermediaries,Computational literature review,Incubators,Innovation intermediaries,Innovation system intermediaries,KIBS,Open innovation intermediaries,Transition intermediaries}, - file = {/Users/fabio/Zotero/storage/IKDME67B/Caloffi et al. - 2023 - Innovation intermediaries' types and functions A .pdf} -} - -@article{Camacho2000, - title = {Quality-Determination of Recycled Plastic Packaging Waste by Identification of Contaminants by {{GC-MS}} after Microwave Assisted Extraction ({{MAE}})}, - author = {Camacho, Walker and Karlsson, Sigbritt}, - year = {2000}, - journal = {Polymer Degradation and Stability}, - volume = {71}, - number = {1}, - pages = {123--134}, - issn = {01413910}, - doi = {10.1016/S0141-3910(00)00163-4}, - abstract = {The quality of recycled resins of high density polyethylene (HDPE) and polypropylene (PP) separated from mixed solid waste (MSW) were studied by analyzing the tentative low molecular weight contaminants. For that purpose a microwave assisted extraction (MAE) technique was developed using MDPE and two aromatic antioxidants (Irganox 1010 and Irgafos 168) as models. A 50:50 mixture of cyclohexane and isopropanol gave high recovery yields; 97\% for Irgafos 168 and 93\% for Irganox 1010 and short extraction times. Limonene, isopropylester of myristic and palmitic acids were examples of products identified in recycled HDPE. These compounds are typically fragrance and flavor constituents. In addition alcohols, esters, ketones were identified. Most of the substances are constituents of the packaging fillings at their first usage. But the possibility that contaminants may have entered the material by contact with other plastics is not excluded. The major category of compounds identified already in the virgin material is composed of aliphatic hydrocarbons (e.g. pentadecane, hexadecaned, 1-hexadenene), branched alkanes, branched alkenes and others. The same kind of compounds were also identified in the recycled materials at a similar concentration as in virgin ones. Virgin and recycled polyethylene contain also ethylbenzene and o-, m- and p-xylenes, where o-xylene had the largest peak of the four. The aromatic hydrocarbons are probably parts of additives, which degraded during extraction and sample preparation procedures. Aromatic hydrocarbons without functional groups, such as ethylbenzene and xylenes are considered highly toxic, but the height and area of their peaks suggest low concentrations. The concentration of these hazardous contaminants in the recycled resin is, however, approximately five times higher in recycled material, estimated by a comparison of the peak areas. Ethylbenzene and o-, m- and p-xylenes, o-xylene having the largest peak of the four were also identified in virgin and recycled polypropylene resins.}, - keywords = {food packaging,gc,hdpe,microwave assisted extraction,migration,ms,pp,recycled plastics}, - file = {/Users/fabio/Zotero/storage/NK5EG4FV/Quality-determination of recycled plastic packaging waste by identication of contaminants by GC after microwave assisted extraction.pdf} -} - -@article{camanaAssessingEnvironmentalSustainability2021, - title = {Assessing Environmental Sustainability of Local Waste Management Policies in {{Italy}} from a Circular Economy Perspective: An Overview of Existing Tools}, - author = {Camana, Daniela and Manzardo, Alessandro and Toniolo, Sara and Gallo, Federico and Scipioni, Antonio}, - year = {2021}, - month = jan, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {613--629}, - publisher = {{Elsevier BV}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.01.029}, - urldate = {2021-02-14} -} - -@article{Camburn2015, - title = {A {{Systematic Method}} for {{Design Prototyping}}}, - author = {Camburn, Bradley and Dunlap, Brock and Gurjar, Tanmay and Hamon, Christopher and Green, Matthew and Jensen, Daniel and Crawford, Richard and Otto, Kevin and Wood, Kristin}, - year = {2015}, - month = aug, - journal = {Journal of Mechanical Design, Transactions of the ASME}, - volume = {137}, - number = {8}, - publisher = {{American Society of Mechanical Engineers (ASME)}}, - issn = {10500472}, - doi = {10.1115/1.4030331}, - urldate = {2021-02-16}, - abstract = {Scientific evaluation of prototyping practices is an emerging field in design research. Prototyping is critical to the success of product development efforts, and yet its implementation in practice is often guided by ad hoc experience. To address this need, we seek to advance the study and development of prototyping principles, techniques, and tools. A method to repeatedly enhance the outcome of prototyping efforts is reported in this paper. The research methodology to develop this method is as follows: (1) systematically identify practices that improve prototyping; (2) synthesize these practices to form a guiding method for designers; and (3) validate that the proposed method encourages best practices and improves performance. Prototyping practices are represented as six key heuristics to guide a designer in planning: how many iterations to pursue, how many unique design concepts to explore in parallel, as well as the use of scaled prototypes, isolated subsystem prototypes, relaxed requirements, and virtual prototypes. The method is correlated, through experimental investigation, with increased application of these best practices and improved design performance outcomes. These observations hold across various design problems studied. This method is novel in providing a systematic approach to prototyping.} -} - -@article{Camburn2017, - ids = {camburn2017,camburn2017a}, - title = {Design Prototyping Methods: {{State}} of the Art in Strategies, Techniques, and Guidelines}, - author = {Camburn, Bradley and Viswanathan, Vimal and Linsey, Julie and Anderson, David and Jensen, Daniel and Crawford, Richard and Otto, Kevin and Wood, Kristin}, - year = {2017}, - journal = {Design Science}, - volume = {3}, - publisher = {{Cambridge University Press}}, - issn = {20534701}, - doi = {10.1017/dsj.2017.10}, - urldate = {2021-01-26}, - abstract = {Prototyping is interwoven with nearly all product, service, and systems development efforts. A prototype is a pre-production representation of some aspect of a concept or final design. Prototyping often predetermines a large portion of resource deployment in development and influences design project success. This review surveys literature sources in engineering, management, design science, and architecture. The study is focused around design prototyping for early stage design. Insights are synthesized from critical review of the literature: key objectives of prototyping, critical review of major techniques, relationships between techniques, and a strategy matrix to connect objectives to techniques. The review is supported with exemplar prototypes provided from industrial design efforts. Techniques are roughly categorized into those that improve the outcomes of prototyping directly, and those that enable prototyping through lowering of cost and time. Compact descriptions of each technique provide a foundation to compare the potential benefits and drawbacks of each. The review concludes with a summary of key observations, highlighted opportunities in the research, and a vision of the future of prototyping. This review aims to provide a resource for designers as well as set a trajectory for continuing innovation in the scientific research of design prototyping.}, - keywords = {Design prototyping,Methods,Product,Service,Systems}, - file = {/Users/fabio/Zotero/storage/PT59HP2U/full-text.pdf;/Users/fabio/Zotero/storage/YGFCWDBY/Camburn et al. - 2017 - Design prototyping methods state of the art in st.pdf} -} - -@article{Caminero2018, - title = {Interlaminar Bonding Performance of {{3D}} Printed Continuous Fibre Reinforced Thermoplastic Composites Using Fused Deposition Modelling}, - author = {Caminero, M. A. and Chac{\'o}n, J. M. and {Garc{\'i}a-Moreno}, I. and Reverte, J. M.}, - year = {2018}, - journal = {Polymer Testing}, - volume = {68}, - number = {March}, - pages = {415--423}, - publisher = {{Elsevier}}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2018.04.038}, - abstract = {Continuous fibre reinforced thermoplastic composites (CFRTPCs) are becoming more significant in industrial applications due to their inherit advantages such as excellent mechanical performance, potential use in lightweight structures and being recyclable. Fused deposition modelling (FDM) is a promising additive manufacturing technology and an alternative to conventional processes for the fabrication of CFRTPCs due to its ability to build functional parts having complex geometries. However, a major concern affecting the efficient use of 3D printed composites is their weak interlaminar bonding performance compared to conventional pre-preg composites. The aim of this study is to evaluate the effect of layer thickness and fibre volume content on the interlaminar bonding performance of 3D printed continuous carbon, glass and Kevlar\textregistered fibre reinforced nylon composites manufactured by FDM technique. Short beam shear tests were carried out to determine interlaminar shear strength (ILSS). SEM images and cross-sectional micrographs were examined to assess failure mechanics of the different configurations. It was observed that the effect of layer thickness of nylon samples on the interlaminar shear performance was marginally significance. ILSS values decrease as layer thickness increase due to higher porosity. In addition, continuous fibre reinforced samples show higher ILSS values than unreinforced ones but, conversely, the level of increase in ILSS is moderate with continued increase in fibre content, particularly in the case of Kevlar\textregistered fibre. Carbon fibre reinforced composites exhibit the best interlaminar shear performance with higher stiffness. On the other hand, Kevlar\textregistered fibre reinforced composites have the lowest interlaminar shear performance due to poor wettability of Kevlar\textregistered fibre bundles by the nylon, leading to extensive delamination. Finally, the results obtained demonstrate that it is still a challenge to increase shear performance of 3D printed composites with respect to common pre-preg materials. Nevertheless, ILSS values exhibited by 3D printed composites are significantly higher than the usual 3D printed thermoplastics.}, - keywords = {Continuous fibre reinforced thermoplastic composit,Failure analysis,Fused deposition modelling,Interlaminar shear strength}, - file = {/Users/fabio/Zotero/storage/QXHCXKJF/Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling.pdf} -} - -@article{Caminero2018a, - title = {Impact Damage Resistance of {{3D}} Printed Continuous Fibre Reinforced Thermoplastic Composites Using Fused Deposition Modelling}, - author = {Caminero, M. A. and Chac{\'o}n, J. M. and {Garc{\'i}a-Moreno}, I. and Rodr{\'i}guez, G. P.}, - year = {2018}, - journal = {Composites Part B: Engineering}, - volume = {148}, - number = {March}, - pages = {93--103}, - publisher = {{Elsevier}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2018.04.054}, - abstract = {Fused deposition modelling (FDM) is a promising additive manufacturing technology and an alternative of conventional processes for the fabrication of fibre reinforced composites due to its ability to build functional parts having complex geometries. Continuous fibre reinforced thermoplastic composites (CFRTPCs) are becoming more significant in industrial applications due to their inherit advantages such as excellent mechanical performance, recycling and potential lightweight structures [1,2]. However, a major concern affecting the efficient use of 3D printed composites is the effect of impact damage on the structural integrity, compared to conventional pre-preg composites. The aim of this study is to evaluate the effect of build orientation, layer thickness and fibre volume content on the impact performance of 3D printed continuous carbon, glass, and Kevlar\textregistered fibre reinforced nylon composites, manufactured by FDM technique. Charpy impact tests are carried out to determine impact strength. SEM images of fractured surfaces are examined to assess failure mechanics of the different configurations. It is observed that the effect of layer thickness of nylon samples on the impact performance was different for flat and on-edge samples. Impact strength increases as layer thickness increases in flat samples but, conversely, it decreases in on-edge samples, depicting a more brittle fracture. In addition, the results show that impact strength increases as fibre volume content increases in most cases. Glass fibre reinforced samples exhibits the highest impact strength and carbon fibre reinforced samples the lowest one and similar to nylon performance. Furthermore, on-edge reinforced samples exhibit higher values of impact strength than flat reinforced samples. Finally, the results obtained demonstrate that impact strength exhibited by 3D printed composites are significantly higher than the usual 3D printed thermoplastics and, in some cases, even better than common pre-preg materials.}, - keywords = {3D printing,Continuous fibre reinforced thermoplastic composit,Failure analysis,Fused deposition modelling,Impact strength}, - file = {/Users/fabio/Zotero/storage/CZ8RSJWY/Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling.pdf} -} - -@article{Campagne2018, - title = {May the Matrix Be with You! {{Guidelines}} for the Application of Expert-Based Matrix Approach for Ecosystem Services Assessment and Mapping}, - author = {Campagne, Sylvie C. and Roche, Philip K.}, - year = {2018}, - journal = {One Ecosystem}, - volume = {3}, - pages = {e24134}, - publisher = {{Pensoft Publishers}}, - issn = {23678194}, - doi = {10.3897/oneeco.3.e24134}, - urldate = {2021-04-23}, - abstract = {Matrices or look-up tables are increasingly popular flexible tools for ecosystem services mapping and assessment. The matrix approach links ecosystem types or land cover types to ecosystem services by providing a score for ecosystem service (ES) capacity, supply, use, demand or other concepts. Using expert elicitation enables quick and integrative ES scoring that can meet general demand for validated ES mapping and assessment at different scales. Nevertheless, guidance is needed on how to collect and integrate expert knowledge to address some of the biases and limits of the expert elicitation method. This paper aims to propose a set of guidelines to produce ES matrices based on expert knowledge. It builds on existing literature and experience acquired through the production of several ES matrices in several ES assessments carried out in France. We propose a 7- steps methodology for the expert-based matrix approach that aims to promote cogency in the method and coherency in the matrices produced. The aim here is to use collective knowledge to produce semi-quantitative estimates of ES quantities and not to analyse individual or societal preferences or importance of ES. The definition of the objectives and the preparation phase is particularly important in order to define the components of capacity to demand ES chain to be addressed. The objectives and the ES components addressed will influence the composition of the expert panel. We recommend an individual filling of an empty matrix in order to strengthen the statistical analysis of the scores' variability and the analysis of congruency between experts. Expert scoring should follow a process of discussion, information-sharing and collective appropriation of a list of ecosystem types and ES to be assessed. We suggest that the ES matrix should not only focus on ES central scores but also address the variabilities and uncertainties as part of the ES assessment. The analysis of these sources of variability allows the documentation of variations in the ES quantity but also an exploration into the lack of consensus or knowledge gaps that needs to be addressed.}, - keywords = {Ecosystem services mapping tool,Expert elicitation,Look-up table,Matrix approach,Methodology,Scoring}, - file = {/Users/fabio/Zotero/storage/5U9UMYBV/full-text.pdf} -} - -@article{Campagne2020, - title = {Ten Years of Ecosystem Services Matrix: {{Review}} of a (r)Evolution}, - author = {Campagne, C Sylvie and Roche, Philip and M{\"u}ller, Felix and Burkhard, Benjamin}, - year = {2020}, - journal = {One Ecosystem}, - volume = {5}, - issn = {23678194}, - doi = {10.3897/oneeco.5.e51103}, - urldate = {2021-10-25}, - abstract = {With the Ecosystem Service (ES) concept's popularisation, the need for robust and practical methodologies for ES assessments has increased. The ES matrix approach, linking ecosystem types or other geospatial units with ES in easy-to-apply lookup tables, was first developed ten years ago and, since then, has been broadly used. Whereas detailed methodological guidelines can be found in literature, the ES matrix approach seems to be often used in a quick (and maybe even "quick and dirty'') way. Based on a review of scientific publications, in which the ES matrix approach was used, we present the diversity of application contexts, highlight trends of uses and propose future recommendations for improved applications of the ES matrix. A total of 109 studies applying the ES matrix approach and one methodological study without concrete applications were considered for the review. Amongst the main patterns observed, the ES matrix approach allows the assessment of a higher number of ES than other ES assessment methods. ES can be jointly assessed with indicators for ecosystem condition and biodiversity in the ES matrix. Although the ES matrix allows us consider many data sources to achieve the assessment scores for the individual ES, in the reviewed studies, these were mainly used together with expert-based scoring (73\%) and/or ES scores that were based on an already-published ES matrix or deduced by information found in related scientific publications (51\%). We must acknowledge that 27\% of the studies did not clearly explain their methodology. This points out a lack of method elucidation on how the data had been used and where the scores came from. Although some studies addressed the need to consider variabilities and uncertainties in ES assessments, only a minority of studies (15\%) did so. Our review shows that, in 29\% of the studies, an already-existing matrix was used as an initial matrix for the assessment (mainly the same matrix from one of the Burkhard et al. papers). In 16\% of the reviewed studies, no other data were used for the matrix scores or no adaptation of the existing matrix used was made. However, the actual idea of the ES scores, included in the Burkhard et al.'s matrices published 10 years ago, was to provide some examples and give inspiration for one's own studies. Therefore, we recommend to use only scores assessed for a specific study or, if one wishes to use pre-existing scores from another study, to revise them in depth, taking into account the local context of the new assessment. We also recommend to systematically report and consider variabilities and uncertainties in each ES assessment. We emphasise the need for all scientific studies to describe clearly and extensively the whole methodology used to score or evaluate ES in order to be able to rate the quality of the scores obtained. In conclusion, the application of the ES matrix has to become more transparent and integrate more variability analyses. The increasing number of studies that use the ES matrix approach confirms its success, appropriability, flexibility and utility for decision-making, as well as its ability to increase awareness of ES.}, - keywords = {Capacity matrix,Ecosystem services assessment,Expert-based,Look-up table,Tiered approach}, - file = {/Users/fabio/Zotero/storage/6DXCVRM8/full-text.pdf} -} - -@article{Campbell1996, - title = {Creating a {{Database}} of Rapid Prototyping System Capabilities}, - author = {Campbell, R I and Bernie, M.R.N}, - year = {1996}, - journal = {Journal of Materials Processing Technology}, - volume = {0136}, - number = {96}, - keywords = {database,decision support s3,design process,rapid prototyping,stem}, - file = {/Users/fabio/Zotero/storage/QBST73PF/Creating a Database of rapid prototyping system capabilities.pdf} -} - -@techreport{Campbell2011, - title = {Could {{3D Printing Change}} the {{World}}?. {{Technologies}}, {{Potential}}, and {{Implications}} of {{Additive Manufacturing}}}, - author = {Campbell, Thomas and Williams, Christopher and Ivanova, Olga and Garrett, Banning}, - year = {2011}, - journal = {Atlantic Council}, - address = {{Washington, DC}}, - institution = {{Atlantic Council}}, - file = {/Users/fabio/Zotero/storage/G6N97SYV/Could 3D Printing Change the World. Technologies, Potential, and Implications of Additive Manufacturing.pdf} -} - -@article{Campbell2012, - title = {Additive Manufacturing: Rapid Prototyping Comes of Age}, - author = {Campbell, Ian and Bourell, David and Gibson, Ian}, - year = {2012}, - month = jun, - journal = {Rapid Prototyping Journal}, - volume = {18}, - number = {4}, - pages = {255--258}, - issn = {1355-2546}, - doi = {10.1108/13552541211231563}, - file = {/Users/fabio/Zotero/storage/CTDBTI4X/Publishing - 2012 - Available from Deakin Research Online.pdf} -} - -@article{Campbell2013, - title = {{{3D}} Printing of Multifunctional Nanocomposites}, - author = {Campbell, Thomas A. and Ivanova, Olga S.}, - year = {2013}, - journal = {Nano Today}, - volume = {8}, - number = {2}, - pages = {119--120}, - publisher = {{Elsevier Ltd}}, - issn = {1878044X}, - doi = {10.1016/j.nantod.2012.12.002}, - abstract = {Additive manufacturing (aka, 3D printing) holds strong potential for the formation of a new class of multifunctional nanocomposites. With the ability to print complex 3D objects layer by layer, additive manufacturing with nanomaterials could be leveraged in new ways toward greater control over material properties across part dimensions. Multifunctionality through embedding of nanomaterials can further extend capabilities of nanocomposites to properties such as gradients in thermal and electrical conductivity, photonic emissions tunable for wavelength, and increased strength and reduced weight. Here we discuss the promises offered by nanomaterials-based additive manufacturing as a new paradigm for nanocomposite functionality. \textcopyright{} 2012 Elsevier Ltd.}, - isbn = {1748-0132}, - keywords = {3D printing,Additive manufacturing,Nanocomposites,Nanomaterials}, - file = {/Users/fabio/Zotero/storage/RDPNRGBX/3D printing of multifunctional nanocomposites (2013).pdf} -} - -@article{camposEconomicEcologicalBenefits2021, - title = {The Economic and Ecological Benefits of Saving Ecosystems to Protect Services}, - author = {Campos, Felipe S. and David, Jo{\~a}o and {Louren{\c c}o-de-Moraes}, Ricardo and Rodrigues, Pedro and Silva, Bruno and {Vieira da Silva}, Carina and Cabral, Pedro}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {311}, - pages = {127551}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127551}, - urldate = {2021-06-08} -} - -@article{Campuses, - title = {About Changemaker Campuses Changemaker Campus Criteria Overview}, - author = {Campuses, Changemaker} -} - -@article{canado3DPrintingEnable2022, - ids = {canado2022}, - title = {{{3D}} Printing to Enable the Reuse of Marine Plastic Waste with Reduced Environmental Impacts}, - author = {Ca{\~n}ado, Naiara and Lizundia, Erlantz and {Akizu-Gardoki}, Ortzi and Minguez, Rikardo and Lekube, Blanca and Arrillaga, Alex and Iturrondobeitia, Maider}, - year = {2022}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/jiec.13302}, - urldate = {2022-08-11}, - abstract = {Over the years, our oceans have witnessed an enormous accumulation of marine plastic waste resulting from ocean-related economic activities. As plastic pollution adversely affects marine wildlife and habitat, our society requires urgent solutions to address this increasingly alarming dilemma. Here, we turn our attention to circular economy principles to reduce the amount of nonbiodegradable petroleum-based marine litter. We consider a production process based on 3D printing to fabricate products for the marine industry, which uses marine plastic waste as a source material. Additionally, the suitability of virgin bio-based polyamide (bio-PA), polylactic acid (PLA), and polyhydroxybutyrate (PHB) is explored. PHB is selected due to its extraordinary rapid biodegradation in aquatic environments. To quantify the environmental impacts of the proposed processes, a cradle-to-grave life cycle assessment (LCA) is applied according to ISO 14040:2006 and ISO 14044:2006 standards. Different end-of-life alternatives are proposed, including landfill deposition, thermal degradation, and composting. LCA results reveal that the use of marine plastic waste is environmentally preferred in comparison with bio-PA, PLA, and PHB. Specifically, the global warming indicator, considered a prime driver toward sustainability, shows a 3.7-fold decrease in comparison with bio-PA. Importantly, the environmental impacts of PHB production through crude glycerol fermentation are quantified for the first time. Regarding the end-of-life options with a composting scenario, PLA and PHB are preferred as they yield biogenic carbon dioxide (CO2), which can be used as a renewable energy source.}, - copyright = {\textcopyright{} 2022 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of the International Society for Industrial Ecology.}, - langid = {english}, - keywords = {3D printing,bioplastics,circular economy,industrial ecology,life cycle assessment,marine plastic waste}, - file = {/Users/fabio/Zotero/storage/TALRZ65L/Cañado et al_3D printing to enable the reuse of marine plastic waste with reduced.pdf;/Users/fabio/Zotero/storage/5NIY7DNN/jiec.html} -} - -@article{Canessa2017, - title = {Study of {{Moineau-based}} Pumps for the Volumetric Extrusion of Pellets}, - author = {Canessa, Enrique and Baruzzo, Marco and Fonda, Carlo}, - year = {2017}, - month = oct, - journal = {Additive Manufacturing}, - volume = {17}, - pages = {143--150}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2017.08.015}, - file = {/Users/fabio/Zotero/storage/5HJLUKCW/Study of Moineau-based pumps for the volumetric extrusion of pellets.pdf} -} - -@article{canigliaPracticalWisdomVirtue2023, - title = {Practical Wisdom and Virtue Ethics for Knowledge Co-Production in Sustainability Science}, - author = {Caniglia, Guido and Freeth, R. and Luederitz, C. and Leventon, J. and West, S. P. and John, B. and Peukert, D. and Lang, D. J. and {von Wehrden}, H. and {Mart{\'i}n-L{\'o}pez}, B. and Fazey, I. and Russo, F. and {von Wirth}, T. and Schl{\"u}ter, M. and Vogel, C.}, - year = {2023}, - month = jan, - journal = {Nature Sustainability}, - pages = {1--9}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-022-01040-1}, - urldate = {2023-02-09}, - abstract = {Since antiquity, philosophers in the Western tradition of virtue ethics have declared practical wisdom to be the central virtue of citizens involved in public and social life. Practical wisdom is of particular importance when values are conflicting, power is unequal and knowledge uncertain. We propose that practical wisdom and virtue ethics can inform the practice of sustainability researchers by strengthening their capacity to engage with the normative complexities of knowledge co-production when aspiring to contribute to transformative change.}, - copyright = {2023 Springer Nature Limited}, - langid = {english}, - keywords = {Careers,Ethics}, - file = {/Users/fabio/Zotero/storage/D3I6BH5H/Caniglia et al. - 2023 - Practical wisdom and virtue ethics for knowledge c.pdf} -} - -@article{cano-vicentFusedDepositionModelling2021, - title = {Fused Deposition Modelling: {{Current}} Status, Methodology, Applications and Future Prospects}, - author = {{Cano-Vicent}, Alba and Tambuwala, Murtaza M and Hassan, Sk Sarif and Barh, Debmalya and Aljabali, Alaa A A and Birkett, Martin and Arjunan, Arun and {Serrano-Aroca}, Angel}, - year = {2021}, - journal = {Additive Manufacturing}, - volume = {47}, - pages = {2214--8604}, - doi = {10.1016/j.addma.2021.102378}, - urldate = {2021-10-27}, - abstract = {Fused deposition modelling (FDM) is an advanced 3D printing technique for the manufacture of plastic materials. The ease of use, prototyping accuracy and low cost makes it a widely used additive manufacturing technique. FDM creates 3D structures through the layer-by-layer melt-extrusion of a plastic filament. The production of a printed structure involves the generation of a digital design of the model by 3D design software and its execution by the printer until the complete model is reproduced. This review presents the current status of FDM, how to handle and operate FDM printers, industry standards of printing, the types of filaments that can be used, the post-processing treatments, advantages, and limitations as well as an overview of the increasing application fields of FDM technology. The application areas of FDM are endless, including biomedicine, construction, automotive, aerospace, acoustics, textiles, and occupational therapy amongst others. Even during the current Coronavirus disease (COVID-19) pandemic, FDM has helped to fabricate face masks, ventilators and respiratory systems, respiratory valves, and nasopharyngeal swabs for COVID-19 diagnosis. FDM 3D and 4D printing can produce polymeric and composite structures of various designs, and compositions in a range of materials according to the desired application. The review concludes by discussing the future prospects for FDM.}, - isbn = {2021.102378}, - keywords = {3D printing,Biomedical applications,Fused deposition modelling,Scaffolds,Tissue engineering} -} - -@misc{canopeFabLabEcoleAtelier2022, - title = {{\guillemotleft{} FabLab \`a l'\'ecole \guillemotright{} : un atelier de fabrication dans votre \'etablissement}}, - shorttitle = {{\guillemotleft{} FabLab \`a l'\'ecole \guillemotright}}, - author = {Canop{\'e}}, - year = {2022}, - journal = {R\'eseau Canop\'e}, - urldate = {2022-09-20}, - abstract = {\`A l'occasion de la Semaine \guillemotleft{} Je fabrique mon mat\'eriel p\'edagogique \guillemotright, du 9 au 14 mai 2022, d\'ecouvrez le dispositif innovant \guillemotleft{} FabLab \`a l'\'ecole \guillemotright{} d'Universcience et de R\'eseau Canop\'e.}, - howpublished = {https://www.reseau-canope.fr/academie-de-nantes/atelier-canope-44-nantes/actualites/article/fablab-a-lecole-un-atelier-de-fabrication-dans-votre-etablissement-4.html}, - langid = {french}, - file = {/Users/fabio/Zotero/storage/FWS8DXBU/fablab-a-lecole-un-atelier-de-fabrication-dans-votre-etablissement-4.html} -} - -@article{Capasso2019, - title = {Green Growth \textendash{} {{A}} Synthesis of Scientific Findings}, - author = {Capasso, Marco and Hansen, Teis and Heiberg, Jonas and Klitkou, Antje and Steen, Markus}, - year = {2019}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {146}, - pages = {390--402}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.06.013}, - urldate = {2020-05-10}, - abstract = {Governments in countries across the world increasingly adopt the ``green growth'' discourse to underline their ambition for the greening of their economies. The central tenet of this narrative is the economic opportunities rather than challenges arising from the pursuit of environmental sustainability. Our paper synthesises insights from 113 recent scientific articles, dealing with both environmental issues and economic growth, as well as innovation. Our ambition is exploratory in attempting to take stock of heterogeneous contributions across the spectrum of social science. The articles have been reviewed with a focus on six themes, derived from current discussions in economic geography and transition studies: skills, technology, physical resources, markets, institutions and policies. Four major implications emerge from the review. First, green growth requires competences that allow for handling complex, non-routine situations \textendash{} in both the private and the public sector. Second, technological progress should be directed towards greener technologies, to avoid investments funds being channelled to brown technologies for short-term returns. Third, our knowledge of the opportunities for achieving green growth must base upon a joint assessment of market failures, structural system failures and transformational system failures. Finally, greater attention should be devoted to the geography of green growth processes at different scales.}, - keywords = {Geography of innovation,Green growth,Multi-scalar policy,Socio-technical systems,Sustainability transitions,Transformational system failures}, - file = {/Users/fabio/Zotero/storage/4LISPBCP/full-text.pdf} -} - -@article{CAPDEVILA2015, - title = {Co-{{Working Spaces}} and the {{Localised Dynamics}} of {{Innovation}} in {{Barcelona}}}, - author = {CAPDEVILA, {\relax IGNASI}}, - year = {2015}, - journal = {International Journal of Innovation Management}, - volume = {19}, - number = {03}, - pages = {1540004}, - issn = {1363-9196}, - doi = {10.1142/S1363919615400046}, - abstract = {This paper considers a multi-level perspective to analyse the crucial role of individuals and communities outside firms in the localised dynamics of innovation. Through a qualitative study of the communities emerging in co-working spaces (CWSs) in Barcelona, we dis-entangle the different dynamics of innovation involving community insiders and local actors (firms, citizens and governmental bodies). We argue that CWSs act as intermediaries between creative individuals (" the underground ") and innovative firms (" the upper-ground "), contributing to the interaction between co-located actors through the articulation of places, spaces, projects and events. The results lead to suggestions for policies to contribute to the emergence and development of innovation by fostering innovative pro-cesses outside firms.}, - keywords = {coworking spaces,dynamics of innovation,innovation communities,localized innovation,middleground} -} - -@article{Capdevila2015, - title = {Les Diff\'erentes Approches Entrepreneuriales Dans Les Espaces Ouverts d'innovation}, - author = {Capdevila, Ignasi}, - year = {2015}, - month = sep, - journal = {Innovations}, - volume = {n\textdegree{} 48}, - number = {3}, - pages = {87--105}, - issn = {1267-4982}, - doi = {10.3917/inno.048.0087}, - isbn = {9782807300873}, - file = {/Users/fabio/Zotero/storage/LR76DHUQ/m-api-75510e10-19da-7405-2eaa-7717cfc85bac.pdf} -} - -@article{Capoor2017, - title = {Implementation Challenges in Bio-Medical Waste Management Rules, 2016}, - author = {Capoor, Malini and Bhowmik, Kumar}, - year = {2017}, - month = oct, - journal = {Indian Journal of Medical Microbiology}, - volume = {35}, - number = {4}, - pages = {623--625}, - publisher = {{Wolters Kluwer Medknow Publications}}, - issn = {19983646}, - doi = {10.4103/ijmm.IJMM_17_416}, - urldate = {2020-04-08} -} - -@article{capponiBreakthroughInnovationsWhere2022, - title = {Breakthrough Innovations and Where to Find Them}, - author = {Capponi, Giovanna and Martinelli, Arianna and Nuvolari, Alessandro}, - year = {2022}, - month = jan, - journal = {Research Policy}, - volume = {51}, - number = {1}, - pages = {104376}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104376}, - urldate = {2021-09-27} -} - -@article{caprioliUrbanEcosystemServices2020, - title = {Urban {{Ecosystem Services}}: {{A Review}} of {{Definitions}} and {{Classifications}} for the {{Identification}} of {{Future Research Perspectives}}}, - author = {Caprioli, Caterina and Bottero, Marta and Mondini, Giulio}, - year = {2020}, - month = jul, - journal = {Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)}, - volume = {12253 LNCS}, - pages = {332--344}, - publisher = {{Springer, Cham}}, - doi = {10.1007/978-3-030-58814-4_23}, - urldate = {2021-10-22}, - abstract = {Thanks to many initiatives, such as the Millennium Ecosystem Assessment (MEA), The Economics of Ecosystems and Biodiversity (TEEB) and EU target for 2020 on Biodiversity, the topic of ecosystem services has received even more attention both in the academic and political debate. On the contrary, the research on urban ecosystems and urban ecosystem services has yet been relatively modest compared to other ecosystems, like wetlands or forests. However, the relevance of topic requires more efforts in this field also because, in most cases, urban ecosystem services have been studied individually, without considering their role in governance and planning processes. In this context, the present paper has the aim at giving a perspective of the state of the art of the research on urban ecosystem services with a focus on the different definitions and classifications emerging from the literature, as well as of examples of indicators for their valuation. The work highlights the gaps in the research to support the definition of future research perspectives and analysis, in particular for the adoption of valuation approaches able to guide the decision-making process in urban areas and for ensuring the consideration of urban ecosystem services in spatial planning policies and actions.}, - keywords = {Decision-making,Ecosystem services,Evaluation methods,Land-use planning,Resilient city} -} - -@article{CaracteriserLocalementDechets, - title = {Caract\'eriser Localement Les D\'echets M\'enagers}, - isbn = {9791029716096}, - file = {/Users/fabio/Zotero/storage/XB4LEN54/caracteriser_localement_les_dechets_menagers_synthese_thematique_011233.pdf} -} - -@article{Carayannis2012, - title = {The {{Quintuple Helix}} Innovation Model: Global Warming as a Challenge and Driver for Innovation}, - author = {Carayannis, Elias G and Barth, Thorsten D and Campbell, David FJ}, - year = {2012}, - month = aug, - journal = {Journal of Innovation and Entrepreneurship}, - volume = {1}, - number = {1}, - pages = {2}, - publisher = {{Springer Nature}}, - issn = {2192-5372}, - doi = {10.1186/2192-5372-1-2}, - urldate = {2020-11-02}, - abstract = {The Triple Helix innovation model focuses on university-industry-government relations. The Quadruple Helix embeds the Triple Helix by adding as a fourth helix the `media-based and culture-based public' and `civil society'. The Quintuple Helix innovation model is even broader and more comprehensive by contextualizing the Quadruple Helix and by additionally adding the helix (and perspective) of the `natural environments of society'. The Triple Helix acknowledges explicitly the importance of higher education for innovation. However, in one line of interpretation it could be argued that the Triple Helix places the emphasis on knowledge production and innovation in the economy so it is compatible with the knowledge economy. The Quadruple Helix already encourages the perspective of the knowledge society, and of knowledge democracy for knowledge production and innovation. In a Quadruple Helix understanding, the sustainable development of a knowledge economy requires a coevolution with the knowledge society. The Quintuple Helix stresses the necessary socioecological transition of society and economy in the twenty-first century; therefore, the Quintuple Helix is ecologically sensitive. Within the framework of the Quintuple Helix innovation model, the natural environments of society and the economy also should be seen as drivers for knowledge production and innovation, therefore defining opportunities for the knowledge economy. The European Commission in 2009 identified the socioecological transition as a major challenge for the future roadmap of development. The Quintuple Helix supports here the formation of a win-win situation between ecology, knowledge and innovation, creating synergies between economy, society, and democracy. Global warming represents an area of ecological concern, to which the Quintuple Helix innovation model can be applied with greater potential.}, - keywords = {Global warming,Innovation,Knowledge democracy,Knowledge economy,Knowledge production,Knowledge society,Quadruple Helix,Quintuple Helix,Social ecology,Triple Helix}, - file = {/Users/fabio/Zotero/storage/4W3TSTNM/full-text.pdf} -} - -@incollection{Carayannis2012a, - title = {Mode 3 {{Knowledge Production}} in {{Quadruple Helix Innovation Systems}}}, - booktitle = {Mode 3 {{Knowledge Production}} in {{Quadruple Helix Innovation Systems}}}, - author = {Carayannis, Elias G. and Campbell, David F. J.}, - year = {2012}, - pages = {1--63}, - publisher = {{Springer New York}}, - address = {{New York, NY}}, - doi = {10.1007/978-1-4614-2062-0_1}, - urldate = {2020-11-02}, - abstract = {Developed and developing economies alike face increased resource scarcity and competitive rivalry. In this context, science and technology appear as an essen- tial source of competitive and sustainable advantage at national and regional levels. However, the key determinant of their effi cacy is the quality and quantity of entre- preneurship-enabled innovation that unlocks and captures the benefi ts of the science enterprise in the form of private, public, or hybrid goods. Linking basic and applied research with the market, via technology transfer and commercialization mecha- nisms, including government\textendash university\textendash industry partnerships and capital invest- ments, constitutes the essential trigger mechanism and driving force of sustainable competitive advantage and prosperity. In this volume, the authors defi ne the terms and principles of knowledge creation, diffusion, and use, and establish a theoretical framework for their study. In particular, they focus on the ``Quadruple Helix'' model, through which government, academia, industry, and civil society are seen as key actors promoting a democratic approach to innovation through which strategy development and decision-making are exposed to feedback from key stakeholders, resulting in socially accountable policies and practices.}, - file = {/Users/fabio/Zotero/storage/98ZCERKB/full-text.pdf} -} - -@inproceedings{Carballo2005, - title = {Open {{HW}}, Open Design {{SW}}, and the {{VC}} Ecosystem Dilemma}, - booktitle = {Fifth Int. {{Work}}. {{Syst}}. {{Real-time}} Appl.}, - author = {Carballo, J.-A.}, - year = {2005}, - pages = {3--6}, - publisher = {{IEEE}}, - doi = {10.1109/IWSOC.2005.88}, - isbn = {0-7695-2403-6} -} - -@article{Carillo-Aparicio2013c, - title = {{{SmartCity Malaga}}, a Real-Living Lab and Its Adaptation to Electric Vehicles in Cities}, - author = {{Carillo-Aparicio}, Susana and {Heredia-Larrubia}, Juan R and {Perez-Hidalgo}, Francisco}, - year = {2013}, - journal = {Energy Policy}, - volume = {62}, - pages = {774--779}, - publisher = {{Elsevier}}, - issn = {03014215}, - doi = {10.1016/j.enpol.2013.07.125}, - abstract = {The new energy requirements that will be necessary in the coming years will demand a change in the current paradigm of electricity grids. The need to integrate a higher level of renewable resources to achieve the objectives set by the EU (the famous 20-20-20), flattening the load curve, the imminent arrival of electric vehicles, and the possibility of actively controlling all devices connected to a grid, are some examples of these new challenges. In order to maintain the stability of the distribution network, all medium-voltage lines in the city of Malaga (Spain) have been analyzed and modeled over the past five years, to optimize electric-vehicle charging with the use of available energy during the night valley using pricing signal, control of the electric vehicle charging manager and signals from the Distribution Company, with regard to grid availability (vehicle-charging posts) and available energy. The project has developed new management, control and integration systems for all elements of consumption, production and energy storage over the distribution network. All deployment within the SmartCity M??laga Project of ENDESA includes smartmeters for all customers and new automation and communication systems over the grid connected by a broadband Power Line Communication network. ?? 2013 Elsevier Ltd.}, - keywords = {Electric vehicle,Renewable energy,Smartgrid} -} - -@article{CarletonUniversity2013c, - title = {Living {{Labs}} and {{Crowdsourcing Welcome}}}, - author = {{Carleton University}}, - editor = {McPhee, Chris}, - year = {2013}, - journal = {Technology Innovation Management Review}, - volume = {5}, - number = {December}, - pages = {1--45}, - publisher = {{Talent First Network}}, - issn = {1927-0321}, - abstract = {The Technology Innovation Management Review (TIM Review) provides insights about the issues and emerging trends relevant to launching and growing technology businesses. The TIM Review focuses on the theories, strategies, and tools that help small and large technology companies succeed. Our readers are looking for practical ideas they can apply within their own organizations. The TIM Review brings together diverse viewpoints \textendash{} from academics, entrepren- eurs, companies of all sizes, the public sector, the com- munity sector, and others \textendash{} to bridge the gap between theory and practice. In particular, we focus on the topics of technology and global entrepreneurship in small and large companies. We welcome input from readers into upcoming themes. Please visit timreview.ca to suggest themes and nominate authors and guest editors} -} - -@article{carlssonNetworkGovernanceCommons2007, - title = {Network {{Governance}} of the {{Commons}}}, - author = {Carlsson, Lars Gunnar and Sandstr{\"o}m, Annica Charlotte}, - year = {2007}, - month = nov, - journal = {International Journal of the Commons}, - volume = {2}, - number = {1}, - pages = {33}, - publisher = {{Ubiquity Press, Ltd.}}, - doi = {10.18352/IJC.20}, - urldate = {2022-03-13}, - abstract = {The survival of the commons is closely associated with the potential to find ways to strengthen contemporary management systems, making them more responsive to a number of complexities, like the dynamics of ecosystems and related, but often fragmented, institutions. A discussion on the desirability of finding ways to establish so-called cross-scale linkages has recently been vitalised in the literature. In the same vein, concepts like adaptive management, co-management and adaptive co-management have been discussed. In essence, these ways of organizing management incorporate an implicit assumption about the establishment of social networks and is more closely related to network governance and social network theory, than to political administrative hierarchy. However, so far, attempts to incorporate social network analysis (SNA) in this literature have been rather few, and not particularly elaborate. In this paper, a framework for such an approach will be presented. The framework provides an analytical skeleton for the understanding of joint management and the establishment of cross-scale linkages. The relationships between structural network properties - like density, centrality and heterogeneity - and innovation in adaptive co-management systems are highlighted as important to consider when crafting institutions for natural resource management. The paper makes a theoretical and methodological contribution to the understanding of co-management, and thereby to the survival of the commons.} -} - -@article{carlssonreichEconomicAssessmentMunicipal2005, - title = {Economic Assessment of Municipal Waste Management Systems\textemdash Case Studies Using a Combination of Life Cycle Assessment ({{LCA}}) and Life Cycle Costing ({{LCC}})}, - author = {Carlsson Reich, Marcus}, - year = {2005}, - month = feb, - journal = {Journal of Cleaner Production}, - series = {Environmental {{Assessments}} and {{Waste Management}}}, - volume = {13}, - number = {3}, - pages = {253--263}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2004.02.015}, - urldate = {2022-09-13}, - abstract = {This paper examines some possibilities and limitations of linking economic information to an life cycle assessment, LCA, when studying municipal waste management systems. A terminology and methodology for economic assessment of municipal waste management systems is proposed and tested through a case study. The methodology consists of a financial LCC, life cycle costing, (which is used in parallel with an LCA) and an environmental LCC (functioning as a consecutive, weighting tool). In the case study, the financial LCC covers all the costs incurred by the extended waste management system, as though the LCA system was a single economic actor. The environmental LCC uses three different weighting methods to monetarise environmental effects such as emissions and resource use. As both LCCs use the same unit of account, they can easily be added together to a welfare economic tool. This step-by-step aggregation leads to a transparent, reproducible analysis method. A conclusion is that the methodology facilitates the analysis, but that problems remain as municipal waste management often diverge from existing economic systems.}, - langid = {english}, - keywords = {LCC,Life cycle costing,Municipal waste management,Valuation,Weighting}, - file = {/Users/fabio/Zotero/storage/5MP3WAZQ/Carlsson Reich - 2005 - Economic assessment of municipal waste management .pdf;/Users/fabio/Zotero/storage/CR4VX9KZ/S0959652604000885.html} -} - -@article{Carmen2018, - title = {Knowledge Needs for the Operationalisation of the Concept of Ecosystem Services}, - author = {Carmen, Esther and Watt, Allan and Carvalho, Laurence and Dick, Jan and Fazey, Ioan and {Garcia-Blanco}, Gemma and Grizzetti, Bruna and Hauck, Jennifer and Izakovicova, Zita and Kopperoinen, Leena and Liquete, Camino and Odee, David and Steingr{\"o}ver, Eveliene and Young, Juliette}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {441--451}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.10.012}, - abstract = {As environmental challenges and their management are increasingly recognised as complex and uncertain, the concept of ecosystem services has emerged from within scientific communities and is gaining influence within policy communities. To better understand how this concept can be turned into practice we examine knowledge needs from the perspective of the different stakeholders directly engaged with the operationalisation of ecosystem systems concept within ten socio-ecologically different case studies from different countries, levels of governance and ecosystems. We identify four different but interrelated areas of knowledge needs, namely; (i) needs related to develop a common understanding, (ii) needs related to the role of formal and informal institutions in shaping action on the ground, (iii) needs related to linking knowledge and action, and (iv) and needs related to accessible and easy to use methods and tools. These findings highlight the need to view knowledge as a process which is orientated towards action. We discuss the potential to develop transdisciplinary research approaches and the development of tools and methods explicitly as boundary objects in the ecosystem service science community to develop more collaborative practices with other stakeholders and facilitate the operationalisation of the concept of ecosystem services across contexts.}, - keywords = {Ecosystem services,Knowledge needs,Operationalisation,Transdisciplinary research}, - file = {/Users/fabio/Zotero/storage/I2P82YCE/Knowledge-needs-for-the-operationalisation-of-the-concept-_2018_Ecosystem-Se.pdf} -} - -@article{Carmona-Lavado2021, - title = {Does Open Innovation Always Work? {{The}} Role of Complementary Assets}, - author = {{Carmona-Lavado}, Antonio and {Cuevas-Rodr{\'i}guez}, Gloria and {Cabello-Medina}, Carmen and Fedriani, Eugenio M.}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120316}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120316}, - urldate = {2020-10-05}, - abstract = {The aim of this research is twofold: first, to identify Open Innovation (OI) configurations, and second, to analyze which configurations are associated with a high, and which with a low, OI performance. Using a configurational approach (involving complementarity and equifinality), we propose that firms use different OI configurations, by combining three openness practices (high number of alliances, partner diversity, and external R\&D) and four complementary organizational assets (human capital, alliance coordination capabilities, inter-organizational learning capabilities, and patenting orientation), and that such configurations affect OI performance. We conducted a survey study on the Spanish biotech industry. A sample of 75 companies was analyzed using fuzzy-set qualitative comparative analysis (fsQCA). The results revealed seven high-performing configurations and six low-performing configurations. Configurations combining one or more OI practices and complementary organizational assets achieved a high OI performance, while open configurations lacking the necessary organizational assets were not successful. Closed configurations also performed poorly. The theoretical and managerial implications are discussed.}, - keywords = {Alliance coordination capabilities,Human capital,Inter-organizational learning capabilities,Open innovation,Patenting orientation,R\&D}, - file = {/Users/fabio/Zotero/storage/XI3XSERE/full-text.pdf} -} - -@article{Carmona2017, - title = {Material {{Services}} with Both Eyes Wide Open}, - author = {Carmona, Luis Gabriel and Whiting, Kai and Carrasco, Angeles and Sousa, T{\^a}nia and Domingos, Tiago}, - year = {2017}, - month = aug, - journal = {Sustainability (Switzerland)}, - volume = {9}, - number = {9}, - pages = {1508}, - publisher = {{MDPI AG}}, - issn = {20711050}, - doi = {10.3390/su9091508}, - urldate = {2021-03-28}, - abstract = {Energy has been at the forefront of the sustainable development discourse for quite some time as policymakers, industry heads and society at large have taken progressive steps to cut carbon via renewable energy technologies and energy efficiency measures. Unfortunately, some of these methods have given rise to perverse socio-environmental effects; as materials have been unnecessarily sacrificed, mines and wells have opened and plantations grown, in the name of energy saving. This paper contributes to clean energy-orientated policies and practices by exploring the discipline of sustainable materials. We first review two strategies: energy efficiency linked to materials; and material efficiency, meaning "doing more with less." We find that, although both contribute significantly, they are hampered by the rebound effect and their focus on "doing less bad" rather than "good". Furthermore, they do not in themselves evaluate the services and societal wellbeing that materials provide. We then define "material services" and propose a wider strategy that encompasses and enhances the previous two. Under the new strategy, we argue that sustainable materials should be considered as those that do no harm and which optimally, through the services provided, contribute to better sustainable development policies and practices.}, - keywords = {Material consumption,Material efficiency,Material footprint,Material stock,Service efficiency,Sustainable development goals,Sustainable materials}, - file = {/Users/fabio/Zotero/storage/5XNNJKZS/full-text.pdf} -} - -@article{Carneiro2015, - title = {Fused Deposition Modeling with Polypropylene}, - author = {Carneiro, O.S. and Silva, A.F. and Gomes, R.}, - year = {2015}, - month = oct, - journal = {Materials \& Design}, - volume = {83}, - pages = {768--776}, - publisher = {{Elsevier Ltd}}, - issn = {02641275}, - doi = {10.1016/j.matdes.2015.06.053}, - abstract = {This paper addresses the potential of polypropylene (PP) as a candidate for fused deposition modeling (FDM)-based 3D printing technique. The entire filament production chain is evaluated, starting with the PP pellets, filament production by extrusion and test samples printing. This strategy enables a true comparison between parts printed with parts manufactured by compression molding, using the same grade of raw material. Printed samples were mechanically characterized and the influence of filament orientation, layer thickness, infill degree and material was assessed. Regarding the latter, two grades of PP were evaluated: a glass-fiber reinforced and a neat, non-reinforced, one. The results showed the potential of the FDM to compete with conventional techniques, especially for the production of small series of parts/components; also, it was showed that this technique allows the production of parts with adequate mechanical performance and, therefore, does not need to be restricted to the production of mockups and prototypes.}, - keywords = {Filament orientation,Fused deposition modeling (FDM),Glass reinforced polypropylene (GRPP),Infill degree,Layer thickness,Polypropylene (PP)}, - file = {/Users/fabio/Zotero/storage/I2EHYKKQ/Fused deposition modeling with polypropylene.pdf} -} - -@article{carpenterScienceManagingEcosystem2009, - title = {Science for Managing Ecosystem Services: {{Beyond}} the {{Millennium Ecosystem Assessment}}}, - author = {Carpenter, Stephen R. and Mooney, Harold A. and Agard, John and Capistrano, Doris and Defries, Ruth S. and Diaz, Sandra and Dietz, Thomas and Duraiappah, Anantha K. and {Oteng-Yeboah}, Alfred and Pereira, Henrique Miguel and Perrings, Charles and Reid, Walter V. and Sarukhan, Jose and Scholes, Robert J. and Whyte, Anne}, - year = {2009}, - month = feb, - journal = {Proceedings of the National Academy of Sciences of the United States of America}, - volume = {106}, - number = {5}, - pages = {1305--1312}, - issn = {00278424}, - doi = {10.1073/pnas.0808772106}, - urldate = {2021-04-21}, - abstract = {The Millennium Ecosystem Assessment (MA) introduced a new framework for analyzing social-ecological systems that has had wide influence in the policy and scientific communities. Studies after the MA are taking up new challenges in the basic science needed to assess, project, and manage flows of ecosystem services and effects on human well-being. Yet, our ability to draw general conclusions remains limited by focus on discipline-bound sectors of the full social-ecological system. At the same time, some polices and practices intended to improve ecosystem services and human well-being are based on untested assumptions and sparse information. The people who are affected and those who provide resources are increasingly asking for evidence that interventions improve ecosystem services and human well-being. New research is needed that considers the full ensemble of processes and feedbacks, for a range of biophysical and social systems, to better understand and manage the dynamics of the relationship between humans and the ecosystems on which they rely. Such research will expand the capacity to address fundamental questions about complex social- ecological systems while evaluating assumptions of policies and practices intended to advance human well-being through improved ecosystem services. \textcopyright{} 2009 by The National Academy of Sciences of the USA.}, - pmid = {19179280}, - file = {/Users/fabio/Zotero/storage/P6UP2HDZ/full-text.pdf} -} - -@article{carraresiHowDoesBusiness2021, - ids = {carraresi2021,carraresi2021b}, - title = {How Does Business Model Redesign Foster Resilience in Emerging Circular Value Chains?}, - author = {Carraresi, Laura and Br{\"o}ring, Stefanie}, - year = {2021}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {289}, - pages = {125823}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.125823}, - urldate = {2021-01-12}, - isbn = {2021.125823}, - keywords = {Business model innovation,By-product valorisation,Cross-industry relationships,Resilience,Sustainability transition,Value creation}, - file = {/Users/fabio/Zotero/storage/JUTMGBIX/full-text.pdf} -} - -@article{Carrasco2010, - title = {Processing of Poly(Lactic Acid): {{Characterization}} of Chemical Structure, Thermal Stability and Mechanical Properties}, - author = {Carrasco, F. and Pag{\`e}s, P. and {G{\'a}mez-P{\'e}rez}, J. and Santana, O.O. and Maspoch, M.L.}, - year = {2010}, - month = feb, - journal = {Polymer Degradation and Stability}, - volume = {95}, - number = {2}, - pages = {116--125}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2009.11.045}, - urldate = {2014-09-25}, - file = {/Users/fabio/Zotero/storage/68VHD6DA/Carrasco et al. - 2010 - Processing of poly(lactic acid) Characterization of chemical structure, thermal stability and mechanical proper.pdf} -} - -@article{carreraEnvironmentalSustainabilityMachine2023, - title = {Environmental Sustainability: {{A}} Machine Learning Approach for Cost Analysis in Plastic Recycling Classification}, - shorttitle = {Environmental Sustainability}, - author = {Carrera, Berny and Mata, Judit Bazin and Pi{\~n}ol, Victor Luid and Kim, Kwanho}, - year = {2023}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {197}, - pages = {107095}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107095}, - urldate = {2023-07-06}, - abstract = {Recycling plastics can reduce waste generation and improve waste management, but the recycling industry needs both cost reduction and increased revenue to be economically viable. Recently, recycling plastic classification techniques with Artificial Intelligence have gained popularity, as they can avoid manual sorting, which is time-consuming and economically less profitable than automatidc processing. In this paper, we provide an economic framework for quality sorting control by classifying plastics based on the infrared spectrum of polymers and machine learning algorithms. In addition, the suggested framework offers a method for selecting the algorithm according to the polymer's income class and the highest economic advantages. Furthermore, our experiments probe that Fourier-transform infrared (FTIR) and near-infrared (NIR) spectroscopies combined with machine learning algorithms are suitable for plastic classification as four datasets and seven machine learning algorithms have been tested to classify Polyethylene (PE), Polypropylene (PP), Polyethylene terephthalate (PET), polystyrene (PS), and Polyvinyl chloride (PVC).}, - langid = {english}, - keywords = {Environment,Machine learning classification,Optimization,Plastic recycling industry,Plastic recycling revenue,Profitable plastics,Quality sorting,Sustainable cities,Waste management}, - file = {/Users/fabio/Zotero/storage/QDS9KN2W/S0921344923002318.html} -} - -@article{carreraMachineLearningBased2022, - title = {A Machine Learning Based Classification Models for Plastic Recycling Using Different Wavelength Range Spectrums}, - author = {Carrera, Berny and Pi{\~n}ol, Victor Luid and Mata, Judit Bazin and Kim, Kwanho}, - year = {2022}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {374}, - pages = {133883}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133883}, - urldate = {2022-09-18}, - abstract = {Currently, the use and production of plastic are on the rising trend, leading to the increase in waste generation and consumption of raw materials, making it one of the most significant issues facing densely populated cities. As a result, plastic waste management is becoming one of society's primary concerns, as it has direct effects on the environment and sustainability of urban areas. However, the identification and classification of the different types of plastic remains a challenge, as current techniques still face limitations. Unfortunately, identification technologies cannot classify many types of plastic, and often a particular technology is used to classify certain types of plastic. In this study, we propose a classification methodology that analyses the use of different machine learning algorithms based on the infrared spectrum of polymers. This proposed classification methodology will be able to identify spectrums obtained from different wavelength ranges, including near-infrared spectroscopy (NIR) and mid-infrared spectroscopy (MWIR). Moreover, this study proposes a solution to the classification of black plastic, as well as common recycled plastics such as Polypropylene (PP), Polystyrene (PS), Polyethylene (PE), Polyvinyl chloride (PVC), and Polyethylene terephthalate (PET). Experiments were conducted using eleven machine learning classification algorithms, and a comparative analysis of their performance was presented. The results indicate that five out of eleven classifiers achieved over 95\% on the four metrics analyzed (accuracy, precision, recall and f1-score), with the Multi-layer Perceptron (MLP) Classifier achieving 99.72\% accuracy, 99.35\% precision, 99.82\% recall, and 99.58\% f1-score.}, - langid = {english}, - keywords = {Classification,Data analysis,Machine learning,Plastic waste recycling,Time-series analysis,Wavelength} -} - -@article{Carrion2019, - title = {Powder {{Recycling Effects}} on the {{Tensile}} and {{Fatigue Behavior}} of {{Additively Manufactured Ti-6Al-4V Parts}}}, - author = {Carrion, Patricio E. and {Soltani-Tehrani}, Arash and Phan, Nam and Shamsaei, Nima}, - year = {2019}, - month = mar, - journal = {JOM}, - volume = {71}, - number = {3}, - pages = {963--973}, - issn = {1047-4838}, - doi = {10.1007/s11837-018-3248-7} -} - -@article{Carron2021, - title = {Landscape {{Design}} to {{Meet}} the {{Societal Demand}} for {{Ecosystem Services}}: {{A Perspective}}}, - author = {Carron, Bjoke and Muys, Bart and Van Orshoven, Jos and Leinfelder, Hans}, - year = {2021}, - month = sep, - journal = {Challenges in Sustainability}, - volume = {9}, - number = {1}, - pages = {28--44}, - issn = {2297-6477}, - doi = {10.12924/cis2021.09010028}, - urldate = {2021-09-21}, - abstract = {In recent decades, the concept of Ecosystem Services (ES) has generated a paradigm shift in the perspective of human society on nature and has had an important awareness-raising role concerning the importance of ecosystems. However, the concept has not been capable to stop the loss of biodiversity and nature in order to meet the societal challenges of ES provision, especially in urbanized territories. From the reviewed literature, it is obvious that implementing the ES concept within spatial design and planning processes poses several difficulties. In this context we state that a more comprehensive approach is needed of which the ES concept is part. To move to genuine landscape change and a shift in land use and land stewardship, we argue that a landscape design approach can play a significant activating role. The goal of this paper is to underpin this assumption from a theoretical and methodological point of view. The paper first gives an overview of the difficulties that the field of ES science and practice is facing when implementing the ES concept in landscape design and planning processes. Then a landscape design approach is presented as an alternative approach and a possible way forward for genuine landscape change to meet the societal demand for ES.}, - keywords = {Ecosystem services cascade,Ecosystem services critique,Landscape change,Landscape design and planning,Research through design}, - file = {/Users/fabio/Zotero/storage/W3QATARL/full-text.pdf} -} - -@article{carrozzomagliCoordinationGamesVs2022, - title = {Coordination Games vs Prisoner's Dilemma in Sustainability Games: {{A}} Critique of Recent Contributions and a Discussion of Policy Implications}, - author = {Carrozzo Magli, Alessio and Manfredi, Piero}, - year = {2022}, - month = feb, - journal = {Ecological Economics}, - volume = {192}, - pages = {107268}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107268}, - urldate = {2021-11-07} -} - -@article{Carvalho2022, - title = {Nature-Based Solutions Addressing the Water-Energy-Food Nexus: {{Review}} of Theoretical Concepts and Urban Case Studies}, - author = {Carvalho, Pedro N. and Finger, David Christian and Masi, Fabio and Cipolletta, Giulia and Oral, Hasan Volkan and T{\'o}th, Attila and Regelsberger, Martin and Exposito, Alfonso}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {338}, - pages = {130652}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2022.130652}, - urldate = {2022-02-09}, - abstract = {An increasing world population is projected to increase water, energy and food requirements, three vital resources for humankind. Projected climate change impacts will aggravate water availability, as well as flood risks, especially in urban areas. Nature-based solutions (NBS) have been identified as key concepts to defuse the expected tensions within the Water-Energy-Food (W-E-F) nexus due to their multiple benefits. In this paper, the authors outlined the theories and concepts, analyzed real-life case studies, and discussed the potential of NBS to address the future W-E-F nexus. For this purpose, we performed a systematic literature review on the theories of NBS that address the W-E-F nexus, and we summarized 19 representative real-life case studies to identify the current knowledge gaps and challenges. The quantitative and qualitative data was used to differentiate and discuss the direct and indirect potential benefits of NBS to the W-E-F nexus. The study further expanded on the challenges for the implementation of NBS and highlighted the growing possibilities in the context of circularity and the implementation of NBS in urban planning. It was concluded that the potential impacts of NBS on the W-E-F nexus have been identified, but the quantitative effects have not been analyzed in-depth. Moreover, indicators are mostly single-purpose and not multipurpose, as required to fully characterize the W-E-F nexus and circularity holistically. Overall, there is a need to adopt systemic thinking and promote the multipurpose design of NBS.}, - keywords = {Circular cities,Green infrastructure,Nature-based solution (NBS),Resource efficiency,Urban sustainability,W-E-F nexus}, - file = {/Users/fabio/Zotero/storage/YT9H5RJY/full-text.pdf} -} - -@article{casas-ledonUnderstandingDynamicsHuman2023, - title = {Understanding the Dynamics of Human Appropriation on Ecosystems via an Exergy-Based Net Primary Productivity Indicator: {{A}} Case Study in South-Central {{Chile}}}, - shorttitle = {Understanding the Dynamics of Human Appropriation on Ecosystems via an Exergy-Based Net Primary Productivity Indicator}, - author = {{Casas-Led{\'o}n}, Yannay and Andrade, Cinthya and Salazar, Camila and {Mart{\'i}nez-Mart{\'i}nez}, Yenisleidy and Aguayo, Mauricio}, - year = {2023}, - month = aug, - journal = {Ecological Economics}, - volume = {210}, - pages = {107862}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107862}, - urldate = {2023-05-11}, - abstract = {Human appropriation analysis allows interrelating ecological and socioeconomic dimensions to be applied during the development of management strategies for increasing the sustainability of land uses. However, the design of such management strategies requires data reflecting site-specific conditions at sub-national levels. In this study, we assessed the dynamics of human appropriation using an exergy-based net primary production (HANPPEX) indicator. The results depicted positive (5\textendash 10 MJex/m2.y) HANPPEX changes for cropland areas in both regions. The harvested biomass and land-use changes were identified as responsible for high HANPPEX, which varied significantly between land cover types. In particular, cropland and urban/industrial yielded the highest HANPPEX compared to other land cover types. Accordingly, the land cover transition toward urban and agriculture land uses increased the HANPPEX for \~Nuble and Biob\'io. The main HANPP differences found between regions were related to their socioeconomic characteristics as well as to the heterogeneity of land-use types, biomass structure, and regional biomass demand. Our findings provide insights on the magnitude and direction of NPP changes associated with human appropriation at the regional level, allowing a more detailed understanding of the efficiency with which humans utilize terrestrial natural resources.}, - langid = {english}, - keywords = {Human appropriation,Land-use change,Land-use efficiency,Net primary productivity}, - file = {/Users/fabio/Zotero/storage/9AHTVP8B/Casas-Ledón et al. - 2023 - Understanding the dynamics of human appropriation .pdf;/Users/fabio/Zotero/storage/J67QTNHJ/S0921800923001258.html} -} - -@article{cashKnowledgeSystemsSustainable2003, - title = {Knowledge Systems for Sustainable Development}, - author = {Cash, David W. and Clark, William C. and Alcock, Frank and Dickson, Nancy M. and Eckley, Noelle and Guston, David H. and J{\"a}ger, Jill and Mitchell, Ronald B.}, - year = {2003}, - month = jul, - journal = {Proceedings of the National Academy of Sciences of the United States of America}, - volume = {100}, - number = {14}, - pages = {8086--8091}, - issn = {00278424}, - doi = {10.1073/pnas.1231332100}, - urldate = {2021-04-29}, - abstract = {The challenge of meeting human development needs while protecting the earth's life support systems confronts scientists, technologists, policy makers, and communities from local to global levels. Many believe that science and technology (S\&T) must play a more central role in sustainable development, yet little systematic scholarship exists on how to create institutions that effectively harness S\&T for sustainability. This study suggests that efforts to mobilize S\&T for sustainability are more likely to be effective when they manage boundaries between knowledge and action in ways that simultaneously enhance the salience, credibility, and legitimacy of the information they produce. Effective systems apply a variety of institutional mechanisms that facilitate communication, translation and mediation across boundaries.}, - pmid = {12777623}, - file = {/Users/fabio/Zotero/storage/HFLTRAJX/full-text.pdf} -} - -@article{Castelan2010, - title = {Polym\`eres Biod\'egradables}, - author = {Castelan, Guy}, - year = {2010}, - journal = {Techniques de l'ingenieur}, - volume = {33}, - number = {0}, - file = {/Users/fabio/Zotero/storage/G3BYKFJ8/Polymères biodégradables.pdf} -} - -@article{Castellani2019, - title = {Environmental Impacts of Household Consumption in {{Europe}}: {{Comparing}} Process-Based {{LCA}} and Environmentally Extended Input-Output Analysis}, - author = {Castellani, Valentina and Beylot, Antoine and Sala, Serenella}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {240}, - pages = {117966}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117966} -} - -@article{castellarNaturebasedSolutionsCoupled2022, - title = {Nature-Based Solutions Coupled with Advanced Technologies: {{An}} Opportunity for Decentralized Water Reuse in Cities}, - author = {Castellar, Joana A.C. and Torrens, Antonina and Buttiglieri, Gianluigi and Moncl{\'u}s, Hector and Arias, Carlos A. and Carvalho, Pedro N. and Galvao, Ana and Comas, Joaquim}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {340}, - pages = {130660}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130660}, - urldate = {2022-02-09} -} - -@article{Casteloes2017, - title = {The Interaction of Surfactants with Plastic and Copper Plumbing Materials during Decontamination}, - author = {Casteloes, Karen S. and Mendis, Gamini P. and Avins, Holly K. and Howarter, John A. and Whelton, Andrew J.}, - year = {2017}, - month = mar, - journal = {Journal of Hazardous Materials}, - volume = {325}, - pages = {8--16}, - publisher = {{Elsevier B.V.}}, - issn = {03043894}, - doi = {10.1016/j.jhazmat.2016.11.067}, - urldate = {2020-04-08}, - abstract = {The study goal was to examine the effectiveness of surfactants to decontaminate plastic and copper potable water plumbing components. Several common potable water pipe and gasket plastics were examined as well as Alconox\textregistered detergent, Dawn\textregistered soap, and MAGIT-DG 100 surfactants. Results showed that the MAGIT-DG 100 solutions permeated all plastics within 3 days, effectively compromising tensile strength (-82\%), physical dimension (+43\% volume, +45\% weight), and oxidative resistance (-15\%). A variety of MAGIT-DG 100 solution compounds permeated plastic samples, not just the declared major ingredient. PVC and cPVC pipes sorbed the least amount of this solution's components of all the plastic pipes tested. Alconox\textregistered and Dawn\textregistered solutions caused minimal changes to the physical and mechanical properties of all plastics examined. Crosslinked polyethylene type A (PEX-a) pipe was more susceptible to crude oil contamination than copper pipe. Flushing with a pure water Alconox\textregistered solution mixture removed all benzene, toluene, ethylbenzene, and total xylenes (BTEX) from copper pipe. No decontamination method affected BTEX removal from PEX pipe. Under certain conditions surfactant solutions have the potential to alter material integrity and may not be a viable option in removing hydrophobic organic compounds from plastic pipe.}, - keywords = {Chemicals,Decontamination,Drinking water,Infrastructure,Plastic,Surfactant}, - file = {/Users/fabio/Zotero/storage/B3FZ7UUX/full-text.pdf} -} - -@article{Caster1998, - title = {Rapid Prototyping of an Adaptive Noise Canceler Using {{GRAPE}}}, - author = {De Caster, Luc and Lauwereins, Rudy and Peperstraete, J A}, - year = {1998}, - journal = {Signl Processing}, - volume = {64}, - pages = {61--70}, - keywords = {rapid prototyping}, - file = {/Users/fabio/Zotero/storage/UHPPF8U9/Rapid prototyping of an adaptive noise canceler using GRAPE.pdf} -} - -@article{castiglioneSustainableProductionNetworks2022, - ids = {castiglione2022a}, - title = {Sustainable Production Networks: {{A}} Design Methodology Based on the Cooperation among Stakeholders}, - author = {Castiglione, Claudio and Fiore, Eleonora}, - year = {2022}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {362}, - pages = {132308}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.132308}, - urldate = {2022-05-28}, - keywords = {Eco-efficiency,Holistic diagnosis,Industrial symbiosis,Sustainability indicators,Sustainable production systems,Systemic design}, - file = {/Users/fabio/Zotero/storage/XYJVKZPQ/Castiglione y Fiore - 2022 - Sustainable production networks A design methodol.pdf;/Users/fabio/Zotero/storage/9WLV8SVH/S0959652622019126.html} -} - -@article{Castro-Aguirre2016, - title = {Poly(Lactic Acid)\textemdash{{Mass}} Production, Processing, Industrial Applications, and End of Life}, - author = {{Castro-Aguirre}, E. and {I{\~n}iguez-Franco}, F. and Samsudin, H. and Fang, X. and Auras, R.}, - year = {2016}, - month = apr, - journal = {Advanced Drug Delivery Reviews}, - publisher = {{Elsevier B.V.}}, - issn = {0169409X}, - doi = {10.1016/j.addr.2016.03.010}, - abstract = {Global awareness of material sustainability has increased the demand for bio-based polymers like poly(lactic acid) (PLA), which are seen as a desirable alternative to fossil-based polymers because they have less environmental impact. PLA is an aliphatic polyester, primarily produced by industrial polycondensation of lactic acid and/or ring-opening polymerization of lactide. Melt processing is the main technique used for mass production of PLA products for the medical, textile, plasticulture, and packaging industries. To fulfill additional desirable product properties and extend product use, PLA has been blended with other resins or compounded with different fillers such as fibers, and micro- and nanoparticles. This paper presents a review of the current status of PLA mass production, processing techniques and current applications, and also covers the methods to tailor PLA properties, the main PLA degradation reactions, PLA products' end-of-life scenarios and the environmental footprint of this unique polymer.}, - isbn = {0169-409X}, - pmid = {27046295}, - keywords = {Bio-based,Compostable,Degradation,Hydrolysis,Lactide,Life cycle assessment,Polylactic acid,Polymer processing}, - file = {/Users/fabio/Zotero/storage/CHNQGJDN/Castro-Aguirre et al. - 2016 - Poly(lactic acid)—Mass production, processing, industrial applications, and end of life.pdf} -} - -@article{castroReboundEffectCircular2022, - title = {The Rebound Effect of Circular Economy: {{Definitions}}, Mechanisms and a Research Agenda}, - author = {Castro, Camila Gon{\c c}alves and Trevisan, Adriana Hofmann and Pigosso, Daniela C.A. and Mascarenhas, Janaina}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {345}, - pages = {131136}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131136}, - urldate = {2022-03-14} -} - -@article{castroSystemsthinkingEnvironmentalPolicy2022, - title = {Systems-Thinking for Environmental Policy Coherence: {{Stakeholder}} Knowledge, Fuzzy Logic, and Causal Reasoning}, - shorttitle = {Systems-Thinking for Environmental Policy Coherence}, - author = {Castro, Cyndi}, - year = {2022}, - month = oct, - journal = {Environmental Science \& Policy}, - volume = {136}, - pages = {413--427}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.07.001}, - urldate = {2022-08-11}, - abstract = {Environmental policies are often chosen according to physical characteristics that disregard the complex interactions between decision-makers, society, and nature. Environmental policy resistance has been identified as stemming from such complexities, yet we lack an understanding of how social and physical factors interrelate to inform policy design. The identification of synergies and trade-offs among various management strategies is necessary to generate optimal results from limited institutional resources. Participatory modeling has been used within the environmental community to aid decision-making by bringing together diverse stakeholders and defining their shared understanding of complex systems, which are commonly depicted by causal feedbacks. While such approaches have increased awareness of system complexity, causal diagrams often result in numerous feedback loops that are difficult to disentangle without further, data-intensive modeling. When investigating the complexities of human decision-making, we often lack robust empirical datasets to quantify human behavior and environmental feedbacks. Fuzzy logic may be used to convert qualitative relationships into semi-quantitative representations for numerical simulation. However, sole reliance upon computer-simulated outputs may obscure our understanding of the underlying system dynamics. Therefore, the aim of this study is to present and demonstrate a mixed-methods approach for better understanding: 1) how the system will respond to unique management strategies, in terms of policy synergies and conflicts, and 2) why the system behaves as such, according to causal feedbacks embedded within the system dynamics. This framework is demonstrated through a case study of nature-based solutions and policymaking in Houston, Texas, USA.}, - langid = {english}, - keywords = {Causal loop mapping,Fuzzy cognitive mapping,Nature-based solutions,Participatory modeling,Policy coherence,Policy resistance}, - file = {/Users/fabio/Zotero/storage/7KKSQCZU/Castro_2022_Systems-thinking for environmental policy coherence.pdf;/Users/fabio/Zotero/storage/SBK2H22B/S146290112200209X.html} -} - -@article{catalanScientificTechnologicalCrossspace2020, - title = {The Scientific and Technological Cross-Space: {{Is}} Technological Diversification Driven by Scientific Endogenous Capacity?}, - author = {Catal{\'a}n, Pablo and Navarrete, Carlos and Figueroa, Felipe}, - year = {2020}, - month = jun, - journal = {Research Policy}, - pages = {104016}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104016}, - urldate = {2020-06-15} -} - -@inproceedings{Catania2014, - title = {An Approch for Monitoring and Smart Planning of Urban Solid Waste Management Using Smart-{{M3}} Platform}, - booktitle = {Conference of {{Open Innovation Association}}, {{FRUCT}}}, - author = {Catania, Vincenzo and Ventura, Daniela}, - year = {2014}, - pages = {24--31}, - publisher = {{IEEE Computer Society}}, - issn = {23057254}, - doi = {10.1109/FRUCT.2014.6872422}, - urldate = {2021-09-23}, - abstract = {Solid waste management is one of the most important challenges in urban areas throughout the world and it is becoming a critical issue in developing countries where a rapid increase in population has been observed. Waste collection is a complex process that requires the use of large amount of money and an elaborate management of logistics. In this paper an approch to smart waste collection is proposed able to improve and optimize the handling of solid urban waste. Context of smart waste management requires interconnection among heterogeneous devices and data sharing involving a large amount of people. Smart-M3 platform solves these problems offering a high degree of decoupling and scalability.Waste collection is made by real-time monitoring the level of bin's fullness through sensors placed inside the containers. This method enables to exempt from collecting semi-empty bins. Furthermore, incoming data can be provided to decisional algorithms in order to determine the optimal number of waste vehicles or bins to distribute in the territory. The presented solution gives important advantages for both service providers and consumers. The formers could obtain a sensible cost reduction. On the other hand, users may benefit from a higher level of service quality. In order to make users feel closer to their community, they can interact with the system to be aware about the fulness state of the nearest bins. Finally, a mechanism for collecting 'green points' was introduced for encouraging citizens to recycle. \textcopyright{} 2014 FRUCT.}, - isbn = {978-5-7577-0463-0} -} - -@inproceedings{CehovinZajc2019, - title = {Teaching with Open-Source Robotic Manipulator}, - booktitle = {Adv. {{Intell}}. {{Syst}}. {{Comput}}.}, - author = {{\v C}ehovin Zajc, Luka and Rezelj, An{\v z}e and Sko{\v c}aj, Danijel}, - year = {2019}, - month = apr, - volume = {829}, - pages = {189--198}, - publisher = {{Springer Verlag}}, - issn = {21945357}, - doi = {10.1007/978-3-319-97085-1_19}, - abstract = {In this paper we present and evaluate the usage of an open-source robotic manipulator platform, that we have developed, in the context of various educational scenarios that we have conducted. The system was tested in multiple diverse learning scenarios, ranging from a summer school for primary-school students, to the course at the university level study. We show that the introduction of the system in the educational process improves the motivation as well as acquired knowledge of the participants.}, - isbn = {978-3-319-97084-4}, - keywords = {Education,Evaluation,Open-hardware,Open-source,Robotic manipulator} -} - -@article{Celhay2019, - title = {Package Graphic Design and Communication across Cultures: {{An}} Investigation of {{Chinese}} Consumers' Interpretation of Imported Wine Labels}, - author = {Celhay, Franck and Cheng, Peiyao and Masson, Josselin and Li, Wenhua}, - year = {2019}, - month = jul, - journal = {International Journal of Research in Marketing}, - issn = {01678116}, - doi = {10.1016/j.ijresmar.2019.07.004} -} - -@article{Celi2020, - title = {Trends as {{Future Prompts}} in the {{Anticipatory Design Practice}}}, - author = {Celi, Manuela and Colombi, Chiara}, - year = {2020}, - month = apr, - journal = {Futures}, - publisher = {{Elsevier BV}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102564}, - urldate = {2020-05-12} -} - -@article{Celik2011, - title = {Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: {{Case}} Study for a Sample in-Line Drip Emitter}, - author = {Celik, H. Kursat and Karayel, Davut and Caglayan, Nuri and Rennie, Allan E.W. and Akinci, Ibrahim}, - year = {2011}, - month = mar, - journal = {Virtual and Physical Prototyping}, - volume = {6}, - number = {1}, - pages = {47--56}, - issn = {1745-2759}, - doi = {10.1080/17452759.2010.525215}, - urldate = {2014-02-02}, - file = {/Users/fabio/Zotero/storage/6MJ5UU2Y/Celik et al. - 2011 - Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment Case study for a.pdf} -} - -@book{Celik2018, - title = {Design and {{Analysis}} of {{Experiments}}}, - author = {{\c C}elik, Ali and Yaman, Halil and Turan, Servet and Kara, Alpagut and Kara, Ferhat and Zhu, Baojun and Qu, Xuanhui and Tao, Ying and Zhu, Zicheng and Dhokia, Vimal and Nassehi, Aydin and Newman, Stephen T. and Zheng, Lei and Neville, Anne and Gledhill, Andrew and Johnston, David and Zhang, Haiou and Xu, Jifu Jipeng and Wang, Guilan and Zhang, Xinyue and Guo, Zhimeng and Chen, Cunguang and Yang, Weiwei and Zhang, Kai and Wang, Shuhao Shijie and Liu, Weijun and Shang, Xiaofeng and Boraty{\'n}ski, T. and Roczniak, P. and {\.Z}elazo, N. and Zaky, M. T. and Yunn, Heng Shye and Muhamad, Norhamidi and Sulong, Abu Bakar and Fayyaz, Abdolali and Li, Haw Pei and Amin, Sri Yulis Binti M. and Othman, Muhamad Ridhwan Bin H. and Empeni, Dominic Anak and Yu, Jun and Rombouts, Marleen and Maes, Gert and Motmans, Filip and Yin, L. and Peng, H. X. and Yang, L. and Su, Bo and Yamazaki, Taku and Yadollahi, Aref and Shamsaei, Nima and Thompson, Scott M. and Seely, Denver W. and Wu, G. and Langrana, N. A. and Sadanji, R. and Danforth, S. C and Wormsen, Anders and Fjeldstad, Arne and Kirkemo, Finn and Muff, Anthony David and Rein{\aa}s, Lorents and Macdonald, Kenneth A. and Avice, Marc and Fjeldstad, Arne and Rein{\aa}s, Lorents and Macdonald, Kenneth A. and Berg, Espen and Muff, Anthony David and Gulbrandsen, Egil and Rein{\aa}s, Lorents and Macdonald, Kenneth A. and Muff, Anthony David and Fjeldstad, Arne and Rein{\aa}s, Lorents and Macdonald, Kenneth A. and Muff, Anthony David and Wong, Kaufui V. and Hernandez, Aldo and Williams, Christopher B. and Mistree, Farrokh and Rosen, David W. and Williams, Nick and Whittaker, Paul and Whittaker, David and Williams, Bernard and Whyman, Sean and Arif, Khalid Mahmood and Potgieter, Johan and Niinomi, Mitsuo and Wen, Jiaxin and Xie, Zhipeng and Cao, Wenbin and Yang, Xianfeng and Wen, Guian and Cao, Peng and Gabbitas, Brian and Zhang, Deliang and Edmonds, Neil and Wang, Che Chung and Lin, Tao Wei Tzer Long and Hu, Shr Shiung and Wang, Xu and Fang, Zhigang Zak and Sohn, Hong Yong and Li, Ruidi and Shi, Yusheng and Wang, Zhigang Zemin and Wang, Li and Liu, Jinhui Jiancheng and Jiang, Wei and Stender, Michael and Liu, Scott and Munsch, Maximilian and {Schmidt-Lehr}, Matthias and Wycisk, Eric and Vogler, Michael P. and DeVor, Richard E. and Kapoor, Shiv G. and Logesh, K and Raja, V K Bupesh and Venkatasudhahar, M and Rana, Hitesh Kumar and Ph, Recognizing Outstanding and Coles, Claire D and Vaidyanathan, R. and Walish, J. and Lombardi, J. L. and Kasichainula, S. and Calvert, P. and Cooper, K. C. and Urbanic, R. Jill and Hedrick, Robert W. and Burford, Chris G. and Upadhyaya, G. S. and Stark, Yvonne J and Bend, North and Data, Prior Publication and Interaction, Computer and For, Method and Hema, Co and Company, Rwax and Manufacturing, Droplet-based Additive and Components, Hard Metal and The, Co and Ph, Recognizing Outstanding and Group, Development and Heaney, Donald F. and Klar, E. and Samal, P.K. and Holbrook, W Paul and Mecklenborg, Mark J and Publications, Senior Directoc and Cassells, Mary J and Manager, Product and Petrovic, John J and Marra, James C and Mecklenborg, Mark J and Politecnico, Fondazione and Covelli, Marco and Badger, Paul and Yarmeak, Gary and Sirinterlikci, Arif and Blessing, Jonathan Peter and Of, Niversity and Basf, P I M and Bureau, International and Bleyan, Davit and Formmasse, Einfache Herstellung Der and Mould, Ready T O and Stark, Yvonne J and Bend, North and Data, Prior Publication and Interaction, Computer and Uhlmann, Eckart and Bergmann, Andr{\'e} and Gridin, Witalij and Sachs, Emanuel M. and Cima, Michael and Cornie, James and Turner, Brian N. and Gold, Scott A. and Tseng, Wenjea J. and Hsu, Chung King and Travitzky, Nahum and Bonet, Alexander and Dermeik, Benjamin and Fey, Tobias and {Filbert-Demut}, Ina and Schlier, Lorenz and Schlordt, Tobias and Greil, Peter and {Thomas-Vielma}, P. and Cervera, A. and Levenfeld, B. and V{\'a}rez, A. and Thomas, Douglas S. and Gilbert, Stanley W. and Ndlovu, Siphilisiwe and Tambani, M. T. and Machio, C. and Madyira, D. M. and Uheida, E. H. and Oosthuizen, G. A. and Suryakumar, Simhambhatla and Karunakaran, K. P. and Bernard, Alain and Chandrasekhar, U. and Raghavender, N. and Sharma, Deepak and Sun, Shoujin and Brandt, Milan and Palanisamy, Suresh and Dargusch, Matthew S. and Prigatano, George P. and Su, Bo and Dhara, Santanu and Wang, Li and Strano, Matteo and Rane, Kedarnath and Herve, Guillaume and Tosi, Anna and Shi, Wang and Libeskind, Daniel and Stavropoulos, Panagiotis and Foteinopoulos, Panagis and Van Staden, Andries Coetzee and Spierings, A. B. and Starr, T. L. and Wegener, K. and Song, Yong Ak and Park, Seong Jin Sehyung S. and Choi, Doosun and Jee, Haesung and Hazarabedian, M. Sofia and Viereckl, Andreas and Quadir, Zakaria and Leadbeater, Garry and Golovanevskiy, Vladimir and Erdal, Skjalg and Georgeson, Paul and Iannuzzi, Mariano and Snelling, Dean and Williams, Christopher B. and Suchicital, Carlos and Druschitz, Alan and Chantarapanich, Nattapon and Puttawibul, Puttisak and Sitthiseripratip, Kriskrai and Sucharitpwatskul, Sedthawatt and Chantaweroad, Surapon and Pfeiffer, Friedrich and Singh, Sunpreet and Ramakrishna, Seeram and Singh, Rupinder and Pfeiffer, Friedrich and Sidambe, A T and Figueroa, I A and Hamilton, H and Todd, I and Shi, Xiaoliang and Shao, Gangqin and Duan, Xinglong and Yuan, Runzhang and Shao, Huiping and Zhao, Dechao and Lin, Tao Wei Tzer Long and He, Jianzhuang and Wu, Ji and Shahbudin, S. N.A. and Othman, Muhamad Ridhwan Bin H. and Amin, Sri Yulis Binti M. and Ibrahim, M. H.I. and Spierings, A. B. and Starr, T. L. and Wegener, K. and Scheithauer, U. and P{\"o}tschke, J. and Weingarten, S. and Schwarzer, E. and Vornberger, A. and Moritz, T. and Michaelis, A. and Sandeep, Kuriakose and Paolo, Parenti and Salvatore, Cataldo and Massimiliano, Annoni and Sames, W. J. and List, F. A. and Pannala, S. and Dehoff, R. R. and Babu, S. S. and Samanta, Sudip K. and Chattopadhyay, Himadri and Godkhindi, Madhab Malhar and Geometry, Riemannian and Analysis, Geometric and Sahoo, Priyabrata and Pratap, Tej and Patra, Karali and Dyakonov, A. A. and Sahli, M. and Gelin, J. C. and Sachs, Emanuel M. and Cima, Michael and Cornie, James and Brancazio, David and Bredt, J and Curodeau, Alain and Esterman, M. and Fan, T. and Harris, C. and Kremmin, K. and Lee, S. J. and Pruitt, B and Williams, P and Bernstein, Lawrence and Dimitrov, D. and {de Beer}, N. and Hugo, P. and Schreve, K. and Dawes, Jason and Bowerman, Robert and Trepleton, Ross and {Robert-Perron}, Etienne and Blais, Carl and Pelletier, Sylvain and Thomas, Yannig and Pelletier, Sylvain and Dionne, Martin and Kampker, Achim and Triebs, Johannes and Kawollek, Sebastian and Ayvaz, Peter and Hohenstein, Steffen and {Gonzalez-Gutierrez}, Joamin and Cano, Santiago and Schuschnigg, Stephan and Kukla, Christian and Sapkota, Janak and Holzer, Clemens and Sahli, M. and Gelin, J. C. and Barri{\`e}re, T. and Ren, Xiangyuan and Shao, Huiping and Lin, Tao Wei Tzer Long and Zheng, Hang and Rebaioli, Lara and Fassi, Irene and Rane, Kedarnath and Cataldo, Salvatore and Parenti, Paolo and Sbaglia, Luca and Mussi, Valerio and Annoni, MASSIMILIANO PIETRO GIOVANNI and Giberti, Hermes and Strano, Matteo and Nancharaiah, T. and Ranga Raju, D. and Ramachandra Raju, V. and Quinard, C. and Barri{\`e}re, T. and Gelin, J. C. and Prinz, Fritz B. and Weiss, Lee E. and Danforth, Inventors Stephen C and Mead, Belle and Agarwala, Mukesh K and Park, Highland and Kane, Shashank N. and Mishra, Ashutosh and Dutta, Anup K. and Pop, Adrian P and Ungur, Petru and Bejinaru Mihoc, Gheorghe and Plane, Fixed and Manufacturing, Additive and Version, Help and Phull, Gurpreet Singh and Kumar, Sanjeev Sanjay and Walia, R. S. and Paz, Rub{\'e}n and Santamarta, Javier and Monz{\'o}n, Mario D. and Garc{\'i}a, Joshua and Pei, Eujin and Patent, United States and Parenti, Paolo and Cataldo, Salvatore and Annoni, MASSIMILIANO PIETRO GIOVANNI and Parenti, Ing P and Cataldo, Salvatore and Parenti, Paolo and Cataldo, Salvatore and Grigis, Alberto and Covelli, Marco and Annoni, MASSIMILIANO PIETRO GIOVANNI and Kuriakose, Sandeep and Mussi, Valerio and Strano, Matteo and Annoni, MASSIMILIANO PIETRO GIOVANNI and Paper, Conference and Panel, Friedrich B Prinz and Aubin, Richard F and Beaman, Joseph J and Brown, Robert L and Fussell, Paul S and Lightman, Allan J and Weiss, Lee E. and Wozny, Michael J and Hartford, East and Sachs, Emanuel M. and Pandey, Pulak M. and Reddy, N. Venkata and Dhande, Sanjay G. and Ossai, Chinedu I. and Boswell, Brian and Davies, Ian J. and Onler, Recep and Atre, Sundar V. and Ozdoganlar, O. Burak and Korkmaz, Emrullah and Kate, Kunal and Chinn, Richard E. and Atre, Sundar V. and Ozdoganlar, O. Burak and Onagoruwa, Seyi and Bose, Susmita and Bandyopadhyay, Amit and Oliaei, S. N.B. and Karpat, Y. and Ntroduction, I and Ning, Wong Yee and Muhamad, Norhamidi and Sulong, Abu Bakar and Fayyaz, Abdolali and Raza, Muhammad Rafi and Study, Case and Ngo, Tuan D. and Kashani, Alireza and Imbalzano, Gabriele and Nguyen, Kate T.Q. and Hui, David and Ng, S. H. and Hull, J. B. and Henshall, J. L. and Newman, Stephen T. and Zhu, Zicheng and Dhokia, Vimal and Shokrani, Alborz and Kukla, Christian and {Gonzalez-Gutierrez}, Joamin and Cano, Santiago and Hampel, Stefan and Nelaturi, Saigopal and Behandish, Morad and Mirzendehdel, Amir M. and {de Kleer}, Johan and Nau, B. and Roderburg, A. and Klocke, F. and Musp, Laboratorio and Utensili, Macchine and Murr, Lawrence E. and Gaytan, Sara M. and Ramirez, Diana A. and Martinez, Edwin and Hernandez, Jennifer and Amato, Krista N. and Shindo, Patrick W. and Medina, Francisco R. and Wicker, Ryan B. and Mohanty, Saralasrita and Rameshbabu, Arun Prabhu and Mandal, Shyamal and Su, Bo and Dhara, Santanu and Mohamed, Omar A. and Masood, Syed H. and Bhowmik, Jahar L. and Mireles, Jorge and Espalin, David and Roberson, David and Zinniel, Bob and Medina, Francisco R. and Wicker, Ryan B. and Milano, Politecnico D I and Grigis, Alberto and Annoni, Lecturers M and Demir, A G and Ingegneria, Facolt{\`a} and Magistrale, Laurea and Di, Modelli and In, Switching and Resistive, Memorie and Della, Ruolo and Merz, R. and {Ramaswami} and Terk, K and Weiss, M and {Dipl-Ing techn DDr hc Fritz Paschke Dipl-Ing DDr Helmut Detter}, O O and Merklein, Marion and Junker, Daniel and Schaub, Adam and Neubauer, Franziska and Meng, Fei and Zhang, Haiou and Wang, Guilan and Md Ani, Sarizal and Muchtar, Andanastuti and Muhamad, Norhamidi and Ghani, Jaharah A. and Godec, Damir and Cano, Santiago and Holzer, Clemens and {Gonzalez-Gutierrez}, Joamin and Masood, Syed H. and Song, W. Q. and Mason, Michael S. and Huang, Tieshu and Landers, Robert G. and Leu, Ming C. and Hilmas, Gregory E. and Scarlet, Douglas and Martina, F. and Mehnen, J. and Williams, S. W. and Colegrove, P. and Wang, Fude and Marcus, L and St, Joseph J and Barlow, W and David, L B and Crawford, H and Parenti, Paolo and Cataldo, Salvatore and Annoni, MASSIMILIANO PIETRO GIOVANNI and Mahmoodan, M. and Aliakbarzadeh, H. and Gholamipour, R. and Magnusson, Nate and Schmidt, Sandvik Hard Materials and Magnoni, Paolo and Rebaioli, Lara and Fassi, Irene and Pedrocchi, Nicola and Tosatti, Lorenzo Molinari and M Nafis, O. Z. and Nafrizuan, M. Y. and Munira, M. A. and Kartina, J. and Amin, Sri Yulis Binti M. and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Fayyaza, Abdolali and Yunn, Heng Shye and Lutton Cwalina, K. and Demarest, C. R. and Gerard, A. Y. and Scully, J. R. and Luong, Dung and Lehmhus, Dirk and Gupta, Nikhil and Weise, Joerg and Bayoumi, Mohamed and Lotterio, Marco and Liu, Jinhui Jiancheng and Camfield, Robert and Liu, Z E and Ko, T C and Best, J and Cawley, J D and Heuer, a H and Lin, Tao Wei Tzer Long and Hourng, Lih Wu and Lin, Dongguo and Xu, Jifu Jipeng and Shan, Zhongde and Chung, Sung Taek Shan Chen and Park, Seong Jin Sehyung S. and Li, Lin and Haghighi, Azadeh and Yang, Yiran and Li, Yimin Yan and Guo, Zhimeng and Li, Jian Zhong and Wu, Tao and Yu, Zu Yuan and Zhang, Long and Chen, Guo Qing Gang and Guo, Dong Ming and Li, Tao and Li, Quan Qingfa and Fuh, J. Y.H. and Yu, Poh Ching and Lu, L. and Lembo, John and Lee, Wei Chen and Wei, Ching Chih and Chung, Sung Taek Shan Chen and Lee, Jian Yuan and An, Jia and Chua, Chee Kai and Cortina, Magdalena and Arrizubieta, Jon I{\~n}aki and Ruiz, Jose Exequiel and Ukar, Eneko and Lamikiz, Aitzol and Lantada, Andr{\'e}s D{\'i}az and Piotter, Volker and Plewa, Klaus and Bari{\'e}, Nicole and Guttmann, Markus and Wissmann, Markus and Kurgan, Naci and Greul, Matthias and Ku, Matthias and Kumbhar, N. N. and Mulay, A. V. and Kumar, Sanjeev Sanjay and Czekanski, Aleksander and Kukla, Christian and Duretek, Ivica and {Gonzalez-Gutierrez}, Joamin and Holzer, Clemens and Kruth, Jean Pierre and Leu, Ming C. and Nakagawa, T. and Kong, Xiangji and Koh, Young Hag and Halloran, John W. and Klocke, F. and Wirtz, H and Meiners, W and Kizaki, Toru and Sugita, Naohiko and Mitsuishi, Mamoru and Kishore, Vidya and Ajinjeru, Christine and Nycz, Andrzej and Post, Brian and Lindahl, John and Kunc, Vlastimil and Duty, Chad and Kim, Chang Ju Chung Soo and Bono, Matthew and Ni, Jun and Kim, Jongwon and Cho, K. S. and Hwang, J. C. and Iurascu, C. C. and Park, F. C. and Kietzman, J W and Cooper, A G and Weiss, Lee E. and Schultz, L. and Lombardi, J. L. and Prinz, Fritz B. and Kerbrat, Olivier and Mognol, Pascal and Hasco{\"e}t, Jean Yves and Hascoet, J. Y. and Kelley, Andrew and Kataria, Ravinder and Kumar, Jatinder and Kasperovich, Galina and Hausmann, Joachim and Karunakaran, K. P. and Suryakumar, Simhambhatla and Pushpa, Vishal and Akula, Sreenathbabu and Kara{\v c}i{\'c}, Sabina and Wil{\'e}n, Britt Marie and Suarez, Carolina and Hagelia, Per and Persson, Frank and Cossio, Mar{\'i}a Laura T and Giesen, Laura F and Jones, Jason B. and Part, R C and Kuriakose, Sandeep and Parenti, Paolo and Cataldo, Salvatore and Annoni, MASSIMILIANO PIETRO GIOVANNI and Jiang, Aimin and Wen, Bo and Li, Quan Qingfa and Ji, C. H. and Loh, N. H. and Khor, K. A. and Tor, S. B. and Jain, Pranjal and Kuthe, A. M. and Jones, Jason B. and Jackson, M J and Robinson, G M and Whitfield, M D and Centre, Birck Nanotechnology and Lafayette, West and Lafayette, West and Islam, M. and {Martinez-Duarte}, R. and Dun, Yichao and Zhu, Lida and Wang, Shuhao Shijie and Virtanen, Juho Pekka and Hyypp{\"a}, Hannu and Kurkela, Matti and Vaaja, Matti and Alho, Petteri and Hyypp{\"a}, Juha and Hur, Junghoon and Lee, Kunwoo and {Zhu-Hu} and Kim, Jongwon and Huang, Ming Shyan and Hsu, Hung Chuan and Horvath, Daniel and Noorani, Rafiq and Mendelson, Mel and Herali{\'c}, Almir and Christiansson, Anna Karin and Lennartson, Bengt and Heng, Shye Yunn and Raza, Muhammad Rafi and Muhamad, Norhamidi and Sulong, Abu Bakar and Fayyaz, Abdolali and M. Amin, Sriyulis and Heigel, Jarred C. and Hebbalkar, Sunil and He, Rujie and Zhang, Rubing and Zhu, Xiaolei and Wei, Kai and Qu, Zhaoliang and Pei, Yongmao and Fang, Daining and Hartmann, K. and Krishnan, R. and Merz, R. and Neplotnik, G. and Prinz, Fritz B. and Schultz, L. and Terk, M. and Weiss, Lee E. and Guo, Nannan and Leu, Ming C. and Guo, Peng and Zou, Bin and Huang, Chuanzhen and Gao, Huabing and Gu, Lining and Huang, Jiwu and Xie, Chenhui and Grida, Imen and Evans, Julian R.G. and Grgura{\v s}, Damir and Kramar, Davorin and Greulich, Michael and Govindarajan, Sivakumar and {Gonzlez-Gutirrez}, Joamn and Beulke, Gustavo and Emri, Igor and {Gonzalez-Gutierrez}, Joamin and Godec, Damir and Kukla, Christian and Schlauf, Thomas and Burkhardt, C. and Holzer, Clemens and Gibson, Michael A. and Mykulowycz, Nicholas M. and Shim, Joseph and Fontana, Richard and Schmitt, Peter and Roberts, Andrew and Ketkaew, Jittisa and Shao, Ling and Chen, Wen and Bordeenithikasem, Punnathat and Myerberg, Jonah S. and Fulop, Ricardo and Verminski, Matthew D. and Sachs, Emanuel M. and Chiang, Yet Ming and Schuh, Christopher A. and John Hart, A. and Schroers, Jan and Giberti, Hermes and Strano, Matteo and Annoni, MASSIMILIANO PIETRO GIOVANNI and Ghazanfari, Amir and Li, Wenbin and Leu, Ming C. and Hilmas, Gregory E. and Geiger, Martin and Steger, Wilhelm and Greul, Matthias and Sindel, Manfred and Fullenwider, Blake and Kiani, Parnian and Schoenung, Julie M. and Ma, Kaka and Freitas, Dino and Almeida, Henrique A. and B{\'a}rtolo, Helena and B{\'a}rtolo, Paulo J. and Frazier, William E. and Rohstoffe, Fachagentur Nachwachsende and Frank, Matthew C. and Wysk, Richard A. and Joshi, Sanjay B. and Flynn, Joseph M. and Shokrani, Alborz and Newman, Stephen T. and Dhokia, Vimal and Ferreira, T. J. and Vieira, M. T. and Fernandes, C. M. and Senos, A. M.R. and Fayyaz, Abdolali and Muhamad, Norhamidi and Sulong, Abu Bakar and Yunn, Heng Shye and Amin, Sri Yulis Binti M. and Rajabi, Javad and Wong, Yee Ning and Esaklul, Khlefa A. and Ahmed, Tawfik M. and Enneti, Ravi K. and Prough, Kevin C. and Wolfe, Thomas A. and Klein, Andrew and Studley, Nick and Trasorras, Juan L. and Engstr{\"o}m, Sebastian and {El-Wardany}, T. and Barth, R. and Holowczak, J. and Tredway, W. and Chen, L. J. and Zhang, Shuai and Zhang, Yazhou and Gao, Ming and Wang, Fude and Li, Quan Qingfa and Zeng, Xiaoyan and Edition, Third and Du, Wei and Bai, Qiang and Zhang, Bi and Wang, Jun and Chen, Ting-wei and Jin, Yu-an and He, Yong and Material, Introduction and Dornfeld, D. and Min, S. and Takeuchi, Y. and Di Angelo, L. and Di Stefano, P. and Marzola, A. and Dhara, Santanu and Su, Bo and Desfontaines, M. and Jorand, Y. and Gonon, Maurice and Fantozzi, G. and Delano{\"e}, Aur{\'e}lie and Lay, Sabine and DebRoy, T. and Wei, H. L. and Zuback, J. S. and Mukherjee, T. and Elmer, J. W. and Milewski, J. O. and Beese, A. M. and {Wilson-Heid}, A. and De, A. and Zhang, W. and De Oliveira, Fernando Brand{\~a}o and Rodrigues, Alessandro Roger and Coelho, Reginaldo Teixeira and De Souza, Adriano Fagali and De Lima, Milton Sergio Fernandes and Sankar{\'e}, Simon and Danforth, Inventors Stephen C and Mead, Belle and Agarwala, Mukesh K and Park, Highland and Dadhich, Prabhash and Srivas, Pavan Kumar and Mohanty, Saralasrita and Dhara, Santanu and C{\^a}mara, M. A. and Rubio, J. C.Campos and Abr{\~a}o, A. M. and Davim, J. P. and Cuellar, Juan Sebastian and Smit, Gerwin and Plettenburg, Dick and Zadpoor, Amir and Criales, Luis E. and Ar{\i}soy, Yi{\u g}it M. and Lane, Brandon and Moylan, Shawn and Donmez, Alkan and {\"O}zel, Tu{\u g}rul and Cortina, Magdalena and Arrizubieta, Jon I{\~n}aki and Ruiz, Jose Exequiel and Ukar, Eneko and Lamikiz, Aitzol and Cordero, Zachary C. and Siddel, Derek H. and Peter, William H. and Elliott, Amelia M. and Ph, Recognizing Outstanding and Chuankrerkkul, Nutthita and Messer, Peter F and Davies, Hywel A and Chu, Won Shik and Kim, Chang Ju Chung Soo and Lee, Hyun Taek and Choi, Jung Oh and Park, Jae Il and Song, Ji Hyeon and Jang, Ki Hwan and Ahn, Sung Hoon and Chong, Li and Ramakrishna, Seeram and Singh, Sunpreet and Chen, Guo Qing Gang and Cao, Peng and Wen, Guian and Edmonds, Neil and Li, Yimin Yan and Chu, Won Shik and Kim, Sung Geun and Jung, Woo Kyun and Kim, Hyung Jung Kyu and Ahn, Sung Hoon and Gal, Chang Woo and Song, Gi Woung and Baek, Woon Hyung and Kim, Hyung Jung Kyu and Lee, Dae Keun and Lim, Ki Wook and Park, Seong Jin Sehyung S. and Chae, J. and Park, Seong Jin Sehyung S. and Freiheit, T. and Chabert, France and Dunstan, David E. and Franks, George V. and Cesarano, Joseph and Ce, Nataly and Paul, Shiladitya and Cano, Santiago and {Gonzalez-Gutierrez}, Joamin and Sapkota, Janak and Spoerk, Martin and Arbeiter, Florian and Schuschnigg, Stephan and Holzer, Clemens and Kukla, Christian and Bukvic, Gill and Sanchez, Luiz Eduardo De Angelo and Fortulan, Carlos Alberto and Fiocchi, A. A. and Marinescu, Ioan Demitrius and Fabrication, Solid Freeform and Advanced, An and Approach, Manufacturing and Bose, Animesh and Schuh, Christopher A. and Tobia, Jay C. and Tuncer, Nihan and Mykulowycz, Nicholas M. and Preston, Aaron and Barbati, Alexander C. and Kernan, Brian and Gibson, Michael A. and Krause, Dana and Brzezinski, Tomek and Schroers, Jan and Fulop, Ricardo and Myerberg, Jonah S. and Sowerbutts, Mark and Chiang, Yet Ming and John Hart, A. and Sachs, Emanuel M. and Lomeli, Ester E. and Lund, Alan C. and Boschetto, Alberto and Bottini, Luana and Veniali, Francesco and Bordin, A. and Sartori, S. and Bruschi, S. and Ghiotti, A. and Bariani, P. F. and Boparai, Kamaljit Singh and Singh, Rupinder and Singh, Harwinder and Bissacco, G. and Hansen, H. N. and Slunsky, J. and De Chiffre, L. and Bikas, H. and Stavropoulos, Panagiotis and Chryssolouris, G. and B{\'a}rtolo, Paulo J. and Bhorkade, Ashish and Bharambe, Chetan and Bhangale, Suraj and Patil, Pankaj and Scholar, B E and Nashik, Bvcoe\&ri and Bern{\aa}s, Mia and Westermann, Ida and Johnsen, Roy and Torres, Cristian and Jernberg, Anders and Qvale, Atle H. and Iannuzzi, Mariano and Bellini, Anna and Shor, Lauren and Guceri, Selcuk I. and G{\"u}{\c c}eri, Sel{\c c}uk and Baumann, Felix W. and Eichhoff, Julian R. and Roller, Dieter and Bakan, H. I. and Celis, J. P. and G{\"u}rbilek, Nurdan and Bai, Qiang and Bai, Yong and Attia, Usama M. and Alcock, Jeffrey R. and Aramcharoen, A. and Mativenga, P. T. and Anzalone, Gerald C. and Zhang, Chenlong and Wijnen, Bas and Sanders, Paul G. and Pearce, Joshua M. and Antony, Leo V.M. and Reddy, Ramana G. and Demir, A G and Anitha, R. and Arunachalam, S. and Radhakrishnan, P. and Ang, Ker Chin and Leong, Kah Fai and Chua, Chee Kai and Chandrasekaran, Margam and Praniewicz, Maxwell and Kurfess, Thomas and Saldana, Christopher and Amanullah, A. N.M. and {Murshiduzzaman} and Saleh, Tanveer and Khan, Raisuddin and Almeida, F. A. and Carrapichano, J. M. and Fernandes, A. J.S. and Sacramento, J. and Silva, R. F. and Oliveira, F. J. and Allibert, C. H. and Agarwala, Mukesh K and Van Weeren, R and Vaidyanathan, R. and Bandyopadhyay, Amit and Carrasquillo, G and Jamalabad, V and Langrana, N. A. and Safari, A and Garofalini, S H and Danforth, S. C and Burlew, J and Donaldson, R and Whalen, P and Ballard, C and Weeren, R Van and Bandyopadhyay, Amit and Safari, A and Danforth, S. C and Priedeman, W R and Prinz, Fritz B. and {Lara-subiabre}, Brenda Ang{\'e}lica and Chac{\'o}n, Maria and Chac{\'o}n, Azael and D{\'i}az Larenas, Claudio and Bast{\'i}as D{\'i}az, Cecilia and Reflexiva, Investigaci{\'o}n Identidad and Pr{\'a}ctica, D E S U and Sa{\~n}udo, Lya and Escobar, Nancy and Helena, Sonia and Galindo, Castellanos and Esperanza, Ruby and Escobar, Yaya and Ferra, P{\'e}rez and L{\'o}pez Calva, Mart{\'i}n and Baz, Domingo and Gonz, Loreto and {Gonz\'alez Calvo Gustavo} and Esteve, Olga and {de Lella}, C. and {AUFOP} and Hirmas Ready, Carolina and PEREZ GOMEZ, ANGEL I and Mart{\'i}nez, Lurdes and Mart{\'i}n, Montserrat and Capllonch, Marta and Pr, D E L and En, Cticum and Adquisici, L A and Profesionales, D E Competencias and Permiten, Q U E and Transferencia, L A and Propios, Mbitos and Acci, D E L A and Rica, Universidad De Costa and Rica, Costa and Marmo, C{\'e}lica E C{\'a}novas and Rivas, Teresita and Mart{\'i}n, Celina and Venegas, Mar{\'i}a Alejandra and Pontes Pedrajas, Alfonso and Serrano Rodr{\'i}guez, Roc{\'i}o and Poyato Lopez, Francisco Jos{\'e} and Linea, Seminario D E and Las, Ense{\~n}anza D E and La, Ciencias Y and Vain, Pablo Daniel and Arbes{\'u} Garc{\'i}a, Mar{\'i}a Isabel and Guti{\'e}rrez Mart{\'i}nez, Elia and Pastells, {\`A}ngel and Gvirtz, Silvina and Palamidessi, Mariano and La, Desarrollo E D E and Como, Ocencia and Contreras, Eflexiva Gloria and Arbes, Isabel and Carrasco, Pablo Castro and Carvajal, Carlos Ag{\"u}ero and Alfaro, Andrea Barraza and Puentes, Gonzalo Escobar and Varas, Jaime Jorquera and Barrea, Susana and Guzm{\'a}n, Isabel and Mar{\'i}n, Rigoberto and Zesati, Gina and Breach, Rosa and Mellado Hern{\'a}ndez, M E and Barba, Jos{\'e} J. and G{\'o}nzalez Calvo, Gustavo and {Barba-Mart{\'i}n}, Ra{\'u}l A. and Sanmamed, M.G. and Abeledo, E.J.F. and Tagle, Tania and Gomes Lima, Paulo and Rodrigues, Renata and {Rodr{\'i}guez-Illera}, Jos{\'e} Luis and نوروزی, محمود and Cient{\'i}fica, Sistema De Informaci{\'o}n and La, Desarrollo E D E and Reflexiva, Investigaci{\'o}n Identidad and Profesorado, D E L and Las, Desde and Grupal, Perspectivas and Cano, Elena and Imbernon, Francisco and Moral Santaella, Cristina and Pe{\~n}a, Vel{\'a}zquez and Estrella, A and Reyes, Ulloa and Luis, G and Mujica, Hern{\'a}ndez and Jorge, L and Pe{\~n}a, C Estrella A Vel{\'a}zquez and Reyes, C Luis G Ulloa and Auxiliar, Profesor and Pavi{\'e}, Alex and Imbern{\'o}n, Francesc and {Esteve Olga} and Flores, Pablo and Inexplorados, Explorados E and Cisternas, Tatiana and Lima, Paulo Gomes and Educativos, Centro De Estudios and Federal, Distrito and La, E N and Inicial, Formaci{\'o}n and Profesorado, D E L and Mu{\~n}oz Mart{\'i}nez, Maryluz and Garay Garay, Fredy and C{\'a}ceres, M. and Lara, L. and Iglesias, C.M. and Garcia, R. and Bravo, G. and Ca{\~n}edo, C. and Valdes, O. and Francisco, Juan and Canals, D{\'i}az and Cabero Almenara, J. and Barroso Osuna, J. and El, E N and Ense{\~n}ar, Oficio D E and Perrenoud, Philippe and Geometry, Riemannian and Analysis, Geometric and Russell, Tom and {V{\'e}laz de Medrano}, Consuelo and Vaillan, Denise and Perrenoud, Philippe and Desarrollo, E L and Del, Profesional and La, Pr{\'a}ctica and La, Hip{\'o}tesis D E and {ABS} and Fayyaz, Abdolali and Muhamad, Norhamidi and Sulong, Abu Bakar and Song, Yong Ak and Park, Seong Jin Sehyung S. and Chae, Soo Won and Di, Olitecnico and Of, Chool and In, C and Milano, Politecnico D I and {A.Cazzani} and Resources, Back T O and Ph, Recognizing Outstanding and Singh, Prabhjot and Moon, Yong-mo and Dutta, Debasish and Kota, Sridhar and Jeyachandran, Praveen and Patil, Balu and Doddamani, Mrityunjay and Bontha, Srikanth and Balla, Vamsi Krishna and Greulich, Michael and Greul, Matthias and Pintat, Theo and Bourell, David L. and Karunakaran, K. P. and Suryakumar, Simhambhatla and Pushpa, Vishal and Akula, Sreenathbabu and Annoni, MASSIMILIANO PIETRO GIOVANNI and Giberti, Hermes and Strano, Matteo and Williams, Christopher B. and Hedrick, Robert W. and Urbanic, R. Jill and Burford, Chris G. and Kubalak, Joseph R. and Wicks, Alfred L. and Williams, Christopher B. and Bonaiti, Giuseppe and Parenti, Paolo and Annoni, MASSIMILIANO PIETRO GIOVANNI and Kapoor, Shiv G. and Thompson, Yvonne and {Gonzalez-Gutierrez}, Joamin and Kukla, Christian and Felfer, Peter and Braconnier, Daniel J. and Jensen, Robert E. and Peterson, Amy M. and Oyelola, Olusola and Crawforth, Peter and M'Saoubi, Rachid and Clare, Adam T. and Kulkarni, Harshal and Dabhade, Vikram V. and Jabbari, Amin and Abrinia, Karen and Strano, Matteo and Rane, Kedarnath and Briatico Vangosa, Francesco and Di Landro, Luca and Thompson, David C. and Crawford, Richard H. and Aleni, Afshin Hasani and Ituarte, I{\~n}igo Flores and Mohite, Ashish and {St-Pierre}, Luc and Partanen, Jouni and Guan, Kai and Wang, Zhigang Zemin and Gao, Ming and Li, Xiangyou and Zeng, Xiaoyan and Liu, Bin and Wang, Yuxiang and Lin, Ziwei and Zhang, Tao and {Gonzalez-Gutierrez}, Joamin and Arbeiter, Florian and Schlauf, Thomas and Kukla, Christian and Holzer, Clemens and Carneiro, Luiz and Jalalahmadi, Behrooz and Ashtekar, Ankur and Jiang, Yanyao and Romero, Ana and Herranz, Gemma and Ferraris, Eleonora and Vleugels, Jef and Guo, Yuebin and Bourell, David L. and Kruth, Jean Pierre and Lauwers, Bert and Bakkelund, Jim and Karlsen, Roald and Bj{\o}rke, {\O}yvind and Greul, Matthias and Pintat, Theo and Greulich, Michael and Suryakumar, Simhambhatla and Karunakaran, K. P. and Chandrasekhar, U. and Somashekara, M. A. and Milano, Politecnico D I and Singh, Prabhjot and Dutta, Debasish}, - year = {2018}, - journal = {Journal of Materials Processing Technology}, - volume = {1}, - eprint = {1011.1669v3}, - issn = {09240136}, - abstract = {Solid Freeform Fabrication and Shape Deposition are rapid manufacturing processes which build parts by incremental material deposition and fusion of cross-sectional layers. In this paper, several thermal deposition processes are described for directly fabricating prototype metal shapes using robotically manipulated material deposition systems. A robotic palletizing/part transfer system is also described which integrates multiple deposition and shaping processes into a single facility for rapidly manufacturing functional shapes.}, - archiveprefix = {arxiv}, - isbn = {978-3-642-25387-4}, - pmid = {25246403}, - keywords = {\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_,-c,-n,07,10,12,16,1631,16S rRNA gene sequences,17\textendash 4 PH stainless steel,18Ni Maraging Steel,20,3-D printers,3-D printing,304 stainless steel,316L stainless steel,3D gel-printing,3D modeling,3d printing,3D printing,3D Printing,3D printing rheology,3D scanning,3D-printing,50,80,81,83,85,87,a,A. Injection molding,A. Intermetallics,A. Sintering,a1700236,Abnormal grain growth,ABS,abstract,Accessibility analysis,Accuracy,actividad cognoscitiva productiva,activity as fundamental in,actual sociedad y su,Adaptation to European higher education area (EHEA,Additive,Additive fabrication,Additive layer manufacturing,Additive manufacture,additive manufacturing,Additive manufacturing,Additive Manufacturing,additive manufacturing (AM),Additive manufacturing (AM),Additive Manufacturing (AM),Additive manufacturing processes,Additive manufacturing review,Additive manufacturing technologies,Additive/Subtractive Hybrid Manufacturing,adhesion,Adolescence,Adolescencia,Adolescent,Adolescent Behavior,Adolescent Behavior: psychology,Adult,Advanced manufacturing,Advanced manufacturing technologies,Aerospace,aesthetics,afm,Agresiones al cuerpo,aisi 316l feedstock,AISI 316L stainless steel,AISI316,al,Al2O3,AlN,Alumina,Alumina (Al2O3),Alumina-zirconia,aluminium,Aluminum nitride,AM applications,AM materials,AM processes,an additive process,and manufacturing,and on cor-,and unknown territories,Animal tests,applications,Applied sciences,aprendizaje,aprendizaje reflexivo,Arc welding,Artificial seawater,as a key part,as none were found,Assistive,atomic force microscope,Atomic force microscope (AFM),Attachment to the body,Attaque au corps,auto,AUTOCAST-X,autoinjury and health,Autolesiones deliberadas,Automutilation d\'elib\'er\'ee,b,B. Microstructure,B. Shape-memory effects,backbone binders,Backbone polymer,ball milling,Ball milling,Bead-based deposition processes,Benchmarking,Binder,binder system,Binder system,Binders,biocorrosion,Biomaterials,Biomedical,Biomedical titanium alloys,Biopolymer printing,body,Body image,Body Piercing,Body Piercing: psychology,Body Piercing: statistics \& numerical data,Bolts,Bone remodeling,Build orientation,Buildings,Burr formation,C. Diffusion,C. Powder metallurgy,C. Sintering,cad,calorimetry,CAM,Capability profiles,Capillary pressure,CAPP,Carbides,carbon content,Carbon content,Carbon control,Case studies,castings,Cathodic protection,Cellular materials,Cemented carbide,cemented carbides,Cemented carbides,Cemented carbides WC-Co,Cemented tungsten carbide,Cemented tungsten carbide (WC-Co),centrada en la,Central composite design,ceramic,Ceramic,Ceramic green body,Ceramic green machining,ceramic injection molding (CIM),ceramic powders,Ceramic prototypes,Ceramic slurry,ceramics,Ceramics,Cermets,Characterization,chemical vapor deposition diamond coating tool,Chi phase,Chile,Chile: epidemiology,Chip formation,Chip volume,Chromium nitrides,Cladding,claves para escribir el diario del profesorado,Clay prototype,clc number,closite-30b,cm,Cnc,CNC,CNC machining,CNC Machining,cold isostatic pressing,Cold spraying,Collaborative work,Compensation,competencias,competencias docentes,Complex shape,complications did not,complications from inserting a,component in initial teacher,comportamiento de grupo,Composite material,Composite matrix,Composite powders,Composites,compromiso,computer aided design,Computer Numerical Control machining,Computer-aided design,Computer-Aided Manufacturing,concepciones y motivaciones,conceptions and motivations about,Concrete,Concrete deterioration,configuration and reconfiguration,Configuration space,Conformal cooling,constituci\'on del yo,Constitution,contact angle,contenido,contradicci\'on,control postural- estabilizaci\'on- v\'ias,corporal modifications,corps,corrosion,Corrosion,Corrosive environment,Cosmetic Techniques,CRIMEAN HEMORRHAGIC FEVER,cr\'itica,Critical pitting temperature,Critical solid loading,Cryogenic compressed air,Cryogenic machining,Cu,cuerpo,CUERPO,culturas juveniles,cultures juv\'eniles,curing,Cutting,Cutting force,Cutting parameters,Cutting tool,Cyanoacrylate,Cyclic deformation,Cyclic potentiodynamic polarization,D-Optimal design,de uni\'on teor\'ia y,deal of understanding of,debinding,Debinding,defects,del docente - pedagog\'ia,Deliberate self-harm,demands a great,Densification,density gradient,Density gradients,Dental crown,Deposition feature segment,Deposition process monitoring,desarrollo,desarrollo profesional,design,Design,Design for manufacturing,Design method,Design of experiments,Design of Experiments,Design of experiments - DOE,Design S\textendash N curves,Designed mesostructure,Diamond impregnated tool,Diario del profesorado,diarios de pr\'acticas,Digital hybrid AM,Digital manufacturing,Dimension precision,Dimensional veriation,Direct Laser Deposition (DLD),Direct metal deposition,Direct metal fabrication,Direct metal laser sintering,Direct rapid tooling,Directed energy deposition,Directed Energy Deposition,Dispersant,distortion,Distortion,Distributed manufacturing,DOAJ:Materials,DOAJ:Technology and Engineering,Docencia,doi,Done-in-One,Drilling,Duplex stainless steels,dx,e-portafolio,Eco-design,economic aspect,EDM,EDS analysis,educaci\'on,Educaci\'on,educaci\'on superior,education in chile,Educational evaluation,Effect of C and Co content,ek,el profesor estrat\'egico,Electrical engineering. Electronics. Nuclear engin,Electrodeposition,Electron beam melting,Empirical modeling and optimization,en el terreno de,enfoque por,enfoque reflexivo,Enfoques de aprendizaje,Engineering,ense\~nanza,ense\~nanza reflexiva,Ense\dbend anza primaria,Environmental impact,Environmental reduction factors,Epidemiologic Methods,EPIDEMIOLOGICAL SITUATION,epidural,EPIZOOTIOLOGICAL MONITORING,es,est\'etica,esth\'etique,estrategia de,Estudiante para profesor,estudiante-profesor,Estudiantes excelentes,Estudiantes medios.,estudiantes practicantes,Estudiantes universitarios,Estudio evolutivo,etnograf\'ia,ev,Evaluaci\'on,evaluaci\'on del desempe\~no docente,existe una abundante literatura,experiencia profesional,Experimental design,Extruder design,extrusion,Extrusion,extrusion freeforming,Extrusion freeforming,Extrusion Freeforming,extrusion-based additive manufacturing,Fabricated metal,Failure pressure,Fasteners,Fasteners failures,Fatigue,Fatigue assessment methods,Fatigue life estimation,Fatigue life predictions,Fatigue stress failure,FDM,FDMet,Feed mark,Feed stock filament,feedstock,Feedstock,Feedstock extrusion,feedstock filament,Feedstocks,Female,FFF,Fibre-metal laminates (FML),filaments,filosof\'ia.,find any reports of,Finishing,Finite element analysis,Finite element method (FEM),Five-axis machining,Flank wear,flexible processes is key,Flexure strength,fml,Forced vibration,formaci\'on,formaci\'on de docentes,formaci\'on de profesores,formaci\'on de profesores reflexivos,formaci\'on del profesorado,formaci\'on docente,formaci\'on docente inicial,formaci\'on inicial,formaci\'on inicial del profesorado,formaci\'on inicial docente,Formaci\dbend n de profesores,Forming characteristics,Fractals,Free-form surface machining,Fretting,Fretting wear,ftir,Functionally graded composites,fused deposition,Fused deposition,Fused Deposition,fused deposition modeling,Fused deposition modeling,Fused Deposition Modeling,Fused deposition modeling (FDM),Fused Deposition Modeling (FDM),Fused deposition modelling,fused filament fabrication,Fused filament fabrication,futuros profesores de ciencias,Gas metal arc welding,Gas metal arc welding (GMAW),Gelation,Gelcasting,Geometrical analysis,geometry,Grain growth,Grain growth inhibitor,Grain shape,Green ceramics,Green compact,Green machinability,green machining,Green machining,Green micromachining,Green parts,Green strength,Green-state machining,Green-state milling,growth is that it,Grupo B,Grupo C,Hard metal,Hardmetal,Hardness,Heat treatment,high resolution images,High speed steel,High strain rate,high temperature,High-power direct laser deposition,Highly filled filaments,Highly-filled polymers,historias de,Homogeneity,Hot cutter machining,Hot embossing,hot risers,http,Humans,Hybrid,Hybrid additive manufacturing,Hybrid additive-subtractive manufacturing,Hybrid machine,Hybrid machines,hybrid manufacturing,Hybrid manufacturing,Hybrid manufacturing process,Hybrid manufacturing processes,Hybrid Multi-tasking,hybrid processes,Hybrid processes,Hybrid rapid prototyping,Hybrid technologies,Hydraulic fluids,Hydrogen embrittlement,Hydrogen induced stress cracking,icle,if neuraxial anes-,Image corporelle,Image scan,Imagen corporal,In situ measurements,in this,incidencia en la educaci\'on,Inconel,increased flexibility in manufacturing,Industrial robotics,Infiltration,Influencing regularities,Information technology,Infrared preheating,ing with neuraxial anesthesia,inhibitor,initial teacher training of,injection molding,Injection molding,injection moulding,Injection moulding,Injection Moulding,ink-jet printing,instrument for,Interlayer strength,introducci\'on,investigaci\'on,investigaci\'on educativa,investigaci\'on-acci\'on,Investigaci\dbend n educativa,investment casting,IR sensors,iron-oxidising bacteria,is an efficient production,is the fastest growing,Iterative learning control,j,jeunesse,Joining,juvenile cultures,juventud,JUVENTUD,jzus,Key performance indicators,Kinematics,knowledge - teaching practice,known,la adquisici\'on de competencias,la educaci\'on,la formaci\'on,la reflexi\'on como nexo,laminated,Large scale,las caracter\'isticas de la,laser,Laser ablation,Laser additive manufacturing,Laser Cladding,Laser deposition,Laser Engineered Net Shaping,Laser Engineered Net Shaping (LENS),Laser metal deposition,Laser Metal Deposition,Laser Metal Deposition Shaping (LMDs),Laser metal depostion,Laser scanner,Laser sintering,Laser surface finishing,Lasers,Latticework,Layered deposition,Layered manufacturing,Layered manufacturing hybrid processes,ldh,LDH (Mg\textendash Al),learning community,local,Local porosity distribution,Low alloy forged steels,Low Young's modulus,Lubricant,machinability,Machinability,Machine development,Machine frames,Machine tool,Machine tool design,Machine tools,Machine Tools,Machining,Machining feature segment,Male,Manufacturability analysis,Manufacturing,Manufacturing systems design,Manufacturing technology,Mass production,Material deposition,Material extrusion,Material extrusion additive manufacturing,Material properties,Material texture,materials,Materials additive manufacturing,Materials design,Materials informatics,Materials of engineering and construction. Mechani,mathematics education,Mean stress effect,Mean stress factor,mecanismos de anteroalimentaci\'on y,Mechanical behaviour of materials,Mechanical properties,Mechanical Properties,Mechanical properties of materials,mechanical property,Mechanical property,Mechanical strength,Mechanism design,mellado hern\'andez,Melt extrusion manufacturing,Melt pool,MEMS,mentor\'ia,mentoring process in detail,mentoring processes in initial,Meso machining,meta-an\'alisis,Metal,Metal additive manufacturing,Metal alloys,Metal AM,Metal foams,Metal injection molding,Metal matrix composite,Metal matrix composites,Metal part,Metal powder injection molding,Metal processing,Metal wire,Metallic binders,Metallic prototypes,Metallurgy,metals and alloys,Metals and alloys,Metals and ceramics,method,m\'etodo pedag\'ogico,mg,Micro hardness,Micro milling,Micro Milling,micro PIM,Micro powder injection molding ({$\mu$}PIM),Micro powder injection molding ({$\mu$}PIM) critical sol,Micro powder injection moulding,Micro scale,Micro-chatter,Micro-fluidic systems,Micro-machining,Micro-Metal Injection Molding,Micro-milling,Micro-powder injection molding ({$\mu$}PIM),micro-powder injection moulding,Micro-powder injection moulding,microbial community structure,microfabrication,Microinjection molding,Micromachining,micromilling,Micromilling,Microstructural architecture,Microstructure,Microstructure and properties,Microstructure design,Microstructures,MIG welding,milling,Milling,Milling force,milling machining,mim,MIM,Miniaturization,Minimum uncut chip thickness,miscellaneous,Mixture physical properties,MMC,Modeling processes,Modelling,Modelling methods,modificacio -,MODIFICACIONES CORPORALES,Molds,Molybdenum,monitoring and control,Monomer,MORBIDITY RATES,Motivation,Movement,Multi-axis additive manufacturing,Multi-material inje,Multiaxial stress criteria,Multidirection slicing,MWCNT,na forma\c{c}\~ao,Nano scale,nanoclay,Nanoclay (Closite-30B),Nanocrystalline,Nanocrystalline diamond,Nanocrystalline metals,Nanocrystalline powder,Nanotechnology,Near net shape forming,needle through a,nes corporales,Network of knowledge,New trends in machining,Nickel alloy,Nickel tungsten carbide,nitrogen converting microorganisms,niveles,Non-assembly mechanisms,Nonallergenic elements,Nonplanar slices,Nontoxic elements,Notch support factor,Notched specimens,o portf\'olio digital como,objetos de estudio,Octree,odstra\v{n}ov\'an\'i pojiva,of the practicum,Oil and gas,Open-source,Open-source electronics,Open-source hardware,Optimization,Optimization techniques,optimization under uncertainty,org,Orientation field,oxygen content,pacs,Parallel kinematics,Parallel mechanism,Parametric study,Part distortion,Part quality,Passivation,pdf,pedagog\'ia,PEG/PMMA composite binder,Pellet extrusion,perforaci\'on corporal,Performance evaluation,Personal fabrication,Phase constitution,Phase diagrams,Physical properties,piel,Pipeline integrity,PLA material,Plasma deposition manufacturing,Plasma welding,Plasma wire deposition,plastic deformation,Plastic deformation of cutting edge,plastograph mixing,Ploughing,Point cloud,pojiv o,Polyethylene,Polylactic acid,Polymer,Polymers,Polyvinyl alcohol,porosity,Porosity,Porous materials,portafolio,portafolio digital,portafolio en l\'inea en,portafolios,portafolios formativo,Portafolios formativo,Post processing technique,Post-processing,Powder bed fusion,Powder Bed Fusion,Powder extrusion molding,Powder injection molding,powder injection moulding,Powder injection moulding,Powder Injection Moulding (PIM),powder metallurgy,Powder metallurgy,powder metallurgy area,Powder metallurgy steels (PMS),Powder metals,Powder-binder mixtures,Powder/binders Feedstocks,power distribution networks,pr\'actica,pr\'actica autolesiva,pr\'actica profesional docente,pr\'actica reflexiva,pr\'actica reflexiva docente,pr\'actica reflexiva.,pr\'acticum,Pre-sintering,Precision,pressing,Principal component analysis,Printability,Printing,Process analysis,process chain,process combination,Process comparison,Process control,Process design,process parameters,Process parameters,Process parameters tuning,Process planning,Process Planning,Processing parameters,Processmechanisms,profesgionalism,profesional,profesional - reflexi\'on,profesional docente,profesional y complejidad,profesionales,profesionalidad docente,profesionalizaci\'on,profesionalizaci\'on docente - autonom\'ia,profesor,Profesor en pr\dbend cticas,profesor estrat\'egico,profesor-mentor,profesorado de ciencias experimentales,Professional development,professional skills,PROGNOSIS,protective structures,Pr\dbend ctica pedag\dbend gica,psicoan\'alisis,Psicolog\'ia y educaci\'on,Qualitative research,Quality,radiation drying,Radiation Drying,Ramp-Up Management,Rapid manufacturing,Rapid Manufacturing,Rapid prototypes,rapid prototyping,Rapid prototyping,Rapid Prototyping,Rapid prototyping and manufacturing,Rapid technologies,rapid tooling,Rapid tooling,Recession of cutting edge,recfpro,Reconstructive implants,Recycling,Refexi\'on,reflection - social construction,reflective learning,reflexi\'on,Reflexi\'on pedag\'ogica,reflexi\'on-sobre-la-acci\'on,Regression analysis,Reproducibility,research,research on teachers,Research-action,response surface methodology,Response surface methodology - RSM,retroalimentaci\'on,Retrofitment,rev173art4,Rheological characteristics,Rheological property,Rheology,Risk-Taking,risks management,robocasting,Robocasting,Rol del profesor,Rotary Stage,Roughness improvement,s,s design of experiments,S-N curves,S-N data,Scaffold structure,scanning electron microscopy,Scanning electron microscopy (SEM),Scientific hardware,Scientific instruments,Seawater,segunda piel,selective laser melting,Selective laser melting,selective laser sintering,Self Mutilation,Self Mutilation: physiopathology,Self Mutilation: ultrasonography,Semi-solid alloy,sensitivas y motoras,Sex Distribution,SFF,Shape deposition manufacturing,Shaped metal deposition,Shaping,Shear viscosity,Si 3 N 4,SiAlON,Sigma phase,significaci\'on del pr\'acticum en,Silicon carbide,Simulation,Simulations,Sinter-hardening,sintered ceramics,Sintered/sinter-hardened steels,sintering,Sintering,Sintering parameter,situaci\'on probl\'emica,Size effect,Smart materials,Socializaci\dbend n,Software,Solid freeform fabrication,Solid Freeform Fabrication (SFF),solvent debinding,Solvent debinding,Spatter,Specific cutting force,specific interactions,specifick\'e,Speech Articulation Tests,Speech Intelligibility,spinal,Spinal fixation devices,Spiral flow test,Split-Hopkinson pressure bar,Springback,SS316L,Stability,stainless steel,Stainless steel,Stainless Steel,Stainless steel 17-4PH,Stainless steel 316 (SS),Stainless steel 316L,Stainless steel powder,Stainless steels,Staircase effect,Staircase error,State of the art,Statistical analysis,steel,Steel powder,stereolithography,Stereolithography process,Strain rate sensitivity,Streamlines,Stress corrosion cracking,Stress shielding,Subjectivity,Submicronic,Subsea,Subtractive,Subtractive manufacturing,Super duplex stainless steel,suporte da pr\'atica reflexiva,Support removal,Surface,Surface finish,Surface integrity,surface quality,Surface quality,Surface roughness,Surface Roughness,Surface topography,sustainability,Sustainability,Sustainable machining,Sustainable manufacturing,sustainable reconstruction,Syntactic foams,T,TA401-492,TaC,taguchi,Taguchi,Taguchi method,Taguchi methods,Tailor-Made-Manufacturing,Tailored deposition alignment,tarea probl\'emica,tattoo,tattooing,Tattooing,Tattooing: psychology,Tattooing: statistics \& numerical data,tattoos,tatuaje,Taxonomia de objetivos,Teacher development,Teacher education,teacher training,teachers professional development in,teaching portfolios as an,Technology,Technology innovation,technology within the,Tensile properties,Tensile property,Tensile strength,Tensile test,tensile test fibre-metal laminates,Terrestrial laser scanning,tesauro de la unesco,Test artifact,th161,the availability of highly,the forming of,the incorporation,the literature on tattoos,the reason for this,the reflexive approach to,the training of teachers,thermal debinding,Thermal properties,Thermally assisted machining,thermally sprayed aluminum,thermogravimetric analysis,Thermomechanical treatment,Thermoplastic 3D printing,thermoplastics,Thin-walled workpiece,this paper analyses the,Three dimensional printing,Three-dimensional printing,Ti-6Al-4V,Ti-6Al-4V alloy,Ti6AL4V,Time-temperature-transformation diagram,Titanium,titanium alloy,Titanium alloys,Titanium dioxide (TiO2),TK1-9971,TLS,to the progress of,Tongue,Tongue: injuries,Tongue: physiopathology,Tongue: ultrasonography,Tool edge radius,tool wear,Tool wear,Tool Wear,Tool wear mechanisms,toolmaking,training and views this,transferencia,trayectoria profesional,tsa,tubes,Tungsten,Tungsten carbide,tungsten carbide-cobalt,Tungsten carbide-cobalt composite,Tungsten cemented carbide,tungsten cemented carbides,tutores de la pr\'actica,Two-material PIM,ugr,Ultraviolet post-curing process and mechanical pro,uv,va,variable bead width,VC,vst\v{r}ikov\'an\'i pr\'a\v{s}kov\'ych materi\'al\r{u},was reviewed to see,WC-10.21 Co-0.42 VC/Cr3C2(wt\%),WC-10\%Co,WC-10Co,WC-20Co,WC-Co,WC-Co alloy,Weld deposition,Welding,Wick debinding,Wire arc additive manufacturing,Wire EDM,Wire extrusion,with teaching trends which,wk,Workpiece Orientation,www,XRD,Y-TZP,Young's modulus changeable titanium alloys,youth,Zirconia,ZrO2,{$\beta$}-SiAlON,{$\beta$}-type titanium alloys,\cyrchar\CYRZ\cyrchar\CYRA\cyrchar\CYRB\cyrchar\CYRO\cyrchar\CYRL\cyrchar\CYRE\cyrchar\CYRV\cyrchar\CYRA\cyrchar\CYRE\cyrchar\CYRM\cyrchar\CYRO\cyrchar\CYRS\cyrchar\CYRT\cyrchar\CYRSFTSN,\cyrchar\CYRK\cyrchar\CYRR\cyrchar\CYRERY\cyrchar\CYRM\cyrchar\CYRS\cyrchar\CYRK\cyrchar\CYRA\cyrchar\CYRYA{} \cyrchar\CYRG\cyrchar\CYRE\cyrchar\CYRM\cyrchar\CYRO\cyrchar\CYRR\cyrchar\CYRR\cyrchar\CYRA\cyrchar\CYRG\cyrchar\CYRI\cyrchar\CYRCH\cyrchar\CYRE\cyrchar\CYRS\cyrchar\CYRK\cyrchar\CYRA\cyrchar\CYRYA{} \cyrchar\CYRL\cyrchar\CYRI\cyrchar\CYRH\cyrchar\CYRO\cyrchar\CYRR\cyrchar\CYRA\cyrchar\CYRD\cyrchar\CYRK\cyrchar\CYRA,\cyrchar\CYRP\cyrchar\CYRR\cyrchar\CYRO\cyrchar\CYRG\cyrchar\CYRN\cyrchar\CYRO\cyrchar\CYRZ,\cyrchar\CYREREV\cyrchar\CYRP\cyrchar\CYRI\cyrchar\CYRD\cyrchar\CYRE\cyrchar\CYRM\cyrchar\CYRI\cyrchar\CYRO\cyrchar\CYRL\cyrchar\CYRO\cyrchar\CYRG\cyrchar\CYRI\cyrchar\CYRCH\cyrchar\CYRE\cyrchar\CYRS\cyrchar\CYRK\cyrchar\CYRA\cyrchar\CYRYA{} \cyrchar\CYRS\cyrchar\CYRI\cyrchar\CYRT\cyrchar\CYRU\cyrchar\CYRA\cyrchar\CYRC\cyrchar\CYRI\cyrchar\CYRYA,\cyrchar\CYREREV\cyrchar\CYRP\cyrchar\CYRI\cyrchar\CYRZ\cyrchar\CYRO\cyrchar\CYRO\cyrchar\CYRT\cyrchar\CYRO\cyrchar\CYRL\cyrchar\CYRO\cyrchar\CYRG\cyrchar\CYRI\cyrchar\CYRCH\cyrchar\CYRE\cyrchar\CYRS\cyrchar\CYRK\cyrchar\CYRI\cyrchar\CYRISHRT{} \cyrchar\CYRM\cyrchar\CYRO\cyrchar\CYRN\cyrchar\CYRI\cyrchar\CYRT\cyrchar\CYRO\cyrchar\CYRR\cyrchar\CYRI\cyrchar\CYRN\cyrchar\CYRG}, - file = {/Users/fabio/Zotero/storage/NX4CWC6T/Design of experiments using R.pdf} -} - -@misc{CEN-EuropeanCommitteeforStandardisation1996, - title = {{{EN ISO}} 527-2 {{Determination}} of Tensile Properties of Plastic}, - author = {{CEN - European Committee for Standardisation}}, - year = {1996}, - file = {/Users/fabio/Zotero/storage/4TEQ3YDV/EN ISO 527-2 Determination of tensile properties of plastic.pdf} -} - -@article{censkowskyUnderstandingRegimeShifts2021, - title = {Understanding {{Regime Shifts}} in {{Social-Ecological Systems Using Data}} on {{Direct Ecosystem Service Use}}}, - author = {Censkowsky, Philipp and Otto, Ilona M.}, - year = {2021}, - journal = {Frontiers in Environmental Science}, - volume = {9}, - issn = {2296-665X}, - urldate = {2022-10-23}, - abstract = {This paper takes a new look on transition processes in social-ecological systems, identified based on household use of direct ecosystem services in a case study in KwaZulu-Natal, South Africa. We build on the assumption that high dependence on local ecosystems for basic needs satisfaction corresponds to a ``green loop'' type of system, with direct feedbacks between environmental degradation and human well-being. Increasing use of distant ecosystems marks a regime shift and with that, the transition to ``red loops'' in which feedbacks between environmental degradation and human well-being are only indirect. These systems are characterized by a fundamentally different set of sustainability problems as well as distinct human-nature connections. The analysis of a case study in KwaZulu-Natal, South Africa, shows that social-ecological systems identified as green loops in 1993, the average share of households using a characteristic bundle of direct ecosystem services drops consistently (animal production, crop production, natural building materials, freshwater, wood). Conversely, in systems identified as red loops, mixed tendencies occur which underpins non-linearities in changing human-nature relationships. We propose to apply the green to red loop transition model to other geographical contexts with regards to studying the use of local ecosystem services as integral part of transformative change in the Anthropocene.}, - file = {/Users/fabio/Zotero/storage/KYAG2Y2W/Censkowsky y Otto - 2021 - Understanding Regime Shifts in Social-Ecological S.pdf} -} - -@article{Centobelli2020, - title = {Pursuing Supply Chain Sustainable Development Goals through the Adoption of Green Practices and Enabling Technologies: {{A}} Cross-Country Analysis of {{LSPs}}}, - author = {Centobelli, Piera and Cerchione, Roberto and Esposito, Emilio}, - year = {2020}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {153}, - pages = {119920}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119920} -} - -@article{cerdasLifeCycleAssessment2017, - title = {Life {{Cycle Assessment}} of {{3D Printed Products}} in a {{Distributed Manufacturing System}}}, - author = {Cerdas, Felipe and Juraschek, Max and Thiede, Sebastian and Herrmann, Christoph}, - year = {2017}, - journal = {Journal of Industrial Ecology}, - volume = {21}, - number = {S1}, - pages = {S80-S93}, - issn = {1530-9290}, - doi = {10.1111/jiec.12618}, - urldate = {2022-09-13}, - abstract = {Motivated by the rising costs of doing business overseas and the rise and implementation of digital technologies in production, new strategies are being explored to bring production and demand closer. While concepts like cloud computing, internet of things, and digital manufacturing increasingly gain relevance within the production activities of manufacturing companies, significant advances in three-dimensional (3D) printing technologies offer the possibility for companies to accelerate product development and to consider new supply chain models. Under this production scheme, material supply chains are redefined and energy consumption hotspots are relocated throughout the life cycle of a product. This implies a diversification of energy mixes and raw material sources that poses a risk of shifting problems between life cycle phases and areas of protection. This study compares a conventional mass scale centralized manufacturing system against a 3D printing-supported distributed manufacturing system on the basis of the production of one frame for eyeglasses using the life cycle assessment methodology. The study indicates clearly that the optimization potential is concentrated mainly in the energy consumption at the unit process level and exposes a close link to the printing material employed.}, - copyright = {\textcopyright{} 2017 The Authors. Journal of Industrial Ecology, published by Wiley Periodicals, Inc., on behalf of Yale University.}, - langid = {english}, - keywords = {3D printing,additive manufacturing,direct digital manufacturing,distributed manufacturing,industrial ecology,life cycle assessment (LCA)}, - file = {/Users/fabio/Zotero/storage/X48VASGJ/Cerdas et al. - 2017 - Life Cycle Assessment of 3D Printed Products in a .pdf;/Users/fabio/Zotero/storage/MST27843/jiec.html} -} - -@article{Cernev2019, - title = {The Importance of Achieving Foundational {{Sustainable Development Goals}} in Reducing Global Risk}, - author = {Cernev, Tom and Fenner, Richard}, - year = {2019}, - month = nov, - journal = {Futures}, - pages = {102492}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.102492} -} - -@article{Cervone2017, - title = {Personality {{Assessment}} \ding{73}}, - author = {Cervone, Daniel and Caprara, Gian V.}, - year = {2017}, - journal = {Reference Module in Neuroscience and Biobehavioral Psychology}, - number = {August 2015}, - pages = {1--3}, - doi = {10.1016/B978-0-12-809324-5.05666-2}, - isbn = {9780128093245}, - file = {/Users/fabio/Zotero/storage/QXF827VS/Personality assessment.pdf} -} - -@article{Cesaretti2014, - title = {Building Components for an Outpost on the {{Lunar}} Soil by Means of a Novel {{3D}} Printing Technology}, - author = {Cesaretti, Giovanni and Dini, Enrico and De Kestelier, Xavier and Colla, Valentina and Pambaguian, Laurent}, - year = {2014}, - month = jan, - journal = {Acta Astronautica}, - volume = {93}, - pages = {430--450}, - publisher = {{Elsevier}}, - issn = {00945765}, - doi = {10.1016/j.actaastro.2013.07.034}, - urldate = {2014-06-08}, - keywords = {3D printing,Direct manufacturing,Human exploration,Lunar habitat,Regolith,Structural optimisation}, - file = {/Users/fabio/Zotero/storage/VDFV4IZX/Building components for an outpost on the Lunar soil by means of a novel 3D printing technology.pdf} -} - -@article{cesaroEffectivenessWEEEMechanical2016, - title = {Effectiveness of {{WEEE}} Mechanical Treatment: {{Separation}} Yields and Recovered Material Toxicity}, - author = {Cesaro, Alessandra and Marra, Alessandra and Belgiorno, Vincenzo and Guida, Marco}, - year = {2016}, - doi = {10.1016/j.jclepro.2016.11.011}, - urldate = {2021-01-04}, - abstract = {Waste Electrical and Electronic Equipment (WEEE) is one of the fastest growing waste flow in developed countries. Although it is being regarded as an urban stock due to its composition in terms of valuable materials, the presence of hazardous substances raises great concern for their possible adverse effects on both human and environmental health. This work focuses on assessing the distribution of toxic materials after WEEE mechanical processing. Both input waste and output flows were sampled at a full-scale plant and characterised by their chemical-physical composition and toxicological response. The NOAEL concentrations were also estimated for each analysed flow. Experimental results showed that the mechanical selection process was efficient in removing the plastics from the metallic scraps, mainly aluminium and copper. However the latter output fractions were characterised by a higher potential toxicity than the input waste. This outcome suggests the need for further improvement of separation yields, in order to reduce the interactions among the hazardous substances affecting the toxic response of recovered materials. The content of these substances in electrical devices should also be lowered, so that the identification of NOAEL concentrations, evaluated in the present study as a first attempt in this direction, could be a suitable strategy.}, - keywords = {Electric and electronic waste,Hazard,Recycling,Risk,Selection efficiency}, - file = {/Users/fabio/Zotero/storage/XYBTF4Q6/full-text.pdf} -} - -@article{Ceschin2016, - title = {Evolution of Design for Sustainability: {{From}} Product Design to Design for System Innovations and Transitions}, - author = {Ceschin, Fabrizio and Gaziulusoy, Idil}, - year = {2016}, - month = nov, - journal = {Design Studies}, - volume = {47}, - pages = {118--163}, - publisher = {{Elsevier Ltd}}, - issn = {0142694X}, - doi = {10.1016/j.destud.2016.09.002}, - urldate = {2021-06-21}, - abstract = {The paper explores the evolution of Design for Sustainability (DfS). Following a quasi-chronological pattern, our exploration provides an overview of the DfS field, categorising the design approaches developed in the past decades under four innovation levels: Product, Product-Service System, Spatio-Social and Socio-Technical System. As a result, we propose an evolutionary framework and map the reviewed DfS approaches onto this framework. The proposed framework synthesizes the evolution of the DfS field, showing how it has progressively expanded from a technical and product-centric focus towards large scale system level changes in which sustainability is understood as a socio-technical challenge. The framework also shows how the various DfS approaches contribute to particular sustainability aspects and visualises linkages, overlaps and complementarities between these approaches.}, - keywords = {design for sustainability,design research,innovation,literature review,product design}, - file = {/Users/fabio/Zotero/storage/SHUU94L7/full-text.pdf} -} - -@book{ceschinDesignSustainabilityMultilevel2019, - title = {Design for {{Sustainability}}: {{A Multi-level Framework}} from {{Products}} to {{Socio-technical Systems}}}, - shorttitle = {Design for {{Sustainability}}}, - author = {Ceschin, Fabrizio and Gaziulusoy, {\.I}dil}, - year = {2019}, - month = sep, - publisher = {{Routledge}}, - address = {{London}}, - doi = {10.4324/9780429456510}, - abstract = {This book discusses the most significant ways in which design has been applied to sustainability challenges using an evolutionary perspective. It puts forward an innovation framework that is capable of coherently integrating multiple design for sustainability (DfS) approaches developed so far. It is now widely understood that design can and must play a crucial role in the societal transformations towards sustainability. Design can in fact act as a catalyst to trigger and support innovation, and can help to shape the world at different levels: from materials to products, product\textendash service systems, social organisations and socio-technical systems. This book offers a unique perspective on how DfS has evolved in the past decades across these innovation levels, and provides insights on its promising and necessary future development directions. For design scholars, this book will trigger and feed the academic debate on the evolution of DfS and its next research frontiers. For design educators, the book can be used as a supporting tool to design courses and programmes on DfS. For bachelor's and master's level design, engineering and management students, the book can be a general resource to provide an understanding of the historical evolution of DfS. For design practitioners and businesses, the book offers a rich set of practical examples, design methods and tools to apply the various DfS approaches in practice, and an innovation framework which can be used as a tool to support change in organisations that aim to integrate DfS in their strategy and processes. The Open Access version of this book, available at https://www.taylorfrancis.com/books/9780429456510, has been made available under a Creative Commons Attribution-Non Commercial-No Derivatives 4.0 license.}, - isbn = {978-0-429-45651-0}, - file = {/Users/fabio/Zotero/storage/YEKTJS3U/Ceschin_Gaziulusoy_2019_Design for Sustainability.pdf} -} - -@article{cfischSixTipsYour2018, - title = {Six Tips for Your (Systematic) Literature Review in Business and Management Research}, - author = {C Fisch, J Block}, - year = {2018}, - month = apr, - journal = {Manag Rev Q}, - volume = {68}, - number = {2}, - pages = {103--106}, - publisher = {{Springer Verlag}}, - doi = {10.1007/s11301-018-0142-x}, - urldate = {2021-07-15}, - file = {/Users/fabio/Zotero/storage/MHVTLZLV/full-text.pdf} -} - -@article{Chacon2017, - title = {Additive Manufacturing of {{PLA}} Structures Using Fused Deposition Modelling: {{Effect}} of Process Parameters on Mechanical Properties and~Their Optimal Selection}, - author = {Chac{\'o}n, J. M. and Caminero, M. A. and {Garc{\'i}a-Plaza}, E. and N{\'u}{\~n}ez, P. J.}, - year = {2017}, - journal = {Materials and Design}, - volume = {124}, - pages = {143--157}, - publisher = {{Elsevier Ltd}}, - issn = {18734197}, - doi = {10.1016/j.matdes.2017.03.065}, - abstract = {Fused deposition modelling is a rapidly growing additive manufacturing technology due to its ability to build functional parts having complex geometries. The mechanical properties of a built part depend on several process parameters. The aim of this study is to characterize the effect of build orientation, layer thickness and feed rate on the mechanical performance of PLA samples manufactured with a low cost 3D printer. Tensile and three-point bending tests are carried out to determine the mechanical response of the printed specimens. Due to the layer-by-layer process, 3D printed samples exhibit anisotropic behaviour. Upright orientation shows the lowest mechanical properties. On the other hand, on-edge and flat orientation show the highest strength and stiffness. From a layer thickness and feed rate point of view, it is observed that ductility decreases as layer thickness and feed rate increase. In addition, the mechanical properties increase as layer thickness increases and decrease as the feed rate increases for the upright orientation. However, the variations in mechanical properties with layer thickness and feed rate are of slight significance for on-edge and flat orientations, except in the particular case of low layer thickness. Finally, the practicality of the results is assessed by testing an evaluation structure.}, - keywords = {Failure analysis,Fused deposition modelling,Mechanical characterization,Polylactic acid (PLA),Process parameters}, - file = {/Users/fabio/Zotero/storage/FPZNRCTY/1-s2.0-S0264127517303143-main.pdf} -} - -@article{Chacon2019, - title = {Additive Manufacturing of Continuous Fibre Reinforced Thermoplastic Composites Using Fused Deposition Modelling: {{Effect}} of Process Parameters on Mechanical Properties}, - author = {Chac{\'o}n, J. M. and Caminero, M. A. and N{\'u}{\~n}ez, P. J. and {Garc{\'i}a-Plaza}, E. and {Garc{\'i}a-Moreno}, I. and Reverte, J. M.}, - year = {2019}, - journal = {Composites Science and Technology}, - volume = {181}, - number = {June 2018}, - pages = {107688}, - publisher = {{Elsevier}}, - issn = {02663538}, - doi = {10.1016/j.compscitech.2019.107688}, - abstract = {Continuous Fibre Reinforced Thermoplastic Composites (CFRTPCs) are becoming alternative materials to replace the conventional thermosetting polymers and metals due to excellent mechanical performance, recycling and potential used in lightweight structures. Fused deposition modelling (FDM) is a promising additive manufacturing technology and an alternative of conventional processes for the fabrication of CFRTPCs due to its ability to build functional parts having complex geometries. The mechanical properties of a built part depend on several process parameters. The aim of this study is to characterize the effect of build orientation, layer thickness and fibre volume content on the mechanical performance of 3D printed continuous fibre reinforced composites components manufactured by a desktop 3D printer. Tensile and three-point bending tests are carried out to determine the mechanical response of the printed specimens. SEM images of fractured surfaces are evaluated to determine the effects of process parameters on failure modes. It is observed that the effect of layer thickness of nylon samples on the mechanical performance is marginally significant. In addition, continuous fibre reinforced samples show higher strength and stiffness values than unreinforced ones. The results show that carbon fibre reinforced composites exhibit the best mechanical performance with higher stiffness and flat samples exhibit higher values of strength and stiffness than on-edge samples. Additionally, the results show that strength and stiffness increase as fibre volume content increases in most cases but, conversely, the level of increment in mechanical performance is moderate with continued rise in fibre content, particularly in the case of Kevlar\textregistered{} and glass fibres, due to weak bonding between the fibre/nylon layers as well as the presence of increased levels of defects. Finally, the practicality of the results is assessed by testing an evaluation structure.}, - keywords = {3D printing,Continuous fibre reinforced thermoplastic composit,Failure analysis,Fused deposition modelling,Mechanical characterization,Process parameters}, - file = {/Users/fabio/Zotero/storage/SNPULEYW/Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling- Effect of process parameters on mechanical properties.pdf} -} - -@article{chaconEffectNozzleDiameter2021, - title = {Effect of Nozzle Diameter on Mechanical and Geometric Performance of {{3D}} Printed Carbon Fibre-Reinforced Composites Manufactured by Fused Filament Fabrication}, - author = {Chac{\'o}n, Jes{\'u}s Miguel and Caminero, Miguel {\'A}ngel and N{\'u}{\~n}ez, Pedro Jos{\'e} and {Garc{\'i}a-Plaza}, Eustaquio and B{\'e}car, Jean Paul}, - year = {2021}, - month = jun, - journal = {Rapid Prototyping Journal}, - volume = {27}, - number = {4}, - pages = {769--784}, - publisher = {{Emerald}}, - issn = {1355-2546}, - doi = {10.1108/rpj-10-2020-0250}, - urldate = {2021-06-15}, - abstract = {Purpose: Fused filament fabrication (FFF) is one of the most popular additive manufacturing (AM) technologies due to its ability to build thermoplastic parts with complex geometries at low cost. The FFF technique has been mainly used for rapid prototyping owing to the poor mechanical and geometrical properties of pure thermoplastic parts. However, both the development of new fibre-reinforced filaments with improved mechanical properties, and more accurate composite 3D printers have broadened the scope of FFF applications to functional components. FFF is a complex process with a large number of parameters influencing product quality and mechanical properties, and the effects of the combined parameters are usually difficult to evaluate. An array of parameter combinations has been analysed for improving the mechanical performance of thermoplastic parts such as layer thickness, build orientation, raster angle, raster width, air gap, infill density and pattern, fibre volume fraction, fibre layer location, fibre orientation and feed rate. This study aims to assess the effects of nozzle diameter on the mechanical performance and the geometric properties of 3D printed short carbon fibre-reinforced composites processed by the FFF technique. Design methodology approach: Tensile and three-point bending tests were performed to characterise the mechanical response of the 3D printed composite samples. The dimensional accuracy, the flatness error and surface roughness of the printed specimens were also evaluated. Moreover, manufacturing costs, which are related to printing time, were evaluated. Finally, scanning electron microscopy images of the printed samples were analysed to estimate the porosity as a function of the nozzle diameter and to justify the effect of nozzle diameter on dimensional accuracy and surface roughness. Findings: The effect of nozzle diameter on the mechanical and geometric quality of 3D printed composite samples was significant. In addition, large nozzle diameters tended to increase mechanical performance and enhance surface roughness, with a reduction in manufacturing costs. In contrast, 3D printed composite samples with small nozzle diameter exhibited higher geometric accuracy. However, the effect of nozzle diameter on the flatness error and surface roughness was of slight significance. Finally, some print guidelines are included. Originality value: The effect of nozzle diameter, which is directly related to product quality and manufacturing costs, has not been extensively studied. The presented study provides more information regarding the dependence of the mechanical, microstructural and geometric properties of short carbon fibre-reinforced nylon composite components on nozzle diameter.}, - keywords = {Carbon fibre-reinforced composites,Dimensional accuracy,Fused filament fabrication,Mechanical characterisation,Nozzle diameter,Rapid prototyping} -} - -@article{chakoriTakingWholeofsystemApproach2022, - ids = {chakori2022a}, - title = {Taking a Whole-of-System Approach to Food Packaging Reduction}, - author = {Chakori, Sabrina and Richards, Russell and Smith, Carl and Hudson, Nicholas J. and Abdul Aziz, Ammar}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {338}, - pages = {130632}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130632}, - urldate = {2022-02-09}, - abstract = {Food packaging use is a wicked problem that is increasingly impacting on the environment. Current efforts to solve this global challenge are fragmented, fixating on single issues rather than on a `whole-of-system' approach. To address this, we have used a novel approach combining systems thinking and network analysis to map out food packaging use in food systems. This process draws from experts across the Australian food system. We report three main results. First, the resulting Causal Loop Diagram sheds light on the experts' mental models about food packaging use. Second, current interventions fail because they tackle the symptoms of the problem and not the drivers. Third, the ten most influential food packaging drivers are presented and belong to the globalisation and household subsystems. The findings highlight that dependence on packaging is a symptom of the growth-driven globalised food market and time-deprived society. Finally, we demonstrate that shifting the current food systems towards economic degrowth principles could potentially curb the use of food packaging. Under a degrowth framework the need for packaged food could be reduced by eliminating the tension between cooking and working time constraints. Designing for a not-for-profit food economy and re-localising it would also reduce the need for packaging.}, - file = {/Users/fabio/Zotero/storage/LIWQEK76/Chakori et al. - 2022 - Taking a whole-of-system approach to food packagin.pdf} -} - -@article{chakoriUntanglingUnderlyingDrivers2021, - title = {Untangling the Underlying Drivers of the Use of Single-Use Food Packaging}, - author = {Chakori, Sabrina and Aziz, Ammar Abdul and Smith, Carl and Dargusch, Paul}, - year = {2021}, - month = jul, - journal = {Ecological Economics}, - volume = {185}, - pages = {107063}, - publisher = {{Elsevier BV}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107063}, - urldate = {2021-04-29}, - abstract = {Global production and use of food packaging have steadily increased since the 1960s. Packaging waste is now considered one of the world's most urgent environmental problems. Most responses to the problem have focused on recycling or the introduction of biomass-based materials. Whilst useful, these approaches focus on managing the symptoms and do not address why the food system has become reliant on single-use packaging. In this paper we use systems method to understand the drivers for the food packaging problem. We apply the first two steps of the systems method to develop a Causal Loop Diagram representing variables and feedback loops that influence the use of food packaging. The modelling process has been supported by a narrative literature review and by the analysis of the behaviour over time. The results show that there are three main interlinked subsystems that drive food packaging use: the globalisation, the expansion of supermarkets and the constraints on households' time. In order to reduce food packaging, structural changes are required. Shifting away from a growth-driven food economy towards a degrowth economic model may reduce the need for food packaging. Redesigning and decentralising food systems are just some of the potential solutions.} -} - -@article{chakrabortySystematicReviewIndustrylevel2022, - title = {A Systematic Review of Industry-Level Applications of Technology Roadmapping: {{Evaluation}} and Design Propositions for Roadmapping Practitioners}, - author = {Chakraborty, Swagata and Nijssen, Edwin J. and Valkenburg, Rianne}, - year = {2022}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {179}, - pages = {121141}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121141}, - urldate = {2022-04-11} -} - -@article{chalkiadakisEcosystemServiceFlows2022, - title = {Ecosystem Service Flows: {{A}} Systematic Literature Review of Marine Systems}, - author = {Chalkiadakis, Charis and Drakou, Evangelia G. and Kraak, Menno Jan}, - year = {2022}, - month = apr, - journal = {Ecosystem Services}, - volume = {54}, - pages = {101412}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2022.101412}, - urldate = {2022-03-13}, - abstract = {Understanding and quantifying ES flows is essential for the sustainable management of social-ecological systems, as it directly captures the human-nature interactions within the system and not solely its individual elements. Especially in degrading marine systems, most ES assessments focus solely on either biophysical or socio-economic elements of these social-ecological systems, failing to directly capture the human-nature interactions. This systematic literature review aims to capture the state of the art of ES flow studies to improve the knowledge base on marine ES flows while highlighting knowledge gaps and discussing future research pathways. Within the review we extract information on: i) the ES flow definitions, classification systems, and indicators; ii) the scales of assessment and methods used to assess marine ES flows; and iii) the types of assessment outputs. 82\% of the reviewed ES flow assessment methods were spatially explicit. 63\% of the studies assess marine ES flows locally. Across-scale ES flows are rarely taken into account. We detect a broad range of conceptualizations within marine ES flow literature. We thus propose an updated definition for ES flows in which they are defined as a spectrum within the social-ecological system, within which different ES flow indicators are placed depending on the relative contributions of biophysical or socio-economic attributes. Based on the extracted information and detected literature gaps, we propose a set of four criteria that should be the minimum required information when referring to ES flows: i) the relative contributions of biophysical and socio-economic attributes present in ES flow indicators; ii) identification of the supplying and receiving systems; iii) the direction and branches of flows; and iv) the spatial and temporal scales across which ES flows occur.}, - keywords = {Boundary object,Coastal,Marine,Scale,Spatial,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/TKJ5KP3R/full-text.pdf} -} - -@article{chamaneeGlobalPerspectiveMicroplastics2023, - title = {Global Perspective on Microplastics in Landfill Leachate; {{Occurrence}}, Abundance, Characteristics, and Environmental Impact}, - author = {Chamanee, Gayathri and Sewwandi, Madushika and Wijesekara, Hasintha and Vithanage, Meththika}, - year = {2023}, - month = nov, - journal = {Waste Management}, - volume = {171}, - pages = {10--25}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.08.011}, - urldate = {2023-08-31}, - abstract = {Plastic wastes deposited in landfills eventually break down and degrade into microplastics by physical, chemical, and biological forces. Though microplastics in leachate pose significant threats to the environment, the leachate generated from landfills has not received much attention as a possible source of environmental microplastics. A descriptive and systematic investigationof the global distribution of microplastics in landfill leachate does not exist to date. Therefore, this attempt is to provide a concise scientometric review of the studies on the presence of microplastics in landfill leachate. The present review revealed that the global trend in research on microplastics in leachate has increased exponentially after 2018 and China is the leading country. Different geographical regions have reported different microplastic abundances with the highest of 291.0~{$\pm~$}91.0 items/L from a landfill in Shanghai. The use of novel sampling techniques to detect small microplastics (20\textendash 100~\textmu m) has led to the high abundance of microplastics in landfill leachate in Shanghai. Due to its widespread usage, polyethylene is the most typically encountered polymer type in landfill leachate around the world. However, it is quite challengingto compare the results among studies due to the use of different size categories and extraction techniques. The removal of microplastics by the current leachate treatment facilities is still mostly unexplored, thus it is crucial to develop novel technologies to treat the microplastics in landfill leachate. Further investigations on the transport of microplastics in landfill leachate are urgently required to have a better understanding of potential human exposure and health implications.}, - keywords = {Microplastic pollution,Open dumpings,Plastic waste,Polyethylene,Urban plastics}, - file = {/Users/fabio/Zotero/storage/C8QKLH7B/S0956053X23005196.html} -} - -@article{Chammas2020, - title = {Transdisciplinary Interventions for Environmental Sustainability}, - author = {Chammas, Ghina and Kayed, Sammy and Al Shami, Anwar and Kays, Wassim and Citton, Michele and Kalot, Mohamad and Al Marj, Elie and Fakhr, Marwan and Yehya, Nadine A. and Talhouk, Salma N. and {Al-Hindi}, Mahmoud and {Zein-El-Dine}, Salah and Tamim, Hani and Lakkis, Issam and Abou Najm, Majdi and Saliba, Najat A.}, - year = {2020}, - month = apr, - journal = {Waste Management}, - volume = {107}, - pages = {159--171}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.03.043}, - urldate = {2020-05-08}, - abstract = {This paper presents a case study of a transdisciplinary research based on an ex-post assessment of the environmental and socio-behavioral contexts of solid waste management in Lebanese peri-urban communities. Lessons learned are compiled into the Transdisciplinary Interventions for Environmental Sustainability conceptual framework. The approach starts with building a team of researchers and non-academic partners, continues with co-creating solution-oriented knowledge, and ends by integrating and applying the produced knowledge. The co-created knowledge includes the environmental and socio-behavioral ex-post assessment's results. The former reveals low air pollution levels, evidence of waste-related water contamination, and higher self-reported frequencies of ill-health symptoms and diseases closer to the landfill. The latter indicates that the community's perception about waste production differs from the real accounting of generated waste. Nine lessons are identified: (1) inherent common interest between the researchers and the community, (2) flexible interdisciplinary research team, (3) representative citizen committee, (4) contextually-informed outreach coordinator, (5) iterative research process accounting for the shifting socio-political context, (6) common expectations of the research process, (7) boundary objects leading to spin-off activities in the same setting, (8) effective communication strategy, and (9) ex-post assessment of subsequent societal and scientific impacts. The non-phased framework links all nine pointers in a logical order to ease scalability. The study answers a global need for a unified, clear, broadly adopted framework for transdisciplinarity and a deeper understanding of factors ensuring full-circle knowledge co-creation in waste-related contexts in the global South. The study offers managerial and research implications and suggests avenues for further research.}, - pmid = {32283490}, - keywords = {Co-creation,Global South,Lebanon,Solid waste management,Transdisciplinary sustainability research}, - file = {/Users/fabio/Zotero/storage/EUD3P47K/full-text.pdf} -} - -@article{Chan1996, - title = {Environmental Attitudes and Behaviour of Secondary School Students in {{Hong Kong}}}, - author = {Chan, Kara K. W.}, - year = {1996}, - month = dec, - journal = {The Environmentalist}, - volume = {16}, - number = {4}, - pages = {297--306}, - issn = {0251-1088}, - doi = {10.1007/BF02239656} -} - -@article{Chan2013, - title = {A Moral Basis for Recycling: {{Extending}} the Theory of Planned Behaviour}, - author = {Chan, Lucy and Bishop, Brian}, - year = {2013}, - month = dec, - journal = {Journal of Environmental Psychology}, - volume = {36}, - pages = {96--102}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2013.07.010}, - file = {/Users/fabio/Zotero/storage/JLQHGBLA/Moral-basis.pdf} -} - -@article{chandraSelectionAdditiveManufacturing2022, - title = {Selection for Additive Manufacturing Using Hybrid {{MCDM}} Technique Considering Sustainable Concepts}, - author = {Chandra, Mukesh and Shahab, Faisal and KEK, Vimal and Rajak, Sonu}, - year = {2022}, - month = feb, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-06-2021-0155}, - urldate = {2022-02-09}, - abstract = {In the present scenario, the demand for additive manufacturing (AM) has increased. Taking into account environmental problems and sustainability, manufacturers are now also considering the environmental and sustainability criteria in their decision-making process. The sustainability concept is known as the triple-bottom line, namely, economic, social and environmental perspectives. Sustainable concept selection in the manufacturing organisation can be considered as the selection of sustainable material, product design, process, method and technology. This study aims to select an appropriate AM process by considering sustainability from various available techniques.,Appropriate sustainable performance indicators for the AM were identified based on literature as well as in discussion with experts and decision-makers. The model addresses all the major dimensions of sustainable concepts of AM such as material/product quality, machine performance, market stability, total cost and ecological values. A hybrid multi-criteria decision-making approach, i.e. stepwise weight assessment ratio analysis and complex proportional assessment methods, have been used to select the best AM technique. While selecting criteria affecting AM machines and processes, criteria based on the sustainable concept are considered.,Among the four selected AM processes, i.e. fused diffusion modelling (FDM), laminated object manufacturing (LOM), stereolithography apparatus (SLA) and selective laser sintering (SLS), the best alternative was found to be FDM.,The present study highlights some limitations in the selection of AM process and methodology used in this research. This study considers only four AM processes, i.e. FDM, LOM, SLA and SLS. Future work may include considering other AM processes and criteria that affect the sustainability of AM.,The present work will help researchers and production managers to decide the best AM alternatives to fabricate desired parts. Hence, AM can help in maximum energy utilisation, optimal consumption of resources, minimum material wastage and reduction of CO2 emission.,The study considers some important criteria, including energy consumption, eco-friendly and wastage-free production, that help sustainable AM. This study can result in a good economic efficiency of AM industries and, therefore, positively impact customers using green products.}, - keywords = {Additive manufacturing,COPRAS,Multi-criteria decision-making (MCDM),Sustainability,SWARA} -} - -@article{Chang2010, - title = {Studies on Profile Error and Extruding Aperture for the {{RP}} Parts Using the Fused Deposition Modeling Process}, - author = {Chang, Dar-Yuan and Huang, Bao-Han}, - year = {2010}, - month = aug, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {53}, - number = {9-12}, - pages = {1027--1037}, - issn = {0268-3768}, - doi = {10.1007/s00170-010-2882-1}, - urldate = {2013-04-24}, - keywords = {extruding aperture,fdm,image measurement,profile error,s method,taguchi}, - file = {/Users/fabio/Zotero/storage/J9J7QFJQ/Chang, Huang - 2010 - Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process.pdf} -} - -@inproceedings{Chang2016, - title = {{{OpenWSN}} \& {{OpenMote}}: {{Demo}}'ing a Complete Ecosystem for the Industrial Internet of Things}, - booktitle = {2016 13th Annu. {{IEEE}} Int. {{Conf}}. {{Sensing}}, Commun. {{Netw}}.}, - author = {Chang, Tengfei and {Tuset-Peiro}, Pere and Vilajosana, Xavier and Watteyne, Thomas}, - year = {2016}, - month = jun, - pages = {1--3}, - publisher = {{IEEE}}, - doi = {10.1109/SAHCN.2016.7733004}, - isbn = {978-1-5090-1732-4} -} - -@article{chanRethinkingEcosystemServices2012, - title = {Rethinking Ecosystem Services to Better Address and Navigate Cultural Values}, - author = {Chan, Kai M.A. and Satterfield, Terre and Goldstein, Joshua}, - year = {2012}, - month = feb, - journal = {Ecological Economics}, - volume = {74}, - pages = {8--18}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2011.11.011}, - urldate = {2021-04-23}, - abstract = {Ecosystem service approaches have become a prominent basis for planning and management. Cultural services and non-use values are included in all major typologies and present some of the most compelling reasons for conserving ecosystems, though many barriers exist to their explicit characterization. The values that conform least well to economic assumptions-variously lumped together with/as cultural services-have proven elusive in part because valuation is complicated by the properties of intangibility and incommensurability, which has in turn led to their exclusion from economic valuation. We argue that the effectiveness of the ecosystem services framework in decision-making is thwarted by (i) conflation of services, values, and benefits, and (ii) failure to appropriately treat diverse kinds of values. We address this challenge by (1) distinguishing eight dimensions of values, which have implications for appropriate valuation and decision-making; (2) demonstrating the interconnected nature of benefits and services, and so the ubiquity of intangible values; (3) discussing the implications of these propositions for ecosystem-services research; and (4) outlining briefly a research agenda to enable decision-making that is ecologically appropriate and socially just. Because many ecosystem services (co-)produce 'cultural' benefits, full characterization of services must address non-material values through methods from diverse social sciences. \textcopyright{} 2011 Elsevier B.V..}, - keywords = {Cultural ecosystem services,Ecosystem-based management,Environmental policy,Environmental values and valuation,Incommensurability,Non-use values} -} - -@article{chaplin-kramerLifeCycleAssessment2017, - title = {Life Cycle Assessment Needs Predictive Spatial Modelling for Biodiversity and Ecosystem Services}, - author = {{Chaplin-Kramer}, Rebecca and Sim, Sarah and Hamel, Perrine and Bryant, Benjamin and Noe, Ryan and Mueller, Carina and Rigarlsford, Giles and Kulak, Michal and Kowal, Virginia and Sharp, Richard and Clavreul, Julie and Price, Edward and Polasky, Stephen and Ruckelshaus, Mary and Daily, Gretchen}, - year = {2017}, - month = apr, - journal = {Nature Communications 2017 8:1}, - volume = {8}, - number = {1}, - pages = {1--8}, - publisher = {{Nature Publishing Group}}, - issn = {2041-1723}, - doi = {10.1038/ncomms15065}, - urldate = {2021-07-19}, - abstract = {International corporations in an increasingly globalized economy exert a major influence on the planet's land use and resources through their product design and material sourcing decisions. Many companies use life cycle assessment (LCA) to evaluate their sustainability, yet commonly-used LCA methodologies lack the spatial resolution and predictive ecological information to reveal key impacts on climate, water and biodiversity. We present advances for LCA that integrate spatially explicit modelling of land change and ecosystem services in a Land-Use Change Improved (LUCI)-LCA. Comparing increased demand for bioplastics derived from two alternative feedstock-location scenarios for maize and sugarcane, we find that the LUCI-LCA approach yields results opposite to those of standard LCA for greenhouse gas emissions and water consumption, and of different magnitudes for soil erosion and biodiversity. This approach highlights the importance of including information about where and how land-use change and related impacts will occur in supply chain and innovation decisions. Life cycle assessments are used by corporations to determine the sustainability of raw source materials. Here, Chaplin-Krameret al. develop an improved life cycle assessment approach incorporating spatial variation in land-use change, and apply this framework to a bioplastic case study.}, - keywords = {Agriculture,Ecosystem services,Environmental impact,Technology}, - file = {/Users/fabio/Zotero/storage/3M3MK5T3/full-text.pdf} -} - -@article{Charles2021, - title = {Designing Industrial Landscapes for Mitigating Air Pollution with Spatially-Explicit Techno-Ecological Synergy}, - author = {Charles, Michael and Bakshi, Bhavik R.}, - year = {2021}, - month = oct, - journal = {AIChE Journal}, - volume = {67}, - number = {10}, - pages = {e17347}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {15475905}, - doi = {10.1002/aic.17347}, - urldate = {2021-09-20}, - abstract = {Air pollution has posed health and environmental threats since the Industrial Revolution. Technological solutions present major expenses for industry, yet nature's ecosystems also provide pollution uptake. In the pursuit of techno-ecological sustainable design, this work presents a framework for spatially-explicit industrial site design that determines where and when ecological restoration should be considered. The framework considers land use changes and identifies the cheapest balance between technological and ecological uptake for industrial landscapes, including the impacts of long term ecological growth dynamics. This work presents the framework's construction along with a case study conducted for a coal-fired power station in Ohio. The results provide spatial maps of proposed restoration areas, projected savings values, and spatial-temporal maps that consider annual budget constraints. The results demonstrate a significant sensitivity to land use restoration costs and highlights ecological advantages, like simultaneous uptake of different chemical species.}, - keywords = {air pollution,ecosystem services,landscape design,optimization,sustainable design}, - file = {/Users/fabio/Zotero/storage/93DE62WJ/full-text.pdf} -} - -@article{charlesConnectingAirQuality2020, - title = {Connecting Air Quality Regulating Ecosystem Services with Beneficiaries through Quantitative Serviceshed Analysis}, - author = {Charles, Michael and Ziv, Guy and Bohrer, Gil and Bakshi, Bhavik R.}, - year = {2020}, - month = feb, - journal = {Ecosystem Services}, - volume = {41}, - pages = {101057}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2019.101057}, - urldate = {2021-09-20}, - abstract = {In response to the growth of ecosystem services research, many concepts have emerged to understand how we connect ecosystem services with the human populations whom receive the benefits. Servicesheds are one of these emerging concepts and can be qualitatively described as the areas which provide ecosystem services to specific beneficiaries. Previous research lacks the use of mathematical, spatially-explicit models to connect beneficiaries with the ecosystem services that are provided to them by neighboring ecosystems. Working with an atmospheric dispersion model, CALPUFF, this research focuses on air quality regulating ecosystem services and specifically, dry deposition of gaseous pollutants. Multiple quantitative, reproducible, and spatially-explicit definitions of the serviceshed concept are proposed. The various definitions are dependent on the model's results for concentration and dry deposition values. To discuss the application of these quantitative serviceshed definitions, a case study is conducted for a biodiesel manufacturing site in Cincinnati, OH. The results of the proposed serviceshed definitions yield different and complimentary information for the air quality regulation services. The results of these spatially-explicit definitions yield maps with serviceshed boundaries, which can inform ecosystem restoration and management decisions.}, - keywords = {Air quality regulation,Atmospheric transport,Ecosystem service mapping,Ecosystem service valuation,Serviceshed,Spatial modeling} -} - -@article{charlonFusedFilamentFabrication2021, - title = {Fused Filament Fabrication of Polypropylene: Influence of the Bead Temperature on Adhesion and Porosity}, - author = {CHARLON, S{\'e}bastien and LE BORTERFF, Julien and SOULESTIN, J{\'e}r{\'e}mie}, - year = {2021}, - month = jan, - journal = {Additive Manufacturing}, - pages = {101838}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.101838}, - urldate = {2021-01-10} -} - -@article{charpentierUrbanMiningUnexploited2023, - title = {Urban Mining of Unexploited Spent Critical Metals from {{E-waste}} Made Possible Using Advanced Sorting}, - author = {Charpentier, Nicolas M. and Maurice, Ange A. and Xia, Dong and Li, Wen-Jie and Chua, Chang-Sian and Brambilla, Andrea and Gabriel, Jean-Christophe P.}, - year = {2023}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {196}, - pages = {107033}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107033}, - urldate = {2023-05-31}, - abstract = {The growing number of electronic devices has led to a surge in e-waste, making efficient recycling essential to reduce environmental impact and recover valuable metals. However, traditional recycling methods struggle to extract them due to their low concentrations in e-waste. Here, we developed a system to sort electronic components from printed circuit boards by elemental composition. It combines a convolutional neural network-based optical recognition with multi-energy X-ray transmission spectroscopy, demonstrating up to 96.9\% accuracy in controlled conditions. Hence, with elemental enrichments by up to 10,000 for targeted elements, this method renders economically viable the recovery of previously unrecycled critical metals by enriching sorting bags in precious, semi-precious, refractory (Ta, Nb), transition (Co, Cr, Mn, Ni, Zn, Ga, Bi, etc.) or other (In, Sn, Sb) metals. These findings demonstrate the promising applications of this technology in mitigating the environmental impact of e-waste and promoting the sustainable recovery of valuable metals.}, - langid = {english}, - keywords = {Computer vision,Hyperspectral imaging,Multi-energy X-ray transmission,Recycling,Waste management,Waste PCBs}, - file = {/Users/fabio/Zotero/storage/RBZXRFK3/Charpentier et al. - 2023 - Urban mining of unexploited spent critical metals .pdf;/Users/fabio/Zotero/storage/MY6HCRZ6/S0921344923001696.html} -} - -@article{Chase2009, - title = {``{{This Is Public Health}}: {{Recycling Counts}}!'' {{Description}} of a {{Pilot Health Communications Campaign}}}, - author = {Chase, Nancy and Dominick, Gregory and Trepal, Amy and Bailey, Leanne and Friedman, Daniela}, - year = {2009}, - month = nov, - journal = {International Journal of Environmental Research and Public Health}, - volume = {6}, - number = {12}, - pages = {2980--2991}, - issn = {1660-4601}, - doi = {10.3390/ijerph6122980} -} - -@article{Chau1997, - title = {Factors Affecting the Adoption of Open Systems: {{An}} Exploratory Study}, - author = {Chau, Patrick Y. K. and Tam, Kar Yan}, - year = {1997}, - month = mar, - journal = {MIS Q.}, - volume = {21}, - number = {1}, - eprint = {249740}, - eprinttype = {jstor}, - pages = {1}, - publisher = {{Management Information Systems Research Center, University of Minnesota}}, - issn = {02767783}, - doi = {10.2307/249740}, - abstract = {Advocates of open systems believe that problems related to compatibility, interoperability, scalability, and efficient use of IT resources can be resolved by setting software and hardware standards and strictly adhering to these standards in systems development and management. Representing a major departure from the traditional way of running an IS operation, the adoption of open systems has major ramifications on the IT infrastructure with long-lasting effects. Unfortunately, little research has been done to study this ubiquitous phenomenon despite its impacts on organizational computing worldwide. To fill this research gap, a model that incorporates seven factors perceived to affect the adoption is developed and tested. In-depth interviews with senior executives responsible for managing corporate IS functions from 89 organizations were conducted to collect data for empirical analysis. The findings suggest that organizations tend to (1) focus more on their "ability to adopt" than on the "benefits from adoption," and (2) take a "reactive" rather than "proactive" attitude in adopting open systems technology. Managerial implications are also discussed.} -} - -@article{Chaudhari2021, - title = {Systems {{Analysis Approach}} to {{Polyethylene Terephthalate}} and {{Olefin Plastics Supply Chains}} in the {{Circular Economy}}: {{A Review}} of {{Data Sets}} and {{Models}}}, - author = {Chaudhari, Utkarsh S. and Lin, Yingqian and Thompson, Vicki S. and Handler, Robert M. and Pearce, Joshua M. and Caneba, Gerard and Muhuri, Prapti and Watkins, David and Shonnard, David R.}, - year = {2021}, - month = jun, - journal = {ACS Sustainable Chemistry \& Engineering}, - volume = {9}, - number = {22}, - pages = {7403--7421}, - issn = {2168-0485}, - doi = {10.1021/acssuschemeng.0c08622} -} - -@article{Chaudhary2020, - title = {Circular Economy Model of Gold Recovery from Cell Phones Using System Dynamics Approach: A Case Study of {{India}}}, - author = {Chaudhary, Karishma and Vrat, Prem}, - year = {2020}, - month = jan, - journal = {Environment, Development and Sustainability}, - volume = {22}, - number = {1}, - pages = {173--200}, - issn = {1387-585X}, - doi = {10.1007/s10668-018-0189-9} -} - -@article{Chaudhuri2019, - title = {The Role of Service Providers in {{3D}} Printing Adoption}, - author = {Chaudhuri, Atanu and Rogers, Helen and Soberg, Peder and Pawar, Kulwant S.}, - year = {2019}, - month = jul, - journal = {Industrial Management \& Data Systems}, - volume = {119}, - number = {6}, - pages = {1189--1205}, - issn = {0263-5577}, - doi = {10.1108/IMDS-08-2018-0339} -} - -@article{Chauhan2021, - title = {The Interplay of Circular Economy with Industry 4.0 Enabled Smart City Drivers of Healthcare Waste Disposal}, - author = {Chauhan, Ankur and Jakhar, Suresh Kumar and Chauhan, Chetna}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {279}, - pages = {123854}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123854}, - urldate = {2020-08-31}, - abstract = {Generation of healthcare waste from different patient care activities in hospitals, pathology labs and research centres has been a matter of great concern for environmental and social bodies across the world. This concern comes from its infectious and hazardous nature which brings life taking disease such as human immunodeficiency virus and Hepatitis-B. Moreover, with the outbreak of corona virus disease 2019 (COVID-19) pandemic across the world, healthcare waste has become even more infectious like never before and showing its potential for claiming lives if not disposed properly. Additionally, the COVID-19 has put up another challenge in terms of exponentially increasing demand for personal protective equipments for healthcare workers such as doctors, nurses, ward boys, and sanitation workers. In this paper, seven criteria related to smart healthcare waste disposal system infused by circular economy aspects to recover value from disposables are identified and analysed using a decision making trial and evaluation laboratory (DEMATEL) method. The criteria have been prioritized by its importance and net cause and effect relationship through a causal diagram. Two criteria, (i) digitally connected healthcare centres, waste disposal firms and pollution control board, and (ii) providing a pollution control board's feedback app to public and other stakeholders, feature as strong reasons for a smart healthcare waste disposal system. Conclusively, this study provides a causal relationship model among the intertwined drivers of industry 4.0 and circular economy for developing a smart healthcare waste disposal system enriched with the benefits of circular economy.}, - keywords = {Circular economy,COVID-19,Healthcare waste,Industry 4.0,IoT,Multi-criteria decision making,Smart city}, - file = {/Users/fabio/Zotero/storage/8GJ7VBIC/full-text.pdf} -} - -@article{chauhanLinkingCircularEconomy2022, - title = {Linking Circular Economy and Digitalisation Technologies: {{A}} Systematic Literature Review of Past Achievements and Future Promises}, - author = {Chauhan, Chetna and Parida, Vinit and Dhir, Amandeep}, - year = {2022}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {177}, - pages = {121508}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2022.121508}, - urldate = {2022-01-25} -} - -@article{Cheah2019, - title = {External Oriented Resources and Social Enterprises' Performance: {{The}} Dominant Mediating Role of Formal Business Planning}, - author = {Cheah, Jeffrey and Amran, A. and Yahya, S.}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117693}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117693}, - urldate = {2020-05-10}, - abstract = {Social entrepreneurship has been recognized as an innovative and effective approach to poverty reduction and employment generation. However, the roles undertaken by social enterprises in Malaysia and Singapore are still limited and many are grappling to survive. Determine the external resources that could increase social enterprises' efficiencies and performance, are the key management issues for the external supportive bodies. Guiding by the resource dependence theory, this cross-nation quantitative study established a framework to examine the most prominent external resources (i.e., financial and training supports), which were mediated by formal business planning, towards the financial and social performance of social enterprises in the emerging contexts (i.e., Malaysia and Singapore). The empirical data on 181 Malaysian and Singaporean social enterprises were analysed by using a structural equation modelling approach. The research findings reveal that financial and training supports should be correlated closely with formal business planning in order to generate a significant impact on their organisational performance. The results showed business planning plays a dominant role between the external supports and social enterprises' performance. This challenges the conventional knowledge that common business practices of profit-driven companies are not suitable for mission-driven organisations. The moderation effects of the socio-economic context were found to be insignificant. The research model's predictive power and predictive capability for all the endogenous constructs were satisfied and assured. Furthermore, the Importance-Performance Map Analysis corresponded with the path coefficient results, the main factor to enhance social enterprises' performance is through the improvement in business planning practices, and financial support is another area to enhance their social performance.}, - keywords = {External resources,Malaysia,Organisation performance,Resource dependence theory,Singapore,Social enterprise} -} - -@article{cheahEffectSpaceCreativity2021, - title = {Effect of Space Creativity and Social Climate on Business Model Innovation in {{Do-it-Yourself}} Laboratories: The Mediating Role of Opportunity Discovery in the Case of {{Singapore}}}, - author = {Cheah, Sarah Lai-Yin and Ho, Yuen-Ping}, - year = {2021}, - month = sep, - journal = {https://doi.org/10.1080/09537325.2021.1976404}, - pages = {1--15}, - publisher = {{Routledge}}, - doi = {10.1080/09537325.2021.1976404}, - urldate = {2021-09-15}, - abstract = {In the recent decade, Do-it-Yourself laboratories (DIY labs) have proliferated in many cities across developing and developed economies. Although these labs play an important role in the innovation...}, - keywords = {Business model innovation,DIY laboratories,opportunity discovery,social climate,space creativity} -} - -@article{Chen2015, - title = {Direct Digital Manufacturing: Definition, Evolution, and Sustainability Implications}, - author = {Chen, Danfang and Heyer, Steffen and Ibbotson, Suphunnika and Salonitis, Konstantinos and Steingr{\'i}msson, J{\'o}n Gar{\dh}ar and Thiede, Sebastian}, - year = {2015}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {107}, - pages = {615--625}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2015.05.009}, - abstract = {One of the hot topics currently in manufacturing domain is direct digital manufacturing. With introduction of cheap three-dimensional printers, the direct digital manufacturing seems to become a new manufacturing paradigm with an entirely different impact on society; nevertheless how this will impact the society and the differences between the paradigms are unclear. According to this background, this paper presents a comprehensive analysis of direct digital manufacturing from different perspectives in comparison to various traditional manufacturing paradigms. Authors are using a societal viewpoint to see, describe and analyse the subject instead of traditional manufacturing viewpoint. For the better understanding of direct digital manufacturing origins, a classification and historical background about available techniques are described. Furthermore, direct digital manufacturing as a paradigm is analysed and compared with craft production, mass production and mass customisation. Direct digital manufacturing's sustainability aspects related to social, economical and environmental dimensions are gathered and analysed for a better insight of this technique. A detailed case study demonstrates the energy use differences of direct digital manufacturing and mass production in depth. According to the present work, direct digital manufacturing has the possibility of combining the advantages of the other production paradigms and can have a positive impact on sustainable development; yet, there are several challenges to overcome both in technical and sociality aspects. A challenge within the social aspects can be the life style changes which can impact the job market, working environment, waste management and more.}, - isbn = {0959-6526}, - keywords = {Additive manufacturing,Direct digital manufacturing,Manufacturing paradigm,Sustainability}, - file = {/Users/fabio/Zotero/storage/BRV33QCI/Direct digital manufacturing- definition, evolution, and sustainability implications.pdf} -} - -@article{Chen2017, - title = {The Research Status and Development Trend of Additive Manufacturing Technology}, - author = {Chen, Lian and He, Yong and Yang, Yingxin and Niu, Shiwei and Ren, Haitao}, - year = {2017}, - month = apr, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {89}, - number = {9-12}, - pages = {3651--3660}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {0268-3768}, - doi = {10.1007/s00170-016-9335-4}, - isbn = {9781538630136}, - keywords = {additive manufacturing,Additive manufacturing,De,development,development status,manufacturing,Manufacturing technology,process,technology}, - file = {/Users/fabio/Zotero/storage/8F75YGDP/The research status and development trend of additive manufacturing technology.pdf} -} - -@article{Chen2018, - title = {Investigation into the Processability, Recyclability and Crystalline Structure of Selective Laser Sintered {{Polyamide}} 6 in Comparison with {{Polyamide}} 12}, - author = {Chen, Peng and Wu, Hongzhi and Zhu, Wei and Yang, Lei and Li, Zhaoqing and Yan, Chunze and Wen, Shifeng and Shi, Yusheng}, - year = {2018}, - month = aug, - journal = {Polymer Testing}, - volume = {69}, - pages = {366--374}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2018.05.045}, - file = {/Users/fabio/Zotero/storage/58HUWFPH/Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison wit.pdf} -} - -@article{Chen2018a, - title = {Systematical Mechanism of {{Polyamide-12}} Aging and Its Micro-Structural Evolution during Laser Sintering}, - author = {Chen, Peng and Tang, Mingchen and Zhu, Wei and Yang, Lei and Wen, Shifeng and Yan, Chunze and Ji, Zhijun and Nan, Hai and Shi, Yusheng}, - year = {2018}, - month = may, - journal = {Polymer Testing}, - volume = {67}, - pages = {370--379}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2018.03.035} -} - -@article{Chen2018b, - title = {Research on the {{Pricing Model}} of the {{Dual-Channel Reverse Supply Chain Considering Logistics Costs}} and {{Consumers}}' {{Awareness}} of {{Sustainability Based}} on {{Regional Differences}}}, - author = {Chen, Juhong and Wu, Di and Li, Peng}, - year = {2018}, - month = jun, - journal = {Sustainability}, - volume = {10}, - number = {7}, - pages = {2229}, - issn = {2071-1050}, - doi = {10.3390/su10072229} -} - -@article{Chen2019, - title = {Bibliometric Analysis of Theme Evolution and Future Research Trends of the Type a Personality}, - author = {Chen, Hong and Feng, Yan and Li, Shanshan and Zhang, Yingyu and Yang, Xingxing}, - year = {2019}, - month = nov, - journal = {Personality and Individual Differences}, - volume = {150}, - pages = {109507}, - issn = {01918869}, - doi = {10.1016/j.paid.2019.109507} -} - -@article{Chen2019a, - title = {Optimal (Re)Manufacturing Strategies in the Presence of Spontaneous Consumer Returns}, - author = {Chen, Jing and Venkatadri, Uday and Diallo, Claver}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117642}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117642}, - urldate = {2020-05-21}, - abstract = {Remanufacturing is a sustainable development strategy for recovering product value and extending original item lifetimes through collection, inspection, testing, and restoration activities. Remanufacturing activities are typically carried out on products that have been returned by consumers, and the increasingly high flow of products spontaneously returned by customers through marketing initiatives such as Money-Back Guarantee policies, false warranty claims, or end of life returns, is a growing source of products that can be easily remanufactured. In this paper, we develop a novel pricing model for a firm that produces and sells Generation 1 new products in the first period with a promise of Money-Back Guarantee on returned products regardless of reasons. Products returned in the first period can be remanufactured and sold as remanufactured products during the second period, alongside Generation 2 new products. The firm needs to determine the optimal pricing for its two generations of new products and its remanufactured products, based on demand derived from its customers' utility of purchasing either the new or the remanufactured products. We identify the firm's optimal production strategy. Numerical experiments are conducted to illustrate the key managerial insights derived from the model. This paper makes two contributions to the literature: 1) it links customer returns and closed loop supply chain management. Most studies on customer returns do not link remanufacturing with product returns, while most studies on closed loop supply chains assume that the source for remanufactured products is unlimited. 2) It is shown that although remanufacturing returned products may cannibalize new sales, it enhances overall sales, as the firm can differentiate prices for Generation 2 new products and remanufactured products in the second period to attract customers with different valuations on the products.}, - keywords = {Closed loop supply chain,Money-back guarantee,Pricing,Product returns,Refurbished products,Remanufacturing} -} - -@article{Chen2020, - ids = {chen2020b}, - title = {Sustainable Cycles and Management of Plastics: {{A}} Brief Review of {{RCR}} Publications in 2019 and Early 2020}, - author = {Chen, Wei Qiang and Ciacci, Luca and Sun, Ning Ning and Yoshioka, Toshiaki}, - year = {2020}, - journal = {Resources, Conservation and Recycling}, - volume = {159}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104822}, - urldate = {2020-05-08}, - abstract = {Plastics have been playing a vital role in the industrialized economy, resulting in the growing amount of plastic waste and the surging attentions to plastics sustainability challenge. This is well reflected in the growing amount of submissions to and publications in Resources, Conservation, and Recycling on plastics, which made the editorial board decide to edit a Virtual Special Issue (VSI) on the ``sustainable cycles and management of plastics'' in 2018. The call for the VSI has attracted many submissions and twelve were accepted for publication. Together with several other relevant studies, we collected and summarized a total of 26 papers published in RCR mainly during 2019\textendash 2020 in this editorial. These papers mostly apply system approach and cover very wide topics such as material flows analysis and circular economy, life cycle assessment and eco-design, regional and global plastic emissions, and human consumption behavior. The whole collection of them offer a comprehensive view of the plastic waste challenges, as well as insights into achieving sustainability in plastic cycles and management. We believe these papers are helpful for government, industries, and individuals in exploring policy implications for building a more sustainable plastics system.}, - isbn = {2020.104822}, - keywords = {Circular economy,Life cycle assessment,Material flow analysis,Plastics,Recycling,Waste management}, - file = {/Users/fabio/Zotero/storage/V6BLRLSN/full-text.pdf;/Users/fabio/Zotero/storage/BWBZ676D/S0921344920301439.html} -} - -@article{Chen2021, - title = {Sustainable Third-Party Reverse Logistics Provider Selection to Promote Circular Economy Using New Uncertain Interval-Valued Intuitionistic Fuzzy-Projection Model}, - author = {Chen, Lijuan and Duan, Ditao and Mishra, Arunodaya Raj and Alrasheedi, Melfi}, - year = {2021}, - month = may, - journal = {Journal of Enterprise Information Management}, - issn = {1741-0398}, - doi = {10.1108/JEIM-02-2021-0066} -} - -@article{chenAnalyticNetworkProcess2019, - title = {Analytic Network Process: {{Academic}} Insights and Perspectives Analysis}, - author = {Chen, Yong and Jin, Qiuxia and Fang, Hui and Lei, Hui and Hu, Jiarui and Wu, Yanqi and Chen, Jie and Wang, Cheng and Wan, Yuehua}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {1276--1294}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.07.016}, - urldate = {2020-06-18}, - abstract = {Diversity multi-criteria decision-making methods have been developed to address different complex decision-making problems, and the analytic network process has been found to be one of the most effective techniques. There is an increase in the quality and quantity of publications related to the analytic network process. This detailed overview can provide the research status and development characteristics of analytic network process research and will be useful to researchers for future research directions. To achieve these goals, bibliometric techniques were used. In addition, past and present hotspots of analytic network process research were concluded, and future research trends were determined. The bibliometric analysis was carried out from various aspects including countries and regions, institutions, journals, authors, research areas, articles and author keywords based on data harvested from the Web of Science database. There were 1485 analytic network process-related publications retrieved from the Web of Science. The results show that Expert Systems with Applications was the most productive journal publishing articles in analytic network process research (118); its number of publications has decreased dramatically since 2013, while Journal of Cleaner Production has shown an upward trend in recent years and ranks second with 47 publications. The most collaborative country is the United States. Taiwan takes a leading position in analytic network process research with 436 publications (29.36\%), and National Chiao Tung University, which is located in Taiwan, produced the most articles and has gained the highest h-index (28). The major hot topics that employ analytic network process are sustainability, environmental management and supply chain management. These topics may continue to attract more attention in the future.}, - keywords = {Analytic Network Process,Bibliometrics,Environmental management,Hot topics,Supply chain management,Sustainability,Web of science} -} - -@article{chenComprehensiveEvaluationEnvironmental2022, - title = {Comprehensive Evaluation of Environmental and Economic Benefits of Industrial Symbiosis in Industrial Parks}, - author = {Chen, Xinyi and Dong, Miaoxin and Zhang, Long and Luan, Xiaoyu and Cui, Xiaowei and Cui, Zhaojie}, - year = {2022}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {354}, - pages = {131635}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131635}, - urldate = {2022-04-25} -} - -@article{chenCorrigendumIncorporatingArtistic2022, - title = {Corrigendum to ``{{Incorporating}} Artistic Thinking into Sustainability'' [{{J}}. {{Clean}}. {{Prod}}. 198 (2018) 1007\textendash 1012]}, - author = {Chen, Chong Wen}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {341}, - pages = {130873}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130873}, - urldate = {2022-03-07}, - abstract = {The author would like to add supplementary information to figure captions in the Appendix of this paper. These figures summarized students' works of Creativity Techniques courses at Yuan Ze University. While the author thanked all students for presenting their works in the Acknowledgments, it was unclear who created/shot which image. To better clarify the credit and contribution for each student, the author would indicate their names following each figure caption in the Appendix: Fig. A1. Summary of the tissue project and recycling improving project. The former (the upper picture) was conducted by Ching-Yu Hsu, I-Ting Tsai, and Yu-Reng Lu (Edison). The latter (the lower picture) was conducted by Sum-Yee Lai, Sheng-Hung Huang, Yat-Ching Lam, Yung-Sheng Tseng, Ching-Hua Peng, Jung-Chen Chih, Xiang Qiao, and Hui-Hsin Yang. Fig. A2. Summary of the puzzle game project and painting game project. The former (the upper picture) was conducted by Tien-Jen Chen, Tung-Chia Yen, Chiao-Yuan Mo, Chian-You Chiu, and Han-Wen Chan. The latter (the lower picture) was conducted by Ni-Han Wu, Yao-Tsung Hsiao, Yu-Hsuan Yeh, Ting-Hao Huang, Jia-Yun Jhou, Yun-Ru Liu, Yi-Jhen Liu, Ya-Song Chen, Wea-Ching Shih, and Hsuan-Yu Yeh. Fig. A3. Poster design against shark hunting and logging. The former (the left picture) was designed by Chian-You Chiu. The latter (the right picture) was designed by Ting-Yao Chen. Fig. A4. Poster design against climate change and air pollution. The former (the left picture) was designed by Po-Yuan Peng. The latter (the right picture) was designed by Hsiang-Chun Hsu. The author apologizes for any inconvenience caused.} -} - -@article{chenDeterminingCompositionPostconsumer2021, - title = {Determining the Composition of Post-Consumer Flexible Multilayer Plastic Packaging with near-Infrared Spectroscopy}, - author = {Chen, Xiaozheng and Kroell, Nils and Wickel, Jan and Feil, Alexander}, - year = {2021}, - month = mar, - journal = {Waste Management}, - volume = {123}, - pages = {33--41}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2021.01.015}, - urldate = {2021-02-14}, - abstract = {Flexible multilayer plastic packaging (MPP) has grown in popularity in the last years especially in food and medical sectors, and its share in the packaging industry is expected to increase further. Compared to traditional packaging with same functionalities, MPP is characterized by lower energy consumption in production and a reduced packaging weight. So far, the recycling of post-industrial MPP with specific material composition has been achieved by several companies. To our knowledge, all existing MPP recycling processes require a known material combination. In contrast to post-industrial MPP, post-consumer MPP still ends up in incinerators or as low-quality products, mainly because of the lacking ability to sort. This study investigates the detectability of post-consumer MPP with near-infrared spectroscopy, the state-of-the-art technology for sensor-based waste sorting. Firstly, MPP classification with near-infrared spectroscopy was analyzed with clean samples. Subsequently, the effect of waste collection and preprocessing in sorting plants on MPP classification was investigated. For this purpose, clean samples were covered with water and oil and mixed with lightweight packaging waste in a drum sieve. The results show it is possible to classify post-consumer MPP based on near-infrared spectra according to different sorting strategies. For the existing recycling processes which are suitable for post-consumer MPP, the corresponding object-based classification accuracy was found to exceed 96\%.}, - keywords = {Classification,Multilayer plastic packaging,Near-infrared spectroscopy,Plastic recycling,Post-consumer,Sorting} -} - -@article{chenEvaluationCityInnovation2020, - title = {Evaluation of City Innovation Capability Using the {{TOPSIS-based}} Order Relation Method: {{The}} Case of {{Liaoning}} Province, {{China}}}, - author = {Chen, Yang and Li, Weiwei and Yi, Pingtao}, - year = {2020}, - month = nov, - journal = {Technology in Society}, - volume = {63}, - pages = {101330}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101330}, - urldate = {2020-08-09}, - abstract = {Innovation in the knowledge economy is now widely acknowledged as the most important factor accelerating the economic growth at the level of country, region, and city. This paper proposes the TOPSIS-based Order Relation Method (TOPSIS-ORM) to measure and rank the city innovation capability in Liaoning province from 2012 to 2016. For this purpose, an indicator system that includes a set of 12 indicators is first established from the dimensions of innovation input, output, and environment. To determine the indicator weights, the increment and growth rate of each indicator are simultaneously considered in the calculation of the importance of the associated indicator by using dynamic-TOPSIS, and then the ORM is chosen to compute the weighting system. The results show that the innovation capability of most cities in Liaoning province was extremely poor, showing a dramatically downward trend during the studied years. However, Shenyang and Dalian, which have high political hierarchy, achieved a comparatively high innovation performance. Furthermore, cities in southern Liaoning province achieved the highest evaluation values, and the innovation performance of western cities were lagging, which indicates a ``hot spot in the South'' and ``cold spot in the West'' characteristic. To illustrate different dimensions, innovation input, output, and environment showed significant fluctuation. By comparing with different indicators, we find the ratio of internet users (C10) to be the primary driving indicator for promoting innovation capability, whereas the ratio of college students (C12) is the common obstacle to improving innovation performance.}, - keywords = {Comprehensive evaluation,Dynamic-TOPSIS method,Innovation capability,Order relation method} -} - -@article{chenFieldBasedToolpathGeneration2021, - title = {Field-{{Based Toolpath Generation}} for {{3D Printing Continuous Fibre Reinforced Thermoplastic Composites}}}, - author = {Chen, Xiangjia and Fang, Guoxin and Liao, Wei-Hsin and Wang, Charlie C.L.}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - pages = {102470}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102470}, - urldate = {2021-12-01} -} - -@article{chenFilamentRheologicalCharacterization2021, - title = {Filament Rheological Characterization for Fused Filament Fabrication Additive Manufacturing: {{A}} Low-Cost Approach}, - author = {Chen, Jingdong and Smith, Douglas E.}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - volume = {47}, - pages = {102208}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102208}, - urldate = {2021-08-23} -} - -@article{chenFormationRecurrenceMechanism2020, - title = {Formation and Recurrence Mechanism of Residents' Waste Separation Behavior under the Intervention of an Information Interaction}, - author = {Chen, Feiyu and Chen, Hong and Liu, Shuo and Li, Wenbo and Li, Qianwen and Long, Ruyin}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105027}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105027}, - urldate = {2020-07-20}, - abstract = {In the context of socialization, policy guidance and psychological bias play key roles in the recurrence of urban household waste separation behavior. This study explores the recurrence path of urban residents' waste separation behavior from the perspective of behavioral reinforcement, and constructs a reinforcement learning model of the separation behavior, with an interactive intervention of contextual information and biased information in the situation of policy response control. On this basis, this study clarified the realistic conditions and optimal path of urban residents' waste separation behavior recurrence under an interactive intervention involving multiple sources of information through computer simulation. The study found that, in the situation of fixed response validity, the effect of the interactive intervention can be strong, weak or negative, which correspond to optimal, sub-optimal and negative information intervention sets. In the situation of different degrees of response validity, a high degree of response validity leads to the fastest formation and recurrence of separation behavior. High degree of understanding and low degree of support lead to only a high individual learning rate in the initial stage, while low degree of understanding and high degree of support lead to a higher learning rate in the following period time.}, - keywords = {Behavior recurrence,Intervention of information interaction,Response validity,Waste separation behavior} -} - -@article{Cheng2019, - title = {A Circular Economy System for Breaking the Development Dilemma of `Ecological {{Fragility}}\textendash{{Economic}} Poverty' Vicious Circle: {{A CEEPS-SD}} Analysis}, - author = {Cheng, Hao and Dong, Suocheng and Li, Fujia and Yang, Yang and Li, Yu and Li, Zehong}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {381--392}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.014}, - urldate = {2020-03-14}, - abstract = {In nowadays, there are a large number of regions in the world facing with double pressures of ecological fragility and economic poverty. In these regions, if human choose traditional development mode to constantly exploited natural resources for developing economy, the environment will be hardly destroyed or polluted, and finally cause larger economic loss and make poverty more serious. It formed a development dilemma of environmental fragility-economic poverty vicious circle (FPVC). How to break FPVC has been the goal being pursued in the literature worldwide. In this study, we constructed a Circular-Economy-Effect-and-Policy-Simulation-System-Dynamics (CEEPS-SD) model, evaluated the ecological economic comprehensive effects and simulated the future development trends of the circular economy system (CES) which we have planned, constantly tracked and improved in Anding District of Northwest China for 16 years, that is a typical FPVC area. The evaluation and simulation results notably evidenced that the CES had four ecological economic benefits: livestock faeces pollution elimination, water saving, agricultural waste recycling, as well as energy conservation and emission reduction. Through long-term and stable operation, the CES can expand its ecological economic comprehensive benefits constantly and finally eliminate the double pressures of ecological fragility and economic poverty. This study could help large number similar FPVC areas in the world to scientifically build, manage, evaluate, simulate and optimize CES for getting rid of FPVC and achieving sustainable development, which has important theoretical significance and practical value.}, - keywords = {CEEPS-SD model,Circular economy system,Ecological economic effects,FPVC development dilemma,Simulation and improvement} -} - -@article{chenGarbageClassificationSystem2022, - title = {Garbage Classification System Based on Improved {{ShuffleNet}} V2}, - author = {Chen, Zhichao and Yang, Jie and Chen, Lifang and Jiao, Haining}, - year = {2022}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {178}, - pages = {106090}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106090}, - urldate = {2021-12-10} -} - -@article{chengUnpackingExperiencedUtility2021, - title = {Unpacking the Experienced Utility of Sustainable Lifestyle Guiding Policies: {{A}} New Structure and Model}, - author = {Cheng, Xiu and Long, Ruyin and Zhang, Linling and Li, Wenbo}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {486--495}, - publisher = {{Elsevier B.V.}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.01.020}, - urldate = {2021-02-13}, - abstract = {Policy experienced utility is the subjective feeling and value judgment of a target group to a specific policy. It influences the implementation effect of the policy and can even determine the success or failure of the policy. Based on this observation, a five-dimensional structure was proposed and a model was built to measure experienced utility of sustainable lifestyle guiding policies. A numerical simulation was conducted to visually analyze the impact of different parameters on the experienced utility of sustainable lifestyle guiding policies. Results indicated that increasing the subsidy coefficient, emotional saturation factor, social recognition, policy efficacy, and policy sustainability, and reducing the implementation cost, could significantly improve the experienced utility of sustainable lifestyle guiding policies. In particular, the experienced utility of sustainable lifestyle guiding policies became zero when the subsidy coefficient was 1, the emotional saturation factor was 8, the social recognition factor was 4, the policy efficacy was 16, and the policy sustainability was 0.7. Once the cost was greater than 16, the experienced utility of the sustainable lifestyle guiding policy was less than zero. Consequently, recommendations, covering economic means, policy attributes, emotional experience and social recognition, are given to improve the experienced utility of sustainable lifestyle guiding policies.}, - keywords = {Experienced utility,Policy experienced utility,Sustainable lifestyle} -} - -@article{chenHowSafeCircular2023, - title = {How Safe Is the Circular Economy?}, - author = {Chen, Zhuowen and Yildizbasi, Abdullah and Sarkis, Joseph}, - year = {2023}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {188}, - pages = {106649}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106649}, - urldate = {2022-09-18}, - abstract = {This perspective paper focuses on the importance of safety within a circular economy setting. There is also a call for research investigation into the broad variety of safety issues that can appear anywhere across multiple circular economy activities.}, - langid = {english}, - keywords = {Circular economy,Closed-loop supply chains,Safety,Sustainability}, - file = {/Users/fabio/Zotero/storage/94QDC2WC/Chen et al_2023_How safe is the circular economy.pdf;/Users/fabio/Zotero/storage/B9KK4UBE/S0921344922004827.html} -} - -@article{chenLifeCycleAssessment2019, - title = {Life Cycle Assessment of End-of-Life Treatments of Waste Plastics in {{China}}}, - author = {Chen, Yuedong and Cui, Zhaojie and Cui, Xiaowei and Liu, Wei and Wang, Xinlei and Li, XinXin and Li, Shouxiu}, - year = {2019}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {146}, - pages = {348--357}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2019.03.011}, - urldate = {2022-09-13}, - abstract = {As the world's largest producer and consumer of plastics, China is also the largest producer and recycler of waste plastics. It is necessary to explore the environmental impacts of actual end-of-life (EOL) treatments of waste plastics in China. In this study, a life cycle assessment (LCA) was conducted to evaluate the environmental impacts of mechanical recycling of waste plastics as well as incineration and landfilling with municipal solid waste in China. The results indicate the environmental benefits of current EOL treatments of waste plastics in China. Mechanical recycling was a negative and decisive contributor, with a minimum impact on terrestrial acidification potential (-83.4\%) and a maximum impact on global warming potential (-165.8\%). Incineration had negative contributions to 8 of the 12 environmental indicators, and landfilling was a positive contributor to all environmental impacts. Scenarios of treatment pattern, recycling technologies and import policy were set to analyze the potential reduction in environmental impacts of future EOL treatments of waste plastics. Increasing the proportion of mechanical recycling would reduce all environmental impacts, including up to 51.8\% on particulate matter formation potential. Energy conservation and emission reduction in atmospheric pollutants would effectively reduce the environmental impacts of mechanical recycling. Banning waste plastics imports would decrease the transportation distances of waste plastics, thereby reducing the related environmental impacts, most notably a reduction of 84.8\% for marine ecotoxicity potential. This study provides robust references for waste plastics management in China.}, - langid = {english}, - keywords = {Incineration,Landfilling,Life cycle assessment,Mechanical recycling,Waste plastics}, - file = {/Users/fabio/Zotero/storage/K9LKBJLC/Chen et al. - 2019 - Life cycle assessment of end-of-life treatments of.pdf;/Users/fabio/Zotero/storage/NC8HCEM9/S092134491930117X.html} -} - -@article{chenProbabilisticMaterialFlow2023, - title = {Probabilistic Material Flow Analysis of Eight Commodity Plastics in {{China}}: {{Comparison}} between 2017 and 2020}, - shorttitle = {Probabilistic Material Flow Analysis of Eight Commodity Plastics in {{China}}}, - author = {Chen, LiYuan and Liu, WenXin and Yang, Tong and Nowack, Bernd}, - year = {2023}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {191}, - pages = {106880}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.106880}, - urldate = {2023-02-12}, - abstract = {As the largest manufacturing economy, China's strong trade connections to the rest of the world make it a major actor in global plastic flows. Knowledge regarding flows within, into, and out of China is therefore essential, particularly the effects of China's 2017 ban on imported plastic waste. We used probabilistic material flow analysis to model the life-cycles of 8 commodity polymers in China in 2017 and 2020. We considered 9 product sectors, 33 product categories, and 6 disposal options. China produced and imported a large amount of primary plastics while exporting numerous semi-finished and finished plastic products. The largest application of plastics is packaging, followed by textiles, with PP and PET having the largest consumption. Waste plastics were mainly incinerated and landfilled, and their recycling rates were high. This study provides separate analyses for each polymer, makes comparisons with Europe, and lays the foundation for plastic management in China.}, - langid = {english}, - keywords = {China,Comparison,Import waste ban,Plastics,Probabilistic material flow analysis}, - file = {/Users/fabio/Zotero/storage/RL5AATWB/Chen et al_2023_Probabilistic material flow analysis of eight commodity plastics in China.pdf;/Users/fabio/Zotero/storage/JM6EMYQA/S0921344923000174.html} -} - -@article{chenUncertaintyCausedLife2021, - title = {Uncertainty Caused by Life Cycle Impact Assessment Methods: {{Case}} Studies in Process-Based {{LCI}} Databases}, - author = {Chen, Xiaoju and Matthews, H. Scott and Griffin, W. Michael}, - year = {2021}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {172}, - pages = {105678}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105678}, - urldate = {2021-05-31}, - file = {/Users/fabio/Zotero/storage/RIYFI6EV/full-text.pdf} -} - -@article{chenValuingRegulatingServices2022, - title = {Valuing Regulating Services of Urban Ecosystems towards More Comprehensive House Pricing}, - author = {Chen, Yu and Liu, Gengyuan and Yang, Qing and Li, Hui and Deng, Xiaoya and Ulgiati, Sergio}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {357}, - pages = {132030}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.132030}, - urldate = {2022-05-23} -} - -@article{chenWhatMedicalWaste2021, - title = {What Medical Waste Management System May Cope {{With COVID-19}} Pandemic: {{Lessons}} from {{Wuhan}}}, - author = {Chen, Chang and Chen, Jiaao and Fang, Ran and Ye, Fan and Yang, Zhenglun and Wang, Zhen and Shi, Feng and Tan, Wenfeng}, - year = {2021}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {170}, - pages = {105600}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105600}, - urldate = {2021-04-29}, - abstract = {The global pandemic caused by the 2019 coronavirus (COVID-19) has led to a dramatic increase in medical waste worldwide. This tremendous increase in medical waste is an important transmission medium for the virus and thus poses new and serious challenges to urban medical waste management. This study investigates the response of medical waste management to the COVID-19 pandemic and subsequent changes in Wuhan City based on the most detailed data available, including waste generation, storage, transportation, and disposal. The results show that despite a 5-fold increase in the demand for daily medical waste disposal in the peak period, the quick responses in the storage, transportation, and disposal sectors during the pandemic ensured that all medical waste was disposed of within 24 hours of generation. Furthermore, this paper discusses medical waste management during future emergencies in Wuhan. The ability of the medical waste management system in Wuhan to successfully cope with the rapid increase in medical waste caused by major public health emergencies has important implications for other cities suffering from the pandemic and demonstrates the need to establish resilient medical emergency systems in urban areas.}, - keywords = {COVID-19,Emergency management,Health risk,Medical waste,Public health}, - file = {/Users/fabio/Zotero/storage/63KJB2WB/full-text.pdf} -} - -@article{Chertow2000, - title = {Industrial {{Symbiosis}}: {{Literature}} and {{Taxonomy}}}, - author = {Chertow, Marian R}, - year = {2000}, - month = nov, - journal = {Annual Review of Energy and the Environment}, - volume = {25}, - number = {1}, - pages = {313--337}, - issn = {1056-3466}, - doi = {10.1146/annurev.energy.25.1.313}, - keywords = {and,and energy through local,as part of the,demands resolute attention to,eco-industrial parks,ecology,emerging field of industrial,industrial ecology,materials exchange,s abstract industrial symbiosis,sustainable development,the flow of materials}, - file = {/Users/fabio/Zotero/storage/IFPZS464/INDUSTRIAL SYMBIOSIS- Literature and Taxonomy.pdf} -} - -@article{Chertow2007, - title = {``{{Uncovering}}'' {{Industrial Symbiosis}}}, - author = {Chertow, Marian R.}, - year = {2008}, - month = oct, - journal = {Journal of Industrial Ecology}, - volume = {11}, - number = {1}, - pages = {11--30}, - issn = {10881980}, - doi = {10.1162/jiec.2007.1110}, - abstract = {Since 1989, efforts to understand the nature of interfirm resource sharing in the form of industrial symbiosis and to replicate in a deliberate way what was largely self-organizing in Kalundborg, Denmark have followed many paths, some with much success and some with very little. This article provides a historical view of the motivations and means for pursuing industrial symbiosis - defined to include physical exchanges of materials, energy, water, and by-products among diversified clusters of firms. It finds that "uncovering" existing symbioses has led to more sustainable industrial development than attempts to design and build eco-industrial parks incorporating physical exchanges. By examining 15 proposed projects brought to national and international attention by the U.S. President's Council on Sustainable Development beginning in the early 1990s, and contrasting these with another 12 projects observed to share more elements of self-organization, recommendations are offered to stimulate the identification and uncovering of already existing "kernels" of symbiosis. In addition, policies and practices are suggested to identify early-stage precursors of potentially larger symbioses that can be nurtured and developed further. The article concludes that environmentally and economically desirable symbiotic exchanges are all around us and now we must shift our gaze to find and foster them. \textcopyright{} 2007 by the Massachusetts Institute of Technology and Yale University.}, - keywords = {By-product synergy,Eco-industrial development,Eco-industrial parks,Industrial ecology,Industrial ecosystems,Industrial symbiosis}, - file = {/Users/fabio/Zotero/storage/JIVD8T26/Uncovering Industrial symbiosis.pdf} -} - -@article{Chertow2021, - title = {Tracking the Diffusion of Industrial Symbiosis Scholarship Using Bibliometrics: {{Comparing}} across {{Web}} of {{Science}}, {{Scopus}}, and {{Google Scholar}}}, - author = {Chertow, Marian R. and Kanaoka, Koichi S. and Park, Jooyoung}, - year = {2021}, - month = aug, - journal = {Journal of Industrial Ecology}, - volume = {25}, - number = {4}, - pages = {913--931}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {15309290}, - doi = {10.1111/jiec.13099}, - urldate = {2022-02-17}, - abstract = {Previous bibliometric analyses of industrial symbiosis (IS) research have focused on a limited body of literature owing to the scope of keyword searches or limitations of library databases. This study seeks to apply bibliometrics to explore broader, epistemological questions, particularly about the structure and geospatial development of IS as a sub-field of industrial ecology. We also evaluate the benefits of using Google Scholar, in addition to the conventional databases Web of Science (WoS) and Scopus, for better understanding academic domains. By using WoS and Scopus, 805 articles on IS that met our criteria were identified, published in 212 journals from 1995 through 2018. On average, the cumulative number of relevant articles grew at an exponential rate of 18\% per year\textemdash more than double the estimated growth of global scientific output. We observed the largest increases in articles that: (1) model the material and energy flows in IS clusters; (2) propose strategies and ideas for implementing symbiosis; and (3) evaluate the performance of IS networks. By the end of 2018, 54 countries were featured in IS articles retrieved from WoS and Scopus, with China as the single most studied country. The analysis of Google Scholar suggested that it can capture more IS articles than the conventional databases owing to its unique characteristic of searching the entire text of documents rather than solely their metadata as with WoS and Scopus. Google Scholar revealed IS discourse from additional countries and disciplines previously omitted, enabling a more acute view of its patterns of diffusion.}, - keywords = {bibliometrics,eco-industrial,Google Scholar,industrial ecology,industrial ecosystem,industrial symbiosis}, - file = {/Users/fabio/Zotero/storage/UMKVCAZI/full-text.pdf} -} - -@article{cherylGoverningProgressInternetofthings2021, - title = {Governing the Progress of Internet-of-Things: {{Ambivalence}} in the Quest of Technology Exploitation and User Rights Protection}, - author = {Cheryl, Barr-Kumarakulasinghe and Ng, Boon-Kwee and Wong, Chan-Yuan}, - year = {2021}, - month = feb, - journal = {Technology in Society}, - volume = {64}, - pages = {101463}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101463}, - urldate = {2020-12-14}, - file = {/Users/fabio/Zotero/storage/IYVM95ZZ/full-text.pdf} -} - -@article{Chesser2019, - title = {Extrusion {{Control}} for {{High Quality Printing}} on {{Big Area Additive Manufacturing}} ({{BAAM}}) {{Systems}}}, - author = {Chesser, Phillip and Post, Brian and Roschli, Alex and Carnal, Charles and Lind, Randall and Borish, Michael and Love, Lonnie}, - year = {2019}, - month = may, - journal = {Additive Manufacturing}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.05.020} -} - -@article{Cheung2018, - title = {University Halls Plastics Recycling: A Blended Intervention Study}, - author = {Cheung, Tsz Yan and Fok, Lincoln and Cheang, Chi-Chiu and Yeung, Chi Ho and So, Wing-Mui Winnie and Chow, Cheuk-Fai}, - year = {2018}, - month = sep, - journal = {International Journal of Sustainability in Higher Education}, - volume = {19}, - number = {6}, - pages = {1038--1052}, - issn = {1467-6370}, - doi = {10.1108/IJSHE-10-2017-0175} -} - -@book{Chi2000, - title = {Journal of Electronic Commerce Research.}, - author = {Chi, {\relax Robert}.}, - year = {2000}, - publisher = {{R. Chi}}, - issn = {1526-6133}, - abstract = {Some issues called special issues with distinctive titles. Title from issue table of contents (CSULB site, viewed Apr. 30, 2002).} -} - -@article{Chia2015, - title = {Recent Advances in {{3D}} Printing of Biomaterials}, - author = {Chia, Helena N and Wu, Benjamin M}, - year = {2015}, - journal = {Journal of Biological Engineering}, - volume = {9}, - number = {1}, - pages = {4}, - issn = {17541611}, - doi = {10.1186/s13036-015-0001-4}, - abstract = {3D Printing promises to produce complex biomedical devices according to computer design using patient-specific anatomical data. Since its initial use as pre-surgical visualization models and tooling molds, 3D Printing has slowly evolved to create one-of-a-kind devices, implants, scaffolds for tissue engineering, diagnostic platforms, and drug delivery systems. Fueled by the recent explosion in public interest and access to affordable printers, there is renewed interest to combine stem cells with custom 3D scaffolds for personalized regenerative medicine. Before 3D Printing can be used routinely for the regeneration of complex tissues (e.g. bone, cartilage, muscles, vessels, nerves in the craniomaxillofacial complex), and complex organs with intricate 3D microarchitecture (e.g. liver, lymphoid organs), several technological limitations must be addressed. In this review, the major materials and technology advances within the last five years for each of the common 3D Printing technologies (Three Dimensional Printing, Fused Deposition Modeling, Selective Laser Sintering, Stereolithography, and 3D Plotting/Direct-Write/Bioprinting) are described. Examples are highlighted to illustrate progress of each technology in tissue engineering, and key limitations are identified to motivate future research and advance this fascinating field of advanced manufacturing.}, - isbn = {9781617797637}, - pmid = {22692615}, - keywords = {3D plotting,3D Printing,Bioprinting,Computer-aided tissue engineering,Fused deposition modeling,Selective laser sintering,Stereolithography} -} - -@article{ChiappettaJabbour2019, - title = {Who Is in Charge? {{A}} Review and a Research Agenda on the `Human Side' of the Circular Economy}, - author = {Chiappetta Jabbour, Charbel Jose and Sarkis, Joseph and {Lopes de Sousa Jabbour}, Ana Beatriz and Scott Renwick, Douglas William and Singh, Sanjay Kumar and Grebinevych, Oksana and Kruglianskas, Isak and Filho, Moacir Godinho}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {222}, - pages = {793--801}, - publisher = {{Elsevier Ltd}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2019.03.038}, - abstract = {The adoption of the circular economy (CE) at the firm level has rarely intersected with human resource management (HRM) \textendash{} here called `the human side of organizations' \textendash{} and these two fields remain largely separate areas of knowledge. While the literature on the CE is expanding, discussion of its implementation in organizations is, so far, rare, along with exploration of the necessary alignment of the CE with green human resource management (GHRM). In this article, we extend the state-of-the-art literature on CE business models through the inclusion of the `human side' of such issues. This goal is met by offering an original integrative GHRM framework for organizations developing CE. The theoretical lenses of stakeholders' theory and the resource based view (RBV) form the foundation of this framework, which represents a `middle range theory'. We underline the practices and dimensions of the links between GHRM and the `ReSOLVE' CE model. Through an exploration of this integrative framework, we propose a future research agenda along with original research propositions. Furthermore, the middle-range integrated theoretical framework we propose can serve both academics and practitioners in developing understanding of the human resource management (HRM) and change management aspects of the CE.}, - file = {/Users/fabio/Zotero/storage/IFT77JWE/Who is in charge A review and a research agenda on the ‘human side’ of the circular economy.pdf} -} - -@article{chienEvaluatingSocialEcological2021, - title = {Evaluating Social\textendash Ecological Fit in Urban Stream Management: {{The}} Role of Governing Institutions in Sustainable Urban Ecosystem Service Provision}, - author = {Chien, Herlin and Saito, Osamu}, - year = {2021}, - month = jun, - journal = {Ecosystem Services}, - volume = {49}, - pages = {101285}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101285}, - urldate = {2021-05-03} -} - -@article{chiffreInondationsNancyAnciennes2014, - title = {{Les inondations \`a Nancy \textendash{} Anciennes et nouvelles probl\'ematiques}}, - author = {Chiffre, Emmanuel and Mathis, Denis and Mathis, Anne}, - year = {2014}, - month = dec, - journal = {D\'eveloppement durable et territoires. \'Economie, g\'eographie, politique, droit, sociologie}, - number = {Vol. 5, n\textdegree 3}, - publisher = {{R\'eseau \guillemotleft{} D\'eveloppement durable et territoires fragiles \guillemotright}}, - issn = {1772-9971}, - urldate = {2023-03-02}, - abstract = {Le 21 mai 2012, l'agglom\'eration nanc\'eienne connaissait un \'episode pluvieux exceptionnel avec comme cons\'equence une inondation par ruissellement. Pourtant, la ville avait r\'ealis\'e d'importants travaux pour la mise hors d'eau du quartier compris entre la Meurthe et le Canal de la Marne au Rhin. Ce quartier industriel et ouvrier construit dans le lit majeur de la rivi\`ere \'etait r\'eguli\`erement touch\'e par les crues, une vuln\'erabilit\'e qui explique son d\'ep\'erissement. La m\'emoire autant que la vuln\'erabilit\'e au risque d'inondation ont pes\'e sur l'avenir du quartier. Depuis 1986, les travaux d'am\'enagements et de protection ont permis de r\'enover cet espace et de r\'econcilier les nanc\'eiens avec leur rivi\`ere. Le quartier forme d\'esormais un front d'eau redynamis\'e et un mod\`ele pour l'ensemble de l'agglom\'eration.}, - langid = {french}, - keywords = {21 mai 2012,front d'eau,inondations,Meurthe,Nancy,r\'enovation urbaine,vuln\'erabilit\'e}, - file = {/Users/fabio/Zotero/storage/MG5F5UW9/Chiffre et al_2014_Les inondations à Nancy – Anciennes et nouvelles problématiques.pdf} -} - -@article{Childs1994, - title = {Linear and {{Geometric Accuracies}} from {{Layer Manufacturing}}}, - author = {Childs, T.H.C. and Juster, N.P.}, - year = {1994}, - month = jan, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {43}, - number = {1}, - pages = {163--166}, - issn = {00078506}, - doi = {10.1016/S0007-8506(07)62187-8}, - urldate = {2014-02-17}, - keywords = {concurrent engineering,inspection,manufacturing processes}, - file = {/Users/fabio/Zotero/storage/WV8QSP53/Linear and Geometric Accuracies from Layer Manufacturing.pdf} -} - -@article{Chim2006, - title = {A Comparative Analysis of Scaffold Material Modifications for Load-Bearing Applications in Bone Tissue Engineering.}, - author = {Chim, H and Hutmacher, D W and Chou, a M and Oliveira, a L and Reis, R L and Lim, T C and Schantz, J-T}, - year = {2006}, - month = oct, - journal = {International journal of oral and maxillofacial surgery}, - volume = {35}, - number = {10}, - eprint = {16762529}, - eprinttype = {pubmed}, - pages = {928--34}, - issn = {0901-5027}, - doi = {10.1016/j.ijom.2006.03.024}, - urldate = {2014-01-31}, - abstract = {To facilitate optimal application of appropriate scaffold architectures for clinical trials, there is a need to compare different scaffold modifications under similar experimental conditions. In this study was assessed the effectiveness of poly-e-caprolactone (PCL) scaffolds fabricated by fused deposition modelling (FDM), with varying material modifications, for the purposes of bone tissue engineering. The incorporation of hydroxyapatite (HA) in PCL scaffolds, as well as precalcification through immersion in a simulated body fluid (SBF) to produce a biomimetic apatite coating on the scaffolds, was assessed. A series of in vitro studies spanning 3 weeks as well as in vivo studies utilizing a subcutaneous nude mouse model were carried out. PCL and HA-PCL scaffolds demonstrated increasing tissue growth extending throughout the implants, as well as superior mechanical strength and mineralization, as evidenced by X-ray imaging after 14 weeks in vivo. No significant difference was found between PCL and HA-PCL scaffolds. Precalcification with SBF did not result in increased osteoconductivity and cell proliferation as previously reported. Conversely, tensile forces exerted by tissue sheets bridging adjacent struts of the PCL scaffold caused flaking of the apatite coating that resulted in impaired cell attachment, growth and mineralization. The results suggest that scaffolds fabricated by FDM may have load-bearing applications.}, - pmid = {16762529}, - keywords = {Animal,Animals,Biocompatible,Biocompatible: chemistry,Biocompatible: therapeutic use,Bone and Bones,Bone and Bones: chemistry,Bone Substitutes,Bone Substitutes: chemistry,Bone Substitutes: therapeutic use,Cell Culture Techniques,Cell Culture Techniques: methods,Cell Separation,Cell Separation: methods,Coated Materials,Durapatite,Durapatite: chemistry,Durapatite: therapeutic use,Elasticity,Humans,Mice,Models,Nude,Osteoblasts,Osteoblasts: transplantation,Polyesters,Polyesters: chemistry,Polyesters: therapeutic use,Tissue Engineering,Tissue Engineering: methods,Weight-Bearing}, - file = {/Users/fabio/Zotero/storage/7L96YIF5/Chim et al. - 2006 - A comparative analysis of scaffold material modifications for load-bearing applications in bone tissue engineering.pdf} -} - -@article{Chin2013, - title = {Educational Living Labs: {{A}} Novel Internet-of-Things Based Approach to Teaching and Research}, - author = {Chin, Jeannette and Callaghan, Vic}, - year = {2013}, - journal = {Proceedings - 9th International Conference on Intelligent Environments, IE 2013}, - number = {June}, - pages = {92--99}, - doi = {10.1109/IE.2013.48}, - abstract = {This paper explores some a novel approaches to harnessing the Internet-of-Things (IoT) as a teaching and research vehicle in education. For teaching we argue that the Internet-of-Things provides a highly motivating topic to capture students' imaginations, and a perfect platform for teaching computer science. In addition, we explain the potential for entire campuses or buildings to be constructed from Internet-of-Things technologies and the potential for this infrastructure to act as a teaching platform. This proposition is perfectly captured by the axiom 'The college building (or campus) is the lab'. This philosophy is part of a wider movement that started in the EU, called Living Labs. In achieving these aims, our work seeks to combine a number of concepts, first we utilise the Internet-of-Things, second we incorporate Living Labs ideas, third we harness the iCampus vision, forth we use the 'Smart Box' concept and finally we implement the Pervasive-interactive-Programming (PiP) paradigm. We contend this approach can be used in various mixes to produce highly motivating and effective educational environments. We illustrate this work by describing the application of these ideas to a real-world venture, the Harlow UTC (in the UK). The main focus of this paper concerns the use of PiP, together with the Internet-of-Things, to teach elementary programming skills. In in support of this we present results of an evaluation of PiP with 18 participants (students and staff) of varied age and gender. The main conclusions of these evaluations were that PiP enabled students and staff, with diverse backgrounds, to quickly master the programming skills involved. The paper concludes by describing our future plans for this work. \textcopyright{} 2013 IEEE.}, - keywords = {Cloud-of-Things,Education,End-User Programming,Intelligent Campus,Intelligent Environments,Internet-of-Things,Living Labs,Smart Boxes}, - file = {/Users/fabio/Zotero/storage/CQK7M75N/Educational Living Labs; A novel Internet-of-Things based Approach to Teaching and Research.pdf} -} - -@article{ChinAng2006, - title = {Investigation of the Mechanical Properties and Porosity Relationships in Fused Deposition Modelling-fabricated Porous Structures}, - author = {Chin Ang, Ker and Fai Leong, Kah and Kai Chua, Chee and Chandrasekaran, Margam}, - year = {2006}, - month = mar, - journal = {Rapid Prototyping Journal}, - volume = {12}, - number = {2}, - pages = {100--105}, - issn = {1355-2546}, - doi = {10.1108/13552540610652447}, - urldate = {2015-03-17}, - keywords = {modelling,paper type research paper,porous materials,rapid prototypes}, - file = {/Users/fabio/Zotero/storage/AI5J8J26/Chin Ang et al. - 2006 - Investigation of the mechanical properties and porosity relationships in fused deposition modelling‐fabricate.pdf} -} - -@article{chinPlasticCircularEconomy2022, - title = {Plastic {{Circular Economy Framework}} Using {{Hybrid Machine Learning}} and {{Pinch Analysis}}}, - author = {Chin, Hon Huin and Varbanov, Petar Sabev and You, Fengqi and Sher, Farooq and Kleme{\v s}, Ji{\v r}{\'i} Jarom{\'i}r}, - year = {2022}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {184}, - pages = {106387}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106387}, - urldate = {2022-05-29} -} - -@article{chistovOpenEcoinnovationBibliometric2021, - title = {Open Eco-Innovation: {{A}} Bibliometric Review of Emerging Research}, - author = {Chistov, Valery and Aramburu, Nekane and {Carrillo-Hermosilla}, Javier}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {311}, - pages = {127627}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127627}, - urldate = {2021-06-10} -} - -@article{Chiu2020, - title = {On General Principles at the Sustainability Science-Policy Interface}, - author = {Chiu, A. S.F. and Aviso, K. B. and Tan, R. R.}, - year = {2020}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {158}, - pages = {104828}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104828}, - urldate = {2020-05-08}, - file = {/Users/fabio/Zotero/storage/J7SS9NBQ/full-text.pdf} -} - -@article{Chiulan2017, - title = {Recent {{Advances}} in {{3D Printing}} of {{Aliphatic Polyesters}}}, - author = {Chiulan, Ioana and Frone, Adriana and Brandabur, C{\u a}lin and Panaitescu, Denis}, - year = {2017}, - journal = {Bioengineering}, - volume = {5}, - number = {1}, - eprint = {1011.1669v3}, - pages = {2}, - issn = {2306-5354}, - doi = {10.3390/bioengineering5010002}, - abstract = {3D Printing promises to produce complex biomedical devices according to computer design using patient-specific anatomical data. Since its initial use as pre-surgical visualization models and tooling molds, 3D Printing has slowly evolved to create one-of-a-kind devices, implants, scaffolds for tissue engineering, diagnostic platforms, and drug delivery systems. Fueled by the recent explosion in public interest and access to affordable printers, there is renewed interest to combine stem cells with custom 3D scaffolds for personalized regenerative medicine. Before 3D Printing can be used routinely for the regeneration of complex tissues (e.g. bone, cartilage, muscles, vessels, nerves in the craniomaxillofacial complex), and complex organs with intricate 3D microarchitecture (e.g. liver, lymphoid organs), several technological limitations must be addressed. In this review, the major materials and technology advances within the last five years for each of the common 3D Printing technologies (Three Dimensional Printing, Fused Deposition Modeling, Selective Laser Sintering, Stereolithography, and 3D Plotting/Direct-Write/Bioprinting) are described. Examples are highlighted to illustrate progress of each technology in tissue engineering, and key limitations are identified to motivate future research and advance this fascinating field of advanced manufacturing.}, - archiveprefix = {arxiv}, - isbn = {2306-5354}, - pmid = {25093879}, - keywords = {3d printing,acid,aliphatic polyesters,polyhydroxyalkanoates}, - file = {/Users/fabio/Zotero/storage/GG547C8Y/Recent advances in 3D printing of aliphatic polyesters.pdf} -} - -@article{Chofreh2019, - title = {The Imperative and Research Directions of Sustainable Project Management}, - author = {Chofreh, Abdoulmohammad Gholamzadeh and Goni, Feybi Ariani and Malik, Muhammad Noman and Khan, Huma Hayat and Kleme{\v s}, Ji{\v r}{\'i} Jarom{\'i}r}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117810}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117810}, - urldate = {2020-05-21}, - abstract = {There have been a considerable number of studies that underscored the need to integrate sustainability into the sustainable project management concept. However, there is a limited study that examines the significance of the concept and its future research directions. The present study aimed to investigate the imperative of the concept and identify a number of potential research themes. The research methodology used in this study is a narrative review that relies on literature analysis in the fields of sustainability, project management, and sustainable project management. The results provide numerous research topics that have been studied by academics, and further studies are required to advance the development of sustainable project management research. The research findings contribute to academics in providing research directions in order to observe new research themes. In a practical perspective, this study can assist practitioners in understanding the importance of embedding environmental, social, and economic aspects of sustainability into the process of managing projects.}, - keywords = {Project management,Research directions,Research imperative,Sustainability} -} - -@article{Choi2011, - title = {Development of a Mobile Fused Deposition Modeling System with Enhanced Manufacturing Flexibility}, - author = {Choi, Jae-Won and Medina, Francisco and Kim, Chiyen and Espalin, David and Rodriguez, David and Stucker, Brent and Wicker, Ryan}, - year = {2011}, - month = mar, - journal = {Journal of Materials Processing Technology}, - volume = {211}, - number = {3}, - pages = {424--432}, - publisher = {{Elsevier B.V.}}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2010.10.019}, - urldate = {2013-03-08}, - keywords = {additive manufacturing,am,fdm,fused deposition modeling,manufacturing flexibility}, - file = {/Users/fabio/Zotero/storage/92L3RT9M/Choi et al. - 2011 - Development of a mobile fused deposition modeling system with enhanced manufacturing flexibility.pdf} -} - -@article{Choi2014, - title = {Crystalline Silicon Photovoltaic Recycling Planning: Macro and Micro Perspectives}, - author = {Choi, Jun-Ki and Fthenakis, Vasilis}, - year = {2014}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {66}, - pages = {443--449}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2013.11.022} -} - -@article{Choi2020, - title = {A {{Need}} for {{Co-Evolution}} between {{Technological Innovations}} and {{Social Innovations}}}, - author = {Choi, Pae Kun}, - year = {2020}, - month = jul, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {6}, - number = {3}, - pages = {54}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2199-8531}, - doi = {10.3390/joitmc6030054}, - urldate = {2020-08-09}, - abstract = {The 4th industrial revolution must be approached from the perspective of industrial ecosystem in order to lead to industrial reorganization facing after deindustrialization. This is because, as the characteristics of agriculture and manufacturing differ, the basic characteristics of industries related to the 4th industrial revolution differ from those of manufacturing. Differences in the way agriculture and manufacturing value is created require differences in human type, social systems, and even distribution system. That is, just as ecosystems focus on the interrelationship of organisms and their relationship with the physical environment, the industrial ecosystems to be accompanied by the 4th industrial revolution require new human beings to live in the new industrial ecosystem and new systems to support the new industrial ecosystem, with new technologies in the related fields. This paper will show that the industrial ecosystem required by the 4th industrial revolution calls for Homo empathicus different from Homo economicus of industrial society, a reciprocal economy different from the capitalist economy, and an autonomous democracy different from free democracy.}, - keywords = {autonomous democracy,basic income,data sharing,digital ecosystem,Homo empathicus,industrial ecosystem,reciprocal economy,social innovations}, - file = {/Users/fabio/Zotero/storage/J52Z5KRN/full-text.pdf} -} - -@article{choiCircularSupplyChain2021, - title = {Circular Supply Chain Management with Large Scale Group Decision Making in the Big Data Era: {{The}} Macro-Micro Model}, - author = {Choi, Tsan-Ming and Chen, Yue}, - year = {2021}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {169}, - pages = {120791}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120791}, - urldate = {2021-04-29} -} - -@article{choiRoleLocalActors2020, - title = {The Role of Local Actors in Spatial Agglomeration of Innovative Activities: Evidence from {{3D}} Printing}, - author = {Choi, Jongmin}, - year = {2020}, - month = may, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--13}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2020.1769839}, - urldate = {2020-05-27}, - abstract = {The regional success in relation to the development of emerging technology is not automatically determined by pre-existing conditions and activities. Relatively visible actors, such as universities...}, - keywords = {emerging technology,Regional competitive advantage,spatial agglomeration} -} - -@article{choiSmartHomeInternet2021, - title = {Smart Home and Internet of Things: {{A}} Bibliometic Study}, - author = {Choi, Wonyoung and Kim, Jisu and Lee, SangEun and Park, Eunil}, - year = {2021}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {301}, - pages = {126908}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126908}, - urldate = {2021-04-29}, - abstract = {Background: The Internet of Things provides access to information anywhere at any time on any device and has changed all domains by addressing a variety of problems in society through real-time information from interconnected devices. Among these domains, smart homes are one of the most important areas that have been significantly affected by the Internet of Things. Smart homes connected to the IoT have led to the creation of the new domain, namely, smart home-Internet of Things. Scope and approach: A bibliometric approach was followed in this study to analyze research articles in the smart home-Internet of Things area, by extracting papers presented at notable international conferences and published in respected journals. This study collects 2339 articles from the SCOPUS database, which were published from 2015 to 2019. Findings: Publication trends, key areas, influential articles, publication venues, and several notable topics related to smart home-Internet of Things were explored. Moreover, this study confirms that there are notable improvements and developments in the area of smart home-Internet of Things, as well as smart home and Internet of Things. Implications: The findings presented herein offer notable insights and emphasize learning points for future directions of smart home-Internet of Things. Moreover, both key trends and knowledge domains of smart home-Internet of Things were presented.} -} - -@article{Cholleti2018, - title = {{{ABS Nano Composite Materials}} in {{Additive Manufacturing}}}, - author = {Cholleti, Eshwar Reddy and Gibson, Ian}, - year = {2018}, - month = dec, - journal = {IOP Conference Series: Materials Science and Engineering}, - volume = {455}, - pages = {012038}, - issn = {1757-899X}, - doi = {10.1088/1757-899X/455/1/012038} -} - -@article{Chong2015, - title = {Cradle to {{Cradle}} \textregistered{} {{Design}} for {{3D Printing}}}, - author = {Chong, Siewhui and Chiu, Hsien-Lung and Liao, Ying-Chih and Hung, Shuo-Ting and Pan, Guan-Ting}, - year = {2015}, - journal = {Chemical Engineering Transactions}, - volume = {45}, - pages = {1669--1674}, - doi = {10.3303/CET1545279}, - isbn = {9788895608365}, - keywords = {Meth4recycling}, - file = {/Users/fabio/Zotero/storage/HIT42675/Chong et al. - 2015 - Cradle to Cradle ® Design for 3D Printing.pdf} -} - -@article{Chong2017, - title = {Physical {{Characterization}} and {{Pre-assessment}} of {{Recycled High-Density Polyethylene}} as {{3D Printing Material}}}, - author = {Chong, Siewhui and Pan, Guan-Ting and Khalid, Mohammad and Yang, Thomas C.K. and Hung, Shuo-Ting and Huang, Chao-Ming}, - year = {2017}, - month = jun, - journal = {Journal of Polymers and the Environment}, - volume = {25}, - number = {2}, - pages = {136--145}, - publisher = {{Springer US}}, - issn = {1566-2543}, - doi = {10.1007/s10924-016-0793-4}, - abstract = {3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.}, - keywords = {3D printing,Filament,HDPE,Plastic,Polymer,Recycling}, - file = {/Users/fabio/Zotero/storage/P62JES7I/physical characterization and pre-assessment of recycled high-density polyethylene as 3d printing material.pdf} -} - -@article{Chong2018, - title = {A Review of Digital Manufacturing-Based Hybrid Additive Manufacturing Processes}, - author = {Chong, Li and Ramakrishna, Seeram and Singh, Sunpreet}, - year = {2018}, - month = mar, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {95}, - number = {5-8}, - pages = {2281--2300}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {0268-3768}, - doi = {10.1007/s00170-017-1345-3}, - abstract = {\textcopyright{} 2017 Springer-Verlag London Ltd., part of Springer Nature From Germany's Industry 4.0 mission to Made in China 2025 and Make in India mission to British Factory of the Future in 2050, digital manufacturing (DM) is promoting in the world's major industrial countries as a technology foundation of the future manufacturing. At the same time, in the different segments of the DM realm, different forms of information technologies (IT) are flourishing such as the following: computer-aided manufacturing, robotics control in manufacturing, and process simulation. This paper is aimed to review the latest initiatives of DM in the leading universities and major industrial countries. Along with, a critical literature review of various initiatives in the area of DM-assisted hybrid additive manufacturing (DM-HAM) has also been carried out. DM-HAM seems to be very promising for next generation multi-operational manufacturing as it is time saving and economical. The highlights of this review will provide a guide for the upcoming research activities in the area of DM-HAM.}, - keywords = {Digital manufacturing,Hybrid additive manufacturing,Information technology,Machining,Simulation,Welding}, - file = {/Users/fabio/Zotero/storage/JPVKRMNL/A review of digital manufacturing-based hybrid additive manufacturing processes.pdf} -} - -@article{Choo2019, - title = {Heat Retention Modeling of Large Area Additive Manufacturing}, - author = {Choo, Kyosung and Friedrich, Brian and Daugherty, Tim and Schmidt, Austin and Patterson, Clark and Abraham, Martin A. and Conner, Brett and Rogers, Kirk and Cortes, Pedro and MacDonald, Eric}, - year = {2019}, - month = aug, - journal = {Additive Manufacturing}, - volume = {28}, - pages = {325--332}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.04.014} -} - -@article{choongGlobalRise3D2020, - title = {The Global Rise of {{3D}} Printing during the {{COVID-19}} Pandemic}, - author = {Choong, Yu Ying Clarrisa and Tan, Hong Wei and Patel, Deven C. and Choong, Wan Ting Natalie and Chen, Chun-Hsien and Low, Hong Yee and Tan, Ming Jen and Patel, Chandrakant D. and Chua, Chee Kai}, - year = {2020}, - month = sep, - journal = {Nature Reviews Materials}, - volume = {5}, - number = {9}, - pages = {637--639}, - publisher = {{Nature Publishing Group}}, - issn = {2058-8437}, - doi = {10.1038/s41578-020-00234-3}, - urldate = {2023-06-27}, - abstract = {3D printing enables on-demand solutions for a wide spectrum of needs ranging from personal protection equipment to medical devices and isolation wards. This versatile technology is suited to address supply\textendash demand imbalances caused by socio-economic trends and disruptions in supply chains.}, - copyright = {2020 Springer Nature Limited}, - langid = {english}, - keywords = {Business and industry,Health care,Mechanical engineering,SARS-CoV-2,Scientific community}, - file = {/Users/fabio/Zotero/storage/K8FK4QT4/Choong et al_2020_The global rise of 3D printing during the COVID-19 pandemic.pdf} -} - -@article{chopraPresentFutureKnowledge2021, - title = {Past, Present, and Future of Knowledge Management for Business Sustainability}, - author = {Chopra, Meenu and Saini, Neha and Kumar, Satish and Varma, Arup and Mangla, Sachin Kumar and Lim, Weng Marc}, - year = {2021}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {328}, - pages = {129592}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129592}, - urldate = {2021-12-01} -} - -@article{chorevKnowledgeBasedEconomyGlobal2022, - title = {The {{Knowledge-Based Economy}} and the {{Global South}}}, - author = {Chorev, Nitsan and Ball, Amanda C.}, - year = {2022}, - journal = {Annual Review of Sociology}, - volume = {48}, - number = {1}, - pages = {171--191}, - doi = {10.1146/annurev-soc-080321-071214}, - urldate = {2022-08-11}, - abstract = {Research on knowledge-based economies and innovation tends to focus on the highest-ranked knowledge-advanced countries in the Global North and on high-growth countries in the Global South. In this article, we review the research on knowledge-based economies in the Global South and identify two important analytical shortcomings: the tendency to conflate upgrading with innovation and the tendency to focus on domestic factors. Moving beyond the familiar case studies, we explore the literature on pockets of knowledge-based industries in economies that are not dominantly knowledge-based. We then shift the focus from the private sector to explore the literature on state-led knowledge-based innovation, particularly welfare provisions and surveillance. We conclude by challenging the notion that innovation is simply the next step in industrial development and call for a more historically and geographically specific sociological approach to understanding innovation and knowledge-based industries, particularly in the Global South.}, - keywords = {Global South,industrialization,innovation,knowledge-based economy,low-income countries,upgrading} -} - -@article{Chouinard2019, - title = {Potential of Circular Economy Implementation in the Mechatronics Industry: {{An}} Exploratory Research}, - author = {Chouinard, Ugo and Pigosso, Daniela C.A. and McAloone, Tim C. and Baron, Luc and Achiche, Sofiane}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118014}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118014} -} - -@article{Christ2015, - title = {Fiber Reinforcement during {{3D}} Printing}, - author = {Christ, Susanne and Schnabel, Martin and Vorndran, Elke and Groll, J{\"u}rgen and Gbureck, Uwe}, - year = {2015}, - journal = {Materials Letters}, - volume = {139}, - pages = {165--168}, - publisher = {{Elsevier}}, - issn = {0167577X}, - doi = {10.1016/j.matlet.2014.10.065}, - abstract = {Three-dimensional (3D) printing is an attractive rapid prototyping technology for the fabrication of 3D structures by the localized deposition of a reactive binder liquid onto thin powder layers in predominantly technical applications. A practical limitation is often the low green strength of printed samples, which can lead to a collapse of large and fragile structures during removal from the powder bed and the following depowdering procedure. Fibre reinforcement may improve green mechanical properties of printed samples, which was investigated in this study using a range of different short fibres added to a matrix of cellulose-modified gypsum powder. Mechanical testing of printed samples revealed a bending strength increase of 180\% and up to 10 times higher work of fracture values compared to non-reinforced printed samples.}, - isbn = {0167-577X}, - keywords = {3D powder printing,Fibre reinforcement,Mechanical properties}, - file = {/Users/fabio/Zotero/storage/W7UV7L9S/Fiber reinforcement during 3D printing.pdf} -} - -@article{Christensen2019, - title = {Closed-Loop Recycling of Plastics Enabled by Dynamic Covalent Diketoenamine Bonds}, - author = {Christensen, Peter R. and Scheuermann, Angelique M. and Loeffler, Kathryn E. and Helms, Brett A.}, - year = {2019}, - month = may, - journal = {Nature Chemistry}, - volume = {11}, - number = {5}, - pages = {442--448}, - issn = {1755-4330}, - doi = {10.1038/s41557-019-0249-2} -} - -@article{Christis2019, - title = {Implementation at a City Level of Circular Economy Strategies and Climate Change Mitigation \textendash{} the Case of {{Brussels}}}, - author = {Christis, Maarten and Athanassiadis, Aristide and Vercalsteren, An}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {218}, - pages = {511--520}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.01.180} -} - -@article{christoforouEffectsLongtermExposure2020, - title = {Effects of Long-Term Exposure to Microfibers on Ecosystem Services Provided by Coastal Mussels}, - author = {Christoforou, Eleni and Dominoni, Davide M. and Lindstr{\"o}m, Jan and Stilo, Giulia and Spatharis, Sofie}, - year = {2020}, - month = nov, - journal = {Environmental Pollution}, - volume = {266}, - pages = {115184}, - publisher = {{Elsevier}}, - issn = {0269-7491}, - doi = {10.1016/J.ENVPOL.2020.115184}, - urldate = {2022-01-13}, - abstract = {The biofiltration capacity of bivalve populations is known to alleviate the effects of coastal eutrophication. However, this important ecosystem service could potentially be impaired by the increasing microplastic abundance in near shore environments. It is known that relatively large microplastics ({$\sim$}500 {$\mu$}m) impair the filtration capacity of bivalves. However, the effect of smaller microplastics, and specifically microfibers, is not known even though they are more common in many natural systems and similar in size to phytoplankton, the main food source of mussels. Here, we investigated the effects of long-term exposure to microfibers (MFs), which are smaller than 100 {$\mu$}m, on the biofiltration capacity of the blue mussel, Mytilus edulis. Our findings show that long-term exposure (here 39 days) to microfibers significantly reduced (21\%) the clearance of phytoplankton (Tetraselmis sp). While previous studies have shown that larger microplastics can decrease the filtration capacity of mussels after short-term exposure, our findings suggest that, for smaller MFs, mussel's clearance capacity is significantly affected after long-term exposure (39 days in this study). This may be due to the accumulation of MFs in the digestive system. In addition, the most efficient phytoplankton consumers were more susceptible to MF accumulation in the digestive system. This suggests that prolonged exposure to MF of coastal mussels could negatively impact the biofiltration of more potent individuals, thus decreasing the ecosystem service potential of the population as a whole.}, - pmid = {32683089}, - keywords = {Coastal ecosystems,Ecosystem services,Microfibers,Particle selection,Phytoplankton clearance} -} - -@article{Chu2016, - title = {From Design for Manufacturing ({{DFM}}) to Manufacturing for Design ({{MFD}}) via Hybrid Manufacturing and Smart Factory: {{A}} Review and Perspective of Paradigm Shift}, - author = {Chu, Won Shik and Kim, Min Soo and Jang, Ki Hwan and Song, Ji Hyeon and Rodrigue, Hugo and Chun, Doo Man and Cho, Young Tae and Ko, Seung Hwan and Cho, Kyu Jin and Cha, Suk Won and Min, Sangkee and Jeong, Sung Ho and Jeong, Haedo and Lee, Choon Man and Chu, Chong Nam and Ahn, Sung Hoon}, - year = {2016}, - journal = {International Journal of Precision Engineering and Manufacturing - Green Technology}, - volume = {3}, - number = {2}, - pages = {209--222}, - issn = {21980810}, - doi = {10.1007/s40684-016-0028-0}, - abstract = {Manufacturing paradigms have historically been shaped by social, economic, and technological aspect, including limitations and needs. Design for manufacturing (DFM) has been the main paradigm for last three decades since design is defined by the limitations of available manufacturing processes. Since reducing the time required for the development of new products has been one of the key issues for businesses, removing the gap between designers and manufacturers has been one of today's main goals. Many methods were developed to reduce this gap including information and communication technologies (ICT). However, current issues have been shifting towards design-related issues such that researchers have been trying to make products desired by the customers rather than that which is cheaper to manufacture. In this article, hybrid manufacturing (HM) and the concept of smart factory are introduced as key technologies for the future paradigm of manufacturing: Manufacturing for Design (MFD). Issues related to the development of HM process and examples of HM process are explained, and the importance of smart factories for the implementation of MFD is shown. Finally, future trends of HM and smart factory are predicted at the end of this article. \textcopyright{} 2016 Korean Society for Precision Engineering.}, - keywords = {Design for manufacturing,Hybrid manufacturing,Manufacturing for design,Platform,Smart factory}, - file = {/Users/fabio/Zotero/storage/TR3KCQ47/From design for manufacturing (DFM) to manufacturing for design (MFD) via hybrid manufacturing and smart factory A review and perspectiv.pdf} -} - -@article{Chu2021, - title = {Dynamic Flows of Polyethylene Terephthalate ({{PET}}) Plastic in {{China}}}, - author = {Chu, Jianwen and Cai, Yanpeng and Li, Chunhui and Wang, Xuan and Liu, Qiang and He, Mengchang}, - year = {2021}, - month = apr, - journal = {Waste Management}, - volume = {124}, - pages = {273--282}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.01.035}, - urldate = {2021-02-28} -} - -@misc{Chua2017, - title = {Standards, Quality Control, and Measurement Sciences in {{3D}} Printing and Additive Manufacturing}, - author = {Chua, Chee Kai and Wong, Chee How and Yeong, Wai Yee}, - year = {2017}, - publisher = {{Academic Press}}, - urldate = {2021-01-15} -} - -@article{chuLifecyclePerspectiveAnalyzing2022, - title = {A Life-Cycle Perspective for Analyzing Carbon Neutrality Potential of Polyethylene Terephthalate ({{PET}}) Plastics in {{China}}}, - author = {Chu, Jianwen and Zhou, Ya and Cai, Yanpeng and Wang, Xuan and Li, Chunhui and Liu, Qiang}, - year = {2022}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {330}, - pages = {129872}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129872}, - urldate = {2021-12-10} -} - -@article{chuSmartCityLess2021, - title = {A Smart City Is a Less Polluted City}, - author = {Chu, Zhen and Cheng, Mingwang and Yu, Ning Neil}, - year = {2021}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {172}, - pages = {121037}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121037}, - urldate = {2021-08-23}, - abstract = {This study aims to examine the impact of smart city construction on the ecological environment quality (EEQ) of China. Due to the problems arising from urbanisation, local governments construct smart cities as inherent innovative advantages that can improve their level of science and technology, and efficiency in resource allocation, thereby reducing environmental pollution. Through this innovation-driven channel, shocks to the degree of city smartness can have a significant impact on the regional environment. In order to compute the sensitivity of urban pollution to the degree of city smartness in China both conceptually and empirically, we modify a theoretical model of classic land allocation decisions to demonstrate how local officials' responsibilities to protect the ecological environment and promote economic growth can lead to the long-run spatial expansion of smart cities, resulting in the improvement of EEQ. Using a difference-in-differences (DID) analysis, we find that from 2005 to 2017 period, smart city initiatives in China reduced industrial exhaust gas and industrial wastewater by approximately 20.7\% and 12.2\%, respectively, such that most of the reduction may be attributed to the technology effect and allocation effect of urban innovation.} -} - -@article{Chylek2019, - title = {Fine Particle Emission during Fused Deposition Modelling and Thermogravimetric Analysis for Various Filaments}, - author = {Ch{\'y}lek, Radom{\'i}r and Kudela, Libor and Posp{\'i}{\v s}il, Ji{\v r}{\'i} and {\v S}najd{\'a}rek, Ladislav}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117790}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117790}, - urldate = {2020-03-14}, - abstract = {This paper discusses an experimental evaluation of fine particle emissions (16.5\textendash 583 nm) released by a three-dimensional printer from various printing materials. Fine particle emissions were identified for a three-dimensional printer that uses fused deposition modelling technology. A method for evaluation of fine particle emissions from printing materials was developed. This method allowed us to test twelve commonly available printing materials. Size distributions of the produced fine particles and their concentrations were observed for each printing material during the printing periods. The count median diameter of emitted particles ranged from 26 to 56 nm. Particle number concentrations in a closed cover of a three-dimensional printer ranged from 103\textendash 106 particles/cm3, depending on the particular printing material. Tested printing materials were then subjected to thermogravimetric analysis. This analysis provides detailed information about the emission of fine particles and mass loss of a sample of the material depending on the current temperature of the printing material. The study presents information about differences between particular printing materials in terms of the amount of emitted fine particles as well as the particle size distribution of the amount over time. The study also suggests that thermogravimetric analysis of materials can be used for estimation of particle emission that will occur during the printing process that is based on fused deposition modelling.}, - keywords = {3D printer,Emission,Filament,Fine particles,Fused deposition modelling,Printing materials} -} - -@article{Cicala2018, - title = {Hybrid Composites Manufactured by Resin Infusion with a Fully Recyclable Bioepoxy Resin}, - author = {Cicala, G. and Pergolizzi, E. and Piscopo, F. and Carbone, D. and Recca, G.}, - year = {2018}, - month = jan, - journal = {Composites Part B: Engineering}, - volume = {132}, - pages = {69--76}, - publisher = {{Elsevier Ltd}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2017.08.015}, - abstract = {Bioepoxy based monomers were formulated with a cure inhibitor and a cleavable amine to obtain a recyclable epoxy system suitable for resin infusion at room temperature. Hybrid flax/carbon fiber layup were used. Tensile, flexural and dynamo-mechanical properties for the composites were studied. The cured laminates were chemically recycled obtaining from the epoxy matrix a thermoplastic. The recycled was processed by fused deposition modelling (FDM) and injection molding after mixing with short kenaf fibers.}, - isbn = {1359-8368}, - keywords = {Epoxy,Flax,Fused deposition modelling,Kenaf,Recycling,Resin infusion}, - file = {/Users/fabio/Zotero/storage/53MA3AQF/hybrid composites manufactured by resin infusion with a fully recyclable bioepoxy resin.pdf} -} - -@article{Cicero2002, - title = {Supramolecular Morphology of Two-Step, Melt-Spun Poly(Lactic Acid) Fibers}, - author = {a. Cicero, John and Dorgan, John R. and Janzen, Jay and Garrett, James and Runt, James and Lin, J. S.}, - year = {2002}, - month = dec, - journal = {Journal of Applied Polymer Science}, - volume = {86}, - number = {11}, - pages = {2828--2838}, - issn = {0021-8995}, - doi = {10.1002/app.11267}, - urldate = {2015-02-21}, - keywords = {fibers,melt,morphology}, - file = {/Users/fabio/Zotero/storage/FEVEKMXP/Cicero et al. - 2002 - Supramolecular morphology of two-step, melt-spun poly(lactic acid) fibers.pdf} -} - -@article{Cicero2002a, - title = {Effects of Molecular Architecture on Two-Step, Melt-Spun Poly(Lactic Acid) Fibers}, - author = {a. Cicero, John and Dorgan, John R. and Garrett, James and Runt, James and Lin, J. S.}, - year = {2002}, - month = dec, - journal = {Journal of Applied Polymer Science}, - volume = {86}, - number = {11}, - pages = {2839--2846}, - issn = {0021-8995}, - doi = {10.1002/app.11268}, - urldate = {2014-09-15}, - keywords = {fibers,melt,morphology}, - file = {/Users/fabio/Zotero/storage/RCW2WZK4/Cicero et al. - 2002 - Effects of molecular architecture on two-step, melt-spun poly(lactic acid) fibers.pdf} -} - -@article{Cicero2002b, - title = {Physical {{Properties}} and {{Fiber Morphology}} of {{Poly}} ( Lactic Acid ) {{Obtained}} from {{Continuous Two-Step Melt Spinning}}}, - author = {Cicero, John A and Dorgan, John R}, - year = {2002}, - journal = {Journal of Polymers and the Environment}, - volume = {9}, - number = {1}, - pages = {1--10}, - keywords = {fibers,lactic acid,melt spinning,morphology,poly,polylactide}, - file = {/Users/fabio/Zotero/storage/GXXYEDAN/Cicero, Dorgan - 2002 - Physical Properties and Fiber Morphology of Poly ( lactic acid ) Obtained from Continuous Two-Step Melt Spinning.pdf} -} - -@article{Ciesla1997, - title = {Enhanced {{Rapid Prototyping}} for {{Faster Product Development Processes}}}, - author = {Ciesla, M and Ulbrich, A}, - year = {1997}, - volume = {46}, - number = {2}, - keywords = {capp,design,rapid p,rototyping}, - file = {/Users/fabio/Zotero/storage/5YLBMLEI/Enhanced Rapid Prototyping for Faster Product Development Processes.pdf} -} - -@article{Cimburova2021, - title = {Location Matters. {{A}} Systematic Review of Spatial Contextual Factors Mediating Ecosystem Services of Urban Trees}, - author = {Cimburova, Zofie and Berghauser Pont, Meta}, - year = {2021}, - month = aug, - journal = {Ecosystem Services}, - volume = {50}, - pages = {101296}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101296}, - urldate = {2021-06-10}, - abstract = {To ensure and maintain ecosystem service delivery in cities undergoing densification, strategic tree planting is important. The effects of tree location on ecosystem service delivery have been emphasised. However, there is no integrated overview of the different aspects of tree location, here called spatial contextual factors, that mediate urban tree ecosystem services. This paper presents the results of a systematic literature review and provides a comprehensive overview of spatial contextual factors recognised by research as relevant for ecosystem service delivery by urban trees. To support creating such an overview, we first gain insight into the current common understanding of what spatial context is conceptually and how it participates in the co-production of ecosystem services. We find that generally, spatial context is represented by both social and ecological structures and processes and that it mediates ecosystem services by four mechanisms along the ecosystem service cascade. In the next step, we identify 114 unique spatial contextual factors mediating 31 ecosystem services of urban trees. Of all factors, people, represented by physical location, socio-demographics or building functions, mediate the highest number of services, highlighting the importance of urban planning and design in mediating urban tree ecosystem services.}, - keywords = {Contextual factors,Ecosystem services,Mediating mechanisms,Spatial context,Strategic tree planting,Urban trees}, - file = {/Users/fabio/Zotero/storage/UBEP44AM/full-text.pdf} -} - -@article{Cimetta2013, - title = {Bioengineering Heart Tissue for in Vitro Testing.}, - author = {Cimetta, Elisa and {Godier-Furn{\'e}mont}, Amandine and {Vunjak-Novakovic}, Gordana}, - year = {2013}, - month = oct, - journal = {Current opinion in biotechnology}, - volume = {24}, - number = {5}, - eprint = {23932513}, - eprinttype = {pubmed}, - pages = {926--32}, - issn = {1879-0429}, - doi = {10.1016/j.copbio.2013.07.002}, - urldate = {2014-02-28}, - abstract = {A classical paradigm of tissue engineering is to grow tissues for implantation by using human stem cells in conjunction with biomaterial scaffolds (templates for tissue formation) and bioreactors (culture systems providing environmental control). A reverse paradigm is now emerging through microphysiological platforms for preclinical testing of drugs and modeling of disease that contain large numbers of very small human tissues. We discuss the biomimetic approach as a common underlying principle and some of the specifics related to the design and utilization of platforms with heart micro-tissues for high-throughput screening in vitro.}, - pmid = {23932513}, - keywords = {Animals,Biocompatible Materials,Biological,Biomimetics,Biomimetics: methods,Bioreactors,Drug Evaluation,Heart Diseases,Heart Diseases: drug therapy,Heart Diseases: pathology,Heart Diseases: physiopathology,High-Throughput Screening Assays,High-Throughput Screening Assays: methods,Humans,Models,Myocardium,Myocardium: cytology,Myocardium: metabolism,Preclinical,Preclinical: methods,Stem Cells,Stem Cells: cytology,Tissue Engineering,Tissue Scaffolds}, - file = {/Users/fabio/Zotero/storage/ABHIKUFH/Cimetta, Godier-Furnémont, Vunjak-Novakovic - 2013 - Bioengineering heart tissue for in vitro testing.pdf} -} - -@article{cimpanPlasticPackagingFlows2021, - title = {Plastic Packaging Flows in {{Europe}}: {{A}} Hybrid Input-Output Approach}, - author = {Cimpan, Ciprian and Bjelle, Eivind Lekve and Str{\o}mman, Anders Hammer}, - year = {2021}, - month = dec, - journal = {Journal of Industrial Ecology}, - volume = {25}, - number = {6}, - pages = {1572--1587}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13175}, - urldate = {2022-01-25}, - abstract = {The European Union (EU) set ambitious goals toward more sustainable use of plastics, but the basis for measuring performance and monitoring progress toward these goals remains inadequate due to a limited understanding of the complex systems behind plastic consumption. In this work, we study the region-wide material flows of plastics related to packaging in 2014 using a hybrid approach that combines data on the production and end-of-life management of plastic packaging with a monetary input-output model for the EU. The approach enables us to gain insight into interindustry flows and the connection between production and final demand. We map supply chains with a relatively high resolution, including polymer types, packaging forms and application categories. Results estimate the total packaging placed on the market (POM) and then discarded amounted to 18,000 kt., excluding a net increase in stocks of 500 kt. This means that waste generation could have been up to 15\% higher than accounted in official statistics, reinforcing potential underreporting accounts as well as remaining data gaps. Thirty-five percent of postconsumer packaging waste was directed toward recycling. However, only 5\% contributed to new domestic packaging production, a reflection of the broad challenges to plastic circularity. Although first steps are taken in this work, we point to an acute lack of information on industrial streams, compounded by missing policy focus, for example, on transport packaging. We suggest areas for deeper investigation and emphasize the potential of hybrid approaches to establishing baselines and assessment of both production and consumption-side mitigation strategies.}, - keywords = {28,circular economy,EU,hybrid input,industrial ecology,material flows,output,plastic packaging}, - file = {/Users/fabio/Zotero/storage/XFTT8WNX/full-text.pdf} -} - -@article{Cinelli2016, - title = {Recyclability of {{PET}}/{{WPI}}/{{PE}} Multilayer Films by Removal of Whey Protein Isolate-Based Coatings with Enzymatic Detergents}, - author = {Cinelli, Patrizia and Schmid, Markus and Bugnicourt, Elodie and Coltelli, Maria Beatrice and Lazzeri, Andrea}, - year = {2016}, - month = jun, - journal = {Materials}, - volume = {9}, - number = {6}, - publisher = {{MDPI AG}}, - issn = {19961944}, - doi = {10.3390/ma9060473}, - urldate = {2020-04-08}, - abstract = {Multilayer plastic films provide a range of properties, which cannot be obtained from monolayer films but, at present, their recyclability is an open issue and should be improved. Research to date has shown the possibility of using whey protein as a layer material with the property of acting as an excellent barrier against oxygen and moisture, replacing petrochemical non-recyclable materials. The innovative approach of the present research was to achieve the recyclability of the substrate films by separating them, with a simple process compatible with industrial procedures, in order to promote recycling processes leading to obtain high value products that will beneficially impact the packaging and food industries. Hence, polyethyleneterephthalate (PET)/polyethylene (PE) multi-layer film was prepared based on PET coated with a whey protein layer, and then the previous structure was laminated with PE. Whey proteins, constituting the coating, can be degraded by enzymes so that the coating films can be washed offfrom the plastic substrate layer. Enzyme types, dosage, time, and temperature optima, which are compatible with procedures adopted in industrial waste recycling, were determined for a highly-efficient process. The washing of samples based on PET/whey and PET/whey/PE were efficient when performed with enzymatic detergent containing protease enzymes, as an alternative to conventional detergents used in recycling facilities. Different types of enzymatic detergents tested presented positive results in removing the protein layer from the PET substrate and from the PET/whey/PE multilayer films at room temperature. These results attested to the possibility of organizing the pre-treatment of the whey-based multilayer film by washing with different available commercial enzymatic detergents in order to separate PET and PE, thus allowing a better recycling of the two different polymers. Mechanical properties of the plastic substrate, such as stress at yield, stress and elongation at break, evaluated by tensile testing on films before and after cleaning, were are not significantly affected by washing with enzymatic detergents.}, - keywords = {Enzymatic detergents,Multilayer films,Polyethylene (PE),Polyethylene terephthalate (PET),Protease,Recyclability,Whey protein isolate}, - file = {/Users/fabio/Zotero/storage/8QTRYSJD/full-text.pdf} -} - -@inproceedings{Ciobanu2018, - title = {Specific {{Tests Concerning Microwave Sterilization Efficiency}} of {{Combined Plastic}} and {{Paper Waste}}}, - booktitle = {{{EPE}} 2018 - {{Proceedings}} of the 2018 10th {{International Conference}} and {{Expositions}} on {{Electrical And Power Engineering}}}, - author = {Ciobanu, Romeo Cristian and Ursan, George Andrei and Aradoaei, Mihaela and Batrinescu, Gheorghe and Banciu, Alina Roxana}, - year = {2018}, - month = dec, - pages = {1000--1003}, - publisher = {{Institute of Electrical and Electronics Engineers Inc.}}, - doi = {10.1109/ICEPE.2018.8559931}, - urldate = {2020-04-08}, - abstract = {Waste management is one of the major issues facing Romania in terms of environmental protection. This concerns the collection, transport, sorting, treatment, recovery and/or disposal of waste. Public Administration authorities play an important role in ensuring the implementation of the waste management obligations assumed by Romania through the EU Accession Treaty.}, - isbn = {978-1-5386-5062-2}, - keywords = {microwave sterilization,plastic and paper waste,specific tests} -} - -@article{ciottiReviewAccuracyThermoplastic2021, - title = {A Review of the Accuracy of Thermoplastic Polymeric Parts Fabricated by Additive Manufacturing}, - author = {Ciotti, Michele and Campana, Giampaolo and Mele, Mattia}, - year = {2021}, - journal = {Rapid Prototyping Journal}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-11-2020-0295}, - urldate = {2021-10-29}, - abstract = {Purpose: This paper aims to present a survey concerning the accuracy of thermoplastic polymeric parts fabricated by additive manufacturing (AM). Based on the scientific literature, the aim is to provide an updated map of trends and gaps in this relevant research field. Several technologies and investigation methods are examined, thus giving an overview and analysis of the growing body of research. Design/methodology/approach: Permutations of keywords, which concern materials, technologies and the accuracy of thermoplastic polymeric parts fabricated by AM, are used for a systematic search in peer-review databases. The selected articles are screened and ranked to identify those that are more relevant. A bibliometric analysis is performed based on investigated materials and applied technologies of published papers. Finally, each paper is categorised and discussed by considering the implemented research methods. Findings: The interest in the accuracy of additively manufactured thermoplastics is increasing. The principal sources of inaccuracies are those shrinkages occurring during part solidification. The analysis of the research methods shows a predominance of empirical approaches. Due to the experimental context, those achievements have consequently limited applicability. Analytical and numerical models, which generally require huge computational costs when applied to complex products, are also numerous and are investigated in detail. Several articles deal with artificial intelligence tools and are gaining more and more attention. Originality/value: The cross-technology survey on the accuracy issue highlights the common critical aspects of thermoplastics transformed by AM. An updated map of the recent research literature is achieved. The analysis shows the advantages and limitations of different research methods in this field, providing an overview of research trends and gaps.}, - keywords = {Accuracy,Additive manufacturing,Shrinkage,Thermoplastic polymers} -} - -@article{cipiDetectingDevelopingNew2023, - title = {Detecting and Developing New Business Opportunities in Society 5.0 Contexts: {{A}} Sociotechnical Approach}, - shorttitle = {Detecting and Developing New Business Opportunities in Society 5.0 Contexts}, - author = {{\c C}ipi, Amali and Fernandes, Ana Cl{\'a}udia R. D. and Ferreira, Fernando A. F. and Ferreira, Neuza C. M. Q. F. and {Meidut{\.e}-Kavaliauskien{\.e}}, Ieva}, - year = {2023}, - month = may, - journal = {Technology in Society}, - volume = {73}, - pages = {102243}, - issn = {0160-791X}, - doi = {10.1016/j.techsoc.2023.102243}, - urldate = {2023-05-10}, - abstract = {Rapid technological evolution has become a great challenge for businesses and societies due to the openness provided by new digital technologies, platforms, and infrastructure and to the impacts of these innovations on how people work and live. The concept of a super-smart society (i.e., Society 5.0) comprises a fresh way to apply these innovations, in which human beings contribute to adapting technologies to daily activities in their society and making Society 5.0 ideas applicable to different areas of each individual's life. Digital transformation and technological innovation are basic components of this paradigm. This study sought to develop a decision-support model that can help companies structure and prioritize new business opportunities within Society 5.0 contexts. The analysis system relies on a constructivist approach that promotes debates between specialists and combinations of methodologies such as cognitive mapping and interpretive structural modeling. The results highlight the most important areas in which new business opportunities can arise, thereby demonstrating that the proposed model is a valuable tool for incorporating a future orientation into business technological innovation initiatives.}, - langid = {english}, - keywords = {Cognitive mapping,Interpretive structural modeling (ISM),New business opportunity,Society 5.0,Technological innovation}, - file = {/Users/fabio/Zotero/storage/IRZZ4WU2/Çipi et al. - 2023 - Detecting and developing new business opportunitie.pdf;/Users/fabio/Zotero/storage/2CEN95V9/S0160791X23000489.html} -} - -@article{CircularEconomyWaste, - title = {The Circular Economy of Waste: Recovery, Incineration and Urban Reuse}, - shorttitle = {The Circular Economy of Waste}, - journal = {Journal of Environmental Planning and Management}, - urldate = {2022-08-24}, - abstract = {This article examines how the political economy of waste utility services is changing in response to circular economy programs. It focuses on the financial composition, economic position and geogra...}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/KJPZZHSZ/09640568.2020.html} -} - -@article{ciriminnaEducatingManagersBioeconomy2022, - title = {Educating the Managers of the Bioeconomy}, - author = {Ciriminna, Rosaria and Albanese, Lorenzo and Meneguzzo, Francesco and Pagliaro, Mario}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {366}, - pages = {132851}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.132851}, - urldate = {2022-08-05}, - abstract = {The educational gap for which science is not taught to managers, and management is not taught to scientists, is a significant obstacle to a company's success also in the bioeconomy field. The characteristic aspects of innovation in the bioeconomy contribute to explaining why it is difficult to find managers for bioeconomy companies. In addition, many different sectors in the bioeconomy pose different managerial challenges. Shaping the managers of successful bioeconomy companies requires to transfer a closer understanding of the nature of bioeconomy companies and their competitive landscape, as well as identifying the main guiding principles for managing these organizations. Following the analysis of the first thirty years of bioeconomy company attempts to replace chemical productions based on oil-derived feedstocks, including innovation dynamics, in this research we aim to identify the main guiding principles of successful bioeconomy companies engaged in the production of bioproducts.}, - langid = {english}, - keywords = {Bioeconomy,Bioeconomy education,Bioeconomy managers,Cleaner production,Management education}, - file = {/Users/fabio/Zotero/storage/7BCFGNCV/S0959652622024453.html} -} - -@article{civancik-usluMovingLinearCircular2021, - title = {Moving from Linear to Circular Household Plastic Packaging in {{Belgium}}: {{Prospective}} Life Cycle Assessment of Mechanical and Thermochemical Recycling}, - author = {{Civancik-Uslu}, Didem and Nhu, T.T. and Van Gorp, Bart and Kresovic, Uros and Larrain, Macarena and Billen, Pieter and Ragaert, Kim and De Meester, Steven and Dewulf, Jo and Huysveld, Sophie}, - year = {2021}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {171}, - pages = {105633}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105633}, - urldate = {2021-05-10} -} - -@misc{CL_ReaderPdf, - title = {{CL\_Reader.pdf}}, - journal = {Dropbox}, - urldate = {2022-08-16}, - abstract = {Partag\'e avec Dropbox}, - howpublished = {https://www.dropbox.com/s/64q6fn18wz4ewtt/CL\_Reader.pdf?dl=0}, - langid = {french}, - file = {/Users/fabio/Downloads/CL_Reader.pdf;/Users/fabio/Zotero/storage/VUU3Q2JR/CL_Reader.html} -} - -@techreport{Cl2000, - title = {Les Concepts et La M\'ethodologie de {{Taguchi}} Dans Le Design de Produits {{Bernard Cl\'ement PhD \'Ecole Polytechnique}} de {{Montr\'eal}}}, - author = {Cl{\'e}ment, Bernatd}, - year = {2000}, - pages = {1--28}, - institution = {{\'Ecole Polytechnique de Montr\'eal et G\'enistat Conseils Inc.}}, - file = {/Users/fabio/Zotero/storage/VCEWMN79/Les concepts et la méthodologie de Taguchi dans le design de produits Bernard Clément PhD École Polytechnique de Montréal.pdf} -} - -@article{Clancy, - title = {Fused {{Deposition}} of {{Ceramics}} : {{Progress Towards}} a {{Robust}} and {{Controlled Process}} for {{Commercialization The}} Feasibility of Using the {{Fused Deposition}} of {{Ceramics}} ( {{FDC}} ) Process to Rapidly Fabricate Manufacturing Technique , by Eliminating the Need for Cost}, - author = {Clancy, R and Jamalabad, V and Whalen, P and Bhargava, P and Dai, C and Rangarajan, S and Wu, S and Danforth, S and Langrana, N and Safari, A}, - pages = {185--194}, - file = {/Users/fabio/Zotero/storage/2ISR4L2A/Clancy et al. - Unknown - Fused Deposition of Ceramics Progress Towards a Robust and Controlled Process for Commercialization The feasi.pdf} -} - -@article{Clark2020, - title = {Sustainability {{Science}}: {{Toward}} a {{Synthesis}}}, - author = {Clark, William C. and Harley, Alicia G.}, - year = {2020}, - month = oct, - journal = {Annual Review of Environment and Resources}, - volume = {45}, - number = {1}, - pages = {331--386}, - publisher = {{Annual Reviews}}, - issn = {1543-5938}, - doi = {10.1146/annurev-environ-012420-043621}, - urldate = {2020-10-28}, - abstract = {This review synthesizes diverse approaches that researchers have brought to bear on the challenge of sustainable development. We construct an integrated framework highlighting the union set of elements and relationships that those approaches have shown to be useful in explaining nature\textendash society interactions in multiple contexts. Compelling evidence has accumulated that those interactions should be viewed as a globally interconnected, complex adaptive system in which heterogeneity, nonlinearity, and innovation play formative roles. The long-term evolution of that system cannot be predicted but can be understood and partially guided through dynamic interventions. Research has identified six capacities necessary to support such interventions in guiding development pathways toward sustainability. These are capacities to ( a) measure sustainable development, ( b) promote equity, ( c) adapt to shocks and surprises, ( d) transform the system into more sustainable development pathways, ( e) link knowledge with action, and ( f) devise governance arrangements that allow people to work together in exercising the other capacities.}, - keywords = {adaptation,co-production,complexity,equity,governance,inclusive wealth,innovation,nature-society interactions,power,transformation}, - file = {/Users/fabio/Zotero/storage/X8M3T7GP/full-text.pdf} -} - -@article{clarkCraftingUsableKnowledge2016, - title = {Crafting Usable Knowledge for Sustainable Development}, - author = {Clark, William C. and Van Kerkhoff, Lorrae and Lebel, Louis and Gallopin, Gilberto C.}, - year = {2016}, - month = apr, - journal = {Proceedings of the National Academy of Sciences of the United States of America}, - volume = {113}, - number = {17}, - pages = {4570--4578}, - publisher = {{National Academy of Sciences}}, - issn = {10916490}, - doi = {10.1073/pnas.1601266113}, - urldate = {2021-04-29}, - abstract = {This paper distills core lessons about how researchers (scientists, engineers, planners, etc.) interested in promoting sustainable development can increase the likelihood of producing usable knowledge. We draw the lessons from both practical experience in diverse contexts around the world and from scholarly advances in understanding the relationships between science and society. Many of these lessons will be familiar to those with experience in crafting knowledge to support action for sustainable development. However, few are included in the formal training of researchers. As a result, when scientists and engineers first venture out of the laboratory or library with the goal of linking their knowledge with action, the outcome has often been ineffectiveness and disillusionment. We therefore articulate here a core set of lessons that we believe should become part of the basic training for researchers interested in crafting usable knowledge for sustainable development. These lessons entail at least four things researchers should know, and four things they should do. The knowing lessons involve understanding the coproduction relationships through which knowledge making and decision making shape one another in social-environmental systems. We highlight the lessons that emerge from examining those coproduction relationships through the ICAP lens, viewing them from the perspectives of Innovation systems, Complex systems, Adaptive systems, and Political systems. The doing lessons involve improving the capacity of the research community to put its understanding of coproduction into practice. We highlight steps through which researchers can help build capacities for stakeholder collaboration, social learning, knowledge governance, and researcher training.}, - pmid = {27091979}, - keywords = {Capacity,Coproduction,Knowledge systems,Science-policy interface,Sustainable development}, - file = {/Users/fabio/Zotero/storage/WPA8CEBR/full-text.pdf} -} - -@article{clarkSubjectiveWellbeingChina2019, - title = {Subjective Well-Being in {{China}}'s Changing Society}, - author = {Clark, William A.V. and Yi, Daichun and Huang, Youqin}, - year = {2019}, - month = aug, - journal = {Proceedings of the National Academy of Sciences of the United States of America}, - volume = {116}, - number = {34}, - pages = {16799--16804}, - publisher = {{National Academy of Sciences}}, - issn = {10916490}, - doi = {10.1073/pnas.1902926116}, - urldate = {2021-06-10}, - abstract = {There is now recognition that a population's overall level of wellbeing is defined not just by income and wealth. Where we live and who we interact with are likely to be equally important in our overall levels of satisfaction with our lives. This thinking has stimulated studies of subjective well-being, or happiness, at both national and local scales. These studies suggest that where you live does matter, although it is health and family status that have the most direct effects on well-being. In this study, we use a detailed dataset on well-being from the China Household Finance Survey to reexamine well-being across China, where profound socioeconomic changes are taking place. The study controls for self-reported health and examines subjective well-being across extensive and varied Chinese urban and rural environments. We find that the earlier pessimism about China's well-being, which emphasized declining happiness, may be misplaced. We make two contributions: first, we show a rising level of subjective well-being, and second, we show that there is a narrowing gap in well-being across different social indicators. Methodologically, we bring in the perspectives of both social capital and geographic context.}, - pmid = {31371499}, - keywords = {China,Life satisfaction,Places,Social capital,Subjective well-being}, - file = {/Users/fabio/Zotero/storage/6ACVNX3C/full-text.pdf} -} - -@article{Claussen2020, - title = {The Role of Pre-Innovation Platform Activity for Diffusion Success: {{Evidence}} from Consumer Innovations on a {{3D}} Printing Platform}, - author = {Claussen, J{\"o}rg and Halbinger, Maria A.}, - year = {2020}, - month = mar, - journal = {Research Policy}, - pages = {103943}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.103943}, - urldate = {2020-03-23} -} - -@article{Clayton2015, - title = {The {{Application}} of {{Powder Rheology}} in {{Additive Manufacturing}}}, - author = {Clayton, Jamie and {Millington-Smith}, Doug and Armstrong, Brian}, - year = {2015}, - journal = {Jom}, - volume = {67}, - number = {3}, - pages = {544--548}, - issn = {15431851}, - doi = {10.1007/s11837-015-1293-z}, - abstract = {Additive manufacturing (AM) is sensitive to powder variability when applying fine layers in a uniform manner. This demands a high degree of consistency and repeatability in the feedstock. Particle size is often used as a critical quality attribute, but this is not sufficient to fully qualify a feedstock. Indeed, it is inadequate to suggest that any parameter from a single test, e.g., Hall flowmeter or Hausner ratio, can comprehensively describe a powder's characteristics. This article uses four case studies to demonstrate the limitations of single parameter characterization and how the rheological properties of several metal powders used in AM applications are used to establish in-process performance. In the first study, the significantly reduced permeability and increased specific energy of a one batch of powder demonstrate a clear link to poor layer uniformity. The second study investigates the impact of metal powder manufacturing methods and suppliers, and it shows how shear properties alone cannot be relied on to identify properties that influence the process. The effect of additives on the processability of polymer blends used in AM is also evaluated, and the results show that even small quantities can have a significant effect on the permeability and basic flowability energy of feedstocks. The final study demonstrates the how rheological measurements can be used to identify the optimum blend of fresh and used material when reusing metal powders to manufacture components. These case studies illustrate the ability of a modern powder rheometer to detect minor variations in powders that are directly relevant to performance in AM processes in a way that traditional characterization methods cannot. \textcopyright{} 2015, The Minerals, Metals \& Materials Society.}, - file = {/Users/fabio/Zotero/storage/TSFDLJAB/Clayton, Millington-Smith, Armstrong - 2015 - The Application of Powder Rheology in Additive Manufacturing.pdf} -} - -@article{cleemanScalableFlexibleResilient2022, - title = {Scalable, {{Flexible}} and {{Resilient Parallelization}} of {{Fused Filament Fabrication}}:{{Breaking Endemic Tradeoffs}} in {{Material Extrusion Additive Manufacturing}}}, - author = {Cleeman, Jeremy and Bogut, Alex and Mangrolia, Brijesh and Ripberger, Adeline and Kate, Kunal and Zou, Qingze and Malhotra, Rajiv}, - year = {2022}, - month = may, - journal = {Additive Manufacturing}, - pages = {102926}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102926}, - urldate = {2022-05-28} -} - -@article{Clemon2018, - title = {On the Tolerable Limits of Granulated Recycled Material Additives to Maintain Structural Integrity}, - author = {Clemon, L.M. and Zohdi, T.I.}, - year = {2018}, - month = apr, - journal = {Construction and Building Materials}, - volume = {167}, - pages = {846--852}, - publisher = {{Elsevier Ltd}}, - issn = {09500618}, - doi = {10.1016/j.conbuildmat.2018.02.099}, - abstract = {Production and maker spaces are increasingly generating mixed plastic material waste of varying quality from 3-D printers. Industrial interest is growing in embedding granulated recycled particulate material additives into a virgin binding matrix. Examples include the introduction of granulated mixed recycled materials into 3-D printer material, concrete, and pavement. The stress load-sharing between the particulate additive and the binding matrix is an important factor in design and development of these composite materials. With mixed material additives, a designer is interested in the variation of such predicted load-sharing. However, experimental development is costly and time-consuming, thus analytical and semi-analytical estimates are desired for accelerated development. In this work, we expand on previous analytically correlated phase-averaged micro- and macrostructural loading to include variational effects present in mixed recycled material. In addition, model trade-offs are provided to aid designers in quickly selecting application specific mixtures. This framework identifies the stress contributions, and their variation, to reduce product development time and costs, which could greatly accelerate material recycling and reuse for improved infrastructure materials, low-cost 3-D printer filament, and reduced waste towards a more circular economy.}, - keywords = {Additive manufacturing,Composites,Particles,Phase averages,Recycling}, - file = {/Users/fabio/Zotero/storage/28B5Y4WP/on the tolerable limits of granulated recycled material additives to maintain structural integrity .pdf} -} - -@article{Clift1997, - title = {Overview {{Clean Technology}}\textemdash{{The Idea}} and the {{Practice}}*}, - author = {Clift, Roland}, - year = {1997}, - month = apr, - journal = {Journal of Chemical Technology \& Biotechnology}, - volume = {68}, - number = {4}, - pages = {347--350}, - issn = {0268-2575}, - doi = {10.1002/(SICI)1097-4660(199704)68:4<347::AID-JCTB667>3.0.CO;2-L}, - keywords = {but approaches the problem,clean technology,clean technology and sustainability,cleaner production,industrial ecology,of,of sus-,recycling,technology has developed out,the idea of clean}, - file = {/Users/fabio/Zotero/storage/ALCIA55K/Overview Clean Technology—The Idea and the Practice.pdf} -} - -@book{Clift2016, - title = {Taking {{Stock}} of {{Industrial Ecology}}}, - author = {Clift, Roland and Druckman, Angela}, - year = {2016}, - doi = {10.1007/978-3-319-20571-7}, - abstract = {The study of cities, or urban systems, in Industrial Ecology has a peculiar history. In the 1960s, there was a false dawn for green cities in the United States under the Experimental City project, the unfulfi lled plans for which included numer-ous aspects of Industrial Ecology (IE). When IE eventually began to form as a dis-cipline in the 1990s, cities or urban systems were at best a fringe topic, although their importance was recognized by thought leaders in the fi eld. The development of research on cities as a theme within IE perhaps followed with the broadening of IE to include Social Ecology. Then the study of urban metabolism, which had its own separate literature, arguably became one of the three metabolisms within IE \textendash{} along with industrial and socio-economic. In this review of work on IE and cities, a Scopus search of ISI-rated publications fi nds over 200 papers on the topic, many of which are in the Journal of Industrial Ecology . Amongst the common themes are papers on urban industrial symbiosis, urban infrastructure frameworks, transportation, waste, energy, greenhouse gas emissions, other urban contaminants, metals, phos-phorus and food in cities. The great ongoing challenge for work on IE and cities remains to understand the environmental impacts related to urban metabolism and attempt to reduce them. More specifi c examples of possible future work include determining potentials for city-scale industrial symbiosis and uncovering how much is occurring and exploring theoretical limits to the sustainability of cities using non-equilibrium thermodynamics.}, - isbn = {978-3-319-20570-0}, - pmid = {18857557}, - file = {/Users/fabio/Zotero/storage/SNNMB6RW/multinational corporations and the circular economy- how hewlett packard scales innovation and technology in its global supply chain.pdf} -} - -@article{Climatelabs, - title = {Climatelabs {{Project}}}, - author = {Paper, A Senior Comprehensive}, - year = {2018}, - volume = {1}, - pages = {2--3}, - file = {/Users/fabio/Zotero/storage/6GHZ2EIV/Annex1_ Detailed project description_CLIMATE LABS_.pdf} -} - -@article{Clohessy2019, - title = {Investigating the Influence of Organizational Factors on Blockchain Adoption}, - author = {Clohessy, Trevor and Acton, Thomas}, - year = {2019}, - month = aug, - journal = {Ind. Manag. Data Syst.}, - volume = {119}, - number = {7}, - pages = {1457--1491}, - issn = {0263-5577}, - doi = {10.1108/IMDS-08-2018-0365}, - file = {/Users/fabio/Zotero/storage/DY4XW7RS/Clohessy_Acton_2019_Investigating the influence of organizational factors on blockchain adoption.pdf} -} - -@misc{ClosingLoopEU, - type = {Policy {{Document}}}, - title = {Closing the Loop - {{An EU}} Action Plan for the {{Circular Economy COM}}/2015/0614 Final \textemdash{} {{European Environment Agency}}}, - urldate = {2022-11-04}, - abstract = {COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT, THE COUNCIL, THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE AND THE COMMITTEE OF THE REGIONS Closing the loop - An EU action plan for the Circular Economy}, - howpublished = {https://www.eea.europa.eu/policy-documents/com-2015-0614-final}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/B3DG4EZP/com-2015-0614-final.html} -} - -@article{clubeJobCreationLegitimate2022, - title = {Is Job Creation a Legitimate Social Benefit of the Circular Economy?}, - author = {Clube, Rebecca}, - year = {2022}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {181}, - pages = {106220}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106220}, - urldate = {2022-02-09} -} - -@article{cocchiTECHMARKETFINDING2023, - title = {{{TECH TO MARKET}}. {{FINDING AND DESIGNING SUITABLE TECHNOLOGY APPLICATIONS WITH DESIGN THINKING}}}, - author = {Cocchi, Nicol{\`o} and Dosi, Clio and Vignoli, Matteo}, - year = {2023}, - month = jul, - journal = {Proceedings of the Design Society}, - volume = {3}, - pages = {3315--3324}, - issn = {2732-527X}, - doi = {10.1017/pds.2023.332}, - urldate = {2023-09-06}, - abstract = {Although it's human centered focus, design thinking has proven to be effective also in technology-driven projects, both in education and business. Yet, scant research has investigated whether and how design thinking might be leveraged to find new opportunities based on emerging technologies and design new innovation concepts accordingly. To address this gap, we employed an Action Innovation Management Research framework and co-designed a program called Tech to Market with Oper.Space, the design factory for Open Innovation of the University of Bologna. We ran 5 iterations of the program from October 2018 to December 2022, in which we conducted 52 interviews, observed 10 presentations, and held 10 meetings with the main stakeholders involved. Our results show how to apply design thinking to find and design a suitable application for a given technology, contributing to the ongoing conversation about the implementation of design thinking in technology-driven projects.}, - langid = {english}, - keywords = {Design management,Design methods,Design thinking,Innovation,Technology management}, - file = {/Users/fabio/Zotero/storage/NW8F3CZ8/Cocchi et al_2023_TECH TO MARKET.pdf} -} - -@article{Coccia2019, - title = {Why Do Nations Produce Science Advances and New Technology?}, - author = {Coccia, Mario}, - year = {2019}, - month = nov, - journal = {Technology in Society}, - volume = {59}, - pages = {101124}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.03.007}, - urldate = {2020-05-12}, - abstract = {One of the interesting questions in the field of social sciences is to explain why nations produce science advances and new technology that generate economic and social change. This paper endeavors to clarify some drivers of science and technology (S\&T) of nations. The thesis of this paper is that nations produce science advances and new technology to endorse a socio economic power and leadership directed to take advantage of important opportunities or to cope with environmental threats in competitive settings. In general, science advances and new technology are due to organized social and economic efforts of nations to achieve breakthroughs directed to support national interests of institutions and wellbeing of population. In particular, the production of science advances and new technology is driven by individuals, which have the natural tendency to seek out novelty and challenges, to explore, to learn and to achieve goals within efficient organizations in line with national interests. Preliminary empirical evidence here seems to support the factors underlying motivations of nations to produce science advances and new technology in society. Overall, then this paper may form a ground work for development of more sophisticated studies and theoretical frameworks that explain the drivers of S\&T in society.}, - keywords = {Commercialization of science,Economics of science,Evolution of science,Global leadership,New technology,Political economy of science,R\&D investments,Science advances,Scientific research,Social power,Technological change,Technological ecosystem} -} - -@article{cocciaAsymmetryTechnologicalCycle2020, - title = {Asymmetry of the Technological Cycle of Disruptive Innovations}, - author = {Coccia, Mario}, - year = {2020}, - journal = {Technology Analysis and Strategic Management}, - pages = {1--16}, - publisher = {{Routledge}}, - issn = {14653990}, - doi = {10.1080/09537325.2020.1785415}, - urldate = {2020-07-20}, - abstract = {A vast literature exists on disruptive technologies. However, some fundamental questions are unknown, such as: how to measure the growth of disruptive technologies in competitive markets? How is the pathway of technological cycle of disruptive innovations? The study confronts these questions here by developing a theoretical and empirical analysis, which endeavours to explain the behaviour of disruptive technologies that generate industrial and corporate change. A simple model is proposed to measure the relative growth of disruptive technologies compared to established technologies. This analytical approach is applied on the evolution of technologies in the US sound-recorded music industry. Empirical findings suggest general properties that can expand disruptive innovation theory, namely: (1) disruptive technology has a disproportionate growth in markets compared to established technologies; (2) technological cycle of disruptive technology has up wave phase longer than down wave phase (asymmetric shape of technological cycle) and (3) disruptive technology has a series of major and minor technological advances of its own that pave the way for dominance on other established technologies in markets. Best practices for management of technology are discussed.}, - keywords = {disruptive innovation,Disruptive technology,technological cycle,technology change} -} - -@article{Coenen2016, - title = {Towards {{FALL}}: {{A Framework For Agile Living Lab Projects}}}, - author = {Coenen, Tanguy and Robijt, Sarie}, - year = {2016}, - journal = {Open Living Lab Days}, - volume = {7}, - number = {1}, - pages = {37--43}, - doi = {doi:10.1109/Agile.2008.33}, - keywords = {agile - methodology -,design science research -,living labs,scrum - lean} -} - -@article{Cohen2014, - ids = {Cohen2014a}, - title = {Fostering Mainstream Adoption of Industrial {{3D}} Printing: {{Understanding}} the Benefits and Promoting Organizational Readiness}, - author = {Cohen, Daniel L.}, - year = {2014}, - month = jun, - journal = {3D Printing and Additive Manufacturing}, - volume = {1}, - number = {2}, - pages = {62--69}, - publisher = {{Mary Ann Liebert Inc.}}, - issn = {2329-7662}, - doi = {10.1089/3dp.2014.0007}, - abstract = {As the multibillion dollar additive manufacturing (AM) industry continues to evolve, a growing number of companies have adopted 3D printing to produce finished goods. Yet recent research suggests that AM has barely begun to achieve its potential market; estimates on current penetration range from just 1\% to 10\%. It is not surprising that executives are having difficulty; the technology has many second-order effects on business operations and economics. Three factors - technology, awareness, and organizational readiness - contribute to adoption rates. A recent McKinsey \& Company survey of leading manufacturers highlights a general lack of awareness of AM's applications and value. Interestingly, 40\% of the respondents were unfamiliar with the technology "beyond press coverage," and an additional 12\% of respondents indicated that AM "might be relevant but [they] needed to learn more about the technology." In essence, more than half of the market has yet to grasp AM's applications. Once this pent-up potential is unlocked, companies will face organizational challenges that require new management processes, alignment across business units, proactive executive champions, and fresh employee capabilities. To drive the conversation forward, executives must examine AM's potential benefits and identify the steps their companies should take to ensure organizational readiness.} -} - -@article{colijnScienceMediaFraming2022, - ids = {colijn2022a}, - title = {Science and Media Framing of the Future of Plastics in Relation to Transitioning to a Circular Economy}, - author = {Colijn, Ivanna and Fraiture, Fabrice and Gommeh, Efrat and Schro{\"e}n, Karin and Metze, Tamara}, - year = {2022}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {370}, - pages = {133472}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133472}, - urldate = {2022-08-22}, - abstract = {Plastics play an important role in the transition from the current linear economy to a more circular one, but ideas differ about this role. These ideas were studied in this article as a form of futurity framing. These framings may hinder or contribute to a transition toward a circular bioeconomy by opening up or closing down alternative paradigms for thinking about plastics in the future. Based on a media analysis of four Dutch national newspapers and international academic papers, three futurity frames were found regarding the role of different types of plastics in a linear economy, a circular economy, or an economy in transition. (1) In newspapers and academic sources, traditional plastics were considered part of a linear economy. (2) In both sources, all sorts of actors saw a future for plastics with improved material properties in a transition toward a circular economy, but in combination with a change in consumer behavior and waste management systems. (3) In both academic journals and newspapers, a role for plastics was envisioned in a future circular economy. However, in academic journals, the discussions focused mainly on the improvement of alternative forms of plastics such as biobased and/or biodegradable, whereas, in newspapers, recycling traditional plastics was emphasized. These findings indicate that a transition to a more circular economy may accelerate if both the closing-the-loop argument and the argument for technological innovations for biobased and biodegradable products receive equal attention in newspapers and academic journals, and are taken more into account in a societal future vision for the circular economy.}, - langid = {english}, - keywords = {Circular economy,Framing,Futurity framing,Packaging,Plastic}, - file = {/Users/fabio/Zotero/storage/D7QFBHSC/Colijn et al_2022_Science and media framing of the future of plastics in relation to.pdf;/Users/fabio/Zotero/storage/SS3X2WDE/Colijn et al_2022_Science and media framing of the future of plastics in relation to.pdf;/Users/fabio/Zotero/storage/HQJH5KM5/S0959652622030530.html} -} - -@article{colladoMETODOLOGIADELAINVESTIGACION, - title = {{METODOLOG\'IA DELA INVESTIGACI\'ON}}, - author = {Collado, Carlos Fern{\'a}ndez and Lucio, Pilar Baptista}, - langid = {spanish}, - file = {/Users/fabio/Zotero/storage/82A26553/Collado y Lucio - METODOLOGÍA DELA INVESTIGACIÓN.pdf} -} - -@article{collardEconomieCirculaire2020, - title = {{L'\'economie circulaire}}, - author = {Collard, Fabienne}, - year = {2020}, - journal = {Courrier hebdomadaire du CRISP}, - volume = {2455--2456}, - number = {10-11}, - pages = {5--72}, - publisher = {{CRISP}}, - address = {{Bruxelles}}, - issn = {0008-9664}, - doi = {10.3917/cris.2455.0005}, - urldate = {2023-02-15}, - abstract = {L'\'economie circulaire est un mod\`ele \'economique et industriel qui vise \`a maintenir les produits, leurs composants et leurs mat\'eriaux en circulation le plus longtemps possible, tout en veillant \`a garantir la qualit\'e de leur utilisation. Ce mod\`ele s'oppose en cela \`a l'\'economie lin\'eaire, qui s'appuie sur le sch\'ema suivant : extraction des ressources, fabrication et utilisation de biens, production de d\'echets. C'est principalement au niveau de cette derni\`ere \'etape qu'\'economie circulaire et \'economie lin\'eaire s'opposent puisque, dans la premi\`ere, les d\'echets ou produits en fin de vie trouvent une nouvelle utilit\'e, tandis que, dans la seconde, ils sont tout simplement \'elimin\'es. Mais bien au-del\`a du seul recyclage, l'\'economie circulaire englobe l'ensemble des \'etapes du processus de production, de la phase de conception d'un produit jusqu'\`a celle de valorisation des d\'echets. Si le bien-fond\'e des principes qui sous-tendent l'\'economie circulaire est d\'efendu de plus en plus largement, y compris dans les discours politiques, leur concr\'etisation fait encore face \`a d'importants obstacles d'ordre technique ou r\'eglementaire. Cependant, cette probl\'ematique est d\'esormais mise en avant en raison des enjeux environnementaux qui entourent les mani\`eres de produire et de consommer et de l'urgence qui existe \`a y apporter une r\'eponse. Apr\`es avoir d\'ecrit les contours th\'eoriques de ce mod\`ele ainsi que les divers aspects de sa mise en pratique, ce Courrier hebdomadaire \'etudie les cadres r\'eglementaires visant \`a d\'evelopper l'\'economie circulaire en Europe, en Belgique et dans les trois R\'egions du pays (Wallonie, Bruxelles et Flandre). Il propose aussi un \'etat des lieux actuel de la mise en \oe uvre de l'\'economie circulaire en Belgique.}, - langid = {french}, - file = {/Users/fabio/Zotero/storage/95E4TC8R/revue-courrier-hebdomadaire-du-crisp-2020-10-page-5.html} -} - -@article{collinsIndustryCaseStudy2016, - title = {Industry Case Study: Rapid Prototype of Mountain Bike Frame Section}, - author = {Collins, Paul K. and Leen, Robert and Gibson, Ian}, - year = {2016}, - month = oct, - journal = {Virtual and Physical Prototyping}, - volume = {11}, - number = {4}, - pages = {295--303}, - publisher = {{Taylor and Francis Ltd.}}, - issn = {17452767}, - doi = {10.1080/17452759.2016.1222563}, - urldate = {2021-02-16}, - abstract = {The purpose of this study is to detail a virtual and physical prototyping process to overcome a design constraint in the mountain bike industry. Through a series of techniques, 3D scanning, developing detailed CAD models, then through additive manufacturing processes, a solution was developed. The challenge in the industry is the constant geometrical changes of components; the trend has been that bike cranks are becoming narrower due to biomechanical factors and tyres are becoming wider due to rider preferences and increased grip. This change in geometry results in metal tubes that can no longer be deformed without exceeding the minimum bend radius for the material. As such exceeding the minimum bend radius will induce early performance failure and geometrical (aesthetic) defects. The solution is an additive manufactured part that can be substituted into the process without disrupting the entire conventional build process of a customised bike build.}, - keywords = {3D printing,additive manufacturing,cycling,product development,Prototype} -} - -@article{Columbano2010, - title = {The Pedagogy of Using a {{RP}} Architectural Model}, - author = {Columbano, Alessandro and Dring, Michael}, - year = {2010}, - month = dec, - journal = {Virtual and Physical Prototyping}, - volume = {5}, - number = {4}, - pages = {195--200}, - issn = {1745-2759}, - doi = {10.1080/17452759.2010.528842}, - urldate = {2014-02-02}, - keywords = {architectural pedagogy,architecture model,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/PWUVW98W/Columbano, Dring - 2010 - The pedagogy of using a RP architectural model.pdf} -} - -@inproceedings{Comb1994, - title = {{{FDM Technology Process Improvements}}}, - booktitle = {Proceedings of {{Solid Freeform Fabrication Symposium}}}, - author = {Comb, James W and Priedeman, William R and Turley, Patrick W}, - year = {1994}, - pages = {42--49}, - address = {{Austin, Texas}}, - file = {/Users/fabio/Zotero/storage/ZE97Y72A/FDM Technology Process Improvements.pdf} -} - -@article{comimSustainabilityHumanDevelopment2022, - title = {Sustainability and {{Human Development Indicators}}: {{A Poset Analysis}}}, - author = {Comim, Flavio and Hirai, Tadashi}, - year = {2022}, - month = aug, - journal = {Ecological Economics}, - volume = {198}, - pages = {107470}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2022.107470}, - urldate = {2022-05-30} -} - -@misc{COMMUNICATIONCOMMISSIONEUROPEAN2015, - title = {{{COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT}}, {{THE COUNCIL}}, {{THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE AND THE COMMITTEE OF THE REGIONS Closing}} the Loop - {{An EU}} Action Plan for the {{Circular Economy}}}, - year = {2015}, - urldate = {2022-11-04}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/UKHK55WE/HTML.html} -} - -@article{compagnoniExtendedProducerResponsibility2022, - title = {Is {{Extended Producer Responsibility}} Living up to Expectations? {{A}} Systematic Literature Review Focusing on Electronic Waste}, - shorttitle = {Is {{Extended Producer Responsibility}} Living up to Expectations?}, - author = {Compagnoni, Marco}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {367}, - pages = {133101}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133101}, - urldate = {2022-08-05}, - abstract = {Extended Producer Responsibility (EPR) is an environmental policy principle conceived for the incorporation of total product life-cycle (PLC) costs into production and consumption decisions. Consequently, EPR is expected to enhance the circularity of the value chains affected by this regulation. The lack of comprehensive evaluations of EPR achievements hampers the possibility to assess the actual alignment of the policy impacts with Circular Economy (CE) objectives. This is true also in the context of electronic waste (WEEE), which has been prioritized by EPR regulations and scientific investigations. This paper provides the first systematic literature review aiming to comprehensively examine the outcomes of EPR implementation in the WEEE scope, by adopting a PLC perspective. The review highlights the accomplishment of important downstream goals of EPR on WEEE, such as the increase of waste collection rates and the development of stable waste management systems. On the other hand, the review highlights limited upstream effectiveness of the policy, which is due to the insufficient allocation of individual responsibility to electronics producers to systematically drive them towards eco-design strategies. Discrepancies between CE goals and EPR achievements and implementation are classified into seven areas, covering the entire PLC and also representing domains of policy recommendations. Finally, the paper identifies a number of future research directions that would support the alignment of EPR policies and CE objectives in the electronics value chain.}, - langid = {english}, - keywords = {Circular economy,Electronic waste,Extended producer responsibility,Policy evaluation,Product life-cycle,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/BSMS7C8I/Compagnoni_2022_Is Extended Producer Responsibility living up to expectations.pdf;/Users/fabio/Zotero/storage/58L5M762/S0959652622026907.html} -} - -@article{compagnucciLivingLabsUser2020, - ids = {compagnucci2020}, - title = {Living {{Labs}} and {{User Engagement}} for {{Innovation}} and {{Sustainability}}}, - author = {Compagnucci, Lorenzo and Spigarelli, Francesca and Coelho, Jos{\'e} and Duarte, Carlos}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125721}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125721}, - urldate = {2021-01-01}, - keywords = {Co-creation,Innovation}, - file = {/Users/fabio/Zotero/storage/FEEQL9QU/full-text.pdf} -} - -@article{Confente2020, - ids = {Confente2020a}, - title = {Marketing a New Generation of Bio-Plastics Products for a Circular Economy: {{The}} Role of Green Self-Identity, Self-Congruity, and Perceived Value}, - author = {Confente, Ilenia and Scarpi, Daniele and Russo, Ivan}, - year = {2020}, - month = may, - journal = {Journal of Business Research}, - volume = {112}, - pages = {431--439}, - publisher = {{Elsevier}}, - issn = {01482963}, - doi = {10.1016/j.jbusres.2019.10.030}, - urldate = {2022-01-04}, - abstract = {Bioplastics represent an innovation for replacing materials obtained from fossil fuels and could provide significant benefits to the environment. A new generation of bioplastic from urban waste is now technically feasible. This paper is among the first to assume the perspective of the consumers rather than the manufacturers in addressing what could lead to the market acceptance of this particular type of bioplastic. A conceptual model is developed addressing psychological drivers that could encourage consumers' transition from a linear to a circular economy, with the purpose of better understanding what drives consumers' intentions to switch to and purchase products obtained from organic waste. Specifically, we find that green self-identity positively impacts perceived value, leading to higher behavioral intention. In addition, the relationship is moderated by self-congruity but not by differences in product involvement.}, - keywords = {Bioplastic products,Circular economy,Green self-identity,Perceived value,Purchase intention,Self-congruity}, - file = {/Users/fabio/Zotero/storage/WBCTPDSZ/full-text.pdf} -} - -@article{Cong2017, - title = {Spatial Simulation and {{LCA}} Evaluation on the Plastic Waste Recycling System in {{Tianjin}}}, - author = {Cong, Richao and Matsumoto, Toru and Li, Wenchao and Xu, He and Hayashi, Takamasa and Wang, Changjun}, - year = {2017}, - month = oct, - journal = {Journal of Material Cycles and Waste Management}, - volume = {19}, - number = {4}, - pages = {1423--1436}, - issn = {1438-4957}, - doi = {10.1007/s10163-016-0538-4} -} - -@article{Congreve2019, - title = {Integrating Ecosystem Services into Environmental Decision-Making}, - author = {Congreve, Alina and Cross, Iain D.}, - editor = {Mukul, Sharif}, - year = {2019}, - month = mar, - journal = {Journal of Applied Ecology}, - volume = {56}, - number = {3}, - pages = {494--499}, - publisher = {{Blackwell Publishing Ltd}}, - issn = {13652664}, - doi = {10.1111/1365-2664.13341}, - urldate = {2021-04-21}, - keywords = {decision-making,ecosystem services,environmental management,environmental policy,freshwater,multiple benefits,natural capital,toolkits}, - file = {/Users/fabio/Zotero/storage/WU9V5FVG/Congreve, Cross - 2019 - Integrating ecosystem services into environmental decision-making.pdf} -} - -@article{congReviewEcosystemServices2021, - title = {Review of Ecosystem Services in a Bio-Based Circular Economy and Governance Mechanisms}, - author = {Cong, Rong-Gang and Thomsen, Marianne}, - year = {2021}, - month = aug, - journal = {Ecosystem Services}, - volume = {50}, - pages = {101298}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101298}, - urldate = {2021-06-10} -} - -@article{Conlon2020, - title = {Adaptive Injustice: {{Responsibility}} to Act in the Plastics Economy}, - author = {Conlon, Katie}, - year = {2020}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {153}, - pages = {104563}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104563}, - file = {/Users/fabio/Zotero/storage/DU2DERGE/Adaptive injustice- Responsibility to act in the plastics economy.pdf} -} - -@article{Conn2018, - title = {The Growing Importance of Research Methods in Innovation Management Research: {{A}} Note from the 2018 {{ISPIM Innovation Conference}}}, - author = {Conn, Steffen and Ritala, Paavo}, - year = {2018}, - month = sep, - journal = {Technovation}, - issn = {01664972}, - doi = {10.1016/j.technovation.2018.09.001} -} - -@article{Conner2014, - title = {Making Sense of 3-{{D}} Printing: {{Creating}} a Map of Additive Manufacturing Products and Services}, - author = {Conner, Brett P. and Manogharan, Guha P. and Martof, Ashley N. and Rodomsky, Lauren M. and Rodomsky, Caitlyn M. and Jordan, Dakesha C. and Limperos, James W.}, - year = {2014}, - journal = {Additive Manufacturing}, - volume = {1--4}, - pages = {64--76}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2014.08.005}, - abstract = {Given the attention around additive manufacturing (AM), organizations want to know if their products should be fabricated using AM. To facilitate product development decisions, a reference system is shown describing the key attributes of a product from a manufacturability stand- point: complexity, customization, and production volume. Complexity and customization scales enable the grouping of products into regions of the map with common levels of the three attributes. A geometric complexity factor developed for cast parts is modified for a more general application. Parts with varying geometric complexity are then analyzed and mapped into regions of the complexity, customization, and production volume model. A discrete set of customization levels are also introduced. Implications for product development and manufacturing business approaches are discussed}, - keywords = {3d printing,additive manufacturing,complexity,complexity factor,customization,features,geometry,part,product development,product mapping,stl,strategy,surface area,volume}, - file = {/Users/fabio/Zotero/storage/E7FJ63N8/Conner et al. - 2014 - Making sense of 3-D printing Creating a map of additive manufacturing products and services.pdf} -} - -@book{Consultation2020, - title = {Ecosystem for the {{Future}} of {{Europe}}}, - author = {Consultation, Stakeholder}, - year = {2020}, - doi = {10.2777/524268}, - isbn = {978-92-76-18991-6}, - file = {/Users/fabio/Zotero/storage/KATCNI67/A robust innovation ecosystem for the future of europe.pdf} -} - -@article{contesseUnravellingNonhumanAgency2021, - title = {Unravelling Non-Human Agency in Sustainability Transitions}, - author = {Contesse, Maria and Duncan, Jessica and Legun, Katharine and Klerkx, Laurens}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120634}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120634}, - urldate = {2021-02-14}, - file = {/Users/fabio/Zotero/storage/MBB94G9I/full-text.pdf} -} - -@article{cooganPredictionInterlayerStrength2020, - title = {Prediction of {{Interlayer Strength}} in {{Material Extrusion Additive Manufacturing}}}, - author = {Coogan, Timothy J and O Kazmer, David}, - year = {2020}, - month = jun, - journal = {Additive Manufacturing}, - pages = {101368}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101368}, - urldate = {2020-06-07} -} - -@article{cookPlasticWasteReprocessing2023, - title = {Plastic Waste Reprocessing for Circular Economy: {{A}} Systematic Scoping Review of Risks to Occupational and Public Health from Legacy Substances and Extrusion}, - shorttitle = {Plastic Waste Reprocessing for Circular Economy}, - author = {Cook, Ed and Derks, Michiel and Velis, Costas A.}, - year = {2023}, - month = feb, - journal = {Science of The Total Environment}, - volume = {859}, - pages = {160385}, - issn = {0048-9697}, - doi = {10.1016/j.scitotenv.2022.160385}, - urldate = {2023-08-21}, - abstract = {The global plastics reprocessing sector is likely expand as the circular economy becomes more established and efforts to curb plastic pollution increase. Via a critical systematic scoping review (PRISMA-ScR), we focused on two critical challenges for occupational and public health that will require consideration along with this expansion: (1) Legacy contamination in secondary plastics, addressing the risk of materials and substances being inherited from the previous use and carried (circulated or transferred) through into new products when reprocessed material enters its subsequent use phase (recycled, secondary plastic); and, (2) Extrusion of secondary plastics during the final stage of conventional mechanical reprocessing. Based on selected literature, we semi-quantitatively assessed nine risk scenarios and ranked them according to the comparative magnitude of risk to human health. Our analysis highlights that despite stringent regulation, industrial diligence and enforcement, occasionally small amounts of potentially hazardous substances contained in waste plastics are able to pass through established safeguards and re-enter (cascade into) the next use phase (product cycle) after being recycled. Although many of these `inherited' chemical substances are present at concentrations unlikely to pose a serious and imminent threat, their existence may indicate a wider or possible increase in pollution dispersion. Our assessment indicates that the highest risk results from exposure to these substances during extrusion by mechanical reprocessors in contexts where only passive ventilation, dilution and dispersion are used as control measures. Our work sets the basis to inform improved future risk management protocols for a non-polluting circular economy for plastics.}, - keywords = {Circular economy,Global South,Health and safety,Plastic,Resource recovery,Solid waste}, - file = {/Users/fabio/Zotero/storage/525VTFI6/Cook et al_2023_Plastic waste reprocessing for circular economy.pdf;/Users/fabio/Zotero/storage/GBIES9M4/S0048969722074873.html} -} - -@article{cookRoleEcosystemServices2023, - title = {The Role of Ecosystem Services in the Doughnut Economy \textendash{} {{The}} Example of Whale Ecosystem Services in {{Disko Bay}}, {{Greenland}}}, - author = {Cook, David and Dav{\'i}{\dh}sd{\'o}ttir, Brynhildur and Malinauskaite, Laura}, - year = {2023}, - month = oct, - journal = {Ecosystem Services}, - volume = {63}, - pages = {101552}, - issn = {2212-0416}, - doi = {10.1016/j.ecoser.2023.101552}, - urldate = {2023-08-31}, - abstract = {The doughnut economy framework has been increasingly advocated by academics, governance institutions and policy-makers as a tool for delivering economies that provide a social foundation for all people, are safe and socially just, and respect planetary boundaries. Thus far, the role of ecosystem services (ES) in contributing to the doughnut economy's ambitions has been underexplored. This is surprising considering the wealth of ES literature addressing the theoretical components of `a good life' and relationships between social-ecological systems (SES), resource use and human well-being. Two contributions to the literature are made by this study: (1) a generalised model is outlined linking natural capital to ES to the ecological ceilings and human needs of the doughnut economy's framework, and (2) an illustrative case study of whale ES in Disko Bay, Greenland is provided to demonstrate linkages between ES and the doughnut economy's framework. The findings are based on 19 interviews with representative stakeholders in August 2019 and observational data gathered by the researchers. Although the case study is a simplification of the complexity of SES, it nevertheless reveals several of the key contributions made by whale ES to a mixed economy, especially reduced pressures on the ecological ceilings linked to biodiversity loss and climate change, and a positive contribution to the human needs of food, health, income and work, and social equity. The case study stimulates a discussion that reflects on the limited recognition of the role of cultural ES in the doughnut economy's conceptualisation, evidence of social-ecological trade-offs and complexities. These include some increased pressures caused by whale ES on ecological ceilings and tensions between the human needs, and multi-level governance challenges in operationalising the doughnut economy.}, - keywords = {Ecological ceilings,Economic prosperity,Economic well-being,Ecosystem services,Social foundation}, - file = {/Users/fabio/Zotero/storage/PTP8GPAQ/S2212041623000451.html} -} - -@article{Cooper2015, - title = {The {{Environmental Impacts}} of {{Reuse}}: {{A Review}}}, - author = {Cooper, Daniel R. and Gutowski, Timothy G.}, - year = {2015}, - journal = {Journal of Industrial Ecology}, - volume = {00}, - number = {0}, - pages = {1--19}, - issn = {15309290}, - doi = {10.1111/jiec.12388}, - keywords = {Dematerialization,Energy,Environmental impact,Materials efficiency,Remanufacturing,Reuse}, - file = {/Users/fabio/Zotero/storage/YIKYIX9Y/The Environmental Impacts of Reuse A Review.pdf} -} - -@article{Cooper2019, - title = {Pitfalls of Personality Theory}, - author = {Cooper, Colin}, - year = {2019}, - month = dec, - journal = {Personality and Individual Differences}, - volume = {151}, - pages = {109551}, - issn = {01918869}, - doi = {10.1016/j.paid.2019.109551} -} - -@article{Cop21, - title = {Paris {{Agreement}}}, - author = {{United Nations/Framework Convention on Climate Change}}, - year = {2015}, - journal = {21st Conference of the Parties}, - eprint = {1011.1669v3}, - pages = {3}, - issn = {1098-6596}, - doi = {FCCC/CP/2015/L.9}, - abstract = {In pursuit of the objective of the Convention, and being guided by its principles, including the principle of equity and common but differentiated responsibilities and respective capabilities, in the light of different national circumstances, Recognizing the need for an effective and progressive response to the urgent threat of climate change on the basis of the best available scientific knowledge, Also recognizing the specific needs and special circumstances of developing country Parties, especially those that are particularly vulnerable to the adverse effects of climate change, as provided for in the Convention, Taking full account of the specific needs and special situations of the least developed countries with regard to funding and transfer of technology, Recognizing that Parties may be affected not only by climate change, but also by the impacts of the measures taken in response to it, Emphasizing the intrinsic relationship that climate change actions, responses and impacts have with equitable access to sustainable development and eradication of poverty, Recognizing the fundamental priority of safeguarding food security and ending hunger, and the particular vulnerabilities of food production systems to the adverse impacts of climate change, Taking into account the imperatives of a just transition of the workforce and the creation of decent work and quality jobs in accordance with nationally defined development priorities, Acknowledging that climate change is a common concern of humankind, Parties should, when taking action to address climate change, respect, promote and consider their respective obligations on human rights, the right to health, the rights of indigenous peoples, local communities, migrants, children, persons with disabilities and people in vulnerable situations and the right to development, as well as gender equality, empowerment of women and intergenerational equity, Recognizing the importance of the conservation and enhancement, as appropriate, of sinks and reservoirs of the greenhouse gases referred to in the Convention, Noting the importance of ensuring the integrity of all ecosystems, including oceans, and the protection of biodiversity, recognized by some cultures as Mother Earth, and noting the importance for some of the concept of " climate justice " , when taking action to address climate change, Affirming the importance of education, training, public awareness, public participation, public access to information and cooperation at all levels on the matters addressed in this Agreement, Recognizing the importance of the engagements of all levels of government and various actors, in accordance with respective national legislations of Parties, in addressing climate change,}, - archiveprefix = {arxiv}, - isbn = {3981058208}, - pmid = {25246403}, - file = {/Users/fabio/Zotero/storage/BH67QZHV/Paris Agreement.pdf} -} - -@article{Corallo2013c, - title = {Methodology for {{User-Centered Innovation}} in {{Industrial Living Lab}}}, - author = {Corallo, Angelo and Latino, Maria Elena and Neglia, Grazia}, - year = {2013}, - journal = {ISRN Industrial Engineering}, - volume = {2013}, - pages = {1--8}, - issn = {2314-6435}, - doi = {10.1155/2013/131596} -} - -@inproceedings{Corapi2019, - title = {Characterization of a Polylactic Acid ({{PLA}}) Produced by {{Fused Deposition Modeling}} ({{FDM}}) Technology}, - booktitle = {Procedia {{Structural Integrity}}}, - author = {Corapi, Domenico and Morettini, Giulia and Pascoletti, Giulia and Zitelli, Chiara}, - year = {2019}, - month = jan, - volume = {24}, - pages = {289--295}, - publisher = {{Elsevier B.V.}}, - issn = {24523216}, - doi = {10.1016/j.prostr.2020.02.026}, - urldate = {2020-12-03}, - abstract = {PLA is an organic polymer that lends itself to multiple applications. It is commonly used in fused deposition modeling technology (FDM), which operates by depositing successive layers of material. The material extrusion, in the form of a wire, follows an imposed pattern, which influences the static and dynamic behavior of the final component. In the literature there are many works concerning the mechanical characterization of the PLA but, due to the natural orthotropy of the FDM process and, above all, to the ascertained influence of the particular technical system with which the operations are performed, it is necessary to characterize the extruded material through different metrological techniques. In order to allow the use of this technology for structural elements production, in the present work, quasi-static tests have been carried out to characterize the material and the process considering the three spatial growth directions (x, y and z). In particular, uniaxial tensile tests were performed for the determination of mechanical strength, modulus of elasticity and percentage elongation.}, - keywords = {3D Printing,Acrylonitrile,Butadiene styrenepolylactic acid,FDM,Rapid prototyping,Tensile strength}, - file = {/Users/fabio/Zotero/storage/5TKAHFIM/full-text.pdf} -} - -@article{corboCoopetitionInnovationReview2022, - title = {Coopetition and Innovation: {{A}} Review and Research Agenda}, - shorttitle = {Coopetition and Innovation}, - author = {Corbo, Leonardo and Kraus, Sascha and Vla{\v c}i{\'c}, Bo{\v z}idar and Dabi{\'c}, Marina and Caputo, Andrea and Pellegrini, Massimiliano M.}, - year = {2022}, - month = sep, - journal = {Technovation}, - pages = {102624}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2022.102624}, - urldate = {2022-09-18}, - abstract = {The proliferation of research on innovation-related coopetition calls for a more unified understanding of the current state of knowledge in this domain. Previous reviews on coopetition, however, fall short when it comes to putting innovation at the core of their analysis, often relegating the topic to one of the research themes/dimensions of coopetition, or considering innovation to be a promising area for future research. We fill this gap by systematically reviewing two decades of research on coopetition and innovation. We apply Multiple Correspondence Analysis (MCA) methods to a sample of 128 articles from academic journals published in the field of coopetition and innovation, revealing the major research themes, the theories and methods used, the levels of analysis, and the contexts explored. The holistic representation of coopetition and innovation research hinges upon multiple theories, including the resource-based view, the knowledge-based view, the network view, and the behavioral view, while predominantly focusing on strategy; innovativeness; value creation, appropriation and performance; appropriability and protection; and organizational culture. Given the increasing scholarly interest in both coopetition and innovation, this study proposes fruitful research avenues, and discusses their implications for both theory and practice.}, - langid = {english}, - keywords = {Coopetition,Innovation,Multiple correspondence analysis,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/WFXK4M4Z/S0166497222001717.html} -} - -@article{cordellaAddressingSustainableDevelopment2023, - title = {Addressing Sustainable Development Goals in Life Cycle Sustainable Assessment: {{Synergies}}, Challenges and Needs}, - shorttitle = {Addressing Sustainable Development Goals in Life Cycle Sustainable Assessment}, - author = {Cordella, Mauro and Horn, Rafael and Hong, Sun Hea and Bianchi, Marco and Isasa, Marina and Harmens, Rosan and Sonderegger, Thomas and Pihkola, Hanna}, - year = {2023}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {415}, - pages = {137719}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137719}, - urldate = {2023-07-06}, - abstract = {The assessment and monitoring of society's progress towards sustainability requires a multidisciplinary approach in which tools, indicators and data are integrated across existing frameworks. In this sense, the United Nations' Sustainable Development Goals (SDGs) and the life cycle sustainability assessment (LCSA) framework introduced by UNEP/SETAC Life Cycle Initiative are two of the most important references used by practitioners to assess sustainability at territorial level, in the first case, and at process, product, or organizational level, in the second case. However, due to the different scopes of SDGs and LCSA, the integration between the two tools has been limited so far and the synergies mostly remained untapped. Building on LCSA literature, and with the aid of text-mining analysis, this manuscript analyzes how linkages between product LCSA and SDGs have been and could be addressed, also highlighting key challenges and needs for connecting LCSA with SDGs in a coherent and operational way. The paper highlights that, although SDGs and LCSA are complementary and could inform and feed each other, as of today there is no harmonized way to set up and analyze the connections between the two and progress still seems far from reaching general consensus. Further research is needed to consistently link LCSA metrics to SDGs goals and thus ensure that improved products sustainability effectively contributes to progress towards more sustainable territories.}, - langid = {english}, - keywords = {Product LCSA,Research needs,SDGs,Sustainability,Synergies,Text-mining}, - file = {/Users/fabio/Zotero/storage/ARP5KGGQ/Cordella et al. - 2023 - Addressing sustainable development goals in life c.pdf;/Users/fabio/Zotero/storage/WPNYEVHR/S0959652623018772.html} -} - -@article{cordierHowMuchInnovation2019, - title = {How Much Innovation Is Needed to Protect the Ocean from Plastic Contamination?}, - author = {Cordier, Mateo and Uehara, Takuro}, - year = {2019}, - month = jun, - journal = {Science of The Total Environment}, - volume = {670}, - pages = {789--799}, - publisher = {{Elsevier}}, - issn = {0048-9697}, - doi = {10.1016/J.SCITOTENV.2019.03.258}, - urldate = {2021-07-21}, - abstract = {Plastics are non-biodegradable, and increasing accumulation of plastic debris in the ocean is a major cause for concern. The World Economic Forum, Ellen MacArthur Foundation, and McKinsey \& Company claimed in 2016 that technological innovations can solve the plastic problem. Such a claim raises an as yet unanswered question: how much technological innovation is needed and is it economically feasible? We offer answers to this question via a system dynamics model that we developed to simulate different scenarios aimed at controlling plastic debris entering the global ocean. Our results show that ocean cleanup technologies could achieve a 25\% reduction in the level of plastic debris in the ocean below 2010 levels in 2030. However, this would require removing 15\% of the stock of plastic debris from the ocean every year over the period 2020\textendash 2030, which equates to 135 million tons of plastic in total (metric tons). The implementation cost of such an ocean cleanup effort would amount to \texteuro 492 billion-\texteuro 708 billion, which represents 0.7\%\textendash 1.0\% of the world GDP in 2017 \textendash{} this calculation is based on unit costs in \texteuro/kg estimated in The Ocean Cleanup project feasibility study. The Ocean Cleanup project alone is designed to collect 70,320 tons of plastic debris over a 10 year period. Removing 135 million tons of plastic debris would require investing in 1924 similar cleanup projects. These results help to assess the economic feasibility of removing such large volume of plastics. Moreover, our results provide quantitative confirmation that technological solutions alone are not sufficient to solve plastic pollution issues. A portfolio of diverse solutions \textendash{} not only technological ones \textendash{} is likely to have greater technical, political and economic feasibility. Our model shows that such a combined portfolio implemented over the period 2020\textendash 2030 could reduce the ocean plastic stock to 2013 levels (94 million tons) by 2030.}, - keywords = {Decoupling GDP,Marine ecosystem,Marine litter,Ocean cleanup,System dynamics,Waste management} -} - -@article{corletwalkerWelfareSystemsEconomic2021, - title = {Welfare Systems without Economic Growth: {{A}} Review of the Challenges and next Steps for the Field}, - author = {Corlet Walker, Christine and Druckman, Angela and Jackson, Tim}, - year = {2021}, - month = aug, - journal = {Ecological Economics}, - volume = {186}, - pages = {107066}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107066}, - urldate = {2021-04-29}, - file = {/Users/fabio/Zotero/storage/9VNWFP38/full-text.pdf} -} - -@article{cornejo-dottoneGreenhouseGasCycling2020, - title = {Greenhouse Gas Cycling by the Plastisphere: {{The}} Sleeper Issue of Plastic Pollution}, - shorttitle = {Greenhouse Gas Cycling by the Plastisphere}, - author = {{Cornejo-D'Ottone}, Marcela and Molina, Ver{\'o}nica and Pavez, Javiera and Silva, Nelson}, - year = {2020}, - month = may, - journal = {Chemosphere}, - volume = {246}, - pages = {125709}, - issn = {0045-6535}, - doi = {10.1016/j.chemosphere.2019.125709}, - urldate = {2023-05-12}, - abstract = {Plastic is an allochthonous material to marine ecosystems but is rapidly colonized by marine microbial communities, with an as yet unclear contribution to biogeochemical cycles. In this study, we investigated the influence of an active microbial community grown on microplastic particles (the plastisphere) on CO2 and N2O recycling and its potential role in greenhouse gas inventories and air-sea exchange. Microplastics were collected during two cruises (Cimar 21 and FIP Montes Submarinos) from the surface layer (5~m depth) from several contrasting trophic regions of the South Pacific Ocean, i.e., from a transition zone off the eutrophic coastal upwelling of Chile, to a mesotrophic transition area of oceanic seamounts and, finally, to an oligotrophic zone in the South Pacific Subtropical Gyre. . Experiments were carried out onboard to evaluate CO2 and N2O production/consumption by the plastisphere. The active microbial community and its specific quantification were determined for Cimar 21 using iTag 16~S rRNA. The experiments showed that the plastisphere generally contributed to CO2 and N2O production/consumption, with rates ranging from~-20.5 (consumption) to~+4.5 (production) {$\mu$}mol/m2/d. The seamounts and the transition zone presented the highest production/consumption rates. The experiments performed in the two seamount stations showed that production and consumption of CO2 were related to the environmental nutrient concentration. Both stations presented N2O consumption that was associated with the high nitrogen deficit of the subantarctic water mass. The transition zone presented CO2 and N2O production in a plastisphere dominated by heterotrophic communities. The plastisphere in oligotrophic waters was diverse and active. The experiments, however, presented low or no production of greenhouse gases. Our results show a contribution of CO2 and N2O to the global gas surface inventories and air-sea exchange is lower than 1\% of the global sources. These results highlight different critical impacts of plastic pollution on the environment that have, until now, not been considered.}, - langid = {english}, - keywords = {Greenhouse gas,Plastic pollution,Plastisphere}, - file = {/Users/fabio/Zotero/storage/57PBQ97K/Cornejo-D’Ottone et al. - 2020 - Greenhouse gas cycling by the plastisphere The sl.pdf;/Users/fabio/Zotero/storage/82U8PYTA/S0045653519329509.html} -} - -@article{corradiniDesignTestingDigital2022, - title = {Design and Testing of a Digital Twin for Monitoring and Quality Assessment of Material Extrusion Process}, - author = {Corradini, Fabio and Silvestri, Marco}, - year = {2022}, - month = mar, - journal = {Additive Manufacturing}, - volume = {51}, - pages = {102633}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102633}, - urldate = {2022-02-09} -} - -@article{correaAnalysisInsertionSustainability2020, - title = {An Analysis of the Insertion of Sustainability Elements in Undergraduate Design Courses Offered by {{Brazilian}} Higher Education Institutions: {{An}} Exploratory Study}, - author = {Corr{\^e}a, Matheus and Lima, Brenno Vinicius de Medeiros and Martins, Vitor William Batista and Rampasso, Izabela Simon and Anholon, Rosley and Quelhas, Osvaldo L.G. and Leal Filho, Walter}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {272}, - pages = {122733}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122733}, - urldate = {2020-07-16} -} - -@article{Corsini2019, - title = {Using Digital Fabrication Tools to Provide Humanitarian and Development Aid in Low-Resource Settings}, - author = {Corsini, Lucia and {Aranda-jan}, Clara B and Moultrie, James}, - year = {2019}, - journal = {Technology in Society}, - number = {September 2018}, - pages = {1--12}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.02.003}, - abstract = {Publication date: Available online 1 March 2019Source: Technology in SocietyAuthor(s): Lucia Corsini, Clara B. Aranda-Jan, James Moultrie}, - file = {/Users/fabio/Zotero/storage/D3PKYFTF/Using digital fabrication tools to provide humanitarian and development aid in low-resource settings.pdf} -} - -@article{corsiniImpact3DPrinting2020, - title = {The Impact of {{3D}} Printing on the Humanitarian Supply Chain}, - author = {Corsini, Lucia and {Aranda-Jan}, Clara Beatriz and Moultrie, James}, - year = {2020}, - month = oct, - journal = {Production Planning \& Control}, - pages = {1--13}, - publisher = {{Taylor and Francis Ltd.}}, - issn = {0953-7287}, - doi = {10.1080/09537287.2020.1834130}, - urldate = {2020-12-18}, - abstract = {Additive Manufacturing or 3 D printing is radically changing the way products are designed and manufactured. The humanitarian sector has started exploring how 3 D printing can help match supply with the global rise in humanitarian needs. However, there has been very little academic research in the field. This study aims to bridge this gap by reviewing twelve case studies of 3 D printed products to examine the effects of 3 D printing on the humanitarian supply chain. The findings reveal four supply chain archetypes, which demonstrate that 3 D printing is impacting the humanitarian supply chain with respects to networks, governance, processes and products. We compare the benefits and challenges of these archetypes to contest that 3 D printing will not necessarily simplify and shorten the supply chain. Instead, we suggest the need for a holistic supply chain approach that includes the local production of 3 D printers and filament, alongside local design and manufacture. This much-needed study provides the foundations for future academic research and offers relevant guidance for practitioners using 3 D printing in the humanitarian sector.}, - keywords = {3D printing,additive manufacturing,development,humanitarian,supply chain}, - file = {/Users/fabio/Zotero/storage/333TLM6A/full-text.pdf} -} - -@article{corvellecCritiquesCircularEconomy2021, - title = {Critiques of the Circular Economy}, - author = {Corvellec, Herv{\'e} and Stowell, Alison F. and Johansson, Nils}, - year = {2021}, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13187}, - urldate = {2022-01-25}, - abstract = {This paper presents a reasoned account of the critiques addressed to the circular economy and circular business models. These critiques claim that the circular economy has diffused limits, unclear theoretical grounds, and that its implementation faces structural obstacles. Circular economy is based on an ideological agenda dominated by technical and economic accounts, which brings uncertain contributions to sustainability and depoliticizes sustainable growth. Bringing together these critiques demonstrates that the circular economy is far from being as promising as its advocates claim it to be. Circularity emerges instead as a theoretically, practically, and ideologically questionable notion. The paper concludes by proposing critical issues that need to be addressed if the circular economy and its business models are to open routes for more sustainable economic development.}, - keywords = {circular business models,circular economy,critique,industrial ecology,review,sustainability}, - file = {/Users/fabio/Zotero/storage/R7VQ6QZY/full-text.pdf} -} - -@article{Cosgrave2013b, - title = {Living Labs, Innovation Districts and Information Marketplaces: {{A}} Systems Approach for Smart Cities}, - author = {Cosgrave, Ellie and Arbuthnot, Kate and Tryfonas, Theo}, - year = {2013}, - journal = {Procedia Computer Science}, - volume = {16}, - number = {Cser 13}, - pages = {668--677}, - issn = {18770509}, - doi = {10.1016/j.procs.2013.01.070}, - abstract = {In the past few years many groundbreaking promises have been made about the potential of the Smart City. The future of cities relies perceivably on ubiquitous sensing, and anytime-anywhere information access and control. However, city leaders are still struggling to identify the quantifiable sources of value that novel ICT can generate. Current Smart City investment is characterized by relatively small demonstrators that often lack the scalability to have real and long lasting impacts on the economy. In this paper we adopt the view of a Smart City as an information marketplace and look at how we might use existing and tested concepts of fostering technology innovation to support city leaders in navigating this unknown territory. In particular we use systems thinking to scope how the concepts of the Living Lab and the nnovation Distric can work together in a complementary fashion to create a candidate model for the implementation of the Smart City. ?? 2013 The authors. Published by Elsevier B.V.}, - keywords = {Innovation district,Living lab,Smart city,Value chain} -} - -@article{coskunMakeItCircular2022, - title = {Make It a Circular City: {{Experiences}} and Challenges from {{European}} Cities Striving for Sustainability through Promoting Circular Making}, - shorttitle = {Make It a Circular City}, - author = {Coskun, Aykut and Metta, Julie and Bak{\i}rl{\i}o{\u g}lu, Yekta and {\c C}ay, Damla and Bachus, Kris}, - year = {2022}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {185}, - pages = {106495}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106495}, - urldate = {2022-08-11}, - abstract = {A growing number of cities are deploying circular economy practices to contribute to the Sustainable Development Goals (SDGs). Makerspaces are community-driven initiatives enabling the collaboration between a city's diverse stakeholders in that objective. They can enhance the citizens' contribution to circularity by engaging them in circular ''making'' activities (e.g., reuse, repair, sharing) and by providing them with novel means, skills, and knowledge in these activities. However, cities face various challenges during the process of engaging citizens to create a vibrant circular city. Based on an in-depth analysis of experiences and challenges in seven European cities, which attempted to embrace the SDGs through circular making activities, this paper presents ten engagement-related challenges and five strategies to overcome them. Integrating these challenges and strategies in a strategy-challenge matrix offers several recommendations for cities striving to address SDGs through establishing and maintaining circular makerspaces.}, - langid = {english}, - keywords = {Circular economy,Circular makerspace,Citizen engagement,Maker movement,Stakeholder strategies,Sustainable development goals,Vibrant ecosystem}, - file = {/Users/fabio/Zotero/storage/HY47MT68/Coskun et al_2022_Make it a circular city.pdf;/Users/fabio/Zotero/storage/9URACFFB/S092134492200338X.html} -} - -@techreport{Costanza1991, - title = {Ecological Economics: A Research Agenda}, - author = {Costanza, Robert}, - year = {1991}, - journal = {Structural Change and Economic Dynamics}, - volume = {2}, - number = {2}, - urldate = {2021-04-13}, - abstract = {Ecological economics is a new transdisciplinary approach that looks at the full range of interrelationships between ecological and economic systems. This breadth is essential if we are to understand and manage our planet wisely in the face of mounting interdependent global environmental, population, and economic development problems. This paper summarizes the state and goals of this emerging transdisciplinary field, particularly as regards issues of sustainability, and provides a working agenda for research. Assuring sustainability of ecological economic systems depends on our ability to make local and short-term goals and incentives (like local economic growth and private interests) consistent with global and long-term goals (like sustainability and global welfare). This requires: (1) establishing a hierarchy of goals for local, national, and global ecological economic planning and management; (2) developing better regional and global ecological economic modelling capabilities to allow us to see the range of possible outcomes of our current activities; (3) adjusting prices and other local incentives to reflect long run, global ecological costs, including uncertainty; and (4) developing policies that lead to no further decline in the stock of natural capital. 1. AN ECOLOGICAL ECONOMIC WORLD VIEW There is increasing awareness that our global ecological life support system is endangered, and decisions made on the basis of local, narrow, short-term criteria can produce disastrous results globally and in the long run. There is also increasing awareness that traditional economic and ecological models and concepts fall short in their ability to deal with these problems. Ecological economics is a new transdisciplinary field of study that addresses the relationships between ecosystems and economic systems in the broadest sense. These relationships are central to many of humanity's current problems and to building a sustainable future, but are not well covered by any existing scientific discipline. By transdisciplinary we mean that ecological economics goes beyond the normal conceptions of scientific disciplines and tries to integrate and synthesize many different disciplinary perspectives. It is not a new discipline, but rather a new pluralistic way of looking at problems. One way it does this is by focusing more directly on the problems, rather than on the particular intellectual tools and models used to solve them, and by ignoring arbitrary intellectual turf boundaries.}, - file = {/Users/fabio/Zotero/storage/EAT4S5R7/full-text.pdf} -} - -@article{COSTANZA1992, - ids = {costanza1992}, - title = {Natural {{Capital}} and {{Sustainable Development}}}, - author = {COSTANZA, {\relax ROBERT} and DALY, HERMAN E.}, - year = {1992}, - month = mar, - journal = {Conservation Biology}, - volume = {6}, - number = {1}, - pages = {37--46}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {15231739}, - doi = {10.1046/j.1523-1739.1992.610037.x}, - urldate = {2021-04-23}, - abstract = {Abstract: A minimum necessary condition for sustainability is the maintenance of the total natural capital stock at or above the current level. While a lower stock of natural capital may be sustainable, society can allow no further decline in natural capital given the large uncertainty and the dire consequences of guessing wrong. This ``constancy of total natural capital'' rule can thus be seen as a prudent minimum condition for assuring sustainability, to be relaxed only when solid evidence can be offered that it is safe to do so. We discuss methodological issues concerning the degree of substitutability of manufactured for natural capital, quantifying ecosystem services and natural capital, and the role of the discount rate in valuing natural capital. We differentiate the concepts of growth (material increase in size) and development (improvement in organization without size change). Given these definitions, growth cannot the sustainable indefinitely on a finite planet. Development may be sustainable, but even this aspect of change may have some limits. One problem is that current measures of economic well-being at the macro level (i.e., the Gross National Product) measure mainly growth, or at best conflate growth and development. This urgently requires revision. Finally, we suggest some principles of sustainable development and describe why maintaining natural capital stocks is a prudent and achievable policy for insuring sustainable development. There is disagreement between technological optimists (who see technical progress as eliminating all resource constraints to growth and development) and technological skeptics (who do not see as much scope for this approach and fear irreversible use of resources and damage to natural capital). By maintaining natural capital stocks (preferably by using a natural capital depletion tax), we can satisfy both the skeptics (since resources will be conserved for future generations) and the optimists (since this will raise the price of natural capital depletion and more rapidly induce the technical change they predict). Copyright \textcopyright{} 1992, Wiley Blackwell. All rights reserved}, - file = {/Users/fabio/Zotero/storage/4ZJKLH3Z/full-text.pdf;/Users/fabio/Zotero/storage/FENY4BL3/Costanza y Daly - 1992 - Natural Capital and Sustainable Development.pdf} -} - -@article{Costanza1997, - title = {The Value of the World's Ecosystem Services and Natural Capital}, - author = {Costanza, Robert and D'Arge, Ralph and {de Groot}, Rudolf and Farber, Stephen and Grasso, Monica and Hannon, Bruce and Limburg, Karin and Naeem, Shahid and O'Neill, Robert V. and Paruelo, Jose and Raskin, Robert G. and Sutton, Paul and {van den Belt}, Marjan}, - year = {1997}, - month = may, - journal = {Nature}, - volume = {387}, - number = {6630}, - pages = {253--260}, - publisher = {{Nature Publishing Group}}, - issn = {0028-0836}, - doi = {10.1038/387253a0}, - urldate = {2021-04-13}, - abstract = {The services of ecological systems and the natural capital stocks that produce them are critical to the functioning of the Earth's life-support system. They contribute to human welfare, both directly and indirectly, and therefore represent part of the total economic value of the planet. We have estimated the current economic value of 17 ecosystem services for 18 biomes, based on published studies and a few original calculations. For the entire biosphere, the value (most of which in outside the market) in estimated to be in the range of US\$16-54 trillion (1012) per year, with in average of US\$33 trillion per year. Because of the nature of the uncertainties, thin must be considered a minimum estimate. Global gross national product total is around US\$18 trillion per year.}, - keywords = {Humanities and Social Sciences,multidisciplinary,Science}, - file = {/Users/fabio/Zotero/storage/W6T4FJY4/full-text.pdf} -} - -@book{Costanza2014, - title = {An {{Introduction}} to {{Ecological Economics}}}, - author = {Costanza, Robert and Cumberland, John H and Daly, Herman and Goodland, Robert and Norgaard, Richard B and Kubiszewski, Ida and Franco, Carol}, - year = {2014}, - journal = {An Introduction to Ecological Economics}, - doi = {10.1201/b17829}, - abstract = {From Empty-World Economics to Full-World Economics Ecological economics explores new ways of thinking about how we manage our lives and our planet to achieve a sustainable, equitable, and prosperous future. Ecological economics extends and integrates the study and management of both "nature's household" and "humankind's household"\textemdash An Introduction to Ecological Economics, Second Edition, the first update and expansion of this classic text in 15 years, describes new approaches to achieving a sustainable and desirable human presence on Earth. Written by the top experts in the field, it addresses the necessity for an innovative approach to integrated environmental, social, and economic analysis and management, and describes policies aimed at achieving our shared goals. Demands a Departure from Business as Usual The book begins with a description of prevailing interdependent environmental, economic, and social issues and their underlying causes, and offers guidance on designing policies and instruments capable of adequately coping with these problems. It documents the historical development of the disciplines of economics and ecology, and explores how they have evolved so differently from a shared conceptual base. Structured into four sections, it also presents various ideas and models in their proper chronological context, details the fundamental principles of ecological economics, and outlines prospects for the future. What's New in the Second Edition: Includes several new pieces and updates in each section Adds a series of independently authored "boxes" to expand and update information in the current text Addresses the historical development of economics and ecology and the recent progress in integrating the study of humans and the rest of nature Covers the basic concepts and applications of ecological economics in language accessible to a broad audience An Introduction to Ecological Economics, Second Edition can be used in an introductory undergraduate or graduate course; requires no prior knowledge of mathematics, economics, or ecology; provides a unified understanding of natural and human-dominated ecosystems; and reintegrates the market economy within society and the rest of nature.}, - isbn = {978-1-4200-1267-5}, - file = {/Users/fabio/Zotero/storage/C74KCGZC/Robert Costanza, John H Cumberland, Herman Daly, Robert Goodland, Richard B Norgaard, Ida Kubiszewski, Carol Franco - An Introduction to Ecological Economics, Second Edition (2014, CRC Press) - libgen.lc.pdf} -} - -@misc{Costanza2017, - title = {Twenty Years of Ecosystem Services: {{How}} Far Have We Come and How Far Do We Still Need to Go?}, - author = {Costanza, Robert and {de Groot}, Rudolf and Braat, Leon and Kubiszewski, Ida and Fioramonti, Lorenzo and Sutton, Paul and Farber, Steve and Grasso, Monica}, - year = {2017}, - month = dec, - journal = {Ecosystem Services}, - volume = {28}, - pages = {1--16}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.09.008}, - urldate = {2021-04-23}, - abstract = {It has been 20 years since two seminal publications about ecosystem services came out: an edited book by Gretchen Daily and an article in Nature by a group of ecologists and economists on the value of the world's ecosystem services. Both of these have been very highly cited and kicked off an explosion of research, policy, and applications of the idea, including the establishment of this journal. This article traces the history leading up to these publications and the subsequent debates, research, institutions, policies, on-the-ground actions, and controversies they triggered. It also explores what we have learned during this period about the key issues: from definitions to classification to valuation, from integrated modelling to public participation and communication, and the evolution of institutions and governance innovation. Finally, it provides recommendations for the future. In particular, it points to the weakness of the mainstream economic approaches to valuation, growth, and development. It concludes that the substantial contributions of ecosystem services to the sustainable wellbeing of humans and the rest of nature should be at the core of the fundamental change needed in economic theory and practice if we are to achieve a societal transformation to a sustainable and desirable future.}, - file = {/Users/fabio/Zotero/storage/Q7SMCBFN/Costanza et al. - 2017 - Twenty years of ecosystem services How far have we come and how far do we still need to go.pdf} -} - -@article{costanzaWhenBusinessCircular2023, - title = {When the Business Is Circular and Social: {{A}} Dynamic Grounded Analysis in the Clothing Recycle}, - shorttitle = {When the Business Is Circular and Social}, - author = {Costanza, Francesca}, - year = {2023}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {382}, - pages = {135216}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.135216}, - urldate = {2022-12-12}, - abstract = {Nowadays Social Entrepreneurship (or SE) and Circular Economy (or CE) are recognized as reference points for the definition of sustainable business models. However, management literature seems to privilege one of these paradigms at a time, neglecting their possible integration for business model innovation. This paper seeks to contribute to such literature gap by investigating the interplay between SE and CE and presenting a qualitative case study in the clothing recycle sector. By combining Gioia methodology and system dynamics, the study develops a research framework based on an interpretive, participative, and iterative approach. The emerging `dynamic grounded model' synthesizes the mutual reinforce of circular commercial business and social mission's features for the transition from non-profit organizations to social enterprises.}, - langid = {english}, - keywords = {Circular economy,Education,Gioia methodology,Recycle,Social entrepreneurship,System dynamics}, - file = {/Users/fabio/Zotero/storage/W2PJRW8K/Costanza_2023_When the business is circular and social.pdf;/Users/fabio/Zotero/storage/3K533WM3/S0959652622047904.html} -} - -@article{costanzoJournalPreproofResidual2020, - title = {Journal {{Pre-proof Residual}} Alignment and Its Effect on Weld Strength in Material-Extrusion {{3D-printing}} of Polylactic Acid {{Residual}} Alignment and Its Effect on Weld Strength in Material-Extrusion {{3D-printing}} of Polylactic Acid}, - author = {Costanzo, Andrea and Spotorno, Roberto and Virginia Candal, Mar{\'i}a and Mercedes Fern{\'a}ndezFern, Mar{\'i}a and M, Alejandro J and Graham, Richard and Cavallo, Dario and McIlroy, Claire and Mercedes Fern{\'a}ndez, Mar{\'i}a and M{\"u}ller, Alejandro J}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101415}, - publisher = {{Additive Manufacturing}}, - doi = {10.1016/j.addma.2020.101415}, - urldate = {2020-07-13}, - abstract = {Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid, {$<$}![CDATA[Additive Manufacturing]]{$>$} (2020), doi: https://doi. Abstract Gaining a molecular understanding of material extrusion (MatEx) 3D printing is crucial to predicting and controlling part properties. Here we report the direct observation of distinct birefringence localised to the weld regions between the printed filaments, indicating the presence of molecular orientation that is absent from the bulk of the filament. The value of birefringence at the weld increases at higher prints speeds and lower nozzle temperatures, and is found to be detrimental to the weld strength measured by tensile testing perpendicular to the print direction. We employ a molecularly-aware non-isothermal model of the MatEx flow and cooling process to predict the degree of alignment trapped in the weld at the glass transition. We find that the predicted residual alignment factor, \textasciimacron{} A, is linearly related to the extent of birefringence, {$\increment$}n. Thus, by combining experiments and molecular modelling, we show that weld strength is not limited by inter-diffusion, as commonly expected, but instead by the configuration of the entangled polymer network. We adapt the classic molecular interpretation of glassy polymer fracture to explain how the measured weld strength decreases with increasing print speed and decreasing nozzle temperature.}, - keywords = {Birefringence,Material Extrusion,Molecular Orientation,Polylactic acid,Weld Strength} -} - -@article{Coughlan2020, - title = {Trialling the Preparation for Reuse of Consumer {{ICT WEEE}} in {{Ireland}}}, - author = {Coughlan, Damian and Fitzpatrick, Colin}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {256}, - pages = {120512}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120512} -} - -@article{courbeDynamiqueAteliersFabrication2020, - title = {La Dynamique Des Ateliers de Fabrication Num\'erique En {{France}}.}, - author = {Courbe, Thomas}, - year = {2020}, - file = {/Users/fabio/Zotero/storage/ZSGRI6LA/dynamique-ateliers-de-fabrication-numerique-en-france-juin-2020.pdf} -} - -@article{courtialDynamicMoldingAdditive2022, - title = {Dynamic {{Molding}}: {{Additive}} Manufacturing in Partially Ordered System}, - author = {Courtial, Edwin-Joffrey and Colly, Arthur and Marquette, Christophe}, - year = {2022}, - month = mar, - journal = {Additive Manufacturing}, - volume = {51}, - pages = {102598}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102598}, - urldate = {2022-01-25} -} - -@article{Cowling2008, - title = {An Operational Model for Mainstreaming Ecosystem Services for Implementation}, - author = {Cowling, Richard M. and Egoh, Benis and Knight, Andrew T. and O'Farrell, Patrick J. and Reyers, Belinda and Rouget, Mathieu and Roux, Dirk J. and Welz, Adam and {Wilhelm-Rechman}, Angelika}, - year = {2008}, - month = jul, - journal = {Proceedings of the National Academy of Sciences of the United States of America}, - volume = {105}, - number = {28}, - pages = {9483--9488}, - issn = {00278424}, - doi = {10.1073/pnas.0706559105}, - urldate = {2021-04-21}, - abstract = {Research on ecosystem services has grown markedly in recent years. However, few studies are embedded in a social process designed to ensure effective management of ecosystem services. Most research has focused only on biophysical and valuation assessments of putative services. As a mission-oriented discipline, ecosystem service research should be user-inspired and user-useful, which will require that researchers respond to stakeholder needs from the outset and collaborate with them in strategy development and implementation. Here we provide a pragmatic operational model for achieving the safeguarding of ecosystem services. The model comprises three phases: assessment, planning, and management. Outcomes of social, biophysical, and valuation assessments are used to identify opportunities and constraints for implementation. The latter then are transformed into user-friendly products to identify, with stakeholders, strategic objectives for implementation (the planning phase). The management phase undertakes and coordinates actions that achieve the protection of ecosystem services and ensure the flow of these services to beneficiaries. This outcome is achieved via mainstreaming, or incorporating the safeguarding of ecosystem services into the policies and practices of sectors that deal with land- and water-use planning. Management needs to be adaptive and should be institutionalized in a suite of learning organizations that are representative of the sectors that are concerned with decision-making and planning. By following the phases of our operational model, projects for safeguarding ecosystem services are likely to empower stakeholders to implement effective on-the-ground management that will achieve resilience of the corresponding social-ecological systems. \textcopyright{} 2008 by The National Academy of Sciences of the USA.}, - pmid = {18621695}, - keywords = {Adaptive management,Land-use planning,Social-ecological systems,Stakeholder engagement}, - file = {/Users/fabio/Zotero/storage/UPNIEYZE/full-text.pdf} -} - -@article{Cozmei2012, - title = {Additive {{Manufacturing Flickering}} at the {{Beginning}} of {{Existence}}}, - author = {Cozmei, C{\u a}t{\u a}lina and Caloian, Florentin}, - year = {2012}, - month = jan, - journal = {Procedia Economics and Finance}, - volume = {3}, - number = {march 2009}, - pages = {457--462}, - issn = {22125671}, - doi = {10.1016/S2212-5671(12)00180-3}, - urldate = {2014-06-12}, - keywords = {additive manufacturing,cost,product,technology}, - file = {/Users/fabio/Zotero/storage/GEVLZVYP/Additive Manufacturing Flickering at the Beginning of Existence.pdf} -} - -@article{Craighill1996, - title = {Lifecycle Assessment and Economic Evaluation of Recycling: {{A}} Case Study}, - author = {Craighill, Amelia L. and Powell, Jane C.}, - year = {1996}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {17}, - number = {2}, - pages = {75--96}, - issn = {09213449}, - doi = {10.1016/0921-3449(96)01105-6}, - urldate = {2014-06-25}, - file = {/Users/fabio/Zotero/storage/ZYQZD49W/Lifecycle assessment and economic evaluation of recycling A case study.pdf} -} - -@article{Cramer2018, - title = {Key {{Drivers}} for {{High-Grade Recycling}} under {{Constrained Conditions}}}, - author = {Cramer, Jacqueline}, - year = {2018}, - month = apr, - journal = {Recycling}, - volume = {3}, - number = {2}, - pages = {16}, - issn = {2313-4321}, - doi = {10.3390/recycling3020016}, - abstract = {Various authors have analyzed the fundamental barriers that hamper the transition towards a circular economy, e.g., economic and business, regulatory and legal, and social. This analysis questions how, under these constrained conditions, high-grade recycling can still be implemented successfully in the Netherlands. The study compares five Dutch material flows: paper and cardboard, plastics, non-wearable textiles, building and demolition waste and mattresses. It is concluded that the following four key conditions should be in place, but need a tailor-made approach for each material flow: (1) adequate collection system/logistics; (2) guaranteed volumes of material supply; (3) clear market demand for and (4) quality guarantee of recycled materials. Moreover, the following five key drivers help circumvent the fundamental barriers and realize the four key conditions: (1) mobilizing power by change agents; (2) cooperation within the material chain; (3) well-attuned financial arrangement; (4) circular procurement; and (5) technological innovation (including redesign). These drivers follow a certain sequence in implementation and circumvent the fundamental barriers each in their own way. This empirical analysis complements the mostly conceptual or theoretical literature on the transition towards high-grade recycling and the circular economy in general. Based on this analysis a conceptual model is developed, in which the key conditions, the key drivers and fundamental barriers are linked. Whether the results also hold true for other countries than the Netherlands needs additional research.}, - keywords = {Dutch examples,Fundamental barriers,High-grade recycling,Key conditions,Key drivers,Material flows}, - file = {/Users/fabio/Zotero/storage/AHNFVS25/Rercycling drivers use .pdf} -} - -@article{cramerBendamustineFollowedObinutuzumab2020, - title = {Bendamustine {{Followed By Obinutuzumab}} and {{Idelalisib}} in {{Patients}} with {{Chronic Lymphocytic Leukemia}} ({{CLL}}): {{CLL2-BCG Trial}} of the {{German CLL Study Group}} ({{GCLLSG}})}, - author = {Cramer, Paula and Von Tresckow, Julia and Fink, Anna-Maria and Braun, Gracia and Robrecht, Sandra and Zhang, Can and Tausch, Eugen and M{\"u}ller, Lothar and Knauf, Wolfgang and {Al-Sawaf}, Othman and Pelzer, Benedikt and Langerbeins, Petra and Fischer, Kirsten and Kreuzer, Karl-Anton and Ritgen, Matthias and Kneba, Michael and Wendtner, Clemens-Martin and Stilgenbauer, Stephan and Eichhorst, Barbara and Hallek, Michael}, - year = {2020}, - month = nov, - journal = {Blood}, - volume = {136}, - number = {Supplement 1}, - pages = {21--23}, - publisher = {{American Society of Hematology}}, - issn = {0006-4971}, - doi = {10.1182/BLOOD-2020-134827}, - urldate = {2022-03-13}, - abstract = {Introduction:The CLL2-BCG trial is a prospective, open-label, multicenter phase-II study based on the "sequential triple-T" (tailored, targeted, total eradication of CLL) concept proposed earlier [Hallek M., Blood 2013; 122(23): 3723-34]. This concept consists of sequentially applied combinations of targeted agents and aims for achieving undetectable minimal residual disease (MRD). It uses a sequential application of bendamustine (Ben) for debulking, followed by obinutuzumab (Obi) plus idelalisib (Ide) as induction and maintenance therapy for an all-comer population of physically fit and unfit, treatment-na\"ive (t-n) and relapsed/refractory (r/r) CLL patients (pts) irrespective of high-risk genetic markers.Methods:Pts with an absolute lymphocyte count {$\geq$} 25.000/\textmu l and/or lymph nodes {$\geq$} 5 cm were to receive 2 cycles of Ben as debulking (70 mg/m{$^2$} d1\&2 q28 d), unless contraindicated. In the induction phase Obi 1000 mg was administered on d 1, 8 and 15 of cycle 1 and d1 of cycles 2-6; Ide was added in cycle 2 (150 mg twice daily). In the maintenance phase, daily dosing of Ide was continued and Obi was administered every 3 months until achieving a MRD-negative complete response or for up to 24 months. The primary endpoint was the overall response rate (ORR) at the end of induction therapy, secondary endpoints included MRD assessment, safety and survival.Due to an increased incidence of opportunistic infections in other Ide trials, amendment 2 in March 2016 limited the recruitment to r/r CLL pts with high-risk features such as presence of a deletion 17p/TP53 mutation and/or ineligibility for ibrutinib treatment (refractoriness, intolerance or contraindications). Slow enrolment led to recruitment stop in September 2019.Results:Between May 2015 and September 2019, 48 pts were enrolled. Sixteen pts were t-n and 32 had r/r CLL with a median of 2 prior lines (range: 1-10); most common were BR and FCR, 6 pts each had received ibrutinib and venetoclax containing therapies. Median age was 66 (range 41-83) years, median CIRS score was 2 (0-13). Twenty-three pts (48\%) were defined unfit by a CIRS score \>6 (7 pts) and/or an impaired renal function with a Creatinine Clearance \<70ml/Min (19 pts); 39 pts were male (81\%). Nineteen pts (40\%) had a del(17p) and/or TP53 mutation; 33 (70\%) an unmutated IGHV status and 15 pts (42\%) a complex karyotype, 36 pts (80\%) had a high or very high CLL-IPI.Thirty-eight patients (79\%, 16 t-n and 22r/r) received Ben debulking. However, 8 pts never started the induction phase due to protocol amendment 2. Forty pts (10 t-n, 30 r/r) received induction treatment (FAS [full analysis set]), 33 completed the full 6 cycles (PP [per protocol] collective). Twenty-seven (7 t-n, 20 r/r) continued in a maintenance phase.At the end of induction, 32 of 40 pts (FAS) and 28 of 33 pts with 6 induction cycles (PP) responded (ORR 80\% and 85\%, respectively); undetectable MRD levels (\<10-4) by 4-color flow were achieved in 9 pts (23\% and 27\%, respectively) [Table 1]. Median progression-free survival was 44 months in t-n and 33 months in r/r CLL pts. Median overall survival was not reached for the t-n and 46 months in r/r pts; nine pts died, seven due to infections (two sepsis, including one in the context of severe enterocolitis, one pneumocystis jirovecii pneumonia and one influenza pneumonia, the other three after disease progression/start of subsequent treatment were considered unrelated to stud treatment), one cardiac arrest and one due to Richter\textasciiacute s transformation.As of June 8th 2020, 603 adverse events (AEs) were reported in the entire cohort; 313 (52\%) were related to study drug and 127 (21\%) were serious adverse events. 286 (47\%) occurred in the induction treatment (see table 1). Of these, 69 (24\%) were CTC grade 3 and 18 (6\%) CTC grade 4, 4 had a fatal outcome. Most common AEs in the induction were infusion-related reactions, neutropenia, thrombocytopenia, anemia, nasopharyngitis, headache, and fatigue [Table 2].Summary/Conclusion:Sequential treatment with Ben debulking, followed by Obi and Ide induction and maintenance achieved responses and even undetectable MRD levels in CLL patients with high-risk disease and extensive prior therapy. However, the study also confirmed the known toxicities of Ide. In light of the current, alternative therapeutic options, the BCG regimen reported here should be used with caution, but represents an alternative treatment option if ibrutinib and venetoclax have failed.} -} - -@article{cramerEffectiveGovernanceCircular2022, - title = {Effective Governance of Circular Economies: {{An}} International Comparison}, - author = {Cramer, Jacqueline}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {343}, - pages = {130874}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130874}, - urldate = {2022-03-13}, - abstract = {This paper focuses on a comparative study of the governance of Circular Economy (CE) in sixteen different countries. The analysis rests on a theoretical framework of insights gained in transition management literature and public administration, particularly network governance. It is assumed that two forms of governance are needed to cope with the complex circular economy transition process: public and network governance. The hypothesis was that in order to implement CE effectively, strong leadership of government, active involvement of stakeholders and receptivity to network governance are crucial. Based on the analysis described in this paper, two models have been designed that refine the original hypothesis: a model on the effectiveness of CE governance and a model that presents four main avenues for developing CE in different socio-cultural and political contexts. It is recommended to continue exploring this area of research, which is underexamined in the literature.}, - file = {/Users/fabio/Zotero/storage/W68T2RUE/full-text.pdf} -} - -@article{cramerFunctionTransitionBrokers2020, - title = {The Function of Transition Brokers in the Regional Governance of Implementing Circular Economy - {{A}} Comparative Case Study of Six Dutch Regions}, - author = {Cramer, Jacqueline M.}, - year = {2020}, - month = jun, - journal = {Sustainability (Switzerland)}, - volume = {12}, - number = {12}, - publisher = {{MDPI}}, - issn = {20711050}, - doi = {10.3390/SU12125015}, - urldate = {2022-03-13}, - abstract = {This paper addresses the question of which function systemic intermediaries (here called 'transition brokers') can fulfil in the regional governance of implementing a circular economy (CE). Empirical research on this issue is scarce. The conclusion, based on a comparative case study of six Dutch regions, is that transition brokers fulfil the function of system orchestration. They can enhance processes of change, build alliances, help create the necessary preconditions, and develop impactful circular initiatives from a neutral standpoint. In a multi-stakeholder setting, transition brokers fulfil a variety of roles, depending on time period, content, and context. Executing these roles requires a number of specific competencies, varying from being entrepreneurially minded to daring to leave one's comfort zone and being able to get the idea of CE accepted in a variety of businesses and organisations. From interviews held with key transition brokers in the six regions, it transpired that there is a clear division of labour between transition brokers vis-a-vis other key actors, among which the local government is included. These findings allow the design of a new model of regional governance in implementing CE from a system level perspective. It is recommended to perform similar case studies in other countries to generalise the results presented here.}, - keywords = {Circular economy,Competencies,Dutch regions,Regional governance,Systemic intermediary,Technological innovation system,Transition broker,Transition management} -} - -@article{cramerImplementingCircularEconomy2020, - title = {Implementing the Circular Economy in the {{Amsterdam Metropolitan Area}}: {{The}} Interplay between Market Actors Mediated by Transition Brokers}, - author = {Cramer, Jacqueline M.}, - year = {2020}, - month = sep, - journal = {Business Strategy and the Environment}, - volume = {29}, - number = {6}, - pages = {2857--2870}, - publisher = {{John Wiley and Sons Ltd}}, - issn = {10990836}, - doi = {10.1002/BSE.2548}, - urldate = {2022-03-13}, - abstract = {This paper analyses the interplay between regime and niche actors in implementing the circular economy through mediation by transition brokers. The study is based on `action research' carried out in the Amsterdam Metropolitan Area. Innovation science is adopted as theoretical approach. First, the analysis shows that more ambitious initiatives could be taken than by individual market actors. Whether these circular initiatives represent just incremental change\textemdash as other studies suggest\textemdash cannot be concluded. Rather, it is plausible to conceptualise the transition process as a continuous transformational change. Second, in creating circular initiatives, the interplay between regime and niche actors was evident but varied. Actors could team up more easily where their interests aligned. This conclusion corresponds with recent innovation literature, which emphasises the importance of linkages between processes at niche, regime and landscape levels. Before generalising the results, similar studies in other regional contexts would be valuable. Short informative: In moving to a circular economy, the willingness of market actors to innovate is crucial. Real-life experiments on the implementation of circular initiatives built by market actors at local level through the mediation of independent intermediaries (here called `transition brokers') are scarce. This study aims to bridge this knowledge gap by focussing on the interplay between niche and regime actors. Action research on implementing the circular economy programme in the Amsterdam Metropolitan Area (2015\textendash 2020) represents an example. Innovation science is adopted as leading theoretical approach. The case shows that more advanced ambitions could be achieved than through individual market actors by themselves. Whether the circular initiatives built represent just incremental change\textemdash as suggested in the few other studies\textemdash is considered too simplistic. It is concluded to conceptualise the CE transition rather as a continuous, transformational change which takes time. The interplay between niche and regime actors was evident in the case but varied. Niche actors could team up more easily with regime actors where their interests coincided. Niche CE innovations did not necessarily develop in protected environments, as suggested by early MLP studies. They could diffuse more widely if they link up with ongoing processes at regime and landscape level. This conclusion corresponds with the more recent innovation literature.}, - keywords = {action research,Amsterdam Metropolitan Area,circular economy,niche and regime,transition brokers,transition management} -} - -@article{cramerPracticebasedModelImplementing2020, - title = {Practice-Based Model for Implementing Circular Economy: {{The}} Case of the {{Amsterdam Metropolitan Area}}}, - author = {Cramer, Jacqueline M.}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {255}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120255}, - urldate = {2022-03-13}, - abstract = {This paper questions how the implementation of the circular economy actually takes place and evolves over time, using the geographical example of the Amsterdam Metropolitan Area. This particular practice-oriented, regional focus is underexposed in the literature. Relying upon transition management literature, the analysis shows through five years' action-research that a pipeline of tailor-made circular initiatives, all at varying speeds, was created and when successful, scaled up. This is visualised in a `practice-based model for implementing circular economy', which specifies the four-phase model by Rotmans et al. (2001). By developing a scheme which represents the activities needed in each phase of the implementation process, Loorbach's transition management cycle (2010) could be refined. Contrary to what Loorbach suggests, these activities largely follow not only a sequential order, but are also cyclic. Studies on similar initiatives in other regional contexts will allow for generalisation of the results gained in the study presented here.}, - keywords = {Action-research,Activity-based implementation scheme,Circular economy,Practice-based model,Regional approach,Transition management}, - file = {/Users/fabio/Zotero/storage/PFBP6FSN/full-text.pdf} -} - -@article{cramerRawMaterialsTransition2017, - title = {The Raw Materials Transition in the {{Amsterdam}} Metropolitan Area: {{Added}} Value for the Economy, Well-Being, and the Environment}, - author = {Cramer, Jacqueline}, - year = {2017}, - month = may, - journal = {Environment}, - volume = {59}, - number = {3}, - pages = {14--21}, - publisher = {{Routledge}}, - issn = {19399154}, - doi = {10.1080/00139157.2017.1301167}, - urldate = {2022-03-13} -} - -@book{Crawford1999, - title = {Solid {{Freeform Fabrication}}: {{A New Direction}} in {{Manufacturing}}}, - author = {Beaman, Joseph J. and Barlow, Joel W. and Bourell, David L. and Crawford, Richard H. and Marcus, Harris L. and McAlea, Kevin P.}, - year = {1997}, - journal = {IEEE Spectrum}, - volume = {36}, - publisher = {{Springer US}}, - address = {{Boston, MA}}, - issn = {00189235}, - doi = {10.1007/978-1-4615-6327-3}, - urldate = {2015-03-17}, - isbn = {978-0-7923-9834-9}, - file = {/Users/fabio/Zotero/storage/54I4WPHT/Beaman et al. - 1997 - Solid Freeform Fabrication A New Direction in Manufacturing.pdf} -} - -@article{cricelliPreventingOpenInnovation2023, - title = {Preventing Open Innovation Failures: {{A}} Managerial Framework}, - shorttitle = {Preventing Open Innovation Failures}, - author = {Cricelli, Livio and Mauriello, Roberto and Strazzullo, Serena}, - year = {2023}, - month = sep, - journal = {Technovation}, - volume = {127}, - pages = {102833}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2023.102833}, - urldate = {2023-08-31}, - abstract = {Open Innovation (OI) is an increasingly popular approach that companies adopt to remain competitive. However, the challenges and complexities entailed by the OI should not be underestimated. These could lead to OI failures and strong negative repercussions for the company. Despite this, literature on the causes of failure of OI is still in its infancy, and results are scattered and fragmented. In this study we perform a systematic bibliometric review of the literature on the causes of failure of OI, to analyse its evolution and to provide a framework to help managers understand and prevent OI failures. We identify ten categories of causes of OI failure to be included in a seven-components framework. This adopts the perspective of the firm and investigates both internal and external causes of failure. Internal components include strategy, business organization, knowledge and Intellectual Property (IP) management, management, and resources. External components discuss the causes of failure related to inter-firm collaboration and the influence of environmental factors. Finally, by leveraging the results of the review activity, we provide some interesting suggestions for future research.}, - keywords = {Bibliometric analysis,Managerial framework,Open innovation,Open innovation failure}, - file = {/Users/fabio/Zotero/storage/UUUDM4GJ/Cricelli et al_2023_Preventing open innovation failures.pdf;/Users/fabio/Zotero/storage/67YHYXGF/S016649722300144X.html} -} - -@article{Croccolo2013, - title = {Experimental Characterization and Analytical Modelling of the Mechanical Behaviour of Fused Deposition Processed Parts Made of {{ABS-M30}}}, - author = {Croccolo, Dario and De Agostinis, Massimiliano and Olmi, Giorgio}, - year = {2013}, - month = nov, - journal = {Computational Materials Science}, - volume = {79}, - pages = {506--518}, - publisher = {{Elsevier B.V.}}, - issn = {09270256}, - doi = {10.1016/j.commatsci.2013.06.041}, - urldate = {2014-07-15}, - keywords = {fdm,fused deposition modelling}, - file = {/Users/fabio/Zotero/storage/UG9XMFVX/Croccolo, De Agostinis, Olmi - 2013 - Experimental characterization and analytical modelling of the mechanical behaviour of fused deposi.pdf} -} - -@article{Croci2021, - title = {Valuing Ecosystem Services at the Urban Level: {{A}} Critical Review}, - author = {Croci, Edoardo and Lucchitta, Benedetta and Penati, Tommaso}, - year = {2021}, - month = jan, - journal = {Sustainability (Switzerland)}, - volume = {13}, - number = {3}, - pages = {1--16}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {20711050}, - doi = {10.3390/su13031129}, - urldate = {2021-12-08}, - abstract = {This paper critically analyses the methodologies that can be adopted to value ecosystem services (ESs) at the urban level through a literature review. While literature on ES valuation has grown in recent years, its application to urban contexts is still limited. Twenty-five papers, which include 29 different case studies, carry out an economic valuation and have undergone an in-depth analysis. The papers have been selected out of 80 papers detected through keywords. Six different valuation methodologies have been employed in the case studies. The most common ESs valued at the urban level are air quality regulation, local climate regulation, carbon sequestration and storage, and aesthetic appreciation and inspiration for culture, art, and design. The methodologies recur with different frequencies in the valuation of ESs at the urban level. Choice modeling and contingent valuation methodologies are used to value a variety of ESs, including regulating, cultural, and supporting services. Other methodologies are used to value only specific ESs. The replacement cost and damage cost avoided methodologies are used for the assessment of regulation services only; the travel cost method and contingent valuation are used for cultural services only. The results indicate that the considered valuation methodologies show different levels of appropriateness with respect to specific ES categories. Therefore, there is a need to expand the application of valuation methodologies to capture the value of all ESs provided by natural resources, in order to protect and enhance them.}, - keywords = {Economic valuation,Nature-based solutions,Urban ecosystem services valuation}, - file = {/Users/fabio/Zotero/storage/HWDXUX44/full-text.pdf} -} - -@article{crociUrbanPESModel2022, - title = {An Urban {{PES}} Model for Diffused Green Areas Requalification and Maintenance in {{Milan}}}, - author = {Croci, Edoardo and Lucchitta, Benedetta and Penati, Tommaso}, - year = {2022}, - month = apr, - journal = {Environmental Science \& Policy}, - volume = {130}, - pages = {47--60}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.01.018}, - urldate = {2022-02-09} -} - -@inproceedings{Crockett1996, - title = {The Liquid-to-Solid Transition in Stereodeposition Techniques}, - booktitle = {Solid {{Freeform Fabrication Proceedings}}}, - author = {Crockett, R S and Calvert, P D}, - year = {1997}, - pages = {257--264}, - publisher = {{University of Texas at Austin}}, - file = {/Users/fabio/Zotero/storage/NB9BFWIA/The liquid-to-solid transition in stereodeposition techniques.pdf} -} - -@article{Crowley2020, - title = {Plastic Bag Consumption Habits in the {{Northern Philippines}}}, - author = {Crowley, Julia}, - year = {2020}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {160}, - pages = {104848}, - publisher = {{Elsevier}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104848}, - urldate = {2020-05-08}, - abstract = {Plastic bags are abundant globally and pose a significant amount of environmental and public health concerns. The purpose of this research is to examine individual variables that predict plastic bag consumption in 3 Northern Philippine municipalities that do not have plastic bag bans, and exhibit wide variations in the quality of their solid waste management systems. These include Sarrat, Vintar, and Solsona in the province of Ilocos Norte. An equal number of respondents were surveyed from each municipality. Results suggest that age, municipality, dumping solid waste in public areas compared to dropping it off at designated locations, and composting solid waste compared to dropping it off at designated locations are all predictors of weekly plastic bag consumption. Education variables were not predictors of weekly plastic bag consumption nor were perceptions of plastic bags as bad for the environment. This suggests that additional educational programs and incentives are needed at the local levels to reduce plastic bag consumption.}, - keywords = {Philippines,Plastic bags,Plastic reduction,Solid waste management} -} - -@misc{Crump1988, - title = {Apparatus and Method for Creating Three-Dimensional Objects.}, - author = {Crump, S.S.}, - year = {1988}, - month = jun, - publisher = {{Patent and Trademark Office}}, - address = {{United States}}, - urldate = {2013-12-26}, - abstract = {Apparatus incorporating a movable dispensing head provided with a supply of material which solidifies at a predetermined temperature, and a base member, which are moved relative to each other along "X," "Y," and "Z" axes in a predetermined pattern to create three-dimensional objects by building up material discharged from the dispensing head onto the base member at a controlled rate. The apparatus is preferably computer driven in a process utilizing computer aided design (CAD) and computer-aided (CAM) software to generate drive signals for controlled movement of the dispensing head and base member as material is being dispensed. Three-dimensional objects may be produced by depositing repeated layers of solidifying material until the shape is formed. Any material, such as self-hardening waxes, thermoplastic resins, molten metals, two-part epoxies, foaming plastics, and glass, which adheres to the previous layer with an adequate bond upon solidification, may be utilized. Each layer base is defined by the previous layer, and each layer thickness is defined and closely controlled by the height at which the tip of the dispensing head is positioned above the preceding layer.} -} - -@article{Crump1991, - title = {Fast, {{Precise}}, {{Safe Prototypes}} with {{FDM}}.}, - author = {Crump, S. Scott}, - year = {1991}, - journal = {ASME Annual Winter Conference, Atlanta, December}, - pages = {50}, - isbn = {0791808483}, - file = {/Users/fabio/Zotero/storage/DLGXRBDU/Fast, Precise, Safe Prototypes with FDM.pdf} -} - -@article{Cruz2003, - title = {Evaluation and Identification of Degradative Processes in Post-Consumer Recycled High-Density Polyethylene}, - author = {Cruz, S. A. and Zanin, M.}, - year = {2003}, - journal = {Polymer Degradation and Stability}, - volume = {80}, - number = {1}, - pages = {31--37}, - issn = {01413910}, - doi = {10.1016/S0141-3910(02)00379-8}, - abstract = {We have studied the degradation resulting from reprocessing of post-consumer HDPE in order to verify its re-stabilization needs. Cone-plate rheometry was used to provide information about the molar mass and the molar mass distribution after reprocessing and stabilizing the material. Infrared spectroscopy (FTIR), oxidation induction time (OIT), melt flow index (MFI) and cone-plate rheometry measurements were performed. Also, atomic absorption spectrophotometry tests were carried out to verify which catalytic residue was present in the recycled HDPE so as to correlate it to the degradation processes taking place in the polymer. The results showed that in this case the post-consumer HDPE displayed cross-linking when reprocessed, indicating the need for re-stabilization. They also showed that the use of 0.2\% antioxidant was efficient in blocking these processes, and that the cone-plate rheometry technique was powerful in assessing degradative processes. ?? 2003 Elsevier Science Ltd. All rights reserved.}, - file = {/Users/fabio/Zotero/storage/UWRZD2P6/Cruz, Zanin - 2003 - Evaluation and identification of degradative processes in post-consumer recycled high-density polyethylene.pdf} -} - -@inproceedings{Cruz2015, - title = {Polymer {{Recycling}} and {{Additive Manufacturing}} in an {{Open Source}} Context : {{Optimization}} of Processes and Methods}, - booktitle = {Solid {{Freeform Fabrication}}}, - author = {Cruz, Fabio and Lanza, Silvia and Boudaoud, Hakim and Hoppe, Sandrine and Camargo, Mauricio}, - year = {2015}, - pages = {1591--1600}, - address = {{Austin, Texas}}, - abstract = {Polymer recycling is a way to reduce environmental impacts of accumulation of polymeric waste materials. However, low recycling rates are often observed in conventional centralized recycling plants mainly to the challenge of collection and transportation for high-volume low-weight-polymers in conventional centralized recycling plants. As the democratization of open-source 3D printers is going forward thanks to initiatives such as FabLab environments, there is a growing interest on how to use this technology to improve the efficiency of use of raw materials. Studies have been proposed in order to recycle waste polymer into open-source 3D printer feedstock. The recycling of high-density polyethylene (HDPE) issued from bottles of used milk jugs through use of an open-source filament fabricator system called RecycleBot has been evaluated. In this study, we propose an evaluation of the mechanical recyclability of Polylactic Acid (PLA), material widely used in the open-source 3D printing context, in order to establish the viability of this recycled material to be used in the open-source 3D printers. The degradation of the material's mechanical and rheological properties after a number of cycles of multiple extrusion and printing processes is evaluated. The characterization of recycled raw materials for open-source 3D printing has implications not only to reduce the environmental impact of polymers waste, but also it will allow us to understand the technical requirements and challenges for development of open-source filament recycle machine/process. The coupling of open-source 3D printers and filament extruders can offer the bases of a new distributed polymer recycling paradigm, which reverses the traditional paradigm of centralizing recycling of polymers where is often uneconomic and energy intensive due to transportation embodied energy. Moreover, this characterization also will allow the exploration of new source of materials and new composite materials for open-source 3D printing, in order to improve the quality of products made by this technology.}, - copyright = {All rights reserved}, - keywords = {3D printing,Open source,PLA,Polymer Recycling,RepRap}, - file = {/Users/fabio/Zotero/storage/693ZAZG3/Cruz et al. - 2015 - Polymer Recycling and Additive Manufacturing in an Open Source context Optimization of processes and methods.pdf} -} - -@article{cruzeAllocationLifeCycle2014, - title = {Allocation in Life Cycle Inventory: Partial Set of Solutions to an Ill-Posed Problem}, - author = {Cruze, Nathan B. and Goel, Prem K. and Bakshi, Bhavik R.}, - year = {2014}, - month = aug, - journal = {The International Journal of Life Cycle Assessment 2014 19:11}, - volume = {19}, - number = {11}, - pages = {1854--1865}, - publisher = {{Springer}}, - issn = {1614-7502}, - doi = {10.1007/S11367-014-0785-3}, - urldate = {2021-09-20}, - abstract = {The primary aim of this paper is to indicate that partitioning allocation methods yields only a small subset of solutions to an ill-posed problem that has potentially infinitely many exact solutions. It will be shown that each of the existing partitioning methods arrives at just one particular solution from among infinitely many solutions of an underdetermined system of linear equations. Some life cycle inventories fall into a class of functions called estimable functions in linear model framework, in which case they are invariant to allocation assumptions. This class of functions unites results described by Heijungs and Frischknecht (Int J Life Cycle Assess 3:321\textendash 332, 1998) and Heijungs and Suh (2002, Conjecture 1, p. 91). The inventories for non-estimable functions obtained through allocation are, in fact, derived under a set of additional implicit equality constraints called side conditions, often resulting in inventory results which differ greatly from one allocation to the next. This paper explicates (1) identification of all estimable functions from any given technology matrix and (2) recovery of side conditions imposed on non-estimable functions through partitioning. These methods are illustrated in a simple example, and their relation to least squares techniques for allocation explored by Marvuglia et al. (Int J Life Cycle Assess 15:1020\textendash 1040, 2010) ;(Int J Agr Environ Inf Syst 3:51\textendash 71, 2012) are discussed. Recommendations are made that may lead to more meaningful ways to obtain additional data or include additional information in life cycle inventories in the future.}, - keywords = {Environment,Environmental Chemistry,Environmental Economics,Environmental Engineering/Biotechnology,general}, - file = {/Users/fabio/Zotero/storage/GA363DC6/full-text.pdf} -} - -@article{cruzeRevisitingLeastSquares2014, - title = {Revisiting Least Squares Techniques for the Purposes of Allocation in Life Cycle Inventory}, - author = {Cruze, Nathan B. and Goel, Prem K. and Bakshi, Bhavik R.}, - year = {2014}, - month = aug, - journal = {The International Journal of Life Cycle Assessment 2014 19:10}, - volume = {19}, - number = {10}, - pages = {1733--1744}, - publisher = {{Springer}}, - issn = {1614-7502}, - doi = {10.1007/S11367-014-0771-9}, - urldate = {2021-09-20}, - abstract = {In this communication we reexamine the use of various least squares techniques (namely ordinary least squares (OLS), data least squares (DLS), and total least squares (TLS)) for the purposes of allocation as proposed in an earlier article in this journal (Marvuglia et al. (Int. J. Life Cycle Assess. 15:1020-1040, 2010)). These methods are placed within the context of traditional methods of partitioning allocation. An equivalence between least squares techniques and traditional partitioning is noted and demonstrated on previously published brick production data. A short summary of the relevant least squares techniques is provided followed by a description of the problem of inventory calculation for the case of more products than processes. This is presented in terms of non-unique solutions to underdetermined systems of linear equations with intensity matrix as unknown. We provide another analysis of the Sicilian brick production case study. Upon reexamination of the brick data, a number of disparities in the published inventories for brick can be more fully explained in terms of (1) data quality, (2) additional assumptions made to extract a solution of an underdetermined system of equations, and (3) discrepancy vectors. Like other types of partitioning, inventories produced by least squares techniques correspond to one of the non-unique solutions of an underdetermined system of linear equations. Based on this insight, we advise against the use of least squares techniques as a black-box approach to the allocation problem and conclude that the recommendation of TLS on the basis of its asymptotic properties is not theoretically justified.}, - keywords = {Environment,Environmental Chemistry,Environmental Economics,Environmental Engineering/Biotechnology,general} -} - -@article{CruzSanchez2014, - title = {Towards a Standard Experimental Protocol for Open Source Additive Manufacturing}, - author = {Cruz Sanchez, Fabio Alberto and Boudaoud, Hakim and Muller, Laurent and Camargo, Mauricio}, - year = {2014}, - month = jul, - journal = {Virtual and Physical Prototyping}, - volume = {9}, - number = {3}, - pages = {151--167}, - issn = {1745-2759}, - doi = {10.1080/17452759.2014.919553}, - urldate = {2015-05-04}, - abstract = {The technological development of open source three-dimensional (3D) printers is creating more affordable Additive Manufacturing (AM) machines for society in different applications. For this reason, the machines' capability should be evaluated in order to establish minimum standards of performance. This paper deals with the development, manufacture and testing of a geometrical benchmarking model (GBM) in order to evaluate the geometrical accuracy performance of open source 3D printers. The methodology is demonstrated with a case study based on fused deposition modelling (FDM). The case study positions the evaluated machine according to ANSI-ISO's International Tolerance (IT) Grades. Furthermore, root-mean-square deviation (RMSD) value is employed as an accuracy estimator, while Taguchi tools are employed to determine the control factors with the highest accuracy for the fabrication of the GBM.}, - copyright = {All rights reserved}, - keywords = {3D printing,benchmarking,machine qualification,open source,Reprap}, - file = {/Users/fabio/Zotero/storage/9B5KS6AB/Towards a standard experimental protocol for open source additive manufacturing.pdf} -} - -@article{CruzSanchez2017, - title = {Polymer Recycling in an Open-Source Additive Manufacturing Context: {{Mechanical}} Issues}, - author = {Cruz Sanchez, Fabio A. and Boudaoud, Hakim and Hoppe, Sandrine and Camargo, Mauricio}, - year = {2017}, - month = oct, - journal = {Additive Manufacturing}, - volume = {17}, - pages = {87--105}, - issn = {22148604}, - doi = {10.1016/j.addma.2017.05.013}, - abstract = {\textcopyright{} 2017 Elsevier B.V. Nowadays, the low recycling rate of polymers is still a challenge to humankind due to energy, economic and logistical issues. In the context of additive manufacturing, there is an exponential use of thermoplastic materials in the industrial and public open-source additive manufacturing sector, leading to an increase in global polymer consumption and waste generation. However, the coupling of the open-source 3D printers with polymer processing could potentially offer the basis for a new paradigm of distributed recycling process. It could be a complementary alternative to the traditional paradigm of centralized recycling of polymers, which is often uneconomical and energy intensive due to transportation embodied energy. In order to achieve this goal, a first step is to prove the technical feasibility to recycle thermoplastic material intended for open-source 3D printing feedstock. The contribution of the present study is twofold: first, a general methodology to evaluate the recyclability of thermoplastics used as feedstock in open-source 3D printing machines is proposed. Then, the proposed methodology is applied to the recycling study of polylactic acid (PLA) material addressed to the fused filament fabrication (FFF) technique, which is currently the most widely used. The main results of this application contribute to the understanding of the influence of the material's physico-chemical degradation on its mechanical properties as well as its potential distributed recyclability.}, - copyright = {All rights reserved}, - keywords = {3D printing,additive manufacturing,Mechanical properties,Open source,PLA,Plastic recycling,RepRap}, - file = {/Users/fabio/Zotero/storage/E3AZAAIY/Polymer recycling in an open-source additive manufacturing context Mechanical issues.pdf} -} - -@article{CruzSanchez2020, - title = {Plastic Recycling in Additive Manufacturing: {{A}} Systematic Literature Review and Opportunities for the Circular Economy}, - author = {Cruz Sanchez, Fabio A. and Boudaoud, Hakim and Camargo, Mauricio and Pearce, Joshua M.}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {264}, - pages = {121602}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121602}, - urldate = {2020-05-14}, - abstract = {The rapid technical evolution of additive manufacturing (AM) enables a new path to a circular economy using distributed recycling and production. This concept of Distributed Recycling via Additive Manufacturing (DRAM) is related to the use of recycled materials by means of mechanical recycling process in the 3D printing process chain. This paper aims to examine the current advances on thermoplastic recycling processes via additive manufacturing technologies. After proposing a closed recycling global chain for DRAM, a systematic literature review including 92 papers from 2009 to 2019 was performed using the scopus, web of science and springer databases. This work examines main topics from six stages (recovery, preparation, compounding, feedstock, printing, quality) of the proposed DRAM chain. The results suggested that few works have been done for the recovery and preparation stages, while a great progress has already been done for the other stages in order to validate the technical feasibility, environmental impact, and economic viability. Potential research paths in the pre-treatment of recycled material at local level and printing chain phases were identified in order to connect the development of DRAM with the circular economy ambition at micro, meso and macro level. The development of each stage proposed using the open source approach is a relevant path to scale DRAM to reach the full technical potential as a centerpiece of the circular economy.}, - copyright = {All rights reserved}, - keywords = {3D printing,Additive manufacturing,Circular economy,Distributed recycling,Plastic recycling}, - file = {/Users/fabio/Zotero/storage/NZHAHFDW/Cruz Sanchez et al. - 2020 - Plastic recycling in additive manufacturing A systematic literature review and opportunities for the circul.pdf} -} - -@article{Cucculelli2020, - title = {Innovation over the Industry Life-Cycle. {{Does}} Ownership Matter?}, - author = {Cucculelli, Marco and Peruzzi, Valentina}, - year = {2020}, - month = feb, - journal = {Research Policy}, - volume = {49}, - number = {1}, - pages = {103878}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103878} -} - -@article{cuellarTenGuidelinesDesign2018, - title = {Ten Guidelines for the Design of Non-Assembly Mechanisms: {{The}} Case of {{3D-printed}} Prosthetic Hands}, - author = {Cuellar, Juan Sebastian and Smit, Gerwin and Zadpoor, Amir A. and Breedveld, Paul}, - year = {2018}, - month = sep, - journal = {Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine}, - volume = {232}, - number = {9}, - pages = {962--971}, - publisher = {{SAGE Publications Ltd}}, - issn = {20413033}, - doi = {10.1177/0954411918794734}, - urldate = {2021-01-12}, - abstract = {In developing countries, prosthetic workshops are limited, difficult to reach, or even non-existent. Especially, fabrication of active, multi-articulated, and personalized hand prosthetic devices is often seen as a time-consuming and demanding process. An active prosthetic hand made through the fused deposition modelling technology and fully assembled right after the end of the 3D printing process will increase accessibility of prosthetic devices by reducing or bypassing the current manufacturing and post-processing steps. In this study, an approach for producing active hand prosthesis that could be fabricated fully assembled by fused deposition modelling technology is developed. By presenting a successful case of non-assembly 3D printing, this article defines a list of design considerations that should be followed in order to achieve fully functional non-assembly devices. Ten design considerations for additive manufacturing of non-assembly mechanisms have been proposed and a design case has been successfully addressed resulting in a fully functional prosthetic hand. The hand prosthesis can be 3D printed with an inexpensive fused deposition modelling machine and is capable of performing different types of grasping. The activation force required to start a pinch grasp, the energy required for closing, and the overall mass are significantly lower than body-powered commercial prosthetic hands. The results suggest that this non-assembly design may be a good alternative for amputees in developing countries.}, - pmid = {30114955}, - keywords = {Additive manufacturing,biomechanical testing/analysis,limb prosthetics,mechanical design,non-assembly design}, - file = {/Users/fabio/Zotero/storage/QUUFBMXA/full-text.pdf} -} - -@article{Cui2003, - title = {Mechanical Recycling of Waste Electric and Electronic Equipment: A Review}, - author = {Cui, Jirang and Forssberg, Eric}, - year = {2003}, - month = may, - journal = {Journal of Hazardous Materials}, - volume = {99}, - number = {3}, - pages = {243--263}, - issn = {03043894}, - doi = {10.1016/S0304-3894(03)00061-X}, - urldate = {2014-05-28}, - keywords = {03,0304-3894,2003 elsevier science b,46-920-492064,46-920-97364,all rights reserved,corresponding author,cui,e-mail address,electronic scrap,fax,j,jirang,km,luth,material recovery,recycling,se,see front matter,tel,v,waste treatment}, - file = {/Users/fabio/Zotero/storage/RRFLTA4W/Mechanical recycling of waste electric and electronic equipment a review.pdf} -} - -@article{Cui2020, - title = {Critical Review of: {{Lead}} and Disrupt: {{How}} to Solve the Innovator's Dilemma. {{Charles A}}. {{O}}' {{Reilly III}} and {{Michael L}}. {{Tushman}}, {{Stanford University Press}}, {{Stanford}}, {{California}} (2016).}, - author = {Cui, Yu and Jiao, Hao and Chen, Jin}, - year = {2020}, - month = mar, - journal = {Technological Forecasting and Social Change}, - volume = {152}, - pages = {119881}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119881} -} - -@article{cuiHowCanCities2018, - title = {How Can Cities Support Sustainability: {{A}} Bibliometric Analysis of Urban Metabolism}, - shorttitle = {How Can Cities Support Sustainability}, - author = {Cui, Xuezhu}, - year = {2018}, - month = oct, - journal = {Ecological Indicators}, - volume = {93}, - pages = {704--717}, - issn = {1470160X}, - doi = {10.1016/j.ecolind.2018.05.056}, - urldate = {2022-09-22}, - abstract = {Urban metabolism concerns the evaluation of how much urban ecosystems produce and consume resources. Such an assessment is now a critical perspective in understanding the manner in which city development affects local and regional environment. Research in urban metabolism is a relatively new and ever-evolving area that encompasses a multidisciplinary field and moves toward a combined natural and social science. This paper offers a verifiable and reproducible systematic literature review of sustainable urban metabolism, analyzing and scrutinizing 813 papers for co-occurrence of keywords. This review aims to answer two research questions: (i) what are the prevailing themes in urban metabolism and (ii) how have these themes measured the support of cities toward sustainability? Through clustering analysis based on bibliometric method, four different focuses and their main keywords were outlined. The four clusters are general concept, methodology, policy issue, and specific element clusters, and their core keywords are city, energy, relationship, network, sustainability, China, indicator, economy, country, recycling, disposal, and recovery. Urban metabolism themes have evolved from nutrient flows and individual element treatment concerning industrial ecology in the course of the past century to ecological views of complex urban networks. The taxonomy of themes and the analysis of their evolution lead to further research agenda on the general framework of urban metabolism toward sustainability.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/D7ZPJYC8/Cui - 2018 - How can cities support sustainability A bibliomet.pdf} -} - -@article{cuiInternetThingsIoT2021, - title = {Internet of {{Things}} ({{IoT}}) Adoption Barriers for the Circular Economy Using {{Pythagorean}} Fuzzy {{SWARA-CoCoSo}} Decision-Making Approach in the Manufacturing Sector}, - author = {Cui, Yongfeng and Liu, Wei and Rani, Pratibha and Alrasheedi, Melfi}, - year = {2021}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {171}, - pages = {120951}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120951}, - urldate = {2021-06-20} -} - -@article{Cullen2020, - title = {Circular Entrepreneurship: {{A}} Business Model Perspective}, - author = {Cullen, Ufuk Alpsahin and De Angelis, Roberta}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - pages = {105300}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105300}, - urldate = {2021-02-20}, - abstract = {The circular economy, which takes inspiration from the `waste not' functioning of the ecosystem to propose more resource efficient production and consumption patterns, has attracted the interest of different stakeholders recently. Yet very little is known about the companies that put circular principles at the heart of doing business and their ecological and social sustainability outcomes. Circular entrepreneurship, conceptualised as the processes of exploration and exploitation of opportunities in the circular economy domain, is just emerging in the circular economy literature and the empirical evidence about how it is implemented through innovative business models is still limited. Our research illustrates and describes the entrepreneurial process and orientation from a business model perspective of a circular firm - Wasted Apple - in the British drinks and beverage industry. We find that entrepreneurial value proposition, value creation and delivery and value capture define our case circular business model. Entrepreneurial orientation is also characterised by embeddedness: being entrepreneurial in the circular economy means to create value for the broader system an organisation is part of. Furthermore, the pursuit of ecological and social value is central to the logic of value creation and typifies the entrepreneurial process.}, - keywords = {Business model,Circular economy,Circular entrepreneurship,Entrepreneurial orientation,Entrepreneurial process} -} - -@article{Culmone2019, - title = {Additive Manufacturing of Medical Instruments: {{A}} State-of-the-Art Review}, - author = {Culmone, Costanza and Smit, Gerwin and Breedveld, Paul}, - year = {2019}, - month = may, - journal = {Additive Manufacturing}, - volume = {27}, - pages = {461--473}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.03.015} -} - -@article{Culot2020, - title = {The Future of Manufacturing: A {{Delphi-based}} Scenario Analysis on {{Industry}} 4.0}, - author = {Culot, Giovanna and Nassimbeni, Guido and Orzes, Guido and Sartor, Marco and Nassimbeni, Guido}, - year = {2020}, - month = apr, - journal = {Technological Forecasting and Social Change}, - pages = {120092}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2020.120092}, - urldate = {2020-05-23}, - abstract = {Industry 4.0 is expected to impart profound changes to the configuration of manufacturing companies with regards to what their value proposition will be and how their production network, supplier base and customer interfaces will develop. The literature on the topic is still fragmented; the features of the emerging paradigm appear to be a contested territory among different academic disciplines. This study assumes a value chain perspective to analyze the evolutionary trajectories of manufacturing companies. We developed a Delphi-based scenario analysis involving 76 experts from academia and practice. The results highlight the most common expectations as well as controversial issues in terms of emerging business models, size, barriers to entry, vertical integration, rent distribution, and geographical location of activities. Eight scenarios provide a concise outlook on the range of possible futures. These scenarios are based on four main drivers which stem from the experts' comments: demand characteristics, transparency of data among value chain participants, maturity of additive manufacturing and advanced robotics, and penetration of smart products. Researchers can derive from our study a series of hypotheses and opportunities for future research on Industry 4.0. Managers and policymakers can leverage the scenarios in long-term strategic planning.}, - keywords = {customization,Customization,Delphi study,Industry 4.0,Industry 40,scenario planning,Scenario planning,servitization,Servitization,value chain,Value chain}, - file = {/Users/fabio/Zotero/storage/7ZUFYYIQ/Culot et al. - 2020 - The future of manufacturing A Delphi-based scenario analysis on Industry 4.0(3).pdf} -} - -@article{Cumming2016, - title = {Students' Writing from Sources for Academic Purposes: {{A}} Synthesis of Recent Research}, - author = {Cumming, Alister and Lai, Conttia and Cho, Hyeyoon}, - year = {2016}, - journal = {Journal of English for Academic Purposes}, - volume = {23}, - pages = {47--58}, - publisher = {{Elsevier Ltd}}, - issn = {14751585}, - doi = {10.1016/j.jeap.2016.06.002}, - abstract = {Educators have long recognized that a major challenge for students learning to write for academic purposes is developing the ability to integrate source material effectively and appropriately into written compositions. To identify and evaluate the current state of empirical evidence, we conducted a systematic synthesis of the published research that has investigated writing from sources systematically from a variety of analytic perspectives, in first and second languages, and in diverse contexts internationally including students in universities, colleges, and secondary schools. Five general claims emerged across our analyses of 69 empirical studies published in refereed journals or books in English from 1993 to 2013. Each claim has firm empirical support but each also warrants further research and refinement: (1) students experience difficulties with, but develop certain strategies to deal with, the complex processes of writing from sources; (2) prior knowledge and experience influence students' performance in writing from sources; (3) differences may appear between L1 and L2 students in their understanding and uses of sources in writing; (4) performance in tasks that involve writing from sources varies by task conditions and types of texts written and read; and (5) instruction can help students improve their uses of sources in their writing.}, - keywords = {English for academic purposes,Instruction,Student development,Writing from sources}, - file = {/Users/fabio/Zotero/storage/5EPQNTJI/Students' writing from sources for academic purposes- A synthesis of recent research.pdf} -} - -@article{Cunha2019, - title = {Social Supply Chain Risk Management: {{A}} Taxonomy, a Framework and a Research Agenda}, - author = {Cunha, Luiza and Ceryno, Paula and Leiras, Adriana}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {1101--1110}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.183} -} - -@article{Cunico2019, - title = {Development and Characterisation of {{3D}} Printing Finishing Process Applying Recycled Plastic Waste}, - author = {Cunico, Marlon Wesley Machado and Kai, Dalton Alexandre and Cavalheiro, Patrick Medeiros and {de Carvalho}, Jonas}, - year = {2019}, - month = jan, - journal = {Virtual and Physical Prototyping}, - volume = {14}, - number = {1}, - pages = {37--52}, - issn = {1745-2759}, - doi = {10.1080/17452759.2018.1521248}, - keywords = {Meth4recycling}, - file = {/Users/fabio/Zotero/storage/7GKPR2ZW/Development and characterisation of 3D printing finishing process applying recycled plastic waste.pdf} -} - -@inproceedings{Curley2013a, - title = {Open {{Innovation}} 2.0: {{A New Paradigm}}}, - booktitle = {{{OISPG White Paper}}}, - author = {Curley, Martin and Salmelin, Bror}, - year = {2013}, - pages = {1--12}, - address = {{Dublin}} -} - -@article{Curtzwiler2018, - title = {Certification Markers for Empirical Quantification of Post-Consumer Recycled Content in Extruded Polyethylene Film}, - author = {Curtzwiler, Greg W. and Williams, Eric B. and Hurban, Emily and Greene, Joseph and Vorst, Keith L.}, - year = {2018}, - journal = {Polymer Testing}, - volume = {65}, - number = {November 2017}, - pages = {103--110}, - publisher = {{Elsevier}}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2017.11.015}, - abstract = {High-density polyethylene is an important polymer for a variety of industrial applications. The pressure for landfill diversion strategies have increased with consumer awareness of traditional end-of-life practices. It is critical to understand the influence of post-consumer recycled polymer (PCR) content on properties and consumer safety as converters blend PCR with virgin resin to increase sustainability. The ability to empirically quantify the PCR content is vital for compliance with minimum content laws. This work determined {$\sim$}380\% increase in UVA absorption, increased carbonyl and terminal vinyl functional groups, a 50\% reduction of fluorescence properties, a reduction of the polymer crystal quality, and a {$\sim$}4 \textdegree C increase in the degradation temperature. The extractables content of all PCR blends complied with the Code of Federal Regulations for direct food contact applications. Trends between the measured properties and PCR content identified potential certification markers for empirical quantification of PCR content and single-measurement quality control metrics.}, - keywords = {Certification,Compliance,High-density polyethylene,Recycling,Safety,Sustainable}, - file = {/Users/fabio/Zotero/storage/JTUKCNEH/Certification markers for empirical quantification of post-consumer recycled content in extruded polyethylene film.pdf} -} - -@article{Curtzwiler2019, - title = {Mixed Post-Consumer Recycled Polyolefins as a Property Tuning Material for Virgin Polypropylene}, - author = {Curtzwiler, Greg W. and Schweitzer, Matthew and Li, Yifan and Jiang, Shan and Vorst, Keith L.}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {117978}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117978}, - file = {/Users/fabio/Zotero/storage/9RF2D2TW/Mixed post-consumer recycled polyolefins as a property tuning material for virgin polypropylene.pdf} -} - -@article{Czajkowski2014, - title = {We Want to Sort! {{Assessing}} Households' Preferences for Sorting Waste}, - author = {Czajkowski, Miko{\l}aj and Kadziela, Tadeusz and Hanley, Nick}, - year = {2014}, - journal = {Resource and Energy Economics}, - volume = {36}, - number = {1}, - pages = {290--306}, - issn = {09287655}, - doi = {10.1016/j.reseneeco.2013.05.006}, - abstract = {There are two major ways in which solid waste can be sorted and recycled - at the household level, when households are required to sort waste into a given number of categories, or in specialised sorting facilities. Traditionally, it has been thought that sorting at the household level is an inconvenience, as it uses space and requires time and effort. Our study provides empirical evidence to the contrary, indicating that home sorting is a net source of utility for some people. Through a carefully designed choice experiment we collected stated choices from members of a Polish municipality with respect to the way their waste is sorted and how often it is collected. In the hypothetical scenario employed, respondents were informed that waste will be sorted anyway - if not at the household level then at a specialised sorting facility. Interestingly, analysis shows that a large group of people are willing to sort waste at the household level even if unsorted waste would be collected at no extra cost. For a minority, increased home sorting of waste would, however, impose a loss of utility. Overall, our results indicate that most respondents preferred to sort waste themselves if given the choice. We provide a few possible explanations of this perhaps surprising result, including the desire to promote a green external image, and a concern about the effectiveness of separation activities performed by others. \textcopyright{} 2013 Elsevier B.V.}, - isbn = {09287655}, - pmid = {14880952}, - keywords = {Choice modelling,G-MNL model,Recycling,Solid waste management}, - file = {/Users/fabio/Zotero/storage/AI5PBWST/We want to sort! Assessing households' preferences for sorting waste.pdf} -} - -@article{Czvikovszky1995, - title = {Reactive Recycling of Multiphase Polymer Systems through Electron Beam}, - author = {Czvikovszky, Tibor}, - year = {1995}, - journal = {Nuclear Inst. and Methods in Physics Research, B}, - volume = {105}, - number = {1-4}, - pages = {233--237}, - issn = {0168583X}, - doi = {10.1016/0168-583X(95)00528-5}, - abstract = {Recycling of polymer structural materials leads to two main obstacles: degradation of macromolecular chains and incompatibility of different polymer components. Both obstacles can be avoided by applying a reactive additive which acts as a functional compatibilizer. Electron-beam processing has been successfully applied to produce multiphase polymer composites using recycled polyester fibers, wood fibers, glass fibers and minerals as reinforcements in thermoplastic matrix. ?? 1995.}, - file = {/Users/fabio/Zotero/storage/F4HQWTYD/Czvikovszky - 1995 - Reactive recycling of multiphase polymer systems through electron beam.pdf} -} - -@article{Czvikovszky1997, - title = {Electron Beam Surface Modifications in Reinforcing and Recycling of Polymers}, - author = {Czvikovszky, T. and Hargitai, H.}, - year = {1997}, - journal = {Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms}, - volume = {131}, - pages = {300--304}, - issn = {0168583X}, - doi = {10.1016/S0168-583X(97)00153-5}, - abstract = {Thermoplastic polymers can be fiber-reinforced in the recycling step through a reactive modification of the interface between the polymer matrix and fiber. Recollected automobile bumpers made of polypropylene copolymers have been reinforced during the reprocessing with eight different types of high-strength fibers, with waste cord-yarns of the tire industry. A thin layer reactive interface of acrylic oligomers has been applied and activated through low energy (175 keV) electron beam (EB). The upcycling (upgrading recycling) resulted in a series of extrudable and injection-mouldable, fiber-reinforced thermoplastic of enhanced bending strength, increased modulus of elasticity and acceptable impact strength. EB treatment has been compared with conventional methods.}, - keywords = {reinforcing}, - file = {/Users/fabio/Zotero/storage/D34UZ937/Electron beam surface modifications in reinforcing and recycling of polymers.pdf} -} - -@article{Czvikovszky2003, - title = {Expected and Unexpected Achievements and Trends in Radiation Processing of Polymers}, - author = {Czvikovszky, T.}, - year = {2003}, - month = jun, - journal = {Radiation Physics and Chemistry}, - volume = {67}, - number = {3-4}, - pages = {437--440}, - issn = {0969806X}, - doi = {10.1016/S0969-806X(03)00081-1}, - abstract = {The last four decades produced exponential development in the polymer processing. Radiation processing - initiated also about 40 years ago - yielded a similar pathway of development in the beginning, mostly in the radiation crosslinking of polymers and in the radiation sterilization of polymer products. There are some unexpected results in the developments of the radiation chemistry of polymers utilized well in the polymer processing today. The most dynamical developments of the microelectronics in our days are based on the efficient utilization of radiation-crosslinkable negative photoresist polymers and the radiation degradable positive photoresist polymers. Rapid prototyping and rapid tooling are indispensable methods in the continuously renewing manufacturing technologies of metal and plastic parts for almost all the industrial branches. Polymer composite manufacturing is also profited in many ways from the experiences of radiation technology. Compatibilization through radiation-reactive monomers and oligomers is attacking two great fields of the future polymer processing. Recycling of commingled polymer wastes, and manufacturing new type of alloys of different synthetic as well as natural polymers are requiring well-engineered interface, which can be achieved by radiation processing in a technically feasible and economically viable way. ?? 2003 Elsevier Science Ltd. All rights reserved.}, - keywords = {Compatibilization,Electron lithography,Laser lithography,Prototyping}, - file = {/Users/fabio/Zotero/storage/DLSEKMXI/Czvikovszky - 2003 - Expected and unexpected achievements and trends in radiation processing of polymers.pdf} -} - -@article{Czyzewski2018, - title = {Secondary Use of {{ABS}} Co-Polymer Recyclates for the Manufacture of Structural Elements Using the {{FFF}} Technology}, - author = {Czy{\.z}ewski, Piotr and Bieli{\'n}ski, Marek and Sykutera, Dariusz and Jurek, Marcin and Gronowski, Marcin and Ryl, {\L}ukasz and Hoppe, Hubert}, - year = {2018}, - month = nov, - journal = {Rapid Prototyping Journal}, - volume = {24}, - number = {9}, - pages = {1447--1454}, - issn = {1355-2546}, - doi = {10.1108/RPJ-03-2017-0042}, - file = {/Users/fabio/Zotero/storage/BDCL5RV4/Secondary use of ABS co-polymer recyclates for the manufacture of structural elements using the FFF technology.pdf} -} - -@article{Dabbous2019, - title = {Assessing the Impact of Knowledge and Perceived Economic Benefits on Sustainable Consumption through the Sharing Economy: {{A}} Sociotechnical Approach}, - author = {Dabbous, Amal and Tarhini, Abbas}, - year = {2019}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {149}, - pages = {119775}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119775} -} - -@article{dabic40YearsExcellence2021, - title = {40 Years of Excellence: {{An}} Overview of {{Technovation}} and a Roadmap for Future Research}, - author = {Dabi{\'c}, Marina and Marzi, Giacomo and Vla{\v c}i{\'c}, Bo{\v z}idar and Daim, Tugrul U. and Vanhaverbeke, Wim}, - year = {2021}, - month = aug, - journal = {Technovation}, - volume = {106}, - pages = {102303}, - publisher = {{Elsevier}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2021.102303}, - urldate = {2021-05-17} -} - -@inproceedings{DaCosta2012, - title = {Development of an Instrumentation System Embedded on {{FPGA}} for Real Time Measurement of Mechanical Vibrations in Rotating Machinery}, - booktitle = {2012 Int. {{Symp}}. {{Instrum}}. {{Meas}}. {{Sens}}. {{Netw}}. {{Autom}}.}, - author = {{da Costa}, Cesar and Mathias, Mauro Hugo and Kashiwagi, Masamori}, - year = {2012}, - month = aug, - pages = {60--64}, - publisher = {{IEEE}}, - doi = {10.1109/MSNA.2012.6324516}, - isbn = {978-1-4673-2467-0} -} - -@article{dadamoAssessingRelationWaste2022, - title = {Assessing the Relation between Waste Management Policies and Circular Economy Goals}, - author = {D'Adamo, Idiano and Mazzanti, Massimiliano and Morone, Piergiuseppe and Rosa, Paolo}, - year = {2022}, - month = dec, - journal = {Waste Management}, - volume = {154}, - pages = {27--35}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.09.031}, - urldate = {2022-11-07}, - abstract = {The European Union has recently prioritized waste policies by embedding them in the new Horizon Europe work programme. Here, circular economy (CE) and digitalization are matching together in order to support all the industrial sectors in increasing their sustainability level. One of the main impacts expected from the EU is a better exploitation of wasted resources. However, waste streams are very different in terms of volumes, embedded materials and management policies. Considering only those waste streams with highest volumes, this study focuses on End-of-Life Vehicle (ELV), Municipal Solid Waste (MSW) and Waste from Electrical and Electronic Equipment (WEEE). Starting from some policy recommendations and analyses identified through a literature review and the support of the experts, a survey has been conducted to identify the most critical items for each waste stream. Results of the survey show that, on the one hand, end of waste strategies has the highest importance for WEEE and ELV categories. On the other hand, social change has the highest importance for MSW. Consequently, end of waste strategies and social change should be considered as enablers of reuse and recycling practices in their reference contexts. In order to counteract the significant socio-economic issues already caused by delays in taking clear decisions about climate change mitigation strategies, policymakers should focus on these policy implications urgently if even more imminent environmental catastrophes are to be avoided.}, - langid = {english}, - keywords = {Circular Economy,End-of-Life Vehicles,Municipal Solid Waste,Policy implications,Waste from Electrical and Electronic Equipment}, - file = {/Users/fabio/Zotero/storage/YY3BPC5V/D'Adamo et al. - 2022 - Assessing the relation between waste management po.pdf;/Users/fabio/Zotero/storage/B32AQNES/S0956053X22004767.html} -} - -@article{dadamoEconomicSustainableDevelopment2022, - title = {Economic Sustainable Development Goals: {{Assessments}} and Perspectives in {{Europe}}}, - author = {D'Adamo, Idiano and Gastaldi, Massimo and Morone, Piergiuseppe}, - year = {2022}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {354}, - pages = {131730}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131730}, - urldate = {2022-04-25} -} - -@article{dagilieneLocalGovernmentsPerspective2021, - title = {Local Governments' Perspective on Implementing the Circular Economy: {{A}} Framework for Future Solutions}, - author = {Dagilien{\.e}, Lina and Varani{\=u}t{\.e}, Viktorija and Bruneckien{\.e}, Jurgita}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {127340}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127340}, - urldate = {2021-05-17}, - file = {/Users/fabio/Zotero/storage/XEJCVUPL/full-text.pdf} -} - -@article{dagilieneWiseManagersThink2020, - title = {Wise Managers Think about Circular Economy, Wiser Report and Analyze It. {{Research}} of Environmental Reporting Practices in {{EU}} Manufacturing Companies}, - author = {Dagiliene, Lina and Frendzel, Maciej and Sutiene, Kristina and {Wnuk-Pel}, Tomasz}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {274}, - pages = {121968}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121968}, - urldate = {2020-08-09}, - abstract = {Today, economic activity is predominantly characterized by a linear transformation of natural resources to production, consumption, and (ultimately) to waste. The Circular Economy (CE) seeks to overcome this by promoting reduction, reuse, recycling, and recovery, but its reflection in the environmental reporting of manufacturing companies remains unclear. By applying neo-institutional theory, we seek to explain how institutional pressures affect environmental reporting from CE perspective. Qualitative content analysis and statistical methods (ANOVA and PCA) were employed to provide original empirical evidence from 226 large manufacturing companies from different industries in the European Union. We found that manufacturing companies, as might be not expected, seek to legitimate their own position and actions by reflecting institutional logics that are centered on normative factors and best practices rather than legislative requirements. We believe this is an important observation particularly for the standard settlers and professional bodies as sustainability reporting guidelines and third-parties assurances may act as facilitators of translating circular business practices into companies` reports. The results obtained can also be applied to corporate decision-making processes regarding creating or redesign of environmental performance measurement and the improvement of external reporting. Practitioners can compare the prevailing profiles of CE environmental reporting in the analyzed companies with the disclosure strategies they are applying. By improving reporting on CE, manufacturing companies can gain more legitimacy among others, shareholders, employees and society as a whole.}, - keywords = {Circular economy,Environmental reporting,Manufacturing companies,Neo-institutional theory,Sustainability reporting} -} - -@article{dahlanderHowOpenInnovation2021, - title = {How Open Is Innovation? {{A}} Retrospective and Ideas Forward}, - author = {Dahlander, Linus and Gann, David M. and Wallin, Martin W.}, - year = {2021}, - month = may, - journal = {Research Policy}, - volume = {50}, - number = {4}, - pages = {104218}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104218}, - urldate = {2021-02-28}, - file = {/Users/fabio/Zotero/storage/BQSF6A8N/full-text.pdf} -} - -@article{Dahlbo2018, - title = {Recycling Potential of Post-Consumer Plastic Packaging Waste in {{Finland}}}, - author = {Dahlbo, Helena and Poliakova, Valeria and Myll{\"a}ri, Ville and Sahimaa, Olli and Anderson, Reetta}, - year = {2018}, - month = jan, - journal = {Waste Management}, - volume = {71}, - pages = {52--61}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2017.10.033} -} - -@article{daiApplyingBayesianBelief2021, - title = {Applying {{Bayesian Belief Network}} to {{Explore Key Determinants}} for {{Nature-based Solutions}}' {{Acceptance}} of {{Local Stakeholders}}}, - author = {Dai, Li and Han, Qi and {de Vries}, Bauke and Wang, Yang}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {127480}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127480}, - urldate = {2021-05-17} -} - -@article{Daily2008, - title = {Ecosystem Services: {{From}} Theory to Implementation}, - author = {Daily, Gretchen C. and Matson, Pamela A.}, - year = {2008}, - month = jul, - journal = {Proceedings of the National Academy of Sciences of the United States of America}, - volume = {105}, - number = {28}, - pages = {9455--9456}, - publisher = {{National Academy of Sciences}}, - issn = {00278424}, - doi = {10.1073/pnas.0804960105}, - urldate = {2021-04-23}, - abstract = {Around the world, leaders are increasingly recognizing ecosystems as natural capital assets that supply life-support services of tremendous value. The challenge is to turn this recognition into incentives and institutions that will guide wise investments in natural capital, on a large scale. Advances are required on three key fronts, each featured here: the science of ecosystem production functions and service mapping; the design of appropriate finance, policy, and governance systems; and the art of implementing these in diverse biophysical and social contexts. Scientific understanding of ecosystem production functions is improving rapidly but remains a limiting factor in incorporating natural capital into decisions, via systems of national accounting and other mechanisms. Novel institutional structures are being established for a broad array of services and places, creating a need and opportunity for systematic assessment of their scope and limitations. Finally, it is clear that formal sharing of experience, and defining of priorities for future work, could greatly accelerate the rate of innovation and uptake of new approaches. \textcopyright{} 2008 by The National Academy of Sciences of the USA.}, - pmid = {18621697}, - file = {/Users/fabio/Zotero/storage/U92AKITD/full-text.pdf} -} - -@article{Daily2009, - title = {Ecosystem Services in Decision Making: Time to Deliver}, - author = {Daily, Gretchen C. and Polasky, Stephen and Goldstein, Joshua and Kareiva, Peter M. and Mooney, Harold A. and Pejchar, Liba and Ricketts, Taylor H. and Salzman, James and Shallenberger, Robert}, - year = {2009}, - month = feb, - journal = {Frontiers in Ecology and the Environment}, - volume = {7}, - number = {1}, - pages = {21--28}, - issn = {1540-9295}, - doi = {10.1890/080025}, - urldate = {2021-04-21}, - abstract = {Over the past decade, efforts to value and protect ecosystem services have been promoted by many as the last, best hope for making conservation mainstream - attractive and commonplace worldwide. In theory, if we can help individuals and institutions to recognize the value of nature, then this should greatly increase investments in conservation, while at the same time fostering human well-being. In practice, however, we have not yet developed the scientific basis, nor the policy and finance mechanisms, for incorporating natural capital into resource- and land-use decisions on a large scale. Here, we propose a conceptual framework and sketch out a strategic plan for delivering on the promise of ecosystem services, drawing on emerging examples from Hawai'i. We describe key advances in the science and practice of accounting for natural capital in the decisions of individuals, communities, corporations, and governments. \textcopyright{} The Ecological Society of America.} -} - -@article{dalessandroFeasibleAlternativesGreen2020, - title = {Feasible Alternatives to Green Growth}, - author = {D'Alessandro, Simone and Cieplinski, Andr{\'e} and Distefano, Tiziano and Dittmer, Kristofer}, - year = {2020}, - month = apr, - journal = {Nature Sustainability}, - volume = {3}, - number = {4}, - pages = {329--335}, - publisher = {{Nature Research}}, - issn = {23989629}, - doi = {10.1038/s41893-020-0484-y}, - urldate = {2021-04-29}, - abstract = {Climate change and increasing income inequality have emerged as twin threats to contemporary standards of living, peace and democracy. These two problems are usually tackled separately in the policy agenda. A new breed of radical proposals have been advanced to manage a fair low-carbon transition. In this spirit, we develop a dynamic macrosimulation model to investigate the long-term effects of three scenarios: green growth, policies for social equity, and degrowth. The green growth scenario, based on technological progress and environmental policies, achieves a significant reduction in greenhouse gas emissions at the cost of increasing income inequality and unemployment. The policies for social equity scenario adds direct labour market interventions that result in an environmental performance similar to green growth while improving social conditions at the cost of increasing public deficit. The degrowth scenario further adds a reduction in consumption and exports, and achieves a greater reduction in emissions and inequality with higher public deficit, despite the introduction of a wealth tax. We argue that new radical social policies can combine social prosperity and low-carbon emissions and are economically and politically feasible.} -} - -@article{dalferroRealSoils3Dprinted2015, - title = {From Real Soils to {{3D-printed}} Soils: {{Reproduction}} of Complex Pore Network at the Real Size in a Silty-Loam Soil}, - author = {Dal Ferro, N and Morari, F}, - year = {2015}, - journal = {Soil Science Society of America Journal}, - volume = {79}, - number = {4}, - pages = {1008--1017}, - doi = {10.2136/sssaj2015.03.0097}, - abstract = {Pore complexity and micro-heterogeneity are pivotal in characterizing biogeochemical processes in soils. Recent advances in X-ray computed microtomography (microCT) allow the 3D soil morphology characterization of undisturbed samples, although its geometrical reproduction at very small spatial scales is still challenging. Here, by combining X-ray microCT with 3D multijet printing technology, we aimed to evaluate the reproducibility of 3D-printing soil structures at the original scale with a resolution of 80 mm and compare the hydraulic properties of original soil samples with those obtained from the soil-like prototypes. Results showed that soil-like prototypes were similar to the original samples in terms of total porosity and pore shape. By contrast the pore connectivity was reduced by incomplete wax removal from pore cavities after the 3D printing procedure. Encouraging results were also obtained in terms of hydraulic conductivity since measurements were successfully conducted on five out of six samples, showing positive correlation with experimental data. We are confident that future developments of 3D-printing technologies and of their combination with microCT will help to further the understanding of soil micro-heterogeneity and its effects on soil-water dynamics. \textcopyright{} Soil Science Society of America, 5585 Guilford Rd., Madison WI 53711 USA. All rights reserved.} -} - -@article{DallaPriaBankoff2012, - title = {Biomechanical {{Characteristics}} of the {{Bone}}}, - author = {Dalla Pria Bankoff, Antonia}, - year = {2012}, - journal = {Human Musculoskeletal Biomechanics}, - pages = {61--86}, - issn = {1067-2516}, - doi = {10.1016/S1067-2516(02)80064-3}, - abstract = {This book covers many aspects of human musculoskeletal biomechanics. As the title represents, aspects of forces, motion, kinetics, kinematics, deformation, stress, and strain are examined for a range of topics such as human muscles, skeleton, and vascular biomechanics independently or in the presence of devices. Topics range from image processing to interpret range of motion and/or diseases, to subject specific temporomandibular joint, spinal units, braces to control scoliosis, hand functions, spine anthropometric analyses along with finite element analyses.}, - arxiv = {0803973233}, - isbn = {978-953-307-638-6}, - pmid = {100220790}, - file = {/Users/fabio/Zotero/storage/9AIQ8ALU/Biomechanical Characteristics of the Bone.pdf} -} - -@article{Dalvi-Esfahani2020, - title = {Students' Green Information Technology Behavior: {{Beliefs}} and Personality Traits}, - author = {{Dalvi-Esfahani}, Mohammad and Alaedini, Zohre and Nilashi, Mehrbakhsh and Samad, Sarminah and Asadi, Shahla and Mohammadi, Majid}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {257}, - pages = {120406}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120406} -} - -@article{Daly2016, - title = {Image-Based Modelling of Nutrient Movement in and around the Rhizosphere}, - author = {Daly, Keith R. and Keyes, Samuel D. and Masum, Shakil and Roose, Tiina}, - year = {2016}, - month = feb, - journal = {Journal of Experimental Botany}, - volume = {67}, - number = {4}, - pages = {1059--1070}, - issn = {14602431}, - doi = {10.1093/jxb/erv544}, - abstract = {In this study, we developed a spatially explicit model for nutrient uptake by root hairs based on X-ray computed tomography images of the rhizosphere soil structure. This work extends our previous work to larger domains and hence is valid for longer times. Unlike the model used previously, which considered only a small region of soil about the root, we considered an effectively infinite volume of bulk soil about the rhizosphere. We asked the question: At what distance away from root surfaces do the specific structural features of root-hair and soil aggregate morphology not matter because average properties start dominating the nutrient transport? The resulting model was used to capture bulk and rhizosphere soil properties by considering representative volumes of soil far from the root and adjacent to the root, respectively. By increasing the size of the volumes that we considered, the diffusive impedance of the bulk soil and root uptake were seen to converge. We did this for two different values of water content. We found that the size of region for which the nutrient uptake properties converged to a fixed value was dependent on the water saturation. In the fully saturated case, the region of soil we needed to consider was only of radius 1.1mm for poorly soil-mobile species such as phosphate. However, in the case of a partially saturated medium (relative saturation 0.3), we found that a radius of 1.4mm was necessary. This suggests that, in addition to the geometrical properties of the rhizosphere, there is an additional effect of soil moisture properties, which extends further from the root and may relate to other chemical changes in the rhizosphere. The latter were not explicitly included in our model.}, - pmid = {26739861}, - keywords = {Phosphate,plant-soil interaction,rhizosphere,structural imaging,X-ray CT.} -} - -@article{DAmico2019, - title = {Artificial {{Neural Networks}} to Assess Energy and Environmental Performance of Buildings: {{An Italian}} Case Study}, - author = {D'Amico, A. and Ciulla, G. and Traverso, M. and Lo Brano, V. and Palumbo, E.}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {117993}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117993} -} - -@article{damoahDoItYourselfDIYLaboratories2021, - title = {Do-{{It-Yourself}} ({{DIY}}) Laboratories and Science, Technology, and Innovation ({{STI}}): Trends, Implications and Future Research}, - author = {Damoah, Isaac Sakyi and Botchie, David}, - year = {2021}, - month = aug, - journal = {https://doi.org/10.1080/09537325.2021.1942826}, - pages = {1--14}, - publisher = {{Routledge}}, - doi = {10.1080/09537325.2021.1942826}, - urldate = {2021-08-24}, - abstract = {DIY laboratory movement across the globe has been trendy over the years. Consequently, the past decade has witnessed a steady rise in the literature devoted to various aspects of the DIY movement. ...}, - keywords = {DIY activities,Do-It-Yourself laboratory (DIY),Science technology and innovation (STI),systematic literature review}, - file = {/Users/fabio/Zotero/storage/7FFD4KAS/full-text.pdf} -} - -@inproceedings{Dams2007, - title = {Open Hardware Platform Helps Students Getting Started in Analog and Digital Design}, - booktitle = {2007 {{IEEE}} Int. {{Conf}}. {{Microelectron}}. {{Syst}}. {{Educ}}.}, - author = {Dams, Wim and Roggemans, Marc and Pelgrims, Patrick and Tierens, Tom and Pauwels, Danny}, - year = {2007}, - month = jun, - pages = {133--134}, - publisher = {{IEEE}}, - doi = {10.1109/MSE.2007.70}, - isbn = {0-7695-2849-X}, - file = {/Users/fabio/Zotero/storage/CDURLIF6/Dams et al_2007_Open hardware platform helps students getting started in analog and digital.pdf} -} - -@article{Dana2019, - title = {Success Factors and Challenges of Grassroots Innovations: {{Learning}} from Failure}, - author = {Dana, L{\'e}o Paul and Gur{\u a}u, Calin and Hoy, Frank and Ramadani, Veland and Alexander, Todd}, - year = {2019}, - month = mar, - journal = {Technological Forecasting and Social Change}, - pages = {119600}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.03.009}, - urldate = {2020-05-21}, - abstract = {Grassroots innovation projects have the potential to generate novel, bottom-up solutions that respond to local situations, interests and values \textendash{} solving the social, economic and environmental problems of marginalized communities; however, these projects can raise important challenges during their design, testing, development and implementation. Although extant studies identify some of these problems, the literature and practice lack a comprehensive diagnostic tool that can effectively predict the potential and success of grassroots initiatives. For this reason, important problems are often neglected, and failed projects are not thoroughly investigated and analyzed, which leads to missed opportunities of corrective learning. This study addresses this knowledge gap, proposing a diagnostic tool based on existing theoretical frameworks, which is then validated by investigating a failed grassroots innovation initiative, in order to identify its major shortcomings, and learn to avoid them in future projects. The findings also outline the role and importance of a socially inclusive approach for an effective deployment of grassroots initiatives, clarifying the relationship between grassroots innovation success and local community involvement.}, - keywords = {Challenges,Community involvement,Grassroots innovation,Strategic diagnostic tool,Success factors} -} - -@article{daneseOnePersonTrash2021, - title = {One Person's Trash Is Another Person's Treasure: {{In}} Search of an Efficient Property Regime for Waste in the {{Global South}}}, - author = {Danese, Giuseppe}, - year = {2021}, - month = jun, - journal = {Waste Management}, - volume = {128}, - pages = {251--260}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.04.061}, - urldate = {2021-06-08} -} - -@article{Dantas2021, - title = {How the Combination of {{Circular Economy}} and {{Industry}} 4.0 Can Contribute towards Achieving the {{Sustainable Development Goals}}}, - author = {Dantas, T.E.T. and {De-Souza}, E.D. and Destro, I.R. and Hammes, G and Rodriguez, C.M.T. and Soares, S.R.}, - year = {2021}, - month = apr, - journal = {Sustainable Production and Consumption}, - volume = {26}, - pages = {213--227}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.10.005}, - urldate = {2020-10-31}, - abstract = {The 17 Sustainable Development Goals (SDG) are an interconnected strategy for the promotion of sustainable practices and solutions that addresses the main issues faced by our society. Concomitantly, two emerging topics are currently gaining interest due to their potential to implement systematic shifts and contribute to achieving the SDG-Circular Economy (CE) and Industry 4.0 (I4.0). This research performed a systematic literature review to identify how the CE-I4.0 nexus, the combination of CE practices and I4.0 technologies, could contribute to achieving the SDG. A total of 50 peer-review articles that addressed the simultaneous or individual link between CE and I4.0 to sustainability form the review portfolio. The articles were first screened with regard to the I4.0 technologies and CE practices applied, and further analyzed in order to understand the stronger links to the SDG. Findings show that the CE-I4.0 nexus directly benefits SDG 7, SDG 8, SDG 9, SDG 11, SDG 12, and SDG 13. The specific targets addressed by the combined implementation of CE practices and I4.0 technologies are disclosed and discussed. We argue that the CE-I4.0 nexus is pivotal in the endeavors to reach the SDG, as it connects innovative technologies with novel circular production and business models, which ultimately brings the opportunity to tackle the SDG targets intensified in this study. Further research could quantitatively address the impacts of the CE-I4.0 nexus, investigate secondary effects on the SDG, or develop further case studies under the CE-I4.0 umbrella.}, - keywords = {Circular economy,Industry 40,Sustainability,Sustainable development goals}, - file = {/Users/fabio/Zotero/storage/H6G4PY49/full-text.pdf} -} - -@article{dardonvilleAssessmentEcosystemServices2022, - title = {Assessment of Ecosystem Services and Natural Capital Dynamics in Agroecosystems}, - author = {Dardonville, Manon and Legrand, Baptiste and Clivot, Hugues and Bernardin, Claire and Bockstaller, Christian and Therond, Olivier}, - year = {2022}, - month = apr, - journal = {Ecosystem Services}, - volume = {54}, - pages = {101415}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2022.101415}, - urldate = {2022-03-07}, - abstract = {Increasing the levels of ecosystem services that contribute to agricultural production (ES) is a challenge for the sustainability of agricultural systems. Agricultural advisors lack low-data operational approaches for assessing ES and knowledge to support development of ES-based systems. To fill this gap, we developed an approach that assesses relations between characteristics of agroecosystems and the ES they offer: pollination, pest, weed and disease control, soil structuration, nitrogen and phosphorus supply to crops, water retention and control of erosion. We distinguished four dimensions of ES: potential capacities, real capacities, levels actually used by farmers and dynamics of the natural capital that supports ES provision. We assessed them with a low-data indicator-based method at the agroecosystem level. It provided a score for (i) the quality of the agroecosystem's spatiotemporal configuration, (ii) positive or negative modulations in ES expression caused by agricultural practices, (iii) the farmer's strategy for using ES and (iv) four components of natural capital dynamics (soil quantity, soil organic matter, phosphorus cycling and the biodiversity that supports ES). We demonstrate the interest of the approach by applying it to 34 contrasting agroecosystems in France and subsequently identifying five agriculture models. Analysis of this case study identified several ways to attain high-yield agroecosystems based on anthropogenic inputs, ES or both. We discuss strengths and possible improvements of our approach and highlight key knowledge gaps to examine in future studies.}, - keywords = {Agroecosystem,Biodiversity,Cropping system,Farmer strategy,Indicator,Multicriteria evaluation} -} - -@article{dartnellResponsesCOVID19Pandemic2021, - title = {Do Responses to the {{COVID-19}} Pandemic Anticipate a Long-Lasting Shift towards Peer-to-Peer Production or Degrowth?}, - author = {Dartnell, Lewis R and Kish, Kaitlin}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {2165--2177}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.05.018}, - urldate = {2021-06-10}, - file = {/Users/fabio/Zotero/storage/TBX9DIJN/full-text.pdf} -} - -@article{DaSilva2018, - title = {Public Policy for Solid Waste and the Organization of Waste Pickers: {{Potentials}} and Limitations to Promote Social Inclusion in {{Brazil}}}, - author = {{da Silva}, Christian Luiz and Bolson, Camille}, - year = {2018}, - month = sep, - journal = {Recycling}, - volume = {3}, - number = {3}, - pages = {40}, - publisher = {{MDPI AG}}, - issn = {23134321}, - doi = {10.3390/recycling3030040}, - urldate = {2020-03-12}, - abstract = {The management model for the National Solid Waste Policy to develop sustainable actions, proposes the social inclusion of recyclable waste pickers in the waste management system. Compliance with the law, the form of participation of the waste pickers, and incentive mechanisms are configured as a relationship open to analysis. Therefore, the aim of this work was to investigate the potentials and limitations of a recycling cooperative, in terms of social technologies and inclusion, to encourage local development. The qualitative approach was aided by structured questionnaires, semi-structured interviews, and participant observation. The resulting evidence suggests that the organization of a cooperative, enabled access to information on the legislation of the National Solid Waste Policy. It showed the need to strengthen relationships with education institutions and public authorities. Despite the low levels of education of the members of the cooperative, projects and knowledge could be developed to aid social technologies. No technological innovations were observed, nor the production of alternative artifacts for recyclable materials. This weakens the cooperative in terms of articulation among peers, most notably the integration of the Catamare cooperative in the network of Cataparan\'a, to support the sale of material produced for industry. It may be concluded that joining the cooperative improved the social, economic, and political conditions of the members, but there were also structural limits to the recycling production chain that were not considered in the National Solid Waste Policy; and to a certain extent this weakens the development of sustainable actions. Furthermore, the organization of the cooperative hindered the development of social technologies and the social inclusion of the waste pickers.}, - keywords = {Brazil,National solid waste policy,Recyclable waste pickers,Recycling cooperatives,Waste management}, - file = {/Users/fabio/Zotero/storage/PM2ULLGR/full-text.pdf} -} - -@article{dasilvaFundamentalElementsTechnology2021, - title = {Fundamental Elements in {{Technology Transfer}}: An in-Depth Analysis}, - author = {{da Silva}, Vander Luiz and Kovaleski, Jo{\~a}o Luiz and Pagani, Regina Negri}, - year = {2021}, - month = mar, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--22}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1894328}, - urldate = {2021-03-14}, - abstract = {Technology Transfer (TT) is an essential process that governs complex operations related to the absorption and dissemination of diverse technologies, in their different natures and forms. Its compl...}, - keywords = {strategic management,Technology Transfer,technology transfer model} -} - -@article{dasilvaSustainableEnergyWaste2023, - title = {Sustainable Energy and Waste Management: {{How}} to Transform Plastic Waste into Carbon Nanostructures for Electrochemical Supercapacitors}, - shorttitle = {Sustainable Energy and Waste Management}, - author = {{da Silva}, Elisangela Pacheco and Fragal, Vanessa Hafemann and Fragal, Eliz{\^a}ngela Hafemann and Sequinel, Thiago and Gorup, Luiz Fernando and Silva, Rafael and Muniz, Edvani C.}, - year = {2023}, - month = nov, - journal = {Waste Management}, - volume = {171}, - pages = {71--85}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.08.028}, - urldate = {2023-08-31}, - abstract = {Plastic waste consumption increases exponentially every year, mainly in the last three years due to the COVID-19 pandemic. The rapid growth of plastic products has exceeded the world's capacity to deal with this type of trash. Thus, it has become a substantial environmental concern in modern society. Another dire concern is the improper disposal of used supercapacitors, leading to serious environmental impacts. Consequently, critical action to tackle this issue is to transform trash into high-valued materials, such as carbon nanomaterial supercapacitors. Considering several methodologies of recycling, pyrolysis stands out due to its simplicity and easy handling of mixed plastic waste to produce carbonaceous materials with different dimensions (0, 1, 2, and 3D). Thus, from this technology, it is possible to create new opportunities for using plastic waste and other types of waste to produce cheaper carbon-based materials for supercapacitors. This review aims to provide readers with a sustainability-driven view regarding the reutilization of plastic trash, discusses the environmental consequences of not doing so, and shows plastic waste solutions. Despite the broad scope of the topic, this review focuses on identifying the currently studied strategies to convert plastic waste into carbon-based electrodes, using less expensive and more efficient competitive protocols, besides emphasizing the diverse types (0, 1, 2, and 3D) of nanostructures. This review also proposes promising options for a sustainable cycle of plastic waste and supercapacitor.}, - keywords = {Carbon,Energy storage,Plastic waste,Pyrolysis,Supercapacitors,Sustainability}, - file = {/Users/fabio/Zotero/storage/U9UFHSXJ/S0956053X23005354.html} -} - -@article{Datta2019, - title = {National Systems of Innovation, Innovation Niches, and Diversity in University Systems}, - author = {Datta, Surja and Saad, Mohammed and Sarpong, David}, - year = {2019}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {143}, - number = {October 2018}, - pages = {27--36}, - publisher = {{Elsevier}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.02.005}, - urldate = {2020-05-21}, - file = {/Users/fabio/Zotero/storage/M37MZY5I/National systems of innovation, innovation niches, and diversity in university systems.pdf} -} - -@article{dauvergneGoverningPlasticsPower2023, - title = {Governing Plastics: {{The}} Power and Importance of Activism in the Global {{South}}}, - shorttitle = {Governing Plastics}, - author = {Dauvergne, Peter}, - year = {2023}, - month = sep, - journal = {Environmental Science \& Policy}, - volume = {147}, - pages = {147--153}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2023.06.011}, - urldate = {2023-07-03}, - abstract = {Over the past two decades, civil society advocacy to improve plastics governance has been surging across the global South. This diverse, fragmented, bottom-up advocacy is now a key force, this Perspective article contends, reforming policy and elevating concerns for community justice, social equity, and human rights. A variety of strategies characterize this advocacy. Activists are raising public awareness and diffusing norms of appropriate behaviour. They are organizing cleanups, partnering with local businesses, and modelling social enterprises. And they are shaming transnational corporations, lobbying governments, and participating in multilateral forums. These mutually-reinforcing strategies, the article maintains, are intensifying pressure to transform plastics governance globally, including negotiating an ambitious plastics treaty. Calls are growing louder for governments to impose targets for ending plastic pollution, eliminate harmful plastics, and reduce overall production. Pressure is rising on states to end trade in unrecyclable plastics, phase out incineration, and require manufacturers to redesign plastic products. Demands are mounting for greater producer responsibility for plastic pollution, a stronger precautionary principle when governing plastics, and more investment in waste and recycling infrastructure. States are also facing growing civil society pressure to implement just transitions to waste-free economies that prioritize the rights of communities and marginalized peoples. More research will be necessary in the coming years to fully evaluate the global influence of South-based advocacy to improve plastics governance. Still, the author concludes, this case offers valuable insights into the ability of South-based activism to not only influence, but also take a leading role in strengthening global environmentalism.}, - langid = {english}, - keywords = {Activism,Civil society,Global environmental politics,Global South,Plastics,Pollution}, - file = {/Users/fabio/Zotero/storage/GFVUMZVW/S1462901123001685.html} -} - -@article{David1994, - title = {Solid {{Freeform Fabrication}}: {{A New Direction}} in {{Manufacturing}}: With {{Research}} and {{Applications}} in {{Thermal Laser Processing}}}, - author = {David, L B}, - year = {1994}, - file = {/Users/fabio/Zotero/storage/NW6LNFMU/David - 1994 - Solid Freeform Fabrication A New Direction in Manufacturing with Research and Applications in Thermal Laser Processing.pdf} -} - -@article{davidsonDevelopmentsLifeCycle2021, - title = {Developments in the Life Cycle Assessment of Chemical Recycling of Plastic Waste \textendash{} {{A}} Review}, - author = {Davidson, Matthew G. and Furlong, Rebecca A. and McManus, Marcelle C.}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {293}, - pages = {126163}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126163}, - urldate = {2021-02-14} -} - -@article{Davies2002, - title = {Beyond the {{Intention}}\textendash{{Behaviour Mythology}}}, - author = {Davies, Janette and Foxall, Gordon R. and Pallister, John}, - year = {2002}, - month = mar, - journal = {Marketing Theory}, - volume = {2}, - number = {1}, - pages = {29--113}, - issn = {1470-5931}, - doi = {10.1177/1470593102002001645} -} - -@article{Davies2021, - title = {The {{European Union}} Roadmap for Implementing Nature-Based Solutions: {{A}} Review}, - author = {Davies, Clive and Chen, Wendy Y. and Sanesi, Giovanni and Lafortezza, Raffaele}, - year = {2021}, - month = jul, - journal = {Environmental Science and Policy}, - volume = {121}, - pages = {49--67}, - publisher = {{Elsevier BV}}, - issn = {18736416}, - doi = {10.1016/j.envsci.2021.03.018}, - urldate = {2021-04-29}, - abstract = {The present paper traces a chronological history, or roadmap, of the documentation produced by the European Union (EU) to promote and implement nature-based solutions (NBS) as an innovation action aiming to establish a socially inclusive, economically vibrant and ecologically resilient society. The EU's ambition is to position Europe as the world leader in NBS Research (via scientific research aiming at generating knowledge and theories) and Innovation (NBS implementation via identifying innovative approaches and best practices), as well as in a global market (for sharing, communicating, collaborating and promoting NBS). Considerable efforts have been made by the European Commission (the executive branch of the EU) as featured in a number of documents, funding programmes and Horizon 2020 (Research and Innovation) projects that span the period from 2012 to 2020. While the European Commission's commitment to promoting NBS within its Member States and beyond is still an ongoing process, we aim to review the efforts undertaken, knowledge gained, and practices accomplished. This roadmap intends to provide interested practitioners, policymakers, researchers, as well as civil organisations with an updated understanding of the leading role of the EU in NBS conceptualisation and operationalisation. This can inform future directions of NBS Research and Innovation actions, which in turn address environmental and societal challenges prompted by urbanisation/re-urbanisation, globalisation/de-globalisation, climate change and, more recently, the COVID-19 pandemic.}, - keywords = {Conceptualisation and operationalisation,European Union,Nature-Based Solutions,Sustainable development} -} - -@article{Davis2006, - title = {Demonstrating the Need for the Development of Internal Research Capacity: {{Understanding}} Recycling Participation Using the {{Theory}} of {{Planned Behaviour}} in {{West Oxfordshire}}, {{UK}}}, - author = {Davis, Georgina and Phillips, Paul S. and Read, Adam D. and Iida, Yuki}, - year = {2006}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {46}, - number = {2}, - pages = {115--127}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2005.07.001} -} - -@book{Davis2011, - ids = {Ba2011}, - title = {Stereolithography}, - author = {Davis, Fred J and Mitchell, Geoffrey R}, - editor = {B{\'a}rtolo, Paulo Jorge}, - year = {2011}, - publisher = {{Springer US}}, - address = {{Boston, MA}}, - doi = {10.1007/978-0-387-92904-0}, - urldate = {2015-02-01}, - isbn = {978-0-387-92903-3}, - file = {/Users/fabio/Zotero/storage/JA7UFD3P/Ba - 2011 - Stereolithography.pdf;/Users/fabio/Zotero/storage/S5XG82VG/Davis, Mitchell - 2011 - Stereolithography.pdf} -} - -@article{Davis2015, - title = {Smart {{Manufacturing}}}, - author = {Davis, Jim and Edgar, Thomas and Graybill, Robert and Korambath, Prakashan and Schott, Brian and Swink, Denise and Wang, Jianwu and Wetzel, Jim}, - year = {2015}, - journal = {Annual Review of Chemical and Biomolecular Engineering}, - volume = {6}, - number = {1}, - pages = {141--160}, - issn = {1947-5438}, - doi = {10.1146/annurev-chembioeng-061114-123255}, - abstract = {Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing.}, - isbn = {1947-5438 978-0-8243-5206-6}, - pmid = {25898070}, - keywords = {advanced manufacturing,advanced sensing,control and platforms,digital,manufacturing,smart manufacturing}, - file = {/Users/fabio/Zotero/storage/J94UXR9E/Smart Manufacturing.pdf} -} - -@article{Dawodu2019, - title = {Expert-Initiated Integrated Approach to the Development of Sustainability Indicators for Neighbourhood Sustainability Assessment Tools: {{An African}} Perspective}, - author = {Dawodu, Ayotunde and Cheshmehzangi, Ali and Williams, Arthur}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {240}, - pages = {117759}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117759} -} - -@article{dawoduIllusionParticipationAre2021, - title = {The Illusion of Participation: {{Are}} Participatory Indicators Truly Effective in Neigborhood Sustainability Assessment Tools}, - author = {Dawodu, Ayotunde and Sharifi, Ayyoob and Cheshmehzangi, Ali and Oladejo, Jumoke}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {311}, - pages = {127538}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127538}, - urldate = {2021-06-10} -} - -@article{Dawood2015, - title = {{{3D}} Printing in Dentistry}, - author = {Dawood, A. and Marti, B. Marti and {Sauret-Jackson}, V. and Darwood, A.}, - year = {2015}, - journal = {British Dental Journal}, - volume = {219}, - number = {11}, - pages = {521--529}, - publisher = {{Nature Publishing Group}}, - issn = {17417503}, - doi = {10.1038/sj.bdj.2015.914}, - abstract = {3D printing has been hailed as a disruptive technology which will change manufacturing. Used in aerospace, defence, art and design, 3D printing is becoming a subject of great interest in surgery. The technology has a particular resonance with dentistry, and with advances in 3D imaging and modelling technologies such as cone beam computed tomography and intraoral scanning, and with the relatively long history of the use of CAD CAM technologies in dentistry, it will become of increasing importance. Uses of 3D printing include the production of drill guides for dental implants, the production of physical models for prosthodontics, orthodontics and surgery, the manufacture of dental, craniomaxillofacial and orthopaedic implants, and the fabrication of copings and frameworks for implant and dental restorations. This paper reviews the types of 3D printing technologies available and their various applications in dentistry and in maxillofacial surgery.}, - isbn = {1476-5373 (Electronic)\textbackslash r0007-0610 (Linking)}, - pmid = {26657435}, - file = {/Users/fabio/Zotero/storage/INPK58TZ/3D printing in dentistry.pdf} -} - -@article{Dayal2014, - title = {Conceptual {{Design}} of {{Pressurized Shelters}} on the {{Lunar Surface}}}, - author = {Dayal, Vinay}, - year = {2014}, - month = jan, - journal = {Journal of Aerospace Engineering}, - volume = {27}, - number = {1}, - pages = {33--39}, - issn = {0893-1321}, - doi = {10.1061/(ASCE)AS.1943-5525.0000257}, - abstract = {Abstract Humankind's next step into space will require long-term habitation and shelter on the lunar surface, which will only be possible if pressurized habitats are available. Buildings on Earth are designed to take advantage of the superior compressive properties of the building material. On the other hand, this luxury will not be available on the Moon because the internal pressure in the building will result in the entire structure being under tension. The use of in situ fabricated glass-fiber composite and the recently developing rapid-prototyping type technology will be useful in fabricating pressurized lunar habitats. Hence, the main objective of the designer will be to reduce the tensile stresses and bring them to manageable limits. This work is concerned with the study of design changes that will result in efficient habitats on the Moon. Designs are presented in this paper that would tend to reduce the tensile stresses and increase the compressive stresses, making it possible to build habitats that will be practical and safe. Proper design and appropriate materials would be the key to building the habitats on the lunar surface. Some ideas for the recycling of carrier moduli have also been presented to reduce possible junk on the lunar surface. \textcopyright{} 2014 American Society of Civil Engineers.}, - keywords = {Appropriate materials,Composite materials,Composites,Compressive properties,Conceptual design,Design change,Ecosystems,Glass fiber composites,Lunar,Lunar habitats,Moon,Pressurized habitat,Proper design,Shelter,Shelters,Shelters (from attack),Structural Design,Tensile stress,Tensile Stress}, - file = {/Users/fabio/Zotero/storage/4ZVBPKFU/Conceptual Design of Pressurized Shelters on the Lunar Surface.pdf} -} - -@article{ddibaGoverningCircularEconomy2020, - title = {Governing the Circular Economy: {{Assessing}} the Capacity to Implement Resource-Oriented Sanitation and Waste Management Systems in Low- and Middle-Income Countries}, - author = {Ddiba, Daniel and Andersson, Kim and Koop, Steven H.A. and Ekener, Elisabeth and Finnveden, G{\"o}ran and Dickin, Sarah}, - year = {2020}, - month = jun, - journal = {Earth System Governance}, - volume = {4}, - publisher = {{Elsevier B.V.}}, - issn = {25898116}, - doi = {10.1016/j.esg.2020.100063}, - urldate = {2022-03-13}, - abstract = {Transitioning to a circular economy requires strategic investments in infrastructure, but it also requires policy coherence, coordination and collaboration among stakeholders across sectors and governance levels. In this paper, we aimed to identify the factors that facilitate or impede governance capacity to adopt circularity in the form of resource recovery from urban organic waste streams. We conducted a literature review and semi-structured interviews using the `Governance Capacity Framework' in a case study of Naivasha, Kenya. Our findings emphasize the importance of leadership from the public sector in co-developing visionary strategies for circularity and using their convening power to facilitate cross-sectoral collaboration. Moreover, we identify a need for bridging theoretical circular economy concepts to initiatives in local communities of practice. The insights in this paper are relevant for advancing the understanding of challenges for governance of the circular economy especially in low-and middle-income country contexts.}, - keywords = {Bioeconomy,Biowaste,Governance capacity,Organic waste,Resource recovery,Sustainable urban development}, - file = {/Users/fabio/Zotero/storage/FSMR9D6T/full-text.pdf} -} - -@article{de-la-torreNewPlasticFormations2021, - ids = {de-la-torre2021a}, - title = {New Plastic Formations in the {{Anthropocene}}}, - author = {{De-la-Torre}, Gabriel Enrique and {Dioses-Salinas}, Diana Carolina and {Pizarro-Ortega}, Carlos Ivan and Santill{\'a}n, Luis}, - year = {2021}, - month = feb, - journal = {Science of The Total Environment}, - volume = {754}, - pages = {142216}, - issn = {0048-9697}, - doi = {10.1016/j.scitotenv.2020.142216}, - urldate = {2022-09-01}, - abstract = {Plastic pollution is one of the major challenges in the Anthropocene. Upon reaching the marine environment, plastic debris is subject to anthropogenic and environmental conditions that result in novel items that vary in composition, physical and chemical characteristics. Here, we reviewed and discussed the potential fate and threat to the environment of four recently described plastic formations: Plastiglomerates, pyroplastics, plasticrusts, and anthropoquinas. The threats identified were mostly related to the release of toxic chemicals and plastic ingestion. Transportation of alien invasive species or microbial pathogens and fragmentation of larger plastics into microplastics ({$<$}5~mm), potentially reaching marine trophic webs, are suspected as potential impacts based on the characteristics of these plastic formations. Some plastic forms may persist in the environment and voyage across the ocean, while others are denser and less likely to enter the plastic cycle or interact with biota. In the latter case, plastics are expected to become buried in the sediment and incorporate into the geological record. It is necessary to establish sampling protocols or standards that are specific to each plastic formation and start reporting the occurrence of these new plastic categories as such to avoid underestimating plastic pollution in marine environments. It is suggested that monitoring plans include these categories and identify potential sources. Further research must focus on investigating whether the suspected impacts are a matter of concern. In this sense, we have suggested research questions to address the knowledge gaps and have a better understanding of the impacts and distribution of the new plastic forms.}, - langid = {english}, - keywords = {Anthropogenic,Conglomerate,Peru,Plastic rock,Plasticene,Pollution}, - file = {/Users/fabio/Zotero/storage/BD6RZFLY/De-la-Torre et al. - 2021 - New plastic formations in the Anthropocene.pdf;/Users/fabio/Zotero/storage/DYA7HBL7/De-la-Torre et al. - 2021 - New plastic formations in the Anthropocene.pdf;/Users/fabio/Zotero/storage/YPQXPFK5/S0048969720357454.html} -} - -@article{dealmeidaMethodologyIdentifyingResults2021, - title = {A Methodology for Identifying Results and Impacts in Technological Innovation Projects}, - author = {{de Almeida}, Liliane and {Augusto de Jesus Pacheco}, Diego and ten Caten, Carla Schwengber and Jung, Carlos Fernando}, - year = {2021}, - month = aug, - journal = {Technology in Society}, - volume = {66}, - pages = {101574}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2021.101574}, - urldate = {2021-06-08} -} - -@article{deangelisCircularEconomyParadox2021, - title = {Circular Economy and Paradox Theory: {{A}} Business Model Perspective}, - author = {De Angelis, Roberta}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {285}, - pages = {124823}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2020.124823}, - urldate = {2021-07-20}, - abstract = {Business models have become the subject of increasing attention amid management practitioners and researchers since the early nineties and business model innovation has emerged as a distinctive field of academic enquiry. More recently, business model innovation for the circular economy has caught the attention of business leaders and academics alike as the circular economy promises to deliver economic prosperity within ecological limits. Yet research on circular business models is nascent and the business literature gives limited attention to the challenges deriving from circular economy implementation. Using an integrative research approach and particularly, drawing on both paradox theory and circular economy principles and loops, this article provides a preliminary, conceptual systematisation of the typology of organisational tensions in circular economy implementation. It also discusses the relevance of these tensions from a business model perspective. As a result, this article contributes to circular economy research wherein challenges are mostly analysed at the macro level and in the absence of a specific theoretical anchoring.}, - keywords = {Business model innovation,Circular economy,Corporate sustainability,Paradox} -} - -@article{debroyBuildingDigitalTwins2017, - title = {Building Digital Twins of {{3D}} Printing Machines}, - author = {DebRoy, T. and Zhang, W. and Turner, J. and Babu, S. S.}, - year = {2017}, - month = jul, - journal = {Scripta Materialia}, - volume = {135}, - pages = {119--124}, - publisher = {{Elsevier Ltd}}, - issn = {13596462}, - doi = {10.1016/j.scriptamat.2016.12.005}, - urldate = {2020-07-03}, - abstract = {Geometrical conformity, microstructure and properties of additively manufactured (AM) components are affected by the desired geometry and many process variables within given machines. Building structurally sound parts with good mechanical properties by trial and error is time-consuming and expensive. Today's computationally-efficient, high-fidelity models can simulate the most important factors that affect the AM products' properties, and upon validation can serve as components of digital twins of 3D printing machines. Here we provide a perspective of the current status and research needs for the main building blocks of a first generation digital twin of AM from the viewpoints of researchers from several organizations.}, - keywords = {Additive manufacturing,Heat transfer and material flow,Microstructure and properties,Residual stresses and distortion,Solidification and texture}, - file = {/Users/fabio/Zotero/storage/647HEPE9/full-text.pdf} -} - -@phdthesis{DeBruijn2010, - title = {On the Viability of the Open Source Development Model for the Design of Physical Objects {{Lessons}} Learned from the {{RepRap}} Project}, - author = {{de Bruijn}, Erik}, - year = {2010}, - school = {University of Tilburg}, - file = {/Users/fabio/Zotero/storage/IP6F3Q9Z/de Bruijn - 2010 - On the viability of the open source development model for the design of physical objects Lessons learned from the Rep.pdf} -} - -@article{decarvalhoaraujoLifeCycleAssessment2022, - title = {Life Cycle Assessment as a Guide for Designing Circular Business Models in the Wood Panel Industry: {{A}} Critical Review}, - author = {{de Carvalho Ara{\'u}jo}, Cristiane Karyn and Bigarelli Ferreira, Mariane and Salvador, Rodrigo and {de Carvalho Ara{\'u}jo}, Camilla Kawane Ceciliano and Camargo, Bruno Silva and {de Carvalho Ara{\'u}jo Camargo}, S{\^a}mique Kyene and {de Campos}, Cristiane In{\'a}cio and Piekarski, Cassiano Moro}, - year = {2022}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {355}, - pages = {131729}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131729}, - urldate = {2022-05-23} -} - -@inproceedings{Dechamp2019, - title = {La Cr\'eation de Communs Dans Les Fablabs : Une Force de Disruption \`a D\'evelopper}, - booktitle = {{{AIMS}} ({{Association}} Internationale de Management Strat\'egique)}, - author = {Dechamp, Gaelle and P{\'e}lissier, Maud}, - year = {2019}, - urldate = {2022-04-19}, - file = {/Users/fabio/Zotero/storage/CWR3SREJ/full-text.pdf} -} - -@techreport{DechetsChiffresclesEdition, - title = {D\'echets Chiffres-Cl\'es {{\'Edition}} 2020}, - urldate = {2020-10-19}, - abstract = {Illustration de couverture : Agence Welko R\'ealisation : Agence Welko Brochure r\'ef. 010692 EAN version \'electronique : 9791029712142 ISSN version \'electronique : 2425-3588 EAN version imprim\'ee : 9791029712135 ISSN version imprim\'ee : 2275-5691 Impression : 500 ex-Setig Certification PEFC, Iso 14001, Imprim'vert D\'ep\^ot l\'egal : \textcopyright ADEME \'Editions, septembre 2020 Toute repr\'esentation ou reproduction int\'egrale ou partielle faite sans le consentement de l'auteur ou de ses ayants droit ou ayants cause est illicite selon le Code de la propri\'et\'e intellectuelle (art. L122-4) et constitue une contrefa\c{c}on r\'eprim\'ee par le Code p\'enal. Seules sont autoris\'ees (art. 122-5) les copies ou reproductions strictement r\'eserv\'ees \`a l'usage priv\'e de copiste et non destin\'ees \`a une utilisation collective, ainsi que les analyses et courtes citations justifi\'ees par le caract\`ere critique, p\'edagogique ou d'information de l'oeuvre \`a laquelle elles sont incorpor\'ees, sous r\'eserve, toutefois, du respect des dispositions des articles L122-10 \`a L122-12 du m\^eme Code, relatives \`a la reproduction par reprographie.}, - isbn = {9791029712142}, - keywords = {ADEME,ADEME Suivi d'\'edition : Agn\`es HEYBERGER-PAROISSE,Coordination technique : Christian MATHERY,Direction \'Economie circulaire et D\'echets,Direction ex\'ecutive de la Mobilisation pour la Transition \'ecologique,Service Mobilisation des Professionnels,Service Mobilisation et Valorisation des D\'echets}, - file = {/Users/fabio/Zotero/storage/WA2EEBAQ/full-text.pdf} -} - -@article{DeCiurana2013, - title = {Selecting {{Process Parameters}} in {{RepRap Additive Manufacturing System}} for {{PLA Scaffolds Manufacture}}}, - author = {{de Ciurana}, Joaquim and Seren{\'o}a, L{\'i}dia and Vall{\`e}s, {\`E}lia}, - year = {2013}, - month = jan, - journal = {Procedia CIRP}, - volume = {5}, - pages = {152--157}, - issn = {22128271}, - doi = {10.1016/j.procir.2013.01.031}, - urldate = {2013-03-14}, - abstract = {Additive manufacturing (AM) technologies may offer a viable and simpler alternative to fabricate scaffolds directly from patients' data. Existing commercial AM machines are currently being modified to improve their accuracy and capabilities. However, high costs, material restrictions, and difficulty to study process parameters should be considered. In this context, this work focuses on the study and optimization of a novel open-source and low-cost 3D printer machine, called RepRap, employed to fabricate biocompatible scaffolds. Several process parameters and porosity were studied. Lastly, the RepRap printer was considered a versatile, inexpensive, flexible, and simple machine to efficiently fabricate scaffolds.}, - keywords = {additive manufacturing,pla,reprap,scaffold}, - file = {/Users/fabio/Zotero/storage/EEJBN8JU/de Ciurana, Serenóa, Vallès - 2013 - Selecting Process Parameters in RepRap Additive Manufacturing System for PLA Scaffolds Manufactur.pdf} -} - -@patent{Deckard1989, - title = {Selective Laser Sintering with Assisted Powder Handling}, - author = {Deckard, Carl R and Beaman, Joseph J.}, - year = {1989}, - address = {{United States}}, - urldate = {2016-08-25}, - abstract = {A method and apparatus for selectively sintering a layer of powder to produce a part comprising a plurality of sintered layers. The apparatus includes a computer controlling a laser to direct the laser energy onto the powder to produce a sintered mass. The computer either determines or is programmed with the boundaries of the desired cross-sectional regions of the part. For each cross-section, the aim of the laser beam is scanned over a layer of powder and the beam is switched on to sinter only the powder within the boundaries of the cross-section. Powder is applied and successive layers sintered until a completed part is formed. Preferably, the powder is deposited to the target area of the laser and attains high bulk density during sintering.} -} - -@article{Decker2015, - title = {A Simplified Benchmarking Model for the Assessment of Dimensional Accuracy in {{FDM}} Processes}, - author = {Decker, Nathan and Yee, Albert}, - year = {2015}, - journal = {International Journal of Rapid Manufacturing}, - volume = {5}, - number = {2}, - pages = {145}, - issn = {1757-8817}, - doi = {10.1504/IJRAPIDM.2015.073573}, - file = {/Users/fabio/Zotero/storage/SMZAHZBQ/A simplified benchmarking model for the assessment of dimensional accuracy in FDM processes.pdf} -} - -@article{DeCrescenzio2011, - title = {Design and Manufacturing of Ear Prosthesis by Means of Rapid Prototyping Technology.}, - author = {De Crescenzio, F and Fantini, M and Ciocca, L and Persiani, F and Scotti, R}, - year = {2011}, - journal = {Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine}, - volume = {225}, - number = {3}, - pages = {296--302}, - issn = {0954-4119}, - doi = {10.1243/09544119jeim856}, - abstract = {In this paper, the complete procedure to design and construct reusable moulds for implant-based ear prosthesis and manufacture substructures by means of a computer aided design-computer aided manufacturing (CAD-CAM) procedure and rapid prototyping (RP) technology is presented. The scan of the healthy ear, the virtual superimposition of its mirrored image on to the defective side, and the rapid manufacturing of the substructure and of the mould eliminate several steps of traditional procedures (wax, stone, try-in). Moreover, the precise design and customization of the substructure is presented, with the original and engineered shape for the retention of the silicone. The time and cost saving results of this protocol are presented together with a discussion of the main design features that make the prosthesis a stable and reproducible system to improve rehabilitation of patients with auricular defects or absence.}, - isbn = {0954-4119}, - pmid = {21485330}, - keywords = {cad,cam,facial rehabilitation,prosthetic rehabilitation,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/3TK8XXYF/De Crescenzio et al. - 2011 - Design and manufacturing of ear prosthesis by means of rapid prototyping technology.pdf} -} - -@article{defanoEmpoweringPlasticRecycling2022, - title = {Empowering Plastic Recycling: {{Empirical}} Investigation on the Influence of Social Media on Consumer Behavior}, - author = {De Fano, Domenico and Schena, Rosamartina and Russo, Angeloantonio}, - year = {2022}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {182}, - pages = {106269}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106269}, - urldate = {2022-03-14} -} - -@article{defazioDisassemblyMapNew2021, - title = {The {{Disassembly Map}}: {{A}} New Method to Enhance Design for Product Repairability}, - author = {De Fazio, Francesco and Bakker, Conny and Flipsen, Bas and Balkenende, Ruud}, - year = {2021}, - journal = {Journal of Cleaner Production}, - volume = {320}, - pages = {128552}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128552}, - urldate = {2021-09-15}, - abstract = {Designers and engineers need better tools and methods to create highly repairable products. Design for disassembly and reassembly is an important product related design feature that can enhance repair. In a highly repairable product, the components that fail most often should be easily accessible for repair or replacement. This paper describes the development of a method to visually map the disassembly of a product, showing different routes towards target components. These components can be those with a high potential failure rate (important for repair), embodied environmental impact (important for recycling) and economic value (relevant for component harvesting), depending on the circular strategy under consideration. The `Disassembly Map' method is set up to guide product design and is aligned with the most recent research and standards on product repairability. The ease of disassembly is assessed on Four main design parameters are considered in this method to assess the ease of disassembly of: disassembly sequence/depth, type of tools, fastener reusability/reversibility, and disassembly time. In contrast to most of the related literature found, the Disassembly Map method is not based on the use of an algorithm for the automatic calculation of optimised disassembly sequences. It asks designers and engineers to analyse each disassembly step using standardized visual elements based on the ease of Disassembly Metric (eDiM) and the Maynard Operation Sequence Technique (MOST). Insights gathered from this analysis and the resulting visualisation can be used in an iterative product development process. The method was developed by analysing seven vacuum cleaners. Its effectiveness was then tested by redesigning one of them, enhancing its repairability.}, - keywords = {Design method,Disassembly map,Product design,Repair,Repairability,Vacuum cleaner}, - file = {/Users/fabio/Zotero/storage/XNAK6XVY/full-text.pdf} -} - -@article{defeoProcedureAssessEnvironmental2021, - title = {A Procedure to Assess the Environmental, Social and Economic Benefits Wasted in the Paper and Cardboard Fraction of the Unsorted Residual Waste}, - author = {De Feo, Giovanni and D'Argenio, Ferdinando and Ferrara, Carmen and Grosso, Alberto}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {296}, - pages = {126566}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126566}, - urldate = {2021-03-08} -} - -@article{DeFerran2020, - title = {What Makes People More Willing to Dispose of Their Goods Rather than Throwing Them Away?}, - author = {De Ferran, Florence and Robinot, Eliabeth and Ertz, Myriam}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {156}, - pages = {104682}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104682} -} - -@article{degli-innocentiCompostingPackagingReal2021, - title = {Is Composting of Packaging Real Recycling?}, - author = {{Degli-Innocenti}, Francesco}, - year = {2021}, - month = jul, - journal = {Waste Management}, - volume = {130}, - pages = {61--64}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.05.017}, - urldate = {2021-05-31} -} - -@article{DeGroot2002, - title = {A Typology for the Classification, Description and Valuation of Ecosystem Functions, Goods and Services}, - author = {De Groot, Rudolf S. and Wilson, Matthew A. and Boumans, Roelof M.J.}, - year = {2002}, - month = jun, - journal = {Ecological Economics}, - volume = {41}, - number = {3}, - pages = {393--408}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/S0921-8009(02)00089-7}, - urldate = {2020-05-24}, - abstract = {An increasing amount of information is being collected on the ecological and socio-economic value of goods and services provided by natural and semi-natural ecosystems. However, much of this information appears scattered throughout a disciplinary academic literature, unpublished government agency reports, and across the World Wide Web. In addition, data on ecosystem goods and services often appears at incompatible scales of analysis and is classified differently by different authors. In order to make comparative ecological economic analysis possible, a standardized framework for the comprehensive assessment of ecosystem functions, goods and services is needed. In response to this challenge, this paper presents a conceptual framework and typology for describing, classifying and valuing ecosystem functions, goods and services in a clear and consistent manner. In the following analysis, a classification is given for the fullest possible range of 23 ecosystem functions that provide a much larger number of goods and services. In the second part of the paper, a checklist and matrix is provided, linking these ecosystem functions to the main ecological, socio-cultural and economic valuation methods. \textcopyright{} 2002 Elsevier Science B.V. All rights reserved.}, - keywords = {Classification of ecosystem functions,Ecological and socio-economic valuation,Typology of goods and services}, - file = {/Users/fabio/Zotero/storage/F5NG5NPR/De Groot, Wilson, Boumans - 2002 - A typology for the classification, description and valuation of ecosystem functions, goods and servic.pdf} -} - -@article{DeGroot2012, - title = {Global Estimates of the Value of Ecosystems and Their Services in Monetary Units}, - author = {{de Groot}, Rudolf and Brander, Luke and {van der Ploeg}, Sander and Costanza, Robert and Bernard, Florence and Braat, Leon and Christie, Mike and Crossman, Neville and Ghermandi, Andrea and Hein, Lars and Hussain, Salman and Kumar, Pushpam and McVittie, Alistair and Portela, Rosimeiry and Rodriguez, Luis C. and {ten Brink}, Patrick and {van Beukering}, Pieter}, - year = {2012}, - month = jul, - journal = {Ecosystem Services}, - volume = {1}, - number = {1}, - pages = {50--61}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2012.07.005}, - urldate = {2021-10-21}, - abstract = {This paper gives an overview of the value of ecosystem services of 10 main biomes expressed in monetary units. In total, over 320 publications were screened covering over 300 case study locations. Approximately 1350 value estimates were coded and stored in a searchable Ecosystem Service Value Database (ESVD). A selection of 665 value estimates was used for the analysis. Acknowledging the uncertainties and contextual nature of any valuation, the analysis shows that the total value of ecosystem services is considerable and ranges between 490 int\$/year for the total bundle of ecosystem services that can potentially be provided by an 'average' hectare of open oceans to almost 350,000 int\$/year for the potential services of an 'average' hectare of coral reefs. More importantly, our results show that most of this value is outside the market and best considered as non-tradable public benefits. The continued over-exploitation of ecosystems thus comes at the expense of the livelihood of the poor and future generations. Given that many of the positive externalities of ecosystems are lost or strongly reduced after land use conversion better accounting for the public goods and services provided by ecosystems is crucial to improve decision making and institutions for biodiversity conservation and sustainable ecosystem management. \textcopyright{} 2012 Elsevier B.V.}, - keywords = {Ecosystem services,Meta-analysis,Monetary values}, - file = {/Users/fabio/Zotero/storage/SRENXASY/full-text.pdf} -} - -@article{degrootChallengesIntegratingConcept2010, - title = {Challenges in Integrating the Concept of Ecosystem Services and Values in Landscape Planning, Management and Decision Making}, - author = {{de Groot}, R. S. and Alkemade, R. and Braat, L. and Hein, L. and Willemen, L.}, - year = {2010}, - month = sep, - journal = {Ecological Complexity}, - volume = {7}, - number = {3}, - pages = {260--272}, - publisher = {{Elsevier}}, - issn = {1476945X}, - doi = {10.1016/j.ecocom.2009.10.006}, - urldate = {2021-04-23}, - abstract = {Despite the growing body of literature on ecosystem services, still many challenges remain to structurally integrate ecosystem services in landscape planning, management and design. This paper therefore aims to provide an overview of the challenges involved in applying ecosystem service assessment and valuation to environmental management and discuss some solutions to come to a comprehensive and practical framework.First the issue of defining and classifying ecosystem services is discussed followed by approaches to quantify and value ecosystem services. The main part of the paper is focussed on the question how to analyze trade-offs involved in land cover and land use change, including spatial analysis and dynamic modelling tools. Issues of scale are addressed, as well as the question how to determine the total economic value of different management states.Finally, developments and challenges regarding the inclusion of ecosystem services in integrative landscape planning and decision-making tools are discussed.It is concluded that the ecosystem service approach and ecosystem service valuation efforts have changed the terms of discussion on nature conservation, natural resource management, and other areas of public policy. It is now widely recognized that nature conservation and conservation management strategies do not necessarily pose a trade-off between the " environment" and " development" Investments in conservation, restoration and sustainable ecosystem use are increasingly seen as a " win-win situation" which generates substantial ecological, social and economic benefits. \textcopyright{} 2009 Elsevier B.V.}, - keywords = {Ecosystem services,Landscape planning,Modelling,Valuation} -} - -@article{dehghanianDesigningSustainableRecovery2009, - title = {Designing Sustainable Recovery Network of End-of-Life Products Using Genetic Algorithm}, - author = {Dehghanian, Farzad and Mansour, Saeed}, - year = {2009}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {53}, - number = {10}, - pages = {559--570}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2009.04.007}, - urldate = {2022-09-13}, - abstract = {Sustainable development was articulated by the Brundtland Commission as development that ``meets the needs of the present without compromising the ability of future generations to meet their own needs''. Consumers and legislation have pushed companies to re-design their logistics networks in order to mitigate negative environmental and social impacts. The objective of this paper is to design a sustainable recovery network, in which economical, environmental and social impacts are balanced. Life cycle analysis (LCA) has been applied to investigate the environmental impact of different end-of-life (EOL) options. Analytical hierarchy process (AHP) has been utilized to calculate social impacts. Next in this research, a three-objective mathematical programming model has been developed to maximize economic and social benefits and minimize negative environmental impacts, simultaneously. Scrap tires have been considered for a case study. Multi-objective genetic algorithm (MOGA) has been applied to find the Pareto-optimal solutions. In the recovery network of scrap tires, each solution corresponds to a different configuration of the network, based on technology type and location of installed recycling plants. These Pareto-optimal solutions will give some trade off information about the three mentioned objectives, so decision makers can assess the economical impact of efforts of improving the social and environmental issues.}, - langid = {english}, - keywords = {Analytical hierarchy process (AHP),Genetic algorithm,Life cycle assessment (LCA),Recovery networks,Scrap tires,Sustainable development}, - file = {/Users/fabio/Zotero/storage/94RLJ833/Dehghanian y Mansour - 2009 - Designing sustainable recovery network of end-of-l.pdf;/Users/fabio/Zotero/storage/TM5R2IIN/S0921344909000664.html} -} - -@article{Deichmann2020, - title = {Ideas with Impact: {{How}} Connectivity Shapes Idea Diffusion}, - author = {Deichmann, Dirk and Moser, Christine and Birkholz, Julie M. and Nerghes, Adina and Groenewegen, Peter and Wang, Shenghui}, - year = {2020}, - month = feb, - journal = {Research Policy}, - volume = {49}, - number = {1}, - pages = {103881}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103881} -} - -@article{deichmannGettingBoardNew2021, - title = {Getting on Board with New Ideas: {{An}} Analysis of Idea Commitments on a Crowdsourcing Platform}, - author = {Deichmann, Dirk and Gillier, Thomas and Tonellato, Marco}, - year = {2021}, - month = nov, - journal = {Research Policy}, - volume = {50}, - number = {9}, - pages = {104320}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104320}, - urldate = {2021-08-20}, - abstract = {While it is commonly known that ideas submitted through crowdsourcing platforms need support from others to be realized, our understanding of what idea creators can do to garner this support is still limited. In this study, we argue that the behavior of idea creators on a crowdsourcing platform plays a critical role to attract support. In particular, we suggest that creators who commit their time and energy to the development and realization of others' ideas may activate generalized exchange dynamics that result in an increased number of commitments from other peers to their own ideas\textemdash especially when these ideas are very novel or not very feasible. To test our hypotheses, we studied 1,201 participants and their behavior related to 244 ideas on the internal crowdsourcing platform of the car manufacturer Renault. Controlling for a series of relevant individual and idea characteristics, our findings confirm that creators who commit themselves to others' ideas on the crowdsourcing platform elicit more commitments from others for their own ideas. This relationship becomes stronger for very novel and not very feasible ideas. We discuss the theoretical and managerial implications of these findings that contribute to the general discussion of crowdsourcing and how idea creators can assemble a team of supporters on such platforms.}, - keywords = {Creativity,Crowdsourcing,Idea commitment,Idea development,Innovation,Online communities}, - file = {/Users/fabio/Zotero/storage/RBJGX8UZ/full-text.pdf} -} - -@article{Deif2011, - title = {A System Model for Green Manufacturing}, - author = {Deif, Ahmed M.}, - year = {2011}, - journal = {Journal of Cleaner Production}, - volume = {19}, - number = {14}, - pages = {1553--1559}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2011.05.022}, - abstract = {Manufacturing systems evolution is afunction in multiple external and internal factors. With today's global awareness of environmental risks as well as the pressing needs to compete through efficiency, manufacturing systems are evolving into a new paradigm. This paper presents a system model for the new green manufacturing paradigm. The model captures various planning activities to migrate from a less green into a greener and more eco-efficient manufacturing. The various planning stages are accompanied by the required control metrics as well as various green tools in an open mixed architecture. The system model is demonstrated by an industrial case study. The proposed model is a comprehensive qualitative answer to the question of how to design and/or improve green manufacturing systems as well as a roadmap for future quantitative research to better evaluate this new paradigm. ?? 2011 Elsevier Ltd. All rights reserved.}, - isbn = {18546250}, - keywords = {Control,Green manufacturing,Planning}, - file = {/Users/fabio/Zotero/storage/N8H8BCH9/A system model for green manufacturing.pdf} -} - -@article{dejesusEcoinnovationTransitionCircular2016, - title = {Eco-Innovation in the Transition to a Circular Economy: {{An}} Analytical Literature Review}, - author = {{de Jesus}, Ana and Antunes, Paula and Santos, Rui and Mendon{\c c}a, Sandro}, - year = {2016}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {172}, - pages = {2999--3018}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/J.JCLEPRO.2017.11.111}, - urldate = {2022-03-13}, - abstract = {In the ongoing sustainability debate, the circular economy (CE) has been steadily gaining ground as a new paradigm. At the same time, eco-innovation (EI) has been recognised as a key element in carrying out the transition from a linear to a circular system of production and consumption. However, little information can be found concerning whether and how EI can actually facilitate the change to a CE. While extensive literature on EI, and a growing body of research exploring the CE, already exist, there is, as yet, no comprehensive understanding concerning the connections between these two concepts. Drawing on academic contributions from the fields of EI and CE, this analysis seeks to clarify and synthesise findings at the intersection of these two fields. The aim is threefold: derive literature-based working definitions of CE and EI; review the role of EI at CE's macro, meso, and micro levels; and characterise CE-inducing EI in terms of targets, mechanisms and impacts. Our literature review shows that an EI-driven techno-economic transition to a CE requires specific solutions, i.e. different forms of EI-driven ``clean congruence'' at distinct levels of operation. Generally speaking, movement toward a CE is found to be contingent on ``systemic'' EI, that is, not only intense in technology but also involving dynamic and holistic combinations of service innovations and novel organisational set-ups.}, - keywords = {Circular economy,Clean congruence,Eco-innovation,Sustainability transition,Sustainable development} -} - -@article{dejesusLostTransitionDrivers2018, - title = {Lost in {{Transition}}? {{Drivers}} and {{Barriers}} in the {{Eco-innovation Road}} to the {{Circular Economy}}}, - author = {{de Jesus}, Ana and Mendon{\c c}a, Sandro}, - year = {2018}, - month = mar, - journal = {Ecological Economics}, - volume = {145}, - pages = {75--89}, - publisher = {{Elsevier B.V.}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2017.08.001}, - urldate = {2022-03-13}, - abstract = {Understanding which drivers and barriers exist in the development of a circular economy (CE) is a relevant and timely endeavour. The aim of this paper is to contribute to this debate by analysing evidence regarding the different factors helping and hampering the development of a CE. Specifically, this paper focuses on the eco-innovation (EI) pathway towards a CE, and tries to coordinate available but fragmented findings regarding how ``transformative innovation'' can foster this transition while removing obstacles to sustainability. Drawing upon a new corpus of both academic and non-academic literature, this work offers a framework for analysis, as well as an evidence-based survey of the challenges, for a green structural change of the economy. We argue that the combination of the innovation systems' view with the more recent ``transformation turn'' in innovation studies may provide an appropriate perspective for understanding the transition to a CE. Ultimately, the paper aims to capitalise on these insights to contribute to the design of policy guidelines and organisational strategies.}, - keywords = {Barriers,Circular economy,Drivers,Eco-innovation,Survey} -} - -@article{DeJesusPacheco2019, - title = {Overcoming Barriers towards {{Sustainable Product-Service Systems}} in {{Small}} and {{Medium-sized}} Enterprises}, - author = {{de Jesus Pacheco}, Diego Augusto and {ten Caten}, Carla Schwengber and Jung, Carlos Fernando and Sassanelli, Claudio}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {222}, - pages = {903--921}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/J.JCLEPRO.2019.01.152}, - abstract = {The Sustainable Product-Service Systems are a promising approach based on a Triple Bottom Line perspective of the sustainability. However, its practical adoption is still very limited and addresses significant barriers for the manufacturing firms. Furthermore, this emergent topic has been discussed by literature mainly in large company's context, turning in a very limited and immature stage the current body of knowledge for the Small and Medium-sized Enterprises. Thus, considering the significance of small companies to the global economy and their intrinsic difficulties, the purpose of this study was to identify the main barriers involving the Sustainable Product-Service Systems transition in manufacturing Small and Medium-sized Enterprises as well as the strategies to overcome them. A systematic literature review of the past two decades was organized capturing the state-of-art of the area. Findings reveal that internal barriers associated with intrinsic characteristics of SMEs become still more sensitive during the transition (e.g., limited financial resources, the lack of competences, follower mentality and resistance to change). As well as, barriers related with the novelty of Sustainable Product-Service Systems models require new attitudes to small companies (e.g., changing mindsets from product ownership to use, replacing the value of exchange by value in use involving long-term relations, understanding the Product-Service Systems concept) and particularly highlight the lack of models/methods supporting this transition. The practical contribution of this study is in organise a comprehensive body of knowledge on strategies to overcome barriers towards Sustainable Product-Service offering. Moreover, an innovative decision matrix supporting decision-makers during the SPSS transition was developed from the literature review findings.}, - keywords = {product-service system,small and medium-sized enterprises,sustainable product-service system}, - file = {/Users/fabio/Zotero/storage/KY4UBNWF/Overcoming barriers towards Sustainable Product-Service Systems in Small and Medium-sized enterprises- State of the art and a novel Decision Matrix.pdf} -} - -@article{DeJesusPacheco2019a, - title = {State of the Art on the Role of the {{Theory}} of {{Inventive Problem Solving}} in {{Sustainable Product-Service Systems}}: {{Past}}, {{Present}}, and {{Future}}}, - author = {{de Jesus Pacheco}, Diego Augusto and {ten Caten}, Carla Schwengber and Jung, Carlos Fernando and Navas, Helena Victorovna Guitiss and {Cruz-Machado}, Virg{\'i}lio Ant{\^o}nio and Tonetto, Leandro Miletto}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {489--504}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.11.289}, - urldate = {2020-03-22}, - abstract = {The transition towards Sustainable Product-Service Systems (SPSS) is not an easy journey. The literature indicates several difficulties in obtaining success in the development of SPSS offers. These hardships indicate the need for well-structured methods supporting the systematic generation of sustainable innovations and solving contradictions during the stages of the servitization process. The Theory of Inventive Problem Solving (TRIZ) is worldwide recognized by its potential to systematically solve contradictions and generate innovations. However, the research framework available and its application into SPSS domain{$\cdot$} are still very limited. Thus, to address this gap, this paper aims to explore the contributions and challenges of the adoption of TRIZ in the development of SPSSs. A systematic literature review of the foundations and advances in this topic was conducted. The primary results indicate the main contributions from TRIZ to SPSS development, the types of eco-innovations resulting, the artifacts (e.g. models, methods, proposition or instantiation) that applied TRIZ towards SPSS and the most frequent category of PSS resulting according to TRIZ. Findings suggest that the systematic innovation proposed by TRIZ has great potential to enable the development of systematic SPSS offers. Synergies between TRIZ and the sustainable strategies of Cleaner Production also were mapped. Finally, our study proposes a research agenda and indicate the main challenges to apply the TRIZ in SPSS models. A new concept emerges in servitization field: the Systematic and Sustainable Product-Service Systems (SSPSS).}, - keywords = {Eco-innovation,Literature review,Product-service systems,Servitization,Sustainable product-service systems,Systematic innovation,TRIZ} -} - -@article{dejongHeroesDiffusionMaking2023, - title = {Heroes of Diffusion: {{Making}} User Innovations Widely Available}, - shorttitle = {Heroes of Diffusion}, - author = {{de Jong}, Jeroen P. J. and Rigtering, Coen and Spaans, Lara}, - year = {2023}, - month = oct, - journal = {Research Policy}, - volume = {52}, - number = {8}, - pages = {104840}, - issn = {0048-7333}, - doi = {10.1016/j.respol.2023.104840}, - urldate = {2023-07-03}, - abstract = {User innovations are often valuable to other people, but fail to diffuse because users lack incentives to do a dissemination effort. Past research recognized that users sometimes spur diffusion themselves, and that producers may search for and commercialize user innovations. In this study we identify a third type of actor who fills the void between initial solution and broad dissemination - without being a potential user or commercial diffuser himself. We document a case study at an academic hospital where workers created and institutionalized a system to support and disseminate user innovations developed by nurses. They proactively created a network with makerspace facilities, without being asked or instructed to do so. These workers fulfilled a disseminator role: they continued to develop user innovations to make adoption easy, explored commercial pathways, mobilized peer demand, and created favorable project conditions. Interestingly, the diffusion system was institutionalized by job crafting, securing budgets, embedding diffusion activities in the organization chart, and developing strategic relationships. Disseminators were motivated by self-actualization, enjoyment, reputation advancement, and altruism towards the nursing community; they strived to become `heroes of diffusion'. We conclude that a disseminator role in-between user innovators, and peer adopters and commercial producers, represents an alternative mechanism for user innovations to spread widely, and opens opportunities for new research.}, - langid = {english}, - keywords = {Diffusion failure,Makerspaces,Nurse innovation,User innovation}, - file = {/Users/fabio/Zotero/storage/2GZFUFHX/de Jong et al. - 2023 - Heroes of diffusion Making user innovations widel.pdf;/Users/fabio/Zotero/storage/IPN3RCD5/S0048733323001245.html} -} - -@article{dejongTreadingNewGround2021, - title = {Treading New Ground in Household Sector Innovation Research: {{Scope}}, Emergence, Business Implications, and Diffusion}, - author = {{de Jong}, Jeroen P.J. and {Ben-Menahem}, Shiko M. and Franke, Nikolaus and F{\"u}ller, Johann and {von Krogh}, Georg}, - year = {2021}, - month = may, - journal = {Research Policy}, - pages = {104270}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104270}, - urldate = {2021-05-17}, - file = {/Users/fabio/Zotero/storage/XHC3HXGJ/full-text.pdf} -} - -@article{DeJuana-Espinosa2019, - title = {Open Government Data Portals in the {{European Union}}: {{Considerations}}, Development, and Expectations}, - author = {{de Juana-Espinosa}, Susana and {Luj{\'a}n-Mora}, Sergio}, - year = {2019}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {149}, - pages = {119769}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119769} -} - -@article{dekkerTasteNewReCiPe2020, - title = {A Taste of the New {{ReCiPe}} for Life Cycle Assessment: Consequences of the Updated Impact Assessment Method on Food Product {{LCAs}}}, - shorttitle = {A Taste of the New {{ReCiPe}} for Life Cycle Assessment}, - author = {Dekker, Erik and Zijp, Michiel C. and {van de Kamp}, Mirjam E. and Temme, Elisabeth H. M. and {van Zelm}, Rosalie}, - year = {2020}, - month = dec, - journal = {The International Journal of Life Cycle Assessment}, - volume = {25}, - number = {12}, - pages = {2315--2324}, - issn = {1614-7502}, - doi = {10.1007/s11367-019-01653-3}, - urldate = {2022-09-13}, - abstract = {Recently, an update of the Life Cycle Impact Assessment (LCIA) method ReCiPe was released: ReCiPe 2016. The aim of this study was to analyse the effect of using this update instead of the previous version: ReCiPe 2008. Do the absolute outcomes change significantly and if so, does this lead to different conclusions and result-based recommendations?}, - langid = {english}, - keywords = {Characterisation,Cradle-to-grave,Dutch food consumption,Endpoint,Life cycle impact assessment,Midpoint,Regionalisation}, - file = {/Users/fabio/Zotero/storage/HE3SS4LN/Dekker et al. - 2020 - A taste of the new ReCiPe for life cycle assessmen.pdf} -} - -@article{delanoeijeMeasuringCircularReuse2022, - title = {Measuring Circular Reuse Magnitude and Replacement Rate: {{A}} New Method}, - author = {Delanoeije, Joni and Bachus, Kris}, - year = {2022}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {184}, - pages = {106414}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106414}, - urldate = {2022-05-28} -} - -@article{delcarmenolmos-gomezMakingFutureTeachers2019, - title = {Making Future Teachers More Aware of Issues Related to Sustainability: {{An}} Assessment of Best Practices}, - author = {{del Carmen Olmos-G{\'o}mez}, Ma and {Estrada-Vidal}, Ligia Isabel and {Ruiz-Garz{\'o}n}, Francisca and {L{\'o}pez-Cordero}, Rafael and {Mohamed-Mohand}, Laila}, - year = {2019}, - month = dec, - journal = {Sustainability (Switzerland)}, - volume = {11}, - number = {24}, - publisher = {{MDPI AG}}, - issn = {20711050}, - doi = {10.3390/su11247222}, - urldate = {2020-06-07}, - abstract = {The aim of the present research was to uncover the opinions of future teachers about whether the formative knowledge of education for sustainability received in seminars during their practicums improved their competencies in sustainability and their values in educational teaching for their future classroom practice. The study entailed qualitative research with a thematic analysis. Semi-structured interviews comprising 14 questions, which were validated by 15 experts, were used to solicit the opinions of 52 future teachers with respect to the importance of sustainability and the development of intercultural competencies among their students. The information from the interviews was analyzed using thematic analysis on the basis of education for sustainable development (ESD). We conclude that the teachers' practicum placements and training experiences were very positive because a lecturing pedagogical approach, taught via practical application in a school environment by an expert of recognized prestige, can be a useful resource to develop awareness of both sustainable development and its education, as well as to learn didactic strategies to apply ESD, which addresses aspects that are relevant in multicultural contexts, such as tolerance and empathy.}, - keywords = {Education for sustainable development,Environmental education,Teacher training,Teacher training curriculum and teacher training programs,Teacher training prior to service,Teaching competencies}, - file = {/Users/fabio/Zotero/storage/S6A4KADK/full-text.pdf} -} - -@article{deleijsterEcosystemServicesTrajectories2021, - title = {Ecosystem Services Trajectories in Coffee Agroforestry in {{Colombia}} over 40 Years}, - author = {De Leijster, V. and Santos, M. J. and Wassen, M. W. and Camargo Garc{\'i}a, J. C. and Llorca Fernandez, I. and Verkuil, L. and Scheper, A. and Steenhuis, M. and Verweij, P. A.}, - year = {2021}, - month = apr, - journal = {Ecosystem Services}, - volume = {48}, - pages = {101246}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101246}, - urldate = {2021-04-21}, - abstract = {Agroforestry interventions may act as catalysts for ecosystem service development and changes in supply and therefore may rehabilitate degraded land. This study investigates the trajectories of ecosystem services in coffee systems with a different time since transition to agroforestry in Colombia, the interactions among ecosystem services, and the biotic and abiotic factors that explain them. Therefore, we study a chronosequence of agroforestry coffee farms, with 1\textendash 40 years since planting of shade trees. We found that aboveground carbon stock, habitat provisioning, timber volume and coffee bean quality followed positive asymptotic trajectories. Erosion control and pest control did not change over time. Coffee yield tended to decrease as the shade trees matured, but this was not significant. We found consistent positive relationships between carbon stock, erosion control and epiphyte richness. A trade-off between aboveground carbon stock and coffee yield was found for the first 10 years, while a positive relation between coffee yield and erosion control was found for the long term (10\textendash 20 years). Canopy cover best explained ecosystem service supply, but also farm agrochemical input management, altitude and slope influenced the supply. This study demonstrated that agroforestry can be used to rehabilitate ecosystem service supply.}, - keywords = {Agroforestry,Coffee,Colombia,ES bundles and trade-offs,Multiple ecosystem services,Rehabilitation trajectories,Restoration ecology}, - file = {/Users/fabio/Zotero/storage/E6IZ2R4G/full-text.pdf} -} - -@article{delgadilloDeterminingSuccessFactors2020, - title = {Determining Success Factors for Improving Rural Livelihood Strategies: How Can Participatory Social Network Mapping Help?}, - author = {Delgadillo, Estephania and Graef, Frieder and Schr{\"o}ter, Barbara and Halle, Mefor E}, - year = {2020}, - doi = {10.1080/19439342.2020.1788118}, - urldate = {2021-04-22}, - abstract = {The integration of upgrading strategies (UPS) as part of the livelihood strategies of small farmers is vital for enhancing their food systems. The success of the UPS implementation largely relies on the interactions among key actors. Understanding the complex social realities of farmers is essential for adapting strategies to the local context. Therefore, the objective of this study is to determine the impact of UPS on the livelihood of participants in two case study areas in Tanzania. We used a mixed-method approach to understand the relations between, roles, and motivations of relevant actors in the participatory implementation of their UPS using the Net-Map tool for social network analysis and focus group discussions. Our results reveal why the implementation of UPS improved people\textasciiacute s livelihoods and allowed us to derive some success factors. Motivations for participating in a UPS group differed to some extent among all UPS groups and all types of actors. Based on our results, we found that UPS allow participants to enhance their social networks within their communities and develop skills that improve their livelihood strategies , resulting in more diverse livelihood outcomes. This research provides a knowledge base for UPS considerations and other participatory actions with local subsistence stakeholders. ARTICLE HISTORY}, - keywords = {food security,net-map,Rural innovations,social network analysis,Sub-Saharan Africa,sustainable livelihoods}, - file = {/Users/fabio/Zotero/storage/5X5MGIGY/full-text.pdf} -} - -@inproceedings{delgadillojaimeCircularPSSStrategies2019, - title = {Circular {{PSS}} Strategies: {{An}} Exploration of the Integration of Territorial Resources}, - booktitle = {Proceedings of the {{International Conference}} on {{Engineering Design}}, {{ICED}}}, - author = {Delgadillo Jaime, Estephania Elizabeth and Reyes Carrillo, Tatiana and Baumgartner, Rupert}, - year = {2019}, - volume = {2019-August}, - pages = {3191--3200}, - publisher = {{Cambridge University Press}}, - issn = {22204342}, - doi = {10.1017/dsi.2019.326}, - urldate = {2021-04-22}, - abstract = {Product service systems (PSS) are frequently cited as key strategies in the transition towards the circular economy (CE). The main aim of the CE is sustainable development (SD), hence, this paper intends to highlight the importance of considering the territory in the design and implementation of circular PSS strategies for ensuring SD. This research is in an early stage, thus, a literature review was conducted to define the main characteristics of circular PSS, and the concepts of the territory, territorial and local resources from a PSS perspective. In addition, an analysis of the state-of-the-art approach of the integration of the territorial scale in the design and development of PSS strategies was conducted. This study contributes to the understanding of the territory and its relevance in the local value creation in circular PSS strategies. Furthermore, the results highlight the relevant role of collaboration and the importance of intangible resources in the mobilisation of other resources in the design of circular PSS strategies.}, - keywords = {Circular economy,Local resources,Product-Service Systems (PSS),Sustainability,Territorial resources}, - file = {/Users/fabio/Zotero/storage/P6DUNS5G/full-text.pdf} -} - -@article{Delgado2020, - title = {Innovation {{Spaces}} in {{Universities}}: {{Support}} for {{Collaborative Learning}}}, - author = {Delgado, Lorena and Galvez, Daniel and Hassan, Alaa and Palominos, Pedro and Morel, Laure}, - year = {2020}, - journal = {Journal of Innovation Economics Management}, - doi = {10.3917/jie.031.0123}, - file = {/Users/fabio/Zotero/storage/98Q93BIK/Innovation Spaces in Universities- Support for Collaborative Learning.pdf} -} - -@article{delgadoHumanWellbeingHistorical2017, - title = {Human Well-Being and Historical Ecosystems: {{The}} Environmentalist's Paradox Revisited}, - author = {Delgado, Luisa E. and Mar{\'i}n, V{\'i}ctor H.}, - year = {2017}, - month = jan, - journal = {BioScience}, - volume = {67}, - number = {1}, - pages = {5--6}, - publisher = {{Oxford University Press}}, - issn = {15253244}, - doi = {10.1093/biosci/biw132}, - urldate = {2021-06-10}, - file = {/Users/fabio/Zotero/storage/WYBFX77T/full-text.pdf} -} - -@article{delgadoSupplyChainEconomy2020, - title = {The Supply Chain Economy: {{A}} New Industry Categorization for Understanding Innovation in Services}, - author = {Delgado, Mercedes and Mills, Karen G.}, - year = {2020}, - month = oct, - journal = {Research Policy}, - volume = {49}, - number = {8}, - pages = {104039}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104039}, - urldate = {2020-07-14}, - abstract = {An active debate has centered on the importance of manufacturing for driving innovation in the U.S. economy. This paper offers an alternative framework that focuses on the role of suppliers of goods and services (the ``supply chain economy'') in national performance. We identify three conceptual attributes of suppliers that make them important for innovation: they produce specialized inputs; have more downstream linkages with other industries; and benefit especially from co-locating with their customers, creating externalities. Using the 2002 Benchmark Input-Output Accounts, we estimate a new industry categorization that separates supply chain (SC) industries (i.e., those that sell primarily to businesses or government) from business-to-consumer (B2C) industries (i.e., those that sell primarily to consumers). We find that the supply chain economy is a distinct and large segment of the economy that includes primarily service providers. The SC industries, especially traded services, have higher average wages than B2C industries. The supply chain economy also has higher innovative activity as captured by the concentration of the vast majority of STEM jobs (primarily in traded services) and patents (in manufacturing). Finally, we find that employment in the economy has evolved from manufacturing into two distinct types of services (1998\textendash 2015): SC Traded Services (with the highest STEM intensity and wages) versus B2C Main Street (with the lowest STEM intensity and wages).}, - keywords = {Business-to-consumer industries,Economic growth,Innovation,Services,Supply chain industries} -} - -@article{DelGiudice2019, - title = {Are Social Enterprises Technological Innovative? {{A}} Quantitative Analysis on Social Entrepreneurs in Emerging Countries}, - author = {Del Giudice, Manlio and {Garcia-Perez}, Alexeis and Scuotto, Veronica and Orlando, Beatrice}, - year = {2019}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {148}, - pages = {119704}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.07.010} -} - -@article{DelMarCastroLopez2014, - title = {Assessing Changes on Poly(Ethylene Terephthalate) Properties after Recycling: {{Mechanical}} Recycling in Laboratory versus Postconsumer Recycled Material}, - author = {Del Mar Castro L{\'o}pez, Mar{\'i}a and Ares Pernas, Ana Isabel and Abad L{\'o}pez, Ma Jos{\'e} and Latorre, Aurora Lasagabaster and L{\'o}pez Vilari{\~n}o, J. M. and Gonz{\'a}lez Rodr{\'i}guez, Ma Victoria}, - year = {2014}, - journal = {Materials Chemistry and Physics}, - volume = {147}, - number = {3}, - pages = {884--894}, - issn = {02540584}, - doi = {10.1016/j.matchemphys.2014.06.034}, - abstract = {Keeping rheological, mechanical and thermal properties of virgin poly(ethylene terephthalate), PET, is necessary to assure the quality of second-market applications. A comparative study of these properties has been undertaken in virgin, mechanical recycled and commercial recycled PET samples. Viscoelastic characterization was carried out by rheological measurements. Mechanical properties were estimated by tensile and Charpy impact strength tests. Thermal properties and crystallinity were evaluated by differential scanning calorimetry and a deconvolution procedure was applied to study the population of the different crystals. Molecular conformational changes related to crystallinity values were studied by FTIR spectroscopy. Variations in average molecular weight were predicted from rheology. Besides, the presence-absence of linear and cyclic oligomeric species was measured by mass spectrometry techniques, as MALDI-TOF. Mechanical recycled PET undergoes a significant decline in rheological, mechanical and thermal properties upon increasing the number of reprocessing steps. This is due to the cleavage of the ester bonds with reduction in molar mass and raise in cyclic oligomeric species, in particular [GTc]n and [GTc]n-G type. Chain shortening plus enrichment in trans conformers favour the crystallization process which occurs earlier and faster with modification in crystal populations. Additional physicochemical steps are necessary to preserve the main benefits of PET. \textcopyright{} 2014 Elsevier B.V. All rights reserved.}, - keywords = {Ageing,Chemical techniques,Mechanical properties,Polymers,Thermal properties}, - file = {/Users/fabio/Zotero/storage/ZZ6N2YLL/Assessing changes on poly(ethylene terephthalate) properties after recycling Mechanical recycling in laboratory versus postconsumer recy.pdf} -} - -@article{Delpierre2019, - title = {Simple {{Approach}} for a {{Self-Healable}} and {{Stiff Polymer Network}} from {{Iminoboronate-Based Boroxine Chemistry}}}, - author = {Delpierre, S{\'e}bastien and Willocq, Bertrand and Manini, Giuseppe and Lemaur, Vincent and Goole, Jonathan and Gerbaux, Pascal and Cornil, J{\'e}r{\^o}me and Dubois, Philippe and Raquez, Jean Marie}, - year = {2019}, - journal = {Chemistry of Materials}, - issn = {15205002}, - doi = {10.1021/acs.chemmater.9b00750}, - abstract = {Despite offering robust mechanical properties, polymer networks suffer from a lack of recyclability, reshaping, and healability. Designing stiff and remendable polymer networks that can repair under mild conditions remains a challenge to extend their field of applications. Herein, we describe a simple approach to design a nonisocyanate-based polyurethane network featuring multiresponsiveness (to humidity and temperature) and outstanding healing properties, as obtained by combining iminoboronate and boroxine chemistry. In spite of the presence of abundant dynamic bonds, the network has a high stiffness (Young's modulus of 551 MPa) and tensile strength (11 MPa). C=N iminoboronate and B\textendash O boroxine exchange reactions at high temperature enable efficient network recycling over multiple cycles without compromising its properties. Owing to these features, 3D objects could be designed and printed. The present approach provides excellent sustainable and high-performance substitution to conventional polyurethane networks requiring the use of toxic isocyanates.}, - file = {/Users/fabio/Zotero/storage/QNLGMEXZ/Simple Approach for a Self-Healable and StiffPolymer Network fromIminoboronate-Based Boroxine Chemistry.pdf} -} - -@article{delriocastroUnleashingConvergenceDigitalization2020, - title = {Unleashing the Convergence amid Digitalization and Sustainability towards Pursuing the {{Sustainable Development Goals}} ({{SDGs}}): {{A}} Holistic Review}, - author = {{del R{\'i}o Castro}, Gema and Gonz{\'a}lez Fern{\'a}ndez, Mar{\'i}a Camino and Colsa, {\'A}ngel Uruburu}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {122204}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122204}, - urldate = {2020-10-05} -} - -@article{demarchiPlasticPackagingGoes2020, - title = {Plastic Packaging Goes Sustainable: {{An}} Analysis of Consumer Preferences for Plastic Water Bottles}, - author = {De Marchi, Elisa and Pigliafreddo, Silvia and Banterle, Alessandro and Parolini, Marco and Cavaliere, Alessia}, - year = {2020}, - month = dec, - journal = {Environmental Science and Policy}, - volume = {114}, - pages = {305--311}, - publisher = {{Elsevier Ltd}}, - issn = {18736416}, - doi = {10.1016/j.envsci.2020.08.014}, - urldate = {2020-09-23}, - abstract = {The market of bottled water is projected to become the largest beverage category by volume worldwide. Consumption data are already impressive in many countries, with Italy leading the path in the European Union. Such market expansion will come with environmental costs, due to increasing plastics production and increasing bottle leakage in the environment. To tackle the problem consumer purchasing decision can make the difference. Using a hypothetical Discrete Choice Experiment this study explores consumer preferences and willingness to pay for plastic water bottles made of conventional plastic polymer and of more sustainable plastic alternatives. Additionally, by comparing two experimental conditions the study investigates whether information on plastic-related sustainability might affect consumer purchasing decisions. The results provide insights that could be relevant from a market and policy perspective. They indicate that Italian consumers prefer Bio-bottles water bottles with respect to common PET, being willing to pay more for these alternatives. Furthermore, recycled materials are dispreferred compared to virgin plastics and information provision seems to help consumers discriminating across different plastic types although it is not effective in increasing willingness to pay.}, - keywords = {bioplastics,Discrete Choice Experiment,information treatment,packaging,plastic pollution,recycled plastics} -} - -@article{Demets2021, - title = {Addressing the Complex Challenge of Understanding and Quantifying Substitutability for Recycled Plastics}, - author = {Demets, Ruben and Van Kets, Karen and Huysveld, Sophie and Dewulf, Jo and De Meester, Steven and Ragaert, Kim}, - year = {2021}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {174}, - pages = {105826}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105826}, - urldate = {2021-08-24}, - file = {/Users/fabio/Zotero/storage/TFMT66XN/full-text.pdf} -} - -@article{demetsDevelopmentApplicationAnalytical2020, - title = {Development and Application of an Analytical Method to Quantify Odour Removal in Plastic Waste Recycling Processes}, - author = {Demets, Ruben and Roosen, Martijn and Vandermeersch, Lore and Ragaert, Kim and Walgraeve, Christophe and De Meester, Steven}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104907}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104907}, - urldate = {2020-05-27} -} - -@article{DeMoor2010a, - title = {User-Driven Innovation? {{Challenges}} of User Involvement in Future Technology Analysis}, - author = {De Moor, Katrien and Berte, Katrien and De Marez, Lieven and Joseph, Wout and Deryckere, Tom and Martens, Luc}, - year = {2010}, - journal = {Science and Public Policy}, - volume = {37}, - number = {1}, - pages = {51--61}, - abstract = {The shift from the traditional push towards more user-driven innovation strategies in the information and communications technologies domain has urged companies to place the user at the core of their innovation process in a more systematic way. In this paper we reflect on the implications of this new innovation context for traditional product development processes. Given these implications, two challenges are discussed that are crucial to true user-driven innovation, i.e. the challenge of continuously involving the user and the need for tools to facilitate the integration of knowledge into the increasingly interdisciplinary development process. Drawing on our own experiences in the interdisciplinary Research On Mobile Applications and Services (ROMAS) project, which focused on future mobile applications in a living lab setting, we illustrate how the two challenges can be tackled.} -} - -@article{demoraisCircularEconomyEngagement2021, - title = {Circular Economy Engagement: {{Altruism}}, Status, and Cultural Orientation as Drivers for Sustainable Consumption}, - author = {{de Morais}, Larissa Herminio Lopes and Pinto, Diego Costa and {Cruz-Jesus}, Frederico}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {523--533}, - publisher = {{Elsevier B.V.}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.01.019}, - urldate = {2021-02-14}, - abstract = {The Circular Economy (CE) is posited as a solution to the rise of environmental impact with economic prosperity by introducing alternative systems of production, consumption, and disposal. Although circular economy has received recent attention, CE engagement is still underdeveloped, suggesting the need for data-driven information supporting its drivers to achieve a higher level of implementation. Thus, we developed a conceptual model for understanding the antecedents of CE engagement and green buying, exploring the effects that need for social status, pure and competitive altruism play as drivers of those. The model was empirically tested it using partial least squares structural equation modeling. Our substantive findings indicate that pure altruism is the main motivation driving CE engagement and green buying, while competitive altruism and need for social status, did not reach significance. However, we noted that both types of altruism moderate the effect of the need for social in green buying behavior. Additionally, we found that CE engagement is a significant driver of green buying. Overall, we were able to explain 20\% of the variation in CE engagement, and 52\% in green buying behavior. By combining identity goals and consumer's motivation for engaging in CE, we contribute with knowledge for the elaboration of strategies and public policies for enhancing and stimulating circular economy acceptance from a consumer's perspective.}, - keywords = {Altruism,Circular Economy,Consumer Engagement,Culture Orientation} -} - -@article{demssieThinkOutsideEuropean2019, - title = {Think Outside the {{European}} Box: {{Identifying}} Sustainability Competencies for a Base of the Pyramid Context}, - author = {Demssie, Yared Nigussie and Wesselink, Renate and Biemans, Harm J.A. and Mulder, Martin}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {221}, - pages = {828--838}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.255}, - urldate = {2020-06-18}, - abstract = {The complex and global nature of unsustainability requires concerted efforts of sustainability change agents from developed and developing countries all over the world. Various attempts have been made to define competencies needed for change agents to effectively contribute to sustainable development. However, most of the studies on sustainability competencies are Eurocentric in focus. Therefore, it is unclear if a base of the pyramid context would require a different set of competencies. This context is characterized by low per capita income, limited infrastructure, and rural population. To fill this gap, we conducted a Delphi study in two rounds in Ethiopia, as a country at the base of the pyramid. Experts (n = 33) from academia and the industry rated and confirmed seven competencies from the literature as being generally important for sustainable development. Additionally, they identified eight sustainability y competencies specifically important for the Ethiopian context, and thus potentially for other countries with the features of base of the pyramid context. Systems thinking and transdisciplinary competence gained the highest ratings. A subsequent specific literature search revealed that previous studies in contexts other than the base of the pyramid context also identified some of the eight additional sustainability competencies. This is important for future studies regarding the universal nature of certain sustainability competencies. The study brought together three fields of research: sustainability, competence, and base of the pyramid context. Our findings contribute to the theory of professional competence by showing that certain sustainability competencies can be of generic nature, independent of socioeconomic context, whereas others are context-specific. In addition, the sustainability competencies may serve as intended learning outcomes of education and training and development programs for sustainability.}, - keywords = {Base of the pyramid,Corporate social responsibility,Delphi,Sustainability,Sustainability competence,Sustainable development} -} - -@article{Deng2019, - title = {Optimal Strategy for Enterprises' Green Technology Innovation from the Perspective of Political Competition}, - author = {Deng, Yaling and You, Daming and Wang, Jingjing}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {930--942}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.248}, - urldate = {2020-05-15}, - abstract = {Different local governments engage in strategic interactions when they compete for resources to promote regional economic development under the background of `political tournaments'. Although many scholars have studied the impact of political competition among local governments on the environmental governance effect, they have paid less attention to the internal mechanism of the environmental benefits arising from political competition. Under the two scenarios of considering and not considering political competition, this paper uses Stackelberg game theory and optimization theory to analyse enterprises' optimal green technology innovation strategies. In addition, the impact of key factors is analysed based on the decision-making modes of cost-sharing and revenue-sharing, without cost-sharing and revenue-sharing, and centralized decision-making. This paper draws the following main conclusions: (1) Considering the influence of political competition, the optimal green technology innovation strategies of local governments and enterprises differ for different modes. (2) Political competition not only directly affects enterprises' optimal level of green technology innovation but also indirectly affects it by influencing the optimal investment ratio of environmental governance. The inverted U-shaped relationship between political competition and enterprises' optimal level of green technology innovation is related to the incentive coefficient of local government investment behaviour set by the central government. Controlling for the relative size of the incentive coefficient of local government investment in environmental governance and economic development can promote the positive impact of political competition on enterprises' optimal level of green technology innovation. (3) The decision-making mode of enterprises and local governments and environmental decentralization have significant effects on the optimal level of green technology innovation, which should be considered when the central government formulates effective environmental policies.}, - keywords = {Environmental decentralization,Green technology innovation,Political competition,Stackelberg game theory} -} - -@article{denteCOVID19PandemicPositive2020, - title = {{{COVID-19}}: {{A}} Pandemic with Positive and Negative Outcomes on Resource and Waste Flows and Stocks}, - author = {Dente, S.M.R. and Hashimoto, S.}, - year = {2020}, - month = jun, - journal = {Resources, Conservation and Recycling}, - pages = {104979}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104979}, - urldate = {2020-06-07}, - file = {/Users/fabio/Zotero/storage/TPMZ9367/full-text.pdf} -} - -@article{DeOliveira2020, - title = {Nano and Micro Level Circular Economy Indicators: {{Assisting}} Decision-Makers in Circularity Assessments}, - author = {{de Oliveira}, Carla Tognato and Dantas, Thales Eduardo Tavares and Soares, Sebasti{\~a}o Roberto}, - year = {2021}, - month = apr, - journal = {Sustainable Production and Consumption}, - volume = {26}, - pages = {455--468}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.11.024}, - urldate = {2020-12-07}, - abstract = {This is a PDF file of an article that has undergone enhancements after acceptance, such as the addition of a cover page and metadata, and formatting for readability, but it is not yet the definitive version of record. This version will undergo additional copyediting, typesetting and review before it is published in its final form, but we are providing this version to give early visibility of the article. Please note that, during the production process, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.}, - file = {/Users/fabio/Zotero/storage/V676VJXP/Tognato de Oliveira, Eduardo Tavares Dantas, Roberto Soares - 2020 - Journal Pre-proof Nano and Micro Level Circular Economy Indicators.pdf} -} - -@article{deoliveiraTrendsSustainabilityAssessment2023, - title = {Trends in Sustainability Assessment Supported by Geographic Information Systems: {{A}} Bibliometric Approach}, - shorttitle = {Trends in Sustainability Assessment Supported by Geographic Information Systems}, - author = {{de Oliveira}, Victor Tomaz and Teixeira, Denilson and Rocchi, Lucia and Boggia, Antonio}, - year = {2023}, - month = mar, - journal = {Environmental Science \& Policy}, - volume = {141}, - pages = {117--125}, - issn = {14629011}, - doi = {10.1016/j.envsci.2023.01.003}, - urldate = {2023-02-12}, - langid = {english} -} - -@article{DePaoli2011, - title = {Produsage in Hybrid Networks: Sociotechnical Skills in the Case of {{Arduino}}}, - author = {De Paoli, Stefano and Storni, Cristiano}, - year = {2011}, - month = apr, - journal = {New Rev. Hypermedia Multimed.}, - volume = {17}, - number = {1}, - pages = {31--52}, - issn = {1361-4568}, - doi = {10.1080/13614568.2011.552641} -} - -@article{Dermine-Brullot2020, - title = {What Sustainability for Territorial Development? {{A}} Reflection on the Spatial Components of Circular Economy}, - author = {{Dermine-Brullot}, Sabrina and Torre, Andre}, - year = {2020}, - month = apr, - journal = {Natures Sciences Societes}, - volume = {28}, - number = {2}, - pages = {108--117}, - publisher = {{EDP Sciences}}, - issn = {17652979}, - doi = {10.1051/nss/2020034}, - urldate = {2021-09-10}, - abstract = {Our paper aims to provide elements of reflection on the spatial and territorial dimensions in circular economy processes and to question their contribution to a sustainable territorial development. We start by examining the territorial roots of the major circular economy strategies defined by the French public authorities and devote a special place to industrial and territorial ecology, which shows a stronger interest in the spatial dimensions of circular processes. In the second part, we question the circular economy's actual capacity to contribute to the sustainable development of society as a whole and to its implementation at the local level: after proposing a definition of sustainable territorial development, we assess the various existing strategies based on the principles thus defined.}, - keywords = {Circular economy,Public policies,Sustainable development,Territory,Transition}, - file = {/Users/fabio/Zotero/storage/VZLP8VYV/full-text.pdf} -} - -@article{DeRomph2018, - title = {{{REACH}} in a Circular Economy: {{The}} Obstacles for Plastics Recyclers and Regulators}, - author = {{de R{\"o}mph}, Thomas J. and Van Calster, Geert}, - year = {2018}, - month = nov, - journal = {Review of European, Comparative \& International Environmental Law}, - volume = {27}, - number = {3}, - pages = {267--277}, - issn = {20500386}, - doi = {10.1111/reel.12265} -} - -@article{deromphREACHCircularEconomy2018, - ids = {deromph2018a}, - title = {{{REACH}} in a Circular Economy: {{The}} Obstacles for Plastics Recyclers and Regulators}, - shorttitle = {{{REACH}} in a Circular Economy}, - author = {{de R{\"o}mph}, Thomas J. and Van Calster, Geert}, - year = {2018}, - journal = {Review of European, Comparative \& International Environmental Law}, - volume = {27}, - number = {3}, - pages = {267--277}, - issn = {2050-0394}, - doi = {10.1111/reel.12265}, - urldate = {2023-09-05}, - abstract = {The European Union (EU) Regulation on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) applies to chemical substances on their own, in mixtures or in articles. Manufacturers using either virgin or recycled substances have to comply with these rules, which do not explicitly distinguish between the two sources. This contribution considers REACH in the circular economy, with a particular focus on its role in the circularity of plastics through recycling. We show that the lack of information about the specific composition of the plastic waste arriving at the recycling facility greatly affects the ability of recyclers to comply with REACH. Over and above several other obstacles plastics recyclers encounter, this creates legal uncertainty about the use of recycled plastics and uncertainty about their market outlet. The recycling industry can in effect either choose to carry on in a regulatory vacuum or to continue the old, linear as opposed to circular scenario. On the face of it, this hardly supports the circular economy philosophy. We reflect how EU regulators may reconcile the objectives of creating a low-risk life cycle of plastics (REACH) with the creation of a cycle with enough throughputs of plastics (Waste Framework Directive). We also propose practical solutions.}, - copyright = {\textcopyright{} 2018 John Wiley \& Sons Ltd}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/T8WGZ6GN/de Römph_Van Calster_2018_REACH in a circular economy.pdf;/Users/fabio/Zotero/storage/97GFVLYM/reel.html} -} - -@article{Dertinger2020, - title = {Technical Pathways for Distributed Recycling of Polymer Composites for Distributed Manufacturing: {{Windshield}} Wiper Blades}, - author = {Dertinger, Samantha C. and Gallup, Nicole and Tanikella, Nagendra G. and Grasso, Marzio and Vahid, Samireh and Foot, Peter J.S. and Pearce, Joshua M.}, - year = {2020}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {157}, - pages = {104810}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104810}, - file = {/Users/fabio/Zotero/storage/UGJG9D7P/Technical pathways for distributed recycling of polymer composites for distributed manufacturing- Windshield wiper blades.pdf} -} - -@article{Desa2012, - title = {Waste {{Education}} and {{Awareness Strategy}}: {{Towards Solid Waste Management}} ({{SWM}}) {{Program}} at {{UKM}}}, - author = {Desa, Asmawati and Kadir, Nor Ba'yah Abd and Yusooff, Fatimah}, - year = {2012}, - journal = {Procedia - Social and Behavioral Sciences}, - volume = {59}, - pages = {47--50}, - issn = {18770428}, - doi = {10.1016/j.sbspro.2012.09.244}, - abstract = {Most of the environmental problems could be caused by manmade pollution which not only damage natural resources, but also its effect is also dangerous. In order to encourage waste minimisation, re-use, recycling, and reduce, have been introduced in UKM. Critical to the success of these programs are fullfill by participation and commitment by the members of UKM. The aim of this study was to assess the assess the attitudes and behaviour concerning SWM among first year students (n= 591) using questionnaire survey. It was determined that 60\% of the students had positive attitude towards this program. Results also indicated that all of the students showed high levels of practices and responsibility regarding SWM. However, there is still the need for the university to encourage through education and awareness on managing solid waste in the campus among the first year students. To ensure compliance with SWM program, UKM must make sure participation in the program it introduces remains high. This can be done by raising the students' education and awareness level of waste. To achieve this, a carefully thought-out waste education and awareness strategy must be developed in order to change students' habits and behaviour and traditions.}, - isbn = {6038921354}, - keywords = {Attitude,awareness strategy,behaviour,solid waste management,waste education}, - file = {/Users/fabio/Zotero/storage/DUIDX2SM/Waste Education and Awareness Strategy Towards Solid Waste Management (SWM) Program at UKM.pdf} -} - -@article{desatelesEffectVirginPP2023, - title = {Effect of {{Virgin PP Substitution}} with {{Recycled Plastic Caps}} in the {{Manufacture}} of a {{Product}} for the {{Telephony Sector}}}, - author = {{de S{\'a} Teles}, Beatriz Arioli and Cunha, Isadora Luiza Cl{\'i}maco and {da Silva Neto}, Manoel Lisboa and Wiebeck, H{\'e}lio and Valera, Ticiane Sanches and {de Souza}, Simara Silveira and {de Oliveira Schmitt}, Alfredo Felipe and Oliveira, Vinicius and Kulay, Luiz}, - year = {2023}, - month = jun, - journal = {Recycling}, - volume = {8}, - number = {3}, - pages = {51}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2313-4321}, - doi = {10.3390/recycling8030051}, - urldate = {2023-06-13}, - abstract = {This study investigated the effects of partial and total substitutions of fossil polypropylene (PP) for recycled plastic cap equivalents in the manufacture of signage labels used by the telephone industry. Four alternative scenarios to using virgin PP were evaluated considering recycled material in flake and pellet forms based on environmental performance, degree of circularity, and technical behavior. The environmental analysis was performed by the life cycle assessment (LCA) technique, and for all impact categories evaluated, using recycled material to replace the virgin reduced adverse effects on the environment. The most significant results in this dimension, with gains of 81\% in the Global Environmental Indicator, occurred when recycled PP flakes entirely replaced the fossil polymer. Once again, the highest values of the Materials Circularity Indicator (MCI) were achieved by scenarios with full recycled resin in processing the tags; however, this product must also be reused. The mechanical behavior of the tags measured technical performance, and in this case, the product made with virgin PP outperformed the recycled options except for elongation. An analysis that integrated the three dimensions into a single performance index pointed to the complete substitution of virgin material for recycled as the most balanced option.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {circular economy,environmental performance,life cycle assessment,Material Circularity Indicator,plastic caps,recycling,technical performance,waste management}, - file = {/Users/fabio/Zotero/storage/EZYTFKJM/de Sá Teles et al. - 2023 - Effect of Virgin PP Substitution with Recycled Pla.pdf} -} - -@article{DesignNonAssemblyMechanisms2021, - title = {Design of {{Non-Assembly Mechanisms}}: {{A State-of-the-Art Review}}}, - year = {2021}, - month = jan, - journal = {Additive Manufacturing}, - pages = {101846}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.101846}, - urldate = {2021-01-12}, - file = {/Users/fabio/Zotero/storage/JAYF9LZY/full-text.pdf} -} - -@article{desilvaAddressingSocietalChallenges2021, - title = {Addressing Societal Challenges through the Simultaneous Generation of Social and Business Values: {{A}} Conceptual Framework for Science-Based Co-Creation}, - author = {De Silva, Muthu and Gokhberg, Leonid and Meissner, Dirk and Russo, Margherita}, - year = {2021}, - month = mar, - journal = {Technovation}, - pages = {102268}, - publisher = {{Elsevier Ltd}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2021.102268}, - urldate = {2021-04-21}, - abstract = {The paper focuses on a key uniqueness of the simultaneous generation of social and business value - across science, technology and society - involving academics, businesses, policy makers, innovation intermediaries, NGOs and citizens that share and integrate assets in developing solutions to address economic and societal challenges. By contrasting with a broad literature using the term `co-creation' to denote close working relationship between actors, the paper outlines a conceptual framework explaining how the diversity of agents involved, their motivations and goals, and incentive structures in which they operate impact on science-based co-creation. This multidimensional perspective is discussed with regard to the scope of innovation, reach and types of values that are generated, and the distinctive features to be considered when both social and business value are at the core of collaboration. Policy implications to support science-based co-creation are discussed with regard to the rationale for public interventions and the critical dimensions of policy implementation and assessment. It highlights that policy design aiming at supporting societal challenges through co-creation should address mechanisms to integrate tangible and intangible inputs, define suitable operational models and enhance specific capabilities and practices.}, - keywords = {Industry-science linkages,Knowledge triangle co-creation,Open innovation,R\&D collaboration,Social values,Triple helix} -} - -@article{desingResourcePressureCircular2021, - title = {Resource Pressure \textendash{} {{A}} Circular Design Method}, - author = {Desing, Harald and Braun, Gregor and Hischier, Roland}, - year = {2021}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {164}, - pages = {105179}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105179}, - urldate = {2020-10-05}, - file = {/Users/fabio/Zotero/storage/QDYRPURF/full-text.pdf} -} - -@article{Desmarchelier2020, - title = {Mapping Social Innovation Networks: {{Knowledge}} Intensive Social Services as Systems Builders}, - author = {Desmarchelier, Beno{\^i}t and Djellal, Faridah and Gallouj, Fa{\"i}z}, - year = {2020}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {157}, - pages = {120068}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120068}, - urldate = {2020-05-08}, - abstract = {Social innovations are often seen as the product of social entrepreneurs. This paper instead asserts that social innovations are also routinized. This is the result of the appearance of a new type of actors: Knowledge Intensive Social Services (KISS). Like Knowledge Intensive Business Services (KIBS), KISS are consultancy organizations that provide their clients with specific knowledge to assist them in their innovation efforts. KISS differ from KIBS in that KISS agents are specializing in social innovations. KISS also involve third party agents - public and private - in the service relationship. We show that these connecting activities are creating growing social innovation networks. Despite being very dependent on the initial KISS actor, such networks can become more robust by interacting with other social innovation networks.}, - keywords = {Knowledge intensive social services,Networks,Social innovations,Technological regimes}, - file = {/Users/fabio/Zotero/storage/WY8HY6UP/full-text.pdf} -} - -@article{desousaProsConsPlastic2020, - title = {Pros and {{Cons}} of {{Plastic}} during the {{COVID-19 Pandemic}}}, - author = {{de Sousa}, Fabiula Danielli Bastos}, - year = {2020}, - month = oct, - journal = {Recycling}, - volume = {5}, - number = {4}, - pages = {27}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2313-4321}, - doi = {10.3390/recycling5040027}, - urldate = {2020-10-28}, - abstract = {{$<$}p{$>$}Since the beginning of the first cases of the new coronavirus, opinions and laws on the use of plastic materials have been questioned around the world. Their importance in the manufacture of hospital devices and personal protective equipment (PPE) is unquestionable, as they contribute largely to the reduction of the virus spread, helping health systems from all edges of the world and, most importantly, saving lives. However, the same material that is a protector, becomes a polluter when inadequately disposed of in the environment, generating or worsening socio-environmental problems, such as pollution of water bodies by plastic. A critical overview of the role of plastic during the COVID-19 pandemic is provided in this paper. A future panorama is attempted to be outlined. The real possibility of the virus spread from the use of plastic is discussed, as well as the recycling of plastic during the pandemic, correlating its use with problems that it may cause.{$<$}/p{$>$}}, - keywords = {COVID-19,environmental problems,plastic,public health,recycling,virus spread}, - file = {/Users/fabio/Zotero/storage/Z8K5UC4Q/full-text.pdf} -} - -@article{DeSouza2019, - title = {Towards {{Regenerative Supply Networks}}: A Design Framework Proposal}, - author = {{de Souza}, Vitor and {Bloemhof-Ruwaard}, Jacqueline M. and Borsato, Milton}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {221}, - pages = {145--156}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.178}, - keywords = {regenerative development,transdisciplinary research}, - file = {/Users/fabio/Zotero/storage/KFSJY49B/Towards Regenerative Supply Networks a design framework proposal.pdf} -} - -@article{DeSouzaJunior2020, - title = {Measuring the Environmental Performance of a Circular System: {{Emergy}} and {{LCA}} Approach on a Recycle Polystyrene System}, - author = {{de Souza Junior}, Henrique Rogerio Antunes and Dantas, Thales Eduardo Tavares and Zanghelini, Guilherme Marcelo and Cherubini, Edivan and Soares, Sebasti{\~a}o Roberto}, - year = {2020}, - month = jul, - journal = {Science of The Total Environment}, - volume = {726}, - pages = {138111}, - issn = {00489697}, - doi = {10.1016/j.scitotenv.2020.138111} -} - -@article{desouzamachadoMicroplasticsEmergingThreat2018, - title = {Microplastics as an Emerging Threat to Terrestrial Ecosystems}, - author = {{de Souza Machado}, Anderson Abel and Kloas, Werner and Zarfl, Christiane and Hempel, Stefan and Rillig, Matthias C.}, - year = {2018}, - month = apr, - journal = {Global Change Biology}, - volume = {24}, - number = {4}, - pages = {1405--1416}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1365-2486}, - doi = {10.1111/GCB.14020}, - urldate = {2022-01-13}, - abstract = {Microplastics (plastics {$<$}5~mm, including nanoplastics which are {$<$}0.1~{$\mu$}m) originate from the fragmentation of large plastic litter or from direct environmental emission. Their potential impacts in terrestrial ecosystems remain largely unexplored despite numerous reported effects on marine organisms. Most plastics arriving in the oceans were produced, used, and often disposed on land. Hence, it is within terrestrial systems that microplastics might first interact with biota eliciting ecologically relevant impacts. This article introduces the pervasive microplastic contamination as a potential agent of global change in terrestrial systems, highlights the physical and chemical nature of the respective observed effects, and discusses the broad toxicity of nanoplastics derived from plastic breakdown. Making relevant links to the fate of microplastics in aquatic continental systems, we here present new insights into the mechanisms of impacts on terrestrial geochemistry, the biophysical environment, and ecotoxicology. Broad changes in continental environments are possible even in particle-rich habitats such as soils. Furthermore, there is a growing body of evidence indicating that microplastics interact with terrestrial organisms that mediate essential ecosystem services and functions, such as soil dwelling invertebrates, terrestrial fungi, and plant-pollinators. Therefore, research is needed to clarify the terrestrial fate and effects of microplastics. We suggest that due to the widespread presence, environmental persistence, and various interactions with continental biota, microplastic pollution might represent an emerging global change threat to terrestrial ecosystems.}, - pmid = {29245177}, - keywords = {environmental health,global change,microplastics,nanoplastics,pollution,soil geochemistry}, - file = {/Users/fabio/Zotero/storage/3GXDB99X/full-text.pdf} -} - -@article{desouzamachadoMicroplasticsTheirEffects2020, - title = {Microplastics and {{Their Effects}} on {{Soil Function}} as a {{Life-Supporting System}}}, - author = {{de Souza Machado}, Anderson Abel and Horton, Alice A. and Davis, Taylor and Maa{\ss}, Stefanie}, - year = {2020}, - journal = {Handbook of Environmental Chemistry}, - volume = {95}, - pages = {199--222}, - publisher = {{Springer, Cham}}, - issn = {1867979X}, - doi = {10.1007/698_2020_450}, - urldate = {2022-01-13}, - abstract = {Particles play important roles in terrestrial systems, where the natural soil environment provides a complex habitat in which the three-dimensional organization of mineral and organic matter is combined to a diverse array of water levels, microscopic life forms, and their metabolites. Soils are the foundation for most land-based life and terrestrial ecosystem services that benefit humans. When plastics arrive at the soil, their nonnatural structure, distinct chemical composition, and unique surface properties trigger a series of abrupt environmental changes in the soil. Indeed, the current evidence suggests changes in the fundamental physical, chemical, and microbiological properties of the soils. Consequently, water and other biogeochemical cycles, as well as plant performance and animal health, can be affected. In this chapter, we present the recent advances in understanding how microplastics can change elementary properties of soil systems, such as soil aggregation and structure. This is discussed jointly with the linked effects in the microbial activity and function. Then, we address the recent studies regarding the effects of micro- and nanoplastics on plants and animals. Finally, we elaborate the properties of the various types of microplastics, soil processes, and soil organisms that are probably influencing the observed effects. We conclude by highlighting that current scientific information is not enough to devise solid risk assessments on microplastics in soils and suggest research directions to fulfill this gap.}, - keywords = {Biogeochemistry,Environmental change,Microbiome,Plants,Soil fauna} -} - -@incollection{Despeisse2015, - title = {The {{Role}} of {{Additive Manufacturing}} in {{Improving Resource Efficiency}} and {{Sustainability}}}, - booktitle = {{{IFIP Advances}} in {{Information}} and {{Communication Technology}}}, - author = {Despeisse, M{\'e}lanie and Ford, Simon}, - year = {2015}, - volume = {460}, - pages = {129--136}, - issn = {18684238}, - doi = {10.1007/978-3-319-22759-7_15}, - abstract = {Despite the global scale, the wide range of courses and the high number of enrollments, some challenges have been emerging for the universe of the MOOCs (Massive Open Online Courses), especially those related to project and management aspects. This article aims to identify the main problems faced by the managers of the MOOCs. Hence, an exploratory study was carried out through the analysis of existing publications in academic databases. The results show that after the survey it was possible to identify and analyze six problems, the main one of which was the very low completion rate of this type of course.}, - isbn = {978-3-319-22758-0}, - keywords = {3D printing,Additive manufacturing,Sustainability}, - file = {/Users/fabio/Zotero/storage/DIQRXKLK/The role of additive manufacturing in improving resource efficiency and sustainability.pdf} -} - -@article{Despeisse2016, - title = {Unlocking Value for a Circular Economy through {{3D}} Printing: {{A}} Research Agenda}, - author = {Despeisse, M. and Baumers, M. and Brown, P. and Charnley, F. and Ford, S.J. and Garmulewicz, A. and Knowles, S. and Minshall, T.H.W. and Mortara, L. and {Reed-Tsochas}, F.P. and Rowley, J.}, - year = {2017}, - month = feb, - journal = {Technological Forecasting and Social Change}, - volume = {115}, - eprint = {1011.1669v3}, - pages = {75--84}, - publisher = {{Elsevier B.V.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2016.09.021}, - abstract = {The circular economy (CE) aims to radically improve resource efficiency by eliminating the concept of waste and leading to a shift away from the linear take-make-waste model. In a CE, resources are flowing in a circular manner either in a biocycle (biomass) or technocycle (inorganic materials). While early studies indicate that 3D printing (3DP) holds substantial promise for sustainability and the creation of a CE, there is no guarantee that it will do so. There is great uncertainty regarding whether the current trajectory of 3DP adoption is creating more circular material flows or if it is leading to an alternative scenario in which less eco-efficient localised production, demands for customised goods, and a higher rate of product obsolescence combine to bring about increased resource consumption. It is critical that CE principles are embedded into the new manufacturing system before the adoption of 3DP reaches a critical inflection point in which negative practices become entrenched. This paper, authored by both academic and industry experts, proposes a research agenda to determine enablers and barriers for 3DP to achieve a CE. We explore the two following overarching questions to discover what specific issues they entail: (1) How can a more distributed manufacturing system based on 3DP create a circular economy of closed-loop material flows? (2) What are the barriers to a circular 3D printing economy? We specifically examine six areas-design, supply chains, information flows, entrepreneurship, business models and education-with the aim of formulating a research agenda to enable 3DP to reach its full potential for a CE.}, - archiveprefix = {arxiv}, - isbn = {9788578110796}, - pmid = {25246403}, - keywords = {3D printing,Additive manufacturing,Circular economy,Research agenda,Sustainability}, - file = {/Users/fabio/Zotero/storage/8XL3LZ6G/Unlocking value for a circular economy through 3D printing A research agenda.pdf} -} - -@article{Despeisse2017, - title = {Sustainable {{Value Roadmapping Framework}} for {{Additive Manufacturing}}}, - author = {Despeisse, M{\'e}lanie and Yang, Miying and Evans, Steve and Ford, Simon and Minshall, Tim}, - year = {2017}, - journal = {Procedia CIRP}, - volume = {61}, - pages = {594--599}, - publisher = {{The Author(s)}}, - issn = {22128271}, - doi = {10.1016/j.procir.2016.11.186}, - keywords = {3d printing,additive manufacturing,framework,roadmapping,sustainability,sustainable value,tool development}, - file = {/Users/fabio/Zotero/storage/ZKS4UEFH/Sustainable Value Roadmapping Framework for Additive Manufacturing.pdf} -} - -@article{Despeisse2017a, - title = {Skills and Education for Additive Manufacturing: {{A}} Review of Emerging Issues}, - author = {Despeisse, M{\'e}lanie and Minshall, Tim}, - year = {2017}, - journal = {IFIP Advances in Information and Communication Technology}, - volume = {513}, - number = {i}, - pages = {289--297}, - issn = {18684238}, - doi = {10.1007/978-3-319-66923-6_34}, - abstract = {The recent advances in digital technologies and in additive manufacturing (AM) in particular are revolutionising our industrial landscape. These changes require new engineering and management skills to exploit fully and sustainably the benefits offered by these advanced technologies. The current talent shortage calls for new education programmes to deliver a skilled, capable and adaptable workforce. Existing courses on design, engineering and management related to production and manufacturing do not systematically deliver the necessary skills and knowledge for an effective deployment of AM technologies. Based on a literature review and evidence collected from multi-stakeholder workshops, this paper presents the key themes for education programmes to address the current skill gap and barriers to AM adoption and exploitation.}, - isbn = {9783319669229}, - keywords = {3D printing,Additive manufacturing,Education,Skills}, - file = {/Users/fabio/Zotero/storage/NXZ227CI/Despeisse, Minshall - Skills and Education for AM - revised.pdf} -} - -@article{detandtRecyclerPerspectiveImplications2021, - title = {A Recycler's Perspective on the Implications of {{REACH}} and Food Contact Material ({{FCM}}) Regulations for the Mechanical Recycling of {{FCM}} Plastics}, - author = {De Tandt, Ellen and Demuytere, Cody and Van Asbroeck, Elke and Moerman, Hiram and Mys, Nicolas and Vyncke, Gianni and Delva, Laurens and Vermeulen, An and Ragaert, Peter and De Meester, Steven and Ragaert, Kim}, - year = {2021}, - month = jan, - journal = {Waste Management}, - volume = {119}, - pages = {315--329}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2020.10.012}, - urldate = {2023-09-05}, - abstract = {This manuscript provides an overview of the legislative requirements for the use of mechanical recycled plastics in articles placed on the EU market, as seen from the perspective of a plastics recycler. The first part reviews the main principles included in the overarching legislation on Registration, Evaluation, Authorisation and Restrictions of Chemicals (REACH) and to what extent these are applicable for mechanical recyclers of plastics. The interactions between REACH and the Waste Framework Directive (WFD) is discussed, as well as the difficulties for recyclers to comply with certain REACH requirements. In a second part, the focus is moved to the use of recycled plastics as Food Contact Material (FCM). The scope of the different applicable EU FCM regulations is inventorised as well as the key legislative principles involved. A final section is dedicated to the discussion on the authorisation of recycling processes under the FCM regulation and the practical challenges involved for the effective introduction of FCMs containing recycled plastics. Altogether it could be concluded that the complexity of the different legal perspectives, a lack of communication and transparency within the plastic value chain together with technical challenges related to recycling processes have been hindering the effective uptake of recycled plastic FCM (with the exception for bottle PET). The development of targeted solutions across the entire value-chain, taking into account different perspectives in terms of legislation and health protection, economic growth and technical innovations, will be crucial in achieving a circular economy for plastics, including recycled plastics for FCM.}, - keywords = {EU Legislation,Food Contact Materials,Mechanical recycling,Plastics,REACH}, - file = {/Users/fabio/Zotero/storage/2DK45FCB/De Tandt et al_2021_A recycler’s perspective on the implications of REACH and food contact material.pdf;/Users/fabio/Zotero/storage/3GEQKLYM/S0956053X2030581X.html} -} - -@article{DEusanio2019, - title = {Social Sustainability and Supply Chain Management: {{Methods}} and Tools}, - author = {D'Eusanio, Manuela and Zamagni, Alessandra and Petti, Luigia}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {178--189}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.323} -} - -@article{deutschLeadingInterTransdisciplinary2021, - title = {Leading Inter- and Transdisciplinary Research: {{Lessons}} from Applying Theories of Change to a Strategic Research Program}, - author = {Deutsch, Lisa and Belcher, Brian and Claus, Rachel and Hoffmann, Sabine}, - year = {2021}, - month = jun, - journal = {Environmental Science \& Policy}, - volume = {120}, - pages = {29--41}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.02.009}, - urldate = {2021-03-08}, - file = {/Users/fabio/Zotero/storage/VGIBBRIN/full-text.pdf} -} - -@article{Dev2020, - title = {Industry 4.0 and Circular Economy: {{Operational}} Excellence for Sustainable Reverse Supply Chain Performance}, - author = {Dev, Navin K. and Shankar, Ravi and Qaiser, Fahham Hasan}, - year = {2020}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {153}, - pages = {104583}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104583} -} - -@article{DeVargasMores2018, - ids = {DeVargasMores2018a}, - title = {Sustainability and Innovation in the {{Brazilian}} Supply Chain of Green Plastic}, - author = {{de Vargas Mores}, Giana and Finocchio, Caroline Pauletto Spanhol and Barichello, Rodrigo and Pedrozo, Eugenio Avila}, - year = {2018}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {177}, - pages = {12--18}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.12.138} -} - -@article{DevelopingConcretePolymer, - title = {Developing {{Concrete Polymer Building Components}} for {{3D Printing Ronald Rael}}, {{University}} of {{California Berkeley}}, {{Rael San Fratello Architects Virginia San Fratello}}, {{San Jose State University}}, {{Rael San Fratello Architects}}}, - file = {/Users/fabio/Zotero/storage/ZUMA49D8/Unknown - Unknown - Developing Concrete Polymer Building Components for 3D Printing Ronald Rael, University of California Berkeley, Rael.pdf} -} - -@book{Devisch2018, - title = {Participatory Design Theory}, - editor = {Devisch, Oswald and Huybrechts, Liesbeth and De Ridder, Roel}, - year = {2018}, - month = oct, - publisher = {{Routledge}}, - address = {{New York : Routledge, 2019. | Series: Routledge research in planning and urban design}}, - doi = {10.4324/9781315110332}, - isbn = {978-1-315-11033-2} -} - -@article{DeVries2015a, - title = {User-Led Innovation in Civic Energy Communities}, - author = {{de Vries}, Gerben W and Boon, Wouter P C and Peine, Alexander}, - year = {2015}, - journal = {Environmental Innovation and Societal Transitions}, - pages = {1--15}, - publisher = {{Elsevier B.V.}}, - issn = {22104224}, - doi = {10.1016/j.eist.2015.09.001}, - abstract = {Building on user and grassroots innovation literature, we explore user innovations in five Dutch civic energy communities. Less attention has been paid to the interplay of social, symbolic and technological innovations that seems to be at the heart of many civic energy communities. In this paper, we shed light on this interplay, and explore the activities of civic energy communities as configurational user innovations, i.e. creating user-designed arrangements of loosely related sets of components. Our analysis shows that configurational work combines off-the-shelf technologies with novel technical and non-technical ideas, such as business models for local energy provision, rather than endeavor clear-cut changes to existing devices. Such configurational work is deeply entangled with learning processes at the community level, whereby an evolving technical identity as well as various community building activities provide a growing network of resources as necessary context for implementation of user innovations.}, - keywords = {Civic energy communities,Configurations,User communities,User innovation,User-led technological change} -} - -@article{deyUseIndustrialWaste2022, - title = {Use of Industrial Waste Materials for {{3D}} Printing of Sustainable Concrete: {{A}} Review}, - author = {Dey, Dhrutiman and Srinivas, Dodda and Panda, Biranchi and Suraneni, Prannoy and Sitharam, T.G.}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {340}, - pages = {130749}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130749}, - urldate = {2022-02-09} -} - -@article{Dhanshyam2021, - title = {Effective Policy Mix for Plastic Waste Mitigation in {{India}} Using {{System Dynamics}}}, - author = {Dhanshyam, M. and Srivastava, Samir K.}, - year = {2021}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {168}, - pages = {105455}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105455}, - urldate = {2021-02-14}, - abstract = {Mitigation of plastic waste is a serious concern for policymakers. The present waste management system in India is grossly ineffective, with a significant proportion of mismanaged plastic waste. This paper identifies the effective policy mix to mitigate the plastic waste problem in India using system dynamics modelling. It simulates four major policy interventions - charging disposal fee, provision of recycling subsidies, provision of kerbside recycling facilities and a new intervention - imposing a plastic ban - and studies their relative impacts on the accumulated plastic waste stock under different implementation scenarios and combinations. The findings suggest that while composite combinations of policies offer more effective policy mix than individual policy interventions, a suitable choice of policy mix along with its timing and extent is crucial. Phased implementation of policies has a better impact than the constant rollout of equivalent magnitude. A phased composite mix of the provision of kerbside recycling facilities with either charging disposal fee or provision of recycling subsidies is the most effective policy mix, followed by the phased mix of charging disposal fee and provision of recycling subsidy. The plastic ban has a detrimental impact in the absence of proper enforcement mechanisms and substitutes. The paper presents a reliable roadmap to policymakers for the rollout of the effective policy mix. It contributes to theory-building by providing few novel insights about different policy mix and suggests new research directions.}, - keywords = {plastic ban,Plastic waste,Policy mix,System dynamics Modeling,Waste management} -} - -@article{dhirBehavioralReasoningTheory2020, - title = {Behavioral {{Reasoning Theory}} ({{BRT}}) {{Perspectives}} on {{E-waste Recycling}} and {{Management}}}, - author = {Dhir, Amandeep and Koshta, Nitin and Goyal, Raman Kumar and Sakashita, Mototaka and Almotairi, Mohammad}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124269}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124269}, - urldate = {2020-10-05}, - abstract = {Each year, millions of tons of electronic waste (or e-waste) are generated worldwide, thus, fueling concerns among scholars, practitioners, policymakers, and governments about e-waste recycling and management. The past few years have witnessed a growing interest among scholars to examine the behavioural issues concerning e-waste recycling. However, most of the existing studies have focused on adopting e-waste recycling and related innovations. It is already known that `reasons for' and `reasons against' the adoption of any innovation are quantitatively different. The current study bridges this gap by utilizing a novel consumer behavior framework called behavioral reasoning theory (BRT) to study e-waste recycling attitudes and intentions. The study examined the relative influence of `reasons for' and `reasons against' in predicting attitude and intentions within the context of e-waste recycling by using a single framework. The developed model was tested using structural equation modeling with 774 Japanese consumers. The study also examined the moderating role of environmental assessment and environmental concerns in influencing the studied associations. The results suggest that `reasons for' was positively associated with attitude and intentions. The consumer values shared negative associations only with `reasons against.' The study findings offer interesting insights for service providers, policymakers, and governments.}, - file = {/Users/fabio/Zotero/storage/GQ2FE4YA/full-text.pdf} -} - -@article{dhirDifferentStrokesDifferent2023, - title = {Different Strokes for Different Folks: {{Comparative}} Analysis of {{3D}} Printing in Large, Medium and Small Firms}, - shorttitle = {Different Strokes for Different Folks}, - author = {Dhir, Amandeep and Talwar, Shalini and Islam, Nazrul and Alghafes, Rasha and Badghish, Saeed}, - year = {2023}, - month = jul, - journal = {Technovation}, - volume = {125}, - pages = {102792}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2023.102792}, - urldate = {2023-07-06}, - abstract = {Industry 4.0 technologies such as 3D printing have radically transformed innovative outcomes for firms in terms of product design and offerings in the recent past. Acknowledging the impact, existing scholarship has delved into different dimensions of this technology and outcomes of its adoption, yet when compared with the scale of industrial activity globally and the varied possibilities associated with the adoption of this relatively new technology, the literature is woefully lean. Discussions and conversations on facilitators and inhibitors of adoption and continued usage are still nascent, particularly when one ponders upon specific insights related to sectors and firm size. The present study seeks to address this paucity by using the lens of firm size. Specifically, the study examines how firm size impacts various positive and negative outcomes of industry 4.0 innovation adoption and usage using 3D printing as an exemplar. Toward this end, we conducted a qualitative study to collect responses from 46 managers, 23 each from large-size and small-size enterprises operating in the United Kingdom. Thematic coding of responses revealed five aggregate dimensions representing facilitators and four aggregate dimensions representing inhibitors. Analysis of the findings revealed differences in outcomes with firm size, indicating that the adoption and optimal use of innovations such as 3D printing were indeed incumbent on firm size in the case of disruptive, technology-driven innovations that are generically presumed to have positive outcomes. Overall, the findings of this study provide new insights into various facilitators and inhibitors of the adoption of 3D printing technology, which can help firms to make better strategic decisions on the effective usage of this technology.}, - langid = {english}, - keywords = {3D printing,Disruptive technologies,Facilitators,Gioia method,Inhibitors}, - file = {/Users/fabio/Zotero/storage/2FBK6G3T/Dhir et al. - 2023 - Different strokes for different folks Comparative.pdf;/Users/fabio/Zotero/storage/FIFI3RGN/S0166497223001037.html} -} - -@article{Dias2018, - title = {Comparison of Tools for Quantifying the Environmental Performance of an Urban Territory}, - author = {Dias, Ana and Lemos, Diogo and Gabarrell, Xavier and Arroja, Luis}, - year = {2018}, - month = aug, - journal = {Journal of Industrial Ecology}, - volume = {22}, - number = {4}, - pages = {868--880}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {15309290}, - doi = {10.1111/jiec.12614}, - urldate = {2022-02-17}, - abstract = {To support effective urban policies aimed at decreasing the environmental impacts of cities, it is important to develop robust tools for accounting those impacts. Environmentally extended input-output analysis (EEIOA) is among the most used tools for this purpose, allowing the quantification of both direct and indirect impacts. Life cycle assessment (LCA) is also a holistic and comprehensive tool that accounts for direct and indirect impacts\textemdash but its application to cities is still very recent. This study aims at applying EEIOA and LCA to the municipality of Aveiro (Portugal) in order to compare the outcomes of the two tools in terms of total impacts (climate change and fossil fuel depletion) and hotspots (sectors/products contributing most to the impacts), to identify limitations and advantages of the tools when applied to Aveiro, and to illustrate how LCA can be applied to cities. The total impacts estimated with LCA and EEIOA were similar and the hotspots were also the same: transports, food, construction, and electricity. However, the relative contribution of some sectors was very different in the two tools due to methodological differences mainly in system boundaries, type of activities or products considered in each sector, and geographical coverage of impact data. This study concludes that the analyzed tools can provide complementary results to support decision making concerning urban planning and management.}, - keywords = {Energy consumption environmentally extended input-,Greenhouse gas emissions,Industrial ecology,Life cycle assessment (LCA),Material flow analysis (MFA)}, - file = {/Users/fabio/Zotero/storage/DVJ7F4PR/Comparison of Tools for Quantifying the Environmental Performance of an Urban.pdf} -} - -@article{Dias2019, - title = {Mind the Gap: {{The}} Potential Transformative Capacity of {{Social Innovation}}}, - author = {Dias, Joana and Partid{\'a}rio, Maria}, - year = {2019}, - journal = {Sustainability (Switzerland)}, - volume = {11}, - number = {16}, - pages = {1--17}, - issn = {20711050}, - doi = {10.3390/su11164465}, - abstract = {This paper aims to contribute to the understanding of the potential of Social Innovation (SI) for social transformation. Being a popular concept, SI has been discussed for decades, increasingly recognized for its complexity.Asystematic review of the literature on SI was undertaken to understand the state-of-the-art, the evolution of the concept and its core underpinnings in order to meet the research aim of this paper. The literature is relatively broad in relation to general characteristics of SI and contexts where it is happening, but the use of the 'social innovation' term often reveals semantic problems, generating multiple, interchangeable and mixed understandings. In this paper, we identify and discuss two ways of using SI in the literature: (i) one that favours the materialization of SI, as something tangible that can be observed, measured and systematically analysed; we called this a cartesian approach; and (ii) another that uses systemic thinking focussing on successful factors of SI to enhance its transformative capacity in existing system(s) through change in routines, resources, and beliefs; we called this a disruptive approach. While still emerging in SI literature the academic discussion about SI dynamics and its transformative capacity is increasingly addressed by scholars. We conclude the paper by arguing that more transformative-driven and systemic SI may enhance its potential to lead change, while it only creates transformation when it scales-up or out, and when it has durability and transformative impact.}, - keywords = {Social innovation,Transformation,Transformative capacity}, - file = {/Users/fabio/Zotero/storage/DKI5FCHR/Mind the gap The potential transformative capacity of Social Innovation.pdf} -} - -@article{diazImplementingCircularEconomy2022, - title = {Implementing Circular Economy Strategies during Product Development}, - author = {Diaz, Anna and Reyes, Tatiana and Baumgartner, Rupert J.}, - year = {2022}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {184}, - pages = {106344}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106344}, - urldate = {2022-05-30} -} - -@article{diazSustainableProductDevelopment2021, - ids = {Diaz2021}, - title = {Sustainable Product Development in a Circular Economy: Implications for Products, Actors, Decision-Making Support and Lifecycle Information Management}, - author = {Diaz, Anna and Sch{\"o}ggl, Josef-Peter and Reyes, Tatiana and Baumgartner, Rupert J.}, - year = {2021}, - month = jan, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.12.044}, - urldate = {2021-01-05}, - file = {/Users/fabio/Zotero/storage/BB98ZL9I/full-text.pdf} -} - -@article{diberardoGlobalDiscussionOur2022, - title = {A Global Discussion about Our Possible Futures during the 2021 {{World Future Day}}}, - author = {Di Berardo, Mara}, - year = {2022}, - month = jan, - journal = {Futures}, - pages = {102905}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2022.102905}, - urldate = {2022-01-27} -} - -@article{Dick2018, - title = {Stakeholders' Perspectives on the Operationalisation of the Ecosystem Service Concept: {{Results}} from 27 Case Studies}, - author = {Dick, Jan and Turkelboom, Francis and Woods, Helen and {Iniesta-Arandia}, Irene and Primmer, Eeva and Saarela, Sanna Riikka and Bez{\'a}k, Peter and Mederly, Peter and Leone, Michael and Verheyden, Wim and Kelemen, Eszter and Hauck, Jennifer and Andrews, Chris and Antunes, Paula and Aszal{\'o}s, R{\'e}ka and Bar{\'o}, Francesc and Barton, David N. and Berry, Pam and Bugter, Rob and Carvalho, Laurence and Cz{\'u}cz, B{\'a}lint and Dunford, Rob and Garcia Blanco, Gemma and Geam{\u a}n{\u a}, Nicoleta and Giuc{\u a}, Relu and Grizzetti, Bruna and Izakovi{\v c}ov{\'a}, Zita and Kert{\'e}sz, Mikl{\'o}s and Kopperoinen, Leena and Langemeyer, Johannes and Montenegro Lapola, David and Liquete, Camino and Luque, Sandra and Mart{\'i}nez Pastur, Guillermo and {Martin-Lopez}, Berta and Mukhopadhyay, Raktima and Niemela, Jari and Odee, David and Peri, Pablo Luis and Pinho, Patricia and {Patr{\'i}cio-Roberto}, Gleiciani B{\"u}rger and Preda, Elena and Priess, Joerg and R{\"o}ckmann, Christine and Santos, Rui and Silaghi, Diana and Smith, Ron and V{\u a}dineanu, Anghelu{\c t}{\u a} and {van der Wal}, Jan Tjalling and Arany, Ildik{\'o} and Badea, Ovidiu and Bela, Gy{\"o}rgyi and Boros, Emil and Bucur, Magdalena and Blumentrath, Stefan and Calvache, Marta and Carmen, Esther and Clemente, Pedro and Fernandes, Jo{\~a}o and Ferraz, Diogo and Fongar, Claudia and {Garc{\'i}a-Llorente}, Marina and {G{\'o}mez-Baggethun}, Erik and Gundersen, Vegard and Haavardsholm, Oscar and Kal{\'o}czkai, {\'A}gnes and Khalalwe, Thalma and Kiss, Gabriella and K{\"o}hler, Berit and Laz{\'a}nyi, Orsolya and {Lellei-Kov{\'a}cs}, Eszter and Lichungu, Rael and Lindhjem, Henrik and Magare, Charles and Mustajoki, Jyri and Ndege, Charles and Nowell, Megan and Nuss Girona, Sergi and Ochieng, John and Often, Anders and Palomo, Ignacio and Pataki, Gy{\"o}rgy and Reinvang, Rasmus and Rusch, Graciela and Saarikoski, Heli and Smith, Alison and Soy Massoni, Emma and Stange, Erik and V{\aa}gnes Traaholt, Nora and V{\'a}ri, {\'A}gnes and Verweij, Peter and Vikstr{\"o}m, Suvi and {Yli-Pelkonen}, Vesa and Zulian, Grazia}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {552--565}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.09.015}, - abstract = {The ecosystem service (ES) concept is becoming mainstream in policy and planning, but operational influence on practice is seldom reported. Here, we report the practitioners' perspectives on the practical implementation of the ES concept in 27 case studies. A standardised anonymous survey (n = 246), was used, focusing on the science-practice interaction process, perceived impact and expected use of the case study assessments. Operationalisation of the concept was shown to achieve a gradual change in practices: 13\% of the case studies reported a change in action (e.g. management or policy change), and a further 40\% anticipated that a change would result from the work. To a large extent the impact was attributed to a well conducted science-practice interaction process ({$>$}70\%). The main reported advantages of the concept included: increased concept awareness and communication; enhanced participation and collaboration; production of comprehensive science-based knowledge; and production of spatially referenced knowledge for input to planning (91\% indicated they had acquired new knowledge). The limitations were mostly case-specific and centred on methodology, data, and challenges with result implementation. The survey highlighted the crucial role of communication, participation and collaboration across different stakeholders, to implement the ES concept and enhance the democratisation of nature and landscape planning.}, - keywords = {Ecosystem services operationalisation,Evaluation,Place-based implementation,Stakeholder perceptions}, - file = {/Users/fabio/Zotero/storage/BNIGLSHM/Stakeholders--perspectives-on-the-operationalisation-of-the-e_2018_Ecosystem.pdf} -} - -@article{diClosedloopMaterialFlow2022, - title = {Towards Closed-Loop Material Flow in Additive Manufacturing: {{Recyclability}} Analysis of Thermoplastic Waste}, - shorttitle = {Towards Closed-Loop Material Flow in Additive Manufacturing}, - author = {Di, Lei and Yang, Yiran}, - year = {2022}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {362}, - pages = {132427}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.132427}, - urldate = {2022-09-26}, - abstract = {Thermoplastic is one of the most popular materials used in additive manufacturing (AM). As the adoption of AM technologies has been rapidly increasing, the feasibility of recycling AM waste and the quality of recycled materials need to be investigated to facilitate closed-loop material flow and cleaner production. In current literature, studies have been performed to compare material property changes before and after recycling, and a certain level of mechanical degradation has been observed. Some material properties such as molecular weight distribution have not yet been investigated in AM recycling. In addition, the recyclability of waste materials under multiple rounds of recycling has not yet been well studied. These knowledge gaps indicate a research need for AM material recyclability evaluation and improvement. In this research, an assessment framework is proposed and implemented to evaluate the recyclability of acrylonitrile butadiene styrene in extrusion-based AM, providing guidelines for quantifying variations of molecular weight distribution, material density, fabrication quality, and mechanical properties under multiple rounds of recycling. Different process parameters and their impact on material recyclability in each round are also studied. Experimental results indicate that the ultimate tensile strength degradation after each recycling round varies from 27\% to over 50\%; surface roughness increases 29.54\% after three rounds of recycling; molecular weight distribution of recycled materials demonstrates obvious shifts, and the polydispersity is decreased by 13.16\% after three rounds of recycling. The results of this research will help AM users better understand and implement waste recycling, which will positively impact the AM community by contributing towards achieving cleaner production and enhancing the material efficiency and environmental sustainability of AM.}, - langid = {english}, - keywords = {Additive manufacturing,Cleaner production,Closed-loop material flow,Recyclability,Waste recycling}, - file = {/Users/fabio/Zotero/storage/3SDFYUAP/Di_Yang_2022_Towards closed-loop material flow in additive manufacturing.pdf;/Users/fabio/Zotero/storage/ELKVZ852/S0959652622020285.html} -} - -@incollection{Diegel2016, - title = {Additive {{Manufacturing}} and Its {{Effect}} on {{Sustainable Design}}}, - author = {Diegel, O. and Kristav, P. and Motte, D. and Kianian, B.}, - year = {2016}, - volume = {1}, - pages = {73--99}, - issn = {2315-7651}, - doi = {10.1007/978-981-10-0549-7_5}, - isbn = {978-981-10-0547-3}, - file = {/Users/fabio/Zotero/storage/CI3M8L47/Subramanian Senthilkannan Muthu - 2016 - Handbook of Sustainability in Additive Manufacturing.pdf} -} - -@article{diegelDesignAdditiveManufacturing2020, - title = {Design for Additive Manufacturing Process for a Lightweight Hydraulic Manifold}, - author = {Diegel, Olaf and Schutte, Juan and Ferreira, Arno and Chan, Yuk Lun}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - volume = {36}, - number = {June}, - pages = {101446}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2020.101446}, - urldate = {2020-07-14}, - keywords = {Design for Additive Manufacturing,DFAM,Lightweighting,Manifold,Metal powder bed fusion} -} - -@inproceedings{Diehl2019, - title = {Do-It-{{Yourself}} ({{DIY}}) {{Workspaces Run}} by {{Local Entrepreneurs}} That {{Transform Plastic Waste Into Valuable Water}} and {{Sanitation Products}}}, - booktitle = {2018 {{IEEE Global Humanitarian Technology Conference}} ({{GHTC}})}, - author = {Diehl, Jan-Carel and Stroober, Mathijs and Majumdar, Prarthana and Mink, Annemarie}, - year = {2018}, - month = oct, - number = {October}, - pages = {1--8}, - publisher = {{IEEE}}, - doi = {10.1109/GHTC.2018.8601880}, - abstract = {In informal urban settlements, there is an abundance of plastic waste material, which creates a range of health and environment-related problems. At the same time, there is a lack of locally produced products to improve the conditions for basic needs such as water and hygiene. As a means to connect these two challenges, we propose a distinctive solution in this paper: Do-it-Yourself (DIY) workspaces run by local entrepreneurs that transform plastic waste into valuable water and sanitation products. Our focus area during this project was the Korail slum in Dhaka. With the support of the Capability Driven Design (CDD) method, that AIDS design teams to systematically and comprehensively explore user contexts, we conducted an intensive field study in Korail. These insights helped us to identify fifteen product ideas, which were assessed on a range of criteria for viability. One of the worked-out solutions is a lid with vibrant colors made of recycled plastics to cover the aluminum pots used for storing water. Consequently, a lid and corresponding mould for local use with the plastic recycling machines of Precious Plastics were developed. The team also developed a business plan that is embedded in the network structure of the community and can be adopted by local entrepreneurs. The uniqueness of our approach lies in valorizing the use of local waste materials for products related to basic needs by stimulating DIY and grassroots level entrepreneurship.}, - isbn = {978-1-5386-5566-5}, - keywords = {Bangladesh,DIY,Entrepreneurship,Informal Settlements,Plastic Waste,water Hygiene}, - file = {/Users/fabio/Zotero/storage/EVE8SP3J/Do-it-Yourself (DIY) Workspaces Run by Local Entrepreneurs that Transform Plastic Waste into Valuable Water and Sanitation Products.pdf} -} - -@article{Dietz2006, - title = {Weak and Strong Sustainability in the {{SEEA}}: {{Concepts}} and Measurement}, - author = {Dietz, Simon and Neumayer, Eric}, - year = {2007}, - journal = {Ecological Economics}, - volume = {61}, - number = {4}, - pages = {617--626}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2006.09.007}, - urldate = {2022-04-03}, - abstract = {In this paper, we explain how the latest international handbook on environmental accounting, the System of Integrated Environmental and Economic Accounting or SEEA (United Nations, European Commission, International Monetary Fund, Organisation for Economic Co-operation and Development and World Bank (2003). Handbook of National Accounting, Studies in Methods. New York, United Nations.), can be used to measure weak and strong sustainability. We emphasise the importance of understanding the conceptual differences between weak and strong sustainability. We then outline what we consider to be current best practice in measurement, all the time flagging the relationship between our discussion and that of the SEEA-2003. This is an important task in our view, because, despite covering a very wide range of relevant conceptual and empirical issues, the handbook is by design not meant to provide clear guidelines for the purpose of measuring sustainability in either its weak or strong version. \textcopyright{} 2006 Elsevier B.V. All rights reserved.}, - keywords = {Ecological footprint,Environmental accounting,Genuine savings,Index of sustainable welfare,Material flow accounts,Weak and strong sustainability}, - file = {/Users/fabio/Zotero/storage/PXV9P7EF/full-text.pdf} -} - -@article{dietzClimateChangeSociety2020, - title = {Climate {{Change}} and {{Society}}}, - author = {Dietz, Thomas and Shwom, Rachael L. and Whitley, Cameron T.}, - year = {2020}, - month = jul, - journal = {Annual Review of Sociology}, - volume = {46}, - number = {1}, - publisher = {{Annual Reviews}}, - issn = {0360-0572}, - doi = {10.1146/annurev-soc-121919-054614}, - urldate = {2020-08-09}, - abstract = {Climate change is one of the greatest ecological and social challenges of the twenty-first century. Sociologists have made important contributions to our knowledge of the human drivers of contemporary climate change, including better understanding of the effects of social structure and political economy on national greenhouse gas emissions, the interplay of power and politics in the corporate sector and in policy systems, and the factors that influence individual actions by citizens and consumers. Sociology is also poised to make important contributions to the study of climate justice across multiple lines of stratification, including race, class, gender, indigenous identity, sexuality and queerness, and disability, and to articulate the effects of climate change on our relationship to nonhuman species. To realize its potential to contribute to the societal discourse on climate change, sociology must become theoretically integrated, engage with other disciplines, and remain concerned with issues related to environmental and climate inequalities.Expected final online publication date for the Annual Review of Sociology, Volume 46 is July 30, 2020. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.}, - keywords = {climate change,climate justice,environmental sociology,global environmental change,human ecology} -} - -@article{Diez2012, - title = {Personal {{Fabrication}}: {{Fab Labs}} as {{Platforms}} for {{Citizen-Based Innovation}}, from {{Microcontrollers}} to {{Cities}}}, - author = {Diez, Tomas}, - year = {2012}, - journal = {Nexus Network Journal}, - volume = {14}, - number = {3}, - pages = {457--468}, - issn = {15905896}, - doi = {10.1007/s00004-012-0131-7}, - abstract = {The "digital fabrication" revolution being lived today, both in knowledge creation and in technological developments will become more than a simple formal exploration in architecture and design, or a set of tools exclusive to advanced industries. New tools and processes are becoming more accessible to the masses and are being shared all over the world through Internet platforms, with an open source philosophy, both in software and hardware. The collective mind that is being empowered everyday will define the future of production in the life of mankind and its relation with the environment. The role of architects, engineers, designers and many other professionals, will be reshaped and reconfigured to fit into new models of production and creation. These will need to be supported by new manufacturing platforms, knowledge generating and sharing know-how.}, - isbn = {1590-5896}, - pmid = {1197181892}, - keywords = {3D printing,digital fabrication,fab lab Barcelona,Fab labs,innovation,new manufacturing tools,self production,smart cities,third industrial revolution,urban design,urbanism}, - file = {/Users/fabio/Zotero/storage/STSXVY9D/Personal Fabrication Fab Labs as Platforms for Citizen-Based Innovation, from Microcontrollers to Cities.pdf} -} - -@article{difeliceWhyShouldEU2021, - title = {Why Should the {{EU}} Implement Electric Vehicles? {{Viewing}} the Relationship between Evidence and Dominant Policy Solutions through the Lens of Complexity}, - author = {Di Felice, Louisa Jane and Renner, Ansel and Giampietro, Mario}, - year = {2021}, - month = sep, - journal = {Environmental Science \& Policy}, - volume = {123}, - pages = {1--10}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.05.002}, - urldate = {2021-05-10} -} - -@article{diggleImplementationHarmonizedExtended2020, - title = {Implementation of Harmonized {{Extended Producer Responsibility}} Strategies to Incentivize Recovery of Single-Use Plastic Packaging Waste in {{Canada}}}, - author = {Diggle, Avalon and Walker, Tony R.}, - year = {2020}, - month = jun, - journal = {Waste Management}, - volume = {110}, - pages = {20--23}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.05.013}, - urldate = {2020-05-27}, - abstract = {Millions of tonnes of virgin (primary) plastic are produced annually, while recoverable (secondary) plastic rapidly accumulates as waste in landfills and the environment. Single-use plastics (SUPs) have short lifespans, and most of this waste is generated by packaging from global food industries. Food packaging waste comprises approximately one-third (8 million tonnes) of all Canadian municipal solid waste, and only 20\% is recovered for reuse or recycling. Extended producer responsibility (EPR) strategies leverage corporate resources to reduce SUP waste generated by consumers. Implementation of EPR strategies allows local jurisdictions to gain greater control over their waste streams. Although Canada has had a national EPR strategy since 2009, it is currently only implemented for packaging in five provinces (e.g., British Columbia, Saskatchewan, Manitoba, Ontario and Qu\'ebec), and is currently under development in New Brunswick. In this short communication, a case example of EPR implementation in Nova Scotia is provided which highlights the potential economic benefits for municipalities (\$14\textendash 17 M CAD in estimated savings), for improved solid waste management and for increasing recycling rates. Further, a regional EPR strategy is recommended for all Atlantic Canadian provinces (e.g., Newfoundland and Labrador, New Brunswick, Prince Edward Island and Nova Scotia) now that the Canadian federal government has announced a move towards zero plastic waste under the Ocean Plastics Charter.}, - keywords = {Canada,Extended producer responsibility (EPR),Food packaging,Recycling and reuse,Single-use plastics (SUPs),Zero plastic waste} -} - -@article{Dijkema2006, - title = {Trends and Opportunities Framing Innovation for Sustainability in the Learning Society}, - author = {Dijkema, G. P.J. and Ferr{\~a}o, P. and Herder, P. M. and Heitor, M.}, - year = {2006}, - journal = {Technological Forecasting and Social Change}, - volume = {73}, - number = {3}, - pages = {215--227}, - issn = {00401625}, - doi = {10.1016/j.techfore.2006.01.001}, - abstract = {Innovation, a broad social and economic activity within emerging societies, transcends any specific technology, even if revolutionary, and is tied to attitudes and behaviours oriented towards the exploitation of change by adding value. In this context, we analyse on-going paths towards innovative societies taking into consideration their sustainable development. The solution-space for innovation for sustainability is characterised by three dimensions: 1) the entire lifespan of a product; 2) the entire socio-technic network of which a particular plant is part of, or from which a particular product emerges; and 3) stakeholders and decision processes, including business organisations and strategies; and public institutions, policy and regulatory frameworks. All theses three dimensions are shown to be critically related with the social appropriation of a broad knowledge base, which calls our special attention to the systems of innovation and competence building shaping our societies. Societies and their organisations differ in their approach to sustainability. Distinguishing between different types of stakeholders helps to elucidate barriers to change, and to exploit the solution-space for innovation. The contributions in this Special Issue illustrate various dimensions of the innovation-space and their related knowledge base. The examples addressed support the conclusion that the framework presented has general applicability to analyse and foster innovation for sustainability. \textcopyright{} 2006 Elsevier Inc. All rights reserved.}, - file = {/Users/fabio/Zotero/storage/6Y7YLG6W/Trends and opportunities framing innovation for sustainability in the learning society.pdf} -} - -@article{dijkstraRolesSustainableEntrepreneurs2023, - title = {The Roles of Sustainable Entrepreneurs in Tackling Societal Challenges: {{Quantifying}} How Sustainable Plastic Companies Act to Create System Change}, - shorttitle = {The Roles of Sustainable Entrepreneurs in Tackling Societal Challenges}, - author = {Dijkstra, Hanna and Planko, Julia}, - year = {2023}, - month = jun, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.05.028}, - urldate = {2023-06-13}, - abstract = {Sustainability-oriented entrepreneurs are important actors in addressing grand societal challenges, they introduce new products and services, but also conduct so-called system-changing activities, such as creating awareness, building shared infrastructure and lobbying for supportive legislation. This paper seeks to understand how entrepreneurs contribute to a sustainability transition through system-changing and business activities by conducting a survey with almost 100 company representatives working within the plastic sector. We conceptualize eight groups of system-changing activities and find companies spend most time on product, service and technology development. Conversely, businesses spent least time on influencing institutions and standardization, though many indicated they would prefer to allocate more time to collaborating with industry and government institutions. Our study empirically confirms that businesses do not only devote time and resources to business development, but also to system-changing actions. Especially respondents who perceive their company a necessary actor in the sustainability transition, were more likely to conduct system-changing activities. This led us to introduce the term `transition-oriented entrepreneur', who seeks to deliver environmental or social benefits, achieve business profit and proactively change the system in which they operate. We recommend key stakeholders in sustainability transitions to take on a systems perspective and to identify which system-changing activities need more time and resources in order to accelerate systemic change of their production and consumption system. Moreover, we recommend making entrepreneurs aware of their possible power and influence in changing the system, to increase their agency and accelerate system change.}, - langid = {english}, - keywords = {Plastic pollution,Sustainability transitions,Sustainability-oriented entrepreneur,System-changing}, - file = {/Users/fabio/Zotero/storage/KR6TUN6V/S2352550923001239.html} -} - -@article{Dikov2014, - title = {Feasibility of {{Hydrocyclones}} for {{Combined Cleaning}} of {{Circulation}} and {{Waste Water}}}, - author = {Dikov, V. A. and Sukhanov, D. E.}, - year = {2014}, - month = jan, - journal = {Chemical and Petroleum Engineering}, - volume = {49}, - number = {9-10}, - pages = {619--623}, - issn = {00092355}, - doi = {10.1007/s10556-014-9806-0}, - urldate = {2020-04-08}, - abstract = {Designs and technical characteristics of pressurized hydrocyclones formed from plastic and metal are examined in stand-alone and bank versions. Process-flow diagrams and operational indicators of an embedded hydrocyclone unit for the cleaning of circulation and waste waters are presented. The feasibility of hydrocyclones for removal of both suspended and liquid contaminants, for example, petroleum products, from circulation and waste waters is demonstrated. \textcopyright{} 2014 Springer Science+Business Media New York.} -} - -@article{DiMaria2018, - title = {Downcycling versus Recycling of Construction and Demolition Waste: {{Combining LCA}} and {{LCC}} to Support Sustainable Policy Making}, - author = {Di Maria, Andrea and Eyckmans, Johan and Van Acker, Karel}, - year = {2018}, - journal = {Waste Management}, - volume = {75}, - pages = {3--21}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2018.01.028}, - abstract = {Urgent solutions are needed in Europe to deal with construction and demolition waste (CDW). EU policy has contributed to significantly reducing the amount of CDW going to landfill, but most of the effort has been put in downcycling practices. Therefore, further policies are needed to stimulate high-quality recycling of CDW. The present paper presents a combined life cycle assessment (LCA) and life cycle costing (LCC) methodologies to analyse the environmental and the economic drivers in four alternative CDW end-of-life scenarios in the region of Flanders, in Belgium. The four analysed alternatives are (i) landfilling, (ii) downcycling, (iii) advanced recycling and (iv) recycling after selective demolition. LCA results show that landiflling is the scenario having the highest environmental impacts in terms of person equivalent (PE), followed by downcycling and recycling (-36\%) and recycling after selective demolition (-59\%). The decrease in environmental impacts is mostly due to the avoided landfilling of CDW and the recovery of materials from selective demolition. LCC results indicate that landfilling is the scenario bearing the highest total economic costs. This is due to the high landfill tax in Flanders. The recycling after selective demolition bears the second highest cost. The increase of high-quality CDW recycling can significantly reduce the overall environmental impact of the system. Implementing a high landfill tax, increasing the gate fee to the recycling plant, and boosting the sales price of recycled aggregates are the most effective drivers to facilitate a transition towards a more sustainable CDW management system. The paper demonstrates that the combined LCA and LCC results can highlight the environmental and economic drivers in CDW management. The results of the combined analysis can help policymakers to promote the aspects contributing to sustainability and to limit the ones creating a barrier.}, - keywords = {Construction and demolition waste,LCA,LCC,Waste policy support}, - file = {/Users/fabio/Zotero/storage/SX2EVJS8/Downcycling versus recycling of construction and demolition waste- Combining LCA and LCC to support sustainable policy making.pdf} -} - -@article{Dimitrov2006, - ids = {dimitrov2006}, - title = {Advances in Three Dimensional Printing - State of the Art and Future Perspectives}, - author = {Dimitrov, D. and Schreve, K. and Beer, N. De}, - year = {2006}, - journal = {Rapid Prototyping Journal}, - volume = {12}, - number = {3}, - pages = {136--147}, - publisher = {{Emerald Group Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/13552540610670717}, - abstract = {This paper surveys the current state and capabilities of Three Dimensional Printing (3DP). Based on its technical background \textendash{} the ink jet printing as known from the printer and plotter industry \textendash{} a classification structure has been developed and proposed. Different printing techniques and process concepts, together with their advantages and limitations are described and analysed. A large variety of manufacturing applications such as rapid pattern making and rapid tooling using the 3DP process directly or as core technology, as well as further implications in design and engineering analysis, medicine, and architecture are presented and evaluated. Some research issues are also discussed. An attempt, based on the state of the art, to show weaknesses and opportunities, and to draw conclusions about the future of this}, - isbn = {13552546 (ISSN)}, - pmid = {214028793}, - keywords = {modelling,Modelling,paper type research paper,print media,Print media,rapid prototypes,Rapid prototypes}, - file = {/Users/fabio/Zotero/storage/2K5AJGLW/Dimitrov, Schreve, Beer - 2006 - Advances in three dimensional printing - state of the art and future perspectives.pdf} -} - -@misc{Dinca-Panaitescu2020, - title = {Dancing between "Zoom in" and "Zoom out" Perspectives to Evaluate Social Innovation Labs}, - author = {{Dinca-Panaitescu}, Mihaela}, - year = {2020}, - month = nov, - journal = {Can. J. Progr. Eval.}, - volume = {35}, - number = {2}, - pages = {222--229}, - publisher = {{Canadian Journal of Program Evaluation}}, - issn = {08341516}, - doi = {10.3138/CJPE.68497}, - abstract = {Social Innovation (SI) Labs are increasingly gaining attention as a specifi c class of social innovation promising to effect systems change. Evaluation of SI Labs is in its infancy, and so there is a limited track record of systematic evidence and learning to support the practice of SI Labs. This practice note shares insights and learning from the process of evaluating a certain model of SI Labs grounded in the "zoom in-zoom out" approach. This represents a hybrid approach that combines elements of developmental evaluation with elements of other evaluation approaches to enable the interplay between two complementary perspectives: A more in-depth look into each phase of the Lab ("zoom in") and a broader look at the Lab in its entirety ("zoom out"), and its contribution to a more established place-based strategy.}, - keywords = {Developmental evaluation,Emergent interventions,Learning and evaluation framework,Social innovation,Social innovation labs} -} - -@article{Ding2019, - title = {Review of Mechanisms and Deformation Behaviors in {{4D}} Printing}, - author = {Ding, Han and Zhang, Xiang and Liu, Yong and Ramakrishna, Seeram}, - year = {2019}, - month = may, - journal = {The International Journal of Advanced Manufacturing Technology}, - issn = {0268-3768}, - doi = {10.1007/s00170-019-03871-3} -} - -@article{dingEconomicsAdditiveManufacturing2021, - title = {The Economics of Additive Manufacturing: {{Towards}} a General Cost Model Including Process Failure}, - author = {Ding, Jin and Baumers, Martin and Clark, Elizabeth A. and Wildman, Ricky D.}, - year = {2021}, - month = feb, - journal = {International Journal of Production Economics}, - volume = {237}, - pages = {108087}, - publisher = {{Elsevier}}, - issn = {09255273}, - doi = {10.1016/j.ijpe.2021.108087}, - urldate = {2021-03-08}, - abstract = {The interest in Additive Manufacturing (AM) technology, also known as 3D printing, is unbroken. In many industries, however, stakeholders are struggling to understand AM's potential for manufacturing value creation. Most available literature on the cost of AM stresses the importance of ancillary processes and treats the relationship between process efficiency and capacity utilization. The most recently added - and overdue - aspect included in the extant AM costing literature considers the expected impact of so-called ill-structured costs, mainly relating to process failure and product rejection. Available research has investigated this aspect across a variety of technology types and process elements. This paper develops a new AM cost model that is generally specified so it can represent the probability and expected cost effect of failure events for all existing AM technologies. To demonstrate the implementation of this model, this paper applies it to the manufacture of pharmaceutical products (tablets) using the AM technology variant material jetting. The paper thus provides a robust indication of achievable unit cost levels, the cost effect of process failure, and also broaches the usefulness of cost models in guiding further process improvements.}, - keywords = {Additive manufacturing,Cost,Material jetting,Process failure,Product rejection} -} - -@article{dingExploringDifferencesEcosystem2023, - title = {Exploring the Differences of Ecosystem Service Values in Different Functional Areas of Metropolitan Areas}, - author = {Ding, Tonghui and Chen, Junfei and Fang, Zhou and Wang, Yu}, - year = {2023}, - month = jun, - journal = {Sustainable Production and Consumption}, - volume = {38}, - pages = {341--355}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.04.016}, - urldate = {2023-05-11}, - abstract = {Exploring the differences of ecosystem service values (ESV) in different functional areas is the basis for implementing differentiated ecological management in metropolitan areas. In this study, a general evaluation framework was first established to explore the differences of ESV in different functional areas of metropolitan areas. Then, taking Nanjing metropolitan area as a typical case, the land use transfer matrix and equivalent factor method were used to evaluate land use changes and ESV in different functional areas (moderate development area, key development area and optimization improvement area). Finally, spatial autocorrelation analysis, hotspot analysis and one-way analysis of variance were adopted to explore the spatial agglomeration characteristics, distribution of hotspots and cold spots and significant differences of ESV in different functional areas. The results showed that the expansion of developed land and degradation of ecological land occurred in different functional areas, especially in the optimization improvement area, which resulted in a significant decrease of ESV in different functional areas. The ESV of the three functional areas showed spatial positive correlation, but the distribution of hotspots and cold spots was different in different functional areas. The one-way analysis of variance found that optimization improvement area displayed significant differences in the values of four ecosystem service types with those of other functional areas, but there were no significant differences between moderate development area and key development area. In addition, the ecological function area with clear boundary was identified, which was mainly composed of the northern water network area (Hongze, Jinhu, Gaoyou) and the southern hilly area (Ningguo, Jixi, Jingde and Guangde). Therefore, differential ecological management measures such as green space construction in the optimization improvement area and ecological compensation mechanism in the moderate development area were formulated to promote the sustainable development of metropolitan ecosystems. This study can also provide reference for exploring the differences of ESV in different functional areas of other metropolitan areas within and beyond China.}, - langid = {english}, - keywords = {Differentiated management,Ecosystem service value,Functional area,Land use change,Metropolitan area}, - file = {/Users/fabio/Zotero/storage/TSEVIW28/Ding et al. - 2023 - Exploring the differences of ecosystem service val.pdf;/Users/fabio/Zotero/storage/67SQ58CR/S235255092300088X.html} -} - -@article{dingParticleEmissionLevels2021, - title = {Particle Emission Levels in the User Operating Environment of Powder, Ink and Filament-Based {{3D}} Printers}, - author = {Ding, Shirun and Ng, Bing Feng}, - year = {2021}, - month = jun, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-02-2020-0039}, - urldate = {2021-06-16}, - keywords = {Directed energy deposition,Indoor air quality,Material extrusion,Material jetting,Particle emission,Powder bed fusion} -} - -@article{dingResearchInfluenceAnthropomorphic2020, - title = {Research on the Influence of Anthropomorphic Design on the Consumers' Express Packaging Recycling Willingness:The Moderating Effect of Psychological Ownership}, - author = {Ding, Zhihua and Sun, Jing and Wang, Yawei and Jiang, Xuehui and Liu, Rong and Sun, Wenbin and Mou, Yupeng and Wang, Dianwen and Liu, Manzhi}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {168}, - pages = {105269}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105269}, - urldate = {2021-03-08}, - abstract = {The change of consumers' shopping mode has caused massive express packaging waste, which results in resource waste and environmental pollution. Therefore, the recycling of express packaging has become an important environmental protection requirements as well as social issue and it requires an urgent solution. At the same time, the impact of anthropomorphism on consumer behavior is increasingly prominent. Built on the "A Three-Factor Theory of Anthropomorphism" and the "Theory of Perspective-Taking", this article established a psychological dynamic theoretical model about the effect of anthropomorphic design on consumers' recycling willingness. Through four experiments, variance analysis and regression analysis, it can be concluded that: (1) Anthropomorphic design has a significant positive impact on the consumers' express packaging recycling willingness, and empathy plays a mediating effect between them. (2) Compared with anthropomorphic language design, anthropomorphic shape design has a more significant impact on consumers' express packaging recycling willingness. (3) High psychological ownership has a significant positive moderating effect on the relationship between anthropomorphic design and empathy, i.e., the higher the consumer's psychological ownership, the stronger the mediating effect of empathy. Low psychological ownership has no significant moderating effect on the relationship between anthropomorphic design and empathy. Therefore, consumers' willingness to recycle express packaging can be promoted by improving their psychological ownership and the anthropomorphic design of express packaging.}, - keywords = {Anthropomorphic design,Consumers' express packaging recycling willingness,Empathy,Psychological ownership} -} - -@article{dingRevealingHiddenPotentials2023, - title = {Revealing the Hidden Potentials of {{Internet}} of {{Things}} ({{IoT}}) - {{An}} Integrated Approach Using Agent-Based Modelling and System Dynamics to Assess Sustainable Supply Chain Performance}, - author = {Ding, Suiting and Ward, Hauke and Cucurachi, Stefano and Tukker, Arnold}, - year = {2023}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {421}, - pages = {138558}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.138558}, - urldate = {2023-08-31}, - abstract = {The Internet of Things (IoT) brings new opportunities for creating intelligent and streamlined supply chains that have better environmental and cost performance as compared to conventional ones. In this paper, we quantify such improvements for a specific logistics chain case. To support the inventory of cost and emission data, we utilize system dynamics (SD) and agent-based modeling (AB) to define the structure of the two logistical systems, simulating and estimating differences in e.g., required storage levels, efficiency of transport, etc. In particular, we assess the difference in carbon emissions, cost, and market performance of a battery delivery chain in the delivery process between a two-tier IoT-supported supply chain (users are served by an IoT retailer directly connected to the producer) and a conventional three-tier supply chain (include an additional wholesaler to connect retailer and producer). The results demonstrate that IoT supply chains have significant advantages in minimizing average product storage and shipment fluctuations. IoT suppliers can estimate market demand to adjust production and transportation strategies for new orders. Consequently, the overall profitability of the IoT supply chain increases by more than 30\%. Heating and lighting emissions in the storage process and direct emissions in transportation per functional unit (one unit of a Li-ion cell module) are reduced by 60\%\textendash 70\% under middle- and low-demand scenarios, and by at least 50\% under high-demand scenario. However, the increasing use and higher loading rates of heavy trucks will weaken the advantages of IoT. Moreover, IoT products occupies a 10\% lower market share compared to conventional ones under the same pricing strategy but achieves similar market share under the same value-added strategy.}, - keywords = {Agent-based modelling (AB),Internet of Things (IoT),Life cycle assessment (LCA),Life cycle costing (LCC),Sustainable supply chain (SSC),System dynamics (SD)}, - file = {/Users/fabio/Zotero/storage/Y68IRQ4E/S0959652623027166.html} -} - -@article{Dintcheva1997, - title = {Recycling of Plastics from Packaging}, - author = {Dintcheva, N.Tzankova and Jilov, N and La Mantia, F.P.}, - year = {1997}, - month = aug, - journal = {Polymer Degradation and Stability}, - volume = {57}, - number = {2}, - pages = {191--203}, - issn = {01413910}, - doi = {10.1016/S0141-3910(96)00232-7}, - file = {/Users/fabio/Zotero/storage/3ZDBLJFK/Dintcheva, Jilov, La Mantia - 1997 - Recycling of plastics from packaging.pdf} -} - -@article{disalvoAdversarialDesign2018, - title = {Adversarial {{Design}}}, - author = {DiSalvo, Carl}, - year = {2018}, - month = dec, - journal = {Adversarial Design}, - publisher = {{The MIT Press}}, - doi = {10.7551/MITPRESS/8732.001.0001}, - urldate = {2022-03-13}, - abstract = {In Adversarial Design, Carl DiSalvo examines the ways thattechnology design can provoke and engage the political. He describes a practice, which he terms"adversarial design," that uses the means and forms of design to challenge beliefs,values, and what is taken to be fact. It is not simply applying design to politics--attempting toimprove governance, for example, by redesigning ballots and polling places; it is implicitlycontestational and strives to question conventional approaches to political issues. DiSalvo exploresthe political qualities and potentials of design by examining a series of projects that span designand art, engineering and computer science, agitprop and consumer products. He views these projects--which include computational visualizations of networks of power and influence, therapy robots thatshape sociability, and everyday objects embedded with microchips that enable users to circumventsurveillance--through the lens of agonism, a political theory that emphasizes contention asfoundational to democracy. Each of these projects engages one of three categories as amedium--information, robots, and ubiquitous computing--and in each of them certain distinctivequalities of computation are used for political ends or to bring forth political issues. DiSalvo'silluminating analysis aims to provide design criticism with a new approach for thinking about therelationship between forms of political expression, computation as a medium, and the processes andproducts of design.} -} - -@article{diUnitedStatesPlastics2021, - title = {United {{States}} Plastics: {{Large}} Flows, Short Lifetimes, and Negligible Recycling}, - author = {Di, Jinghan and Reck, Barbara K. and Miatto, Alessio and Graedel, Thomas E.}, - year = {2021}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {167}, - pages = {105440}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105440}, - urldate = {2021-02-14}, - abstract = {Given increasing concerns for the marine environment and human health, as well as trade restrictions from Asian countries, plastics have become a great challenge for the United States. This study addresses the seven commonly used plastics: low-density polyethylene/linear low-density polyethylene, high-density polyethylene, polyethylene terephthalate (PET), polypropylene, polystyrene, polyvinyl chloride, and other plastics. Material flows of the seven polymers were tracked from production into fabrication, manufacturing, flow into use, waste management, and recycling in the United States in 2015. Low- and high-density polyethylene and polypropylene were found to be the largest in both production and product manufacture. More than 88\% of the plastics went into three end-use sectors: Packaging, Consumer and Institutional Products, and Building and Construction. In-use lifetimes across the plastics are generally short. Virgin plastics were mainly exported, while intermediate plastic products were largely imported. The actual end-of-life recycling rate of the plastics as a group was no more than 6.2\%, with PET and the polyethylene family the most recycled. The high yearly plastic throughput and low recycling rate pose a serious challenge to the sustainability goals of the United States and is in stark contrast to the vision of a circular economy of plastics.}, - keywords = {Circular economy,Industrial ecology,Material flow analysis,Recovery,Recycling,Waste management} -} - -@article{Diwekar2021, - title = {A Perspective on the Role of Uncertainty in Sustainability Science and Engineering}, - author = {Diwekar, U. and {Amekudzi-Kennedy}, A. and Bakshi, B. and Baumgartner, R. and Boumans, R. and Burger, P. and Cabezas, H. and Egler, M. and Farley, J. and Fath, B. and Gleason, T. and Huang, Y. and Karunanithi, A. and Khanna, V. and Mangan, A. and Mayer, A.L. and Mukherjee, R. and Mullally, G. and {Rico-Ramirez}, V. and Shonnard, D. and Svanstr{\"o}m, M. and Theis, T.}, - year = {2021}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {164}, - pages = {105140}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105140}, - urldate = {2020-09-13}, - file = {/Users/fabio/Zotero/storage/GF4TZGCT/full-text.pdf} -} - -@article{Dizon2018, - title = {Mechanical Characterization of {{3D-printed}} Polymers}, - author = {Dizon, John Ryan C. and Espera, Alejandro H. and Chen, Qiyi and Advincula, Rigoberto C.}, - year = {2018}, - month = mar, - journal = {Additive Manufacturing}, - volume = {20}, - pages = {44--67}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2017.12.002}, - abstract = {3D printing, more formally known as Additive Manufacturing (AM), is already being adopted for rapid prototyping and soon rapid manufacturing. This review provides a brief discussion about AM and also the most employed AM technologies for polymers. The commonly-used ASTM and ISO mechanical test standards which have been used by various research groups to test the strength of the 3D-printed parts have been reported. Also, a summary of an exhaustive amount of literature regarding the mechanical properties of 3D-printed parts is included, specifically, properties under different loading types such as tensile, bending, compressive, fatigue, impact and others. Properties at low temperatures have also been discussed. Further, the effects of fillers as well as post-processing on the mechanical properties have also been discussed. Lastly, several important questions to consider in the standardization of mechanical test methods have been raised.}, - isbn = {1111111111}, - pmid = {26873110}, - keywords = {3D printing,Additive manufacturing,Mechanical properties and standards,Polymer,Polymer nanocomposites,Post-processing}, - file = {/Users/fabio/Zotero/storage/KBWTXBTN/Mechanical characterization of 3D-printed polymers(2).pdf;/Users/fabio/Zotero/storage/NRGLJ9GQ/Mechanical characterization of 3D-printed polymers.pdf} -} - -@article{Dlmitrov, - title = {An Lnvestigation of the {{Capability Profile}} of the Three {{Dimensional Printing Process}} with an Emphasis on the Achievable Accuracy}, - author = {Dlmitrov, D and Schrevel, K and Schreve, K and {de Beer}, N and Meljer, J}, - number = {1}, - pages = {1--4}, - keywords = {3d prlntlng,accuracy,rapld prototyplng}, - file = {/Users/fabio/Zotero/storage/L9B7S5IL/An lnvestigation of the Capability Profile of the three Dimensional Printing Process with an emphasis on the achievable accuracy.pdf} -} - -@article{Document2014, - title = {Tol\'erances et \'Ecarts Dimensionnels, G\'eom\'etriques et d'\'etats de Surface}, - author = {Document, Archives}, - year = {2014}, - volume = {33}, - number = {0}, - file = {/Users/fabio/Zotero/storage/UZ5D8GAC/Tolérances et écarts dimensionnels, géométriques et d'états de surface.pdf} -} - -@article{Dodbiba2008, - title = {The Recycling of Plastic Wastes from Discarded {{TV}} Sets: Comparing Energy Recovery with Mechanical Recycling in the Context of Life Cycle Assessment}, - author = {Dodbiba, Gjergj and Takahashi, Kunihiko and Sadaki, Jun and Fujita, Toyohisa}, - year = {2008}, - journal = {Journal of Cleaner Production}, - volume = {16}, - number = {4}, - pages = {458--470}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2006.08.029}, - abstract = {Two treatment options, i.e. energy recovery and mechanical recycling of plastic wastes from discarded TV sets, were compared in the context of life cycle assessment (LCA) methodology. An estimate for the environmental burden of each option was calculated as the sum of the depletion of abiotic resources (ADP), the global warming potential (GWP), the acidification potential (AP), the photo-oxidant formation potential (POCP), the eutrophication potential (EP), and the human toxicity potential (HTP). After calculating the environmental burden of each treatment option, a sensitivity analysis was conducted. The ultimate aim was to indicate which parameters of the system have the strongest influence on the results of the LCA in order to find ways for lowering the environmental burden, and ultimately suggest a "design strategy" for TV sets. The main finding of this study was that mechanical recycling of plastics is more attractive treatment option in environmental terms than incineration for energy recovery, which generates a larger environmental burden. Finally, based on the results of sensitivity analysis, a "design strategy" was suggested, i.e. reducing the number of plastic types being used in the manufacturing process of TVs - preferably excluding the PVC. ?? 2006 Elsevier Ltd. All rights reserved.}, - isbn = {0959-6526}, - keywords = {Energy recovery,Life cycle assessment,Mechanical recycling,Plastic wastes,Sensitivity analysis}, - file = {/Users/fabio/Zotero/storage/VZJ7XJA8/The recycling of plastic wastes from discarded TV sets comparing energy recovery with mechanical recycling in the context of life cycle.pdf} -} - -@misc{dogucuToolsRecommendationsReproducible2022, - title = {Tools and {{Recommendations}} for {{Reproducible Teaching}}}, - author = {Dogucu, Mine and {Cetinkaya-Rundel}, Mine}, - year = {2022}, - month = feb, - number = {arXiv:2202.09504}, - eprint = {2202.09504}, - primaryclass = {stat}, - publisher = {{arXiv}}, - urldate = {2022-10-11}, - abstract = {It is recommended that teacher-scholars of data science adopt reproducible workflows in their research as scholars and teach reproducible workflows to their students. In this paper, we propose a third dimension to reproducibility practices and recommend that regardless of whether they teach reproducibility in their courses or not, data science instructors adopt reproducible workflows for their own teaching. We consider computational reproducibility, documentation, and openness as three pillars of reproducible teaching framework. We share tools, examples, and recommendations for the three pillars.}, - archiveprefix = {arxiv}, - keywords = {Statistics - Computation,Statistics - Other Statistics}, - file = {/Users/fabio/Zotero/storage/UBAMR78I/Dogucu y Cetinkaya-Rundel - 2022 - Tools and Recommendations for Reproducible Teachin.pdf;/Users/fabio/Zotero/storage/PC7QRYNW/2202.html} -} - -@article{Dokter, - title = {How Circular Is Current Design Practice? {{Investigating}} Perspectives across Industrial Design and Architecture in the Transition towards a Circular Economy}, - author = {Dokter, Giliam and Thuvander, Liane and Rahe, Ulrike}, - year = {2021}, - month = apr, - journal = {Sustainable Production and Consumption}, - volume = {26}, - pages = {692--708}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.12.032}, - urldate = {2021-01-01}, - abstract = {Keywords: circular economy circular design circular business models industrial design architecture sustainability a b s t r a c t The transition to a circular economy (CE) produces a range of new challenges for designers and requires specific knowledge, strategies, and methods. To date, most studies regarding design for a CE have been theoretical and conceptual, hence, limited research has been conducted on the practical implications of designing for a CE. Therefore, the aim of this study is to provide a better understanding of how design practitioners interpret and implement the CE concept in practice. To capture the complexity of real-world cases, semi-structured interviews were carried out with design practitioners (N = 12) within the disciplines of architecture and industrial design who have actively worked with circularity in a design agency setting. The results show that the practitioners have diverse perspectives on designing for a CE, relating to (1) the circular design process, (2) the effects of the CE on design agencies, (3) the changing role of the designer, and (4) the external factors affecting circular design in practice. Some differences were identified between the architects and industrial designers, with the industrial designers more strongly focused on circular business models and the architects on the reuse of materials on a building level. In addition, circular strategies and associated (similar) terminologies were understood and applied in fundamentally different ways. As the CE blurs boundaries of scale and disciplines, there is a need for universal design frameworks and language. The CE concept is expanding the scope of the design process and driving the integration of new knowledge fields and skills in the design process. The successful implementation of the CE in practice is based on extensive collaboration with stakeholders and experts throughout all stages of the design process. Design agencies have addressed the CE by establishing dedicated CE research and design teams, facilitating knowledge exchange, developing their own circular strategies and methods, and striving for long-term client relationships that foster the engagement of designers with the lifecycles of designed artefacts rather than perceiving design projects as temporary endeavors. Ultimately, a holistic and integral approach towards design in a CE is needed to ensure that the underlying CE goals of contributing to sustainable development and establishing a systemic shift are ongoingly considered.}, - file = {/Users/fabio/Zotero/storage/X67ARTRZ/Dokter, Thuvander, Rahe - 2020 - Sustainable Production and Consumption 26 (2021) 692-708 Sustainable Production and Consumption How cir.pdf} -} - -@article{Domingues2017, - title = {An {{Additive Manufacturing Solution}} to {{Produce Big Green Parts}} from {{Tires}} and {{Recycled Plastics}}}, - author = {Domingues, J. and Marques, T. and Mateus, A. and Carreira, P. and Mal{\c c}a, C.}, - year = {2017}, - journal = {Procedia Manufacturing}, - volume = {12}, - number = {December 2016}, - pages = {242--248}, - publisher = {{The Author(s)}}, - issn = {23519789}, - doi = {10.1016/j.promfg.2017.08.028}, - abstract = {Recycling is crucial for the conservation and improvement of the environment. The reduction of natural resource exploration and recovery of waste are examples of actions to contribute to a sustainable development. Waste from end-of-life tires and undifferentiated plastics represents an environmental problem due to the very high number of tons of used tires and plastics produced, but with a high economic potential because their incorporation into high value-added products is an issue of utmost importance. The manufacturing technologies oriented to the increase in quality levels, functional advantages, structural and financial gains of the produced products are currently a hot topic in industry. Similarly, the use of additive manufacturing technologies, instead of conventional techniques, e.g. moulding to process materials obtained from waste recovery, is a great industrial challenge. In order to promote greater environmental responsibility and to present innovative solutions for the management and sustainable destination of used waste recovery from tires and undifferentiated plastics, a composite made from the blend of 60\% of tire waste granulate and 40\% of polypropylene (PP) recycled was tested with the final purpose of generating components with added value. Both waste recovery materials were used in the micronized state. The thermal and mechanical behaviours of the synthesized composite were studied through DSC/TGA analysis and tensile testing. The implementation of additive manufacturing methodologies to process the blends between used tires granulated with a high incorporation of wastes from undifferentiated plastics was also explored in this work in order to produce big green parts without mould needed, such as urban furniture.}, - keywords = {Additive manufacturing,Green parts,Recycled plastics,Recycled tires}, - file = {/Users/fabio/Zotero/storage/NSVU9QJ2/an additive manufacturing solution to produce big green parts from tires and recycled plastics.pdf} -} - -@article{Dosemagen2017, - title = {Gathering for {{Open Science Hardware}} 2016}, - author = {Dosemagen, Shannon and Liboiron, Max and Molloy, Jenny}, - year = {2017}, - journal = {Journal of Open Hardware}, - volume = {1}, - number = {1}, - pages = {1--5}, - doi = {10.5334/joh.5}, - abstract = {{$<$}p class="p1"{$>$}Without hardware, there is no science. Instruments, reagents, computers, and other equipment are essential for producing systematic knowledge. Yet, current supply chains limit access and impede creativity and customization through high mark-ups and proprietary designs, compounded by proprietary hardware licenses and patents. Open Science Hardware (OSH) addresses part of this problem by sharing designs, instructions for building, and protocols. Expanding the reach of OSH within academic research, NGO initiatives, citizen science, and education has potential to increase access to experimental tools and facilitate their customization and reuse. We organized with others the ``Gathering for Open Science Hardware'' (GOSH) in 2016 to address what we see as the primary barrier to OSH: early adopters are disparate and separated by geographical and disciplinary borders which limit interaction, exchange and community building. This inaugural gathering brought together 50 of the most active developers, users, and thinkers in the OSH movement, complemented by expertise from diverse backgrounds, to seed a global community. This article provides a review of the activities and debates we conducted at GOSH 2016.{$<$}/p{$>$}}, - keywords = {open science hardware}, - file = {/Users/fabio/Zotero/storage/PQ7PCQ9E/Gathering for Open Science Hardware 2016.pdf} -} - -@article{dossantosAnalyticHierarchyProcess2019, - title = {The Analytic Hierarchy Process Supporting Decision Making for Sustainable Development: {{An}} Overview of Applications}, - author = {Dos Santos, Paulo Henrique and Neves, Sandra Miranda and Sant'Anna, Daniele Ornaghi and de Oliveira, Carlos Henrique and Carvalho, Henrique Duarte}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {119--138}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.11.270}, - urldate = {2020-06-18}, - abstract = {The three-pillar concept of environmental, economic, and social sustainability is widely known in academia. Research on sustainable development has noted its complex nature, also reflected in the decision-making process, which requires structuration and systematization. To support decision making for sustainable development, many multi-criteria techniques, both isolated or integrated, have been used. Among them, the analytic hierarchy process stands out as the most often used. This study conducts a systematic literature review on the analytic hierarchy process's support for decision making for sustainable development, making it possible to identify gaps and future research pathways. To do so, it gathers, maps, analyzes, and summarizes the academic literature by reviewing 173 manuscripts published between 2014 and 2018, which are indexed by the Web of Science, Scopus, and Science Direct databases. The results, analysis, and discussion of the screened manuscripts are comprised of (a) a descriptive analysis, (b) mental mapping, (c) bibliometric data, (d) an in-depth analysis of the most cited literature, (e) an in-depth analysis of the most recently cited literature, and (f) the clustering of research evolution. The findings substantially elucidate the advancements in the state-of-the-art of the analytic hierarchy process for sustainable development. Implications for research and practice, as well as promising challenges for further research, are presented.}, - keywords = {Analytic hierarchy process,Multi-criteria decision-making,Sustainability,Sustainable development,Systematic literature review} -} - -@article{Dotchev2009, - title = {Recycling of Polyamide 12 Based Powders in the Laser Sintering Process}, - author = {Dotchev, Krassimir and Yusoff, Wan}, - year = {2009}, - month = may, - journal = {Rapid Prototyping Journal}, - volume = {15}, - number = {3}, - pages = {192--203}, - issn = {1355-2546}, - doi = {10.1108/13552540910960299}, - abstract = {Purpose - The purpose of this paper is to investigate the polyamide 12 (PA12) powder properties deterioration in the laser sintering (LS) process and propose a methodology for more efficient powder recycling. The main goals are: to recommend a level of input PA2200 powder properties which could guarantee acceptable part quality in the LS process; and selection of the refresh rate in order to minimise the consumption of fresh material. Design/methodology/approach - The paper analyses the LS processing conditions and current recycling practices in relation to the deterioration or ageing of the PA12-based powders. Samples of new and recycled grades of PA2200 powder were artificially aged in a temperature-controlled oven and then tested using melt flow rate (MFR) indexer. Also, un-sintered powder samples collected from different locations within various builds, and different LS machines (EOSINT P700 and SinterstationUP/UP 2500 HiQ) were tested. Findings - The powder exposed at higher temperature and longer time experiences a much higher deterioration rate. The temperature and the time at which the un-sintered material was exposed are the most influential parameters for the powder aging. It was confirmed that the MFR index is a very sensitive indicator of the changes in the powder properties and provides a relatively fast and inexpensive method of measuring the rate of the powder degradation because of the LS process. The powder located in the periphery and the top of a build has a higher MFR and therefore is less deteriorated. In contrast, powder located in the centre, or in the bottom of a long build has much lower MFR and therefore is less usable. Practical implications - Based on the findings, a methodology for powder recycling is proposed. It allows a better control of the input material properties, a consistent quality of the fabricated parts, and more efficient use of the LS material. Originality/value - The paper provides some useful information for the properties deterioration of PA12-based powders (PA2200) in relation to the temperature and time at which the material is exposed in the LS. \textcopyright{} 2009 Emerald Group Publishing Limited.}, - isbn = {1355254051}, - keywords = {ageing,lasers,materials,paper type research paper,rapid prototypes,sintering}, - file = {/Users/fabio/Zotero/storage/4S6BERQI/Recycling of polyamide 12 based powders in the laser sintering process.pdf} -} - -@book{DoValle2005, - title = {Combining Behavioral Theories to Predict Recycling Involvement}, - author = {Do Valle, Patr{\'i}cia Oom and Rebelo, Efig{\'e}nio and Reis, Elizabeth and Menezez, Jo{\~a}o}, - year = {2005}, - journal = {Environment and Behavior}, - volume = {37}, - issn = {00139165}, - doi = {10.1177/0013916504272563}, - abstract = {This study merges insights from two well-known attitude-behavior theories-the theory of planned behavior and the model of altruistic behavior-with elements from two broader models from environmental psychology-the model of environmental behavior and the model of environmental concern-to propose a comprehensive structural equation model to explain recycling behavior. The specified model is estimated using data from the most recent national survey performed in Portugal on the subject. In general, results support the use of the theory of planned behavior as a basis for modeling recycling participation. However, the integration of this theory with the Schwartz's model is only partially achieved. Another important finding is that recycling behavior is indirectly determined by personal psychological features, such as social conscience, but not by general ecological attitudes. \textcopyright{} 2005 Sage Publications.}, - isbn = {0013916504272}, - keywords = {Behavioral theories,Recycling behavior,Structural equation modeling}, - file = {/Users/fabio/Zotero/storage/RHRSPKLQ/57. Combining behavioral theories to predict recycling involvement.pdf} -} - -@article{dragicevicDeconstructingSustainability2018, - title = {Deconstructing Sustainability}, - author = {Dragicevic, Arnaud Z.}, - year = {2018}, - month = nov, - journal = {Sustainable Development}, - volume = {26}, - number = {6}, - pages = {525--532}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1099-1719}, - doi = {10.1002/SD.1746}, - urldate = {2021-08-29}, - abstract = {The aim of this work is to focus on the mathematical objects of which the embodiment of weak or strong sustainability is made up. Indeed, scholars and essayists have borrowed the geometrical representations of sustainability, with little regard to their nature, in order to back up and illustrate the logic of their propositions. For this reason, we study the underlying properties of Venn and concentric diagrams. Given the complex, sometimes even inconsistent, interpretations of weak and strong pathways leading to sustainable development, analyzing the latter from the perspective of its visuals, through objects such as sets and hypergraphs, enables us to dig out invisible connections and contrasts between the underlying structures.}, - keywords = {concentric diagram,deconstruction,set theory,sustainability,sustainable development,Venn diagram}, - file = {/Users/fabio/Zotero/storage/5GUNJDGJ/full-text.pdf} -} - -@article{Drain1981, - title = {Polymer {{Waste}} - {{Resouce Recovery}}}, - author = {Drain, K F and Murphy, W.R. and Otterburn, M.S.}, - year = {1981}, - journal = {Conservation \& Recycling}, - volume = {4}, - number = {4}, - pages = {201--218}, - abstract = {This paper reviews the types of plastic wastes that are generated in industry and in home, and considers the methods that are available for their primary, secondary and tertiary recycling. It discusses the political, economic, market development and technological factors that determine whether plastic wastes are dumped or recycled for their material or energy contents.}, - file = {/Users/fabio/Zotero/storage/DG23NTCZ/Polymer Waste - Resouce Recovery.pdf} -} - -@article{Drayton2011, - title = {Ashoka's Theory of Change}, - author = {Drayton, Bill}, - year = {2011}, - journal = {SSRN Electron. J.}, - number = {703}, - doi = {10.2139/ssrn.980092}, - abstract = {Ashoka's job is to make "everyone a changemaker." To help create a world where everyone has the freedom, confidence, and skills to turn challenges into solutions. This allows each person the fullest, richest life. This document discusses the evolution of the citizen sector and Ashoka's role: from its beginnings as an investor in the world's leading social entrepreneurs towards its emerging focus on community and infrastructure building.} -} - -@article{Dritsas2018, - title = {Digital Fabrication with Natural Composites}, - author = {Dritsas, Stylianos and Halim, Samuel E. P. and Vijay, Yadunund and Sanandiya, Naresh G. and Fernandez, Javier G.}, - year = {2018}, - month = dec, - journal = {Construction Robotics}, - volume = {2}, - number = {1-4}, - pages = {41--51}, - issn = {2509-811X}, - doi = {10.1007/s41693-018-0011-0} -} - -@article{Drizo2006, - title = {Environmental Impacts of Rapid Prototyping: An Overview of Research to Date}, - author = {Drizo, Aleksandra and Pegna, Joseph}, - year = {2006}, - journal = {Rapid Prototyping Journal}, - volume = {12}, - number = {2}, - pages = {64--71}, - issn = {1355-2546}, - doi = {10.1108/13552540610652393}, - abstract = {This paper seeks to provide a comprehensive state of the art review of environmental impact assessment (EIA) of existing rapid prototyping (RP) and rapid tooling (RT), and identify prospective research needs. The sparse literature on the EIA of RP and RT is balanced by that of the comparatively mature field of industrial ecology (IE). Hence, the review emphasizes portable IE measurement and evaluations methods. As RP and RT can also be viewed as design tools and mass customization manufacturing, other EIA may be needed. The scarcity of research to date combined with rapid technological advances leaves a large number of unresolved issues. In addition, the special character of RP and RT, as design and manufacturing enablers implies that future research is needed.}, - isbn = {13552546 (ISSN)}, - keywords = {environmental management,paper type literature review,rapid prototypes}, - file = {/Users/fabio/Zotero/storage/BZ9AZRV3/Drizo, Pegna - 2006 - Environmental impacts of rapid prototyping an overview of research to date.pdf} -} - -@article{Drummer2015, - title = {Modelling of the Aging Behavior of Polyamide 12 Powder during Laser Melting Proceb}, - author = {Drummer, Dietmar and Wudy, Katrin and Drexler, Maximilian}, - year = {2015}, - journal = {AIP Conference Proceedings}, - volume = {1664}, - issn = {15517616}, - doi = {10.1063/1.4918514}, - abstract = {Concerning individualization, the requirements to products have increased. Additive manufacturing technologies, such as selective laser melting allow manufacturing of complex parts without tools and forms. Due to this additive manufacturing processes comply, in opposite to conventional techniques, with these increased demands on processing technology. Due to the high temperature during processing, a degradation of the used plastic powder occurs. The non-molten material in the building chamber, the so-called partcake, can be removed after building from the finished component and reused for another process. To realize reproducible part properties refreshing of partcake powder with 30 up to 50 \% virgin powder is necessary. However, these refreshing strategies lead to varying component properties due to an undefined aging state. Previous investigations on oven aged powder for selective laser melting showed for short periods of storage near the melting point thermally induced post condensation is the predominate aging effect. Due to post condensation the molecular weight and thus the viscosity increases. This paper focuses on the modeling of the post condensation process to define the aging state of polyamide 12 powder in laser melting process. Therefore the rheological behavior of PA 12 powder in dependency of time and temperature is investigated. Isothermal viscosity measurements are conducted in order to describe the post condensation\textbackslash r\textbackslash nreaction with a model. With knowledge of the kinetics of the post condensation\textbackslash r\textbackslash nreaction the state of aging can be predicted in a second step. Thus expected useful life of the powder can be calculated in dependency of the building chamber temperature. These results are then compared with viscosity values of defined aged PA 12 powder to validate the determined model.}, - isbn = {9780735413092}, - keywords = {Aging,Modelling,Polyamide 12,Selective Laser Melting} -} - -@article{Drumright2000, - title = {Polylactic {{Acid Technology}}}, - author = {Drumright, R. E. and Gruber, P. R. and Henton, D. E.}, - year = {2000}, - month = dec, - journal = {Advanced Materials}, - volume = {12}, - number = {23}, - pages = {1841--1846}, - issn = {0935-9648}, - doi = {10.1002/1521-4095(200012)12:23<1841::AID-ADMA1841>3.0.CO;2-E}, - urldate = {2014-09-12}, - file = {/Users/fabio/Zotero/storage/WMZCGYTZ/Drumright, Gruber, Henton - 2000 - Polylactic Acid Technology.pdf} -} - -@article{duballetClassificationBuildingSystems2017, - title = {Classification of Building Systems for Concrete {{3D}} Printing}, - author = {Duballet, R. and Baverel, O. and Dirrenberger, J.}, - year = {2017}, - journal = {Automation in Construction}, - volume = {83}, - number = {August}, - pages = {247--258}, - issn = {09265805}, - doi = {10.1016/j.autcon.2017.08.018}, - abstract = {In the present paper, a study is conducted on building systems associated with concrete extrusion-based additive manufacturing techniques. Specific parameters are highlighted - concerning scale, environment, support, and assembly strategies - and a classification method is introduced. The objective is to explicitly characterise construction systems based on such printing processes. A cartography of the different approaches and subsequent robotic complexity is proposed. The state of the art gathered from the literature is mapped thanks to this classification. It appears that the disruption potential brought by concrete 3D printing has not been fully embraced yet.} -} - -@article{Dubois2000, - title = {Prototypage Rapide - {{G\'en\'eralit\'es}}}, - author = {Dubois, Patrice and Aoussat, Am{\'e}ziane}, - year = {2000}, - journal = {Techniques de l'ingenieur}, - volume = {33}, - number = {0}, - file = {/Users/fabio/Zotero/storage/8FUXE9DF/Prototypage rapide - Généralités.pdf} -} - -@article{duboisPrecariteEnergetiqueMilieu2015, - title = {{La pr\'ecarit\'e \'energ\'etique en milieu urbain. Vers une analyse en termes de vuln\'erabilit\'e}}, - author = {Dubois, Ute}, - year = {2015}, - journal = {Les Annales de la Recherche Urbaine}, - volume = {110}, - number = {1}, - pages = {186--195}, - publisher = {{Pers\'ee - Portail des revues scientifiques en SHS}}, - doi = {10.3406/aru.2015.3179}, - urldate = {2023-02-15}, - abstract = {Cet article examine le ph\'enom\`ene de pr\'ecarit\'e \'energ\'etique urbaine en France. Parce qu'elle peut prendre diff\'erentes formes, elle est mal appr\'ehend\'ee par des indicateurs comme le taux d'effort \'energ\'etique et fut longtemps sous-estim\'ee. Initialement exclus du principal programme de r\'enovation thermique, destin\'e aux propri\'etaires de maisons individuelles, les pr\'ecaires \'energ\'etiques urbains b\'en\'eficient cependant de politiques mises en place localement, le plus souvent sous forme d'aides financi\`eres. Les analyses r\'ecentes en termes de vuln\'erabilit\'e \'energ\'etique permettent d'enrichir la compr\'ehension du ph\'enom\`ene. Ainsi, les approches centr\'ees sur la vuln\'erabilit\'e des personnes mettent en \'evidence l'importance du ph\'enom\`ene chez les jeunes urbains, et plus g\'en\'eralement les ch\^omeurs et m\'enages \`a tr\`es bas revenus, susceptibles de basculer vers la pr\'ecarit\'e \'energ\'etique. Les approches en termes de vuln\'erabilit\'e \'energ\'etique des territoires pourraient permettre d'identifier les zones g\'eographiques et les types d'habitat \`a cibler prioritairement en mati\`ere de lutte contre la pr\'ecarit\'e \'energ\'etique.}, - copyright = {free}, - langid = {fre}, - file = {/Users/fabio/Zotero/storage/BCJUQXGM/Dubois - 2015 - La précarité énergétique en milieu urbain. Vers un.pdf} -} - -@article{Dubravcik2012, - title = {Application of {{Reverse Engineering Techniques}} in {{Mechanics System Services}}}, - author = {D{\'u}brav{\v c}{\'i}k, Michal and Kender, {\v S}tefan}, - year = {2012}, - month = jan, - journal = {Procedia Engineering}, - volume = {48}, - pages = {96--104}, - issn = {18777058}, - doi = {10.1016/j.proeng.2012.09.491}, - urldate = {2012-11-29}, - file = {/Users/fabio/Zotero/storage/QMZCJ9QT/Application of Reverse Engineering Techniques in Mechanics System Services.pdf} -} - -@article{duchiHowGrowthMindset2020, - title = {How a Growth Mindset Can Change the Climate: {{The}} Power of Implicit Beliefs in Influencing People's View and Action}, - author = {Duchi, Lorenzo and Lombardi, Doug and Paas, Fred and Loyens, Sofie M.M.}, - year = {2020}, - month = jun, - journal = {Journal of Environmental Psychology}, - pages = {101461}, - publisher = {{Academic Press}}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2020.101461}, - urldate = {2020-06-22} -} - -@article{Duddleston2016, - title = {Differential {{Scanning Calorimetry}} ( {{DSC}} ) {{Quantification}} of {{Polyamide}} 12 ( {{Nylon}} 12 ) {{Degradation}} during the {{Selective Laser Sintering}} ( {{SLS}} ) {{Process}}}, - author = {Duddleston, Lukas J L and Puck, Andrew T and Harris, Alexander and Doll, Neil P and Osswald, Tim A}, - year = {2016}, - journal = {Antec}, - volume = {12}, - number = {Nylon 12}, - pages = {1--4}, - abstract = {Selective laser sintering, a 3dimensional printing technique, converts powdered thermoplastic resins, e.g. polyamide 12 (nylon 12), into enduse parts by using a laser to melt and fuse the particles. In this layerbylayer additive manufacturing process, the powder is both the raw material and the mold. Therefore, unsintered powder can be recovered and recycled in subsequent builds to significantly decrease net costs. To improve blending protocols, the powder quality, i.e. the degree of degradation, was quantified using differential scanning calorimetry. Contrary to the work of others, the results suggested that the sensitivity of differential scanning calorimetry to small changes in molecular weight could reproducibly detect small changes in ovenaged (degraded) powder.}, - isbn = {9780692719619}, - file = {/Users/fabio/Zotero/storage/VJY7X6Y6/Differential Scanning Calorimetry ( DSC ) Quantification of Polyamide 12 ( Nylon 12 ) Degradation during the Selective Laser Sintering (.pdf} -} - -@article{Dudek2011, - title = {One {{Way ANOVA}} with {{R}}: {{Completely Randomized Design}}}, - author = {Dudek, Bruce}, - year = {2011}, - journal = {SpringerReference}, - file = {/Users/fabio/Zotero/storage/IQRMVCYP/oneway_anova_basics.pdf} -} - -@article{duEnrichingConceptSolution2022, - title = {Enriching the Concept of Solution Space for Climate Adaptation by Unfolding Legal and Governance Dimensions}, - author = {Du, Haomiao and Triyanti, Annisa and Hegger, Dries L.T. and Gilissen, Herman Kasper and Driessen, Peter P.J. and {van Rijswick}, Helena F.M.W.}, - year = {2022}, - month = jan, - journal = {Environmental Science \& Policy}, - volume = {127}, - pages = {253--262}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.10.021}, - urldate = {2021-11-07} -} - -@book{Duggan2016, - title = {System {{Dynamics Modeling}} with {{R}}: {{Lecture Notes}} in {{Social Networks}}}, - author = {Duggan, Jim}, - year = {2016}, - doi = {10.1007/978-3-319-34043-2}, - abstract = {This new interdisciplinary work presents system dynamics as a powerful approach to enable analysts build simulation models of social systems, with a view toward enhancing decision making. Grounded in the feedback perspective of complex systems, the book provides a practical introduction to system dynamics, and covers key concepts such as stocks, flows, and feedback. Societal challenges such as predicting the impact of an emerging infectious disease, estimating population growth, and assessing the capacity of health services to cope with demographic change can all benefit from the application of computer simulation. This text explains important building blocks of the system dynamics approach, including material delays, stock management heuristics, and how to model effects between different systemic elements. Models from epidemiology, health systems, and economics are presented to illuminate important ideas, and the R programming language is used to provide an open-source and interoperable way to build system dynamics models. System Dynamics Modeling with R also describes hands-on techniques that can enhance client confidence in system dynamic models, including model testing, model analysis, and calibration. Developed from the author's course in system dynamics, this book is written for undergraduate and postgraduate students of management, operations research, computer science, and applied mathematics. Its focus is on the fundamental building blocks of system dynamics models, and its choice of R as a modeling language make it an ideal reference text for those wishing to integrate system dynamics modeling with related data analytic methods and techniques. An Introduction to System Dynamics -- An Introduction to R -- Modeling Limits to Growth -- Higher Order Models -- Diffusion Models -- Model Testing -- Model Analysis and Calibration -- Appendix A: Installing R and R Studio.}, - isbn = {978-3-319-34043-2}, - file = {/Users/fabio/Zotero/storage/3IWA39B7/System Dynamics Modeling with R.pdf} -} - -@article{Dumoulin2017, - title = {A {{Framework}} for {{Accurately Informing Facilitated Regional Industrial Symbioses}} on {{Environmental Consequences}}}, - author = {Dumoulin, Fran{\c c}ois and Wassenaar, Tom and Avad{\'i}, Angel and Paillat, Jean Marie}, - year = {2017}, - month = oct, - journal = {Journal of Industrial Ecology}, - volume = {21}, - number = {5}, - pages = {1049--1067}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {15309290}, - doi = {10.1111/jiec.12495}, - urldate = {2022-02-22}, - abstract = {Facilitated regional industrial symbiosis (FRIS) initiatives mainly aim at increasing regional resource-use efficiency, but should also assess and anticipate other environmental consequences of the intended structural system changes. To successfully embed environmental criteria in an FRIS process, the environmental impacts resulting from induced system changes should comprehensively address all environmental aspects relevant to stakeholders. Normative environmental assessment frameworks used in FRIS, such as life cycle assessment, fail to address the ambiguity surrounding the concept of environment itself and its social foundations. The ``environment'' is a polysemous (i.e., has multiple meanings), relative and subjective construction and environmental consequences of FRIS initiative should be selected by means of environmental assessment frameworks that enable subjective identification of environmental phenomena of interest. We propose such an environmental assessment framework providing both (1) a logical basis accommodating all FRIS stakeholders' perceptions of the environment and environmental consequences and (2) a method, embedding that logical basis, for the consideration of environmental consequences in FRIS. The logical basis is built by conceptually structuring independent key elements of the perception of ``environment,'' that is, the relation between environmental consequences and FRIS stakeholders (object-subject relation). This generic environmental assessment framework contrasts with the direct use of normative frameworks under which both the phenomena of interest and their indicators are conflated and predefined. The proposed framework is partially illustrated by describing its application to a specific case: the identification of phenomena of interest within an FRIS process aiming to recycle organic residues in R\'eunion.}, - keywords = {anthropocentrism,environment,environmental assessment framework,facilitated regional industrial symbiosis,industrial ecology,phenomena of interest}, - file = {/Users/fabio/Zotero/storage/XVSX4MQD/Dumoulin et al. - 2017 - A Framework for Accurately Informing Facilitated Regional Industrial Symbioses on Environmental Consequences.pdf} -} - -@article{duMultistakeholdersPreferenceBest2019, - title = {Multi-Stakeholders' Preference for Best Management Practices Based on Environmental Awareness}, - author = {Du, Yi and Wang, Xiaoyan and Zhang, Lulu and Feger, Karl Heinz and Popp, Jennie and Sharpley, Andrew}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117682}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117682}, - urldate = {2020-06-18}, - abstract = {Stakeholder participation is crucial in solving environmental problems, especially in rural areas. This research investigates multi-stakeholders environmental awareness and preferences for best management practices (BMPs) in water conservation zones of north China for tackling non-point source pollution issue. A sample of 287 stakeholders involving 62 environmental officials, 18 volunteers, 73 left-behind villagers, and 130 migrant workers were interviewed. New Ecological Paradigm (NEP) Scale and Principal component analysis were used to evaluate stakeholder's environmental awareness, preference for BMPs and factors influencing awareness and preference. Results show that engineering BMPs generally have a higher acceptance than management BMPs which can guide proper farming practices to reduce the likelihood of contamination from the source. Among the management measures, the preference for nutrient management was higher than that of tillage management. Considerable preference heterogeneity exists among different stakeholder groups in terms of BMPs in the case study area. Overall, environmental officials and volunteers are more supportive for implementing BMPs than left-behind farmers and migrant workers. In terms of implementation, environmental officials and volunteers tend to pay more attention to both the environmental benefit and economic benefit, while left-behind farmers and migrant workers focus more on economic benefit. To gain more economic benefit, people in areas with low economic levels are more willing to accept these measures to improve the status quo of living environment and income. Principal component analysis shows that demographics (23.6\%), environmental awareness (15\%), policies (13.6\%) and economic (12.8\%) can influence stakeholders' preference for BMPs. The cumulative contribution of the four factors accounts for 65\%. The results suggest that decision makers need to coordinate multi-interest among the stakeholders and emphasize stakeholder consultation to meet local stakeholders' needs. We provide implications to policy-makers for revising existing or introducing adequate incentives to motivate local stakeholders and increase their support for implementing BMPs, instead of using enforcement.}, - keywords = {Best management practices,Environmental awareness,Preference,Stakeholders} -} - -@article{Dunford2018a, - title = {Integrating Methods for Ecosystem Service Assessment: {{Experiences}} from Real World Situations}, - author = {Dunford, Rob and Harrison, Paula and Smith, Alison and Dick, Jan and Barton, David N. and {Martin-Lopez}, Berta and Kelemen, Ezsther and Jacobs, Sander and Saarikoski, Heli and Turkelboom, Francis and Verheyden, Wim and Hauck, Jennifer and Antunes, Paula and Aszal{\'o}s, R{\'e}ka and Badea, Ovidu and Bar{\'o}, Francesc and Berry, Pam and Carvalho, Laurence and Conte, Giulio and Cz{\'u}cz, B{\'a}lint and Garcia Blanco, Gemma and Howard, Dave and Giuca, Relu and {Gomez-Baggethun}, Erik and Grizetti, Bruna and Izakovicova, Zita and Kopperoinen, Leena and Langemeyer, Johannes and Luque, Sandra and Lapola, David M. and {Martinez-Pastur}, Guillermo and Mukhopadhyay, Raktima and Roy, S. B. and Niemel{\"a}, Jari and Norton, Lisa and Ochieng, John and Odee, David and Palomo, Ignacio and Pinho, Patricia and Priess, Joerg and Rusch, Graciella and Saarela, Sanna-Riikka Riikka and Santos, Rui and {van der Wal}, Jan Tjalling and Vadineanu, Angheluta and V{\'a}ri, {\'A}gnes and Woods, Helen and {Yli-Pelkonen}, Vesa and Blanco, Gemma Garcia and Howard, Dave and Giuca, Relu and {Gomez-Baggethun}, Erik and Grizzetti, Bruna and Izakovicova, Zita and Kopperoinen, Leena and Langemeyer, Johannes and Luque, Sandra and Lapola, David M. and {Martinez-Pastur}, Guillermo and Mukhopadhyay, Raktima and Roy, S. B. and Niemel{\"a} Aa, Jari and Norton, Lisa and Ochieng, John and Odee, David and Palomo, Ignacio and Pinho, Patricia and Priess, Joerg and Rusch, Graciella and Saarela, Sanna-Riikka Riikka and Santos, Rui and Tjalling Van Der Wal, Jan and Vadineanu, Angheluta and V{\'a}ri, {\'A}gnes and Woods, Helen and {Yli-Pelkonen}, Vesa}, - year = {2018}, - month = feb, - journal = {Ecosystem Services}, - volume = {29}, - pages = {499--514}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.10.014}, - urldate = {2021-04-23}, - abstract = {The Ecosystem Services (ES) concept highlights the varied contributions the environment provides to humans and there are a wide range of methods/tools available to assess ES. However, in real-world decision contexts a single tool is rarely sufficient and methods must be combined to meet practitioner needs. Here, results from the OpenNESS project are presented to illustrate the methods selected to meet the needs of 24 real-world case studies and better understand why and how methods are combined to meet practical needs. Results showed that within the cases methods were combined to: i) address a range of ES; ii) assess both supply and demand of ES; iii) assess a range of value types; iv) reach different stakeholder groups v) cover weaknesses in other methods used and vi) to meet specific decision context needs. Methods were linked in a variety of ways: i) as input\textendash output chains of methods; ii) through learning; iii) through method development and iv) through comparison/triangulation of results. The paper synthesises these case study-based experiences to provide insight to others working in practical contexts as to where, and in what contexts, different methods can be combined and how this can add value to case study analyses.}, - file = {/Users/fabio/Zotero/storage/326SISAE/Integrating-methods-for-ecosystem-service-assessment--Exper_2018_Ecosystem-S.pdf;/Users/fabio/Zotero/storage/IZEMNALR/Dunford et al. - 2018 - Integrating methods for ecosystem service assessment Experiences from real world situations(2).pdf;/Users/fabio/Zotero/storage/MNRJWKA7/Dunford et al. - 2018 - Integrating methods for ecosystem service assessment Experiences from real world situations.pdf} -} - -@article{Dunlap1978, - title = {The "{{New Environmental Paradigm}}"}, - author = {Dunlap, Riley E. and Van Liere, Kent D.}, - year = {1978}, - journal = {The Journal of Environmental Education}, - volume = {9}, - number = {1}, - pages = {10--19}, - issn = {0095-8964}, - doi = {10.3200/JOEE.40.1.19-28}, - isbn = {00958964}, - pmid = {35041902}, - file = {/Users/fabio/Zotero/storage/58UDQV3A/The New Environmental Paradigm.pdf} -} - -@article{Dunlap2008, - title = {The {{New Environmental Paradigm Scale}}: {{From Marginality}} to {{Worldwide Use}}}, - author = {Dunlap, Riley E.}, - year = {2008}, - journal = {The Journal of Environmental Education}, - volume = {40}, - number = {1}, - pages = {3--18}, - issn = {0095-8964}, - doi = {10.3200/JOEE.40.1.3-18}, - abstract = {The New Environmental Paradigm (NEP) Scale, published in The Journal of Environmental Education by R. E. Dunlap and K. D. Van Liere (1978), has become the most widely used measure of environmental concern in the world and been employed in hundreds of studies in dozens of nations. This article tells the story of the NEP Scale, beginning with how the author developed the notion of an environmental paradigm and then decided to measure it. The author describes the original NEP Scale and its 3 revisions, 1 of which is rapidly replacing the 1978 ver- sion in most studies. The author then reviews current uses of the various NEP Scales and examines major criticisms of them. Last, the author discusses the failure of an ecological worldview to become institutionalized in the United States, stemming from intense opposition to it since the 1990s, and the need to understand the sources of this opposition and monitor the situation. KEYWORDS:}, - isbn = {00958964}, - pmid = {35041901}, - keywords = {1978,30 years later i,become the new environmental,dunlap,ecological worldview,environmental paradigm scale,i never imagined that,n 1975,nep,new,new ecological paradigm,new environmental paradigm,paradigm,scale,that included what would,van liere,when designing a survey,would}, - file = {/Users/fabio/Zotero/storage/SYHKVZPR/The New Environmental Paradigm Scale From Marginality to Worldwide Use.pdf} -} - -@article{Dunnigan2018, - title = {Beneficial Usage of Recycled Polymer Particulates for Designing Novel {{3D}} Printed Composites}, - author = {Dunnigan, R. and Clemens, J. and Cavalli, M. N. and Kaabouch, N. and Gupta, S.}, - year = {2018}, - month = jun, - journal = {Progress in Additive Manufacturing}, - volume = {3}, - number = {1-2}, - pages = {33--38}, - publisher = {{Springer International Publishing}}, - issn = {2363-9512}, - doi = {10.1007/s40964-018-0046-2}, - isbn = {0123456789}, - keywords = {additive manufacturing,Additive Manufacturing,recycling and composites,Recycling and Composites,sustainability,Sustainability,tribology,Tribology}, - file = {/Users/fabio/Zotero/storage/7WM5BEDZ/beneficial usage of recycled polymer particulates for designing novel 3d printed composites.pdf} -} - -@article{DuPisani2006, - title = {Sustainable Development \textendash{} Historical Roots of the Concept}, - author = {Du Pisani, Jacobus A.}, - year = {2006}, - journal = {Environmental Sciences}, - volume = {3}, - number = {2}, - pages = {83--96}, - issn = {1569-3430}, - doi = {10.1080/15693430600688831}, - abstract = {This article gives an overview of the origin of the concept of sustainable development by going far back in history to trace its roots. It shows how the idea of sustainability evolved through the centuries as a counter to notions of progress. The historical context in the latter half of the 20th century is outlined, in which a paradigm shift in thinking about development caused sustainable development to occupy the centre stage in development discourses.}, - isbn = {1569-3430}, - keywords = {development,economic growth,history,progress,sustainability,sustainable development}, - file = {/Users/fabio/Zotero/storage/I3XTNMPV/Du Pisani - 2006 - Sustainable development – historical roots of the concept.pdf} -} - -@article{DuPlessis2019, - title = {Beautiful and {{Functional}}: {{A Review}} of {{Biomimetic Design}} in {{Additive Manufacturing}}}, - author = {{du Plessis}, Anton and Broeckhoven, Chris and Yadroitsava, Ina and Yadroitsev, Igor and Hands, Clive H. and Kunju, Ravi and Bhate, Dhruv}, - year = {2019}, - month = may, - journal = {Additive Manufacturing}, - volume = {27}, - pages = {408--427}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.03.033} -} - -@inproceedings{Dupont2014, - title = {Study Case: {{Living Lab Mode}} for Urban Project Design: {{Emergence}} of an Ad Hoc Methodology through Collaborative Innovation}, - booktitle = {2014 {{International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}})}, - author = {Dupont, Laurent and Morel, Laure and Hubert, Julien and Guidat, Claudine}, - year = {2014}, - pages = {1--9}, - publisher = {{IEEE}}, - address = {{Bergamo}}, - doi = {10.1109/ICE.2014.6871550}, - isbn = {978-1-4799-4735-5}, - keywords = {co-design,Living lab,participatory process,urban project,users}, - file = {/Users/fabio/Zotero/storage/TFQJ7VPG/Living Lab Mode for urban project design. Emergence of an ad hoc methodology through collaborative innovation.pdf} -} - -@article{Dupont2015, - title = {Innovative Public-Private Partnership to Support {{Smart City}}: The Case of ``{{Chaire REVES}}''}, - author = {Dupont, Laurent and Morel, Laure and Guidat, Claudine}, - year = {2015}, - journal = {Journal of Strategy and Management}, - volume = {8}, - number = {3}, - pages = {245--265}, - issn = {1755-425X}, - doi = {10.1108/JSMA-03-2015-0027}, - abstract = {Purpose \textendash{} The purpose of this paper is to discuss how French universities can play a key role in generating Smart City (SC) through an innovative Public-Private Partnership (PPP) dedicated to urban transformation. Design/methodology/approach \textendash{} The authors led an action-research study for five years with several research and pedagogic projects, including users or citizens. Findings \textendash{} The paper points out main factors of SC development. It also presents shared demonstrators' characteristics, including industrial scale, sustainability, and citizens' participation. Research limitations/implications \textendash{} This research is experimented with only one regional multi-case study. Practical implications \textendash{} Practical implications of this paper include a University of Lorraine diversification strategy through the ``Chaire REVES'' supported by public and private partners. Social implications \textendash{} At the regional level, industrial-university-territorial partnerships could tackle both societal and economical issues ``with,'' ``for,'' and ``by'' citizens. Originality/value \textendash{} Based on the Living Lab concept, this case study shows a concrete regional university strategy involving: user-centric design, collaborative processes, citizens' workshops, and new financial and organizational answers enabling collaboration between private companies and public institutions. The paper also argues that innovative PPPs involving users are necessary for developing SC.}, - arxiv = {http://dx.doi.org/10.1108/BIJ-10-2012-0068}, - isbn = {0320130088}, - pmid = {42012058}, - file = {/Users/fabio/Zotero/storage/Z8D4MLI8/Innovative Public-Private Partnership to support Smart City- the case of Chaire REVES.pdf} -} - -@inproceedings{Dupont2015a, - title = {The Role of Mock-Ups in the Anticipation of the User Experience within a Living Lab: {{An}} Empirical Study}, - booktitle = {2015 {{IEEE International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}}/ {{International Technology Management Conference}} ({{ICE}}/{{ITMC}})}, - author = {Dupont, Laurent and Guidat, Claudine and Morel, Laure and Skiba, Nathalie}, - year = {2015}, - pages = {1--8}, - publisher = {{IEEE}}, - address = {{Belfast}}, - doi = {10.1109/ICE.2015.7438669}, - abstract = {This paper presents an empirical study focusing on the role of mock-ups to support user/citizens co-creation and the anticipation of the User eXperience within a specific urban Living Lab. Scholars have previously identified different principles characterizing a Living Lab, such as: ``realism'', spontaneity, continuity and empowerment, which represent the ``live'' dimension of Living Labs. However, these principles are quite difficult to practically implement. Nonetheless, we conducted an experiment in the context of an urban project dedicated to the design of mobility stations that reveals the paramount importance of the mock-up role for implementing the ``realism'' principle. The findings unveil the great potential of close-to-real-life immersion of users/citizens in realistic environments to not only fulfilling the ``realism'' principle but also greatly contributing to the adoption by users/citizens. Finally, this study gives some elements to support citizens' engagement in the co-creation stage of the urban design process towards the realization of smart-cities.}, - isbn = {978-1-4673-7156-8}, - keywords = {adoption,immersion,Living Lab,mock-up,smart city,urban project,user experience,user-centered design} -} - -@article{Dupont2015b, - title = {L ' Innovation {{M\'ediation}} Scientifique , Territorialit\'e et D\'eveloppement Local}, - author = {Dupont, Laurent and Morel, Laure and Lhoste, Pascal}, - year = {2015}, - journal = {Actes des Journ\'ees Hubert Curien, session M\'ediation Scientifique, territorialit\'e et d\'eveloppement local, Colloque Science \& You}, - pages = {2--8}, - file = {/Users/fabio/Zotero/storage/JFJ4K6NR/Le Lorraine Fab Living Lab - la 4ème dimension de l’innovation.pdf} -} - -@article{Dupont2016, - title = {Exploring the {{Appropriateness}} of {{Different Immersive Environments}} in the {{Context}} of an {{Innovation Process}} for {{Smart Cities}}}, - author = {Dupont, Laurent and Pallot, Marc and Morel, Laure and Pallot, Marc}, - year = {2016}, - journal = {22nd ICE/IEEE International Technology Management Conference,}, - pages = {13--15}, - abstract = {This paper presents an explorative study dedicated to the evaluation of immersive environments engaging different stakeholders that have to collaborate within an innovation process in the area of smart cities supported by a dedicated Fab Living Lab platform. A previous study has unveiled the great potential of close-to-real-life immersion perceived by users/citizens in realistic environments that not only fulfill the ``realism'' principle of a Living Lab but also greatly contribute to both phenomena of technology acceptance and adoption of the proposed solution. Scholars have previously identified three main factors characterizing an immersive environment: the perceived degree of immersiveness, presence and engagement of users. However, creating close to real-life simulated city environments that provide an appropriate immersiveness, presence and engagement remains a challenge. Furthermore, the traditional working habits of smart cities stakeholders, such as: territorial engineers, town-planners and policy makers, are not prepared for behaving properly in immersive environments. Several experiments were carried out during different events that provided both quantitative and qualitative data through the use of surveys, interviews and observations. For each experiment, several immersive equipment were used. The findings highlight the complementarity between physical and digital technologies supporting co-creation for smart city projects, and the advantage of enabling experts in a field to discover new technologies. Finally, this study provides valuable elements on how to better support close to real-life simulated city environments while providing a higher level of stakeholders' engagement during the ideation of the co-creation stage of the innovation process supported by a Fab Living Lab towards the realization of smart cities.}, - keywords = {1,a previous paper,an,co-creation,design,fab-living-lab,immersive-environment,innovation,open-,presented the outcomes of,user experience,user-centered design,virtual-reality}, - file = {/Users/fabio/Zotero/storage/NKR3X5YM/Exploring the Appropriateness of Different Immersive Environments in the Context of an Innovation Process for Smart Cities.pdf} -} - -@inproceedings{Dupont2017, - ids = {Dupont2018}, - title = {Collaborative Innovation Projects Engaging Open Communities: {{A}} Case Study on Emerging Challenges}, - booktitle = {2017 {{International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}}/{{ITMC}})}, - author = {Dupont, Laurent and Gabriel, Alex and Camargo, Mauricio and Guidat, Claudine}, - year = {2017}, - month = jun, - number = {September}, - pages = {1082--1091}, - publisher = {{IEEE}}, - doi = {10.1109/ICE.2017.8280002}, - isbn = {978-1-5386-0774-9}, - keywords = {co-creation,collaborative innovation,community of practice,open hardware,project management,user-driven innovation}, - file = {/Users/fabio/Zotero/storage/7CMANIG4/Collaborative Innovation Projects Engaging Open Communities- a Case Study on Emerging Challenges.pdf} -} - -@incollection{Dupont2022, - title = {"{{Do-It-Together}}": {{Towards}} the {{Factories}} of the {{Future}}}, - booktitle = {Cosmo-Local Reader}, - author = {Dupont, Laurent and Kasmi, Fedoua and Pearce, Joshua M. and Roland Ortt, J.}, - editor = {Ramos, Jos{\'e} Maria and Bauwens, Michel and Ede, Sharon and Gien Wong, James}, - year = {2021}, - month = oct, - volume = {1}, - pages = {52--59}, - publisher = {{Futures Labs}}, - urldate = {2022-04-19}, - isbn = {978-0-9953546-3-0}, - file = {/Users/fabio/Zotero/storage/VPW7KMFW/full-text.pdf} -} - -@article{dupontUnderstandingUserRepresentations2019, - title = {Understanding User Representations, a New Development Path for Supporting {{Smart City}} Policy: {{Evaluation}} of the Electric Car Use in {{Lorraine Region}}}, - shorttitle = {Understanding User Representations, a New Development Path for Supporting {{Smart City}} Policy}, - author = {Dupont, Laurent and Hubert, Julien and Guidat, Claudine and Camargo, Mauricio}, - year = {2019}, - month = may, - journal = {Technological Forecasting and Social Change}, - series = {Understanding {{Smart Cities}}: {{Innovation}} Ecosystems, Technological Advancements, and Societal Challenges}, - volume = {142}, - pages = {333--346}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2018.10.027}, - urldate = {2023-01-03}, - abstract = {Today electric car and Smart Grid are potential elements of any `Smart City' initiative. According to several recent studies, French citizens are ready to purchase an electric car. Despite of these positive figures, sales of the electric cars are not really taking-off, but slightly increasing. Although, previous studies have identified motivation and barriers for the diffusion of electric cars (EC), we hypothesise, that the analysis of the a priori knowledge of the actors, in particular the users, can be enriched and it will provide a new understanding of the spread of EC. However, there is no studies explaining the types of representations people have of the EC, particularly for non-users, in order to have a better consideration of individuals, not so much as consumers or users, but rather as citizens. Thus, this paper explores the determining factors that determine how social groups perceive the emerging technology of EC and thus provide elements about a potential acceptability enabling its dissemination. In order to achieve this, this paper proposes a new approach based on the use of the AttrakDiff-2 questionnaire, a specific User eXperience (UX) method. This method assesses four different but complementary aspects of the social representation: the possibility of action of the subject on the system; the stimulation, caused, by the system; how the user will identify with the system and, the overall attraction. Data about the social representations of electric car for 131 potential users in the Lorraine Region of France were collected and analysed. Results show that there are differences of user representation regarding the socio-demographic variables. The proposed approach will provide relevant inputs to the infrastructure network design and Smart City policy decision makers.}, - langid = {english}, - keywords = {Attrakdiff-2 tool,Dissemination of innovation,Electric car,French use,Social representation,Users,UX method}, - file = {/Users/fabio/Zotero/storage/JPTMWIK5/Dupont et al_2019_Understanding user representations, a new development path for supporting Smart.pdf;/Users/fabio/Zotero/storage/UIWLVLWH/S0040162518308795.html} -} - -@article{duraiappahEcosystemServicesHuman2011, - title = {Ecosystem Services and Human {{Well-being}}: {{Do}} Global Findings Make Any Sense?}, - author = {Duraiappah, Anantha K.}, - year = {2011}, - month = jan, - journal = {BioScience}, - volume = {61}, - number = {1}, - pages = {7--8}, - issn = {00063568}, - doi = {10.1525/bio.2011.61.1.2}, - urldate = {2021-06-10}, - file = {/Users/fabio/Zotero/storage/KLY46ZLK/full-text.pdf} -} - -@article{duran-romeroBridgingGapCircular2020, - title = {Bridging the Gap between Circular Economy and Climate Change Mitigation Policies through Eco-Innovations and {{Quintuple Helix Model}}}, - author = {{Dur{\'a}n-Romero}, Gemma and L{\'o}pez, Ana M. and Beliaeva, Tatiana and Ferasso, Marcos and Garonne, Christophe and Jones, Paul}, - year = {2020}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {160}, - pages = {120246}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120246}, - urldate = {2020-08-24} -} - -@article{Durmaz2020, - title = {Unified Open Hardware Platform for Digital {{X-ray}} Devices; Its Conceptual Model and First Implementation}, - author = {Durmaz, F. Aytac and Brusan, Altay and Ozturk, Cengizhan}, - year = {2020}, - journal = {IEEE J. Transl. Eng. Heal. Med.}, - volume = {8}, - publisher = {{Institute of Electrical and Electronics Engineers Inc.}}, - issn = {21682372}, - doi = {10.1109/JTEHM.2020.3000011}, - abstract = {Background: Digital radiography devices are still the gold standard for diagnosis or therapy guidance in medicine. Despite the similarities between all direct digital X-ray systems, researchers and new companies face significant challenges during the development phase of innovative X-ray devices; each component is manufactured independently, guidance towards device integration from manufacturers is limited, global standards for device integration is lacking. Method: In scope of this study a plug-integrate-play (PIP) conceptual model for X-ray imaging system is introduced and implemented as an open hardware platform, SyncBox. The researchers are free to select each individual device component from different vendors based on their intended application and target performance are utilized in criteria. Result: As its first implementation, SyncBox and its platform a full body high resolution radiographic scanner that employs a novel TDI digital detector. Conclusion: We believe that SyncBox has a potential for introducing an open source hardware platform to X-ray equipment design.}, - keywords = {Medical imaging,open source hardware,plug-integrate-play (PIP) medical device development,X-ray applications,X-ray imaging hardware} -} - -@article{durzoDesignledRepairReuse2023, - title = {Design-Led Repair \& Reuse: {{An}} Approach for an Equitable, Bottom-up, Innovation-Driven Circular Economy}, - shorttitle = {Design-Led Repair \& Reuse}, - author = {D'Urzo, Marco and Campagnaro, Cristian}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {387}, - pages = {135724}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.135724}, - urldate = {2023-02-09}, - abstract = {The circular economy is a social, technological and economic paradigm that aims to build a production and consumption model focused on waste reduction and maximization of discarded matter recovery. Discussion of the circular economy often treats it as a technocratic and profit-driven phenomenon that can be developed by capital investment in a particular industrial sector without necessarily taking into account the needs of the surrounding geographic area. The promotion of the circular economy often emphasises recycling and other practices that may not fully use the recovered material but are highly automatable, thus creating only a limited number of jobs. At the same time, there is another model of the circular economy, in which small and medium-sized organizations engage in transformative and low-technology activities such as reuse and repair, benefiting local development and creating job opportunities. This model is often explicitly driven by a social development mandate. Still, it risks falling short of its goals because of a lack of expertise and a less systematic approach. This paper aims to introduce the Design-led Repair \& Reuse (DLRR) framework for mitigating the shortcomings of this second model, using an approach that is both sustainable and accessible to organizations with limited resources. Inspired by the principles of ``Design-driven innovation'', ``social \& solidarity economy'', and ``appropriate technology'', DLRR aims to generate a higher quality of processes and products from circular, low entropy and low capital-intensity production activities, resulting in a more solid, identifiable and conscious positioning in the reuse market. It complements the socially inclusive ethos of these third sector small and medium-sized organizations while contributing to the debate on integrating alternative perspectives into the mainstream circular economy discourse. The first part of this paper discusses the theoretical principles that have inspired the DLRR framework. The second part presents research that tests the consistency of these founding principles based on a case study of a sample of organizations in Italy that are active in circular waste transformation processes.}, - langid = {english}, - keywords = {Appropriate technology,Circular economy,Design-driven innovation,Repair,Reuse,Social \& solidarity economy}, - file = {/Users/fabio/Zotero/storage/GFM2P9SB/D'Urzo y Campagnaro - 2023 - Design-led repair & reuse An approach for an equi.pdf;/Users/fabio/Zotero/storage/9DUAZA4P/S0959652622052982.html} -} - -@article{Duty2018, - title = {What Makes a Material Printable? {{A}} Viscoelastic Model for Extrusion-Based {{3D}} Printing of Polymers}, - author = {Duty, Chad and Ajinjeru, Christine and Kishore, Vidya and Compton, Brett and Hmeidat, Nadim and Chen, Xun and Liu, Peng and Hassen, Ahmed Arabi and Lindahl, John and Kunc, Vlastimil}, - year = {2018}, - month = oct, - journal = {Journal of Manufacturing Processes}, - volume = {35}, - pages = {526--537}, - issn = {15266125}, - doi = {10.1016/j.jmapro.2018.08.008}, - abstract = {This article presents a practical model for evaluating polymer feedstock materials as candidates for 3D printing across a variety of extrusion-based platforms. In order for a material to be successfully utilized for 3D printing operations, a series of fundamental conditions must be met. First, pressure-driven extrusion must occur through a given diameter nozzle at a specified flow rate. Second, the extruded material must form and sustain the desired shape. Third, the extruded structure must be able to bridge a specified gap and serve as a mechanically sound foundation for successive deposits. Finally, the deposited structure must be dimensionally stable during the transition to the final state (i.e. fully cured at room temperature). This article presents a framework for extrusion-based printing and a simple viscoelastic model for each of these conditions based on the rheological and thermo-physical properties of the candidate material and the processing parameters of the extrusion-based deposition platform. The model is demonstrated to be a useful tool for the evaluation of example test cases including: high temperature thermoplastics (polyphenylsulfone), fiber reinforced thermoplastics (acrylonitrile butadiene styrene), low-viscosity thermosets (epoxy resins), and thermoplastics with a high coefficient of thermal expansion (polypropylene).}, - keywords = {3D printing,Extrusion,Fused filament fabrication (FFF),Thermoplastic polymers,Viscoelastic model}, - file = {/Users/fabio/Zotero/storage/N3GDUEAR/What makes a material printable A viscoelastic model for extrusion-based 3D printing of polymers.pdf} -} - -@book{Dwivedi2012, - title = {Information {{Systems Theory}}}, - author = {Dwivedi, Yogesh K and Wade, Michael R and Schneberger, Scott L}, - editor = {Dwivedi, Yogesh K. and Wade, Michael R. and Schneberger, Scott L.}, - year = {2012}, - journal = {Springer}, - volume = {28}, - publisher = {{Springer New York}}, - address = {{New York, NY}}, - doi = {10.1007/978-1-4419-6108-2}, - abstract = {Dwivedi, Y.K., Wade, M.R. \{\&\} Schneberger, S.L. (eds) (2012) Informations Systems Theory: Vol.1 \{\&\} Vol. 2, Springer, New York}, - isbn = {978-1-4419-6107-5}, - keywords = {adoption of innovations,diffusion of innovations,organization-environment framework,technology adoption,technology-}, - file = {/Users/fabio/Zotero/storage/GVPZI9MV/The Technology–Organization–Environment Framework.pdf} -} - -@inproceedings{Dyrbus2010, - title = {Investigation on Quality of {{Rapid Prototyping FDM}} Method}, - booktitle = {14th {{International Research}}/{{Expert Conference}}. ''{{Trends}} in the {{Development}} of {{Machinery}} and {{Associated Technology}}''}, - author = {Dyrbus, Grzegorz}, - year = {2010}, - number = {September}, - pages = {629--632}, - address = {{Mediterranean Cruise}}, - keywords = {accuracy,fused deposition modeling,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/5YK55YRH/Dyrbus - 2010 - Investigation on quality of Rapid Prototyping FDM method.pdf} -} - -@article{dzanduDiyLaboratoriesTheir2021, - title = {Diy Laboratories, Their Practices, and Challenges \textendash{} a Systematic Literature Review}, - author = {Dzandu, Michael D. and Pathak, Buddhi}, - year = {2021}, - month = aug, - journal = {https://doi.org/10.1080/09537325.2021.1968373}, - pages = {1--13}, - publisher = {{Routledge}}, - doi = {10.1080/09537325.2021.1968373}, - urldate = {2021-08-24}, - abstract = {The last two decades have seen a growing literature worldwide on do-it-yourself (DiY) laboratories driving informal innovation. However, there is a limited account of the state-of-the-art DiY liter...}, - keywords = {digital innovation,DiY laboratories,Do-it-yourself,innovation diffusion} -} - -@article{Dziallas2018, - title = {Innovation Indicators throughout the Innovation Process: {{An}} Extensive Literature Analysis}, - author = {Dziallas, Marisa and Blind, Knut}, - year = {2018}, - month = jul, - journal = {Technovation}, - issn = {01664972}, - doi = {10.1016/j.technovation.2018.05.005} -} - -@article{Ebadi-Dehaghani2014, - title = {Experimental and Theoretical Analyses of Mechanical Properties of {{PP}}/{{PLA}}/Clay Nanocomposites}, - author = {{Ebadi-Dehaghani}, Hassan and Khonakdar, Hossein Ali and Barikani, Mehdi and Jafari, Seyed Hassan}, - year = {2014}, - journal = {Composites Part B: Engineering}, - volume = {69}, - number = {February 2015}, - pages = {133--144}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2014.09.006}, - abstract = {Compatibilized and non-compatibilized blends of polypropylene (PP) and poly(lactic acid) (PLA) with various compositions containing nanoclay particles were prepared by one step melt compounding in a twin screw extruder. Two nanocomposite systems with different matrices i.e. PP-rich (75/25 composition) containing Cloisite 15A and PLA-rich (25/75 composition) containing Cloisite 30B were selected for investigation of effect of nanoclays and n-butyl acrylate glycidyl methacrylate ethylene terpolymers (PTW) as compatibilizer on mechanical properties of PP/PLA/clay nanocomposites. Tensile and impact properties of the nanocomposite systems were investigated and correlated with their microstructures. Tensile modulus and strength of the blends were increased while elongation at break decreased by increasing PLA content. There was an irregular relationship between impact strength of the blends and PLA content. Several proposed models for blends and nanocomposites were used for prediction of tensile modulus of the samples. Most of the proposed models for blends could predict the tensile modulus of the blends successfully at low content of PLA. Another notable point was that most of the micromechanical models for nanocomposites fitted well to experimental values at low content of the clays and showed deviations at high clay loadings.}, - isbn = {13598368}, - keywords = {A. Nano-structures,B. Interface/interphase,B. Mechanical properties,B. Microstructure}, - file = {/Users/fabio/Zotero/storage/AVKD9B34/Ebadi-Dehaghani et al. - 2014 - Experimental and theoretical analyses of mechanical properties of PPPLAclay nanocomposites.pdf} -} - -@article{ebersbergerInboundOpenInnovation2021, - title = {Inbound {{Open Innovation}} and {{Innovation Performance}}: {{A Robustness Study}}}, - author = {Ebersberger, Bernd and Galia, Fabrice and Laursen, Keld and Salter, Ammon}, - year = {2021}, - month = sep, - journal = {Research Policy}, - volume = {50}, - number = {7}, - pages = {104271}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104271}, - urldate = {2021-05-10}, - file = {/Users/fabio/Zotero/storage/DUQINH28/full-text.pdf} -} - -@article{Ebner2021, - title = {The Challenges of {{Covid-19}} Pandemic on Improving Plastic Waste Recycling Rates}, - author = {Ebner, Norman and Iacovidou, Eleni}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.07.001}, - urldate = {2021-07-08}, - file = {/Users/fabio/Zotero/storage/C9NC74HI/full-text.pdf} -} - -@techreport{EC2018, - title = {A European Strategy for Plastics in a Circular Economy}, - author = {{European Commission}}, - year = {2018}, - month = nov, - journal = {COM (2018)}, - address = {{Brussels}}, - institution = {{European Commission}}, - issn = {0013-936X}, - doi = {10.1021/acs.est.7b02368}, - file = {/Users/fabio/Zotero/storage/SGUQBQ64/m-api-43ca5752-bc25-0811-1e28-845efc05f0d8.pdf} -} - -@incollection{ecClosingLoopEU2015, - title = {Closing the Loop - {{An EU}} Action Plan for the {{Circular Economy COM}}/2015/0614 Final \textemdash{} {{European Environment Agency}}}, - author = {{EC}}, - year = {2015}, - pages = {1--30}, - abstract = {COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT, THE COUNCIL, THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE AND THE COMMITTEE OF THE REGIONS Closing the loop - An EU action plan for the Circular Economy}, - file = {/Users/fabio/Zotero/storage/MRA46LWU/European Commision - 2015 - An EU action plan for the circular economy.pdf} -} - -@article{echegarayWhatPOSTCOVID19Lifestyles2021, - title = {What {{POST-COVID-19}} Lifestyles May Look like? {{Identifying}} Scenarios and Their Implications for Sustainability}, - author = {Echegaray, Fabi{\'a}n}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {567--574}, - publisher = {{Elsevier B.V.}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.01.025}, - urldate = {2021-02-14}, - abstract = {The COVID-19 pandemic has deeply disrupted society\textasciiacute s priorities and individuals' lifestyles with major implications for sustainable development. Economic shutdown and social isolation reduced society's ecological footprint by lowering transportation and industrial activity while prompting families to engage in non-commercialized modes of leisure and social relations. Yet economic recession has intensified problems of under-consumption and poverty, while social isolation has worsened physical and mental illness. The pandemic's short-term effects are visible to everyone experiencing it, yet the global health crisis will also have long-term effects which are presently unknown but whose configurations can be spotted by identifying scenarios based upon individual relations with their material, symbolic and social environments. This perspective article reviews changes in two critical domains of practice: consumption and social relations, based on a theory of scarcity, and proposes an approach to foresee post-COVID-19 scenarios across several areas of social practice. The experience of scarcity in consumption and socializing redefines priorities and values yielding two ideal-types of responses for each domain: the assimilation of reduced levels of material wellbeing and social interactions or the drive for self-indulgence to compensate sacrifices in those areas. Four different lifestyle scenarios are thereby generated based on that analytical framework, enabling the identification of long-term scenarios, beyond the simplistic old normal versus new normal dichotomy. Grounded in available secondary data and relying on the recent Brazilian experience, which can be generalized to other Global South contexts, this proposed framework illustrates distinctive behavioral patterns for each lifestyle across ten areas of practice.}, - keywords = {Brazil,consumption,COVID-19,social isolation,sustainable lifestyles}, - file = {/Users/fabio/Zotero/storage/LN4HN2JN/full-text.pdf} -} - -@article{Eck2013, - title = {{{VOSviewer Manual}}}, - author = {Eck, Nees Jan Van and Waltman, Ludo}, - year = {2013}, - journal = {1 January 2013}, - number = {January}, - eprint = {0803.1716}, - pages = {1--28}, - issn = {01389130}, - doi = {10.3402/jac.v8.30072}, - abstract = {1 January 2013}, - archiveprefix = {arxiv}, - isbn = {0305-1862}, - pmid = {502955140}, - file = {/Users/fabio/Zotero/storage/YYYGI2TI/m-api-358eda28-8480-73e3-4f09-bb11bcfe8f60.pdf} -} - -@article{Ecker2019, - title = {Mechanical Properties and Water Absorption Behaviour of {{PLA}} and {{PLA}}/Wood Composites Prepared by {{3D}} Printing and Injection Moulding}, - author = {Ecker, Josef Valentin and Haider, Andreas and Burzic, Ivana and Huber, Axel and Eder, Gerhard and Hild, Sabine}, - year = {2019}, - month = apr, - journal = {Rapid Prototyping Journal}, - pages = {RPJ-06-2018-0149}, - issn = {1355-2546}, - doi = {10.1108/RPJ-06-2018-0149} -} - -@article{economicsEcologicalEconomicsNext2021, - title = {Ecological Economics : {{The}} next 30 Years}, - author = {Economics, Ecological and Ee, While}, - year = {2021}, - volume = {190}, - number = {September}, - doi = {10.1016/j.ecolecon.2021.107211}, - file = {/Users/fabio/Zotero/storage/2DZ2WN5G/EE.pdf} -} - -@article{edelblutteRenouvellementUrbainQuartiers2006, - title = {{Renouvellement urbain et quartiers industriels anciens : l'exemple du quartier Rives de Meurthe/Meurthe-Canal dans l'agglom\'eration de Nancy}}, - shorttitle = {{Renouvellement urbain et quartiers industriels anciens}}, - author = {Edelblutte, Simon}, - year = {2006}, - month = jun, - journal = {Revue G\'eographique de l'Est}, - volume = {46}, - number = {3-4}, - publisher = {{Association des G\'eographes de l'Est}}, - issn = {0035-3213}, - urldate = {2023-03-02}, - abstract = {A l'heure o\`u plus de 75~\% de la population fran\c{c}aise vit en ville, se pose de plus en plus clairement la question du traitement des espaces urbains en difficult\'e spatialement (friches, d\'eprise\ldots ) ou socialement (d\'elinquance, communautarisme\ldots ). Si les seconds, correspondant le plus souvent aux grands ensembles des ann\'ees 1960, ont la faveur \'evidente des programmes urbains nationaux, les premiers sont le plus souvent trait\'es au niveau local mais ne demandent pas moins d'investissements politique et financier. C'est le cas \`a Nancy, o\`u le quartier industrialo-urbain de Meurthe-Canal, n\'e, en p\'eriph\'erie du centre et \`a la du fin du XIXe~si\`ecle, de la concentration d'activit\'es diverses et d'habitat entre la Meurthe et le canal de la Marne au Rhin, se trouve, \`a la fin du XXe~si\`ecle, enclav\'e dans le tissu urbain et en grande partie en friche. Cette situation m\`ene, \`a partir du milieu des ann\'ees 1990, \`a un ambitieux programme de renouveau urbain encore en cours aujourd'hui et qui, bien plus que de traiter simplement le quartier en question, est aussi une opportunit\'e pour les autorit\'es locales (municipalit\'e et communaut\'e urbaine), de repenser l'organisation spatiale de la ville toute enti\`ere.}, - langid = {french}, - keywords = {France,friches,industrie,Lorraine,Nancy,reconversion industrielle,renouvellement urbain,ville,waterfront}, - file = {/Users/fabio/Zotero/storage/5LUFJYCR/Edelblutte_2006_Renouvellement urbain et quartiers industriels anciens.pdf} -} - -@article{edelmannComputationalSocialScience2020, - title = {Computational {{Social Science}} and {{Sociology}}}, - author = {Edelmann, Achim and Wolff, Tom and Montagne, Danielle and Bail, Christopher A.}, - year = {2020}, - month = jul, - journal = {Annual Review of Sociology}, - volume = {46}, - number = {1}, - publisher = {{Annual Reviews}}, - issn = {0360-0572}, - doi = {10.1146/annurev-soc-121919-054621}, - urldate = {2020-08-09}, - abstract = {The integration of social science with computer science and engineering fields has produced a new area of study: computational social science. This field applies computational methods to novel sources of digital data such as social media, administrative records, and historical archives to develop theories of human behavior. We review the evolution of this field within sociology via bibliometric analysis and in-depth analysis of the following subfields where this new work is appearing most rapidly: ( a) social network analysis and group formation; ( b) collective behavior and political sociology; ( c) the sociology of knowledge; ( d) cultural sociology, social psychology, and emotions; ( e) the production of culture; ( f ) economic sociology and organizations; and ( g) demography and population studies. Our review reveals that sociologists are not only at the center of cutting-edge research that addresses longstanding questions about human behavior but also developing new lines of inquiry about digital spaces as well. We conclude by discussing challenging new obstacles in the field, calling for increased attention to sociological theory, and identifying new areas where computational social science might be further integrated into mainstream sociology.Expected final online publication date for the Annual Review of Sociology, Volume 46 is July 30, 2020. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.}, - keywords = {computational social science,cultural sociology,demography,economic sociology,machine learning,network analysis,political sociology,social psychology,sociology of knowledge,text analysis} -} - -@article{edensEstablishingSEEAEcosystem2022, - title = {Establishing the {{SEEA Ecosystem Accounting}} as a Global Standard}, - author = {Edens, Bram and Maes, Joachim and Hein, Lars and Obst, Carl and Siikamaki, Juha and Schenau, Sjoerd and Javorsek, Marko and Chow, Julian and Chan, Jessica Ying and Steurer, Anton and Alfieri, Alessandra}, - year = {2022}, - month = apr, - journal = {Ecosystem Services}, - volume = {54}, - pages = {101413}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2022.101413}, - urldate = {2022-03-13}, - abstract = {In March 2021, the UN Statistical Commission adopted the System of Environmental-Economic Accounting Ecosystem Accounting. The SEEA EA provides detailed guidance measuring the extent and condition of ecosystems, and how to quantify ecosystem services. This paper presents the SEEA EA in terms of the various types of ecosystem accounts, its origins, purposes and applications. A first handbook was published in 2013 followed by a period of testing. A revision process was launched in 2018 involving a wide range of experts in ecology, environmental economics and statistics. They proposed new or updated classifications for ecosystems and ecosystem condition, a reference list of ecosystem services and improved the internal consistency of the different ecosystem accounts. These proposals were reviewed in two global consultation rounds yielding strong support for a standard approach to ecosystem accounting. Finally, the conceptual framework and the physical accounts (extent, condition and services) are adopted as an international statistical standard. The guidance on monetary accounts (ecosystem services, ecosystem assets, sequence of accounts) is considered as internationally recognised principles and recommendations. Countries are encouraged to develop ecosystem accounts for use in policy and decision-making processes in both public and private sector and contribute to its further methodological development.} -} - -@article{Edwards-Schachter2012, - title = {Fostering {{Quality}} of {{Life}} through {{Social Innovation}}: {{A Living Lab Methodology Study Case}}}, - author = {{Edwards-Schachter}, M{\'o}nica E. and Matti, Cristian E. and Alc{\'a}ntara, Enrique}, - year = {2012}, - journal = {Review of Policy Research}, - volume = {29}, - number = {6}, - pages = {672--692}, - issn = {1541132X}, - doi = {10.1111/j.1541-1338.2012.00588.x}, - abstract = {Participative processes and citizens' empowerment are considered crucial aspects of social innovation (SI), involving collaborative activities between the private, public, and third sectors. This article discusses the principal trends in the literature on the concept of SI, its aims and differential characteristics related to the identification of people's needs, citizen participation processes, and improved quality of life. We present an exploratory case study of SI focusing on the gap between elderly people's needs and the generation of business opportunities, using a living lab (LL) methodology for collaborative placed-based innovation. Our results suggest that LLs are a useful instrument to detect community needs and improve local development and support and integrate technological and social innovations in policies and local governance processes. \textcopyright{} 2012 by The Policy Studies Organization.}, - keywords = {Health and medicine,Living labs,Local governance,People participation,Quality of life,Social innovation}, - file = {/Users/fabio/Zotero/storage/VNQ67V3I/Fostering Quality of Life through Social Innovation A Living Lab Methodology Study Case.pdf} -} - -@article{Edwards-Schachter2018, - title = {The Nature and Variety of Innovation}, - author = {{Edwards-Schachter}, M{\'o}nica}, - year = {2018}, - month = jun, - journal = {International Journal of Innovation Studies}, - volume = {2}, - number = {2}, - pages = {65--79}, - publisher = {{Elsevier}}, - issn = {25892975}, - doi = {10.1016/j.ijis.2018.08.004}, - urldate = {2022-04-19}, - abstract = {What is our current understanding of innovation and how many types of innovation do we know? Broadly, innovation landscapes are characterized by well-established categories, such as product, process, organizational, and marketing innovation, explained and theorized in terms of their links with technological innovation. However global challenges and changes in the structure of knowledge production, have led to diverse innovations, and recognizing and classifying such innovations is more complex, fragmented, and geographically dispersed than ever before. The progressive incorporation of hidden and non-technological innovations, together with the emergence of the fourth industrial revolution, is contributing to change our understanding of innovation and its measurement. This paper provides an overview of the most salient types of innovation in recent decades, enabling both researchers and practitioners to navigate the complex web of innovation definitions and typologies. Innovation studies face the challenge of finding a comprehensive and inclusive definition that captures the significance of innovation, and overcoming the terminological `Babel'ization and increased fragmentation of the field of innovation research.}, - keywords = {Innovation,Innovation types,Knowledge society,Nature of innovation,Social innovation,Technological innovation}, - file = {/Users/fabio/Zotero/storage/XBEDW253/full-text.pdf} -} - -@misc{EffectiveGovernanceCircular, - title = {Effective Governance of Circular Economies: {{An}} International Comparison - {{ScienceDirect}}}, - urldate = {2022-03-13}, - howpublished = {https://www-sciencedirect-com.bases-doc.univ-lorraine.fr/science/article/pii/S0959652622005121?dgcid=rss\_sd\_all} -} - -@book{ehlersEarthSystemScience2006, - title = {Earth System Science in the {{Anthropocene}}}, - editor = {Ehlers, Eckart and Krafft, Thomas}, - year = {2006}, - publisher = {{Springer}}, - address = {{Berlin ; New York}}, - isbn = {978-3-540-26588-7}, - langid = {english}, - lccn = {GE149 .E27 2006}, - keywords = {Effect of human beings on,Global environmental change,Nature}, - file = {/Users/fabio/Zotero/storage/UMLCMLEF/Ehlers y Krafft - 2006 - Earth system science in the Anthropocene.pdf} -} - -@article{Ehrenfeld1997, - title = {Industrial Ecology: {{A}} Framework for Product and Process Design}, - author = {Ehrenfeld, John R.}, - year = {1997}, - journal = {Journal of Cleaner Production}, - volume = {5}, - number = {1-2}, - pages = {87--95}, - issn = {09596526}, - doi = {10.1016/S0959-6526(97)00015-2}, - abstract = {Industrial ecology is a new system for describing and designing sustainable economies. Arising out of an ecological metaphor, it offers guidelines to designers of products and the institutional structures in which production and consumption occur, as well as frameworks for the analysis of complex material and energy flows across economies.}, - keywords = {industrial}, - file = {/Users/fabio/Zotero/storage/EN75QMYZ/Industrial ecology A framework for product and process design.pdf} -} - -@article{Eikelenboom2019, - title = {The Impact of Dynamic Capabilities on the Sustainability Performance of {{SMEs}}}, - author = {Eikelenboom, Manon and {de Jong}, Gjalt}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {1360--1370}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.07.013} -} - -@article{eikelenboomCircularStrategiesSocial2021, - title = {Circular Strategies for Social Housing Associations: {{Lessons}} from a {{Dutch}} Case}, - author = {Eikelenboom, Manon and Long, Thomas B. and {de Jong}, Gjalt}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {292}, - pages = {126024}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126024}, - urldate = {2021-02-14}, - abstract = {The aim of this research is to explore how social housing associations can introduce circular strategies and integrate social elements, next to ecological elements, within these strategies. In order to investigate this aim, this paper first explores the circular strategy options that can be adopted by housing associations. Thereafter, the paper explores how social elements can be integrated within these strategies via the establishment of relationships with communities in the network of housing associations. By performing an in-depth case study, we identified potential circular strategies for housing associations and indicate how community relationships could be established within these strategies. The findings highlight that community relationships in the vision formulation and activities involved in the execution of circular strategies may assist in creating synergies between the ecological aims of circular strategies and the perspectives and needs of communities. On the other hand, the results indicate that not establishing relationships with communities or only establishing relationships in the strategy outcomes may be detrimental to both community needs and the ecological aims of circular strategies.}, - keywords = {Circular strategies,Community relationships,Social elements,Social housing associations}, - file = {/Users/fabio/Zotero/storage/EW2LRXBM/full-text.pdf} -} - -@article{eilersWhyAgileMindset2022, - title = {Why the Agile Mindset Matters}, - author = {Eilers, Karen and Peters, Christoph and Leimeister, Jan Marco}, - year = {2022}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {179}, - pages = {121650}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2022.121650}, - urldate = {2022-04-11} -} - -@article{einhauplConceptualizationSocietalImpacts2021, - title = {The Conceptualization of Societal Impacts of Landfill Mining \textendash{} {{A}} System Dynamics Approach}, - author = {Einh{\"a}upl, Paul and Acker, Karel Van and Peremans, Herbert and Passel, Steven Van}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {296}, - pages = {126351}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126351}, - urldate = {2021-03-08} -} - -@article{Eisenberg2013, - title = {{{3D}} Printing for Children: {{What}} to Build Next?}, - author = {Eisenberg, Michael}, - year = {2013}, - month = jan, - journal = {International Journal of Child-Computer Interaction}, - volume = {1}, - number = {1}, - pages = {7--13}, - publisher = {{Elsevier B.V.}}, - issn = {22128689}, - doi = {10.1016/j.ijcci.2012.08.004}, - abstract = {The era of affordable 3D printing is clearly underway; indeed, the historical patterns of growth in 3D printing are, in many ways, strikingly similar to those associated with the growth of home computing in the late 1970's. One of the prominent areas of increased interest in 3D printing is in the realm of education: fabrication tools are becoming available to college undergraduates and high school students, and even to younger children. Accompanying this burgeoning growth, however, there is an acute need to consider the ways in which 3D printing should develop, as a technology, in order to accommodate the abilities and activities of youngsters. This paper discusses a number of technological challenges to be overcome in making 3D printing truly available to children over the next decade. The most prominent challenges described here include: (a) expanding the range of physical media available for printing, (b)incorporating ideas derived from pick-and-place mechanisms into 3D printing; (c) exploring methods for creating portable and ubiquitous printing devices; (d) creating tools for hand-customization and finishing of tangible printed objects and (e) devising software techniques for specifying; altering; and combining 3D elements in the context of printing. By facing these challenges; we can provide children (and adults) with a remarkably powerful and expressive means for creating all sorts of personalized, artifacts.}, - file = {/Users/fabio/Zotero/storage/Q7BUWPFY/Eisenberg - 2013 - 3D printing for children What to build next.pdf} -} - -@article{ekinciImprovingShapeStability2021, - title = {Improving the Shape Stability and Enhancing the Properties of Layer Dependent Material Extruded Biodegradable Polylactic Acid for Thin Implants}, - author = {Ekinci, Alper and Han, Xiaoxiao and Gleadall, Andrew and Johnson, Andrew Allan}, - year = {2021}, - month = jun, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-05-2020-0108}, - urldate = {2021-06-15}, - keywords = {Annealing,Crystallinity,Layer-dependence,Material extrusion,Molecular weight,Polylactic-acid} -} - -@article{Ekins2003, - title = {A Framework for the Practical Application of the Concepts of Critical Natural Capital and Strong Sustainability}, - author = {Ekins, Paul and Simon, Sandrine and Deutsch, Lisa and Folke, Carl and De Groot, Rudolf}, - year = {2003}, - month = mar, - journal = {Ecological Economics}, - volume = {44}, - number = {2-3}, - pages = {165--185}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/S0921-8009(02)00272-0}, - urldate = {2021-07-08}, - abstract = {This paper develops a methodology for identifying that natural capital - called critical natural capital (CNC) - the maintenance of which is essential for environmental sustainability. By consideration of the characteristics of natural capital, of the environmental functions that these characteristics enable natural capital to perform and of the importance of these functions to humans and the biosphere, it shows how sustainability standards in respect of these environmental functions may be derived. The difference between the current situation and these standards is termed the sustainability gap. The methodology that emerges from bringing these ideas together into a single analytical framework enables policy makers to identify the extent of current unsustainability, the principal causes of it, the elements and processes of natural capital (the CNC) which need to be maintained or restored to close the sustainability gap and the costs of so doing. The framework should therefore be of use in identifying priorities and policies for moving towards environmental sustainability. \textcopyright{} 2002 Published by Elsevier Science B.V.}, - keywords = {Critical natural capital,Environmental functions,Environmental sustainability,Sustainability gap}, - file = {/Users/fabio/Zotero/storage/85SWPF9U/Ekins et al. - Unknown - A framework for the practical application of the concepts of critical natural capital and strong sustainability.pdf} -} - -@article{El-gizawy2011, - title = {Process-Induced {{Properties}} of {{FDM Products}}}, - author = {{El-gizawy}, A Sherif and Corl, Shan and Graybill, Brian}, - year = {2011}, - journal = {University Missouri Columbia}, - keywords = {direct digital manufacturing,evolved properties,fdm,functional products,thermoplastics,ultem 9085}, - file = {/Users/fabio/Zotero/storage/32SFTGEQ/El-gizawy, Corl, Graybill - 2011 - Process-induced Properties of FDM Products.pdf} -} - -@article{elbazFrameworkSustainabilityDrivers2022, - title = {A Framework of Sustainability Drivers and Externalities for {{Industry}} 4.0 Technologies Using the {{Best-Worst Method}}}, - author = {El Baz, Jamal and Tiwari, Sunil and Akenroye, Temidayo and Cherrafi, Anass and Derrouiche, Ridha}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {344}, - pages = {130909}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130909}, - urldate = {2022-03-14} -} - -@misc{ElementsAmeublementDonnees, - title = {{El\'ements d'ameublement : donn\'ees 2019}}, - shorttitle = {{El\'ements d'ameublement}}, - journal = {La librairie ADEME}, - urldate = {2022-07-24}, - abstract = {Rapport annuel de la fili\`ere}, - howpublished = {https://librairie.ademe.fr/dechets-economie-circulaire/4185-elements-d-ameublement-donnees-2019.html}, - langid = {french}, - file = {/Users/fabio/Zotero/storage/8UR3IJ5G/4185-elements-d-ameublement-donnees-2019.html} -} - -@article{Elgie2021, - title = {You Can't Manage What You Can't Measure: {{The}} Potential for Circularity in {{Grenada}}'s Waste Management System}, - author = {Elgie, Allison R. and Singh, Simron Jit and Telesford, John N.}, - year = {2021}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {164}, - pages = {105170}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105170}, - urldate = {2020-10-05}, - file = {/Users/fabio/Zotero/storage/MPWALV9Q/full-text.pdf} -} - -@article{elhorstEvaluatingProposalsInnovation2021, - title = {Evaluating Proposals in Innovation Contests: {{Exploring}} Negative Scoring Spillovers in the Absence of a Strict Evaluation Sequence}, - author = {Elhorst, Paul and Faems, Dries}, - year = {2021}, - month = may, - journal = {Research Policy}, - volume = {50}, - number = {4}, - pages = {104198}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104198}, - urldate = {2021-02-14}, - abstract = {Prior research demonstrated that, when a strict evaluation sequence is present in innovation contests, the score of the previously evaluated proposal negatively influences the scoring of a subsequent proposal. In this paper, we expand our understanding of such negative scoring spillovers by analysing a setting where not only the previously evaluated proposal, but all other proposals within the same meeting can potentially contribute to negative scoring spillovers. We rely on a sample of 561 proposals in 53 publicly funded innovation contests, launched within the scope of four regional innovation programs in the Netherlands. We also introduce an alternative methodological approach with peer effects to adequately model and test the existence of negative scoring spillovers in contests where a strict evaluation sequence is absent. We provide evidence that, in such contests, proposals can mutually influence each other and that the magnitude of these spillovers depends on the design of the innovation contest. We also discuss the implications of these findings for the specific literature on innovation contests and the broader literature on evaluation spillovers in decision-making processes.}, - keywords = {Evaluation spillovers,Funding,Innovation,Peer effects} -} - -@article{Elia2017, - title = {Measuring Circular Economy Strategies through Index Methods: {{A}} Critical Analysis}, - author = {Elia, Valerio and Gnoni, Maria Grazia and Tornese, Fabiana}, - year = {2017}, - journal = {Journal of Cleaner Production}, - volume = {142}, - pages = {2741--2751}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2016.10.196}, - abstract = {In the last years, the circular economy (CE) paradigm is being widely explored by researchers and institutions as a possible path to increase the sustainability of our economic system. Reuse, repair and recycling are becoming crucial activities in many sectors. At the same time, companies are showing an increasing interest for this new economic model. However, the state of the art shows that a deep research on CE assessment and indicators is still lacking, in particular on the micro level. This work tries to fill this gap, first analyzing the current literature on CE assessment, then proposing a reference framework for the monitoring phase of a CE strategy. Finally, the main existing environmental assessment methodologies based on indexes are analyzed according to their suitability to evaluate the circularity of a system. A systematic approach for the choice of the adequate methodology is also provided, highlighting the main critical steps in the assessment of a CE strategy. Further research could be focused either on the extension of this approach to include other assessment methods, and on the validation of this proposal in a case study.}, - isbn = {09596526 (ISSN)}, - keywords = {Assessment,Circular economy,Environmental impact,Index methods,Micro level}, - file = {/Users/fabio/Zotero/storage/HXJK8L4V/Measuring circular economy strategies through index methods A critical analysis.pdf} -} - -@article{Elia2020, - title = {Digital Entrepreneurship Ecosystem: {{How}} Digital Technologies and Collective Intelligence Are Reshaping the Entrepreneurial Process}, - author = {Elia, Gianluca and Margherita, Alessandro and Passiante, Giuseppina}, - year = {2020}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {150}, - pages = {119791}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119791} -} - -@article{Eling1982, - title = {Biodegradable Materials of Poly(l-Lactic Acid): 1. {{Melt-spun}} and Solution-Spun Fibres}, - author = {Eling, B. and Gogolewski, S. and Pennings, A.J.}, - year = {1982}, - month = oct, - journal = {Polymer}, - volume = {23}, - number = {11}, - pages = {1587--1593}, - issn = {00323861}, - doi = {10.1016/0032-3861(82)90176-8}, - urldate = {2014-09-15}, - keywords = {biodegradable materials,crystalline modification,fibres,hot-drawing,mechanical properties,polylactic acid}, - file = {/Users/fabio/Zotero/storage/JGA7H7YM/Eling, Gogolewski, Pennings - 1982 - Biodegradable materials of poly(l-lactic acid) 1. Melt-spun and solution-spun fibres.pdf} -} - -@article{EllenMacArthurFoundation2015, - title = {Growth within: A Circular Economy Vision for a Competitive Europe}, - author = {{Ellen MacArthur Foundation}}, - year = {2015}, - journal = {Ellen MacArthur Foundation}, - pages = {100}, - issn = {00178012}, - doi = {Article}, - abstract = {The circular economy is gaining increasing attention in Europe and around the world as a potential way for our society to increase prosperity, while reducing dependence on primary materials and energy. The European Commission is expected to propose a ``circular economy package'' by the end of 2015, and many business leaders embrace the circular economy as a path to increasing growth and profitability. At the same time, a lively debate is going on about the attractiveness of a circular economy for different stakeholders and its implications for employment, growth, and the environment. This report aims to contribute to a fact base to inform this debate, especially in Europe. The report suggests what a circular European economy could look like and compares its potential impact with the current development path. The report models potential European economic and environmental outcomes in both scenarios. It also examines how a more circular way of satisfying human needs could play out in three of the largest and most resource-intensive European value chains: mobility, food, and the built environment. In aggregate, the circular scenarios suggest that the opportunity for Europe's economy could be large. The report does not aim to provide final answers or projections for a circular economy\textemdash this would be impossible given the major uncertainties involved in the transition. Rather, the report tries to identify and describe major differences that circularity could bring to the European economy and offers directional quantification of the most important differences. In doing so, the report builds on previous circular economy research, including work by the Ellen MacArthur Foundation and the McKinsey Center for Business and Environment. This report is the product of a knowledge partnership between the Ellen MacArthur Foundation, Stiftungsfonds f\"ur Umwelt\"okonomie und Nachhaltigkeit (SUN),the new environmental economics branch of the Deutsche Post Foundation, and the McKinsey Center for Business and Environment. We encourage policy-makers inspired by the vision presented in this report to read the Ellen MacArthur Foundation's new and complementary report, Delivering the circular economy: A toolkit for policy-makers. The toolkit offers an actionable, step-by-step methodology to help transition towards a circular economy. We are grateful to our numerous partners and advisors for their insights and support throughout this project, as acknowledged in the pages that follow. This report has truly been a collaborative effort by business, policy-makers, and academia. We hope you find this report informative and useful. We invite you to engage with us on this timely opportunity.}, - arxiv = {00475394}, - isbn = {00178012}, - pmid = {803973233}, - file = {/Users/fabio/Zotero/storage/47UYGRY8/Ellen MacArthur Foundation - 2015 - Growth within a circular economy vision for a competitive europe.pdf} -} - -@article{ellisLandUseEcological2021, - title = {Land {{Use}} and {{Ecological Change}}: {{A}} 12,000-{{Year History}}}, - author = {Ellis, Erle C.}, - year = {2021}, - month = oct, - journal = {https://doi.org/10.1146/annurev-environ-012220-010822}, - volume = {46}, - number = {1}, - pages = {1--33}, - publisher = {{Annual Reviews}}, - doi = {10.1146/ANNUREV-ENVIRON-012220-010822}, - urldate = {2021-11-06}, - abstract = {Human use of land has been transforming Earth's ecology for millennia. From hunting and foraging to burning the land to farming to industrial agriculture, increasingly intensive human use of land h...}, - keywords = {anthromes,conservation,deforestation,human-dominated ecosystems,land system science,social-ecological systems} -} - -@article{elmassahEngenderingSustainableDevelopment2020, - title = {Engendering Sustainable Development Competencies in Higher Education: {{The}} Case of {{Egypt}}}, - author = {Elmassah, Suzanna and Biltagy, Marwa and Gamal, Doaa}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {266}, - pages = {121959}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121959}, - urldate = {2020-05-27}, - abstract = {Higher Education Institutions are a crucial player in achieving the international 2030 sustainable development agenda on the national levels. This study examines the role that Cairo University plays in promoting sustainable development competencies (a vital goal identified by the United Nations) through its formal and non-formal educational practices. This investigation represents the initial empirical effort that explores the promotion of sustainable development competencies in the Middle East. Specifically, it contributes to the literature by investigating factors that affect sustainable development competencies and by utilizing a Middle Eastern context. Finding reveals that there is a significant difference in the level of sustainable development competencies between students in different majors and colleges.}, - keywords = {Competencies,Developing countries,Education for sustainable development,Higher education,SDGs,Students,Sustainable development} -} - -@article{Elverum2016, - title = {Prototyping in {{New Product Development}}: {{Strategy Considerations}}}, - author = {Elverum, Christer W. and Welo, Torgeir and Tronvoll, Sigmund}, - year = {2016}, - month = jan, - journal = {Procedia CIRP}, - volume = {50}, - pages = {117--122}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2016.05.010}, - urldate = {2021-02-16}, - abstract = {Prototyping is an important activity in most new product development processes. Whether the aim is to explore new opportunities or refine existing solutions, prototyping can be a valuable tool. This paper takes a look at the diversity of prototyping practices and the contextual factors that may have an impact on the prototyping strategy. Through existing literature and industrial as well as academic case studies, several prevailing contextual factors are identified and used as a basis to propose guidelines to aid practitioners in making important decisions when formulating a prototyping strategy.}, - keywords = {engineering design,new product development,product systems,prototypes,prototyping}, - file = {/Users/fabio/Zotero/storage/SHB87MDA/full-text.pdf} -} - -@inproceedings{elverumRoleEarlyPrototypes2014, - title = {The Role of Early Prototypes in Concept Development: {{Insights}} from the Automotive Industry}, - booktitle = {Procedia {{CIRP}}}, - author = {Elverum, Christer W. and Welo, Torgeir}, - year = {2014}, - volume = {21}, - pages = {491--496}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2014.03.127}, - urldate = {2021-02-16}, - abstract = {The early phases of new product development have become an area of increasing research interest during the past decades. The vast majority of researchers agree that the potential for the most substantial impact on the innovation outcome lies in the execution of the early phases. In this paper, the early phases of the new product development process in seven automotive OEMs is studied. The present work discusses in general terms the findings from the sample of companies, as well as two in-depth reviews of recent product innovations launched by one of the OEMs; using semi-structured interviews. In these case studies, prototypes were identified to play a particularly important role with regard to: 1) enabling the team to explore various concepts and reduce (mainly) technical uncertainty, 2) communicating and gaining (financial) support from internal decision makers and 3) providing detailed characteristics in order to gain a deeper understanding of the product requirements. Based on these findings, it is concluded that the role of prototypes as enabling tools for innovation outcomes is just as important in the early product development phases as in the more commonly explored late phases.}, - keywords = {Fuzzy front end,New product development,Physical prototypes,Product engineering,Robust design}, - file = {/Users/fabio/Zotero/storage/BYDBWNCC/full-text.pdf} -} - -@article{Elzinga2020, - title = {Consumer Acceptance of Circular Business Models}, - author = {Elzinga, Remi and Reike, Denise and Negro, Simona O. and Boon, Wouter P.C.}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {254}, - pages = {119988}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.119988} -} - -@article{EmreYildiz2020, - title = {Individual and Contextual Determinants of Innovation Performance: {{A}} Micro-Foundations Perspective}, - author = {Emre Yildiz, H. and Murtic, Adis and Klofsten, Magnus and Zander, Udo and Richtn{\'e}r, Anders}, - year = {2020}, - month = apr, - journal = {Technovation}, - pages = {102130}, - publisher = {{Elsevier Ltd}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2020.102130}, - urldate = {2020-05-08}, - abstract = {Concurrent increase in the degree of competition and access to information makes it both a challenge and necessity for firms to develop their ability to sense, seize and exploit knowledge-based advantages. Since absorptive capacity reflects an organization's ability to extract innovative ideas from its environment, it plays a critical role in fostering intrapreneurship and innovative performance within existing firms. In this paper, we adopt micro-foundations perspective and study how goal orientations of employees affect their individual-level absorptive capacity, which would in turn shape collective innovative performance. Furthermore, we examine conditions under which individuals' absorptive capacities can efficiently aggregate and leads to increased collective innovation performance. We tested our theoretical model using an original dataset collected from 648 knowledge workers from 126 functional areas. Our analysis show that individuals' learning and prove orientation are important predictors of their absorptive capacity, and that individuals' aggregate absorptive capacity would lead to positive innovation outcomes especially when their activities are highly coordinated.}, - keywords = {Absorptive capacity,Goal orientation,Innovative performance,Team-level coordination} -} - -@article{EnergyTransitionClimate, - title = {Energy {{Transition}}: {{Climate Action}} and {{Circularity}}}, - shorttitle = {Energy {{Transition}}}, - journal = {ACS Symposium Series}, - urldate = {2022-09-01}, - abstract = {Industrial manufacturing of materials may achieve, not only increased profit, but also reduced waste generation, energy consumption, and global greenhouse gas emissions through additive manufacturing (AM). This chapter puts into perspectives the ideas and benefits of using 3D printing technology in the manufacture of durable and sustainable materials, enabling high-value reuse toward the promotion of a better cyclic economy.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/HLWU9GCW/bk-2022-1412.html} -} - -@article{Engstrom1992, - title = {The Recycling of Plastic Bottles Collected from Public Waste}, - author = {Engstrom, Keith}, - year = {1992}, - month = sep, - journal = {Endeavour}, - volume = {16}, - number = {3}, - pages = {117--121}, - issn = {01609327}, - doi = {10.1016/0160-9327(92)90069-2}, - file = {/Users/fabio/Zotero/storage/LY3TMY88/Engstrom - 1992 - The recycling of plastic bottles collected from public waste.pdf} -} - -@phdthesis{Enjolras2017, - title = {M\'ethodologie d'analyse de La Capacit\'e \`a Innover et \`a Exporter Des \{\vphantom\}{{PME}}\vphantom\{\} Manufacturi\`eres et de Proc\'ed\'es : \{\vphantom\}{{Identification}}\vphantom\{\} et Caract\'erisation d'un Espace Commun En Vue de l'\'elaboration d'un Outil Multicrit\`eres d'aide \`a La D\'ecision}, - author = {Enjolras, Manon}, - year = {2016}, - file = {/Users/fabio/Zotero/storage/XPATUTYU/Manon.pdf} -} - -@misc{EntropyLawSustainability, - title = {Entropy {{Law}}, {{Sustainability}}, and {{Third Industrial Revolution}}, {{R}}. {{Sengupta}}, {{Oxford University Press}}, {{Oxford}}, {{UK}} (4 {{August}} 2020), 10.1093/Oso/9780190121143.001.0001 - {{ScienceDirect}}}, - urldate = {2021-08-22}, - howpublished = {https://www-sciencedirect-com.bases-doc.univ-lorraine.fr/science/article/pii/S0921800921002172?dgcid=rss\_sd\_all} -} - -@misc{EnvironmentalDimensionsAdditive, - title = {Environmental {{Dimensions}} of {{Additive Manufacturing}}: {{Mapping Application Domains}} and {{Their Environmental Implications}} - {{Kellens}} - 2017 - {{Journal}} of {{Industrial Ecology}} - {{Wiley Online Library}}}, - urldate = {2022-09-13}, - howpublished = {https://onlinelibrary-wiley-com.bases-doc.univ-lorraine.fr/doi/10.1111/jiec.12629}, - file = {/Users/fabio/Zotero/storage/JVHWL84Z/jiec.html} -} - -@article{enyoghasiIndustrySustainableManufacturing2021, - title = {Industry 4.0 for Sustainable Manufacturing: {{Opportunities}} at the Product, Process, and System Levels}, - author = {Enyoghasi, Christian and Badurdeen, Fazleena}, - year = {2021}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {166}, - pages = {105362}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105362}, - urldate = {2021-01-01} -} - -@article{eppsSustainabilitySyntheticPlastics2022, - title = {Sustainability of {{Synthetic Plastics}}: {{Considerations}} in {{Materials Life-Cycle Management}}}, - shorttitle = {Sustainability of {{Synthetic Plastics}}}, - author = {Epps, Thomas H. III and Korley, LaShanda T. J. and Yan, Tianwei and Beers, Kathryn L. and Burt, Tiffani M.}, - year = {2022}, - month = jan, - journal = {JACS Au}, - volume = {2}, - number = {1}, - pages = {3--11}, - publisher = {{American Chemical Society}}, - doi = {10.1021/jacsau.1c00191}, - urldate = {2023-08-21}, - abstract = {The sustainability of current and future plastic materials is a major focus of basic research, industry, government, and society at large. There is a general recognition of the positive impacts of plastics, especially packaging; however, the negative consequences around end-of-life outcomes and overall materials circularity are issues that must be addressed. In this perspective, we highlight some of the challenges associated with the many uses of plastic components and the diversity of materials needed to satisfy consumer demand, with several examples focused on plastics packaging. We also discuss the opportunities provided by conventional and advanced recycling/upgrading routes to petrochemical and bio-based materials and feedstocks, along with overviews of chemistry-related (experimental, computational, data science, and materials traceability) approaches to the valorization of polymers toward a closed-loop environment.} -} - -@techreport{Epstein, - title = {Why {{Models}}?}, - author = {Epstein, Joshua M}, - file = {/Users/fabio/Zotero/storage/2IFSAUY6/1 - Introduction - Why Model.pdf} -} - -@article{Eremina2019, - title = {Digital {{Maturity}} and {{Corporate Performance}}: {{The Case}} of the {{Baltic States}}}, - author = {Eremina, Yulia and Lace, Natalja and Bistrova, Julija}, - year = {2019}, - month = aug, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {3}, - pages = {54}, - issn = {2199-8531}, - doi = {10.3390/joitmc5030054}, - abstract = {Enterprise digitalization is a way for companies to make their processes more efficient, to enhance their marketing strategies, and improve their competitive moat within the global competitive landscape. To see how fast Baltic companies are adapting to digitalization trend and, therefore, how good they are at keeping or improving their competitive advantage, we have developed a digital maturity assessment methodology, which was applied to the listed enterprises in Estonia, Latvia, and Lithuania. This methodology allowed us to detect certain digital maturity trends, such as the significant growth of the attention paid towards concepts related to `process automation'. Further, it was clear that many companies are concerned with online business, which can be well-seen from the analyzed annual reports. Additionally, we have compared the level and dynamics of the company's digital maturity to its financial and market performance. We have concluded that, although there is a positive relationship between several financial indicators (e.g., sales growth), it is too early to see the positive effect of digital maturity on a company's stock performance.} -} - -@article{Eriksen2018, - title = {Contamination in Plastic Recycling: {{Influence}} of Metals on the Quality of Reprocessed Plastic}, - author = {Eriksen, M.K. and Pivnenko, K. and Olsson, M.E. and Astrup, T.F.}, - year = {2018}, - month = sep, - journal = {Waste Management}, - volume = {79}, - pages = {595--606}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2018.08.007} -} - -@article{Eriksen2018a, - title = {Quality {{Assessment}} and {{Circularity Potential}} of {{Recovery Systems}} for {{Household Plastic Waste}}}, - author = {Eriksen, Marie Kampmann and Damgaard, Anders and Boldrin, Alessio and Astrup, Thomas Fruergaard}, - year = {2018}, - month = nov, - journal = {Journal of Industrial Ecology}, - issn = {10881980}, - doi = {10.1111/jiec.12822} -} - -@article{Eriksen2019, - title = {Closing the Loop for {{PET}}, {{PE}} and {{PP}} Waste from Households: {{Influence}} of Material Properties and Product Design for Plastic Recycling}, - author = {Eriksen, M. K. and Christiansen, J. D. and Daugaard, A. E. and Astrup, T. F.}, - year = {2019}, - month = aug, - journal = {Waste Management}, - volume = {96}, - pages = {75--85}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2019.07.005}, - urldate = {2020-04-08}, - abstract = {Recycling of plastic is an important step towards circular economy. However, plastic from household waste (HHW) is a heterogeneous and contaminated resource, leading to recycled plastic with reduced quality, limiting the potential for closed-loop recycling. In addition to regulatory requirements for the chemical composition of recycled plastic, reduced physical and mechanical properties may limit the potential for closed-loop recycling. Consequently, this study analyses the thermal degradation, processability and mechanical properties of a range of reprocessed PET, PE and PP samples from source-separated plastic in HHW. On this basis, the potential for closed-loop recycling is evaluated. The study demonstrated that PET, PE and PP recycling represent different challenges. Potential degradation of the PET polymer can be reversed in a decontamination process, making PET waste well-suited for closed-loop, multiple times recycling, even when the degree of heterogeneity in the waste is high. The processability of different kinds of PE and PP packaging types varied considerably, especially for PP. Consequently, current recycling of mixed PP waste and even separate recycling of individual PP waste packaging types, will not technically facilitate recycling into new packaging products. This highlights the importance of PE and PP waste homogeneity when sent to reprocessing. Such homogeneity may be achieved through additional plastic sorting and regulatory harmonisation of product design, accounting for polymer properties and recyclability. Degradation of PP during recycling was shown to be substantial, representing another important limitation for PP recycling, necessary to address in the future.}, - keywords = {Circular economy,Material quality,Mechanical properties,Melt flow index (MFI),Plastic recycling,Recyclability}, - file = {/Users/fabio/Zotero/storage/2N7CY7VX/Closing the loop for PET, PE and PP waste from households- Influence of material properties and product design for plastic recycling.pdf} -} - -@article{Eriksson2005b, - title = {State-of-the-Art in Utilizing {{Living Labs}} Approach to User-Centric {{ICT}} Innovation: A {{European}} Approach}, - author = {Eriksson, Mats and Niitamo, Veli-Pekka and Kulkki, Seija}, - year = {2005}, - journal = {Centre for Distance-spanning Technology (CDT) at Lulea University of Technology, Sweden.} -} - -@article{Eriksson2019, - title = {A Revised Perspective on Innovation Policy for Renewal of Mature Economies \textendash{} {{Historical}} Evidence from Finance and Telecommunications in {{Sweden}} 1980\textendash 1990}, - author = {Eriksson, Klas and Ernkvist, Mirko and Laurell, Christofer and Moodysson, Jerker and Nykvist, Rasmus and Sandstr{\"o}m, Christian}, - year = {2019}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {147}, - pages = {152--162}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.07.001}, - urldate = {2020-05-21}, - abstract = {What is the role of innovation policy for accomplishing renewal of mature industries in Western economies? Drawing upon an unusually rich dataset spanning 9752 digitized archival documents, we categorize and code decisions taken by policymakers on several levels while also mapping and quantifying the strategic activities of both entrant firms and incumbent monopolists over a decade. Our data concerns two empirical cases from Sweden during the time period 1980\textendash 1990: the financial sector and the telecommunications sector. In both industries, a combination of technological and institutional upheaval came into motion during this time period which in turn fueled the revitalization of the Swedish economy in the subsequent decades. Our findings show that Swedish policymakers in both cases consistently acted in order to promote the emergence of more competition and de novo entrant firms at the expense of established monopolies. The paper quantifies and documents this process while also highlighting several enabling conditions. In conclusion, the results indicate that successful innovation policy in mature economies is largely a matter of strategically dealing with resourceful vested interest groups, alignment of expectations, and removing resistance to industrial renewal.}, - file = {/Users/fabio/Zotero/storage/EUCSJPNS/full-text.pdf} -} - -@article{Erkal2014, - title = {{{3D}} Printed Microfluidic Devices with Integrated Versatile and Reusable Electrodes}, - author = {Erkal, Jayda L. and Selimovic, Asmira and Gross, Bethany C. and Lockwood, Sarah Y. and Walton, Eric L. and McNamara, Stephen and Martin, R. Scott and Spence, Dana M.}, - year = {2014}, - journal = {Lab Chip}, - volume = {14}, - number = {12}, - pages = {2023--2032}, - issn = {1473-0197}, - doi = {10.1039/C4LC00171K}, - abstract = {{$<$}p{$>$}We present two 3D printed fluidic devices capable of 1) flow-based electrochemical determination of dopamine and nitric oxide and 2) electrochemical measurement of oxygen while simultaneously collecting secreted molecules from red blood cells exposed to varying oxygen tensions.{$<$}/p{$>$}}, - arxiv = {15334406}, - isbn = {1473-0197}, - pmid = {24763966} -} - -@article{Erro-Garces2019, - title = {Do Better Workplace Environmental Conditions Improve Job Satisfaction?}, - author = {{Erro-Garc{\'e}s}, Amaya and Ferreira, Susana}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {219}, - pages = {936--948}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.138} -} - -@article{Ertz2019, - title = {Made to Break? {{A}} Taxonomy of Business Models on Product Lifetime Extension}, - author = {Ertz, Myriam and {Leblanc-Proulx}, S{\'e}bastien and Sarig{\"o}ll{\"u}, Emine and Morin, Vincent}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {234}, - pages = {867--880}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.264}, - urldate = {2020-03-22}, - abstract = {This paper contributes to the establishment of product lifetime extension (PLE) as a field of study through development of a framework of product lifetime extension business models (PLEBM), and offering of a taxonomy of PLEBM. The proposed taxonomy of PLEBM draws systematically on characteristics of 150 organizations which are identified in the scholarly and managerial literature as engaging in PLE. By considering the full spectrum of PLE practices systematically, we delineate these organizations on seven dimensions (i.e., key activities, key partners, channels, customer segments, customer relationships, offering, and revenue streaming) with 30 corresponding literature-based features. A clustering procedure, with key activities and key partners as input variables, revealed seven mutually exclusive PLEBMs: Relational product-as-a-service, Brick\&digital product nurturers, Quality product designers, Secondhand vendors, Marketer-managed access systems, and P2P access brokers. Overall, product nature improvement through design is found less prevalent than product nurture strategies, such as maintenance (maintenance/advice/training/consulting), recovery (remanufacturing and repair), redistribution and access schemes. This study also presents a state-of-the-art overview on how organizations and consumers extend (pro-)actively product lifetimes.}, - keywords = {Business model,Cluster analysis,Consumer,Nature-nurture,Product lifetime extension,Taxonomy} -} - -@article{Es-Said2000, - title = {Effect of {{Layer Orientation}} on {{Mechanical Properties}} of {{Rapid Prototyped Samples}}}, - author = {{Es-Said}, O. S. and Foyos, J. and Noorani, R. and Mendelson, M. and Marloth, R. and a. Pregger, B.}, - year = {2000}, - month = jan, - journal = {Materials and Manufacturing Processes}, - volume = {15}, - number = {1}, - pages = {107--122}, - issn = {1042-6914}, - doi = {10.1080/10426910008912976}, - urldate = {2014-08-17}, - file = {/Users/fabio/Zotero/storage/RKT5J6EC/Es-Said et al. - 2000 - Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples.pdf} -} - -@article{esashikaInvestigationElusiveConcept2020, - title = {An Investigation into the Elusive Concept of Smart Cities: A Systematic Review and Meta-Synthesis}, - author = {Esashika, Daniel and Masiero, Gilmar and Mauger, Yohann}, - year = {2020}, - month = dec, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--13}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2020.1856804}, - urldate = {2020-12-14}, - abstract = {Despite almost two decades of research, authors have disagreed about the concept of smart cities. In this article, we provide a systematic review and a meta-synthesis analysis of smart cities. We find a convergence in the literature on the following primary characteristics of smart cities: (a) advanced ICT Technology, (b) sustainability, (c) innovative and high-skilled society, (d) high-tech governance and citizen participation, and (e) knowledge-based economy. Based on these findings, we suggest a new notion: A smart city engenders an innovative and qualified society, oriented towards the development of the knowledge economy, which makes advanced ICT technologies aimed at promoting sustainability and participatory urban governance. Our study robustly offers an understanding of smart cities and presents a creative perception encompassing these five principal characteristics worthy of further investigation. ARTICLE HISTORY}, - keywords = {meta-synthesis,Smart city,systematic review}, - file = {/Users/fabio/Zotero/storage/GGBIYHKU/full-text.pdf} -} - -@article{escarioInfluenceEnvironmentalAttitudes2020, - title = {The Influence of Environmental Attitudes and Perceived Effectiveness on Recycling, Reducing, and Reusing Packaging Materials in {{Spain}}}, - author = {Escario, Jos{\'e}-Juli{\'a}n and {Rodriguez-Sanchez}, Carla and Casal{\'o}, Luis V.}, - year = {2020}, - month = jul, - journal = {Waste Management}, - volume = {113}, - pages = {251--260}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.05.043}, - urldate = {2020-06-18} -} - -@article{escobarMetricsSustainabilityRegionspecific2021, - title = {Metrics on the Sustainability of Region-Specific Bioplastics Production, Considering Global Land Use Change Effects}, - author = {Escobar, Neus and Britz, Wolfgang}, - year = {2021}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {167}, - pages = {105345}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105345}, - urldate = {2021-02-14}, - file = {/Users/fabio/Zotero/storage/UNL6VSQL/full-text.pdf} -} - -@article{esfeldOpenSocietyClosed2022, - title = {From the Open Society to the Closed Society: {{Reconsidering Popper}} on Natural and Social Science}, - author = {Esfeld, Michael}, - year = {2022}, - month = mar, - journal = {Futures}, - volume = {137}, - pages = {102920}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2022.102920}, - urldate = {2022-03-13} -} - -@book{Eskelinen2015, - title = {Citizen-{{Driven Innovation}}: {{A}} Guidebook for City Mayors and Public Administrators}, - author = {Eskelinen, Jarmo and Lindy, Ilari and Marsh, Jesse and {Muente-kunigami}, Arturo}, - editor = {Eskelinen, Jarmo and Robles, Ana Garc{\'i}a and Lindy, Ilari and Marsh, Jesse and {Muente-Kunigami}, Arturo}, - year = {2015}, - publisher = {{World Bank, Washington, DC, and European Network of Living Labs. \textcopyright World Bank and ENoLL.}} -} - -@article{Espalin2014, - title = {{{3D Printing}} Multifunctionality: {{Structures}} with Electronics}, - author = {Espalin, David and Muse, Danny W. and MacDonald, Eric and Wicker, Ryan B.}, - year = {2014}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {72}, - number = {5-8}, - pages = {963--978}, - issn = {14333015}, - doi = {10.1007/s00170-014-5717-7}, - abstract = {While NASA explores the power of 3D printing in the development of the next generation space exploration vehicle, a CubeSat Trailblazer was launched in November 2013 that integrated 3D-printed structures with embedded electronics. Space provides a harsh environment necessary to demonstrate the durability of 3D-printed devices with radiation, extreme thermal cycling, and low pressure - all assaulting the structure at the atomic to macroscales. Consequently, devices that are operational in orbit can be relied upon in many terrestrial environments - including many defense and biomedical applications. The 3D-printed CubeSat module (a subsystem occupying approximately 10 \% of the total volume offered by the 10{$\in\times\in$}10{$\in\times\in$}10-cm CubeSat enclosure) has a substrate that fits specifically into the available volume - exploiting 3D printing to provide volumetric efficiency. Based on the best fabrication technology at the time for 3D-printed electronics, stereolithography (SL), a vat photopolymerization technology, was used to fabricate the dielectric structure, while conductive inks were dispensed in channels to provide the electrical interconnect between components. In spite of the structure passing qualification - including temperature cycling, shock and vibration, and outgas testing - the photocurable materials used in SL do not provide the level of durability required for long-term functionality. Moreover, the conductive inks with low-temperature curing capabilities as required by the SL substrate material are widely known to provide suboptimal performance in terms of conductivity. To address these challenges in future 3D-printed electronics, a next generation machine is under development and being referred to as the multi3D system, which denotes the use of multiple technologies to produce 3D, multi-material, multifunctional devices. Based on an extrusion process necessary to replace photocurable polymers with thermoplastics, a material extrusion system based on fused deposition modeling (FDM) technology has been developed that integrates other technologies to compensate for FDM's deficiencies in surface finish, minimum dimensional feature size, and porosity. Additionally, to minimize the use of conductive inks, a novel thermal embedding technology submerges copper wires into the thermoplastic dielectric structures during FDM process interruptions - providing high performance, robust interconnect, and ground planes - and serendipitously improving the mechanical properties of the structure. This paper compares and contrasts stereolithography used for 3D-printed electronics with the FDM-based system through experimental results and demonstrates an automated FDM-based process for producing features not achievable with FDM alone. In addition to the possibility of using direct write for electronic circuitry, the novel fabrication uses thermoplastics and copper wires that offer a substantial improvement in terms of performance and durability of 3D-printed electronics. \textcopyright{} 2014 Springer-Verlag London.}, - isbn = {0017001457177}, - pmid = {2}, - keywords = {3D Printing,3D Structural electronics,Additive manufacturing,Conductive inks,Embedded components,Embedded wires,Laser microwelding,Satellites,Ultrasonic embedding} -} - -@article{EspinozaPerez2017c, - title = {Key Challenges and Requirements for Sustainable and Industrialized Biorefinery Supply Chain Design and Management: {{A}} Bibliographic Analysis}, - author = {Espinoza P{\'e}rez, Andrea Teresa and Camargo, Mauricio and Narv{\'a}ez Rinc{\'o}n, Paulo C{\'e}sar and Alfaro Marchant, Miguel}, - year = {2017}, - journal = {Renewable and Sustainable Energy Reviews}, - volume = {69}, - number = {September 2016}, - pages = {350--359}, - publisher = {{Elsevier}}, - issn = {18790690}, - doi = {10.1016/j.rser.2016.11.084}, - abstract = {The growing global population and its effects on world food security, as well as the urgency for climate change mitigation, are issues that foster technological, social, and political innovations to increase the efficiency of use of natural resources, such as biomass among others. While significant research efforts have been devoted to biomass conversion processes, their associated supply chains and their implication for complete process efficiency have only been studied more recently. However, most of the recent investigations into the design and optimization of biomass supply chains have focused on an economic point of view, sidelining other dimensions of sustainability, which represents a serious drawback for this kind of work. This article surveys the recent research on design and management optimization of biorefinery supply chains from a sustainability perspective. 72 published research articles from 2006 to 2015 have been analyzed to highlight the sustainability dimensions considered, as well as the inclusion of uncertainties. A typology of decision-making at three levels of analysis (strategic, tactical and operational), and the specific set of tools used to model and optimize the biorefinery supply chain have also been studied. The conclusion underlines the contributions and shortcomings of current research and suggests possible future directions.}, - keywords = {Biorefinery,Decision-making levels,Supply chain,Sustainability dimensions}, - file = {/Users/fabio/Zotero/storage/EQI4N68C/Key challenges and requirements for sustainable and industrialized biorefinery supply chain design and management A bibliographic analys.pdf} -} - -@book{Etzkowitz2008, - title = {The Triple Helix: {{University-industry-government}} Innovation in Action}, - author = {Etzkowitz, Henry}, - year = {2008}, - journal = {The Triple Helix: University-Industry-Government Innovation in Action}, - doi = {10.4324/9780203929605}, - urldate = {2022-04-19}, - abstract = {A Triple Helix of university-industry-government interactions is the key to innovation in increasingly knowledge-based societies. As the creation, dissemination, and utilization of knowledge moves from the periphery to the center of industrial production and governance, the concept of innovation, in product and process, is itself being transformed. In its place is a new sense of 'innovation in innovation' - the restructuring and enhancement of the organizational arrangements and incentives that foster innovation. This triple helix intersection of relatively independent institutional spheres generates hybrid organizations such as technology transfer offices in universities, firms, and government research labs and business and financial support institutions such as angel networks and venture capital for new technology-based firms that are increasingly developing around the world. The Triple Helix describes this new innovation model and assists students, researchers, and policymakers in addressing such questions as: How do we enhance the role of universities in regional economic and social development? How can governments, at all levels, encourage citizens to take an active role in promoting innovation in innovation and, conversely, how can citizens so encourage their governments? How can firms collaborate with each other and with universities and government to become more innovative? What are the key elements and challenges to reaching these goals?}, - isbn = {0-203-92960-8}, - file = {/Users/fabio/Zotero/storage/FX2W94IL/full-text.pdf} -} - -@article{etzkowitzLicensingLifeEvolution2021, - title = {Licensing Life: {{The}} Evolution of {{Stanford}} University's Technology Transfer Practice}, - author = {Etzkowitz, Henry and Zhou, Chunyan}, - year = {2021}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {168}, - pages = {120764}, - publisher = {{Elsevier BV}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120764}, - urldate = {2021-04-20} -} - -@techreport{EuropeanCommission2009, - title = {Living {{Labs}} for User-Driven Open Innovation - an Overview of the Living Labs Methodology, Activities and Achievements}, - author = {{European Commission}}, - year = {2009}, - journal = {Facilities}, - number = {January}, - pages = {1--64}, - institution = {{European Commission - Information Society and Media}}, - doi = {10.2759/34481}, - abstract = {Beschreibung einiger Projekte, die sich damit besch ftigen, Open Innovation zu unterst tzen. Nutzen von LLs in den Bereich eWellbeing (uA AAL), eServices, eDemocracy and eGovernance, ICT for Energy Efficiency. Nutzen f r die diversen Stakeholder (Nutzer, KMUs, Forschungspartner Wirtschaft und Gesellschaft). LL schlagen Br cke zwischen Technologieidee und - entwicklung und Markteintritt und -befriedigung. Meistens werden LLs in der Applied Research Phase eingesetzt: Prototypen in LL "getestet" und dann f r den Mainstream weiterentwickelt. Vorteile von Open Innovation: Effektivit t des Innovationspozesses, RuD Ergebnisse, Wettbewerbsf higkeit von KMUs}, - isbn = {9789279103582} -} - -@incollection{EuropeanCommission2019, - title = {Green {{New Deal}}}, - booktitle = {Solar {{Power}}}, - author = {{European Commission}}, - year = {2019}, - month = apr, - eprint = {10.2307/j.ctvd1c6zh.7}, - eprinttype = {jstor}, - pages = {47--65}, - publisher = {{University of California Press}}, - doi = {10.2307/j.ctvd1c6zh.7}, - file = {/Users/fabio/Zotero/storage/DD2UC8QU/The European Green Deal.pdf} -} - -@article{EuropeanCommission2019a, - title = {The {{European Green Deal}}}, - author = {{European Commission}}, - year = {2019}, - journal = {European Commission}, - volume = {53}, - number = {9}, - eprint = {1011.1669v3}, - pages = {24}, - issn = {1098-6596}, - doi = {10.1017/CBO9781107415324.004}, - abstract = {Predicting the binding mode of flexible polypeptides to proteins is an important task that falls outside the domain of applicability of most small molecule and protein-protein docking tools. Here, we test the small molecule flexible ligand docking program Glide on a set of 19 non-{$\alpha$}-helical peptides and systematically improve pose prediction accuracy by enhancing Glide sampling for flexible polypeptides. In addition, scoring of the poses was improved by post-processing with physics-based implicit solvent MM- GBSA calculations. Using the best RMSD among the top 10 scoring poses as a metric, the success rate (RMSD {$\leq$} 2.0 \AA{} for the interface backbone atoms) increased from 21\% with default Glide SP settings to 58\% with the enhanced peptide sampling and scoring protocol in the case of redocking to the native protein structure. This approaches the accuracy of the recently developed Rosetta FlexPepDock method (63\% success for these 19 peptides) while being over 100 times faster. Cross-docking was performed for a subset of cases where an unbound receptor structure was available, and in that case, 40\% of peptides were docked successfully. We analyze the results and find that the optimized polypeptide protocol is most accurate for extended peptides of limited size and number of formal charges, defining a domain of applicability for this approach.}, - archiveprefix = {arxiv}, - isbn = {9788578110796}, - pmid = {25246403}, - keywords = {icle}, - file = {/Users/fabio/Zotero/storage/KCHEY95W/COMMUNICATION FROM THE COMMISSION TO THE EUROPEAN PARLIAMENT, THE EUROPEAN COUNCIL, THE COUNCIL, THE EUROPEAN ECONOMIC AND SOCIAL COMMITTEE AND THE COMMITTEE OF THE REGIONS The European Green Deal COM2019640 f.pdf} -} - -@article{EuropeanCommission2019b, - title = {Sustainable {{Europe Investment Plan European}} - {{European Green Deal Investment Plan}}}, - author = {{European Commission}}, - year = {2019}, - journal = {Journal of Chemical Information and Modeling}, - volume = {53}, - number = {9}, - eprint = {1011.1669v3}, - pages = {1689--1699}, - issn = {1098-6596}, - doi = {10.1017/CBO9781107415324.004}, - abstract = {Predicting the binding mode of flexible polypeptides to proteins is an important task that falls outside the domain of applicability of most small molecule and protein-protein docking tools. Here, we test the small molecule flexible ligand docking program Glide on a set of 19 non-{$\alpha$}-helical peptides and systematically improve pose prediction accuracy by enhancing Glide sampling for flexible polypeptides. In addition, scoring of the poses was improved by post-processing with physics-based implicit solvent MM- GBSA calculations. Using the best RMSD among the top 10 scoring poses as a metric, the success rate (RMSD {$\leq$} 2.0 \AA{} for the interface backbone atoms) increased from 21\% with default Glide SP settings to 58\% with the enhanced peptide sampling and scoring protocol in the case of redocking to the native protein structure. This approaches the accuracy of the recently developed Rosetta FlexPepDock method (63\% success for these 19 peptides) while being over 100 times faster. Cross-docking was performed for a subset of cases where an unbound receptor structure was available, and in that case, 40\% of peptides were docked successfully. We analyze the results and find that the optimized polypeptide protocol is most accurate for extended peptides of limited size and number of formal charges, defining a domain of applicability for this approach.}, - archiveprefix = {arxiv}, - isbn = {9788578110796}, - pmid = {25246403}, - file = {/Users/fabio/Zotero/storage/PIWH7T4F/Commission Communication on the Sustainable Europe Investment Plan.pdf} -} - -@article{EuropeanEnviromentAgency2017, - title = {Sustainable {{Engineering Principles}} and {{Practice}}}, - author = {{European Enviroment Agency} and {Bakshi Bhavik R} and {UN Environment Programme} and {United Nations Environment Programme}}, - year = {2017}, - journal = {Journal of Chemical Information and Modeling}, - volume = {110}, - number = {January}, - eprint = {23528340\%5Cnhttp://uneplive.unep.org/theme/index/13\#\%0Awww.iea.org\%0Ahttps://www.eea.europa.eu/publications/construction-and-demolition-waste-challenges/at\_download/file}, - eprinttype = {pubmed}, - pages = {8}, - issn = {1873-2518}, - abstract = {Construction and demolition waste (C\&DW) comprises the largest waste stream in the EU, with relatively stable amounts produced over time and high recovery rates. Although this may suggest that the construction sector is highly circular, scrutiny of waste management practices reveals that C\&DW recovery is largely based on backfilling operations and low-grade recovery, such as using recycled aggregates in road sub-bases. This briefing examines how circular economy-inspired actions can help achieve waste policy objectives, namely waste prevention and increase both the quantity and the quality of recycling for C\&DW while reducing hazardous materials in the waste. Key messages EU countries are on track to fulfil the 70 \% recovery target of 2020, with most countries already exceeding the target in 2016. • The high recovery rates of C\&DW in Europe are mostly achieved by using recovered waste for practices such as backfilling and low-grade recovery applications, reducing the potential to move towards truly circular waste management. • Increased waste prevention and higher and better quality recycling can be achieved by overcoming uncompetitive pricing, lack of trust in the quality of secondary materials, lack of information on the composition of materials used in existing buildings and the long delay between implementing actions on new buildings and their effect on waste management several decades later. • Circular economy-inspired actions, facilitated by measures such as standardising secondary raw materials and sharing information among stakeholders, have a high potential to contribute to increased waste prevention and to higher and better quality recycling. • Resource efficiency and waste Resource efficiency and waste {$>$} Waste management {$>$} Construction and demolition waste: challenges and opportunities in a circular economy 1}, - isbn = {9788578110796}, - pmid = {25246403}, - file = {/Users/fabio/Zotero/storage/5UNHVFHN/Bhavik R Bakshi - Sustainable Engineering_ Principles and Practice (2019, Cambridge University Press) - libgen.lc.pdf} -} - -@techreport{Europeenne2019, - title = {Le Pacte {{Ver}} Pour {{L}}'{{Europe}}}, - author = {Europ{\'e}{\'e}nne, Comission}, - year = {2019}, - file = {/Users/fabio/Zotero/storage/UCIA4HRH/european-green-deal-communication_fr.pdf} -} - -@article{eustachioSustainabilityLeadershipConceptual2023, - title = {Sustainability Leadership: {{Conceptual}} Foundations and Research Landscape}, - shorttitle = {Sustainability Leadership}, - author = {Eustachio, Jo{\~a}o Henrique Paulino Pires and Caldana, Adriana Cristina Ferreira and Leal Filho, Walter}, - year = {2023}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {415}, - pages = {137761}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137761}, - urldate = {2023-07-03}, - abstract = {Sustainability leadership (SL) is a complex and relevant phenomenon that can contribute to several types of organisations during the process of becoming more sustainability-oriented. Over the past few years, a considerable number of publications have increased the level of knowledge in this field; however, on the other hand, it also has generated more complexity, literature dispersity and lack of complete understanding of the possible research avenues on SL. This paper aims to address this by complementing and building on previous qualitative and quantitative studies of SL by unveiling and exploring the landscape of the research field. This study differs from prior research in three main ways: (1) explores how the term SL evolved from the leadership theory, (2) explores the research streams that scholars have been conducting in the field by adopting a robust search string revised by specialists and considering a wide range of terms related to formal and informal leadership, as well as sustainability-related terms and (3) understands how the several leadership theories and styles are connected to sustainable development (SD) and corporate social responsibility (CSR). After applying the inclusion and exclusion criteria, a total of 1,813 well-cited papers published in top journals that directly tackle sustainability leadership were selected. This sample was then used for the bibliometric assessment based on the co-occurrence of terms technique. The results indicate the existence of four main clusters and twelve subclusters, which can be considered research strands. In addition, this study also explores how the selected studies build on several leadership theories in order to understand how leadership aspects can contribute to SD and CSR adoption.}, - langid = {english}, - keywords = {Bibliometric analysis,Corporate social responsibility,Corporate sustainability,Responsible leaders,Sustainability leadership}, - file = {/Users/fabio/Zotero/storage/DVIIS2B6/S0959652623019194.html} -} - -@article{Evangelista2015, - title = {Business Services and the Export Performances of Manufacturing Industries}, - author = {Evangelista, Rinaldo and Lucchese, Matteo and Meliciani, Valentina}, - year = {2015}, - month = nov, - journal = {Journal of Evolutionary Economics}, - volume = {25}, - number = {5}, - pages = {959--981}, - issn = {0936-9937}, - doi = {10.1007/s00191-015-0400-1} -} - -@article{Evans2015, - title = {Living Labs and Co-Production: {{University}} Campuses as Platforms for Sustainability Science}, - author = {Evans, James and Jones, Ross and Karvonen, Andrew and Millard, Lucy and Wendler, Jana}, - year = {2015}, - month = oct, - journal = {Current Opinion in Environmental Sustainability}, - volume = {16}, - pages = {1--6}, - publisher = {{Elsevier B.V.}}, - issn = {18773435}, - doi = {10.1016/j.cosust.2015.06.005}, - abstract = {Living labs and co-production are increasingly popular strategies for universities to address sustainability challenges and yet the links between them remain largely implicit. This paper discusses the potential of living labs to provide a holistic and iterative framework for the co-production of knowledge. The University Living Lab initiative was launched in 2012 to transform the University of Manchester campus into a site for applied teaching and research around sustainability. Its goal was to provide a framework for students and academics to engage with the opportunities to work with Estates staff and their environmental consultants on applied sustainability challenges. This paper discusses the generation of living lab projects, the design of the campus as a living lab, and institutional visibility, identifying the key strengths of the living lab approach and the challenges of applying it more broadly.} -} - -@article{evansIntegratedCircularEconomy2023, - title = {An Integrated Circular Economy Model for Transformation towards Sustainability}, - author = {Evans, Susan}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {388}, - pages = {135950}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.135950}, - urldate = {2023-02-09}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/RME2QNM8/Evans - 2023 - An integrated circular economy model for transform.pdf;/Users/fabio/Zotero/storage/T7I99DF4/S0959652623001087.html} -} - -@article{evansModellingTestbedDemonstrate2023, - title = {A Modelling Testbed to Demonstrate the Circular Economy of Water}, - author = {Evans, B. and Khoury, M. and {Vamvakeridou-Lyroudia}, L. and Chen, O. and Mustafee, N. and Chen, A. S. and Djordjevic, S. and Savic, D.}, - year = {2023}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {405}, - pages = {137018}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137018}, - urldate = {2023-05-01}, - abstract = {Climate change poses significant challenges in terms of water scarcity, environmental crisis, and economic uncertainty. This situation drives an increasing need to pursue more sustainable futures and to conserve and maximise the use of resources whenever possible. The EU-funded H2020 NextGen project aimed to boost sustainability using new and novel technologies and approaches implemented within the water cycle, and to maximise the efficient use of water and water-embedded resources. To facilitate and communicate the potential benefits of such technologies, NextGen developed Serious Games (SGs), enabled by underlying System Dynamic Models (SDMs), for demonstrating how interactions between water, energy, and materials/embedded resources within the urban water cycle can be utilised in the context of the Circular Economy of water. As part of a fast-track development process, a testbed dubbed ``Toy Town'' was developed that encompasses a range of technologies and options that provides a demonstrable framework that can later be refined and modified accordingly for other case studies. The underlying SDM driving the SG is built using the Julia programming language. The testbed incorporates a range of components, including water-saving and water-reuse technologies, stormwater management, and wastewater treatment systems. The SDM acts fundamentally as a mass-balance model tracking over time volumetric flows of water/wastewater and the concentrations/dilution of pollutants/material within the urban water cycle. A variety of water use, water reuse and wastewater treatment components can be tested within this model to maximise the resource potential of the water and material moving through the cycle. The paper focuses on an extreme drought scenario and highlights the benefits of a modelling testbed for exploring potential technological solutions for managing the urban water cycle and how such solutions can be employed in the context of the circular economy of water. The NextGen SG thus has the potential to improve stakeholders' understanding of the implementation of novel technologies in the water cycle and the benefits that could be accrued by such stakeholder groups.}, - langid = {english}, - keywords = {Circular economy,Julia,Serious game,System dynamic modelling,Water}, - file = {/Users/fabio/Zotero/storage/SSS7PQZV/Evans et al_2023_A modelling testbed to demonstrate the circular economy of water.pdf;/Users/fabio/Zotero/storage/32CEF8KK/S0959652623011769.html} -} - -@article{Everard2021, - title = {Reconnecting Society with Its Ecological Roots}, - author = {Everard, Mark and Kass, Gary and Longhurst, James and {zu Ermgassen}, Sophus and Girardet, Herbert and {Stewart-Evans}, James and Wentworth, Jonathan and Austin, Kevin and Dwyer, Ciara and Fish, Robert and Johnston, Paul and Mantle, Gary and Staddon, Chad and Tickner, Dave and Spode, Steve and Vale, Jackie and Jarvis, Rhianna and Digby, Mathilda and Wren, Gwilym and Sunderland, Tim and Craig, Amanda}, - year = {2021}, - month = feb, - volume = {116}, - pages = {8--19}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2020.11.002}, - urldate = {2020-11-15}, - abstract = {Recent high-profile analyses of trajectories and prognoses of ecosystem decline around the world have called for a renewed focus on embedding the values of the natural world across all areas of public policy. This paper reports the results of a UK-based deliberative process involving experts from a wide range of policy domains and across societal sectors: government departments, associated agencies, national and international NGOs, professional institutions, academia and independent experts. A symposium, based on a collaborative learning approach, explored instances in which ecosystem values have successfully been embedded into public policy, identified challenges to their more widespread embedding despite commitments to do so over generational timescales, and took a backcasting approach to develop actionable outcomes required to deliver transformation change across state and civil society. Emergent themes were expressed in social, technological, environmental, economic and political terms. Recommendations for interventions in complex social-ecological systems are cross-sectoral in scope and will necessarily entail multiple agents of change, well beyond governmental leadership, within any given sphere of societal activity and interest. We identify strategic challenges for, and between, a spectrum of societal policy areas, many currently overlooking ecosystem dependencies, impacts and potential benefits. Reflections on the collaborative learning approach are also provided.}, - keywords = {Deliberation,Ecosystems,Socio-ecological systems,Sustainable development,System change,Transformation}, - file = {/Users/fabio/Zotero/storage/4W2K378P/Everard et al. - 2021 - Reconnecting society with its ecological roots.pdf} -} - -@article{Eversberg2022, - title = {Bioeconomy as a Societal Transformation: {{Mentalities}}, Conflicts and Social Practices}, - author = {Eversberg, Dennis and Fritz, Martin}, - year = {2022}, - month = jan, - journal = {Sustainable Production and Consumption}, - volume = {30}, - pages = {973--987}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2022.01.021}, - urldate = {2022-01-27}, - abstract = {In this article, we argue that a comprehensive understanding of the kinds of societal change envisioned and contested in the bioeconomy debate requires broadening the view beyond policy debates and stakeholder positions. We use representative German survey data from 2018 to explore social conflicts and coalitions for and against bio-based, post-fossil transformations within the general population. Mapping different socio-ecological mentalities in a relational analysis, we find that tensions between growth- and sufficiency-oriented, high-tech-focused and techno-skeptical as well as between fossilist and post-fossil visions shape the current `socio-ecological space of possibilities' for transformations in Germany. Results show most of the population to broadly align along a continuum between 'less is more' views skeptical of both growth and technology and visions of 'technoeconomic advance' that favor both. In addition, a more openly conflictual confrontation surfaces between a 'sufficient progress' view that looks to reconcile sufficiency with democratically checked technology use and a 'growth as usual' imaginary openly opposed to any kind of post-fossil transformation. These tensions correlate with social inequalities: Women and the materially disadvantaged tend to favor 'less is more' views, men and the more affluent those of 'technoeconomic advance'. Moreover, starkly contrasting patterns of environmentally relevant practices emerge along the growth and fossilism dimensions. We conclude that issues surrounding bio-based, post-fossil transformations are more contested among the population than in policy debates, entailing significant potential for social conflicts. The core challenge will be to establish ecologically sustainable and socially just transformation pathways in democratic and participatory ways.} -} - -@article{EvolutionGlobalPlastic2022, - ids = {liu2022a}, - title = {Evolution of Global Plastic Waste Trade Flows from 2000 to 2020 and Its Predicted Trade Sinks in 2030}, - year = {2022}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {376}, - pages = {134373}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.134373}, - urldate = {2022-11-10}, - abstract = {The implementation of China's ban on plastic waste, the Basel Convention (Amendment) and the outbreak of the COVID-19 epidemic have brought new possib\ldots}, - langid = {english}, - keywords = {Complex network,Global plastic waste trade network (GPWTN),Link prediction,Spatial and temporal evolution,Trade sinks}, - file = {/Users/fabio/Zotero/storage/3S6R89SF/S0959652622039452.html} -} - -@book{Eychenne2012, - title = {Fab {{Labs Tour}} d'horizon}, - author = {Eychenne, Fabien}, - year = {2012}, - urldate = {2022-02-28}, - file = {/Users/fabio/Zotero/storage/PIUFNSDQ/full-text.pdf} -} - -@article{Fabcity, - title = {Fab {{City Whitepaper}}}, - author = {Whitepaper, Fab City}, - abstract = {Locally productive, globally connected self-sufcient cities Abstract More than 200 years since the Industrial Revolution, global urbanisation keeps accelerating. United Nations projections indicate that 75\% of the human population will be living in cities by 2050. Newly created cities and the urbanisation process in rural areas replicates a lifestyle based on consumerism and the linear economy, causing destructive social and economic impact, while compromising the ecological systems of the planet. We are losing livelihoods through both offshoring and automation, and this in turn leads to the demise of dynamic hubs of practical and cultural knowledge, where things are made. Extreme industrialisation and globalisation have turned cities into the most voracious consumers of materials, and they are overwhelmingly the source of carbon emissions through both direct and embodied energy consumption; we need to reimagine the cities and how they operate. The Fab City is an international initiative started by IAAC, MIT's CBA, the Barcelona City Council and the Fab Foundation to develop locally productive and globally connected self-sufcient cities. The project is connected to the global Fab Lab (Fabrication Laboratory) Network and comprises an international think tank of civic leaders, makers, urbanists and innovators working on changing the paradigm of the current industrial economy where the city operates on a linear model of importing products and producing waste, to a spiral innovation ecosystem in which materials ow inside cities and information on how things are made circulates globally. Fab City is about building a new economy based on distributed data and manufacturing infrastructure.}, - file = {/Users/fabio/Zotero/storage/BR962246/Fab City Whitepaper.pdf} -} - -@misc{Fabcity2022, - title = {Fab {{City Global}} - {{Fab}}.{{City}}}, - author = {{Fabcity}}, - urldate = {2022-04-19}, - howpublished = {https://fab.city/} -} - -@article{FabricationNumeriquePersonnelle, - title = {La Fabrication Num\'erique Personnelle, Pratiques et Discours d'un Design Diffus}, - urldate = {2022-02-22}, - file = {/Users/fabio/Zotero/storage/BX4LLJHE/full-text.pdf} -} - -@article{FaccinideLima2019, - title = {Towards {{Digital Manufacturing}} of {{Smart Multimaterial Fibers}}}, - author = {{Faccini de Lima}, Camila and {van der Elst}, Louis A. and Koraganji, Veda Narayana and Zheng, Mengxin and Gokce Kurtoglu, Merve and Gumennik, Alexander}, - year = {2019}, - month = dec, - journal = {Nanoscale Research Letters}, - volume = {14}, - number = {1}, - pages = {209}, - issn = {1931-7573}, - doi = {10.1186/s11671-019-3031-x} -} - -@article{fachbachDriversConsumersIntention2022, - title = {Drivers of the Consumers' Intention to Use Repair Services, Repair Networks and to Self-Repair}, - author = {Fachbach, Ines and Lechner, Gernot and Reimann, Marc}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {346}, - pages = {130969}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130969}, - urldate = {2022-03-13} -} - -@article{Fadda2018, - title = {Waste Collection in Urban Areas: {{A}} Case Study}, - author = {Fadda, Edoardo and Gobbato, Luca and Perboli, Guido and Rosano, Mariangela and Tadei, Roberto}, - year = {2018}, - journal = {Interfaces}, - volume = {48}, - number = {4}, - pages = {307--322}, - issn = {1526551X}, - doi = {10.1287/inte.2018.0943}, - abstract = {The Optimization for Networked Data in Environmental Urban Waste Collection (ONDE-UWC) project is, to the best of our knowledge, the first attempt to apply the Internet of Things (IoT) paradigm to the field of waste collection. Sensors installed in dumpsters and garbage trucks share data, such as weight measurements and the number of user accesses. In this study, we schedule the weekly waste-collection activities for multiple types of waste without imposing periodic routes. An important characteristic of this project is that we consider heterogeneous stakeholders with different backgrounds and knowledge. In this context, we apply the GUEST OR methodology, highlighting how it can support the decision-making process to reduce the effects of these differences. As a result, we reduced the time required to implement the solution, increased operational efficiency, and achieved cost savings.}, - keywords = {Internet of things,Manpower planning,Smart cities,Vehicle routing and scheduling waste collection}, - file = {/Users/fabio/Zotero/storage/LHRWKLWR/Waste Collection in Urban Areas- A Case Study.pdf} -} - -@inproceedings{Fahad2012, - title = {A New Benchmarking Part for Evaluating the Accuracy and Repeatability of {{Additive Manufacturing}} Processes}, - booktitle = {2nd {{International Conference}} on {{Mechanical}}, {{Production}} and {{Automobile Engineering}} ({{ICMPAE}}'2012)}, - author = {Fahad, Muhammad and Hopkinson, Neil}, - year = {2012}, - pages = {234--238}, - address = {{Singapore}}, - keywords = {accuracy,additive manufacturing,benchmarking}, - file = {/Users/fabio/Zotero/storage/VXDL6S6G/A new benchmarking part for evaluating the accuracy and repeatability of Additive Manufacturing processes.pdf} -} - -@article{Fahad2013, - title = {Novel Polymeric Support Materials for Jetting Based Additive Manufacturing Processes}, - author = {Fahad, M. and Dickens, P. and Gilbert, M.}, - year = {2013}, - journal = {Rapid Prototyping Journal}, - volume = {19}, - number = {4}, - pages = {230--239}, - issn = {1355-2546}, - doi = {10.1108/13552541311323245}, - abstract = {Novel polymeric support materials for jetting based additive manufacturing processes}, - keywords = {inkjet printers,jetting,manufacturing systems,methylcellulose,paper type research paper,support material,thermal gel formation,thermal properties of materials}, - file = {/Users/fabio/Zotero/storage/4JUCBX74/Novel polymeric support materials for jetting based additive manufacturing processes.pdf} -} - -@incollection{Fainelli2008, - title = {Open {{Pattern}} Project: A Comprehensive Modular Routing Platform}, - booktitle = {Home Netw.}, - author = {Fainelli, Florian and Carcelle, Xavier and Flesch, Etienne and {Saint-Genest}, Gwena{\"e}l and Afifi, Hossam}, - year = {2008}, - volume = {256}, - pages = {197--214}, - publisher = {{Springer US}}, - address = {{Boston, MA}}, - issn = {18684238}, - doi = {10.1007/978-0-387-77216-5_15}, - abstract = {The last developments of the home gateways, DSL-boxes, off-the-shelf wireless routers, wireless communities initiatives have brought a great number of network hardware to the home. These different developments have been followed by different initiatives of "hacking the box" to be able to flash this specific hardware with open-source firmware resulting from the contribution of several open-source developers (OpenWrt, Frei-funk...). Due to the lack of "open hardware" off-the-shelf available to adjust the platform to the home-networking (and networking) applications, Open-Pattern is a project to develop such a hardware based on the inputs from the past initiatives and bringing a box based on an open hardware (i.e. open specifications of the targeted hardware), using a motherboard and able to receive daughterboard to expand the functionalities in conjunction with the current open source project to be using the box once this one is ready to be shipped. \textcopyright{} 2008 by International Federation for lnfonnation Processing.}, - isbn = {978-1-4419-4580-8}, - keywords = {Boards,Electronic,Home networking,Network interfaces,Open hardware,Open source,Routing,Wireless}, - file = {/Users/fabio/Zotero/storage/CJPW7X8E/Fainelli et al_2008_Open Pattern project.pdf} -} - -@inproceedings{fainelliOpenpatternProjectComprehensive2008, - title = {Openpattern Project: {{A}} Comprehensive Modular Routing Platform}, - booktitle = {{{IFIP Advances}} in {{Information}} and {{Communication Technology}}}, - author = {Fainelli, Florian and Carcelle, Xavier and Flesch, Etienne and {Saint-Genest}, Gwena{\'e}l and Afifi, Hossam}, - year = {2008}, - volume = {256}, - pages = {197--214}, - publisher = {{Springer New York LLC}}, - issn = {18684238}, - doi = {10.1007/978-0-387-77216-5_15}, - urldate = {2020-11-14}, - abstract = {The last developments of the home gateways, DSL-boxes, off-the-shelf wireless routers, wireless communities initiatives have brought a great number of network hardware to the home. These different developments have been followed by different initiatives of "hacking the box" to be able to flash this specific hardware with open-source firmware resulting from the contribution of several open-source developers (OpenWrt, Frei-funk...). Due to the lack of "open hardware" off-the-shelf available to adjust the platform to the home-networking (and networking) applications, Open-Pattern is a project to develop such a hardware based on the inputs from the past initiatives and bringing a box based on an open hardware (i.e. open specifications of the targeted hardware), using a motherboard and able to receive daughterboard to expand the functionalities in conjunction with the current open source project to be using the box once this one is ready to be shipped. \textcopyright{} 2008 by International Federation for lnfonnation Processing.}, - isbn = {978-1-4419-4580-8}, - keywords = {Boards,Electronic,Home networking,Network interfaces,Open hardware,Open source,Routing,Wireless}, - file = {/Users/fabio/Zotero/storage/BVQ6DDL3/full-text.pdf} -} - -@article{Faludi2019, - title = {Best Practices for Teaching Green Invention: {{Interviews}} on Design, Engineering, and Business Education}, - author = {Faludi, Jeremy and Gilbert, Cindy}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {234}, - pages = {1246--1261}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.246}, - urldate = {2020-05-21}, - abstract = {This study investigated best practices in teaching environmental responsibility to inventors and innovators. Because successful invention includes engineering, design, and business, best practices in all three disciplines were investigated, as well as connections among them. The investigation sought best practices in curriculum, delivery methods, and administrative leadership to maximize environmental responsibility in invention education. To find best practices, interviews of 25 instructors, administrators, and graduates from sustainable innovation and entrepreneurship programs were performed; a small literature review provided background and validation. Results found that for curriculum, there was no ``silver bullet'' but a wide spread of topics for different contexts; however, core topics included business knowledge, measurement of impacts, systems thinking, communication, and inclusion of social justice for broader sustainability. For delivery methods, project-based learning in interdisciplinary teams was a best practice, especially when partnering with industry or other external stakeholders. For leadership, faculty leading with strong administrative support was often praised, though other models were also described, and barriers were mentioned. Leadership best practices also included involvement of all aspects of institutions: faculty, administration, students, facilities, and operations.}, - keywords = {Business education,Design education,Engineering education,Innovation,Sustainable entrepreneurship} -} - -@article{Fambri1997, - title = {Biodegradable Fibres of Poly(l-Lactic Acid) Produced by Melt Spinning}, - author = {Fambri, L. and Pegoretti, A. and Fenner, R. and Incardona, S.D. and Migliaresi, C.}, - year = {1997}, - month = jan, - journal = {Polymer}, - volume = {38}, - number = {1}, - pages = {79--85}, - issn = {00323861}, - doi = {10.1016/S0032-3861(96)00486-7}, - urldate = {2014-09-12}, - keywords = {biodegradable fibres,melt spinning,polylactic acid}, - file = {/Users/fabio/Zotero/storage/6X2SWEPA/Fambri et al. - 1997 - Biodegradable fibres of poly(l-lactic acid) produced by melt spinning.pdf} -} - -@incollection{Fambri2010, - title = {Crystallization and {{Thermal Properties}}}, - booktitle = {Poly({{Lactic Acid}})}, - author = {Fambri, Luca and Migliaresi, Claudio}, - year = {2010}, - month = sep, - pages = {113--124}, - publisher = {{John Wiley \& Sons, Inc.}}, - address = {{Hoboken, NJ, USA}}, - doi = {10.1002/9780470649848.ch9} -} - -@article{farajpourDigitalSupplyChain2022, - title = {Digital Supply Chain Blueprint via a Systematic Literature Review}, - author = {Farajpour, Farnoush and Hassanzadeh, Alireza and Elahi, Shaban and Ghazanfari, Mehdi}, - year = {2022}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {184}, - pages = {121976}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.121976}, - urldate = {2022-09-18}, - abstract = {During recent years have both practitioners and academic people tried to focus on Digital Supply Chain (DSC) as a phenomenon which has its own constructs, structure, limitations and possibilities, mostly in order to magnify the indispensable need for transformation due to the growing dominance of digital technologies. Despite all valuable efforts, DSC has still a long way ahead to be known, understood and implemented all over a supply chain. Therefore, this study presents a literature review of 107 papers on DSC to clarify its definition in addition to provide insight on the most prominent components of a DSC framework. It is done by updating previous literature reviews and conducting a classification and thematic analysis on the reviewed papers. Moreover, in order to have more specific look on building blocks of DSC, a framework for digital supply chain is designed considering the value stream in DSC. The framework consists of several layers, including DSC strategies, enablers, processes, data management and analytics, DSC flows and DSC features. These components work seamlessly to provide virtual values for customers and other stakeholders. Finally, managerial implications and future research directions are remarked.}, - langid = {english}, - keywords = {Digital supply chain,Digital transformation,framework,Systematic literature review,Thematic analysis,Value chain}, - file = {/Users/fabio/Zotero/storage/PKAMCB5V/S0040162522004978.html} -} - -@article{Farcas2020, - title = {Pulmonary and Systemic Toxicity in Rats Following Inhalation Exposure of 3-{{D}} Printer Emissions from Acrylonitrile Butadiene Styrene ({{ABS}}) Filament}, - author = {Farcas, Mariana T. and McKinney, Walter and Qi, Chaolong and Mandler, Kyle W. and Battelli, Lori and Friend, Sherri A. and Stefaniak, Aleksandr B. and Jackson, Mark and Orandle, Marlene and Winn, Ava and Kashon, Michael and LeBouf, Ryan F. and Russ, Kristen A. and Hammond, Duane R. and Burns, Dru and Ranpara, Anand and Thomas, Treye A. and Matheson, Joanna and Qian, Yong}, - year = {2020}, - month = oct, - journal = {Inhalation Toxicology}, - volume = {32}, - number = {11-12}, - pages = {403--418}, - issn = {0895-8378}, - doi = {10.1080/08958378.2020.1834034} -} - -@article{Fard2019, - title = {On the Strain-Life Fatigue Parameters of Additive Manufactured Plastic Materials through Used Filament Fabrication Process}, - author = {Fard, Soran Hassani and Hashemi, Seyed M.}, - year = {2019}, - month = nov, - journal = {Additive Manufacturing}, - pages = {100973}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100973} -} - -@article{farlaSustainabilityTransitionsMaking2012, - title = {Sustainability Transitions in the Making: {{A}} Closer Look at Actors, Strategies and Resources}, - author = {Farla, Jacco and Markard, Jochen and Raven, Rob and Coenen, Lars}, - year = {2012}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {79}, - number = {6}, - pages = {991--998}, - issn = {00401625}, - doi = {10.1016/j.techfore.2012.02.001}, - urldate = {2022-03-13} -} - -@article{Farooque2019, - title = {Circular Supply Chain Management: {{A}} Definition and Structured Literature Review}, - author = {Farooque, Muhammad and Zhang, Abraham and Th{\"u}rer, Matthias and Qu, Ting and Huisingh, Donald}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {228}, - pages = {882--900}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.303}, - urldate = {2020-03-22}, - abstract = {Circular economy is increasingly recognized as a better alternative to the dominant linear (take, make, and dispose)economic model. Circular Supply Chain Management (CSCM), which integrates the philosophy of the circular economy into supply chain management, offers a new and compelling perspective to the supply chain sustainability domain. Consequently, there is increasing research interest. However, a review of the extant literature shows that a comprehensive integrated view of CSCM is still absent in the extant literature. This prohibits a clear distinction compared to other supply chain sustainability concepts and hinders further progress of the field. In response, this research first classifies various terminologies related to supply chain sustainability and conceptualizes a unifying definition of CSCM. Using this definition as a base, it then conducts a structured literature review of 261 research articles on the current state of CSCM research. Based on the review results, the researchers call for further studies in the following directions that are important but received little or no attention: design for circularity, procurement and CSCM, biodegradable packaging, circular supply chain collaboration and coordination, drivers and barriers of CSCM, circular consumption, product liabilities and producer's responsibility, and technologies and CSCM.}, - keywords = {Circular economy,Circular supply chain,Circular supply chain management,Supply chain management,Sustainability,Sustainable supply chain} -} - -@article{farrukhIntegratingSustainableValue2020, - title = {Integrating Sustainable Value Thinking into Technology Forecasting: {{A}} Configurable Toolset for Early Stage Technology Assessment}, - author = {Farrukh, Clare and Holgado, Maria}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120171}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120171}, - urldate = {2020-07-20}, - abstract = {There is an urgent need for technology development to make a sustainable or restorative contribution to the environment, with its inherent links to society and societal welfare. Forward-looking activities, such as firm level technology forecasting and technology intelligence, are increasingly important in providing positive impact that is complementary to policy level interventions. However, selecting and implementing appropriate approaches to conduct these activities and quantifying their value contribution is still difficult. This article seeks to demonstrate how technology opportunities may be explored more effectively by combining existing methods for assessing new technology and identifying sustainable value, in an approach for industry that is both configurable and practical while delivering tangible benefits. It details the two-year university-industry collaboration and testing of a configurable toolset, based on four templates used in a workshop setting. Results indicate that the toolset has successfully probed technological, environmental and social capabilities, promoted the selection and implementation of an appropriate approach and led to the quantification of value through the inclusive, transparent and documented assessment of technology opportunities and the tangible actions identified. In summary, the toolset supports company employees in realising a measure of prospective sensemaking, which is a key deliverable from forward-looking activities.}, - keywords = {Corporate foresight,Management tools,Prospective sensemaking,Sustainable value,Technology assessment,Technology forecasting} -} - -@article{Fateri2018, - title = {Feasibility Study on Additive Manufacturing of Recyclable Objects for Space Applications}, - author = {Fateri, Miranda and Kaouk, Ali and Cowley, Aidan and Siarov, Stefan and Palou, Manel Vera and Gonz{\'a}lez, Fernando Gobartt and Marchant, Romain and Cristoforetti, Samantha and Sperl, Matthias}, - year = {2018}, - month = dec, - journal = {Additive Manufacturing}, - volume = {24}, - pages = {400--404}, - issn = {22148604}, - doi = {10.1016/j.addma.2018.09.020}, - file = {/Users/fabio/Zotero/storage/7UCBNI7G/Feasibility study on additive manufacturing of recyclable objects for space applications.pdf} -} - -@article{fatimahIndustryBasedSustainable2020, - title = {Industry 4.0 Based Sustainable Circular Economy Approach for Smart Waste Management System to Achieve Sustainable Development Goals: {{A}} Case Study of {{Indonesia}}}, - author = {Fatimah, Yun Arifatul and Govindan, Kannan and Murniningsih, Rochiyati and Setiawan, Agus}, - year = {2020}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {269}, - pages = {122263}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122263}, - urldate = {2020-07-14}, - abstract = {Indonesia is facing a number of independently managed challenges related to the collection, transportation, processing (composting, recycling), and landfill dependence on waste management. An intervention is needed to bring stakeholders together to solve these waste challenges. The objectives of this study are to investigate the fundamental issues and opportunities and to develop a sustainable and smart country-wide waste management system using industry 4.0 technologies. The system should provide a multi-dimensional approach, determine the maturity level of the waste management system in a technical method, and pursue the goal of designing a new strategy to minimise waste management problems. A comprehensive systematic literature review, intensive focus group discussions, and direct observation in Indonesian cities were approaches used to develop waste management business processes and their system design. Waste business processes consist of mixed-collecting, sorting, transporting, varied-treatment, and chained-disposal. The design of the proposed waste management system presents circular economy processes that can separate municipal waste, identify waste characteristics, and determine sustainable waste treatment technologies through the use of Internet of Thing (IoT) as the integrator. This study contributes to the sustainable development goals (SDG's) such as Good health, and wellbeing (SDG 3); Clean water and sanitation (SDG 6); Decent Work and Economic Growth (SDG 8); Responsible Consumption and Production (SDG 12) and Climate Action (SDG 13). The study proposes a new design of smart and sustainable waste management which could achieve satisfactory economic, social, and environmental waste management performances.}, - keywords = {Industry 4.0,Internet of thing (IoT),Maturity model,Smart waste management,Sustainability,Sustainable circular economy,Sustainable development goals (SDG's)} -} - -@article{fauchartDoItYourselfDoItTogetherHow2021, - title = {Do-{{It-Yourself}} or {{Do-It-Together}}: {{How}} Digital Technologies Affect Creating Alone or with Others?}, - author = {Fauchart, Emmanuelle and {Bacache-Beauvallet}, Maya and Bourreau, Marc and Moreau, Fran{\c c}ois}, - year = {2021}, - month = oct, - journal = {Technovation}, - pages = {102412}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2021.102412}, - urldate = {2021-11-07} -} - -@article{Faugel2013, - title = {Open Source Hard- and Software: {{Using Arduino}} Boards to Keep Old Hardware Running}, - author = {Faugel, Helmut and Bobkov, Volodymyr}, - year = {2013}, - month = oct, - journal = {Fusion Engineering and Design}, - volume = {88}, - number = {6-8}, - pages = {1276--1279}, - issn = {09203796}, - doi = {10.1016/j.fusengdes.2012.12.005} -} - -@article{Feeley2014, - title = {Evaluation of {{Potential Fair Trade Standards}} for an {{Ethical}} 3-{{D Printing Filament}}}, - author = {Feeley, S. R. and Wijnen, Bas and Pearce, Joshua M.}, - year = {2014}, - month = sep, - journal = {Journal of Sustainable Development}, - volume = {7}, - number = {5}, - pages = {1--12}, - issn = {1913-9071}, - doi = {10.5539/jsd.v7n5p1}, - urldate = {2015-03-24}, - abstract = {Following the rapid rise of distributed additive manufacturing with 3-D printing has come the technical development of filament extruders and recyclebots, which can turn both virgin polymer pellets and post-consumer shredded plastic into 3-D filament. Similar to the solutions proposed for other forms of ethical manufacturing, it is possible to consider a form of ethical 3-D printer filament distribution being developed. There is a market opportunity for producing this ethical 3-D printer filament, which is addressed in this paper by developing an ``ethical product standard'' for 3-D filament based upon a combination of existing fair-trade standards and technical and life cycle analysis of recycled filament production and 3-D printing manufacturing. These standards apply to businesses that can enable the economic development of waste pickers and include i) minimum pricing, ii) fair trade premium, iii) labor standards, iv) environmental and technical standards, v) health and safety standards, and vi) social standards including those that cover discrimination, harassment, freedom of association, collective bargaining and discipline.}, - isbn = {1906487146}, - keywords = {3-d printing,distributed manufacturing,ethical product standards,fair trade standards,filament}, - file = {/Users/fabio/Zotero/storage/5IPCUYSK/Feeley, Wijnen, Pearce - 2014 - Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament.pdf} -} - -@article{fellnerRecyclingRateOnly2020, - title = {Recycling Rate \textendash{} {{The}} Only Practical Metric for a Circular Economy?}, - author = {Fellner, Johann and Lederer, Jakob}, - year = {2020}, - month = jul, - journal = {Waste Management}, - volume = {113}, - pages = {319--320}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.06.013}, - urldate = {2020-06-22}, - abstract = {The paper is related to the suggestion of metrics for measuring and fostering circular economy. Besides a recycling rate based evaluation, the author recommend to include also a subsitution factor describing the share of primary resources subsituted by the establishment of a circular economy.}, - keywords = {Circular economy,Metric,Recycling rate,Subsitution factor} -} - -@article{Feng2019, - title = {Ecological Well-Being Performance Growth in {{China}} (1994\textendash 2014): {{From}} Perspectives of Industrial Structure Green Adjustment and Green Total Factor Productivity}, - author = {Feng, Yingjie and Zhong, Shuiying and Li, Qiangyi and Zhao, Xiaomeng and Dong, Xu}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117556}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.07.031}, - urldate = {2020-05-21}, - abstract = {Industrial structure green adjustment (ISGA) and green total factor productivity (GTFP), deriving from development processes for green goals, recently attracted great attention as two ways to achieve Ecological Well-being Performance (EWP) growth, which is one of the main green development goals that humanity should pursue, and which affects the efficiency improvement of transforming ecological consumption into human well-being. In this paper, the effects of ISGA and GTFP on EWP growth are empirically tested in a dynamic panel model of spatial econometrics, using statistics from 30 provinces of China in the 1994\textendash 2014 period. In particular, the indicator system of ISGA is firstly constructed based on the theories of EWP and three-dimensional industrial ecological footprint (3DIEF). The results indicate that spatial spillovers are important factors in the effects, the main driving force for EWP growth in provinces of China had gradually shifted from ISGA to GTFP, and GTFP is essential for structural bonuses from ISGA to take effect. In addition, a provincial government needs to target reference objects from not only other provinces in the same economic zone's yardstick competition, but also ISGA and GTFP situations in geographically close or economically similar provinces. In addition, the adverse EWP effects of ISGA can be mitigated by GTFP increase or a combination of GTFP and ISGA for provinces in all stages of ISGA. In general, improving GTFP will be the main driving force for China's provincial EWP growth, and the main venue through which the adverse effects of improper ISGA can be mitigated. The present study contributes to explore the EWP growth effect of ISGA and GTFP, can at least provide a valuable guidance and in-depth understanding to researchers, operators and policy makers who wish to improve human well-being in an ecologically efficient way, as well as for the follow-up studies.}, - keywords = {Ecological well-being performance,Green total factor productivity,Industrial structure green adjustment,Spatial econometrics} -} - -@article{fergnaniSixScenarioArchetypes2020, - title = {The Six Scenario Archetypes Framework: {{A}} Systematic Investigation of Science Fiction Films Set in the Future}, - author = {Fergnani, Alessandro and Song, Zhaoli}, - year = {2020}, - month = dec, - journal = {Futures}, - volume = {124}, - pages = {102645}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102645}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/LAIHS2IA/full-text.pdf} -} - -@inproceedings{Ferkinhoff2014, - title = {Hacking for Astronomy: Can {{3D}} Printers and Open-Hardware Enable Low-Cost Sub-/Millimeter Instrumentation?}, - author = {Ferkinhoff, Carl}, - editor = {Holland, Wayne S. and Zmuidzinas, Jonas}, - year = {2014}, - month = jul, - pages = {915329}, - doi = {10.1117/12.2056627} -} - -@article{Fernandes2020, - title = {Towards Product-Service System Oriented to Circular Economy: {{A}} Systematic Review of Value Proposition Design Approaches}, - author = {Fernandes, S{\^a}nia da Costa and Pigosso, Daniela C.A. and McAloone, Tim C. and Rozenfeld, Henrique}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {257}, - pages = {120507}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120507} -} - -@article{fernandesContributionsScenarioMethodology2022, - title = {Contributions to Scenario Methodology from Approach to Sociotechnical Transitions: A Theoretical-Methodological Essay}, - author = {Fernandes, Alice Munz and de Souza, {\^A}ngela Rozane Leal and Revillion, Jean Philippe Palma}, - year = {2022}, - month = apr, - journal = {https://doi.org/10.1080/09537325.2022.2069004}, - pages = {1--14}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2022.2069004}, - urldate = {2022-05-23}, - abstract = {Scenario methodology is complex, with numerous derivative approaches and variations. Although, its multiple techniques and tools make it possible to analyze problems considered `wicked' \textendash{} of low pr...}, - keywords = {Scenario building,scientific research,sociotechnical systems,technological innovation} -} - -@article{fernandesNationalInnovationSystems2022, - title = {National Innovation Systems and Sustainability: {{What}} Is the Role of the Environmental Dimension?}, - author = {Fernandes, Ana Joana C. and Rodrigues, Ricardo Gouveia and Ferreira, Jo{\~a}o J.}, - year = {2022}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {347}, - pages = {131164}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131164}, - urldate = {2022-03-14} -} - -@article{fernandezDriversEcoinnovationDeveloping2021, - title = {Drivers of Eco-Innovation in Developing Countries: The Case of {{Chilean}} Firms}, - author = {Fern{\'a}ndez, Sara and Torrecillas, Celia and Labra, Romilio Ernesto}, - year = {2021}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {170}, - pages = {120902}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120902}, - urldate = {2021-06-20} -} - -@article{Ferrage2017, - title = {A Review of the Additive Manufacturing ({{3DP}}) of Bioceramics: Alumina, Zirconia ({{PSZ}}) and Hydroxyapatite}, - author = {Ferrage, L. and Bertrand, G. and Lenormand, P. and Grossin, D. and {Ben-Nissan}, B.}, - year = {2017}, - month = apr, - journal = {Journal of the Australian Ceramic Society}, - volume = {53}, - number = {1}, - pages = {11--20}, - issn = {2510-1560}, - doi = {10.1007/s41779-016-0003-9} -} - -@article{Ferrari2020, - title = {An Innovative {{IoT-oriented}} Prototype Platform for the Management and Valorisation of the Organic Fraction of Municipal Solid Waste}, - author = {Ferrari, Francesca and Striani, Raffaella and Minosi, Stefania and De Fazio, Roberto and Visconti, Paolo and Patrono, Luigi and Catarinucci, Luca and Esposito Corcione, Carola and Greco, Antonio}, - year = {2020}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {247}, - pages = {119618}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.119618} -} - -@article{ferreira-filipeAreBiobasedPlastics2021, - title = {Are {{Biobased Plastics Green Alternatives}}?\textemdash{{A Critical Review}}}, - shorttitle = {Are {{Biobased Plastics Green Alternatives}}?}, - author = {{Ferreira-Filipe}, Diogo A. and Pa{\c c}o, Ana and Duarte, Armando C. and {Rocha-Santos}, Teresa and Patr{\'i}cio Silva, Ana L.}, - year = {2021}, - month = jan, - journal = {International Journal of Environmental Research and Public Health}, - volume = {18}, - number = {15}, - pages = {7729}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {1660-4601}, - doi = {10.3390/ijerph18157729}, - urldate = {2023-08-31}, - abstract = {Environmental sustainability is driving an intense search for ``green materials''. Biobased plastics have emerged as a promising alternative. Their building blocks can now be obtained from diverse biomass, by-products, and organic residues due to the advances in biorefineries and bioprocessing technologies, decreasing the demand for fossil fuel resources and carbon footprint. Novel biobased polymers with high added value and improved properties and functionalities have been developed to apply diverse economic sectors. However, the real opportunities and risks of such novel biobased plastic solutions have raised scientific and public awareness. This paper provides a critical review on the recent advances in biobased polymers chemistry and emerging (bio)technologies that underpin their production and discusses the potential for biodegradation, recycling, environmental safety, and toxicity of these biobased solutions.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {biodegradation,bioplastics,circular economy,plastic pollution,sustainability}, - file = {/Users/fabio/Zotero/storage/Y8UMUQ24/Ferreira-Filipe et al_2021_Are Biobased Plastics Green Alternatives.pdf} -} - -@article{Ferreira2020, - title = {Technology Transfer, Climate Change Mitigation, and Environmental Patent Impact on Sustainability and Economic Growth: {{A}} Comparison of {{European}} Countries}, - author = {Ferreira, Jo{\~a}o J.M. and Fernandes, Cristina I. and Ferreira, Fernando A.F.}, - year = {2020}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {150}, - pages = {119770}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119770} -} - -@article{ferreiraUnderstandingAttitudesAdoption2022, - title = {Understanding Attitudes towards the Adoption of Nature-Based Solutions and Policy Priorities Shaped by Stakeholders' Awareness of Climate Change}, - author = {Ferreira, Vera and Barreira, Ana Paula and Pinto, Patr{\'i}cia and Panagopoulos, Thomas}, - year = {2022}, - month = may, - journal = {Environmental Science \& Policy}, - volume = {131}, - pages = {149--159}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.02.007}, - urldate = {2022-03-07}, - abstract = {Climate change is affecting cities worldwide. Accordingly, cities are required to find sustainable solutions to tackle climate change's effects, designing bottom-up policies to enhance their success. The involvement of stakeholders plays a central role in the definition of appropriate policies to tackle the challenges posed to cities by climate change. Nature-based solutions (NBS) are increasingly proposed to adapt to and mitigate the adverse effects of climate change. This study aims to assess the coherence of the policies emerging from stakeholders' perceptions of urban climate challenges and their preferred NBS to tackle them. Indeed, it considers whether departing from different urban climate challenges, stakeholders' choices present a coherent articulation between priority interventions, proposed solutions and expected benefits. Using a survey applied to two Portuguese cities and the chi-squared automatic interaction detector (CHAID) algorithm, we analyse the answers provided by stakeholders. The stakeholders' perceptions and preferences were not significantly influenced by their hierarchical position in their institutions, their city's location and socioeconomic setting. Heatwaves and temperature rise together with drought and water scarcity are identified as future urban challenges in Portugal. Priority interventions, as well as preferred NBS and their expected benefits, are addressed. The results show that stakeholders may make decisions that form a coherent policy, in which acknowledgment of climate change's effects interconnects with related priority interventions, suitable NBS and their benefits.}, - keywords = {Nature-based solutions,Stakeholders' perceptions,Stakeholders' preferences,Sustainable city} -} - -@article{Ferretti2020, - title = {A New Ethos for Science? {{Exploring}} Emerging {{DIY}} Science}, - author = {Ferretti, Federico and Pereira, {\^A}ngela Guimar{\~a}es}, - year = {2020}, - month = nov, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102653}, - urldate = {2020-11-23}, - file = {/Users/fabio/Zotero/storage/8IWBPHZE/Ferretti, Guimar˜, Pereira - 2020 - To appear in Futures.pdf} -} - -@article{Ferro2019, - title = {Design for {{Recycling}} in a {{Critical Raw Materials Perspective}}}, - author = {Ferro, Paolo and Bonollo, Franco}, - year = {2019}, - month = nov, - journal = {Recycling}, - volume = {4}, - number = {4}, - pages = {44}, - publisher = {{MDPI AG}}, - issn = {2313-4321}, - doi = {10.3390/recycling4040044}, - urldate = {2020-03-12}, - abstract = {The European Union (EU) identified a number of raw materials that are strategic for its economy but suffer at the same time from a high supply risk. Such critical raw materials (CRMs) are used in a wide range of commercial and governmental applications: green technology, telecommunications, space exploration, aerial imaging, aviation, medical devices, micro-electronics, transportation, defense, and other high-technology products and services. As a result, the industry, the environment, and our quality and modern way of life are reliant on the access and use of them. In this scenario, recycling may be a strategic mitigating action aimed at reducing the critical raw materials supply risks. In this work, a design strategy is proposed for alloys selection that minimizes the number of CRMs with the lowest end-of-life recycling input rate. The method is illustrated with an example.}, - keywords = {Criticality index,Materials selection,Metals and alloys,Raw material,Recycling}, - file = {/Users/fabio/Zotero/storage/JA8UP7JU/full-text.pdf} -} - -@article{Ferronato2020, - title = {Selective Collection of Recyclable Waste in {{Universities}} of Low-Middle Income Countries: {{Lessons}} Learned in {{Bolivia}}}, - author = {Ferronato, Navarro and Guisbert Lizarazu, Edith Gabriela and Velasco Tudela, Jorge Marcelo and Blanco Callisaya, Jimena Karen and Preziosi, Gianluca and Torretta, Vincenzo}, - year = {2020}, - month = mar, - journal = {Waste Management}, - volume = {105}, - pages = {198--210}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.02.014} -} - -@article{fetratiHowManageCreativity2022, - title = {How to Manage Creativity in Organizations: {{Connecting}} the Literature on Organizational Creativity through Bibliometric Research}, - author = {Fetrati, Mahdieh A. and Hansen, David and Akhavan, Payman}, - year = {2022}, - month = jul, - journal = {Technovation}, - volume = {115}, - pages = {102473}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2022.102473}, - urldate = {2022-03-08}, - abstract = {To be competitive, organizations must also be innovative, making organizational creativity a crucial capability. Accordingly, the past decade has seen an increasing attention among scholars to fields such as innovation, organizational performance, and creativity. Nevertheless, studies in organizational creativity, i.e., the management of creativity at an organizational level, are still fragmented and have not converged into a single comprehensive conceptual model. The purpose of this paper is to scrutinize the literature on organizational creativity in order to map the different perspectives on the subject and provide direction for future research. The paper thoroughly explores the literature through bibliographic research on papers published between 1980 and 2020. The literature is mapped, categorized, and analyzed to identify the different models of organizational creativity, i.e., concepts, definitions, and theories. The paper identifies seven models and shows that field could converge by connecting two tracks of the literature: the track of the dynamic componential model with the track of the personal and contextual factors. Furthermore, the paper uses this insight to propose practical guidelines for managing creativity by mapping contextual factors at the individual, team, and organizational levels that can be used with the dynamic componential model.}, - keywords = {Bibliometric study,Creativity,Organization,Organizational creativity} -} - -@article{Feygin1991, - title = {Laminated {{Object Manufacturing}} ({{LOM}}): {{A Simpler Process}}}, - author = {Feygin, Michael and Hsieh, Brian}, - year = {1991}, - journal = {Proceedings of Solid Freefonn Fabrication Symposium. Austin, TX}, - volume = {0}, - pages = {123--130}, - file = {/Users/fabio/Zotero/storage/AS9P5QSS/Feygin, Hsieh - 1991 - Laminated Object Manufacturing (LOM) A Simpler Process.pdf} -} - -@article{figgeDefinitionsCircularEconomy2023, - title = {Definitions of the Circular Economy: {{Circularity}} Matters}, - shorttitle = {Definitions of the Circular Economy}, - author = {Figge, Frank and Thorpe, Andrea Stevenson and Gutberlet, Melissa}, - year = {2023}, - month = jun, - journal = {Ecological Economics}, - volume = {208}, - pages = {107823}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107823}, - urldate = {2023-04-30}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/57MZHIQP/Figge et al_2023_Definitions of the circular economy.pdf;/Users/fabio/Zotero/storage/RDRN2MPP/S0921800923000861.html} -} - -@article{figgeDoesCircularEconomy2022, - title = {Does the Circular Economy Fuel the Throwaway Society? {{The}} Role of Opportunity Costs for Products That Lose Value over Time}, - shorttitle = {Does the Circular Economy Fuel the Throwaway Society?}, - author = {Figge, Frank and Dimitrov, Stanko and Schlosser, Rainer and Chenavaz, R{\'e}gis}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {368}, - pages = {133207}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133207}, - urldate = {2022-08-11}, - abstract = {The efficient use of natural resources is considered a necessary condition for their sustainable use. Extending the lifetime of products and using resources circularly are two popular strategies to increase the efficiency of resource use. Both strategies are usually assumed to contribute to the eco-efficiency of resource use independently. We argue that a move to a circular economy creates opportunity costs for consumers holding on to their products, due to the resource embedded in the product. Assuming rational consumers, we develop a model that determines optimal replacement times for products subject to minimizing average costs over time. We find that in a perfectly circular economy, consumers are incentivized to discard their products more quickly than in a perfectly linear economy. A direct consequence of our finding is that extending product use is in direct conflict with closing resource loops in the circular economy. We identify the salvage value of discarded products and technical progress as two factors that determine the impact that closing resource loops has on the duration of product use. The article highlights the risk that closing resource loops and moving to a more circular economy incentivizes more unsustainable behavior.}, - langid = {english}, - keywords = {Circular economy,Eco-efficiency,Economic obsolescence,Obsolescence,Opportunity cost}, - file = {/Users/fabio/Zotero/storage/YEJ5WPD9/Figge et al_2022_Does the circular economy fuel the throwaway society.pdf;/Users/fabio/Zotero/storage/XJDRBPWT/S0959652622027949.html} -} - -@article{figgeValueCreationCircular2022, - title = {Value Creation and the Circular Economy: {{A}} Tale of Three Externalities}, - shorttitle = {Value Creation and the Circular Economy}, - author = {Figge, Frank and Thorpe, Andrea Stevenson and Manzhynski, Siarhei}, - year = {2022}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13300}, - urldate = {2022-08-11}, - abstract = {By using resources more efficiently, resource users help to overcome the inherent resource scarcity on ``spaceship earth.'' One strategy in this context is to close resource loops and to use resources circularly. With fewer resources wasted, a more circular use of resources should also increase the efficiency of resource use and create more value. However, when resource users aim for a greater degree of efficiency, inadvertently they might contribute to resources being used less rather than more circularly and, consequently, less instead of more efficiently. We show how to assess the value that is created by the efficient use of resources for the case of linear and circular resource use. This allows us to identify three distinct types of positive externalities related to the circular use of resources: (1) systemic static externalities; (2) idiosyncratic dynamic externalities; and (3) systemic dynamic externalities. We describe how the value created by these externalities can be assessed and argue that they need to be considered when evaluating environmental resource use.}, - copyright = {\textcopyright{} 2022 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of the International Society for Industrial Ecology.}, - langid = {english}, - keywords = {circular economy,eco-efficiency,externality,industrial ecology,resource use indicator,value creation}, - file = {/Users/fabio/Zotero/storage/4NYPL7HQ/Figge et al_Value creation and the circular economy.pdf;/Users/fabio/Zotero/storage/9ZPTHBFH/jiec.html} -} - -@article{figueiroEducationSustainabilityHigher2022, - title = {Education for Sustainability in Higher Education Institutions: {{A}} Multi-Perspective Proposal with a Focus on Management Education}, - author = {Figueir{\'o}, Paola Schmitt and Neutzling, Daiane M{\"u}lling and Lessa, Bruno}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {339}, - pages = {130539}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130539}, - urldate = {2022-02-09}, - abstract = {It is crucial to understand which conditions or elements are relevant to the development of more holistic and integrative models for implementing sustainability into Higher Education Institutions (HEIs). It is observed in the literature that there is a mismatch between the highlighted importance of education for sustainability and the actual implementation of its integration in HEIs due to its multifaceted characteristics and complexity. The proposition of analytical models can serve as a very useful tool for successful practical experiences. Therefore, the paper aims to develop a conceptual and analytical framework based on four interdependent dimensions\textemdash contextual, organizational, curricular, and pedagogical\textendash{} that can be used as a guide to integrate sustainability into critical areas in HEIs. We considered four crucial areas: university management, teaching, research, and community outreach. To validate and expand these areas and identify the elements composing them, we conducted a qualitative research based on systematic literature review and semi-structured interviews with experts in the field of higher and management education. We explored this integration of sustainability in the context of an emergent country, and for this we performed documental research and interviews with local experts. This study contributes to the field by presenting a multi-analytical model and their specific elements that can guide HEIs to effectively integrate sustainability into management education related to planning and action. Although the results focus on management courses, these elements, if properly adapted, can be used to map and analyze other courses in all types of HEI.} -} - -@article{fijalkowCrisesMallogementReflexions2013, - title = {{Crises et mal-logement : r\'eflexions sur la notion de \guillemotleft{} vuln\'erabilit\'e r\'esidentielle \guillemotright}}, - shorttitle = {{Crises et mal-logement}}, - author = {Fijalkow, Yankel}, - year = {2013}, - journal = {Revue des politiques sociales et familiales}, - volume = {114}, - number = {1}, - pages = {31--38}, - publisher = {{Pers\'ee - Portail des revues scientifiques en SHS}}, - doi = {10.3406/caf.2013.2950}, - urldate = {2023-02-15}, - abstract = {Le mal-logement est pr\'esent dans le discours politique depuis vingt ans. Les cinq facteurs qui le d\'efinissent sont l'absence de logement, les difficult\'es d'acc\`es, le manque de confort et l'insalubrit\'e, les difficult\'es de maintien, une mobilit\'e difficile. Dans ce cadre, la Fondation Abb\'e Pierre distingue le "nombre de personnes connaissant une probl\'ematique forte de mal-logement " (3,5 millions de personnes) et les "personnes en situation de r\'eelle fragilit\'e \`a court ou moyen terme" (6,6 millions de personnes). Cette d\'efinition est issue d'une longue \'evolution qui a conduit \`a s\'eparer les causes physiques du mal-logement de celles relevant des populations. Ainsi, les populations pauvres et pr\'ecaires sont consid\'er\'ees comme des acteurs \`a part enti\`ere, capables de strat\'egies propres par rapport aux dispositifs de l'Etat-providence. Mais l'observation de ces strat\'egies r\'ev\`ele surtout des situations r\'esidentielles pr\'ecaires (colocation, sous-location) qui questionnent la notion de "vuln\'erabilit\'e r\'esidentielle".}, - copyright = {free}, - langid = {fre}, - file = {/Users/fabio/Zotero/storage/TRILUPH2/Fijalkow - 2013 - Crises et mal-logement réflexions sur la notion .pdf} -} - -@article{fikselIndustrialEcologyNetwork2010, - title = {Industrial Ecology Network Optimization with Life Cycle Metrics}, - author = {Fiksel, Joseph and Bakshi, Bhavik}, - year = {2010}, - journal = {Proceedings of the 2010 IEEE International Symposium on Sustainable Systems and Technology, ISSST 2010}, - doi = {10.1109/ISSST.2010.5507698}, - urldate = {2021-09-20}, - abstract = {Industrial ecology suggests innovative pathways for re-use and recovery of waste streams, but efforts to establish ecoindustrial networks have encountered both technical and institutional barriers. To help overcome these challenges, an Industrial Ecosystem Toolkit has been developed to quantify how such collaborative networks can reduce costs, employ assets more efficiently, increase revenue, reduce risks, and conserve natural resources. The tools draw upon methods from network flow optimization modeling and environmental life cycle assessment, and enable real-time, interactive use by decision makers. Working with the U.S. Environmental Protection Agency, the U.S. Business Council for Sustainable Development, and other regional organizations, the Center for Resilience has applied these innovative tools to promote a systems approach based on sound science and informed decision-making. Future work will develop network models that represent synergies among industrial and ecological processes.}, - keywords = {By-product synergy,Industrial ecology,Life cycle assessment,Network optimization,Sustainable materials management,Waste recovery} -} - -@article{Filho2019, - title = {The Integration of Social Responsibility and Sustainability in Practice: {{Exploring}} Attitudes and Practices in {{Higher Education Institutions}}}, - author = {Filho, Walter Leal and Doni, Federica and Vargas, Valeria Ruiz and Wall, Tony and Hindley, Ann and {Rayman-Bacchus}, Lez and {Emblen-Perry}, Kay and Boddy, Jennifer and Avila, Lucas Viega}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {152--166}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.139} -} - -@article{Filho2019a, - title = {The Role of Green and {{Sustainability Offices}} in Fostering Sustainability Efforts at Higher Education Institutions}, - author = {Filho, Walter Leal and Will, Markus and Salvia, Amanda Lange and Adom{\ss}ent, Maik and Grahl, Anselm and Spira, Felix}, - year = {2019}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {232}, - pages = {1394--1401}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.273}, - urldate = {2020-05-21}, - abstract = {Green and Sustainability Offices are special settings which assist initiatives within higher education institutions to coordinate their efforts and work in the field of sustainable development. The set-up of such offices is known to be an effective tool in supporting the implementation of sustainability initiatives on campuses, and in fostering awareness among students and staff on matters related to sustainable development. But despite their usefulness and proven effectiveness, the use of Green Offices and Sustainability Offices is not as wide as it could -or should-be. Also, there is a limited amount of empirical international work performed to date, which have investigated the various barriers related to their works. This paper, which focus on the role played by green offices in a higher education context, addresses a research gap. On the basis of the need to address this research gap, this paper presents the results of an international study on Green and Sustainability Offices, performed with a sample of 70 higher education institutions from round the world. The study consisted of an on-line survey which identified the extent to which Green Offices or similar governance structures are being deployed, some specific aspects of their operations and the barriers or difficulties related to their activities. The study concludes by suggesting some topics higher education institutions may take into consideration, in order to maximise their potential benefits.}, - keywords = {Green offices,Sustainability management at universities} -} - -@article{Filho2021, - title = {An Assessment of Attitudes towards Plastics and Bioplastics in {{Europe}}}, - author = {Filho, Walter Leal and Salvia, Amanda Lange and Bonoli, Alessandra and Saari, Ulla A. and Voronova, Viktoria and Kl{\~o}ga, Marija and Kumbhar, Sonali Suraj and Olszewski, Katharina and De Quevedo, Daniela M{\"u}ller and Barbir, Jelena}, - year = {2021}, - month = feb, - journal = {Science of The Total Environment}, - volume = {755}, - pages = {142732}, - publisher = {{Elsevier}}, - issn = {00489697}, - doi = {10.1016/j.scitotenv.2020.142732}, - urldate = {2022-01-04}, - abstract = {Over the last 50 years, conventional fossil-based plastics have become an integral part of our everyday lives. Apart from their low production costs, this is due to a number of their unique properties, including durability, strength, lightness, electrical and thermal insulation, resistance to chemicals and corrosion. The production of plastics has increased from 1.5 million metric tons in 1950 to 359 million metric tons in 2018. Of this total, 61.8 million metric tons were produced in Europe. There are various problems associated with plastic use and disposal that pose a serious threat to both the physical environment and human health. Since public behaviour plays a key role when it comes to the use of plastic, this paper reports on a study that focused on an assessment of attitudes towards plastics and bioplastics in Europe. The results showed that packaging is the most frequent modality of plastic used among participants. In addition, majority of participants are aware that plastic waste can affect environment and human health and therefore segregate and properly dispose plastics. Also, even though most respondents were aware of the environmental problems related to plastic use and showed a positive inclination towards using bioplastic materials, their limited availability and lack of relevant information about bioplastics pose a problem for wider use. Departing from the assumption that the public attitude is a determining factor in the consumption of plastics as a whole and bioplastics in particular, this paper also sheds some light on the current situation, identifying some trends and information gaps which should be addressed in order to encourage a more rational use of plastics in Europe.}, - pmid = {33092843}, - keywords = {Assessment,Bioplastics,Environment,Europe,Plastics}, - file = {/Users/fabio/Zotero/storage/LIVKYSBY/full-text.pdf} -} - -@article{filhoMappingSustainabilityInitiatives2021, - title = {Mapping Sustainability Initiatives in Higher Education Institutions in {{Latin America}}}, - author = {Filho, Walter Leal and Amaro, Nelson and Avila, Lucas Veiga and Brandli, Luciana and Damke, Luana In{\^e}s and Vasconcelos, Claudio R.P. and {Hernandez-Diaz}, Paula M. and Frankenberger, Fernanda and Fritzen, B{\'a}rbara and Velazquez, Luis and Salvia, Amanda}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {315}, - pages = {128093}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128093}, - urldate = {2021-08-08}, - abstract = {Many higher education institutions (HEIs) around the world are involved in a variety of sustainability initiatives. These are acknowledged to be important elements in fostering the cause of sustainability in HEIs, in further developing the organizations' culture and in acting as enablers in the institutional embedding of sustainability. But despite the relevance of sustainability initiatives, there is a lack of systematic international efforts in how best to map them, especially in Latin America. On the basis of the need to address this gap, this paper reports on the results of an empirical study, aimed at analyzing the current status of sustainability initiatives among Latin American HEIs. Apart from a review of the latest literature, an international survey was performed to design a model using principal component analysis to identify the main descriptors of sustainability initiatives among Latin American HEIs and also the major drivers and challenges. The study sheds some light on the ways universities perceive and handle sustainability-related initiatives. The results show that sustainability is being incorporated in more than 80\% of the sampled universities, and that a special emphasis is being given to campus operations. The value of the paper resides on the fact that it one of the few papers that have holistically investigated trends in sustainable development across universities in Latin America. The implications of the study are twofold. It maps for the first time how sustainable development initiatives are being practiced in 157 universities in 13 countries, being one of the most comprehensive studies of its kind, and it also outlines some of the main challenges that universities in the region face. The central message of this paper is that the different levels of emphasis given to SD in Latin American universities need to be better understood in order to catalyze continued and long-term actions.}, - keywords = {Higher education,Latin America,Mapping,Sustainability initiatives} -} - -@article{findikIndustryEnablerCircular2023, - title = {Industry 4.0 as an Enabler of Circular Economy Practices: {{Evidence}} from {{European SMEs}}}, - shorttitle = {Industry 4.0 as an Enabler of Circular Economy Practices}, - author = {Findik, Derya and Tirgil, Abdullah and {\"O}zbu{\u g}day, Fatih Cemil}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {410}, - pages = {137281}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137281}, - urldate = {2023-05-01}, - abstract = {While firms' investment in Industry 4.0 and adoption of circular economy practices are seen as indispensable to a sustainable economy, synergies from the interaction of these two received less systematic empirical treatment. These synergies are particularly important in Europe, given that both the digital and the green transitions are Europe's strategic political priorities, and the ``twin'' transitions are expected to reinforce each other. By investigating the link between Industry 4.0 technologies and circular economy practices for European SMEs, which have an important place in the European economy and are responsible for a significant amount of waste, this study aims to uncover the potential of digital transition in supporting green transition. Using the ReSOLVE framework as the conceptual background, this paper examines the effect of Industry 4.0 technologies on SMEs' circular economy applications among EU countries using firm-level data from SMEs, Start-ups, Scale-ups, and Entrepreneurship (Flash Eurobarometer 486) Survey in 2020. The results of econometric analyses provide evidence of a statistically significant positive effect of Industry 4.0 technologies on circular economy practices. These findings imply that a key policy priority should be to plan to spread Industry 4.0 components to improve and enhance SMEs' circular economy practices. Overall, the results indicate that Industry 4.0 technologies serve not only Europe's digital and industrial strategies but also its environmental strategies.}, - langid = {english}, - keywords = {Circular economy,EU,Industry 4.0,SMEs}, - file = {/Users/fabio/Zotero/storage/F2IXYUAN/Findik et al_2023_Industry 4.pdf;/Users/fabio/Zotero/storage/47L3AZNC/S0959652623014397.html} -} - -@article{findrikDriversBarriersConsumers2023, - title = {Drivers and Barriers for Consumers Purchasing Bioplastics \textendash{} {{A}} Systematic Literature Review}, - author = {Findrik, Edina and Meixner, Oliver}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {410}, - pages = {137311}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137311}, - urldate = {2023-05-02}, - abstract = {Plastic pollution has adverse effects on the ecosystem and on the human body. Bioplastics might provide an alternative to plastic for environmentally friendly consumers. A systematic literature review was conducted to analyze and summarize the state of the art regarding consumers' response to bioplastics using a hierarchy of effects model. The model holistically represents the relevant steps in understanding consumers' journey from stimuli to the behavioral stage. The review was based on 67 scientific journal articles on consumer studies related to bioplastics published in English language (all peer-reviewed). Most studies researched bioplastic packaging applications e.g., food and beverage packaging using quantitative consumer surveys. Many studies focused on consumer preferences and willingness to pay for bioplastics, while awareness, knowledge, and post-purchase behavior\textemdash usage and disposal\textemdash was the least researched. Many of the studies applied text or oral and rarely real product stimuli. The results of the synthesis pointed out some purchasing barriers e.g. consumers' low knowledge about the environmental impact, characteristics such as material source or end-of-life character of bioplastics; or consumers' uncertainty about bioplastic recognition versus conventional plastics. Drivers of consumers' purchasing bioplastics are also identified, for instance consumers' positive attitude, available product information or consumers' green value. Bioplastic products meeting consumers' preferences such as low price, biogenic resource base, and local origin also act as purchasing drivers. Studies also found that bioplastic related information of a product influences consumers' willingness to pay. The review revealed research gaps, highlighting in particular the need for cross-cultural studies, non-hypothetical research designs and the analysis of labelling systems related to bioplastic products.}, - langid = {english}, - keywords = {Bioplastics,Consumer,Purchasing,Systematic review}, - file = {/Users/fabio/Zotero/storage/8NDYSRQW/Findrik_Meixner_2023_Drivers and barriers for consumers purchasing bioplastics – A systematic.pdf;/Users/fabio/Zotero/storage/B55LAMIX/S0959652623014695.html} -} - -@misc{Finisdore2021, - title = {Letter to the Editor: {{Using}} Classification Systems to Integrate Ecosystem Services with Decision Making Tools}, - author = {Finisdore, John and Lamothe, Karl A. and Rhodes, Charles R. and Obst, Carl and Booth, Pieter and {Haines-Young}, Roy and Russell, Marc and Houdet, Joel Robert and Maynard, Simone and Wielgus, Jeffrey and Rowcroft, Petrina}, - year = {2021}, - month = apr, - journal = {Ecosystem Services}, - volume = {48}, - pages = {101257}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - urldate = {2021-04-21}, - abstract = {Mustajoki et al. https://doi.org/10.1016/j.ecoser.2019.101049 provided a valuable application of ecosystem services (ES) classification approaches to inform multi-criteria decision making analysis (MCDA) value trees. The exercise identified potential pitfalls of applying ES classification systems to MCDA and offered solutions by making adjustments to the value tree. The potential pitfalls included difficulty in narrowing down important ES, the lack of accounting for indirect benefits, and double counting. These pitfalls could also have been addressed, perhaps more efficiently, within the identification of ES before being placed into value trees. Broad use of this careful ES identification would improve their use in many decision making tools and applications. ES classification approaches have developed from simple ES categories presented by the Millennium Ecosystem Assessment (MA) and The Economics of Ecosystems \& Biodiversity (TEEB) to the present-day hierarchical classification systems of Common International Classification of Ecosystem Services (CICES) and the National Ecosystem Services Classification System Plus (NESCS). The MA brought classification science to the ES field by defining the supporting, regulating, provisioning, and cultural ES categories. The MA also warned that "These categories overlap extensively, and the purpose is not to establish a taxonomy but rather to ensure that the analysis addresses the entire range of services" (MA 2003, p. 38 in Finisdore et al. 2020). The MA authors were aware that classification systems must be complete, mutually exclusive, consistent, relevant to users' needs, stable through time, comparable to other classification systems, flexible, and include a vocabulary and thesaurus (Finisdore et al., 2020). TEEB recognized some of the overlap among the MA categories and the risks of double counting it engenders, noting that ES differ from economic benefits. CICES built on this observation by seeking to eliminate ecological processes as ES, while developing the first hierarchy of ES. The hierarchy was enabled by the final ecosystem services (FES) concept. FES are the point where a product transitions from being predominately ecological to being predominately economic, and directly used or appreciated by humans (Boyd and Banzhaf, 2007). For example, consider that for fish to make it to market, a boat, fishing supplies, fuel, and labor are typically needed. The transition occurs with the application of manmade capital that allows the fish to be caught. The transition point is ultimately determined by who is using the product. To the fisher, fish available for harvest is the FES, whereas to a SCUBA diver, it is fish available for recreational viewing (Finisdore et al. 2020). FES allow CICES and NESCS to differentiate between ecological processes and economic benefits, and therefore reduce the chance of double counting. Using CICES or NESCS Plus to identify FES includes the identification of users or user groups of the ecological end product provided by the ecosystem (e.g., fish for fishers). The process of identifying the user group and the ecological end product simultaneously helps narrow the list of important FES for an analysis. For example, only in a follow-up exercise to the one described in Mustajoki et al. were the lack of berry pickers (user group) in the target peatlands identified (Saarikoski et al., 2019). Moreover, there are benefits to identifying less important FES to any one study, as it can inform future studies. Another advantage of careful ES identification is knowing which items are not FES. Peat extraction, for example, is not considered by most to be an ES because the regeneration time required to restore its ability to be used for recreation or berry picking is multigenerational. Mustajoki et al. recognizes this, but still identified peat extraction as an ES because of its importance to the study. Mustajoki et al. would likely have placed it into a separate branch of the MCDA value tree early on if peat extraction was identified consistently with the ES classification system. Similarly, CICES and NESCS Plus do not include indirect benefits in order to reduce double counting. A value tree, like the one described in Mustajoki et al., could have placed these indirect benefits in a separate branch from the start. The ubiquitous use of the terms 'provisioning,' 'regulating,' 'cultural', and 'supporting' in the ES literature over the last two decades demonstrates how the MA categories unified thinking and language. As the field has developed, the flexibility and iterations of classification systems have been identified as ideal means for not only codifying existing ES knowledge, but also for incorporating new learning and spreading it across the ES field. Furthering the application of ES requires careful use of the term 'ES classification systems' and better engagement with their custodians to keep them updated and to address novel applications.}, - file = {/Users/fabio/Zotero/storage/I45CHQ3Q/Unknown - 2021 - Letter to the editor Using classification systems to integrate ecosystem services with decision making tools.pdf} -} - -@article{finsterBenefitsOrganizationsPursue2014, - title = {Benefits {{Organizations Pursue}} When {{Seeking Competitive Advantage}} by {{Improving Environmental Performance}}}, - author = {Finster, Mark P. and Hernke, Michael T.}, - year = {2014}, - month = oct, - journal = {Journal of Industrial Ecology}, - volume = {18}, - number = {5}, - pages = {652--662}, - publisher = {{Blackwell Publishing}}, - issn = {10881980}, - doi = {10.1111/jiec.12106}, - urldate = {2021-03-29}, - abstract = {Organizations cognitive of the strategic risk and opportunities associated with environmental challenges may employ industrial ecology (IE) concepts, methods, and tools to develop capabilities that both enhance environmental performance and provide competitive benefits. We introduce a typology of strategic benefits related to competitive advantage that are enabled by improved environmental performance. Industry examples illustrate how organizations embed IE concepts and methods into systems to generate capabilities that deliver these benefits and configure them for competitive advantage. The examples demonstrate the idiosyncratic, path-dependent nature of capability development that helps sustain advantage, especially when competitors lack cognition of the global scope of the challenge, and the risks and benefits involved.}, - keywords = {Business strategy,Eco-cognition,Environmental strategy,Industrial ecology,Organizational theory,Strategic management} -} - -@article{fioramontiWellbeingEconomyEffective2022, - title = {Wellbeing Economy: {{An}} Effective Paradigm to Mainstream Post-Growth Policies?}, - author = {Fioramonti, Lorenzo and Coscieme, Luca and Costanza, Robert and Kubiszewski, Ida and Trebeck, Katherine and Wallis, Stewart and Roberts, Debra and Mortensen, Lars F. and Pickett, Kate E. and Wilkinson, Richard and Ragnarsdott{\'i}r, Krist{\'i}n Vala and McGlade, Jacqueline and Lovins, Hunter and De Vogli, Roberto}, - year = {2022}, - month = feb, - journal = {Ecological Economics}, - volume = {192}, - pages = {107261}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107261}, - urldate = {2021-11-07} -} - -@article{Fischer2021, - title = {Sustainable Consumption Communication: {{A}} Review of an Emerging Field of Research}, - author = {Fischer, Daniel and Reinermann, Julia-Lena and Guillen Mandujano, Georgina and DesRoches, C. Tyler and Diddi, Sonali and Vergragt, Philip J.}, - year = {2021}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {300}, - pages = {126880}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126880}, - urldate = {2021-04-29}, - abstract = {Communication plays an important role in promoting sustainable consumption. Yet how the academic literature conceptualizes and relates communication and sustainable consumption remains poorly understood, despite growing research on communication in the context of sustainable consumption. This article presents the first comprehensive review of sustainable consumption communication (SCC) research as a young and evolving field of scholarly work. Through a systematic review and narrative synthesis of N = 67 peer-reviewed journal articles, we consolidated the research conducted in this field into four distinct types: communication as an approach to (1) behavior change, (2) self-empowerment, (3) systems change, and (4) reflection on current discourses and practices around sustainable consumption. Our findings reveal that most journal articles focus on incremental changes in individual consumer behavior (``weak'' sustainable consumption) and employ communication as an intervention tool with little reference to communication science and theory. They also reveal integration challenges arising from the disciplinary diversity and fragmentation characteristic of the research field. Future research should develop shared frameworks and terminology, diversify its foci, synthesize relevant evidence, and innovate critical perspectives that go beyond one-way business-to-consumer communication. The results of our review can serve researchers engaged in sustainable consumption communication to better systematize their efforts and contribute more effectively to changing systems of consumption in the future.}, - keywords = {Communication,Consumer behavior,Consumer communication,Marketing,Narrative synthesis,SDG12,Sustainable consumption,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/CXTTPX4P/full-text.pdf} -} - -@article{fischerImportanceActorsAgency2016, - title = {Importance of Actors and Agency in Sustainability Transitions: {{A}} Systematic Exploration of the Literature}, - author = {Fischer, Lisa Britt and Newig, Jens}, - year = {2016}, - journal = {Sustainability (Switzerland)}, - volume = {8}, - number = {5}, - publisher = {{MDPI}}, - issn = {20711050}, - doi = {10.3390/SU8050476}, - urldate = {2022-03-13}, - abstract = {This article explores the role of actors and agency in the literature on sustainability transitions. We reviewed 386 journal articles on transition management and sustainability transitions listed in Scopus from 1995 to 2014. We investigate the thesis that actors have been neglected in this literature in favor of more abstract system concepts. Results show that this thesis cannot be confirmed on a general level. Rather, we find a variety of different approaches, depending on the systemic level, for clustering actors and agency as niche, regime, and landscape actors; the societal realm; different levels of governance; and intermediaries. We also differentiate between supporting and opposing actors. We find that actor roles in transitions are erratic, since their roles can change over the course of time, and that actors can belong to different categories. We conclude by providing recommendations for a comprehensive typology of actors in sustainability transitions.}, - keywords = {Actor typology,Agency,Sustainability,Transitions} -} - -@article{fischerImprovingInnerStructure2022, - title = {Improving Inner Structure and Properties of Additive Manufactured Amorphous Plastic Parts: {{The}} Effects of Extrusion Nozzle Diameter and Layer Height}, - author = {Fischer, Dirk and E{\ss}bach, Claudia and Sch{\"o}nherr, Robert and Dietrich, Dagmar and Nickel, Daniela}, - year = {2022}, - month = mar, - journal = {Additive Manufacturing}, - volume = {51}, - pages = {102596}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102596}, - urldate = {2022-01-25} -} - -@incollection{Fisher2004, - title = {Plastics {{Recycling}}}, - booktitle = {Plastics and the {{Environment}}}, - author = {Fisher, Michael M.}, - year = {2004}, - month = nov, - pages = {563--627}, - publisher = {{John Wiley \& Sons, Inc.}}, - address = {{Hoboken, NJ, USA}}, - doi = {10.1002/0471721557.ch14} -} - -@article{Fisher2015, - title = {Open Hardware: {{A}} Role to Play in Wireless Sensor Networks?}, - author = {Fisher, Roy and Ledwaba, Lehlogonolo and Hancke, Gerhard and Kruger, Carel}, - year = {2015}, - month = mar, - journal = {Sensors}, - volume = {15}, - number = {3}, - pages = {6818--6844}, - issn = {1424-8220}, - doi = {10.3390/s150306818} -} - -@article{fisherDefiningClassifyingEcosystem2009, - title = {Defining and Classifying Ecosystem Services for Decision Making}, - author = {Fisher, Brendan and Turner, R. Kerry and Morling, Paul}, - year = {2009}, - month = jan, - journal = {Ecological Economics}, - volume = {68}, - number = {3}, - pages = {643--653}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2008.09.014}, - urldate = {2021-04-23}, - abstract = {The concept of ecosystems services has become an important model for linking the functioning of ecosystems to human welfare. Understanding this link is critical for a wide-range of decision-making contexts. While there have been several attempts to come up with a classification scheme for ecosystem services, there has not been an agreed upon, meaningful and consistent definition for ecosystem services. In this paper we offer a definition of ecosystem services that is likely to be operational for ecosystem service research and several classification schemes. We argue that any attempt at classifying ecosystem services should be based on both the characteristics of the ecosystems of interest and a decision context for which the concept of ecosystem services is being mobilized. Because of this there is not one classification scheme that will be adequate for the many contexts in which ecosystem service research may be utilized. We discuss several examples of how classification schemes will be a function of both ecosystem and ecosystem service characteristics and the decision-making context. \textcopyright{} 2008 Elsevier B.V. All rights reserved.}, - keywords = {Ecosystem benefits,Ecosystem services,Environmental decision making,Human welfare,Millennium Assessment} -} - -@article{fisherEcosystemServicesClassification2008, - title = {Ecosystem Services: {{Classification}} for Valuation}, - author = {Fisher, Brendan and Kerry Turner, R.}, - year = {2008}, - month = may, - journal = {Biological Conservation}, - volume = {141}, - number = {5}, - pages = {1167--1169}, - publisher = {{Elsevier}}, - issn = {00063207}, - doi = {10.1016/j.biocon.2008.02.019}, - urldate = {2021-04-23}, - abstract = {This letter is in response to an article by Ken Wallace titled "Classifications of ecosystem services: problems and solutions" (Biological Conservation 139, 2007). This letter discusses the points we see as problematic with Wallace's framework and sets out our conceptualization of linking ecosystem services with human welfare. In this letter we suggest that utilizing the terms intermediate services, final services and benefits should go a long way to clearing up much of the ambiguity in ecosystem services typologies, especially for economic valuation purposes. As Wallace points out, clearly defining and organizing the concept of ecosystem services is not just a semantic decision, but it is integral to operationalizing something that can clearly illuminate tradeoffs in natural resource management. \textcopyright{} 2008 Elsevier Ltd. All rights reserved.}, - keywords = {Conservation,Ecosystem services,Human welfare,Millennium assessment} -} - -@article{fissiPathSustainableGreen2021, - title = {The Path toward a Sustainable Green University: {{The}} Case of the {{University}} of {{Florence}}}, - author = {Fissi, Silvia and Romolini, Alberto and Gori, Elena and Contri, Marco}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {279}, - pages = {123655}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123655}, - urldate = {2020-08-24} -} - -@article{Fitzharris2018, - title = {Effects of Material Properties on Warpage in Fused Deposition Modeling Parts}, - author = {Fitzharris, Emily R. and Watanabe, Narumi and Rosen, David W. and Shofner, Meisha L.}, - year = {2018}, - month = mar, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {95}, - number = {5-8}, - pages = {2059--2070}, - issn = {0268-3768}, - doi = {10.1007/s00170-017-1340-8} -} - -@article{Fleischmann2016, - title = {Making Things in {{Fab Labs}}: A Case Study on Sustainability and Co-Creation}, - author = {Fleischmann, Katja and Hielscher, Sabine and Merritt, Timothy}, - year = {2016}, - journal = {Digital Creativity}, - volume = {27}, - number = {2}, - pages = {113--131}, - publisher = {{Taylor \& Francis}}, - issn = {17443806}, - doi = {10.1080/14626268.2015.1135809}, - abstract = {Digital fabrication laboratories (such as Fab Labs) are a global initiative of workshops that offer open access to technologies to produce objects from beginning idea to final production. Fab Labs encourage open and free knowledge-sharing among `experts' and the general public. Claims are being made about community-based digital fabrication workshops transforming practices of design, innovation, production and consumption, while describing positive impacts on the environment and social goals. Research that examines such claims is sparse. This paper explores realities of using digital fabrication technologies within a Fab Lab. It draws on a case study that describes practical outcomes of a design workshop in which a multidisciplinary team engaged in issues of sustainable design and processes of co-creation to design and fabricate a prototype. This experience provides insight into the impact of digital fabrication technologies within a sustainable and co-creational design context and critical reflections are presented.}, - keywords = {co-creation,digital fabrication technologies,Fab Lab,sustainability}, - file = {/Users/fabio/Zotero/storage/I4HQWX92/Making things in Fab Labs- a case study on sustainability and co-creation.pdf} -} - -@article{fleithdemedeirosSuccessFactorsEnvironmentally2022, - title = {Success Factors for Environmentally Sustainable Product Innovation: {{An}} Updated Review}, - author = {{Fleith de Medeiros}, Janine and Bisognin Garlet, Ta{\'i}s and Duarte Ribeiro, Jose Luis and Nogueira Cortimiglia, Marcelo}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {345}, - pages = {131039}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131039}, - urldate = {2022-03-14} -} - -@article{fletcherFrameworkAssessingCircularity2021, - title = {A Framework for Assessing the Circularity and Technological Maturity of Plastic Waste Management Strategies in Hospitals}, - author = {Fletcher, C.A. and St. Clair, R. and Sharmina, M.}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {127169}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127169}, - urldate = {2021-04-29} -} - -@article{floodImaginingClimateResilient2023, - title = {Imagining Climate Resilient Futures: {{A}} Layered {{Delphi}} Panel Approach}, - shorttitle = {Imagining Climate Resilient Futures}, - author = {Flood, Stephen and Rogan, Fionn and Revez, Alexandra and McGookin, Connor and O'Dwyer, Barry and Harris, Clodagh and Dunphy, Niall and Byrne, Edmond and Gallach{\'o}ir, Brian {\'O} and Bolger, Paul and Boyle, Evan and Glynn, James and Barry, John and Ellis, Geraint and Mullally, Gerard}, - year = {2023}, - month = mar, - journal = {Futures}, - volume = {147}, - pages = {103100}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2023.103100}, - urldate = {2023-02-12}, - abstract = {This paper in using a novel application of the Delphi panel method, explores and consolidates the future visions of a low carbon and climate resilient future in Ireland through community-based visioning processes that emerged through co-created, deliberative approaches at local level. It embraces a visioning process that applies a transdisciplinary approach, which aims to match different visions and stakeholder needs, combining bottom-up and top-down perspectives. Community visions were articulated by means of a series of deliberative futures workshops facilitated by the transdisciplinary project research team. Through iterations of the Delphi feedback loop, the notion of deep and shallow agreement is explored to examine the spectrum of consensus to dissent around the co-developed future visions and pathways of climate action, articulated by the Irish community case study. This approach enables a critical exploration of the conventional science-policy-practice nexus through the use of innovative creative communication and engagement methods. Findings suggest that more deliberative forums which bring together a diverse range of stakeholders are needed to develop a shared vision for the future; the importance of language use and the creation of a shared vocabulary of climate action; and the power of civic imaginaries in helping to create useful future narratives.}, - langid = {english}, - keywords = {Community visioning,Convergence and divergence,Delphi panel,Societal transitions,Transdisciplinary}, - file = {/Users/fabio/Zotero/storage/CXL2CZJZ/Flood et al_2023_Imagining climate resilient futures.pdf;/Users/fabio/Zotero/storage/6RMRYF8P/S0016328723000046.html} -} - -@article{floorTensileStrength3D2018, - title = {Tensile Strength of {{3D}} Printed Materials: {{Review}} and Reassessment of Test Parameters}, - author = {Floor, Jim and {van Deursen}, Bas and Tempelman, Erik}, - year = {2018}, - month = jul, - journal = {Materials Testing}, - volume = {60}, - number = {7-8}, - pages = {679--686}, - publisher = {{Carl Hanser Verlag}}, - issn = {0025-5300}, - doi = {10.3139/120.111203}, - urldate = {2021-02-16}, - abstract = {3D printing, using material extrusion (a.k.a. FDM), is increasingly used for final parts, and not only prototypes. This increases research into printed material strength. For such research to be reproducible, many parameters must be controlled. Assessed here are several such parameters currently underappreciated in the literature: variation between printers, printing toolpath, void content, and bed placement. Through systematic testing (n = 780), the first three parameters are proven to be statistically significant. With these controls, the effect of layer height, print speed, nozzle temperature, and print orientation on strength as previously reported is accurately reproduced, and contradictory prior results regarding print orientation are explained. A single material was used: polylactic acid, benchmarked by injection molding and testing of specimens with comparable geometry to the printed specimens.}, - keywords = {3D printing,FDM,Material extrusion,Mechanical properties,PLA,Tensile strength,Test parameters} -} - -@article{Florez2019, - title = {Is Technology (Still) Applied Science?}, - author = {Florez, Daian and {Garc{\'i}a-Duque}, Carlos Emilio and Osorio, Juan Camilo}, - year = {2019}, - month = nov, - journal = {Technology in Society}, - volume = {59}, - pages = {101193}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.101193} -} - -@article{Flostrand2020, - title = {The {{Delphi}} Technique in Forecasting\textendash{} {{A}} 42-Year Bibliographic Analysis (1975\textendash 2017)}, - author = {Flostrand, Andrew and Pitt, Leyland and Bridson, Shannon}, - year = {2020}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {150}, - pages = {119773}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119773} -} - -@article{Flynn2019, - title = {Setting Standards for a Circular Economy: {{A}} Challenge Too Far for Neoliberal Environmental Governance?}, - author = {Flynn, Andrew and Hacking, Nick}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {1256--1267}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.11.257}, - urldate = {2020-03-21}, - abstract = {National and regional governments around the world are steering actors in the waste and resources management industry towards a more circular economy (CE). Such a hoped-for transition is set against a backdrop of neoliberal environmental governance. The private sector increasingly delivers outcomes via public-private initiatives. Similarly, voluntary quality assurance standards covering flows of waste and resources around the globe are increasingly central to markets and trade. The role of standards in contemporary environmental governance is critically reassessed by examining how they are involved in the upscaling or down-scaling of markets. This analysis matters to understanding how the CE is conceptualised at a range of scales and how neoliberal environmental governance can help or hinder CE development. To overcome the paucity of data on how and why public and private sector actors set and use voluntary standards for material flows, twenty-eight key actor interviews with those involved in standard setting and the CE in Europe are drawn upon. Results suggest that proponents of standards and the CE see the raising of the quality of recycled material as central to building up confidence and trust in existing and emerging markets. However, others suggest markets will always privilege cost over quality and that standards are peripheral. For the CE transition to accelerate, this research suggests that policy instruments like standards need to challenge existing neoliberal market relations rather than simply follow them.}, - keywords = {Circular economy,Governance,Neoliberalism,Resources,Standards,Waste} -} - -@article{Flynn2019a, - title = {Governance of the Circular Economy: {{A}} Comparative Examination of the Use of Standards by {{China}} and the {{United Kingdom}}}, - author = {Flynn, Andrew and Hacking, Nick and Xie, Linjun}, - year = {2019}, - month = nov, - journal = {Environmental Innovation and Societal Transitions}, - volume = {33}, - pages = {282--300}, - publisher = {{Elsevier B.V.}}, - issn = {22104224}, - doi = {10.1016/j.eist.2019.08.002}, - urldate = {2020-03-21}, - abstract = {Wastes, like other materials, have become increasingly global in their flows. The circular economy (CE) is a multi-level sustainability transition linked to the global trade in waste. China has long been a key trading partner for the West's waste materials. However, its rethinking of the quality of traded recyclable materials has triggered a crisis in the global governance of waste flows. We utilise a Sociology of Knowledge approach to undertake comparative work to better understand how different governance arrangements may facilitate or constrain the unfolding of a CE transition. The UK and China were selected as models of liberal and authoritarian environmental governance respectively. A mixed-method approach was pursued using qualitative interviews with key stakeholders and analysis of quantitative and qualitative data from secondary sources. Thematic analysis is organised around: perceptions of the circular economy, meanings of standards, and perspectives on trade and materials.}, - keywords = {China,Circular economy,Governance,Standards,Sustainability transition,UK} -} - -@inproceedings{Fodrang1996, - title = {Mechanical and Dimensional Characteristics of Fused Deposition Modeling Build Styles}, - booktitle = {Solid {{Freeform Fabrication Proceedings}}}, - author = {Fodrang, Eric and Koch, Martin and Menon, Unny}, - year = {1996}, - pages = {419--442}, - file = {/Users/fabio/Zotero/storage/39TXWZC4/Fodrang, Koch, Menon - 1996 - Mechanical and dimensional characteristics of fused deposition modeling build styles.pdf} -} - -@article{foggiaDriversMunicipalSolid2020, - title = {Drivers of Municipal Solid Waste Management Cost Based on Cost Models Inherent to Sorted and Unsorted Waste}, - author = {Foggia, Giacomo Di and Beccarello, Massimo}, - year = {2020}, - month = aug, - journal = {Waste Management}, - volume = {114}, - pages = {202--214}, - publisher = {{Elsevier Ltd}}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2020.07.012}, - urldate = {2020-07-20}, - abstract = {After having divided waste management cost in its cost items, we focus on how well-known exogenous and endogenous drivers impact on such cost items. To this end, we collected empirical data of 6,616 Italian municipalities for a two-year period. We develop four regression-based models to analyze the data according to cost items. Models are also reiterated using different data normalization: cost per ton of waste or waste per capita. Besides exogenous determiners of cost, such as altitude, population density, and coastal zone, results refer to both unsorted and sorted waste management cost items. In this respect economies of scale are confirmed along with the critical role of adequate waste facilities that play a remarkable role in cost minimization. Policymakers and regulators may benefit from such results when it comes to define allowed revenues and design the scope of municipal solid waste regulation.}, - keywords = {municipal solid waste} -} - -@article{fogtjacobsenDriversBarriersConsumers2022, - title = {Drivers of and Barriers to Consumers' Plastic Packaging Waste Avoidance and Recycling \textendash{} {{A}} Systematic Literature Review}, - author = {Fogt Jacobsen, Lina and Pedersen, Susanne and Th{\o}gersen, John}, - year = {2022}, - month = mar, - journal = {Waste Management}, - volume = {141}, - pages = {63--78}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.01.021}, - urldate = {2022-02-09} -} - -@article{Følstad2008, - title = {Living {{Labs}} for Innovation and Development of Information and Communication Technology: A Literature Review}, - author = {F{\o}lstad, Asbj{\o}rn}, - year = {2008}, - journal = {The Electronic Journal of Virtual Organizations and Networks}, - volume = {10}, - number = {August}, - pages = {99--131}, - abstract = {Living Labs are environments for involving users in innovation and development, and are regarded as a way of meeting the innovation challenges faced by information and communication technology (ICT) service providers. Living Labs have thus generated a great deal of interest in the field of ICT in the course of the last few years. However, the current body of Living Lab research literature indicates a lack of common understanding of how Living Labs can be used for ICT innovation and development. Moreover, there appears to be little agreement regarding needed future research. In order to establish a basis for future work on Living Labs, a review of the Living Lab literature related to ICT innovation and development has been carried out. Literature searches were made in four academic archives, as well as the ISI Web of Knowledge, Google and Google Scholar. Thirty-two relevant academic papers were retrieved. An overview of the literature was established and the literature was analyzed with regard to (1) common and diverging perspectives on Living Labs, (2) the state-of-the-art of Living Lab processes and methods, and (3) theoretical foundations of Living Labs. On the basis of the analyses, a common Living Lab definition is suggested. Two emerging Living Lab trends, as well as a pressing need for future research on Living Lab processes and methods, are introduced and discussed.}, - keywords = {0,2008 ejov,3,and,article distributed under the,attribution license,by-nd,commons,copyright,creativecommons,http,ict,information and communication technology,innovation and development,licenses,literature review,living labs,org,terms of the creative,this is an open-access,which permits unrestricted use} -} - -@article{Folstad2008e, - title = {Towards a {{Living Lab}} for the Development of Online Community Services}, - author = {Folstad, Asbjorn}, - year = {2008}, - journal = {The Electronic Journal for Virtual Organizations and Networks}, - volume = {10}, - pages = {47--58} -} - -@article{Fonrouge2018, - title = {Les Fablabs et l'\'emergence de Figures Alternatives de l'entrepreneur}, - author = {Fonrouge, C{\'e}cile}, - year = {2018}, - journal = {Projectics / Proy\'ectica / Projectique}, - volume = {19}, - number = {1}, - pages = {41}, - issn = {2031-9703}, - doi = {10.3917/proj.019.0041}, - abstract = {Les fablabs sont des lieux ouverts de fabrication et d\&\#8217;exp\&\#233;rimentation. Ils utilisent des machines \&\#224; commandes num\&\#233;riques. Si des recherches r\&\#233;centes venant d\&\#8217;horizons disciplinaires diff\&\#233;rents commencent \&\#224; documenter ces lieux en expansion, peu d\&\#8217;auteurs se sont demand\&\#233; \&\#224; qui s\&\#8217;adresse r\&\#233;ellement ces nouveaux espaces cr\&\#233;atifs. Nous proposons de d\&\#233;finir les fablabs par rapport aux structures existantes d\&\#8217;accompagnement dans 6\&\#160;recherches r\&\#233;centes. Les r\&\#233;sultats montrent la faible occurrence du mot \&\#171;\&\#160;entrepreneur\&\#160;\&\#187;. Cela s\&\#8217;expliquerait par l\&\#8217;\&\#233;mergence des figures moins classiques de l\&\#8217;entrepreneur comme l\&\#8217;entrepreneur hybride et ind\&\#233;pendant. Cette nouvelle r\&\#233;alit\&\#233; (re)met en avant la dimension subversive de l\&\#8217;entrepreneuriat. En bref, l\&\#8217;entrepreneur dans les fablabs n\&\#8217;est pas celui que l\&\#8217;on croit et ne fait pas ce que l\&\#8217;on attend.}, - isbn = {9782807392366}, - file = {/Users/fabio/Zotero/storage/VSRXD9W7/PROJ_019_0041.pdf} -} - -@article{Fonseca2018, - title = {Trends in Design of Distributed Energy Systems Using Hydrogen as Energy Vector: {{A}} Systematic Literature Review}, - author = {Fonseca, Juan D and Camargo, Mauricio and Commenge, Jean Marc and Falk, Laurent and Gil, Iv{\'a}n D.}, - year = {2019}, - journal = {International Journal of Hydrogen Energy}, - pages = {9486--9504}, - issn = {03603199}, - doi = {10.1016/j.ijhydene.2018.09.177}, - urldate = {2021-01-19}, - abstract = {Currently, a significant transformation for energy systems has emerged as a result of the trend to develop an energy framework without fossil fuel reliance, the concerns about climate change and air quality, and the need to provide electricity to around of 17\% of world population who lacks the service. Accordingly, the deployment of power plants located close to end-users and including multiple energy sources and carriers, along with the growing share of renewable energies, have suggested changes in the energy sector. Despite their potential capabilities, the design of distributed energy systems (DES) is a complex problem due to the simultaneous goals and constraints that need to be considered, as well as to the high context dependence of this kind of projects. For these reasons, in this work a systematic literature review of DES including hydrogen as energy vector, was made analyzing 106 research papers published between the years 2000\textendash 2018, and extracted from Scopus \textregistered{} and Web of Science databases. The aim was to identify how hydrogen is employed (technologies, uses) and the criteria that are evaluated (economic, technical, social and environmental) when these systems are designed, planned and/or operated. The results constitute a baseline information covering the type of technologies, equipment sizes and hydrogen applications, that could be valuable for the preliminary stages of research or project planning of DES involving hydrogen. Furthermore, other factors have also been identified, such as the focus on techno-economic issues, and the lack of considering socio/political aspects and the uncertainty about input data like weather conditions, energy prices and demands. Additionally, a more integrated approach is needed including all the hydrogen supply chain stages and project stakeholders, to tackle issues like safety of the energy systems that could produce consumer rejections.}, - keywords = {Decarbonization,Decentralized energy system,Energy carrier,Hydrogen,Power-to-gas,Renewable sources}, - file = {/Users/fabio/Zotero/storage/QXRAKQPR/full-text.pdf} -} - -@article{fontanaInterdisciplinarityDilemmaPublic2022, - ids = {fontana2022a}, - title = {The Interdisciplinarity Dilemma: {{Public}} versus Private Interests}, - author = {Fontana, Magda and Iori, Martina and Leone Sciabolazza, Valerio and Souza, Daniel}, - year = {2022}, - month = sep, - journal = {Research Policy}, - volume = {51}, - number = {7}, - pages = {104553}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2022.104553}, - urldate = {2022-05-30} -} - -@article{fontanaNewAtypicalCombinations2020, - title = {New and Atypical Combinations: {{An}} Assessment of Novelty and Interdisciplinarity}, - author = {Fontana, Magda and Iori, Martina and Montobbio, Fabio and Sinatra, Roberta}, - year = {2020}, - month = sep, - journal = {Research Policy}, - volume = {49}, - number = {7}, - pages = {104063}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104063}, - urldate = {2020-07-20}, - abstract = {Novelty indicators are increasingly important for science policy. This paper challenges the indicators of novelty as an atypical combination of knowledge (Uzzi et al., 2013) and as the first appearance of a knowledge combination (Wang et al., 2017). We exploit a sample of 230,854 articles (1985 - 2005), published on 8 journals of the American Physical Society (APS) and 2.4 million citations to test the indicators using (i) a Configuration Null Model, (ii) an external validation set of articles related to Nobel Prize winning researches and APS Milestones, (iii) a set of established interdisciplinarity indicators, and (iv) the relationship with the articles' impact. We find that novelty as the first appearance of a knowledge combination captures the key structural properties of the citation network and finds it difficult to tell novel and non-novel articles apart, while novelty as an atypical combination of knowledge overlaps with interdisciplinarity. We suggest that the policy evidence derived from these measures should be reassessed.}, - keywords = {Impact,Indicator,Interdisciplinarity,Novelty,Physics} -} - -@article{fontvivancoReboundEffectSustainability2022, - title = {Rebound Effect and Sustainability Science: {{A}} Review}, - shorttitle = {Rebound Effect and Sustainability Science}, - author = {Font Vivanco, David and {Freire-Gonz{\'a}lez}, Jaume and Galvin, Ray and Santarius, Tilman and Walnum, Hans Jakob and Makov, Tamar and Sala, Serenella}, - year = {2022}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13295}, - urldate = {2022-08-11}, - abstract = {Rebound effects have been historically studied through narrow framings which may overlook the complexity of sustainability challenges, sometimes leading to badly informed conclusions and policy recommendations. Here we present a critical literature review of rebound effects in the context of sustainability science in order to (1) map existing rebound research which goes beyond mainstream approaches, (2) unveil and classify current knowledge gaps in relation to sustainability science, (3) outline a research agenda, and (4) provide a knowledge base to support the design of effective policies toward sustainable development. We analyzed the literature in accordance with seven criteria for sustainable assessment: boundary orientedness, comprehensiveness, integratedness, stakeholder involvement, scalability, strategicness, and transparency. Our review identified three main issues: (1) the failure to address the multidimensionality of rebound effects, whereby both negative and positive outcomes may arise simultaneously, (2) the shift toward absolute rebound metrics which enables the contextualization of its effect with respect to science and policy goals, and (3) a general lack of attention to behavioral effects. We conclude that addressing these issues will help rebound research gain explanatory power and relevance for key decision-makers. We envision that with better alignment with sustainability science, future rebound research could help elucidate trade-offs in policies, including why certain strategies such as those based on the circular economy might fall short of expectations, and why achieving key goals and targets such as the sustainable development goals is so challenging. This knowledge is crucial for promoting a prioritization of actions and a concrete transition toward sustainability.}, - copyright = {\textcopyright{} 2022 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of International Society for Industrial Ecology.}, - langid = {english}, - keywords = {circular economy,industrial ecology,literature review,rebound effect,sustainability science,sustainable development goals}, - file = {/Users/fabio/Zotero/storage/HA5WATAL/Font Vivanco et al_Rebound effect and sustainability science.pdf;/Users/fabio/Zotero/storage/TF8B9Y8J/jiec.html} -} - -@misc{Forbes2020, - title = {Significant {{3D Printing Forecast Surges To}} \$35.6 {{Billion}}}, - author = {McCue, {\relax TJ}}, - year = {2019}, - journal = {Forbes}, - urldate = {2021-02-23}, - howpublished = {https://www.forbes.com/sites/tjmccue/2019/03/27/wohlers-report-2019-forecasts-35-6-billion-in-3d-printing-industry-growth-by-2024/} -} - -@article{Ford2014, - title = {Additive {{Manufacturing Technology}} : {{Potential Implications}} for {{U}} . {{S}} . {{Manufacturing}}}, - author = {Ford, Sharon L N}, - year = {2014}, - journal = {Journal of International Commerce and Economics (USA)}, - number = {September}, - pages = {1--35}, - file = {/Users/fabio/Zotero/storage/I5FH9KFV/Additive Manufacturing Technology Potential Implications for U . S . Manufacturing.pdf} -} - -@article{Ford2016, - title = {Additive Manufacturing and Sustainability: An Exploratory Study of the Advantages and Challenges}, - author = {Ford, Simon and Despeisse, M{\'e}lanie}, - year = {2016}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {137}, - pages = {1573--1587}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2016.04.150}, - abstract = {The emergence of advanced manufacturing technologies, coupled with consumer demands for more customised products and services, are causing shifts in the scale and distribution of manufacturing. In this paper, consideration is given to the role of one such advanced manufacturing process technology: additive manufacturing. The consequences of adopting this novel production technology on industrial sustainability are not well understood and this exploratory study draws on publically available data to provide insights into the impacts of additive manufacturing on sustainability. Benefits are found to exist across the product and material life cycles through product and process redesign, improvements to material input processing, make-to-order component and product manufacturing, and closing the loop. As an immature technology, there are substantial challenges to these benefits being realised at each stage of the life cycle. This paper summarises these advantages and challenges, and discusses the implications of additive manufacturing on sustainability in terms of the sources of innovation, business models, and the configuration of value chains.}, - isbn = {0256-9574}, - pmid = {18350221}, - keywords = {3D printing,Additive manufacturing,Industrial sustainability,Product life cycle,Resource efficiency,Value chain reconfiguration}, - file = {/Users/fabio/Zotero/storage/AUHMRHS2/Additive manufacturing and sustainability- an exploratory study of the advantages and challenges.pdf} -} - -@article{Ford2019, - title = {Designing Consumer Electronic Products for the Circular Economy Using Recycled {{Acrylonitrile Butadiene Styrene}} ({{ABS}}): {{A}} Case Study}, - author = {Ford, P. and Fisher, Jill}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117490}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.321}, - urldate = {2020-03-22}, - abstract = {This study considers the feasibility of using 100\% recycled Acrylonitrile Butadiene Styrene (rABS) in the caseworks of small consumer electronic products as a step towards more circular design and manufacturing. A Digitally Enhanced Cordless Telephone (DECT) handset was chosen as a representative example of such a product. Materials testing on the rABS demonstrated that 100\% recycled ABS has similar properties to virgin ABS and can be substituted for virgin ABS as long as the product design allows for the slightly stiffer nature of the rABS and addresses issues of surface finish and ability to colour. By clearly understanding these issues at the outset of the design process, and by adapting the designs appropriately at the outset, it was possible to produce an rABS handset which was as robust and as cosmetically acceptable as one made of virgin ABS. This suggests that the recycled material could be used widely in this type of product and also at reduced cost to using virgin ABS. Furthermore, an abridged Life Cycle Analysis of the existing handset suggested that other issues associated with the environmental impact of the product could be relatively easily addressed at the design stage by considering energy use and end of life issues.}, - keywords = {Circular economy,Design for environment,Electronic product,End of life,Life-cycle assessment,Recycled ABS} -} - -@article{fordDesigningConsumerElectronic2019, - title = {Designing Consumer Electronic Products for the Circular Economy Using Recycled {{Acrylonitrile Butadiene Styrene}} ({{ABS}}): {{A}} Case Study}, - shorttitle = {Designing Consumer Electronic Products for the Circular Economy Using Recycled {{Acrylonitrile Butadiene Styrene}} ({{ABS}})}, - author = {Ford, Peter and Fisher, Jill}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117490}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2019.06.321}, - urldate = {2023-08-31}, - abstract = {This study considers the feasibility of using 100\% recycled Acrylonitrile Butadiene Styrene (rABS) in the caseworks of small consumer electronic products as a step towards more circular design and manufacturing. A Digitally Enhanced Cordless Telephone (DECT) handset was chosen as a representative example of such a product. Materials testing on the rABS demonstrated that 100\% recycled ABS has similar properties to virgin ABS and can be substituted for virgin ABS as long as the product design allows for the slightly stiffer nature of the rABS and addresses issues of surface finish and ability to colour. By clearly understanding these issues at the outset of the design process, and by adapting the designs appropriately at the outset, it was possible to produce an rABS handset which was as robust and as cosmetically acceptable as one made of virgin ABS. This suggests that the recycled material could be used widely in this type of product and also at reduced cost to using virgin ABS. Furthermore, an abridged Life Cycle Analysis of the existing handset suggested that other issues associated with the environmental impact of the product could be relatively easily addressed at the design stage by considering energy use and end of life issues.}, - keywords = {Circular economy,Design for environment,Electronic product,End of life,Life-cycle assessment,Recycled ABS}, - file = {/Users/fabio/Zotero/storage/CT83HE24/Ford_Fisher_2019_Designing consumer electronic products for the circular economy using recycled.pdf;/Users/fabio/Zotero/storage/E7TNTXKT/S095965261932298X.html} -} - -@article{fordWhatYouMean2021, - title = {What Do You Mean by Values? {{Integration}} of Social with Biophysical Knowledge in the Development of a Landscape Decision Support System}, - author = {Ford, Rebecca M and Rawluk, Andrea and Williams, Kathryn J H}, - year = {2021}, - journal = {Environmental Science and Policy}, - volume = {124}, - pages = {1462--9011}, - doi = {10.1016/j.envsci.2021.08.011}, - urldate = {2021-09-15}, - file = {/Users/fabio/Zotero/storage/IHU9PDRR/full-text.pdf} -} - -@article{forgetNouveauxTerritoiresEnergetiques2021, - title = {{De nouveaux territoires \'energ\'etiques dans les Andes et Alpes. Sur les sentiers des transitions}}, - author = {Forget, Marie and Bos, Vincent and Carrizo, Silvina Cecila}, - year = {2021}, - journal = {Espaces et soci\'et\'es}, - volume = {182}, - number = {1}, - pages = {15--32}, - publisher = {{\'Er\`es}}, - address = {{Toulouse}}, - issn = {0014-0481}, - doi = {10.3917/esp.182.0015}, - urldate = {2023-02-15}, - abstract = {Ce num\'ero \'etudie les effets spatiaux de la transition \'energ\'etique. Avec le d\'eveloppement des \'energies renouvelables, la production d'\'energie sort progressivement de ses grands lieux de production pour venir s'implanter dans des territoires jusque-l\`a peu concern\'es. L'objectif de ce dossier est de nourrir les d\'ebats sur les effets de cette d\'ecentralisation sur les territoires en Europe et dans le monde, ainsi que sur la mani\`ere dont les acteurs s'en saisissent et la mettent en \oe uvre \`a leur \'echelle. Il s'int\'eresse en particulier aux cons\'equences de l'\'evolution des formes d'organisation d'un syst\`eme de production \'energ\'etique de plus en plus localis\'e, ainsi qu'aux bouleversements des pratiques et configurations d'acteurs li\'es \`a cette d\'ecentralisation.}, - langid = {french}, - keywords = {Alpes fran\c{c}aises,Andes,\'energies renouvelables,lithium,transition \'energ\'etique}, - file = {/Users/fabio/Documents/8-Enseñanza/Eduter/figures/Capture d’écran 2023-02-15 à 21.38.41.png;/Users/fabio/Zotero/storage/AQ8E223N/Forget et al. - 2021 - De nouveaux territoires énergétiques dans les Ande.pdf;/Users/fabio/Zotero/storage/X5PN6VZ3/revue-espaces-et-societes-2021-1-page-15.html} -} - -@misc{FormulatingConvincingRationale, - title = {Formulating a Convincing Rationale for a Research Study}, - issn = {1752-1882}, - urldate = {2023-01-08}, - howpublished = {https://www.tandfonline.com/doi/epdf/10.1080/17521882.2011.648335?needAccess=true\&role=button}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/KVQ9UTZU/17521882.2011.html} -} - -@book{Forrester1961, - title = {Industrial Dynamics}, - author = {Forrester, {\relax Jay}.}, - year = {1961}, - publisher = {{MIT press}}, - address = {{CAMBRIDGE., MASSACHUSETTS}} -} - -@article{fortnamPolycentricityPracticeMarine2022, - title = {Polycentricity in Practice: {{Marine}} Governance Transitions in {{Southeast Asia}}}, - shorttitle = {Polycentricity in Practice}, - author = {Fortnam, M. and Evans, L. and Amira Mas Ayu, A. M. and Bastian, L. and Chaigneau, T. and Creencia, L. and Goh, H. C. and Gonzales, B. and Madarcos, K. and Maharja, C. and Mohd Iqbal, M. and Ngoc Le, T. and Praptiwi, R. A. and Sugardjito, J. and Van Nguyen, Q. and Wan Nur Syazana, W. M. A.}, - year = {2022}, - month = nov, - journal = {Environmental Science \& Policy}, - volume = {137}, - pages = {87--98}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.08.010}, - urldate = {2022-09-18}, - abstract = {Environmental governance systems are expanding in size and complexity as they become more integrated and ecosystem-based. In doing so, governance transitions often involve more actors and knowingly or unknowingly alter the autonomy of actors to make decisions, and thereby the ability of the governance system to self-organise. In other words, these governance systems are becoming increasingly polycentric, moving towards an institutional structure that is reported to confer a number of benefits to social-ecological systems. This article adds to a growing body of evidence on polycentric environmental governance in practice. It adds nuance to the normative and apolitical portrayals of governance transitions in general, and transitions towards more polycentric forms of governance in particular. We analyse the relations amongst actors and historical development of four large-scale marine governance systems in Southeast Asia to understand how context, particularly power, shapes the emergence and evolution of polycentric marine governance in practice. Our data indicate that transitions towards increased polycentricity do increase diversity and autonomy of decision-making centres, which can enable more innovation or flexibility to respond to changing circumstances. However, these innovations do not always underpin sustainability and equity. Coordination mechanisms are critical for channelling the power dynamics that emerge among diverse actors towards sustainability. Yet, in these emergent, ad hoc polycentric governance arrangements such mechanisms remained nascent, ineffective, or inactive. The transaction costs involved in co-ordinating a semi-autonomous polycentric system are seemingly difficult to overcome in low- to middle-income contexts and need investment in resources and accountability mechanisms.}, - langid = {english}, - keywords = {Environmental governance,Polycentric governance,Power,Southeast Asia}, - file = {/Users/fabio/Zotero/storage/MCWHWKYR/Fortnam et al_2022_Polycentricity in practice.pdf;/Users/fabio/Zotero/storage/Z56ABE4I/S1462901122002507.html} -} - -@article{Foteinis2020, - title = {How Small Daily Choices Play a Huge Role in Climate Change: {{The}} Disposable Paper Cup Environmental Bane}, - author = {Foteinis, Spyros}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {255}, - pages = {120294}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120294} -} - -@book{Fowlkes1996, - title = {Engineering {{Methods}} for {{Robust Product Design}}: {{Using Taguchi Methods}} in {{Technology}} and {{Product Development}}}, - author = {Fowlkes, William Y. and Creveling, Clyde M.}, - year = {1995}, - publisher = {{Addison Wesley Longman, Inc.}}, - address = {{Reading, MA}}, - urldate = {2014-03-05}, - isbn = {0-201-63367-1} -} - -@article{Fox2013, - title = {Paradigm Shift: Do-it-yourself ({{DIY}}) Invention and Production of Physical Goods for Use or Sale}, - author = {Fox, Stephen}, - year = {2013}, - month = feb, - journal = {Journal of Manufacturing Technology Management}, - volume = {24}, - number = {2}, - pages = {218--234}, - issn = {1741-038X}, - doi = {10.1108/17410381311292313}, - arxiv = {http://dx.doi.org/10.1108/BIJ-10-2012-0068}, - isbn = {0320130029}, - pmid = {42012058}, - file = {/Users/fabio/Zotero/storage/IL65K8YW/Paradigm shift- do-it-yourself (DIY) invention and production of physical goods for useor sale.pdf} -} - -@article{Fox2014, - title = {Third {{Wave Do-It-Yourself}} ({{DIY}}): {{Potential}} for Prosumption, Innovation, and Entrepreneurship by Local Populations in Regions without Industrial Manufacturing Infrastructure}, - author = {Fox, Stephen}, - year = {2014}, - journal = {Technology in Society}, - volume = {39}, - pages = {18--30}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2014.07.001}, - abstract = {There is a new Do-It-Yourself (DIY) paradigm that involves ordinary people inventing, designing, making, and/or selling physical goods ranging from jewellery to off-road vehicles. Via websites, this DIY involves combining the read-write functionality of Web 2.0 with computer-aided (CAD) design and additive manufacturing. In addition, the new DIY is carried out at workshops where people use handheld tools together with CAD and manufacturing machines. There have been two earlier waves of DIY: subsistence DIY (First Wave) and industrial DIY (Second Wave). It has been claimed that the new, Third Wave, DIY paradigm is revolutionary for prosumption, for innovation, and for entrepreneurship. Furthermore, it has been claimed that Third Wave DIY could be carried out by anybody at any location. However, much Third Wave DIY involves participants who are literate in a "lingua franca", and have computer skills. Furthermore, Third Wave DIY is often reliant on infrastructure used in industrialized manufacturing. Findings are reported from a study investigating the potential for Third Wave DIY to better enable prosumption, innovation, and entrepreneurship - particularly by local populations that lack functional literacy in any "lingua franca", computer skills, and access to industrial manufacturing infrastructure. Study findings suggest that while Third Wave DIY is revolutionary, its expansion may never be fully viable without subsidy of innovation activities. However, in many parts of the world, prosumption of basic goods may be more important initially than innovation of new sophisticated goods. This can be enabled by combining Third Wave DIY technologies with mobile production facilities. \textcopyright{} 2014 Elsevier Ltd.}, - isbn = {0160-791X}, - keywords = {Do-It-Yourself (DIY),Entrepreneurship,Innovation,Mobile production,Prosumption}, - file = {/Users/fabio/Zotero/storage/77ASNVE9/Third Wave Do-It-Yourself (DIY)- Potential for prosumption, innovation, and entrepreneurship by local populations in regions without industrial manufacturing infrastructure.PDF} -} - -@article{Fox2018, - title = {Addressing the Influence of Groupthink during Ideation Concerned with New Applications of Technology in Society}, - author = {Fox, Stephen}, - year = {2018}, - month = dec, - journal = {Technology in Society}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2018.12.009} -} - -@article{foxRedditNovelData2021, - title = {Reddit: {{A}} Novel Data Source for Cultural Ecosystem Service Studies}, - author = {Fox, Nathan and Graham, Laura J. and Eigenbrod, Felix and Bullock, James M. and Parks, Katherine E.}, - year = {2021}, - month = aug, - journal = {Ecosystem Services}, - volume = {50}, - pages = {101331}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101331}, - urldate = {2021-07-05} -} - -@article{foxTechnologyPhilosophiesPolitics2023, - title = {Technology Philosophies, Politics and Policies in Society: {{Technology}} in {{Society Briefing}}}, - shorttitle = {Technology Philosophies, Politics and Policies in Society}, - author = {Fox, Stephen and {Griffy-Brown}, Charla}, - year = {2023}, - month = may, - journal = {Technology in Society}, - volume = {73}, - pages = {102259}, - issn = {0160-791X}, - doi = {10.1016/j.techsoc.2023.102259}, - urldate = {2023-05-11}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/K3NP6LTY/Fox y Griffy-Brown - 2023 - Technology philosophies, politics and policies in .pdf;/Users/fabio/Zotero/storage/7QX3AAPE/S0160791X23000647.html} -} - -@article{Fraccascia2021, - title = {Ecosystem Indicators for Measuring Industrial Symbiosis}, - author = {Fraccascia, Luca and Giannoccaro, Ilaria and Albino, Vito}, - year = {2021}, - month = may, - journal = {Ecological Economics}, - volume = {183}, - pages = {106944}, - publisher = {{Elsevier B.V.}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.106944}, - urldate = {2021-06-12}, - abstract = {Industrial symbiosis (IS) is a collaborative approach among firms involving physical exchanges of materials, energy, and wastes, which creates economic advantages for firms and environmental benefits for the society. In this paper, we adopt an ecosystem approach to conceptualize the network of firms involved in IS relationships (ISN), in terms of organisms (firms), functions (waste exchange), and services (environmental benefits), and provide new insight on how to assess and compute IS performance indicators. In particular, we designed five classes of indicators aimed at assessing 1) the impact of services provided by ISNs on the environment, 2) the performance of the ISN services, 3) how the single functions contribute to ISN services, 4) the performance of the ISN functions, and 5) how the single firms contribute to ISN functions. A numerical example is also discussed showing how to compute them and the information they provide. The proposed indicators are useful to develop proper strategies to increase the efficiency of the system in exploiting the IS synergies, to improve the symbiotic exchanges carried out in ISNs, and to identify firms contributing most to IS benefits. Hence, they may assist managers of ISNs and policymakers in decision-making aspects, an urgent need of the literature.}, - keywords = {Circular economy,Ecosystem approach,Industrial symbiosis networks,Input\textendash output,Performance indicators}, - file = {/Users/fabio/Zotero/storage/CGWHQR25/full-text.pdf} -} - -@article{fraislDemonstratingPotentialPicture2022, - title = {Demonstrating the Potential of {{Picture Pile}} as a Citizen Science Tool for {{SDG}} Monitoring}, - author = {Fraisl, D. and See, L. and Sturn, T. and MacFeely, S. and Bowser, A. and Campbell, J. and Moorthy, I. and Danylo, O. and McCallum, I. and Fritz, S.}, - year = {2022}, - month = feb, - journal = {Environmental Science \& Policy}, - volume = {128}, - pages = {81--93}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.10.034}, - urldate = {2021-11-30} -} - -@article{Franchetti2017, - title = {An Economic Analysis Comparing the Cost Feasibility of Replacing Injection Molding Processes with Emerging Additive Manufacturing Techniques}, - author = {Franchetti, Matthew and Kress, Connor}, - year = {2017}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {88}, - number = {9-12}, - pages = {2573--2579}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-016-8968-7}, - abstract = {Access to this document was granted through an Emerald subscription provided by emerald-srm:549852 [] For Authors If you would like to write for this, or any other Emerald publication, then please use our Emerald for Authors service information about how to choose which publication to write for and submission guidelines are available for all. Please visit www.emeraldinsight.com/authors for more information. About Emerald www.emeraldinsight.com Emerald is a global publisher linking research and practice to the benefit of society. The company manages a portfolio of more than 290 journals and over 2,350 books and book series volumes, as well as providing an extensive range of online products and additional customer resources and services. Abstract Purpose \textendash{} The purpose of this paper is to identify and develop a hierarchical model for the barriers affecting the growth of mobile commerce (M-commerce). Based on the model developed, the authors' objective is to identify those variables that are of strategic nature and are the root cause of the issue. Design/methodology/approach \textendash{} Variables considered as barriers are identified, and utilizing the interpretive structural model approach, a relationship model is developed. Further, the impact matrix cross-reference multiplication applied to a classification approach is used to analyze the effect and dependence among these factors. Findings \textendash{} The research in the area of M-commerce in the Arab world and related to the strategic aspect is limited in the extant literature. The present study tries to fill this gap by investigating the variables that inhibit the growth of M-commerce in Qatar. The research shows that there exists a group of barriers having a high driving power and low dependence requiring maximum attention and of strategic importance, while another group consists of those variables that have high dependence and are the resultant actions. Practical implications \textendash{} There is a growing concern that although the numbers of mobile subscribers are increasing at a very fast pace in Qatar, actual M-commerce activities in the country remain low. The findings of this study can be used to understand the differences between the independent and dependent variables and their mutual relationships. The study would also help the policy makers to develop suitable strategies to facilitate growth of M-commerce in the country. Originality/value \textendash{} This research was the first attempt to investigate the relationships among the variables inhibiting the growth of M-commerce in a fast-growing economy in a Gulf Cooperation Council (GCC) region. Given that there is limited research on M-commerce in the GCC context, the study can be viewed as an investigation that provides a good understanding of the variables and their interrelationships affecting M-commerce proliferation.}, - keywords = {3D printing,Additive manufacturing,Cost analysis,Injection molding}, - file = {/Users/fabio/Zotero/storage/SWWZPYU2/An economic analysis comparing the cost feasibility of replacing injection molding processes with emerging additive manufacturing techni.pdf} -} - -@article{Franco2019, - title = {A System Dynamics Approach to Product Design and Business Model Strategies for the Circular Economy}, - author = {Franco, Maria A.}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {241}, - pages = {118327}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118327} -} - -@article{francoCircularEconomyMicro2017, - title = {Circular Economy at the Micro Level: {{A}} Dynamic View of Incumbents' Struggles and Challenges in the Textile Industry}, - author = {Franco, Maria A.}, - year = {2017}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {168}, - pages = {833--845}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.09.056}, - urldate = {2022-03-13}, - abstract = {The Circular Economy (CE) has received considerable attention as an approach that promises to reconcile ecological systems and economic growth. In spite of its increased popularity, little is known about the implementation struggles of incumbent firms across industrial sectors. Furthermore, although the notion of circular production systems is at the intersection of different research areas such as sustainable product design, sustainable supply chains, and reverse logistics, knowledge on how these concepts combine to ease or impede firms' transition towards circularity is scarce. To shed light on these gaps, I used multiple case studies from Cradle to Cradle certified companies in the textile industry in Europe. By employing qualitative research, I identified a set of factors along the textile value chain, from product design to take-back and reprocessing, that are crucial in expediting or delaying a firm's aspirations to develop a circular product. The main contribution of this paper is the dynamic understanding of how certain collaborative supplier-buyer innovation factors (i.e., supply chain position, power balance, and a shared vision) coupled with complex aspects in product design, namely in basic materials, architecture, and functionality, combine to determine the output speed and quantity of circular products to be sold, taken back, and ultimately regenerated.}, - keywords = {Circular economy,Implementation,Supply chain collaboration,Sustainable production,Systemic change} -} - -@article{Franz2002, - title = {Programme on the Recyclability of Food-Packaging Materials with Respect to Food Safety Considerations: {{Polyethylene}} Terephthalate ({{PET}}), Paper and Board, and Plastics Covered by Functional Barriers}, - author = {Franz, R.}, - year = {2002}, - journal = {Food Additives and Contaminants}, - volume = {19}, - number = {February}, - pages = {93--110}, - issn = {14645122}, - doi = {10.1080/02652030110085395a}, - abstract = {Stimulated by new ecology-driven European and national regulations, new routes of recycling waste appear on the market. Since food packages represent a large percentage of the plastics consumption and since they have a short lifetime, an important approach consists in making new packages from post-consumer used packages. On the other hand, food-packaging regulations in Europe require that packaging materials must be safe. Therefore, potential mass transfer (migration) of harmful recycling-related substances to the food must be excluded and test methods to ensure the safety-in-use of recycled materials for food packaging are needed. As a consequence of this situation, a European research project FAIR-CT98-4318, with the acronym 'Recyclability', was initiated. The project consists of three sections each focusing on a different class of recycled materials : polyethylene terephthalate (PET), paper and board, and plastics covered by functional barriers. The project consortium consists of 28 project members from 11 EU countries. In addition, the project is during its lifetime in discussion with the US Food and Drug Administrations (FDA) to consider also US FDA regulatory viewpoints and to aim, as a consequence, to harmonizable conclusions and recommendations. The paper introduces the project and presents an overview of the project work progress. \textcopyright{} 2002 Taylor \& Francis Group, LLC.}, - keywords = {Board,Diffusion,Food packaging,Food safety,Functional barrier,Migration,Paper,Partition coefficients,Plastics,Polyethylene terephthalate,Recycling}, - file = {/Users/fabio/Zotero/storage/MZ587379/CORDIS_publication_200214750_es.pdf} -} - -@article{franzRecyclingPostConsumerPackaging2022, - title = {Recycling of {{Post-Consumer Packaging Materials}} into {{New Food Packaging Applications}}\textemdash{{Critical Review}} of the {{European Approach}} and {{Future Perspectives}}}, - author = {Franz, Roland and Welle, Frank}, - year = {2022}, - month = jan, - journal = {Sustainability}, - volume = {14}, - number = {2}, - pages = {824}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2071-1050}, - doi = {10.3390/su14020824}, - urldate = {2023-09-05}, - abstract = {The European strategy for plastics, as part of the EU's circular economy action plan, should support the reduction in plastic waste. One key element in this action plan is the improvement of the economics and quality of recycled plastics. In addition, an important goal is that by 2030, all plastics packaging placed on the EU market must either be reusable or can be recycled in a cost-effective manner. This means that, at the end, a closed-loop recycling of food packaging materials should be established. However, the use of recyclates must not result in less severe preventive consumer protection of food packaging materials. This may lead to a conservative evaluation of authorities on post-consumer recyclates in food packaging applications. On the other hand, over-conservatism might over-protect the consumer and generate insurmountable barriers to the application of post-consumer recyclates for food packaging and, hence, counteract the targets of circular economy. The objective of this review is to provide an insight into the evaluation of post-consumer recyclates applied in direct contact to food. Safety assessment criteria as developed by the European Food Safety Authority EFSA will be presented, explained, and critically discussed.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {circular economy,diffusion modelling,food safety evaluation,legal compliance,migration,packaging,recycling}, - file = {/Users/fabio/Zotero/storage/WEK4T6M7/Franz_Welle_2022_Recycling of Post-Consumer Packaging Materials into New Food Packaging.pdf} -} - -@article{Fratini2019, - title = {Exploring Circular Economy Imaginaries in {{European}} Cities: {{A}} Research Agenda for the Governance of Urban Sustainability Transitions}, - author = {Fratini, Chiara Farn{\'e} and Georg, Susse and J{\o}rgensen, Michael S{\o}gaard}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {228}, - pages = {974--989}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.193}, - urldate = {2020-03-22}, - abstract = {This paper builds on the following research questions: 1)How is circular economy imagined in the academic literature in support of sustainability transitions in European cities? 2)How do European cities imagine circular economy as a knowable object of governance? 3)How can the circular economy imaginary be an opportunity for socially inclusive and environmentally desirable urban transitions? We engaged in a three-fold research endeavour to address these questions. Firstly, we conducted an in-depth literature review, mapping the emergence and developments of the circular economy concept in time and space with a specific focus on urban studies. Secondly, we analysed documented translations of the circular economy imaginary in three European metropolitan cities (Amsterdam, Paris and London)to explore the discourses, institutions, representations and social identities underpinning their respective translations, and reflect on how they diverge from each other and how they have the potential to deliver sustainable outcomes. Thirdly, these results were used to outline a research agenda that explores the relationship between the political and the epistemic domain of existing urban translations of circular economy across scales and places, to support future empirical investigations of whether and how circular economy imaginaries can support transformative pathways for socially inclusive and environmentally desirable value creation in cities. In so doing, this paper fosters reflexivity for both theory and practice in order to better understand how theorisations and the application of circular economy could be advanced in support of urban sustainability transitions.}, - keywords = {Circular economy,Co-production,Europe,Geographies of transition,Governance,Socio-technical imaginaries,Urban sustainability transitions} -} - -@article{frauenbergerScaleDialecticsAffect2018, - title = {On Scale, Dialectics, and Affect}, - author = {Frauenberger, Christopher and Foth, Marcus and Fitzpatrick, Geraldine}, - year = {2018}, - month = aug, - pages = {1--13}, - publisher = {{Association for Computing Machinery (ACM)}}, - doi = {10.1145/3210586.3210591}, - urldate = {2022-03-13}, - abstract = {The Participatory Design (PD) community is committed to continuously refine its technological, social, political, and scientific agenda, and as a result, PD has become more widely adopted, robust , and sophisticated. Yet, PD's advancement cannot end here. The gap between those who can contribute to the shaping of future technologies and those who are reduced to consumers, has-if anything-widened on a grand scale. In response, we argue through three lenses: scale, dialectics, and affect in PD, and suggest some pathways to build bridges, foster alliances, and evolve PD practice to proliferate the democratisation in technology design that has been a strong value driving PD. Scale asks about ways for PD to extend its reach without giving up on its core qualities. Dialectics is about creating and maintaining the spaces and fora for constructive conflict by networking and linking with other stake-holders, organisations, and domains. Finally, affect discusses how PD can put forward democratic visions of technological futures that connect to people's hearts, acknowledging that decisions are often made irrationally and unconsciously. Our review draws attention to opportunities for PD to travel between different contexts and proliferate through interconnected and intermediary knowledge and an embodied literacy that enables PD to reach further into industry, government, and community.} -} - -@article{Freeman2018, - title = {A Theory on the Future of the Rebound Effect in a Resource-Constrained World}, - author = {Freeman, Rachel}, - year = {2018}, - month = aug, - journal = {Frontiers in Energy Research}, - volume = {6}, - number = {AUG}, - pages = {81}, - publisher = {{Frontiers}}, - issn = {2296598X}, - doi = {10.3389/fenrg.2018.00081}, - urldate = {2021-08-02}, - abstract = {The paradox underlying the rebound effect is that, due to secondary effects, improvements in resource efficiency provide smaller reductions in the consumption of energy and/or material resources than are expected-or even an overall net increase in resource use. The rebound effect has played a role in economic growth and industrialization, yet it remains a problem for the task of reducing negative environmental impacts. This paper proposes that the size of the rebound effect, and the type of impacts it causes, may be affected by future changes in the system within which it arises. Four types of rebound effect are considered: economy-wide effects, transformational effects, frontier effects, and international rebound effects. A conceptual model of the historical role of the rebound effect in socio-technical systems, and the relationship of socio-technical systems with natural capital and human-created capital, provides a "sandbox" for testing ideas about the future. The model theory draws upon the concepts of natural capital, the Global Ecological Footprint, and the Great Acceleration. How the size of four types of the rebound effect might change in future, as supplies of resources from natural capital become more constrained, is discussed within three storylines. In the first storyline, natural capital declines but remains fairly stable; rebound is much decreased as resources are less available and efficiency is used up more in stabilizing supplies of goods and services. In the second storyline, growth continues without constraint amid regional rivalry; eventually there is a strong downturn in availability of resources and negative impacts on both society and natural capital. In the third storyline, impact caps are implemented for different types of resources; for some time, industry and society adapt by investing in low resource-use innovation and global cooperation on management of natural capital; once natural capital recovers and stabilizes, growth and consumption may increase along with the rebound effect, but staying within a Global Ecological Footprint of 1 Earth. The theory and model in this paper are intended to contribute to new thinking on the subject of the rebound effect.}, - keywords = {Global Ecological Footprint,Natural capital,Socio-technical systems,System dynamics,The rebound effect}, - file = {/Users/fabio/Zotero/storage/LABG9786/full-text.pdf} -} - -@article{freire-gonzalez2022, - ids = {freire-gonzalez2022a}, - title = {Policy Strategies to Tackle Rebound Effects: {{A}} Comparative Analysis}, - shorttitle = {Policy Strategies to Tackle Rebound Effects}, - author = {{Freire-Gonz{\'a}lez}, Jaume and Ho, Mun S.}, - year = {2022}, - month = mar, - journal = {Ecological Economics}, - volume = {193}, - pages = {107332}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2021.107332}, - urldate = {2022-08-11}, - abstract = {Promoting energy efficiency is generally assumed to be an effective strategy to reduce energy use and tackle climate change. However, an extensive literature has shown that rebound effects reduce its effectiveness and can even be counterproductive. We show how a more complex policy strategy, with coordinated measures, could provide the desired results by offsetting energy and carbon rebound effects. Along with the energy-efficiency improvement, we separately implement five different policies: carbon taxes, energy production taxes, an emissions trading system, and changes in consumption patterns (away from energy and toward services consumption). These policies are assessed using an economy\textendash energy\textendash environment dynamic Computable General Equilibrium (CGE) model developed for Catalonia, and compared in economic, energy, and environmental terms. The simulations show that all the strategies tested are able to offset rebounds at a low cost, with a proper design. All of them improve GDP in relation to the no-efficiency improvement base case. If tax revenues from the parallel policies are used to encourage investment, the long-term effect on GDP may even be positive.}, - langid = {english}, - keywords = {Cap-and-trade,Carbon tax,Computable general equilibrium,Energy policy,Rebound effect}, - file = {/Users/fabio/Zotero/storage/6FVIJC4C/Freire-González_Ho_2022_Policy strategies to tackle rebound effects.pdf;/Users/fabio/Zotero/storage/MNQJSCZQ/S0921800921003918.html} -} - -@article{freire-gonzalezToolsCircularEconomy2022, - title = {Tools for a Circular Economy: {{Assessing}} Waste Taxation in a {{CGE}} Multi-Pollutant Framework}, - author = {{Freire-Gonz{\'a}lez}, Jaume and {Martinez-Sanchez}, Veronica and {Puig-Ventosa}, Ignasi}, - year = {2022}, - month = feb, - journal = {Waste Management}, - volume = {139}, - pages = {50--59}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.12.016}, - urldate = {2022-01-17} -} - -@article{Freitas2016, - title = {Sustainability in Extrusion-Based Additive Manufacturing Technologies}, - author = {Freitas, Dino and Almeida, Henrique A. and B{\'a}rtolo, Helena and B{\'a}rtolo, Paulo J.}, - year = {2016}, - month = jun, - journal = {Progress in Additive Manufacturing}, - volume = {1}, - number = {1-2}, - pages = {65--78}, - issn = {2363-9512}, - doi = {10.1007/s40964-016-0007-6}, - keywords = {environmental impact \'a eco-design,manufacturing \'a fused deposition,modelling \'a,sustainable manufacturing \'a additive}, - file = {/Users/fabio/Zotero/storage/DPS735LM/Freitas et al. - 2016 - Sustainability in extrusion-based additive manufacturing technologies.pdf} -} - -@article{Frempong2013, - title = {Municipal Solid Waste Management in Tarkwa Area Council ({{TAC}}), Ghana}, - author = {Frempong, Victoria Elorm}, - year = {2013}, - month = dec, - journal = {International Journal of Sustainable Development and Planning}, - volume = {8}, - number = {4}, - pages = {563--575}, - issn = {1743-7601}, - doi = {10.2495/SDP-V8-N4-563-575} -} - -@techreport{Friedrich2013a, - title = {Boundary Conditions for Successful {{Urban Living Labs}}}, - author = {Friedrich, Pirjo and Karlsson, Anja and Federley, Maija}, - year = {2013}, - institution = {{SubUrbanLab}}, - abstract = {Urban Living Labs are development environments that integrate residents and other stakeholders to develop and test new solutions in their daily life. The users of the new services or solutions are active partners in the whole development process, which happens in the real urban context. Urban Living Labs utilize various co-design methods for understanding the needs, generating solution ideas, presenting ideas and evaluating the solutions in practice. In addition, citizen participation methods are used for participation in decision making and taking action. This document presents the boundary conditions for successful Urban Living Lab implementation as well as methods that can be used in different stages of the development process. The report is targeted for municipalities, housing companies and researchers that aim at involving different stakeholders in different kinds of development projects in the urban context. Before starting Urban Living Lab activities, several things have to be checked and planned. First of all, understanding the context is important. This understanding can be obtained by interviewing people from different backgrounds, observing the environment and familiarising oneself with earlier reports written about the area and its challenges. The next tasks is to define the goals for the development project based on the needs of different target groups, identify the residents and other stakeholders who should participate in the project and involve them in defining the aims, clarify the roles in the Urban Living Lab and define a transparent decision making process. Finally, the methods for the specific actions and the communication process should be planned. Key success factors for Urban Living Labs are the early and continuous involvement of the affected people, clear goals and expectations, and acting instead of discussing. The methods must be adapted to the goals and participants. At its best, people can participate in the Urban Living Lab activities as a part of their other activities and see the effects of their participation shortly afterwards.} -} - -@article{Friedrich2020, - title = {How Regulatory Measures towards Biobased Packaging Influence the Strategic Behaviour of the Retail Industry: {{A}} Microempirical Study}, - author = {Friedrich, Daniel}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {260}, - pages = {121128}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121128}, - urldate = {2022-01-04}, - abstract = {Germany set a new record in waste production in 2017 and thus occupies one of the top ranks in the EU in terms of garbage creation. However, whether and how much of the waste can be recycled at all depends strongly on the material and its properties, whereby the recycling rate for plastics is still moderate. Environmental damage from plastic packaging can be avoided by using biobased substitute materials. To achieve this, the costs for plastic must first be increased in order to make these alternatives attractive in terms of price. This paper reports on a study dealing with regulatory measures to mitigate the waste problem from an economic point of view. It discusses the results of a choice-based experiment with 253 industrial decision-makers from the German Food and Technics retail segment. Regulatory scenarios, such as Pigou tax on plastic packaging or product labelling about environmental impact, were specified as a means to avoid market failure, and the attitude of the respondents were measured. The data analysis showed that the additional costs of switching to biomaterials are more likely to be passed on to the market by SMEs (100\%) in the form of price increases (p = .01; phi = .28) and that quality reductions tend to be considered by the food industry (p {$<$} .05; phi = .39). Hence, large companies (65.2\%) and the Technical goods traders (35.7\%) showed a tendency to be prepared to bear part of the change costs. The packaging weight was favoured by the majority as the basis for taxation ({$>$}48\%), and it was proposed to indicate the packing's CO2-emissions using a traffic light scheme ({$>$}47\%). Finally, it was found that trading companies in general had only a small influence on the packaging properties of their suppliers' products ({$<$}32\%). From this it can be concluded that impulses for plastic avoidance should rather be set by government regulatory instruments than by self-regulation on the part of the retail industry, which, however, with an average of 30\% plastic recycling in packaging, is already making a significant contribution to avoidance. Finally, it is recommended that economic explanatory models should integrate the variables Company Size and Product Category for reliable economic predictions.}, - keywords = {Biobased plastics composites,Cross-sectional study,Market regulation,Pigou tax,Retail industry} -} - -@article{Friege2017, - title = {Sustainable {{Chemistry}} \textendash{} {{A}} Concept with Important Links to Waste Management}, - author = {Friege, Henning}, - year = {2017}, - month = dec, - journal = {Sustainable Chemistry and Pharmacy}, - volume = {6}, - pages = {57--60}, - issn = {23525541}, - doi = {10.1016/j.scp.2017.08.001} -} - -@article{Friel2013, - title = {Ultrasonic Additive Manufacturing {{A}} Hybrid Production Process for Novel Functional Products}, - author = {Friel, R. J. and Harris, R. A.}, - year = {2013}, - journal = {Procedia CIRP}, - volume = {6}, - number = {1}, - pages = {35--40}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2013.03.004}, - abstract = {Ultrasonic Additive Manufacturing (UAM), or Ultrasonic Consolidation as it is also referred, is a hybrid form of manufacture, primarily for metal components. The unique nature of the process permits extremely novel functionality to be realised such as multi-material structures with embedded componentry. UAM has been subject to research and investigation at Loughborough University since 2001. This paper introduces UAM then details a number of key findings in a number of areas that have been of particular focus at Loughborough in recent years. These include; the influence of pre-process material texture on interlaminar bonding, secure fibre positioning through laser machined channels, and freeform electrical circuitry integration. \textcopyright{} 2013 The Authors.}, - isbn = {22128271 (ISSN)}, - keywords = {Additive manufacturing,Hybrid,Ultrasonic}, - file = {/Users/fabio/Zotero/storage/ZWLGD7CK/Friel, Harris - 2013 - Ultrasonic additive manufacturing A hybrid production process for novel functional products.pdf} -} - -@article{frischknechtGlobalGuidanceEnvironmental2016, - title = {Global Guidance on Environmental Life Cycle Impact Assessment Indicators: Progress and Case Study}, - author = {Frischknecht, Rolf and Fantke, Peter and Tsch{\"u}mperlin, Laura and Niero, Monia and Ant{\'o}n, Assumpci{\'o} and Bare, Jane and Boulay, Anne-Marie and Cherubini, Francesco and Hauschild, Michael Z. and Henderson, Andrew and Levasseur, Annie and McKone, Thomas E. and Michelsen, Ottar and {i Canals}, Lloren{\c c} Mil{\`a} and Pfister, Stephan and Ridoutt, Brad and Rosenbaum, Ralph K. and Verones, Francesca and Vigon, Bruce and Jolliet, Olivier}, - year = {2016}, - month = jan, - journal = {The International Journal of Life Cycle Assessment 2016 21:3}, - volume = {21}, - number = {3}, - pages = {429--442}, - publisher = {{Springer}}, - issn = {1614-7502}, - doi = {10.1007/S11367-015-1025-1}, - urldate = {2021-10-07}, - abstract = {The life cycle impact assessment (LCIA) guidance flagship project of the United Nations Environment Programme (UNEP)/Society of Environmental Toxicology and Chemistry (SETAC) Life Cycle Initiative aims at providing global guidance and building scientific consensus on environmental LCIA indicators. This paper presents the progress made since 2013, preliminary results obtained for each impact category and the description of a rice life cycle assessment (LCA) case study designed to test and compare LCIA indicators. The effort has been focused in a first stage on impacts of global warming, fine particulate matter emissions, water use and land use, plus cross-cutting issues and LCA-based footprints. The paper reports the process and progress and specific results obtained in the different task forces (TFs). Additionally, a rice LCA case study common to all TF has been developed. Three distinctly different scenarios of producing and cooking rice have been defined and underlined with life cycle inventory data. These LCAs help testing impact category indicators which are being developed and/or selected in the harmonisation process. The rice LCA case study further helps to ensure the practicality of the finally recommended impact category indicators. The global warming TF concludes that analysts should explore the sensitivity of LCA results to metrics other than GWP. The particulate matter TF attained initial guidance of how to include health effects from PM2.5 exposures consistently into LCIA. The biodiversity impacts of land use TF suggests to consider complementary metrics besides species richness for assessing biodiversity loss. The water use TF is evaluating two stress-based metrics, AWaRe and an alternative indicator by a stakeholder consultation. The cross-cutting issues TF agreed upon maintaining disability-adjusted life years (DALY) as endpoint unit for the safeguard subject ``human health''. The footprint TF defined main attributes that should characterise all footprint indicators. ``Rice cultivation'' and ``cooking'' stages of the rice LCA case study contribute most to the environmental impacts assessed. The results of the TF will be documented in white papers and some published in scientific journals. These white papers represent the input for the Pellston workshop\texttrademark, taking place in Valencia, Spain, from 24 to 29 January 2016, where best practice, harmonised LCIA indicators and an update on the general LCIA framework will be discussed and agreed on. With the diversity in results and the multi-tier supply chains, the rice LCA case study is well suited to test candidate recommended indicators and to ensure their applicability in common LCA case studies.}, - keywords = {Environment,Environmental Chemistry,Environmental Economics,Environmental Engineering/Biotechnology,general}, - file = {/Users/fabio/Zotero/storage/WI6Y666N/full-text.pdf} -} - -@article{fritzscheMakingFabricationDoityourself2020, - title = {Making without Fabrication: {{Do-it-yourself}} Activities for {{IT}} Security in an Open Lab}, - author = {Fritzsche, Albrecht}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120163}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120163}, - urldate = {2020-07-14}, - abstract = {Do-it-yourself activities of hackers or makers are accompanied by fundamental claims about the sovereignty of users in their treatment of technology. In Fab Labs and Maker Spaces, such claims are realised by giving users access to hardware for the fabrication and alteration of artefacts. In open laboratories where no such hardware is available, users establish sovereignty in other ways as they step beyond the design and construction of artefacts and get involved in a wider scope of sense-making and agenda-setting behaviours. Using the example of an open lab project on IT security for critical infrastructures, this paper tries to gain a better understanding of these behaviours. Due to the sensitivity of IT security, visitors of the lab are not allowed to get directly involved in the fabrication or alteration of technical architectures, algorithms, etc. Nevertheless, the visitors engage in a variety of other do-it-yourself activities in their approach to the subject matter and the project itself that add new facets to the notion of user sovereignty in hacking and making.}, - keywords = {Critical infrastructures,Do-it-yourself,IT-security,Maker culture,Open laboratories,Souvereignty} -} - -@article{fuClosedloopSupplyChain2021, - title = {Closed-Loop Supply Chain Network with Interaction of Forward and Reverse Logistics}, - author = {Fu, Rong and (Patrick) Qiang, Qiang and Ke, Ke and Huang, Zuqing}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {737--752}, - publisher = {{Elsevier B.V.}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.01.037}, - urldate = {2021-02-14}, - abstract = {Beneficial to the environment but complex in nature, closed-loop supply chain (CLSC) has been understandably a topic of studies for a lot of researchers. However, most of the literature focuses on the homogeneity of CLSC products and on the dyadic structure of the CLSC mostly involving single manufacturers, distributors, or retailers. Very seldom do we find studies conducted in the analysis of the CLSC with network structure, in which multiple agents compete and coordinate. Inspired by some recent business cases, we develop a coupled CLSC network model dealing with heterogeneous products facing different market demands. The end-of-life product from the forward supply chain is collected and recycled so that raw material can be extracted and used as an input for the reverse supply chain which produces another type of product. Moreover, in each supply chain, raw material suppliers, manufactures, and retailers have to compete and coordinate to satisfy the demand while the forward and reverse supply chains have to work together to materialize the supply chain ``loop''. Additionally, a CLSC network equilibrium is defined and studied by using variational inequalities. The properties of the equilibrium solution are also examined. By applying the modified projection method, we analyze a series of numerical examples. Based on the proposed model, the managerial insights are provided to show how the market size of the forward chain, raw material costs in both forward chain and reverse chain impact the demand, equilibrium prices and total profits of the CLSC network. It is also worth noting that the consumers' environmental awareness is critical to make the coupled CLSC networks viable.}, - keywords = {Closed-loop supply chain,Heterogeneous demand,Network equilibrium,Network interaction,Variational inequality} -} - -@article{Fullenwider2019, - title = {Two-Stage Ball Milling of Recycled Machining Chips to Create an Alternative Feedstock Powder for Metal Additive Manufacturing}, - author = {Fullenwider, Blake and Kiani, Parnian and Schoenung, Julie M. and Ma, Kaka}, - year = {2019}, - month = jan, - journal = {Powder Technology}, - volume = {342}, - pages = {562--571}, - issn = {00325910}, - doi = {10.1016/j.powtec.2018.10.023} -} - -@article{fuRealtimeStructuralValidation2023, - title = {Real-Time Structural Validation for Material Extrusion Additive Manufacturing}, - author = {Fu, Yanzhou and Downey, Austin R. J. and Yuan, Lang and Huang, Hung-Tien}, - year = {2023}, - month = mar, - journal = {Additive Manufacturing}, - volume = {65}, - pages = {103409}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2023.103409}, - urldate = {2023-02-12}, - abstract = {Material extrusion additive manufacturing is a technology that produces a part by controlling the melting and extrusion of a thermoplastic filament. A void defect in a specific position can significantly impact the whole product's structural quality and mechanical properties. Different defect detection systems have been built and have achieved good detection accuracy. However, a challenge remains in determining if the structural performance of a part with defects will fail to meet design requirements. This research develops a real-time product structural quality validation system using a multi-dimensional accumulation-threshold-based decision-making approach. The proposed system is validated on a consumer-grade 3D printer with an optical camera. The layer-wise damage information is output from a trained convolutional neural network. The developed structural quality validation system links the obtained defect information with the decision boundary developed by the accumulation-threshold-based decision-making approach to evaluate the effect of the defect. The accumulation-threshold-based decision-making approach is trained on a novel component health index that links the location and size of defects across layers. Experimental results show that the decision boundary obtained from the accumulation-threshold-based decision-making approach performs well on test data with 96\% recall and a 91\% F1-score, which means the decision boundary can provide good overall results while being biased to limit false negative results. The proposed real-time structural quality validation system is validated online for a dog-bone test specimen. Results show that the computational time of the structural quality validation system requires at most 688~ms, while a dog-bone layer takes 75~s to print, thus demonstrating that the proposed system can meet required real-time constraints. The capability to run online enables users to cancel a print mid-process for specimens that will not meet structural loading requirements. The developed system is demonstrated through a video, which is provided in the supplemental materials. The dataset for this work is published as a public repository containing 450 samples with 221 failure classes.}, - langid = {english}, - keywords = {Accumulation-threshold,Cyber-physical system,Decision-making,Defect detection,Material extrusion additive manufacturing,Real-time validation}, - file = {/Users/fabio/Zotero/storage/E6BW29GA/Fu et al_2023_Real-time structural validation for material extrusion additive manufacturing.pdf;/Users/fabio/Zotero/storage/CX76QZZY/S2214860423000222.html} -} - -@article{Furnham2019, - title = {The Change and Stability of {{NEO}} Scores over Six-Years: {{A British}} Study and a Short Review}, - author = {Furnham, Adrian and Cheng, Helen}, - year = {2019}, - month = jul, - journal = {Personality and Individual Differences}, - volume = {144}, - pages = {105--110}, - issn = {01918869}, - doi = {10.1016/j.paid.2019.02.038} -} - -@article{furnhamMythsMisconceptionsPersonality2022, - title = {Myths and Misconceptions about Personality Traits and Tests}, - author = {Furnham, Adrian and Robinson, Charlotte}, - year = {2022}, - month = feb, - journal = {Personality and Individual Differences}, - volume = {186}, - pages = {111381}, - publisher = {{Pergamon}}, - issn = {0191-8869}, - doi = {10.1016/J.PAID.2021.111381}, - urldate = {2021-11-07} -} - -@article{Furr2016a, - title = {Managing {{Multiparty Innovation}}}, - author = {Furr, Nathan and O'Keeffe, Kate and Dyer, Jeffrey H}, - year = {2016}, - journal = {Harward Buisness Review}, - number = {November}, - pages = {76--83} -} - -@article{fursovSocialInnovationIntegrating2022, - title = {Social Innovation: {{Integrating}} Product and User Innovation}, - author = {Fursov, Konstantin and Linton, Jonathan}, - year = {2022}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {174}, - pages = {121224}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121224}, - urldate = {2021-10-28}, - abstract = {The paper introduces a conceptual approach explaining how end users, user communities and /or for-profit firms provide benefits to society through new product or service development. We show that innovation may occur in different economic environments including non-market ones as well as that social innovation will not occur on its own in a purely producer for-profit environment. To explain such cases, we suggest integrating product and user innovation paradigms into the Producer-User Social Innovation (PUSI) Model that demonstrates how infrastructure and enabling technology is provided either by producer or user to introduce new market product or service. To provide face validity and illustrate the versatility of the proposed approach we consider five very different cases. These illustrative examples allowed to provide evidence that user-driven innovation is socially oriented in its nature as it implicitly addresses community or societal needs. In addition to providing insights into the nature of social innovation, the model can be utilized to help understand why social innovation may fail and how to increase the likelihood of success by engaging with appropriate for-profit producers, communities, and users. Implications to policy and practice are provided, including the opportunity for government to encourage social innovation directly and indirectly.} -} - -@article{fuSituMonitoringFused2020, - title = {In Situ Monitoring for Fused Filament Fabrication Process: {{A}} Review}, - author = {Fu, Yanzhou and Downey, Austin and Yuan, Lang and Pratt, Avery and Balogun, Yunusa}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - pages = {101749}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101749}, - urldate = {2020-12-21} -} - -@article{fussRoleSociointegratedRecycling2021, - title = {The Role of a Socio-Integrated Recycling System in Implementing a Circular Economy \textendash{} {{The}} Case of {{Belo Horizonte}}, {{Brazil}}}, - author = {Fuss, Maryegli and Barros, Raphael T.V. and Poganietz, Witold-Roger}, - year = {2021}, - month = feb, - journal = {Waste Management}, - volume = {121}, - pages = {215--225}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.12.006}, - urldate = {2021-01-01} -} - -@article{fuxmanNew3PsSustainability2022, - title = {The New {{3Ps}} of Sustainability Marketing: {{The}} Case of Fashion}, - author = {Fuxman, Leonora and Mohr, Iris and Mahmoud, Ali B. and Grigoriou, Nicholas}, - year = {2022}, - month = may, - journal = {Sustainable Production and Consumption}, - volume = {31}, - pages = {384--396}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.03.004}, - urldate = {2022-03-14} -} - -@inproceedings{Gabriel2018, - title = {Material Value Conservation: {{Development}} of Design Criteria for Rigid Plastic Packaging}, - booktitle = {Materials {{Science Forum}}}, - author = {Gabriel, Djoko Sihono and Habiburrahman, M. and Endthen, Palito J.}, - year = {2018}, - volume = {936 MSF}, - pages = {110--115}, - publisher = {{Trans Tech Publications Ltd}}, - issn = {02555476}, - doi = {10.4028/www.scientific.net/MSF.936.110}, - urldate = {2020-04-08}, - abstract = {Inappropriate plastic packaging design with excessive use of color and printing ink affected to the high cost of sorting, separation and cleaning, and low acceptance level of plastic waste for secondary recycling. This research proposed design for material value conservation which elaborated with a set of design criteria for rigid plastic packaging production as key solution in avoiding value degradation of the plastic waste. The existing design criteria of products have various approach which affected on how to manage abundant plastic waste with no or very low value of materials that has been generated by daily consumption of plastic packaging. Otherwise, the proposed design criteria conserve the material value systematically which make the post use materials of plastic packaging more financially feasible as raw materials in plastic recycling industry. Widespread implementation of the new design criteria in industry will generate broader impact and more benefits in economic, social and environment, especially for countries or regions with high density of people and high consumption rate of conserved products.}, - isbn = {978-3-0357-1378-7}, - keywords = {Benefits in sustainability,Design criteria,Material value conservation,Plastic packaging,Secondary recycling}, - file = {/Users/fabio/Zotero/storage/C47K668A/Material value conservation- Development of design criteria for rigid plastic packaging.pdf} -} - -@article{gabrielCreativitySupportSystems2016, - title = {Creativity Support Systems: {{A}} Systematic Mapping Study}, - shorttitle = {Creativity Support Systems}, - author = {Gabriel, A. and Monticolo, D. and Camargo, M. and Bourgault, M.}, - year = {2016}, - month = sep, - journal = {Thinking Skills and Creativity}, - volume = {21}, - pages = {109--122}, - issn = {1871-1871}, - doi = {10.1016/j.tsc.2016.05.009}, - urldate = {2023-01-06}, - abstract = {As part of the innovation process, creativity has become a critical dimension for organizations that wish to maintain their competitiveness. In order to foster the creativity potential within organizations, processes and systems need to be designed and integrated so that all stakeholders can participate in a coordinated and timely fashion, and despite the various dispersion levels that may separate them. Although many tools are already available on the market or being tested, a significant gap still exists between those products and the creativity process that they are supposed to support. To truly respond to the need for creativity in a distributed environment, it is suggested that the entire process be re-examined and understood so that future Creativity Support Systems can fulfil real needs. This paper is a systematic mapping study of the literature on existing digital tools dedicated to creativity. A thorough examination of over 49 digital tools is carried out, providing the action channel for emerging Creativity Support Systems that would better support collaboration diversity throughout the creative process.}, - langid = {english}, - keywords = {Computer-assisted creativity,Creative problem solving,Creative support system,Creativity process,Remote collaboration}, - file = {/Users/fabio/Zotero/storage/Y8EZIX4T/Gabriel et al_2016_Creativity support systems.pdf;/Users/fabio/Zotero/storage/MLILJRGU/S1871187116300293.html} -} - -@article{gabrielOpenSourceIoTbased2023, - title = {Open Source {{IoT-based}} Collection Bin Applied to Local Plastic Recycling}, - author = {Gabriel, Alex and Cruz, Fabio}, - year = {2023}, - month = mar, - journal = {HardwareX}, - volume = {13}, - pages = {e00389}, - issn = {2468-0672}, - doi = {10.1016/j.ohx.2022.e00389}, - urldate = {2023-01-20}, - abstract = {Plastic waste is a major challenge for policy making; it has a terrible impact on the environment if it is not properly managed. In order to mitigate this issue, recycling industries have emerged with the associated logistics chain that also has an environmental impact, notably with the production of greenhouse gas. In addition to using energy to transform plastic waste into source material, energy is also wasted to transport it. In parallel to reducing plastic waste, it may be recycled at a very local scale, reducing transportation and allowing potential improvement of the collecting process. Assuming that local transformation of plastic waste is possible, this article describes the design, assembly, and setup of the hardware, system architecture, and software of collectors that may be used by these recycling units. The specificity of these collectors is that they produces on-line data related to the quantity of waste collected. Once implemented, a network of smart collectors should allow the reduction of travel to collect waste as it notifies when the collectors are full. It also produces data on the scale of a territory to optimize the supply chain related to plastic waste collection. This article presents the design and engineering aspects as well as limitations induced by technical choices, but also potential improvements for future developments.}, - copyright = {Licencia Creative Commons Atribuci\'on-CompartirIgual 4.0 Internacional (CC-BY-SA)}, - langid = {english}, - keywords = {Distributed recycling,IoT,Smart waste management}, - file = {/Users/fabio/Zotero/storage/DRA6QEN4/Gabriel_Cruz_2023_Open source IoT-based collection bin applied to local plastic recycling.pdf;/Users/fabio/Zotero/storage/EGKTVHPK/S2468067222001341.html} -} - -@article{Gaikwad2018, - title = {Transformation of {{E-Waste Plastics}} into {{Sustainable Filaments}} for {{3D Printing}}}, - author = {Gaikwad, Vaibhav and Ghose, Anirban and Cholake, Sagar and Rawal, Aditya and Iwato, Mei and Sahajwalla, Veena}, - year = {2018}, - month = nov, - journal = {ACS Sustainable Chemistry \& Engineering}, - volume = {6}, - number = {11}, - pages = {14432--14440}, - issn = {2168-0485}, - doi = {10.1021/acssuschemeng.8b03105}, - file = {/Users/fabio/Zotero/storage/TX7MFS39/Transformation of E-Waste Plastics into Sustainable Filaments for 3D Printing.pdf} -} - -@article{galaCharacterizationPostconsumerPlastic2020, - title = {Characterization of Post-Consumer Plastic Film Waste from Mixed {{MSW}} in {{Spain}}: {{A}} Key Point for the Successful Implementation of Sustainable Plastic Waste Management Strategies}, - author = {Gala, Alberto and Guerrero, Marta and Serra, Jose Manuel}, - year = {2020}, - month = jun, - journal = {Waste Management}, - volume = {111}, - pages = {22--33}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.05.019}, - urldate = {2020-05-28} -} - -@article{Galantucci2009, - title = {Experimental Study Aiming to Enhance the Surface Finish of Fused Deposition Modeled Parts}, - author = {Galantucci, L.M. and Lavecchia, F. and Percoco, G.}, - year = {2009}, - month = jan, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {58}, - number = {1}, - pages = {189--192}, - issn = {00078506}, - doi = {10.1016/j.cirp.2009.03.071}, - urldate = {2013-03-14}, - file = {/Users/fabio/Zotero/storage/RPDBJGCY/Galantucci, Lavecchia, Percoco - 2009 - Experimental study aiming to enhance the surface finish of fused deposition modeled parts.pdf} -} - -@article{galarragagallasteguiUseEcolabelsReview2002, - title = {The Use of Eco-Labels: {{A}} Review of the Literature}, - author = {Galarraga Gallastegui, Ibon}, - year = {2002}, - month = dec, - journal = {European Environment}, - volume = {12}, - number = {6}, - pages = {316--331}, - doi = {10.1002/EET.304}, - urldate = {2021-09-16}, - abstract = {Labelling programs seek first to encourage a move towards more environmentally friendly consumption patterns, and second to induce productive structures, governments and other agents to increase the environmental standards of the products and services in the economy. This paper is devoted to revising the relevant literature on the issue. We divide the topic into three areas; (i) the study of demand, where most of the information available on the demand for labelled goods is presented; (ii) the study of supply, devoted to the analysis and summary of the information available in the literature and finally (iii) the market and trade impacts of labelling programmes, where the research carried out so far is carefully presented. The paper reveals the lack of proper and conclusive research to date, as well as the complexity of the topic of research. Copyright \textcopyright{} 2002 John Wiley \& Sons, Ltd and ERP Environment.}, - file = {/Users/fabio/Zotero/storage/C269T2NT/full-text.pdf} -} - -@article{galatiPlasticNotPlastic2021, - title = {Plastic or Not Plastic? {{That}}'s the Problem: Analysing the {{Italian}} Students Purchasing Behavior of Mineral Water Bottles Made with Eco-Friendly Packaging}, - author = {Galati, Antonino and Alaimo, Leonardo Salvatore and Ciaccio, Teresa and Vrontis, Demetris and Fiore, Mariantonietta}, - year = {2021}, - month = nov, - journal = {Resources, Conservation and Recycling}, - pages = {106060}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106060}, - urldate = {2021-11-30} -} - -@article{galazArtificialIntelligenceSystemic2021, - title = {Artificial Intelligence, Systemic Risks, and Sustainability}, - author = {Galaz, Victor and Centeno, Miguel A. and Callahan, Peter W. and Causevic, Amar and Patterson, Thayer and Brass, Irina and Baum, Seth and Farber, Darryl and Fischer, Joern and Garcia, David and McPhearson, Timon and Jimenez, Daniel and King, Brian and Larcey, Paul and Levy, Karen}, - year = {2021}, - month = nov, - journal = {Technology in Society}, - volume = {67}, - pages = {101741}, - publisher = {{Pergamon}}, - issn = {0160-791X}, - doi = {10.1016/J.TECHSOC.2021.101741}, - urldate = {2021-09-21} -} - -@article{Gall2020, - title = {Building a Circular Plastics Economy with Informal Waste Pickers: {{Recyclate}} Quality, Business Model, and Societal Impacts}, - author = {Gall, Markus and Wiener, Melanie and {Chagas de Oliveira}, Cintia and Lang, Reinhold W. and Hansen, Erik G.}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {156}, - pages = {104685}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104685} -} - -@article{Gallardo2016, - title = {The Determination of Waste Generation and Composition as an Essential Tool to Improve the Waste Management Plan of a University}, - author = {Gallardo, A. and {Edo-Alc{\'o}n}, N. and Carlos, M. and Renau, M.}, - year = {2016}, - month = jul, - journal = {Waste Management}, - volume = {53}, - pages = {3--11}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2016.04.013}, - urldate = {2020-04-08}, - abstract = {When many people work in organized institutions or enterprises, those institutions or enterprises become big meeting places that also have energy, water and resources necessities. One of these necessities is the correct management of the waste that is daily produced by these communities. Universities are a good example of institution where every day a great amount of people go to work or to study. But independently of their task, they use the different services at the University such as cafeterias, canteens, and photocopy and as a result of their activity a cleaning service is also needed. All these activities generate an environmental impact. Nowadays, many Universities have accepted the challenge to minimize this impact applying several measures. One of the impacts to be reduced is the waste generation. The first step to implement measures to implement a waste management plan at a University is to know the composition, the amount and the distribution of the waste generated in its facilities. As the waste composition and generation depend among other things on the climate, these variables should be analysed over one year. This research work estimates the waste generation and composition of a Spanish University, the Universitat Jaume I, during a school year. To achieve this challenge, all the waste streams generated at the University have been identified and quantified emphasizing on those which are not controlled. Furthermore, several statistical analyses have been carried out to know if the season of the year or the day of the week affect waste generation and composition. All this information will allow the University authorities to propose a set of minimization measures to enhance the current management.}, - keywords = {Composition,Generation,Management,University,Waste} -} - -@article{Gallego-Schmid2020, - title = {Links between Circular Economy and Climate Change Mitigation in the Built Environment}, - author = {{Gallego-Schmid}, Alejandro and Chen, Han-Mei and Sharmina, Maria and Mendoza, Joan Manuel F.}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {260}, - pages = {121115}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121115}, - urldate = {2020-03-23} -} - -@article{Gallego2021, - title = {Main Challenges during Project Planning When Working with Virtual Teams}, - author = {Gallego, J.S. and {Ortiz-Marcos}, I. and Romero Ruiz, J.}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120353}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120353}, - urldate = {2020-10-19}, - abstract = {This study confirms the need to correctly plan human resources, risk and communication management when virtual teams are included in a project team, as indicated in the literature review. his study extends the current literature in the field, in a way not previously identified by other authors, by identifying the importance of virtual teams in the requirements collection and scope management processes during project planning. It is demonstrated that project managers should consider the impact of virtual teams on integration and scope planning and not simply on resources, communication and cost planning. In this study, the use of fuzzy set Qualitative Comparative Analysis (fsQCA) is a key methodological contribution to indicate hidden or unknown impacts of virtual teams in certain key project planning processes.}, - keywords = {fsQCA,Integration planning,Project planning,Virtual teams}, - file = {/Users/fabio/Zotero/storage/Q5A22R36/full-text.pdf} -} - -@article{gallegosanchez20RelationshipsRelationalCoordination2021, - title = {{{20Relationships}} among Relational Coordination Dimensions: {{Impact}} on the Quality of Education Online with a Structural Equations Model}, - author = {Gallego S{\'a}nchez, Mar{\'i}a del Carmen and {De-Pablos-Heredero}, Carmen and {Medina-Merodio}, Jose Amelio and {Robina-Ram{\'i}rez}, Rafael and {Fernandez-Sanz}, Luis}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120608}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120608}, - urldate = {2021-02-14}, - abstract = {Online education is quite often applied to university systems. This kind of education does not present scheduled restrictions to students and provides additional flexibility to the learning process. This together with the improvements provided by the application of information and communications technology (ICT) in higher education online systems allows them to reach higher degrees of the coordination and integration of processes by improving the competitiveness and research capacity of these organizations. Relational coordination is a validated tool for measuring and analyzing the quality of communication and relationships amongst participants of any process by considering functional organizational boundaries. The goal of this study is the analysis of the relationship between the relational coordination and the quality of online education systems at universities. A questionnaire has been built and distributed to 243 students. Data were processed by using the structural equation modeling (SEM) technique. Results show that higher levels of relational coordination at a university lead to higher levels of the quality of education.}, - keywords = {Communication,Digital transformation,Higher education,Online education,Quality,Relational coordination,Relationships} -} - -@article{galloujInnovationServices1997, - title = {Innovation in Services}, - author = {Gallouj, Fa{\"i}z and Weinstein, Olivier}, - year = {1997}, - month = dec, - journal = {Research Policy}, - volume = {26}, - number = {4}, - pages = {537--556}, - issn = {0048-7333}, - doi = {10.1016/S0048-7333(97)00030-9}, - urldate = {2023-01-16}, - abstract = {The purpose of this article is to lay the foundations of a theory that can be used to interpret innovation processes in the service sector. The hypothesis underpinning this article is based on Lancaster's definition of the product (in both manufacturing and services) as a set of service characteristics [Lancaster, K.J., 1966. A New Approach to Consumer Theory. J. Political Economy 14, 133\textendash 156.]. The article follows the example of those who have sought to apply Lancaster's work to technological phenomena. Various modes of innovation in the service sectors are highlighted and illustrated.}, - langid = {english}, - keywords = {Innovation,Lancasterian representation,Service sector}, - file = {/Users/fabio/Zotero/storage/L6HVCW32/Gallouj_Weinstein_1997_Innovation in services.pdf;/Users/fabio/Zotero/storage/SLWX7ZHQ/S0048733397000309.html} -} - -@article{galvaoValueStreamPerspective2020, - title = {Towards a Value Stream Perspective of Circular Business Models}, - author = {Galv{\~a}o, Graziela Darla Araujo and Homrich, Aline Sacchi and Geissdoerfer, Martin and Evans, Steve and scoleze Ferrer, Paulo Sergio and Carvalho, Marly M.}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105060}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105060}, - urldate = {2020-08-09}, - abstract = {Circular business models could minimise material input into and leakage out of the economic system and play an essential role in utilising the resources and capabilities of the private sector for the transition to more sustainable economic development. Despite the growing prominence of the Circular Business Model concept in research and practice, there is still considerable uncertainty on how to implement these new circular business models in existing global supply chains. Equivalent haziness also lies on the value streams it creates. To address this gap, a comprehensive literature review on ``circular economy'' and ``business models'' was conducted by employing content analysis with detailed code trees. The results led to several findings. First, we identified the key conceptual dimensions of circular business models, their theoretical approaches, drives and barriers, sustainability trade-offs amongst triple bottom-line perspectives and types, and value streams within circular business models and their ecosystems. Then, we designed conceptual mind maps to analyse the relationships between categories, illustrating the positive and negative interactions between key stakeholders. Finally, we proposed a circular business model framework that brings the novelty of connecting value streams within circular business models and their ecosystems. It allows the assessment of the positive and negative interactions between the circular business model building blocks in a systematic way.}, - keywords = {Business model,Circular economy,Framework,Sustainability,Value flow} -} - -@article{galvinBibliometricContentAnalysis2021, - title = {A Bibliometric Content Analysis of Do-It-Yourself ({{DIY}}) Science: Where to from Here for Management Research?}, - author = {Galvin, Peter and Klarin, Anton and Nyuur, Richard and Burton, Nicholas}, - year = {2021}, - month = aug, - journal = {https://doi.org/10.1080/09537325.2021.1959031}, - pages = {1--12}, - publisher = {{Routledge}}, - doi = {10.1080/09537325.2021.1959031}, - urldate = {2021-08-24}, - abstract = {Do-it-yourself (DIY) science research is currently in an expansion phase both in terms of its depth (with an increasing number of papers published each year) and its scope (with the core ideas bein...}, - keywords = {bibliometric content analysis,DIY science,institutional science}, - file = {/Users/fabio/Zotero/storage/N8QY9M3V/full-text.pdf} -} - -@article{galvinLeveragingInterindustrySpillovers2020, - title = {Leveraging Inter-Industry Spillovers through {{DIY}} Laboratories: {{Entrepreneurship}} and Innovation in the Global Bicycle Industry}, - author = {Galvin, Peter and Burton, Nicholas and Nyuur, Richard}, - year = {2020}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {160}, - pages = {120235}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120235}, - urldate = {2020-08-13}, - abstract = {DIY laboratories have the potential to advance new technologies, products and services through the leveraging of low-cost facilities by entrepreneurial individuals. We add to this emerging understanding of the DIY phenomenon by investigating the prevalence, operations and contextual factors that impact the use of DIY laboratories in the bicycle industry. We find two contexts in which DIY laboratories are utilised to develop component-level innovations: first, DIY laboratories are utilised as a low-cost way to enter an industry where the entrepreneur lacks the necessary financial resources and rely upon bootstrapping to build their enterprise. Second, and more frequently, DIY laboratories were used for the integration of diversified technical knowledge originating in other industries. Our study highlights the important role that DIY laboratories may play in leveraging inter-industry knowledge spillovers whereby DIY laboratories operate as incubators in the repurposing of diversified knowledge from high-technology sectors to lower-technology sectors to generate incremental innovation. Further, the modular product architecture of the bicycle helped facilitate the co-opting of technical knowledge prevalent in other industries by allowing entrepreneurs to focus their product development and subsequent commercialisation activities at the component level of the product artefact.}, - keywords = {DIY laboratories,Exaptation,Knowledge spillover,Modularity}, - file = {/Users/fabio/Zotero/storage/UT4PNJU2/full-text.pdf} -} - -@article{Gama2018, - title = {Polyurethane {{Foams}}: {{Past}}, {{Present}}, and {{Future}}}, - author = {Gama, Nuno and Ferreira, Artur and {Barros-Timmons}, Ana}, - year = {2018}, - month = sep, - journal = {Materials}, - volume = {11}, - number = {10}, - pages = {1841}, - issn = {1996-1944}, - doi = {10.3390/ma11101841}, - abstract = {Polymeric foams can be found virtually everywhere due to their advantageous properties compared with counterparts materials. Possibly the most important class of polymeric foams are polyurethane foams (PUFs), as their low density and thermal conductivity combined with their interesting mechanical properties make them excellent thermal and sound insulators, as well as structural and comfort materials. Despite the broad range of applications, the production of PUFs is still highly petroleum-dependent, so this industry must adapt to ever more strict regulations and rigorous consumers. In that sense, the well-established raw materials and process technologies can face a turning point in the near future, due to the need of using renewable raw materials and new process technologies, such as three-dimensional (3D) printing. In this work, the fundamental aspects of the production of PUFs are reviewed, the new challenges that the PUFs industry are expected to confront regarding process methodologies in the near future are outlined, and some alternatives are also presented. Then, the strategies for the improvement of PUFs sustainability, including recycling, and the enhancement of their properties are discussed.} -} - -@article{Gamon2013a, - title = {Twin-Screw Extrusion Impact on Natural Fibre Morphology and Material Properties in Poly(Lactic Acid) Based Biocomposites}, - author = {Gamon, G. and Evon, {\relax Ph}. and Rigal, L.}, - year = {2013}, - month = apr, - journal = {Industrial Crops and Products}, - volume = {46}, - pages = {173--185}, - publisher = {{Elsevier B.V.}}, - issn = {09266690}, - doi = {10.1016/j.indcrop.2013.01.026}, - urldate = {2014-07-17}, - keywords = {twin-screw extrusion}, - file = {/Users/fabio/Zotero/storage/PQ7XYAQI/Gamon, Evon, Rigal - 2013 - Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based b.pdf} -} - -@article{Gan2020, - title = {Simulation Optimisation towards Energy Efficient Green Buildings: {{Current}} Status and Future Trends}, - author = {Gan, Vincent J.L. and Lo, Irene M.C. and Ma, Jun and Tse, K.T. and Cheng, Jack C.P. and Chan, C.M.}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {254}, - pages = {120012}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120012} -} - -@article{Ganesh2019, - title = {Collection of {{Garbage}} Using {{Internet}} of {{Things}}}, - author = {Ganesh, N. and Narayanan, R. C.}, - year = {2019}, - month = aug, - journal = {International Journal of Engineering and Advanced Technology}, - volume = {8}, - number = {6}, - pages = {3481--3483}, - publisher = {{Blue Eyes Intelligence Engineering and Sciences Publication}}, - issn = {2249-8958}, - doi = {10.35940/ijeat.F9523.088619}, - urldate = {2020-04-08}, - abstract = {Due to rise in population, the waste disposed by human has become enormous. This paper deals with a real time practical application of designing and building a prototype for an automatic opening and closing of dustbin on the detection of the human intervention who wish to throw out their trash. In this system the level of garbage in the bin can be known by the use of sensors. Each dustbin has a unique ID. If the garbage in the bin reaches the threshold level, the garbage collectors are given information based on which they can collect the garbage. In case the dustbins reach threshold level, user will not be able to access the bin. In order to avoid the decaying smell around the bin the harmless chemical sprinklers are used. Further, the garbage is segregated into bio degradable and non-biodegradable wet and dry waste using a conveyor belt. Internally electric oven burns the dry waste and the ashes are used for certain applications such as in cleaning the pond and in preventing the growth of algae in the pond water. The wet wastes are made to decompose and it acts as a fertilizer to the fields. The plastic wastes collected are used in building plastic tar roads}, - keywords = {Arduino Uno,Chemical sprinklers,Conveyor belt,Garbage,GPS,GSM,Internet of Things,Material handling,Smart Dustbin,Ultrasonic sensors}, - file = {/Users/fabio/Zotero/storage/LXP9VZJL/m-api-07033f4d-2dee-03cb-400f-03dce0a2d2c4.pdf} -} - -@article{Gantenbein2018, - title = {Three-Dimensional Printing of Hierarchical Liquid-Crystal-Polymer Structures}, - author = {Gantenbein, Silvan and Masania, Kunal and Woigk, Wilhelm and Sesseg, Jens P. W. and Tervoort, Theo A. and Studart, Andr{\'e} R.}, - year = {2018}, - month = sep, - journal = {Nature}, - volume = {561}, - number = {7722}, - pages = {226--230}, - issn = {0028-0836}, - doi = {10.1038/s41586-018-0474-7}, - file = {/Users/fabio/Zotero/storage/N6QLIRA9/Three-dimensional printing of hierarchical liquid-crystal-polymer structures.pdf} -} - -@article{Gao2015, - title = {The Status, Challenges, and Future of Additive Manufacturing in Engineering}, - author = {Gao, Wei and Zhang, Yunbo and Ramanujan, Devarajan and Ramani, Karthik and Chen, Yong and Williams, Christopher B. and Wang, Charlie C.L. and Shin, Yung C. and Zhang, Song and Zavattieri, Pablo D.}, - year = {2015}, - journal = {Computer-Aided Design}, - volume = {69}, - pages = {65--89}, - publisher = {{Elsevier Ltd}}, - issn = {00104485}, - doi = {10.1016/j.cad.2015.04.001}, - abstract = {Additive manufacturing (AM) is poised to bring about a revolution in the way products are designed, manufactured and distributed to end users. This technology has gained significant academic as well as industry interest due to its ability to create complex geometries with customizable material properties. AM has also inspired the development of the maker movement by democratizing design and manufacturing. Due to the rapid proliferation of a wide variety of technologies associated with AM, there is a lack of a comprehensive set of design principles, manufacturing guidelines, and standardization of best practices. These challenges are compounded by the fact that advancements in multiple technologies (for example materials processing, topology optimization) generate a ``positive feedback loop'' effect in advancing AM. In order to advance research interest and investment in AM technologies, some fundamental questions and trends about the dependencies existing in these avenues need highlighting. The goal of our review paper is to organize this body of knowledge surrounding AM, and present current barriers, findings and future trends significantly to the researchers. We also discuss fundamental attributes of AM processes, evolution of the AM industry, and the affordances enabled by the emergence of AM in a variety of areas such as geometry processing, material design and education. We conclude our paper by pointing out future directions such as the ``print-it-all'' paradigm, that have the potential to re-imagine current research and spawn completely new avenues for exploration.}, - isbn = {0010-4485}, - keywords = {3D printing,Additive manufacturing,Commercial marketplace,Functionally gradient material,Geometric processing,Heterogeneous material,Intellectual property,Maker movement,Open-source machine,Personal fabrication,Topology optimization}, - file = {/Users/fabio/Zotero/storage/8F4CH8JV/The status, challenges, and future of additive manufacturing in engineering.pdf} -} - -@article{Gao2019, - title = {Pathways towards Regional Circular Economy Evaluated Using Material Flow Analysis and System Dynamics}, - author = {Gao, Chengkang and Gao, Chengbo and Song, Kaihui and Fang, Kejing}, - year = {2019}, - month = nov, - journal = {Resources, Conservation and Recycling}, - pages = {104527}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104527} -} - -@article{gaoEvaluatingCircularEconomy2021, - title = {Evaluating Circular Economy Performance Based on Ecological Network Analysis: {{A}} Framework and Application at City Level}, - author = {Gao, Han and Tian, Xin and Zhang, Yan and Shi, Lei and Shi, Feng}, - year = {2021}, - month = jan, - journal = {Resources, Conservation and Recycling}, - pages = {105257}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105257}, - urldate = {2021-02-14}, - abstract = {Confronting intense resource and environmental pressures, China initiated circular economy (CE) strategies and has implemented promoting local practice to approach the challenge. Cities are key policy executors in promoting CE policies. To evaluate a city's CE performance, most studies have adopted only indicators. However, the correlation between CE indicators and the internal socioeconomic metabolic system is unclear but important to understand the formation mechanism of CE performance. Therefore, this study aims to establish a correlation via ecological network analysis and provides an analytical framework to explore the mechanism behind CE performance. Taking 16 cities of Shandong Province as example, a city's ecological network model with 9 sectors was constructed to identify the key factors based on standardized material flow accounting. The results showed that a strong positive correlation presented between urban resource productivity and the economic development level. Recycling industry in the cities with higher recycling rate had a more prominent function in urban system because of their large volumes and the great effects on other sectors. CE performances were mainly affected by the key sectors including manufacturing, mining and internal environment (IE) that have large effects or specific ecological relationships with the recycling industry (RI) and IE. The sectors in mutualism or competition relationships with RI benefitted or inhibited city's CE performance, respectively. The sectors that presented a resource-exploitation relationship or control relationship with IE limited city's CE performance. Our research provides a method for analyzing a city's CE performance from the perspective of socioeconomic metabolism.}, - keywords = {Circular economy,Ecological network analysis,Indicators,Performance evaluation} -} - -@article{gaoExploringDomainOpen2020, - title = {Exploring the Domain of Open Innovation: Bibliometric and Content Analyses}, - author = {Gao, Hui and Ding, Xiuhao and Wu, Suming}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {275}, - pages = {122580}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2020.122580}, - urldate = {2020-08-09}, - abstract = {This is a PDF file of an article that has undergone enhancements after acceptance, such as the addition of a cover page and metadata, and formatting for readability, but it is not yet the definitive version of record. This version will undergo additional copyediting, typesetting and review before it is published in its final form, but we are providing this version to give early visibility of the article. Please note that, during the production process, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.}, - keywords = {Bibliometric analysis,CiteSpace,Content analysis,Open innovation (OI),Visualization} -} - -@article{gaoMacroandMicroplasticsEmerging2022, - title = {Macro-and/or Microplastics as an Emerging Threat Effect Crop Growth and Soil Health}, - author = {Gao, Haihe and Liu, Qin and Yan, Changrong and Mancl, Karen and Gong, Daozhi and He, Jiuxing and Mei, Xurong}, - year = {2022}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {186}, - pages = {106549}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106549}, - urldate = {2022-08-10}, - abstract = {Pollution caused by macro- and microplastics has become a global concern that is ubiquitous throughout the environment. The reported impacts of macro-and/or microplastics in soil were mixed without uniform conclusions. Here, we quantitatively analyzed the effects of macro-and microplastics on crop growth and soil health using a global meta-analysis, based on 2,226 paired field/ laboratory measurements from 141 papers published in the literature. The results show that the unabated accumulation of macro-and/or microplastics negatively impacts crop growth and soil health. Overall, there were no significant effects on crop-soil properties of macroplastics between 30 and 240~kg/ha excluding soil water infiltration rate, but the crop-soil properties were negatively impacted with time and macroplastics over 240~kg/ha excluding soil olsen-potassium. There were no significant effect on crop-soil animal properties of microplastics between 0.01 and 100~mg/kg excluding weight, but the crop-soil animal properties impacts were negative with time and microplastics over 10,000~mg/kg excluding plant chlorophyll. Using a random forest model (RF) trained with crop/ animal and macro-and/or microplastics factors, we found that the response of crop growth and soil health to macro-and/or microplastics was related to plastic content, plastic type, plastic size and crop/ animal type variables. Altogether, our findings of macro-and microplastics impacts on crop growth and soil health are crucial to policy-making related to agricultural sustainable development under global change.}, - langid = {english}, - keywords = {Crop growth,Macro- and microplastics,Meta-analysis,Random forest analysis,Soil health}, - file = {/Users/fabio/Zotero/storage/3PAMCGEQ/S0921344922003858.html} -} - -@article{gaoWhenOneCannot2022, - title = {When One Cannot Bypass the Byproducts: {{Plastic}} Packaging Waste Embedded in Production and Export}, - author = {Gao, Xiang and Dall'erba, Sandy and Ellison, Brenna and Avelino, Andre F. T. and Yang, Cuihong}, - year = {2022}, - month = may, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13282}, - urldate = {2022-05-28}, - abstract = {While packaging is praised for reducing waste of perishable food products, packaging waste is a growing concern. Its least recyclable type, plastics waste, is increasingly polluting the marine environment and many developing countries are now refusing to take the waste from developed countries. Before responsibility can be established, one has to identify the key producers and consumers. This paper adjusts the packaging waste satellite account in EXIOBASE 3 by combining the official waste data published by the World Bank. Based on input-output methods, we find that the world's top suppliers of plastic packaging waste are the United States, China, and Brazil. Food and beverage products constitute the bulk of the problem. Yet, 21\% of these countries' plastic packaging waste is induced export. At the global level, it is 25.8\%. About 76.0\% of export-induced plastic packaging waste corresponds to packaging of the exported goods that will ultimately be disposed of in the destination country; while the others correspond to the packaging used in their supply-chain and wasted domestically. We conclude that international efforts need to assign shared responsibility and promote improvement in plastic packaging recyclability.}, - keywords = {environment responsibility,environmental footprint,global value chain,industrial ecology,input,output analysis,plastic packaging waste}, - file = {/Users/fabio/Zotero/storage/C6CZFN72/full-text.pdf} -} - -@article{Garai2020, - title = {Multi-Objective Optimization of Cost-Effective and Customer-Centric Closed-Loop Supply Chain Management Model in {{T-environment}}}, - author = {Garai, Arindam and Roy, Tapan K.}, - year = {2020}, - month = jan, - journal = {Soft Computing}, - volume = {24}, - number = {1}, - pages = {155--178}, - issn = {1432-7643}, - doi = {10.1007/s00500-019-04289-5} -} - -@article{Garboczi2020, - title = {Particle Shape and Size Analysis for Metal Powders Used for Additive Manufacturing: {{Technique}} Description and Application to Two Gas-Atomized and Plasma-Atomized {{Ti64}} Powders}, - author = {Garboczi, E.J. and Hrabe, N.}, - year = {2020}, - month = jan, - journal = {Additive Manufacturing}, - volume = {31}, - pages = {100965}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100965} -} - -@article{garcia-colladoAdvancesPolymersBased2022, - title = {Advances in Polymers Based {{Multi-Material Additive-Manufacturing Techniques}}: {{State-of-art}} Review on Properties and Applications}, - author = {{Garc{\'i}a-Collado}, A. and Blanco, J.M. and Gupta, Munish Kumar and {Dorado-Vicente}, R.}, - year = {2022}, - month = feb, - journal = {Additive Manufacturing}, - volume = {50}, - pages = {102577}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102577}, - urldate = {2022-01-17} -} - -@article{Garcia-Dominguez2020, - title = {Considerations on the {{Applicability}} of {{Test Methods}} for {{Mechanical Characterization}} of {{Materials Manufactured}} by {{FDM}}}, - author = {{Garc{\'i}a-Dom{\'i}nguez}, Amabel and Claver, Juan and Camacho, Ana Mar{\'i}a and Sebasti{\'a}n, Miguel A.}, - year = {2019}, - month = dec, - journal = {Materials}, - volume = {13}, - number = {1}, - pages = {28}, - issn = {1996-1944}, - doi = {10.3390/ma13010028}, - abstract = {The lack of specific standards for characterization of materials manufactured by Fused Deposition Modelling (FDM) makes the assessment of the applicability of the test methods available and the analysis of their limitations necessary; depending on the definition of the most appropriate specimens on the kind of part we want to produce or the purpose of the data we want to obtain from the tests. In this work, the Spanish standard UNE 116005:2012 and international standard ASTM D638\textendash 14:2014 have been used to characterize mechanically FDM samples with solid infill considering two build orientations. Tests performed according to the specific standard for additive manufacturing UNE 116005:2012 present a much better repeatability than the ones according to the general test standard ASTM D638\textendash 14, which makes the standard UNE more appropriate for comparison of different materials. Orientation on-edge provides higher strength to the parts obtained by FDM, which is coherent with the arrangement of the filaments in each layer for each orientation. Comparison with non-solid specimens shows that the increase of strength due to the infill is not in the same proportion to the percentage of infill. The values of strain to break for the samples with solid infill presents a much higher deformation before fracture.}, - keywords = {ABS,Additive manufacturing,Anisotropy,ASTM D638-14:2014,FDM,Infill density,ISO 527-2:2012,Layer orientation}, - file = {/Users/fabio/Zotero/storage/GDCQV47T/materials-13-00028.pdf} -} - -@article{garcia-gonzalezApproachesTeachingLearning2020, - title = {Approaches to Teaching and Learning for Sustainability: {{Characterizing}} Students' Perceptions}, - author = {{Garc{\'i}a-Gonz{\'a}lez}, Esther and {Jim{\'e}nez-Fontana}, Roc{\'i}o and Goded, Pilar Azc{\'a}rate}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {274}, - pages = {122928}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122928}, - urldate = {2020-08-09}, - abstract = {Sustainability needs to become part of the training of prospective teachers as they will be responsible for educating future generations from this perspective. In this regard, the study objective was to determine the perceptions of a group of Master's degree students in Education about today's social and environmental problems and about the concept of sustainability, and to identify their teacher-training needs in Education for Sustainability. The results are intended to help improve the framework of teacher training through the integration of sustainability. The study context was that of Master's courses in Secondary Education Teacher Training and in Educational Research for Teachers' Professional Development. The study design was exploratory, descriptive, and interpretive, with mixed qualitative and quantitative data analysis. The sample comprised 116 graduate students. For data collection, an ad hoc questionnaire was used which had previously been validated by experts in sustainability. The results reflected a superficial perception of sustainability that was linked to the environmental dimension. This could have been a reflection of the participants' lack of knowledge concerning today's main social and environmental problems. The participants' principal demands with respect to their training were to deepen their knowledge about these problems and about methods they could use to include sustainability in their future classes.}, - keywords = {Learning methods,Social and environmental problems,Sustainability,Teacher training,Teaching methods} -} - -@article{Garcia-Guzman2013, - title = {A Process Reference Model for Managing Living Labs for {{ICT}} Innovation: {{A}} Proposal Based on {{ISO}}/{{IEC}} 15504}, - author = {{Garc{\'i}a-Guzm{\'a}n}, Javier and {Fern{\'a}ndez del Carpio}, Alvaro and {de Amescua}, Antonio and Velasco, Manuel}, - year = {2013}, - month = nov, - journal = {Computer Standards \& Interfaces}, - volume = {36}, - number = {1}, - pages = {33--41}, - issn = {09205489}, - doi = {10.1016/j.csi.2013.07.004}, - abstract = {Living Labs are innovation infrastructures where software companies and research organizations collaborate with lead users to design and develop new products and services. There is not any reference model related to the processes or practices to manage a living lab. This article presents a reference model to manage effectively the synergies of software companies with the other stakeholders participating in a living lab. The article describes the approach used to create the reference model through the analysis of a multiple case study considering six living labs and discusses the lessons learned during the creation of the process reference model.}, - keywords = {Case study,Evaluation,Living lab,Open innovation,User-driven innovation} -} - -@article{Garcia-Leon2021, - title = {Scientometric {{Review}} of {{Trends}} on the {{Mechanical Properties}} of {{Additive Manufacturing}} and {{3D Printing}}}, - author = {{Garc{\'i}a-Le{\'o}n}, R. A. and {G{\'o}mez-Camperos}, J. A. and Jaramillo, H. Y.}, - year = {2021}, - month = feb, - journal = {Journal of Materials Engineering and Performance}, - pages = {1--11}, - publisher = {{Springer}}, - issn = {1059-9495}, - doi = {10.1007/s11665-021-05524-7}, - urldate = {2021-02-16}, - abstract = {Nowadays, the challenges of the industry increasingly demand the manufacture of complex shapes with great design flexibility without waste by 3D printing. Additive manufacturing, unlike traditional manufacturing techniques such as casting and machining, enables designers to rapid prototype while lowering operating costs and material waste during this process. In this way, understanding the current state of the literature related to additive manufacturing processes and the mechanical properties of 3D printed materials is of high importance to determine a research horizon in developing future works of this topic. In this paper, a bibliometric analysis, also named Scientometric science, was implemented. The tendencies and transcendental topics were determined using the Bibliometrix package for R and VOSviewer. Data were exported directly from the Scopus database with a search equation. The results showed that, of the 1271 documents analyzed, 2015 is a year where the research began its developing stage, with a growth rate of 20.8\%. The USA resulted to be a leading country in publications followed by China and the UK. Likewise, it is observed that the author with the highest number of publications and h-index is C.B. Williams, followed by A.A. Zadpoor and J. Muller. Besides, the evolution in time of the keywords most used by researchers, and trends and research gaps in the study of additive manufacturing with the mechanical properties of the 3D printing materials are presented.}, - keywords = {Characterization and Evaluation of Materials,Corrosion and Coatings,Engineering Design,Quality Control,Reliability,Safety and Risk,Tribology}, - file = {/Users/fabio/Zotero/storage/F9MY3FXJ/García-León2021_Article_ScientometricReviewOfTrendsOnT.pdf} -} - -@article{garcia-muinaIndustry0basedDynamic2021, - title = {Industry 4.0-Based Dynamic {{Social Organizational Life Cycle Assessment}} to Target the Social Circular Economy in Manufacturing}, - author = {{Garc{\'i}a-Mui{\~n}a}, Fernando and {Medina-Salgado}, Mar{\'i}a Sonia and {Gonz{\'a}lez-S{\'a}nchez}, Roc{\'i}o and {Huertas-Valdivia}, Irene and Ferrari, Anna Maria and {Settembre-Blundo}, Davide}, - year = {2021}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {327}, - pages = {129439}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129439}, - urldate = {2021-11-07} -} - -@article{Garcia-Nunes2018, - title = {Using a Conceptual System for Weak Signals Classification to Detect Threats and Opportunities from Web}, - author = {{Garcia-Nunes}, Pedro Ivo and {da Silva}, Ana Estela Antunes}, - year = {2018}, - month = nov, - journal = {Futures}, - issn = {00163287}, - doi = {10.1016/j.futures.2018.11.004} -} - -@article{Garcia-Vazquez2021, - title = {The Invisible Enemy. {{Public}} Knowledge of Microplastics Is Needed to Face the Current Microplastics Crisis}, - author = {{Garcia-Vazquez}, Eva and {Garcia-Ael}, Cristina}, - year = {2021}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {28}, - pages = {1076--1089}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.07.032}, - urldate = {2021-08-24}, - abstract = {Microplastics are emerging pollutants that threaten marine resources globally today. Being difficult to see for the human eye, their public perception and risk perception depend upon the information given to citizens. Since the psychosocial theory postulates the importance of knowledge, attitude, and perceived control to undertake pro-environmental behaviors, in this review we have analyzed relevant literature in order to look for solutions of psychosocial nature to stop microplastic emissions. We employed qualitative contingency statistics and clustering analysis of relevant terms. The consumer's knowledge about microplastics was central and directly connected with the willingness to adopt a pro-environmental behavior, while risk perception and perceived control were less important. Significant geographical gaps and differences between cultures were identified. Based on our analyses, the following measures are recommended: 1) Create baselines of knowledge about microplastics to design ad-hoc interventions for their control; 2) Explore the role of environmental values as mediators between knowledge and behavior against microplastics; 3) Enlarge the geographical scope of present studies, at least to include African countries; 4) Undertake intercultural studies to determine the scale of interventions for public awareness about the problem; 5) Study the perspective of the industry, politicians and journalists; 6) Improve scientific communication about this new threat; 7) Introduce the topic in formal and non-formal education settings.}, - keywords = {Collective and individual actors,Global microplastic crisis,Intercultural differences,Knowledge,Psychosocial perspective,Risk perception}, - file = {/Users/fabio/Zotero/storage/CPRBZWUG/Garcia-Vazquez, Garcia-Ael - 2021 - Sustainable Production and Consumption The invisible enemy. Public knowledge of microplastics is nee.pdf} -} - -@article{garcia-velasquezCanWeImprove2022, - title = {Can We Improve the Environmental Benefits of Biobased {{PET}} Production through Local Biomass Value Chains? \textendash{} {{A}} Life Cycle Assessment Perspective}, - shorttitle = {Can We Improve the Environmental Benefits of Biobased {{PET}} Production through Local Biomass Value Chains?}, - author = {{Garc{\'i}a-Vel{\'a}squez}, Carlos and {van der Meer}, Yvonne}, - year = {2022}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {380}, - pages = {135039}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.135039}, - urldate = {2022-12-12}, - abstract = {The transition to a bioeconomy is one of the ambitions of the European Union for 2030. Biobased industries play an essential role in this transition. However, there has been an on-going discussion about the actual benefit of using biomass to produce biobased products, specifically the use of agricultural materials (e.g., corn and sugarcane). This paper presents the environmental impact assessment of 30\% and 100\% biobased polyethylene terephthalate production using European biomass supply chains (e.g., sugar beet, wheat, and miscanthus). An integral assessment between the life cycle assessment methodology and the global sensitivity assessment is presented as an early-stage support tool to propose and select supply chains that improve the environmental performance of biobased polyethylene terephthalate production. From the results, miscanthus is the best option for the production of biobased polyethylene terephthalate: promoting European local supply chains, reducing greenhouse gas emissions (process and land-use change), and generating lower impacts in midpoint categories related to resource depletion, ecosystem quality, and human health. This tool can help improving the environmental performance of processes that could boost the shift to a bioeconomy.}, - langid = {english}, - keywords = {Global sensitivity analysis,Life cycle assessment,Local biomass supply chains,Support tools}, - file = {/Users/fabio/Zotero/storage/9HRYG22U/García-Velásquez_van der Meer_2022_Can we improve the environmental benefits of biobased PET production through.pdf;/Users/fabio/Zotero/storage/WXETGHDU/S0959652622046121.html} -} - -@article{Garcia2014, - title = {Comparison of Different Extrusion Processes for Cleaning the Recycled Polypropylene Removing Volatile and Non-Volatile Contaminants}, - author = {Garcia, Pamela Sierra and Cruz, Sandra Andrea and Ner{\'i}n, Cristina}, - year = {2014}, - journal = {Progress in Rubber, Plastics and Recycling Technology}, - volume = {30}, - number = {1}, - pages = {37--54}, - issn = {14782413}, - doi = {10.1177/147776061403000103}, - abstract = {Many studies have been carried out in order to enable the use of recycled polymers in food packaging. The main problem is the presence of residual contaminants in recycled plastic, because it could pose a risk to public health when in contact with food. Our purpose is to evaluate different types of mechanical recycling in order to decontaminate the polypropylene. Firstly, pellets of polypropylene were contaminated, following the protocol recommended by the FDA. The pellets were subsequently recovered (washed and dried) and the samples were submitted to different extrusion processes. In order to evaluate the decontamination degree of the samples that went through each type of mechanical recycling, extractability tests were performed under different conditions of time, temperature and using different food simulants. The surrogates that migrated (suffered forced migration) were quantified using chromatographic techniques. The results showed that the decontamination degree of the samples changed with the different methods of extrusion applied. They also showed that conditions of time, temperature and different food simulants actually influenced the extraction of the surrogates. \textcopyright{} 2014 Smithers Information Ltd.}, - keywords = {Contaminants,Decontamination,Extractability test,Extrusion process,Recycling}, - file = {/Users/fabio/Zotero/storage/4TM7HML9/Comparison of Different Extrusion Processes for Cleaning the Recycled Polypropylene Removing Volatile and Non-volatile Contaminants.pdf} -} - -@article{Garcia2017, - title = {The Future of Plastics Recycling}, - author = {Garcia, Jeannette M. and Robertson, Megan L.}, - year = {2017}, - month = nov, - journal = {Science}, - volume = {358}, - number = {6365}, - pages = {870--872}, - issn = {0036-8075}, - doi = {10.1126/science.aaq0324}, - file = {/Users/fabio/Zotero/storage/JC3YWV5H/The future of plastics recycling.pdf} -} - -@article{Garcia2018, - title = {Environmental Performance of Additive Manufacturing Process \textendash{} an Overview}, - author = {Garcia, Fabricio Leon and Moris, Virg{\'i}nia Aparecida da Silva and Nunes, Andr{\'e}a Oliveira and Silva, Diogo Aparecido Lopes}, - year = {2018}, - journal = {Rapid Prototyping Journal}, - volume = {24}, - number = {7}, - pages = {1166--1177}, - issn = {13552546}, - doi = {10.1108/RPJ-05-2017-0108}, - abstract = {\textcopyright{} 2017 ACM. FANETs are a promising solution for application scenarios involving UAVs. There are many mobility models that can be used to reproduce the behavior of the mobile nodes in an ad-hoc network, but some of these cannot simulate the realistic motion of UAVs. In this paper we list the available mobility models and try to understand which ones should be adopted for different FANET application scenarios, discussing their pros and cons.}, - keywords = {3D printing,Additive manufacturing (AM),Energy consumption,Environmental performance,Life cycle assessment (LCA)}, - file = {/Users/fabio/Zotero/storage/TKNFSIHD/Environmental performance of additive manufacturing process – an overview.pdf} -} - -@article{Garcia2019, - title = {Challenges of Creating and Capturing Value in Open Eco-Innovation: {{Evidence}} from the Maritime Industry in {{Denmark}}}, - author = {Garcia, Rosanna and Wigger, Karin and Hermann, Roberto Rivas}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {642--654}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.027} -} - -@article{Garcia2021, - title = {Comparative {{LCA}} of Conventional Manufacturing vs. Additive Manufacturing: The Case of Injection Moulding for Recycled Polymers}, - author = {Garcia, Fabricio Leon and Nunes, Andr{\'e}a Oliveira and Martins, Mariane Guerra and Belli, Maria Cristina and Saavedra, Yovana M.B. and Silva, Diogo Aparecido Lopes and Moris, Virg{\'i}nia Aparecida da Silva}, - year = {2021}, - journal = {International Journal of Sustainable Engineering}, - volume = {00}, - number = {00}, - pages = {1--19}, - publisher = {{Taylor \& Francis}}, - issn = {1939-7038}, - doi = {10.1080/19397038.2021.1990435}, - keywords = {acrylonitrile butadiene,fused deposition modelling,sustainable production}, - file = {/Users/fabio/Zotero/storage/DBYKMSZM/Comparative LCA of conventional manufacturing vs additive manufacturing the case of injection moulding for recycled polymers.pdf} -} - -@article{GarciaGuzman2013, - title = {Living {{Labs}} for {{User-Driven Innovation}} : {{A Process Reference Model}}}, - author = {Garc{\'i}a Guzman, Javier and {Fern{\'a}ndez del Carpi{\'o}}, Alvaro and {Colomo-Palacios}, Ricardo and {Velasco de Diego}, Manuel}, - year = {2013}, - journal = {Research Technology Management}, - volume = {56}, - number = {3}, - pages = {29--39}, - publisher = {{Industrial Research Institute}}, - issn = {08956308}, - abstract = {Living labs are innovation infrastructures within which software companies and research organizations collaborate with lead users and early adopters in creating participative strategies to define, design, develop, and validate new products and services that maximize the socioeconomic conditions of the partnership. For this kind of innovation cluster to succeed, it must implement effective practices to manage the collaboration. However, there is currently no process reference model for efficient practices to manage a living lab. A case study involving six living labs was carried out to create and validate a process reference model for living labs.}, - keywords = {Living lab,Process reference model,Software industry,User innovation} -} - -@article{Gardan2013, - title = {{{CAO}} : Vers La Mod\'elisation Fonctionnelle}, - author = {Gardan, Yvon}, - year = {2003}, - journal = {Techniques de l'ingenieur}, - volume = {33}, - number = {0}, - file = {/Users/fabio/Zotero/storage/9NCHATBU/CAO vers la modélisation fonctionnelle.pdf} -} - -@article{Gardan2015, - title = {Additive Manufacturing Technologies: State of the Art and Trends}, - author = {Gardan, Julien}, - year = {2015}, - journal = {International Journal of Production Research}, - volume = {7543}, - number = {May}, - pages = {1--15}, - issn = {1366588X}, - doi = {10.1080/00207543.2015.1115909}, - file = {/Users/fabio/Zotero/storage/HPC5ZCY4/Gardan - 2015 - Additive manufacturing technologies state of the art and trends.pdf} -} - -@article{Gardanova2020, - title = {A {{Model}} for {{Optimizing}} the {{Structure}} of {{Teaching Techniques}} for {{Distance Learning}} in the {{Russian Higher Education System}}}, - author = {Gardanova, Zhanna and Ponkratov, Vadim and Kuznetsov, Nikolay and Nikitina, Natalya and Dudnik, Olesya and Latypova, Endzhe and Shcherbatykh, Sergey}, - year = {2020}, - month = nov, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {6}, - number = {4}, - pages = {147}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2199-8531}, - doi = {10.3390/joitmc6040147}, - urldate = {2020-11-19}, - abstract = {This study aims to develop a methodical approach to optimize the structure of teaching techniques and approaches to distance education, as exemplified by Russian universities, to enhance students' professional competencies. A pedagogical experiment was conducted with the participation of 746 second to fourth year students majoring in engineering at the Ural Federal University in Russia. The coefficients for the relative importance of professional competencies were obtained through expert assessment. The number of experts was 40 faculty members with teaching experience of more than five years. The pedagogical experiment revealed the regularities of the influence of the forms of distance learning on the formation of students' professional competency levels. The values of students' developmental competency levels have been determined. Non-linear regression models have been developed based on the values of the integral level of professional competencies and the percentage of distance-learning forms in the number of instructional hours. The proposed methodological approach will be useful for university professors and teachers in identifying the most effective forms of distance learning and in differentiating teaching methods not only in the context of the general pandemic but also in the natural conditions of the educational process.}, - keywords = {COVID-19,distance learning,higher education,pandemic,professional competencies,students}, - file = {/Users/fabio/Zotero/storage/LK8IH8E7/full-text.pdf} -} - -@article{gardunogarciaDesigningFutureExperiences2021, - title = {Designing Future Experiences of the Everyday: {{Pointers}} for Methodical Expansion of Sustainability Transitions Research}, - author = {{Gardu{\~n}oG arc{\'i}a}, Claudia and Gaziulusoy, {\.I}dil}, - year = {2021}, - month = mar, - journal = {Futures}, - volume = {127}, - pages = {102702}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102702}, - urldate = {2021-02-14}, - abstract = {It is critical now that we direct all our efforts at transitions to post-carbon and sustainable futures. Currently, transitions are mostly handled by select expert groups who generate transition visions, scenarios and pathways, feed their findings into policy-making processes, thereby locking-in ``futures'' on behalf of the wider public. Scholars from a variety of disciplinary backgrounds are searching for more effective means to engage and empower citizens to effectively comprehend and actively take part in futuring processes. Experiential futures is an emerging field that connects experience design and futures studies. Experiential scenarios aim to create real memories of virtual events so that alternative futures can be understood and deliberated better by publics. This article maps contributions belonging to different disciplinary fields (including speculative design, literature studies, and psychology) to explore the means by which the everyday in futures could be virtually or vicariously experienced, aiming to contribute into the theoretical and methodological base of experiential futures. Our findings suggest that people's ability for being immersed into a story is positively correlated with their empathic capacity. Immersion seems to be most successfully achieved when the experience shares some level of familiarity with people's everyday reality and when the narrative is logically convincing. In addition, our findings indicate that avid fiction readers are more easily immersed in alternative scenarios than those who are not. Our findings have significant implications for designing future experiences of the everyday, therefore, on theory and methods of sustainability transitions.}, - keywords = {Design for sustainability,Everyday experience,Experiential futures,Immersion,Sustainability transitions}, - file = {/Users/fabio/Zotero/storage/BGTAD8AE/full-text.pdf} -} - -@article{Garetti2012, - title = {Sustainable Manufacturing: {{Trends}} and Research Challenges}, - author = {Garetti, M. and Taisch, M.}, - year = {2012}, - journal = {Production Planning and Control}, - volume = {23}, - number = {2-3}, - pages = {83--104}, - issn = {0953-7287}, - doi = {10.1080/09537287.2011.591619}, - abstract = {Sustainability is and will be a crucial issue for the present and future generations. The current assumption that natural resources are infinite and that the regenerative capacity of the environment is able to compensate for all human action is no longer acceptable. Hence, sustainability issues will influence all organisational aspects of the human life, from the economical, political, social and environmental points of view. The reason is simple: until now, all human activities have been based on the paradigm of unlimited resources and unlimited world's capacity for regeneration; from now on, the awareness of the termination of this assumption means that all related behavioural models must be changed. This is a very impressive objective embracing all fields of culture, economy, technology and much more. A continuing effort, together with a reasonable time span, will be required to pursue this goal. Fortunately, nature and the environment are capable of self-regulation and will give man a chance to recover from the damage he is causing to the earth mother, provided that the will to do so is firmly established. Manufacturing, as the main pillar of the civilised lifestyle, will be strongly affected by the sustainability issues and it will play an important role in establishing a sustainable way ahead. Today, nearly all manufacturing models are based on the old paradigm. Technology, on which the manufacturing is largely based, is asked, together with culture and economy, to give the tools and options for building new solutions towards a sustainable manufacturing concept. Generally speaking, new technology, new business models and new lifestyle models will be the cornerstones of the new sustainable world and this will be particularly true for what concerns the manufacturing sector. Impressive constraints and requirements will affect the industrial sector on the way ahead towards sustainability. Research and development will play a crucial role to this concern, having the responsibility to offer appropriate options to the society for answering the above-mentioned needs. The main evidences on researches challenges expected for sustainable manufacturing are outlined by the authors that have been involved in the IMS international project 'IMS2020: Supporting Global Research for IMS2020 Vision', promoted by the European Commission to prepare a roadmap for future (2020) manufacturing research. \textcopyright{} 2012 Taylor \& Francis.}, - isbn = {0953-7287}, - keywords = {sustainability,sustainable manufacturing}, - file = {/Users/fabio/Zotero/storage/8MCMVNPX/Sustainable manufacturing Trends and research challenges.pdf} -} - -@article{Garmulewicz2018, - title = {Disruptive {{Technology}} as an {{Enabler}} of the {{Circular Economy}}: {{What Potential Does 3D Printing Hold}}?}, - author = {Garmulewicz, Alysia and Holweg, Matthias and Veldhuis, Hans and Yang, Aidong}, - year = {2018}, - month = may, - journal = {California Management Review}, - volume = {60}, - number = {3}, - pages = {112--132}, - issn = {0008-1256}, - doi = {10.1177/0008125617752695}, - abstract = {Three-dimensional (3D) printing has been widely identified as an emerging disruptive technology. This study examines how this technology could enable the circular economy by disrupting the existing materials value chain. Specifically, could this novel technology be used to locally manufacture new goods from local sources of recycled plastic waste, thereby offering benefits for the efficiency and effectiveness of materials cycling? This article uses the London metropolitan area\textemdash where system conditions already exist in the form of material flows, technology policy, and facilities\textemdash{} in order to assess 3D printing's viability as an enabler of a circular economy at the local level. An analysis of stakeholder perceptions identifies economic, technological, social, organizational, and regulatory barriers to mainstream implementation, and their likelihood of being overcome.}, - isbn = {0008125617752}, - keywords = {3D printing,circular economy,disruptive technology,technological innovation}, - file = {/Users/fabio/Zotero/storage/WTRG69MS/disruptive technology as an enabler of the circular economy- what potential does 3d printing hold.pdf} -} - -@phdthesis{Garnier2020, - title = {Les {{FabLabs}}, Un R\'eseau Mondial et En Croissance d'organisations Collaboratives : Une Analyse Des Modes de Coordination Intra et Inter-Organisationnels {{Constance Garnier}}}, - author = {Garnier, Constance}, - year = {2020}, - urldate = {2021-05-13}, - school = {Institute Polytechnique de Paris}, - file = {/Users/fabio/Zotero/storage/VX9LZGQI/full-text.pdf} -} - -@article{garnierMakingHackingCoding2023, - ids = {garnier2023}, - title = {Making, {{Hacking}}, {{Coding}}: {{Fablabs}} as {{Intermediary Platforms}} for {{Modes}} of {{Social Manufacturing}}:}, - shorttitle = {Making, {{Hacking}}, {{Coding}}}, - author = {Garnier, Constance and Capdevila, Ignasi}, - year = {2023}, - month = jan, - journal = {Journal of Innovation Economics \& Management}, - volume = {N\textdegree{} 40}, - number = {1}, - pages = {137--158}, - publisher = {{De Boeck Sup\'erieur}}, - address = {{Louvain-la-Neuve}}, - issn = {2032-5355}, - doi = {10.3917/jie.pr1.0128}, - urldate = {2023-01-24}, - abstract = {The article suggests that the emergence of FabLabs and other collaborative spaces of innovation imply new modes of manufacturing, based on a more social, inclusive, and open approach than current industrial mass-production models. We argue that FabLabs are platforms of social manufacturing, allowing different combinations of interactions between industries and individuals, through their activities around making (producing goods from raw materials), hacking (re-using/combining produced goods), and coding (producing and re-using digital goods). The article also defines four different modes of social manufacturing depending on the technologies used (open or proprietary) and the location of manufacturing (local or industrial). The article contributes to the literature on collaborative spaces by explaining prospective scenarios of development in relationship to new modes of production. It also complements the literature by contextualizing the physical spaces where social manufacturing takes place.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/W9963DAS/Garnier y Capdevila - 2023 - Making, Hacking, Coding Fablabs as Intermediary P.pdf;/Users/fabio/Zotero/storage/YSA5W7EX/revue-journal-of-innovation-economics-2023-1-page-137.html} -} - -@article{Garrido-Hidalgo2020, - title = {The Adoption of {{Internet}} of {{Things}} in a {{Circular Supply Chain}} Framework for the Recovery of {{WEEE}}: {{The}} Case of {{Lithium-ion}} Electric Vehicle Battery Packs}, - author = {{Garrido-Hidalgo}, Celia and Ramirez, F. Javier and Olivares, Teresa and {Roda-Sanchez}, Luis}, - year = {2020}, - month = feb, - journal = {Waste Management}, - volume = {103}, - pages = {32--44}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.09.045}, - file = {/Users/fabio/Zotero/storage/YBXMFD2X/The adoption of Internet of Things in a Circular Supply Chain framework for the recovery of WEEE- The case of Lithium-ion electric vehicle battery packs.pdf} -} - -@article{Garrido2010, - title = {Open Design and Knowledge Integration in Semiotic Manufacturing Integration}, - author = {Garrido, Paulo}, - year = {2010}, - month = aug, - journal = {International Journal of Computer Integrated Manufacturing}, - volume = {23}, - number = {8-9}, - pages = {819--831}, - issn = {0951-192X}, - doi = {10.1080/0951192X.2010.490923}, - urldate = {2014-02-20}, - keywords = {free software,human factors,knowledge integration,open design,open source,semiotic manufacturing integration,socio-technical systems,software}, - file = {/Users/fabio/Zotero/storage/93RGX5S7/Garrido - 2010 - Open design and knowledge integration in semiotic manufacturing integration.pdf} -} - -@article{Gary2020, - title = {An Introduction to the Field of Abundant Economic Thought}, - author = {Gary, Robert F. and Fink, Matthias and Belousova, Olga and Marinakis, Yorgos and Tierney, Robert and Walsh, Steven T.}, - year = {2020}, - month = mar, - journal = {Technological Forecasting and Social Change}, - volume = {155}, - pages = {119796}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119796}, - urldate = {2020-03-23}, - abstract = {The problems facing the 21st century world, and the new technologies that have emerged to meet them, are harbingers of a new industrial revolution\textendash Industry 4.0 (I4.0). The resulting information-based economy is challenging traditional economic thought, as evidenced by the appearance of ``Abundance'' as an economic philosophy. Abundant economic thought is relatively undeveloped. Here, authors help define the field of Abundance based on the possibilities of the new information-based economy and the technological harbingers of I 4.0. Ten basic tenants of Technological Innovation Management (TIM) are presented as a basis for abundant economic thought. It is further shown that the Abundance perspective can elevate the Bottom Billion and nurture a sustainable and vibrant and growing middle class. Finally, we show one industry group that is operationalizing abundant economics.}, - keywords = {Abundance,Discontinuous innovation,Disruptive technology,Project management community development,Technological entrepreneurship} -} - -@article{gattoActorsSwissPlastic2023, - title = {The Actors of the {{Swiss}} Plastic System: {{An}} Analysis of Beliefs and Interests}, - shorttitle = {The Actors of the {{Swiss}} Plastic System}, - author = {Gatto, Laura and Brunner, Dunia and Bundi, Pirmin and Nahrath, St{\'e}phane}, - year = {2023}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {390}, - pages = {136042}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2023.136042}, - urldate = {2023-02-12}, - langid = {english} -} - -@article{gauchatLegitimacyScience2023, - title = {The {{Legitimacy}} of {{Science}}}, - author = {Gauchat, Gordon W.}, - year = {2023}, - journal = {Annual Review of Sociology}, - volume = {49}, - number = {1}, - pages = {263--279}, - doi = {10.1146/annurev-soc-030320-035037}, - urldate = {2023-08-31}, - abstract = {The ongoing pandemic and quickening climate crisis make it difficult to overstate the significance of science and science policy to our world. These global catastrophes have laid bare the fragility of science's legitimacy and its dependence on broader cultural understandings and institutional norms. Challenges to science's legitimacy are numerous and daunting in the early twenty-first century but also nothing new. This review interrogates science as culture in our highly fragmented and polarized social environment, and the idea that scientific knowledge and expertise are experiencing a profound and accelerating legitimacy crisis. The challenges are internal and external to the production of scientific knowledge, emphasizing the publicly financed sector in colleges and universities worldwide. Internal threats include fraud, replicability, knowledge diffusion and equability, disciplinary fragmentation, and overproduction. Equally important are the external threats, such as polarization, authoritarianism, religious beliefs, information technology, and economic capital\textemdash commanding financial flows to organized science. While sociology is uniquely situated to study these composite issues, it faces sobering challenges and its own scientific legitimacy crisis.}, - keywords = {culture,knowledge,legitimacy,polarization,public policy,science}, - file = {/Users/fabio/Zotero/storage/KI2C6WD9/Gauchat_2023_The Legitimacy of Science.pdf} -} - -@article{gauchScientificMethodBrief, - title = {Scientific {{Method}} in {{Brief}}}, - author = {Gauch, Hugh G}, - pages = {308}, - langid = {english}, - file = {/Users/fabio/Documents/2-Afilando la Sierra/Research/Hugh G. Gauch, Jr. - Scientific Method in Brief-Cambridge University Press (2012).pdf} -} - -@article{gavrasMappingTypesModularity2021, - title = {Mapping the Types of Modularity in Open-Source Hardware}, - author = {Gavras, Kosmas and Kostakis, Vasilis}, - year = {2021/ed}, - journal = {Design Science}, - volume = {7}, - pages = {e13}, - publisher = {{Cambridge University Press}}, - issn = {2053-4701}, - doi = {10.1017/dsj.2021.11}, - urldate = {2022-09-01}, - abstract = {The importance of intangible code modularity in open-source software, as well as of tangible product modularity in proprietary hardware, is widely acknowledged. Nevertheless, modularity in open-source hardware (OSH) remains under-researched. This article first describes qualitatively different types of modularity based on two OSH case studies and then quantifies each type of modularity, following a unified network-based approach. The results are discussed and compared within each case to test the `mirroring hypothesis', and between cases to evaluate the impact of physical against intangible modularity types. The ultimate goal is to prompt a discussion into a wide but under-explored subset in OSH.}, - langid = {english}, - keywords = {design modularity,fabrication modularity,mirroring hypothesis,modularity,open-source hardware}, - file = {/Users/fabio/Zotero/storage/Q77HQF5T/Gavras y Kostakis - 2021 - Mapping the types of modularity in open-source har.pdf} -} - -@article{Gaytan2009, - title = {Advanced Metal Powder Based Manufacturing of Complex Components by Electron Beam Melting}, - author = {Gaytan, S. M. and Murr, L. E. and Medina, F. and Martinez, E. and Lopez, M. I. and Wicker, R. B.}, - year = {2009}, - journal = {Materials Technology: Advanced Performance Materials}, - volume = {24}, - number = {3}, - pages = {180--190}, - issn = {10667857}, - doi = {10.1179/106678509X12475882446133}, - abstract = {Electron beam melting of Ti-6Al-4V powder (similar to 30 mu m diameter) to create complex, three-dimensional components layer by layer using CAD is described along with the characterisation of these products (builds) by optical and electron microscopy, and mechanical testing. Build defects, including porous (unmelted or unsintered) zones, inclusions and gas bubbles trapped in the atomised powder particles and retained in the build, are illustrated. Reticulated mesh geometries and their applications are described along with examples having biomedical applications. Microstructures of solid components and mesh arrays are described. Powder chemistries and solid build chemistries are also examined and shown to be constant for up to 40 cycles of powder reuse, but there was a 10-15\% reduction in Al content in the solid builds at optimised build conditions. Quality control and related issues are also described using duplicate products for destructive testing correlated with removable quality control tabs on the builds.}, - isbn = {1066-7857}, - keywords = {additive layered manufacturing,electron beam melting,materials characterisation,reticulated mesh arrays}, - file = {/Users/fabio/Zotero/storage/S5IFX2KT/Advanced metal powder based manufacturing of complex components by electron beam melting.pdf} -} - -@article{Gaziulusoy2015, - title = {Design for System Innovations and Transitions: {{A}} Conceptual Framework Integrating Insights from Sustainablity Science and Theories of System Innovations and Transitions}, - author = {Gaziulusoy, A Idil and Brezet, Han}, - year = {2015}, - journal = {Journal of Cleaner Production}, - volume = {108}, - pages = {558--568}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2015.06.066}, - urldate = {2021-09-16}, - abstract = {It is increasingly acknowledged that, in order to achieve sustainability, there is an urgent need for radical and transformative restructuring of socio-technical systems that meet our needs. These transformations are referred to as system innovations for sustainability or transitions. Transitions and system innovations cover not only product and process innovations but also changes in user practices, markets, policy, regulations, culture, infrastructure, lifestyle and management of firms and have significant implications for design and innovation activity aiming to contribute to the societal endeavour of achieving sustainability. Even though theory on system innovations and transitions is now extensive, it provided explanations regarding how companies and design and innovation activities fit into the big and long-term picture of system innovations and transitions only to a certain extent. In addition, there have not been many efforts in the design for sustainability field to learn from the theories of transitions and system innovations. In this paper, we make an initial theoretical contribution into the design and innovation for sustainability field by integrating relevant insights from sustainability science and system innovations and transitions theories. The result of this integration is a proposal for a prescriptive conceptual framework which explains how wider-scale systemic changes can be addressed at smaller elements of socio-technical systems specifically focussing on the design and innovation level within companies.}, - keywords = {Design for sustainability,Design methodology,Product development,Service development,Sustainability science,System innovation,Transitions}, - file = {/Users/fabio/Zotero/storage/2SZRCGAG/full-text.pdf} -} - -@incollection{gaziulusoyProductServiceSystem2019, - title = {Product\textendash Service System Design for Sustainability}, - booktitle = {Design for {{Sustainability}}}, - author = {Gaziulusoy, {\.I}dil, Fabrizio Ceschin}, - year = {2019}, - publisher = {{Routledge}}, - abstract = {This chapter presents product\textendash service system design for sustainability and discusses its main sustainability benefits, limitations and unresolved issues, as well as its current and future research directions. It is widely agreed that reducing the environmental impact of products, although fundamental, is not on its own sufficient to obtain the radical improvements required to achieve sustainability. For this reason, there is a need to adopt a broader design approach, focused on producing structural changes in the ways in which production and consumption systems are organised. Within this perspective, product\textendash service system innovations represent a promising approach. These innovations entail a shift from consumption based on ownership to consumption based on access and sharing, and can potentially decouple economic value from material and energy consumption. They are also considered crucial to enable circular economy models. Designing a product\textendash service system requires shifting from product design thinking to system design thinking. Since the 2000s, several methods and tools have been developed to support the design of eco-efficient and sustainable product\textendash service systems. Despite the potential to deliver a range of sustainability benefits, the diffusion of product\textendash service systems with sustainability characteristics is still very limited, due to a range of cultural, corporate and regulatory barriers.}, - isbn = {978-0-429-45651-0} -} - -@article{Gebbe2015, - title = {Concept of the {{Green Factory Bavaria}} in {{Augsburg}}}, - author = {Gebbe, C. and Hilmer, S. and Gotz, G. and {Lutter-Gunther}, M. and Chen, Q. and Unterberger, E. and Glasschroder, J. and Schmidt, V. and Riss, F. and Kamps, T. and Tammer, C. and Seidel, C. and Braunreuther, S. and Reinhart, G.}, - year = {2015}, - journal = {Procedia CIRP}, - volume = {32}, - number = {Clf}, - pages = {53--57}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2015.02.214}, - abstract = {Scheduled nuclear power plant shutdowns in Bavaria and increased customer awareness for environmentally friendly products have raised the interest in energy security and resource efficient production. This gave birth to the idea of the Green Factory Bavaria in Augsburg. The factory will serve as a research-, demonstration- and learning platform and will assist Bavarian manufacturing companies in increasing their resource efficiency. Therefore, an additive manufacturing process chain will be realized, in which the following specific topics are going to be addressed: resource efficient product design and powder recycling for additive manufacturing technologies, format flexible packaging, biologic component cleaning, energy supply concepts and measurement systems facilitating life cycle assessments. In this paper, we want to present the initial motives, the current status and the future outlook of the Green Factory Bavaria in Augsburg.}, - isbn = {4982156883}, - keywords = {Learning,Manufacturing system,Resource efficiency}, - file = {/Users/fabio/Zotero/storage/5QAGN259/Gebbe et al. - 2015 - Concept of the Green Factory Bavaria in Augsburg.pdf} -} - -@article{Gebler2014, - title = {A Global Sustainability Perspective on {{3D}} Printing Technologies}, - author = {Gebler, Malte and Schoot Uiterkamp, Anton J.M. and Visser, Cindy}, - year = {2014}, - month = nov, - journal = {Energy Policy}, - volume = {74}, - number = {C}, - pages = {158--167}, - publisher = {{Elsevier}}, - issn = {03014215}, - doi = {10.1016/j.enpol.2014.08.033}, - abstract = {Three-dimensional printing (3DP) represents a relative novel technology in manufacturing which is associated with potentially strong stimuli for sustainable development. Until now, research has merely assessed case study-related potentials of 3DP and described specific aspects of 3DP. This study represents the first comprehensive assessment of 3DP from a global sustainability perspective. It contains a qualitative assessment of 3DP-induced sustainability implications and quantifies changes in life cycle costs, energy and CO2 emissions globally by 2025. 3DP is identified to cost-effectively lower manufacturing inputs and outputs in markets with low volume, customized and high-value production chains as aerospace and medical component manufacturing. This lowers energy use, resource demands and related CO2 emissions over the entire product life cycle, induces changes in labour structures and generates shifts towards more digital and localized supply chains. The model calculations show that 3DP contains the potential to reduce costs by 170-593 billion US \$, the total primary energy supply by 2.54-9.30 EJ and CO2 emissions by 130.5-525.5 Mt by 2025. The great range within the saving potentials can be explained with the immature state of the technology and the associated uncertainties of predicting market and technology developments. The energy and CO2 emission intensities of industrial manufacturing are reducible by maximally 5\% through 3DP by 2025, as 3DP remains a niche technology. If 3DP was applicable to larger production volumes in consumer products or automotive manufacturing, it contains the (theoretical) potential to absolutely decouple energy and CO2 emission from economic activity.}, - isbn = {03014215}, - pmid = {26402038}, - keywords = {3D printing,CO2 emissions,Costs,Industrial manufacturing,Life cycle,TPES}, - file = {/Users/fabio/Zotero/storage/7V7LLBQS/Gebler, Schoot Uiterkamp, Visser - 2014 - A global sustainability perspective on 3D printing technologies.pdf} -} - -@article{geelsCausalityExplanationSociotechnical2022, - title = {Causality and Explanation in Socio-Technical Transitions Research: {{Mobilising}} Epistemological Insights from the Wider Social Sciences}, - author = {Geels, Frank W.}, - year = {2022}, - month = jul, - journal = {Research Policy}, - volume = {51}, - number = {6}, - pages = {104537}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2022.104537}, - urldate = {2022-05-23} -} - -@article{Geissdoerfer2017, - title = {The {{Circular Economy}} \textendash{} {{A}} New Sustainability Paradigm?}, - author = {Geissdoerfer, Martin and Savaget, Paulo and Bocken, Nancy M.P. and Hultink, Erik Jan}, - year = {2017}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {143}, - pages = {757--768}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2016.12.048}, - abstract = {While the terms Circular Economy and sustainability are increasingly gaining traction with academia, industry, and policymakers, the similarities and differences between both concepts remain ambiguous. The relationship between the concepts is not made explicit in literature, which is blurring their conceptual contours and constrains the efficacy of using the approaches in research and practice. This research addresses this gap and aims to provide conceptual clarity by distinguishing the terms and synthesising the different types of relationships between them. We conducted an extensive literature review, employing bibliometric analysis and snowballing techniques to investigate the state of the art in the field and synthesise the similarities, differences and relationships between both terms. We identified eight different relationship types in the literature and illustrated the most evident similarities and differences between both concepts.}, - arxiv = {http://dx.doi.org/10.1016/j.jclepro.2016.12.048}, - isbn = {0959-6526}, - keywords = {Circular business model,Circular Economy,Closed loop,Literature review,Sustainability,Sustainable development}, - file = {/Users/fabio/Zotero/storage/UN7ET6XH/The Circular Economy A new sustainability paradigm.pdf} -} - -@article{Gemünden2007, - title = {Role Models for Radical Innovations in Times of Open Innovation}, - author = {Gem{\"u}nden, Hans Georg and Salomo, S{\"o}ren and H{\"o}lzle, Katharina}, - year = {2007}, - month = dec, - volume = {16}, - number = {4}, - pages = {408--421}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {0963-1690}, - doi = {10.1111/j.1467-8691.2007.00451.x}, - abstract = {In this paper, we study the influence of innovator roles in highly innovative ventures. In order to obtain a differentiated picture we take into account the degree of innovativeness as a moderating variable. To test our hypotheses we use a sample of 146 highly innovative new product development projects. We choose a rigorous sampling design and apply state-of-the-art measures for the degree of innovativeness. Furthermore, we apply multi-trait-multi-method methodology (MTMM) to enhance the validity of our study. The results show that innovator roles have a strong influence on innovation success but these influences are positively and negatively moderated by innovativeness. The moderating influences depend on the type of innovativeness. Remarkably, with increasing technological innovativeness innovator roles which create inter-organizational links with the outside world appear to be more important than intra-organizational linker roles, and support from high-ranked organizational members turns out to have a significant negative effect on project success with higher degrees of technological innovativeness. Possible explanations for these findings are discussed and consequences for innovation research and innovation management are shown. \textcopyright{} 2007 Blackwell Publishing Ltd.} -} - -@article{gengImplementingChinaCircular2009, - title = {Implementing {{China}}'s Circular Economy Concept at the Regional Level: {{A}} Review of Progress in {{Dalian}}, {{China}}}, - author = {Geng, Yong and Zhu, Qinghua and Doberstein, Brent and Fujita, Tsuyoshi}, - year = {2009}, - month = feb, - journal = {Waste Management}, - volume = {29}, - number = {2}, - pages = {996--1002}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2008.06.036}, - urldate = {2022-03-13}, - abstract = {The circular economy (CE) concept was introduced in China to address environmental degradation and resource scarcity associated with rapid economic development. Chosen as a demonstration city, Dalian has implemented the CE strategy as a means of conserving water, materials, energy and land. This paper outlines some of the regional CE initiatives that have been successful to date in Dalian, including those focusing on conserving energy and water resources and others focusing on reduced industrial emissions. The paper details the approach used in implementing the CE concept in Dalian, tracing the foci and goals of the program, and the sectoral approach used to implement a CE. Although Dalian municipality has achieved many successes in implementing a CE, our paper identifies several challenges that, until recently, have held back complete implementation. These include: the lack of incentives for older industries to 'green' their operations, the lack of financial support to expand the CE concept, and a broad-based need for heightened public awareness and participation in CE initiatives. Our paper then identifies several responses by Dalian municipality to overcome these challenges, including pricing and tax reforms that serve as conservation incentives, the provision of financial support for CE promotion through budget reorganization, and the organization of CE training programs. Our paper concludes that, although CE initiatives have been successful in Dalian, more is possible and more is needed before Dalian can be designated a true 'eco-city'. The approach used by Dalian can provide guidance for other Chinese cities, although it is recognized that each city must tailor its own approach for differing contexts and conditions. \textcopyright{} 2008 Elsevier Ltd. All rights reserved.}, - pmid = {18804990} -} - -@article{genoveseCircularEconomyCrossroads2021, - title = {The {{Circular Economy}} at a {{Crossroads}}: {{Technocratic Eco-Modernism}} or {{Convivial Technology}} for {{Social Revolution}}?}, - shorttitle = {The {{Circular Economy}} at a {{Crossroads}}}, - author = {Genovese, Andrea and Pansera, Mario}, - year = {2021}, - month = apr, - journal = {Capitalism Nature Socialism}, - volume = {32}, - number = {2}, - pages = {95--113}, - publisher = {{Routledge}}, - issn = {1045-5752}, - doi = {10.1080/10455752.2020.1763414}, - urldate = {2022-10-11}, - abstract = {In the last decade, the concept of ``Circular Economy'' (CE) has gained prominence in the political and corporate discourse around the world. According to its proponents, CE represents a new paradigm that will push the frontiers of environmental sustainability by transforming the relationships between ecological systems and economic activities. In this paper we discuss how this idea is problematic for a number of reasons, claiming that the biggest shortcoming of the CE discourse is represented by its apolitical and technocratic framing; in addition, we propose a countervailing discourse of CE based on the idea of convivial technology.}, - keywords = {Circular economy,convivial technology,depoliticisation,European Union,M\textendash C-M circulation}, - file = {/Users/fabio/Zotero/storage/8GRVIA7Y/Genovese y Pansera - 2021 - The Circular Economy at a Crossroads Technocratic.pdf} -} - -@article{George2017, - title = {{{3D Printed Surgical Instruments}}: {{The Design}} and {{Fabrication Process}}}, - author = {George, Mitchell and Aroom, Kevin R. and Hawes, Harvey G. and Gill, Brijesh S. and Love, Joseph}, - year = {2017}, - month = jan, - journal = {World Journal of Surgery}, - volume = {41}, - number = {1}, - pages = {314--319}, - issn = {0364-2313}, - doi = {10.1007/s00268-016-3814-5} -} - -@article{George2019, - title = {Food Quality Traceability Prototype for Restaurants Using Blockchain and Food Quality Data Index}, - author = {George, Reno Varghese and Harsh, Hari Om and Ray, Papri and Babu, Alex K.}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {240}, - pages = {118021}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118021} -} - -@article{Georges2015a, - title = {User Engagement in Living Lab Field Trials}, - author = {Georges, Annabel and Schuurman, Dimitri and Baccarne, Bastiaan and Coorevits, Lynn}, - year = {2015}, - journal = {Info}, - volume = {17}, - number = {4}, - pages = {26--39}, - issn = {1463-6697}, - doi = {10.1108/info-01-2015-0011}, - abstract = {Purpose \textendash{} The purpose of this paper is to reflect on the factors playing a role in the engagement of end-users to participate in Living Lab field trials. Design/methodology/approach \textendash{} Multiple case study analysis of three Living Lab cases in which field trials were organized. Findings \textendash{} Based on academic literature on field trials, user engagement and the technology acceptance model, the authors argue that several factors play a role in the participation of users in field trials. An influential factor that emerged is the functional maturity of the innovation, the extent to which a prototype resembles the functionalities and the processes of the final, go-to-market product at the moment of the field trial. Within this exploratory paper, we propose the ``user engagement model for field trials'' to explain the factors that play a role in the engagement of end-users in field trials. Research limitations/implications \textendash{} The methodological limitations of a case study design make it difficult to extrapolate the findings toward a larger sample. Therefore, this paper focuses on making an in-depth analysis rather than making general claims. However, the insights regarding user engagement for participation pave the way for future validation on a larger scale and suggest future research directions. Practical implications \textendash{} The findings of this paper suggest that Living Lab field trials should carefully take into account the (perceived) functional maturity of the innovation and the specific characteristics of the innovation when engaging end-users for field trials. Interaction and trust between the test-users and the other stakeholders is of great importance for the active engagement of test-users during field trials. Originality/value \textendash{} This exploratory paper adds to a general understanding of end-user involvement in innovation development processes and suggests guidelines to engage end-users to participate in field trials. In addition, it introduces the concept of functional maturity of innovations and the user-engagement model for field trials.}, - keywords = {Field trial,Living Lab,Open innovation,User engagement,User involvement,User motivation} -} - -@article{Georgiadis2008, - title = {Sustainability in Electrical and Electronic Equipment Closed-Loop Supply Chains: {{A System Dynamics}} Approach}, - author = {Georgiadis, Patroklos and Besiou, Maria}, - year = {2008}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {16}, - number = {15}, - pages = {1665--1678}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2008.04.019} -} - -@article{Georgiadis2010, - title = {Environmental and Economical Sustainability of {{WEEE}} Closed-Loop Supply Chains with Recycling: A System Dynamics Analysis}, - author = {Georgiadis, Patroklos and Besiou, Maria}, - year = {2010}, - month = mar, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {47}, - number = {5-8}, - pages = {475--493}, - issn = {0268-3768}, - doi = {10.1007/s00170-009-2362-7} -} - -@article{georgievQuantitativeDynamicsDesign2023, - title = {Quantitative Dynamics of Design Thinking and Creativity Perspectives in Company Context}, - author = {Georgiev, Georgi V. and Georgiev, Danko D.}, - year = {2023}, - month = aug, - journal = {Technology in Society}, - volume = {74}, - pages = {102292}, - issn = {0160-791X}, - doi = {10.1016/j.techsoc.2023.102292}, - urldate = {2023-07-03}, - abstract = {This study is intended to provide in-depth insights into how design thinking and creativity issues are understood and possibly evolve in the course of design discussions in a company context. For that purpose, we use the seminar transcripts of the Design Thinking Research Symposium 12 (DTRS12) dataset ``Tech-centred Design Thinking: Perspectives from a Rising Asia,'' which are primarily concerned with how Korean companies implement design thinking and what role designers currently play. We employed a novel method of information processing based on constructed dynamic semantic networks to investigate the seminar discussions according to company representatives and company size. We compared the quantitative dynamics in two seminars: the first involved managerial representatives of four companies, and the second involved specialized designers and management of a design center of single company. On the basis of dynamic semantic networks, we quantified the changes in four semantic measures\textemdash abstraction, polysemy, information content, and pairwise word similarity\textemdash in chronologically reconstructed individual design-thinking processes. Statistical analyses show that design thinking in the seminar with four companies, exhibits significant differences in the dynamics of abstraction, polysemy, and information content, compared to the seminar with the design center of single company. Both the decrease in polysemy and abstraction and the increase in information content in the individual design-thinking processes in the seminar with four companies indicate that design managers are focused on more concrete design issues, with more information and less ambiguous content to the final design product. By contrast, specialized designers manifest more abstract thinking and appear to exhibit a slightly higher level of divergence in their design processes. The results suggest that design thinking and creativity issues are articulated differently depending on designer roles and the company size.}, - langid = {english}, - keywords = {Creativity,Design process,Design thinking,Information content,Semantic measures,Semantic networks}, - file = {/Users/fabio/Zotero/storage/XKDJ4FFB/Georgiev y Georgiev - 2023 - Quantitative dynamics of design thinking and creat.pdf;/Users/fabio/Zotero/storage/SXZIME8U/S0160791X23000970.html} -} - -@article{gerassimidouUnpackingComplexityUK2021, - title = {Unpacking the Complexity of the {{UK}} Plastic Packaging Value Chain: {{A}} Stakeholder Perspective}, - author = {Gerassimidou, Spyridioula and Lovat, Elena and Ebner, Norman and You, Weimu and Martin, Theodoros Giakoumise Olwenn V and Iacovidou, Eleni}, - year = {2021}, - month = nov, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2021.11.005}, - urldate = {2021-12-01} -} - -@article{gerhardsOnePlanetLiving2021, - title = {One {{Planet Living}} and the Legitimacy of Sustainability Governance: {{From}} Standardised Information to Regenerative Systems}, - author = {Gerhards, Jan and Greenwood, Dan}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {313}, - pages = {127895}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127895}, - urldate = {2021-06-21} -} - -@article{Gerke2017, - title = {The Role of Interorganizational Citizenship Behaviors in the Innovation Process}, - author = {Gerke, Anna and Dickson, Geoff and Desbordes, Michel and Gates, Stephen}, - year = {2017}, - journal = {Journal of Business Research}, - volume = {73}, - pages = {55--64}, - publisher = {{Elsevier Inc.}}, - issn = {01482963}, - doi = {10.1016/j.jbusres.2016.12.005}, - abstract = {This paper investigates the role of citizenship in the innovation process. While there is a large amount of research on organizational citizenship behavior (OCB), interorganizational citizenship behavior (ICB) has received less attention. This study examines a dense, localized cluster of private, public, and non-profit organizations. Seven dimensions characterize ICB during the different phases of the innovation process. These ICBs reflect 16 interorganizational practices that generate absorptive capacity. Seven of these practices occur during the ideation phase, five during the invention phase, and four during the exploitation phase. Cooperation and collaboration precede or underlie ICB. This study shows that spatial proximity is insufficient for enhancing innovation activities in industrial agglomerations and that ICB, collaboration, and cooperation are necessary. Therefore, these findings contribute to knowledge on the theory of innovation management and economic geography.}, - keywords = {Cluster,Collaboration,Cooperation,Innovation process,Interorganizational citizenship behavior,Sport} -} - -@book{Gershenfeld2005, - title = {Fab : The Coming Revolution on Your Desktop--from Personal Computers to Personal Fabrication}, - author = {Gershenfeld, Neil A.}, - year = {2005}, - publisher = {{Basic Books}}, - urldate = {2018-04-04}, - abstract = {Includes index. What if you could someday put the manufacturing power of an automobile plant on your desktop? It may sound far-fetched-but then, thirty years ago, the notion of "personal computers" in every home sounded like science fiction. According to Neil Gershenfeld, the renowned MIT scientist and inventor, the next big thing is personal fabrication the ability to design and produce your own products, in your own home, with a machine that combines consumer electronics with industrial tools. Personal fabricators (PF's) are about to revolutionize the world just as personal computers did a generation ago. Personal fabricators (PF's) are about to revolutionize the world just as personal computers did a generation ago. PF's will bring the programmability of the digital world to the rest of the world, by being able to make almost anything-including new personal fabricators. In FAB, Gershenfeld describes how personal fabrication is possible today, and how it is meeting local needs with locally developed solutions. He and his colleagues have created "fab labs" around the world, which, in his words, can be interpreted to mean "a lab for fabrication, or simply a fabulous laboratory." Using the machines in one of these labs, children in inner-city Boston have made saleable jewelry from scrap material. Villagers in India used their lab to develop devices for monitoring food safety and agricultural engine efficiency. Herders in the Lyngen Alps of northern Norway are developing wireless networks and animal tags so that their data can be as nomadic as their animals. And students at MIT have made everything from a defensive dress that protects its wearer's personal space to an alarm clock that must be wrestled into silence. These experiments are the vanguard of a new science and a new era-an era of "post-digital literacy" in. How to make -- Almost anything -- The past -- Hard ware -- The present -- Birds and bikes -- Subtraction -- Growing inventors -- Addition -- Building models -- Description -- Playing at work -- Computation -- Making sense -- Instrumentation -- Network -- Communication -- Art and artillery -- Interaction -- The future -- Joy -- The details.}, - isbn = {0-465-02745-8} -} - -@article{Gershenfeld2012, - title = {How to {{Make Almost Anything}}: {{The Digital Fabrication Revolution}}}, - author = {Gershenfeld, Neil}, - year = {2012}, - journal = {Foreign Affairs}, - volume = {91}, - number = {6}, - pages = {43--57}, - issn = {00157120}, - urldate = {2022-04-19}, - abstract = {A new digital revolution is coming, this time in fabrication. It draws on the same insights that led to the earlier digitizations of communication and computation, but now what is being programmed is the physical world rather than the virtual one. Digital fabrication will allow individuals to design and produce tangible objects on demand, wherever and whenever they need them. Widespread access to these technologies will challenge traditional models of business, aid, and education. The revolution is not additive versus subtractive manufacturing; it is the ability to turn data into things and things into data. A final concern about digital fabrication relates to the theft of intellectual property. Patent protections on digital fabrication designs can work only if there is some barrier to entry to using the intellectual property and if infringement can be identified. Many years of research remain to complete this vision, but the revolution is already well under way.}, - isbn = {00157120}, - pmid = {1223498609}, - keywords = {5240:Software \& systems,8600:Manufacturing industries not elsewhere classi,9190:United States,Intellectual property,Manufacturing,Numerical controls,Political Science--International Relations,United States--US}, - file = {/Users/fabio/Zotero/storage/REZAFF6X/full-text.pdf} -} - -@article{Getor2020, - title = {The Role of Technological Innovation in Plastic Production within a Circular Economy Framework}, - author = {Getor, Roland Yawo and Mishra, Nishikant and Ramudhin, Amar}, - year = {2020}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {163}, - pages = {105094}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105094}, - urldate = {2020-08-17}, - abstract = {The growing plastic waste problem has been highlighted by nature programmes like the British Broadcasting Corporation (BBC) War on Plastic series with the World Economic Forum (WEF) 2016 report estimating that by 2050, there could be more plastic than fish in the world's oceans. This has prompted the call for a shift from the linear model of tackling the plastic waste issue to that of a Circular Economy model with increasing demand for recycled resin to be incorporated into the plastic production process alongside virgin resin. However, recycled content are often associated with problems like lack of stability between various combinations of virgin/recycle polymers, which may lead to variations in temperature and inconsistency in the ease of flow attributable to the different temperature and pressure regimes under which virgin raw material and recycled feedstock melt and cool. In this paper, our main contribution is a proposed framework for integrating an enhanced AI/DB interface for analysing historical and real time information/data into a joint DSC-TGA system that allows for simultaneous quality control checks and thermal stability tests on different virgin-recycled resin mixing ratios. The database comes equipped with proven estimation methods, testing and statistical analysis results of different resin specimens to serve as a reference point for production engineers in arriving at desired check and test conditions. The information will be particularly useful to plastic product manufacturers when making decisions regarding the right virgin-recycled mix ratio conditions when using different batches of recycled resin or when they switch a supplier.}, - keywords = {OSMFI}, - file = {/Users/fabio/Zotero/storage/LMICZE6E/The role of technological innovation in plastic production within a circular economy framework.pdf} -} - -@article{Geyer2017, - title = {Production, Use, and Fate of All Plastics Ever Made.}, - author = {Geyer, Roland and Jambeck, Jenna R. and Law, Kara Lavender}, - year = {2017}, - journal = {Science Advances}, - volume = {3}, - number = {7}, - eprint = {28776036\%0Ahttp://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=PMC5517107}, - eprinttype = {pubmed}, - pages = {e1700782}, - issn = {23752548}, - doi = {10.1126/sciadv.1700782}, - abstract = {Plastics have outgrown most man-made materials and have long been under environmental scrutiny. However, robust global information, particularly about their end-of-life fate, is lacking. By identifying and synthesizing dispersed data on production, use, and end-of-life management of polymer resins, synthetic fibers, and additives, we present the first global analysis of all mass-produced plastics ever manufactured. We estimate that 8300 million metric tons (Mt) as of virgin plastics have been produced to date. As of 2015, approximately 6300 Mt of plastic waste had been generated, around 9\% of which had been recycled, 12\% was incinerated, and 79\% was accumulated in landfills or the natural environment. If current production and waste management trends continue, roughly 12,000 Mt of plastic waste will be in landfills or in the natural environment by 2050.}, - pmid = {28776036}, - file = {/Users/fabio/Zotero/storage/5IQL6B4A/Production, use, and fate of all plastics ever made.pdf;/Users/fabio/Zotero/storage/UXJFTMTA/Production, use, and fate of all plastics ever made(2).pdf} -} - -@misc{GF, - title = {Green {{Fablab}}}, - author = {{LF2L}}, - year = {2020}, - howpublished = {http://lf2l.fr/projects/green-fablab/} -} - -@article{Ghalehkhondabi2020, - title = {Sustainable {{E-waste}} Supply Chain Management with Price/Sustainability-Sensitive Demand and Government Intervention}, - author = {Ghalehkhondabi, Iman and Ardjmand, Ehsan}, - year = {2020}, - month = mar, - journal = {Journal of Material Cycles and Waste Management}, - volume = {22}, - number = {2}, - pages = {556--577}, - issn = {1438-4957}, - doi = {10.1007/s10163-019-00952-z} -} - -@article{Ghandriz2020, - title = {Extended Finite Element Method ({{XFEM}}) Modeling of Fracture in Additively Manufactured Polymers}, - author = {Ghandriz, R. and Hart, K. and Li, J.}, - year = {2020}, - month = jan, - journal = {Additive Manufacturing}, - volume = {31}, - pages = {100945}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100945} -} - -@article{ghasemzadehCollaboratingUsersInnovate2022, - title = {Collaborating with Users to Innovate: {{A}} Systematic Literature Review}, - author = {Ghasemzadeh, Khatereh and Bortoluzzi, Guido and Yordanova, Zornitsa}, - year = {2022}, - month = aug, - journal = {Technovation}, - volume = {116}, - pages = {102487}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2022.102487}, - urldate = {2022-03-13} -} - -@article{Ghazinoory2020, - title = {Why Do We Need `{{Problem-oriented Innovation System}} ({{PIS}})' for Solving Macro-Level Societal Problems?}, - author = {Ghazinoory, Sepehr and Nasri, Shohreh and Ameri, Fatemeh and Montazer, Gholam Ali and Shayan, Ali}, - year = {2020}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {150}, - pages = {119749}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119749} -} - -@article{Gherardini2017, - title = {A Systematic User-Centred Framework for Engineering Product Design in Small- and Medium-Sized Enterprises ({{SMEs}})}, - author = {Gherardini, Francesco and Renzi, Cristina and Leali, Francesco}, - year = {2017}, - month = jul, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {91}, - number = {5-8}, - pages = {1723--1746}, - issn = {0268-3768}, - doi = {10.1007/s00170-016-9857-9} -} - -@article{Ghisellini2016, - ids = {Ghisellini2016a,Ghisellini2016b,ghisellini2016}, - title = {A Review on Circular Economy: The Expected Transition to a Balanced Interplay of Environmental and Economic Systems}, - author = {Ghisellini, Patrizia and Cialani, Catia and Ulgiati, Sergio}, - year = {2016}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {114}, - eprint = {1011.1669v3}, - pages = {11--32}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2015.09.007}, - abstract = {In the last few years Circular Economy (CE) is receiving increasing attention worldwide as a way to overcome the current production and consumption model based on continuous growth and increasing resource throughput. By promoting the adoption of closing-the-loop production patterns within an economic system CE aims to increase the efficiency of resource use, with special focus on urban and industrial waste, to achieve a better balance and harmony between economy, environment and society. This study provides an extensive review of the literature of last two decades, with the purpose of grasping the main CE features and perspectives: origins, basic principles, advantages and disadvantages, modelling and implementation of CE at the different levels (micro, meso and macro) worldwide. Results evidence that CE origins are mainly rooted in ecological and environmental economics and industrial ecology. In China CE is promoted as a top-down national political objective while in other areas and countries as European Union, Japan and USA it is a tool to design bottom-up environmental and waste management policies. The ultimate goal of promoting CE is the decoupling of environmental pressure from economic growth. The implementation of CE worldwide still seems in the early stages, mainly focused on recycle rather than reuse. Important results have been achieved in some activity sectors (e.g. in waste management, where large waste recycling rates are achieved in selected developed countries). CE implies the adoption of cleaner production patterns at company level, an increase of producers and consumers responsibility and awareness, the use of renewable technologies and materials (wherever possible) as well as the adoption of suitable, clear and stable policies and tools. The lesson learned from successful experiences is that the transition towards CE comes from the involvement of all actors of the society and their capacity to link and create suitable collaboration and exchange patterns. Success stories also point out the need for an economic return on investment, in order to provide suitable motivation to companies and investors. In summary, the CE transition has just started. Moreover, the interdisciplinary framework underpinning CE offers good prospects for gradual improvement of the present production and consumption models, no longer adequate because of their environmental load and social inequity, a clear indicator of resource use inefficiency.}, - archiveprefix = {arxiv}, - isbn = {0959-6526}, - pmid = {24910141}, - keywords = {Circular economy,Recycling,Resource efficiency,Reuse,Sustainability,Zero waste}, - file = {/Users/fabio/Zotero/storage/5CZ8BWUI/A review on circular economy- the expected transition to a balanced interplay of environmental and economic systems.pdf} -} - -@article{Ghisolfi2017, - title = {System Dynamics Applied to Closed Loop Supply Chains of Desktops and Laptops in {{Brazil}}: {{A}} Perspective for Social Inclusion of Waste Pickers}, - author = {Ghisolfi, Ver{\^o}nica and Diniz Chaves, Gisele de Lorena and Ribeiro Siman, Renato and Xavier, L{\'u}cia Helena}, - year = {2017}, - month = feb, - journal = {Waste Management}, - volume = {60}, - pages = {14--31}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2016.12.018} -} - -@article{Ghobadian2018, - title = {Examining Legitimatisation of Additive Manufacturing in the Interplay between Innovation, Lean Manufacturing and Sustainability}, - author = {Ghobadian, Abby and Talavera, Irene and Bhattacharya, Arijit and Kumar, Vikas and {Garza-Reyes}, Jose Arturo and O'Regan, Nicholas}, - year = {2018}, - journal = {International Journal of Production Economics}, - number = {July 2017}, - pages = {1--12}, - publisher = {{Elsevier B.V.}}, - issn = {09255273}, - doi = {10.1016/j.ijpe.2018.06.001}, - abstract = {In response to hypercompetition, globalisation and increasing consumer expectations, many manufacturing firms have embraced lean manufacturing (LM). The primary goal of LM is to reduce/eliminate waste (muda). There is broad consensus as to what constitutes waste, but not on LM implementation. Implementation is not prescriptive with each firm relying on a different combination of administrative, process and routine change / innovation. Lean manufacturing brings about incremental change relying on administrative, process and routine levers. It best fits mass production where process variability is low and demand is high and stable. Lean manufacturing can significantly reduce waste but not eliminate waste, and the attained benefits have not always lived up to expectations. Additive manufacturing (AM) promises to revolutionise manufacturing beyond recognition by eliminating or drastically removing the waste thereby achieving sustainability. But AM is at its formative stage \textendash{} the space between the concept and growth - where many promising breakthrough technologies fail. To reach its full potential, it needs to achieve high-scale adoption. In this paper, we examine how AM can significantly reduce/eliminate waste and how it can deliver triple bottom line on an unprecedented scale. We contend that AM, if adopted deeply and widely, will take LM to its final frontier, but there are a number of impediments to this end. We identify legitimation as critical to its wide diffusion and develop a number of propositions expediting AM's legitimation. Legitimation of AM will ensure its deep and broad diffusion and should this happen, waste will be a thing of the past an important stride towards sustainable future.}, - keywords = {3D printing,Additive manufacturing,Innovation,Lean manufacturing,Legitimation,Sustainability}, - file = {/Users/fabio/Zotero/storage/78GILYJB/Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability.pdf} -} - -@article{ghobakhlooIdentifyingIndustryContributions2022, - title = {Identifying Industry 5.0 Contributions to Sustainable Development: {{A}} Strategy Roadmap for Delivering Sustainability Values}, - shorttitle = {Identifying Industry 5.0 Contributions to Sustainable Development}, - author = {Ghobakhloo, Morteza and Iranmanesh, Mohammad and Mubarak, Muhammad Faraz and Mubarik, Mobashar and Rejeb, Abderahman and Nilashi, Mehrbakhsh}, - year = {2022}, - month = aug, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2022.08.003}, - urldate = {2022-08-11}, - abstract = {Scholars believe that the newly introduced Industry 5.0 has the potential to move beyond the profit-centered productivity of Industry 4.0 and to promote sustainable development goals such as human-centricity, socio-environmental sustainability, and resilience. However, little has been done to understand how this ill-defined phenomenon may deliver its indented sustainability values despite these speculative promises. To address this knowledge gap, the present study developed a strategy roadmap that explains the mechanism by which Industry 5.0 delivers its intended sustainable development functions. The study first developed and introduced the Industry 5.0 reference model that describes the technical and functional properties of this phenomenon. The study further conducted a content-centric synthesis of the literature and identified the sustainable development functions of Industry 5.0. Next, the interpretive structural modeling (ISM) technique was employed to identify the sequential relationships among the functions and construct the Industry 5.0-enabled model of sustainable development. The ISM involved collecting the opinions of 11 Industry 5.0 experts through expert panel meetings. Results revealed that Industry 5.0 delivers sustainable development values through 16 functions. Circular intelligent products, employee technical assistance, intelligent automation, open sustainable innovation, renewable integration, and supply chain adaptability are examples of the functions identified. These functions are highly interrelated and should be developed in a specific order so that the synergies and complementarities among them would maximize the sustainable development value gains. The roadmap to Industry 5.0-driven sustainability developed in this study is expected to provide a better understanding of ways Industry 5.0 can contribute to sustainable development, explaining how the development of its functions should be managed to maximize their synergies and contribution to the intended sustainability values. The study also highlights important avenues for future research, emphasizing the potential enablers of Industry 5.0 development, such as Government 5.0 or Corporate Governance 5.0.}, - langid = {english}, - keywords = {Digitalization,Environmental sustainability,Human-centricity,Industry 4.0,Industry 5.0,Resilience,Social sustainability,Sustainable development}, - file = {/Users/fabio/Zotero/storage/Z488QIB4/S2352550922002093.html} -} - -@article{Gholamzadehmir2019, - title = {Moral Licensing, Moral Cleansing and pro-Environmental Behaviour: {{The}} Moderating Role of pro-Environmental Attitudes}, - author = {Gholamzadehmir, Maedeh and Sparks, Paul and Farsides, Tom}, - year = {2019}, - month = oct, - journal = {Journal of Environmental Psychology}, - volume = {65}, - pages = {101334}, - publisher = {{Academic Press}}, - issn = {15229610}, - doi = {10.1016/j.jenvp.2019.101334}, - urldate = {2020-05-21}, - abstract = {The present study examined the conditions under which highlighting past pro-environmental behaviour produces a ``license'' to engage in less pro-environmental behaviour: a phenomenon known as moral licensing. It also examined whether highlighting a lack of past pro-environmental action would lead to moral cleansing, where people engage in moral behaviour to maintain a positive moral self-image. It extends the existing literature on moral licensing and moral cleansing by exploring environmental attitudes as a moderator of the effect of people's past pro-environmental behaviour on their subsequent actions. Participants (N = 213) completed the Environmental Attitude Scale and were then exposed to either a stronger green credentials manipulation, or a weaker green credentials manipulation, or they took part in a control group. As a key dependent variable, they were then provided with an opportunity to find out about their personal carbon footprint, with their responses being interpreted as possible evidence of moral licensing/cleansing. There was evidence that participants with more pro-environmental attitudes who were reminded of frequent previous pro-environmental behaviour were less likely to seek information about their carbon footprint (consistent with a moral licensing effect) and that participants with less positive environmental attitudes who were reminded of infrequent previous pro-environmental behaviour were more likely to seek such information (consistent with to moral cleansing). The findings are discussed in relation to spillover effects.}, - keywords = {Environmental attitude,Moral cleansing,Moral licensing,Positive spillover,Theory of planned behaviour} -} - -@article{Ghosh2013, - title = {Social Innovation Labs: {{A}} Tool for Social Integration}, - author = {Ghosh, Pradeep}, - year = {2013}, - month = jan, - number = {6}, - pages = {44--49}, - abstract = {The Organisation for Awareness of Integrated Social Security (OAS iS) has designed a different approach to innovation in India by creating social innovation labs to work across the social sector. Pradeep Ghosh describes the approach and the work of OAS iS, and shows how social innovation labs can play an increasingly important role in creating solutions for the Indian society.} -} - -@incollection{Ghosh2017, - title = {Thinking in {{Systems}}}, - booktitle = {Dynamic {{Systems}} for {{Everyone}}}, - author = {Ghosh, Asish and Ghosh, Asish}, - year = {2017}, - pages = {1--18}, - doi = {10.1007/978-3-319-43943-3_1}, - urldate = {2020-12-01}, - file = {/Users/fabio/Zotero/storage/5S7IPRGL/full-text.pdf} -} - -@article{ghoshCircularEconomyLife2022, - title = {The {{Circular Economy Life Cycle Assessment}} and {{Visualization Framework}}: {{A Multistate Case Study}} of {{Wind Blade Circularity}} in {{United States}}}, - shorttitle = {The {{Circular Economy Life Cycle Assessment}} and {{Visualization Framework}}}, - author = {Ghosh, Tapajyoti and Hanes, Rebecca and Key, Alicia and Walzberg, Julien and Eberle, Annika}, - year = {2022}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {185}, - pages = {106531}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106531}, - urldate = {2022-08-11}, - abstract = {A circular economy (CE) aims to decouple human activities from economic activities and resource use, and its overall goal is reducing or avoiding negative environmental externalities. The newly developed Circular Economy Lifecycle Assessment and Visualization (CELAVI) framework simulates changes in supply chain environmental impacts as it transitions toward circularity. This study expands CELAVI by incorporating detailed spatial resolution and real-world road routes connecting all facilities within the system. The case study on end-of-life decision making of wind turbine blades in the states of Iowa and Missouri explores how supply chain circularity and environmental impacts are affected by pathway costs and level of wind turbine installations. It demonstrates how high circularity costs might be beneficial for circularity transitions given revenue generated from circular pathways. Finally, impacts have important contributions to the supply chain design and thus show the importance of including detailed spatial resolution in CELAVI and CE studies in general.}, - langid = {english}, - keywords = {Circular economy,life cycle assessment,material flow modeling,wind turbine blade recycling}, - file = {/Users/fabio/Zotero/storage/2AXU3SVI/Ghosh et al_2022_The Circular Economy Life Cycle Assessment and Visualization Framework.pdf;/Users/fabio/Zotero/storage/9ZW5YEV7/S0921344922003676.html} -} - -@article{ghoshDesigningHybridLife2020, - title = {Designing Hybrid Life Cycle Assessment Models Based on Uncertainty and Complexity}, - author = {Ghosh, Tapajyoti and Bakshi, Bhavik R.}, - year = {2020}, - month = oct, - journal = {The International Journal of Life Cycle Assessment 2020 25:11}, - volume = {25}, - number = {11}, - pages = {2290--2308}, - publisher = {{Springer}}, - issn = {1614-7502}, - doi = {10.1007/S11367-020-01826-5}, - urldate = {2021-09-20}, - abstract = {Despite the wide use of LCA for environmental profiling, the approach for determining the system boundary within LCA models continues to be subjective and lacking in mathematical rigor. As a result, life cycle models are often developed in an ad hoc manner, and are difficult to compare. Significant environmental impacts may be inadvertently left out. Overcoming this shortcoming can help elicit greater confidence in life cycle models and their use for decision making. This paper describes a framework for hybrid life cycle model generation by selecting activities based on their importance, parametric uncertainty, and contribution to network complexity. The importance of activities is determined by structural path analysis\textemdash which then guides the construction of life cycle models based on uncertainty and complexity indicators. Information about uncertainty is from the available life cycle inventory; complexity is quantified by cost or granularity. The life cycle model is developed in a hierarchical manner by adding the most important activities until error requirements are satisfied or network complexity exceeds user-specified constraints. The framework is applied to an illustrative example for building a hybrid LCA model. Since this is a constructed example, the results can be compared with the actual impact, to validate the approach. This application demonstrates how the algorithm sequentially develops a life cycle model of acceptable uncertainty and network complexity. Challenges in applying this framework to practical problems are discussed. The presented algorithm designs system boundaries between scales of hybrid LCA models, includes or omits activities from the system based on path analysis of environmental impact contribution at upstream network nodes, and provides model quality indicators that permit comparison between different LCA models.}, - keywords = {Environment,Environmental Chemistry,Environmental Economics,Environmental Engineering/Biotechnology,general}, - file = {/Users/fabio/Zotero/storage/GHV75MVI/full-text.pdf} -} - -@article{ghoshIncludingEcosystemServices2018, - title = {Including {{Ecosystem Services}} in {{Sustainable Process Design}} across {{Multiple Spatial Scales}}}, - author = {Ghosh, Tapajyoti and Liu, Xinyu and Bakshi, Bhavik R.}, - year = {2018}, - month = jan, - journal = {Computer Aided Chemical Engineering}, - volume = {44}, - pages = {1837--1842}, - publisher = {{Elsevier}}, - issn = {1570-7946}, - doi = {10.1016/B978-0-444-64241-7.50301-3}, - urldate = {2021-09-20}, - abstract = {This work aims to combine process design, supply chain design (SPD), technology choices, hybrid life cycle assessment (LCA) as well as incorporation of ecosystem services in a comprehensive optimization model. While most work on sustainable supply chains couples process life cycle assessment as an addendum to the optimization model, the Process to Planet \textendash{} Techno Ecological Synergy (P2P-TES) framework seamlessly integrates the engineering process as well as the supply chain design module into the hybrid LCA matrix structure. Inclusion of process design results in simultaneous optimization of both the production process as well as the supply chain network. Choice of technology options in the life cycle model provide the freedom to supplier to choose between pathway alternatives for promoting sustainability in the supply chain. Additionally, this framework includes the role of ecosystem services at the local process level as well as in all the other scales of the hybrid life cycle model. Inclusion of ecosystem services in the optimization framework results in opportunities where technological systems can harness ecological systems to offset the environmental impacts and verifies if the manufacturing process as well as its entire supply chain network is within the ecological carrying capacity of nature and satisfies a necessary condition for sustainability.}, - keywords = {ecosystem services,optimization,process,Supply Chain design,sustainability} -} - -@article{ghoshPerformanceModifyingTechniques2021, - ids = {ghosh2021a}, - title = {Performance Modifying Techniques for Recycled Thermoplastics}, - author = {Ghosh, Arun}, - year = {2021}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {175}, - pages = {105887}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105887}, - urldate = {2021-09-15}, - keywords = {Blend,Compatibilizer,Impact modifier,Mechanical performance,Morphology,Recycling,Thermoplastic}, - file = {/Users/fabio/Zotero/storage/AZ9IBWEA/Ghosh_2021_Performance modifying techniques for recycled thermoplastics.pdf;/Users/fabio/Zotero/storage/TRPEB65T/S0921344921004961.html} -} - -@article{ghoshProcessPlanetApproach2018, - title = {Process to {{Planet Approach}} to {{Sustainable Process Design}}: {{Multiple Objectives}} and {{Byproducts}}}, - author = {Ghosh, Tapajyoti and Bakshi, Bhavik R.}, - year = {2018}, - month = mar, - journal = {Theoretical Foundations of Chemical Engineering 2017 51:6}, - volume = {51}, - number = {6}, - pages = {936--948}, - publisher = {{Springer}}, - issn = {1608-3431}, - doi = {10.1134/S0040579517060045}, - urldate = {2021-09-20}, - abstract = {While standard life cycle assessment methods exclude fundamental process engineering models in its analysis, sustainable process design (SPD) is plagued by the dilemma of boundary selection that results in consideration of incomplete life cycles and shifting of emissions outside the system boundary. The Process to Planet (P2P) framework bridges this gap by combining sustainable process design with environmentally extended input output analysis. This framework extending across multiple scales provides the capability of working with process variables and designing processes at the equipment scale while considering the entire life cycle through the supply chain and economic scale models. This work expands the P2P framework to account for byproducts originating from any unit within the model. The framework is further modified to incorporate an economic objective function, henceforth developing a multiobjective (MO) optimization problem for optimal design of any generic industrial process. The modified P2P framework is demonstrated by application to a corn ethanol manufacturing process case study. The MO problem is solved using the epsilon constraint method to obtain Pareto optimal frontiers that reveal the trade-off between environmental and economic dimensions of the sustainable process design problem. Comparison between commonly practiced conventional SPD and P2P SPD Pareto curves exposes the chance of choosing non optimal solutions if the former method is employed.}, - keywords = {Industrial Chemistry/Chemical Engineering}, - file = {/Users/fabio/Zotero/storage/JE7QG4RI/full-text.pdf} -} - -@article{ghoshStrategicDecisionsCompetition2020, - title = {Strategic Decisions, Competition and Cost-Sharing Contract under Industry 4.0 and Environmental Considerations}, - author = {Ghosh, Debabrata and Sant, Tatavarty Guru and Kuiti, Mithu Rani and Swami, Sanjeev and Shankar, Ravi}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105057}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105057}, - urldate = {2020-08-09}, - abstract = {Technology advancements in the era of Industry 4.0 are proposed to shift away from a centralized instance of decision making to a more decentralized one. Critical to the growth of Industry 4.0 is the coordination among supply chain entities, in particular when Industry 4.0 is proposed to improve sustainability efforts. Studies in green supply chain literature have often considered the market expansion effects of greening efforts. However, a number of other factors influence greening efforts, a critical one being the price premium effect driven by the brand building strategy of firms. A principal issue then arises as to which strategy should firms adopt and when does each greening effect benefit firms and supply chains more. We generate several insights into this important issue by developing models considering dyadic settings, competition, and cost-sharing contract. We examine strategic decisions in these channel structures and compare and contrast our results with the market expansion based models. We identify a number of counter-intuitive results, for example, a dyadic channel with high price-sensitive consumers would benefit more from the price premium effect and cost-sharing (when it focusses on building brand) than market expansion. We also conduct intra-channel and inter-channel comparison of outcomes to understand the effect of competition. Among other results, we find that in the presence of a dominant retailer and competing manufacturers, the retailer shares more greening cost with the manufacturer than the corresponding decentralized channel.}, - keywords = {Competition,Cost-Sharing,Green supply chain management,Industry 4.0,Price premium,Technology} -} - -@misc{Giacalone2014, - title = {{{EMAKER Huxley}} - {{RepRapWiki}}}, - author = {Giacalone, Jean-Marc}, - year = {2014}, - urldate = {2014-02-21}, - howpublished = {http://reprap.org/wiki/EMAKER\_Huxley} -} - -@article{Giampietro2020, - title = {From Elite Folk Science to the Policy Legend of the Circular Economy}, - author = {Giampietro, Mario and Funtowicz, Silvio O.}, - year = {2020}, - month = jul, - journal = {Environmental Science and Policy}, - volume = {109}, - pages = {64--72}, - publisher = {{Elsevier Ltd}}, - issn = {18736416}, - doi = {10.1016/j.envsci.2020.04.012}, - urldate = {2020-09-18}, - abstract = {This paper explores the implications of the widespread success of the term circular economy in the institutional and public debate. The concept of circular economy in itself implies a logical contradiction: on the one hand, the concept acknowledges the dependence of the economy on biophysical flows; on the other hand, the proposed solution\textemdash a business model guaranteeing a full decoupling of the economy from natural resources\textemdash seemingly ignores that biophysical processes are subject to thermodynamic constraints. A biophysical view of the sustainability predicament\textemdash the flows exchanged between the technosphere and the biosphere \textemdash{} is depicted to show that the idea of a full decoupling is simply due to ignorance of the knowledge generated in (inter)disciplinary scientific fields other than the dominant economic one. The success of economics as an `elite folk science' is explained by the need of the establishment to ignore uncomfortable knowledge that would destabilize existing institutions. The success of the term circular economy can be seen as an example of socially constructed ignorance in which folk tales are used to depoliticize the sustainability debate and to colonize the future through the endorsement of implausible socio-technical imaginaries. A strategy that can lead to an irresponsible management of expectation: implausible master narratives are impossible to govern. Rather than continuing to impose technocratic plans, as if we knew the optimal thing to do, Post-Normal Science suggests that it is much more effective and responsible to adopt a flexible management approach, exploring the ability of self-organization of social-ecological systems.}, - keywords = {Circular economy,Decoupling,Life-support system,Policy legend,Post-Normal science,Uncomfortable knowledge}, - file = {/Users/fabio/Zotero/storage/FALWCM22/full-text.pdf} -} - -@article{giampietroUnravelingComplexityJevons2018, - ids = {giampietro2018a}, - title = {Unraveling the Complexity of the {{Jevons Paradox}}: {{The}} Link between Innovation, Efficiency, and Sustainability}, - author = {Giampietro, Mario and Mayumi, Kozo}, - year = {2018}, - month = apr, - journal = {Frontiers in Energy Research}, - volume = {6}, - number = {APR}, - publisher = {{Frontiers Media S.A.}}, - issn = {2296598X}, - doi = {10.3389/FENRG.2018.00026}, - urldate = {2022-03-13}, - abstract = {The term "Jevons Paradox" flags the need to consider the different hierarchical scales at which a system under analysis changes its identity in response to an innovation. Accordingly, an analysis of the implications of the Jevons Paradox must abandon the realm of reductionism and deal with the complexity inherent in the issue of sustainability: when studying evolution and real change how can we define "what has to be sustained" in a system that continuously becomes something else? In an attempt to address this question this paper presents three theoretical concepts foreign to conventional scientific analysis: (i) complex adaptive systems-to address the peculiar characteristics of learning and self-producing systems; (ii) holons and holarchy-to explain the implications of the ambiguity found when observing the relation between functional and structural elements across different scales (steady-state vs. evolution); and (iii) Holling's adaptive cycle-to illustrate the existence of different phases in the evolutionary trajectory of a complex adaptive system interacting with its context in which either external or internal constraints can become limiting. These concepts are used to explain systemic drivers of the Jevons Paradox. Looking at society's thermodynamic foundations, sustainability is based on a dynamic balance of two contrasting principles regulating the evolution of complex adaptive systems: the minimum entropy production and the maximum energy flux. The co-existence of these two principles explains why in different situations innovation has to play a different role in the "sustainable development" of society: (i) when society is not subject to external biophysical constraints improvements in efficiency serve to increase the final consumption of society and expand its diversity of functions and structures; (ii) when the expansion of society is limited by external constraints improvements in efficiency should be used to avoid as much as possible the loss of the existing diversity. It is concluded that sustainability cannot be achieved by technological innovations alone, but requires a continuous process of institutional and behavioral adjustment.}, - keywords = {Complex adaptive system,Complexity theory,Energy efficiency,Holon,Innovation,Jevons paradox,MuSIASEM,Rebound effect}, - file = {/Users/fabio/Downloads/fenrg-06-00026.pdf} -} - -@article{Giannetti2020, - title = {Insights on the {{United Nations Sustainable Development Goals}} Scope: {{Are}} They Aligned with a `Strong' Sustainable Development?}, - author = {Giannetti, Biagio F. and Agostinho, Feni and Almeida, Cec{\'i}lia M.V.B. and Liu, Gengyuan and Contreras, Luis E.V. and Vandecasteele, Carlo and Coscieme, Luca and Sutton, Paul and Poveda, Carlos}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {252}, - pages = {119574}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.119574} -} - -@article{giannettiCleanerProductionAchieving2020, - title = {Cleaner Production for Achieving the Sustainable Development Goals}, - author = {Giannetti, B.F. and Agostinho, F. and Eras, J.J. Cabello and Yang, Zhifeng and Almeida, C.M.V.B.}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - pages = {122127}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122127}, - urldate = {2020-06-18} -} - -@article{giasolliIdentifyingManagementTechnology2021, - title = {Identifying {{Management}} of {{Technology}} and Innovation ({{MOT}}) and {{Technology Entrepreneurship}} ({{TE}}) Centers of Excellence}, - author = {Giasolli, Robert and Groen, Dr. Aard and Haak, Robert and Pieck, Martin}, - year = {2021}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {173}, - pages = {121075}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121075}, - urldate = {2021-08-24} -} - -@article{Gibbs2019, - title = {How Environmental Futures Can Inform Decision Making: A Review}, - author = {Gibbs, David A. and Flotemersch, Joe}, - year = {2019}, - journal = {Futures}, - number = {August 2018}, - pages = {0--1}, - publisher = {{Elsevier Ltd}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2019.02.023}, - abstract = {Environmental decision- and policy-making must contend with uncertainty about the future that can hinder proactive environmental decisions, forcing environmental managers into reactive postures. To help prevent this, a variety of methods exist for exploring potential environmental futures and associated uncertainties. Producing environmental futures benefits those involved by supporting a systems-level understanding and expanding thinking beyond ``business as usual''. We review select environmental and non-environmental futures programs that seek to inform decision-making. Review objectives are to: 1) identify and discuss key environmental futures program attributes, and 2) propose program attributes that support successful connection with decision processes. Attributes discussed include purpose and audience, methods, addressing uncertainty and assumptions, relationship to indicator programs, how program values and biases are addressed, the role of goals, and how success is measured and defined. We conclude with recommendations for how to conduct environmental futures programs to be more useful for environmental decisions. These include: combining multiple environmental futures methods to provide complementary insights or highlight inconsistencies in assumptions, including a schematic of assumptions and drivers, and defining success criteria, whenever possible. These practices can help increase the acceptance of environmental futures products in decision-making and increase their short-term and long-term contributions.}, - keywords = {Decision,environmental futures,Environmental futures,Policy,Projection,Scenario}, - file = {/Users/fabio/Zotero/storage/GG4UKNUG/How environmental futures can inform decision making- A review.pdf} -} - -@article{Gibney2016, - title = {`{{Open-hardware}}' Pioneers Push for Low-Cost Lab Kit}, - author = {Gibney, Elizabeth}, - year = {2016}, - month = mar, - journal = {Nature}, - volume = {531}, - number = {7593}, - pages = {147--148}, - issn = {0028-0836}, - doi = {10.1038/531147a}, - file = {/Users/fabio/Zotero/storage/3GB4GHTG/Gibney_2016_‘Open-hardware' pioneers push for low-cost lab kit.pdf} -} - -@article{gibovicIncentivesPlasticRecycling2021, - title = {Incentives for {{Plastic Recycling}}: {{How}} to {{Engage Citizens}} in {{Active Collection}}. {{Empirical Evidence}} from {{Spain}}}, - author = {Gibovic, Denisa and Bikfalvi, Andrea}, - year = {2021}, - month = apr, - journal = {Recycling}, - volume = {6}, - number = {2}, - pages = {29}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2313-4321}, - doi = {10.3390/recycling6020029}, - urldate = {2021-04-29}, - abstract = {{$<$}p{$>$}The recycling target for plastics is expected to increase Europe-wide from 22.5\% to 55\% by 2025, hence the relevance of incentive schemes and the need to reach conclusions about how to encourage families to recycle more. Following this objective, a pilot project was implemented and a virtual reward token called RECICLOS created to encourage recycling among families, using incentives and awards to improve recycling behaviour and a webapp prototype to register the recycled plastic. By the end of the 6-week pilot project, 1053 families were registered on the scheme, representing 10\% of the targeted population in the pilot area of the county of Pla de l'Estany, Catalonia, Spain. The novelties were the introduction of a token, the gamification of incentives through raffles and lotteries, webapp-based direct communication with citizens, and feedback after collecting and registering the recycled material. The multidimensional aspects of recycling activities, their strong relation with human behavioural patterns, and the high demand for communication and interaction mean that mobile technologies find significant application in this field. The results show that people can be influenced and their recycling habits changed by means of varied, effective, and innovative incentive schemes.{$<$}/p{$>$}}, - keywords = {incentives,new technologies,recycling,Spain,waste management}, - file = {/Users/fabio/Zotero/storage/Q23A6SUS/full-text.pdf} -} - -@misc{Gilloz, - title = {{{FoldaRap}} - {{RepRapWiki}}}, - author = {Gilloz, Emmanuel}, - year = {2014}, - journal = {RepRap.org}, - urldate = {2013-07-15}, - howpublished = {http://reprap.org/wiki/FoldaRap}, - keywords = {Bonsai RepStrap,Extrusions,FoldaRap,FoldaRap Batch1,FoldaRap Batch2,FoldaRap Build Manual,FoldaRap Buyers Guide,FoldaRap Distributed Manufacturing,FoldaRap Hall-of-Builds,FoldaRap/fr,FoldaRap2}, - file = {/Users/fabio/Zotero/storage/Z2L6K7FQ/FoldaRap - RepRapWiki.html} -} - -@misc{Gilloz2011, - title = {{{VertX}}}, - author = {Gilloz, Emmanuel}, - year = {2011}, - urldate = {2014-02-21}, - howpublished = {http://www.thingiverse.com/thing:10711}, - keywords = {3D objects,3D printing,digital design,fabrication,laser,laser cutter,physical objects,rapid prototyping,reprap,thingaverse,things,thingyverse} -} - -@misc{Gilloz2011a, - title = {Pocket {{Laser Engraver}}}, - author = {Gilloz, Emmanuel}, - year = {2011}, - urldate = {2014-12-21}, - howpublished = {http://www.thingiverse.com/thing:13242}, - keywords = {3D objects,3D printing,digital design,fabrication,laser,laser cutter,physical objects,rapid prototyping,reprap,thingaverse,things,thingyverse} -} - -@article{Gimenez-Escalante2020, - title = {A Method to Assess the Feasibility of Implementing Distributed {{Localised Manufacturing}} Strategies in the Food Sector}, - author = {{Gimenez-Escalante}, Pedro and {Garcia-Garcia}, Guillermo and Rahimifard, Shahin}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {266}, - pages = {121934}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121934}, - urldate = {2020-05-27}, - abstract = {Large-scale globalised food manufacturing systems have generated competitive advantages through economies of scale. However, these systems often show low environmental sustainability and resilience due to factors such as reliance on global food supply-chain actors and high emissions associated to transportation and storage. This article proposes increasing the sustainability of food production through a transition towards a `Distributed Localised Manufacturing' (DLM) strategy. A novel assessment method is presented to evaluate the feasibility of DLM for different food products using nine distinctive metrics and a decision-support model to identify the most appropriate DLM system model for a specific scenario. An industrial case study is used to demonstrate the application of the novel assessment method. The results show that the DLM assessment method can accurately identify products that can benefit from the DLM strategy and potentially provide environmental and social benefits. In addition, the DLM assessment method demonstrated the ability to categorise key assessment criteria and support the selection of the most appropriate system model for a specific application. Finally, the method also provides guidelines to help to identify benefits, drivers and potential challenges that should be considered in future DLM implementations. In summary, this research presents a practical and powerful assessment method to support the implementation of a DLM strategy in the food-manufacturing sector in order to increase the long-term sustainability of food systems.}, - keywords = {Centralised manufacturing,Distributed manufacturing,Food industry,Food manufacturing,Localised manufacturing,Sustainability}, - file = {/Users/fabio/Zotero/storage/WGPFH8VR/full-text.pdf} -} - -@article{ginanneschiLongtermStrategicThinking2021, - title = {Long-Term Strategic Thinking, the {{Themis}} Method and the Future of Food}, - author = {Ginanneschi, Marco}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - pages = {120468}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120468}, - urldate = {2021-01-13} -} - -@article{gioiaEndLifeBiodegradable2021, - title = {End of {{Life}} of {{Biodegradable Plastics}}: {{Composting}} versus {{Re}}/{{Upcycling}}}, - author = {Gioia, Claudio and Giacobazzi, Greta and Vannini, Micaela and Totaro, Grazia and Sisti, Laura and Colonna, Martino and Marchese, Paola and Celli, Annamaria}, - year = {2021}, - month = oct, - journal = {ChemSusChem}, - volume = {14}, - number = {19}, - pages = {4167--4175}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1864-564X}, - doi = {10.1002/CSSC.202101226}, - urldate = {2022-01-11}, - abstract = {Nowadays the issues related to the end of life of traditional plastics are very urgent due to the important pollution problems that plastics have caused. Biodegradable plastics can help to try to mitigate these problems, but even bioplastics need much attention to carefully evaluate the different options for plastic waste disposal. In this Minireview, three different end-of-life scenarios (composting, recycling, and upcycling) were evaluated in terms of literature review. As a result, the ability of bioplastics to be biodegraded by composting has been related to physical variables and materials characteristics. Hence, it is possible to deduce that the process is mature enough to be a good way to minimize bioplastic waste and valorize it for the production of a fertilizer. Recycling and upcycling options, which could open up many interesting new scenarios for the production of high-value materials, are less studied. Research in this area can be strongly encouraged.}, - pmid = {34363734}, - keywords = {biodegradable plastics,composting,end,life options,of,recycling,upcycling}, - file = {/Users/fabio/Zotero/storage/HE2NHTGD/full-text.pdf} -} - -@article{Giordano1997, - title = {Mechanical Properties of Dense Polylactic Acid Structures Fabricated by Three Dimensional Printing}, - author = {a. Giordano, Russell and Wu, Benjamin M. and Borland, Scott W. and Cima, Linda G. and Sachs, Emanuel M. and Cima, Michael J.}, - year = {1997}, - month = jan, - journal = {Journal of Biomaterials Science, Polymer Edition}, - volume = {8}, - number = {1}, - pages = {63--75}, - issn = {0920-5063}, - doi = {10.1163/156856297X00588}, - urldate = {2014-03-20}, - file = {/Users/fabio/Zotero/storage/VNTZAUDH/Giordano et al. - 1997 - Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing.pdf} -} - -@article{Giovannini2011, - title = {A {{Framework}} to Measure the Progress of Societies}, - author = {Giovannini, Enrico and Hall, Jon and Morrone, Adolfo and Ranuzzi, Giulia}, - year = {2011}, - month = jun, - journal = {Revue d'\'economie politique}, - volume = {Vol. 121}, - number = {1}, - pages = {93--118}, - issn = {0373-2630}, - doi = {10.3917/redp.211.0093}, - abstract = {Over the last three decades, a number of frameworks have been developed to promote and measure well-being, quality of life, human development and sustainable development. Some frameworks use a conceptual approach while others employ a consultative approach, and different initiatives to measure progress will require different frameworks. The aim of this paper is to present a proposed framework for measuring the progress of societies, and to compare it with other progress frameworks that are currently in use around the world. The framework does not aim to be definitive, but rather to suggest a common starting point that the authors believe is broad-based and flexible enough to be applied in many situations around the world. It is also the intention that the framework could be used to identify gaps. In existing statistical standards and to guide work to fill these gaps.}, - keywords = {Indicators,Progress,Quality of life human development,Well-being}, - file = {/Users/fabio/Zotero/storage/XZ4IQD6I/REDP_211_0093.pdf} -} - -@article{Giraldo-Gutierrez2020, - title = {Social Innovation Lab: {{Scenario}} of Social Participation, Social Appropriation and Interdisciplinarity}, - author = {{Giraldo-Guti{\'e}rrez}, Francisco Luis and {Ortiz-Clavijo}, Luis Felipe and Cardona, Giovanni Alberto Zapata}, - year = {2020}, - month = jul, - journal = {Eur. Public Soc. Innov. Rev.}, - volume = {5}, - number = {1}, - pages = {46--57}, - publisher = {{Sinnergiak Social Innovation}}, - issn = {25299824}, - doi = {10.31637/epsir.20-1.5}, - abstract = {Different processes carried out in 2019 by the Metropolitan Technological Institute - ITM, located in the city of Medellin (Colombia), have enabled to consolidate a space for cooperation between academic sector, private sector, and civil society. This article presents a synthesis of the path followed through the explanation of the background and some conceptual elements that had given rise to the Social Innovation Lab - LIS in 2012. Subsequently, several methodologies are presented in order to show different applications in the context of this kind of labs. Finally, the paper presents the LIS working model, in which three axes are established: the social appropriation of knowledge the social appropriation of science, technology, and innovation; the social innovation as a catalyst in the framework of the fourth industrial revolution.}, - keywords = {Social appropriation of knowledge,Social innovation,Social innovation lab,Socioeconomic development} -} - -@article{Girdis2017, - title = {Rethinking {{Timber}}: {{Investigation}} into the {{Use}} of {{Waste Macadamia Nut Shells}} for {{Additive Manufacturing}}}, - author = {Girdis, Jordan and Gaudion, Lauren and Proust, Gw{\'e}na{\"e}lle and L{\"o}schke, Sandra and Dong, Andy}, - year = {2017}, - month = mar, - journal = {JOM}, - volume = {69}, - number = {3}, - pages = {575--579}, - issn = {1047-4838}, - doi = {10.1007/s11837-016-2213-6}, - abstract = {In this article, the feasibility of turning macadamia nutshells, a waste product from the forestry and agricultural industries, into a three-dimensional (3D) printed, innovative, microtimber product is examined by composing a wood plastic feed stock for fusion deposition modeling. Different ratios of micro-ground macadamia nutshells and acrylonitrile butadiene styrene (ABS) plastics were mixed with a binding agent to extrude a range of filaments. By using a commercial 3D printer, these filaments helped to fabricate specimens that were tested in tension and compression. The results show that printed samples of macadamia-nutshell\dbend\_"ABS composites offer a viable alternative to commercially available wood polymer composite filaments. Although they possess similar mechanical properties, they have a lower density, making them suitable for a range of lightweight product applications. The research demonstrates that there are new opportunities for the use of macadamia nutshell filament in additive manufacturing as a result of its enhanced properties compared with traditional wood filaments}, - file = {/Users/fabio/Zotero/storage/KY54DEFN/Rethinking Timber- Investigation into the Use of Waste Macadamia Nut Shells for Additive Manufacturing.pdf} -} - -@article{giriThermomechanicalBehaviorPolymeric2021, - title = {Thermomechanical Behavior of Polymeric Periodic Structures}, - author = {Giri, Tark Raj and Mailen, Russell W.}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - pages = {102512}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102512}, - urldate = {2021-11-30} -} - -@article{Giurco2014, - title = {Circular {{Economy}}: {{Questions}} for {{Responsible Minerals}}, {{Additive Manufacturing}} and {{Recycling}} of {{Metals}}}, - author = {Giurco, Damien and Littleboy, Anna and Boyle, Thomas and Fyfe, Julian and White, Stuart}, - year = {2014}, - journal = {Resources}, - volume = {3}, - number = {2}, - pages = {432--453}, - issn = {2079-9276}, - doi = {10.3390/resources3020432}, - abstract = {The concept of the circular economy proposes new patterns of production, consumption and use, based on circular flows of resources. Under a scenario where there is a global shift towards the circular economy, this paper discusses the advent of two parallel and yet-to-be-connected trends for Australia, namely: (i) responsible minerals supply chains and (ii) additive manufacturing, also known as 3D production systems. Acknowledging the current context for waste management, the paper explores future interlinked questions which arise in the circular economy for responsible supply chains, additive manufacturing, and metals recycling. For example, where do mined and recycled resources fit in responsible supply chains as inputs to responsible production? What is required to ensure 3D production systems are resource efficient? How could more distributed models of production, enabled by additive manufacturing, change the geographical scale at which it is economic or desirable to close the loop? Examples are given to highlight the need for an integrated research agenda to address these questions and to foster Australian opportunities in the circular economy.}, - keywords = {additive manufacturing,circular economy,industrial ecology,megatrends}, - file = {/Users/fabio/Zotero/storage/DAPEQB9Z/Circular Economy Questions for Responsible Minerals, Additive Manufacturing and Recycling of Metals.pdf} -} - -@article{Glaser2017, - title = {New Plastic Recycling Technology}, - author = {Glaser, John A.}, - year = {2017}, - journal = {Clean Technologies and Environmental Policy}, - volume = {19}, - number = {3}, - pages = {627--636}, - publisher = {{Springer Berlin Heidelberg}}, - issn = {16189558}, - doi = {10.1007/s10098-016-1324-7}, - abstract = {\'O Springer-Verlag Berlin Heidelberg (outside the USA) 2017 Greater than 60\% of the total plastic content of municipal solid waste is comprised of polyolefins (low-density, high-density, and linear polyethylene and polypropylene. Poly-ethylene (PE) is the largest volume component but presents a challenge due to the absence of low-energy degradation processes. A recent research report offers a candidate chemistry to fill the needs of a new process. Utilizing tandem catalytic cross-alkane metathesis (CAM) process, researchers have shown that polyethylenes can be degraded under mild reaction conditions using an iridium catalyst as outlined in the following scheme: Using a sequence of dehydrogenation/hydrogenation reactions conducted by two catalysts, the CAM process leads to waxes and liquid fuels as recycled products. The alkane dehydrogenation catalyst abstracts hydrogen from PE and a low molecular weight alkane to form a catalytic intermediate species (Ir-H 2) and an unsaturated intermediate. Olefin metathesis follows by employing a catalyst to combine the alkenes, which are then hydrogenated to products, and com-pletes the decomposition of the PE chain. The recycling of the reaction sequence leads to the formation of liquid fuels and dehydrogenation}, - file = {/Users/fabio/Zotero/storage/CD7FGIEN/New plastic recycling technology.pdf} -} - -@article{gliedtInnovationIntermediariesAccelerating2018, - title = {Innovation Intermediaries Accelerating Environmental Sustainability Transitions}, - author = {Gliedt, Travis and Hoicka, Christina E. and Jackson, Nathan}, - year = {2018}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {174}, - pages = {1247--1261}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.11.054}, - urldate = {2022-03-13}, - abstract = {Institutions in the United States are undergoing modifications that present direct challenges for the environment and society and may result in institutional uncertainty and instability. This article explores whether innovation intermediaries can be employed as a key component of a strategy to create a window of opportunity for green job creation, infrastructure changes, and technological innovation in response to these types of institutional modifications. Based on a systematic literature review, this article outlines a framework that combines institutional modifications with technological innovation and infrastructure development as part of an economic development strategy. Important findings are that connections between innovation intermediaries, such as incubator and accelerator centers, niche actors, such as green champions, and regime actors, such as policy entrepreneurs, show potential to contribute to a green economic development strategy but require further examination for the specific roles played by policy entrepreneurs to help create the conditions for scaling niche experiments and simultaneously disrupting the regime. The key contribution is in defining the role of sustainability-oriented innovation intermediaries at linking local, state and business actions in order to scale-up and influence green economic development in a politically feasible manner during times of institutional uncertainty and instability.}, - keywords = {Champion,Green economic development,Incubator,Instituational uncertainty,Policy entrepreneurship}, - file = {/Users/fabio/Zotero/storage/8BXIB333/full-text.pdf} -} - -@article{GlobalClimateCommons2022, - title = {Global Climate as a Commons \textendash{} {{Decision}} Making on Climate Change in Least Developed Countries}, - year = {2022}, - month = oct, - journal = {Environmental Science \& Policy}, - volume = {136}, - pages = {761--771}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.08.003}, - urldate = {2022-08-16}, - abstract = {The international endeavour to prevent climate change requires action from all parties of the United Nations Framework Convention on Climate Change. M\ldots}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/G9ACIT3W/S1462901122002453.html} -} - -@article{gobertRepairReuseMisalignments2021, - title = {Repair and Reuse: {{Misalignments}} between Stakeholders and Possible Users}, - author = {Gobert, Julie and Allais, Romain and Deroubaix, Jos{\'e}-Fr{\'e}d{\'e}ric}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {317}, - pages = {128454}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128454}, - urldate = {2021-08-24}, - abstract = {As part of the circular economy, grassroots initiatives from the social and solidarity economy (SSE) that promote reuse, reemployment and repair could be seen as `local sustainable initiatives' and as citizen-based contributions to sustainability transitions that require favorable conditions to emerge. Despite a diversity of existing solutions, repair and reuse activities remain limited due to social, institutional and technical lock-ins. This study relies on two French case studies and mobilizes a theoretical framework that combines pragmatic sociology and science technology studies. The study illustrates that there are different modes of commitment to repair and that repair initiatives appeal primarily to people of the militant mode of commitment. Even though a rather broad range of citizens is somehow committed to the practice of repairing, repair initiatives generally fail to attract this broad range of citizens because the type of citizen commitment that they assume occurs only at marginal levels.} -} - -@misc{gockLegalStrategiesCure2018, - type = {{{SSRN Scholarly Paper}}}, - title = {Legal {{Strategies}} to {{Cure}} the {{Plastic Planet}}: {{Corporate Marriage}} and {{Public Health Regulation}} of {{Single-Use Non-Biodegradeable Plastics}}}, - shorttitle = {Legal {{Strategies}} to {{Cure}} the {{Plastic Planet}}}, - author = {Gock, Angela and Dale, Edward and {Ou-Yang}, Lucinda and Wheeler, Sally and Faunce, Thomas Alured}, - year = {2018}, - number = {3323910}, - address = {{Rochester, NY}}, - urldate = {2023-09-05}, - abstract = {The 2018 export ban of recyclables to China provided an additional important reason for Australia in particular to act internationally and domestically to reduce its plastic waste. The problems Australia faces from single use non-biodegradeable plastics are replicated in every nation on Earth. Focusing on the Australian context, this article will examine regulatory approaches to the problem of plastic production, consumption and disposal and its negative impact on public and ecosystem health. It will scrutinise the current legal framework for managing plastic waste at both the Commonwealth, State and international levels, advocating greater regulation. Its regulatory recommendations will include a Pigouvian tax in the form of an excise on plastic production to alter consumer behaviour and raise revenue for further investment in reusable alternatives. They also will include a consideration of mandatory corporate responsibility obligations, a concept we here term `corporate marriage.' Our proposal of corporate marriage is designed to move corporations away from the voluntary and unconnected nature of CSR commitments to a corporation's activities to a model which demands recognition and quantification of harm caused by individual corporations. Corporations could either design a sustainable long-term intervention in partnership with a local community, local government or NGO that directly ameliorated the effects of their corporate activity with annual progress certified by an agreed third party or face an increased taxation burden. The documentary records of this partnership and the annual certified updates would form part of the corporation's registered public documents. Other alternative and additional measures to combat single-use plastic waste as utilised in other jurisdictions will be proposed for Australian implementation.}, - langid = {english}, - keywords = {Corporate Marriage,Corporate Social Responsibility,Non-Biodegradeable Plastics,Plastic Waste,Plastics Recycling,Plastics Tax}, - file = {/Users/fabio/Zotero/storage/QL9Q8J5J/Gock et al_2018_Legal Strategies to Cure the Plastic Planet.pdf} -} - -@article{Godfrey2019, - title = {Waste Plastic, the Challenge Facing Developing Countries\textemdash{{Ban}} It, Change It, Collect It?}, - author = {Godfrey, Linda}, - year = {2019}, - month = jan, - journal = {Recycling}, - volume = {4}, - number = {1}, - pages = {3}, - publisher = {{MDPI AG}}, - issn = {23134321}, - doi = {10.3390/recycling4010003}, - urldate = {2020-03-12}, - abstract = {With changing consumption patterns, growing populations and increased urbanisation, developing countries face significant challenges with regards to waste management. Waste plastic is a particularly problematic one, with single-use plastic leaking into the environment, including the marine environment, at an unprecedented rate. Around the world, countries are taking action to minimise these impacts, including banning single-use plastics; changing petroleum-based plastics to alternative bio-benign products such as paper, glass or biodegradable plastics; and improving waste collection systems to ensure that all waste is appropriately collected and reprocessed or safely disposed. However, these ``solutions'' are often met with resistance, from business, government or civil society, due to the intended and unintended consequences, leaving many questioning the most appropriate solution to reducing the leakage. This paper argues that there is no one single solution to addressing the leakage of plastic into the environment, but that the solution is likely to be a combination of the three approaches, based on local considerations.}, - keywords = {Biodegradable,Leakage,Marine litter,Plastic,Policy,Waste}, - file = {/Users/fabio/Zotero/storage/92EELQB4/full-text.pdf} -} - -@article{Godoi2016, - title = {3d Printing Technologies Applied for Food Design: {{Status}} and Prospects}, - author = {Godoi, Fernanda C. and Prakash, Sangeeta and Bhandari, Bhesh R.}, - year = {2016}, - journal = {Journal of Food Engineering}, - volume = {179}, - pages = {44--54}, - publisher = {{Elsevier Ltd}}, - issn = {02608774}, - doi = {10.1016/j.jfoodeng.2016.01.025}, - abstract = {The use of 3-Dimensional (3D) printing, also known as additive manufacturing (AM), technology in food sector has a great potential to fabricate 3D constructs with complex geometries, elaborated textures and tailored nutritional contents. For this reason, 3D technology is driving major innovations in food industry. Here, we review the use of 3D printing techniques to design food materials. Our discussions bring a new insight into how essential food material properties behave during application of 3D printing techniques. We suggest that the rational design of 3D food constructs relies on three key factors: (1) printability, (2) applicability and (3) post-processing. Especial emphasis is devoted to how the advantages/limitations of 3D printing techniques affect the end-use properties of the printed food constructs.}, - isbn = {0260-8774}, - keywords = {3D printing,3D-food construct,Additive manufacturing,Food design,Material properties,Printability} -} - -@article{Goduscheit2014, - title = {Innovation Promoters - {{A}} Multiple Case Study}, - author = {Goduscheit, Ren{\'e} Chester}, - year = {2014}, - month = apr, - volume = {43}, - number = {3}, - pages = {525--534}, - publisher = {{Elsevier Inc.}}, - issn = {00198501}, - doi = {10.1016/j.indmarman.2013.12.020}, - abstract = {This paper empirically examines the role of innovation promoters in loosely-coupled inter-organisational innovation projects. With a starting point from existing literature on innovation promoters, it seeks to develop a theoretical framework for analysing the particular challenges of inter-organisational innovation projects. Data from seven inter-organisational innovation projects provides the empirical setting of the paper, and these data are analysed on the basis of an inductive, interpretive approach. The paper results in the development of four types of innovation promoters (power, expert, process and relationship). In addition, the results indicate the substantial challenges of dividing the labour between several promoters in inter-organisational innovation projects. The paper concludes with some managerial and research implications. \textcopyright{} 2013 Elsevier Inc.}, - keywords = {Innovation networks,Innovation promoters,Open innovation} -} - -@article{goedkoopReportCharacterisation2009, - title = {Report {{I}}: {{Characterisation}}}, - author = {Goedkoop, Mark and Heijungs, Reinout and Huijbregts, Mark}, - year = {2009}, - pages = {132}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/LZDQGPPV/Goedkoop et al. - Report I Characterisation.pdf} -} - -@article{Goetz2020, - title = {Latent Innovation in Local Economies}, - author = {Goetz, Stephan J. and Han, Yicheol}, - year = {2020}, - month = mar, - journal = {Research Policy}, - volume = {49}, - number = {2}, - pages = {103909}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103909} -} - -@article{Gok2014, - title = {Optimization of Processing Parameters of a Developed New Driller System for Orthopedic Surgery Applications Using {{Taguchi}} Method}, - author = {Gok, Kadir and Gok, Arif and Kisioglu, Yasin}, - year = {2014}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {76}, - number = {5-8}, - pages = {1437--1448}, - issn = {14333015}, - doi = {10.1007/s00170-014-6327-0}, - abstract = {In bone drilling process during the surgical operations, heating increases due to high bone/drill contact friction that damages the bones and soft tissues. The overheating is usually recognized as the temperature rise exceeds 47~\textdegree C, a critical limit, above which the drilling causes osteonecrosis. In this study, a new driller system is developed to prevent the overheating in orthopedic surgeries. It has a closed-circuit cooling system to reduce the undesired temperature rise during the drilling process. It is also designed and manufactured as a prototype and tested experimentally in vitro by drilling fresh bovine bones using different processing parameters. In the drilling tests, the temperature levels of the bones are measured using thermocouple sensors. Based on the measured results, the driller system provides a valuable temperature reduction around 25~\% to prevent necrosis in low spindle speeds (rpm) usually preferred by surgeons. The measured temperatures from the tests of the driller system with a cooling system were compared with the use of regular bone drilling process without cooling. The optimum processing parameters of the new driller system with/without coolant are calculated using the Taguchi method, and the most effective parameter is found as rpm. \textcopyright{} 2014, Springer-Verlag London.}, - isbn = {0017001463}, - keywords = {Bone drilling,Driller system,Necrosis,Taguchi method}, - file = {/Users/fabio/Zotero/storage/XPASQCLB/Optimization of processing parameters of a developed new driller system for orthopedic surgery applications using Taguchi method.pdf} -} - -@book{Goldsmith2014, - title = {Soybean {{Innovation Laboratory}}}, - author = {Goldsmith, Peter}, - year = {2014}, - isbn = {978-83-7789-322-7} -} - -@article{goldsteinQuantificationUrbanMetabolism2013, - title = {Quantification of Urban Metabolism through Coupling with the Life Cycle Assessment Framework: Concept Development and Case Study}, - shorttitle = {Quantification of Urban Metabolism through Coupling with the Life Cycle Assessment Framework}, - author = {Goldstein, Benjamin and Birkved, Morten and Quitzau, Maj-Britt and Hauschild, Michael}, - year = {2013}, - month = jul, - journal = {Environmental Research Letters}, - volume = {8}, - number = {3}, - pages = {035024}, - publisher = {{IOP Publishing}}, - issn = {1748-9326}, - doi = {10.1088/1748-9326/8/3/035024}, - urldate = {2022-10-20}, - abstract = {Cities now consume resources and produce waste in amounts that are incommensurate with the populations they contain. Quantifying and benchmarking the environmental impacts of cities is essential if urbanization of the world's growing population is to occur sustainably. Urban metabolism (UM) is a promising assessment form in that it provides the annual sum material and energy inputs, and the resultant emissions of the emergent infrastructural needs of a city's sociotechnical subsystems. By fusing UM and life cycle assessment (UM\textendash LCA) this study advances the ability to quantify environmental impacts of cities by modeling pressures embedded in the flows upstream (entering) and downstream (leaving) of the actual urban systems studied, and by introducing an advanced suite of indicators. Applied to five global cities, the developed UM\textendash LCA model provided enhanced quantification of mass and energy flows through cities over earlier UM methods. The hybrid model approach also enabled the dominant sources of a city's different environmental footprints to be identified, making UM\textendash LCA a novel and potentially powerful tool for policy makers in developing and monitoring urban development policies. Combining outputs with socioeconomic data hinted at how these forces influenced the footprints of the case cities, with wealthier ones more associated with personal consumption related impacts and poorer ones more affected by local burdens from archaic infrastructure.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/8WG4C4JV/Goldstein et al. - 2013 - Quantification of urban metabolism through couplin.pdf} -} - -@article{golicnikmarusicFrameUnderstandingBetter2023, - title = {A Frame of Understanding to Better Link Nature-Based Solutions and Urban Planning}, - author = {Goli{\v c}nik Maru{\v s}i{\'c}, Barbara and Dremel, Manca and Ravnikar, {\v Z}iva}, - year = {2023}, - month = aug, - journal = {Environmental Science \& Policy}, - volume = {146}, - pages = {47--56}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2023.05.005}, - urldate = {2023-05-31}, - abstract = {Reinforcement of the concept of nature-based solutions in urban environments calls for their better introduction and linkage into urban planning. The paper is focused on the relationship between nature-based solutions and spatial realities, based on reciprocity among natural processes and urban patterns, emphasising the recognition of using and mimicking natural processes in urban environments. A classification framework as a form of knowledge aggregation is suggested. A matrix that simultaneously addresses the role of natural processes in nature-based solutions and the ability of such processes to deliver results for improving urban environments is proposed. Accordingly, there are three characteristic groups of solutions suggested, (1) those only using natural processes, (2) those using and mimicking natural processes and (3) those only mimicking natural processes, which implementation potentials are commented against four different types of urban patterns, to show what group of the nature-based solutions may best suit any type of spatial agglomeration. Beside green infrastructure as currently the most often addressed manifestation of nature-based solutions in cities, the paper reflects also on the physical processes as inevitable parts of nature. In relation to urban planning, sites and their characteristics are seen as a crucial aspect of nature-based solutions. The arguments are built upon exhaustive literature and case studies review, resulted in the matrix showing the matching relations among nature-based solutions and societal challenges aiming for better urban environment. Additionally, there are also sets of recommendations for bridging the policy-implementation gaps to bring nature-based solutions closer to urban planning, suggested.}, - langid = {english}, - keywords = {Conceptual framework,Nature-based solutions,Sustainable urban planning,Urban policy}, - file = {/Users/fabio/Zotero/storage/YMDCHG7S/Goličnik Marušić et al. - 2023 - A frame of understanding to better link nature-bas.pdf;/Users/fabio/Zotero/storage/HG8BXINB/S1462901123001247.html} -} - -@article{golkaramQualityModelRecycled2022, - ids = {golkaram2022a}, - title = {Quality Model for Recycled Plastics ({{QMRP}}): {{An}} Indicator for Holistic and Consistent Quality Assessment of Recycled Plastics Using Product Functionality and Material Properties}, - author = {Golkaram, Milad and Mehta, Rajesh and Taveau, Mathilde and Schwarz, Anna and Gankema, Harold and Urbanus, Jan Harm and De Simon, Lia and {Cakir-Benthem}, Seda and {van Harmelen}, Toon}, - year = {2022}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {132311}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.132311}, - urldate = {2022-05-30} -} - -@article{Goll2019, - title = {Additive Manufacturing of Soft Magnetic Materials and Components}, - author = {Goll, D. and Schuller, D. and Martinek, G. and Kunert, T. and Schurr, J. and Sinz, C. and Schubert, T. and Bernthaler, T. and Riegel, H. and Schneider, G.}, - year = {2019}, - month = may, - journal = {Additive Manufacturing}, - volume = {27}, - pages = {428--439}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.02.021} -} - -@article{Golob2019, - title = {Environmental Consciousness of {{European}} Consumers: {{A}} Segmentation-Based Study}, - author = {Golob, Ur{\v s}a and Kronegger, Luka}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {221}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2019.02.197}, - abstract = {{$<$}div{$><$}h2{$>$}Abstract{$<$}/h2{$><$}p{$>$}Sustainable consumption is not a one-dimensional phenomenon; it entails various attitudinal and behavioural dimensions. To promote sustainability, decision-makers are encouraged to recognise the heterogeneity of sustainable consumers. The aim of this study was to examine a model of environmental consciousness and use its variables to segment European Union (EU) consumers. The study used a structural equation modelling approach to verify the environmental consciousness model and hierarchical agglomeration method for segmentation. It was based on secondary data on environmental issues gathered in 28 EU member states. Personal attitudinal dimensions in the model explained a relatively high proportion of the variance in sustainable behaviour. The segmentation analysis yielded three distinct segments that differ in their environmental consciousness and are affiliated with different EU country clusters. The use of secondary data to a certain extent limited the analysis. However, its strengths are its scope, the potential generalisability of the results and comparability based on EU data.{$<$}/p{$><$}/div{$>$}}, - file = {/Users/fabio/Zotero/storage/IG8IVQX6/Environmental consciousness of European consumers- A segmentation-based study.pdf} -} - -@article{gomesEcosystemManagementAchievements2021, - title = {Ecosystem Management: {{Past}} Achievements and Future Promises}, - author = {Gomes, Leonardo Augusto de Vasconcelos and Chaparro, Ximena Alejandra Flechas and Facin, Ana Facin Figueiredo and Borini, Felipe Mendes}, - year = {2021}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {171}, - pages = {120950}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120950}, - urldate = {2021-07-05} -} - -@article{gomesEcosystemPolicyRoadmapping2021, - title = {Ecosystem Policy Roadmapping}, - author = {Gomes, Leonardo Augusto de Vasconcelos and Fleury, Andr{\'e} Leme and de Oliveira, Maicon Gouv{\^e}a and Facin, Ana Lucia Figueiredo}, - year = {2021}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {170}, - pages = {120885}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120885}, - urldate = {2021-06-15} -} - -@article{gomesRoleConsumerMindsets2022, - title = {Role of Consumer Mindsets, Behaviour, and Influencing Factors in Circular Consumption Systems: {{A}} Systematic Review}, - author = {Gomes, Giovana M. and Moreira, Natalia and Ometto, Aldo R.}, - year = {2022}, - month = apr, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.04.005}, - urldate = {2022-04-11} -} - -@article{Gomez-Baggethun2010, - title = {The History of Ecosystem Services in Economic Theory and Practice: {{From}} Early Notions to Markets and Payment Schemes}, - author = {{G{\'o}mez-Baggethun}, Erik and {de Groot}, Rudolf and Lomas, Pedro L. and Montes, Carlos}, - year = {2010}, - month = apr, - journal = {Ecological Economics}, - volume = {69}, - number = {6}, - pages = {1209--1218}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2009.11.007}, - urldate = {2021-04-23}, - abstract = {This paper reviews the historic development of the conceptualization of ecosystem services and examines critical landmarks in economic theory and practice with regard to the incorporation of ecosystem services into markets and payment schemes. The review presented here suggests that the trend towards monetization and commodification of ecosystem services is partly the result of a slow move from the original economic conception of nature's benefits as use values in Classical economics to their conceptualization in terms of exchange values in Neoclassical economics. The theory and practice of current ecosystem services science are examined in the light of this historical development. From this review, we conclude that the focus on monetary valuation and payment schemes has contributed to attract political support for conservation, but also to commodify a growing number of ecosystem services and to reproduce the Neoclassical economics paradigm and the market logic to tackle environmental problems. \textcopyright{} 2009 Elsevier B.V. All rights reserved.}, - keywords = {Commodification,Economic history,Ecosystem services,Exchange value,Market based instruments,Use value}, - file = {/Users/fabio/Zotero/storage/AV4ZJTPQ/Gómez-Baggethun et al. - 2009 - The history of ecosystem services in economic theory and practice From early notions to markets and pay.pdf} -} - -@article{Gomez-Baggethun2013, - title = {Classifying and Valuing Ecosystem Services for Urban Planning}, - author = {{G{\'o}mez-Baggethun}, Erik and Barton, David N.}, - year = {2013}, - month = feb, - journal = {Ecological Economics}, - volume = {86}, - pages = {235--245}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2012.08.019}, - urldate = {2021-08-24}, - keywords = {Cities,Ecosystem disservices,Ecosystem services,Green infrastructure,Resilience,Urban ecosystems,Urban planning,Valuation}, - file = {/Users/fabio/Zotero/storage/D6MET55V/Gómez-Baggethun, Barton - 2012 - Classifying and valuing ecosystem services for urban planning.pdf} -} - -@article{gomez-baggethunMarketsWeTrust2015, - title = {In Markets We Trust? {{Setting}} the Boundaries of {{Market-Based Instruments}} in Ecosystem Services Governance}, - author = {{G{\'o}mez-Baggethun}, Erik and Muradian, Roldan}, - year = {2015}, - doi = {10.1016/j.ecolecon.2015.03.016}, - urldate = {2021-08-24}, - abstract = {A growing tendency to frame environmental problems as a failure to price ecosystem services has coincided with the rise of so-called "Market-Based Instruments" (MBIs). The aim of this introductory article to the special section "In markets we trust? Contrasting views on the performance and legitimacy of Market-Based Instruments in global environmental governance" is to promote critical reflection about the nature, scope and limits of MBIs in ecosystem services governance and to provide guidance on where the boundaries for the application of markets ought to be set. First, we examine the role that methodological assumptions and implicit normative positions play in shaping academic perception of the effectiveness and legitimacy of MBIs. Second, we examine MBIs in the broader ideological context and socio-political processes that have favored their development and implementation. Third, we test claims of the literature on MBIs against insights and data from case studies presented in the special section. Fourth, we discuss the scope and limits of markets in ecosystem services governance in the light of biophysical, institutional, and normative boundaries. We end with a summary of concluding remarks from the special section and by identifying critical tasks for the scientific and policy agenda on ecosystem services governance.}, - keywords = {Commodification,Ecosystem,Governance,Markets,Payments for,Services}, - file = {/Users/fabio/Zotero/storage/N3XVQ9TM/full-text.pdf} -} - -@article{gomez-baggethunRethinkingWorkJust2022, - title = {Rethinking Work for a Just and Sustainable Future}, - author = {{Gomez-Baggethun}, Erik}, - year = {2022}, - month = oct, - journal = {Ecological Economics}, - volume = {200}, - pages = {107506}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2022.107506}, - urldate = {2022-08-11}, - abstract = {Except for sleep, humans spend more of their lifetimes on work than on any other activity. Many people take for granted the centrality of work in society, conceiving the prevailing 40~h workweeks in high-income countries as a `natural' configuration of time. However, work and working time have been fiercely contested phenomena and have taken many different forms throughout history as they were reshaped by technological development, social struggle, and changing cultural values. Drawing on insight from history, anthropological research, and time use studies, this paper attempts to broaden the frames harnessing current debates about the future of work. First, we examine evolving conceptions of work in different cultures. Second, we review patterns of working time throughout history, contrasting some widely held assumptions against the background of the long dur\'ee. Finally, we present ideas and principles to rethink dominant conceptions about the meaning, purpose, volume, content, distribution, and remuneration of work along ecological economic principles of sustainability and justice.}, - langid = {english}, - keywords = {Automation,Degrowth,History,Post-growth,Sustainability,Utopia,Work time reduction}, - file = {/Users/fabio/Zotero/storage/AYC58JFK/Gomez-Baggethun_2022_Rethinking work for a just and sustainable future.pdf;/Users/fabio/Zotero/storage/9T6JFLPD/S0921800922001689.html} -} - -@article{gomezDilemmaPlasticBags2021, - title = {The Dilemma of Plastic Bags and Their Substitutes: {{A}} Review on {{LCA}} Studies.}, - author = {G{\'o}mez, Iv{\'a}n Dar{\'i}o L{\'o}pez and Escobar, Alejandro Serna}, - year = {2021}, - month = nov, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2021.11.021}, - urldate = {2021-11-30} -} - -@article{Goncalves2021, - title = {Back to Basics: Fundamental Principles of System Dynamics and Queueing Theory}, - author = {Gon{\c c}alves, Paulo}, - year = {2021}, - month = dec, - journal = {System Dynamics Review}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {0883-7066}, - doi = {10.1002/sdr.1699}, - urldate = {2022-01-17}, - file = {/Users/fabio/Zotero/storage/2ZMT3TPS/full-text.pdf} -} - -@article{Gonella2019, - title = {Is Technology Optimism Justified? {{A}} Discussion towards a Comprehensive Narrative}, - author = {Gonella, F. and Almeida, C.M.V.B. and Fiorentino, G. and Handayani, K. and Span{\`o}, F. and Testoni, R. and Zucaro, A.}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {223}, - pages = {456--465}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.126}, - file = {/Users/fabio/Zotero/storage/UPMLSQX7/Is technology optimism justified A discussion towards a comprehensive narrative.pdf} -} - -@article{gonellaRegenerativeEconomyInnovative2023, - title = {Towards a Regenerative Economy: {{An}} Innovative Scale to Measure People's Awareness of the Circular Economy}, - shorttitle = {Towards a Regenerative Economy}, - author = {Gonella, J{\'e}ssica dos Santos Leite and Godinho Filho, Moacir and Ganga, Gilberto Miller Dev{\'o}s and Latan, Hengky and Chiappetta Jabbour, Charbel Jose}, - year = {2023}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {421}, - pages = {138390}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.138390}, - urldate = {2023-08-31}, - abstract = {The concept of the circular economy (CE) has gained attention as a means of achieving environmental goals and economic sustainability. People's awareness of CE is critical in achieving a more circular and regenerative economy, but there is a lack of consistent tools to measure this awareness. This research aims to develop a reliable and valid scale to measure people's awareness of CE. A systematic literature review identifies the main constructs of this scale, and the validation process includes structured interviews with experts, use of the Q-Sort method, statistical methods, and a pre-test with 144 respondents using exploratory factor analysis and non-probability sampling. The final proposed scale is tested via a survey of 820 respondents, with confirmatory factor analysis used to ensure reliability and validity. The proposed scale can be used to assess people's awareness of different CE strategies and, thus inform strategies, actions, and policies to achieve a more regenerative economy. The scale represents a theoretical contribution by providing uniformity and can be applied in different contexts. It also has practical applications for companies and governments to measure the level of awareness people have towards CE.}, - keywords = {Circular economy,People's awareness,Scale development}, - file = {/Users/fabio/Zotero/storage/HD67WII6/S0959652623025489.html} -} - -@article{Gong2020, - ids = {gong2020a}, - title = {Investigation into Circular Economy of Plastics: {{The}} Case of the {{UK}} Fast Moving Consumer Goods Industry}, - author = {Gong, Yu and Putnam, Ellis and You, Weimu and Zhao, Changping}, - year = {2020}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {244}, - pages = {118941}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118941}, - urldate = {2022-01-04}, - abstract = {Despite the recognised importance of the issue of plastic waste and an emerging circular economy (CE) in recent years, there is a lack of comprehensive and relevant studies regarding CE and the role of plastics. This study addresses a significant gap in the literature by revealing current initiatives implemented in the UK fast moving consumer goods (FMCG) industry through an in-depth exploration of four case organisations that have committed to the UK Plastic Pact, a pioneering collective initiative on plastic recycling. The study discloses a variety of present initiatives within the industry including the removal of unrecyclable plastics, packaging innovation, in-store retailer schemes, and label modifications. Collaboration was concluded as an essential enabler, internally and across the industry. Fundamental barriers were identified as inadequate infrastructure to support plastics in the CE and technical implications of packaging.}, - keywords = {Barriers and constraints,Circular economy,FMCG industry,Plastic packaging,Plastic recycling,UK plastic pact}, - file = {/Users/fabio/Zotero/storage/FHK7JWIF/Gong et al. - 2020 - Investigation into circular economy of plastics T.pdf} -} - -@article{gongDevelopingUnifiedDefinition2020, - title = {Developing a Unified Definition of Digital Transformation}, - author = {Gong, Cheng and Ribiere, Vincent}, - year = {2020}, - month = dec, - journal = {Technovation}, - pages = {102217}, - publisher = {{Elsevier}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2020.102217}, - urldate = {2021-01-01} -} - -@article{gontard2022, - title = {Recognizing the Long-Term Impacts of Plastic Particles for Preventing Distortion in Decision-Making}, - author = {Gontard, Nathalie and David, Gr{\'e}goire and Guilbert, Alice and Sohn, Joshua}, - year = {2022}, - month = jun, - journal = {Nature Sustainability}, - volume = {5}, - number = {6}, - pages = {472--478}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-022-00863-2}, - urldate = {2022-09-01}, - abstract = {There is a considerable knowledge gap regarding the long-term fate of plastics in the environment. Acknowledging this gap, in the context of life cycle assessment methods, is critical to account for the long-term fate of plastics in the decision-making process. Ignoring the long-term potential for environmental and health damage from plastic particles makes it difficult to defend a quantitative environmental assessment comparing fossil-based conventional plastics with other alternative materials. This Review highlights that the addition of a plastic particulate footprint as a midpoint impact indicator in life cycle assessments should be considered to quantify these overlooked long-term impacts.}, - copyright = {2022 Springer Nature Limited}, - langid = {english}, - keywords = {Environmental impact,Materials science,Sustainability}, - file = {/Users/fabio/Zotero/storage/SKJGBEED/Gontard et al. - 2022 - Recognizing the long-term impacts of plastic parti.pdf;/Users/fabio/Zotero/storage/4EZLZXNS/s41893-022-00863-2.html} -} - -@article{gonzalez-azcarateWhyBuyingDirectly2021, - title = {Why Buying Directly from Producers Is a Valuable Choice? {{Expanding}} the Scope of Short Food Supply Chains in {{Spain}}.}, - author = {{Gonz{\'a}lez-Azc{\'a}rate}, Mario and Cruz-Mace{\'i}n, Jos{\'e} Luis and Bardaj{\'i}, Isabel}, - year = {2021}, - month = jan, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.01.003}, - urldate = {2021-01-12} -} - -@incollection{Gonzalez-Gomez2012a, - title = {A {{New Open Source 3D-Printable Mobile Robotic Platform}} for {{Education}}}, - booktitle = {Advances in {{Autonomous Mini Robots}}}, - author = {{Gonzalez-Gomez}, Juan and {Valero-Gomez}, Alberto and {Prieto-Moreno}, A. and Abderrahim, Mohamed}, - year = {2012}, - pages = {49--62}, - publisher = {{Springer Berlin Heidelberg}}, - address = {{Berlin, Heidelberg}}, - doi = {10.1007/978-3-642-27482-4_8}, - isbn = {978-3-642-27482-4}, - file = {/Users/fabio/Zotero/storage/KW6CAFLP/Gonzalez-Gomez et al. - 2012 - A New Open Source 3D-Printable Mobile Robotic Platform for Education(2).pdf} -} - -@article{Gonzalez-Moreno2019, - title = {Many or Trusted Partners for Eco-Innovation? {{The}} Influence of Breadth and Depth of Firms' Knowledge Network in the Food Sector}, - author = {{Gonz{\'a}lez-Moreno}, {\'A}ngela and Triguero, {\'A}ngela and {S{\'a}ez-Mart{\'i}nez}, Francisco Jos{\'e}}, - year = {2019}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {147}, - pages = {51--62}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.06.011}, - urldate = {2020-05-21}, - abstract = {Although literature on open eco-innovation has recently increased, empirical research on this topic in traditional low-tech sectors is still relatively scarce. The present paper examines how open innovation activities can promote eco-innovations in the food industry, an industry that is sometimes considered a technological laggard with traditionally low cooperation. The paper focuses on the relationship between a firm's interactions with stakeholders, particularly the breadth and the depth of the firm's knowledge network and the firm's propensity to develop different types of eco-innovations. Using a novel and more accurate measure of breadth and depth and addressing endogeneity with instrumental variables, the paper studies their influence on technological eco-innovation in a random sample of 279 food firms in Spain. The results show that coordination difficulties and bounded rationality explain an inverted U shape in the relationship of breadth of external knowledge sources and the propensity to eco-innovate both in product and process eco-innovations. Additionally, our findings confirm that it is important to rely on deep, frequent and intense relationships with stakeholders in order to create the required atmosphere to foster fluent knowledge sharing among partners specially to develop eco-process innovations, but a learning effect appears. Future research should extend the analysis to other countries and sectors to address the limitations of this study.}, - keywords = {Agro-food industry,Breadth,Depth,Eco-innovation,Instrumental variable,Open-innovation} -} - -@article{Gonzalez-Rivera2019, - title = {Forecasting Issues in Developing Economies}, - author = {{Gonz{\'a}lez-Rivera}, Gloria and Loungani, Prakash and Sheng, Xuguang (Simon)}, - year = {2019}, - month = apr, - journal = {International Journal of Forecasting}, - issn = {01692070}, - doi = {10.1016/j.ijforecast.2019.04.005} -} - -@article{GonzalezHenriquez2019, - title = {Polymers for Additive Manufacturing and {{4D-printing}}: {{Materials}}, Methodologies, and Biomedical Applications}, - author = {{Gonz{\'a}lez-Henr{\'i}quez}, Carmen M. and {Sarabia-Vallejos}, Mauricio A. and {Rodriguez-Hernandez}, Juan}, - year = {2019}, - month = jul, - journal = {Progress in Polymer Science}, - volume = {94}, - pages = {57--116}, - publisher = {{Elsevier Ltd}}, - issn = {00796700}, - doi = {10.1016/j.progpolymsci.2019.03.001}, - abstract = {Additive manufacturing (AM), also known as additive manufacturing, permits the fabrication of fully customized objects with a high level of geometrical complexity at reduced fabrication time and cost. Besides metals and ceramics, polymers have become a widely researched class of materials for applications in AM. The synthetic versatility and adaptability, as well as the wide range of properties that can be achieved using polymer materials, have rendered polymers the most widely employed class of materials for AM methodologies. In this review, the basic principles, considering the printing mechanism as well as the advantages and disadvantages, of the most relevant polymer AM technologies are described. The particular features, properties and limitations of currently employed polymer systems in the various AM technology areas are presented and analyzed. Subsequently, 4D printing, that is the fabrication of 3D printed structures that are cabable to change with time, is discussed. A brief description of the polymeric materials and technologies under development for 4D printed structures as well as the different shape changes explored are presented. Finally, based on the characteristics of the polymers employed for each technology illustrative examples of the principal applications are discussed.}, - keywords = {Fused deposition modeling,Laser sintering,Photopolymerization,Polymers in additive manufacturing,Stereolithography,Thermoplastics}, - file = {/Users/fabio/Zotero/storage/PUFY2CVP/Polymers for additive manufacturing and 4D-printing- Materials, methodologies, and biomedical applications.pdf} -} - -@article{Goodwin2021, - title = {Benchmarking Urban Performance against Absolute Measures of Sustainability \textendash{} {{A}} Review}, - author = {Goodwin, Kylie and Wiedmann, Thomas and Chen, Guangwu and Teh, Soo Huey}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {314}, - pages = {128020}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128020}, - urldate = {2021-07-05}, - abstract = {Cities are a key target in the global quest for sustainability and are increasingly acting independently to take the lead in sustainability initiatives. To truly achieve sustainability, cities need to ensure that their consumption is compatible with absolute sustainability and validate achievements from a perspective that includes transboundary impacts. The aim of this review is to assess how well these topics are incorporated into commonly used urban sustainability assessment methods, using the safe and just space (SJS) framework definition of a minimum acceptable threshold for both ecological stability and standard of living. The review identified 277 different sustainability indicator frameworks that have been applied to cities and undertook a detailed assessment of the most commonly cited of these. Consumption-based footprint studies were separately assessed to determine the extent to which they measure SJS indicators for cities. Both indicator frameworks and footprint studies had a focus on boundaries of increasing risk, including carbon, water, and land use; however few measured highly exceeded boundaries including nitrogen and phosphorus use, biodiversity, and possibly chemical pollution. Social impacts were well covered in indicator frameworks, except food intake, but largely absent from footprint studies. Cities are largely not measuring their impact on planetary tipping points or transboundary impacts, risking resolving some environmental issues while exacerbating others.}, - keywords = {Absolute sustainability,City sustainability,Consumption-based accounting,Planetary boundaries} -} - -@article{Gopalakrishnan2016, - title = {Assessing the Capacity of Local Ecosystems to Meet Industrial Demand for Ecosystem Services}, - author = {Gopalakrishnan, Varsha and Bakshi, Bhavik R. and Ziv, Guy}, - year = {2016}, - month = sep, - journal = {AIChE Journal}, - volume = {62}, - number = {9}, - pages = {3319--3333}, - publisher = {{John Wiley and Sons Inc}}, - issn = {15475905}, - urldate = {2021-06-11}, - abstract = {Despite the importance of ecosystems, engineering activities continue to ignore or greatly undervalue their role. Consequently, engineered systems often overshoot nature's capacity to support them, causing ecological degradation. Such systems tend to be inherently unsustainable, and they often fail to benefit from nature's ability to provide essential goods and services. This work explores the idea of including ecosystems in chemical processes, and assesses whether such a techno-ecological synergistic system can operate within ecological constraints. The demand for ecosystem services is quantified by emissions and resources used, while the supply is provided by ecosystems on the manufacturing site. Application to a biodiesel manufacturing site demonstrates that ecosystems can be economically and environmentally superior to conventional technologies for making progress toward zero emissions and net positive impact manufacturing. These results highlight the need for shifting the paradigm of engineering from that of dominating nature to embracing nature and respecting its limits. \textcopyright{} 2016 American Institute of Chemical Engineers AIChE J, 62: 3319\textendash 3333, 2016.}, - keywords = {design,ecosystems,green engineering,process synthesis,unit operations}, - file = {/Users/fabio/Zotero/storage/I3SL2KWM/Gopalakrishnan, Bakshi, Ziv - 2016 - Assessing the capacity of local ecosystems to meet industrial demand for ecosystem services.pdf} -} - -@article{Gopalakrishnan2018, - title = {Ecosystems as Unit Operations for Local Techno-Ecological Synergy: {{Integrated}} Process Design with Treatment Wetlands}, - author = {Gopalakrishnan, Varsha and Bakshi, Bhavik R}, - year = {2018}, - journal = {AIChE Journal}, - volume = {64}, - number = {7}, - pages = {2390--2407}, - issn = {15475905}, - doi = {10.1002/aic.16093}, - urldate = {2021-08-31}, - abstract = {Despite the critical importance of ecological systems for sustaining all chemical and manufacturing processes, process design has kept nature outside its system boundary. Recent efforts for sustainable process design aim to reduce environmental impact, but no design method considers the capacity of ecosystems to supply the goods and services that are needed to sustain a process. Overcoming this deficiency of conventional process design is essential to transform the chemical industry into an activity that respects ecological constraints and results in a net positive societal impact. As an important step toward meeting this goal, this work expands the boundary of process design to include ecosystems as unit operations in traditional design. Similar to tasks performed by conventional unit operations, ecological processes perform ecosystem functions resulting in goods and services required by the technological system. The goal behind designing integrated techno-ecological process flowsheets is to balance the ecosystem service demand of technological systems with the ecosystem service supply of ecological systems. Systems are optimized to balance the demand and supply subject to unit operation level constraints of technological and ecological systems, and interactions between detailed process level variables and ecological variables are explored. The Techno-Ecological Synergy (TES) Design method is developed and applied to a biofuel production system, considering ecosystem services like water provisioning and water quality regulation provided by wetland ecosystems. Comparing the integrated TES design with conventional techno-centric design shows that TES design can result in net positive impact manufacturing: a case where the ecosystem service supply is equal to or exceeds the demand, with little or no compromises in process profitability. These results should encourage close integration between technological and ecological systems while designing sustainable processes, and identify many challenges for developing TES of individual processes and across the life cycle. \textcopyright{} 2018 American Institute of Chemical Engineers AIChE J, 64: 2390\textendash 2407, 2018.}, - keywords = {ecosystems,environmental engineering,process design,process synthesis,sustainable engineering}, - file = {/Users/fabio/Zotero/storage/F4P27YB7/full-text.pdf} -} - -@article{gopalakrishnanNatureBasedSolutionsCan2019, - title = {Nature-{{Based Solutions Can Compete}} with {{Technology}} for {{Mitigating Air Emissions Across}} the {{United States}}}, - author = {Gopalakrishnan, Varsha and Ziv, Guy and Hirabayashi, Satoshi and Bakshi, Bhavik R.}, - year = {2019}, - month = nov, - journal = {Environmental Science \& Technology}, - volume = {53}, - number = {22}, - pages = {13228--13237}, - publisher = {{American Chemical Society}}, - doi = {10.1021/ACS.EST.9B01445}, - urldate = {2021-09-20}, - abstract = {Despite the proliferation of control technologies, air pollution remains a major concern across the United States, suggesting the need for a paradigm shift in methods for mitigating emissions. Base...}, - file = {/Users/fabio/Zotero/storage/EL6CLG7F/full-text.pdf} -} - -@article{gopalakrishnanRoleVegetationMitigating2019, - title = {Role of {{Vegetation}} in {{Mitigating Air Emissions Across Industrial Sites}} in the {{US}}}, - author = {Gopalakrishnan, Varsha and Ziv, Guy and Bakshi, Bhavik R.}, - year = {2019}, - month = feb, - journal = {ACS Sustainable Chemistry \& Engineering}, - volume = {7}, - number = {4}, - pages = {3783--3791}, - publisher = {{American Chemical Society}}, - doi = {10.1021/ACSSUSCHEMENG.8B04360}, - urldate = {2021-09-20}, - abstract = {Despite wide adoption of pollution control technologies, industrial facilities emit about half the criteria air pollutants in the U.S. and contribute to poor air quality in many regions. Vegetation...}, - keywords = {Absolute sustainability,Air pollution,Ecosystem service,Nature-based solution,Point sources,Vegetation}, - file = {/Users/fabio/Zotero/storage/NT4X3ZLW/full-text.pdf} -} - -@inproceedings{Gordillo2014, - title = {Testbed for Evaluating Reference Models of {{Internet}} of {{Things}} ({{IoT}})}, - booktitle = {2014 {{IEEE}} Colomb. {{Conf}}. {{Commun}}. {{Comput}}.}, - author = {Gordillo, Rodolfo X. and Romero, Carlos G. and Abasolo, Sandy E. and Carrera, Michelle A.}, - year = {2014}, - month = jun, - pages = {1--6}, - publisher = {{IEEE}}, - doi = {10.1109/ColComCon.2014.6860426}, - isbn = {978-1-4799-4340-1} -} - -@article{Gordon2020, - title = {50 {{Years}} of Corporate and Organizational Foresight: {{Looking}} Back and Going Forward}, - author = {Gordon, Adam V. and Ramic, Mirza and Rohrbeck, Ren{\'e} and Spaniol, Matthew J.}, - year = {2020}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {154}, - pages = {119966}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119966} -} - -@article{gorjanEffectStearicAcid2020, - title = {Effect of Stearic Acid on Rheological Properties and Printability of Ethylene Vinyl Acetate Based Feedstocks for Fused Filament Fabrication of Alumina}, - author = {Gorjan, Lovro and Galusca, Cristina and Marwah, Sami and Sebastian, Tutu and Clemens, Frank}, - year = {2020}, - month = jun, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101391}, - publisher = {{Elsevier BV}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101391}, - urldate = {2020-07-20} -} - -@article{Gornet2002, - title = {Characterization of Selective Laser Sintering Materials to Determine Process Stability}, - author = {Gornet, T.J. and Davis, K.R. and Starr, T.L. and Mulloy, K.M.}, - year = {2002}, - journal = {Solid Freeform Fabrication Symposium}, - pages = {546--553}, - abstract = {The Selective Laser Sintering\texttrademark{} (SLS) process has proved to be an excellent method for prototyping functional parts out of engineering thermoplastics such as polyamides. However, the material undergoes physical and chemical changes due to repeated heating cycles in the SLS equipment. This causes variations in powder characteristics and performance in the SLS process. With the increased utilization of SLS for direct manufacturing it is necessary to develop a characterization and testing system that can determine powder fitness to ensure process stability and part quality. Current powder recycling methodologies use an average virgin-to-used powder mixture. In a new approach, a testing mechanism to deliver a numerical, measurable material characterization will be discussed. Experimental results of repeated reuse of material and its resulting physical effects on mechanical properties, shrinkage, and chemical tests will be presented. A definitive testing and measurement process control will be shown to improve process stability and thus part quality and consistency. Introduction}, - file = {/Users/fabio/Zotero/storage/EYV5QM33/Gornet et al. - 2002 - Characterization of selective laser sintering materials to determine process stability.pdf} -} - -@article{Gorrasi2002, - title = {Recycling Polyethylene from Automotive Fuel Tanks}, - author = {Gorrasi, Giuliana and Maio, Luciano Di and Vittoria, Vittoria and Acierno, Domenico}, - year = {2002}, - journal = {Journal of Applied Polymer Science}, - volume = {86}, - number = {2}, - pages = {347--351}, - issn = {00218995}, - doi = {10.1002/app.10967}, - abstract = {Polyethylene (PE) from postuse automotive fuel tanks is considered a valuable material for mechanical recycling, and we assessed its properties, paying particular attention to transport properties and processability. The characterization included the study of the sorption-desorption isotherms, the rheological analysis of the molten materials and their processability. In particular, we obtained, sorption-desorption isotherms using a model molecule (n-heptane) to simulate contact with the fuel. The measurements were carried out on films of PE blend for tanks and separately on the components of the blend. Rotational rheometry was carried out on scraps from used tanks and on virgin material for comparison. We performed some extrusion tests to evaluate the possibility of mechanical recycling of the postuse materials. In particular, we examined the melt-fracture incoming conditions by making use of a twin-screw extruder with a round die. Stress-strain measurements were carried out on films of virgin and used material, obtained with a press on a laboratory scale to evaluate the change of the mechanical properties of a manufacture obtained by reprocessing a polymer aged in contact with a mixture of liquids.}, - keywords = {Degradation,Polyethylene (PE),Recycling}, - file = {/Users/fabio/Zotero/storage/B2VI7AG7/Recycling polyethylene from automotive fuel tanks.pdf} -} - -@article{Gorton2021, - title = {What Determines Consumers' Use of Eco-Labels? {{Taking}} a Close Look at Label Trust}, - author = {Gorton, Matthew and Tocco, Barbara and Yeh, Ching Hua and Hartmann, Monika}, - year = {2021}, - journal = {Ecological Economics}, - volume = {189}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107173}, - urldate = {2021-09-16}, - abstract = {Eco-labels are informational cues that transform credence into quasi-search attributes but their influence on consumer decision making is often disappointing. This paper identifies antecedents of trust in, and use of, eco-labels, validating a theoretical model with data for four publicly managed organic labels (the EU green leaf and three national labels from France, Germany and Serbia). Drawing on a large dataset of European consumers, the analysis reveals that the effect of institutional trust on use of an eco-label is mediated by trust in that eco-label. Trust in an eco-label positively affects use of that eco-label. Knowledge of third-party certification positively affects trust in, and use of, an eco-label. The results suggest that for eco-label managers wishing to increase consumer uptake of their labels, communicating third-party verification as is a critically important informational cue for enhancing consumer trust.}, - keywords = {Consumer behavior,Eco-Labels,EU,Organic food,Trust}, - file = {/Users/fabio/Zotero/storage/7U2J2PNW/full-text.pdf} -} - -@article{gotharBringingGovernancePerspective2022, - title = {Bringing a Governance Perspective to Plastic Litter: {{A}} Structural Analysis of the {{German PET}} Industry}, - author = {Goth{\'a}r, Emma and Schanz, Heiner}, - year = {2022}, - month = may, - journal = {Sustainable Production and Consumption}, - volume = {31}, - pages = {630--641}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.03.019}, - urldate = {2022-04-11} -} - -@article{gouldCulturalEcosystemServices2019, - title = {Cultural Ecosystem Services and Decision-making: {{How}} Researchers Describe the Applications of Their Work}, - author = {Gould, Rachelle K. and Morse, Joshua W. and Adams, Alison B.}, - year = {2019}, - month = dec, - journal = {People and Nature}, - volume = {1}, - number = {4}, - pages = {457--475}, - publisher = {{Wiley}}, - issn = {2575-8314}, - doi = {10.1002/pan3.10044}, - urldate = {2021-04-23}, - abstract = {Cultural ecosystem services (CES) are some of the most difficult ecosystem services (ES) to characterize and connect to specific ecosystem processes. Given their connections to human emotion, deep meaning, fulfilment and motivation, they are also crucial for human well-being. Scholars have published hundreds of peer-reviewed articles addressing CES in myriad ways. In this systematic review, we analyse 232 peer-reviewed articles on CES and examine how these studies discuss the interaction between CES research and decision-making. We describe the primary ways that scholars have addressed the relationship between CES and decision-making, and we characterize each study with respect to how thoroughly its authors attend to the possible applications of their results. We find that 27\% of papers discuss connections to decision-making in general terms, 28\% discuss specific connections to decision-making, and the remainder mention decision-making links briefly or not at all. We also discuss patterns based on the particular CES studied (e.g. recreation, identity); methods used; change through time; and geographical location of authors and of study sites. We end with reflections on the current state of the interface between CES (and related concepts for approaching the non-material values associated with ecosystems) and decision-making, and we discuss future steps to increase connections between CES and decision-making. A free Plain Language Summary can be found within the Supporting Information of this article.}, - keywords = {human dimensions,non-material,policy,relational values,social dimensions of ecosystem services,social values,valuation,values}, - file = {/Users/fabio/Zotero/storage/3WSBFXTT/full-text.pdf} -} - -@article{gouletCharacterizingAlignmentsSociotechnical2021, - title = {Characterizing Alignments in Socio-Technical Transitions. {{Lessons}} from Agricultural Bio-Inputs in {{Brazil}}}, - author = {Goulet, Fr{\'e}d{\'e}ric}, - year = {2021}, - month = may, - journal = {Technology in Society}, - volume = {65}, - pages = {101580}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2021.101580}, - urldate = {2021-04-30} -} - -@article{Goupy2013a, - title = {Plans d 'exp\'eriences}, - author = {Goupy, Jacques}, - year = {2013}, - journal = {Techniques de l'ingenieur}, - volume = {33}, - number = {0}, - file = {/Users/fabio/Zotero/storage/LUQVC4HY/Plans d ’expériences.pdf} -} - -@article{GovindKharat2018, - title = {Fuzzy Multi-Criteria Decision Analysis for Environmentally Conscious Solid Waste Treatment and Disposal Technology Selection}, - author = {Govind Kharat, Manoj and Murthy, Shankar and Jaisingh Kamble, Sheetal and Raut, Rakesh D. and Kamble, Sachin S. and Govind Kharat, Mukesh}, - year = {2018}, - month = dec, - journal = {Technology in Society}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2018.12.005} -} - -@article{Gowthaman2018, - title = {A {{Review}} on {{Energy Harvesting Using 3D Printed Fabrics}} for {{Wearable Electronics}}}, - author = {Gowthaman, Swaminathan and Chidambaram, Gowri Shankar and Rao, Dilli Babu Govardhana and Subramya, Hemakumar Vyudhayagiri and Chandrasekhar, Udhayagiri}, - year = {2018}, - month = aug, - journal = {Journal of The Institution of Engineers (India): Series C}, - volume = {99}, - number = {4}, - pages = {435--447}, - issn = {2250-0545}, - doi = {10.1007/s40032-016-0267-4} -} - -@article{Goyanes2014, - title = {Fused-Filament {{3D}} Printing ({{3DP}}) for Fabrication of Tablets}, - author = {Goyanes, Alvaro and Buanz, Asma B.M. and Basit, Abdul W. and Gaisford, Simon}, - year = {2014}, - month = dec, - journal = {International Journal of Pharmaceutics}, - volume = {476}, - number = {1-2}, - pages = {88--92}, - issn = {03785173}, - doi = {10.1016/j.ijpharm.2014.09.044}, - abstract = {The use of fused-filament 3D printing (FF 3DP) to fabricate individual tablets is demonstrated. The technology permits the manufacture of tablets containing drug doses tailored to individual patients, or to fabrication of tablets with specific drug-release profiles. Commercially produced polyvinyl alcohol (PVA) filament was loaded with a model drug (fluorescein) by swelling of the polymer in ethanolic drug solution. A final drug-loading of 0.29\% w/w was achieved. Tablets of PVA/fluorescein (10 mm diameter) were printed using a 3D printer. It was found that changing the degree of infill percentage in the printer software varied the weight and volume of the printed tablets. The tablets were mechanically strong and no significant thermal degradation of the active occurred during printing. Dissolution tests were conducted in modified Hank's buffer. The results showed release profiles were dependent on the infill percentage used to print the tablet. The study indicates that FF 3DP has the potential to offer a new solution for fabricating personalized-dose medicines or unit dosage forms with controlled-release profiles. In addition, the low cost of FDM printers means the paradigm of extemporaneous or point-of-use manufacture of personalized-dose tablets is both feasible and attainable.}, - isbn = {1873-3476 (Electronic)\textbackslash r0378-5173 (Linking)}, - pmid = {25275937}, - keywords = {3D printing,Controlled-release,Fluorescein,Fused filament printing,PVA}, - file = {/Users/fabio/Zotero/storage/GESML5FT/Goyanes et al. - 2014 - Fused-filament 3D printing (3DP) for fabrication of tablets.pdf} -} - -@article{grabner-radkowitschDegrowthGlobalSouth2023, - title = {Degrowth and the {{Global South}}: {{The}} Twin Problem of Global Dependencies}, - shorttitle = {Degrowth and the {{Global South}}}, - author = {{Gr{\"a}bner-Radkowitsch}, Claudius and Strunk, Birte}, - year = {2023}, - month = nov, - journal = {Ecological Economics}, - volume = {213}, - pages = {107946}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107946}, - urldate = {2023-08-31}, - abstract = {We conduct a systematic literature review comprising both a quantitative and qualitative content analysis of the academic degrowth literature considering the Global South, and delineate substantive and methodological implications for future research. We find two main narratives: one stressing synergies, i.e. commonalities among Global South and Global North perspectives on degrowth, and another highlighting challenges, i.e. a constructive discussion of a range of challenges that emerge in this context. Our review reveals, inter alia, that the existing literature focuses mainly on the synergy narrative, and that there is a strong focus on theoretical and qualitative methodology. We argue that future research might want to put more emphasis on the investigation of structural dependencies between the North and South, using a broader methodological toolkit than so far. Only then one can effectively address what we call the `twin problem of global dependencies': the fact that within the current institutional framework, these dependencies are a motivation for and a potential obstacle to degrowth at the same time.}, - keywords = {Decolonization,Degrowth,Development,Global South,Post-Development,Structural dependencies}, - file = {/Users/fabio/Zotero/storage/Y6UGKUWV/Gräbner-Radkowitsch_Strunk_2023_Degrowth and the Global South.pdf;/Users/fabio/Zotero/storage/SAW8QCR9/S0921800923002094.html} -} - -@article{grafstromBreakingCircularEconomy2021, - title = {Breaking Circular Economy Barriers}, - author = {Grafstr{\"o}m, Jonas and Aasma, Siri}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {292}, - pages = {126002}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126002}, - urldate = {2021-02-14}, - abstract = {Despite high estimated gains of a circular economy implementation, progress on the macro, meso and micro level is sluggish. The purpose of this paper is to examine, from a theoretical economics perspective, how four barriers \textendash{} technological, market, institutional and cultural \textendash{} can prevent the implementation of a circular economy. The barriers that currently hinder a circular economy from developing are identified and a mapping of these barriers is performed to understand how they are interdependent and entangled. The conclusion is that even small barriers could stop the emergence of a circular economy. Even though a circular economy is different from our traditional ``linear'' economy, the theoretical analysis in this paper gives no reason to believe that a circular economy will not follow the same rules as a traditional economy. There will be property rights, rule of law and price signals guiding the economy. If some of the essential parts of a market are lacking, a weaker circular economy than otherwise possible will materialize.}, - keywords = {Barriers,Circular economy,Markets,Recycling,Sustainability} -} - -@article{Grand-est2013, - title = {Icesl : A {{Gpu Accelerated Csg Modeler}}}, - author = {{Grand-est}, Loria Inria Nancy}, - year = {2013}, - journal = {Proceedings of AEFA'13, 18th European Forum on Additive Manufacturing}, - number = {June}, - pages = {25--27}, - keywords = {a,buffer,csg,gpu accelerated,slicing,solid modeling,tool path}, - file = {/Users/fabio/Zotero/storage/KCI2PQCT/ICESL- A GPU ACCELERATED CSG MODELER AND SLICER.pdf} -} - -@article{Granstrand2019, - title = {Innovation Ecosystems: {{A}} Conceptual Review and a New Definition}, - author = {Granstrand, Ove and Holgersson, Marcus}, - year = {2019}, - month = nov, - journal = {Technovation}, - pages = {102098}, - issn = {01664972}, - doi = {10.1016/j.technovation.2019.102098} -} - -@article{grantResourcebasedViewProductivity2022, - title = {Resource-Based View of the {{Productivity Paradox}}}, - author = {Grant, Delvin and Yeo, Benjamin}, - year = {2022}, - month = feb, - journal = {https://doi.org/10.1080/09537325.2022.2042509}, - pages = {1--16}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2022.2042509}, - urldate = {2022-03-13}, - abstract = {The Productivity Paradox can be explained by technology capability. Resource Based Theory (RBT) is used to analyse how technology capability moderates technology investments, technology infrastruct...}, - keywords = {human capital,Productivity Paradox,Resource Based Theory,technology investment}, - file = {/Users/fabio/Zotero/storage/6I7GFNIH/full-text.pdf} -} - -@article{grebitusSustainableBottledWater2020, - title = {Sustainable Bottled Water: {{How}} Nudging and {{Internet Search}} Affect Consumers' Choices}, - author = {Grebitus, Carola and Roscoe, Rod D. and Van Loo, Ellen J. and Kula, Irfan}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {267}, - pages = {121930}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121930}, - urldate = {2020-05-28}, - abstract = {This study examined differences in consumer preferences and willingness to pay for sustainable bottled water based on pro-environmental guidance, Internet information search, and research setting (i.e., laboratory or online). Specifically, we investigated willingness to pay for bottled water produced with plant-based plastics and post-consumer waste plastics. Insight into willingness to pay (i.e., preferences and acceptance) for novel plastics is valuable given the potential impact of such materials regarding cleaner production of food and non-food products. Results from mixed logit models showed that searching for information increased the likelihood that consumers would choose sustainable plastic water bottles over less sustainable options, and the effect was magnified when consumers were primed to make environmentally friendly choices. Findings also revealed a considerable amount of preference heterogeneity with regard to the type of water product or type of plastic used to manufacture the bottles. Similar results were reflected in the willingness to pay. In addition, preference and willingness to pay were generally higher in the lab setting compared to the online setting. Overall, pro-environmental guidance can nudge individuals towards making more sustainable choices even if it comes at a higher cost. For stakeholders and policy makers with interests in the beverage industry, observed findings can inform recommendations for facilitating more sustainable consumer behavior.} -} - -@article{greenEffectsConventionalBiodegradable2016, - title = {Effects of Conventional and Biodegradable Microplastics on a Marine Ecosystem Engineer ({{Arenicola}} Marina) and Sediment Nutrient Cycling}, - author = {Green, Dannielle Senga and Boots, Bas and Sigwart, Julia and Jiang, Shan and Rocha, Carlos}, - year = {2016}, - month = jan, - journal = {Environmental Pollution}, - volume = {208}, - pages = {426--434}, - publisher = {{Elsevier}}, - issn = {0269-7491}, - doi = {10.1016/J.ENVPOL.2015.10.010}, - urldate = {2022-01-13}, - abstract = {Effects of microplastic pollution on benthic organisms and ecosystem services provided by sedimentary habitats are largely unknown. An outdoor mesocosm experiment was done to realistically assess the effects of three different types of microplastic pollution (one biodegradable type; polylactic acid and two conventional types; polyethylene and polyvinylchloride) at increasing concentrations (0.02, 0.2 and 2\% of wet sediment weight) on the health and biological activity of lugworms, Arenicola marina (Linnaeus, 1758), and on nitrogen cycling and primary productivity of the sediment they inhabit. After 31 days, A. marina produced less casts in sediments containing microplastics. Metabolic rates of A. marina increased, while microalgal biomass decreased at high concentrations, compared to sediments with low concentrations or without microplastics. Responses were strongest to polyvinylchloride, emphasising that different materials may have differential effects. Each material needs to be carefully evaluated in order to assess their risks as microplastic pollution. Overall, both conventional and biodegradable microplastics in sandy sediments can affect the health and behaviour of lugworms and directly or indirectly reduce primary productivity of these habitats.}, - pmid = {26552519}, - keywords = {Algae,Asymmetrical ANOVA,Ecosystem services,Marine litter,Plastic debris} -} - -@article{greenwoodCombiningInsightsEnvironmental2021, - ids = {greenwood2021a}, - title = {Combining Insights from the Environmental and Behavioural Sciences to Understand What Is Required to Make Reusable Packaging Mainstream}, - author = {Greenwood, Sarah and Walker, Stuart and Baird, Harriet M. and Parsons, Rorie and Mehl, Seth and Webb, Thomas L. and Slark, Andrew T. and Ryan, Anthony J. and Rothman, Rachael H.}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier BV}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.03.022}, - urldate = {2021-04-29}, - abstract = {The introduction of reusable packaging systems (both refill and return) has the potential to significantly reduce waste from single-use plastic packaging. However, for these schemes to be successful, both the environmental impact and the willingness of consumers to engage with such systems need to be carefully considered. This paper combines and discusses two complementary studies: (i) a life cycle assessment comparing the environmental impacts of single-use, refillable, and returnable containers for a takeaway meal, and (ii) a large online survey of UK adults exploring what types of product and packaging consumers are willing to reuse, how, and why. The findings of the life cycle assessment indicate that reusable containers outperform single-use plastic containers on most measures of environmental impact. The survey found that given the choice of disposal, reuse or recycling, that recycling is the preferred method of dealing with packaging once empty in the UK, and that people's decisions with regards to what types of packaging they are willing to reuse are largely driven by the aspects of the packaging itself (e.g., material and type) rather than the nature of the product inside of the packaging (e.g., state of matter of the contents). The survey also showed that people were more willing to engage in reuse systems with which they were already familiar. Additionally the language used to describe these schemes and the term `reuse' needs to be considered. Combined, these factors can be used to determine the best packaging reuse system for a given product and situation.}, - file = {/Users/fabio/Zotero/storage/XFLILDMB/full-text.pdf} -} - -@article{Greer2021, - title = {The {{Waste-Resource Paradox}}: {{Practical}} Dilemmas and Societal Implications in the Transition to a Circular Economy}, - author = {Greer, Rachel and {von Wirth}, Timo and Loorbach, Derk}, - year = {2021}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {303}, - pages = {126831}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126831}, - urldate = {2021-04-23}, - abstract = {Little research has been published on emotional responses evoked by completely new, innovative food products. The objectives of the present study were 1) to assess the emotional response to new products (fruit and vegetable smoothies in a drink pouch) in two different scenarios: looking at the smoothie pouch, or tasting the smoothie with the smoothie pouch alongside; 2) to compare the information obtained when the participants use photographs or use words to express emotions. In the Pack-alone scenario, similar emotional spaces and sample configurations were obtained with both images and words. In the Pack-and-tasting scenario, the richness of the emotional response increased when using images. In both scenarios, the participants used a greater number of negative emotions when these were presented as images rather than as words. This could be considered an advantage, as it enables some negative emotional loads to be portrayed. The present results also demonstrate that evaluating the emotional response allows effective discrimination between samples with similar overall liking scores.}, - file = {/Users/fabio/Zotero/storage/5EVI37N2/full-text.pdf} -} - -@article{Gregoire2016, - title = {Exploring Various Approaches of Social Innovation: A Francophone Literature Review and a Proposal of Innovation Typology}, - author = {Gregoire, Maud}, - year = {2016}, - month = dec, - volume = {17}, - number = {6}, - pages = {45--71}, - publisher = {{Universidade Presbiteriana Mackenzie}}, - issn = {1678-6971}, - doi = {10.1590/1678-69712016/administracao.v17n6p45-71}, - abstract = {ABSTRACT Purpose: The purpose of this paper is to clarify the multiple different approaches of social innovation, focusing on francophone literature. Originality/gap/relevance/implications: We propose an in-depth literature review that questions the meaning of the adjective "social" when used by authors to qualify an innovation, that highlights the different approaches of the concept, their relations to each other and their limits, and that illustrates these approaches with concrete examples. Finally, we build on these materials to propose a new innovation typology that wholly integrates social innovation. Key methodological aspects: The literature review is based on a selection of 25 papers in French - the mother language of the author - which were collected and analyzed using the "theoretical saturation point" method: we stopped the review when we felt there was no new crucial element in the next articles read, that is, when it seemed that a "saturation point" of information had been reached about theories on social innovation. Summary of key results: The definition of social innovation as new answers provided to unsatisfied or badly-satisfied social demands seems to prevail in the literature. It can be divided into three sub-approaches: the public policies, the social entrepreneurship, and the participatory dynamics, which strikes us as the most interesting, without excluding the others. Key considerations/conclusions: We propose a new innovation typology, which presents social innovation's relations to other types of innovation. We conclude with some considerations about social innovation context of emergence, and about its ambiguous position in the neoliberal system.RESUMEN Objetivo: El objetivo de este art\'iculo es clarificar las diversas visiones de la innovaci\'on social, concentr\'andose en la literatura franc\'ofona. Originalidad/laguna/relevancia/implicaciones: Proponemos un an\'alisis a fondo de la literatura, que cuestiona el significado del adjetivo "social" cuando est\'a utilizado por los autores para calificar una innovaci\'on, que destaca los diferentes enfoques del concepto, sus relaciones entre s\'i y sus l\'imites, y que los ilustra con ejemplos concretos. Por fin, utilizamos este material para sugerir una nueva tipolog\'ia de la innovaci\'on social, que toma plenamente en cuenta la innovaci\'on social. Principales aspectos metodol\'ogicos: El an\'alisis de la literatura est\'a basado sobre 25 art\'iculos en franc\'es - el idioma materno de la autora - que fueron recogidos utilizando el m\'etodo del "punto de saturaci\'on teor\'etico": paramos el recogiendo cuando nos pareci\'o que no hab\'ia ningun elemento in\'edito en los nuevos art\'iculos le\'idos, es decir, cuando llegamos a un "punto de saturaci\'on" de informaci\'on respecto a las teor\'ias sobre la innovaci\'on social. S\'intesis de los principales resultados: La definici\'on de la innovaci\'on social como nuevas respuestas a demandas sociales insatisfechas o no-satisfechas parece prevalecer en la literatura franc\'ofona. Puede ser divida en tres sub-visiones: la visi\'on basada en las pol\'iticas p\'ublicas, la visi\'on basada en el empresariado social, y la visi\'on basada en las din\'amicas participativas, que nos parece la m\'as interesante, sin excluir las otras. Principales consideraciones/conclusiones: Proponemos una nueva tipolog\'ia de la innovaci\'on social, que presenta sus relaciones con otros tipos de innovaci\'on. Concluimos con algunas consideraciones sobre el contexto de emergencia de la innovaci\'on social y sobre su posici\'on ambigua con el sistema neoliberal.RESUMO Objetivo: O objetivo deste artigo \'e esclarecer as m\'ultiplas abordagens de inova\c{c}\~ao social, com foco sobre a literatura franc\'ofona. Originalidade/lacuna/relev\^ancia/implica\c{c}\~oes: Ser\'a oferecida uma revis\~ao ampla da literatura que ponha em d\'uvida o significado do adjetivo "social" quando usado pelos autores para descrever uma inova\c{c}\~ao, destacando as diferentes abordagens do conceito, os relacionamentos de umas entre outras e os seus limites e ilustrando estas abordagens com exemplos concretos. Principais aspectos metodol\'ogicos: A an\'alise da literatura se baseia em uma sele\c{c}\~ao de vinte e cinco artigos em franc\^es - a l\'ingua materna do autor - recolhidos e analisados atrav\'es do m\'etodo do "ponto de satura\c{c}\~ao te\'orica". Conclu\'imos nossa investiga\c{c}\~ao quando aparecia que n\~ao havia mais elementos in\'editos e cruciais para os artigos novamente lidos, ou seja, quando apareceu que um "ponto de satura\c{c}\~ao" finalmente foi atingido sobre as teorias da inova\c{c}\~ao social. S\'intese dos principais resultados: A defini\c{c}\~ao da inova\c{c}\~ao social, como novas solu\c{c}\~oes para as exig\^encias n\~ao ou mal atendidas, parece predominar na literatura. Ela pode ser subdividida em tr\^es: a abordagem pelas pol\'iticas p\'ublicas, a abordagem pelo esp\'irito empresarial social e a abordagem pelo desenvolvimento participativo que parece ser, neste caso, a mais interessante, sem excluir as outras. Principais considera\c{c}\~oes/conclus\~oes: Prop\~oe-se uma nova tipologia de inova\c{c}\~ao que mostra a rela\c{c}\~ao entre a inova\c{c}\~ao social com outros tipos de inova\c{c}\~oes. A t\'itulo de conclus\~ao, algumas considera\c{c}\~oes s\~ao apresentadas sobre o contexto de emerg\^encia da inova\c{c}\~ao social e da sua posi\c{c}\~ao amb\'igua dentro do sistema neoliberal.}, - file = {/Users/fabio/Zotero/storage/BXYV65XY/Gregoire_2016_Exploring various approaches of social innovation.pdf} -} - -@article{Grigore2017, - title = {Methods of Recycling, Properties and Applications of Recycled Thermoplastic Polymers}, - author = {Grigore, M{\u a}d{\u a}lina Elena}, - year = {2017}, - month = nov, - journal = {Recycling}, - volume = {2}, - number = {4}, - pages = {24}, - publisher = {{MDPI AG}}, - issn = {23134321}, - doi = {10.3390/recycling2040024}, - urldate = {2020-03-12}, - abstract = {This study aims to provide an updated survey of the main thermoplastic polymers in order to obtain recyclable materials for various industrial and indoor applications. The synthesis approach significantly impacts the properties of such materials and these properties in turn have a significant impact on their applications. Due to the ideal properties of the thermoplastic polymers such as corrosion resistance, low density or user-friendly design, the production of plastics has increased markedly over the last 60 years, becoming more used than aluminum or other metals. Also, recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today.}, - keywords = {Chemical recycling,Energy recovery,Environmental impacts,Plastics recycling}, - file = {/Users/fabio/Zotero/storage/ZIIEZBG4/full-text.pdf} -} - -@inproceedings{Grimal2020, - title = {Case Study: {{Located}} Pedagogical Situations to Improve Global Sustainable Skills in Engineering Education and Universities}, - booktitle = {Procedia {{CIRP}}}, - author = {Grimal, Lou and Marty, Pauline and Perez, Santiago and Troussier, Nad{\`e}ge and Perpignan, Catherine and Reyes, Tatiana}, - year = {2020}, - month = jan, - volume = {90}, - pages = {766--771}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2020.02.136}, - urldate = {2021-05-04}, - abstract = {While the importance of moving towards sustainability rises up in public, the presence of strategies to achieve it, in engineering academic frameworks, hardly increase. In particular, tackling environmental, social and technical aspects in conjunct ways remain difficult to teach in engineering education. The goal of this paper is to offer new engineering pedagogical strategies in order to address sustainable issues with a more global and integrated vision. An experiment of a pedagogical situation anchored into society will be presented and analysed thanks to sustainable skills defined by different institutions.}, - keywords = {Design for sustainability,Ecodesign,Education,Experiment,Participative science,Territorial}, - file = {/Users/fabio/Zotero/storage/6EVW3UM9/full-text.pdf} -} - -@article{gritschHistoricaltechnicalAnalysisPackaging2023, - title = {A Historical-Technical Analysis of Packaging Waste Flows in {{Vienna}}}, - author = {Gritsch, Lea and Lederer, Jakob}, - year = {2023}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {194}, - pages = {106975}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.106975}, - urldate = {2023-05-11}, - abstract = {Urban waste management plays an important role in providing secondary raw materials for packaging waste recycling. To assess measures for this provision, material flows of packaging waste for 2006\textendash 2020 in Vienna were modeled and evaluated by the separate collection rate and sorting rate. Results showed increasing separate collection rates for the years 2006-2020 for plastic bottles (20\%-35\%), aluminum beverage packaging (10\%-22\%), and beverage cartons (10\%-18\%) achieved by commingled collection and more collection points. Values for other aluminum (6\%-5\%) and ferrous metal packaging (18\%-16\%), however, decreased. Glass packaging increased slightly (53\%-55\%) and paper packaging remained constant (56\%). The sorting rate of metal packaging increased significantly due to bottom ash sorting. To increase the provision of secondary raw materials, better communication with consumers and the improvement of technical sorting of mixed waste and bottom ash should be implemented. Door-to-door collection of beverage cartons, metals, and plastics should be carefully tested and evaluated before implementation.}, - langid = {english}, - keywords = {Circular economy,Material flow analysis,Packaging waste,Separate collection rate,Sorting rate}, - file = {/Users/fabio/Zotero/storage/XY34ABHB/Gritsch y Lederer - 2023 - A historical-technical analysis of packaging waste.pdf;/Users/fabio/Zotero/storage/RT7QPHWH/S0921344923001118.html} -} - -@article{grodzinska-jurczakContradictoryComplementaryStakeholders2022, - title = {Contradictory or Complementary? {{Stakeholders}}' Perceptions of a Circular Economy for Single-Use Plastics}, - author = {{Grodzi{\'n}ska-Jurczak}, Ma{\l}gorzata and Krawczyk, Aleksandra and Akhshik, Arash and Dedyk, Zuzanna and Strzelecka, Marianna}, - year = {2022}, - month = apr, - journal = {Waste Management}, - volume = {142}, - pages = {1--8}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.01.036}, - urldate = {2022-03-07}, - abstract = {Single-use plastics (SUPs) represent one of the largest and rapidly growing segments of the plastics industry. The strategies to mitigate plastic hazards has become more difficult during the COVID-19 pandemic; SUPs have gained positive health-related attributes among consumers and remain the preferred packaging material. One of the most promising strategies to tackle the SUPs problem is a worldwide transition towards a circular economy (CE) for plastics. Here, we propose the reconceptualization of a CE for SUPs based on an analysis of the perceptions of stakeholders and the public from social, psychological, and communication-related perspectives. Our study utilized focus groups with primary and secondary stakeholders \textendash{} differing in their power regarding SUP CE governance \textendash{} and general consumers to identify their perceptions regarding challenges to and solutions for a CE for SUPs, thereby unveiling the potential for trustworthy knowledge co-creation. Our findings demonstrate that trustworthy knowledge-in-action is the primary driver for achieving sustainability transitions across stakeholders and suggest a significant discrepancy between young consumers and producers. Furthermore, we argue that exploring diversified approaches to knowledge co-creation necessitates various disciplinary entry points, ranging from different perspectives (challenges vs. solutions, individual vs. systemic levels, diversity in agenda-setting) to innovative attempts to understand knowledge production behaviour, especially for policymakers. Perceiving scientists as science communicators who can effectively inform involved stakeholders and general consumers and engage them in SUP crisis mitigation actions, the results of our study (jointly created manifest followed by a series of posters) are subject to further research and proposals for policy decisions.}, - pmid = {35151014}, - keywords = {Circular economy,Climate change,COVID-19,Knowledge brokerage,Single-use plastics (SUPs),Stakeholders} -} - -@article{Grodzinsky2006, - title = {Commons-Based {{Peer Production}} and {{Virtue}}*}, - author = {Grodzinsky, Francis and Harman, Gilbert and Kateb, George and Benkler, Yochai}, - year = {2006}, - volume = {14}, - number = {4}, - pages = {394--419}, - file = {/Users/fabio/Zotero/storage/P9338X4G/Commons-based Peer Production and Virtue.pdf} -} - -@article{Groh2019, - title = {Overview of Known Plastic Packaging-Associated Chemicals and Their Hazards}, - author = {Groh, Ksenia J. and Backhaus, Thomas and {Carney-Almroth}, Bethanie and Geueke, Birgit and Inostroza, Pedro A. and Lennquist, Anna and Leslie, Heather A. and Maffini, Maricel and Slunge, Daniel and Trasande, Leonardo and Warhurst, A. Michael and Muncke, Jane}, - year = {2019}, - month = feb, - journal = {Science of The Total Environment}, - volume = {651}, - pages = {3253--3268}, - issn = {00489697}, - doi = {10.1016/j.scitotenv.2018.10.015} -} - -@article{grolleauChangingWorldWords2022, - title = {Changing the World with Words? {{Euphemisms}} in Climate Change Issues}, - author = {Grolleau, Gilles and Mzoughi, Naoufel and Peterson, Deborah and Tendero, Marjorie}, - year = {2022}, - month = mar, - journal = {Ecological Economics}, - volume = {193}, - pages = {107307}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107307}, - urldate = {2021-12-10} -} - -@article{grothFiveSimpleTools2021, - title = {Five Simple Tools for Stochastic Lattice Creation}, - author = {Groth, Jan-Hendrik and Anderson, Caelan and Magnini, Mirco and Tuck, Christopher and Clare, Adam}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - pages = {102488}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102488}, - urldate = {2021-11-30} -} - -@article{grunewaldLessonsLearnedImplementing2021, - title = {Lessons Learned from Implementing the Ecosystem Services Concept in Urban Planning}, - author = {Grunewald, K. and Bastian, O. and Louda, J. and Arcidiacono, A. and Brzoska, P. and Bue, M. and Cetin, N. I. and Dworczyk, C. and Dubova, L. and Fitch, A. and Jones, L. and La Rosa, D. and Mascarenhas, A. and Ronchi, S. and Schlaepfer, M. A. and Sikorska, D. and Tezer, A.}, - year = {2021}, - month = jun, - journal = {Ecosystem Services}, - volume = {49}, - pages = {101273}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101273}, - urldate = {2021-04-29}, - abstract = {This paper presents a summary of lessons learned from implementing the ecosystem services (ES) approach into urban planning practice in different European urban settings. We summarise a survey co-created with, and presented to, researchers and end-users in city administrations from ten European case study cities. To complement the expert analysis, 14 semi-structured interviews were conducted among stakeholders to assess the use of ES in practice in urban settings. There was strong agreement between scientists and practitioners on both the opportunities and the barriers to uptake the ES concept in urban planning practice. Key agreements were that the ES concept supports decision-making as well as spatial planning, it is most useful as a communication tool, and monetarisation and public pressure can be considered as promoting factors. Barriers are lack of evidence including case studies, standardised methods and criteria to evaluate nature and its benefits, lack of legislations/reform, limited capacity and reluctance to apply ES in planning practice, and limited public involvement. On individual aspects, such as the monetarisation of ES, views differed both among the scientists and the practitioners. Derived from our investigations we summarize in which circumstances the ES concept is most relevant and useful for urban planners and decision-makers.}, - keywords = {Decision-making,Green-blue infrastructure,Practitioners' perspective,Scientists' perspective,Urban nature} -} - -@article{Gryszkiewicz2017, - title = {Innovation Labs: Leveraging Openness for Radical Innovation?}, - author = {Gryszkiewicz, Lidia and Lykourentzou, Ioanna and Toivonen, Tuukka}, - year = {2017}, - month = mar, - journal = {Journal of Innovation Management}, - volume = {4}, - number = {4}, - pages = {68--97}, - issn = {2183-0606}, - doi = {10.24840/2183-0606_004.004_0006}, - abstract = {A growing range of public, private and civic organisations, from Unicef through Nesta to NHS, now run units known as ``innovation labs''. The hopeful assumption they share is that labs, by building on openness among other features, can generate promising solutions to grand challenges of systemic nature. Despite their seeming proliferation and popularisation, the underlying innovation principles embodied by labs have, however, received scant academic attention. This is a missed opportunity, because innovation labs appear to leverage openness for radical innovation in an unusual fashion. Indeed, in this exploratory paper we draw on original interview data and online self-descriptions to illustrate that, beyond convening ``uncommon partners'' across organisational boundaries, labs apply the principle of openness throughout the innovation process, including the experimentation and development phases. While the emergence of labs clearly forms part of a broader trend towards openness, we show how it transcends established conceptualisations of open innovation (Chesbrough, 2006), open science (David, 1998) or open government (Janssen et al., 2012).}, - keywords = {collaboration,government,innovation hubs,innovation labs,open,open innovation,openness}, - file = {/Users/fabio/Zotero/storage/IHES2EV2/Innovation Labs- Leveraging Openness for Radical Innovation.pdf} -} - -@article{Gu2002, - title = {Fabrication of {{Biomedical Prototypes}} with {{Locally Controlled Properties Using FDM}}}, - author = {Gu, P. and Li, L.}, - year = {2002}, - month = jan, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {51}, - number = {1}, - pages = {181--184}, - issn = {00078506}, - doi = {10.1016/S0007-8506(07)61495-4}, - keywords = {biomedical structure,composites,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/E8BZTVFB/Fabrication of Biomedical Prototypes with Locally Controlled Properties Using FDM.pdf} -} - -@article{Gu2016, - title = {Performance Evaluation for Composites Based on Recycled Polypropylene Using Principal Component Analysis and Cluster Analysis}, - author = {Gu, Fu and Hall, Philip and Miles, Nicholas J.}, - year = {2016}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {115}, - pages = {343--353}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2015.12.062}, - urldate = {2021-01-15}, - abstract = {It is more economic and environmental-friendly to use recycled plastics in manufacturing, especially under the context of circular economy. Since there are many which formulae exist which improve the different properties of recycled plastics, there is a need to develop decision support tools for evaluating the materials based on multiple properties. In this study, principal component analysis (PCA) was used as a decision support tool to evaluate the performance of plastic composites based on multiple properties. Cluster analysis (CA) was used for classify those properties. The base materials were polypropylene (PP), including a virgin PP (vPP) which is currently used in automobile industry and recycled PP (rPP) recovered from mixed scrap plastics. Two primary fillers were talcum powder (talc) and glass fibre (GF) which are commonly used in the composites for manufacturing industry, maleic anhydride grafted polypropylene (MAPP) was used as compatibiliser. Two vPP-based industrial composites for making automobile parts were used as comparatives. The materials were blended using a twin screw extruder, pelletized, and injected moulded into ISO standard sample specimens for ISO standard mechanical tests. The properties tested were tensile strength, yield strength, flexural modulus, flexural strength, and impact strength. The experimental results revealed that both virgin and recycled plastics are improved by the addition of fillers, and some properties of recycled plastics are better than those of industrial composites. Based on the experimental results, the multiple tested mechanical properties and the composites were classified by CA. Evaluation was performed by PCA, and the scores of some rPP based composites are higher than vPP based composites and industrial materials.}, - keywords = {Cluster analysis,Decision support tool,Performance cost ratio,Polypropylene,Principal component analysis,Quick evaluation} -} - -@article{Gu2019, - title = {The Re-Usability of Heat-Exposed Poly (Ethylene Terephthalate) Powder for Laser Sintering}, - author = {Gu, Hao and Bashir, Zahir and Yang, Lanti}, - year = {2019}, - month = aug, - journal = {Additive Manufacturing}, - volume = {28}, - pages = {194--204}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.05.004} -} - -@article{Gu2020, - title = {Environmental Performance Analysis on Resource Multiple-Life-Cycle Recycling System: {{Evidence}} from Waste Pet Bottles in {{China}}}, - author = {Gu, Yifan and Zhou, Guangli and Wu, Yufeng and Xu, Ming and Chang, Tao and Gong, Yu and Zuo, Tieyong}, - year = {2020}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {158}, - pages = {104821}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104821}, - urldate = {2020-05-08}, - abstract = {Resource multiple-life-cycle (MLC) recycling process is a complex system with closed-loop and open-loop recycling interwoven with each other, which has recieved vast attention in recent years. Resource MLC recycling has a cascading effect, one recycling process will have an impact on the next cycle, and ultimately affect the overall environmental performance of the social system. Policies will affect the flow of resource MLC recycling. How to maximize the emission reduction effect of resource MLC recycling through policy design is still under exploration. Employing MLC recycling of China's waste PET bottles as an example, this paper constructs an environmental performance accounting method based on MLCA, and simulates the overall impact of various policies such as implementing deposit system, promoting recycled materials, strenghtening environmental regulation and enhancing regeneration technology on the recycling system of PET bottles. The combined policy scenario is constructed by selecting advantageous strategies that can effectively give full play to the strengths of each policy scenario. From 2020 to 2040, the environmental performance loss value of the combined policy scenario will be 52.52\% of the baseline scenario without policy support, and the cumulative emission reductions of wastewater, waste gas and solid waste will be 0.98, 3.61 and 341.39 million tonnes respectively, which can help China to achieve emission reduction targets set out in each five-year plan. In order to realize the combined policy scenario, it is suggested that the life cycle assessment (LCA) should be replaced by multiple life cycle assessment (MLCA), the effect of resource saving and environmental emission reduction in the recycling process should be accounted as accurately as possible, a top-level management organization of natural resources across multiple departments should be established as soon as possible, with the goal of maximizing the comprehensive environmental and economic benefits of MLC processes.}, - keywords = {Circular economy,Environmental performance,Multiple life cycle assessment (MLCA),Multiple-life-cycle (MLC),Policy simulation,Polyethylene terephalate (PET) bottle} -} - -@article{guandaliniAssessingImplementationSustainable2019, - title = {Assessing the Implementation of {{Sustainable Development Goals}} through Switching Cost}, - author = {Guandalini, Ilaria and Sun, Wenxian and Zhou, Li}, - year = {2019}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {232}, - pages = {1430--1441}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.033}, - urldate = {2020-06-18}, - abstract = {An increasing number of corporations are adapting their strategies to include projects aimed at achieving United Nations' Sustainable Development Goals. Nonetheless, the implementation of these projects revives a fifty-year old question about the impact of sustainable activity on corporate financial performance and sustainability outcomes. This paper proposes the analysis of the Switching Costs of sustainable projects as a way to identify areas of improvement for corporate strategies, thus responding to the urgent need for models and assessment tools able to achieve financial and sustainability objectives as claimed by both practice and academia. A conceptual framework relating the Switching Costs of sustainable projects to sustainability and corporate financial performance has been developed and applied in this research to a case-study company, Walmart Mexico and Central America. This paper addresses the challenge of recognising, collecting and gauging the effect of the changes, particularly those of an intangible nature, generated by the sustainable projects.} -} - -@article{Gudowsky2019, - title = {Bridging Epistemologies\textemdash{{Identifying}} Uniqueness of Lay and Expert Knowledge for Agenda Setting}, - author = {Gudowsky, Niklas and Rosa, Aaron}, - year = {2019}, - month = may, - journal = {Futures}, - volume = {109}, - pages = {24--38}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.04.003}, - urldate = {2020-05-10}, - abstract = {Numerous foresight studies have been commissioned to address future R\&I policies in the EU, spanning a variety of methodological approaches and scales of participation. Drawing out the discrepancy in content between expert- as well as citizen-based foresight studies, this article demonstrates that significant divisions exist between the resulting products with regard to informing policy creation. The Societal Challenges as declared by the European Commission provide an organizing framework for locating unique expert and citizen research topics within the context of knowledge generation towards specific policy ends. We link differences to the epistemological centers that organize both professional foresight research and citizen-based foresight projects. While professional foresight research institutions are more detailed in their examination of specificities concerning future-relevant factors, trends, and emerging issues, distinct qualitative differences emerge within citizen-based foresight initiatives with regard to contextualizing the possible impacts of future research and innovation projects.}, - keywords = {Citizen engagement,Comparison,Expert\textendash lay knowledge divide,Participatory foresight,Research and innovation agenda setting} -} - -@article{guePredictingWasteManagement2022, - title = {Predicting Waste Management System Performance from City and Country Attributes}, - author = {Gue, Ivan Henderson V. and Lopez, Neil Stephen A. and Chiu, Anthony S. F. and Ubando, Aristotle T. and Tan, Raymond R.}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {366}, - pages = {132951}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.132951}, - urldate = {2022-08-05}, - abstract = {Supporting good waste management practices is crucial for the sustainable development of cities. Transforming the practices of cities is a complex problem that requires understanding their societal, technological, and economic processes. Machine learning is a branch of artificial intelligence techniques that generates models from patterns in data. Many of these models are difficult to present to city planners because of poor transparency. To provide insights for policymaking, interpretable machine learning models between city attributes and waste management performance are needed. Country attributes have a top-down influence on the sustainability of cities. Their inclusion provides deeper insights in addition to city-wide scope analysis. This work develops a rule-based machine learning model in the impact of city and country attributes on waste management. Rough set-based machine learning is used to generate models consisting of if-then rules with data from 100 cities in 41 countries. The results identify local governance, employment, and technological research as core attributes that influence sustainable waste management. The rough set-based machine learning models attained binary classification accuracies of 89\%\textendash 91\%. The implications on waste management and Circular Economy transition policies are discussed in this study.}, - langid = {english}, - keywords = {Artificial intelligence,Circular urban economies,Decision support system,Interpretable model,Sustainable development,Urban metabolism}, - file = {/Users/fabio/Zotero/storage/625MWGRX/S0959652622025434.html} -} - -@article{Guerry, - title = {Natural Capital and Ecosystem Services Informing Decisions: {{From}} Promise to Practice}, - author = {Guerry, Anne D and Polasky, Stephen and Lubchenco, Jane and {Chaplin-Kramer}, Rebecca and Daily, Gretchen C and Griffin, Robert and Ruckelshaus, Mary and Bateman, Ian J and Duraiappah, Anantha and Elmqvist, Thomas and Feldman, Marcus W and Folke, Carl and Hoekstra, Jon and Kareiva, Peter M and Keeler, Bonnie L and Li, Shuzhuo and McKenzie, Emily and Ouyang, Zhiyun and Reyers, Belinda and Ricketts, Taylor H and Rockstr{\"o}m, Johan and Tallis, Heather and Vira, Bhaskar}, - year = {2015}, - journal = {Proceedings of the National Academy of Sciences of the United States of America}, - volume = {112}, - number = {24}, - pages = {7348--7355}, - issn = {10916490}, - doi = {10.1073/pnas.1503751112}, - urldate = {2021-08-31}, - abstract = {The central challenge of the 21st century is to develop economic, social, and governance systems capable of ending poverty and achieving sustainable levels of population and consumption while securing the life-support systems underpinning current and future human well-being. Essential to meeting this challenge is the incorporation of natural capital and the ecosystem services it provides into decision-making. We explore progress and crucial gaps at this frontier, reflecting upon the 10 y since the Millennium Ecosystem Assessment. We focus on three key dimensions of progress and ongoing challenges: raising awareness of the interdependence of ecosystems and human well-being, advancing the fundamental interdisciplinary science of ecosystem services, and implementing this science in decisions to restore natural capital and use it sustainably. Awareness of human dependence on nature is at an all-time high, the science of ecosystem services is rapidly advancing, and talk of natural capital is now common from governments to corporate boardrooms. However, successful implementation is still in early stages. We explore why ecosystem service information has yet to fundamentally change decision-making and suggest a path forward that emphasizes: (i) developing solid evidence linking decisions to impacts on natural capital and ecosystem services, and then to human well-being; (ii) working closely with leaders in government, business, and civil society to develop the knowledge, tools, and practices necessary to integrate natural capital and ecosystem services into everyday decision-making; and (iii) reforming institutions to change policy and practices to better align private short-term goals with societal long-term goals.}, - isbn = {1503751112}, - pmid = {26082539}, - keywords = {Beneficiary,Decision making,Human well-being,Resilience,Sustainable development}, - file = {/Users/fabio/Zotero/storage/G5SXAZF7/full-text.pdf} -} - -@article{gugerellSystemicKnowledgeIntegration2023, - title = {Systemic Knowledge Integration in Transdisciplinary and Sustainability Transformation Research}, - author = {Gugerell, Katharina and {Radinger-Peer}, Verena and Penker, Marianne}, - year = {2023}, - month = jun, - journal = {Futures}, - volume = {150}, - pages = {103177}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2023.103177}, - urldate = {2023-05-11}, - abstract = {While knowledge integration has been well framed conceptually, the structural aspects that support co- learning and knowledge integration in transdisciplinary research remain only modestly addressed. Addressing this gap, we enlighten how a conceptual framework \textendash{} building on former work by Ostrom, Giddens and Whaley \textendash{} could help to structure and analyse systemic knowledge integration processes. The conceptual model is based on a transdisciplinary research project, `Region R\"omerland Carnuntum 2040', aiming to investigate and trigger regional sustainability transformations via the experimentation with a new governance format ``Future council''. The present article is based on the Future Council's patching of rules for knowledge integration as well as a well thought-through accompanying research, which consist of a series of surveys and interviews to reveal subliminal values, capabilities, knowledge and emotions of the regional stakeholders involved in the FC. The conceptual model helped to provide a more equal playing field for systemic knowledge integration in a heterogenous group as well as just representation of marginalized groups (e.g. youth). On the other hand, our findings reveal that structural adaptability comes with the danger of reproducing power structures (e.g. of mayors). For the future we identify a need for more research on social boundaries, values and emotions and their important structuring role for transdisciplinary knowledge integration.}, - langid = {english}, - keywords = {Governance,Institutions,Knowledge integration,Learning,Structuration theory,Sustainability transformations}, - file = {/Users/fabio/Zotero/storage/QZKSYEIA/Gugerell et al. - 2023 - Systemic knowledge integration in transdisciplinar.pdf;/Users/fabio/Zotero/storage/2SNWZFFC/S0016328723000812.html} -} - -@techreport{Guidat2011a, - title = {Lorraine {{Smart Cities Living Lab}}: White Paper on Living Labs}, - author = {Guidat, Claudine and Dupont, Laurent and Skiba, Nathalie and Bretagne, Val{\'e}rie and Camargo, Mauricio and Massouras, Georgios}, - year = {2011}, - pages = {54}, - address = {{Nancy}}, - institution = {{DIRECCTE}} -} - -@article{guillardTypologyConsumersRegarding2023, - title = {A Typology of Consumers Regarding Perceived Obsolescence: {{The}} Paradox of Eco-Conscious Consumers}, - shorttitle = {A Typology of Consumers Regarding Perceived Obsolescence}, - author = {Guillard, Valerie and Le Nagard, Emmanuelle and {de Campos Ribeiro}, Gisele}, - year = {2023}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {137202}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137202}, - urldate = {2023-05-01}, - abstract = {The lifespan of durable goods is a global concern because it has consequences not only in terms of waste management and natural resources but also in terms of consumer well-being. Companies and consumers are concerned, in particular, by the frequency of product replacement, which itself depends, on the consumer side, on their evaluations of the product's perceived obsolescence. The objective of this article is to better explain the intention to replace a durable good while it is still in working order. More specifically, we investigate the role of perceived product obsolescence (PPO) on product replacement intention. An exploratory qualitative study (n\,=\,10) leads to a definition of PPO as the difference between the perceived value of a product owned and what is currently available on the market. Four data collections (n\,=\,948) form the basis for the development of a PPO measurement scale involving five dimensions (aesthetic, social, technological, commercial, environmental), and their association with product replacement intention is demonstrated. Finally, a typology of consumers with respect to their ``PPO scores and individual characteristics'' is built. We show that the most ecologically aware consumers are also the ones who intend to replace the perceived obsolete product the quickest, as they perceive that it is not ecologically efficient enough. These results and this paradox allow us to formulate societal recommendations.}, - langid = {english}, - keywords = {Measurement scale,Perceived product obsolescence,Product replacement intention,Value}, - file = {/Users/fabio/Zotero/storage/F7VGVX9Y/Guillard et al_2023_A typology of consumers regarding perceived obsolescence.pdf;/Users/fabio/Zotero/storage/HNHVZTDT/S0959652623013604.html} -} - -@article{Guimaraes2019, - title = {Who Is Doing Inter- and Transdisciplinary Research, and Why? {{An}} Empirical Study of Motivations, Attitudes, Skills, and Behaviours}, - author = {Guimar{\~a}es, Maria Helena and Pohl, Christian and Bina, Olivia and Varanda, Marta}, - year = {2019}, - month = sep, - journal = {Futures}, - volume = {112}, - pages = {102441}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.102441}, - urldate = {2020-03-14}, - abstract = {We witness a persistent tension between established ways of knowledge production through disciplines, and the urgent need to widen and change, both the production of knowledge and its organization, not least, in order to be able to understand and address the future and its challenges. Witnessing a growing call for inter- and transdisciplinarity (ITD), we set our goal to learn more about scholars who engage in this kind of research by asking these questions: What characterizes inter- and transdisciplinary researchers (ITDRs)? To what extent do these characteristics help ITDRs deal with the challenges of an academic career path? We address both questions by comparing the findings from the relevant literature and semi-structured interviews with ITDRs at different stages in their careers. Our results bring the ITDR personality a step further in taking a form. ITDR personalities can be characterized by a particular mix of motivations, attitudes, skills, and behaviors. However, the academic environment and its career paths do not seem prepared and adapted for such ITDR personalities. Furthermore and in contrast to the literature, the T-shaped training (first, disciplinary depth and then, ITDR) is considered one possible career path, with the other one being a specialization in facilitating knowledge integration and in developing theories, methods, and tools for ITD. Our analysis concludes by exploring the future of ITD if formal training and learning would be available and if the contextual conditions would be more conducive to undertaking this type of research.}, - keywords = {Academic career trajectory,Academic system,Interdisciplinarity,INTREPID cost action,Transdisciplinary individuals}, - file = {/Users/fabio/Zotero/storage/B8GYXWQ3/full-text.pdf} -} - -@book{guineeHandbookLifeCycle2002, - title = {Handbook on {{Life Cycle Assessment}}: {{Operational Guide}} to the {{ISO Standards}}}, - shorttitle = {Handbook on {{Life Cycle Assessment}}}, - author = {Guin{\'e}e, J. B.}, - year = {2002}, - month = may, - publisher = {{Springer Science \& Business Media}}, - abstract = {In 1992 the Centre of Environmental Science (CML) at Leiden University, The Netherlands, published a Guide on Environmental Life Cycle Assessment (LCA) methodology. Many copies of this guide have been sold all over the world, setting the standard for a long time. Since then LCA methodology has progressed enormously and the International Organization for Standardization (ISO) has published a series of Standards on LCA. These developments have now been incorporated into a new Handbook on LCA authored by CML in cooperation with a number of other important institutes in the area of LCA. The general aim of this Handbook on LCA is to provide a stepwise `cookbook' with operational guidelines for conducting an LCA study step-by-step, justified by a scientific background document, based on the ISO Standards for LCA. The different ISO elements and requirements are made operational to the `best available practice' for each step. This book will appeal to persons from a wide range of scientific disciplines working in industry, in government, as consultants, or at university, who are interested in learning more about LCA and in performing LCA studies. It will be of especial interest to students and researchers in the field of LCA, industrial ecology, and those interested in environmental sciences in general. CML is strongly involved in the development of a standard methodology to determine environmental impacts of products, i.e., LCA. This is done within international fora such as the Society for Environmental Toxicology and Chemistry (SETAC), the International Organization for Standardization (ISO), and the United Nations Environmental Programme (UNEP).}, - googlebooks = {Q1VYuV5vc8UC}, - isbn = {978-1-4020-0228-1}, - langid = {english}, - keywords = {Nature / Environmental Conservation \& Protection,Nature / Natural Resources,Science / Environmental Science,Science / Life Sciences / Ecology,Technology \& Engineering / Environmental / General,Technology \& Engineering / Environmental / Pollution Control,Technology \& Engineering / Quality Control} -} - -@article{guineeLifeCycleAssessmentbased2022, - title = {Life Cycle Assessment-Based {{Absolute Environmental Sustainability Assessment}} Is Also Relative}, - author = {Guin{\'e}e, Jeroen B. and de Koning, Arjan and Heijungs, Reinout}, - year = {2022}, - month = mar, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13260}, - urldate = {2022-04-11}, - abstract = {Over the past years, an increasing number of scholarly papers have used the planetary boundaries (PBs) within life cycle assessment (LCA) to determine if the life cycle impacts of a product system fit within those PBs and thereby establish the absolute sustainability of the product system. This type of LCA is nowadays coined as LCA-based Absolute Environmental Sustainability Assessment (AESA). "Absolute" thereby refers to methods enabling the comparison of environmental impacts of products, companies , nations, and so on, with an assigned share of environmental carrying capacity for various impact categories. A recent review of LCA-based AESA methods and their applications characterized 47 studies "according to their intended application, impact categories, basis of carrying capacity estimates, spatial differentiation of environmental model and principles for assigning carrying capacity." However, the review and the majority of studies reviewed did not, or only to a limited extent, discuss potential temporal issues of assigning carrying capacity to product systems. Several of the carrying capacity estimates have a time dimension while LCA results lack a time dimension. In this article, we show that assigning PBs to product systems is only technically possible when adopting several fundamental though unrealistic assumptions, and conclude that even product LCA-based AESA is relative. This should not withhold scholars from developing approaches applying the PBs in LCA, but it should prevent them from claiming and using the term "absolute."}, - keywords = {Absolute Environmental Sustainability Assessment (AESA),industrial ecology,life cycle assessment (LCA),planetary boundaries,temporal issues}, - file = {/Users/fabio/Zotero/storage/IKVYU9VD/full-text.pdf} -} - -@article{Gunasekaran2020b, - title = {Investigation of Mechanical Properties of {{PLA}} Printed Materials under Varying Infill Density}, - author = {Gunasekaran, K.N. and Aravinth, Vishaal and Muthu Kumaran, C.B. and Madhankumar, K. and Pradeep Kumar, S.}, - year = {2020}, - month = oct, - journal = {Materials Today: Proceedings}, - publisher = {{Elsevier BV}}, - issn = {22147853}, - doi = {10.1016/j.matpr.2020.09.041}, - urldate = {2020-11-11}, - abstract = {Fused deposition modelling, a rapid prototyping technology, was used to produce various polymer components in which the part is built by layer by layer. PLA is becoming a commonly used thermoplastic in open-source FDM machines for various engineering applications and it is essential that mechanical properties of FDM-processed PLA parts must be properly understood. Hence in this proposed work using PLA material wire filament through FDM technique the specimens are built under optimum process parameters and varying the infill density. The infill density of the PLA printed specimens were varied as 25\%, 50\%, 75\% and 100\%. The printed specimens as per ASTM standards were taken for mechanical testing and properties like hardness, tensile, impact and flexural strength were measured, it was found that the specimens printed with 100\% infill density projected better mechanical properties and with the increase of infill density the mechanical properties of the printed specimens are also found to be increased.}, - keywords = {Additive,Deposition,Fusion,Infill density,Manufacturing,Mechanical testing,Modelling PLA,Slicing}, - file = {/Users/fabio/Zotero/storage/GEQPL4XS/Gunasekaran et al. - Unknown - Investigation of mechanical properties of PLA printed materials under varying infill density.pdf} -} - -@article{gunawanWhatDrivesEcopreneurship2020, - title = {What Drives Ecopreneurship in Women and Men? - {{A}} Structured Literature Review}, - author = {Gunawan, Arien Arianti and {van Riel}, Allard (A.C.R.) and Essers, Caroline}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124336}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124336}, - urldate = {2020-10-19} -} - -@article{guntonValuingEconomicsPluralistic2022, - ids = {Gunton2022}, - title = {Valuing beyond Economics: {{A}} Pluralistic Evaluation Framework for Participatory Policymaking}, - shorttitle = {Valuing beyond Economics}, - author = {Gunton, Richard M. and Hejnowicz, Adam P. and Basden, Andrew and {van Asperen}, Eline N. and Christie, Ian and Hanson, David R. and Hartley, Sue E.}, - year = {2022}, - month = jun, - journal = {Ecological Economics}, - volume = {196}, - pages = {107420}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2022.107420}, - urldate = {2022-04-24}, - abstract = {The sustainability challenges facing societies call for policies and governance systems that are attuned to the diversity of goods that support and enrich human life via ecological, technical and other kinds of systems, and to the plurality of values that people hold across diverse cultures and belief systems. A pluralistic evaluation framework (PEF) is here presented as a tool for considering diverse kinds of goodness as perceived by diverse stakeholders in the design and evaluation of policies or projects. It arises from considering a suite of aspects of meaning (biotic, economic, aesthetic, etc.) at each of three stages, namely: identifying relevant stakeholders, mapping real-world systems and assessing modes of valuing. This framework, drawing on the philosophical work of Herman Dooyeweerd and Dirk Vollenhoven, offers a joined-up, participatory approach to policymaking. We report pilot trials of the PEF with groups of policymakers at a series of workshops, demonstrating that it provides additional perspectives and unification of core issues and can be used in a wide range of areas of policymaking and project assessment. We also illustrate its potential application to a controversial environmental project and outline how a pluralistic evaluation framework can be used in tandem with existing frameworks.}, - langid = {english}, - keywords = {Policy,Process,Reformational philosophy,Social-ecological system,Stakeholder engagement,Value}, - file = {/Users/fabio/Zotero/storage/APE5LI9C/Gunton et al. - 2022 - Valuing beyond economics A pluralistic evaluation.pdf;/Users/fabio/Zotero/storage/GSTXU4PG/S0921800922000829.html} -} - -@article{Guo2013, - title = {Additive Manufacturing: Technology, Applications and Research Needs}, - author = {Guo, Nannan and Leu, Ming C.}, - year = {2013}, - month = sep, - journal = {Frontiers of Mechanical Engineering}, - volume = {8}, - number = {3}, - pages = {215--243}, - issn = {2095-0233}, - doi = {10.1007/s11465-013-0248-8}, - urldate = {2014-07-24}, - keywords = {additive manufacturing,am,am applications,am materials,am processes}, - file = {/Users/fabio/Zotero/storage/MKTVHA9V/Guo, Leu - 2013 - Additive manufacturing technology, applications and research needs.pdf} -} - -@article{Guo2018, - title = {Combination of Cloud Manufacturing and {{3D}} Printing: Research Progress and Prospect}, - author = {Guo, Liang and Qiu, Jingxiong}, - year = {2018}, - month = may, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {96}, - number = {5-8}, - pages = {1929--1942}, - issn = {0268-3768}, - doi = {10.1007/s00170-018-1717-3} -} - -@article{guoWhyChinaStruggling2022, - title = {Why Is {{China}} Struggling with Waste Classification? {{A}} Stakeholder Theory Perspective}, - author = {Guo, Shihong and Chen, Liangliang}, - year = {2022}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {183}, - pages = {106312}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106312}, - urldate = {2022-05-23} -} - -@article{guPromotingChineseUrban2022, - title = {Promoting {{Chinese}} Urban Residents' Participation in Source Separation and Recycling}, - author = {Gu, Binxian and Yao, Yanbin and Hang, Huimin and Wang, Yulin and Jia, Renfu and Liu, Lingxuan and Ling, Hui and Tang, Xinyi and Zhang, Haijie and Wu, Zhiwei and Wu, Yongxiang and Fujiwara, Takeshi and Bai, Yanchao}, - year = {2022}, - month = feb, - journal = {Waste Management}, - volume = {139}, - pages = {290--299}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.12.032}, - urldate = {2022-01-25} -} - -@article{Gupta2007, - title = {Poly(Lactic Acid) Fiber: {{An}} Overview}, - author = {Gupta, Bhuvanesh and Revagade, Nilesh and Hilborn, J{\"o}ns}, - year = {2007}, - month = apr, - journal = {Progress in Polymer Science}, - volume = {32}, - number = {4}, - pages = {455--482}, - issn = {00796700}, - doi = {10.1016/j.progpolymsci.2007.01.005}, - urldate = {2014-07-16}, - abstract = {Poly(lactic acid) (PLA) has generated great interest as one of the most innovative materials being developed for a wide range of applications. The polymer is thermoplastic and biodegradable, which makes it highly attractive for biological and medical applications. It can be transformed by spinning into filaments for subsequent fabrication of desirable textile structures. Spinning may be accomplished by various routes, each with its merits and demerits. The medical applications of this polymer arise from its biocompatibility: the degradation product, lactic acid, is metabolically innocuous. The fibers may be fabricated into various forms and may be used for implants and other surgical applications such as sutures. Tissue engineering is the most recent domain where poly(lactic acid) is being used and is found to be one of the most favorable matrix materials. The present article presents a critical review on the production of poly(lactic acid) fiber by various methods, along with correlations between structure and properties of the fibers. The applications of these fibers in various domains are also discussed.}, - file = {/Users/fabio/Zotero/storage/FJZ6HY5D/Gupta, Revagade, Hilborn - 2007 - Poly(lactic acid) fiber An overview.pdf} -} - -@article{Gupta2018, - title = {A {{Review}} on {{3D Printable Techniques}} for {{Tissue Engineering}}}, - author = {Gupta, Sharda and Bissoyi, Akalabya and Bit, Arindam}, - year = {2018}, - month = sep, - journal = {BioNanoScience}, - volume = {8}, - number = {3}, - pages = {868--883}, - issn = {2191-1630}, - doi = {10.1007/s12668-018-0525-4} -} - -@incollection{Gupta2019, - title = {The {{Use}} of {{Modern Technology}} in {{Smart Waste Management}} and {{Recycling}}: {{Artificial Intelligence}} and {{Machine Learning}}}, - booktitle = {Studies in {{Computational Intelligence}}}, - author = {Gupta, Praveen Kumar and Shree, Vidhya and Hiremath, Lingayya and Rajendran, Sindhu}, - year = {2019}, - volume = {823}, - pages = {173--188}, - publisher = {{Springer Verlag}}, - issn = {1860949X}, - doi = {10.1007/978-3-030-12500-4_11}, - urldate = {2020-04-08}, - abstract = {Waste management is one of the primary problem that the world faces irrespective of the case of developed or developing country. The key issue in the waste management is that the garbage bin at public places gets overflowed well in advance before the commencement of the next cleaning process. It in turn leads to various hazards such as bad odor and ugliness to that place which may be the root cause for spread of various diseases. The increase in population, has led to tremendous degradation in the state of affairs of hygiene with respect to waste management system. The spillover of waste in civic areas generates the polluted condition in the neighboring areas. For eliminating or mitigating the garbage's and maintains the cleanness, it requires smartness based waste management system. The need of proper waste management does not end with just collection and proper dispose of garbage. It continues to the level of landfills and the amount that we can possibly recycle. Recycling is estimated to be highly useful given that our dependency on raw products reduces, besides the reduction of waste and subsequent landfills. Once the recycling is done to sort metals, plastics, and glass articles, the use of biodegradable waste can be extended beyond fertilizers and manure. The metals can be reused and the plastics can be diverted from the landfills, which otherwise leads to choking of the earth. The glass materials can be broken and melted back to form new articles after deep cleaning. This chapter aims to understand the use of machine learning and artificial intelligence in the most potential areas and the ultimate need to completely replace the human interaction.}, - keywords = {Artificial intelligence in recycling,Artificial neural networks (ANN),Automation,Graph optimization,Graph theory,Graph theory optimization,Internet of things,Location intelligence,Machine learning,Smart city,Waste management}, - file = {/Users/fabio/Zotero/storage/C5XWH7EN/The Use of Modern Technology in Smart Waste Management and Recycling- Artificial Intelligence and Machine Learning.pdf} -} - -@article{Gupta2019a, - title = {Business, Innovation and Digital Ecosystems Landscape Survey and Knowledge Cross Sharing}, - author = {Gupta, Ranjit and Mejia, Cristian and Kajikawa, Yuya}, - year = {2019}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {147}, - pages = {100--109}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.07.004}, - urldate = {2020-05-21}, - abstract = {Business Ecosystem (BE) has been defined in multiple ways and has been used interchangeably, jointly and overlapping with innovation ecosystems (IE) and digital ecosystems (DE), making it difficult to differentiate, consolidate, utilize and grow the body of knowledge, both in academia and industry. We use text mining techniques to reveal overlapping and exclusive terminologies used in academic articles on the three types of ecosystems. Processing of keywords has identified the current positioning of related domains in a tripartite framework. Keywords Network Analysis has revealed domains that share knowledge with the larger domains of Smart City, Digital Business Ecosystem (DBE) and Helix interaction concepts, thereby providing insights into knowledge sharing across boundaries of BE, IE and DE. The results offer a basis for classification and baseline of current state of knowledge distribution across the ecosystems that can aid in ecosystems design, collaborations planning, interdisciplinary research and policy making.}, - keywords = {Bibliometric analysis,Business ecosystems,Digital ecosystems,Innovation ecosystems,Knowledge management} -} - -@article{guptaBarriersOvercomingStrategies2020, - title = {Barriers and Overcoming Strategies to Supply Chain Sustainability Innovation}, - author = {Gupta, Himanshu and {Kusi-Sarpong}, Simonov and Rezaei, Jafar}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104819}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104819}, - urldate = {2020-06-18} -} - -@article{guptaIndustryCleanerProduction2021, - title = {Industry 4.0, {{Cleaner Production}} and {{Circular Economy}}: An Integrative Framework for Evaluating Ethical and Sustainable Business Performance of Manufacturing Organizations}, - author = {Gupta, Himanshu and Kumar, Ashwani and Wasan, Pratibha}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {295}, - pages = {126253}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126253}, - urldate = {2021-02-28} -} - -@article{guRecyclableWasteRecycling2021, - title = {The Recyclable Waste Recycling Potential towards Zero Waste Cities - {{A}} Comparison of Three Cities in {{China}}}, - author = {Gu, Binxian and Tang, Xinyi and Liu, Lingxuan and Li, Yuanyuan and Fujiwara, Takeshi and Sun, Haohui and Gu, Aijun and Yao, Yanbing and Duan, Ruiyang and Song, Jie and Jia, Renfu}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {295}, - pages = {126358}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126358}, - urldate = {2021-03-08}, - abstract = {Recycling is an essential practice for the successful operation of zero waste cities. It is essential to understand the recyclable waste recycling potential (RWRP). This study quantifies the RWRP of different cities in China. Suzhou, Yangzhou, and Suqian represent high-, middle- and low-income cities, respectively. The RWRP statistics are based on systematic multiple longitudinal tracking field surveys conducted between 2016 and 2019. Obvious RWRP spatio-temporal disparities were observed between inter-city and intra-city. For instance, Suzhou showed a slight increase in high resource value paper; Yangzhou had a slight increase in low resource value paper; and Suqian had a huge increase in no resource value paper and plastic. Additionally, more recyclable organics were generated in the old districts of Suzhou, and they were also predominant in the new districts of Yangzhou. No significant difference was observed in recyclable organics and recyclable material in Suqian. However, recyclable organics is a constant, while recyclable material fluctuates in the case cities. Household consumption structure has a major impact on RWRP. Other factors, such as economic development, urban resident population, consumption preferences, local customs and culture, as well as residential lifestyles also affect RWRP. This study proposes three policies: 1) to establish flexible and carefully planned recycling strategies, 2) to develop the distribution market of composting products, and 3) to incorporate economic and demographic initiatives to develop a workable recycling policy that can lead to zero waste implementation in the future. The zero waste concept was further assessed by the authors' review of 69 cities worldwide based on previous research. We compared past results with the three featured cities in this study and 35 other Chinese cities, thereby presenting a world view of zero waste potential. It is anticipated that representative cities' RWRP quantification and policy implementations can be a model for municipal solid waste management and recycling policies in other Chinese cities, which will help them transition to zero waste cities and probably provide a model for cities worldwide.} -} - -@article{Gurtoo2010, - title = {Explaining the Do-It-Yourself ({{DIY}}) Retail Market in a Developing Country: {{Preliminary}} Lessons from {{India}}}, - author = {Gurtoo, Anjula and Sarup, Vidosh and Williams, Colin C.}, - year = {2010}, - month = jul, - journal = {International Review of Retail, Distribution and Consumer Research}, - volume = {20}, - number = {3}, - pages = {335--351}, - publisher = {{Routledge}}, - issn = {09593969}, - doi = {10.1080/09593969.2010.491210}, - urldate = {2020-05-04}, - abstract = {Until now, studies of the Do-It-Yourself (DIY) market have been confined to advanced market economies, with developing countries ignored. This article begins to bridge this gap. Analysing a survey of 500 households in India, a developing country characterized by cheap and surplus labour, and a different cultural milieu, this article investigates whether it is possible to distinguish DIY consumers in the same manner as in Western nations as 'reluctant' or 'willing' DIYers. The analysis finds that in India, DIY consumers can be concurrently both willing DIYers doing so for pleasure (the choice model) or seeking selfidentity from the end-product (post-modern theory) and at the same time reluctant DIYers doing so out of economic necessity reasons (economic determinism model) or due to the lack of appropriately skilled labour (a market failure model). Results also reflected cultural connotations to the respondent perceptions. The multiplicity of reasons, in consequence, shows that no one theorisation of DIY consumers' motives is universally relevant but all theories are sometimes valid. As such, a new typology of DIY consumers' motives has been inductively generated which is theoretically integrative. The results conclude on the need to move beyond using one theory and treating the others as rival competing theories, for a comprehensive explanation of DIY. \textcopyright{} 2010 Taylor \& Francis.}, - keywords = {Consumer motives,Developing country,Do-it-yourself,Home improvement,India} -} - -@article{gusser-fachbachImpactConvenienceAttributes2023, - title = {The Impact of Convenience Attributes on the Willingness-to-Pay for Repair Services}, - author = {{G{\"u}sser-Fachbach}, Ines and Lechner, Gernot and Reimann, Marc}, - year = {2023}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {198}, - pages = {107163}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107163}, - urldate = {2023-08-31}, - abstract = {Excessive cost and inconvenient services are frequent reasons people do not use repair services for consumer goods. By using conjoint analysis we aim to quantify the relative importance of repair price and convenience attributes and determine how they affect a consumer's willingness-to-pay (WTP) for repair services. Our results suggest that the relative importance of attributes such as repair price and time, and guarantees for repair or repair company authorisations, is stable across the different considered product categories. Yet, we find that the relative importance of repair price (which is unanimously highest) declines and convenience attributes are becoming more relevant when considering more expensive products. Finally, WTP for repair only slightly increases for more expensive products according to our study. Our results can help repair companies to improve their service. They can also inform policy-makers on designing a repair-promoting environment.}, - keywords = {Conjoint,Repair,Repair company,Service convenience,Willingness-to-pay}, - file = {/Users/fabio/Zotero/storage/G4C6JSY3/S0921344923002987.html} -} - -@article{gusser-fachbachRepairServiceConvenience2023, - title = {Repair Service Convenience in a Circular Economy: {{The}} Perspective of Customers and Repair Companies}, - shorttitle = {Repair Service Convenience in a Circular Economy}, - author = {{G{\"u}sser-Fachbach}, Ines and Lechner, Gernot and Ramos, Tom{\'a}s B. and Reimann, Marc}, - year = {2023}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {415}, - pages = {137763}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137763}, - urldate = {2023-07-03}, - abstract = {Using repair services instead of new purchases creates local added value and contributes to a circular economy. The main aim of this research was to characterize repair service convenience for customers and to investigate ways to increase convenience to make repairs more attractive for customers, as the construct service convenience has neither been used nor adapted to a repair context until now. For this purpose, focus group interviews with potential customers of repair companies and interactive workshops with repair companies were conducted in the region of Styria (Austria). Findings state that a variety of factors like lack of information regarding repair services and product repairability, inconvenient store hours, or long waits reduce repair service convenience. However, due to skilled labor shortage, long delivery times of spare parts, or lacking financial resources for advertisements, repair companies can only partially improve convenience. Considering that, interventions from different actors, for example, the local government are needed as they can increase convenience by organizing awareness/information events, repair networks, or central repair-points. Hence, this study highlights once more the necessity to collaborate with different stakeholders (including customers, repair companies, local initiatives, and governments) to successfully transform the linear economy to a circular economy.}, - langid = {english}, - keywords = {Circular economy,Customers,Repair,Repair companies,Service convenience}, - file = {/Users/fabio/Zotero/storage/IYNDCSA5/Güsser-Fachbach et al. - 2023 - Repair service convenience in a circular economy .pdf;/Users/fabio/Zotero/storage/AFA32P94/S0959652623019212.html} -} - -@article{gutierrez-bucheliSustainabilityEngineeringEducation2022, - title = {Sustainability in Engineering Education: {{A}} Review of Learning Outcomes}, - author = {{Gutierrez-Bucheli}, Laura and Kidman, Gillian and Reid, Alan}, - year = {2022}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {330}, - pages = {129734}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129734}, - urldate = {2021-12-10} -} - -@article{Gutowski2009, - title = {Thermodynamic Analysis of Resources Used in Manufacturing Processes}, - author = {Gutowski, Timothy G. and Branham, Matthew S. and Dahmus, Jeffrey B. and Jones, Alissa J. and Thiriez, Alexandre and Sekulic, Dusan P.}, - year = {2009}, - journal = {Environmental Science and Technology}, - volume = {43}, - number = {5}, - pages = {1584--1590}, - issn = {0013936X}, - doi = {10.1021/es8016655}, - abstract = {In this study we use a thermodynamic framework to characterize the material and energy resources used in manufacturing processes. The analysis and data span a wide range of processes from "conventional" processes such as machining, casting, and injection molding, to the so-called "advanced machining" processes such as electrical discharge machining and abrasive waterjet machining, and to the vapor-phase processes used in semiconductor and nanomaterials fabrication. In all, 20 processes are analyzed. The results show that the intensity of materials and energy used per unit of mass of material processed (measured either as specific energy or exergy) has increased by at least 6 orders of magnitude over the past several decades. The increase of material/energy intensity use has been primarily a consequence of the introduction of new manufacturing processes, rather than changes in traditional technologies. This phenomenon has been driven by the desire for precise small-scale devices and product features and enabled by stable and declining material and energy prices over this period. We illustrate the relevance of thermodynamics (including exergy analysis) for all processes in spite of the fact that long-lasting focus in manufacturing has been on product quality--not necessarily energy/material conversion efficiency. We promote the use of thermodynamics tools for analysis of manufacturing processes within the context of rapidly increasing relevance of sustainable human enterprises. We confirm that exergy analysis can be used to identify where resources are lost in these processes, which is the first step in proposing and/or redesigning new more efficient processes.}, - isbn = {0013936X}, - pmid = {19350939}, - file = {/Users/fabio/Zotero/storage/833UDDBN/Gutowski et al. - 2009 - Thermodynamic analysis of resources used in manufacturing processes.pdf} -} - -@inproceedings{Guzman2008, - title = {Living {{Labs Fostering Open Innovation}} and {{Rural Development}}: {{Methodology}} and {{Results}}}, - booktitle = {Proceedings of the 14th {{International Conference}} on {{Concurrent Enterprising}}}, - author = {Guzman, Javier Garcia and Schaffers, Hans and Bilicki, Vilmos and Merz, Christian and Valenzuela, Monica}, - year = {2008}, - volume = {June}, - abstract = {Rural living labs constitute a new and not yet validated approach of enabling user driven ICT-based innovation initiatives geared towards economic and social development in rural areas. At the same time living labs provide a context for open innovation based on partnerships between all stakeholders. This paper discusses methodologies and strategies for developing, launching and operating rural living labs for innovative collaborative working environments, and presents initial results from the C@R Integrated Project. Three living labs cases are presented and compared: Homokh\'ati in Hungary, Sekhukhune in South-Africa, and Cudillero in Spain. The process of establishing the living lab, the involvement of users, the experimentation and innovation processes, and the technical and business innovations and their impacts on the rural environment are being discussed in order to conclude about effective methodologies and strategies. Such methodologies and strategies include the establishment of stakeholder platforms, the creation of user communities, the cyclic and spiral approach to innovation, and the action research style of participative development. Initial results indicate that in order to be successful, such methodologies and strategies must be strongly tailored to the local situation}, - keywords = {innovation,living labs,methodology,rural,user-centric,validation} -} - -@article{Guzzo2022, - title = {A System Dynamics-Based Framework for Examining {{Circular Economy}} Transitions}, - author = {Guzzo, D. and Pigosso, D. C.A. and Videira, N. and Mascarenhas, J.}, - year = {2022}, - journal = {Journal of Cleaner Production}, - volume = {333}, - number = {May 2021}, - pages = {129933}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.129933}, - abstract = {Decision-makers in the public policy and business arenas need tools to deal with multiple sources of complexity in Circular Economy (CE) transitions. System Dynamics (SD) facilitates coping with increased complexity by enabling closed-loop thinking via identifying the causal structures underlying behaviour and permitting to proactively experiment with the system through simulation. This research aims to propose and test an SD-based framework for examining CE transitions to supporting decision-making at the micro-, meso-, and macro-levels. Two inductive model-based cases studies led to formalising the framework, finally tested in a third deductive model-based case study. The framework is built upon the well-known stages for building SD simulation models and complemented with domain-specific activities, guiding questions, and expected outcomes when examining CE transitions. The SD-based framework is the first modelling-oriented prescriptive approach to help researchers and practitioners examining CE transitions on their journeys to understand and facilitate changes through SD simulation models.}, - keywords = {Circular economy,Policy experimentation,Simulation models,Sustainability transitions,System dynamics}, - file = {/Users/fabio/Zotero/storage/XWEWDDGB/1-s2.0-S0959652621041020-main.pdf} -} - -@article{Gwamuri2014, - title = {Reversing the {{Trend}} of {{Large Scale}} and {{Centralization}} in {{Manufacturing}}: {{The Case}} of {{Distributed Manufacturing}} of {{Customizable}} 3-{{D-Printable Self-Adjustable Glasses}}}, - author = {Gwamuri, Jephias and Wittbrodt, Ben T and Anzalone, Nick C and Pearce, Joshua M}, - year = {2014}, - month = dec, - journal = {Challenges in Sustainability}, - volume = {2}, - number = {1}, - pages = {30--40}, - issn = {2297-6477}, - doi = {10.12924/cis2014.02010030}, - abstract = {Although the trend in manufacturing has been towards centralization to leverage economies of scale, the recent rapid technical development of open-source 3-D printers enables low-cost distributed bespoke production. This paper explores the potential advantages of a distributed manufacturing model of high-value products by investigating the application of 3-D printing to self-refraction eyeglasses. A series of parametric 3-D printable designs is developed, fabricated and tested to overcome limitations identified with mass-manufactured self-correcting eyeglasses designed for the developing world's poor. By utilizing 3-D printable self-adjustable glasses, communities not only gain access to far more diversity in product design, as the glasses can be customized for the individual, but 3-D printing also offers the potential for significant cost reductions. The results show that distributed manufacturing with open-source 3-D printing can empower developing world communities through the ability to print less expensive and customized self-adjusting eyeglasses. This offers the potential to displace both centrally manufactured conventional and self-adjusting glasses while completely eliminating the costs of the conventional optics correction experience, including those of highly-trained optometrists and ophthalmologists and their associated equipment. Although, this study only analyzed a single product, it is clear that other products would benefit from the same approach in isolated regions of the developing world.}, - keywords = {0,2014 by the authors,3,3-d printing,additive layer manufacturing,attribution license,by,creativecommons,development,distributed manufacturing,eye care,glasses,http,licensee librello,licenses,org,switzerland,this open access article,under a creative commons,was published}, - file = {/Users/fabio/Zotero/storage/5FCTSRCV/Reversing the Trend of Large Scale and Centralization in Manufacturing The Case of Distributed Manufacturing of Customizable 3-D-Printable Self-Adjustable Glasses (2014).pdf} -} - -@article{Gwamuri2016, - title = {High-{{Efficiency Solar-Powered}} 3-{{D Printers}} for {{Sustainable Development}}}, - author = {Gwamuri, Jephias and Franco, Dhiogo and Khan, Khalid and Gauchia, Lucia and Pearce, Joshua}, - year = {2016}, - month = jan, - journal = {Machines}, - volume = {4}, - number = {1}, - pages = {3}, - issn = {2075-1702}, - doi = {10.3390/machines4010003}, - abstract = {The release of the open source 3-D printer known as the RepRap (a self-Replicating Rapid prototyper) resulted in the potential for distributed manufacturing of products for significantly lower costs than conventional manufacturing. This development, coupled with open source-appropriate technology (OSAT), has enabled the opportunity for 3-D printers to be used for sustainable development. In this context, OSAT provides the opportunity to modify and improve the physical designs of their printers and desired digitally-shared objects. However, these 3-D printers require electricity while more than a billion people still lack electricity. To enable the utilization of RepRaps in off-grid communities, solar photovoltaic (PV)-powered mobile systems have been developed, but recent improvements in novel delta-style 3-D printer designs allows for reduced costs and improved performance. This study builds on these innovations to develop and experimentally validate a mobile solar-PV-powered delta 3-D printer system. It is designed to run the RepRap 3-D printer regardless of solar flux. The electrical system design is tested outdoors for operating conditions: (1) PV charging battery and running 3-D printer; (2) printing under low insolation; (3) battery powering the 3-D printer alone; (4) PV charging the battery only; and (5) battery fully charged with PV-powered 3-D printing. The results show the system performed as required under all conditions providing feasibility for adoption in off-grid rural communities. 3-D printers powered by affordable mobile PV solar systems have a great potential to reduce poverty through employment creation, as well as ensuring a constant supply of scarce products for isolated communities.}, - isbn = {1906487146}, - keywords = {3-d printing,appropriate technology,distributed manufacturing,off-grid,photovoltaic,renewable energy,solar energy,sustainable development}, - file = {/Users/fabio/Zotero/storage/PMTTGMTK/High-Efficiency Solar-Powered 3-D Printers for Sustainable Development.pdf} -} - -@article{gyimahSevenYearsUnited2023, - title = {Seven Years of {{United Nations}}' Sustainable Development Goals in {{Africa}}: {{A}} Bibliometric and Systematic Methodological Review}, - shorttitle = {Seven Years of {{United Nations}}' Sustainable Development Goals in {{Africa}}}, - author = {Gyimah, Prince and Appiah, Kingsley Opoku and Appiagyei, Kwadjo}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - pages = {136422}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136422}, - urldate = {2023-02-13}, - abstract = {Over the past seven years, the advancement of Sustainable Development Goals (SDGs) is gaining increasing attention in the African context. Consistent with this effort, the present study aims to review the existing literature systematically to document contribution and methodological gaps. Specifically, the review systematically explores, through bibliometric literature and systematic method reviews, authors, countries, cited papers, journals, author's keywords, topic dendrogram, and methodological choices of papers associated with Africa SDGs scholars. The R Studio software is used to analyze 200 papers on SDGs, authored by 606 scholars and published in 102 peer-reviewed leading sources between 2015 and 2022. The results reveal that SDGs literature in Africa is an imminent study area, and there are two main strands of literature advancing SDGs in Africa: (1) business growth, entrepreneurship, and poverty reduction, and (2) renewable energy, tourism, and ICT. Key findings from the analysis of the papers are discussed, and implications for future research directions consisting of research questions, research methods and designs, and SDGs research are provided.}, - langid = {english}, - keywords = {Africa,Agenda 2030,Literature review,software,Sustainability,Sustainable development education}, - file = {/Users/fabio/Zotero/storage/8AH3673U/S0959652623005802.html} -} - -@inproceedings{h.sequinRapidPrototyping3D2005, - title = {Rapid {{Prototyping}}: {{A 3D Visualization Tool Takes}} on {{Sculpture}} and {{Mathematical Forms}}}, - booktitle = {{{ACM}}}, - author = {H. S{\'e}quin, Carlos}, - year = {2005}, - volume = {48}, - pages = {66--73}, - abstract = {Despite the abundance of three-dimensional visualization tools available to the mathematician, most are only capable of rendering an image or animation on a flat computer screen. Enter rapid prototyping: technology that transforms a math ematical or computer-generated model of a three-dimensional object into a real, physical sculpture. Devices known as 3D printers, which render layers of plas ter, plastic, or some other medium into computer-defined shapes, are becoming commonplace in design and manufacturing. This article describes how rapid pro totyping (RP) technology can yield new insights into the geometry of surfaces and solids. The article's most striking feature is its assortment of photographs of physical models produced using RP: minimal surfaces, Klein bottles, surfaces with knotted boundaries, and even stages of a sphere eversi?n. From these examples, it is easy to see the advantages of physical models over images; the ability to hold and examine a physical object makes understanding the geometry much easier. As a case in point, the author describes building a 12-foot-tall snow sculpture of a Scherk-Collins toroid. During construction, the sculpting team relied heavily on a 6-inch RP model of the toroid to help navigate the twisting, interwoven surface. Their sculpture, called The Whirled White Web, won the silver medal in the 2003 International Snowsculpting Championships in Breckenridge, Colorado. DH} -} - -@article{Ha2012, - title = {Application to Refrigerator Plastics by Mechanical Recycling from Polypropylene in Waste-Appliances}, - author = {Ha, Kyung Ho and Kim, Moon Saeng}, - year = {2012}, - journal = {Materials and Design}, - volume = {34}, - pages = {252--257}, - publisher = {{Elsevier Ltd}}, - issn = {02641275}, - doi = {10.1016/j.matdes.2011.08.014}, - abstract = {For the application to refrigerator plastics by mechanical recycling from polypropylene (PP) in waste-appliances, it needs to identify the degradation and heterogeneity of recycled polypropylene (RPP). It is applicable the thermal analysis such as differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA), spectroscopic analysis such as Fourier Transform Infrared (FTIR) and morphological analysis such as scanning electronic microscope (SEM). The analysis results show that RPP from waste-appliances is the polyethylene (PE) and polypropylene (PP) copolymer enhanced impact property (Impact-PP) and it is possible to apply refrigerator plastics with good impact property at low temperature. Finally, the performance evaluation of RPP is estimated by Gel Permeation Chromatography (GPC) analysis and is performed by the various mechanical and physical testing methods. It shows that RPP has relatively high molecular weight and balanced properties with strength and toughness. It is expected that RPP by the mechanical recycling from waste-appliances will have about 50\% cost-merit. ?? 2011 Elsevier Ltd.}, - isbn = {0261-3069}, - keywords = {A. Polymers,A. Thermoplastics,C. Recycling}, - file = {/Users/fabio/Zotero/storage/ALP6XRNN/Application to refrigerator plastics by mechanical recycling from polypropylene in waste-appliances.pdf} -} - -@article{Haarhaus2020, - title = {Building Dynamic Capabilities to Cope with Environmental Uncertainty: {{The}} Role of Strategic Foresight}, - author = {Haarhaus, Tim and Liening, Andreas}, - year = {2020}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {155}, - pages = {120033}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120033}, - urldate = {2020-04-24}, - abstract = {Increasing environmental uncertainty poses significant challenges for organizations. Although scholars generally agree that companies require dynamic capabilities to flexibly respond to and shape uncertain environments, only little empirical research has been conducted on the factors that facilitate the development of these capabilities. This study addresses this gap and introduces strategic foresight as an important antecedent of firms' dynamic capabilities. The paper investigates the impact of strategic foresight on two distinct types of dynamic capabilities, namely strategic flexibility and decision rationality, and how the influence of strategic foresight is moderated by the degree of environmental uncertainty. We test our hypotheses by adopting a mixed-methods approach, using both qualitative information gathered trough five expert interviews, as well as survey data collected from 79 managers familiar with strategic foresight practices. The obtained results indicate a significant positive impact of strategic foresight on firms' strategic flexibility and decision rationality. Furthermore, this study finds that environmental uncertainty strengthens the positive effect of strategic foresight on strategic flexibility. Contributions to strategic foresight research and managerial practice for firms trying to cope with continuously increasing levels of environmental uncertainty are discussed.}, - keywords = {Decision rationality,Dynamic capabilities,Environmental uncertainty,Strategic flexibility,Strategic foresight} -} - -@article{Haas2015, - title = {How Circular Is the Global Economy?: {{An}} Assessment of Material Flows, Waste Production, and Recycling in the {{European}} Union and the World in 2005}, - author = {Haas, Willi and Krausmann, Fridolin and Wiedenhofer, Dominik and Heinz, Markus}, - year = {2015}, - journal = {Journal of Industrial Ecology}, - volume = {19}, - number = {5}, - pages = {765--777}, - issn = {15309290}, - doi = {10.1111/jiec.12244}, - abstract = {It is increasingly recognized that the growing metabolism of society is approaching limitations both with respect to sources for resource inputs and sinks for waste and emission outflows. The circular economy \{(CE)\} is a simple, but convincing, strategy, which aims at reducing both input of virgin materials and output of wastes by closing economic and ecological loops of resource flows. This article applies a sociometabolic approach to assess the circularity of global material flows. All societal material flows globally and in the European Union \{(EU-27)\} are traced from extraction to disposal and presented for main material groups for 2005. Our estimate shows that while globally roughly 4 gigatonnes per year \{(Gt/yr)\} of waste materials are recycled, this flow is of moderate size compared to \{62\textasciitilde Gt/yr\} of processed materials and outputs of \{41\textasciitilde Gt/yr.\} The low degree of circularity has two main reasons: First, 44\% of processed materials are used to provide energy and are thus not available for recycling. Second, socioeconomic stocks are still growing at a high rate with net additions to stocks of \{17\textasciitilde Gt/yr.\} Despite having considerably higher end-of-life recycling rates in the \{EU,\} the overall degree of circularity is low for similar reasons. Our results indicate that strategies targeting the output side (end of pipe) are limited given present proportions of flows, whereas a shift to renewable energy, a significant reduction of societal stock growth, and decisive eco-design are required to advance toward a \{CE.\}}, - isbn = {1530-9290}, - keywords = {Circular economy,Energy transition,Industrial ecology,Material flow accounting,Recycling,Sustainable resource use} -} - -@article{Haas2022, - title = {Developing Future Visions for Bio-Plastics Substituting {{PET}} \textendash{} a Backcasting Approach}, - author = {Haas, Verena and Wenger, Julia and Ranacher, Lea and Guigo, Nathanael and Sousa, Andreia and Stern, Tobias}, - year = {2022}, - month = may, - journal = {Sustainable Production and Consumption}, - volume = {31}, - pages = {370--383}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2022.02.019}, - urldate = {2022-03-14} -} - -@article{Haase2014, - title = {A Quantitative Review of Urban Ecosystem Service Assessments: {{Concepts}}, Models, and Implementation}, - author = {Haase, Dagmar and Larondelle, Neele and Andersson, Erik and Artmann, Martina and Borgstr{\"o}m, Sara and Breuste, J{\"u}rgen and {Gomez-Baggethun}, Erik and Gren, {\AA}sa and Hamstead, Zo{\'e} and Hansen, Rieke and Kabisch, Nadja and Kremer, Peleg and Langemeyer, Johannes and Rall, Emily Lorance and McPhearson, Timon and Pauleit, Stephan and Qureshi, Salman and Schwarz, Nina and Voigt, Annette and Wurster, Daniel and Elmqvist, Thomas}, - year = {2014}, - month = apr, - journal = {Ambio}, - volume = {43}, - number = {4}, - pages = {413--433}, - publisher = {{Kluwer Academic Publishers}}, - issn = {00447447}, - doi = {10.1007/s13280-014-0504-0}, - urldate = {2021-04-23}, - abstract = {Although a number of comprehensive reviews have examined global ecosystem services (ES), few have focused on studies that assess urban ecosystem services (UES). Given that more than half of the world's population lives in cities, understanding the dualism of the provision of and need for UES is of critical importance. Which UES are the focus of research, and what types of urban land use are examined? Are models or decision support systems used to assess the provision of UES? Are trade-offs considered? Do studies of UES engage stakeholders? To address these questions, we analyzed 217 papers derived from an ISI Web of Knowledge search using a set of standardized criteria. The results indicate that most UES studies have been undertaken in Europe, North America, and China, at city scale. Assessment methods involve biophysical models, Geographical Information Systems, and valuation, but few study findings have been implemented as land use policy. \textcopyright{} The Author(s) 2014.}, - pmid = {24740614}, - keywords = {Demand-provisioning,Models,Policy implementation,Review,Urban ecosystem services}, - file = {/Users/fabio/Zotero/storage/5DH5NBJG/full-text.pdf} -} - -@article{haaseQuantitativeReviewUrban2014, - title = {A Quantitative Review of Urban Ecosystem Service Assessments: {{Concepts}}, Models, and Implementation}, - author = {Haase, Dagmar and Larondelle, Neele and Andersson, Erik and Artmann, Martina and Borgstr{\"o}m, Sara and Breuste, J{\"u}rgen and {Gomez-Baggethun}, Erik and Gren, {\AA}sa and Hamstead, Zo{\'e} and Hansen, Rieke and Kabisch, Nadja and Kremer, Peleg and Langemeyer, Johannes and Rall, Emily Lorance and McPhearson, Timon and Pauleit, Stephan and Qureshi, Salman and Schwarz, Nina and Voigt, Annette and Wurster, Daniel and Elmqvist, Thomas}, - year = {2014}, - month = apr, - journal = {Ambio}, - volume = {43}, - number = {4}, - pages = {413--433}, - publisher = {{Kluwer Academic Publishers}}, - issn = {00447447}, - doi = {10.1007/S13280-014-0504-0/FIGURES/7}, - urldate = {2021-12-13}, - abstract = {Although a number of comprehensive reviews have examined global ecosystem services (ES), few have focused on studies that assess urban ecosystem services (UES). Given that more than half of the world's population lives in cities, understanding the dualism of the provision of and need for UES is of critical importance. Which UES are the focus of research, and what types of urban land use are examined? Are models or decision support systems used to assess the provision of UES? Are trade-offs considered? Do studies of UES engage stakeholders? To address these questions, we analyzed 217 papers derived from an ISI Web of Knowledge search using a set of standardized criteria. The results indicate that most UES studies have been undertaken in Europe, North America, and China, at city scale. Assessment methods involve biophysical models, Geographical Information Systems, and valuation, but few study findings have been implemented as land use policy. \textcopyright{} The Author(s) 2014.}, - pmid = {24740614}, - keywords = {Demand-provisioning,Models,Policy implementation,Review,Urban ecosystem services}, - file = {/Users/fabio/Zotero/storage/H5ADQWT9/full-text.pdf} -} - -@article{haasSpaceshipEarthOdyssey2020, - title = {Spaceship Earth's Odyssey to a Circular Economy - a Century Long Perspective}, - author = {Haas, Willi and Krausmann, Fridolin and Wiedenhofer, Dominik and Lauk, Christian and Mayer, Andreas}, - year = {2020}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {163}, - pages = {105076}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105076}, - urldate = {2020-08-13}, - abstract = {The circular economy is a rapidly emerging concept promoted as transformative approach towards sustainable resource use within Planetary Boundaries. It is gaining traction with policymakers, industry and academia worldwide. It promises to slow, narrow and close socioeconomic material cycles by retaining value as long as possible, thereby minimizing primary resource use, waste and emissions. Herein, we utilize a sociometabolic systems approach to investigate the global economy as embedded into a materially closed ``spaceship earth'' and to scrutinize the development of circularity during industrialization. We quantify primary material and energy inputs into the economy, as well as all outputs to the environment from 1900-2015. The assessment includes two fundamental cycles: a socioeconomic cycle of secondary materials from end-of-life waste and an ecological cycle in which resulting waste and emissions are assessed against regenerative capacities of biogeochemical systems. In a first approximation, we consider only the carbon-neutral fraction of biomass as renewable. We find that from 1900-2015, socioeconomic and ecological input cycling rates decreased from 43\% (41-51\%) to 27\% (25-30\%), while non-circular inputs increased 16-fold and non-circular outputs 10-fold. The contribution of ecological cycling to circularitydeclined from 91\% to 76\%. We conclude that realizing the transformative potential of the circular economy necessitates addressing four key challenges by research and policy: tackling the growth of material stocks, defining clear criteria for ecological cyclingand eliminating unsustainable biomass production, integrating the decarbonization of the energy system with the circular economy and prioritizing absolute reductions of non-circular flows over maximizing (re)cyclingrates.}, - keywords = {Material and energy flow analysis,Recycling,Social metabolism,Sustainable biomass,Sustainable resource use} -} - -@article{haberlContributionsSociometabolicResearch2019, - title = {Contributions of Sociometabolic Research to Sustainability Science}, - author = {Haberl, Helmut and Wiedenhofer, Dominik and Pauliuk, Stefan and Krausmann, Fridolin and M{\"u}ller, Daniel B. and {Fischer-Kowalski}, Marina}, - year = {2019}, - month = mar, - journal = {Nature Sustainability}, - volume = {2}, - number = {3}, - pages = {173--184}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-019-0225-2}, - urldate = {2022-09-22}, - abstract = {Recent high-level agreements such as the Paris Agreement and the Sustainable Development Goals aim at mitigating climate change, ecological degradation and biodiversity loss while pursuing social goals such as reducing hunger or poverty. Systemic approaches bridging natural and social sciences are required to support these agendas. The surging human use of biophysical resources (materials, energy) results from the pursuit of social and economic goals, while driving global environmental change. Sociometabolic research links the study of socioeconomic processes with biophysical processes and thus plays a pivotal role in understanding society\textendash nature interactions. It includes a broad range of systems science approaches for measuring, analysing and modelling of biophysical stocks and flows as well as the services they provide to society. Here we outline and systematize major sociometabolic research traditions that study the biophysical basis of economic activity: urban metabolism, the multiscale integrated assessment of societal and ecosystem metabolism, biophysical economics, material and energy flow analysis, and environmentally extended input\textendash output analysis. Examples from recent research demonstrate strengths and weaknesses of sociometabolic research. We discuss future research directions that could also help to enrich related fields.}, - copyright = {2019 Springer Nature Limited}, - langid = {english}, - keywords = {Sustainability,Urban ecology}, - file = {/Users/fabio/Zotero/storage/HA3GI9NJ/Haberl et al_2019_Contributions of sociometabolic research to sustainability science.pdf;/Users/fabio/Zotero/storage/G66AJPCZ/s41893-019-0225-2.html} -} - -@article{habermanTenSimpleRules2023, - title = {Ten Simple Rules for Writing a Technical Book}, - author = {Haberman, Jess and Wilson, Greg}, - year = {2023}, - month = aug, - journal = {PLOS Computational Biology}, - volume = {19}, - number = {8}, - pages = {e1011305}, - publisher = {{Public Library of Science}}, - issn = {1553-7358}, - doi = {10.1371/journal.pcbi.1011305}, - urldate = {2023-08-25}, - langid = {english}, - keywords = {Careers,Computer software,Finance,Grammar,Human learning,Internet,Language,Workshops}, - file = {/Users/fabio/Zotero/storage/M9PMJHRS/Haberman_Wilson_2023_Ten simple rules for writing a technical book.pdf} -} - -@article{habibWhatGetsMeasured2022, - title = {What Gets Measured Gets Managed \textendash{} Does It? {{Uncovering}} the Waste Electrical and Electronic Equipment Flows in the {{European Union}}}, - author = {Habib, Hina and Wagner, Michelle and Bald{\'e}, Cornelis Peter and Mart{\'i}nez, Luc{\'i}a Herreras and Huisman, Jaco and Dewulf, Jo}, - year = {2022}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {181}, - pages = {106222}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106222}, - urldate = {2022-03-07}, - abstract = {Electrical and Electronic Equipment (EEE) is valued for its usability, generating an important waste stream, but overall information on their flows through society is generally not available. Data on End-of-Life (EoL) flows is scattered, unstructured, with varying classifications and formats, and uncertain levels of data quality and availability. This provides a big challenge of a structured mapping of the Waste Electrical and Electronic Equipment (WEEE) flows, both officially reported as collected and complementary flows (the term refers to all flows not documented at a national level via designated official compliance schemes). To address these issues, a model quantitatively describing the WEEE flows has been developed based on the Commission Implementing Regulation (EU) 2017/699 and WEEE Directive collection targets. Consequently, it evaluates the impacts of WEEE Directive policies that have been adopted in the past. The model is applied to the EU Member States, as well as Great Britain, Norway, and Switzerland, for the reference year of 2018. The results show that about 9.7 Mt of WEEE was generated, whereas roughly 5.0 Mt were collected. The analysis shows that a significant amount of waste (4.7 Mt) was not properly collected and recycled. Of the total amount of complementary flows, the majority, approx. 1.1 Mt was in complementary recycling (mixed metal scrap). Moreover, the obtained results provide an insight to improve collection targets through multidimensional drivers, i.e., economic policies, legal framework, and sustainability approach that are needed to be set in waste management.}, - keywords = {Exports,Mixed residual waste,Scavenging,Scrap,Unreported WEEE,WEEE Directive} -} - -@article{Habuer2017, - title = {Resource-Availability Scenario Analysis for Formal and Informal Recycling of End-of-Life Electrical and Electronic Equipment in {{China}}}, - author = {{Habuer} and Nakatani, Jun and Moriguchi, Yuichi}, - year = {2017}, - month = apr, - journal = {Journal of Material Cycles and Waste Management}, - volume = {19}, - number = {2}, - pages = {599--611}, - issn = {1438-4957}, - doi = {10.1007/s10163-015-0452-1} -} - -@article{Hacking2008, - title = {A Framework for Clarifying the Meaning of {{Triple Bottom-Line}}, {{Integrated}}, and {{Sustainability Assessment}}}, - author = {Hacking, Theo and Guthrie, Peter}, - year = {2008}, - month = feb, - journal = {Environmental Impact Assessment Review}, - volume = {28}, - number = {2-3}, - pages = {73--89}, - issn = {01959255}, - doi = {10.1016/j.eiar.2007.03.002} -} - -@article{hafsaTypologyAssessmentInnovations2022, - title = {A Typology and Assessment of Innovations for Circular Plastic Packaging}, - author = {Hafsa, Fatima and Dooley, Kevin J. and Basile, George and Buch, Rajesh}, - year = {2022}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {369}, - pages = {133313}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133313}, - urldate = {2022-08-11}, - abstract = {Plastic packaging is a valuable part of the consumer economy, but it creates negative environmental externalities throughout its lifecycle. To reduce these effects, more circular flow is needed, which requires significant innovation. This paper asks w hat are the types of innovations that make plastic packaging more circular, and what is their level of adoption? Over 300 circular innovations are identified and categorized according to Reason's failure mode model, which suggests how failure can be prevented in a system. This results in six types of innovation that are critical to preventing failure (plastic leakage) or enabling circularity throughout the plastic packaging value chain. Circular innovations must address all these failure modes: packaging design choice, consumer behavior, material recovery, material treatment, and material reuse. The study also finds that adoption of circular plastic packaging innovations is low but media and scholarly attention are increasing. This study contributes to the literature by showing how circular innovations address possible failure points within value chain material flows. It proves that circularity is a systemic attribute and requires system-wide effort. The paper also advances understanding of circular economy implementation from a general approach to product-specific approach.}, - langid = {english}, - keywords = {Circular economy,Circular innovations,Circular value chain,Innovation adoption,Plastic packaging}, - file = {/Users/fabio/Zotero/storage/BJJ6I764/S0959652622028992.html} -} - -@article{Hage2008, - title = {An Econometric Analysis of Regional Differences in Household Waste Collection: {{The}} Case of Plastic Packaging Waste in {{Sweden}}}, - author = {Hage, Olle and S{\"o}derholm, Patrik}, - year = {2008}, - journal = {Waste Management}, - volume = {28}, - number = {10}, - pages = {1720--1731}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2007.08.022}, - abstract = {The Swedish producer responsibility ordinance mandates producers to collect and recycle packaging materials. This paper investigates the main determinants of collection rates of household plastic packaging waste in Swedish municipalities. This is done by the use of a regression analysis based on cross-sectional data for 252 Swedish municipalities. The results suggest that local policies, geographic/demographic variables, socio-economic factors and environmental preferences all help explain inter-municipality collection rates. For instance, the collection rate appears to be positively affected by increases in the unemployment rate, the share of private houses, and the presence of immigrants (unless newly arrived) in the municipality. The impacts of distance to recycling industry, urbanization rate and population density on collection outcomes turn out, though, to be both statistically and economically insignificant. A reasonable explanation for this is that the monetary compensation from the material companies to the collection entrepreneurs vary depending on region and is typically higher in high-cost regions. This implies that the plastic packaging collection in Sweden may be cost ineffective. Finally, the analysis also shows that municipalities that employ weight-based waste management fees generally experience higher collection rates than those municipalities in which flat and/or volume-based fees are used. \textcopyright{} 2007 Elsevier Ltd. All rights reserved.}, - isbn = {0956-053X (Print)\textbackslash r0956-053X (Linking)}, - pmid = {17931849}, - file = {/Users/fabio/Zotero/storage/I73WUL9S/An econometric analysis of regional differences in household waste collection The case of plastic packaging waste in Sweden.pdf} -} - -@article{Hage2009, - title = {Norms and Economic Motivation in Household Recycling: {{Empirical}} Evidence from {{Sweden}}}, - author = {Hage, Olle and S{\"o}derholm, Patrik and Berglund, Christer}, - year = {2009}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {53}, - number = {3}, - pages = {155--165}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2008.11.003} -} - -@article{haggstromFuturesLiteracyBelong2021, - title = {Futures Literacy \textendash{} to Belong, Participate and Act!: {{An Educational}} Perspective}, - author = {H{\"a}ggstr{\"o}m, Margaretha and Schmidt, Catarina}, - year = {2021}, - month = jul, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2021.102813}, - urldate = {2021-07-19} -} - -@article{Hagnell2019, - title = {The Economic and Mechanical Potential of Closed Loop Material Usage and Recycling of Fibre-Reinforced Composite Materials}, - author = {Hagnell, M.K. and Akermo, M.}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.156}, - file = {/Users/fabio/Zotero/storage/X99DF2CW/The economic and mechanical potential of closed loop material usage and recycling of fibre-reinforced composite materials.pdf} -} - -@article{Hague2004, - title = {Materials Analysis of Stereolithography Resins for Use in {{Rapid Manufacturing}}}, - author = {Hague, R. and Mansour, S. and Saleh, N. and Harris, R.}, - year = {2004}, - journal = {Journal of Materials Science}, - volume = {39}, - number = {7}, - pages = {2457--2464}, - issn = {00222461}, - doi = {10.1023/B:JMSC.0000020010.73768.4a}, - abstract = {The use of Rapid Prototyping ( RP) techniques for the production of end-use parts is increasing to a stage where Rapid Manufacturing is being undertaken. This paper documents significant initial investigations into the properties of Accura SI40 and SL7560 resins which represent two state of the art stereolithography resins that are aimed at end-use part manufacture. This information has previously been unavailable and is vital for their consideration in end-use part manufacture. The impact of various levels of post curing ( ultraviolet and thermal) on the tensile, flexural and impact properties are investigated and correlated with differential scanning calorimetry (DSC) analysis. The isotropy/anisotropy nature of the two materials and also the effect of the notch creation method on the impact resistance were also studied. (C) 2004 Kluwer Academic Publishers.}, - file = {/Users/fabio/Zotero/storage/XJDQ6C4N/Hague et al. - 2004 - Materials analysis of stereolithography resins for use in Rapid Manufacturing.pdf} -} - -@article{Hahladakis2018, - title = {Closing the Loop on Plastic Packaging Materials: {{What}} Is Quality and How Does It Affect Their Circularity?}, - author = {Hahladakis, John N. and Iacovidou, Eleni}, - year = {2018}, - month = jul, - journal = {Science of The Total Environment}, - volume = {630}, - pages = {1394--1400}, - issn = {00489697}, - doi = {10.1016/j.scitotenv.2018.02.330}, - file = {/Users/fabio/Zotero/storage/M862XUQV/Closing the loop on plastic packaging materials- What is quality and how does it affect their circularity.pdf} -} - -@article{HaimFaridian2020, - title = {Ambidexterity in the Age of Asset Sharing: {{Development}} of Dynamic Capabilities in Open Source Ecosystems}, - author = {Haim Faridian, Parisa and Neubaum, Donald O.}, - year = {2020}, - month = apr, - journal = {Technovation}, - pages = {102125}, - publisher = {{Elsevier}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2020.102125} -} - -@article{haines-gaddSelfhealingMaterialsPathway2021, - title = {Self-Healing Materials: {{A}} Pathway to Immortal Products or a Risk to Circular Economy Systems?}, - author = {{Haines-Gadd}, Merryn and Charnley, Fiona and {Encinas-Oropesa}, Adriana}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {315}, - pages = {128193}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128193}, - urldate = {2021-08-11}, - abstract = {Product lifetime extension is key strategy for a functioning Circular Economy. Yet, the role of material innovation and how this might contribute to longer product and material lifetimes has not been widely discussed. Considering the significant environmental burden of material resource extraction, the longevity of materials must also be deliberated. Inspired by biological systems, self-healing materials are a type of smart material with the ability to inherently repair themselves when damaged. Although a technology extensively investigated within the material science community, the Circular Economy and product lifetime extension implications of implementing these into products has yet to be debated. Thus, this empirical study investigates: What are the benefits, opportunities, risks and challenges for applying self-healing materials to products within the context of the circular economy? In addition to a literature review, this research was carried out utilising a survey, two round table discussions, a workshop and interviews with industry experts from several different sectors. Through thematic analysis, it was discovered that the key benefits that self-healing materials might offer to circular systems are: the ability to maintain the primary lifetime of the product from both a technical and service lifetime perspective; assistance in the refurbishing and remanufacture of products through increasing the ease of disassembly and reassembly of products; and the potential to enable alternative business models. The key risks and limitations are: issues of persistence within the system; hybridization of materials - technosphere or biosphere? whether they will cycle in the system; limitations regarding their technology development, performance and lastly queries of their liability and compliance. These findings are valuable to both fields of self-healing materials and circular economy, and they not only demonstrate what sustainability factors must be understood when developing novel self-healing compositions but also expand our understanding for how these materials might be utilised to create longer lasting products from an industrial perspective. The paper concludes with a set of recommendations for future research activities which could not only help to advance the field of self-healing but also potentially product longevity and make immortal products a reality.}, - keywords = {Circular design,Material innovation,Product lifetime extension,Product longevity,Self-repair} -} - -@techreport{haines-youngCommonInternationalClassification, - title = {Common {{International Classification}} of {{Ecosystem Services}} ({{CICES}}): {{Consultation}} on {{Version}} 4}, - author = {{Haines-Young}, Roy and Potschin, Marion}, - urldate = {2021-04-13}, - file = {/Users/fabio/Zotero/storage/3XE5GISE/full-text.pdf} -} - -@article{Hajer2015, - ids = {hajer2015}, - title = {Beyond {{Cockpit-ism}}: {{Four Insights}} to {{Enhance}} the {{Transformative Potential}} of the {{Sustainable Development Goals}}}, - author = {Hajer, Maarten and Nilsson, M{\aa}ns and Raworth, Kate and Bakker, Peter and Berkhout, Frans and {de Boer}, Yvo and Rockstr{\"o}m, Johan and Ludwig, Kathrin and Kok, Marcel}, - year = {2015}, - month = feb, - journal = {Sustainability}, - volume = {7}, - number = {2}, - pages = {1651--1660}, - publisher = {{MDPI AG}}, - issn = {2071-1050}, - doi = {10.3390/su7021651}, - abstract = {The Sustainable Development Goals (SDG) have the potential to become a powerful political vision that can support the urgently needed global transition to a shared and lasting prosperity. In December 2014, the United Nations (UN) Secretary General published his report on the SDGs. However, the final goals and targets that will be adopted by the UN General Assembly in September 2015 risk falling short of expectations because of what we call " cockpit-ism": the illusion that top-down steering by governments and intergovernmental organizations alone can address global problems. In view of the limited effectiveness of intergovernmental efforts and questions about the capacity of national governments to affect change, the SDGs need to additionally mobilize new agents of change such as businesses, cities and civil society. To galvanize such a broad set of actors, multiple perspectives on sustainable development are needed that respond to the various motives and logics of change of these different actors. We propose four connected perspectives which can strengthen the universal relevance of the SDGs: " planetary boundaries" to stress the urgency of addressing environmental concerns and to target governments to take responsibility for (global) public goods; " the safe and just operating space" to highlight the interconnectedness of social and environmental concerns and its distributive consequences; " the energetic society" to benefit from the willingness of a broad group of actors worldwide to take action; and " green competition" to stimulate innovation and new business practices. To realize the transformative potential of the SDGs, these four perspectives should be reflected in the focus and content of the SDGs that will be negotiated in the run up to September 2015 and its further implementation.}, - keywords = {Agents of change,Cockpit-ism,Energetic society,Planetary boundaries,Post-2015 agenda,Safe and just operating space,Sustainable development goals}, - file = {/Users/fabio/Zotero/storage/IV6U3PBK/Beyond cockpit-ism- Four insights to enhance the transformative potential of the sustainable development goals.pdf} -} - -@article{Hajiaghaei-Keshteli2019, - title = {Sustainable Closed-Loop Supply Chain Network Design with Discount Supposition}, - author = {{Hajiaghaei-Keshteli}, Mostafa and Fathollahi Fard, Amir Mohammad}, - year = {2019}, - month = sep, - journal = {Neural Computing and Applications}, - volume = {31}, - number = {9}, - pages = {5343--5377}, - issn = {0941-0643}, - doi = {10.1007/s00521-018-3369-5} -} - -@article{haklayCitizenSciencePostNormal2023, - title = {Citizen Science and {{Post-Normal Science}}'s Extended Peer Community: {{Identifying}} Overlaps by Mapping Typologies}, - shorttitle = {Citizen Science and {{Post-Normal Science}}'s Extended Peer Community}, - author = {Haklay, Mordechai and K{\"o}nig, Ariane and Moustard, Fabien and Aspee, Nicolle}, - year = {2023}, - month = jun, - journal = {Futures}, - volume = {150}, - pages = {103178}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2023.103178}, - urldate = {2023-05-31}, - abstract = {At first sight, citizen science \textendash{} the opening of scientific enterprise to a wider group of people, many of whom are not professionally engaged in research institutions, seems to align well with the concept of an extended peer community of the framework of Post-Normal Science (PNS). PNS is concerned with the social robustness of applied science, science-based professional consultancy, and scientific advice for policy in situations of high stakes, high uncertainties, and contested values. Creating opportunities for engagement of citizens in science seems an obvious fit \textendash{} but is that true for all diverse forms that citizen science can take? Current citizen science includes many types of activities and practices. As a result, the role of the participants within a given scientific knowledge production practice and their relation to scientists vary. This paper leverages the PNS framework to gain a more in-depth understanding of different ways in which diverse citizen science initiatives can contribute to improving the science-policy interface and provide tool sets and approaches for extended peer review, or not. For this purpose, this paper develops an analytic framework drawing on several widely used typologies of citizen science. The twenty four activities and practices of citizen science that they cover are mapped onto different zones of problem solving strategies \textendash{} applied science, professional consultancy, and post-normal science, which are presented in the literature on PNS in terms of uncertainty and decision stakes while also noticing their value conflicts and urgency. The analysis shows that each of the four zones of scientific activities can be associated with citizen science initiatives. We deduce that citizen science is not automatically imbued with transformative potential, but that this potential depends on the purpose and design of the citizen science initiative. Certain types of citizen science activities and approaches are more relevant to researchers and practitioners with an interest in PNS who are actively seeking to reconfigure the science-policy-practice interface than others. This analytic framework and consequent mapping can support PNS practitioners in identifying the type of citizen science activities and designing fit-for-purpose initiatives. Moreover, the mapping exercise conveys a more nuanced understanding of different possible dimensions, merits, and limitations of the extended peer community concept. Similarly, for citizen science researchers and practitioners, the mapping of typologies within the three~zones of problem solving strategies can allow a better selection of citizen science activities for those purposes.}, - langid = {english}, - keywords = {Citizen science,Community science,DIY science,Post-normal science,Typologies}, - file = {/Users/fabio/Zotero/storage/SFWIZYBN/Haklay et al. - 2023 - Citizen science and Post-Normal Science’s extended.pdf;/Users/fabio/Zotero/storage/KEHSTAW5/S0016328723000824.html} -} - -@article{halbrecht3DPrintedSpacer2023, - title = {{{3D Printed Spacer Fabrics}}}, - author = {Halbrecht, Anat and Kinsbursky, Maayan and Poranne, Roi and Sterman, Yoav}, - year = {2023}, - month = mar, - journal = {Additive Manufacturing}, - volume = {65}, - pages = {103436}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2023.103436}, - urldate = {2023-02-12}, - abstract = {Spacer fabrics are three-dimensional textiles composed of two fabric layers and a filler yarn that connects the outer layers, while maintaining some distance between them. Spacer fabrics are favorable thanks to their soft, breathable, and elastic properties. Indeed, they are prevalent in a variety of products such as bags, footwear, and protective equipment. Spacer fabrics are usually knitted on large and expensive double-needle bar warp knitting machines. These machines can produce spacer fabrics in a variety of thicknesses, patterns, and densities. However, they are limited in their potential to modulate these parameters within a single knitted fabric. Our goal is to develop a non-uniform 3D printed metamaterial analogous to knitted spacer fabrics, which we refer to as 3D Printed Spacer Fabrics (3DSF). We produce these fabrics using desktop 3D printers and off-the-shelf Thermoplastic Polyurethane (TPU) filament. 3DSF exhibits nonlinear compression behavior due to the construction of the filler strands between the faces. We provide a design tool that enables controlling different geometry and printing parameters of the 3DSF, for tuning the dimensions, appearance, and compression of the material. To evaluate how the different parameters affect the compression behavior, we conduct a series of compression tests. The results show that the compression behavior can be tuned to fit specific applications. Finally, we suggest two use cases: biker shorts and a knee pad that uses the 3DSF for padding.}, - langid = {english}, - keywords = {3D printed fabrics,G-code manipulation,Material extrusion,Metamaterials,Spacer fabrics}, - file = {/Users/fabio/Zotero/storage/GIFVSKI4/Halbrecht et al_2023_3D Printed Spacer Fabrics.pdf;/Users/fabio/Zotero/storage/PC4KQPBY/S2214860423000490.html} -} - -@article{Halder2018, - title = {Predictors of Recycling Intentions among the Youth: {{A}} Developing Country Perspective}, - author = {Halder, Pradipta and Singh, Harminder}, - year = {2018}, - month = aug, - journal = {Recycling}, - volume = {3}, - number = {3}, - pages = {38}, - publisher = {{MDPI AG}}, - issn = {23134321}, - doi = {10.3390/recycling3030038}, - urldate = {2020-03-12}, - abstract = {India is currently facing a mounting challenge related to municipal waste management, due to an increasing urban population, and their high consumption lifestyles. India also has the world's highest number of young people in the 10\textendash 24 years age group. The study applied the theory of planned behaviour (TPB) model to predict school students' recycling intentions in Delhi, the capital of India and one of the highest producers of municipal solid wastes in the country. Data were collected from a school in New Delhi and the sample size consisted of 272 students from 9th and 10th grades. The TPB model explained 56\% of the variance in the students' intentions to recycling. The predictor `subjective norm' appeared to have the strongest impact on the students' recycling intentions, followed by `attitude' and `perceived behavioural control'. It indicated that social factors are driving the Indian youth's recycling intentions. It is important that the policymakers promote recycling as a social trend in India and provide adequate facilities to the public so that they can participate in recycling activities without facing difficulties. Schools also have a role in increasing students' awareness of recycling and motivating them to participate in household waste management practices.}, - keywords = {India,Intentions,Recycling,Theory of planned behaviour,Youth}, - file = {/Users/fabio/Zotero/storage/KFNA77M4/full-text.pdf} -} - -@article{Hall2019, - title = {Nonverbal {{Communication}}}, - author = {Hall, Judith A. and Horgan, Terrence G. and Murphy, Nora A.}, - year = {2019}, - month = jan, - journal = {Annual Review of Psychology}, - volume = {70}, - number = {1}, - pages = {271--294}, - issn = {0066-4308}, - doi = {10.1146/annurev-psych-010418-103145}, - abstract = {The field of nonverbal communication (NVC) has a long history involving many cue modalities, including face, voice, body, touch, and interpersonal space; different levels of analysis, including normative, group, and individual differences; and many substantive themes that cross from psychology into other disciplines. In this review, we focus on NVC as it pertains to individuals and social interaction. We concentrate specifically on ( a) the meanings and correlates of cues that are enacted (sent) by encoders and ( b) the perception of nonverbal cues and the accuracy of such perception. Frameworks are presented for conceptualizing and understanding the process of sending and receiving nonverbal cues. Measurement issues are discussed, and theoretical issues and new developments are covered briefly. Although our review is primarily oriented within social and personality psychology, the interdisciplinary nature of NVC is evident in the growing body of research on NVC across many areas of scientific inquiry.} -} - -@article{hallgrenReDesignAdditive2016, - title = {({{Re}}){{Design}} for {{Additive Manufacturing}}}, - author = {H{\"a}llgren, Sebastian and Pejryd, Lars and Ekengren, Jens}, - year = {2016}, - journal = {Procedia CIRP}, - volume = {50}, - pages = {246--251}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2016.04.150}, - urldate = {2021-01-12}, - abstract = {3D-printing has been used to create prototypes during the development phase for more than 20 years. Now, functional parts can be printed directly in specific metal powders using similar layer-by-layer techniques. The additive method is unlike traditional mass production manufacturing methods in many ways, creating new possibilities for designers to realise new and different design ideas previously impossible to manufacture. When products are mass produced, there is a desire to improve manufacturability. This is traditionally done by a designer with knowledge about certain manufacturing methods altering design choices to make it cheaper to manufacture. This paper shows different design for AM (DfAM) methods where performance and part cost are both of interest. It adds to existing research by classifying design for additive manufacturing in two different classes; process-driven and designer-driven shaping of parts. A cost-prediction model for Selective Laser Melting (SLM) printed parts is suggested as an initial step to choose parts for redesign from an economical perspective. A case study of a missile launcher beam redesigned for additive manufacturing using three different approaches is presented. Differences and similarities in design methods are discussed and the redesigned parts are compared for mass and cost. It is shown that redesigning for AM can reduce mass but depending on part size and print speed, the part can become more expensive than the original design, creating a need to know the customer value of what the redesigned part provides, in this case, the value of reduced mass.}, - keywords = {Additive manufacturing,design,DfAM,lattices,Powder Bed Fusion,topology optimisation}, - file = {/Users/fabio/Zotero/storage/6YS946QH/full-text.pdf} -} - -@article{Hallinger2020, - title = {A Bibliometric Review of Research on Simulations and Serious Games Used in Educating for Sustainability, 1997\textendash 2019}, - author = {Hallinger, Philip and Wang, Ray and Chatpinyakoop, Chatchai and Nguyen, Vien-Thong and Nguyen, Uyen-Phuong}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {256}, - pages = {120358}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120358} -} - -@article{Halverson2014, - title = {The {{Maker Movement}} in {{Education}}}, - author = {Halverson, Erica Rosenfeld and Sheridan, Kimberly M.}, - year = {2014}, - journal = {Harvard Educational Review}, - volume = {84}, - number = {4}, - pages = {495--504,563,565}, - issn = {00178055}, - doi = {10.17763/haer.84.4.34j1g68140382063}, - abstract = {In this essay, Erica Halverson and Kimberly Sheridan provide the context for research on the maker movement as they consider the emerging role of making in education. The authors describe the theoretical roots of the movement and draw connections to related research on formal and informal education. They present points of tension between making and formal education practices as they come into contact with one another, exploring whether the newness attributed to the maker movement is really all that new and reflecting on its potential pedagogical impacts on teaching and learning.}, - isbn = {00178055}, - file = {/Users/fabio/Zotero/storage/QFECYGF3/The Maker Movement in Education.pdf} -} - -@article{Hamad2010, - title = {Effect of Recycling on Rheological and Mechanical Properties of Poly(Lactic Acid)/Polystyrene Polymer Blend}, - author = {Hamad, Kotiba and Kaseem, Mosab and Deri, Fawaz}, - year = {2010}, - month = dec, - journal = {Journal of Materials Science}, - volume = {46}, - number = {9}, - pages = {3013--3019}, - issn = {0022-2461}, - doi = {10.1007/s10853-010-5179-8}, - urldate = {2014-07-15}, - file = {/Users/fabio/Zotero/storage/73CNCGMK/Effect of recycling on rheological and mechanical properties of poly(lactic acid)polystyrene polymer blend.pdf} -} - -@article{Hamad2013, - title = {Recycling of Waste from Polymer Materials: {{An}} Overview of the Recent Works}, - author = {Hamad, Kotiba and Kaseem, Mosab and Deri, Fawaz}, - year = {2013}, - month = dec, - journal = {Polymer Degradation and Stability}, - volume = {98}, - number = {12}, - pages = {2801--2812}, - publisher = {{Elsevier Ltd}}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2013.09.025}, - urldate = {2014-07-15}, - file = {/Users/fabio/Zotero/storage/6WYNZWAP/Recycling of waste from polymer materials An overview of the recent works.pdf} -} - -@article{hamantPlantScientistsCan2020, - title = {Plant Scientists Can't Ignore {{Jevons}} Paradox Anymore}, - author = {Hamant, Olivier}, - year = {2020}, - month = jul, - journal = {Nature Plants 2020 6:7}, - volume = {6}, - number = {7}, - pages = {720--722}, - publisher = {{Nature Publishing Group}}, - issn = {2055-0278}, - doi = {10.1038/s41477-020-0722-3}, - urldate = {2022-01-15}, - abstract = {Although the `rebound effect' is well established in environmental economics, the sometimes paradoxical effects of yield increase are rarely questioned within the plant science community. Acknowledging the curse of efficiency can help us to reframe our societal goals from performance at all cost to resilience.}, - pmid = {32665648}, - keywords = {Agriculture,Business and industry,Environmental sciences,Genetic engineering,Plant sciences} -} - -@techreport{hamiltonPlasticClimateHidden2019, - title = {Plastic \& {{Climate}}: {{The}} Hidden Costs of a Plastic Planet | {{Policy Commons}}}, - author = {Hamilton, Lisa Anne and Steven, Feit}, - year = {2019}, - institution = {{Center for International Environmental Law}}, - urldate = {2022-09-13}, - file = {/Users/fabio/Zotero/storage/UEZG5TJP/3507468.html} -} - -@article{Han2020, - title = {Optimal Recovery Strategy of Manufacturers: {{Remanufacturing}} Products or Recycling Materials?}, - author = {Han, Xiaohua and Shen, Ying and Bian, Yiwen}, - year = {2020}, - month = jul, - journal = {Annals of Operations Research}, - volume = {290}, - number = {1-2}, - pages = {463--489}, - issn = {0254-5330}, - doi = {10.1007/s10479-018-2929-5} -} - -@article{hanDeterminantsEcoinnovationAdoption2021, - title = {Determinants of Eco-Innovation Adoption of Small and Medium Enterprises: {{An}} Empirical Analysis in {{Myanmar}}}, - author = {Han, Myat Su and Chen, Weiming}, - year = {2021}, - doi = {10.1016/j.techfore.2021.121146}, - urldate = {2021-09-15}, - keywords = {Eco-innovation adoption,Firm innovation capabilities}, - file = {/Users/fabio/Zotero/storage/K7M8UVB3/full-text.pdf} -} - -@article{Haner2005, - title = {Spaces for {{Creativity}} and {{Innovation}} in {{Two Established Organizations}}}, - author = {Haner, Udo-Ernst}, - year = {2005}, - journal = {Creativity and Innovation Management}, - volume = {14}, - number = {3}, - pages = {288--298}, - issn = {0963-1690}, - doi = {10.1111/j.1476-8691.2005.00347.x}, - abstract = {Organizational work environments are increasingly strategically designed to support creativity and innovation processes, although a consistent theoretical frame for such an endeavour has not been developed yet. Creativity- and innovation-oriented design of work environments requires an understanding of the principles of the underlying processes and their spatial implications. Both creativity and innovation processes are complex and display in different phases convergent and divergent characteristics. The processes are dependent on both individual and group effort. In this article these dimensions are discussed from a theoretical perspective and are used for evaluating the two cases presented here. The first case, the Interactive Creativity Landscape as integral part of the Fraunhofer Office Innovation Center in Germany has been designed interpreting the convergent and divergent phases of creative processes. The second case, the Learning Garden of a Scandinavian financial institution has been designed having de Bono's procedure in mind. The article concludes with the suggestion that increasingly organizations will offer diversity for spatially supporting creativity and innovation processes; solutions will be manifold but will follow certain principles - some of which are discussed here.}, - isbn = {09631690}, - pmid = {18096733} -} - -@article{Hanes2015, - title = {Process to Planet: {{A}} Multiscale Modeling Framework toward Sustainable Engineering}, - author = {Hanes, Rebecca J. and Bakshi, Bhavik R.}, - year = {2015}, - month = oct, - journal = {AIChE Journal}, - volume = {61}, - number = {10}, - pages = {3332--3352}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1547-5905}, - doi = {10.1002/AIC.14919}, - urldate = {2021-09-06}, - abstract = {To prevent the chance of unintended environmental harm, engineering decisions need to consider an expanded boundary that captures all relevant connected systems. Comprehensive models for sustainable engineering may be developed by combining models at multiple scales. Models at the finest "equipment" scale are engineering models based on fundamental knowledge. At the intermediate "value chain" scale, empirical models represent average production technologies, and at the coarsest "economy" scale, models represent monetary and environmental exchanges for industrial sectors in a national or global economy. However, existing methods for sustainable engineering design ignore the economy scale, while existing methods for life cycle assessment do not consider the equipment scale. This work proposes an integrated, multiscale modeling framework for connecting models from process to planet and using them for sustainable engineering applications. The proposed framework is demonstrated with a toy problem, and potential applications of the framework including current and future work are discussed.}, - keywords = {design,mathematical modeling,multiscale modeling,optimization,sustainability}, - file = {/Users/fabio/Zotero/storage/CF7JBUVL/Hanes, Bakshi - 2015 - Process to planet A multiscale modeling framework toward sustainable engineering.pdf} -} - -@article{Hanes2015a, - title = {Sustainable Process Design by the Process to Planet Framework}, - author = {Hanes, Rebecca J and Bakshi, Bhavik R}, - year = {2015}, - journal = {AIChE Journal}, - volume = {61}, - number = {10}, - pages = {3320--3331}, - issn = {15475905}, - doi = {10.1002/aic.14918}, - urldate = {2021-09-06}, - abstract = {Sustainable process design (SPD) problems combine a process design problem with life cycle assessment (LCA) to optimize process economics and life cycle environmental impacts. While SPD makes use of recent advances in process systems engineering and optimization, its use of LCA has stagnated. Currently, only process LCA is utilized in SPD, resulting in designs based on incomplete and potentially inaccurate life cycle information. To address these shortcomings, the multiscale process to planet (P2P) modeling framework is applied to formulate and solve the SPD problem. The P2P framework offers a more comprehensive analysis boundary than conventional SPD and greater modeling detail than advanced LCA methodologies. Benefits of applying this framework to SPD are demonstrated with an ethanol process design case study. Results show that current methods shift emissions outside the analysis boundary, while applying the P2P modeling framework results in environmentally superior process designs. Future extensions of the P2P framework are discussed.}, - keywords = {Design,Green engineering,Optimization,Process,Simulation}, - file = {/Users/fabio/Zotero/storage/MKHXRU5C/full-text.pdf} -} - -@article{Hankammer2019, - title = {Towards Circular Business Models: {{Identifying}} Consumer Needs Based on the Jobs-to-Be-Done Theory}, - author = {Hankammer, Stephan and Brenk, Sebastian and Fabry, Hannah and Nordemann, Anne and Piller, Frank T.}, - year = {2019}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {231}, - pages = {341--358}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.165}, - urldate = {2020-03-22}, - abstract = {Non-renewable resources form one of the boundaries of our current linear-growth model. Moving from product-oriented to product-service systems (PSS)-based business models may contribute to the circularity of resource flows while strengthening the competitive advantage of organizations. Scholars have been studying the win-win potential of circular business models from a strategic business perspective for some time. However, methods for increasing consumer participation in circular economy (CE)-linked PSSs are yet to be studied intensively. This is particularly problematic because consumers play a significant and active role in the success of closing material loops. We sought to contribute to the closure of this research gap with a case study, in which we use a mixed-method approach inspired by the outcome-driven innovation (ODI) approach. ODI aims to detect innovation potential based on the job-to-be-done theory at the fuzzy front end of innovation. This indicates user-centric connection points for new value proposition development for circular business models. In our case study of the consumer electronics industry, we exemplify how insights about consumer needs along the lifecycle of a TV can be derived. We first interviewed a sample of consumers in order to qualitatively analyze and identify the problems they currently face when trying to solve an entertainment interruption. This revealed 30 consumer needs. In a second step, we evaluated these needs in a survey to quantify their potential according to the degree of importance and satisfaction associated with each. Our analysis revealed that 11 of the 30 needs are currently not well satisfied. These needs are linked as innovation opportunities to potential PSSs, providing a foundation for customer-centric value propositions design to foster the implementation of the CE. Our study not only advances the understanding of consumer need-orientation in CE literature, but also yields valuable contributions to the methodological repertoire for customer-centric innovation management in the CE context. Additionally, it outlines directions for further research on refining ODI for the purpose of connecting individual consumer needs with societal needs.}, - keywords = {Circular economy,Jobs-to-be-done theory,Outcome-driven innovation,Product-service systems,Sustainable business models,Sustainable value proposition} -} - -@article{Hansen2020, - title = {From {{Idea}} to {{Production}}: {{A Retrospective}} and {{Longitudinal Case Study}} of {{Prototypes}} and {{Prototyping Strategies}}}, - author = {Hansen, Camilla Arndt and {\"O}zkil, Ali G{\"u}rcan}, - year = {2020}, - month = mar, - journal = {Journal of Mechanical Design}, - volume = {142}, - number = {3}, - publisher = {{ASME International}}, - issn = {1050-0472}, - doi = {10.1115/1.4045385}, - urldate = {2021-02-16}, - abstract = {This study explores the value of visualizing the prototyping activities in a new product development process from idea to production. Through a case study of a hardware startup, we present a retrospective and longitudinal study of their prototyping processes, from early idea to the introduction of several product generations to market. We call the visualization technique ProtoMapping, and we use the qualitative and quantitative data captured by the ProtoMap to understand how prototyping strategies change over the course of product development processes. Specifically, we focus on the prototyping of parallel concepts, iterations of concepts, manufacturing processes used for prototypes, prototype media, prototype tests, as well as prototyping of isolated or integrated systems. On the basis of this longitudinal analysis, we present a number of insights that were possible to uncover with ProtoMapping. We observe how parallel prototypes of isolated systems can be used to explore the solution space and later be synthesized into prototypes for integrated systems. Furthermore, we understand how the need to scale up production can lead to increased prototyping activities, as several parts of a product must be redesigned. This study illustrates the utility of a retrospective visualization approach and serves as the first step in formulation of generalized guidelines for prototyping strategies in holistic product development.}, - keywords = {Cycles,design evaluation,design process,design representation,design visualization,Engineering prototypes,product design,product development,prototyping}, - file = {/Users/fabio/Zotero/storage/DHKWDNZV/Hansen, Gu - 2020 - From Idea to Production A Retrospective and Longitudinal Case Study of Prototypes and Prototyping Strategies.pdf} -} - -@article{Hao2010, - title = {Enhancing the Sustainability of Additive Manufacturing}, - author = {Hao, Liang and Raymond, David and Strano, Giovanni and Dadbakhsh, Sasan}, - year = {2010}, - journal = {5th International Conference on Responsive Manufacturing - Green Manufacturing (ICRM 2010)}, - pages = {390--395}, - doi = {10.1049/cp.2010.0462}, - abstract = {Additive Manufacturing (AM) produces three dimensional objects directly from a digital model by the successive addition of material(s), without the use of a specialized tooling. AM allows the rapid development of sustainable products and has been increasingly used to produce lightweight components to save materials and costs. This particularly helps to save a considerable amount of material, energy and cost for the production of one-off or small volume products. In addition, the non-processed raw materials can be recycled and re-used by AM to reduce material waste drastically. AM is therefore considered as a sustainable manufacturing approach driving the rapid development of new products. The paper will present and review the research activities performed in the University of Exeter to enhance the sustainability of AM. These research activities include: 1) sustainable product design by optimising internal lightweight structures; 2) improvement of process efficiency by optimising AM process parameters; 3) reduction of energy consumption by in situ thermite material reaction; 4) sustainable production of personalised chocolates.}, - isbn = {978-1-84919-199-9}, - keywords = {additive manufacturing,lightweight structure,process,sustainability}, - file = {/Users/fabio/Zotero/storage/ZM4RRV4M/Hao et al. - 2010 - Enhancing the sustainability of additive manufacturing.pdf} -} - -@article{haoCoevolutionMechanismStakeholder2022, - ids = {2022}, - title = {The Coevolution Mechanism of Stakeholder Strategies in the Recycled Resources Industry Innovation Ecosystem: The View of Evolutionary Game Theory}, - shorttitle = {The Coevolution Mechanism of Stakeholder Strategies in the Recycled Resources Industry Innovation Ecosystem}, - author = {Hao, Xinyu and Liu, Guangfu and Zhang, Xiaoling and Dong, Liang}, - year = {2022}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {179}, - pages = {121627}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.121627}, - urldate = {2022-08-05}, - abstract = {The recycled resources industry (RRI) is considered one of the pillars for sustainable development. Few studies to date have evaluated the innovation regime in RRI, although it is one of the dilemmas that RRI is facing. Therefore, including ``Government,'' ``Enterprise,'' and ``University-Research institute'' in the evolutionary game model, this paper draws on innovation ecosystem theory and conducts a mechanism analysis to clarify the evolutionary stability of stakeholder strategies in the RRI. The findings highlight six potential Evolutionary Stable Strategies (ESS), with which the `ideal state' can be achieved. Moreover, with and without the subsidy policy, the strategic choices of players are differently interdependent, the divergent factors and the influencing mechanisms to the main stakeholders are identified, and the transmission effect of the influence is found. What's more, a subsidy policy would promote active cooperation between these stakeholders when the subsidy quota is within an appropriate range. This paper unpacks the evolution mechanism black box from the stakeholders' perspective, which provides a clearer understanding of the evolutionary dynamics of industrial innovation ecosystems. The critical findings also provide evidence for policymakers to facilitate the coevolution of the agents in the innovation ecosystem, thereby improving the overall innovation ability of the RRI.}, - langid = {english}, - keywords = {evolutionary game model,innovation ecosystem,Recycled resources industry,strategy choice}, - file = {/Users/fabio/Zotero/storage/SVLCUT5G/Hao et al_2022_The coevolution mechanism of stakeholder strategies in the recycled resources.pdf;/Users/fabio/Zotero/storage/A2L4ZY5V/S0040162522001597.html} -} - -@article{haoPolycentricGovernanceWaste2023, - title = {Polycentric Governance in Waste Management: {{A}} Mechanism Analysis of Actors' Behavior Evolution at the Community Level}, - shorttitle = {Polycentric Governance in Waste Management}, - author = {Hao, Xinyu and Dong, Liang and Liu, Guangfu and Zhang, Xiaoling}, - year = {2023}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {191}, - pages = {106879}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.106879}, - urldate = {2023-02-12}, - abstract = {Polycentric waste governance (PWG) is novel approach to handling the increasing waste by embracing broader stakeholders, compared to isolated public service. This paper sought to unpack the strategic coevolution mechanism of PWG's main stakeholders at community level by evolutionary game theory. Our findings highlighted that ``Recycler'' ultimately chooses active participation while ``Community'' and ``Householder'' are on the fence. In addition, the transmission effect existed in the interplays among three agents. Our modeling analysis also echoed the ``tragedy of the commons'' and market failure in the theoretical landscape of PWG. Thus, the countermeasures, including community engagement, public perception, innovative ``Government-Market'' cooperation mode, etc., deserved attention. Uncovering the `black box' of the PWG model, an enhanced understanding of governance actors' strategic evolution mechanism for improving the PWG theory is obtained thus far. The research findings would expect to enlighten the practice of PWG in reality, thereby mitigating the dilemma of ``waste siege.''}, - langid = {english}, - keywords = {Community level,Polycentric governance,{Strategy evolution, evolutionary game analysis},Waste management}, - file = {/Users/fabio/Zotero/storage/Y92CYFPL/Hao et al_2023_Polycentric governance in waste management.pdf;/Users/fabio/Zotero/storage/Y9L5R2Q3/S0921344923000162.html} -} - -@article{hapuwatteClosedloopSustainableProduct2021, - title = {Closed-Loop Sustainable Product Design for Circular Economy}, - author = {Hapuwatte, Buddhika M. and Jawahir, I. S.}, - year = {2021}, - month = dec, - journal = {Journal of Industrial Ecology}, - volume = {25}, - number = {6}, - pages = {1430--1446}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13154}, - urldate = {2022-01-25}, - abstract = {Intensifying global consumption stipulates the use of sustainable manufacturing and circular economy concepts to make products while managing available finite resources. Designers must be equipped to design products considering the economic, environmental, and social impacts of the product life cycle. This paper explores product design in relation to sustainability and circularity principles, presents fundamental concepts, sets definitions, and proposes a new methodology to incorporate these two principles. This new methodology synthesizes elements of design for sustainability and circularity. The primary stakeholder categories are updated to explicitly include ``society-at-large''\textemdash a neglected category in typical manufacturer-focused sustainability evaluations. Sustainability elements based on the total life cycle approach, including triple bottom line, life cycle perspective, 6Rs, and perpetual resource flow, are integrated with the circular design elements of resource conservation, product-life extension, and circularity compliance to create the novel closed-loop sustainable product design methodology. The metrics-based product evaluation framework presented compels designers to integrate sustainability and circularity elements in the designed products. Sustainability concerns of the product life cycle are evaluated for both negative and positive impacts to identify the value created for all primary stakeholders (i.e., manufacturers, users, and society-at-large). This methodology promotes a holistic view of the product life cycle, including end-of-life activity planning, leading to a perpetual resource flow. Performance influencing parameters available for designers are also examined, including the overlooked ``dedicated'' and ``incidental'' process-induced types, providing a strong basis for future research on product sustainability predictive models.}, - keywords = {circular economy,closed,industrial ecology,loop,product design,stakeholder value,sustainable manufacturing}, - file = {/Users/fabio/Zotero/storage/YXNSIYQV/full-text.pdf} -} - -@article{haqueProspectMicroplasticPollution2022, - ids = {haque2022a}, - title = {Prospect of Microplastic Pollution Control under the ``{{New}} Normal'' Concept beyond {{COVID-19}} Pandemic}, - author = {Haque, Fatima and Fan, Chihhao}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {367}, - pages = {133027}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133027}, - urldate = {2022-07-23}, - abstract = {Coronavirus disease (COVID-19) has led to increasing demand for single-use plastic which aggravates the already existing plastic waste problem. Not only does the demand for personal protective equipment (PPE) increase, but also people shift their preference to online shopping and food delivery to comply with administrative policies for COVID-19 pandemic control. The used PPEs, packaging materials, and food containers may not be handled or recycled properly after their disposal. As a result, the mismanaged plastic waste is discharged into the environment and it may pose even greater risks after breaking into smaller fragments, which was regarded as the source of secondary microplastics (MPs, {$<$} 5~mm) or nanoplastics (NPs, {$<$} 1~{$\mu$}m). The main objective of this manuscript is to provide a review of the studies related to microplastic release due to pandemic-associated plastic waste. This study summarizes the limited work published on the ecotoxicological/toxicological effect of MPs/NPs released from PPE on aquatic organisms, soil organisms, as well as humans. Given the current status of research on MPs from COVID-related plastic waste, the immediate research directions needed on this topic were discussed.}, - langid = {english}, - keywords = {COVID-19,Microplastics,Pandemic waste,Single-use plastic}, - file = {/Users/fabio/Zotero/storage/BV2DI38X/Haque_Fan_2022_Prospect of microplastic pollution control under the “New normal” concept.pdf;/Users/fabio/Zotero/storage/J8US3ECF/S0959652622026191.html} -} - -@misc{haqueThinkThisMost2022, - title = {"{{I}} Think This Is the Most Disruptive Technology": {{Exploring Sentiments}} of {{ChatGPT Early Adopters}} Using {{Twitter Data}}}, - shorttitle = {"{{I}} Think This Is the Most Disruptive Technology"}, - author = {Haque, Mubin Ul and Dharmadasa, Isuru and Sworna, Zarrin Tasnim and Rajapakse, Roshan Namal and Ahmad, Hussain}, - year = {2022}, - month = dec, - number = {arXiv:2212.05856}, - eprint = {2212.05856}, - primaryclass = {cs}, - publisher = {{arXiv}}, - urldate = {2023-01-15}, - abstract = {Large language models have recently attracted significant attention due to their impressive performance on a variety of tasks. ChatGPT developed by OpenAI is one such implementation of a large, pre-trained language model that has gained immense popularity among early adopters, where certain users go to the extent of characterizing it as a disruptive technology in many domains. Understanding such early adopters' sentiments is important because it can provide insights into the potential success or failure of the technology, as well as its strengths and weaknesses. In this paper, we conduct a mixed-method study using 10,732 tweets from early ChatGPT users. We first use topic modelling to identify the main topics and then perform an in-depth qualitative sentiment analysis of each topic. Our results show that the majority of the early adopters have expressed overwhelmingly positive sentiments related to topics such as Disruptions to software development, Entertainment and exercising creativity. Only a limited percentage of users expressed concerns about issues such as the potential for misuse of ChatGPT, especially regarding topics such as Impact on educational aspects. We discuss these findings by providing specific examples for each topic and then detail implications related to addressing these concerns for both researchers and users.}, - archiveprefix = {arxiv}, - keywords = {Computer Science - Computation and Language}, - file = {/Users/fabio/Zotero/storage/6486P7KD/Haque et al. - 2022 - I think this is the most disruptive technology .pdf;/Users/fabio/Zotero/storage/8IL35X6C/2212.html} -} - -@article{harderAreThoseReally2021, - title = {Are Those Really Transformative Learning Outcomes? {{Validating}} the Relevance of a Reliable Process}, - author = {Harder, Marie K. and Dike, Felix O. and Firoozmand, Firooz and des Bouvrie, Nicole and Masika, Rachel J.}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {285}, - pages = {125343}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125343}, - urldate = {2020-12-21} -} - -@article{Hardisty2019, - title = {A Carbon Price by Another Name May Seem Sweeter: {{Consumers}} Prefer Upstream Offsets to Downstream Taxes}, - author = {Hardisty, David J. and Beall, Alec T. and Lubowski, Ruben and Petsonk, Annie and {Romero-Canyas}, Rainer}, - year = {2019}, - month = aug, - journal = {Journal of Environmental Psychology}, - pages = {101342}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2019.101342} -} - -@article{Harris2008, - title = {Improving Mechanical Performance of Injection Molded {{PLA}} by Controlling Crystallinity}, - author = {Harris, Angela M and Lee, Ellen C}, - year = {2008}, - month = feb, - journal = {Journal of Applied Polymer Science}, - volume = {107}, - number = {4}, - pages = {2246--2255}, - issn = {00218995}, - doi = {10.1002/app.27261}, - urldate = {2014-10-21}, - keywords = {crystallization,injection molding,nucleation}, - file = {/Users/fabio/Zotero/storage/BVQUV6GU/Harris, Lee - 2008 - Improving mechanical performance of injection molded PLA by controlling crystallinity.pdf} -} - -@article{Harris2010, - title = {Heat and Humidity Performance of Injection Molded {{PLA}} for Durable Applications}, - author = {Harris, Angela M and Lee, Ellen C}, - year = {2010}, - month = feb, - journal = {Journal of Applied Polymer Science}, - volume = {115}, - number = {3}, - pages = {1380--1389}, - issn = {00218995}, - doi = {10.1002/app.30815}, - urldate = {2014-10-21}, - keywords = {biopolymers,conditioning,crystallization,durability,injection molding}, - file = {/Users/fabio/Zotero/storage/SYULS47R/Harris, Lee - 2010 - Heat and humidity performance of injection molded PLA for durable applications.pdf} -} - -@article{Harrison2018, - title = {Selecting Methods for Ecosystem Service Assessment: {{A}} Decision Tree Approach}, - author = {Harrison, Paula A. and Dunford, Rob and Barton, David N. and Kelemen, Eszter and {Mart{\'i}n-L{\'o}pez}, Berta and Norton, Lisa and Termansen, Mette and Saarikoski, Heli and Hendriks, Kees and {G{\'o}mez-Baggethun}, Erik and Cz{\'u}cz, B{\'a}lint and {Garc{\'i}a-Llorente}, Marina and Howard, David and Jacobs, Sander and Karlsen, Martin and Kopperoinen, Leena and Madsen, Andes and Rusch, Graciela and Van Eupen, Michiel and Verweij, Peter and Smith, Ron and Tuomasjukka, Diana and Zulian, Grazia}, - year = {2018}, - month = feb, - journal = {Ecosystem Services}, - volume = {29}, - pages = {481--498}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.09.016}, - urldate = {2021-04-23}, - abstract = {A range of methods are available for assessing ecosystem services. Methods differ in their aims; from mapping and modelling the supply and demand of ecosystem services to appraising their economic and non-economic importance through valuation techniques. Comprehensive guidance for the selection of appropriate ecosystem service assessment methods that address the requirements of different decision-making contexts is lacking. This paper tackles this gap using the experience from 27 case studies which applied different biophysical, socio-cultural and monetary valuation methods to operationalise the ecosystem service concept towards sustainable land, water and urban management. A survey of the reasons why the case study teams selected particular methods revealed that stakeholder-oriented reasons, such as stakeholder participation, inclusion of local knowledge and ease of communication, and decision-oriented reasons, such as the purpose of the case study and the ecosystem services at stake, were key considerations in selecting a method. Pragmatic reasons such as available data, resources and expertise were also important factors. This information was used to develop a set of linked decision trees, which aim to provide guidance to researchers and practitioners in choosing ecosystem service assessment methods that are suitable for their context.}, - keywords = {Biophysical,Decision trees,Guidance,Method,Monetary,Socio-cultural,Tool}, - file = {/Users/fabio/Zotero/storage/U9E5QMAR/Harrison et al. - 2018 - Selecting methods for ecosystem service assessment A decision tree approach.pdf} -} - -@article{Hart1999, - title = {The Literature Review in Research}, - author = {Hart, C}, - year = {1999}, - journal = {Doing a literature review}, - pages = {1--25}, - issn = {1472-0701}, - doi = {erger}, - abstract = {Intro chapter}, - arxiv = {egerg}, - isbn = {9780761959755}, - pmid = {14834002}, - keywords = {literature reviews,research skills}, - file = {/Users/fabio/Zotero/storage/WMU8GHRS/The literature review in research.pdf} -} - -@article{Hart2018, - title = {Recycling Meal-Ready-to-Eat ({{MRE}}) Pouches into Polymer Filament for Material Extrusion Additive Manufacturing}, - author = {Hart, Kevin R. and Frketic, Jolie B. and Brown, John R.}, - year = {2018}, - month = may, - journal = {Additive Manufacturing}, - volume = {21}, - number = {February}, - pages = {536--543}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2018.04.011}, - abstract = {Millions of Meals Ready to Eat (MREs) are consumed annually by soldiers around the world. This results in the generation of thousands of tons of residual polymeric packaging waste, which is either left behind in the environment or otherwise recycled or incinerated at a cost of several millions of U.S. dollars per year. Advancements in distributed recycling technologies now allow for on-demand reconstitution of traditionally neglected MRE pouch waste into useful appliances via material extrusion additive manufacturing. In this work, we demonstrate recycling of MRE pouch materials through a combined compounding, filament extrusion, and fused filament fabrication (FFF) additive manufacturing protocol. Mechanical properties and barrier properties of additively manufactured structures were evaluated through tensile testing and water vapor transmission testing, respectively, and found to be comparable to the native pouch materials. Differential Scanning Calorimetry and Thermogravimetric Analysis of the extruded filament and printed materials were contrasted with native pouch materials, showing minimal effects of the manufacturing process on critical thermal transitions in the polymer. Economics and viability of on-demand reconstitution using these proposed methods are briefly discussed and reveal the multiple benefits of this recycling process.}, - keywords = {Distributed recycling,Fused filament fabrication,Low density polyethylene,Military applications}, - file = {/Users/fabio/Zotero/storage/GXA2TV9L/recycling meal-ready-to-eat (mre) pouches into polymer filament for material extrusion additive manufacturing .pdf} -} - -@article{Hartley2020, - title = {Policies for Transitioning towards a Circular Economy: {{Expectations}} from the {{European Union}} ({{EU}})}, - author = {Hartley, Kris and {van Santen}, Ralf and Kirchherr, Julian}, - year = {2020}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {155}, - pages = {104634}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104634} -} - -@article{hartleyBarriersCircularEconomy2021, - title = {Barriers to the Circular Economy: {{The}} Case of the {{Dutch}} Technical and Interior Textiles Industries}, - author = {Hartley, Kris and Roosendaal, Jasper and Kirchherr, Julian}, - year = {2021}, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13196}, - urldate = {2022-01-25}, - abstract = {The academic literature offers some insights about lagging progress on circular economy (CE) transition, including cultural, regulatory, market, and technical barriers. There is also an increasing body of knowledge about barriers to CE adoption that takes a macro-level perspective across industries. However, such studies have largely neglected the industry scale. This study fills that gap by examining barriers to CE transition in the Dutch technical and interior textiles industries. Using data from 27 interviews with manufacturers and retailers, the study finds that high costs for production and marketing, along with lack of consumer interest, are among the most substantial barriers. To provide a system-wide perspective, the study conceptualizes relationships among barriers as a chain reaction: limited knowledge of CE design options raises the difficulty and cost of delivering high-quality circular products at the firm level, while limited availability of circular supply streams combined with the orientation of existing production systems toward linear supply chains constrain CE transition at the industry level. These findings highlight the need for intervention at levels beyond the scale of individual firms, a key implication for public policy.}, - keywords = {circular economy,industrial ecology,Netherlands,public policy,sustainability,textiles}, - file = {/Users/fabio/Zotero/storage/M57ULCWT/full-text.pdf} -} - -@article{Harwood2020, - title = {Conceptualising Technology, Its Development and Future: {{The}} Six Genres of Technology}, - author = {Harwood, Stephen and Eaves, Sally}, - year = {2020}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {160}, - pages = {120174}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120174}, - urldate = {2020-09-01}, - file = {/Users/fabio/Zotero/storage/TGU56NKX/Conceptualising technology, its development and future The six genres of technology.pdf} -} - -@article{Has2012, - title = {Who Has the Power?}, - author = {Has, W H O and Power, T H E}, - year = {2012}, - journal = {Daily Mail}, - volume = {287}, - pages = {50}, - issn = {03077578}, - abstract = {IS THE Prime Minister's intervention in the UK's energy market a genuine attempt to lower household bills or a cynical attempt to make us believe he cares? The 'lowest available tariff' isn't the same thing as the 'lowest possible tariff'. Energy supplies in the UK are controlled by a small number of large companies. The kindest thing that can be said about them is that they shadow each other's prices. [ABSTRACT FROM PUBLISHER]}, - keywords = {2008,287,a,and linderoth,c,chapter,eds,for information processing,format when citing this,h,in ifip international federation,j,linde,moving towards cooperative it,open it-based innovation,please use the following,transfer and knowledge diffusion,volume} -} - -@article{Haselhuhn2014, - title = {Substrate {{Release Mechanisms}} for {{Gas Metal Arc Weld 3D Aluminum Metal Printing}}}, - author = {Haselhuhn, Amberlee S. and Gooding, Eli J. and Glover, Alexandra G. and Anzalone, Gerald C. and Wijnen, Bas and Sanders, Paul G. and Pearce, Joshua M.}, - year = {2014}, - month = dec, - journal = {3D Printing and Additive Manufacturing}, - volume = {1}, - number = {4}, - pages = {204--209}, - issn = {2329-7662}, - doi = {10.1089/3dp.2014.0015}, - abstract = {Limited material options, prohibitively expensive equipment, and high production costs currently limit the ability of small and medium enterprises to use 3D printing to prototype and manufacture metallic goods. A low-cost open-source 3D metal printer that utilizes gas metal arc welding technology has been developed that could make metal printing accessible to the average consumer. Unfortunately, this technology would demand access to expensive cutting tools for part removal from the substrate. This article investigates several substrate treatments to provide a low-cost method to easily remove 3D-printed 1100 aluminum parts from a reusable substrate. Coatings of aluminum oxide and boron nitride on 1100 aluminum and A36 low-carbon steel substrates were tested. Lap shear tests were performed to assess the interlayer adhesion between the printed metal part and the print substrate. No warping of the substrate was observed during printing. It was determined that boron nitride-coated low-carbon steel provided the lowest adhesion strength. Printing aluminum on uncoated low-carbon steel also allowed easy removal of the aluminum part with the benefit of no additional coating steps or costs.}, - isbn = {2329-7662}, - file = {/Users/fabio/Zotero/storage/KG7I9RWU/Haselhuhn et al. - 2014 - Substrate Release Mechanisms for Gas Metal Arc Weld 3D Aluminum Metal Printing.pdf} -} - -@article{Haselhuhn2015, - title = {In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-{{D}} Printing}, - author = {Haselhuhn, Amberlee S. and Wijnen, Bas and Anzalone, Gerald C. and Sanders, Paul G. and Pearce, Joshua M.}, - year = {2015}, - journal = {Journal of Materials Processing Technology}, - volume = {226}, - pages = {50--59}, - publisher = {{Elsevier B.V.}}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2015.06.038}, - abstract = {This study provides an in-depth investigation into low-cost and no-cost substrate release mechanisms that allow gas metal arc weld 3-D printed ER4043 aluminum and ER70S-6 steel parts to be removed from a reusable print substrate with minimal energy. Aluminum oxide, boron nitride, and titanium nitride coatings were evaluated as possible substrate release agents for aluminum printing. Additionally, the in situ formation of substrate release agents such as intermetallics and oxides were tested for both aluminum and steel printing. Testing was performed with a modified Charpy impact tester to remove 3-D printed metal parts from an 1100 aluminum or A36 low carbon steel print substrate to assess the impact energy required for removal. Specimen porosity was measured prior to sectioning and microstructural analysis, hardness traverses were measured across the specimens, and the elastic and shear moduli of the parts were analyzed via ultrasonic methods. All of the employed substrate release mechanisms minimized weld penetration and, in some instances, formed a brittle phase with the print substrate that allowed the specimens to be removed with minimal impact energy. These results thus provide methods with the removal of metal 3-D printed parts from print substrates with no specialized tooling or equipment conducive to distributed manufacturing.}, - isbn = {0924-0136}, - keywords = {3-D printing,Additive manufacturing,Aluminum,Distributed manufacturing,Gas metal arc weld,GMAW,In situ formation,Metal inert gas welding,Metal processing,MIG welding,Open-source,Open-source electronics,Open-source hardware,Personal fabrication,Rapid prototyping,Steel}, - file = {/Users/fabio/Zotero/storage/F56TI5IK/Haselhuhn et al. - 2015 - In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing.pdf} -} - -@article{hashemkhanizolfaniHybridFuzzyMCDM2023, - title = {A Hybrid Fuzzy {{MCDM}} Approach for Prioritizing the Solutions of Resource Recovery Business Model Adoption to Overcome Its Barriers in Emerging Economies}, - author = {Hashemkhani Zolfani, Sarfaraz and G{\"o}rener, Ali and Toker, Kerem}, - year = {2023}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {413}, - pages = {137362}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137362}, - urldate = {2023-05-31}, - abstract = {The resource recovery business model (RRBM) involves producing and utilizing secondary raw materials from waste streams. Overcoming the barriers small and medium-sized firms (SMEs) face in developing countries during the transition to the RRBM is a considerable challenge. RRBM has quite different barriers than other circular economy business models (e.g., product life extension, product-service systems, etc.). The aim of this study is to present a hybrid multi-criteria decision-making (MCDM) methodology to evaluate possible solution strategies by analyzing RRBM barriers. First, a comprehensive literature review was conducted on the barriers to implementing RRBM. Working with the expert decision-making group through semi-structured forms, the micro, macro, and Meso-level barriers were finalized by considering the emerging economies. The importance levels of the twenty-five barriers were determined in the second stage using the Improved Fuzzy Stepwise Weight Assessment Ratio Analysis (IMF-SWARA) method. With the IMF-SWARA method, it was convenient to get straightforward, expert opinions, and inconsistency was no problem. In the third stage, eight main solution strategies were analyzed to see to what extent they could overcome the barriers. At this point, the Fuzzy Measurement Alternatives and Ranking according to Compromise Solution (F-MARCOS) was used to evaluate the decision-maker's opinions more accurately, which may not be confident within the scope of the criteria. While the most critical barriers to be considered are collaboration problems, global secondary material supply chain problems, and quality problems of the recovered resources, the solutions to be considered are financial support, design for circularity, and industrial symbiosis. In addition, a comprehensive sensitivity analysis was performed to test its validity after the proposed model was applied. This study's key contribution is to highlight the barriers that may occur in the context of emerging economies during the adoption of the RRBM as well as the solutions that should be prioritized. Thus, it became evident which actions SMEs, representing the most significant proportion of businesses in emerging economies, should take to execute the resource recovery business model.}, - langid = {english}, - keywords = {barrier\&solution analysis,Emerging economies,F-MARCOS,IMF-SWARA,MCDM,Resource recovery business model}, - file = {/Users/fabio/Zotero/storage/VIT5YSII/Hashemkhani Zolfani et al. - 2023 - A hybrid fuzzy MCDM approach for prioritizing the .pdf} -} - -@article{hasibRheologyScalingSpherical2021, - title = {Rheology Scaling of Spherical Metal Powders Dispersed in Thermoplastics and Its Correlation to the Extrudability of Filaments for {{3D}} Printing}, - author = {Hasib, Amm G. and Niauzorau, Stanislau and Xu, Weiheng and Niverty, Sridhar and Kublik, Natalya and Williams, Jason and Chawla, Nikhilesh and Song, Kenan and Azeredo, Bruno}, - year = {2021}, - month = may, - journal = {Additive Manufacturing}, - volume = {41}, - pages = {101967}, - publisher = {{Elsevier BV}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.101967}, - urldate = {2021-04-21}, - file = {/Users/fabio/Zotero/storage/KUFSI7HT/full-text.pdf} -} - -@article{hassaniScienceStatisticsData2021, - title = {The Science of Statistics versus Data Science: {{What}} Is the Future?}, - author = {Hassani, Hossein and Beneki, Christina and Silva, Emmanuel Sirimal and Vandeput, Nicolas and Madsen, Dag {\O}ivind}, - year = {2021}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {173}, - pages = {121111}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121111}, - urldate = {2021-08-24} -} - -@article{hassaniSurveyProcessModelling2023, - title = {A {{Survey}} on {{Process Modelling}}, {{Innovation}}, {{Design}}, and {{Material Characterisation}} in {{Additive Manufacturing}}}, - author = {Hassani, Vahid and Emami, MohammadMahdi and Tjahjowidodo, Tegoeh and Sharma, Abhay and Roberts, Clive}, - year = {2023}, - month = apr, - journal = {Digital Manufacturing Technology}, - pages = {46--75}, - issn = {2810-9317}, - doi = {10.37256/dmt.3120232181}, - urldate = {2023-04-19}, - abstract = {The unique design freedom offered by additive manufacturing (AM) technologies enables engineers to develop more innovative products with relatively lower costs within a shorter period of processing time in comparison with conventional manufacturing methods. On the other hand, the unique capabilities of AM have created a platform for researchers to combine several engineering methods with the new manufacturing technique to grow industrial applications as well as resolve the existing issues with AM processes. Understanding the research values that AM offers academic environments, this paper performs a systematic survey on AM-related research topics in the fields of mechanical engineering and materials science that have attracted much attention from research teams over the last few years. These topics, namely process modelling in AM, innovative research in AM, generative design by AM, material characterisation in AM processes, and finally, design for additive manufacturing (DfAM), are notably investigated through this study.}, - copyright = {Copyright (c) 2023 Vahid Hassani, MohammadMahdi Emami, Tegoeh Tjahjowidodo, Abhay Sharma, Clive Roberts}, - langid = {english}, - keywords = {additive manufacturing technologies,computational modelling,DfAM,generative design,material characterisation}, - file = {/Users/fabio/Zotero/storage/3PKRF9CY/Hassani et al. - 2023 - A Survey on Process Modelling, Innovation, Design,.pdf} -} - -@article{hassiniLiteratureReviewCase2012, - title = {A Literature Review and a Case Study of Sustainable Supply Chains with a Focus on Metrics}, - author = {Hassini, Elkafi and Surti, Chirag and Searcy, Cory}, - year = {2012}, - month = nov, - journal = {International Journal of Production Economics}, - series = {Sustainable {{Development}} of {{Manufacturing}} and {{Services}}}, - volume = {140}, - number = {1}, - pages = {69--82}, - issn = {0925-5273}, - doi = {10.1016/j.ijpe.2012.01.042}, - urldate = {2022-09-13}, - abstract = {We review the literature on sustainable supply chains during the last decade; 2000\textendash 2010. We analyze the literature from different perspectives. We then provide frameworks for sustainable supply chain management and performance measures. We also provide a case study to illustrate the experience of a utility supply chain in setting performance indicators.}, - langid = {english}, - keywords = {Performance measurement,Sustainable supply chain} -} - -@article{Hattiangadi2000, - title = {Modeling of Multiple Pore Ceramic Materials Fabricated via Fused Deposition Process}, - author = {Hattiangadi, Ashwin and Bandyopadhyay, Amit}, - year = {2000}, - month = feb, - journal = {Scripta Materialia}, - volume = {42}, - number = {6}, - pages = {581--588}, - issn = {13596462}, - doi = {10.1016/S1359-6462(99)00370-X}, - urldate = {2015-03-17}, - keywords = {fused deposition process,mechanical properties,modeling,mullite,porous ceramics}, - file = {/Users/fabio/Zotero/storage/CPLCMK4L/Hattiangadi, Bandyopadhyay - 2000 - Modeling of multiple pore ceramic materials fabricated via fused deposition process.pdf} -} - -@article{Hatton-Jones2015, - title = {Case Analysis of the Do-It-Yourself Industry}, - author = {{Hatton-Jones}, Siobhan and Teah, Min}, - year = {2015}, - month = nov, - journal = {Asia Pacific Journal of Marketing and Logistics}, - volume = {27}, - number = {5}, - pages = {826--838}, - publisher = {{Emerald Group Publishing Ltd.}}, - issn = {17584248}, - doi = {10.1108/APJML-09-2015-0135}, - urldate = {2020-05-04}, - abstract = {Purpose \textendash{} The purpose of this paper is to examine the accelerated growth within the Australian do-it-yourself (DIY) market and discusses the factors and drivers affecting consumer motivations to engage in such assembly tasks. Design/methodology/approach \textendash{} Using a case study approach, evaluations and critical analysis of the DIY industry was being formulated by drawing on real life brands and examples. An analysis of various DIY retail strategies and DIY decking companies was synthesised to provide insights into the DIY industry. Findings \textendash{} The insights into the industry outlines the changing consumer attitudes and motivations towards DIY and decking tasks. The findings on an evolving DIY industry, in particular the decking market demonstrate useful implications for academics, policy makers and brand practitioners. Originality/value \textendash{} There have been little industry studies that delve into specifically decking products. Considering the vast increase in homeware, renovations, and gardening, the study provides insights from various case studies into the strategies undertaken by Australian and global companies. In addition, the majority of studies undertaken have also been concerned with the intrinsic motivations of consumers and not necessarily the extrinsic effect that brands and retailers advertently and inadvertently communicate and signal to consumers of DIY products.}, - keywords = {Branding,Consumer behaviour,Decking,DIY,International marketing,Retail} -} - -@article{haunImprovingAutomatedLife2022, - title = {Improving Automated {{Life Cycle Assessment}} with {{Life Cycle Inventory}} Model Constructs}, - author = {Haun, Patrick and M{\"u}ller, Philipp and Traverso, Marzia}, - year = {2022}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {370}, - pages = {133452}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133452}, - urldate = {2022-09-18}, - abstract = {Global warming is a global and critical challenge and car manufacturers pledge to reduce their carbon footprint. It is mandatory to assess the carbon footprint of current and upcoming vehicles to achieve these self-set and quantified targets. Life Cycle Assessment (LCA) is a standardized and scientifically acknowledged method to quantify a product's or company's environmental impact. Due to the complexity of a vehicle's cradle-to-gate phase, automation of LCAs is a suitable simplification strategy by importing product information and automatically assign them to pre-defined life cycle inventory (LCI) models. The data acquisition is a recognized issue, but the LCI modelling is hardly discussed in the literature for automated LCAs even though it has a significant influence on their accuracy. This paper presents an approach to elaborate an LCI model construct that enables consistent and efficient automated LCA while maintaining defined accuracy and applicability in commercial LCA software. Such an LCI model construct and its derivation are presented in this paper for automotive aluminium components considering sheet components, casting components and extrusion profiles. It is mandatory for a precise calculation to take the most influencing parameters into consideration. Grid points for each of these parameters are elaborated dependent on the characteristic if the parameter is continuously or discretely variable. The resulting LCI model construct makes this most influencing parameters customizable in an automated LCA. A generic method for the design of such an LCI model construct based on the findings of the use case was derived in this paper. The application of this methodology is not limited for vehicle's LCAs and carbon footprint, but other complex products and impact categories to enable efficient, consistent, and accurate LCA results for complex products.}, - langid = {english}, - keywords = {Aluminium components,Automated LCA,Automotive components,LCI modelling,life cycle assessment,Life Cycle Inventory}, - file = {/Users/fabio/Zotero/storage/BMVPIH69/S0959652622030347.html} -} - -@article{Hayes2020, - title = {Learning from Nature \textendash{} {{Biomimicry}} Innovation to Support Infrastructure Sustainability and Resilience}, - author = {Hayes, Samantha and Desha, Cheryl and Baumeister, Dayna}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120287}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120287}, - urldate = {2020-09-18} -} - -@article{He2014, - title = {Fabrication of Low Cost Soft Tissue Prostheses with the Desktop {{3D}} Printer}, - author = {He, Yong and Xue, Guang-huai and Fu, Jian-zhong}, - year = {2014}, - month = nov, - journal = {Scientific Reports}, - volume = {4}, - pages = {6973}, - issn = {2045-2322}, - doi = {10.1038/srep06973}, - abstract = {Soft tissue prostheses such as artificial ear, eye and nose are widely used in the maxillofacial rehabilitation. In this report we demonstrate how to fabricate soft prostheses mold with a low cost desktop 3D printer. The fabrication method used is referred to as Scanning Printing Polishing Casting (SPPC). Firstly the anatomy is scanned with a 3Dscanner, then a tissue casting mold is designed on computer and printed with a desktop 3D printer. Subsequently, a chemical polishing method is used to polish the casting mold by removing the staircase effect and acquiring a smooth surface. Finally, the last step is to cast medical grade silicone into the mold. After the silicone is cured, the fine soft prostheses can be removed from the mold. Utilizing the SPPC method, soft prostheses with smooth surface and complicated structure can be fabricated at a low cost. Accordingly, the total cost of fabricating ear prosthesis is about \$30, which is much lower than the current soft prostheses fabrication methods}, - file = {/Users/fabio/Zotero/storage/544CKV8R/He, Xue, Fu - 2014 - Fabrication of low cost soft tissue prostheses with the desktop 3D printer.pdf} -} - -@article{He2019, - title = {Demand Identification Model of Potential Technology Based on {{SAO}} Structure Semantic Analysis: {{The}} Case of New Energy and Energy Saving Fields}, - author = {He, Xi-jun and Meng, Xue and Dong, Yan-bo and Wu, Yu-ying}, - year = {2019}, - month = mar, - journal = {Technology in Society}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.02.002} -} - -@article{He2019a, - title = {Microscopic Morphology, Rheological Behavior, and Mechanical Properties of Polymers: {{Recycled}} Acrylonitrile-butadiene-styrene/Polybutylene Terephthalate Blends}, - author = {He, Hezhi and Zhan, Zhiming and Zhu, Zhiwen and Xue, Bin and Li, Jiqian and Chen, Ming and Wang, Guozhen}, - year = {2020}, - month = jan, - journal = {Journal of Applied Polymer Science}, - volume = {137}, - number = {4}, - pages = {48310}, - issn = {0021-8995}, - doi = {10.1002/app.48310}, - keywords = {10,1002,48310,accepted 10 july 2019,app,doi,microstructure,received 16 january 2019,recycled abs,rheological behavior,sag chemical composition,viscosity composition} -} - -@article{He2019b, - title = {Recyclable {{3D Printing}} of {{Polyimine-Based Covalent Adaptable Network Polymers}}}, - author = {He, Xu and Lei, Zepeng and Zhang, Wei and Yu, Kai}, - year = {2019}, - journal = {3D Printing and Additive Manufacturing}, - volume = {6}, - number = {1}, - pages = {31--39}, - issn = {23297670}, - doi = {10.1089/3dp.2018.0115}, - keywords = {bond exchange reactions,direct ink writing,polyimine,recyclable 3D printing,thermoset recycling}, - file = {/Users/fabio/Zotero/storage/MARQWAQF/recyclable 3d printing of polyimine-based covalent adaptable network polymers.pdf} -} - -@article{Hebda2019, - title = {A Method for Predicting Geometric Characteristics of Polymer Deposition during Fused-Filament-Fabrication}, - author = {Hebda, Michael and McIlroy, Claire and Whiteside, Ben and {Caton-Rose}, Fin and Coates, Phil}, - year = {2019}, - month = may, - journal = {Additive Manufacturing}, - volume = {27}, - pages = {99--108}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.02.013}, - file = {/Users/fabio/Zotero/storage/CGWLGP2U/A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication.pdf} -} - -@article{Hebert2016, - title = {Viewpoint: Metallurgical Aspects of Powder Bed Metal Additive Manufacturing}, - author = {Hebert, Rainer J.}, - year = {2016}, - journal = {Journal of Materials Science}, - volume = {51}, - number = {3}, - pages = {1165--1175}, - publisher = {{Springer US}}, - issn = {15734803}, - doi = {10.1007/s10853-015-9479-x}, - abstract = {Metal additive manufacturing has emerged as a new manufacturing option for aerospace and biomedical applications. The many challenges that surround this new manufacturing technology fall into several different categories. The paper addresses one of these categories, the physical mechanisms that control the additive manufacturing process. Physical mechanisms control the effects of processing parameters on microstructures and properties of additively manufactured parts. Some mechanisms might not have been recognized, yet, and for those that are currently known, detailed quantitative predictions have to be established. The physical mechanisms of metal additive manufacturing are firmly grounded in metallurgy, branching into laser physics and the physics of granular materials. Powder bed additive manufacturing is described from the powder storage to post-processing and elements of metallurgy are highlighted that are relevant for the different aspects of the additive manufacturing process. These elements include the surface reactions on powder particles, the heating and melting behavior of the powder bed, solidification, and post-processing. This overview of the different metallurgical aspects to additive manufacturing is intended to help guide research efforts and it will also serve as a snapshot of the current understanding of powder bed additive manufacturing. 2015, Springer Science+Business Media New York.}, - isbn = {1573-4803}, - file = {/Users/fabio/Zotero/storage/TVA68JSJ/Hebert - 2016 - Viewpoint metallurgical aspects of powder bed metal additive manufacturing.pdf} -} - -@article{Hebrok2017, - title = {Household Food Waste: {{Drivers}} and Potential Intervention Points for Design \textendash{} {{An}} Extensive Review}, - author = {Hebrok, Marie and Boks, Casper}, - year = {2017}, - journal = {Journal of Cleaner Production}, - volume = {151}, - pages = {380--392}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.03.069}, - abstract = {This review describes the consumer related material and socio-cultural drivers behind food waste found in academic and grey literature. The aim is to identify intervention points for design interventions to reduce household food waste. Within the reviewed literature, an array of different aspects of consumer food waste is studied such as consumer behaviour, attitudes, beliefs and values, quantifications and compositional analyses of food waste in Western countries, waste prevention and concrete design interventions. This illustrates that the problem of consumer food wasting practices is an issue that is complex and involves both socio-cultural and material factors. However, the literature is more focused on generating knowledge about the problem than on finding solutions. Thus, further research should attempt to find ways to test new ideas and interventions that could reduce food waste in households.}, - isbn = {09596526}, - keywords = {Consumer,Design,Drivers,Food waste,Intervention,Review,Sustainable behaviour}, - file = {/Users/fabio/Zotero/storage/PMUZJLQ5/Household food waste Drivers and potential intervention points for design – An extensive review.pdf} -} - -@article{heDataFusionbasedSustainable2021, - title = {Data Fusion-Based Sustainable Digital Twin System of Intelligent Detection Robotics}, - author = {He, Bin and Cao, Xiaoyang and Hua, Yicheng}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124181}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124181}, - urldate = {2020-10-05} -} - -@article{Hediger1999, - title = {Reconciling ``Weak'' and ``Strong'' Sustainability}, - author = {Hediger, Werner}, - year = {1999}, - month = jul, - journal = {International Journal of Social Economics}, - volume = {26}, - number = {7/8/9}, - pages = {1120--1144}, - issn = {0306-8293}, - doi = {10.1108/03068299910245859}, - isbn = {0306829991}, - file = {/Users/fabio/Zotero/storage/LPN84HQL/hediger1999.pdf} -} - -@article{heibergAssessingTransitionsSociotechnical2022, - title = {Assessing Transitions through Socio-Technical Configuration Analysis \textendash{} a Methodological Framework and a Case Study in the Water Sector}, - author = {Heiberg, Jonas and Truffer, Bernhard and Binz, Christian}, - year = {2022}, - month = jan, - journal = {Research Policy}, - volume = {51}, - number = {1}, - pages = {104363}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104363}, - urldate = {2021-09-27} -} - -@article{heijungsRevisedMathematicsLife2022, - title = {The Revised Mathematics of Life Cycle Sustainability Assessment}, - author = {Heijungs, Reinout}, - year = {2022}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {350}, - pages = {131380}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131380}, - urldate = {2022-04-11} -} - -@article{Heikkinen2020, - title = {A Study of Degrowth Paths Based on the von {{Neumann}} Equilibrium Model}, - author = {Heikkinen, Tiina}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {251}, - pages = {119562}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.119562} -} - -@article{Heikkinen2020a, - title = {Towards National Policy for Open Source Hardware Research: {{The}} Case of {{Finland}}}, - author = {Heikkinen, I.T.S. and Savin, H and Partanen, J and Sepp{\"a}l{\"a}, J and Pearce, J.M.}, - year = {2020}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {155}, - number = {February}, - pages = {119986}, - publisher = {{Elsevier}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119986}, - keywords = {economics of science,Economics of science,Equipment,Open source,Open source hardware,Research expenditures,Research tools}, - file = {/Users/fabio/Zotero/storage/UG6GC5HL/Towards national policy for open source hardware research- The case of Finland.pdf} -} - -@article{heikkurinenDegrowthMeansTechnology2016, - title = {Degrowth by Means of Technology? {{A}} Treatise for an Ethos of Releasement}, - author = {Heikkurinen, Pasi}, - year = {2016}, - doi = {10.1016/j.jclepro.2016.07.070}, - urldate = {2021-01-07}, - abstract = {The large-scale ecological damage caused by growth societies calls for economic degrowth in terms of a radical decrease in matter/energy throughput. This article examines the role of modern technology in degrowth with a focus on the question of agency and its ethical implications. After conceptualising technology as practice, the paper finds that while technological practice encompasses an agency for social change, it is restricted to transforming the non-human world to human-made objects. This is because in technological practice the world and its objects unfold as a standing-reserve for human use. Due to this calculative and anthropocentric thinking, technological practice does not and cannot support the emergence of a kind of agency that either does or can let things be. Moreover, the more technological the practice, the more objects are utilised. The paper concludes that technological practice does not support the transition to degrowth, because it directs its agents towards the continuous transformation of non-human-made objects into human-made objects resulting in an increase in cumulative throughput. The paper thus suggests that an ethos of releasement is needed to attain, as well as to live in, a degrowth society. The rationale provided for refraining from the technological practice in order to contribute to ecologically sensible social change is the chief contribution of this paper.}, - keywords = {Degrowth,Ethics,Practice,Releasement,Sustainability,Technology}, - file = {/Users/fabio/Zotero/storage/V7XPQZ3W/full-text.pdf} -} - -@article{Heindl2019, - title = {The {{Analytic Hierarchy Process}} as a Methodological Contribution to Improve Regional Innovation System Research: {{Explored}} through Comparative Research in {{China}}}, - author = {Heindl, Anna-Barbara and Liefner, Ingo}, - year = {2019}, - month = nov, - journal = {Technology in Society}, - volume = {59}, - pages = {101197}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.101197} -} - -@article{Heiskanen2011, - title = {Spaces of Innovation: Experiences from Two Small High-tech Firms}, - author = {Heiskanen, Tuula and Heiskanen, Hannu}, - year = {2011}, - journal = {Journal of Workplace Learning}, - volume = {23}, - number = {2}, - pages = {97--116}, - issn = {1366-5626}, - doi = {10.1108/13665621111108774}, - abstract = {Purpose \textendash{} By comparing two small high-tech firms specialising in medical technology this article seeks to answer the following questions: What are the key characteristics of innovation processes in the case firms? How do the mutual relationships between mental, social and physical spaces explain the different pathways in the innovation processes in the firms? Design/methodology/approach \textendash{} One case is based on an in-depth study conducted by the authors. Regarding the other case, a secondary analysis is conducted of a case described in the literature. Both cases apply several data sources. The case firms are comparable in their most crucial aspects (field, main product, geographical location, joint learning space in the start-up phase). Findings \textendash{} The firms have many similar features. The study, however, draws attention to the factors that have made them substantially different as contexts of innovation activities. The differences are interpreted through the concepts of physical, social and mental space. Special attention is paid to the tightness/permeability of boundaries circumscribing spaces and to how this condition supports/inhibits cooperation between different occupational groups in the product planning process. Tightness of boundaries is not unambiguously a good or a bad thing but permeable boundaries are needed when a mix of different knowledge bases is vital. Research limitations/implications \textendash{} The focus remains within the firms. Innovation activities extend also beyond the borders of the organisation. Practical implications \textendash{} Management should be aware of the productive and counterproductive effects of spaces and the means to influence their shaping. Originality/value \textendash{} The study highlights the potential of the concept of space in an empirical comparative setting for studying organisational prerequisites for innovation processes and related learning and cooperation.}, - isbn = {1366562111110} -} - -@article{hejnaPotentialApplicationsByproducts2021, - title = {Potential Applications of By-Products from the Coffee Industry in Polymer Technology \textendash{} {{Current}} State and Perspectives}, - author = {Hejna, Aleksander}, - year = {2021}, - month = feb, - journal = {Waste Management}, - volume = {121}, - pages = {296--330}, - publisher = {{Elsevier BV}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.12.018}, - urldate = {2021-01-13} -} - -@article{helbigTerminologyDowncycling2022, - title = {A Terminology for Downcycling}, - author = {Helbig, Christoph and Huether, Jonas and Joachimsthaler, Charlotte and Lehmann, Christian and Raatz, Simone and Thorenz, Andrea and Faulstich, Martin and Tuma, Axel}, - year = {2022}, - month = may, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13289}, - urldate = {2022-05-30}, - abstract = {The term downcycling is often used anecdotally to describe imperfections in recycling. However, it is rarely defined. Here, we identify six meanings of the term downcycling as used in scientific articles and reports. These encompass the material quality of reprocessed materials, target applications, product value, alloying element losses, material systems, and additional primary production. In a proposal for harmonized and more specific terminology, we define downcycling as the phenomenon of quality reduction of materials reprocessed from waste relative to their original quality. We further identify that the reduced quality can express itself thermodynamically, functionally, and economically , covering all perspectives on downcycling. Dilution, contamination, reduced demand for recycled materials, and design-related issues can cause those downcycling effects. We anticipate that this more precise terminology can help quantify downcy-cling, keep materials in the loop longer, use materials more often and at higher quality, and therefore assist in reducing material-related environmental impacts. K E Y W O R D S circular economy, downcycling, downgrading, industrial ecology, recycling, waste}, - keywords = {circular economy,downcycling,downgrading,industrial ecology,recycling,waste}, - file = {/Users/fabio/Zotero/storage/5JGDH9JP/full-text.pdf} -} - -@article{Heller2016, - title = {Effects of Extrudate Swell and Nozzle Geometry on Fiber Orientation in {{Fused Filament Fabrication}} Nozzle Flow}, - author = {Heller, Blake P and Smith, Douglas E and Jack, David A}, - year = {2016}, - month = oct, - journal = {Additive Manufacturing}, - volume = {12}, - pages = {252--264}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2016.06.005}, - keywords = {fused filament fabrication}, - file = {/Users/fabio/Zotero/storage/QBHY5N4W/Effects of extrudate swell and nozzle geometry on fiber orientation in Fused Filament Fabrication nozzle flow.pdf} -} - -@article{hellerIncludingStewardshipEcosystem2023, - title = {Including Stewardship in Ecosystem Health Assessment}, - author = {Heller, Nicole E. and McManus Chauvin, Kelly and Skybrook, Dylan and Barnosky, Anthony D.}, - year = {2023}, - month = apr, - journal = {Nature Sustainability}, - pages = {1--11}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-023-01096-7}, - urldate = {2023-05-01}, - abstract = {To adapt to the ecological crises and social inequities of the Anthropocene, a new conservation paradigm is emerging that embraces people in nature and the positive roles people play in ecosystem health through land stewardship. We discuss the emergence of this new model and explore the methods needed to research and coordinate stewardship as part of conservation landscape planning through a practical case study. Updating conservation frameworks to include the positive impacts people have on ecosystems, we argue, is a powerful leverage point for catalysing more effective and equitable nature conservation and other large-scale societal transformations necessary for just sustainability.}, - copyright = {2023 Springer Nature Limited}, - langid = {english}, - keywords = {Conservation biology,Sustainability}, - file = {/Users/fabio/Zotero/storage/KG9Y9LBI/Heller et al_2023_Including stewardship in ecosystem health assessment.pdf} -} - -@article{hellerPlanarDepositionFlow2019, - title = {Planar Deposition Flow Modeling of Fiber Filled Composites in Large Area Additive Manufacturing}, - author = {Heller, Blake P. and Smith, Douglas E. and Jack, David A.}, - year = {2019}, - month = jan, - journal = {Additive Manufacturing}, - volume = {25}, - pages = {227--238}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2018.10.031}, - urldate = {2021-05-20}, - abstract = {The rapid transition of the Fused Filament Fabrication (FFF) Additive Manufacturing (AM) process from small scale prototype models to large scale polymer deposition has been driven, in part, by the addition of short carbon fibers to the polymer feedstock. The addition of short carbon fibers improves both the mechanical and thermal properties of the printed beads. The improvements to the anisotropic mechanical and thermal properties of the polymer feedstock are dependent on the spatially varying orientation of short carbon fibers which is itself a function of the velocity gradients in the flow field throughout the nozzle and in the extrudate during deposition flow. This paper presents a computational approach for simulating the deposition flow that occurs in the Large Area Additive Manufacturing (LAAM) process and the effects on the final short fiber orientation state in the deposited polymer bead and the resulting bead mechanical and thermal properties. The finite element method is used to evaluate Stokes flow for a two-dimensional planar flow field within a Strangpresse Model 19 LAAM polymer deposition nozzle. A shape optimization method is employed to compute the shape of the polymer melt flow free surface below the nozzle exit as the bead is deposited on a moving print platform. Three nozzle configurations are considered in this study. Fiber orientation tensors are calculated throughout the fluid domain using the Folgar-Tucker fiber interaction model. The effective bulk mechanical properties, specifically the longitudinal and transverse moduli, and the coefficient of thermal expansion, are also calculated for the deposited bead based on the spatially varying fiber orientation tensors. Fiber orientation is found to be highly aligned along the deposition direction of the resulting bead and the computed properties through the thickness of the bead are found to be affected by nozzle height during deposition.}, - keywords = {Elastic properties,Fiber orientation,Large area additive manufacturing,Polymer composite,Thermal properties} -} - -@article{helmefalkUnderstandingMechanismsHousehold2023, - title = {Understanding the Mechanisms of Household and Stakeholder Engagement in a Recycling Ecosystem: {{The SDL}} Perspective}, - shorttitle = {Understanding the Mechanisms of Household and Stakeholder Engagement in a Recycling Ecosystem}, - author = {Helmefalk, Miralem and Palmquist, Adam and Rosenlund, Joacim}, - year = {2023}, - month = apr, - journal = {Waste Management}, - volume = {160}, - pages = {1--11}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2023.01.030}, - urldate = {2023-02-13}, - langid = {english} -} - -@article{heMappingInterorganizationalKnowledge2023, - title = {Mapping Interorganizational Knowledge Sharing Mechanisms in Projects from the Socio-Technical Perspective}, - author = {He, Hui and He, Qinghua and Chan, Albert P. C. and Wang, Ge and Yang, Yang}, - year = {2023}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {192}, - pages = {122537}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122537}, - urldate = {2023-05-10}, - abstract = {Interorganizational knowledge sharing (IKS) has become an important strategy for project organizations to drive high performance in interorganizational projects. Distinct IKS mechanisms (i.e., the management activities facilitating IKS among organizations) are proposed in the existing literature. However, the matching between knowledge categorization and IKS mechanisms are less explored. From the socio-technical perspective, this study employed grounded theory to identify and match different types of knowledge and IKS mechanisms. Qualitative data collected from primary and secondary sources were integrated to triangulate the research findings. Four categories of knowledge were identified based on their characteristics, including knowledge tacitness and heterogeneity. Then, a four-dimension framework of IKS mechanisms (i.e., event, social, technical, and document mechanisms) was developed to form matching configurations to facilitate IKS in different scenarios. This framework deepens our understanding of how to form strategies to apply proper IKS mechanisms to facilitate the sharing of different types of knowledge from the socio-technical perspective.}, - langid = {english}, - keywords = {Interorganizational knowledge sharing (IKS),Interorganizational projects,Knowledge heterogeneity,Knowledge sharing mechanisms,Knowledge tacitness,Socio-technical perspective}, - file = {/Users/fabio/Zotero/storage/H4MDZPXJ/He et al. - 2023 - Mapping interorganizational knowledge sharing mech.pdf;/Users/fabio/Zotero/storage/K3AZXRM3/S0040162523002226.html} -} - -@article{heMicroplasticsTerrestrialEnvironments2020, - title = {Microplastics in {{Terrestrial Environments}}}, - editor = {He, Defu and Luo, Yongming}, - year = {2020}, - volume = {95}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-030-56271-7}, - urldate = {2022-01-13}, - isbn = {978-3-030-56270-0} -} - -@book{Hennlock2015, - title = {Economic Policy Instruments for Plastic Waste}, - author = {Hennlock, Magnus and {zu Castell-R{\"u}denhausen}, Malin and Wahlstr{\"o}m, Margareta and Kj{\ae}r, Birgitte and Milios, Leonidas and Vea, Eldbj{\o}rg and Watson, David and Hanssen, Ole J{\o}rgen and Fr{\aa}ne, Anna and Stenmarc, {\AA}sa and Tekie, Haben}, - year = {2015}, - month = mar, - publisher = {{Nordic Council of Ministers}}, - doi = {10.6027/TN2014-569}, - abstract = {All four Nordic countries, except Sweden, use taxes on beverage packaging outside deposit-refund systems.}, - isbn = {978-92-893-3889-9}, - file = {/Users/fabio/Zotero/storage/B5PQW5Z5/Economic Policy Instruments for Plastic Waste.pdf} -} - -@article{henrichOriginsPsychologyHuman2021, - title = {The {{Origins}} and {{Psychology}} of {{Human Cooperation}}}, - author = {Henrich, Joseph and Muthukrishna, Michael}, - year = {2021}, - month = jan, - journal = {Annual Review of Psychology}, - volume = {72}, - number = {1}, - pages = {207--240}, - publisher = {{Annual Reviews}}, - issn = {0066-4308}, - doi = {10.1146/annurev-psych-081920-042106}, - urldate = {2021-01-13}, - abstract = {{$<$}p{$>$}Humans are an ultrasocial species. This sociality, however, cannot be fully explained by the canonical approaches found in evolutionary biology, psychology, or economics. Understanding our unique social psychology requires accounting not only for the breadth and intensity of human cooperation but also for the variation found across societies, over history, and among behavioral domains. Here, we introduce an expanded evolutionary approach that considers how genetic and cultural evolution, and their interaction, may have shaped both the reliably developing features of our minds and the well-documented differences in cultural psychologies around the globe. We review the major evolutionary mechanisms that have been proposed to explain human cooperation, including kinship, reciprocity, reputation, signaling, and punishment; we discuss key culture\textendash gene coevolutionary hypotheses, such as those surrounding self-domestication and norm psychology; and we consider the role of religions and marriage systems. Empirically, we synthesize experimental and observational evidence from studies of children and adults from diverse societies with research among nonhuman primates.{$<$}/p{$>$}}, - keywords = {cooperation,cultural evolution,culture-gene coevolution,evolutionary psychology,social behavior,ultrasociality} -} - -@article{hensenUsingBuildingSimulation2015, - title = {Using Building Simulation for Moving Innovations across the ``{{Valley}} of {{Death}}''}, - author = {Hensen, Jan and Loonen, Roel and Archontiki, Maria and Kanellis, Michalis}, - year = {2015}, - month = may, - journal = {REHVA Journal}, - volume = {52}, - pages = {58--62}, - abstract = {The Valley of Death is known as a metaphor for the lack of resources and expertise that impedes new ideas in their transition from lab to market. This gap also hinders innovation and adoption of new technologies for improved energy efficiency in buildings. This paper presents why and how building simulation can help close this gap, and shows some examples.}, - file = {/Users/fabio/Zotero/storage/6ZVKU3F3/Hensen et al. - 2015 - Using building simulation for moving innovations a.pdf} -} - -@article{hensherIncorporatingEnvironmentalImpacts2020, - title = {Incorporating Environmental Impacts into the Economic Evaluation of Health Care Systems: {{Perspectives}} from Ecological Economics}, - author = {Hensher, Martin}, - year = {2020}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {154}, - pages = {104623}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2019.104623}, - urldate = {2021-07-21}, - abstract = {Health care is responsible for a range of negative environmental impacts, including greenhouse gas emissions, air pollution, plastics waste, and pharmaceutical pollution of ecosystems through excretion and inappropriate disposal. Evidence on the scale of these impacts has been growing in high-income countries. To date, there has been only limited discussion of how environmental impacts might be incorporated into economic evaluations of health care programs, including health technology assessment. This paper considers why and how this aim might be achieved, using perspectives from both mainstream and ecological economics. There are strong arguments for using economic evaluation to internalise the negative environmental externalities currently being generated by health care, as well as precautionary arguments for health systems to better understand their exposure to their environmental impacts. The paper tests the feasibility of incorporating the costs of greenhouse gas emissions within costing for economic evaluation, and concludes that the use of shadow prices to achieve this aim is feasible. It suggests that this cost-based approach is preferable to more convoluted attempts to incorporate environmental impacts in the outcome component of health economic evaluations. The interaction between overuse, antimicrobial resistance and environmental harms of health care is identified as an area that would benefit from investigation using innovative economic methods.}, - keywords = {Ecological economics,Economic evaluation,Environmental impacts,Externalities,Health care,Health economics} -} - -@incollection{Henton2005, - title = {Polylactic {{Acid Technology}}}, - booktitle = {Natural {{Fibers}}, {{Biopolymers}}, and {{Biocomposites}}}, - author = {Henton, David and Gruber, Patrick and Lunt, Jim and Randall, Jed}, - year = {2005}, - month = apr, - pages = {527--578}, - publisher = {{CRC Press}}, - doi = {10.1201/9780203508206.ch16}, - file = {/Users/fabio/Zotero/storage/NMHPFXCK/Henton et al. - 2005 - Polylactic Acid Technology.pdf} -} - -@article{heoApplyingForesightPolicy2021, - title = {Applying Foresight to Policy Agenda-Setting: {{A}} Successful Case in {{South Korea}}}, - author = {Heo, Kyungmoo and Seo, Yongseok}, - year = {2021}, - month = mar, - journal = {Futures}, - volume = {127}, - pages = {102701}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102701}, - urldate = {2021-02-14}, - abstract = {There is still a persistent gap between `knowing' the future and implementing it in policymaking. South Korea implemented a project in 2019 to proactively manage future conflicts. The project was initiated to provide foresight-policymaking integration by elevating future conflict issues to ongoing government institutional agendas. Utilizing an exploratory, single-project case based on a field-study method, this article presents observations of the project's applied approaches in foresight-policy integration along with corresponding implications. The project integrated agenda-setting strategies such as actor-based strategies (inside-access, mobilization, and outside-initiation models), an issue-attention strategy, and packaging strategies (analogous to previous agendas and the utilization of symbols), as well as two-way translation methods of foresight (forecasting and backcasting). There are two underlying reasons for this integration being successful, namely the nature of agenda-setting being conducive to foresight processes and the project's key design variables (forward-looking leadership and the designated group's active representation of future generations). A future conflict agenda-setting project can serve as a great entry point through which to increase the anticipatory knowledge and capacity of the actors involved. To internalize these, however, new anticipatory knowledge- and capacity-based governance should be introduced through the continued training and education of both government officials and the public.}, - keywords = {Agenda-setting,Anticipation,Conflict,Foresight,Governance,Policymaking} -} - -@unpublished{Hering2005, - title = {Innovation Roles the People You Need for Successful Innovation}, - author = {Hering, Dean and Phillips, Jeffrey}, - year = {2005}, - month = nov, - series = {White Paper}, - pages = {1--15}, - publisher = {{NetCentrics Corporation}} -} - -@article{hermannSociotechnicalImaginariesCircular2022, - title = {Socio-Technical Imaginaries of a Circular Economy in Governmental Discourse and among Science, Technology, and Innovation Actors: {{A Norwegian}} Case Study}, - shorttitle = {Socio-Technical Imaginaries of a Circular Economy in Governmental Discourse and among Science, Technology, and Innovation Actors}, - author = {Hermann, Roberto Rivas and Pansera, Mario and Nogueira, Leticia Antunes and Monteiro, Marko}, - year = {2022}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {183}, - pages = {121903}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.121903}, - urldate = {2022-08-11}, - abstract = {A growing body of research is investigating the connections between the discursive construction of circular economy (CE) and its influences on public policies that promote the socio-technological transition towards circular production and consumption systems. However, surprisingly little attention has focused on how CE discourses interact with science, technology, and innovation (ST\&I) actors. To address this gap, this research adopts the prism of socio-technical imaginaries to understand specific visions of circularity in science and innovation, exploring how competing imaginaries mobilize specific actors, institutions, and visions of a greener future. Our empirical material included archival documentation from the Norwegian government and funded research projects on CE. Our analysis identified two key tension points within these imaginaries: ``International drivers versus regional and local transition arenas'' and ``Ecological modernization versus sectoral transformation.'' We suggest that tensions are inherent in CE socio-technical imaginaries but are often silenced or minimized by institutional discourses on circularity. Our findings suggest that official CE policy programs tend to minimize or overtly ignore criticisms and contestation that are increasingly raised in academic circles. Our findings indicate the need for increased involvement of ST\&I actors and other societal actors (such as NGOs and the private sector) in the CE policymaking process to avoid endless growth as an unexpected CE policy outcome.}, - langid = {english}, - keywords = {Circular economy,Discourse analysis,Environmental innovation,Environmental politics,Socio-technical imaginaries,Thematic analysis}, - file = {/Users/fabio/Zotero/storage/XNIZ7HMR/Hermann et al_2022_Socio-technical imaginaries of a circular economy in governmental discourse and.pdf;/Users/fabio/Zotero/storage/ED4ZJT62/S0040162522004267.html} -} - -@article{hermanPatternDiscoveryClimate2021, - title = {Pattern {{Discovery}} for Climate and Environmental Policy Indicators}, - author = {Herman, Kyle S. and Shenk, Justin}, - year = {2021}, - month = jun, - journal = {Environmental Science \& Policy}, - volume = {120}, - pages = {89--98}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.02.003}, - urldate = {2021-03-14} -} - -@article{hermosoEUBiodiversityStrategy2022, - title = {The {{EU Biodiversity Strategy}} for 2030: {{Opportunities}} and Challenges on the Path towards Biodiversity Recovery}, - author = {Hermoso, V. and Carvalho, S.B. and Giakoumi, S. and Goldsborough, D. and Katsanevakis, S. and Leontiou, S. and Markantonatou, V. and Rumes, B. and Vogiatzakis, I.N. and Yates, K.L.}, - year = {2022}, - month = jan, - journal = {Environmental Science \& Policy}, - volume = {127}, - pages = {263--271}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.10.028}, - urldate = {2021-11-30} -} - -@article{hernandez-diazHolisticIntegrationSustainability2021, - title = {Holistic Integration of Sustainability at Universities: {{Evidences}} from {{Colombia}}}, - author = {{Hern{\'a}ndez-Diaz}, Paula M. and Polanco, Jorge-Andr{\'e}s and {Escobar-Sierra}, Manuela and Filho, Walter Leal}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {127145}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127145}, - urldate = {2021-04-29} -} - -@article{hernandez-morcilloEmpiricalReviewCultural2013, - title = {An Empirical Review of Cultural Ecosystem Service Indicators}, - author = {{Hern{\'a}ndez-Morcillo}, M{\'o}nica and Plieninger, Tobias and Bieling, Claudia}, - year = {2013}, - month = jun, - journal = {Ecological Indicators}, - volume = {29}, - pages = {434--444}, - publisher = {{Elsevier}}, - issn = {1470160X}, - doi = {10.1016/j.ecolind.2013.01.013}, - urldate = {2021-04-23}, - abstract = {Over millennia human well-being has benefited from ecosystems, not only through tangible goods, but also through intangible assets known as cultural ecosystem services. Despite growing research over the last decade, cultural services assessment still remains arbitrary and is largely limited to marketable services such as tourism. Evident difficulties in standardizing definitions and measurements have challenged cultural services accounting in decision making processes. However, the imminent formation of the Intergovernmental Platform on Biodiversity and Ecosystem Services offers an opportunity to counterbalance this misrepresentation by establishing a scientific basis for consistently assessing cultural services. In that regard, the current review intends to facilitate discussion investigating the current state of cultural services accounting by offering an appraisal of existing evidence regarding cultural services indicator quality. The review builds on scientifically recognized frameworks to develop a holistic understanding of how cultural services indicators are conceived within ecosystem services research. Among the measures found, benefit indicators were most frequently used for assessing inspirational, educational and recreational services. A broad variety of methods for accounting cultural services was found, mainly due to the varied aims of the studies. Most of the cultural services indicators were deficient concerning their clarity of definitions, purposes and understanding of the processes to be measured and referring only marginally to tradeoffs and bundles with other services. Only 17\% performed multitemporal assessments and 23\% used spatially explicit information. It seems that indicator quality could be greatly enhanced by investing more effort toward involving relevant stakeholders in conceptualization and communication phases, using participatory mapping tools to enhance visibility. \textcopyright{} 2013 Elsevier Ltd All rights reserved.}, - keywords = {Accounting,Intergovernmental Platform on Biodiversity and Ecosystem Services (IPBES),Millennium ecosystem assessment,Non-material values} -} - -@article{Hernes2004, - title = {Studying {{Composite Boundaries}}: {{A Framework}} of {{Analysis}}}, - author = {Hernes, Tor}, - year = {2004}, - journal = {Human Relations}, - volume = {57}, - number = {1}, - pages = {9--29}, - issn = {0018-7267}, - doi = {10.1177/0018726704042712}, - abstract = {A basic tenet of this article is that the nature of an organization's or group's boundaries influences the ability of its members to exert influence on other organizations and groups. The organizations in the study are of different size and form, including an informal group, institutional sub-units, educational institutions, and a virtual organization. A framework of interpretation is developed to assist in the distinction between organizations on the basis of their boundary properties. The framework is applied to the setting up and development of a virtual organization. It is used to interpret how three key developments between the organizations were possible due to differences in their respective boundary characteristics. The findings are critiqued and implications are suggested.}, - isbn = {0018726704} -} - -@article{Herrfahrdt-Pahle2020, - title = {Sustainability Transformations: Socio-Political Shocks as Opportunities for Governance Transitions}, - author = {{Herrfahrdt-P{\"a}hle}, Elke and Schl{\"u}ter, Maja and Olsson, Per and Folke, Carl and Gelcich, Stefan and {Pahl-Wostl}, Claudia}, - year = {2020}, - journal = {Global Environmental Change}, - volume = {63}, - number = {November 2019}, - pages = {102097}, - publisher = {{Elsevier Ltd}}, - issn = {09593780}, - doi = {10.1016/j.gloenvcha.2020.102097}, - file = {/Users/fabio/Zotero/storage/C6WYJVT5/transitions.pdf} -} - -@article{herringtonUpdateLimitsGrowth2021, - title = {Update to Limits to Growth: {{Comparing}} the {{World3}} Model with Empirical Data}, - author = {Herrington, Gaya}, - year = {2021}, - month = jun, - journal = {Journal of Industrial Ecology}, - volume = {25}, - number = {3}, - pages = {614--626}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13084}, - urldate = {2022-01-25}, - abstract = {In the 1972 bestseller Limits to Growth (LtG), the authors concluded that, if global society kept pursuing economic growth, it would experience a decline in food production, industrial output, and ultimately population, within this century. The LtG authors used a system dynamics model to study interactions between global variables, varying model assumptions to generate different scenarios. Previous empirical-data comparisons since then by Turner showed closest alignment with a scenario that ended in collapse. This research constitutes a data update to LtG, by examining to what extent empirical data aligned with four LtG scenarios spanning a range of technological, resource, and societal assumptions. The research benefited from improved data availability since the previous updates and included a scenario and two variables that had not been part of previous comparisons. The two scenarios aligning most closely with observed data indicate a halt in welfare, food, and industrial production over the next decade or so, which puts into question the suitability of continuous economic growth as humanity's goal in the twenty-first century. Both scenarios also indicate subsequent declines in these variables, but only one\textemdash where declines are caused by pollution\textemdash depicts a collapse. The scenario that aligned most closely in earlier comparisons was not amongst the two closest aligning scenarios in this research. The scenario with the smallest declines aligned least with empirical data; however, absolute differences were often not yet large. The four scenarios diverge significantly more after 2020, suggesting that the window to align with this last scenario is closing.}, - keywords = {collapse,industrial ecology,limits to growth,system dynamics modeling,systems thinking,World3}, - file = {/Users/fabio/Zotero/storage/K2A6UDGQ/full-text.pdf} -} - -@article{herrmann-pillathUniversalCommonsEconomic2023, - title = {The Universal Commons: {{An}} Economic Theory of Ecosystem Ownership}, - shorttitle = {The Universal Commons}, - author = {{Herrmann-Pillath}, Carsten}, - year = {2023}, - month = jun, - journal = {Ecological Economics}, - volume = {208}, - pages = {107822}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107822}, - urldate = {2023-04-30}, - abstract = {A key question in ecological transformation is what the law can contribute, beyond mere regulatory schemes. One strand is defined by the `rights of nature' concept. Another emerging idea is to recognize living systems as property holders. This paper elaborates on the latter in presenting a new synthesis that is inspired by medieval conceptions of the commons: The new commons are regimes of co-habitation and shared access to land while assigning the ultimate property title to an ecosystem, represented by a trust with ecological fiduciary duties. This builds on distinguishing three modes of appropriation of land: possession, ownership, and property, which allows for differentiating various types of agencies of human and non-human members of an ecosystem. The `universal commons' is the legal form of appropriating land in a decentralized and local institutional regime, substituting for both public (sovereign) and private property claims on land. The paper sketches its basic features and ways to systemic transformation.}, - langid = {english}, - keywords = {Commons,Modes of Appropriation,More-Than-Human Property,Trusts}, - file = {/Users/fabio/Zotero/storage/44LBCZUM/Herrmann-Pillath_2023_The universal commons.pdf;/Users/fabio/Zotero/storage/5NZUJ9U6/S092180092300085X.html} -} - -@article{Herrmann2020, - title = {Urban Production: {{State}} of the Art and Future Trends for Urban Factories}, - author = {Herrmann, Christoph and Juraschek, Max and Burggr{\"a}f, Peter and Kara, Sami}, - year = {2020}, - journal = {CIRP Annals}, - volume = {69}, - number = {2}, - pages = {764--787}, - issn = {17260604}, - doi = {10.1016/j.cirp.2020.05.003}, - abstract = {Ongoing urbanization and increasing decentralization of production have increased interest in the urban factory concept. Urban factories are production systems located in an urban environment that make use of the unique resources and characteristics of their surroundings to create products locally with a potentially high degree of customer involvement. This paper explores key technologies and methods, enabling production in cities and requirements to expand and support the urban factory concept. Industry examples are presented to highlight the opportunity that urban factories provide to deliver better, more customizable products at a lower cost, lower environmental impact and shorter lead-time. In general, there are still high uncertainties on how the underlying physical and immaterial exchange flows of urban factories influence urban systems and vice versa. Technological solutions fostering positive urban production systems are mainly coming from single disciplinary backgrounds and are increasingly transferred to the application in urban production sites.}, - keywords = {Cyber-physical production systems,Sustainable development,Urban economics,Urban factories,Urban production}, - file = {/Users/fabio/Zotero/storage/WY5SBXD2/Urban manufacturing.pdf} -} - -@incollection{herrmannUrbanFactoriesIdentifying2019, - title = {Urban {{Factories}}: {{Identifying Products}} for {{Production}} in {{Cities}}}, - shorttitle = {Urban {{Factories}}}, - booktitle = {Technologies and {{Eco-innovation}} towards {{Sustainability I}}: {{Eco Design}} of {{Products}} and {{Services}}}, - author = {Herrmann, Christoph and Juraschek, Max and Kara, Sami and Thiede, Sebastian}, - editor = {Hu, Allen H. and Matsumoto, Mitsutaka and Kuo, Tsai Chi and Smith, Shana}, - year = {2019}, - pages = {185--198}, - publisher = {{Springer}}, - address = {{Singapore}}, - doi = {10.1007/978-981-13-1181-9_15}, - urldate = {2022-10-05}, - abstract = {Rapid urbanization has forced to change not only the shape of growing cities but also the location and appearance of factories. This development is closely linked to more sustainable products and production and will subsequently affect the production systems. It is envisaged that factories and distributed production sites will be able to move back to the city through cleaner and more sustainable production processes. There is, however, a dearth of research into investigating suitability of existing products that can be produced in an urban environment. Therefore, this paper explores a possible approach to identify the suitability of products to be produced in urban environments based on the generic attributes of products which shape their corresponding manufacturing systems and their economic, environmental, and social impact on the urban environment. It allows matching of products to cities in order to create combinations of products and factories with suitable urban areas that positively benefit both industry and cities and supports the design of products for urban factories.}, - isbn = {9789811311819}, - langid = {english}, - keywords = {Positive impact factory,Sustainable urban production,Urban factories} -} - -@article{Hervas-Oliver2021, - title = {Technological Innovation Typologies and Open Innovation in {{SMEs}}: {{Beyond}} Internal and External Sources of Knowledge}, - author = {{Hervas-Oliver}, Jose-Luis and {Sempere-Ripoll}, Francisca and {Boronat-Moll}, Carles}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120338}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120338}, - urldate = {2020-10-05}, - abstract = {SME inbound open innovation has primarily received attention for new product development, overlooking the fact that SMEs may also pursue process or, simultaneously, product and process innovation. We posit that different technological innovation typologies (product vs process) are related to distinct search strategies. Focusing on 3,867 innovative SMEs, results indicate that inbound open innovation is not only related to internal resources of innovation but also to the type of technological innovation chosen by firms. Our results disentangle a rather more complex and comprehensive view of SME inbound open innovation that prevents the fragmentation of results. It is not just about being more or less innovative, but about how SMEs innovate differently, developing distinct internal and external activities.}, - keywords = {Inbound open innovation,Innovation strategy,Technological innovation}, - file = {/Users/fabio/Zotero/storage/2Q2BMU4X/full-text.pdf} -} - -@article{Herzberger2019, - title = {Polymer {{Design}} for {{3D Printing Elastomers}}: {{Recent Advances}} in {{Structure}}, {{Properties}}, and {{Printing}}}, - author = {Herzberger, Jana and Sirrine, Justin M. and Williams, Christopher B. and Long, Timothy E.}, - year = {2019}, - month = oct, - journal = {Progress in Polymer Science}, - volume = {97}, - pages = {101144}, - publisher = {{Elsevier B.V.}}, - issn = {00796700}, - doi = {10.1016/j.progpolymsci.2019.101144}, - abstract = {Elastomers are a unique and important class of polymers that enjoy applications in virtually every industry, including healthcare, aerospace, automotive, and apparel. However, due to inherent physical, thermal, and mechanical properties of elastomers, the additive manufacturing (AM) of elastomers remains challenging. These challenges are discussed in the context of various AM processes, including powder bed fusion, material extrusion, and vat photopolymerization. This review provides an in-depth discussion of the current state of silicone and polyurethane polymers for AM, and also discusses polyesters/polycarbonates, liquid crystalline elastomers, and monomer compositions that provide elastomeric properties upon photocuring. Finally, the current state of common, commercially-available elastomers for AM is provided, as well as an outlook for this rapidly progressing field. We expect this review to be useful for any research involved with the additive manufacturing of elastomers.}, - file = {/Users/fabio/Zotero/storage/N9SNZGWC/Polymer Design for 3D Printing Elastomers- Recent Advances in Structure, Properties, and Printing.pdf} -} - -@article{Heshmati2017, - title = {A Review of the Circular Economy and Its Implementation}, - author = {Heshmati, Almas}, - year = {2017}, - journal = {International Journal of Green Economics}, - volume = {11}, - number = {3/4}, - pages = {251}, - issn = {1744-9928}, - doi = {10.1504/IJGE.2017.089856} -} - -@article{heshmatiAssessmentUrbanCircular2021, - title = {Assessment of the Urban Circular Economy in {{Sweden}}}, - author = {Heshmati, Almas and Rashidghalam, Masoomeh}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {310}, - pages = {127475}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127475}, - urldate = {2021-06-08}, - abstract = {This study proposes a general standard for the circular economy (CE), and estimates a multidimensional parametric index composed of eight components which is in line with the principles of a circular economy. The concept and index are used for evaluating the practices of a circular economy at the municipality level. The index is regressed on a number of indicators influencing the level and development of circular economy. The empirical analysis is based on data from 273 municipalities in Sweden observed 2012\textendash 18. The results suggest that there are significant differences between the municipalities in the CE index and its sub-components. Variations in the index's level are mainly attributed to their regional location, population size and density, concentration of industries, and investment programs in the circular economy's infrastructure. At a disaggregate level, the municipalities of Gotland, H\"arjedalen, and M\"orbyl\aa nga performed well in the CE index. In contrast, Stockholm, Uppsala, and Burl\"ov municipalities had the lowest ranks in the CE index. The index had a growth rate of 9.7 percent over 7~years~at an average annual growth rate of 1.3 percent. One policy implication of these results is that each municipality should implement a policy adapted to the sectorial structure of its economy and availability of resources. The central government should apply strict environmental regulations and provide necessary incentives for achieving environmental quality objectives. Incentive programs can target a wider application of technologies and policies used by the best performing municipalities and provide support in transferring knowledge and resources for strengthening the weak performing municipalities.} -} - -@article{Hess2019, - title = {Climate Change Belief, Sustainability Education, and Political Values: {{Assessing}} the Need for Higher-Education Curriculum Reform}, - author = {Hess, David J. and Maki, Alexander}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {228}, - pages = {1157--1166}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.291}, - urldate = {2020-05-21}, - abstract = {Educational attainment is generally a strong predictor of belief in climate change, but prior research indicates that for political conservatives a college education is not always associated with increased belief. Conservatives in several countries, especially those in populist parties, have shown skepticism toward climate-mitigation policies and in some cases toward climate science. The study contributes to theories of environmental belief by examining two mechanisms for the low effect of the college education on climate belief for conservatives: selective exposure bias (students avoid courses that challenge their beliefs) and resistance to belief change (students reject or filter information that is incompatible with their political orientation). Using a survey of college-educated adults in the U.S., the study finds strong evidence for selective exposure bias and mixed evidence for resistance to belief change. Importantly, approximately one-third of conservative students who took a college course with climate-change content shifted from initial skepticism or uncertainty to a more confident belief. Moreover, exposure to an education with a core curriculum is associated with stronger belief. The study provides support for the policy goal of a curricular requirement for climate education, which can overcome selective exposure bias and, for some students, resistance to belief change.}, - keywords = {Climate change,College,Conservatives,Core curriculum,Education} -} - -@article{Hesse2018, - title = {Can Psychology Walk the Walk of Open Science?}, - author = {Hesse, Bradford W.}, - year = {2018}, - month = feb, - journal = {American Psychologist}, - volume = {73}, - number = {2}, - pages = {126--137}, - publisher = {{American Psychological Association Inc.}}, - issn = {0003066X}, - doi = {10.1037/amp0000197}, - urldate = {2020-03-27}, - abstract = {An "open science movement" is gaining traction across many disciplines within the research enterprise but is also precipitating consternation among those who worry that too much disruption may be hampering professional productivity. Despite this disruption, proponents of open data collaboration have argued that some of the biggest problems of the 21st century need to be solved with the help of many people and that data sharing will be the necessary engine to make that happen. In the United States, a national strategic plan for data sharing encouraged the federally funded scientific agencies to (a) publish open data for community use in discoverable, machinereadable, and useful ways; (b) work with public and civil society organizations to set priorities for data to be shared; (c) support innovation and feedback on open data solutions; and (d) continue efforts to release and enhance high-priority data sets funded by taxpayer dollars. One of the more visible open data projects in the psychological sciences is the presidentially announced "Brain Research Through Advancing Innovative Neurotechnologies" (BRAIN) initiative. Lessons learned from initiatives such as these are instructive both from the perspective of open science within psychology and from the perspective of understanding the psychology of open science. Recommendations for creating better pathways to "walk the walk" in open science include (a) nurturing innovation and agile learning, (b) thinking outside the paradigm, (c) creating simplicity from complexity, and (d) participating in continuous learning evidence platforms.}, - keywords = {Big data,Culture of science,Data sharing,Open science} -} - -@article{hesseTrashTreasureAdditive2023, - title = {From Trash to Treasure in Additive Manufacturing: {{Recycling}} of Polymer Powders by Acid Catalyzed Hydrolysis}, - shorttitle = {From Trash to Treasure in Additive Manufacturing}, - author = {Hesse, Nicolas and Jaksch, Andreas and Kaschta, Joachim and Groh, Dominik and Drummer, Dietmar and Peukert, Wolfgang and Schmidt, Jochen}, - year = {2023}, - month = may, - journal = {Additive Manufacturing}, - pages = {103591}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2023.103591}, - urldate = {2023-05-11}, - abstract = {A persistent problem in laser powder bed fusion (PBF) additive manufacturing (AM) of polymers is the accumulation of used feedstock material that cannot be reprocessed due to alterations in the physical and chemical structure upon ageing at elevated temperatures. The chemical ageing of polyamide 12, the most frequently used feedstock in PBF of polymers, occurs due to solid-state post-condensation during the AM process and can be reversed by appropriate processing. This paper investigates the application of acid-catalyzed hydrolytic reconditioning to restore virgin powder properties from used and annealed feedstock material, highlighting a pathway to more sustainability in AM. The proposed method is optimized towards PBF-printing relevant properties and mechanical characteristics of parts build with the recycled feedstock material, which are benchmarked against conventional powder refreshing strategies.}, - langid = {english}, - keywords = {hydrolysis,polyamide 12,polymer ageing,polymer recycling,powder bed fusion,powder characterization}, - file = {/Users/fabio/Zotero/storage/5BK6EFPA/Hesse et al. - 2023 - From trash to treasure in additive manufacturing .pdf;/Users/fabio/Zotero/storage/E3S5XRPI/S221486042300204X.html} -} - -@article{heSustainableBusinessModeling2021, - title = {Sustainable Business Modeling: {{The}} Need for Innovative Design Thinking}, - author = {He, Jiantong and Ortiz, Jaime}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {298}, - pages = {126751}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126751}, - urldate = {2021-04-29}, - abstract = {Innovation within the development of sustainable business models has become a hot topic but it is affected by a high failure rate due to a lack of reliable and efficient methods. This paper focuses explicitly on the importance of using bespoke methods in the process of designing sustainable and innovative business models to face an even more uncertain business climate. It revisits the concept of sustainable business models, sustainable business model innovation and design thinking, through a synthesis of the literature. Subsequently, this paper presents a design framework consisting of portrayal, exploration, prototype, and evaluation. Using the Tuotuo Community as a case study, our research results demonstrate the need for the application of design thinking to sustainable business model innovation. However, one single case study is not enough to uncover all the problems related to sustainable business model innovation. Consequently, this paper advises on the specific characteristics of design thinking implementation and presents key practical points for business survival.}, - keywords = {Business model innovation,Design thinking,Iteration cycle,Sustainable business model,Sustainable development,Value proposition} -} - -@article{Heyer2014, - title = {Enabling of Local Value Creation via Openness for Emergent Synthesis}, - author = {Heyer, Steffen and Nishino, Nariaki and Muschard, Bernd and Seliger, G{\"u}nther}, - year = {2014}, - month = jul, - journal = {International Journal of Precision Engineering and Manufacturing}, - volume = {15}, - number = {7}, - pages = {1489--1493}, - issn = {2234-7593}, - doi = {10.1007/s12541-014-0496-5}, - abstract = {not available}, - keywords = {Additive manufacturing,Emergent synthesis,Recycling,Social sustainability}, - file = {/Users/fabio/Zotero/storage/TE6I3JGX/Heyer et al. - 2014 - Enabling of local value creation via openness for emergent synthesis.pdf} -} - -@book{hibbelerMechanicsMaterials2011, - title = {Mechanics of Materials}, - author = {Hibbeler, R. C.}, - year = {2011}, - edition = {8th ed}, - publisher = {{Prentice Hall}}, - address = {{Boston}}, - isbn = {978-0-13-602230-5}, - langid = {english}, - lccn = {TA405 .H47 2011}, - keywords = {Materials,{Mechanics, Applied},{Problems, exercises, etc},Strength of materials,Structural analysis (Engineering)}, - file = {/Users/fabio/Zotero/storage/6S7E5NZP/Hibbeler - 2011 - Mechanics of materials.pdf} -} - -@article{hicksPersonalRespiratoryProtection2020, - title = {Personal Respiratory Protection and Resiliency in a Pandemic, the Evolving Disposable versus Reusable Debate and Its Effect on Waste Generation}, - author = {Hicks, Andrea and {Temizel-Sekeryan}, Sila and Kontar, Wissam and Ghamkhar, Ramin and Rodr{\'i}guez Morris, M{\'o}nica}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {168}, - pages = {105262}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105262}, - urldate = {2021-03-08}, - abstract = {The COVID-19 pandemic sweeping much of the globe is not anticipated to be short in duration, with contingency plans suggesting that it may last at least eighteen months. In the United States, one of the critical issues in coping with the pandemic has been a lack of essential personal protective equipment (PPE), at the local, state, and national level. As COVID-19 is primarily transferred through respiratory routes, adequate respiratory protection is a dire necessity. The shift from durable and reusable medical supplies in recent years to their single use counterparts has reduced the resiliency of the medical system with respect to PPE and other critical supplies in the current pandemic. This work explores the role of reusable compared to single use respiratory protection in the current pandemic, including reprocessing of single use options, from the perspective of number of equivalent protection devices needed. The current state of literature is also reviewed to provide context to this work, with respect to resource procurement. The economic cost of PPE throughout a pandemic is explored, and it is found that utilizing reusable PPE options depending on filter cycling may be less costly. Increased waste production is another issue with the current pandemic, and this is explored utilizing a mass basis, finding that reusable respiratory PPE would generate less waste than using single use PPE in a business as usual scenario. As future outbreaks of COVID-19 are likely along with other future pandemics, this work provides insights at how to prepare from the standpoint of PPE, and in particular respiratory protection.} -} - -@article{hidalgo-carvajalRecycledPLA3D2023, - title = {Recycled {{PLA}} for {{3D Printing}}: {{A Comparison}} of {{Recycled PLA Filaments}} from {{Waste}} of {{Different Origins}} after {{Repeated Cycles}} of {{Extrusion}}}, - shorttitle = {Recycled {{PLA}} for {{3D Printing}}}, - author = {{Hidalgo-Carvajal}, David and Mu{\~n}oz, {\'A}lvaro Hortal and {Garrido-Gonz{\'a}lez}, Jos{\'e} J. and {Carrasco-Gallego}, Ruth and Alc{\'a}zar Montero, Victoria}, - year = {2023}, - month = jan, - journal = {Polymers}, - volume = {15}, - number = {17}, - pages = {3651}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2073-4360}, - doi = {10.3390/polym15173651}, - urldate = {2023-09-07}, - abstract = {The objective of this work is to evaluate the reprocessing of PLA 3D printing waste from different origins, into filaments and films, and without the addition of any additive. Two types of waste were considered: a blend of different printing wastes (masks, visors, other components) of personal protective equipment coming from an association of Spanish coronamakers, and PLA waste from a single known commercial source. Both types of materials were subjected to repeated extrusion cycles and processed into films by compression molding. Samples were characterized after each cycle and their mechanical and viscosity properties evaluated. Diffusion-ordered NMR spectroscopy (DOSY) experiments were also carried out to estimate molecular weights. The results show a better performance for the PLA waste from the known origin, capable of withstanding up to three re-extrusion cycles per two for the waste blending, without significant degradation. Additionally, a model to address collection and mechanical recycling cycles under two different scenarios (full traceability and not full traceability) was proposed.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {circular economy,distributed recycling,DOSY,re-extrusion cycles,recycled PLA filaments}, - file = {/Users/fabio/Zotero/storage/44ZPJNNH/Hidalgo-Carvajal et al_2023_Recycled PLA for 3D Printing.pdf} -} - -@article{Hienerth2014, - title = {User Community vs. Producer Innovation Development Efficiency: {{A}} First Empirical Study}, - author = {Hienerth, Christoph and {von Hippel}, Eric and Berg Jensen, Morten}, - year = {2014}, - month = feb, - journal = {Research Policy}, - volume = {43}, - number = {1}, - pages = {190--201}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2013.07.010}, - abstract = {In this paper we report upon a first empirical exploration of the relative efficiency of innovation development by product users vs. product producers. In a study of over 50 years of product innovation in the whitewater kayaking field, we find users in aggregate were approximately 3\texttimes{} more efficient at developing important kayaking product innovations than were producers in aggregate. We speculate that this result is driven by what we term "efficiencies of scope" in problem-solving. These can favor an aggregation of many user innovators, each spending a little, over fewer producer innovators benefitting from higher economies of scale in product development. We also note that the present study explores only one initial point on what is likely to be a complex efficiency landscape. \textcopyright{} 2013 Elsevier B.V. All rights reserved.}, - keywords = {Efficiency measurement,Industry development,User innovation}, - file = {/Users/fabio/Zotero/storage/CS6LFAFP/User community vs. producer innovation development efficiency- A first empirical study.pdf} -} - -@article{hietscholdWhoPutNO2020, - title = {Who Put the ``{{NO}}'' in {{Innovation}}? {{Innovation}} Resistance Leaders' Behaviors and Self-Identities}, - author = {HIETSCHOLD, {\relax NADINE} and REINHARDT, {\relax RONNY} and GURTNER, {\relax SEBASTIAN}}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120177}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120177}, - urldate = {2020-07-20}, - abstract = {Individuals can exert strong influence on the fate of innovations. However, we know little about the most conspicuous market actors who resist innovations: innovation resistance leaders. We define innovation resistance leaders as figureheads in media and as active opponents who act against an innovation to exert influence at the societal level. To understand their role, we seek to answer the following questions: How do innovation resistance leaders engage in resistance, and who are these leaders? Our exploratory qualitative analysis of eight resistance cases reveals the following two behaviorally distinct resistance leader types. Initiators are among the first people to notice a problem after an innovation launch, and they scale up a resistance movement through the media (i.e., they organize a resistance initiation process), whereas Aggregators join an existing movement after a critical mass of negative voices has been reached (i.e., they organize a resistance aggregation process). Regarding resistance leaders' self-identities, Initiators tend to have a missionary social identity while Aggregators tend to have a consumerist one. We contribute to innovation resistance and adoption as well as innovation diffusion literature by conceptualizing a new type of resister who, based on their self-identity, performs two distinct and newly identified resistance diffusion processes.}, - keywords = {Innovation adoption,Innovation diffusion,Innovation management,Innovation resistance,Resistance leaders}, - file = {/Users/fabio/Zotero/storage/7FJEUKW5/full-text.pdf} -} - -@article{Higher, - title = {Changemaker Institutions}, - author = {Higher, How and Can, Education and Culture, Transform Campus}, - file = {/Users/fabio/Zotero/storage/FUZR7DUC/Higher et al_Changemaker institutions.pdf} -} - -@article{Hiller2009, - title = {Fully {{Recyclable Multi-Material Printing}}}, - author = {Hiller, Jonathan D and Lipson, Hod}, - year = {2009}, - journal = {Solid Freeform Fabrication Symposium (SFF'09)}, - pages = {98--106}, - abstract = {Recycling is often a costly and inefficient process, particularly for objects composed of multiple integrated materials. Here, we demonstrate a freeform fabrication system that prints with fully reusable physical voxels and minimal recycling effort. This new paradigm of digital (discrete) matter enables any number of materials to be printed together in any configuration. The individual voxels may then be reclaimed at will by dissolving the bonds holding the structure together. Coupled with a compatible voxel sorting process, we demonstrate multiple generations of freeform fabricated objects using the same physical material. This opens the door to a flexible desktop fabrication process in which 3D multi-material objects are fully recyclable and re-usable with minimal infrastructure.}, - file = {/Users/fabio/Zotero/storage/7W6R6JUI/m-api-72596f4d-b67b-ff95-48b2-e89897cb8263.pdf} -} - -@article{hilmarsdottirIdentificationEnvironmentalHotspots2022, - title = {Identification of Environmental Hotspots in Fishmeal and Fish Oil Production towards the Optimization of Energy-Related Processes}, - author = {Hilmarsd{\'o}ttir, Gudrun Svana and {\"O}gmundarson, {\'O}lafur and Arason, Sigurj{\'o}n and Gudj{\'o}nsd{\'o}ttir, Mar{\'i}a}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {343}, - pages = {130880}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2022.130880}, - urldate = {2022-03-13}, - abstract = {This study assessed the environmental impacts of a pelagic fishmeal and fish oil production plant in Iceland with the life cycle assessment methodology. The study focused on assessing the effects of different energy sources for utility production due to the high energy intensity of fishmeal and fish oil production, as quality improved with lower cooking temperature. The environmental hotspots of three different processing scenarios were assessed, where the factory was run on hydropower (Scenario 0), heavy fuel (Scenario 1) and a composition of both (Scenario 2), from cradle-to-factory gate. Midpoint results showed that the raw material acquisition contributed the most to the environmental impact when the fishmeal factory was operating on hydropower. However, drying had the highest impact when heavy fuel oil was used for utility production. This study also demonstrated that lowering the cooking temperature from 90 to 85 \textdegree C, led to improved quality and simultaneously reduced environmental impacts during processing. This indicated that a small energy adjustment in the production can have an environmental gain, demonstrating the necessity to optimize each processing step in the fishmeal and fish oil production process both for increased product quality and minimizing environmental impacts.}, - file = {/Users/fabio/Zotero/storage/KW8AHNZL/full-text.pdf} -} - -@article{Himmer1999, - title = {Lamination of Metal Sheets}, - author = {Himmer, T. and Nakagawa, T. and Anzai, M.}, - year = {1999}, - journal = {Computers in Industry}, - volume = {39}, - number = {1}, - pages = {27--33}, - issn = {01663615}, - doi = {10.1016/S0166-3615(98)00122-5}, - abstract = {This paper describes a manufacturing process to produce injection molding tools by lamination of aluminum alloy sheets. The process involves design of the tool using 3D CAD modeling, slicing of the data into cross sections, laser beam cutting of the sheets into 2D profiles, lamination, bonding, milling and finishing. This technology allows to include complex cooling channels in order to achieve a significant reduction of the cycle time and to control the cooling process. Because of the low bonding temperature and force, large tools can be made in a time- and cost-effective manner. The manufacturing system is similar to the technology developed by Nakagawa et al.; however, the used sheet material is different and therefore, the bonding method. In this article, the introduced bonding technique, laser cutting, milling and other important parameters such as bonding strength are discussed.}, - isbn = {0166-3615}, - keywords = {3d cad modeling,injection molding tool,laminated object manufacturing,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/TQMQM8PT/Himmer, Nakagawa, Anzai - 1999 - Lamination of metal sheets.pdf} -} - -@article{hinesGuidingForesightFuture2021, - title = {Guiding {{Foresight}} into the {{Future}}}, - author = {Hines, Andy}, - year = {2021}, - month = jun, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102784}, - urldate = {2021-06-24} -} - -@article{hintonFiveKeyDimensions2021, - title = {Five Key Dimensions of Post-Growth Business: {{Putting}} the Pieces Together}, - author = {Hinton, Jennifer}, - year = {2021}, - month = aug, - journal = {Futures}, - volume = {131}, - pages = {102761}, - publisher = {{Elsevier BV}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102761}, - urldate = {2021-06-08}, - abstract = {As there has been no evidence of the kind of environmental decoupling necessary to allow for green economic growth, academic and activist discussions alike have turned to exploring post-growth pathways. Such a transformation entails a significant shift in economic institutions, yet post-growth analyses of what is problematic about businesses and how to resolve these issues are piecemeal. This article offers an overview and synthesis of key findings in the emerging post-growth business literature. Using institutional analysis, it develops a framework that conceptually ties together five dimensions of business that have been identified as most important for post-growth transformations: relationship-to-profit, incorporation structure, governance structure, strategy, and size and geographical scope. The intention of developing this five-dimensions framework is to offer a more coherent and concrete theoretical basis for ongoing discussions about which types of business are compatible, or incompatible, with post-growth pathways.}, - file = {/Users/fabio/Zotero/storage/4V5B3PVV/full-text.pdf} -} - -@article{Hirscher2018, - title = {Social Manufacturing in the Fashion Sector: {{New}} Value Creation through Alternative Design Strategies?}, - author = {Hirscher, Anja-Lisa and Niinim{\"a}ki, Kirsi and Joyner Armstrong, Cosette M.}, - year = {2018}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {172}, - pages = {4544--4554}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.11.020}, - file = {/Users/fabio/Zotero/storage/4EQA9QX7/Social manufacturing in the fashion sector- New value creation through alternative design strategies.pdf} -} - -@article{Hischier2020, - title = {Environmental Impacts of Household Appliances in {{Europe}} and Scenarios for Their Impact Reduction}, - author = {Hischier, Roland and Reale, Francesca and Castellani, Valentina and Sala, Serenella}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {121952}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121952}, - urldate = {2020-05-27}, - file = {/Users/fabio/Zotero/storage/ASKEVGZ2/full-text.pdf} -} - -@article{hmeidatMechanicalAnisotropyPolymer2020, - title = {Mechanical Anisotropy in Polymer Composites Produced by Material Extrusion Additive Manufacturing}, - author = {Hmeidat, Nadim S. and Pack, Robert C. and Talley, Samantha J. and Moore, Robert B. and Compton, Brett G.}, - year = {2020}, - month = aug, - journal = {Additive Manufacturing}, - volume = {34}, - pages = {101385}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101385}, - urldate = {2020-06-22} -} - -@article{hobsonConsumptionWorkCircular2021, - title = {Consumption {{Work}} in the Circular Economy: {{A}} Research Agenda.}, - author = {Hobson, Kersty and Holmes, Helen and Welch, Dan and Wheeler, Katy and Wieser, Harald}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {321}, - pages = {128969}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128969}, - urldate = {2021-09-15} -} - -@article{hofmanExpandingScopeReproducibility2021, - title = {Expanding the Scope of Reproducibility Research through Data Analysis Replications}, - author = {Hofman, Jake M. and Goldstein, Daniel G. and Sen, Siddhartha and {Poursabzi-Sangdeh}, Forough and Allen, Jennifer and Dong, Ling Liang and Fried, Brenda and Gaur, Harpreet and Hoq, Adnan and Mbazor, Emeka and Moreira, Naomi and Muso, Cindy and Rapp, Etta and Terrero, Roymil}, - year = {2021}, - month = may, - journal = {Organizational Behavior and Human Decision Processes}, - volume = {164}, - pages = {192--202}, - publisher = {{Academic Press Inc.}}, - issn = {07495978}, - doi = {10.1016/j.obhdp.2020.11.003}, - urldate = {2021-04-29}, - abstract = {In recent years, researchers in several scientific disciplines have become concerned with published studies replicating less often than expected. A positive side effect of this concern is an appreciation that replicating other researchers' work is an essential part of the scientific process. To date, many such efforts have come from the experimental sciences, where replication entails running new experiments, generating new data, and analyzing it. In this article, we emphasize not experimental replications but data analysis replications. We do so for three reasons. First, experimental replication excludes entire classes of publications that do not run experiments or even collect original data (e.g., archival data analysis). Second, experimental replication may in some cases be a needlessly high bar: there is great value in replicating just the data analyses of published experimental work. As data analysis replications require a lower investment of resources than experimental replications, their adoption should expand the number and variety of scientific reproducibility studies undertaken. Third, we propose that teaching undergraduate students to perform data analysis replications will greatly increase the number of replications done while providing them with research experience that should inform their decisions to pursue research or to attend graduate school. Towards this end, we provide details of a pilot program we created to teach undergraduates the skills necessary to conduct data analysis replications, and include a case study of the first set of students who completed this program and attempted to replicate the data analyses in a widely-cited social science paper on policing. In addition, we present a summary of ten additional data analysis replications carried out entirely by students in a university course.}, - keywords = {Data analysis,Education,Replication,Reproducibility,Robustness} -} - -@article{Hofmann2014, - title = {{{3D}} Printing Gets a Boost and Opportunities with Polymer Materials}, - author = {Hofmann, Manfred}, - year = {2014}, - journal = {ACS Macro Letters}, - volume = {3}, - number = {4}, - pages = {382--386}, - issn = {21611653}, - doi = {10.1021/mz4006556}, - abstract = {3D printing has recently gained much attention from media and the scientific community, touted as a replacement for traditional manufacturing and a potential to change the way we develop, produce, market, and distribute all sorts of products. With a short introduction to the general idea and initial development of rapid prototyping, we have a look at the prevalent technologies which are now summarized as 3D printing, each with its specific properties and reliance on the materials adapted to the automated application process. Polymers in various forms, reactive, liquid solutions, or as thermoplastic melts, play a key role in many applications and the further expansion toward manufacturing robust, real end use products.\textbackslash n3D printing has recently gained much attention from media and the scientific community, touted as a replacement for traditional manufacturing and a potential to change the way we develop, produce, market, and distribute all sorts of products. With a short introduction to the general idea and initial development of rapid prototyping, we have a look at the prevalent technologies which are now summarized as 3D printing, each with its specific properties and reliance on the materials adapted to the automated application process. Polymers in various forms, reactive, liquid solutions, or as thermoplastic melts, play a key role in many applications and the further expansion toward manufacturing robust, real end use products.}, - isbn = {2161-1653}, - file = {/Users/fabio/Zotero/storage/Q649VQ9W/3D printing gets a boost and opportunities with polymer materials.pdf} -} - -@article{Hofmann2019, - title = {Circular Business Models: {{Business}} Approach as Driver or Obstructer of Sustainability Transitions?}, - author = {Hofmann, Florian}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {224}, - pages = {361--374}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.115}, - urldate = {2020-03-21}, - abstract = {In times of climate change, biodiversity loss, or growing natural resource scarcity, the circular business model (CBM) concept is increasingly attractive, promoting the reorganization of current value creation architectures and supply chains toward a sustainable system of production and consumption. Driven by a vision of continued economic expansion and growth on a planet with finite natural resources, CBMs are endorsed by political institutions, multinational corporations, business consultancies, and academia. Some argue that CBM configurations contribute to a more holistic and radical change in the existing business logics than approaches that achieve incremental resource efficiency improvements. However, how ``holistic'' and ``radical'' are CBMs theoretically constituted in academia if we consider the deep structural and paradigmatic shifts in societies necessary to deal with the challenges associated with the Anthropocene? Prior studies do not examine the inherent normative settings and the operational change approaches beneath CBM concepts. To reconstruct the theoretical foundations of CBMs critically, the recent CBM body of academic literature is systematically reviewed according to (1) the legitimacy of CBMs (why should it be done) (2) the modes of value creation and offerings (what should be done), and (3) the core principles of CBM integration into daily business (how should it be done). From this synthesis, the predominant notion of sustainability behind the CBM concept can be revealed. This study argues contemporary scientifically constructed CBMs need to be reconsidered if they are intended to contribute to a profound economic transition toward sustainability. Hence, the paper shows how principles from more ``holistic'', ``radical'', and pluralistic economic approaches can widen CBMs and how future research can help to diversify the concept.}, - keywords = {Business model innovation,Circular business model,Circular economy,Sustainability transitions,Sustainable business model} -} - -@article{hofmannCircularEconomyEconomic2022, - title = {Circular {{Economy}} and Economic (de-)Growth? {{Let}}'s Shift the Baselines!}, - shorttitle = {Circular {{Economy}} and Economic (de-)Growth?}, - author = {Hofmann, Florian}, - year = {2022}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {187}, - pages = {106604}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106604}, - urldate = {2022-09-18}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/NAQ2GSKK/Hofmann_2022_Circular Economy and economic (de-)growth.pdf;/Users/fabio/Zotero/storage/LS7S58XF/S0921344922004384.html} -} - -@article{Hofstatter2017, - title = {State-of-the-Art of Fiber-Reinforced Polymers in Additive Manufacturing Technologies}, - author = {Hofst{\"a}tter, Thomas and Pedersen, David B and Tosello, Guido and Hansen, Hans N}, - year = {2017}, - month = aug, - journal = {Journal of Reinforced Plastics and Composites}, - volume = {36}, - number = {15}, - pages = {1061--1073}, - issn = {0731-6844}, - doi = {10.1177/0731684417695648}, - abstract = {Additive manufacturing technologies have received a lot of attention in recent years for their use in multiple materials such as metals, ceramics, and polymers. The aim of this review article is to analyze the technology of fiber-reinforced polymers and its implementation with additive manufacturing. This article reviews recent developments, ideas, and state-of-the-art technologies in this field. Moreover, it gives an overview of the materials currently available for fiber-reinforced material technology.}, - file = {/Users/fabio/Zotero/storage/Y9UI975I/State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies.pdf} -} - -@article{hofstedeDimensionalizingCulturesHofstede2011, - title = {Dimensionalizing {{Cultures}}: {{The Hofstede Model}} in {{Context}}}, - author = {Hofstede, Geert}, - year = {2011}, - month = dec, - journal = {Online Readings in Psychology and Culture}, - volume = {2}, - number = {1}, - publisher = {{Grand Valley State University Libraries}}, - doi = {10.9707/2307-0919.1014}, - urldate = {2022-03-13}, - abstract = {This article describes briefly the Hofstede model of six dimensions of national cultures: Power Distance, Uncertainty Avoidance, Individualism/Collectivism, Masculinity/Femininity, Long/ Short Term Orientation, and Indulgence/Restraint. It shows the conceptual and research efforts that preceded it and led up to it, and once it had become a paradigm for comparing cultures, research efforts that followed and built on it. The article stresses that dimensions depend on the level of aggregation; it describes the six entirely different dimensions found in the Hofstede et al. (2010) research into organizational cultures. It warns against confusion with value differences at the individual level. It concludes with a look ahead in what the study of dimensions of national cultures and the position of countries on them may still bring.} -} - -@article{Hogan2020, - title = {Personality Theory and the Nature of Human Nature}, - author = {Hogan, Robert and Sherman, Ryne A.}, - year = {2020}, - month = jan, - journal = {Personality and Individual Differences}, - volume = {152}, - pages = {109561}, - issn = {01918869}, - doi = {10.1016/j.paid.2019.109561} -} - -@article{hoImprovingAdhesionProperties2022, - title = {Improving the Adhesion and Properties in the Material Extrusion of Polypropylene by Blending with a Polyolefin Elastomer}, - author = {Ho, Quang Binh and Kontopoulou, Marianna}, - year = {2022}, - month = apr, - journal = {Additive Manufacturing}, - pages = {102818}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102818}, - urldate = {2022-04-11} -} - -@article{holdawayWisingJazzMetamorphosis2023, - title = {Wising up {{Through Jazz}} and the {{Metamorphosis}} of {{Perception}}}, - author = {Holdaway, Marcelle}, - year = {2023}, - month = jan, - journal = {Futures}, - pages = {103111}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2023.103111}, - urldate = {2023-02-09}, - abstract = {Today's postnormal times marked by `complexity, contradictions and chaos' require wisdom to heal ourselves and the planet. That wisdom is currently hidden, and a contribution to ignorance is epistemologies that are split into disciplinary silos. There has long been various theories and practices applied to `expand' consciousness to access wisdom, and we draw upon one such practice that continues to be espoused by respected scholars today. Consequently, this paper argues for a pathway to wisdom that engages imagination and reveals alternative narratives through visual textual images that metaphors provide. The metaphor applied was jazz in its many expressions serving to `paint a picture' of various disciplinary approaches in exploring potential perceptive and transformed knowledge systems. The critical futures research methodology, causal layered analysis (CLA) was applied to knowledges including mono-, multi-, inter-, trans and post disciplinarity. Mapping past, present and future led to a transformed future of radical new knowledges, the plausibility of which was examined through another futures methodology, the Futures Triangle. Potential pathways towards skills and knowledge-building were made visible through metaphor. This is but one pathway to consider in taking us beyond limited boundaries and ignorance towards unity and the wisdom so needed.}, - langid = {english}, - keywords = {consciousness,critical futures methodologies,imagination,metaphor,postnormal times,transformed knowledge systems}, - file = {/Users/fabio/Zotero/storage/KAK6VNZH/S0016328723000149.html} -} - -@article{Holdsworth2019, - title = {The Assessment of Graduate Sustainability Attributes in the Workplace: {{Potential}} Advantages of Using the Theory of Planned Behaviour ({{TPB}})}, - author = {Holdsworth, Sarah and Sandri, Orana and Thomas, Ian and Wong, Peter and Chester, Andrea and McLaughlin, Patricia}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117929}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117929} -} - -@article{holdsworthInvestigatingUndergraduateStudent2021, - title = {Investigating Undergraduate Student Learning Experiences Using the Good Practice Learning and Teaching for Sustainability Education ({{GPLTSE}}) Framework}, - author = {Holdsworth, Sarah and Sandri, Orana}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {311}, - pages = {127532}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127532}, - urldate = {2021-06-08} -} - -@article{Hole2019, - title = {Recycling as the Way to Greener Production: {{A}} Mini Review}, - author = {Hole, Glenn and Hole, Anastasia S.}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {910--915}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.080}, - file = {/Users/fabio/Zotero/storage/L2TJZNYD/Recycling as the way to greener production A mini review.pdf} -} - -@inproceedings{Holland2010, - title = {Open {{Design}} and the {{RepRap Project}}}, - booktitle = {27th {{International Manufacturing Conference}}}, - author = {Holland, D, O'Donnell, G., Bennett, G.}, - year = {2010}, - pages = {97--106}, - address = {{Galway, Ireland}}, - abstract = {This paper details the investigation of an emerging trend within technology development: open design. Improvements in communications and computing technology have made collaboration over geographically vast distances possible. This technology has already had a major impact on the field of engineering, from the development of CAD/CAE/CAM practices to the emergence of concurrent engineering. Taking the lead from open source software, open design is an approach to technology development in which technical design information is licensed in such a manner that it can be accessed, utilised, modified and redistributed by anyone. The potential implications of this concept can be inferred from the impact of open source software. A review of the existing literature on the subject was conducted. A practical demonstration of the process was undertaken, via an attempt to contribute to an existing open design technology: the RepRap. This is a low cost rapid prototyper capable of manufacturing the parts required to make a copy of itself. The ability to use resin as a construction material was identified as a requirement of the device. An approach to integrating resin extrusion within the device was selected, a suitable material identified, and an experimental rig designed and assembled. Initial test results indicated that resin extrusion is viable for the RepRap.}, - keywords = {engineering design,open design,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/PYNFR5TN/Holland, D, O'Donnell, G., Bennett - 2010 - Open Design and the RepRap Project.pdf} -} - -@article{holmbergKeepPlasticsTight2023, - title = {Keep Plastics on a Tight Leash: {{Swedish}} Public Opinion on Plastic Policies}, - shorttitle = {Keep Plastics on a Tight Leash}, - author = {Holmberg, Karl and Persson, Sara}, - year = {2023}, - month = mar, - journal = {Environmental Science \& Policy}, - volume = {141}, - pages = {109--116}, - issn = {14629011}, - doi = {10.1016/j.envsci.2023.01.005}, - urldate = {2023-02-12}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/WR7KRGQI/Holmberg_Persson_2023_Keep plastics on a tight leash.pdf} -} - -@article{Holmstrom2016, - title = {The Direct Digital Manufacturing (r)Evolution: Definition of a Research Agenda}, - author = {Holmstr{\"o}m, Jan and Holweg, Matthias and Khajavi, Siavash H. and Partanen, Jouni}, - year = {2016}, - month = jun, - journal = {Operations Management Research}, - volume = {9}, - number = {1-2}, - pages = {1--10}, - issn = {1936-9735}, - doi = {10.1007/s12063-016-0106-z}, - abstract = {Direct digital manufacturing, or `3D printing' as it is more commonly known, offers a wealth of opportunities for product and process innovation, and is often touted to `revolutionize' today's manufacturing operations and its associated supply chains structures. Despite a growing number of successful 3D printing applications, however, evidence of any displacement of traditional manufacturing is limited. In this paper we seek to separate hype surrounding DDM from economic reality in order to ground the future research agenda for the Operations Management field. By opposing direct digital manufacturing with traditional tool-based manufacturing, we show that direct digital manufacturing so far lags behind by several orders of magnitude compared to traditional manufacturing methods. Yet we also find that direct digital manufacturing clearly is on an improvement trajectory that eventually will see it being able to compete with traditional manufacturing on a unit cost basis. As such we conclude that direct digital manufacturing will increasingly challenge operations management researchers to question established practices such as scheduling, batch sizing and inventory management in low-volume, high-variety contexts. Furthermore, an increasing adoption of direct digital manufacturing will drive structural shifts in the supply chain that are not yet well understood. We summarize these challenges by defining the research agenda at factory, supply chain, and operations strategy level.}, - isbn = {1936-9735}, - keywords = {3D printing,Additive manufacturing,Direct digital manufacturing,Process innovation,Supply chain structure}, - file = {/Users/fabio/Zotero/storage/Y999PMVX/The direct digital manufacturing (r)evolution definition of a research agenda.pdf} -} - -@article{holzerMindGapSystematic2021, - title = {Mind the Gap: {{Towards}} a Systematic Circular Economy Encouragement of Small and Medium-Sized Companies}, - author = {Holzer, Daniel and Rauter, Romana and Flei{\ss}, Eva and Stern, Tobias}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {298}, - pages = {126696}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126696}, - urldate = {2021-04-29}, - abstract = {Despite a growing number of circular economy (CE) strategies, reports, methods and tools, researchers have provided little empirical evidence on the corporate practices in small and medium-sized enterprises (SMEs) that are crucial to affect the transition towards a CE. Although there is an increase of studies on barriers for and driver to CE, there is little knowledge about what represents CE for SMEs and which topical areas are of central interest especially for SMEs. Based on CE related literature, we identified sustainability, resource efficiency, differentiation, cooperation with stakeholders, independence from resource supply and life cycle knowledge as such topical areas. Drawing on empirical survey data gathered from a cross-sectional sample of N = 183 SMEs in Austria, we first applied an Importance-Performance Analysis (IPA) to identify gaps between the perceived performance and importance ratings, reported by SME representatives, in those topical areas. The identified gaps give a direction which topical areas offer opportunities for further improving a company's performance. The findings reveal that the efficient use of resources as well as the procurement of resources plays a major role for Austrian SMEs. Cooperation with stakeholders, however, seems to be an underestimated topical area in the present sample. Based on the results of this IPA, we carried out a cluster analysis to identify groups of SMEs that vary according their overall perceived performance in and importance of the topical areas of CE. The result reveals four strategic groups of SMEs, namely CE frontrunners, fast followers, a late majority and laggards, which provide a basis for policy makers, intermediaries or cluster representatives to effectively address diverse SMEs as specific target groups by addressing topical areas of CE in order to facilitate a shift towards CE.}, - keywords = {Circular economy,Resource efficiency,SME,Survey,Transition}, - file = {/Users/fabio/Zotero/storage/FVKSP2RI/full-text.pdf} -} - -@article{Holzmann2020, - title = {Business Model Design for Novel Technologies in Nascent Industries: {{An}} Investigation of {{3D}} Printing Service Providers}, - author = {Holzmann, Patrick and Breitenecker, Robert J. and Schwarz, Erich J. and Gregori, Patrick}, - year = {2020}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {159}, - pages = {120193}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120193}, - urldate = {2020-07-14}, - abstract = {3D printing services are theorized to facilitate the transformative capacity of novel 3D printing technology. However, research lacks a precise understanding of how firms conduct business in this nascent industry. This paper examines the business model designs of 3D printing service providers by applying an original mixed-methods approach of qualitative content analysis and cluster analysis. We extract and compare the narratives that 141 service providers use to describe their businesses to discover latent business model design patterns. Results indicate that there are five distinct patterns, namely ``the digital market place model'', ``the single-tech specialist model'', ``the local service center model'', ``the multi-tech champion model'', and ``the allrounder model''. These patterns are fundamentally intertwined with specific 3D printing processes and digital technologies. Results also reveal that firms currently utilize key advantages of 3D printing such as sustainability aspects insufficiently in their business models. By disentangling the business model designs, our research extends prior knowledge and contributes to a more precise understanding of the value propositions, value creation, and value capture. Further, we add to a more elaborated and accurate understanding of the interplay between business model design and novel technology in nascent industries.}, - keywords = {3D printing,Additive manufacturing,Business model,Nascent industry,Novel technology,Service provider}, - file = {/Users/fabio/Zotero/storage/MCXMSNHB/full-text.pdf} -} - -@article{homrichCircularEconomyUmbrella2018, - title = {The Circular Economy Umbrella: {{Trends}} and Gaps on Integrating Pathways}, - author = {Homrich, Aline Sacchi and Galv{\~a}o, Graziela and Abadia, Lorena Gamboa and Carvalho, Marly M.}, - year = {2018}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {175}, - pages = {525--543}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.11.064}, - urldate = {2022-03-13}, - abstract = {Among scholars, politicians and practitioners, the term ``circular economy'' (CE) has become increasingly familiar, but the concept comes from different epistemological fields and there is still a lack of consensus and convergence in the literature. This paper investigates the trends and gaps on the pathways convergence of the circular economy literature. The research method is a combination of semantic analysis, bibliometrics, networks and content analysis in a systematic literature review. The sample is composed of 327 articles extracted from the Web of Science and Scopus database. The results point out the lack of consensus on terminologies and definitions, thus, based on semantic analysis, a definition is proposed. In addition, the literature shows two main clusters, with different backgrounds, of different leading research groups in distinctive geographic regions. One cluster focuses on ecoparks and industrial symbiosis, mostly in the context of China. The second cluster is concerned with supply chains, material closed loops and business models.}, - keywords = {Bibliometric study,Circular economy,Factor analysis,Publications,Qualitative content analysis,Research,Semantic analysis,Social networks} -} - -@article{Hond2000, - title = {Industrial Ecology: A Review}, - author = {den Hond, F.}, - year = {2000}, - month = jul, - journal = {Regional Environmental Change}, - volume = {1}, - number = {2}, - pages = {60--69}, - publisher = {{Springer Science and Business Media LLC}}, - issn = {1436-3798}, - doi = {10.1007/pl00011534}, - urldate = {2020-05-24}, - abstract = {Industrial ecology is both a vision, a research field, and a source of inspiration for practical work. Its proponents aim to contribute to sustainable development by closing materials cycles and realising a fundamental paradigm shift in the thinking concerning industry\textendash ecology relations. Dominant research lines in industrial ecology focus on industrial metabolism and life cycle tools. The underlying assumption is that the flow and transformation of materials can be managed through the correcting of market and regulatory failures which are causes of environmental degradation. This literature review suggests, on the one hand, that the manageability of the flow of materials is currently limited by market and regulatory failures which inhibit the implementation of the principles of industrial ecology and, on the other hand, that the flow and transformation of materials are only partly affected by prices, information and laws.}, - keywords = {Climate Change,Climate Change/Climate Change Impacts,general,Geography,Nature Conservation,Oceanography,Regional/Spatial Science} -} - -@article{Honeck2021, - title = {Integrating Ecosystem Services into Policymaking \textendash{} {{A}} Case Study on the Use of Boundary Organizations}, - author = {Honeck, Erica and Gallagher, Louise and {von Arx}, Bertrand and Lehmann, Anthony and Wyler, Nicolas and Villarrubia, Olga and Guinaudeau, Benjamin and Schlaepfer, Martin A.}, - year = {2021}, - month = jun, - journal = {Ecosystem Services}, - volume = {49}, - pages = {101286}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101286}, - urldate = {2021-04-29}, - abstract = {Boundary organizations are non-traditional structures that can foster transdisciplinary relationships and help catalyze the exchange of ideas, trust, and ultimately the implementation of scientific evidence into policy. Here, we describe GE-21, a group composed of researchers and public servants interested in promoting biodiversity and ecosystem services in Geneva, Switzerland, as an example of such a structure. GE-21 developed into a de facto social experiment for fostering inter- and transdisciplinary science and promoting nature-based policies. The results of two ecosystem-based projects carried by GE-21 were rapidly adopted into policy. Here, we provide a post-hoc narrative based on reports, interviews, and observations that collectively assess the merits and drawbacks of such structures for mainstreaming ecosystem services. We contend that the following five characteristics of this boundary organization may have facilitated its role as a conduit between academic research and public agencies: 1) projects proposing timely, relevant, and novel solutions to policy needs; 2) institutional support for applied interdisciplinary research; 3) a `safe space' to express ideas and develop close relationships over time; 4) availability of high-quality spatial data at a relevant scale, and scientific capacity to treat them; 5) resources dedicated to communication.}, - keywords = {Boundary organization,Inter-institution,Nature conservation,Science-policy collaboration,Transdisciplinary research}, - file = {/Users/fabio/Zotero/storage/PFH4YHHN/full-text.pdf} -} - -@article{hong5axisMultimaterial3D2023, - title = {5-Axis Multi-Material {{3D}} Printing of Curved Electrical Traces}, - author = {Hong, Freddie and Lampret, Borut and Myant, Connor and Hodges, Steve and Boyle, David}, - year = {2023}, - month = may, - journal = {Additive Manufacturing}, - volume = {70}, - pages = {103546}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2023.103546}, - urldate = {2023-05-10}, - abstract = {Prototyping three-dimensional (3D) printed electronics via material extrusion (MEX) has become popular in recent years with the increased availability of commercial conductive filaments. However, the current planar 3D printing method of layer upon layer construction shows clear challenges in extruding conductive traces for inclining surfaces. This inherent limitation of planar 3D printing restricts the design freedom of 3D printed electrically conductive objects with conductive filaments based on Polylactic Acid (PLA). To overcome this limitation of planar 3D printing, this paper describes a novel method of employing a multi-material 5-axis 3D printer to extrude conductive PLA in curved layers. The paper characterises changes in the resistivity of printed traces for angles of incline and curvatures using two commercial conductive PLA filaments. Conductive traces were printed via a custom-built desktop 5-axis 3D printer and a conventional multi-material MEX 3D printer. We found that 3D printing following a conformal approach can reduce the resistivity of the vertical conductive trace by more than 9 times. The paper concludes by successfully fabricating complex conductive patterns onto free-form doubly curved substrates.}, - langid = {english}, - keywords = {3D printed electronics,5-axis 3D printing,Conductive filament,Rapid prototyping}, - file = {/Users/fabio/Zotero/storage/VQTESBR3/Hong et al. - 2023 - 5-axis multi-material 3D printing of curved electr.pdf;/Users/fabio/Zotero/storage/PDCZ3JR9/S2214860423001598.html} -} - -@article{hongInsituObservationExtrusion2022, - title = {In-Situ Observation of the Extrusion Processes of {{Acrylonitrile Butadiene Styrene}} and {{Polylactic Acid}} for Material Extrusion Additive Manufacturing}, - author = {Hong, Ye and Mrinal, Manjarik and Phan, Huy Si and Tran, Vinh Dung and Liu, Xinchuan and Luo, Cheng}, - year = {2022}, - month = jan, - journal = {Additive Manufacturing}, - volume = {49}, - pages = {102507}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102507}, - urldate = {2021-12-10} -} - -@article{Honti2019, - title = {Review and Structural Analysis of System Dynamics Models in Sustainability Science}, - author = {Honti, Gergely and D{\"o}rg{\H o}, Gyula and Abonyi, J{\'a}nos}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {240}, - pages = {118015}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118015} -} - -@article{hoodaInsightsDegradationHighdensity2023, - title = {Insights into the Degradation of High-Density Polyethylene Microplastics Using Microbial Strains: {{Effect}} of Process Parameters, Degradation Kinetics and Modeling}, - shorttitle = {Insights into the Degradation of High-Density Polyethylene Microplastics Using Microbial Strains}, - author = {Hooda, Sanjeevani and {Annu} and Mondal, Prasenjit}, - year = {2023}, - month = jun, - journal = {Waste Management}, - volume = {164}, - pages = {143--153}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.04.002}, - urldate = {2023-05-10}, - abstract = {The extensive distribution of microplastics and their abundance around the world has raised a global concern because of the lack of proper disposal channels as well as poor knowledge of their implications on human health. Sustainable remediation techniques are required owing to the absence of proper disposal methods. The present study explores the deterioration process of high-density polyethylene (HDPE) microplastics using various microbes along with the kinetics and modeling of the process using multiple non-linear regression models. Ten different microbial strains were used for the degradation of microplastics for a period of 30 days. Effect of process parameters on the degradation process was studied with the selected five microbial strains that presented the best degradation results. The reproducibility and efficacy of the process were tested for an extended period of 90 days. Fourier-transform infrared spectroscopy (FTIR) and field emission-scanning electron microscopy (FE-SEM) were used for the analysis of microplastics. Polymer reduction and half-life were evaluated. Pseudomonas putida achieved the maximum degradation efficiency of 12.07\% followed by Rhodococcus ruber (11.36\%), Pseudomonas stutzeri (8.28\%), Bacillus cereus (8.26\%), and Brevibacillus borstelensis (8.02\%) after 90 days. Out of 14 models tested, 5 were found capable of modeling the process kinetics and based on simplicity and statistical data, Modified Michaelis-Menten model (F8; R2 = 0.97) was selected as superior to others. This study successfully establishes the potential of bioremediation of microplastics as the viable process.}, - langid = {english}, - keywords = {Biodegradation process,Kinetic study,Microbial remediation,Microplastics,Non-linear regression models}, - file = {/Users/fabio/Zotero/storage/PVJVGNTT/Hooda et al. - 2023 - Insights into the degradation of high-density poly.pdf;/Users/fabio/Zotero/storage/9IVJTG5J/S0956053X23002787.html} -} - -@article{hooftmanReducingUncertaintyEcosystem2022, - title = {Reducing Uncertainty in Ecosystem Service Modelling through Weighted Ensembles}, - author = {Hooftman, Danny A.P. and Bullock, James M. and Jones, Laurence and Eigenbrod, Felix and Barredo, Jos{\'e} I. and Forrest, Matthew and Kindermann, Georg and Thomas, Amy and Willcock, Simon}, - year = {2022}, - month = feb, - journal = {Ecosystem Services}, - volume = {53}, - pages = {101398}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2021.101398}, - urldate = {2022-01-17} -} - -@article{Hopewell2009, - title = {Plastics Recycling: Challenges and Opportunities}, - author = {Hopewell, Jefferson and Dvorak, Robert and Kosior, Edward}, - year = {2009}, - month = jul, - journal = {Philosophical Transactions of the Royal Society B: Biological Sciences}, - volume = {364}, - number = {1526}, - pages = {2115--2126}, - issn = {0962-8436}, - doi = {10.1098/rstb.2008.0311}, - abstract = {Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3-4\% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it may be possible to divert the majority of plastic waste from landfills to recycling over the next decades.}, - isbn = {09628436}, - pmid = {19528059}, - keywords = {chemical recycling,energy recovery,environmental impacts,plastic packaging,plastics recycling,waste management}, - file = {/Users/fabio/Zotero/storage/E2AM993B/Plastics recycling challenges and opportunities.pdf} -} - -@article{hopkinsAdditiveManufacturingTube2020, - title = {Additive Manufacturing via Tube Extrusion ({{AMTEx}})}, - author = {Hopkins, Nicholas and {van Vuuren}, Ruben Janse and Brooks, Hadley}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101606}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101606}, - urldate = {2020-10-05} -} - -@article{Hopkinson2020, - title = {Systemic Building Blocks for Creating and Capturing Value from Circular Economy}, - author = {Hopkinson, Peter and De Angelis, Roberta and Zils, Marcus}, - year = {2020}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {155}, - pages = {104672}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104672} -} - -@article{Hoppe2016, - title = {Identification and Quantification of Oligomers as Potential Migrants in Plastics Food Contact Materials with a Focus in Polycondensates \textendash{} {{A}} Review}, - author = {Hoppe, M. and {de Voogt}, P. and Franz, R.}, - year = {2016}, - month = apr, - journal = {Trends in Food Science \& Technology}, - volume = {50}, - pages = {118--130}, - publisher = {{Elsevier Ltd}}, - issn = {09242244}, - doi = {10.1016/j.tifs.2016.01.018}, - abstract = {Background: Over the last years the variety of food and beverage packaging has increased with the development of new plastic materials and (co)polymer modifications. Oligomers which are always present in polymers evoke attention as potential migrants, from a qualitatively and quantitatively viewpoint. Scope and approach: This article deals with oligomers as potential migrants from plastics food contact materials and reviews their occurrence as well as analytical methods for their identification and quantification. Additionally a section about migration summarizes literature providing oligomer levels in food simulants and foods. Special attention was given to polycondensates since these represent a rapidly expanding polymer field due to increased numbers of (co)-monomers authorized by the EU. Key findings and conclusions: Evaluating a polymer regarding the content and migration potential of its oligomers several factors like the separation of oligomers from the material, the choice of suitable separation and detection techniques for identification and quantification and the choice of an appropriate standard have to be considered. Generally, MS technologies coupled to liquid chromatography have been shown to represent the analytical approach of choice. This is, so far as the authors are aware of, the first review exclusively focusing on analytical methods for oligomers as polymer specific substances, which suggests to consider them as a separate polymer related and polymer type specific group besides the so-called non-intentionally added substances (NIAS).}, - keywords = {Food contact polymer,Mass spectrometry,Migration,Oligomer,Polycondensates}, - file = {/Users/fabio/Zotero/storage/G4XP8Z82/Food contact and oligomer contamination.pdf} -} - -@article{Hoppmann2020, - title = {Why Matter Matters: {{How}} Technology Characteristics Shape the Strategic Framing of Technologies}, - author = {Hoppmann, Joern and Anadon, Laura Diaz and Narayanamurti, Venkatesh}, - year = {2020}, - month = feb, - journal = {Research Policy}, - volume = {49}, - number = {1}, - pages = {103882}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103882} -} - -@article{horaniIdentificationTargetCustomers2020, - title = {Identification of Target Customers for Sustainable Design}, - author = {Horani, Lara F.}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {274}, - pages = {123102}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123102}, - urldate = {2020-08-09}, - abstract = {The first step for any company when it starts producing a new product is to identify its target customers and to understand and satisfy their actual needs. Recently, customers have been taking into consideration the societal, economic and environmental issues when examining a product. To keep up with these important issues, this research focuses on identifying the eco-friendly customers for sustainable design, profiling the target customers, and making it clear who the eco-friendly customers are and what characteristics they share. This was achieved by employing survey questionnaires and interviews, investigating not only environmental requirements but also sustainable ones (environmental, social and economic). The data was analyzed by using the Process macro and two-way interaction effect method. The research resulted in developing and adjusting the analysis method for identifying eco-friendly customers for sustainable design, as opposed to only identifying eco-friendly customers. This research enables companies to effectively target eco-friendly consumer markets by the utilization of segmentation analysis for promoting companies' marketing strategies. The findings of this study show that eco-friendly customers are most likely people with higher educational levels and higher income. Moreover, the study proposes that additional research should be done exploring effective ways to increase students' knowledge and awareness about environmental issues.}, - keywords = {Eco-friendly customer,Sustainable consumer behavior,Sustainable design,Sustainable requirements} -} - -@article{Horowitz2018, - title = {Life Cycle Assessment of Bottled Water: {{A}} Case Study of {{Green2O}} Products}, - author = {Horowitz, Naomi and Frago, Jessica and Mu, Dongyan}, - year = {2018}, - month = jun, - journal = {Waste Management}, - volume = {76}, - pages = {734--743}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2018.02.043}, - file = {/Users/fabio/Zotero/storage/6GPTWXRV/Life cycle assessment of bottled water- A case study of Green2O products.pdf} -} - -@article{Horta2017, - title = {Large Scale Additive Manufacturing of Eco-Composites}, - author = {Horta, J. F. and Sim{\~o}es, F. J. P. and Mateus, A.}, - year = {2018}, - month = may, - journal = {International Journal of Material Forming}, - volume = {11}, - number = {3}, - pages = {375--380}, - publisher = {{International Journal of Material Forming}}, - issn = {1960-6206}, - doi = {10.1007/s12289-017-1364-5}, - abstract = {The evolution of additive manufacturing processes is enabling the production of parts with improved dimensional accuracy, mechanical, physical and chemical properties [1]. New materials also contribute to this trend, and in this scope, eco-composites, materials with environmental and ecological advantages, which include natural polymers, have been acquiring increased relevance [2]. The purpose of this study is to develop composite material parts manufactured from recycled thermoplastics and natural fibres, in this case, wood residues. Additive manufacturing (fused deposition modelling) will be accomplished using a robot combined with extrusion unit. The objective is to access the influence of the main manufacturing parameters, such as temperature, distance between layers or deposition speed, on the final part characteristics, especially dimensional accuracy. Reverse engineering and several material analysis techniques will be employed to achieve this goal.}, - keywords = {Additive manufacturing,HDPE,Large-Scale,Sawdust}, - file = {/Users/fabio/Zotero/storage/X6N5IFRS/large scale additive manufacturing of eco-composites.pdf} -} - -@article{HortaArduin2020, - title = {Novel Indicators to Better Monitor the Collection and Recovery of (Critical) Raw Materials in {{WEEE}}: {{Focus}} on Screens}, - author = {Horta Arduin, Rachel and Mathieux, Fabrice and Huisman, Jaco and Blengini, Gian Andrea and Charbuillet, Carole and Wagner, Michelle and Bald{\'e}, Cornelis Peter and Perry, Nicolas}, - year = {2020}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {157}, - pages = {104772}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104772} -} - -@article{Horvath2018, - title = {Designing {{Business Solutions}} for {{Plastic Waste Management}} to {{Enhance Circular Transitions}} in {{Kenya}}}, - author = {Horvath, Balint and Mallinguh, Edmund and Fogarassy, Csaba}, - year = {2018}, - month = may, - journal = {Sustainability}, - volume = {10}, - number = {5}, - pages = {1664}, - issn = {2071-1050}, - doi = {10.3390/su10051664}, - file = {/Users/fabio/Zotero/storage/S7V8V42F/Designing Business Solutions for Plastic Waste Management to Enhance Circular Transitions in Kenya.pdf} -} - -@article{Hossain2019, - title = {A Systematic Review of Living Lab Literature}, - author = {Hossain, Mokter and Leminen, Seppo and Westerlund, Mika}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {213}, - pages = {976--988}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.257}, - abstract = {A living lab is a physical or virtual space in which to solve societal challenges, especially for urban areas, by bringing together various stakeholders for collaboration and collective ideation. Although the notion has received increasing attention from scholars, practitioners and policy makers, its essence remains unclear to many. We therefore performed a systematic literature review of a sample of 114 scholarly articles about living labs to understand the central facets discussed in the nascent literature. In particular, we explored the origin of the living lab concept and its key paradigms and characteristics, including stakeholder roles, contexts, challenges, main outcomes, and sustainability. While doing this, we discovered that the number of publications about living labs has increased significantly since 2015, and several journals are very active in publishing articles on the topic. The living lab is considered a multidisciplinary phenomenon and it encompasses various research domains despite typically being discussed under open and user innovation paradigms. What is more, the existing literature views living labs simultaneously as landscapes, real-life environments, and methodologies, and it suggests that they include heterogeneous stakeholders and apply various business models, methods, tools and approaches. Finally, living labs face some challenges, such as temporality, governance, efficiency, user recruitment, sustainability, scalability and unpredictable outcomes. In contrast, the benefits include tangible and intangible innovation and a broader diversity of innovation. Based on our analysis, we provide some implications and suggestions for future research.}, - keywords = {Challenges,Characteristics,Literature review,Living labs,Open innovation,Sustainability}, - file = {/Users/fabio/Zotero/storage/VKGJS5W3/A systematic review of living lab literature.pdf} -} - -@article{Hossain2020, - title = {Frugal Innovation: {{Conception}}, Development, Diffusion, and Outcome}, - author = {Hossain, Mokter}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {262}, - pages = {121456}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121456}, - urldate = {2020-05-08}, - abstract = {Frugal innovation (FI) demonstrates a new entrepreneurial landscape where small firms with limited resources develop innovations for underserved customers in low-income countries. FIs also create new markets and contribute to sustainability. The studies so far have highlighted various frugal products introduced by large and small firms around the world. This study aims to explore the process of how individuals at the grassroots level successfully conceptualize, develop, and diffuse their FIs to achieve commercial success. It analyzes the antecedents, processes, and consequences of FI development and commercialization, and explores how FIs evolve and diffuse in emerging markets. It also seeks to identify what triggers and motivates individuals to engage in FI. The study points out the initiative that individuals take and the challenges they face, from inception to the successful commercialization of their innovations. We therefore portray an overall understanding of the antecedents, processes, and consequences for these entrepreneurs. Along with the scholars, the findings of this study will be insightful for practitioners who are interested in the frugal innovation phenomenon. It points out issues, such as the dual-business model, innovation to serve low-income customers, and diffusion patterns that managers need to understand when shaping their business strategies, for emerging markets in particular and the world in general.}, - keywords = {Diffusion of innovation,Emerging markets,Frugal innovation,Innovation process,Sustainability} -} - -@article{Hossain2020a, - title = {Additive {{Manufacturing}} and the {{COVID-19}} Challenges : {{An}} in-Depth Study {{Additive Manufacturing}} and the {{COVID-19}} Challenges : {{An}} in-Depth Study}, - author = {Hossain, Mokarram}, - year = {2020}, - number = {August}, - doi = {10.13140/RG.2.2.35767.55206}, - file = {/Users/fabio/Zotero/storage/EVKFCNEU/Additive Manufacturing and the COVID-19 challenges An in-depth study.pdf} -} - -@article{hossainFrugalInnovationSustainable2021, - title = {Frugal Innovation and Sustainable Business Models}, - author = {Hossain, Mokter}, - year = {2021}, - month = feb, - journal = {Technology in Society}, - volume = {64}, - pages = {101508}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101508}, - urldate = {2021-01-12}, - abstract = {This study aims to explore how frugal innovations (FIs) emerge at the grassroots level of developing countries and employ novel business models to contribute to sustainable development. It explores various business model elements, mainly viewed through the lens of value proposition, value creation, and value capture. FIs transform underserved customers at the grassroots level into novel consumer groups. By exploring three FI cases, this study contributes to the literature about FI business models. It shows how individuals with limited education, funds, and resources can bring affordable products to market using outside the box thinking to meet the needs of underserved customers in developing countries.}, - keywords = {Business model,Developing countries,Frugal innovation,Grassroots innovation,Sustainability}, - file = {/Users/fabio/Zotero/storage/5EDAA8TT/full-text.pdf} -} - -@article{hossainFrugalInnovationSustainable2023, - title = {Frugal Innovation for Sustainable Rural Development}, - author = {Hossain, Mokter and Park, Sukyung and Shahid, Subhan}, - year = {2023}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {193}, - pages = {122662}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122662}, - urldate = {2023-07-06}, - abstract = {Sustainable development (SD) is a key concern for businesses, governments, and policymakers, with a particular emphasis on rural areas for achieving the sustainable development goals (SDGs). Frugal innovation offers a new and promising approach for sustainable rural development, but its specific contributions in this context remain underexplored in the existing literature. This study, therefore, aims to address this gap by examining how frugal innovation can contribute to sustainable development in rural areas. Using a grounded theory method and based on 22 interviews with key informants related to 13 cases of frugal enterprise in South Asia, this qualitative study attempts to accomplish the aim of the study. We developed a classification that identifies the increasing positive and decreasing negative parameters of SDGs to assess the extent to which frugal enterprises contribute to specific SDGs. Our findings show that frugal innovations tend to contribute more to SDGs than conventional products. However, certain SDGs have limited potential for frugal or other types of innovation to make significant contributions, as these goals are mainly intended to be assessed at the national level. Based on our findings, we discuss the implications and suggest future research avenues.}, - langid = {english}, - keywords = {Frugal entrepreneurship,Frugal innovation,Rural development,Sustainable development goal}, - file = {/Users/fabio/Zotero/storage/8A6GTC6M/Hossain et al. - 2023 - Frugal innovation for sustainable rural developmen.pdf;/Users/fabio/Zotero/storage/87FX5T7G/S0040162523003475.html} -} - -@article{hossainFrugalInnovationUnveiling2021, - ids = {hossain2021b,hossain2021c}, - title = {Frugal Innovation: {{Unveiling}} the Uncomfortable Reality}, - author = {Hossain, Mokter}, - year = {2021}, - month = nov, - journal = {Technology in Society}, - volume = {67}, - pages = {101759}, - publisher = {{Pergamon}}, - issn = {0160-791X}, - doi = {10.1016/J.TECHSOC.2021.101759}, - urldate = {2021-09-20}, - keywords = {Affordable products,Frugal innovation,Low-income customers,Uncomfortable reality}, - file = {/Users/fabio/Zotero/storage/G4Q3Y9YF/Hossain - 2021 - Frugal innovation Unveiling the uncomfortable rea.pdf;/Users/fabio/Zotero/storage/5GQ7C7LR/S0160791X21002347.html} -} - -@article{hossainFullCircleChallenges2022, - title = {Full Circle: {{Challenges}} and Prospects for Plastic Waste Management in {{Australia}} to Achieve Circular Economy}, - shorttitle = {Full Circle}, - author = {Hossain, Rumana and Islam, Md Tasbirul and Ghose, Anirban and Sahajwalla, Veena}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {368}, - pages = {133127}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133127}, - urldate = {2022-08-05}, - abstract = {Plastic manufacturing accounts for 6\% of global oil consumption and is one of the world's fastest-growing waste streams. As the global supply of fossil fuels becomes critical, it is important to quantify how virgin plastic made from fossil fuel sources is recovered, reused, and remanufactured. In this study, the authors undertook the first systematic literature review of Australia's plastic waste (PW) management system to assess challenges and opportunities in moving towards a circular economy. Sources included government reports, industry survey reports, academic research articles, and national household and waste data. Results of the study showed that despite the sharp exponential growth in consumption of plastics (3.5 million tonnes (Mt) in 2018\textendash 19), Australia's national recovery rate is only 11.5\%, which leaves substantial room for improvement. From 2007 to 2019, average PW generation was just over 2.6~Mt and in 2019, the generation was close to 2.55~Mt. In terms of polymer types, high-density polyethylene (HDPE) generated the most, followed by polyethylene terephthalate (PET) and low-density polyethylene (LDPE). Close to half (47\%) the volume of plastic waste is generated by households (specifically, PET and HDPE). Market growth was of biodegradable plastics is much slower than expected. Most recycling facilities use mechanical recycling as the main processing technology, and more facilities are required to process PET (especially in NSW and Victoria). The construction (built environment) sector consumes the largest quantity of recycled plastics; however, local recycled material use was only 10\% in all the Australian sectors. Plastic waste is also used for energy recovery, with polyethylene (PE), polypropylene (PP) and polystyrene (PS). This study also discusses the benefits of implementing state-of-the-art processing facilities using diversified recycling technology; vertical integration of plastic manufacturers and pre-processors; regulatory and structural reform; and development of local manufacturing industries using recycled plastics. It is incompetent to efficiently resolve the Australian plastic waste problem with simply bans, it is a global cross-sectoral issue that calls for cross-departmental cooperation. The future of plastic waste management not only relies on the effectiveness of local government and recyclers, but also on community involvement, and initiatives on national, regional, and global level. Numerous stakeholders including industry insiders, governments, customs agencies, regulators, intergovernmental organizations, non-governmental organizations, and civil society need to be involved.}, - langid = {english}, - keywords = {Australia,Energy recovery,HDPE,Households,Mechanical recycling,PET}, - file = {/Users/fabio/Zotero/storage/MJE5HNBS/Hossain et al_2022_Full circle.pdf;/Users/fabio/Zotero/storage/68KDDVFY/S0959652622027160.html} -} - -@article{houPublicAttitudesOpen2022, - title = {Public Attitudes on Open Source Communities in {{China}}: {{A}} Text Mining Analysis}, - shorttitle = {Public Attitudes on Open Source Communities in {{China}}}, - author = {Hou, Shengjie and Zhang, Xiang and Yi, Biyi and Tang, Yi}, - year = {2022}, - month = nov, - journal = {Technology in Society}, - volume = {71}, - pages = {102112}, - issn = {0160-791X}, - doi = {10.1016/j.techsoc.2022.102112}, - urldate = {2022-09-18}, - abstract = {The Development of open source community has been a major concern in many countries. Sustainable public engagement is one of the essential conditions for establishing an open source community. Social media offers a new channel for understanding public opinions on OSCs. This paper conducts a content analysis focusing on social media data regarding the OSCs in China. Topic clustering, sentiment classification, and social network analysis are used to analyze the text data. Results show that most people on social media support the development of OSCs in China, but there are still some objections that believe open source will reduce the innovation ability of China. Based on the findings, we suggest that the government should fully understand public attitudes on OSCs and respond in time to the public by using social media. More high-quality China's independent OSCs should be built to enable Chinese local open source contributors to survive and communicate with each other. In addition, we suggest that a comprehensive and reasonable evaluation and incentive system and more effective copyright protection measures should be created. Overall, this paper contributes to the field of development of OSCs from the perspective of users.}, - langid = {english}, - keywords = {Open source community,Public engagement,Social media,Social network analysis,Text mining}, - file = {/Users/fabio/Zotero/storage/DKDEP2HY/S0160791X22002536.html} -} - -@article{howarthIntegratingAdaptationPractice2022, - title = {Integrating Adaptation Practice in Assessments of Climate Change Science: {{The}} Case of {{IPCC Working Group II}} Reports}, - author = {Howarth, Candice and Viner, David}, - year = {2022}, - month = sep, - journal = {Environmental Science \& Policy}, - volume = {135}, - pages = {1--5}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.04.009}, - urldate = {2022-05-23} -} - -@article{Howell1992, - title = {A Ten Year Review of Plastics Recycling}, - author = {Howell, S. Garry}, - year = {1992}, - journal = {Journal of Hazardous Materials}, - volume = {29}, - number = {2}, - pages = {143--164}, - issn = {03043894}, - doi = {10.1016/0304-3894(92)85066-A}, - abstract = {A short history of the practice of plastics recycling as practiced in the United States and Europe for the past ten years indicates that much progress has been made in educating the public sector about the environmental damage done by the indiscriminating disposal of plastic items and potential opportunities to recycle them. Recent legislation has made the collection of some discarded plastic articles more efficient, and has provided economic incentives to recover and reuse waste plastics. A discussion of the methods of collecting, separating, cleaning, and fabrication of plastic wastes into useful items leads to the conclusion that much work is yet to be done to develop more efficient ways to perform these tasks. In addition, improvements in blending the disparate plastic materials in wastes could lead to the production of better products made from recycled materials. The public must be made aware of the fact that consumer products made of recycled plastics are often as good as those made of virgin material. And that the resulting environmental benefits as well as energy savings are for the common good. ?? 1992.}, - file = {/Users/fabio/Zotero/storage/XXM3ZAZ8/A ten year review of plastics recycling.pdf} -} - -@article{Hoy2013, - title = {{{3D}} Printing: Making Things at the Library.}, - author = {Hoy, Matthew B}, - year = {2013}, - month = jan, - journal = {Medical reference services quarterly}, - volume = {32}, - number = {1}, - eprint = {23394423}, - eprinttype = {pubmed}, - pages = {94--9}, - issn = {1540-9597}, - doi = {10.1080/02763869.2013.749139}, - urldate = {2014-02-02}, - abstract = {3D printers are a new technology that creates physical objects from digital files. Uses for these printers include printing models, parts, and toys. 3D printers are also being developed for medical applications, including printed bone, skin, and even complete organs. Although medical printing lags behind other uses for 3D printing, it has the potential to radically change the practice of medicine over the next decade. Falling costs for hardware have made 3D printers an inexpensive technology that libraries can offer their patrons. Medical librarians will want to be familiar with this technology, as it is sure to have wide-reaching effects on the practice of medicine.}, - pmid = {23394423}, - keywords = {Humans,Libraries,Medical,Printing,Printing: economics,Printing: instrumentation}, - file = {/Users/fabio/Zotero/storage/5PHNDZNK/Hoy - 2013 - 3D printing making things at the library.pdf} -} - -@article{Hsu2020, - title = {Cost-Benefit Analysis for Recycling of Agricultural Wastes in {{Taiwan}}}, - author = {Hsu, Esher}, - year = {2020}, - month = feb, - journal = {Waste Management}, - volume = {120}, - pages = {424--432}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.09.051}, - urldate = {2021-01-01}, - abstract = {Agricultural waste can be recycled in different ways. Cost-effectiveness is important information for investment decision-making of enterprises and policy-making of government to choose a profitable way to recycle agricultural waste. Therefore, this paper aims to present a cost-benefit analysis to assess and compare the cost-effectiveness between feasible recycling methods, and further propose cost-effective ways for recycling agricultural waste in Taiwan. Three recycling types of agricultural wastes, namely, composting, biogas power generation and biomass fuel are selected for cost-benefit analysis based on related regulations and policy supports of agricultural waste management in Taiwan. Primary data collected by sampling surveys conducted in 2018 supplemented by secondary data from national statistics are used for this study. Study results show that all three recycling types of agricultural wastes discussed in this study are profitable under corresponding economic conditions in 2018 with benefit/cost ratio greater than 1 and positive net present value; as expected, the cost-effectiveness of agricultural waste recycling varies depending on the recycling types, composition of input materials, and economic scales. Mixing chicken manure with other agricultural wastes for composting and using rice straw to make biomass fuel rods are estimated to have higher cost-effectiveness; livestock farms with small farming scale have relatively low biogas energy recovery efficiency; the cost-effectiveness of biogas power generation highly depends on fixed-in tariffs (FITs). Results imply that policy support for establishing co-processing centers of agricultural waste and differentiated FITs would be good measures to stimulate recycling efficiency of agricultural waste in Taiwan.}, - keywords = {Agricultural waste,Biogas,Biomass fuel,Compost,Cost-benefit analysis,Recycling} -} - -@article{Hu2013, - title = {The Gift from Nature: {{Bio-inspired}} Strategy for Developing Innovative Bridges}, - author = {Hu, Nan and Feng, Peng and Dai, Gonglian}, - year = {2013}, - journal = {Journal of Bionic Engineering}, - volume = {10}, - number = {4}, - pages = {405--414}, - publisher = {{Jilin University}}, - issn = {16726529}, - doi = {10.1016/S1672-6529(13)60246-2}, - abstract = {Biology has been a brilliant teacher and a precious textbook to man-made construction for thousands of years, because it allows one to learn and be inspired by nature's remarkable and efficient structural systems. However, the emerging biomimetic studies have been of increasing interest for civil engineering design only in the past two decades. Bridge design is one of aspects on structural engineering of biomimetics that offers an enormous potential for inspiration in various aspects, such as the geometry, structure, mechanism, energy use and the intelligence. Recently built bridges and design proposals in which biological systems have produced a range of inspiration are reviewed in this paper. Multidisciplinary cooperation is discussed for the implementation of bio-inspired methods in future design. A case study about using bio-inspired strategy is trying to present a problem-solving approach, yet further cooperation is still needed to utilize biomimetic studies for design inspiration. This paper aims to call a close multidisciplinary collaboration that promotes engineers to build more sustainable and smart structural systems for bridges in the 21st century. \textcopyright{} 2013 Jilin University.}, - isbn = {1672-6529}, - keywords = {Bio-inspired method,Bionics,Bridges,Conceptual design,Form-finding,Sustainability}, - file = {/Users/fabio/Zotero/storage/GGP4KMZQ/the gift from nature- bio-inspired strategy for developing innovative bridges.pdf} -} - -@article{Hu2017, - title = {Preparation, Morphology and Superior Performances of Biobased Thermoplastic Elastomer by in Situ Dynamical Vulcanization for {{3D-printed}} Materials}, - author = {Hu, Xiaoran and Kang, Hailan and Li, Yan and Geng, Yiting and Wang, Runguo and Zhang, Liqun}, - year = {2017}, - month = jan, - journal = {Polymer}, - volume = {108}, - pages = {11--20}, - publisher = {{Elsevier Ltd}}, - issn = {00323861}, - doi = {10.1016/j.polymer.2016.11.045}, - abstract = {3D-printing of polymers provides the opportunity to fabricate materials into customized sizes and shapes. The present study describes fully renewable thermoplastic vulcanizates (TPVs) consisting of synthesized biobased elastomer (PLBSI) and poly (lactic acid) (PLA) by in situ dynamic vulcanization for 3D-printed materials. The morphology study implied in situ dynamic vulcanization and phase inversion occurs and leads the PLBSI elastomer dispersed as microparticles in PLA matrix. Then, the morphological evolution mechanism was proposed and indicated the dispersed PLBSI elastomer microparticles are actually agglomerates of elastomer nanoparticles. The PLBSI/PLA TPVs perform good processability and reprocessability by rheological and recyclability tests. Besides, good in vitro degradability and cytotoxicity suggests PLBSI/PLA TPVs are promising sustainable biomaterials. The superior strength and elasticity confirmed by the tensile tests of 3D-printed samples, and firm microstructure and the reliable printed accuracy of 3D-printed samples investigated by SEM implied the PLBSI/PLA TPVs were ideal 3D-printing materials.}, - isbn = {0032-3861}, - keywords = {3D-printing,Biobased,Dynamical vulcanization,Morphology}, - file = {/Users/fabio/Zotero/storage/JZJNZMX4/preparation, morphology and superior performances of biobased thermoplastic elastomer by in situ dynamical vulcanization for 3d-printed materials.pdf} -} - -@article{Hu2018, - title = {A Low-Cost, Printable, and Stretchable Strain Sensor Based on Highly Conductive Elastic Composites with Tunable Sensitivity for Human Motion Monitoring}, - author = {Hu, Yougen and Zhao, Tao and Zhu, Pengli and Zhang, Yuan and Liang, Xianwen and Sun, Rong and Wong, Ching-Ping}, - year = {2018}, - month = apr, - journal = {Nano Research}, - volume = {11}, - number = {4}, - pages = {1938--1955}, - issn = {1998-0124}, - doi = {10.1007/s12274-017-1811-0} -} - -@article{Huang2008, - title = {Sloping Wall Structure Support Generation for Fused Deposition Modeling}, - author = {Huang, Xiaomao and Ye, Chunsheng and Wu, Siyu and Guo, Kaibo and Mo, Jianhua}, - year = {2008}, - month = aug, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {42}, - number = {11-12}, - pages = {1074--1081}, - issn = {0268-3768}, - doi = {10.1007/s00170-008-1675-2}, - urldate = {2013-03-24}, - keywords = {fused deposition modeling,rapid prototype manufacturing,sloping wall structure,support}, - file = {/Users/fabio/Zotero/storage/ACC4VUXG/Sloping wall structure support generation for fused deposition modeling.pdf} -} - -@article{Huang2013, - title = {Additive Manufacturing and Its Societal Impact: {{A}} Literature Review}, - author = {Huang, Samuel H. and Liu, Peng and Mokasdar, Abhiram and Hou, Liang}, - year = {2013}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {67}, - number = {5-8}, - pages = {1191--1203}, - issn = {02683768}, - doi = {10.1007/s00170-012-4558-5}, - abstract = {Thirty years into its development, additive man- ufacturing has become a mainstream manufacturing process. Additive manufacturing build up parts by adding materials one layer at a time based on a computerized 3D solid model. It does not require the use of fixtures, cutting tools, coolants, and other auxiliary resources. It allows design optimization and the producing of customized parts on-demand. Its advantages over conventional manufacturing have captivat- ed the imagination of the public, reflected in recent main- stream publications that call additive manufacturing ``the third industrial revolution.'' This paper reviews the societal impact of additive manufacturing from a technical perspec- tive. Abundance of evidences were found to support the promises of additive manufacturing in the following areas: (1) customized healthcare products to improve population health and quality of life, (2) reduced environmental impact for manufacturing sustainability, and (3) simplified supply chain to increase efficiency and responsiveness in demand fulfillment. In the mean time, the review also identified the need for further research in the areas of life-cycle energy consumption evaluation and potential occupation hazard assessment for additive manufacturing.}, - isbn = {0268-3768}, - keywords = {Additive manufacturing,Energy consumption,Environmental impact,Health and wellbeing,Supply chain}, - file = {/Users/fabio/Zotero/storage/YARFQKFH/Huang et al. - 2013 - Additive manufacturing and its societal impact A literature review.pdf} -} - -@article{Huang2018, - title = {Rheological Characterization of Polymer/Ceramic Blends for {{3D}} Printing of Bone Scaffolds}, - author = {Huang, Boyang and B{\'a}rtolo, Paulo Jorge}, - year = {2018}, - month = jul, - journal = {Polymer Testing}, - volume = {68}, - pages = {365--378}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2018.04.033} -} - -@article{Huang2020, - title = {Modelling the Global Impact of {{China}}'s Ban on Plastic Waste Imports}, - author = {Huang, Qiao and Chen, Guangwu and Wang, Yafei and Chen, Shaoqing and Xu, Lixiao and Wang, Rui}, - year = {2020}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {154}, - pages = {104607}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104607} -} - -@article{Huang2020a, - title = {A Survey of Design Methods for Material Extrusion Polymer {{3D}} Printing}, - author = {Huang, Jiaqi and Chen, Qian and Jiang, Hao and Zou, Bin and Li, Lei and Liu, Jikai and Yu, Huangchao}, - year = {2020}, - journal = {Virtual and Physical Prototyping}, - volume = {0}, - number = {0}, - pages = {1--15}, - publisher = {{Taylor \& Francis}}, - issn = {17452767}, - doi = {10.1080/17452759.2019.1708027}, - abstract = {In recent years, additive manufacturing technology has been highly focused on its strong capability in complex geometry manufacturing and great suitability for customised product fabrication. Researchers have recognised the key role of additive manufacturing in leading the next-generation manufacturing, and have conducted extensive research from different aspects, including product design, process development, material modelling and many others. Several design-for-additive manufacturing methods have been proposed, specifically about design, and different computer-aided programmes have been developed, such as geometric modelling-based design, bio-inspired design, evolutionary algorithm-driven design and topology optimisation. However, authors have observed that many of these methods are named `design for additive manufacturing' without specifying the exact additive manufacturing process. This could be problematic since a general design method cannot reflect the best practice given a specific additive manufacturing process. In this review paper, material extrusion polymer 3D printing is focused specifically. The motive of this paper is to conduct a literature survey about design methods for material extrusion polymer 3D printing, summarising the state of the art and pointing out the underdeveloped research topics; more importantly, some general design-for-additive manufacturing methods will be discussed, especially for their adaption to the material extrusion process.}, - keywords = {additive manufacturing,computer-aided design,Fused deposition modelling,Material extrusion,topology optimisation}, - file = {/Users/fabio/Zotero/storage/W9XT8EPS/A survey of design methods for material extrusion polymer 3D printing.pdf} -} - -@article{huangAdvancesConsumerInnovation2021, - title = {Advances in Consumer Innovation Resistance Research: {{A}} Review and Research Agenda}, - author = {Huang, Dan and Jin, Xin and Coghlan, Alexandra}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120594}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120594}, - urldate = {2021-02-14}, - abstract = {Innovation resistance is an emerging area of research in marketing. This study delineates the state of the art in consumer innovation resistance literature and advances theoretical development in this area by providing a systematic review of 152 articles extracted from the Scopus database. The articles were analyzed using multiple-perspective document co-citation analysis and content analysis, aided by CiteSpace and Leximancer, to identify intellectual foundations, research topics, contexts, and methods of existing literature. Based on the results of the review and expert interviews, this study then discussed six research avenues: (1) operationalizing innovation resistance; (2) factors leading to innovation resistance; (3) a process-based perspective; (4) the consequences of innovation resistance; (5) emerging key research contexts; and (6) strategies to overcome innovation resistance. The study contributes to an overall understanding of current literature on innovation resistance and reveals future research domains.}, - keywords = {Bibliometric method,Co-citation analysis,Consumer behavior,Content analysis,Innovation resistance,Literature review} -} - -@article{huangAdvancingNovelLargescale2021, - title = {Advancing a Novel Large-Scale Assessment Integrating Ecosystem Service Flows and Real Human Needs: {{A}} Comparison between {{China}} and the {{United States}}}, - author = {Huang, Zhixun and Zhang, Yanlong and Wang, Feifei and Cao, Wenzhi}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {314}, - pages = {128022}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128022}, - urldate = {2021-07-05} -} - -@article{huangDefiningMeasuringUrban2015, - title = {Defining and Measuring Urban Sustainability: A Review of Indicators}, - author = {Huang, Lu and Wu, Jianguo and Yan, Lijiao}, - year = {2015}, - journal = {Landscape Ecology}, - volume = {30}, - number = {7}, - pages = {1175--1193}, - issn = {15729761}, - doi = {10.1007/s10980-015-0208-2}, - urldate = {2021-08-29}, - abstract = {Context: The sustainability of urban areas is essential to the sustainability of regions, nations, and the world as a whole. Urban sustainability indicators (USIs) can play an important role in advancing the science and practice of sustaining urban systems. Objectives: We review the key concepts of urban sustainability and commonly used indicators for gauging the state and progress of urban sustainability, and discuss how USIs can be further improved from a landscape ecology perspective. Methods: This review is based primarily on peer-reviewed journal papers, as well as books, and documents published by international organizations, governmental agencies, and research institutions. We systematically examine what USIs actually measure and whether they are adequate for gauging urban sustainability, and then discuss major problems and challenges as well as ways forward in developing and applying USIs. Results: Numerous USIs have been developed, including single composite indices and indicator sets. This paper focuses on three indicator sets and ten composite indices. Eight of them cover all the three dimensions of sustainability (environment, economy, and society), and five cover two of the three. Five of them measure strong sustainability, and eight only indicate weak sustainability. Conclusions: Urban sustainability indicators abound, and so do problems with them. These include technical issues of normalization, weighting, and aggregation (upscaling), as well as conceptual issues of indicator selection, boundary delineation, heterogeneity, scale, and strong versus weak sustainability. To overcome these problems, principles and methods in landscape ecology\textemdash particularly those of landscape metrics, spatial scaling, and landscape sustainability\textemdash have much to offer, and this represents a challenging and fruitful research direction for both landscape and urban scientists in the coming decades.}, - keywords = {Indicator frameworks,Landscape sustainability,Sustainable cities,Urban sustainability indicators,Urbanization}, - file = {/Users/fabio/Zotero/storage/SHISSVJK/full-text.pdf} -} - -@article{huangDevelopingNovelApproach2022, - title = {Developing a {{Novel Approach Integrating Ecosystem Services}} and {{Biodiversity}} for {{Identifying Priority Ecological Reserves}}}, - author = {Huang, Zhixun and Qian, Lingying and Cao, Wenzhi}, - year = {2022}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {179}, - pages = {106128}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106128}, - urldate = {2022-01-25} -} - -@article{Hubbard2020, - title = {Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter {{COVID-19}} Response}, - author = {Hubbard, Benjamin R. and Pearce, Joshua M.}, - year = {2020}, - month = oct, - journal = {HardwareX}, - volume = {8}, - pages = {e00129}, - issn = {24680672}, - doi = {10.1016/j.ohx.2020.e00129} -} - -@article{hueskeMultilevelBarrierDriver2021, - title = {Multilevel Barrier and Driver Analysis to Improve Sustainability Implementation Strategies: Towards Sustainable Operations in Institutions of Higher Education}, - author = {Hueske, Anne-Karen and Guenther, Edeltraud}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {291}, - pages = {125899}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.125899}, - urldate = {2021-02-05} -} - -@article{Huhtelin2015, - title = {A {{Co-creation Centre}} for {{University}}\textendash{{Industry Collaboration}} \textendash{} {{A Framework}} for {{Concept Development}}}, - author = {Huhtelin, Mervi and Nenonen, Suvi}, - year = {2015}, - journal = {Procedia Economics and Finance}, - volume = {21}, - number = {15}, - pages = {137--145}, - publisher = {{Elsevier B.V.}}, - issn = {22125671}, - doi = {10.1016/S2212-5671(15)00160-4}, - abstract = {It is argued in general that future success in effective innovation creation is built on the ability to connect and manage talent, partnerships and related practical innovation processes. This makes it challenging for a university to develop an ecosystem of knowledge creation. The full benefit from a university can only be obtained if the university and society are organically linked together. The needs of society have to be at the centre of a university's activities, and flexible adjustment to changing needs is necessary but often lacking. Campus management has a major role in the facilitation of multidisciplinary interaction between students, scientists, entrepreneurs and other industry partners that inspire each other with different perspectives on the same subject. One significant tool to support open innovation with diverse stakeholders is to provide supportive spaces with relevant services. This paper aims to identify the requirements of a Co-creation Centre as a concept serving the third role of auniversity. The literature review was conducted and, based on the result, this paper proposes a conceptual framework for capturing the key requirements for developing a multiuser Co-creation Centre. The framework consists ofthe requirements on the demand and supply sides of campus management. The main findings in this paper are that different modes of knowledge conversion have different capabilities tosupport knowledge co-creation requirements. Knowledge co-creation process requirements in the multiuser Co-creation Centre for university\textendash industry collaboration are best supported by originating ``Ba'', which means the place where individuals share feelings, emotions, experiences, and mental models and the place where the knowledge-creation process begins. The results contribute to the concept development in campus management and provide a starting point for evaluating the success of multidisciplinary and multi-actor innovation environments.}, - isbn = {22125671}, - keywords = {2015 published by elsevier,2212-5671,358 50 364 4173,access article under the,b,ba,campus management,cc by-nc-nd license,co-creation centre,corresponding author,e-mail address,fi,huhtelin,mervi,spaces and services,sykoy,tel,this is an open,v} -} - -@article{huInnovationPublicThird2021, - title = {Innovation, the Public and the Third Space: Understanding the Role of Boundary Objects in Open Laboratory Work}, - author = {Hu, Mengwei and Fritzsche, Albrecht}, - year = {2021}, - month = may, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--12}, - publisher = {{Informa UK Limited}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1928627}, - urldate = {2021-06-08}, - abstract = {We study how the design of work environments in open laboratories affects the engagement of visitors in innovation processes. For this purpose, we present evidence from an embedded case study of five innovation projects in an open laboratory in Central Europe. Theoretically, we build on the concept of boundary objects and investigate which types of boundaries are addressed by the design of the different work environments. We identify three interaction schemes in which boundaries are addressed very differently. We find that open laboratories as spaces for interaction between different organisations and communities can give account of multiple perspectives on innovation and diverging attributions of meaning, if appliances and equipment in the labs allow for the emergence of appropriate boundary objects.}, - keywords = {Boundary objects,participatory design,third space,user innovation} -} - -@patent{hull1986, - title = {Apparatus for Production of Three-Dimensional Objects by Stereolithography}, - author = {Hull, C.W.}, - year = {1986}, - address = {{United States}} -} - -@article{hultmanResourcificationManifestoUnderstanding2021, - title = {A Resourcification Manifesto: {{Understanding}} the Social Process of Resources Becoming Resources}, - author = {Hultman, Johan and Corvellec, Herv{\'e} and Jerneck, Anne and Arvidsson, Susanne and Ekroos, Johan and Gustafsson, Clara and Lundh Nilsson, Fay and Wahlberg, Niklas}, - year = {2021}, - month = nov, - journal = {Research Policy}, - volume = {50}, - number = {9}, - pages = {104297}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104297}, - urldate = {2021-06-15}, - file = {/Users/fabio/Zotero/storage/B9VATS6Z/full-text.pdf} -} - -@article{hummenWhenReplaceProducts2021, - title = {When to Replace Products with Which (Circular) Strategy? {{An}} Optimization Approach and Lifespan Indicator}, - author = {Hummen, Torsten and Desing, Harald}, - year = {2021}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {174}, - pages = {105704}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105704}, - urldate = {2021-07-05}, - file = {/Users/fabio/Zotero/storage/6N2EK7TB/full-text.pdf} -} - -@article{Hung2019, - title = {Individuals' Intentions to Mitigate Air Pollution: {{Vehicles}}, Household Appliances, and Religious Practices}, - author = {Hung, Ming-Feng and Chang, Chiung-Ting and Shaw, Daigee}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {227}, - pages = {566--577}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.163} -} - -@article{Hunt2015, - title = {Polymer Recycling Codes for Distributed Manufacturing with 3-{{D}} Printers}, - author = {Hunt, Emily J. and Zhang, Chenlong and Anzalone, Nick and Pearce, Joshua M.}, - year = {2015}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {97}, - pages = {24--30}, - publisher = {{Elsevier B.V.}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2015.02.004}, - file = {/Users/fabio/Zotero/storage/Q43ZYPAE/Hunt et al. - 2015 - Polymer recycling codes for distributed manufacturing with 3-D printers.pdf} -} - -@article{huovilaCarbonneutralCitiesCritical2022, - title = {Carbon-Neutral Cities: {{Critical}} Review of Theory and Practice}, - author = {Huovila, Aapo and Siikavirta, Hanne and Antu{\~n}a Rozado, Carmen and R{\"o}kman, Jyri and Tuominen, Pekka and Paiho, Satu and Hedman, {\AA}sa and Yl{\'e}n, Peter}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {341}, - pages = {130912}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130912}, - urldate = {2022-03-07}, - abstract = {Carbon neutrality has become central in policy discourse and cities' climate actions are crucial to achieve this goal. Consequently, many cities have already published ambitious climate neutrality target years and are preparing for transition to climate neutrality. This study presents findings from the first ever literature review on the carbon-neutral city concept, covering definition, assessment approaches, and barriers and drivers for transition to carbon neutrality. These findings are combined with interviews with Finnish cities aiming at carbon neutrality to explore gaps between research and practice. More clarity is needed on the definition of carbon-neutral city concept and especially on the role of offsetting the emissions (a specific feature compared to other urban climate concepts). The lack of consistency in city carbon accounting methods and emission scopes making cities' carbon neutrality goals incomparable, thus calling for harmonization and guidance on common assessment methods. In addition to research, climate networks play an important role in the transition to carbon neutrality. Cities have set ambitious goals and need support to develop action plans, assess actions, come up with creative and innovative ideas and increase collaboration with various stakeholders. Development of ways to support cities that have taken on ambitious carbon neutrality targets would benefit from more systematic research on transition to carbon neutrality from different contexts capturing the lessons learned. There is a need for methods that are flexible enough to accommodate adjustments to local conditions and needs, but also consider broader system transition.}, - keywords = {Carbon accounting,Carbon-neutral city,Climate mitigation,Local climate plan,Urban transition}, - file = {/Users/fabio/Zotero/storage/U5YK9K96/full-text.pdf} -} - -@article{hupkesShiftingNonanthropocentrismDialogue2022, - title = {Shifting towards Non-Anthropocentrism: {{In}} Dialogue with Speculative Design Futures}, - author = {Hupkes, Tisha and Hedman, Anders}, - year = {2022}, - month = jun, - journal = {Futures}, - volume = {140}, - pages = {102950}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2022.102950}, - urldate = {2022-05-23} -} - -@article{hurmelinna-laukkanenDistinguishingAppropriabilityAppropriation2022, - title = {Distinguishing between Appropriability and Appropriation: {{A}} Systematic Review and a Renewed Conceptual Framing}, - author = {{Hurmelinna-Laukkanen}, Pia and Yang, Jialei}, - year = {2022}, - month = jan, - journal = {Research Policy}, - volume = {51}, - number = {1}, - pages = {104417}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104417}, - urldate = {2021-12-01} -} - -@article{hurmelinna-laukkanenOrchestratingLeadUser2021, - title = {Orchestrating for Lead User Involvement in Innovation Networks}, - author = {{Hurmelinna-Laukkanen}, Pia and N{\"a}tti, Satu and Pikkarainen, Minna}, - year = {2021}, - month = dec, - journal = {Technovation}, - volume = {108}, - pages = {102326}, - publisher = {{Elsevier}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2021.102326}, - urldate = {2021-07-05}, - file = {/Users/fabio/Zotero/storage/XU7G5XQ5/full-text.pdf} -} - -@article{hussainThematicAnalysisCircular2023, - title = {Thematic Analysis of Circular Economy Practices across Closed-Loop Supply Chains: {{An}} Institutional Theory Perspective}, - shorttitle = {Thematic Analysis of Circular Economy Practices across Closed-Loop Supply Chains}, - author = {Hussain, Matloub and Khan, Mehmood and Saber, Hussein}, - year = {2023}, - month = sep, - journal = {Sustainable Production and Consumption}, - volume = {40}, - pages = {122--134}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.06.017}, - urldate = {2023-07-03}, - abstract = {A circular economy (CE) presents an alternative solution to the scarcity of natural resources and environmental concerns. Institutional pressures motivate adopting and developing CE practices in various supply chain stages (SC), and successful implementation across the SC is challenging and risky. The situation is more complicated in the closed-loop supply chain (CLSC) structure. This study explores CE practices at different SC stages and the impact of their implementation on CLSC performance. This study uses a mapping tool for decision-making: SIPOC (suppliers, inputs, process, outputs, customers). We adapt and rename this tool as ``circular SIPOC'' based on the feed-forward and feedback flow of the complete material across different CLSC tiers. A circular SIPOC chart, coupled with institutional theory, is used to identify CE techniques from the three manufacturing CLSCs of the United Arab Emirates (UAE), supported by thematic analysis. The findings indicate two unique and standard practice classifications in SCs. They further show that traditional practices are easy to implement, while individual practices have medium to great difficulty in implementation and related SC performance. This study's contribution is the detailed list of CE-based practices in three CLSCs and the criticality of their implementation. Following the institutional theory, government institutions may use the findings of this study to put coercive, normative, and mimetic pressure on organizations, encouraging the adoption of these CE practices and helping bring the CE a step closer.}, - langid = {english}, - keywords = {Circular economy,Circular supply chains,Customers),Inputs,Institutional theory,Outputs,Process,SIPOC (suppliers}, - file = {/Users/fabio/Zotero/storage/2XS2A5C8/S2352550923001495.html} -} - -@article{Hutchins2019, - title = {Development of Indicators for the Social Dimension of Sustainability in a {{U}}.{{S}}. Business Context}, - author = {Hutchins, Margot J. and Richter, Justin S. and Henry, Marisa L. and Sutherland, John W.}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {687--697}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.11.199} -} - -@article{Hutmacher2004, - title = {Scaffold-Based Tissue Engineering: Rationale for Computer-Aided Design and Solid Free-Form Fabrication Systems.}, - author = {Hutmacher, Dietmar W and Sittinger, Michael and Risbud, Makarand V}, - year = {2004}, - month = jul, - journal = {Trends in biotechnology}, - volume = {22}, - number = {7}, - eprint = {15245908}, - eprinttype = {pubmed}, - pages = {354--62}, - issn = {0167-7799}, - doi = {10.1016/j.tibtech.2004.05.005}, - urldate = {2014-01-22}, - abstract = {One of the milestones in tissue engineering has been the development of 3D scaffolds that guide cells to form functional tissue. Recently, mouldless manufacturing techniques, known as solid free-form fabrication (SFF), or rapid prototyping, have been successfully used to fabricate complex scaffolds. Similarly, to achieve simultaneous addition of cells during the scaffold fabrication, novel robotic assembly and automated 3D cell encapsulation techniques are being developed. As a result of these technologies, tissue-engineered constructs can be prepared that contain a controlled spatial distribution of cells and growth factors, as well as engineered gradients of scaffold materials with a predicted microstructure. Here, we review the application, advancement and future directions of SFF techniques in the design and creation of scaffolds for use in clinically driven tissue engineering.}, - pmid = {15245908}, - keywords = {Artificial,Biocompatible Materials,Biocompatible Materials: chemical synthesis,Biocompatible Materials: chemistry,Cell Culture Techniques,Cell Culture Techniques: instrumentation,Cell Culture Techniques: methods,Computer-Aided Design,Equipment Design,Equipment Design: methods,Equipment Failure Analysis,Equipment Failure Analysis: methods,Manufactured Materials,Manufactured Materials: analysis,Materials Testing,Materials Testing: methods,Membranes,Tissue Engineering,Tissue Engineering: instrumentation,Tissue Engineering: methods}, - file = {/Users/fabio/Zotero/storage/34T36CHS/Hutmacher, Sittinger, Risbud - 2004 - Scaffold-based tissue engineering rationale for computer-aided design and solid free-form fabricat.pdf} -} - -@article{huybrechtsInstitutioningParticipatoryDesign2017, - title = {Institutioning: {{Participatory Design}}, {{Co-Design}} and the Public Realm}, - author = {Huybrechts, Liesbeth and Benesch, Henric and Geib, Jon}, - year = {2017}, - month = jul, - journal = {CoDesign}, - volume = {13}, - number = {3}, - pages = {148--159}, - publisher = {{Taylor and Francis Ltd.}}, - issn = {17453755}, - doi = {10.1080/15710882.2017.1355006}, - urldate = {2022-03-13}, - abstract = {In this introductory article to the special issue `Co-Design and the public realm', we discuss a common interest in how meso- and macro-political institutional contexts frame and are informed by Participatory Design (PD) and Co-Design processes. We argue that a unilateral focus within PD and Co-Design on the micro-political scale of fieldwork obscures interactivity with institutional framing processes, undermining their potential as sites of critique and political change. Our argument is drawn from a study of literature on the role of institutions in relation to PD and the public realm and our experience as participants in an EU-funded research project. The case study descriptions unpack how various institutional frames inform PD processes and how, conversely, PD processes inform various institutional frames: metacultural frames, institutional action frames and policy frames. To highlight the move to engaging with and creating new institutions, we introduce the notion of institutioning.}, - keywords = {Co-Design,institutioning,Participatory Design,politics,public realm} -} - -@article{Huysman2017, - title = {Performance Indicators for a Circular Economy: {{A}} Case Study on Post-Industrial Plastic Waste}, - author = {Huysman, Sofie and De Schaepmeester, Jonas and Ragaert, Kim and Dewulf, Jo and De Meester, Steven}, - year = {2017}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {120}, - pages = {46--54}, - publisher = {{Elsevier B.V.}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2017.01.013}, - abstract = {A linear economy approach results in many environmental challenges: resources become depleted and end up as waste and emissions. One of the key strategies to overcome these problems is using waste as a resource, i.e. evolving toward a circular economy. To monitor this transition, suitable indicators are needed that focus on sustainability issues whilst taking into account the technical reality. In this paper, we develop such an indicator to quantify the circular economy performance of different plastic waste treatment options. This indicator is based on the technical quality of the plastic waste stream and evaluates resource consumption by using the Cumulative Exergy Extraction from the Natural Environment (CEENE) method. To illustrate the use of this new indicator, it was applied in a case study on post-industrial plastic waste treatment. The results show that the indicator can be a very useful approach to guide waste streams towards their optimal valorization option, based on quality of the waste flow and the environmental benefit of the different options.}, - isbn = {09213449}, - keywords = {Circular economy,Compatibility,Indicators,LCA,Plastic waste}, - file = {/Users/fabio/Zotero/storage/SUE229CJ/Performance indicators for a circular economy- A case study on post-industrial plastic waste.pdf} -} - -@article{huysveldAdvancingCircularEconomy2019, - ids = {huysveld2019b}, - title = {Advancing Circular Economy Benefit Indicators and Application on Open-Loop Recycling of Mixed and Contaminated Plastic Waste Fractions}, - author = {Huysveld, Sophie and Hubo, Sara and Ragaert, Kim and Dewulf, Jo}, - year = {2019}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {211}, - pages = {1--13}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2018.11.110}, - urldate = {2022-01-04}, - abstract = {Increasing the recycling of plastic waste is a key priority within Europe and its circular economy initiatives. The benefits of recycling however decrease until a cut-off point is reached where recycling becomes environmentally and economically too expensive to achieve a net benefit compared to disposal. To identify this point, suitable indicators with a life cycle perspective are needed. In this study, we analysed the existing Recyclability Benefit Rate and the Recycled Content Benefit Rate indicators, which express the potential environmental benefits from recycling compared to disposal (e.g. incineration) taking into account life cycle thinking. However, improvements of these indicators are still needed. The aim of this research was to advance the existing indicators by introducing improved equations. More specifically, we further developed these indicators in four aspects, i.e. (i) by including the final step (e.g. incineration) in the cascaded use of the material, (ii) by accounting for the same basket of products in the denominator as the one in the nominator of the indicator, (iii) by eliminating confusion about the calculated result when the denominator is negative, and (iv) by introducing a new parameter `d' to account for the lifetime of the product made from recycled material compared to the product made from virgin material. These adjustments clarify and advance the monitoring of the environmental benefits of material cascading. The indicators were applied to a case of mixed and contaminated plastic waste, which showed that recycling is more environmentally beneficial than incineration in this case. The impact of injection moulding of the new product was significant due to its energy consumption, and higher for the recycled material. Future research could focus on an economic cost-benefit analysis to complement this environmental analysis. Additionally, the practical implementation of accounting for the lifetime difference between the recycled and the virgin material needs further research.}, - keywords = {Benefit indicators,Circular economy,Material cascading,Open-loop,Plastic waste,Recycling}, - file = {/Users/fabio/Zotero/storage/UNBPIND3/Huysveld et al. - 2019 - Advancing circular economy benefit indicators and .pdf} -} - -@article{huysveldTechnicalMarketSubstitutability2022, - ids = {huysveld2022a}, - title = {Technical and Market Substitutability of Recycled Materials: {{Calculating}} the Environmental Benefits of Mechanical and Chemical Recycling of Plastic Packaging Waste}, - shorttitle = {Technical and Market Substitutability of Recycled Materials}, - author = {Huysveld, S. and Ragaert, K. and Demets, R. and Nhu, T. T. and {Civancik-Uslu}, D. and Kusenberg, M. and Van Geem, K. M. and De Meester, S. and Dewulf, J.}, - year = {2022}, - month = oct, - journal = {Waste Management}, - volume = {152}, - pages = {69--79}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.08.006}, - urldate = {2022-09-18}, - abstract = {Most plastics are today mechanically recycled (MR), whereas chemical recycling (CR) is an emerging technology. Substitutability of virgin material is vital for their environmental performance assessed through life cycle assessment (LCA). MR faces the reduction in the material's technical quality but also the potential market because legal safety requirements currently eliminate applications such as food packaging. This study presents a data-driven method for quantifying the overall substitutability (OS), composed of technical (TS) and market substitutability (MS). First, this is illustrated for six non-food contact material (non-FCM) applications and three hypothetical future FCM applications from mechanical recyclates, using mechanical property and market data. Then, OS results are used in a comparative LCA of MR and thermochemical recycling (TCR) of several plastic waste fractions in Belgium. For mechanical recyclates, TS results for the studied non-FCM and FCM applications were comparable, but OS results varied between 0.35 and 0.79 for non-FCM applications and between 0.78 and 1 for FCM applications, reflecting the lower MS results for the current situation. Out of nine application scenarios, MR obtained a worse resource consumption and terrestrial acidification impact than CR in six scenarios. MR maintained the lowest global warming impact for all scenarios. This study contributes to an improved understanding of the environmental benefits of MR and TCR. Inclusion of other criteria (e.g. processability, colour, odour) in the quantification of the overall substitutability for MR products should be further investigated, as well as the environmental performance of TCR at industrial scale.}, - langid = {english}, - keywords = {Chemical recycling,Food packaging,Life cycle assessment,Mechanical Recycling,Plastic waste,Substitutability}, - file = {/Users/fabio/Zotero/storage/PRZL7T6M/Huysveld et al. - 2022 - Technical and market substitutability of recycled .pdf;/Users/fabio/Zotero/storage/Q4Y7R6BU/S0956053X22004081.html} -} - -@article{Hwang2019, - title = {Extending Technological Trajectories to Latest Technological Changes by Overcoming Time Lags}, - author = {Hwang, Seonho and Shin, Juneseuk}, - year = {2019}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {143}, - pages = {142--153}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.04.013}, - urldate = {2020-05-10}, - abstract = {Bibliometric methods of mapping technological trajectories encounter difficulty when identifying recent technological changes, mainly due to two forms of time lag: publication lag between invention and patent publication, and citation lag between publication and citation. To address this problem, we propose a novel way of identifying recent important publications, and of automatically connecting these to the patents-based main path. Our method reduces truncation bias due to publication and citation lags, and extends the technological trajectory to reach the latest technology at the research forefront. By generating links between patent and product, our approach can anticipate future product features that are driven by technological changes. In practice, our method enables managers to identify incremental innovation opportunities along mainstream technology dynamics, and further to detect signals of emerging technologies, wild cards, and new applications in other disciplines. An illustrative case regarding image technology is described and discussed.}, - keywords = {Citation lag,Main path,Publication lag,Technological trajectory} -} - -@article{hysingChallengesOpportunitiesEcosystem2021, - title = {Challenges and Opportunities for the {{Ecosystem Services}} Approach: {{Evaluating}} Experiences of Implementation in {{Sweden}}}, - author = {Hysing, Erik}, - year = {2021}, - month = dec, - journal = {Ecosystem Services}, - volume = {52}, - pages = {101372}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2021.101372}, - urldate = {2021-11-07} -} - -@article{iacobucciInnovationPerformanceTraditional2023, - title = {Innovation Performance in Traditional Industries: {{Does}} Proximity to Universities Matter}, - shorttitle = {Innovation Performance in Traditional Industries}, - author = {Iacobucci, Donato and Perugini, Francesco}, - year = {2023}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {189}, - pages = {122340}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122340}, - urldate = {2023-02-12}, - abstract = {Firms operating in traditional industries are characterized by low investment in R\&D and little capabilities for autonomous innovation. This situation is changing given the increasing relevance of general purpose technologies, such as ICT. As a result, the innovative performance of firms in these sectors should be more dependent on the interaction with firms and institutions outside their production chain. The aim of this paper is to analyze to what extent the proximity to universities affects firms' capability to innovate as opposed to the other characteristics of the local context, such as specialization or variety, which motivated firms' location choice. The analysis focuses on Italian firms in traditional industries: agri-food, textile and clothing, leather and footwear. The empirical evidence suggests that the local context still plays a relevant role for the innovative performance of traditional firms while proximity to a university is not always statistically significant.}, - langid = {english}, - keywords = {Innovation,Traditional industries,University knowledge spillovers}, - file = {/Users/fabio/Zotero/storage/XZ49DMWF/Iacobucci_Perugini_2023_Innovation performance in traditional industries.pdf;/Users/fabio/Zotero/storage/H26YFKFU/S0040162523000252.html} -} - -@article{Iacovidou2019, - title = {Quality of Resources: {{A}} Typology for Supporting Transitions towards Resource Efficiency Using the Single-Use Plastic Bottle as an Example}, - author = {Iacovidou, Eleni and Velenturf, Anne P.M. and Purnell, Phil}, - year = {2019}, - month = jan, - journal = {Science of The Total Environment}, - volume = {647}, - pages = {441--448}, - issn = {00489697}, - doi = {10.1016/j.scitotenv.2018.07.344}, - file = {/Users/fabio/Zotero/storage/GHGMMKJW/Quality of resources- A typology for supporting transitions towards resource efficiency using the single-use plastic bottle as an example.pdf} -} - -@article{Iakovou2010, - title = {Waste Biomass-to-Energy Supply Chain Management: {{A}} Critical Synthesis}, - author = {Iakovou, E and Karagiannidis, A and Vlachos, D and Toka, A and Malamakis, A}, - year = {2010}, - journal = {Waste Management}, - volume = {30}, - number = {10}, - pages = {1860--1870}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2010.02.030}, - urldate = {2021-01-05}, - abstract = {The development of renewable energy sources has clearly emerged as a promising policy towards enhancing the fragile global energy system with its limited fossil fuel resources, as well as for reducing the related environmental problems. In this context, waste biomass utilization has emerged as a viable alternative for energy production, encompassing a wide range of potential thermochemical, physicochemical and bio-chemical processes. Two significant bottlenecks that hinder the increased biomass utilization for energy production are the cost and complexity of its logistics operations. In this manuscript, we present a critical synthesis of the relative state-of-the-art literature as this applies to all stakeholders involved in the design and management of waste biomass supply chains (WBSCs). We begin by presenting the generic system components and then the unique characteristics of WBSCs that differentiate them from traditional supply chains. We proceed by discussing state-of-the-art energy conversion technologies along with the resulting classification of all relevant literature. We then recognize the natural hierarchy of the decision-making process for the design and planning of WBSCs and provide a taxonomy of all research efforts as these are mapped on the relevant strategic, tactical and operational levels of the hierarchy. Our critical synthesis demonstrates that biomass-to-energy production is a rapidly evolving research field focusing mainly on biomass-to-energy production technologies. However, very few studies address the critical supply chain management issues, and the ones that do that, focus mainly on (i) the assessment of the potential biomass and (ii) the allocation of biomass collection sites and energy production facilities. Our analysis further allows for the identification of gaps and overlaps in the existing literature, as well as of critical future research areas. \textcopyright{} 2010 Elsevier Ltd.}, - pmid = {20231084}, - file = {/Users/fabio/Zotero/storage/6LRXN5YX/full-text.pdf} -} - -@article{Idrees2018, - title = {Three-{{Dimensional-Printed Sustainable Biochar-Recycled PET Composites}}}, - author = {Idrees, Mohanad and Jeelani, Shaik and Rangari, Vijaya}, - year = {2018}, - month = nov, - journal = {ACS Sustainable Chemistry \& Engineering}, - volume = {6}, - number = {11}, - pages = {13940--13948}, - issn = {2168-0485}, - doi = {10.1021/acssuschemeng.8b02283}, - file = {/Users/fabio/Zotero/storage/C3B8QR9E/Three-Dimensional-Printed Sustainable Biochar-Recycled PETComposites.pdf} -} - -@misc{IEEEXploreFulltext, - title = {{{IEEE}} Xplore Full-Text {{PDF}}:}, - urldate = {2020-11-06} -} - -@article{Ijassi2022, - title = {Characterizing Urban Factories by Their Value Chain: A First Step towards More Sustainability in Production}, - author = {Ijassi, Walid and Evrard, Damien and Zwolinski, Peggy}, - year = {2022}, - journal = {Procedia CIRP}, - volume = {105}, - pages = {290--295}, - issn = {22128271}, - doi = {10.1016/j.procir.2022.02.048}, - urldate = {2022-03-24}, - abstract = {In today's business environment, the trend towards more product variety and customization is unbroken. Due to this development, the need of agile and reconfigurable production systems emerged to cope with various products and product families. To design and optimize production systems as well as to choose the optimal product matches, product analysis methods are needed. Indeed, most of the known methods aim to analyze a product or one product family on the physical level. Different product families, however, may differ largely in terms of the number and nature of components. This fact impedes an efficient comparison and choice of appropriate product family combinations for the production system. A new methodology is proposed to analyze existing products in view of their functional and physical architecture. The aim is to cluster these products in new assembly oriented product families for the optimization of existing assembly lines and the creation of future reconfigurable assembly systems. Based on Datum Flow Chain, the physical structure of the products is analyzed. Functional subassemblies are identified, and a functional analysis is performed. Moreover, a hybrid functional and physical architecture graph (HyFPAG) is the output which depicts the similarity between product families by providing design support to both, production system planners and product designers. An illustrative example of a nail-clipper is used to explain the proposed methodology. An industrial case study on two product families of steering columns of thyssenkrupp Presta France is then carried out to give a first industrial evaluation of the proposed approach.}, - keywords = {Assembly,Design method,Family identification}, - file = {/Users/fabio/Zotero/storage/UP8NLATQ/full-text.pdf} -} - -@article{ikeProcessSelectingPrioritising2019, - title = {The Process of Selecting and Prioritising Corporate Sustainability Issues: {{Insights}} for Achieving the {{Sustainable Development Goals}}}, - author = {Ike, Masayoshi and Donovan, Jerome Denis and Topple, Cheree and Masli, Eryadi Kordi}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117661}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117661}, - urldate = {2020-06-18}, - abstract = {The Sustainable Development Goals are a set of 17 wide ranging goals that articulates the desired outcome of sustainable development. The private sector is a key factor in achieving these goals through actions of corporate sustainability. However, there is a paucity of research regarding the application of Sustainable Development Goals at the firm level and it remains unclear how the private sector can operationalise and achieve the goals through corporate sustainability. While every Sustainable Development Goal is deemed of equal importance, it is up to individual firms to interpret and prioritise their implementation. Using a case study approach, this paper identified the specific goals considered by Japanese manufacturing multinational enterprises as a priority when establishing or significantly expanding operations in developing countries. The methodology employed allowed the retrospective analysis of corporate sustainability data through a Sustainable Development Goal lens. In-depth, semi-structured interviews were carried out with 58 respondents from 16 sample firms operating in the Philippines, Indonesia, Thailand and Vietnam. The results show the multinational enterprises in the sample focus on a particular set of Sustainable Development Goals when establishing, or significantly expanding, subsidiary operations in the Philippines, Indonesia, Thailand and Vietnam. The findings show policy makers in the host countries should ensure Sustainable Development Goals such as education and strong institutions are in place to attract multinational enterprises to their shores. Other stakeholders such as non-governmental organisations and the community were also seen to influence the prioritisation of certain goals considered by firms.}, - keywords = {Association of Southeast Asian Nations,Corporate sustainability,Goal prioritisation,Manufacturing multinational enterprises,Sustainable development goals} -} - -@book{ILCD2011, - title = {International {{Reference Life Cycle Data System}} ({{ILCD}}) {{Handbook}} :General Guide for Life Cycle Assessment : Detailed Guidance}, - shorttitle = {International {{Reference Life Cycle Data System}} ({{ILCD}}) {{Handbook}}}, - author = {IES}, - year = {2010}, - publisher = {{Publications Office of the European Union}}, - address = {{LU}}, - urldate = {2022-09-13}, - abstract = {Life Cycle Thinking (LCT) and Life Cycle Assessment (LCA) are the scientific approaches behind modern environmental policies and business decision support related to Sustainable Consumption and Production (SCP). The International Reference Life Cycle Data System (ILCD) provides a common basis for consistent, robust and quality-assured life cycle data and studies. Such data and studies support coherent SCP instruments, such as Ecolabelling, Ecodesign, Carbon footprinting, and Green Public Procurement. This guide is a component of the International Reference Life Cycle Data System (ILCD) Handbook. It provides technical guidance for detailed Life Cycle Assessment (LCA) studies and provides the technical basis to derive product-specific criteria, guides, and simplified tools. It is based on and conforms to the ISO 14040 and 14044 standards on LCA. The principle target audience for this guide is the LCA practitioner as well as technical experts in the public and private sector dealing with environmental decision support related to products, resources, and waste management.}, - isbn = {978-92-79-19092-6}, - langid = {english}, - lccn = {LB-NA-24708-EN-C} -} - -@article{ilesExpandingBioplasticsProduction2013, - ids = {Iles2013}, - title = {Expanding Bioplastics Production: Sustainable Business Innovation in the Chemical Industry}, - author = {Iles, Alastair and Martin, Abigail N.}, - year = {2013}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {45}, - pages = {38--49}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2012.05.008}, - urldate = {2022-01-04}, - abstract = {The case of bioplastics illustrates how business models can link producers and customers through the development of new technologies and products. Chemical companies have assumed that reducing costs, increasing yields, and developing better feedstock supplies will guarantee the success of bioplastics in the market, yet a number of unconventional hurdles exist. Companies need to build markets for bioplastics and to assure customers that bioplastics are indeed sustainably made. We contend that companies are most able to develop business models that bring bioplastics to market effectively when they develop and mobilize their "dynamic capabilities" around sustainability. DuPont, BASF, and Braskem have identified new market opportunities for bioplastics, designed distinctive types of business models to seize these opportunities, and devised ways to create increased value by communicating performance advantages and environmental impact reduction to downstream entities. Because they have not included societal actors in their efforts to define sustainability, the firms face significant risk that their sustainable value propositions may not endure without further innovations in creating accountability systems. \textcopyright{} 2012 Elsevier Ltd. All rights reserved.}, - keywords = {BASF,Bioplastics,Biopolymers,Braskem,Business models,Chemical industry,DuPont,Dynamic capabilities,Innovation} -} - -@article{illichTOOLSCONVIVIALITY1973, - title = {{{TOOLS FOR CONVIVIALITY}}}, - author = {Illich, Ivan}, - year = {1973}, - pages = {138}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/UN77WTHC/Illich - TOOLS FOR CONVIVIALITY.pdf} -} - -@article{ilyasCircularBioeconomyEnvironmental2021, - title = {Circular Bioeconomy and Environmental Benignness through Microbial Recycling of E-Waste: {{A}} Case Study on Copper and Gold Restoration}, - author = {Ilyas, Sadia and Srivastava, Rajiv R. and Kim, Hyunjung and Das, Subhankar and Singh, Vinay K.}, - year = {2021}, - month = feb, - journal = {Waste Management}, - volume = {121}, - pages = {175--185}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.12.013}, - urldate = {2021-01-01} -} - -@misc{imagejImageProcessingAnalysis2023, - title = {Image Processing and Analysis in {{Java}}}, - author = {ImageJ}, - year = {2023}, - urldate = {2023-06-13}, - howpublished = {https://imagej.nih.gov/ij/download.html}, - file = {/Users/fabio/Zotero/storage/D4IVH79Z/download.html} -} - -@article{Inayatullah2008, - title = {Six Pillars: {{Futures}} Thinking for Transforming}, - author = {Inayatullah, Sohail}, - year = {2008}, - month = feb, - journal = {foresight}, - volume = {10}, - number = {1}, - pages = {4--21}, - issn = {14636689}, - doi = {10.1108/14636680810855991}, - urldate = {2020-03-14}, - abstract = {Purpose \textendash{} The purpose of this paper is to present a new approach to the study of the future. Design/methodology/approach \textendash{} The paper describes six foundational concepts (the used future, the disowned future, alternative futures, alignment, models of social change, and uses of the future), six questions (will, fear, missing, alternatives, wish, and next steps as related to the future) and six pillars (mapping, anticipating, timing, deepening, creating alternatives, and transforming), giving examples and case studies where appropriate. Findings \textendash{} In an increasingly complex and heterogeneous world, futures studies can help people to recover their agency, and help them to create the world in which they wish to live. Originality/value \textendash{} The paper integrates and builds on a variety of futures studies' concepts, ways of thinking and techniques and integrates them into a new approach. \textcopyright{} 2008, Emerald Group Publishing Limited}, - keywords = {Change management,Economic change,Epistemology,Forward planning,Social dynamics} -} - -@misc{IndustrialConsumerUses, - title = {Industrial and {{Consumer Uses}} of {{Additive Manufacturing}}: {{A Discussion}} of {{Capabilities}}, {{Trajectories}}, and {{Challenges}} - {{Quinlan}} - 2017 - {{Journal}} of {{Industrial Ecology}} - {{Wiley Online Library}}}, - urldate = {2022-09-13}, - howpublished = {https://onlinelibrary-wiley-com.bases-doc.univ-lorraine.fr/doi/10.1111/jiec.12609}, - file = {/Users/fabio/Zotero/storage/BEDUPBIQ/jiec.html} -} - -@misc{IndustrialEcologyEcological, - title = {Industrial {{Ecology}} and {{Ecological Engineering}} - {{Tilley}} - 2003 - {{Journal}} of {{Industrial Ecology}} - {{Wiley Online Library}}}, - urldate = {2022-09-25}, - howpublished = {https://onlinelibrary-wiley-com.bases-doc.univ-lorraine.fr/doi/abs/10.1162/108819803322564325}, - file = {/Users/fabio/Zotero/storage/9GV2DP9N/108819803322564325.html} -} - -@article{Industry2018, - title = {{{INEDIT}}}, - author = {Industry, Transforming European}, - year = {2018}, - volume = {2020}, - keywords = {INEDIT}, - file = {/Users/fabio/Zotero/storage/WXF5VQXQ/Final Proposal.pdf} -} - -@misc{IndustryTenYears, - title = {Industry 4.0 {{Ten Years On}}: {{A Bibliometric}} and {{Systematic Review}} of {{Concepts}}, {{Sustainability Value Drivers}}, and {{Success Determinants}} - {{ScienceDirect}}}, - urldate = {2021-04-14}, - howpublished = {https://www-sciencedirect-com.bases-doc.univ-lorraine.fr/science/article/pii/S0959652621012713?dgcid=rss\_sd\_all} -} - -@article{Inigo2019, - title = {Strengthening the Socio-Ethical Foundations of the Circular Economy: {{Lessons}} from Responsible Research and Innovation}, - author = {Inigo, Edurne A. and Blok, Vincent}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {233}, - pages = {280--291}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.053}, - file = {/Users/fabio/Zotero/storage/2EE7RW4I/Strengthening the socio-ethical foundations of the circular economy- Lessons from responsible research and innovation.pdf} -} - -@article{Innovaci2007, - title = {Espacios de Innovaci\'on {{Spaces}} of Innovation and y Transformaci\'on : El Caso de {{IDEO}} Transformation : The Case of {{IDEO}}}, - author = {Innovaci, Espacios D E and Ideo, E L Caso D E}, - year = {2007}, - pages = {54--59}, - issn = {0717-6996}, - doi = {10.4067/S0717-69962007000200009} -} - -@book{IPBS2019, - title = {Global Assessment Report on Biodiversity and Ecosystem Services of the {{Intergovernmental Science-Policy Platform}} on {{Biodiversity}} and {{Ecosystem Services}}}, - author = {{IPBS}}, - year = {2019}, - journal = {Debating Nature's Value}, - abstract = {English only Plenary of the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services Sixth session Medellin, Colombia, 18-24 March 2018 Agenda item 6 (b) Regional and subregional assessments of biodiversity and ecosystem services: regional and subregional assessment for the Americas Chapters of the regional and subregional assessment of biodiversity and ecosystem services for the Americas Note by the secretariat 1. In paragraph 2 of section III of decision IPBES-3/1, the Plenary of the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES) approved the undertaking of four regional and subregional assessments of biodiversity and ecosystem services for Africa, the Americas, Asia and the Pacific, and Europe and Central Asia (hereinafter referred to as regional assessments) in accordance with the procedures for the preparation of the Platform's deliverables set out in annex I to decision IPBES-3/3, the generic scoping report for the regional assessments of biodiversity and ecosystem services set out in annex III to decision IPBES-3/1, and the scoping reports for each of the four regional assessments (decision IPBES-3/1, annexes IV-VII). 2. In response to decision IPBES-3/1, a set of six chapters (IPBES/6/INF/3-6), together with a summary for policymakers (IPBES/6/4-7), were produced for each of the regional assessments by an expert group, in accordance with the procedures for the preparation of the Platform's deliverables, for consideration by the Plenary at its sixth session. 3. In paragraph 5 of section IV of decision IPBES-6/1, the Plenary approved the summary for policymakers of the regional assessment for the Americas (IPBES/6/15/Add.2) and accepted the chapters of the assessment, on the understanding that the chapters would be revised following the sixth session as document IPBES/6/INF/4/Rev.1 to correct factual errors and to ensure consistency with the summary for policymakers as approved. The annex to the present note, which is presented without formal editing, sets out the final set of chapters of the assessment for the Americas including their executive summaries. 4. A laid-out version of the final regional assessment report of biodiversity and ecosystem services for the Americas (including a foreword, statements from key partners, acknowledgements, a preface, the summary for policymakers, the revised chapters and annexes setting out a glossary and lists of acronyms, authors, review editors and expert reviewers) will be made available on the website of the Platform prior to the seventh session of the Plenary. * Reissued for technical reasons on 24 September 2018. Editors : E. S. Brondizio Settele, J. D\'iaz, S. Ngo, H. T.}, - isbn = {978-3-947851-20-1} -} - -@book{IPCC2017, - title = {{{AR6 Climate Change}} 2021: {{The Physical Science Basis}} \textemdash{} {{IPCC}}}, - author = {{IPCC}}, - year = {2017}, - urldate = {2022-04-04}, - abstract = {The most commonly used equivalent circuit for transformers is the traditional (Steinmetz) T-equivalent proposed toward the end of the 19th century. This model has two leakage impedance branches and one magnetizing branch. The T model properly represents the terminal behavior of the transformer for most low-frequency operating conditions. Another model derived from the principle of duality between magnetic and electric circuits exists, the \textbackslash pi equivalent circuit, which has two magnetizing branches and one leakage branch. This paper shows that while the two equivalent circuits provide the same accuracy in steady state, better accuracy for the calculation of inrush currents is obtained with the \textbackslash pi -equivalent circuit. Laboratory tests performed on three transformers with different characteristics demonstrate that inrush current simulations with the T equivalent circuit can have errors up to 73\%, while the \textbackslash pi equivalent estimates the measurements in every case within a few percent. \textcopyright{} 1986-2012 IEEE.} -} - -@article{Ippolito1995, - title = {Benchmarking of {{Rapid Prototyping Techniques}} in {{Terms}} of {{Dimensional Accuracy}} and {{Surface Finish}}}, - author = {Ippolito, R and Iuliano, L and Gatto, A}, - year = {1995}, - month = jan, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {44}, - number = {1}, - pages = {157--160}, - issn = {00078506}, - doi = {10.1016/S0007-8506(07)62296-3}, - urldate = {2014-03-03}, - file = {/Users/fabio/Zotero/storage/RXY8EUSB/Benchmarking of Rapid Prototyping Techniques in Terms of Dimensional Accuracy and Surface Finish.pdf} -} - -@article{iqbalBlendedSystemThinking2021, - title = {Blended System Thinking Approach to Strengthen the Education and Training in University-Industry Research Collaboration}, - author = {Iqbal, Abeda Muhammad and Khan, Adnan Shahid and Abdullah, Johari and Kulathuramaiyer, Narayanan and Senin, Aslan Amat}, - year = {2021}, - month = mar, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--14}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1905790}, - urldate = {2021-04-21}, - abstract = {University-industry research collaboration (UIRC) is a major source for research and innovations and economic growth. Despite the extensive evidence on the importance of such collaboration in developed and developing countries, the literature related to strengthen such collaboration along with its innovation performance is still scarce. Scholars believed that the impact of education and training on researchers haa a vigorous influence on research and innovations. Moreover, to enhance the competencies of education and training on researchers, it is mandatory to refurbish education and skills system in conjunction with technological infrastructure system along with their reinforcing factors i.e. knowledge sharing and research and development cooperation, respectively. In this paper, we evaluate the influence of education and skills and technological infrastructure system along with their corresponding reinforcing factors in the blended system thinking method to strengthen education and training. Evidence from UIRC in Malaysia provides empirical corroboration that the role of education and skills system and technological infrastructure system along with their reinforcing factors have a positive influence on education and training. Thus, the findings of this research suggest that intensifying the quality of education and skills system and technological infrastructure system with the reinforcing effect can enhance the effectiveness of education and training.}, - keywords = {education and skills system,national innovation system,system thinking,University-industry research collaboration}, - file = {/Users/fabio/Zotero/storage/TX93KM6J/full-text.pdf} -} - -@article{IqbalMohammed2017, - title = {A Low Carbon Footprint Approach to the Reconstitution of Plastics into {{3D-printer}} Filament for Enhanced Waste Reduction}, - author = {Mohammed, Mazher Iqbal and Mohan, Meera and Das, Anirudra and D. Johnson, Mitchell and Singh Badwal, Parminder and McLean, Doug and Gibson, Ian}, - year = {2017}, - month = feb, - journal = {KnE Engineering}, - volume = {2}, - number = {2}, - pages = {234}, - issn = {2518-6841}, - doi = {10.18502/keg.v2i2.621}, - abstract = {{$<$}p{$>$}In this study we aim to investigate recycling of waste plastics products into filaments for use in a typical FDM 3D printing system. We investigate the parameters relating to control of the filament thickness to a variety of different plastic types, which include HDPE and ABS. Following filament generation, parameters were investigated to optimise the print parameters to produce a variety of demonstration models, which test the print resolution. Results suggest that the proposed supply chain can allow for highly repeatable ABS and HDPE filament generation with a diameter of 1.74 {$\pm$} 0.1mm and 1.65 {$\pm$} 0.1mm respectively. Ultimately, the production of usable filaments can provide a viable means of consuming waste plastics and reducing the burden of increased landfill. {$<$}/p{$>$}}, - keywords = {3D printer,filament,plastic,Recycling,waste reduction}, - file = {/Users/fabio/Zotero/storage/XTBM7LQJ/A Low Carbon Footprint Approach to the Reconstitution of Plastics into 3D-Printer Filament for Enhanced Waste Reduction.pdf} -} - -@article{Irie2019, - title = {Makerspaces in {{Diverse Places}}: {{A Comparative Analysis}} of {{Distinctive National Discourses Surrounding}} the {{Maker Movement}} and {{Education}} in {{Four Countries}}}, - author = {Irie, Natalie Roote and Hsu, Yu-Chang and Ching, Yu-Hui}, - year = {2019}, - month = jul, - journal = {TechTrends}, - volume = {63}, - number = {4}, - pages = {397--407}, - issn = {8756-3894}, - doi = {10.1007/s11528-018-0355-9} -} - -@inproceedings{Irwin2014, - title = {The {{RepRap}} 3-{{D Printer Revolution}} in {{STEM Education}}}, - booktitle = {121st {{ASEE Annual Conference}} \& {{Exposition}}.}, - author = {Irwin, John L and Pearce, Joshua M. and {OppligerDouglas} and Anzalone, Gerald}, - year = {2014}, - address = {{Indianapolis, IN}}, - file = {/Users/fabio/Zotero/storage/DRYITUQ3/Irwin et al. - 2014 - The RepRap 3-D Printer Revolution in STEM Education.pdf} -} - -@article{irwinTransitionDesignProposal2015, - title = {Transition Design: {{A}} Proposal for a New Area of Design Practice, Study, and Research}, - author = {Irwin, Terry}, - year = {2015}, - journal = {Design and Culture}, - volume = {7}, - number = {2}, - pages = {229--246}, - publisher = {{Bloomsbury Publishing Plc.}}, - issn = {17547083}, - doi = {10.1080/17547075.2015.1051829}, - urldate = {2022-03-13}, - abstract = {Fundamental change at every level of our society, and new approaches to problem solving are needed to address twenty-first-century ``wicked problems'' such as climate change, loss of biodiversity, depletion of natural resources, and the widening gap between rich and poor. Transition Design is a proposition for a new area of design practice, study, and research that advocates design-led societal transition toward more sustainable futures. This reconception of entire lifestyles will involve reimagining infrastructures including energy resources, the economy and food, healthcare, and education. Transition Design focuses on the need for ``cosmopolitan localism,'' a lifestyle that is placebased and regional, yet global in its awareness and exchange of information and technology. Transition Designers would apply a deep understanding of the interconnectedness of social, economic, and natural systems and the Transition Design framework proposes four key areas in which narratives, knowledge, skills, and action can be developed.}, - keywords = {Cosmopolitan localism,Social innovation,Sustainable design,Transition design,Transition town movement} -} - -@article{isaacCrackInitiationGrowth2020, - title = {Crack Initiation and Growth in Additively Printed {{ABS}}: {{Effect}} of Print Architecture Studied Using Dic}, - author = {Isaac, John P. and Dondeti, Sivareddy and Tippur, Hareesh V.}, - year = {2020}, - month = aug, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101536}, - publisher = {{Elsevier BV}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101536}, - urldate = {2020-10-05} -} - -@article{Isaksson2019, - title = {Creating a Sense of Urgency for Sustainable Development \textendash{} {{Testing}} Two System Models}, - author = {Isaksson, Raine}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {227}, - pages = {1173--1184}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.177}, - urldate = {2020-05-21}, - abstract = {In spite of good coverage of sustainability and sustainable development both in scientific journals and other publications, humanity is on a steady unsustainable track consuming more than is produced. Understanding of change needs, does not seem to convert into sufficient change action. Sustainability issues are often complex, interdependent and hard to comprehend, indicating that sustainable development, in addition to change willingness, requires a holistic perspective. Seeing and understanding systems - systems thinking - is important. This implies that sense-making of systems and of sustainable development is important as a prerequisite for change. Possibilities of realising synergies between quality management and sustainable development are often discussed but do often not seem to be fully realised. This paper tests two system models from Quality Management in the context of sustainability in cement manufacturing and building material production. The indicative results suggest that the proposed system models are able to describe and identify improvement opportunities that could be used to create interest for change.} -} - -@article{ishfaqOpportunitiesChallengesAdditive2021, - title = {Opportunities and Challenges in Additive Manufacturing Used in Space Sector:A Comprehensive Review}, - author = {Ishfaq, Kashif and Asad, Muhammad and Mahmood, Muhammad Arif and Abdullah, Mirza and Pruncu, Catalin Iulian}, - year = {2021}, - journal = {Rapid Prototyping Journal}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-04-2021-0091}, - urldate = {2021-10-18}, - abstract = {Purpose: The purpose of this study is to compile the successful implementation of three-dimensional (3D) printing in the space for the manufacturing of complex parts. 3D printing is an additive manufacturing (AM) technique that uses metallic powder, ceramic, or polymers to build simple/complex parts. The parts produced possess good strength, low weight, excellent mechanical properties and are cost-effective. This saves a considerable amount of both time and carrying cost. Thereof the challenges and opportunities that the space sector holds for AM is worth reviewing to provide a better insight into further developments and prospects for this technology. Design/methodology/approach: The potentiality of 3D printing for the manufacturing of various components under space conditions has been explained. Here, the authors have reviewed the details of manufactured parts used for zero gravity missions, subjected to onboard International Space Station conditions and with those manufactured on earth. Followed by the major opportunities in 3D printing in space which include component repair, material characterization, process improvement and process development along with the new designs. The challenges such as space conditions, availability of power in space, the infrastructure requirements and the quality control or testing of the items that are being built in space are explained along with their possible mitigation strategies. Findings: These components are well comparable with those prepared on earth which enables a massive cost saving. Other than the onboard manufacturing process, numerous other components and a complete robot/satellite for outer space applications were manufactured by AM. Moreover, these components can be recycled on board to produce feedstock for the next materials. The parts produced in space are bought back and compared with those built on earth. There is a difference in their nature i.e. the flight specimen showed a brittle nature and the ground specimen showed a denser nature. Originality/value: The review discusses the advancements of 3D printing in space and provides numerous examples of the applications of 3D printing in space and space applications. The paper is solely dedicated to 3D printing in space. It provides a breakthrough in the literature as a limited amount of literature is available on this topic. The paper aims at highlighting all the challenges that AM faces in the space sector and also the future opportunities that await development.}, - keywords = {3D printing,Additive manufacturing,Implementation barriers,NASA,Spacecraft,Sustainability} -} - -@article{Islam2019, - title = {E-Waste in {{Australia}}: {{Generation}} Estimation and Untapped Material Recovery and Revenue Potential}, - author = {Islam, Md Tasbirul and Huda, Nazmul}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117787}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117787}, - urldate = {2020-05-21}, - abstract = {This study presents an estimation of electrical and electronic equipment (EEE) products put-on-market (PoM), electronic-waste (e-waste) generation and the stock of EEE products in Australia from the year 2000\textendash 2047, considering seven categories that encompass 51 different types of product. Holt's double-exponential smoothing and dynamic lifespans (using the Weibull distribution function) are applied to compute past and future PoM and in e-waste generation, respectively. With the estimation, it is found that EEE PoM was increased from 470 kilo tons (kt) to 2135 kt in a timeframe of 2000\textendash 2015. On the other hand, e-waste generation was 115 kt in the year 2000, which then increased to 485 kt in the year 2010. For the projected period (2018\textendash 2047), the annual average growth of e-waste generation will be around 3\%. E-waste generation will increase, particularly for large household appliances (LHA), small household appliances (SHA) and consumer equipment (CE), in terms of weight. This study evaluates the potentially recoverable material and revenue potential of regulated products (e.g., computer, televisions and other IT peripherals currently considered under the national television and computer recycling scheme (NTCRS) and mobile phones) and e-waste generated outside of the current product coverage. The gap between revenue generation from regulated and non-regulated products is quantitatively assessed for the first time and reported in this paper. Sensitivity and uncertainty analysis performed by Monte Carlo simulation showed the robustness and accuracy of this study. This quantification will provide invaluable insights to policymakers, including products in future legislative reform as well as the development of the recycling industry in Australia. Furthermore, this study presents a transparent process of calculation for time-series data that can be used for e-waste generation estimation for other countries, as well.}, - keywords = {Australia,Circular economy,Estimation and generation,Material,NTCRS,Revenue,Waste electrical and electronic equipment (WEEE)} -} - -@article{Islam2020, - title = {Here There Be Dragons, a Pre-Roadmap Construct for {{IoT}} Service Infrastructure}, - author = {Islam, Nazrul and Marinakis, Yorgos and Majadillas, Mary Anne and Fink, Matthias and Walsh, Steven T.}, - year = {2020}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {155}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2017.09.016}, - urldate = {2020-05-21}, - abstract = {The major challenges facing the 21st century world demands disruptive technology based solutions. One of the most promising exponential technology set to address world challenges is the Internet of Things (IoT) based Trillion Sensor System (TSS). The IoT supports many revolutionary commercial and societal solutions including wearable or unobtrusive medical sensors, Industry 4.0, power and water grids, smart cities, food production, education, transportation and roadway infrastructure needs. However, to support these solutions the current IoT infrastructure needs improved spectrum and the use of between one to ten Trillion Sensors (TS). The development of a robust IoT based TSS infrastructure would create an addition to world GDP equal to that of the U.S. GDP to double the worlds GDP. This new IoT based TSS would create a high paying job base that will form a new vibrant world middle class and an abundant economy. Yet while much is written about the ability of the IoT to transform society little effort is focused on its infrastructure. If this is true there is cause for concern. We add to the literature by developing a precursor road mapping construct which focuses on the service sector and supports 3rd generation road mapping techniques. We utilize the emerging IoT TSS technology base as our case study. We utilize the best thoughts of hundreds of experts from three organizations focused on accelerating IoT TSS road mapping efforts.}, - keywords = {Abundance,Additive manufacturing,Global finance,Service based technology road-mapping,Technology entrepreneurship,Trillion sensor systems} -} - -@misc{ISO261, - title = {{{ISO}} - {{Technical}} Committees - {{ISO}}/{{TC}} 261 - {{Additive}} Manufacturing}, - author = {261, ISO/TC}, - howpublished = {http://www.iso.org/iso/standards\_development/technical\_committees/other\_bodies/iso\_technical\_committee.htm?commid=629086} -} - -@article{issifuHowCOVID19Could2021, - title = {How {{COVID-19 Could Change}} the {{Economics}} of the {{Plastic Recycling Sector}}}, - author = {Issifu, Ibrahim and Deffor, Eric Worlanyo and Sumaila, Ussif Rashid}, - year = {2021}, - month = sep, - journal = {Recycling 2021, Vol. 6, Page 64}, - volume = {6}, - number = {4}, - pages = {64}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - doi = {10.3390/RECYCLING6040064}, - urldate = {2021-09-27}, - abstract = {The price of oil has a great influence on prices of recycled plastics and, therefore, plastic recycling efforts. Here, we analyze the effects of the ongoing COVID-19 pandemic on crude oil price and how this, in turn, is likely to affect the degree of plastic recycling that takes place. Impulse response functions and variance decompositions, calculated from the structural vector autoregression, suggest that changes in crude oil prices are key drivers of the price of recycled plastics. The findings highlight that because plastics are made from the by-products of oil, falling oil prices increase the cost of recycling. Therefore, the price of recycled plastics should be supported using taxes while encouraging sustained behavioral changes among consumers and producers to selectively collect and recycle personal protective equipment so that they do not clog our landfills or end up in our water bodies as plastic waste.}, - keywords = {crude oil,impulse response functions,plastic recycling}, - file = {/Users/fabio/Zotero/storage/N6B2GFXJ/full-text.pdf} -} - -@article{Ivanova2011, - title = {Additive {{Manufacturing}} ({{AM}}) and {{Nanotechnology}}: {{Promises}} and {{Challenges}}}, - author = {Ivanova, Os and Williams, Cb and Campbell, Ta}, - year = {2011}, - journal = {\ldots{} An Additive Manufacturing \ldots}, - volume = {19}, - number = {5}, - pages = {353--364}, - issn = {1355-2546}, - doi = {10.1108/RPJ-12-2011-0127}, - abstract = {Purpose \textendash{} This paper aims to provide a review of available published literature in which nanostructures are incorporated into AM printing media as an attempt to improve the properties of the final printed part. The purpose of this article is to summarize the research done to date, to highlight successes in the field, and to identify opportunities that the union of AM and nanotechnology could bring to science and technology. Design/methodology/approach \textendash{} Research in which metal, ceramic, and carbon nanomaterials have been incorporated into AM technologies such as stereolithography, laser sintering, fused filament fabrication, and three-dimensional printing is presented. The results of the addition of nanomaterials into these AM processes are reviewed. Findings \textendash{} The addition of nanostructured materials into the printing media for additive manufacturing affects significantly the properties of the final parts. Challenges in the application of nanomaterials to additive manufacturing are nevertheless numerous. Research limitations/implications \textendash{} Each of the AM methods described in this review has its own inherent limitations when nanoparticles are applied with the respective printing media. Overcoming these design boundaries may require the development of new instrumentation for successful AM with nanomaterials. Originality/value \textendash{} This review shows that there are many opportunities in the marriage of AM and nanotechnology. Promising results have been published in the application of nanomaterials and AM, yet significant work remains to fully harness their inherent potential. This paper serves the purpose to researchers to explore new nanomaterials-based composites for additive manufacturing.}, - isbn = {1355-2546}, - keywords = {3d printing,additive manufacturing,additives,nanocomposite,nanotechnology,paper type literature review,printing industry}, - file = {/Users/fabio/Zotero/storage/BG3C8Q9X/m-api-6d060b58-703d-40a5-1c61-37f3e22075c3.pdf} -} - -@article{Iyer2008, - title = {Microstructural {{Characterization}} and {{Mechanical Properties}} of {{Si}} 3 {{N}} 4 {{Formed}} by {{Fused Deposition}} of {{Ceramics}}}, - author = {Iyer, S. and McIntosh, J. and Bandyopadhyay, A. and Langrana, N. and Safari, A. and Danforth, S. C. and Clancy, R. B. and Gasdaska, C. and Whalen, P. J.}, - year = {2008}, - month = mar, - journal = {International Journal of Applied Ceramic Technology}, - volume = {5}, - number = {2}, - pages = {127--137}, - issn = {1546-542X}, - doi = {10.1111/j.1744-7402.2008.02193.x}, - urldate = {2015-03-17}, - file = {/Users/fabio/Zotero/storage/3963MQS5/Iyer et al. - 2008 - Microstructural Characterization and Mechanical Properties of Si 3 N 4 Formed by Fused Deposition of Ceramics.pdf} -} - -@misc{j.PrototypingStrategiesLiterature, - title = {Prototyping {{Strategies}}: {{Literature Review}} and {{Identification}} of {{Critical Variables}}}, - author = {J., Christie E. and D., Jensen D. and T., Buckley R. and A., Menefee D. and K., Ziegler K. and L., Wood K. and H., Crawford R.}, - pages = {25.1091}, - urldate = {2021-02-16} -} - -@article{Jaafarnia2021, - title = {The {{Redesign Decision-Making Cycle}}: {{A}} Perspective on Predicting Prosumer Household {{3D}} Printer Waste}, - author = {Jaafarnia, Mohsen and Shende, Avinash and Boroomand, Sahar}, - year = {2021}, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {1349--1356}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.03.012}, - urldate = {2021-04-20}, - abstract = {3D printer manufacturers have been focussing on maintaining their market position considering the ever-changing demands for new product designs. The recent boom in the household 3D-printer market raises the question of whether it is a good idea to produce large numbers of household 3D-printers, considering that the satisfaction with the visuals printed by 3D-printers will not remain stable. Changing desires leads prosumers to revise their printed forms, frequently making another design to overcome dissatisfaction. Quick disposal of these successive printed forms creates a significant amount of waste. It was hypothesised that it is not possible to meet the sustainable waste management goals with the increase in household-level 3D-printers. Therefore, the use of 3D-printers is likely to be unsustainable because of this expected substantial increase in waste. This study conducted a literature review to provide a perspective on this phenomenon. The novel contribution of this perspective will help estimate the amount of waste generated. It was concluded that 3D-printers, although help in meeting the everyday desires of prosumers, do not meet the requirements of a sustainable society.}, - keywords = {Erratic desires,Household 3D printer waste,Individual freedom,Prosumer}, - file = {/Users/fabio/Zotero/storage/36HMF8MH/full-text.pdf} -} - -@article{Jaamaa2022, - title = {The First Mile Problem in the Circular Economy Supply Chains \textendash{} {{Collecting}} Recyclable Textiles from Consumers}, - author = {J{\"a}{\"a}maa, Lauri and Kaipia, Riikka}, - year = {2022}, - month = mar, - journal = {Waste Management}, - volume = {141}, - pages = {173--182}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2022.01.012}, - urldate = {2022-02-09} -} - -@article{Jackson2020, - title = {Transformational Leadership and Gravitas: 2000 Years of No Development?}, - author = {Jackson, Chris J.}, - year = {2020}, - month = apr, - journal = {Personality and Individual Differences}, - volume = {156}, - pages = {109760}, - issn = {01918869}, - doi = {10.1016/j.paid.2019.109760} -} - -@article{Jacobi2022, - title = {Transdisciplinary Co-Creation Increases the Utilization of Knowledge from Sustainable Development Research}, - author = {Jacobi, J. and Llanque, A. and Mukhovi, S. M. and Birachi, E. and {von Groote}, P. and Eschen, R. and {Hilber-Sch{\"o}b}, I. and Kiba, D. I. and Frossard, E. and {Robledo-Abad}, C.}, - year = {2022}, - month = mar, - journal = {Environmental Science and Policy}, - volume = {129}, - pages = {107--115}, - publisher = {{Elsevier}}, - issn = {18736416}, - doi = {10.1016/j.envsci.2021.12.017}, - urldate = {2022-01-25}, - abstract = {Our study aimed at understanding the utilization of research knowledge generated in sustainable development research. Drawing on a sample of 54 recent research projects, we investigated how and by whom the knowledge was used, what changes were achieved, and how non-academic actors were involved. As a conceptual framework we combined a concept of ``stages of knowledge utilization'' with a spiral model that co-creates three forms of knowledge \textendash{} systems knowledge, target knowledge, and transformation knowledge, and which spans from joint problem definition to concrete sustainability transformations. We analysed questionnaires from 94 academic and non-academic actors using cross-tabulation, chi-squared tests, and qualitative content analysis. The early involvement of non-academic actors from key groups such as local enterprises was positively related to the utilization of research knowledge, as was their involvement in diverse roles. However, only little of the research knowledge generated has so far resulted in changes in policy and practice, partly because sustainability transformations are larger societal processes. Utilization of research knowledge for sustainability transformations cannot be achieved without employing a transdisciplinary approach that brings together academic and non-academic actors in a setting that enables discussions on an even footing and the empowering of actors who are often not heard. In such settings, researchers are also part of the change rather than mere observers, an additional factor that came up in our participatory results validation activities and that requires further research. For more influence on policies and practice, research for development requires active participation of non-academic actors from the outset, when the project contents are defined.}, - keywords = {Co-creation,Knowledge utilization,Sustainability,Transdisciplinarity,Transformation} -} - -@book{Jacobs1992a, - title = {Rapid {{Prototyping}} \& {{Manufacturing}}: {{Fundamentals}} of {{Stereolithography}}}, - author = {Jacobs, Paul Francis}, - year = {1992}, - urldate = {2013-10-08}, - abstract = {This turnkey technology source provides an introduction to rapid prototyping and manufacturing (RP\&M) with an emphasis on stereolithography which represents the majority of all rapid prototyping systems currently in place. The content is based on theory, analysis and experiment with extensive test data, including select case studies from the automotive, simultaneous engineering, and medical sectors.}, - isbn = {0-87263-425-6} -} - -@article{Jacobs2018, - title = {The Means Determine the End \textendash{} {{Pursuing}} Integrated Valuation in Practice}, - author = {Jacobs, Sander and {Mart{\'i}n-L{\'o}pez}, Berta and Barton, David N. and Dunford, Robert and Harrison, Paula A. and Kelemen, Eszter and Saarikoski, Heli and Termansen, Mette and {Garc{\'i}a-Llorente}, Marina and {G{\'o}mez-Baggethun}, Erik and Kopperoinen, Leena and Luque, Sandra and Palomo, Ignacio and Priess, Joerg A. and Rusch, Graciela M. and Tenerelli, Patrizia and Turkelboom, Francis and Demeyer, Rolinde and Hauck, Jennifer and Keune, Hans and Smith, Ron}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {515--528}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.07.011}, - abstract = {In environmental valuation, although it is well recognised that the choice of method heavily affects the outcome, little is known on how existing valuation methods actually elicit the different values. Through the assessment of real-life applications of valuation of nature, this study tracks down the suitability of 21 valuation methods for 11 value types and assesses the methodological requirements for their operationalization. We found that different valuation methods have different suitabilities to elicit diverse value-types. Some methods are more specialized than others, but every method has blind spots, which implies risks of biased decision-making. We summarized different value-types according to three value dimensions: non-anthropocentric, relational and instrumental. No single valuation method is able to capture this full spectrum of values of nature. Covering all value dimensions requires careful selection of complementary valuation methods. This study also demonstrates that performing such an integrated valuation does not necessarily entail more resources, as for every value dimension, methods with low to medium operational requirements are available. With this study, we aim to provide guidance for selecting a complementary set of valuation methods in order to develop integrated valuation in practice that includes values of all stakeholders into environmental decision-making.}, - keywords = {Ecosystem services,Integrated valuation,Operational requirements,Valuation methods,Values of nature}, - file = {/Users/fabio/Zotero/storage/8XEZUZVC/The-means-determine-the-end---Pursuing-integrated-valuat_2018_Ecosystem-Serv.pdf} -} - -@article{Jaeger-Erben2015, - title = {Sustainable Consumption through Social Innovation: A Typology of Innovations for Sustainable Consumption Practices}, - author = {{Jaeger-Erben}, Melanie and {R{\"u}ckert-John}, Jana and Sch{\"a}fer, Martina}, - year = {2015}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {108}, - pages = {784--798}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2015.07.042} -} - -@article{jaeger-erbenThereNoSustainable2021, - title = {There Is No Sustainable Circular Economy without a Circular Society}, - author = {{Jaeger-Erben}, Melanie and Jensen, Charlotte and Hofmann, Florian and Zwiers, Jakob}, - year = {2021}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {168}, - pages = {105476}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105476}, - urldate = {2021-02-13} -} - -@article{jaeger-erbenWhyUsersNot2021, - title = {Why Do Users (Not) Repair Their Devices? {{A}} Study of the Predictors of Repair Practices}, - author = {{Jaeger-Erben}, Melanie and Frick, Vivian and Hipp, Tamina}, - year = {2021}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {286}, - pages = {125382}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125382}, - urldate = {2020-12-21} -} - -@article{Jafari2000, - title = {A Novel System for Fused Deposition of Advanced Multiple Ceramics}, - author = {Jafari, M.A. and Han, W. and Mohammadi, F. and Safari, A. and Danforth, S.C. and Langrana, N.}, - year = {2000}, - month = sep, - journal = {Rapid Prototyping Journal}, - volume = {6}, - number = {3}, - pages = {161--175}, - issn = {1355-2546}, - doi = {10.1108/13552540010337047}, - urldate = {2015-03-17} -} - -@article{jagerCollaborationsCircularFood2020, - title = {Collaborations for Circular Food Packaging: {{The}} Set-up and Partner Selection Process}, - author = {J{\"a}ger, Joana Kleine and Piscicelli, Laura}, - year = {2020}, - month = dec, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.12.025}, - urldate = {2020-12-21}, - file = {/Users/fabio/Zotero/storage/GFMXGJ5G/full-text.pdf} -} - -@article{Jahani2019, - title = {Iranian Experiences in Terms of Consumption of Disposable Single- Use Plastics: {{Introduction}} to Theoretical Variables for Developing Environmental Health Promotion Efforts}, - author = {Jahani, Akram and Dehdari, Tahereh and Farzadkia, Mahdi and Mansourian, Morteza}, - year = {2019}, - month = jan, - journal = {Environmental Toxicology and Pharmacology}, - volume = {65}, - pages = {18--22}, - issn = {13826689}, - doi = {10.1016/j.etap.2018.11.004} -} - -@article{Jain2000, - title = {The Manufacturing Techniques of Various Drug Loaded Biodegradable Poly(Lactide-Co-Glycolide) ({{PLGA}}) Devices}, - author = {a Jain, Rajeev}, - year = {2000}, - month = dec, - journal = {Biomaterials}, - volume = {21}, - number = {23}, - eprint = {11055295}, - eprinttype = {pubmed}, - pages = {2475--2490}, - issn = {01429612}, - doi = {10.1016/S0142-9612(00)00115-0}, - urldate = {2014-09-12}, - abstract = {A considerable research has been conducted on drug delivery by biodegradable polymeric devices, following the entry of bioresorbable surgical sutures in the market about two decades ago. Amongst the different classes of biodegradable polymers, the thermoplastic aliphatic poly(esters) like poly(lactide) (PLA), poly(glycolide) (PGA), and especially the copolymer of lactide and glycolide, poly(lactide-co-glycolide) (PLGA) have generated immense interest due to their favorable properties such as good biocompatibility, biodegradability, and mechanical strength. Also, they are easy to formulate into different devices for carrying a variety of drug classes such as vaccines, peptides, proteins, and micromolecules. Also, they have been approved by the Food and Drug Administration (FDA) for drug delivery. This review discusses the various traditional and novel techniques (such as in situ microencapsulation) of preparing various drug loaded PLGA devices, with emphasis on preparing microparticles. Also, certain issues about other related biodegradable polyesters are discussed.}, - pmid = {11055295}, - keywords = {Biocompatible Materials,Biocompatible Materials: chemistry,Biodegradation,Drug Delivery Systems,Environmental,Lactic Acid,Lactic Acid: chemistry,Microspheres,Polyglycolic Acid,Polyglycolic Acid: chemistry,Polymers,Polymers: chemistry}, - file = {/Users/fabio/Zotero/storage/R54V2BUF/Jain - 2000 - The manufacturing techniques of various drug loaded biodegradable poly(lactide-co-glycolide) (PLGA) devices.pdf} -} - -@article{Jain2013, - title = {Feasibility {{Study}} of {{Manufacturing Using Rapid Prototyping}}: {{FDM Approach}}}, - author = {Jain, Pranjal and Kuthe, A.M.}, - year = {2013}, - month = jan, - journal = {Procedia Engineering}, - volume = {63}, - pages = {4--11}, - publisher = {{Elsevier B.V.}}, - issn = {18777058}, - doi = {10.1016/j.proeng.2013.08.275}, - urldate = {2014-01-24}, - file = {/Users/fabio/Zotero/storage/4TBG6HLS/Jain, Kuthe - 2013 - Feasibility Study of Manufacturing Using Rapid Prototyping FDM Approach.pdf} -} - -@inproceedings{jaisinghsheoranFusedDepositionModeling2020, - ids = {JaisinghSheoran2019}, - title = {Fused {{Deposition}} Modeling Process Parameters Optimization and Effect on Mechanical Properties and Part Quality: {{Review}} and Reflection on Present Research}, - booktitle = {Materials {{Today}}: {{Proceedings}}}, - author = {Jaisingh Sheoran, Ankita and Kumar, Harish}, - year = {2020}, - month = jan, - volume = {21}, - pages = {1659--1672}, - publisher = {{Elsevier Ltd}}, - issn = {22147853}, - doi = {10.1016/j.matpr.2019.11.296}, - urldate = {2021-01-15}, - abstract = {Additive manufacturing (AM) was developed initially as a technique for rapid prototyping, to visualize, test and authenticate a design, before end-user production of the design. In recent years, Additive Manufacturing (AM) technique Fused Deposition modeling (FDM), has developed to become a rapid manufacturing technique because of the ability to produce complex parts layer-by-layer in lesser production cycle time than as compared to conventional machining processes. FDM also offers the advantage of the lowest cost because of no tooling requirements. Despite these advantages, building parts by utilizing FDM for end-use is still a demanding endeavor. This is because FDM has multiple processing parameters, which affect the part quality, mechanical properties, build time and dimensional accuracy. These FDM processing parameters include air gap, build orientation, infill percentage, raster angle, layer thickness, etc. Depending upon the application, for which the part is manufactured, careful selection of these process parameters needs to be done. For a specific output requirement, some of the process parameters are significant than the rest, these significant process parameters need to be identified and optimized. Due to this, researchers have explored and utilized various experimental or statistical Design of Experiment (DOE) techniques for optimizing the FDM process parameters to improve the mechanical properties or part quality or both. Some of these DOE techniques include the Taguchi method, Genetic algorithm (GA), gray relational, Response surface method (RSM), fractional factorial, Artificial Neural networks (ANN), Fuzzy logic, ANOVA, etc. This article aims at reviewing the current research on the statistical and experimental design techniques for different applications or output responses such as enhancing mechanical properties, build time, part quality, etc.}, - keywords = {Additive Manufacturing (AM),Design of Experiments (DOE),Fused Deposition modeling (FDM),Mechanical properties,Optimization,Process parameters} -} - -@article{jakobActorsObjectivesContext2020, - title = {Actors, Objectives, Context: {{A}} Framework of the Political Economy of Energy and Climate Policy Applied to {{India}}, {{Indonesia}}, and {{Vietnam}}}, - author = {Jakob, Michael and Flachsland, Christian and Christoph Steckel, Jan and Urpelainen, Johannes}, - year = {2020}, - month = dec, - journal = {Energy Research and Social Science}, - volume = {70}, - publisher = {{Elsevier Ltd}}, - issn = {22146296}, - doi = {10.1016/j.erss.2020.101775}, - urldate = {2022-03-13}, - abstract = {Devising policies that facilitate a transition to low-carbon energy systems requires a close understanding of the country-specific political economy of energy and climate policy. We develop a generalized AOC (`Actors, Objectives, Context') political economy framework to inform and enable comparison of country-specific case studies of how economic structure, political institutions, and the political environment shape policy outcomes. Our actor-centered perspective is built on the assumption that those policies are implemented that best meet the objectives of actors with the greatest influence on policy decisions. Applying the framework in practice includes four basic steps: i) identifying the societal and political actors most relevant for the formulation, implementation and enforcement of energy and climate policies; ii) spelling out these actors' underlying objectives; iii) assessing the economic, institutional, discursive and environmental context which determines how certain objectives matter for certain societal actors; and iv) analyzing the dynamic interactions among these factors leading to aggregate policy outcomes. Context factors determine how societal actors influence political actors engaged in formal public policy formulation, implementation and enforcement, and how the dynamic interplay of different political actors' interests results in energy and climate policy outcomes. The framework can accommodate a wide range of theoretical perspectives. We illustrate how the framework enables conducting comparable energy and climate policy country case studies, using the example of coal use in India, Indonesia and Vietnam. Finally, we discuss how the framework can contribute to the identification of entry points that could bring about policy change.}, - keywords = {Climate and energy policy,Coal,Policy design,Political economy,Vested interests} -} - -@article{jakrawatanaReplacingSingleusePlastics2023, - title = {Replacing Single-Use Plastics with Biomaterial Packaging in {{Thailand}} and Impacts on the Water-Energy-Climate {{Nexus}}}, - author = {Jakrawatana, Napat and Ngammuangtueng, Pitak and Vorayos, Natanee and Gheewala, Shabbir H.}, - year = {2023}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {39}, - pages = {506--520}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.05.036}, - urldate = {2023-07-06}, - abstract = {Despite the potential benefits of biomaterial packaging in reducing plastic waste, evaluating its environmental impact at a regional or national level is imperative. This study evaluated options for replacing single-use plastics in Thailand with biomaterial packaging. We focused on plastic bags, foam food boxes, and plastic trays and cups, considering their volume of consumption and end-of-life management in 2020 as a base case. We examined the effects of this replacement on water scarcity, energy consumption, greenhouse gas (GHG) emissions throughout the life cycle, and the reduction of waste mismanagement. Based on our findings, the optimal approach to manufacturing biomaterials and managing their end-of-life phase could lower GHG emissions by 1980 kt CO2-eq per year, reduce landfill waste by 490 kt per year, and decrease mismanaged waste by 987 kt per year in comparison to the 2020 baseline (conventional plastics). However, to achieve this scenario, a remarkable amount of biomaterial is required. The demand for sugarcane as a feedstock for biomaterial production (15 million t/y) accounts for 20~\% of Thailand's total output or half of its sugar exports. However, the need for cassava as a feedstock for biomaterial production (1 million t/y) accounts for only 1~\% of the entire output or less than 10~\% of cassava exports. To enhance the productivity of biomass feedstocks, additional land and water resources will be necessary compared to the 2020 base case. This could result in a doubling of the water demand, which would exacerbate water scarcity compared to the 2020 base case. Using biomaterials in packaging can be an effective way to decrease plastic waste and its related environmental impacts. However, proper waste management should be prioritized. Policymakers should carefully consider the environmental impacts and resource security implications of bio-based packaging.}, - langid = {english}, - keywords = {Bioeconomy,Biomaterial,Circular economy,Greenhouse gas emission}, - file = {/Users/fabio/Zotero/storage/H7ZZM6B8/S2352550923001318.html} -} - -@inproceedings{Jaksic2016, - title = {Sustainable {{Undergraduate Engineering}} 3-{{D Printing Lab}}}, - booktitle = {2016 {{ASEE Annual Conference}} \& {{Exposition Proceedings}}}, - author = {Jaksic, Nebojsa}, - year = {2016}, - number = {1984}, - pages = {p.25992}, - publisher = {{ASEE Conferences}}, - issn = {2153-5965}, - doi = {10.18260/p.25992}, - isbn = {978-0-692-68565-5}, - file = {/Users/fabio/Zotero/storage/BB3C4DRI/sustainable undergraduate engineering 3-d printing lab.pdf} -} - -@article{jambeckPlasticWasteInputs2015, - title = {Plastic Waste Inputs from Land into the Ocean}, - author = {Jambeck, Jenna R. and Geyer, Roland and Wilcox, Chris and Siegler, Theodore R. and Perryman, Miriam and Andrady, Anthony and Narayan, Ramani and Law, Kara Lavender}, - year = {2015}, - month = feb, - journal = {Science}, - volume = {347}, - number = {6223}, - pages = {768--771}, - publisher = {{American Association for the Advancement of Science}}, - doi = {10.1126/science.1260352}, - urldate = {2022-09-20} -} - -@inproceedings{James2017, - title = {Opportunities and Challenges of Distributed Manufacturing for Humanitarian Response}, - booktitle = {{{GHTC}} 2017 - {{IEEE}} Glob. {{Humanit}}. {{Technol}}. {{Conf}}. {{Proc}}.}, - author = {James, Laura}, - year = {2017}, - month = dec, - volume = {2017-January}, - pages = {1--9}, - publisher = {{Institute of Electrical and Electronics Engineers Inc.}}, - doi = {10.1109/GHTC.2017.8239297}, - abstract = {Distributed manufacturing, where decentralized small, local sites are engaged in production, often supported by digital systems and networks, can be a powerful tool in humanitarian aid. Field Ready uses distributed manufacturing to produce essential non-food items locally where they are needed during humanitarian responses. Such supplies can be available to communities in need and to relief workers more quickly, more cheaply than alternatives, and provide appropriate solutions to problems, often engaging local people in designing and making necessary items, and supporting economic development. Scaling up this requires local production capabilities (skills, tools, and information such as designs), which can be boosted by adoption of these methods by aid agencies, international non-governmental organizations (INGOs) and others. Local manufacturing offers the potential for disaster affected communities to be engaged in recovery, and long term to become more resilient, with access to all the equipment and information required to make the supplies they need. However, there are challenges: appropriate quality control for distributed manufacture, unlocking the potential for in-region manufacturers to engage in humanitarian response, and uptake of digital knowledge sharing and collaboration to the humanitarian sector. In this paper, we share experiences of human-centred design and global collaboration to solve local problems, of manufacturing in remote and challenging locations, community building and bridging sectors through the Humanitarian Makers network, and new ideas for distributed manufacturing standards and quality.}, - isbn = {978-1-5090-6046-7}, - keywords = {collaboration,community,digital manufacturing,disaster relief,distributed manufacturing,making,open hardware,quality control,testing} -} - -@article{Janajreh2015, - title = {Mechanical Recycling of {{PVC}} Plastic Waste Streams from Cable Industry: {{A}} Case Study}, - author = {Janajreh, I. and Alshrah, M. and Zamzam, Samih}, - year = {2015}, - journal = {Sustainable Cities and Society}, - volume = {18}, - number = {2015}, - pages = {13--20}, - publisher = {{Elsevier B.V.}}, - issn = {22106707}, - doi = {10.1016/j.scs.2015.05.003}, - abstract = {Plastics draw a paramount amount of fossil fuel reaching nearly 300 million tons annually and continue to enter every production sector of our lives (automotive, aerospace, packaging, building, toys, furniture, clothing, medical etc.). While different from polyolefin, Poly Vinyl Chloride (PVC), along with many halogenated polymers, all belong to the same thermo-plastic group. Rigid plasticized PVC is commonly used in pipes, window framing, floor coverings, roofing sheets, and cables; thereby it is discarded at a high rate. Adopting an appropriate recycling pathway is of both an economic value and an environmental benefit. The high hydrogen chloride content and the concern of dioxins and furans emission deter its thermochemical conversion. Re-compounding, particularly, when it is generated at a substantial amount and at low variation in composition, is the ultimate recycling strategy. In this work, analysis of the composition of PVC waste stream from the cable industry is carried out. Thermal Gravimetric Analysis (TGA) was conducted to infer the moisture, volatile, and inorganic filler fractions and the extent of thermal stability. These data are important to design the proper re-compounding, extrusion and injection conditions for the postconsumer PVC. Standard tensile and dynamic stress samples were produced and subjected to successive aging, extrusion and molding. Thermal properties were insignificantly altered, whereas mechanical properties lost some but tolerable flexibility. The results suggesting that PVC cable polymer can be reutilized in a close sustainable manufacturing which warrants ecological and economic benefit.}, - keywords = {Dynamic test,PVC recycling,PVC tensile}, - file = {/Users/fabio/Zotero/storage/78YXPLN8/Mechanical recycling of PVC plastic waste streams from cable industry A case study.pdf} -} - -@article{janakiramanCreatingEnvironmentallyConscious2021, - title = {Creating Environmentally Conscious Engineering Professionals through Attitudinal Instruction: {{A}} Mixed Methods Study}, - author = {Janakiraman, Shamila and Watson, Sunnie Lee and Watson, William R and Cheng, Zui}, - year = {2021}, - doi = {10.1016/j.jclepro.2021.125957}, - urldate = {2021-02-12}, - abstract = {Environmental responsibilities have evolved beyond controlling the emissions and wastes of industrial production to now incorporating logistics, products and processes. Corporations have become environmentally conscious to satisfy corporate responsibilities and to ensure sustainable development, increasing the demand for environmental engineering professionals. Engineering education should not be restricted to satisfying the demands of employers, industry and the marketplace or be isolated within disciplines. This study examined the instructional strategies implemented by a professor in his environmental sustainability engineering course to make his students critical thinkers, who can create sustainable products, programs and solutions. This mixed methods single case study adopted a positive deviance approach to identify this best practices case where the professor applied attitudinal learning principles in a non-intrusive way, that is without trying to change attitudes directly and forcefully. This allowed students to critically examine presented content, connect emotionally to issues they valued, take ownership of their learning, and make decisions and take responsibility for their actions, according to this study. Since sustainability projects are multidisciplinary in the real world, ill-structured problem solving incorporated in semester-long team projects showed that students learned to work in diverse teams and understood team dynamics. These skills are expected to be transferred into students' future engineering professional careers where they could demonstrate broader management, multidisciplinary, and communication skills, in addition to social, economic and environmental responsibilities.}, - keywords = {Attitudes,Behavior,Engineering education,Environment sustainability,Professionals}, - file = {/Users/fabio/Zotero/storage/FD9D2MYH/full-text.pdf} -} - -@article{Jang2020, - title = {Recycling and Management Practices of Plastic Packaging Waste towards a Circular Economy in {{South Korea}}}, - author = {Jang, Yong Chul and Lee, Gain and Kwon, Yuree and hong Lim, Jin and hyun Jeong, Ji}, - year = {2020}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {158}, - pages = {104798}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104798}, - urldate = {2020-05-08}, - abstract = {Environmentally sound management of plastic packaging waste is an issue of concern around the world because it causes potential threats to oceans and the environment upon disposal and mismanagement. This study examines the current efforts on recycling of the waste by extended producer responsibility (EPR) in South Korea as well as other countries. Material flow analysis (MFA) was performed on plastic packaging by life cycle. Based on the results in this study, material footprint of common single use plastics (i.e., PET water bottles, plastic cups, plastic bags, and plastic containers and cutlery by food delivery) by consumption was estimated to be on average 11.8 kg or 638 disposable plastics per capita a year, resulting in 32.6 billion disposable plastics and 603,000 ton of waste for disposal in South Korea. Approximately, 3 million ton of plastic packaging waste from household waste streams in 2017 in South Korea was generated and treated by energy recovery with solid refuse fuels and heat recovery, incineration without energy recovery, material recycling, and landfilling. Material recycling and recovery rates of plastic packaging waste from households were relatively low at 13.5\% and 50.5\%, respectively. It was estimated that as much as 3.6 million ton of CO2eq was generated from 2.7 million ton of plastic waste by incineration in 2017. Approximately 6.6 million ton CO2eq could be avoided by material recycling. Challenges and efforts have been discussed to improve current recycling system of plastic packaging waste towards a circular economy.}, - keywords = {Circular economy,EPR,Greenhouse gas savings,Material flow,Plastic packaging waste} -} - -@article{Jankauskaite2008, - title = {Polyethylene Terephthalate Waste Recycling and Application Possibilities: {{A}} Review}, - author = {Jankauskaite, Virginija and Macijauskas, Gintaras and Lygaitis, Ramunas}, - year = {2008}, - journal = {Medziagotyra}, - volume = {14}, - number = {2}, - pages = {119--127}, - issn = {13921320}, - abstract = {A review of end of life of plastic}, - keywords = {Glycolysis,Physical and chemical reprocessing,Polyethylene terephthalate,Waste}, - file = {/Users/fabio/Zotero/storage/7E95NTVU/Jankauskaite, Macijauskas, Lygaitis - 2008 - Polyethylene terephthalate waste recycling and application possibilities A review.pdf} -} - -@article{Jasiuk2018, - title = {An {{Overview}} on {{Additive Manufacturing}} of {{Polymers}}}, - author = {Jasiuk, Iwona and Abueidda, Diab W. and Kozuch, Christopher and Pang, Siyuan and Su, Frances Y. and McKittrick, Joanna}, - year = {2018}, - month = mar, - journal = {JOM}, - volume = {70}, - number = {3}, - pages = {275--283}, - publisher = {{Springer US}}, - issn = {1047-4838}, - doi = {10.1007/s11837-017-2730-y}, - abstract = {\textcopyright{} 2018 The Minerals, Metals \& Materials Society We present an overview on additive manufacturing (AM), also called three-dimensional printing, with a focus on polymers. First, we introduce the AM concept. Next, we outline several AM processes, including their advantages and limitations, and list common polymers that are used in commercial printers. Then, we state various AM applications and present two examples. We conclude with a global view of the AM field, its challenges, and future directions.}, - file = {/Users/fabio/Zotero/storage/3AVWXVJ9/An Overview on Additive Manufacturing of Polymers.pdf} -} - -@article{JAWALE2018, - title = {Open {{Source 3D-printed}} Focussing Mechanism for Cellphone-Based Cellular Microscopy}, - author = {JAWALE, Y.K. and RAPOL, U. and ATHALE, C.A.}, - year = {2019}, - month = feb, - journal = {Journal of Microscopy}, - volume = {273}, - number = {2}, - pages = {105--114}, - issn = {00222720}, - doi = {10.1111/jmi.12765}, - file = {/Users/fabio/Zotero/storage/DTMP4EQQ/Open Source 3D-printed focussing mechanism for cellphone-based cellular microscopy.pdf} -} - -@article{Jax2018, - title = {Handling a Messy World: {{Lessons}} Learned When Trying to Make the Ecosystem Services Concept Operational}, - author = {Jax, Kurt and Furman, Eeva and Saarikoski, Heli and Barton, David N. and Delbaere, Ben and Dick, Jan and Duke, Guy and G{\"o}rg, Christoph and {G{\'o}mez-Baggethun}, Erik and Harrison, Paula A. and Maes, Joachim and {P{\'e}rez-Soba}, Marta and Saarela, Sanna Riikka and Turkelboom, Francis and {van Dijk}, Jiska and Watt, Allan D.}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {415--427}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.08.001}, - abstract = {The concept of ecosystem services is widely used in the scientific literature and increasingly also in policy and practice. Nevertheless, operationalising the concept, i.e. putting it into practice, is still a challenge. We describe the approach of the EU-project OpenNESS (Operationalisation of Ecosystem Services and Natural Capital), which was created in response to this challenge to critically evaluate the concept when applied to real world problems at different scales and in different policy sectors. General requirements for operationalization, the relevance of conceptual frameworks and lessons learnt from 27 case study applications are synthesized in a set of guiding principles. We also briefly describe some integrative tools as developed in OpenNESS which support the implementation of the principles. The guiding principles are grouped under three major headlines: ``Defining the problem and opening up the problem space'', ``Considering ethical issues'' and ``Assessing alternative methods, tools and actions''. Real world problems are often ``wicked'' problems, which at first are seldom clear-cut and well-defined, but often rather complex and subject to differing interpretations and interests. We take account of that complexity and emphasise that there is not one simple and straightforward way to approach real world problems involving ecosystem services. The principles and tools presented are meant to provide some guidance for tackling this complexity by means of a transdisciplinary methodology that facilitates the operationalisation of the ecosystem services concept.}, - keywords = {Conceptual frameworks,Ecosystem services,Guiding principles,Integrative tools,OpenNESS project}, - file = {/Users/fabio/Zotero/storage/7XGHL8AR/Handling-a-messy-world--Lessons-learned-when-trying-to-make-_2018_Ecosystem-.pdf} -} - -@article{jaxAnalysisEcosystemServices2013, - title = {Analysis {{Ecosystem}} Services and Ethics}, - author = {Jax, Kurt and Barton, David N and Chan, Kai M A and De Groot, Rudolf and Doyle, Ulrike and Eser, Uta and G{\"o}rg, Christoph and {G{\'o}mez-Baggethun}, Erik and Griewald, Yuliana and Haber, Wolfgang and {Haines-Young}, Roy and Heink, Ulrich and Jahn, Thomas and Joosten, Hans and Kerschbaumer, Lilin and Korn, Horst and Luck, Gary W and Matzdorf, Bettina and Muraca, Barbara and Ne{\ss}h{\"o}ver, Carsten and Norton, Bryan and Ott, Konrad and Potschin, Marion and Rauschmayer, Felix and Von Haaren, Christina and Wichmann, Sabine}, - year = {2013}, - doi = {10.1016/j.ecolecon.2013.06.008}, - urldate = {2021-08-29}, - abstract = {A major strength of the ecosystem services (ESS) concept is that it allows a succinct description of how human well-being depends on nature, showing that the neglect of such dependencies has negative consequences on human well-being and the economy. As ESS refer to human needs and interests, values are to be considered when dealing with the concept in practice. As a result we argue that in using the concept there is a need to be clear about what different dimensions of value are involved, and be aware of ethical issues that might be associated with the concept. A systematic analysis of the ethical implications associated to the ESS concept is still lacking. We address this deficiency by scrutinising value dimensions associated with the concept, and use this to explore the associated ethical implications. We then highlight how improved transparency in the use of the ESS concept can contribute to using its strengths without succumbing to possible drawbacks arising from ethical problems. These problems concern the dangers that some uses of the concept have in obscuring certain types of value, and in masking unevenness in the distribution of costs and benefits that can arise in the management of ESS.}, - keywords = {Biodiversity,Ecosystem services,Environmental policies,Ethics,Nature conservation,Values}, - file = {/Users/fabio/Zotero/storage/H9FZNSUP/full-text.pdf} -} - -@article{Jayabalan2021, - title = {Reshaping Higher Educational Institutions through Frugal Open Innovation}, - author = {Jayabalan, Jayamalathi and Dorasamy, Magiswary and Raman, Murali}, - year = {2021}, - month = jun, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {7}, - number = {2}, - pages = {145}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {21998531}, - doi = {10.3390/joitmc7020145}, - urldate = {2021-06-10}, - abstract = {Many private higher educational institutions (PHEI) are facing poor profitability, increased short term debts with under-resourced cash flow and insufficient funds that could lead to financial distress. To address the issues of ever-changing business environments and to deliver value propositions, PHEI should focus on their intangible assets to increase their capabilities to achieve frugal open innovation. The objective of this paper is to investigate the challenges faced by private universities from the practitioners' points of view and offer a practical solution. This paper also attempts to identify whether there is a need for any changes in business model or operations required by private universities to sustain their competitive advantage in the current environment. This study is exploratory in nature due to scarcity of past literature on frugal open innovation in PHEI context. Interviews were conducted with experienced practitioners to elicit their experience managing challenges in PHEI. As a result, this paper sheds light on the ability of PHEI to formalize, capture, and leverage its intangible assets rather than only investing and managing tangible assets in order to achieve frugal open innovation. Frugal open innovation is the enabler for PHEI to focus on core functions, create closer integration with industry, local and international communities and promote greater efficiency in operations. This paper is novel because it seeks to contribute to the current debate in the literature, positioning frugal open innovation (FOI) within the sphere of intellectual capital research, through exploring the effect of intellectual capital on frugal innovation is mediated through the information technology capability. The result indicates that sales and operating planning (S\&OP) can be panacea for the five main challenges faced by PHEI includes structural challenges, operational challenges, financial challenges, social challenges and technological challenges. We conclude that there is a role for intellectual capital to achieve FOI by influencing IT capabilities, thus warrants more research to fill this research gap.}, - keywords = {Frugal open innovation,Higher education institution,Intellectual capital,IT capabilities,Open innovation dynamics}, - file = {/Users/fabio/Zotero/storage/7NRXTCXP/full-text.pdf} -} - -@article{jblockSevenPrinciplesEffective2018, - title = {Seven Principles of Effective Replication Studies: Strengthening the Evidence Base of Management Research}, - author = {J Block, A Kuckertz}, - year = {2018}, - month = nov, - journal = {Manag Rev Q}, - volume = {68}, - number = {4}, - pages = {355--359}, - publisher = {{Springer Verlag}}, - doi = {10.1007/s11301-018-0149-3}, - urldate = {2021-07-15}, - file = {/Users/fabio/Zotero/storage/AY84J89P/full-text.pdf} -} - -@article{jeffordsRelationshipConstitutionalEnvironmental2021, - title = {On the Relationship between Constitutional Environmental Human Rights and Sustainable Development Outcomes}, - author = {Jeffords, Chris}, - year = {2021}, - month = aug, - journal = {Ecological Economics}, - volume = {186}, - pages = {107049}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107049}, - urldate = {2021-04-30} -} - -@article{Jekria2016, - title = {Environmental {{Concern}} and {{Recycling Behaviour}}}, - author = {Jekria, Nurliyana and Daud, Salina}, - year = {2016}, - journal = {Procedia Economics and Finance}, - volume = {35}, - number = {October 2015}, - pages = {667--673}, - publisher = {{Elsevier B.V.}}, - issn = {22125671}, - doi = {10.1016/S2212-5671(16)00082-4}, - abstract = {This study was carried out to determine recycling behaviour among 143 householders in Selangor. Data were analysed using the Structural Equation Modelling technique. Analysis shows that environmental concern is important towards attitude, and attitude helps to enhance the environmental concern to improve recycling behaviour. This study may help the understanding among householders of their attitude towards recycling. The findings will help the authority to address the issue.}, - keywords = {attitude,environmental concern,recycling behaviour}, - file = {/Users/fabio/Zotero/storage/NCAUJRN6/Environmental Concern and Recycling Behaviour.pdf} -} - -@article{Jelis2015, - title = {Metallurgical and {{Mechanical Evaluation}} of 4340 {{Steel Produced}} by {{Direct Metal Laser Sintering}}}, - author = {Jelis, Elias and Clemente, Matthew and Kerwien, Stacey and Ravindra, Nuggehalli M and Hespos, Michael R}, - year = {2015}, - month = mar, - journal = {JOM}, - volume = {67}, - number = {3}, - pages = {582--589}, - issn = {1047-4838}, - doi = {10.1007/s11837-014-1273-8}, - file = {/Users/fabio/Zotero/storage/RYJKRTTD/Metallurgical and Mechanical Evaluation of 4340 Steel Produced by Direct Metal Laser Sintering.pdf} -} - -@article{jemghiliBibliometricIndicatorsAnalysis2021, - title = {A Bibliometric Indicators Analysis of Additive Manufacturing Research Trends from 2010 to 2020}, - author = {Jemghili, Rajae and Ait Taleb, Abdelmajid and Khalifa, Mansouri}, - year = {2021}, - month = aug, - journal = {Rapid Prototyping Journal}, - volume = {27}, - number = {7}, - pages = {1432--1454}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-11-2020-0274}, - urldate = {2021-08-23}, - abstract = {Although many researchers have widely studied additive manufacturing (AM) as one of the most important industrial revolutions, few have presented a bibliometric analysis of the published studies in this area. This paper aims to evaluate AM research trends based on 4607 publications most cited from year 2010 to 2020.,The research methodology is bibliometric indicators and network analysis, including analysis based on keywords, citation analysis, productive journal, related published papers and authors indicators. Two free available software were employed VOSviewer and Bibexcel.,Keywords analysis results indicate that among the AM processes, Selective Laser Melting and Fused Deposition Modeling techniques, are the two processes ranked on top of the techniques employed and studied with 35.76\% and 20.09\% respectively. The citation analysis by VOSviewer software, reveals that the medical applications field and the fabrication of metal parts are the areas that interest researchers greatly. Different new research niches, as pharmaceutical industry, digital construction and food fabrication are growing topics in AM scientific works. This study reveals that journals ``Materials \& design'', ``Advanced materials'', ``Acs applied materials \& interfaces'', ``Additive manufacturing'', ``Advanced functional materials'' and ``Biofabrication'' are the most productive and influential in AM scientific research.,The results and conclusions of this work can be used as indicators of trends in AM research and/or as prospects for future studies in this area.}, - keywords = {3D printing,Additive manufacturing,Bibexcel,Bibliometric study,VOSviewer} -} - -@inproceedings{Jensen2018, - title = {{{PROTOTYPING IN MECHATRONIC PRODUCT DEVELOPMENT}}: {{HOW PROTOTYPE FIDELITY LEVELS AFFECT USER DESIGN INPUT}}}, - booktitle = {Proceedings of {{International Design Conference}}, {{DESIGN}}}, - author = {Jensen, Lasse Skovgaard and Nissen, Laus and Bilde, Nicklas and {\"O}zkil, Ali G{\"u}rcan}, - year = {2018}, - volume = {3}, - pages = {1173--1184}, - issn = {18479073}, - doi = {10.21278/idc.2018.0415}, - abstract = {This paper provides a study of prototyping; with the aim of understanding how the fidelity of prototypes affects inputs by users. During development of a mechatronic padlock, 4 physical prototypes at varying fidelity were fabricated. 66 interviews with users were conducted. Users were presented with 1 of the 4 prototypes. The study finds; fidelity of prototypes affects users' feedback. Though not linearly and without unambiguity. This underlining the complexity of prototyping. A better understanding of how prototypes are perceived can help designers in establishing prototyping strategies.}, - isbn = {978-953-7738-59-4}, - keywords = {Engineering design,Product design,Prototyping,Prototyping strategies}, - file = {/Users/fabio/Zotero/storage/T2RZ2R9Z/PROTOTYPING IN MECHATRONIC PRODUCT DEVELOPMENT HOW PROTOTYPE FIDELITY LEVELS AFFECT USER DESIGN INPUT.pdf} -} - -@article{jensenBarriersProductLongevity2021, - title = {Barriers to Product Longevity: {{A}} Review of Business, Product Development and User Perspectives}, - author = {Jensen, Peter Byrial and Laursen, Linda Nhu and Haase, Louise M{\o}ller}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {313}, - pages = {127951}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127951}, - urldate = {2021-06-21} -} - -@article{Jeppesen2021, - title = {Reprint of: {{Social}} Movements and Free Innovation}, - author = {Jeppesen, Lars Bo}, - year = {2021}, - month = jun, - journal = {Research Policy}, - pages = {104288}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104288}, - urldate = {2021-06-10}, - file = {/Users/fabio/Zotero/storage/DWX2HR3G/full-text.pdf} -} - -@article{jeppesenSocialMovementsFree2021, - title = {Social Movements and Free Innovation}, - author = {Jeppesen, Lars Bo}, - year = {2021}, - month = jul, - journal = {Research Policy}, - volume = {50}, - number = {6}, - pages = {104238}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104238}, - urldate = {2021-04-29}, - abstract = {In this article, I explore innovation and diffusion from social movements as part of the phenomenon of free innovation in households. The article contributes to the literature on household innovation by illustrating how social movement motivations may differ from motivations examined in prior studies focused on self-rewards, as well as examining the implications for free innovations and diffusion patterns in this setting. Social movement innovators are typically motivated by a common cause (such as a quest for a new life order and societal change) and create innovations that address a cause and ``system change'' rather than individual goals. I identify and define three types of social movement innovation: behavioral, product, and symbolic innovation. The common-cause motivation also creates a new form of diffusion problem that can only be solved through the spread and consumption of new products, behaviors, or techniques by a sufficiently large crowd. Common-cause motivations should thus encourage innovation diffusion, thereby reducing the risk of the diffusion-failure problem usually observed in household innovation research.}, - keywords = {Behavioral innovation,Common-cause motivations,Diffusion,Product innovation,Social movements,Symbolic innovation}, - file = {/Users/fabio/Zotero/storage/TFFH8Y2D/full-text.pdf} -} - -@article{jeromeMappingTestingCircular2022, - title = {Mapping and Testing Circular Economy Product-Level Indicators: {{A}} Critical Review}, - author = {Jerome, Adeline and Helander, Harald and Ljunggren, Maria and Janssen, Matty}, - year = {2022}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {178}, - pages = {106080}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106080}, - urldate = {2021-11-30} -} - -@book{Jezierski2014, - title = {Labcraft: {{How}} Social Labs Cultivate Change through Innovation and Collaboration}, - author = {Jezierski, E and Harvey, J and Hansen, L and Takeuchi, M and Sinha, R and Kieboom, K M M and Edwards, D}, - editor = {Tiesinnga, Hendrik and Berkhout, Remko}, - year = {2014}, - month = jul, - pages = {1--137}, - publisher = {{Labcraft Publishing}}, - address = {{London; San Francisco}}, - abstract = {The struggle to solve local and global issues often appears to pitch large corporations and governments against activists, artists, workers and ordinary citizens. But what happens when these entities consciously join forces and share resources to create social change? It's happening more than you might think-in a growing phenomenon known as social innovation labs. And Labcraft offers an intimate picture of this new and evolving landscape-where seemingly disparate stakeholders network and align as learning communities who collaborate for positive change. Social labs do what we expect laboratories to do-invent and experiment. But their "test tubes" are real-world challenges. And as they explore new connections, new ideas, and new initiatives, they often generate new perspectives and promising solutions. A fittingly collaborative effort in itself, Labcraft was written in a four-day "Book Sprint" by representatives from seven innovation labs from around the world. These practitioners share their stories, experiences and perspectives, and consider their commonalities and differences. They offer humble observations about their struggles and successes, and detail how they navigate their unique dilemmas and paradoxes. From workspaces and funding to impact measurement and power dynamics, Labcraft explores what it takes to cultivate a nimble and responsive environment-and gives a face to the poignant potential of these creative new collaborations. Change makers everywhere will be uplifted and inspired by this hopeful, fascinating window into emerging frontiers for building a better world.}, - isbn = {978-0-9905927-0-9}, - file = {/Users/fabio/Zotero/storage/G479J2XN/Jezierski et al_2014_Labcraft.pdf} -} - -@article{jhaLiteratureSearchSimple2022, - ids = {jha2022a,jha2022b}, - title = {Literature Search: {{Simple}} Rules for Confronting the Unknown}, - shorttitle = {Literature Search}, - author = {Jha, Ruchika and Sondhi, Vishal and Vasudevan, Biju}, - year = {2022}, - month = sep, - journal = {Medical Journal, Armed Forces India}, - volume = {78}, - number = {Suppl 1}, - pages = {S14-S23}, - issn = {0377-1237}, - doi = {10.1016/j.mjafi.2022.07.009}, - abstract = {Literature search forms the foundation of most clinical decisions about patient management and is the starting point for all bedside/bench-side research. Despite being an essential tool in the armamentarium of all medical professionals and researchers, literature search remains a challenge, often resulting in frustration and waste of time (and resources). This article aims to provide a beginner's guide to information seekers for a step-wise approach to literature search on web-based databases.}, - langid = {english}, - pmcid = {PMC9485859}, - pmid = {36147432}, - keywords = {Database,Embase,PubMed,Web of science}, - file = {/Users/fabio/Zotero/storage/2FB8BXJR/Jha et al_2022_Literature search.pdf;/Users/fabio/Zotero/storage/IXC8TFFH/S0377123722001290.html} -} - -@article{jhblockEightTipsQuestions2020, - title = {Eight Tips and Questions for Your Bibliographic Study in Business and Management Research}, - author = {JH Block, C Fisch}, - year = {2020}, - month = aug, - journal = {Manag Rev Q}, - volume = {70}, - number = {3}, - pages = {307--312}, - publisher = {{Springer}}, - doi = {10.1007/s11301-020-00188-4}, - urldate = {2021-07-15}, - file = {/Users/fabio/Zotero/storage/FJ658P3U/full-text.pdf} -} - -@article{Jia2014a, - title = {Poly (Lactic Acid) Fibre Reinforced Biodegradable Composites}, - author = {Jia, Weiwei and Gong, R. Hugh and Hogg, Paul J.}, - year = {2014}, - month = jun, - journal = {Composites Part B: Engineering}, - volume = {62}, - pages = {104--112}, - publisher = {{Elsevier Ltd}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2014.02.024}, - urldate = {2014-03-20}, - keywords = {a,b,d,electron microscopy,matrix composites,mechanical properties,pmcs,polymer}, - file = {/Users/fabio/Zotero/storage/38MM2G93/Jia, Gong, Hogg - 2014 - Poly (lactic acid) fibre reinforced biodegradable composites.pdf} -} - -@article{Jia2018, - title = {Dynamic Analysis of Construction and Demolition Waste Management Model Based on System Dynamics and Grey Model Approach}, - author = {Jia, Shuwei and Liu, Xiaolu and Yan, Guangle}, - year = {2018}, - month = nov, - journal = {Clean Technologies and Environmental Policy}, - volume = {20}, - number = {9}, - pages = {2089--2107}, - issn = {1618-954X}, - doi = {10.1007/s10098-018-1594-3} -} - -@article{Jian2019, - title = {Collaborative Collection Effort Strategies Based on the ``{{Internet}} + Recycling'' Business Model}, - author = {Jian, Huiyun and Xu, Minli and Zhou, Li}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {241}, - pages = {118120}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118120}, - abstract = {``Internet + recycling'', a new and emerging collecting mode, is booming in conjunction with widespread Internet use in China. For the recycling of waste electrical and electronic equipment (WEEE), this paper studies collaborative collection effort strategies in a collection system consisting of a third-party and an e-tailer based on the ``Internet + recycling'' business model. Considering the collaboration occurring during collecting and selling and mutual influences of partners on the recycling of old products, the paper applies collection effort cost sharing mechanisms to promote recycling. Four models, namely, the centralized model (C-Model), unit transfer price model (P-Model), unilateral cost sharing model (U-Model) and bilateral cost sharing model (B-Model), are established, and optimal decisions and members' profits in various collaborative models are derived and compared. The results show that there exists an interval of profit sharing proportions in which each of the two cost sharing models is a Pareto improvement of the P-Model, and the total collection volume and profit of the collecting system increase in the B-Model relative to those in the U-Model under the same proportion of profit sharing. However, the B-Model is not necessarily a Pareto improvement of the U-Model. The results also show that profit improvements of both parties can be achieved without the third-party sharing the e-tailer's collection effort cost in the B-Model when the collaborative marginal profit is large enough. The paper further explores the impact of the collaborative marginal profit and third-party's market influence on the total collection volume and the efficiency of the collecting system. This study provides insight into the promotion of WEEE recycling and into the selection of collaborative strategies for Internet recycling enterprises. The work will prove beneficial to the development of the WEEE ``Internet + recycling'' industry.}, - keywords = {Bilateral participation,Collaboration,Collection effort,Cost sharing,Internet + recycling,WEEE}, - file = {/Users/fabio/Zotero/storage/Z2G686CC/Collaborative collection effort strategies based on the “Internet + recycling” business model.pdf} -} - -@article{Jiang2016, - title = {Social Manufacturing as a Sustainable Paradigm for Mass Individualization}, - author = {Jiang, Pingyu and Leng, Jiewu and Ding, Kai and Gu, Peihua and Koren, Yoram}, - year = {2016}, - journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, - volume = {230}, - number = {10}, - pages = {1961--1968}, - issn = {20412975}, - doi = {10.1177/0954405416666903}, - abstract = {With increasing product personalization and open innovation, the manufacturing paradigm has been transforming to a more decentralized and socialized one. Social manufacturing was proposed as a new paradigm for industry. It extends the crowdsourcing idea to the manufacturing area. By establishing cyber-physical-social connection via decentralized social media, various communities can be formed as complex, dynamic autonomous systems to co-create customized and personalized products and services. This article presents the concept and characteristics of social manufacturing including distributed, adaptive, and self-organization. It also addresses social intelligence in proactive decision-making for organization of socialized resources and producers in the life-cycle of product.}, - keywords = {cyber-physical-social system,mass individualization,product personalization,Social manufacturing,sustainable paradigm}, - file = {/Users/fabio/Zotero/storage/2V9I2ARK/Social manufacturing as a sustainable paradigm for mass individualization.pdf} -} - -@article{Jiang2017, - title = {Predicting the Future of Additive Manufacturing: {{A Delphi}} Study on Economic and Societal Implications of {{3D}} Printing for 2030}, - author = {Jiang, Ruth and Kleer, Robin and Piller, Frank T.}, - year = {2017}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {117}, - pages = {84--97}, - publisher = {{The Authors}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2017.01.006}, - keywords = {3D printing,additive manufacturing,Additive manufacturing,Delphi,Forecasting,Scenario development}, - file = {/Users/fabio/Zotero/storage/ZP4UPHBE/Predicting the future of additive manufacturing A Delphi study on economic and societal implications of 3D printing for 2030.pdf} -} - -@article{Jiang2018, - title = {Occurrence of Microplastics and Its Pollution in the Environment: {{A}} Review}, - author = {Jiang, Jia-Qian}, - year = {2018}, - month = jan, - journal = {Sustainable Production and Consumption}, - volume = {13}, - pages = {16--23}, - issn = {23525509}, - doi = {10.1016/j.spc.2017.11.003} -} - -@article{Jiang2020, - title = {Data-Driven Analytical Framework for Waste-Dumping Behaviour Analysis to Facilitate Policy Regulations}, - author = {Jiang, Peng and Fan, Yee Van and Zhou, Jieyu and Zheng, Meimei and Liu, Xiao and Kleme{\v s}, Ji{\v r}{\'i} Jarom{\'i}r}, - year = {2020}, - month = feb, - journal = {Waste Management}, - volume = {103}, - pages = {285--295}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.12.041}, - file = {/Users/fabio/Zotero/storage/S2JSFZ8B/Data-driven analytical framework for waste-dumping behaviour analysis to facilitate policy regulations.pdf} -} - -@article{jiangAssessmentPlasticStocks2020, - title = {Assessment of {{Plastic Stocks}} and {{Flows}} in {{China}}: 1978-2017}, - author = {Jiang, Xiaobin and Wang, Tao and Jiang, Meng and Xu, Ming and Yu, Yadong and Guo, Baohua and Chen, Dingjiang and Hu, Shanying and Jiang, Jian and Zhang, Yupeng and Zhu, Bing}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104969}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104969}, - urldate = {2020-06-18}, - abstract = {Plastics have a broad range of use, but also bring about a variety of environmental implications. China is the world's largest producer and user of plastics, accounting for nearly one-third of the total global flow. Investigating plastic production and use in China is thus critical for developing solutions to promote material circularity and to minimize environmental impacts. We examined five categories of plastics\textemdash polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), and acrylonitrile-butadiene-styrene (ABS)\textemdash which together contribute 74\% of China's total primary plastic consumption. We employed a dynamic model to quantify the material stocks and flows of these five plastics from 1978-2017. The results show that the annual use of these five major plastics increased dramatically from 1 million ton/annual (Mt/a, equivalent to 1 kg/capita) in 1978 to 63 Mt/a (46 kg/capita) in 2017. The in-use plastic stocks were estimated at 305 Mt (219 kg/capita) as of 2017, with 60\% in building and construction sectors. The rapid increase in plastic use generated substantial post-consumer waste flows up to 44 Mt/a in 2017, out of which 26 Mt/a was packaging waste. Over the past 40 years, 29\% of the plastic waste was recycled to produce secondary materials, in comparison to 12\% incinerated, 42\% landfilled, and 17\% discarded without any proper treatment. Policy implications for enhancing plastic recycling are discussed.}, - keywords = {China,Material flow analysis,Plastics,Recycling,Waste management} -} - -@article{jiangEcosystemServicesResearch2017, - title = {Ecosystem Services Research in {{China}}: {{A}} Critical Review}, - author = {Jiang, Wei}, - year = {2017}, - month = aug, - journal = {Ecosystem Services}, - volume = {26}, - pages = {10--16}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.05.012}, - urldate = {2021-04-23}, - abstract = {Research on ecosystem services (ES) in China has become one of the fastest growing areas in the last decades. A systematic literature review with the establishment of a national ES research database was conducted in this paper. The analysis of the database including 175 studies published in international peer-reviewed journals identified six categories of research focus, among which monetary valuation attracted the most attention. Two approaches in the monetary valuation studies are dominant, unit value based approach and primary data based approach. Challenges of Chinese ES research consist in the lack of internationally accepted frameworks, which leads to the confusing use of terminology for ecosystem type and ES class. Critics also exist in the significance of monetary valuation, because most of the case studies in China were based on the unit value transfer method. In addition, Chinese scholars seem to be unaware of the progress of cultural ecosystem services research and few studies with particular focus on CES are found. This paper concludes with the anticipation of a TEEB country study for China.}, - keywords = {China,Ecosystem services,Literature review,Monetary valuation,Policy evaluation} -} - -@article{jiangNovelFabricationStrategy2020, - title = {A Novel Fabrication Strategy for Additive Manufacturing Processes}, - author = {Jiang, Jingchao}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {272}, - pages = {122916}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122916}, - urldate = {2020-07-14}, - abstract = {Additive manufacturing (AM) has been increasingly developed and applied in many fields nowadays. However, it takes a long time for completing a part due to the layer-by-layer manner of AM process which is time-consuming. A variety of studies have been carried out to plan the process of AM to save fabrication time, such as increasing layer thickness to reduce total layer numbers and path planning to find the shortest total travel path to save printhead travel time. In this paper, a novel fabrication strategy for AM is proposed to save fabrication time. The novelty of this strategy is on the consideration that the part does not need to be fabricated in a layer-by-layer manner, but in a multilayer-by-multilayer manner when the part has some independent features. This strategy includes five steps. Firstly, the part needs to be positioned in an optimal print direction. Secondly, the independent features in this part needs to be detected. Thirdly, the closest distances between independent features in each sliced layer are calculated and recorded. Then the nozzle moving strategy between each independent feature can be generated based on the distance recorded in the previous step. Lastly, the part can be sent to the AM machine for final manufacture using the proposed novel fabrication strategy. A case study was carried out for validation. The results show that the proposed multilayer-by-multilayer strategy can save 1039s of time for fabricating the part in the case study, compared with conventional layer-by-layer method.}, - keywords = {Additive manufacturing,Fabrication strategy,Fabrication time} -} - -@article{jiangPerceptivePreferenceRecycling2021, - title = {Perceptive Preference toward Recycling Bin Designs: {{Influential}} Design Item Depending on Waste Type, the Impact of Past Perception Experiences on Design Preference, and the Effect of Color Design on Waste Separation}, - author = {Jiang, Qiuhui and Leeabai, Nattapon and Dilixiati, Dilinazi and Takahashi, Fumitake}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {127}, - pages = {130--140}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.04.037}, - urldate = {2021-05-03} -} - -@article{Jimenez-Rosado2019, - title = {Bioplastics Based on Wheat Gluten Processed by Extrusion}, - author = {{Jim{\'e}nez-Rosado}, M. and {Zarate-Ram{\'i}rez}, L.S. and Romero, A. and Bengoechea, C. and Partal, P. and Guerrero, A.}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {117994}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117994} -} - -@article{Jin2017, - title = {Modeling of the Chemical Finishing Process for Polylactic Acid Parts in Fused Deposition Modeling and Investigation of Its Tensile Properties}, - author = {Jin, Yifan and Wan, Yi and Zhang, Bing and Liu, Zhanqiang}, - year = {2017}, - month = feb, - journal = {Journal of Materials Processing Technology}, - volume = {240}, - pages = {233--239}, - publisher = {{Elsevier Ltd}}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2016.10.003}, - urldate = {2021-01-12}, - abstract = {Fused deposition modeling has become one of the most diffused rapid prototyping techniques, which is widely used to fabricate prototypes. However, further application of this technology is severely affected by poor surface roughness primarily due to staircase effect. It is necessary to adopt post-treatment operations to improve surface quality. Chemical finishing is typically employed to finish parts in fused deposition modeling. The purpose of this paper is to provide a universal finishing method or solution for FDM parts made up of PLA, and to represent the evolution of surface topography between adjacent layers during the chemical finishing operation by building a geometrical model of the deposited filament. Case study was used to validate the proposed model by an experimental observation using a 3D laser scanning microscope. The comparison between theoretical computed values and observed data shows a significant reliability by means of statistical analysis. Subsequently a number of specimens are tested to determine the changes in tensile properties of fused deposition modeling parts building in different orientations. The results show that the horizontal build directions have little influence on the tensile strength. And, untreated specimens of polylactic acid show brittle behavior due to the inherent material properties. Because of the thin transparent film formed on the appearance, the tensile mechanical properties of specimens after chemical finishing are obviously changed, with the result that the tensile strength reduces by 63\% and elongations at break improve by 50\%. This chemical finishing not only decreases the roughness of parts manufactured in fused deposition modeling significantly, but also improves the toughness of polylactic acid parts.}, - keywords = {Chemical finishing,Fused deposition modeling,Polylactic acid,Tensile test}, - file = {/Users/fabio/Zotero/storage/XWZQ2HXL/Jin et al. - 2017 - Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation.pdf} -} - -@article{Jindal2016, - title = {A Fuzzy-Based Decision Support Framework for Product Recovery Process Selection in Reverse Logistics}, - author = {Jindal, Anil and Sangwan, Kuldip Singh}, - year = {2016}, - journal = {International Journal of Services and Operations Management}, - volume = {25}, - number = {4}, - pages = {413}, - issn = {1744-2370}, - doi = {10.1504/IJSOM.2016.10000346} -} - -@article{jiNovelExperimentalApproach2022, - title = {A Novel Experimental Approach to Quantitatively Evaluate the Printability of Inks in {{3D}} Printing Using Two Criteria}, - author = {Ji, Haohao and Zhao, Jin and Chen, Jie and Shimai, Shunzo and Zhang, Jian and Liu, Yu and Liu, Dianzi and Wang, Shiwei}, - year = {2022}, - month = jul, - journal = {Additive Manufacturing}, - volume = {55}, - pages = {102846}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102846}, - urldate = {2022-05-23} -} - -@article{jiskaniMiningClimateNeutrality2023, - title = {Mining 4.0 and Climate Neutrality: {{A}} Unified and Reliable Decision System for Safe, Intelligent, and Green \& Climate-Smart Mining}, - shorttitle = {Mining 4.0 and Climate Neutrality}, - author = {Jiskani, Izhar Mithal and Zhou, Wei and Hosseini, Shahab and Wang, Zhiming}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {410}, - pages = {137313}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137313}, - urldate = {2023-05-01}, - abstract = {The global transition to cleaner energy sources intensifies pressure on the mining industry to secure the supply of energy transition minerals. However, fulfilling the demands of climate-driven technologies must not compromise critical factors such as health, safety, production efficiency, and the environmental and climatic impacts of mineral extraction. To remain future-fit, the mining industry must adapt to changing demands and realize safe, intelligent, and green \& climate-smart (SIGCS) practices. This research offers nuanced insight into building a sustainable future for the mining industry with the advent of Mining 4.0. To achieve this, the investigation centers around two objectives. First, it proposes a unified index system for concurrently implementing SIGCS mining. Second, it develops a reliable evaluation model that integrates Z-number theory and Measurement of Alternatives and Ranking according to COmpromise Solution method (Z-MARCOS). The proposed decision system prioritizes twenty-one development approaches according to their significance and determines areas requiring immediate attention to make SIGCS mining successful. Results indicate that ``digitization'' is the top priority option. ``Mechanization and automation'', ``intellectualization'', ``energy conservation and utilization'', and ``autonomous and unmanned vehicles'' were ranked second, third, and fourth, respectively. This study is a pioneering effort in providing technical assistance for implementing SIGCS practices, enabling the mining industry to secure the supply of energy transition minerals while contributing responsibly to global efforts towards achieving climate neutrality.}, - langid = {english}, - keywords = {Climate neutrality,Energy transition minerals,Mining 4.0,Sustainable mining,Z-MARCOS}, - file = {/Users/fabio/Zotero/storage/NALXTH7T/Jiskani et al_2023_Mining 4.pdf;/Users/fabio/Zotero/storage/LKVF885D/S0959652623014713.html} -} - -@article{Joaquin2020, - title = {Sustainability {{Science}} Is {{Ethics}}: {{Bridging}} the {{Philosophical Gap}} between {{Science}} and {{Policy}}}, - author = {Joaquin, Jeremiah Joven B. and Biana, Hazel T.}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - pages = {104929}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104929}, - urldate = {2020-05-08}, - file = {/Users/fabio/Zotero/storage/GJN5MTSN/Sustainability science is ethics- Bridging the philosophical gap between science and policy.pdf} -} - -@article{johansenReviewPlasticValue2022, - title = {A Review of the Plastic Value Chain from a Circular Economy Perspective}, - author = {Johansen, Mathilde Rosenberg and Christensen, Thomas Budde and Ramos, Tiffany Marilou and Syberg, Kristian}, - year = {2022}, - month = jan, - journal = {Journal of Environmental Management}, - volume = {302}, - pages = {113975}, - issn = {0301-4797}, - doi = {10.1016/j.jenvman.2021.113975}, - urldate = {2023-08-21}, - abstract = {Although plastic is one of the most commonly used materials in our everyday life, the current linear economy (`produce, use and dispose') engenders high risks to human health in relation to greenhouse gas (GHG) emissions and environmental pollution. As a response to these challenges, the circular plastic economy is gaining momentum, where the goal is to reduce, reuse and recycle all plastic. The transition to the circular economy should be made across the entire plastics value chain in order to ensure circular design, production, use and waste management. This study examines the current scientific literature in relation to the entire value chain of plastics. This aim of the article is to provide an overview of the existing research (and highlight research gaps) associated with the transition of plastic use to a circular model. The literature was divided into the following categories: 1) design; 2) production; 3) use; 4) end-of-life; and 5) value chain. A high proportion of the literature was found to address the end-of-life phase, suggesting that the other phases are currently neglected. The results have implications that are applicable to multiple phases; in particular, contamination of waste streams and composite materials places significant limitations on the opportunity to recycle and reuse plastic in new products. This calls for changes in the whole value chain, and for trans-sectorial collaboration to ensure systemic transparency. Therefore, future research should take a holistic approach to the transition to circular through careful mapping of implications, stakeholder involvement and collaboration.}, - keywords = {Circular economy,Plastic,Recycling,Reuse,Waste}, - file = {/Users/fabio/Zotero/storage/WEMMBGXQ/Johansen et al_2022_A review of the plastic value chain from a circular economy perspective.pdf;/Users/fabio/Zotero/storage/SN28IEVD/S0301479721020375.html} -} - -@article{John2009, - title = {Innovation {{Labs Explained}}:}, - author = {John, St}, - year = {2009}, - number = {1}, - pages = {1--51} -} - -@inproceedings{Johnson2011, - title = {Benchmarking Evaluation of an {{Open Source Fused Deposition Modeling Additive Manufacturing System}}}, - booktitle = {Proc of the 22nd {{Annual International Solid Freeform Fabrication Symposium}}}, - author = {Johnson, W. M. and Rowell, M. and Deason, B. and Eubanks, M.}, - year = {2011}, - pages = {197--211}, - address = {{Austin, Texas}}, - abstract = {The availability of more affordable open source Additive Manufacturing (AM) systems has lead to the increased awareness and use of AM technologies. However, further expansion will necessitate improved reliability and an increased understanding in the limitations of these systems. This paper will review previous benchmarking models, and present the development of a new benchmarking model and its application in the evaluation of an open source AM system based on fused deposition modeling (FDM). The proposed benchmarking model includes various geometric features to evaluate the AM system in terms of dimensional accuracy, thermal warpage, staircase effect, and geometric and dimensional tolerances.}, - file = {/Users/fabio/Zotero/storage/J3J74QE7/Johnson et al. - 2011 - Benchmarking evaluation of an Open Source Fused Deposition Modeling Additive Manufacturing System.pdf} -} - -@article{Johnson2013, - title = {Additive Manufactured Textiles for High-Performance Stab Resistant Applications}, - author = {Johnson, Andrew and a. Bingham, Guy and Wimpenny, David I.}, - year = {2013}, - journal = {Rapid Prototyping Journal}, - volume = {19}, - number = {3}, - pages = {199--207}, - issn = {1355-2546}, - doi = {10.1108/13552541311312193}, - abstract = {Purpose - The purpose of this paper is to ascertain the stab resistance characteristics of a series of planar and articulated laser sintered (LS) samples, in accordance with the United Kingdom Home Office Scientific Development Branch (HOSDB) Body Armour Standard - Publication 39/07. Design/methodology/approach - A series of LS planar samples were manufactured using an EOS P100 Formiga system, manufactured from 100 per cent virgin or a 50:50 mix of recycled and virgin Nylon (PA2200), ranging in thickness from 1-10 mm. All planar samples were stab tested to the HOSDB knife-resistance (KR) level one impact energy of 24 Joules, using an in-house manufactured HOSDB guided rail drop test impact rig and standardised knives. Penetration through the underside of each sample was measured and recorded. These results were then used to develop an articulated, additive manufactured (AM) scale textile - LS from a 50:50 mix of recycled and virgin PA2200 powder. These samples were then tested using the aforementioned impact rig and stab impact energy. Findings - The research demonstrated that while virgin PA2200 sample required a minimum thickness of 8mm to achieve stab-resistance below the HOSDB maximum penetration limit of 7 mm, this figure can be reduced to 5.6mm when manufacturing LS planar samples from a 50:50 mix of virgin and recycled PA2200. Results from stab testing the articulated samples indicated a successful AM textile-like design, with a maximum knife penetration of 1.6mm - below the 7mm HOSDB limit. Originality/value - The paper describes a unique application of AM technologies for the manufacture of high-performance stab resistant AM textiles. \textcopyright{} Emerald Group Publishing Limited.}, - isbn = {9780956664310}, - keywords = {additive manufactured textile,advanced manufacturing technologies,body armour,branch,high-performance,home office scientific development,laser sintering,paper type research paper,protective clothing,stab resistant,textile technology,united kingdom}, - file = {/Users/fabio/Zotero/storage/KQXPBZ23/Additive manufactured textiles for high-performance stab resistant applications.pdf} -} - -@article{johnstoneWorldWarsSociotechnical2022, - title = {World Wars and Sociotechnical Change in Energy, Food, and Transport: {{A}} Deep Transitions Perspective.}, - author = {Johnstone, Phil and McLeish, Caitriona}, - year = {2022}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {174}, - pages = {121206}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121206}, - urldate = {2021-09-27} -} - -@article{Jompang2013a, - title = {Poly({{Lactic Acid}}) and {{Poly}}({{Butylene Succinate}}) {{Blend Fibers Prepared}} by {{Melt Spinning Technique}}}, - author = {Jompang, Lalita and Thumsorn, Supaphorn and On, Jessada Wong and Surin, Prayoon and Apawet, Chiyaprek and Chaichalermwong, Tirapong and Kaabbuathong, Narin and {O-Charoen}, Narongchai and Srisawat, Natee}, - year = {2013}, - month = jan, - journal = {Energy Procedia}, - volume = {34}, - pages = {493--499}, - publisher = {{Elsevier B.V.}}, - issn = {18766102}, - doi = {10.1016/j.egypro.2013.06.777}, - urldate = {2014-03-20}, - file = {/Users/fabio/Zotero/storage/8QZAD9QR/Jompang et al. - 2013 - Poly(Lactic Acid) and Poly(Butylene Succinate) Blend Fibers Prepared by Melt Spinning Technique.pdf} -} - -@misc{Jonas2014a, - title = {`{{Renaturing}} Cities' by Urban Living Labs}, - author = {Jonas, Bylund}, - year = {2014}, - journal = {jpi-urbaneurope.eu}, - pages = {1--4} -} - -@article{Jones2011, - title = {{{RepRap}} \textendash{} the Replicating Rapid Prototyper}, - author = {Jones, Rhys and Haufe, Patrick and Sells, Edward and Iravani, Pejman and Olliver, Vik and Palmer, Chris and Bowyer, Adrian}, - year = {2011}, - month = jan, - journal = {Robotica}, - volume = {29}, - number = {01}, - pages = {177--191}, - issn = {0263-5747}, - doi = {10.1017/S026357471000069X}, - urldate = {2014-03-05}, - keywords = {additive fabrication,biomimetics,design,design has changed into,free software,fused-filament fabrication,how and why that,its current,mutualism,open-,rapid prototyping,self-replicating machine,source}, - file = {/Users/fabio/Zotero/storage/7YH6VE7G/Jones et al. - 2011 - RepRap – the replicating rapid prototyper(2).pdf;/Users/fabio/Zotero/storage/WUFUI2HT/Jones et al. - 2011 - RepRap – the replicating rapid prototyper.pdf} -} - -@article{jonesBridgingGapStrategic2020, - title = {Bridging the Gap: {{A}} Strategic Framework for Implementing Best Practice Guidelines in Environmental Modelling}, - author = {Jones, Hannah F.E. and {\"O}zkundakci, Deniz and Hunt, Stephen and Giles, Hilke and Jenkins, Bevan}, - year = {2020}, - month = dec, - journal = {Environmental Science \& Policy}, - volume = {114}, - pages = {533--541}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2020.09.030}, - urldate = {2020-10-19} -} - -@article{jonesPowerGoodDecisions2022, - title = {The Power of Good Decisions: {{Promoting}} Eco-Informed Design Attitudes in Plastic Selection and Use}, - author = {Jones, Mitchell P. and Archodoulaki, Vasiliki-Maria and K{\"o}ck, Bianca-Maria}, - year = {2022}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {182}, - pages = {106324}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106324}, - urldate = {2022-04-08} -} - -@article{jonesUnderstandingPublicPerceptions2022, - title = {Understanding Public Perceptions of Chemical Recycling: {{A}} Comparative Study of Public Attitudes towards Coal and Waste Gasification in {{Germany}} and the {{United Kingdom}}}, - author = {Jones, Christopher R. and Lee, Roh Pin and Kaklamanou, Daphne}, - year = {2022}, - month = apr, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.04.011}, - urldate = {2022-04-25} -} - -@article{jonesWasteManagementAustralia2020, - title = {Waste Management in {{Australia}} Is an Environmental Crisis: {{What}} Needs to Change so Adaptive Governance Can Help?}, - author = {Jones, Stephen}, - year = {2020}, - month = nov, - journal = {Sustainability (Switzerland)}, - volume = {12}, - number = {21}, - pages = {1--17}, - publisher = {{MDPI}}, - issn = {20711050}, - doi = {10.3390/SU12219212}, - urldate = {2022-03-13}, - abstract = {Research suggests that strengthening cooperation between governments is required to support improved policy outcomes. Despite established cooperative agreements between the levels of government in Australia, a lack of urgency and consistency continues to drive unsustainable approaches toward waste management practices. Adaptive governance has emerged as a potential approach for addressing complexity, with multiple actors collaborating in the design and implementation of challenging environmental issues. The main findings of this research highlight key challenges in multilevel systems and reforms required to establish institutional arrangements that support key adaptive governance enablers in the context of cooperative approaches to waste management.}, - keywords = {Australia,Circular economy,Cooperation,Multilevel system,Waste management} -} - -@article{Jong2013, - title = {From 3-{{D Printing Innovation Lessons From}} 3-{{D Printing QUESTION}}}, - author = {Jong, Jeroen P J De and Bruijn, Erik De}, - year = {2013}, - journal = {MIT Sloan Management Review}, - volume = {54 (2)}, - number = {54212}, - pages = {43--52}, - issn = {1532-9194}, - abstract = {When people in online user communities start collaboratively developing open-source innovations that have the potential to change an industry, how should the existing companies in the industry respond? THE LEADING QUESTION Is open source innovation a threat or an opportunity? FINDINGS Collaborative user innovation is most likely to happen in three kinds Existing companies have five possible responses. Existing companies have five possible responses.}, - isbn = {1532-9194}, - file = {/Users/fabio/Zotero/storage/6XRJIDET/Innovation Lessons From 3-D Printing_coments.pdf} -} - -@article{Josa2019, - title = {Infrastructures and Society: From a Literature Review to a Conceptual Framework}, - author = {Josa, I. and Aguado, A.}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117741}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117741} -} - -@article{joshiImpactPolicyInstruments2021, - title = {Impact of Policy Instruments on Lead-Acid Battery Recycling: {{A}} System Dynamics Approach}, - author = {Joshi, Brahmesh Vinayak and Vipin, B and Ramkumar, Janakarajan and Amit, R K}, - year = {2021}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {169}, - pages = {105528}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105528}, - urldate = {2021-03-08} -} - -@incollection{Josupeit2015, - title = {{{MATERIAL PROPERTIES OF LASER SINTERED POLYAMIDE}} 12 {{AS FUNCTION OF BUILD CYCLES USING LOW REFRESH RATES}}.}, - booktitle = {Solid {{Free}} Form {{Fabrication Proceedings}}}, - author = {Josupeit, Stefan and Lohn, Johannes and Hermann, Eduard and Gessler, Monika and Tenbrink, Stephan and Schmid, Hans-Joachim}, - year = {2015}, - pages = {540--548}, - address = {{Austin, Texas}}, - file = {/Users/fabio/Zotero/storage/KNAT345V/MATERIAL PROPERTIES OF LASER SINTERED POLYAMIDE 12 AS FUNCTION OF BUILD CYCLES USING LOW REFRESH RATES.pdf} -} - -@article{Josupeit2017, - title = {Experimental Analysis and Modeling of Local Ageing Effects during Laser Sintering of Polyamide 12 in Regard to Individual Thermal Histories}, - author = {Josupeit, Stefan and Schmid, Hans Joachim}, - year = {2017}, - journal = {Journal of Applied Polymer Science}, - volume = {134}, - number = {42}, - pages = {1--10}, - issn = {10974628}, - doi = {10.1002/app.45435}, - abstract = {\textcopyright{} 2017 Wiley Periodicals, Inc. Polymer laser sintering (LS) is an important additive manufacturing (AM) technology. Individual and complex parts are directly produced from CAD data without the need of specific tools. The raw material is a polymer powder, which is deposited layerwise and melted selectively with a laser. Built parts are embedded in residual unmolten powder, the so-called part cake, which undergoes thermal ageing effects due to the exposure to high temperatures for long times during the manufacturing process. Hence, the recyclability of the unmolten powder is limited. This article focuses on a fundamental analysis of the ageing kinetics dependent on time, temperature, and oxygen content in the gas atmosphere. A model is developed and applied to measured, position-dependent process temperature histories to successfully predict the ageing distribution within a part cake. The results can be used to optimize the thermal process management in LS and to develop new efficient powder recycling methods.}, - keywords = {ageing,degradation,polyamide,polycondensation}, - file = {/Users/fabio/Zotero/storage/APFIJ83A/Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histor.pdf} -} - -@article{Joy2019, - title = {Social Innovation Labs: {{A}} Neoliberal Austerity Driven Process or Democratic Intervention?}, - author = {Joy, Meghan and Shields, John and Cheng, Siu Mee}, - year = {2019}, - month = aug, - journal = {Altern. Routes A J. Crit. Soc. Res.}, - volume = {30}, - number = {2}, - pages = {35--54}, - abstract = {Social Innovation Labs (SILs) are a recent policymaking development that are spreading rapidly in many different countries. SILs are said to address difficult and complex social policy problems that have been resistant to solutions. To date, there has been limited scholarly analysis of SIL development, with many questions in need of critical policy assessment. This paper seeks to conceptualize SILs in the Canadian context by mapping the sector and exploring how these labs fit within the broader ecosystem of policy innovation. We consider why SILs have become so popular in this particular socio-political moment. We contend that the SIL trend speaks to a dual and contradictory desire on the part of governments for more participatory policymaking and cost saving. Thus, while SILs may create opportunities for the democratization of social policy, they are also motivated by efforts to do more with less in an environment shaped by austerity and neoliberalism. This suggests that SILs could equally result in the marketization and depoliticization of social policy. This paper highlights these tensions conceptually with the purpose of guiding empirical studies that explore how these contradictions may manifest in policy practice and perhaps offer openings for policy that addresses both the roots and symptoms of complex social policy problems.}, - file = {/Users/fabio/Zotero/storage/7S7LNHU9/Joy et al_2019_Social innovation labs.pdf} -} - -@article{Joyce2016, - title = {The Triple Layered Business Model Canvas: {{A}} Tool to Design More Sustainable Business Models}, - author = {Joyce, Alexandre and Paquin, Raymond L}, - year = {2016}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {135}, - pages = {1474--1486}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2016.06.067}, - urldate = {2020-11-24}, - abstract = {The Triple Layered Business Model Canvas is a tool for exploring sustainability-oriented business model innovation. It extends the original business model canvas by adding two layers: an environmental layer based on a lifecycle perspective and a social layer based on a stakeholder perspective. When taken together, the three layers of the business model make more explicit how an organization generates multiple types of value e economic, environmental and social. Visually representing a business model through this canvas tool supports developing and communicating a more holistic and integrated view of a business model; which also supports creatively innovating towards more sustainable business models. This paper presents the triple layer business model canvas tool and describes its key features through a re-analysis of the Nestl e Nespresso business model. This new tool contributes to sustainable business model research by providing a design tool which structures sustainability issues in business model innovation. Also, it creates two new dynamics for analysis: horizontal coherence and vertical coherence.}, - file = {/Users/fabio/Zotero/storage/9MTIRQ65/full-text.pdf} -} - -@article{joyceFuturaNewTool2022, - title = {Futura: {{A}} New Tool for Transparent and Shareable Scenario Analysis in Prospective Life Cycle Assessment}, - author = {Joyce, P. James and Bj{\"o}rklund, Anna}, - year = {2022}, - month = feb, - journal = {Journal of Industrial Ecology}, - volume = {26}, - number = {1}, - pages = {134--144}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13115}, - urldate = {2022-03-06}, - abstract = {While it may be impossible to accurately predict what the world will look like in the future, we can be certain that it will be different from the world of today. By extension, we know that using today's data in life cycle assessment (LCA) studies claiming to represent future scenarios is problematic. For the future impact of products to be estimated in a consistent and meaningful manner in LCA, the background system, most commonly the ecoinvent database, needs to be projected into the future alongside the foreground system modeled in a given study. Futura is a new piece of open-source software which allows LCA practitioners to create and share novel background databases representing arbitrary scenarios. It allows users to import a base database and then start making targeted changes. These changes take three main forms\textemdash adding new technologies, regionalizing new or existing technologies, and altering market compositions. All changes made are automatically added to a "recipe." This recipe file can be shared publicly. This recipe can be imported by other users and used to exactly recreate the modified database. The additive and transparent nature of this system means that initially simple scenarios can be built upon by others to progress toward more comprehensive scenarios in a stepwise manner. The inability to build on the work of others is a serious barrier to the progress of the LCA field. Futura goes some way to reduce this barrier in the field of prospective LCA.}, - keywords = {industrial ecology,life cycle assessment (LCA),open,prospective LCA,scenario analysis,source software,transparency}, - file = {/Users/fabio/Zotero/storage/BXJ7D2T3/full-text.pdf} -} - -@article{juancarloscarvajalbermudezRoleTechnologiesCitizen2021, - title = {The Role of Technologies and Citizen Organizations in Decentralized Forms of Participation. {{A}} Case Study about Residential Streets in {{Vienna}}}, - author = {{Juan Carlos Carvajal Berm\'udez} and Koenig, Reinhard}, - year = {2021}, - month = aug, - journal = {Technology in Society}, - volume = {66}, - pages = {1--13}, - publisher = {{Pergamon}}, - doi = {10.1016/j.techsoc.2021.101604}, - urldate = {2021-06-08} -} - -@article{jungell-michelssonSufficiencySystematicLiterature2022, - title = {Sufficiency: {{A}} Systematic Literature Review}, - author = {{Jungell-Michelsson}, Jessica and Heikkurinen, Pasi}, - year = {2022}, - month = may, - journal = {Ecological Economics}, - volume = {195}, - pages = {107380}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2022.107380}, - urldate = {2022-03-13}, - abstract = {The making of sustainable economies calls for sufficiency in production and consumption. The discussion, however, lacks a shared understanding on what it means to operationalize sufficiency. In this article, we review and analyze the concept of sufficiency with a focus on its linkages to different economic scales (with a focus on micro- and macroeconomics) and economic actors (particularly consumers and producers). Altogether 307 articles were screened, resulting in a final data set of 94 peer-reviewed articles. In addition to the core assumption of `enoughness', we found three premises describing the concept: (1) complementarity of capitals, (2) social metabolism, and (3) altruism. In the reviewed literature, sufficiency is understood as both an end in itself and a means for bringing consumption and production within ecological limits. By conducting the first systematic literature review on sufficiency, the study explicates a more integrated understanding of sufficiency and highlights the need to treat sufficiency across economic scales and actors. In future research, empirical work should be emphasized to grasp the contextual varieties in the operationalization of sufficiency.}, - keywords = {Consumption,Eco-sufficiency,Economy,Production,Review,Sufficiency,Sustainability}, - file = {/Users/fabio/Zotero/storage/ND69ZECQ/full-text.pdf} -} - -@article{jungReviewPolymerTechnologies2023, - ids = {jung2023a}, - title = {Review of Polymer Technologies for Improving the Recycling and Upcycling Efficiency of Plastic Waste}, - author = {Jung, Hyuni and Shin, Giyoung and Kwak, Hojung and Hao, Lam Tan and Jegal, Jonggeon and Kim, Hyo Jeong and Jeon, Hyeonyeol and Park, Jeyoung and Oh, Dongyeop X.}, - year = {2023}, - month = apr, - journal = {Chemosphere}, - volume = {320}, - pages = {138089}, - issn = {0045-6535}, - doi = {10.1016/j.chemosphere.2023.138089}, - urldate = {2023-08-21}, - abstract = {Human society has become increasingly reliant on plastic because it allows for convenient and sanitary living. However, recycling rates are currently low, which means that the majority of plastic waste ends up in landfills or the ocean. Increasing recycling and upcycling rates is a critical strategy for addressing the issues caused by plastic pollution, but there are several technical limitations to overcome. This article reviews advancements in polymer technology that aim to improve the efficiency of recycling and upcycling plastic waste. In food packaging, natural polymers with excellent gas barrier properties and self-cleaning abilities have been introduced as environmentally friendly alternatives to existing materials and to reduce food-derived contamination. Upcycling and valorization approaches have emerged to transform plastic waste into high-value-added products. Recent advancements in the development of recyclable high-performance plastics include the design of super engineering thermoplastics and engineering chemical bonds of thermosets to make them recyclable and biodegradable. Further research is needed to develop more cost-effective and scalable technologies to address the plastic pollution problem through sustainable recycling and upcycling.}, - keywords = {Plastic sustainability,Plastic waste management,Polymer technology,Recycling,Upcycling}, - file = {/Users/fabio/Zotero/storage/WIDY4JR9/Jung et al. - 2023 - Review of polymer technologies for improving the r.pdf;/Users/fabio/Zotero/storage/2I26CFXC/S0045653523003569.html} -} - -@article{junjuriLowcostLIBSDetection2020, - title = {A Low-Cost {{LIBS}} Detection System Combined with Chemometrics for Rapid Identification of Plastic Waste}, - author = {Junjuri, Rajendhar and Gundawar, Manoj Kumar}, - year = {2020}, - month = nov, - journal = {Waste Management}, - volume = {117}, - pages = {48--57}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.07.046}, - urldate = {2020-08-17} -} - -@article{Junsheng2019, - title = {The Role of Mass Media in Communicating Climate Science: {{An}} Empirical Evidence}, - author = {Junsheng, Ha and Akhtar, Rulia and Masud, Muhammad Mehedi and Rana, Md Sohel and Banna, Hasanul}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117934}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117934} -} - -@article{Juraschek2017, - title = {Experiencing {{Closed Loop Manufacturing}} in a {{Learning Environment}}}, - author = {Juraschek, Max and Cerdas, Felipe and Posselt, Gerrit and Herrmann, Christoph}, - year = {2017}, - journal = {Procedia Manufacturing}, - volume = {9}, - pages = {57--64}, - publisher = {{The Author(s)}}, - issn = {23519789}, - doi = {10.1016/j.promfg.2017.04.046}, - abstract = {Closed-loop manufacturing reintegrates components and/or materials from the end-of-life products as input flows to produce new products. Today, most learning factories focus on the actual manufacturing system. Some learning factories extend the perspective and include the product development and product use phase. To enlarge the learning perspective towards end-of-life an existing learning factory is extended by a modular, self-designed recycling process chain enabling closed-loop manufacturing. The modular process chain consists of crushing end-of-life products and extruding new filament out of the shredded material. The filament is then utilized to create new products with 3D-printers substituting virgin material. The developed recycling process chain is implemented in an existing learning environment which is equipped with 3D-printers. Further didactic courses are designed considering the ageing of the material and the environmental impact along the product's life cycle.}, - isbn = {2351-9789}, - keywords = {3D Printing,Engineering Education,Learning Factory,Life Cycle Engineering,Product Lifecycle,Recycling}, - file = {/Users/fabio/Zotero/storage/2IEC7Z4N/Experiencing Closed Loop Manufacturing in a Learning Environment.pdf} -} - -@book{juraschek2022, - title = {Analysis and {{Development}} of {{Sustainable Urban Production Systems}}}, - author = {Juraschek, Max}, - year = {2022}, - series = {Sustainable {{Production}}, {{Life Cycle Engineering}} and {{Management}}}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-030-76602-3}, - urldate = {2022-09-26}, - isbn = {978-3-030-76601-6 978-3-030-76602-3}, - langid = {english}, - file = {/Users/fabio/Downloads/Juraschek - 2022 - Analysis and Development of Sustainable Urban Prod.pdf} -} - -@article{jurgilevichGovernanceModesEpistemologies2021, - title = {Governance Modes and Epistemologies of Future-Oriented Vulnerability Assessments: Example of a Mixed-Methods Approach}, - author = {Jurgilevich, Alexandra}, - year = {2021}, - month = feb, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102717}, - urldate = {2021-02-28}, - file = {/Users/fabio/Zotero/storage/NY69R9NL/full-text.pdf} -} - -@article{JustinoNetto2021, - title = {Screw-Assisted {{3D}} Printing with Granulated Materials: A Systematic Review}, - author = {Justino Netto, Joaquim Manoel and Idogava, Henrique Takashi and Frezzatto Santos, Luiz Eduardo and Silveira, Zilda de Castro and Romio, Pedro and Alves, Jorge Lino}, - year = {2021}, - month = jun, - journal = {The International Journal of Advanced Manufacturing Technology}, - pages = {1--17}, - publisher = {{Springer}}, - issn = {0268-3768}, - doi = {10.1007/s00170-021-07365-z}, - urldate = {2021-06-02}, - abstract = {This paper presents a systematic review on extrusion additive manufacturing (EAM), with focus on the technological development of screw-assisted systems that can be fed directly with granulated materials. Screw-assisted EAM has gained importance as an enabling technology to expand the range of 3D printing materials, reduce costs associated with feedstock fabrication, and increase the material deposition rate compared to traditional fused filament fabrication (FFF). Many experimental printheads and commercial systems that use some screw-processing mechanism can be found in the literature, but the design diversity and lack of standard terminology make it difficult to determine the most suitable solutions for a given material or application field. Besides, the few previous reviews have offered only a glimpse into the topic, without an in-depth analysis about the design of the extruders and associated capabilities. A systematic procedure was devised to identify the screw-assisted EAM systems that can print directly from granulated materials, resulting in 61 articles describing different pieces of equipment that were categorized as experimental printheads and commercial systems, for small-and large-scale applications. After describing their main characteristics , the most significant extruder modifications were discussed with reference to the materials processed and performance requirements. In the end, a general workflow for the development of 3D printers based on screw extrusion was proposed. This review intends to provide information about the state-of-the-art screw-assisted EAM and help the academy to identify further research opportunities in the field.}, - keywords = {Additive manufacturing,Fused particle deposition,Fused pellet modeling,Material extrusion,Powder melt extrusion}, - file = {/Users/fabio/Zotero/storage/B64SYGZD/full-text.pdf} -} - -@article{justinonettoDesignValidationInnovative2022, - ids = {justinonetto2022a}, - title = {Design and Validation of an Innovative {{3D}} Printer Containing a Co-Rotating Twin Screw Extrusion Unit}, - author = {Justino Netto, Joaquim Manoel and Sarout, Amir Ilkiu and Santos, Andre Luiz Grando and Lucas, Alessandra de Almeida and Chinelatto, Marcelo Aparecido and Alves, Jorge Lino and {Gaspar-Cunha}, Ant{\'o}nio and Covas, Jos{\'e} Ant{\'o}nio and Silveira, Zilda de Castro}, - year = {2022}, - month = nov, - journal = {Additive Manufacturing}, - volume = {59}, - pages = {103192}, - issn = {22148604}, - doi = {10.1016/j.addma.2022.103192}, - urldate = {2022-11-10}, - abstract = {This paper presents the design and validation of an innovative 3D printer containing a co-rotating twin screw extrusion unit (Co-TSE). Single screw print heads were developed in the mid-2000s as an alternative to filamentbased 3D printers, but they have limited process flexibility and mixing capacity. The new design accepts material in powder or micro-pellet form, and its dispersive and distributive mixing capacity can be fine tuned by setting output and screw rotation speed independently. The design combines a miniaturized modular Co-TSE operated under starve-fed conditions with a benchtop Cartesian platform. Numerical calculations were performed to ascertain whether the appropriate thermomechanical environment for polymer processing could be created by the proposed design. A prototype was built and extrusion tests were performed under different operating con\- ditions, using polypropylene and a 90/10 wt\% polypropylene/polystyrene blend. Two screw configurations were used, with and without kneading discs, to assess the response of the extrusion unit in terms of flow characteristics and mixing performance. The restriction to flow created by the mixing elements determines the starting melt position, and the average residence times, while their shearing and extensional action enhances homogenization effectiveness. The screw configuration and rotation speed do not affect the output, which depends only on the feed rate. Preliminary deposition tests were conducted to determine the feasible printing parameters. A standard tensile test specimen, a square scaffold and a multicolored rectangular box were successfully printed, validating the innovative design. The mechanical properties of printed test specimens were within the expected values.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/X5TNR8WH/Justino Netto et al. - 2022 - Design and validation of an innovative 3D printer .pdf} -} - -@article{Juujarvi2013c, - title = {Actor {{Roles}} in an {{Urban Living Lab}}: {{What Can We Learn}} from {{Suurpelto}}, {{Finland}}?}, - author = {Juuj{\"a}rvi, Soile and Pesso, Kaija}, - year = {2013}, - journal = {Technology Innovation Management Review}, - number = {November 2013: Living Labs}, - pages = {22--27}, - issn = {1927-0321} -} - -@article{Kabb2018, - type = {Research-Article}, - title = {Photoreversible {{Covalent Hydrogels}} for {{Soft-Matter Additive Manufacturing}}}, - author = {Kabb, Christopher P. and O'Bryan, Christopher S. and Deng, Christopher C. and Angelini, Thomas E. and Sumerlin, Brent S.}, - year = {2018}, - journal = {ACS Applied Materials and Interfaces}, - volume = {10}, - number = {19}, - pages = {16793--16801}, - publisher = {{American Chemical Society}}, - issn = {19448252}, - doi = {10.1021/acsami.8b02441}, - abstract = {Reversible covalent chemistry provides access to robust materials with the ability to be degraded and reformed upon exposure to an appropriate stimulus. Photoresponsive units are attractive for this purpose, as the spatial and temporal application of light is easily controlled. Coumarin derivatives undergo a [2 + 2] cycloaddition upon exposure to long-wave UV irradiation (365 nm), and this process can be reversed using short-wave UV light (254 nm). Therefore, polymers cross-linked by coumarin groups are excellent candidates as reversible covalent gels. In this work, copolymerization of coumarin-containing monomers with the hydrophilic comonomer N,N-dimethylacrylamide yielded water-soluble, linear polymers that could be cured with long-wave UV light into free-standing hydrogels, even in the absence of a photoinitiator. Importantly, the gels were reverted back to soluble copolymers upon short-wave UV irradiation. This process could be cycled, allowing for recycling and remolding of the hydrogel into additio...}, - isbn = {2018024418}, - keywords = {Coumarin,hydrogel,reversible covalent,soft-matter additive manufacturing} -} - -@article{Kabir2020, - title = {Prospects of Biopolymer Technology as an Alternative Option for Non-Degradable Plastics and Sustainable Management of Plastic Wastes}, - author = {Kabir, Ehsanul and Kaur, Rajnish and Lee, Jechan and Kim, Ki-Hyun and Kwon, Eilhann E.}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {258}, - pages = {120536}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120536} -} - -@article{Kadkhoda-Ahmadi2019, - title = {Process and Resource Selection Methodology in Design for Additive Manufacturing}, - author = {{Kadkhoda-Ahmadi}, Shervin and Hassan, Alaa and {Asadollahi-Yazdi}, Elnaz}, - year = {2019}, - month = jun, - journal = {The International Journal of Advanced Manufacturing Technology}, - issn = {0268-3768}, - doi = {10.1007/s00170-019-03991-w} -} - -@article{Kafa2018, - title = {Evaluating and Selecting Partners in Sustainable Supply Chain Network: A Comparative Analysis of Combined Fuzzy Multi-Criteria Approaches}, - author = {Kafa, Nadine and Hani, Yasmina and El Mhamedi, Abederrahman}, - year = {2018}, - month = mar, - journal = {OPSEARCH}, - volume = {55}, - number = {1}, - pages = {14--49}, - issn = {0030-3887}, - doi = {10.1007/s12597-017-0326-5} -} - -@article{kaffashiTransformingLowCarbon2019, - title = {Transforming to a Low Carbon Society; an Extended Theory of Planned Behaviour of {{Malaysian}} Citizens}, - author = {Kaffashi, Sara and Shamsudin, Mad Nasir}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {1255--1264}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.07.047}, - urldate = {2020-06-07}, - abstract = {The current study was conducted to explore Malaysian citizens' intention towards the adoption of behaviours that support low carbon society. An extended form of Theory of Planned Behaviour was employed to research factors influencing citizens' intentions to adopt behaviours supporting a low carbon society in five urban areas of a highly congested part of Klang Valley, Malaysia. In addition to standard variables of attitudes, subjective norm and perceived behavioural control, the study included items such as past behaviour, moral obligations, modernity acceptance, environmental concerns, and government's role. The results indicated that subjective norm has the most powerful influence on respondents' intention, followed by moral obligation, attitude and environmental concerns. Perceived behavioural control was, however, found to be insignificant. The impact of past behaviour, environmental concerns, modernity, and government's role on perceived behavioural control then suggested the importance of these factors in ease of adaptability. The results of this study add to the wealth of information on the low carbon society in Malaysia by combining different variables that are significant determinants of citizens' intention to engage in low carbon activities. It also provides an important piece of information for Malaysian policy-makers to consider for low carbon society preparation; programs such as environmental awareness, policy interventions such as subsidies, and new technologies. Overall, the results of this study make it clear that the introduction of strategies and policies in Malaysia that concentrate on social contribution of all citizens from government to businesses and households is most likely to be successful in the move towards a low carbon society.}, - keywords = {Citizens' intention,Extended theory of planned behaviour,Low carbon society,Social contribution} -} - -@article{Kahle2020, - title = {Smart {{Products}} Value Creation in {{SMEs}} Innovation Ecosystems}, - author = {Kahle, J{\'u}lia Hofmeister and Marcon, {\'E}rico and Ghezzi, Antonio and Frank, Alejandro G}, - year = {2020}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {156}, - number = {February}, - pages = {120024}, - publisher = {{Elsevier}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120024}, - urldate = {2020-04-24}, - abstract = {Technological innovations are increasing the opportunities to develop technically and economically feasible Smart Products. However, the development of Smart Products requires knowledge and capabilities that single companies usually do not possess, thus creating new opportunities for cooperation through the establishment of innovation ecosystems focused on Smart Products. Hence, this study aims at understanding possible configurations for these ecosystems by considering the required characteristics they should display to allow the development of Smart Products from their early stages. We conducted a case study in an electro-electronic and automation industrial cluster of 120 small and medium-sized enterprises (SMEs), based on 37 interviews with key participants in the ecosystem: 15 SMEs executives, 8 academics, 2 R\&D center representatives, 8 large manufacturing customers, 3 business associations and 1 state government representative. As a result, we developed a conceptual framework that presents the required characteristics of an innovation ecosystem to offer Smart Products, and discloses the relationships among these characteristics.}, - keywords = {Capabilities,Cooperation,Industry 4.0,Innovation ecosystem,Internet of things,Smart Products} -} - -@article{kahlertPlasticsRecyclingGlobal2020, - title = {Plastics Recycling after the Global Pandemic: Resurgence or Regression?}, - author = {Kahlert, Sebastian and Bening, Catharina R.}, - year = {2020}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {160}, - pages = {104948}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104948}, - urldate = {2020-05-27}, - file = {/Users/fabio/Zotero/storage/LS5E7QII/full-text.pdf} -} - -@article{kahlertWhyPledgesAlone2022, - title = {Why Pledges Alone Will Not Get Plastics Recycled: {{Comparing}} Recyclate Production and Anticipated Demand}, - author = {Kahlert, Sebastian and Bening, Catharina R.}, - year = {2022}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {181}, - pages = {106279}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106279}, - urldate = {2022-03-14} -} - -@article{Kaiser2018, - title = {Recycling of Polymer-Based Multilayer Packaging: {{A}} Review}, - author = {Kaiser, Katharina and Schmid, Markus and Schlummer, Martin}, - year = {2018}, - journal = {Recycling}, - volume = {3}, - number = {1}, - issn = {23134321}, - doi = {10.3390/recycling3010001}, - abstract = {Polymer-based multilayer packaging materials are commonly used in order to combine the respective performance of different polymers. By this approach, the tailored functionality of packaging concepts is created to sufficiently protect sensitive food products and thus obtain extended shelf life. However, because of their poor recyclability, most multilayers are usually incinerated or landfilled, counteracting the efforts towards a circular economy and crude oil independency. This review depicts the current state of the European multilayer packaging market and sketches the current end-of-life situation of postconsumer multilayer packaging waste in Germany. In the main section, a general overview of the state of research about material recycling of different multilayer packaging systems is provided. It is divided into two subsections, whereby one describes methods to achieve a separation of the different components, either by delamination or the selective dissolution\textendash reprecipitation technique, and the other describes methods to achieve recycling by compatibilization of nonmiscible polymer types. While compatibilization methods and the technique of dissolution\textendash reprecipitation are already extensively studied, the delamination of packaging has not been investigated systematically. All the presented options are able to recycle multilayer packaging, but also have drawbacks like a limited scope or a high expenditure of energy.}, - keywords = {Compatibilization,Delamination,Multilayer packaging,Recycling,Selective dissolution}, - file = {/Users/fabio/Zotero/storage/MDE487S7/Recycling of Polymer-Based Multilayer Packaging- A Review.pdf} -} - -@article{kaiserGlobalPatternsCollective2023, - title = {Global Patterns of Collective Payments for Ecosystem Services and Their Degrees of Commodification}, - author = {Kaiser, Josef and Krueger, Tobias and Haase, Dagmar}, - year = {2023}, - month = jul, - journal = {Ecological Economics}, - volume = {209}, - pages = {107816}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107816}, - urldate = {2023-05-02}, - abstract = {This study provides a novel framework for analysing PES-related degrees of ES-commodification. The framework differentiates PES programs by the extent to which ES are traded in a market-like exchange in terms of four PES design components. We apply this framework to a newly compiled global dataset of collective PES programs (C-PES). C-PES address communities and groups instead of individuals and private entities and provide voluntary, conditional incentives for ES protection. Many conservationists see potentials for supporting participation and cooperation when linking common land titles with the PES approach instead of strengthening private land tenure regimes. We identified 29 C-PES cases with clusters in Central and Southeast Africa, Central America, and Southeast Asia. Particularly C-PES programs focusing on carbon or wildlife ES reach medium to high degrees of commodification, whereas schemes targeting biodiversity, watershed, or bundled ES show rather low to medium degrees of commodification. Our framework allows for a more nuanced study of the pluralism of PES designs and lays the foundation for further research on the differentiated role of ES-commodification for social-ecological outcomes.}, - langid = {english}, - keywords = {Collective Action,Commodification,Community-Based,Land Tenure,Payments for Ecosystem Services,Privatization}, - file = {/Users/fabio/Zotero/storage/ULXEZDCI/Kaiser et al_2023_Global patterns of collective payments for ecosystem services and their degrees.pdf} -} - -@article{kakadellisFriendFoeStakeholder2021, - title = {Friend or Foe: {{Stakeholder}} Attitudes towards Biodegradable Plastic Packaging in Food Waste Anaerobic Digestion}, - author = {Kakadellis, Sarah and Woods, Jeremy and Harris, Zoe M}, - year = {2021}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {169}, - pages = {105529}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105529}, - urldate = {2021-03-08}, - file = {/Users/fabio/Zotero/storage/6FLMG3PI/full-text.pdf} -} - -@article{Kalina2020, - title = {``{{This}} Is Our next Problem'': {{Cleaning}} up from the {{COVID-19}} Response}, - author = {Kalina, Marc and Tilley, Elizabeth}, - year = {2020}, - month = may, - journal = {Waste Management}, - volume = {108}, - pages = {202--205}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.05.006}, - urldate = {2020-05-08}, - file = {/Users/fabio/Zotero/storage/23IWFQ6M/full-text.pdf} -} - -@article{Kalita2003, - title = {Development of Controlled Porosity Polymer-Ceramic Composite Scaffolds via Fused Deposition Modeling}, - author = {Kalita, Samar Jyoti and Bose, Susmita and Hosick, Howard L. and Bandyopadhyay, Amit}, - year = {2003}, - month = oct, - journal = {Materials Science and Engineering: C}, - volume = {23}, - number = {5}, - pages = {611--620}, - issn = {09284931}, - doi = {10.1016/S0928-4931(03)00052-3}, - urldate = {2015-01-01}, - keywords = {bio-composites,bone graft,fused deposition modeling,porous materials,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/ITPVC2DD/Kalita et al. - 2003 - Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling.pdf} -} - -@article{kalkalRecentAdvances3D2021, - title = {Recent Advances in {{3D}} Printing Technologies for Wearable (Bio)Sensors}, - author = {Kalkal, Ashish and Kumar, Sumit and Kumar, Pramod and Pradhan, Rangadhar and Willander, Magnus and Packirisamy, Gopinath and Kumar, Saurabh and Malhotra, Bansi Dhar}, - year = {2021}, - month = oct, - journal = {Additive Manufacturing}, - volume = {46}, - pages = {102088}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102088}, - urldate = {2021-06-10} -} - -@article{Kallio2015a, - title = {Physical Space, Culture and Organisational Creativity \textendash{} a Longitudinal Study}, - author = {Kallio, Tomi J. and Kallio, Kirsi-Mari and Blomberg, Annika Johanna}, - year = {2015}, - journal = {Facilities}, - volume = {33}, - number = {5/6}, - pages = {389--411}, - issn = {0263-2772}, - doi = {10.1108/F-09-2013-0074}, - abstract = {Purpose - The purpose of this study is to explore the potential positive effects of the design of a physical organisational environment on the emergence of an organisational culture conducive to organisational creativity. Design/methodology/approach - The study is based on an in-depth, longitudinal case study, the aim being to enhance understanding of how a change in physical space, including location, spatial organisation and architectonic details, supports cultural change. Findings - It is suggested that physical space plays an implicit yet significant role in the emergence of a culture conducive to organisational creativity. It appears from the case analysis that there are three aspects of culture in particular, equality, openness and collectivity, that may be positively affected by the design of an organisation's physical environment. Practical implications - The careful choice, planning and design of an organisation's physical location, layout and style can advance the appearance of an organisational culture conducive to creativity. Originality/value - The paper describes a longitudinal study comparing a case organisation before and after a change in its physical environment. The longitudinal data illustrates how a change in the spatial environment contributes to the emergence of a culture conducive to organisational creativity. [ABSTRACT FROM AUTHOR]}, - arxiv = {http://dx.doi.org/10.1108/BIJ-10-2012-0068}, - isbn = {0262171031}, - pmid = {42012058}, - keywords = {a longitudinal study,innovation,organisational change,organisational creativity,organizational culture,paper type case study,space} -} - -@article{kallisResearchDegrowth2018, - title = {Research {{On Degrowth}}}, - author = {Kallis, Giorgos and Kostakis, Vasilis and Lange, Steffen and Muraca, Barbara and Paulson, Susan and Schmelzer, Matthias}, - year = {2018}, - month = oct, - journal = {Annual Review of Environment and Resources}, - volume = {43}, - number = {1}, - pages = {291--316}, - issn = {1543-5938, 1545-2050}, - doi = {10.1146/annurev-environ-102017-025941}, - urldate = {2022-08-12}, - abstract = {Scholars and activists mobilize increasingly the term degrowth when producing knowledge critical of the ideology and costs of growth-based development. Degrowth signals a radical political and economic reorganization leading to reduced resource and energy use. The degrowth hypothesis posits that such a trajectory of social transformation is necessary, desirable, and possible; the conditions of its realization require additional study. Research on degrowth has reinvigorated the limits to growth debate with critical examination of the historical, cultural, social, and political forces that have made economic growth a dominant objective. Here we review studies of economic stability in the absence of growth and of societies that have managed well without growth. We reflect on forms of technology and democracy compatible with degrowth and discuss plausible openings for a degrowth transition. This dynamic and productive research agenda asks inconvenient questions that sustainability sciences can no longer afford to ignore.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/7F5C2ZVS/Kallis et al. - 2018 - Research On Degrowth.pdf} -} - -@article{kalmykovaCircularEconomyReview2018, - title = {Circular Economy - {{From}} Review of Theories and Practices to Development of Implementation Tools}, - author = {Kalmykova, Yuliya and Sadagopan, Madumita and Rosado, Leonardo}, - year = {2018}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {135}, - pages = {190--201}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/J.RESCONREC.2017.10.034}, - urldate = {2022-03-13}, - abstract = {The paper provides an overview of the literature on Circular Economy (CE) theoretical approaches, strategies and implementation cases. After analyzing different CE approaches and the underlying principles the paper then proceeds with the main goal of developing tools for CE implementation. Two tools are presented. The first is a CE Strategies Database, which includes 45 CE strategies that are applicable to different parts of the value chain. The second is a CE Implementation Database, which includes over 100 case studies categorized by Scope, Parts of the Value Chain that are involved, as well as by the used Strategy and Implementation Level. An analysis of the state of the art in CE implementation is also included in the paper. One of the observations from the analysis is that while such Parts of the Value Chain as Recovery/Recycling and Consumption/Use are prominently featured, others, including Manufacturing and Distribution, are rarely involved in CE. On the other hand, the Implementation Levels of the used Strategies indicate that many market-ready solutions exist already. The Scope of current CE implementation considers selected products, materials and sectors, while system changes to economy are rarely suggested. Finally, the CE monitoring methods and suggestions for future development are also discussed in this paper. The analysis of the theoretical approaches can serve as an introduction to CE concept, while the developed tools can be instrumental for designing new CE cases.}, - keywords = {Circular economy development,Circular economy example,Circular economy implementation,Circular economy strategy,Cleaner production,Closed loop,Cradle to cradle,Green supply chain,Industrial ecology,Performance economy,Recycling,Steady-state economy,Stock optimization,Sustainable resource use,Value maximization}, - file = {/Users/fabio/Zotero/storage/UKKTMHHG/full-text.pdf} -} - -@article{Kamaruddin2017, - title = {Potential Use of {{Plastic Waste}} as {{Construction Materials}}: {{Recent Progress}} and {{Future Prospect}}}, - author = {Kamaruddin, M A and Abdullah, M M A and Zawawi, M H and Zainol, M R R A}, - year = {2017}, - journal = {IOP Conference Series: Materials Science and Engineering}, - volume = {267}, - pages = {012011}, - issn = {1757-8981}, - doi = {10.1088/1757-899X/267/1/012011}, - file = {/Users/fabio/Zotero/storage/JQUTIG76/Potential use of Plastic Waste as Construction Materials- Recent Progress and Future Prospect .pdf} -} - -@article{Kaminsky1976, - title = {Recycling of Plastics}, - author = {Kaminsky, W. and Menzel, J. and Sinn, H.}, - year = {1976}, - month = jan, - journal = {Conservation \& Recycling}, - volume = {1}, - number = {1}, - pages = {91--110}, - issn = {03613658}, - doi = {10.1016/0361-3658(76)90009-6}, - file = {/Users/fabio/Zotero/storage/SKWFUMF8/Recycling of plastics.pdf} -} - -@article{Kamleitner2017, - title = {Long Chain Branching as an Innovative Up-Cycling Process of Polypropylene Post-Consumer Waste \textendash{} {{Possibilities}} and Limitations}, - author = {Kamleitner, Florian and Duscher, Bernadette and Koch, Thomas and Knaus, Simone and Archodoulaki, Vasiliki-Maria}, - year = {2017}, - month = oct, - journal = {Waste Management}, - volume = {68}, - pages = {32--37}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2017.07.022} -} - -@article{kamolsEngagementTheatreChallenging2021, - title = {Beyond Engagement Theatre: Challenging Institutional Constraints of Participatory Planning Practice}, - author = {Kamols, Nicholas and Foth, Marcus and Guaralda, Mirko}, - year = {2021}, - journal = {Australian Planner}, - volume = {57}, - number = {1}, - pages = {23--35}, - publisher = {{Routledge}}, - issn = {21506841}, - doi = {10.1080/07293682.2021.1920993}, - urldate = {2022-03-13}, - abstract = {Institutional realities often limit participatory planning practice from reaching its full potential. Rather than continuing to improve participatory approaches and methods in isolation, we studied whether there is merit in extending the repertoire of planning knowledge and skills to encompass a focus on the broader institutional decision-making processes. By interviewing a diverse range of experts working in the Queensland planning context, the research sought to understand different types of clashes between participatory planning practices and institutional cultures. Interviewees shared their personal experiences and strategies that helped them traverse institutional processes and constraints. This confirmed that there is already a wealth of tacitly held skills, which have not yet been formalised. Our data analysis found that planning practice may be improved by attenuating the disparity between external messaging and internal practices, and by enabling planning practitioners to better utilise informal institutional structures. Intermediation is proposed as a skillset to formalise planners' tacitly held interpersonal and political literacy and acumen, and equip them to better navigate and negotiate institutional structures and constraints.}, - keywords = {community engagement,consultation,design thinking,institutional culture,institutioning,intermediation,Participatory planning,tokenism} -} - -@article{Kamoun2011, - title = {Plan d'exp\'erience et Traitements de Surface - {{\'Etude}} Quantitative Des Effets et Interactions}, - author = {Kamoun, Amel and Chaabouni, Mohamed Moncef and Ayedi, Hassine Ferid}, - year = {2011}, - journal = {Techniques de l'ingenieur}, - volume = {33}, - number = {0}, - file = {/Users/fabio/Zotero/storage/VK72DN3Z/Plan d'expérience et traitements de surface - Étude quantitative des effets et interactions.pdf} -} - -@book{Kamrani2006, - title = {Rapid {{Prototyping}}}, - author = {Kamrani, Ali K}, - editor = {Kamrani, Ali and Nasr, Emad Abouel}, - year = {2006}, - volume = {6}, - publisher = {{Kluwer Academic Publishers}}, - address = {{Boston}}, - doi = {10.1007/b101140}, - urldate = {2015-02-11}, - isbn = {0-387-23290-7}, - file = {/Users/fabio/Zotero/storage/XDXKKP58/Kamrani - 2006 - Rapid Prototyping.pdf} -} - -@article{kanabenja3DPrintingFilaments2022, - title = {{{3D}} Printing Filaments from Plasticized {{Polyhydroxybutyrate}}/{{Polylactic}} Acid Blends Reinforced with Hydroxyapatite}, - author = {Kanabenja, Warrayut and Passarapark, Kunanon and Subchokpool, Thanaporn and Nawaaukkaratharnant, Nithiwach and Rom{\'a}n, Allen Jonathan and Osswald, Tim A. and Aumnate, Chuanchom and Potiyaraj, Pranut}, - year = {2022}, - month = nov, - journal = {Additive Manufacturing}, - volume = {59}, - pages = {103130}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2022.103130}, - urldate = {2022-09-18}, - abstract = {This research focused on the fabrication of bio-composite filament from polymer blending between Polyhydroxybutyrate (PHB) and Polylactic acid (PLA) while using hydroxyapatite (HA) and polypropylene glycol (PPG) as a reinforcing agent and plasticizer, respectively, targeting to be an alternative material used in 3D printing utilization stead of using commercial PLA. PHB/PLA blend containing 10, 20, and 30 phr HA, with equal PPG content were prepared using a melt-extrusion process via a twin-screw extruder. Herein, the thermal properties and flowability were investigated to optimize the 3D printing conditions. The results showed that adding PPG improved the processability during the filament extrusion and 3D printing process. The bio-composite with 10 phr HA and 10 phr PPG (HA-PPG 11) showed a consistent flow, leading to an excellent 3D printability, however, the flowability decreased with an increase in HA loading. Furthermore, the morphological and mechanical properties of the 3D printed specimens were characterized. Mechanical testing exhibited that HA-PPG 11 occupied excellent mechanical properties, which included impact strength (1.85~kJ/m2), flexural modulus (3.20~GPa), and flexural stress at 2\% strain (42.5~MPa); especially, elongation at break which higher than commercial PLA, all of which are attributed to the high-level of HA dispersion within the bio-composite.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/LLHP336M/S221486042200519X.html} -} - -@article{kandaConceptualisingSystemicActivities2020, - title = {Conceptualising the Systemic Activities of Intermediaries in Sustainability Transitions}, - author = {Kanda, Wisdom and Kuisma, Mika and Kivimaa, Paula and Hjelm, Olof}, - year = {2020}, - month = sep, - journal = {Environmental Innovation and Societal Transitions}, - volume = {36}, - pages = {449--465}, - publisher = {{Elsevier B.V.}}, - issn = {22104224}, - doi = {10.1016/j.eist.2020.01.002}, - urldate = {2022-03-13}, - abstract = {This article contributes to the literature on sustainability transitions, innovation systems, and eco-innovation by addressing conceptual challenges regarding the systemic activities of intermediaries. Specifically, the article addresses a research gap pertaining to the ways in which the systemic activities of (eco-)innovation intermediaries can be conceptualised and empirically demonstrated. Empirically, the paper examines selected intermediaries in the context of support systems for eco-innovators in three regions across Finland, Germany, and Sweden. Drawing from our empirical findings and the literature on intermediaries, we conceptualise three system levels within which intermediation occurs: (i) in-between entities in a network, (ii) in-between networks of entities, and (iii) in-between actors, networks, and institutions. Our discussion suggests a heterogeneity of roles that individual intermediaries take at multiple system levels, complementing an emerging, more nuanced perspective of intermediaries in sustainability transitions. Thus, we suggest the term systemic intermediation for describing the system-level activities of intermediaries.}, - keywords = {Eco-innovation,Eco-innovation intermediaries,Sustainability transitions,Systemic intermediation} -} - -@article{kandaTechnologicalInnovationSystems2019, - title = {A Technological Innovation Systems Approach to Analyse the Roles of Intermediaries in Eco-Innovation}, - author = {Kanda, Wisdom and del R{\'i}o, Pablo and Hjelm, Olof and Bienkowska, Dzamila}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {227}, - pages = {1136--1148}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.230}, - urldate = {2022-03-13}, - abstract = {The literature on intermediaries faces challenges regarding how to conceptualise and empirically demonstrate the system-level impact of intermediaries. Thus, researchers and policy analysts may experience difficulties in grasping the potential contributions of intermediaries beyond individual projects and firms to aggregate levels of an innovation system. This article combines innovation intermediary and technological innovation systems literature to develop fundamentals of an approach for analysing how organisations acting as intermediaries support firms in eco-innovation and potentially contribute to technological innovation system functions. The operationalisation of the analytical approach is illustrated using case studies on a total of eight support organisations acting as intermediaries in the region of Scania, Sweden and North Rhine Westphalia, Germany. For researchers and policy analysts, the analytical approach presented in this article offers the opportunity for a step-by-step, comprehensive and transparent analysis of different types of intermediaries, their roles, and potential contributions to innovation system functions.}, - keywords = {Circular economy,Eco-innovation intermediaries,Impact assessment,Intermediation,Sustainability transitions} -} - -@article{kandukuriInventiveSolutionsRemanufacturing2021, - title = {Inventive Solutions for Remanufacturing Using Additive Manufacturing: {{ETRIZ}}}, - author = {Kandukuri, Srujana and G{\"u}nay, Elif El{\c c}in and {Al-Araidah}, Omar and Okudan Kremer, G{\"u}l E.}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {126992}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126992}, - urldate = {2021-04-29} -} - -@article{kanEnvironmentalImpactsPlastic2022, - title = {Environmental Impacts of Plastic Packaging of Food Products}, - author = {Kan, Mengqing and Miller, Shelie A}, - year = {2022}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {180}, - pages = {106156}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106156}, - urldate = {2022-01-25} -} - -@article{Kang2020, - title = {Electronic Waste Collection Systems Using {{Internet}} of {{Things}} ({{IoT}}): {{Household}} Electronic Waste Management in {{Malaysia}}}, - author = {Kang, Kai Dean and Kang, Harnyi and Ilankoon, I.M.S.K. and Chong, Chun Yong}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {252}, - pages = {119801}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.119801}, - file = {/Users/fabio/Zotero/storage/YUQPXIJL/Electronic waste collection systems using Internet of Things (IoT)- Household electronic waste management in Malaysia.pdf} -} - -@article{kang3DBioprintingSystem2016, - title = {A {{3D}} Bioprinting System to Produce Human-Scale Tissue Constructs with Structural Integrity}, - author = {Kang, Hyun-Wook and Jin Lee, Sang and Kab Ko, In and {KenglaCarlos} and J Yoo, James and Atala, Anthony}, - year = {2016}, - journal = {Nature Biotechnology}, - volume = {34}, - pages = {312--319}, - abstract = {A challenge for tissue engineering is producing three-dimensional (3D), vascularized cellular constructs of clinically relevant size, shape and structural integrity. We present an integrated tissue\textendash organ printer (ITOP) that can fabricate stable, human-scale tissue constructs of any shape. Mechanical stability is achieved by printing cell-laden hydrogels together with biodegradable polymers in integrated patterns and anchored on sacrificial hydrogels. The correct shape of the tissue construct is achieved by representing clinical imaging data as a computer model of the anatomical defect and translating the model into a program that controls the motions of the printer nozzles, which dispense cells to discrete locations. The incorporation of microchannels into the tissue constructs facilitates diffusion of nutrients to printed cells, thereby overcoming the diffusion limit of 100\textendash 200 {$\mu$}m for cell survival in engineered tissues. We demonstrate capabilities of the ITOP by fabricating mandible and calvarial bone, cartilage and skeletal muscle. Future development of the ITOP is being directed to the production of tissues for human applications and to the building of more complex tissues and solid organs.} -} - -@article{kanger2022, - title = {Deep Transitions: {{A}} Mixed Methods Study of the Historical Evolution of Mass Production}, - shorttitle = {Deep Transitions}, - author = {Kanger, Laur and Bone, Fr{\'e}d{\'e}rique and Rotolo, Daniele and Steinmueller, W. Edward and Schot, Johan}, - year = {2022}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {177}, - pages = {121491}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.121491}, - urldate = {2022-09-28}, - abstract = {Industrial societies contain a range of socio-technical systems fulfilling functions such as the provision of energy, food, mobility, housing, healthcare, finance and communications. The recent Deep Transitions (DT) framework outlines a series of propositions on how the multi-system co-evolution over 250 years of these systems has contributed to several current social and ecological crises. Drawing on evolutionary institutionalism, the DT framework places a special emphasis on the concepts of `rules' and `meta-rules' as coordination mechanisms within and across socio-technical systems. In this paper, we employ a mixed-method approach to provide an empirical assessment of the propositions of the DT framework. We focus on the historical evolution of mass production from the 18th century to the present. Combining a qualitative narrative based on a synthesis of secondary historical literature with a quantitative text mining-based analysis of the corpus of Scientific American (1845\textendash 2019), we map the emergence and alignment of rules underpinning mass production. Our study concludes by reflecting on important methodological lessons for the application of text mining techniques to examine large-scale and long-term socio-technical dynamics.}, - langid = {english}, - keywords = {Deep transitions,Historical sources,Mass production,Mixed methods,Rules,Socio-technical systems,Text mining}, - file = {/Users/fabio/Zotero/storage/CISIY4NV/Kanger et al_2022_Deep transitions.pdf;/Users/fabio/Zotero/storage/VRMVAGGY/S0040162522000233.html} -} - -@article{kangerSixPolicyIntervention2020, - title = {Six Policy Intervention Points for Sustainability Transitions: {{A}} Conceptual Framework and a Systematic Literature Review}, - author = {Kanger, Laur and Sovacool, Benjamin K. and Noork{\~o}iv, Martin}, - year = {2020}, - month = sep, - journal = {Research Policy}, - volume = {49}, - number = {7}, - pages = {104072}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104072}, - urldate = {2020-07-14} -} - -@article{kangMinimalismSustainableLifestyle2021, - title = {Minimalism as a {{Sustainable Lifestyle}}: {{Its Behavioral Representations}} and {{Contributions}} to {{Emotional Well-Being}}}, - author = {Kang, Jiyun and Martinez, Cosette M. Joyner and Johnson, Catherine}, - year = {2021}, - month = feb, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {802--813}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.02.001}, - urldate = {2021-02-14} -} - -@article{kangUrbanEcosystemServices2020, - title = {Urban {{Ecosystem Services}}: {{A Review}} of the {{Knowledge Components}} and {{Evolution}} in the 2010s}, - author = {Kang, Wanmo and Chon, Jinhyung and Kim, Gowoon}, - year = {2020}, - month = nov, - journal = {Sustainability 2020, Vol. 12, Page 9839}, - volume = {12}, - number = {23}, - pages = {9839}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {20711050}, - doi = {10.3390/SU12239839}, - urldate = {2021-12-13}, - abstract = {In an effort to reconnect urban populations to the biosphere, which is an urgent task to ensure human sustainability, the concept of urban ecosystem services (UES) has recently garnered scholarly and political attention. With an aim to examine the emerging research trends and gaps in UES, we present an up-to-date, computer-based meta-analysis of UES from 2010 to 2019 by implementing a keyword co-occurrence network (KCN) approach. A total of 10,247 author keywords were selected and used to analyze undirected and weighted networks of these keywords. Specifically, power-law distribution fitting was performed to identify overall UES keyword trends, and clusters of keywords were examined to understand micro-level knowledge trends. The knowledge components and structures of UES literature exhibited scale-free network characteristics, which implies that the KCN of the UES throughout the 2010s was dominated by a small number of keywords such as \“urbanization\”, \“land use and land cover\”, \“urban green space\” and \“green infrastructure\”. Finally, our findings indicate that knowledge of stakeholder involvement and qualitative aspects of UES are not as refined as spatial UES approaches. The implications of these knowledge components and trends are discussed in the context of urban sustainability and policy planning.}, - keywords = {free network,keyword co,occurrence network,scale,sustainability,urban ecosystem services,urbanization}, - file = {/Users/fabio/Zotero/storage/TY468TAY/full-text.pdf} -} - -@article{Kannan2012a, - title = {A Carbon Footprint Based Reverse Logistics Network Design Model}, - author = {Kannan, Devika and Diabat, Ali and Alrefaei, Mahmoud and Govindan, Kannan and Yong, Geng}, - year = {2012}, - journal = {Resources, Conservation and Recycling}, - volume = {67}, - pages = {75--79}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2012.03.005}, - abstract = {Due to the environmental legislation and regulations, manufacturing firms have realized the importance of adopting environmental friendly supply chain management (SCM) practices. In this paper, a mixed integer linear model is developed for a carbon footprint based reverse logistics network design. The proposed model aims at minimizing climate change (specifically, the CO 2 footprint), and it employs reverse logistics activities to recover used products, hence combining the location/transportation decision problem. The proposed model is validated by examining a case study from the plastic sector. \textcopyright{} 2012 Elsevier B.V. All rights reserved.}, - isbn = {0921-3449}, - keywords = {Carbon footprint,Case study,Greenhouse emissions,Reverse logistics}, - file = {/Users/fabio/Zotero/storage/9D3HGAQX/A carbon footprint based reverse logistic.pdf} -} - -@article{kanSevenDecadesPlastic, - title = {Seven Decades of Plastic Flows and Stocks in the {{United States}} and Pathways toward Zero Plastic Pollution by 2050}, - author = {Kan, Mengqing and Wang, Chunyan and Zhu, Bing and Chen, Wei-Qiang and Liu, Yi and Ren, Yucheng and Xu, Ming}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13427}, - urldate = {2023-08-31}, - abstract = {The United States is the world's second-largest producer and consumer of plastics and the largest producer of plastic waste. Understanding the sources, drivers, and destinations of plastic production, consumption, and waste is critical for the United States to develop strategies toward a zero-plastic pollution future. Here, we characterize the dynamic material flows and stocks of plastics in the United States for nearly seven decades (1950\textendash 2018) and project the future trajectories until 2050 under various scenarios on the basis of reduce, reuse, and recycle to explore pathways toward zero plastic pollution. Our estimation shows that 1479 MMt plastics were produced in the United States from 1950 to 2018, 75 MMt waste plastics were domestically recycled, 139 MMt virgin polymers were exported, and 9 MMt recycled waste plastics were imported. Currently, about 326 MMt of plastics still remain in the society as in-use stock, most of which (63\%) are in the construction sector. Plastic pollution would almost double from 37 MMt in 2018 to 86 MMt in 2050 if current consumption pattern and waste management remain unchanged. Single strategies (i.e., plastic bag ban and extended lifespan) could only contribute limited reductions (2\%\textendash 12\%) of plastics pollution, and would not be able to reverse the increasing trajectory of plastic pollution until 2050. Additional measures are needed, such as improving recycling and avoiding landfilling of plastic waste. Our analysis can provide critical insights to help the United States develop long-term strategies to mitigate and eliminate plastic pollution.}, - copyright = {\textcopyright{} 2023 by the International Society for Industrial Ecology.}, - langid = {english}, - keywords = {flows and stocks,industrial ecology,mitigation pathways,plastic waste,zero plastic pollution}, - file = {/Users/fabio/Zotero/storage/8RD9HFXT/jiec.html} -} - -@article{kantInnovationIntermediariesWhat2019, - title = {Innovation Intermediaries: {{What}} Does It Take to Survive over Time?}, - author = {Kant, Marvin and Kanda, Wisdom}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {229}, - pages = {911--930}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/J.JCLEPRO.2019.04.213}, - urldate = {2022-03-13}, - abstract = {Innovation intermediaries are recognised as crucial actors that can facilitate the innovation process, support eco-innovation and contribute to sustainable entrepreneurship. However, little is known about the temporal dimension of innovation intermediaries and how they change over time to survive, which is crucial if intermediaries are to contribute to long term sustainability-oriented transformations. An in-depth case study design with a comparative approach was chosen to examine four innovation intermediaries at different development stages in the related fields of CO2 utilisation and Carbon Capture Storage technology in Europe, the USA, and Australia. This study sheds light on the survival of innovation intermediaries over time: Firstly, by describing the dynamics in an intermediary's (a) characteristics, (b) scope, (c) objectives, and (d) roles and activities. Secondly, by identifying at least four interrelated factors influencing an intermediary's survival: (i) neutrality, (ii) technological context, (iii) shared consensus, and (iv) internal value creation. Thus, this article contributes to the literature by highlighting the complexity and tensions in the survival of intermediaries through an analysis of both internal and contextual factors, as opposed to previous literature which has mainly focused on how intermediaries change their roles and activities over time to survive.}, - keywords = {CCS,CO2 utilisation,{Intermediaries, Intermediation},Sustainability-oriented innovation,Sustainable entrepreneurship} -} - -@article{Kaplan2021, - title = {Designing {{Participatory Technology Assessments}}: {{A Reflexive Method}} for {{Advancing}} the {{Public Role}} in {{Science Policy Decision-making}}}, - author = {Kaplan, Leah R and Farooque, Mahmud and Sarewitz, Daniel and Tomblin, David}, - year = {2021}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {171}, - pages = {120974}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120974}, - urldate = {2021-07-05}, - abstract = {Decades of social science scholarship have documented and explored the interconnected nature of science, technology, and society. Multiple theoretical frameworks suggest the potential to direct this process of mutual shaping toward desired outcomes and away from undesired ones through broader inclusion of new voices and visions. In 2010, a group of researchers, educators, and policy practitioners established the Expert and Citizen Assessment of Science and Technology (ECAST) network to operationalize these frameworks. Over the course of a decade, ECAST developed an innovative and reflexive participatory technology assessment (pTA) method to support democratic science policy decision-making in different technical, social, and political contexts. The method's reflexive nature gave rise to continuous innovations and iterative improvements. The current ECAST pTA method includes three participatory phases: 1) Problem Framing; 2) ECAST Citizen Deliberation; and 3) Results and Integration. Proving adaptable and replicable, the method has generated outputs for decision-making on a variety of science and technology issues and at governance scales ranging from the local to the national and international. ECAST's distributed network model has also promoted independence, continuity, and sustainability through changing sociopolitical contexts. In this paper, we detail the current state of the ECAST pTA method; share mini case studies to illustrate circumstances that prompted new method innovations; and offer a vision for further developing and integrating pTA into democratic science policy decision-making.}, - keywords = {Citizen deliberation,Decision-making,Participatory technology assessment (pTA),Reflexivity,Responsible innovation}, - file = {/Users/fabio/Zotero/storage/KGXK7P6X/full-text.pdf} -} - -@article{Kapoor2020, - title = {Progress and Setbacks: {{The}} Two Faces of Technology Emergence}, - author = {Kapoor, Rahul and Klueter, Thomas}, - year = {2020}, - month = feb, - journal = {Research Policy}, - volume = {49}, - number = {1}, - pages = {103874}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103874} -} - -@article{Karakilic2019, - title = {Rethinking Intellectual Property Rights in the Cognitive and Digital Age of Capitalism: {{An}} Autonomist {{Marxist}} Reading}, - author = {Karakilic, E.}, - year = {2019}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {147}, - pages = {1--9}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.06.007}, - urldate = {2020-05-21}, - abstract = {The transition from industrial capitalism to cognitive capitalism and the rise of the digital revolution have brought the subject of intellectual property rights to the forefront as a controversial issue. This paper holds that the theoretical apparatus and concepts belonging to the industrial phase of capitalism largely fall short with respect to the repercussions that intellectual property rights regime yields. Embracing the methodological precept that social theory must be moulded in order to address the contours of contemporary social reality, this paper engages in an autonomist Marxist update on the concept of intellectual property rights. It ultimately challenges the ``intellectual property rights are a socio-economic need'' thesis and speculatively argues that the current system of intellectual property rights, directed politically towards the enclosure of commons, constitutes a structural contradiction by i) forming a basis for a social crisis in terms of the established relations of production, and ii) curtailing a part of the socio-economic opportunities for innovation, profit-making, and growth.}, - keywords = {Autonomist Marxism,Cognitive capitalism,Digital revolution,Immaterial production,Intellectual property rights,The common} -} - -@article{Karaylan2021, - ids = {karayilan2021}, - title = {Prospective Evaluation of Circular Economy Practices within Plastic Packaging Value Chain through Optimization of Life Cycle Impacts and Circularity}, - author = {Karay{\i}lan, Sevde and Y{\i}lmaz, {\"O}zge and Uysal, {\c C}{\i}nar and Naneci, Serkan}, - year = {2021}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {173}, - pages = {105691}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105691}, - urldate = {2021-06-15} -} - -@article{kareemPowerDynamicsTransdisciplinary2022, - title = {Power Dynamics in Transdisciplinary Research for Sustainable Urban Transitions}, - author = {Kareem, Buyana and McClure, Alice and Walubwa, Jacqueline and Koranteng, Kweku and Mukwaya, Paul Isolo and Taylor, Anna}, - year = {2022}, - month = may, - journal = {Environmental Science \& Policy}, - volume = {131}, - pages = {135--142}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.02.001}, - urldate = {2022-03-07}, - abstract = {Transdisciplinary Research (TDR) fosters collaboration amongst stakeholders from different academic disciplines and sectors of society, to jointly search for solutions to complex challenges including rapid urbanization. In order to enhance collaboration and ensure reciprocity of expertize amongst stakeholders, flattening the hierarchy of power is critical for working together to develop research agendas and experiment solutions. However, context dependent research on power dynamics in TDR is still limited and yet it is one of the conditions for understanding how to optimize the value and relevance of TDR in transitions to sustainable cities. This paper sheds light on power dynamics in TDR, using a qualitative analysis of case studies in the cities of Accra (Ghana), Durban (South Africa) and Nairobi (Kenya). Learnings from the case studies suggest that researchers should not overstate expert terminologies and illuminate the controversies that stem from stark differences in their methodological domains, during interfaces with stakeholders from policy and local communities, as this can dent the societal credibility and inclusiveness of the TDR process. Secondly, it is important to seize the potential of creating joint learning platforms using micro-level solutions in informal settlements, since it empowers local community representatives to assert themselves as co-researchers with legitimate perspectives on how the research agenda can be reshaped. Local-level solutions also provide scientific and policy windows for discerning expert biases in approaches used by academics and policy-makers to presuppose what can be done about the situation of under-privileged communities, which is key in building consensus when setting the research agenda.}, - keywords = {Power,Sustainability,Transdisciplinarity,Transitions,Urbanisation}, - file = {/Users/fabio/Zotero/storage/QB9E9ATK/full-text.pdf} -} - -@incollection{Karlsson2004, - title = {Recycled {{Polyolefins}}. {{Material Properties}} and {{Means}} for {{Quality Determination}}}, - booktitle = {Advances in Polymer Science}, - author = {Karlsson, Sigbritt}, - year = {2004}, - volume = {169}, - pages = {201--230}, - issn = {00653195}, - doi = {10.1007/b94173}, - abstract = {Recycling of polymers has come to be a necessary part of the development of a sustainable society. Recycling of low price bulk polymers, to which group the polyolefins belong, is seen by many as a waste of time and resources when they simply may be energy recovered. Several life-cycle assessments (LCA) have, however, proven that it is also valuable to material recycle bulk polymers such as polyolefins. In many instances, polyolefins are in-plant recycled and used again in similar products, but they may also be separated and sorted from municipal solid waste. This paper will discuss recycled polyolefins, in particular their change in material properties and how to characterise these properties and show that these analyses are a basis for quality determination. In fact, an important vehicle for the success of recycled polymeric materials is to use a quality concept. Accurate determination of a series of polymeric properties will be the only way recycled polymeric materials can compete with virgin ones. Analytical methods useful in the quality concept are presented and discussed. In particular, three parameters are important for quality measurements. These are degree of degradation, polymer composition and presence of low molecular weight compounds (degradation products of polymer matrix and additives, initiator/catalysts, solvents, use-related e.g. fragrance or flavour etc.). For the future it is important to give recycled polymeric materials status as resources besides the fossil and renewable ones.}, - isbn = {978-3-540-40769-0}, - keywords = {chromatography,degree of degradation,dsc,low molecular weight compounds,mae,multivariate modelling,nir,polymer composition,polyolefins,quality,recycling,recycling as resources}, - file = {/Users/fabio/Zotero/storage/YA5UBCBA/Karlsson - 2004 - Recycled Polyolefins. Material Properties and Means for Quality Determination.pdf} -} - -@article{Karlsson2004a, - title = {Quality {{Assessments}} of {{Recycled Plastics}} by {{Spectroscopy}} and {{Chromatography}}}, - author = {Karlsson, Sigbritt}, - year = {2004}, - journal = {Chromatographia}, - volume = {59}, - pages = {101--106}, - issn = {16121112}, - doi = {10.1365/s10337-003-0133-4}, - file = {/Users/fabio/Zotero/storage/LE4SHDXA/Quality Assessments of Recycled Plastics by Spectroscopy and Chromatography (2004).pdf} -} - -@article{Karpudewan2019, - title = {The Relationships between Values, Belief, Personal Norms, and Climate Conserving Behaviors of {{Malaysian}} Primary School Students}, - author = {Karpudewan, Mageswary}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117748}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117748}, - urldate = {2020-05-21}, - abstract = {Climate change is a daunting phenomenon that requires serious and urgent attention from various stakeholders. The severity of the extreme weather changes has urged the weather and climate to be an integral part of mainstream education. However, the aim of the contemporary climate change education in cultivating behavioral change is in vain. This is because the physiological concerns that explain the behavior were ignored in designing the curriculum. This notion has prompted the researcher to determine the relationship between values, belief, personal norms, and climate change behaviors and subsequently model the climate conservation behaviors. For this purpose, a survey questionnaire was administered to 300 Year 5 and Year 6 primary school students. The questionnaire consisted of items measured on values, belief, personal norms, and climate conserving behaviors. The data was then analyzed using Partial Least Square-Structural Equation approach. The findings revealed that there were significant positive relationships between values and belief; values and personal norms; values and behavior; belief and personal norms; belief and behaviors; and personal norms and behaviors. The Goodness of Fit index indicated that the overall model has excellent exploratory power in comparison to the baseline values. The model offers a guide in designing climate change curriculum and training the teachers in teaching about climate change in primary schools.}, - keywords = {Belief,Climate conservation behaviors,Personal norms,Primary education,Value-belief-norm theory,Values} -} - -@article{Karrasch2022, - title = {Integrating Knowledge within and between Knowledge Types in Transdisciplinary Sustainability Research: {{Seven}} Case Studies and an Indicator Framework}, - author = {Karrasch, L. and Grothmann, T. and Michel, T. A. and Wesselow, M. and Wolter, H. and Unger, A. and Wegner, A. and Giebels, D. and Siebenh{\"u}ner, B.}, - year = {2022}, - month = may, - journal = {Environmental Science and Policy}, - volume = {131}, - pages = {14--25}, - publisher = {{Elsevier}}, - issn = {18736416}, - doi = {10.1016/j.envsci.2022.01.014}, - urldate = {2022-02-09}, - abstract = {Transdisciplinary research aims to generate knowledge through science-practice interactions and is attracting increasing attention in sustainability science. However,sustainable development is characterized by vast complexities and context specificities, with a broad spectrum of relevant actors. Transdisciplinary research projects targeting at socio-ecological transformations, therefore, require the integration of different bodies of knowledge from diverse actors to gain an accurate and comprehensive understanding of existing problems and potential solutions. This knowledge integration involves both the active exchange of knowledge and the creation of a joint understanding of problems and solutions. Hence, the focus of this article is to analyse how and why knowledge integration is successful in transdisciplinary research processes. We conceptualize and define knowledge types and goals of knowledge integration. By analysing seven transdisciplinary research projects, we develop and empirically test indicators for knowledge integration. We examine knowledge integration (i) within three specific knowledge types (systems, target, and transformative knowledge), and (ii) between these different knowledge types. Furthermore, we reflect on the roles of researchers and non-academic actors. The description, comparison and discussion of knowledge integration lead to the identification of barriers and success factors to improve such processes in transdisciplinary research activities.}, - keywords = {Case study analyses,Evaluation,Knowledge integration,Participation,Transdisciplinary research} -} - -@article{Kasavan2021, - title = {Plastic Pollution in Water Ecosystems: {{A}} Bibliometric Analysis from 2000 to 2020}, - author = {Kasavan, Saraswathy and Yusoff, Sumiani and Rahmat Fakri, Mohd Fadhli and Siron, Rusinah and Fadhli, Mohd and Fakri, Rahmat and Siron, Rusinah}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {313}, - pages = {127946}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127946}, - urldate = {2021-06-21}, - keywords = {Bibliometric analysis}, - file = {/Users/fabio/Zotero/storage/5JDT5JY7/Kasavan et al. - 2021 - Plastic pollution in water ecosystems A bibliometric analysis from 2000 to 2020.pdf} -} - -@article{Kasmi2020, - title = {Industrial {{Symbiosis}} and {{Territorial Development}}: {{The Cross-Fertilization}} of {{Proximity Dynamics}} and the {{Role}} of {{Information}} and {{Knowledge Flows}}}, - author = {Kasmi, Fedoua}, - year = {2020}, - journal = {Journal of the Knowledge Economy}, - publisher = {{Journal of the Knowledge Economy}}, - issn = {18687873}, - doi = {10.1007/s13132-020-00631-7}, - abstract = {Industrial regions, specialized in heavy industry, currently face many challenges, due to their strong specialization (job losses, closure of plants, etc.) and are looking for new paths of diversification. Industrial ecology can be an engine of this diversification: the industrial symbiosis generated by its implementation is a source of positive externalities stemming from the articulation of geographical, organizational, and cognitive proximities. These externalities strengthen territorial attractiveness and favor the development of a related variety. Using a mixed methodology including the constitution and analysis of database and interviews, we study the case of Dunkirk, pioneer city in France for the implementation of industrial ecology. The empirical results show that the new companies are linked to local ones through eco-industrial synergies. These synergies can be, through the flows of information and knowledge, a source of the emergence of new markets and innovative technologies and thus induce territorial development.}, - isbn = {1313202000631}, - keywords = {Industrial symbiosis,Information,Knowledge,Proximity,Related variety,Territorial development}, - file = {/Users/fabio/Zotero/storage/RF9GXK62/Industrial Symbiosis and Territorial Development- The Cross-Fertilization of Proximity Dynamics and the Role of Information and Knowledge Flows.pdf} -} - -@article{Kasmi2021, - title = {Innovation {{Spaces}} as {{Drivers}} of {{Eco-innovations Supporting}} the {{Circular Economy}}: {{A Systematic Literature Review}}}, - author = {Kasmi, Fedoua and Osorio, Ferney and Dupont, Laurent and Marche, Brunelle and Camargo, Mauricio}, - year = {2021}, - month = dec, - journal = {Journal of Innovation Economics \& Management}, - volume = {Pr\'epublica}, - number = {0}, - pages = {Ij-XLII}, - issn = {2032-5355}, - doi = {10.3917/jie.pr1.0113}, - abstract = {This paper explores the way in which academics address the role of innovation spaces in the development of the circular economy. Considering their characteristics, objectives, and functioning, we assume that innovation spaces can be favorable environments for eco-innovations facilitating the implementation of circular economy strategies. To examine this hypothesis, this paper mobilizes a mixed research method based on bibliometric analysis of keywords and content analysis. The results show that these collaborative environments can: foster sustainable experimental learning, provide methodologies and tools for the co-creation of circular solutions, drive the transition toward sustainable smart cities, foster the creation of new sustainable business models, promote sustainable urban entrepreneurship, and facilitate knowledge exchange on circular solutions. However, most of the reviewed literature focuses mainly on their impacts on sustainability and less on the concept of the circular economy per se. Consequently, this work provides insights on the potential of these spaces in the circular strategies' implementation.}, - file = {/Users/fabio/Zotero/storage/N5UIPNPK/JIE_PR1_0113 (1).pdf} -} - -@article{kasmiEcologieIndustrielleMilieu2017, - title = {Ecologie Industrielle, Milieu Innovateur et Gouvernance Territoriale, Revue Canadienne Des Sciences R\'egionales 40 (2), 103-113}, - author = {Kasmi, Fedoua and Laperche, Blandine and Burmeister, Antje and {Merlin-Brogniart}, Celine}, - year = {2017}, - month = jan, - journal = {The Canadian journal of regional science = La revue canadienne des sciences r\'egionales}, - abstract = {Dans cet article, nous faisons l'hypoth\`ese que l'\'ecologie industrielle (EI) peut \^etre un vecteur de d\'eveloppement ou de reconversion d'un territoire. Toutefois, la r\'eussite des exp\'eriences d'\'ecologie industrielle semble d\'ependre d'une gouvernance territoriale adapt\'ee. La plupart les travaux insistent sur la mise en \oe uvre d'une gouvernance orient\'ee vers l'initiation et le d\'eveloppement des synergies (appel\'ee ici \guillemotleft{} gouvernance statique \guillemotright ). Nous soulignons la n\'ecessit\'e de mettre en place une \guillemotleft{} gouvernance dynamique \guillemotright, orient\'ee vers des objectifs plus globaux de d\'eveloppement d'un milieu innovateur sur le territoire. A partir de l'\'etude de cas de Dunkerque (ville pionni\`ere en France dans la mise en \oe uvre de l'EI), nous montrons que cette \guillemotleft{} gouvernance dynamique\guillemotright{} repose sur la continuit\'e et la coordination de la gouvernance mais aussi sur le d\'eveloppement d'actions de sensibilisation et de r\'eflexion sur la question de l'\'echelle territoriale de la gouvernance (gouvernance multi-\'echelle et pluri-territoriale).}, - file = {/Users/fabio/Zotero/storage/Q7GUY5T4/Kasmi et al. - 2017 - Ecologie industrielle, milieu innovateur et gouver.pdf} -} - -@article{kasmiMultiphysicsPropertiesThermoplastic2021, - title = {Multi-Physics Properties of Thermoplastic Polyurethane at Various Fused Filament Fabrication Parameters}, - author = {Kasmi, Samir and Ginoux, Geoffrey and Labb{\'e}, Eric and Alix, S{\'e}bastien}, - year = {2021}, - month = nov, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-08-2021-0214}, - urldate = {2021-11-30}, - abstract = {The purpose of this study is to test a flexible polymer with different characteristics compared to other classical polymers mostly used in the additive manufacturing process, and to improve its mechanical properties and microstructure, by modifying different printing parameters, to make it more suitable for various industrial applications.,Seven parameters were tested, namely, nozzle temperature, bed temperature, layer thickness, printing speed, flow rate, printing time gap between two successive printed layers and raster orientation. Rheological characterizations were conducted to evaluate the influence of nozzle temperature on the melt viscosity of thermoplastic polyurethane (TPU). The effect of thermal printing parameters on the crystallinity behavior was explored. Tomographic characterizations were realized to measure the porosity and evaluate the internal structure quality of printed specimens.,Increases of the nozzle temperature, bed temperature, layer thickness and flow rate had a positive influence on the tensile strength properties of TPU with a reduction of porosity. Higher printing speeds created defects and negatively influenced the strength properties of TPU. An increase in the printing time gap between layers led to poor interlayer adhesion and decreased the tensile strength. Specimens with layers all oriented parallel to the loading direction exhibited superior mechanical properties compared to other raster orientations.,Thermoplastic elastomers are a unique class of polymers characterized by the combined thermal, chemical and mechanical properties of their elastomer and thermoplastic parts. TPU elastomer, as one of the elastomer families, has found an important position in the bioengineering and three-dimensional printing industry. This study reports a comprehensive study of the impact of additive manufacturing parameters on the properties of TPU.}, - keywords = {Fused filament fabrication,Mechanical properties,Porosity,Thermoplastic elastomer} -} - -@article{Kasparova2013, - title = {Possibility of Reconstruction of Dental Plaster Cast from {{3D}} Digital Study Models}, - author = {Kasparova, Magdalena M.a and Grafova, L.b Lucie and Dvorak, P.b Petr and Dostalova, T.a Tatjana and Prochazka, Ales A.b and Eliasova, H.d Hana and Prusa, J.c Josef and Kakawand, Soroush S.a}, - year = {2013}, - journal = {BioMedical Engineering Online}, - volume = {12}, - number = {1}, - pages = {49}, - issn = {1475-925X}, - doi = {10.1186/1475-925X-12-49}, - abstract = {Objectives: To compare traditional plaster casts, digital models and 3D printed copies of dental plaster casts based on various criteria. To determine whether 3D printed copies obtained using open source system RepRap can replace traditional plaster casts in dental practice. To compare and contrast the qualities of two possible 3D printing options - open source system RepRap and commercially available 3D printing.Design and settings: A method comparison study on 10 dental plaster casts from the Orthodontic department, Department of Stomatology, 2nd medical Faulty, Charles University Prague, Czech Republic.Material and methods: Each of 10 plaster casts were scanned by inEos Blue scanner and the printed on 3D printer RepRap [10 models] and ProJet HD3000 3D printer [1 model]. Linear measurements between selected points on the dental arches of upper and lower jaws on plaster casts and its 3D copy were recorded and statistically analyzed.Results: 3D printed copies have many advantages over traditional plaster casts. The precision and accuracy of the RepRap 3D printed copies of plaster casts were confirmed based on the statistical analysis. Although the commercially available 3D printing enables to print more details than the RepRap system, it is expensive and for the purpose of clinical use can be replaced by the cheaper prints obtained from RepRap printed copies.Conclusions: Scanning of the traditional plaster casts to obtain a digital model offers a pragmatic approach. The scans can subsequently be used as a template to print the plaster casts as required. Using 3D printers can replace traditional plaster casts primarily due to their accuracy and price. \textcopyright{} 2013 Kasparova et al.; licensee BioMed Central Ltd.}, - isbn = {1475-925X (Electronic) 1475-925X (Linking)}, - pmid = {23721330}, - keywords = {3D print,Dentistry,Plaster cast,Rapid prototyping}, - file = {/Users/fabio/Zotero/storage/2TF38CMB/Kasparova et al. - 2013 - Possibility of reconstruction of dental plaster cast from 3D digital study models.pdf} -} - -@article{kastrinosSustainableDevelopmentGoals2020, - title = {Sustainable Development Goals in the Research and Innovation Policy of the {{European Union}}}, - author = {Kastrinos, Nikos and Weber, K. Matthias}, - year = {2020}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {157}, - pages = {120056}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120056}, - urldate = {2020-05-27}, - abstract = {Leading the world towards the Sustainable Development Goals (SDGs) is an ambition of the European Union (EU) and an important objective of the European Commission's proposal for Horizon Europe: the EU framework programme for Research and Innovation (R\&I) 2021\textendash 2027. The new orientation of the framework programme requires a new sustainability-oriented thematic agenda and a new approach to governance. Following the perspective of transition management, the paper argues that i) the success of EU R\&I policy in its pursuit of SDGs will depend on the reflexivity of its governance, and ii) that foresight can build reflexivity into the governance of EU R\&I policy. The paper provides insights in the shaping of Horizon Europe through the BOHEMIA project, a major foresight exercise that supported the preparation of the Commission proposal. The BOHEMIA project aimed at strengthening reflexivity in the policy preparation process and provided advice on both governance and potential thematic orientations for Horizon Europe. Its influence on the proposal and the extent, to which future oriented-reflexivity will characterize the implementation of Horizon Europe, can be seen as precursors of the prospects of the policy to contribute to sustainability transitions in Europe and the world.} -} - -@article{Kasyanov2011, - title = {Toward Organ Printing: {{Design}} Characteristics, Virtual Modelling and Physical Prototyping Vascular Segments of Kidney Arterial Tree}, - author = {Kasyanov, V. and Brakke, K. and Vilbrandt, T. and {Moreno-Rodriguez}, R. and {Nagy-Mehesz}, A. and Visconti, R. and Markwald, R. and Ozolanta, I. and Rezende, R.a. and Lixandr{\~a}o Filho, A.L. and Infor{\c c}ati Neto, P. and Pereira, F.D.a.S. and Kemmoku, D.T. and {da Silva}, J.V.L. and Mironov, V.}, - year = {2011}, - month = dec, - journal = {Virtual and Physical Prototyping}, - volume = {6}, - number = {4}, - pages = {197--213}, - issn = {1745-2759}, - doi = {10.1080/17452759.2011.631738}, - urldate = {2014-02-02}, - file = {/Users/fabio/Zotero/storage/FB7WEKWF/Kasyanov et al. - 2011 - Toward organ printing Design characteristics, virtual modelling and physical prototyping vascular segments of k.pdf} -} - -@article{kasznikEndPlasticEU2023, - title = {The End of Plastic? {{The EU}}'s Directive on Single-Use Plastics and Its Implementation in {{Poland}}}, - shorttitle = {The End of Plastic?}, - author = {Kasznik, Dominika and {\L}apniewska, Zofia}, - year = {2023}, - month = jul, - journal = {Environmental Science \& Policy}, - volume = {145}, - pages = {151--163}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2023.04.005}, - urldate = {2023-05-10}, - abstract = {We are drowning in a sea of plastic. Not only do marine animals ingest or get entangled in (micro) plastic, but it also ends up in the food chain, including in humans. This plastic comes from mainly single-use products. ``Directive (EU) 2019/904 of the European Parliament and of the Council of 5 June 2019 on the reduction of the impact of certain plastic products on the environment'' introduced numerous restrictions on their production. However, its effectiveness depends on national implementations that are delayed due to, inter alia, the objections of manufacturers. In this article, we present research conducted on Polish companies producing single-use plastic products, on sellers (retail outlets and food service establishments) and consumers. The results show that all study groups agree on the need to reduce the production of disposable plastics. The most frequently indicated solution is the introduction of reusable products to the market (in line with the circular economy notion), which would still be synthetic polymers. Manufacturers emphasize that promising chemical recycling technologies are emerging for all plastic waste. In addition, both consumers and producers are increasingly focused on products made of alternative materials, as consumers (especially from large cities) are increasingly averse to plastic in general, which was also pointed out by sellers. Consumers surveyed believe that the ``Plastics Directive'' is needed and blame the producers of disposable plastics for the condition of the environment, while manufacturers highlight irresponsible consumer behaviour and the need for more education in this regard.}, - langid = {english}, - keywords = {Anti-plastic trends,Directive (EU) 2019/904,Disposable plastic products,Ecological economics,Plastics manufacturers,SUP directive}, - file = {/Users/fabio/Zotero/storage/SAUYJR8R/Kasznik y Łapniewska - 2023 - The end of plastic The EU’s directive on single-u.pdf;/Users/fabio/Zotero/storage/X2Z8SKHN/S1462901123001077.html} -} - -@article{kattingerNumericalSimulationComplex2021, - title = {Numerical Simulation of the Complex Flow during Material Extrusion in Fused Filament Fabrication}, - author = {Kattinger, Julian and Ebinger, Tim and Kurz, Raphael and Bonten, Christian}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - pages = {102476}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102476}, - urldate = {2021-11-30} -} - -@article{Katz-Gerro2019, - title = {Environmental Behavior in Three Countries: {{The}} Role of Intergenerational Transmission and Domains of Socialization}, - author = {{Katz-Gerro}, Tally and Greenspan, Itay and Handy, Femida and Vered, Yaara}, - year = {2019}, - month = aug, - journal = {Journal of Environmental Psychology}, - pages = {101343}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2019.101343} -} - -@article{Katzy2012c, - title = {Editorial: {{A Living Lab Research Agenda}}}, - author = {Katzy, Bernhard R and Pawar, Kulwant S and Thoben, Klaus-Dieter}, - year = {2012}, - journal = {International Journal of Product Development}, - volume = {17}, - number = {1/2}, - pages = {1--7}, - issn = {14779056} -} - -@article{Kaulio1998, - title = {Customer, Consumer and User Involvement in Product Development: {{A}} Framework and a Review of Selected Methods}, - author = {Kaulio, Matti. A}, - year = {1998}, - journal = {Total Quality Management}, - volume = {9}, - number = {1}, - pages = {141--149}, - issn = {0954-4127}, - doi = {10.1080/0954412989333}, - abstract = {Customer focus is a key component in a total quality management approach. This paper presents a review of seven diOEerent methods for customer involvement in product development, of which quality function deployment is one. Results from the review indicate that diOEerent methods support the involvement of customers at diOEerent phases of the design process, particularly in three phases: the speci\textregistered cation phase, concept development and the prototyping. Moreover, diOEerent methods support the involvement of customers in diOEerent ways. Three types of involvement are identi\textregistered ed: design for customers, design with customers and design by customers. The overall conclusion is that there exists a potential for improvements for practitioners who would like to further customer focus in the design process.}, - isbn = {0954412989333} -} - -@article{Kautish2019, - ids = {kautish2019}, - title = {The Moderating Influence of Environmental Consciousness and Recycling Intentions on Green Purchase Behavior}, - author = {Kautish, Pradeep and Paul, Justin and Sharma, Rajesh}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {228}, - pages = {1425--1436}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.389}, - urldate = {2020-05-21}, - abstract = {This article examines the moderating influence of environmental consciousness and recycling intentions on green purchase behavior (GPB)in an emerging economy. Through this study, we attempt to significantly contribute to the existing body of knowledge on green marketing by ascertaining the role of those ethical constructs, on GPB. A hypo-deductive research design was adopted and a theoretical model was conceptualized by linking the moderating effects of environmental consciousness and recycling intentions to GPB. To collect the data for the study, a self-administered questionnaire was run with 312 consumers from India. The data were analyzed for assessment of the measurement and structural models via structural equation modeling. The findings indicate that environmental consciousness and recycling intentions significantly moderate the impact of perceived consumer effectiveness (PCE)and willingness to be environmentally friendly (WEF)on GPB. The study offers managerial insights for green marketers to operate in fast growing emerging markets. The present study is significant as it is the first of its kind which links the moderating effects of environmental consciousness and recycling intentions in light of the theory of planned behavior (TPB)on GPB in such a context.}, - keywords = {Consciousness,Emerging markets,Environment,Green marketing,Recycling intentions,Sustainability} -} - -@article{kavanaghAreWeLiving2021, - ids = {kavanagh2021a}, - title = {Are We Living in a Time of Particularly Rapid Social Change? {{And}} How Might We Know?}, - author = {Kavanagh, Donncha and Lightfoot, Geoff and Lilley, Simon}, - year = {2021}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {169}, - pages = {120856}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120856}, - urldate = {2021-06-08} -} - -@article{Kawecki2021, - title = {Polymer-Specific Dynamic Probabilistic Material Flow Analysis of Seven Polymers in {{Europe}} from 1950 to 2016}, - author = {Kawecki, Delphine and Wu, Qie and Gon{\c c}alves, Jo{\~a}o S.V. and Nowack, Bernd}, - year = {2021}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {173}, - pages = {105733}, - publisher = {{Elsevier BV}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105733}, - urldate = {2021-07-05}, - abstract = {Information on the flows of specific polymers through the anthroposphere forms the basis of any assessment of the environmental implications of plastic. This work presents a dynamic probabilistic material flow analysis of seven commodity thermoplastics: low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), polystyrene (PS), expanded polystyrene (EPS), polyvinylchloride (PVC), and polyethylene terephthalate (PET). The analysis examines nine product sectors and 35 product categories, including textiles, across Europe from 1950 to 2016. Total consumption of these seven polymers was 90.0 {$\pm$} 4.8 kg/cap in 2016. The in-use stock that year was 47 kg/cap for LDPE, 81 kg/cap for HDPE, 81 kg/cap for PP, 21 kg/cap for PS, 56 kg/cap for EPS, 163 kg/cap for PVC, and 16 kg/cap for PET. For EPS and PVC, the fraction contained in the in-use stock is 51\% and 39\% of the total production. Landfill is the major compartment where LDPE, HDPE, PP, PS, and PET end up (48\%\textendash 60\%). Elimination\textemdash incineration and destruction in waste incineration plants\textemdash occurs for 15\%\textendash 19\% of LDPE, HDPE, PP, PS, and PET, and 10\% of EPS and PVC. Current European recycling rates vary from 11\% for PS to 33\% for PET. The precise separation of different polymers into very detailed product categories will allow the formulation of future scenarios about interventions to improve the circularity of specific polymers and provide the basis to assess the polymer-specific releases to the environment.}, - file = {/Users/fabio/Zotero/storage/UDRYLFBG/full-text.pdf} -} - -@article{Kazala2019, - title = {The Most Important Open Technologies for Design of Cost Efficient Automation Systems}, - author = {Kazala, R. and Straczynski, P.}, - year = {2019}, - month = nov, - journal = {IFAC-PapersOnLine}, - volume = {52}, - number = {25}, - pages = {391--396}, - publisher = {{Elsevier B.V.}}, - issn = {24058963}, - doi = {10.1016/j.ifacol.2019.12.567}, - abstract = {Nowadays, industrial automation systems are mostly used with proprietary hardware and software. Creating such systems requires relatively large costs. This is a problem when designing control systems with a limited budget, which are created, for example, in developing countries or small businesses. Currently, there have been opportunities to create low-cost automation systems by using solutions distributed on the basis of open-source and open-hardware. The work reviews the most important solutions and presents examples of their use in automation systems.}, - keywords = {Automation,Open-source,Production costs,Programmable controllers}, - file = {/Users/fabio/Zotero/storage/XASCYRP9/Kazala_Straczynski_2019_The most important open technologies for design of cost efficient automation.pdf} -} - -@article{kazemierMasteringFuturesLiteracy2021, - title = {Mastering Futures Literacy in Higher Education: {{An}} Evaluation of Learning Outcomes and Instructional Design of a Faculty Development Program}, - author = {Kazemier, Elles M. and Damhof, Loes and Gulmans, Jitske and Cremers, Petra H.M.}, - year = {2021}, - month = sep, - journal = {Futures}, - volume = {132}, - pages = {102814}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2021.102814}, - urldate = {2021-08-23}, - abstract = {Futures Literacy (FL) is a capability yet to take root within the context of Higher Education (HE). As HE is increasingly addressing complex societal issues, developing FL can be important for both HE students and faculty. This study evaluates a faculty development program that sets out to build FL within the context of HE. The aim is twofold. First, it explores to what extent participants developed the program's three learning outcomes concerning FL: enhanced perception, embracing complexity and new sense of agency. Second, it evaluates participants' perceived value of the program's instructional strategies and design. Measurement tools were a survey based on Wenger's value creation model and a selection of open-ended reflectional exercises. A first exploration of the data indicates all participants reported development in one or more FL learning outcomes. They also show that the program's instructional strategies and design supported participants in their learning. Further study is needed to understand the working mechanisms and design principles for developing FL in educational settings and beyond.}, - keywords = {Faculty development,Futures literacy,Higher education,Instructional strategies,Transformative learning}, - file = {/Users/fabio/Zotero/storage/EHW56AN8/full-text.pdf} -} - -@article{Kazmer2016, - title = {A {{Protocol}} for {{Filament Production}} and {{Use}} in {{Fused Deposition Modeling}}}, - author = {Kazmer, D. O. and Coogan, T. J. and Mead, J. and Barry, C. and Johnston, S. and Malloy, R. and {Sobkowicz-Kline}, M. and Vangness, J. and Casey, P. and Rondeau, D. and Moshe, A.}, - year = {2016}, - journal = {Spe Antec}, - pages = {881--886}, - abstract = {A protocol for filament production and use in fused deposition modeling (FDM) is proposed that includes four stages: 1) material characterization of the thermoplastic feedstock, 2) filament production, 3) test specimen production, and 4) protocol verification. Preliminary results indicate that the protocol is feasible and will assist in broadening the portfolio of materials for use in FDM, optimizing FDM process conditions, and developing a capable FDM process simulation.}, - isbn = {9780692719619 (ISBN)}, - file = {/Users/fabio/Zotero/storage/7KAPAPCP/A PROTOCOL FOR FILAMENT PRODUCTION AND USE IN FUSED DEPOSITION MODELING.pdf} -} - -@article{kazmerConcurrentCharacterizationCompressibility2021, - title = {Concurrent Characterization of Compressibility and Viscosity in Extrusion-Based Additive Manufacturing of Acrylonitrile Butadiene Styrene with Fault Diagnoses}, - author = {Kazmer, David O. and Colon, Austin R. and Peterson, Amy M. and Kim, Sun Kyoung}, - year = {2021}, - month = jun, - journal = {Additive Manufacturing}, - pages = {102106}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102106}, - urldate = {2021-06-15} -} - -@article{kazmerInjectionPrintingAdditive2020, - title = {Injection Printing: Additive Molding via Shell Material Extrusion and Filling}, - author = {Kazmer, David O. and Colon, Austin}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101469}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101469}, - urldate = {2020-08-09}, - abstract = {Material extrusion is a popular process for both prototyping and digital manufacturing, yet it is lacking in terms of part strength, feature resolution, and production rate relative to alternative processes. Injection printing addresses these issues by combining material extrusion of the outer surfaces of the part at fine resolution with injection molding of larger interior cavities at high flow rates. Injection printing thus aims to utilize the full melting capacity of material extrusion printers to mitigate the curse of dimensionality that plagues additive manufacturing. Simple governing models for flow in the formed cavities as well as the stress and deflection of the shell walls are presented. To validate the performance of injection printing relative to material extrusion, impact specimens and tensile bars were printed of acrylonitrile butadiene styrene (ABS). The tensile and impact results of the samples were compared, and image analysis was performed on the post-test samples. It was found that injection printing increased print speeds by an average factor of 3.2 relative to conventional material extrusion using the same linear print velocities. With respect to properties, the stiffness, strength, and strain to failure of injection printed tensile bars (in-plane) were respectively increased by 21 \%, 47 \%, and 35 \% compared to material extrusion. Properties of impact specimen and vertically printed tensile bars also showed promising gains albeit with constraints related to the printer's melting capacity. Even still, injection printing is shown as a broadly applicable and readily accessible process for increasing part strength and production rate while enabling improved feature resolution without greatly extended print times.}, - keywords = {Dimensionality,Injection molding,Instrumentation,Material extrusion} -} - -@article{Keating2013, - title = {Compound Fabrication: {{A}} Multi-Functional Robotic Platform for Digital Design and Fabrication}, - author = {Keating, Steven and Oxman, Neri}, - year = {2013}, - month = dec, - journal = {Robotics and Computer-Integrated Manufacturing}, - volume = {29}, - number = {6}, - pages = {439--448}, - publisher = {{Elsevier}}, - issn = {07365845}, - doi = {10.1016/j.rcim.2013.05.001}, - abstract = {Supporting various applications of digital fabrication and manufacturing, the industrial robot is typically assigned repetitive tasks for specific pre-programmed and singular applications. We propose a novel approach for robotic fabrication and manufacturing entitled Compound Fabrication, supporting multi-functional and multi-material processes. This approach combines the major manufacturing technologies including additive, formative and subtractive fabrication, as well as their parallel integration. A 6-axis robotic arm, repurposed as an integrated 3D printing, milling and sculpting platform, enables shifting between fabrication modes and across scales using different end effectors. Promoting an integrated approach to robotic fabrication, novel combination processes are demonstrated including 3D printing and milling fabrication composites. In addition, novel robotic fabrication processes are developed and evaluated, such as multi-axis plastic 3D printing, direct recycling 3D printing, and embedded printing. The benefits and limitations of the Compound Fabrication approach and its experimental platform are reviewed and discussed. Finally, contemplation regarding the future of multi-functional robotic fabrication is offered, in the context of the experiments reviewed and demonstrated in this paper. ?? 2013 Elsevier Ltd.}, - isbn = {0736-5845}, - keywords = {3D printing,Compound fabrication,Digital fabrication,Rapid prototyping,Robotic arm,Robotic milling}, - file = {/Users/fabio/Zotero/storage/JBJDAYIK/Keating, Oxman - 2013 - Compound fabrication A multi-functional robotic platform for digital design and fabrication.pdf} -} - -@article{Keesstra2016, - title = {The Significance of Soils and Soil Science towards Realization of the {{United Nations}} Sustainable Development Goals}, - author = {Keesstra, Saskia D. and Bouma, Johan and Wallinga, Jakob and Tittonell, Pablo and Smith, Pete and Cerd{\`a}, Artemi and Montanarella, Luca and Quinton, John N. and Pachepsky, Yakov and Van Der Putten, Wim H. and Bardgett, Richard D. and Moolenaar, Simon and Mol, Gerben and Jansen, Boris and Fresco, Louise O.}, - year = {2016}, - journal = {SOIL}, - volume = {2}, - number = {2}, - pages = {111--128}, - issn = {2199398X}, - doi = {10.5194/soil-2-111-2016}, - abstract = {In this forum paper we discuss how soil scientists can help to reach the recently adopted UN Sustainable Development Goals (SDGs) in the most effective manner. Soil science, as a land-related discipline, has important links to several of the SDGs, which are demonstrated through the functions of soils and the ecosystem services that are linked to those functions (see graphical abstract in the Supplement).We explore and discuss how soil scientists can rise to the challenge both internally, in terms of our procedures and practices, and externally, in terms of our relations with colleague scientists in other disciplines, diverse groups of stakeholders and the policy arena. To meet these goals we recommend the following steps to be taken by the soil science community as a whole: (i) embrace the UN SDGs, as they provide a platform that allows soil science to demonstrate its relevance for realizing a sustainable society by 2030; (ii) show the specific value of soil science: research should explicitly show how using modern soil information can improve the results of inter-and transdisciplinary studies on SDGs related to food security, water scarcity, climate change, biodiversity loss and health threats; (iii) take leadership in overarching system analysis of ecosystems, as soils and soil scientists have an integrated nature and this places soil scientists in a unique position; (iii) raise awareness of soil organic matter as a key attribute of soils to illustrate its importance for soil functions and ecosystem services; (iv) improve the transfer of knowledge through knowledge brokers with a soil background; (v) start at the basis: educational programmes are needed at all levels, starting in primary schools, and emphasizing practical, down-to-earth examples; (vi) facilitate communication with the policy arena by framing research in terms that resonate with politicians in terms of the policy cycle or by considering drivers, pressures and responses affecting impacts of land use change; and finally (vii) all this is only possible if researchers, with soil scientists in the front lines, look over the hedge towards other disciplines, to the world at large and to the policy arena, reaching over to listen first, as a basis for genuine collaboration.}, - isbn = {2199-3971} -} - -@article{kekAnalysisBarriersThat2020, - title = {Analysis of Barriers That Impede the Elimination of Single-Use Plastic in Developing Economy Context}, - author = {KEK, Vimal and Mathiyazhagan, K. and Agarwal, Vernika and Luthra, Sunil and Sivakumar, K.}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - pages = {122629}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122629}, - urldate = {2020-07-14} -} - -@article{kelemenNetworksSciencepolicyinterfaceChallenges2021, - title = {Networks at the Science-Policy-Interface: {{Challenges}}, Opportunities and the Viability of the `Network-of-Networks' Approach}, - author = {Kelemen, Eszter and Pataki, Gy{\"o}rgy and Konstantinou, Zoi and Varumo, Liisa and Paloniemi, Riikka and Pereira, T{\^a}nia R. and {Sousa-Pinto}, Isabel and Vandewalle, Marie and Young, Juliette}, - year = {2021}, - month = sep, - journal = {Environmental Science \& Policy}, - volume = {123}, - pages = {91--98}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.05.008}, - urldate = {2021-06-08}, - file = {/Users/fabio/Zotero/storage/ZE3XUYXR/full-text.pdf} -} - -@article{kellensEnvironmentalDimensionsAdditive2017, - title = {Environmental {{Dimensions}} of {{Additive Manufacturing}}: {{Mapping Application Domains}} and {{Their Environmental Implications}}}, - shorttitle = {Environmental {{Dimensions}} of {{Additive Manufacturing}}}, - author = {Kellens, Karel and Baumers, Martin and Gutowski, Timothy G. and Flanagan, William and Lifset, Reid and Duflou, Joost R.}, - year = {2017}, - journal = {Journal of Industrial Ecology}, - volume = {21}, - number = {S1}, - pages = {S49-S68}, - issn = {1530-9290}, - doi = {10.1111/jiec.12629}, - urldate = {2022-09-14}, - abstract = {Additive manufacturing (AM) proposes a novel paradigm for engineering design and manufacturing, which has profound economic, environmental, and security implications. The design freedom offered by this category of manufacturing processes and its ability to locally print almost each designable object will have important repercussions across society. While AM applications are progressing from rapid prototyping to the production of end-use products, the environmental dimensions and related impacts of these evolving manufacturing processes have yet to be extensively examined. Only limited quantitative data are available on how AM manufactured products compare to conventionally manufactured ones in terms of energy and material consumption, transportation costs, pollution and waste, health and safety issues, as well as other environmental impacts over their full lifetime. Reported research indicates that the specific energy of current AM systems is 1 to 2 orders of magnitude higher compared to that of conventional manufacturing processes. However, only part of the AM process taxonomy is yet documented in terms of its environmental performance, and most life cycle inventory (LCI) efforts mainly focus on energy consumption. From an environmental perspective, AM manufactured parts can be beneficial for very small batches, or in cases where AM-based redesigns offer substantial functional advantages during the product use phase (e.g., lightweight part designs and part remanufacturing). Important pending research questions include the LCI of AM feedstock production, supply-chain consequences, and health and safety issues relating to AM.}, - langid = {english}, - keywords = {3D printing,additive manufacturing,energy efficiency,industrial ecology,resource efficiency,sustainability}, - file = {/Users/fabio/Zotero/storage/V8UQ2YIM/Kellens et al_2017_Environmental Dimensions of Additive Manufacturing.pdf;/Users/fabio/Zotero/storage/BNXD4GH4/jiec.html} -} - -@article{kellerWhyConsumersShift2021, - title = {Why Consumers Shift from Single-Use to Reusable Drink Cups: {{An}} Empirical Application of the Stage Model of Self-Regulated Behavioural Change}, - author = {Keller, Anna and K{\"o}hler, Jana Katharina and Eisen, Charis and Kleihauer, Silke and Hanss, Daniel}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {1672--1687}, - publisher = {{Elsevier BV}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.04.001}, - urldate = {2021-04-29}, - abstract = {e to the general public, but uptake has so far been limited. To explain what factors are associated with using single-use cup alternatives, we apply the stage model of self-regulated behavioural change in a cross-sectional questionnaire study, N = 573. We investigated three single-use cup alternatives: a refundable cup system, bringing one's own cup, and reducing one's consumption of hot beverages on the go. According to the theory, behavioural change occurs in four stages: predecisional, preactional, actional, and postactional. An individual requires stage-specific information and needs to make stage-specific decisions to progress towards sustained behavioural change. The results of our study showed which factors were associated with consumers' shifts from to-go-cup use to each of the alternatives and which factors need to be targeted to advance individuals to the next stage of change. We found that a chain of increased awareness, responsibility, and negative emotions, complemented by social norms, positive emotions, and goal feasibility, was associated with an increased intention to change away from single-use cups. The choice of a behavioural alternative was most strongly associated with the perceived control over the behaviour. Based on these results, we derive recommendations for practitioners on which levers to use to effectively reduce the use of single-use cups.} -} - -@book{Kelley2005, - title = {The Ten Faces of Innovation : {{IDEO}}'s Strategies for Beating the Devil's Advocate \& Driving Creativity throughout Your Organization}, - author = {Kelley, Tom and Littman, Jonathan}, - year = {2005}, - month = oct, - pages = {1--273}, - publisher = {{Currency/Doubleday}}, - abstract = {Reveals the strategies a major design firm uses to foster innovative thinking throughout an organization and overcome the naysayers who stifle creativity. The role of the devil's advocate allows individuals to raise questions and concerns that effectively kill new projects and ideas, while claiming no personal responsibility; nothing is more potent in stifling innovation. Drawing on nearly 20 years of experience, Kelley identifies ten roles people can play in an organization to foster innovation and new ideas while offering an effective counter to naysayers.\textendash From publisher description.}, - isbn = {0-385-51207-4}, - keywords = {industrijsko oblikovanje,inovacije,teorija oblikovanja} -} - -@article{kempTransitionManagementModel2007, - title = {Transition Management as a Model for Managing Processes of Co-Evolution towards Sustainable Development}, - author = {Kemp, Ren{\'e} and Loorbach, Derk and Rotmans, Jan}, - year = {2007}, - journal = {International Journal of Sustainable Development and World Ecology}, - volume = {14}, - number = {1}, - pages = {78--91}, - issn = {17452627}, - doi = {10.1080/13504500709469709}, - urldate = {2022-03-13}, - abstract = {Sustainable development requires changes in socio-technical systems and wider societal change \textendash{} in beliefs, values and governance that co-evolve with technology changes. In this article we present a practical model for managing processes of co-evolution: transition management. Transition management is a multilevel model of governance which shapes processes of co-evolution using visions, transition experiments and cycles of learning and adaptation. Transition management helps societies to transform themselves in a gradual, reflexive way through guided processes of variation and selection, the outcomes of which are stepping stones for further change. It shows that societies can break free from existing practices and technologies, by engaging in co-evolutionary steering. This is illustrated by the Dutch waste management transition. Perhaps transition management constitutes the third way that policy scientists have been looking for all the time, combining the advantages of incrementalism (based on mutual adaptation) with the advantages of planning (based on long-term objectives). \textcopyright{} 2007 Taylor and Francis Group, LLC.}, - keywords = {Co-Evolution,Goal-Oriented Modulation,Incrementalism,Multi-Level Governance,Planning,Sustainable Development} -} - -@article{kennedyBiophysicalModelIndustrial2021, - title = {A Biophysical Model of the Industrial Revolution}, - author = {Kennedy, Christopher}, - year = {2021}, - month = jun, - journal = {Journal of Industrial Ecology}, - volume = {25}, - number = {3}, - pages = {663--676}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13077}, - urldate = {2022-01-25}, - abstract = {Several biophysical characteristics underlay Britain's Industrial Revolution: improvements in agricultural productivity, large increases in use of coal-energy supply, and physical construction of infrastructure for industrialization and urbanization. These characteristics are represented in a four-sector model of Britain's economy (1760 to 1913) including agriculture, mining, construction of capital, and the production of goods and services. The model has a novel mathematical representation of a dynamic general equilibrium between capital, labor, and energy in an economy. Historical data are used to calibrate the model for growth of Britain's capital stock, coal use, and employment during the Industrial Revolution (first and second periods). Model simulations explore the impacts of two biophysical constraints: stagnation in agricultural productivity and reduced efficiency in coal mining in the absence of steam engines. Both scenarios exhibit substantial reductions in the growth of capital stock and significant changes to the distribution of labor. This article met the requirements for a gold-gold JIE data openness badge described at http://jie.click/badges.}, - keywords = {capital,endogenous growth,energy,general equilibrium model,Great Britain,labor}, - file = {/Users/fabio/Zotero/storage/2AGA9X2W/full-text.pdf} -} - -@article{kennedyIntersectionBiophysicalEconomics2022, - title = {The {{Intersection}} of {{Biophysical Economics}} and {{Political Economy}}}, - author = {Kennedy, Christopher}, - year = {2022}, - month = feb, - journal = {Ecological Economics}, - volume = {192}, - pages = {107272}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107272}, - urldate = {2021-11-30} -} - -@inproceedings{Kentzer2011a, - title = {An Open Source Hardware-Based Mechatronics Project: {{The}} Replicating Rapid 3-{{D}} Printer}, - booktitle = {2011 4th {{International Conference}} on {{Mechatronics}} ({{ICOM}})}, - author = {Kentzer, Jakob and Koch, Bjarke and Thiim, Michael and Jones, Richard W. and Villumsen, Egon}, - year = {2011}, - month = may, - number = {May}, - pages = {1--8}, - publisher = {{IEEE}}, - doi = {10.1109/ICOM.2011.5937174}, - abstract = {This contribution reviews the execution of an open source hardware (OSHW) project as part of the Master in Mechatronics Degree Programme at the University of Southern Denmark. There were a number of reasons that motivated us to carry out this project; educational, intellectual and research reasons. Open source projects provide unique opportunities for students to gain experience solving real-world problems. There was also a research consideration in pursuing an OSHW project. Three of the authors of this contribution are working towards a Master's Degree in Innovation and Business and wanted to carry out an OSHW project as a precursor to doing research work on the `Commercialization of OSHW Projects'. The choice of the project was all important and we choose to build a 3-D printer using information provided by the RepRap Open Source Community because this satisfied nearly all our specifications for an OSHW project. Our experiences in constructing a 3-D printer as well as documenting the areas where the open source information currently has deficiencies are documented here}, - isbn = {978-1-61284-435-0}, - keywords = {3D-printing,Education,Open source,OSHW,OSS,SDU-Mendel,The RepRap Poject}, - file = {/Users/fabio/Zotero/storage/RVB5HE59/Kentzer et al. - 2011 - An open source hardware-based mechatronics project The replicating rapid 3-D printer.pdf} -} - -@incollection{Kerbrat2016, - title = {Environmental {{Impact Assessment Studies}} in {{Additive Manufacturing}}}, - author = {Kerbrat, Olivier and Le Bourhis, Florent and Mognol, Pascal and Hasco{\"e}t, Jean-Yves}, - year = {2016}, - volume = {1}, - pages = {31--63}, - issn = {2315-7651}, - doi = {10.1007/978-981-10-0606-7_2}, - isbn = {978-981-10-0547-3}, - keywords = {additive manufacturing environmental impacts,energy consumption,optimization life-time performance electric,product design}, - file = {/Users/fabio/Zotero/storage/BBG7Q3SN/Subramanian Senthilkannan Muthu - 2016 - Handbook of Sustainability in Additive Manufacturing(2).pdf} -} - -@article{Kerdlap2021, - title = {Comparing the Environmental Performance of Distributed versus Centralized Plastic Recycling Systems: {{Applying}} Hybrid Simulation Modeling to Life Cycle Assessment}, - author = {Kerdlap, Piya and Purnama, Aloisius Rabata and Low, Jonathan Sze Choong and Tan, Daren Zong Loong and Barlow, Claire Y. and Ramakrishna, Seeram}, - year = {2021}, - journal = {Journal of Industrial Ecology}, - publisher = {{Blackwell Publishing}}, - issn = {15309290}, - doi = {10.1111/jiec.13151}, - urldate = {2021-11-22}, - abstract = {The plastic waste dilemma has gained international attention because of increased public awareness and the rise of waste import bans. Sorting and recycling technologies that deal with plastic waste streams exist but face challenges in highly dense urbanized regions such as Singapore because of high space requirements. Multiple small-scale plastic sorting and recycling facilities that are distributed closer to points of waste generation offer the possibility of increasing the recovery of plastic-waste streams in urbanized settings. To holistically quantify the environmental performance of this type of system, a life cycle assessment (LCA) is conducted to compare five different scenarios of distributed and centralized sorting and recycling of plastic bottles and takeaway containers in Singapore. A hybrid simulation model is used to simulate the complex dynamics of waste-processing systems which involves waste generation, collection scheduling, sorting, recycling, and disposal of residual materials. The results of the LCA showed that the life cycle environmental impacts to climate change, water depletion, and terrestrial ecotoxicity of the distributed scenarios were higher than the centralized scenarios by 7\textendash 30\% depending on the impact category. Although the distributed scenarios had lower total travel distances, their reliance on commercial vans led to their higher environmental impacts than the centralized scenarios. The findings of this study provide motivation for future research in applying hybrid simulation models in LCAs of waste-to-resource exchange networks. The data used to carry out the hybrid simulations and the LCA are provided as Supporting Information. This article met the requirements for a Gold-Silver JIE data openness badge described at http://jie.click/badges.}, - keywords = {circular economy,distributed systems,industrial ecology,plastic recycling,waste management}, - file = {/Users/fabio/Zotero/storage/F5WSYXGF/jiec.13151.pdf} -} - -@article{kerdlapLifeCycleCost, - title = {Life Cycle Cost Analysis of Distributed versus Centralized Plastic Sorting and Recycling}, - author = {Kerdlap, Piya and Purnama, Aloisius Rabata and Low, Jonathan Sze Choong and Tan, Daren Zong Loong and Barlow, Claire Y. and Ramakrishna, Seeram}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13353}, - urldate = {2023-01-15}, - abstract = {Miniaturizing plastic recycling through distributed systems has been viewed as a way to manage waste closer to the source while minimizing logistics requirements. The environmental performance of distributed manufacturing and waste management systems has been evaluated, but few studies have measured the financial performance. This study combines life cycle costing and hybrid simulation modeling to compare the net present value of small-scale distributed versus large-scale centralized systems of sorting and recycling plastic bottles and takeaway containers disposed in Singapore over 7 years. The results showed that distributed systems face a net financial loss at existing prices of SGD80\textendash 120/tonne recycled pellets. This is because of the high operation costs, particularly the labor costs due to the reliance on manual sorting. Despite being closer to the waste sources, distributed scenarios have higher fuel costs due to the poorer fuel efficiency of commercial vans compared to the larger trucks in the centralized scenarios. To improve the financial performance of distributed small-scale plastic recycling systems, it is generally recommended that small-scale sorting facilities reduce the reliance on manual labor; the smaller trucks should have higher fuel economies than conventional large waste hauling trucks; the number of small-scale facilities set up should match the amount of waste to be converted; and the price of the recycled pellets should be high enough to recover the high operating costs of recycling. The findings of this study provide motivation for future research in evaluating the financial performance of distributed recycling of other waste streams. This article met the requirements for a gold-gold data badge JIE data openness badge described at http://jie.click/badges}, - langid = {english}, - keywords = {cost\textendash benefit analysis,distributed systems,economic evaluation,industrial ecology,plastic recycling,waste management}, - file = {/Users/fabio/Zotero/storage/JUIXILBN/Kerdlap et al. - Life cycle cost analysis of distributed versus cen.pdf;/Users/fabio/Zotero/storage/7LZYEACZ/jiec.html} -} - -@article{Kerin2019, - title = {A Review of Emerging Industry 4.0 Technologies in Remanufacturing}, - author = {Kerin, Mairi and Pham, Duc Truong}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117805}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117805}, - urldate = {2020-05-10}, - abstract = {This paper reviews the literature on the emerging digital technologies of Industry 4.0 (I4.0) focussed on the applicability of the Internet of Things (IoT), Virtual Reality (VR) and Augmented Reality (AR) in remanufacturing. Inspired by the frameworks developed to support exploration and realisation of I4.0 technologies for disassembly, the paper discusses the same emerging technologies in the wider context of remanufacturing. Trends and gaps have been identified from a value-creation perspective that encompasses the product to be remanufactured, the remanufacturing equipment and processes adopted and related organisation issues. Findings suggest there is a need to explore the connection of cyber-physical systems to the IoT to support smart remanufacturing, whilst aligning with evolving information and communication infrastructures and circular economy business models. The review highlights twenty-nine research topics that require attention to support this field.}, - keywords = {Augmented reality,Cyber-physical systems,Industry 4.0,Internet of things,Smart remanufacturing,Virtual reality} -} - -@article{Kerin2020, - title = {Smart Remanufacturing: A Review and Research Framework}, - author = {Kerin, Mairi and Pham, Duc Truong}, - year = {2020}, - journal = {Journal of Manufacturing Technology Management}, - publisher = {{Emerald Group Publishing Ltd.}}, - issn = {1741038X}, - doi = {10.1108/JMTM-06-2019-0205}, - urldate = {2020-05-10}, - abstract = {Purpose: To review the state-of-the-art in smart remanufacturing, highlighting key elements of an Industry 4.0 (I4.0) future that supports circular economy (CE) principles and offer a conceptual framework and research agenda to accelerate digitalisation in this sector. Design/methodology/approach: The Scopus, Web of Science and ScienceDirect databases and search terms ``Industry 4.0'', ``Internet of things'', ``Smart manufacturing'' and ``Remanufacturing'' were used to identify and select publications that had evidence of a relationship between those keywords. The 329 selected papers were reviewed with respect to the triple bottom line (economic, social and environmental). The study benefited from advanced text quantitative processing using NVivo software and a complete manual qualitative assessment. Findings: Changes in product ownership models will affect the remanufacturing industry, with the growth of product-service-systems seen as an opportunity to re-circulate resources and create value. This is being supported by changes in society, user expectations and workforce attributes. Key to the success of remanufacturing in an I4.0 future is the uptake of existing and emerging digital technologies to shorten and strengthen links between product manufacturers, users and remanufacturers. Originality/value: Remanufacturing is recognised as a key CE strategy, which in turn is an important research area for development in our society. This article is the first to study ``smart remanufacturing'' for the CE. Its uniqueness lies in its focus on the remanufacturing industry and the sustainable application of I4.0 enablers. The findings are used to create a framework that links to the research agenda needed to realise smart remanufacturing.}, - keywords = {Circular economy,Cyber-physical systems,Digital remanufacturing,Industry 4.0,Internet of things,Remanufacturing,Smart remanufacturing} -} - -@article{Kern2019, - title = {Policy Mixes for Sustainability Transitions: {{New}} Approaches and Insights through Bridging Innovation and Policy Studies}, - author = {Kern, Florian and Rogge, Karoline S. and Howlett, Michael}, - year = {2019}, - month = aug, - journal = {Research Policy}, - pages = {103832}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103832} -} - -@article{Kerosuo2010, - title = {Promoting {{Innovation}} and {{Learning}} through {{Change Laboratory}}: {{An Example}} from {{Finnish Health Care}}}, - author = {Kerosuo, Hannele and Kajamaa, Anu and Engestr{\"o}m, Yrj{\"o}}, - year = {2010}, - journal = {Central European Journal of Public Policy}, - volume = {4}, - number = {1}, - pages = {110--131}, - issn = {1802-4866}, - abstract = {The objective of this article is to introduce Change Laboratory as a new method for promoting innovation and learning in organizations and at work. Change Laboratory\textregistered{} represents an example of the social process of innovation during which new ideas are developed and put into action within an organization. We suggest that successful social processes of innovation can be promoted through expansive learning in Change Laboratories. Change Laboratory is based on cultural-historical activity theory and provides a set of instruments for innovating through expansive learning. In this article, we illustrate a process of learning on a case example from Finnish health care. The case shows how Change Laboratory was applied to develop a surgical unit of a university hospital in Northern Finland. The social process of innovation involved the development of a new organizational and leadership model. In conclusion, we suggest that organizations can improve their capacity to innovate through expansive learning in Change Laboratory interventions. In order to understand the process of innovation the contradictions and their transformations need to be understood in the scrutinized activity.}, - keywords = {Change Laboratory,cultural-historical activity theory,hospitals,knowledge-creation,social process of innovation} -} - -@article{Kerr2020, - title = {Technology Roadmapping: {{Industrial}} Roots, Forgotten History and Unknown Origins}, - author = {Kerr, Clive and Phaal, Robert}, - year = {2020}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {155}, - pages = {119967}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119967}, - urldate = {2020-04-24}, - abstract = {Technology roadmapping has an established and proven track record for helping organizations with their strategy, long-term planning, innovation and foresight activities. Technology Forecasting \& Social Change has played a leading role in disseminating research on roadmapping and, so, for its 50th anniversary issue, this paper provides a historical account of the emergence of roadmapping from the practices developed and deployed by technological-based organizations. Motorola, BP, Philips, EIRMA, Lucent Technologies and the Semiconductor Industry Association have all made significant contributions leading to the modern form that embodies a temporal, multi-layered, systems-based approach underpinned by the `market-product-technology' structure (i.e. why-what-how). However, the industrial roots of technology roadmapping can be traced back to an earlier period, which is, as of yet, unacknowledged in the technology and innovation management literature. There is the overlooked or, perhaps, forgotten history where organizations such as NASA, Boeing, GE, Lockheed, USAF, Rockwell International and the U.S. Department of Energy initiated and advanced the practice of roadmapping \textendash{} through this publication, their contributions will now be given the credit they so rightfully deserve.}, - keywords = {Innovation,Roadmapping,Strategy,Technology management} -} - -@article{kerrPresentingPossibilitiesPlans2021, - title = {Presenting Possibilities, Plans, Pathways, Programmes: {{NASA}}'s Use of Strategic Roadmapping Visuals}, - author = {Kerr, Clive}, - year = {2021}, - month = sep, - journal = {https://doi.org/10.1080/09537325.2021.1979209}, - pages = {1--20}, - publisher = {{Routledge}}, - doi = {10.1080/09537325.2021.1979209}, - urldate = {2021-09-27}, - abstract = {Strategic roadmaps provide a visual approach for structuring long-term plans, conveying policy commitments, summarising an organisation's intent and depicting prospective pathways to realising a vi...}, - keywords = {information design,roadmapping,strategic planning,Visual communication} -} - -@article{kerschnerDegrowthTechnologyFeasible2018, - title = {Degrowth and {{Technology}}: {{Towards}} Feasible, Viable, Appropriate and Convivial Imaginaries}, - shorttitle = {Degrowth and {{Technology}}}, - author = {Kerschner, Christian and W{\"a}chter, Petra and Nierling, Linda and Ehlers, Melf-Hinrich}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - series = {Technology and {{Degrowth}}}, - volume = {197}, - pages = {1619--1636}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2018.07.147}, - urldate = {2022-10-11}, - abstract = {Mainstream sustainability discourses are firmly built on the mantra that more technology leads to more economic growth, which in turn leads to more welfare and sustainability. With economic growth becoming ever more difficult and undesirable, and sustainability challenges ever more pressing, alternative post-growth and Degrowth discourses have gained momentum in the last decade. However, the role of technology on the path towards a `Degrowth Society' is far from clear and subject to intense debate between enthusiasts and sceptics of technology. This editorial to the special issue on `Degrowth and Technology' represents the first in-depth analysis of the multiple perspectives on technology present in the Degrowth community. Using an artistic analogy, we illustrate four main areas of exploration for a future Degrowth and Technology research agenda: 1) theoretical and conceptual approaches, 2) case studies of innovative socio-technical arrangements, 3) evaluation of technologies according to their feasibility, viability, appropriateness and conviviality and 4) governance approaches. Moreover, we identify and discuss reoccurring themes in the texts such as energy, agency and democratisation of technology and introduce new concepts such as `Degrowth Technology' and 'Degrowth Society'. Finally, we offer guidance for future research and for the development of a shared socio-technological imaginary of the Degrowth community.}, - langid = {english}, - keywords = {Conviviality,Degrowth,Evaluation,Governance,Imaginaries,Technology}, - file = {/Users/fabio/Zotero/storage/M53CMIL4/Kerschner et al. - 2018 - Degrowth and Technology Towards feasible, viable,.pdf;/Users/fabio/Zotero/storage/KBUEQFEF/S095965261832136X.html} -} - -@article{Ketelsen2020, - title = {Consumers' Response to Environmentally-Friendly Food Packaging - {{A}} Systematic Review}, - author = {Ketelsen, Meike and Janssen, Meike and Hamm, Ulrich}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {254}, - pages = {120123}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120123} -} - -@article{Ketprapakorn2019, - title = {Toward an {{Asian}} Corporate Sustainability Model: {{An}} Integrative Review}, - author = {Ketprapakorn, Nuttasorn}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {117995}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117995} -} - -@article{Keuschnigg2018, - title = {Thou {{Shalt Recycle}}: {{How Social Norms}} of {{Environmental Protection Narrow}} the {{Scope}} of the {{Low-Cost Hypothesis}}}, - author = {Keuschnigg, Marc and Kratz, Fabian}, - year = {2018}, - month = dec, - journal = {Environment and Behavior}, - volume = {50}, - number = {10}, - pages = {1059--1091}, - issn = {0013-9165}, - doi = {10.1177/0013916517726569} -} - -@book{Keyson2017, - title = {Living {{Labs}}}, - author = {Keyson, David V and {Guerra-Santin}, Olivia and Lockton, Dan}, - editor = {Keyson, David V and {Guerra-Santin}, Olivia and Lockton, Dan}, - year = {2017}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-319-33527-8}, - isbn = {978-3-319-33526-1} -} - -@article{Khademi-Vidra2020, - ids = {Khademi-Vidra2020a}, - title = {Motivations and Attitudes: {{An}} Empirical Study on {{DIY}} ({{Do-It-Yourself}}) Consumers in {{Hungary}}}, - author = {{Khademi-Vidra}, Anik{\'o} and Bujdos{\'o}, Zolt{\'a}n}, - year = {2020}, - month = jan, - journal = {Sustainability (Switzerland)}, - volume = {12}, - number = {2}, - pages = {517}, - publisher = {{MDPI AG}}, - issn = {20711050}, - doi = {10.3390/su12020517}, - urldate = {2020-05-04}, - abstract = {The market for homemade and handcrafted items has expanded significantly in recent years. Related activities range from community-supported agricultural activities, tinkering at home, renovating our houses, design elements, and defining space in the world of gastronomy and fashion as well, and it extends to cover many other activities, where the "producers" also double up as the consumers. The number of scientific analyses in Hungarian language dealing with this subject is very low and no deep empirical results (interviews, questionnaires, ethnographic analyses, etc.) to support our scientific experience exist yet. The purpose of this study is first to review the terminology issued and difficulties that are related to this phenomenon, and, based on the results of a questionnaire survey, and secondly to explore the motivations of DIYers and the attitudes behind their actions. In our study, we mean on Do-It-Yourself (DIY)-in line with the vast majority of literature-all activities, services, and products, which is implemented by own hands not under industrial circumstences. The target group of the online questionnaire survey was the people that are involved in DIY. The questionnaire was shared by a decorator and her DIY Facebook page ("Juditu") on 3 October 2017. The size of the relevant sample was 270. The research questionnaire was built up from a demographic part, a part that is related to general DIY activity, and a part that sought to find the motivation of DIY members. The practice of DIY activities might be linked more to the personality and creativity; so, the group can be more homogeneously described along the common personality traits than by demographic variables. Among the motivations of DIYers the economic one (saving money) is not the most dominant. Analyses by interpretative index categories confirmed the hypothesis that it is difficult to separate one motivational force from the other; in many cases, one catalysing force generates the other, thus a complex multifactorial motivational set dominates the study target group. From the three groups, which were identified by analysing the motivations, in two groups those individuals are dominant, which use DIY activities to express their own inner world, and for whom spending time creatively, making something alone and for themselves, and creating something useful and valuable, is very important. These results were novel and, naturally, they can be perfect starting points of further studies because of the intactness of the research topic.}, - keywords = {Consumption,DIY,Handicraft culture,identity,Lifestyle}, - file = {/Users/fabio/Zotero/storage/KZLZ8L7K/full-text.pdf} -} - -@article{KhaleequzZaman2017, - title = {Integrated Product-Process Design to Suggest Appropriate Manufacturing Technology: A Review}, - author = {{Khaleeq uz Zaman}, Uzair and Siadat, Ali and Rivette, Mickael and Baqai, Aamer Ahmed and Qiao, Lihong}, - year = {2017}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {91}, - number = {1-4}, - pages = {1409--1430}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-016-9765-z}, - abstract = {The materials and manufacturing processes are evolving very rapidly subject to today's high performance, shorter lead times, and high part complexity needs. With over 80,000 materials, various manufacturing technologies (additive and traditional), diverse streams of application (aerospace, motor vehicles, health care, etc.), and high cost incurred due to manufacturability of the part, it has become essential to choose the right compromise of technology resource in early stages of design considering the Design for Manufacturing (DFM)/Design for Additive Manufacturing (DFAM) guidelines. The concerned literature to date focuses on manufacturing technology selection by being either part specific or application specific. As multiple criteria are involved for decision making, this paper provides a thorough review on the following questions: (1) What are the common design criteria used in literature for additive and traditional manufacturing technologies with respect to product-process integration? (2) What is the literature contribution for material and manufacturing process selection strategies with special focus on comparison of additive and traditional manufacturing technologies? The paper attempts to provide as a result a basic generic methodology for resource selection (RS) which will not only take into account all of the areas of application, DFM/DFAM guidelines, and three design criteria (function, cost, and environment), but will also discuss avenues for collaborative product development. A complex industrial case study is also presented to test the proposed methodology.}, - keywords = {Design for Additive Manufacturing (DFAM),Design for Manufacturability (DFM),Integrated product-process design (IPPD),Manufacturing resource selection}, - file = {/Users/fabio/Zotero/storage/C6FFAMAW/Integrated product-process design to suggest appropriate manufacturing technology a review.pdf} -} - -@article{khalidMicroplasticsCouldBe2020, - title = {Microplastics Could Be a Threat to Plants in Terrestrial Systems Directly or Indirectly}, - author = {Khalid, Noreen and Aqeel, Muhammad and Noman, Ali}, - year = {2020}, - month = dec, - journal = {Environmental Pollution}, - volume = {267}, - pages = {115653}, - publisher = {{Elsevier}}, - issn = {0269-7491}, - doi = {10.1016/J.ENVPOL.2020.115653}, - urldate = {2022-01-13}, - abstract = {Microplastics (MPs) are an emerging threat to ecosystem functioning and biota. The major sources of MPs are terrestrial and agricultural lands. But their fate, concentration in the terrestrial environment, and effects on soil and biota are poorly understood. There is a growing body of concern about the adverse effects of MPs on soil-dwelling organisms such as microbes in mycorrhizae and earthworms that mediate essential ecosystem services. Environmental concentrations and effects of MPs are considered to increase with increasing trend of its global production. MPs in the soil could directly impact plants through blocking the seed pore, limiting the uptake of water and nutrient through roots, aggregation, and accumulation in the root, shoot, and leaves. However, MPs can also indirectly impact plants by affecting soil physicochemical characteristics, soil-dwelling microbes, and fauna. An affected soil could impact plant community structure and perhaps primary production. In this article, we have assessed the potential direct and indirect impacts of MPs on plants. We have discussed both the positive and negative impacts of MPs on plants in terrestrial systems based on currently available limited literature on this topic and our hypothetical understandings. We have summarized the most current progress in this regard highlighting the future directions on microplastic research in terrestrial systems.}, - pmid = {33254725}, - keywords = {Emerging pollutant,Microplastic uptake,Phytotoxicity,Sorbed chemicals} -} - -@article{Khan2019, - title = {Understanding Consumers' Behavior Intentions towards Dealing with the Plastic Waste: {{Perspective}} of a Developing Country}, - author = {Khan, Farhana and Ahmed, Waqar and Najmi, Arsalan}, - year = {2019}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {142}, - pages = {49--58}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2018.11.020} -} - -@article{khanAssessingDeterminantsIntentions2020, - ids = {Khan2020}, - title = {Assessing the Determinants of Intentions and Behaviors of Organizations towards a Circular Economy for Plastics}, - author = {Khan, Owais and Daddi, Tiberio and Slabbinck, Hendrik and Kleinhans, Kerstin and {Vazquez-Brust}, Diego and De Meester, Steven}, - year = {2020}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {163}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105069}, - urldate = {2020-08-09}, - abstract = {The production and consumption of plastics, although inevitable in our modern life, are predominantly unsustainable and inefficient. Hence, the concept of a circular economy for plastics has been proposed as a sustainable approach to thrive both economy and our modern life. To implement a circular economy for plastics, an understanding of both individuals' and organizations' behaviors is needed since psychological effects often undermine technical solutions. We particularly focus on organizations' behaviors since commercial plastic waste has not been thoroughly investigated compared to household plastic waste. Using the Theory of Planned Behavior (TPB) and Partial Least Squares Structural Equation Modeling (PLS-SEM), we assess the determinants of intentions and behaviors of 637 organizations in Belgium towards a circular economy for plastics. Our PLS-SEM analysis support that attitudes, subjective norms, and perceived behavioral control of decision makers positively influence organizations' intentions to implement best practices of plastic recycling. Furthermore, organizations' intentions, perceived behavioral control, pressures, and enablers positively, whereas barriers negatively, influence organizations' behaviors. Our study shows that most organizations have positive intentions, yet they seem to be failing in implementing best practices of plastic recycling due to some critical barriers. To overcome this intention-behavior gap and to attain a circular economy for plastics, our study suggests some measures.}, - keywords = {Barriers,Circular economy,Plastic recycling,Plastic waste,PLS-SEM,Theory of Planned Behavior}, - file = {/Users/fabio/Zotero/storage/LY353EZI/full-text.pdf} -} - -@article{khanIndustrySustainableDevelopment2021, - title = {Industry 4.0 and Sustainable Development: {{A}} Systematic Mapping of Triple Bottom Line, {{Circular Economy}} and {{Sustainable Business Models}} Perspectives}, - author = {Khan, Iqra Sadaf and Ahmad, Muhammad Ovais and Majava, Jukka}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {297}, - pages = {126655}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126655}, - urldate = {2021-04-20}, - abstract = {Industry 4.0 has been identified as a major contributor to the era of digitalisation. Its implications for sustainable development have gained widespread attention from the perspectives of the triple bottom line, sustainable business models and circular economy. The purpose of this paper is to map the broad field of sustainable development and investigate the key research areas which comprises the aforementioned perspectives under Industry 4.0 framework. A systematic mapping review was conducted by searching five databases for relevant literature published between January 1, 2012 and April 17, 2020. The search yielded 4291 papers of which 81 were identified as primary papers relevant to the research herein. The primary findings are that the majority of sustainability research focuses on conceptual analysis, and the Internet of Things is dominantly cited with an emphasis on achieving the triple bottom line benefits. Sustainable development in the Industry 4.0 context contributes to circular economic objectives by achieving social, economic, and environmental benefits. Triple bottom line studies mainly focus on Industry 4.0 adoption and implementation, sustainable supply chains, smart and sustainable cities, and smart factories. Circular economy and sustainable business models as emerging research themes that focus on Industry 4.0 adoption and implementation, as well as sustainable supply chains. Our analysis consolidates emerging research patterns areas in both the Industry 4.0 and sustainability literature. Furthermore, it identifies salient research gaps and suggests future research.}, - keywords = {Circular economy,Industry 4.0,Sustainable business models,Sustainable development,Triple bottom line}, - file = {/Users/fabio/Zotero/storage/732GCC6S/full-text.pdf} -} - -@article{Khanna2009, - title = {Modeling the Risks to Complex Industrial Networks Due to Loss of Natural Capital}, - author = {Khanna, Vikas and Bakshi, Bhavik R.}, - year = {2009}, - journal = {2009 IEEE International Symposium on Sustainable Systems and Technology, ISSST '09 in Cooperation with 2009 IEEE International Symposium on Technology and Society, ISTAS}, - pages = {1--6}, - publisher = {{IEEE}}, - doi = {10.1109/ISSST.2009.5156771}, - abstract = {Several recent events in the U.S. have highlighted the criticality and vulnerability of infrastructure systems to sudden shocks such as natural disasters, terrorist attacks, and food shortages. Proper understanding of such disruptive scenarios and their impact using holistic and integrated systems modeling techniques is crucial for effective resource allocation and disaster management. An Input-Output (IO) based framework is presented for studying the effect of sudden shocks and quantifying the associated risks on complex industrial networks. We are specifically using the IO model to understand the impact of changes in the availability of natural resources including natural capital on industrial systems. This includes understanding the potential impact of loss of services such as pollination, water scarcities, and soil fertility. The utility of the framework is highlighted using two case studies involving loss of pollination services provided by managed honeybees and reduction in the availability of crude oil. The approach is suitable for modeling the effect of sudden perturbations such as resource shortage on the complex industrial systems and identifying industrial sectors with greatest sensitivity to a given perturbation. This work is expected to complement the traditional biophysical models and methods by including the behavior of complex industrial networks under sudden shocks, quantifying the associated risks and support a decision-making framework for risk management.}, - isbn = {9781424434565}, - keywords = {Industrial sectors,Inoperability,Input-output model,Natural capital}, - file = {/Users/fabio/Zotero/storage/AH93QXYH/Modeling_the_risks_to_complex_industrial_networks_due_to_loss_of_natural_capital.pdf} -} - -@article{khanSensingSeizingReconfiguring2020, - title = {Sensing, {{Seizing}}, and {{Reconfiguring}}: {{Key Capabilities}} and {{Organizational Routines}} for {{Circular Economy Implementation}}}, - author = {Khan, Owais and Daddi, Tiberio and Iraldo, Fabio}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125565}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125565}, - urldate = {2020-12-21} -} - -@article{khatamiEfficiencyConsumerBehaviour2023, - title = {Efficiency of Consumer Behaviour and Digital Ecosystem in the Generation of the Plastic Waste toward the Circular Economy}, - author = {Khatami, Fahimeh and Vilamov{\'a}, {\v S}{\'a}rka and Cagno, Enrico and De Bernardi, Paola and Neri, Alessandra and Cantino, Valter}, - year = {2023}, - month = jan, - journal = {Journal of Environmental Management}, - volume = {325}, - pages = {116555}, - issn = {0301-4797}, - doi = {10.1016/j.jenvman.2022.116555}, - urldate = {2022-11-10}, - abstract = {A circular economy can help reduce the impact of plastic waste using reaction, resilient, and digital approaches. In addition, it can facilitate reducing plastic consumption. In this regard, consumer behaviour and digitalization are deemed to be two main factors that play major roles in the implementation of a circular economy of plastic waste. The idea of this paper is to understand the relevance of consumer behaviour and digital ecosystem efficiency on plastic waste at the country level. Hence, the efficiency of eight European countries in the generation of plastic waste was analysed using international databases and the statistical method of receiver operation characteristic (ROC). For this purpose, the dependent actual state variables were defined as plastic waste generations, and the independent test variables were defined as digital ecosystem and consumer behaviour factors. ROC plots for the determination of the area under the curve (AUC) indices were produced between the mentioned state and test variables. The results revealed that consumer behaviour increases the higher generation of plastic waste (AUC {$>$}0.6), indicating that consumer behaviours have high effectiveness on the generation of plastic waste in European countries. Furthermore, the results indicated that the digital ecosystem has a controlling role in the generation of plastic waste in the study area (AUC {$<$}0.5), indicating the digital ecosystem factors associated with the low generation of plastic waste. The overall consumer behaviour in the selected European countries showed an unskilled role regarding the higher generation of plastic waste, while the digital ecosystem context showed a mitigating role in decreasing plastic pollution. The confirmation of the research hypotheses leads to some managerial propositions for the circular economy of plastic waste in the area of consumer behaviour and digitalization. The results propose an elaborated framework, including a reduction in waste generation, recycling in waste circulation, recovery in waste valorization, and efficiency in resource consumption by the digitalization of design technology and education in consumer behaviour for the circular management of plastic waste.}, - langid = {english}, - keywords = {Circular economy,Consumer behaviour,Digital ecosystem,European countries,Plastic waste,Receiver operation characteristic (ROC)}, - file = {/Users/fabio/Zotero/storage/N88WGM4Y/S0301479722021284.html} -} - -@article{khatunBibliometricAnalysisResearch2021, - ids = {khatun2021a}, - title = {Bibliometric Analysis of Research Trends on the Thermochemical Conversion of Plastics during 1990\textendash 2020}, - author = {Khatun, Roomana and Xiang, Huan and Yang, Yang and Wang, Jiawei and Yildiz, G{\"u}ray}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {317}, - pages = {128373}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128373}, - urldate = {2021-08-23}, - abstract = {The aim of this bibliometric analysis was to evaluate the trends in literature and the impact of publications that have been published during the period 1990\textendash 2020, in the field of thermochemical conversion of plastics, namely gasification, liquefaction and pyrolysis. SCOPUS was used and data was vetted via MS Excel, with analysis being completed via MS Excel and VOSViewer. A total of 1705 publications were used in the study, and China was identified as the most productive country. Pyrolysis was the most researched technology with over 88\% of publications, while liquefaction accounted for less than 3\% of the total publications. Across all three technologies, polyethylene (PE) was the most commonly occurring type of plastic. Journal of Analytical and Applied Pyrolysis had the highest number of publications and total citations. However, Energy Conversion and Management had a higher impact factor and higher average citations per publication. University of Alicante was identified as the most productive university with a total of 45 publications, while University of Leeds was the most commonly cited with an average of 65 citations per publication. The keyword analysis showed that co-pyrolysis with biomass and catalytic pyrolysis are gaining increased interests.}, - file = {/Users/fabio/Zotero/storage/GF58XAP7/Khatun et al. - 2021 - Bibliometric analysis of research trends on the th.pdf} -} - -@article{kheirandishComprehensiveValueFramework2020, - title = {A Comprehensive Value Framework for Design}, - author = {Kheirandish, Shadi and Funk, Mathias and Wensveen, Stephan and Verkerk, Maarten and Rauterberg, Matthias}, - year = {2020}, - month = aug, - journal = {Technology in Society}, - volume = {62}, - pages = {101302}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101302}, - urldate = {2020-07-14}, - abstract = {The significance of human values in everyday life highlights the integral role of this concept in any design that aims to improve the quality of human life. By emphasizing the need for a comprehensive value framework for design, the present study explores a new value framework to be used as a common ground in design. For this purpose, we empirically investigate how different people group human values. By spreading the link of our Human Values Survey worldwide via the internet, a variety of participants with different cultural backgrounds were reached, and hierarchical cluster analysis was used to analyze the data. As a result, 568 complete answers were collected, from which nine value groups were concluded: ``carefulness'', ``justice'', ``ecology'', ``respect for others'', ``meaningfulness'', ``status'', ``pleasure'', ``respect for oneself'' and ``personal development''. After clustering our data, we propose a value framework with four themes, nine value groups, 42 key values, and 135 extra values. This framework, raising designers' awareness and widening their view of human values, provides the opportunity to address a diverse range of human values in design.}, - keywords = {Cluster analysis,Design studies,Empirical research,Human values,Interdisciplinarity,Value framework}, - file = {/Users/fabio/Zotero/storage/N7EICGJV/full-text.pdf} -} - -@article{khitousSystematicLiteratureNetwork2020, - title = {A Systematic Literature Network Analysis of Existing Themes and Emerging Research Trends in Circular Economy}, - author = {Khitous, Fatima and Strozzi, Fernanda and Urbinati, Andrea and Alberti, Fernando}, - year = {2020}, - month = feb, - journal = {Sustainability (Switzerland)}, - volume = {12}, - number = {4}, - publisher = {{MDPI}}, - issn = {20711050}, - doi = {10.3390/SU12041633}, - urldate = {2022-03-13}, - abstract = {The debate about Circular Economy (CE) has been increasingly enriched by academics through a vast array of contributions, based on several theoretical perspectives and emanating from several research domains. However, current research still falls short of providing a holistic and broader view of CE, one that combines existing themes and emerging research trends. Accordingly, based on a Systematic Literature Network Analysis, this paper tackles this gap. First, a Citation Network Analysis is used to unearth the development of the CE literature based on papers' references, whilst the Main Path is traced to detect the seminal papers in the field through time. Second, to consider the literature in its broader extent, a Keywords Co-Occurrence Network Analysis is conducted based on papers' keywords, whereby all papers in the dataset, including the non-cited papers, are assessed. Additionally, a Global Citation Score analysis is conducted to uncover the recent breakthrough research, in addition to the Burst Analysis used to detect the dynamic development of CE literature over time. By doing so, the paper explores the development of the CE body of knowledge, reveals its dynamic evolution over time, detects its main theoretical perspectives and research domains, and highlights its emerging topics. Our findings unfold the evidence of eight main trends of research about CE, unearth the path through which the CE concept emerged and has been growing, and concludes with promising avenues for future research.}, - keywords = {Bibliometric analysis,Circular economy,Citation network,Co-occurrence network,Main path,Research trends} -} - -@article{Khmara2020, - title = {Degrowth in the Context of Sustainability Transitions: {{In}} Search of a Common Ground}, - author = {Khmara, Yaryna and Kronenberg, Jakub}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {267}, - pages = {122072}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122072}, - urldate = {2020-05-26}, - abstract = {The aim of this article is to study how the sustainability transitions analytical framework can help to make other concepts of sustainable socio-economic development more specific and operational. Specifically, we investigate the linkages between sustainability transitions and degrowth. Based on a literature review of both degrowth and sustainability transitions, we distinguish several aspects that provide a common ground for both approaches. We identify degrowth as one of the most far-reaching forms of sustainability transitions but suggest that it would benefit from a more stringent conceptualization using the analytical framework of sustainability transitions. To this end, we apply some conceptual notions from sustainability transitions theory to describe the idea of a degrowth transition. In particular, we analyze two case studies of degrowth practices (Cargonomia and a Transition Towns network) using the analytical framework of transition experiments. Sustainability transitions analytical frameworks and conceptual notions proved to be helpful interpretative lenses for looking at degrowth, and they can help to systematically structure its main postulates.}, - file = {/Users/fabio/Zotero/storage/FM4A3NYH/full-text.pdf} -} - -@article{Khondoker2019, - title = {Direct Coupling of Fixed Screw Extruders Using Flexible Heated Hoses for {{FDM}} Printing of Extremely Soft Thermoplastic Elastomers}, - author = {Khondoker, Mohammad Abu Hasan and Sameoto, Dan}, - year = {2019}, - month = sep, - journal = {Progress in Additive Manufacturing}, - volume = {4}, - number = {3}, - pages = {197--209}, - publisher = {{Springer International Publishing}}, - issn = {2363-9512}, - doi = {10.1007/s40964-019-00088-4}, - isbn = {4096401900}, - keywords = {additive manufacturing,Additive manufacturing,F,fused deposition modeling,Fused deposition modeling,fused pellet printing,pellet,thermoplastic elastomer}, - file = {/Users/fabio/Zotero/storage/QV2XQPDW/Direct coupling of fixed screw extruders using flexible heated hoses for FDM printing of extremely soft thermoplastic elastomers.pdf} -} - -@article{KhorramNiaki2016, - title = {Additive Manufacturing Management: A Review and Future Research Agenda}, - author = {Khorram Niaki, Mojtaba and Nonino, Fabio}, - year = {2016}, - journal = {International Journal of Production Research}, - volume = {7543}, - number = {September}, - pages = {1--21}, - issn = {0020-7543}, - doi = {10.1080/00207543.2016.1229064}, - file = {/Users/fabio/Zotero/storage/7T66UBXL/Additive manufacturing management a review and future research agenda.pdf} -} - -@article{KhorramNiaki2018, - title = {Economic Sustainability of Additive Manufacturing}, - author = {Khorram Niaki, Mojtaba and Nonino, Fabio and Palombi, Giulia and Torabi, S. Ali}, - year = {2019}, - month = feb, - journal = {Journal of Manufacturing Technology Management}, - volume = {30}, - number = {2}, - pages = {353--365}, - issn = {1741-038X}, - doi = {10.1108/JMTM-05-2018-0131}, - isbn = {1120160332}, - file = {/Users/fabio/Zotero/storage/USTL98QL/Economic sustainability of additive manufacturing- Contextual factors driving its performance in rapid prototyping.pdf} -} - -@article{Khudiakova2019, - title = {Inter-Layer Bonding Characterisation between Materials with Different Degrees of Stiffness Processed by Fused Filament Fabrication}, - author = {Khudiakova, A and Arbeiter, F and Spoerk, M and Wolfahrt, M and Godec, D and Pinter, G}, - year = {2019}, - month = aug, - journal = {Additive Manufacturing}, - volume = {28}, - number = {March}, - pages = {184--193}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.05.006}, - keywords = {Cracked round beam test,Digital image correlation,Double cantilever beam test,Fracture mechanics,fused filament fabrication,Fused filament fabrication}, - file = {/Users/fabio/Zotero/storage/S2UB5JHR/Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication.pdf} -} - -@article{Kianian2015, - title = {The Role of {{Additive Manufacturing}} Technology in Job Creation: {{An}} Exploratory Case Study of Suppliers of {{Additive Manufacturing}} in {{Sweden}}}, - author = {Kianian, Babak and Tavassoli, Sam and Larsson, Tobias C.}, - year = {2015}, - journal = {Procedia CIRP}, - volume = {26}, - pages = {93--98}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2014.07.109}, - abstract = {This paper investigates how Additive Manufacturing (AM) technologies, as a process innovation, may contribute to a job creation. Further, the various mechanisms in which AM may contribute to an increase in job creation as well as the types of jobs are analyzed. The analysis also goes beyond AM technologies and incorporates other non-technological factors which foster job creation, i.e. higher wages in BRIC countries, lower quality in BRIC countries, and a rising demand for western-made products. The analysis is based on a case study and the data collected was through interviews with three prominent actors within the AM technologies field in Sweden: technology developers, leading suppliers and users. The main findings indicate that AM (i) contributes to job creation in both the manufacturing sector and in the service sector, (ii) does not bring back mass production jobs from emerging economies such as BRIC, (iii) contributes to job creation in product development stages (e.g. rapid prototyping), and (iv) contributes to job creation in production stages of low-volume batches mainly of complex products. The findings also suggest there are barriers for full exploitation of AM in several areas, including education systems.}, - isbn = {2212-8271}, - keywords = {3D printing,Additive manufacturing technologies,Exploratory case study,Job creation,Sweden}, - file = {/Users/fabio/Zotero/storage/LAUFUEE7/The role of Additive Manufacturing technology in job creation An exploratory case study of suppliers of Additive Manufacturing in Sweden.pdf} -} - -@article{Kianian2016, - title = {The {{Adoption}} of {{Additive Manufacturing Technology}} in {{Sweden}}}, - author = {Kianian, Babak and Tavassoli, Sam and Larsson, Tobias C. and Diegel, Olaf}, - year = {2016}, - journal = {Procedia CIRP}, - volume = {40}, - pages = {7--12}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2016.01.036}, - abstract = {This paper analyzes the adoption of Additive Manufacturing (AM) technologies in Sweden. The dataset consists of a recent and representative sample of Swedish AM users (companies, universities, and research institutes). The authors investigate two questions. Firstly, what are the current applications of AM in Sweden (e.g. Rapid Prototyping (RP), production)? Secondly, what are the factors that can explain the variation in AM adoption among the users? Using a regression analysis technique, the main findings are as follows. (i) There is a variation among users' choice of AM application, and the majority of users are expanding their AM applications beyond RP. (ii) There are two factors that positively affect the decision of firms to expand classical RP and also incorporate production and management. These two factors are using multiple AM technologies (as opposed to single Fused Deposition Modeling technology) and being small companies. The authors discuss the implication of these results.}, - isbn = {2212-8271}, - keywords = {3D Printing,Additive Manufacturing,Application,Production Technology,Sweden}, - file = {/Users/fabio/Zotero/storage/5ZHIPFWN/The Adoption of Additive Manufacturing Technology in Sweden.pdf} -} - -@article{Kibert1992, - title = {Recycling Post-Consumer Polymers into Construction Materials}, - author = {Kibert, C. J. and Waller, D. L.}, - year = {1992}, - journal = {Construction and Building Materials}, - volume = {6}, - number = {2}, - pages = {67--75}, - issn = {09500618}, - doi = {10.1016/0950-0618(92)90054-3}, - abstract = {The construction industry is one of the major consumers of polymers and a significant potential customer for recycled plastics products. The growing problems with municipal solid waste (MSW) disposal space, the proliferation of polymer products, and public awareness of environmental issues makes it necessary for the construction industry to become actively involved in post-consumer polymer recycling efforts. Technical problems with utilisation of post-consumer polymers, potential recycled plastics products, and other related issues are covered to provide an understanding of the current status of plastics recycling technology as it relates to construction materials. ?? 1992.}, - file = {/Users/fabio/Zotero/storage/32WYM78V/Kibert, Waller - 1992 - Recycling post-consumer polymers into construction materials.pdf} -} - -@article{Kidd1999, - title = {The Aware Home: {{A}} Living Laboratory for Ubiquitous Computing Research}, - author = {Kidd, Cory D and Orr, Robert and Abowd, Gregory D and Atkeson, Christopher G and Essa, Irfan A and MacIntyre, Blair and Mynatt, Elizabeth and Starner, Thad E and Newstetter, Wendy}, - year = {1999}, - journal = {Cooperative buildings. \ldots}, - pages = {191--198}, - issn = {10916490}, - doi = {10.1007/10705432_17}, - abstract = {We are building a home, called the Aware Home, to create a living laboratory for research in ubiquitous computing for everyday activities. This paper introduces the Aware Home project and outlines some of our technology- and human-centered research objectives in creating the Aware Home.}, - isbn = {3-540-66596-X}, - pmid = {20368446}, - keywords = {applica-,context-awareness,home,sensors,ubiquitous computing} -} - -@techreport{Kieboom2014, - title = {Lab {{Matters}}: {{Challenging}} the Practice of Social Innovation Laboratories | {{Kennisland}}}, - author = {Kieboom, Marlieke}, - year = {2014}, - month = may, - pages = {1--44}, - address = {{Amsterdam}}, - institution = {{Kennisland}}, - abstract = {The paper aims to move beyond the current lab hype and deepen our discussions by asking ourselves tough questions. How do we `lab' social challenges? Does labs' pursuit of systemic impact miss the point? And how could we better prompt social change?} -} - -@techreport{Kieboom2015, - title = {Lab {{Practice}}: Creating Spaces for Social Change | {{Kennisland}}}, - author = {Kieboom, Marlieke and {van Exel}, Thijs and Sigaloff, Chris}, - year = {2015}, - month = jun, - pages = {1--81}, - address = {{Amsterdam}}, - institution = {{Kennisland}}, - abstract = {How to organise and run a social lab? Lab Practice aims to share experiences from doing a social lab with elderly people in Amsteldorp by sharing methodologies and stories from both changemakers and social lab facilitators.} -} - -@article{kiesslingWhatPotentialDoes2023, - title = {What Potential Does the {{EU Single-Use Plastics Directive}} Have for Reducing Plastic Pollution at Coastlines and Riversides? {{An}} Evaluation Based on Citizen Science Data}, - shorttitle = {What Potential Does the {{EU Single-Use Plastics Directive}} Have for Reducing Plastic Pollution at Coastlines and Riversides?}, - author = {Kiessling, Tim and Hinzmann, Mandy and Mederake, Linda and Dittmann, Sinja and Brennecke, Dennis and {B{\"o}hm-Beck}, Marianne and Knickmeier, Katrin and Thiel, Martin}, - year = {2023}, - month = jun, - journal = {Waste Management}, - volume = {164}, - pages = {106--118}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.03.042}, - urldate = {2023-05-10}, - abstract = {To address environmental pollution by plastic litter, the European Union adopted EU Directive 2019/904, the so called ``Single-Use Plastics Directive'' (SUPD), which bans several single-use plastic products and addresses additional items with measures such as extended producer responsibility and obligatory requirements for product redesign. This study assessed the potential of the SUPD to reduce litter pollution in the environment with three scenarios. The ``best case'' scenario assumed that all measures of the SUPD completely prevent targeted items from getting into the environment. Another scenario assumed that no measures besides bans were effective. An intermediate scenario assumed partial effectiveness of measures. Data of almost 5,000 sampling events from citizen science protocols (Plastic Pirates, International Coastal Cleanup, Marine Litter Watch) and the OSPAR protocol were used to analyse litter at riversides and coastlines in Germany and the European Union. 44 to 68\% of litter items in citizen science protocols consisted of single-use plastics (cigarette butts were the most prominent items). At coastlines sampled by the OSPAR protocol, fishing gear and undefined plastics prevailed. The scenario analysis revealed that substantial litter reductions could be achieved in the ``best case'' scenario (upwards of 40\%), while the intermediate scenario resulted in litter reductions of 13 to 25\%. The marginal effect of the ``only bans'' scenario achieved a reduction of 2\textendash 6\% in Germany and the European Union, respectively. Thus, depending on implementation and enforcement, the current SUPD can be an important first step, yet further legislative actions are needed to effectively prevent plastic waste pollution.}, - langid = {english}, - keywords = {Citizen science,EU Directive 2019/904,EU legislation,Plastic pollution,Single-use plastics}, - file = {/Users/fabio/Zotero/storage/AIEWZAP2/Kiessling et al. - 2023 - What potential does the EU Single-Use Plastics Dir.pdf;/Users/fabio/Zotero/storage/DFNUVEYU/S0956053X23002738.html} -} - -@article{Kietzmann2015, - title = {Disruptions, Decisions, and Destinations: {{Enter}} the Age of 3-{{D}} Printing and Additive Manufacturing}, - author = {Kietzmann, Jan and Pitt, Leyland and Berthon, Pierre}, - year = {2015}, - journal = {Business Horizons}, - volume = {58}, - number = {2}, - pages = {209--215}, - publisher = {{"Kelley School of Business, Indiana University"}}, - issn = {00076813}, - doi = {10.1016/j.bushor.2014.11.005}, - abstract = {Until recently, most manufacturing processes have been 'subtractive' in that matter is removed (e.g., scraped, dissolved, turned, machined) from a substance in order to produce the desired product. 3-D printing turns traditional manufacturing on its head in that it uses an 'additive' process. Similar to laser and inkjet printers, 3-D (three-dimensional) printers produce pieces by depositing, or adding, layers of material-plastic, polymer filaments, metals, and even foodstuffs-until the desired product is realized. This means that the creation and production of 'one-offs' is not only easy, it is also economically viable. 3-D printers are becoming ever more affordable, and it is not hard to envision them being as common in most homes in the near future as their two-dimensional counterparts are today. This article presents a 3-D printing primer for non-technical managers. It then considers the profound impact that 3-D printing will have on firms of all kinds as well as on individual consumers. In addition, it raises the substantial questions that 3-D printing will pose to policy makers from both intellectual property and ethical standpoints.}, - isbn = {0007-6813}, - pmid = {26402038}, - keywords = {3-D printing,3D printing,Additive manufacturing,Ethics,Intellectual property}, - file = {/Users/fabio/Zotero/storage/NVXKY5DL/Disruptions decisions and destinations Enter the age of 3-D printing and additive manufacturing (2015).pdf} -} - -@article{Kim2015, - title = {Emissions of {{Nanoparticles}} and {{Gaseous Material}} from {{3D Printer Operation}}}, - author = {Kim, Yuna and Yoon, Chungsik and Ham, Seunghon and Park, Jihoon and Kim, Songha and Kwon, Ohhun and Tsai, Perng-Jy}, - year = {2015}, - month = oct, - journal = {Environmental Science \& Technology}, - volume = {49}, - number = {20}, - pages = {12044--12053}, - issn = {0013-936X}, - doi = {10.1021/acs.est.5b02805}, - abstract = {This study evaluated the emissions characteristics of hazardous material during fused deposition modeling type 3D printing. Particulate and gaseous materials were measured before, during, and after 3D printing in an exposure chamber. One ABS and two PLA (PLA1 and PLA2) cartridges were tested three times. For online monitoring, a scanning mobility particle sizer, light scattering instrument, and total volatile organic compound (TVOC) monitor were employed and a polycarbonate filter and various adsorbent tubes were used for offline sampling. The particle concentration of 3D printing using ABS material was 33-38 times higher than when PLA materials were used. Most particles were nanosize ({$<$}100 nm) during ABS (96\%) and PLA1 (98\%) use, but only 12\% were nanosize for PLA2. The emissions rates were 1.61 \texttimes{} 1010 ea/min and 1.67 \texttimes{} 1011 ea/g cartridge with the ABS cartridge and 4.27-4.89 \texttimes{} 108 ea/min and 3.77-3.91 \texttimes{} 109 ea/g cartridge with the PLA cartridge. TVOCs were also emitted when the ABS was used (GM; 155 ppb, GSD; 3.4), but not when the PLA cartridges were used. Our results suggest that more research and sophisticated control methods, including the use of less harmful materials, blocking emitted containments, and using filters or adsorbents, should be implemented.}, - isbn = {0013936X (ISSN)}, - pmid = {26402038}, - file = {/Users/fabio/Zotero/storage/RCPVIPSN/Kim et al. - 2015 - Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation.pdf} -} - -@misc{Kim2016, - title = {Social Platform Innovation of Open Source Hardware in {{South Korea}}}, - author = {Kim, Taeyang and Shin, Dong Hee}, - year = {2016}, - month = jul, - journal = {Telemat. Informatics}, - volume = {33}, - number = {1}, - pages = {217--226}, - publisher = {{Elsevier Ltd}}, - issn = {07365853}, - doi = {10.1016/j.tele.2015.07.004}, - abstract = {This paper proposes the use of OSHW to successfully penetrate the Internet of Things (IoT) market by using a social platform with a new interdisciplinary perspective rather than through the use of existing technical approaches. Snowball sampling was used in this study to survey 300 people who work and have had experiences with online brand communities for open source hardware (OSHW) at Fab Lab Seoul. The findings of this study indicate that content, consumer support, user interface, and reward are among the five factors that trigger an online brand community to develop a social OSHW platform. However, this study also found that brand reputation was insignificant relative to activating a social media platform for open-source software. In addition, activating a social platform for OSHW can positively affect to the brand community's loyalty for OSHW, which means that social platform innovation for OSHW can help form the positive attitude necessary to develop and diffuse an OSHW culture in a rapidly changing ICT ecosystem. This can be an important strategy for OSHW business and can contribute to the growth of the IoT market in South Korea.}, - keywords = {Internet of Things (IoT),Open source hardware (OSHW),Social platform} -} - -@inproceedings{Kim2018a, - title = {A Performance Analysis of Lightweight Cryptography Algorithm for Data Privacy in {{IoT}} Devices}, - booktitle = {2018 Int. {{Conf}}. {{Inf}}. {{Commun}}. {{Technol}}. {{Converg}}.}, - author = {Kim, Young-Sae and Kim, Geonwoo}, - year = {2018}, - month = oct, - pages = {936--938}, - publisher = {{IEEE}}, - doi = {10.1109/ICTC.2018.8539592}, - isbn = {978-1-5386-5041-7} -} - -@article{Kim2019, - title = {{{3D Printed Thermoplastic Polyurethane Bladder}} for {{Manufacturing}} of {{Fiber Reinforced Composites}}}, - author = {Kim, Garam and Barocio, Eduardo and Pipes, R. Byron and Sterkenburg, Ronald}, - year = {2019}, - month = jul, - journal = {Additive Manufacturing}, - pages = {100809}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100809} -} - -@article{Kim2019a, - title = {A {{Study}} on {{Technology Development Performance}} and {{Technology Commercialization Performance According}} to the {{Technology Development Capability}} of {{SMEs Focusing}} on a {{Comparative Analysis}} of {{Technology Business Groups}}}, - author = {{Kim} and {Park} and {Joh}}, - year = {2019}, - month = aug, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {3}, - pages = {65}, - issn = {2199-8531}, - doi = {10.3390/joitmc5030065}, - abstract = {Recently, a lot of small- and mid-sized companies have emerged through continuous technological development and start-up successes despite insufficient scales and resources compared to medium companies or conglomerates in fierce market competition. Technological development capability, which is required to acquire, select, or utilize source technology for company competitiveness, becomes the competitive edge and key capability to gain distinctiveness. Accordingly, the objective of this research was to investigate the influential factors on performance by suggesting technological development results and technology commercialization as the outcome of technological development capability and to identify the capability required for successful technological development performance and technology commercialization for companies through previous academic research. Moreover, the study aimed to investigate performance differences according to technology business groups by dividing the groups into high-technology companies, medium-technology companies, and low-technology companies. As a result of the analysis, among the indicators constituting technological development capability, manpower in technological development and technological development-specialized research centers had a positive influence on the product competitiveness of technological development performance. Also, technological development expenses and technology skill levels were verified to have positive impacts on the technology competitiveness of technological development performance. As for technology commercialization performance, the more manpower that is in research and development, the higher the sales amounts by technological development; also, the higher the technology skill levels, the higher the export amounts by technological development. Moreover, technology business groups had differences in performance. This research has significance in focusing on the influence of the technological development capability of companies on technological development performance and technology commercialization performance. Future research is expected to draw new variations different from the analysis results from existing studies by setting variations, investigating complementary relationships among variations in detail, and utilizing statistical techniques that can control mutual relationships among variations.} -} - -@article{Kim2019b, - title = {Horizon Scanning in Policy Research Database with a Probabilistic Topic Model}, - author = {Kim, Hyunuk and Ahn, Sang Jin and Jung, Woo Sung}, - year = {2019}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {146}, - pages = {588--594}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2018.02.007}, - urldate = {2020-03-22}, - abstract = {National governments take advantage of collective intelligence when conducting foresight processes. They grasp emerging issues through expert reviews as well as public opinions. It raises national agendas and affects policy-making process. Therefore, by examining policy papers which contain societal issues, we can perceive past, current, and future environments. In this study, we exploit policy research database of Republic of Korea, which is a unique source that automatically collects all policy papers written by national research institutes, to extract latent topics and their trends over 10 years through a probabilistic topic model. Detected topics fairly correspond to expert-selected future drivers in national foresight report, implying that public discourse and policy agenda are coupled. We suggest to utilize open government data and text mining methods for building open foresight framework that various actors exchange their opinions on societal issues.}, - keywords = {Foresight,Horizon scanning,Latent Dirichlet allocation,Policy research database,Topic modeling} -} - -@article{kimaniBlockchainBusinessFourth2020, - title = {Blockchain, Business and the Fourth Industrial Revolution: {{Whence}}, Whither, Wherefore and How?}, - author = {Kimani, Danson and Adams, Kweku and {Attah-Boakye}, Rexford and Ullah, Subhan and {Frecknall-Hughes}, Jane and Kim, Ja}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120254}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120254}, - urldate = {2020-09-13}, - abstract = {Blockchain is one the most remarkable technological innovations of the 21st century. The most notable application of blockchain is in the development and operation of cryptocurrencies (e.g. bitcoin, ethereum, among others). Besides the financial services industry, blockchain is also considered in other sectors such as international trade, taxation, supply chain management, business operations and governance. However, blockchain has not been examined comprehensively in all areas of relevant literature. This article conducts a survey of the literature to gain an understanding of the opportunities and issues presented by blockchain in various business functions. The article begins by providing a discussion regarding how the blockchain technology operates. The paper takes a broad focus in its analysis of the prospects of blockchain for various business functions, including banking and the capital markets, corporate governance, international trade, and taxation. The paper demonstrates how organisations and regulators can leverage blockchain to upscale business operations, enhance efficiency and reduce operational costs. The key drawbacks of blockchain that stakeholders need to bear in mind before adopting the technology are also highlighted. The article also reflects on how organisations can tap into blockchain to reap the full potential of the fourth industrial revolution.}, - keywords = {Blockchain,Business functions,Fintech,Fourth industrial revolution,Technological innovations} -} - -@article{kimAugmentSDGIndicator2023, - title = {Augment the {{SDG}} Indicator Framework}, - author = {Kim, Rakhyun E.}, - year = {2023}, - month = apr, - journal = {Environmental Science \& Policy}, - volume = {142}, - pages = {62--67}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2023.02.004}, - urldate = {2023-02-13}, - abstract = {The 231 indicators of the Sustainable Development Goals (SDGs) are crucial for measuring progress on 169 targets. But the seemingly large number of indicators and the associated cost of monitoring have led to calls for streamlining. Here I present an alternative perspective on the SDG indicators by paying due regard to their performativity, or ability to shape outcomes. By drawing on the literature on conditions under which indicators have unintended consequences, I argue that there are rather limited, chiefly quantitative indicators to adequately address the multifaceted aspects of diverse targets they serve. The SDG indicators in their current form run the risk of `the tail wagging the dog' by powering over their targets. Further streamlining the indicator framework would likely exacerbate the risk, and undermine the ambition, integrity, and legitimacy of the SDGs. The analysis recommends augmenting the indicator framework and integrate indicator development into future negotiations of global goals and targets.}, - langid = {english}, - keywords = {Campbell's law,Global goals,Goodhart's law,Indicators,Performativity,Sustainable Development Goals}, - file = {/Users/fabio/Zotero/storage/8K7VND26/Kim_2023_Augment the SDG indicator framework.pdf;/Users/fabio/Zotero/storage/YK4NAWQ6/S1462901123000370.html} -} - -@article{kimHowDevelopDatadriven2021, - title = {How to Develop Data-Driven Technology Roadmaps:{{The}} Integration of Topic Modeling and Link Prediction}, - author = {Kim, Junhan and Geum, Youngjung}, - year = {2021}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {171}, - pages = {120972}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120972}, - urldate = {2021-07-05} -} - -@article{kimLifeCycleAnalysis2022, - title = {Life Cycle Analysis of Polylactic Acids from Different Wet Waste Feedstocks}, - author = {Kim, Taemin and Bhatt, Arpit and Tao, Ling and Benavides, Pahola Thathiana}, - year = {2022}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {380}, - pages = {135110}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.135110}, - urldate = {2022-12-12}, - abstract = {Producing a valuable chemical product through diversion of wet wastes can simultaneously resolve the problems associated with increasing wastes and greenhouse gas emissions from conventional chemical production processes. In this work, we investigated the life-cycle greenhouse gas emissions, water, and fossil-fuel consumption for waste-derived polylactic acids (PLA) from three different waste feedstocks, namely wastewater sludge, food waste, and swine manure, using the Greenhouse Gases, Regulated Emissions, and Energy Use in Technologies (GREET) model. The decarbonization potential of replacing fossil-based resins with the waste-derived polymer was also investigated. The results show that swine manure-to-PLA pathway was the least carbon intensive (-1.4 kgCO2e/kg) among the three waste-to-PLA pathways on a cradle-to-grave basis, followed by the food waste case (-1.3 kgCO2e/kg) and then by the wastewater sludge case (0.6 kgCO2e/kg). In the baseline scenario, all three waste-to-PLA pathways were less carbon intensive than both fossil-based PET and HDPE on a cradle-to-grave basis: 66\% (vs. PET) and 56\% (vs. HDPE), 171 and 192\%, 181 and 205\% reduction in GHG emissions for wastewater sludge-, food waste-, and swine manure-to-PLA pathway, respectively. For all sensitivity cases investigated, the food waste- and swine manure-to-PLA pathways were significantly less carbon intensive than their fossil-counterparts. In terms of the annual decarbonization potential of replacing fossil-based PET or HDPE, the wastewater sludge- and food waste-pathway showed higher mitigation potential than the swine manure-pathway: i) 18\textendash 28 kilotons CO2e-reduction per year for wastewater sludge pathway; ii) 23\textendash 26 kTCO2e-reduction/yr for food waste pathway; and iii) about 5 kTCO2e-reduction/yr for swine manure pathway depending on the type of conventional resin replaced. However, given the abundant availability of the swine manure feedstocks across the United States, the decarbonization potential of swine manure-based pathway can also increase as the plant capacity or the number of plants grow.}, - langid = {english}, - keywords = {Biopolymer,Decarbonization,Life-cycle analysis,Polylactide,Waste diversion}, - file = {/Users/fabio/Zotero/storage/EGIX22AG/Kim et al_2022_Life cycle analysis of polylactic acids from different wet waste feedstocks.pdf;/Users/fabio/Zotero/storage/6X3K79JD/S0959652622046844.html} -} - -@article{kimNonisothermalNonNewtonianThreedimensional2022, - title = {Non-Isothermal Non-{{Newtonian}} Three-Dimensional Flow Simulation of Fused Filament Fabrication}, - author = {Kim, Sun Kyoung and Kazmer, David O.}, - year = {2022}, - month = jul, - journal = {Additive Manufacturing}, - volume = {55}, - pages = {102833}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102833}, - urldate = {2022-05-23} -} - -@article{kimWhatMakesWeak2023, - title = {What {{Makes Weak Ties Strong}}?}, - author = {Kim, Minjae and Fernandez, Roberto M.}, - year = {2023}, - journal = {Annual Review of Sociology}, - volume = {49}, - number = {1}, - pages = {177--193}, - doi = {10.1146/annurev-soc-030921-034152}, - urldate = {2023-08-31}, - abstract = {We raise two challenges concerning the validity of arguments underlying Granovetter's strength of weak ties (SWT) thesis: (a) whether weak ties are actually bridges, i.e., they help reach more socially distant actors than strong ties, and (b) whether weak ties transmit information effectively enough so that weak ties' alleged structural properties make them more useful than strong ties. In the course of reviewing subsequent research that has made progress in addressing these challenges, we identify both potential limits and possibilities for the SWT thesis. We argue for the importance of identifying how actors' agency\textemdash i.e., the way people use their ties\textemdash may affect social networks' value. We conclude by summarizing some outstanding questions that progress on the SWT thesis has generated.}, - keywords = {bridging ties,computational social science,diffusion,social networks,strength of weak ties,structure versus agency}, - file = {/Users/fabio/Zotero/storage/VL2KBA96/Kim_Fernandez_2023_What Makes Weak Ties Strong.pdf} -} - -@article{King2014, - title = {Mobile {{Open-Source Solar-Powered}} 3-{{D Printers}} for {{Distributed Manufacturing}} in {{Off-Grid Communities}}}, - author = {King, Debbie L. and Babasola, Adegboyega and Rozario, Joseph and Pearce, Joshua M.}, - year = {2014}, - month = oct, - journal = {Challenges in Sustainability}, - volume = {2}, - number = {1}, - issn = {2297-6477}, - doi = {10.12924/cis2014.02010018}, - abstract = {Manufacturing in areas of the developing world that lack electricity severely restricts the technical sophistication of what is produced. More than a billion people with no access to electricity still have access to some imported higher-technologies; however, these often lack customization and often appropriateness for their community. Open source appropriate technology (OSAT) can over- come this challenge, but one of the key impediments to the more rapid development and distri- bution of OSAT is the lack of means of production beyond a specific technical complexity. This study designs and demonstrates the technical viability of two open-source mobile digital manufacturing facilities powered with solar photovoltaics, and capable of printing customizable OSAT in any com- munity with access to sunlight. The first, designed for community use, such as in schools or maker- spaces, is semi-mobile and capable of nearly continuous 3-D printing using RepRap technology, while also powering multiple computers. The second design, which can be completely packed into a standard suitcase, allows for specialist travel from community to community to provide the ability to custom manufacture OSAT as needed, anywhere. These designs not only bring the possibility of complex manufacturing and replacement part fabrication to isolated rural communities lacking access to the electric grid, but they also offer the opportunity to leap-frog the entire conventional manufacturing supply chain, while radically reducing both the cost and the environmental impact of products for developing communities}, - keywords = {3D-Printing,Appropriate Technology,Distributed Manufacturing,Open Source Hardware,Photovoltaic,Solar Energy}, - file = {/Users/fabio/Zotero/storage/AALL6USN/King et al. - 2014 - Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities.pdf} -} - -@article{kingScienceMeaningLife2021, - title = {The {{Science}} of {{Meaning}} in {{Life}}}, - author = {King, Laura A. and Hicks, Joshua A.}, - year = {2021}, - month = jan, - journal = {Annual Review of Psychology}, - volume = {72}, - number = {1}, - pages = {561--584}, - publisher = {{Annual Reviews}}, - issn = {0066-4308}, - doi = {10.1146/annurev-psych-072420-122921}, - urldate = {2021-01-13}, - abstract = {Meaning in life has long been a mystery of human existence. In this review, we seek to demystify this construct. Focusing on the subjective experience of meaning in life, we review how it has been measured and briefly describe its correlates. Then we review evidence that meaning in life, for all its mystery, is a rather commonplace experience. We then define the construct and review its constituent facets: comprehension/coherence, purpose, and existential mattering/significance. We review the many experiences that have been shown to enhance meaning in life and close by considering important remaining research questions about this fascinating topic.}, - pmid = {32898466}, - keywords = {existential psychology,meaning in life,meaning making,positive affect,purpose,well-being} -} - -@article{kingShadesGreenGrowth2023, - title = {Shades of Green Growth Scepticism among Climate Policy Researchers}, - author = {King, Lewis C. and Savin, Ivan and Drews, Stefan}, - year = {2023}, - month = aug, - journal = {Nature Sustainability}, - pages = {1--5}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-023-01198-2}, - urldate = {2023-08-31}, - abstract = {Despite strong promotion of green growth by policymakers and international institutions, there is mounting criticism concerning the compatibility of continued economic growth with sustainability goals. Our global survey of 789 climate policy researchers reveals widespread scepticism in high-income countries, supporting the notion that as national income rises, environmental goals prevail over economic growth. This finding underscores the importance of considering alternative post-growth perspectives, including agrowth and degrowth strategies, to cultivate a more comprehensive discourse on sustainable development strategies.}, - copyright = {2023 The Author(s), under exclusive licence to Springer Nature Limited}, - langid = {english}, - keywords = {Climate-change mitigation,Climate-change policy,Environmental economics} -} - -@article{Kinoshita2016, - title = {Development of a {{Drilling Simulator}} for {{Dental Implant Surgery}}.}, - author = {Kinoshita, Hideaki and Nagahata, Masahiro and Takano, Naoki and Takemoto, Shinji and Matsunaga, Satoru and Abe, Shinichi and Yoshinari, Masao and Kawada, Eiji}, - year = {2016}, - journal = {Journal of dental education}, - volume = {80}, - number = {1}, - eprint = {26729688}, - eprinttype = {pubmed}, - pages = {83--90}, - issn = {1930-7837}, - abstract = {The aim of this study was to develop and evaluate a dental implant surgery simulator that allows learners to experience the drilling forces necessary to perform an osteotomy in the posterior mandibular bone. The simulator contains a force-sensing device that receives input and counteracts this force, which is felt as resistance by the user. The device consists of an actuator, a load cell, and a control unit. A mandibular bone model was fabricated in which the predicted forces necessary to drill the cortical and trabecular bone were determined via micro CT image-based 3D finite element analysis. The simulator was evaluated by five dentists from the Department of Implantology at Tokyo Dental College. The ability of the evaluators to distinguish the drilling resistance through different regions of the mandibular bone was investigated. Of the five dentists, four sensed the change in resistance when the drill perforated the upper cortical bone. All five dentists were able to detect when the drill made contact with lingual cortical bone and when the lingual bone was perforated. This project successfully developed a dental implant surgery simulator that allows users to experience the forces necessary to drill through types of bone encountered during osteotomy. Furthermore, the researchers were able to build a device by which excessive drilling simulates a situation in which the lingual cortical bone is perforated--a situation that could lead to negative repercussions in a clinical setting. The simulator was found to be useful to train users to recognize the differences in resistance when drilling through the mandibular bone.}, - pmid = {26729688}, - keywords = {computer simulation,dental education,dental implants,dental simulator,educational research,implant dentistry}, - file = {/Users/fabio/Zotero/storage/QFIFRY6N/Development of a Drilling Simulator for Dental Implant Surgery.pdf} -} - -@article{Kirchherr2017, - title = {Conceptualizing the Circular Economy: {{An}} Analysis of 114 Definitions}, - author = {Kirchherr, Julian and Reike, Denise and Hekkert, Marko}, - year = {2017}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {127}, - number = {September}, - eprint = {1011.1669v3}, - pages = {221--232}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2017.09.005}, - abstract = {The circular economy concept has gained momentum both among scholars and practitioners. However, critics claim that it means many different things to different people. This paper provides further evidence for these critics. The aim of this paper is to create transparency regarding the current understandings of the circular economy concept. For this purpose, we have gathered 114 circular economy definitions which were coded on 17 dimensions. Our findings indicate that the circular economy is most frequently depicted as a combination of reduce, reuse and recycle activities, whereas it is oftentimes not highlighted that CE necessitates a systemic shift. We further find that the definitions show few explicit linkages of the circular economy concept to sustainable development. The main aim of the circular economy is considered to be economic prosperity, followed by environmental quality; its impact on social equity and future generations is barely mentioned. Furthermore, neither business models nor consumers are frequently outlined as enablers of the circular economy. We critically discuss the various circular economy conceptualizations throughout this paper. Overall, we hope to contribute via this study towards the coherence of the circular economy concept; we presume that significantly varying circular economy definitions may eventually result in the collapse of the concept.}, - archiveprefix = {arxiv}, - isbn = {9780511620713}, - pmid = {25246403}, - keywords = {4R framework,Circular economy,Content analysis,Definitions,Sustainable development}, - file = {/Users/fabio/Zotero/storage/8MDQGTJL/Conceptualizing the circular economy- An analysis of 114 definitions.pdf} -} - -@article{Kirchherr2018, - ids = {kirchherr2018}, - title = {Barriers to the {{Circular Economy}}: {{Evidence From}} the {{European Union}} ({{EU}})}, - author = {Kirchherr, Julian and Piscicelli, Laura and Bour, Ruben and {Kostense-Smit}, Erica and Muller, Jennifer and {Huibrechtse-Truijens}, Anne and Hekkert, Marko}, - year = {2018}, - month = aug, - journal = {Ecological Economics}, - volume = {150}, - pages = {264--272}, - publisher = {{Elsevier B.V.}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2018.04.028}, - urldate = {2020-03-21}, - abstract = {The circular economy concept is much discussed in the European Union (EU), but only limited progress has been accomplished so far regarding its implementation. Most scholarly studies blame this on various technological barriers. Our work rebuts these studies. We present the first large-N-study on circular economy barriers in the EU (208 survey respondents, 47 expert interviews). We find that cultural barriers, particularly a lack of consumer interest and awareness as well as a hesitant company culture, are considered the main circular economy barriers by businesses and policy-makers. These are driven by market barriers which, in turn, are induced by a lack of synergistic governmental interventions to accelerate the transition towards a circular economy. Meanwhile, not a single technological barrier is ranked among the most pressing circular economy barriers, according to our research. Overall, our work suggests that circular economy is a niche discussion among sustainable development professionals at this stage. Significant efforts need to be undertaken for the concept to maintain its momentum.}, - keywords = {Barriers,Circular economy,European Union,Sustainability transitions,Sustainable development} -} - -@article{kirchherrCircularEconomyGrowth2021, - title = {Circular Economy and Growth: {{A}} Critical Review of ``Post-Growth'' Circularity and a Plea for a Circular Economy That Grows}, - author = {Kirchherr, Julian}, - year = {2021}, - month = nov, - journal = {Resources, Conservation and Recycling}, - pages = {106033}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106033}, - urldate = {2021-11-30} -} - -@article{kirchherrCircularJusticeProposition2021, - title = {Towards Circular Justice: {{A}} Proposition}, - author = {Kirchherr, Julian}, - year = {2021}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {173}, - pages = {105712}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105712}, - urldate = {2021-06-16}, - file = {/Users/fabio/Zotero/storage/RVBY3ASF/full-text.pdf} -} - -@article{kirchherrConceptualizingCircularEconomy2023, - title = {Conceptualizing the {{Circular Economy}} ({{Revisited}}): {{An Analysis}} of 221 {{Definitions}}}, - shorttitle = {Conceptualizing the {{Circular Economy}} ({{Revisited}})}, - author = {Kirchherr, Julian and Yang, Nan-Hua Nadja and {Schulze-Sp{\"u}ntrup}, Frederik and Heerink, Maarten J. and Hartley, Kris}, - year = {2023}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {194}, - pages = {107001}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107001}, - urldate = {2023-05-11}, - abstract = {In the past decade, use of the circular economy (CE) concept by scholars and practitioners has grown steadily. In a 2017 article, Kirchherr et~al. found that the CE concept is interpreted and implemented in a variety of ways. While multiple interpretations of CE can enrich scholarly perspectives, differentiation and fragmentation can also impede consolidation of the concept. Some scholarship has discussed these trends in context-specific cases, but no large-scale, systematic study has analysed whether such consolidation has taken place across the field. This article fills this gap by analysing 221 recent CE definitions, making several notable findings. First, the concept has seen both consolidation and differentiation in the past five years. Second, definitional trends are emerging that potentially have more meaning for scholarship than for practice. Third, scholars increasingly recommend a fundamental systemic shift to enable CE, particularly within supply chains. Fourth, sustainable development is frequently considered the principal aim of CE, but questions linger about whether CE can mutually support environmental sustainability and economic development. Finally, recent studies argue that CE transition relies on a broad alliance of stakeholders, including producers, consumers, policymakers, and scholars. This study contributes an updated systematic analysis of CE definitions and conceptualizations that serves as an empirical snapshot of current scholarly thinking. It thereby provides a basis for further research on whether conceptual consolidation is needed and how it can be facilitated for practical purposes.}, - langid = {english}, - keywords = {4R Framework,Circular economy,Content analysis,Definitions,Sustainable development,Systematic review}, - file = {/Users/fabio/Zotero/storage/JDBNQIEL/Kirchherr et al. - 2023 - Conceptualizing the Circular Economy (Revisited) .pdf;/Users/fabio/Zotero/storage/MX3UVUNM/S0921344923001374.html} -} - -@article{kirsop-taylorAgenciesNavigatingPolitical2022, - title = {Agencies Navigating the Political at the Science-to-Policy Interface for Nature-Based Solutions}, - author = {{Kirsop-Taylor}, Nick and Russel, Duncan}, - year = {2022}, - month = jan, - journal = {Environmental Science \& Policy}, - volume = {127}, - pages = {303--310}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.10.029}, - urldate = {2021-12-01} -} - -@article{kishFosteringCriticalPluralism2021, - ids = {kish2021}, - title = {Fostering Critical Pluralism with Systems Theory, Methods, and Heuristics}, - author = {Kish, K. and Mallery, D. and Yahya Haage, G. and {Melgar-Melgar}, R. and Burke, M. and Orr, C. and Smolyar, N. L. and Sanniti, S. and Larson, J.}, - year = {2021}, - month = nov, - journal = {Ecological Economics}, - volume = {189}, - pages = {107171}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2021.107171}, - urldate = {2022-09-26}, - abstract = {Ecological economics and systems theory have a long-standing history. As a foregrounding metatheoretical framework, systems thinking deepens socio-ecological acuity through comprehensive models of complex relationships between social and biophysical systems. However, critical and soft systems are often overlooked, necessitating a framework for ``critical pluralism,'' similar to that used by systems theorists themselves. To do this, we argue that ecological economics needs to include paradigm analysis as an integral part of the ecological economic discourse to situate work within sociological paradigms \textendash{} not just biophysical limits to growth. To help establish a critical pluralism approach, we trained a group of emerging ecological economics scholars to integrate systems thinking more firmly in research approaches. We integrate soft systems methodology and critical systems heuristics to establish foundations for critical soft systems methodology. We then trained emerging scholars on this new methodology. Emergent from the results of this training is a new paradigm of thought, centred on regenerative features, for the future of ecological economics \textendash{} which is best navigated with critical pluralistic approaches. The results of this training also present lessons for the discipline of ecological economics that help chart out the discipline's tensions.}, - langid = {english}, - keywords = {Critical systems heuristics,Ecological economics,Participatory action research,Sociological paradigms,Soft systems methodology}, - file = {/Users/fabio/Zotero/storage/58U9K7TT/Kish et al_2021_Fostering critical pluralism with systems theory, methods, and heuristics.pdf;/Users/fabio/Zotero/storage/WB3JCASB/S0921800921002299.html} -} - -@article{kishitaScenarioStructuringMethodology2020, - title = {Scenario Structuring Methodology for Computer-Aided Scenario Design: {{An}} Application to Envisioning Sustainable Futures}, - author = {Kishita, Yusuke and Mizuno, Yuji and Fukushige, Shinichi and Umeda, Yasushi}, - year = {2020}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {160}, - pages = {120207}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120207}, - urldate = {2020-08-13}, - abstract = {A number of thematic scenarios have been developed for envisioning sustainable futures in order to support strategic decision-making for government and industry. However, methodologies for designing scenarios have generally been under-theorized. For a better understanding and communication among stakeholders involved, this paper aims to propose the concept of computer-aided scenario design whose key characteristic is to provide a graphical representation of scenarios. That is, the paper proposes a method for representing the logical structure of a scenario by drawing the idea of graph theory. Based on this representation method, the paper dynamically connects a scenario with its associated simulators for undertaking what-if analysis in a quantitative manner. In an illustrative case study, the proposed method is applied to an extant scenario for hybrid electric vehicle diffusion. The results show that the method clarified the logical structure of the scenario and the rationales for deriving the scenario's conclusions. It was also demonstrated that the method enabled to create scenario variants when the original assumptions were changed. The proposed method would facilitate the iterative process of scenario design, thereby encouraging scientific dialog between researchers and stakeholders.}, - keywords = {Computer-aided design,Logical structure,Participatory approach,Scenario design,Sustainability,What-if analysis} -} - -@inproceedings{Kitchenham2007, - title = {Performing Systematic Literature Reviews in Software Engineering}, - booktitle = {Proceeding of the 28th International Conference on {{Software}} Engineering - {{ICSE}} '06}, - author = {Budgen, David and Brereton, Pearl}, - year = {2006}, - volume = {45}, - pages = {1051}, - publisher = {{ACM Press}}, - address = {{New York, New York, USA}}, - issn = {00010782}, - doi = {10.1145/1134285.1134500}, - abstract = {The objective of this report is to propose comprehensive guidelines for systematic literature reviews appropriate for software engineering researchers, including PhD students. A systematic literature review is a means of evaluating and interpreting all available research relevant to a particular research question, topic area, or phenomenon of interest. Systematic reviews aim to present a fair evaluation of a research topic by using a trustworthy, rigorous, and auditable methodology. The guidelines presented in this report were derived from three existing guidelines used by medical researchers, two books produced by researchers with social science backgrounds and discussions with researchers from other disciplines who are involved in evidence-based practice. The guidelines have been adapted to reflect the specific problems of software engineering research. The guidelines cover three phases of a systematic literature review: planning the review, conducting the review and reporting the review. They provide a relatively high level description. They do not consider the impact of the research questions on the review procedures, nor do they specify in detail the mechanisms needed to perform meta-analysis.}, - isbn = {1-59593-375-1}, - file = {/Users/fabio/Zotero/storage/DN6W5SDF/m-api-5ebf29b3-b27d-8e1e-6fe0-6314680c0f2f.pdf} -} - -@article{Kitchenham2009, - title = {Systematic Literature Reviews in Software Engineering - {{A}} Systematic Literature Review}, - author = {Kitchenham, Barbara and Pearl Brereton, O. and Budgen, David and Turner, Mark and Bailey, John and Linkman, Stephen}, - year = {2009}, - journal = {Information and Software Technology}, - volume = {51}, - number = {1}, - pages = {7--15}, - publisher = {{Elsevier B.V.}}, - issn = {09505849}, - doi = {10.1016/j.infsof.2008.09.009}, - abstract = {Background: In 2004 the concept of evidence-based software engineering (EBSE) was introduced at the ICSE04 conference. Aims: This study assesses the impact of systematic literature reviews (SLRs) which are the recommended EBSE method for aggregating evidence. Method: We used the standard systematic literature review method employing a manual search of 10 journals and 4 conference proceedings. Results: Of 20 relevant studies, eight addressed research trends rather than technique evaluation. Seven SLRs addressed cost estimation. The quality of SLRs was fair with only three scoring less than 2 out of 4. Conclusions: Currently, the topic areas covered by SLRs are limited. European researchers, particularly those at the Simula Laboratory appear to be the leading exponents of systematic literature reviews. The series of cost estimation SLRs demonstrate the potential value of EBSE for synthesising evidence and making it available to practitioners. \textcopyright{} 2008 Elsevier B.V. All rights reserved.}, - isbn = {0950-5849}, - keywords = {Cost estimation,Evidence-based software engineering,Systematic literature review,Systematic review quality,Tertiary study}, - file = {/Users/fabio/Zotero/storage/9YISJPVE/Systematic literature reviews in software engineering - A systematic literature review.pdf} -} - -@article{Kitchenham2010, - title = {Systematic Literature Reviews in Software Engineering-{{A}} Tertiary Study}, - author = {Kitchenham, Barbara and Pretorius, Rialette and Budgen, David and Brereton, O. Pearl and Turner, Mark and Niazi, Mahmood and Linkman, Stephen}, - year = {2010}, - journal = {Information and Software Technology}, - volume = {52}, - number = {8}, - pages = {792--805}, - publisher = {{Elsevier B.V.}}, - issn = {09505849}, - doi = {10.1016/j.infsof.2010.03.006}, - abstract = {Context: In a previous study, we reported on a systematic literature review (SLR), based on a manual search of 13 journals and conferences undertaken in the period 1st January 2004 to 30th June 2007. Objective: The aim of this on-going research is to provide an annotated catalogue of SLRs available to software engineering researchers and practitioners. This study updates our previous study using a broad automated search. Method: We performed a broad automated search to find SLRs published in the time period 1st January 2004 to 30th June 2008. We contrast the number, quality and source of these SLRs with SLRs found in the original study. Results: Our broad search found an additional 35 SLRs corresponding to 33 unique studies. Of these papers, 17 appeared relevant to the undergraduate educational curriculum and 12 appeared of possible interest to practitioners. The number of SLRs being published is increasing. The quality of papers in conferences and workshops has improved as more researchers use SLR guidelines. Conclusion: SLRs appear to have gone past the stage of being used solely by innovators but cannot yet be considered a main stream software engineering research methodology. They are addressing a wide range of topics but still have limitations, such as often failing to assess primary study quality. ?? 2010 Elsevier B.V. All rights reserved.}, - isbn = {0950-5849}, - keywords = {Mapping study,Software engineering,Systematic literature review,Tertiary study}, - file = {/Users/fabio/Zotero/storage/LHK2BBL2/Systematic literature reviews in software engineering-A tertiary study.pdf} -} - -@article{Kitson2012, - title = {Configurable {{3D-Printed}} Millifluidic and Microfluidic `Lab on a Chip' Reactionware Devices}, - author = {Kitson, Philip J. and Rosnes, Mali H. and Sans, Victor and Dragone, Vincenza and Cronin, Leroy}, - year = {2012}, - journal = {Lab on a Chip}, - volume = {12}, - number = {18}, - pages = {3267}, - issn = {1473-0197}, - doi = {10.1039/c2lc40761b}, - abstract = {We utilise 3D design and 3D printing techniques to fabricate a number of miniaturised fluidic 'reactionware' devices for chemical syntheses in just a few hours, using inexpensive materials producing reliable and robust reactors. Both two and three inlet reactors could be assembled, as well as one-inlet devices with reactant 'silos' allowing the introduction of reactants during the fabrication process of the device. To demonstrate the utility and versatility of these devices organic (reductive amination and alkylation reactions), inorganic (large polyoxometalate synthesis) and materials (gold nanoparticle synthesis) processes were efficiently carried out in the printed devices.}, - isbn = {1473-0197}, - pmid = {22875258}, - file = {/Users/fabio/Zotero/storage/USDVJYX8/Lab on a Chip (2012).pdf} -} - -@article{kivimaaTypologyIntermediariesSustainability2019, - title = {Towards a Typology of Intermediaries in Sustainability Transitions: {{A}} Systematic Review and a Research Agenda}, - author = {Kivimaa, Paula and Boon, Wouter and Hyysalo, Sampsa and Klerkx, Laurens}, - year = {2019}, - month = may, - journal = {Research Policy}, - volume = {48}, - number = {4}, - pages = {1062--1075}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2018.10.006}, - urldate = {2022-03-13}, - abstract = {Intermediary actors have been proposed as key catalysts that speed up change towards more sustainable socio-technical systems. Research on this topic has gradually gained traction since 2009, but has been complicated by the inconsistency regarding what intermediaries are in the context of such transitions and which activities they focus on, or should focus on. We briefly elaborate on the conceptual foundations of the studies of intermediaries in transitions, and how intermediaries have been connected to different transition theories. This shows the divergence \textendash{} and sometimes a lack \textendash{} of conceptual foundations in this research. In terms of transitions theories, many studies connect to the multi-level perspective and strategic niche management, while intermediaries in technological innovation systems and transition management have been much less explored. We aim to bring more clarity to the topic of intermediaries in transitions by providing a definition of transition intermediaries and a typology of five intermediary types that is sensitive to the emergence, neutrality and goals of intermediary actors as well as their context and level of action. Some intermediaries are specifically set up to facilitate transitions, while others grow into the role during the process of socio-technical change. Based on the study, as an important consideration for future innovation governance, we argue that systemic and niche intermediaries are the most crucial forms of intermediary actors in transitions, but they need to be complemented by a full ecology of intermediaries, including regime-based transition intermediaries, process intermediaries and user intermediaries.}, - keywords = {Innovation intermediaries,Intermediation,Sustainability transitions}, - file = {/Users/fabio/Zotero/storage/7ALWCWVJ/full-text.pdf} -} - -@article{Klarin2019, - title = {Mapping Product and Service Innovation: {{A}} Bibliometric Analysis and a Typology}, - author = {Klarin, Anton}, - year = {2019}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {149}, - pages = {119776}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119776} -} - -@article{klebaFosteringPeaceEngineering2021, - title = {Fostering Peace Engineering and Rethinking Development: {{A Latin American}} View}, - author = {Kleba, John Bernhard and {Reina-Rozo}, Juan David}, - year = {2021}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {167}, - pages = {120711}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120711}, - urldate = {2021-03-08} -} - -@article{Kleer2019, - title = {Local Manufacturing and Structural Shifts in Competition: {{Market}} Dynamics of Additive Manufacturing}, - author = {Kleer, Robin and Piller, Frank T.}, - year = {2019}, - month = oct, - journal = {International Journal of Production Economics}, - volume = {216}, - pages = {23--34}, - publisher = {{Elsevier B.V.}}, - issn = {09255273}, - doi = {10.1016/j.ijpe.2019.04.019}, - urldate = {2021-03-07}, - abstract = {Additive manufacturing (AM) allows to build components and finished series products directly from 3D data, without the need for tooling or other setup cost. An often discussed, but hardly investigated opportunity of AM is to establish economical and scalable local production facilities for innovating consumers (who turn into ``prosumers''). In this paper, we investigate the effect of such a local production (enabled by AM) on consumer welfare, market structure, and competitive dynamics. Doing so, we provide a new perspective on the fundamental trade-off between the instant availability of (perfectly fitting) products manufactured by and in close proximity to a consumer and the efficiency gains of realizing economies of scale by producing standard products in a central facility. We analyze AM from the perspective of the established theories of user innovation and spatial competition. Building on two game-theoretical (Hotelling) models, we show that there is scope for the improvement of consumer welfare arising from local production by consumer producers. Our analysis allows us to make a number of propositions concerning the effects of AM on market structure when adopted by local users, and to identify the specific conditions of these shifts.}, - keywords = {3D printing,Additive manufacturing,Localization of manufacturing,Market structure,Prosumer,User innovation}, - file = {/Users/fabio/Zotero/storage/EBCR7U8Q/full-text.pdf} -} - -@article{Klein2013, - title = {Glass: {{An}} Old Material for the Future of Manufacturing}, - author = {Klein, S and Dickin, F and Adams, G and Simske, S}, - year = {2013}, - journal = {2012 MRS Fall Meeting}, - volume = {1492}, - pages = {73--77}, - issn = {02729172}, - doi = {10.1557/opl.2013.151}, - abstract = {Traditional assembly line manufacturing is speculative, costly and environmentally unsustainable. It is speculative because it commits substantial resources - energy, materials, shipping, handling, stocking and displaying - without a guaranteed sale. It is costly because each of these resources - material, process, people and place - involves expense not encountered when a product is manufactured at the time of sale. It is environmentally unsustainable because, no matter how much recycling is done, not using the resources unless actually needed is always a better path. Three-dimensional printing is currently of great commercial interest as it can be employed to manufacture parts on-demand economically and without the significant cost \& environmental downsides, i.e. inventory and waste, associated with traditional manufacturing processes. Herein, we describe the formulation of a novel water-based material which can be used in a traditional 3D printer extrusion process to create optically transparent glass-based objects. Such objects have a wide range of applications including, but not wholly limited to: security printing using color \& coating effects, protective films and coatings, electronic codes readable by smartphones, tablets or touch screens. Additional all glass objects traditionally manufactured by the so called kiln glass method can be generated by this type of 3D printing making it interesting for the high end market of art objects. \textcopyright{} 2013 Materials Research Society.}, - isbn = {02729172 (ISSN); 9781605114699 (ISBN)}, - keywords = {3D printers,Assembly line,Coatings,Electronic codes,Extrusion process,Films and coatings,Glass,Manufacture,Manufacturing IS,Materials handling,Printing,Security printing,Three-dimensional printing,Traditional manufacturing}, - file = {/Users/fabio/Zotero/storage/AU7FY8RA/Klein et al. - 2013 - Glass An old material for the future of manufacturing.pdf} -} - -@article{kleinValuebasedBricolageResource, - title = {Value-Based Bricolage: {{Resource}} Mobilization in the Circular Economy}, - shorttitle = {Value-Based Bricolage}, - author = {Klein, Sascha P. and {Liszt-Rohlf}, Verena and Spieth, Patrick}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13431}, - urldate = {2023-08-31}, - abstract = {Circular-born firms face resource constraints first, as they emphasize the use and reuse of materials as an opposite to the linear production system of taking, making, and disposing of resources, and second, due to systemic challenges like lack of scale and information on resources. Given these challenges, entrepreneurs need to find novel solutions for resource mobilization in the circular economy (CE). This study aims to identify how entrepreneurs mobilize resources to accomplish these challenges. With qualitative, multiple-case study research in circular-born firms developing a CE business model (CEBM), we identify four patterns of resource mobilization serving different purposes in the development of a CEBM. While three patterns\textemdash resource seeking, material bricolage, and ideational bricolage\textemdash are established concepts in entrepreneurship, we identify and conceptualize a fourth unique pattern in the CE: value-based bricolage. By conceptualizing the activity domains of value-based bricolage and examining the motivation and outcomes of each pattern in designing CEBMs, we provide new insights into how solutions to challenges concerning the use of resources in the CE enable circularity.}, - copyright = {\textcopyright{} 2023 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of International Society for Industrial Ecology.}, - langid = {english}, - keywords = {bricolage,circular economy,circular economy business model,multiple-case study,resource mobilization,value-based bricolage}, - file = {/Users/fabio/Zotero/storage/XBT6EWX7/Klein et al_Value-based bricolage.pdf;/Users/fabio/Zotero/storage/XD5KZTQ7/jiec.html} -} - -@article{klinenbergSociologyClimateCrisis2020, - title = {Sociology and the {{Climate Crisis}}}, - author = {Klinenberg, Eric and Araos, Malcolm and Koslov, Liz}, - year = {2020}, - month = jul, - journal = {Annual Review of Sociology}, - volume = {46}, - number = {1}, - pages = {649--669}, - publisher = {{Annual Reviews}}, - issn = {0360-0572}, - doi = {10.1146/annurev-soc-121919-054750}, - urldate = {2020-08-09}, - abstract = {{$<$}p{$>$}What would it mean for sociology to make climate change a core disciplinary concern? This article reviews research on a selection of trends brought on by the climate crisis: ( a) compounding and cumulative disasters, infrastructure breakdown, and adaptation; ( b) intensifying migration and shifting patterns of settlement; and ( c) transformations in consumption, labor, and energy. While climate change's far-reaching implications remain peripheral to the discipline at large, sociologists studying these trends increasingly understand the crisis as a central problem for the study of social life. We show how sociologists can shed light on core problems emerging from and contributing to the crisis, and also reveal the conditions that make necessary social and cultural transformations more likely. Throughout, we illuminate how sociology can help chart a path out of the climate crisis by identifying alternatives to the high-carbon, low-equity social structures that organize the modern world. Finally, we identify possibilities for scholars who do not see themselves as ``environmental sociologists'' to contribute meaningful research on the climate crisis, and we encourage them to do so while we can make a difference.{$<$}/p{$>$}}, - keywords = {adaptation,climate change,community,consumption,disasters,infrastructure,migration,urban} -} - -@article{klitgaard2012, - title = {Ecological Economics, Degrowth, and Institutional Change}, - author = {Klitgaard, Kent A. and Krall, Lisi}, - year = {2012}, - month = dec, - journal = {Ecological Economics}, - series = {The {{Economics}} of {{Degrowth}}}, - volume = {84}, - pages = {247--253}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2011.11.008}, - urldate = {2022-08-05}, - abstract = {Ecological economics has made great strides in the understanding of how the human economy is embedded in a finite and limited biophysical system. However less progress has been made in understanding the internal dynamics of the economy that produce periods of slow growth, even in the absence of biophysical constraints. The real economy is a complex system, replete with myriad positive feedback loops. By looking at the economy from a systems perspective ecological economists can better understand the internal dynamics of a market system that lead to the periodic depressions and recessions that characterize ``the failed growth economy.'' A non-growing or declining economy exacerbates formidable economic problems such as unemployment, debt, and poverty. Since the middle of the 20th century governments have pursued growth strategies to solve social problems. But the age of economic growth is coming to an end, driven by its own internal dynamics and by biophysical forces such as climate change and peak oil. Degrowth implies less, and the steady state implies less on a permanent basis. Ecological economists need to pay more attention to the implications of less for a market economy and the effects upon people under our present economic configuration.}, - langid = {english}, - keywords = {Degrowth,Ecological economics,Economic surplus,Evolutionary economics,Political economy}, - file = {/Users/fabio/Zotero/storage/PNEACNIR/Klitgaard_Krall_2012_Ecological economics, degrowth, and institutional change.pdf;/Users/fabio/Zotero/storage/UBANYLWM/S0921800911004897.html} -} - -@article{klitkouInterconnectedDynamicsSocial2022, - title = {The Interconnected Dynamics of Social Practices and Their Implications for Transformative Change: {{A}} Review}, - author = {Klitkou, Antje and Bolwig, Simon and Huber, Andreas and Ingeborgrud, Lina and Pluci{\'n}ski, Przemys{\l}aw and Rohracher, Harald and Schartinger, Doris and Thiene, Mara and {\.Z}uk, Piotr}, - year = {2022}, - month = may, - journal = {Sustainable Production and Consumption}, - volume = {31}, - pages = {603--614}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.03.027}, - urldate = {2022-04-11} -} - -@article{Klockner2011a, - title = {General vs. Domain Specific Recycling Behaviour\textemdash{{Applying}} a Multilevel Comprehensive Action Determination Model to Recycling in {{Norwegian}} Student Homes}, - author = {Kl{\"o}ckner, Christian Andreas and Oppedal, Inger Olin}, - year = {2011}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {55}, - number = {4}, - pages = {463--471}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2010.12.009}, - abstract = {This paper reports the results of a multilevel structure equation model predicting general and fraction specific self-reported recycling behaviour. The model was tested on a sample of 697 undergraduate students from four Norwegian universities who each reported their degree of participation in the local recycling schemes for paper/cardboard, glass, metal, and plastic. It was demonstrated that variance in recycling behaviour can be divided into a smaller general part that is relatively stable across waste fractions and a specific part that depends on the respective fraction. General recycling behaviour is well predicted by intentions to recycle and recycling habits, whereas perceived behavioural control is to a large extend fraction specific and influences the fraction specific recycling. Perceived behavioural control mediates the influence of the recycling scheme type, distance to recycling containers, and transport mode used to reach the recycling containers. \textcopyright{} 2010 Elsevier B.V.}, - isbn = {0921-3449}, - keywords = {Glass,Intention,Metal,Multi-level analysis,Paper,Perceived behavioural control,Plastic,Psychology,Recycling}, - file = {/Users/fabio/Zotero/storage/TYRBXTWI/General vs. domain specific recycling behaviour - Applying a multilevel comprehensive action determination model to recycling in Norwegi.pdf} -} - -@article{Klooker2018, - title = {Making {{Use}} of {{Innovation Spaces}}: {{Towards}} a {{Framework}} of {{Strategizing Spatial Interventions}}}, - author = {Klooker, Marie and Schwemmle, Martin and Nicolai, Claudia and Weinberg, Ulrich}, - year = {2018}, - pages = {75--96}, - doi = {10.1007/978-3-319-97082-0_5}, - abstract = {This chapter explores the use of space as a means of effectively fostering creativity and innovation in organizations more specifically, so-called spatial inter- ventions. Spatial interventions refer to the strategic scope of actions that can be undertaken when and while using innovation spaces. We approach the topic of spatial interventions from different perspectives and shed light on crucial aspects of how innovation spaces can be used as a `silent coach.' This approach takes into consid- eration the conceptual interplay of the strategic discourse, theoretical accounts of coaching practice and the process of using innovation spaces. We further introduce a framework for spatial interventions that helps to structure and analyze the use of space during a workshop. Finally, based on findings from a case study that was conducted in the newly created innovation space of a large company, we apply and expand this theoretical framework. The approaches and findings of this chapter support both strategists and practitioners and contribute to a deeper understanding of how to make use of space as a strategic tool.}, - isbn = {9783319970820}, - file = {/Users/fabio/Zotero/storage/C3FME9NJ/Making Use of Innovation Spaces- Towards a Framework of Strategizing Spatial Interventions.pdf} -} - -@article{klotzLimitedUtilizationOptions2022, - title = {Limited Utilization Options for Secondary Plastics May Restrict Their Circularity}, - author = {Klotz, Magdalena and Haupt, Melanie and Hellweg, Stefanie}, - year = {2022}, - month = mar, - journal = {Waste Management}, - volume = {141}, - pages = {251--270}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.01.002}, - urldate = {2022-03-07}, - abstract = {Plastic recycling can provide environmental benefits by avoiding the detrimental impacts of alternative disposal pathways and enabling the substitution of primary materials. However, most studies aiming at increasing recycling rates have not investigated how the resulting secondary materials can be utilized in product manufacturing. This study assesses the future substitution potential of primary with secondary plastics, building on a material flow system of 11 plastic types in 54 product subsegments in Switzerland in 2017 with a recycling rate of 9\%. In a prospective material flow analysis of a scenario for 2025, the collection rate of the plastic fractions collected in 2017 is increased to 80\%. The secondary material flows are allocated to suitable uptaking product subsegments using a linear optimization. The maximum share of secondary materials utilizable in each product subsegment is estimated, whereby three sub-scenarios involving high, moderate and low allowed secondary material shares are modelled. Depending on plastic type and scenario, 21\% to 100\% of the secondary material gained can substitute for primary material, covering 11\% to 17\% of the total material demand. While the overall recycling rate could reach 23\%, taking into account only the uptaken secondary materials a true recycling rate of only 17\% results in the moderate applicability sub-scenario. Based on these results, the secondary material uptake can be said to constitute a limiting factor for increased future recycling. Therefore, thorough consideration of the possible secondary material application is a prerequisite for designing and assessing future recycling systems or for setting recycling rate targets.}, - pmid = {35158311}, - keywords = {Material flow analysis,Plastics,Recycling barriers,Recycling rate,Secondary material utilization}, - file = {/Users/fabio/Zotero/storage/9PKUUG73/full-text.pdf} -} - -@article{klotzPotentialsLimitsMechanical2023, - title = {Potentials and Limits of Mechanical Plastic Recycling}, - author = {Klotz, Magdalena and Haupt, Melanie and Hellweg, Stefanie}, - year = {2023}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13393}, - urldate = {2023-05-11}, - abstract = {Plastics consumption continues to steeply increase worldwide, while resultant waste is currently mostly landfilled, discarded to the environment, or incinerated. This significantly contributes to global warming and causes negative health and ecosystem effects. Increasing the circularity of plastics can reduce these impacts. This study investigated to which extent plastics' circularity can be increased by mechanical recycling. For this purpose, future scenarios involving increased waste collection, improved product design, and improved waste sorting were assessed. The system studied consists of 11 plastic types in 69 product groups consumed and arising as waste in Switzerland. By means of a material flow analysis, the amounts of consumption, waste, and secondary material utilizable in product manufacturing were quantified for the year 2040. For the waste not mechanically recycled, treatment situations mainly involving energy recovery in waste-to-energy plants and cement kilns were modeled. A life cycle assessment of the complete plastic material flow system was conducted. We found that the mechanical recycling rate calculated based on the utilizable secondary material can be increased to up to 31\%. This can lower the plastic carbon footprint by one quarter (1.3\% of today's total Swiss carbon footprint) compared to no recycling. Important barriers to a further increase of the recycling rate were inaccessibility, the large diversity of plastic grades, and contamination. The remaining impact at maximum recycling is mainly caused by polyurethanes, polypropylene, and polystyrene production. In conclusion, the potential of mechanical plastic recycling is limited, but it can, as one of several measures, contribute to combating climate change.}, - copyright = {\textcopyright{} 2023 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of International Society for Industrial Ecology.}, - langid = {english}, - keywords = {environmental assessment,industrial ecology,life cycle assessment,material flow analysis,plastic recycling,resource management}, - file = {/Users/fabio/Zotero/storage/78RZFJG5/Klotz et al. - Potentials and limits of mechanical plastic recycl.pdf;/Users/fabio/Zotero/storage/7GXCYVC9/jiec.html} -} - -@article{Knoll2013, - title = {Creating {{Collaborative Spaces}} That {{Work}}: {{A Performance-based Approach}} to {{Successful Planning}}}, - author = {Knoll, {\relax Inc}.}, - year = {2013}, - pages = {1--10} -} - -@article{Knussen2004a, - title = {An Analysis of Intentions to Recycle Household Waste: {{The}} Roles of Past Behaviour, Perceived Habit, and Perceived Lack of Facilities}, - author = {Knussen, Christina and Yule, Fred and MacKenzie, Julie and Wells, Mark}, - year = {2004}, - month = jun, - journal = {Journal of Environmental Psychology}, - volume = {24}, - number = {2}, - pages = {237--246}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2003.12.001}, - abstract = {The theory of planned behaviour (TPB) was used to guide an analysis of intentions to recycle household waste in a geographical area (Glasgow, Scotland) with relatively poor recycling facilities. A sample of 252 members of the public completed a questionnaire (response rate of 66\%). In addition to TPB variables, the contributions of past recycling behaviour, perceived habit of recycling, and perceived lack of recycling facilities were considered. The TPB components contributed 29\% to the variance of intentions to recycle; attitudes and perceived behavioural control (PBC) (but not the subjective norm) were significant on entry. Past recycling and perceived habit made significant independent contributions. Contrary to expectations, there was some evidence to suggest that (a) the past behaviour-intention relationship was stronger for those with no perceived habit of recycling, and (b) the attitude-intention relationship was stronger for those who had recycled more in the past. There was also evidence to suggest that the PBC-intention relationship was weaker when facilities were perceived to be lacking. The findings highlighted methodological, theoretical, and social issues, and it was concluded that full account should be taken of the social context in such research. \textcopyright{} 2004 Elsevier Ltd. All rights reserved.}, - isbn = {0272-4944}, - file = {/Users/fabio/Zotero/storage/HCB49DR2/An analysis of intentions to recycle household waste The roles of past behaviour, perceived habit, and perceived lack of facilities.pdf} -} - -@article{Ko2016, - title = {{{HCI International}} 2016 \textendash{} {{Posters}}' {{Extended Abstracts}}}, - author = {Ko, Minjae and Kang, Heemoon and Kim, Jong and Lee, Yonghyeon}, - year = {2016}, - volume = {617}, - pages = {116--121}, - doi = {10.1007/978-3-319-40548-3}, - abstract = {The cooperation and collaboration between humans and robots is getting ever closer: While the human body was historically protected by a large safety distance, more and more organizations let robots and humans work handin-hand. This means that humans and robots are sharing physical space and are engaging in direct contact with each other. One factor that predicts successful human-robot interaction is the acceptance of the robot by the human. In general, only when a product covers human needs and expectations, it is perceived to be useful and hence accepted. This paper aims at presenting an acceptance model with regard to the cooperation between humans and robots that is based on prior acceptance models while also taking ethical, legal and social implications (ELSI) into account.}, - isbn = {978-3-319-40547-6}, - keywords = {affordable 3d printing \'a,measurement,quality index \'a quantitative}, - file = {/Users/fabio/Zotero/storage/VI279I3B/How to Measure Quality of Affordable 3D Printing- Cultivating Quantitative Index in the User Community.pdf} -} - -@article{Koellner2014a, - title = {Measurement and Analysis System for Bicycle Field Test Studies}, - author = {Koellner, Anton and Cameron, Christopher J and Battley, Mark A}, - year = {2014}, - journal = {Procedia Engineering}, - volume = {72}, - number = {0}, - pages = {350--355}, - publisher = {{Elsevier B.V.}}, - issn = {18777058}, - doi = {10.1016/j.proeng.2014.06.061}, - abstract = {The work presented describes the development of a measurement and analysis system for bicycle field test studies capable of measuring structural responses including strain and acceleration. The system incorporates 24 sensors measuring strain, 4 sensors measuring acceleration, a stand-alone data acquisition unit weighing 1.7kg which can be mounted behind the seat post and an offline programme analysing the data obtained. The system has been fully implemented on a BMX bicycle for the work presented herein. Piezo-electric accelerometers and resistance strain gauges are used as sensors which are wired to the data acquisition (DAQ) unit. The DAQ unit consists of a controller-chassis, 4 signal conditioning modules and specific application software. The software which controls the measurement process performs sensor calibration, simultaneous 24 bit data acquisition with a sampling frequency of 1000Hz, signal conditioning and data storage. The sampling frequency was established as optimal in specifically designed assessment tests. The data is post-processed to determine the frequency responses, maximum accelerations and strains and to illustrate the time behaviour of accelerations and strains. The measurement and analysis system is validated in common cycling scenarios and a race simulation on a race track. The system is applicable to different types of bicycles and enables comprehensive investigations of structural phenomena. ?? 2014 Published by Elsevier Ltd.}, - isbn = {1877-7058}, - keywords = {Bicycles,Data acquisition,Field test studies,Stand-alone measurement system} -} - -@article{kohlerAgendaSustainabilityTransitions2019, - title = {An Agenda for Sustainability Transitions Research: {{State}} of the Art and Future Directions}, - shorttitle = {An Agenda for Sustainability Transitions Research}, - author = {K{\"o}hler, Jonathan and Geels, Frank W. and Kern, Florian and Markard, Jochen and Onsongo, Elsie and Wieczorek, Anna and Alkemade, Floortje and Avelino, Flor and Bergek, Anna and Boons, Frank and F{\"u}nfschilling, Lea and Hess, David and Holtz, Georg and Hyysalo, Sampsa and Jenkins, Kirsten and Kivimaa, Paula and Martiskainen, Mari and McMeekin, Andrew and M{\"u}hlemeier, Marie Susan and Nykvist, Bjorn and Pel, Bonno and Raven, Rob and Rohracher, Harald and Sand{\'e}n, Bj{\"o}rn and Schot, Johan and Sovacool, Benjamin and Turnheim, Bruno and Welch, Dan and Wells, Peter}, - year = {2019}, - month = jun, - journal = {Environmental Innovation and Societal Transitions}, - volume = {31}, - pages = {1--32}, - issn = {22104224}, - doi = {10.1016/j.eist.2019.01.004}, - urldate = {2022-08-25}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/CTGFIW69/Köhler et al. - 2019 - An agenda for sustainability transitions research.pdf} -} - -@article{Kohtala2015, - title = {Anticipated Environmental Sustainability of Personal Fabrication}, - author = {Kohtala, Cindy and Hyysalo, Sampsa}, - year = {2015}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {99}, - pages = {333--344}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2015.02.093}, - file = {/Users/fabio/Zotero/storage/7V5DQWDB/Kohtala, Hyysalo - 2015 - Anticipated environmental sustainability of personal fabrication.pdf} -} - -@article{Kohtala2015a, - title = {Addressing Sustainability in Research on Distributed Production: An Integrated Literature Review}, - author = {Kohtala, Cindy}, - year = {2015}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {106}, - pages = {654--668}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2014.09.039}, - abstract = {This paper presents an integrated literature review on how the environmental sustainability of distributed production is studied in a variety of disciplinary sources. The notion of distributed production suggests an alternative to mass production that differs in scale, location and consumer-producer relationship. Understanding its environmental implications (and thereby dematerialization potential) is regarded pertinent and timely. Key themes in the review included how distributed production can promote product longevity and closed material loops, as well as localizing production. New and closer ties between producer and consumer seemed central discussions but were underdeveloped with regard to sustainability potential. Empirical work was seen especially in research on Additive Manufacturing Processes, while the bulk of the studies were conceptual explorations with little testing in the real world as yet. This affirms the emerging nature of the topic and points to a clear need for more (and more diverse) empirical research. The review summarizes the opportunities for greater environmental sustainability as well as potential threats that could serve to guide and improve these novel practices today. It sets the stage for 'distributed production' to be examined as its own phenomenon by proposing how it can be characterized and suggests that a research agenda could build upon the work initiated here.}, - isbn = {0959-6526}, - keywords = {Distributed production,Environmental sustainability,Fab labs,Literature review,Mass customization}, - file = {/Users/fabio/Zotero/storage/43LVRB3L/Addressing sustainability in research on distributed production- an integrated literature review (2015).pdf} -} - -@book{Kohtala2016, - title = {{{MAKING SUSTAINABILITY How Fab Labs Address Environmental Issues}}}, - author = {Kohtala, Cindy}, - year = {2016}, - journal = {Doctoral Dissertation}, - volume = {29}, - issn = {1799-4942}, - abstract = {Digital manufacturing technologies are proliferating and can enable socially significant, innovative new forms of production and consumption. This thesis examines the environmental sustainability issues in peer production and how they are addressed in Fab Labs (fabrication laboratories): shared spaces where users can design and make their own artefacts outside of conventional mass production channels, using, for example, laser cutters, 3D printers and electronics stations. Fab Labs are open to members of the general public, who learn to use the equipment themselves and are encouraged (or required) to document and openly share their projects. `Making' in Fab Labs and the `maker movement' are often endorsed by proponents as a better alternative to mass consumption and consumerism, whether through enhancing skills to build and repair, answering one's own needs as opposed to `satisficing' through passive consumption, or distributing production within local networks as opposed to long, transport-intensive and large-volume supply chains. However, Fab Labs and makerspaces are contexts rife with paradox and complexity concerning appropriate use of materials and energy. Little empirical research on material peer production currently exists, and the environmental impacts, and benefits, of digital fabrication are largely unknown. Primarily through ethnographic research methods and Symbolic Interactionist analysis, the thesis examines daily practices and discourses in selected Fab Labs and how sustainability is represented in these communities. The findings articulate how the actors' interactions, expressed intents and contextual conditions serve to shape the Fab Lab. The key finding is the conflict actors encounter between \textendash{} on the one hand \textendash{} setting ambitions, promoting particular ideologies and espousing sustainability-oriented values, and \textendash{} on the other hand \textendash{} realizing and enacting these values in the mundane and constraining routines of everyday practice. Even actors with a clear ecological mandate struggle to engage with emerging sustainability issues in a rapidly changing sociotechnical environment. Present topics of concern and everyday tasks overshadow future strategy and vision work as well as engagement with environmental issues and rapid technology developments. However, actors who consciously and visibly strive to enact the espoused Fab Lab ideology, i.e. offering access to empowering, distributed technologies that enable people to meet their own local needs by design, appear better able to identify and tackle the environmental sustainability issues as they arise. Environmental issues are also intertwined with and embedded in other ideological concerns, but they are rarely promoted in their own right. The thesis also details the current landscape of research literature on distributed production, who is studying these environmental issues and how, and the potential opportunities and threats in this new mode of production. The thesis thereby contributes to research on peer production communities, social shaping of technology and sustainable design. Knowledge of current maker practices and their sustainability implications have value for the peer communities studied, but also potentially technology developers and policy makers. As Fab Labs are experimental spaces for new digital manufacturing capabilities and activities, the wider implications of the findings may indicate how increasing digitalization and citizen involvement in production will transform design and production \textendash{} and the sustainability implications therein.}, - isbn = {978-952-60-6661-5}, - file = {/Users/fabio/Zotero/storage/RN3G6M6U/Making sustainability how Fab Labs address environmental issues.pdf} -} - -@article{Kohtala2017, - title = {Making ``{{Making}}'' {{Critical}}: {{How Sustainability}} Is {{Constituted}} in {{Fab Lab Ideology}}}, - author = {Kohtala, Cindy}, - year = {2017}, - journal = {Design Journal}, - volume = {20}, - number = {3}, - pages = {375--394}, - publisher = {{Routledge}}, - issn = {14606925}, - doi = {10.1080/14606925.2016.1261504}, - abstract = {Fab Labs, fabrication laboratories, are shared workshops where citizens can access digital fabrication equipment to design and make their own objects. They are proliferating rapidly and represent an alternative to mass production and consumption, an ideology whose environmental and social benefits their "makers" like to espouse. A longitudinal ethnographic study in a Fab Lab in a European design school examined the Lab's ideology building, how ideals were enacted and where compromises were visible. Environmental issues were intertwined with other ideological concerns, but they were rarely promoted in their own right. Engagement with sustainability-oriented makers and stakeholders is recommended.}, - keywords = {digital fabrication,distributed production,Fab Lab,open design,sustainability}, - file = {/Users/fabio/Zotero/storage/G6Y5LKGP/Making Making Critical How Sustainability is Constituted in Fab Lab Ideology.pdf} -} - -@article{Kojmane2016, - title = {Strengthening Engineering Design Skills of First-Year University Students under Resources Constraints}, - author = {Kojmane, Jihane and Aboutajeddine, Ahmed}, - year = {2016}, - journal = {International Journal of Mechanical Engineering Education}, - volume = {44}, - number = {2}, - pages = {148--164}, - issn = {20504586}, - doi = {10.1177/0306419016641006}, - abstract = {The 21st century global competition has emphasized design of innovative products and solutions as the core competency requested today in the job market for engineers. To produce good design thinkers, design activities must be implemented in engineering curriculums, and have to start at early years. In this prospect, many leading universities have launched many interesting initiatives. These initiatives are, however, arduous for implementation in the context of universities in the developing countries due to deep-rooted local constraints, like shortage of financial and skilled human resources. Therefore, some tailored design learning initiatives, taking into account these constraints, have to be developed. In this context, a cost-effective project has been designed and implemented, in our faculty, to early introduce mechanical engineering students, in their first years, to engineering design. The proposed project was designed with respect to a proposed framework of desired engineering design competencies in conjunction with concerns for overcoming constraints and barriers of implementation context. The project encompasses two successive activities for the first and second years. The first activity plunges the students in a design thinking approach to create robotic applications using only cost-effective robotic kits. The second activity is dedicated to the design, analysis, and building of mechanical systems using only commonly used materials and cheap open hardware devices. Through this project, the students significantly improved some targeted skills as creative problem solving, communication, and teamwork. Finally, the project is thought to be valuable for all universities with similar context of limited resources.}, - keywords = {design and build activities,design thinking,Engineering design,first and second year engineering students,mechanical engineering education}, - file = {/Users/fabio/Zotero/storage/89WW3EH9/Strengthening engineering design skills of first-year university students under resources constraints.pdf} -} - -@article{kokExploringPracticeLabs2023, - title = {Exploring the Practice of {{Labs}} for Sustainable Transformation: {{The}} Challenge of `Creating Impact'}, - shorttitle = {Exploring the Practice of {{Labs}} for Sustainable Transformation}, - author = {Kok, Kristiaan P. W. and {van der Meij}, Marjoleine G. and Wagner, Petra and Cesuroglu, Tomris and Broerse, Jacqueline E. W. and Regeer, Barbara J.}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {388}, - pages = {135994}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.135994}, - urldate = {2023-02-09}, - abstract = {Scholars have argued that transdisciplinary experimentation processes in Labs which include societal stakeholders in research and innovation might help to create meaningful societal impact. At the same time, there is ample room to explore the practice of `doing' Labs in relation to the transformative impacts that Labs aim to create. We present a case study of the FIT4FOOD2030 project (2017\textendash 2020) aimed at contributing to food system transformation in the EU through setting up 25 multi-stakeholder Labs. We aimed to gain insight into how transdisciplinary Labs with transformative ambitions try to create impact, and which challenges that brings along. For ``capacitating change'', Labs built agency by focusing on creating (1) new relations through network mobilization, network consolidation and network coordination; (2) new knowledge through knowledge sharing and social learning; and (3) new competences for Lab coordinators and engaged stakeholders. For ``creating change'' Labs focused on (1) transforming networks \textendash{} the Lab as catalyst; (2) transforming practices \textendash{} the Lab as concretizer; (3) transforming structures \textendash{} the Lab as construction site; (4) transforming cultures - the Lab as critical mass. We observed complex (reciprocal) relations between processes of capacitating and creating change. Finally, we present intrinsic challenges in the practice of `doing' Labs regarding the evaluation of single-Lab impacts, and the political dynamics of transformative Labs.}, - langid = {english}, - keywords = {Co-innovation processes,Societal transformation,Sustainability transitions,Transdisciplinarity,Transformative capacities,Transformative labs}, - file = {/Users/fabio/Zotero/storage/LRIU8KBB/Kok et al. - 2023 - Exploring the practice of Labs for sustainable tra.pdf;/Users/fabio/Zotero/storage/VBDHS9NJ/S095965262300152X.html} -} - -@article{kokPoliticsComplexityConceptualizing2021, - title = {Politics of Complexity: {{Conceptualizing}} Agency, Power and Powering in the Transitional Dynamics of Complex Adaptive Systems}, - author = {Kok, Kristiaan P.W. and Loeber, Anne M.C. and Grin, John}, - year = {2021}, - month = apr, - journal = {Research Policy}, - volume = {50}, - number = {3}, - pages = {104183}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104183}, - urldate = {2021-01-01}, - file = {/Users/fabio/Zotero/storage/K7RCZM8F/full-text.pdf} -} - -@article{koladeBusinessModelsTech2021, - title = {The Business Models of Tech Hubs in {{Africa}}: Implications for Viability and Sustainability}, - author = {Kolade, Oluwaseun and Atiase, Victor and Murithi, William and Mwila, Natasha}, - year = {2021}, - month = jun, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--13}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1947492}, - urldate = {2021-07-05}, - abstract = {The paper draws from two case studies of tech hubs in Nigeria and Kenya to investigate the importance of business models to the hubs' viability and sustainability as economic and social agents. Ado...}, - keywords = {business models,Tech hubs,technological innovations,triple-layered model} -} - -@article{koladeTechnologyAcceptanceReadiness2022, - title = {Technology Acceptance and Readiness of Stakeholders for Transitioning to a Circular Plastic Economy in {{Africa}}}, - author = {Kolade, Oluwaseun and Odumuyiwa, Victor and Abolfathi, Soroush and Schr{\"o}der, Patrick and Wakunuma, Kutoma and Akanmu, Ifeoluwa and Whitehead, Timothy and Tijani, Bosun and Oyinlola, Muyiwa}, - year = {2022}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {183}, - pages = {121954}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.121954}, - urldate = {2022-09-01}, - abstract = {Scholars and practitioners have highlighted the importance of digital innovations in the drive towards a circular plastic economy. Therefore this paper investigates the role of digital innovators and the public's response to digital innovations on the African continent. The study draws from four focus groups, and cross-sectional surveys of 33 digital innovators and 1475 community members across 20 low-middle income communities in five African countries. The results indicate that, while digital innovators are strongly optimistic and highly motivated, their engagement and impact on the circular plastic economy ecosystem are limited by a range of institutional, infrastructural and socio-cultural factors. Furthermore, results from the regression models of cross-sectional data of community members show that understanding of the technologies and perceived ease of use have significant positive impacts on uptake of technological innovations for the circular plastic economy, and perceived ease of use is also a significant moderator of barriers to adoption. The findings underline the need for a well-informed and motivated cohort of digital innovators to promote diffusion of circular plastic innovations. It also emphasizes the importance of a more collaborative, multistakeholder and multi-sectoral synergy to create a critical mass of the consumer public needed to break the linear economy lock-in mechanisms and accelerate the transition to a circular plastic economy in Africa.}, - langid = {english}, - keywords = {Circular economy,Circular plastic economy,Digital innovations,Technology acceptance,Technology lock-in,Technology readiness}, - file = {/Users/fabio/Zotero/storage/XITP4J84/Kolade et al. - 2022 - Technology acceptance and readiness of stakeholder.pdf;/Users/fabio/Zotero/storage/FGBLVZIK/S0040162522004759.html} -} - -@article{Komperda2017, - title = {Likert-Type Survey Data Analysis with {{R}} and {{RStudio}}}, - author = {Komperda, Regis}, - year = {2017}, - journal = {ACS Symposium Series}, - volume = {1260}, - pages = {91--116}, - issn = {19475918}, - doi = {10.1021/bk-2017-1260.ch007}, - abstract = {The free statistical software R and the free integrated development environment RStudio provide comprehensive tools to visualize and analyze quantitative survey data. The breadth of packages available to extend the functionality of R makes it a viable alternative to traditional software, such as Excel, SPSS, SAS, Stata, Mplus, and LISREL, frequently used for quantitative survey data analysis including providing psychometric evidence of instrument quality. Using a sample dataset available in R, this chapter will walk through the use of functions from the likert, psych, and lavaan packages. These packages can be used to visualize response pattern distributions from Likert-type items, generate descriptive statistics, examine evidence for internal consistency (Cronbach's a), and conduct various types of factor analyses to provide evidence for the internal structure of an instrument. While this chapter uses a dataset from a survey with a Likert response scale, the functions described can be applied to quantitative data obtained from a variety of instrument types. Examples from the chemistry education research literature of using these techniques for survey data analysis and instrument development will be highlighted.}, - isbn = {9780841232433}, - file = {/Users/fabio/Zotero/storage/7LW8BFDQ/komperda2017.pdf} -} - -@article{kongSystematicReviewBig2020, - title = {A Systematic Review of Big Data-Based Urban Sustainability Research: {{State-of-the-science}} and Future Directions}, - author = {Kong, Lingqiang and Liu, Zhifeng and Wu, Jianguo}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {273}, - pages = {123142}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123142}, - urldate = {2020-08-09}, - abstract = {The future of humanity depends increasingly on the performance of cities. Big data provide new and powerful ways of studying and improving coupled urban environmental, social, and economic systems to achieve urban sustainability. However, the term big data has been defined variably, and its urban applications have so far been sporadic in terms of research topic and location. A comprehensive review of big data-based urban environment, society, and sustainability (UESS) research is much needed. The aim of this study was to summarize the big data-based UESS research using a systematic review approach in combination with bibliometric and thematic analyses. The results showed that the numbers of publications and citations of related articles have been increasing exponentially in recent years. The most frequently used big data in UESS research are human behavior data, and the major analytical methods are of five types: classification, clustering, regression, association rules, and social network analysis. The major research topics of big data-based UESS research include urban mobility, urban land use and planning, environmental sustainability, public health and safety, social equity, tourism, resources and energy utilization, real estate, and retail, accommodation and catering. Big data benefit UESS research by proving a people-oriented perspective, timely and real-time information, and fine-resolution spatial dynamics. In addition, several obstacles were identified to applying big data in UESS research, which are related to data quality and acquisition, data storage and management, data security and privacy, data cleaning and preprocessing, and data analysis and information mining. To move forward, future research should integrate multiple big data sources, develop and utilize new methods such as deep learning and cloud computing, and expand the application fields to focus on the interactions between human activities and urban environments. This review can contribute to understanding the current situation of big data-based UESS research, and provide a reference for studies of this topic in the future.}, - keywords = {Big data,Smart city,Social media data,Urban landscape sustainability,Urban planning} -} - -@article{Konietzko2020, - title = {A {{Tool}} to {{Analyze}}, {{Ideate}} and {{Develop Circular Innovation Ecosystems}}}, - author = {Konietzko, Jan and Bocken, Nancy and Hultink, Erik Jan}, - year = {2020}, - month = jan, - journal = {Sustainability}, - volume = {12}, - number = {1}, - pages = {417}, - publisher = {{MDPI AG}}, - issn = {2071-1050}, - doi = {10.3390/su12010417}, - urldate = {2020-05-10}, - abstract = {The circular economy may help firms to maximize the value of their material resources and minimize the overall resource use, waste, pollution and emissions of their business activities. Implementing a circular economy program requires radical changes in product, business model and ecosystem innovation. Most research on circular oriented innovation takes a product or business model perspective. Few publications have explored how to innovate in ecosystems: how a group of loosely coupled organizations can change how they interact with each other to achieve a collective outcome. This study proposes the Circularity Deck: a card deck-based tool that can help firms to analyze, ideate and develop the circularity potential of their innovation ecosystems. The tool is based on a literature review of circular oriented innovation principles, and of practical examples that show how these principles have been applied. The principles are organized according to the intended circular strategy outcome that they pursue (i.e., narrow, slow, close, regenerate and inform material and energy flows), and the extent of the innovation perspective that is needed to operationalize a principle (i.e., product, business model, or ecosystem innovation). This review and categorization process first produced a novel analysis of the circular economy innovation landscape, using an ecosystem perspective. Second, these results served to develop the Circularity Deck, which was further developed and tested for ease of use and perceived usefulness in 12 workshops with 136 participants from 62 different organizations. The Circularity Deck provides an approach for future research and practice to integrate new principles and examples that can help firms to analyze, ideate and develop circular innovation ecosystems.}, - file = {/Users/fabio/Zotero/storage/HYYQVRUF/full-text.pdf} -} - -@article{konietzkoCircularBusinessModel2020, - title = {Circular Business Model Experimentation: {{Demystifying}} Assumptions}, - author = {Konietzko, Jan and Baldassarre, Brian and Brown, Phil and Bocken, Nancy and Hultink, Erik Jan}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - pages = {122596}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122596}, - urldate = {2020-07-14} -} - -@article{konietzkoRegenerativeBusinessModels2023, - title = {Towards Regenerative Business Models: {{A}} Necessary Shift?}, - shorttitle = {Towards Regenerative Business Models}, - author = {Konietzko, Jan and Das, Ankita and Bocken, Nancy}, - year = {2023}, - month = apr, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.04.014}, - urldate = {2023-05-02}, - abstract = {Regeneration has become a debated topic in organizational studies, yet its characteristics and distinctions from sustainability and circular business models remain unclear. This study aims to provide an initial framework for regenerative business models and differentiate them from sustainable or circular models. Employing literature reviews, six focus groups with international and indigenous participants, and comparisons with seminal articles on sustainable and circular models, this study finds that organizations with regenerative business models focus on planetary health and societal wellbeing. They create and deliver value at multiple stakeholder levels\textemdash including nature, societies, customers, suppliers and partners, shareholders and investors, and employees\textemdash through activities promoting regenerative leadership, co-creative partnerships with nature, and justice and fairness. Capturing value through multi-capital accounting, they aim for a net positive impact across all stakeholder levels. Regenerative business models share design approaches with sustainable and circular models but differ in their main goals and systemic perspectives. Achieving regenerative business models requires strong policy frameworks, including animal and nature rights and true pricing. Further research is needed to explore how organizations can incorporate intrinsic notions of value beyond capital and avoid new forms of greenwashing when adopting regeneration and net positive impact narratives.}, - langid = {english}, - keywords = {Circular economy,Nature positive,Net positive,Regeneration,Regenerative business models,Sustainable business models}, - file = {/Users/fabio/Zotero/storage/TCVGCXTY/Konietzko et al_2023_Towards regenerative business models.pdf;/Users/fabio/Zotero/storage/AHSF5WM4/S2352550923000866.html} -} - -@article{Konrad2019, - title = {Socio-Technical Futures and the Governance of Innovation Processes\textemdash{{An}} Introduction to the Special Issue}, - author = {Konrad, Kornelia and B{\"o}hle, Knud}, - year = {2019}, - month = may, - journal = {Futures}, - volume = {109}, - pages = {101--107}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.03.003}, - urldate = {2020-05-21}, - abstract = {This special issue analyses and reflects on socio-technical futures as core elements in innovation processes and their governance. The special issue assembles twelve contributions that draw on several lines of research mobilizing concepts developed in science and technology studies, such as socio-technical imaginaries and the sociology of expectations, and technology assessment. The papers examine how socio-technical futures are constituted, change and unfold over time, shaped by different practices and in different contexts. Furthermore, they study how different socio-technical futures circulate amongst policy actors and others involved in the governance of innovations, how they shape the governance of innovations and the actual technologies and systems, and how forms of deliberative and reflective future-making can be integrated into policy and innovation processes.}, - keywords = {Anticipatory practices,Governance of innovation,Policy,Socio-technical imaginaries,Sociology of expectations,Technology assessment}, - file = {/Users/fabio/Zotero/storage/QXYEUEG4/full-text.pdf} -} - -@article{Koole2020, - title = {Trusting to Learn and Learning to Trust. {{A}} Framework for Analyzing the Interactions of Trust and Learning in Arrangements Dedicated to Instigating Social Change}, - author = {Koole, Barbara}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120260}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120260}, - urldate = {2020-09-01}, - abstract = {To help instigate structural change towards resolving societal problems, a key role can be assigned to so-called reflexive arrangements: temporary networks dedicated to reflexive learning. This article raises attention to the central role of trust in such reflexive arrangements. Although the relevance of trust in learning is often acknowledged, there is not yet a clear understanding of how trust influences learning processes. Many different roles are attributed to trust, leading to conceptual confusion. This article develops a heuristic framework for studying the relationship between trust and reflexive learning, which is regarded as a continuous process of reaction, interaction and anticipation. The framework also proposes an analytical distinction between (inter-) personal, (inter-) organizational and system dimensions of trust in reflexive arrangements, which enables analysis of trust and learning interactions.}, - file = {/Users/fabio/Zotero/storage/JI7J5YGF/Conceptualising technology, its development and future The six genres of technology.pdf} -} - -@article{Koomey2013, - title = {Smart {{Everything}}: {{Will Intelligent Systems Reduce Resource Use}}?}, - author = {Koomey, Jonathan G. and Matthews, H. Scott and Williams, Eric}, - year = {2013}, - journal = {Ssrn}, - issn = {1543-5938}, - doi = {10.1146/annurev-environ-021512-110549}, - abstract = {Until recently, the main environmental concerns associated with information and communication technologies (ICTs) have been their use-phase electricity consumption and the chemicals associated with their manufacture, and the environmental effects of these technologies on other parts of the economy have largely been ignored. With the advent of mobile computing, communication, and sensing devices, these indirect effects have the potential to be much more important than the impacts from the use and manufacturing phases of this equipment. This article summarizes the trends that have propelled modern technological societies into the ultralow-power design space and explores the implications of these trends for the direct and indirect environmental impacts associated with these new technologies. It reviews the literature on environmental effects of information technology (also with an emphasis on low-power systems) and suggests areas for further research.}, - isbn = {1543-5938\textbackslash r1545-2050}, - pmid = {1027070}, - file = {/Users/fabio/Zotero/storage/8Z2RLTIM/Smart Everything Will Intelligent Systems Reduce Resource Use.pdf} -} - -@article{Kopinke1996, - title = {Thermal Decomposition of Biodegradable Polyesters -{{II}}. {{Poly}} ( Lactic Acid )}, - author = {Kopinke, F and Remmler, M and Mackenzie, K and Moder, M and Wachsen, O.}, - year = {1996}, - journal = {Polymer Degradation and Stability}, - volume = {53}, - pages = {329--342}, - issn = {01413910}, - doi = {s0141-3910(96)00102-4}, - file = {/Users/fabio/Zotero/storage/YKBCXDC2/Thermal decomposition of biodegradable polyesters -II. Poly ( lactic acid ).pdf} -} - -@article{Kopnina2019, - ids = {kopnina2019}, - title = {Green-Washing or Best Case Practices? {{Using}} Circular Economy and {{Cradle}} to {{Cradle}} Case Studies in Business Education}, - author = {Kopnina, Helen}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {219}, - pages = {613--621}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.005}, - keywords = {Circular economy,Cradle to Cradle,Education for sustainability,Sustainable production} -} - -@article{kopperoinenUsingExpertKnowledge2014, - title = {Using Expert Knowledge in Combining Green Infrastructure and Ecosystem Services in Land Use Planning: {{An}} Insight into a New Place-Based Methodology}, - author = {Kopperoinen, Leena and Itkonen, Pekka and Niemel{\"a}, Jari}, - year = {2014}, - month = oct, - journal = {Landscape Ecology}, - volume = {29}, - number = {8}, - pages = {1361--1375}, - publisher = {{Kluwer Academic Publishers}}, - issn = {15729761}, - doi = {10.1007/s10980-014-0014-2}, - urldate = {2021-05-17}, - abstract = {Green infrastructure (GI) is a strategic planning instrument to achieve sustainable development. The main functions of GI are to protect biodiversity and safeguard and enhance the provision of ecosystem services (ES). In this paper we present the development of a semi-quantitative place-based method, aiming at assessing GI based on the provision potential of all main ES. Our method combines a wide spectrum of GIS data with expert assessments. Here we focus especially on how interaction with experts and local and regional actors impacted the method development. Our results showed that involving experts in dataset selection is very useful in compiling the most relevant data for the assessment of ES. Expert knowledge is also valuable in evaluating the actual coverage and quality of datasets. By involving both experts and local and regional actors in assessing ES provision potential we can add local knowledge to the general scientific understanding. Qualitative assessments can be complemented with quantitative data in our method. The resulting maps support land use planning, as they assist in identifying the multifunctional key areas of GI and in examining the provision potential of various ES. The group discussions involved in our method provided an additional benefit, as the experts and local and regional actors felt that this discussion platform enhanced their understanding of both GI and ES.}, - keywords = {Expert assessment,Expert knowledge,GIS,Mapping,Method development,Participatory assessment}, - file = {/Users/fabio/Zotero/storage/6QY9DUEY/full-text.pdf} -} - -@article{Koren2015, - title = {Product Design for Mass-Individualization}, - author = {Koren, Y. and Shpitalni, M. and Gu, P. and Hu, S.J.}, - year = {2015}, - journal = {Procedia CIRP}, - volume = {36}, - pages = {64--71}, - issn = {22128271}, - doi = {10.1016/j.procir.2015.03.050} -} - -@article{Korhonen2018, - title = {Circular Economy as an Essentially Contested Concept}, - author = {Korhonen, Jouni and Nuur, Cali and Feldmann, Andreas and Birkie, Seyoum Eshetu}, - year = {2018}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {175}, - pages = {544--552}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.12.111}, - abstract = {The Circular Economy (CE) is currently a popular notion within the policy and business advocacy groups. Despite being visionary and provocative in its message, the research on the CE concept is emerging. The two intertwined objectives of the paper are; first to identify, discuss and develop the various definitions provided by the emerging literature. Secondly, to suggest an initial research approach with which research on CE can be conducted. Our analysis shows that the existing CE work is mainly done on the practical and technical levels of the actual physical flows of materials and energy in production-consumption systems. The focus of the extant literature is on concrete metrics, tools, instruments and computations. Therefore, the basic assumptions concerning the values, societal structures, cultures, underlying world-views and the paradigmatic potential of CE remain largely unexplored. We argue that CE has already become what Gallie (1955) more than six decades ago termed as an ``essentially contested concept'' (ECC). The paper further suggests a model for CE research that helps in the categorization, classification and organization of research and investigation on CE. The model can help in limiting the observed unbalance and enhance the contribution of the CE approach to a more sustainable global society.}, - isbn = {0959-6526}, - keywords = {Circular economy,Essentially contested concepts,Scientific research,Sustainable development}, - file = {/Users/fabio/Zotero/storage/5TJLCXMU/Circular economy as an essentially contested concept.pdf} -} - -@article{Korhonen2018a, - title = {Circular {{Economy}}: {{The Concept}} and Its {{Limitations}}}, - author = {Korhonen, Jouni and Honkasalo, Antero and Sepp{\"a}l{\"a}, Jyri}, - year = {2018}, - month = jan, - journal = {Ecological Economics}, - volume = {143}, - pages = {37--46}, - publisher = {{Elsevier B.V.}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2017.06.041}, - abstract = {Circular economy (CE) is currently a popular concept promoted by the EU, by several national governments and by many businesses around the world. However, the scientific and research content of the CE concept is superficial and unorganized. CE seems to be a collection of vague and separate ideas from several fields and semi-scientific concepts. The objective of this article is to contribute to the scientific research on CE. First, we will define the concept of CE from the perspective of WCED sustainable development and sustainability science. Second, we will conduct a critical analysis of the concept from the perspective of environmental sustainability. The analysis identifies six challenges, for example those of thermodynamics and system boundaries, that need to be resolved for CE to be able to contribute to global net sustainability. These six challenges also serve as research themes and objectives for scholars interested in making progress in sustainable development through the usage of circular economy. CE is important for its power to attract both the business community and policy-making community to sustainability work, but it needs scientific research to secure that the actual environmental impacts of CE work toward sustainability.}, - isbn = {0921-8009}, - keywords = {Business strategy,Circular economy,Global net sustainability,Scientific research,Six limitations,System boundaries,Thermodynamics}, - file = {/Users/fabio/Zotero/storage/G9NDVIGZ/Circular Economy- The Concept and its Limitations.pdf} -} - -@article{korsunovaConsumerDecisionmakingRepair2023, - title = {Consumer Decision-Making on Repair in a Circular Economy: {{A}} Process Model Based on Experiences among Young Adults and Stakeholders in {{Finland}}}, - shorttitle = {Consumer Decision-Making on Repair in a Circular Economy}, - author = {Korsunova, Angelina and Heiskanen, Eva and Vainio, Annukka}, - year = {2023}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {405}, - pages = {137052}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137052}, - urldate = {2023-05-01}, - abstract = {The repair industry, consumer expenditure on repair and the number of repair businesses have been steadily decreasing in many European countries over the last 20\textendash 40 years. Our study focuses on consumer repair as a practice, with an emphasis on the interactions between propensity to repair, experience of repair and societal rules and structures that affect repair decisions in different phases of product lifetimes. Moreover, exploring the consumer repair process enables a nuanced understanding of the different paths leading to self-repair, professional repair or non-repair decisions. Drawing on past repair and non-repair experiences (n~=~98) of young adults residing in Finland, we develop a consumer repair process model reflective of the individual perceptions, but also of the structural problems that enable or impede repair in the Finnish context. Further, we complement this data with semi-structured interviews of selected repair industry actors and representatives of the educational sector (n~=~9), discussing interventions to encourage repair in business, legal and educational systems. The results highlight the role of consumer experience of repair and its situatedness in the shared cultural context, suggesting implications for institutionalizing experience of repair in primary education and other societal activities in order to enhance consumers' propensity to repair. As a conclusion, we suggest that shifting societal perceptions and rhetoric around repair requires innovative solutions involving actors across production and consumption systems. While not all countries have a strong repair caf\'e culture, explicit municipal collaboration with businesses and educators for repair can lead to the development of new services and spaces for systematically embedding repair in the society. These perspectives from the Finnish settings might be particularly informative coming from a country highly involved in the circular economy.}, - langid = {english}, - keywords = {Circular economy,Consumers,Education,Repair,Stakeholders,Sustainable consumption}, - file = {/Users/fabio/Zotero/storage/4KYNHHWU/Korsunova et al_2023_Consumer decision-making on repair in a circular economy.pdf;/Users/fabio/Zotero/storage/WC8MT9MP/S0959652623012106.html} -} - -@article{korsunovaUnderstandingCircularEconomy2020, - title = {Understanding {{Circular Economy}} in {{Everyday Life}}: {{Perceptions}} of {{Young Adults}} in the {{Finnish Context}}}, - author = {Korsunova, Angelina and Horn, Susanna and Vainio, Annukka}, - year = {2020}, - month = dec, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.12.038}, - urldate = {2021-01-01} -} - -@article{kortetmakiSocialVulnerabilityClimate2021, - title = {Social Vulnerability to Climate Policies: {{Building}} a Matrix to Assess Policy Impacts on Well-Being}, - author = {Kortetm{\"a}ki, Teea and J{\"a}rvel{\"a}, Marja}, - year = {2021}, - month = sep, - journal = {Environmental Science \& Policy}, - volume = {123}, - pages = {220--228}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.05.018}, - urldate = {2021-06-10}, - file = {/Users/fabio/Zotero/storage/AIM8LQFQ/full-text.pdf} -} - -@book{Koskinen2011c, - title = {Design Research through Practice: {{From}} the Lab, Field, and Showroom.}, - author = {Koskinen, I and Zimmerman, J and Binder, T and Redstrom, J and Wensveen, S}, - year = {2011}, - journal = {Electrical Engineering}, - publisher = {{Morgan Kaufman}}, - address = {{MA, USA}}, - isbn = {978-0-12-385502-2}, - keywords = {battery,micro hybrid,model selection} -} - -@article{Kostakis2013, - title = {Commons-Based Peer Production and Digital Fabrication: {{The}} Case of a {{RepRap-based}}, {{Lego-built 3D}} Printing-Milling Machine}, - author = {Kostakis, Vasilis and Papachristou, Marios}, - year = {2014}, - month = aug, - journal = {Telematics and Informatics}, - volume = {31}, - number = {3}, - pages = {434--443}, - publisher = {{Elsevier Ltd}}, - issn = {07365853}, - doi = {10.1016/j.tele.2013.09.006}, - urldate = {2014-03-05}, - abstract = {Through the case of the RepRap-based, Lego-built three-dimensional (3D) printing-milling machine, this paper sets out to discuss and illustrate two points: First, on a theoretical level, that modularity, not only in terms of development process but also of hardware com- ponents, can catalyze Commons-based peer production's (CBPP) replication for tangible products enabling social experimentation and learning. Second, the hybrid 3D printing- milling machine demonstrates the digitization of material and the potential of digital fab- rication. We show how the synergy of a globally accessible knowledge Commons as well as of the CBPP practices with digital fabrication technologies, which are advancing and becoming more and more accessible, can arguably offer the ability to think globally and produce locally.}, - keywords = {3D printing,Collaboration,Commons,Lego,Modularity,Voxels}, - file = {/Users/fabio/Zotero/storage/GIZ47YLT/Commons-based peer production and digital fabrication The case of a RepRap-based, Lego-built 3D printing-milling machine.pdf} -} - -@article{Kostakis2013a, - title = {Peer {{Production}} and {{Desktop Manufacturing}}: {{The Case}} of the {{Helix}}\_{{T Wind Turbine Project}}}, - author = {Kostakis, Vasilis and Fountouklis, Michail and Drechsler, Wolfgang}, - year = {2013}, - month = nov, - journal = {Science, Technology \& Human Values}, - volume = {38}, - number = {6}, - pages = {773--800}, - issn = {0162-2439}, - doi = {10.1177/0162243913493676}, - abstract = {Through the case of the Helix\_T wind turbine project, this article sets out to argue two points: first, on a theoretical level, that Commons-based peer production, in conjunction with the emerging technological capabilities of three-dimensional printing, can also produce promising hardware, globally designed and locally produced. Second, the Commons-oriented wind turbine examined here is also meant to practically contribute to the quest for novel solutions to the timely problem of the need for (autonomous) renewable sources of energy, more in the sense of a development process than as a ready-to-apply solution. We demonstrate that it is possible for someone with partial initial knowledge to initiate a similar, complex project based on an interesting idea, and to succeed in implementing it through collaboration with Commons-oriented communities, while using peer-produced products and tools. Given the trends and trajectories both of the current information-based paradigm and the problems of the predominant industrial modes of production with all the collateral damage they entail, this may be considered a positive message indeed.}, - file = {/Users/fabio/Zotero/storage/A473GKMM/Peer Production and Desktop Manufacturing The Case of the Helix_T Wind Turbine Project.pdf} -} - -@article{Kostakis2013b, - title = {At the {{Turning Point}} of the {{Current Techno-Economic Para-}} Digm : {{Commons-Based Peer Production}} , {{Desktop Manufac-}} Turing and the {{Role}} of {{Civil Society}} in the {{Perezian Frame-}} Work}, - author = {Kostakis, Vasilis}, - year = {2013}, - volume = {11}, - number = {1}, - pages = {173--190}, - keywords = {0 and governance,014006,21st century europe,3d printing,acknowledgement,and chal-,and etf 8571,by the grants sf,challenges to state modernization,civil society,collaboration,commons,economics,heterodox,in,institutional and normative changes,peer production,techno-economic paradigm shifts,the research was supported,web 2}, - file = {/Users/fabio/Zotero/storage/KQS3DT2T/At the Turning Point of the Current Techno-Economic Para- digm Commons-Based Peer Production , Desktop Manufac- turing and the Role of.pdf} -} - -@article{Kostakis2014, - title = {Open Source {{3D}} Printing as a Means of Learning: {{An}} Educational Experiment in Two High Schools in {{Greece}}}, - author = {Kostakis, Vasilis and Niaros, Vasilis and Giotitsas, Christos}, - year = {2015}, - month = feb, - journal = {Telematics and Informatics}, - volume = {32}, - number = {1}, - pages = {118--128}, - publisher = {{Elsevier Ltd}}, - issn = {07365853}, - doi = {10.1016/j.tele.2014.05.001}, - urldate = {2014-06-08}, - abstract = {This research project attempts to examine to what extent the technological capabilities of open source 3D printing could serve as a means of learning and communication. The learn- ing theory of constructionism is used as a theoretical framework in creating an experimen- tal educational scenario focused on 3D design and printing. In this paper, we document our experience and discuss our findings from a three-month project run in two high schools in Ioannina, Greece. 33 students were tasked to collaboratively design and produce, with the aid of an open source 3D printer and a 3D design platform, creative artifacts. Most of these artifacts carry messages in the Braille language. Our next goal, which defined this project's context, is to send the products to blind children inaugurating a novel way of communica- tion and collaboration amongst blind and non-blind students. Our experience, so far, is positive arguing that 3D printing and design can electrify various literacies and creative capacities of children in accordance with the spirit of the interconnected, information- based world}, - keywords = {3D Printing,Collaboration,Constructionism,Education,Open source}, - file = {/Users/fabio/Zotero/storage/FU4CACAF/Kostakis, Niaros, Giotitsas - 2015 - Open source 3D printing as a means of learning An educational experiment in two high schools in Gre.pdf} -} - -@article{Kostakis2018, - title = {The Convergence of Digital Commons with Local Manufacturing from a Degrowth Perspective: {{Two}} Illustrative Cases}, - author = {Kostakis, Vasilis and Latoufis, Kostas and Liarokapis, Minas and Bauwens, Michel}, - year = {2018}, - journal = {Journal of Cleaner Production}, - volume = {197}, - pages = {1684--1693}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2016.09.077}, - abstract = {The emerging discussion about the sustainability potential of distributed production is the starting point for this paper. The focus is on the ``design global, manufacture local'' model. This model builds on the conjunction of the digital commons of knowledge and design with desktop and benchtop manufacturing technologies (from three-dimensional printers and laser cutters to low-tech tools and crafts). Two case studies are presented to illustrate three interlocked practices of this model for degrowth. It is argued that a ``design global, manufacture local'' model, as exemplified by these case studies, seems to arise in a significantly different political economy from that of the conventional industrial model of mass production. ``Design global, manufacture local'' may be seen as a platform to bridge digital and knowledge commons with existing physical infrastructures and degrowth communities, in order to achieve distributed modes of collaborative production.}, - keywords = {Commons,Degrowth,Localization,Open hardware,Open source}, - file = {/Users/fabio/Zotero/storage/FEUIF625/The convergence of digital commons with local manufacturing from a degrowth perspective- Two illustrative cases.pdf} -} - -@article{kostakisCanPeerProduction2021, - title = {Can Peer Production Democratize Technology and Society? {{A}} Critical Review of the Critiques}, - author = {Kostakis, Vasilis and Vragoteris, Vangelis and Acharja, Indra Lal}, - year = {2021}, - month = aug, - journal = {Futures}, - volume = {131}, - pages = {102760}, - publisher = {{Elsevier BV}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102760}, - urldate = {2021-06-08} -} - -@article{kostakisPoliticalEcologyDigital2016, - title = {Towards a Political Ecology of the Digital Economy: {{Socio-environmental}} Implications of Two Competing Value Models}, - shorttitle = {Towards a Political Ecology of the Digital Economy}, - author = {Kostakis, Vasilis and Roos, Andreas and Bauwens, Michel}, - year = {2016}, - month = mar, - journal = {Environmental Innovation and Societal Transitions}, - volume = {18}, - pages = {82--100}, - issn = {2210-4224}, - doi = {10.1016/j.eist.2015.08.002}, - urldate = {2022-10-16}, - abstract = {This article explores the socio-environmental implications of two different value models currently competing for dominance in the digital economy: the neo-feudal cognitive capitalism (NFCC) and the hypothetical case of mature peer production (HMPP). Using a systematisation that considers environmental effects of information and communication technologies as direct, indirect and structural, this article discerns the future socio-environmental scenarios indicative of each value model. We argue that the two value models share the same type of direct environmental effects associated with a similar technological infrastructure; however, their indirect effects differ in prospects of consumer behaviour, environmental awareness and product design. Likewise the difference in structural effects is significant as the NFCC is based on profit maximisation and an accumulation of capital, whereas the HMPP is agnostic to growth and oriented towards the commons. Hence, the latter is considered as the socio-environmentally auspicious choice, but comes not without transitional challenges of its own.}, - langid = {english}, - keywords = {Digital economy,Environmental sustainability,ICT,Peer-to-peer,Political ecology,Techno-economic paradigm shifts}, - file = {/Users/fabio/Zotero/storage/5RPAECP4/Kostakis et al_2016_Towards a political ecology of the digital economy.pdf;/Users/fabio/Zotero/storage/UH3PRP3G/S2210422415300150.html} -} - -@article{Kotiranta2020, - title = {Forms and Varieties of Research and Industry Collaboration across Disciplines}, - author = {Kotiranta, Annu and Tahvanainen, Antti and Kovalainen, Anne and Poutanen, Seppo}, - year = {2020}, - month = mar, - journal = {Heliyon}, - volume = {6}, - number = {3}, - publisher = {{Elsevier Ltd}}, - issn = {24058440}, - doi = {10.1016/j.heliyon.2020.e03404}, - urldate = {2020-04-22}, - abstract = {Economics; Industry; Sociology; Research institution-industry links; Types of research-industry collaboration; Levels of research-industry collaboration; Disciplines; Individual motivation; Science and technology studies; Research policy studies; University-industry collaboration; Knowledge transfer.}, - keywords = {Disciplines,Economics,Individual motivation,Industry,Knowledge transfer,Levels of research-industry collaboration,Research institution-industry links,Research policy studies,Science and technology studies,Sociology,Types of research-industry collaboration,University-industry collaboration}, - file = {/Users/fabio/Zotero/storage/D5WQPDXN/full-text.pdf} -} - -@article{kouloumpisDoesCircularityEnd2023, - title = {Does the Circularity End Justify the Means? {{A}} Life Cycle Assessment of Preparing Waste Electrical and Electronic Equipment for Reuse}, - shorttitle = {Does the Circularity End Justify the Means?}, - author = {Kouloumpis, Victor and Konstantzos, Giorgos E. and Chroni, Christina and Abeliotis, Konstadinos and Lasaridi, Katia}, - year = {2023}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {41}, - pages = {291--304}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.08.008}, - urldate = {2023-08-31}, - abstract = {Waste Electrical and Electronic Equipment (WEEE) pose a significant threat to the environment and public health due to the hazardous substances and the valuable and often scarce resources they contain. Policies for WEEE recycling have been adopted in most countries, while in the European Union the WEEE Directive renders preparing for reuse as a priority, although specific quantitative targets have not been imposed so far. Preparation for reuse to be effective requires improved WEEE collection networks and additional infrastructure, such as sorting and repair centres, all of which consume energy and materials, which also have environmental impacts. Moreover, refurbished appliances may be less energy efficient and there is a need to assess whether this benefit justifies the preparation for reuse burdens. The aim of this study was to investigate, under real-life operating conditions, whether the life cycle environmental impacts resulting from the preparation for reuse of WEEE are offset by the benefits of avoiding a new product purchase, which may have a lower energy consumption during its use lifespan. Data for desktops, laptops, monitors, printers, smartphones, and vacuum cleaners were collected from the two full-scale sorting centres in Greece, and life cycle assessments were performed. Results indicate that repair and reuse of smartphones leads to a reduction of their environmental impacts up to 25~\%. To a lesser degree, laptops, desktops, and monitors, lead to reduce environmental impacts from -1.4~\% to 19.2~\%. For printers, the reductions are almost negligible, from 0.3~\% to 3~\%. On the other side, the repair and reuse of vacuum cleaners resulted in an increase of almost all their environmental impacts instead, even more than 70~\% for marine and freshwater eutrophication. These findings can be used to the policy discourse for specific preparing for reuse targets and to inform decision-making. This could lead to prioritising specific categories for repair such as smartphones while avoiding specific WEEE categories from preparing for reuse such as vacuum cleaners and instead promote their substitution.}, - keywords = {Circular economy,Life cycle assessment (LCA),Preparing for reuse,Repair,Sorting centres,Waste electrical and electronic equipment (WEEE)}, - file = {/Users/fabio/Zotero/storage/NT9NJSSL/S235255092300194X.html} -} - -@book{Kovacic2019, - title = {The Circular Economy in {{Europe}}}, - author = {Defait, Vincent}, - year = {2019}, - journal = {Spore}, - number = {194}, - issn = {10110054}, - urldate = {2021-01-04}, - file = {/Users/fabio/Zotero/storage/PHVZQFRF/full-text.pdf} -} - -@article{Kraft-Todd2021, - title = {Practice {{What You Preach}} : {{Credibility-Enhancing Displays}} and the {{Growth}} of {{Open Science}}}, - author = {Paper, Working and Peer, Under}, - year = {2021}, - doi = {10.1016/j.obhdp.2020.10.009}, - urldate = {2021-01-12}, - abstract = {How can individual scientists most effectively spread the adoption of open science practices? Engaging in open science practices presents a social dilemma because they are individually costly (given the current incentive schemes in academia) but collectively beneficial (due to production of higher quality and more accessible science). Mechanisms for promoting cooperation in social dilemmas typically rely on normativity-but open science practices are still comparatively rare. Further, individuals may be tempted to dishonestly "virtue signal" due to growing support for open science. We formulate a solution based on the theory of credibility-enhancing displays: advocates who are known to themselves practice the behavior they are advocating for (particularly if they are prestigious) are more effective at convincing others-specifically because their actions provide an honest signal of their belief in the behavior's value. Thus, advocates for open science practices should find ways to engage in those practices visibly and often.}, - keywords = {Cooperation,Credibility-enhancing displays,Open science,Prestige,Social dilemma,Social norms,Virtue signaling}, - file = {/Users/fabio/Zotero/storage/Z7ZZ2QRZ/full-text.pdf} -} - -@article{Kranzinger2018, - title = {Output-Oriented Analysis of the Wet Mechanical Processing of Polyolefin-Rich Waste for Feedstock Recycling}, - author = {Kranzinger, Lukas and Pomberger, Roland and Schwabl, Daniel and Flachberger, Helmut and Bauer, Markus and Lehner, Markus and Hofer, Wolfgang}, - year = {2018}, - month = may, - journal = {Waste Management \& Research}, - volume = {36}, - number = {5}, - pages = {445--453}, - issn = {0734-242X}, - doi = {10.1177/0734242X18764294}, - file = {/Users/fabio/Zotero/storage/PTUAB53I/Output-oriented analysis of the wet mechanical processing of polyolefin-rich waste for feedstock recycling.pdf} -} - -@article{Kravchenko2019, - title = {Towards the Ex-Ante Sustainability Screening of Circular Economy Initiatives in Manufacturing Companies: {{Consolidation}} of Leading Sustainability-Related Performance Indicators}, - author = {Kravchenko, Mariia and Pigosso, Daniela CA. and McAloone, Tim C.}, - year = {2019}, - month = sep, - journal = {Journal of Cleaner Production}, - pages = {118318}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118318}, - file = {/Users/fabio/Zotero/storage/Q4ZGVR9G/Towards the ex-ante sustainability screening of circular economy initiatives in manufacturing companies- Consolidation of leading sustainability-related performance indicators.pdf} -} - -@book{krcmarTeachingInnovationInterdisciplinary2018, - title = {Teaching {{Innovation}} in {{Interdisciplinary Environments}}: {{Toward}} a {{Design Thinking Syllabus}}}, - shorttitle = {Teaching {{Innovation}} in {{Interdisciplinary Environments}}}, - author = {Krcmar, Helmut and Wiesche, Manuel and Lang, Michael}, - year = {2018}, - month = dec, - abstract = {An increasing number of universities offer user-centric innovation courses based on the principles of design thinking. Lecturers combine a plethora of design thinking elements in design thinking course syllabi and thereby adopt teaching styles that range from autonomy-supportive to structured. Using a balance between these two teaching styles seems most suitable to optimally engage students and provide guidance through the innovation process. To develop a syllabus for innovation courses, we draw on best practices currently being undertaken in universities worldwide and examine 11 design thinking syllabi from different departments (Engineering, Design, Business, and Information Systems). We identify 17 common and 18 unique elements of design thinking courses and related course materials. Based on our results, we propose a design thinking syllabus that includes suggestions for course objectives, course setup, assignment design, and team composition using a balance between autonomous-support and structural teaching styles.}, - file = {/Users/fabio/Zotero/storage/7QN6TEAS/Krcmar et al_2018_Teaching Innovation in Interdisciplinary Environments.pdf} -} - -@article{Kreiger2013, - title = {Environmental {{Impacts}} of {{Distributed Manufacturing}} from 3-{{D Printing}} of {{Polymer Components}} and {{Products}}}, - author = {Kreiger, Megan and Pearce, Joshua M.}, - year = {2013}, - month = mar, - journal = {MRS Proceedings}, - volume = {1492}, - pages = {85--90}, - issn = {0272-9172}, - doi = {10.1557/opl.2013.319}, - urldate = {2014-02-02}, - abstract = {Although additive layer manufacturing is well established for rapid prototyping the low throughput and historic costs have prevented mass-scale adoption. The recent development of the RepRap, an open source self-replicating rapid prototyper, has made low-cost 3-D printers readily available to the public at reasonable prices ({$<\$$}1,000). The RepRap (Prusa Mendell variant) currently prints 3-D objects in a 200x200x140 square millimeters build envelope from acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA). ABS and PLA are both thermoplastics that can be injection-molded, each with their own benefits, as ABS is rigid and durable, while PLA is plant-based and can be recycled and composted. The melting temperature of ABS and PLA enable use in low-cost 3-D printers, as these temperature are low enough to use in melt extrusion in the home, while high enough for prints to retain their shape at average use temperatures. Using 3-D printers to manufacture provides the ability to both change the fill composition by printing voids and fabricate shapes that are impossible to make using tradition methods like injection molding. This allows more complicated shapes to be created while using less material, which could reduce environmental impact.}, - file = {/Users/fabio/Zotero/storage/RV2UKRTF/Kreiger, Pearce - 2013 - Environmental Impacts of Distributed Manufacturing from 3-D Printing of Polymer Components and Products.pdf} -} - -@article{Kreiger2014, - title = {Life Cycle Analysis of Distributed Recycling of Post-Consumer High Density Polyethylene for 3-{{D}} Printing Filament}, - author = {Kreiger, M.a. and Mulder, M.L. and Glover, A.G. and Pearce, J.M.}, - year = {2014}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {70}, - pages = {90--96}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2014.02.009}, - urldate = {2014-05-14}, - abstract = {The growth of desktop 3-D printers is driving an interest in recycled 3-D printer filament to reduce costs of distributed production. Life cycle analysis studies were performed on the recycling of high density polyethylene into filament suitable for additive layer manufacturing with 3-D printers. The conventional centralized recycling system for high population density and low population density rural locations was compared to the proposed in home, distributed recycling system. This system would involve shredding and then producing filament with an open-source plastic extruder from post-consumer plastics and then printing the extruded filament into usable, value-added parts and products with 3-D printers such as the open-source self replicating rapid prototyper, or RepRap. The embodied energy and carbon dioxide emissions were calculated for high density polyethylene recycling using SimaPro 7.2 and the database EcoInvent v2.0. The results showed that distributed recycling uses less embodied energy than the best- case scenario used for centralized recycling. For centralized recycling in a low-density population case study involving substantial embodied energy use for transportation and collection these savings for distributed recycling were found to extend to over 80\%. If the distributed process is applied to the U.S. high density polyethylene currently recycled, more than 100 million MJ of energy could be conserved per annum along with the concomitant significant reductions in greenhouse gas emissions. It is concluded that with the open-source 3-D printing network expanding rapidly the potential for widespread adop- tion of in-home recycling of post-consumer plastic represents a novel path to a future of distributed manufacturing appropriate for both the developed and developing world with lower environmental impacts than the current system}, - keywords = {Distributed recycling,Life cycle analysis,Plastic,Polymer,Recycling,Transportation energy}, - file = {/Users/fabio/Zotero/storage/VBUNFSF3/Kreiger et al. - 2014 - Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filamen.pdf} -} - -@article{Kremer2016, - title = {Key Insights for the Future of Urban Ecosystem Services Research}, - author = {Kremer, Peleg and Hamstead, Zo{\'e} and Haase, Dagmar and McPhearson, Timon and Frantzeskaki, Niki and Andersson, Erik and Kabisch, Nadja and Larondelle, Neele and Rall, Emily L and Voigt, Annette and Bar{\'o}, Francesc and Bertram, Christine and {G{\'o}mez-Baggethun}, Erik and Hansen, Rieke and Kaczorowska, Anna and Kain, Jaan Henrik and Kronenberg, Jakub and Langemeyer, Johannes and Pauleit, Stephan and Rehdanz, Katrin and Schewenius, Maria and Van Ham, Chantal and Wurster, Daniel and Elmqvist, Thomas}, - year = {2016}, - journal = {Ecology and Society}, - volume = {21}, - number = {2}, - publisher = {{and Society}}, - issn = {17083087}, - doi = {10.5751/ES-08445-210229}, - urldate = {2021-04-23}, - abstract = {Understanding the dynamics of urban ecosystem services is a necessary requirement for adequate planning, management, and governance of urban green infrastructure. Through the three-year Urban Biodiversity and Ecosystem Services (URBES) research project, we conducted case study and comparative research on urban biodiversity and ecosystem services across seven cities in Europe and the United States. Reviewing {$>$} 50 peer-reviewed publications from the project, we present and discuss seven key insights that reflect cumulative findings from the project as well as the state-of-the-art knowledge in urban ecosystem services research. The insights from our review indicate that cross-sectoral, multiscale, interdisciplinary research is beginning to provide a solid scientific foundation for applying the ecosystem services framework in urban areas and land management. Our review offers a foundation for seeking novel, nature-based solutions to emerging urban challenges such as wicked environmental change issues.}, - keywords = {Biodiversity,Social-ecological systems,Urban ecology,Urban ecosystem services,Urban green infrastructure,Urban liveability,Urban planning}, - file = {/Users/fabio/Zotero/storage/7KNF62WE/full-text.pdf} -} - -@article{Kriechbaum2021, - title = {Hype Cycles during Socio-Technical Transitions: {{The}} Dynamics of Collective Expectations about Renewable Energy in {{Germany}}}, - author = {Kriechbaum, Michael and Posch, Alfred and Hauswiesner, Angelika}, - year = {2021}, - month = nov, - journal = {Research Policy}, - volume = {50}, - number = {9}, - pages = {104262}, - publisher = {{Elsevier BV}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104262}, - urldate = {2021-07-05}, - abstract = {The literature on socio-technical change describes the widely acknowledged, important roles of collectively shared expectations in shaping the trajectories of novel technologies. However, in previous studies on these technological expectations, researchers have mainly emphasised early innovation stages, paying little attention to technologies that have already begun to challenge and transform the established socio-technical system. In this study, we use the example of the German energy transition to address this gap. By conducting a content analysis of nearly 12,000 newspaper articles, we examined the nature and dynamics of expectations that were circulating in Germany's wider public from 1992 to 2017 regarding wind power, solar photovoltaics, and biogas. Our findings reveal patterns of hype and disillusionment for all three technologies and illustrate the important roles of frame expectations in shaping these hype cycles. Furthermore, the findings shed new light on processes that contribute to the emergence and dynamics of widely shared expectations and indicate that the associated hype patterns are manifestations of unfolding transition dynamics rather than the result of frustrated expectations. In theoretical terms, we integrated insights from (transition) research on discourse and framing into the sociology of expectations, initiating a promising dialogue between scholars in these two fields.}, - keywords = {Climate policy,Discursive struggles,Frames and framing,Sociology of expectations,Sustainability transitions}, - file = {/Users/fabio/Zotero/storage/B5Z5TSGC/full-text.pdf} -} - -@article{Krishna2019, - title = {Universities in the {{National Innovation Systems}}: {{Emerging Innovation Landscapes}} in {{Asia-Pacific}}}, - author = {Krishna, Venni V.}, - year = {2019}, - month = jul, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {3}, - pages = {43}, - issn = {2199-8531}, - doi = {10.3390/joitmc5030043}, - abstract = {Historically, universities and institutions of higher learning have gone through three academic revolutions, namely, teaching, research, and innovation. Universities and Higher Educational Institutions (HEIs) in the last two decades have come to occupy an important part in the national innovation systems (NIS), which is a complex of `all important economic, social, political, organizational, institutional and other factors that influence the development, diffusion and use of innovations'. From a broader perspective, universities, together with public Research and Development (R\&D) labs and science agencies, public policies (on industry, research, innovation and higher education, etc.) and business enterprises are now considered as important actors in the NIS of Asia-Pacific economies. The rise of Asia in the global knowledge-based economy from mid-1990s is closely associated with the rise of knowledge institutions of higher learning and scientific research output. Every Asia-Pacific country embraced and introduced policies relating to innovation in varying forms. Consultancy and collaborative links with industry being traditional forms of engagement, new policy and institutional measures in technology transfer and innovation to engage with society and business enterprises are gaining prominence. Policies for incubation, start-ups, and spin-offs, technology transfer offices (TTOs), and science and technology parks have gained tremendous prominence in leading Asia-Pacific universities. Different national innovation systems in the Asia-Pacific region have given rise to varying roles of universities. Whilst universities in Southeast Asian countries and India continue to play a traditional role of teaching and generating human capital, there are countries such as Singapore, China, Taiwan, and Japan, wherein universities are being transformed as entrepreneurial universities. Science and innovation policies in these countries have orchestrated the goal direction of universities as frontiers of innovation. Universities in Australia and New Zealand have so far been quite successful in marketing higher education to neighboring Asian countries. They have in recent years begun to embark on innovation and commercialization of research. The paper focuses on South East Asia and draws some comparison with more dynamic university ecosystems in East Asia. In doing so, the paper brings into focus the emerging innovation landscapes across the region.} -} - -@article{Krishna2020, - title = {Open {{Science}} and {{Its Enemies}}: {{Challenges}} for a {{Sustainable Science}}\textendash{{Society Social Contract}}}, - author = {Krishna, Venni V.}, - year = {2020}, - month = aug, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {6}, - number = {3}, - pages = {61}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2199-8531}, - doi = {10.3390/joitmc6030061}, - urldate = {2020-08-13}, - abstract = {Science as a social institution has evolved as the most powerful, highly influential, and sought out institution after the conflicts between science and religion following Galileo. Knowledge as a public good, scientific peer review of science, the prominence of open publications, and the emphasis on professional recognition and scientific autonomy have been the hallmark of science in the past three centuries. According to this scientific spirit, the scientific social system and society formed a unique social contract. This social contract drew considerable institutional and state legitimacy for the openness and public good of science in the service of state and society, all through the post-war period. Openness and public good of science are recognized and legitimized by the scientific community and science agencies at the global level. This paradigm of open science, in varying forms and manifestations, contributed to the progress of systematic knowledge at the service of humankind over the last three centuries. Entering the third decade of the 21st century, the social contract between science and society is undergoing major changes. In fact, the whole paradigm of open science and its social contract is being challenged by various ``enemies'' or adversaries such as (a) market-based privatized commercial science, (b) industry 4.0 advanced technologies, and (c) a ``new iron curtain'' on the free flow of science data and information. What is at stake? Are there major changes? Is the very social institution of science transforming? What impact will this have on our contemporary and future sustainable society? These are some important issues that will be addressed in this article.}, - keywords = {ethos of science,industry 4.0,open science,platform capitalism in science,science and society social contract}, - file = {/Users/fabio/Zotero/storage/MELADYWS/full-text.pdf} -} - -@inproceedings{krishnanandFusedFilamentFabrication2021, - title = {Fused {{Filament Fabrication}} ({{FFF}}) {{Based 3D Printer}} and {{Its Design}}: {{A Review}}}, - booktitle = {Lecture {{Notes}} in {{Mechanical Engineering}}}, - author = {{Krishnanand} and Taufik, Mohammad}, - year = {2021}, - pages = {497--505}, - publisher = {{Springer Science and Business Media Deutschland GmbH}}, - issn = {21954364}, - doi = {10.1007/978-981-15-9853-1_41}, - urldate = {2021-06-07}, - abstract = {A digital fabrication technology, which fabricates a part using the 3D CAD model by layer over layer material deposition, is termed as additive manufacturing (AM) or 3D printing. There are various additive manufacturing techniques but the Fused Filament Fabrication (FFF) technique is more popular among them. The popularity of FFF is because of low cost and easy construction of a 3D printer and the availability of various feed materials. In this paper, various applications and materials used in additive manufacturing are discussed. The complete process of 3D printing is discussed along with a detailed discussion of FFF based 3D printing. At the end of the paper, an overview of the design of an FFF based 3D printer is provided.}, - isbn = {9789811598524}, - keywords = {3D printing,Design of 3D printer,FDM,FFF,Fused deposition modeling,Fused filament fabrication} -} - -@article{Kristensen2004, - title = {The {{Physical Context}} of {{Creativity}}}, - author = {Kristensen, Tore}, - year = {2004}, - journal = {Creativity and Innovation Management}, - volume = {13}, - number = {2}, - pages = {89--96}, - issn = {0963-1690}, - doi = {10.1111/j.0963-1690.2004.00297.x}, - abstract = {Creative processes are complex and consist of sub-processes, e.g. value creation, scaffolding, imagination and materialization. Creativity takes place in a physical context, i.e. in a confined space. Such space restricts and enables the free flow of sensory experiences and proximity of other people. The confinements may make certain sensory experiences available, e.g. vision of source material, sight and sound (including noise). This framing allows certain cognitive processes and restricts others. This may induce emotions that, in turn, facilitate or reduce the enhancement of creativity. Physical space affects the well-being of people, the channels of information, the availability of knowledge tools and sets the stage for coherence and continuity, which may contribute to competitive advantages.}, - isbn = {1467-8691} -} - -@article{kristensenIntegratingCircularPrinciples2020, - title = {Integrating Circular Principles in Environmental Management Systems}, - author = {Kristensen, Heidi Simone and Mosgaard, Mette Alberg and Remmen, Arne}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125485}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125485}, - urldate = {2020-12-14} -} - -@article{kroellNearinfraredbasedDeterminationMassbased2023, - title = {Near-Infrared-Based Determination of Mass-Based Material Flow Compositions in Mechanical Recycling of Post-Consumer Plastics: {{Technical}} Feasibility Enables Novel Applications}, - shorttitle = {Near-Infrared-Based Determination of Mass-Based Material Flow Compositions in Mechanical Recycling of Post-Consumer Plastics}, - author = {Kroell, Nils and Chen, Xiaozheng and K{\"u}ppers, Bastian and Lorenzo, Julius and Maghmoumi, Abtin and Schlaak, Matthias and Thor, Eric and Nordmann, Christian and Greiff, Kathrin}, - year = {2023}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {191}, - pages = {106873}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2023.106873}, - urldate = {2023-02-13}, - langid = {english} -} - -@article{kroellSensorbasedParticleMass2021, - title = {Sensor-Based Particle Mass Prediction of Lightweight Packaging Waste Using Machine Learning Algorithms}, - author = {Kroell, Nils and Chen, Xiaozheng and Maghmoumi, Abtin and Koenig, Morgane and Feil, Alexander and Greiff, Kathrin}, - year = {2021}, - month = dec, - journal = {Waste Management}, - volume = {136}, - pages = {253--265}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.10.017}, - urldate = {2021-11-07} -} - -@article{krohSustainAbleUrban2021, - title = {Sustain(Able) Urban (Eco)Systems: {{Stakeholder-related}} Success Factors in Urban Innovation Projects}, - author = {Kroh, Julia}, - year = {2021}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {168}, - pages = {120767}, - publisher = {{Elsevier BV}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120767}, - urldate = {2021-04-29}, - abstract = {Urban areas are centers of financial and industrial activities and social life. Therefore, they are high consumers of resources and energy. Consequently, the relevance of sustainable urban transformation as a mean to counter climate change is increasing. However, because cities are complex and adaptive (eco)systems characterized by constant change, established innovation management approaches are not necessarily compatible with them. Therefore, this study aims to shed light on the underlying mechanisms, innovation barriers, and drivers of urban innovation development in urban ecosystems. It adopts the complex adaptive system perspective that allows an exploratory analysis of intricate stakeholder interactions, being a means to achieve urban transformation. Based on a qualitative content analysis of data obtained through 20 semi-structured interviews, the author shows that urban innovation implementation relies on the interaction between stakeholders in the urban district and from the near and distant urban environment. However, individual, organizational, and ecosystem innovation resistance in the urban district hinder innovation implementation, innovation drivers instead focus on the core of the urban ecosystem. In addition, based on a crisp-set qualitative comparative analysis using data from 33 German urban innovation projects, the author identifies and proffers combinations of specific innovation drivers that result in urban innovation implementation.} -} - -@article{Kropp1989, - title = {Inhalationsszintigraphie Der {{Lunge}} Mit Dem Neuen Ultrafeinen {{Aerosol}} "{{Technegas}}".}, - author = {Kropp, J. and Buhr, W. and Bockisch, A. and Gr{\"u}nwald, F. and Ruhlmann, J. and Hotze, A. and Biersack, H. J.}, - year = {1989}, - journal = {NuklearMedizin}, - volume = {28}, - number = {2}, - pages = {113--120}, - issn = {00295566}, - doi = {10.1055/s-0038-1629471}, - abstract = {Evaporation of 99mTc-pertechnetate at about 2500 degrees C on a carbon surface generates an ultrafine aerosol of labelled carbon clusters. Its particle size of about 2-5 nm enables the aerosol to behave similarly to a gas regarding the ability of penetration. After inhalation, the radioactive particles adhere to the walls of the respiratory bronchioli and alveoli. The high concentration of the radioactivity in the argon carrier gas makes it possible to record a scintigram after a single deep breath. We studied four healthy volunteers and 79 patients including 34 with a tentative diagnosis of pulmonary embolism, 20 with bronchus carcinoma, and 15 with various other lung diseases. Ten of these patients were infants, the youngest being nine months old. All patients also had a perfusion scintigraphy.}, - file = {/Users/fabio/Zotero/storage/IRD3V6DR/Inhalationsszintigraphie der Lunge mit dem neuen ultrafeinen Aerosol Technegas.pdf} -} - -@article{Kruth1991a, - title = {Material {{Incress Manufacturing}} by {{Rapid Prototyping Techniques}}}, - author = {Kruth, J.P.}, - year = {1991}, - journal = {CIRP Annals}, - volume = {40}, - number = {2}, - pages = {603--614}, - issn = {00078506}, - doi = {10.1016/S0007-8506(07)61136-6}, - urldate = {2013-10-08}, - abstract = {SUMMARY The paper gives a state-of-the-art overview of so called rapid prototyping techniques, like stereolithography, selective laser sintering, ballistic particle manufacturing and others. These are new manufacturing techniques in which the part is produced by gradually growing material to the required shape. A tentative classification and nomenclature is proposed. It is shown that those new processes are ideally suited for CIM. The paper tries to compare the different processes and discuss their application and performances.}, - isbn = {0007-8506}, - keywords = {CIM,Manufacturing,Material Incress Manufacturing Rapid Prototyping}, - file = {/Users/fabio/Zotero/storage/ZKL3M789/Kruth - 1991 - Material Incress Manufacturing by Rapid Prototyping Techniques.pdf} -} - -@article{Kruth2005a, - title = {Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting}, - author = {Kruth, J-P. and Mercelis, P. and Van Vaerenbergh, J and Froyen, L. and Rombouts, M.}, - year = {2005}, - month = feb, - journal = {Rapid Prototyping Journal}, - volume = {11}, - number = {1}, - pages = {26--36}, - issn = {1355-2546}, - doi = {10.1108/13552540510573365}, - abstract = {Binding mechanisms in selective laser sintering and selective laser melting}, - isbn = {1355254051}, - file = {/Users/fabio/Zotero/storage/G8DKSB45/Kruth et al. - 2005 - Binding mechanisms in selective laser sintering and selective laser melting.pdf} -} - -@article{Kruth2007, - title = {Consolidation Phenomena in Laser and Powder-Bed Based Layered Manufacturing}, - author = {Kruth, J.-P. and Levy, G. and Klocke, F. and Childs, T.H.C.}, - year = {2007}, - journal = {CIRP Annals}, - volume = {56}, - number = {2}, - pages = {730--759}, - issn = {00078506}, - doi = {10.1016/j.cirp.2007.10.004} -} - -@article{kruthBENCHMARKINGDIFFERENTSLS2005, - title = {{{BENCHMARKING OF DIFFERENT SLS}} / {{SLM PROCESSES AS RAPID MANUFACTURING TECHNIQUES}}}, - author = {Kruth, J and Vandenbroucke, B and Vaerenbergh, J Van and Mercelis, P}, - year = {2005}, - file = {/Users/fabio/Zotero/storage/7M7ZSB4G/BENCHMARKING OF DIFFERENT SLS SLM PROCESSES AS RAPID MANUFACTURING TECHNIQUES.pdf} -} - -@article{Kucherov2017, - title = {Three-{{Dimensional Printing}} with {{Biomass-Derived PEF}} for {{Carbon-Neutral Manufacturing}}}, - author = {Kucherov, Fedor A. and Gordeev, Evgeny G. and Kashin, Alexey S. and Ananikov, Valentine P.}, - year = {2017}, - month = dec, - journal = {Angewandte Chemie International Edition}, - volume = {56}, - number = {50}, - pages = {15931--15935}, - issn = {14337851}, - doi = {10.1002/anie.201708528}, - abstract = {\textcopyright{} 2017 Wiley-VCH Verlag GmbH \& Co. KGaA, Weinheim. Biomass-derived poly(ethylene-2,5-furandicarboxylate) (PEF) has been used for fused deposition modeling (FDM) 3D printing. A complete cycle from cellulose to the printed object has been performed. The printed PEF objects created in the present study show higher chemical resistance than objects printed with commonly available materials (acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), glycol-modified poly(ethylene terephthalate) (PETG)). The studied PEF polymer has shown key advantages for 3D printing: optimal adhesion, thermoplasticity, lack of delamination and low heat shrinkage. The high thermal stability of PEF and relatively low temperature that is necessary for extrusion are optimal for recycling printed objects and minimizing waste. Several successive cycles of 3D printing and recycling were successfully shown. The suggested approach for extending additive manufacturing to carbon-neutral materials opens a new direction in the field of sustainable development.}, - keywords = {biomass,carbon-neutral cycle,polymer chemistry,sustainable chemistry,three-dimensional printing}, - file = {/Users/fabio/Zotero/storage/SZWS4CRP/three-dimensional printing with biomass-derived pef for carbon-neutral manufacturing.pdf} -} - -@article{Kuckertz2019, - title = {Responding to the Greatest Challenges? {{Value}} Creation in Ecological Startups}, - author = {Kuckertz, Andreas and Berger, Elisabeth S.C. and Gaudig, Anja}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {230}, - pages = {1138--1147}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.149}, - file = {/Users/fabio/Zotero/storage/RX3CQ3YX/Responding to the greatest challenges Value creation in ecological startups.pdf} -} - -@article{kuckertzReviewingSystematicLiterature2021, - title = {Reviewing Systematic Literature Reviews: Ten Key Questions and Criteria for Reviewers}, - author = {Kuckertz, Andreas and Block, Joern}, - year = {2021}, - month = jul, - journal = {Management Review Quarterly 2021}, - pages = {1--6}, - publisher = {{Springer}}, - issn = {2198-1639}, - doi = {10.1007/S11301-021-00228-7}, - urldate = {2021-07-15}, - abstract = {Systematic literature review articles are important for synthesizing knowledge in management and business research. However, to date, we lack clear guidelines how to review such articles. This editorial takes the perspective of the reviewer. It presents ten key questions and criteria that reviewers should ask when reviewing systematic literature reviews.}, - keywords = {Accounting/Auditing,Business and Management,general,Innovation/Technology Management,International Business}, - file = {/Users/fabio/Zotero/storage/H5U9F23J/full-text.pdf} -} - -@article{kuclouryaScientometricAnalysisCritical2022, - title = {Scientometric Analysis and Critical Review of Fused Deposition Modeling in the Plastic Recycling Context}, - author = {Kuclourya, Tanay and Monroy, Roberto and {Cuan-Urquizo}, Enrique and {Roman-Flores}, Armando and Ahmad, Rafiq}, - year = {2022}, - month = jul, - journal = {Cleaner Waste Systems}, - volume = {2}, - pages = {100008}, - issn = {2772-9125}, - doi = {10.1016/j.clwas.2022.100008}, - urldate = {2023-02-13}, - abstract = {Plastics have emerged as one of the essential materials present on the planet. However, its accumulation can negatively impact the environment if not disposed of properly. To counter this issue, the `Circular Economy' is one such economic growth model with one of the objectives of using plastic resources efficiently. Several plastic recycling methodologies have been derived, out of which Distributed Recycling via Additive Manufacturing (DRAM) is one of them. The main objective of this study aims to form an optimal link between two different areas of knowledge domains: plastic recycling and additive manufacturing. A scientometric analysis has been conducted to measure the former knowledge domains mentioned to accomplish this goal. From the results, the Scopus database yields 1452 relevant publications between 2013 and 2021. The results suggest that Fused Deposition Modeling (FDM) is the most used AM technology on recycled plastics. Hence, the review targets the FDM process in the context of plastic recycling. A critical review has been done, which shows the material characterization of recycled polymers in AM. This is followed by an in-depth analysis of the FDM technology, including discussions on influencing parameters of this process. The following results present the multi-material mixing of plastics and Direct FDM systems and their relevance in plastic recycling. These two areas create opportunities to increase the variety of feedstock materials that can be 3D printed. Lastly, the authors have proposed some future directions based on the literature review done in this work.}, - langid = {english}, - keywords = {Circular economy,Direct FDM systems,FDM,Multi-material,Plastic,Recycling}, - file = {/Users/fabio/Zotero/storage/D87H5GQJ/Kuclourya et al_2022_Scientometric analysis and critical review of fused deposition modeling in the.pdf;/Users/fabio/Zotero/storage/65BDV58D/S2772912522000082.html} -} - -@article{Kuczenski2013, - title = {{{PET}} Bottle Reverse Logistics\textemdash Environmental Performance of {{California}}'s {{CRV}} Program}, - author = {Kuczenski, Brandon and Geyer, Roland}, - year = {2013}, - month = feb, - journal = {The International Journal of Life Cycle Assessment}, - volume = {18}, - number = {2}, - pages = {456--471}, - issn = {0948-3349}, - doi = {10.1007/s11367-012-0495-7} -} - -@article{kuebartOpenCreativeLabs2021, - title = {Open Creative Labs as Functional Infrastructure for Entrepreneurial Ecosystems: {{Using}} Sequence Analysis to Explore Tempo-Spatial Trajectories of Startups in {{Berlin}}}, - author = {Kuebart, Andreas}, - year = {2021}, - month = dec, - journal = {Research Policy}, - pages = {104444}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104444}, - urldate = {2021-12-10} -} - -@article{Kuehnlein2010, - title = {Degradation Behavior and Material Properties of {{PA12-plastic}} Powders Processed by Powder Based Additive Manufacturing Technologies}, - author = {Kuehnlein, Florian and Drummer, Dietmar and Rietzel, Dominik and Seefried, Andreas}, - year = {2010}, - journal = {Annals of DAAAM and Proceedings of the International DAAAM Symposium}, - volume = {21}, - number = {1}, - pages = {1547--1548}, - issn = {17269679}, - abstract = {Selective mask and laser sintering are powder based, additive manufacturing technologies, which allow the production of complex parts layer-by-layer. Due to the high building chamber temperature during processing, a physical and chemical degradation of the used plastic powder occurs. To reuse the unmolten material and to realize reproducible part properties it is necessary to refresh the partcake powder and establish constant powder properties. In this publication PA12-powders are conditioned in a model experiment at building chamber temperatures for different periods. Process relevant material properties like phase transition temperatures or melt viscosity are analyzed. Also the influence of material pretreatment on resulting material and mechanical part properties by the use of degradatedpowder are investigated.}, - isbn = {9783901509735}, - keywords = {Aging,Article,Degradation,Laser sintering,Mask sintering,Polyamide 12}, - file = {/Users/fabio/Zotero/storage/NUREYKNR/Degradation behavior and material properties of PA12-plastic powders processed by powder based additive manufacturing technologies.pdf} -} - -@article{kuhlmanWhatSustainability2010, - title = {What Is {{Sustainability}}?}, - author = {Kuhlman, Tom and Farrington, John}, - year = {2010}, - month = nov, - journal = {Sustainability 2010, Vol. 2, Pages 3436-3448}, - volume = {2}, - number = {11}, - pages = {3436--3448}, - publisher = {{Molecular Diversity Preservation International}}, - doi = {10.3390/SU2113436}, - urldate = {2021-08-29}, - abstract = {Sustainability as a policy concept has its origin in the Brundtland Report of 1987. That document was concerned with the tension between the aspirations of mankind towards a better life on the one hand and the limitations imposed by nature on the other hand. In the course of time, the concept has been re-interpreted as encompassing three dimensions, namely social, economic and environmental. The paper argues that this change in meaning (a) obscures the real contradiction between the aims of welfare for all and environmental conservation; (b) risks diminishing the importance of the environmental dimension; and (c) separates social from economic aspects, which in reality are one and the same. It is proposed instead to return to the original meaning, where sustainability is concerned with the well-being of future generations and in particular with irreplaceable natural resources\textemdash as opposed to the gratification of present needs which we call well-being. A balance needs to be found between those two, but not by pretending they are three sides of the same coin. Although we use up natural resources at the expense of future generations, we also generate capital (including knowledge) which raises future well-being. A major question is to what extent the one compensates for the other. This debate centres around the problem of substitutability, which has been cast into a distinction between `weak' and `strong' sustainability. It is argued that these two do not need to be in opposition but complement one another.}, - keywords = {being,sustainability,welfare,well}, - file = {/Users/fabio/Zotero/storage/478UTWB4/full-text.pdf} -} - -@article{kuhnParticipatorySystematicMapping2021, - title = {Participatory Systematic Mapping as a Tool to Identify Gaps in Ecosystem Services Research: Insights from a {{Baltic Sea}} Case Study}, - author = {Kuhn, Tinka K. and Oinonen, Soile and Trentlage, Jennifer and Riikonen, Simo and Vikstr{\"o}m, Suvi and Burkhard, Benjamin}, - year = {2021}, - month = apr, - journal = {Ecosystem Services}, - volume = {48}, - pages = {101237}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2020.101237}, - urldate = {2021-04-21}, - abstract = {Evidence-based decision making and policy development rely on the syntheses of available scientific knowledge and the identification of respective knowledge gaps. This article presents a participatory systematic map, which constitutes a relatively new methodological approach in the field of ecosystem services (ES) research. The map identifies, collates, and describes the evidence base on marine and coastal ES research in the Baltic Sea. Key stakeholders were involved throughout the whole mapping process. 1006 publications, identified through searches in eleven databases, were double-screened and 57 publications were found eligible. The results show that research on provisioning, regulating and cultural ES is uniformly distributed in the evidence base while most studies applied bio-physical assessment approaches. The most frequently researched ES are the regulation of nutrients, the provision of fish, and recreation. Only a few studies were conducted in the context of marine policies. While ES research is growing in the Baltic Sea area, this systematic map highlights the plethora of definitions and lack of standardized approaches as an obstacle for policy implementation. The method of participatory systematic mapping was identified as a useful tool for ES research to identify all available knowledge on a specific topic, determine knowledge gaps and inform both researchers and policy makers.}, - keywords = {Coastal-marine management,Decision making,Evidence synthesis,HELCOM region,Literature review,Marine Strategy Framework Directive} -} - -@article{kujalaEffectiveUserInvolvement2008, - title = {Effective User Involvement in Product Development by Improving the Analysis of User Needs}, - author = {Kujala, S.}, - year = {2008}, - month = nov, - journal = {Behaviour and Information Technology}, - volume = {27}, - number = {6}, - pages = {457--473}, - publisher = {{Taylor \& Francis}}, - issn = {0144929X}, - doi = {10.1080/01449290601111051}, - urldate = {2021-06-22}, - abstract = {User involvement has been shown to be beneficial in the development of useful and usable systems. The trend of software development becoming a product-oriented activity creates challenges to user involvement. Field studies appear a promising approach, but the analysis of the gathered user needs has been shown to be demanding. This study presents, on the basis of seven case studies, an early user-involvement process showing how user needs can be analysed and how the input to product development can be identified. In addition, the process is evaluated in two industrial cases with interviews and a questionnaire. The results show that the process supports effective early user involvement; the resulted requirements were evaluated as being more successful and their quality as better than average in a company. However, the case studies show that user involvement not only provides useful information about users' needs but also increases the understanding of users' values.}, - keywords = {Field studies,Product development,Requirements elicitation,User involvement,User need analysis,User-centred design}, - file = {/Users/fabio/Zotero/storage/SMPG43MR/full-text.pdf} -} - -@article{kumamaruImpactChinaImport2021, - title = {The Impact of {{China}}'s Import Ban: {{An}} Economic Surplus Analysis of Markets for Recyclable Plastics}, - author = {Kumamaru, Hirotaka and Takeuchi, Kenji}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {126}, - pages = {360--366}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2021.03.027}, - urldate = {2021-04-29}, - abstract = {Over the years, China has imported a significant quantity of plastic waste from the rest of the world. In December 2017, however, it implemented a ban on the import of plastic waste, used paper, and miscellaneous scrap goods. This study aims to provide new insight on the waste trade, with specific focus on the market for recyclable plastics. By employing an economic surplus analysis, we investigate the impact of China's import ban on the market for recyclable plastics in China and Japan. Obtained results suggest a significant change in economic surpluses; Japan and China's surpluses reduced by 58 billion yen and 1,304 billion yen at the maximum, respectively.}, - pmid = {33813313}, - keywords = {Economic surplus analysis,Import ban,Plastic waste,Waste trade} -} - -@article{Kumar2003, - title = {Selective Laser Sintering: {{A}} Qualitative and Objective Approach}, - author = {Kumar, Sanjay}, - year = {2003}, - journal = {Jom}, - volume = {55}, - number = {10}, - eprint = {1011.1669v3}, - pages = {43--47}, - issn = {1047-4838}, - doi = {10.1007/s11837-003-0175-y}, - abstract = {This article presents an overview of selective laser sintering (SLS) work as reported in various journals and proceedings. Selective laser sintering was first done mainly on polymers and nylon to create prototypes for audio-visual help and fi t-to-form tests. Gradually it was expanded to include metals and alloys to manufacture functional prototypes and develop rapid tooling. The growth gained momentum with the entry of commercial entities such as DTM Corporation and EOS GmbH Electro Optical Systems. Computational modeling has been used to understand the SLS process, optimize the process parameters, and enhance the effi ciency of the sintering machine.}, - archiveprefix = {arxiv}, - isbn = {1047-4838}, - pmid = {25246403}, - file = {/Users/fabio/Zotero/storage/MHDT5796/Kumar - 2003 - Selective laser sintering A qualitative and objective approach.pdf} -} - -@article{Kumar2010, - title = {Composites by Rapid Prototyping Technology}, - author = {Kumar, S. and Kruth, J.-P.}, - year = {2010}, - month = feb, - journal = {Materials \& Design}, - volume = {31}, - number = {2}, - pages = {850--856}, - publisher = {{Elsevier Ltd}}, - issn = {02613069}, - doi = {10.1016/j.matdes.2009.07.045}, - urldate = {2014-07-09}, - keywords = {rapid prototyping,rp}, - file = {/Users/fabio/Zotero/storage/YJLLTG5Z/Kumar, Kruth - 2010 - Composites by rapid prototyping technology.pdf} -} - -@article{Kumar2017, - title = {Development of Filaments Using Selective Laser Sintering Waste Powder}, - author = {Kumar, Sanjay and Czekanski, Aleksander}, - year = {2017}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {165}, - pages = {1188--1196}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.07.202}, - abstract = {Production of polymer waste powders by Selective Laser Sintering (SLS), an Additive Manufacturing (AM) process, is an impediment to its sustainable growth. The purpose of this study is to find proper utilization of these waste powders by developing filaments from these powders for Fused Deposition Modeling (FDM) process. In order to develop filament materials, polyamide powders PA 12 (Nylon material) are mixed with various weight percentages (12.5, 25, 37.5 and 50) of tungsten carbide to enhance mechanical properties. To determine the suitability of powder mixtures for FDM, Differential Scanning Calorimetry (DSC) and Melt flow index (MFI) tests are performed. A single screw extruder is used to process these powder mixtures to form filaments for testing. It is found that the addition of tungsten carbide has increased glass transition temperature, MFI and the strength of resulting polyamide-tungsten carbide composites. Moreover, filaments possess comparable and better strength than existing filaments, which are used to successfully build 3D parts from an FDM system.}, - keywords = {Additive manufacturing,Polymer,Recycling,Sustainability}, - file = {/Users/fabio/Zotero/storage/GTMTZ4BI/development of filaments using selective laser sintering waste powder .pdf} -} - -@article{Kumar2018, - title = {Roadmap to Sustainable Plastic Additive Manufacturing}, - author = {Kumar, Sanjay and Czekanski, Aleksander}, - year = {2018}, - month = jun, - journal = {Materials Today Communications}, - volume = {15}, - number = {March 2017}, - pages = {109--113}, - publisher = {{Elsevier}}, - issn = {23524928}, - doi = {10.1016/j.mtcomm.2018.02.006}, - abstract = {As additive manufacturing (AM) is heading towards mass production and mass customization, the process needs to be environment-friendly and energy-efficient in order to be self-sustainable. Selective laser sintering (SLS) and fused deposition modeling (FDM) are two processes contributing massively towards plastic additive manufacturing. In SLS, the powders that do not contribute to the mass of products become unusable (after some number of reuse) and finally turn into waste. As high energy is required for production of powders, generation of these wastes impacts environment sustainability. A contrivance needs to be developed to convert these waste powders into high-value products to make the process sustainable. FDM has the largest market share in terms of number of AM systems sold and is the most popular for fabricating low-value products. Its usefulness will be further expanded if inexpensive high-value products could be made through this process. In the present work, waste SLS powder is employed to prepare feedstock for inexpensive high-value FDM products, which demonstrates that SLS refuse could be utilized for mass production of FDM feedstock. If two processes (SLS \& FDM) will be connected as proposed here, it will make plastic additive manufacturing energy-efficient, self-sustainable, and will contribute to environment sustainability, in general.}, - keywords = {Additive Manufacturing,Fused Deposition Modeling,Recycling,Selective Laser Sintering,Sustainable Production System}, - file = {/Users/fabio/Zotero/storage/KPXVSHM6/roadmap to sustainable plastic additive manufacturing .pdf} -} - -@article{Kumar2018a, - title = {Extrusion-Based Additive Manufacturing Process for Producing Flexible Parts}, - author = {Kumar, Narendra and Jain, Prashant Kumar and Tandon, Puneet and Pandey, Pulak M.}, - year = {2018}, - journal = {Journal of the Brazilian Society of Mechanical Sciences and Engineering}, - volume = {40}, - number = {3}, - pages = {1--12}, - publisher = {{Springer Berlin Heidelberg}}, - issn = {18063691}, - doi = {10.1007/s40430-018-1068-x}, - abstract = {\textcopyright{} 2018, The Brazilian Society of Mechanical Sciences and Engineering. The processing of elastomers through fused deposition modeling (FDM) is challenging task due to low column strength and high melt viscosity. Ethylene vinyl acetate (EVA) is an elastomer which is widely used for fabricating flexible objects. However, the potential of this material has not been explored in the FDM process. Pre-fabricated EVA filament cannot be processed in standard filament feed extrusion mechanism of commercial FDM machine due to buckling of the filament. However, development of pellet-based extrusion additive manufacturing (AM) may eliminate the issues caused by elastomer filament. The current study demonstrates the development of pellet-based AM system for processing EVA material. The developed system is compatible with the three-axis CNC milling machine, which provides high precision positioning to the deposition path and required power for screw rotation. Details about hardware and software related to the developed system have been presented. Flexible parts using EVA pellets have been fabricated successfully, which shows the capability of the developed extrusion AM system. Experiments have been performed for tuning process parameters. Further, mechanical characterization has been done to analyze the dimensional accuracy, flexibility, strength and hardness of printed parts. Obtained results show that EVA demonstrates approx. 300\textendash 550\% higher elongation as compared to ABS and PLA materials, which indicates EVA can be used to make highly flexible parts. The outcome of this study will be helpful to the engineers for the development of low-cost flexible parts for those applications where customized flexible parts are needed in short span of time.}, - isbn = {0123456789}, - keywords = {Additive manufacturing,Elastomers,Ethylene vinyl acetate,Flexible parts,Fused~Deposition modeling,Pellets}, - file = {/Users/fabio/Zotero/storage/BW46XFL5/Extrusion-based additive manufacturing process for producing flexible parts.pdf} -} - -@article{Kumar2018b, - title = {On the {{3D}} Printing of Recycled {{ABS}}, {{PLA}} and {{HIPS}} Thermoplastics for Structural Applications}, - author = {Kumar, Ranvijay and Singh, Rupinder and Farina, Ilenia}, - year = {2018}, - month = aug, - journal = {PSU Research Review}, - volume = {2}, - number = {2}, - pages = {115--137}, - publisher = {{Emerald}}, - issn = {2399-1747}, - doi = {10.1108/prr-07-2018-0018}, - urldate = {2021-01-15}, - abstract = {Purpose-Three-dimensional printing (3DP) is an established process to print structural parts of metals, ceramic and polymers. Further, multi-material 3DP has the potentials to be a milestone in rapid manufacturing (RM), customized design and structural applications. Being compatible as functionally graded materials in a single structural form, multi-material-based 3D printed parts can be applied in structural applications to get the benefit of modified properties. Design/methodology/approach-The fused deposition modelling (FDM) is one of the established low cost 3DP techniques which can be used for printing functional/ non-functional prototypes in civil engineering applications. Findings-The present study is focused on multi-material printing of primary recycled acrylonitrile butadiene styrene (ABS), polylactic acid (PLA) and high impact polystyrene (HIPS) in composite form. Thermal (glass transition temperature and heat capacity) and mechanical properties (break load, break strength, break elongation, percentage elongation at break and Young's modulus) have been analysed to observe the behaviour of multi-material composites prepared by 3DP. This study also highlights the process parameters optimization of FDM supported with photomicrographs. Originality/value-The present study is focused on multi-material printing of primary recycled ABS, PLA and HIPS in composite form.}, - keywords = {ABS,FDM,Mechanical properties,Multi-material printing,Thermal}, - file = {/Users/fabio/Zotero/storage/CEZJ8QMI/full-text.pdf} -} - -@inproceedings{Kumar2018c, - title = {Experimental Investigations on Suitability of Polypropylene ({{PP}}) and Ethylene Vinyl Acetate ({{EVA}}) in Additive Manufacturing}, - booktitle = {Materials {{Today}}: {{Proceedings}}}, - author = {Kumar, Narendra and Jain, Prashant K and Tandon, Puneet and Mohan Pandey, Pulak}, - year = {2018}, - volume = {5}, - pages = {4118--4127}, - issn = {22147853}, - doi = {10.1016/j.matpr.2017.11.672}, - urldate = {2021-10-04}, - abstract = {The range of materials in the form of the filament is limited for commercial Fused Deposition Modelling (FDM) systems due to the specific requirements of size and shape of the filament. Instead of filament shape, use of pellets as the raw material might be increased the application domain of FDM system, as different types of the thermoplastic pellets are commercially available. Since commercial FDM system deals with filament form material consequently, the modification in the existing system is to be required to process the pellet form materials, which is not an easy task. Therefore, in this paper, suitability analysis of Polypropylene (PP) and Ethylene Vinyl Acetate (EVA) materials have been conducted by customized developednovel Material Deposition Tool (MDT) system.The considered materials have many industrial applications but the potential of these materials has not been explored yet in the commercial additive manufacturing systems. Experiments have been conducted and results show that the selected materials are suitable for the use in the additive manufacturing.}, - keywords = {3D printing,acrylonitrile butadiene styrene,ethylene vinyl acetate,Fused deposition modelling,hybrid manufacturing,milling,polypropylene,screw extrusion}, - file = {/Users/fabio/Zotero/storage/J5TCQ8L3/full-text.pdf} -} - -@article{Kumar2019, - title = {On Investigation of Rheological, Mechanical and Morphological Characteristics of Waste Polymer-Based Feedstock Filament for {{3D}} Printing Applications}, - author = {Kumar, Sudhir and Singh, Rupinder and Singh, {\relax TP} and Batish, Ajay}, - year = {2019}, - month = jun, - journal = {Journal of Thermoplastic Composite Materials}, - pages = {089270571985606}, - issn = {0892-7057}, - doi = {10.1177/0892705719856063}, - keywords = {break strength,HDPE,LDPE,peak strength,porosity,shore D hardness and reinforcement,waste polymer}, - file = {/Users/fabio/Zotero/storage/5MGCUBC4/On investigation of rheological, mechanical and morphological characteristics of waste polymer-based feedstock filament for 3D printing applications.pdf} -} - -@article{Kumar2020, - title = {Behavioral Factors on the Adoption of Sustainable Supply Chain Practices}, - author = {Kumar, Anil and Moktadir, Md Abdul and Khan, Syed Abdul Rehman and {Garza-Reyes}, Jose Arturo and Tyagi, Mrinal and Kazan{\c c}o{\u g}lu, Yi{\u g}it}, - year = {2020}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {158}, - pages = {104818}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104818}, - urldate = {2020-05-08}, - abstract = {Sustainable supply chain management (SSCM) has become a popular research topic among scholars as evidence suggests it has significantly contributed to achieve more environmentally conscious and socially responsible supply chains. Operational excellence (OE), on the other hand, can be achieved by incorporating SSCM practices within existing supply chain operations. However, due to human expertise, involvement and commitment towards excelling at sustainable and operational performance, the effective deployment of SSCM practices now depends on various human-based behavioral factors (BFs). Human behavior is dynamic in nature and hence has an effect on the implementation of SSCM practices. Nevertheless, research on BFs in view of SSCM practices is limited. To fill this knowledge gap, this study examines the nature of BFs for SSCM practices towards OE in supply chains, particularly within the context of the footwear industry of Bangladesh. In the first phase, the BFs were identified and determined through a literature review and empirical investigation. In the second phase, the Hesitant Fuzzy DEMATEL method was used to establish the cause-effect relationships among the factors. The influence of group validation by experts and a literature survey, along with managerial implications, was discussed and explained in the third phase of the study. The results suggest that the factor, `organization culture' is the most influencing behavioral factor, followed by `commitment from higher authority'. Both theoretical and practical contributions of the study are drawn from its findings, helping footwear industry managers to more effectively adopt SSCM practices in the supply chain operations of their organizations to achieve OE.}, - keywords = {Behavioral factor,Footwear industry,Hesitant DEMATEL,Operational excellence,Sustainable supply chain} -} - -@article{Kumar2021, - title = {Impacts of {{Plastic Pollution}} on {{Ecosystem Services}}, {{Sustainable Development Goals}}, and {{Need}} to {{Focus}} on {{Circular Economy}} and {{Policy Interventions}}}, - author = {Kumar, Rakesh and Verma, Anurag and Shome, Arkajyoti and Sinha, Rama and Sinha, Srishti and Jha, Prakash Kumar and Kumar, Ritesh and Kumar, Pawan and {Shubham} and Das, Shreyas and Sharma, Prabhakar and Vara Prasad, P. V.}, - year = {2021}, - month = sep, - journal = {Sustainability}, - volume = {13}, - number = {17}, - pages = {9963}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - doi = {10.3390/su13179963}, - urldate = {2021-09-10}, - abstract = {Plastic pollution is ubiquitous in terrestrial and aquatic ecosystems. Plastic waste exposed to the environment creates problems and is of significant concern for all life forms. Plastic production and accumulation in the natural environment are occurring at an unprecedented rate due to indiscriminate use, inadequate recycling, and deposits in landfills. In 2019, the global production of plastic was at 370 million tons, with only 9\% of it being recycled, 12\% being incinerated, and the remaining left in the environment or landfills. The leakage of plastic wastes into terrestrial and aquatic ecosystems is occurring at an unprecedented rate. The management of plastic waste is a challenging problem for researchers, policymakers, citizens, and other stakeholders. Therefore, here, we summarize the current understanding and concerns of plastics pollution (microplastics or nanoplastics) on natural ecosystems. The overall goal of this review is to provide background assessment on the adverse effects of plastic pollution on natural ecosystems; interlink the management of plastic pollution with sustainable development goals; address the policy initiatives under transdisciplinary approaches through life cycle assessment, circular economy, and sustainability; identify the knowledge gaps; and provide current policy recommendations. Plastic waste management through community involvement and socio-economic inputs in different countries are presented and discussed. Plastic ban policies and public awareness are likely the major mitigation interventions. The need for life cycle assessment and circularity to assess the potential environmental impacts and resources used throughout a plastic product's life span is emphasized. Innovations are needed to reduce, reuse, recycle, and recover plastics and find eco-friendly replacements for plastics. Empowering and educating communities and citizens to act collectively to minimize plastic pollution and use alternative options for plastics must be promoted and enforced. Plastic pollution is a global concern that must be addressed collectively with the utmost priority.}, - keywords = {circular economy,climate change,ecosystem service,life cycle assessment,plastics,policy,sustainable development goals}, - file = {/Users/fabio/Zotero/storage/VYW8JWCM/full-text.pdf} -} - -@article{kumarEffectProcessParameters2018, - title = {The Effect of Process Parameters on Tensile Behavior of {{3D}} Printed Flexible Parts of Ethylene Vinyl Acetate ({{EVA}})}, - author = {Kumar, Narendra and Jain, Prashant K and Tandon, Puneet and Pandey, Mohan}, - year = {2018}, - doi = {10.1016/j.jmapro.2018.08.013}, - urldate = {2021-09-23}, - abstract = {Fused deposition modeling (FDM) is widely accepted AM process due to its capability of fabricating intricate geometries using filament of thermoplastic materials such as ABS, PLA, etc. Due to the limitations of the filament feed extrusion mechanism, existing FDM systems cannot fabricate flexible parts of soft-elastomers. Instead of filament shape, the material in pellet form has a broad scope for 3D printing of flexible parts. Ethylene vinyl acetate (EVA) material is widely used for the fabrication of flexible objects; however, the potential of this material has not been explored yet using the FDM process. In this study, flexible specimens of EVA material have been printed using a customized pellet based FDM system followed by the investigation on the effect of process parameters on tensile behavior. The effect of process parameters namely barrel temperature, platform temperature , build orientation, raster angle and number of contours have been studied on the tensile properties namely, ultimate tensile strength and \% elongation at break. Response surface methodology (RSM) and analysis of variance (ANOVA) techniques have been used to study the effect of process parameters for attaining optimum tensile properties. It was found that barrel temperature, raster angle, and platform temperature affect the tensile behavior of EVA specimens significantly. The maximum obtained values of ultimate tensile strength and elon-gation at break were 8.83 MPa and 522.34\% respectively. The outcome of the current study will help the engineers and designers to predict the tensile behavior of flexible parts for various applications.}, - keywords = {Additive manufacturing 3D printing,Buckling,Elongation,Ethylene vinyl acetate EVA,Flexible parts,Fused deposition modeling,Pellets,Screw extrusion,Tensile strength}, - file = {/Users/fabio/Zotero/storage/RQ633WJT/full-text.pdf} -} - -@article{kumarFrameworkAssessingSocial2022, - title = {A Framework for Assessing Social Acceptability of Industry 4.0 Technologies for the Development of Digital Manufacturing}, - author = {Kumar, Anil and Agrawal, Rohit and Wankhede, Vishal A and Sharma, Manu and {Mulat-weldemeskel}, Eyob}, - year = {2022}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {174}, - pages = {121217}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121217}, - urldate = {2021-09-27} -} - -@article{kumarManagingSupplyChains2021, - title = {Managing Supply Chains for Sustainable Operations in the Era of Industry 4.0 and Circular Economy: {{Analysis}} of Barriers}, - author = {Kumar, Pravin and Singh, Rajesh Kr and Kumar, Vikas}, - year = {2021}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {164}, - pages = {105215}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105215}, - urldate = {2020-10-19}, - abstract = {Organizations are struggling to leverage emerging opportunities for maintaining sustainability in the global markets due to many barriers in the era of Industry 4.0 and circular economy. The main aim of this study is to analyze these barriers to improve the sustainability of a supply chain. Our study identifies the major criteria for sustainable operations and barriers that need to be overcome to achieve the objectives of sustainability through literature review and experts' opinions. An integrated approach comprising Analytic Hierarchy Process (AHP) and Elimination and Choice Expressing Reality (ELECTRE) is used to analyze these barriers and ensure the sustainable supply chain operations. Resource circularity, increasing profits from green products, and designing processes for resource and energy efficiency have been found to be as major sustainability criteria. There are many barriers to the implementation of Industry 4.0. These barriers include but are not limited to, a lack of a skilled workforce that understands Industry 4.0, ineffective legislation and controls, ineffective performance framework, and short-term corporate goals. The study finds that ineffective strategies for the integration of industry 4.0 with sustainability measures, combined with a lack of funds for industry 4.0 initiatives, are just two of the major barriers. The findings of the study will help organizations to develop an effective and integrated strategic approach that will foster sustainable operations through the utilization of improved knowledge of Industry 4.0 and the circular economy.}, - keywords = {AHP,Barriers,Circular economy,ELECTRE,Industry 4.0,Sustainability}, - file = {/Users/fabio/Zotero/storage/MUTUU6SS/full-text.pdf} -} - -@article{kumarMechanicalChemicalBiorecycling2023, - title = {Mechanical, Chemical, and Bio-Recycling of Biodegradable Plastics: {{A}} Review}, - shorttitle = {Mechanical, Chemical, and Bio-Recycling of Biodegradable Plastics}, - author = {Kumar, Ritesh and Sadeghi, Kambiz and Jang, Jaeyoung and Seo, Jongchul}, - year = {2023}, - month = jul, - journal = {Science of The Total Environment}, - volume = {882}, - pages = {163446}, - issn = {00489697}, - doi = {10.1016/j.scitotenv.2023.163446}, - urldate = {2023-08-21}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/L8JENJ3Q/Kumar et al. - 2023 - Mechanical, chemical, and bio-recycling of biodegr.pdf} -} - -@article{kumdokrubCornellUniversityCampus2023, - title = {Cornell University Campus Metabolism and Circular Economy Using a Living Laboratory Approach to Study Major Resource and Material Flows}, - author = {Kumdokrub, Tikumporn and Carson, Sarah and You, Fengqi}, - year = {2023}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {421}, - pages = {138469}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.138469}, - urldate = {2023-08-31}, - abstract = {Urban metabolism (UM) resembles the metabolism of living organisms in a community context by consuming necessities and excreting waste. Exercising UM with a circular economy concept enhances sustainable practices by circulating energy and materials, minimizing and closing waste loops to push a system for a net-zero goal. This research tracks energy and material flows in the energy, food waste, and construction materials sectors of Cornell University, Ithaca, NY, serving as a case study for campus metabolism. These three sectors are the top emitters and are interconnected at the food-water-energy nexus in terms of emissions. In addition to the flow analysis, the study includes environmental and economic evaluations of the proposed digestate composting and estimation of embodied emissions for construction material building stocks. The results suggest that Cornell needs to transition from natural gas to geothermal for a rapid shift towards renewable energy and to increase circularity within the sector. Regarding food waste, the proposed digestate composting reduces emissions by 16\textendash 39 metric tons of CO2e with a financial gain of US\$90~k to US\$400~k per fiscal year compared to the traditional food waste composting practice. Lastly, the proportional evaluation between operational emissions from the energy sector and embodied emissions from stored building materials shows a decreasing trend in the contribution of operational emissions from 46.42\% to 26.86\% in 2008 and 2021, respectively. This result highlights the immediate need for Cornell's construction waste management to prevent future emissions of embodied carbon into the environment. The campus metabolism study advances our understanding of potential energy and material flows, along with emissions offsets, among the three sectors to achieve the goal of decarbonization. This study can unlock sustainability pathways and accelerate Cornell's progress toward carbon neutrality by 2035.}, - keywords = {Circular economy,Construction materials,Energy,Food waste,Food-water-energy nexus,Living laboratory,Urban metabolism}, - file = {/Users/fabio/Zotero/storage/2J8TCFHY/S0959652623026276.html} -} - -@article{Kummitha2019, - title = {Smart Cities and Entrepreneurship: {{An}} Agenda for Future Research}, - author = {Kummitha, Rama Krishna Reddy}, - year = {2019}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {149}, - pages = {119763}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119763} -} - -@article{kumpChallengesMaintainingDiffusing2021, - title = {Challenges of Maintaining and Diffusing Grassroots Innovations in Alternative Food Networks: {{A}} Systems Thinking Approach}, - author = {Kump, Barbara and Fikar, Christian}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {317}, - pages = {128407}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128407}, - urldate = {2021-08-23}, - abstract = {Sustainability transitions of food systems are at the core of several of the United Nations' Sustainable Development Goals (SDGs). In many regions, grassroots initiatives (i.e., community-led bottom-up initiatives) have emerged to experiment with alternative food networks and change the dominant food regimes. While grassroots initiatives can play a crucial role in sustainability transitions, it is known that actors usually face challenges related to (1) building and maintaining an initiative, and (2) diffusing it to the mainstream. However, the systemic mechanisms underlying these two types of challenges in food systems are still underspecified. Building on previous empirical research, the paper uses systems thinking (qualitative causal loop diagrams) to detail (1) the systemic mechanisms underlying the emergence and maintenance of an alternative food network; and (2) the feedback loops related to organizational and logistics issues that pose limits to scaling. It explains the paradox of diffusion in alternative food networks and concludes that diffusion of alternative food networks to mainstream may be achieved through replication and translation strategies, rather than scaling-up.}, - file = {/Users/fabio/Zotero/storage/WQZ96TAW/full-text.pdf} -} - -@article{kundurpiNavigatingAdaptationTransformation2020, - title = {Navigating between Adaptation and Transformation: {{How}} Intermediaries Support Businesses in Sustainability Transitions}, - author = {Kundurpi, Aravind and Westman, Linda and Luederitz, Christopher and Burch, Sarah and Mercado, Alexander}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {283}, - pages = {125366}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125366}, - urldate = {2020-12-14} -} - -@article{kuoCircularEconomySystem2021, - title = {Toward a Circular Economy: {{A}} System Dynamic Model of Recycling Framework for Aseptic Paper Packaging Waste in {{Indonesia}}}, - author = {Kuo, Tsai-Chi and Hsu, Ni-Ying and Wattimena, Reza and Hong, I-Hsuan and Chao, Chin-Jung and Herlianto, Jonathan}, - year = {2021}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {301}, - pages = {126901}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126901}, - urldate = {2021-04-29}, - abstract = {In a circular economy, extended producer responsibility (EPR) is a regulatory approach that accounts for all environmental costs associated with a product throughout its life cycle. When considering the EPR, the regulator must (1) design an integrated framework for different stakeholders and (2) provide effective policies to create financial incentives to accelerate the circular system. Recycling funds and subsidies are the most prominent financial strategies that can either encourage or curtail the flows of recycled products. In Indonesia, a few companies provided recycling bonus s to their customers as incentives to increase the recycling rate. However, the recycling rate was not as effective as expected by the enterprise because recycling was practiced by a limited number of companies, rendering it economically unviable. The enterprises hope the government could develop a recycling fund system. In order to develop the recycling fund system, a system dynamic model was proposed and simulated to optimize the recycling funds and subsidies based on decentralized reverse supply chains. Although it is not a novelty model; however, the research show a very significant results for the government in Indonesia. This enabled a more precise, well-planned, and sustainable decision-making process for the EPR. In addition, by utilizing the system dynamic model with different scenarios in a real case study (aseptic paper packaging waste), we found that the capacity of the recycler could become the reference for the funds to be paid by the importer-producer group, wherein the recycling rate will increase with an increase in the recycling fund.} -} - -@article{Kurisu2011, - title = {Comparison of Waste Prevention Behaviors among Three {{Japanese}} Megacity Regions in the Context of Local Measures and Socio-Demographics}, - author = {Kurisu, Kiyo H. and Bortoleto, Ana Paula}, - year = {2011}, - month = jul, - journal = {Waste Management}, - volume = {31}, - number = {7}, - pages = {1441--1449}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2011.03.008} -} - -@article{Kurisu2019, - title = {Expression Effects of Public Service Advertisements on Intentions to Act for Global Warming}, - author = {Kurisu, Kiyo and Kimura, Naoki and Hanaki, Keisuke}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {218}, - pages = {1045--1054}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.059} -} - -@article{kurniawanCurrentStateMarine2020, - title = {Current {{State}} of {{Marine Plastic Pollution}} and Its {{Technology}} for {{More Eminent Evidence}}: {{A Review}}}, - author = {Kurniawan, Setyo Budi and Sheikh Abdullah, Siti Rozaimah and Imron, Muhammad Fauzul and Ismail, Nur `Izzati}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - number = {1}, - pages = {123537}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123537}, - urldate = {2020-08-13}, - abstract = {There is no doubt that plastic is polluting the environment. Much terrifying evidence has been provided to show how great the impact of plastic on the living environment has become. Some regions around the world have taken a lead in establishing regulation to combat further plastic pollution. But still, more eminent evidences are required to increase the awareness about this major global problem. This paper presents an intensive discussion related to the evidence of plastic pollution in the environment, some established policies and regulations about plastic pollution and the technology in providing and revealing more evidence of plastic pollution. Current technologies in plastic particles identification and the limitation of widely used technologies are comprehensively elaborated. In addition, a feasible and reliable technique of sequential separation through salt solutions to identify plastic type is discussed in this review paper. This paper also provides future approaches in the effort to increase awareness of current global plastic pollution.} -} - -@article{kurniawanUnlockingDigitalTechnologies2022, - title = {Unlocking Digital Technologies for Waste Recycling in {{Industry}} 4.0 Era: {{A}} Transformation towards a Digitalization-Based Circular Economy in {{Indonesia}}}, - author = {Kurniawan, Tonni Agustiono and Dzarfan Othman, Mohd Hafiz and Hwang, Goh Hui and Gikas, Petros}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {357}, - pages = {131911}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2022.131911}, - urldate = {2022-05-23}, - abstract = {The overgeneration of non-biodegradable waste in Indonesia requires empty lands for landfilling, which contravenes with the landscape of sustainable cities. As local landfills have become overburdened, the solid waste is disposed of in uncontrolled manners that seriously affect public health and the environment. To address this problem, Indonesian gradually moves towards digitalization for waste recycling. To reflect its novelty, this work investigates how to add economic value to recycled waste using digital technology and how economic incentives can be promoted to avoid generating waste. The roles and implications of digitalization on resource recovery are elaborated from Cleaner Production perspectives. As a driving force of social innovation, it was found that the digital transformation of waste industry encouraged community in Yogyakarta to sell waste online via Rapel app installed in their smartphones. On average, customers sell their waste nearly 15 kg per transaction and earn USD 0.1/kg as a point balance. When their waste ranges from 15 to 20 kg, the sellers get USD 1.4. Recovering polyethylene (PET) bottles via a mixed-recyclables could yield about USD 150\textendash 300/Mt, while a bottle-only collection ranges from USD 360 to 590/Mt. As the implications of this study, digitalization has created new jobs (780 waste collectors) in Yogyakarta (@20 persons/subdistrict). Digitalization in waste management also promotes waste avoidance up to 65\%. Potential monthly turnover from the waste recycling's transaction through the app is about USD 2,000/waste bank. Overall, the findings imply that the digital transformation in the waste sector not only promotes the resource recovery of non-biodegradable waste for a circular economy, but also enables local community to do online transactions of recycled goods through mobile-based applications. By moving towards digitalization, it is projected that the country's waste recycling industry would create over 120,000 new jobs and absorb about 3.3 million informal workers such as waste collectors.}, - keywords = {Circular economy,Cleaner production,Digitalization,Resource recovery,Zero-waste} -} - -@article{kurtzLifetimeOrganizationsFramework2021, - title = {Beyond the Lifetime of Organizations: {{A}} Framework for Multi-Generational Goal Survival in the Ecology of Goals}, - author = {Kurtz, Samuel A.}, - year = {2021}, - month = mar, - journal = {Futures}, - volume = {127}, - pages = {102699}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102699}, - urldate = {2021-02-14}, - abstract = {The completion of initiatives designed to address wicked problems often requires the participation of a variety of actors spanning multiple generations of both individuals and organizations. Until now, frameworks for addressing problems and articulating the sustainability of goals related to overcoming them have yet to adequately account for the timespans required for addressing such problems; particularly as far as the lifecycle of organizations is shorter than such timespans. Here, a framework is presented to articulate the survival of goals to the point of initiative completion under conditions in which it is not assumed that any individual organization or subunit exists long enough to fulfill the requirements for completing such initiatives.}, - keywords = {Existential threat,Goal ecology,Organizational lifecycle,Organizational theory,Time horizon} -} - -@article{kusenbergOpportunitiesChallengesApplication2022, - title = {Opportunities and Challenges for the Application of Post-Consumer Plastic Waste Pyrolysis Oils as Steam Cracker Feedstocks: {{To}} Decontaminate or Not to Decontaminate?}, - author = {Kusenberg, Marvin and Eschenbacher, Andreas and Djokic, Marko R. and Zayoud, Azd and Ragaert, Kim and De Meester, Steven and Van Geem, Kevin M.}, - year = {2022}, - month = feb, - journal = {Waste Management}, - volume = {138}, - pages = {83--115}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.11.009}, - urldate = {2021-12-10} -} - -@article{Kusiak2007, - title = {Innovation: {{The}} Living Laboratory Perspective}, - author = {Kusiak, Andrew}, - year = {2007}, - journal = {Computer-Aided Design and Applications}, - volume = {4}, - number = {1-6}, - pages = {863--876}, - issn = {16864360}, - doi = {10.1080/16864360.2007.10738518}, - abstract = {Innovation research is highly interdisciplinary and has attracted numerous science and practice communities. Though innovation results are broadly applicable, this paper focuses on engineering and service domains. The two are tightly interrelated, as the benefits of product innovation are realized through the business activities, and certain business undertakings may impact the product design innovation. A requirements-driven approach to innovation is proposed. It is a natural extension of the system of customer requirements in terms of their number and type and the expanded ways of collecting and processing them. The proposed approach is implemented as the Living Innovation Laboratory. Keywords:}, - keywords = {Data-driven innovation,Innovation,Requirements-driven innovation}, - file = {/Users/fabio/Zotero/storage/CALQ8TQ7/Innovation The living laboratory perspective.pdf} -} - -@article{Kuzma2020, - title = {The Relationship between Innovation and Sustainability: {{A}} Meta-Analytic Study}, - author = {Kuzma, Edson and Padilha, Luccas Santin and Sehnem, Simone and Julkovski, Dulcimar Jos{\'e} and Roman, Darlan Jos{\'e}}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {259}, - pages = {120745}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120745}, - urldate = {2020-03-15} -} - -@article{Kuzmina2018, - title = {Future Scenarios for {{Fast-Moving Consumer Goods}} in a Circular Economy}, - author = {Kuzmina, Ksenija and Prendeville, Sharon and Walker, Dale and Charnley, Fiona}, - year = {2018}, - month = dec, - journal = {Futures}, - issn = {00163287}, - doi = {10.1016/j.futures.2018.12.001}, - abstract = {The aim of the study is to envision, through an inductive scenario planning methodology, future scenarios of the fast-moving consumer goods (FMCG) industry in the context of a circular economy (CE). The study uses an exploratory scenario planning, an inductive approach to engage FMCG industry organisations, CE experts, end-users, and academic stakeholders in exploring the future of FMCG within a CE context. Five future scenarios that can inform a vision for the future of the FMCG industry were developed: (1) Rinse and Reuse, (2) The Cycling of Pure Materials, (3) The Rise of the Circular Retailer, (4) A World Without Supermarkets and (5) Connected Living. The analysis and discussion of the scenarios consider how value is created within circular economy and the integral role that the consumer and the IT play within it. The study provides insights on how the FMCG sector might participate in the CE and in doing so provides a basis for further research in this area. Future areas for research are outlined.}, - file = {/Users/fabio/Zotero/storage/J6WHJMQA/Future scenarios for fast-moving consumer goods in a circular economy.pdf} -} - -@article{Kuznetsov2010a, - title = {Rise of the Expert Amateur: {{DIY}} Projects, Communities, and Cultures}, - author = {Kuznetsov, Stacey and Paulos, Eric}, - year = {2010}, - journal = {NordiCHI 2010: Extending Boundaries - Proceedings of the 6th Nordic Conference on Human-Computer Interaction}, - number = {Figure 1}, - pages = {295--304}, - doi = {10.1145/1868914.1868950}, - abstract = {This paper presents a large-scale study of Do-It-Yourself (DIY) communities, cultures and projects. We focus on the adoption and appropriation of human-computer interaction and collaboration technologies and their role in motivating and sustaining communities of builders, crafters and makers. Our survey of over 2600 individuals across a range of DIY communities (Instructables, Dorkbot, Craftster, Ravelry, Etsy, and Adafruit) reveals a unique set of values, emphasizing open sharing, learning, and creativity over profit and social capital. We derive design implications to embed these values into other everyday practices, and hope that our work serves to engage CHI practitioners with DIY expert amateurs. \textcopyright{} 2010 ACM.}, - isbn = {9781605589343}, - keywords = {DIY,Motivations of contributors,Online communities}, - file = {/Users/fabio/Zotero/storage/FF327K47/Rise of the Expert Amateur.pdf} -} - -@article{Kuznetsov2018, - title = {Strength of {{PLA Components Fabricated}} with {{Fused Deposition Technology Using}} a {{Desktop 3D Printer}} as a {{Function}} of {{Geometrical Parameters}} of the {{Process}}}, - author = {Kuznetsov, Vladimir and Solonin, Alexey and Urzhumtsev, Oleg and Schilling, Richard and Tavitov, Azamat}, - year = {2018}, - month = mar, - journal = {Polymers}, - volume = {10}, - number = {3}, - pages = {313}, - issn = {2073-4360}, - doi = {10.3390/polym10030313}, - abstract = {The current paper studies the influence of geometrical parameters of the fused deposition modeling (FDM)-fused filament fabrication (FFF) 3D printing process on printed part strength for open source desktop 3D printers and the most popular material used for that purpose-i.e., polylactic acid (PLA). The study was conducted using a set of different nozzles (0.4, 0.6, and 0.8 mm) and a range of layer heights from the minimum to maximum physical limits of the machine. To assess print strength, a novel assessment method is proposed. A tubular sample is loaded in the weakest direction (across layers) in a three-point bending fixture. Mesostructure evaluation through scanning electronic microscopy (SEM) scans of the samples was used to explain the obtained results. We detected a significant influence of geometric process parameters on sample mesostructure, and consequently, on sample strength.}, - keywords = {Additive manufacturing,Anisotropy,Desktop 3D printing,Digital fabrication,Fused deposition modeling,Fused filament fabrication,Interlayer bonds,Mechanical strength,Polylactic acid}, - file = {/Users/fabio/Zotero/storage/AVVH7ZIX/Strength of PLA Components Fabricated with Fused Deposition Technology Using a Desktop 3D Printer as a Function of Geometrical Parameters of the Process.pdf} -} - -@article{Kwon2019, - title = {Anticipating Technology-Driven Industry Convergence: Evidence from Large-Scale Patent Analysis}, - author = {Kwon, Ohjin and An, Yoonjung and Kim, Myeongjung and Lee, Changyong}, - year = {2019}, - month = aug, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--16}, - issn = {0953-7325}, - doi = {10.1080/09537325.2019.1661374} -} - -@article{Kwon2019a, - title = {Research Addressing Emerging Technological Ideas Has Greater Scientific Impact}, - author = {Kwon, Seokbeom and Liu, Xiaoyu and Porter, Alan L. and Youtie, Jan}, - year = {2019}, - month = nov, - journal = {Research Policy}, - volume = {48}, - number = {9}, - pages = {103834}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103834}, - urldate = {2020-05-10}, - abstract = {This study empirically examines the association between the extent of emerging technological ideas in a scientific publication and its future scientific impact measured by number of citations. We analyze metadata of scientific publications in three scientific domains: Nano-Enabled Drug Delivery, Synthetic Biology, and Autonomous Vehicles. By employing a bibliometric indicator for identifying and quantifying emerging technological ideas \textendash{} as derived terms from the titles and abstracts \textendash{} we measure the extent to which the publication contains emerging technological ideas in each domain. Then, we statistically estimate the size and statistical significance of the relationship between the publication-level technological emergence score and the normalized number of citations accruing to the publication. Our analysis shows that the degree to which a paper contains technologically emerging ideas is positively and strongly associated with its future citation impact in each of the three domains. An additional analysis demonstrates that this relationship holds for citations from other publications, both in the same field as, and in different fields from, the scientific domain of the focal publication. A series of tests for validation further support our argument that the greater the extent to which scientific knowledge (a paper) contains emerging ideas, the bigger its scientific impact. Implications for academic researchers, research policymakers, and firms are discussed.}, - keywords = {Bibliometrics,Citation impact,Emergence score,Emerging technology} -} - -@misc{labPeristalticPump, - title = {Peristaltic {{Pump}}}, - author = {Lab, Garagem Fab}, - journal = {Instructables}, - urldate = {2022-11-23}, - abstract = {Peristaltic Pump: This project was inspired by the Waag Society's Biohack Academy: https://biohackacademy.github.io/ https://github.com/biohackacademy One of the Biohack Academy's components is a peristaltic pump. This Instructable builds on the model provided by add\ldots}, - howpublished = {https://www.instructables.com/Peristaltic-Pump/}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/TFIQFA8M/Peristaltic-Pump.html} -} - -@article{LaCarrubba2008, - title = {{{PLLA}}/{{PLA}} Scaffolds Prepared via {{Thermally Induced Phase Separation}} ({{TIPS}}): Tuning of Properties and Biodegradability}, - author = {La Carrubba, V. and Pavia, F. Carf{\`i} and Brucato, V. and Piccarolo, S.}, - year = {2008}, - month = apr, - journal = {International Journal of Material Forming}, - volume = {1}, - number = {S1}, - pages = {619--622}, - issn = {1960-6206}, - doi = {10.1007/s12289-008-0332-5}, - urldate = {2014-07-23}, - keywords = {agents such as,allowing extracellular matrix,ecm,enzymes,mainly mediated by biological,pla blends,plla,scaffold,scaffolds should be biodegradable,tips,tissue engineering,to occupy the}, - file = {/Users/fabio/Zotero/storage/UNLU6EZI/La Carrubba et al. - 2008 - PLLAPLA scaffolds prepared via Thermally Induced Phase Separation (TIPS) tuning of properties and biodegrada.pdf} -} - -@article{lacroixMultipleVisionsFuture2019, - ids = {lacroix2019}, - title = {Multiple Visions of the Future and Major Environmental Scenarios}, - author = {Lacroix, Denis and Laurent, Louis and {de Menthi{\`e}re}, Nicolas and Schmitt, Bertrand and B{\'e}thinger, Audrey and David, Bernard and Didier, Christophe and {Parent du Ch{\^a}telet}, Jacques}, - year = {2019}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {144}, - pages = {93--102}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.03.017}, - urldate = {2020-06-07}, - abstract = {Scientific programming in environmental science often relies on short-term (3 to 5 years) trend-based projections for contextual elements like the demography or the economy to construct or justify its choice of priorities. However, this approach does not take into account numerous factors of change or disruption over a longer term (10 to 20, or even 50 years), although a decade or two are needed to effectively deal with the stakes of research. These stakes become more acute over the long term, as consequences of predicted changes (e. g. climate) or other factors such as pollution, biodiversity erosion, reduction of ecosystemic services... This complex question justifies turning to a foresight approach. Because it enables tipping points to be envisaged for some key variables of the system studied (in this case, the environment), the scenario method seems well adapted to proposing several contrasting visions of the future. The research question is: how a large screening of international studies on environmental scenarios can help framing the reflection on research priorities about environment? To help take its strategic reflection forward, in June 2015 the French national research alliance for the environment (AllEnvi) commissioned its transversal foresight group to identify the major families of scenarios described in foresight studies dealing with the environment since 2000. The summary of the 307 scenarios produced by analyzing 99 international studies highlighted 11 possible societal and environmental pathways. Analyzing these families of scenarios thus makes it easier to clarify the multiple roles that science can play, according to contrasting dynamics. Consequently, this study shows how a systematic review of foresight studies and their related visions of the future of environment can stimulate and enlighten the reflection on the ways societies can (re)define their future, by combining environmental, governance and social sciences..}, - keywords = {2100,Environment,Foresight,Research programming,Scenarios}, - file = {/Users/fabio/Zotero/storage/9X2B8PYF/full-text.pdf} -} - -@article{ladhariComparisonPropertiesRelevance2021, - title = {Comparison of {{Properties}} with {{Relevance}} for the {{Automotive Sector}} in {{Mechanically Recycled}} and {{Virgin Polypropylene}}}, - author = {Ladhari, Abdelhak and Kucukpinar, Esra and Stoll, Henning and S{\"a}ngerlaub, Sven and Paolo, Francesco and Mantia, La and Castellani, Beatrice}, - year = {2021}, - month = nov, - journal = {Recycling 2021, Vol. 6, Page 76}, - volume = {6}, - number = {4}, - pages = {76}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - doi = {10.3390/RECYCLING6040076}, - urldate = {2021-11-30}, - abstract = {Polypropylene (PP) has a high recycling potential. However, the properties of mechanically recycled PP (R-PP) have not been fully compared to those of virgin PP (V-PP). Therefore, in this study, properties of R-PP and V-PP were compared using data from recyclers, virgin plastic suppliers, and the literature. The properties of recyclates could not be directly correlated either with the properties of the virgin polymers from which the recyclates were made or the recycling parameters. It was found that the MFR of R-PP was higher; MFR R-PP had a median value (m) of 11 g/10 min while MFR V-PP had a median value of 6.3 g/10 min (at 230 \°C and with 2.16 kg). In terms of mechanical properties, in many cases R-PP exhibited stiffer and more brittle behavior, with a slightly higher Young\’s modulus (ER-PP = 1400 and EV-PP = 1200 MPa), a reduced elongation at break (\&\#603;bR-PP = 4 l.-\% and \&\#603;bV-PP = 83 l.-\%), and notched charpy impact strength (NCISR-PP = 4.8 and NCISV-PP = 7.5 kJ/m2). However, the values for every property had a broad distribution. In addition to existing information from the literature, our research sheds fresh light on the variation of the characteristics of recycled polypropylenes presently on the market.}, - keywords = {automotive,mechanical properties,polypropylene,polypropylene recyclates,recycling,rheological properties}, - file = {/Users/fabio/Zotero/storage/6GHLHVVD/full-text.pdf} -} - -@article{lahaneInvestigatingSustainableDevelopment2022, - title = {Investigating the Sustainable Development Goals Derived Due to Adoption of Circular Economy Practices}, - author = {Lahane, Swapnil and Kant, Ravi}, - year = {2022}, - month = apr, - journal = {Waste Management}, - volume = {143}, - pages = {1--14}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.02.016}, - urldate = {2022-03-13}, - abstract = {Recently, the novel concept of the circular supply chain (CSC) has gained substantial attention amongst researchers across the globe. It is due to the issues of unsustainability in supply chain operation of manufacturing industry. CSC amalgamates the circular economy (CE) into the supply chain of manufacturing organizations. Business organizations can achieve several sustainable development goals by adopting CSC as an innovative strategy. However, limited attention has been given to its implementation in emerging economies. Thus, this research aim is to identify and analyze the essential CE practices that help to accomplish the several sustainable development goals (SDGs) of CSC management. This research presents an integrated framework of Pythagorean fuzzy analytic hierarchy process (PF-AHP) and Pythagorean fuzzy combinative distance-based assessment (PF-CODAS) techniques. PF-AHP is employed to determine the relative importance of CE practices, whereas PF-CODAS method ranks the SDGs derived due to the adoption of CE practices. The effectiveness of the proposed framework is validated with the help of an Indian manufacturing organization. The finding of this research reveals that practices based on 'government', 'management', and 'economy' initiatives play a significant role and contribute 50 \% of its influence on the effective CSC adoption, whereas, 'mitigate waste and enhance environmental sustainability', is identified as the most critical SDG realized due to adoption of CE practices. Sensitivity analysis is conducted to check the robustness of proposed methods. This research provides the systematic, accurate, and valuable decision support tools to practitioners to execute the CE practices efficiently for achieving the various sustainability goals.} -} - -@article{lahcenModellingCircularEconomy2022, - title = {Modelling the Circular Economy: {{Introducing}} a Supply Chain Equilibrium Approach}, - author = {Lahcen, Bart and Eyckmans, Johan and Rousseau, Sandra and Dams, Yoko and Brusselaers, Jan}, - year = {2022}, - month = jul, - journal = {Ecological Economics}, - volume = {197}, - pages = {107451}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2022.107451}, - urldate = {2022-05-23} -} - -@article{Laibach2019, - title = {Exploring the Future of the Bioeconomy: {{An}} Expert-Based Scoping Study Examining Key Enabling Technology Fields with Potential to Foster the Transition toward a Bio-Based Economy}, - author = {Laibach, Natalie and B{\"o}rner, Jan and Br{\"o}ring, Stefanie}, - year = {2019}, - month = mar, - journal = {Technology in Society}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.03.001}, - file = {/Users/fabio/Zotero/storage/JJMNMQP5/Exploring the future of the bioeconomy- An expert-based scoping study examining key enabling technology fields with potential to foster the transition toward a bio-based economy.pdf} -} - -@article{laineHowReconcileActual2023, - title = {How to Reconcile Actual Climate Change Mitigation with Prosperity? {{A}} Proposal}, - shorttitle = {How to Reconcile Actual Climate Change Mitigation with Prosperity?}, - author = {Lain{\'e}, Michael}, - year = {2023}, - month = feb, - journal = {Ecological Economics}, - volume = {204}, - pages = {107679}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2022.107679}, - urldate = {2022-12-12}, - abstract = {Rephrasing Keynes, we could say we are capable of irreversibly warming the planet because it does not pay a dividend. The aim of this article is to propose a novel policy to decouple the economic system from greenhouse gas emissions by legally redefining the way dividends are computed, thus changing corporations' main objective. The basic idea is to make the pursuit of self-interest by shareholders compatible with the common good, i.e. actual climate change mitigation. In order to distribute income to their shareholders, corporations should curb their greenhouse gas emissions. Such income should be proportional to the companies' achievements, providing a powerful incentive to change production and delivery schemes. Although it implies that the system would no longer revolve around the accumulation of profits, shareholders' income would also depend on economic prosperity and less unequal distribution of resources. Profits would have a secondary role to play, only to the extent of avoiding bankruptcy in the long run. This novel policy, that we propose to call ``climatism'', as opposed to ``capitalism'', could be a way to move towards a post-growth or wellbeing economy.}, - langid = {english}, - keywords = {Climate change,Climatism,Dividends,Post-growth}, - file = {/Users/fabio/Zotero/storage/WN7VF5Q6/Lainé_2023_How to reconcile actual climate change mitigation with prosperity.pdf;/Users/fabio/Zotero/storage/N4PRPZFK/S0921800922003408.html} -} - -@article{laitalaIncreasingRepairHousehold2020, - title = {Increasing Repair of Household Appliances, Mobile Phones and Clothing: {{Experiences}} from Consumers and the Repair Industry}, - author = {Laitala, Kirsi and Klepp, Ingun Grimstad and Haugr{\o}nning, Vilde and {Throne-Holst}, Harald and Strandbakken, P{\aa}l}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {282}, - pages = {125349}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125349}, - urldate = {2020-12-14}, - file = {/Users/fabio/Zotero/storage/RQNKTGJ5/full-text.pdf} -} - -@article{Lajeunesse2016, - title = {Facilitating Systematic Reviews, Data Extraction and Meta-Analysis with the Metagear Package for {{R}}}, - author = {Lajeunesse, Marc J.}, - year = {2016}, - journal = {Methods in Ecology and Evolution}, - volume = {7}, - number = {3}, - pages = {323--330}, - issn = {2041210X}, - doi = {10.1111/2041-210X.12472}, - abstract = {* The r package ecosystem is rich in tools for the statistics of meta-analysis. However, there are few resources available to facilitate research synthesis as a whole. * Here, I present the metagear package for r. It is a comprehensive, multifunctional toolbox with capabilities aimed to cover much of the research synthesis taxonomy: from applying a systematic review approach to objectively assemble and screen the literature, to extracting data from studies, and to finally summarize and analyse these data with the statistics of meta-analysis. * Current functionalities of metagear include the following: an abstract screener GUI to efficiently sieve bibliographic information from large numbers of candidate studies; tools to assign screening effort across multiple collaborators/reviewers and to assess inter-reviewer reliability using kappa statistics; PDF downloader to automate the retrieval of journal articles from online data bases; automated data extractions from scatter-plots, box-plots and bar-plots; PRISMA flow diagrams; simple imputation tools to fill gaps in incomplete or missing study parameters; generation of random-effects sizes for Hedges' d, log response ratio, odds ratio and correlation coefficients for Monte Carlo experiments; covariance equations for modelling dependencies among multiple effect sizes (e.g. with a common control, phylogenetic correlations); and finally, summaries that replicate analyses and outputs from widely used but no longer updated meta-analysis software. * Research synthesis practices are vital to many disciplines in the sciences, including ecology and evolutionary biology, and metagear aims to enrich the scope, quality and reproducibility of what can be achieved with the systematic review and meta-analysis of research outcomes.}, - keywords = {Data extraction and retrieval,Effect sizes,Meta-analysis,MetaWin,Quantitative reviews,Research synthesis,Systematic review}, - file = {/Users/fabio/Zotero/storage/ZXPYCIP7/Facilitating systematic reviews, data extraction and meta-analysis with the metagear package for R.pdf} -} - -@article{Lake2016, - title = {The Social Lab Classroom: {{Wrestling}} with\textemdash and Learning from\textemdash Sustainability Challenges}, - author = {Lake, Danielle and Fernando, Hannah and Eardley, Dana}, - year = {2016}, - month = mar, - volume = {12}, - number = {1}, - pages = {76--87}, - publisher = {{ProQuest}}, - issn = {15487733}, - doi = {10.1080/15487733.2016.11908155}, - abstract = {Unlike the traditional disciplinary approach to research and problem-solving still common in higher education, this article explicates and recommends an interdisciplinary, holistic pedagogical approach that takes seriously the interconnectedness of our wicked social sustainability challenges (e.g., poverty, global climate change, food access, among others). We argue that educators can better prepare students to tackle such wicked problems by requiring they engage with locally based problems connected to large-scale systemic challenges. By discussing the design and outcomes of the course ``Wicked Problems of Sustainability'' from both the students' and instructor's perspectives, we seek to extend and enhance effective pedagogical strategies. As a laboratory for sustainability education and innovation we have developed a transdisciplinary, community-engaged, upper-division undergraduate course that engages students in participatory research on the inextricably linked dimensions of social sustainability. Collaborating with community partners to work across networks, disciplines, and institutions, students have the opportunity to ameliorate real problems in the local community. In doing so, the course confronts students and the instructor with a series of robust challenges from intensive collaborations, to logistical and time-management dilemmas, to real-world execution issues. This article details the obstacles associated with messy inquiry, participatory research, and community engagement and provides recommendations for overcoming them.}, - keywords = {Community,Education,Innovation,Pedagogy,Social sustainability,Wicked problems} -} - -@book{Lakhtakia2013, - title = {Engineered {{Biomimicry}}}, - author = {Lakhtakia, Akhlesh and {Mart{\'i}n-Palma}, Ra{\'u}l J. and Carter, Princeton and Bhattarai, Narayan}, - year = {2013}, - journal = {Engineered Biomimicry}, - publisher = {{Elsevier}}, - doi = {10.1016/B978-0-12-415995-2.00007-6}, - urldate = {2014-03-04}, - abstract = {The fabrication of three-dimensional (3D) scaffold architectures that closely approximate or effectively mimic native tissue extracellular matrix (ECM) is essential for regenerative success. In tissue engineering, native differentiable cells are incorporated into 3D scaffolds along with growth factors and other proteins. Materials used for the 3D scaffold construction must be biocompatible and bioresorbable to minimize adverse reactions during tissue regeneration. A 3D architecture is created by utilizing materials with specific surface properties, porosity, mechanical strength, etc., to improve desired cell activity and enhance tissue growth. Ideal 3D scaffolds should also not only have hierarchical macroporous structures comparable to those of living tissue, but they should also have surface features on the nanometer scale to improve cell adhesion and accelerate cell in growth.}, - isbn = {978-0-12-415995-2}, - file = {/Users/fabio/Zotero/storage/DKA3SQSP/Lakhtakia et al. - 2013 - Engineered Biomimicry.pdf} -} - -@article{laldinpuiiDepolymerizationPolyEthylene2021, - title = {Depolymerization of Poly(Ethylene Terephthalate) Waste with Biomass-Waste Derived Recyclable Heterogeneous Catalyst}, - author = {Laldinpuii, Zathang and Lalhmangaihzuala, Samson and Pachuau, Zodinpuia and Vanlaldinpuia, Khiangte}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {126}, - pages = {1--10}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.02.056}, - urldate = {2021-03-28} -} - -@article{Lalevee2020, - title = {The Interest of an Evolution of Value Management Methodology in Complex Technical Projects for Improving Project Management}, - author = {Lalev{\'e}e, Alexis and Troussier, Nad{\`e}ge and Blanco, {\'E}ric and Berlioz, Marion}, - year = {2020}, - journal = {Procedia CIRP}, - volume = {90}, - pages = {411--415}, - issn = {22128271}, - doi = {10.1016/j.procir.2020.01.108}, - abstract = {Due to social, environmental and technical evolutions, complex technical projects (numerous stakeholders and several/high level expertises) need to evolve in their management practices. Many management and design methodologies exist to limit costs and resources used in a project. The proposed paper aims at identifying the challenges encountered in complex projects' management and determining how one of them, the Value Management, should be evolved. The research methodology combines a bibliographical analysis (on engineering methodologies for complex projects' management) and a demonstration of Value Management interest on a case study to address sustainable stakes.}, - keywords = {Complex projects,Engineering,Project management,Stakeholders,Value management,Value Sustainability}, - file = {/Users/fabio/Zotero/storage/RJDQTI3W/Lalevée2020.pdf} -} - -@article{Lam2002, - title = {Scaffold Development Using {{3D}} Printing with a Starch-Based Polymer}, - author = {Lam, C.X.F and Mo, X.M and Teoh, S.H and Hutmacher, D.W}, - year = {2002}, - month = may, - journal = {Materials Science and Engineering: C}, - volume = {20}, - number = {1-2}, - pages = {49--56}, - issn = {09284931}, - doi = {10.1016/S0928-4931(02)00012-7}, - urldate = {2014-01-31}, - keywords = {rapid prototyping,starch-based scaffolds,three-dimensional printing,tissue engineering}, - file = {/Users/fabio/Zotero/storage/ZYK34BB4/Lam et al. - 2002 - Scaffold development using 3D printing with a starch-based polymer.pdf} -} - -@article{LaMantia1992, - title = {Recycling of Heterogeneous Plastics Wastes: {{I}}\textemdash{{Blends}} with Low-Density Polyethylene}, - author = {La Mantia, Francesco Paolo}, - year = {1992}, - month = jan, - journal = {Polymer Degradation and Stability}, - volume = {37}, - number = {2}, - pages = {145--148}, - issn = {01413910}, - doi = {10.1016/0141-3910(92)90077-I}, - file = {/Users/fabio/Zotero/storage/AHXNLSSD/La Mantia - 1992 - Recycling of heterogeneous plastics wastes I—Blends with low-density polyethylene.pdf} -} - -@article{lamantiaAdditiveModelPredict2021, - title = {An {{Additive Model}} to {{Predict}} the {{Rheological}} and {{Mechanical Properties}} of {{Polypropylene Blends Made}} by {{Virgin}} and {{Reprocessed Components}}}, - author = {La Mantia, Francesco Paolo and Mistretta, Maria Chiara and Titone, Vincenzo}, - year = {2021}, - month = jan, - journal = {Recycling}, - volume = {6}, - number = {1}, - pages = {2}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2313-4321}, - doi = {10.3390/recycling6010002}, - urldate = {2021-01-08}, - abstract = {{$<$}p{$>$}In this work, an additive model for the prediction of the rheological and mechanical properties of monopolymer blends made by virgin and reprocessed components is proposed. A polypropylene sample has been reprocessed more times in an extruder and monopolymer blends have been prepared by simulating an industrial process. The scraps are exposed to regrinding and are melt reprocessed before mixing with the virgin polymer. The reprocessed polymer is, then, subjected to some thermomechanical degradation. Rheological and mechanical experimental data have been compared with the theoretical predictions. The results obtained showed that the values of this simple additive model are a very good fit for the experimental values of both rheological and mechanical properties.{$<$}/p{$>$}}, - keywords = {additive model,monopolymer blends,polypropylene,reprocessing}, - file = {/Users/fabio/Zotero/storage/S5ZW73JD/full-text.pdf} -} - -@article{lambertiRecyclingBioplasticsRoutes2020, - title = {Recycling of {{Bioplastics}}: {{Routes}} and {{Benefits}}}, - shorttitle = {Recycling of {{Bioplastics}}}, - author = {Lamberti, Fabio M. and {Rom{\'a}n-Ram{\'i}rez}, Luis A. and Wood, Joseph}, - year = {2020}, - month = oct, - journal = {Journal of Polymers and the Environment}, - volume = {28}, - number = {10}, - pages = {2551--2571}, - issn = {1572-8919}, - doi = {10.1007/s10924-020-01795-8}, - urldate = {2023-08-31}, - abstract = {Continual reduction of landfill space along with rising CO2 levels and environmental pollution, are global issues that will only grow with time if not correctly addressed. The lack of proper waste management infrastructure means gloablly commodity plastics are disposed of incorrectly, leading to both an economical loss and environmental destruction. The bioaccumulation of plastics and microplastics can already be seen in marine ecosystems causing a negative impact on all organisms that live there, ultimately microplastics will bioaccumulate in humans. The opportunity exists to replace the majority of petroleum derived plastics with bioplastics (bio-based, biodegradable or both). This, in conjunction with mechanical and chemical recycling is a renewable and sustainable solution that would help mitigate climate change. This review covers the most promising biopolymers PLA, PGA, PHA and bio-versions of conventional petro-plastics bio-PET, bio-PE. The most optimal recycling routes after reuse and mechanical recycling are: alcoholysis, biodegradation, biological recycling, glycolysis and pyrolysis respectively.}, - langid = {english}, - keywords = {Bio-PE,Bio-PET,Bioplastic,Chemical recycling,Poly(hydroxyalkanoates),Poly(lactic acid)}, - file = {/Users/fabio/Zotero/storage/ZNUK4TWK/Lamberti et al_2020_Recycling of Bioplastics.pdf} -} - -@article{Lamine2020, - title = {Educating Scientists and Engineers for Technology Entrepreneurship in the Emerging Digital Era}, - author = {Lamine, Wadid and Mian, Sarfraz and Fayolle, Alain and Linton, Jonathan D.}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - pages = {120552}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120552}, - urldate = {2021-01-01}, - abstract = {This special issue is critical to keeping Science and Technology Entrepreneurship Education in synchrony with the changing landscape resulting from developments in Information and Communication Technology. Six papers address the interaction of these enabling technologies with Science and Technology Entrepreneurship Education. The issue provides theoretical and empirical insights that are of value to entrepreneurs, educators, economic development community, policy makers and the management and leadership of educational institutions (colleges and universities).}, - file = {/Users/fabio/Zotero/storage/U57U6UBX/Unknown - 2020 - Educating scientists and engineers for technology entrepreneurship in the emerging digital era.pdf} -} - -@article{lanaras-mamounisDevelopmentIndexAssessing2022, - title = {The Development of an Index for Assessing the Circularity Level of Eco-Labels}, - author = {{Lanaras-Mamounis}, Georgios and Tsalis, Thomas A. and Anagnostopoulou, Konstantina and Vatalis, Konstantinos I. and Nikolaou, Ioannis E.}, - year = {2022}, - month = sep, - journal = {Sustainable Production and Consumption}, - volume = {33}, - pages = {586--596}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2022.07.019}, - urldate = {2022-08-11}, - abstract = {The Circular Economy concept is recognized as a promising instrument to address sustainability goals related to production and consumption patterns. This concept can be promoted through product labels which provide consumers with information about the product. So far, there is a lack of circular economy labels. The existing eco-labels mainly show the environmental impact of a product; however, few include some circularity aspects. Thus, this study addresses this gap by introducing an Eco-Label Circularity Index (ECI) based on scoring systems and Circular Economy principles in order to assess the circularity level of existing eco-labels. The proposed framework was applied to a sample of 27 eco-labels to test and demonstrate its applicability and provide insights into the circularity of the eco-labels examined. The findings show that the examined labels do not adequately cover Circular Economy issues through their certification process, hence they are unable to provide a clear indication of the products contribution to Circular Economy. The implementation of the ECI in this study demonstrates its use as a straightforward evaluation process and a useful first step in making the circular aspects of products transparent and reducing information asymmetry between producers and consumers.}, - langid = {english}, - keywords = {Circular economy evaluation framework,Circular economy labels,Eco-labels,Sustainable consumption,Sustainable development}, - file = {/Users/fabio/Zotero/storage/KDEZZTV8/Lanaras-Mamounis et al_2022_The development of an index for assessing the circularity level of eco-labels.pdf;/Users/fabio/Zotero/storage/JIP5QLJS/S2352550922001932.html} -} - -@article{landersAccountingEcosystemGoods2012, - title = {Accounting for {{Ecosystem Goods}} and {{Services}} in {{Life Cycle Assessment}} and {{Process Design}}}, - author = {Landers, Erin F. and Urban, Robert A. and Bakshi, Bhavik R.}, - year = {2012}, - month = nov, - journal = {Life Cycle Assessment Handbook: A Guide for Environmentally Sustainable Products}, - pages = {217--231}, - publisher = {{John Wiley \& Sons, Ltd}}, - doi = {10.1002/9781118528372.CH9}, - urldate = {2021-09-20}, - abstract = {Ecosystem goods and services, such as fresh water, soil, carbon and nitrogen cycles, and pollination are essential to all human activities. However, many engineering analyses undervalue or completely ignore them. Some methods attempt to incorporate these elements, such as ecological footprint, monetary valuation, and conventional life cycle assessment (LCA), but the focus is on energy consumption and emissions, ignoring the crucial role of ecosystems. This chapter presents ecologically based LCA (Eco-LCA) to quantify the role of ecosystem goods and services in the life cycle. The thermodynamic properties of exergy and emergy allow for the conversion of many different units of ecosystem goods and services to the common basis of thermodynamic work, to allow aggregation and comparison of results from Eco-LCA. A case study compares different ecosystem services using exergy and emergy, and the different insights that can be obtained from each. In addition, a case study highlighting the potential use of ecosystems in sustainable process design is presented. \textcopyright{} 2012 Scrivener Publishing LLC.}, - keywords = {eco,ecology,ecosystem,lca,Life cycle assessment,process design} -} - -@article{Landoni2019, - title = {Business Model Innovation in Cultural and Creative Industries: {{Insights}} from Three Leading Mobile Gaming Firms}, - author = {Landoni, Paolo and Dell'era, Claudio and Frattini, Federico and Messeni Petruzzelli, Antonio and Verganti, Roberto and Manelli, Luca}, - year = {2019}, - month = aug, - journal = {Technovation}, - pages = {102084}, - issn = {01664972}, - doi = {10.1016/j.technovation.2019.102084} -} - -@article{Landoni2019a, - title = {Convergence of Innovation Policies in the {{European}} Aerospace Industry (1960\textendash 2000)}, - author = {Landoni, Matteo and Ogilvie, Dt}, - year = {2019}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {147}, - pages = {174--184}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.07.007}, - urldate = {2020-05-21}, - abstract = {This paper contributes to an understanding of the evolution of the space industry and the role innovation policy and industrial change have played in that process. It looks at the impact of business-government interactions on the emerging space industry and how it evolved from the consolidation of aerospace businesses to the government creating national agencies to support the industry (through the use of innovation policy instruments) at the same time that privatization of the aerospace businesses occurred. We conducted a comparative case study of the aerospace industry in three European countries\textemdash France, Italy, and the United Kingdom (the U.K.)\textemdash that explores the governments' strategies to develop the emerging space industry. These strategies comprise a mix of innovation instruments, including the establishment of government agencies with the mission of supporting the space industry. The space agencies in each country had a common design that enabled the businesses to become global players in the industry. There is a link between the design of innovation policy mixes and the emerging model of European decentralized governance. This paper contributes to the literature by suggesting that government agencies are instruments of innovation policy for developing innovative industries.}, - keywords = {Aerospace industry,Innovation intermediaries,Innovation policy,Policy history,Policy mix,Privatization,Space industry} -} - -@article{Landry2012, - title = {Encouraging {{Creativity}} in the {{Workplace Through}} the {{Physical Environment}}. {{Focusing}} on the {{Office Workstation}}}, - author = {Landry, Dale R.}, - year = {2012}, - pages = {1--160} -} - -@article{langarudiMeasureMoreReport2021, - title = {Measure More or Report Faster? {{Effect}} of Information Perception on Management of Commons}, - author = {Langarudi, Saeed P. and Silva, Carlos G. and Fernald, Alexander G.}, - year = {2021}, - month = jan, - journal = {System Dynamics Review}, - volume = {37}, - number = {1}, - pages = {72--92}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {0883-7066}, - doi = {10.1002/sdr.1677}, - urldate = {2021-06-08} -} - -@article{langeProgressEcosystemAccounting2022, - title = {Progress on Ecosystem Accounting in {{Europe}}}, - author = {Lange, Sabine and Campagne, Carole Sylvie and Comte, Adrien and Bank, Emily and {Santos-Mart{\'i}n}, Fernando and Maes, Joachim and Burkhard, Benjamin}, - year = {2022}, - month = oct, - journal = {Ecosystem Services}, - volume = {57}, - pages = {101473}, - issn = {2212-0416}, - doi = {10.1016/j.ecoser.2022.101473}, - urldate = {2022-09-18}, - abstract = {Research on methods and applications on the integration of ecosystem services flow accounts into economic reporting systems has increased in the last decades. Along with Natural Capital Accounting (NCA), Ecosystem Accounting (EA) has been increasingly considered and has been integrated into research, policy and decision-making. Following the System of Environmental Economic Accounting \textendash{} Ecosystem Accounting (SEEA-EA) distinction of core and thematic accounts, this study presents a short overview of the EA progress in European countries. Based on the review of scientific and grey literature, the ecosystem accounting progress from 29 European countries was identified (EU27 countries, the United Kingdom and Norway). Overall, the largest share (more than 50\%) of finalized accounts at a national scale were recorded for the ecosystem extent accounts. Besides, the review revealed that for monetary ecosystem service accounts, the relatively largest proportion of accounts was developed only at the local scale. Generally, the accounting progress has been found to be distributed rather heterogeneously throughout the different countries. The most intensive ecosystem accounting progresses were identified for the United Kingdom and the Netherlands. The most frequently developed thematic account was the carbon account. Within this study, we only considered finalized ecosystem accounts. Nevertheless, in the process of the review, we came across a vast amount of further ongoing accounting initiatives. In combination with the growing relevance and increasing awareness of ecosystem accounting in policy- and decision-making in the countries and within supranational bodies like the UN and the EU, we expect a significant increase in completed ecosystem accounts in the foreseeable future.}, - langid = {english}, - keywords = {Condition account,Ecosystem services account,Extent account,Grey literature,Natural capital,Scientific literature}, - file = {/Users/fabio/Zotero/storage/LSGZ8FUP/S2212041622000699.html} -} - -@book{Langer2020, - title = {Methods of {{PET Recycling}}}, - author = {Langer, Ewa and Bortel, Krzysztof and Waskiewicz, Sylwia and {Lenartowicz-Klik}, Marta}, - year = {2020}, - journal = {Plasticizers Derived from Post-Consumer PET}, - doi = {10.1016/b978-0-323-46200-6.00005-2}, - abstract = {Recycling of poly(ethylene terephthalate) (PET) is extremely important due to the growing use of this material in many applications. The chapter presents data on PET consumption and the amount of waste generated resulting from its use. The main methods of PET recycling, such as chemical, mechanical and energetic ones, were characterized. PET chemical recycling was divided into the following categories of reactions: hydrolysis, glycolysis, alcoholysis and aminolysis, and each of these groups has been characterized. On the basis of the available literature, the methods used to carry out the reaction, the conditions of their conduct and the synthesis products obtained were presented. Chemical recycling has received the most attention because of the fact that a large section of this book concerns the work done by our team in this area.}, - isbn = {978-0-323-46200-6}, - file = {/Users/fabio/Zotero/storage/TPZBKE8E/Method for recycling PET.pdf} -} - -@article{langle-floresSystematicReviewEcosystem2020, - title = {A Systematic Review of Ecosystem Services of {{Islas Marietas National Park}}, {{Mexico}}, an Insular Marine Protected Area}, - author = {{Langle-Flores}, Alfonso and Quijas, Sandra}, - year = {2020}, - month = dec, - journal = {Ecosystem Services}, - volume = {46}, - pages = {101214}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2020.101214}, - urldate = {2021-04-21}, - abstract = {Islands are good models to conceptualize how ecosystem services are part of interactions in social-ecological systems. However, efforts have been insufficient to synthesize and integrate the accumulated knowledge of islands' ecosystem services. Holistic islands' ecosystem services assessments are key to achieve an effective translation of research into decision making, in contexts such as loss of biodiversity and climate change. Using a systematic review of 58 studies published from 1964 to 2019, we identified associations between environments, habitats, ecosystem services, their components and beneficiaries in Islas Marietas National Park (IMNP), marine protected area and international tourist destination in western Mexico. Analysis of occurrence and data visualization were applied to synthesize the information. We identified 12 ecosystem services, the most quantified services being migratory and nursery habitat for species, followed by gene pool protection, recreation and tourism in marine ecosystems, especially in coral reefs. The most quantified component was ``supply'' for eight services. Main beneficiaries of knowledge of services were information brokers. We highlighted substantial knowledge gaps and identified constraints to advance knowledge of ecosystem services in IMNP. We proposed steps to incorporate the islands' ecosystem services into decision making, and visualized pathways for future social-ecological synthesis research in marine protected areas.}, - keywords = {Demand,Economic value,Ecosystems service cascades,Social value,Social-ecological system,Supply} -} - -@article{langleyProcessStudiesChange2013, - title = {Process {{Studies}} of {{Change}} in {{Organization}} and {{Management}}: {{Unveiling Temporality}}, {{Activity}}, and {{Flow}}}, - shorttitle = {Process {{Studies}} of {{Change}} in {{Organization}} and {{Management}}}, - author = {Langley, Ann and Smallman, Clive and Tsoukas, Haridimos and {Van de Ven}, Andrew H.}, - year = {2013}, - month = feb, - journal = {Academy of Management Journal}, - volume = {56}, - number = {1}, - pages = {1--13}, - publisher = {{Academy of Management}}, - issn = {0001-4273}, - doi = {10.5465/amj.2013.4001}, - urldate = {2022-10-05}, - abstract = {Process studies focus attention on how and why things emerge, develop, grow, or terminate over time. We identify various ontological assumptions underlying process research, explore its methods and challenges, and draw out some of its substantive contributions revealed in this Special Research Forum on Process Studies of Change in Organization and Management. Process studies take time seriously, illuminate the role of tensions and contradictions in driving patterns of change, and show how interactions across levels contribute to change. They may also reveal the dynamic activity underlying the maintenance and reproduction of stability.}, - keywords = {Adaptation/Change,{Attitudes, Cognitions, and Affect},Critical Management Studies,Decision making (macro perspectives),Individual learning,Justice/fairness,Managerial and Organizational Cognition,Organization and Management Theory,Organizational Behavior,Quantitative Orientation} -} - -@article{LaNotte2021, - title = {Editorial Special Issue Natural Capital Accounting: {{The}} Content, the Context, and the Framework}, - author = {La Notte, Alessandra and Vallecillo, Sara and Maes, Joachim and Shapiro, Carl D. and Bagstad, Kenneth J. and Carter Ingram, Jane and Glynn, Pierre D.}, - year = {2021}, - month = aug, - journal = {Ecosystem Services}, - pages = {101347}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101347}, - urldate = {2021-09-15}, - abstract = {Editorial special issue natural capital accounting: The content, the context, and the framework \ding{73} Approaches to mainstream nature into decision making must recognize the need to combine different disciplinary expertise using not just common terminology but also a common set of tools. Natural Capital Accounting (NCA) is a tool that is increasingly used to consistently frame two disciplines that need to interact in a harmonized way: ecology and economics. Ecology is, according to its etymology, the knowledge (logos) of the world in which we live (oikos, meaning house). We depend on the natural world for all our needs: food, water, breathable air, and protection, in one word: survival. This knowledge becomes increasingly relevant given the breakdown of many ecological systems, which have been described by scientists over the last 15 years through several key global initiatives and syntheses (e.g., the Millennium Assessment (2005), the TEEB study (TEEB, 2010), Intergovernmental Panel on Climate Change Assessment Report (2014), Intergovernmental Science-Policy Panel on Biodiversity and Ecosystem Services Global Assessment (2019)). Economics is, according to its etymology, the laws/rules (nomos) made by people to manage the world in which we live (oikos). Economics is at first glance about markets and trade. In its full sense, however, economics examines choices, incentives, rules, and norms. These govern how we sustain access to resources needed for societal well-being and survival, including clean air and safe water. Economics thus plays a key role in how we manage our environment and natural resources. These constitute an asset or stock (i.e., of capital) that yields a flow of services over time. 'Natural capital' is one of four types of capital built , human, social, and natural-that interact in complex ways to deliver all human benefits (Costanza et al., 2017). These interactions between natural capital and the economy require human participation in managing ecosystems and are informed through scientific measurement and modelling that build understanding of the positive and negative consequences of policy alternatives. Knowledge about nature (ecology) provides information content needed to mainstream decision making based on an understanding of the consequences of ecosystem management for current and future generations. The information content explains "what" we need to measure. The management (economics) of natural capital is the context we adopt to mainstream ecological content into decision making. The context explains "why" to set criteria and make choices, based on scientific data: economics informs decisions that generate consequences for the linked environmental-economic system. Integration of the ecological content into the economic context can take place in many ways. Among the diverse ways to operationalize this integration, preferred approaches need to be based on the expected audiences and their needs. Conventional measurements of the economy are based on the System of National Accounts (SNA), the statistical framework that provides accounting principles to enable compilation of economic data supporting decision making by a vast array of actors, from national and sub-national governments to corporations to supranational and global entities. The recent Dasgupta Review (Dasgupta, 2021) explains how decision making ultimately relates to the way we manage the entire biosphere, and economics is a core discipline that can be used to frame and shape management decisions. Policy discourses and trade-offs are driven by many factors, such as (1) the rules of governments and private companies when undertaking investment projects; (2) the practices of companies when producing goods and services that are produced, sold, traded, and disposed; and (3) financial profitability and shareholder and reputational values when comparing alternative asset portfolios. An integrated environmental-economic accounting system would mainstream the use of environmental data into economics and decision making. An accounting approach guarantees internal consistency with the structure of accounts wherein both stocks and flows are part of a single recording system (UN, 2021). The existence of a consistent mechanism and set of rules differentiates "accounting" from ecosystem service assessments and reporting. An integrated accounting system for natural capital is a framework designed to deliver ecological content for decision making in a manner that is consistent between applications (within and between countries) and with the SNA. Consistency with the SNA guarantees a structured and harmonised approach across space and over time, prevents doubles counting, and ensures that ecosystems and their services are main-streamed into decision making by bridging with economic tools that are in turn based on national accounts (La Notte et al., 2020). The framework explains "how" relevant information is delivered to users. In this case, primary users are (1) government ministries of economics, finance, and policy; (2) central banks and multilateral development banks that play a role in driving economic development policies; and (3) other private sector and public entities (by contrast, ecologists and natural scientists have their own assessment frameworks and tools). The information (both data sources and modelling tools) to support the quantification of stocks and flows in the NCA framework can be used by other tools (i.e., for ecosystem service assessment and reporting, with \ding{73} We acknowledge the assistance of Leon Braat, who served as the editor of this special issue. Leon sadly and unexpectedly passed away in March 2021 as the special issue was nearing completion. We greatly appreciate all the work that he did to bring this special issue to fruition. We also recognize the depth of his service and his enthusiasm that helped advance the ecosystem services community.}, - isbn = {2021.101347}, - file = {/Users/fabio/Zotero/storage/WTHULIDJ/full-text.pdf} -} - -@article{lanotteEcosystemServicesClassification2017, - title = {Ecosystem Services Classification: {{A}} Systems Ecology Perspective of the Cascade Framework}, - author = {La Notte, Alessandra and D'Amato, Dalia and M{\"a}kinen, Hanna and Paracchini, Maria Luisa and Liquete, Camino and Egoh, Benis and Geneletti, Davide and Crossman, Neville D.}, - year = {2017}, - month = mar, - journal = {Ecological Indicators}, - volume = {74}, - pages = {392--402}, - publisher = {{Elsevier B.V.}}, - issn = {1470160X}, - doi = {10.1016/j.ecolind.2016.11.030}, - urldate = {2021-04-23}, - abstract = {Ecosystem services research faces several challenges stemming from the plurality of interpretations of classifications and terminologies. In this paper we identify two main challenges with current ecosystem services classification systems: i) the inconsistency across concepts, terminology and definitions, and; ii) the mix up of processes and end-state benefits, or flows and assets. Although different ecosystem service definitions and interpretations can be valuable for enriching the research landscape, it is necessary to address the existing ambiguity to improve comparability among ecosystem-service-based approaches. Using the cascade framework as a reference, and Systems Ecology as a theoretical underpinning, we aim to address the ambiguity across typologies. The cascade framework links ecological processes with elements of human well-being following a pattern similar to a production chain. Systems Ecology is a long-established discipline which provides insight into complex relationships between people and the environment. We present a refreshed conceptualization of ecosystem services which can support ecosystem service assessment techniques and measurement. We combine the notions of biomass, information and interaction from system ecology, with the ecosystem services conceptualization to improve definitions and clarify terminology. We argue that ecosystem services should be defined as the interactions (i.e. processes) of the ecosystem that produce a change in human well-being, while ecosystem components or goods, i.e. countable as biomass units, are only proxies in the assessment of such changes. Furthermore, Systems Ecology can support a re-interpretation of the ecosystem services conceptualization and related applied research, where more emphasis is needed on the underpinning complexity of the ecological system.}, - pmid = {28260996}, - keywords = {Cascade framework,Ecological theory,Ecosystem functioning,Ecosystem service classification,Systems ecology}, - file = {/Users/fabio/Zotero/storage/V3DJLZ67/full-text.pdf} -} - -@article{Lanzotti2019, - title = {A Comparison between Mechanical Properties of Specimens {{3D}} Printed with Virgin and Recycled {{PLA}}}, - author = {Lanzotti, Antonio and Martorelli, Massimo and Maietta, Saverio and Gerbino, Salvatore and Penta, Francesco and Gloria, Antonio}, - year = {2019}, - journal = {Procedia CIRP}, - volume = {79}, - pages = {143--146}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2019.02.030}, - abstract = {The current research was focused on a further insight into the mechanical properties of 3D parts printed with virgin and recycled polylactic acid (PLA). A first set of specimens was printed with virgin PLA lament and mechanically tested. Such specimens were then ground up and re-extruded into filament using a homemade extruder. The re-extruded filament was employed to manufacture a new set of specimens which were also analysed. Three recycling processes were performed to assess the effect on the mechanical properties. The obtained results suggested that 3D printing with recycled PLA may be a viable option.}, - isbn = {3908176824}, - keywords = {Additive Manufacturing,Mechanical properties,Recycled polymers}, - file = {/Users/fabio/Zotero/storage/WFUIZ8UG/A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA.pdf} -} - -@article{lapercheCriseInnovationRenouveau2011, - title = {{Crise, innovation et renouveau des territoires~: d\'ependance de sentier et trajectoires d'\'evolution}}, - shorttitle = {{Crise, innovation et renouveau des territoires}}, - author = {Laperche, Blandine and Uzunidis, Dimitri}, - year = {2011}, - journal = {Innovations}, - volume = {35}, - number = {2}, - pages = {159--182}, - publisher = {{De Boeck Sup\'erieur}}, - address = {{Louvain-la-Neuve}}, - issn = {1267-4982}, - doi = {10.3917/inno.035.0159}, - urldate = {2023-02-15}, - abstract = {R\'esum\'eDans cet article, nous cherchons \`a expliquer la constitution et le changement de trajectoire suivie par une \'economie territoriale. Nous expliquons l'int\'er\^et que peuvent apporter les concepts d'apprentissage, d'actifs sp\'ecifiques et d'actifs secondaires, de routines \`a la question de l'\'evolution des territoires. Puis, nous nous int\'eresserons plus particuli\`erement aux formes institutionnelles structurant le milieu et \`a leur r\^ole dans le processus de cr\'eation et de renouvellement des ressources productives. De cette analyse, nous caract\'eriserons notamment l'influence des \guillemotleft ~macro-institutions~\guillemotright{} sur la dynamique d'innovation et le degr\'e de responsabilit\'e imputable aux politiques \'economiques men\'ees par les pouvoirs publics.Codes JEL~: R11, R58, B52}, - langid = {french}, - keywords = {actifs sp\'ecifiques,changement institutionnel,\'economie territoriale,innovation,politiques publiques,trajectoire}, - file = {/Users/fabio/Zotero/storage/HFNXPF87/revue-innovations-2011-2-page-159.html} -} - -@article{Laplume2015, - title = {Open-Source, Self-Replicating 3-{{D}} Printer Factory for Small-Business Manufacturing}, - author = {Laplume, Andre and Anzalone, Gerald C. and Pearce, Joshua M.}, - year = {2015}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {85}, - number = {1-4}, - pages = {633--642}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-015-7970-9}, - abstract = {Additive manufacturing with 3-D printers may be a key technology enabler for entrepreneurs seeking to use disruptive innovations such as business models utilizing distributed manufacturing. Unlike centralized manufacturing, distributed manufacturing makes the parts and products (the prints) at (or closer to) the source of the demand, cutting out much of the traditional supply chain. Although many expect 3-D printing to take off at the household level and previous work has shown significant returns for those choosing to do so, there are still significant barriers to entry for typical consumers. Our analysis demonstrates that for an individual to make an abnormally high return on their investments in 3-D printers, they must serve others to achieve high utilization rates. The impetus to do so is created by a service that can undercut traditionally manufactured products due to affordability and customizability. Low-cost, open-source 3-D printers are now priced within range of individual entrepreneurs who can take advantage of the long tail of consumers with highly varied interests. The margin advantage, net present value, and return on investment (ROI) analysis provided herein could form the basis of thousands of new small-business ventures in the coming years. \textcopyright{} 2015 Springer-Verlag London}, - isbn = {0017001579}, - keywords = {3-D printing,Business model,Disruptive innovation,Distributed manufacturing,Entrepreneurship,RepRap}, - file = {/Users/fabio/Zotero/storage/7YNKR648/Open-source, self-replicating 3-D printer factory for small-business manufacturing.pdf;/Users/fabio/Zotero/storage/HP7LX5I7/Open-source, self-replicating 3-D printer factory for small-business manufacturing.pdf} -} - -@article{Laplume2016, - title = {Global Value Chains from a {{3D}} Printing Perspective}, - author = {Laplume, Andr{\'e} O and Petersen, Bent and Pearce, Joshua M}, - year = {2016}, - month = jun, - journal = {Journal of International Business Studies}, - volume = {47}, - number = {5}, - pages = {595--609}, - publisher = {{Nature Publishing Group}}, - issn = {0047-2506}, - doi = {10.1057/jibs.2015.47}, - isbn = {9064873267}, - keywords = {3d printing,additive manufacturing,geo-,geographic span,value chain}, - file = {/Users/fabio/Zotero/storage/9ZG7U2FE/Laplume, Petersen, Pearce - 2016 - Global value chains from a 3D printing perspective.pdf} -} - -@article{Larrain2021, - title = {Techno-Economic Assessment of Mechanical Recycling of Challenging Post-Consumer Plastic Packaging Waste}, - author = {Larrain, Macarena and Van Passel, Steven and Thomassen, Gwenny and Van Gorp, Bart and Nhu, Trang T. and Huysveld, Sophie and Van Geem, Kevin M. and De Meester, Steven and Billen, Pieter}, - year = {2021}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {170}, - pages = {105607}, - publisher = {{Elsevier}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105607}, - urldate = {2021-04-29}, - abstract = {Increasing plastic recycling rates is crucial to tackle plastic pollution and reduce consumption of fossil resources. Recycling routes for post-consumer plastic fractions that are technologically and economically feasible remain a challenge. Profitable value chains for recycling mixed film and tray-like plastics have hardly been implemented today, in sharp contrast to recycling of relatively pure fractions such as polyethylene terephthalate and high-density polyethylene bottles. This study examines the economic feasibility of implementing mechanical recycling for plastic waste such as polypropylene, polystyrene, polyethylene films and mixed polyolefins. In most European countries these plastic fractions are usually incinerated or landfilled whilst in fact technologies exist to mechanically recycle them into regranulates or regrinds. Results show that the economic incentives for the recycling of plastic packaging depend predominantly on the product price and product yield. At current price levels, the most profitable plastic fraction to be recycled is PS rigids, with an internal rate of return of 14\%, whereas the least profitable feed is a mixed polyolefin fraction with a negative internal rate of return in a scenario with steadily rising oil prices. Moreover, these values would be substantially reduced if oil prices, and therefore plastic product prices decrease. Considering a discount rate of 15\% for a 15-year period, mechanical recycling is not profitable if no policy changes would be imposed by governments. Clearly low oil prices may jeopardize the mechanical recycling industry, inducing the need for policies that would increase the demand of recycled products such as imposing minimal recycled content targets.}, - keywords = {Circular economy,Oil,Plastic packaging,Plastic recycling,Techno-economic assessment,Uncertainty} -} - -@article{Larrea-Gallegos2022, - title = {Exploring Machine Learning Techniques to Predict Deforestation to Enhance the Decision-Making of Road Construction Projects}, - author = {{Larrea-Gallegos}, Gustavo and {V{\'a}zquez-Rowe}, Ian}, - year = {2022}, - month = feb, - journal = {Journal of Industrial Ecology}, - volume = {26}, - number = {1}, - pages = {225--239}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13185}, - urldate = {2022-02-17}, - abstract = {Land use changes (LUCs), which are defined as the modification in the use of land due to anthropogenic activities, are important sources of GHG emissions. In this context, understanding future trends of LUCs, such as deforestation, in a spatial manner is relevant. The main objective of this study is to generate a deforestation prediction model for a given period of time (i.e., 2002\textendash 2017 and 2010\textendash 2017) to estimate the potential carbon emissions associated with different anthropogenic variables in the Peruvian Amazon using machine learning (ML) algorithms. This study was motivated in the analysis of a road project previously studied using life cycle assessment (LCA). Models using neural networks and random forest algorithms were trained and evaluated in a fully cloud-based environment using Google Earth Engine. ML-related results demonstrated that random forest is a quicker and straightforward response to model the system under study, especially considering that data do not require additional processing during the modeling and prediction stages. Predicted results suggest that expected road expansion may be related to considerable carbon emissions in the future. Calculated values are relevant especially if the mitigation efforts that Peru has complied with in the Paris Agreement are considered. The increased complexity of the framework is justified since it allows identifying the location of hotspots and may potentially complement the utility of LCA in policy support in the areas of territorial planning and tropical road expansion.}, - keywords = {Amazon rainforest,climate change,industrial ecology,life cycle assessment,Peru,random forest}, - file = {/Users/fabio/Zotero/storage/2RDDE7B6/Larrea-Gallegos, Vázquez-Rowe - 2022 - Exploring machine learning techniques to predict deforestation to enhance the decision-making of.pdf;/Users/fabio/Zotero/storage/G8I9J96V/Larrea-Gallegos, Vázquez-Rowe - 2022 - Exploring machine learning techniques to predict deforestation to enhance the decision-making(2).pdf} -} - -@article{laskurain-iturbeExploringInfluenceIndustry2021, - title = {Exploring the Influence of Industry 4.0 Technologies on the Circular Economy}, - author = {{Laskurain-Iturbe}, Iker and {Arana-Land{\'i}n}, Germ{\'a}n and {Landeta-Manzano}, Be{\~n}at and {Uriarte-Gallastegi}, Naiara}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {321}, - pages = {128944}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128944}, - urldate = {2021-09-15} -} - -@article{Latif2012, - title = {Environmental {{Values}} as a {{Predictor}} of {{Recycling Behaviour}} in {{Urban Areas}}: {{A Comparative Study}}}, - author = {Latif, Saripah Abdul and Omar, Mohd Shukri and Bidin, Yeop Hussin and Awang, Zainudin}, - year = {2012}, - journal = {Procedia - Social and Behavioral Sciences}, - volume = {50}, - number = {July}, - pages = {989--996}, - issn = {18770428}, - doi = {10.1016/j.sbspro.2012.08.100}, - abstract = {The objective of the study is to compare the causal relationships between environmental values and recycling behaviour of consumers in two urban areas. A survey was carried out on 300 respondents. Structural equation modeling (SEM) was used in obtaining measurement models and structural models. The outcomes show differences in the recycling behaviuor of the two samples. Environmental value is found to be a significant predictor for recycling behaviour in both urban areas but with greater effect in Kuala Lumpur as compared to Kota Kinabalu. The study should facilitate the local governments in overcoming urban waste management problem.}, - isbn = {18770428}, - keywords = {Comparative study,Environmental values,Intention to recycle,Recycling behaviour}, - file = {/Users/fabio/Zotero/storage/IC6DYYFE/Environmental Values as a Predictor of Recycling Behaviour in Urban Areas A Comparative Study.pdf} -} - -@inproceedings{Lauff2019, - title = {Prototyping Canvas: {{Design}} Tool for Planning Purposeful Prototypes}, - booktitle = {Proceedings of the {{International Conference}} on {{Engineering Design}}, {{ICED}}}, - author = {Lauff, Carlye and Menold, Jessica and Wood, Kristin L}, - year = {2019}, - volume = {2019-Augus}, - pages = {1563--1572}, - issn = {22204342}, - doi = {10.1017/dsi.2019.162}, - abstract = {While prototypes are critical to the creation of successful products and innovative solutions, building a prototype is characterized by large sunk costs and a plethora of unknowns. The versatility and effectiveness of prototypes paired with the ambiguous nature of developing a prototype can lead to wasted resources. Recent studies support this claim, demonstrating that under certain circumstances, designers often prototype without a clear purpose, building prototypes as a function of the design process rather than as a function of the design. These findings motivated the creation of the Prototyping Canvas, a tool to aid designers in planning for purposeful prototypes by identifying critical assumptions and questions to guide development. Business and engineering design literature influenced the development of the canvas, which was first tested with a client project in the SUTD-MIT International Design Centre (IDC). The feedback and insights from the design team guided revisions to the canvas. The updated canvas was then validated with 55 professionals during a design project sprint. The purpose of this paper is to present the Prototyping Canvas as a valid and effective design tool.}, - keywords = {Design methods,Design practice,New product development,Prototype}, - file = {/Users/fabio/Zotero/storage/PYPKE3YP/full-text.pdf} -} - -@article{lauffWhatPrototypeWhat2018, - title = {What Is a Prototype? What Are the Roles of Prototypes in Companies?}, - author = {Lauff, Carlye A. and {Kotys-Schwartz}, Daria and Rentschler, Mark E.}, - year = {2018}, - month = jun, - journal = {Journal of Mechanical Design, Transactions of the ASME}, - volume = {140}, - number = {6}, - publisher = {{American Society of Mechanical Engineers (ASME)}}, - issn = {10500472}, - doi = {10.1115/1.4039340}, - urldate = {2021-02-16}, - abstract = {Prototyping is an essential part of product development in companies, and yet it is one of the least explored areas of design practice. There are limited ethnographic studies conducted within companies, specifically around the topic of prototyping. This is an empirical and industrial-based study using inductive ethnographic observations to further our understanding of the various roles prototypes play in organizations. This research observed the entire product development cycle within three companies in the fields of consumer electronics (CE), footwear (FW), and medical devices (MD). Our guiding research questions are: What is a prototype? What are the roles of prototypes across these three companies? Through our analysis, we uncovered that prototypes are tools for enhanced communication, increased learning, and informed decision-making. Specifically, we further refine these categories to display the types of communication, learning, and decision-making that occur. These insights are significant because they validate many prior prototyping theories and claims, while also adding new perspectives through further exploiting each role. Finally, we provide newly modified definitions of a prototype and prototyping based on this empirical work, which we hope expands designers' mental models for the terms.} -} - -@misc{Laurans2013, - title = {Use of Ecosystem Services Economic Valuation for Decision Making: {{Questioning}} a Literature Blindspot}, - author = {Laurans, Yann and Rankovic, Aleksandar and Bill{\'e}, Rapha{\"e}l and Pirard, Romain and Mermet, Laurent}, - year = {2013}, - month = apr, - journal = {Journal of Environmental Management}, - volume = {119}, - pages = {208--219}, - publisher = {{Academic Press}}, - issn = {03014797}, - doi = {10.1016/j.jenvman.2013.01.008}, - urldate = {2021-08-29}, - abstract = {Ecosystem Services economic Valuation (ESV) is often seen as a tool that can potentially enhance our collective choices regarding ecosystem services as it factors in the costs and benefits of their degradation. Yet, to achieve this, the social processes leading to decisions need to use ESV effectively. This makes it necessary to understand if and how ESV is or is not used by decision-makers. However, there appears to be a literature blindspot as to the issue of the Use of Ecosystem Services economic Valuation (UESV). This paper proposes a systematic review on UESV in peer-reviewed scientific literature. It shows that this literature gives little attention to this issue and rarely reports cases where ESV has been put to actual use, even though such use is frequently referred to as founding the goal and justification of ESV. The review identifies three categories of potential UESV: decisive, technical and informative, which are usually mentioned as prospects for the valuations published. Two sets of hypotheses are examined to explain this result: either the use of ESV is a common practice, but is absent from the literature reviewed here; or the use of ESV is effectively rare. These hypotheses are discussed and open up further avenues of research which should make the actual use of ESV their core concern. \textcopyright{} 2013 Elsevier Ltd.}, - pmid = {23500023}, - keywords = {Decision-making,Economic valuation,Ecosystem services,Policy,Use}, - file = {/Users/fabio/Zotero/storage/5S8AJRQW/Laurans et al. - 2013 - Use of ecosystem services economic valuation for decision making Questioning a literature blindspot.pdf} -} - -@techreport{laurentTransfertGenieIndustriel, - title = {Transfert Du G\'enie Industriel Vers l'ing\'enierie Urbaine : Vers Une Approche Collaborative Des Projets Urbains}, - author = {{Laurent}}, - urldate = {2021-05-19}, - file = {/Users/fabio/Zotero/storage/TKVTE9DV/full-text.pdf} -} - -@article{Laureto2017, - title = {Thermal Properties of 3-{{D}} Printed Polylactic Acid-Metal Composites}, - author = {Laureto, John and Tomasi, Julie and King, Julia A. and Pearce, Joshua M.}, - year = {2017}, - month = jun, - journal = {Progress in Additive Manufacturing}, - volume = {2}, - number = {1-2}, - pages = {57--71}, - issn = {2363-9512}, - doi = {10.1007/s40964-017-0019-x}, - file = {/Users/fabio/Zotero/storage/6RM9E9I7/Thermal properties of 3-D printed polylactic acid-metal composites.pdf} -} - -@article{Laureto2018, - title = {Anisotropic Mechanical Property Variance between {{ASTM D638-14}} Type i and Type Iv Fused Filament Fabricated Specimens}, - author = {Laureto, John J. and Pearce, Joshua M.}, - year = {2018}, - journal = {Polymer Testing}, - volume = {68}, - number = {March}, - pages = {294--301}, - publisher = {{Elsevier}}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2018.04.029}, - abstract = {The open source introduction of fused filament fabrication (FFF) enables distributed manufacturing of consumer products. However, with a wide range of low-cost FFF 3-D printers and settings possible, there is a lack of information on the variability in printed mechanical properties. This paper utilizes a large pool of 47 user-assembled 3-D printers to quantify the mechanical property variations of ultimate tensile strength (UTS) and yield strength of FFF printed components using ASTM D638-14 horizontally-oriented Type I and IV geometries for poly lactic acid (PLA). The results indicate that utilizing Type IV tensile test piece geometry may overestimate the UTS relative to the Type I. Furthermore, anisotropic mechanical property variances were quantified for Type IV specimens (vertical and horizontal orientations). Vertical tensile specimens had an ultimate tensile strength 47.9\% less than horizontal. Finally, the abundant supply of PLA 3-D prints suggest open-source printers assembled by individual operators can produce quality plastic components although the mechanical performance of the given part can vary dramatically based on the operator selection of printing parameters that provide a visually acceptable part.}, - keywords = {3D printing,FDM,Fused filament fabrication,Mechanical testing,Polylactic acid,RepRap}, - file = {/Users/fabio/Zotero/storage/8CQD3V99/Anisotropic mechanical property variance between ASTM D638-14 type i and type iv fused filament fabricated specimens.pdf} -} - -@article{lautenbachBlindSpotsEcosystem2019, - title = {Blind Spots in Ecosystem Services Research and Challenges for Implementation}, - author = {Lautenbach, Sven and Mupepele, Anne Christine and Dormann, Carsten F. and Lee, Heera and Schmidt, Stefan and Scholte, Samantha S.K. and Seppelt, Ralf and {van Teeffelen}, Astrid J.A. and Verhagen, Willem and Volk, Martin}, - year = {2019}, - month = dec, - journal = {Regional Environmental Change}, - volume = {19}, - number = {8}, - pages = {2151--2172}, - publisher = {{Springer}}, - issn = {1436378X}, - doi = {10.1007/s10113-018-1457-9}, - urldate = {2021-04-23}, - abstract = {Ecosystem service research is high on the policy agenda. Strategies to synthesize individual success stories and derive generalized results to provide guidance for policymakers and stakeholder is central to many science-policy initiatives, such as Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services and The Economics of Ecosystems and Biodiversity. However, generalization requires the documentation of basic information on methods and results of case studies, which might not be present throughout all case studies. We used a quantitative review based on a random sample of studies published in the ISI Web of Knowledge between 1996 and 2016 to identify blind spots in ecosystem service research that might hinder the generalization. We structured our analysis along critical questions about five facets that characterize the holistic ideal of ecosystem services research: (i) social-ecological validity of ecosystem data and models, (ii) consideration of trade-offs between ecosystem services, (iii) recognition of off-site effects, (iv) comprehensive and shrewd involv ement of stakeholders, and (v) relevance and usability of study results for the operationalization of the ecosystem service concept in practice. Results show that these facets were not addressed by the majority of case studies including more recent studies. Clusters of ecosystem services studied together were prone to different blind spots. To effectively operationalize the concept of ecosystem services, the blind spots need to be addressed by upcoming studies. A list of critical questions is provided to raise the awareness of the blind spots both for synthesis of existing knowledge and for future research agendas.}, - keywords = {Good modeling practice,Off-site effects,Operationalization,Quantitative review,Stakeholder involvement,Trade-offs} -} - -@article{Laverne2016, - title = {Fabrication Additive : {{Principes}} G\'en\'eraux}, - author = {Laverne, Floriane and Segonds, Fr{\'e}d{\'e}ric and Dubois, Patrice}, - year = {2016}, - journal = {Techniques de l'ing\'enieur}, - volume = {33}, - number = {0}, - abstract = {La fabrication additive (FA) a pris une ampleur consid\'erable depuis quelques ann\'ees. Le passage progressif des activit\'es de prototypage vers celles de fabrication directe de pi\`eces fonctionnelles remet en cause les m\'ethodes de conception et de fabrication traditionnelles, fond\'ees sur les proc\'ed\'es conventionnels. Cet article fait le point sur les diff\'erentes technologies de FA et leurs champs d'utilisation tout au long du cycle de vie du produit. Les diverses applications industrielles sont d\'ecrites au travers d'exemples issus de secteurs technologiques de pointe}, - isbn = {7200049069}, - keywords = {conception et fabrication de produits,fabrication additive,proc\'ed\'es de fabrication,prototypage rapide}, - file = {/Users/fabio/Zotero/storage/VVGR2WLC/Laverne, Segonds, Dubois - 2016 - Fabrication additive Principes généraux.pdf} -} - -@article{lavoieAquaticMicroNanoplastics2021, - title = {Aquatic Micro- and Nano-Plastics in Life Cycle Assessment: {{Development}} of an Effect Factor for the Quantification of Their Physical Impact on Biota}, - author = {Lavoie, J{\'e}r{\^o}me and Boulay, Anne Marie and Bulle, C{\'e}cile}, - year = {2021}, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13140}, - urldate = {2022-01-25}, - abstract = {Plastic litter of all sizes has been acknowledged as a serious threat to biodiversity, especially in the marine environment. The fact that life cycle assessment (LCA) does not properly consider these issues is a serious problem for the aspirations of LCA in the public sphere. This paper focuses on micro- and nano-sized plastics (MNPs), which have the potential to cause a substantial impact on ecosystem quality because of their increased presence in the marine compartment and capacity to affect a greater range of species. The data regarding MNPs' effect on different aquatic species were extracted from the academic literature. These data were then explored and analyzed to bring to light the possibilities in terms of effect factor (EF) developments and the existing relations between effect on aquatic ecosystems and different parameters such as particle size, polymer type, and shape. No significant difference could be observed between the effect of the different subgroups of MNPs tested when considering a single species. However, when including many species in the analysis, differences could be noted between polystyrene (PS) and other polymer types. The high uncertainty on the developed EFs combined with this lack of statistical difference among subgroups at the single species level suggest that the use of a single generic EF could be appropriate for now. This EF is provided along with Species Sensitivity Distributions developed to allow for a quick visualization of the gathered data used to generate the EFs. This EF can now be used to quantify the physical impact of all MNPs in life cycle impact assessment.}, - keywords = {ecotoxicity,industrial ecology,life cycle assessment (LCA),life cycle impact assessment (LCIA),marine plastic litter,microplastic}, - file = {/Users/fabio/Zotero/storage/J57UQMDX/full-text.pdf} -} - -@article{lawalINDUSTRIALSymbiosisTOOLS2020, - ids = {Lawal2020}, - title = {{{INDUSTRIAL}} Symbiosis {{TOOLS}}\textemdash{{A}} Review}, - author = {Lawal, Musa and Alwi, Sharifah Rafidah Wan and Manan, Zainuddin Abdul and Ho, Wai Shin}, - year = {2020}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124327}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124327}, - urldate = {2020-10-05}, - isbn = {2020.124327}, - file = {/Users/fabio/Zotero/storage/TQKK89YQ/full-text.pdf} -} - -@article{Lazarevic2010, - title = {Plastic Waste Management in the Context of a {{European}} Recycling Society: {{Comparing}} Results and Uncertainties in a Life Cycle Perspective}, - author = {Lazarevic, David and Aoustin, Emmanuelle and Buclet, Nicolas and Brandt, Nils}, - year = {2010}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {55}, - number = {2}, - pages = {246--259}, - publisher = {{Elsevier B.V.}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2010.09.014}, - abstract = {A number of life cycle assessment (LCA) studies have been undertaken within the last 15 years comparing end-of-life treatment options for post-consumer plastic waste, including techniques such as: mechanical recycling, feedstock recycling, incineration with energy recovery and landfilling. These have attempted to support decisions in the formulation of waste management strategies and policies. In light of the introduction of life cycle thinking into European waste policies, specifically in relation to the waste hierarchy, a literature review of publically available LCA studies evaluating alternative end-of-life treatment options for plastic waste has been conducted. This has been done in order to: establish if a consensus exists as to the environmentally preferable treatment option for plastic waste; identify the methodological considerations and assumptions that have led to these conclusions; and determine the legitimacy of applying the waste hierarchy to the plastic waste stream. The majority of the LCA studies concluded that, when single polymer plastic waste fractions with little organic contamination are recycled and replace virgin plastic at a ratio of close to 1:1, recycling is generally the environmentally preferred treatment option when compared to municipal solid waste incineration. It has been found that assumptions relating to the virgin material substitution ratio and level of organic contamination can have a significant influence upon the results of these studies. Although a limited number of studies addressed feedstock recycling, feedstock recycling and the use of plastic waste as a solid recovered fuel in cement kilns were preferred to municipal solid waste incineration. Landfilling of plastic waste compared to municipal solid waste incineration proved to be the least preferred option for all impact categories except for global warming potential. Due to the uncertainty surrounding some assumptions in the studies, it cannot be said with confidence that the waste hierarchy should be applied to plastic waste management as a general rule. ?? 2010 Elsevier B.V. All rights reserved.}, - isbn = {0921-3449}, - keywords = {Environmental impacts,Life cycle assessment,Plastic waste,Recycling,Waste hierarchy}, - file = {/Users/fabio/Zotero/storage/6A8N2WZG/Plastic waste management in the context of a European recycling society Comparing results and uncertainties in a life cycle perspective.pdf} -} - -@article{Lazarevic2017, - title = {Narrating Expectations for the Circular Economy: {{Towards}} a Common and Contested {{European}} Transition}, - author = {Lazarevic, David and Valve, Helena}, - year = {2017}, - journal = {Energy Research and Social Science}, - volume = {31}, - number = {October 2016}, - pages = {60--69}, - publisher = {{Elsevier}}, - issn = {22146296}, - doi = {10.1016/j.erss.2017.05.006}, - abstract = {The European Union (EU) has set its sights on becoming a circular economy, envisaging a transition that implies systemic changes in natural resource transformations and material flows; and offering a response to what is commonly labelled as the `take-make-dispose' conventional economic model. What does the transition toward a circular economy entail and what can it do? This paper analyses the emergence and mobilisation of expectations that are shaping the EU transition to a circular economy. It traces the narrative elements through which the circular economy is configured through an analysis of position papers presented to inform the debate on the European Commission's circular economy package. Expectations for the circular economy are articulated as: (1) a perfect circle of slow material flows; (2) a shift from consumer to user; (3) growth through circularity and decoupling; and (4) a solution to European renewal. Extending boundaries of what is `in' benefits actors driving the circular economy as, in the short-term, they can actively support a deliberately vague, but uncontroversial, circular economy. On the one hand, the expectations present a strong sense of a collective `we', on the other hand we are yet to see the contentions and contestations being full playing out.}, - isbn = {2214-6296}, - keywords = {Circular economy,Expectations,Narratives,Transition}, - file = {/Users/fabio/Zotero/storage/RE9NJCGQ/Narrating expectations for the circular economy- Towards a common and contested European transition.pdf} -} - -@article{Le2014, - title = {A {{Generative Network Model}} for {{Product Evolution}}}, - author = {Le, Qize and Sha, Zhenghui and Panchal, Jitesh H}, - year = {2014}, - month = jan, - journal = {Journal of Computing and Information Science in Engineering}, - volume = {14}, - number = {1}, - pages = {011003}, - issn = {1530-9827}, - doi = {10.1115/1.4025856}, - abstract = {Modeling the structure and evolution of products is important from the standpoint of improving quality and maintainability. With the increasing popularity of open-source processes for developing both software and physical systems, there is a need to develop computational models of product evolution in such dynamic product developments scenarios. Existing studies on the evolution of products involve modeling products as networks, taking snapshots of the structure at different time steps, and comparing the structural characteristics. Such approaches are limited because they do not capture the underlying dynamics through which products evolve. In this paper, we take a step toward addressing this gap by presenting a generative network model for product evolution. The generative model is based on different mechanisms though which networks evolve\textemdash addition and removal of nodes, addition and removal of links. The model links local network observations to global network structures. It is utilized for modeling and analyzing the evolution of a software product (Drupal) and a physical product (RepRap) developed by open source processes. For the software product, the generated networks are compared with the actual product structures using various network measures including average degree, density, clustering coefficients, average shortest path, propagation cost, clustered cost, and degree distributions. For the physical product, the product evolution is analyzed in terms of the proposed mechanisms. The proposed model has three general applications: longitudinal studies of a product's evolution, cross-sectional studies of evolution of different products, and predictive analyzes.}, - keywords = {complex networks,degree-based models,evolution,product structure}, - file = {/Users/fabio/Zotero/storage/EPX26UTB/Le, Sha, Panchal - 2014 - A Generative Network Model for Product Evolution.pdf} -} - -@article{Le2018, - title = {Extracting Features for Manufacture of Parts from Existing Components Based on Combining Additive and Subtractive Technologies}, - author = {Le, Van Thao and Paris, Henri and Mandil, Guillaume}, - year = {2018}, - journal = {International Journal on Interactive Design and Manufacturing}, - volume = {12}, - number = {2}, - pages = {525--536}, - publisher = {{Springer Paris}}, - issn = {19552505}, - doi = {10.1007/s12008-017-0395-y}, - abstract = {The development of additive manufacturing (AM) technology provides the possibility of producing complex parts (including internal complex features) that are difficult to manufacture by machining. However, AM technologies also have some limitations, such as low-dimensional accuracy and long production times. Recently, combining additive manufacturing technology with CNC machining is gaining significant attention. This combination not only takes advantages of individual techniques, but also minimizes their disadvantages. In this paper, taking into account consolidated benefits of such technique combination, an alternative remanufacturing strategy is proposed. The strategy allows end-of-life parts (or existing parts) to be reused directly for manufacture of new parts (or final parts) without involving the material recycling stage. In addition, the final part is intended for another product, namely the existing part has a new life and new usage in its life cycle. To achieve the geometry and quality of final part, a sequence of additive, subtractive manufacturing and inspection operations will be generated. For this purpose, additive manufacturing features and machining features are first identified and extracted from the available information of the existing and final parts. This paper particularly focuses on a feature extraction approach, which is developed using the knowledge of additive manufacturing and CNC machining processes, technological requirements, and available resources. The major criteria and constraints have been defined and applied during the feature extraction process. The extracted features and their relationships will be used as the inputs for designing the process planning. Finally, a case study is used to illustrate the proposed approach. \textcopyright{} 2017 Springer-Verlag France}, - isbn = {19552513 (ISSN)}, - keywords = {Additive manufacturing,Feature,Machining,Process planning,Remanufacturing} -} - -@article{Le2019, - title = {Applications of Functionalized Polyethylene Terephthalate Aerogels from Plastic Bottle Waste}, - author = {Le, Duyen Khac and Leung, Ryan I.H. and Er, Alan S.R. and Zhang, Xiwen and Tay, Xiang J. and Thai, Quoc Ba and {Phan-Thien}, Nhan and Duong, Hai M.}, - year = {2019}, - month = dec, - journal = {Waste Management}, - volume = {100}, - pages = {296--305}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.09.031} -} - -@article{Le2020, - title = {Methyltrimethoxysilane-Coated Recycled Polyethylene Terephthalate Aerogels for Oil Spill Cleaning Applications}, - author = {Le, Duyen Khac and Ng, Gek Nian and Koh, Hong Wei and Zhang, Xiwen and Thai, Quoc Ba and {Phan-Thien}, Nhan and Duong, Hai Minh}, - year = {2020}, - month = jan, - journal = {Materials Chemistry and Physics}, - volume = {239}, - publisher = {{Elsevier Ltd}}, - issn = {02540584}, - doi = {10.1016/j.matchemphys.2019.122064}, - urldate = {2020-04-08}, - abstract = {Recycled polyethylene terephthalate (rPET) aerogels are successfully developed using rPET fibers from plastic bottle wastes for oil spill cleaning applications. The rPET aerogels are formed via a freeze-drying process with polyvinyl alcohol (PVA) and glutaraldehyde (GA) crosslinking agents. After coating with methyltrimethoxysilane (MTMS), the MTMS-coated rPET aerogels exhibit hydrophobicity with a water contact angle of 133\textdegree\textendash 141\textdegree{} for oil absorption applications. The effects of the rPET fiber concentrations, fiber deniers and cross-linker contents on the oil absorption performance of the rPET aerogels are comprehensively quantified. The 0.5 wt\% rPET aerogels show the largest oil absorption capacity of 79.4 g/g, approximately 7.0 and 3.2 times better than commercial sorbents, polypropylene pads and polypyrrole sponges, respectively and slightly larger than 0.5 wt\% cellulose-based aerogels from paper waste. From the oil absorption kinetics of the rPET aerogels quantified by the pseudo-first and pseudo\textendash second order models, the 0.5 wt\% rPET aerogels can absorb oil up to 3.0 times faster than cellulose-based aerogels. In addition, rPET aerogels are also demonstrated to have a good absorption capacity for different organic solvents. These establish the novelty of the contribution and demonstrate that rPET aerogels can be promising materials for absorption applications due to their high absorption capacities, environmental-friendly and cost-effective fabrication method.}, - keywords = {Absorption,Bottle waste,Oil spill,PET,Plastic aerogel}, - file = {/Users/fabio/Zotero/storage/XXCYSYNY/full-text.pdf} -} - -@article{LealFilho2019, - title = {The Role of Higher Education Institutions in Sustainability Initiatives at the Local Level}, - author = {Leal Filho, Walter and Vargas, Valeria Ruiz and Salvia, Amanda Lange and Brandli, Luciana Londero and Pallant, Eric and Klavins, Maris and Ray, Subhasis and Moggi, Sara and Maruna, Marija and Conticelli, Elisa and Ayanore, Martin Amogre and Radovic, Vesela and Gupta, Bhumika and Sen, Salil and Pa{\c c}o, Arminda and Michalopoulou, Eleni and Saikim, Fiffy Hanisdah and Koh, Hock Lye and Frankenberger, Fernanda and Kanchanamukda, Wasan and da Cunha, D{\^e}nis Ant{\^o}nio and Akib, Noor Adelyna Mohammed and Clarke, Amelia and Wall, Tony and Vaccari, Mentore}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {233}, - pages = {1004--1015}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.059}, - urldate = {2020-05-21}, - abstract = {Universities are central players and important economic actors in many regions, and many of them are, in general, nationally and internationally active in respect of matters related to sustainable development. But there is a paucity of research which examines their contributions towards sustainability efforts at the local level, i.e. in the places they are situated. This paper addresses this need, by reporting on a qualitative study deploying a Matrix, which allows an analysis and reporting of regional sustainable development initiatives of a set of 22 universities in industrialised and developing countries. Recommendations to enhance their role are provided, including the importance of pursuing partnerships and joint initiatives, understanding the need of local communities, and making their know-how more widely available. The scientific value of this research is related to the understanding of how the interaction between universities and local communities happens and by shedding light to this topic, it supports universities to improve their own actions. Its implications are two-fold: it demonstrates the potential of universities as local players and outlines the range of activities they may engage with, and which may allow them to act as pillars to local sustainability initiatives.}, - keywords = {Engagement,Higher education,Local initiatives,Sustainability} -} - -@article{lealfilhoLivingLabsContext2022, - title = {Living Labs in the Context of the {{UN}} Sustainable Development Goals: State of the Art}, - shorttitle = {Living Labs in the Context of the {{UN}} Sustainable Development Goals}, - author = {Leal Filho, Walter and Ozuyar, Pinar Gokcin and Dinis, Maria Alzira Pimenta and Azul, Anabela Marisa and Alvarez, Mar{\'i}a Garcia and {da Silva Neiva}, Samara and Salvia, Amanda Lange and Borsari, Bruno and Danila, Andreea and Vasconcelos, Claudio Ruy}, - year = {2022}, - month = nov, - journal = {Sustainability Science}, - issn = {1862-4057}, - doi = {10.1007/s11625-022-01240-w}, - urldate = {2022-12-02}, - abstract = {This paper reports on a comprehensive study, which has investigated the approaches, methods and tools being deployed in implementing living labs among higher education institutions (HEIs) around the world. Two methods were employed. First, a bibliometric analysis of the current emphasis given to living labs in a sustainable development context and in the implementation of the Sustainable Development Goals (SDGs). Second, an empirical study aimed at identifying the use levels of living labs at HEIs. This was accomplished through an analysis of selected case studies that showcased successful approaches to SDGs implementation with living labs, and resulted in a framework for action. There are three main findings from these analyses. The first is that the multidisciplinary character of living labs in the context of sustainable development needs to be considered, to maximize their impacts. Second, most of the studied living labs focus on SDGs 4 and 11, which deal with providing quality education and ensuring the sustainable development of cities and communities. Third, the challenges encountered in the implementation of living labs refer to (1) the complexities in institutional administration, (2) the tensions between different groups of interest that need to be addressed by enhanced communication, and (3) the necessity to pay attention to the demand of using sustainability and innovation as a strategy in the operations of living labs. The paper draws from the experiences and lessons learned and suggests specific measures, which will improve the use of living labs as more systemic tools towards the implementation of the SDGs.}, - langid = {english}, - keywords = {Academic research,Collaboration,Innovation,Institutional sustainability profile,Learning opportunities}, - file = {/Users/fabio/Zotero/storage/SZP9ZKFU/Leal Filho et al_2022_Living labs in the context of the UN sustainable development goals.pdf} -} - -@article{lealfilhoPovertyCentralBarrier2021, - title = {Poverty: {{A}} Central Barrier to the Implementation of the {{UN Sustainable Development Goals}}}, - author = {Leal Filho, Walter and Lovren, Violeta Orlovic and Will, Markus and Salvia, Amanda Lange and Frankenberger, Fernanda}, - year = {2021}, - month = nov, - journal = {Environmental Science \& Policy}, - volume = {125}, - pages = {96--104}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.08.020}, - urldate = {2021-09-15} -} - -@article{lealfilhoTrendsScientificPublishing2021, - title = {Trends in Scientific Publishing on Sustainability in Higher Education}, - author = {Leal Filho, Walter and Wall, Tony and Salvia, Amanda Lange and Frankenberger, Fernanda and Hindley, Ann and Mifsud, Mark and Brandli, Luciana and Will, Markus}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {296}, - pages = {126569}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126569}, - urldate = {2021-03-14}, - abstract = {It is widely acknowledged that research and publications in peer reviewed journals offer important metrics in describing the academic outputs of higher education institutions on one hand, and their societal impacts on the other. Peer review is a well-tested method for quality control and has been successfully deployed over many decades in academic journals worldwide. But despite the fact that publications on matters related to sustainable development offer solid evidence of academic activity and excellence, there is a dearth of literature in this field. In order to address this need, the European School of Sustainability Science and Research (ESSSR) and the Inter-University Sustainable Development Research Programme (IUSDRP) have undertaken the World Survey on Sustainability Publishing and Research in Higher Education (WSSSP-HEI). The paper has two main aims. The first is to document and showcase trends in scientific publishing on matters related to sustainable development. The second aim is to contribute to a greater understanding of this rapidly growing field, by describing the latest developments and the role played by some of the journals active in this area. Consistent with these aims, this paper focuses on publications on sustainability in higher education, describes the methods used in the study and some of its results. It can be seen that despite the intrinsic value of research on sustainable development in higher education as a whole, and of publications in this field in particular, such practices are not as widely developed as one could expect. This paper discusses the possible reasons and also outlines some measures via which higher education institutions may be able to take more advantage of the many opportunities that publishing on sustainability offers to them.}, - keywords = {Higher education,Publications,Publish or perish,Sustainability articles,Sustainability books} -} - -@article{lealfilhoWhenAlarmBells2023, - title = {When the Alarm Bells Ring: {{Why}} the {{UN}} Sustainable Development Goals May Not Be Achieved by 2030}, - shorttitle = {When the Alarm Bells Ring}, - author = {Leal Filho, Walter and Viera Trevisan, La{\'i}s and Simon Rampasso, Izabela and Anholon, Rosley and Pimenta Dinis, Maria Alzira and Londero Brandli, Luciana and Sierra, Javier and Lange Salvia, Amanda and Pretorius, Rudi and Nicolau, Melanie and Paulino Pires Eustachio, Jo{\~a}o Henrique and Mazutti, Janaina}, - year = {2023}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {407}, - pages = {137108}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137108}, - urldate = {2023-05-01}, - abstract = {When the United Nations (UN) Sustainable Development Goals (SDGs) were agreed upon by the UN General Assembly in 2015, and subsequently endorsed by most UN Member States, there was a sense of optimism in respect of their timely implementation by 2030. This optimism has now become a concern. This is due to the fact that a combination of unfavourable circumstances and crises have so severely undermined the pursuit of the SDGs, that there are serious concerns about the probability of their achievement by 2030. This paper reports on an expert-driven literature review of the implementation of the SDGs and a bibliometric analysis, aimed at identifying some of the issues which have been slowing SDGs' progress. Based on the information gathered, it suggests some specific measures which may be deployed, in order to accelerate their implementation by 2030.}, - langid = {english}, - keywords = {2030 Agenda,Barriers,Crises,Sustainable Development Goals,United Nations}, - file = {/Users/fabio/Zotero/storage/7CDL5T9B/Leal Filho et al_2023_When the alarm bells ring.pdf;/Users/fabio/Zotero/storage/5KZD3SDQ/S0959652623012660.html} -} - -@article{lebdiouiNatureinspiredInnovationPolicy2022, - title = {Nature-Inspired Innovation Policy: {{Biomimicry}} as a Pathway to Leverage Biodiversity for Economic Development}, - shorttitle = {Nature-Inspired Innovation Policy}, - author = {Lebdioui, Amir}, - year = {2022}, - month = dec, - journal = {Ecological Economics}, - volume = {202}, - pages = {107585}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2022.107585}, - urldate = {2022-09-18}, - abstract = {One of the most important challenges of the 21st century is the quest for economic development models that respect the planet's ecosystem. Rather than imposing our industrial systems on nature, why not let nature influence our industrial and innovation systems? From wind turbine blades to bullet trains and solar cells, many of the technologies we rely on today have been inspired by solutions found in nature. Although relatively widespread in the fields of architecture and engineering, biomimicry/biomimetics remains largely overlooked in economics, public policy, and development studies. This is paradoxical because the world's remaining biodiversity stock-a knowledge bank of solutions to both current and unknown challenges- is largely held in developing economies and can be leveraged as a source of inspiration for -and entry door to- industrial innovation. This paper, therefore, investigates the relevance of biomimicry in the formulation of sustainable development strategies in biodiverse developing countries and maps out the national policy landscapes that can advance it. Several findings arise from this study. First, despite the exponential growth of biomimicry as a field and our understanding of its economic impact, what drives nature-inspired innovation remains elusive. Second, the biomimicry innovation landscape is dominated by industrialised economies that have relied on proactive policy interventions, while virtually no developing country has adopted biomimicry as an innovation strategy, consolidating the exploitation of the biodiversity in the developing world by firms in high-income nations. Third, by drawing on empirical evidence from a selection of Latin American countries, this paper shows that while biomimicry presents tremendous opportunities to leapfrog towards high value-added knowledge-intensive activities by using local biodiversity and related expertise as factor endowments, policy, and institutional factors have led to the persistence of important coordination failures that hinder the expansion and commercialization of biomimicry-based R\&D. This paper concludes by discussing the public policies needed to support the integration of developing nations at the innovation frontier through biomimicry.}, - langid = {english}, - keywords = {Biodiversity,Biomimicry,Economic upgrading,Ecosystem services,Innovation,Sustainability economics}, - file = {/Users/fabio/Zotero/storage/V43NQAUG/Lebdioui_2022_Nature-inspired innovation policy.pdf;/Users/fabio/Zotero/storage/8W5UNAFP/S0921800922002476.html} -} - -@article{LeBlanc2006, - title = {Vehicle Routing Concepts in the Closed-Loop Container Network of {{ARN}}\textemdash a Case Study}, - author = {{le Blanc}, Ieke and {van Krieken}, Maaike and Krikke, Harold and Fleuren, Hein}, - year = {2006}, - month = jan, - journal = {OR Spectrum}, - volume = {28}, - number = {1}, - pages = {53--71}, - issn = {0171-6468}, - doi = {10.1007/s00291-005-0003-6} -} - -@article{LeBourhis2013, - title = {Sustainable Manufacturing: Evaluation and Modeling of Environmental Impacts in Additive Manufacturing}, - author = {Bourhis, Florent Le and Kerbrat, Olivier and Hascoet, Jean-Yves and Mognol, Pascal}, - year = {2013}, - month = dec, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {69}, - number = {9-12}, - pages = {1927--1939}, - issn = {0268-3768}, - doi = {10.1007/s00170-013-5151-2}, - abstract = {Cleaner production and sustainability are of crucial importance in the field of manufacturing processes where great amounts of energy and materials are being consumed. Nowadays, additive manufacturing technologies such as direct additive laser manufacturing allow us to manufacture functional products with high added value. Insofar as environmental considerations become an important issue in our society, as well as legislation regarding environment become prominent (Normalization ISO 14 044), the environmental impact of those processes have to be evaluated in order to make easier its acceptance in the industrial world. Some studies have been conducted on electric consumption of machine tools (standby consumption, in process consumption, etc.) but only a few studies take into account the whole existing environmental flows (material, fluids, electricity). This paper presents a new methodology where all flows consumed (material, fluids, electricity) are considered in the environmental impact assessment. This method coupled a global view required in a sustainable approach and an accurate evaluation of flow consumption in the machine. The methodology developed is based on a predictive model of flow consumption defined from the manufacturing path and CAD model of the part which will be produce. In order to get an accurate model of the process, each feature of the machine is modeled. The goal of this work is to integrate this model into the design loop for additive manufacturing parts. \textcopyright{} Springer-Verlag London 2013.}, - isbn = {0017001351512}, - keywords = {additive manufacturing,assessment,direct laser additive,environmental impact,life cycle,manufacturing,powder projection}, - file = {/Users/fabio/Zotero/storage/6HZUDUQ5/Le Bourhis et al. - 2013 - Sustainable manufacturing evaluation and modeling of environmental impacts in additive manufacturing.pdf} -} - -@article{LeBourhis2014, - title = {Predictive {{Model}} for {{Environmental Assessment}} in {{Additive Manufacturing Process}}}, - author = {Le Bourhis, Florent and Kerbrat, Olivier and Dembinski, Lucas and Hascoet, Jean-Yves and Mognol, Pascal}, - year = {2014}, - journal = {Procedia CIRP}, - volume = {15}, - pages = {26--31}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2014.06.031}, - urldate = {2014-06-23}, - abstract = {Additive Manufacturing is an innovative way to produce parts. However its environmental impact is unknown. To ensure the development of additive manufacturing processes it seems important to develop the concept of DFSAM (Design for Sustainable Additive Manufacturing). In fact, one of the objectives of environmental sustainable manufacturing is to minimize the whole flux consumption (electricity, material and fluids) during manufacturing step. To achieve this goal, it is interesting to get a predictive model of consumptions, integrated in the design step, allowing to evaluate the product's environmental impact during the manufacturing step. This paper presents a new methodology for electric, fluids and raw material consumptions assessment for additive manufacturing processes, in particular for a direct metal deposition process. The methodology will help engineers to design parts optimized for additive manufacturing with an environmental point of view.}, - isbn = {2212-8271}, - keywords = {additive laser manufacturing,Additive laser manufacturing,additive manufacturing,Additive Manufacturing,design for sustainable additive,Design for sustainable additive manufacturing,environmental sustainability,Environmental sustainability,manufacturing}, - file = {/Users/fabio/Zotero/storage/CZ97MMGM/Le Bourhis et al. - 2014 - Predictive Model for Environmental Assessment in Additive Manufacturing Process.pdf;/Users/fabio/Zotero/storage/IFG7GVB9/Le Bourhis et al. - 2014 - Predictive Model for Environmental Assessment in Additive Manufacturing Process(2).pdf} -} - -@article{lebrumentTriggeringParticipationSmart2021, - title = {Triggering Participation in Smart Cities: {{Political}} Efficacy, Public Administration Satisfaction and Sense of Belonging as Drivers of Citizens' Intention}, - author = {LEBRUMENT, Norbert and {ZUMBO-LEBRUMENT}, C{\'e}drine and ROCHETTE, Corinne and ROULET, Thomas J.}, - year = {2021}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {171}, - pages = {120938}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120938}, - urldate = {2021-06-18} -} - -@article{lechnerExploringRegionalRepair2021, - title = {Exploring a Regional Repair Network with a Public Funding Scheme for Customer Repairs: {{The}} `{{GRAZ}} Repariert'-Case}, - author = {Lechner, Gernot and Wagner, Marcel Josef and Diaz Tena, Anna and Fleck, Christopher and Reimann, Marc}, - year = {2021}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {288}, - pages = {125588}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125588}, - urldate = {2021-01-01}, - file = {/Users/fabio/Zotero/storage/26SFZ5XN/full-text.pdf} -} - -@article{Leder2020, - title = {Influential Factors for Value Creation within the {{Circular Economy}}: {{Framework}} for {{Waste Valorisation}}}, - author = {Leder, Nadine and Kumar, Maneesh and Rodrigues, Vasco Sanchez}, - year = {2020}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {158}, - pages = {104804}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104804}, - urldate = {2020-05-08}, - abstract = {The present trend towards greener and less-waste intensive production methods, has started to establish the idea of a Circular Economy. However, in achieving circularity, obstacles need to be overcome and new business models need to be developed. One of these business models is Waste Valorisation. Waste Valorisation focuses on the transformation of alleged waste, by-products or residue into valuable material. This paper aims to establish the current view on Waste Valorisation models and explore any influential factors within this circular business model through the lens of social capital theory. The findings are based on a focus group discussion with academics, practitioners, and policy makers. Results indicate, collaborative aspects aid to create value within this specific business model, as well as technology can act as a facilitator for collaboration between stakeholders in realizing the benefits of Waste Valorisation model. Based on the findings, a theoretical framework was developed which can be used as a guide to develop further research on Waste Valorisation.}, - keywords = {Circular business model,Focus group,Framework,Valorisation} -} - -@article{LeDuigou2008, - title = {Effect of Recycling on Mechanical Behaviour of Biocompostable Flax/Poly(l-Lactide) Composites}, - author = {Le Duigou, Antoine and Pillin, Isabelle and Bourmaud, Alain and Davies, Peter and Baley, Christophe}, - year = {2008}, - month = sep, - journal = {Composites Part A: Applied Science and Manufacturing}, - volume = {39}, - number = {9}, - pages = {1471--1478}, - issn = {1359835X}, - doi = {10.1016/j.compositesa.2008.05.008}, - urldate = {2014-07-15}, - keywords = {a,b,composite,e,flax fibres,mechanical properties,plla,recycling}, - file = {/Users/fabio/Zotero/storage/G2ALZVF6/Effect of recycling on mechanical behaviour of biocompostable flaxpoly(l-lactide) composites.pdf;/Users/fabio/Zotero/storage/JAP96KBT/Effect of recycling on mechanical behaviour of biocompostable flaxpoly(l-lactide) composites(2).pdf} -} - -@article{Lee2005, - title = {Optimization of Rapid Prototyping Parameters for Production of Flexible {{ABS}} Object}, - author = {Lee, B.H. and Abdullah, J. and Khan, Z.a.}, - year = {2005}, - month = oct, - journal = {Journal of Materials Processing Technology}, - volume = {169}, - number = {1}, - pages = {54--61}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2005.02.259}, - urldate = {2013-03-10}, - keywords = {flexibe abs,fused deposition modeling,rapid prototyping,taguchi method}, - file = {/Users/fabio/Zotero/storage/YEJ52HAC/Optimization of rapid prototyping parameters for production of flexible ABS object.pdf} -} - -@article{Lee2005a, - title = {Scaffold Fabrication by Indirect Three-Dimensional Printing}, - author = {Lee, Min and Dunn, James C Y and Wu, Benjamin M.}, - year = {2005}, - journal = {Biomaterials}, - volume = {26}, - number = {20}, - pages = {4281--4289}, - issn = {01429612}, - doi = {10.1016/j.biomaterials.2004.10.040}, - abstract = {Three-dimensional printing (3DP) has been employed to fabricate porous scaffolds by inkjet printing liquid binder droplets onto particulate matter. Direct 3DP, where the final scaffold materials are utilized during the actual 3DP process, imposes several limitations on the final scaffold structure. This study describes an indirect 3DP protocol, where molds are printed and the final materials are cast into the mold cavity to overcome the limitations of the direct technique. To evaluate the resolution available in this technique, scaffolds with villi features (500 ??m diameter, 1 mm height) were produced by solvent casting into plaster molds, followed by particulate leaching. Scanning electron microscope (SEM) showed highly open, well interconnected, uniform pore architecture (???100-150 ??m). The ability of these scaffolds to support intestinal epithelial cell (IEC6) culture was investigated in vitro. IEC6 cells attached to scaffolds uniformly in vitro and grew preferentially in the villi region. To exploit the freeform nature of this technique with large pore size, anatomically shaped zygoma scaffolds with 300-500 ??m interconnected pores were produced and characterized. Indirect 3DP provides an alternative method to complement other direct solid freeform fabrication methods. ?? 2004 Elsevier Ltd. All rights reserved.}, - isbn = {0142-9612}, - pmid = {15683652}, - keywords = {Scaffolds,Solid freeform fabrication,Three-dimensional printing,Tissue engineering}, - file = {/Users/fabio/Zotero/storage/8MK56G9T/Lee, Dunn, Wu - 2005 - Scaffold fabrication by indirect three-dimensional printing.pdf} -} - -@article{Lee2007, - title = {Measurement of Anisotropic Compressive Strength of Rapid Prototyping Parts}, - author = {Lee, C.S. and Kim, S.G. and Kim, H.J. and Ahn, S.H.}, - year = {2007}, - month = jun, - journal = {Journal of Materials Processing Technology}, - volume = {187--188}, - pages = {627--630}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2006.11.095}, - urldate = {2013-03-18}, - keywords = {3d printer system,anisotropy,compressive strength,fused deposition modeling,nano composite deposition system,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/ZWXGU2UQ/Measurement of anisotropic compressive strength of rapid prototyping parts.pdf} -} - -@article{Lee2016, - title = {Creative Workplace Characteristics and Innovative Start-up Companies}, - author = {Lee, Young S.}, - year = {2016}, - journal = {Facilities}, - volume = {34}, - number = {7/8}, - pages = {413--432}, - issn = {0263-2772}, - doi = {10.1108/F-06-2014-0054}, - abstract = {Abstract Purpose \textendash{} This study aims to investigate the characteristics of the physical work environment that are known and used in practice to promote creativity for innovative start-up workplaces. The first part of the study identified these characteristics from a content and visual analysis, and examined the current state of implementation of these characteristics in the work environments of innovative start-up companies. The second part of the study examined criticalness and practicality of these characteristics in the workplace with a group of experts in the workplace design, evaluation and management. Design/methodology/approach \textendash{} A content and visual analysis for written and visual images was conducted to identify a comprehensive list of characteristics of the physical work environment critical to creativity of the workplace. With the seven characteristics identified, an instrument was developed and interviews were conducted to assess the physical work environments of 22 innovative start-up companies in Michigan. Following up the interviews, an expert group was formed with 26 professionals including architects, interior designers, facility managers and CEOs. A survey was conducted with them to understand the significance and implementation issues among the seven characteristics. Findings \textendash{} The most frequently incorporated characteristics in the innovative start-up companies in Michigan were spaces for idea generation, technology interface for collaboration and spaces for a short mental break or social hangout. The three most important physical work environmental characteristics for companies to produce creative, innovative ideas and products/services for growth and market competitiveness were balanced layout, technology interface for collaboration and spaces for idea generation. Originality/value \textendash{} The study provides a comprehensive framework to evaluate creative workplace regarding the physical environment. It also offers insights on the work environments of the innovative start-up companies for increased creativity and innovation performance in the workplace. Keywords Workplace, Design, Creative work environmental attributes, Creative workplace, Creativity and innovation, Work environment of innovative start-ups Paper type Research paper}, - arxiv = {A luxury brand management framework built from historical review and case study analysis}, - isbn = {0320150151}, - pmid = {42012058}, - keywords = {creative work environmental attributes,creative workplace,creativity and innovation,design,paper type research paper,start-ups,work environment of innovative,workplace} -} - -@article{Lee2018, - title = {Development and {{Evaluation}} of a {{Distributed Recycling System}} for {{Making Filaments Reused}} in {{Three-Dimensional Printers}}}, - author = {Lee, Dongoh and Lee, Younghun and Lee, Kyunghyun and Ko, Youngsu and Kim, Namsu}, - year = {2019}, - month = feb, - journal = {Journal of Manufacturing Science and Engineering}, - volume = {141}, - number = {2}, - pages = {021007}, - issn = {1087-1357}, - doi = {10.1115/1.4041747}, - abstract = {Due to an increase in the number of applications for 3D printers, the use of thermoplastic resins such as acrylonitrile butadiene styrene (ABS) and poly lactic acid (PLA), which are typical filament materials for fused filament fabrication (FFF) type 3D printers, has also increased significantly. This trend has produced an interest in recycled filaments, both to reduce the manufacturing cost of fabricated products and to lower greenhouse gas emissions. Also, this recycling system is very useful to make functional filament such as highly conducting or high strength filament by combining carbon nanotube or polydopamine during recycling process. This study presents the design procedures of system for making recycled filaments for 3D printers from waste polymer. The system integrates four main parts for recycling filament: a shredder, which crushes polymer waste into small pieces; an extruder, which extrudes filament from the crushed pieces; a sensing and control component, which regulates the diameter of the extruded filament via a closed-loop control system, and a spooler. Additionally, the dimensional accuracy, the mechanical strength of pristine, and recycled filaments were investigated and compared.}, - file = {/Users/fabio/Zotero/storage/C4QTUPSP/Development and Evaluation of a Distributed Recycling System for Making Filaments Reused in Three-Dimensional Printers.pdf} -} - -@article{Lee2019, - title = {The Role of {{R}}\&{{D}} and Input Trade in Productivity Growth: Innovation and Technology Spillovers}, - author = {Lee, Dongyeol}, - year = {2019}, - month = feb, - journal = {The Journal of Technology Transfer}, - issn = {0892-9912}, - doi = {10.1007/s10961-019-09717-0} -} - -@article{Lee2019a, - title = {Trends in {{3D Printing Technology}} for {{Construction Automation Using Text Mining}}}, - author = {Lee, Dongyoun and Kim, Hakmin and Sim, Joonhyeok and Lee, Dongmin and Cho, Hunhee and Hong, Daehie}, - year = {2019}, - month = may, - journal = {International Journal of Precision Engineering and Manufacturing}, - volume = {20}, - number = {5}, - pages = {871--882}, - issn = {2234-7593}, - doi = {10.1007/s12541-019-00117-w} -} - -@article{Lee2019b, - title = {How {{Collective Intelligence Fosters Incremental Innovation}}}, - author = {{Lee} and {Jin}}, - year = {2019}, - month = aug, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {3}, - pages = {53}, - issn = {2199-8531}, - doi = {10.3390/joitmc5030053}, - abstract = {The study aims to identify motivational factors that lead to collective intelligence and understand how these factors relate to each other and to innovation in enterprises. The study used the convenience sampling of corporate employees who use collective intelligence from corporate panel members (n = 1500). Collective intelligence was found to affect work process, operations, and service innovation. When corporate employees work in an environment where collective intelligence (CI) is highly developed, work procedures or efficiency may differ depending on the onset of CI. This raises the importance of CI within an organization and implies the importance of finding means to vitalize CI. This study provides significant implications for corporations utilizing collective intelligence services, such as online communities. Firstly, such corporations vitalize their services by raising the quality of information and knowledge shared in their workplaces; and secondly, contribution motivations that consider the characteristics of knowledge and information contributors require further development.} -} - -@article{Lee2019c, - title = {Emerging {{Technology}} and {{Business Model Innovation}}: {{The Case}} of {{Artificial Intelligence}}}, - author = {Lee, Jaehun and Suh, Taewon and Roy, Daniel and Baucus, Melissa}, - year = {2019}, - month = jul, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {3}, - pages = {44}, - issn = {2199-8531}, - doi = {10.3390/joitmc5030044}, - abstract = {Artificial intelligence (AI) has been altering industries as evidenced by Airbnb, Uber and other companies that have embraced its use to implement innovative new business models. Yet we may not fully understand how this emerging and rapidly advancing technology influences business model innovation. While many companies are being made vulnerable to new competitors equipped with AI technology, this study attempts to focus on the proactive side of the use of AI technology to drive business model innovation. Describing AI technology as the catalyst of business model innovation, this study sheds light on contingent factors shaping business model innovation initiated by the emerging technology. This study first provides a brief overview of AI, current issues being tackled in developing AI and explains how it transforms business models. Our case study of two companies that innovated their business models using AI shows its potential impact. We also discuss how executives can create an innovative AI-based culture, which rephrases the process of AI-based business model innovation. Companies that successfully capitalize on AI can create disruptive innovation through their new business models and processes, enabling them to potentially transform the global competitive landscape.} -} - -@article{Lee2019d, - title = {Critical {{Factors Affecting Sustainable Success}} of {{Social Service Systems}}}, - author = {Lee, Mikyoung and Majer, Marko and Kim, Boyoung}, - year = {2019}, - month = sep, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {4}, - pages = {77}, - issn = {2199-8531}, - doi = {10.3390/joitmc5040077}, - abstract = {Increasing demand for various social services in accordance with the global social change in time requires a systematic and efficient system based on a user-oriented policy operation method beyond an administrative operation method of social services. Therefore, this study aimed to present a specific direction for the development of the social service system by empirically deriving and discussing the critical factors that can lead to sustainable success of the social service system. To this end, 12 factors in 3 areas were critically analyzed through a questionnaire survey and analysis on the basis of the Analytic Hierarchy Process (AHP) method for the social service workers and users of the 50 Plus Foundation, an organization that helps the elderly in Seoul to continue their social participation. The analysis results confirmed that the service delivery system was the most important factor among the service delivery system, service administration, and service network, and, in particular, factors for users' active system access, such as accessibility and participation possibility, were the most influential factors for sustainable success of the social service system. Ultimately, unlike in the past, system development and direction should be sought by considering service users rather than a one-sided policy approach of the government for the development and operation of the social service system.} -} - -@article{Lee2021, - title = {Techno-Ecologically Synergistic Food-Energy-Water Systems Can Meet Human and Ecosystem Needs}, - author = {Lee, Kyuha and Khanal, Sami and Bakshi, Bhavik R.}, - year = {2021}, - month = jul, - journal = {Energy and Environmental Science}, - volume = {14}, - number = {7}, - pages = {3700--3716}, - publisher = {{The Royal Society of Chemistry}}, - issn = {17545706}, - doi = {10.1039/d1ee00843a}, - urldate = {2021-09-03}, - abstract = {Sustainable provisioning of energy to society requires consideration of the nexus between food-energy-water (FEW) flows while meeting human needs and respecting nature's capacity to provide goods and services. In this work, we explore the FEW nexus of conventional and techno-ecologically synergistic (TES) systems by evaluating combinations of various technological, agricultural, and ecological strategies from the viewpoints of electricity generation, food production, life cycle water use, carbon footprint, nutrient runoff, corporate profitability, and societal well-being. We evaluate activities related to power generation (coal and gas extraction and use, transportation options, cooling technologies, solar panels, wind turbines), food production (farming with and without tillage), waste utilization (carbon dioxide capture and conversion to hydrocarbons, green hydrogen), and ecological restoration (forests and wetlands). Application of this framework to the Muskingum River watershed in Ohio, U.S.A. indicates that seeking synergies between human and natural systems can provide innovative solutions that improve the FEW nexus while making positive contributions to society with greater respect for nature's limits. We show that the conventional engineering approach of relying only on technological approaches for meeting sustainability objectives can have limited environmental and societal benefits while reducing profitability. In contrast, techno-ecologically synergistic design between agricultural systems and wetlands can reduce nutrient runoff with little compromise in other goals. Additional synergies between farming and photovoltaic systems along with the use of wetlands can further improve the FEW nexus while reducing CO2 and nutrient emissions, with a relatively small compromise in corporate profitability. These results should motivate further work on innovative TES designs that can provide "win-win"solutions for meeting global energy needs in an environmentally and socially beneficial manner.}, - file = {/Users/fabio/Zotero/storage/UMMJT83J/Lee, Khanal, Bakshi - 2021 - Techno-ecologically synergistic food–energy–water systems can meet human and ecosystem needs.pdf;/Users/fabio/Zotero/storage/UWM9T6RG/Lee, Khanal, Bakshi - 2021 - Techno-ecologically synergistic food-energy-water systems can meet human and ecosystem needs †.pdf} -} - -@article{leeabaiEffectsCompostBin2022, - title = {The Effects of Compost Bin Design on Design Preference, Waste Collection Performance, and Waste Segregation Behaviors for Public Participation}, - author = {Leeabai, Nattapon and Areeprasert, Chinnathan and Siripaiboon, Chootrakul and Khaobang, Chanoknunt and Congsomjit, Danusorn and Takahashi, Fumitake}, - year = {2022}, - month = apr, - journal = {Waste Management}, - volume = {143}, - pages = {35--45}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.02.018}, - urldate = {2022-03-13} -} - -@article{leeChemicalRecyclingPlastic2021, - title = {Chemical Recycling of Plastic Waste via Thermocatalytic Routes}, - author = {Lee, Jechan and Kwon, Eilhann E. and Lam, Su Shiung and Chen, Wei-Hsin and Rinklebe, J{\"o}rg and Park, Young-Kwon}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {321}, - pages = {128989}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128989}, - urldate = {2021-09-21} -} - -@article{leeConspicuousInconspicuousRepair2021, - title = {Conspicuous and {{Inconspicuous}} Repair: {{A}} Framework for Situating Repair in Relation to Consumer Practices and Design Research}, - author = {Lee, Dr Thomas and {Wakefield-Rann}, Dr Rachael}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {294}, - pages = {126310}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126310}, - urldate = {2021-02-20} -} - -@article{leeDynamicSemanticNetwork2019, - title = {Dynamic Semantic Network Analysis for Identifying the Concept and Scope of Social Sustainability}, - author = {Lee, Keeheon and Jung, Hosang}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {233}, - pages = {1510--1524}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.390}, - urldate = {2020-06-07}, - abstract = {Social sustainability is important across disciplines in the era of Sustainable Development Goals (SDGs). However, many scholars note that its concept and scope are ambiguous regardless of public attention and importance. It limits the development of social sustainability research. Therefore, in this study, we introduce a data-driven approach for identifying the concept and scope of social sustainability. We apply dynamic semantic network analysis to the current social sustainability literature over time. This analysis partitions the diffusion of social sustainability in academia into several periods by detecting change points. It also builds semantic networks periodically to discover the concept and scope in the network analysis perspective. Our result shows that social sustainability penetrated into disciplines with minimal innovation and high imitation rates. The concept of social sustainability has been changed several times by including the humanity of community and individuals during its diffusion. The scope of social sustainability has been enlarged but is densely intertwined. That is, social sustainability more concerns quality of life in a society, which is independent from economic and environmental sustainability. And thus, it considers human factors and social effects in a supply chain of products and services. This statement means that social sustainability developed to include the various values of humanity in our society that we should retain.}, - keywords = {Bass model,Change point detection,Co-keyword network,Diffusion,Network analysis,Social sustainability} -} - -@article{leeHierarchicalAnalysisBarriers2023, - title = {Hierarchical Analysis of Barriers in Additive Manufacturing Implementation with Environmental Considerations under Uncertainty}, - author = {Lee, Jocelyn Ke Yin and Gholami, Hamed and Medini, Khaled and Salameh, Anas A.}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {408}, - pages = {137221}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137221}, - urldate = {2023-05-01}, - abstract = {Notwithstanding additive manufacturing has been gaining momentum in the industry, particularly during the fourth industrial revolution, their widespread implementation as a disruptive production technology has brought impacts on the environment. Considering this issue, the research for this paper was built upon the discussion concerning life cycle assessment (LCA) adoption in implementing additive manufacturing (AM). The capability of LCA to achieve environmental goals is a vivid illustration of why it has given researchers and practitioners an extensive impetus. However, to actualize such an effective approach, it is necessary to identify and face the barriers impeding its implementation in AM. Thus, this research aims to identify, classify, and analyze the most critical barriers hindering LCA adoption in AM implementation. To do so, the fuzzy analytical hierarchy process, along with a comprehensive literature review and thorough interviews with the relevant experts, was used to achieve the research purposes. The results revealed twenty-two barriers within five classifications, where the lack of financial resources to conduct LCA study on AM is the most dominant barrier, followed by the lack of LCA expertise in the AM context and the lack of laws and directives for LCA application in AM, respectively. The findings would be useful to decision-makers to develop suitable mitigation strategies and make more informed decisions with individual and/or cluster concentrations. This study can be fruitfully exploited as a guiding reference since no article has hitherto discussed, identified, or analyzed barriers in the understudied area.}, - langid = {english}, - keywords = {Additive manufacturing,Automotive sector,Barriers,Environmental sustainability,Fuzzy AHP,Life cycle assessment,Sensitivity analysis}, - file = {/Users/fabio/Zotero/storage/IJBGEX9C/Lee et al_2023_Hierarchical analysis of barriers in additive manufacturing implementation with.pdf;/Users/fabio/Zotero/storage/6IDYJZW9/S0959652623013793.html} -} - -@article{leeLifeCycleAssessment2021, - title = {Life Cycle Assessment of Single-Use Surgical and Embedded Filtration Layer ({{EFL}}) Reusable Face Mask}, - author = {Lee, Amos Wei Lun and Neo, Edward Ren Kai and Khoo, Zi-Yu and Yeo, Zhiquan and Tan, Yee Shee and Chng, Shuyun and Yan, Wenjin and Lok, Boon Keng and Low, Jonathan Sze Choong}, - year = {2021}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {170}, - pages = {105580}, - publisher = {{Elsevier BV}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105580}, - urldate = {2021-04-29}, - abstract = {BACKGROUND: The outbreak of the COVID-19 pandemic has led to an unprecedented amount of face mask consumption around the world. The increase in face mask consumption has brought focus to their environmental impact. To keep up with the increased demand for face masks, different variations of reusable face masks such as the embedded filtration layer (EFL) reusable face mask have emerged in the market. This study quantifies the environmental impact of the EFL reusable face mask and the single-use surgical face mask. METHODS: The life cycle assessment (LCA) study of the entire value chain from cradle-to-grave is applied to each face mask. Both face masks are evaluated over 1 functional unit (FU) of 31 12-h days for a single person. The ReCiPe method with the Hierachist perspective was applied. A total of nine impact categories as well as the generated waste of each face mask are evaluated. RESULTS: The results show that for 1 functional unit, the use of single-use surgical face mask and EFL reusable face mask will contribute 0.580~kg CO(2)-eq and 0.338~kg CO(2)-eq to climate change and generate 0.004~kg and 0.0004~kg of waste respectively. CONCLUSION: Comparing both face masks, the EFL reusable face mask will have a lower emission of at least 30\% in terms of the generated waste and the impact categories considered, except for water depletion, freshwater eutrophication, marine eutrophication, and human toxicity.}, - file = {/Users/fabio/Zotero/storage/K2XC65RE/full-text.pdf} -} - -@article{leeMultiscaleConsequentialSustainable2019, - title = {Toward Multiscale Consequential Sustainable Process Design: {{Including}} the Effects of Economy and Resource Constraints with Application to Green Urea Production in a Watershed}, - author = {Lee, Kyuha and Ghosh, Tapajyoti and Bakshi, Bhavik R}, - year = {2019}, - doi = {10.1016/j.ces.2019.06.028}, - urldate = {2021-09-20}, - abstract = {h i g h l i g h t s The RCOT-P2P multiscale technology choice modeling framework is developed. The framework integrates process engineering, life cycle, and economy models. Market constraints are considered as a consequential approach. The framework is applied to the green urea production in the watershed. Results demonstrate how designs from the conventional approach can be misleading. a b s t r a c t Decisions made by approaches that only consider the environmental domain could result in unexpected outcomes due to burdens shifting to economic and social domains. These consequences could occur through the entire supply chain at multiple spatial scales. In this work, the process-to-planet (P2P) mul-tiscale modeling framework is integrated with the rectangular choice-of-technology (RCOT) consequen-tial approach. The resulting RCOT-P2P multiscale technology choice modeling framework takes account of market effects, such as economic resource constraints, as a consequential approach for designing engineering systems and their supply chain networks. The integrated modeling framework can represent different stakeholders' interests by considering engineering, environmental, and economic dimensions. The case study focuses on installation of a new green urea production system in a watershed where there are limited supplies of resources, such as water and land area. We identify how the adoption of new technologies could change and be limited by market constraints, as the urea demand increases. This multi-scale consequential framework is useful for modeling substitution effects of emerging technologies while considering market effects.}, - keywords = {Consequential modeling approach,Green urea production,Market effects,Multiple technology choices,Multiscale optimization,Supply chain network design}, - file = {/Users/fabio/Zotero/storage/2NSQTMGG/full-text.pdf} -} - -@article{Leenslag1987, - title = {High-Strength Poly(l-Lactide) Fibres by a Dry-Spinning/Hot-Drawing Process}, - author = {Leenslag, J.W. and Pennings, A.J.}, - year = {1987}, - month = sep, - journal = {Polymer}, - volume = {28}, - number = {10}, - pages = {1695--1702}, - issn = {00323861}, - doi = {10.1016/0032-3861(87)90012-7}, - urldate = {2014-04-14}, - keywords = {-fl,0 conditions,c,crystal transition,dry spinning,fibres,good,hot drawing,interrupted helix,l-lactide,poly,poor solvent mixtures,theoretical strength}, - file = {/Users/fabio/Zotero/storage/3D8LHA2E/Leenslag, Pennings - 1987 - High-strength poly(l-lactide) fibres by a dry-spinninghot-drawing process.pdf} -} - -@article{leeReviewDataAnalytics2021, - title = {A Review of Data Analytics in Technological Forecasting}, - author = {Lee, Changyong}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120646}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120646}, - urldate = {2021-02-14}, - abstract = {Technological forecasting (TF) has significantly benefited from data analytics over the past decades. However, little effort has been made to present an overview of data analytics in TF and discuss its key features and contributions. Consequently, there exist duplication of efforts, inconsistency in applications and a lack of understanding of the current state-of-the-art and common methodology frameworks. This study attempts to fill this research gap by conducting a review of the work on data analytics in TF published in leading journals in the field of technology and innovation management. We first develop a process-focused morphological matrix that provides a simple yet comprehensive view and enables the full spectrum of data analytics in TF to be examined. Specifically, the matrix consists of four dimensions and 12 factors: (1) awareness of TF contexts (objective, time horizon, field and level of analysis); (2) data collection and pre-processing (data source, data item and measure); (3) data analysis and validation (approach, methodology and performance evaluation); and (4) value creation (outcome and implication). A thorough presentation of the literature is then provided after the configurations of each article are identified. Accordingly, we also examine the practical implications of the process-focused morphological matrix and suggest future research directions in the field.}, - keywords = {Data analytics,Literature review,Process-focused morphological matrix,Technological forecasting} -} - -@article{leeTertiaryRecyclingPlastics2021, - title = {Tertiary Recycling of Plastics Waste: An Analysis of Feedstock, Chemical and Biological Degradation Methods}, - shorttitle = {Tertiary Recycling of Plastics Waste}, - author = {Lee, Alicia and Liew, Mei Shan}, - year = {2021}, - month = jan, - journal = {Journal of Material Cycles and Waste Management}, - volume = {23}, - number = {1}, - pages = {32--43}, - issn = {1611-8227}, - doi = {10.1007/s10163-020-01106-2}, - urldate = {2023-08-31}, - abstract = {Globally, there is rising awareness of the severity of the plastic waste problem, and the implications of plastics accumulation in the environment. Current methods of waste management are anticipated to be insufficient in mitigating the long-term negative impact on society and the environment. Plastics recycling is one of many solutions that have been proposed, one of the most ecologically-friendly, as well as holding great economic potential by its realization into a circular economy. The technological know-how already exists for a number of different methods for plastic recycling; however, they are broadly uneven in their implementation due to feasibility and cost issues. Here, we review and compare methods of tertiary recycling\textemdash that is, complete breakdown of plastics into its chemical component materials\textemdash and offer an analysis of the potential obstacles that have to be addressed to increase waste plastic recycling rates. While chemical recycling methods are simpler and are already pilot tested at an industrial level, biological recycling either via microorganisms or biological-derived enzymes are as yet unproven but highly promising technologies. Looking forward, trend shifts towards more ecologically-friendly processes will drive initiatives to close the loop on commercial plastic production.}, - langid = {english}, - keywords = {Micro-organisms,Plastic degradation,Polyethylene terephthalate}, - file = {/Users/fabio/Zotero/storage/83LR2IFT/Lee_Liew_2021_Tertiary recycling of plastics waste.pdf} -} - -@article{legenvreOpenHardwareWorthwhile2020, - ids = {Legenvre2020}, - title = {Is {{Open Hardware Worthwhile}}? {{Learning}} from {{Thales}}' {{Experience}} with {{RISC-V}}}, - shorttitle = {Is {{Open Hardware Worthwhile}}?}, - author = {Legenvre, Herv{\'e} and Kauttu, Pietari and Bos, Martin and Khawand, Roger}, - year = {2020}, - month = jul, - journal = {Research-Technology Management}, - volume = {63}, - number = {4}, - pages = {44--53}, - publisher = {{Routledge}}, - issn = {0895-6308}, - doi = {10.1080/08956308.2020.1762445}, - urldate = {2022-10-12}, - abstract = {OverviewIn this article we frame the concept of a hardware-rich open source ecosystem (H-ROSE) that generates software and hardware components. In an H-ROSE, the designs of some components are accessible under open source licenses, while other component designs remain proprietary. We describe seven adoption factors used by the multinational French firm Thales to assess the efficacy of RISC-V to design processors. Other companies can use these adoption factors to explore whether an open hardware initiative supported by an H-ROSE is worthwhile.}, - keywords = {Adoption factors,Ecosystems,H-ROSE,Open source,RISC-V}, - file = {/Users/fabio/Zotero/storage/8FGSZ6HI/Legenvre et al. - 2020 - Is Open Hardware Worthwhile Learning from Thales’.pdf} -} - -@article{lehmannLeveragingCircularEconomy2022, - title = {Leveraging the Circular Economy: {{Investment}} and Innovation as Drivers}, - author = {Lehmann, Carlotta and {Cruz-Jesus}, Frederico and Oliveira, Tiago and Dam{\'a}sio, Bruno}, - year = {2022}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {360}, - pages = {132146}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.132146}, - urldate = {2022-05-29} -} - -@article{leiCapitaResourceConsumption2012, - title = {Per Capita Resource Consumption and Resource Carrying Capacity: {{A}} Comparison of the Sustainability of 17 Mainstream Countries}, - author = {Lei, Kampeng and Zhou, Shaoqi}, - year = {2012}, - month = mar, - journal = {Energy Policy}, - volume = {42}, - pages = {603--612}, - publisher = {{Elsevier Ltd}}, - issn = {03014215}, - doi = {10.1016/j.enpol.2011.12.030}, - urldate = {2021-05-04}, - abstract = {Sustainability involves aspects of society, economy, and environment. Environmental sustainability is one of the most important factors to support global energy consumption and to absorb the pollution generated by human activities. Because emergy can be used to measure both money and energy flows in the same units, it provides a way to measure the real wealth of both natural and economic systems and the impact of human activities on these systems. A comparison of the carrying capacity of natural resources with the consumption of these resources at regional or global scales can provide a clear image of sustainability. To assess sustainability around the world, we used the National Environmental Accounting Database data for 102 nations (2008 data) to evaluate the resource consumption by 17 mainstream countries. Our results revealed that most of the countries consumed too many resources, thereby decreasing the overall global sustainability of the natural resources that sustain human society. Our results confirm previous predictions that to ensure long-term sustainability, it will be necessary to control population increases, reduce emergy consumption, and promote emergy efficiency. \textcopyright{} 2011.}, - keywords = {Carrying capacity,Emergy,Sustainability} -} - -@article{Leigh2012a, - title = {A Simple, Low-Cost Conductive Composite Material for {{3D}} Printing of Electronic Sensors.}, - author = {Leigh, Simon J and Bradley, Robert J and Purssell, Christopher P and Billson, Duncan R and a Hutchins, David}, - year = {2012}, - month = jan, - journal = {PloS one}, - volume = {7}, - number = {11}, - pages = {e49365}, - issn = {1932-6203}, - doi = {10.1371/journal.pone.0049365}, - urldate = {2013-11-07}, - abstract = {3D printing technology can produce complex objects directly from computer aided digital designs. The technology has traditionally been used by large companies to produce fit and form concept prototypes ('rapid prototyping') before production. In recent years however there has been a move to adopt the technology as full-scale manufacturing solution. The advent of low-cost, desktop 3D printers such as the RepRap and Fab@Home has meant a wider user base are now able to have access to desktop manufacturing platforms enabling them to produce highly customised products for personal use and sale. This uptake in usage has been coupled with a demand for printing technology and materials able to print functional elements such as electronic sensors. Here we present formulation of a simple conductive thermoplastic composite we term 'carbomorph' and demonstrate how it can be used in an unmodified low-cost 3D printer to print electronic sensors able to sense mechanical flexing and capacitance changes. We show how this capability can be used to produce custom sensing devices and user interface devices along with printed objects with embedded sensing capability. This advance in low-cost 3D printing with offer a new paradigm in the 3D printing field with printed sensors and electronics embedded inside 3D printed objects in a single build process without requiring complex or expensive materials incorporating additives such as carbon nanotubes.}, - pmid = {23185319}, - keywords = {Costs and Cost Analysis,Electric Conductivity,Electronics,Electronics: economics,Electronics: instrumentation,Plastics,Plastics: chemistry,Printing,Printing: economics,Printing: instrumentation}, - file = {/Users/fabio/Zotero/storage/9T5W2YXL/A simple, low-cost conductive composite material for 3D printing of electronic sensors.pdf} -} - -@article{Leigh2014, - title = {Using a Magnetite/Thermoplastic Composite in {{3D}} Printing of Direct Replacements for Commercially Available Flow Sensors}, - author = {Leigh, S J and Purssell, C P and Billson, D R and a Hutchins, D}, - year = {2014}, - journal = {Smart Materials and Structures}, - volume = {23}, - number = {9}, - pages = {095039}, - publisher = {{IOP Publishing}}, - issn = {0964-1726}, - doi = {10.1088/0964-1726/23/9/095039}, - file = {/Users/fabio/Zotero/storage/2M68QVEC/Leigh et al. - 2014 - Using a magnetitethermoplastic composite in 3D printing of direct replacements for commercially available flow sen.pdf} -} - -@article{Leipold2018, - title = {The Circular Economy and the Bio-Based Sector - {{Perspectives}} of {{European}} and {{German}} Stakeholders}, - author = {Leipold, Sina and {Petit-Boix}, Anna}, - year = {2018}, - journal = {Journal of Cleaner Production}, - volume = {201}, - pages = {1125--1137}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.08.019}, - abstract = {The European Union has recently introduced the 'circular economy' as a high-level strategy to move our societies beyond the limits to growth. In the eyes of European policy makers, we will reach a circular economy through business innovation or the promotion of existing sustainable business models based on circular economy principles. Yet, we know next to nothing about how European businesses perceive or take up this strategy and whether it contributes to business innovation or the promotion of sustainable business models. To fill this gap, this paper analyses the business community's view on the circular economy. It focuses on the bio-based sector as one of the most resource-intensive in Europe and scrutinizes EU level debates as well as business practices in Germany. Based on a document analysis and participant observation data, the results show that business stakeholders currently relate the circular economy predominantly to established practices and to technological business models. This leaves considerable room for innovation in areas like social or organizational business models. Yet, the directions and effects of current activities remain uncertain. Connecting the debates about the circular economy and the bioeconomy could benefit the discussion of these possible directions and their effects. As our results show, exploring the relation between the circular economy and the bioeconomy highlights the need to define which cycles contribute most to a sustainable future economy. Existing guidelines and standards developed for businesses have been criticized for lacking exactly this definition. Hence, strengthening the link between circular economy and bioeconomy debates may provide a crucial step towards defining the sustainability of the circular economy, thereby setting clear priorities for sustainable business practices.}, - keywords = {Bioeconomy,Business models,Circularity,Innovation,Transition}, - file = {/Users/fabio/Zotero/storage/Y66RWTQA/The circular economy and the bio-based sector - Perspectives ofEuropean and German stakeholders.pdf} -} - -@article{leipoldLessonsNarrativesResearch, - title = {Lessons, Narratives, and Research Directions for a Sustainable Circular Economy}, - author = {Leipold, Sina and {Petit-Boix}, Anna and Luo, Anran and Helander, Hanna and Simoens, Machteld and Ashton, Weslynne S. and Babbitt, Callie W. and Bala, Alba and Bening, Catharina R. and Birkved, Morten and Blomsma, Fenna and Boks, Casper and Boldrin, Alessio and Deutz, Pauline and Domenech, Teresa and Ferronato, Navarro and {Gallego-Schmid}, Alejandro and Giurco, Damien and Hobson, Kersty and Husgafvel, Roope and Isenhour, Cynthia and Kriipsalu, Mait and Masi, Donato and Mendoza, Joan Manuel F. and Milios, Leonidas and Niero, Monia and Pant, Deepak and Parajuly, Keshav and Pauliuk, Stefan and Pieroni, Marina P. P. and Richter, Jessika Luth and Saidani, Michael and Smol, Marzena and Peir{\'o}, Laura Talens and {van Ewijk}, Stijn and Vermeulen, Walter J. V. and Wiedenhofer, Dominik and Xue, Bing}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13346}, - urldate = {2023-01-15}, - abstract = {The current enthusiasm for the circular economy (CE) offers a unique opportunity to advance the impact of research on sustainability transitions. Diverse interpretations of CE by scholars, however, produce partly opposing assessments of its potential benefits, which can hinder progress. Here, we synthesize policy-relevant lessons and research directions for a sustainable CE and identify three narratives\textemdash optimist, reformist, and skeptical\textemdash that underpin the ambiguity in CE assessments. Based on 54 key CE scholars' insights, we identify three research needs: the articulation and discussion of ontologically distinct CE narratives; bridging of technical, managerial, socio-economic, environmental, and political CE perspectives; and critical assessment of opportunities and limits of CE science\textendash policy interactions. Our findings offer practical guidance for scholars to engage reflexively with the rapid expansion of CE knowledge, identify and pursue high-impact research directions, and communicate more effectively with practitioners and policymakers.}, - copyright = {\textcopyright{} 2022 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of International Society for Industrial Ecology.}, - langid = {english}, - keywords = {industrial ecology,narratives,policy relevance,research agenda,science policy,sustainability}, - file = {/Users/fabio/Zotero/storage/IPB3BIPJ/Leipold et al. - Lessons, narratives, and research directions for a.pdf;/Users/fabio/Zotero/storage/WL8CEBRC/jiec.html} -} - -@article{leipoldWeNeedCircular2021, - title = {Do We Need a `Circular Society'? {{Competing}} Narratives of the Circular Economy in the {{French}} Food Sector}, - author = {Leipold, Sina and Weldner, Kaja and Hohl, Marius}, - year = {2021}, - month = sep, - journal = {Ecological Economics}, - volume = {187}, - pages = {107086}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107086}, - urldate = {2021-05-17}, - file = {/Users/fabio/Zotero/storage/ZLYI68PR/full-text.pdf} -} - -@article{Leissner2019, - title = {Challenges and Opportunities for Reduction of Single Use Plastics in Healthcare: {{A}} Case Study of Single Use Infant Formula Bottles in Two {{Irish}} Maternity Hospitals}, - author = {Leissner, Sonja and {Ryan-Fogarty}, Yvonne}, - year = {2019}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {151}, - pages = {104462}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104462} -} - -@article{leite-moraesEnvironmentalImpactsIntegrated2023, - title = {Environmental Impacts in Integrated Production Systems: An Overview}, - shorttitle = {Environmental Impacts in Integrated Production Systems}, - author = {{Leite-Moraes}, Ariane Elias and Rossato, Fabr{\'i}cia Gladys and Susaeta, Andres and Binotto, Erlaine and Malafaia, Guilherme Cunha and De Azevedo, Denise Barros}, - year = {2023}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {420}, - pages = {138400}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2023.138400}, - urldate = {2023-08-31}, - abstract = {Production systems that do not use environmentally sustainable practices are being pressured to change their production strategies. Conventional agricultural practices are associated with negative impacts, such as extensive land use, soil contamination, pesticide usage, and greenhouse gas emissions, resulting in environmental damage and resource depletion. To address this, integrated production systems offer sustainable strategies with numerous benefits including efficient land use, animal welfare promotion, carbon and nitrogen sequestration, improved microclimatic conditions, increased soil organic matter, and reduced erosion. These systems combine agricultural crops, livestock, and forestry, promoting ecological interactions and are common in small farms in developing countries, but can also be implemented in different regions and situations. This article explores evaluations of environmental impacts of integrated production systems, highlighting the ongoing interest in this field through a systematic literature review with the support of the Biblioshiny software as a research method. The literature has revealed barriers in the initial investments of these systems, as well as the need for adequate knowledge and management to ensure efficient integration of activities and scaled-up productions. Overall, future research is necessary to assess underexplored or unexplored categories of environmental impacts and inform effective policies for mitigating negative impacts and promoting positive ones.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/GRQD6PLL/Leite-Moraes et al. - 2023 - Environmental impacts in integrated production sys.pdf} -} - -@article{LeMarec2014, - title = {Influence of Melt Processing Conditions on Poly(Lactic Acid) Degradation: {{Molar}} Mass Distribution and Crystallization}, - author = {Le Marec, Pierre Erwan and Ferry, Laurent and Quantin, Jean-Christophe and B{\'e}n{\'e}zet, Jean-Charles and Bonfils, Fr{\'e}d{\'e}ric and Guilbert, St{\'e}phane and Bergeret, Anne}, - year = {2014}, - journal = {Polymer Degradation and Stability}, - volume = {110}, - pages = {353--363}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2014.10.003}, - abstract = {The degradation of poly(lactic acid) (PLA) during thermal\textendash mechanical processing was studied and the influence of processing conditions on degradation rate was determined by size exclusion chromatography coupled with multi-angle light scattering (SEC\textendash MALS). A two-parameter model accounting for both chain scission and recombination processes was used to describe the experimentally observed molar mass distribution. The degradation and recombination rate constants were determined for undried and dried PLA. It was highlighted that the effect of processing temperature (in the 170\textendash 210 \textdegree C range), processing time (until 30 min) and shear rate (rotor speed varying from 0 to 150 rpm) on molar mass reduction can be relatively well simulated insofar as self-heating related to the mechanical energy conversion into heat was taken into account. The influence of melt processing on the thermal behaviour of PLA was also investigated using temperature modulated differential scanning calorimetry (TMDSC). It was evidenced that the molar mass reduction affects the crystallizability of PLA. Cold crystallization temperature progressively decreases with decreasing molar mass and the metastable {$\alpha$}' phase is formed in place of the stable {$\alpha$} phase. The {$\alpha{'}$} phase can be partially converted into {$\alpha$} form during melting giving rise to a double-melting peak. The two peaks can be separated using reversing and non-reversing signals confirming that recrystallization of the {$\alpha{'}$} form occurs.}, - keywords = {Crystallization,Melt processing,Molar mass,Poly(lactic acid) (PLA),Simulation,Thermal degradation}, - file = {/Users/fabio/Zotero/storage/I4K94J7C/Le Marec et al. - 2014 - Influence of melt processing conditions on poly(lactic acid) degradation Molar mass distribution and crystalliz.pdf} -} - -@article{Leminen2012, - ids = {leminen2012}, - title = {Living {{Labs}} as {{Open-Innovation Networks}}}, - author = {Leminen, Seppo and Westerlund, Mika and Nystr{\"o}m, Anna-Greta}, - year = {2012}, - journal = {Technology Innovation Management Review}, - volume = {2}, - number = {9}, - pages = {6--11}, - publisher = {{Carleton University}}, - issn = {1927-0321}, - doi = {10.22215/timreview602}, - abstract = {Living labs bring experimentation out of companies' R\&D departments to real-life environ- ments with the participation and co-creation of users, partners, and other parties. This study discusses living labs as four different types of networks characterized by open innov- ation: utilizer-driven, enabler-driven, provider-driven, and user-driven. The typology is based on interviews with the participants of 26 living labs in Finland, Sweden, Spain, and South Africa. Companies can benefit from knowing the characteristics of each type of liv- ing lab; this knowledge will help them to identify which actor drives the innovation, to anti- cipate likely outcomes, and to decide what kind of role they should play while "living labbing". Living labs are networks that can help them create innovations that have a super- ior match with user needs and can be upscaled promptly to the global market.}, - file = {/Users/fabio/Zotero/storage/4F3VS8CT/Living Labs as open-innovation networks.pdf;/Users/fabio/Zotero/storage/TX6QQCLL/full-text.pdf} -} - -@article{Leminen2017, - title = {Categorization of {{Innovation Tools}} in {{Living Labs Categorization}} of {{Innovation Tools}} in {{Living Labs}}}, - author = {Leminen, Seppo and Westerlund, Mika}, - year = {2017}, - volume = {7}, - number = {February}, - pages = {15--25} -} - -@article{leminenWhatAreLiving2015, - title = {Q\&{{A}}. {{What Are Living Labs}}?}, - author = {Leminen, Seppo}, - year = {2015}, - month = sep, - journal = {Technology Innovation Management Review}, - volume = {5}, - number = {9}, - pages = {29--35}, - publisher = {{Carleton University}}, - doi = {10.22215/timreview928}, - urldate = {2021-06-10}, - file = {/Users/fabio/Zotero/storage/8FLPF3FH/full-text.pdf} -} - -@article{lemstraIndustryTertiaryLiterature2023, - title = {Industry 4.0: A Tertiary Literature Review}, - shorttitle = {Industry 4.0}, - author = {Lemstra, Mary Anny Moraes Silva and {de Mesquita}, Marco Aur{\'e}lio}, - year = {2023}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {186}, - pages = {122204}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.122204}, - urldate = {2022-12-12}, - abstract = {Industry 4.0 has become one of the most discussed subjects in academic and professional fields. The number of articles published is large and continues to increase, introducing new issues, concepts, methods, and technologies. Many review articles deal with specific issues and not always with the necessary rigor, making a more general understanding of the subject difficult. Motivated by the large volume of literature, this study makes a tertiary review of Industry 4.0 (i4.0), identifying the main concepts, methods, and technologies. The study is guided by three research questions: What are the literature reviews on i4.0? What are the research questions of these reviews? What are the main results of i4.0 reviews? The reviewed articles are systematic review articles indexed in the Scopus and Web of Science databases. This study presents a descriptive analysis of the review articles (46 articles) and a second descriptive analysis of the references cited in them (1542 articles). In content analysis, we grouped the articles into three classes: conceptual articles, articles on enabling technologies, and articles that address operations management in i4.0. The reviewed articles show the multidisciplinary nature of the topic and the still relative scarcity of studies on its application in companies.}, - langid = {english}, - keywords = {Industry 4.0,Smart factory,Systematic literature review,Tertiary study}, - file = {/Users/fabio/Zotero/storage/UHY8CXFB/Lemstra_de Mesquita_2023_Industry 4.pdf;/Users/fabio/Zotero/storage/5AAENNWI/S0040162522007259.html} -} - -@article{lengDevelopmentConicalScrewbased2019, - title = {The Development of a Conical Screw-Based Extrusion Deposition System and Its Application in Fused Deposition Modeling with Thermoplastic Polyurethane}, - author = {Leng, Jie and Wu, Junjie and Chen, Ning and Xu, Xiang and Zhang, Jie}, - year = {2019}, - month = nov, - journal = {Rapid Prototyping Journal}, - volume = {26}, - number = {2}, - pages = {409--417}, - issn = {1355-2546, 1355-2546}, - doi = {10.1108/RPJ-05-2019-0139}, - urldate = {2022-09-26}, - abstract = {Purpose \textendash{} This paper aims to develop an integrated and portable desktop 3D printer using direct extruding technology to expand applied material field. Different from conventional fused deposition modeling (FDM) which uses polymer filaments as feedstock, the developed system can fabricate products directly using polymer pellets. And its printing properties are also investigated.}, - langid = {english}, - file = {/Users/fabio/Library/CloudStorage/OneDrive-Bibliothèquespartagées-UniversitedeLorraine/Lorraine Fab Living Lab - GF-8 OS-3D print muilti Recycling/The development of a conical screw-based extrusion deposition system and its application in fused deposition modeling with thermoplastic polyuretane.pdf} -} - -@inproceedings{lenoirRapidTraditionalVirtual2006, - title = {Rapid, Traditional, and Virtual: {{Prototypes}} in the Undergraduate Curriculum}, - booktitle = {Proceedings of 2006 {{ASME International Mechanical Engineering Congress}} and {{Exposition}}, {{IMECE2006}} - {{Mechanical Engineering Education}}}, - author = {Lenoir, Joel}, - year = {2006}, - month = dec, - pages = {337--343}, - publisher = {{American Society of Mechanical Engineers (ASME)}}, - doi = {10.1115/IMECE2006-14651}, - urldate = {2021-02-16}, - abstract = {The Mechanical Engineering (ME) faculty at Western Kentucky University (WKU) has developed a curricular plan to balance the strengths and weaknesses of three types of design prototyping: rapid, traditional, and virtual. Rapid prototyping refers to any of the modern 3D printing tools, such as Fused Deposition Modeling. Traditional prototyping has been defined as primarily machined parts, ranging from simple fabricated parts to CNC machined components. Virtual prototyping is used to describe designs that exist only in the digital domain as parts and assemblies in a 3D drawing program. Over the entire four years of the WKU ME curriculum, students work on a range of projects that allow them to utilize all three types of prototypes. The ME Freshman Experience allows students to blend the study of design methodologies with basic instruction in machine tools. Each student designs, builds, and tests their own air-powered steam engine. Sophomore Design finds the students working not only on a virtual design project, but also a more extended design-build-test project focused on experimentation. Junior design blends an externally sponsored virtual design along with the ASME Regional Student Competition (RSC). As with the RSC, Capstone Design in the senior year allows students to use a balance of all three types of prototyping as they judge appropriate and/or requested by their external sponsor. Design projects utilizing rapid and traditional prototyping resources require a large commitment by faculty and staff for support. A balance between time, resources, and level of student effort must be maintained, but careful planning can lead to improved student design performance. Virtual prototyping can appear to be easier to manage, but student expertise in creating fidelity between digital drawings and the desired physical parts varies widely. The deficiencies can show up when creating assemblies, but students can often mask the errors. The most important aspect of all these prototyping activities is the need for continual interaction between students, faculty, and staff. Students do not usually possess an innate project management ability, but experience has shown that strong project management skills are necessary for successful prototyping activities. All persons involved in the efforts must understand the prototyping facilities available, the time and resources necessary to utilize them effectively, and the reasonable expectations of the course effort. Students can gain understanding through repeated course exposure, but faculty must present a consistent voice with respect to the technologies available. Copyright \textcopyright{} 2006 by ASME.}, - isbn = {0-7918-3790-4}, - keywords = {Computer numerical control machine tools,Errors,Machine tools,Project management,Rapid prototyping} -} - -@article{Leone2018, - title = {The {{Ratatouille}} Paradox. {{An}} Inductive Study of Creativity in Haute Cuisine}, - author = {Leone, Ludovica}, - year = {2018}, - month = nov, - journal = {Technovation}, - issn = {01664972}, - doi = {10.1016/j.technovation.2018.11.003}, - file = {/Users/fabio/Zotero/storage/8EEIVVKT/The Ratatouille paradox. An inductive study of creativity in haute cuisine.pdf} -} - -@article{lerouxSmartTerritoriesIoT2022, - title = {Smart Territories and {{IoT}} Adoption by Local Authorities: {{A}} Question of Trust, Efficiency, and Relationship with the Citizen-User-Taxpayer.}, - author = {Leroux, Erick and Pupion, Pierre-Charles}, - year = {2022}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {174}, - pages = {121195}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121195}, - urldate = {2021-09-21} -} - -@misc{LessonsNarrativesResearch2021, - title = {Lessons, Narratives and Research Directions for a Sustainable Circular Economy}, - year = {2021}, - month = jul, - doi = {10.21203/rs.3.rs-429660/v1}, - urldate = {2022-10-07}, - abstract = {The current enthusiasm for circular economy (CE) offers a unique opportunity to advance the impact of research on sustainability transitions. Diverse interpretations of CE by scholars, however, produce partly opposing assessments of its potential benefits, which can hinder progress. Here, we s...}, - howpublished = {https://www.researchsquare.com}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/MXD3ZAJ8/2021_Lessons, narratives and research directions for a sustainable circular economy.pdf;/Users/fabio/Zotero/storage/297THMLN/v1.html} -} - -@inproceedings{Letcher2014, - title = {Material {{Property Testing}} of {{3D-Printed Specimen}} in {{PLA}} on an {{Entry-Level 3D Printer}}}, - booktitle = {Volume {{2A}}: {{Advanced Manufacturing}}}, - author = {Letcher, Todd and Waytashek, Megan}, - year = {2014}, - month = nov, - pages = {V02AT02A014}, - publisher = {{American Society of Mechanical Engineers}}, - doi = {10.1115/IMECE2014-39379}, - isbn = {978-0-7918-4643-8}, - keywords = {IMECE2014-39379}, - file = {/Users/fabio/Zotero/storage/D9MUGE9Q/Letcher, Waytashek - 2014 - Material Property Testing of 3D-Printed Specimen in PLA on an Entry-Level 3D Printer.pdf} -} - -@inproceedings{Letcher2015, - title = {Experimental Study of Mechanical Properties of Additively Manufactured Abs Plastic as a Function of Layer Parameters}, - booktitle = {{{ASME International Mechanical Engineering Congress}} and {{Exposition}}, {{Proceedings}} ({{IMECE}})}, - author = {Letcher, Todd and Rankouhi, Behzad and Javadpour, Sina}, - year = {2015}, - month = mar, - volume = {2A-2015}, - publisher = {{American Society of Mechanical Engineers (ASME)}}, - doi = {10.1115/IMECE2015-52634}, - urldate = {2021-01-15}, - abstract = {In this study, a preliminary effort was undertaken to represent the mechanical properties of a 3D printed specimen as a function of layer number, thickness and raster orientation by investigating the correlation between the mechanical properties of parts manufactured out of ABS using Fused Filament Fabrication (FFF) with a commercially available 3D printer, Makerbot Replicator 2x, and the printing parameters, such as layer thickness and raster orientation, were considered. Specimen were printed at raster orientation angles of 0\textdegree, 45\textdegree{} and 90\textdegree. Layer thickness of 0.2 mm was chosen to print specimens from a single layer to 35 layers. Samples were tested using an MTS Universal Testing Machine with extensometer to determine mechanical strength characteristics such as modulus of elasticity, ultimate tensile strength, maximum force and maximum elongation as the number of layers increased. Results showed that 0\textdegree{} raster orientation yields the highest mechanical properties compared to 45\textdegree{} and 90\textdegree{} at each individual layer. A linear relationship was found between the number of layers and the maximum force for all three orientations, in other words, maximum force required to break specimens linearly increased as the number of layers increased. The results also found the elastic modulus and maximum stress to increase as the number of layers increased up to almost 12 layers. For samples with more than 12 layers, the elastic modulus and maximum stress still increased, but at a much slower rate. These results can help software developers, mechanical designers and engineers reduce manufacturing time, material usage and cost by eliminating unnecessary layers that do not increase the ultimate stress of the material by improving material properties due to the addition of layers.}, - isbn = {978-0-7918-5735-9}, - keywords = {Additive manufacturing,Elastic moduli,Engineers,Manufacturing,Strength (Materials),Tensile strength} -} - -@article{Leutenecker-Twelsiek2016, - title = {Considering {{Part Orientation}} in {{Design}} for {{Additive Manufacturing}}}, - author = {{Leutenecker-Twelsiek}, Bastian and Klahn, Christoph and Meboldt, Mirko}, - year = {2016}, - journal = {Procedia CIRP}, - volume = {50}, - pages = {408--413}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2016.05.016}, - abstract = {Additive Manufacturing (AM) is established not only in prototyping, but also in serial production of end-use products. To use the full potential of the production technology the restrictions of current additive manufacturing processes (like support structures in Selective Laser Melting) must be considered in the design process. Especially the compliance with design rules from early design stages on is important in AM serial production, due to production quantities and the resulting scale effect. The part orientation in the build space has a strong influence on many quality characteristics. In order to use the full potential and to consider the restrictions from the start, a design guideline is necessary to support the whole design process. For this purpose, this paper presents a framework for design guidelines. The framework distinguishes between process characteristics, design principles and design rules; each supporting the designer during different stages of the design process. Furthermore, the paper examines the influence of part orientation in existing design rules and elaborates its importance. Based on this result, the design principle "early determination of part orientation" is presented, which includes a process for determining the part orientation in early stage of the design process. In addition, a design process for additive manufactured parts is demonstrated on an extensive showcase, following the guideline framework and including the principle for early determination of part orientation. The presented framework proved to be helpful in the design process and will be used in the future to collect more process characteristics, design principles and rules.}, - isbn = {2212-8271}, - keywords = {Additive Manufacturing,Design for Additive Manufacturing,Design Process,Part Orientation}, - file = {/Users/fabio/Zotero/storage/TGMPSV5N/Considering Part Orientation in Design for Additive Manufacturing.pdf} -} - -@article{Leuven1988, - title = {Progress in {{Additive Manufacturing}} and {{Rapid Prototyping}}}, - author = {Kruth, J.-P. and Leu, M.C. and Nakagawa, T.}, - year = {1998}, - month = jan, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {47}, - number = {2}, - pages = {525--540}, - issn = {00078506}, - doi = {10.1016/S0007-8506(07)63240-5}, - urldate = {2013-11-25}, - file = {/Users/fabio/Zotero/storage/A36INMAU/Progress in Additive Manufacturing and Rapid Prototyping.pdf} -} - -@article{levanenFrugalInnovationMidst2022, - title = {Frugal Innovation in the Midst of Societal and Operational Pressures}, - author = {Lev{\"a}nen, Jarkko and Hossain, Mokter and Wierenga, Marleen}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - pages = {131308}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131308}, - urldate = {2022-03-14} -} - -@article{Levy2003, - title = {{{RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING}} ({{LM}}) {{TECHNOLOGIES}}, {{STATE OF THE ART AND FUTURE PERSPECTIVES}}}, - author = {Levy, Gideon N and Schindel, Ralf and Kruth, J.P.}, - year = {2003}, - month = jan, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {52}, - number = {2}, - pages = {589--609}, - issn = {00078506}, - doi = {10.1016/S0007-8506(07)60206-6}, - urldate = {2013-11-15}, - keywords = {manufacturing,rapid,tooling}, - file = {/Users/fabio/Zotero/storage/AYX7BXAN/RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES.pdf} -} - -@article{Lewandowski2016, - title = {Designing the Business Models for Circular Economy-towards the Conceptual Framework}, - author = {Lewandowski, Mateusz}, - year = {2016}, - journal = {Sustainability (Switzerland)}, - volume = {8}, - number = {1}, - eprint = {1011.1669v3}, - pages = {1--28}, - issn = {20711050}, - doi = {10.3390/su8010043}, - abstract = {Switching from the current linear model of economy to a circular one has recently attracted increased attention from major global companies e.g., Google, Unilever, Renault, and policymakers attending the World Economic Forum. The reasons for this are the huge financial, social and environmental benefits. However, the global shift from one model of economy to another also concerns smaller companies on a micro-level. Thus, comprehensive knowledge on designing circular business models is needed to stimulate and foster implementation of the circular economy. Existing business models for the circular economy have limited transferability and there is no comprehensive framework supporting every kind of company in designing a circular business model. This study employs a literature review to identify and classify the circular economy characteristics according to a business model structure. The investigation in the eight sub-domains of research on circular business models was used to redefine the components of the business model canvas in the context of the circular economy. Two new components\textemdash the take-back system and adoption factors\textemdash have been identified, thereby leading to the conceptualization of an extended framework for the circular business model canvas. Additionally, the triple fit challenge has been recognized as an enabler of the transition towards a circular business model. Some directions for further research have been outlined, as well.}, - archiveprefix = {arxiv}, - isbn = {2071-1050}, - pmid = {112471054}, - keywords = {Business model design,Business models,Circular business model,Circular economy,Sustainable business model}, - file = {/Users/fabio/Zotero/storage/SELQYBA8/Designing the Business Models for Circular Economy—Towards the Conceptual Framework.pdf} -} - -@article{Lewis2005b, - title = {The {{Organizational Innovation Laboratory}}}, - author = {Lewis, Michael and Moultrie, James}, - year = {2005}, - journal = {Creativity and Innovation Management}, - volume = {14}, - number = {1}, - pages = {73--83}, - issn = {0963-1690}, - doi = {10.1111/j.1467-8691.2005.00327.x}, - abstract = {Organizational `innovation laboratories', dedicated facilities for encouraging creative behaviours and supporting innovative projects, have received scant academic attention despite their increasing popularity with a range of different practitioners. This paper develops an initial theoretical explanation of the phenomenon, based upon notions of organizational learning and dynamic capabilities. This framework is then used as the basis for analysing the structure, infrastructure, benefits and dis-benefits of three UK-based laboratory facilities (mass service, government department, academic institution). Preliminary conclusions suggest that the `innovation laboratory' can offer real benefits for organizations: reinforcing corporate commitment to innovation and creativity by providing a physical manifestation of dynamic capability and double-loop learning concepts. Although the physical design of the space is central to its functionality \textendash{} emphasizing dislocation from day-to-day activity, eliminating hierarchy, encouraging participation \textendash{} direct facilitation remains critical to successful operation. There are also dis-benefits associated with what can be substantial financial investments and there is some evidence that such facilities can have a relatively short useful lifespan. Given the limited nature of the empirical base, the paper concludes with some specific suggestions for further work.}, - isbn = {09631690}, - pmid = {16224291}, - file = {/Users/fabio/Zotero/storage/XGEQTRCG/The Organizational Innovation Laboratory.pdf} -} - -@article{Lhoste2020, - title = {Can Do-It-Yourself Laboratories Open up the Science, Technology, and Innovation Research System to Civil Society?}, - author = {Lhoste, Evelyne F.}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120226}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120226}, - urldate = {2020-08-28} -} - -@article{Li2002, - title = {Composite {{Modeling}} and {{Analysis}} for {{Fabrication}} of {{FDM Prototypes}} with {{Locally Controlled Properties}}}, - author = {Li, L. and Sun, Q. and Bellehumeur, C. and Gu, P.}, - year = {2002}, - month = jan, - journal = {Journal of Manufacturing Processes}, - volume = {4}, - number = {2}, - pages = {129--141}, - issn = {15266125}, - doi = {10.1016/S1526-6125(02)70139-4}, - file = {/Users/fabio/Zotero/storage/EDMPBQLH/Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties.pdf} -} - -@inproceedings{Li2017, - title = {A Multi-Dimensional Assessment System for Technology Readiness Levels}, - booktitle = {2017 4th {{International Conference}} on {{Systems}} and {{Informatics}} ({{ICSAI}})}, - author = {Li, Shanqing and Xing, Xiaozhao and Du, Shengmei}, - year = {2017}, - month = nov, - volume = {2018-Janua}, - pages = {798--802}, - publisher = {{IEEE}}, - doi = {10.1109/ICSAI.2017.8248394}, - abstract = {Technology readiness levels are widely used to indicate maturities of technologies. Traditional calculators assign a scalar from 1 to 9 to describe how mature a technology is. The level 1 is the lowest level and 9 is the highest level. However, this method cannot provide further details about each level. This paper presents an assessment system to calculate technology readiness levels from seven dimensions including requirement, design, implementation, verification, configuration, risk and safety. Besides, this system also provides a management scheme for complicated technologies with a divide-and-conquer strategy. A web-based application is developed to demonstrate the usability and effectiveness of our system.}, - isbn = {978-1-5386-1107-4}, - keywords = {B/S architecture,critical technology elements,multi-dimensional assessment system,technology readiness levels}, - file = {/Users/fabio/Zotero/storage/363FBA2K/A Multi-dimensional Assessment System for Technology Readiness Levels .pdf} -} - -@article{Li2018, - title = {Facilitating the Discovery of Relevant Studies on Risk Analysis for Three-Dimensional Printing Based on an Integrated Framework}, - author = {Li, Munan and Porter, Alan L.}, - year = {2018}, - journal = {Scientometrics}, - volume = {114}, - number = {1}, - pages = {277--300}, - publisher = {{Springer Netherlands}}, - issn = {15882861}, - doi = {10.1007/s11192-017-2570-0}, - abstract = {In an accurate and timely manner, capturing the risk signals for a specific emerging technology from academic publications is important to facilitate risk governance and to reduce the potential negative impact on socioeconomic systems. In the past decade, three-dimensional printing (3D printing) has become a promising emerging technology. To identify the relevant research on risk analysis for 3D printing, ''term clumping'' on ''risk analysis'' is explored using a quantitative method, and an integrated framework for risk identification is proposed with regard to 3D printing. This method involves a variation of TF*IDF and several new metrics for a Boolean query of the literature. The empirical results for the risk analysis studies of 3D printing show that, to date, very little attention has been paid to the relevant topics. However, although the risk signals of 3D printing are still weak and dispersed in many different categories, the potential threats to human health, cyber-security, and the environment are revealed in some facets. This enables initiation of strategies for anticipatory governance, involving science and technology policies and regulations.}, - isbn = {1119201725700}, - keywords = {3D printing,Emerging technology,Risk analysis,TF*IDF}, - file = {/Users/fabio/Zotero/storage/4RI4Z6F2/Facilitating the discovery of relevant studies on risk analysis for three-dimensional printing based on an integrated framework.pdf} -} - -@article{Li2019, - title = {Sharing Economy\textendash Based Service Triads: {{Towards}} an Integrated Framework and a Research Agenda}, - author = {Li, Dun and Liu, Guoquan and Jia, Fu and Sun, Hui}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {218}, - pages = {1031--1044}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.019}, - abstract = {Sharing economy has gained momentum in recent years. In this paper, a concept and a synthesised conceptual framework are developed for Sharing Economy-based Service Triad (SEST). Service triads have increasingly become an interesting topic in supply chain management literature. The study adopts a systematic literature review method carrying out content analysis of 100 peer-reviewed journal article focused on triad and sharing economy in order to propose a concept and develop a conceptual development of SEST. Case examples identified from secondary sources are used to illustrate the model. Based on the literature review and case example, the research first coins the term `Sharing Economy\textendash based Service Triad' (SEST) by differentiating it from traditional manufacturing triads and manufacturing service triads. Then, building on social-capital and balance theories, the study develops a conceptual framework, which proposes two types of strategy for sharing-economy platforms (commitment- and control based platform strategies). These strategies reveal five service-triad structures/archetypes, which lead to different outcomes (e.g., service quality and social capital), which eventually lead to triple bottom line performance and avoid negative externalities. Finally, the study argues that SEST should not only follow economic logic, i.e., economic benefits but also adopt a social and environmental sustainability logic given the negative externalities.}, - file = {/Users/fabio/Zotero/storage/K9EHXLFY/Sharing economy–based service triads- Towards an integrated framework and a research agenda.pdf} -} - -@article{Li2019a, - title = {{{4D Printing}} of {{Recyclable Lightweight Architectures Using High Recovery Stress Shape Memory Polymer}}}, - author = {Li, Ang and Challapalli, Adithya and Li, Guoqiang}, - year = {2019}, - journal = {Scientific Reports}, - volume = {9}, - number = {1}, - pages = {1--13}, - publisher = {{Springer US}}, - issn = {20452322}, - doi = {10.1038/s41598-019-44110-9}, - abstract = {High-performance lightweight architectures, such as metallic microlattices with excellent mechanical properties have been 3D printed, but they do not possess shape memory effect (SME), limiting their usages for advanced engineering structures, such as serving as a core in multifunctional lightweight sandwich structures. 3D printable self-healing shape memory polymer (SMP) microlattices could be a solution. However, existing 3D printable thermoset SMPs are limited to either low strength, poor stress memory, or non-recyclability. To address this issue, a new thermoset polymer, integrated with high strength, high recovery stress, perfect shape recovery, good recyclability, and 3D printability using direct light printing, has been developed in this study. Lightweight microlattices with various unit cells and length scales were printed and tested. The results show that the cubic microlattice has mechanical strength comparable to or even greater than that of metallic microlattices, good SME, decent recovery stress, and recyclability, making it the first multifunctional lightweight architecture (MLA) for potential multifunctional lightweight load carrying structural applications.}, - file = {/Users/fabio/Zotero/storage/77GMSWS4/4D Printing of Recyclable Lightweight Architectures Using High Recovery Stress Shape Memory Polymer.pdf} -} - -@article{Li2019b, - title = {Cellulose Nanocrystals Support Material for {{3D}} Printing Complexly Shaped Structures via Multi-Materials-Multi-Methods Printing}, - author = {Li, Vincent Chi Fung and Kuang, Xiao and Hamel, Craig M. and Roach, Devin and Deng, Yulin and Qi, H. Jerry}, - year = {2019}, - journal = {Additive Manufacturing}, - volume = {28}, - number = {April}, - pages = {14--22}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.04.013}, - abstract = {To fabricate highly complex structures, sacrificial support material is usually needed. However, traditional petroleum-based support materials are un-sustainable, non-recyclable, and difficult to be completely removed from the target structure after 3D processing. Instead, cellulose nanocrystals (CNC) gel could serves as an interesting 3D printing support material due to its sustainability, renewability, and potential recyclability. Since CNCs are highly dispersible in water as nanoparticles and are also not UV sensitive, it has less absorption or bondability with other UV curable polymer matrices. This allows them to be completely washed out by water, which offers a green and efficient method to remove the CNC support material during post processing. In addition, with increasing needs for more intricate structures, combining different 3D printing strategies into a hybrid 3D printing platform can be highly beneficial. In this work, a multi-materials-multi-methods (M4) printer with dual direct-ink-write (DIW) and DIW-inkjet printing capability was used to fabricate various complex structures while using CNC as support material. After 3D printing, water was used to remove the CNC support structure. Even in a highly confined environment, such as the inside of a balloon structure, CNC support material was still easily removed. The potential of using sustainable CNC support material and M4 hybrid 3D printing strategies to fabricate different complex structures was demonstrated. Since CNC gel is derived from forestry products and is entirely water based, the 3D printing process was also made more environmentally friendly, sustainable, and potentially recyclable.}, - keywords = {Cellulose nanocrystals,Direct-ink-write 3D printing,Hybrid 3D printing,Inkjet 3D printing}, - file = {/Users/fabio/Zotero/storage/LIBFQHU9/Cellulose nanocrystals support material for 3D printing complexly shaped structures via multi-materials-multi-methods printing.pdf} -} - -@article{Li2019c, - title = {Environmentally-Friendly Technology for Rapid on-Line Recycling of Acrylonitrile-Butadiene-Styrene, Polystyrene and Polypropylene Using near-Infrared Spectroscopy}, - author = {Li, Jia and Li, Chao and Liao, Qiucheng and Xu, Zhenming}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {213}, - pages = {838--844}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.160}, - urldate = {2020-05-21}, - abstract = {The recovery of waste acrylonitrile-butadiene-styrene (ABS), polystyrene (PS) and polypropylene (PP) from waste white goods was inefficient due to their similar chemical and physical property. In this work, an environmental friendly equipment based on on-line dynamic recognition for recycling the waste white goods plastic stream (i.e. ABS, PS and PP mixture) was established. It included the recognition process utilizing the near infrared (NIR) range 1050 nm-1350 nm and separation process using the air ejection. In particular, NIR spectrum of waste plastic stream were acquired on-line and analyzed dynamically with the self-designed software. Results showed that although ABS, PS and PP share very similar chemical and physical property, it is possible to separate them with a high accuracy up to 99\%. Meanwhile, the optimized operating parameters of the separation process were studied to guide the further industrial recycling process. The study revealed the potentiality of NIR technique as mechanical methods in recycling of plastics from the waste white goods.}, - keywords = {NIR spectrum analysis,On-line recognition,Plastic recycling,Plastic separation} -} - -@article{Li2019d, - title = {Innovation-Driven Industrial Green Development: {{The}} Moderating Role of Regional Factors}, - author = {Li, Wei and Wang, Jue and Chen, Rongxiao and Xi, Yongqin and Liu, Shi Qiang and Wu, Feimei and Masoud, Mahmoud and Wu, Xueping}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {222}, - pages = {344--354}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.027}, - urldate = {2020-05-21}, - abstract = {Industrial green development (IGD) is a critical response to the over-consumption of natural resources and pollution caused by modern industry. Innovation-driven IGD has generated great interest in recent years. However, relatively less attention has been paid to the various aspects of IGD and the moderating role of regional factors, including the developmental stage of IGD, government-scale, and enterprise-scale. The present study was conducted to fill these research gaps using panel data across 30 provinces in China from 2005 to 2015. The empirical results show that 1) innovation does promote IGD and is most effective in low-carbon production, followed by resource reduction, economic operation, and pollution abatement; 2) there is an inverted U-shaped relationship between the regional IGD level and the role of innovation in IGD; and 3) both government-scale and enterprise-scale contribute to the innovation-driven IGD. These findings provide new insights into the impact of innovation on IGD and may shed light on future decisions related to green development.}, - keywords = {Developmental stage,Enterprise-scale,Government-scale,Industrial green development,Innovation} -} - -@article{Li2019e, - title = {Strategic Introduction of an Online Recycling Channel in the Reverse Supply Chain with a Random Demand}, - author = {Li, Chunfa and Feng, Lipan and Luo, Suyuan}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117683}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117683}, - urldate = {2020-05-21}, - abstract = {Nowadays, the online recycling model becomes increasingly popular. More and more firms are gradually conducting a model with both offline and online recycling channels. Unfortunately, few works in the literature concern about it. Taking the random demand of remanufactured products into consideration, we establish a theoretical model in which the remanufacturer plays as a game leader and the recycler acts as a follower. We study three recycling channel models, namely a single offline recycling channel (Model A), a single online recycling channel (Model B) and mixed recycling channels (Model C). We obtain the optimal pricing and recycling quantities decisions, as well as the corresponding profits. Results show that the mixed recycling channels model can help reduce the transferring price under some conditions and force the recycler to raise the recycling price. As a result, the introduction of an online recycling channel can always benefit the remanufacturer but hurt the recycler. Furthermore, regarding the reverse supply chain system, we uncover that the introduction of an online channel can be beneficial or harmful. In particular, the mixed recycling channels model may be worse off than the single offline recycling channel model under a specific condition.}, - keywords = {Mixed recycling channels,Online recycling channel,Random demand,Reverse supply channel} -} - -@article{Li2020, - title = {Unlocking Employees' Green Creativity: {{The}} Effects of Green Transformational Leadership, Green Intrinsic, and Extrinsic Motivation}, - author = {Li, Wenjing and Bhutto, Tahseen Ahmed and Xuhui, Wang and Maitlo, Qamaruddin and Zafar, Abaid Ullah and Ahmed Bhutto, Niaz}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {255}, - pages = {120229}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120229} -} - -@article{Li2020a, - title = {Distance Is a Barrier to Recycling \textendash{} or Is It? {{Surprises}} from a Clean Test}, - author = {Li, Changjun and Zhang, Yi and Nouvellet, Pierre and Okoro, Joseph O. and Xiao, Wang and Harder, Marie K.}, - year = {2020}, - month = may, - journal = {Waste Management}, - volume = {108}, - pages = {183--188}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.04.022}, - urldate = {2020-05-23}, - abstract = {The distance of recycling bins from households is often considered important by practitioners, but published evidence for this uses only indirect and self-reported data. This study aims to provide such evidence by obtaining a clean test using measured distances in a walled community with 1200 households with the same building types, local governance, recycling and waste arrangements. The number of deposits each month of food waste for recycling at a designated site are logged via smart-cards allocated per household. The number of days per month that each household deposits showed a highly significant - but small - negative correlation with distance of the bin: fewer householders participate if further away, accounting for 3\% of the variation. Surprisingly, there is no variation with distance among those who do participate: their recycling frequency does not vary. This second result is not consistent with the first in terms of cost/benefit concepts assumed by government planners, nor with the static theories of behaviour currently used in waste management research. We recommend that recycling practitioners note the smallness of the contribution of distance to recycling performance, and not overrate it. And we recommend that researchers make better use of non-static models (which model different stages towards behaviour change), which our second result appears to call for.}, - keywords = {Behaviour change,Change theory,Inconvenience,Recycling} -} - -@article{Li2021, - title = {The Collapse of Global Plastic Waste Trade: {{Structural}} Change, Cascading Failure Process and Potential Solutions}, - author = {Li, Cai and Wang, Ling and Zhao, Jinsong and Deng, Liangchun and Yu, Shuxia and Shi, Zhihua and Wang, Zhen}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {314}, - pages = {127935}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127935}, - urldate = {2021-07-05}, - abstract = {The collapse of the plastic waste trade (PWT) amplifies the threats of mismanaged plastic waste to the ecological system and human health, posing a risk as well as an opportunity to the global circular economy. Although trade barriers in the PWT continue to impact waste management systems, there are few analyses that propose global mitigation strategies in response to trade fluctuations. Here, we show that most countries have been overloaded with plastic waste compared to their ordinary capacity since China's import ban in 2017. We apply a cascading failure model to quantify the collapse process worldwide and find that 183 countries become overloaded as this collapse cascades, with nearly 6\% of countries experiencing over 1.5 times their ordinary load. However, this overload could be greatly alleviated if leading countries were to sharply increase their capacity to treat plastic waste based on scenario analysis. Although waste exporters should take more responsibility and scenario analysis results show that top exporters could effectively mitigate global plastic waste levels by increasing their treatment capacity, cooperation between key exporters, importers, and intermediators has the best mitigation effects. Our analysis suggests that key countries should as soon as possible take responsibility for and cooperate in mitigating potential plastic waste pollution related to trade fluctuations.}, - keywords = {Cascading failure model,Import bans,International trade,Plastic waste,Scenario analysis} -} - -@article{liAdditiveManufacturingdrivenDesign2020, - title = {Additive {{Manufacturing-driven Design Optimization}}: {{Building Direction}} and {{Structural Topology}}}, - author = {Li, Shaoying and Yuan, Shangqin and Zhu, Jihong and Wang, Chuang and Li, Jiang and Zhang, Weihong}, - year = {2020}, - month = jun, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101406}, - publisher = {{Elsevier BV}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101406}, - urldate = {2020-07-14} -} - -@article{liAISocialGood2021, - title = {{{AI}} for {{Social Good}}: {{AI}} and {{Big Data Approaches}} for {{Environmental Decision-Making}}}, - author = {Li, Victor O.K. and Lam, Jacqueline C.K. and Cui, Jiahuan}, - year = {2021}, - month = nov, - journal = {Environmental Science \& Policy}, - volume = {125}, - pages = {241--246}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.09.001}, - urldate = {2021-09-27} -} - -@article{Liang2019, - title = {A Game Theory Approach for the Renegotiation of {{Public-Private Partnership}} Projects in {{Chinese}} Environmental and Urban Governance Industry}, - author = {Liang, Qingxue and Hu, Hao and Wang, Zhaojing and Hou, Feng}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117952}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117952} -} - -@article{Liang2021, - title = {An Analysis of the Plastic Waste Trade and Management in {{Asia}}}, - author = {Liang, Yangyang and Tan, Quanyin and Song, Qingbin and Li, Jinhui}, - year = {2021}, - month = jan, - journal = {Waste Management}, - volume = {119}, - pages = {242--253}, - publisher = {{Pergamon}}, - doi = {10.1016/j.wasman.2020.09.049}, - urldate = {2020-10-27}, - abstract = {\textcopyright{} 2020 Elsevier Ltd It is well known that Asia generates and receives large quantities of plastic waste. Through a detailed study of plastic waste generation and trade, the management and treatment of plastic waste in Asia were analyzed from the regional perspective. The amounts of plastic waste in municipal solid waste and in industrial solid waste were estimated to be 79 Mt and 42 Mt, respectively, in Asia. The overall treatment and recycling status in Asia are unsatisfactory. Asia imported 74\% of the plastic waste in the world in 2016, and China (mainland) imported the most plastic waste until 2017, with 5.8 to 8.3 Mt. In 2017, about half the plastic waste imported by Asia came from other regions, and after subtracting the exported quantity, 98\% of the plastic waste was left in Asia for treatment and disposal. The plastic waste imported by Asia declined about 72\% in monetary value in 2018. There is still a large gap between the plastic waste quantity imported to Asia and that exported from Asia. China's ban of plastic waste imports caused import quantities to drop to 52 kt in 2018, simultaneously, exports from the largest exporting countries or regions such as Hong Kong (China), the USA, Japan, and Germany decreased. While Vietnam, Malaysia and some other Asian countries and regions saw significant increases in plastic waste imports from 2016 to 2018. Considering this situation, countries in Asia are starting to strictly limit plastic waste imports from other countries.}, - keywords = {Asia,Material flow,Plastic waste,Waste trade}, - file = {/Users/fabio/Zotero/storage/6BZ6DT3I/Liang et al. - 2021 - An analysis of the plastic waste trade and management in Asia.pdf;/Users/fabio/Zotero/storage/GZRSTAQ6/Liang et al. - 2021 - An analysis of the plastic waste trade and management in Asia(2).pdf} -} - -@article{liaoExaminingAntecedentsIdea2021, - title = {Examining the Antecedents of Idea Contribution in Online Innovation Communities: {{A}} Perspective of Creative Self-Efficacy}, - author = {Liao, Junyun and Chen, Jiawen and Mou, Jian}, - year = {2021}, - month = aug, - journal = {Technology in Society}, - volume = {66}, - pages = {101644}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2021.101644}, - urldate = {2021-07-05} -} - -@article{Lieder2016, - ids = {lieder2016}, - title = {Towards Circular Economy Implementation: {{A}} Comprehensive Review in Context of Manufacturing Industry}, - author = {Lieder, Michael and Rashid, Amir}, - year = {2016}, - journal = {Journal of Cleaner Production}, - volume = {115}, - pages = {36--51}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2015.12.042}, - abstract = {The concept of circular economy (CE) is to an increasing extent treated as a solution to series of challenges such as waste generation, resource scarcity and sustaining economic benefits. However the concept of circularity is not of novel as such. Specific circumstances and motivations have stimulated ideas relevant to circularity in the past through activities such as reuse, remanufacturing or recycling. Main objectives of this work are: to provide a comprehensive review of research efforts encompassing aspects of resources scarcity, waste generation and economic advantages; to explore the CE landscape in the context of these three aspects especially when they are considered simultaneously; based on an idea of a comprehensive CE framework, propose an implementation strategy using top-down and bottom-up approach in a concurrent manner. To fulfill this objective a comprehensive review of state-of-the-art research is carried out to understand different ideas relevant to CE, motivation for the research and context of their recurrence. Main contributions of this paper are a comprehensive CE framework and a practical implementation strategy for a regenerative economy and natural environment. The framework emphasizes on a combined view of three main aspects i.e. environment, resources and economic benefits. It also underlines that joint support of all stakeholders is necessary in order to successfully implement the CE concept at large scale. The proposed framework and implementation strategy also identify new avenues for future research and practice in the field of CE.}, - arxiv = {A luxury brand management framework built from historical review and case study analysis}, - isbn = {0959-6526}, - pmid = {97066607}, - keywords = {Circular economy,Economic benefits,Environmental impact,Framework,Implementation,Resource scarcity}, - file = {/Users/fabio/Zotero/storage/V4XLYB94/Towards circular economy implementation- a comprehensive review in context of manufacturing industry.pdf} -} - -@article{liedongTakingStockCharting2021, - title = {Taking Stock and Charting the Future: The Management and Implications of {{DIY}} Laboratories for Innovation and Society}, - author = {Liedong, Tahiru Azaaviele and Sarpong, David}, - year = {2021}, - month = oct, - journal = {https://doi.org/10.1080/09537325.2021.1976406}, - volume = {33}, - number = {10}, - pages = {1119--1131}, - publisher = {{Routledge}}, - doi = {10.1080/09537325.2021.1976406}, - urldate = {2021-09-27}, - abstract = {DiY science, as a field of research and practice, has grown rapidly over the past few decades. However, a significant portion of the DiY corpus focuses on technical issues in engineering and health...}, - keywords = {Innovation studies,public understanding of science and technology,risk analysis and technology,technology \& innovation studies}, - file = {/Users/fabio/Zotero/storage/SM6HFD75/full-text.pdf} -} - -@article{Liefner2019, - title = {Low-Cost Innovation and Technology-Driven Innovation in {{China}}'s Machinery Industry}, - author = {Liefner, Ingo and Losacker, Sebastian}, - year = {2019}, - month = aug, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--13}, - issn = {0953-7325}, - doi = {10.1080/09537325.2019.1656333} -} - -@article{Ligon2017a, - title = {Polymers for {{3D Printing}} and {{Customized Additive Manufacturing}}}, - author = {Ligon, Samuel Clark and Liska, Robert and Stampfl, J{\"u}rgen and Gurr, Matthias and M{\"u}lhaupt, Rolf}, - year = {2017}, - month = aug, - journal = {Chemical Reviews}, - volume = {117}, - number = {15}, - pages = {10212--10290}, - issn = {0009-2665}, - doi = {10.1021/acs.chemrev.7b00074}, - abstract = {Additive manufacturing (AM) alias 3D printing translates computer-aided design (CAD) virtual 3D models into physical objects. By digital slicing of CAD, 3D scan, or tomography data, AM builds objects layer by layer without the need for molds or machining. AM enables decentralized fabrication of customized objects on demand by exploiting digital information storage and retrieval via the Internet. The ongoing transition from rapid prototyping to rapid manufacturing prompts new challenges for mechanical engineers and materials scientists alike. Because polymers are by far the most utilized class of materials for AM, this Review focuses on polymer processing and the development of polymers and advanced polymer systems specifically for AM. AM techniques covered include vat photopolymerization (stereolithography), powder bed fusion (SLS), material and binder jetting (inkjet and aerosol 3D printing), sheet lamination (LOM), extrusion (FDM, 3D dispensing, 3D fiber deposition, and 3D plotting), and 3D bioprinting....}, - arxiv = {NIHMS150003}, - isbn = {0009-2665}, - pmid = {28756658}, - file = {/Users/fabio/Zotero/storage/EBVJNXDN/Polymers for 3D Printing and Customized Additive Manufacturing.pdf} -} - -@article{Liimatainen2015, - title = {Supporting {{Inter-Organizational Collaboration}} in {{Coworking Clusters}} : {{The Role}} of {{Place}} , {{Community}} and {{Coordination}}}, - author = {Liimatainen, Karoliina}, - year = {2015}, - journal = {Aalto University}, - abstract = {ba}, - keywords = {aalto,collaboration,coworking} -} - -@article{liIncentivesMayNot2020, - title = {The Incentives May Not Be the Incentive: {{A}} Field Experiment in Recycling of Residential Food Waste}, - author = {Li, C. and Wang, Y. and Li, Y. and Huang, Y. and Harder, M. K.}, - year = {2020}, - month = dec, - journal = {Resources, Conservation and Recycling}, - pages = {105316}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105316}, - urldate = {2020-12-21}, - abstract = {Recycling of residential food waste is urgently needed in cities worldwide to mitigate issues of greenhouse gases, pollution, and resource wastage. Poor waste-sorting behaviour of residents is a key barrier: academics put forward general principles for behaviour change, but none resulting in successful large-scale and effective recycling programs. The complexity of factors influencing this behaviour has historically made the development of prescriptive theories \textendash{} theories which can predict useful program interventions for a range of situations- impossible. Here we present our sixth study in a research-through-design series to develop a general prescriptive theory of residential recycling behaviour. We used five residential compounds in modern China (and controls) to experimentally test the impact of suspending household `Incentives' on recycling tonnages, while varying `Social Influences'. The results confirmed these as causal determinants, alongside `Habit', which was found well-formed after 12 months. The relative determinant influences in months 10\textendash 11 (months 14\textendash 23) were: habit 50\% (80\textendash 90\%); social influences 50\% (10\textendash 20\%); incentives 12\% (5\%). Surprisingly, `Social Influences' dominated `Incentives'. Exploratory interviews indicated that Interpersonal Interactions comprised an important element of `Social Influences'. In addition, 10\textendash 20\% participants were inconvenienced by the time-window imposed for depositing their food waste. These two factors deserve more careful consideration by planners, and testing in the Prescriptive Theory-building.}, - keywords = {Empirical prescriptive theory,Food waste,Incentives,Inconvenience,Recycling,Social influences} -} - -@article{liLifecycleEconomicEnvironmental2023, - title = {Life-Cycle Economic and Environmental Impacts of Municipal Solid Waste Reverse Logistics in Residential Areas}, - author = {Li, Haimei and Tian, Yi and Li, Zhulin and Wu, Chao and Liu, Yili}, - year = {2023}, - month = jun, - journal = {Waste Management}, - volume = {164}, - pages = {200--208}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.04.016}, - urldate = {2023-05-10}, - abstract = {The economic and environmental impacts of the reverse logistics (RL) process (including drop-off, collection and transportation [C\&T]) of the waste disposal chain are becoming increasingly prominent with the increasing generation of municipal solid waste (MSW) and promotion of MSW classification. Quantitative evaluation of this process from economic and environmental perspectives is of great significance for MSW management. This study focused on the financial capital, materials, and energy consumption in the RL process in Xi an City, China. Based on field investigation, the magnitude of pollutant emissions from MSW C\&T vehicles over their life cycle was predicted using the GREET software and total RL life-cycle cost and life-cycle assessment were analyzed. The results showed that the finical costs of RL were \$46.35\textendash\$49.03 per ton of food waste and \$62.52\textendash\$88.84 per ton of residual waste; the environmental impacts caused by the RL process accounted for 79.24\%\textendash 96.00\% and 20.87\%\textendash 68.55\% of the entire food waste and residual waste management chains, respectively. Labor costs were the biggest financial expenditure and the fuel cycle of C\&T vehicles caused the majority of the environmental impacts. Source-separated waste management scenarios represented more environmental benefits but poorer economic positions. In the future, improving MSW source-separation accuracy, replacing diesel C\&T vehicles with electric ones, and optimizing the RL system could reduce the environmental and economic impacts of the entire waste management system.}, - langid = {english}, - keywords = {Collection,Life-cycle assessment,Life-cycle cost,Municipal solid waste,Reverse logistics,Transportation}, - file = {/Users/fabio/Zotero/storage/R3VDS2E9/Li et al. - 2023 - Life-cycle economic and environmental impacts of m.pdf;/Users/fabio/Zotero/storage/9ZINE9LU/S0956053X23002933.html} -} - -@article{Lilley2019, - title = {Ageing (Dis)Gracefully: Enabling Designers to Understand Material Change}, - author = {Lilley, D. and Bridgens, B. and Davies, A. and Holstov, A.}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {417--430}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.01.304}, - abstract = {From the moment of purchase, pristine objects are subjected to an array of stimuli including wear, impact, heat, light, water and air which alter their tactile and aesthetic properties. Material change is often regarded as `damage' or `degradation' and contributes to premature obsolescence but has potential to be used as a tool to engender emotional engagement with an object and extend product lifetimes. However, materials resources for designers rarely provide information about how materials will change in use. In this paper we draw on a combination of literature and user studies to elucidate the complex web of factors which contribute to changes in material surfaces, which we present in a `framework for understanding material change'. We go on to explore the role that changes to product material surfaces, and the design of objects to change in particular ways with use, could have on the transition to circular modes of consumption. A range of resources which aim to increase designers' understanding of material change are presented, and the challenges of creating, utilising and developing these resources are discussed.}, - keywords = {cosmetic obsolescence,graceful ageing,material change,materials library.,patina}, - file = {/Users/fabio/Zotero/storage/6DGBY2W8/Ageing (dis)gracefully- Enabling designers to understand material change.pdf} -} - -@article{Lim2008, - title = {Processing Technologies for Poly(Lactic Acid)}, - author = {Lim, L.-T. and Auras, R. and Rubino, M.}, - year = {2008}, - month = aug, - journal = {Progress in Polymer Science}, - volume = {33}, - number = {8}, - pages = {820--852}, - issn = {00796700}, - doi = {10.1016/j.progpolymsci.2008.05.004}, - urldate = {2014-03-20}, - file = {/Users/fabio/Zotero/storage/39TQV5PY/Lim, Auras, Rubino - 2008 - Processing technologies for poly(lactic acid).pdf} -} - -@incollection{Lim2010, - title = {Processing of {{Poly}}({{Lactic Acid}})}, - booktitle = {Poly({{Lactic Acid}})}, - author = {Lim, Loong-Tak and Cink, Kevin and Vanyo, Tim}, - year = {2010}, - month = sep, - pages = {189--215}, - publisher = {{John Wiley \& Sons, Inc.}}, - address = {{Hoboken, NJ, USA}}, - doi = {10.1002/9780470649848.ch14} -} - -@article{limaSystematicReviewEffects2023, - title = {A Systematic Review of the Effects of Microplastics and Nanoplastics on the Soil-Plant System}, - author = {Lima, Jacqueline Zanin and Cassaro, Raul and Ogura, Allan Pretti and Vianna, Marilda Mendon{\c c}a Guazzelli Ramos}, - year = {2023}, - month = apr, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.04.010}, - urldate = {2023-05-01}, - abstract = {Global pollution resulting from the presence of microplastics (MPs) and nanoplastics (NPs) in the environment has significantly intensified due to the production of plastic and its improper disposal. This scenario endangers all forms of life and services in aquatic and terrestrial ecosystems at an unprecedented rate. Although the number of studies evaluating this issue has increased over the last decade, the impacts of plastics have not been sufficiently defined and delimited, mainly in terrestrial environments. This systematic review presents the research progress on the interaction of MPs and NPs with soil-plant systems, providing key questions for future research. The selected publications (n\,=\,85) evaluated various types of polymers, especially polyethylene and polystyrene, placed in the soil in different shapes (e.g., film, fragment, sphere, and fiber) and sizes (ranging from 0.02 to 7000\,{$\mu$}m). In general, they revealed that distinct characteristics of MPs/NPs can influence the germination and development of plants, with wheat, rice, maize, and lettuce being the most studied. The main assessed endpoints were length and biomass, often segmented between root and shoot, and a comparative analysis between treatments containing MPs and NPs and the control (without contamination) provided different results, namely positive, negative, and no significant differences. These findings indicated that MPs/NPs may have more aboveground than belowground effects on plant growth. The combined presence of plastic waste with other contaminants or substances can change the physical, chemical, and biological properties of the soil, directly and indirectly affecting plant growth and soil health. However, most of those studies were developed with artificial contamination and on a laboratory scale. Since soils are dynamic and complex systems, there is still a gap of knowledge to be investigated to improve representativeness and address current limitations.}, - langid = {english}, - keywords = {Combined effects,Phytotoxicity,Plastic pollution,Potential environmental risks,Soil property,Sustainable Development Goals}, - file = {/Users/fabio/Zotero/storage/UX6ACFXE/Lima et al_2023_A systematic review of the effects of microplastics and nanoplastics on the.pdf;/Users/fabio/Zotero/storage/75KGWNDJ/S2352550923000829.html} -} - -@article{Lin2017, - title = {A Predictive Bone Drilling Force Model for Haptic Rendering with Experimental Validation Using Fresh Cadaveric Bone}, - author = {Lin, Yanping and Chen, Huajiang and Yu, Dedong and Zhang, Ying and Yuan, Wen}, - year = {2017}, - journal = {International Journal of Computer Assisted Radiology and Surgery}, - volume = {12}, - number = {1}, - pages = {91--98}, - issn = {18616429}, - doi = {10.1007/s11548-016-1463-7}, - abstract = {PURPOSE: Bone drilling simulators with virtual and haptic feedback provide a safe, cost-effective and repeatable alternative to traditional surgical training methods. To develop such a simulator, accurate haptic rendering based on a force model is required to feedback bone drilling forces based on user input. Current predictive bone drilling force models based on bovine bones with various drilling conditions and parameters are not representative of the bone drilling process in bone surgery. The objective of this study was to provide a bone drilling force model for haptic rendering based on calibration and validation experiments in fresh cadaveric bones with different bone densities. METHODS: Using a commonly used drill bit geometry (2 mm diameter), feed rates (20-60 mm/min) and spindle speeds (4000-6000 rpm) in orthognathic surgeries, the bone drilling forces of specimens from two groups were measured and the calibration coefficients of the specific normal and frictional pressures were determined. RESULTS: The comparison of the predicted forces and the measured forces from validation experiments with a large range of feed rates and spindle speeds demonstrates that the proposed bone drilling forces can predict the trends and average forces well. CONCLUSION: The presented bone drilling force model can be used for haptic rendering in surgical simulators.}, - pmid = {27549761}, - keywords = {Bone drilling,Force model,Haptic rendering,Surgical simulator}, - file = {/Users/fabio/Zotero/storage/MB89CGUH/A predictive bone drilling force model for haptic rendering with experimental validation using fresh cadaveric bone.pdf} -} - -@article{Lin2018, - title = {Single-Layer Temperature-Adjusting Transition Method to Improve the Bond Strength of {{3D-printed PCL}}/{{PLA}} Parts}, - author = {Lin, Weiyi and Shen, Hongyao and Xu, Guanhua and Zhang, Linchu and Fu, Jianzhong and Deng, Xiaolei}, - year = {2018}, - month = dec, - journal = {Composites Part A: Applied Science and Manufacturing}, - volume = {115}, - pages = {22--30}, - issn = {1359835X}, - doi = {10.1016/j.compositesa.2018.09.008}, - urldate = {2021-01-15}, - abstract = {Although multi-material fused deposition modelling (FDM) has shown good progress and potential for industrial and scientific development, differences in physical and chemical properties cause weak bond strength between dissimilar materials in multi-material FDM parts. This paper proposes a single-layer temperature-adjusting transition (SLTAT) method to improve bond strength between dissimilar materials with different melting temperatures by adjusting the bonding-layer temperature. Herein, the bonding-layer temperature effects on the tensile strength of polycaprolactone (PCL)/polylactic acid (PLA) structures were investigated. PCL/PLA parts prepared with this method had 28\% higher tensile strength than unprocessed parts when the bonding-layer temperature was 130 \textdegree C. Bonding mechanism was proposed to explain the failure modes of the PCL/PLA parts after tensile testing. Freeze-fractured surfaces of SLTAT-processed PCL/PLA specimens were observed to better understand the correlations between bonding-layer temperature and tensile strength. This approach is promising to apply in ordinary multi-material FDM processing without adding additional equipment or compromising dimensional accuracy.}, - keywords = {A. Biocomposite,B. Interface/interphase,B. Mechanical properties,E. 3D-Printing}, - file = {/Users/fabio/Zotero/storage/BAHETI7F/full-text.pdf} -} - -@article{linDatadrivenModelsEmployed2022, - title = {Data-Driven Models Employed to Waste Plastic in {{China}}: {{Generation}}, Classification, and Environmental Assessment}, - shorttitle = {Data-Driven Models Employed to Waste Plastic in {{China}}}, - author = {Lin, Kunsen and Zhao, Youcai and Zhang, Meilan and Shi, Wenjie and Kuo, Jia-Hong}, - year = {2022}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13340}, - urldate = {2023-01-15}, - abstract = {It is crucial to precisely predict the generation of plastic waste and realize its fine classification in terms of policy demand and environmental benefits. Only a few studies have used the date-driven model to forecast the amount of plastic waste. The benefits of classifying the plastic waste using deep learning have also been only scarcely reported in the literature. Therefore, this study used the Prophet model to estimate the amount of plastic waste from 2005 to 2025. Four types of Visual Geometry Group Networks based on Transfer Learning (TLVGGNet) were performed for classifying the plastic waste. Potentials of saved energy, the reduction of green-house gases emission (GHG), and air pollutants were also discussed under different scenarios (current recycling system and TLVGGNet system). The results showed that the amount of waste plastic was anticipated to be 26.44 Mt in 2020 and 33.18 Mt in 2025 in China. The method of transfer learning could shorten the training time and improve the performance of the TLVGGNet-11 model in the test dataset (41.6\textendash 68.1\%). Moreover, TLVGGNet-16 was considered to be the most optimum model for plastic waste classification in terms of training time (83.94 s), accuracy (75.5\%), precision (76.9\%), recall (75.5\%), and F1 score (75.1\%). The TLVGGNet-16 system contributes about 12.15\textendash 15.97\% in terms of electricity-savings. Compared with the current recycling system, the amount of CO2 emissions saved and reduction in CH4 emissions could be more than 8\textendash 10\% and 0.4\textendash 0.5\%, respectively, in the TLVGGNet-16 system. The saved VOCS and NOX emissions were within the ranges of 34.84\textendash 127.22 billion kg and 93.64\textendash 414.14 billion kg between 2017 and 2025 using the method of deep learning.}, - copyright = {\textcopyright{} 2022 by the International Society for Industrial Ecology.}, - langid = {english}, - keywords = {classification,deep learning,environmental assessment,generation,industrial ecology,plastic waste}, - file = {/Users/fabio/Zotero/storage/S2GG3QBN/Lin et al. - Data-driven models employed to waste plastic in Ch.pdf;/Users/fabio/Zotero/storage/K5JBAS7Q/jiec.html} -} - -@article{Lindstrom2017, - title = {Optimizing {{Recycling Management Using Industrial Internet Supporting Circular Economy}}: {{A Case Study}} of an {{Emerging IPS}} 2}, - author = {Lindstr{\"o}m, John and Hermanson, Anders and Hellis, Mats and Ky{\"o}sti, Petter}, - year = {2017}, - journal = {Procedia CIRP}, - volume = {64}, - pages = {55--60}, - issn = {22128271}, - doi = {10.1016/j.procir.2017.03.072} -} - -@article{Lindtner2015, - title = {Hacking with Chinese Characteristics}, - author = {Lindtner, Silvia}, - year = {2015}, - month = sep, - volume = {40}, - number = {5}, - pages = {854--879}, - issn = {0162-2439}, - doi = {10.1177/0162243915590861} -} - -@article{linEvaluatingWasteCO22023, - title = {Evaluating the Waste and {{CO2}} Reduction Potential of Packaging by Reuse Model in Supermarkets in {{Taiwan}}}, - author = {Lin, Hsin-Tien and Chiang, Cian-Wei and Cai, Jhao-Ning and Chang, Hsin-Yu and Ku, Yu-Nien and Schneider, Falk}, - year = {2023}, - month = apr, - journal = {Waste Management}, - volume = {160}, - pages = {35--42}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.01.028}, - urldate = {2023-02-13}, - abstract = {Consumption of single-use packaging has been increasing globally and the waste produced causes negative impacts on both human and the environment. Retailers, such as supermarkets, developed quickly in recent years to provide for the modern lifestyle, using a lot of packaging in the process of distribution and sales. This research evaluates the packaging waste and CO2 reduction potential of 10 different products sold in supermarkets in Taiwan when adopting different reuse strategies of Reduce, Return and Refill. In the suggested reuse strategies, a total of 8 kilotons of packaging waste and 30 kilotons of packaging CO2 can be reduced, accounting for 50.8\% and 59.8\% reduction of the current situation, respectively. Retailers are suggested to provide different reuse strategies and experiential activities to increase consumers familiarity with new consumption methods. Significant impacts are made with a slight change in the small proportion investigated, which suggests considerable benefits if the scope is expanded.}, - langid = {english}, - keywords = {CO reduction,Food packaging,Retailers,Reusable packaging,Reuse model,Waste reduction}, - file = {/Users/fabio/Zotero/storage/2U5TWES5/S0956053X23000326.html} -} - -@article{lingardJoiningConversationProblem2015, - title = {Joining a Conversation: The Problem/Gap/Hook Heuristic}, - shorttitle = {Joining a Conversation}, - author = {Lingard, Lorelei}, - year = {2015}, - month = oct, - journal = {Perspectives on Medical Education}, - volume = {4}, - number = {5}, - pages = {252--253}, - issn = {2212-2761}, - doi = {10.1007/s40037-015-0211-y}, - langid = {english}, - pmcid = {PMC4602011}, - pmid = {26346497}, - file = {/Users/fabio/Zotero/storage/PN5ILE2L/Lingard - 2015 - Joining a conversation the problemgaphook heuri.pdf} -} - -@article{lingDirectSpilloverEffects2023, - title = {Direct and Spillover Effects of Social Norm Nudges for Household Recycling: {{A}} Longitudinal Field Experiment}, - shorttitle = {Direct and Spillover Effects of Social Norm Nudges for Household Recycling}, - author = {Ling, Maoliang and Xu, Lin and Yang, Haimi}, - year = {2023}, - month = jun, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.06.001}, - urldate = {2023-06-15}, - abstract = {Applying social norm nudges to motivate household recycling is becoming increasingly popular. However, little is known about the compatibility between norm-based recycling policies and other waste management measures. Using a longitudinal field experiment with residents in Quzhou, China, we evaluated social norms messaging about household recycling in terms of its impact on recycling behavior and public support for waste prevention and harmless disposal policies. We also assessed treatment effect heterogeneity across subpopulations and persistence after messaging ended. The nudge increased recycling participation and policy support over a five-month treatment period, indicating positive direct and spillover effects. Both effects were more salient among recipients with weaker pro-environmental intrinsic motivation or community social embeddedness; however, they faded over a following five-month period when messaging was removed. Overall, the results suggest that social norm nudges improve the target behavior and facilitate policy synergy, although these benefits are neither universal nor sustainable.}, - langid = {english}, - keywords = {Household recycling,Impact evaluation,Nudge,Social norms,Spillover}, - file = {/Users/fabio/Zotero/storage/VMQVXTA9/S2352550923001331.html} -} - -@article{lintonMaterialsRecyclingIndustrial2004, - ids = {linton2004a}, - title = {Materials Recycling and Industrial Ecology}, - author = {Linton, Jonathan and Yeomans, Julian Scott}, - year = {2004}, - month = apr, - journal = {Nature Materials}, - volume = {3}, - number = {4}, - pages = {199--201}, - publisher = {{Nature Publishing Group}}, - issn = {1476-4660}, - doi = {10.1038/nmat1101}, - urldate = {2022-09-22}, - abstract = {New legislation has been passed in an attempt to minimize industrial waste and promote recycling. What does this mean for materials science?}, - langid = {english}, - keywords = {Biomaterials,Condensed Matter Physics,general,Materials Science,Nanotechnology,Optical and Electronic Materials}, - file = {/Users/fabio/Zotero/storage/TMXUSA5H/Linton_Yeomans_2004_Materials recycling and industrial ecology.pdf;/Users/fabio/Zotero/storage/78KPIIZA/nmat1101.html} -} - -@article{linWhoWinnerIndustry2020, - title = {Who Is the Winner in an Industry of Innovation?}, - author = {Lin, Yuanfang and Pazgal, Amit and Soberman, David A.}, - year = {2020}, - month = jun, - journal = {International Journal of Research in Marketing}, - publisher = {{Elsevier B.V.}}, - issn = {01678116}, - doi = {10.1016/j.ijresmar.2020.05.001}, - urldate = {2020-06-07}, - abstract = {This paper offers insight as to why the average profitability of firms in categories characterized by innovation is high and a rationale for empirical evidence that firms with basic products in innovative categories often exhibit higher profitability than the leading innovator. The analysis is built on the simple fact that not all consumers in a market are willing to pay more for an innovation when it is introduced. Our model reflects price competition between an innovating firm that chooses an optimal level of innovation and a competitor that offers a basic product. The price equilibrium establishes that the innovator confers a significant positive externality on its competitor by innovating. This increases the profitability of both firms. Findings from our model demonstrate that the profitability of the innovator is affected by the cost of innovation, the fraction of consumers who are willing to pay more for the innovation and changes in the cost of producing the improved product. The model identifies market conditions that lead the non-innovating competitor to benefit as much or more than the innovator who invests to develop the innovation. We believe that these dynamics are pivotal in explaining high overall profitability in categories characterized by innovation. The analysis also provides important prescriptions for the management of firms in innovative categories.}, - keywords = {Externalities,Innovation,Mixed-strategy equilibrium,Price competition,Segmentation} -} - -@article{liPETAdditionDelays2023, - title = {{{PET}} Addition Delays the Composting Mature Process and Promotes Microbiota Associated with Plastic Degradation in Plastisphere}, - author = {Li, Xiaoxiao and Qi, Xiaoyan and Liu, Xinxin and Khalid, Muhammad and Ye, Jieqi and Romantschuk, Martin and Chen, Fu and Hua, Yinfeng and Hui, Nan}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {389}, - pages = {136066}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2023.136066}, - urldate = {2023-02-12}, - langid = {english} -} - -@inproceedings{Lipson2000, - title = {Towards Continuously Reconfigurable Self-Designing Robotics}, - booktitle = {Proceedings 2000 {{ICRA}}. {{Millennium Conference}}. {{IEEE International Conference}} on {{Robotics}} and {{Automation}}. {{Symposia Proceedings}} ({{Cat}}. {{No}}.{{00CH37065}})}, - author = {Lipson, H. and Pollack, J.B.}, - year = {2000}, - volume = {2}, - pages = {1761--1766}, - publisher = {{IEEE}}, - issn = {1050-4729}, - doi = {10.1109/ROBOT.2000.844850}, - abstract = {We propose a new process for continuously reconfigurable robotics. Given a task, a robot evolves a suitable morphology and control, then prints the assembled 3D structure, downloads into it and performs the task, and then recycles into a different form for the next task. This approach relinquishes the need to adhere to discrete or fixed components as well as manually designed configurations. Although the technology for fully realizing the proposed concept is not entirely available, we have demonstrated a first case: Given the task of locomotion, various robots with different mechanics and control are evolved automatically. The design space is comprised of only linear actuators and sigmoidal control neurons embodied in an arbitrary thermoplastic body. The robots then print pre-assembled using rapid prototyping technology, and perform the task in reality. The robots are then recycled. This paper described one implementation and provides examples of successful physical robots generated by the proposed process}, - isbn = {0-7803-5886-4}, - file = {/Users/fabio/Zotero/storage/XARGVAFX/towards continuously reconfigurable self-designing robotics.pdf} -} - -@article{Lira2010, - title = {Transverse Shear Stiffness of Thickness Gradient Honeycombs}, - author = {Lira, C. and Scarpa, F.}, - year = {2010}, - month = jun, - journal = {Composites Science and Technology}, - volume = {70}, - number = {6}, - pages = {930--936}, - publisher = {{Elsevier Ltd}}, - issn = {02663538}, - doi = {10.1016/j.compscitech.2010.02.007}, - urldate = {2013-01-14}, - file = {/Users/fabio/Zotero/storage/2YGBYCK7/Transverse shear stiffness of thickness gradient honeycombs.pdf} -} - -@article{lisieckiCircularEconomyInitiatives2023, - title = {Circular Economy Initiatives Are No Guarantee for Increased Plastic Circularity: {{A}} Framework for the Systematic Comparison of Initiatives}, - shorttitle = {Circular Economy Initiatives Are No Guarantee for Increased Plastic Circularity}, - author = {Lisiecki, M. and Damgaard, A. and Ragaert, K. and Astrup, T. F.}, - year = {2023}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {197}, - pages = {107072}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107072}, - urldate = {2023-08-19}, - abstract = {Plastic plays a prominent role within circular economy, with many stakeholders promoting initiatives to increase plastic circularity during the manufacturing, use and end-of-life phases. Despite well-meant intentions, many initiatives are characterized by a lack of compliance with basic circular economy principles, implementation barriers, and limited effects on the intended long-term plastic circularity. This study provides a systematic evaluation framework for comparison of plastic initiatives, based on 17 criteria addressing key aspects of plastic circularity. A three-level likelihood ranking approach is applied to analyse the impact of 54 initiatives targeting plastic circularity in a European context. It was found that relatively few of these initiatives were readily implementable without considerable investments, e.g. in new waste management and recycling technologies, and changes in plastic production and product design. The results clearly suggest that current suggestions for circular economy initiatives targeting plastic may have limited effect and not lead to the intended impacts without the support of new regulations and change in plastic demand and consumption. The study stresses the importance of synergies and cooperation between stakeholders across the value chain to reach plastic circularity. The framework offers a consistent basis for decision-makers to identify critical barriers and enablers in relation to plastic circularity characteristics, but the approach may also be applied to other topic areas.}, - keywords = {Circular economy,Initiative,Plastic,Plastic circularity,Recycling,Waste management}, - file = {/Users/fabio/Zotero/storage/Y8MZ7AJE/Lisiecki et al_2023_Circular economy initiatives are no guarantee for increased plastic circularity.pdf;/Users/fabio/Zotero/storage/DZFDTH5A/S0921344923002082.html} -} - -@article{liSystemDynamicsModelling2020, - title = {System Dynamics Modelling for Improving Urban Resilience in {{Beijing}}, {{China}}}, - author = {Li, Guijun and Kou, Chenhuan and Wang, Yongsheng and Yang, Hongtao}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104954}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104954}, - urldate = {2020-06-18}, - abstract = {Resilience building has become increasingly important in the field of urban complexity and sustainable governance. For a better understanding of the adaptive capacity of an urban system, this paper integrated four types of sub-resilience across different domains into the comprehensive urban resilience. Then, a system dynamics (SD) model was established to clarify the causal feedback and dynamic interaction mechanism between the components of urban resilience. Taken the megacity of Beijing as the case, the improvement process of urban resilience was simulated by 2025, and four policy scenarios were set to improve the urban resilience effectively by adjusting endogenous variables. The results showed that the growth of urban resilience would undergo three periods: fast growth exceeded 10\% in first two years, while slowed down afterwards in following five years, and finally increased again in the future. The sub-resilience that dominates the urban resilience growth changed from the material and energy resilience to the governance resilience, and then to the socio-economic resilience. Scenarios analysis indicated that all subsystems were sensitive to the policy adjustment except for the socio-economic component. The purpose of this paper is to build a comprehensive and informative resilience development tool for urban managers and planners to maintain the desired status of city operation, as well as respond positively to resilience crisis that might occur in the near future.}, - keywords = {Policy simulation,System Dynamics,Urban resilience} -} - -@article{Little2020, - title = {Towards {{Distributed Recycling}} with {{Additive Manufacturing}} of {{PET Flake Feedstocks}}}, - author = {Little, Helen A. and Tanikella, Nagendra G. and J. Reich, Matthew and Fiedler, Matthew J. and Snabes, Samantha L. and Pearce, Joshua M.}, - year = {2020}, - month = sep, - journal = {Materials}, - volume = {13}, - number = {19}, - pages = {4273}, - publisher = {{MDPI AG}}, - issn = {1996-1944}, - doi = {10.3390/ma13194273}, - urldate = {2020-10-12}, - abstract = {This study explores the potential to reach a circular economy for post-consumer Recycled Polyethylene Terephthalate (rPET) packaging and bottles by using it as a Distributed Recycling for Additive Manufacturing (DRAM) feedstock. Specifically, for the first time, rPET water bottle flake is processed using only an open source toolchain with Fused Particle Fabrication (FPF) or Fused Granular Fabrication (FGF) processing rather than first converting it to filament. In this study, first the impact of granulation, sifting, and heating (and their sequential combination) is quantified on the shape and size distribution of the rPET flakes. Then 3D printing tests were performed on the rPET flake with two different feed systems: an external feeder and feed tube augmented with a motorized auger screw, and an extruder-mounted hopper that enables direct 3D printing. Two Gigabot X machines were used, each with the different feed systems, and one without and the latter with extended part cooling. 3D print settings were optimized based on thermal characterization, and both systems were shown to 3D print rPET directly from shredded water bottles. Mechanical testing showed the importance of isolating rPET from moisture and that geometry was important for uniform extrusion. The mechanical strength of 3D-printed parts with FPF and inconsistent flow is lower than optimized fused filament, but adequate for a wide range of applications. Future work is needed to improve consistency and enable water bottles to be used as a widespread DRAM feedstock.}, - keywords = {3D printing,additive manufacturing,circular economy,distributed manufacturing,distributed recycling,PET,polymers,recycling,upcycle,waste plastic}, - file = {/Users/fabio/Zotero/storage/5KBZL4NJ/full-text.pdf} -} - -@article{Liu, - title = {Ecosystem {{Services}} in {{Life Cycle Assessment}} to {{Support Assessment}} and {{Design}} of {{Sustainable Engineering Systems}}}, - author = {Liu, Xinyu}, - year = {2018}, - urldate = {2021-08-31}, - file = {/Users/fabio/Zotero/storage/RT6U27HN/full-text.pdf} -} - -@article{Liu2006, - title = {Rapid Prototyping in Dentistry: {{Technology}} and Application}, - author = {Liu, Qingbin and Leu, Ming C. and Schmitt, Stephen M.}, - year = {2006}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {29}, - number = {3-4}, - pages = {317--335}, - issn = {02683768}, - doi = {10.1007/s00170-005-2523-2}, - abstract = {Medical imaging has been used to provide informa-tion for diagnostic and therapeutic purposes. The use of physical models provides added values in these applications. Rapid proto-typing (RP) techniques have long been employed to build com-plex 3D models in medicine. However, publications regarding the dental application of RP technologies are still rare. This paper reviews and discusses the basics and applications of RP tech-niques in dentistry: (1) construction of a computer aided design (CAD) model, including data acquisition, data processing, and the corresponding machines and CAD packages, (2) typical RP systems and how to choose them, and (3) current and potential use of RP techniques in dentistry. Practical application examples of RP techniques in dentistry are provided.}, - isbn = {0268-3768}, - keywords = {Computer aided design,Dentistry,Medical imaging,Rapid prototyping}, - file = {/Users/fabio/Zotero/storage/EE6J34HE/Rapid prototyping in dentistry technology and application.pdf} -} - -@article{Liu2017, - title = {A Large-Scale Double-Stage-Screw {{3D}} Printer for Fused Deposition of Plastic Pellets}, - author = {Liu, Xiaojun and Chi, Baihong and Jiao, Zhiwei and Tan, Jing and Liu, Fengfeng and Yang, Weimin}, - year = {2017}, - journal = {Journal of Applied Polymer Science}, - volume = {134}, - number = {31}, - pages = {1--9}, - issn = {10974628}, - doi = {10.1002/app.45147}, - abstract = {Fused deposition molding (FDM) is the most popular technology in the fields of three-dimensional printing, but it is hard to use a variety of plastic materials due to the limitation of filament form of material. Using plastic pellets as printing materials gives advantages in cost, processing speed, and available materials. In this work, a large-scale double-screw FDM three-dimensional printer based on plastic pellets has been designed. It is capable of printing large plastic products at a low cost and high speed. Using ABS+10\% GF as printing material, this work is first focused on the effects of the pressure and speed of the metering screw on the flowrate of melt. The equation for the relationship of these three parameters was established as well. Based on this equation, the effects of melt flow, printing speed, and layer thickness on the width of fused filament were investigated with experiments. Furthermore, the effects of printing spacing between fused filaments on surface accuracy and bonding strength were also explored. By printing models, it was revealed that the designed printer is able to print products with plastic pellets. (C) 2017 Wiley Periodicals, Inc.}, - isbn = {00218995}, - keywords = {bonding strength,FDM,melt flow,plastic pellets,surface accuracy,width of fused filament}, - file = {/Users/fabio/Zotero/storage/2J7YBFSL/A large-scale double-stage-screw 3D printer for fused depositionof plastic pellets.pdf} -} - -@article{Liu2018, - title = {Improvisation for Innovation: {{The}} Contingent Role of Resource and Structural Factors in Explaining Innovation Capability}, - author = {Liu, Yang and Lv, Diwei and Ying, Ying and Arndt, Felix and Wei, Jiang}, - year = {2018}, - month = jun, - journal = {Technovation}, - volume = {74--75}, - pages = {32--41}, - issn = {01664972}, - doi = {10.1016/j.technovation.2018.02.010} -} - -@article{Liu2018a, - title = {Are Exports of Recyclables from Developed to Developing Countries Waste Pollution Transfer or Part of the Global Circular Economy?}, - author = {Liu, Zhe and Adams, Michelle and Walker, Tony R.}, - year = {2018}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {136}, - pages = {22--23}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2018.04.005} -} - -@article{Liu2018b, - title = {Ecosystem Services in Life Cycle Assessment - {{Part}} 1: {{A}} Computational Framework}, - author = {Liu, Xinyu and Ziv, Guy and Bakshi, Bhavik R}, - year = {2018}, - journal = {Journal of Cleaner Production}, - volume = {197}, - pages = {314--322}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.06.164}, - urldate = {2021-09-06}, - abstract = {Explicit inclusion of the role of ecosystems in life cycle assessment (LCA) is needed to prevent the selection of alternatives that depend on or degrade scarce ecosystem services (ES), and to help identify opportunities for enhancing sustainability by not just reducing impact but also protecting and restoring ecosystems and the diverse goods and services they supply. Various approaches have been suggested for including ES in LCA but a general computational framework is not yet available. This paper extends the framework of conventional process LCA to assess and encourage techno-ecological synergies in life cycle assessment (TES-LCA). It includes ecosystem modules along with process modules in LCA. Analogous to the technology matrix in conventional LCA, TES-LCA defines a ``techno-ecological'' matrix. It consists of four components: a technology matrix defined by economic flows, an intervention matrix interpreted as the ES demanded by technological activities, an ecosystem matrix interpreted as the capacity of ecosystems to supply these services, and a management matrix to capture the interaction between technological and ecological systems. This work demonstrates the computational structure through a toy example and discuss the major challenges of TES-LCA in terms of data availability for an exhaustive array of ES. This work suggests that such data need to be made available and included in future versions of life cycle inventory databases. The computational structure of TES-LCA is able to capture the interactions between and within technological and ecological systems. It enables including of the role and capacity of ecosystems in a life cycle. The framework can encourage development of data and models to enable practical use of TES-LCA, which can provide unique insights into absolute environmental sustainability by quantifying overshoots for specific ES, and help identify improvement strategies based on improving technological efficiency and restoring ecosystems.}, - keywords = {Computational structure,Ecosystem service,Environmental sustainability,Life cycle assessment}, - file = {/Users/fabio/Zotero/storage/DTHDJC5X/full-text.pdf} -} - -@article{Liu2019, - title = {Exploring {{Innovation Ecosystem}} from the {{Perspective}} of {{Sustainability}}: {{Towards}} a {{Conceptual Framework}}}, - author = {{Liu} and {Stephens}}, - year = {2019}, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {3}, - pages = {48}, - doi = {10.3390/joitmc5030048}, - abstract = {With technology advancement, industrial revolution 4.0, businesses nowadays are in competition in terms of product, service and business model innovation. Meanwhile, the emergent socio-ecological crisis is making it increasingly important to identify the impact of business on environment and the society. To date, much literature has explored how sustainability might be achieved through firms' internal research and development, and supply chain collaboration. However, issues such as how different stakeholders including customers, partners, government, and universities can be involved, forming innovation ecosystem in a sustainable way is under-explored. This paper aims to provide connection between innovation and sustainability, through literature review and exploratory case studies. A conceptual framework is generated starting from firm/intra-firm level, to supply chain/inter-firm level, and towards ecosystem level. With emerging themes of innovation from sustainability perspective proposed, the framework can be enriched and validated through future empirical studies.}, - keywords = {innovation,innovation ecosystem,sustainability,sustainable innovation}, - file = {/Users/fabio/Zotero/storage/2KAXTUW8/Exploring Innovation Ecosystem from the Perspective of Sustainability Towards a Conceptual Framework.pdf} -} - -@article{Liu2019a, - title = {Current Advances and Future Perspectives of {{3D}} Printing Natural-Derived Biopolymers}, - author = {Liu, Jun and Sun, Lushan and Xu, Wenyang and Wang, Qianqian and Yu, Sujie and Sun, Jianzhong}, - year = {2019}, - month = mar, - journal = {Carbohydrate Polymers}, - volume = {207}, - pages = {297--316}, - issn = {01448617}, - doi = {10.1016/j.carbpol.2018.11.077}, - urldate = {2021-03-09}, - file = {/Users/fabio/Zotero/storage/AGVGUQQJ/Liu et al. - 2018 - Current advances and future perspectives of 3D printing natural-derived biopolymers.pdf} -} - -@article{Liu2019b, - title = {A Fuzzy Three-Stage Multi-Attribute Decision-Making Approach Based on Customer Needs for Sustainable Supplier Selection}, - author = {Liu, Aijun and Xiao, Yaxuan and Lu, Hui and Tsai, Sang-Bing and Song, Wei}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118043}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118043} -} - -@article{Liu2019c, - title = {Multi-Process Routes Based Remanufacturability Assessment and Associated Application on Production Decision}, - author = {Liu, Qingtao and Shang, Ziyu and Ding, Kai and Guo, Lei and Zhang, Lu}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {240}, - pages = {118114}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118114} -} - -@article{Liu2019d, - title = {Research on the Coordinated Development of Greenization and Urbanization Based on System Dynamics and Data Envelopment Analysis\textemdash\textemdash{{A}} Case Study of {{Tianjin}}}, - author = {Liu, Hongbo and Liu, Yunfeng and Wang, Huannan and Yang, Jiangye and Zhou, Xia}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {214}, - pages = {195--208}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.046} -} - -@article{Liu2019f, - title = {A Critical Review of Fused Deposition Modeling {{3D}} Printing Technology in Manufacturing Polylactic Acid Parts}, - author = {Liu, Zengguang and Wang, Yanqing and Wu, Beicheng and Cui, Chunzhi and Guo, Yu and Yan, Cheng}, - year = {2019}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {102}, - number = {9-12}, - pages = {2877--2889}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-019-03332-x}, - abstract = {Different from other 3D printing techniques such as selective laser sintering (SLS), stereolithography (SLA), three-dimensional printing (3DP), and laminated object manufacturing (LOM), the fused deposition modeling (FDM) technology is widely used in aerospace, automobile making, bio-medicals, smart home, stationery and training aids, and creative gifts for its easy use, simple operation, and low cost. The polylactic acid (PLA) is a material most extensively applied in FDM technology for its low melting point, non-poison, non-irritation, and sound biocompatibility. The FDM 3D-printed PLA parts are a research hotspot in the 3D printing field. This paper is intended to sum up the latest research results and achievements made in recent years in the interface bonding property, mechanical properties, and shape precision promotion of FDM 3D-printed PLA parts as well as the functional expansion of the PLA parts based on vast domestic and overseas literature. The literature research collection focuses on the following two aspects: one is the macroscopic technical research on the optimal settings of key technological parameters; the other one is the PLA modification research on improvement of cross-linking state and crystallinity of PLA molecular chains, carbon reinforced phase modification of PLA, and PLA functional compound modification. The researches in the two aspects are of importance in improving whole properties, enhancing functional applications, and expanding and enriching the applications of FDM 3D-printed PLA parts. This paper is expected to give some helps and references to the researchers who are specializing in the 3D printing field.}, - keywords = {Functional expansion,Fused deposition modeling (FDM),Mechanical properties,Polylactic acid (PLA)}, - file = {/Users/fabio/Zotero/storage/HBZFDZLT/a critical review of fused deposition modeling 3d printing technology in manufacturing polylactic acid parts.pdf} -} - -@article{Liu2019g, - title = {Ecosystem {{Services}} in {{Life Cycle Assessment}} While {{Encouraging Techno}}-{{Ecological Synergies}}}, - author = {Liu, Xinyu and Bakshi, Bhavik R.}, - year = {2019}, - month = apr, - journal = {Journal of Industrial Ecology}, - volume = {23}, - number = {2}, - pages = {347--360}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1088-1980}, - doi = {10.1111/jiec.12755}, - urldate = {2021-08-31}, - abstract = {Life cycle assessment (LCA) has enabled consideration of environmental impacts beyond the narrow boundary of traditional engineering methods. This reduces the chance of shifting impacts outside the system boundary. However, sustainability also requires that supporting ecosystems are not adversely affected and remain capable of providing goods and services for supporting human activities. Conventional LCA does not account for this role of nature, and its metrics are best for comparing alternatives. These relative metrics do not provide information about absolute environmental sustainability, which requires comparison between the demand and supply of ecosystem services (ES). Techno-ecological synergy (TES) is a framework to account for ES, and has been demonstrated by application to systems such as buildings and manufacturing activities that have narrow system boundaries. This article develops an approach for techno-ecological synergy in life cycle assessment (TES-LCA) by expanding the steps in conventional LCA to incorporate the demand and supply of ecosystem goods and services at multiple spatial scales. This enables calculation of absolute environmental sustainability metrics, and helps identify opportunities for improving a life cycle not just by reducing impacts, but also by restoring and protecting ecosystems. TES-LCA of a biofuel life cycle demonstrates this approach by considering the ES of carbon sequestration, air quality regulation, and water provisioning. Results show that for the carbon sequestration ecosystem service, farming can be locally sustainable but unsustainable at the global or serviceshed scale. Air quality regulation is unsustainable at all scales, while water provisioning is sustainable at all scales for this study in the eastern part of the United States.}, - keywords = {biofuel,ecosystem services,environmental metrics,industrial ecology,life cycle assessment (LCA),sustainability assessment}, - file = {/Users/fabio/Zotero/storage/C7BASSW5/full-text.pdf} -} - -@article{Liu2019h, - title = {Including {{Ecosystem Services}} in {{Life Cycle Assessment}}: {{Methodology}} and {{Application}} to {{Urban Farms}}}, - author = {Liu, Xinyu and Charles, Michael and Bakshi, Bhavik R.}, - year = {2019}, - journal = {Procedia CIRP}, - volume = {80}, - pages = {287--291}, - issn = {22128271}, - doi = {10.1016/j.procir.2018.12.004}, - urldate = {2021-09-20}, - abstract = {Conventional life cycle assessment (LCA) compares technological alternatives and chooses the one that has lower environmental impact, making it an approach for assessing relative sustainability. Such an approach largely ignores the role of ecosystem services (ES) and ecological carrying capacity, despite their essential role in sustaining all human activities. Such ignorance may lead to the over-dependence on scarce resources, perverse impacts on ecosystems, and lost opportunities for improvement. The framework of Techno-Ecological Synergy (TES) accounts for the demand and supply of ES at multiple spatial scales and defines metrics for absolute sustainability at both local and serviceshed scales. Applications of TES have been mainly focusing on localized systems. To prevent the shifting of impacts, a life cycle perspective is also needed. The authors have proposed the Techno-Ecological Synergy in Life Cycle Assessment (TES-LCA) framework by modifying each step in conventional LCA to incorporate the role of ecosystem goods and services. On one hand, TES-LCA advocates conventional solutions of impact reduction through technological improvements. On the other hand, it provides additional insights, including discovering novel ecological solutions to push toward absolute environmental sustainability. Thus, TES-LCA can offer a more comprehensive portfolio on sustainability performance evaluation. The substantial benefits of TES-LCA have been demonstrated by an application to urban farms.}, - keywords = {Computational Structure,Ecosystem Services,Life Cycle Assessment,Methodology}, - file = {/Users/fabio/Zotero/storage/86Y89BCC/full-text.pdf} -} - -@article{Liu2020, - title = {Evaluating the Employment Impact of Recycling Performance in {{Florida}}}, - author = {Liu, Yuan and Park, Sunjoo and Yi, Hongtao and Feiock, Richard}, - year = {2020}, - month = jan, - journal = {Waste Management}, - volume = {101}, - pages = {283--290}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.10.025} -} - -@article{Liu2020a, - title = {The Impact of Social and Ecological Factors on Environmentally Responsible Behavior}, - author = {Liu, Chang-Jiang and Hao, Fang}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {254}, - pages = {120173}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120173} -} - -@article{Liu2020b, - title = {The Micro-Foundations of Global Business Incubation: {{Stakeholder}} Engagement and Strategic Entrepreneurial Partnerships}, - author = {Liu, Yipeng}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120294}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120294}, - urldate = {2020-09-13}, - abstract = {This paper explores the micro-foundations of global business incubation by examining how stakeholders influence the development of technology business incubation platforms and entrepreneurial activities in the context of strategic entrepreneurial partnerships. By drawing from stakeholder theory, we propose a conceptual framework that articulates how stakeholder engagement\textemdash including local governments, universities, and business support organizations\textemdash varies over time by engaging with entrepreneurs in the form of collaborative partnerships. This paper investigates two technology business incubators in China and the UK through a comparative lens and offers empirical evidence to support its theoretical argumentation. From a temporal perspective, we found that different types of stakeholders play different roles in deploying three distinctive mechanisms\textemdash namely, initiating, orchestrating and partaking\textemdash during the developmental trajectory involved in the launch and development of entrepreneurial ventures. Importantly, from a micro-foundational perspective, we highlight the agency-orientated activities championed by entrepreneurial organizations situated in global strategic partnership contexts.}, - keywords = {International entrepreneurial partnership,Micro-foundation,Stakeholder theory,Technology business incubation,Temporality}, - file = {/Users/fabio/Zotero/storage/HH932XZE/full-text.pdf} -} - -@article{Liu2020c, - title = {Quantification and Valuation of Ecosystem Services in Life Cycle Assessment: {{Application}} of the Cascade Framework to Rice Farming Systems}, - author = {Liu, Xinyu and Bakshi, Bhavik R and Rugani, Benedetto and {de Souza}, Danielle Maia and Bare, Jane and Johnston, John M and Laurent, Alexis and Verones, Francesca}, - year = {2020}, - journal = {Science of the Total Environment}, - volume = {747}, - issn = {18791026}, - doi = {10.1016/j.scitotenv.2020.141278}, - urldate = {2021-09-06}, - abstract = {The integration of ecosystem service (ES) assessment with life cycle assessment (LCA) is important for developing decision support tools for environmental sustainability. A prequel study has proposed a 4-step methodology that integrates the ES cascade framework within the cause-effect chain of life cycle impact assessment (LCIA) to characterize the physical and monetary impacts on ES provisioning due to human interventions. We here follow the suggested steps in the abovementioned study, to demonstrate the first application of the integrated ES-LCIA methodology and the added value for LCA studies, using a case study of rice farming in the United States, China, and India. Four ES are considered, namely carbon sequestration, water provisioning, air quality regulation, and water quality regulation. The analysis found a net negative impact for rice farming systems in all three rice producing countries, meaning the detrimental impacts of rice farming on ES being greater than the induced benefits on ES. Compared to the price of rice sold in the market, the negative impacts represent around 2\%, 6\%, and 4\% of the cost of 1 kg of rice from China, India, and the United States, respectively. From this case study, research gaps were identified in order to develop a fully operationalized ES-LCIA integration. With such a framework and guidance in place, practitioners can more comprehensively assess the impacts of life cycle activities on relevant ES provisioning, in both physical and monetary terms. This may in turn affect stakeholders' availability to receive such benefits from ecosystems in the long run.}, - pmid = {32795796}, - keywords = {Cascade model,Cause-effect chain,Ecosystem services,Life cycle assessment (LCA),Life cycle impact assessment (LCIA),Rice farming}, - file = {/Users/fabio/Zotero/storage/Z7QZP9L8/full-text.pdf} -} - -@article{liuAnalysisPropertyManagement2019, - title = {Analysis of Property Management Ecological Behavior in {{China}} Based on the Grounded Theory: {{The}} Influencing Factors and the Behavior Model}, - author = {Liu, Xingmin and Zhou, Jingyang and Xue, Yutong and Qian, S.}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {44--56}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.300}, - urldate = {2020-06-07}, - abstract = {The prevailing property management philosophy in China is outdated and is therefore not useful for improving the sustainability of buildings and their facilities. However, the introduction and integration of basic ecological concepts in the existing studies of ecological property management theory has been limited. The analysis related to the methods for and the influencing factors on ecological behavior implementation has hardly been covered. Based on the use of grounded theory, this paper conducts an in-depth analysis of property management ecological behavior by setting the influencing factors as the research target. First, a literature review is conducted to identify the definition of property management ecological behavior. Based on the theory of planned behavior, a preliminary theoretical model of the factors influencing ecological behavior in property management is constructed. Then, the research framework and a data analysis scheme are designed based on grounded theory. An in-depth review is used to gather information on property management in community and public housing. The interview data are coded and analyzed with the help of NVivo11 software to identify the influencing factors of the property management ecological behavior in China. Studies have shown that factors influencing property management ecological behavior include stimulus, status, scenario, and result. The stimulus factors include government regulations, market pressure, and social supervision. The status factors include scale, nature, capabilities, value, environmental awareness of managers, and financial situation. The scenario factors include service cost, resource availability, object factor, and owner willingness. The result factors include the profits of the company and the satisfaction of the owners. This study comprehensively identifies the influencing factors of the property management ecological behavior in China and enriches the definition of property management ecological behavior. A theoretical model of influencing factors of property management ecological behavior is built and employed to systematically analyze the characteristics of the ecological behavior of property service companies. This study provides a foundation for further analysis of the mechanisms guiding ecological behavior among property management companies in China.}, - keywords = {Ecological behavior,Grounded theory,Influencing factors,Property management} -} - -@article{liuCurrentResearchProgress2023, - title = {Current Research Progress of Physical and Biological Methods for Disposing Waste Plastics}, - author = {Liu, Yanbing and Shi, Jinwen and Jin, Hui and Guo, Liejin}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {408}, - pages = {137199}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137199}, - urldate = {2023-05-01}, - abstract = {Overuse of plastic products has caused serious hazards to ecological environment, and effective technologies were needed urgently to overcome the drawbacks of existing methods. Mechanisms and representative studies of physical and biological methods to dispose plastics were summarized in this review, and the advantages and disadvantages of both methods were pointed out. Physical treatment of plastics involved the extrusion or deformation of plastics, which were subsequently used in virgin plastics, construction, concrete and some composites. This disposal method was simple and non-polluting, but has limited fields of application. Biodegradation of plastics could be achieved by microorganisms (fungi, bacteria and algae) in the ecosystem, undergoing colonization, biodeterioration, biofragmentation, assimilation and mineralization, eventually converting plastics into CO2 and H2O. Conditions for biodegrading plastics were mild and products were non-polluting, but the process was very slow. From the results, single method for treating plastics has certain limitations, and combining different methods has become hot topic of study. Such as the combination of physical and chemical methods could improve the miscibility of polymers or modify plastics to produce copolymers. Plastics could be pretreated by heat or ultrasound to reduce the hydrophobicity and activation energy of the reaction. Moreover, combining biodegradation and photodegradation of plastics was also an effective way to improve the degradation efficiency of plastics.}, - langid = {english}, - keywords = {Biological method,Physical method,Plastic,Waste disposing}, - file = {/Users/fabio/Zotero/storage/2BJ8LY3Z/Liu et al_2023_Current research progress of physical and biological methods for disposing.pdf;/Users/fabio/Zotero/storage/2JFBSD6J/S0959652623013574.html} -} - -@article{liuCurrentSituationKey2021, - title = {Current Situation and Key Challenges on the Use of Single-Use Plastic in {{Hanoi}}}, - author = {Liu, Chen and Thang Nguyen, Trung and Ishimura, Yujiro}, - year = {2021}, - month = feb, - journal = {Waste Management}, - volume = {121}, - pages = {422--431}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.12.033}, - urldate = {2021-02-05}, - abstract = {Marine plastic litter, mostly comprising single-use plastics, has been recognised as one of the world's most urgent environmental concerns, and Vietnam has been ranked as one of the top five countries polluting the ocean with plastic waste. This paper examines Hanoi as a case study on single-use plastic by households, investigating the daily generation of single-use plastic waste through a survey, assessing existing policy gaps through a policy review, and providing recommendations on improving management along the supply chain in Vietnam. At almost 27 times a week on average, plastic shopping bags were found to be the most prevalent single-use plastic used by households, followed by wrap/film, straws, coffee cups with plastic lids, cutlery, takeout containers, food packaging, party cups, bottles for water and beverages, and other items. Plastic shopping bags and food packaging are used more often in rural areas than in urban areas. These bags also have a high rate (68.65\%) of temporary reuse as kitchen bin liners, a habit that may be difficult to change over the short term. Apart from some components of plastic bottles and packaging that are sold for recycling, most single-use plastic waste is disposed in landfills. Policies are in place to address plastic issues, such as a tax on plastic bags and source separation, but implementation is inconsistent. A behaviour-based combination of top-town and bottom-up approaches along the entire supply chain is recommended to improve existing policy gaps in Vietnam.}, - keywords = {Hanoi,Household,Lifestyle,Plastic waste,Single-use} -} - -@article{liuDevelopingGISbasedModel2022, - title = {Developing a {{GIS-based}} Model to Quantify Spatiotemporal Pattern of Home Appliances and e-Waste Generation\textemdash{{A}} Case Study in {{Xiamen}}, {{China}}}, - author = {Liu, Yupeng and Song, Lulu and Wang, Wanjun and Jian, Xiaomei and Chen, Wei Qiang}, - year = {2022}, - month = jan, - journal = {Waste Management}, - volume = {137}, - pages = {150--157}, - publisher = {{Pergamon}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2021.10.039}, - urldate = {2021-12-01}, - abstract = {The growing amount of electronic waste (e-waste) poses considerable risks to the environment and human health, especially when treated inadequately. However, it is difficult to assess the significance of these issues without quantitative understanding of spatiotemporal patterns of e-waste generation. This paper proposes a new model to estimate in-use stock of electric household appliances (HAs) and e-waste generation at the level of 1 km \texttimes{} 1 km grids by coupling geographic information system (GIS) and material flow analysis (MFA). We took Xiamen, a rapidly urbanized city in China, as a case and the results showed that demands for HAs increased from 1980, peaked in 2016, and then declined. In-use HAs exhibited a logistic growth and significantly increased in both spatial extent and intensity. E-waste generation kept rising until 2019, and its spatial center expanded outward from downtown to suburban areas. Our study highlights that a dynamic and spatial model is useful for designing effective policies for e-waste management by providing spatiotemporal details of e-waste types and generation magnitudes and explicitly recognizing generation hotspots in cities.}, - pmid = {34773908}, - keywords = {High-resolution urban grids (HUGs),Industrial ecology,Material flow analysis,Spatial analysis,Urbanization,WEEE} -} - -@article{liuEcosystemServiceshumanWellbeing2021, - title = {Ecosystem Services-Human Wellbeing Relationships Vary with Spatial Scales and Indicators: {{The}} Case of {{China}}}, - author = {Liu, Lumeng and Wu, Jianguo}, - year = {2021}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {172}, - pages = {105662}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105662}, - urldate = {2021-06-10} -} - -@article{liuEcosystemServicesLife2018, - title = {Ecosystem Services in Life Cycle Assessment-{{Part}} 2: {{Adaptations}} to Regional and Serviceshed Information}, - author = {Liu, Xinyu and Ziv, Guy and Bakshi, Bhavik R}, - year = {2018}, - doi = {10.1016/j.jclepro.2018.05.283}, - urldate = {2021-09-06}, - abstract = {Regionalized life cycle assessment (LCA) is receiving more attention among LCA practitioners due to spatial variation in process efficiency of technological systems and current status of ecological systems. However, the role of ecosystem services (ES) in supporting technological activities is still ignored. Techno-Ecological Synergies in Life Cycle Assessment (TES-LCA) is a methodology that captures the interactions between and within technological and ecological systems, along a product's life cycle. It accounts for local and absolute environmental sustainability by comparing the demand and supply of ES at multiple spatial scales. To facilitate its wider adoption, the basic computational framework has been proposed in Part 1, which includes technologies and ecosystems in an integrated manner. To handle the complications induced by explicitly considering ES, which operate within servicesheds at multiple spatial scales, the TES-LCA computational structure is modified to account for spatial variation in technological and ecological systems in Part 2. The regionalized TES-LCA framework is demonstrated through an expanded case study to show its capability to capture different scenarios of regionalization, including variation in process efficiency, ecological carrying capacity (CC), characterization factors (CF), and the scales at which ES operate. The approach is then proved to be general and able to subsume existing approaches, such as regionalized LCA, GIS-LCA and recent extensions based on normalizing CF by ecological CC to calculate absolute sustainability metrics. It is recommended that the developed computational structure should be implemented in LCA software with the functionality for handling geographical information. Also, the regionalized information about ES demand and supply needs to be made available in future versions of life cycle inventory databases.}, - keywords = {Computational structure,Ecosystem service,Environmental sustainability,Life cycle assessment}, - file = {/Users/fabio/Zotero/storage/UTUBNDC4/full-text.pdf} -} - -@article{liuEnvironmentalImpactsCharacterization2020, - title = {Environmental Impacts Characterization of Packaging Waste Generated by Urban Food Delivery Services. {{A}} Big-Data Analysis in {{Jing-Jin-Ji}} Region ({{China}})}, - author = {Liu, Gengyuan and Agostinho, Feni and Duan, Huabo and Song, Guanghan and Wang, Xueqi and Giannetti, Biagio F. and Santagata, Remo and Casazza, Marco and Lega, Massimiliano}, - year = {2020}, - month = nov, - journal = {Waste Management}, - volume = {117}, - pages = {157--169}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.07.028}, - urldate = {2020-08-22} -} - -@article{liuGranulebasedMaterialExtrusion2023, - title = {Granule-Based Material Extrusion Is Comparable to Filament-Based Material Extrusion in Terms of Mechanical Performances of Printed {{PLA}} Parts: {{A}} Comprehensive Investigation}, - shorttitle = {Granule-Based Material Extrusion Is Comparable to Filament-Based Material Extrusion in Terms of Mechanical Performances of Printed {{PLA}} Parts}, - author = {Liu, Handai and Gong, Ke and Portela, Alexandre and Cao, Zhi and Dunbar, Ronan and Chen, Yuanyuan}, - year = {2023}, - month = aug, - journal = {Additive Manufacturing}, - volume = {75}, - pages = {103744}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2023.103744}, - urldate = {2023-08-31}, - abstract = {To implement a circular economic life for thermoplastic waste, such as polylactic acid (PLA) waste from filament-based material extrusion (FME) printing and reduce the costs associated with producing filaments for the FME process, a granule-based material extrusion (GME) printer was developed by modifying a filament-based extrusion head with a granule-based extrusion head. However, concerns have been raised about the mechanical performance of parts printed using the GME method. Previous studies have reported mixed results, with some finding inferior mechanical performance of GME printed parts compared to FME counterparts, while others reported comparable or slightly better performance. Moreover, these studies were limited to tensile or flexural performance evaluations, lacked a clear explanation to support them. Therefore, to address this uncertainty and research gaps, a comprehensive mechanical performance comparison and analysis study was conducted among the specimens printed by these two types of material extrusion printers. Characterization tests were conducted, including tensile tests, impact tests, 3-point bending tests, and hardness tests, to reveal the comprehensive mechanical properties of the printed parts. Furthermore, scanning electron microscope (SEM) tests, differential scanning calorimetry (DSC) tests, thermal imaging, rheological tests, and gel permeation chromatography (GPC) tests were carried out to analyze and explain the results. The results indicated no significant differences (P~{$>~$}0.05) in the mechanical properties of FME and GME printed parts in terms of tensile properties, flexural strength and modulus, and impact strength. However, there was a significant difference in shore D hardness and bending strain at break between the two methods, and the complex viscosity of GME printed samples was greater than that of FME counterparts. Remarkably, the average molecular weights of GME printed samples were higher than those of FME ones, which can be attributed to lower actual temperature of the GME extrusion chamber due to its different location among the heater, thermistor and melting chamber compared to the FME extrusion head.}, - keywords = {3D printing,Filament-based material extrusion,Granule-based material extrusion,Mechanical performance,Polylactic acid,Thermal degradation}, - file = {/Users/fabio/Zotero/storage/USQWFS9E/S2214860423003573.html} -} - -@article{liuInfluenceArtificialIntelligence2020, - title = {Influence of Artificial Intelligence on Technological Innovation: {{Evidence}} from the Panel Data of China's Manufacturing Sectors}, - author = {Liu, Jun and Chang, Huihong and Forrest, Jeffrey Yi-Lin and Yang, Baohua}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120142}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120142}, - urldate = {2020-06-18} -} - -@article{liuIntegratedPhysicalApproach2023, - title = {Integrated Physical Approach to Assessing Urban-Scale Building Photovoltaic Potential at High Spatiotemporal Resolution}, - author = {Liu, Zhaoru and Liu, Xue and Zhang, Haoran and Yan, Da}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {388}, - pages = {135979}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.135979}, - urldate = {2023-02-09}, - abstract = {Assessing the urban-scale building photovoltaic (PV) potential is important for designing urban environments, retrofitting existing structures, or integrating PVs with grids. However, few studies have considered high-temporal-resolution simulations, the facade PV potential, and a comprehensive PV model simultaneously; thus, the overall accuracy of the estimation of PV potential may be limited. Therefore, this study developed an integrated framework to assess the urban-scale PV potential of rooftops and facades at high spatiotemporal resolution. The proposed approach integrates an anisotropic sky diffuse model, a vector-based shading calculation method, and a temperature-related PV performance model. The annual PV potential and spatial/temporal characteristics were analyzed in a case study of over 170,000 buildings in Beijing. The results showed that the estimated rooftop PV power generation was 7.55 TWh/y, whereas the facade PV power generation was 18.07 TWh/y, which was 239\% of the rooftop PV yield. The integrated model estimated PV yield with higher accuracy than the simplified models by depicting more details. The proposed approach can be applied to the large-scale assessment of future energy systems with increasing penetration of PVs, and the results can support effective policies for the integration of PVs into the built environment in dense cities.}, - langid = {english}, - keywords = {Roof and facade,Solar energy,Solar photovoltaic (PV) potential,Spatiotemporal modeling,Urban building energy modeling}, - file = {/Users/fabio/Zotero/storage/RYEVDJLS/Liu et al. - 2023 - Integrated physical approach to assessing urban-sc.pdf;/Users/fabio/Zotero/storage/2NBTJ7LT/S0959652623001373.html} -} - -@article{Liukkonen2016, - title = {Toward Decentralized Intelligence in Manufacturing: Recent Trends in Automatic Identification of Things}, - author = {Liukkonen, Mika and Tsai, Tsung Nan}, - year = {2016}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {87}, - number = {9-12}, - pages = {2509--2531}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-016-8628-y}, - abstract = {\textcopyright{} 2016, Springer-Verlag London. Development of decentralized solutions for managing individual products in manufacturing and postmanufacturing applications makes it possible to embed automation in the product flow, which is more efficient compared to the conventional approach based on automating individual unit processes. The decentralized approach can be enabled using manufacturing objects that are capable of negotiating with their environment, observing it, making decisions according to these observations, and sharing information on their status and needs. For these purposes, automatic identification (auto-ID) technology is required. Automatic identification involves techniques for automatically identifying things by using tokens with individual codes, collecting information on them, and transferring that information automatically into computer systems. In general, not only techniques such as barcode, optical character recognition (OCR), and Radio Frequency Identification (RFID) are associated with auto-ID but also other techniques that are less used in manufacturing can be highlighted. The present study seeks to map the existing techniques for automatic identification of objects and to determine their most potential targets of use in manufacturing.}, - keywords = {Auto-ID,Factory of Things,Identification,Manufacturing,Traceability}, - file = {/Users/fabio/Zotero/storage/UDUE74GL/Toward decentralized intelligence in manufacturing- recenttrends in automatic identification of things.pdf} -} - -@article{liuPlasticCreditConsortium2021, - title = {Plastic Credit: {{A}} Consortium Blockchain-Based Plastic Recyclability System}, - author = {Liu, Chao and Zhang, Xiaoshuai and Medda, Francesca}, - year = {2021}, - month = feb, - journal = {Waste Management}, - volume = {121}, - pages = {42--51}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.11.045}, - urldate = {2020-12-21} -} - -@article{liuQualityAssessmentPostconsumer2021, - title = {Quality Assessment of Post-Consumer Plastic Bottles with Joint Entropy Method: {{A}} Case Study in {{Beijing}}, {{China}}}, - author = {Liu, Ying and Zheng, Zhiyuan and Zhao, Lu and Wang, Zhen}, - year = {2021}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {175}, - pages = {105839}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105839}, - urldate = {2021-08-24} -} - -@article{liuRealtimeMultiscalePrediction2021, - title = {Real-Time Multiscale Prediction of Structural Performance in Material Extrusion Additive Manufacturing}, - author = {Liu, Xin and Kan, Chen and Ye, Zehao}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - pages = {102503}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102503}, - urldate = {2021-11-30} -} - -@article{liuTurningPointUrban2021, - title = {The Turning Point between Urban Vegetation and Artificial Surfaces for Their Competitive Effect on Land Surface Temperature}, - author = {Liu, Yue and Huang, Xin and Yang, Qiquan and Cao, Yinxia}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {292}, - pages = {126034}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126034}, - urldate = {2021-02-14}, - abstract = {As the two most common types of land cover in cities, vegetation (Veg) and artificial surfaces (AS) often exhibit competitive effects, i.e., cooling effect and warming effect, on land surface temperature (LST). Hitherto, the change of this competitive effect along the proportion gradient of AS within urban areas and their implications for urban construction still lacks adequate attention and discussion. To fill this gap, we made a quantitative analysis of the relationship between Veg (trees or grassland), AS and LST in 35 major cities of China by using Ziyuan-3 (ZY-3) high-resolution satellite observations. Results found that: (1) in each city, there exists a certain threshold (or ``turning point'') along the proportion gradient of AS, exceeds which AS replaces Veg as the variable that have dominant effect on LST (i.e., the warming effect of AS is always stronger than the cooling effect of Veg); (2) for most cities, the turning points of AS for grassland and trees are 60\% and 70\%, respectively; (3) the turning point for cities at a higher development level is lower, indicating that even a relatively low AS coverage ({$\sim$}50\textendash 60\%) in these areas can lead to an evident rise in LST; 4) compared to cities in temperate and tropical climate zones, the turning point for arid/semi-arid cities is higher, implying that their urban Veg shows a better performance in mitigating urban heat stress. This study represents a systematic investigation of the competitive effect of urban Veg and AS on LST, and the understanding of turning point provides a new perspective for stakeholders to integrate urban development and temperature regulation in planning initiatives.}, - keywords = {Background climate,Cooling effect,High-resolution,Remote sensing,Urban thermal environment,Warming effect} -} - -@article{liuUnlockingSystemTransitions2023, - title = {Unlocking System Transitions for Municipal Solid Waste Infrastructure: {{A}} Model for Mapping Interdependencies in a Local Context}, - shorttitle = {Unlocking System Transitions for Municipal Solid Waste Infrastructure}, - author = {Liu, Zhaowen and Schraven, Daan and {de Jong}, Martin and Hertogh, Marcel}, - year = {2023}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {198}, - pages = {107180}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107180}, - urldate = {2023-08-31}, - abstract = {Rapid global urbanization, urban renewal and changes in people's lifestyles have led to both an increase in waste generation and more complex waste types. In response to these changes, many local governments have invested in municipal solid waste infrastructure (MSWI) to implement circular strategies. However, matching and bridging the costly and logistically complex MSWI with the dynamic social context is a central challenge. In this paper we aim to explore the interdependencies between MSWI and the local social system, and then conceptualize and empirically validate the systemic nature of MSWI. We first review the current MSW treatment methods, corresponding infrastructure, and the challenges facing them. Then, we interrogate system-oriented concepts and use two key insights to set up a conceptual model for mapping the interdependencies in a MSWI system (MSWIS). Finally, a case study of the Dutch city of Almere is used to empirically validate the MSWIS model and identify the social systems that contribute to the development of the MSWIS. The analysis reveals that the development of MSWIS is beyond the municipality's control: efficient resource recovery facilities established by businesses under market rules and waste reuse facilities constructed by social organizations/individuals based on their own needs are key pieces of the puzzle to complete the MSWIS. This highlights the ability of the framework to capture interdependencies that go further than just the formal municipal sphere of influence.}, - keywords = {Circular economy,Socio-technical systems,System of systems,Waste infrastructure,Waste management}, - file = {/Users/fabio/Zotero/storage/YY6ND2CE/S0921344923003154.html} -} - -@article{liveleyFuturesLiteracyNarrative2021, - title = {Futures Literacy through Narrative}, - author = {Liveley, Genevieve and Slocombe, Will and Spiers, Emily}, - year = {2021}, - month = jan, - journal = {Futures}, - volume = {125}, - pages = {102663}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102663}, - urldate = {2020-12-14}, - file = {/Users/fabio/Zotero/storage/U7HNDUQ7/full-text.pdf} -} - -@article{lizarraldeFrameworkIntegrationConviviality2018, - title = {A Framework for the Integration of the Conviviality Concept in the Design Process}, - author = {Lizarralde, Iban and Tyl, Benjamin}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - series = {Technology and {{Degrowth}}}, - volume = {197}, - pages = {1766--1777}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2017.03.108}, - urldate = {2022-10-11}, - abstract = {Although the impact of technology on society has been widely studied in the literature, few studies have proposed a practical approach directly engaging stakeholders, including designers and engineers, in the development of new products and services. Within the degrowth movement, some approaches criticizing the western model of development suggest original criteria that could be integrated in the design process. The current study seeks to analyze the conviviality concept of Ivan Illich (1973) to develop a new framework for designers. To that end, current design literature and four industrial case studies were analyzed according to the five main threats to conviviality: the biological degradation of the ecosystem, radical monopoly, over-programming, polarization, and obsolescence. As a result, this paper proposes a framework that includes two guidelines: one for product scope and another for the socio-technical system scope. The guidelines are composed of a set of recommendations that emerge from the relationship between the threats to conviviality and life cycle stages of a product or service. These recommendations allow designers and engineers to better approach the complexity of the design process and co-create a strong sustainable society with stakeholders.}, - langid = {english}, - keywords = {Bicycle,Conviviality,Degrowth,Eco-design,Multi-case studies,Participatory research,Sustainable design}, - file = {/Users/fabio/Zotero/storage/9NM23NHR/Lizarralde y Tyl - 2018 - A framework for the integration of the convivialit.pdf;/Users/fabio/Zotero/storage/D3S4ZIJR/S0959652617305528.html} -} - -@article{llorente-gonzalezResourcesConservationRecycling2020, - title = {Resources , {{Conservation}} \& {{Recycling How}} Labour-Intensive Is the Circular Economy ? {{A}} Policy-Orientated Structural Analysis of the Repair , Reuse and Recycling Activities in the {{European Union}}}, - author = {{Llorente-Gonz{\'a}lez}, Leandro Javier and Vence, Xavier}, - year = {2020}, - month = nov, - journal = {Resources, Conservation \& Recycling}, - volume = {162}, - number = {November}, - pages = {1--11}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2020.105033}, - urldate = {2020-07-14}, - abstract = {The socio-economic structural conditions for the transition towards a circular economy (CE) are little explored, as most of the research is concerned with technical and organizational aspects. The few studies addressing the matter focus on the estimation of GDP growth and job creation potential of certain "circular activities'' (CA). These CA are assumed to be labour-intensive, so job losses resulting from the paradigm shift should be offset by the overall gains. However, significant structural differences in the economic characteristics of these activities suggest that their development may have dissimilar socio-economic implications, while their promotion would require diverse policy instruments. This paper aims to study the current sectoral structure, main economic features and recent evolution of the CA in the European Union. The focus is on the 24 activities that, according to the NACE Rev. 2, compose the repair, reuse and recycling sectors, as a limited yet representative subset of all the CA currently bound and constrained within the predominant linear economy. Results show that significant differences in labour intensity exist between repair and reuse, on the one hand, and recycling, on the other. Besides, employment concentrates in low-wage labour-intensive CA, suggesting that more attention should be paid to improving competitiveness and working conditions in activities such as repair and reuse which are by definition both ecological and inclusive. Also, the structural heterogeneity of the activities under analysis imply the need for targeted policy instruments tailored to the specificities of each of the various CE sub-sectors.}, - keywords = {Capital intensity,Circular economy,Labour intensity,Labour productivity,Sectoral structure,Targeted policy} -} - -@article{loarne-lemaireWomenInnovationProcesses2020, - title = {Women in Innovation Processes as a Solution to Climate Change: {{A}} Systematic Literature Review and an Agenda for Future Research}, - author = {{Loarne-Lemaire}, S{\'e}verine Le and Bertrand, Ga{\"e}l and Razgallah, Meriam and Maalaoui, Adnane and Kallmuenzer, Andreas}, - year = {2020}, - month = nov, - journal = {Technological Forecasting and Social Change}, - pages = {120440}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120440}, - urldate = {2020-12-14}, - abstract = {This paper focuses on identifying the means to tackle climate change as it explores the key role women could play in developing and enhancing innovation. Based on a systematic literature review (SLR) of 1,275 journal articles, we explore the impact of a stronger presence of women within institutions, including companies, to take on climate change. We also look at the need to properly align public policies and combat climate change while engaging global companies in the process. The SLR shows that more women within the technological innovation process promise greater productivity and better results. It also reveals that women tend to adopt innovations that have proven to be efficient. We argue that more women in science would contribute to accelerating the development of the necessary technological innovation to counter climate change and promote continued awareness about it. We also argue that more female board members in large companies and public institutions would contribute to not only appropriate climate change policies, but also to a move away from ``gadget'' technologies that fail to effectively fight rising global temperatures. The article concludes with a discussion of whether we need more women or feminine qualities within innovation processes.}, - keywords = {Climate change,Gender,Innovation,Slr,Women} -} - -@misc{Lofthi, - title = {Plastic / {{Polymer Recycling}}}, - author = {Lofthi, A.}, - year = {2009}, - urldate = {2014-06-25}, - howpublished = {http://www.lotfi.net/recycle/plastic.html} -} - -@article{logsdonQuantitativeApproachEvaluating2013, - title = {A Quantitative Approach to Evaluating Ecosystem Services}, - author = {Logsdon, Rebecca A. and Chaubey, Indrajeet}, - year = {2013}, - month = may, - journal = {Ecological Modelling}, - volume = {257}, - pages = {57--65}, - publisher = {{Elsevier}}, - issn = {03043800}, - doi = {10.1016/j.ecolmodel.2013.02.009}, - urldate = {2021-04-23}, - abstract = {Ecosystem services are benefits that humans receive from their environment. The amount of research that has been done on the concept of ecosystem services has increased substantially in recent years. However, the concept of ecosystem services has been slow to affect actual land management, economic and policy decisions. We argue that one reason for this lack of application is the disparity of methods to quantify ecosystem services. Much of the current ecosystem service research has been done on valuing ecosystem services, with little work done to quantify them so that they can be used as an end point of watershed management. We propose methods to quantify five provisional and regulatory ecosystem services with inputs related to ecosystem functions. We demonstrate the effectiveness of these methods by applying them to a study watershed and then running three extreme land use scenarios for the watershed: all forested, all urban and all corn. Results show that the methods capture the differences in land use on ecosystem service provision. These methods can be a building block for quantification of the full suite of ecosystem services by incorporating more biophysical models and developing validation methods. \textcopyright{} 2013 Elsevier B.V.}, - keywords = {Ecosystem services,Land management,Quantification,Soil and Water Assessment Tool (SWAT)} -} - -@article{lohMorethanhumanPerspectiveUnderstanding2020, - title = {A More-than-Human Perspective on Understanding the Performance of the Built Environment}, - author = {Loh, Susan and Foth, Marcus and Caldwell, Glenda Amayo and {Garcia-Hansen}, Veronica and Thomson, Mark}, - year = {2020}, - month = jul, - journal = {Architectural Science Review}, - volume = {63}, - number = {3-4}, - pages = {372--383}, - publisher = {{Taylor and Francis Ltd.}}, - issn = {17589622}, - doi = {10.1080/00038628.2019.1708258}, - urldate = {2022-03-13}, - abstract = {The ready availability and widespread deployment of IoT devices and sensors enable a high granularity of quantitative data to be collected to give a real-time appraisal of a building's environmental performance. Rating and assessment frameworks are increasingly taking advantage of insights that can be derived from both new building technology and big data analytics. Yet, climate change action requires new perspectives that move towards a post-anthropocentric and more-than-human viewpoint. This paper makes a threefold contribution. In order to highlight a gap, we (1) critique select Green Building Rating Tools, (2) contrast current achievements and targets with what climate change action demands of the built environment's performance; and (3) we discuss several causes for the disconnect between actual and aspirational ends of the performance measurement spectrum and offer some possible responses and actions with a view to stimulate scholarly debate and engagement to leapfrog the performance of the built environment.}, - keywords = {digital,ecology,energy,Green building,measurement,more-than-human,performance,rating tools} -} - -@article{Lombardi2019, - title = {The Sustainability of the {{Italian}} Water Sector: {{An}} Empirical Analysis by {{DEA}}}, - author = {Lombardi, G.V. and Stefani, G. and Paci, A. and Becagli, C. and Miliacca, M. and Gastaldi, M. and Giannetti, B.F. and Almeida, C.M.V.B.}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {227}, - pages = {1035--1043}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.283} -} - -@misc{Lombardi2022, - title = {Consumption {{Corridors}} as a New Paradigm of Sustainability}, - author = {Lombardi, Alessia and Cembalo, Luigi}, - year = {2022}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {184}, - pages = {106423}, - publisher = {{Elsevier}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2022.106423}, - urldate = {2022-05-30}, - isbn = {2022.106423}, - keywords = {Circular economy,Consumption,Consumption Corridors,Corridors,Sufficiency}, - file = {/Users/fabio/Zotero/storage/LLZGQEGG/Lombardi, Cembalo - 2022 - Consumption Corridors as a new paradigm of sustainability.pdf} -} - -@article{Lomborg2020, - title = {Welfare in the 21st Century: {{Increasing}} Development, Reducing Inequality, the Impact of Climate Change, and the Cost of Climate Policies}, - author = {Lomborg, Bjorn}, - year = {2020}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {156}, - pages = {119981}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119981}, - urldate = {2020-05-15}, - abstract = {Climate change is real and its impacts are mostly negative, but common portrayals of devastation are unfounded. Scenarios set out under the UN Climate Panel (IPCC) show human welfare will likely increase to 450\% of today's welfare over the 21st century. Climate damages will reduce this welfare increase to 434\%. Arguments for devastation typically claim that extreme weather (like droughts, floods, wildfires, and hurricanes) is already worsening because of climate change. This is mostly misleading and inconsistent with the IPCC literature. For instance, the IPCC finds no trend for global hurricane frequency and has low confidence in attribution of changes to human activity, while the US has not seen an increase in landfalling hurricanes since 1900. Global death risk from extreme weather has declined 99\% over 100 years and global costs have declined 26\% over the last 28 years. Arguments for devastation typically ignore adaptation, which will reduce vulnerability dramatically. While climate research suggests that fewer but stronger future hurricanes will increase damages, this effect will be countered by richer and more resilient societies. Global cost of hurricanes will likely decline from 0.04\% of GDP today to 0.02\% in 2100. Climate-economic research shows that the total cost from untreated climate change is negative but moderate, likely equivalent to a 3.6\% reduction in total GDP. Climate policies also have costs that often vastly outweigh their climate benefits. The Paris Agreement, if fully implemented, will cost \$819\textendash\$1,890 billion per year in 2030, yet will reduce emissions by just 1\% of what is needed to limit average global temperature rise to 1.5\textdegree C. Each dollar spent on Paris will likely produce climate benefits worth 11\textcent. Long-term impacts of climate policy can cost even more. The IPCC's two best future scenarios are the ``sustainable'' SSP1 and the ``fossil-fuel driven'' SSP5. Current climate-focused attitudes suggest we aim for the ``sustainable'' world, but the higher economic growth in SSP5 actually leads to much greater welfare for humanity. After adjusting for climate damages, SSP5 will on average leave grandchildren of today's poor \$48,000 better off every year. It will reduce poverty by 26 million each year until 2050, inequality will be lower, and more than 80 million premature deaths will be avoided. Using carbon taxes, an optimal realistic climate policy can aggressively reduce emissions and reduce the global temperature increase from 4.1\textdegree C in 2100 to 3.75\textdegree C. This will cost \$18 trillion, but deliver climate benefits worth twice that. The popular 2\textdegree C target, in contrast, is unrealistic and would leave the world more than \$250 trillion worse off. The most effective climate policy is increasing investment in green R=D to make future decarbonization much cheaper. This can deliver \$11 of climate benefits for each dollar spent. More effective climate policies can help the world do better. The current climate discourse leads to wasteful climate policies, diverting attention and funds from more effective ways to improve the world.}, - file = {/Users/fabio/Zotero/storage/4GGYPI4J/Welfare in the 21st century- Increasing development, reducing inequality, the impact of climate change, and the cost of climate policies.pdf} -} - -@article{loncaAssessingScalingEffects2020, - title = {Assessing Scaling Effects of Circular Economy Strategies: {{A}} Case Study on Plastic Bottle Closed-Loop Recycling in the {{USA PET}} Market}, - author = {Lonca, Geoffrey and Lesage, Pascal and {Majeau-Bettez}, Guillaume and Bernard, Sophie and Margni, Manuele}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105013}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105013}, - urldate = {2020-07-21} -} - -@article{Longato2021, - title = {Practical Applications of Ecosystem Services in Spatial Planning: {{Lessons}} Learned from a Systematic Literature Review}, - author = {Longato, Davide and Cortinovis, Chiara and Albert, Christian and Geneletti, Davide}, - year = {2021}, - month = may, - journal = {Environmental Science \& Policy}, - volume = {119}, - pages = {72--84}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.02.001}, - urldate = {2021-03-08}, - abstract = {The integration of ecosystem service (ES) knowledge into decision-making processes is increasingly endorsed by various policies and initiatives, with spatial planning targeted as one of the most relevant fields. Learning and feeding back from existing experiences is therefore a fundamental step to ensure appropriate and useful support by ES science. This paper aims to gather and critically analyse how ES science contributes to spatial planning practices. Through a systematic review of the literature about ES use in spatial planning, we map the level of integration of ES knowledge, the scale of case studies, and the type of planning addressed; and we identify and analyse case studies of real-world applications. Studies explicitly aimed at supporting spatial planning have increased over the last decade, but are still scarce. The real-world case studies reveal advantages of integrating ES knowledge into spatial planning processes, mainly concerning practical aspects such as synthesizing complex socio-environmental information and promoting participation. Windows of opportunity offered by regulatory frameworks and innovative processes and instruments, such as marine spatial plans and strategic environmental assessments, are key factors triggering the integration. However, supportive contextual conditions are necessary, including science-policy collaborations across the entire planning process and environmental awareness among policy-makers and stakeholders.}, - file = {/Users/fabio/Zotero/storage/SX9QU4WA/Longato et al. - 2021 - NC-ND license Practical applications of ecosystem services in spatial planning Lessons learned from a systematic.pdf} -} - -@article{Loorbach2017, - ids = {loorbach2017}, - title = {Sustainability {{Transitions Research}}: {{Transforming Science}} and {{Practice}} for {{Societal Change}}}, - author = {Loorbach, Derk and Frantzeskaki, Niki and Avelino, Flor}, - year = {2017}, - journal = {Annual Review of Environment and Resources}, - volume = {42}, - number = {1}, - pages = {599--626}, - publisher = {{Annual Reviews Inc.}}, - issn = {1543-5938}, - doi = {10.1146/annurev-environ-102014-021340}, - abstract = {This paper describes the field of sustainability transitions research in the context of a growing interest in science and society in large scale societal transformation towards sustainability that emerged around the year 2000. We describe how different types of scientific approaches and methodological positions explore different types of transitions and provide the basis for different theories and models for governance of sustainability transitions. The field as a whole is very heterogeneous but can be characterized in that it centers around notions such as path-dependency, incumbent regimes, transformative niches and experimental governance. The field has by now produced a broad theoretical and empirical basis along with a variety of social transformation strategies and instruments, impacting disciplinary scientific fields as well as (policy) practice. In this paper we mainly focus on its relevance to real world sustainability problems and the more applied and transdisciplinary research. Expected final online publication date for the Annual Review of Environment and Resources Volume 41 is October 17, 2016. Please see http://www.annualreviews.org/catalog/pubdates.aspx for revised estimates.}, - isbn = {0108160602}, - keywords = {sustainability transitions research,Sustainability transitions research,transdisciplinarity,Transdisciplinarity,transition governance,Transition governance}, - file = {/Users/fabio/Zotero/storage/8NI76DM6/full-text.pdf;/Users/fabio/Zotero/storage/GUX4445Z/Sustainability Transitions Research Transforming Science and Practice for Societal Change.pdf} -} - -@article{loorbachTransitionManagementSustainable2010, - title = {Transition Management for Sustainable Development: {{A}} Prescriptive, Complexity-Based Governance Framework}, - author = {Loorbach, Derk}, - year = {2010}, - month = jan, - journal = {Governance}, - volume = {23}, - number = {1}, - pages = {161--183}, - issn = {09521895}, - doi = {10.1111/J.1468-0491.2009.01471.X}, - urldate = {2022-03-13}, - abstract = {This article introduces transition management as a new governance approach for sustainable development. Sustainable development is used here as a common notion referring to those persistent problems in (Western industrialized) societies that can only be dealt with on the very long term (decades or more) through specific types of network and decision-making processes. Based on interdisciplinary research into complex processes of long term, structural change in society, basic tenets for complexity-based governance are formulated. These tenets are translated into a framework that distinguishes between four different types of governance activities and their respective roles in societal transitions. This framework can be used for implementation of governance strategies and instruments. The approach and framework have been developed deductively and inductively in the Netherlands since 2000. This article presents the theoretical basis of transition management and will be illustrated by examples from transition management practice, especially the Dutch national energy transition program. \textcopyright{} 2010 Wiley Periodicals, Inc.} -} - -@article{LopesdeSousaJabbour2019, - title = {Circular Economy Business Models and Operations Management}, - author = {{Lopes de Sousa Jabbour}, Ana Beatriz and Rojas Luiz, Joao Victor and Rojas Luiz, Octaviano and Jabbour, Charbel Jose Chiappetta and Ndubisi, Nelson Oly and {Caldeira de Oliveira}, Jorge Henrique and Junior, Flavio Horneaux}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {1525--1539}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.349}, - urldate = {2020-03-22}, - abstract = {This article examines and conceptualizes the implications of the adoption of circular economy (CE) business models on operations management (OM) decision-making processes, in the areas of product design, production planning and control, and logistics/supply chains. A systematic literature review was conducted in order to identify and examine the following key areas: (1) the new demands faced by OM decision-making regarding changes in capability, work procedures, intra- and inter-organizational relationships and technologies; (2) the specific changes OM decision-making must make in order to support CE business models (based on the ReSOLVE framework); and (3) guidelines which will help designers and operations and logistics/supply chain managers develop the necessary skills to meet society and the global market's emerging demands. The findings of this research will allow operations managers to foresee the unfolding needs for capacity building in CE, and scholars can build on the results of this article to develop new research themes. Furthermore, this is the first article to describe the ways in which OM knowledge can support the transition towards the circular economy based on the perspective of dynamic capabilities.}, - keywords = {Circular economy,Logistics,Product design,Production planning,Sustainable operations,Sustainable supply chains} -} - -@article{lopesRoleOpenInnovation2021, - title = {The {{Role}} of {{Open Innovation}}, and the {{Performance}} of {{European Union Regions}}}, - author = {Lopes, Jo{\~a}o M. and Gomes, Sofia and Oliveira, Jos{\'e} and Oliveira, M{\'a}rcio}, - year = {2021}, - month = apr, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {7}, - number = {2}, - pages = {120}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2199-8531}, - doi = {10.3390/joitmc7020120}, - urldate = {2021-04-29}, - abstract = {{$<$}p{$>$}This research aims to detect the factors that best explain the performance of regional innovation in the European Union (EU), in the year 2019, and compare the obtained results with the factors used to elucidate the performance of regional innovation in the EU during the year 2016. This comparison allowed us to identify the variations that have occurred during these 3 years. The methodology used is quantitative and served to identify the factors that clarify the performance of regional innovation in the EU in 2019. The data collected was treated in the econometric software Eviews10. Estimations used a multiple linear regression method. The attained results show that with the implementation of the Research and Innovation Strategy for Smart Specialization (RIS3), the Leader and Strong Regions benefited from its implementation. On the other hand, Moderate and Modest Regions failed to improve their innovative performance with the implementation of RIS3. On the practical contributions, it provides suggestions to the actors of the triple helix (Academy\textendash Government\textendash Industry) to improve the performance of innovation. Furthermore, it contributes to the theory by updating the knowledge of the existing literature with new dimensions from the 2019 RIS database. This research is original as it allows to appraise the evolution of the open innovative performance of the regions, by using comparative data from 2019 and 2016.{$<$}/p{$>$}}, - keywords = {innovation,open innovation,regional development,Regional Innovation Scoreboard,regions,RIS3,smart specialization}, - file = {/Users/fabio/Zotero/storage/E5JAQENN/full-text.pdf} -} - -@article{LopesSantos2019, - title = {Eco-Innovation and Business Performance in Emerging and Developed Economies}, - author = {Lopes Santos, David Ferreira and Valente Rezende, Mait{\^e} Dubugras and Cruz Basso, Leonardo Fernando}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117674}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117674}, - urldate = {2020-05-21}, - abstract = {This study initially explored 323 sustainability reports certified by the Global Reporting Initiative. The aim was to evaluate, at the company level, the structure of eco-innovation of firms established in developed and emerging countries and the influence of eco-innovation on the financial performance of those companies during the 2012\textendash 2014 period. A sample of 231 companies was collected, 58 from emerging countries and 173 from developed countries. The methodology was based on structural equation modeling and regression with panel data. The study revealed that nearly all environmental and social eco-innovation variables were significant in their respective dimensions in the developed countries, whereas in the emerging countries, only two environmental and social variables were significant, thus highlighting the more advanced stage of eco-innovation in developed countries. The results of the regression with panel data indicated that the environmental and social variables were significant only for return on sales (ROS) and differed between companies located in emerging and developed countries.}, - keywords = {Business results,Environmental impact,Innovation capacity,Sustainable innovation} -} - -@article{Lopez2011, - title = {Recycling {{Ability}} of {{Biodegradable Matrices}} and {{Their Cellulose-Reinforced Composites}} in a {{Plastic Recycling Stream}}}, - author = {Lopez, J. P. and Girones, J. and a. Mendez, J. and Puig, J. and a. Pelach, M.}, - year = {2011}, - month = jul, - journal = {Journal of Polymers and the Environment}, - volume = {20}, - number = {1}, - pages = {96--103}, - issn = {1566-2543}, - doi = {10.1007/s10924-011-0333-1}, - urldate = {2014-07-23}, - keywords = {\'a,\'a thermal properties,biodegradable composites \'a bioplastics,recycling \'a mechanical properties}, - file = {/Users/fabio/Zotero/storage/35FZNNEI/Recycling Ability of Biodegradable Matrices and Their Cellulose-Reinforced Composites in a Plastic Recycling Stream.pdf} -} - -@article{Lopez2015, - title = {A Cost-Effective Junior Resident Training and Assessment Simulator for Orthopaedic Surgical Skills via Fundamentals of Orthopaedic Surgery Aaos Exhibit Selection: {{AAOS}} Exhibit Selection}, - author = {Lopez, Gregory and Wright, Rick and Martin, David and Jung, James and Bracey, Daniel and Gupta, Ranjan}, - year = {2015}, - journal = {Journal of Bone and Joint Surgery - American Volume}, - volume = {97}, - number = {8}, - pages = {659--666}, - issn = {15351386}, - doi = {10.2106/JBJS.N.01269}, - abstract = {BACKGROUND: Psychomotor testing has been recently incorporated into residency training programs not only to objectively assess a surgeon's abilities but also to address current patient-safety advocacy and medicolegal trends. The purpose of this study was to develop and test a cost-effective psychomotor training and assessment tool-The Fundamentals of Orthopaedic Surgery (FORS)-for junior-level orthopaedic surgery resident education. METHODS: An orthopaedic skills board was made from supplies purchased at a local hardware store with a total cost of less than \$350 so as to assess six different psychomotor skills. The six skills included fracture reduction, three-dimensional drill accuracy, simulated fluoroscopy-guided drill accuracy, depth-of-plunge minimization, drill-by-feel accuracy, and suture speed and quality. Medical students, residents, and attending physicians from three orthopaedic surgery residency programs accredited by the Accreditation Council for Graduate Medical Education participated in the study. Twenty-five medical students were retained for longitudinal training and testing for four weeks. Each training session involved an initial examination followed by thirty minutes of board training. The time to perform each task was measured with accuracy measurements for the appropriate tasks. Statistical analysis was done with one-way analysis of variance, with significance set at p {$<$} 0.05. RESULTS: Forty-seven medical students, twenty-nine attending physicians, and fifty-eight orthopaedic surgery residents participated in the study. Stratification among medical students, junior residents, and senior residents and/or attending physicians was found in all tasks. The twenty-five medical students who were retained for longitudinal training improved significantly above junior resident level in four of the six tasks. CONCLUSIONS: The FORS is an effective simulator of basic motor skills that translates across a wide variety of operations and has the potential to advance junior-level participants to senior resident skill level. CLINICAL RELEVANCE: The FORS simulator may serve as a valuable tool for resident education.}, - isbn = {0021-9355}, - pmid = {25878310}, - file = {/Users/fabio/Zotero/storage/FD9RSNZH/A Cost-Effective Junior Resident Training and Assessment Simulator for Orthopaedic Surgical Skills via Fundamentals of Orthopaedic Surgery.pdf} -} - -@article{lopezFeasibilityStudyUse2022, - title = {Feasibility Study on the Use of Recycled Materials for Prototyping Purposes: {{A}} Comparative Study Based on the Tensile Strength}, - shorttitle = {Feasibility Study on the Use of Recycled Materials for Prototyping Purposes}, - author = {L{\'o}pez, V{\'i}ctor M and Carou, Diego and Cruz S, Fabio A}, - year = {2022}, - month = jul, - journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, - pages = {09544054221113378}, - publisher = {{IMECHE}}, - issn = {0954-4054}, - doi = {10.1177/09544054221113378}, - urldate = {2022-09-05}, - abstract = {3D printing is considered a disruptive technology and it continues to expand the design space boundaries for prototypes and final products. Sustainability is one of the major objectives for manufacturing, and the use of recycled materials is becoming a relevant sustainability strategy, particularly for improving material resource efficiency. This paper evaluates the suitability of substituting virgin polylactic acid (PLA) for recycled PLA. It describes an experimental plan divided into three phases to evaluate the specimens' tensile strength. The results showed that recycled PLA could be used thanks to a similar tensile strength, even though this is slightly lower than that of the virgin material. In addition, the infill density and the orientation parameters played a major role in the response. As the infill density approaches 100\%, both the maximum load and tensile strength increase sharply. However, when using an infill density of 40\%, on average, the specimen resists 58.07\% of the maximum load. In addition, because of the anisotropy, the horizontal orientation allowed attaining a higher tensile strength while the vertical orientation provided a lower value. These are relevant insights for prescriptions of the 3D-printing parameters guaranteeing minimum tensile strength in prototyping.}, - copyright = {All rights reserved}, - langid = {english}, - keywords = {3D printing,distributed recycling,PLA,prototyping,recycling,tensile strength} -} - -@article{LopezTaborda2021, - title = {Design for Additive Manufacturing: A Comprehensive Review of the Tendencies and Limitations of Methodologies}, - author = {Lopez Taborda, Luis Lisandro and Maury, Heriberto and Pacheco, Jovanny}, - year = {2021}, - month = jun, - journal = {Rapid Prototyping Journal}, - volume = {27}, - number = {5}, - pages = {918--966}, - publisher = {{Emerald Publishing Limited}}, - issn = {13552546}, - doi = {10.1108/RPJ-11-2019-0296}, - urldate = {2021-06-15}, - abstract = {Purpose: There are many investigations in design methodologies, but there are also divergences and convergences as there are so many points of view. This study aims to evaluate to corroborate and deepen other researchers' findings, dissipate divergences and provide directing to future work on the subject from a methodological and convergent perspective. Design/methodology/approach: This study analyzes the previous reviews (about 15 reviews) and based on the consensus and the classifications provided by these authors, a significant sample of research is analyzed in the design for additive manufacturing (DFAM) theme (approximately 80 articles until June of 2017 and approximately 280\textendash 300 articles until February of 2019) through descriptive statistics, to corroborate and deepen the findings of other researchers. Findings: Throughout this work, this paper found statistics indicating that the main areas studied are: multiple objective optimizations, execution of the design, general DFAM and DFAM for functional performance. Among the main conclusions: there is a lack of innovation in the products developed with the methodologies, there is a lack of exhaustivity in the methodologies, there are few efforts to include environmental aspects in the methodologies, many of the methods include economic and cost evaluation, but are not very explicit and broad (sustainability evaluation), it is necessary to consider a greater variety of functions, among other conclusions Originality/value: The novelty in this study is the methodology. It is very objective, comprehensive and quantitative. The starting point is not the case studies nor the qualitative criteria, but the figures and quantities of methodologies. The main contribution of this review article is to guide future work on the subject from a methodological and convergent perspective and this article provides a broad database with articles containing information on many issues to make decisions: design methodology; optimization; processes, selection of parts and materials; cost and product management; mechanical, electrical and thermal properties; health and environmental impact, etc.}, - keywords = {Design for additive manufacturing (DFAM),Design methodology,Product design} -} - -@article{loucaChrisFreemanConcept2021, - title = {Chris {{Freeman}}'s Concept of Evolution\textendash{{A}} Critique of the Misuse of Biological Analogies in Macroeconomics}, - author = {Lou{\c c}{\~a}, Francisco and Cabral, Ricardo}, - year = {2021}, - month = nov, - journal = {Research Policy}, - volume = {50}, - number = {9}, - pages = {104322}, - publisher = {{North-Holland}}, - issn = {0048-7333}, - doi = {10.1016/J.RESPOL.2021.104322}, - urldate = {2021-08-24} -} - -@article{Loukil2020, - title = {Waste Collection Criticality Index in {{African}} Cities}, - author = {Loukil, Faten and Rouached, Lamia}, - year = {2020}, - month = feb, - journal = {Waste Management}, - volume = {103}, - pages = {187--197}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.12.027} -} - -@article{Lous2000, - title = {Fabrication of {{Piezoelectric CeramicPolymer Composite Transducers Using Fused Deposition}} of {{Ceramics}}}, - author = {Lous, Gwenalle M. and Cornejo, Ivn A. and McNulty, Thomas F. and Safari, Ahmad and Danforth, Stephen C}, - year = {2000}, - month = jan, - journal = {Journal of the American Ceramic Society}, - volume = {83}, - number = {1}, - pages = {124--28}, - issn = {00027820}, - doi = {10.1111/j.1151-2916.2000.tb01159.x}, - urldate = {2015-02-06}, - file = {/Users/fabio/Zotero/storage/R53Q6RTG/Lous et al. - 2000 - Fabrication of Piezoelectric CeramicPolymer Composite Transducers Using Fused Deposition of Ceramics.pdf} -} - -@article{loveridgeMeasuringHumanWellbeing2020, - title = {Measuring Human Wellbeing: {{A}} Protocol for Selecting Local Indicators}, - author = {Loveridge, Robin and Sallu, Susannah M and Pesha, Ignatus J and R Marshall, Andrew}, - year = {2020}, - month = dec, - journal = {Environmental Science \& Policy}, - volume = {114}, - pages = {461--469}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2020.09.002}, - urldate = {2020-10-05}, - file = {/Users/fabio/Zotero/storage/KE7PYYVX/full-text.pdf} -} - -@article{Lovo2018, - title = {Optimal Deposition Orientation in Fused Deposition Modeling for Maximizing the Strength of Three-Dimensional Printed Truss-like Structures}, - author = {Lovo, Jo{\~a}o Fiore Parreira and Fortulan, Carlos Alberto and {da Silva}, Ma{\'i}ra Martins}, - year = {2019}, - month = may, - journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, - volume = {233}, - number = {4}, - pages = {1206--1215}, - publisher = {{SAGE PublicationsSage UK: London, England}}, - issn = {20412975}, - doi = {10.1177/0954405418774603}, - urldate = {2021-08-31}, - abstract = {Whether for producing prototypes or functional parts by additive manufacturing, the fused deposition modeling is the most commonly used technique. Nevertheless, not only the hobbyist but also the industrial three-dimensional printers produce parts that suffer from anisotropy in their mechanical properties imposing important limitations on the strength of the manufactured piece. The aim of this work is to propose a strategy for determining the optimal build surface orientation of three-dimensional truss-like structures manufactured using fused deposition modeling. This can be achieved by minimizing the norm of the dot products of the normal direction of the deposition plane (build surface plane) and the directions of the tensile forces. Since three-dimensional trusses are subjected to tensile forces in different directions, a multi-objective cost function was proposed. Moreover, these structures might present rotational symmetry, which should be considered as design constraints. In this work, two three-dimensional truss-like structures were investigated. The nature of the optimization is case dependent and solvers were selected accordingly. Experimental campaigns were carried out for evaluating the specimens manufactured using fused deposition modeling. It could be concluded that higher yield tensile strength could be achieved by adopting the optimal deposition plane. This result demonstrates the applicability of optimization techniques for improving additive manufacturing results.}, - keywords = {additive manufacturing,Fused deposition modeling,optimization,three-dimensional printing,truss-like structures} -} - -@article{Low2017, - title = {Perspective on {{3D}} Printing of Separation Membranes and Comparison to Related Unconventional Fabrication Techniques}, - author = {Low, Ze-Xian and Chua, Yen Thien and Ray, Brian Michael and Mattia, Davide and Metcalfe, Ian Saxley and Patterson, Darrell Alec}, - year = {2017}, - month = feb, - journal = {Journal of Membrane Science}, - volume = {523}, - number = {October 2016}, - pages = {596--613}, - publisher = {{Elsevier}}, - issn = {03767388}, - doi = {10.1016/j.memsci.2016.10.006}, - abstract = {Additive manufacturing, likewise known as 3-dimensional (3D) printing and rapid prototyping, has the ability to create almost any geometrically complex shape or feature in a range of materials across different scales. It has found its applications in various areas, such as medicine (bioprinting), art, manufacturing and engineering. On the other hand, its use in separation membrane engineering is relatively new. The use of additive manufacturing techniques could provide more control towards the design of separation membrane systems and offers novel membrane preparation techniques that are able to produce membranes of different shapes, types and designs which cannot be made using conventional techniques such as phase inversion or sintering. Here we provide key background information on 3D printing technologies and applications in membrane engineering; a discussion of the potential and limitations of current 3D printing technologies for membrane engineering and future aspects of the technology. Due to the potential benefits of 3D printing in membrane manufacturing, in particular the unprecedented control over membrane architecture the technique could allow, the use of 3D printing in membrane systems should see significant growth in the near future.}, - keywords = {3D printing,Additive manufacturing,Membrane,Rapid prototyping,Separation,Subtractive manufacturing}, - file = {/Users/fabio/Zotero/storage/CH5IAVAK/Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques.pdf} -} - -@article{loweWhatTheoriesValue2022, - title = {What Theories of Value (Could) Underpin Our Circular Futures?}, - author = {Lowe, Benjamin H. and Genovese, Andrea}, - year = {2022}, - month = may, - journal = {Ecological Economics}, - volume = {195}, - pages = {107382}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2022.107382}, - urldate = {2022-03-14} -} - -@article{Lowrie, - title = {Accounting for {{Ecosystem Services}} in {{Life Cycle Assessment}}, {{Part II}}: {{Toward}} an {{Ecologically Based LCA}}}, - author = {Zhang, Yi and Baral, Anil and Bakshi, Bhavik R.}, - year = {2010}, - month = apr, - journal = {Environmental Science \& Technology}, - volume = {44}, - number = {7}, - pages = {2624--2631}, - issn = {0013-936X}, - doi = {10.1021/es900548a}, - urldate = {2021-09-20}, - file = {/Users/fabio/Zotero/storage/HE9NP323/full-text.pdf} -} - -@article{Lowrie2010, - title = {Accounting for {{Ecosystem Services}} in {{Life Cycle Assessment}}, {{Part I}}: {{A Critical Review}}}, - author = {Zhang, Yi and Singh, Shweta and Bakshi, Bhavik R.}, - year = {2010}, - month = apr, - journal = {Environmental Science \& Technology}, - volume = {44}, - number = {7}, - pages = {2232--2242}, - publisher = {{American Chemical Society}}, - issn = {0013-936X}, - doi = {10.1021/es9021156}, - urldate = {2021-09-20}, - file = {/Users/fabio/Zotero/storage/HCSYGKDV/Lowrie - Unknown - Accounting for Ecosystem Services in Life Cycle Assessment, Part I A Critical Review.pdf} -} - -@misc{LowtechSolutionsCOVID19, - title = {Low-Tech Solutions for the {{COVID-19}} Supply Chain Crisis | {{Nature Reviews Materials}}}, - urldate = {2023-01-31}, - howpublished = {https://www-nature-com.bases-doc.univ-lorraine.fr/articles/s41578-020-0205-1}, - file = {/Users/fabio/Zotero/storage/LNMKEXMC/s41578-020-0205-1.html} -} - -@article{Lu2015, - title = {Development Trends in Additive Manufacturing and {{3D}} Printing}, - author = {Lu, Bingheng and Li, Dichen and Tian, Xiaoyong}, - year = {2015}, - journal = {Engineering}, - volume = {1}, - number = {1}, - pages = {85--89}, - publisher = {{THE AUTHORS}}, - issn = {2095-8099}, - doi = {10.15302/J-ENG-2015012}, - abstract = {Additive manufacturing and 3D printing tech- nology have been developing rapidly in the last 30 years, and indicate great potential for future development. The promising future of this technology makes its impact on traditional industry unpredictable. 3D printing will propel the revolution of fabrication modes forward, and bring in a new era for customized fabrication by realizing the fi ve ``any''s: use of almost any material to fabricate any part, in any quantity and any location, for any industrial field. Innovations in material, design, and fabrication processes will be inspired by the merging of 3D-printing technology and processes with traditional manufacturing processes. Finally, 3D printing will become as valuable for manufacturing industries as equivalent and subtractive manufacturing processes.}, - keywords = {3D printing,additive manufacturing,customized fabrication,fabrication modes,innovative design}, - file = {/Users/fabio/Zotero/storage/MGTBARS6/Development Trends in Additive Manufacturing and 3D Printing.pdf} -} - -@article{Lu2017, - title = {Ecosystem Services}, - author = {L{\"u}, Yihe and Wang, Shuai}, - year = {2017}, - journal = {Springer Geography}, - volume = {29}, - number = {February}, - pages = {419--433}, - issn = {21943168}, - doi = {10.1007/978-981-10-1884-8_19}, - abstract = {Ecosystem services, the benefits people obtain from ecosystems, can be comprehended and implemented as integrative indicators in human-environment systems. Researches on ecosystem services have gained an enormous and rising attractiveness for scientists, managers and policy makers since the late 1990s. Chinese scientists caught the international trend on this line of researches and made more and more significant contributions in the last 15~years. This chapter elaborated the development, characteristics, and future potentials of ecosystem service research in China with an international perspective supported by bibliometric analysis, which can be helpful for facilitating the understanding and collaborations for relevant stakeholders.}, - keywords = {Ecological indicator,Ecological processes,Ecosystem services,Human-environment systems,Landscape pattern}, - file = {/Users/fabio/Zotero/storage/8TIRH8WK/Contents_2018_Ecosystem-Services.pdf} -} - -@article{luanDynamicMaterialFlow2021, - title = {Dynamic Material Flow Analysis of Plastics in {{China}} from 1950 to 2050}, - author = {Luan, Xiaoyu and Cui, Xiaowei and Zhang, Long and Chen, Xinyi and Li, Xinxin and Feng, Xiuwei and Chen, Lu and Liu, Wei and Cui, Zhaojie}, - year = {2021}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {327}, - pages = {129492}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129492}, - urldate = {2021-11-07} -} - -@article{luanEstimationPredictionPlastic2022, - title = {Estimation and Prediction of Plastic Losses to the Environment in {{China}} from 1950 to 2050}, - author = {Luan, Xiaoyu and Kou, Xiaohui and Zhang, Long and Chen, Lu and Liu, Wei and Cui, Zhaojie}, - year = {2022}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {184}, - pages = {106386}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106386}, - urldate = {2022-05-29} -} - -@article{luanGreenhouseGasEmissions2023, - title = {Greenhouse Gas Emissions Associated with Plastics in {{China}} from 1950 to 2060}, - author = {Luan, Xiaoyu and Kou, Xiaohui and Cui, Xiaowei and Chen, Lu and Xue, Wenxiu and Liu, Wei and Cui, Zhaojie}, - year = {2023}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {197}, - pages = {107089}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107089}, - urldate = {2023-07-06}, - abstract = {The unprecedented rise of plastics has caused substantial greenhouse gas (GHG) emissions. In this study, material flow analysis and GHG accounting models were integrated to estimate the GHG emissions of plastics in China from 1950 to 2020, and the dynamic evolution from 2021 to 2060 was tracked. The cumulative GHG emissions were 5544.0 Mt CO2eq from 1950 to 2020, and 496.8 Mt CO2eq of GHG were emitted in 2020. Monomer production stage had the highest GHG emissions (58.6\%) and electricity consumption was the major emission source (69.0\%). GHG emissions of baseline and comprehensive scenarios would reach a peak in 2040 and 2030, respectively. Neutral scenario was the only scenario that achieved carbon neutrality by 2060. GHG emission reduction requires reducing plastic demand, improving waste recycling, and adopting bio-based plastics and renewable energy. This study scientifically explored the path of carbon peak and carbon neutrality to combat climate change.}, - langid = {english}, - keywords = {Carbon neutrality,Carbon peak,China,Greenhouse gas emissions,Material flow analysis,Plastics}, - file = {/Users/fabio/Zotero/storage/KHHFP9L3/S0921344923002252.html} -} - -@article{Lucassen2014, - title = {A {{Living Lab Framework}} : Facilitating the Adoption of Innovations in International Information Infrastructures}, - author = {Lucassen, Inge and Klievink, Bram and Tavasszy, Lori}, - year = {2014}, - keywords = {information infrastructures,innovation,international trade,living labs,supply chains} -} - -@article{Luckachan2011, - title = {Biodegradable {{Polymers- A Review}} on {{Recent Trends}} and {{Emerging Perspectives}}}, - author = {Luckachan, Gisha E. and Pillai, C. K. S.}, - year = {2011}, - month = jun, - journal = {Journal of Polymers and the Environment}, - volume = {19}, - number = {3}, - pages = {637--676}, - issn = {1566-2543}, - doi = {10.1007/s10924-011-0317-1}, - urldate = {2014-07-15}, - keywords = {\'a future perspectives \'a,aspects \'a recent trends,biodegradable polymers \'a environmental,introduction,lactic acid,polyethylene \'a poly,the relevance of biodegradable}, - file = {/Users/fabio/Zotero/storage/MU35SJC6/Luckachan, Pillai - 2011 - Biodegradable Polymers- A Review on Recent Trends and Emerging Perspectives.pdf} -} - -@article{luComputerVisionSolid2022, - title = {Computer Vision for Solid Waste Sorting: {{A}} Critical Review of Academic Research}, - author = {Lu, Weisheng and Chen, Junjie}, - year = {2022}, - month = apr, - journal = {Waste Management}, - volume = {142}, - pages = {29--43}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.02.009}, - urldate = {2022-03-07}, - abstract = {Waste sorting is highly recommended for municipal solid waste (MSW) management. Increasingly, computer vision (CV), robotics, and other smart technologies are used for MSW sorting. Particularly, the field of CV-enabled waste sorting is experiencing an unprecedented explosion of academic research. However, little attention has been paid to understanding its evolvement path, status quo, and prospects and challenges ahead. To address the knowledge gap, this paper provides a critical review of academic research that focuses on CV-enabled MSW sorting. Prevalent CV algorithms, in particular their technical rationales and prediction performance, are introduced and compared. The distribution of academic research outputs is also examined from the aspects of waste sources, task objectives, application domains, and dataset accessibility. The review discovers a trend of shifting from traditional machine learning to deep learning algorithms. The robustness of CV for waste sorting is increasingly enhanced owing to the improved computation powers and algorithms. Academic studies were unevenly distributed in different sectors such as household, commerce and institution, and construction. Too often, researchers reported some preliminary studies using simplified environments and artificially collected data. Future research efforts are encouraged to consider the complexities of real-world scenarios and implement CV in industrial waste sorting practice. This paper also calls for open sharing of waste image datasets for interested researchers to train and evaluate their CV algorithms.}, - keywords = {Computer vision,Deep learning,Image recognition,Machine learning,Municipal solid waste,Waste sorting} -} - -@inproceedings{Ludwig2019, - title = {"{{The Printer}} Is {{Telling Me}} about {{Itself}}"}, - booktitle = {Proceedings of the 2019 on {{Designing Interactive Systems Conference}}}, - author = {Ludwig, Thomas and D{\"o}ll, Michael and Kotthaus, Christoph}, - year = {2019}, - month = jun, - pages = {331--344}, - publisher = {{ACM}}, - address = {{New York, NY, USA}}, - doi = {10.1145/3322276.3322342}, - isbn = {978-1-4503-5850-7} -} - -@article{luederitzReviewUrbanEcosystem2015, - ids = {luederitz2015}, - title = {A Review of Urban Ecosystem Services: {{Six}} Key Challenges for Future Research}, - author = {Luederitz, Christopher and Brink, Ebba and Gralla, Fabienne and Hermelingmeier, Verena and Meyer, Moritz and Niven, Lisa and Panzer, Lars and Partelow, Stefan and Rau, Anna Lena and Sasaki, Ryuei and Abson, David J. and Lang, Daniel J. and Wamsler, Christine and {von Wehrden}, Henrik}, - year = {2015}, - month = aug, - journal = {Ecosystem Services}, - volume = {14}, - pages = {98--112}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2015.05.001}, - urldate = {2021-04-23}, - abstract = {Global urbanization creates opportunities and challenges for human well-being and transition towards sustainability. Urban areas are human-environment systems that depend fundamentally on ecosystems, and thus require an understanding of the management of urban ecosystem services to ensure sustainable urban planning. The purpose of this study is to provide a systematic review of urban ecosystems services research, which addresses the combined domain of ecosystem services and urban development. We examined emerging trends and gaps in how urban ecosystem services are conceptualized in peer-reviewed case study literature, including the geographical distribution of research, the development and use of the urban ecosystem services concept, and the involvement of stakeholders. We highlight six challenges aimed at strengthening the concept's potential to facilitate meaningful inter- and transdisciplinary work for ecosystem services research and planning. Achieving a cohesive conceptual approach in the research field will address (i) the need for more extensive spatial and contextual coverage, (ii) continual clarification of definitions, (iii) recognition of limited data transferability, (iv) more comprehensive stakeholder involvement, (v) more integrated research efforts, and (vi) translation of scientific findings into actionable knowledge, feeding information back into planning and management. We conclude with recommendations for conducting further research while incorporating these challenges.}, - keywords = {Cities,Ecosystem service cascade model,Operationalization,Peri-urban,Social-ecological systems,Structure-function-benefit}, - file = {/Users/fabio/Zotero/storage/S74TC5QJ/full-text.pdf} -} - -@article{luisPsychosocialEconomicImpacts2020, - title = {Psychosocial and Economic Impacts of a Charge in Lightweight Plastic Carrier Bags in {{Portugal}}: {{Keep}} Calm and Carry On?}, - author = {Lu{\'i}s, S{\'i}lvia and {Roseta-Palma}, Catarina and Matos, Marta and Lima, Maria Lu{\'i}sa and Sousa, C{\'a}tia}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104962}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104962}, - urldate = {2020-06-18}, - abstract = {Reducing plastic waste has become an urgent global challenge. To help fight this problem, European countries have undertaken the mission to reduce lightweight plastic bag consumption. In 2014, Portugal implemented a charge on lightweight plastic bags, calling for an adjustment from both consumers and firms. The present research aims to study the psychosocial and economic impacts of this tax measure, namely in terms of acceptability of the measure, potential attitude and behaviour changes, and impact on plastic bag markets. The psychosocial impacts were studied based on an online survey (N = 198) and on available datasets illustrating societal trends. Survey results showed that participants agreed with the charge and with widening it to all types of plastic bags. They attributed environmental motives to its implementation, developed reuse habits and mentioned a decreased consumption of disposable plastics. In addition, individuals appear more concerned with the impacts of everyday plastic products in the environment, and more willing to pay higher taxes and prices to protect the environment. The economic impacts were studied using available data on the charge revenue and on the production and sales of plastic bags, among others. We illustrate that the implementation of the charge led to a sharp fall in the use of lightweight bags, generating a decrease in the production and sale of plastic bags overall, while avoiding significant impacts on the relevant economic sectors.}, - keywords = {charge,economic impacts,lightweight plastic bag,psychosocial impacts} -} - -@article{lukoschekIntegratingHomeWork2021, - title = {Integrating {{Home}} and {{Work}}: {{How}} the {{Work Environment Enhances Household-Sector Innovations}}}, - author = {Lukoschek, Carmen Sabrina and {Stock-Homburg}, Ruth Maria}, - year = {2021}, - month = jan, - journal = {Research Policy}, - volume = {50}, - number = {1}, - pages = {104139}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104139}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/SUPWXARP/full-text.pdf} -} - -@article{lundgrenUnityDisunityStrengths2022, - title = {Unity through Disunity: {{Strengths}}, Values, and Tensions in the Disciplinary Discourse of Ecological Economics}, - author = {Lundgren, Jakob}, - year = {2022}, - month = jan, - journal = {Ecological Economics}, - volume = {191}, - pages = {107241}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107241}, - urldate = {2021-09-27} -} - -@article{lundyIntegratingSciencesSustain, - title = {Integrating {{Sciences}} to {{Sustain Urban Ecosystem Services}}}, - author = {Lundy, L and Wade, R}, - urldate = {2021-12-13}, - abstract = {Effective water management within urban settings requires robust multidisciplinary understanding and an appreciation of the value added to urban spaces by providing multi-functional green-blue spaces. Multi-functional landscapes where ecosystem service provisions are 'designed-in' can help 'transition' cities to more sustainable environments which are more resilient to changing future conditions. With benefits ranging from the supply of water, habitat and energy to pollutant removal, amenity and opportunities for recreation, urban water bodies can provide a focal point for reconnecting humans and nature in otherwise densely built-up areas. Managing water within urban spaces is an essential infrastructure requirement but has historically been undertaken in isolation from other urban functions and spatial requirements. Increasingly, because of the limits of space and need to respond to new drivers (e.g. mitigation of diffuse pollution), more sustainable approaches to urban water management are being applied which can have multiple functions and benefits. This paper presents a review of ecosystem services associated with water, particularly those in urban environments and uses the emerging language of ecosystem services to provide a framework for discussion. The range of supporting, provisioning, regulating and cultural ecosystem services associated with differing types of urban water bodies are identified. The developed matrix is then used to evaluate the results of a series of social, ecological and physical science studies co-located on a single stretch of a restored urban river.}, - keywords = {Multi-functional landscapes,Urban ecosystem services,Water}, - file = {/Users/fabio/Zotero/storage/F6AMYBJX/full-text.pdf} -} - -@inproceedings{Luo1999, - title = {Environmental Performance Analysis of Solid Freedom Fabrication Processes}, - booktitle = {Proceedings of the 1999 {{IEEE International Symposium}} on {{Electronics}} and the {{Environment}} ({{Cat}}. {{No}}.{{99CH36357}})}, - author = {{Yanchun Luo} and {Zhiming Ji} and Leu, M.C. and Caudill, Reggie}, - year = {1999}, - number = {February}, - pages = {1--6}, - publisher = {{IEEE}}, - doi = {10.1109/ISEE.1999.765837}, - abstract = {Title=Environmental performance analysis of solid freedom fabrication processes, author=Luo, Y. and Ji, Z. and Leu, M.C. and Caudill, R., booktitle=Electronics and the Environment, 1999. ISEE-1999. Proceedings of the 1999 IEEE International Symposium on, pages=1-6, isbn=0780354958, year=2002, organization=IEEE}, - isbn = {0-7803-5495-8}, - file = {/Users/fabio/Zotero/storage/4ZPA8AP8/Luo et al. - 1999 - Environmental Performance Analysis of Solid Freeform Fabrication Processes.pdf} -} - -@article{Luo2019, - title = {Towards the Sustainable Development of Waste Household Appliance Recovery Systems in {{China}}: An Agent-Based Modeling Approach}, - author = {Luo, Minxin and Song, Xiaoxu and Hu, Shanying and Chen, Dingjiang}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {431--444}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.128}, - file = {/Users/fabio/Zotero/storage/CD4JJZMT/Towards the sustainable development of waste household appliance recovery systems in China- an agent-based modeling approach.pdf} -} - -@article{Luo2019a, - title = {Chemomechanics of Dual-Stage Reprocessable Thermosets}, - author = {Luo, Chaoqian and Zhang, Biao and Zhang, Wang and Yuan, Chao and Dunn, Martin and Ge, Qi and Yu, Kai}, - year = {2019}, - journal = {Journal of the Mechanics and Physics of Solids}, - volume = {126}, - pages = {168--186}, - issn = {00225096}, - doi = {10.1016/j.jmps.2019.02.013}, - abstract = {The recently developed dual-stage 3D printing reprocessable thermosets (3DPRTs) utilize acrylate functional groups to enable the ultra-violet based 3D printing (Stage I), and employ bond exchange reaction (BERs) to tailor the network structure for mechanical properties enhancement and impart the reshapeability, reparability, and recyclability into traditionally unprocessable thermosets (Stage II). 3DPRT provides a practical solution to address environmental challenges associated with the rapid increase in the consumption of 3D printing materials. However, due to the nascent state of development, fundamental understanding of the chemomechanics during the processing of 3DPRTs is still lacking. In this paper, we present detailed experimental and theoretical studies to understand the effect of thermal treatment condition at Stage II on the evolution of network structure and thermomechanical properties of 3DPRTs. A chemomechanics theory is defined to link the molecular-level BER kinetics to the macroscale thermomechanical properties of 3DPRTs during the thermal treatment. A thermo-viscoelastic multi-branched constitutive model is then established to capture the elastic and glass transition behaviors during the Stage II processing. The developed theory is able to capture the experimental observations on the mechanical properties enhancement and provide theoretical guidance for the network design and the selection of thermal treatment conditions to tailor the final mechanical properties of 3DPRTs.}, - keywords = {3D printing,Bond exchange reaction,Chemomechanics modeling,Dual-stage polymerization,Reprocessable thermoset}, - file = {/Users/fabio/Zotero/storage/W66ACI8W/Chemomechanics of dual-stage reprocessable thermosets.pdf} -} - -@article{Luo2020, - title = {Upper Bound of Feed Rates in Thermoplastic Material Extrusion Additive Manufacturing}, - author = {Luo, Cheng and Wang, Xiang and Migler, Kalman B. and Seppala, Jonathan E.}, - year = {2020}, - month = mar, - journal = {Additive Manufacturing}, - volume = {32}, - pages = {101019}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.101019} -} - -@article{luoEffectsFeedRates2020, - title = {Effects of Feed Rates on Temperature Profiles and Feed Forces in Material Extrusion Additive Manufacturing}, - author = {Luo, Cheng and Wang, Xiang and Migler, Kalman B. and Seppala, Jonathan E.}, - year = {2020}, - month = may, - journal = {Additive Manufacturing}, - volume = {35}, - pages = {101361}, - publisher = {{Elsevier BV}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101361}, - urldate = {2020-06-22} -} - -@article{luthraIndustryCleanerProduction2021, - title = {Industry 4.0, {{Cleaner Production}}, and {{Circular Economy}}: {{An}} Important Agenda for Improved {{Ethical Business Development}}}, - author = {Luthra, Sunil and Mangla, Sachin K. and {Lopes de Sousa Jabbour}, Ana Beatriz and Huisingh, Donald}, - year = {2021}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {326}, - pages = {129370}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129370}, - urldate = {2021-11-07}, - abstract = {Little research has been published on emotional responses evoked by completely new, innovative food products. The objectives of the present study were 1) to assess the emotional response to new products (fruit and vegetable smoothies in a drink pouch) in two different scenarios: looking at the smoothie pouch, or tasting the smoothie with the smoothie pouch alongside; 2) to compare the information obtained when the participants use photographs or use words to express emotions. In the Pack-alone scenario, similar emotional spaces and sample configurations were obtained with both images and words. In the Pack-and-tasting scenario, the richness of the emotional response increased when using images. In both scenarios, the participants used a greater number of negative emotions when these were presented as images rather than as words. This could be considered an advantage, as it enables some negative emotional loads to be portrayed. The present results also demonstrate that evaluating the emotional response allows effective discrimination between samples with similar overall liking scores.} -} - -@article{luxGreenBusinessGrowth2023, - title = {Green Business: {{Growth}} or Degrowth to Meet {{IPCC}} Targets? {{Discussion}} of an Assessment Tool: {{IPCC CAPRO}} Change Target}, - shorttitle = {Green Business}, - author = {Lux, Gulliver and Fromont, Emmanuelle and Vo, Thi Le Hoa}, - year = {2023}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {420}, - pages = {138364}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.138364}, - urldate = {2023-08-31}, - abstract = {This article questions the prospects for growth or degrowth of companies as a means of preserving the Earth's ecosystem. More specifically, we propose using a carbon productivity indicator in association with the IPCC Carbon Productivity Target (based on UNFCCC work) to assess the genuine ecological impact of corporate economic activity. This indicator was applied to data from 2015 to 2019 for a sample of companies in the SFB 120 index, and results from their classification are compared to the results obtained with indicators that do not take into account the IPCC targets based on UNFCCC work (Scopes). We highlight how a company's economic growth plays a key role in the fight against global warming. We found that a significant share of the companies that usually qualified as green using the Scope 1 and 2 emissions are, in fact, not green (63\% and 43\% of polluting and low-polluting companies, respectively). We underscore the fact that while green growth still seems possible, the same is true of green degrowth. More specifically, our results advocate for either controlled growth or for slight degrowth in business activity. Lastly, our results open a discussion on degrowth by highlighting how companies in this situation are over-represented among those that meet IPCC objectives.}, - keywords = {Carbon productivity,Degrowth,GHG emissions,Green growth,IPCC,UNFCCC}, - file = {/Users/fabio/Zotero/storage/IGXYI5M7/Lux et al_2023_Green business.pdf;/Users/fabio/Zotero/storage/N4YPZ7PT/S0959652623025222.html} -} - -@article{Luzuriaga2006, - title = {Degradation of Pre-Aged Polymers Exposed to Simulated Recycling: {{Properties}} and Thermal Stability}, - author = {Luzuriaga, Sharbel and Kov{\'a}{\v r}ov{\'a}, Jana and Forteln{\'y}, Ivan}, - year = {2006}, - month = jun, - journal = {Polymer Degradation and Stability}, - volume = {91}, - number = {6}, - pages = {1226--1232}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2005.09.004}, - abstract = {Accelerated thermal and photo-aging of four homopolymers, low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP) and high-impact polystyrene (HIPS), was performed and the impact of subsequent reprocessing conditions on their properties studied. Polymer samples oven-aged at 100 ??C for varying periods of time or UV irradiated in a Weather-o-meter (WOM) at ?? = 340 nm were reprocessed in a Brabender plasticorder at 190 ??C/60 rpm for 10 min. Chemical changes and the evolution of rheological and mechanical properties accompanying the gradual degradation of the individual polymers were monitored and evaluated (DSC, FTIR, colorimetric method, MFI, tensile impact strength). LDPE and HIPS were found to be more susceptible to thermo-oxidation than HDPE and PP, whereas HDPE and PP were affected to a greater extent by UV exposure; the crucial role here is being played by the stabilization of the studied resins. In HDPE the scission and crosslinking reactions competed both in thermo-and photo-degradation. In the case of LDPE, scission prevailed over branching during thermo-oxidation, whereas photo-oxidation of the same sample led predominantly to crosslinking. Abrupt deterioration of the LDPE rheological properties after one week of thermal exposure was suppressed by re-stabilization. The scission reaction was also predominant for PP during thermo-oxidation, and it took place even faster during UV exposure. In the case of HIPS a slight photo-degradation of PS matrix is accompanied by simultaneous crosslinking of the polybutadiene component. ?? 2005 Elsevier Ltd. All rights reserved.}, - isbn = {0141-3910}, - keywords = {Accelerated weathering,Polyolefins,Re-stabilization,Reprocessing,Simulated recycling,Styrenics}, - file = {/Users/fabio/Zotero/storage/WBYUTAGV/Degradation of pre-aged polymers exposed to simulated recycling- Properties and thermal stability.pdf} -} - -@article{Lybaek2020, - ids = {Lybaek2020a}, - title = {Enhancing Policies for Deployment of {{Industrial}} Symbiosis \textendash{} {{What}} Are the Obstacles, Drivers and Future Way Forward?}, - author = {Lybaek, Rikke and Christensen, Thomas Budde and Thomsen, Tobias Pape}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124351}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124351}, - urldate = {2020-10-19}, - abstract = {This paper contains an analysis of Industrial symbiosis policies to explore how development Industrial symbiosis systems is influenced by policies and to examine how future policy frameworks can designed to best support the development of Industrial symbiosis systems. Industrial symbiosis is in the paper defined as the connection of traditionally separate industries in a collective effort to simultaneously increase competitive advantage and reduce environmental impacts by means of byproduct exchange and shared infrastructure. The paper is based on three components: First, the paper reviews, journal articles to provide a policy landscape overview of how such Industrial symbiosis systems are supported by policies and in which areas new policy needs can be identified. Secondly, the paper reviews and discusses policies and framework conditions, provided by the European Union (EU), the United Nations (UN) and the Organization for Economic Cooperation and Development (OECD) designed to support the development of Industrial symbiosis systems The analysis distinguishes between direct and indirect policies in order to emphasize that the development of Industrial symbiosis systems is influenced not only by policies directly targeting industrial symbiosis but also by general framework conditions that may not have been designed with Industrials symbiosis in mind. To improve the understanding of such in direct policies the paper thirdly includes a case study from Denmark, Maabjerg Energy Center (MEC). This case provides new insights into the application of Industrial symbiosis concepts, especially with regards to how framework conditions and indirect policies can influence and shape the development of industrial symbiosis systems. Based on these three components, this paper analyses obstacles and drivers for a further dissemination of Industrial symbiosis within the EU, and suggest key points for further assessment and development on a potential way forward. From the literature review and framework conditions assessed, general recommendations are provided whereof many relate to the potential benefits of focusing more on development and re-development of indirect incentive schemes fostering symbiotic behavior in industries as opposed to focusing only on designing policies exclusively based on direct top-down regulations. From the case analysis, several examples of more context-specific drivers and obstacles were highlighted as valuable in the given situation including the potential benefit of more flexible funding schemes, the importance of positive value-based communication to gain political support on the local, regional and national environment, feed-in tariffs and tax reliefs and the relevance of having centralized legal organs with specialized competencies on regional or national level to support development and implementation efforts.}, - isbn = {2020.124351}, - keywords = {Bio,Case study,Energy,Framework conditions,Industrial symbiosis,Maabjerg,Policy review}, - file = {/Users/fabio/Zotero/storage/F5QHBDRY/full-text.pdf} -} - -@misc{Lyman2014, - title = {Lyman / {{Mulier Filament Extruder V5}} by Hlyman - {{Thingiverse}}}, - author = {Lyman, H}, - year = {2016}, - urldate = {2016-07-13}, - howpublished = {http://www.thingiverse.com/thing:380987}, - keywords = {3D objects,3D printing,digital design,fabrication,laser,laser cutter,physical objects,rapid prototyping,reprap,thingaverse,things,thingyverse} -} - -@article{m.MulticriteriaDecisionMaking2021, - title = {A Multi-Criteria Decision Making Method for Vapor Smoothening Fused Deposition Modelling Part}, - author = {M., Sugavaneswarn and B., Prashanthi and A., John Rajan}, - year = {2021}, - month = sep, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-08-2020-0184}, - urldate = {2021-09-15}, - keywords = {Additive manufacturing,Fused deposition modeling,Material extrusion process,Multi-criteria decision-making (MCDM),Post-processing,TOPSIS,Vapor smoothening} -} - -@article{Ma2020, - title = {Factors for Eliminating Plastic in Packaging: {{The European FMCG}} Experts' View}, - author = {Ma, Xuezi and Park, Curie and Moultrie, James}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {256}, - pages = {120492}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120492}, - urldate = {2022-01-04}, - abstract = {The fast-moving-consumer-goods (FMCG) sector is in the spotlight as a culprit for the current plastic waste problem. However, few studies provide insight into plastic elimination from the FMCG perspective. This qualitative study explores what the FMCG industry encounters when they attempt to address the plastic packaging issue. We conducted 13 semi-structured interviews with selected managers and technology experts in 7 European FMCGs. The analysis uses am original approach, named `the Factor Mapping Grid', developed to stimulate responses from participants and map relationships between different factors. Results include 7 critical factors, and show that FMCG managers believe that pressure from ``consumers'' is the most prominent factor in reducing plastic. But, consumers are also equally viewed as a barrier to transition and thus act as a double-edged sword for FMCGs, depending on their awareness of plastic as an issue, and their willingness to take actions. All firms view legislation as an important enabler, but acknowledge that this is out of their control. It is evident that for industry, there is a general desire to reduce plastic, but there is a reluctance to be the first, and thus, a `we will if you will' phenomenon is observed.}, - keywords = {FMCG,Packaging,Plastic reduction,Zero plastic} -} - -@article{maaskantStrategicSelectionTool2023, - title = {Strategic Selection Tool for Thermoplastic Materials in a Renewable Circular Economy: {{Identifying}} Future Circular Polymers}, - shorttitle = {Strategic Selection Tool for Thermoplastic Materials in a Renewable Circular Economy}, - author = {Maaskant, Evelien and Post, Wouter and Brouwer, Marieke T. and {van Es}, Daan S. and {Thoden van Velzen}, {\relax Eggo}. U.}, - year = {2023}, - month = jun, - journal = {Sustainable Production and Consumption}, - volume = {38}, - pages = {174--185}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.04.005}, - urldate = {2023-05-01}, - abstract = {To progress towards a renewable circular economy for thermoplastic materials it is imperative to decouple from fossil feedstocks, to maximise looping strategies and to manufacture occasionally littered articles from readily biodegradable materials. This transition is complex due to the combination of stringent technical specifications that are required for ordinary plastic products and the demands that all end-of-life scenarios foist on these products. The presented strategic material selection tool for fast moving consumer goods in a renewable circular economy prioritises their suitability for the expected end-of-life fates and the contrived technical performance. This framework is tested for 17 common consumer articles and 21 biobased plastics. The strategic selection tool shows that consumer articles that are made from foamed and fibrous plastics, such as matrasses and textiles, can potentially be produced from biobased alternatives, such as biobased poly(ethylene terephthalate) (PET), poly(trimethylene terephthalate) (PTT), poly(butylene succinate) (PBS), poly(butylene succinate-co-adipate) (PBSA) and poly(butylene adipate-co-terephthalate) (PBAT). On the other hand, the tool also reveals that there are currently no adequate alternatives in barrier (food) packages and in elastomeric products such as tyres, soles of footwear and gloves. Biobased PET is a good polymer for beverage bottles provided that the leakage to the natural environment is minimised with an effective collection, reuse and recycling system. Although there are no viable single-biobased-polymeric alternatives for flexible packages to pack for instance dried foods, solutions could be developed in the form of multi-layered films of various biobased and biodegradable materials. But it would also imply that a dedicated new recycling technology needs to be developed for such multilayer films. The presented tool demonstrates that the technology is ready to start the transition towards a renewable circular economy for consumer articles such as matrasses, cushions, beverage bottles. Simultaneously, new biobased polymeric solutions need to be developed for multiple other applications such as tyres, footwear, gloves and flexible barrier packaging.}, - langid = {english}, - keywords = {Biobased plastics,Biodegradable plastics,Circular economy,End-of-life strategies,Fast moving consumer goods,Technical framework}, - file = {/Users/fabio/Zotero/storage/4U9B78DV/Maaskant et al_2023_Strategic selection tool for thermoplastic materials in a renewable circular.pdf;/Users/fabio/Zotero/storage/97IRSDJX/S2352550923000775.html} -} - -@article{mabonWhoseKnowledgeCounts2022, - title = {Whose Knowledge Counts in Nature-Based Solutions? {{Understanding}} Epistemic Justice for Nature-Based Solutions through a Multi-City Comparison across {{Europe}} and {{Asia}}}, - shorttitle = {Whose Knowledge Counts in Nature-Based Solutions?}, - author = {Mabon, Leslie and Barkved, Line and {de Bruin}, Karianne and Shih, Wan-Yu}, - year = {2022}, - month = oct, - journal = {Environmental Science \& Policy}, - volume = {136}, - pages = {652--664}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.07.025}, - urldate = {2022-08-10}, - abstract = {There is increasing advocacy from academics, international agenda-setting organisations, and cities themselves for expert- and evidence driven approaches to multiple aspects of urban climate change and sustainability, including nature-based solutions. However, given growing interest in nature-based solutions research and practice towards questions of justice, it is important that the knowledge systems used to inform decisions about urban nature-based solutions are critically scrutinised. We use the lens of epistemic justice \textendash{} justice in knowledge, with regard to how society defines a problem and the range of possible solutions \textendash{} to assess nature-based solutions actions for climate adaptation and resilience across five cities: Amsterdam, Glasgow, Hanoi, Oslo, and Taipei. Our study finds common issues: the risk of quantifiable evidence about the distribution of NbS and its benefits closing down the aims of NbS strategies to meeting narrowly-defined indicators; the potential for self-defined communities of experts becoming de facto authorities on NbS; and the need for those tasked with implementing NbS `on the ground' to have access to the fora and knowledge systems in which NbS strategies are developed. A key message is that more participation alone is insufficient to address epistemic justice concerns, unless it comes at a stage where a broad range of stakeholders (and their knowledges) can influence adaptation strategies and the role of NbS within them. Given the inter- and transdisciplinary nature of NbS scholarship, we argue attention must be focused on the potential for exclusion of key knowledge systems from policy and governance processes.}, - langid = {english}, - keywords = {Climate adaptation,Epistemic justice,Nature-based solutions,Resilience,Urban greening}, - file = {/Users/fabio/Zotero/storage/XMVWI5ET/Mabon et al_2022_Whose knowledge counts in nature-based solutions.pdf;/Users/fabio/Zotero/storage/W7X8A9SE/S1462901122002337.html} -} - -@article{maca-millanPaymentEcosystemServices2021, - title = {Payment for Ecosystem Services and Motivational Crowding: {{Experimental}} Insights Regarding the Integration of Plural Values via Non-Monetary Incentives}, - author = {{Maca-Mill{\'a}n}, Stefany and {Arias-Ar{\'e}valo}, Paola and {Restrepo-Plaza}, Lina}, - year = {2021}, - month = dec, - journal = {Ecosystem Services}, - volume = {52}, - pages = {101375}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2021.101375}, - urldate = {2021-12-01} -} - -@article{Maciel2019, - title = {Environmental Performance of {{3D-Printing}} Polymerisable Ionic Liquids}, - author = {Maciel, Vin{\'i}cius Gon{\c c}alves and Wales, Dominic J. and Seferin, Marcus and Sans, Victor}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {214}, - pages = {29--40}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.241} -} - -@article{Mackay2017, - title = {The Globalising World of {{DIY}} House Improvement: Interpreting a Cultural and Commercial Phenomenon}, - author = {Mackay, Michael and Perkins, Harvey C.}, - year = {2017}, - journal = {Housing Studies}, - volume = {32}, - number = {6}, - pages = {758--777}, - publisher = {{Routledge}}, - issn = {14661810}, - doi = {10.1080/02673037.2016.1234031}, - abstract = {This paper reports a study of DIY house improvement focusing on its globalising material and commercial elements. Using a multi-method approach and a New Zealand case study we illustrate the importance in housing studies, and research into homemaking in particular, of taking account of DIY practice. We emphasise that it is not possible for housing researchers to account fully for the role and function of DIY without interpreting it as a cultural and economic phenomenon. The ways people live in and make their houses demands a focus on DIY practices, identity, homeownership, government regulation and the globalising commercial features of DIY which include: international product manufacturing, big-box retailing, tool and materials distribution and advertising, the production of printed and digital instructional material, and new popular media forms, such as DIY reality television. DIY is thus an excellent example of culture and economy combined. \textcopyright{} 2016 Informa UK Limited, trading as Taylor \& Francis Group.}, - keywords = {culture and economy;,DIY house improvement;,Home;,New Zealand,work-leisure;}, - file = {/Users/fabio/Zotero/storage/9RR5MZJI/The globalising world of DIY house improvement interpreting a cultural and commercial phenomenon.pdf} -} - -@article{Mackay2017a, - title = {The Performance of the Hot End in a Plasticating {{3D}} Printer}, - author = {Mackay, Michael E. and Swain, Zachary R. and Banbury, Colby R. and Phan, David D. and Edwards, David A.}, - year = {2017}, - journal = {Journal of Rheology}, - volume = {61}, - number = {2}, - pages = {229--236}, - issn = {0148-6055}, - doi = {10.1122/1.4973852}, - abstract = {The failure (maximum) feed velocity in a LulzBot Taz 4 3D printer at various temperatures is determined for three polymers: Acrylonitrile butadiene styrene, poly(lactic acid) (PLA), and a PLA polyhydroxybutyrate copolymer. Through an approximate solution of the energy balance, we develop a model to correlate the dimensionless fiber feed velocity (represented by a P\'eclet number) with a dimensionless temperature. Using these dimensionless parameters, all polymers fall onto the same curve. However, when molten polymer is forced through a small nozzle to enable 3D printing, this curve also depends on another parameter: Nozzle diameter. Our model does not account for this parameter because it does not consider hydrodynamics due to the complexity of the coupled energy and momentum balances. Thus, we modify the P\'eclet number to account for hydrodynamics and produce a satisfactory master curve for all diameters and polymers. Our dimensionless numbers require determining the polymer thermal and rheological propert...}, - file = {/Users/fabio/Zotero/storage/HBL48YRX/pubj49.pdf} -} - -@article{Macke2019, - title = {Smart Sustainable Cities Evaluation and Sense of Community}, - author = {Macke, Janaina and Rubim Sarate, Jo{\~a}o Alberto and {de Atayde Moschen}, Suane}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118103}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118103} -} - -@article{mackenzieThereNoSuch2020, - title = {There Is No Such Thing as a Short-Term Issue}, - author = {MacKenzie, Michael K.}, - year = {2020}, - month = nov, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102652}, - urldate = {2020-11-23} -} - -@article{maCreatingNovelFurniture2021, - title = {Creating Novel Furniture through Topology Optimization and Advanced Manufacturing}, - author = {Ma, Jiaming and Li, Zhi and Zhao, Zi-Long and Xie, Yi Min}, - year = {2021}, - month = aug, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-03-2021-0047}, - urldate = {2021-08-24}, - keywords = {Advanced manufacturing,BESO,Furniture,Topology optimization} -} - -@article{maddaleneCircularityCitiesComparative2023, - title = {Circularity in Cities: {{A}} Comparative Tool to Inform Prevention of Plastic Pollution}, - shorttitle = {Circularity in Cities}, - author = {Maddalene, Taylor and Youngblood, Kathryn and Abas, Azlan and Browder, Keri and Cecchini, Edith and Finder, Sheridan and Gaidhani, Saurabh and Handayani, Wiwandari and Hoang, Nguyen Xuan and Jaiswal, Kunal and Martin, Ellen and Menon, Sanskriti and O'Brien, Quinn and Roy, Parama and Septiarani, Bintang and Trung, Nguyen Hieu and Voltmer, Chever and Werner, Madison and Wong, Ricardo and Jambeck, Jenna R.}, - year = {2023}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {198}, - pages = {107156}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107156}, - urldate = {2023-08-31}, - abstract = {Cities bear a large burden of plastic management and pollution, which is not consistently recognized. The `circular economy' has become an aspiration for reducing pollution and increasing sustainability, though quantification and monitoring methods are not consistent. We compare data from six cities participating in the Urban Ocean\textregistered{} program that utilized the Circularity Assessment Protocol (CAP) in India, Indonesia, Malaysia, Panama, and Vietnam. CAP is a standardized methodology used to quantify circular materials management and collect community-level data to inform decision-making. Results show that plastic items and packaging represent over 90\% of fast-moving consumer goods, 78\% of to-go items, and 69\% of all litter items, presenting challenges to local formal and informal waste management systems. These results support solutions that meet an individual city's needs and reflect the materials and challenges present. City-level data facilitates knowledge exchange between communities, which can lead to an effective network of more circular cities worldwide.}, - keywords = {Circular cities,Circular economy,Plastic pollution,Sustainability,Waste management}, - file = {/Users/fabio/Zotero/storage/W9C4H8T8/S0921344923002914.html} -} - -@article{Madival2009, - title = {Assessment of the Environmental Profile of {{PLA}}, {{PET}} and {{PS}} Clamshell Containers Using {{LCA}} Methodology}, - author = {Madival, Santosh and Auras, Rafael and Singh, Sher Paul and Narayan, Ramani}, - year = {2009}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {17}, - number = {13}, - pages = {1183--1194}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2009.03.015}, - urldate = {2014-06-09}, - file = {/Users/fabio/Zotero/storage/HWB9E6D9/Assessment of the environmental profile of PLA, PET and PS clamshell containers using LCA methodology.pdf} -} - -@article{Madrid2009, - title = {Reproducible {{Research}} in {{Computational Science}}}, - author = {Peng, R. D.}, - year = {2011}, - month = dec, - journal = {Science}, - volume = {334}, - number = {6060}, - eprint = {0901.4552}, - pages = {1226--1227}, - issn = {0036-8075}, - doi = {10.1126/science.1213847}, - abstract = {We derive the ranking of the astronomical observatories with the highest impact in astronomy based on the citation analysis of papers published in 2006. We also present a description of the methodology we use to derive this ranking. The current ranking is lead by the Sloan Digital Sky Survey, followed by Swift and the Hubble Space Telescope.}, - archiveprefix = {arxiv}, - file = {/Users/fabio/Zotero/storage/CJAX5FE3/peng2011.pdf} -} - -@book{Maes2013, - title = {An Analytical Framework for Ecosystem Assessments under Action 5 of the {{EU}} Biodiversity Strategy to 2020}, - author = {Maes, Joachim and Teller, Anne and Erhard, Markus and Liquete, Camino and Braat, Leon and Berry, P. and Egoh, Benis and Puydarrieus, P. and Fiorina, Christel and Santos, F. and Paracchini, Maria L. and Keune, H. and Wittmer, Heidi and Hauck, Jennifer}, - year = {2013}, - journal = {Publications office of the European Union, Luxembourg}, - number = {127}, - doi = {10.2779/12398}, - urldate = {2021-04-13}, - abstract = {Action 5 of the EU Biodiversity Strategy to 2020 calls Member States to map and assess the state of ecosystems and their services in their national territory with the assistance of the European Commission. The objective of this discussion paper is to support the development of a coherent analytical framework to be applied by the EU and its Member States in order to ensure consistent approaches are used. In line with the Millennium Ecosystem assessment, the objective of the EU assessment is to provide a critical evaluation of the best available information for guiding decisions on complex public issues. It is therefore framed by a broad set of key policy questions. It is structured around a conceptual framework that links human societies and their well-being with the environment. More specifically, the paper proposes a typology of ecosystems to be assessed and mapped and the use of the Common International Classification of Ecosystem Services (CICES) developed for environmental accounting purposes. 1}, - isbn = {978-92-79-29369-6}, - file = {/Users/fabio/Zotero/storage/4UHM7BXL/full-text.pdf} -} - -@techreport{Maes2015, - title = {Mapping and {{Assessment}} of {{Ecosystems}} and Their {{Services Trends}} in Ecosystems and Ecosystem - {{JRC}} Report Number {{JRC94889}}}, - author = {Maes, Joachim and Fabrega, Nina and Zulian, Grazia and Barbosa, Ana and Ivits, Eva and Polce, Chiara and Vandecasteele, Ine and Mar{\'i}, In{\'e}s and Guerra, Carlos and Castillo, Carolina Perpi{\~n}a and Vallecillo, Sara and Baranzelli, Claudia and Barranco, Ricardo and Batista, Filipe and Trombetti, Marco and Lavalle, Carlo}, - year = {2015}, - doi = {10.2788/341839}, - urldate = {2021-03-19}, - abstract = {This report presents an analysis of the trends in the spatial extent of ecosystems and in the supply and use of ecosystem services at the European scale between 2000 and 2010. In the EU urban land and forests increased while cropland, grassland and heathland decreased. Other ecosystem types underwent smaller changes. The main trends in provisioning, regulating and maintenance, and cultural ecosystem services were assessed using a set of 30 indicators assorted according to the CICES classification. More crops for food, feed and energy were produced in the EU on less arable land. More organic food was grown. Textile crop production and the total number of grazing livestock decreased. Water use relative to water availability remained stable. Timber removals increased but so, too, did the total timber stock. There was an increase in net ecosystem productivity (growing biomass). Several regulating services, but in particular those which are related to the presence of trees, woodland or forests, increased slightly. This was the case for water retention, forest carbon potential, erosion control, and air quality regulation. Pollination potential and habitat quality showed a negative trend. There was a positive trend in the opportunity for citizens to have access to land with a high recreation potential.}, - isbn = {9789279462061}, - file = {/Users/fabio/Zotero/storage/L8R6GGWH/full-text.pdf} -} - -@article{Magadley2009, - title = {Innovation {{Labs}}: {{An Examination}} into the {{Use}} of {{Physical Spaces}} to {{Enhance Organizational Creativity}}}, - author = {Magadley, Wissam and Birdi, Kamal}, - year = {2009}, - journal = {Creativity and Innovation Management}, - volume = {18}, - number = {4}, - pages = {315--325}, - issn = {09631690}, - doi = {10.1111/j.1467-8691.2009.00540.x}, - abstract = {Recent years have seen an increase in the number of innovation labs, purpose-built physical facilities designed to enhance and support creativity and innovation in organizations. This rising phenomenon may be driven by the increasing emphasis placed on innovation as the key to the survival of modern day organizations. Innovation labs are attracting greater attention from organizations, yet little is known about their effectiveness. Using a mixed-method approach this paper aims to evaluate the effectiveness of a major UK-based facility in enhanc- ing creativity and to explore users' attitudes towards this rising organizational phenomenon. The findings have implications for the management of existing innovation labs and those in the planning.}, - isbn = {1467-8691}, - pmid = {45132354} -} - -@article{magalhaesGreenInvestmentParadigm2021, - title = {The Green Investment Paradigm: {{Another}} Headlong Rush}, - author = {Magalh{\~a}es, Nelo}, - year = {2021}, - month = dec, - journal = {Ecological Economics}, - volume = {190}, - pages = {107209}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107209}, - urldate = {2021-09-15} -} - -@article{magaLifeCycleAssessment2019, - title = {Life Cycle Assessment of Recycling Options for Polylactic Acid}, - author = {Maga, Daniel and Hiebel, Markus and Thonemann, Nils}, - year = {2019}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {149}, - pages = {86--96}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2019.05.018}, - urldate = {2021-06-09}, - abstract = {This paper presents an attributional life cycle assessment for different recycling technologies for post-industrial and post-consumer polylactic acid (PLA)waste in Germany. The study investigates mechanical recycling of post-industrial and post-consumer PLA waste as well as solvent based recycling and chemical recycling of post-consumer PLA waste. Recycling of PLA waste is exclusively compared to thermal treatment since a comparison of the different recycling options is not possible due to different qualities of the waste streams and of the products. The life cycle impact results show environmental benefits of all recycling technologies. Environmental benefits are achieved by replacing virgin PLA with PLA recyclates. The substitution of virgin PLA by recyclates leads to higher savings of greenhouse gas emissions compared to incineration. Depending on the recycling technology, savings are 0.3\textendash 1.2 times higher. The lower global warming impact goes along with higher savings in primary energy demand and less fossil resource depletion. Apart from benefits related to global warming impact and energy, the comparison between thermal treatment and the recycling shows benefits in the category agricultural land occupation since biomass cultivation is avoided. Further environmental benefits are achieved in the impact categories photochemical ozone formation, terrestrial and aquatic eutrophication, acidification, and particulate matter due to avoided biomass cultivation, harvesting, and transportation. The latter three impacts are mainly influenced by agricultural activities and transportation, whereas eutrophication is driven by fertilization. The results demonstrate that recycling of PLA products can contribute to a better environmental performance of PLA products in their life cycle.}, - keywords = {End-of-life,LCA,Life cycle assessment,Polylactic acid,Recycling,Thermal treatment}, - file = {/Users/fabio/Zotero/storage/T6N7BCJI/full-text.pdf} -} - -@article{Maghsoodloo2004, - title = {Strengths and Limitations of Taguchi's Contributions to Quality, Manufacturing, and Process Engineering}, - author = {Maghsoodloo, Saeed and Ozdemir, Guttekin and Jordan, Victoria and Huang, Chen-Hsiu}, - year = {2004}, - month = jan, - journal = {Journal of Manufacturing Systems}, - volume = {23}, - number = {2}, - pages = {73--126}, - issn = {02786125}, - doi = {10.1016/S0278-6125(05)00004-X}, - keywords = {or-,parameter design,quality loss functions,sig-,taguchi methods,thogonal arrays,tolerance design}, - file = {/Users/fabio/Zotero/storage/3DSDSFME/Strengths and limitations of taguchi's contributions to quality, manufacturing, and process engineering.pdf} -} - -@inproceedings{Magi2015, - title = {Material Recycling and Improvement Issues in Additive Manufacturing}, - booktitle = {Proceedings of the {{International Conference}} of {{DAAAM Baltic}} "{{Industrial Engineering}}"}, - author = {M{\"a}gi, P and Krumme, A and Pohlak, M}, - year = {2015}, - volume = {2015-Janua}, - pages = {63--68}, - issn = {23466138}, - isbn = {978-1-5108-2263-4}, - keywords = {additive manufacturing}, - file = {/Users/fabio/Zotero/storage/GXB27E8U/material recycling and improvement issues in additive manufacturing.pdf} -} - -@article{Magi2016, - title = {Recycling of {{PA-12}} in {{Additive Manufacturing}} and the {{Improvement}} of Its {{Mechanical Properties}}}, - author = {M{\"a}gi, Piret and Krumme, Andres and Pohlak, Meelis}, - year = {2016}, - month = jan, - journal = {Key Engineering Materials}, - volume = {674}, - pages = {9--14}, - issn = {1662-9795}, - doi = {10.4028/www.scientific.net/KEM.674.9}, - abstract = {This study explores possible ways to make Additive Manufacturing (AM) a cradle-to-cradle process, that is, use the leftover from one process as the raw material for another process. The main goal of this study is to develop a set of new polymeric blends with innovative properties, suitable for using in 3-D printing of prosthetic limbs using Fused Deposition Modeling (FDM) technology. Sustainable acting is achieved by reusing polymeric material left over from Selective Laser Sintering (SLS) processes for making raw material for FDM processes. Test specimens of polyamide 12 (PA-12) in its virgin form and used- , un-sintered form alongside specimens of used PA blended with TPU, aramid, or graphite, were produced in a micro-injection moulding machine and then tested for their mechanical properties. This paper provides information about the differences in mechanical characteristics of these different material blends. An unexpected but positive finding was that the differences between virgin and recycled PA-12 are insignificant. The aforementioned additives influenced PA-12 by producing specimens that responded with predictable characteristics which is a significant accomplishment as it lays the groundwork for the next stages of the project.}, - isbn = {9783038356554}, - keywords = {a cradle-to-,abstract,additive manufacturing,am,cradle process,fused deposition,manufacturing,material recycling,modeling,one process as the,polyamide composite,polyamide-12,process,prostheses,raw material for another,selective laser sintering,that is,this study explores possible,use the leftover from,ways to make additive}, - file = {/Users/fabio/Zotero/storage/HRGEVZPY/Mägi, Krumme, Pohlak - 2016 - Recycling of PA-12 in Additive Manufacturing and the Improvement of its Mechanical Properties.pdf} -} - -@article{Magistretti2020, - title = {Searching for the Right Application: {{A}} Technology Development Review and Research Agenda}, - author = {Magistretti, Stefano and Dell'Era, Claudio and Verganti, Roberto}, - year = {2020}, - month = feb, - journal = {Technological Forecasting and Social Change}, - volume = {151}, - pages = {119879}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119879} -} - -@article{magnierTurningOceanGarbage2019, - ids = {magnier2019a}, - title = {Turning Ocean Garbage into Products \textendash{} {{Consumers}}' Evaluations of Products Made of Recycled Ocean Plastic}, - author = {Magnier, Lise and Mugge, Ruth and Schoormans, Jan}, - year = {2019}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {215}, - pages = {84--98}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.246}, - urldate = {2020-06-18}, - abstract = {This research investigates consumers' responses to products made of recycled ocean plastic. A quantitative study was conducted online with 258 Dutch consumers in which attitudinal and behavioural responses to products made of ocean plastic were investigated. The most important predictors of consumers' purchase intention were anticipated conscience, value for money and perceived functionality. In addition, risks of contamination negatively influenced purchase intention. For willingness-to-pay (WTP) a price premium, anticipated conscience, recognisability and perceived safety appeared to be the most important predictors. Through a cluster analysis, four different consumer groups were identified. Two consumer clusters consisting of `sustainability experts' and the `sustainability benevolent' (59\% of our sample) demonstrated a strong interest and a willingness to pay a price premium for these products. When comparing consumers' responses in different product categories, results showed that quality expectations and purchase intention were generally lower for textile products than for durables and fast-moving consumer goods packages. This research contributes to the theoretical understanding of consumer responses to products made of recycled ocean plastic and can help companies to develop strategies to launch such products effectively.}, - keywords = {Behaviour,Circular economy,Consumers' evaluations,Consumers' evaluations,Ocean plastic,Recycled}, - file = {/Users/fabio/Zotero/storage/IPUTDDNN/Magnier et al_2019_Turning ocean garbage into products – Consumers’ evaluations of products made.pdf;/Users/fabio/Zotero/storage/2BLPZZLF/S0959652618339684.html} -} - -@article{magnussonIndustrialEcologyBoundaries2019, - title = {Industrial Ecology and the Boundaries of the Manufacturing Firm}, - author = {Magnusson, Thomas and Andersson, Hans and Ottosson, Mikael}, - year = {2019}, - month = oct, - journal = {Journal of Industrial Ecology}, - volume = {23}, - number = {5}, - pages = {1211--1225}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.12864}, - urldate = {2022-01-25}, - abstract = {Decisions on organizational boundaries are critical aspects of manufacturing firms' business strategies. This article brings together concepts and findings from industrial ecology and business strategy in order to understand how manufacturing firms engage in initiatives to facilitate recycling of process wastes. Based on a distinction between waste recovery and use of the recovered resources, the article introduces a typology of four different strategies: Closed, Outsourcing, Diversification, and Open. Each strategy has a unique set of organizational boundaries and is associated with different motives and benefits for the manufacturing firm. The typology of strategies provides a conceptual contribution to assist industrial managers in strategic decision-making, and to support further studies on organizational boundaries in industrial ecology research.}, - keywords = {business strategy,diversification,industrial organization,industrial symbiosis,organizational boundaries,outsourcing}, - file = {/Users/fabio/Zotero/storage/XTKIK8WA/full-text.pdf} -} - -@article{maherCircularEconomyBusiness2023, - title = {Circular Economy 4 Business: {{A}} Program and Framework for Small-to-Medium Enterprises ({{SMEs}}) with Three Case Studies}, - shorttitle = {Circular Economy 4 Business}, - author = {Maher, Ray and Yarnold, Jennifer and Pushpamali, N. N. C.}, - year = {2023}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {137114}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137114}, - urldate = {2023-05-01}, - abstract = {To address a gap in empirical evidence, this article provides case studies of three SMEs implementing circular business models through a training program. It highlights lessons for both policy makers and training providers to support uptake of CE practices in SMEs. Governments and companies increasingly recognise the importance of a circular economy to address environmental problems, maximise the value of materials used in production-consumption cycles, and eliminate waste. This article draws attention to the role that small to medium enterprises (SMEs) play in developing niche innovations to advance the circular transition, and provides insights on how SMEs can be enabled through supportive government programs and policies. We first describe the design and outcomes of a government-funded training and pilot program, `Circular Economy 4 Business' that was trialled in Queensland, Australia in 2020\textendash 21. Using data obtained during the program, we provide three case studies of circular business models employed by three participating SMEs to improve circularity for important resource types (organics, textiles, packaging, and construction materials) as well as the main successes and opportunities, challenges, and barriers each business encountered. Drawing upon the multi-level perspective of sustainable socio-technical transitions theory, we examine the interdependency of cultural, market, and policy factors to highlight how governments can provide conditions that foster enable niche innovations to scale and displace established linear regimes. The significance of this study builds on the limited empirical evidence of circular business model implementation at the level of SMEs and details a novel and practical training and support program that can guide future design of circular economy programs tailored specifically for SMEs.}, - langid = {english}, - keywords = {Circular economy,Small and medium enterprises (SMEs),Sustainability,Systems thinking}, - file = {/Users/fabio/Zotero/storage/75Q4DB4Q/S0959652623012726.html} -} - -@article{Mahesh2003, - title = {Integrated Decision Support System for Selection of {{RP Processes}}}, - author = {Mahesh, M and Loh, H T and Wong, Y S and Fuh, J Y H}, - year = {2003}, - pages = {174--185}, - keywords = {benchmarking,characterization,decision support,process,process optimization,saturated database,six-sigma}, - file = {/Users/fabio/Zotero/storage/LMKGMXM6/Integrated decision support system for selection of RP Processes.pdf} -} - -@phdthesis{Mahesh2004, - title = {Rapid {{Prototyping}} and {{Manufacturing Benchmarking}}}, - author = {Mahesh, M.}, - year = {2004}, - school = {National University of Singapore}, - file = {/Users/fabio/Zotero/storage/EYVA7W3Y/Rapid Prototyping and Manufacturing Benchmarking.pdf} -} - -@inproceedings{Mahesh2005, - title = {Benchmarking for Decision Making in Rapid Prototyping Systems}, - booktitle = {{{IEEE International Conference}} on {{Automation Science}} and {{Engineering}}, 2005.}, - author = {Mahesh, M. and Fuh, J.Y.H. and Wong, Y.S. and Loh, H.T.}, - year = {2005}, - pages = {19--24}, - publisher = {{IEEE}}, - doi = {10.1109/COASE.2005.1506739}, - urldate = {2014-02-02}, - isbn = {0-7803-9425-9}, - file = {/Users/fabio/Zotero/storage/SAKZTWK4/Benchmarking for decision making in rapid prototyping systems.pdf} -} - -@article{Mahesh2006, - title = {A {{Six-sigma}} Approach for Benchmarking of {{RP}}\&{{M}} Processes}, - author = {Mahesh, M. and Wong, Y. S. and Fuh, J. Y. H. and Loh, H. T.}, - year = {2006}, - month = jan, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {31}, - number = {3-4}, - pages = {374--387}, - issn = {0268-3768}, - doi = {10.1007/s00170-005-0201-z}, - urldate = {2013-06-11}, - keywords = {abbreviations gbp,benchmarking,bl,blend,cf,chamfer,characterization,decision support,geometric benchmark part,mbp,mechanical benchmark part,process,process optimization,six-sigma}, - file = {/Users/fabio/Zotero/storage/NKDIHSRJ/A Six-sigma approach for benchmarking of RP&M processes.pdf} -} - -@article{Maheshbabu2020, - title = {Waste Reduction Using Lean Tools in a Multicultural Environment}, - author = {{Mahesh babu}, Purushothaman and Jeff, Seadon and Dave, Moore}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {265}, - pages = {121681}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121681}, - urldate = {2020-05-10}, - abstract = {There is a significant body of knowledge linking lean tools to waste reduction. This research considered system-wide relationships that enabled lean tools to aid waste reduction in industrial processes in a multicultural workplace environment in organisations that previously committed to Lean practices. Ten categories of waste prevalent in industry were categorised into manufacturing, non-manufacturing and well-being. Seven case studies from five companies were conducted which sought to establish the relationship between lean tools and waste in their processes. The study was based on interviews that highlighted the positive and negative impacts that lean tools have on waste. The study generally found a strong connectivity between lean tools and manufacturing waste reduction. However, the key performance indicators (KPIs) tool increased non-manufacturing waste and six lean tools increased well-being waste. Additionally, the findings indicate that some tools can be counter-productive to waste reduction in an industrial system when non-manufacturing and well-being are taken into account. Lean tools were resilient enough that implementation in multicultural workplaces, even with transient populations, did not influence waste generation.} -} - -@article{Mahmud2021, - title = {Integration of Techno-Economic Analysis and Life Cycle Assessment for Sustainable Process Design \textendash{} {{A}} Review}, - author = {Mahmud, Roksana and Moni, Sheikh Moniruzzaman and High, Karen and {Carbajales-Dale}, Michael}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {317}, - pages = {128247}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128247}, - urldate = {2021-08-23}, - abstract = {For sustainable design, technology developers need to consider not only technical and economic aspects but also potential environmental impacts while developing new technologies. Techno economic analysis (TEA) evaluates the technical performance and economic feasibility of a technology. Life cycle assessment (LCA) evaluates the potential environmental impacts associated with a product system throughout its life cycle from raw material extraction to disposal. Generally, TEA and LCA performed separately for technology assessment. Understanding of the trade-off between economic and environmental performance is crucial for sustainable process design, which is not fully available if TEA and LCA is performed separately. In contrast, integration of TEA and LCA enables systematic analysis of the relationships between technical, economic, and environmental performance and provides more information to technology developers for trade-off analysis. Integrated TEA-LCA tool can also reduce inconsistency between system boundaries, functional units, and assumptions that can arise from using standalone TEA and LCA findings in decision making. There is also growing interest of prospective application of integrated TEA-LCA tool to evaluate emerging technologies at early technology readiness level (TRL). Integration of TEA and LCA is still an evolving area and requires further exploration to develop a consistent methodological guideline. The goal of this study is to review the current state-of-the-art in TEA and LCA to identify the methodological challenges of TEA-LCA integration approaches. This study also identifies major challenges to perform integrated TEA-LCA analysis of emerging technologies at low TRLs. Lack of consistent methodological guidelines and compatible software tools, inconsistent system boundary and functional unit selection, limited data availability and uncertainty are key methodological challenges for integration of LCA and TEA. Future research should focus on developing integrated TEA-LCA tool, formulating approach to incorporate optimization method with integrated TEA-LCA tool, and developing strategy of proper communication of results from integrated LCA-TEA tool to broad range of stakeholders.}, - keywords = {Emerging technology,Integration,Life cycle assessment (LCA),Sustainable process design,Techno-economic analysis (TEA),Technology readiness level (TRL)} -} - -@article{Mahto2020, - title = {Abundance \textendash{} {{A}} New Window on How Disruptive Innovation Occurs}, - author = {Mahto, Raj V. and Belousova, Olga and Ahluwalia, Saurabh}, - year = {2020}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {155}, - pages = {119064}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2017.09.008}, - urldate = {2020-05-21}, - abstract = {The economic philosophy of abundance has provided a new portal to view disruptive innovation. After decades of the world's middle class shrinking and the poor becoming poorer the abundance concept has created an interest in the ``Rising Billion'' transforming the poor into a more viable economic force and grow a worldwide vibrant middle class throughout the developed, developing and underdeveloped world. The abundance concept provides a new set of potential problems that are spurring new opportunities. The 21st century grand challenges have been enumerated by many but include at least six key basic human necessities: healthcare; water, education; food generation, energy, and the environment. The key to ``Abundance'' is to better understand the disruptive innovation phenomena, and how it can be used for social change. Scholars have utilized different perspectives to explain innovation phenomenon, but literature on disruptive innovation can benefit from a coherent theoretical framework that can explain origins of disruptive innovation and the role of scarcity/abundance in that process. In this paper, we provide one such theoretical framework to better explain and understand the relationship among scarcity, abundance, and innovation concepts from a market perspective. More specifically, this paper address the need to understand how radical or disruptive innovations occur to create a more abundant world and what market conditions motivates innovators, especially in communities enduring poverty and scarcity of resources such as the ``Bottom Billion'' and the shrinking middle class to do so. We build a theoretical model of disruptive innovation in a resource-constrained environment by integrating arguments from the theory of social capital, disruptive innovation and entrepreneurial action, and social innovation.} -} - -@article{MaiaChagas2020, - title = {Leveraging Open Hardware to Alleviate the Burden of {{COVID-19}} on Global Health Systems}, - author = {Maia Chagas, Andre and Molloy, Jennifer C. and {Prieto-Godino}, Lucia L. and Baden, Tom}, - year = {2020}, - month = apr, - journal = {Plos Biology}, - volume = {18}, - number = {4}, - pages = {e3000730}, - publisher = {{Public Library of Science}}, - issn = {1545-7885}, - doi = {10.1371/journal.pbio.3000730}, - abstract = {With the current rapid spread of COVID-19, global health systems are increasingly overburdened by the sheer number of people that need diagnosis, isolation and treatment. Shortcomings are evident across the board, from staffing, facilities for rapid and reliable testing to availability of hospital beds and key medical-grade equipment. The scale and breadth of the problem calls for an equally substantive response not only from frontline workers such as medical staff and scientists, but from skilled members of the public who have the time, facilities and knowledge to meaningfully contribute to a consolidated global response. Here, we summarise community-driven approaches based on Free and Open Source scientific and medical Hardware (FOSH) as well as personal protective equipment (PPE) currently being developed and deployed to support the global response for COVID-19 prevention, patient treatment and diagnostics.} -} - -@article{maimoneHolographicNeareyeDisplays2017, - title = {Holographic Near-Eye Displays for Virtual and Augmented Reality}, - author = {Maimone, Andrew and Georgiou, Andreas and Kollin, Joel S.}, - year = {2017}, - month = jul, - journal = {ACM Transactions on Graphics}, - volume = {36}, - number = {4}, - pages = {85:1--85:16}, - issn = {0730-0301}, - doi = {10.1145/3072959.3073624}, - urldate = {2023-07-03}, - abstract = {We present novel designs for virtual and augmented reality near-eye displays based on phase-only holographic projection. Our approach is built on the principles of Fresnel holography and double phase amplitude encoding with additional hardware, phase correction factors, and spatial light modulator encodings to achieve full color, high contrast and low noise holograms with high resolution and true per-pixel focal control. We provide a GPU-accelerated implementation of all holographic computation that integrates with the standard graphics pipeline and enables real-time ({$\geq$}90 Hz) calculation directly or through eye tracked approximations. A unified focus, aberration correction, and vision correction model, along with a user calibration process, accounts for any optical defects between the light source and retina. We use this optical correction ability not only to fix minor aberrations but to enable truly compact, eyeglasses-like displays with wide fields of view (80\textdegree ) that would be inaccessible through conventional means. All functionality is evaluated across a series of hardware prototypes; we discuss remaining challenges to incorporate all features into a single device.}, - keywords = {augmented reality,computational displays,holography,near-eye display,virtual reality}, - file = {/Users/fabio/Zotero/storage/4UZ46LE7/Maimone et al. - 2017 - Holographic near-eye displays for virtual and augm.pdf} -} - -@article{maIntroducingClassificationFramework2023, - title = {Introducing a Classification Framework to Urban Waste Policy: {{Analysis}} of Sixteen Zero-Waste Cities in {{China}}}, - shorttitle = {Introducing a Classification Framework to Urban Waste Policy}, - author = {Ma, Wenting and {de Jong}, Martin and Zisopoulos, Filippos and Hoppe, Thomas}, - year = {2023}, - month = jun, - journal = {Waste Management}, - volume = {165}, - pages = {94--107}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.04.012}, - urldate = {2023-05-10}, - abstract = {Chinese cities are experiencing rapid urban development while facing severe challenges of environmental pollution. China's central government has proposed several policies to reduce urban waste. However, little is known about the adoption of these policies. Here, we raise the question how can circular policies be classified, and how can this classification be applied to cities in China that wish become zero-waste cities? We develop a framework to classify urban waste policies according to: (a) the ``5R'' principles (``Rethink'', ``Reduce'', ``Reuse'', ``Recycle'', and ``Recover''), (b) four types of waste (industrial, agricultural, municipal, and hazardous) and (c) six types of policy instruments (legal, economic, network, communication, innovation and projects). We use this framework to analyze urban waste policies implemented by sixteen zero-waste demonstration projects in China. The present study emphasizes combinations of policy instruments, ``R'' strategy and waste type in the implementation of zero-waste policies. We find that the ``Rethink'', ``Reduce'', and ``Recycle'' principles have been widely implemented by local authorities in contrast to the principles ``Reuse'' and ``Recover''. Local governments address waste management by embracing regulations, innovation instruments, and project arrangements, while network-based, economic, or communicative policy instruments are used less often. Based on the results we suggest that local governments embrace a comprehensive approach to the use of the ``5R'' principles and deploy a diverse portfolio of policy instruments.}, - langid = {english}, - keywords = {``5R'' principles,China,Circular economy,Policy instruments,Urban waste policies,Zero-waste cities}, - file = {/Users/fabio/Zotero/storage/2RCEJYMF/Ma et al. - 2023 - Introducing a classification framework to urban wa.pdf;/Users/fabio/Zotero/storage/DSAD37RV/S0956053X23002891.html} -} - -@article{maioneCircularEconomyPlastic2022, - title = {Towards a Circular Economy for the Plastic Packaging Sector: {{Insights}} from the {{Italian}} Case}, - shorttitle = {Towards a Circular Economy for the Plastic Packaging Sector}, - author = {Maione, Carol and Lapko, Yulia and Trucco, Paolo}, - year = {2022}, - month = nov, - journal = {Sustainable Production and Consumption}, - volume = {34}, - pages = {78--89}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2022.09.002}, - urldate = {2022-09-18}, - abstract = {Achieving a circular economy (CE) has become a strategic priority for the plastic packaging industry to implement long-term business sustainability while meeting legislative requirements. In this view, the evolution of circularity practices in relation to technological, regulatory, and socio-economic factors and the implications for different value chain actors are open streams of research. This study aims to assess trends and meaningful changes in the adoption of circularity practices from the perspective of different value chain actors, under the effects of leading CE barriers and enablers. A longitudinal analysis of the influence of these factors in relation to CE practices adopted by the Italian plastic packaging sector was conducted for the years 2011, 2015, and 2019. The involvement in plastic recovery became a predominant CE strategy over time, thanks to technological availability and a more mature regulatory framework. Our results suggest a gradual shift from scattered CE implementations to a more systemic approach to CE integrating upstream and downstream solutions. However, this transition occurred at different speeds and levels across the supply chain, as companies perceived factors differently and, consequently, implemented different types of CE practices. Therefore, increased collaboration and alignment across the supply chain are still required to overcome existing challenges. Based on our analysis, a focus group with stakeholders and experts of the plastic industry drew possible future avenues for the plastic packaging sector. Suggested priority actions include advancement of new and emerging recycling technologies, prioritization of economically viable and closed-loop alternatives to recover plastic waste, and alignment between national and international CE directives. These results extend our understanding of the CE transition and shed new light on the ways in which the industry can address existing barriers in different tiers for a system-wide impact.}, - langid = {english}, - keywords = {Barriers and enablers,Circular economy,Italy,Plastic packaging}, - file = {/Users/fabio/Zotero/storage/6XNTKDX9/S2352550922002421.html} -} - -@article{Maisel2020, - title = {Preparing {{WEEE}} Plastics for Recycling \textendash{} {{How}} Optimal Particle Sizes in Pre-Processing Can Improve the Separation Efficiency of High Quality Plastics}, - author = {Maisel, Franziska and Chancerel, Perrine and Dimitrova, Gergana and Emmerich, Johanna and Nissen, Nils F. and {Schneider-Ramelow}, Martin}, - year = {2020}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {154}, - pages = {104619}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104619} -} - -@article{maitre-ekernReThinkingProducerResponsibility2020, - title = {Re-{{Thinking Producer Responsibility}} for a {{Sustainable Circular Economy From}} Extended Producer Responsibility to Pre-Market Producer Responsibility}, - author = {{Maitre-Ekern}, El{\'e}onore}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125454}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125454}, - urldate = {2020-12-14} -} - -@article{majumdarCircularFashionProperties2020, - title = {Circular Fashion: {{Properties}} of Fabrics Made from Mechanically Recycled Poly-Ethylene Terephthalate ({{PET}}) Bottles}, - author = {Majumdar, Abhijit and Shukla, Sandeep and Singh, Anshu Anjali and Arora, Sanchi}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104915}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104915}, - urldate = {2020-07-14}, - abstract = {Use of recycled fibres in apparel is being seen as one of the major ways to achieve sustainability and circular economy in textile industry. Waste poly-ethylene terephthalate (PET) bottles create serious disposal problem as they are not biodegradable. In recent years, many companies have started to collect the waste PET bottles and upcycle them, by melting and extruding, into textile grade polyester fibre. This paper presents an exhaustive study on the properties of mechanically recycled polyester fibres and fabrics. The recycled polyester fibre has lower level of crystallinity and tensile strength than its virgin counterpart. The transmission properties like air permeability and moisture vapour permeability of fabric do not change significantly with the increase in proportion of recycled polyester. However, the shear and bending rigidities of woven fabric tend to increase (24-44\% and 9-26\%, respectively) with the incorporation of recycled polyester. This implies that the fabric becomes stiffer and less pliable when recycled polyester fibre is used and thus the virgin and recycled polyester fibres cannot be considered as functionally equivalent for life cycle or other analysis.}, - keywords = {Crystallinity,PET bottles,Polyester fibre,Recycling,Shear rigidity,Tensile properties} -} - -@article{makarchevPlasticConsumptionUrban2022, - title = {Plastic Consumption in Urban Municipalities: {{Characteristics}} and Policy Implications of {{Vietnamese}} Consumers' Plastic Bag Use}, - shorttitle = {Plastic Consumption in Urban Municipalities}, - author = {Makarchev, Nikita and Xiao, Chunwen and Yao, Bohao and Zhang, Yunlan and Tao, Xin and Le, Duy Anh}, - year = {2022}, - month = oct, - journal = {Environmental Science \& Policy}, - volume = {136}, - pages = {665--674}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.07.015}, - urldate = {2022-08-11}, - abstract = {Plastic waste pollution remains a major problem across the developing world. In Vietnam, the situation is particularly serious as many plastic consumption behaviours remain under-analysed and pertinent policies have produced limited impact. Accordingly, this paper examines the patterns and predictors of consumer plastic bag use when shopping in Da Nang, Vietnam. It does so by drawing on an original household survey and key informant interviews. Moreover, it applies the latest behavioural theory research and machine learning techniques. Subsequently, this paper observes Vietnamese consumers' plastic bag use is prevalent and often entrenched as a habit. Additionally, two socio-demographic and seven socio-psychological predictors are significant to the frequency of using plastic bags. These results, then, inform Vietnam's plastic consumption policies and, more broadly, emphasise the (1) heterogeneity of influences on consumer behaviour; (2) contingency of many widely-accepted behavioural predictors; and (3) shortcomings of purely regulatory solutions.}, - langid = {english}, - keywords = {Developing countries,Machine learning,Plastic bags,Plastic consumption,Policy reform,Sustainability}, - file = {/Users/fabio/Zotero/storage/RWLSWWK2/S1462901122002246.html} -} - -@article{Makela2020, - title = {Machine Vision Estimates the Polyester Content in Recyclable Waste Textiles}, - author = {M{\"a}kel{\"a}, Mikko and Rissanen, Marja and Sixta, Herbert}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {105007}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105007}, - urldate = {2020-06-22}, - file = {/Users/fabio/Zotero/storage/SBPMPSL3/full-text.pdf} -} - -@article{Makenji2009, - title = {Mechanical Methods for Recycling Waste Composites}, - author = {Makenji, Kylash}, - year = {2009}, - journal = {Management, Recycling and Reuse of Waste Composites}, - pages = {217--252}, - doi = {10.1533/9781845697662.3.217}, - abstract = {This chapter discusses the mechanical methods of recycling domestic and industrial composite waste materials. Waste composite materials are complex as many different polymer types exist which can be filled with various types of fillers. The process of mechanical recycling is to collect, sort, size reduce, separate and densify these wastes, economically and effectively. Identification and labelling of these materials aids consumer input to the recycling process. Flotation or hydro-cyclone separation uses densities as a means to separate, issues surrounding the effectiveness of such systems are discussed. Near infrared and electrostatic sorting are effective techniques as individual composites can be identified and segregated. Densification can occur by simple pelletisation or by sophisticated extrusion processing. The techniques are also discussed. \textcopyright{} 2010 Woodhead Publishing Limited All rights reserved.}, - isbn = {9781845694623}, - keywords = {composite,extrusion,fi bre,plastic,separation}, - file = {/Users/fabio/Zotero/storage/LFBUVQ3I/Mechanical methods for recycling waste composites.pdf} -} - -@article{makitieDigitalInnovationContribution2023, - title = {Digital Innovation's Contribution to Sustainability Transitions}, - author = {M{\"a}kitie, Tuukka and Hanson, Jens and Damman, Sigrid and Wardeberg, Mari}, - year = {2023}, - month = may, - journal = {Technology in Society}, - volume = {73}, - pages = {102255}, - issn = {0160-791X}, - doi = {10.1016/j.techsoc.2023.102255}, - urldate = {2023-05-01}, - abstract = {Digital innovation is increasingly mentioned as a potential key contributor to sustainability transitions. However, there has been little theoretical discussion of this topic. In this conceptual paper, the authors draw on literature on both sustainability transition studies and innovation studies to explore critically the contribution of digital innovation in sustainability transitions. They conceptualize transitions as fundamental changes in patterns of production and consumption, such as those relating to energy. Radical innovation leads to changes in the structure of socio-technical systems underlying such patterns, while incremental innovation contributes to maintaining the structure and current patterns. The authors suggest that digital innovations may contribute positively to sustainability transitions through couplings with sustainable innovations. They propose the following typology of such couplings: incremental twin innovations, sustainability supported digital innovations, digitally supported sustainable innovations, and radical twin innovations. Radical twin innovations may possess the greatest potential for sustainability transitions, as they are linked to structural change and thus open new pathways for sustainability transitions, whereas incremental twin innovations merely optimize current unsustainable systems. The typology is illustrated with examples from shipping and from electricity systems, and some of the complexities of twin transitions encountered by researchers and practitioners alike are discussed.}, - langid = {english}, - keywords = {Digitalization,Incremental innovation,Radical innovation,Socio-technical transition,Structural change,Twin transition}, - file = {/Users/fabio/Zotero/storage/W3TLWSJB/Mäkitie et al_2023_Digital innovation's contribution to sustainability transitions.pdf;/Users/fabio/Zotero/storage/7C5J3IV3/S0160791X2300060X.html} -} - -@article{Malek2019, - title = {Interpretive Structural Modelling Based Analysis of Sustainable Manufacturing Enablers}, - author = {Malek, J. and Desai, Tushar N.}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117996}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117996}, - urldate = {2020-03-14}, - abstract = {The manufacturing sector has contributed significantly in building the nation's economy for developing countries like India but it has also created many environmental and societal issues. To deal with these issues, the present study has identified the enablers and modelled their interrelationships in case organization of Indian. The present study has identified 29 enablers of sustainable manufacturing through literature review and opinions of experts. Interpretive Structural Modeling has been utilized to develop a hierarchy structural model which can represent the interrelationships among the enablers. The fuzzy concept has been integrated with Matrix Impact of Cross Multiplication Applied to Classification (MICMAC) technique to calculate the driving/dependence power of the enablers. The present study highlights ``Limitation of traditional processes'' and ``Public pressure'' as the most significant enablers for sustainable manufacturing adoption. The present study discusses a case application of identifying the interrelationships and influence of sustainable manufacturing enablers. The present study provides pivotal references for researchers, practitioners, and policy-makers by exploring the interrelationships and driving/dependence power of the enablers. The findings may encourage the researchers and practitioners to initiate the same studies in other manufacturing organizations by extending the set of enablers and classifying into some more realistic groups.}, - keywords = {Enablers,Fuzzy matrix impact of cross multiplication applie,Interpretive structural modeling,Sustainable manufacturing} -} - -@article{Malek2020, - title = {A Systematic Literature Review to Map Literature Focus of Sustainable Manufacturing}, - author = {Malek, Javed and Desai, Tushar N}, - year = {2020}, - journal = {Journal of Cleaner Production}, - volume = {256}, - pages = {120345}, - publisher = {{Elsevier Ltd}}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2020.120345}, - file = {/Users/fabio/Zotero/storage/KTMSFGJC/A systematic literature review to map literature focus of sustainable manufacturing.pdf} -} - -@article{malekHowHaveWaste2023, - title = {How Have Waste Management Policies Impacted the Flow of Municipal Waste? {{An}} Empirical Analysis of 14 {{European}} Countries}, - shorttitle = {How Have Waste Management Policies Impacted the Flow of Municipal Waste?}, - author = {Malek, Wasim and Mortazavi, Reza and Cialani, Catia and Nordstr{\"o}m, Jonas}, - year = {2023}, - month = jun, - journal = {Waste Management}, - volume = {164}, - pages = {84--93}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.03.040}, - urldate = {2023-05-11}, - abstract = {Waste management policies aim to divert waste from lower positions on the waste hierarchy such as landfill and incineration to higher positions in the hierarchy such as energy recovery and recycling. However, empirical evaluations of such policies are scarce. This study highlighted the effect of waste management policies on the amount of waste treated with landfill, incineration, energy recovery and recycling by analysing a panel dataset consisting of 14 European countries and the period 1996 to 2018. Findings from a seemingly unrelated regression model suggest that the landfill ban is associated with a decrease in landfill waste, but an increase in incineration, energy recovery and recycling waste. The landfill tax is also correlated with an increase in energy recovery waste but, in contrast, it is associated with a reduction in incineration and recycling waste. Meanwhile, the deposit refund scheme is associated with a decrease in the amount of landfill waste. Concerning the effects on total waste generated, regression results from a fixed effects model indicate that the landfill tax and the deposit refund scheme are both correlated with a reduction in the amount of waste generated. These findings contribute to the scarce academic literature evaluating waste management policies and may better inform policy makers on their longer-term implications.}, - langid = {english}, - keywords = {Deposit refund scheme,Deposit return scheme,Incineration tax,Landfill ban,Landfill tax,Waste management}, - file = {/Users/fabio/Zotero/storage/HECU3ITG/Malek et al. - 2023 - How have waste management policies impacted the fl.pdf;/Users/fabio/Zotero/storage/7CHV44I6/S0956053X23002659.html} -} - -@article{Malik2019, - title = {Advancements in {{Input-Output Models}} and {{Indicators}} for {{Consumption-Based Accounting}}}, - author = {Malik, Arunima and McBain, Darian and Wiedmann, Thomas O. and Lenzen, Manfred and Murray, Joy}, - year = {2019}, - month = apr, - journal = {Journal of Industrial Ecology}, - volume = {23}, - number = {2}, - pages = {300--312}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.12771}, - urldate = {2022-02-22}, - abstract = {The use of global, multiregional input-output (MRIO) analysis for consumption-based (footprint) accounting has expanded significantly over the last decade. Most of the global studies on environmental and social impacts associated with consumption or embodied in international trade would have been impossible without the rapid development of extended MRIO databases. We present an overview of the developments in the field of MRIO analysis, in particular as applied to consumption-based environmental and social footprints. We first provide a discussion of research published on various global MRIO databases and the differences between them, before focusing on the virtual laboratory computing infrastructure for potentially making MRIO databases more accessible for collaborative research, and also for supporting greater sectoral and regional detail. We discuss work that includes a broader range of extensions, in particular the inclusion of social indicators in consumption-based accounting. We conclude by discussing the need for the development of detailed nested MRIO tables for investigating linkages between regions of different countries, and the applications of the rapidly growing field of global MRIO analysis for assessing a country's performance toward the United Nations Sustainable Development Goals.}, - keywords = {consumption,industrial ecology,input,output analysis,social footprints,sustainability assessment,virtual laboratory}, - file = {/Users/fabio/Zotero/storage/DF4DEG9Z/Malik et al. - 2019 - Advancements in Input-Output Models and Indicators for Consumption-Based Accounting.pdf} -} - -@article{malingaMappingEcosystemServices2015, - title = {Mapping Ecosystem Services across Scales and Continents-{{A}} Review}, - author = {Malinga, Rebecka and Gordon, Line J and Jewitt, Graham and Lindborg, Regina}, - year = {2015}, - doi = {10.1016/j.ecoser.2015.01.006}, - urldate = {2021-04-20}, - abstract = {Tremendous progress in ecosystem service mapping across the world has moved the concept of ecosystem services forward towards an increasingly useful tool for policy and decision making. There is a pressing need to analyse the various spatial approaches used for the mapping studies. We reviewed ecosystem services mapping literature in respect to spatial scale, world distribution, and types of ecosystem services considered. We found that most world regions were represented among ecosystem service mapping studies and that they included a diverse set of ecosystem services, relatively well distributed across different ecosystem service categories. A majority of the studies were presented at intermediary scales (municipal and provincial level), and 66\% of the studies used a fine resolution of 1 ha or less. The intermediary scale of presentation is important for land use policy and management. The fact that studies are conducted at a fine resolution is important for informing land management practices that mostly takes place at the scale of fields to villages. Ecosystem service mapping could be substantially advanced by more systematic development of cross-case comparisons and methods.}, - keywords = {Land use,Management,Policy,Review,Spatial scale}, - file = {/Users/fabio/Zotero/storage/BDWT3PZX/full-text.pdf} -} - -@article{maliziaTerrestrialEcologistsShould2019, - title = {Terrestrial Ecologists Should Stop Ignoring Plastic Pollution in the {{Anthropocene}} Time}, - author = {Malizia, Agustina and {Monmany-Garzia}, A. Carolina}, - year = {2019}, - month = jun, - journal = {Science of The Total Environment}, - volume = {668}, - pages = {1025--1029}, - issn = {0048-9697}, - doi = {10.1016/j.scitotenv.2019.03.044}, - urldate = {2022-09-01}, - abstract = {The massive production of plastic started in mid 20th century. Today, only 60\,years later and despite its obvious benefits, plastic pollution is ubiquitous, influencing all global environments and the planet's biota, including human-well-being. Plastic pollution may interact with other global change drivers, having large-scale, remote and long-lasting effects. Here we highlight that plastic pollution should be considered a main topic for global change research in the 21st century, especially among terrestrial ecologists at understudied continental regions such as South America.}, - langid = {english}, - keywords = {Driver,Global change,Microplastics,Plastic dynamics,Socio-ecology,Terrestrial plastic sources}, - file = {/Users/fabio/Zotero/storage/Z3SRTN4R/S0048969719310228.html} -} - -@article{Malone2007, - title = {Fab@{{Home}}: The Personal Desktop Fabricator Kit}, - author = {Malone, Evan and Lipson, Hod}, - year = {2007}, - journal = {Rapid Prototyping Journal}, - volume = {13}, - number = {4}, - pages = {245--255}, - issn = {1355-2546}, - doi = {10.1108/13552540710776197}, - urldate = {2013-11-21}, - keywords = {manufacturing systems,paper type research paper,plastics industry,rapid prototypes}, - file = {/Users/fabio/Zotero/storage/2UFBQ34W/Fab@Home the personal desktop fabricator kit.pdf} -} - -@article{maloneManufacturingHumanRobotic, - title = {Manufacturing for {{Human}} and {{Robotic Exploration}}}, - author = {Malone, Evan and Lipson, Hod}, - pages = {1--7}, - file = {/Users/fabio/Zotero/storage/ID4WFAMP/Malone, Lipson - Unknown - Manufacturing for Human and Robotic Exploration.pdf} -} - -@article{Malshe2015, - title = {Profile of {{Sustainability}} in {{Additive Manufacturing}} and {{Environmental Assessment}} of a {{Novel Stereolithography Process}}}, - author = {Malshe, Harsha and Nagarajan, Hari and Pan, Yayue and Haapala, Karl}, - year = {2015}, - journal = {Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing}, - pages = {V002T05A012}, - doi = {10.1115/MSEC2015-9371}, - isbn = {978-0-7918-5683-3}, - keywords = {MSEC2015-9371}, - file = {/Users/fabio/Zotero/storage/LXVCFGIX/Malshe et al. - 2015 - Profile of Sustainability in Additive Manufacturing and Environmental Assessment of a Novel Stereolithography Pro.pdf} -} - -@article{maMicroplasticsAquaticEnvironments2020, - title = {Microplastics in Aquatic Environments: {{Toxicity}} to Trigger Ecological Consequences}, - author = {Ma, Hui and Pu, Shengyan and Liu, Shibin and Bai, Yingchen and Mandal, Sandip and Xing, Baoshan}, - year = {2020}, - month = jun, - journal = {Environmental Pollution}, - volume = {261}, - pages = {114089}, - publisher = {{Elsevier}}, - issn = {0269-7491}, - doi = {10.1016/J.ENVPOL.2020.114089}, - urldate = {2022-01-13}, - abstract = {The prevalence of microplastic debris in aquatic ecosystems as a result of anthropogenic activity has received worldwide attention. Although extensive research has reported ubiquitous and directly adverse effects on organisms, only a few published studies have proposed the long-term ecological consequences. The research in this field still lacks a systematic overview of the toxic effects of microplastics and a coherent understanding of the potential ecological consequences. Here, we draw upon cross-disciplinary scientific research from recent decades to 1) seek to understand the correlation between the responses of organisms to microplastics and the potential ecological disturbances, 2) summarize the potential ecological consequences triggered by microplastics in aquatic environments, and 3) discuss the barriers to the understanding of microplastic toxicology. In this paper, the physiochemical characteristics and dynamic distribution of microplastics were related to the toxicological concerns about microplastic bioavailability and environmental perturbation. The extent of the ecological disturbances depends on how the ecotoxicity of microplastics is transferred and proliferated throughout an aquatic environment. Microplastics are prevalent; they interfere with nutrient productivity and cycling, cause physiological stress in organisms (e.g., behavioral alterations, immune responses, abnormal metabolism, and changes to energy budgets), and threaten the ecosystem composition and stability. By integrating the linkages among the toxicities that range from the erosion of individual species to the defective development of biological communities to the collapse of the ecosystem functioning, this review provides a bottom-up framework for future research to address the mechanisms underlying the toxicity of microplastics in aquatic environments and the substantial ecological consequences.}, - pmid = {32062100}, - keywords = {Aquatic environment,Ecotoxicology,Microplastics,Toxic effects} -} - -@article{managiTechnologyPolicySustainable2021, - title = {Technology Policy for the Sustainable Development Goals: {{From}} the Global to the Local Level}, - author = {Managi, Shunsuke and Lindner, Robert and Stevens, Casey C.}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120410}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120410}, - urldate = {2020-10-28}, - abstract = {Technology policy plays a prominent role in making progress toward the Sustainable Development Goals (SDGs). This special issue addresses the question of how different science, technology and innovation (STI) policies in different localities around the world could promote the greater global good by helping to achieve the SDGs by 2030. In addition, we take a critical look at the challenges posed by the uneven global distribution of innovation and development capacities.}, - keywords = {Innovation,Policy,Science,SDGs,STI,Sustainability,Technology}, - file = {/Users/fabio/Zotero/storage/2WFM7TCF/full-text.pdf} -} - -@article{Mancanares2015, - title = {Sustainable {{Manufacturing Strategies}}: {{A Literature Review}} on {{Additive Manufacturing Approach}}}, - author = {Man{\c c}anares, Cau{\^e} Gon{\c c}alves and Zancul, Eduardo de Senzi and Miguel, Paulo Augusto Cauchick}, - year = {2015}, - journal = {Product Management \& Development}, - volume = {13}, - number = {1}, - pages = {47--56}, - issn = {22375228}, - doi = {10.4322/pmd.2015.001}, - keywords = {3-d printing,additive manufacturing,manufacturing,rapid prototyping,sustainability}, - file = {/Users/fabio/Zotero/storage/YE9EI398/Mançanares, Zancul, Miguel - 2015 - Sustainable Manufacturing Strategies A Literature Review on Additive Manufacturing Approach.pdf} -} - -@article{maneroSystematicLiteratureReview2022, - title = {A Systematic Literature Review of Non-Market Valuation of {{Indigenous}} Peoples' Values: {{Current}} Knowledge, Best-Practice and Framing Questions for Future Research}, - author = {Manero, Ana and Taylor, Kat and Nikolakis, William and Adamowicz, Wiktor and Marshall, Virginia and {Spencer-Cotton}, Alaya and Nguyen, Mai and Grafton, R. Quentin}, - year = {2022}, - month = apr, - journal = {Ecosystem Services}, - volume = {54}, - pages = {101417}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2022.101417}, - urldate = {2022-03-14} -} - -@article{Mangina2020, - title = {Data Analytics for Sustainable Global Supply Chains}, - author = {Mangina, Eleni and Narasimhan, Pranav Kashyap and Saffari, Mohammad and Vlachos, Ilias}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {255}, - pages = {120300}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120300} -} - -@article{manglaOperationalExcellenceImproving2020, - title = {Operational Excellence for Improving Sustainable Supply Chain Performance}, - author = {Mangla, Sachin Kumar and {Kusi-Sarpong}, Simonov and Luthra, Sunil and Bai, Chunguang and Jakhar, Suresh Kumar and Khan, Sharfuddin Ahmed}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105025}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105025}, - urldate = {2020-07-15} -} - -@article{mangnusFuturesLiteracyDiversity2021, - title = {Futures Literacy and the Diversity of the Future}, - author = {Mangnus, Astrid C. and Oomen, Jeroen J. and Vervoort, Joost M. and Hajer, Maarten A.}, - year = {2021}, - month = jun, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102793}, - urldate = {2021-06-24}, - file = {/Users/fabio/Zotero/storage/97K4JTGG/full-text.pdf} -} - -@article{Mani2014, - title = {Sustainability Characterization for Additive Manufacturing}, - author = {Mani, M and Lyons, K W and Gupta, S K}, - year = {2014}, - journal = {Journal of Research of the National Institute of Standards and Technology}, - volume = {119}, - pages = {419--428}, - issn = {2165-7254}, - doi = {10.6028/jres.119.016}, - abstract = {Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.}, - keywords = {Additive manufacturing,Characterization,Performance metrics,Standardization,Sustainability}, - file = {/Users/fabio/Zotero/storage/7A93J6TB/Mani, Lyons, Gupta - 2014 - Sustainability characterization for additive manufacturing.pdf} -} - -@article{Maniruzzaman2012, - title = {A Review of Hot-Melt Extrusion: Process Technology to Pharmaceutical Products.}, - author = {Maniruzzaman, Mohammed and Boateng, Joshua S and Snowden, Martin J and Douroumis, Dennis}, - year = {2012}, - journal = {ISRN pharmaceutics}, - volume = {2012}, - number = {2}, - pages = {436763--436769}, - issn = {2090-6153}, - doi = {10.5402/2012/436763}, - abstract = {Over the last three decades industrial adaptability has allowed hot-melt extrusion (HME) to gain wide acceptance and has already established its place in the broad spectrum of manufacturing operations and pharmaceutical research developments. HME has already been demonstrated as a robust, novel technique to make solid dispersions in order to provide time controlled, modified, extended, and targeted drug delivery resulting in improved bioavailability as well as taste masking of bitter active pharmaceutical ingredients (APIs). This paper reviews the innumerable benefits of HME, based on a holistic perspective of the equipment, processing technologies to the materials, novel formulation design and developments, and its varied applications in oral drug delivery systems.}, - isbn = {2090-6153 (Electronic) 2090-6145 (Linking)}, - pmid = {23326686}, - file = {/Users/fabio/Zotero/storage/DFD8U4PJ/A review of hot-melt extrusion process technology to pharmaceutical products.pdf} -} - -@article{manleyReviewMachineLearning2022, - title = {A Review of Machine Learning and Big Data Applications in Addressing Ecosystem Service Research Gaps}, - author = {Manley, Kyle and Nyelele, Charity and Egoh, Benis N.}, - year = {2022}, - month = oct, - journal = {Ecosystem Services}, - volume = {57}, - pages = {101478}, - issn = {2212-0416}, - doi = {10.1016/j.ecoser.2022.101478}, - urldate = {2022-09-18}, - abstract = {Ecosystem services are essential for human well-being, but are currently facing many natural and anthropogenic threats. Modeling and mapping ecosystem services helps us mitigate, adapt to, and manage these pressures, but overall the field faces multiple major limitations. These include: 1) data availability, 2) understanding, estimation, and reporting of uncertainties, and 3) connecting socio-ecological aspects of ecosystem services. Recent technological advancements in machine learning coupled with rising availability of big data, offer an opportunity to overcome these challenges. We review studies utilizing machine learning and/or big data to overcome these limitations. We collect 56 papers that exemplify the current use of machine learning and big data to address the three identified gaps in the ecosystem service field. We find that although the use of these tools in ecosystem service research is relatively new, it is growing quickly. Big data can directly address data gaps, especially as new big data resources relevant to ecosystem service mapping become available (ex. social media data). Some properties of machine learning can also contribute to addressing data gaps in data sparse environments. Also, many machine learning algorithms can estimate and consider uncertainty, whereas big data can significantly increase sample size, reducing uncertainties in some situations. Some big data sources, like crowdsourced data, provide direct sources of social behaviors and preferences that relate to ecosystem service demand, thus allowing researchers to connect social and biophysical aspects of ecosystem services. Machine learning algorithms provide an effective and efficient tool for handling these large nonlinear socio-ecological datasets in tandem, giving researchers the ability to more realistically model and map ecosystem services without relying on oversimplified proxies or linear algorithms. Despite these opportunities, implementation is still lacking and limitations still hinder use.}, - langid = {english}, - keywords = {Big data,Ecosystem services,Machine learning,Modeling,Nature's contribution to people,Socio-ecological systems,Uncertainty}, - file = {/Users/fabio/Zotero/storage/HRTKYPHQ/Manley et al_2022_A review of machine learning and big data applications in addressing ecosystem.pdf;/Users/fabio/Zotero/storage/QCJA4LI7/S2212041622000742.html} -} - -@article{manopiniwesStochasticOptimisationModel2017, - title = {Stochastic Optimisation Model for Integrated Decisions on Relief Supply Chains: Preparedness for Disaster Response}, - shorttitle = {Stochastic Optimisation Model for Integrated Decisions on Relief Supply Chains}, - author = {Manopiniwes, Wapee and Irohara, Takashi}, - year = {2017}, - month = feb, - journal = {International Journal of Production Research}, - volume = {55}, - number = {4}, - pages = {979--996}, - publisher = {{Taylor \& Francis}}, - issn = {0020-7543}, - doi = {10.1080/00207543.2016.1211340}, - urldate = {2023-06-08}, - abstract = {This paper proposes a stochastic linear mixed-integer programming model for integrated decisions in the preparedness and response stages in pre- and post-disaster operations, respectively. We develop a model for integrated decisions that considers three key areas of emergency logistics: facility and stock prepositioning, evacuation planning and relief vehicle planning. To develop a framework for effective relief operations, we consider not only a cost-based but also an equity-based solution approach in our multiple objectives model. Then a normalised weighted sum method is used to parameterise our multiple objective programming model. This paper suggests a compromise between the cost, and the equity of relief victims. The experiments also demonstrate how time restrictions and the availability of relief vehicles impact the two objective functions.}, - keywords = {humanitarian logistics,multi-objective programming,optimisation,stochastic programming,supply chain management}, - file = {/Users/fabio/Zotero/storage/JI763CMP/Manopiniwes_Irohara_2017_Stochastic optimisation model for integrated decisions on relief supply chains.pdf} -} - -@article{mansurNatureFuturesUrban2022, - ids = {mansur2022}, - title = {Nature Futures for the Urban Century: {{Integrating}} Multiple Values into Urban Management}, - author = {Mansur, Andressa V. and McDonald, Robert I. and G{\"u}neralp, Burak and Kim, HyeJin and {de Oliveira}, Jose A. Puppim and Callaghan, Corey T. and Hamel, Perrine and Kuiper, Jan J. and Wolff, Manuel and Liebelt, Veronika and Martins, In{\^e}s S. and Elmqvist, Thomas and Pereira, Henrique M.}, - year = {2022}, - month = may, - journal = {Environmental Science \& Policy}, - volume = {131}, - pages = {46--56}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.01.013}, - urldate = {2022-02-09}, - file = {/Users/fabio/Zotero/storage/QGWN49PV/full-text.pdf} -} - -@article{manzaSociologyBeginners2023, - title = {Sociology for {{Beginners}}}, - author = {Manza, Jeff}, - year = {2023}, - journal = {Annual Review of Sociology}, - volume = {49}, - number = {1}, - pages = {241--261}, - doi = {10.1146/annurev-soc-030420-124148}, - urldate = {2023-08-31}, - abstract = {This article examines the teaching of the introductory course in sociology. The first section sets the context of the teaching of introductory sociology in American higher education. The second turns to an examination of the written materials of introductory sociology: the textbooks used in the vast majority of these courses. Their widespread use provides a window into how introductory sociology has evolved over time. These texts also provide a view of what certain stakeholders\textemdash publishers and a select group of authors\textemdash have taken as central for beginners to master. The third section considers the scholarship on teaching and learning (SOTL) literature in sociology, which has produced research on current pedagogical practices and on strategies, techniques, ideas, and solutions to problems that contemporary introductory instructors face. A short conclusion offers a reflection on the implications of these issues for the future of teaching in the discipline.}, - keywords = {history of sociology,introductory sociology,sociological pedagogy}, - file = {/Users/fabio/Zotero/storage/VEDPGXMG/Manza_2023_Sociology for Beginners.pdf} -} - -@article{maOptimizationLandUse2021, - title = {Optimization of Land Use Structure to Balance Economic Benefits and Ecosystem Services under Uncertainties: {{A}} Case Study in {{Wuhan}}, {{China}}}, - author = {Ma, Shuhua and Wen, Zhuzhu}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {311}, - pages = {127537}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127537}, - urldate = {2021-06-10} -} - -@article{maoRecyclingWasteClassification2021, - title = {Recycling Waste Classification Using Optimized Convolutional Neural Network}, - author = {Mao, Wei Lung and Chen, Wei Chun and Wang, Chien Tsung and Lin, Yu Hao}, - year = {2021}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {164}, - pages = {105132}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105132}, - urldate = {2020-09-12}, - abstract = {An automatic classification robot based on effective image recognition could help reduce huge labors of recycling tasks. Convolutional neural network (CNN) model, such as DenseNet121, improved the traditional image recognition technology and was the currently dominant approach to image recognition. A famous benchmark dataset, i.e., TrashNet, comprised of a total of 2527 images with six different waste categories was used to evaluate the CNNs' performance. To enhance the accuracy of waste classification driven by CNNs, the data augmentation method could be adopted to do so, but fine-tuning optimally hyper-parameters of CNN's fully-connected-layer was never used. Therefore, besides data augmentation, this study aims to utilize a genetic algorithm (GA) to optimize the fully-connected-layer of DenseNet121 for improving the classification accuracy of DenseNet121 on TrashNet and proposes the optimized DenseNet121. The results show that the optimized DenseNet121 achieved the highest accuracy of 99.6\%, when compared with other studies' CNNs. The data augmentation could perform higher efficiency on accuracy improvement of image classification than optimizing fully-connected-layer of DenseNet121 for TrashNet. To replace the function of the original classifier of DenseNet121 with fully-connected-layer can improve DenseNet121's performance. The optimized DenseNet121 further improved the accuracy and demonstrated the efficiency of using GA to optimize the neuron number and the dropout rate of fully-connected-layer. Gradient-weighted class activation mapping helped highlight the coarse features of the waste image and provide additional insight into the explainability of optimized DenseNet121.}, - keywords = {Convolutional neural network (CNN),DenseNet,Genetic algorithm (GA),Image recognition,Recycling,Waste classification}, - file = {/Users/fabio/Zotero/storage/ENUJMTR9/full-text.pdf} -} - -@article{mapleyDevelopmentValidationLowcost2020, - title = {Development and {{Validation}} of a {{Low-cost Polymer Selective Laser Sintering Machine}}}, - author = {Mapley, Martin and Lu, Yidi and Gregory, Shaun D. and Pauls, Jo and Tansley, Geoff and Busch, Andrew}, - year = {2020}, - month = jun, - journal = {HardwareX}, - volume = {8}, - pages = {e00119}, - publisher = {{Elsevier BV}}, - issn = {24680672}, - doi = {10.1016/j.ohx.2020.e00119}, - urldate = {2020-07-14} -} - -@article{Marazzi2020, - title = {Consumer-Based Actions to Reduce Plastic Pollution in Rivers: {{A}} Multi-Criteria Decision Analysis Approach}, - author = {Marazzi, Luca and Loiselle, Steven and Anderson, Lucy G. and Rocliffe, Stephen and Winton, Debbie J.}, - year = {2020}, - month = aug, - journal = {PLoS ONE}, - volume = {15}, - number = {8 August}, - pages = {e0236410}, - publisher = {{Public Library of Science}}, - issn = {19326203}, - doi = {10.1371/journal.pone.0236410}, - urldate = {2021-07-20}, - abstract = {The use and management of single use plastics is a major area of concern for the public, regulatory and business worlds. Focusing on the most commonly occurring consumer plastic items present in European freshwater environments, we identified and evaluated consumer-based actions with respect to their direct or indirect potential to reduce macroplastic pollution in freshwater environments. As the main end users of these items, concerned consumers are faced with a bewildering array of choices to reduce their plastics footprint, notably through recycling or using reusable items. Using a Multi-Criteria Decision Analysis approach, we explored the effectiveness of 27 plastic reduction actions with respect to their feasibility, economic impacts, environmental impacts, unintended social/environmental impacts, potential scale of change and evidence of impact. The top ranked consumer-based actions were identified as: using wooden or reusable cutlery; switching to reusable water bottles; using wooden or reusable stirrers; using plastic free cotton-buds; and using refill detergent/ shampoo bottles. We examined the feasibility of top-ranked actions using a SWOT analysis (Strengths, Weaknesses, Opportunities and Threats) to explore the complexities inherent in their implementation for consumers, businesses, and government to reduce the presence of plastic in the environment.}, - pmid = {32797095}, - keywords = {Decision analysis,Environmental impacts,Finance,Freshwater environments,Pollution,Rivers,Sustainability science,Water pollution}, - file = {/Users/fabio/Zotero/storage/24675XRG/full-text.pdf} -} - -@article{Marche2018, - title = {From Product Design to Supply Chain Design : {{Which}} Methodologies for the Upstream Stages of Innovation ? {{Brunelle Marche To}} Cite This Version : {{HAL Id}} : Tel-01946850 Soutenance et Mis \`a Disposition de l ' Ensemble de La {{Contact}} : Ddoc-Theses-Contact@univ-}, - author = {Marche, Brunelle}, - year = {2018}, - file = {/Users/fabio/Zotero/storage/X58KYCPA/These Brunelle.pdf} -} - -@article{Marchelli2011, - title = {The Guide to Glass {{3D}} Printing: Developments, Methods, Diagnostics and Results}, - author = {Marchelli, Grant and Prabhakar, Renuka and Storti, Duane and Ganter, Mark}, - editor = {Bourell, Dave}, - year = {2011}, - month = apr, - journal = {Rapid Prototyping Journal}, - volume = {17}, - number = {3}, - pages = {187--194}, - issn = {1355-2546}, - doi = {10.1108/13552541111124761}, - abstract = {Purpose ? This purpose of this paper is to provide an overview of the steps and processes behind successfully adapting novel materials, namely virgin glass and recycled glass, to three?dimensional printing (3DP).Design/methodology/approach ? The transition from 3DP ceramic systems to glass systems will be examined in detail, including the necessary modifications to binder systems and printing parameters. The authors present preliminary engineering data on shrinkage, porosity, and density as functions of peak firing temperature, and provide a brief introduction to the complexities faced in realizing an adequate and repeatable firing method for 3D printed glass.Findings ? Shrinkage behavior for the 3D printed recycled glass showed significant anisotropy, especially beyond peak firing temperatures of 730\textdegree C. The average shrinkage ratios for the slow? and fast?axes to the Z?axis were 1:1.37 and 1:2.74, respectively. These extreme differences can be attributed to the layer?by?layer production method and binder burn?off. At 760\textdegree C, the apparent porosity reached a minimum of 0.36 percent, indicative of asymptotic behavior that approaches a fully dense 3DP glass specimen. At low firing temperatures, the bulk density was similar to water, but increased to a maximum of 2.41?g/cm3. This indicates that 3DP recycled glass can behave similarly to common glass with accepted published bulk densities ranging from 2.4?2.8?g/cm3.Research limitations/implications ? Heating schedule analysis and optimization may reduce geometric variations, therefore, the firing method should be investigated in greater depth.Originality/value ? This paper provides a guide to successfully adopting glass to commercially available 3DP hardware. This research has also enabled rapid prototyping of recycled glass, a monumental step towards a sustainable future for 3DP.}, - isbn = {1355-2546}, - keywords = {ceramics,glass,mechanical properties of materials,paper type research paper,rapid prototypes,recycling}, - file = {/Users/fabio/Zotero/storage/2576X67D/Marchelli et al. - 2011 - The guide to glass 3D printing developments, methods, diagnostics and results.pdf} -} - -@article{marcheQualitativeSustainabilityAssessment2022, - ids = {marche2022}, - title = {Qualitative Sustainability Assessment of Road Verge Management in {{France}}: {{An}} Approach from Causal Diagrams to Seize the Importance of Impact Pathways}, - shorttitle = {Qualitative Sustainability Assessment of Road Verge Management in {{France}}}, - author = {Marche, Brunelle and Camargo, Mauricio and Bautista Rodriguez, Sandra Cecilia and Chaudron, Cl{\'e}mence and Mayer, Fr{\'e}d{\'e}rique and Bachmann, Christophe}, - year = {2022}, - month = nov, - journal = {Environmental Impact Assessment Review}, - volume = {97}, - pages = {106911}, - issn = {01959255}, - doi = {10.1016/j.eiar.2022.106911}, - urldate = {2023-01-08}, - abstract = {A road verge, also known as a roadside, is a strip of grass or vegetation, sometimes shrubs and trees, that forms a space on the public property located along a road or highway. They require regular maintenance, one of the most relevant reasons being the safety of road users, which implies for territory planners making decisions about the period of maintenance, frequency, the mowing height, or whether or not remove cut biomass from the roadside among others. As highlighted in previous studies, the maintenance strategy decided on has a range of positive and negative impacts on the ecosystem services provided by road verges. Today, however, there is a lack of a formal and holistic view of how these maintenance practices affect the ecosystem services (ES) provided by the roadside. In order to improve the sustainability management of these areas, this paper proposes to use the concept of causal diagrams from the systems theory and literature analysis. This concept helps to structure and represent the impact of road verge maintenance decisions on ES and their interrelationships through causal networks. Nine interrelated causal diagrams were then developed. These diagrams are the first attempt at a qualitative assessment of the impact of roadside management on ES. This work is the first step towards a formal holistic model to assess the sustainability impacts of road verges and the development of decision-making tools.}, - langid = {english}, - keywords = {Causal diagrams,Ecosystem services,Road verge management,Sustainability assessment}, - file = {/Users/fabio/Zotero/storage/QZSWJ3BZ/Marche et al. - 2022 - Qualitative sustainability assessment of road verg.pdf;/Users/fabio/Zotero/storage/ND86DLCU/S0195925522001779.html} -} - -@inproceedings{Maria2016, - title = {Additive {{Manufacturing}} as an Opportunity for Supporting Sustainability through Implementation of Circular Economies}, - author = {Maria, Cecilia and Politecnico, Angioletti and Milano, Di and Giovanni, Francesco and Politecnico, Sisca and Taisch, Marco and Di Milano, Politecnico}, - year = {2016}, - keywords = {additive manufacturing,circular economy,smart manufacturing,sustainable manufacturing}, - file = {/Users/fabio/Zotero/storage/3NVPAXXZ/Additive Manufacturing as an opportunity for supporting sustainability through implementation of circular economies.pdf} -} - -@book{Maria2019, - title = {Sustainability on {{University Campuses}}: {{Learning}}, {{Skills Building}} and {{Best Practices}}}, - author = {Maria, Ana and Moreira, Maniero and G{\"u}nther, Wanda M Risso}, - year = {2019}, - doi = {10.1007/978-3-030-15864-4}, - isbn = {978-3-030-15863-7}, - keywords = {healthcare waste,sustainability,{Sustainability,University,Waste management,Healthc},university,waste management}, - file = {/Users/fabio/Zotero/storage/9BP6CFTV/Sustainability on learning campuses.pdf} -} - -@article{Mariani2019, - title = {Industry 4.0: {{A}} Bibliometric Review of Its Managerial Intellectual Structure and Potential Evolution in the Service Industries}, - author = {Mariani, Marcello and Borghi, Matteo}, - year = {2019}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {149}, - pages = {119752}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119752} -} - -@article{marianiArtificialIntelligenceInnovation2022, - title = {Artificial Intelligence in Innovation Research: {{A}} Systematic Review, Conceptual Framework, and Future Research Directions}, - shorttitle = {Artificial Intelligence in Innovation Research}, - author = {Mariani, Marcello M. and Machado, Isa and Magrelli, Vittoria and Dwivedi, Yogesh K.}, - year = {2022}, - month = sep, - journal = {Technovation}, - pages = {102623}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2022.102623}, - urldate = {2022-09-18}, - abstract = {Artificial Intelligence (AI) is increasingly adopted by organizations to innovate, and this is ever more reflected in scholarly work. To illustrate, assess and map research at the intersection of AI and innovation, we performed a Systematic Literature Review (SLR) of published work indexed in the Clarivate Web of Science (WOS) and Elsevier Scopus databases (the final sample includes 1448 articles). A bibliometric analysis was deployed to map the focal field in terms of dominant topics and their evolution over time. By deploying keyword co-occurrences, and bibliographic coupling techniques, we generate insights on the literature at the intersection of AI and innovation research. We leverage the SLR findings to provide an updated synopsis of extant scientific work on the focal research area and to develop an interpretive framework which sheds light on the drivers and outcomes of AI adoption for innovation. We identify economic, technological, and social factors of AI adoption in firms willing to innovate. We also uncover firms' economic, competitive and organizational, and innovation factors as key outcomes of AI deployment. We conclude this paper by developing an agenda for future research.}, - langid = {english}, - keywords = {Artificial intelligence,Bibliometric analysis,Innovation,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/N5TWS8UJ/Mariani et al_2022_Artificial intelligence in innovation research.pdf;/Users/fabio/Zotero/storage/QETDQU8W/S0166497222001705.html} -} - -@article{maricaRamanTechnologyApplication2022, - title = {Raman Technology Application for Plastic Waste Management Aligned with {{FAIR}} Principle to Support the Forthcoming Plastic and Environment Initiatives}, - author = {Marica, Ioana and Aluaș, Mihaela and C{\^i}nt{\u a} P{\^i}nzaru, Simona}, - year = {2022}, - month = may, - journal = {Waste Management}, - volume = {144}, - pages = {479--489}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.04.021}, - urldate = {2022-05-23} -} - -@article{marinakisEmergencePeaceEngineering2021, - title = {The Emergence of Peace Engineering and Innovation}, - author = {Marinakis, Y. and Harvey, H.A. and Walsh, S.T.}, - year = {2021}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {170}, - pages = {120867}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120867}, - urldate = {2021-06-10} -} - -@article{marionFirstStepsMelting2023, - title = {First Steps of the Melting of an Amorphous Polymer through a Hot-End of a Material Extrusion Additive Manufacturing}, - author = {Marion, S. and Sardo, L. and Joffre, T. and Pigeonneau, F.}, - year = {2023}, - month = mar, - journal = {Additive Manufacturing}, - volume = {65}, - pages = {103435}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2023.103435}, - urldate = {2023-02-12}, - abstract = {The melting of an amorphous polymer filament through the hot end of a material extrusion process is addressed using computational multiphase fluid dynamics coupled to heat transfer. Only the flow through the heat block is investigated. The air gap between the filament and the interior of the extruder is accounted for. The polymer/air interface is implicitly tracked by a level-set method. The system of equations is solved using a finite element method with a time-marching method. Three extrusion velocities are investigated. For the lowest velocity, after the contact of the polymer with the extruder on the nozzle, the air gap disappears with time. The transient regime lasts a few tens of seconds. For the two larger velocities, even if the air gap is more and more reduced with time, it persists for a long time. The extension of the air gap increases with the velocity. The feeding force needed to push the filament is obtained by the integration of the tension on the surface of the extruder. After a transient regime driven by the heat transfer, a steady-state regime is observed for the three velocities. Roughly, the feeding force increases linearly with the extrusion velocity. A good agreement is found with experimental results for the two smallest velocities.}, - langid = {english}, - keywords = {Finite element analysis,Heat transfer,Level-set method,Material extrusion,Melting,Polymer}, - file = {/Users/fabio/Zotero/storage/J7LQJKP9/Marion et al_2023_First steps of the melting of an amorphous polymer through a hot-end of a.pdf;/Users/fabio/Zotero/storage/6FD8JZ3X/S2214860423000489.html} -} - -@article{marisMechanicalRecyclingCompatibilization2018, - title = {Mechanical Recycling: {{Compatibilization}} of Mixed Thermoplastic Wastes}, - shorttitle = {Mechanical Recycling}, - author = {Maris, Joachim and Bourdon, Sylvie and Brossard, Jean-Michel and Cauret, Laurent and Fontaine, Laurent and Montembault, V{\'e}ronique}, - year = {2018}, - month = jan, - journal = {Polymer Degradation and Stability}, - volume = {147}, - pages = {245--266}, - issn = {0141-3910}, - doi = {10.1016/j.polymdegradstab.2017.11.001}, - urldate = {2023-08-31}, - abstract = {Plastics have numerous properties that render them superior to other materials in many applications. Since the past 50 years, the use of plastics has dramatically increased in our daily lives. However, household refuse and industrial disposal of plastic materials is a major environmental concern. Because of legal requirements, which have been enforced to protect the environment, there is a pressing need to develop methods to recycle plastic waste. Mechanical recycling has emerged as the most economical, as well as the most energetic and ecologically efficient option. After introducing the mechanical recycling concept, this review will focus on the strategies that have been used for compatibilization of blends of mixed thermoplastic waste.}, - keywords = {Compatibilization,Mechanical recycling,Mixed plastic wastes,Stability,Thermoplastic}, - file = {/Users/fabio/Zotero/storage/2HPFUVSB/Maris et al_2018_Mechanical recycling.pdf;/Users/fabio/Zotero/storage/9SYLDTTA/S0141391017303373.html} -} - -@article{markardSustainabilityTransitionsEmerging2012, - title = {Sustainability Transitions: {{An}} Emerging Field of Research and Its Prospects}, - author = {Markard, Jochen and Raven, Rob and Truffer, Bernhard}, - year = {2012}, - month = jul, - journal = {Research Policy}, - volume = {41}, - number = {6}, - pages = {955--967}, - issn = {00487333}, - doi = {10.1016/j.respol.2012.02.013}, - urldate = {2022-03-13}, - abstract = {Sustainability oriented innovation and technology studies have received increasing attention over the past 10-15 years. In particular, a new field dealing with "sustainability transitions" has gained ground and reached an output of 60-100 academic papers per year. In this article, we aim to identify the intellectual contours of this emerging field by conducting a review of basic conceptual frameworks, together with bibliographical analysis of 540 journal articles in the field. It is against this background that we position the six papers assembled in a special section in Research Policy. These papers pave the way for new conceptual developments and serve as stepping-stones in the maturation of sustainability transition studies, by linking with the scholarly literatures of management studies, sociology, policy studies, economic geography, and modeling. \textcopyright{} 2012 Elsevier B.V. All rights reserved.}, - keywords = {Innovation studies,Literature review,Sustainability} -} - -@article{Markopoulos2000, - title = {{{LivingLab}}: {{A}} White Paper}, - author = {Markopoulos, P and Rauterberg, Gwm}, - year = {2000}, - journal = {IPO Annual Progress Report}, - pages = {53--65} -} - -@article{Markopoulos2001, - title = {Towards a {{Living Lab}} Research Facility and a Ubiquitous Computing Research Programme}, - author = {Markopoulos, Panos}, - year = {2001}, - journal = {The CHI2001 workshop Distributed and Disappearing UI's in Ubiquitous Computing}, - pages = {3--4} -} - -@article{Markou2017, - title = {A Methodological Proposal to Link {{Design}} with {{Additive Manufacturing}} to Environmental Considerations in the {{Early Design Stages}}}, - author = {Markou, Foteini and Segonds, Fr{\'e}d{\'e}ric and Rio, Maud and Perry, Nicolas}, - year = {2017}, - journal = {International Journal on Interactive Design and Manufacturing}, - volume = {11}, - number = {4}, - pages = {799--812}, - publisher = {{Springer Paris}}, - issn = {19552505}, - doi = {10.1007/s12008-017-0412-1}, - abstract = {Additive manufacturing is an innovative manu-facturing process that enables rapid manufacturing of func-tional products and parts. On the other side, considering environmental aspects in design is beneficial as it leads to lower costs, improved product quality, new business oppor-tunities. Thus, in order to foster the potential of AM in product innovation and product manufacturing in the light of environmental concerns, a new design method is necessary. This paper proposes a method in the context of Design with Additive Manufacturing, to take into account the specifici-ties of this manufacturing process in a Design to Environment approach. The method is focused on the Early Design Stages (EDS) of the product development process, which are cru-cial not only for choices regarding the product characteristics but also for the environmental parameters that need to be taken into consideration. The implementation of the proposed method in creativity session of the EDS underlined the need for dedicated supports in terms of environmental decisions. More and specifically the need for providing tools to capital-ize the decisions made focusing on each Life Cycle Stage of the product was identified as a requirement for this support.}, - isbn = {19552513 (ISSN)}, - keywords = {Design to environment,Design with Additive Manufacturing,Eco-design,Life cycle models}, - file = {/Users/fabio/Zotero/storage/7H89ZMXI/a methodological proposal to link design with additive manufacturing to environmental considerations in the early design stages.pdf} -} - -@article{Markovic2019, - title = {Identifying and Ranking Novel Indicators of {{MSMEs}} Innovation Potential}, - author = {Markovi{\'c}, Du{\v s}an and Jana{\'c}kovi{\'c}, Goran and Simeunovi{\'c}, Nenad and Lali{\'c}, Bojan}, - year = {2019}, - month = oct, - pages = {1--13}, - issn = {0953-7325}, - doi = {10.1080/09537325.2019.1675871} -} - -@article{marraMultidimensionalSpaceMap2022, - title = {A Multi-Dimensional Space to Map National Research Communities in the Circular Economy: {{Any}} Common Pattern?}, - author = {Marra, Alessandro and Mazzocchitti, Marialisa and Sarra, Alessandro}, - year = {2022}, - month = jun, - journal = {Environmental Science \& Policy}, - volume = {132}, - pages = {48--59}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.02.003}, - urldate = {2022-03-13}, - abstract = {Whenever the policy challenges to address ask for a strong scientific background, decision makers depend on the underlying research activities. One of the fields in which research is able to affect the design and implementation of policies is given by the Circular Economy (CE). Our purpose in this paper is to understand how scholars carry out their research in the CE to realize whether a common pattern emerge and identify implications for policy. We provide a systematic investigation of the world's ten largest national research communities (NRCs) to highlight differences and similarities and understand the underlying patterns of research. We refer to eight key dimensions, which are mostly original ones and, therefore, represent elements of novelty of the paper: internationality, interdisciplinarity, specialization, relevance of local issues, policy implications, provision of case studies, research focus and research method. A dataset with 3027 CE-related research publications that range from 2001 to 2018 has been used for the elaborations. Results show some similarities and differences: everywhere, the empirical method prevails over the theoretical, and research is mostly focused on the micro-level of analysis (e.g., consumers and firms), while national research communities differ with respect to the openness to international collaborations, the degree with which some specific disciplines contribute to research in the field of CE, and the consideration of local issues provide.}, - keywords = {Circular economy,Comparative analysis,Knowledge base,Research} -} - -@article{martensChallengesImplementationInternet2021, - title = {Challenges in the Implementation of Internet of Things Projects and Actions to Overcome Them}, - author = {Martens, Cristina Dai Pr{\'a} and da Silva, Luciano Ferreira and Silva, Deivison Feitosa and Martens, Mauro Luiz}, - year = {2021}, - month = nov, - journal = {Technovation}, - pages = {102427}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2021.102427}, - urldate = {2021-12-10} -} - -@article{Martin-Alfonso2015, - title = {Influence of Polymer Reprocessing Cycles on the Microstructure and Rheological Behavior of Polypropylene/Mineral Oil Oleogels}, - author = {{Mart{\'i}n-Alfonso}, J.E. and Franco, J.M.}, - year = {2015}, - journal = {Polymer Testing}, - volume = {45}, - pages = {12--19}, - publisher = {{Elsevier Ltd}}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2015.04.016}, - abstract = {The overall objective of this work was to study the effect of reprocessing cycles of isotactic polypropylene (PP) on the rheological behavior and microstructure of gel-like dispersions in mineral oil. PP was subjected to 10 reprocessing cycles and oleogel samples were further prepared by using the mixing rheometry technique and characterized from a rheological point of view and polarized light optical microscopy (PLOM). Recycled polymer samples were also characterized by means of rheological measurements, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate the property changes induced by reprocessing. The values of different linear viscoelastic functions (elastic modulus and complex viscosity) of recycled PP decrease with the number of reprocessing cycles, which influences oleogel rheological response. An empirical exponential correlation between the storage modulus (G{${'}$}) of PP samples and the plateau modulus (GNo) of oleogels has been proposed to predict the rheological behavior of oleogels. Results were explained considering the scission of PP chains induced by the thermomechanical reprocessing treatment applied.}, - keywords = {Degradation,Mineral oil,Oleogels,Polypropylene,Reprocessing,Viscoelastic properties}, - file = {/Users/fabio/Zotero/storage/Y2K7H2V6/Influence of polymer reprocessing cycles on the microstructure and rheological behavior of polypropylenemineral oil oleogels.pdf} -} - -@article{martin-ortegaLinkingEcosystemChanges2021, - title = {Linking Ecosystem Changes to Their Social Outcomes: {{Lost}} in Translation}, - author = {{Martin-Ortega}, Julia and Young, Dylan M. and Glenk, Klaus and Baird, Andy J. and Jones, Laurence and Rowe, Edwin C. and Evans, Chris D. and Dallimer, Martin and Reed, Mark S.}, - year = {2021}, - month = aug, - journal = {Ecosystem Services}, - volume = {50}, - pages = {101327}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101327}, - urldate = {2021-07-05} -} - -@article{Martin2001, - title = {Poly(Lactic Acid): Plasticization and Properties of Biodegradable Multiphase Systems}, - author = {Martin, O and Av{\'e}rous, L}, - year = {2001}, - month = jun, - journal = {Polymer}, - volume = {42}, - number = {14}, - pages = {6209--6219}, - issn = {00323861}, - doi = {10.1016/S0032-3861(01)00086-6}, - urldate = {2014-09-23}, - keywords = {lactic acid,plasticizer,poly,thermoplastic starch}, - file = {/Users/fabio/Zotero/storage/XPTWRAEC/Martin, Avérous - 2001 - Poly(lactic acid) plasticization and properties of biodegradable multiphase systems.pdf} -} - -@article{Martin2021, - title = {Life Cycle Comparative Assessment of Pet Bottle Waste Management Options: {{A}} Case Study for the City of {{Bauru}}, {{Brazil}}}, - author = {Martin, Eduardo J.P. and Oliveira, Deborah S.B.L. and Oliveira, Luiza S.B.L. and Bezerra, Barbara S.}, - year = {2021}, - month = jan, - journal = {Waste Management}, - volume = {119}, - pages = {226--234}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.08.041}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/ULR6IMYR/full-text.pdf} -} - -@article{martinez-bravoTradeoffsUrbanSustainability2019, - title = {Trade-Offs among Urban Sustainability, Pollution and Livability in {{European}} Cities}, - author = {{Mart{\'i}nez-Bravo}, Mar{\'i}a del Mar and {Mart{\'i}nez-del-R{\'i}o}, Javier and {Antol{\'i}n-L{\'o}pez}, Raquel}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {224}, - pages = {651--660}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.110}, - urldate = {2020-06-18}, - abstract = {This paper aims to explore the interactions between urban sustainability, urban pollution and city livability. Specifically, we propose a theoretical model that explains how the three pillars of urban sustainability (economic, environmental, and social) and urban pollution interact and simultaneously affect city livability. These relationships are tested using a structural equation model (SEM) in a sample of responses from 40,798 citizens in 79 European cities and secondary data on urban pollution. Overall, our findings show that although urban economic sustainability is positively associated with urban pollution, it is indirectly negatively associated with urban pollution via urban environmental sustainability and positively associated with city livability via urban social sustainability. In addition, we found that urban social sustainability is positively associated with city livability, while urban pollution is negatively related to city livability. Therefore, our results advance the knowledge on the interplay and trade-offs between the pillars of urban sustainability and their impact on city livability.}, - keywords = {City livability,Sustainable city,Urban pollution,Urban sustainability} -} - -@article{Martinez-Hernandez2017, - title = {Trends in Sustainable Process Design\textemdash from Molecular to Global Scales}, - author = {{Martinez-Hernandez}, Elias}, - year = {2017}, - month = aug, - journal = {Current Opinion in Chemical Engineering}, - volume = {17}, - pages = {35--41}, - issn = {22113398}, - doi = {10.1016/j.coche.2017.05.005}, - urldate = {2020-11-02}, - abstract = {The quest for sustainability is changing how chemical engineers conceptualise new processes. The task also becomes more complicated by economic and social uncertainties, local diversity of renewable resources and globalisation. These realities are changing the nature of process design problems and recent advancements have been able to incorporate the multidimensionality and multiscale boundaries by exploiting the power of mathematical methods, decision support frameworks and insight based methods. In doing so, two main trends for methods development can be distinguished, the ones considering expanded boundaries for design from the lowest molecular level to the process level, and the ones from process to the higher levels of value chains, ecosystems and the planet. However, a truly integrated framework that captures the full range of scales and interactions from molecular to planetary levels is yet to be developed to be able to find superior designs that perhaps we had never thought of before.}, - file = {/Users/fabio/Zotero/storage/VHLQBCX2/full-text.pdf} -} - -@article{Martinez2012, - title = {Comparison of Aged Polyamide Powders for Selective Laser Sintering}, - author = {Mart{\'i}nez, A. and Ib{\'a}{\~n}ez, A. and S{\'a}nchez, A. and Le{\'o}n, M. A.}, - year = {2012}, - journal = {AIP Conference Proceedings}, - volume = {1431}, - number = {1}, - pages = {5--13}, - issn = {0094243X}, - doi = {10.1063/1.4707544}, - abstract = {Selective Laser Sintering (SLS) is an additive manufacturing technology in which a three-dimensional object is manufactured layer by layer by melting powder materials with heat generated from a CO2 laser. However, a disadvantage of sintered materials is that the unsintered powder material during the process can be reused only a limited number of cycles, as during the heating phase in the sintering chamber the material remains at a temperature near the fusion point for a certain period of time and lose properties. This work shows the study of two polyamides (PA12)-based powders used in SLS with the aim of understanding the modification of their properties mainly with the temperature and the time at which they are exposed during the processing. \textcopyright{} 2012 American Institute of Physics.}, - isbn = {9780735410176}, - keywords = {ageing materials,melt flow index,polyamide,rheology,Selective Laser Sintering}, - file = {/Users/fabio/Zotero/storage/FBNBSLFS/Comparison of aged polyamide powders for selective laser sintering.pdf} -} - -@article{Martinez2017, - title = {{{I3Mote}}: {{An}} Open Development Platform for the Intelligent Industrial Internet}, - author = {Martinez, Borja and Vilajosana, Xavier and Kim, Il and Zhou, Jianwei and {Tuset-Peir{\'o}}, Pere and Xhafa, Ariton and Poissonnier, Dominique and Lu, Xiaolin}, - year = {2017}, - month = apr, - journal = {Sensors}, - volume = {17}, - number = {5}, - pages = {986}, - issn = {1424-8220}, - doi = {10.3390/s17050986} -} - -@article{martinezFaithFutureMission2020, - title = {Faith in the Future: {{On}} a Mission to Integrate Sustainability into Management Theory and Practice}, - author = {Martinez, Fabien and Peattie, Ken and {Vazquez-Brust}, Diego}, - year = {2020}, - month = oct, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102654}, - urldate = {2020-10-28} -} - -@article{martinezJournalThatHal2023, - title = {The {{Journal}} That {{Hal Built}}: {{TF}}\&{{SC}}'s Founding Editor and Early Authors Laid Foundations for a Discipline and a Premier Journal}, - shorttitle = {The {{Journal}} That {{Hal Built}}}, - author = {Martinez, John and Phillips, Fred and Walsh, Steve}, - year = {2023}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {193}, - pages = {122610}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122610}, - urldate = {2023-05-11}, - abstract = {Founded in 1969 by Dr. Harold ``Hal'' Linstone and re-named in 1970, Technological Forecasting \& Social Change is one of the oldest journals in the field of technology/innovation management. Today TF\&SC is the field's highest-cited journal, and the one with the highest Institute for Scientific Information (ISI) rating. Dr. Linstone and his circle provided the foundation for a 21st century elite academic journal. We use early materials from Dr. Linstone's private files, and early papers published in TF\&SC, to trace the origins of the journal and to investigate the evolution of its focus. We find that the original focuses of the journal are still relevant today, though the set of tools used has evolved and must continue to evolve. The article fills gaps left by the recent bibliographic studies of the journal's development.}, - langid = {english}, - keywords = {Academic journal,Intellectual history,Management of Technology,Social change,Technology forecasting/foresight}, - file = {/Users/fabio/Zotero/storage/A8EYH5YY/Martinez et al. - 2023 - The Journal that Hal Built TF&SC's founding edito.pdf;/Users/fabio/Zotero/storage/P58UASXS/S0040162523002950.html} -} - -@article{MartinezMoreno2019, - title = {La Innovaci\'on Social, \textquestiondown pr\'acticas Para Producir Autonom\'ia, Empoderamiento y Nueva Institucionalidad?}, - author = {Mart{\'i}nez Moreno, Rub{\'e}n and Cruz Gallach, Helena and Blanco, Ismael and Salazar, Yunailis}, - year = {2019}, - journal = {Revista Internacional de Sociolog\'ia}, - volume = {77}, - number = {2}, - pages = {126}, - issn = {0034-9712}, - doi = {10.3989/ris.2019.77.2.17.022}, - abstract = {A partir del an\'alisis del caso de Catalu\~na, este art\'iculo contribuye al debate en torno a la innovaci\'on social, ofreciendo una visi\'on general sobre el desarrollo de las pr\'acticas socialmente innovadoras y pregunt\'andose por su potencial transformador en tres dimensiones: 1) la creaci\'on de espacios de autonom\'ia social; 2) el empoderamiento ciudadano (particularmente de colectivos y en territorios de especial vulnerabilidad social), y 3) el desarrollo de nuevas arquitecturas institucionales que promuevan y refuercen los derechos sociales y de ciudadan\'ia. El art\'iculo parte de una extensa investigaci\'on que ha combinado el mapeo de la innovaci\'on social, una encuesta online y distintas entrevistas semi-estructuradas con informantes clave. En el art\'iculo se muestran las potencialidades y los l\'imites de la innovaci\'on social como factor de transformaci\'on social y se se\~nala, asimismo, la necesidad de crear las condiciones institucionales propicias para su generalizaci\'on y su consolidaci\'on.}, - isbn = {0000000176309}, - keywords = {Barrios,Crisis,Empoderamiento,Empowerment,Innovaci\'on social,Neighbourhoods,Social innovation}, - file = {/Users/fabio/Zotero/storage/2UENP9RC/La innovación social, ¿prácticas para producir autonomía, empoderamiento y nueva institucionalidad.pdf} -} - -@article{Martins2002, - title = {Polypropylene Compounding with Post-Consumer Material: {{II}}. {{Reprocessing}}}, - author = {Martins, Milene Heloisa and De Paoli, Marco Aurelio}, - year = {2002}, - journal = {Polymer Degradation and Stability}, - volume = {78}, - number = {3}, - pages = {491--495}, - issn = {01413910}, - doi = {10.1016/S0141-3910(02)00195-7}, - abstract = {We have investigated extrusion moulding for 13 processing cycles, using formulations containing virgin polypropylene and 1:1 mixtures of virgin and post-consumer polypropylene containing, or not, the antioxidant Recyclostab 411???. The main effect of reprocessing for polypropylene was the decrease of molar mass due to degradation with chain scission, which was detected by the melt flow rate and the increase in crystallinity. Antioxidant consumption and material stability reduction with processing cycles were observed by the reduction of the thermo-oxidative stability detected by oxidative induction time measurements. The addition of antioxidants minimized degradation and maintained the stability of the material. ?? 2002 Elsevier Science Ltd. All rights reserved.}, - pmid = {13}, - keywords = {Polypropylene,Post-consumer plastics,Recycling,Reprocessing,Thermoplastics}, - file = {/Users/fabio/Zotero/storage/VZBYVKWF/Polypropylene compounding with post-consumer material II. Reprocessing.pdf} -} - -@article{martosSuccessfulEnvironmentalPerformance2016, - title = {Towards Successful Environmental Performance of Sustainable Cities: {{Intervening}} Sectors. {{A}} Review}, - author = {Martos, A. and {Pacheco-Torres}, R. and Ord{\'o}{\~n}ez, J. and {Jadraque-Gago}, E.}, - year = {2016}, - month = may, - journal = {Renewable and Sustainable Energy Reviews}, - volume = {57}, - pages = {479--495}, - publisher = {{Pergamon}}, - issn = {1364-0321}, - doi = {10.1016/J.RSER.2015.12.095}, - urldate = {2021-08-02}, - abstract = {Cities contribute around 80\% of global greenhouse gas emissions. There is currently a massive growth in urban areas internationally, especially in developing countries. Urban centers and cities should offer an effective answer to new problems arising from planning and expansion, according to criteria of sustainability. Decisions for sustainable cities planning and management should be taken on an evaluation of their consequences. Correspondingly, each strategy should be designed and undertaken with the right tools of study, analysis and prediction. This paper aims to offer an analysis of the aspects involved in designing sustainable cities. It involves an overview of published papers focusing on urban transport, building energy consumption, green areas planning, waste management and water supply on a city-wide scale. In order to give a broader concept of sustainability in cities, an analysis of other variables from a social point of view is also given. The discussion of this research reflects that the adoption of mechanisms to promote sustainable development is a matter not only of decision makers and designers, but also of users and citizens.}, - keywords = {Sustainability,Sustainable cities,Urban planning} -} - -@article{Maruccia2020a, - title = {Evidence from {{Network Analysis}} Application to {{Innovation Systems}} and {{Quintuple Helix}}}, - author = {Maruccia, Ylenia and Solazzo, Gianluca and Del Vecchio, Pasquale and Passiante, Giuseppina and Vecchio, Pasquale Del and Passiante, Giuseppina}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120306}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120306}, - urldate = {2020-09-18}, - abstract = {The debate on innovation systems has recently been improved through the development of more dynamic and forward-looking approaches. Scholars and researchers have started to reserve attention for System Dynamics, a widely used methodology for modelling complex socioeconomic systems. Moreover, recent innovation models such as the Quintuple Helix framework call for an effort for better understanding and forecasting relationships among ecology, knowledge and innovation, deeply analysing synergies among economy, society, and democracy. This paper focuses on the relationships between the Quintuple Helix and System Dynamics modelling from a quantitative perspective. It discusses how the application of Network Analysis metrics advances the understanding of an innovation system mapped with a Quintuple Helix model. Using Global Innovation Index, a Casual Loop Diagram has been designed representing the process of knowledge generation and innovation dissemination within the Quintuple Helix model. Identification of structural features within Causal Loop Diagrams through Network Analysis is likely to provide new insights into the emergent properties of an innovation system seen as a complex system. Meanwhile, analysing central drivers has the potential to identify leverage points. Results obtained show the benefits of coupling Network Analysis with System Dynamics modelling and valuable evidence of relationships among helices.}, - keywords = {Centrality metrics,Helix,Innovation systems,Network analysis,Quintuple,Quintuple Helix,System dynamics}, - file = {/Users/fabio/Zotero/storage/FB57Z25G/Maruccia et al. - 2020 - Evidence from Network Analysis application to Innovation Systems and Quintuple Helix.pdf} -} - -@article{Masanet2007, - title = {Assessing the Benefits of Design for Recycling for Plastics in Electronics: {{A}} Case Study of Computer Enclosures}, - author = {Masanet, Eric and Horvath, Arpad}, - year = {2007}, - journal = {Materials and Design}, - volume = {28}, - number = {6}, - pages = {1801--1811}, - issn = {18734197}, - doi = {10.1016/j.matdes.2006.04.022}, - abstract = {With the emergence of extended producer responsibility regulations for electronic devices, it is becoming increasingly important for electronics manufacturers to apply design for recycling (DFR) methods in the design of plastic enclosures. This paper presents an analytical framework for quantifying the environmental and economic benefits of DFR for plastic computer enclosures during the design process, using straightforward metrics that can be aligned with corporate environmental and financial performance goals. The analytical framework is demonstrated via a case study of a generic desktop computer enclosure design, which is recycled using a typical US "take-back" system for plastics from waste electronics. The case study illustrates how the analytical framework can be used by the enclosure designer to quantify the environmental and economic benefits of two important DFR strategies: choosing high-value resins and minimizing enclosure disassembly time. Uncertainty analysis is performed to quantify the uncertainty surrounding economic conditions in the future when the enclosure is ultimately recycled. ?? 2006 Elsevier Ltd. All rights reserved.}, - isbn = {0261-3069}, - keywords = {Performance indices (H),Recycling (C),Thermoplastics (A)}, - file = {/Users/fabio/Zotero/storage/YB9PJDUR/Masanet, Horvath - 2007 - Assessing the benefits of design for recycling for plastics in electronics A case study of computer enclosures.pdf} -} - -@article{Mascio2019, - title = {Sentiment Indices and Their Forecasting Ability}, - author = {Mascio, David A. and Fabozzi, Frank J.}, - year = {2019}, - month = feb, - journal = {Journal of Forecasting}, - issn = {02776693}, - doi = {10.1002/for.2571} -} - -@article{Masood2004, - title = {Development of New Metal/Polymer Materials for Rapid Tooling Using {{Fused}} Deposition Modelling}, - author = {Masood, S.H and Song, W.Q}, - year = {2004}, - month = oct, - journal = {Materials \& Design}, - volume = {25}, - number = {7}, - pages = {587--594}, - issn = {02613069}, - doi = {10.1016/j.matdes.2004.02.009}, - urldate = {2015-01-22}, - isbn = {6139214505}, - keywords = {composite material,direct rapid tooling,fused deposition modelling,injection moulding,rapid prototyping,tensile strength}, - file = {/Users/fabio/Zotero/storage/BD3ZKZ8F/Masood, Song - 2004 - Development of new metalpolymer materials for rapid tooling using Fused deposition modelling.pdf} -} - -@book{Masood2014b, - title = {Advances in {{Fused Deposition Modeling}}}, - author = {Masood, S. H.}, - year = {2014}, - journal = {Comprehensive Materials Processing}, - volume = {10}, - publisher = {{Elsevier}}, - doi = {10.1016/B978-0-08-096532-1.01002-5}, - abstract = {Fused deposition modeling (FDM) is one of the most widely used additive manufacturing processes for fabricating prototypes and functional parts in common engineering plastics. The process is based on the extrusion of heated feedstock plastic filaments through a nozzle tip to deposit layers onto a platform to build parts layer by layer directly from a digital model of the part. The simplicity, reliability, and affordability of the FDM process have made the additive manufacturing technology widely recognized and adopted by industry, academia, and consumers. The FDM process has also been widely used by research and development sectors to improve the process, develop new materials, and apply the FDM systems in a wide range of engineering applications. This chapter describes an overview of the basic process, materials, and capabilities of the Stratasys FDM technology, and also presents a comprehensive review of research and development work undertaken using the FDM process since its inception over the past two decades. \textcopyright{} 2014 Elsevier Ltd All rights reserved.}, - isbn = {978-0-08-096533-8}, - keywords = {FDM systems,Fused deposition modeling,Insight software,Materials,Part quality,Thermoplastics}, - file = {/Users/fabio/Zotero/storage/NSSRKFFW/Advances in Fused Deposition Modeling.pdf} -} - -@article{massonUrbanClimatesClimate2020, - title = {Urban {{Climates}} and {{Climate Change}}}, - author = {Masson, Val{\'e}ry and Lemonsu, Aude and Hidalgo, Julia and Voogt, James}, - year = {2020}, - month = oct, - journal = {Annual Review of Environment and Resources}, - volume = {45}, - number = {1}, - publisher = {{Annual Reviews}}, - issn = {1543-5938}, - doi = {10.1146/annurev-environ-012320-083623}, - urldate = {2020-10-28}, - abstract = {Cities are particularly vulnerable to extreme weather episodes, which are expected to increase with climate change. Cities also influence their own local climate, for example, through the relative warming known as the urban heat island (UHI) effect. This review discusses urban climate features (even in complex terrain) and processes. We then present state-of-the-art methodologies on the generalization of a common urban neighborhood classification for UHI studies, as well as recent developments in observation systems and crowdsourcing approaches. We discuss new modeling paradigms pertinent to climate impact studies, with a focus on building energetics and urban vegetation. In combination with regional climate modeling, new methods benefit the variety of climate scenarios and models to provide pertinent information at urban scale. Finally, this article presents how recent research in urban climatology contributes to the global agenda on cities and climate change.Expected final online publication date for the Annual Review of Environment and Resources, Volume 45 is October 19, 2020. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.}, - keywords = {climate change in cities,climate downscaling,urban climate,urban climate modeling,urban heat island,urban planning for climate adaptation}, - file = {/Users/fabio/Zotero/storage/GRR8TV23/full-text.pdf} -} - -@article{MaterialFlowAnalysis2022, - ids = {lase2022}, - title = {Material Flow Analysis and Recycling Performance of an Improved Mechanical Recycling Process for Post-Consumer Flexible Plastics}, - year = {2022}, - month = nov, - journal = {Waste Management}, - volume = {153}, - pages = {249--263}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.09.002}, - urldate = {2022-09-22}, - abstract = {Increasing the recycling rates for post-consumer flexible plastics (PCFP) waste is imperative as PCFP is considered a difficult-to-recycle waste with \ldots}, - langid = {english}, - keywords = {Flexible plastics,Material flow analysis,Mechanical recycling,Performance indicators,Waste management}, - file = {/Users/fabio/Zotero/storage/TSYHIRQV/Lase et al_2022_Material flow analysis and recycling performance of an improved mechanical.pdf;/Users/fabio/Zotero/storage/DCDZYYQK/S0956053X22004470.html} -} - -@article{materialsTensilePropertiesPlastics2014, - title = {Tensile {{Properties}} of {{Plastics}} 1}, - author = {Materials, Plate and Materials, Electrical Insulating and Specimens, Plastics}, - year = {2014}, - pages = {1--16}, - doi = {10.1520/D0638-10}, - file = {/Users/fabio/Zotero/storage/7TNF8NCN/Tensile Properties of Plastics 1.pdf} -} - -@article{Mathai2021, - title = {The {{Political Economy}} of ({{Un}}){{Sustainable Production}} and {{Consumption}}: {{A Multidisciplinary Synthesis}} for {{Research}} and {{Action}}}, - author = {Mathai, Manu V. and Isenhour, Cindy and Stevis, Dimitris and Vergragt, Philip and Bengtsson, Magnus and Lorek, Sylvia and Mortensen, Lars Fogh and Coscieme, Luca and Scott, David and Waheed, Ambreen and Alfredsson, Eva}, - year = {2021}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {167}, - pages = {105265}, - publisher = {{Elsevier B.V.}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105265}, - urldate = {2021-03-17}, - keywords = {Environmental governance,Environmental justice,Global inequality,Political economy,Power,Sustainable consumption and production}, - file = {/Users/fabio/Zotero/storage/LTZGJEDP/Mathai et al. - 2020 - The Political Economy of (Un)Sustainable Production and Consumption A Multidisciplinary Synthesis for Research an.pdf} -} - -@article{Mathiyazhagan2019, - title = {Challenges for Implementing Green Concept in Sustainable Manufacturing: A Systematic Review}, - author = {Mathiyazhagan, Kaliyan and Sengupta, Somak and Mathivathanan, Deepak}, - year = {2019}, - journal = {Opsearch}, - volume = {56}, - number = {1}, - pages = {32--72}, - publisher = {{Springer India}}, - issn = {09750320}, - doi = {10.1007/s12597-019-00359-2}, - abstract = {Global warming and the environmental problems arising from it are posing a serious threat to the peaceful co-existence of the human and the natural worlds. The drastic depletion of fossil fuels, in particular, has made it imperative that we find alternative ways of manufacturing that can support upcoming industries without causing further loss or damage to our natural resources. This critical situation has given rise to a pressing need for a cohesive and strategic research that can address the needs of industries while simultaneously ensuring the implementation of environmentally sustainable manufacturing methods. However, the adoption of environmentally sustainable concepts is a challenging task for industries and a thorough, comprehensive and insightful research is essential in order to support and facilitate this task. From the literature available, it can be assumed with certainty that industries are currently making substantial efforts to ensure that their manufacturing-related operations are as green and as sustainable as possible. The literature review contained in this paper endeavours to assess, from a global perspective, the various challenges that hinder these efforts while bearing in mind the positive trend in industrial operations. It may also be worth noting that there are not much research so far on green concept in sustainable manufacturing and this paper adds value to the existing research by focusing on this hitherto neglected area.}, - keywords = {Challenging factors,Evaluation,Green,Review,Sustainable development}, - file = {/Users/fabio/Zotero/storage/FDW4N7CL/Challenges for implementing green concept in sustainable manufacturing a systematic review.pdf} -} - -@article{Matos2019, - title = {Additive Manufacturing Technology: Mapping Social Impacts}, - author = {Matos, Florinda and Jacinto, Celeste}, - year = {2019}, - month = jan, - journal = {Journal of Manufacturing Technology Management}, - volume = {30}, - number = {1}, - pages = {70--97}, - issn = {1741-038X}, - doi = {10.1108/JMTM-12-2017-0263}, - abstract = {Purpose \textendash{} Recent developments in additive manufacturing (AM) technology have emphasized the issue of social impacts. However, such effects are still to be determined. So, the purpose of this paper is to map the social impacts of AM technology. Design/methodology/approach \textendash{} The methodological approach applied in this study combines a literature review with computer-aided content analysis to search for keywords related to social impacts. The content analysis technique was used to identify and count the relevant keywords in academic documents associated with AM social impacts. Findings \textendash{} The study found that AM technology social impacts are still in an exploratory phase. Evidence was found that several social challenges of AM technology will have an influence on the society. The topics associated with fabrication, customization, sustainability, business models and work emerged as the most relevant terms that can act as ``pointers'' to social impacts. Research limitations/implications \textendash{} The research on this subject is strongly conditioned by the scarcity of empirical experience and, consequently, by the scarcity of data and publications on the topic. Originality/value \textendash{} This study gives an up-to-date contribution to the topic of AM social impacts, which is still little explored in the literature. Moreover, the methodological approach used in this work combines bibliometrics with computer-aided content analysis, which also constitutes a contribution to support future literature reviews in any field. Overall, the results can be used to improve academic research in the topic and promote discussion among the different social actors}, - keywords = {Additive manufacturing,Customization,Manufacturing competences,Organizational change,Work organization}, - file = {/Users/fabio/Zotero/storage/BAZP35PP/Additive Manufacturing technology mapping social impacts.pdf} -} - -@article{matosComparativeAnalysisMicro2023, - title = {Comparative Analysis of Micro Level Indicators for Evaluating the Progress towards a Circular Economy}, - author = {Matos, Joana and Martins, Carla and Sim{\~o}es, Carla L. and Simoes, Ricardo}, - year = {2023}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {39}, - pages = {521--533}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.06.002}, - urldate = {2023-06-15}, - abstract = {With the transition from a linear to a more circular economic model, tools are required to monitor the effect of adopted changes, and to assist in further decision-making along time. Within this context, circularity micro-indicators have been proposed by many authors as a fairly simple tool to measure progress towards a more circular economy, at the product or company level. However, these circularity micro-indicators do not follow a standard, vary widely in complexity and approach, and some of them are extremely narrow focused on only a few aspects of the entire product life cycle, hampering their practical adoption by companies. Based on existing literature on categorization and assessment of micro-level indicators, we have further explored a large number of indicators, identifying common features, and highlighting particularly relevant correlations between indicators as we cross-reference different classification schemes. We further assessed their characteristics to assist companies in selecting which micro-indicators to adopt in different stages of their product development processes. Results show an unbalance towards indicators focused on environmental and economic dimensions compared to the social dimension, with indicators that incorporate multiple dimensions associated only to end-of-life management and remanufacturing. We conclude also that most indicators that tackle more than a single dimension of sustainability require collecting external data, and that the measure of circularity for a significant number of them is dependent on external conditions (market and legislation) that go beyond the decisions and strategy of the company. This study will further help in the understanding of the practical application of the micro-indicators as well as their adoption by industry, which will promote the transition to a more circular economy.}, - langid = {english}, - keywords = {Circular economy,Circularity,Micro indicators,Sustainability assessment}, - file = {/Users/fabio/Zotero/storage/GTK73LZL/Matos et al. - 2023 - Comparative analysis of micro level indicators for.pdf;/Users/fabio/Zotero/storage/PRBY64F3/S2352550923001343.html} -} - -@article{Matschoss2020, - title = {Forward-Looking Network Analysis of Ongoing Sustainability Transitions}, - author = {Matschoss, Kaisa and Repo, Petteri}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - number = {August}, - pages = {120288}, - publisher = {{Elsevier}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120288}, - urldate = {2020-09-13}, - abstract = {Experimentation with novel technologies mobilises resources and constructs expectations for systemic transition, yet there is limited research that examines large numbers of energy experiments. Our approach explores an idea of a patchwork of niches and contributes to transitions literature by looking beyond individual experiments. The analysis in this article identifies four clusters of sustainable energy networks (i.e. patchworks of niches), highlighting the roles of urban prosumption, rural production, small towns as integrators, and electric transport in the technological change in the Finnish energy system. The recognition of interconnections between technologies, settings and uses envisages the future scope of patchworks of regimes, and thereby provides an empirically founded, forward-looking knowledge base for political planning and development of social learning. The network analysis of the experiments was executed using Gephi visualisation and exploration software with a specific focus on energy technologies, energy sources, sites, forms of energy use and locality. A large Finnish database on sustainable energy experiments was used to identify and network connections between the core characteristics of such experiments.}, - keywords = {Data visualisation,Energy experiments,Expectations,Network analysis,Patchwork of niches,Social learning}, - file = {/Users/fabio/Zotero/storage/NBX5DPX7/full-text.pdf} -} - -@article{Matsumoto2016a, - title = {Trends and Research Challenges in Remanufacturing}, - author = {Matsumoto, Mitsutaka and Yang, Shanshan and Martinsen, Kristian and Kainuma, Yasutaka}, - year = {2016}, - journal = {International Journal of Precision Engineering and Manufacturing-Green Technology}, - volume = {3}, - number = {1}, - pages = {129--142}, - issn = {2288-6206}, - doi = {10.1007/s40684-016-0016-4}, - abstract = {Remanufacturing is one of the critical elements moving our economy toward one that is circular. Today, remanufacturing is attracting growing attention worldwide. Meanwhile, despite its potential in terms of its effects on both environment and economy, remanufacturing has not yet been sufficiently exploited. This indicates that there exist both drivers for and barriers to an increase in remanufacturing in economies. Although there are both technological and non-technological requirements for remanufacturing, R\&D is unavoidable for its promotion. This article outlines trends, drivers, and barriers for remanufacturing, and presents reviews of studies on selected topics in remanufacturing. The selected R\&D topics in this article are product design for remanufacturing, additive manufacturing for remanufacturing, operations management in remanufacturing, and business models for remanufacturing.}, - isbn = {4068401600164}, - keywords = {additive manufacturing,and barriers to an,been sufficiently exploited,business model,design for remanufacturing,despite its potential in,economy,exist both drivers for,growing attention worldwide,increase in,meanwhile,on both environment and,operation management,our economy toward one,remanufacturing,remanufacturing has not yet,remanufacturing is attracting,remanufacturing is one of,terms of its effects,that is circular,the critical elements moving,this indicates that there,today} -} - -@article{Matsuzaki2019, - title = {Multi-Material Additive Manufacturing of Polymers and Metals Using Fused Filament Fabrication and Electroforming}, - author = {Matsuzaki, Ryosuke and Kanatani, Takuya and Todoroki, Akira}, - year = {2019}, - month = oct, - journal = {Additive Manufacturing}, - volume = {29}, - pages = {100812}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100812} -} - -@article{Matt2015, - ids = {Matt2015a}, - title = {Trends towards {{Distributed Manufacturing Systems}} and {{Modern Forms}} for Their {{Design}}}, - author = {Matt, Dominik T. and Rauch, Erwin and Dallasega, Patrick}, - year = {2015}, - journal = {Procedia CIRP}, - volume = {33}, - pages = {185--190}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2015.06.034}, - abstract = {In the future, long-established paradigms of production will still have to continue to change in order to meet the demand for even more individuality, customer-specific product variants and shortest delivery times within the meaning of the term ``production on demand''. Therefore, in the future, the concept of the Distributed Manufacturing by geographically distributed production systems plays an increasingly important role. New and innovative ways of organizing production operations will be needed. Particularly due to the increasingly loud request for a sustainable and ecologically production and distribution decentralized manufacturing systems are an ideal approach, because the production takes place closer to the customer. It needs modern organizational models for small, flexible and scalable production units in decentralized production networks, which take into account the local and individual customer needs and produce as possible locally. This paper presents the drivers for the trend towards decentralized and distributed manufacturing systems. In addition, the paper gives a complete overview of traditional and modern forms of geographically distributed production and the prospect of new and partly visionary development directions. The paper examines the range of the concept of Distributed Manufacturing starting from standardized factories to visionary generative manufacturing units according the concept of Cloud-Production.}, - isbn = {2212-8271}, - keywords = {Cloud Production,Distributed Manufacturing,Mass Customization}, - file = {/Users/fabio/Zotero/storage/QREN7CLZ/Trends towards Distributed Manufacturing Systems and Modern Forms for their Design.pdf} -} - -@article{Matthews2020, - title = {Against Consensus: {{Embracing}} the Disunity of Personality Theory}, - author = {Matthews, Gerald}, - year = {2020}, - month = jan, - journal = {Personality and Individual Differences}, - volume = {152}, - pages = {109535}, - issn = {01918869}, - doi = {10.1016/j.paid.2019.109535} -} - -@article{matthewsReviewEuropeanUnion2020, - title = {A {{Review}} on {{European Union}}'s {{Strategy}} for {{Plastics}} in a {{Circular Economy}} and Its {{Impact}} on {{Food Safety}}}, - author = {Matthews, Chris and Moran, Fintan and Jaiswal, Amit K.}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {283}, - pages = {125263}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125263}, - urldate = {2020-12-14}, - file = {/Users/fabio/Zotero/storage/B7QXN77T/full-text.pdf} -} - -@article{matustikWhatFootprintConceptual2021, - title = {What Is a Footprint? {{A}} Conceptual Analysis of Environmental Footprint Indicators}, - shorttitle = {What Is a Footprint?}, - author = {Matu{\v s}t{\'i}k, Jan and Ko{\v c}{\'i}, Vladim{\'i}r}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {285}, - pages = {124833}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2020.124833}, - urldate = {2022-10-22}, - abstract = {To describe and measure the apparent pressures humanity poses to functioning of the crucial Earth systems, scientists have long strived to develop comprehensive indicators, of which environmental footprints are probably the most popularly recognized and employed. Since the inception of environmental footprint accounting in the 1990s, the concept has evolved to comprise, next to the ecological footprint, many other environmental and socio-economic issues. However, there is not yet a generally accepted definition of what (environmental) footprints are and how should they be calculated. Thus, most people have only a vague idea of what the footprint results entail, which seems to hold for the scientific community as well. This paper sets to critically overview the various methodological approaches to the most eminent footprinting methodologies, and to conceptually analyze the, often opposing, views on what footprint indicators are or should be; thus providing a key to current footprint research literature and debates. Starting with the ecological footprint, it is shown how footprints started and evolved, but also how the original concept is heavily criticized. The carbon footprint is the most well-known indicator; however, it is also the one where the chaos is most apparent, with a multitude of differing definitions and approaches. The evolution, as well as the debate of the opposing views and methodologies are described regarding water footprint. Also, other evolving concepts, such as land or material footprints are analyzed, as well as how environmental footprints are grouped to a Footprint Family. Then, the general environmental footprint concept is analyzed, regarding the most eminent debates and opposition to life cycle assessment. Finally, the relationship of footprints to the planetary boundaries concept is analyzed.}, - langid = {english}, - keywords = {Carbon footprint,Ecological footprint,Environmental footprint accounting (EFA),Life cycle assessment (LCA),Planetary boundaries,Water footprint}, - file = {/Users/fabio/Zotero/storage/CUYZ46PN/Matuštík y Kočí - 2021 - What is a footprint A conceptual analysis of envi.pdf;/Users/fabio/Zotero/storage/EVGAGL62/S0959652620348770.html} -} - -@article{Mauksch2020, - title = {Who Is an Expert for Foresight? {{A}} Review of Identification Methods}, - author = {Mauksch, Stefanie and {von der Gracht}, Heiko A. and Gordon, Theodore J}, - year = {2020}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {154}, - number = {February 2019}, - pages = {119982}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119982}, - keywords = {expert identi fi cation}, - file = {/Users/fabio/Zotero/storage/3ELGLQVD/Who is an expert for foresight A review of identification method.pdf} -} - -@article{Mazutis2019, - title = {The {{Five I Model}} of {{Sustainability Leadership}}: {{Lessons}} from the {{Zibi One Planet Living}} Sustainable Urban Development}, - author = {Mazutis, D. and Abolina, E.}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117799}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117799}, - urldate = {2020-05-21}, - abstract = {In this paper, we explore the role of leadership in advancing sustainable and resilient construction and development projects. In contrast to leadership theories that focus on individual differences in leadership styles or competencies, we explore what leaders actually do to promote sustainable construction within a complex, multi-stakeholder context. Using the Zibi Development in Canada's capital as a case study, we uncover five specific leadership tasks required to drive more sustainable urban transformations: inspirational work, integrative work, identity work, implementation work and institutional work. Our primary contribution is therefore the development of the 5I model of sustainability leadership, grounded in practice, which describes the hard work of leadership required for One Planet Living.}, - keywords = {Leadership,One planet living,Sustainable construction,Sustainable urban development,Zibi} -} - -@article{mazutisBusinessAcceleratingSustainable2022, - title = {The Business of Accelerating Sustainable Urban Development: {{A}} Systematic Review and Synthesis}, - author = {Mazutis, Daina and Sweet, Lauren}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {357}, - pages = {131871}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131871}, - urldate = {2022-05-23} -} - -@article{mcavoyCombiningLifeCycle2021, - title = {Combining {{Life Cycle Assessment}} and {{System Dynamics}} to Improve Impact Assessment: {{A}} Systematic Review}, - author = {McAvoy, S. and Grant, T. and Smith, C. and Bontinck, P.}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {315}, - pages = {128060}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128060}, - urldate = {2021-07-05}, - abstract = {{$<$}p{$>$}Life cycle assessment has been widely applied to quantify the environmental impacts of products and processes; however recent studies highlight its limitations. Critics state that environmental impacts may be misrepresented if spatial and temporal dynamics of production systems are not accounted for. Some authors have used systems thinking methods to account for the temporal dynamics of production systems in life cycle assessment. These applications have been in the areas of solar electricity, wastewater management, electric vehicles, fly ash in cement, mobile phone waste, steel, and the long-term impacts of material sourcing amongst others. The approaches to combining systems thinking methods with life cycle assessment have been both qualitative and quantitative. Some studies have conceptualised the dynamics of systems using causal loop diagrams. They are a systems thinking tool used to map cause and effect as feedback loops that control system behaviours, nurturing a qualitative understanding of the system under study. Over sixty percent of the studies identified in this review have proceeded to using a rigorous mathematical evaluation of the system, namely, a system dynamics model in combination with life cycle assessment. This paper conducts a systematic review of efforts to combine systems thinking methods with life cycle assessment (in their various forms). In particular, it focuses on the two main approaches to combining system dynamics models and life cycle assessment: the inclusion of life cycle inventory and impact assessment factors in a system dynamics model and the inclusion of system dynamics model results in a life cycle assessment. The advantages and disadvantages of these two approaches will be discussed in this paper to provide guidance for future work.{$<$}/p{$>$}} -} - -@article{McCOY2005, - title = {Linking the {{Physical Work Environment}} to {{Creative Context}}}, - author = {McCOY, JANETTA MITCHELL}, - year = {2005}, - journal = {The Journal of Creative Behavior}, - volume = {39}, - number = {3}, - pages = {167--189}, - issn = {00220175}, - doi = {10.1002/j.2162-6057.2005.tb01257.x}, - abstract = {Creative achievement of teams is increasingly recognized as an organization's most valuable production. With dramatically advancing technology producing an almost unlimited amount of available information, the crucial challenge to many corpo- rate and government organizations is how to use that informa- tion most creatively. While little expense is spared on identifying and training teams to enhance their potential for creative achievement, little is known about how, or if, the physical designed environment of these organizations supports creative achievement of teams. This review of literature across the dis- ciplines of creativity, organizational behavior, and environment and behavior studies advocates a position for the physical environment in the context of creativity. Creative team charac- teristics and social influences are linked to properties and attributes of the physical office environment.}, - isbn = {0022-0175} -} - -@article{McCullough2011, - title = {Recycling Intentions among Youth Baseball Spectators}, - author = {McCullough, Brian P. and Cunningham, George B.}, - year = {2011}, - journal = {International Journal of Sport Management and Marketing}, - volume = {10}, - number = {1/2}, - pages = {104}, - issn = {1475-8962}, - doi = {10.1504/IJSMM.2011.043618} -} - -@article{McDonald1998a, - title = {Public Participation in Plastics Recycling Schemes}, - author = {McDonald, Seonaidh and Ball, Rob}, - year = {1998}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {22}, - number = {3-4}, - pages = {123--141}, - issn = {09213449}, - doi = {10.1016/S0921-3449(97)00044-X}, - abstract = {Without public contributions, recycling from domestic waste would not be possible. In order to support recycling projects it is important to try to understand who recycles, how they recycle, and why they recycle. This paper presents the results of a structured survey of 500 members of the public served by schemes to collect plastics waste for recycling. Data were gathered on the characteristics, behaviours and motivations of recyclers. The authors also sought to discover how the public perceive plastics compared to other materials, and as a recyclable material. Responses were collected in such a way that the awareness of the recyclability of materials could be compared with the recycling behaviour of respondents. An element of comparison was introduced between those served by a system of bottle banks (bring scheme) and those covered by a household collection (collect scheme). The survey results are reported and their implications for the management of post- consumer plastics waste collection schemes are discussed.}, - isbn = {0921-3449}, - keywords = {Domestic waste,Public attitudes,Public participation,Recycling}, - file = {/Users/fabio/Zotero/storage/PR5GH8LQ/Public participation in plastics recycling schemes.pdf} -} - -@book{McDonald2000, - title = {People and {{Computers XIV}} \textemdash{} {{Usability}} or {{Else}}!}, - editor = {McDonald, Sharon and Waern, Yvonne and Cockton, Gilbert}, - year = {2000}, - publisher = {{Springer London}}, - address = {{London}}, - doi = {10.1007/978-1-4471-0515-2}, - isbn = {978-1-85233-318-8} -} - -@article{mcdonoughAnalysisPublicationTrends2017, - title = {Analysis of Publication Trends in Ecosystem Services Research}, - author = {McDonough, Kelsey and Hutchinson, Stacy and Moore, Trisha and Hutchinson, J. M.Shawn}, - year = {2017}, - month = jun, - journal = {Ecosystem Services}, - volume = {25}, - pages = {82--88}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.03.022}, - urldate = {2021-04-23}, - abstract = {Scholarly journal publications on the topic of ecosystem services have substantially grown throughout the past decade, which is evidenced by an expanding world-wide research base. However, several challenges in the field of ecosystem services still remain, including conflicting approaches to ecosystem services terminology, classification schemes, research methods, and reporting requirements. We assess the development and disciplinary focus of ecosystem service research over the last decade using a meta-analysis of peer-reviewed journal publications. The journals of Shengtai Xuebao Acta Ecologica Sinica, Ecosystem Services, PLoS One, and Ecological Economics lead scholarly journals publishing ecosystem services-focused articles. The European Union leads ecosystem services publications (42\%), while the United States is responsible for 30\% of ecosystem services publications. This analysis is supplemented by a discussion on ecosystem services-focused research and policy to identify trends that encourage future study to resolve some of the current issues faced by the research community.}, - keywords = {Ecosystem services,Meta-analysis,Natural resource management} -} - -@article{McGann2019, - title = {Innovation Labs and Co-Production in Public Problem Solving}, - author = {McGann, Michael and Wells, Tamas and Blomkamp, Emma}, - year = {2019}, - journal = {Public Management Review}, - volume = {00}, - number = {00}, - pages = {1--20}, - publisher = {{Routledge}}, - issn = {14719045}, - doi = {10.1080/14719037.2019.1699946}, - abstract = {Governments are increasingly establishing innovation labs to enhance public problem solving. Despite the speed at which these new units are being established, they have only recently begun to receive attention from public management scholars. This study assesses the extent to which labs are enhancing strategic policy capacity through pursuing more collaborative and citizen-centred approaches to policy design. Drawing on original case study research of five labs in Australia and New Zealand, it examines the structure of lab's relationships to government partners, and the extent and nature of their activities in promoting citizen-participation in public problem solving.}, - keywords = {co-creation,co-production,policy advisory systems,Public innovation,public sector innovation labs}, - file = {/Users/fabio/Zotero/storage/WQGKRK84/Innovation labs and co-production in public problem solving.pdf} -} - -@article{mcgowanDesignPrinciplesData2022, - title = {Design {{Principles}} for {{Data Analysis}}}, - author = {McGowan, Lucy D'Agostino and Peng, Roger D. and Hicks, Stephanie C.}, - year = {2022}, - month = jul, - journal = {Journal of Computational and Graphical Statistics}, - volume = {0}, - number = {0}, - pages = {1--8}, - publisher = {{Taylor \& Francis}}, - issn = {1061-8600}, - doi = {10.1080/10618600.2022.2104290}, - urldate = {2023-01-14}, - abstract = {The data revolution has led to an increased interest in the practice of data analysis. While much has been written about statistical thinking, a complementary form of thinking that appears in the practice of data analysis is design thinking\textemdash the problem-solving process to understand the people for whom a solution is being designed. For a given problem, there can be significant or subtle differences in how a data analyst (or producer of a data analysis) constructs, creates, or designs a data analysis, including differences in the choice of methods, tooling, and workflow. These choices can affect the data analysis products themselves and the experience of the consumer of the data analysis. Therefore, the role of a producer can be thought of as designing the data analysis with a set of design principles. Here, we introduce design principles for data analysis and describe how they can be mapped to data analyses in a quantitative and informative manner. We also provide data showing variation of principles within and between producers of data analyses. Our work suggests a formal mechanism to describe data analyses based on design principles. These results provide guidance for future work in characterizing the data analytic process. Supplementary materials for this article are available online.}, - keywords = {Data science,Design,Education,Statistics}, - file = {/Users/fabio/Zotero/storage/MH7VYRLM/McGowan et al_2022_Design Principles for Data Analysis.pdf} -} - -@incollection{McIntyre2016, - title = {Multinational {{Corporations}} and the {{Circular Economy}}: {{How Hewlett Packard Scales Innovation}} and {{Technology}} in {{Its Global Supply Chain}}}, - booktitle = {Taking {{Stock}} of {{Industrial Ecology}}}, - author = {McIntyre, Kirstie and Ortiz, John A.}, - year = {2016}, - pages = {317--330}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-319-20571-7_17} -} - -@article{McIntyre2017, - title = {The Inescapably Ethical Foundation of Sustainability}, - author = {McIntyre, M. L. and Caputo, T. and Murphy, S. A.}, - year = {2017}, - journal = {International Journal of Business Governance and Ethics}, - volume = {12}, - number = {2}, - pages = {127--150}, - publisher = {{Inderscience Enterprises Ltd.}}, - issn = {1741802X}, - doi = {10.1504/IJBGE.2017.086471}, - urldate = {2020-05-27}, - abstract = {In this paper, we show how various authors have discussed the idea of sustainability and linked it to ethics and ethical behaviour. We further show that ideas of sustainability are closely linked to the notion of sameness through time. We discuss sameness in an object-predicate framework and show that in this context, it requires selecting clear criteria, with behaviours adopted to meet those criteria. An important insight from the object-predicate framework is that selection of the criteria for sameness is shown to rest entirely on the value judgements of those making the selection. We provide a detailed example that demonstrates this, and argue that given the prominence of value judgements in assessments of sameness (and in this sense, of sustainability), ethics are unavoidably at its foundation. Examining ideas of sustainability in this way may provide insights into how we might become better able to meet the conception of sustainable development articulated in the Brundtland Report.}, - keywords = {Ethics,Intergenerational responsibility,Sustainability/}, - file = {/Users/fabio/Zotero/storage/HD8K2RU2/mcintyre2017.pdf} -} - -@article{mckenzieMillennialUtopiansPrepper2021, - title = {Millennial Utopians and Prepper Subcultures: {{Contemporary}} Utopianism on the Left and Right}, - author = {McKenzie, Jordan}, - year = {2021}, - month = feb, - journal = {Futures}, - volume = {126}, - pages = {102678}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102678}, - urldate = {2020-12-24} -} - -@article{Mcmenamin2014, - title = {The Production of Anatomical Teaching Resources Using Three-Dimensional ({{3D}}) Printing Technology}, - author = {Mcmenamin, Paul G. and Quayle, Michelle R. and Mchenry, Colin R. and Adams, Justin W.}, - year = {2014}, - journal = {Anatomical Sciences Education}, - volume = {7}, - number = {6}, - pages = {479--486}, - issn = {19359780}, - doi = {10.1002/ase.1475}, - abstract = {The teaching of anatomy has consistently been the subject of societal controversy, especially in the context of employing cadaveric materials in professional medical and allied health professional training. The reduction in dissection-based teaching in medical and allied health professional training programs has been in part due to the financial considerations involved in maintaining bequest programs, accessing human cadavers and concerns with health and safety considerations for students and staff exposed to formalin-containing embalming fluids. This report details how additive manufacturing or three-dimensional (3D) printing allows the creation of reproductions of prosected human cadaver and other anatomical specimens that obviates many of the above issues. These 3D prints are high resolution, accurate color reproductions of prosections based on data acquired by surface scanning or CT imaging. The application of 3D printing to produce models of negative spaces, contrast CT radiographic data using segmentation software is illustrated. The accuracy of printed specimens is compared with original specimens. This alternative approach to producing anatomically accurate reproductions offers many advantages over plastination as it allows rapid production of multiple copies of any dissected specimen, at any size scale and should be suitable for any teaching facility in any country, thereby avoiding some of the cultural and ethical issues associated with cadaver specimens either in an embalmed or plastinated form. Anat Sci Educ. \textcopyright{} 2014 American Association of Anatomists.}, - isbn = {1935-9780 (Electronic)\textbackslash r1935-9772 (Linking)}, - pmid = {24976019}, - keywords = {3D printing,Additive manufacturing,Anatomical models,Cadavers,Gross anatomy education,Human anatomy,Image processing,Medical education,Rapid prototyping}, - file = {/Users/fabio/Zotero/storage/JKRSUV8J/The production of anatomical teaching resources using three‐dimensional (3D) printing technology.pdf} -} - -@misc{McN2012, - title = {Filament {{Maker}} \textendash{} {{Filabot}}}, - author = {{Filabot}}, - year = {2012}, - journal = {Filabot}, - urldate = {2020-03-18}, - howpublished = {http://www.filabot.com/} -} - -@article{McNulty1999, - title = {Dispersion of {{Lead Zirconate Titanate}} for {{Fused Deposition}} of {{Ceramics}}}, - author = {McNulty, Thomas F. and Shanefield, Daniel J. and Danforth, Stephen C. and Safari, Ahmad}, - year = {1999}, - month = jul, - journal = {Journal of the American Ceramic Society}, - volume = {82}, - number = {7}, - pages = {1757--1760}, - issn = {00027820}, - doi = {10.1111/j.1151-2916.1999.tb01996.x}, - urldate = {2015-03-17}, - file = {/Users/fabio/Zotero/storage/YVDYZWNU/McNulty et al. - 1999 - Dispersion of Lead Zirconate Titanate for Fused Deposition of Ceramics.pdf} -} - -@techreport{MEA2005, - title = {Ecosystems and {{Human}} Well-Being: {{Synthesis}}}, - author = {{MEA}}, - year = {2005}, - urldate = {2021-03-30}, - isbn = {1-59726-040-1}, - file = {/Users/fabio/Zotero/storage/IX6QXNKU/full-text.pdf} -} - -@book{MEA2005a, - title = {Ecosystems and Human Well-Being}, - author = {Assessment, Millenium Ecosystem}, - year = {2005}, - journal = {Island press Washington}, - volume = {563}, - urldate = {2020-05-24}, - abstract = {People's relationships with ecosystems have both beneficial and disadvantageous aspects, which can be expressed as ecosystem services and disservices. Human well-being is dependent on these services, but people use, and are affected by, them in many contrasted ways. Well-being is inequitably distributed, often as a consequence of the ways particular groups use ecosystems. Tropical rain forest ecosystems largely supply services to people not living the forests, while urban ecosystems both depend on materials from other ecosystems and alter ecosystems elsewhere through emissions, pollutant release, waste flows, and land use change for food production and mineral extraction.}, - isbn = {92 4 156309 5}, - keywords = {Cultural services,Disease,Ecosystem disservices,Ecosystem services,Ecosystems,Green infrastructure,Health,Human well-being,Provisioning services,Regulating services,Security,Social relations,Tropical rain forests,Urban areas}, - file = {/Users/fabio/Zotero/storage/MBG2CJ5A/full-text.pdf} -} - -@article{Meadows2020, - title = {The Use of Scenarios in Developing Strategy: {{An}} Analysis of Conversation and Video Data}, - author = {Meadows, Maureen and O'Brien, Frances A.}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120147}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120147}, - urldate = {2020-06-22} -} - -@article{meadSustainabilityOrientedInnovation2022, - title = {Sustainability Oriented Innovation Narratives: {{Learning}} from Nature Inspired Innovation}, - author = {Mead, Taryn and Jeanrenaud, Sally and Bessant, John}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {344}, - pages = {130980}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130980}, - urldate = {2022-03-08}, - abstract = {Recent research suggests that sustainability-oriented innovation may require different circumstances within organizations than traditional innovation research has revealed. More specifically, nature-inspired innovation (NII) has become increasingly common in recent years, and yet it is not fully understood how it is perceived within adopting organizations. This study addresses this gap by identifying how individual accounts collectively form organizational narratives that shape sustainability-oriented innovation (SOI) processes within MNCs and three SOI narratives of amongst teams implementing NII in seven multinational corporations. Cases were selected for their application of NII approaches including biomimicry, cradle to cradle, circular economy, and industrial ecology (collectively referred to as nature-inspired innovation). Using data generated from semi-structured interviews (n = 52) and NII project documents, three types of organizational narratives related to SOI were identified: Ambiguous, Accountable, and Aspirational. Narratives of SOI in organizations adopting NII are strongly influenced by overall stage of corporate sustainability; the engagement of leadership, and the innovation infrastructure and culture.} -} - -@article{meathCodesigningMultilevelPlatform2022, - title = {Co-Designing a Multi-Level Platform for Industry Level Transition to Circular Economy Principles: {{A}} Case Study of the Infrastructure {{CoLab}}}, - author = {Meath, Cristyn and Karlov{\v s}ek, Jurij and Navarrete, Claudia and Eales, Michael and Hastings, Patrick}, - year = {2022}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {347}, - pages = {131080}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131080}, - urldate = {2022-04-11} -} - -@article{mecklingPoliticalStrategiesClimate2023, - title = {Political Strategies for Climate and Environmental Solutions}, - author = {Meckling, Jonas and Karplus, Valerie J.}, - year = {2023}, - month = may, - journal = {Nature Sustainability}, - pages = {1--10}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-023-01109-5}, - urldate = {2023-05-11}, - abstract = {Many of the barriers to progress in addressing environmental problems, such as climate change, are political. We argue that politics should not be seen only as a constraint but be recognized as a target of intervention to advance environmental solutions. We use the example of climate change to illustrate how insight into politics can help policymakers craft strategies to address three gaps: the ambition gap, the implementation gap and the international action gap. Focusing on politically effective choices that are feasible today and have the potential to ease political barriers to future policy action can broaden the solution space.}, - copyright = {2023 Springer Nature Limited}, - langid = {english}, - keywords = {Climate-change mitigation,Politics,Sustainability}, - file = {/Users/fabio/Zotero/storage/VRI7RD5I/Meckling y Karplus - 2023 - Political strategies for climate and environmental.pdf} -} - -@article{Medellin-Castillo2019, - title = {Design and {{Manufacturing Strategies}} for {{Fused Deposition Modelling}} in {{Additive Manufacturing}}: {{A Review}}}, - author = {{Medellin-Castillo}, Hugo I. and {Zaragoza-Siqueiros}, Jorge}, - year = {2019}, - month = dec, - journal = {Chinese Journal of Mechanical Engineering}, - volume = {32}, - number = {1}, - pages = {53}, - issn = {1000-9345}, - doi = {10.1186/s10033-019-0368-0} -} - -@article{meertImpactPlasticBag2021, - title = {Impact of Plastic Bag Bans on Retail Return Polyethylene Film Recycling Contamination Rates and Speciation}, - author = {Meert, Jenna and Izzo, Austin and Atkinson, John D.}, - year = {2021}, - month = nov, - journal = {Waste Management}, - volume = {135}, - pages = {234--242}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.08.043}, - urldate = {2021-09-27} -} - -@book{Megahed2016, - title = {Metal Additive-Manufacturing Process and Residual Stress Modeling}, - author = {Megahed, Mustafa and Mindt, Hans-Wilfried and N'Dri, Narcisse and Duan, Hongzhi and Desmaison, Olivier}, - year = {2016}, - journal = {Integrating Materials and Manufacturing Innovation}, - volume = {5}, - publisher = {{Integrating Materials and Manufacturing Innovation}}, - issn = {2193-9764}, - doi = {10.1186/s40192-016-0047-2}, - isbn = {4019201600472}, - keywords = {As-built porosity,Blown powder,Distortion,ICME,Metal additive manufacturing,Multi-physics modeling,Multi-scale modeling,Powder bed,Process modeling,Residual stress,Wire feed}, - file = {/Users/fabio/Zotero/storage/DTADQKLI/Metal additive-manufacturing process and residual stress modeling.pdf} -} - -@article{Mehat2011, - title = {Optimization of Mechanical Properties of Recycled Plastic Products via Optimal Processing Parameters Using the {{Taguchi}} Method}, - author = {Mehat, Nik Mizamzul and Kamaruddin, Shahrul}, - year = {2011}, - month = dec, - journal = {Journal of Materials Processing Technology}, - volume = {211}, - number = {12}, - pages = {1989--1994}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2011.06.014} -} - -@article{Meherishi2019, - title = {Sustainable Packaging for Supply Chain Management in the Circular Economy: {{A}} Review}, - author = {Meherishi, Lavanya and Narayana, Sushmita A. and Ranjani, K. S.}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117582}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.07.057}, - urldate = {2020-03-22}, - abstract = {Packaging enables the movement of product from its point of origin to its point of consumption and influences all other industries directly or indirectly. Despite technological advancements, increasing length of global supply chains for products has led to a simultaneous increase in the use of packaging layers and associated waste along the supply chain. Thus, packaging poses challenges and opportunities to the environment and society, with implications for supply chain costs. With growing popularity of concepts such as circular economy and sustainability, packaging and its relationship with sustainability and supply chain management in a circular economy needs to be studied. This paper presents a systematic literature review of studies done over the last 18 years with the objective to generate a greater understanding of the work done in the field of sustainable packaging in supply chain management (SPSCM). Our findings indicate SPSCM trends are aligned to circular economy concepts but have not adequately considered the interaction of the product with its packaging system. Research efforts in SPSCM are restricted to environmental and economic dimensions and are mostly concentrated in developed economies. The review identifies three main supply chain structures studied in SPSCM literature of which there has been an increased focus on fragmented portions and dyads of the supply chain with respect to packaging. The research contributes by identifying and mapping the collated literature to organizational theories that support and drive SPSCM. In particular, the institutional theory, stakeholder theory and ecological modernization theory are investigated from a SPSCM perspective. Further, the three organizational theories are used to develop a framework for circular economy to highlight future avenues for research and practice in SPSCM for a circular economy.}, - keywords = {Circular economy,Literature review,Organizational theories,Packaging,Supply chain management,Sustainability} -} - -@article{mehtaUsingRegionalMaterial2022, - title = {Using Regional Material Flow Analysis and Geospatial Mapping to Support the Transition to a Circular Economy for Plastics}, - author = {Mehta, Neha and Cunningham, Eoin and Doherty, Martin and Sainsbury, Peter and Bolaji, Ife and {Firoozi-Nejad}, Behnam and Smyth, Beatrice M}, - year = {2022}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {179}, - pages = {106085}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106085}, - urldate = {2022-01-25} -} - -@article{Meier2019, - title = {Unlocking Innovation in the Sport Industry through Additive Manufacturing}, - author = {Meier, Marlon and Tan, Kim Hua and Lim, Ming K. and Chung, Leanne}, - year = {2019}, - month = jun, - journal = {Business Process Management Journal}, - volume = {25}, - number = {3}, - pages = {456--475}, - issn = {1463-7154}, - doi = {10.1108/BPMJ-10-2017-0285} -} - -@article{meindlFourSmartsIndustry2021, - title = {The Four Smarts of {{Industry}} 4.0: {{Evolution}} of Ten Years of Research and Future Perspectives}, - author = {Meindl, Benjamin and Ayala, N{\'e}stor Fabi{\'a}n and Mendon{\c c}a, Joana and Frank, Alejandro G.}, - year = {2021}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {168}, - pages = {120784}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120784}, - urldate = {2021-04-13} -} - -@article{meis-harrisWhatRoleEcolabels2021, - title = {What Is the Role of Eco-Labels for a Circular Economy? {{A}} Rapid Review of the Literature}, - author = {{Meis-Harris}, Dr Julia and Klemm, Dr. Celine and Kaufman, Dr Stefan and Curtis, Dr Jim and Borg, Ms. Kim and Bragge, Dr Peter}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {127134}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127134}, - urldate = {2021-04-29} -} - -@article{meisingerTragedyIntangibleCommons2022, - title = {A Tragedy of Intangible Commons: {{Riding}} the Socioecological Wave}, - author = {Meisinger, Norman}, - year = {2022}, - month = mar, - journal = {Ecological Economics}, - volume = {193}, - pages = {107298}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107298}, - urldate = {2022-01-17} -} - -@article{Meissner2021, - title = {The Rise of Do-It-Yourself ({{DiY}}) Laboratories: {{Implications}} for Science, Technology, and Innovation ({{STI}}) Policy}, - author = {Meissner, Dirk and Sarpong, David and Ofosu, George and Botchie, David}, - year = {2021}, - journal = {Technological Forecasting and Social Change}, - volume = {165}, - pages = {120589}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120589}, - urldate = {2021-01-12}, - isbn = {2021.120589}, - file = {/Users/fabio/Zotero/storage/APE6HASN/full-text.pdf} -} - -@article{meissnerRepairCareDimensions2021, - title = {Repair Is Care? - {{Dimensions}} of Care within Collaborative Practices in Repair Cafes}, - author = {Mei{\ss}ner, Magdalena}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {299}, - pages = {126913}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126913}, - urldate = {2021-04-29}, - abstract = {In the past few years, policymakers, funders and academics have shown an increasing interest in discussing the potentials of Repair Cafes to contribute towards sustainability transformations. With the growing number of repair cafes in the global north, the ways of telling about their potential for individuals and society has grown. Some of the narratives readily connect to policy agendas for neighborhood regeneration and inclusive innovation. Other narratives derive from civic activism, expressing that repairing objects is one way to develop a countermovement against the increasing throwaway society. The proposed paper draws on feminist theories of care and care-economy, science and technology studies and sociological theories of sustainable consumption in order to provide insights as to whether and to what extent caring can be ascribed importance in the collective processes of repair. Based on empirical data from citizen science research, the dimensions of care are analyzed and their role in repairing among the participants in repair cafes is exemplified. The proposed paper will elaborate the empirical findings and relate them to a broader debate on social transformation towards sustainable consumption.} -} - -@article{Mekhilef1998, - title = {Conception Int\'egr\'ee Assist\'ee Par Ordinateur}, - author = {Mekhilef, Mounib and Yannou, Bernard}, - year = {1998}, - journal = {Techniques de l'ingenieur}, - volume = {33}, - number = {0}, - file = {/Users/fabio/Zotero/storage/LLYC2DNH/Conception intégrée assistée par ordinateur.pdf} -} - -@article{melanderGreenInnovationNetworks2022, - title = {Green Innovation Networks: {{A}} Research Agenda}, - author = {Melander, Lisa and Arvidsson, Ala}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {357}, - pages = {131926}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131926}, - urldate = {2022-05-23} -} - -@article{Melchels2012, - title = {Additive Manufacturing of Tissues and Organs}, - author = {Melchels, Ferry P.W. and a.N. Domingos, Marco and Klein, Travis J. and Malda, Jos and Bartolo, Paulo J. and Hutmacher, Dietmar W.}, - year = {2012}, - month = aug, - journal = {Progress in Polymer Science}, - volume = {37}, - number = {8}, - pages = {1079--1104}, - publisher = {{Elsevier Ltd}}, - issn = {00796700}, - doi = {10.1016/j.progpolymsci.2011.11.007}, - urldate = {2013-03-07}, - keywords = {additive manufacturing}, - file = {/Users/fabio/Zotero/storage/ZWJTIBK4/Melchels et al. - 2012 - Additive manufacturing of tissues and organs.pdf} -} - -@article{Melican2001, - title = {Three-Dimensional Printing and Porous Metallic Surfaces: {{A}} New Orthopedic Application}, - author = {Melican, Mora C. and Zimmerman, Mark C. and Dhillon, Manjit S. and Ponnambalam, Amrit R. and Curodeau, Alain and Parsons, J. Russell}, - year = {2001}, - journal = {Journal of Biomedical Materials Research}, - volume = {55}, - number = {2}, - pages = {194--202}, - issn = {00219304}, - doi = {10.1002/1097-4636(200105)55:2<194::AID-JBM1006>3.0.CO;2-K}, - abstract = {As-cast, porous surfaced CoCr implants were tested for bone interfacial shear strength in a canine transcortical model. Three-dimensional printing (3DP) was used to create complex molds with a dimensional resolution of 175 mum 3DP is a solid freeform fabrication technique that can generate ceramic pieces by printing binder onto a bed of ceramic powder. A printhead is rastered across the powder, building a monolithic mold, layer by layer. Using these 3DP molds, surfaces can be textured "as-cast," eliminating the need for additional processing as with commercially available sintered beads or wire mesh surfaces. Three experimental textures were fabricated, each consisting of a surface layer and deep layer with distinct individual porosities. The surface layer ranged from a porosity of 38\% (Surface Y) to 67\% (Surface Z), whereas the deep layer ranged from 39\% (Surface Z) to 63\% (Surface Y). An intermediate texture was fabricated that consisted of 43\% porosity in both surface and deep layers (Surface X). Control surfaces were commercial sintered beaded coatings with a nominal porosity of 37\%. A well-documented canine transcortical implant model was utilized to evaluate these experimental surfaces. In this model, five cylindrical implants were placed in transverse bicortical defects in each femur of purpose bred coon-hounds. A Latin Square technique was used to randomize the experimental implants left to right and proximal to distal within a given animal and among animals. Each experimental site was paired with a porous coated control site located at the same level in the contralateral limb. Thus, for each of the three time periods (6, 12, and 26 weeks) five dogs were utilized, yielding a total of 24 experimental sites and 24 matched pair control sites. At each time period, mechanical push-out tests were used to evaluate interfacial shear strength. Other specimens were subjected to histomorphometric analysis. Macrotexture Z, with the highest surface porosity, failed at a significantly higher shear stress (p = 0.05) than the porous coated controls at 26 weeks. It is postulated that an increased volume of ingrown bone, resulting from a combination of high surface porosity and a high percentage of ingrowth, was responsible for the observed improvement in strength. Macrotextures X and Y also had significantly greater bone ingrowth than the controls (p = 0.05 at 26 weeks), and displayed, on average, greater interfacial shear strengths than controls, although they were not statistically significant. (C) 2001 John Wiley \& Sons, Inc.}, - isbn = {0021-9304}, - pmid = {11255171}, - keywords = {Bone ingrowth,Bone/implant interface,Interfacial shear strength,Orthopedic implant surfaces,Three-dimensional printing}, - file = {/Users/fabio/Zotero/storage/MAL44S78/Melican et al. - 2001 - Three-dimensional printing and porous metallic surfaces A new orthopedic application.pdf} -} - -@article{mellalObsolescenceReviewLiterature2020, - title = {Obsolescence \textendash{} {{A}} Review of the Literature}, - author = {Mellal, Mohamed Arezki}, - year = {2020}, - month = aug, - journal = {Technology in Society}, - pages = {101347}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101347}, - urldate = {2020-08-15} -} - -@article{Mellor2014, - title = {Additive Manufacturing: {{A}} Framework for Implementation}, - author = {Mellor, Stephen and Hao, Liang and Zhang, David}, - year = {2014}, - month = mar, - journal = {International Journal of Production Economics}, - volume = {149}, - pages = {194--201}, - issn = {09255273}, - doi = {10.1016/j.ijpe.2013.07.008}, - urldate = {2014-05-27}, - isbn = {7709994113}, - keywords = {additive manufacturing}, - file = {/Users/fabio/Zotero/storage/UR9D53MX/Additive manufacturing A framework for implementation.pdf} -} - -@book{Melorose2015, - title = {Green {{Manufacturing}}}, - author = {Melorose, J. and Perroy, R. and Careas, S.}, - editor = {Dornfeld, David A.}, - year = {2013}, - journal = {Climate Change 2013 - The Physical Science Basis}, - volume = {1}, - eprint = {1011.1669v3}, - publisher = {{Springer US}}, - address = {{Boston, MA}}, - issn = {1098-6596}, - doi = {10.1007/978-1-4419-6016-0}, - archiveprefix = {arxiv}, - isbn = {978-1-4419-6015-3}, - pmid = {25246403}, - keywords = {icle}, - file = {/Users/fabio/Zotero/storage/DBEYYJ2Y/Green Manufacturing.pdf} -} - -@article{memonCollaborativeNetworkingInnovation2021, - title = {Toward Collaborative Networking among Innovation Laboratories: A Conceptual Framework}, - author = {Memon, Atia Bano and Meyer, Kyrill and Tunio, Muhammad Nawaz}, - year = {2021}, - month = sep, - journal = {International Journal of Innovation Science}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1757-2223}, - doi = {10.1108/IJIS-04-2021-0069}, - urldate = {2021-09-23}, - keywords = {Collaboration platforms,Collaborative networking,Innovation centers,Innovation intermediation,Innovation laboratories,Innovation platforms,Inter-InnoLab collaboration,Organizational interconnection} -} - -@article{MendesCampolina2017, - title = {A Study on the Environmental Aspects of {{WEEE}} Plastic Recycling in a {{Brazilian}} Company}, - author = {Mendes Campolina, Juliana and S{\~a}o Leandro Sigrist, Carolina and {Faulstich de Paiva}, Jane Maria and Oliveira Nunes, Andr{\'e}a and {da Silva Moris}, Virg{\'i}nia Aparecida}, - year = {2017}, - month = dec, - journal = {The International Journal of Life Cycle Assessment}, - volume = {22}, - number = {12}, - pages = {1957--1968}, - issn = {0948-3349}, - doi = {10.1007/s11367-017-1282-2} -} - -@article{mendez-alvaIndustrialSymbiosisProfiles2021, - title = {Industrial Symbiosis Profiles in Energy-Intensive Industries: {{Sectoral}} Insights from Open Databases}, - author = {{Mendez-Alva}, Francisco and Cervo, H{\'e}l{\`e}ne and Krese, Gorazd and Van Eetvelde, Greet}, - year = {2021}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {314}, - pages = {128031}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128031}, - urldate = {2021-07-05} -} - -@article{Mendoza2019, - title = {Building a Business Case for Implementation of Circular Economy in Higher Education Institutions}, - author = {Mendoza, Joan Manuel F. and {Gallego-Schmid}, Alejandro and Azapagic, Adisa}, - year = {2019}, - journal = {Journal of Cleaner Production}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.045}, - abstract = {Various frameworks have been developed to guide organisations in embedding circular economy principles in their strategy and operational practice. However, there is a lack of studies analysing practical implementation of circular economy thinking in the higher education sector. Higher education institutions are strategic agents in supporting sustainable development through teaching, research and social outreach activities. They also represent a source of environmental impacts due to significant resource consumption and waste generation. This paper presents the first comprehensive study showing how higher education institutions can use an action-led step-by-step approach to build a business case and implement circular economy thinking in practice. The University of Manchester is used as an illustrative example of a large higher education institution. First, a background analysis and semi-structured interviews were carried out to determine the scope of the university's current sustainability policies and the ability of the management systems to respond to circular economy challenges. This was followed by stakeholder workshops to identify gaps and opportunities for building a business case for implementation of a circular economy. Finally, a critical assessment of the outcomes was carried out to identify further research needs for implementation of a circular economy in higher education institutions. Although focused on the higher education sector, the proposed action-led approach can be used by any organisation in the service sector looking to build more circular and sustainable business models.}, - keywords = {backcasting,business model innovation,framework,resource efficiency,service sector,sustainable,university}, - file = {/Users/fabio/Zotero/storage/XNFJ27KK/Building a business case for implementation of circular economy in higher education institutions.pdf} -} - -@article{Mendoza2019a, - title = {A Methodological Framework for the Implementation of Circular Economy Thinking in Higher Education Institutions: {{Towards}} Sustainable Campus Management}, - author = {Mendoza, Joan Manuel F. and {Gallego-Schmid}, Alejandro and Azapagic, Adisa}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {226}, - pages = {831--844}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.060}, - urldate = {2020-03-22}, - abstract = {Many higher education institutions have started to develop academic curricula, research capacity and outreach activities related to circular economy. However, little is known yet on how to apply circular economy thinking to sustainable campus management. In an attempt to address this gap, this paper proposes a methodological framework and guidance to help universities develop a circular economy strategy aimed at improving resource efficiency and environmental sustainability of their campus operations. The approach is compatible with sustainability management frameworks as it follows the well-known iterative process of planning, doing, checking and improving. The framework involves three main steps: analysis of current situation with respect to circular economy within the organisation; stakeholder engagement to get a buy-in and inform the development of a circular economy strategy; and implementation of the strategy following the guidelines provided within the framework. Application of the framework is illustrated through a case of the University of Manchester, demonstrating how circular economy principles can be used to benchmark existing sustainability policies and action plans. The paper also shows how engaging key stakeholders can be used to identify challenges and opportunities for embedding circular economy thinking into the university's sustainability management systems. The proposed framework and the guidelines for implementation of circular economy thinking are generic and can be applied by any institution across the higher education sector.}, - keywords = {Corporate sustainability,Resource efficiency,Social responsibility,Stakeholder engagement,Sustainable campus management} -} - -@article{menendez-caravacaExploringLinkFree2021, - title = {Exploring the Link between Free and Open Source Software and the Collaborative Economy: {{A Delphi-based}} Scenario for the Year 2025}, - author = {{Men{\'e}ndez-Caravaca}, Elo{\'i}sa and Bueno, Salvador and Gallego, M. Dolores}, - year = {2021}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {173}, - pages = {121087}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121087}, - urldate = {2021-08-24}, - file = {/Users/fabio/Zotero/storage/ML5RR54Z/full-text.pdf} -} - -@article{Menold2017, - title = {Prototype for {{X}} ({{PFX}}): {{A}} Holistic Framework for Structuring Prototyping Methods to Support Engineering Design}, - author = {Menold, Jessica and Jablokow, Kathryn and Simpson, Timothy}, - year = {2017}, - journal = {Design Studies}, - volume = {50}, - pages = {70--112}, - publisher = {{Elsevier Ltd}}, - issn = {0142694X}, - doi = {10.1016/j.destud.2017.03.001}, - abstract = {While scholars have studied benefits and drawbacks of prototype development, few have attempted to create a holistic framework to structure prototyping and combine insights from across technical domains. An extensive literature review of prototyping research and study of novice designers' mental models of prototyping is used to develop and validate a set of specifications for a holistic and structured prototyping framework. This work then introduces a novel framework to help structure prototyping, Prototype for X (PFX), as an alternative to traditional prototyping approaches in engineering design. Early results highlight the potential impact PFX can have on the design process and on the final design product compared to those achieved through `prototyping in the wild'. Future research directions are also discussed.}, - keywords = {design process,product development,prototypes,user centered design}, - file = {/Users/fabio/Zotero/storage/GZPDNRR4/Prototype for X (PFX)- A holistic framework for structuring prototyping methods to support engineering design.pdf} -} - -@article{Mention2019, - title = {Using Social Media to Leverage and Develop Dynamic Capabilities for Innovation}, - author = {Mention, Anne Laure and Barlatier, Pierre Jean and Josserand, Emmanuel}, - year = {2019}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {144}, - pages = {242--250}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.03.003}, - urldate = {2020-05-21}, - abstract = {Social media are essentially changing the way firms communicate, create and collaborate in and for innovation. In this special issue introductory article, we take stock of the robust multi-faceted nature of research and practice at the intersection of social media (SM) and innovation. We introduce the nine papers included in this special issue and highlight the rich variety of their contribution with reference to our organising framework. Diagnosing from a strategic perspective, we position SM strategy in and for innovation as an overlapping interaction between dynamic capabilities (sensing, seizing, reconfiguration) and the level of stakeholder engagement (macro, meso, micro). We explain how each interaction holds distinctive synergy in an open and collaborative innovation process. This organising framework shows how the malleable nature of SM creates opportunities for firms to engage widely distributed knowledge sources, enhance innovation capabilities and empower internal human resources towards an open and collaborative culture. Yet, we warn that all is not as rosy as it seems and a purposeful and coherent strategy that delivers distinctive `co-ownership' experiences is quintessential ingredient to realise profits from SM use in innovation.}, - keywords = {Crowdsourcing,Innovation communities,Open innovation,Organisational capabilities,R\&D,Social media} -} - -@article{menzelExplicitlyImplicitlyMeasured2021, - title = {Explicitly and Implicitly Measured Valence and Risk Attitudes towards Plastic Packaging, Plastic Waste, and Microplastic in a {{German}} Sample}, - author = {Menzel, Claudia and Brom, Julia and Heidbreder, Lea Marie}, - year = {2021}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {28}, - pages = {1422--1432}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2021.08.016}, - urldate = {2021-09-15} -} - -@article{meranGreenGrowthPossible2023, - title = {Is Green Growth Possible and Even Desirable in a Spaceship Economy?}, - author = {Meran, Georg}, - year = {2023}, - month = nov, - journal = {Ecological Economics}, - volume = {213}, - pages = {107947}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107947}, - urldate = {2023-08-31}, - abstract = {There seems to be a consensus among many growth and resource economists that perpetual growth can be ensured if it gets increasingly resource-efficient and if growth focuses on creating values, a result derived by models using production functions that allow asymptotically complete decoupling of the economy from its resource base by substituting natural resources through physical and knowledge capital. This growth process can be called green growth. The following paper attempts to show, within the framework of an semi-endogenous growth model using a linear-exponential production function (Linex function) with bounded resource efficiency, that the accumulation of physical and knowledge capital to substitute natural resources cannot guarantee green growth. As the population grows, per capita income decreases, and the economy's capital base decays. In addition, an ecological displacement effect resulting from the biophysical embeddedness of the economy further exacerbates the result. Physical capital pushes back the natural spaces necessary to regenerate natural services and resources and can, therefore, not be accumulated endlessly. A comparison with standard resource models shows that this displacement effect also limits growth for models with production functions with low elasticities of substitution. Finally, the analysis of transitory dynamics addresses aspects of intergenerational equality in a limited biosphere.}, - keywords = {Biophysical laws,Decoupling,Ecological economics,Green growth,Resource economics}, - file = {/Users/fabio/Zotero/storage/K96T3CRY/S0921800923002100.html} -} - -@article{Mercado-Colmenero2019, - title = {A Numerical and Experimental Study of the Compression Uniaxial Properties of {{PLA}} Manufactured with {{FDM}} Technology Based on Product Specifications}, - author = {{Mercado-Colmenero}, Jorge Manuel and {Rubio-Paramio}, Miguel Angel and {la Rubia-Garcia}, M{\textordfeminine} {\textordfeminine}D and {Lozano-Arjona}, David and {Martin-Do{\~n}ate}, Cristina}, - year = {2019}, - journal = {International Journal of Advanced Manufacturing Technology}, - pages = {1893--1909}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-019-03626-0}, - abstract = {This paper presents a numerical and experimental study of the compression uniaxial properties of PLA material manufactured with FDM based on product specifications. A first experimental test in accordance with the requirements and conditions established in the ISO 604 standard characterizes the mechanical and elastic properties of PLA manufactured with FDM technology and product requirements in a uniaxial compression stress field by testing six specimens. A second experimental test allows analyzing the structural behavior of the industrial case, evaluating the compression stiffness, the compression yield stress, the field of displacements, and stress along its elastic area until reaching the compression yield stress and the ultimate yield stress data. To improve the structural analysis of the case study, a numerical validation was carried out using two analytical models. The first analytical model applies an interpolation procedure to the experimental results of the tested specimens in order to characterize the uniaxial tension-compression curve versus the nominal deformations by means of an 8-degree polynomial function. The second model defines the plastic material as elastic and isotropic with Young's compression modulus constant and according to the guidelines established in ISO standard 604. The comparison between experimental tests and numerical simulation results for the study case verify that the new model that uses the proposed polynomial function is closer to the experimental solution with only an 0.36\% error, in comparison with the model with Young's compression modulus constant that reaches an error of 4.27\%. The results of the structural analysis of the mechanical element indicate that the elastic region of the plastic material PLA manufactured with FDM can be modeled numerically as an isotropic material, using the elastic properties from the experimental results of the specimens tested according to ISO standard 604. In this way, it is possible to characterize the PLA FDM material as isotropic, obtaining as an advantage its easy definition in the numerical simulation software as it does not require the modification of the constitutive equations in the material database. SEM micrographs have indicated that the fracture of the failed test specimens is of the brittle type, mainly caused by the separation between the central plastic filament layers of the specimens. The results presented suggest that the use of FDM technology with PLA material is promising for the manufacture of low volume industrial components that are subject to compression efforts or for the manufacture of components by the user. \textcopyright{} 2019, Springer-Verlag London Ltd., part of Springer Nature.}, - keywords = {Additive manufacturing,CAD,Experimental tests,FDM,Numerical simulation,Plastic part design}, - file = {/Users/fabio/Zotero/storage/5L49U68X/a numerical and experimental study of the compression uniaxial properties of pla manufactured with fdm technology based on product specifications.pdf} -} - -@inproceedings{Mercuri2014, - title = {An Educational Venture into {{3D Printing}}}, - booktitle = {2014 {{IEEE Integrated STEM Education Conference}}}, - author = {Mercuri, Rebecca and Meredith, Kevin}, - year = {2014}, - pages = {1--6}, - doi = {10.1109/ISECon.2014.6891037}, - abstract = {The results of the authors ambitious IEEE project involving the educational use of 3D printers are described. The intention was to involve college/university students in the construction of RepRap Prusa Mendel printers, with the goal of coordinating and accomplishing this in a single semester. Difficulties related to the availability and reliability of the printer used to create the plastic parts, and underestimates pertaining to the time, cost and complexity of the kit construction are detailed. Successful aspects of the project, including its use as a part of a Senior Engineering Capstone and as a live demonstration display for educational conferences, along with suggestions for implementation of similar initiatives, are provided.}, - isbn = {978-1-4799-3229-0}, - file = {/Users/fabio/Zotero/storage/27S59J44/Mercuri, Meredith - 2014 - An educational venture into 3D Printing.pdf} -} - -@article{Merindol2016, - title = {Le {{Livre Blanc}} Des {{Open Labs Le Livre}} Blanc Des {{Open Labs}}}, - author = {M{\'e}rindol, Val{\'e}rie and Bouquin, Nad{\`e}ge and Versailles, David W. and Capdevila, Ignasi and Aubouin, Nicolas and Chaffotec, Alexandra Le and Chiovetta, Alexis and Voisin, Thomas}, - year = {2016}, - pages = {350}, - abstract = {LE LIVRE BLANC DES OPEN LABS R\'ESUM\'E 01 R\'esum\'e Ce Livre blanc r\'ealise un \'etat des lieux des \guillemotleft{} open labs \guillemotright, ph\'enom\`ene \'emergent en France. Au-del\`a de la diversit\'e des initiatives (Fab Labs, Living Labs, hackerspaces / makerspaces, TechShops), il propose une d\'efi nition plus englobante et g\'en\'erique du ph\'enom\`ene : les \guillemotleft{} open labs \guillemotright{} constituent un lieu et une d\'emarche port\'es par des acteurs divers, en vue de renouveler les modalit\'es d'innovation et de cr\'eation par la mise en \oe uvre de processus collaboratifs et it\'eratifs, ouverts et donnant lieu \`a une mat\'erialisation physique ou virtuelle. Ce Livre blanc analyse la diversit\'e des open labs port\'es par des universit\'es et des \'ecoles, des entreprises, des entrepreneurs, des associations ou d'autres structures publiques (les h\^opitaux par exemple). Parce que ces initiatives introduisent une nouvelle mani\`ere de penser l'innovation et de concr\'etiser les projets, les pratiques mises en \oe uvre au sein des open labs se r\'ev\`elent en d\'ecalage par rapport \`a celles qui pr\'evalent dans les organisations traditionnelles. Le ph\'enom\`ene des open labs est en ce moment dans les lumi\`eres de l'actualit\'e. Ce document vise \`a permettre de mieux conna\^itre la r\'ealit\'e des activit\'es et des pratiques qui les caract\'erisent. Apr\`es une ann\'ee d'enqu\^etes de terrain et les activit\'es des experts du groupe de travail, ce Livre blanc souligne que les open labs sont autant un dispositif pour d\'evelopper de nouvelles approches de l'innovation qu'un vecteur de transformation des organisations. Nous proposons des outils de diagnostic strat\'egique pour les porteurs de chaque type d'open labs analys\'e dans cette \'etude (entreprises, institutions acad\'emiques, organi- sations publiques, start ups). Ce Livre blanc permet de mieux comprendre les objectifs des open labs, leurs caract\'eristiques en tant qu'espaces physiques et lieux d'\'echanges et de production, les pratiques, comme les d\'emarches d'open innovation qu'ils portent. Le pilotage des open labs varie en outre selon qu'ils sont issus d'initiatives individuelles ou qu'ils sont mis en place par des organisations. D'autres aspects portent sur la multidisciplinarit\'e au sein de l'open lab, et sur la vari\'et\'e des comp\'etences ou des profi ls qui contribuent \`a ses activit\'es. On trouvera enfi n tous les \'el\'ements qui portent sur la gouvernance de l'open lab, et sur les strat\'egies de fi nancement ou de labellisation. Pour conclure, nous soulignons une s\'erie de changements associ\'es aux open labs dans trois domaines : les individus, les organisations et les \'ecosyst\`emes. Tout concourt \`a distinguer le management de l'innovation du management de la technologie proprement dit. Au niveau des individus, nous mettons en \'evidence l'apparition de nouveaux liens sociaux et le retour des individus au c\oe ur du processus d'innovation. Au niveau des organisations, l'essentiel porte l'apparition de nouveaux profi ls professionnels et de nouveaux r\^oles pour les managers. Les open labs sont un vecteur de transformation : ils apportent un changement culturel et favorisent l'\'emergence de nouvelles formes d'organisation. Au niveau des \'ecosyst\`emes, enfi n, les open labs contribuent \`a changer les formes de gouvernance et de collaboration. Ils conduisent \`a d\'eplacer les fronti\`eres des \'ecosyst\`emes et \`a red\'efi nir les relations entre acteurs publics et acteurs priv\'es. 5} -} - -@article{Merli2018, - ids = {merli2018}, - title = {How Do Scholars Approach the Circular Economy? {{A}} Systematic Literature Review}, - author = {Merli, Roberto and Preziosi, Michele and Acampora, Alessia}, - year = {2018}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {178}, - pages = {703--722}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.12.112}, - urldate = {2020-03-21}, - abstract = {Circular Economy (CE) aims to overcome the take-make-dispose linear pattern of production and consumption, proposing a circular system in which the value of products, materials and resources is maintained in the economy as long as possible. In recent years there has been a proliferation of scholars' publications on the topic. This study presents the results of a systematic literature review exploring the state-of-the-art of academic research on CE. The paper examines the CE body of literature with a systematic approach, to provide an exhaustive analysis of the phenomenon with rigorous and reproducible research criteria. The revisited material consists of 565 articles collected through the Web of Science and Scopus databases, and has been evaluated using specific structural dimensions to group literature into analytical categories. Starting from being a concept studied in connection with industrial ecology, CE has slowly acquired its independent role in academic research, framed mainly into environmental sustainability related studies. As a result of policies implementation, academic production is mainly concentrated in China and Europe, employing tools and methods for modelling processes and supporting decision-making for CE implementation (e.g. Life Cycle Assessment and Material Flow Analysis). CE studies follow three main lines of action: the first aims to change the social and economic dynamics at macro and administrative level; the second to support firms in circular processes implementation at micro level to spread new forms of consumption and product design; the third, developed at meso level, discusses industrial symbiosis experiences. CE is associated with a variety of concepts, and waste management emerges as the most relevant sub-sector. CE is also strongly connected with the concept of sustainability, proposing ways to operationalize its implementation at the environmental and economic level, while scholars only marginally consider social and institutional implications. The most explored practices are those related to cleaner production, aiming at reducing environmental impact and waste production along the life cycle of a product, and optimizing the performance and efficiency of processes. Conversely, studies on CE may devote greater attention to strategies for social and institutional changes, able to transform the upstream process of production and consumption. Considering business model strategies, scholars mainly focus on studying closing material loops strategy, while slowing the loops, which requires a radical change of consumption and production patterns, is only marginally included with respect to CE implementation. This study's findings highlight CE as an evolving concept that still requires development to consolidate its definition, boundaries, principles and associated practices.}, - keywords = {Circular business model,Circular economy,Industrial ecology,Sustainability,Systematic literature review} -} - -@book{Merriam2009, - title = {Qualitative {{Research}}: {{A}} Guide to Design and Implementation}, - author = {Sharan, B.M}, - year = {2009}, - journal = {Jossey-Bass}, - issn = {19317360}, - isbn = {978-1-934142-28-8}, - file = {/Users/fabio/Zotero/storage/VT53545G/Sharan B. Merriam - Qualitative Research_ A Guide to Design and Implementation-Jossey-Bass (2009).pdf} -} - -@article{Mertens2017, - title = {Analysis of Thermal History Effects on Mechanical Anisotropy of {{3D-printed}} Polymer Matrix Composites via in Situ {{X-ray}} Tomography}, - author = {Mertens, J. C. E. and Henderson, K. and Cordes, N. L. and Pacheco, R. and Xiao, X. and Williams, J. J. and Chawla, N. and Patterson, B. M.}, - year = {2017}, - journal = {Journal of Materials Science}, - volume = {52}, - number = {20}, - pages = {12185--12206}, - publisher = {{Springer US}}, - issn = {0022-2461}, - doi = {10.1007/s10853-017-1339-4}, - file = {/Users/fabio/Zotero/storage/RKRNQNNU/analysis of thermal history effects on mechanical anisotropy of 3d-printed polymer matrix composites via in situ x-ray tomography.pdf} -} - -@article{mesaDevelopingIndicatorMaterial2020, - title = {Developing an Indicator for Material Selection Based on Durability and Environmental Footprint: {{A Circular Economy}} Perspective}, - author = {Mesa, Jaime and {Gonz{\'a}lez-Quiroga}, Arturo and Maury, Heriberto}, - year = {2020}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {160}, - pages = {104887}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104887}, - urldate = {2020-05-27} -} - -@article{mesaOrganisationalCapacitiesStrengthening2021, - title = {Organisational Capacities for the Strengthening of Social Innovation: Case Study in the {{Renacer Verde Association}}}, - author = {Mesa, Fabio Blanco and Monta{\~n}a, Maribel Martinez and S{\'a}nchez, Isaura Rojas}, - year = {2021}, - journal = {International Journal of Entrepreneurship and Innovation Management}, - volume = {25}, - number = {2/3}, - pages = {132}, - issn = {1368-275X}, - doi = {10.1504/IJEIM.2021.115048}, - urldate = {2021-06-08} -} - -@article{messinaPayYouOwn2023, - title = {`{{Pay}} as You Own' or `Pay as You Throw'? {{A}} Counterfactual Evaluation of Alternative Financing Schemes for Waste Services}, - shorttitle = {`{{Pay}} as You Own' or `Pay as You Throw'?}, - author = {Messina, G. and Tomasi, A. and Ivaldi, G. and Vidoli, F.}, - year = {2023}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {137363}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137363}, - urldate = {2023-05-11}, - abstract = {Italian municipalities finance waste services by applying either a general property tax (``pay-as-you own'' system, PAYO) or, less frequently, a fee calibrated to the waste produced by each household (``pay-as-you throw'' system, PAYT). The aim of this paper is to estimate what would be the impact of a massive implementation of PAYT schemes. We gather information for a panel of Italian municipalities, covering a ten years time span, in order to assess the impact of switching from PAYO to PAYT on both the amount of waste generated by households and the cost for waste services. Our empirical strategy is based on a IV 3SLS cost model in a counterfactual setting and deals with the simultaneous determination of the demand and supply side of waste services, also taking into account the cross dependency among sorted and unsorted waste. Our results show that the adoption of PAYT schemes brings a simultaneous significant reduction in both quantity and cost, especially for unsorted waste.}, - langid = {english}, - keywords = {Counterfactual setting,Instrumental variable,Local government,PAYT scheme,Waste management}, - file = {/Users/fabio/Zotero/storage/BL5P9LVU/Messina et al. - 2023 - ‘Pay as you own’ or ‘pay as you throw’ A counterf.pdf;/Users/fabio/Zotero/storage/FL83BVQU/S0959652623015214.html} -} - -@article{Messmann2020, - title = {How to Quantify Social Impacts in Strategic Supply Chain Optimization: {{State}} of the Art}, - author = {Messmann, Lukas and Zender, Victoria and Thorenz, Andrea and Tuma, Axel}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {257}, - pages = {120459}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120459} -} - -@article{meticResearchAvenuesUncovering2022, - title = {Research Avenues for Uncovering the Rebound Effects of the Circular Economy: {{A}} Systematic Literature Review}, - shorttitle = {Research Avenues for Uncovering the Rebound Effects of the Circular Economy}, - author = {Metic, Julija and Pigosso, Daniela C. A.}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {368}, - pages = {133133}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133133}, - urldate = {2022-08-05}, - abstract = {Circular Economy (CE) has gained great traction over the past few years and is increasingly seen as a way to achieve sustainable development. However, the implementation of CE initiatives often leads to rebound effects (RE), which limits the sustainability potential of CE. Despite the vast literature on rebound effects across several disciplines, such as ecological economics and industrial ecology, there is still a limited understanding regarding the occurrence of rebound effects within a CE context. This paper provides a systematic literature review (SLR) of RE with a particular focus on: (i) definitions; (ii) triggers and drivers; (iii) types and mechanisms; and (iv) measurement approaches. On the basis of the results of the SLR, a conceptual framework of RE is proposed. Furthermore, several gaps for RE research within CE have been identified and lead to the proposition of a number of potential research avenues: (1) expand the research scope and level of analysis to a systemic view; (2) enhance the understanding of RE triggered not only by efficiency, but also effectiveness and sufficiency; (3) expand the time horizon considered for the analysis, so to account for possible delays in the system; (4) deepen the understanding of the relationships between RE and all sustainability dimensions; (5) strengthen the research on the meso level; (6) account for the importance of system structure and system behaviour in the occurrence of RE; (7) model the causal dynamic relationships between important variables to anticipate the potential occurrence of RE; (8) develop robust approaches to estimate the potential RE triggered by CE initiatives. By consolidating the state-of-the-art within RE research and identifying the research directions for exploring RE within CE, this paper establishes a solid foundation for future research in the field.}, - langid = {english}, - keywords = {Circular economy,Rebound effect,Sustainability,System thinking}, - file = {/Users/fabio/Zotero/storage/W8C6VUKR/Metic_Pigosso_2022_Research avenues for uncovering the rebound effects of the circular economy.pdf;/Users/fabio/Zotero/storage/F3MRFJS6/S0959652622027226.html} -} - -@article{Metz2020, - title = {Scenario Development as Valuation: {{Opportunities}} for Reflexivity}, - author = {Metz, Ashley and Hartley, Paul}, - year = {2020}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {155}, - pages = {120027}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120027}, - urldate = {2020-04-24}, - abstract = {Scenario development is a core component of foresight practitioners' and long-term planners' work. Practices play a critical role in shaping and reifying taken-for-granted structures and ideas, and as such deserve attention. In this paper, we conceptualize scenario building as a practice of valuation. Doing so calls attention to constructive elements and highlights the importance of studying the practice and the field, not only to derive best practices, but to understand how they work and to what potential consequences. We illustrate these ideas with a scenario development consulting project for an international infrastructure company in which we alter the method in three main places: scanning, interim scenario work and scenario development. We demonstrate how conscious attention to the practice can drive subtle shifts in practice and how a `valuation lens' encourages reflexivity about the use of practices.}, - keywords = {Reflexivity,Scenario as valuation,Scenario development,Scenario planning,Scenarios,Valuation} -} - -@article{Meyer2003, - title = {Episodes of {{Collective Invention}}}, - author = {Meyer, Peter B.}, - year = {2003}, - month = aug, - journal = {SSRN Electronic Journal}, - issn = {1556-5068}, - doi = {10.2139/ssrn.466880}, - urldate = {2013-10-07}, - abstract = {The process of developing a new technology through open discussion has been called collective invention. This paper documents two episodes of collective invention and proposes a general model based on search theory. The first episode deals with the development of mass production steel in the U.S. (1866-1885), and the second with early personal computers (1975-1985). In both cases technical people openly discussed and sometimes shared technology they were developing. Both technologies advanced to the point that they supported substantial economic growth. Open source software development is partway through a similar process now. The episodes have common features. The process begins with an invention or a change in legal restrictions. Hobbyists and startup firms experiment with practical methods of production and share their results through a social network. The members of the network form a new industry or change an existing one. The network then disappears if the new firms keep their research and development secret. A model of the search for innovations can describe this process if it is expanded to include independent hobbyists and consultants as well as profit-seeking firms.}, - keywords = {collaboration,collective invention,innovation,knowledge,networks,search,technology} -} - -@article{Meyer2007, - title = {Network of {{Tinkerers}}: {{A Model}} of {{Open-Source Technology Innovation}}}, - author = {Meyer, Benjamin Peter}, - year = {2007}, - journal = {U.S. Bureau of Labor Statistics} -} - -@article{Meyer2019, - title = {The Emergence of an Envisioned Future. {{Sensemaking}} in the Case of ``{{Industrie}} 4.0'' in {{Germany}}}, - author = {Meyer, Uli}, - year = {2019}, - month = mar, - journal = {Futures}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.03.001} -} - -@article{Meyer2021, - title = {Experimenting and Documenting Low Tech}, - author = {Meyer, Morgan}, - year = {2021}, - month = apr, - journal = {Technology Analysis and Strategic Management}, - pages = {1--12}, - publisher = {{Morgan Meyer}}, - issn = {14653990}, - doi = {10.1080/09537325.2021.1914834}, - urldate = {2021-04-23}, - abstract = {How are low techs experimented with and how are they documented? Based on a study of the Low-tech Lab, this paper shows that documentation mobilises different practices and various formats: tutorials that present `cookbook recipes' for low techs, reports that assess experimentations in a scientific way, and videos that stage low techs as key actors in ecological lifestyles and part of modern adventures. The paper shows that documents not only record how low techs are experimented with, but that they also demonstrate that they are worth living with. It describes how literary technologies are entangled with technologies of affect, thereby positioning low techs at once as doable, reasonable and desirable.}, - keywords = {affect,documentation,experimentation,Low tech,tutorials}, - file = {/Users/fabio/Zotero/storage/CYCKAWUM/full-text.pdf} -} - -@article{meysCircularEconomyPlastic2020, - title = {Towards a Circular Economy for Plastic Packaging Wastes \textendash{} the Environmental Potential of Chemical Recycling}, - author = {Meys, Raoul and Frick, Felicitas and Westhues, Stefan and Sternberg, Andr{\'e} and Klankermayer, J{\"u}rgen and Bardow, Andr{\'e}}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105010}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105010}, - urldate = {2020-07-20}, - file = {/Users/fabio/Zotero/storage/GKI5IBL9/full-text.pdf} -} - -@article{Mezghani1998, - title = {High Speed Melt Spinning of Poly({{L-lactic}} Acid) Filaments}, - author = {Mezghani, Khaled and Spruiell, J E}, - year = {1998}, - month = apr, - journal = {Journal of Polymer Science Part B: Polymer Physics}, - volume = {36}, - number = {6}, - pages = {1005--1012}, - issn = {0887-6266}, - doi = {10.1002/(SICI)1099-0488(19980430)36:6<1005::AID-POLB9>3.0.CO;2-V}, - urldate = {2014-09-12}, - keywords = {fiber formation,melt spinning,polylactide}, - file = {/Users/fabio/Zotero/storage/WWF5RLLM/Mezghani, Spruiell - 1998 - High speed melt spinning of poly(L-lactic acid) filaments.pdf} -} - -@article{mgusenbauerWhichAcademicSearch2020, - title = {Which Academic Search Systems Are Suitable for Systematic Reviews or Meta-Analyses? {{Evaluating}} Retrieval Qualities of {{Google Scholar}}, {{PubMed}}, and 26 Other Resources}, - author = {M Gusenbauer, NR Haddaway}, - year = {2020}, - month = mar, - journal = {Res Synth Methods}, - volume = {11}, - number = {2}, - pages = {181--217}, - publisher = {{John Wiley and Sons Ltd}}, - doi = {10.1002/jrsm.1378}, - urldate = {2021-07-15}, - abstract = {Rigorous evidence identification is essential for systematic reviews and meta-analyses (evidence syntheses) because the sample selection of relevant studies determines a review's outcome, validity, and explanatory power. Yet, the search systems allowing access to this evidence provide varying levels of precision, recall, and reproducibility and also demand different levels of effort. To date, it remains unclear which search systems are most appropriate for evidence synthesis and why. Advice on which search engines and bibliographic databases to choose for systematic searches is limited and lacking systematic, empirical performance assessments. This study investigates and compares the systematic search qualities of 28 widely used academic search systems, including Google Scholar, PubMed, and Web of Science. A novel, query-based method tests how well users are able to interact and retrieve records with each system. The study is the first to show the extent to which search systems can effectively and efficiently perform (Boolean) searches with regards to precision, recall, and reproducibility. We found substantial differences in the performance of search systems, meaning that their usability in systematic searches varies. Indeed, only half of the search systems analyzed and only a few Open Access databases can be recommended for evidence syntheses without adding substantial caveats. Particularly, our findings demonstrate why Google Scholar is inappropriate as principal search system. We call for database owners to recognize the requirements of evidence synthesis and for academic journals to reassess quality requirements for systematic reviews. Our findings aim to support researchers in conducting better searches for better evidence synthesis.}, - keywords = {academic search systems,discovery,evaluation,information retrieval,systematic review,systematic search}, - file = {/Users/fabio/Zotero/storage/9YFFGKQ8/full-text.pdf} -} - -@article{Mhatre2021, - title = {A Systematic Literature Review on the Circular Economy Initiatives in the {{European Union}}}, - author = {Mhatre, Purva and Panchal, Rohit and Singh, Anju and Bibyan, Shyam}, - year = {2021}, - month = apr, - journal = {Sustainable Production and Consumption}, - volume = {26}, - pages = {187--201}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.09.008}, - urldate = {2020-10-31}, - abstract = {The circular economy (CE) paradigm fosters to rethink and redesign the manufacturing process, usage and disposal pattern of products and services in an economy. In the past few years, CE has gained tremendous momentum in terms of research and implementation. Apart from the widening horizon of CE across the globe, numerous practitioners, policy-makers and academicians have explored the scope to incorporate various sectors of industries and businesses within the CE model. Evidently, a primary mechanism or system is required to facilitate the transition to CE. With an aim to understand this mechanism, the article analyzes, through a systematic literature review, the implementation of circular practices across the European Union (EU) member states based on a framework of circular strategies, nutrient cycles, ReSOLVE framework and circular business models. Further, the implementation of CE action plan proposed in 2015 for the EU region, has facilitated circular practices in numerous industries, owing to government policies and regulations. Additionally, it has helped in building the required infrastructure, while providing a technological push for augmenting sustainable growth in the region. Based on the analysis, it is inferred that recycling has been the most widely used circular strategy for looping back materials into the system. Waste management, electrical and electronic equipment industries and construction industries are a pioneer in CE implementation. Also, macro level initiatives by governments and/or regional administrative bodies predominate CE's implementation in the EU. A further transition to CE can be facilitated by government policies, infrastructure and technological availability, awareness, stakeholder collaboration and supply-chain integration.}, - keywords = {Circular business models,Circular economy,European,Nutrient cycles,ReSOLVE framework,Union CE strategies}, - file = {/Users/fabio/Zotero/storage/3QNQMQ9B/full-text.pdf} -} - -@article{Mi2019, - title = {A New Perspective to Promote Organizational Citizenship Behaviour for the Environment: {{The}} Role of Transformational Leadership}, - author = {Mi, Lingyun and Gan, Xiaoli and Xu, Ting and Long, Ruyin and Qiao, Lijie and Zhu, Hanlin}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118002}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118002} -} - -@article{Miafodzyeva2013, - title = {Recycling Behaviour among Householders: {{Synthesizing}} Determinants via a Meta-Analysis}, - author = {Miafodzyeva, S. and Brandt, N.}, - year = {2013}, - journal = {Waste and Biomass Valorization}, - volume = {4}, - number = {2}, - pages = {221--235}, - issn = {18772641}, - doi = {10.1007/s12649-012-9144-4}, - abstract = {A meta-analysis was made of results from previous studies on different variables influencing and determining the recycling behaviour of householders. These studies were conducted by researchers working in various fields in a number of different countries and are published in diverse journals. We evaluated trends in research outputs in the period 1990\textendash 2010, during which the provision of recycling facilities to householders has greatly expanded and requirements have become more extensive and often more complex. Variables affecting the recycling behaviour of householders were classified into four theoretical groups: socio-psychological, technical-organisational, individual socio-demographic and study-specific. These groups (clusters) were identified in a meta-analysis of 63 empirical studies culled from published research. The strongest predictors of householders' recycling behaviour were identified as being convenience, moral norms, information and environmental concern. The theoretical framework developed can be used to formulate questionnaires and in data analysis.}, - isbn = {1264901291}, - keywords = {Household waste,Meta-analysis,Motivation,Recycling behaviour}, - file = {/Users/fabio/Zotero/storage/QPV9HUH4/Recycling behaviour among householders Synthesizing determinants via a meta-analysis.pdf} -} - -@book{Michaeli1984, - title = {Extrusion Dies: Design and Engineering Computations}, - author = {Michaeli, Walter}, - year = {1984}, - publisher = {{Hanser Munich}} -} - -@patent{MichaelJ.CimaJohnS.HaggertyEmanuelM.Sachs1993, - ids = {Sachs1993a}, - title = {Three-Dimensional Printing Techniques}, - author = {Cima, Michael J. and Haggerty, John S. and Sachs, Emanuel M. and Williams, Paul A.}, - year = {1993}, - month = apr, - publisher = {{MIT}}, - address = {{USA}}, - urldate = {2014-01-31}, - abstract = {A process for making a component by depositing a first layer of a fluent porous material, such as a powder, in a confined region and then depositing a binder material to selected regions of the layer of powder material to produce a layer of bonded powder material at the selected regions. Such steps are repeated a selected number of times to produce successive layers of selected regions of bonded powder material so as to form the desired component. The unbonded powder material is then removed. In some cases the component may be further processed as, for example, by heating it to further strengthen the bonding thereof.} -} - -@article{Michelini2017, - ids = {michelini2017}, - title = {From {{Linear}} to {{Circular Economy}}: {{PSS Conducting}} the {{Transition}}}, - author = {Michelini, Gustavo and Moraes, Renato N. and Cunha, Renata N. and Costa, Janaina M.H. and Ometto, Aldo R.}, - year = {2017}, - journal = {Procedia CIRP}, - volume = {64}, - pages = {2--6}, - publisher = {{The Author(s)}}, - issn = {22128271}, - doi = {10.1016/j.procir.2017.03.012}, - abstract = {It is a consensus that we are passing by a period of severe natural resource depletion. Our current linear socioeconomic system, characterized by the product discard at the end of product life, is one of the main causes of this natural depletion. Some governs and institution, as European Union [3] and The Ellen MacArthur Foundation [1], are calling for a new economic model, as can be seen on the Europe 2020 strategy [4]: "the Europe Union has no choice but to go for the transition to a resource-efficient and ultimately regenerative circular economy". This highlights the trend for a circular economy, characterized by restoration and circularity of product components. It is a response to the inefficient management of the resources in the traditional linear model. To support this transition from a linear to a circular economy, business managers rely on new business models be developed. Product-Service System (PSS) is considered a business model that integrates products and services with the aim of fulfilling customer's needs. The objective of this study is to identify if PSS can be used as a business model for firms achieve resource-efficiency through circular economy. This study constitute a literature review and a bibliometric analysis about PSS and circular economy.}, - isbn = {22128271 (ISSN)}, - keywords = {circular economy,product-service systems,PSS,sustaintable business model}, - file = {/Users/fabio/Zotero/storage/XB9SA9MX/From Linear to Circular Economy- PSS Conducting the Transition.pdf} -} - -@article{Micolier2019, - title = {To What Extent Can Agent-Based Modelling Enhance a Life Cycle Assessment? {{Answers}} Based on a Literature Review}, - author = {Micolier, Alice and Loubet, Philippe and Taillandier, Franck and Sonnemann, Guido}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118123}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118123} -} - -@article{miedzinskiPavingPathwaysSustainable2022, - title = {Paving the Pathways towards Sustainable Future? {{A}} Critical Assessment of {{STI}} Policy Roadmaps as Policy Instruments for Sustainability Transitions}, - shorttitle = {Paving the Pathways towards Sustainable Future?}, - author = {Miedzinski, M. and McDowall, W. and Fahnestock, J. and Rataj, O. and Papachristos, G.}, - year = {2022}, - month = sep, - journal = {Futures}, - volume = {142}, - pages = {103015}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2022.103015}, - urldate = {2022-08-10}, - abstract = {Roadmaps and roadmapping techniques receive increasing attention in the Science, Technology and Innovation policy community, notably for the development of strategies and policies to address societal challenges and ambitious goals such as the SDGs. STI policy roadmaps are used to evoke future visions, align actor expectations and formulate, document, plan and implement public policies for long-term, ambitious sustainability goals. As a sophisticated strategic planning process, roadmapping seems appropriate for policy support aiming to foster sustainability transitions. Nevertheless, there is little research on the role and limitations of roadmaps as a policy instrument to support innovation for sustainability transitions. This paper critically assesses selected national and international policy and sectoral roadmaps that focus on technology areas and societal challenges relevant to sustainability and energy transitions. The assessment of the objectives, design features and embeddedness of roadmaps in policy processes shows that current policy roadmaps have several shortfalls. The paper outlines knowledge gaps and research priorities to understand how such limitations might be overcome and draws tentative lessons for future applications of roadmaps as policy instruments for sustainability transitions.}, - langid = {english}, - keywords = {policy instruments,Policy roadmaps,Roadmapping,{science, technology and innovation policy},SDGs,strategic planning,transition pathways}, - file = {/Users/fabio/Zotero/storage/BRHRDS35/Miedzinski et al_2022_Paving the pathways towards sustainable future.pdf;/Users/fabio/Zotero/storage/I48A5ZYI/S001632872200115X.html} -} - -@article{miesMappingSocialDimension2021, - title = {Mapping the Social Dimension of the Circular Economy}, - author = {Mies, Annika and Gold, Stefan}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {321}, - pages = {128960}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128960}, - urldate = {2021-09-21} -} - -@article{Mihelcic2003, - title = {Sustainability Science and Engineering: {{The}} Emergence of a New Metadiscipline}, - author = {Mihelcic, J R and Crittenden, J C and Small, M J and Shonnard, D R and Hokanson, D R and Zhang, Q and Chen, H and a Sorby, S and James, V U and Sutherland, J W and Schnoor, J L}, - year = {2003}, - journal = {Environmental Science \& Technology}, - volume = {37}, - number = {23}, - pages = {5314--5324}, - issn = {0013-936X}, - doi = {Doi 10.1021/Es034605h}, - abstract = {A case is made for growth of a new metadiscipline of sustainability science and engineering. This new field integrates industrial, social, and environmental processes in a global context. The skills required for this higher level discipline represent a metadisciplinary endeavor, combining information and insights across multiple disciplines and perspectives with the common goal of achieving a desired balance among economic, environmental, and societal objectives. Skills and capabilities that are required to support the new metadiscipline are summarized. Examples of integrative projects are discussed in the areas of sustainability metrics and integration of industrial, societal, and environmental impacts. It is clear that a focus on green engineering that employs pollution prevention and industrial ecology alone are not sufficient to achieve sustainability, because even systems with efficient material and energy use can overwhelm the carrying capacity of a region or lead to other socially unacceptable outcomes.}, - isbn = {0013-936X}, - pmid = {14700315}, - keywords = {model,products,risk,voc recovery}, - file = {/Users/fabio/Zotero/storage/8JPQKREK/Sustainability science and engineering The emergence of a new metadiscipline.pdf} -} - -@inproceedings{Mikela2011, - title = {Review on {{Living Labs}}. {{Their}} Predecessors , Their Principles and the Diversity of Their Applications.}, - booktitle = {{{COLLA}} 2011 : {{The First International Conference}} on {{Advanced Collaborative Networks}}, {{Systems}} and {{Applications Review}}}, - author = {Mikela, Chatzimichailidou Maria and Lukac, Dusko}, - year = {2011}, - pages = {28--33}, - abstract = {In this paper, we are going to present the Living Lab concept. Through the last few years, many researchers have been arguing about this controversial term. Thus, there is a plethora of definitions been given to them and many case studies have been conducted, so as to conclude to a generally accepted explanation of this marketing phenomenon. The Living Lab (LL) theory is based on an Open Innovation ground and it co-exists with other marketing and production strategies such as Mass Customization, Open Source, Open Evaluation, Lean Production and so on, aiming to cover customers desires as much as possible. More and more organizations are confronted with highly dynamic external ecosystems. This notion is not an optional activity, but it stems from the fact that consumers seem to be more sophisticated and demanding about what fits their needs better. Colossal companies apply or even, are willing to adapt, these new ways of thinking. Moreover, European countries have already detected the emerging needs leading to the establishment the European Network of Living Labs (ENoLL). In periods of economic recession, innovation prevails and companies need to change their minds and be more ``open'' and conciliatory. The purpose of this shift is to utilize the majority of information deriving from all kinds of users. Till now, Marketing departments emphasize in approaching only the lead-users. Due to the fact that neither personalization nor customization was discerned, a vast amount of customers were unsatisfied. To conclude, users should have a dual action: they should be both innovators and developers. This will assist products and services to become more adaptive in real markets.}, - isbn = {978-1-61208-143-4}, - keywords = {living labs,Mass Customization,open innovation,openness} -} - -@article{Mikhak2002, - title = {Fab {{Lab}} : An {{Alternate Model}} of {{Ict}} for {{Development}}}, - author = {Mikhak, Bakhtiar and Lyon, Christopher and Gorton, Tim and Gershenfeld, Neil and Mcennis, Caroline and Taylor, Jason}, - year = {2002}, - journal = {Development by Design (DYD02)}, - pages = {1--7}, - issn = {0006-8993}, - abstract = {There is a growing sense that the Digital Divide and the role of Information and Communications Technology (ICT) in international development need to be fundamentally reconceptualized. This paper presents the composition and the rationale behind the creation of a network of fabrication laboratories, FAB LABs, whose mission is to provide concrete examples that would lay the foundation for a new framework for this reconceptualization. At the heart of this idea is the belief that the most sustainable way to bring the deepest results of the digital revolution to developing communities is to enable them to participate in creating their own technological tools for finding solutions to their own problems. Each FAB LAB consists of a collection of tools for design and modeling, prototyping and fabrication, instrumentation and testing and debugging, and and documentation for a wide range of applications in formal and informal education, health environmental monitoring, as well as economic and social development.}, - pmid = {460}, - keywords = {a,figure 1,in maharashtra,in vigyan ashram,india,just outside,small educational community located,the fab lab site,the village of pabal}, - file = {/Users/fabio/Zotero/storage/6GVCQJKE/FAB LAB- AN ALTERNATE MODEL OF ICT FOR DEVELOPMENT.pdf} -} - -@article{Mikula2020, - title = {{{3D}} Printing Filament as a Second Life of Waste Plastics\textemdash a Review}, - author = {Mikula, Katarzyna and Skrzypczak, Dawid and Izydorczyk, Grzegorz and Warcho{\l}, Jolanta and Moustakas, Konstantinos and Chojnacka, Katarzyna and {Witek-Krowiak}, Anna}, - year = {2020}, - month = sep, - journal = {Environmental Science and Pollution Research}, - issn = {0944-1344}, - doi = {10.1007/s11356-020-10657-8}, - urldate = {2020-09-11}, - abstract = {In recent times, the issue of plastic recycling has become one of the leading issues of environmental protection and waste management. Polymer materials have been found an application in many areas of daily life and industry. Along with their extended use, the problem of plastic wastes appeared because, after withdrawal from use, they became persistent and noxious wastes. The possibility of reusing polymeric materials gives a possibility of valorization-a second life-and enables effective waste utilization to obtain consumable products. The 3D printing market is a well-growing sector. Printable filaments can be made from a variety of thermoplastic materials, including those from recycling. This paper focuses on a review of the available literature on the production of filaments for 3D printers from recycled polymers as the alternative to present approach of central selective collection of plastics. The possibility of recycling of basic thermoplastic materials and the impact of processing on their physicochemical and mechanical properties were verified (Lanzotti et al. 2019). In addition, commercially available filaments produced from recycled materials and devices which allow self-production of filaments to 3D printing from plastic waste were reviewed.}, - keywords = {3D printing,Extruder,Filament,Plastic,Polymer,Recycling,Waste management}, - file = {/Users/fabio/Zotero/storage/CIK7IQSC/full-text.pdf} -} - -@article{Milbrandt2022, - title = {Quantification and Evaluation of Plastic Waste in the {{United States}}}, - author = {Milbrandt, Anelia and Coney, Kamyria and Badgett, Alex and Beckham, Gregg T.}, - year = {2022}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {183}, - pages = {106363}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2022.106363}, - urldate = {2022-05-23}, - abstract = {A R T I C L E I N F O Keywords: Plastic waste Landfilled plastic waste Plastic waste value Plastic waste management United States A B S T R A C T To develop viable solutions for reducing plastic waste, spatially explicit data on the management of these materials are critical. Here we employ statistical and geospatial methods to present a comprehensive assessment of plastic waste in the United States by resin type at the state, county, and local levels. Of the estimated 44 Mt of plastic waste managed in 2019 domestically, approximately 86\% was landfilled, 9\% was combusted, and 5\% was recycled. Landfilled plastics represented significant losses to the country's economy in 2019: an average of US \$7.2 billion in market value, about 3.4 EJ as embodied energy (equivalent to 12\% of energy consumption by the industrial sector), and 1.5 EJ as an energy source (equivalent to 5.5\% and 5\% of energy consumption by the industrial and transportation sectors, respectively). Lastly, we posit that substantial amount of landfilled plastic waste could be recovered through advanced sorting, existing, and emerging recycling processes.} -} - -@article{milcuCulturalEcosystemServices2013, - title = {Cultural {{Ecosystem Services}}: {{A Literature Review}} and {{Prospects}} for {{Future Research}}}, - author = {Milcu, Andra Ioana and Hanspach, Jan and Abson, David and Fischer, Joern}, - year = {2013}, - volume = {18}, - number = {3}, - publisher = {{and Society}}, - doi = {10.5751/ES-05790-180344}, - urldate = {2021-04-23}, - keywords = {aesthetic values,bundling,CES valuation,cluster analysis,cultural heritage,cultural landscapes,drivers of change,intangible benefits,landscape values,nonuse values,policy implications,recreation and ecotourism}, - file = {/Users/fabio/Zotero/storage/2C478JUX/m-api-33119014-24ff-9cb1-655b-00f95a043fcc.pdf} -} - -@article{milesTaxonomyResearchGaps2017, - title = {A {{Taxonomy}} of {{Research Gaps}}: {{Identifying}} and {{Defining}} the {{Seven Research Gaps}}}, - author = {Miles, D Anthony}, - year = {2017}, - pages = {11}, - abstract = {The significance of this article is twofold. First, this research provides theoretical significance by developing a theoretical model on research gaps. Second, this research attempts to build a solid taxonomy on the different characteristics of research gaps and establish a foundation. The implication for researchers is that research gaps should be structured and characterized based on their functionality. Thus, this provides researchers with a basic framework for identifying them in the literature investigation.}, - langid = {english}, - file = {/Users/fabio/Downloads/Miles2017.pdf} -} - -@article{milicevicElearningPerspectivesHigher2021, - title = {E-Learning Perspectives in Higher Education Institutions}, - author = {MILI{\'C}EVI{\'C}, Violeta and DENI{\'C}, Neboj{\v s}a and MILI{\'C}EVI{\'C}, Zoran and ARSI{\'C}, Ljiljana and {SPASI{\'C}-STOJKOVI{\'C}}, Milica and PETKOVI{\'C}, Dalibor and STOJANOVI{\'C}, Jelena and Krkic, Mirjana and Milovan{\v c}evi{\'c}, Nata{\v s}a Sokolov and Jovanovi{\'c}, Aleksandra}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120618}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120618}, - urldate = {2021-02-14}, - abstract = {Use of modern ICT in education enabled a special type of studying known as distance learning. This form of learning needs to provide the level of knowledge and competences corresponding to the traditional learning. The basic value of this form of learning is that it enables learning anytime, anywhere in the world, with the intensity selected by the students themselves, etc. Although this form of learning is in frequent use all over the world, only 18 higher education institutions in the Republic of Serbia accredited at least one study program for distance learning. This paper focuses on the faculties within the University of Pri\v{s}tina temporary settled in Kosovska Mitrovica, and the aim of the paper is to analyze the present status of the use of e-learning on these faculties. The special focus is on the analysis of potential options for accreditation of the e-learning study programs at these faculties.}, - keywords = {Distance learning,E-learning,Higher education institutions,ICT} -} - -@article{Milios2018, - title = {Plastic Recycling in the {{Nordics}}: {{A}} Value Chain Market Analysis}, - author = {Milios, Leonidas and Holm Christensen, Lena and McKinnon, David and Christensen, Camilla and Rasch, Marie Katrine and Hallstr{\o}m Eriksen, Mikael}, - year = {2018}, - month = jun, - journal = {Waste Management}, - volume = {76}, - pages = {180--189}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2018.03.034}, - file = {/Users/fabio/Zotero/storage/3GRAMUXU/Plastic recycling in the Nordics- A value chain market analysis.pdf} -} - -@article{Milios2018a, - ids = {milios2018}, - title = {Advancing to a {{Circular Economy}}: Three Essential Ingredients for a Comprehensive Policy Mix}, - author = {Milios, Leonidas}, - year = {2018}, - month = may, - journal = {Sustainability Science}, - volume = {13}, - number = {3}, - pages = {861--878}, - publisher = {{Springer Japan}}, - issn = {1862-4065}, - doi = {10.1007/s11625-017-0502-9}, - abstract = {Material resources exploitation and the pressure on natural ecosystems have raised concerns over potential future resource risks and supply failures worldwide. Interest in the concept of Circular Economy has surged in recent years among policy makers and business actors. An increasing amount of literature touches upon the concep- tualisation of Circular Economy, the development of `cir- cular solutions' and circular business models, and policies for a Circular Economy. However, relevant studies on resource efficiency policies mostly utilise a case-by-case or sector-by-sector approach and do not consider the systemic interdependencies of the underlying operational policy framework. In this contribution, a mapping of the existing resource policy framework in the European Union (EU) is undertaken, and used as a basis for identifying policy areas that have been less prominent in influencing material resource efficiency. Employing a life cycle approach, policies affecting material efficiency in the production and consumption stages of a product have been found to be poorly utilised so far in the EU. Taking this as a point of departure, three policy areas that can contribute to closing material loops and increasing resource efficiency are thoroughly discussed and their application challenges are highlighted. The three policy areas are: (1) policies for reuse, repair and remanufacturing; (2) green public pro- curement and innovation procurement; and (3) policies for Handled by Fabio Orecchini, Department of Sustainability Engineering, Italy. \& Leonidas Milios leonidas.milios@iiiee.lu.se 1 International Institute for Industrial Environmental Economics, Lund University, P. O. Box 196, Tegnersplatsen 4, 221 00 Lund, Sweden improving secondary materials markets. Finally, a potential policy mix, including policy instruments from the three mentioned policy areas\textemdash together with policy mixing principles\textemdash is presented to outline a possible pathway for transitioning to Circular Economy policy making.}, - isbn = {18624065 (ISSN)}, - keywords = {Circular Economy,Policy,Resource efficiency}, - file = {/Users/fabio/Zotero/storage/MW8H8UTB/Advancing to a Circular Economy- three essential ingredients for a comprehensive policy mix.pdf} -} - -@article{Milios2018b, - title = {Sustainability {{Impact Assessment}} of {{Increased Plastic Recycling}} and {{Future Pathways}} of {{Plastic Waste Management}} in {{Sweden}}}, - author = {Milios, Leonidas and Esmailzadeh Davani, Aida and Yu, Yi}, - year = {2018}, - month = jul, - journal = {Recycling}, - volume = {3}, - number = {3}, - pages = {33}, - publisher = {{MDPI AG}}, - issn = {2313-4321}, - doi = {10.3390/recycling3030033}, - urldate = {2020-03-12}, - abstract = {Plastic is a versatile material that has contributed to numerous product innovations and convenience in everyday life. However, plastic production is growing at an alarming rate, and so has the generation of plastic waste. Unsound waste management results in plastic leakage to the environment with multiple adverse effects to ecosystems. Incineration of plastic waste produces excessive greenhouse gas (GHG) emissions, while plastic as a material is consumed and cannot be used again as a resource within a circular economy framework. For this reason, the European Union (EU) takes measures to increase plastic recycling, introducing higher targets for recycling in its revised waste legislation. Sweden follows suit, prioritising actions for improving the management of plastic waste. In this contribution, three scenarios of future plastic waste management are analysed for their sustainability impacts by 2030. The analysis is enabled by a plastic waste management flow model that calculates environmental, economic, and social impacts. The indicators used in the model to describe the impacts in each axis of sustainability are (1) GHG emissions, (2) monetary costs and benefits, and (3) number of jobs created. The results indicate several trade-offs between the different scenarios and between the different sustainability aspects of future plastic waste management, with their strengths and weaknesses duly discussed. Concluding, the most promising and sustainable future scenario for plastic waste management in Sweden includes high targets for recycling\textemdash in line with EU targets\textemdash and a gradual phase-out of plastic incineration as a waste management option.}, - keywords = {Plastic recycling,Plastic waste,Recycling targets,Sustainability assessment}, - file = {/Users/fabio/Zotero/storage/Q8LLPUI7/full-text.pdf} -} - -@article{Millette2019, - title = {Materials Flow Analysis in Support of Circular Economy Development: {{Plastics}} in {{Trinidad}} and {{Tobago}}}, - author = {Millette, Sherwyn and Williams, Eric and Hull, Clyde Eir{\'i}kur}, - year = {2019}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {150}, - number = {November 2018}, - pages = {104436}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104436}, - keywords = {material fl ow analysis}, - file = {/Users/fabio/Zotero/storage/B625I5UJ/Materials flow analysis in support of circular economy development- Plastics in Trinidad and Tobago.pdf} -} - -@article{millward-hopkinsBackFutureOld2021, - title = {Back to the {{Future}}: Old Values for a New (More Equal) World}, - author = {{Millward-Hopkins}, Joel}, - year = {2021}, - month = mar, - journal = {Futures}, - volume = {128}, - pages = {102727}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102727}, - urldate = {2021-03-08}, - file = {/Users/fabio/Zotero/storage/B7BKD7RF/full-text.pdf} -} - -@inproceedings{minetolaMechanicalPerformancePolylactic2021, - title = {Mechanical Performance of Polylactic Acid from Sustainable Screw-Based 3d Printing}, - booktitle = {Smart {{Innovation}}, {{Systems}} and {{Technologies}}}, - author = {Minetola, Paolo and Fontana, Luca and Arrigo, Rossella and Malucelli, Giulio and Iuliano, Luca}, - year = {2021}, - volume = {200}, - pages = {531--542}, - publisher = {{Springer Science and Business Media Deutschland GmbH}}, - issn = {21903026}, - doi = {10.1007/978-981-15-8131-1_47}, - urldate = {2021-05-20}, - abstract = {Screw-extrusion-based 3D printing or fused granular fabrication (FGF) is a less widespread variant of filament-based 3D printing for polymers. An FGF printer can be fed directly from polymer granules for improved sustainability. Shorter manufacturing routes and the potential of using recycled pellets from waste plastics are key features of FGF in the circular economy framework. A modified version of a standard Prusa i3 plus printer, which was equipped with a Mahor screw extruder, is used to test the mechanical performance of polylactic acid (PLA) processed with different layer infill and printing speed. Rheological and thermal analyses are carried out to characterise the material. The energy consumption of the FGF printer was measured during the fabrication of Dumbbell specimens. Tensile test results are consistent with other investigations presented in the literature. A higher printing speed promotes FGF eco-efficiency without a detrimental effect on the material strength, whereas lower printing speed should be preferred for increased material stiffness.}, - isbn = {9789811581304}, - keywords = {3D printing,Pellets,PLA} -} - -@book{Mining2009, - title = {The {{Elements}} of {{Statistical Learning}}}, - author = {Mining, Data}, - year = {2009}, - journal = {The Mathematical Intelligencer}, - volume = {27}, - publisher = {{Springer New York}}, - address = {{New York, NY}}, - issn = {03436993}, - doi = {10.1007/b94608}, - abstract = {During the past decade there has been an explosion in computation and information technology. With it has come a vast amount of data in a variety of fields such as medicine, biology, finance, and marketing. The challenge of understanding these data has led to the development of new tools in the field of statistics, and spawned new areas such as data mining, machine learning, and bioinformatics. Many of these tools have common underpinnings but are often expressed with different terminology. This book describes the important ideas in these areas in a common conceptual framework. While the approach is statistical, the emphasis is on concepts rather than mathematics.}, - isbn = {978-0-387-84857-0}, - pmid = {15512507}, - file = {/Users/fabio/Zotero/storage/LCHD94C2/m-api-3e8e59eb-6394-f231-50f1-ce0e8441037b.pdf} -} - -@article{MinisteredelaTransitionEcologiqueetSolidaire2018, - title = {Feuille de Route {{\'Economie}} Circulaire {{Comment}} Am\'eliorer Notre Collecte Des D\'echets ?}, - author = {{Minist\`ere de la Transition Ecologique et Solidaire}}, - year = {2018}, - file = {/Users/fabio/Zotero/storage/SJP3TTF4/Economie circulaire et collecte des déchets.pdf} -} - -@misc{MinisteredelEconomieetdesFinances2018, - title = {Feuille de Route \'Economie Circulaire ({{FREC}})}, - author = {{Minist\`ere de l'\'Economie et des Finances}}, - year = {2018}, - howpublished = {https://www.ecologique-solidaire.gouv.fr/feuille-route-economie-circulaire-frec}, - file = {/Users/fabio/Zotero/storage/4EY3TW3T/Feuille de Route Economie Circulaire.pdf} -} - -@article{MinistryoftheEnvironmentGovernmentofJapan2009, - title = {White Paper on the {{Environment}}}, - author = {{Ministry of the Environment Government of Japan}}, - year = {2009}, - file = {/Users/fabio/Zotero/storage/CWNVBKMS/White paper on the Environment.pdf} -} - -@article{mintzRightMetricsMarketingmix2020, - title = {The Right Metrics for Marketing-Mix Decisions}, - author = {Mintz, Ofer and Gilbride, Timothy J. and Lenk, Peter and Currim, Imran S.}, - year = {2020}, - month = aug, - journal = {International Journal of Research in Marketing}, - publisher = {{North-Holland}}, - issn = {01678116}, - doi = {10.1016/j.ijresmar.2020.08.003}, - urldate = {2020-08-24} -} - -@article{minunnoExploringEnvironmentalBenefits2020, - title = {Exploring Environmental Benefits of Reuse and Recycle Practices: {{A}} Circular Economy Case Study of a Modular Building}, - author = {Minunno, Roberto and O'Grady, Timothy and Morrison, Gregory M. and Gruner, Richard L.}, - year = {2020}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {160}, - pages = {104855}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104855}, - urldate = {2020-05-27} -} - -@article{Mirabella2013, - title = {Life Cycle Assessment of Bio-Based Products: A Disposable Diaper Case Study}, - author = {Mirabella, Nadia and Castellani, Valentina and Sala, Serenella}, - year = {2013}, - month = feb, - journal = {The International Journal of Life Cycle Assessment}, - volume = {18}, - number = {5}, - pages = {1036--1047}, - issn = {0948-3349}, - doi = {10.1007/s11367-013-0556-6}, - urldate = {2014-02-23}, - file = {/Users/fabio/Zotero/storage/ULJVXP9T/Mirabella, Castellani, Sala - 2013 - Life cycle assessment of bio-based products a disposable diaper case study.pdf} -} - -@article{Miranda2019, - title = {Open {{Innovation Laboratories}} as {{Enabling Resources}} to {{Reach}} the {{Vision}} of {{Education}} 4.0}, - author = {Miranda, Jhonattan and Lopez, Claudia S. and Navarro, Sergio and Bustamante, Martin R. and Molina, Jose Martin and Molina, Arturo}, - year = {2019}, - journal = {Proceedings - 2019 IEEE International Conference on Engineering, Technology and Innovation, ICE/ITMC 2019}, - doi = {10.1109/ICE.2019.8792595}, - abstract = {Through the years, the education sector has been influenced by the evolution of technology and the global, regional and local social dynamics. Therefore, today, teaching and learning methods include the use of emerging information and communication technologies (ICTs), advanced tools and innovative facilities. Also, teaching and learning methods are focused on developing desirable competencies in today's students to motivate them to propose solutions to the problems of today and the future. This new era has been known as Education 4.0. This paper describes how Open Innovation Laboratories are used as enabling resources to reach the vision of Education 4.0 and describes a case of implementation at the Tecnol\'ogico de Monterrey University in Mexico.}, - isbn = {9781728134017}, - keywords = {Education 4.0,ICTs,Industry 4.0,Internet of Things,Learning Methods,Open Innovation}, - file = {/Users/fabio/Zotero/storage/83HWBF8H/Open Innovation Laboratories as Enabling Resources to Reach the Vision of Education 4.0.pdf} -} - -@article{Mishra2019, - title = {Organizational Capabilities That Enable Big Data and Predictive Analytics Diffusion and Organizational Performance}, - author = {Mishra, Deepa and Luo, Zongwei and Hazen, Benjamin and Hassini, Elkafi and Foropon, Cyril}, - year = {2019}, - month = sep, - volume = {57}, - number = {8}, - pages = {1734--1755}, - issn = {0025-1747}, - doi = {10.1108/MD-03-2018-0324} -} - -@article{mishraBarriersAdoptionCircular2022, - title = {Barriers to the Adoption of Circular Economy Practices in {{Micro}}, {{Small}} and {{Medium Enterprises}}: {{Instrument}} Development, Measurement and Validation}, - author = {Mishra, Ruchi and Singh, Rajesh Kumar and Govindan, Kannan}, - year = {2022}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {351}, - pages = {131389}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131389}, - urldate = {2022-04-11} -} - -@misc{MITNews2016, - title = {3 {{Questions}}: {{Neil Gershenfeld}} and the Spread of {{Fab Labs}} | {{MIT News}} | {{Massachusetts Institute}} of {{Technology}}}, - author = {Chandler, David L.}, - year = {2016}, - journal = {MIT News}, - urldate = {2022-04-19}, - howpublished = {https://news.mit.edu/2016/3-questions-neil-gershenfeld-fab-labs-0104} -} - -@article{mkhontoImpactRuralSchoolBased2021, - title = {The {{Impact}} of a {{Rural School-Based Solid Waste Management Project}} on {{Learners}}' {{Perceptions}}, {{Attitudes}} and {{Understanding}} of {{Recycling}}}, - author = {Mkhonto, Busisiwe and Mnguni, Lindelani}, - year = {2021}, - month = nov, - journal = {Recycling 2021, Vol. 6, Page 71}, - volume = {6}, - number = {4}, - pages = {71}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - doi = {10.3390/RECYCLING6040071}, - urldate = {2021-11-07}, - abstract = {Continued environmental degradation necessitates innovative strategies to improve society's attitude towards and understanding of recycling solid waste. Previous research has shown that school-based projects integrated into the school curriculum could effectively enhance learners' knowledge of recycling and attitudes towards recycling. However, not much is known about the impact of such projects if they are driven by learners, particularly in under-resourced rural schools. Therefore, in the current research, we aimed to determine the impact of a school-based recycling project, integrated as practical work, on learners' understanding of recycling, their attitude towards recycling, and the perceived impact of the project on the school environment, in an under-resourced rural school. Our findings showed that participating in a rural school-based recycling project may not enhance Grade 7 Natural Sciences learners' perceptions of, attitudes towards, and understanding of recycling. We posit that various factors may affect the effectiveness of a recycling project. Further research is required to explore these factors further.}, - keywords = {attitudes,content knowledge,environmental education,recycling project,science learners}, - file = {/Users/fabio/Zotero/storage/XDA3VPJ7/full-text.pdf} -} - -@article{Modak2019, - title = {Analyzing a Socially Responsible Closed-Loop Distribution Channel with Recycling Facility}, - author = {Modak, Nikunja Mohan and Sinha, Sudipta and Panda, Shibaji and Kazemi, Nima}, - year = {2019}, - month = oct, - journal = {SN Applied Sciences}, - volume = {1}, - number = {10}, - pages = {1189}, - issn = {2523-3963}, - doi = {10.1007/s42452-019-1173-1} -} - -@misc{ModelingHousingUrban, - title = {Modeling the {{Housing}} and {{Urban Dynamics}}. {{Selected}} Papers on {{System Dynamics}}}, - urldate = {2022-05-28}, - howpublished = {http://www.atc-innova.com/09197.htm} -} - -@article{moesMecaniqueMilieuxContinus, - title = {{M\'ecanique des milieux continus}}, - author = {Mo{\"e}s, Nicolas}, - langid = {french}, - file = {/Users/fabio/Zotero/storage/D68AP5RT/Moës - Mécanique des milieux continus.pdf} -} - -@article{moetazedianMechanicalPerformance3D2020, - title = {Mechanical Performance of {{3D}} Printed Polylactide during Degradation}, - author = {Moetazedian, Amirpasha and Gleadall, Andrew and Han, Xiaoxiao and Ekinci, Alper and Mele, Elisa and Silberschmidt, Vadim V}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - pages = {101764}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101764}, - urldate = {2020-12-21} -} - -@article{Mogas-Soldevila2014, - title = {Water-{{Based Robotic Fabrication}}: {{Large-Scale Additive Manufacturing}} of {{Functionally Graded Hydrogel Composites}} via {{Multichamber Extrusion}}}, - author = {{Mogas-Soldevila}, Laia and {Duro-Royo}, Jorge and Oxman, Neri}, - year = {2014}, - journal = {3D Printing and Additive Manufacturing}, - volume = {1}, - number = {3}, - pages = {141--151}, - issn = {2329-7662}, - doi = {10.1089/3dp.2014.0014}, - abstract = {Abstract Additive manufacturing (AM) of regenerated biomaterials is in its infancy despite the urgent need for alternatives to fuel-based products and in spite of the exceptional mechanical properties, availability, and biodegradability associated with water-based natural polymers. This study presents water-based robotic fabrication as a design approach and enabling technology for AM of biodegradable hydrogel composites. Our research focuses on the combination of expanding the dimensions of the fabrication envelope, developing structural materials for additive deposition, incorporating material-property gradients, and manufacturing architectural-scale biodegradable systems. This work presents a robotically controlled AM system to produce biodegradable-composite objects combining natural hydrogels, such as chitosan and sodium alginate, with other organic aggregates. It demonstrates the approach by designing, building, and evaluating the mechanics and controls of a multichamber extrusion system. Finally, it...}, - isbn = {2329-7662}, - file = {/Users/fabio/Zotero/storage/FF9VNVXU/Mogas-Soldevila, Duro-Royo, Oxman - 2014 - Water-Based Robotic Fabrication Large-Scale Additive Manufacturing of Functionally Graded Hyd.pdf} -} - -@article{Mognol2006, - title = {Rapid Prototyping: Energy and Environment in the Spotlight}, - author = {Mognol, Pascal and Lepicart, Denis and Perry, Nicolas}, - year = {2006}, - month = jan, - journal = {Rapid Prototyping Journal}, - volume = {12}, - number = {1}, - pages = {26--34}, - issn = {1355-2546}, - doi = {10.1108/13552540610637246}, - abstract = {Purpose \textendash{} To discuss integration of the rapid prototyping environmental aspects with the primary focus on electrical energy consumption. Design/methodology/approach \textendash{} Various manufacturing parameters have been tested on three rapid prototyping systems: Thermojet (3DS), FDM 3000 (Stratasys) and EOSINT M250 Xtended (EOS). The objective is to select sets of parameters for reduction of electrical energy consumption. For this, a part is manufactured in several orientations and positions in the chamber of these RP systems. For each test, the electrical power is noted. Finally, certain rules are proposed to minimize this electrical energy consumption during a job. Findings \textendash{} It is important to minimize the manufacturing time but there is no general rule for optimization of electrical energy consumption. Each RP system must be tested with energy consumption considerations under the spotlight. Research limitations/implications \textendash{} The work is only based on rapid prototyping processes. The objective is to take into consideration the complete life-cycle of a rapid prototyped part: manufacturing of raw material as far as reprocessing of waste. Practical implications \textendash{} Reduction of electrical energy consumption to complete a job. Originality/value \textendash{} Currently, environmental aspects are not well studied in rapid prototyping.}, - isbn = {3325406106}, - keywords = {electric power generation,energy,environmental management,paper type research paper,rapid prototypes}, - file = {/Users/fabio/Zotero/storage/Q5HI95TP/Mognol, Lepicart, Perry - 2006 - Rapid prototyping energy and environment in the spotlight.pdf} -} - -@article{Mohamed2015, - title = {Optimization of Fused Deposition Modeling Process Parameters: A Review of Current Research and Future Prospects}, - author = {a. Mohamed, Omar and Masood, Syed H. and Bhowmik, Jahar L.}, - year = {2015}, - journal = {Advances in Manufacturing}, - pages = {42--53}, - issn = {2095-3127}, - doi = {10.1007/s40436-014-0097-7}, - abstract = {Fused deposition modeling (FDM) is one of the most popular additive manufacturing technologies for various engineering applications. FDM process has been introduced commercially in early 1990s by Stratasys Inc., USA. The quality of FDM processed parts mainly depends on careful selection of process variables. Thus, identification of the FDM process parameters that significantly affect the quality of FDM processed parts is important. In recent years, researchers have explored a number of ways to improve the mechanical properties and part quality using various experimental design techniques and concepts. This article aims to review the research carried out so far in determining and optimizing the process parameters of the FDM process. Several statistical designs of experiments and optimization techniques used for the determination of optimum process parameters have been examined. The trends for future FDM research in this area are described.}, - isbn = {2095-3127}, - keywords = {Additive manufacturing,Experimental design,Fused deposition modeling (FDM),Mechanical properties,parameters,Part quality,Process}, - file = {/Users/fabio/Zotero/storage/9A7W3QC2/Optimization of fused deposition modeling process parameters a review of current research and future prospects.pdf} -} - -@article{mohammadebrahimiManufacturingSustainabilityInstitutional2021, - title = {Manufacturing Sustainability: {{Institutional}} Theory and Life Cycle Thinking}, - author = {Mohammad Ebrahimi, Seyed and Koh, Lenny}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {298}, - pages = {126787}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126787}, - urldate = {2021-04-29}, - abstract = {This study sets out to bridge resource perspective on material selection with stakeholder and institutional theory considerations to provide a more comprehensive understanding of life-cycle thinking on material selection decisions in the automotive industry. The objective is to shed light on how regulatory, normative and mimetic institutional pressures, affect sustainability decisions when switching or substituting materials or manufacturing processes in the automotive industry. Within a hybrid life cycle analysis framework, the environmental hotspots across the supply chains of two empirical management examples of Aluminium and CFRP LCA models are presented, quantified and ranked. Further justifications are provided on why and how regulatory, normative-peer and peer-normative pressures affect life cycle decisions. Findings reveal early, mid-process and late-stage life cycle hotspots, both in the material selection and the manufacturing process for both components. This decision support framework can be used to diverge from high energy-intensive manufacturing process and conventional raw materials, and provide forward-looking automotive manufacturers with opportunity to make asset-specific investments in lightweight, fuel-efficient vehicles, and sustainable manufacturing operations. This study presents a new framework that hybridises institutional theory and life cycle thinking to enable a standard routine and decision assessment of sustainability. This study provides a novel theoretical perspective on life cycle assessment by highlighting how the framing rules in a given institution mirror the trajectory of institutional pressures from regulatory (organised laws) through normative (organised behaviour) to mimetic (copied behaviour).}, - keywords = {Institutional theory,Life cycle assessment,Sustainability} -} - -@article{Mohammadhosseini2014, - title = {A {{Study}} of {{Morphology}} of {{Titanium Powder Used}} in {{Electron Beam Melting}}}, - author = {Mohammadhosseini, Afshin and Fraser, Darren and Masood, S.H. and Jahedi, Mahnaz}, - year = {2014}, - month = mar, - journal = {Applied Mechanics and Materials}, - volume = {541--542}, - pages = {160--163}, - issn = {1662-7482}, - doi = {10.4028/www.scientific.net/AMM.541-542.160}, - keywords = {a revolutionary manufacturing,abstract,additive manufacturing,chemical properties,ebm,electron beam melting,has been recognized as,powder morphology,process,process has shown great,promise for fabrication,recycling,this layer-by-layer additive manufacturing,ti6al4v}, - file = {/Users/fabio/Zotero/storage/H5DN338A/A Study of Morphology of Titanium Powder Used in Electron Beam Melting.pdf} -} - -@article{Mohammadizadeh2019, - title = {{{3D}} Printed Fiber Reinforced Polymer Composites - {{Structural}} Analysis}, - author = {Mohammadizadeh, M. and Imeri, A. and Fidan, I. and Elkelany, M.}, - year = {2019}, - journal = {Composites Part B: Engineering}, - volume = {175}, - number = {April}, - pages = {107112}, - publisher = {{Elsevier Ltd}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2019.107112}, - abstract = {In this research, mechanical and structural properties of Continuous Fiber Reinforced Additively Manufactured (CFRAM) components are studied. Structural analysis is performed to understand the failure behavior of CFRAM components. Based on the SEM analysis of the tested parts, correlations between results of the mechanical test and microstructure of the parts have been investigated. CFRAM components are lightweight yet strong materials with a wide range of potential applications in auto industry, aerospace, sport goods, and medical tools. CFRAM components benefit from both cutting-edge 3D printing technology and fiber reinforcement to improve mechanical properties. Produced parts have lightweight compared with metals, strong mechanical properties, and short manufacturing time. In addition, thermoplastic polymer used for CFRAM components makes product recyclable. In this study, samples were printed using Markforged Mark Two printer and the effect of the fiber type, fiber orientations, infill density, and temperatures on tensile, fatigue, and creep properties were investigated. Carbon fiber (CF), fiberglass (FG), and Kevlar were used as reinforcing agents, and nylon as the base material. Microstructural analysis was conducted to investigate the fracture mechanism, morphology, and printing quality of the specimens. It was observed that the main failing mechanisms for CFRAM components are fiber pull-out, fiber breakage, and delamination. Further, it was understood that there is a correlation between the fiber stacking density and mechanical properties. Overall, the information provided in this study reports a unique knowledge base about the mechanical and structural behaviours of the components built with the CFRAM technology.}, - keywords = {Additive manufacturing,Fiber reinforcement,Polymer composites,Structural analysis}, - file = {/Users/fabio/Zotero/storage/LW9YZW3F/3D printed fiber reinforced polymer composites - Structural analysis.pdf} -} - -@article{Mohammed2017, - title = {{{EcoPrinting}} : {{Investigating}} the Use of 100 \% Recycled {{Acrylonitrile Butadiene Styrene}} ( {{ABS}} ) for {{Additive Manufacturing}}}, - author = {Mohammed, Mazher Iqbal and Das, Anirudra and {Gomez-kervin}, Eli and Wilson, Daniel and Gibson, Ian}, - year = {2017}, - journal = {Solid Freeform Fabrication Symposium}, - pages = {532--542}, - keywords = {3d printing,{3D Printing, Recycling, FDM, EcoPrinting, ABS},abs,au,corresponding author,deakin,ecoprinting,edu,fdm,mazher,mohammed,recycling}, - file = {/Users/fabio/Zotero/storage/R44V4P45/EcoPrinting- Investigating the use of 100% recycled Acrylonitrile Butadiene Styrene (ABS) for Additive Manufacturing.pdf} -} - -@inproceedings{Mohammed2018, - title = {{{EcoPrinting}}: {{Investigation}} of {{Solar Powered Plastic Recycling}} and {{Additive Manufacturing}} for {{Enhanced Waste Management}} and {{Sustainable Manufacturing}}}, - booktitle = {2018 {{IEEE Conference}} on {{Technologies}} for {{Sustainability}} ({{SusTech}})}, - author = {Mohammed, Mazher Iqbal and Wilson, Daniel and {Gomez-Kervin}, Eli and Rosson, Lucas and Long, Johannes}, - year = {2018}, - month = nov, - pages = {1--6}, - publisher = {{IEEE}}, - doi = {10.1109/SusTech.2018.8671370}, - abstract = {In this article we propose the EcoPrinting technology, which aims at a near zero carbon foot print means of recycling waste polymers into functional, working products. To achieve this goal, we demonstrate a nanogrid device by which solar energy can be stored in a modest sized battery system and use this to power instrumentation for melt extrusion of waste polymers into 3D printer filaments. We then use this filament in a modified 3D printer system to manufacture functional humanitarian aid components such as water seals and pipe connectors. We investigate the feasibility of the EcoPrinting principal using ABS and HDPE plastics, while evaluating and optimizing enabling device energy consumption and manufacturing performance. We conclude that the EcoPrinting principal is possible and functional devices can be manufactured with mechanical integrity equivalent to commercially available components. We finally demonstrate that EcoPrinting can be used as a tool for humanitarian use, realizing a manufacturing paradigm that is self-sufficient and potentially capable of addressing challenges of plastic proliferation in developing nations. \textcopyright{} 2018 IEEE.}, - isbn = {978-1-5386-7791-9}, - keywords = {3D printing,Ecoprinting,Extrusion,Humanitarian Aid,Plastic,Recycle,Solar}, - file = {/Users/fabio/Zotero/storage/M72UKSET/EcoPrinting- Investigation of Solar Powered Plastic Recycling and Additive Manufacturing for Enhanced Waste Management and Sustainable Manufacturing.pdf} -} - -@inproceedings{Mohammed2018a, - title = {The Recycling of {{E-Waste ABS}} Plastics by Melt Extrusion and {{3D}} Printing Using Solar Powered Devices as a Transformative Tool for Humanitarian Aid}, - booktitle = {Solid {{Freeform Fabrication Proceedings}}}, - author = {Mohammed, Mazher Iqbal and Wilson, Daniel and {Gomez-kervin}, Eli and Vidler, Callum and Rosson, Lucas and Long, Johannes}, - year = {2018}, - number = {29}, - pages = {80--92}, - file = {/Users/fabio/Zotero/storage/EQCCQUXY/The recycling of E-Waste ABS plastics by melt extrusion and 3D printing using solar powered devices as a transformative tool for humanitarian aid.pdf} -} - -@article{Mohammed2019, - title = {Investigation of {{Closed-Loop Manufacturing}} with {{Acrylonitrile Butadiene Styrene}} over {{Multiple Generations Using Additive Manufacturing}}}, - author = {Mohammed, Mazher Iqbal and Wilson, Daniel and {Gomez-Kervin}, Eli and Tang, Bin and Wang, Jinfeng}, - year = {2019}, - month = aug, - journal = {ACS Sustainable Chemistry \& Engineering}, - volume = {7}, - number = {16}, - pages = {13955--13969}, - issn = {2168-0485}, - doi = {10.1021/acssuschemeng.9b02368}, - keywords = {3d printing,abs,fff,mechanical,polymer,recycled}, - file = {/Users/fabio/Zotero/storage/WKRRDEDJ/Investigation of closed loop manufacturing with Acrylonitrile Butadiene Styrene (ABS) over multiple generations using .pdf} -} - -@article{Mohammed2022, - title = {Sustainability and Feasibility Assessment of Distributed {{E-waste}} Recycling Using Additive Manufacturing in a {{Bi-continental}} Context}, - author = {Mohammed, Mazher and Wilson, Daniel and {Gomez-Kervin}, Eli and Petsiuk, Aliaksei and Dick, Rachel and Pearce, Joshua M.}, - year = {2022}, - month = dec, - journal = {Additive Manufacturing}, - volume = {50}, - pages = {102548}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102548}, - urldate = {2021-12-10}, - abstract = {The most abundant e-waste plastic is acrylonitrile butadiene styrene (ABS), which is not typically processed by municipal programs and is equally one of the most popular 3-D printing filaments. This makes ABS a prime candidate for the distributed recycling for additive manufacturing (DRAM) approach, which has the potential to increase recycling rates by providing economic incentive for consumers to recycle. For DRAM to be globally applicable, this study investigates the role of the ABS e-waste source and processes to fabricate 3-D printing filament and printed components in both Australia and North America. The study used two different open source extruder systems to convert e-waste into 3D printer filament and for material quality to be assessed through standardized tensile and compression testing. Results revealed a modest reduction in mechanical properties compared to virgin ABS, highlighting the potential for recycled e-waste ABS for consumer and industrial uses. We also show DRAM can significantly reduce 3-D printer filament cost, however, carbon emissions from conversion underscored the need for technical efficiency improvements in electricity generating between countries. Finally, the variations in the properties of the ABS e-waste indicates the need for appropriate labeling of materials in order to advance recycling.}, - isbn = {2021.102548}, - keywords = {Additive manufacturing,Distributed manufacturing,E-waste,Open source,Plastic,Recycling}, - file = {/Users/fabio/Zotero/storage/2SRWX4YY/Mohammed et al. - 2022 - Sustainability and feasibility assessment of distributed E-waste recycling using additive manufacturing in a Bi.pdf} -} - -@article{Mohan2017, - title = {A Review on Composite Materials and Process Parameters Optimisation for the Fused Deposition Modelling Process}, - author = {Mohan, N. and Senthil, P. and Vinodh, S. and Jayanth, N.}, - year = {2017}, - month = jan, - journal = {Virtual and Physical Prototyping}, - volume = {12}, - number = {1}, - pages = {47--59}, - publisher = {{Taylor \& Francis}}, - issn = {1745-2759}, - doi = {10.1080/17452759.2016.1274490}, - abstract = {ABSTRACTFused deposition modelling is the most significant technique in additive manufacturing (AM) that refers to the process where successive layers of material are deposited in a computer-controlled environment to create a three-dimensional object. The main limitations of using fused deposition modelling (FDM) process in the industrial applications are the narrow range of available materials and parts fabricated by FDM are used only as demonstration or conceptual parts rather than as functional parts. Recently, researchers have studied many ways in order to increase the range of materials available for the FDM process which resulted in the increase in the scope of FDM in various manufacturing sectors. Most of the research are focussed on the composite materials such as metal matrix composites, ceramic composites, natural fibre-reinforced composites and polymer matrix composites. This article intends to review the research carried out so far in developing samples using different composite materials and ...}, - keywords = {Additive manufacturing,composite materials,fused deposition modelling,mechanical properties,optimisation}, - file = {/Users/fabio/Zotero/storage/FK69JJ8M/A review on composite materials and process parameters optimisation for the fused deposition modelling process.pdf} -} - -@article{Mohan2020, - title = {Dismantlers' Dilemma in End-of-Life Vehicle Recycling Markets: A System Dynamics Model}, - author = {Mohan, T. V. Krishna and Amit, R. K.}, - year = {2020}, - month = jul, - journal = {Annals of Operations Research}, - volume = {290}, - number = {1-2}, - pages = {591--619}, - issn = {0254-5330}, - doi = {10.1007/s10479-018-2930-z} -} - -@article{Mohanty2000, - title = {Biofibres, Biodegradable Polymers and Biocomposites: {{An}} Overview}, - author = {Mohanty, a. K. and Misra, M. and Hinrichsen, G.}, - year = {2000}, - journal = {Macromolecular Materials and Engineering}, - volume = {276--277}, - pages = {1--24}, - issn = {14387492}, - doi = {10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W}, - abstract = {Review: Recently the critical discussion about the preservation of natural resources and recycling has led to the renewed interest concerning biomaterials with the focus on renewable raw materials. Because of increasing environmental consciousness and demands of legislative authorities, use and removal of traditional composite structures, usually made of glass, carbon or aramid fibers being reinforced with epoxy, unsaturated polyester, or phenolics, are considered critically. Recent advances in natural fiber development, genetic engineering and composite science offer significant opportunities for improved materials from renewable resources with enhanced support for global sustainability. The important feature of composite materials is that they can be designed and tailored to meet different requirements. Since natural fibers are cheap and biodegradable, the biodegradable composites from biofibers and biodegradable polymers will render a contribution in the 21st century due to serious environmental problem. Biodegradable polymers have offered scientists a possible solution to waste-disposal problems associated with traditional petroleum-derived plastics. For scientists the real challenge lies in finding applications which would consume sufficiently large quantities of these materials to lead price reduction, allowing biodegradable polymers to compete economically in the market. Today's much better performance of traditional plastics are the outcome of continued R\&D efforts of last several years; however the existing biodegradable polymers came to public only few years back. Prices of biodegradable polymers can be reduced on mass scale production; and such mass scale production will be feasible through constant R\&D efforts of scientists to improve the performance of biodegradable plastics. Manufacture of biodegradable composites from such biodegradable plastics will enhance the demand of such materials. The structural aspects and properties of several biofibers and biodegradable polymers, recent developments of different biodegradable polymers and biocomposites are discussed in this review article. Collaborative R\&D efforts among material scientists and engineers as well as intensive co-operation and co-ordination among industries, research institutions and government are essential to find various commercial applications of biocomposites even beyond to our imagination.}, - isbn = {1439-2054}, - pmid = {9}, - file = {/Users/fabio/Zotero/storage/VQSEYHJU/Biofibres, biodegradable polymers and biocomposites An overview.pdf} -} - -@article{Moher2009, - title = {Preferred {{Reporting Items}} for {{Systematic Reviews}} and {{Meta-Analyses}}: {{The PRISMA Statement}}}, - author = {Moher, David and Liberati, Alessandro and Tetzlaff, Jennifer and Altman, Douglas G.}, - year = {2009}, - month = jul, - journal = {PLoS Medicine}, - volume = {6}, - number = {7}, - pages = {e1000097}, - issn = {1549-1676}, - doi = {10.1371/journal.pmed.1000097} -} - -@article{moholFunctionalApplications4D2021, - title = {Functional Applications of {{4D}} Printing: {{A}} Review}, - author = {Mohol, Shubham Shankar and Sharma, Varun}, - year = {2021}, - month = aug, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-10-2020-0240}, - urldate = {2021-08-24}, - keywords = {3d printing,4D printing,Functional applications,Smart materials,Stimulus} -} - -@article{Moilanen2012, - title = {Emerging Hackerspaces\textendash{{Peer-production}} Generation}, - author = {Moilanen, Jarkko}, - year = {2012}, - journal = {Open Source Systems: Long-Term Sustainability}, - pages = {94--111}, - isbn = {3642334415}, - keywords = {1 introduction and motivation,community,fabbing,fablab,hackers form a global,hackerspace,makerspace,micro-communities,motivation,movement,open source,peer-production,survey,sustainability,which consists of multiple} -} - -@inproceedings{Mok2017, - title = {Critiquing Physical Prototypes for a Remote Audience}, - booktitle = {Proc. 2017 Conf. {{Des}}. {{Interact}}. {{Syst}}.}, - author = {Mok, Terrance and Oehlberg, Lora}, - year = {2017}, - month = jun, - pages = {1295--1307}, - publisher = {{ACM}}, - address = {{New York, NY, USA}}, - doi = {10.1145/3064663.3064722}, - isbn = {978-1-4503-4922-2} -} - -@article{molesHardWorkReparative2023, - title = {The Hard Work of Reparative Futures: {{Exploring}} the Potential of Creative and Convivial Practices in Post-Conflict {{Uganda}}}, - shorttitle = {The Hard Work of Reparative Futures}, - author = {Moles, Kate and Anek, Florence and Baker, Will and Komakech, Daniel and Owor, Arthur and Pennell, Catriona and Rowsell, Jennifer}, - year = {2023}, - month = oct, - journal = {Futures}, - volume = {153}, - pages = {103224}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2023.103224}, - urldate = {2023-08-31}, - abstract = {In this paper we empirically explore the ways in which young people were enroled in a multimodal exhibition to creatively produce narratives of their past, presents and futures. We look at the different ways this work was framed, and how all memory work and, we argue, future work is relational, interactionally produced and situated in dynamic and unfolding social and political frameworks. We look at the ways young people described the work of producing accounts of their futures within that setting, and the different forms of labour involved in that process. We explore the encounters that fostered local, more humble, acts of care and repair, and how those everyday practices might help build towards reparative futures.}, - keywords = {Conflict,Conviviality,Creativity,Reparative futures,Young people}, - file = {/Users/fabio/Zotero/storage/KQJKWEPQ/Moles et al_2023_The hard work of reparative futures.pdf;/Users/fabio/Zotero/storage/N2ZBCMDM/S0016328723001283.html} -} - -@article{Molina2019, - title = {Machine {{Learning}} for {{Sociology}}}, - author = {Molina, Mario and Garip, Filiz}, - year = {2019}, - month = jul, - journal = {Annual Review of Sociology}, - volume = {45}, - number = {1}, - pages = {27--45}, - issn = {0360-0572}, - doi = {10.1146/annurev-soc-073117-041106}, - abstract = {Machine learning is a field at the intersection of statistics and computer science that uses algorithms to extract information and knowledge from data. Its applications increasingly find their way into economics, political science, and sociology. We offer a brief introduction to this vast toolbox and illustrate its current uses in the social sciences, including distilling measures from new data sources, such as text and images; characterizing population heterogeneity; improving causal inference; and offering predictions to aid policy decisions and theory development. We argue that, in addition to serving similar purposes in sociology, machine learning tools can speak to long-standing questions on the limitations of the linear modeling framework, the criteria for evaluating empirical findings, transparency around the context of discovery, and the epistemological core of the discipline.} -} - -@article{molloyOpportunitiesSingleusePlastic2022, - title = {Opportunities for Single-Use Plastic Reduction in the Food Service Sector during {{COVID-19}}}, - author = {Molloy, Shen and Varkey, Priyanka and Walker, Tony R.}, - year = {2022}, - month = mar, - journal = {Sustainable Production and Consumption}, - volume = {30}, - pages = {1082--1094}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.01.023}, - urldate = {2022-02-09} -} - -@article{Molthan-Hill2019, - title = {Climate Change Education for Universities: {{A}} Conceptual Framework from an International Study}, - author = {{Molthan-Hill}, Petra and Worsfold, Nicholas and Nagy, Gustavo J. and Leal Filho, Walter and Mifsud, Mark}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {226}, - pages = {1092--1101}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.053}, - urldate = {2020-05-21}, - abstract = {The role of universities in climate change education (CCE) is of great importance if the scientific, social, environmental and political challenges the world faces are to be met. Future leaders must make decisions from an informed position and the public will need to embed climate change mitigation tools into their work and private life. It is therefore essential to understand the range of CCE strategies being taken globally by Higher Education Institutions (HEIs) and to explore and analyse the ways that HEIs could better address this challenge. Consistent with this research need, this paper offers an analysis of the extent to which HEIs in 45 countries approach CCE and provides a conceptual framework for exploring how HEIs are embedding CCE into their curricula. In addition to the specialist approach (where students choose to study a degree to become experts in climate change adaptation and mitigation tools), the CCE framework developed identifies and highlights three other approaches HEIs can deploy to embed CCE: Piggybacking, mainstreaming and connecting (transdisciplinary). Using data gathered in an explorative international survey involving participants working across academic and senior management, this paper illustrates the different approaches taken and analyses practical examples of current CCE practice from across the world. Responses from 212 university staff from 45 countries indicated that CCE was highly variable \textendash{} no clear pattern was identified at the country level, with CCE approaches varying significantly, even within individual HEIs. This plurality highlights the wide range of ideas and examples being shared and used by institutions in very different countries and contexts, and underlines the importance of the independence and autonomy of HEIs so that they can choose the right CCE approaches for them. To highlight the breadth and variety of approaches that were uncovered by our survey, the paper offers a range of examples illustrating how climate change education may be embedded in a higher education context, some of which could be replicated in HEIs across the world. The conceptualisation of CCE and the examples given in this paper are valuable for anyone who is thinking about strategies for embedding more climate education in the higher education curriculum.}, - keywords = {Carbon literacy,Climate change education,Conceptual framework,HEI,Mitigation} -} - -@article{Momeni2017, - title = {A Review of {{4D}} Printing}, - author = {Momeni, Farhang and N, Seyed M Mehdi Hassani and Liu, Xun and Ni, Jun}, - year = {2017}, - journal = {Materials \& Design}, - volume = {122}, - pages = {42--79}, - publisher = {{Elsevier Ltd}}, - issn = {0264-1275}, - doi = {10.1016/j.matdes.2017.02.068}, - keywords = {4D printing,Digital materials,Inverse and forward problems,Multi-material structures,Shape-shifting mechanisms,Voxel}, - file = {/Users/fabio/Zotero/storage/L65CI5SI/A review of 4D printing.pdf} -} - -@article{Monavvarifard2019, - title = {Increasing the Sustainability Level in Agriculture and {{Natural Resources Universities}} of {{Iran}} through Students' Engagement in the Value {{Co-creation}} Process}, - author = {Monavvarifard, Feyzallah and Baradaran, Masoud and Khosravipour, Bahman}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {234}, - pages = {353--365}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.175}, - urldate = {2020-05-21}, - abstract = {The scholars of sustainable development and education mostly believe that universities have an underlying role in explaining the movement of human societies towards sustainable development; but universities can play such a role, only if they themselves are sustainable as well. However, the subjects on sustainable development in Iran's higher education are still in their early stages and face many challenges. Some of these challenges are associated with the lack of engagement of university operators, especially students, in sustainability activities. Value Co-creation process in academic environments might be very effective in overcoming these challenges. Moreover, few studies have been conducted yet on what the relationship between Value Co-creation and sustainability level is and revealing the effective key factors in academic environments. In addition, the causal relationships between the factors influencing Value Co-creation in academic environments have not been taken into consideration by researchers. The overall aim of this study is to explore the effective factors in the engagement of universities and students in Value Co-creation process and to introduce a model for improving the level of Value Co-creation in academic environments. For this purpose, Mixed Method within a sequential-explanatory design was used. The results obtained from the content analysis showed that a total of eight factors affect the students' engagement in Value Co-creation process. The factors were classified into two general categories: (1) university-related factors (including university management support for sustainability-oriented activities, sustainability-oriented education, ICT infrastructures, and teaching quality of instructors); and (2) students-related factors (including Sustainability-oriented values, social capital, perceived self-efficacy, and trust in faculty members). The Structural Equation Model (SEM) of the study indicated that sustainability-oriented values, university management support for sustainability-oriented activities, trust in faculty members, social capital, and perceived self-efficacy have a direct and significant impact on the Value Co-creation process in the studied universities. There was also a positive and significant relationship between the engagement of students in Value Co-creation process and university sustainability.}, - keywords = {Citizenship behavior,Sustainability-oriented values,Sustainable development,Value Co-Creation} -} - -@article{Monsigny2018a, - title = {Depolymerization of {{Waste Plastics}} to {{Monomers}} and {{Chemicals Using}} a {{Hydrosilylation Strategy Facilitated}} by {{Brookhart}}'s {{Iridium}}({{III}}) {{Catalyst}}}, - author = {Monsigny, Louis and Berthet, Jean-Claude and Cantat, Thibault}, - year = {2018}, - month = aug, - journal = {ACS Sustainable Chemistry \& Engineering}, - volume = {6}, - number = {8}, - pages = {10481--10488}, - issn = {2168-0485}, - doi = {10.1021/acssuschemeng.8b01842} -} - -@article{montagnesFindingYourScientific2022, - title = {Finding Your Scientific Story by Writing Backwards}, - author = {Montagnes, David J. S. and Montagnes, E. Ian and Yang, Zhou}, - year = {2022}, - month = feb, - journal = {Marine Life Science \& Technology}, - volume = {4}, - number = {1}, - pages = {1--9}, - issn = {2662-1746}, - doi = {10.1007/s42995-021-00120-z}, - urldate = {2023-01-14}, - abstract = {To succeed, a scientist must write well. Substantial guidance exists on writing papers that follow the classic Introduction, Methods, Results, and Discussion (IMRaD) structure. Here, we fill a critical gap in this pedagogical canon. We offer guidance on developing a good scientific story. This valuable\textemdash yet often poorly achieved\textemdash skill can increase the impact of a study and its likelihood of acceptance. A scientific story goes beyond presenting information. It is a cohesive narrative that engages the reader by presenting and solving a problem, with a beginning, middle, and end. To create this narrative structure, we urge writers to consider starting at the end of their study, starting with writing their main conclusions, which provide the basis of the Discussion, and then work backwards: Results \textrightarrow{} Methods \textrightarrow{} refine the Discussion \textrightarrow{} Introduction \textrightarrow{} Abstract \textrightarrow{} Title. In this brief and informal editorial, we offer guidance to a wide audience, ranging from upper-level undergraduates (who have just conducted their first research project) to senior scientists (who may benefit from re-thinking their approach to writing). To do so, we provide specific instruction, examples, and a guide to the literature on how to ``write backwards'', linking scientific storytelling to the IMRaD structure.}, - langid = {english}, - keywords = {Scientific narrative,Scientific pedagogy,Scientific writing,Story-telling,Writing structure}, - file = {/Users/fabio/Zotero/storage/T3XXQPK2/Montagnes et al_2022_Finding your scientific story by writing backwards.pdf} -} - -@inproceedings{Montero2001, - title = {Material {{Characterization}} of {{Fused Deposition Modeling}} ( {{FDM}} ) {{ABS}} by {{Designed Experiments}}}, - booktitle = {Proceedings of {{Rapid Prototyping}} and {{Manufacturing Conference}} , {{SME}}}, - author = {Montero, Michael and Roundy, Shad and Odell, Dan and Ahn, Sung-hoon and Wright, Paul K}, - year = {2001}, - pages = {1--21}, - file = {/Users/fabio/Zotero/storage/HI8VUHYK/Montero et al. - 2001 - Material Characterization of Fused Deposition Modeling ( FDM ) ABS by Designed Experiments.pdf} -} - -@book{Montgomery2001, - title = {Design and {{Analysis}} of {{Experiments}}}, - author = {Montgomery, Douglas C}, - year = {2001}, - publisher = {{John Wiley and Sons Inc}}, - urldate = {2021-01-15} -} - -@article{Monzon2014, - title = {Standardization in Additive Manufacturing: Activities Carried out by International Organizations and Projects}, - author = {Monz{\'o}n, M. D. and Ortega, Z. and Mart{\'i}nez, A. and Ortega, F.}, - year = {2014}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {76}, - number = {5-8}, - pages = {1111--1121}, - issn = {14333015}, - doi = {10.1007/s00170-014-6334-1}, - abstract = {Standards have to satisfy the needs of the different groups represented, such as industrial, trade, and consumer groups of all of the countries involved. Most experts agree that the lack of additive manufacturing (AM) standards is a key point to take into account in the barriers to broad adoption of AM. Although over the past two decades several entities and groups of experts have demanded the development of specific standards for additive manufacturing, the most important steps forward have been taken in the last few years, mainly through the actions of international organizations such as International Organization for Standardization (ISO) and American Society for Testing and Materials (ASTM), with the support of technical groups and projects focused on the standardization of AM. This work, which is successfully providing new standards for AM, is expected to be reinforced by a global agreement between ASTM and ISO with the aim of collaboration on common AM standards. This paper presents a summary and review of actions carried out so far by different organizations and projects, based on the work of several road maps and workshops, with the aim of developing new standards in this particular field.}, - isbn = {0017001463}, - keywords = {Additive manufacturing,ASTM,ISO,Standardization}, - file = {/Users/fabio/Zotero/storage/LFF7VTBS/Standardization in additive manufacturing- activities carried out by international organizations and projects.pdf} -} - -@article{moomenInadequateAdaptationGeospatial2019, - title = {Inadequate Adaptation of Geospatial Information for Sustainable Mining towards Agenda 2030 Sustainable Development Goals}, - author = {Moomen, Abdul Wadood and Bertolotto, Michela and Lacroix, Pierre and Jensen, David}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117954}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117954}, - urldate = {2020-06-18}, - abstract = {For all the evolutionary ages of mineral resource development, there have not been concerns about sustainable mining until the 21st century. Thus, this paper explores the extent to which emerging geospatial technologies have been deliberately used in the mining industry activities to achieve the United Nations Agenda 2030 Sustainable Development Goals. Governments, the mining industry, Non-Governmental and International Organisations have various investments in geospatial programmes and technologies for Environmental and Social Impact Assessments and baseline studies to enhance the achievement of these goals. However, these efforts prove inadequate to link the social, environmental and economic baseline analysis of sustainable development goals. The observations in this paper, therefore, have been obtained largely from extensive literature review to gain a broad understanding of previous and current applications of emerging technologies in the field. The literature has been explored in two successive steps. First, the literature was broadly queried to find the most current works on sustainable mining for three decades (i.e. 1990 to 2019). Second, out of over 100 papers, reports, and books retrieved in the first step, a more specific search and analysis of existing academic and industry literature on the explicit applications of emerging geospatial technology for enhancing sustainable development in the mining sector was conducted. In spite of its ensemble of capabilities for multivariate analysis, analysis of the literature reveals that there is inadequate adaptation of emerging geospatial technologies, which can simultaneously measure and link generally acceptable social, economic and environmental costs and benefits of mining for sustainability considerations in a local setting. There is a dearth of literature that discuss this new approach in addressing sustainable mining. Findings of this paper shall, therefore, inform the scientific community, industry, Non-Governmental Organisations and consultants on emerging approaches to address salient issues of sustainable mining towards meeting the agenda 2030 SDGs.}, - keywords = {Agenda 2030,Geospatial information,Mining,Remote sensing,Sustainable development} -} - -@article{Moon2001, - title = {Fabrication of Functionally Graded Reaction Infiltrated {{SiC}}\textendash{{Si}} Composite by Three-Dimensional Printing ({{3DP}}\texttrademark ) Process}, - author = {Moon, Jooho and Caballero, Amador C. and Hozer, Leszek and Chiang, Yet-Ming and Cima, Michael J.}, - year = {2001}, - journal = {Materials Science and Engineering: A}, - volume = {298}, - number = {1-2}, - pages = {110--119}, - issn = {09215093}, - doi = {10.1016/S0921-5093(00)01282-X}, - abstract = {Carbon performs have been fabricated using the three-dimensional printing (3DP) process for reaction-infiltrated SiC-Si composites. Starting with glassy carbon powders of 45-105 {$\mu$}m sizes, the preform was produced by printing acetone-based furfuryl resin binder. The bulk d. and open porosity of the resulting preform was 0.6 g cm-3 and 48\%, resp. The binder printing conditions during preform fabrication mostly detd. the preform microstructure. Pressureless reactive infiltration of such preforms at 1450\textdegree C in nitrogen atm. formed a SiC-Si composite with a coarse-SiC grain structure. Some residual carbon remained inside the SiC grains in this reaction bonded SiC-C due to sluggish reactivity of the larger carbon powder particles. Relatively complex-shaped carbon preforms with overhang, undercut, and inner channel structures were produced, demonstrating the capability of the 3DP process. A functionally graded SiC-Si composite was also fabricated, by varying carbon-yielding binder dosage during the preform fabrication, in order to control the spatial SiC concn. within the SiC-Si composite. [on SciFinder(R)]}, - isbn = {0921-5093}, - keywords = {fgm,reaction-infiltrated composite,solid freeform fabrication}, - file = {/Users/fabio/Zotero/storage/TX3DG3HA/Moon et al. - 2001 - Fabrication of functionally graded reaction infiltrated SiC–Si composite by three-dimensional printing (3DP™) p.pdf} -} - -@article{Moraczewski2014, - title = {Characterization of Multi-Injected Poly({$\epsilon$}-Caprolactone)}, - author = {Moraczewski, Krzysztof}, - year = {2014}, - journal = {Polymer Testing}, - volume = {33}, - pages = {116--120}, - publisher = {{Elsevier Ltd}}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2013.11.010}, - abstract = {The effect of multiple (up to 10 times) injection molding of poly({$\epsilon$}-caprolactone) on its mechanical properties, Charpy impact strength, melt flow rate, phase transition temperature and degradation temperature is presented. It was found that the tensile strength at break, impact strength and degradation temperature slightly decreased, while the melt flow rate steadily increased with raising of the number of the injection molding cycles. Variation of the number of these cycles mostly influenced the crystallization temperature. The melting point, enthalpy of crystallization, enthalpy of melting and crystallinity did not vary with the number of injection moldings. The presented results indicate that poly({$\epsilon$}-caprolactone) technological waste is suitable to be reused as an additive to a neat polymer. \textcopyright{} 2013 Elsevier Ltd. All rights reserved.}, - isbn = {4852341931}, - keywords = {Injection molding,Poly({$\epsilon$}-caprolactone),Recycling}, - file = {/Users/fabio/Zotero/storage/CI9SM5IW/Moraczewski - 2014 - Characterization of multi-injected poly(ε-caprolactone).pdf} -} - -@article{Moraga2019, - title = {Circular Economy Indicators: {{What}} Do They Measure?}, - author = {Moraga, Gustavo and Huysveld, Sophie and Mathieux, Fabrice and Blengini, Gian Andrea and Alaerts, Luc and Van Acker, Karel and {de Meester}, Steven and Dewulf, Jo}, - year = {2019}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {146}, - pages = {452--461}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2019.03.045}, - urldate = {2020-10-01}, - abstract = {Circular Economy (CE) is a growing topic, especially in the European Union, that promotes the responsible and cyclical use of resources possibly contributing to sustainable development. CE is an umbrella concept incorporating different meanings. Despite the unclear concept, CE is turned into defined action plans supported by specific indicators. To understand what indicators used in CE measure specifically, we propose a classification framework to categorise indicators according to reasoning on what (CE strategies) and how (measurement scope). Despite different types, CE strategies can be grouped according to their attempt to preserve functions, products, components, materials, or embodied energy; additionally, indicators can measure the linear economy as a reference scenario. The measurement scope shows how indicators account for technological cycles with or without a Life Cycle Thinking (LCT) approach; or their effects on environmental, social, or economic dimensions. To illustrate the classification framework, we selected quantitative micro scale indicators from literature and macro scale indicators from the European Union `CE monitoring framework'. The framework illustration shows that most of the indicators focus on the preservation of materials, with strategies such as recycling. However, micro scale indicators can also focus on other CE strategies considering LCT approach, while the European indicators mostly account for materials often without taking LCT into account. Furthermore, none of the available indicators can assess the preservation of functions instead of products, with strategies such as sharing platforms, schemes for product redundancy, or multifunctionality. Finally, the framework illustration suggests that a set of indicators should be used to assess CE instead of a single indicator.}, - keywords = {Circular economy,Indicators,Life cycle thinking,Sustainability}, - file = {/Users/fabio/Zotero/storage/G3NQ4DS5/full-text.pdf} -} - -@book{Morel2016, - title = {Fab {{Labs}}}, - author = {Morel, Laure and Le Roux, Serge}, - year = {2016}, - month = jun, - journal = {Fab Labs}, - publisher = {{John Wiley \& Sons, Inc.}}, - address = {{Hoboken, NJ, USA}}, - doi = {10.1002/9781119318392}, - isbn = {978-1-119-31839-2} -} - -@article{Morel2018, - title = {Innovation {{Spaces}}: {{New Places}} for {{Collective Intelligence}}?}, - author = {Uzunidis, Dimitri and Morel, Laure and Dupont, Laurent and Boudarel, Marie-Reine}, - year = {2018}, - journal = {Collective Innovation Processes}, - pages = {87--107}, - doi = {10.1002/9781119557883.ch5}, - abstract = {Morel, L., Dupont, L., \& Boudarel, M. R. (2018). Innovation Spaces: New Places for Collective Intelligence?. Collective Innovation Processes: Principles and Practices, 4, pp. 87-107.}, - file = {/Users/fabio/Zotero/storage/BSMMUP2B/Innovation Spaces- New Places for Collective Intelligence.pdf} -} - -@article{Moreno-Camacho2019, - title = {Sustainability Metrics for Real Case Applications of the Supply Chain Network Design Problem: {{A}} Systematic Literature Review}, - author = {{Moreno-Camacho}, Carlos A and {Montoya-Torres}, Jairo R and Jaegler, Anicia and Gondran, Natacha}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {231}, - pages = {600--618}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.278}, - urldate = {2021-01-19}, - abstract = {Increasing pressure from governments and stakeholders has motivated the study of sustainability assessment in the supply chain context at operational, tactical, and strategic levels. Several papers have been published during the last two decades, and the number is still rising. Although several authors present complex models that include environmental and social assessment, the applicability and usefulness of these works is often limited by lack of data availability and lack of consensus in what is to be measured on implementations of sustainable practices and strategies. This paper presents a systematic literature review of works addressing the supply chain network design (SCND) problem, in which at least two of the three dimensions of sustainability are assessed. This paper aims to identify indicators that are used when sustainability is evaluated in real applied cases. A total of 113 papers from 2015 to 2018 were selected, including documents studying forward, reverse, and closed loop supply chains (CLSC). Indicators in the economic, environmental, and social dimensions were classified according to an existing framework in the sustainable supply chain literature. The review finds a highlighted emphasis on environmental considerations; social criteria are still hardly studied. The study country origin analysis also shows an increasing concern for sustainable practices in developing economies, mainly in Asia. Finally, this paper presents a brief description of the areas where research opportunities exist, including sectors, measures, and methodologies to assess sustainability in the SCND problem.}, - keywords = {Literature review,Metrics,Real cases,Supply chain network design,Sustainability}, - file = {/Users/fabio/Zotero/storage/9KVBH98B/full-text.pdf} -} - -@article{morenoIntroducing15MinuteCity2021, - title = {Introducing the ``15-{{Minute City}}'': {{Sustainability}}, {{Resilience}} and {{Place Identity}} in {{Future Post-Pandemic Cities}}}, - shorttitle = {Introducing the ``15-{{Minute City}}''}, - author = {Moreno, Carlos and Allam, Zaheer and Chabaud, Didier and Gall, Catherine and Pratlong, Florent}, - year = {2021}, - month = mar, - journal = {Smart Cities}, - volume = {4}, - number = {1}, - pages = {93--111}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2624-6511}, - doi = {10.3390/smartcities4010006}, - urldate = {2022-10-17}, - abstract = {The socio-economic impacts on cities during the COVID-19 pandemic have been brutal, leading to increasing inequalities and record numbers of unemployment around the world. While cities endure lockdowns in order to ensure decent levels of health, the challenges linked to the unfolding of the pandemic have led to the need for a radical re-think of the city, leading to the re-emergence of a concept, initially proposed in 2016 by Carlos Moreno: the ``15-Minute City''. The concept, offering a novel perspective of ``chrono-urbanism'', adds to existing thematic of Smart Cities and the rhetoric of building more humane urban fabrics, outlined by Christopher Alexander, and that of building safer, more resilient, sustainable and inclusive cities, as depicted in the Sustainable Development Goal 11 of the United Nations. With the concept gaining ground in popular media and its subsequent adoption at policy level in a number of cities of varying scale and geographies, the present paper sets forth to introduce the concept, its origins, intent and future directions.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {15-minute city,Carlos Moreno,collective intelligence,humane cities,proximity,smart cities,sustainability,urbanism,walkability}, - file = {/Users/fabio/Zotero/storage/B3PMD466/Moreno et al_2021_Introducing the “15-Minute City”.pdf;/Users/fabio/Zotero/storage/QMVCG9YV/6.html} -} - -@article{MorenoNieto2018, - title = {Large-Format Polymeric Pellet-Based Additive Manufacturing for the Naval Industry}, - author = {Moreno Nieto, Daniel and Casal L{\'o}pez, Victor and Molina, Sergio Ignacio}, - year = {2018}, - month = oct, - journal = {Additive Manufacturing}, - volume = {23}, - pages = {79--85}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2018.07.012}, - urldate = {2021-05-14}, - abstract = {Polymeric Pellet-Based Additive Manufacturing (PPBAM) systems are increasing in the field of 3D printing as a result of the evolution of additive technologies as their development process consolidates and expands. New opportunities for industrial integration of additive manufacturing (AM) technologies are identified, including AM of large polymeric parts. The PPBAM process consists of adapting a pellet-fed extrusion mechanism to a displacement system, either a Cartesian mechanism or a robotic arm system, building parts in a multi-layered approach. This use is justified by the extruded filament sizes required and the material costs when facing large-format prints. In this article, a pellet extrusion based printer prototype is presented together with a case study. The case study consists of the development of a two cubic meter capacity plastic part for the naval industry with a topology optimization design approach and material selection and validation methodology for a large-volume pellet based extrusion system. Two functional prototypes were developed with the selected materials from the explained methodology a PLA and a flame retardant ABS, and post processed to full fill the actual product\textasciiacute s specifications.}, - keywords = {3D printing,Fused filament fabrication,Large format additive manufacturing,Materials,Shipyard 4.0}, - file = {/Users/fabio/Zotero/storage/HZ4N2KTZ/Moreno Nieto, Casal López, Molina - 2018 - Large-format polymeric pellet-based additive manufacturing for the naval industry.pdf} -} - -@article{morettiCradletograveLifeCycle2021, - title = {Cradle-to-Grave Life Cycle Assessment of Single-Use Cups Made from {{PLA}}, {{PP}} and {{PET}}}, - author = {Moretti, Christian and Hamelin, Lorie and Jakobsen, Line Geest and Junginger, Martin H and Steingrimsdottir, Maria Magnea and H{\o}ibye, Linda and Shen, Li}, - year = {2021}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {169}, - pages = {105508}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105508}, - urldate = {2021-02-28}, - file = {/Users/fabio/Zotero/storage/GUX9H6D2/full-text.pdf} -} - -@article{morettiInprocessMonitoringPart2021, - title = {In-Process Monitoring of Part Warpage in Fused Filament Fabrication through the Analysis of the Repulsive Force Acting on the Extruder}, - author = {Moretti, M. and Senin, N.}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - pages = {102505}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102505}, - urldate = {2021-11-30} -} - -@article{morettiInprocessSimulationExtrusion2020, - title = {In-Process Simulation of the Extrusion to Support Optimisation and Real-Time Monitoring in Fused Filament Fabrication}, - author = {Moretti, M. and Rossi, A. and Senin, N.}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - pages = {101817}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101817}, - urldate = {2021-01-01} -} - -@article{Morgan2021, - title = {Ten Simple Rules for Hitting a Home Run with Your Elevator Pitch}, - author = {Morgan, Whitney Rachel and Wright, Erik Scott}, - year = {2021}, - journal = {PLoS Computational Biology}, - volume = {17}, - number = {3}, - pages = {1--5}, - issn = {15537358}, - doi = {10.1371/JOURNAL.PCBI.1008756}, - isbn = {1111111111}, - pmid = {33735178}, - file = {/Users/fabio/Zotero/storage/83P4RXR9/journal.pcbi.1008756.pdf} -} - -@inproceedings{Moritz2016, - title = {Value Creation in Open-Source Hardware Communities: {{Case}} Study of {{Open Source Ecology}}}, - booktitle = {2016 Portl. {{Int}}. {{Conf}}. {{Manag}}. {{Eng}}. {{Technol}}.}, - author = {Moritz, Manuel and Redlich, Tobias and Grames, Patrick P. and Wulfsberg, Jens P.}, - year = {2016}, - month = sep, - pages = {2368--2375}, - publisher = {{IEEE}}, - doi = {10.1109/PICMET.2016.7806517} -} - -@article{moroUmbrellaReviewProductservice2023, - title = {An Umbrella Review of Product-Service Systems: {{Analysis}} of Review Papers Characteristics, Research Trends and Underexplored Topics}, - shorttitle = {An Umbrella Review of Product-Service Systems}, - author = {Moro, Suzana Regina and {Cauchick-Miguel}, Paulo A. and {Henrique de Sousa Mendes}, Glauco and {Sousa-Zomer}, Thayla Tavares}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - pages = {136398}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136398}, - urldate = {2023-02-13}, - abstract = {Product-Service systems (PSS) is a somewhat established field, and many literature reviews looking at the state-of-the-art in PSS research have been conducted. Nevertheless, a broad picture of all research developed over the years and the progress of the field is still missing. Aiming to provide a clear picture of how the literature has evolved over the years and the status of the body of knowledge on the topic, this paper analyzes PSS-related literature review papers, identifies what aspects of this body of research are well developed, the progress achieved so far and remaining underexplored topics. An umbrella review (i.e., a review of reviews) was conducted, selecting 45 PSS-related review papers. The characteristics of the reviews are classified according to seven review types. A PSS-related literature review timeline is developed, divided into four research periods according to the publications' focus (themes, macro-topics and topics), similarities, timeframe, and review types. The results show that descriptive reviews are the most common in PSS-related literature. The paper provides a general picture of PSS-related literature review papers, focusing on the review types, thematic evolution, topics covered by the analyzed reviews, and underexplored research topics that could contribute to bring new insights to PSS-related research. There is a lack of quantitative studies in PSS literature; therefore, meta-analyses have not been developed in the area until now. Research on PSS business model and innovation topics are scare, and could be connected with marketing and strategy. The research opportunities highlighted in this study offer a broader perspective to readers as those cover the point of view of different authors from different research fields. More studies synthesizing the results of PSS-related research and contrasting the opinions of the different research communities should be conducted to advance PSS knowledge.}, - langid = {english}, - keywords = {Integrated product-service,Literature review,Product-service system,Review of reviews,Servitization}, - file = {/Users/fabio/Zotero/storage/5527QM2G/S0959652623005565.html} -} - -@article{Morrow2007, - title = {Environmental Aspects of Laser-Based and Conventional Tool and Die Manufacturing}, - author = {Morrow, W.R. and Qi, H. and Kim, I. and Mazumder, J. and Skerlos, S.J.}, - year = {2007}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {15}, - number = {10}, - pages = {932--943}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2005.11.030}, - abstract = {Solid Freeform Fabrication (SFF) technologies such as Direct Metal Deposition (DMD) have made it possible to eliminate environmentally polluting supply chain activities in the tooling industry and to repair and remanufacture valuable tools and dies. In this article, we investigate three case studies to reveal the extent to which DMD-based manufacturing of molds and dies can currently achieve reduced environmental emissions and energy consumption relative to conventional manufacturing pathways. It is shown that DMD's greatest opportunity to reduce the environmental impact of tool and die manufacturing will come from its ability to enable remanufacturing. Laser-based remanufacturing of tooling is shown to reduce cost and environmental impact simultaneously, especially as the scale of the tool increases. ?? 2006 Elsevier Ltd. All rights reserved.}, - isbn = {0959-6526}, - keywords = {Environmentally conscious manufacturing,Life cycle engineering,Remanufacturing,Solid Freeform Fabrication,Sustainable production}, - file = {/Users/fabio/Zotero/storage/222Y9EF4/Morrow et al. - 2007 - Environmental aspects of laser-based and conventional tool and die manufacturing.pdf} -} - -@article{Morseletto2020, - title = {Targets for a Circular Economy}, - author = {Morseletto, Piero}, - year = {2020}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {153}, - pages = {104553}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104553}, - file = {/Users/fabio/Zotero/storage/Q9483BLT/Targets for a circular economy.pdf} -} - -@article{morselettoCallHighqualityData2023, - ids = {morseletto2023a}, - title = {A Call for High-Quality Data to Foster a Decisive Transformation towards a Circular Economy}, - author = {Morseletto, Piero and Haas, Willi}, - year = {2023}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {197}, - pages = {107092}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2023.107092}, - urldate = {2023-08-13}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/287ZLX5U/Morseletto y Haas - 2023 - A call for high-quality data to foster a decisive .pdf;/Users/fabio/Zotero/storage/P2D6PVNV/S0921344923002288.html} -} - -@article{morselettoSometimesLinearSometimes2023, - title = {Sometimes Linear, Sometimes Circular: {{States}} of the Economy and Transitions to the Future}, - shorttitle = {Sometimes Linear, Sometimes Circular}, - author = {Morseletto, Piero}, - year = {2023}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {390}, - pages = {136138}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136138}, - urldate = {2023-02-09}, - abstract = {A common thread in the circular economy literature is the linear\textendash circular contrast. This study shows that the economy has always been a mix of circular and linear applications but in varying proportions. Furthermore, the scrutiny of emblematic examples both reveals misconceptions and enriches the extant knowledge of both frameworks and their relationship. This study also explains which aspects encourage an economy to lean towards either~the linear or the circular (i.e., profit, scarcity, circumstances, and business opportunities), why the economy should be circular, and which factors (e.g., redundancy, overproduction, fast consumption) prevent the systematic application of circular practices by favouring the throwaway society. The lock-ins/systemic path-dependent forces that underpin and perpetuate the linear economy are analysed together with their effects on the economic system. Finally, this study considers three pathways named `lessening', `sharing' and `valorising' for the diffusion of circular solutions and the disarticulation of the linear-economy drivers.}, - langid = {english}, - keywords = {Economic development,Economic history,Environmental sustainability,Linear and circular economy,Lock-ins,Transitions}, - file = {/Users/fabio/Zotero/storage/GJPRD87X/Morseletto - 2023 - Sometimes linear, sometimes circular States of th.pdf;/Users/fabio/Zotero/storage/8AW2QFJ9/S0959652623002962.html} -} - -@article{Mortara2016, - title = {Through Entrepreneurs' Eyes: The {{Fab-spaces}} Constellation}, - author = {Mortara, Letizia and Parisot, Nicolas Gontran}, - year = {2016}, - journal = {International Journal of Production Research}, - volume = {54}, - number = {23}, - pages = {7158--7180}, - publisher = {{Taylor \& Francis}}, - issn = {0020-7543}, - doi = {10.1080/00207543.2016.1198505}, - abstract = {Fabrication spaces (Fab-spaces) provide individuals with access to numerous manufacturing equipment (including additive manufacturing), to carry out different types of projects. Although scholars are starting to speculate about the importance of these new organisational forms and their potential for future distributed innovation and production ecologies, this phenomenon is still largely unexplored. Building on existing multidisciplinary research, this paper offers the first empirical analysis of existing fab-spaces as providers of knowledge and production competencies. Amongst all the possible perspectives to derive a framework, we choose that of fab-space users who have an entrepreneurial intention. After deriving an analytical framework to position fab-spaces in the current academic discourse, the paper develops a classification, which considers the competences available to entrepreneurs, via fab-spaces, in conjunction with how these competences are provided. The resulting map reveals the complementarities amongst the different fab-spaces. It also shows that the current portfolio of fab-spaces supports mainly the distribution of innovation across locations and social groups. Several types of fab-spaces are currently well placed to support the transition from innovation to manufacturing, but their geographical distribution and range of manufacturing capabilities are not yet enough to provide a fully distributed manufacturing model. This study has practical consequences for entrepreneurs, in the better identification of the appropriate fab-spaces for their needs, and for policy-makers, to help position the different types of fab-spaces as elements for national systems of innovation and production.}, - keywords = {3d printing,3D printing,additive manufacturing,business models classi fi,business models classification,cation,cluster analysis,entrepreneurship,fablabs,FabLabs,fabrication spaces,hakerspaces,innovation,makers,makerspaces,peer production,techshops,TechShops}, - file = {/Users/fabio/Zotero/storage/WQ6M7CTC/Through entrepreneurs’ eyes the Fab-spaces constellation.pdf} -} - -@inproceedings{Mosaddek2018, - title = {Design and {{Testing}} of a {{Recycled 3D Printed}} and {{Foldable Unmanned Aerial Vehicle}} for {{Remote Sensing}}}, - booktitle = {2018 {{International Conference}} on {{Unmanned Aircraft Systems}} ({{ICUAS}})}, - author = {Mosaddek, Akif and Kommula, Hrushi K. R. and Gonzalez, Felipe}, - year = {2018}, - month = jun, - pages = {1207--1216}, - publisher = {{IEEE}}, - doi = {10.1109/ICUAS.2018.8453284}, - isbn = {978-1-5386-1354-2}, - file = {/Users/fabio/Zotero/storage/DB5WMQSV/Design and Testing of a Recycled 3D Printed and Foldable Unmanned Aerial Vehicle for Remote Sensing.pdf} -} - -@article{moslingerCircularEconomyWaste2023, - title = {Circular Economy and Waste Management to Empower a Climate-Neutral Urban Future}, - author = {M{\"o}slinger, Margot and Ulpiani, Giulia and Vetters, Nadja}, - year = {2023}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {421}, - pages = {138454}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.138454}, - urldate = {2023-08-31}, - abstract = {To mitigate climate change while catering to the needs of a growing population, cities need to find smarter ways to manage their resources, while reducing their greenhouse gas emissions. Since waste management and circular economy will be instrumental in this endeavour, the current level of circularity in cities, the environmental impact of related activities and sharable best practices need to be explored. This paper examines the roadmap to zero emissions of the 362 cities that expressed interest in the Horizon Europe 100 Climate-Neutral and Smart Cities Mission. Based on an unprecedented suite of city inputs, this study answers a set of research questions so far unaddressed due to the lack of a suitable dataset. The analysis focusses on a) current actions undertaken by cities in achieving a circular economy and reducing/optimising waste streams, b) envisioned circular actions in supporting climate neutrality by 2030, and c) urban sectors and metabolic flows for which circularity has a particularly high potential to mitigate climate change. Best practices are captured to create an informative set of actions aimed at policy-makers and at encouraging peer-to-peer learning. Finally, the barriers to incrementing circular approaches that emerge from the cities' self-assessments are compared to those identified in existing scientific literature to provide input for a more comprehensive conceptual framework. Overall, this study distils how circular economy imaginaries are translated into local governance and policy-making by focussing on a large group of cities. This is key to truly understand why some initiatives fail and others succeed and can inform all relevant stakeholders on the next steps to take.}, - keywords = {Circular economy,Climate neutrality,Green transition,Waste-to-energy,Wastewater management,Zero-emission cities}, - file = {/Users/fabio/Zotero/storage/X8YIIUYZ/S0959652623026124.html} -} - -@article{mostaghelTransformativeImpactCircular2023, - title = {The Transformative Impact of the Circular Economy on Marketing Theory}, - author = {Mostaghel, Rana and Oghazi, Pejvak and Lisboa, Ana}, - year = {2023}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {195}, - pages = {122780}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122780}, - urldate = {2023-08-31}, - abstract = {The circular economy (CE) is growing, and an increasing number of businesses are becoming aware of it. Demand from customers and new regulations from policymakers motivated many practitioners to transform their business models into circular business models. However, academia has not followed the same pace. Considering that the circular economy encloses unique attributes, it is crucially required to re-frame traditional marketing strategy theories. This article rigorously investigates marketing theory and practice in the CE, identifies the challenges of marketing in the CE, and introduces a new definition of marketing and additional stimulus in the marketing mix. Further, the article provides theoretical and managerial implications.}, - keywords = {Circular Business Model,Circular Economy,Marketing,Strategy,Theory,Theory-in-use}, - file = {/Users/fabio/Zotero/storage/43HKEHC9/Mostaghel et al_2023_The transformative impact of the circular economy on marketing theory.pdf;/Users/fabio/Zotero/storage/4FMQCFC3/S0040162523004651.html} -} - -@inproceedings{Mota2011, - title = {The Rise of Personal Fabrication}, - booktitle = {Proceedings of the 8th {{ACM}} Conference on {{Creativity}} and Cognition - {{C}}\&{{C}} '11}, - author = {Mota, Catarina}, - year = {2011}, - pages = {279}, - publisher = {{ACM Press}}, - address = {{New York, New York, USA}}, - doi = {10.1145/2069618.2069665}, - abstract = {In recent years we have been witnessing the first stages of a democratization of manufacturing, a trend that promises to revolutionize the means of design, production and distribution of material goods and give rise to a new class of creators and producers. A disruptive technology and several cultural and economic driving forces are leading to what has already been called a new industrial revolution: public access to digital fabrication tools, software and databases of blueprints; a tech Do-It-Yourself movement; and a growing desire amongst individuals to shape and personalize the material goods they consume. This paper is an overview of the current state of personal digital fabrication and the trends that are shaping it.}, - isbn = {978-1-4503-0820-5}, - keywords = {Democratizing creativity,Democratizing innovation,Digital fabrication,Distributed production.,Do-it-yourself}, - file = {/Users/fabio/Zotero/storage/RBDS92V9/The Rise of Personal Fabrication.pdf} -} - -@book{Moulaert2014, - title = {The International Handbook on Social Innovation: {{Collective}} Action, Social Learning and Transdisciplinary Research}, - author = {Moulaert, Frank and MacCallum, Diana and Hamdouch, Abdelillah and Mehmood, Abid}, - year = {2014}, - edition = {illustrated, reprint}, - pages = {1--500}, - publisher = {{Edward Elgar}}, - isbn = {978-1-78254-559-0} -} - -@article{Moultrie2007b, - title = {Innovation {{Spaces}}: {{Towards}} a {{Framework}} for {{Understanding}} the {{Role}} of the {{Physical Environment}} in {{Innovation}}}, - author = {Moultrie, James and Nilsson, Mikael and Dissel, Marcel and Haner, Udo-Ernst Ernst and Janssen, Sebastiaan and {Van der Lugt}, Remko}, - year = {2007}, - journal = {Creativity and Innovation Management}, - volume = {16}, - number = {1}, - pages = {53--65}, - issn = {0963-1690}, - doi = {10.1111/j.1467-8691.2007.00419.x}, - abstract = {Firms are paying increasing attention to the physical environments in which creative and innovative activities take place. These environments reflect the firm's strategic intentions towards innovation and provide a physical embodiment of their desired modes of working. To date, this new phenomenon has received little academic attention. Based on both literature and also the authors' combined experiences through observing firms in Europe, this paper proposes a simple framework to aid practitioners and academics to better understand the design, role and goals of such spaces.}, - isbn = {1467-8691}, - pmid = {45132354}, - file = {/Users/fabio/Zotero/storage/6YXWBIQM/Innovation Spaces Towards a Framework for Understanding the Role of the Physical Environment in Innovation.pdf} -} - -@article{Moultrie2015, - ids = {Moultrie2015correction}, - title = {Understanding and Classifying the Role of Design Demonstrators in Scientific Exploration}, - author = {Moultrie, James}, - year = {2015}, - month = sep, - journal = {Technovation}, - volume = {43--44}, - pages = {1--16}, - publisher = {{Elsevier Ltd}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2015.05.002}, - urldate = {2020-05-23}, - abstract = {Abstract This paper describes the development of a model for classifying the different type of 'design demonstrator' that might be used in translating scientific activity from the laboratory to the market. Two detailed case studies are described in which designers worked closely with scientists. In one of the projects, the scientists were seeking to commercialise their research. In the other, the research was at an early stage and the scientists had not considered commercialisation. Different types of physical artefact produced in these collaborative projects were analysed to identify the extent to which they might contribute to science, technology, application or market. Evidence indicates that demonstrators might fulfil multiple purposes and that the translation from science to market is more complicated than is often shown in linear models. An original classification of the role of demonstrators through this journey is provided.}, - keywords = {Boundary objects,Design,Design demonstrator,Technology demonstrator,Technology transfer}, - file = {/Users/fabio/Zotero/storage/L9EJ9WZT/full-text.pdf;/Users/fabio/Zotero/storage/SSD84CEE/Understanding and classifying the role of design demonstrators in scientific exploration (correction).pdf} -} - -@inproceedings{Moylan2012, - title = {Proposal for a Standardized Test Artifact for Additive Manufacturing Machines and Processes}, - booktitle = {Proceedings of the {{Solid Freeform Fabrication Symposium}}}, - author = {Moylan, Shawn and Slotwinski, John and Cooke, April and Jurrens, Kevin and Donmez, M. Alkan}, - year = {2012}, - pages = {902--920}, - file = {/Users/fabio/Zotero/storage/SCX6Z4YD/Proposal for a standardized test artifact for additive manufacturing machines and processes.pdf} -} - -@article{Mu2019, - title = {Surface Modification of Prototypes in Fused Filament Fabrication Using Chemical Vapour Smoothing}, - author = {Mu, Mulan and Ou, Chun-Yen and Wang, Junjie and Liu, Yongliang}, - year = {2019}, - month = nov, - journal = {Additive Manufacturing}, - pages = {100972}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100972} -} - -@article{muazuIntegratingLifeCycle2021, - title = {Integrating {{Life Cycle Assessment}} and {{Environmental Risk Assessment}}: {{A}} Critical Review}, - author = {Muazu, Rukayya Ibrahim and Rothman, Rachael and Maltby, Lorraine}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {293}, - pages = {126120}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126120}, - urldate = {2021-02-14} -} - -@article{mubarikResilienceCleanerProduction2021, - title = {Resilience and Cleaner Production in Industry 4.0: {{Role}} of Supply Chain Mapping and Visibility}, - author = {Mubarik, Muhammad Shujaat and Naghavi, Navaz and Mubarik, Mobashar and {Kusi-Sarpong}, Simonov and Khan, Sharfuddin Ahmed and Zaman, Syed Imran and Kazmi, Syed Hasnain Alam}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {292}, - pages = {126058}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126058}, - urldate = {2021-02-14} -} - -@inproceedings{Muchtar2018, - title = {{{ToMRobot}}: {{A}} Low-Cost Robot for {{MANET}} Testbed}, - booktitle = {2018 Fifth Int. {{Conf}}. {{Parallel}}, Distrib. {{Grid}} Comput.}, - author = {Muchtar, Farkhana and Singh, Pradeep Kumar and Kumar, Yugal and Ariffin, Asma Hanee and Fadilah, Suzi Iryanti and Yusoff, Mohd. Najwadi}, - year = {2018}, - month = dec, - pages = {54--59}, - publisher = {{IEEE}}, - doi = {10.1109/PDGC.2018.8745838}, - isbn = {978-1-72810-646-5}, - file = {/Users/fabio/Zotero/storage/6YR86RMF/Muchtar et al_2018_ToMRobot.pdf} -} - -@article{Mueller1999, - title = {Laminated Object Manufacturing for Rapid Tooling and Patternmaking in Foundry Industry}, - author = {Mueller, Bernhard and Kochan, Detlef}, - year = {1999}, - journal = {Computers in Industry}, - volume = {39}, - number = {1}, - pages = {47--53}, - issn = {01663615}, - doi = {10.1016/S0166-3615(98)00127-4}, - abstract = {The laminated object manufacturing (LOM) process is an effective rapid prototyping technology with a variety of application possibilities. Applying LOM in rapid tooling and patternmaking is especially advantageous because of the LOM objects' robustness, their wood-like properties and their comparably low material costs. Possible fields of application are shown in the following. Explicit application examples in sand casting, investment casting and ceramics processing show how a reduction of necessary process steps and cycle times can be achieved by the application of LOM models. To gain this the control of the LOM objects' accuracy and stability during different secondary processes is of decisive importance.}, - isbn = {0166-3615}, - keywords = {foundry industry,laminated object manufacturing \v{z},lom,rapid prototyping,rapid tooling and patternmaking}, - file = {/Users/fabio/Zotero/storage/A6WT7B4M/Mueller, Kochan - 1999 - Laminated object manufacturing for rapid tooling and patternmaking in foundry industry.pdf} -} - -@book{Mueller2012, - title = {Additive {{Manufacturing Technologies}}}, - author = {Gibson, Ian and Rosen, David W. and Stucker, Brent}, - year = {2010}, - month = apr, - journal = {Assembly Automation}, - volume = {32}, - publisher = {{Springer US}}, - address = {{Boston, MA}}, - issn = {0144-5154}, - doi = {10.1007/978-1-4419-1120-9}, - urldate = {2014-12-09}, - isbn = {978-1-4419-1119-3}, - file = {/Users/fabio/Zotero/storage/EDY7BNTG/Gibson, Rosen, Stucker - 2010 - Additive Manufacturing Technologies.pdf} -} - -@article{mufanEcologicalSocioeconomicImpacts2021, - title = {Ecological and Socioeconomic Impacts of Payments for Ecosystem Services \textendash{} {{A Chinese}} Garlic Farm Case}, - author = {Mufan, Zhuang and Yong, Geng and Hengyu, Pan and Fei, Wu and Dong, Wu}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {285}, - pages = {124866}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124866}, - urldate = {2021-04-29}, - abstract = {Payments for ecosystem services (PES) is one effective approach to address serious ecological degradation caused by rapid socio-economic development. However, inappropriate PES policy can cause conflicts among stakeholders. Uncovering the ecological and socioeconomic impacts of PES is crucial to achieve sustainable development. Focusing on donor-side and receiver-side impacts of PES, this study proposes a systematic evaluation framework based on improved emergy analysis and cost-benefit accounting. A garlic farm in Xizhou Town, Yunnan Province, where conflicts between local famers and government arise after enacting the garlic banning policy, is adopted as the study case. After reviewing the local garlic cultivation situation for the period of 2014\textendash 2018 and conducting site investigations, three scenarios, including Traditional Planting Mode (TPM), Alternative Planting Mode (APM) and Ecological Planting Mode (EPM), are set up and compared based on local characteristics. Results show that natural conditions, market price and cultivated land area affect emergy inputs and the overall sustainability. Both environmental load and pollution impacts have been decreased, while the overall sustainability has been significantly improved after the implementation of the APM policy. However, from per household income perspective, the results are completely opposite because per household income has been greatly reduced. EPM has remarkably increased economic and ecological benefits from both aspects compared with TPM, though is still inferior to APM in terms of total ecological impact. Several policy suggestions are proposed, including generalizing EPM, increasing compensation amount and capacity-building efforts.}, - keywords = {Cost-benefit accounting,Emergy analysis,Garlic planting,Impacts evaluation,Payments for ecosystem services} -} - -@article{Muise2016, - title = {Attitudes to the Recovery and Recycling of Agricultural Plastics Waste: {{A}} Case Study of {{Nova Scotia}}, {{Canada}}}, - author = {Muise, Isaac and Adams, Michelle and C{\^o}t{\'e}, Ray and Price, G.W.}, - year = {2016}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {109}, - pages = {137--145}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2016.02.011} -} - -@article{Mukherjee2011, - title = {{{PLA Based Biopolymer Reinforced}} with {{Natural Fibre}}: {{A Review}}}, - author = {Mukherjee, Tapasi and Kao, Nhol}, - year = {2011}, - month = jul, - journal = {Journal of Polymers and the Environment}, - volume = {19}, - number = {3}, - pages = {714--725}, - issn = {1566-2543}, - doi = {10.1007/s10924-011-0320-6}, - urldate = {2014-07-23}, - keywords = {\'a bio-based fibres \'a,pla \'a natural fibres}, - file = {/Users/fabio/Zotero/storage/5A3W6YXK/Mukherjee, Kao - 2011 - PLA Based Biopolymer Reinforced with Natural Fibre A Review.pdf} -} - -@article{mulakkalAdvancingMechanicalRecycling2021, - title = {Advancing Mechanical Recycling of Multilayer Plastics through Finite Element Modelling and Environmental Policy}, - author = {Mulakkal, Manu C. and Castillo Castillo, Arturo and Taylor, Ambrose C. and Blackman, Bamber R.K. and Balint, Daniel S. and Pimenta, Soraia and Charalambides, Maria N.}, - year = {2021}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {166}, - pages = {105371}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105371}, - urldate = {2021-01-01} -} - -@article{muletAnalysisAttachmentFactors2022, - title = {Analysis of Attachment Factors in Small Household {{EEE}}: {{An}} Opportunity toward the Circular Economy}, - author = {Mulet, Elena and Chulvi, Vicente and Royo, Marta}, - year = {2022}, - month = apr, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13267}, - urldate = {2022-04-11}, - abstract = {Despite the fact that one of the goals of the circular economy is that products can be used for as long as possible, existing data show that the number of years that small household appliances are used until they are replaced is not increasing and is even decreasing in some cases. This work focuses on product attachment as a strategy to slow down the replacement of the product and, consequently, to lengthen product life, thereby preventing psychological obsolescence. To this end, a representative sample of 70 small household appliances with attachment-related characteristics was analyzed to identify which of the 38 attachment strategies listed in the emotional durability design nine tools they contain. As a result, the most frequently used strategies are "design for animacy," "design for variability and modularity," and "connection or community belonging." Furthermore, 13 of the 38 strategies do not appear in this type of product and the strategies vary to a greater or lesser extent depending on the type of appliance. Therefore, there is still a lot of room at the design level to exploit attachment in this type of product, which could be very useful for business models based on life extension services. Moreover, the method applied to search for products on the web and to assign attachment strategies can also be used for other sectors and products.}, - keywords = {circular economy,electrical and electronic equipment (EEE),industrial ecology,product attachment,product design,product lifetime}, - file = {/Users/fabio/Zotero/storage/2636K9AB/full-text.pdf} -} - -@article{Mulgan2006, - title = {The Process of Social Innovation}, - author = {Mulgan, Geoff}, - year = {2006}, - month = apr, - journal = {Innov. Technol. Governance, Glob.}, - volume = {1}, - number = {2}, - pages = {145--162}, - publisher = {{MIT Press - Journals}}, - issn = {1558-2477}, - doi = {10.1162/itgg.2006.1.2.145}, - abstract = {Much of what we now take for granted in social life began as radical innovation. A century ago, few believed that ordinary people could be trusted to drive cars at high speed, the idea of a national health service freely available was seen as absurd- ly utopian, the concept of ...}, - file = {/Users/fabio/Zotero/storage/FJEGHXL4/Mulgan_2006_The process of social innovation.pdf} -} - -@article{Mulholland2019, - title = {Spatial-Temporal Dynamics of Social Value: {{Lessons}} Learnt from Two {{UK}} Nuclear Decommissioning Case Studies}, - author = {Mulholland, Cara and Ejohwomu, Obuks A. and Chan, Paul W.}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117677}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117677}, - urldate = {2020-05-21}, - abstract = {Recently, the concept of social value in construction has seen increasing policy, practice and research interest. In part, this interest stems from growing recognition that construction projects, and especially megaprojects, can create huge social impacts. Although many studies have focussed on defining and developing measures for quantifying social value, qualitative meanings and interpretations of these measures are relatively under-examined. In this paper, two instrumental case studies of infrastructure megaprojects in nuclear decommissioning are analysed to investigate the process of meaning-making of social value. Lessons are drawn from taking a more qualitative, dynamic and processual approach. The findings highlight the limitations of reductionism in existing quantitative measures and emphasise the importance of time and place in understanding the ever-changing idea (and ideals) of delivering social value. Social value is thus a condition of, and conditioned by, ongoing negotiations throughout the lifecycle. Adding to social value research that is dominated by quantitative studies, the nuances highlighted in the case studies show the need to move beyond static measures at a point in time to consider the ongoing and never-ceasing process of transforming social value in construction.}, - keywords = {Construction sustainability,Megaprojects,Nuclear decommissioning,Social value,Transformation}, - file = {/Users/fabio/Zotero/storage/LM8G9Z8H/full-text.pdf} -} - -@article{Muller-Seitz2010, - title = {Networking beyond the Software Code? An Explorative Examination of the Development of an Open Source Car Project}, - author = {{M{\"u}ller-Seitz}, Gordon and Reger, Guido}, - year = {2010}, - month = nov, - journal = {Technovation}, - volume = {30}, - number = {11-12}, - pages = {627--634}, - issn = {01664972}, - doi = {10.1016/j.technovation.2010.07.006} -} - -@book{Muller2018, - title = {Annual {{Report}} on {{European SMEs}} 2017-2018. {{SMEs}} Growing beyond Borders}, - author = {Muller, Patrice and Mattes, Anselm and Klitou, Demetrius and Lonkeu, Olivia-Kelly and Ramada, Paula and Ruiz, Francisco Aranda and Devnani, Shaan and Farrenkop, Johannes and Makowska, Agata and Mankovska, Nadiya and Robin, Nicholas and Steigertahl, Lisa}, - year = {2018}, - pages = {172}, - doi = {10.2873/248745}, - abstract = {Annual report on european SMEs 2017/2018}, - isbn = {978-92-79-96822-8} -} - -@article{Muller2019, - title = {Open Principles in New Business Models for Information Systems}, - author = {M{\"u}ller, Matthias and Vorraber, Wolfgang and Slany, Wolfgang}, - year = {2019}, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {1}, - issn = {21998531}, - doi = {10.3390/joitmc5010006}, - abstract = {Open source software and open innovation are an important resource for today's industries. Communities collaboratively create different kind of publicly available value, boosting innovation and also technology. However, whereas this value is generated and captured by various involved parties, the outcomes are, in many cases, commercialized by companies who build their business models on this openness. Thus, current business model representations used for these open systems mainly focus on the commercial side of companies, not directly regarding the value creation and distribution by the underlying communities. This results in a lack of potential representation of alternative value created by individuals and communities that are not necessarily aiming for direct monetary compensation. In this work, we show, by the example of open source projects, how communities create value and their potential to be represented by the upcoming domain of new business models. The emerging idea of new business models, based on sharing, collaboration, and the circular economy, not only considers economical viewpoints, but also social and ecological. New trends in research are intensively starting to investigate these models and how they can be brought to practice. The co-creation of value, collaboration of various actors, and following a shared vision are just some of the identified overlaps that are also essential for a potential representation of open communities. This first review unveils that new business models and open source software projects have a variety of aspects in common. We highlight the potential of open communities to be seen as new business models themselves, instead of just being a pure enabler for firms' business models. This approach is leaving room to explore new organizational and economical aspects of open ecosystems, enhancing the understanding of co-creative communities and the definition of collaborative value.}, - keywords = {Information systems,New business models,Open innovation,Open source software,Value co-creation}, - file = {/Users/fabio/Zotero/storage/ZTQ4AYFY/Open principles in new business models for information systems.pdf} -} - -@article{mullerEcosystemServicesLandscape2010, - title = {Ecosystem Services at the Landscape Scale: {{The}} Need for Integrative Approaches}, - author = {M{\"u}ller, Felix and {de Groot}, Rudolf and Willemen, Louise}, - year = {2010}, - month = oct, - journal = {Landscape Online}, - volume = {23}, - number = {1}, - pages = {1--11}, - issn = {18651542}, - doi = {10.3097/LO.201023}, - urldate = {2021-04-23}, - abstract = {During the symposium "Ecosystem Services at the Landscape Scale" from the EU-IALE conference 2009, several challenges for future research on approaches to use the concept of ecosystem services at the landscape scale were identified, focussing on the need for integration. Three main research directions were discussed, (i) the definition of the potentials and limitations of the ecosystem service approach for landscape analysis, (ii) the identification of suitable methods and tools to apply the ecosystem service approach at the landscape scale and (iii) the demand of incorporating ecosystem and landscape services in decision making and management. This paper briefly addresses and discusses some of these topics and puts them into a broader perspective. From this viewpoint it becomes obvious that many high-quality sectoral studies are carried out, e.g. concentrating on specific services or specific linkages within the "ecosystem service cascade" which describes the relation between biophysical characteristics of the landscape, their functions, services, benefits and values for society. In order to provide useful information for decision makers, ecosystem services studies should be supplemented by investigations of the whole systems of interactions between ecological processes and societal valuations. \textcopyright{} 2010 IALE-D.}, - keywords = {Ecosystem services,Integration,Landscapes,Methods,Research challenges}, - file = {/Users/fabio/Zotero/storage/KINVW488/full-text.pdf} -} - -@article{mullerIndicatorSideEcosystem2012, - title = {The Indicator Side of Ecosystem Services}, - author = {M{\"u}ller, Felix and Burkhard, Benjamin}, - year = {2012}, - month = jul, - journal = {Ecosystem Services}, - volume = {1}, - number = {1}, - pages = {26--30}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2012.06.001}, - urldate = {2021-04-23}, - abstract = {In this short welcome note for the new journal "Ecosystem Services", the main interrelations between the ecosystem service concept and the approach of ecological indicators are briefly discussed with respect to three key issues: at first, some definitions are analyzed to answer the question if ecosystem services can be understood as ecological indicators. Due to a positive answer, the position of ecosystem services in the DPSIR indicator framework is determined as the central impact component. It is stated that different viewpoints are possible to interrelate the services; an environmental starting point focusing on the linkage to ecological processes and functions on the one side, and the relations with human well-being criteria and management obligations on the other. Finally, the actual needs for further research and application are outlined from an indicator-based aspect and the broad field of potential contributions for the new journal is summarized. \textcopyright{} 2012 Elsevier B.V.}, - keywords = {Challenges,Cooperation,Ecological indicators,Ecosystem services}, - file = {/Users/fabio/Zotero/storage/ZVAAVVX7/full-text.pdf} -} - -@article{Munguia2008, - title = {Pursuing Successful Rapid Manufacturing: A Users' Best-Practices Approach}, - author = {Mungu{\'i}a, Javier and Ciurana, Joaquim De and Riba, Carles}, - year = {2008}, - journal = {Rapid Prototyping Journal}, - volume = {14}, - number = {3}, - pages = {173--179}, - issn = {1355-2546}, - doi = {10.1108/13552540810878049}, - abstract = {Pursuing successful rapid manufacturing: a users' best-practices approach}, - isbn = {1355254081084}, - keywords = {best practice,paper type research paper,rapid prototypes,spain,standards}, - file = {/Users/fabio/Zotero/storage/3VVILA49/Munguía, Ciurana, Riba - 2008 - Pursuing successful rapid manufacturing a users' best-practices approach.pdf} -} - -@article{munierParadoxeSchumpeterienOu2013, - ids = {munier2013a}, - title = {{Le paradoxe schump\'et\'erien ou l'absence de \guillemotleft ~Schumpeter Mark~II~\guillemotright. \`A propos de l'\'evolution de la Th\'eorie de l'\'evolution \'economique}}, - shorttitle = {{Le paradoxe schump\'et\'erien ou l'absence de \guillemotleft ~Schumpeter Mark~II~\guillemotright}}, - author = {Munier, Francis}, - year = {2013}, - journal = {Innovations}, - volume = {42}, - number = {3}, - pages = {195--210}, - publisher = {{De Boeck Sup\'erieur}}, - address = {{Louvain-la-Neuve}}, - issn = {1267-4982}, - doi = {10.3917/inno.042.0195}, - urldate = {2022-11-28}, - abstract = {Le paradoxe schump\'et\'erien est une interpr\'etation des n\'eo-schump\'et\'eriens qui consid\`erent que la pens\'ee de J.-A. Schumpeter se singularise par une contradiction sur la question de la relation entre la taille des entreprises et leurs capacit\'es novatrices. Nous rejetons cette interpr\'etation en montrant que l'\oe uvre rev\^et une v\'eritable unit\'e th\'eorique. Seul un \guillemotleft ~glissement~\guillemotright{} de point de vue appara\^it sur le plan m\'ethodologique, mais l\`a aussi des nuances doivent \^etre apport\'ees au regard des assertions n\'eo-schump\'et\'eriennes.Codes JEL~: B10}, - langid = {french}, - keywords = {entrepreneur,\'evolution,innovation,paradoxe schump\'et\'erien,taille de la firme}, - file = {/Users/fabio/Documents/0-Biblio/Innovation\:Frances/INNO_042_0195.pdf;/Users/fabio/Zotero/storage/PRGJXH58/revue-innovations-2013-3-page-195.html} -} - -@inproceedings{Munoz2019, - title = {{{OpenTestBed}}: {{Poor}} Man's {{IoT}} Testbed}, - booktitle = {{{IEEE INFOCOM}} 2019 - {{IEEE}} Conf. {{Comput}}. {{Commun}}. {{Work}}. ({{INFOCOM WKSHPS}})}, - author = {Munoz, Jonathan and Rincon, Fabian and Chang, Tengfei and Vilajosana, Xavier and Vermeulen, Brecht and Walcarius, Thijs and {van de Meerssche}, Wim and Watteyne, Thomas}, - year = {2019}, - month = apr, - pages = {467--471}, - publisher = {{IEEE}}, - doi = {10.1109/INFCOMW.2019.8845269}, - isbn = {978-1-72811-878-9} -} - -@article{muradianEcosystemServicesNature2021, - ids = {muradian2021a}, - title = {Beyond Ecosystem Services and Nature's Contributions: {{Is}} It Time to Leave Utilitarian Environmentalism Behind?}, - author = {Muradian, Roldan and {G{\'o}mez-Baggethun}, Erik}, - year = {2021}, - month = jul, - journal = {Ecological Economics}, - volume = {185}, - pages = {107038}, - publisher = {{Elsevier B.V.}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107038}, - urldate = {2021-04-29}, - abstract = {The Nature's Contributions to People (NCP) approach, developed as theoretical backdrop for the assessments of the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES), aims to provide a more inclusive discourse in sustainability science, while addressing some of the limitations of the ecosystem services (ES) framework. Some critical initial reactions to the NCP approach have revolved around the costs of departing from the ES concept, after its hard-won influence in science and policy. In this paper we argue that the main fault of the NCP approach is precisely the opposite. Namely, to claim to be nurturing a paradigm shift while perpetuating, under a new jargon, the most problematic tenets of the ES framework and utilitarian environmentalism in general. These include a dualistic, anthropocentric and utilitarian representation of human-nature relationships, which, we argue, are among the ultimate reasons behind the global environmental crisis. We propose a departure from the prevailing ontological conception, moral framing and legal coding of human-nature relationships. Specifically, a shift from a morality of utility to a morality of care, a reallocation of property rights, and the extension of the community of justice to non-human entities.}, - keywords = {Ecosystem services,Human-nature relationships,Nature's contribution to people,Nature's contribution to people,Sustainability discourses}, - file = {/Users/fabio/Zotero/storage/PV67CPT9/Muradian_Gómez-Baggethun_2021_Beyond ecosystem services and nature's contributions.pdf;/Users/fabio/Zotero/storage/8LD9FRG9/S0921800921000963.html} -} - -@article{muradianReconcilingTheoryPractice2010, - title = {Reconciling Theory and Practice: {{An}} Alternative Conceptual Framework for Understanding Payments for Environmental Services}, - author = {Muradian, Roldan and Corbera, Esteve and Pascual, Unai and Kosoy, Nicol{\'a}s and May, Peter H.}, - year = {2010}, - month = apr, - journal = {Ecological Economics}, - volume = {69}, - number = {6}, - pages = {1202--1208}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2009.11.006}, - urldate = {2021-04-23}, - abstract = {This article provides an alternative and novel theoretical approach to the conceptualization and analysis of payments for environmental services (PES). We devote special emphasis to institutional and political economy issues, which have been somewhat neglected in the literature on PES. We argue that the Coasean and pure market approach dominating the conceptualization of PES in the literature cannot be easily generalized and implemented in practice. By contrast, taking into account complexities related to uncertainty, distributional issues, social embeddedness, and power relations permits acknowledging the variety of contexts and institutional settings in which PES operate. The alternative approach presented in this introductory article to the special section may be more appealing to PES practitioners, since while avoiding restrictive and prescriptive standpoints, it allows some key sources of complexities they usually deal with on the ground to be more easily understood. \textcopyright{} 2009 Elsevier B.V. All rights reserved.}, - keywords = {Institutions,Payment for environmental services,Political economy,Power relations,Social embeddedness} -} - -@article{Muranko2019, - title = {Circular Economy and Behaviour Change: {{Using}} Persuasive Communication to Encourage pro-Circular Behaviours towards the Purchase of Remanufactured Refrigeration Equipment}, - author = {Muranko, Zaneta and Andrews, Deborah and Chaer, Issa and Newton, Elizabeth J.}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {222}, - pages = {499--510}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.219}, - urldate = {2020-03-21}, - abstract = {Refrigerated Display Cabinets (RDCs) are used in the retail sector to display chilled and frozen food, and beverages. The manufacture of RDCs is typified by the extensive use of materials and energy, meaning that the development of a Circular Economy in this sector is particularly important. A number of behavioural barriers are preventing the development of the Circular Economy but an appropriate behaviour change intervention could help to overcome them. This paper investigates how effective the use of Persuasive Communication could be in influencing the Behavioural Attitudes, Product Perceptions and Behavioural Intentions towards the purchase of remanufactured RDCs. Participants in this study are engineers and academic experts of retail refrigeration equipment. The study was carried out in three consecutive stages. In the first stage participants completed a questionnaire, which assessed their Behavioural Attitudes, Product Perceptions and Behavioural Intentions. In the second stage participants were exposed to the intervention, which was the Persuasive Communication in the form of an audio-visual presentation. In the third stage participants completed a second questionnaire which assessed the impact of the intervention. The results show that the Persuasive Communication had a positive impact on the participants' Behavioural Attitudes, Product Perceptions and Behavioural Intentions towards the purchase of remanufactured RDCs. This paper demonstrates how effective this type of intervention could be, if developed further to create a target market and generate demand for remanufactured RDCs.}, - keywords = {Behaviour change,Circular business models,Circular economy,Persuasive communication,Pro-circular behaviour,Remanufacture} -} - -@article{Murr2009, - title = {Effect of Build Parameters and Build Geometries on Residual Microstructures and Mechanical Properties of {{Ti-6Al-4V}} Components Built by Electron Beam Melting ({{EBM}})}, - author = {Murr, L E and Gaytan, S M and Medina, F and Martinez, E and Hernandez, D H and Martinez, L and Lopez, M I and Wicker, R B and Collins, S}, - year = {2009}, - journal = {20th Annual International Solid Freeform Fabrication Symposium, SFF 2009}, - pages = {374--397}, - abstract = {In this study, involving additive manufacturing (AM) using electron beam melting (EBM), we have examined build defects which result from beam tripping, porosities (including unmelted or unsintered zones) due to excursions from optimal build parameters (especially variations in melt scan beam current and scan speed), and gas bubbles trapped in atomized Ti-6Al-4V starting powder as well as recycled powder, and retained in the build. At optimized build conditions we have also examined microstructure-mechanical property (hardness, tensile strength, and elongation) variations for multiple rake building and multiple melt scans using optical metallography and scanning and transmission electron microscopy (SEM and TEM). These build variances cause cooling rate variances which promote {$\alpha$}-phase growth and variations in dislocation density, as well as {$\alpha$}-to-{$\alpha{'}$} (martensite) phase changes, all of which produce some degree of mechanical property variations. These features (especially {$\alpha$}-to-{$\alpha$}' phase changes) are notable on comparing solid builds in comparison with a variety of mesh arrays where strut dimension and build-element complexities alter the cooling rates in a significant way. We illustrate these microstructure variations with corresponding variations in microindentation hardness measurements made directly on fine mesh (strut) structures. Finally, we have examined Ti-6Al-4V powder chemistries and solid build chemistries which for single-pass melt scans at optimized build conditions are shown to be relatively constant up to 40 cycles of powder reuse with the exception of Al content which was reduced by 10 to 15\% in solid builds at optimized conditions. However, Al loss in solid builds approached 25\% for multiple (2 and 3) melt scans, while no changes in Ar gas-bubble density were observed with changes in {$\alpha$}-phase (grain) width which increased from 3 {$\mu$}m for a single melt scan to 4.5 and 6 {$\mu$}m for 2 and 3 melt scans, respectively. Corresponding Rockwell C-scale (HRC) hardness varied from 37, 36, and 35, respectively; with ultimate tensile strengths exceeding 1.2 GPa at elongations of 12\% or higher for this melt scan sequence.}, - keywords = {3D printers,Additive Manufacturing,Aluminum,Cooling,Density of gases,Dislocation densities,Electron beam melting,Hardness,Micro-indentation hardness,Microstructure,Microstructure variations,Microstructures and mechanical properties,Optical metallography,Optimization,Scanning and transmission electron microscopy,Struts,Tensile strength,Titanium alloys,Transmission electron microscopy,Ultimate tensile strength}, - file = {/Users/fabio/Zotero/storage/X69LMF6A/Effect of build parameters and build geometries on residual microstructures and mechanical properties of Ti-6Al-4V components built by e.pdf} -} - -@article{Murr2016, - title = {Frontiers of {{3D Printing}}/{{Additive Manufacturing}}: From {{Human Organs}} to {{Aircraft Fabrication}}}, - author = {Murr, Lawrence E.}, - year = {2016}, - journal = {Journal of Materials Science and Technology}, - volume = {32}, - number = {10}, - pages = {987--995}, - publisher = {{Elsevier Ltd}}, - issn = {10050302}, - doi = {10.1016/j.jmst.2016.08.011}, - abstract = {It has been more than three decades since stereolithography began to emerge in various forms of additive manufacturing and 3D printing. Today these technologies are proliferating worldwide in various forms of advanced manufacturing. The largest segment of the 3D printing market today involves various polymer component fabrications, particularly complex structures not attainable by other manufacturing methods. Conventional printer head systems have also been adapted to selectively print various speciated human cells and special molecules in attempts to construct human organs, beginning with skin and various tissue patches. These efforts are discussed along with metal and alloy fabrication of a variety of implant and bone replacement components by creating powder layers, which are selectively melted into complex forms (such as foams and other open-cellular structures) using laser and electron beams directed by CAD software. Efforts to create a ???living implant??? by bone ingrowth and eventual vascularization within these implants will be discussed briefly. Novel printer heads for direct metal droplet deposition as in other 3D printing systems are briefly described since these concepts will allow for the eventual fabrication of very large and complex products, including automotive and aerospace structures and components.}, - keywords = {3D printing/additive manufacturing,Laser and electron beam melting,Metal droplet printing,Organ and implant vascularization,Organ printing}, - file = {/Users/fabio/Zotero/storage/5MP25MCQ/Frontiers of 3D PrintingAdditive Manufacturing from Human Organs to Aircraft Fabrication.pdf} -} - -@article{Murray2010, - title = {And {{Grow Social Innovation}} the {{Open Book}} of {{Social Innovation}}}, - author = {Murray, Robin and {Caulier-grice}, Julie and Mulgan, Geoff}, - year = {2010}, - journal = {Young}, - volume = {30}, - number = {8}, - pages = {224}, - doi = {10.1371/journal.pcbi.0030166}, - abstract = {This volume part of a series of methods and issues in social innovation describes the hundreds of methods and tools for innovation being used across the world, as a first step to developing a knowledge base. It is the result of a major collaboration between NESTA (the National Endowment for Science, Technology and the Arts) and the Young Foundation two organisations that are committed to the role that social innovation can play in addressing some of the most pressing issues of our time. The Open Book presents a varied, vibrant picture of social innovation in practice and demonstrates the vitality of this rapidly emerging economy. It is fantastically rich, and demonstrates the diversity of initiatives being led by entrepreneurs and campaigners, organisations and movements worldwide.}, - isbn = {9781848750715}, - file = {/Users/fabio/Zotero/storage/ESMFMH7F/m-api-00a1fa22-040e-fcdd-6780-34c36f0097a8.pdf} -} - -@book{Murray2010, - title = {The Open Book of Social Innovation}, - author = {Murray, Robin and {Caulier-Grice}, Julie and Mulgan, Geoff}, - year = {2010}, - pages = {224}, - publisher = {{National endowment for science, technology and the art London}}, - address = {{London}}, - abstract = {The Open Book of Social Innovation \textendash{} part of a series on methods and issues in social innovation \textendash{} is about the many ways in which people are creating new and more effective answers to the biggest challenges of our times: how to cut our carbon footprint; how to keep people healthy; how to end poverty. It describes the methods and tools for innovation being used across the world and across the different sectors \textendash{} the public and private sectors, civil society and the household \textendash{} and in the overlapping fields of the social economy, social entrepreneurship and social enterprise. It draws on inputs from hundreds of organisations around the world to document the many methods currently being used.} -} - -@article{Murray2017, - ids = {murray2017}, - title = {The {{Circular Economy}}: {{An Interdisciplinary Exploration}} of the {{Concept}} and {{Application}} in a {{Global Context}}}, - author = {Murray, Alan and Skene, Keith and Haynes, Kathryn}, - year = {2017}, - month = feb, - journal = {Journal of Business Ethics}, - volume = {140}, - number = {3}, - pages = {369--380}, - publisher = {{Springer Netherlands}}, - issn = {0167-4544}, - doi = {10.1007/s10551-015-2693-2}, - abstract = {There have long been calls from industry for guidance in implementing strategies for sustainable development. The Circular Economy represents the most recent attempt to conceptualize the integration of economic activity and environmental wellbeing in a sustainable way. This set of ideas has been adopted by China as the basis of their economic development (included in both the 11th and the 12th `Five Year Plan'), escalating the concept in minds of western policymakers and NGOs. This paper traces the conceptualisations and origins of the Circular Economy, tracing its meanings, and exploring its antecedents in economics and ecology, and discusses how the Circular Economy has been operationalized in business and policy. The paper finds that while the Circular Economy places emphasis on the redesign of processes and cycling of materials, which may contribute to more sustainable business models, it also encapsulates tensions and limitations. These include an absence of the social dimension inherent in sustainable development that limits its ethical dimensions, and some unintended consequences. This leads us to propose a revised definition of the Circular Economy as ``an economic model wherein planning, resourcing, procurement, production and reprocessing are designed and managed, as both process and output, to maximize ecosystem functioning and human well-being''.}, - isbn = {0167-4544\textbackslash r1573-0697}, - pmid = {327}, - keywords = {Circular Economy,Closed-loop economy,Sustainability,Sustainable development}, - file = {/Users/fabio/Zotero/storage/DX5QATGZ/The Circular Economy- An Interdisciplinary Exploration of the Concept and Application in a Global Context.pdf} -} - -@book{murrayHandbookAcademicWriting2006, - title = {The Handbook of Academic Writing: A Fresh Approach}, - shorttitle = {The Handbook of Academic Writing}, - author = {Murray, Rowena and Moore, Sarah}, - year = {2006}, - publisher = {{Open University Press}}, - address = {{Maidenhead, England New York}}, - isbn = {978-0-335-21933-9 978-0-335-21934-6}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/MDXRSBPJ/Murray y Moore - 2006 - The handbook of academic writing a fresh approach.pdf} -} - -@article{Muschard2015, - title = {Realization of a {{Learning Environment}} to {{Promote Sustainable Value Creation}} in {{Areas}} with {{Insufficient Infrastructure}}}, - author = {Muschard, Bernd and Seliger, G{\"u}nther}, - year = {2015}, - journal = {Procedia CIRP}, - volume = {32}, - number = {Clf}, - pages = {70--75}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2015.04.095}, - keywords = {3d printing,closed loop material cycles,learnstrument,mini-factory,self-sufficient manufacturing system,sustainability}, - file = {/Users/fabio/Zotero/storage/DRPA5P9C/Muschard, Seliger - 2015 - Realization of a Learning Environment to Promote Sustainable Value Creation in Areas with Insufficient Infras.pdf} -} - -@article{Mustajoki2019, - title = {Utilizing Ecosystem Service Classifications in Multi-Criteria Decision Analysis \textendash{} {{Experiences}} of Peat Extraction Case in {{Finland}}}, - author = {Mustajoki, Jyri and Saarikoski, Heli and Belton, Valerie and Hjerppe, Turo and Marttunen, Mika}, - year = {2020}, - month = feb, - journal = {Ecosystem Services}, - volume = {41}, - pages = {101049}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2019.101049}, - urldate = {2021-05-04}, - abstract = {The Ecosystem Service concept is a widely used framework to examine the links between the functioning of ecosystems and human well-being. There is a broad range of ecosystem services, which are often classified hierarchically as provisioning, regulating and cultural services. Multi-Criteria Decision Analysis (MCDA), an approach for analyzing complex problems that involve trade-offs between multiple objectives, has increasingly been applied in the ecosystem service context. In MCDA, a problem is typically represented hierarchically as a value tree, which resembles the hierarchical structure of the ecosystem service classifications. However, in practice, there are several potential pitfalls that could distort the analysis, if some commonly used ecosystems service classification was directly used as the basis of an MCDA value tree. In this paper, we discuss these potential pitfalls and how to avoid them. Our discussion is illustrated with experience from a case study focusing on the ecosystem services provided by the peatlands in Finland.}, - keywords = {Analysis,Criteria,Decision,Ecosystem service classification,Multi-,Peat extraction}, - file = {/Users/fabio/Zotero/storage/3I4VIWT3/full-text.pdf} -} - -@article{muthukrishnaPsychologyHistoricalScience2021, - title = {Psychology as a {{Historical Science}}}, - author = {Muthukrishna, Michael and Henrich, Joseph and Slingerland, Edward}, - year = {2021}, - month = jan, - journal = {Annual Review of Psychology}, - volume = {72}, - number = {1}, - pages = {717--749}, - publisher = {{Annual Reviews}}, - issn = {0066-4308}, - doi = {10.1146/annurev-psych-082820-111436}, - urldate = {2021-01-13}, - abstract = {Psychology has traditionally seen itself as the science of universal human cognition, but it has only recently begun seriously grappling with cross-cultural variation. Here we argue that the roots of cross-cultural variation often lie in the past. Therefore, to understand not only how but also why psychology varies, we need to grapple with cross-temporal variation. The traces of past human cognition accessible through historical texts and artifacts can serve as a valuable, and almost completely unutilized, source of psychological data. These data from dead minds open up an untapped and highly diverse subject pool. We review examples of research that may be classified as historical psychology, introduce sources of historical data and methods for analyzing them, explain the critical role of theory, and discuss how psychologists can add historical depth and nuance to their work. Psychology needs to become a historical science if it wants to be a genuinely universal science of human cognition and behavior.}, - keywords = {cultural evolution,cultural psychology,culture,historical databases,large-scale textual analysis,science/humanities integration} -} - -@article{Mwanza2019, - title = {Value {{Addition}} to {{Plastic Solid Wastes}}: {{Informal Waste Collectors}}' {{Perspective}}}, - author = {Mwanza, Bupe G. and Mbohwa, Charles and Telukdarie, Arnesh and Medoh, Chuks}, - year = {2019}, - journal = {Procedia Manufacturing}, - volume = {33}, - pages = {391--397}, - publisher = {{Elsevier B.V.}}, - issn = {23519789}, - doi = {10.1016/j.promfg.2019.04.048}, - urldate = {2020-04-08}, - abstract = {Plastic Solid Wastes (PSWs) recycling is an important component to sustainable manufacturing. In developing economies, the majority of the recovery and recycling is conducted by the Informal Waste Collectors (IWCs). An assessment is conducted to understand the ways in which the IWCs add value to the recovered PSWs prior trading to the plastic converting companies. A questionnaire survey is conducted with the IWCs and a total of 53 questionnaires are analysed. A number of value addition aspects are identified including; sorting, cleaning, classifying, washing and drying and grouping into commercial quantities. Buyers along the supply-chain are considered as an aspect of value addition. The identified value addition aspects are important and relevant to upcoming and existing plastic convertors in terms of driving sustainable manufacturing and value creation for a circular economy.}, - keywords = {Informal Waste Sector,Plastic Solid Wastes,Value Creation}, - file = {/Users/fabio/Zotero/storage/P2CS8QLE/full-text.pdf} -} - -@article{nabiReviewMicroplasticsSeparation2022, - title = {A Review on Microplastics Separation Techniques from Environmental Media}, - author = {Nabi, Iqra and Bacha, Aziz-Ur-Rahim and Zhang, Liwu}, - year = {2022}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {337}, - pages = {130458}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130458}, - urldate = {2022-01-25} -} - -@article{Nadeem2019, - title = {Consumers' Value Co-Creation in Sharing Economy: {{The}} Role of Social Support, Consumers' Ethical Perceptions and Relationship Quality}, - author = {Nadeem, Waqar and Juntunen, Mari and Shirazi, Farid and Hajli, Nick}, - year = {2019}, - month = nov, - journal = {Technological Forecasting and Social Change}, - pages = {119786}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119786} -} - -@article{Nadgorny2016a, - title = {Three-{{Dimensional Printing}} of {{pH-Responsive}} and {{Functional Polymers}} on an {{Affordable Desktop Printer}}}, - author = {Nadgorny, Milena and Xiao, Zeyun and Chen, Chao and Connal, Luke A.}, - year = {2016}, - journal = {ACS Applied Materials and Interfaces}, - volume = {8}, - number = {42}, - pages = {28946--28954}, - issn = {19448252}, - doi = {10.1021/acsami.6b07388}, - abstract = {In this work we describe the synthesis, thermal and rheological characterization, hot-melt extrusion, and three-dimensional printing (3DP) of poly(2-vinylpyridine) (P2VP). We investigate the effect of thermal processing conditions on physical properties of produced filaments in order to achieve high quality, 3D-printable filaments for material extrusion 3DP (ME3DP). Mechanical properties and processing performances of P2VP were enhanced by addition of 12 wt \% acrylonitrile\textendash butadiene\textendash styrene (ABS), which reinforced P2VP fibers. We 3D-print P2VP filaments using an affordable 3D printer. The pyridine moieties are cross-linked and quaternized postprinting to form 3D-printed pH-responsive hydrogels. The printed objects exhibited dynamic and reversible pH-dependent swelling. These hydrogels act as flow-regulating valves, controlling the flow rate with pH. Additionally, a macroporous P2VP membrane was 3D-printed and the coordinating ability of the pyridyl groups was employed to immobilize silver precursors on it...}, - pmid = {27696806}, - keywords = {3D-printing,catalysis,filaments,functional materials,hot-melt extrusion,pH-responsive materials}, - file = {/Users/fabio/Zotero/storage/HS2FAYTM/three-dimensional printing of ph-responsive and functional polymers on an affordable desktop printer.pdf} -} - -@article{Naghshineh2020, - title = {Social Impacts of Additive Manufacturing: {{A}} Stakeholder-Driven Framework}, - author = {Naghshineh, Bardia and Ribeiro, Andr{\'e} and Jacinto, Celeste and Carvalho, Helena}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - pages = {120368}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120368}, - urldate = {2020-12-14}, - abstract = {Additive manufacturing (AM), also known as 3D Printing, is believed to be a disruptive technology, and therefore the assessment of its ensuing sustainability impacts is necessary. The insufficient evidence in extant literature addressing the social impacts of AM suggests that the social sustainability aspect of this technology has received scant attention. The current study addresses this knowledge gap through a critical literature review that leads to the identification of 42 AM social impacts and their association with relevant stakeholders, shaping a social life cycle typology that indicates to what extent each stakeholder is affected by AM. Additionally, a set of illustrative indicators for measuring some of the identified AM social impacts are proposed. Finally, the findings are summarized in the form of a framework that can help future research to holistically investigate the social sustainability implications of AM technology.}, - keywords = {SDRAM}, - file = {/Users/fabio/Zotero/storage/J32DBCLY/Naghshineh et al. - 2020 - Social impacts of additive manufacturing A stakeholder-driven framework.pdf} -} - -@misc{Naitove;MatthewH.2012, - title = {Conference {{Report}}: {{Bioplastics Are Breaking Out}} of {{Their}} '{{Green}}' {{Niche}} : {{Plastics Technology}}}, - author = {{Naitove; Matthew H.}}, - year = {2012}, - journal = {PLastic Technology}, - urldate = {2014-07-23}, - howpublished = {http://www.ptonline.com/articles/conrerence-report-bioplastics-are-breaking-out-of-their-green-niche} -} - -@article{Nakagawa2019, - title = {Intergenerational Retrospective Viewpoint Promotes Financially Sustainable Attitude}, - author = {Nakagawa, Yoshinori and Arai, Real and Kotani, Koji and Nagano, Masanobu and Saijo, Tatsuyoshi}, - year = {2019}, - month = dec, - journal = {Futures}, - volume = {114}, - pages = {102454}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.102454} -} - -@article{Nam2019, - title = {Development of a Health Monitoring and Diagnosis Framework for Fused Deposition Modeling Process Based on a Machine Learning Algorithm}, - author = {Nam, Jungsoo and Jo, Nanhyeon and Kim, Jung Sub and Lee, Sang Won}, - year = {2020}, - month = jun, - journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, - volume = {234}, - number = {1-2}, - pages = {324--332}, - publisher = {{SAGE PublicationsSage UK: London, England}}, - issn = {20412975}, - doi = {10.1177/0954405419855224}, - urldate = {2021-08-31}, - abstract = {In this article, a data-driven approach is applied to develop a health monitoring and diagnosis framework for a fused deposition modeling process based on a machine learning algorithm. For the data-driven approach, three accelerometers, an acoustic emission sensor, and three thermocouples are installed, and associated data are collected from those sensors. The collected data are processed to obtain root mean square values, and they are used for constructing health monitoring and diagnosis models for the fused deposition modeling process based on a support vector machine algorithm, which is one of machine learning algorithms. Among various root mean square values, those of acceleration data from the frame were most effective for diagnosing health states of the fused deposition modeling process with the non-linear support vector machine\textendash based model.}, - keywords = {Data-driven approach,fused deposition modeling,health monitoring and diagnosis,hold-out cross validation,sensor signals,support vector machine}, - file = {/Users/fabio/Zotero/storage/PVHQDR6L/full-text.pdf} -} - -@book{Name2014, - title = {No {{Title No Title}}}, - author = {Name, Last and Name, First and Training, Online and Training, Practical and Darin, C and Training, Rank Online and Kimberly, M and Deepa, G and Board, Ethics and Principal, Enter and Primary, Investigator and Systems, Food and Study, Emu Behaviour and {Co-investigator}, New}, - year = {2014}, - journal = {Igarss 2014}, - number = {1}, - doi = {10.1007/s13398-014-0173-7.2}, - abstract = {Mycotoxins are small (MW approximately 700), toxic chemical products formed as secondary metabolites by a few fungal species that readily colonise crops and contaminate them with toxins in the field or after harvest. Ochratoxins and Aflatoxins are mycotoxins of major significance and hence there has been significant research on broad range of analytical and detection techniques that could be useful and practical. Due to the variety of structures of these toxins, it is impossible to use one standard technique for analysis and/or detection. Practical requirements for high-sensitivity analysis and the need for a specialist laboratory setting create challenges for routine analysis. Several existing analytical techniques, which offer flexible and broad-based methods of analysis and in some cases detection, have been discussed in this manuscript. There are a number of methods used, of which many are lab-based, but to our knowledge there seems to be no single technique that stands out above the rest, although analytical liquid chromatography, commonly linked with mass spectroscopy is likely to be popular. This review manuscript discusses (a) sample pre-treatment methods such as liquid-liquid extraction (LLE), supercritical fluid extraction (SFE), solid phase extraction (SPE), (b) separation methods such as (TLC), high performance liquid chromatography (HPLC), gas chromatography (GC), and capillary electrophoresis (CE) and (c) others such as ELISA. Further currents trends, advantages and disadvantages and future prospects of these methods have been discussed.}, - isbn = {978-0-87421-656-1}, - keywords = {high resolution images,research,risks management,sustainable reconstruction}, - file = {/Users/fabio/Zotero/storage/C7S5MH2N/No Title No Title.pdf} -} - -@article{Nascimento2019, - title = {Exploring {{Industry}} 4.0 Technologies to Enable Circular Economy Practices in a Manufacturing Context}, - author = {Nascimento, Daniel Luiz Mattos and Alencastro, Viviam and Quelhas, Osvaldo Luiz Gon{\c c}alves and Caiado, Rodrigo Goyannes Gusm{\~a}o and {Garza-Reyes}, Jose Arturo and {Rocha-Lona}, Luis and Tortorella, Guilherme}, - year = {2019}, - month = apr, - journal = {Journal of Manufacturing Technology Management}, - volume = {30}, - number = {3}, - pages = {607--627}, - issn = {1741-038X}, - doi = {10.1108/JMTM-03-2018-0071}, - abstract = {Purpose The purpose of this paper is to explore how rising technologies from Industry 4.0 can be integrated with circular economy (CE) practices to establish a business model that reuses and recycles wasted material such as scrap metal or e-waste. Design/methodology/approach The qualitative research method was deployed in three stages. Stage 1 was a literature review of concepts, successful factors and barriers related to the transition towards a CE along with sustainable supply chain management, smart production systems and additive manufacturing (AM). Stage 2 comprised a conceptual framework to integrate and evaluate the synergistic potential among these concepts. Finally, stage 3 validated the proposed model by collecting rich qualitative data based on semi-structured interviews with managers, researchers and professors of operations management to gather insightful and relevant information. Findings The outcome of the study is the recommendation of a circular model to reuse scrap electronic devices, integrating web technologies, reverse logistics and AM to support CE practices. Results suggest a positive influence from improving business sustainability by reinserting waste into the supply chain to manufacture products on demand. Social implications The purpose of this study was to explore how Industry 4.0 technologies are integrated with CE practices. This allows for the proposal of a circular business model for recycling waste and delivering new products, significantly reducing resource consumption and optimising natural resources. In a first stage, the circular business model can be used to recycle electronic scrap, with the proposed integration of web technologies, reverse logistics and AM as a technological platform to support the model. These have several environmental, sociotechnical and economic implications for society. Originality/value The sociotechnical aspects are directly impacted by the circular smart production system (CSPS) management model, since it creates a new culture of reuse and recycling techniques for urban waste using 3D printing technologies, as well as Industry 4.0 concepts to increase production on demand and automate manufacturing processes. The tendency of the CSPS model is to contribute to deployment CE in the manufacture of new products or parts with AM approaches, generating a new path of supply and demand for society.}, - arxiv = {http://dx.doi.org/10.1108/BIJ-10-2012-0068}, - isbn = {0520130251}, - pmid = {42012058}, - keywords = {3D printing,Additive manufacturing,Advanced manufacturing technology,Employee attitudes,Employee development,Gender,Green operations,Hum,Industry 4.0,Sustainable production}, - file = {/Users/fabio/Zotero/storage/3UT99QWG/Exploring Industry 4.0 technologies to enable circular economy practices in a manufacturing context(2).pdf;/Users/fabio/Zotero/storage/PM2U7LF6/Exploring Industry 4.0 technologies to enable circular economy practices in a manufacturing context.pdf} -} - -@article{naserAutomatedLifeCycle2023, - title = {Toward Automated Life Cycle Assessment for Additive Manufacturing: {{A}} Systematic Review of Influential Parameters and Framework Design}, - shorttitle = {Toward Automated Life Cycle Assessment for Additive Manufacturing}, - author = {Naser, Ahmed Z. and Defersha, Fantahun and Pei, Eujin and Zhao, Yaoyao Fiona and Yang, Sheng}, - year = {2023}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {41}, - pages = {253--274}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.08.009}, - urldate = {2023-08-31}, - abstract = {Additive manufacturing (AM), a disruptive technology of building parts layer-by-layer directly from 3D models, has been considered a tempting cleaner production process compared to other conventional production routes. This is because AM has demonstrated impressive green characteristics which contributed to significantly reduced material and energy consumptions, a shorter supply chain, and diversion of the waste stream by reparation, etc. The majority of the current quantitative studies on the environmental assessment of AM are based on utilizing the knowledge-intensive Life Cycle Assessment (LCA) methodology. Further, current studies on assessing the environmental performance of AM are based on a limited selection of design- or process-related parameters. These knowledge barriers may cause delays and challenges in the selection of the optimal design and process parameters for additively manufactured parts. Such challenges are particularly prevalent during the product design and planning stages due to the iterative design-evaluation process. Therefore, there is a need for an automated LCA tool to support AM toward elevated sustainability. As such, this paper provides three main contributions to the research community. Firstly, this is the first study to identify a comprehensive set of influential AM design and process parameters that pose an impact on the environmental performance of AM. Secondly, this review also summarizes the impacts of each of these parameters on the environmental sustainability of AM. Lastly, to the best of the authors' knowledge, no work in the literature has been reported on automating LCA for AM. Thus, this paper promotes research toward a more environmentally benign and innovative AM technology by proposing a new framework to automate the environmental assessment of the process. The proposed framework is anticipated to take advantage of the fruitful integration between Machine Learning (ML) and the product process co-design concept to mitigate the challenges and limitations associated with the current LCA-based assessment tools.}, - keywords = {Additive manufacturing,Data-driven predictive model,Design and process parameters,Design for additive manufacturing,Life cycle assessment,Machine learning,Product-process co-design}, - file = {/Users/fabio/Zotero/storage/QJ6KNHG3/S2352550923001963.html} -} - -@article{nateraTransformationalComplexitySystemic2021, - title = {Transformational Complexity, Systemic Complexity and Economic Development}, - author = {Natera, Jose Miguel and Castellacci, Fulvio}, - year = {2021}, - month = sep, - journal = {Research Policy}, - volume = {50}, - number = {7}, - pages = {104275}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104275}, - urldate = {2021-06-10} -} - -@article{nathaphanEffectsProcessParameters2021, - title = {Effects of Process Parameters on Compressive Property of {{FDM}} with {{ABS}}}, - author = {Nathaphan, Supphachai and Trutassanawin, Worrasid}, - year = {2021}, - month = may, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-12-2019-0309}, - urldate = {2021-06-15}, - keywords = {Acrylonitrile Butadiene Styrene (ABS),Compressive yield stress,Dimensional accuracy,Fused deposition modeling (FDM),Process parameters} -} - -@article{nathOptimizationFusedFilament2020, - title = {Optimization of Fused Filament Fabrication Process Parameters under Uncertainty to Maximize Part Geometry Accuracy}, - author = {Nath, Paromita and Olson, Joseph D. and Mahadevan, Sankaran and Lee, Yung Tsun Tina}, - year = {2020}, - month = oct, - journal = {Additive Manufacturing}, - volume = {35}, - pages = {101331}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101331}, - urldate = {2020-07-14}, - abstract = {This work presents a novel process design optimization framework for additive manufacturing (AM) by integrating physics-informed computational simulation models with experimental observations. The proposed framework is implemented to optimize the process parameters such as extrusion temperature, extrusion velocity, and layer thickness in the fused filament fabrication (FFF) AM process, in order to reduce the variability in the geometry of the manufactured part. A coupled thermo-mechanical model is first developed to simulate the FFF process. The temperature history obtained from the heat transfer analysis is then used as input for the mechanical deformation analysis to predict the dimensional inaccuracy of the additively manufactured part. The simulation model is then corrected based on experimental observations through Bayesian calibration of the model discrepancy to make it more accurately represent the actual manufacturing process. Based on the corrected prediction model, a robustness-based design optimization problem is formulated to optimize the process parameters, while accounting for multiple sources of uncertainty in the manufacturing process, process models, and measurements. Physical experiments are conducted to verify the effectiveness of the proposed optimization framework.}, - keywords = {Additive manufacturing,Experimental validation,Fused filament fabrication,Material extrusion,Process design}, - file = {/Users/fabio/Zotero/storage/G9FV37GR/full-text.pdf} -} - -@misc{NatureServicesSocietal, - title = {Nature's {{Services}}: {{Societal Dependence On Natural Ecosystems}} - {{Gretchen Daily}} - {{Google Books}}}, - urldate = {2021-04-23}, - howpublished = {https://books.google.fr/books?hl=en\&lr=\&id=QYJSziDfTjEC\&oi=fnd\&pg=PA11\&dq=Ecosystem+services:+A+fragmentary+history.\&ots=YhuRKSGUxl\&sig=JUVxWiY1xp\_0ISLcAw83TrKXn2s\#v=onepage\&q=Ecosystem\%20services\%3A\%20A\%20fragmentary\%20history.\&f=false} -} - -@article{naughtonWillCOVID19Pandemic2020, - title = {Will the {{COVID-19}} Pandemic Change Waste Generation and Composition?: {{The}} Need for More Real-Time Waste Management Data and Systems Thinking}, - author = {Naughton, C.C.}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105050}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105050}, - urldate = {2020-07-21}, - file = {/Users/fabio/Zotero/storage/8CGMWBUK/full-text.pdf} -} - -@article{naustdalslidCircularEconomyChina2014, - title = {Circular Economy in {{China}} - {{The}} Environmental Dimension of the Harmonious Society}, - author = {Naustdalslid, Jon}, - year = {2014}, - month = jul, - journal = {International Journal of Sustainable Development and World Ecology}, - volume = {21}, - number = {4}, - pages = {303--313}, - publisher = {{Taylor and Francis Ltd.}}, - issn = {17452627}, - doi = {10.1080/13504509.2014.914599}, - urldate = {2022-03-13}, - abstract = {This paper discusses Chinas policy of developing an ecologically based circular economy (CE). In this paper, CE is understood as the environmental dimension of the wider vision of China as a harmonious society, formulated by the 16th Party Congress in 2002 in response to the social and environmental problems following in the wake of the unfettered economic growth policy of China after Mao Zedongs death in 1976. The 18th Party Congress of CCP in 2012 further strengthened the official resolve to develop China as an ecological civilization characterized by harmony between man and nature under the epitome Beautiful China. The paper discusses CE in this wider context. It is based on a review of literature on CE available in English. The aim is to present a more comprehensive understanding and critique of the Chinese version of CE as part of a wider policy for socioeconomic transformation and development of an ecologically based society, than has so far been done. The paper concludes by discussing bottlenecks and challenges confronting the implementation of CE in this wider socioeconomic context. The main problems are claimed to be the challenge of implementing CE as a top-down social engineering process and the lack of civil society involvement. \textcopyright{} 2014 Taylor \& Francis.}, - keywords = {China,circular economy,development,environment,harmonious society} -} - -@article{navareCircularEconomyMonitoring2021, - title = {Circular Economy Monitoring \textendash{} {{How}} to Make It Apt for Biological Cycles?}, - author = {Navare, Kranti and Muys, Bart and Vrancken, Karl C. and Van Acker, Karel}, - year = {2021}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {170}, - pages = {105563}, - publisher = {{Elsevier BV}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105563}, - urldate = {2021-04-29}, - abstract = {Circular economy (CE) principles distinguish between technical and biological cycles. Technical cycles involve the management of stocks of non-renewable abiotic resources that cannot be appropriately returned to the biosphere, whereas, biological cycles involve the flows of renewable biotic resources that can safely cycle in and out of the biosphere. Despite this distinction, existing CE monitors are typically developed for technical cycles, and focus mainly on the extent to which resources are looped back in the technosphere. These monitors seem less apt to assess the circularity of biological cycles. This study aims to identify this gap by critically reviewing the CE monitoring criteria and CE assessment tools, and evaluate if they include the four key characteristics of biological cycles. Firstly, biotic resources, although renewable, require to be harvested sustainably. Secondly, while abiotic resources can be restored and recycled to their original quality, biotic resources degrade in quality with every subsequent use and are, hence, cascaded in use. Thirdly, biotic resources should safely return as nutrients to the biosphere to support the regeneration of ecosystems. Fourthly, biological cycles have environmental impacts due to resource extraction, resulting from land-use and resource-depletion and biogenic carbon flows. The CE monitoring criteria lack in thoroughly assessing these characteristics. With the growing demand for biotic resources, the gap in the assessment could exacerbate the overexploitation of natural resources and cause the degradation of ecosystems. The study discusses measures to bridge this gap and suggests ways to design a CE assessment framework that is also apt for biological cycles.} -} - -@article{navarreRecycledPlasticPackaging2022, - title = {Recycled Plastic Packaging from the {{Dutch}} Food Sector Pollutes {{Asian}} Oceans}, - author = {Navarre, N. and Mogoll{\'o}n, J. M. and Tukker, A. and Barbarossa, V.}, - year = {2022}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {185}, - pages = {106508}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106508}, - urldate = {2022-08-11}, - abstract = {Plastic food packaging is a cost-effective tool to minimize food waste. However, plastic food packaging rapidly generates waste and if mismanaged can leak to the environment adversely affecting ecosystems. We quantified the plastic waste leaked to the marine environment due to food consumption in the Netherlands. Combining food consumption patterns, food waste estimates, and plastic packaging data, we estimated the plastic packaging intensity of the Dutch diet. We then mapped the fate of the plastic food packaging waste generated using Dutch plastic waste management patterns. We estimate that a total of 296~kt/yr of plastic food packaging is required in the Netherlands. We model that 6.5~kt/yr is leaked to the marine environment, with 75\% of this leakage resulting from the exportation of plastic waste to nations in Asia, 3\% from all other nations, and 22\% due to littering. We conclude that despite being a high-income nation with a post-consumer plastic packaging waste network reporting a 78\% recycle rate, Dutch plastic food packaging waste is leaked to the marine environment at a globally average rate, raising questions about plastic recycle rate metrics and Dutch/EU plastic waste export policies.}, - langid = {english}, - keywords = {Food consumption,Littering,Marine debris,Plastic food packaging,Plastic waste management,Plastic waste trade}, - file = {/Users/fabio/Zotero/storage/7JRJIWY6/Navarre et al_2022_Recycled plastic packaging from the Dutch food sector pollutes Asian oceans.pdf;/Users/fabio/Zotero/storage/59R7TE9D/S0921344922003512.html} -} - -@article{Navarrete2017, - title = {Thermal and Mechanical Behavior of Biocomposites Using Additive Manufacturing}, - author = {Montalvo Navarrete, Jorge I. and {Hidalgo-Salazar}, Miguel A. and Escobar Nunez, Emerson and Rojas Arciniegas, Alvaro J.}, - year = {2017}, - month = jun, - journal = {International Journal on Interactive Design and Manufacturing (IJIDeM)}, - number = {May}, - publisher = {{Springer Paris}}, - issn = {1955-2513}, - doi = {10.1007/s12008-017-0411-2}, - keywords = {Additive manufacturing,Biocomposites,PLA,PP,Wood f}, - file = {/Users/fabio/Zotero/storage/8ATMNU9Y/Thermal and mechanical behavior of biocomposites using additive manufacturing.pdf} -} - -@article{nazliRepairMotivationBarriers2020, - title = {Repair Motivation and Barriers Model: {{Investigating}} User Perspectives Related to Product Repair towards a Circular Economy}, - author = {Nazl{\i}, Terzio{\u g}lu}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125644}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125644}, - urldate = {2021-01-01}, - file = {/Users/fabio/Zotero/storage/WGSEIJ4H/full-text.pdf} -} - -@article{Ncube2021, - title = {An {{Overview}} of {{Plastic Waste Generation}} and {{Management}} in {{Food Packaging Industries}}}, - author = {Ncube, Lindani Koketso and Ude, Albert Uchenna and Ogunmuyiwa, Enoch Nifise and Zulkifli, Rozli and Beas, Isaac Nongwe}, - year = {2021}, - month = feb, - journal = {Recycling}, - volume = {6}, - number = {1}, - pages = {12}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2313-4321}, - doi = {10.3390/recycling6010012}, - urldate = {2021-02-14}, - abstract = {Over the years, the world was not paying strict attention to the impact of rapid growth in plastic use. This has led to unprecedented amounts of mixed types of plastic waste entering the environment unmanaged. Packaging plastics account for half of the global total plastic waste. This paper seeks to give an overview of the use, disposal, and regulation of food packaging plastics. Demand for food packaging is on the rise as a result of increasing global demand for food due to population growth. Most of the food packaging are used on-the-go and are single use plastics that are disposed of within a short space of time. The bulk of this plastic waste has found its way into the environment contaminating land, water and the food chain. The food industry is encouraged to reduce, reuse and recycle packaging materials. A wholistic approach to waste management will need to involve all stakeholders working to achieve a circular economy. A robust approach to prevent pollution today rather than handling the waste in the future should be adopted especially in Africa where there is high population growth.}, - keywords = {food packaging,plastic disposal,plastic waste management,single-use plastics}, - file = {/Users/fabio/Zotero/storage/H86Z4HWG/full-text.pdf} -} - -@article{negashEngagementFactorsHousehold2021, - title = {Engagement Factors for Household Waste Sorting in {{Ecuador}}: {{Improving}} Perceived Convenience and Environmental Attitudes Enhances Waste Sorting Capacity}, - author = {Negash, Yeneneh Tamirat and Sarmiento, Liria Salome Calahorrano and Tseng, Ming-Lang and Lim, Ming K. and Ali, Mohd Helmi}, - year = {2021}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {175}, - pages = {105893}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105893}, - urldate = {2021-09-15} -} - -@article{negrutiuCompassResourceJustice2022, - title = {A Compass for Resource Justice and Planetary Health: Food Systems and Global Pollution}, - author = {NEGRUTIU, Ioan}, - year = {2022}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {181}, - pages = {106229}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106229}, - urldate = {2022-03-08} -} - -@article{nelmsRoleCitizenScience2022, - title = {The Role of Citizen Science in Addressing Plastic Pollution: {{Challenges}} and Opportunities}, - author = {Nelms, Sarah E. and Easman, Emily and Anderson, Nichola and Berg, Madeleine and Coates, Sue and Crosby, Abigail and {Eisfeld-Pierantonio}, Sonja and Eyles, Lauran and Flux, Tony and Gilford, Emily and Giner, Claire and Hamlet, Jasper and Hembrow, Neil and Hickie, Jessica and Hopkinson, Peter and Jarvis, Dan and Kearsley, Jonathan and Millard, Justine and Nunn, Fred and Pollitt, Emily and Sainsbury, Avril and Sayer, Sue and Sinclair, Rory and Slack, Amy and Smith, Pat and Thomas, Rebecca and Tyler, Jen and Walker, Richard and Wallerstein, Claire and Ward, Mark and Godley, Brendan J.}, - year = {2022}, - month = feb, - journal = {Environmental Science \& Policy}, - volume = {128}, - pages = {14--23}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.11.002}, - urldate = {2021-12-01} -} - -@article{nelsonDifferentialProgressibilityHuman2023, - title = {Differential ``Progressibility'' in Human Know-How: {{A}} Conceptual Overview}, - shorttitle = {Differential ``Progressibility'' in Human Know-How}, - author = {Nelson, John P.}, - year = {2023}, - month = mar, - journal = {Research Policy}, - volume = {52}, - number = {2}, - pages = {104663}, - issn = {0048-7333}, - doi = {10.1016/j.respol.2022.104663}, - urldate = {2022-12-12}, - abstract = {Over the last few hundred years, best practice in some fields of human action\textemdash e.g. the treatment of heart disease, the transportation of persons, goods, and messages, and destruction of landscapes, structures, and lives\textemdash has become dramatically more effective. At the same time, best practice in other fields, e.g. the amelioration of poverty or the teaching of reading, writing, or math, has improved more slowly, if at all. As Richard Nelson and colleagues have argued, it seems that practice and technology (``know-how'') can only improve rapidly under rather special conditions: that, at any given point in time, some fields are more ``progressible'' than others. Drawing on Nelson's work and studies in the history, sociology, and economics of technology and innovation, I offer a conceptual framework articulating several characteristics of practice in a field that may facilitate rapid progress. These characteristics, while not fixed, tend to remain fairly stable for long periods of time. I argue that know-how can improve more quickly 1) when ``vicarious trial'' of variations in practice is feasible and useful; 2) when practice is formal and standardized; 3) when practice is in significant part performed by artifacts rather than by humans; 4) when outcomes of variations in practice may be rapidly evaluated; 5) when valued performance dimensions are consistently agreed upon; 6) when contexts and objects of practice may be treated as, or have been made, consistent for the purposes of intervention; and 7) when labor is finely divided. Thus, analysis of these features may inform judgments about the plausibility of rapid advance within a field, absent disruptive change in methods or problem formulation. The argument may also shed light on which varieties of innovative effort may and may not foreseeably contribute to improving practice in a given field.}, - langid = {english}, - keywords = {Evolution,Experimentation,Innovation,Know-how,Knowledge,Technology}, - file = {/Users/fabio/Zotero/storage/3XNW7EQQ/Nelson_2023_Differential “progressibility” in human know-how.pdf;/Users/fabio/Zotero/storage/JC5HPGXU/S0048733322001846.html} -} - -@article{neoLifeCycleAssessment2021, - title = {Life Cycle Assessment of Plastic Waste End-of-Life for {{India}} and {{Indonesia}}}, - author = {Neo, Edward Ren Kai and Soo, Gibson Chin Yuan and Tan, Daren Zong Loong and Cady, Karina and Tong, Kai Ting and Low, Jonathan Sze Choong}, - year = {2021}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {174}, - pages = {105774}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105774}, - urldate = {2021-07-05} -} - -@article{Ness2008, - title = {Sustainable Urban Infrastructure in {{China}}: {{Towards}} a {{Factor}} 10 Improvement in Resource Productivity through Integrated Infrastructure Systems}, - author = {Ness, David}, - year = {2008}, - journal = {International Journal of Sustainable Development \& World Ecology}, - volume = {15}, - number = {4}, - pages = {345--349}, - doi = {10.3843/SusDev.15.4:2a}, - abstract = {Surface ozone (O3) pollution, a critical environmental challenge facing government agencies at all levels, is becoming more and more serious in China, especially in rapidly developing urban areas like Beijing. However, in China, few studies have evaluated the contribution of various pollution sources to surface O3, e.g. motor vehicles. In this paper, we combined a non-linear model with an analysis of motor vehicle emissions of NOx and VOCs in an integrated approach to estimate the contribution of motor vehicle emissions to surface O3. The model showed that, in urban areas of Beijing in 2000, the contribution of motor vehicle emissions to surface O3 was 45.9\%, and that elimination of 20.0\% of motor vehicle emissions will lead to a 7.4\% reduction in surface O3, while elimination of 20.0\% of NOx or VOC emissions from motor vehicles will result in a 5.0\% and 2.5\% decline, respectively, in surface O3. In addition, elimination of 10,000 t of NOx from motor vehicles results in the same reduction in surface O3 as elimination of 25,631 t of VOCs. Thus, controlling NOx emissions from motor vehicles is an effective way to control surface O3 pollution in the study area.}, - file = {/Users/fabio/Zotero/storage/4VN3N2PE/Sustainable urban infrastructure in China Towards a Factor 10 improvement in resource productivity through integrated infrastructure systems.pdf} -} - -@article{Nesterova2020, - title = {Degrowth Business Framework: {{Implications}} for Sustainable Development}, - author = {Nesterova, Iana}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {262}, - pages = {121382}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121382}, - urldate = {2020-04-07}, - abstract = {Recent years have seen a revival in growth scepticism, yet degrowth in relation to the macroeconomic level has received almost exclusive attention. This resulted in a lack of literature on how post-growth and specifically degrowth visions of economy could be implemented, including from the perspective of firms and other organisations. This paper focuses on degrowth literature and fields of knowledge which share a similar or sympathetic perspective regarding the undesirability of economic growth and desirability of living within planetary boundaries while pursuing wellbeing. It then applies degrowth vision to firms and identifies potential elements of a business for a degrowth economy, here referred to as a degrowth business. These elements comprise a degrowth business framework. The framework is centred around the following groups: (1) environment, (2) people and non-humans, and (3) deviation from profit maximisation imperative. It aims to contribute to an emerging discussion on what firms should be like for a degrowth economy and society to be possible.}, - keywords = {Business models for sustainability,Degrowth,Post-growth,Production} -} - -@article{nesterovaAddressingObscurityChange2021, - title = {Addressing the Obscurity of Change in Values in Degrowth Business}, - author = {Nesterova, Iana}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {315}, - pages = {128152}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128152}, - urldate = {2021-07-05} -} - -@article{nesterovaDegrowthCircularEconomy2023, - title = {Degrowth and the Circular Economy: {{Reflecting}} on the Depth of Business Circularity}, - shorttitle = {Degrowth and the Circular Economy}, - author = {Nesterova, Iana and {Buch-Hansen}, Hubert}, - year = {2023}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {414}, - pages = {137639}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137639}, - urldate = {2023-07-06}, - abstract = {Discussions about the circular economy have taken place in parallel with, but largely independently of, discussions about degrowth. The present paper brings into dialogue the two fields by contemplating what circularity in business could entail in the context of transformations towards degrowth societies. To this end, the paper relates to a recent, holistic reconceptualisation which views degrowth transformations in terms of both less and more on four planes of social being: material transactions with nature, social interactions between people, social structures and people's inner being. These planes signify depth of social being. The paper looks at business through the lens of this reconceptualisation before zooming in on circularity as an important manifestation of a sustainability practice in business. We argue that, in the context of degrowth, implementation of circularity as a principle and a practice should be deep. Relating circularity to each plane of social being, we focus particularly on the plane of people's inner being, the reason being that our mode of relating with the world would need to be significantly different to what it currently is, if deep circularity practices are to become more widespread.}, - langid = {english}, - keywords = {Circular economy,Circularity,Critical realism,Deep transformations,Degrowth}, - file = {/Users/fabio/Zotero/storage/SJIISJD7/S0959652623017973.html} -} - -@article{nesterovaSmallFirmsAgents2021, - title = {Small Firms as Agents of Sustainable Change}, - author = {Nesterova, I.}, - year = {2021}, - month = jan, - journal = {Futures}, - volume = {127}, - pages = {102705}, - publisher = {{Elsevier BV}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102705}, - urldate = {2021-02-14} -} - -@article{Netter2019, - title = {Sharing Economy Revisited: {{Towards}} a New Framework for Understanding Sharing Models}, - author = {Netter, Sarah and Pedersen, Esben Rahbek Gjerdrum and {L{\"u}deke-Freund}, Florian}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {221}, - pages = {224--233}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.225} -} - -@article{Network2020, - title = {M\'ethodologie de Recherche : {{Traitement}} Des Informations :}, - author = {Network, Stakeholder Value and Network, Stakeholder Value and Network, Stakeholder Value}, - year = {2020}, - volume = {00}, - number = {page 45}, - pages = {1--30}, - file = {/Users/fabio/Zotero/storage/J3SZ6SIT/SVN.pdf} -} - -@article{neumeyerAddressingResourceWaste2020, - title = {Addressing Resource and Waste Management Challenges Imposed by {{COVID-19}}: {{An}} Entrepreneurship Perspective}, - author = {Neumeyer, Xaver and Ashton, Weslynne S. and Dentchev, Nikolay}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105058}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105058}, - urldate = {2020-08-09}, - abstract = {This perspective calls for building greater understanding of the role that entrepreneurship plays in addressing the challenges to resource and waste management imposed by COVID-19. We contend that researchers and practitioners need to recognize that entrepreneurs are important change agents who can help in the transition to a more sustainable and circular economy. We present challenges as well as opportunities to address this gap with the goal to foster future research.}, - keywords = {Circular economy,COVID-19,Diversity and inclusion,Entrepreneurial ecosystems,Entrepreneurship,Sustainability}, - file = {/Users/fabio/Zotero/storage/S47MIHIW/full-text.pdf} -} - -@article{nevesDriversBarriersTransition2022, - title = {Drivers and Barriers in the Transition from a Linear Economy to a Circular Economy}, - author = {Neves, S{\'o}nia Almeida and Marques, Ant{\'o}nio Cardoso}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {341}, - pages = {130865}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130865}, - urldate = {2022-03-08}, - abstract = {A paradigm shift from a linear economy to a circular economy is crucial to reduce pressure on the environment and to improve the security of supply of primary raw materials. Under this new paradigm, governed by the imperatives of ``reduce, reuse, and recycle'', the extraction of primary resources is minimised by extending the useful life of existing resources and materials. This paper seeks to identify the drivers and barriers of this circularisation and provide guidance for effective policies to hasten the transition to it. The innovative contribution made by this paper to this area of research is the empirical evidence it provides on the role played by economic, social, and environmental factors in the transition to a circular economy. To achieve this, yearly data from 2010 to 2019, for a panel of 19 European Union countries were analysed employing a Panel-Corrected Standard Errors estimator, which was shown to be an appropriate estimator for the data's characteristics. The circular material use rate was used as a proxy for the circular economy. The main findings suggest that the age distribution of a country is a significant predictor of a circular economy. Older people tend to be reluctant to change their behaviour, while young people are more inclined to move away from the so-called `take-make-waste' extractive industrial model. Policies directed to older people to sensibilize them on the benefits and importance of a circular economy are thus required. When per capita income increases, the propensity to accept products containing recycled materials decreases. This finding merits the particular attention of policymakers. In turn, income inequality makes moving toward a circular economy more difficult. Those in the middle-income bracket are more likely to exhibit green behaviour, which implies that they are more aware of environmental issues.}, - keywords = {Circular economy,Circular material use rate,European union,Recycle,Reduce,Reuse} -} - -@article{Nevo2017, - title = {Examining Organizations' Continued Use of Open Source Technologies}, - author = {Nevo, Saggi and {Chengalur-Smith}, InduShobha}, - year = {2017}, - month = mar, - volume = {30}, - number = {1}, - pages = {24--46}, - issn = {0959-3845}, - doi = {10.1108/ITP-09-2014-0204} -} - -@article{Nevrly2020, - title = {Location of Municipal Waste Containers: {{Trade-off}} between Criteria}, - author = {Nevrl{\'y}, Vlastim{\'i}r and {\v S}ompl{\'a}k, Radovan and Smejkalov{\'a}, Veronika and Lipovsk{\'y}, Tom{\'a}{\v s} and Jadrn{\'y}, Josef}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {278}, - pages = {123445}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123445}, - urldate = {2020-08-24}, - file = {/Users/fabio/Zotero/storage/BI2KUYJL/full-text.pdf} -} - -@article{New, - title = {{{EllenMacArthurFoundation}}\_{{TheNewPlasticsEconomy}}\_29-1-16}, - author = {New, The and Economy, Plastics}, - pages = {1--120}, - file = {/Users/fabio/Zotero/storage/L7LKIEN4/The New Plastics Economy - Rethinking the future of plastics.pdf} -} - -@book{NewProductionKnowledge2010, - title = {The {{New Production}} of {{Knowledge}}: {{The Dynamics}} of {{Science}} and {{Research}} in {{Contemporary Societies}}}, - year = {2010}, - publisher = {{SAGE Publications Ltd}}, - address = {{1 Oliver's Yard, 55 City Road, London EC1Y 1SP United Kingdom}}, - doi = {10.4135/9781446221853}, - urldate = {2020-11-02}, - isbn = {978-0-8039-7794-5}, - file = {/Users/fabio/Zotero/storage/W7SK8LB8/full-text.pdf} -} - -@article{ngDoItyourselfLaboratoriesIntegrationbased2020, - title = {Do-{{It-yourself}} Laboratories as Integration-Based Ecosystems\ding{80}}, - author = {Ng, Wilson and Arndt, F{\'e}lix and Huang, Tori Y.}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120249}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120249}, - urldate = {2020-08-24} -} - -@article{ngIssuesChallengesConfronting2021, - title = {Issues and {{Challenges Confronting}} the {{Achievement}} of {{Zero Plastic Waste}} in {{Victoria}}, {{Australia}}}, - author = {Ng, Anne W. M. and Ly, Srenghang and Muttil, Nitin and Nguyen, Cuong Ngoc}, - year = {2021}, - month = feb, - journal = {Recycling}, - volume = {6}, - number = {1}, - pages = {9}, - publisher = {{MDPI AG}}, - issn = {2313-4321}, - doi = {10.3390/recycling6010009}, - urldate = {2021-02-14}, - abstract = {{$<$}p{$>$}Despite the increase in popularity of the zero waste (ZW) concept, the successful implementation of this concept in waste management is still facing many challenges. The plastic recycling rate in Australia is at only about 9.4\% (in 2017\textendash 2018). The state of Victoria (in Australia) has proposed an ambitious 10-year plan to upgrade its waste and recycling system and to divert about 80\% of waste from landfills by 2030. The aim of this research is to study this currently proposed waste management plan and to develop a simulation model to assess the feasibility of achieving 80\% diversion rate by 2030. The feasibility of achieving zero plastic waste by 2035 has also been assessed. In this direction, the existing knowledge of global ZW implementation has been reviewed to gain understanding of the challenges, obstacles, and uncertainties in achieving the ZW target. A simulation model is established using a method called double baselines. This method was developed to address the limitation of data availability for the model development. The model was run in 4 scenarios including one for Victoria's current 10-year plan. Outcomes from the model are produced using six key considerations, including the rate of plastic consumption, waste to landfill, diversion rate, recycling rate, relative accumulative effort, and cost. The findings of this study point out that Victoria's current plan for achieving an 80\% diversion rate by 2030 is possible. On the other hand, the study results also suggest that achieving zero plastic waste by 2035 is less likely to happen. Hence, opportunities for improvement especially towards achieving the zero plastic waste are also presented.{$<$}/p{$>$}}, - keywords = {circular economy,plastic waste,recycling performance,zero waste}, - file = {/Users/fabio/Zotero/storage/PITUA688/full-text.pdf} -} - -@article{ngNotchStaticStrength2020, - title = {Notch Static Strength of Additively Manufactured Acrylonitrile Butadiene Styrene ({{ABS}})}, - author = {Ng, Chin Tze and Susmel, Luca}, - year = {2020}, - month = aug, - journal = {Additive Manufacturing}, - volume = {34}, - pages = {101212}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101212}, - urldate = {2020-07-21}, - abstract = {The present theoretical/experimental investigation deals with the problem of performing the static assessment of notched components made of additively manufactured Acrylonitrile Butadiene Styrene (ABS). The notch strength of this 3D-printed material was investigated by testing a large number of specimens, with the experiments being run not only under tension, but also under three-point bending. The samples contained geometrical features of different sharpness and were manufactured (flat on the build plate) by changing the printing direction. Being supported by the experimental evidence, the hypothesis was formed that the mechanical response of 3D-printed ABS can be modelled effectively by treating it as a material that is linear-elastic, brittle, homogenous and isotropic. This simplifying hypothesis allowed the Theory of Critical Distances to be employed also to assess static strength of 3D-printed ABS containing geometrical features. The validation exercise based on the experimental results being generated demonstrates that this theory is highly accurate, with its use leading to predictions falling mainly within an error interval of about {$\pm$}20\%. This level of accuracy is certainly satisfactory especially because this static assessment methodology can be used in situations of engineering relevance by making use of the results obtained by solving standard linear-elastic Finite Element models.}, - keywords = {Acrylonitrile butadiene styrene (ABS),Additive manufacturing,Critical distance,Notch} -} - -@article{Ngo2018, - title = {Additive Manufacturing ({{3D}} Printing): {{A}} Review of Materials, Methods, Applications and Challenges}, - author = {Ngo, Tuan D. and Kashani, Alireza and Imbalzano, Gabriele and Nguyen, Kate T.Q. and Hui, David}, - year = {2018}, - month = jun, - journal = {Composites Part B: Engineering}, - volume = {143}, - pages = {172--196}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2018.02.012}, - file = {/Users/fabio/Zotero/storage/97NV93RU/Additive manufacturing (3D printing) A review of materials, methods, applications and challenges.pdf} -} - -@article{Nguyen2015, - title = {Factors Influencing Waste Separation Intention of Residential Households in a Developing Country: {{Evidence}} from {{Hanoi}}, {{Vietnam}}}, - author = {Nguyen, Thi Thu Phuong and Zhu, Dajian and Le, Nam Phong}, - year = {2015}, - journal = {Habitat International}, - volume = {48}, - pages = {169--176}, - publisher = {{Elsevier Ltd}}, - issn = {01973975}, - doi = {10.1016/j.habitatint.2015.03.013}, - abstract = {Although various programs of waste separation at source have been deployed over the last decades in developing countries, they have stopped at the level of pilot-programs and have generally not been replicable. This empirical study aims to investigate the factors influencing the intentions in separating waste of residential households in Vietnam's capital city, Hanoi. The waste separation intentions of respondents were judged by the amount of the cash fine that each household was willing to pay as a commitment to participation. An econometric analysis was employed to demonstrate that trust, personal moral norms, perceived difficulties and reciprocity are important factors explaining the residents' behavioral intentions in waste separation. These findings suggest that apart from the improvement of institutional capacity and guarantee of satisfactory facilities and vehicles, communication campaigns to consolidate trust and inspire moral obligations of residents also have an essential role to play in overcoming the common dilemmas of solid waste management in a typical city of a developing country such as Hanoi, Vietnam.}, - isbn = {0197-3975}, - pmid = {10670085}, - keywords = {Behavioral intention,Personal moral norms,Reciprocity,Social dilemmas,Trust,Waste separation}, - file = {/Users/fabio/Zotero/storage/Y2ET7XWX/Factors influencing waste separation intention of residential households in a developing country Evidence from Hanoi, Vietnam.pdf} -} - -@article{nguyenIntellectualPropertyProtection2023, - title = {Intellectual Property Protection Need as a Driver for Open Innovation: {{Empirical}} Evidence from {{Vietnam}}}, - shorttitle = {Intellectual Property Protection Need as a Driver for Open Innovation}, - author = {Nguyen, Thi Phuong Thao and Huang, Fang and Tian, Xiaowen}, - year = {2023}, - month = may, - journal = {Technovation}, - volume = {123}, - pages = {102714}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2023.102714}, - urldate = {2023-02-13}, - abstract = {In previous research, open innovation (OI) has been considered to be driven by the need for new or advanced technologies unavailable within a firm, and to be a process with the risk of leaking intellectual property to competitors. Drawing on the resource-based view, this paper contends that OI increases causal ambiguity and social complexity of the innovation processes, creates imitation barriers to competitors and provides ``informal'' protection of intellectual property. This informal approach is particularly attractive to firms in developing economies where the formal institutional protection for intellectual property is weak. Thus, contrary to conventional wisdom, the need for intellectual property protection (IPP) pushes firms to undertake OI. We test this argument against firm-level data from Vietnam and find supporting evidence: the need for IPP is a robust driver for OI regardless of whether the firm is located in a more competitive or less competitive context. Furthermore, the need for IPP is a stronger driver for small firms than for larger firms.}, - langid = {english}, - keywords = {Developing economies,Informal intellectual property protection,Intellectual property protection need,Open innovation drivers,Resource-based view,Vietnam}, - file = {/Users/fabio/Zotero/storage/PJQUMU8M/S0166497223000251.html} -} - -@article{nguyenIntrinsicMotivationReducing2022, - title = {Intrinsic Motivation for Reducing Single-Use Plastics: {{The}} Compensation Effects of Basic Psychological Needs}, - shorttitle = {Intrinsic Motivation for Reducing Single-Use Plastics}, - author = {Nguyen, Hung Vu and Le, Mai Thi Thu and Do, Long Thanh}, - year = {2022}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {185}, - pages = {106482}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106482}, - urldate = {2022-08-11}, - abstract = {Increasing single-use plastic consumption has caused tremendous consequences for the ecosystem; therefore, consumers are being encouraged to reduce this. Despite numerous research about single-use plastics, we still have little understanding into how individuals' intrinsic motivation for less single-use plastics can be developed. This study extends the self-determination theory about human motivation and the functioning of basic psychological needs which are essential for behavior change to study how three basic psychological needs can influence intrinsic motivation for reducing single-use plastics. Also, the negative interaction effects of each pair of basic psychological needs on intrinsic motivation were examined in this study. A sample of 468 responses collected in a stated preference survey was used to test the theoretical framework. Findings reveal that intrinsic motivation for reducing single-use plastics can be influenced by the satisfaction of basic psychological needs. Interestingly, the research has extended the self-determination theory by highlighting compensation effects among the fulfillment of basic psychological needs on intrinsic motivation for reducing single-use plastics.}, - langid = {english}, - keywords = {Intrinsic motivation,Perceived autonomy,Perceived competence,Perceived relatedness,Pro-environmental consumption behavior,Single-use plastics}, - file = {/Users/fabio/Zotero/storage/BVVW9WJF/S0921344922003251.html} -} - -@article{nguyenLivingLabsChallenging2022, - title = {Living Labs: {{Challenging}} and Changing the Smart City Power Relations?}, - shorttitle = {Living Labs}, - author = {Nguyen, Huong Thu and Marques, Pilar and Benneworth, Paul}, - year = {2022}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {183}, - pages = {121866}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.121866}, - urldate = {2022-08-10}, - abstract = {Smart cities refer to place-specific collaborative systems where multiple actors collaborate to collectively address public problems. However, smart city initiatives regularly frame citizens as the weakest link, as passive consumers rather than active creative agents. This article argues that power imbalances between citizens and other organisational participants structurally mute citizens' voices, ultimately compromising smart cities' aims. Living laboratories are a popular smart city intervention that have the potential to address this power imbalance and empower citizens to influence smart city development. This research theoretically and empirically explores this role of living labs through a multiple-case study of urban living labs in the region of Catalonia. The findings uncover a `power banking' mechanism which, coupled with other critical factors, facilitates the effectiveness of such initiatives. The considerable efforts required to engage citizens at a fairly basic level suggest that incorporating citizens into smart city models is more challenging than simplistic Quadruple Helix discourses convey.}, - langid = {english}, - keywords = {Citizen inclusion,Living labs,Organising collaborative systems,Power relations,Smart cities}, - file = {/Users/fabio/Zotero/storage/U9YILWR5/Nguyen et al_2022_Living labs.pdf;/Users/fabio/Zotero/storage/KZMJF2S4/S0040162522003900.html} -} - -@article{nguyenRecycleWasteTire2022, - title = {Recycle of Waste Tire Rubber in a {{3D}} Printed Composite with Enhanced Damping Properties}, - author = {Nguyen, Hieu Tri and Crittenden, Kelly and Weiss, Leland and Bardaweel, Hamzeh}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {368}, - pages = {133085}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133085}, - urldate = {2022-08-11}, - abstract = {Management of waste tires has become a leading environmental issue due to the global growth in the number of tires produced annually. This work is focused on exploring the use of Ground Tire Rubber (GTR) in a new class of cost-effective, recycled composite materials. A Fused Filament Fabrication (FFF) desktop 3D printer is used to produce GTR-based composite material with up to 50\% wt. rubber filling. ABS is used as the host matrix. Both microscopic and macroscopic characterization of the 3D printed composites are performed in addition to a baseline printed composite. Increasing the rubber content from 0 \% wt. to 50 \% wt. in the 3D printed GTR-based composite results in approximately 260\% improvement in the overall damping properties. Results also indicate the average diameter of the rubber particles in the 3D printed composites increased as the amount of rubber content increased. Presumably, specimens with larger rubber particles yielded longer contact lines with the host polymeric matrix. Consequently, energy dissipation is improved, resulting in enhanced overall damping properties of the 3D printed composites. The enhanced damping capabilities as well as the low-production cost and lightweight characteristics of the presented GTR-filled composite yield new opportunity for application of these GTR-reinforced composites in automotive or other industries for making a wide variety of parts where these characteristics are highly valuable.}, - langid = {english}, - keywords = {3D printing,ABS,Circular economy,Ground tire rubber (GTR),GTR-Reinforced composite,Recycling waste tires,Waste management of tires}, - file = {/Users/fabio/Zotero/storage/Z99WJ6IJ/Nguyen et al_2022_Recycle of waste tire rubber in a 3D printed composite with enhanced damping.pdf;/Users/fabio/Zotero/storage/2UT9GK7Y/S0959652622026750.html} -} - -@article{Niaki2019, - title = {Why Manufacturers Adopt Additive Manufacturing Technologies: {{The}} Role of Sustainability}, - author = {Niaki, Mojtaba Khorram and Torabi, S. Ali and Nonino, Fabio}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {222}, - pages = {381--392}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.019}, - keywords = {additive manufacturing}, - file = {/Users/fabio/Zotero/storage/GQ9I4BYA/Why manufacturers adopt additive manufacturing technologies- The role of sustainability.pdf} -} - -@article{niangVersTerritorialisationDynamiques2022, - ids = {niang2022b}, - title = {{Vers une territorialisation des dynamiques de l'\'economie circulaire ? Analyse du cas fran\c{c}ais, 2008-2015}}, - shorttitle = {{Vers une territorialisation des dynamiques de l'\'economie circulaire ?}}, - author = {Niang, Amadou and Bourdin, S{\'e}bastien and Torre, Andr{\'e}}, - year = {2022}, - month = may, - journal = {Revue d'\'economie industrielle}, - number = {177}, - pages = {67--101}, - publisher = {{De Boeck Sup\'erieur}}, - address = {{Louvain-la-Neuve}}, - issn = {0154-3229}, - doi = {10.4000/rei.11225}, - urldate = {2022-10-01}, - abstract = {Le mod\`ele d'\'economie circulaire, envisag\'e comme une solution adapt\'ee aux d\'efis globaux des changements climatiques, est aujourd'hui souvent propos\'e pour la conception et la fabrication de produits \`a forte valeur ajout\'ee, g\'en\'erateurs de nouvelles activit\'es \'economiques pourvoyeuses d'emplois et de valeur dans les territoires. Cet article contribue \`a analyser l'\'evolution et le degr\'e de concentration spatiale des activit\'es d'\'economie circulaire \`a l'\'echelle des zones d'emploi de la France m\'etropolitaine sur la p\'eriode 2008-2015. Nos r\'esultats mettent en \'evidence une croissance de l'emploi circulaire sup\'erieure \`a celle de l'emploi total. Par ailleurs, nous montrons \`a la fois que les activit\'es circulaires sont davantage m\'etropolitaines et qu'il existe, en France, une diagonale du vide de la localisation des activit\'es d'\'economie circulaire. On observe \'egalement un effet r\'egional marqu\'e de la r\'epartition spatiale des activit\'es circulaires, sugg\'erant une territorialisation des politiques publiques d'\'economie circulaire.Classification JEL~: R10, R50, R58, Q50.}, - copyright = {All rights reserved}, - isbn = {9782807398405}, - langid = {french}, - keywords = {concentration spatiale,croissance de l'emploi,\'economie circulaire,\'etablissement,territorialisation,zones d'emploi}, - file = {/Users/fabio/Zotero/storage/9STSKZ3Y/Niang et al. - 2022 - Vers une territorialisation des dynamiques de l’éc.pdf;/Users/fabio/Zotero/storage/43AGF3BQ/revue-d-economie-industrielle-2022-1-page-67.html} -} - -@article{Niaros2016, - title = {Introducing a Taxonomy of the ``Smart City'': {{Towards}} a Commons-Oriented Approach}, - author = {Niaros, Vasilis}, - year = {2016}, - journal = {TripleC}, - volume = {14}, - number = {1}, - pages = {51--61}, - issn = {1726670X}, - abstract = {During the last decade there has been considerable debate over the relatively vague concept of the ``smart city''. Nowadays, the smart city has crystallised into an image of a city permeated with top-down and centrally controlled technological infrastructures that promise to improve the urban environment in terms of efficiency, security and sustainability. However, many scholars have criticised this perception of networked technologies for not being able to meet the needs of city-dwellers, raising privacy issues, and leading to an increase of environmentally harmful consumption of ICTs. The aim of this article is to contribute to the ongoing dialogue by providing a taxonomy of the smart city, based on certain technology governance models. After theoretically discussing the socio-environmental costs of each model, I argue for a commons-oriented approach which could democratise the means of making and offer more environmental benefits.}, - keywords = {Commons,Microfactories,Open source,Smart city,Technology governance}, - file = {/Users/fabio/Zotero/storage/DHTGBY5L/Introducing a taxonomy of the “smart city” Towards a commons-oriented approach.pdf} -} - -@article{Nichols2017, - title = {Unifying {{Space}} and {{Service}} for {{Makers}}, {{Entrepreneurs}}, and {{Digital Scholars}}}, - author = {Nichols, Jennifer and Melo, Marijel Maggie and Dewland, Jason}, - year = {2017}, - journal = {portal: Libraries and the Academy}, - volume = {17}, - number = {2}, - pages = {363--374}, - issn = {1530-7131}, - doi = {10.1353/pla.2017.0022}, - abstract = {PURPOSE: To develop and explore the validity of the Tutotest, the first standardized instrument designed to assess the skills and attitudes of medical students working in tutorials in a problem-based learning curriculum. METHOD: The Tutotest, consisting of 44 items rated on a four-point Likert-type scale, was developed from well-defined theoretical frameworks after consultation with students and teachers at the Universite de Sherbrooke Faculty of Medicine. In 1988-89, 40 tutors were asked to use the Tutotest to evaluate a total of 100 students at the end of each of the four units of the first-year curriculum. Data were analyzed to examine the homogeneity and reliability of the instrument, explore its factorial structure, and document its correlation with students' grades. RESULTS: A total of 28 tutors (70\%) conducted Tutotest evaluations; of a possible 400 evaluations, 270 (67.5\%) were returned with complete data. Exploratory factor analysis revealed that the Tutotest was structured around four factors that accounted for 82\% of the variance: effectiveness in the group (23 items), communication and leadership skills (13 items), scientific curiosity (four items), and respect for colleagues (four items). The Tutotest had a Cronbach's alpha coefficient of .98 and a split-half coefficient of .98. The intraclass correlation coefficient was estimated to be .46 and would reach up to .81 after averaging five Tutotest evaluations. Tutotest scores showed good correlation (r = .64) with the official tutor's global evaluation and a moderate correlation (r = .39) with students' written examination results. CONCLUSION: The Tutotest was found to be a standardized reliable and valid instrument that can significantly improve the evaluation of students' skills and attitudes during tutorials. Although lengthier than the usual tutor evaluation form, the Tutotest is a good compromise between an unreliable short global scale and a more comprehensive but impractical instrument.}, - file = {/Users/fabio/Zotero/storage/J6PTC3LP/Unifying Space and Service for Makers, Entrepreneurs, and Digital Scholars.pdf} -} - -@article{nicholsonCriticalRoleProcess2022, - title = {The {{Critical Role}} of {{Process Analysis}} in {{Chemical Recycling}} and {{Upcycling}} of {{Waste Plastics}}}, - author = {Nicholson, Scott R. and Rorrer, Julie E. and Singh, Avantika and Konev, Mikhail O. and Rorrer, Nicholas A. and Carpenter, Alberta C. and Jacobsen, Alan J. and {Rom{\'a}n-Leshkov}, Yuriy and Beckham, Gregg T.}, - year = {2022}, - month = jun, - journal = {Annual Review of Chemical and Biomolecular Engineering}, - volume = {13}, - number = {1}, - pages = {301--324}, - issn = {1947-5438, 1947-5446}, - doi = {10.1146/annurev-chembioeng-100521-085846}, - urldate = {2023-08-31}, - abstract = {There is an urgent need for new technologies to enable circularity for synthetic polymers, spurred by the accumulation of waste plastics in landfills and the environment and the contributions of plastics manufacturing to climate change. Chemical recycling is a promising means to convert waste plastics into molecular intermediates that can be remanufactured into new products. Given the growing interest in the development of new chemical recycling approaches, it is critical to evaluate the economics, energy use, greenhouse gas emissions, and other life cycle inventory metrics for emerging processes,relative to the incumbent, linear manufacturing practices employed today. Here we offer specific definitions for classes of chemical recycling and upcycling and describe general process concepts for the chemical recycling of mixed plastics waste. We present a framework for techno-economic analysis and life cycle assessment for both closed- and open-loop chemical recycling. Rigorous application of these process analysis tools will be required to enable impactful solutions for the plastics waste problem.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/ICGJ9WVP/Nicholson et al. - 2022 - The Critical Role of Process Analysis in Chemical .pdf} -} - -@article{Nicolai2015, - title = {The {{Importance}} of {{Strategic Intent}} in {{Developing Innovation Space}}}, - author = {Nicolai, Claudia}, - year = {2015}, - journal = {Proceedings of ISPIM Conferences}, - number = {December}, - pages = {14482}, - abstract = {This paper offers first insights into defining strategic intent for the development of so-called innovation labs. Organizations are invested to establish workspaces promoting innovation on various levels. These spaces are supposed to serve as a provider of resources, a facilitator of mindset and work modes, and as a communicator of the company's own culture. On an academic level, previous research has mostly focused on established physical environments, disregarding the usefulness and necessity of a preceding strategic intent. On a practical level, companies too often copy best practice examples of innovation labs without having a clear explicit intention. Based on the qualitative study of two organizations currently implementing an innovation lab, this paper introduces a collection of categories defining strategic intent preceding the establishment of innovation laboratories within organizations. Based on these, it becomes possible to compare the strategic intent of different compani)}, - keywords = {case-study research,Corporate culture,dimensions of workspace,innovation culture,innovation lab,Innovations in business,office design,Offices -- Design \& construction,Planning,RESEARCH,strategic intent,Strategic planning} -} - -@article{Nicolle1999a, - title = {{{USERfit}} - {{Design}} for All Methods and Tools}, - author = {Nicolle, C A}, - year = {1999}, - pages = {11--12}, - abstract = {This is a conference paper.} -} - -@article{Nicolletti2019, - title = {Social and Organizational Learning in the Adaptation to the Process of Climate Change: {{The}} Case of a {{Brazilian}} Thermoplastic Resins and Petrochemical Company}, - author = {Nicolletti, Mariana and Lutti, Natalia and Souza, Renato and Pagotto, L{\'i}via}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {226}, - pages = {748--758}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.058}, - urldate = {2020-05-21}, - abstract = {Since climate change involves uncertainty, complexity and massive, rapid disruptions, companies seeking to adapt need to search for specific and non-traditional knowledge. Social learning approaches have emerged as a promising way to address the issue of adaptation to climate change. This paper examines the structuring of a business strategy for adaptation in a Brazilian thermoplastic resin and petrochemical company to exemplify the extent to which internal changes in the organization's understanding, norms and values derived from a social learning process. Hence, the main research question is ``how are learning processes within a company\textemdash organizational learning\textemdash and social interaction in a Community of Practice\textemdash social learning\textemdash related and how do they contribute to leveraging changes in management practices in a company's adaptation to climate change?'' The case study presents how the company's representatives' participation in a social learning process within a CoP supported not only the development of a comprehensive adaptation strategy but also the mainstreaming of climate concepts, impacts and adaptation actions. Therefore, it demonstrated that combining social learning and organization learning processes is useful to consistently build resilience, given that they are mutually supportive in the recognition of the relevance of adaptation, the dissemination of risk perception throughout the organization and the development of an internal capacity to continuously plan and act.}, - keywords = {Business risk management,Climate change adaptation,Community of practice,Organizational learning,Social learning} -} - -@article{Nicolopoulou2017, - title = {An Incubation Perspective on Social Innovation: The {{London Hub}} - a Social Incubator}, - author = {Nicolopoulou, Katerina and {Karata{\c s}-{\"O}zkan}, Mine and Vas, Christopher and Nouman, Muhammad}, - year = {2017}, - month = jun, - journal = {R\&D Manag.}, - volume = {47}, - number = {3}, - pages = {368--384}, - publisher = {{Blackwell Publishing Ltd}}, - issn = {00336807}, - doi = {10.1111/radm.12179}, - abstract = {In the context of incubators, particularly those that are driven to achieving social objectives, this paper investigates core processes that support the development of social innovation. Social innovation, as this paper argues, is underpinned by a new form of social collaboration and engagement built upon strong forms of sharing knowledge and learning. Coupled with this is the element of social capital reinforced by entrepreneurship and leadership that promotes sustainability in the community. These factors drive innovative thinking and ways of engaging among stakeholders in order to create new forms of socio-economic impact. Such value-creating activity occurs in firms that operate within incubators involving a wide range of stakeholders who work through networks to co-create and meet social challenges. Through a case study of a social incubator and an incubatee, we demonstrate the core processes that irradiate the argument on social innovation. The contribution of this paper is threefold: First, social innovation is an emerging area of research, of which there is a dearth in terms of examining the processes empirically. We address the gap in this field by demonstrating the value of social collaboration and engagement using different innovation models. Second, we establish links between social innovation and incubation using the concept of social capital. This allows us to achieve our third contribution: exemplification of a dyadic value-based partnership and collaboration processes between an incubator and an incubatee, through activities driven by social innovation that aim to have social impact. The paper concludes with practice implications and suggests directions for future research.} -} - -@article{Nielsen2019, - title = {Exploring the Intervention of Intermediary in a Green Supply Chain}, - author = {Nielsen, Izabela Ewa and Majumder, Sani and Saha, Subrata}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {233}, - pages = {1525--1544}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.071}, - urldate = {2020-05-15}, - abstract = {In many countries, the contribution of unorganized or micro-retailers to the overall economy and sustainability is a topic of increasing importance. Although these retailers are commonly dependent on the intermediaries for trading, there is scarce literature addressing the influence of intermediaries in green supply chain practice. This study explores the repercussions of a dominant intermediary in a three-echelon green supply chain under price and greening level sensitive demand in both single and two-period setting. The results demonstrates that the manufacturer is able to sell maximum amount of products and the retailer receives higher profits if an intermediary dominates the market. A dominant intermediary can urge the manufacturer to promote products with a lower greening level. In such scenario, the unit R\&D investment in producing green products is less, but each participant may receive higher profits. A sequential profit-sharing mechanism is proposed from the perspective of the manufacturer that can be employed under leadership of the wholesaler. Under this mechanism, the retailer can maintain strategic inventory, each member can receive higher profits, and most importantly, the manufacturer can promote products at highest greening level to achieve sustainability goals. If consumer takes into account the GL-price ratio, then two-period procurement planning always outperforms single period optimal decision under manufacturer-Stackelberg game. The insights can assist manufacturers to create a foundation for sustainable business practices.}, - keywords = {Green supply chain management,Profit-sharing,Stackelberg game,Strategic inventory,Three-echelon supply chain} -} - -@article{nieto-romeroRebuildingHistoricalCommons2021, - title = {Re-Building Historical Commons: {{How}} Formal Institutions Affect Participation in Community Forests in {{Galicia}}, {{Spain}}}, - author = {{Nieto-Romero}, M. and Parra, C. and Bock, B.}, - year = {2021}, - month = oct, - journal = {Ecological Economics}, - volume = {188}, - pages = {107112}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107112}, - urldate = {2021-07-05}, - file = {/Users/fabio/Zotero/storage/494IHA4Q/full-text.pdf} -} - -@article{nikiemaReviewCostEffectiveness2022, - title = {A Review of the Cost and Effectiveness of Solutions to Address Plastic Pollution}, - author = {Nikiema, Josiane and Asiedu, Zipporah}, - year = {2022}, - month = apr, - journal = {Environmental Science and Pollution Research}, - volume = {29}, - number = {17}, - pages = {24547--24573}, - issn = {1614-7499}, - doi = {10.1007/s11356-021-18038-5}, - urldate = {2023-08-30}, - abstract = {Plastic usage increases year by year, and the growing trend is projected to continue. However as of 2017, only 9\% of the 9 billion tons of plastic ever produced had been recycled leaving large amounts of plastics to contaminate the environment, resulting in important negative health and economic impacts. Curbing this trend is a major challenge that requires urgent and multifaceted action. Based on scientific and gray literature mainly published during the last 10 years, this review summarizes key solutions currently in use globally that have the potential to address at scale the plastic and microplastic contaminations from source to sea. They include technologies to control plastics in solid wastes (i.e. mechanical and chemical plastic recycling or incineration), in-stream (i.e. booms and clean-up boats, trash racks, and sea bins), and microplastics (i.e. stormwater, municipal wastewater and drinking water treatment), as well as general policy measures (i.e. measures to support the informal sector, bans, enforcement of levies, voluntary measures, extended producer responsibility, measures to enhance recycling and guidelines, standards and protocols to guide activities and interventions) to reduce use, reuse, and recycle plastics and microplastics in support of the technological options. The review discusses the effectiveness, capital expenditure, and operation and maintenance costs of the different technologies, the cost of implementation of policy measures, and the suitability of each solution under various conditions. This guidance is expected to help policymakers and practitioners address, in a sustainable and cost-efficient way, the plastic and microplastic management problem using technologies and policy instruments suitable in their local context.}, - langid = {english}, - keywords = {Microplastic,Plastic,Policy measures,Pollution control,Solutions,Waste management,Wastewater,Water}, - file = {/Users/fabio/Zotero/storage/BDG46URR/Nikiema y Asiedu - 2022 - A review of the cost and effectiveness of solution.pdf} -} - -@article{nikolaouIntroductionCircularEconomy2021, - title = {An Introduction to Circular Economy and Sustainability: {{Some}} Existing Lessons and Future Directions}, - author = {Nikolaou, Ioannis E. and Tsagarakis, Konstantinos P.}, - year = {2021}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {28}, - pages = {600--609}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2021.06.017}, - urldate = {2021-08-10}, - abstract = {This introductory paper to the special issue ``Circular economy and sustainability: The role of technology, producers, consumers and policy'' serves three main goals. The first one is to analyze the theoretical context of circular economy from a triple-level approach (i.e. micro, meso and macro-level) and their relationship with sustainability as they are formulated in the current literature. The second goal puts emphasis on analyzing the main contributions of the published articles in the special issue to the triple-level approach and sustainability concept. The final goal focuses on analyzing the future prospects of the relationship of the circular economy and sustainability through the findings of the articles of this special issue.}, - keywords = {Circular business model,Circular economy policies,Industrial ecology,Industrial symbiosis,Macro-level circular economy,Meso-level share economy,Micro-level circular economy,Sustainable development}, - file = {/Users/fabio/Zotero/storage/2PHY2IGI/full-text.pdf} -} - -@article{Nikzad2011, - title = {Thermo-Mechanical Properties of a Highly Filled Polymeric Composites for {{Fused Deposition Modeling}}}, - author = {Nikzad, M. and Masood, S.H. and Sbarski, I.}, - year = {2011}, - month = jun, - journal = {Materials \& Design}, - volume = {32}, - number = {6}, - pages = {3448--3456}, - publisher = {{Elsevier Ltd}}, - issn = {02613069}, - doi = {10.1016/j.matdes.2011.01.056}, - urldate = {2013-03-14}, - keywords = {composite,polymer matrix}, - file = {/Users/fabio/Zotero/storage/VJF24SP2/Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling.pdf} -} - -@article{nilsenHierarchyResourceUse2020, - title = {The Hierarchy of Resource Use for a Sustainable Circular Economy}, - author = {Nilsen, Heidi Rapp}, - year = {2020}, - month = jan, - journal = {International Journal of Social Economics}, - volume = {47}, - number = {1}, - pages = {27--40}, - publisher = {{Emerald Publishing Limited}}, - issn = {0306-8293}, - doi = {10.1108/IJSE-02-2019-0103}, - urldate = {2023-08-31}, - abstract = {Purpose The original principles of the hierarchy of resource use seem to have been forgotten. The purpose of this paper is to address the necessity of these principles in order for a circular economy (CE) to be sustainable. Design/methodology/approach This is a general review paper explaining today's shortcomings in a CE and in the waste hierarchy. Its theoretical contribution is illustrated using the example of marine plastic waste in the Arctic, as well as the EU's action plan for a CE: ``Closing the loop''. Findings There is a need to reduce raw materials into the economy directly and not only as a potential result of recycling. This is supported theoretically and by illustrating that the EU's action plan is closing the loop primarily from the output side. Research limitations/implications The theoretical possibility of complete recycling rests on a premise that is now at odds with a sustainable development. Social implications The power of existing raw material production cycles must be challenged to allow reduction to be a real option. If not, a CE may exacerbate a moral trade-off by the current generation reducing the safe operating space of future living beings. Originality/value The theoretical possibility of recycling everything, also known as the technology-optimist view, has played the role of a safety net for humanity. As we are now exceeding planetary boundaries for a safe and just space for humanity, this theoretical safety net is no longer valid. Instead, we must reinforce the basic principles of the hierarchy of resource use.}, - keywords = {Circular economy,Ecology,Resources,Social justice,Sustainability,Waste hierarchy} -} - -@article{Nilsiam2017, - title = {Free and {{Open Source}} 3-{{D Model Customizer}} for {{Websites}} to {{Democratize Design}} with {{OpenSCAD}}}, - author = {Nilsiam, Yuenyong and Pearce, Joshua M.}, - year = {2017}, - month = jul, - journal = {Designs}, - volume = {1}, - number = {1}, - pages = {5}, - issn = {2411-9660}, - doi = {10.3390/designs1010005}, - abstract = {Growth rates were determined for copepodites of the genera: Acartia, Centropages, Corycaeus, Oithona, Paracalanus, Parvocalanus and Temora in nearshore waters of Jamaica from in situ microcosm incubations. At these high local temperatures (similar to 28 degrees C), total copepodite development time was as short as 4 to 5 d. Mean instantaneous growth rates (g) ranged from as high as 1.2 d(-1) to as low as 0.1 d(-1). In general, cyclopoid copepods appeared to grow more slowly than calanoids of the same size. Enhancement of resources by nutrient addition caused a 32\% increase in growth rates in experiments from a mesotrophic site, but only a 17\% increase at a more eutrophic site. Additionally, copepodites at both sites showed faster development and generally larger size at stage in response to nutrient addition. Growth rates were positively related to chlorophyll concentration in the {$>$}2 mu m size-fraction. A significant relationship of growth rate to body size (r(2) = 0.45) emerged across a wide range of trophic status, but it was confounded with resource availability. It appears that growth in tropical copepod copepodites may be frequently limited by resources in a size-dependent manner.}, - isbn = {1906487146}, - file = {/Users/fabio/Zotero/storage/GUB7CLFU/Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD.pdf} -} - -@incollection{Nilsson2015, - title = {The Social Innovation Lab: {{An}} Experiment in the Pedagogy of Institutional Work}, - booktitle = {Bus. {{Soc}}. {{Environ}}. {{Innov}}. {{New}} Front. {{Africa}}}, - author = {Nilsson, Warren and Bonnici, Francois and Griffin EL, Eliada W.}, - year = {2015}, - month = jan, - pages = {201--212}, - publisher = {{Springer International Publishing}}, - doi = {10.1007/978-3-319-04051-6_11}, - abstract = {The Social Innovation Lab is a pedagogical experiment within the MBA programme of the University of Cape Town Graduate School of Business. Exploring social innovation through the lens of institutional work, the Lab asks participants, who have not formerly identified themselves as social change agents, to begin to think and act like system innovators. The Lab develops an action heuristic by drawing on research in the fields of institutional theory, positive organizational scholarship, critical pedagogy, network theory, and stakeholder engagement, among others. This heuristic focuses on shifting from a corrective action lens to a transformative action lens. Using this lens, Lab participants engage in real-world, real-time social innovation projects of their own devising.}, - isbn = {978-3-319-04051-6}, - keywords = {Institutional work,MBA students,Social innovation,Transformative action heuristic,University of Cape Town} -} - -@article{Ning2015, - title = {Additive Manufacturing of Carbon Fiber Reinforced Thermoplastic Composites Using Fused Deposition Modeling}, - author = {Ning, Fuda and Cong, Weilong and Qiu, Jingjing and Wei, Junhua and Wang, Shiren}, - year = {2015}, - journal = {Composites Part B: Engineering}, - volume = {80}, - pages = {369--378}, - publisher = {{Elsevier Ltd}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2015.06.013}, - abstract = {Additive manufacturing (AM) technologies have been successfully applied in various applications. Fused deposition modeling (FDM), one of the most popular AM techniques, is the most widely used method for fabricating thermoplastic parts those are mainly used as rapid prototypes for functional testing with advantages of low cost, minimal wastage, and ease of material change. Due to the intrinsically limited mechanical properties of pure thermoplastic materials, there is a critical need to improve mechanical properties for FDM-fabricated pure thermoplastic parts. One of the possible methods is adding reinforced materials (such as carbon fibers) into plastic materials to form thermoplastic matrix carbon fiber reinforced plastic (CFRP) composites those could be directly used in the actual application areas, such as aerospace, automotive, and wind energy. This paper is going to present FDM of thermoplastic matrix CFRP composites and test if adding carbon fiber (different content and length) can improve the mechanical properties of FDM-fabricated parts. The CFRP feedstock filaments were fabricated from plastic pellets and carbon fiber powders for FDM process. After FDM fabrication, effects on the tensile properties (including tensile strength, Young's modulus, toughness, yield strength, and ductility) and flexural properties (including flexural stress, flexural modulus, flexural toughness, and flexural yield strength) of specimens were experimentally investigated. In order to explore the parts fracture reasons during tensile and flexural tests, fracture interface of CFRP composite specimens after tensile testing and flexural testing was observed and analyzed using SEM micrograph.}, - keywords = {A. Carbon fibre,A. Polymer-matrix composites (PMCs),B. Mechanical properties,D. Mechanical testing,E. Extrusion}, - file = {/Users/fabio/Zotero/storage/7P4MQAKU/Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling.pdf} -} - -@article{NinlaElmawatiFalabiba2019, - title = {Energy {{Analysis}} and {{Economic Valuation}}}, - author = {{Georgescu-Roegen}, Nicholas}, - year = {1979}, - month = apr, - journal = {Southern Economic Journal}, - volume = {45}, - number = {4}, - eprint = {1056953}, - eprinttype = {jstor}, - pages = {1023}, - issn = {00384038}, - doi = {10.2307/1056953}, - abstract = {Predicting the binding mode of flexible polypeptides to proteins is an important task that falls outside the domain of applicability of most small molecule and protein-protein docking tools. Here, we test the small molecule flexible ligand docking program Glide on a set of 19 non-{$\alpha$}-helical peptides and systematically improve pose prediction accuracy bynhancing Glide sampling for flexible polypeptides. In addition, scoring of the poses was improved by post-processing with physics-based implicit solvent MM- GBSA calculations. Using the best RMSD among the top 10 scoring poses as a metric, the success rate (RMSD {$\leq$} 2.0 \AA{} for the interface backbone atoms) increased from 21\% with default Glide SP settings to 58\% with the enhanced peptide sampling and scoring protocol in the case of redocking to the native protein structure. This approaches the accuracy of the recently developed Rosetta FlexPepDock method (63\% success for these 19 peptides) while being over 100 times faster. Cross-docking was performed for a subset of cases where an unbound receptor structure was available, and in that case, 40\% of peptides were docked successfully. We analyze the results and find that the optimized polypeptide protocol is most accurate for extended peptides of limited size and number of formal charges, defining a domain of applicability for this approach.}, - isbn = {9781119130536}, - file = {/Users/fabio/Zotero/storage/VC2ZINLV/Geroges.pdf} -} - -@inproceedings{Nino2015, - title = {Multiple Objective Optimization Using Desirability Functions for the Design of a {{3D}} Printer Prototype}, - booktitle = {{{IIE Annual Conference}} and {{Expo}} 2015}, - author = {Ni{\~n}o, Esmeralda and Rosas, J.F. and Bonet, S.A. and Ram{\'i}rez, Nazario and {Cabrera-R{\'i}os}, M.}, - year = {2015}, - pages = {2015}, - abstract = {Experimental designs and Response Surface Methodology (RSM) play an important role when several and possibly conflicting responses have to be simultaneously optimized. This is the case for the development of a 3D printer prototype; specifically an interlocking device designed with two responses, max-load and mass, with different conflicting optimization goals. The purpose of this interlocking device is to serve as a possible means of recycling polyethylene terephthalate water bottles by repurposing them as prototype that can be fashioned into several new products or objects with different uses. Design of experiments is the initial step taken to identify and evaluate the best tradeoff between the responses; a Box Behnken design (BBD) is used to establish the experimental design. The applications of RSM with desirability functions are critical to find the perfect prototype with the adequate geometry to satisfy multiples needs. Results from the analysis reveals that diameter and depth were held constant in the majority of the solutions, however, thickness played an important role in the solution. The sensitivity analysis reports a maximum associated with a small percentage of change between the solutions provided by the different scenarios when different power values of desirability function were explored. The best interlocking device that provides a trade-off between mass minimization and max-load maximization is a design with a diameter of 0.92 inches, a depth of 0.041 inches and a thickness of 0.381 inches.}, - isbn = {978-0-9837624-4-7}, - keywords = {3D printing,Desirability functions,Experimental design,Multiple criteria optimization,Surface response methodology}, - file = {/Users/fabio/Zotero/storage/58ZXL6GZ/Niño et al. - 2015 - Multiple Objective Optimization Using Desirability Functions for the Design of a 3D Printer Prototype.pdf} -} - -@article{Nishijima2012, - title = {Life Cycle Assessment of Integrated Recycling Schemes for Plastic Containers and Packaging with Consideration of Resin Composition}, - author = {Nishijima, Asako and Nakatani, Jun and Yamamoto, Kazuo and Nakajima, Fumiyuki}, - year = {2012}, - month = mar, - journal = {Journal of Material Cycles and Waste Management}, - volume = {14}, - number = {1}, - pages = {52--64}, - issn = {1438-4957}, - doi = {10.1007/s10163-011-0032-y}, - file = {/Users/fabio/Zotero/storage/IMVENP6S/Life cycle assessment of integrated recycling schemes for plastic containers and packaging with consideration of resin composition.pdf} -} - -@article{Nithya2020, - title = {Electronic Waste Generation, Regulation and Metal Recovery: A Review}, - author = {Nithya, Rajarathinam and Sivasankari, Chandrasekaran and Thirunavukkarasu, Arunachalam}, - year = {2020}, - month = oct, - journal = {Environmental Chemistry Letters}, - number = {3}, - pages = {1--22}, - publisher = {{Springer Science and Business Media Deutschland GmbH}}, - issn = {16103661}, - doi = {10.1007/s10311-020-01111-9}, - urldate = {2021-01-04}, - abstract = {Waste will become the major resource in the future circular economy. In particular, E-waste is a major sector growing at an annual rate of about 2 million tonnes (Mt) with rising users of electrical and electronic items worldwide. This is a consequence of versatility and affordability of technological innovation, thus resulting in massive sales and e-waste increases. Most end-users lack knowledge on proper recycling or reuse, often disposing of e-waste as domestic waste. Such improper disposals are threatening life and ecosystems because e-waste is rich in toxic metals and other pollutants. Here we review e-waste generation, policies and recycling methods. In 2019, the world e-waste production reached 53.6 Mt, including 24.9 Mt in Asia, 13.1 Mt in USA, 12 Mt in Europe. In Asia, China (10.1 Mt), India (3.23 Mt), Japan (2.57 Mt) and Indonesia (1.62 Mt) are the largest producers contributing to about 70\% of the total world e-waste generated. Only 17.4\% (9.3 Mt) of the world e-waste was recycled by formal means, and the remaining 82.6\% (44.3 Mt) was left untreated or processed informally. As a consequence, most countries have framed policies to provide regulatory guidelines to producers, end-users and recyclers. Yet the efficiency of these local policies are limited by the transfer of products across borders in a globalized world. Among formal recycling techniques, biohydrometallurgy appears most promising compared to pyrometallurgy and hydrometallurgy, because biohydrometallurgy overcomes limitations such as poor yield, high capital cost, toxic chemicals, release of toxic gases and secondary waste generation. Challenges include consumer's contempt on e-waste disposal, the deficit of recycling firms and technology barriers.}, - keywords = {Bio-hydrometallurgy,e-waste,e-waste management,Generation,Hydro-metallurgy,Informal and formal recycling,Metal recovery process,Practical challenges,Pyro-metallurgy,Regulations}, - file = {/Users/fabio/Zotero/storage/6VAHWPZB/full-text.pdf} -} - -@article{niuHowEfficientHighvalue2023, - title = {How to Efficient and High-Value Recycling of Electronic Components Mounted on Waste Printed Circuit Boards: {{Recent}} Progress, Challenge, and Future Perspectives}, - shorttitle = {How to Efficient and High-Value Recycling of Electronic Components Mounted on Waste Printed Circuit Boards}, - author = {Niu, Bo and Shanshan, E. and Xu, Zhenming and Guo, Jie}, - year = {2023}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {415}, - pages = {137815}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137815}, - urldate = {2023-07-03}, - abstract = {The recycling of waste printed circuit boards (WPCBs) has attracted global attention because of their increasingly huge quantity, hazardous character, and high recovery values. There are plenty of reviews about the recycling of baseboards. In addition to basal boards, various and hundreds of electronic components (ECs) are mounted on the surface of WPCBs. Almost precious metals (gold and tantalum, etc.) are enriched in ECs. Meanwhile, the more hazardous organics (electrolytes, etc.) make the recycling of waste ECs a challenge. Increasing studies have focused on waste ECs recycling. However, few timely reviews summarized the recent progress, challenge, and future perspectives. Moreover, how to efficient and high-value recycling of ECs has not well been revealed. Herein, this review in-depth analyzed and discussed the recycling of waste ECs mounted on the surface of WPCBs including: dismantling, pollutant release and treatment, classification, resource recovery, and high-value utilization. Besides the traditional dismantling process, we introduce the application of emerging artificial intelligence and machine learning. The release rules of pollutants are revealed and their treatment are described. Moreover, the hydrometallurgy and pyrometallurgy processes for resource recovery from various waste ECs are summarized. Particularly, a new idea of high-value utilization waste ECs as catalysts is also highlighted. The technologies' advantages and disadvantages are illustrated and indicate which processes are promising for industrialized applications. Finally, the challenges in waste ECs recycling are analyzed and future perspectives are proposed. This comprehensive review article reveals the research gap in waste ECs recycling, which contributes to guiding waste ECs recycling towards more efficient and high-value.}, - langid = {english}, - keywords = {High-value utilization,Resource recycling,Waste electronic components,Waste printed circuit boards}, - file = {/Users/fabio/Zotero/storage/3P5EYJW4/S095965262301973X.html} -} - -@article{Nizetic2020, - title = {Internet of {{Things}} ({{IoT}}): {{Opportunities}}, Issues and Challenges towards a Smart and Sustainable Future}, - author = {Ni{\v z}eti{\'c}, Sandro and {\v S}oli{\'c}, Petar and {L{\'o}pez-de-Ipi{\~n}a Gonz{\'a}lez-de-Artaza}, Diego and Patrono, Luigi}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {274}, - pages = {122877}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122877}, - urldate = {2020-08-09}, - abstract = {The rapid development and implementation of smart and IoT (Internet of Things) based technologies have allowed for various possibilities in technological advancements for different aspects of life. The main goal of IoT technologies is to simplify processes in different fields, to ensure a better efficiency of systems (technologies or specific processes) and finally to improve life quality. Sustainability has become a key issue for population where the dynamic development of IoT technologies is bringing different useful benefits, but this fast development must be carefully monitored and evaluated from an environmental point of view to limit the presence of harmful impacts and ensure the smart utilization of limited global resources. Significant research efforts are needed in the previous sense to carefully investigate the pros and cons of IoT technologies. This review editorial is partially directed on the research contributions presented at the 4th International Conference on Smart and Sustainable Technologies held in Split and Bol, Croatia, in 2019 (SpliTech 2019) as well as on recent findings from literature. The SpliTech2019 conference was a valuable event that successfully linked different engineering professions, industrial experts and finally researchers from academia. The focus of the conference was directed towards key conference tracks such as Smart City, Energy/Environment, e-Health and Engineering Modelling. The research presented and discussed at the SpliTech2019 conference helped to understand the complex and intertwined effects of IoT technologies on societies and their potential effects on sustainability in general. Various application areas of IoT technologies were discussed as well as the progress made. Four main topical areas were discussed in the herein editorial, i.e. latest advancements in the further fields: (i) IoT technologies in Sustainable Energy and Environment, (ii) IoT enabled Smart City, (iii) E-health \textendash{} Ambient assisted living systems (iv) IoT technologies in Transportation and Low Carbon Products. The main outcomes of the review introductory article contributed to the better understanding of current technological progress in IoT application areas as well as the environmental implications linked with the increased application of IoT products.}, - keywords = {Energy,Environment,IoT,Smart city,SpliTech2020,Sustainability}, - file = {/Users/fabio/Zotero/storage/EP9BWX24/full-text.pdf} -} - -@article{Nobre2017, - title = {Scientific Literature Analysis on Big Data and Internet of Things Applications on Circular Economy: A Bibliometric Study}, - author = {Nobre, Gustavo Cattelan and Tavares, Elaine}, - year = {2017}, - month = apr, - journal = {Scientometrics}, - volume = {111}, - number = {1}, - pages = {463--492}, - issn = {0138-9130}, - doi = {10.1007/s11192-017-2281-6}, - file = {/Users/fabio/Zotero/storage/4PT7BGTH/Scientific literature analysis on big data and internet of things applications on circular economy- a bibliometric study.pdf} -} - -@article{nobreQuestCircularEconomy2021, - title = {The Quest for a Circular Economy Final Definition: {{A}} Scientific Perspective}, - author = {Nobre, Gustavo Cattelan and Tavares, Elaine}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {314}, - pages = {127973}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127973}, - urldate = {2021-07-05}, - abstract = {Circular Economy (CE) has been one of the most transformational tendencies for the past years. What seemed to be one more organizational hype, is now appearing as a global trend, affecting macro, meso and microenvironments, ranging from governments, global organizations (such as the UN), the whole private sector, science, to final consumers and individuals. Despite the numerous CE definitions, a common sense regarding what CE means is still subject of studies. This opens space for misinterpretation and misuse, as well as greenwashing and image depreciation risks. Consequently, some organizations tend to shape CE to their own definitions and paradigms rather than changing their businesses. This article builds on previous work and aims to establish a common-sense CE definition, separating it from its enablers and related concepts, which seem to be the root causes of misuse. We asked 44 worldwide CE experts PhDs the same question: ``Using your own words, please describe what you understand by ``Circular Economy''. Database was compiled and analysed through a coded framework and triangulated with the support of R statistical tool. The main outcome is a final definition proposal, along with a structured CE framework. It is expected this research will provide resources to allow standards organizations to establish formal cross-industry CE policies and regulations, leading to scales, targets, KPI's development for CE assessments and audits; and guide organizations and governments on their CE transition roadmaps.} -} - -@article{nogueiraExploringIndustrialDynamics2023, - title = {Exploring the Industrial Dynamics of Waste Management and Recycling: {{A}} Call for Research and a Proposed Agenda}, - shorttitle = {Exploring the Industrial Dynamics of Waste Management and Recycling}, - author = {Nogueira, Leticia Antunes}, - year = {2023}, - month = oct, - journal = {Waste Management}, - volume = {170}, - pages = {33--39}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.07.022}, - urldate = {2023-08-31}, - abstract = {The waste management sector is undergoing profound transformations that challenge its structures and institutions. The function and position of waste management and recycling companies have been changing, and this process accelerates as the circular economy consolidates as part of the strategy to implement green shifts. This article argues that scholars, practitioners and policymakers interested in waste management could benefit from building bridges with the field of industrial dynamics. Industrial dynamics is concerned with the driving forces of economic transformation, with focus on not just outcomes but processes and structures. This type of research is crucial in face of transformations going on in the sector. Three crucial themes for cross-disciplinary investigation are: (i) industry evolution and institutions, (ii) business organization and management, and (iii) technological change, innovation and entrepreneurship. Waste management is a lively, complex and diverse sector, whose process of reinvention present the opportunity to research profound industrial transformations in real time. By systematically investigating the industrial dynamics of waste management, it becomes possible to uncover the structural changes underpinning the transformation of waste into resources, their driving forces and the directions to which they point, while mindful of the evolving discourses and the wider technological and institutional landscape.}, - keywords = {Circular economy,Industrial dynamics,Industry evolution,Sustainability transitions,Waste management}, - file = {/Users/fabio/Zotero/storage/JIDZBZMA/S0956053X23004968.html} -} - -@article{nogueirazonWastePickersOrganizations2020, - title = {Waste Pickers Organizations and Municipal Selective Waste Collection: {{Sustainability}} Indicators}, - author = {Nogueira Zon, J{\'e}ssica Luiza and Jacobsen Leopoldino, Chaila and Yamane, Luciana Harue and Ribeiro Siman, Renato}, - year = {2020}, - month = dec, - journal = {Waste Management}, - volume = {118}, - pages = {219--231}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.08.023}, - urldate = {2020-09-13}, - abstract = {Brazilian municipalities face several difficulties while carrying out the municipal selective waste collection (MSWC); at the same time, waste pickers organizations (WPOs) need to overcome many challenges to compete in the waste management market. In order to reach the requirements of the Brazilian National Solid Waste Policy (NSWP), it is necessary to know which factors interfere in the performance of MSWC programs and WPOs to understand the relationships between these factors. The objective of this paper was to evaluate the sustainability of MSWC programs and WPOs in the State of Esp\'irito Santo, Brazil, and propose a new methodological strategy. For data collection, questionnaires were given to municipal civil workers from 24 municipalities and managers of 23 WPOs to calculate sustainability indicators and their correlations. Means and frequencies were calculated to analyze indicators in relation to sustainability; peer-to-peer correlation analyses were performed to the construct graphs that obtained correlation coefficients, which were applied to study the normality distribution. For each indicator, we provided necessary investments to practical solutions. As a result, a methodological proposal was presented to improve their actions, which was hierarchized by degrees of temporal urgency for their implementation. The design of the actions has great potential to improve and develop sustainability practices in WPOs and MSWC programs. Due to the low quality of primary data collected, we recommend the creation of the data control systems to continuously monitor.}, - keywords = {Brazilian Municipalities,Selective Waste Collection,Sustainability Indicators,Waste Pickers Organizations} -} - -@article{noklebyePlasticBansIndia2023, - title = {Plastic Bans in {{India}} \textendash{} {{Addressing}} the Socio-Economic and Environmental Complexities}, - author = {N{\o}klebye, Emmy and Adam, Hans Nicolai and {Roy-Basu}, Avanti and Bharat, Girija K. and Steindal, Eirik Hovland}, - year = {2023}, - month = jan, - journal = {Environmental Science \& Policy}, - volume = {139}, - pages = {219--227}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.11.005}, - urldate = {2022-12-12}, - abstract = {As one of the flagship amendments to the Plastic Waste Management (PWM) Rules, 2021, the pan-Indian ban on a group of single-use plastic products (SUPPs) introduced in mid-2022 provided a departure point towards more progressive plastic waste legislation. The amendments have mostly been welcomed, yet challenges persist to facilitate its implementation, assess potential environmental impacts of alternative materials, and socio-economic concerns raised by various stakeholders. Considering the recent amendments to the PWM Rules, we critically engage with and highlight key considerations and prevailing challenges with regards to phasing out SUPPs. We argue that to shape sustainable solutions that reduce plastic pollution, uncertainties related to the environmental fate of SUPP alternatives need to be better understood, whilst recognising and accounting for broader socio-economic impacts of SUPP bans, including industry concerns, impacts on socio-economically disadvantaged communities, and the informal recycling sector. A stronger knowledge base on these aspects can mitigate negative social and environmental externalities, including potentially harmful consequences of ambitious plastic pollution reduction measures.}, - langid = {english}, - keywords = {governance,India,plastic pollution,plastic waste management,Single-use plastic products}, - file = {/Users/fabio/Zotero/storage/YLZH657B/Nøklebye et al_2023_Plastic bans in India – Addressing the socio-economic and environmental.pdf;/Users/fabio/Zotero/storage/ZZUU9YGH/S1462901122003458.html} -} - -@article{Noon2015, - title = {Analysis of Part Quality Produced by a Fused Deposition Modelling Machine : A Pragmatic Study {{Ayanna-Rene De Noon}} *, {{Fahraz Ali}}}, - author = {Noon, Ayanna-Rene De and Ali, Fahraz and Chowdary, Boppana V}, - year = {2015}, - journal = {Int. J. Rapid Manufacturing}, - volume = {5}, - number = {3/4}, - pages = {234--254}, - issn = {1757-8817}, - doi = {10.1504/IJRAPIDM.2015.074805}, - keywords = {anova,fused deposition modelling,manufacturing,process parameters}, - file = {/Users/fabio/Zotero/storage/NX74LKXE/Analysis of part quality produced by a fused (2015).pdf} -} - -@article{Nordin2017, - title = {Advances in {{High Temperature Materials}} for {{Additive Manufacturing}}}, - author = {Nordin, Nurul Amira Binti and Johar, Muhammad Akmal Bin and Ibrahim, Mohd Halim Irwan Bin and bin Marwah, Omar Mohd Faizan}, - year = {2017}, - month = aug, - journal = {IOP Conference Series: Materials Science and Engineering}, - volume = {226}, - pages = {012176}, - issn = {1757-8981}, - doi = {10.1088/1757-899X/226/1/012176} -} - -@article{Nosek2012, - title = {Scientific {{Utopia}}: {{I}}. {{Opening Scientific Communication}}}, - author = {Nosek, Brian A. and {Bar-Anan}, Yoav}, - year = {2012}, - month = jul, - journal = {Psychological Inquiry}, - volume = {23}, - number = {3}, - eprint = {1205.1055}, - pages = {217--243}, - issn = {1047840X}, - doi = {10.1080/1047840X.2012.692215}, - urldate = {2020-03-27}, - abstract = {Existing norms for scientific communication are rooted in anachronistic practices of bygone eras making them needlessly inefficient. We outline a path that moves away from the existing model of scientific communication to improve the efficiency in meeting the purpose of public science-knowledge accumulation. We call for six changes: (a) full embrace of digital communication; (b) open access to all published research; (c) disentangling publication from evaluation; (d) breaking the "one article, one journal" model with a grading system for evaluation and diversified dissemination outlets; (e) publishing peer review; and (f) allowing open, continuous peer review. We address conceptual and practical barriers to change and provide examples showing how the suggested practices are being used already. The critical barriers to change are not technical or financial; they are social. Although scientists guard the status quo, they also have the power to change it. \textcopyright{} 2012 Copyright Taylor and Francis Group, LLC.}, - archiveprefix = {arxiv} -} - -@article{Nosek2012a, - title = {Scientific {{Utopia}}: {{II}}. {{Restructuring Incentives}} and {{Practices}} to {{Promote Truth Over Publishability}}}, - author = {Nosek, Brian A. and Spies, Jeffrey R. and Motyl, Matt}, - year = {2012}, - journal = {Perspectives on Psychological Science}, - volume = {7}, - number = {6}, - pages = {615--631}, - issn = {17456916}, - doi = {10.1177/1745691612459058}, - urldate = {2020-03-27}, - abstract = {An academic scientist's professional success depends on publishing. Publishing norms emphasize novel, positive results. As such, disciplinary incentives encourage design, analysis, and reporting decisions that elicit positive results and ignore negative results. Prior reports demonstrate how these incentives inflate the rate of false effects in published science. When incentives favor novelty over replication, false results persist in the literature unchallenged, reducing efficiency in knowledge accumulation. Previous suggestions to address this problem are unlikely to be effective. For example, a journal of negative results publishes otherwise unpublishable reports. This enshrines the low status of the journal and its content. The persistence of false findings can be meliorated with strategies that make the fundamental but abstract accuracy motive-getting it right-competitive with the more tangible and concrete incentive-getting it published. This article develops strategies for improving scientific practices and knowledge accumulation that account for ordinary human motivations and biases. \textcopyright{} The Author(s) 2012.}, - keywords = {false positives,incentives,methodology,motivated reasoning,replication}, - file = {/Users/fabio/Zotero/storage/HCDJUJHZ/full-text.pdf} -} - -@article{Nosek2015, - title = {Promoting an Open Research Culture}, - author = {Nosek, B. A. and Alter, G. and Banks, G. C. and Borsboom, D. and Bowman, S. D. and Breckler, S. J. and Buck, S. and Chambers, C. D. and Chin, G. and Christensen, G. and Contestabile, M. and Dafoe, A. and Eich, E. and Freese, J. and Glennerster, R. and Goroff, D. and Green, D. P. and Hesse, B. and Humphreys, M. and Ishiyama, J. and Karlan, D. and Kraut, A. and Lupia, A. and Mabry, P. and Madon, T. A. and Malhotra, N. and {Mayo-Wilson}, E. and McNutt, M. and Miguel, E. and Paluck, E. Levy and Simonsohn, U. and Soderberg, C. and Spellman, B. A. and Turitto, J. and VandenBos, G. and Vazire, S. and Wagenmakers, E. J. and Wilson, R. and Yarkoni, T.}, - year = {2015}, - month = jun, - journal = {Science}, - volume = {348}, - number = {6242}, - pages = {1422--1425}, - publisher = {{American Association for the Advancement of Science}}, - issn = {10959203}, - doi = {10.1126/science.aab2374}, - urldate = {2020-03-27}, - file = {/Users/fabio/Zotero/storage/2FLFN9LA/full-text.pdf} -} - -@article{noticeHorizon2020Work2019, - title = {Horizon 2020 {{Work Programme}} 2018-2020 5 . Ii . {{Nanotechnologies}} , {{Advanced Materials}} , {{Biotechnology}} and {{Advanced Manufacturing}} and {{Processing}}}, - author = {Notice, Important and This, O N and Programme, Work}, - year = {2019}, - volume = {2019}, - number = {July 2018} -} - -@inproceedings{Novakova-Marcincinova2012, - title = {Special Materials Used in {{FDM}} Rapid Prototyping Technology Application}, - booktitle = {2012 {{IEEE}} 16th {{International Conference}} on {{Intelligent Engineering Systems}} ({{INES}})}, - author = {{Novakova-Marcincinova}, L. and {Novak-Marcincin}, J. and Barna, J. and Torok, J.}, - year = {2012}, - month = jun, - pages = {73--76}, - publisher = {{IEEE}}, - doi = {10.1109/INES.2012.6249805}, - urldate = {2014-07-07}, - isbn = {978-1-4673-2695-7}, - file = {/Users/fabio/Zotero/storage/Y78D6FZA/Special materials used in FDM rapid prototyping technology application.pdf} -} - -@article{Novakova-marcincinova2012a, - title = {Basic and {{Advanced Materials}} for {{Fused Deposition Modeling Rapid Prototyping Technology}}}, - author = {{Novakova-marcincinova}, Ludmila and Kuric, Ivan}, - year = {2012}, - journal = {Manufacturing and Industrial Engineering}, - volume = {11}, - number = {1}, - pages = {24--27}, - keywords = {fusedc deposition modeling,rapid prototyping,rp materials}, - file = {/Users/fabio/Zotero/storage/FCIT93W4/Basic and Advanced Materials for Fused Deposition Modeling Rapid Prototyping Technology.pdf} -} - -@article{Novokava-Marcincinova2012, - title = {Testing of {{Materials}} for {{Rapid Prototyping Fused Deposition Modelling Technology}}}, - author = {{Novokava-Marcincinova}, L. and {Novak-Marcincin}, J.}, - year = {2012}, - journal = {World Academy of Science, Engineering and Technology}, - volume = {70}, - pages = {411--414}, - keywords = {materials,rapid prototyping,testing of materials}, - file = {/Users/fabio/Zotero/storage/5CGU9XAZ/Testing of Materials for Rapid Prototyping Fused Deposition Modelling Technology.pdf} -} - -@article{Nowacki2020, - title = {Ambidexterity in Government: {{The}} Influence of Different Types of Legitimacy on Innovation}, - author = {Nowacki, Caroline and Monk, Ashby}, - year = {2020}, - month = feb, - journal = {Research Policy}, - volume = {49}, - number = {1}, - pages = {103840}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103840} -} - -@article{Nowakowski2020a, - ids = {Nowakowski2020}, - title = {Application of Deep Learning Object Classifier to Improve E-Waste Collection Planning}, - author = {Nowakowski, Piotr and Pamu{\l}a, Teresa}, - year = {2020}, - month = may, - journal = {Waste Management}, - volume = {109}, - pages = {1--9}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.04.041}, - urldate = {2020-05-08}, - abstract = {This study investigates an image recognition system for the identification and classification of waste electrical and electronic equipment from photos. Its main purpose is to facilitate information exchange regarding the waste to be collected from individuals or from waste collection points, thereby exploiting the wide acceptance and use of smartphones. To improve waste collection planning, individuals would photograph the waste item and upload the image to the waste collection company server, where it would be recognized and classified automatically. The proposed system can be operated on a server or through a mobile app. A novel method of classification and identification using neural networks is proposed for image analysis: a deep learning convolutional neural network (CNN) was applied to classify the type of e-waste, and a faster region-based convolutional neural network (R-CNN) was used to detect the category and size of the waste equipment in the images. The recognition and classification accuracy of the selected e-waste categories ranged from 90 to 97\%. After the size and category of the waste is automatically recognized and classified from the uploaded images, e-waste collection companies can prepare a collection plan by assigning a sufficient number of vehicles and payload capacity for a specific e-waste project.}, - keywords = {Convolutional neural network,Deep learning object classifier,E-waste,E-waste detector,Waste collection planning,Waste electrical and electronic equipment}, - file = {/Users/fabio/Zotero/storage/3Z5P3HHG/full-text.pdf} -} - -@article{ntagiosClosedloopDirectInk2023, - title = {Closed-Loop Direct Ink Extruder System with Multi-Part Materials Mixing}, - author = {Ntagios, Markellos and Nassar, Habib and Dahiya, Ravinder}, - year = {2023}, - month = feb, - journal = {Additive Manufacturing}, - volume = {64}, - pages = {103437}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2023.103437}, - urldate = {2023-02-12}, - abstract = {The field of additive manufacturing has expanded from single material-based 3D printing to multimaterial printed complex smart structures with intrinsic sensing capability. However, current multimaterial 3D printers allow printing of one material at a time, with limited ability of mixing multiple materials. Herein, we present the new 3D printer which eliminates the above shortcoming by merging the Fused Filament Fabrication and Direct Ink Write in one compact system. The developed printer expands the range of materials that can be printed and allows mixing and printing of multi-part materials with cost effective parts and increases the printing window of complex materials such as two-part rubbers. The experiments performed using various materials show the developed 3D printer having good control even at high printing speeds (up to 20~mm/s). The performance of the printer was evaluated extensively by varying different parameters such as nozzle diameter, pressure and printing speed. Finally, the capability of developed printer is demonstrated by autonomous printing of various 3D smart structures.}, - langid = {english}, - keywords = {3D printing,Additive manufacturing,Embedded systems,Multimaterial printing,Smart structures}, - file = {/Users/fabio/Zotero/storage/LZD3N3RF/Ntagios et al_2023_Closed-loop direct ink extruder system with multi-part materials mixing.pdf;/Users/fabio/Zotero/storage/WZ92Q69Q/S2214860423000507.html} -} - -@article{NTurner2014, - title = {A Review of Melt Extrusion Additive Manufacturing Processes: {{I}}. {{Process}} Design and Modeling}, - author = {N. Turner, Brian and Strong, Robert and A. Gold, Scott}, - year = {2014}, - month = apr, - journal = {Rapid Prototyping Journal}, - volume = {20}, - number = {3}, - pages = {192--204}, - issn = {1355-2546}, - doi = {10.1108/RPJ-01-2013-0012}, - urldate = {2014-10-30}, - keywords = {bead spreading,fdm,fused deposition modeling,liquefier dynamics,melt extrusion manufacturing,paper type literature review,process modeling}, - file = {/Users/fabio/Zotero/storage/37A3BXMH/A review of melt extrusion additive manufacturing processes I. Process design and modeling.pdf} -} - -@article{Nuchitprasitchai2017, - title = {Factors Effecting Real-Time Optical Monitoring of Fused Filament {{3D}} Printing}, - author = {Nuchitprasitchai, Siranee and Roggemann, Michael and Pearce, Joshua M.}, - year = {2017}, - month = sep, - journal = {Progress in Additive Manufacturing}, - volume = {2}, - number = {3}, - pages = {133--149}, - issn = {2363-9512}, - doi = {10.1007/s40964-017-0027-x} -} - -@article{Nuchitprasitchai2017a, - title = {Three {{Hundred}} and {{Sixty Degree Real-Time Monitoring}} of 3-{{D Printing Using Computer Analysis}} of {{Two Camera Views}}}, - author = {Nuchitprasitchai, Siranee and Roggemann, Michael and Pearce, Joshua}, - year = {2017}, - month = jul, - journal = {Journal of Manufacturing and Materials Processing}, - volume = {1}, - number = {1}, - pages = {2}, - issn = {2504-4494}, - doi = {10.3390/jmmp1010002} -} - -@article{Nunes2019, - title = {Cleaner {{Production}} in Small Companies: {{Proposal}} of a Management Methodology}, - author = {Nunes, Jos{\'e} Roberto Rolim and da Silva, Jo{\~a}o Eduardo Azevedo Ramos and Moris, Virg{\'i}nia Aparecida da Silva and Giannetti, Biagio Fernando}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {218}, - pages = {357--366}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.01.219} -} - -@article{nunesCitiesGoSmart2021, - title = {``{{Cities}} Go Smart!'': {{A}} System Dynamics-Based Approach to Smart City Conceptualization}, - author = {Nunes, Sim{\~a}o A.S. and Ferreira, Fernando A.F. and Govindan, Kannan and Pereira, Leandro F.}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {313}, - pages = {127683}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127683}, - urldate = {2021-06-15} -} - -@article{nur-a-tomalDirectTransformationWaste2020, - ids = {Nur-A-Tomal2020}, - title = {Direct Transformation of Waste Children's Toys to High Quality Products Using {{3D}} Printing: {{A}} Waste-to-Wealth and Sustainable Approach}, - author = {{Nur-A-Tomal}, Shahruk and Pahlevani, Farshid and Sahajwalla, Veena}, - year = {2020}, - doi = {10.1016/j.jclepro.2020.122188}, - urldate = {2020-05-26}, - abstract = {Most of post-consumer plastic toys are being ended up as waste. The waste plastic toys can pose a great risk to both people and the environment; at the same time, we will lose many valuable materials that could be recycled. The aim of the present study was to explore the possibility of producing high quality products from waste plastic toys whilst enabling waste plastics to retain their original colour profile. First, the recyclability of the waste plastic toys was investigated using a single screw extruder. The physical, chemical and mechanical properties of prepared filaments were evaluated. Repeated thermo-mechanical stresses did not alter the properties of polymers significantly until ten reprocessing cycles, which suggests that waste plastic toys can be recycled at the end of their lives. Then, the filaments produced from both waste plastic toys and virgin polymer served to fabricate products using a three-dimensional (3D) printer, to examine the possibility of producing high quality products using new manufacturing techniques. The tensile strength, elastic modulus and impact strength of the printed product were found to be 32 {$\pm$} 2 MPa, 2253 {$\pm$} 271 MPa and 40 {$\pm$} 1 kJ/m 2 , respectively. The mechanical properties of the 3D printed specimens from waste plastics were as good as virgin material. The process developed in this study can reduce carbon footprint and production cost. The utilisation of waste plastic toys as feedstock to produce new plastic products is not only an environment-friendly option but also profitable.}, - keywords = {3D printing,Acrylonitrile butadiene styrene,Children's toys,Mechanical recycling,Mechanical recycling 3D printing,Polymer,Waste plastics}, - file = {/Users/fabio/Zotero/storage/UK3LNKNI/full-text.pdf} -} - -@article{nurMoistureEffectsABS2012, - title = {Moisture Effects on the {{ABS}} Used for {{Fused Deposition Modeling Rapid Prototyping Machine}}}, - author = {Nur, Siti and Mohd, Amalina and Abdullah, Jamaluddin}, - year = {2012}, - pages = {839--843}, - isbn = {9781467313100}, - keywords = {-component,1,abs,been one of the,causes to nozzle blockage,fdm,glass transition temperature,in the fdm,moisture,nozzle blockage leads to,the,the machine,thermal analysis,very costly repairs of}, - file = {/Users/fabio/Zotero/storage/IWB5PTPR/Nur, Mohd, Abdullah - 2012 - Moisture effects on the ABS used for Fused Deposition Modeling Rapid Prototyping Machine.pdf} -} - -@article{Nuvolari2004, - title = {Collective Invention during the {{British Industrial Revolution}}: The Case of the {{Cornish}} Pumping Engine}, - author = {Nuvolari, A.}, - year = {2004}, - month = may, - journal = {Cambridge Journal of Economics}, - volume = {28}, - number = {3}, - pages = {347--363}, - issn = {0309-166X}, - doi = {10.1093/cje/28.3.347}, - urldate = {2013-10-07}, - abstract = {This paper argues that what Robert Allen has termed collective invention settings (that is, settings in which competing firms share technological knowledge) were a crucial source of innovation during the early phases of industrialisation. Until now this has been very little considered in the literature, which has focused on the patent system as the main institutional arrangement driving the rate of innovation. The paper presents one of these collective invention settings, the Cornish mining district, in detail. It studies the specific economic and technical circumstances that led to the emergence of this collective invention setting and analyses its consequences on the rate of technological innovation.} -} - -@article{Nystrom2014a, - ids = {Nystrom2014}, - title = {Actor Roles and Role Patterns Influencing Innovation in Living Labs}, - author = {Nystr{\"o}m, Anna Greta and Leminen, Seppo and Westerlund, Mika and Kortelainen, Mika}, - year = {2014}, - journal = {Industrial Marketing Management}, - volume = {43}, - number = {3}, - pages = {483--495}, - publisher = {{Elsevier Inc.}}, - issn = {00198501}, - doi = {10.1016/j.indmarman.2013.12.016}, - abstract = {Innovation networks are embodied and shaped by their participants. This paper examines actors' roles in living labs, which are defined as networks of open innovation. The study utilizes four approaches to roles: structuralist, symbolic interactionist, resource-based, and action-based approaches. Our empirical analysis of 26 living labs in four different countries identifies a number of actor roles associated with open innovation. In addition, it reveals four role patterns characteristic of living labs: (i) ambidexterity, (ii) reciprocity, (iii) temporality, and (iv) multiplicity. These patterns distinguish actor collaboration in networks characterized by heterogeneous actors, the coexistence of individual and shared motives, high degree of openness, and user involvement. Scholars and practitioners of innovation learn that understanding of role patterns in living labs can contribute to building, utilization, and orchestration of open innovation networks. \textcopyright 2013 Elsevier Inc.}, - keywords = {Innovation network,Living labs,Open innovation,Role,Role patterns} -} - -@article{oberholzerPostgrowthTransitionWorking2023, - title = {Post-Growth Transition, Working Time Reduction, and the Question of Profits}, - author = {Oberholzer, Basil}, - year = {2023}, - month = apr, - journal = {Ecological Economics}, - volume = {206}, - pages = {107748}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107748}, - urldate = {2023-02-09}, - abstract = {The ecological macroeconomics literature has developed models, which outline the transition from today's growth-dependent economies to post-growth systems where output can be stabilized to limit resource consumption while good living conditions and high employment are ensured. Working time reduction plays a pivotal role in those transitional strategies to relax the trade-off between economic growth and unemployment. This analysis contributes to the research by developing a macroeconomic model where, in contrast to the existing models, a sufficient profit rate is the precondition of any private-sector economic activity. It is shown that under such assumptions working time reduction is not enough to stabilize output but is a threat to macroeconomic stability. To make the post-growth transition successful, working time reduction must go along with supporting economic policies and macroeconomic governance including public investment, which controls the private-sector profit rate to avoid instability and unemployment.}, - langid = {english}, - keywords = {Economic growth,Post-growth,Profits,Working time reduction}, - file = {/Users/fabio/Zotero/storage/UPUY8KNP/Oberholzer - 2023 - Post-growth transition, working time reduction, an.pdf;/Users/fabio/Zotero/storage/ZQYPLAT9/S0921800923000113.html} -} - -@article{oberloierFindingIdealParameters2022, - title = {Finding {{Ideal Parameters}} for {{Recycled Material Fused Particle Fabrication-Based 3D Printing Using}} an {{Open Source Software Implementation}} of {{Particle Swarm Optimization}}}, - author = {Oberloier, Shane and Whisman, Nicholas G. and Pearce, Joshua M.}, - year = {2022}, - month = apr, - journal = {3D Printing and Additive Manufacturing}, - publisher = {{Mary Ann Liebert, Inc., publishers}}, - issn = {2329-7662}, - doi = {10.1089/3dp.2022.0012}, - urldate = {2023-03-10}, - abstract = {As additive manufacturing rapidly expands the number of materials including waste plastics and composites, there is an urgent need to reduce the experimental time needed to identify optimized printing parameters for novel materials. Computational intelligence (CI) in general and particle swarm optimization (PSO) algorithms in particular have been shown to accelerate finding optimal printing parameters. Unfortunately, the implementation of CI has been prohibitively complex for noncomputer scientists. To overcome these limitations, this article develops, tests, and validates PSO Experimenter, an easy-to-use open-source platform based around the PSO algorithm and applies it to optimizing recycled materials. Specifically, PSO Experimenter is used to find optimal printing parameters for a relatively unexplored potential distributed recycling and additive manufacturing (DRAM) material that is widely available: low-density polyethylene (LDPE). LDPE has been used to make filament, but in this study for the first time it was used in the open source fused particle fabrication/fused granular fabrication system. PSO Experimenter successfully identified functional printing parameters for this challenging-to-print waste plastic. The results indicate that PSO Experimenter can provide 97\% reduction in research time for 3D printing parameter optimization. It is concluded that the PSO Experimenter is a user-friendly and effective free software for finding ideal parameters for the burgeoning challenge of DRAM as well as a wide range of other fields and processes.}, - keywords = {fused particle fabrication,LDPE,particle swarm optimization,recycling,waste plastic}, - file = {/Users/fabio/Zotero/storage/V8CJTD48/Oberloier et al. - 2022 - Finding Ideal Parameters for Recycled Material Fus.pdf} -} - -@article{obiBibliometricAnalysisResearch2022, - title = {A Bibliometric Analysis of Research in Design for Additive Manufacturing}, - author = {Obi, Martins Ugonna and Pradel, Patrick and Sinclair, Matt and Bibb, Richard}, - year = {2022}, - month = jan, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-11-2020-0291}, - urldate = {2022-01-25}, - abstract = {The purpose of this paper is to understand how Design for Additive manufacturing Knowledge has been developing and its significance to both academia and industry.,In this paper, the authors use a bibliometric approach to analyse publications from January 2010 to December 2020 to explore the subject areas, publication outlets, most active authors, geographical distribution of scholarly outputs, collaboration and co-citations at both institutional and geographical levels and outcomes from keywords analysis.,The findings reveal that most knowledge has been developed in DfAM methods, rules and guidelines. This may suggest that designers are trying to learn new ways of harnessing the freedom offered by AM. Furthermore, more knowledge is needed to understand how to tackle the inherent limitations of AM processes. Moreover, DfAM knowledge has thus far been developed mostly by authors in a small number of institutional and geographical clusters, potentially limiting diverse perspectives and synergies from international collaboration which are essential for global knowledge development, for improvement of the quality of DfAM research and for its wider dissemination.,A concise structure of DfAM knowledge areas upon which the bibliometric analysis was conducted has been developed. Furthermore, areas where research is concentrated and those that require further knowledge development are revealed.}, - keywords = {Bibliometrics,Design for additive manufacturing (DfAM),DfAM knowledge,Scopus} -} - -@article{Oblak2016, - title = {Mechanical Properties of Extensively Recycled High Density Polyethylene}, - author = {Oblak, P. and {Gonzalez-Gutierrez}, J. and Zupan{\v c}i{\v c}, B. and Aulova, A. and Emri, I.}, - year = {2016}, - journal = {Conference Proceedings of the Society for Experimental Mechanics Series}, - volume = {7}, - pages = {203--208}, - issn = {21915652}, - doi = {10.1007/978-3-319-21762-8_24}, - abstract = {In plastics industry it is a common practice to mechanically recycle waste material arising from production. However, while plastics are mechanically recycled, their mechanical properties change. These changes may affect material processing conditions and quality of the end products; therefore they need to be quantified. In this study, mechanical recycling of high density polyethylene (HDPE) was simulated by one-hundred (100) consecutive extrusions cycles. During extrusion, processability of virgin HDPE and its recyclates was studied by recording the processing conditions, i.e. melt pressure and extrusion torque, while after preparation of the recyclates, melt flow index measurements (MFI), small amplitude oscillatory shear tests (rheological properties), and differential scanning calorimetry measurements (DSC) of thermal properties were performed. Also, mechanical properties in solid state were characterized in terms of hardness and modulus measured by nanoindentation, and finally, shear creep compliance was measured to characterize the materials' time-dependent mechanical properties and its durability in solid state. In addition, gel permeation chromatography (GPC) and solubility tests were implemented to study changes in the material structure. The results on rheological and MFI measurements indicate significant structural changes in the material that occurred during the first 30 extrusion cycles. Those changes affect material processability which is as well supported by the recorded processing pressure and torque. On the other hand, processing did not significantly affect material thermal properties. Results on hardness and modulus show deterioration of the material mechanical properties after 10th reprocessing cycle. Similarly, shear creep compliance measurements showed an unfavourable effect of mechanical recycling on the time-dependent mechanical properties, particularly after the 30th extrusion cycle. In addition, results suggested chain branching as a dominating mechanism through first 30 extrusion cycles, domination of chain scission afterwards and also presence of cross-linking after 60th extrusion cycle.}, - isbn = {9783319217611}, - keywords = {Creep compliance,Crystallinity,Hardness and modulus,High density polyethylene,Mechanical recycling}, - file = {/Users/fabio/Zotero/storage/IYB4VDG8/Oblak et al. - 2016 - Mechanical properties of extensively recycled high density polyethylene.pdf} -} - -@article{obradovicOpenInnovationManufacturing2021, - title = {Open Innovation in the Manufacturing Industry: {{A}} Review and Research Agenda}, - author = {Obradovi{\'c}, Tena and Vla{\v c}i{\'c}, Bo{\v z}idar and Dabi{\'c}, Marina}, - year = {2021}, - month = jan, - journal = {Technovation}, - pages = {102221}, - publisher = {{Elsevier Ltd}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2021.102221}, - urldate = {2021-02-14}, - abstract = {In today's competitive world, globalization touches all industries. The open innovation (OI) paradigm has garnered increasing importance in academic research and industrial applications. Considering this interest, this paper aims to synthetize up-to-date findings, outline the intellectual structure of OI within the manufacturing research domain, and suggest a future research agenda. Building upon the content analysis of 239 articles indexed in Web of Science and Scopus databases, using homogeneity analysis by means of alternating least squares (HOMALS), this study reveals the theoretical underpinnings, research trends, and methodologies of this research field. Our analysis revealed that the study of sustainability, commitment-based human resource practices, and Industry 4.0 (I40) represent important future research streams for OI in the manufacturing industry. In collaborating throughout the supply chain, manufacturing firms could minimize production waste, ensure better working conditions, and adapt business models. In the ``new normal'' posed by the COVID-19 pandemic, it is more important than ever to study the effects of managerial competencies, employee training and development, and reward systems on open cultures in manufacturing firms. This study goes on to outline research opportunities in I40, particularly regarding knowledge exchange and technology transfer among partners and OI's influence on the adoption of I40 technologies.}, - keywords = {HOMALS,Manufacturing industry,Multiple correspondence analysis,Open innovation,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/4D6BGFK8/full-text.pdf} -} - -@article{obyrneApproachJustifyingNormative2022, - title = {An {{Approach}} to {{Justifying Normative Arguments}} in {{Sustainability Science}}, with {{Insights}} from the {{Philosophy}} of {{Science}} and {{Social Theory}}}, - author = {O'Byrne, David}, - year = {2022}, - month = aug, - journal = {Challenges in Sustainability}, - volume = {10}, - number = {2}, - pages = {19--28}, - issn = {2297-6477}, - doi = {10.12924/cis2022.10020019}, - urldate = {2022-09-26}, - abstract = {In this paper, I put forward an argument that sustainability science can make objectively grounded normative claims about what courses of action society should pursue in order to achieve sustainability. From a survey of the philosophy of science, social theory and sustainability science literature, I put forward an approach to justifying these normative arguments. This approach builds on the insight that social theories are value-laden and that dominant and pervasive social practices find their justification in some social theory. The approach: (i) focuses on the analysis of concrete cases; (ii) paying attention to the social practices that produce environmental problems and the theories that support those practices; (iii) examines alternative theories, and (iv) justifies a normative position by identifying the most comprehensive theoretical understanding of the particular case. Although the approach focuses on the analysis of particular cases it does not rely on value relativism. Furthermore, while the focus is on the role of science in producing normative arguments about society's trajectory, it maintains space for the inclusion of the values of the public in environmental decision-making. However, while this approach aims to provide a rational basis to normative positions, it does not presume that this will lead to social consensus on these issues.}, - copyright = {Authors who publish with this journal agree to the following terms: Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access ).}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/9A2E8PNN/O'Byrne_2022_An Approach to Justifying Normative Arguments in Sustainability Science, with.pdf;/Users/fabio/Zotero/storage/TM72KVTU/cis-10.2.html} -} - -@article{ocallaghanHowCanInnovation2020, - title = {How Can Innovation Theories Be Applied to Water Technology Innovation?}, - author = {O'Callaghan, Paul and Adapa, Lakshmi Manjoosha and Buisman, Cees}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {276}, - pages = {122910}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2020.122910}, - urldate = {2020-08-09}, - keywords = {discontinuous innovation,disruptive innovation,innovation diffusion,radical functionality,sustaining innovation,Water innovation,water technology} -} - -@article{Oduro-Kwarteng2016, - title = {Source Separation and Recycling Potential of Municipal Solid Waste in {{Ghana}}}, - author = {{Oduro-Kwarteng}, S. and Anarfi, K. P. and Essandoh, H. M.K.}, - year = {2016}, - month = mar, - journal = {Management of Environmental Quality: An International Journal}, - volume = {27}, - number = {2}, - pages = {210--226}, - issn = {1477-7835}, - doi = {10.1108/MEQ-03-2015-0038} -} - -@book{OECD2016, - title = {{{OECD Science}}, {{Technology}} and {{Innovation Outlook}} 2016}, - author = {{OECD}}, - year = {2016}, - month = dec, - journal = {OECD Science, Technology and Innovation Outlook 2016}, - publisher = {{OECD}}, - doi = {10.1787/sti_in_outlook-2016-en}, - urldate = {2020-03-14}, - isbn = {978-92-64-26305-5} -} - -@article{Oganisjana2019a, - title = {The {{Identification}} of {{Opportunities}} for {{Innovations}} through {{Collecting Problems}} from {{Citizens}}}, - author = {Oganisjana, Karine and Kozlovskis, Konstantins}, - year = {2019}, - month = sep, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {4}, - pages = {76}, - issn = {2199-8531}, - doi = {10.3390/joitmc5040076}, - abstract = {Customer engagement in different phases of creation of new products and services is argued to be a significant success factor by some scholars and practitioners, and unnecessary\textemdash by others. The paper analyses the findings of a pilot study, conducted with the intention to see whether ordinary citizens from different countries could highlight problems which really could bring forth ideas for innovative products or services. The data were collected via electronic survey with the further qualitative content analyses of the problems that, to the respondents' minds, are worth solving. The expert group analysis of the ideas which derived from the problems was conducted to decide the feasibility of the approach, whose efficiency was concluded not to be high. Reliability and consistency of the experts' assessments were tested using statistical software SPSS 20 based on the correlation analysis of five criteria\textemdash usefulness, social impact, customer base, frequency of use, and novelty. The research revealed 16 groups of problems.} -} - -@article{oginkMechanismsOpenInnovation2022, - title = {Mechanisms in Open Innovation: {{A}} Review and Synthesis of the Literature}, - shorttitle = {Mechanisms in Open Innovation}, - author = {Ogink, Ruben H. A. J. and Goossen, Martin C. and Romme, A. Georges L. and Akkermans, Henk}, - year = {2022}, - month = sep, - journal = {Technovation}, - pages = {102621}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2022.102621}, - urldate = {2022-09-18}, - abstract = {A large body of literature explores the role of context, structure, actors, and outcomes of open innovation (OI), yet pays little attention to the mechanisms underlying these relationships. In this review paper, we synthesize the OI literature using a context-mechanism-outcome approach to identify and classify the various mechanisms observed in empirical OI studies. Our findings demonstrate that the OI literature draws on a wide variety of mechanisms originating from the fields of management, sociology, economics, and psychology. The fifteen mechanisms most frequently observed in the literature fall into four categories: governance and policies; environmental dynamics and interactions; knowledge, skills, and capabilities; and learning by doing. Moreover, by examining the levels of analysis of these mechanisms, we observe substantial differences in how these mechanisms operate at the individual, project, firm, network, and society level. Finally, we identify various avenues for future research arising from our synthesis of the literature.}, - langid = {english}, - keywords = {Generative mechanisms,Literature review,Mechanisms,Open innovation,Research agenda,Research synthesis}, - file = {/Users/fabio/Zotero/storage/TLLFDV2E/Ogink et al_2022_Mechanisms in open innovation.pdf;/Users/fabio/Zotero/storage/EGBNVJGL/S0166497222001687.html} -} - -@article{Oguchi2011, - title = {A Preliminary Categorization of End-of-Life Electrical and Electronic Equipment as Secondary Metal Resources}, - author = {Oguchi, Masahiro and Murakami, Shinsuke and Sakanakura, Hirofumi and Kida, Akiko and Kameya, Takashi}, - year = {2011}, - journal = {Waste Management}, - volume = {31}, - number = {9-10}, - pages = {2150--2160}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2011.05.009}, - urldate = {2021-01-04}, - abstract = {End-of-life electrical and electronic equipment (EEE) has recently received attention as a secondary source of metals. This study examined characteristics of end-of-life EEE as secondary metal resources to consider efficient collection and metal recovery systems according to the specific metals and types of EEE. We constructed an analogy between natural resource development and metal recovery from end-of-life EEE and found that metal content and total annual amount of metal contained in each type of end-of-life EEE should be considered in secondary resource development, as well as the collectability of the end-of-life products. We then categorized 21 EEE types into five groups and discussed their potential as secondary metal resources. Refrigerators, washing machines, air conditioners, and CRT TVs were evaluated as the most important sources of common metals, and personal computers, mobile phones, and video games were evaluated as the most important sources of precious metals. Several types of small digital equipment were also identified as important sources of precious metals; however, mid-size information and communication technology (ICT) equipment (e.g., printers and fax machines) and audio/video equipment were shown to be more important as a source of a variety of less common metals. The physical collectability of each type of EEE was roughly characterized by unit size and number of end-of-life products generated annually. Current collection systems in Japan were examined and potentially appropriate collection methods were suggested for equipment types that currently have no specific collection systems in Japan, particularly for video games, notebook computers, and mid-size ICT and audio/video equipment. \textcopyright{} 2011 Elsevier Ltd.}, - pmid = {21683566}, - keywords = {Characterization,Collectability,End-of-life electrical and electronic equipment,Metal,Secondary resource,WEEE}, - file = {/Users/fabio/Zotero/storage/FJN4R2NG/full-text.pdf} -} - -@article{ohNestingSchedulingProblems2020, - title = {Nesting and {{Scheduling Problems}} for {{Additive Manufacturing}}: {{A Taxonomy}} and {{Review}}}, - author = {Oh, Yosep and Witherell, Paul and Lu, Yan and Sprock, Timothy}, - year = {2020}, - month = aug, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101492}, - publisher = {{Elsevier BV}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101492}, - urldate = {2020-09-13} -} - -@article{ohnoDetailingEconomywideCarbon2021, - title = {Detailing the Economy-Wide Carbon Emission Reduction Potential of Post-Consumer Recycling}, - author = {Ohno, Hajime and Shigetomi, Yosuke and Chapman, Andrew and Fukushima, Yasuhiro}, - year = {2021}, - journal = {Conservation \& Recycling}, - volume = {166}, - pages = {105263}, - doi = {10.1016/j.resconrec.2020.105263}, - urldate = {2021-02-05}, - abstract = {For deep carbon emission reductions beyond decarbonization of the energy supply, among reduction streams, recycling-induced elimination of materially retained carbon (MRC) releases to the atmosphere have a great direct reduction potential. Moreover, the use of recycled materials indirectly avoids the manifestation of cradle-to-gate carbon footprints of virgin materials that would otherwise enter anthropogenic cycles. These facts have been individually revealed by preceding studies on lifecycle assessment of recycling technologies and carbon footprint accounting. However, the limited focus on specific wastes and technologies for recycling might narrow the range for the future development of recycling activities. This study comprehensively quantifies the carbon emission reduction potential of recycling activities through an input-output based material flow analysis. Here, we reveal the Japanese economy-wide potential emission savings, both direct (12.8 \texttimes{} 10 6 t-CO 2) and indirect (17.5 \texttimes{} 10 6 t-CO 2), that could have been achieved through maximal MRC recycling from households (i.e. post-consumer recycling) in 2011, outweighing potential energy recovery through waste incineration (3.1 \texttimes{} 10 6 t-CO 2). Further, we found that incineration of plastic-containing products currently not covered by recycling laws is likely to cause 3.9 \texttimes{} 10 6 t-CO 2 emission. These are first-order estimates of reduction potentials of post-consumer recycling encompassing the entire national economic structure. Energy-induced carbon emissions in recycling activities are excluded from these estimates, allowing for deduction of acceptable energy usage for recycling activities. The identified structures of direct and indirect reductions on value chains allow for efficiently directing the advancement of recycling technologies and policies toward the deep decarbonization of society.}, - keywords = {Greenhouse gas emission reduction,Input-output analysis,Material flow analysis,Materially retained carbon,Plastic products,Recycling}, - file = {/Users/fabio/Zotero/storage/N6YVG8BX/full-text.pdf} -} - -@article{Oinonen2018, - title = {In Search of Paradox Management Capability in Supplier\textendash Customer Co-Development}, - author = {Oinonen, Minna and Ritala, Paavo and Jalkala, Anne and Blomqvist, Kirsimarja}, - year = {2018}, - month = oct, - journal = {Industrial Marketing Management}, - volume = {74}, - pages = {102--114}, - issn = {00198501}, - doi = {10.1016/j.indmarman.2017.09.021} -} - -@article{Ojala2008, - title = {Recycling and {{Ambivalence}}}, - author = {Ojala, Maria}, - year = {2008}, - month = nov, - journal = {Environment and Behavior}, - volume = {40}, - number = {6}, - pages = {777--797}, - issn = {0013-9165}, - doi = {10.1177/0013916507308787} -} - -@article{Okan2019, - ids = {okan2019}, - title = {Current Approaches to Waste Polymer Utilization and Minimization: A Review}, - author = {Okan, Meltem and Aydin, Halil Murat and Barsbay, Murat}, - year = {2019}, - month = jan, - journal = {Journal of Chemical Technology \& Biotechnology}, - volume = {94}, - number = {1}, - pages = {8--21}, - publisher = {{John Wiley and Sons Ltd}}, - issn = {02682575}, - doi = {10.1002/jctb.5778}, - urldate = {2020-04-08}, - abstract = {The mass production of polymer products, in particular plastics, and their widespread use depending on the inherent advantages they have, make these materials ironically a threat to life on Earth. Polymer recycling is being considered as one of the most widely accepted remedies to the threat of growing amounts of plastic waste by both the public and scientists. In practice, recycling is associated with many difficulties, such as problems related to separation, sorting and cleaning operations, lack of fiscal subsidies, instability of selective garbage separation programs, high transport and electricity costs, etc. Still, a large section of society and the authorities agree on the necessity and importance of recycling to protect the environment, and natural habitats and resources for future generations in a balanced manner to conserve raw materials, and to reduce energy consumption, municipal solid waste production and greenhouse gas emission. The recycling effort is almost endless in itself and includes a variety of approaches such as refurbishing, mechanically reshaping, chemically treating, thermally utilizing, etc. Some novel approaches such as application in carbon capture or synthesis of carbon nanostructures from the plastic waste are among the new process technologies of recycling. From traditional and promising polymer waste utilization approaches, this review will highlight sustainable methods to reduce impacts of plastic waste on the environment. \textcopyright{} 2018 Society of Chemical Industry.}, - keywords = {environmental remediation|,process technology,recycling,sustainable processing,waste minimisation,waste treatment}, - file = {/Users/fabio/Zotero/storage/PHZ2YQ5L/full-text.pdf;/Users/fabio/Zotero/storage/Z6IRJF6U/Okan et al_2019_Current approaches to waste polymer utilization and minimization.pdf;/Users/fabio/Zotero/storage/MAVG495C/jctb.html} -} - -@article{Oke2020, - title = {Rethinking and Optimising Post-Consumer Packaging Waste: {{A}} Sentiment Analysis of Consumers' Perceptions towards the Introduction of a Deposit Refund Scheme in {{Scotland}}}, - author = {Oke, Adekunle and Osobajo, Oluyomi and Obi, Lovelin and Omotayo, Temitope}, - year = {2020}, - month = dec, - journal = {Waste Management}, - volume = {118}, - pages = {463--470}, - publisher = {{Elsevier Ltd}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.09.008}, - urldate = {2020-09-29}, - abstract = {Packaging waste production, especially single-use containers, is exerting detrimental effects on terrestrial and aquatic ecosystems, including human health. To internalise the externalities associated with single-use containers, different instruments, including a deposit refund scheme (DRS), have been operationalised in many countries. Therefore, DRS is introduced in Scotland to reduce plastic litters by increasing recycling rates and incentivising pro-environmental behavioural change. This study addresses the complexity of single-use plastic containers by analysing consumers' perceptions regarding the introduction of DRS in Scotland. Using 940 comments from the BBC ``Have Your Say'' messageboard, this study adopts sentiment analysis to understand consumers' opinions about the introduction and implementation of DRS in Scotland. Findings suggest that a UK-wide scheme that is similar in terms of operations and structure is required for DRS to be successful. While consumers' knowledge and opinions about DRS are mixed, the efficacy of DRS including its relevance is questioned and raises doubts about its contribution to sustainability. The findings imply the need for UK countries to negotiate and collaborate on appropriate and attractive interventions in addressing post-consumer single-use plastic containers. The implications of the findings for policy and practice, especially in improving the operations of DRS are further discussed.}, - keywords = {Deposit refund scheme,Plastic waste,Sentiment analysis,Sustainability}, - file = {/Users/fabio/Zotero/storage/JP4UCT2K/full-text.pdf} -} - -@article{okeDemystifyingComplexityHeterogeneity2021, - title = {Demystifying the Complexity and Heterogeneity of Recycling Behavior in Organizational Settings: {{A}} Mixed-Methods Approach}, - author = {Oke, Adekunle and McDonald, Seonaidh and {Korobilis-Magas}, Evagelos}, - year = {2021}, - month = dec, - journal = {Waste Management}, - volume = {136}, - pages = {337--347}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.10.020}, - urldate = {2021-11-30} -} - -@article{Okonta2020, - title = {Assessment of Factors Affecting Source Recycling among Metropolitan {{Johannesburg}} Residents}, - author = {Okonta, F. N. and Mohlalifi, M.}, - year = {2020}, - month = mar, - journal = {Waste Management}, - volume = {105}, - pages = {445--449}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.02.006}, - urldate = {2020-03-23}, - abstract = {Waste recycling, in particular source separation contribute significantly to the extension of landfill life and the evolution of green communities. Factors that affect participation in source waste separation amongst Metropolitans Johannesburg residents was investigated by social survey using field questionnaire data to assess socio-demographic factors and was analysed by statistical tools and behavioural constructs i.e. attitudes, subjective norms, perceived behavioural control, intentions, and situational factors. The results revealed that for graduates, source separation was driven by social responsibilities and family size while council awareness campaign, financial incentives and provision of recycling facilities are the driving force for source separation amongst respondents with matric and lower formal education. Family size and level of education are correlated to attitude with low correlations. The weak correlation was due to the perception of quality of services provided by the council. Incentives are moderators of intention of source separation but distances to buyback centre have to be carefully selected in order not to be a deterrent. Waste management agencies should accommodate the level of formal education and different family size in the formulation of source separation program.}, - keywords = {Buy back centres,Municipal waste,Separation at source,Statistical analysis,Theory of planned behaviour} -} - -@article{Okorie2021, - title = {A {{Triple Bottom Line}} Examination of {{Product Cannibalisation}} and {{Remanufacturing}}: {{A Review}} and {{Research Agenda}}}, - author = {Okorie, Okechukwu and Obi, Martins and Russell, Jennifer and Charnley, Fiona and Salonitis, Konstantinos}, - year = {2021}, - month = feb, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {958--974}, - publisher = {{Elsevier BV}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.02.013}, - urldate = {2021-02-28} -} - -@article{Oksanen2013, - title = {Physical Environment as a Source for Innovation: Investigating the Attributes of Innovative Space}, - author = {Oksanen, Kaisa and St{\aa}hle, Pirjo}, - year = {2013}, - journal = {Journal of Knowledge Management}, - volume = {17}, - number = {6}, - pages = {815--827}, - issn = {1367-3270}, - doi = {10.1108/JKM-04-2013-0136}, - abstract = {DDD Purpose \textendash{} The purpose of this paper is to investigate how physical spaces intersect with innovation and innovativeness, and what the most relevant attributes of physical space are for innovation. Design/methodology/approach \textendash{} The paper reflects the changing nature of innovation, from technological advancements to services and meaning changes, and argues that the development of innovative spaces similarly embodies a diverse set of values such as collaboration, openness, and sustainability. Using a literature review, interviews, and benchmarking data, the paper examines the relationship between physical environment and innovation. Findings \textendash{} The findings from both the literature review and the interviews underline innovation as a communicative and human-centred process. As a result five attributes of innovative space are presented: collaboration enabling, modifiability, smartness, attractiveness, and value reflecting. Originality/value \textendash{} The results provide perspectives to the challenge of how to support innovation creation by developing physical spaces. The paper adds to the conceptual development of innovative space and outlines physical space as an innovative service.}, - isbn = {JKM-04-2013-0136.pdf} -} - -@article{Oladele-emmanuel2017, - title = {Encouraging {{Endogenous Innovation Cycle}} through {{Value Co- Creation}} and {{Encouraging Endogenous Innovation Cycle}} through {{Value Co- Creation}} and {{Radical Openness}}}, - author = {{Oladele-emmanuel}, Babasile D}, - year = {2017}, - number = {May 2016}, - file = {/Users/fabio/Zotero/storage/QEX4BESF/Encouraging Endogenous Innovation Cycle through Value Co-CreationandRadical Openness.pdf} -} - -@article{olanrewajuWasteMinimisationStrategies2020, - title = {Waste Minimisation Strategies at the Design Phase: {{Architects}}' Response}, - author = {Olanrewaju, Saidat Damola and Ogunmakinde, Olabode Emmanuel}, - year = {2020}, - month = dec, - journal = {Waste Management}, - volume = {118}, - pages = {323--330}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.08.045}, - urldate = {2020-09-12} -} - -@article{olatayoPlasticValueChain, - title = {Plastic Value Chain and Performance Metric Framework for Optimal Recycling}, - author = {Olatayo, Kunle Ibukun and Mativenga, Paul T. and Marnewick, Annliz{\'e} L.}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13384}, - urldate = {2023-02-09}, - abstract = {Despite the promotion of plastic recycling to sustainably manage plastic waste and advance the circular economy, existing plastic recycling systems globally are largely experiencing low performance and growth. To transition to world-class plastic material recycling and circularity, defining the metrics that impact the performance of a plastic recycling system is crucial. Bringing together existing literature, this study developed a conceptual framework, comprised of eight key performance metrics, for benchmarking recycling success or assessing the degree to which the performance of any plastic recycling system is optimal. Through a value chain approach, the specific performance metrics relevant to each stage of the plastic recycling system, their objectives, and the actors characterizing the system were analyzed in detail. Also, specific maturity models were developed to measure the performance of any plastic recycling system. This framework provides essential knowledge for related stakeholders to inform further development of plastic recycling and a circular economy.}, - copyright = {\textcopyright{} 2023 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of International Society for Industrial Ecology.}, - langid = {english}, - keywords = {circular economy,industrial ecology,maturity model,performance metric framework,plastic recycling,value chain}, - file = {/Users/fabio/Zotero/storage/K7XM9R98/Olatayo et al. - Plastic value chain and performance metric framewo.pdf;/Users/fabio/Zotero/storage/XJT4F7KS/jiec.html} -} - -@article{Olay-Romero2020, - title = {Technical Indicators to Improve Municipal Solid Waste Management in Developing Countries: {{A}} Case in {{Mexico}}}, - author = {{Olay-Romero}, Elvira and {Turcott-Cervantes}, Dolores Elizabeth and {Hern{\'a}ndez-Berriel}, Mar{\'i}a del Consuelo and {Lobo-Garc{\'i}a de Cort{\'a}zar}, Amaya and {Cuartas-Hern{\'a}ndez}, Miguel and {de la Rosa-G{\'o}mez}, Isa{\'i}as}, - year = {2020}, - month = apr, - journal = {Waste Management}, - volume = {107}, - pages = {201--210}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.03.039}, - urldate = {2020-05-11}, - abstract = {Nowadays, increasingly complex sets of indicators are used to compare and diagnose municipal solid waste management (MSWM). These sets incorporate new priorities regarding sustainability and focus on measuring the progress to zero waste. Nevertheless, in developing countries, where MSWM is still striving to protect health from the potential impacts of waste, the MSWM information available is scarce and of low quality. This work proposes a basic set of indicators for analyzing technical aspects of street cleaning, waste collection and disposal in such contexts. Based on the assessment of 66 Mexican municipalities, ten indicators were identified that can be calculated with the information available. For each indicator, reference values were established, and their performance was evaluated by means of a traffic light system. In addition, a method that allows the quality of the information to be classified into four levels according to the data source, its uncertainty, the temporal coverage, and its spatial coverage was applied. The results obtained revealed an incipient implementation of MSWM and highlighted the need to increase the coverage of the collection services and to improve the conditions of the disposal sites in most of the municipalities that were studied. The proposed set of indicators can be used as a starting point to systematize the monitoring and detection of areas of improvement in the MSWM of the municipalities studied, as well as in other systems in similar contexts.}, - keywords = {Collection level,Disposal types,Efficiency of the MSWM,Information quality,Reference values} -} - -@article{Olechowski2015, - title = {Technology Readiness Levels at 40: {{A}} Study of State-of-the-Art Use, Challenges, and Opportunities}, - author = {Olechowski, Alison and Eppinger, Steven D. and Joglekar, Nitin}, - year = {2015}, - journal = {Portland International Conference on Management of Engineering and Technology}, - volume = {2015-Septe}, - pages = {2084--2094}, - publisher = {{Portland International Conference on Management of}}, - doi = {10.1109/PICMET.2015.7273196}, - abstract = {The technology readiness level (TRL) scale was introduced by NASA in the 1970s as a tool for assessing the maturity of technologies during complex system development. TRL data have been used to make multi-million dollar technology management decisions in programs such as NASA's Mars Curiosity Rover. This scale is now a de facto standard used for technology assessment and oversight in many industries, from power systems to consumer electronics. Low TRLs have been associated with significantly reduced timeliness and increased costs across a portfolio of US Department of Defense programs. However, anecdotal evidence raises concerns about many of the practices related to TRLs. We study TRL implementations based on semi-structured interviews with employees from seven different organizations and examine documentation collected from industry standards and organizational guidelines related to technology development and demonstration. Our findings consist of 15 challenges observed in TRL implementations that fall into three different categories: system complexity, planning and review, and validity of assessment. We explore research opportunities for these challenges and posit that addressing these opportunities, either singly or in groups, could improve decision processes and performance outcomes in complex engineering projects.}, - isbn = {9781890843328}, - file = {/Users/fabio/Zotero/storage/XHRADQ46/Technology readiness levels at 40- A study of state-of-the-art use, challenges, and opportunities.pdf} -} - -@article{Olechowski2020, - title = {Technology Readiness Levels: {{Shortcomings}} and Improvement Opportunities}, - author = {Olechowski, Alison L. and Eppinger, Steven D. and Joglekar, Nitin and Tomaschek, Katharina}, - year = {2020}, - journal = {Systems Engineering}, - volume = {23}, - number = {4}, - pages = {395--408}, - issn = {15206858}, - doi = {10.1002/sys.21533}, - abstract = {The technology readiness level (TRL) scale was developed at the National Aeronautics and Space Administration (NASA) in the 1970s as a standardized technology maturity assessment tool for use in complex system development. Today, TRL assessments are used to make multimillion-dollar decisions at NASA and beyond, yet anecdotal evidence suggests that there are challenges associated with TRL use in practice. In this paper, we systematically uncover the practitioners' view, first via 19 interviews with employees from seven organizations. We identify 15 challenges of TRL implementations in three categories: system complexity, planning and review, and validity of assessment. Next, we prioritize these challenges via a survey of TRL practitioners, using a best-worst choice experiment. Finally, we identify best practices and proposed extensions to address the challenges. We find that system complexity challenges are most critical to TRL users, despite being addressed in the literature. We posit that addressing these opportunities could result in substantial improvements to decision processes and outcomes in complex engineering~projects.}, - keywords = {technology assessment,technology maturity,technology readiness level}, - file = {/Users/fabio/Zotero/storage/CHLLRQ3I/Technology readiness levels- Shortcomings and improvement opportunities.pdf} -} - -@article{Olesik2019, - title = {The Use of Shredded Car Windscreen Waste as Reinforcement of Thermoplastic Composites for {{3D}} ({{FDM}}) Printing}, - author = {Olesik, Piotr and Kozio{\l}, Mateusz and Konik, Daria and Ja{\l}a, Jakub}, - year = {2019}, - journal = {Composites Theory and Practice}, - volume = {R. 19, nr}, - pages = {30--33}, - issn = {2084-6096}, - keywords = {3D printing,car windscreen glass,druk 3D,FDM technique,low density polyethylene,polietylen niskiej g\k{e}sto\'sci,recycling,recykling,szk\l o z szyb samochodowych,technika FDM}, - file = {/Users/fabio/Zotero/storage/ZMMEEQU5/THE USE OF SHREDDED CAR WINDSCREEN WASTE AS REINFORCEMENT OF THERMOPLASTIC COMPOSITES FOR 3D (FDM) PRINTING.pdf} -} - -@inproceedings{Oliveira2011a, - title = {European Perspective on {{User-Driven}} Innovation ({{Living Lab}})}, - booktitle = {In {{Living Labs Seminar}}}, - author = {Oliveira, A}, - year = {2011}, - address = {{Helsinki, Finland}} -} - -@article{oliveiraAreEcosystemServices2019, - title = {Are Ecosystem Services Provided by Insects ``Bugged'' by Micro (Nano)Plastics?}, - author = {Oliveira, Miguel and Ameixa, Olga M.C.C. and Soares, Amadeu M.V.M.}, - year = {2019}, - month = apr, - journal = {TrAC Trends in Analytical Chemistry}, - volume = {113}, - pages = {317--320}, - publisher = {{Elsevier}}, - issn = {0165-9936}, - doi = {10.1016/J.TRAC.2019.02.018}, - urldate = {2022-01-13}, - abstract = {Although the study of the effects of microplastics increased in the last years, terrestrial ecosystems remain less studied. In fact, the effects of microplastics in insects, the most abundant group of animals and major providers of key Ecosystem Services, are not well known despite the potential cascading negative effects on the ecosystems functioning in the habitats where they occur. In this paper, a revision on available studies on microplastics contamination is provided and potential consequences to major Ecosystem Services provided by insects are discussed, using the Common International Classification of Ecosystem Services (CICES) methodology. The revision underpinned probable and potential impacts for all tree CICES divisions, i.e.: Provision, Regulation and Maintenance and Cultural Services. The available studies seem to show that different groups react differently to microplastics contamination, which clearly indicates that the effects in Ecosystem Services provided by insects need a more empirical and targeted approach.}, - keywords = {CICES,Ecological function,Ecosystem services,Insects,Microplastics}, - file = {/Users/fabio/Zotero/storage/HVULL835/full-text.pdf} -} - -@article{oliveiraEnvironmentalAssessmentDiscarded2022, - title = {Environmental Assessment of Discarded Plastic Caps as a Honeycomb Core: {{An}} Eco-Mechanical Perspective}, - author = {Oliveira, Pablo Resende and Kilchert, Sebastian and May, Michael and Panzera, Tulio Hallak and Scarpa, Fabrizio and Hiermaier, Stefan}, - year = {2022}, - month = apr, - journal = {Journal of Industrial Ecology}, - volume = {26}, - number = {2}, - pages = {643--654}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13211}, - urldate = {2022-04-12}, - abstract = {The extensive disposal of plastic components into the environment requires an economically and ecologically feasible solution for the proper treatment or new uses for plastic waste. This study compares the environmental and mechanical performance of a sandwich panel based on disposed bottle caps core with different eco-friendly skins and adhesive. A cradle-to-gate life cycle assessment compares the environmental impacts of the manufacture of six-bottle cap panel designs with various skin (aluminum, recycled PET, and flax laminates) and adhesive types (epoxy vs. biopolymer) by calculating their ReCiPe midpoint impact indicators. An eco-mechanical indicator is additionally proposed to measure the efficiency of designs with greater strength/stiffness and less environmental footprint. The bio-based skin on the sandwich panel significantly reduces environmental damage between 32\% and 87\% compared to metallic skins. Recycled skin promotes the lowest impacts, while considerably reducing mechanical performance. The bio-based adhesive has emissions up to 15\% lower than epoxy. The eco-mechanical balance showed up to 630\% higher efficiency for bottle cap panel designs based on bio-based polymer, flax-based skins, and/or less adhesive depending on the mechanical response. Promising environmental performance with superior mechanical strength highlights the potential of bottle caps as an eco-friendly honeycomb for secondary construction and transport structures.}, - keywords = {bottle cap,design,eco,industrial ecology,life cycle assessment,mechanical index,sandwich panel}, - file = {/Users/fabio/Zotero/storage/8BDREVM2/full-text.pdf} -} - -@article{oliveiravalerioOverviewTechnologyRoadmapping2020, - title = {Overview on the Technology Roadmapping ({{TRM}}) Literature: Gaps and Perspectives}, - author = {de Oliveira Val{\'e}rio, Karollay Giuliani and {Sanches da Silva}, Carlos Eduardo and Neves, Sandra Miranda}, - year = {2020}, - journal = {Technology Analysis and Strategic Management}, - pages = {1--12}, - publisher = {{Routledge}}, - issn = {14653990}, - doi = {10.1080/09537325.2020.1787976}, - urldate = {2020-07-20}, - abstract = {The identification of technologies and innovations through their correct interpretation and development provide organisational success. This study aimed to identify gaps and perspectives in the literature on technology roadmapping (TRM), using bibliometrics as a method. The analysis tools were Citespace and VOS Viewer, which allowed a comparative evaluation of the articles. Gaps were identified regarding initiatives to promote innovation and strategy, improvements in approaches to TRM, including integration with new techniques and the development of new scenarios. As for perspectives, research trends were identified, such as new perspectives related to TRM, together with the new forms of management. The research proposes new strategies and perspectives for the development of TRM and shows their importance for the academic and practical spheres, demonstrating that the themes and trends found are complementary and important in the current technological and organisational sector.}, - keywords = {bibliometric analysis,Gaps and perspectives,technology roadmapping} -} - -@article{olkHowPaySaving2023, - title = {How to Pay for Saving the World: {{Modern Monetary Theory}} for a Degrowth Transition}, - shorttitle = {How to Pay for Saving the World}, - author = {Olk, Christopher and Schneider, Colleen and Hickel, Jason}, - year = {2023}, - month = dec, - journal = {Ecological Economics}, - volume = {214}, - pages = {107968}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107968}, - urldate = {2023-08-31}, - abstract = {Degrowth lacks a theory of how the state can finance ambitious social-ecological policies and public provisioning systems while maintaining macroeconomic stability during a reduction of economic activity. Addressing this question, we present a synthesis of degrowth scholarship and Modern Monetary Theory (MMT) rooted in their shared understanding of money as a public good and their common opposition to artificial scarcity. We present two arguments. First, we draw on MMT to argue that states with sufficient monetary sovereignty face no obstacle to funding the policies necessary for a just and sustainable degrowth transition. Increased public spending neither requires nor implies GDP growth. Second, we draw on degrowth research to bring MMT in line with ecological reality. MMT posits that fiscal spending is limited only by inflation, and thus the productive capacity of the economy. We argue that efforts to deal with this constraint must also pay attention to social and ecological limits. Based on this synthesis we propose a set of monetary and fiscal policies suitable for a stable degrowth transition, including a stronger regulation of private finance, tax reforms, price controls, public provisioning systems and an emancipatory job guarantee. This approach can support broad democratic mobilization for a degrowth transition.}, - keywords = {Degrowth,Ecological macroeconomics,Fiscal policy,Job guarantee,Modern Monetary Theory,Universal public services}, - file = {/Users/fabio/Zotero/storage/6CFSZJUN/S0921800923002318.html} -} - -@article{Olson2013, - title = {3-{{D Printing}}: {{A}} Boon or a {{Bane}}?}, - author = {Olson, R}, - year = {2013}, - journal = {The Environmental Forum}, - volume = {30}, - number = {6}, - file = {/Users/fabio/Zotero/storage/Q3LGHY9V/3-D Printing A boon or a Bane.pdf} -} - -@article{Olukanni2018, - title = {Recycling and Reuse Technology: {{Waste}} to Wealth Initiative in a Private Tertiary Institution, {{Nigeria}}}, - author = {Olukanni, David O. and Aipoh, Anne O. and Kalabo, Inibraniye H.}, - year = {2018}, - month = sep, - journal = {Recycling}, - volume = {3}, - number = {3}, - pages = {44}, - publisher = {{MDPI AG}}, - issn = {23134321}, - doi = {10.3390/recycling3030044}, - urldate = {2020-03-12}, - abstract = {The practice of collecting, treating, and managing solid waste prior to disposal has become a necessity in developing and modern societies. However, over the years, most waste has become regarded as having second-rate value and could be recovered and reused for valuable goods. However, the construction costs for conventional Material Recovery Facility(s) (MRFs) have been a major barrier for its implementation, and these technologies also require considerable technical expertise, which is not often available in developing nations for the successful operation of the MRFs. Covenant University, a private mission institution undertaking a waste-to-wealth scheme, is focused on managing and processing used materials to create reusable products. Such materials included PET bottles, paper waste, food waste from cafeterias, plastic food packs, nylon, tin cans, and others. Specific areas from the university which were chosen for the survey included the residential areas for staff and students and the two cafeterias. The waste generated was characterized so as to quantify the amount of recyclable waste generated, and also to find out which was most-occurring. The survey involved the use of structured questionnaires, on-site observations, and measurements. The study revealed that the average amount of recyclable waste generated per day in the institution were 55.56\% food waste, 13.46\% PET bottles, 12.64\% other plastic, 9.63\% nylon, 4.68\% tin cans, and 4.03\% paper. The study establishes that adequate waste characterization is a requirement for effective integrated solid waste management, which would boost resource recovery, reuse, and recycling.}, - keywords = {Municipal solid waste,Recycling,Reuse,Sustainable technology,Waste management,Waste to wealth}, - file = {/Users/fabio/Zotero/storage/HV2VDA7U/full-text.pdf} -} - -@article{ONeill2017, - title = {Seeing Complexity: Visualization Tools in Global Environmental Politics and Governance}, - author = {O'Neill, Kate and Weinthal, Erika and Hunnicutt, Patrick}, - year = {2017}, - journal = {Journal of Environmental Studies and Sciences}, - volume = {7}, - number = {4}, - pages = {490--506}, - publisher = {{Journal of Environmental Studies and Sciences}}, - issn = {21906491}, - doi = {10.1007/s13412-017-0433-x}, - abstract = {Can visualization tools and applications help scholars of global environmental politics and governance understand problems that are complex, linked, and cross-scalar\textemdash the critical characteristics of contemporary environmental problems? Surprisingly, such tools have been rarely used in this literature despite widespread availability and use in other fields to make sense of complex data. We trace the history of visualizations from the early work of Minard and Snow up to the sophisticated, web-based interactive graphics we have today, and identify forms of visualization and their uses. We apply these tools to a specific preliminary case study: the number, location, and timeline of waste disposal projects in developing countries registered with the Clean Development Mechanism as climate offsets. This preliminary case gets at unexpected linkages across climate and waste governance at the international level, and allows us to start to see local impacts of global mitigation and market mechanisms. Using Tableau, we have generated a series of maps and other visualizations that make trends and patterns visible\textemdash helping to spark further research. We conclude by discussing the implications of visualization tools for fields of global environmental politics and governance, and critiques of visualization from practical and theoretical viewpoints. We note their connection to wider political debates around accessibility of data and science.}, - keywords = {Clean development mechanism,Global environmental politics,Methodology,Tableau,Visualization,Waste}, - file = {/Users/fabio/Zotero/storage/2YM6GPRJ/Seeing complexity- visualization tools in global environmental politics and governance.pdf} -} - -@article{ONeill2018, - ids = {oneill2018}, - title = {A Good Life for All within Planetary Boundaries}, - author = {O'Neill, Daniel W. and Fanning, Andrew L. and Lamb, William F. and Steinberger, Julia K.}, - year = {2018}, - journal = {Nature Sustainability}, - volume = {1}, - number = {2}, - pages = {88--95}, - publisher = {{Springer US}}, - issn = {23989629}, - doi = {10.1038/s41893-018-0021-4}, - abstract = {Humanity faces the challenge of how to achieve a high quality of life for over 7 billion people without destabilizing critical planetary processes. Using indicators designed to measure a 'safe and just' development space, we quantify the resource use associated with meeting basic human needs, and compare this to downscaled planetary boundaries for over 150 nations. We find that no country meets basic needs for its citizens at a globally sustainable level of resource use. Physical needs such as nutrition, sanitation, access to electricity and the elimination of extreme poverty could likely be met for all people without transgressing planetary boundaries. However, the universal achievement of more qualitative goals (for example, high life satisfaction) would require a level of resource use that is 2-6 times the sustainable level, based on current relationships. Strategies to improve physical and social provisioning systems, with a focus on sufficiency and equity, have the potential to move nations towards sustainability, but the challenge remains substantial.}, - file = {/Users/fabio/Zotero/storage/FWW55VRR/ planetary-boundaries.pdf;/Users/fabio/Zotero/storage/RYCYJI63/full-text.pdf} -} - -@inproceedings{ongRecyclingPolylacticAcid2020, - title = {Recycling of Polylactic Acid (Pla) Wastes from 3d Printing Laboratory}, - booktitle = {Lecture {{Notes}} in {{Mechanical Engineering}}}, - author = {Ong, Thai Kiat and Choo, Hui Leng and Choo, Wei Jean and Koay, Seong Chun and Pang, Ming Meng}, - year = {2020}, - pages = {725--732}, - publisher = {{Springer Science and Business Media Deutschland GmbH}}, - issn = {21954364}, - doi = {10.1007/978-981-15-5753-8_67}, - urldate = {2021-02-16}, - abstract = {Material extrusion process, or commonly known as fused deposition modelling (FDM), is the most popular additive manufacturing process to date. Most universities use this technique along with PLA and ABS as the main materials for prototyping. A lot of wastes are generated in this process from support structures and scrapped parts, but they are not usually recycled indoor. Most commonly, these materials are thrown away as landfill. Therefore, the aim of this research was to investigate in-house recycling of PLA wastes using a standard desktop filament extruder. A total of two cycles were carried out (Cycle 0 being the new filament, Cycle 1 and Cycle 2). Mechanical properties, thermal properties and melt flow rate (MFR) were tested on the obtained samples at each cycle. After one recycling (Cycle 1), mechanical properties reduced drastically. This was attributed to hydrolytic degradation which is shown through an increase in MFR and percentage crystallinity. Increasing MFR can be attributed to the reduction in PLA molecular weight. Besides degradation, there were some extrusion and printing issues, which were magnified during Cycle 2. The clogging of extrusion nozzle was due to impurities as no filtering was used during extrusion. Overall, it can be concluded that in-house recycling is feasible, but it should be done with care as the resulting material has reduced mechanical properties.}, - isbn = {9789811557521}, - keywords = {Additive manufacturing,Fused deposition modelling,Mechanical properties,Polylactic acid,Recycling,Thermal properties} -} - -@article{Ordonez2015, - title = {Waste Sorting in Apartments: {{Integrating}} the Perspective of the User}, - author = {Ordo{\~n}ez, Isabel and Harder, Robin and Nikitas, Alexandros and Rahe, Ulrike}, - year = {2015}, - journal = {Journal of Cleaner Production}, - volume = {106}, - pages = {669--679}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2014.09.100}, - abstract = {In order to increase resource recovery from solid waste, better sorting of household waste is needed. This article reports on a case study about waste sorting infrastructure performance carried out in two buildings in Gothenburg, Sweden. Results from the study reveal mismatches between users' needs and what the system offers, affecting the sorting rates and quality of the sorted material. Frequent sorting errors were observed from the tenants in these apartment buildings, where more than 70\% of the discards that go in the mixed waste could be sorted out into other available fractions, with biodegradable waste being the most neglected. Hazardous waste was often discarded wrongly and recurrent errors were observed in the containers available for sorting different packaging material. Given the performance observed, initial suggestions are made for housing companies to rethink the sorting system they offer to their tenants (i.e. accessible space for electronic waste, more space for biodegradable waste, possibility of sorting textiles, etc.). Most importantly this paper makes the case that housing companies have the opportunity to provide sorting infrastructure that is designed for the user, rather than just fitted to the waste management system.}, - keywords = {Apartment buildings,Household waste,Sorting behavior,Sustainable waste handling,User perspective,Waste composition analysis}, - file = {/Users/fabio/Zotero/storage/6IFVM8A9/Waste sorting in apartments Integrating the perspective of the user.pdf} -} - -@article{orloveClimateDecisionMaking2020, - title = {Climate {{Decision-Making}}}, - author = {Orlove, Ben and Shwom, Rachael and Markowitz, Ezra and Cheong, So-Min}, - year = {2020}, - month = oct, - journal = {Annual Review of Environment and Resources}, - volume = {45}, - number = {1}, - publisher = {{Annual Reviews}}, - issn = {1543-5938}, - doi = {10.1146/annurev-environ-012320-085130}, - urldate = {2020-10-28}, - abstract = {Climate change decision-making has emerged in recent decades as an area of research and practice, expanding on an earlier focus on climate policy. Defined as the study of decisions relevant for climate change, it draws on developments in decision science, particularly advances in the study of cognitive and deliberative processes in individuals and organizations. The effects of climate, economic, social, and other framings on decision-making have been studied, often showing that nonclimate frames can be as effective, or more effective, than climate frames in promoting decision-making and action. The concept of urgency, linked to the ideas of climate crisis and climate emergency, has taken on importance in recent years. Research on climate decision-making has influenced numerous areas of climate action, including nudges and other behavioral interventions, corporate social responsibility, and Indigenous decision-making. Areas of transformational change, such as strategic retreat in the face of sea-level rise, are emerging.Expected final online publication date for the Annual Review of Environment and Resources, Volume 45 is October 19, 2020. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.}, - keywords = {CCRD,climate change,climate change-relevant decisions,climate communication,climate crisis,framing,Indigenous,spillover,transformation,urgency}, - file = {/Users/fabio/Zotero/storage/UQD4XGBL/full-text.pdf} -} - -@article{Oropallo2016, - title = {Ten Challenges in {{3D}} Printing}, - author = {Oropallo, William and Piegl, Les A.}, - year = {2016}, - journal = {Engineering with Computers}, - volume = {32}, - number = {1}, - pages = {135--148}, - publisher = {{Springer London}}, - issn = {14355663}, - doi = {10.1007/s00366-015-0407-0}, - abstract = {Three dimensional printing has gained consid- erable interest lately due to the proliferation of inexpensive devices as well as open source software that drive those devices. Public interest is often followed by media cover- age that tends to sensationalize technology. Based on popu- lar articles, the public may create the impression that 3D printing is the Holy Grail; we are going to print everything as one piece, traditional manufacturing is at the brink of collapse, and exotic applications, such as cloning a human body by 3D bio-printing, are just around the corner. The purpose of this paper is to paint a more realistic picture by identifying ten challenges that clearly illustrate the limita- tions of this technology, which makes it just as vulnerable as anything else that had been touted before as the next game changer.}, - isbn = {10.1007/s00366-015-0407-0}, - keywords = {3D printing,Additive manufacturing,Design for printing,Optimization,Part orientation}, - file = {/Users/fabio/Zotero/storage/8K96SUTU/Ten challenges in 3D printing.pdf} -} - -@article{ORourke1996, - title = {Industrial Ecology: {{A}} Critical Review}, - author = {O'Rourke, Dara and Connelly, Lloyd and Koshland, Catherine P.}, - year = {1996}, - journal = {International Journal of Environment and Pollution}, - volume = {6}, - number = {2-3}, - pages = {89--112}, - issn = {09574352}, - doi = {10.1504/IJEP.1996.037944}, - urldate = {2020-05-24}, - abstract = {Scientists, policy-makers, and the general public are becoming increasingly aware of environmental damage associated with the large and growing material through-put required in modern industrial society. One approach emerging in response to these concerns is called Industrial Ecology (IE). IE signals a shift from 'end-of-pipe' pollution control methods towards holistic strategies for prevention and planning of more environmentally sound industrial development. However, the broad umbrella of IE currently houses a diverse group of scholars, consultants, and environmentalists, who range in scope from those advocating incremental changes in existing systems, to some promoting a total transformation of industrial activity. This article presents a critical review of the existing US literature on IE. We introduce and critique IE's primary concepts, and analyse weaknesses and gaps in IE's conceptual framework. We also discuss the needs and potential for advancing IE concepts and projects in the future.}, - keywords = {Design for environment,Environmental policy,Industrial ecology} -} - -@article{orthOnthefly3DMetrology2022, - title = {On-the-Fly {{3D}} Metrology of Volumetric Additive Manufacturing}, - author = {Orth, Antony and Sampson, Kathleen L. and Zhang, Yujie and Ting, Kayley and {van Egmond}, Derek Aranguren and Laqua, Kurtis and Lacelle, Thomas and Webber, Daniel and Fatehi, Dorothy and Boisvert, Jonathan and Paquet, Chantal}, - year = {2022}, - month = aug, - journal = {Additive Manufacturing}, - volume = {56}, - pages = {102869}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102869}, - urldate = {2022-05-30} -} - -@article{ortiz-przychodzkaRethinkingEconomicPractices2023, - title = {Rethinking {{Economic Practices}} and {{Values As Assemblages}} of {{More-Than-Human Relations}}}, - author = {{Ortiz-Przychodzka}, Stefan and {Benavides-Fr{\'i}as}, Camila and Raymond, Christopher M. and {D{\'i}az-Reviriego}, Isabel and Hanspach, Jan}, - year = {2023}, - month = sep, - journal = {Ecological Economics}, - volume = {211}, - pages = {107866}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107866}, - urldate = {2023-05-11}, - abstract = {The relational turn in the academic literature on environmental values explores ontologies that rethink the dualistic, hierarchical separations of humans from nature. In particular, the consideration of a plurality of values and ways in which humans connect to nature has brought new insights on the dynamic interconnections between people, place and environmental processes, all highly relevant for the world's sustainability challenges. However, many conceptualizations of economic practices and values are still predominantly dualistic and anthropocentric. To overcome this human-nature divide we propose a conceptual integration of relational values with assemblages of more-than-human relations, illustrated with examples from the literature and ongoing empirical research. These concepts offer a way of representing meaningful and dynamic interrelationships, including humans, physical elements, materials (e.g. technologies, tools), immaterial entities (e.g. sounds, lights, colors), and other non-human beings. We argue that such conceptual integration provides a useful framework to rethink diverse economies as the processes through which humans and non-humans co-constitute their interrelated livelihoods. With this, we extend the relational turn to research on economic human-nature connections, following the call of many scholars in the field of ecological economics to unveil non-utilitarian values and consider multiple economic agencies.}, - langid = {english}, - keywords = {Commodification,Human-Nature Interrelations,Livelihoods Co-Production,More-Than-Human Agency,Ontologies}, - file = {/Users/fabio/Zotero/storage/UQGJ68MS/Ortiz-Przychodzka et al. - 2023 - Rethinking Economic Practices and Values As Assemb.pdf;/Users/fabio/Zotero/storage/VM3NFKJ3/S0921800923001295.html} -} - -@article{ortnerComputationalOptimizationCircular2022, - title = {Computational Optimization for Circular Economy Product Design}, - author = {Ortner, Peter and Tay, Jing Zhi and Wortmann, Thomas}, - year = {2022}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {132340}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.132340}, - urldate = {2022-05-28} -} - -@article{Osorio2019, - title = {Design and Management of Innovation Laboratories: {{Toward}} a Performance Assessment Tool}, - author = {Osorio, Ferney and Dupont, Laurent and Camargo, Mauricio and Palominos, Pedro and Pe{\~n}a, Jos{\'e} Ismael and Alfaro, Miguel}, - year = {2019}, - month = mar, - journal = {Creativity and Innovation Management}, - volume = {28}, - number = {1}, - pages = {82--100}, - issn = {09631690}, - doi = {10.1111/caim.12301}, - file = {/Users/fabio/Zotero/storage/6P6LNNQC/Osorio et al. - 2019 - Design and management of innovation laboratories Toward a performance assessment tool.pdf} -} - -@article{Osorio2019a, - title = {Constellation of {{Innovation Laboratories}}: {{A Scientific Outlook}}}, - author = {Osorio, Ferney and Dupont, Laurent and Camargo, Mauricio and Pena, Jose Ismael}, - year = {2019}, - journal = {Proceedings - 2019 IEEE International Conference on Engineering, Technology and Innovation, ICE/ITMC 2019}, - doi = {10.1109/ICE.2019.8792816}, - abstract = {Digital transformation and technology democratization are demanding new organisational structures led by trust, transparency and openness. For some years now, innovation laboratories have been embraced as unique and enabling environments acting as facilitators for the evolution of our communities, business and territories. However, as they are being embodied under different names and shaped by their context, they also seem to operate freely under multiple-related innovation approaches. This is leading to a grey-zone within the universe of innovation laboratories, making them difficult to study and manage. In this paper, Innovation laboratories are studied as innovation intermediaries that fulfil the purpose of creating communities of knowledge imbued with values of sharing and collaborating towards a common objective or project. Through a bibliometric study, a scientific outlook for the constellation of Innovation laboratories is built. Research affinities and distinctions between the most common concepts often related to these innovation intermediaries are discussed. And lastly, the grounds for a research agenda on the strategic management and assessment of this phenomenon are set.}, - isbn = {9781728134017}, - keywords = {bibliometric analysis,innovation intermediaries,innovation labs,strategic management}, - file = {/Users/fabio/Zotero/storage/G6M9NH6E/Osorio et al. - 2019 - Constellation of Innovation Laboratories A Scientific Outlook.pdf} -} - -@article{Osorio2020, - ids = {Osorio2020a}, - title = {Shaping a {{Public Innovation Laboratory}} in {{Bogota}}: {{Learning}} through {{Time}}, {{Space}} and {{Stakeholders}}}, - author = {Osorio, Ferney; and Dupont, Laurent; and Camargo, Mauricio; and Sandoval, Carlos; and Pe{\~n}a, Jos{\'e} Ismael}, - year = {2020}, - journal = {Journal of Innovation Economics \& Management}, - volume = {31}, - number = {1}, - pages = {69--100}, - publisher = {{De Boeck Sup\'erieur}}, - address = {{Louvain-la-Neuve}}, - doi = {10.3917/jie.pr1.0066}, - abstract = {Public and private organizations are turning to innovation labs as open spaces that provide a stimulating and collaborative environment for developing new solutions. However, sustaining an innovation lab is a challenging task that requires more than well-meant intentions. Although this issue has been of interest to scholars for some time now, little is known about how innovation labs are managed or the main factors influencing their adaptation and evolution. Building on an existing framework, this article focuses on a case study of the ViveLab Bogot\'a, an innovation lab in the Colombian public sector. The results reveal that having a clear and shared strategic intent, effective governance mechanisms, a defined financial model, continuous knowledge generation and a community-based approach, are factors that may enable or limit an innovation lab to experience a sustainable evolution. Finally, reflections are also shared on the use of the selected framework and possible points for improvement.}, - keywords = {Case Study,Colombia,Innovation Labs,Public Innovation Lab,Public Sector,Strategic Management}, - file = {/Users/fabio/Zotero/storage/624NAVP3/Shaping a Public Innovation Laboratory in Bogota- Learning through Time, Space and Stakeholders.pdf} -} - -@incollection{Ostrom2009, - title = {Polycentric Systems as One Approach to Solving Collectiveaction Problems}, - booktitle = {Climate {{Change}} and {{Sustainable Development}}: {{New Challenges}} for {{Poverty Reduction}}}, - author = {Ostrom, Elinor}, - year = {2009}, - pages = {17--35}, - doi = {10.4337/9781848449381.00010}, - urldate = {2022-04-19}, - isbn = {978-1-84844-409-6}, - file = {/Users/fabio/Zotero/storage/E9VVU4NI/full-text.pdf} -} - -@article{Osunyomi2016, - title = {Impact of the {{Fablab Ecosystem}} in the {{Sustainable Value Creation Process}}}, - author = {Osunyomi, Babasile D. and Redlich, Tobias and {Buxbaum-Conradi}, Sonja and Moritz, Manuel and Wulfsberg, Jens P.}, - year = {2016}, - journal = {International Journal of Sustainable Development}, - volume = {9}, - number = {1}, - pages = {21--36}, - abstract = {The value creation concept aims to create not just a paradigm shift in developmental strategies, but also a shift in the distribution of livelihood, thereby providing adequate means of wealth and job creation to the populace in the developed, and developing countries. In response to the need for adequate value creation, some initiatives were rolled out to tackle the urgent issue of inadequate value creation, among which is FabLab. FabLab signifies fabrication laboratory, it is a small-scale workshop equipped with flexible computer controlled tools and systems for the production of digital fabrications of widely distributed products, which are used to encourage creativity and innovation among individuals irrespective of their anthropological status.This paper provides the result of the research survey conducted to explore the tools and techniques used within the FabLab ecosystems to ensure its sustainability, analyze the growth pattern of FabLab, and finally uncover both the socio-technical and socio-economic impact of the FabLab ecosystems. A total number of 94 (N=94) respondents participated in the online survey globally. From the survey, we discovered that FabLab have been productive up to date, though the lack of a formalized operating structure and unified communication platform amongst other constraints poses as the major impediments to the full effectiveness of the initiative.}, - keywords = {Collaboration,FabLab,Innovation,Sustainability,Value creation}, - file = {/Users/fabio/Zotero/storage/E8JUGBJG/SSRN-id2733931.pdf} -} - -@book{OttawaON:Federal2017, - title = {Value of {{Nature}} to {{Canadians Study Taskforce}}. 2017. {{Completing}} and {{Using Ecosystem Service Assessment}} for {{Decision-Making}}: {{An Interdisciplinary Toolkit}} for {{Managers}} and {{Analysts}}.}, - author = {Ottawa, ON: Federal, Provincial and of Canada., {and} Territorial Governments}, - year = {2017}, - abstract = {Completing and Using Ecosystem Service Assessment for Decision-Making: An Interdisciplinary Toolkit for Managers and Analysts.}, - isbn = {978-0-660-07074-2}, - file = {/Users/fabio/Zotero/storage/BF8ER8X8/En4-295-2016-eng.pdf} -} - -@article{ottenCombiningXrayCT2012, - title = {Combining {{X-ray CT}} and {{3D}} Printing Technology to Produce Microcosms with Replicable, Complex Pore Geometries}, - author = {Otten, W. and Pajor, R. and Schmidt, S. and Baveye, P. C. and Hague, R. and Falconer, R. E.}, - year = {2012}, - journal = {Soil Biology and Biochemistry}, - volume = {51}, - number = {November}, - pages = {53--55}, - issn = {00380717}, - doi = {10.1016/j.soilbio.2012.04.008}, - abstract = {Measurements in soils have been traditionally used to demonstrate that soil architecture is one of the key drivers of soil processes. Major advances in the use of X-ray Computed Tomography (CT) afford significant insight into the pore geometry of soils, but until recently no experimental techniques were available to reproduce this complexity in microcosms. This article describes a 3D additive manufacturing technology that can print physical structures with pore geometries reflecting those of soils. The process enables printing of replicated structures, and the printing materials are suitable to study fungal growth. This technology is argued to open up a wealth of opportunities for soil biological studies. \textcopyright{} 2012 Elsevier Ltd.}, - isbn = {0038-0717} -} - -@article{ottoFoodPackagingSustainability2021, - title = {Food Packaging and Sustainability \textendash{} {{Consumer}} Perception vs. Correlated Scientific Facts: {{A}} Review}, - author = {Otto, Sarah and Strenger, Mara and {Maier-N{\"o}th}, Andrea and Schmid, Markus}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {298}, - pages = {126733}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126733}, - urldate = {2021-04-21}, - abstract = {Food packaging maintains the food safety and ensures the quality of food throughout the supply chain. Both are achieved by the protective function of the packaging against negative ambient influences such as mechanical damage, light or water vapour. Material, form and concepts of packaging vary widely, which thus also differentiates the environmental impact for packaging. This paper provides an overview of the current research of European consumer perception and how this correlates with the environmental impact of loose foodstuffs and packaged food. Considered materials are plastic, glass, metal, and paper/cardboard. These perceptions are compared to the objective environmentally friendliness based on the selected assessment criteria carbon footprint, recycling rate, reuse rate and biological degradation/decomposition in Europe. The purpose of this paper is to discover whether there is any link between the consumer perception and the scientific assessed environmental sustainability. Consumers judge packaging material by criteria of circular economy, natural looking material, and design. The environmental impact of paper/cardboard and metal are rated in line with the scientific measure by consumers, whereas plastic packaging is underestimated and glass and biodegradable plastic packaging are highly overestimated. These results indicate that the rating of European consumers and scientific life cycle assessments turn out differently. The differences are mainly linked by theoretical concepts of recyclability, biodegradability, and reuse rate of the packaging. Consumers evaluate food packaging by affective feelings than using cognitive reasoning. Their knowledge about the practical implementation of recyclability, biodegradability and reusability as well as additional environmental impact factors are low. Consequently, consumers' buying behaviour is in most cases less environmentally sustainable than intended. Awareness trainings based on scientific facts, clear product and packaging information based on labelling schemes (``eco-labelling'') and nudging for sustainable behaviour can potentially support consumers in their sustainable buying behaviour.}, - keywords = {Beverages,Consumer behaviour,Consumer perception,Environmental impact,Packaging,Sustainability} -} - -@article{overlandSustainabilityFuturesMoving2023, - title = {Sustainability and Futures, Moving beyond "{{The Natural}}" and "{{The Artificial}}"}, - author = {{\O}verland, Erik F.}, - year = {2023}, - month = mar, - journal = {Futures}, - volume = {147}, - pages = {103102}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2023.103102}, - urldate = {2023-02-12}, - abstract = {In more than 50 years the overall hegemonic concern among futurists has been climate- and environmental policy issues. These concerns are important to follow up on, but as futurists we should move beyond the current hegemony of climate- and environmental policy issues and discuss ``what could be the main topic for futurists to discuss the next 50 years?''. This paper aims at giving a brief presentation of the core ideas of Sustainability and the Anthropocene, and how they relate to the futures field, both historic, contemporary and in the futures. To understand the nature of sustainability we have to elaborate on the nature of nature. The paper starts with a presentation of different networks of futurists, their historic and contemporary roles, not least their relations to the emerging socio-political movements in the late 1960s, 1970s, and beyond. In particular, the author highlights the emergence of socio-ecological thinking and critically review three forms of reactions to the cartesian modernist dualist thinking. These demonstrate the need for philosophical reflection on these distinctions, but also indirectly force us to rethink what futures research and -competences means today. The contemporary climate- and environment policy strategies are important, but as futurists, we need to look beyond the horizon of current climate- and environmental policy issues. Further, these results point toward a need within the Futures Field to discuss possible ontologies of Futures and the creation of new diagnosis of the era concepts. This author has experimented with a term called Universal Perspectivism, but the point here is not to define a certain concept but to open up for further terminological investigations. As futurists we need other conceptual frames than those which are defined with negations and ``post''-suffixes.}, - langid = {english}, - keywords = {Discourse,Foresight,Futures literacy,Futures research,Futures studies,Ontology \& epistemology,Policy building,Social theory,Sociological imagination,Sociology of knowledge,Strategic planning,Sustainability,Transhumanism,Universal perspectivism}, - file = {/Users/fabio/Zotero/storage/CJJY7NCH/Øverland_2023_Sustainability and futures, moving beyond The Natural and The Artificial.pdf;/Users/fabio/Zotero/storage/2W9X556H/S001632872300006X.html} -} - -@article{owenEconomicsProjectinducedDisplacement2020, - title = {On the Economics of Project-Induced Displacement: A Critique of the Externality Principle in Resource Development Projects}, - author = {Owen, John R. and Zhang, Ruilian and Solar, Andrea Arratia}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - pages = {123247}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123247}, - urldate = {2020-08-09} -} - -@article{owenOrganisationalInstitutionalisationResponsible2021, - title = {Organisational Institutionalisation of Responsible Innovation}, - author = {Owen, Richard and Pansera, Mario and Macnaghten, Phil and Randles, Sally}, - year = {2021}, - month = jan, - journal = {Research Policy}, - volume = {50}, - number = {1}, - pages = {104132}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104132}, - urldate = {2020-10-05}, - file = {/Users/fabio/Zotero/storage/UFH7K4PW/full-text.pdf} -} - -@article{owenThermalMechanicalCharacterization2023, - title = {Thermal and Mechanical Characterization of Composite Materials from Industrial Plastic Wastes and Recycled Nylon Fibers for Floor Paving Tiles Application}, - author = {Owen, Macaulay M. and Achukwu, Emmanuel O. and Romli, Ahmad Zafir and Abdullah, Abdul Halim Bin and Ramlee, Muhammad Hanif and Shuib, Solehuddin Bin}, - year = {2023}, - month = jul, - journal = {Waste Management}, - volume = {166}, - pages = {25--34}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.04.038}, - urldate = {2023-05-11}, - abstract = {Industrial plastic waste is growing globally at an alarming rate and environmental pollution from traditional landfill disposal and incineration treatments are of great concern. As a strategy to reduce plastic pollution, value-added composite materials from industrial plastic wastes reinforced with recycled nylon fibers for use in floor paving tile applications were developed. This is to address the disadvantages of existing ceramic tiles which are relatively heavy, brittle, and expensive. The plastic waste composite structures were produced via compression molding technique at an optimized randomly oriented constant fiber volume fraction of 50~wt\% after the initial sorting, cleaning, drying, pulverizing, and melt-mixing. The molding temperature, pressure, and time for the composite's structures were 220 \textcelsius, 65~kg.cm-3, and 5~min respectively. The composites' thermal, mechanical, and microstructural properties were characterized in accordance with appropriate ASTM standards. From the results obtained, the differential scanning calorimetry (DSC) of mixed plastic wastes and nylon fiber wastes showed a processing temperature range of 130\textendash 180 \textcelsius, and 250 \textcelsius{} respectively. Thermal degradation temperature (TGA) of the plastic and nylon fiber waste composites were stable above 400 \textcelsius{} with maximum bending strength, however, the reinforced plastic waste sandwiched composite structures had outstanding mechanical properties indicating unique characteristics suitable for floor paving tiles. Hence, the current research has developed tough and lightweight tiles composites that are economically viable, and their application will contribute to the development of the building and construction sectors thereby reducing about 10\textendash 15\% of annual plastic waste generation and a sustainable environment.}, - langid = {english}, - keywords = {Composites,Floor paving tiles,Mixed plastic wastes,Nylon fiber wastes}, - file = {/Users/fabio/Zotero/storage/HRFBJLFH/Owen et al. - 2023 - Thermal and mechanical characterization of composi.pdf;/Users/fabio/Zotero/storage/8PYUAI69/S0956053X2300329X.html} -} - -@article{pacheSustainableCityLearning2023, - title = {Sustainable City: {{Learning}} from the {{Middle Ages}}}, - shorttitle = {Sustainable City}, - author = {Pach{\'e}, Gilles}, - year = {2023}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {197}, - pages = {107083}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107083}, - urldate = {2023-06-13}, - langid = {english}, - keywords = {History,Middle Ages,Pollution,Sustainable city}, - file = {/Users/fabio/Zotero/storage/Z526PLER/S0921344923002197.html} -} - -@article{paciarottiLogisticsShortFood2020, - title = {The Logistics of the Short Food Supply Chain: A Literature Review}, - author = {Paciarotti, Claudia and Torregiani, Francesco}, - year = {2020}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {26}, - pages = {428--442}, - publisher = {{Elsevier BV}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.10.002}, - urldate = {2020-10-31}, - abstract = {The sustainability of food chains is an issue consumers, policy makers, researchers, food producers and suppliers are increasingly interested in. This interest is also confirmed by the considerable development of short food supply chain (SFSC) initiatives as an alternative to the globalised food chains typical of the contemporary food industry. However, while SFSCs have grown over the recent years, their logistics is still a challenging issue affecting their performance. Previous SFSC-focused literature reviews have neglected this particular aspect, concentrating primarily on the different forms of supply chains and the benefits and limitations associated with SFSC. The goal of this paper, instead, is to increase researchers' and practitioners' knowledge of the role and potential of logistics in improving the effectiveness and sustainability of SFSCs. This work, in fact, focuses on this specific and relevant aspect of SFSC and highlights its possible impact on SFSC development. From a logistics perspective, it identifies a series of actions to be implemented to effectively improve SFSC: to make environmental sustainable choices during all the phases of food distribution, to optimise the location of supply chain nodes, to improve the distribution route and restructure the supply chain. In addition to these actions, farmers are required to adopt an open approach to innovative distribution systems, vertical and horizontal collaboration as well as to cooperation with researchers. The paper's conclusions provide suggestions for future research development and underline the necessity to adopt a holistic and integrated approach and abandon a retrospective evaluation analysis in favour of a more dynamic and future-oriented attitude.} -} - -@article{paciniNetworkAnalysisInternational2020, - title = {Network Analysis of International Trade in Plastic Scrap}, - author = {Pacini, Henrique and Shi, Grace and {Sanches-Pereira}, Alessandro and Filho, Ant{\^o}nio Carlos da Silva}, - year = {2020}, - month = oct, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.10.027}, - urldate = {2020-11-07} -} - -@article{Paciorek-Sadowska2019, - title = {New Poly(Lactide-Urethane-Isocyanurate) Foams Based on Bio-{{polylactideWaste}}}, - author = {{Paciorek-Sadowska}, Joanna and Borowicz, Marcin and Isbrandt, Marek}, - year = {2019}, - journal = {Polymers}, - volume = {11}, - number = {3}, - issn = {20734360}, - doi = {10.3390/polym11030481}, - abstract = {The article presents the results of research on the synthesis of a new eco-polyol based on polylactide (PLA) waste and its use for the production of rigid polyurethane-polyisocyanurate (RPU/PIR) foams. The obtained recycling-based polyol was subjected to analytical, physicochemical and spectroscopic tests (FTIR, 1H NMR, 13C NMR) to confirm its suitability for the synthesis of polyurethane materials. Then, it was used to partially replace petrochemical polyol in polyurethane formulation. The obtained RPU/PIR foams were characterized by lower apparent density, brittleness, and water absorption. In addition, foams modified by eco-polyol had higher flame retardancy, as compared to reference foam. The results of the research show that the use of PLA polyol based on plastic waste may be an alternative to petrochemical polyols. This research matches with the current trends of sustainable development and green chemistry.}, - keywords = {3D printing waste,Mechanical properties,PLA,Recycling,Rigid polyurethane-polyisocyanurate foams}, - file = {/Users/fabio/Zotero/storage/J8VVCMW2/New Poly(lactide-urethane-isocyanurate) FoamsBased on Bio-Polylactide Waste.pdf} -} - -@article{Padee2013, - title = {Preparation of {{Poly}}({{Lactic Acid}}) and {{Poly}}({{Trimethylene Terephthalate}}) {{Blend Fibers}} for {{Textile Application}}}, - author = {Padee, Sirada and Thumsorn, Supaphorn and On, Jessada Wong and Surin, Prayoon and Apawet, Chiyaprek and Chaichalermwong, Tirapong and Kaabbuathong, Narin and {O-Charoen}, Narongchai and Srisawat, Natee}, - year = {2013}, - month = jan, - journal = {Energy Procedia}, - volume = {34}, - pages = {534--541}, - publisher = {{Elsevier B.V.}}, - issn = {18766102}, - doi = {10.1016/j.egypro.2013.06.782}, - urldate = {2014-03-20}, - file = {/Users/fabio/Zotero/storage/UUWX2MQG/Padee et al. - 2013 - Preparation of Poly(Lactic Acid) and Poly(Trimethylene Terephthalate) Blend Fibers for Textile Application.pdf} -} - -@article{Padilla-Rivera2021, - title = {Social Circular Economy Indicators: {{Selection}} through Fuzzy Delphi Method}, - author = {{Padilla-Rivera}, Alejandro and {do Carmo}, Breno Barros Telles and Arcese, Gabriella and Merveille, Nicolas}, - year = {2021}, - month = apr, - journal = {Sustainable Production and Consumption}, - volume = {26}, - pages = {101--110}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.09.015}, - urldate = {2020-10-31}, - abstract = {Circular economy (CE) promotes better resource use by reducing waste and keeping products and materials in use and supports natural system regeneration. However, the social dimension of CE is virtually non-existent. Moreover, there is no holistic framework to select the social indicators to be used to assess the positive or negative impacts of CE strategies. Thus, this paper proposes an approach to identify key social indicators of CE through qualitative (Delphi) and quantitative (fuzzy logic) tools that objectively account for the uncertainty associated with data collection and judgement elicitation and number of attributes (indicators) by considering the vagueness of the data. The research includes a hybrid approach to explore multiple social indicators, a survey of social indicators for CE experts to arrive at a consensus regarding the social measures that are required and an analysis of the resulting survey data to converge on the key social indicators relevant to CE.. The results show that the most relevant social indicators for CE experts are consumer health and safety, followed by poverty, food security and governance. These findings suggest that indicators such as the eradication of poverty and hunger are priorities for CE experts. This could be attributed to the power of CE practices to help achieve several Sustainable Development Goals (SDGs) targets, particularly those that are most directly related to CE strategies.}, - keywords = {social impacts}, - file = {/Users/fabio/Zotero/storage/H6NWYS73/full-text.pdf} -} - -@article{paesProspectsCircularBioeconomy2022, - title = {Prospects for a Circular Bioeconomy in Urban Ecosystems: {{Proposal}} for a Theoretical Framework}, - shorttitle = {Prospects for a Circular Bioeconomy in Urban Ecosystems}, - author = {Paes, Luis Alberto Bertolucci and Stolte Bezerra, Barbara and Jugend, Daniel and Liar Agudo, Fabiana}, - year = {2022}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {380}, - pages = {134939}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.134939}, - urldate = {2022-12-12}, - abstract = {The interconnectedness of value chains, the different motivations of actors, and the complexity of urban ecosystems (UE) have given rise to calls for more comprehensive approaches to diagnosis urban sustainability. In this regard, the circular bioeconomy (CBE) is attractive for, in theory, it ensures regenerative capacity and offers the possibility of improving the resilience of ecosystem services. However, there is a risk that the delineation of the narrative will be limited to issues narrowly defined by key actors, without considering value creation beyond financial. This paper explores how the alignment of CBE principles can support the services provided by UE, considering their socio-ecological needs. To this end, we propose an adaptive theoretical framework supported by a qualitative and comparative analysis of the current scientific literature. The main contributions of the paper are: (i) propose an original structure using the nature-based solutions (NbS) concept as background and (ii) provide a new typology built from the biophysical boundaries, drivers, barriers, strategies, and indicators identified. The framework presents itself as an instrument capable of guiding further research in the thematic area, facilitating the identification of trade-offs, benefits, and co-benefits, and represents a step forward in the search toward generalisation, reducing uncertainties and utopian notions that mould the CBE.}, - langid = {english}, - keywords = {Circular economy,Climate change,Ecosystem services,Sustainability,Urban ecology}, - file = {/Users/fabio/Zotero/storage/HIW2MSQF/Paes et al_2022_Prospects for a circular bioeconomy in urban ecosystems.pdf;/Users/fabio/Zotero/storage/RKYQ6VP9/S0959652622045127.html} -} - -@incollection{Pakkanen2017, - title = {About the {{Use}} of {{Recycled}} or {{Biodegradable Filaments}} for {{Sustainability}} of {{3D Printing}}}, - author = {Pakkanen, Jukka and Manfredi, Diego and Minetola, Paolo and Iuliano, Luca}, - editor = {Campana, Giampaolo and Howlett, Robert J. and Setchi, Rossi and Cimatti, Barbara}, - year = {2017}, - volume = {68}, - pages = {776--785}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-319-57078-5_73}, - isbn = {978-3-319-57077-8}, - keywords = {3d printing,additive manufacturing,bio-based filaments,biodegradability,fdm,fused deposition modelling,recycling,sustainability}, - file = {/Users/fabio/Zotero/storage/TWXVAIVK/About the Use of Recycled or Biodegradable Filaments for Sustainability of 3D Printing.pdf} -} - -@article{Pakpour2014, - title = {Household Waste Behaviours among a Community Sample in {{Iran}}: {{An}} Application of the Theory of Planned Behaviour}, - author = {Pakpour, Amir H. and Zeidi, Isa Mohammadi and Emamjomeh, Mohammad Mahdi and Asefzadeh, Saeed and Pearson, Heidi}, - year = {2014}, - journal = {Waste Management}, - volume = {34}, - number = {6}, - pages = {980--986}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2013.10.028}, - abstract = {Understanding the factors influencing recycling behaviour can lead to better and more effective recycling programs in a community. The goal of this study was to examine factors associated with household waste behaviours in the context of the theory of planned behaviour (TPB) among a community sample of Iranians that included data collection at time 1 and at follow-up one year later at time 2. Study participants were sampled from households under the coverage of eight urban health centers in the city of Qazvin. Of 2000 invited households, 1782 agreed to participate in the study. A self-reported questionnaire was used for assessing socio-demographic factors and the TPB constructs (i.e. attitude, subjective norms, perceived behavioural control, and intention). Furthermore, questions regarding moral obligation, self-identity, action planning, and past recycling behaviour were asked, creating an extended TPB. At time 2, participants were asked to complete a follow-up questionnaire on self-reported recycling behaviours. All TPB constructs had positive and significant correlations with each other. Recycling behaviour at time 1 (past behaviour) significantly related to household waste behaviour at time 2. The extended TPB explained 47\% of the variance in household waste behaviour at time 2. Attitude, perceived behavioural control, intention, moral obligation, self-identity, action planning, and past recycling behaviour were significant predictors of household waste behaviour at time 2 in all models. The fact that the expanded TPB constructs significantly predicted household waste behaviours holds great promise for developing effective public campaigns and behaviour-changing interventions in a region where overall rates of household waste reduction behaviours are low. Our results indicate that educational materials which target moral obligation and action planning may be particularly effective. \textcopyright{} 2013 Elsevier Ltd.}, - isbn = {0956-053X}, - pmid = {24252373}, - keywords = {Environmental education,Recycling behaviour,Sustainable waste management,Theory of planned behaviour,Waste behaviour}, - file = {/Users/fabio/Zotero/storage/5VIV3VCZ/Household waste behaviours among a community sample in Iran An application of the theory of planned behaviour.pdf} -} - -@article{Palafox-Alcantar2020, - title = {The Complementary Use of Game Theory for the Circular Economy: {{A}} Review of Waste Management Decision-Making Methods in Civil Engineering}, - author = {{Palafox-Alcantar}, P.G. and Hunt, D.V.L. and Rogers, C.D.F.}, - year = {2020}, - month = feb, - journal = {Waste Management}, - volume = {102}, - pages = {598--612}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.11.014} -} - -@article{palazzoIntelligentPackagingTransition2023, - title = {Intelligent Packaging in the Transition from Linear to Circular Economy: {{Driving}} Research in Practice}, - shorttitle = {Intelligent Packaging in the Transition from Linear to Circular Economy}, - author = {Palazzo, Maria and Vollero, Agostino and Siano, Alfonso}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {388}, - pages = {135984}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.135984}, - urldate = {2023-02-09}, - abstract = {Developing packaging with enhanced features helps organisations transition from a linear to a circular economy. The paper aims at mapping the barriers, incentives and potential outcomes which can be reached by organisations via such innovative packaging solutions and providing insights to researchers concerning the application of their knowledge in this complex field. Our study comprises 130 articles from 1991 to 2021, identified through a systematic review methodology. The evolution of intelligent packaging was classified and mapped taking into account the principles of circular economy, the main incentives and barriers which can help or hinder the upsurge of the packaging with enhanced features, and the potential outcomes that can be achieved by organisations. By using a Multiple Correspondence Analysis (MCA) combined with the Choice of Active Categories (COREM) approach, three clusters were identified: (i) buying process, (ii) value chain issues, (iii) collaborative issues. These clusters enable researchers to position their future contributions in the area and associated insights linked to new trends in the packaging field should facilitate managers in developing strategic pathways and supporting action research to enhance their packaging solutions. The paper also suggests to ``decompose'' the field, by starting with bottom-up studies with a circumscribed scope, and then synergically puts them together into a more general perspective.}, - langid = {english}, - keywords = {Circular economy,Cluster analysis,Intelligent packaging,Multiple correspondence analysis,Smart packaging,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/689FEX5F/Palazzo et al. - 2023 - Intelligent packaging in the transition from linea.pdf;/Users/fabio/Zotero/storage/ZWKJRZHA/S0959652623001427.html} -} - -@article{Paletta2019, - ids = {paletta2019}, - title = {Barriers and Challenges to Plastics Valorisation in the Context of a Circular Economy: {{Case}} Studies from {{Italy}}}, - author = {Paletta, Angelo and Leal Filho, Walter and Balogun, Abdul Lateef and Foschi, Eleonora and Bonoli, Alessandra}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {241}, - pages = {118149}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118149}, - urldate = {2022-01-04}, - abstract = {In 2017, over 320 million tons of polymers, excluding fibers, were manufactured across the globe. The excessive amounts of plastics produced today pose a threat to both man and nature. Urgent approaches towards reducing plastic consumption and increasing its recyclability are needed. This paper discusses the matter of accelerating the circularity of plastic-based material systems. It investigates a sample of plastics-converting companies in Emilia Romagna region (Italy), which stand out for radical innovations in business models, with the aim to catalyse changes in current manufacturing practices. The findings provide empirical support for a positive relationship between business strategies and the use of non-virgin plastic materials. The innovative value of this paper relies on the fact that it elaborates on the vision established within the European Strategy for Plastics in a Circular Economy that sets ambitious targets about achieving high plastic recycling targets by 2025. Legislative, economic, technological and social barriers can only be tackled by radically revising the current philosophy of designing, producing, distributing and consuming plastic as part of goods and services. A systemic thinking perspective is an essential building block in this context: moving from a micro to a meso-scale analysis can represent a useful means supporting the creation of viable management approaches towards achieving environmental and economic gains, especially in European plastic conversion industry, where SMEs are the majority (about 50000). Thanks to its analysis and scope, this paper provides useful insights to the plastic industry: it shows that this substantial improvements in this sector will require innovative solutions and major efforts by key decision makers, producers, recyclers, manufacturer, retailers as well as consumers.}, - keywords = {Consumption,Contamination,Industry,Plastic,Production}, - file = {/Users/fabio/Zotero/storage/LD652BMB/Paletta et al. - 2019 - Barriers and challenges to plastics valorisation i.pdf} -} - -@inproceedings{Pallot2010c, - title = {Living {{Lab}} Research Landscape: From User-Centred Design and User Experience towards User Co-Creation}, - booktitle = {First {{European Summer School}} ``{{Living Labs}}''- 25-27 {{Ao\^ut}}.}, - author = {Pallot, Marc and Trousse, Brigitte and Senach, Bernard and Scapin, Dominique}, - year = {2010}, - address = {{Paris}} -} - -@inproceedings{Pallot2011a, - title = {Future Internet and Living Lab Research Domain Landscapes: Filling the Gap between Technology Push and Application Pull in the Context of Smart Cities}, - booktitle = {{{eChallenges}} E-2011 {{Conference Proceedings}}, {{IIMC International Information Management Corporation}}}, - author = {Pallot, Marc and Trousse, Brigitte and Senach, Bernard and Schaffers, Hans and Kominos, Nicos}, - editor = {Cunningham, Paul and Cunningham, Miriam}, - year = {2011}, - publisher = {{Paul Cunningham and Miriam Cunningham}}, - isbn = {978- 1-90 5824-27-4} -} - -@inproceedings{pallotInvestigatingImpactVisual2021, - title = {Investigating the {{Impact}} of {{Visual Representations}} during {{Ideation}}: {{Towards Immersive eXperience Design}}}, - shorttitle = {Investigating the {{Impact}} of {{Visual Representations}} during {{Ideation}}}, - booktitle = {2021 {{IEEE International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}}/{{ITMC}})}, - author = {Pallot, Marc and Dupont, Laurent and Fleury, Sylvain and {Araque-Tellez}, Gina and Richir, Simon}, - year = {2021}, - month = jun, - pages = {1}, - publisher = {{IEEE}}, - doi = {10.1109/ICE/ITMC52061.2021.9570244}, - urldate = {2023-02-22}, - abstract = {While there is a plethora of publications devoted to the benefits of visualization; its drawbacks, apparently, did not receive the same attention. Nonetheless, a list of potential drawbacks exists in the current body of knowledge, which, unfortunately, do not directly address the facilitation of ideas generation by different design stakeholders, including users. Beside introducing the longer-term goal of a series of planned studies, this paper presents a first empirical study for setting the baseground on immersiveness. The results show that the choice of a visual representation type must be made wisely as it has an impact on the way participants imagine a facility space and its furnishing layout. They also unveil that, for the same facility space, the layout suggested by the participants is likely to be different depending on whether they visualize a top, perspective or sectional view, or even an inspirational photo of the space.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/MP8Y9VP2/Pallot et al_2021_Investigating the Impact of Visual Representations during Ideation.pdf} -} - -@article{Palmie2019, - title = {The Evolution of the Financial Technology Ecosystem: {{An}} Introduction and Agenda for Future Research on Disruptive Innovations in Ecosystems}, - author = {Palmi{\'e}, Maximilian and Wincent, Joakim and Parida, Vinit and Caglar, Umur}, - year = {2019}, - month = nov, - journal = {Technological Forecasting and Social Change}, - pages = {119779}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119779} -} - -@article{palmieCircularBusinessModel2020, - title = {Circular Business Model Implementation: {{Design}} Choices, Orchestration Strategies, and Transition Pathways for Resource-Sharing Solutions}, - author = {Palmi{\'e}, Maximilian and Boehm, Jonas and Lekkas, Charlotte-Katharina and Parida, Vinit and Wincent, Joakim and Gassmann, Oliver}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124399}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124399}, - urldate = {2020-10-19} -} - -@article{palmieriSingleprocess3DprintedStructures2021, - title = {Single-Process {{3D-printed}} Structures with Vibration Durability Self-Awareness}, - author = {Palmieri, M. and Slavi{\v c}, J. and Cianetti, F.}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - volume = {47}, - pages = {102303}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102303}, - urldate = {2021-09-21} -} - -@article{Pan2018, - title = {The {{Effects}} of {{Iron}}, {{Silicon}}, {{Chromium}}, and {{Aluminum Additions}} on the {{Physical}} and {{Mechanical Properties}} of {{Recycled 3D Printing Filaments}}}, - author = {Pan, Guan-Ting and Chong, Siewhui and Tsai, Hsuan-Ju and Lu, Wei-Hua and Yang, Thomas C.K.}, - year = {2018}, - month = jun, - journal = {Advances in Polymer Technology}, - volume = {37}, - number = {4}, - pages = {1176--1184}, - issn = {07306679}, - doi = {10.1002/adv.21777}, - keywords = {3D Printing,Al,Cr),Extrusion,Polymer,Recycling,{$\alpha$}-Fe(Si}, - file = {/Users/fabio/Zotero/storage/B5SWQAH8/the effects of iron, silicon, chromium, and aluminum additions on the physical and mechanical properties of recycled 3d printing filaments.pdf} -} - -@article{Panda2009, - title = {Optimization of {{Fused Deposition Modelling}} ({{FDM}}) {{Process Parameters Using Bacterial Foraging Technique}}}, - author = {Panda, Samir Kumar and Padhee, Saumyakant and Sood, Anoop Kumar and Mahapatra, S.S.}, - year = {2009}, - journal = {Intelligent Information Management}, - volume = {01}, - number = {02}, - pages = {89--97}, - issn = {2150-8194}, - doi = {10.4236/iim.2009.12014}, - urldate = {2013-03-10}, - keywords = {anova,bacterial foraging,ccd,central,composite design,distortion,fdm,fused deposition modelling,strength}, - file = {/Users/fabio/Zotero/storage/YRY6JRS6/m-api-4f823af2-dcc7-e97b-4878-5071aec2667f.pdf} -} - -@article{pandeyOpenElectronicsMedical2019, - title = {Open {{Electronics}} for {{Medical Devices}}: {{State-of-Art}} and {{Unique Advantages}}}, - author = {{Pandey} and {Vora}}, - year = {2019}, - month = nov, - journal = {Electronics}, - volume = {8}, - number = {11}, - pages = {1256}, - publisher = {{MDPI AG}}, - issn = {2079-9292}, - doi = {10.3390/electronics8111256}, - urldate = {2020-07-03}, - abstract = {{$<$}p{$>$}A wide range of medical devices have significant electronic components. Compared to open-source medical software, open (and open-source) electronic hardware has been less published in peer-reviewed literature. In this review, we explore the developments, significance, and advantages of using open platform electronic hardware for medical devices. Open hardware electronics platforms offer not just shorter development times, reduced costs, and customization; they also offer a key potential advantage which current commercial medical devices lack\textemdash seamless data sharing for machine learning and artificial intelligence. We explore how various electronic platforms such as microcontrollers, single board computers, field programmable gate arrays, development boards, and integrated circuits have been used by researchers to design medical devices. Researchers interested in designing low cost, customizable, and innovative medical devices can find references to various easily available electronic components as well as design methodologies to integrate those components for a successful design.{$<$}/p{$>$}}, - keywords = {Computed tomography,Healthcare,Medical devices,Medical infusion pumps,Neurological sensors,Open electronics,Open-source electronics,Posture correction,Ultrasound}, - file = {/Users/fabio/Zotero/storage/RLU3ZWUW/full-text.pdf} -} - -@article{pandeyPracticalWaysRecycle2023, - title = {Practical Ways to Recycle Plastic: Current Status and Future Aspects}, - shorttitle = {Practical Ways to Recycle Plastic}, - author = {Pandey, Kailash Pati and Jha, Ujjwal R. and Kushwaha, Jeetesh and Priyadarsini, Madhumita and Meshram, Siddharth U. and Dhoble, Abhishek S.}, - year = {2023}, - month = may, - journal = {Journal of Material Cycles and Waste Management}, - volume = {25}, - number = {3}, - pages = {1249--1266}, - issn = {1611-8227}, - doi = {10.1007/s10163-023-01611-0}, - urldate = {2023-08-30}, - abstract = {With sky-rocketing demand and unrestricted global production, plastics have become an inseparable part of daily human life and the circular economy at large. Notwithstanding, it is crucial to consider that they lead to substantial economic losses, disrupt the ecological equilibrium, and cause environmental pollution. In this regard, several strategies have been employed in the past, such as recycling techniques, waste management systems, extended producer responsibility, reduction of incineration, plastic prohibition, and globular thinking. These methods work toward the more sustainable usage of plastics in the future, but so far, none have scaled up to the industries' growing demands. It also reflects the current state of the art of these methods concerning the status of scientific research and gap areas in the recycling pathways. Chemical recycling seems to be one of the most efficient techniques, as it is less time consuming and the least waste is generated, but the requirement of efficient sorting makes it time consuming. While other methods generate waste and are comparatively more time consuming. Thus, each recycling method has its limitations, indicating that much work is needed to tackle the growing problem of plastic pollution. In addition, in the context of the present drawbacks of the methods, this review discusses a concomitant solution to the problem of plastic pollution via sustainable development by offering an alternative to fossil fuel-based plastic materials, i.e., biodegradable plastics.}, - langid = {english}, - keywords = {Chemical recycling,Circular economy,Cold-plasma pyrolysis,Mechanical recycling,Plastic pollution,Recyclable polymers}, - file = {/Users/fabio/Zotero/storage/DFGBQN9U/Pandey et al. - 2023 - Practical ways to recycle plastic current status .pdf} -} - -@article{panditTakingPerspectivesFuture2021, - title = {Taking the Perspectives of Future Generations as an Effective Method for Achieving Sustainable Waste Management}, - author = {Pandit, Arpana and Nakagawa, Yoshinori and Timilsina, Raja Rajendra and Kotani, Koji and Saijo, Tatsuyoshi}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {1526--1536}, - publisher = {{Elsevier B.V.}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.03.019}, - urldate = {2021-04-29}, - abstract = {Solid waste management (SWM) has become a global concern with the recent rise in population growth, rapid urbanization, adoption of advanced technologies, and changing patterns of consumption. The increasing volume of waste has posed challenges to the environment and human health, and the issue is even more critical in developing countries. Therefore, in order to address this issue, we designed and conducted a deliberative field experiment to test whether taking the perspective of imaginary future generations could broaden the temporal and spatial perspectives of urban residents, and how such perspectives affect individuals' preferences for sustainable SWM policies. A total of 290 subjects participated in the experiment in Nepal. We prepared three treatments: The subjects in Treatment 1 did not experience the perspective of future generations, also known as baseline treatment. Then, the subjects in Treatment 2 experienced the perspective of future generations only to look back at the present, and those in Treatment 3 experienced the perspective of future generations to create future visions (i.e., for 2049) and to look back at the present. The results showed that the subjects in Treatment 2 (odds ratio 2.05; 95\% CI: 1.11\textendash 3.82) and Treatment 3 (odds ratio 2.23; 95\% CI: 1.05\textendash 4.76) were more likely to choose the SWM policy options compared to their counterparts in the baseline Treatment 1. This implies that taking the perspective of future generations affects the preferences of individuals with regard to SWM policy options, which can be beneficial to people in the future as well as in distant locations. Overall, the finding suggests that taking the perspective of future generations could have an impact on individuals' thinking and preferences for sustainable waste management behavior and the betterment of the future.}, - keywords = {Future design,Future generations,Nepal,Solid waste management} -} - -@article{panResearchProgressPlastic2020, - title = {Research Progress for Plastic Waste Management and Manufacture of Value-Added Products}, - author = {Pan, Duo and Su, Fengmei and Liu, Chuntai and Guo, Zhanhu}, - year = {2020}, - month = dec, - journal = {Advanced Composites and Hybrid Materials}, - volume = {3}, - number = {4}, - pages = {443--461}, - issn = {2522-0136}, - doi = {10.1007/s42114-020-00190-0}, - urldate = {2023-08-31}, - abstract = {Nowadays, plastic products are closely related to human life. While it brings convenience to human beings, there are also great health and environmental threats. Most of the plastic products are polymer compounds obtained by addition polymerization or condensation polymerization. It will cause chronic poisoning to humans if long-term use plastic products are used. In addition, due to the relatively low production cost and short service life of plastic products, a large amount of waste plastics is discarded every year, which causes serious environmental problems. Traditional disposal technologies such as landfill and incineration not only waste a lot of resources but also accompany serious secondary pollution problems. In order to meet the needs of sustainable development and green environmental protection, various recycling methods have been explored for waste plastics, which have been used to develop economic and environmentally friendly value-added products. This paper reviews a range of management methods for the increasingly severe problem of discarded plastics and briefly summarizes the advantages and disadvantages of some methods, lists some examples of more valuable recycled products and materials, and finally puts forward the improvement direction and challenge to solve this problem.}, - langid = {english}, - keywords = {Challenges,Management methods,Recycling,Value added products,Waste plastics}, - file = {/Users/fabio/Zotero/storage/KETLF6LB/Pan et al_2020_Research progress for plastic waste management and manufacture of value-added.pdf} -} - -@article{panseraInnovationDegrowthCase2018, - title = {Innovation for De-Growth: {{A}} Case Study of Counter-Hegemonic Practices from {{Kerala}}, {{India}}}, - shorttitle = {Innovation for De-Growth}, - author = {Pansera, Mario and Owen, Richard}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - series = {Technology and {{Degrowth}}}, - volume = {197}, - pages = {1872--1883}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2016.06.197}, - urldate = {2022-10-11}, - abstract = {Our research focuses on the cross-pollination of the discourses of innovation and (post)development in the Global South. We suggest that the buzzword innovation is progressively infiltrating the lexicon and situated practices of development. Within this a hegemonic framing of innovation is emerging that leverages the language of inclusion to promote connection to, and participation in, the global free market economy. This, we hypothesise is closing down a broader debate concerning the goals and roles of innovation and technology in the so called developing world. At the same time, our research suggests that this emerging hegemony is contested, presenting as alternative, minority framings with different normative underpinnings for technology and innovation that challenge the pro-growth and market-led dominant paradigm. We present the results of one of these through a qualitative in-depth case study conducted in the Indian state of Kerala. The case provides interesting insights for the degrowth community in two regards. First it shows a concrete example of an alternative framing of technology underpinned by a set of normative principles connected to those of degrowth. Second, the case shows that alternative technological paradigms based on principles aligned with those of degrowth are not only possible, but can and do co-exist with the hegemonic paradigm.}, - langid = {english}, - keywords = {Degrowth from the Global South,Discourse of development,Technological innovation}, - file = {/Users/fabio/Zotero/storage/NWNPKLNK/Pansera y Owen - 2018 - Innovation for de-growth A case study of counter-.pdf;/Users/fabio/Zotero/storage/93N4D6YY/S0959652616308848.html} -} - -@article{papadisChallengesDecarbonizationEnergy2020, - title = {Challenges in the Decarbonization of the Energy Sector}, - author = {Papadis, Elisa and Tsatsaronis, George}, - year = {2020}, - month = aug, - journal = {Energy}, - volume = {205}, - pages = {118025}, - issn = {0360-5442}, - doi = {10.1016/j.energy.2020.118025}, - urldate = {2023-02-16}, - abstract = {In order to limit the effects of climate change, the carbon dioxide emissions associated with the energy sector need to be reduced. Significant reductions can be achieved by using appropriate technologies and policies. In the context of recent discussions about climate change and energy transition, this article critically reviews some technologies, policies and frequently discussed solutions. The options for carbon emission reductions are grouped into (1) generation of secondary energy carriers, (2) end-use energy sectors and (3) sector interdependencies. The challenges on the way to a decarbonized energy sector are identified with respect to environmental sustainability, security of energy supply, economic stability and social aspects. A global carbon tax is the most promising instrument to accelerate the process of decarbonization. Nevertheless, this process will be very challenging for humanity due to high capital requirements, the competition among energy sectors for decarbonization options, inconsistent environmental policies and public acceptance of changes in energy use.}, - langid = {english}, - keywords = {Carbon tax,CO emissions,Decarbonization,Energy sector,Renewable energy sources}, - file = {/Users/fabio/Zotero/storage/R64R2NX3/Papadis y Tsatsaronis - 2020 - Challenges in the decarbonization of the energy se.pdf;/Users/fabio/Zotero/storage/SJUQTUNQ/S0360544220311324.html} -} - -@article{Papazetis2019a, - title = {Mapping of Deposition-Stable and Defect-Free Additive Manufacturing via Material Extrusion from Minimal Experiments}, - author = {Papazetis, George and Vosniakos, George Christopher}, - year = {2019}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {100}, - number = {9-12}, - pages = {2207--2219}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-018-2820-1}, - abstract = {\textcopyright{} 2018, Springer-Verlag London Ltd., part of Springer Nature. Despite significant advances and established advantages of material extrusion additive manufacturing, limitations still exist regarding ability to increase productivity and still maintain high shape fidelity and defect-free parts within the range of process parameter values that a 3D printer may support. In the present study, a predictive process-planning tool to balance productivity and quality of fabricated parts according to user's requirements is developed. Taguchi design of experiments (DoE) method is employed in order to determine the process parameters that impact shape fidelity in terms of material deposition stability that results in surfaces of acceptable flatness and defect-free parts. The development of four well-documented fabrication defects is quantified by CAD-to-part 3D comparison. Then, analysis of variance (ANOVA) was performed to reveal, characteristically, that, even though reduced speed generally results in improved shape fidelity, defects arise when small layer thickness is also set. On the other hand, increased layer thickness may be coupled with moderate material deposition speed to improve process productivity without sacrificing part shape. A highly reliable artificial neural network (ANN) is constructed in an optimum way and trained on the previous experiments with the aim to predict shape fidelity across the entire factor level range. Hence, material flow rate which is a function of investigated factors is provided with direct feedback by the ANN regarding possible defects or deteriorated part shape. The method presented lays the basis for robust process optimization on any 3D printer.}, - keywords = {Artificial neural network,Fused filament fabrication,Material extrusion,Process optimization,Shape fidelity,Taguchi method}, - file = {/Users/fabio/Zotero/storage/4U4KK8U8/mapping of deposition-stable and defect-free additive manufacturing via material extrusion from minimal experiments.pdf} -} - -@article{Papen2019, - title = {Network Configuration of a Bottled Water Closed-Loop Supply Chain with Green Supplier Selection}, - author = {Papen, Pezhman and Amin, Saman Hassanzadeh}, - year = {2019}, - month = jul, - journal = {Journal of Remanufacturing}, - volume = {9}, - number = {2}, - pages = {109--127}, - issn = {2210-464X}, - doi = {10.1007/s13243-018-0061-y} -} - -@article{pappasParametricStudyCharacterization2021, - title = {A Parametric Study and Characterization of Additively Manufactured Continuous Carbon Fiber Reinforced Composites for High-Speed {{3D}} Printing}, - author = {Pappas, John M. and Thakur, Aditya R. and Leu, Ming C. and Dong, Xiangyang}, - year = {2021}, - month = apr, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {113}, - number = {7-8}, - pages = {2137--2151}, - publisher = {{Springer Science and Business Media Deutschland GmbH}}, - issn = {14333015}, - doi = {10.1007/s00170-021-06723-1}, - urldate = {2021-05-20}, - abstract = {High-speed 3D printing has recently gained much interest due to its potentials in improving efficiency of fabricating complex geometry components and applications in large-scale additive manufacturing (AM). In this study, a parametric study is performed experimentally to investigate factors affecting high-speed 3D printing of continuous carbon fiber reinforced composites (CFRCs), including material deposition rate, print (nozzle traverse) speed, and nozzle tilt angle based on a novel multi-axis AM approach. The method uses thermoplastic pellets and continuous carbon fiber tows as feedstock materials. The obtained sample quality and mechanical properties are investigated with respect to deposition rate, print speed, and nozzle tilt angle. The fiber impregnation quality is examined through microstructure analysis and correlated with the process conditions and mechanical properties. Increasing deposition rate and tilt angle both improve fiber impregnation quality, enabling implementation of higher print speed and yielding improved mechanical properties. This, combined with demonstrations of printed complex geometry components, shows the great potentials of the proposed method for AM of continuous CFRCs at high speeds. The results of this study also provide further guidance on design and manufacturing of large-volume, high-strength CFRCs through 3D printing.}, - keywords = {Additive manufacturing,Carbon fiber reinforced composite,Continuous fiber reinforcement,High-speed 3D printing} -} - -@article{parchomenkoEvaluationResourceEffectiveness2020, - title = {Evaluation of the Resource Effectiveness of Circular Economy Strategies through Multilevel {{Statistical Entropy Analysis}}}, - author = {Parchomenko, Alexej and Nelen, Dirk and Gillabel, Jeroen and Vrancken, Karl C. and Rechberger, Helmut}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104925}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104925}, - urldate = {2020-06-22} -} - -@article{Paris2016, - title = {Comparative Environmental Impacts of Additive and Subtractive Manufacturing Technologies}, - author = {Paris, Henri and Mokhtarian, Hossein and Coatan{\'e}a, Eric and Museau, Matthieu and Ituarte, Inigo Flores}, - year = {2016}, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {65}, - number = {1}, - pages = {29--32}, - issn = {17260604}, - doi = {10.1016/j.cirp.2016.04.036}, - abstract = {Additive manufacturing technologies are opening new opportunities in term of production paradigm and manufacturing possibilities. Nevertheless, in term of environmental impact analysis supplementary research works require to be made in order to compare and evaluate them with traditional manufacturing processes. In this article, we propose to use Life Cycle Assessment (LCA) method and to associate decision criteria to support the selection of manufacturing strategies for an aeronautic turbine. The dimensionless criteria allow to define environmental trade-offs between additive and subtractive methods. This study provides an approach generalizable to other parts and processes.}, - isbn = {00078506}, - keywords = {Electron beam machining,Energy efficiency,Environment}, - file = {/Users/fabio/Zotero/storage/YLIKMAMV/Comparative environmental impacts of additive and subtractive manufacturing technologies.pdf} -} - -@article{Park2019, - title = {Impact of {{Unlisted Small}} and {{Medium-Sized Enterprises}}' {{Business Strategies}} on {{Future Performance}} and {{Growth Sustainability}}}, - author = {Park, Won and Sung, Chang Soo and Byun, Chung Gyu}, - year = {2019}, - month = aug, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {3}, - pages = {60}, - issn = {2199-8531}, - doi = {10.3390/joitmc5030060}, - abstract = {This study aims to identify, from among business strategies presented in Miles and Snow (1978, 2003), those that increase the future performance or growth sustainability of unlisted small and medium-sized enterprises (SMEs) in Korea. (This study applied the scope of SMEs based on Article 2 of the Enforcement Decree of the Tax Exemption Restriction Act in Korea. The Korean tax law sets the scope of SMEs based on independence criteria set by the scale of sales, assets, and affiliation, and subordination. For example, the size standard of a manufacturing industry can be regarded as a small business if the average sales amount is less than 150 billion won or the total amount of assets is less than 500 billion won for three years.) In addition, it analyzes measured variables of business strategy for factors influencing unlisted SMEs' future performance and growth potential. The objective is to determine a business strategy for unlisted SMEs, which are small, financially challenged, and have shorter lifespans and faster growth rates. The results highlight that investment in research and development (R\&D) for new products influences both future performance and growth sustainability. R\&D is an important intangible resource of the firm, which increases future risk due to high future uncertainty, but it is also an important factor to increase future performance or value based on resource-based theory. In the accounting field, research and development expenditure also provided evidence of future excess return or performance. This study is meaningful because it identifies the role of research and development in increasing future growth sustainability in SMEs, thus emphasizing change and innovation.} -} - -@article{Park2019a, - title = {Digital {{Innovation Adoption}} and {{Its Economic Impact Focused}} on {{Path Analysis}} at {{National Level}}}, - author = {Park, HyunJee and Choi, Sang Ok}, - year = {2019}, - month = aug, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {3}, - pages = {56}, - issn = {2199-8531}, - doi = {10.3390/joitmc5030056}, - abstract = {Purpose: The advancement of technologies and their adoption affects the socio-economic growth of nations. This research is focused on how this innovation adoption path is linked to economic growth of nations since the previous IT revolution has been combined with existing industries and adding values in terms of applying intelligence through adopting digital technologies. Approach/Design/Methodology: There are two different approaches\textemdash process approach and factor approach\textemdash in innovation adoption research. Innovation diffusion research, which is one of the process approaches, is related to adoption, diffusion, and impact theories, but there are limitations in explaining the perspective of a nation other than individual and organization on the basis of previous literatures. Therefore, we build the integrative model to verify innovative growth path of nations by applying Diffusion of Innovation Theory (DoI) and Technology (T)-Organization (O)-Environment (E) framework, which can explain factors of affecting innovation. We evaluate eight hypotheses with data collected from 137 to 212 nations using international information index by credible organizations: World Economic Forum (WEF), World Bank, United Nations (UN), and International Communications Union (ITU), based on the integrative model we proposed. The path analysis using Structural Equation Modeling (SEM) is performed, and the result shows that the path from technological innovation capabilities (T), human capital (O), and environment (E) is related directly to economic impact, except for the path from human capital to value chain breadth directly and indirectly. The indirect path through Information and Communication Technology (ICT) access, use, and value chain helps to understand the full impact of digital innovation. Practical implications: By verifying this relationship, we expect to give suggestions in policy perspective and in building strategy towards innovative growth of countries. Our results show that technological innovation capabilities take time to show impact in terms of economic growth than the other factors, which are human capital, and political and regulatory environment of country. The nurture of human capital directly affects to the economic growth of nations relative to other T and E factors. The political and regulatory environment support stable ICT usage, which gives impact to the economic growth of nations.} -} - -@article{Park2020, - title = {Twenty Years of Technology and Strategic Roadmapping Research: {{A}} School of Thought Perspective}, - author = {Park, Hyunkyu and Phaal, Rob and Ho, Jae-yun and O'Sullivan, Eoin}, - year = {2020}, - journal = {Technological Forecasting and Social Change}, - volume = {154}, - number = {January}, - pages = {119965}, - publisher = {{Elsevier}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119965}, - keywords = {Roadmapping,Schools of thought,Solution-oriented research,Theory-oriented research}, - file = {/Users/fabio/Zotero/storage/QCMWTVMX/Twenty years of technology and strategic roadmapping research- A school of thought perspective.pdf} -} - -@article{parkDrivingSocialImpact2021, - title = {Driving Social Impact at the Bottom of the {{Pyramid}} through the Internet-of-Things Enabled Frugal Innovations}, - author = {Park, Sukyung and Rosca, Eugenia and Agarwal, Nivedita}, - year = {2021}, - month = sep, - journal = {Technovation}, - pages = {102381}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2021.102381}, - urldate = {2021-09-21} -} - -@article{parkTracingEmergenceNew2022, - title = {Tracing the Emergence of New Technology: {{A}} Comparative Analysis of Five Technological Domains}, - shorttitle = {Tracing the Emergence of New Technology}, - author = {Park, Inchae and Triulzi, Giorgio and Magee, Christopher L.}, - year = {2022}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {184}, - pages = {122014}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.122014}, - urldate = {2022-09-18}, - abstract = {The emergence of new technologies is an important and highly researched field. This paper identifies characteristics of the early stage of technology emergence by analyzing the initial patents in five different technologies (Optical information storage, optical information transmission, genome sequencing, 3D printing and magnetic resonance imaging). From the science and technology push perspective, the characteristics such as influence of initial technological knowledge, linkage to scientific knowledge, and actors of technological activity are identified in the emerging stage of the new technology. The main findings of the research are firstly that technological and scientific knowledge are strongly linked in the emerging stage as the initial patents in all five technologies cite scientific papers more highly than do patents that support the ongoing development of the technologies. Second, the initial patents during the emerging stage do not play a significant role in the overall technological knowledge flow over time. Finally, the proportion of patents held by non-firm entities in the early stage of technology emergence is relatively larger than that in the other stages in four out of five technological domains. The results provide some important hypotheses about the interaction of scientific results and technological invention that have not previously been offered and that can be further researched as data sources improve.}, - langid = {english}, - keywords = {Emerging technology,Initial technological knowledge,Technological domain,Technology emergence,Technology-science linkage}, - file = {/Users/fabio/Zotero/storage/G93WFLML/S0040162522005352.html} -} - -@article{parpalaInfillParametersInfluence2021, - title = {Infill Parameters Influence over the Natural Frequencies of {{ABS}} Specimens Obtained by Extrusion-Based {{3D}} Printing}, - author = {Parpala, Radu Constantin and Popescu, Diana and Pupaza, Cristina}, - year = {2021}, - month = jul, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-05-2020-0110}, - urldate = {2021-07-05}, - keywords = {3d printing,Finite element modelling,Free vibrations,Infill,Process parameters} -} - -@article{parrisCulturesTransformationIntegrated2022, - title = {Cultures of Transformation: {{An}} Integrated Framework for Transformative Action}, - author = {Parris, Hannah and Sorman, Alevgul H. and Valor, Carmen and Tuerk, Andreas and {Anger-Kraavi}, Annela}, - year = {2022}, - month = jun, - journal = {Environmental Science \& Policy}, - volume = {132}, - pages = {24--34}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.02.008}, - urldate = {2022-03-13}, - abstract = {The challenges posed by climate change have generated many initiatives that seek to implement societal transformations. In most cases, these focus on technology developments, adoption and diffusion but neglect the social and cultural dimensions of a transformation. Insights from systems and behavioural sciences can provide valuable guidance on these aspects, but the utility of this literature is limited by two factors. Firstly, the literature on the intersection between social transformation and psychological processes of behaviour change by individuals is limited. Secondly, the complex technical nature of much of the transition relevant literature limits its accessibility by stakeholders outside academia. We seek to address these challenges through the development of a transdisciplinary Transformation Process Framework for use as a `knowledge integration' tool as part of a co-design process for transformative change. The Framework: (1) develops a systematic narrative of the transformational changes that need to be triggered at multiple scales (from individual to society), (2) generates a map to identify key variables, drivers, and blockers in a transformation process integrating different knowledge from fragmented disciplines; (3) serves as a tool to support the exploration of relevant academic (and other) literature to collate and utilise relevant knowledge.}, - keywords = {Energy Cultures Framework,Knowledge co-production,Multi-level Perspective,Psychology of behavioural change,Sustainability transitions} -} - -@article{parsaIntersectionInterrelationInterdependence2021, - title = {Intersection, Interrelation or Interdependence? {{The}} Relationship between Circular Economy and Nexus Approach}, - author = {Parsa, Ali and Van De Wiel, Marco J. and Schmutz, Ulrich}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {313}, - pages = {127794}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127794}, - urldate = {2021-06-21} -} - -@article{parthasarathyOvercomingWickedProblems2021, - ids = {parthasarathy2021a}, - title = {Overcoming Wicked Problems and Institutional Voids for Social Innovation: {{University-NGO}} Partnerships in the {{Global South}}}, - author = {Parthasarathy, Balaji and Dey, Supriya and Gupta, Pranjali}, - year = {2021}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {173}, - pages = {121104}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121104}, - urldate = {2021-09-15}, - file = {/Users/fabio/Zotero/storage/HZ82H69F/Parthasarathy et al. - 2021 - Overcoming wicked problems and institutional voids.pdf} -} - -@article{pascualDiverseValuesNature2023, - title = {Diverse Values of Nature for Sustainability}, - author = {Pascual, Unai and Balvanera, Patricia and Anderson, Christopher B. and {Chaplin-Kramer}, Rebecca and Christie, Michael and {Gonz{\'a}lez-Jim{\'e}nez}, David and Martin, Adrian and Raymond, Christopher M. and Termansen, Mette and Vatn, Arild and Athayde, Simone and Baptiste, Brigitte and Barton, David N. and Jacobs, Sander and Kelemen, Eszter and Kumar, Ritesh and Lazos, Elena and Mwampamba, Tuyeni H. and Nakangu, Barbara and O'Farrell, Patrick and Subramanian, Suneetha M. and {van Noordwijk}, Meine and Ahn, SoEun and Amaruzaman, Sacha and Amin, Ariane M. and {Arias-Ar{\'e}valo}, Paola and {Arroyo-Robles}, Gabriela and {Cant{\'u}-Fern{\'a}ndez}, Mariana and Castro, Antonio J. and Contreras, Victoria and De Vos, Alta and Dendoncker, Nicolas and Engel, Stefanie and Eser, Uta and Faith, Daniel P. and Filyushkina, Anna and Ghazi, Houda and {G{\'o}mez-Baggethun}, Erik and Gould, Rachelle K. and Guibrunet, Louise and Gundimeda, Haripriya and Hahn, Thomas and Harm{\'a}{\v c}kov{\'a}, Zuzana V. and {Hern{\'a}ndez-Blanco}, Marcello and {Horcea-Milcu}, Andra-Ioana and Huambachano, Mariaelena and Wicher, Natalia Lutti Hummel and Ayd{\i}n, Cem {\.I}skender and Islar, Mine and Koessler, Ann-Kathrin and Kenter, Jasper O. and Kosmus, Marina and Lee, Heera and Leimona, Beria and Lele, Sharachchandra and Lenzi, Dominic and Lliso, Bosco and Mannetti, Lelani M. and Mer{\c c}on, Juliana and {Monroy-Sais}, Ana Sof{\'i}a and Mukherjee, Nibedita and Muraca, Barbara and Muradian, Roldan and Murali, Ranjini and Nelson, Sara H. and {Nemog{\'a}-Soto}, Gabriel R. and {Ngouhouo-Poufoun}, Jonas and Niamir, Aidin and Nuesiri, Emmanuel and Nyumba, Tobias O. and {\"O}zkaynak, Beg{\"u}m and Palomo, Ignacio and Pandit, Ram and {Paw{\l}owska-Mainville}, Agnieszka and {Porter-Bolland}, Luciana and Quaas, Martin and Rode, Julian and Rozzi, Ricardo and Sachdeva, Sonya and Samakov, Aibek and Schaafsma, Marije and Sitas, Nadia and Ungar, Paula and Yiu, Evonne and Yoshida, Yuki and Zent, Eglee}, - year = {2023}, - month = aug, - journal = {Nature}, - pages = {1--11}, - publisher = {{Nature Publishing Group}}, - issn = {1476-4687}, - doi = {10.1038/s41586-023-06406-9}, - urldate = {2023-08-21}, - abstract = {Twenty-five years since foundational publications on valuing ecosystem services for human well-being1,2, addressing the global biodiversity crisis3 still implies confronting barriers to incorporating nature's diverse values into decision-making. These barriers include powerful interests supported by current norms and legal rules~such as property rights, which determine whose values and which values of nature are acted on. A better understanding of how and why nature is (under)valued is more urgent than ever4. Notwithstanding agreements to incorporate nature's values into actions, including the Kunming-Montreal Global Biodiversity Framework (GBF)5 and the UN Sustainable Development Goals6, predominant environmental and development policies still prioritize a subset of values, particularly those linked to markets, and ignore other ways people relate to and benefit from nature7. Arguably, a `values crisis' underpins the intertwined crises of biodiversity loss and climate change8, pandemic emergence9 and socio-environmental injustices10. On the basis of more than 50,000 scientific publications, policy documents and Indigenous and local knowledge sources, the Intergovernmental Platform on Biodiversity and Ecosystem Services (IPBES) assessed knowledge on nature's diverse values and valuation methods to gain insights into their role in policymaking and fuller integration into decisions7,11. Applying this evidence, combinations of values-centred approaches are proposed to improve valuation and address barriers to uptake, ultimately leveraging transformative changes towards more just (that is, fair treatment of people and nature, including inter- and intragenerational equity) and sustainable futures.}, - copyright = {2023 The Author(s)}, - langid = {english}, - keywords = {Ecology,Sustainability}, - file = {/Users/fabio/Zotero/storage/8KMQMPF9/Pascual et al_2023_Diverse values of nature for sustainability.pdf} -} - -@article{Paskaleva2018, - title = {Open Innovation and the Evaluation of Internet-Enabled Public Services in Smart Cities}, - author = {Paskaleva, Krassimira and Cooper, Ian}, - year = {2018}, - month = dec, - journal = {Technovation}, - volume = {78}, - pages = {4--14}, - issn = {01664972}, - doi = {10.1016/j.technovation.2018.07.003} -} - -@article{paskalevaAreLivingLabs2021, - title = {Are Living Labs Effective? {{Exploring}} the Evidence}, - author = {Paskaleva, Krassimira and Cooper, Ian}, - year = {2021}, - month = aug, - journal = {Technovation}, - volume = {106}, - pages = {102311}, - publisher = {{Elsevier}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2021.102311}, - urldate = {2021-06-10} -} - -@article{Pasricha2018, - title = {Exploration of {{3D}} Printing to Create Zero-Waste Sustainable Fashion Notions and Jewelry}, - author = {Pasricha, Anupama and Greeninger, Rachel}, - year = {2018}, - journal = {Fashion and Textiles}, - volume = {5}, - number = {1}, - publisher = {{Springer Singapore}}, - issn = {21980802}, - doi = {10.1186/s40691-018-0152-2}, - abstract = {This research followed design as a research paradigm to apply zero-waste principles to 3D printing in efforts to ensure sustainable applications of 3D technology in the apparel and fashion industry. Researchers used Rhinoceros 5, Tinkercad, MakerBot Replicator 2 desktop 3D printer, and polylactic acid filament to create elaborate designs. This design research is the first successful attempt at 3D printing for biodegradable zero-waste fashion notions and accessories. The researcher employed design thinking and strategies to create objects without the use of rafts and supporters removing waste creation. Multiple attempts resulted in an acceptable outcome of five pendant designs for necklaces, two earring designs, and nine layer-designed buttons. The buttons were attached to a draped cape design utilizing 95\% of the fabric. There is a considerable potential to use this disruptive technology in designing and creating fashions that are unique, sustainable (zero-waste), and made on demand.}, - keywords = {3D printing,Fashion,Sustainability,Technology,Zero-waste}, - file = {/Users/fabio/Zotero/storage/2I7AHUJP/Exploration of 3D printing to create zero‑waste sustainable fashion notions and jewelry.pdf} -} - -@article{patrickApplicationorientedAssessmentInterlayer2021, - title = {Application-Oriented Assessment of the Interlayer Tensile Strength of Additively Manufactured Polymers}, - author = {Patrick, Striemann and Daniel, Huelsbusch and Michael, Niedermeier and Frank, Walther}, - year = {2021}, - month = jun, - journal = {Additive Manufacturing}, - pages = {102095}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102095}, - urldate = {2021-06-10} -} - -@article{pattersonExploringGovernancePolitics2017, - title = {Exploring the Governance and Politics of Transformations towards Sustainability}, - author = {Patterson, James and Schulz, Karsten and Vervoort, Joost and {van der Hel}, Sandra and Widerberg, Oscar and Adler, Carolina and Hurlbert, Margot and Anderton, Karen and Sethi, Mahendra and Barau, Aliyu}, - year = {2017}, - month = sep, - journal = {Environmental Innovation and Societal Transitions}, - volume = {24}, - pages = {1--16}, - publisher = {{Elsevier B.V.}}, - issn = {22104224}, - doi = {10.1016/j.eist.2016.09.001}, - urldate = {2022-03-13}, - abstract = {The notion of `transformations towards sustainability' takes an increasingly central position in global sustainability research and policy discourse in recent years. Governance and politics are central to understanding and analysing transformations towards sustainability. However, despite receiving growing attention in recent years, the governance and politics aspects of transformations remain arguably under-developed in the global sustainability literature. A variety of conceptual approaches have been developed to understand and analyse societal transition or transformation processes, including: socio-technical transitions, social-ecological systems, sustainability pathways, and transformative adaptation. This paper critically surveys these four approaches, and reflects on them through the lens of the Earth System Governance framework (Biermann et al., 2009). This contributes to appreciating existing insights on transformations, and to identifying key research challenges and opportunities. Overall, the paper brings together diverse perspectives, that have so far remained largely fragmented, in order to strengthen the foundation for future research on transformations towards sustainability.}, - keywords = {Institutional change,Pathways,Societal change,Sustainability transformations,Transformative change,Transitions}, - file = {/Users/fabio/Zotero/storage/WXY22YC4/full-text.pdf} -} - -@article{Patton2019, - title = {Manipulating Magnetic Anisotropy in Fused Filament Fabricated Parts via Macroscopic Shape, Mesoscopic Infill Orientation, and Infill Percentage}, - author = {Patton, Michael V and Ryan, Patrick and Calascione, Thomas and Fischer, Nathan and Morgenstern, Andrew and Stenger, Nathan and {Nelson-Cheeseman}, Brittany B.}, - year = {2019}, - month = may, - journal = {Additive Manufacturing}, - volume = {27}, - number = {March}, - pages = {482--488}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.03.026}, - keywords = {Anisotropy,Fused filament fabrication,Infill orientation,Infill percentage,Magnetic susceptibility,Part geometry}, - file = {/Users/fabio/Zotero/storage/E6NRNVM5/Manipulating magnetic anisotropy in fused filament fabricated parts via macroscopic shape, mesoscopic infill orientation, and infill percentage.pdf} -} - -@article{Pauget2019, - title = {The Implementation of the {{Internet}} of {{Things}}: {{What}} Impact on Organizations?}, - author = {Pauget, Bertrand and Dammak, Ahmed}, - year = {2019}, - month = mar, - journal = {Technological Forecasting and Social Change}, - volume = {140}, - pages = {140--146}, - issn = {00401625}, - doi = {10.1016/j.techfore.2018.03.012} -} - -@article{Paul2020, - title = {A Web-Based Geographic Interface System to Support Decision Making for Municipal Solid Waste Management in {{England}}}, - author = {Paul, Mathew and Bussemaker, Madeleine J.}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {263}, - pages = {121461}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121461}, - urldate = {2020-04-16}, - abstract = {To evaluate the feasibility and sustainability of the waste management solutions, it is necessary to assess the quantity and the flows of the waste generated. This research developed a web application which serves as a decision support system for those involved in the planning and management of municipal solid waste. In contrast to present web-based solutions, this tool provides the necessary information regarding the supply chain that is required to assess the suitability of waste valorisation in a particular location such as waste types, waste quantities and related waste contractors. Using publicly available data, a web geographic information system was designed where factors that affect the supply chain of municipal solid waste can be investigated. These include spatial and temporal variation of waste generated. The concept was demonstrated in the developed web application using publicly available data about England. Waste market opportunities were identified, for example Kent County Council and Essex County Council were identified to have the highest quantity of incinerated waste with and without energy recovery (344 and 65 kiloton) respectively. Then Staffordshire and Lancashire County Councils were identified to have the highest quantity of hazardous and non-hazardous waste being landfilled (5 and 296 kiloton) respectively. Seasonal variation was inconsistent across counties, with East Northamptonshire having little seasonal variation in household waste ({$<$}500 tonne variation) as opposed to East Riding of Yorkshire which had higher waste volumes in summer with up to 15,000 tonne variation). Circular economy partners were also identified through the web application and these results are presented in context of waste-derived supply chain decisions. The web application is therefore able to provide a comprehensive tool for improving both strategic and logistical decision-making process for municipal solid waste management.}, - keywords = {Circular economy,Decision support tool,Municipal solid waste (MSW),Waste management,Web-GIS} -} - -@article{Paula2005, - title = {Characterization of Aluminized Polyethylene Blends via Mechanical Recycling}, - author = {daS Paula, Marcos M and Rodrigues, Fabiana B B Medeiros and Bernardin, Adriano M. and Fiori, M{\'a}rcio A. and Angioletto, El{\'i}dio}, - year = {2005}, - journal = {Materials Science and Engineering A}, - volume = {403}, - number = {1-2}, - pages = {37--41}, - issn = {09215093}, - doi = {10.1016/j.msea.2005.05.060}, - abstract = {The use and consumption of polymeric resins is growing around the world because they are easily formed, and can be used in a variety of applications. The increasing consumption results in a great environmental impact because the used plastics are discarded in nature in a non-rational form. Facing all these problems, recycling becomes a powerful strategy regarding the reduction of the environmental impact caused by plastic waste. In this work polymeric blends were prepared by mechanical recycling and characterized. LDPE/Al residues from cartooned packaging were blended with recycled HDPE/LDPE and virgin PE resins. It was observed that processability, mechanical properties, chemical resistance and water absorption are dependent on the blend compositions. Also, an aluminum film was found to remain as isolated particles in the polymeric matrix and the mechanical behavior of the blend depends on the aluminum dispersion. Either, the blend water absorption depends on recycled material contamination, mainly polyamides. Finally, the amount of recycled material added to the blends determines both chemical stability and thermal characteristics. \textcopyright{} 2005 Elsevier B.V. All rights reserved.}, - keywords = {Blends,Environmental impact,Polymer,Recycling}, - file = {/Users/fabio/Zotero/storage/PCGM2DST/Characterization of aluminized polyethylene blends via mechanical recycling.pdf} -} - -@article{Paulic2014, - title = {Reverse {{Engineering}} of {{Parts}} with {{Optical Scanning}} and {{Additive Manufacturing}}}, - author = {Paulic, Matej and Irgolic, Tomaz and Balic, Joze and Cus, Franc and Cupar, Andrej and Brajlih, Tomaz and Drstvensek, Igor}, - year = {2014}, - journal = {Procedia Engineering}, - volume = {69}, - pages = {795--803}, - publisher = {{Elsevier B.V.}}, - issn = {18777058}, - doi = {10.1016/j.proeng.2014.03.056}, - abstract = {This paper presents reverse engineering of car volume button. The purpose of article is to introduce reverse engineering procedure, what we need to do this kind of procedure and how we can remanufacture car's volume button. The purpose of reverse engineering is to manufacture another object based on a physic and existing object for which 3D CAD is not available. The first we need digital version of object. Because our car's volume button has free formed surfaces we decided to use 3D scanning technology to obtain the point cloud of existing object. With the help of point cloud we can developed 3D CAD model which will be used for manufacturing of button pair. We used for manufacturing of pair of buttons machine for selective laser sintering Formiga P 100. In the paper are also described costs of making of one pair of buttons and whole workspace. \textcopyright{} 2014 The Authors. Published by Elsevier Ltd.}, - keywords = {Optical scanning,Production engineering,Reverse engineering,Selective laser sintering}, - file = {/Users/fabio/Zotero/storage/T9AM73PQ/Reverse Engineering of Parts with Optical Scanning and Additive Manufacturing.pdf} -} - -@article{pauliukCodesignDigitalTransformation2022, - title = {Co-Design of Digital Transformation and Sustainable Development Strategies - {{What}} Socio-Metabolic and Industrial Ecology Research Can Contribute}, - author = {Pauliuk, Stefan and Koslowski, Maximilian and Madhu, Kavya and Schulte, Simon and Kilchert, Sebastian}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {343}, - pages = {130997}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130997}, - urldate = {2022-03-13}, - abstract = {Sustainable development and digital transformation profoundly re-shape industrial societies but have been studied largely independently. In light of pressing global environmental and social challenges, both transformations need to be well aligned with each other to achieve multiple objectives such as listed under the UN Sustainable Development goals (SDGs). Quantitative research on interlinkages, energy and material implications, and co-dependencies between the different digital transformation (DT) and sustainable development (SD) strategies is emerging and has so far focused on estimating the overall potential and on life cycle assessment (LCA). To frame the problem systematically, we developed a hierarchy of system levels for studying society's material and energy use, including the four levels: product/process, process cluster, life cycle/material cycle, and economy-wide. We mapped major DT strategies and the SDGs to the hierarchy and found a wide gap in system coverage: While most DT strategies focus on the product, process and process cluster levels, the SDGs predominantly target the economy-wide level. Socio-metabolic and industrial ecology research is needed to inform decision makers on how the two transformations can be aligned to reach overarching societal goals, such as the SDGs, expanding on and moving beyond LCA. Future research needs to assess combinations of multiple DT and SD strategies. It needs to study how DT can help decouple human wellbeing from negative environmental and social impacts. Research needs to focus on the strategies' deployment potential, infrastructure needs, impacts on material cycles, and potential to transform both service demand and industrial production.} -} - -@article{pauliukIndustrialEcologyIntegrated2017, - title = {Industrial Ecology in Integrated Assessment Models}, - author = {Pauliuk, Stefan and Arvesen, Anders and Stadler, Konstantin and Hertwich, Edgar G.}, - year = {2017}, - month = jan, - journal = {Nature Climate Change}, - volume = {7}, - number = {1}, - pages = {13--20}, - publisher = {{Nature Publishing Group}}, - issn = {1758-6798}, - doi = {10.1038/nclimate3148}, - urldate = {2022-09-25}, - abstract = {An in-depth review of five major integrated assessment models from an industrial ecology perspective reveals differences between the fields regarding the modelling of linkages in the industrial system.}, - langid = {english}, - keywords = {Climate-change mitigation,Climate-change policy,Energy supply and demand,Socioeconomic scenarios}, - file = {/Users/fabio/Zotero/storage/GSHW8QZZ/Pauliuk et al_2017_Industrial ecology in integrated assessment models.pdf;/Users/fabio/Zotero/storage/ND9HTBF5/nclimate3148.html} -} - -@article{paulsonPublicAcceptancePostGrowth2022, - ids = {paulson2022a}, - title = {Public {{Acceptance}} of {{Post-Growth}}: {{Factors}} and {{Implications}} for {{Post-Growth Strategy}}}, - shorttitle = {Public {{Acceptance}} of {{Post-Growth}}}, - author = {Paulson, Lily and B{\"u}chs, Milena}, - year = {2022}, - month = aug, - journal = {Futures}, - pages = {103020}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2022.103020}, - urldate = {2022-08-11}, - abstract = {Growing evidence supports the need to re-evaluate the nature and function of our economies in favour of post-growth principles if we are to have a socially and environmentally viable future. This study contributes to the discussion on how to achieve such a future by addressing a remaining gap in the literature about the public acceptance of post-growth, since a viable transition requires public support to validate political actions. Taking a mixed-methods approach, we ask which values and socio-economic characteristics are associated with support for post-growth and why. On average among 34 European countries, 60.5\% of people are in favour of post-growth. Values such as environmentalism, collectivism and post-materialism were found to support post-growth visions of the future, but support for post-growth and these values is lower among disadvantaged people. We conclude that greater emphasis on redistribution and improving opportunities and livelihoods for disadvantaged people in a post-growth economy is key to making such a future more acceptable to them. However, this conflicts with policy preferences and values such as hierarchy, meritocracy, and individualism that tend to be more prominent among people who are well-off.}, - langid = {english}, - keywords = {acceptance,Acceptance,equality,Equality,European Values Study,Post-growth,socio-economic characteristics,Socio-economic characteristics,values,Values}, - file = {/Users/fabio/Zotero/storage/VM3Z76CG/Paulson y Büchs - 2022 - Public acceptance of post-growth Factors and impl.pdf;/Users/fabio/Zotero/storage/V7N6SR49/S0016328722001203.html} -} - -@article{Pauna2018, - title = {The Scientific Research on Ecosystem Services: {{A}} Bibliometric Analysis}, - author = {Pauna, Valentina H. and Picone, Flavio and Le Guyader, Gianpiero and Buonocore, Elvira and Franzese, Pier Paolo}, - year = {2018}, - journal = {Ecological Questions}, - volume = {29}, - number = {3}, - pages = {53--62}, - issn = {20835469}, - doi = {10.12775/EQ.2018.022}, - abstract = {The scientific research on ecosystem services (ES) has grown substantially over the past ten years, making more evident the vital role played by natural ecosystems in support of human economy and well-being. Several studies showed that biodiversity represents a fundamental part of the Earth's life support system. Biodiversity considerably affects ecosystem functioning while contributing to the provision of different types of ES. The increasing ecological awareness of scientists, citizens, and policy makers on the importance of natural capital stocks and ES flows boosted nature conservation strategies and the development of more environmentally friendly production processes. In this study, we explored the global scientific literature on ES over the last thirty years. The software VOSviewer was used to create maps based on network data of scientific publications displaying relationships among scientific journals, researchers, and countries. Specific keywords were finally used to explore the co-occurrence of different terms connected to the research on ES. Results show that the Millennium Ecosystem Assessment had a major impact on the scientific literature dealing with the ES concept. The top country researching on ES was USA, while the top journal was Ecological Economics. In terms of co-occurrence, the top keywords were "biodiversity", "management", "conservation", and "climate change". This study identified the main research areas characterizing the scientific literature on ES. Social network analysis and maps based on network data make possible the application of systems thinking in bibliometric science. This type of analysis allows for the investigation of research development in specific fields of science, capturing the interdisciplinarity of research topics crossing the boundary of specific disciplines, as it is the case of ES.}, - keywords = {Bibliometric analysis,Ecosystem services,Social network analysis,VOSviewer}, - file = {/Users/fabio/Zotero/storage/PYU28SJ6/17550-42611-3-PB.pdf} -} - -@article{paunaUsingInformationFlow2022, - title = {Using Information Flow Analysis to Establish Key Data Gaps in the Assessment of Marine Microplastic Pollution}, - author = {Pauna, Valentina H. and Askham, Cecilia}, - year = {2022}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13312}, - urldate = {2022-08-11}, - abstract = {Despite the persistent research interest in marine microplastic (MP) particles, the pollutant is still largely misunderstood. Significant data gaps hinder experts' understanding of the sources, pathways, and fate of marine MPs, making it difficult to assess its environmental implications. Interdisciplinary work is required to fully understand the complexity of marine MPs (MMP) and to address the potential stress that this form of pollution may put on marine ecosystems. This study introduces an approach called information flow analysis (IFA), which intends to connect different fields of study through data flows, demonstrating the importance of these fields in the development of life cycle impact assessment (LCIA) of MMPs. The IFA approach was used to clarify where microplastic data is expected to come from with the goal of providing insight into how to obtain the data required for risk assessment (RA) and life cycle assessment (LCA). In order to observe and demonstrate these links, the next step was to develop a site-specific coarse material flow analysis (MFA) based on previously estimated MP emissions from Norway and data from MP sampling in the inner Oslofjord. The coarse MFA demonstrated that MP sources in Norway were estimated to contribute between 85\% and 96\% rubbery MP particles and between 4\% and 15\% semisynthetic MP particles in 2018, while blue mussels sampled by the Norwegian Institute for Water Research (NIVA) contained 93\% rubbery MP particles and 7\% semisynthetic MP particles. This seems to demonstrate a connection between Norwegian MP sources (emissions) and MP levels observed in the environment.}, - copyright = {\textcopyright{} 2022 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of the International Society for Industrial Ecology.}, - langid = {english}, - keywords = {industrial ecology,interdisciplinary,life cycle assessment,life cycle impact assessment,marine microplastics,material flow analysis,SDG 14}, - file = {/Users/fabio/Zotero/storage/UU282BZW/Pauna_Askham_Using information flow analysis to establish key data gaps in the assessment of.pdf;/Users/fabio/Zotero/storage/PEGQU33M/jiec.html} -} - -@book{paustPrototypingGuideEntrepreneurs2022, - title = {Prototyping - {{A Guide For Entrepreneurs}}}, - author = {Paust, Steffen and Korsgaard, Steffen}, - year = {2022}, - month = mar, - abstract = {For most entrepreneurs, the list of unanswered questions is long, and the path from idea to a finished solution can be difficult to spot. In order to succeed as an entrepreneur, it is crucial that you find good answers to these questions - and preferably do so as quickly, cheaply and efficiently as possible. This is where prototyping comes into play as one of the means to help you continuously assess whether or not you are on the right track. In this hands-on guide, we briefly review what prototyping is, why it is useful, how it can be used, and point out some of the related challenges and pitfalls.}, - file = {/Users/fabio/Zotero/storage/ND765I36/Paust y Korsgaard - 2022 - Prototyping - A Guide For Entrepreneurs.pdf} -} - -@inproceedings{Pavan2016, - title = {Understanding {{The Link Between Process Parameters}}, {{Microstructure And Mechanical Properties Of Laser Sintered Pa12 Parts Through X-ray Computed Tomography}}}, - booktitle = {Proceedings of the 2nd {{International Conference}} on {{Progress}} in {{Additive Manufacturing}} ({{Pro-AM}} 2016)}, - author = {Pavan, Michele and Craeghs, Tom and Puyvelde, Peter Van and Kruth, Jean-pierre and Dewulf, Wim}, - year = {2016}, - pages = {569--574}, - publisher = {{Research Publishing}}, - abstract = {Laser Sintering is an Additive Manufacturing technique increasingly used to produce functional parts, with polyamide-12 (PA12) being by far the most processed material. It is common practice in industry to process a mix of recycled and virgin PA12 powder; however it is not yet fully understood how the Laser Sintering process parameters influence the microstructural composition for this mixture, namely the degree of crystallinity, the porosity characteristics and the distribution of the pores within the sintered parts. In this work X-ray Computed Tomography (CT) is used to investigate the porosity of tensile bars printed flatwise using a 50/50 mix of used and virgin PA12 processed with different Laser Sintering energy densities (EDs). Analysis of the pores characteristics and image processing of the CT-slices parallel to the building platform provide insights into the link between Laser Sintering process parameters, pores formation and their arrangement into the sintered polymer for different energy density levels. This information combined with the crystallinity values measured by Differential Scanning Calorimetry, gives a complete picture of the microstructure of the sintered material and its link with the resulting tensile properties.} -} - -@inproceedings{Pavlo2018, - title = {{{3D-Printing Based Distributed Plastic Recycling}}: {{A Conceptual Model}} for {{Closed-Loop Supply Chain Design}}}, - booktitle = {2018 {{IEEE International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}}/{{ITMC}})}, - author = {Pavlo, Santander and Fabio, Cruz and Hakim, Boudaoud and Mauricio, Camargo}, - year = {2018}, - month = jun, - pages = {1--8}, - publisher = {{IEEE}}, - doi = {10.1109/ICE.2018.8436296}, - copyright = {All rights reserved}, - isbn = {978-1-5386-1469-3}, - keywords = {3D printer,3D printing,closed loop supply chain,plastic,recycling}, - file = {/Users/fabio/Zotero/storage/IVUALWKB/3D-Printing Based Distributed Plastic Recycling- A Conceptual Model for Closed-Loop Supply Chain Design.pdf} -} - -@article{Pazienza2020, - ids = {pazienza2020}, - title = {The {{EU}} Policy for a Plastic Economy: {{Reflections}} on a Sectoral Implementation Strategy}, - author = {Pazienza, Pasquale and De Lucia, Caterina}, - year = {2020}, - month = feb, - journal = {Business Strategy and the Environment}, - volume = {29}, - number = {2}, - pages = {779--788}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {10990836}, - doi = {10.1002/bse.2445}, - urldate = {2022-01-04}, - abstract = {After reviewing the main EU policy documents on the plastic waste issue, this work conceptualises an analysis framework to investigate farmers' attitudes to market-based tools (i.e., subsidies, tax-credits, and payback mechanisms in extended producer responsibility schemes) through which the introduction of an operational scheme for a better management of their plastic waste can be incentivised in line with the 2018 European Strategy for Plastics in a Circular Economy. A total number of 1,783 farmers responded to a purpose-built questionnaire. Results show that most of the plastic waste they produce is piping and packaging and that tax credit represents their most favoured incentivising tool.}, - keywords = {agriculture and plastic,circular economy,European strategy on plastic,extended producer responsibility,fiscal measures,new plastics economy}, - file = {/Users/fabio/Zotero/storage/FEM3VHP3/Pazienza y De Lucia - 2020 - The EU policy for a plastic economy Reflections o.pdf;/Users/fabio/Zotero/storage/7HC9IAZP/bse.html} -} - -@article{Pearce2009, - title = {Overcoming Technical Constraints for Obtaining Sustainable Development with Open Source Appropriate Technology}, - author = {Pearce, Joshua M. and Mushtaq, Usman}, - year = {2009}, - journal = {TIC-STH'09: 2009 IEEE Toronto International Conference - Science and Technology for Humanity}, - number = {June}, - pages = {814--820}, - doi = {10.1109/TIC-STH.2009.5444388}, - abstract = {Open source appropriate technology (OSAT) refers to technologies that provide for sustainable development while being designed in the same fashion as free and open-source software. Facilitated by advances in information technology software and hardware, new ways to disseminate information such as wikis and Internet-enabled mobile phones, the global development of OSAT has emerged as a reality. This paper shows the sharing of design processes, appropriate tools, and technical information is enables more effective and rapid development of appropriate technologies for both industrialized and nonindustrialized regions. This sharing will require the appropriate technology community to adopt open standards/licenses, document knowledge, and build on previous work. This paper offers solutions in the form of both business models and tools to overcome technical constraints of OSAT development in the forms of the platforms necessary on which to share and build knowledge about appropriate technologies. These solutions are open, easily accessible for those in need, have a low barrier to entry for both users and information creators, and must be vetted in order to utilized as a trustworthy source on critical information needs. Current progress towards implementing these solutions will be reviewed and recommendations will be made to further increase the rate of OSAT development.}, - isbn = {9781424438785}, - keywords = {Appropriate technology,Communication,Development,Information technology,Open design,Open hardware,Open source,Open source appropriate technology,OSAT,Sustainability,Sustainable development,Wiki}, - file = {/Users/fabio/Zotero/storage/7B5B3X83/Overcoming Technical Constraints for ObtainingSustainable Development with Open SourceAppropriate Technology.pdf} -} - -@article{Pearce2010, - title = {3-{{D Printing}} of {{Open Source Appropriate Technologies}} for {{Self-Directed Sustainable Development}}}, - author = {Pearce, Joshua .M. and Morris Blair, Christine and Laciak, Kristen J. and Andrews, Rob and Nosrat, Amir and {Zelenika-Zovko}, Ivana}, - year = {2010}, - month = nov, - journal = {Journal of Sustainable Development}, - volume = {3}, - number = {4}, - pages = {17--29}, - issn = {1913-9071}, - doi = {10.5539/jsd.v3n4p17}, - abstract = {The technological evolution of the 3-D printer, widespread internet access and inexpensive computing has made a new means of open design capable of accelerating self-directed sustainable development. This study critically examines how open source 3-D printers, such as the RepRap and Fab@home, enable the use of designs in the public domain to fabricate open source appropriate technology (OSAT), which are easily and economically made from readily available resources by local communities to meet their needs. The current capabilities of open source 3-D printers is reviewed and a new classification scheme is proposed for OSATs that are technically feasible and economically viable for production. Then, a methodology for quantifying the properties of printed parts and a research trajectory is outlined to extend the existing technology to provide complete village-level fabrication of OSATs. Finally, conclusions are drawn on the potential for open source 3-D printers to assist in driving sustainable development.}, - keywords = {appropriate technology,local manufacturing,open design,open source,open source appropriate,peer to peer production,self-reliance,sustainable development,technology}, - file = {/Users/fabio/Zotero/storage/SBYDSLS4/Pearce et al. - 2010 - 3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development.pdf} -} - -@article{Pearce2012a, - title = {Materials Science. {{Building}} Research Equipment with Free, Open-Source Hardware.}, - author = {Pearce, Joshua M}, - year = {2012}, - month = sep, - journal = {Science (New York, N.Y.)}, - volume = {337}, - number = {6100}, - eprint = {22984059}, - eprinttype = {pubmed}, - pages = {1303--4}, - issn = {1095-9203}, - doi = {10.1126/science.1228183}, - urldate = {2014-02-21}, - pmid = {22984059}, - keywords = {Computer-Aided Design,Computers,DNA,DNA: isolation \& purification,Equipment Design,Printing,Research,Research: economics,Research: instrumentation,Software}, - file = {/Users/fabio/Zotero/storage/V97LSWCS/Materials science. Building research equipment with free, open-source hardware.pdf} -} - -@article{Pearce2012b, - title = {The Case for Open Source Appropriate Technology}, - author = {Pearce, Joshua M.}, - year = {2012}, - month = jan, - journal = {Environment, Development and Sustainability}, - volume = {14}, - number = {3}, - pages = {425--431}, - issn = {1387-585X}, - doi = {10.1007/s10668-012-9337-9}, - urldate = {2014-08-08}, - file = {/Users/fabio/Zotero/storage/628P69SJ/Pearce - 2012 - The case for open source appropriate technology.pdf} -} - -@incollection{Pearce2014k, - title = {Open-{{Source Lab}}}, - booktitle = {Open-{{Source Lab}}}, - author = {Pearce, Joshua M}, - year = {2014}, - pages = {95--162}, - publisher = {{Elsevier}}, - doi = {10.1016/B978-0-12-410462-4.00005-6}, - file = {/Users/fabio/Zotero/storage/2ZPCQRCC/Pearce - 2014 - Open-Source Lab(10).pdf} -} - -@article{Pearce2015, - title = {A Novel Approach to Obviousness: {{An}} Algorithm for Identifying Prior Art Concerning 3-{{D}} Printing Materials}, - author = {Pearce, Joshua M.}, - year = {2015}, - month = sep, - journal = {World Patent Information}, - volume = {42}, - pages = {13--18}, - publisher = {{Elsevier Ltd}}, - issn = {01722190}, - doi = {10.1016/j.wpi.2015.07.003}, - abstract = {With the development and commercialization of the recyclebot (plastic extruders that fabricate 3-D printing filament from recycled or virgin materials) and various syringe pump designs for self-replicating rapid prototypers (RepRaps), the material selection available for consumers who produce products using 3-D printers is expanding rapidly. This paper provides an open-source algorithm for identifying prior art for 3-D printing materials. Specifically this paper provides a new approach for determining obviousness in this technology area. The potential ramifications on both innovation and patent law in the 3-D printing technological space are discussed.}, - keywords = {3-D ink,3-D printer filament,3-D printing,Additive manufacturing,Intellectual monopoly,Intellectual property,Libre,Materials,Open source,Open source materials,Prior art,Public domain}, - file = {/Users/fabio/Zotero/storage/H44YHWL8/Pearce - 2015 - A novel approach to obviousness An algorithm for identifying prior art concerning 3-D printing materials.pdf} -} - -@article{Pearce2015a, - title = {Organic {{Farming Applications}} of {{Open Source}} 3-{{D Printing}} on {{Small Farms}}}, - author = {Pearce, Joshua M}, - year = {2015}, - journal = {Organic Farming}, - volume = {1}, - number = {1}, - pages = {19--35}, - issn = {2297-6485}, - doi = {10.12924/of2015.01010019}, - abstract = {There is growing evidence that low-cost open-source 3-D printers can reduce costs by enabling distributed manufacturing of substitutes for both specialty equipment and conventional mass-manufactured products. The rate of 3-D printable designs under open licenses is growing exponentially and there are already hundreds of designs applicable to small-scale organic farming. It has also been hypothesized that this technology could assist sustainable development in rural communities that rely on small-scale organic agriculture. To gauge the present utility of open-source 3-D printers in this organic farm context both in the developed and developing world, this paper reviews the current open-source designs available and evaluates the ability of low-cost 3-D printers to be effective at reducing the economic costs of farming. This study limits the evaluation of open-source 3-D printers to only the most-developed fused filament fab-rication of the bioplastic polylactic acid (PLA). PLA is a strong biodegradable and recyclable thermoplastic appropriate for a range of representative products, which are grouped into five categories of prints: hand tools, food processing, animal management, water management and hydroponics. The advantages and shortcomings of applying 3-D printing to each technology are evaluated. The results show a generalizable technical viability and economic benefit to adopting open-source 3-D printing for any of the technologies, although the individual economic impact is highly dependent on needs and frequency of use on a specific farm. Capital costs of a 3-D printer may be saved from on-farm printing of a single advanced analytical instrument in a day or replacing hundreds of inexpensive products over a year. In order for the full potential of open-source 3-D printing to be realized to assist organic farm economic resiliency and self-sufficiency, future work is outlined in five core areas: designs of 3-D printable objects, 3-D printing materials, 3-D printers, software and 3-D printable repositories.}, - keywords = {3-D printing,agricultural tools,distributed manufacturing,farm equipment,intensive agricul-ture,small farms}, - file = {/Users/fabio/Zotero/storage/IM7LI7UU/Applications of Open Source 3D Printing on Small Farms (2015).pdf} -} - -@article{Pearce2015b, - title = {Quantifying the {{Value}} of {{Open Source Hard-ware Development}}}, - author = {Pearce, Joshua M.}, - year = {2015}, - journal = {Modern Economy}, - volume = {06}, - number = {01}, - pages = {1--11}, - issn = {2152-7245}, - doi = {10.4236/me.2015.61001}, - abstract = {With the maturation of digital manufacturing technologies like 3-D\textbackslash r\textbackslash nprinting, a new paradigm is emerging of distributed manufacturing in both\textbackslash r\textbackslash nscientific equipment and consumer goods. Hardware released under free licenses\textbackslash r\textbackslash nis known as free and open source hardware (FOSH). The availability of these\textbackslash r\textbackslash nFOSH designs has a large value to those with access to digital manufacturing methods\textbackslash r\textbackslash nand particularly for scientists with needs for highly-customized low-volume\textbackslash r\textbackslash nproduction products. It is challenging to use traditional funding models to\textbackslash r\textbackslash nsupport the necessary investment of resources in FOSH development because of\textbackslash r\textbackslash nthe difficulty in quantifying the value of the result. In order to overcome\textbackslash r\textbackslash nthat challenge and harvest the current opportunity in both low-cost scientific\textbackslash r\textbackslash nequipment and consumer products, this article evaluates the following methods\textbackslash r\textbackslash nto quantify the value of FOSH design including: 1) downloaded substitution\textbackslash r\textbackslash nvaluation; 2) avoided reproduction valuation and 3) market savings valuation\textbackslash r\textbackslash nalong with additional benefits related to market expansion, scientific\textbackslash r\textbackslash ninnovation acceleration, educational enhancement and medical care improvement.\textbackslash r\textbackslash nThe strengths and weaknesses of these methods are analyzed and the results show\textbackslash r\textbackslash nthat the methods are relatively straight-forward to institute, based on\textbackslash r\textbackslash nreliable freely-available data, and that they minimize assumptions. A case\textbackslash r\textbackslash nstudy of a syringe pump with numerous scientific and medical applications is\textbackslash r\textbackslash npresented. The results found millions of dollars of economic value from a\textbackslash r\textbackslash nrelatively simple scientific device being released under open-licenses\textbackslash r\textbackslash nrepresenting orders of magnitude increase in value from conventional\textbackslash r\textbackslash nproprietary development. The inescapable conclusion of this study is that FOSH\textbackslash r\textbackslash ndevelopment should be funded by organizations interested in maximizing return\textbackslash r\textbackslash non public investments particularly in technologies associated with science,\textbackslash r\textbackslash nmedicine and education.}, - isbn = {doi:10.4236/me.2015.61001}, - keywords = {1-11,10,2015,4236,6,61001,doi,dx,free and open source,how to cite this,http,j,m,me,modern econo-,my,open hardware,{Open Hardware, Free and Open Source Software, Posi},open source hardware development,org,paper,pearce,positive externalities,quantifying the value of,software,valuation,value}, - file = {/Users/fabio/Zotero/storage/5SBSPDZR/Quantifying the Value of Open Source Hard-ware Development (2015).pdf} -} - -@article{Pearce2016, - ids = {Pearce2016a}, - title = {Return on Investment for Open Source Scientific Hardware Development}, - author = {Pearce, J. M.}, - year = {2016}, - journal = {Science and Public Policy}, - volume = {43}, - number = {2}, - pages = {192--195}, - issn = {03023427}, - doi = {10.1093/scipol/scv034}, - abstract = {The availability of free and open source hardware designs that can be replicated with low-cost 3D printers provides large values to scientists who need highly-customized low-volume production scientific equipment. Digital manufacturing technologies have only recently become widespread and the return on investment (ROI) was not clear, so funding for open hardware development was historically sparse. This paper clarifies a method for determining an ROI for the development of sci- entific free and open source hardware (FOSH). By using an open source hardware design that can be manufactured digitally, the relatively minor development costs result in enormous ROIs for the scientific community. A case study is presented of a syringe pump released under open license, which results in ROIs for funders ranging from hundreds to thousands of percent after only a few months. It is clear that policies encouraging FOSH scientific hardware development should be adopted by organizations interested in maximizing return on public investments for science.}, - keywords = {Free and open source hardware,Free hardware,Open hardware,Open source,Return on investment,Science policy}, - file = {/Users/fabio/Zotero/storage/7EZZUB2F/Return on Investment for Open Source Hardware Development (2015).pdf} -} - -@article{Pearce2017, - title = {Emerging Business Models for Open Source Hardware}, - author = {Pearce, Joshua M.}, - year = {2017}, - journal = {J. Open Hardw.}, - volume = {1}, - number = {1}, - doi = {10.5334/joh.4}, - abstract = {{$<$}p class="p1"{$>$}The rise of Free and Open Source models for software development has catalyzed the growth of Free and Open Source hardware (also known as ``Libre Hardware''). Libre Hardware is gaining significant traction in the scientific hardware community, where there is evidence that open development creates both technically superior and far less expensive scientific equipment than proprietary models. In this article, the evidence is reviewed and a collection of examples of business models is developed to service scientists who have the option to manufacture their own equipment using Open Source designs. Profitable Libre Hardware business models are reviewed, which includes kit, specialty component, and calibration suppliers for makers. The results indicate that Libre Hardware businesses should target technically sophisticated customers first and, as usability matures, target expanded markets of conventional consumers.{$<$}/p{$>$}}, - keywords = {1,business models,business of open source,can you make a,innovation,libre hardware,open source,open source hardware}, - file = {/Users/fabio/Zotero/storage/EQDVQTET/Pearce_2017_Emerging business models for open source hardware.pdf} -} - -@incollection{Pearce2017a, - title = {Life-{{Cycle Analysis}} of {{Distributed Manufacturing}}}, - booktitle = {Encyclopedia of {{Sustainable Technologies}}}, - author = {Pearce, Joshua M.}, - year = {2017}, - pages = {439--446}, - publisher = {{Elsevier}}, - doi = {10.1016/B978-0-12-409548-9.10222-2} -} - -@article{Pearce2017b, - title = {Impacts of Open Source Hardware in Science and Engineering}, - author = {Pearce, Joshua M.}, - year = {2017}, - journal = {Bridge}, - volume = {47}, - number = {3}, - pages = {24--31}, - issn = {07376278}, - file = {/Users/fabio/Zotero/storage/XG4UNCVW/Impacts of open source hardware in science and engineering.pdf} -} - -@article{Pearce2018, - ids = {Pearce2018a}, - title = {Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware}, - author = {Pearce, Joshua M.}, - year = {2018}, - journal = {Inventions}, - volume = {3}, - number = {3}, - pages = {1--11}, - issn = {24115134}, - doi = {10.3390/inventions3030044}, - abstract = {As a growing number of companies reject intellectual property (IP) monopoly-based business models to embrace libre product development of free and open source hardware and software, there is an urgent need to refurbish the instruments of university-corporate research partnerships. These partnerships generally use a proprietary standard research agreement (PSRA), which for historical reasons contains significant IP monopoly language and restrictions for both the company and the university. Such standard research agreements thus create an artificial barrier to innovation as both companies using a libre model and universities they wish to collaborate with must invest significantly to restructure the contracts. To solve this problem, this article provides a new Sponsored Libre Research Agreement (SLRA). The differences between the agreements are detailed. The advantages of using an SLRA are provided for any type of company and include: (1) minimizing research investments on reporting requirements; (2) reducing delays related to confidentiality and publication embargos; and (3) reducing both transaction and legal costs as well as research time losses associated with IP. Moving to libre agreements both speeds up and reduces costs for setting up collaborative research. Under the SLRA, university researchers can spend more time innovating for the same investment.}, - isbn = {1906487146}, - keywords = {FOSH,Free and open source hardware,Free and open source software,Open design,Open hardware,Open science,Open scientific hardware,OScH,P2P,P2P manufacturing,Sponsored research,Sponsored research agreement}, - file = {/Users/fabio/Zotero/storage/CEATF9BC/Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware.pdf} -} - -@article{Pearce2020a, - title = {Economic Savings for Scientific Free and Open Source Technology: {{A}} Review}, - author = {Pearce, Joshua M.}, - year = {2020}, - month = sep, - journal = {HardwareX}, - volume = {8}, - pages = {e00139}, - publisher = {{Elsevier}}, - issn = {24680672}, - doi = {10.1016/j.ohx.2020.e00139}, - urldate = {2020-09-12}, - abstract = {Both the free and open source software (FOSS) as well as the distributed digital manufacturing of free and open source hardware (FOSH) has shown particular promise among scientists for developing custom scientific tools. Early research found substantial economic savings for these technologies, but as the open source design paradigm has grown by orders of magnitude it is possible that the savings observed in the early work was isolated to special cases. Today there are examples of open source technology for science in the vast majority of disciplines and several resources dedicated specifically to publishing them. Do the tremendous economic savings observed earlier hold today? To answer that question, this study evaluates free and open source technologies in the two repositories compared to proprietary functionally-equivalent tools as a function of their use of Arduino-based electronics, RepRap-class 3-D printing, as well as the combination of the two. The results of the review find overwhelming evidence for a wide range of scientific tools, that open source technologies provide economic savings of 87\% compared to equivalent or lesser proprietary tools. These economic savings increased slightly to 89\% for those that used Arduino technology and even more to 92\% for those that used RepRap-class 3-D printing. Combining both Arduino and 3-D printing the savings averaged 94\% for free and open source tools over commercial equivalents. The results provide strong evidence for financial support of open source hardware and software development for the sciences. Given the overwhelming economic advantages of free and open source technologies, it appears financially responsible to divert funding of proprietary scientific tools and their development in favor of FOSH. Policies were outlined that provide nations with a template for strategically harvesting the opportunities provided by the free and open source paradigm.}, - keywords = {3-D printing,Custom designs,Customization,Distributed manufacturing,Economics,FOSH,FOSS,Free and open source,Free and open source software,Instrumentation,Libre hardware,Open design,Open hardware,Open innovation,Open science,Open science hardware,Open scientific hardware,Open source,Open source hardware,OScH,P2P,P2P manufacturing,RepRap,Science,Science finance,Science funding,Science policy,Scientific equipment,Scientific instruments}, - file = {/Users/fabio/Zotero/storage/YBJKWDIV/full-text.pdf} -} - -@article{Pearce2020a, - title = {A Review of Open Source Ventilators for {{COVID-19}} and Future Pandemics}, - author = {Pearce, Joshua M.}, - year = {2020}, - journal = {F1000Research}, - volume = {9}, - publisher = {{F1000 Research Ltd}}, - issn = {1759796X}, - doi = {10.12688/f1000research.22942.2}, - abstract = {Coronavirus Disease 2019 (COVID-19) threatens to overwhelm our medical infrastructure at the regional level causing spikes in mortality rates because of shortages of critical equipment, like ventilators. Fortunately, with the recent development and widespread deployment of small-scale manufacturing technologies like RepRap-class 3-D printers and open source microcontrollers, mass distributed manufacturing of ventilators has the potential to overcome medical supply shortages. In this study, after providing a background on ventilators, the academic literature is reviewed to find the existing and already openly-published, vetted designs for ventilators systems. These articles are analyzed to determine if the designs are open source both in spirit (license) as well as practical details (e.g. possessing accessible design source files, bill of materials, assembly instructions, wiring diagrams, firmware and software as well as operation and calibration instructions). Next, the existing Internet and gray literature are reviewed for open source ventilator projects and designs. The results of this review found that the tested and peer-reviewed systems lacked complete documentation and the open systems that were documented were either at the very early stages of design (sometimes without even a prototype) and were essentially only basically tested (if at all). With the considerably larger motivation of an ongoing pandemic, it is assumed these projects will garner greater attention and resources to make significant progress to reach a functional and easily-replicated system. There is a large amount of future work needed to move open source ventilators up to the level considered scientific-grade equipment, and even further work needed to reach medical-grade hardware. Future work is needed to achieve the potential of this approach by developing policies, updating regulations, and securing funding mechanisms for the development and testing of open source ventilators for both the current COVID19 pandemic as well as for future pandemics and for everyday use in low-resource settings.}, - pmid = {32411358}, - keywords = {COVID-19,Influenza pandemic,Medical hardware,Open hardware,Open source,Pandemic,Ventilation,Ventilator} -} - -@article{Pearce2020b, - ids = {Pearce2020}, - title = {Distributed {{Manufacturing}} of {{Open Source Medical Hardware}} for {{Pandemics}}}, - author = {Pearce, Joshua M.}, - year = {2020}, - month = may, - journal = {Journal of Manufacturing and Materials Processing}, - volume = {4}, - number = {2}, - pages = {49}, - issn = {2504-4494}, - doi = {10.3390/jmmp4020049}, - abstract = {Distributed digital manufacturing offers a solution to medical supply and technology shortages during pandemics. To prepare for the next pandemic, this study reviews the state-of-the-art of open hardware designs needed in a COVID-19-like pandemic. It evaluates the readiness of the top twenty technologies requested by the Government of India. The results show that the majority of the actual medical products have some open source development, however, only 15\% of the supporting technologies required to produce them are freely available. The results show there is still considerable research needed to provide open source paths for the development of all the medical hardware needed during pandemics. Five core areas of future research are discussed, which include (i) technical development of a wide-range of open source solutions for all medical supplies and devices, (ii) policies that protect the productivity of laboratories, makerspaces, and fabrication facilities during a pandemic, as well as (iii) streamlining the regulatory process, (iv) developing Good-Samaritan laws to protect makers and designers of open medical hardware, as well as to compel those with knowledge that will save lives to share it, and (v) requiring all citizen-funded research to be released with free and open source licenses.} -} - -@article{pearceProfessorsWantShare2022, - title = {Professors Want to Share: Preliminary Survey Results on Establishing Open-Source-Endowed Professorships}, - shorttitle = {Professors Want to Share}, - author = {Pearce, Joshua M. and Pascaris, Alexis S. and Schelly, Chelsea}, - year = {2022}, - month = sep, - journal = {SN Social Sciences}, - volume = {2}, - number = {10}, - pages = {203}, - issn = {2662-9283}, - doi = {10.1007/s43545-022-00524-3}, - urldate = {2022-09-26}, - abstract = {This study proposes a novel policy to provide incentives for open science: to offer open-source (OS)-endowed professorships. To hold an open-source-endowed chair, in addition to demonstrated excellence in their field, professors would need to agree to (1) ensuring all of their writing is distributed via open access in some way and (2) releasing all of their intellectual property in the public domain or under appropriate open-source licenses. The results of this survey study of university professors in the U.S. show that a super majority (86.7\%) of faculty respondents indicated willingness to accept an OS-endowed professorship, while only 13.3\% of respondents would not be willing to accept the terms of an OS-endowed professorship. The terms of accepting an OS-endowed professorship that were the most popular among respondents were increased salary, annual discretionary budget, as a term of tenure and annual RA or TA lines. More than a quarter of responding professors declared that no additional compensation would be needed for them to accept the terms of an OS-endowed professorship. The results demonstrate a clear willingness of academics to expand open access to science, which would hasten scientific progress while also making science more just and inclusive. It is clear that science funders have a large opportunity to move towards open science by offering open\textendash source-endowed chairs.}, - langid = {english}, - keywords = {Endowed chairs,Endowed professorships,Open access,Open science,Open source}, - file = {/Users/fabio/Zotero/storage/L22RG74P/Pearce et al_2022_Professors want to share.pdf} -} - -@article{pearceStrategicInvestmentOpen2022, - title = {Strategic {{Investment}} in {{Open Hardware}} for {{National Security}}}, - author = {Pearce, Joshua M.}, - year = {2022}, - month = apr, - journal = {Technologies}, - volume = {10}, - number = {2}, - pages = {53}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2227-7080}, - doi = {10.3390/technologies10020053}, - urldate = {2022-10-04}, - abstract = {Free and open-source hardware (FOSH) development has been shown to increase innovation and reduce economic costs. This article reviews the opportunity to use FOSH as a sanction to undercut imports and exports from a target criminal country. A formal methodology is presented for selecting strategic national investments in FOSH development to improve both national security and global safety. In this methodology, first the target country that is threatening national security or safety is identified. Next, the top imports from the target country as well as potentially other importing countries (allies) are quantified. Hardware is identified that could undercut imports/exports from the target country. Finally, methods to support the FOSH development are enumerated to support production in a commons-based peer production strategy. To demonstrate how this theoretical method works in practice, it is applied as a case study to a current criminal military aggressor nation, who is also a fossil-fuel exporter. The results show that there are numerous existing FOSH and opportunities to develop new FOSH for energy conservation and renewable energy to reduce fossil-fuel-energy demand. Widespread deployment would reduce the concomitant pollution, human health impacts, and environmental desecration as well as cut financing of military operations.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {climate change,energy conservation,energy policy,global safety,national security,open hardware,open source,photovoltaic,renewable energy,solar energy}, - file = {/Users/fabio/Zotero/storage/XVDCKH8J/Pearce_2022_Strategic Investment in Open Hardware for National Security.pdf;/Users/fabio/Zotero/storage/GVJIKKF9/53.html} -} - -@unpublished{pearceTeachingScienceEncouraging2019, - ids = {pearce2019a}, - title = {Teaching {{Science}} by {{Encouraging Innovation}} in {{Appropriate Technologies}} for {{Sustainable Development}}}, - author = {Pearce, Joshua}, - year = {2019}, - month = may, - urldate = {2022-10-14}, - abstract = {Appropriate technologies, those able to be easily and economically constructed from readily available materials by local craftspeople, have a central role in the alleviation of poverty in the developing world. Research and development of these technologies are, however, generally apportioned relatively modest support by the developed world's institutions in part because the operation of many of these appropriate technologies is dependent on relatively well-understood science accessible even to introductory college science and engineering students. This paper describes a project-based assignment utilized for two years that benefited from this opportunity to motivate students to learn both science and innovative problem-solving by offering them a chance to make concrete contributions to the optimization of appropriate technologies for sustainable development. The outcomes of this new method of service learning will be discussed. Finally, the advantages of applying this teaching methodology will be highlighted.}, - file = {/Users/fabio/Zotero/storage/J6SGFTXC/Pearce - 2019 - Teaching Science by Encouraging Innovation in Appr.pdf} -} - -@article{PedersenZari2019, - title = {Ecosystem Services Impacts as Part of Building Materials Selection Criteria}, - author = {Pedersen Zari, Maibritt}, - year = {2019}, - journal = {Materials Today Sustainability}, - volume = {3--4}, - issn = {25892347}, - doi = {10.1016/j.mtsust.2019.100010}, - urldate = {2021-07-21}, - abstract = {The built environment is responsible for large negative ecological impacts due in part to the vast amount of materials used in construction. Concurrently, construction and demolition activities result in vast amounts of materials being buried, burnt, and dumped. It is essential therefore to analyze the impact of building materials acquisition, use, and transformation on the ecosystems people inhabit and rely upon for well-being. Typically, this is examined in terms of material use, energy use, and emission of pollutants including greenhouse gases. The impacts various materials have on complex and interconnected networks of ecosystem services are rarely considered. In light of this, this article introduces the concept of ecosystem services in relation to selecting materials for the construction of the built environment. A methodology for applying ecosystem services analysis to building materials specification is presented, and a series of example matrices that examine a selection of materials that are grown, extracted, or made are provided. The article concludes that the potential for positive change in terms of the ecological impact related to building materials across their lifecycles and in how built environments and the materials within them are designed, specified, valued, built, and used is apparent if an understanding of ecosystem services is integrated into built environment materials selection.}, - isbn = {2019.100010}, - keywords = {Ecological impacts,Ecosystem services,Ecosystem services analysis,Environmental impact,Materials selection,Regenerative design}, - file = {/Users/fabio/Zotero/storage/3BBAFFZ7/full-text.pdf} -} - -@article{pedraza-rodriguezStrategiesInnovationEmpirical2020, - title = {From Strategies to Innovation: An Empirical Study from {{Spain}}}, - author = {{Pedraza-Rodr{\'i}guez}, Jos{\'e} A. and Bolcha, Peter and {Santos-Rold{\'a}n}, Luna}, - year = {2020}, - journal = {Technology Analysis and Strategic Management}, - pages = {1--14}, - publisher = {{Routledge}}, - issn = {14653990}, - doi = {10.1080/09537325.2020.1795112}, - urldate = {2020-08-09}, - abstract = {Innovation is a necessary condition to succeed in the market. Having literature on innovation and business strategy as a basis, this paper investigates the associations between organisational strategies, management, general company characteristics and the results of innovation. A survey was conducted among executive positions and those responsible for the R\&D departments in Spanish companies that have had a contractual relationship with the main public research organisation, the Spanish National Research Council. Based on this data gained from 794 companies, we employ a multiple regression analysis and find statistically significant relationships between managerial/organisational characteristics and the outputs of innovation. The findings of this research suggest that the innovativeness of firms depends on management strategies that support and promote the contribution of new ideas, interdepartmental work teams, or conducting market research, being this style of profile positively associated with business innovation outputs. Thus, we extend the evidence brought by previous research by bringing a new specific case from Spain and, more importantly, by combining all the above-mentioned factors together.}, - keywords = {Business \& management Studies,business and corporate strategy,firm,innovation strategy} -} - -@inproceedings{Peeters2011, - title = {Experiential {{Design Landscapes}} : {{Design Research}} in the {{Wild}}}, - booktitle = {E. {{Brandt}}, {{P}}. {{Ehn}}, {{T}}. {{Johansson}}, {{T}}. {{D}}. {{Johansson}}, {{M}}. {{Hellstr\"om Reimer}}, {{T}}. {{Markussen}} \& {{A}}. {{Vallg\aa rda}} ({{Eds}}.), {{Proceedings}} of the {{Nordic Design Research Conference}}}, - author = {Peeters, Michel M R and Meegens, Carl J P G and IJsselsteijn, W A and Hummels, C C M and Brombacher, A C}, - year = {2011}, - pages = {422--425}, - address = {{Copenhagen- Malm\"o}} -} - -@article{Peeters2019, - title = {A Barrier Analysis for Distributed Recycling of {{3D}} Printing Waste: {{Taking}} the Maker Movement Perspective}, - author = {Peeters, Bob and Kiratli, Nadine and Semeijn, Janjaap}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {241}, - pages = {118313}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118313}, - file = {/Users/fabio/Zotero/storage/2Q3CH2RU/A barrier analysis for distributed recycling of 3D printing waste- Taking the maker movement perspective.pdf} -} - -@article{pegelsAligningRecyclingBehaviors2022, - title = {Aligning Recycling Behaviors and the Recycling System \textendash{} {{Towards}} a Full Cycle of Materials and Behavioral Methods}, - author = {Pegels, Anna and Casta{\~n}eda, Jorge Luis and Humphreys, Carolina and K{\"o}tter, Caroline and Negre, Mario and Weidner, Christian and Kutzner, Florian}, - year = {2022}, - month = feb, - journal = {Waste Management}, - volume = {138}, - pages = {1--7}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.11.021}, - urldate = {2021-11-30} -} - -@article{Pel2020, - title = {Between Innovation and Restoration; towards a Critical-Historicizing Understanding of Social Innovation Niches}, - author = {Pel, Bonno and Kemp, Ren{\'e}}, - year = {2020}, - month = apr, - journal = {Technology Analysis and Strategic Management}, - pages = {1--13}, - publisher = {{Routledge}}, - issn = {14653990}, - doi = {10.1080/09537325.2020.1750588}, - urldate = {2020-04-16}, - abstract = {Social innovation (SI) is gaining attention as an innovation category. However, the SI concept proves vulnerable to stereotypical understandings. Next to the radically novel, diffusion-oriented and thereby manifestly innovative social `niches', it is important to also acknowledge the rather latent SI phenomena of restoration and shielding. This paper therefore develops a critical-historicizing perspective that highlights the social construction of innovations in social relations. Building on scholarship in Strategic Niche Management, grassroots innovation and critical innovation studies, four `shapes of social innovation' are distinguished. Substantiating and deepening this conceptual classification through empirical evidence on 20 SI initiatives, the analysis highlights how social innovations may take on several of the theorised appearances throughout their existence in society (shapeshifting). Disclosing overlooked SI phenomena, this critical-historicizing understanding informs more comprehensive and balanced SI research and practice.}, - keywords = {innovation history,reinvention,Social innovation,Strategic niche Management} -} - -@article{pelTheoryTransformativeSocial2020, - ids = {Pel2020}, - title = {Towards a Theory of Transformative Social Innovation: {{A}} Relational Framework and 12 Propositions}, - author = {Pel, Bonno and Haxeltine, Alex and Avelino, Flor and Dumitru, Adina and Kemp, Ren{\'e} and Bauler, Tom and Kunze, Iris and Dorland, Jens and Wittmayer, Julia and J{\o}rgensen, Michael S{\o}gaard}, - year = {2020}, - month = oct, - journal = {Research Policy}, - volume = {49}, - number = {8}, - pages = {104080}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104080}, - urldate = {2020-08-09}, - abstract = {This paper responds to the need in innovation research for conceptual clarity and solid theory on social innovation (SI). The paper conceptualizes SI as changing social relations, involving new ways of doing, knowing, framing and organizing, and theorizes transformative social innovation (TSI) as the process of SI challenging, altering, or replacing dominant institutions in a specific social-material context. Three advances towards TSI theory are proposed. First, we reflect epistemologically on the challenges of theory-building, and propose an appropriate research design and methodology. Middle-range theory is developed through iteration between theoretical insights and comparative empirical study of 20 transnational SI networks and about 100 associated initiatives. Second, we synthesize various innovation theories and social theories into a relational framework that articulates the distributed agency and institutional hybridization involved. Third, we formulate twelve propositions on the emergence of SI initiatives, on the development of SI ecosystems, on institutionalization processes, and on the historical shaping of SI. The paper ends with a critical assessment of the advances made, also identifying further challenges for TSI theory and practice.}, - keywords = {Empowerment,Innovation process,Institutional change,Relational theory,Social innovation,Transformative change}, - file = {/Users/fabio/Zotero/storage/35YR3A6T/Pel et al_2020_Towards a theory of transformative social innovation.pdf} -} - -@article{Pelzer2019, - title = {Imagination for Change: The {{Post-Fossil City Contest}}}, - author = {Pelzer, Peter and Versteeg, Wytske}, - year = {2019}, - journal = {Futures}, - number = {April 2018}, - pages = {1--15}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.01.005}, - keywords = {Cities,Climate change,Energy transition,Experiential futures,Imaginative logics,Post-fossil futures,Speculative design}, - file = {/Users/fabio/Zotero/storage/7RGSJYCR/Imagination for change- The Post-Fossil City Contest.pdf} -} - -@article{Peng2018, - title = {Sustainability of Additive Manufacturing: {{An}} Overview on Its Energy Demand and Environmental Impact}, - author = {Peng, Tao and Kellens, Karel and Tang, Renzhong and Chen, Chao and Chen, Gang}, - year = {2018}, - month = may, - journal = {Additive Manufacturing}, - volume = {21}, - number = {June 2017}, - pages = {694--704}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2018.04.022}, - abstract = {Additive Manufacturing (AM) has been rapidly developing over the last decade. It shows great potential in reducing the need for energy- and resource-intensive manufacturing processes, which in turn reduces the amount of material required in the supply chain, and enables more environmentally benign practices. However, the question of how to realize these potential benefits has received little attention. This paper aims to provide an overview of the Sustainability of Additive Manufacturing (SAM). The context of the SAM is introduced, with a focus on energy and environmental impacts. Resource consumption is identified as the most important aspect. Examination from a life cycle perspective is also presented, with explicit discussions on opportunities to reduce energy and material consumption through design, material preparation, manufacturing, usage, and end-of-life treatment. Statistical data analysis provides an overview of impact forecasts, highlighting the importance of and need for thorough research on sustainability. The eco-design concept enabled by AM is identified as the most promising and effective technology, further extending and completing its design capability. This also determines the opportunities for energy and environmental optimization in subsequent processes. Most existing research is in process- and system-specific modeling, and few AM processes and systems have been studied, with generally premature conclusions. General models for each type of AM process are still necessary. Lastly, five research priorities are suggested: improve systematic data integration and management, correlate energy and quality, develop intelligent machinery, focus on material preparation and recycling, and discover innovative applications using AM.}, - keywords = {Additive manufacturing,Energy consumption,Environmental impact,Resource consumption,Sustainable manufacturing}, - file = {/Users/fabio/Zotero/storage/PVZFVTE4/Sustainability of additive manufacturing- An overview on its energy demand and environmental impact.pdf} -} - -@article{Peng2019, - title = {Scaling Urban Sustainability Experiments: {{Contextualization}} as an Innovation}, - author = {Peng, Yuan and Wei, Yujian and Bai, Xuemei}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {227}, - pages = {302--312}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.061}, - urldate = {2020-05-21}, - abstract = {Research shows urban sustainability experiments are critical for sustainability transition in cities and beyond, especially when they are multiplied in other contexts and upscaled. Even with a growing body of literature on sustainability experiments, little is known on how these experiments travel to and are contextualized in other contexts. Here we attempt to fill this gap, taking the adoption and proliferation of Energy Performance Contracting (EPC)in Shanghai as a case study. First, based on the system innovation literature, we identify the critical components that characterize the innovative practices. We then examine the contextualization process of EPC in Shanghai using this characterization. Finally, we identify and compare some innovative elements that emerged during the contextualization with those in the original contexts from which Shanghai learned. We argue that post experiment adoption and contextualization requires mobilization and realignments of actors, resources, and institutional arrangements within the process of learning, which involves much more than simple duplication and often with distinctive outcomes, thus in many ways is an innovation in itself. Innovation in post experiment contextualization is supported by various ``horizontal linkages'' with the original experiment, which include information/knowledge transfer and learning via actor interactions across experiments, but the focus of learning shifts from external (i.e. from the original context)to internal (i.e. within the new context)during the contextualization process. These findings contribute to an in-depth understanding of how innovation can transfer across cases, which is a significant gap in current system innovation literature, and may inform practice in terms of how to facilitate the scaling of experiments to achieve sustainability transitions.}, - keywords = {Contextualization,Endogenous innovation,Horizontal linkage,Realignment processes,Sustainability transition,Urban sustainability experiment} -} - -@article{pengAdditiveManufacturingenabledDesign2020, - title = {Additive Manufacturing-Enabled Design, Manufacturing, and Lifecycle Performance}, - author = {Peng, Tao and Zhu, Yi and Leu, Ming and Bourell, David}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101646}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101646}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/H7HCPX87/full-text.pdf} -} - -@article{Penning1993, - title = {Preparation and Properties of Absorbable Fibres from L-Lactide Copolymers}, - author = {Penning, J.P and Dijkstra, H and Pennings, a.J}, - year = {1993}, - month = mar, - journal = {Polymer}, - volume = {34}, - number = {5}, - pages = {942--951}, - issn = {00323861}, - doi = {10.1016/0032-3861(93)90212-S}, - keywords = {copolymers,crystallinity,fibres,l-laetide,preparation,properties}, - file = {/Users/fabio/Zotero/storage/NWLHXPTR/Penning, Dijkstra, Pennings - 1993 - Preparation and properties of absorbable fibres from l-lactide copolymers.pdf} -} - -@article{penningtonLifeCycleAssessment2004, - title = {Life Cycle Assessment {{Part}} 2: {{Current}} Impact Assessment Practice}, - shorttitle = {Life Cycle Assessment {{Part}} 2}, - author = {Pennington, D. W. and Potting, J. and Finnveden, G. and Lindeijer, E. and Jolliet, O. and Rydberg, T. and Rebitzer, G.}, - year = {2004}, - month = jul, - journal = {Environment International}, - volume = {30}, - number = {5}, - pages = {721--739}, - issn = {0160-4120}, - doi = {10.1016/j.envint.2003.12.009}, - urldate = {2022-09-13}, - abstract = {Providing our society with goods and services contributes to a wide range of environmental impacts. Waste generation, emissions and the consumption of resources occur at many stages in a product's life cycle\textemdash from raw material extraction, energy acquisition, production and manufacturing, use, reuse, recycling, through to ultimate disposal. These all contribute to impacts such as climate change, stratospheric ozone depletion, photooxidant formation (smog), eutrophication, acidification, toxicological stress on human health and ecosystems, the depletion of resources and noise\textemdash among others. The need exists to address these product-related contributions more holistically and in an integrated manner, providing complimentary insights to those of regulatory/process-oriented methodologies. A previous article (Part 1, Rebitzer et al., 2004) outlined how to define and model a product's life cycle in current practice, as well as the methods and tools that are available for compiling the associated waste, emissions and resource consumption data into a life cycle inventory. This article highlights how practitioners and researchers from many domains have come together to provide indicators for the different impacts attributable to products in the life cycle impact assessment (LCIA) phase of life cycle assessment (LCA).}, - langid = {english}, - keywords = {Emission,Life cycle assessment,Waster generation}, - file = {/Users/fabio/Zotero/storage/6JSEJYMU/S0160412003002551.html} -} - -@article{Peoples2016, - title = {Twitter Predicts Citation Rates of Ecological Research}, - author = {Peoples, Brandon K. and Midway, Stephen R. and Sackett, Dana and Lynch, Abigail and Cooney, Patrick B.}, - year = {2016}, - month = nov, - journal = {PLoS ONE}, - volume = {11}, - number = {11}, - pages = {e0166570}, - publisher = {{Public Library of Science}}, - issn = {19326203}, - doi = {10.1371/journal.pone.0166570}, - urldate = {2022-01-17}, - abstract = {The relationship between traditional metrics of research impact (e.g., number of citations) and alternative metrics (altmetrics) such as Twitter activity are of great interest, but remain imprecisely quantified. We used generalized linear mixed modeling to estimate the relative effects of Twitter activity, journal impact factor, and time since publication on Web of Science citation rates of 1,599 primary research articles from 20 ecology journals published from 2012-2014. We found a strong positive relationship between Twitter activity (i.e., the number of unique tweets about an article) and number of citations. Twitter activity was a more important predictor of citation rates than 5-year journal impact factor. Moreover, Twitter activity was not driven by journal impact factor; the 'highest-impact' journals were not necessarily the most discussed online. The effect of Twitter activity was only about a fifth as strong as time since publication; accounting for this confounding factor was critical for estimating the true effects of Twitter use. Articles in impactful journals can become heavily cited, but articles in journals with lower impact factors can generate considerable Twitter activity and also become heavily cited. Authors may benefit from establishing a strong social media presence, but should not expect research to become highly cited solely through social media promotion. Our research demonstrates that altmetrics and traditional metrics can be closely related, but not identical. We suggest that both altmetrics and traditional citation rates can be useful metrics of research impact.}, - pmid = {27835703}, - keywords = {Altmetrics,Bibliometrics,Citation analysis,Conservation science,Ecology,Scientific publishing,Social media,Twitter}, - file = {/Users/fabio/Zotero/storage/7QRVB47T/full-text.pdf} -} - -@article{Pepi2018, - title = {Towards {{Expeditionary Battlefield Manufacturing Using Recycled}}, {{Reclaimed}}, and {{Scrap Materials}}}, - author = {Pepi, Marc and Zander, Nicole and Gillan, Margaret}, - year = {2018}, - month = oct, - journal = {JOM}, - volume = {70}, - number = {10}, - pages = {2359--2364}, - publisher = {{Springer US}}, - issn = {1047-4838}, - doi = {10.1007/s11837-018-3040-8}, - abstract = {Reprinted from the RAPID + TCT 2017 Proceedings; 2017 May 8\textendash 11; Pittsburgh, PA. p. 1\textendash 23. Approved for public release; distribution is unlimited.}, - file = {/Users/fabio/Zotero/storage/Q6YQ2PVM/Towards Expeditionary Battlefield Manufacturing Using Recycled, Reclaimed, and Scrap Materials.pdf} -} - -@article{percocoAnalyticalModelPredict2020, - title = {Analytical Model to Predict the Extrusion Force as a Function of the Layer Height, in Extrusion Based 3d Printing}, - author = {Percoco, Gianluca and Arleo, Luca and Stano, Gianni and Bottiglione, Francesco}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - pages = {101791}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101791}, - urldate = {2020-12-21} -} - -@article{pereaDigitalSobrietyAwareness2023, - title = {Digital Sobriety: {{From}} Awareness of the Negative Impacts of {{IT}} Usages to Degrowth Technology at Work}, - shorttitle = {Digital Sobriety}, - author = {P{\'e}r{\'e}a, C{\'e}line and G{\'e}rard, Jessica and {de Benedittis}, Julien}, - year = {2023}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {194}, - pages = {122670}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122670}, - urldate = {2023-07-06}, - abstract = {The rise of digital technologies has led to growing concern over their environmental impact, prompting the emergence of the phenomenon of digital sobriety. Rooted in the principles of degrowth technology, digital sobriety advocates for reduced technology usage to create a more sustainable society. However, it contrasts with typical frameworks that promote the continued use of IT. Furthermore, it runs counter to the prevailing trend of digital transformation within organisations, which is expected to expand in the future. As a result, it challenges conventional approaches to IT usage and the associated contextual factors. The purpose of this paper is to investigate the concept of digital sobriety, examining its relationship to conventional approaches as well as the degrowth technology perspective. The study explores how digital sobriety is implemented within organisations and how it is perceived by IT users. Thirty-three participants from IT companies were included and the scope and characteristics of the phenomenon of digital sobriety were identified, including five levels of IT user maturity: refutation, inaction, substitution, optimisation, and disadoption/degrowth. The results highlight the need to balance the internal and external factors of digital sobriety and identify different trajectories of digital sobriety as socio-technical imaginaries for the future of IT.}, - langid = {english}, - keywords = {Degrowth technology,Digital carbon footprint,Digital sobriety,Green IT,IT uses,Socio-technical imaginaries}, - file = {/Users/fabio/Zotero/storage/E43K66JV/S0040162523003554.html} -} - -@article{Pereira2009, - title = {Sustainability: {{An}} Integral Engineering Design Approach}, - author = {Pereira, Tony}, - year = {2009}, - journal = {Renewable and Sustainable Energy Reviews}, - volume = {13}, - number = {5}, - pages = {1133--1137}, - issn = {13640321}, - doi = {10.1016/j.rser.2008.05.003}, - abstract = {The work described in this paper won an Engineering Award from the UNESCO and the United Nations. It qualified among the top 30 finalists from a pool of about 3200 engineering entries from the world's most prestigious universities in 89 countries, including Cambridge, Oxford, MIT, Stanford and Yale. This paper describes the methods employed in a sustainability project titled 'Global Basic Needs in an Integrated Sustainable Approach' submitted by the author to the UNESCO in agreement with the United Nations Millennium Goals and within their framework of the Mondialogo Engineering Award. A six-nation international jury of renowned leading scientists and engineers selected this project for a nomination award. While we all anxiously wait for science to provide the solutions to global warming and catastrophic climate change, a holistic engineering approach was used to halt pollution, and to provide sustainable shelter, clean water, energy, food and education to the global population. This approach can be used anywhere in the world and conceptualizes a revolutionary sustainability paradigm for present and future societies. This work is a contribution to the advancement of the science of sustainability everywhere on the planet. ?? 2008 Elsevier Ltd. All rights reserved.}, - isbn = {1364-0321}, - keywords = {Appropriate engineering,Mondialogo,Organic,Renewable,Solar energy,Sustainability}, - file = {/Users/fabio/Zotero/storage/N3WCJA2N/Sustainability An integral engineering design approach.pdf} -} - -@article{Pereira2020, - title = {Transformative Spaces in the Making: Key Lessons from Nine Cases in the {{Global South}}}, - author = {Pereira, Laura and Frantzeskaki, Niki and Hebinck, Aniek and {Charli-Joseph}, Lakshmi and Drimie, Scott and Dyer, Michelle and Eakin, Hallie and Galafassi, Diego and Karpouzoglou, Timos and Marshall, Fiona and Moore, Michele Lee and Olsson, Per and {Siqueiros-Garc{\'i}a}, J. Mario and {van Zwanenberg}, Patrick and Vervoort, Joost M.}, - year = {2020}, - month = jan, - journal = {Sustainability Science}, - volume = {15}, - number = {1}, - pages = {161--178}, - publisher = {{Springer}}, - issn = {18624057}, - doi = {10.1007/s11625-019-00749-x}, - abstract = {Creating a just and sustainable planet will require not only small changes, but also systemic transformations in how humans relate to the planet and to each other, i.e., social\textendash ecological transformations. We suggest there is a need for collaborative environments where experimentation with new configurations of social\textendash ecological systems can occur, and we refer to these as transformative spaces. In this paper, we seek a better understanding of how to design and enable the creation of transformative spaces in a development context. We analyse nine case studies from a previous special issue on Designing Transformative Spaces that aimed to collect examples of cutting-edge action-oriented research on transformations from the Global South. The analysis showed five design phases as being essential: Problem Definition Phase; Operationalisation Phase; Tactical Phase; Outcome Phase; and Reflection Phase. From this synthesis, we distilled five key messages that should be considered when designing research, including: (a) there are ethical dilemmas associated with creating a transformative space in a system; (b) it is important to assess the readiness of the system for change before engaging in it; (c) there is a need to balance between `safe' and `safe-enough' spaces for transformation; (d) convening a transformative space requires an assemblage of diverse methodological frameworks and tools; and (e) transformative spaces can act as a starting point for institutionalising transformative change. Many researchers are now engaging in transdisciplinary transformations research, and are finding themselves at the knowledge\textendash action interface contributing to transformative space-making. We hope that by analysing experiences from across different geographies we can contribute towards better understanding of how to navigate the processes needed for the urgent global transformations that are being called for to create a more equitable and sustainable planet Earth.}, - keywords = {Co-production,Facilitation,Global South,Sustainability,Transdiciplinarity,Transformation} -} - -@article{Pereira2021, - title = {The {{New SWOT}} for a {{Sustainable World}}}, - author = {Pereira, Leandro and Pinto, Miguel and da Costa, Renato Lopes and Dias, {\'A}lvaro and Gon{\c c}alves, Rui}, - year = {2021}, - month = jan, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {7}, - number = {1}, - pages = {18}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2199-8531}, - doi = {10.3390/joitmc7010018}, - urldate = {2021-01-12}, - abstract = {In today's complex and changing business environment the concern with sustainability has gained more notoriety. However, companies still do not have a sustainable perspective, but a short-term one, where their values are constantly forgotten and this concept is no longer welcomed. This research demonstrates the need for companies to adapt and to start acting in this direction. Following a set of interviews conducted with professionals with management positions of high responsibility, findings reveal that although sustainability is on the management mind, strategies and tools need to be adapted to be at the core of the organization's strategic formulation. To support this process, a new SWOT analysis to fit a forward-looking sustainable world is proposed. Furthermore, due to the aggregative nature of the model, it represents an essential tool for an open innovation. ``SWOT i'' integrates the concern with sustainability as one of its pillars, placing the values and impacts that each decision can have at the center of the strategic formulation, allowing their performance to leverage.}, - keywords = {companies,performance,strategy,sustainability,swot i,tools,values}, - file = {/Users/fabio/Zotero/storage/3HUTNECM/full-text.pdf} -} - -@article{pereiraCouldElectricityDemand2020, - title = {Could Electricity Demand Contribute to Diversifying the Mix and Mitigating {{CO2}} Emissions? {{A}} Fresh Daily Analysis of the {{French}} Electricity System}, - shorttitle = {Could Electricity Demand Contribute to Diversifying the Mix and Mitigating {{CO2}} Emissions?}, - author = {Pereira, Diogo Santos and Marques, Ant{\'o}nio Cardoso}, - year = {2020}, - month = jul, - journal = {Energy Policy}, - volume = {142}, - pages = {111475}, - issn = {0301-4215}, - doi = {10.1016/j.enpol.2020.111475}, - urldate = {2022-09-20}, - abstract = {This paper introduces an innovative line of study to the current literature, by assessing the interactions, in France, between electricity sources, and periods with differing electricity consumption; namely morning off-peak, morning peak, middle off-peak, and night peak, using high-frequency data, specifically, daily data. This paper also analyses the impact of these interactions on both the diversification of the electricity mix, and on carbon dioxide emissions. Thus, this research could help identify the conditions needed, in both supply and demand, for a successful transition towards renewable energies. A Vector Autoregressive model has been employed to detect the presence of endogeneity, and to show the interactions between electricity supply and demand. Consumption in France has been problematic for the management of a portfolio containing rigid and intermittent base load sources. High peak consumption at night has increased the necessity to deploy a flexible electricity generating source, in other words, fossil fuels, and is one of the reasons for nuclear de-activation. In comparison, high morning peak consumption is rational and desirable. Indeed, morning peaks have been satisfied by a portfolio of renewable energies, decreasing the harmful impact of electricity on the environment, and keeping electricity costs low.}, - langid = {english}, - keywords = {Carbon dioxide emissions,Electricity mix diversification,Electricity supply and demand interactions,Energy transition,Nuclear phase-out}, - file = {/Users/fabio/Zotero/storage/PCKTQ7CW/Pereira_Marques_2020_Could electricity demand contribute to diversifying the mix and mitigating CO2.pdf;/Users/fabio/Zotero/storage/XXFUI84R/S0301421520302251.html} -} - -@article{pereiradasilvaIntegratingLifeCycle2021, - title = {Integrating Life Cycle Assessment in Early Process Development Stage: {{The}} Case of Extracting Starch from Mango Kernel}, - author = {{Pereira da Silva}, Anne Karolyne and Cardoso, Alexandre and {Ben{\'i}cio de S{\'a} Filho}, Ednaldo and {Monteiro Cordeiro de Azeredo}, Henriette and Freire, Fausto and Casimiro Filho, Francisco and {Brito de Figueir{\^e}do}, Maria Cl{\'e}a}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {321}, - pages = {128981}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128981}, - urldate = {2021-09-21} -} - -@article{Perez-Foguet2019, - title = {Continuing Professional Education in Engineering Faculties: {{Transversal}} Integration of Sustainable Human Development in Basic Engineering Sciences Courses}, - author = {{P{\'e}rez-Foguet}, Agust{\'i} and Lazzarini, Boris}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {218}, - pages = {772--781}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.054}, - file = {/Users/fabio/Zotero/storage/JBD3KZB9/Continuing professional education in engineering faculties- Transversal integration of sustainable human development in basic engineering sciences courses.pdf} -} - -@article{perez-perezSystemDynamicsModel2021, - title = {A System Dynamics Model: {{Transition}} to Sustainable Processes}, - author = {{P{\'e}rez-P{\'e}rez}, Juan Fernando and Parra, Juan Felipe and {Serrano-Garc{\'i}a}, Jakeline}, - year = {2021}, - month = may, - journal = {Technology in Society}, - volume = {65}, - pages = {101579}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2021.101579}, - urldate = {2021-04-29} -} - -@article{Perez-Soba2018, - title = {Maximising the Value of Research on Ecosystem Services: {{Knowledge}} Integration and Guidance Tools Mediating the Science, Policy and Practice Interfaces}, - author = {{P{\'e}rez-Soba}, Marta and Verweij, Peter and Saarikoski, Heli and Harrison, Paula A. and Barton, David N. and Furman, Eeva}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {599--607}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.11.012}, - abstract = {Progress towards sustainable development ultimately depends on policy makers' and practitioners' capacities to protect Natural Capital (NC) stocks so that they are not exploited beyond Earth's capability to renew them. This involves a sound understanding of the benefits and values derived by society from NC and ecosystem services (ES). Scientific evidence to support this understanding is growing rapidly, but access to the data, methods, tools and expertise that underpins this evidence base is fragmented, particularly at the science \textendash{} policy \textendash{} practice interfaces. Two large EU research projects have therefore developed a joint knowledge platform \textendash{} called Oppla \textendash{} aimed at providing access to a wide range of resources on NC and ES. This new approach in the EU Research Area aims not only at integrating knowledge into one single platform, but also at making this knowledge operational amongst communities of science, policy and practice. Furthermore, it fosters the more efficient use of research funds by providing an open and freely available platform in which existing and new NC and ES projects can integrate their outcomes. This paper focuses on the knowledge integration and some guidance tools within Oppla to help users to find research outcomes.}, - keywords = {Assessment tools and methods,Case study finder,Ecosystem services,Knowledge transfer,Web-platform}, - file = {/Users/fabio/Zotero/storage/8BYPT5TU/Maximising-the-value-of-research-on-ecosystem-services--Knowled_2018_Ecosyst.pdf} -} - -@inproceedings{Perez2013, - title = {Ranking {{Model For 3D Printers}}}, - booktitle = {International {{Solid Freeform Fabrication Symposium An Additive Manufacturing Conference}}}, - author = {Perez, Mireya A and Ramos, Jorge and Espalin, David and Hossain, Mohammad S and Wicker, Ryan B}, - year = {2013}, - pages = {1048--1065}, - address = {{Austin, Texas, USA}}, - abstract = {The capabilities of desktop additive manufacturing (AM) machines were evaluated based on the ability to produce a standard component. This work also developed a model/method for evaluating and ranking AM technologies based on select criteria that can facilitate purchasing decisions. A standard part was adapted and printed on each machine, and evaluated in various ways to provide machine-specific input data for the model. The research highlights the differences between AM units and suggests a method by which to evaluate the differences. With the rapid proliferation of desktop additive manufacturing units, a quantitative ranking system was developed to rate these units so that the consumer, for example, can use this model to assist with decision making during purchase. Although the focus of the work was on desktop systems, the approach can be applied across other AM technologies.}, - file = {/Users/fabio/Zotero/storage/65YABYKQ/m-api-26aae648-8b9f-f2af-6d1c-f307521465df.pdf} -} - -@article{Perez2018, - title = {Surface Quality Enhancement of Fused Deposition Modeling ({{FDM}}) Printed Samples Based on the Selection of Critical Printing Parameters}, - author = {P{\'e}rez, Mercedes and {Medina-S{\'a}nchez}, Gustavo and {Garc{\'i}a-Collado}, Alberto and Gupta, Munish and Carou, Diego}, - year = {2018}, - month = aug, - journal = {Materials}, - volume = {11}, - number = {8}, - pages = {1382}, - publisher = {{MDPI AG}}, - issn = {19961944}, - doi = {10.3390/ma11081382}, - urldate = {2021-01-15}, - abstract = {The present paper shows an experimental study on additive manufacturing for obtaining samples of polylactic acid (PLA). The process used for manufacturing these samples was fused deposition modeling (FDM). Little attention to the surface quality obtained in additive manufacturing processes has been paid by the research community. So, this paper aims at filling this gap. The goal of the study is the recognition of critical factors in FDM processes for reducing surface roughness. Two different types of experiments were carried out to analyze five printing parameters. The results were analyzed by means of Analysis of Variance, graphical methods, and non-parametric tests using Spearman's {$\rho$} and Kendall's {$\tau$} correlation coefficients. The results showed how layer height and wall thickness are the most important factors for controlling surface roughness, while printing path, printing speed, and temperature showed no clear influence on surface roughness.}, - keywords = {3D printing,Additive manufacturing,ANOVA,Correlation coefficients,Fused deposition modeling,Non-parametric tests,Surface roughness}, - file = {/Users/fabio/Zotero/storage/33GDAJHU/full-text.pdf} -} - -@article{Perez2020, - title = {Current Advances in Additive Manufacturing}, - author = {P{\'e}rez, Mercedes and Carou, Diego and Rubio, Eva Mar{\'i}a and Teti, Roberto}, - year = {2020}, - month = jan, - journal = {Procedia CIRP}, - volume = {88}, - pages = {439--444}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2020.05.076}, - urldate = {2020-11-16}, - abstract = {Additive manufacturing is a topic of high growth in recent years in both academic and industrial terms. Based on important advantages such as the possibility to manufacture complex geometries, the technology is being continuously developed and improved. So, additive manufacturing is rapidly overcoming some of its initial limitations and, thus, increasing its applications in a wide range of industrial sectors. In addition, additive manufacturing is of public interest due to the opportunities and applications that it offers, or it may provide. The article presents the basics of the technology, highlighting its main advantages and limitations. Moreover, it aims to collect the latest trends (e.g., 4D printing, bioprinting, hybrid processes and micromanufacturing), applications and developments that this technology currently has.}, - keywords = {Additive manufacturing,Industry,Innovation,Novel applications,R\&D,Technology development}, - file = {/Users/fabio/Zotero/storage/5A9ICDP3/full-text.pdf} -} - -@article{perfect-mremaOstromCommonsCritical2022, - title = {Ostrom and the Commons: {{Critical}} Appreciation and Interrogation in the Context of Forest Management in {{Tanzania}}}, - author = {{Perfect-Mrema}, Joseph}, - year = {2022}, - month = jan, - journal = {Environmental Science \& Policy}, - volume = {127}, - pages = {77--86}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.10.011}, - urldate = {2021-11-07} -} - -@article{Peronard2019, - title = {Broadening the Understanding of the Role of Consumer Services in the Circular Economy: {{Toward}} a Conceptualization of Value Creation Processes}, - author = {Peronard, Jean-Paul and Ballantyne, Anne Gammelgaard}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118010}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118010} -} - -@article{Perrenot2012, - title = {The Virtual Reality Simulator {{dV-Trainer}}\textregistered{} Is a Valid Assessment Tool for Robotic Surgical Skills}, - author = {Perrenot, Cyril and Perez, Manuela and Tran, Nguyen and Jehl, Jean-Philippe and Felblinger, Jacques and Bresler, Laurent and Hubert, Jacques}, - year = {2012}, - journal = {Surgical Endoscopy}, - volume = {26}, - number = {9}, - pages = {2587--2593}, - issn = {0930-2794}, - doi = {10.1007/s00464-012-2237-0}, - abstract = {BACKGROUND Exponential development of minimally invasive techniques, such as robotic-assisted devices, raises the question of how to assess robotic surgery skills. Early development of virtual simulators has provided efficient tools for laparoscopic skills certification based on objective scoring, high availability, and lower cost. However, similar evaluation is lacking for robotic training. The purpose of this study was to assess several criteria, such as reliability, face, content, construct, and concurrent validity of a new virtual robotic surgery simulator. METHODS This prospective study was conducted from December 2009 to April 2010 using three simulators dV-Trainers(\textregistered ) (MIMIC Technologies(\textregistered )) and one Da Vinci S(\textregistered ) (Intuitive Surgical(\textregistered )). Seventy-five subjects, divided into five groups according to their initial surgical training, were evaluated based on five representative exercises of robotic specific skills: 3D perception, clutching, visual force feedback, EndoWrist(\textregistered ) manipulation, and camera control. Analysis was extracted from (1) questionnaires (realism and interest), (2) automatically generated data from simulators, and (3) subjective scoring by two experts of depersonalized videos of similar exercises with robot. RESULTS Face and content validity were generally considered high (77 \%). Five levels of ability were clearly identified by the simulator (ANOVA; p = 0.0024). There was a strong correlation between automatic data from dV-Trainer and subjective evaluation with robot (r = 0.822). Reliability of scoring was high (r = 0.851). The most relevant criteria were time and economy of motion. The most relevant exercises were Pick and Place and Ring and Rail. CONCLUSIONS The dV-Trainer(\textregistered ) simulator proves to be a valid tool to assess basic skills of robotic surgery.}, - isbn = {1432-2218 (Electronic)\textbackslash r0930-2794 (Linking)}, - pmid = {22476836}, - file = {/Users/fabio/Zotero/storage/ICAV8R6J/The virtual reality simulator dV-Trainer is a valid assessment tool for robotic surgical skills.pdf} -} - -@article{Perrin2016, - title = {Influence of Impurities on the Performances of {{HIPS}} Recycled from {{Waste Electric}} and {{Electronic Equipment}} ({{WEEE}})}, - author = {Perrin, Didier and Mantaux, Olivier and Ienny, Patrick and L{\'e}ger, Romain and Dumon, Michel and {Lopez-Cuesta}, Jos{\'e} Marie}, - year = {2016}, - journal = {Waste Management}, - volume = {56}, - pages = {438--445}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2016.07.014}, - abstract = {In order to produce a high quality recycled material from real deposits of electric and electronic equipment, the rate of impurities in different blended grades of reclaimed materials has to be reduced. Setting up industrial recycling procedures requires to deal with the main types of polymers presents in WEEE (Waste Electric and Electronic Equipment), particularly High Impact Polystyrene (HIPS) as well as other styrenic polymers such as Acrylonitrile-Butadiene-Styrene (ABS), Polystyrene (PS) but also polyolefin which are present into WEEE deposit as Polypropylene (PP). The production of a substantial quantity of recycled materials implies to improve and master the compatibility of different HIPS grades. The influence of polymeric impurities has to be studied since automatic sorting techniques are not able to remove completely these fractions. Investigation of the influence of minor ABS, PS and PP polymer fractions as impurities has been done on microstructure and mechanical properties of HIPS using environmental scanning electron microscopy (ESEM) in order to determine the maximum tolerated rate for each of them into HIPS after sorting and recycling operations.}, - keywords = {Compatibility,HIPS,Impurities,Recycling,Waste}, - file = {/Users/fabio/Zotero/storage/HJ8ESEZM/Influence of impurities on the performances of HIPS recycled from Waste Electric and Electronic Equipment (WEEE).pdf} -} - -@article{Perry2019, - title = {Pin {{Fin Array Heat Sinks}} by {{Cold Spray Additive Manufacturing}}: {{Economics}} of {{Powder Recycling}}}, - author = {Perry, J. and Richer, P. and Jodoin, B. and Matte, E.}, - year = {2019}, - month = jan, - journal = {Journal of Thermal Spray Technology}, - volume = {28}, - number = {1-2}, - pages = {144--160}, - issn = {1059-9630}, - doi = {10.1007/s11666-018-0758-3} -} - -@article{persoonScienceBaseRenewables2020, - title = {The Science Base of Renewables}, - author = {Persoon, P.G.J. and Bekkers, R.N.A. and Alkemade, F.}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120121}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120121}, - urldate = {2020-07-14}, - abstract = {Initiatives to foster the development of Renewable Energy Technologies (RETs) can benefit from a deep understanding of the science base that underlies such technologies, and especially how that science base differs from that of Fossil Fuel based Energy Technologies (FFETs). This paper investigates both science bases using citations in patents to scientific journals. We find that RETs generally have a more substantial science base and draw on a more diverse set of scientific disciplines. On average, the science on which RETs build is more recent, less applied and is published in journals with a higher WOS Journal Impact Factor. However, for different RETs (e.g., photovoltaics, wind turbines and non-fossil fuels), we observe much more variation across these dimensions than for different FFETs (e.g., combustion and gas turbines). Furthermore, the broad spectrum of sciences on which RETs build largely includes the smaller spectrum on which FFETs build. Based on these findings, we offer several policy recommendations to better stimulate the development of RETs.}, - keywords = {Non-patent literature,Patents,Renewables,Science base}, - file = {/Users/fabio/Zotero/storage/7H5DR86E/full-text.pdf} -} - -@article{Perugini2005, - title = {A Life Cycle Assessment of Mechanical and Feedstock Recycling Options for Management of Plastic Packaging Wastes}, - author = {Perugini, Floriana and Mastellone, Maria Laura and Arena, Umberto}, - year = {2005}, - month = jul, - journal = {Environmental Progress}, - volume = {24}, - number = {2}, - pages = {137--154}, - issn = {0278-4491}, - doi = {10.1002/ep.10078}, - urldate = {2014-06-25}, - keywords = {2005 american institute of,chemical engineers,feedstock recycling,life cycle assessment,mechanical recycling,over the years,plas-,plastic waste,plastics have undergone a,spectac-,tic recycling}, - file = {/Users/fabio/Zotero/storage/VMTTWQQW/A life cycle assessment of mechanical and feedstock recycling options for management of plastic packaging wastes.pdf} -} - -@article{peruginiEmergingReportingVerification2021, - title = {Emerging Reporting and Verification Needs under the {{Paris Agreement}}: {{How}} Can the Research Community Effectively Contribute?}, - author = {Perugini, Lucia and Pellis, Guido and Grassi, Giacomo and Ciais, Philippe and Dolman, Han and House, Joanna I. and Peters, Glen P. and Smith, Pete and G{\"u}nther, Dirk and Peylin, Philippe}, - year = {2021}, - month = aug, - journal = {Environmental Science \& Policy}, - volume = {122}, - pages = {116--126}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.04.012}, - urldate = {2021-05-10}, - file = {/Users/fabio/Zotero/storage/2Z3LSLZK/full-text.pdf} -} - -@article{Peschl2014, - title = {Designing and {{Enabling Spaces}} for Collaborative Knowledge Creation and Innovation: {{From}} Managing to Enabling Innovation as Socio-Epistemological Technology}, - author = {Peschl, Markus F. and Fundneider, Thomas}, - year = {2014}, - journal = {Computers in Human Behavior}, - volume = {37}, - pages = {346--359}, - publisher = {{Elsevier Ltd}}, - issn = {07475632}, - doi = {10.1016/j.chb.2012.05.027}, - abstract = {This paper is about designing spaces enabling processes of collaborative knowledge creation and innovation. It is a theoretical paper on the role of artifacts as enablers for creating new knowledge. We refer to these artifacts as Enabling Spaces comprising an architectural, technological (ICT), social, cognitive, organizational, cultural, as well as emotional dimension. The claim of this paper is that innovation is a highly challenging social and epistemological process which needs supporting (infra-)structures facilitating and enabling these processes. These processes have to take into account on various levels and domains in an integrated and interdisciplinary manner. It will be shown that innovation can no longer be understood as a mechanistic knowledge creation process. The concept of enabling will be developed as an alternative approach to innovation and will be applied as a design principle for Enabling Spaces. We will discuss the role of ICT in such an alternative approach to innovation. Finally, we will derive design principles for such highly interdisciplinary Enabling Spaces from these considerations.}, - isbn = {9780956533302}, - keywords = {Enabling Space,Innovation,Participatory design} -} - -@article{Petersen2017, - title = {Impact of {{DIY Home Manufacturing}} with {{3D Printing}} on the {{Toy}} and {{Game Market}}}, - author = {Petersen, Emily and Kidd, Romain and Pearce, Joshua}, - year = {2017}, - journal = {Technologies}, - volume = {5}, - number = {3}, - pages = {45}, - issn = {2227-7080}, - doi = {10.3390/technologies5030045}, - abstract = {The 2020 toy and game market is projected to be US\$135 billion. To determine if 3D printing could affect these markets if consumers offset purchases by 3D printing free designs, this study investigates the 100 most popular downloaded designs at MyMiniFactory in a month. Savings are quantified for using a Lulzbot Mini 3D printer and three filament types: commercial filament, pellet-extruded filament, and post-consumer waste converted to filament with a recyclebot. Case studies probed the quality of: (1) six common complex toys; (2) Lego blocks; and (3) the customizability of open source board games. All filaments analyzed saved the user over 75\% of the cost of commercially available true alternative toys and over 90\% for recyclebot filament. Overall, these results indicate a single 3D printing repository among dozens is saving consumers well over \$60 million/year in offset purchases. The most common savings fell by 40\%\textendash 90\% in total savings, which came with the ability to make novel toys and games. The results of this study show consumers can generate higher value items for less money using the open source distributed manufacturing paradigm. It appears clear that consumer do-it-yourself (DIY) manufacturing is set to have a significant impact on the toy and game markets in the future.}, - isbn = {1906487146}, - keywords = {3d printing,3D printing,additive manufacturing,consumer,economics,open-source,toy industry}, - file = {/Users/fabio/Zotero/storage/KKWVEQIS/impact of diy home manufacturing with 3d printing on the toy and game market.pdf} -} - -@article{Petersen2017a, - title = {Emergence of {{Home Manufacturing}} in the {{Developed World}}: {{Return}} on {{Investment}} for {{Open-Source}} 3-{{D Printers}}}, - author = {Petersen, Emily and Pearce, Joshua}, - year = {2017}, - month = feb, - journal = {Technologies}, - volume = {5}, - number = {1}, - pages = {7}, - issn = {2227-7080}, - doi = {10.3390/technologies5010007}, - abstract = {Through reduced 3-D printer cost, increased usability, and greater material selection, additive manufacturing has transitioned from business manufacturing to the average prosumer. This study serves as a representative model for the potential future of 3-D printing in the average American household by employing a printer operator who was relatively unfamiliar with 3-D printing and the 3-D design files of common items normally purchased by the average consumer. Twenty-six items were printed in thermoplastic and a cost analysis was performed through comparison to comparable, commercially available products at a low and high price range. When compared to the low-cost items, investment in a 3-D printer represented a return of investment of over 100\% in five years. The simple payback time for the high-cost comparison was less than 6 months, and produced a 986\% return. Thus, fully-assembled commercial open source 3-D printers can be highly profitable investments for American consumers. Finally, as a preliminary gauge of the effect that widespread prosumer use of 3-D printing might have on the economy, savings were calculated based on the items' download rates from open repositories. Results indicate that printing these selected items have already saved prosumers over \$4 million by substituting for purchases.}, - isbn = {1906487146}, - keywords = {3-d printing,additive manufacturing,consumer,distributed manufacturing,economics}, - file = {/Users/fabio/Zotero/storage/GYN2XPR4/Emergence of Home Manufacturing in the Developed World Return on Investment for Open-Source 3-D Printers.pdf} -} - -@article{Petersen2021, - title = {Universities as Change Agents in Resource-Poor Local Settings: {{An}} Empirically Grounded Typology of Engagement Models}, - author = {Petersen, Il-haam and Kruss, Glenda}, - year = {2021}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {167}, - pages = {120693}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120693}, - urldate = {2021-03-08}, - file = {/Users/fabio/Zotero/storage/PNNH5RE8/full-text.pdf} -} - -@article{petersmannProcessinducedMorphologicalFeatures2020, - title = {Process-Induced Morphological Features in Material Extrusion-Based Additive Manufacturing of Polypropylene}, - author = {Petersmann, Sandra and {Spoerk-Erdely}, Petra and Feuchter, Michael and Wieme, Tom and Arbeiter, Florian and Spoerk, Martin}, - year = {2020}, - month = oct, - journal = {Additive Manufacturing}, - volume = {35}, - pages = {101384}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101384}, - urldate = {2020-07-14}, - abstract = {Fused filament fabrication is a material extrusion-based additive manufacturing technique that has been strongly growing in popularity, for it is accessible, versatile, and affordable. The 3D-printing of semi-crystalline polymers still faces major challenges, though. Apart from common issues such as shrinkage and warpage phenomena, a variety of process-related morphological and crystallographic changes can occur. Since these changes strongly influence the resulting material properties, it is crucial to understand the complex relationships between the material, its processing and final properties on a fundamental level. In this context, the present work examines the impact of different nozzle temperatures and printing speeds on 3D-printed polypropylene (PP) samples. One extreme parameter set (high nozzle temperature, low printing speed) reveals a homogeneous morphology, weak flow-induced orientations, isotropic thermal conductivities and a strong inter-layer diffusion. In contrast, the other extreme parameter set (low nozzle temperature, high printing speed) forms an inhomogeneous morphology with a complex growth of shish-kebab structures, a pronounced weld line morphology and a highly anisotropic behaviour. By in-depth analyses of four parameter sets, this paper offers novel insights into the complex formation of crystalline structures in 3D-printed semi-crystalline polymers and suggests how to purposefully design the property portfolio of these materials.}, - keywords = {Crystallography,Fused filament fabrication,Mechanical property,Morphology,Polypropylene} -} - -@article{Peterson2019, - title = {Review of Acrylonitrile Butadiene Styrene in Fused Filament Fabrication: {{A}} Plastics Engineering-Focused Perspective}, - author = {Peterson, Amy M.}, - year = {2019}, - month = may, - journal = {Additive Manufacturing}, - volume = {27}, - pages = {363--371}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.03.030}, - file = {/Users/fabio/Zotero/storage/6BCFAMKU/Review of acrylonitrile butadiene styrene in fused filament fabrication- A plastics engineering-focused perspective.pdf} -} - -@article{Petit-Boix2018, - title = {Circular Economy in Cities: {{Reviewing}} How Environmental Research Aligns with Local Practices}, - author = {{Petit-Boix}, Anna and Leipold, Sina}, - year = {2018}, - journal = {Journal of Cleaner Production}, - volume = {195}, - pages = {1270--1281}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.05.281}, - abstract = {Circular economy (CE) is gaining popularity at different levels with the promise of creating more sustainable processes. In this context, cities are implementing a number of initiatives that aim to turn them into sustainable circular systems. Whether these initiatives achieve their sustainability goals, however, is largely unknown. Nevertheless, as the application of CE strategies is actively encouraged by many policies across the globe, there is a need to quantify the environmental impacts and to identify the strategies that support urban sustainability. This paper analyses the extent to which research focuses on quantifying the environmental balance of CE initiatives promoted at the municipal level. To this end, the analysis scanned CE initiatives reported in cities around the globe and classified them into urban targets and CE strategies. In parallel, the paper conducted a review of the literature that uses industrial ecology tools to account for the environmental impacts of CE strategies. Results show a diverse geographical representation, as reported cities concentrated in Europe, whereas for environmental research, the main results came from China. In general, cities encourage strategies relating to urban infrastructure (47\%), with and additional focus on social consumption aspects, such as repair and reuse actions. In comparison, research mainly addressed industrial and business practices (58\%), but the approach to infrastructure was similar to that of cities, both with a special interest in waste management. Research has yet to assess social consumption and urban planning strategies, the latter essential for defining the impacts of other urban elements. Hence, there is a need to define the environmental impacts of the strategies that cities select in their quest for circularity. Research and practice can also benefit from working collaboratively so as to prioritize the CE strategies that best fit into the features of each urban area.}, - keywords = {Circular economy,Industrial ecology,Sustainability,Urban}, - file = {/Users/fabio/Zotero/storage/42JMPKNJ/Circular economy in cities- Reviewing how environmental research aligns with local practices.pdf} -} - -@article{petit-boixTransdisciplinaryResourceMonitoring2022, - title = {Transdisciplinary Resource Monitoring Is Essential to Prioritize Circular Economy Strategies in Cities}, - author = {{Petit-Boix}, Anna and Apul, Defne and Wiedmann, Thomas and Leipold, Sina}, - year = {2022}, - month = feb, - journal = {Environmental Research Letters}, - volume = {17}, - doi = {10.1088/1748-9326/ac44c6}, - abstract = {Seeking to meet sustainability targets, cities are promoting a number of circular economy initiatives. Whether or not these actions help cities to approach sustainable resource management is often unclear. To identify, prioritize and monitor resource-efficient strategies, cities can look for targets and indicators among the Sustainable Development Goals (SDGs). While the SDGs provide useful goals, they lack applicable and accurate indicators for cities. To address this shortcoming, we link the SDGs to the urban circular economy by looking at the urban metabolism and identify monitoring needs and gaps. Although consumption-based footprint indicators are the most suitable approach, these are barely covered in the SDGs. We propose a framework facilitating transdisciplinary projects and experimentation to assess resource footprints and prioritize circular strategies in cities. Our discussion will guide practitioners and academics towards a sustainable circular transformation in cities.}, - file = {/Users/fabio/Zotero/storage/8Q53RDUE/Petit-Boix et al_2022_Transdisciplinary resource monitoring is essential to prioritize circular.pdf} -} - -@article{Petrick2013, - title = {{{3D Printing Disrupts Manufacturing}}: {{How Economies}} of {{One Create New Rules}} of {{Competition}}}, - author = {Petrick, Irene J. and Simpson, Timothy W.}, - year = {2013}, - month = nov, - journal = {Research-Technology Management}, - volume = {56}, - number = {6}, - pages = {12--16}, - issn = {0895-6308}, - doi = {10.5437/08956308X5606193}, - abstract = {Authors: Irene, J Petrick = Penn State University professor and managing director of the TrendScape Innovation Group, internationally recognised expert in strategic road mapping, author/co-author of over 135publications Timothy W Simpson = Professor of mechanical and industrial engineering at Penn State University, authored more than 250 technical publications}, - isbn = {0895-6308}, - pmid = {1450549921}, - keywords = {3D printing,digiproneurship,manufacturing,New Business Development,Product Development Process,Supply chain}, - file = {/Users/fabio/Zotero/storage/KG7LTXAK/3D Printing Disrupts Manufacturing How Economies of One Create New Rules of Competition.pdf} -} - -@article{Petrovic2011, - title = {Additive Layered Manufacturing: Sectors of Industrial Application Shown through Case Studies}, - author = {Petrovic, Vojislav and Vicente Haro Gonzalez, Juan and Jord{\'a} Ferrando, Olga and Delgado Gordillo, Javier and Ram{\'o}n Blasco Puchades, Jose and Portol{\'e}s Gri{\~n}an, Luis}, - year = {2011}, - month = feb, - journal = {International Journal of Production Research}, - volume = {49}, - number = {4}, - pages = {1061--1079}, - issn = {0020-7543}, - doi = {10.1080/00207540903479786}, - urldate = {2014-01-27}, - abstract = {In modern industry, mass production has migrated to third world countries. To be competitive, European companies are forced to rapidly switch towards manufacturing of short series of customised products with added value. In European industry, a great effort has been made in order to customise products and give them an added value by developing new fabrication technologies. Additive layered manufacturing (ALM), also known as rapid manufacturing (RM), is a powerful tool that offers the necessary competitiveness to European companies. ALM comprises the use of layer-by-layer manufacturing in order to build a part by addition of material. Fabrication is performed directly from the 3D CAD model, which is sliced into layers that are printed one upon the other. Also known as free form fabrication, additive fabrication `unlocks' design potential since part design obeys functionality, pushing the limits of manufacturability. In this paper, the authors review ALM technologies and the state-of-the-art of ALM applications in tooling, biomedicine and lightweight structures for the automotive and aerospace sectors. The authors present their experience in industrial application of additive fabrication through various industrial technology transfer projects made to transfer ALM technology to SMEs. Various case studies are presented and the achieved benefits of ALM are shown.}, - isbn = {00207543}, - file = {/Users/fabio/Zotero/storage/2TAZSZ5R/Additive layered manufacturing sectors of industrial application shown through case studies.pdf;/Users/fabio/Zotero/storage/KXTIXZ4G/Additive layered manufacturing sectors of industrial application shown through case studies(2).pdf} -} - -@article{Petrucci2006, - title = {Low-{{Cost Processing}} of {{Plastic Waste Composites}}}, - author = {Petrucci, L. J. T. and Monteiro, S. N. and Rodriguez, R. J. S. and D'Almeida, J. R. M.}, - year = {2006}, - month = jun, - journal = {Polymer-Plastics Technology and Engineering}, - volume = {45}, - number = {7}, - pages = {865--869}, - issn = {0360-2559}, - doi = {10.1080/03602550600611735} -} - -@article{Petruzzi2018, - title = {Hospital of {{Objects}}. {{Recycling}} Plastic from the Small Electronic Devices to Redesign Old Objects by the 3d Printers}, - author = {Petruzzi, Chiara and Lucchio, Loredana Di and MARIA Cafiero, Lorenzo and Tuffi, Riccardo and Ubertini, Alessio and Caretto, Flavio}, - year = {2017}, - month = jul, - journal = {The Design Journal}, - volume = {20}, - number = {sup1}, - pages = {S2716-S2723}, - publisher = {{Routledge}}, - issn = {1460-6925}, - doi = {10.1080/14606925.2017.1352783}, - abstract = {ISSN: 1460-6925 (Print) 1756-3062 (Online) Journal homepage: http://www.tandfonline.com/loi/rfdj20 Abstract: "Hospital of Objects" is a service that provides for the recovery of forgotten, obsolete and accidentally broken objects, it fall within typical chain of personal manufacturing. Through the design input of the designer / maker, the obsolete object reacquires an aesthetic and functional dignity, according to the contemporary hybrid design and hacking design logic. The aim is to give new life to small everyday objects , recomposing, aggregating or replacing some parts with new parts 3d printed, using filament obtained from the recycling plastic of WEEE waste. The service through the exchange of expertise (including Laboratory for the recycling of WEEE and Rapid Manufacturing Laboratory), cooperation (between user and designer / maker), attention to environmental impact, leading to the creation of a particular product: hybrid of languages and technologies, that allows experiments in the field of recycling, technology and creativity, exploiting the 3D Printing aimed at small-scale production or unique pieces.}, - keywords = {3D printing,Plastics,Recovery,Recycle,WEEE}, - file = {/Users/fabio/Zotero/storage/345BB3UI/Hospital of Objects Recycling plastic from the small electronic devices to redesign old objects by the 3d printers.pdf} -} - -@article{Petsiuk2020, - title = {Open {{Source}} 3-{{D Filament Diameter Sensor}} for {{Recycling}}, {{Winding}} and {{Additive Manufacturing Machines}}}, - author = {Petsiuk, Aliaksei L. and Pearce, Joshua M.}, - year = {2020}, - month = nov, - eprint = {2012.00191}, - urldate = {2020-12-07}, - abstract = {To overcome the challenge of upcycling plastic waste into 3-D printing filament in the distributed recycling and additive manufacturing systems, this study designs, builds, tests and validates an open source 3-D filament diameter sensor for recycling and winding machines. The modular system for multi-axis optical control of the diameter of the recycled 3-D-printer filament makes it possible to analyze the surface structure of the processed filament, save the history of measurements along the entire length of the spool, as well as mark defective areas. The sensor is developed as an independent module and integrated into a recyclebot. The diameter sensor was tested on different kinds of polymers (ABS, PLA) different sources of plastic (recycled 3-D prints and virgin plastic waste) and different colors including clear plastic. The results of the diameter measurements using the camera were compared with the manual measurements, and the measurements obtained with a one-dimensional digital light caliper. The results found that the developed open source filament sensing method allows users to obtain significantly more information in comparison with basic one-dimensional light sensors and using the received data not only for more accurate diameter measurements, but also for a detailed analysis of the recycled filament surface. The developed method ensures greater availability of plastics recycling technologies for the manufacturing community and stimulates the growth of composite materials creation. The presented system can greatly enhance the user possibilities and serve as a starting point for a complete recycling control system that will regulate motor parameters to achieve the desired filament diameter with acceptable deviations and even control the extrusion rate on a printer to recover from filament irregularities.}, - archiveprefix = {arxiv}, - keywords = {additive manufacturing,computer vision,extrusion,quality assurance,recycling,waste plastic}, - file = {/Users/fabio/Zotero/storage/FJCHRHZS/full-text.pdf} -} - -@article{Petsiuk2020a, - title = {Open Source Computer Vision-Based Layer-Wise {{3D}} Printing Analysis}, - author = {Petsiuk, Aliaksei L. and Pearce, Joshua M.}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101473}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101473} -} - -@article{petsiukWastePlasticDirect2022, - title = {Waste {{Plastic Direct Extrusion Hangprinter}}}, - author = {Petsiuk, Aliaksei and Lavu, Bharath and Dick, Rachel and Pearce, Joshua M.}, - year = {2022}, - month = sep, - journal = {Inventions}, - volume = {7}, - number = {3}, - pages = {70}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2411-5134}, - doi = {10.3390/inventions7030070}, - urldate = {2022-10-05}, - abstract = {As the additive manufacturing industry grows, it is compounding the global plastic waste problem. Distributed recycling and additive manufacturing (DRAM) offers an economic solution to this challenge, but it has been relegated to either small-volume 3D printers (limiting waste recycling throughput) or expensive industrial machines (limiting accessibility and lateral scaling). To overcome these challenges, this paper provides proof-of-concept for a novel, open-source hybrid 3D printer that combines a low-cost hanging printer design with a compression-screw-based end-effector that allows for the direct extrusion of recycled plastic waste in large expandable printing volumes. Mechanical testing of the resultant prints from 100\% waste plastic, however, showed that combining the challenges of non-uniform feedstocks and a heavy printhead for a hangprinter reduced the strength of the parts compared to fused filament fabrication. The preliminary results are technologically promising, however, and provide opportunities to improve on the open-source design to help process the volumes of waste plastic needed for DRAM to address the negative environmental impacts of global plastic use.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {3D printing,additive manufacturing,BAAM,big area additive manufacturing,hanging printer,hangprinter,plastic waste,recycling,sustainable manufacturing,wire robot}, - file = {/Users/fabio/Zotero/storage/IKE7DM4Z/Petsiuk et al_2022_Waste Plastic Direct Extrusion Hangprinter.pdf;/Users/fabio/Zotero/storage/8WVU2H3X/70.html} -} - -@article{peukertCollaborativeDesignPrototyping2021, - title = {Collaborative {{Design Prototyping}} in {{Transdisciplinary Research}}: {{An Approach}} to {{Heterogeneity}} and {{Unknowns}}}, - author = {Peukert, Daniela and Vilsmaier, Ulli}, - year = {2021}, - month = jul, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2021.102808}, - urldate = {2021-07-20} -} - -@article{peuraGarbageProductService2022, - title = {From Garbage to Product and Service Systems: {{A}} Longitudinal {{Finnish}} Case Study of Waste Management Evolution}, - author = {Peura, Pekka and Voutilainen, Olli and Kantola, Jussi}, - year = {2022}, - month = mar, - journal = {Waste Management}, - volume = {140}, - pages = {143--153}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.01.025}, - urldate = {2022-01-25} -} - -@article{Phaal2004, - title = {Technology Roadmapping - {{A}} Planning Framework for Evolution and Revolution}, - author = {Phaal, Robert}, - year = {2004}, - journal = {Technological Forecasting and Social Change}, - volume = {71}, - number = {1-2}, - pages = {5--26}, - issn = {00401625}, - doi = {10.1016/S0040-1625(03)00072-6}, - urldate = {2020-12-30}, - abstract = {Technology roadmapping is a flexible technique that is widely used within industry to support strategic and long-range planning. The approach provides a structured (and often graphical) means for exploring and communicating the relationships between evolving and developing markets, products and technologies over time. It is proposed that the roadmapping technique can help companies survive in turbulent environments by providing a focus for scanning the environment and a means of tracking the performance of individual, including potentially disruptive, technologies. Technology roadmaps are deceptively simple in terms of format, but their development poses significant challenges. In particular the scope is generally broad, covering a number of complex conceptual and human interactions. This paper provides an overview of the origins of technology roadmapping, by means of a brief review of the technology and knowledge management foundations of the technique in the context of the fields of technology strategy and technology transitions. The rapidly increasing literature on roadmapping itself is presented in terms of a taxonomy for classifying roadmaps, in terms of both organizational purpose and graphical format. This illustrates the flexibility of the approach but highlights a key gap-a robust process for technology roadmapping. A fast-start method for technology roadmapping developed by the authors is introduced and described. Developed in collaboration with industry, this method provides a means for improved understanding of the architecture of roadmaps and for rapidly initiating roadmapping in a variety of organizational contexts. This paper considers the use of the roadmaps from two main perspectives. The first is a company perspective: roadmaps that allow technology developments to be integrated with business planning, and the impact of new technologies and market developments to be assessed. The second perspective is multiorganizational: roadmaps that seek to capture the environmental landscape, threats and opportunities for a particular group of stakeholders in a technology or application area. Two short illustrative cases show the fast-start method in use in the context of disruptive technological trends from these two perspectives. \textcopyright{} 2003 Elsevier Inc. All rights reserved.}, - keywords = {Evolution,Revolution,Technology roadmapping}, - file = {/Users/fabio/Zotero/storage/TI3KFQSH/full-text.pdf} -} - -@article{Phaal2011, - title = {A Framework for Mapping Industrial Emergence}, - author = {Phaal, R. and O'Sullivan, E. and Routley, M. and Ford, S. and Probert, D.}, - year = {2011}, - journal = {Technological Forecasting and Social Change}, - volume = {78}, - number = {2}, - pages = {217--230}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2010.06.018}, - abstract = {The industrial landscape is becoming increasingly complex and dynamic, with innovative technologies stimulating the emergence of new applications, business models and industries. This paper presents a framework for mapping science and technology-based industrial emergence, in order to better understand the nature and characteristics of such phenomena, as a basis for improved strategy development. A full lifecycle perspective is included, emphasizing early stage phases associated with scientific and technological developments, together with key transitions between phases related to the conversion of scientific knowledge to technological capability, application, industrial activity and economic value. Roadmapping concepts are used to map industrial emergence phenomena from various perspectives that cover value creation and capture activities together with demand and supply-side factors. The framework has been tested by developing more than 25 diverse 'emergence maps' of historical industrial evolution, building confidence that the framework might be applicable to current and future emergence. Common characteristics of industrial emergence have been identified, including key events and milestones, focusing on a chain of demonstrators that delineate the various phases and transitions. \textcopyright{} 2010 Elsevier Inc.}, - keywords = {Industrial dynamics,Roadmapping}, - file = {/Users/fabio/Zotero/storage/5UH4FAMQ/A framework for mapping industrial emergence.pdf} -} - -@article{Pham1998, - title = {A Comparison of Rapid Prototyping Technologies}, - author = {Pham, D T and Gault, R S}, - year = {1998}, - journal = {Machine Tools \& Manufacture}, - volume = {38}, - pages = {1257--1287}, - keywords = {3d printing,fused deposition model-,lom,rapid prototyping,selective laser sintering,stereolithography}, - file = {/Users/fabio/Zotero/storage/D9T537PB/A comparison of rapid prototyping technologies.pdf} -} - -@article{Pham2003, - title = {Rapid Prototyping and Rapid Tooling\textemdash the Key Enablers for Rapid Manufacturing}, - author = {Pham, D T and Dimov, S S}, - year = {2003}, - month = jan, - journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science}, - volume = {217}, - number = {1}, - pages = {1--23}, - issn = {0954-4062}, - doi = {10.1243/095440603762554569}, - urldate = {2014-08-09}, - keywords = {rapid manufacturing,rapid prototyping,rapid tooling}, - file = {/Users/fabio/Zotero/storage/8LUWANN9/Rapid prototyping and rapid tooling—the key enablers for rapid manufacturing.pdf} -} - -@article{Pham2008, - title = {Deterioration of Polyamide Powder Properties in the Laser Sintering Process}, - author = {Pham, D T and Dotchev, K D and Yusoff, W A Y}, - year = {2008}, - month = nov, - journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science}, - volume = {222}, - number = {11}, - pages = {2163--2176}, - issn = {0954-4062}, - doi = {10.1243/09544062JMES839}, - keywords = {laser sintering,polyamide 12,rapid manufacturing,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/X3QNMPHV/Deterioration of polyamide powder properties in the laser sintering process.pdf} -} - -@article{phamIntegratingBayesianNetworks2021, - title = {Integrating {{Bayesian Networks}} into Ecosystem Services Assessment to Support Water Management at the River Basin Scale}, - author = {Pham, Hung Vuong and Sperotto, Anna and Furlan, Elisa and Torresan, Silvia and Marcomini, Antonio and Critto, Andrea}, - year = {2021}, - month = aug, - journal = {Ecosystem Services}, - volume = {50}, - pages = {101300}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101300}, - urldate = {2021-06-08} -} - -@article{Phelan2022, - ids = {phelan2022}, - title = {Plastic Pollution and Packaging: {{Corporate}} Commitments and Actions from the Food and Beverage Sector}, - author = {Phelan, Anna (Anya) and Meissner, Katie and Humphrey, Jacquelyn and Ross, Helen}, - year = {2022}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {331}, - pages = {129827}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.129827}, - urldate = {2021-12-10}, - abstract = {Plastic pollution is a pervasive and escalating global environmental problem, named among the most serious environmental issues globally, after climate change. A large percentage of the global plastic waste leakage is estimated to come from Asia, and most of this is from food and drink packaging. As a major user of single-use packaging, the food and beverage sector plays an important role in addressing plastic pollution, yet investigation of the uptake and transition to sustainable packaging by this industry sector remains limited. To contribute to filling this gap, a systematic review of 68 corporate sustainability reports was conducted to examine how major multinational companies in the food and beverage sector are addressing plastic pollution. This study focuses on how these companies address plastic pollution and packaging in their corporate sustainability reports, what sustainable packaging strategies they present, and how the companies address producer responsibility. The results show that the transition to sustainable packaging in the food and beverage sector is slow and inconsistent. Most corporate sustainability reports fail to address plastic pollution. There is a tendency for companies to report on collection and recycling, rather than sustainable packaging solutions aimed at systemic change. Producer responsibility concerning packaging is growing, however, most companies are doing very little to reduce plastic waste especially in regions lacking waste management infrastructure, such as those in emerging economies.}, - keywords = {Developing countries,Fast moving consumer goods,Plastic packaging,Plastic waste,Producer responsibility,Sustainable packaging}, - file = {/Users/fabio/Zotero/storage/SJRA75XA/Phelan et al. - 2022 - Plastic pollution and packaging Corporate commitm.pdf;/Users/fabio/Zotero/storage/ZWRACYYH/S0959652621040014.html} -} - -@article{Philippidis2020, - title = {Snakes and Ladders: {{World}} Development Pathways' Synergies and Trade-Offs through the Lens of the {{Sustainable Development Goals}}}, - author = {Philippidis, George and Shutes, Lindsay and M'Barek, Robert and Ronzon, T{\'e}v{\'e}cia and Tabeau, Andrzej and {van Meijl}, Hans}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {267}, - pages = {122147}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122147}, - urldate = {2020-05-26}, - abstract = {This paper takes three global visions of world development to 2050 and quantifies their implications for sustainable progress employing the metrics of the Sustainable Development Goals (SDGs). The SDG outcomes are structured through the interconnectivities of the three `wedding cake' layers of `economy', `society' and `biosphere', as posited by the Stockholm Resilience Centre. The key policy contribution is to quantify the resulting SDG synergies and trade-offs, whilst also decomposing and calculating the part-worth of the market drivers which contribute to these outcomes. The paper employs a global economic simulation model that combines rational market behaviour with environmental constraints (MAGNET) and is further extended with an SDG metrics module. A `non-sustainable' world reveals trade-offs between economy and biosphere SDGs, with population growth of particular concern to a safe planetary operating space in the world's poorest regions. Sustainable visions could reduce natural resource pressures and emissions and meet energy requirements at potentially limited economic cost. Notwithstanding, these futures do not address income inequalities and potentially increase food security concerns for the most vulnerable members of society. Consequently, developed region led international cooperation and in-kind income transfers to developing countries, constitutes a necessary prerequisite to help remedy the SDG trade-offs exhibited within the more sustainable global pathways.}, - keywords = {Bioeconomy,CGE modelling,Global foresight study,SDGs}, - file = {/Users/fabio/Zotero/storage/AV9ECZZR/full-text.pdf} -} - -@article{philippidisEatingYourGreens2021, - title = {Eating Your Greens: A Global Sustainability Assessment}, - author = {Philippidis, George and Ferrer P{\'e}rez, Hugo and {Gracia de Renter{\'i}a}, Pilar and M'barek, Robert and Sanju{\'a}n L{\'o}pez, Ana Isabel}, - year = {2021}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {168}, - pages = {105460}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105460}, - urldate = {2021-02-14}, - abstract = {The importance of healthy diets is woven into the fabric of the Sustainable Development Goals, although there is no clear metric to define it. Employing a simulation model (MAGNET), this study examines the sustainability implications arising from the adoption of recommended daily nutrition requirements inspired by the `Lancet' reference diet. To measure sustainability, changes in `virtual' requirements and associated tier footprints for irrigation (blue) water, agricultural land and greenhouse gas emissions (GHG) are calculated. Assuming business-as-usual food consumption trends, between 2015 and 2050 blue water, agricultural land and emissions rise 34\%, 9\% and 44\%, respectively, whilst corresponding increases in Sub-Saharan Africa are much higher. By 2050, the switch to the reference diet decreases agricultural land use by -8\% and emissions by -9\%. Global blue water and cropland requirements increase by 5\%, whilst significant concomitant savings in permanent pastureland (-21\%) are expected. By region, the diet switch drives rising blue water consumption in Oceania and the EU and agricultural land savings in Latin America and Oceania, accompanied by cropland increases in the EU and North Africa. The reference diet generates substantial reductions in GHG emissions, particularly in Latin America. Interestingly, Sub-Saharan Africa which abstains from the reference diet due to affordability considerations, benefits from a `rebound' effect from falling meat and dairy prices. Finally, the diet shift could result in marginal per capita food expenditure rises arising from demand driven fish price, particularly in more vulnerable world regions. This estimate does not capture, however, second-round economic growth effects arising from increased labour productivity and reduced public health expenditures.}, - keywords = {CGE modelling,Reference diet,Virtual commodities,{Water, land and GHG footprints}}, - file = {/Users/fabio/Zotero/storage/GEIQZZ8M/full-text.pdf} -} - -@article{Phillips2019, - title = {A Complex Adaptive Systems Agenda for Ecosystem Research Methodology}, - author = {Phillips, Mark A. and Ritala, Paavo}, - year = {2019}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {148}, - pages = {119739}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119739} -} - -@article{Phillips2020, - title = {Ecosystem Service Provision by Road Verges}, - author = {Phillips, Benjamin B. and Bullock, James M. and Osborne, Juliet L. and Gaston, Kevin J.}, - year = {2020}, - journal = {Journal of Applied Ecology}, - volume = {57}, - number = {3}, - pages = {488--501}, - issn = {13652664}, - doi = {10.1111/1365-2664.13556}, - abstract = {Roads form a vast, rapidly growing global network that has diverse, detrimental ecological impacts. However, the habitats that border roads (`road verges') form a parallel network that might help mitigate these impacts and provide additional benefits (ecosystem services; ES). We evaluate the capacity of road verges to provide ES by reviewing existing research and considering their relevant characteristics: area, connectivity, shape, and contextual ES supply and demand. We consider the present situation, and how this is likely to change based on future projections for growth in road extent, traffic densities and urban populations. Road verges not only provide a wide range of ES, including biodiversity provision, regulating services (e.g. air and water filtration) and cultural services (e.g. health and aesthetic benefits by providing access to nature) but also displace other habitats and provide ecosystem disservices (e.g. plant allergens and damage to infrastructure). Globally, road verges may currently cover 270,000~km2 and store 0.015~Gt~C/year, which will further increase with 70\% projected growth in the global road network. Road verges are well placed to mitigate traffic pollution and address demand for ES in surrounding ES-impoverished landscapes, thereby improving human health and well-being in urban areas, and improving agricultural production and sustainability in farmland. Demand for ES provided by road verges will likely increase due to projected growth in traffic densities and urban populations, though traffic pollution will be reduced by technological advances (e.g. electric vehicles). Road verges form a highly connected network, which may enhance ES provision but facilitate the dispersal of invasive species and increase vehicle\textendash wildlife collisions. Synthesis and applications. Road verges offer a significant opportunity to mitigate the negative ecological effects of roads and to address demand for ecosystem services (ES) in urban and agricultural landscapes. Their capacity to provide ES might be enhanced considerably if they were strategically designed and managed for environmental outcomes, namely by optimizing the selection, position and management of plant species and habitats. Specific opportunities include reducing mowing frequencies and planting trees in large verges. Road verge management for ES must consider safety guidelines, financial costs and ecosystem disservices, but is likely to provide long-term financial returns if environmental benefits are considered.}, - keywords = {ecosystem services,green infrastructure,highways,natural capital,pollution,road verges,roadside,traffic}, - file = {/Users/fabio/Zotero/storage/584V494P/Ecosystem service provision by road verges.pdf} -} - -@article{phillipsInterconnectionsSystemsHistory2021, - title = {Interconnections: {{A Systems History}} of {{Science}}, {{Technology}}, {{Leisure}}, and {{Fear}}}, - author = {Phillips, Fred}, - year = {2021}, - month = jan, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {7}, - number = {1}, - pages = {14}, - publisher = {{MDPI AG}}, - issn = {2199-8531}, - doi = {10.3390/joitmc7010014}, - urldate = {2021-01-13}, - abstract = {{$<$}p{$>$}It is well known that technological change causes social change, and vice versa. Using system and historical perspectives, this article examines that truth at a finer level of specificity, namely, that social perceptions of interconnectedness influence the progress of science and technology, and that conversely, as 21st-century technology makes us in fact more connected, society's anxieties shift. From the science/technology side, we look at interdisciplinary research, system and complexity theory, quantum tech, and the Internet, exploring how these interact and cause changes in social attitudes\textemdash fears, conspiracy theories, political polarization, and even entertainment trends\textemdash some of which are surprising, and some dangerous. The article's systems view helps make sense of current environmental, political, and psychological crises. It combines original ideas with those of several prominent thinkers, to suggest constructive actions.{$<$}/p{$>$}}, - keywords = {history of science and technology,science and society,systems,terror}, - file = {/Users/fabio/Zotero/storage/EHG52T9E/full-text.pdf} -} - -@article{phillipsMyPerspectivePeace2020, - title = {From My Perspective: {{Toward}} Peace Engineering}, - author = {Phillips, Fred}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120148}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120148}, - urldate = {2020-06-15} -} - -@article{phillipsMyPerspectiveStaying2021, - title = {From My Perspective: {{Staying}} Unchanneled}, - author = {Phillips, Fred}, - year = {2021}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {168}, - pages = {120789}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120789}, - urldate = {2021-04-29}, - abstract = {By reinforcing our past behavior or encouraging us to emulate our peers, social media and e-commerce algorithms channel our attention narrowly. This impedes our ability to perceive and connect diverse trends and phenomena, as our research requires. This essay focuses on one strategy \textendash{} monitoring popular literature \textendash{} for remaining unchanneled. The strategy reveals the reading public's fears and longings, and illustrates one way to help preserve one's capacity for independent thinking, synthesis and creativity.}, - keywords = {Algorithms,E-commerce,Fiction,Research,Serendipity,Social media} -} - -@article{phillipsStandardizingPreparationTest2022, - title = {Towards Standardizing the Preparation of Test Specimens Made with Material Extrusion: {{Review}} of Current Techniques for Tensile Testing}, - shorttitle = {Towards Standardizing the Preparation of Test Specimens Made with Material Extrusion}, - author = {Phillips, Clara and Kortschot, Mark and Azhari, Fae}, - year = {2022}, - month = oct, - journal = {Additive Manufacturing}, - volume = {58}, - pages = {103050}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2022.103050}, - urldate = {2022-08-11}, - abstract = {Researchers and industries rely heavily on standardized testing methods to ensure products are designed and manufactured with high quality. With increasing use of additive manufacturing processes, such as material extrusion (MEX), there is a significant gap in material testing standards tailored for such components, and a lack of guidance on preparing appropriate test specimens with mesostructures that best represent the final part being analyzed. This paper aims to support the standardization of MEX material testing by reviewing the current methods used for preparing test specimens for tensile testing and proposing guidelines for implementation in a new standard. The need for standardization of MEX specimen preparation is addressed by analyzing the effects of slicing parameters on resulting tensile properties of the specimen. It is suggested that a standard should acknowledge these parameters, in addition to specimen geometry, toolpath optimization, printer and material specifications, so that they are appropriately selected for the test specimen by regarding the final part structure. Consideration of the proposed guidelines in a standardized method may enable comparisons between published results and support the development of MEX technology for use in advanced applications.}, - langid = {english}, - keywords = {Additive manufacturing,Material characterization,Material extrusion,Slicing process parameters,Tensile testing,Testing standards}, - file = {/Users/fabio/Zotero/storage/VUBYRY5V/Phillips et al_2022_Towards standardizing the preparation of test specimens made with material.pdf;/Users/fabio/Zotero/storage/DU2CBSDU/S2214860422004420.html} -} - -@article{Phuong2019, - title = {Development of a Combined Analytical and Experimental Approach for the Determination of the Cohesive Strength between Material Extrusion Layers Using the True Area of Contact}, - author = {Phan, Thao Thi Phuong and Phan, The Quang and {Sherif El-Gizawy}, Ahmed}, - year = {2019}, - month = dec, - journal = {Additive Manufacturing}, - volume = {30}, - number = {February}, - pages = {100832}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100832}, - file = {/Users/fabio/Zotero/storage/A3GPP4XP/DEVELOPMENT OF A COMBINED ANALYTICAL AND EXPERIMENTAL APPROACH FOR THE DETERMINATION OF THE COHESIVE STRENGTH BETWEEN MATERIAL EXTRUSION LAYERS USING THE TRUE AREA OF CONTACT.pdf} -} - -@misc{PI, - title = {Plast'{{If}}}, - author = {{Plast'if}}, - year = {2020}, - howpublished = {https://www.plastif.com/} -} - -@article{Pickering2020, - title = {Participation in Residential Organic Waste Diversion Programs: {{Motivators}} and Optimizing Educational Messaging}, - author = {Pickering, Gary J. and Pickering, Hannah M.G. and Northcotte, Ashley and Habermebl, Catherine}, - year = {2020}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {158}, - pages = {104807}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104807}, - urldate = {2020-05-08}, - abstract = {Participation in residential organic-waste-diversion-programs (OWDP) represents an individual-level behaviour with significant environmental benefits, including lowering greenhouse gas emissions. This study of 2621 Niagara, Canada, residents sought to understand the attitudinal and sociodemographic drivers of participation and non-participation in OWDP. Additionally, we examined the impact of messaging about the benefits of OWDP on likelihood of future participation while varying the frame and perceived source of information. Participants reported environmental factors as the main motivators for OWDP involvement, while non-participants cited smell, inconvenience and cost as the most salient barriers. Several sociodemographic and knowledge factors predicted participation, as did strong recognition of the anthropogenic origins of climate change. Forty two percent of non-participants were more likely to participate after receiving the educational message, but this did not vary with information source nor a social-norm frame. These findings inform theory around pro-environmental behaviour and provide actionable information for education campaigns aimed at promoting OWDP.}, - keywords = {Climate change,Environmental education,Message framing,Motivators,Organic waste,Pro-environmental behavior} -} - -@article{Picuno2020, - title = {Decontamination and Recycling of Agrochemical Plastic Packaging Waste}, - author = {Picuno, Caterina and Alassali, Ayah and Sundermann, Michel and Godosi, Zoe and Picuno, Pietro and Kuchta, Kerstin}, - year = {2020}, - month = jan, - journal = {Journal of Hazardous Materials}, - volume = {381}, - pages = {120965}, - publisher = {{Elsevier B.V.}}, - issn = {03043894}, - doi = {10.1016/j.jhazmat.2019.120965}, - urldate = {2020-03-15}, - abstract = {Agrochemical containers shall undergo decontamination before being considered for recycling. This study provides an assessment on the feasibility of the triple-rinsing decontamination procedure, while evaluating the appropriateness of the material's quality for recycling. To achieve the objectives of the study, (1) the effectiveness of the decontamination procedure was investigated; (2) containers\textasciiacute{} long storage times and changes on the polymer\textasciiacute s structure were assessed; and (3) the quality of the recycled material was tested. Results showed that the triple-rinsing procedure was ineffective for the container\textasciiacute s complete decontamination, yet a further washing step \textendash{} performed during the simulation of the recycling process \textendash{} allowed for an improved degree of decontamination for recycling. Photo-oxidation imposed significant changes on the chemical structure of the polymer, where the active ingredient could be detected by FTIR, even after the application of rinsing and extraction. The chemical structure of the bulk material has not changed, indicating that the pesticide mobilization was only confined to the surface. The mechanical tests showed material quality appropriateness, where tensile strength values were within the suggested ranges, providing a possibility for further utilization of this material when appropriate decontamination is applied.}, - keywords = {Agricultural plastic waste,Agrochemical packaging recycling,Triple-rinsing decontamination}, - file = {/Users/fabio/Zotero/storage/5XMHHGNS/full-text.pdf} -} - -@article{picunoFlowsPostconsumerPlastic2021, - title = {Flows of Post-Consumer Plastic Packaging in {{Germany}}: {{An MFA-aided}} Case Study}, - author = {Picuno, Caterina and Alassali, Ayah and Chong, Zhi Kai and Kuchta, Kerstin}, - year = {2021}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {169}, - pages = {105515}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105515}, - urldate = {2021-02-28} -} - -@article{Piemonte2011, - title = {Bioplastic {{Wastes}}: {{The Best Final Disposition}} for {{Energy Saving}}}, - author = {Piemonte, V.}, - year = {2011}, - month = dec, - journal = {Journal of Polymers and the Environment}, - volume = {19}, - number = {4}, - pages = {988--994}, - issn = {1566-2543}, - doi = {10.1007/s10924-011-0343-z}, - urldate = {2014-07-23}, - keywords = {\'a recycling \'a,bioplastics \'a energy saving,environmental protection \'a lca}, - file = {/Users/fabio/Zotero/storage/M8GB5DV6/Bioplastic Wastes The Best Final Disposition for Energy Saving.pdf} -} - -@article{pieroniExpertSystemCircular2021, - title = {An Expert System for Circular Economy Business Modelling: Advising Manufacturing Companies in Decoupling Value Creation from Resource Consumption}, - author = {Pieroni, Marina P.P. and McAloone, Tim C. and Borgianni, Yuri and Maccioni, Lorenzo and Pigosso, Daniela C.A.}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {534--550}, - publisher = {{Elsevier B.V.}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.01.023}, - urldate = {2021-02-14}, - abstract = {Shortcomings in manufacturing companies' capabilities to execute circular economy business modelling have delayed a broader dissemination of circular business models beyond the stage of pilot projects in niche markets. Circular economy poses additional uncertainties for innovation that are not common for manufacturing companies' traditional activities and business as usual. To cope with such challenges, they lack systematised practices and proactive advice, which are scant in available literature and approaches. The paper presents the development of the tool Circular Economy Business Modelling Expert System within manufacturing companies, intended to address these limitations. Based on systematised business modelling practices for circular economy and proactive advice on potential circular business model configurations, the expert system enhances strategic thinking for circular economy, supporting companies to come up with varied alternative business models with reasonable and viable value propositions to deploy circular benefits accordingly. The expert system was streamlined based on literature review, development, testing and evaluation with 12 practitioners from 10 companies. The paper discusses the main functionalities of the expert system and the results of its application into varied manufacturing companies. The application of the expert system has demonstrated to benefit companies with: inspiration for best practices on circular business modelling, a structured framework for confirming assumptions and a logic structure that prompts decision-making and reduces uncertainties.}, - keywords = {business model,circular economy,innovation,sustainability,tool} -} - -@article{pietzschBenefitsChallengesCritical2017, - title = {Benefits, Challenges and Critical Factors of Success for {{Zero Waste}}: {{A}} Systematic Literature Review}, - author = {Pietzsch, Nat{\'a}lia and Ribeiro, Jos{\'e} Luis Duarte and {de Medeiros}, Janine Fleith}, - year = {2017}, - month = sep, - journal = {Waste Management}, - volume = {67}, - pages = {324--353}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2017.05.004}, - urldate = {2021-08-02}, - abstract = {Considering the growing concern with solid wastes problems and the pressing need for a holistic approach to their management, this study developed a literature review about the subject ``Zero Waste''. To that end, a systematic literature review was executed, through which 102 published articles were analyzed with the aim to, initially, comprehend the concept of Zero Waste, and, then, map its benefits, challenges, and critical success factors. The results show that scholars have not reached a consensus regarding the concept of ZW. While some studies fully address this philosophy, other studies are based on just one or on some of its topics. The benefits were grouped and organized into four dimensions: benefits to the community, financial-economic benefits, benefits to the environment and benefits to the industry and stakeholders. As to the challenges, barriers were identified both in the macro environment (mainly political and cultural) and in the meso and micro environments (stakeholders, industries, and municipalities). The analysis of the articles enabled listing critical success factors, supported by a set of activities that must be carried out. Regarding future studies, it is worth noting that more empirical studies about ZW implementation are necessary, particularly with regard to educational practices designed to promote changes in user behavior.}, - keywords = {Recycling and reuse,Waste management,Waste mitigation,Waste reduction} -} - -@article{Pigeonneau2019, - title = {Heating and Flow Computations of an Amorphous Polymer in the Liquefier of a Material Extrusion {{3D}} Printer}, - author = {Pigeonneau, F. and Xu, D. and Vincent, M. and Agassant, J.-F.}, - year = {2019}, - month = dec, - journal = {Additive Manufacturing}, - pages = {101001}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.101001} -} - -@article{Pignatelli2005, - title = {{{ANALYZING THE PAST TO PREPARE FOR THE FUTURE}}: {{WRITING A LITERATURE REVIEW}}}, - author = {Pignatelli, Pasquale and Sanguigni, Valerio and Paola, Sciacca Giordano and Lo Coco, Emanuela and Lenti, Luisa and Violi, Francesco}, - year = {2005}, - journal = {Free Radical Biology and Medicine}, - volume = {38}, - number = {12}, - pages = {1662--1666}, - issn = {08915849}, - doi = {10.1016/j.freeradbiomed.2005.02.032}, - abstract = {Upon stimulation with agonists, platelets express CD40 ligand (CD40L), a transmembrane protein implicated in the initiation and progression of atherosclerotic disease. We have recently discovered that oxidative stress plays a major role in platelet CD40L expression. In this study, we sought to determine whether vitamin C, a known antioxidant, is able to influence platelet CD40L expression. In vitro experiments were done by stimulating platelets with collagen in the presence or absence of vitamin C (50-100 {$\mu$}M) or vehicle as control. An in vivo study was done in 10 healthy subjects who were randomized to intravenous infusion of placebo or 1 g vitamin C for 45 min in a crossover design. At the end of infusion platelet CD40L and O2- were measured. The in vitro study demonstrated that vitamin C dose dependently inhibited platelet CD40L expression without affecting agonist-induced platelet aggregation. In subjects treated with placebo no changes of platelet CD40L and O2- were observed; conversely, vitamin C infusion caused a significant and parallel decrease of platelet O2- (-70\%, P {$<$} 0.001) and CD40L (-68\%, P {$<$} 0.001). Platelet aggregation was not modified by either treatment. This study suggests that water-soluble antioxidants, which scavenge superoxide radicals, may reduce platelet CD40L expression. \textcopyright{} 2005 Elsevier Inc. All rights reserved.}, - pmid = {15917194}, - keywords = {Free radicals/free-radical scavengers,Platelets,Reactive oxygen species,Vitamin C}, - file = {/Users/fabio/Zotero/storage/2G3AAW3F/ANALYZING THE PAST TO PREPARE FOR THE FUTURE WRITING A LITERATURE REVIEW.pdf} -} - -@article{pigossoMakingTransitionCircular2021, - title = {Making the Transition to a {{Circular Economy}} within Manufacturing Companies: The Development and Implementation of a Self-Assessment Readiness Tool}, - author = {Pigosso, Daniela C.A. and McAloone, Tim C.}, - year = {2021}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {28}, - pages = {346--358}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.05.011}, - urldate = {2021-06-15} -} - -@article{Pilipovic2007, - title = {Experimental Analysis of Properties of Materials for Rapid Prototyping}, - author = {Pilipovi{\'c}, Ana and Raos, Pero and {\v S}ercer, Mladen}, - year = {2007}, - month = dec, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {40}, - number = {1-2}, - pages = {105--115}, - issn = {0268-3768}, - doi = {10.1007/s00170-007-1310-7}, - urldate = {2015-01-31}, - keywords = {3d printing,hybrid polyjet technique,mechanical properties of materials,roughness of surface}, - file = {/Users/fabio/Zotero/storage/RLX3WMSQ/Pilipović, Raos, Šercer - 2007 - Experimental analysis of properties of materials for rapid prototyping.pdf} -} - -@article{Pillin2008, - title = {Effect of Thermo-Mechanical Cycles on the Physico-Chemical Properties of Poly(Lactic Acid)}, - author = {Pillin, Isabelle and Montrelay, Nicolas and Bourmaud, Alain and Grohens, Yves}, - year = {2008}, - month = feb, - journal = {Polymer Degradation and Stability}, - volume = {93}, - number = {2}, - pages = {321--328}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2007.12.005}, - urldate = {2014-06-16}, - keywords = {biodegradable,crystallization,molecular weight,recycling,rheology}, - file = {/Users/fabio/Zotero/storage/E6L5QQX7/Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid).pdf} -} - -@article{pimentelpincelliPostconsumerPlasticPackaging2021, - title = {Post-Consumer Plastic Packaging Waste Flow Analysis for {{Brazil}}: {{The}} Challenges Moving towards a Circular Economy}, - author = {Pimentel Pincelli, Isabella and {Borges de Castilhos J{\'u}nior}, Armando and Seleme Matias, Marcelo and Wanda Rutkowski, Em{\'i}lia}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {126}, - pages = {781--790}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.04.005}, - urldate = {2021-04-29} -} - -@article{pinhaSystemDynamicsModelling2020, - title = {A System Dynamics Modelling Approach for Municipal Solid Waste Management and Financial Analysis}, - author = {Pinha, Augusto Cesar Hernandes and Sagawa, Juliana Keiko}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {269}, - pages = {122350}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122350}, - urldate = {2020-06-22}, - abstract = {In face of the population and economic growth of the 20th century, solid waste management (SWM) has become one of the most critical public policy issues challenging state and local governments. Although some developed countries are advanced in this matter, the regulatory acts that rule solid waste management in some developing countries is very recent. Public managers should have modelling and simulation tools at hand in order to make sound decisions, grounded on data and projections. This paper presents a System Dynamics (SD) model for municipal solid waste management which provides a comprehensive view of the involved resources, the destinations of waste and the cost structure of the service/system. Existing similar studies do not provide this extensive view, including the various resources involved (staff, fleet, other assets), the different destinations for waste, the different recycling streams and associated revenues and, specially, the cost structure, altogether, in the same model. Another branch of models concerns the assessment and optimization of specific policies, such as waste disposal charging fees (WDCF), which is not the aim of this study. Its main contribution is to present a financial planning tool for managers, allowing a scenario analysis to support strategic or tactic decisions, such as capacity expansions, investments in operational improvement, and so on. The modular design of the model aims at providing capability of generalization and application to different contexts and regions. As a case study, the context of a Brazilian city of 230,000 inhabitants was modelled and scenarios for 10 years were proposed. The scenario that presented better results with feasible investments prescribes an increase from 8.5\% to 15\% in the public collection of dry waste together with a productivity improvement of the sorting process. The simulations showed that the revenues from the recyclables do not cover the expenditures of the service provider and also allowed pointing out scenarios that make the provider less dependent of governmental subsidy. The results allowed proposing an extended conceptual SD model to be tested in future works, containing mechanisms suitable to the studied context for influencing recycling behaviour. Solid waste management in Brazil and in other developing countries is incipient and some managers do not have formal education in management. The improvement of managers' awareness about the cost structure of the SWM system represents a relevant social implication of this study.} -} - -@article{Pinho2020, - title = {{{3D}} Printing Goes Greener: {{Study}} of the Properties of Post-Consumer Recycled Polymers for the Manufacturing of Engineering Components}, - author = {Pinho, Ana C and Amaro, Ana M and Piedade, Ana P}, - year = {2020}, - journal = {Waste Management}, - volume = {118}, - pages = {426--434}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.09.003}, - urldate = {2021-01-15}, - abstract = {This study concerns the evaluation of several properties/characteristics of 3D printed poly(lactic acid) (PLA) polymer and acrylonitrile\textendash butadienestyrene (ABS) copolymer, recycled from food packages and car dashboards, respectively. The aim is to evaluate the potential of recycled polymers that are recovered from solid polymer waste (SPW) to be reused for functional components/parts for add-value applications. The study compared the performance of the recycled material with the obtained from the 3D printing of virgin polymer. The characterization was made considering the chemical, thermal and mechanical properties as well as surface roughness and wettability. Although the thermal characterization did not indicate significant variations between recycled and virgin material, the mechanical recycling process induced some chain scission in PLA. Consequently, the semi-crystalline polymer revealed losses of 33\% both in tensile stress and flexural strength. On the contrary, recycled ABS did not show changes in the mechanical properties of the printed specimens. Both recycled polymers produced smoother surfaces with a decrease of the mean surface roughness between 55\% and 65\%. Considering the properties required by manufacturers of food containers and car dashboards, this study indicates that recycled materials can be reused for the same applications.}, - pmid = {32966947}, - keywords = {3D printing,ABS,PLA,Recycled and reused polymers,Solid plastic waste,Sustainable production}, - file = {/Users/fabio/Zotero/storage/4X3V3L5K/full-text.pdf} -} - -@article{Pinto2020, - title = {Supply Chain Integration Strategies and Circularity in the {{European}} Steel Industry}, - author = {Pinto, Julian T.M. and Diemer, Arnaud}, - year = {2020}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {153}, - pages = {104517}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104517} -} - -@article{pintoCreationDystopiasAlternative2021, - title = {The Creation of Dystopias as an Alternative for Imagining and Materializing a University of the Future}, - author = {Pinto, Jean Paul and {Ram{\'i}rez-Angulo}, Juli{\'a}n and Crissien, Tito J. and {Bonett-Balza}, Kateryn}, - year = {2021}, - month = sep, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2021.102832}, - urldate = {2021-09-15} -} - -@article{pintodacostaEnvironmentalImpactsPlastics2020, - title = {The Environmental Impacts of Plastics and Micro-Plastics Use, Waste and Pollution: {{EU}} and National Measures}, - shorttitle = {The Environmental Impacts of Plastics and Micro-Plastics Use, Waste and Pollution}, - author = {Pinto Da Costa, Jo{\~a}o and {Rocha-Santos}, Teresa and Duarte, Armando C. and of Chemistry, Department and CESAM and of Aveiro, University and Portugal}, - year = {2020}, - month = oct, - publisher = {{EPRS: European Parliamentary Research Service}}, - urldate = {2022-09-01}, - abstract = {This study, commissioned by the European Parliament's Policy Department for Citizens' Rights and Constitutional Affairs at the request of the Committee on Petitions (PETI), focuses on the pervasive use of plastics and reviews the rising consensus on the potential eco-toxicological impacts of these materials, in particular of smaller plastic particles, dubbed microplastics. It discusses possible mitigation strategies aimed at curtailing the prevalence of (micro)plastics, as well as emerging alternatives and their environmental adequacy. Propelled by increasing awareness of the impacts of plastics and by public opinion, in recent years a multitude of norms, regulations, laws and recommendations have been proposed and/or implemented. These vary greatly across local, national, regional and international levels, and it is not clear what the beneficial impacts of these tools are. This study assesses these existing instruments, analyses whether they are based on sound scientific data, and discusses foreseeable challenges that could restrain the relevance and suitability of existing and future legislative proposals.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/FUW98CH7/2041108.html} -} - -@article{pintoNewGreenDynamic2020, - title = {Towards a New, Green and Dynamic Scoring Tool, {{G2}}, to Evaluate Products and Processes}, - author = {Pinto, Jos{\'e} and Barroso, Telma and {Capit{\~a}o-Mor}, Jorge and {Aguiar-Ricardo}, Ana}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {276}, - pages = {123079}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2020.123079}, - urldate = {2020-08-13} -} - -@article{Pinzone2019, - title = {Effects of `Green' Training on pro-Environmental Behaviors and Job Satisfaction: {{Evidence}} from the {{Italian}} Healthcare Sector}, - author = {Pinzone, Marta and Guerci, Marco and Lettieri, Emanuele and Huisingh, Donald}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {226}, - pages = {221--232}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.048}, - urldate = {2020-05-21}, - abstract = {Literature of cleaner production shows that, for improving the environmental performance of the organization, it is important to provide employees with specific green-related competencies and to buy their commitment towards the green cause. Accordingly, studies explored the effects on environmental performance of green human resource management, in which green training (i.e. interventions aimed at developing green-related competencies) resulted as a key practice. This paper enriches the fast growing literature on green training in two directions. First, showing that green training is associated with employees engagement in voluntary pro-environmental behaviours; our evidence shows this relationship is mediated by the fact that green training enacts a sense of challenge in employees, which motivates them to engage in green-oriented discretionary effort. Second, the paper shows that \textendash{} diversely from other types of training - green training makes employees more satisfied with their jobs; this relationship emerged as mediated by the employees' perception that green training is as a form of support provided by their employer, which makes their professional experience more satisfying. Those results are achieved through a survey to 260 healthcare professionals. This sector was selected as an extreme case, as current research has demonstrated that it is hard for healthcare professionals \textendash{} given their organizational autonomy, and professional values - to engage in green-related behaviours, and to see their employer's support on the green cause as a driver for their job satisfaction. Implication for theory and practice are presented and discussed.} -} - -@article{piresStrategiesReachGlobal2021, - title = {Strategies to Reach Global Sustainability Should Take Better Account of Ecosystem Services}, - author = {Pires, Aliny P.F. and Rodriguez Soto, Clarita and Scarano, Fabio R.}, - year = {2021}, - month = jun, - journal = {Ecosystem Services}, - volume = {49}, - pages = {101292}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101292}, - urldate = {2021-06-08} -} - -@article{pirsonAssessingEmbodiedCarbon2021, - title = {Assessing the Embodied Carbon Footprint of {{IoT}} Edge Devices with a Bottom-up Life-Cycle Approach}, - author = {Pirson, Thibault and Bol, David}, - year = {2021}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {322}, - pages = {128966}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128966}, - urldate = {2021-09-27} -} - -@article{pitkanenHowMeasureSocial2023, - title = {How to Measure the Social Sustainability of the Circular Economy? {{Developing}} and Piloting Social Circular Economy Indicators in {{Finland}}}, - shorttitle = {How to Measure the Social Sustainability of the Circular Economy?}, - author = {Pitk{\"a}nen, K. and Karppinen, T. K. M. and Kautto, P. and Pirtonen, H. and Salmenper{\"a}, H. and Savolahti, H. and Schubin, E. and Myllymaa, T.}, - year = {2023}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {392}, - pages = {136238}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136238}, - urldate = {2023-02-12}, - abstract = {The purpose of the study was to research the possibility and methods of measuring the social sustainability of the circular economy (CE) transition nationally and sub-nationally in Finland based on secondary and regularly updated data. The aim was to assess both the social impacts of, and socio-cultural changes needed for, the transition. Expert elicitation method was used to develop experimental pilot indicators for Finland that would cover different types of social implications and CE principles and be based on secondary data sources. 12 indicators proceeded into piloting and data collection. The study confirmed the difficulty of monitoring the social sustainability for two main reasons. First, social outcomes are often very contextual and the result of complex personal and inter-personal relations, and they are difficult to connect to only the CE development. Second, the conventional data sources are based on a linear logic and are not fit to measure the circular processes. The monitoring results show weak signs for a socially just development and socio-cultural change towards the CE. The study answers to the research gap between CE practices and conceptual frameworks for monitoring the social sustainability of the CE. The real-world national and sub-national monitoring based on data readily available in regularly updated open databases was piloted to allow continuous monitoring to support strategic regional development. The study presents a model for an iterative and systemic process to develop social indicators for the CE that can also be applied outside of Finland.}, - langid = {english}, - keywords = {Circular economy,Finland,Indicators,Social impacts,Social sustainability}, - file = {/Users/fabio/Zotero/storage/TJE8PZ3C/Pitkänen et al_2023_How to measure the social sustainability of the circular economy.pdf;/Users/fabio/Zotero/storage/4FLHQY4G/S0959652623003967.html} -} - -@article{Pitt2017, - title = {Investigation into the Material Properties of Wooden Composite Structures with In-Situ Fibre Reinforcement Using Additive Manufacturing}, - author = {Pitt, Kate and {Lopez-Botello}, Omar and Lafferty, Austin D. and Todd, Iain and Mumtaz, Kamran}, - year = {2017}, - journal = {Composites Science and Technology}, - volume = {138}, - pages = {32--39}, - publisher = {{Elsevier Ltd}}, - issn = {02663538}, - doi = {10.1016/j.compscitech.2016.11.008}, - abstract = {In contrast to subtractive manufacturing techniques, additive manufacturing processes are known for their high efficiency in regards to utilisation of feedstock. However the various polymer, metallic and composite feedstocks used within additive manufacturing are mainly derived from energy consuming, inefficient methods, often originating from non-sustainable sources. This work explores the mechanical properties of additively manufactured composite structures fabricated from recycled sustainable wood waste with the aim of enhancing mechanical properties through glass fibre reinforcement. In the first instance, samples were formed by pouring formulation of wood waste (wood flour) and thermosetting binder (urea formaldehyde), with and without glass fibres, into a mould. The same formulations were used to additively manufacture samples via a layered deposition technique. Samples manufactured using each technique were cured and subsequently tested for their mechanical properties. Additively manufactured samples had superior mechanical properties, with up to 73\% increase in tensile strength compared to moulded composites due to a densification of feedstock/paste and fibre in-situ directional alignment.}, - keywords = {Extrusion,Glass fibres,Layered structures,Short-fibre composites,Wood}, - file = {/Users/fabio/Zotero/storage/433LN9J8/Investigation into the material properties of wooden composite structures with in-situ fibre reinforcement using additive manufacturing.pdf} -} - -@article{Pivetti2020, - title = {Predicting Recycling in {{Southern Italy}}: {{An}} Exploratory Study}, - author = {Pivetti, Monica and Melotti, Giannino and Vespa, Mariangela and Cappabianca, Francesca and Troilo, Fabio and Placentino, Matteo Pio}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {156}, - pages = {104727}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104727} -} - -@article{Piwowar-Sulej2021, - title = {Environmental Entrepreneurship \textendash{} {{Bibliometric}} and Content Analysis of the Subject Literature Based on {{H-Core}}}, - author = {{Piwowar-Sulej}, Katarzyna and Krzywonos, Ma{\l}gorzata and Kwil, Izabela}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {295}, - pages = {126277}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126277}, - urldate = {2021-02-28}, - abstract = {Business is not only an important perpetrator of the environmental problems, but it also plays a key role in successfully addressing them. In the process of solving environmental problem not only the role of large companies but also entrepreneurs has been noticed. Environmental entrepreneurship (otherwise referred to as ``ecopreneurship'') can be defined as the process of entrepreneurship applied in order to create businesses that solve environmental problems or operate sustainably. Despite the growing interest in environmental entrepreneurship, the academic literature on the subject is still in a nascent stage which justifies carrying out analyses in this area. The purpose of the study is, through a bibliometric analysis, to reflect the status of the environmental entrepreneurship field, identify key research areas and establish future directions for research. The article presents previous literature studies and intend to fill the identified gap in terms of queries, databases, research period and methodology. In particular we applied H-Classics methodology and in-depth content analysis of 318 sample articles which has not been used in previous studies. The analysis led to identifying four research sub-areas of environmental entrepreneurship within the document sample. Directions of further research are such areas of exploration as factors influencing entrepreneurial actions (external e.g. institutional factors, internal \textendash{} including psychological factors) and the importance of various entities in the development of sustainable entrepreneurship (which includes ecopreneurship). There is also the need to look at entrepreneurship from multiple scientific perspectives and the necessity to carry out research eliminating the limitations of previous research projects. Due to the fact that entrepreneurship is a dynamic phenomenon, it has been stressed on several occasions that there is a need for conducting longitudinal research.}, - keywords = {Bibliometric analysis,Ecopreneur,Environment,Environmental entrepreneurship,Environmental issue,Sustainable entrepreneurship}, - file = {/Users/fabio/Zotero/storage/YXNYUTIN/full-text.pdf} -} - -@article{Piyathanavong2019, - title = {The Adoption of Operational Environmental Sustainability Approaches in the {{Thai}} Manufacturing Sector}, - author = {Piyathanavong, Vichathorn and {Garza-Reyes}, Jose Arturo and Kumar, Vikas and {Maldonado-Guzm{\'a}n}, Gonzalo and Mangla, Sachin Kumar}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {507--528}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.093} -} - -@article{plankDoingMoreLess2021, - title = {Doing More with Less: {{Provisioning}} Systems and the Transformation of the Stock-Flow-Service Nexus}, - author = {Plank, Christina and Liehr, Stefan and Hummel, Diana and Wiedenhofer, Dominik and Haberl, Helmut and G{\"o}rg, Christoph}, - year = {2021}, - month = sep, - journal = {Ecological Economics}, - volume = {187}, - pages = {107093}, - publisher = {{Elsevier BV}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107093}, - urldate = {2021-06-08}, - abstract = {Physical components of societies like infrastructures need biophysical resources for their construction, maintenance and use. These components, analyzed as societies' material stocks, predefine energy and raw materials and provide societal services, necessary for their functioning and for social welfare. The nexus between stocks, the resource flows and the services, is crucial for the analysis of social-ecological transformations. In this paper, we build on recent work in socio-metabolic research on the stock-flow-service nexus and develop a conceptual approach how to examine this nexus while addressing the challenges of social-ecological transformations. We refer to the concept of provisioning systems to analyze the institutions, technologies, knowledge and practices mediating between actors and resources but also the power relations involved in the creation and transformation of this nexus. It enables us to understand how specific stock-flow-service nexuses are constructed, which lock-in effects result from specific stock-flow-service configurations and which options can be envisaged for its transformation towards lower resource use. We argue that provisioning systems need to be analyzed as structuring space and time as well as embedded within the contested terrain of the state. By providing this conceptualization, we aim to offer an understanding which can help to define options for the transformation of the stock-flow-service nexus in a transdisciplinary process.}, - file = {/Users/fabio/Zotero/storage/SN8RSFUG/full-text.pdf} -} - -@misc{PlascticEurope2020, - title = {Plastics \textendash{} the {{Facts}} 2020 {{An}} Analysis of {{European Production}} Demand and Waste Data}, - author = {{Plasctic Europe -}}, - year = {2020}, - journal = {Plastic Europe}, - pages = {1--64}, - urldate = {2022-03-07}, - abstract = {Plastics - the Facts 2019}, - howpublished = {https://plasticseurope.org/knowledge-hub/plastics-the-facts-2020/} -} - -@misc{PlasticBank, - title = {The {{Plastic Bank}}}, - author = {Bank, Plastic}, - year = {2020}, - urldate = {2015-07-02}, - howpublished = {https://plasticbank.com/who-we-are/} -} - -@misc{Plastics2014, - title = {{{PlasticsEurope}} - {{Plastics}} \textendash{} the {{Facts}} 2014/2015}, - author = {{PlasticsEurope}}, - year = {2015}, - pages = {1--32}, - urldate = {2015-06-29}, - abstract = {An analysis of European plastics production, demand and recovery for 2010}, - file = {/Users/fabio/Zotero/storage/TAEUK5LS/m-api-71c99a63-ca66-c523-18a6-d999f4f04ca1.pdf} -} - -@misc{Plastics2019, - title = {Plastics - the {{Facts}} 2019}, - author = {Plastics, Europe}, - year = {2019}, - urldate = {2020-03-17}, - abstract = {Plastics - the Facts 2019}, - howpublished = {https://www.plasticseurope.org/fr/resources/publications/1804-plastics-facts-2019}, - file = {/Users/fabio/Zotero/storage/FYI87Z96/Plastics Europe 2019.pdf} -} - -@misc{PlasticsRecyclingWorldwide, - title = {Plastics Recycling Worldwide: Current Overview and Desirable Changes}, - urldate = {2022-03-07}, - howpublished = {https://journals.openedition.org/factsreports/5102} -} - -@misc{PlastiqueMieuxComprendre, - title = {Plastique : Mieux Comprendre Le Recyclage Des Emballages \textendash{} {{ADEME}}}, - urldate = {2021-05-03}, - howpublished = {https://www.ademe.fr/plastique-mieux-comprendre-recyclage-emballages} -} - -@inproceedings{Podmetina2015, - title = {What Skills and Competences Are Required to Implement Open Innovation?}, - booktitle = {{{ISPIM}} Conf. {{Proc}}.}, - author = {Podmetina, Daria and Hafkesbrink, Joachim and Teplov, Roman and Dabrowska, Justyna and Petraite, Monika}, - year = {2015}, - pages = {1--20}, - publisher = {{The International Society for Professional Innovation Management (ISPIM)}}, - address = {{Manchester}}, - abstract = {Once companies open up their innovation process, the internal structures change, new tasks and challenges emerge, and employees are no longer expected to have technical-scientific or managerial expertise only but in addition, they should possess certain specific competences and skills. However, the description of these required capabilities often remains vague. This paper focuses on the human resource involved in and driving open innovation: competences and skills for open innovation professionals. We developed and validated scales for measurement open innovation skills and proposed the open innovation specialist profile. In addition, we analyse the differences in open innovation skills depending on the stage of open innovation implementation in the firm, size of the firm, country and industry. This research is based on the large-scale European survey, including 528 large, medium, and small companies from 35 countries located in Europe.} -} - -@article{Pohl2019, - title = {How {{LCA}} Contributes to the Environmental Assessment of Higher Order Effects of {{ICT}} Application: {{A}} Review of Different Approaches}, - author = {Pohl, Johanna and Hilty, Lorenz M. and Finkbeiner, Matthias}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {219}, - pages = {698--712}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.018} -} - -@article{Pohlen2014, - title = {Reverse {{Logistics}} in {{Plastics Recycling Fulltext Options}} : {{Policies}} \& {{Information}}}, - author = {Pohlen, Terrance L and Farris, M Theodore and Logistics, Reverse}, - year = {2014}, - number = {7}, - pages = {6--7}, - isbn = {0960003921002}, - file = {/Users/fabio/Zotero/storage/WZTF8VSH/Reverse Logistics in Plastics Recycling Fulltext Options Policies & Information.pdf} -} - -@article{Poirier2013, - title = {Analyse de La Variance et de La R\'egression . {{Plans}} d 'exp\'erience}, - author = {Poirier, Jacques}, - year = {2013}, - journal = {Techniques de l'ingenieur}, - volume = {33}, - number = {0}, - pages = {0--21}, - file = {/Users/fabio/Zotero/storage/ZJ3EXFGB/Analyse de la variance et de la régression . Plans d ’expérience.pdf} -} - -@article{poirierJoinBookReview2021, - title = {Join Book Review of Anarchism and Ecological Economics and Utopia in the {{Anthropocene}} | {{Anarchism}} and {{Ecological Economics}}: {{A Transformative Approach}} to a {{Sustainable Future}}, {{Ove Daniel Jakobsen}}, {{Routledge}}, {{Abingdon}}, {{Oxon}}, {{UK}} (2019), \$160 {{Hardcover}} ({{ISBN}} 9781138597587), \$48.95 Softcover ({{ISBN}} 9780367664459), \$34.26 {{Ebook}} ({{ISBN}} 9780429486876). 218 Pages {{Utopia}} in the {{Anthropocene}}: {{A Change Plan}} for a {{Sustainable}} and {{Equitable World}}, {{Michael Harvey}}, {{Routledge}}, {{Abingdon}}, {{Oxon}}, {{UK}} (2019), \$160 {{Hardc}}}, - author = {Poirier, Nathan}, - year = {2021}, - month = nov, - journal = {Ecological Economics}, - volume = {189}, - pages = {107158}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107158}, - urldate = {2021-08-21} -} - -@article{Polasky2015, - title = {Setting the Bar: {{Standards}} for Ecosystem Services}, - author = {Polasky, Stephen and Tallis, Heather and Reyers, Belinda}, - year = {2015}, - month = jun, - journal = {Proceedings of the National Academy of Sciences of the United States of America}, - volume = {112}, - number = {24}, - pages = {7356--7361}, - publisher = {{National Academy of Sciences}}, - issn = {10916490}, - doi = {10.1073/pnas.1406490112}, - urldate = {2021-04-23}, - abstract = {Progress in ecosystem service science has been rapid, and there is now a healthy appetite among key public and private sector decision makers for this science. However, changing policy and management is a long-term project, one that raises a number of specific practical challenges. One impediment to broad adoption of ecosystem service information is the lack of standards that define terminology, acceptable data and methods, and reporting requirements. Ecosystem service standards should be tailored to specific use contexts, such as national income and wealth accounts, corporate sustainability reporting, land-use planning, and environmental impact assessments. Many standard-setting organizations already exist, and the research community will make the most headway toward rapid uptake of ecosystem service science by working directly with these organizations. Progress has been made in aligning with existing organizations in areas such as product certification and sustainability reporting, but a major challenge remains in mainstreaming ecosystem service information into core public and private use contexts, such as agricultural and energy subsidy design, national income accounts, and corporate accounts.}, - pmid = {26082540}, - keywords = {Accounting,Mainstreaming,Natural capital,Service provision,Value}, - file = {/Users/fabio/Zotero/storage/NKRGV7RR/full-text.pdf} -} - -@article{poliChallengesFuturesLiteracy2021, - title = {The {{Challenges}} of {{Futures Literacy}}}, - author = {Poli, Roberto}, - year = {2021}, - month = jul, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102800}, - urldate = {2021-07-05} -} - -@article{Polido2019, - title = {Sustainable Development Discourse in {{Smart Specialization Strategies}}}, - author = {Polido, Alexandra and Pires, Sara Moreno and Rodrigues, Carlos and Teles, Filipe}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {240}, - pages = {118224}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118224} -} - -@article{pollexSurrenderingGrowthEuropean2018, - title = {Surrendering to Growth? {{The European Union}}'s Goals for Research and Technology in the {{Horizon}} 2020 Framework}, - shorttitle = {Surrendering to Growth?}, - author = {Pollex, Jan and Lenschow, Andrea}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - series = {Technology and {{Degrowth}}}, - volume = {197}, - pages = {1863--1871}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2016.10.195}, - urldate = {2022-10-11}, - abstract = {The European Union is one of the major global players in environmental protection and sustainability policy, and increasingly addresses themes such as human wellbeing, global justice and development. Grounded in the degrowth literature, this paper asks how the European Union measures progress, economic development and the relevance of environmental protection. Specifically, this article aims at tracing degrowth elements in the Horizon 2020 program, i.e. the research and innovation agenda and funding scheme of the Union, which constitutes one of the European Union's major instruments for steering economic development. Employing a frame analysis this research detects a minor agenda pointing beyond conventional growth perspectives; however, conventional growth remains the central focus in the Horizon 2020 framework even where ``green growth'' measures are discussed. This research shows that this pattern is especially evident in technology policy and schemes related to information and communication technology in particular. The article reflects on the rationales for why the European Union pursues only a minor degrowth agenda. It points to a neoliberal meta-frame and to the effects of path dependency related to the Union's common market conceived of as a driver of prosperity. Finally, the paper identifies comparative policy analysis as a promising area for deeper integration of degrowth theory in political science research.}, - langid = {english}, - keywords = {Degrowth and policy,European Union,Horizon 2020,Information and communication technology,Research policy,Sustainability}, - file = {/Users/fabio/Zotero/storage/Z2CNVKSA/Pollex y Lenschow - 2018 - Surrendering to growth The European Union's goals.pdf;/Users/fabio/Zotero/storage/Y94CVLBM/S0959652616318261.html} -} - -@article{Polonsky2022, - ids = {polonsky2022}, - title = {Identifying the Drivers and Barriers of the Public Sector Procurement of Products with Recycled Material or Recovered Content: {{A}} Systematic Review and Research Propositions}, - author = {Polonsky, Michael Jay and Wijayasundara, Mayuri and Noel, Winston and Vocino, Andrea}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {358}, - pages = {131780}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2022.131780}, - urldate = {2022-05-23} -} - -@article{polyportisConsumerAcceptanceProducts2022, - title = {Consumer Acceptance of Products Made from Recycled Materials: {{A}} Scoping Review}, - shorttitle = {Consumer Acceptance of Products Made from Recycled Materials}, - author = {Polyportis, Athanasios and Mugge, Ruth and Magnier, Lise}, - year = {2022}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {186}, - pages = {106533}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106533}, - urldate = {2022-08-11}, - abstract = {Consumers have a positive attitude towards products made from recycled materials; however, they frequently end up not purchasing them. To shed light on the factors that influence consumer preferences and acceptance of products made from recycled materials, a scoping review was conducted with the following objectives: (1) to explore which factors are drivers of the acceptance of products made from recycled materials, (2) to identify and analyse potential barriers for their adoption, and (3) to formulate recommendations for future research in order to further enhance choices of alternatives made from recycled materials. The review of the results from 46 articles demonstrated that factors such as environmental benefits, perceived quality, safety, risks, emotions, and individual differences influence consumer acceptance of products made from recycled materials. The present review presents the state-of-the-art of the existing literature and future potential directions that can be fruitful for academics and practitioners interested in the topic.}, - langid = {english}, - keywords = {Circular economy,Consumer acceptance,Consumer preference,Products made from recycled materials,Purchase intentions,Scoping review}, - file = {/Users/fabio/Zotero/storage/KUDQS353/Polyportis et al_2022_Consumer acceptance of products made from recycled materials.pdf;/Users/fabio/Zotero/storage/BII7YR59/S092134492200369X.html} -} - -@article{pomponiEnvironmentalBenefitsMaterialefficient2022, - title = {Environmental Benefits of Material-Efficient Design: {{A}} Hybrid Life Cycle Assessment of a Plastic Milk Bottle}, - author = {Pomponi, Francesco and Li, Mengyu and Saint, Ruth and Lenzen, Manfred and D'Amico, Bernardino}, - year = {2022}, - month = mar, - journal = {Sustainable Production and Consumption}, - volume = {30}, - pages = {1044--1052}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.01.028}, - urldate = {2022-02-09} -} - -@article{Ponche2012, - title = {A New Global Approach to Design for Additive Manufacturing}, - author = {Ponche, R and Hascoet, J.Y and Kerbrat, O and Mognol, P}, - year = {2012}, - month = jun, - journal = {Virtual and Physical Prototyping}, - volume = {7}, - number = {2}, - pages = {93--105}, - issn = {1745-2759}, - doi = {10.1080/17452759.2012.679499}, - urldate = {2013-11-17}, - file = {/Users/fabio/Zotero/storage/NV3MAPAP/A new global approach to design for additive manufacturing.pdf} -} - -@article{ponzoaTechnologicallyEmpoweredPerception2021, - title = {Technologically Empowered? Perception and Acceptance of {{AR}} Glasses and {{3D}} Printers in New Generations of Consumers.}, - author = {Ponzoa, Jos{\'e} M. and G{\'o}mez, Andr{\'e}s and Villaverde, Silvia and D{\'i}az, Vicente}, - year = {2021}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {173}, - pages = {121166}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121166}, - urldate = {2021-09-15} -} - -@article{poolEcoprofilesCurrentNearfuture2006, - title = {The Eco-Profiles for Current and near-Future {{NatureWorks}} \textregistered{} Polylactide ({{PLA}}) Production}, - author = {Pool, Mid-continent Area Power}, - year = {2006}, - pages = {58--81}, - keywords = {assessment,eco-profile,life cycle,life cycle analysis,natureworks,pla,polylactic acid,polylactide,renewable,wind energy}, - file = {/Users/fabio/Zotero/storage/NGSAIYPX/Pool - 2006 - The eco-profiles for current and near-future NatureWorks ® polylactide (PLA) production.pdf} -} - -@article{Popescu2018, - ids = {Popescu2018a}, - title = {{{FDM}} Process Parameters Influence over the Mechanical Properties of Polymer Specimens: {{A}} Review}, - author = {Popescu, Diana and Zapciu, Aurelian and Amza, Catalin and Baciu, Florin and Marinescu, Rodica}, - year = {2018}, - journal = {Polymer Testing}, - volume = {69}, - pages = {157--166}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2018.05.020}, - urldate = {2021-01-15}, - abstract = {Designing and manufacturing functional parts for fields such as engineering and medicine is a major goal of Fused Deposition Modeling (FDM). These activities should be supported by knowledge on how different settings of process parameters impact the mechanical behavior of the products. However, obtaining this information is a quite complex task given the large variety of possible combinations of materials-3D printers-slicing software-process parameters. Thus, the importance of reviewing the current research on this topic for identifying practical and useful aspects, key process parameters and limitations, but also for understanding to what extent the results of these researches are relevant and can be applied in further studies and real applications. A systematic literature search was performed based on classification according to the type of 3D printing polymer. The most significant process parameters considered as influencing FDM specimens' tensile, compression, flexural or impact strengths are discussed considering the results presented in the literature. A necessary distinction between the mechanical properties of material and testing specimens (as given by producers and by experiments) and the mechanical behavior of a FDM end-part is also made.}, - keywords = {3D printing,Fused deposition modeling,Mechanical properties,Process parameters,Tensile strength,Testing specimens}, - file = {/Users/fabio/Zotero/storage/CIFMG2ET/full-text.pdf} -} - -@article{portaAnthropocenePlasticAge2021, - title = {Anthropocene, the Plastic Age and Future Perspectives}, - author = {Porta, Raffaele}, - year = {2021}, - journal = {FEBS Open Bio}, - volume = {11}, - number = {4}, - pages = {948--953}, - issn = {2211-5463}, - doi = {10.1002/2211-5463.13122}, - urldate = {2022-09-01}, - abstract = {The issue of plastic waste is one of the main topics on the international societal and political agenda since ever-increasing growth in the quantity of plastic materials produced has gone beyond the ability to manage them effectively at their end-of-life. Mostly pushed by social campaigns, an ever-increasing number of initiatives have been taken by different institutions to reduce the huge amount of plastic waste: first of all, specific legal regulations have been introduced, both to realize effective systems of plastic collection, reuse and recycling, and to outlaw the use of unnecessary disposable one-use items. However, due to the indisputable advantages derived from the use of such a material, every action of decision makers to limit the production or use of plastics is unavoidably affected by economic evaluations, as well as by the deficiency or drawbacks of alternative materials, rather than by environmental reasons. In the three reviews in this Special `In the Limelight' section, Oliver Bajt, Paola Fabbri et al. and Frederic Debeaufort \textendash{} invited speakers at the Special Session on Science \& Society, entitled `Plastics: revolution, pollution and substitution', of the 45th FEBS Congress to be held in Ljubljana, Slovenia, on 3\textendash 8 July 2021 \textendash{} describe in detail the consequences of plastic pollution (Bajt, 2021, FEBS Open Bio 11, 954-966), the complex transition to bioplastics (Degli Esposti et al., 2021, FEBS Open Bio 11, 967-983) and the possibility to obtain these innovative biodegradable materials from food and marine waste (Debeaufort 2021, FEBS Open Bio 11, 984-998), respectively. This introductory commentary highlights that, in the frame of the bioeconomy paradigm, not only multidisciplinary but also inter- and transdisciplinary research with integrated and multifaceted approaches are needed to produce novel eco-friendly materials with features similar to those of traditional plastics, as well as with acceptable economic and environmental impact.}, - copyright = {\textcopyright{} 2021 The Authors. FEBS Open Bio published by John Wiley \& Sons Ltd on behalf of Federation of European Biochemical Societies.}, - langid = {english}, - keywords = {anthropocene,bioplastics,circular bioeconomy,plastic pollution,renewable feedstock}, - file = {/Users/fabio/Zotero/storage/CL5TMR65/Porta - 2021 - Anthropocene, the plastic age and future perspecti.pdf;/Users/fabio/Zotero/storage/IWPHGZI2/2211-5463.html} -} - -@article{poskittApplyingPedagogicalTheories2021, - title = {Applying Pedagogical Theories to Understand Learning in Participatory Scenario Planning}, - author = {Poskitt, Sam and Waylen, Kerry Ann and Ainslie, Andrew}, - year = {2021}, - month = apr, - journal = {Futures}, - volume = {128}, - pages = {102710}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102710}, - urldate = {2021-03-08} -} - -@article{potGovernanceChallengeImplementing2020, - title = {The Governance Challenge of Implementing Long-Term Sustainability Objectives with Present-Day Investment Decisions}, - author = {Pot, Wieke D.}, - year = {2020}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124475}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124475}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/584QKPW8/full-text.pdf} -} - -@article{Potschin-Young2018, - title = {Understanding the Role of Conceptual Frameworks: {{Reading}} the Ecosystem Service Cascade}, - author = {{Potschin-Young}, M. and {Haines-Young}, R. and G{\"o}rg, C. and Heink, U. and Jax, K. and Schleyer, C.}, - year = {2018}, - month = feb, - journal = {Ecosystem Services}, - volume = {29}, - pages = {428--440}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.05.015}, - urldate = {2021-06-22}, - abstract = {The aim of this paper is to identify the role of conceptual frameworks in operationalising and mainstreaming the idea of ecosystem services. It builds on some initial discussions from IPBES, which suggested that conceptual frameworks could be used to: 'simplify thinking', 'structure work', `clarify issues', and `provide a common reference point'. The analysis uses the cascade model as a focus and looks at the way it has been used in recent published material and across a set of case studies from the EU-funded OpenNESS Project as a device for conceptual framing. It found that there are examples in the literature that show the cascade model indeed being used as an `organising framework', a tool for `re-framing' perspectives, an `analytical template', and as an `application framework'. Although the published materials on the cascade are rich, these accounts lack insights into the process by which the different versions of the model were created, and so we turned to the set of OpenNESS case studies to examine how they read the cascade. We found that the cascade was able to provide a common reference for a diverse set of studies, and that it was sufficiently flexible for it to be developed and elaborated in ways that were meaningful for the different place-based studies. The case studies showed that generalised models like the cascade can have an important `awareness-raising' role. However, we found that using models of this kind it was more difficult for case studies to link their work to broader societal issues such as human well-being, sustainable ecosystem management, governance, and competitiveness, than to their own concerns. We therefore conclude that to be used effectively, conceptual models like the cascade may need to be supported by other materials that help users read it in different, outward looking ways. We also need to find mechanisms for capturing this experience so that it can be shared with others.}, - keywords = {Cascade model,Conceptual frameworks,Ecosystem services,Mainstreaming,Operationalisation}, - file = {/Users/fabio/Zotero/storage/6BU3YVTE/Potschin-Young et al. - 2018 - Understanding the role of conceptual frameworks Reading the ecosystem service cascade.pdf;/Users/fabio/Zotero/storage/TD2TY8BD/Understanding-the-role-of-conceptual-frameworks--Reading-t_2018_Ecosystem-Se.pdf} -} - -@article{Potting2017, - title = {Circular {{Economy}}: {{Measuring}} Innovation in the Product Chain}, - author = {Potting, Jos{\'e} and Hekkert, Marko and Worrell, Ernst and Hanemaaijer, Aldert}, - year = {2017}, - journal = {PBL Netherlands Environmental Assessment Agency}, - number = {2544}, - pages = {46}, - abstract = {At the request of the Dutch Ministry of Infrastructure and the Environment, PBL Netherlands Environmental Assessment Agency and Utrecht University have explored ways to measure progress of a transition towards a circular economy in product chains. This study focuses on identifying what needs to be measured, rather than how measuring should be carried out. We developed a conceptual framework about the role of innovation in circular economy transitions (CE transitions) in product chains, and applied it to a number of cases. The framework and case applications serve to determine what type of information is needed to measure the progress of CE transitions in product chains.}, - keywords = {circular economy}, - file = {/Users/fabio/Zotero/storage/5FZNV27M/Circular Economy Measuring Innovation in the Product Chain.pdf} -} - -@article{Potts2021, - title = {Social Welfare Gains from Innovation Commons: {{Theory}}, Evidence, and Policy Implications}, - author = {Potts, Jason and Torrance, Andrew W. and Harhoff, Dietmar and {von Hippel}, Eric}, - year = {2021}, - journal = {SSRN Electronic Journal}, - pages = {1--34}, - doi = {10.2139/ssrn.3915997}, - file = {/Users/fabio/Zotero/storage/2XHI2S4B/SSRN-id3915997.pdf} -} - -@article{Poulson1996, - title = {{{USERfit}}: {{A}} Practical Handbook on User-Centred Design for {{Assistive Technology}}}, - author = {Poulson, D and Ashby, M and Richardson, S}, - year = {1996}, - journal = {Optics express}, - volume = {19}, - number = {24}, - eprint = {22109477}, - eprinttype = {pubmed}, - pages = {24507--24515}, - issn = {1094-4087}, - abstract = {We report direct experimental observation of interesting pulse synchronization dynamics in a cavity-combined Er and Yb mode-locked fiber lasers by measuring the relative position between the two-color pulses in the shared fiber section. The influence of the 1.03 \${$\mu\$$}m pulse on the 1.56 \${$\mu\$$}m single pulse as well as bound soliton pairs can be clearly identified as an effective phase modulation through the XPM effect with the walk-off effect taken into account. For the 1.56 \${$\mu\$$}m single pulse under synchronization, the dependence of the relative position variation and the center wavelength shift on the cavity mismatch detuning is found analogous to the typical characteristics of FM mode-locked lasers with modulation frequency detuning. Moreover, depending on the cavity mismatch, the passively synchronized 1.56 \${$\mu\$$}m bound soliton pairs are found to exhibit two different dynamical behaviors, i.e., phase-locked (in-phase) as well as non-phase-locked. The physical origins for these two kinds of bound soliton pairs are investigated experimentally by disclosing their locations with respective to the copropagating 1.03 \${$\mu\$$}m pulse.}, - pmid = {22109477} -} - -@article{Pouriani2019, - title = {A Robust Bi-Level Optimization Modelling Approach for Municipal Solid Waste Management; a Real Case Study of {{Iran}}}, - author = {Pouriani, Sepideh and {Asadi-Gangraj}, Ebrahim and Paydar, Mohammad Mahdi}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {240}, - pages = {118125}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118125} -} - -@misc{PovertyCentralBarrier, - title = {Poverty: {{A}} Central Barrier to the Implementation of the {{UN Sustainable Development Goals}} - {{ScienceDirect}}}, - urldate = {2021-09-15}, - howpublished = {https://www.sciencedirect.com/science/article/abs/pii/S1462901121002409?dgcid=rss\_sd\_all} -} - -@article{Powell1996, - title = {A {{Lifecycle Assessment}} and {{Economic Valuation}} of {{Recycling}}}, - author = {Powell, Jane C.}, - year = {1996}, - month = mar, - journal = {Journal of Environmental Planning and Management}, - volume = {39}, - number = {1}, - pages = {97--112}, - publisher = {{Routledge}}, - issn = {0964-0568}, - doi = {10.1080/09640569612697}, - urldate = {2014-06-25}, - abstract = {The financial costs of recycling schemes fail to account for external costs and benefits such as environmental pollution, road congestion and accidents. This paper compares the environmental and social impacts of a kerbside collection scheme for recyclable household waste, with a bring scheme, using lifecycle assessment. Economic valuation is used to assign relative weights to these impacts. A second comparison examines the relative external costs of recycling and landfill disposal of waste. The results show that the kerbside collection scheme has a lower external cost than the bring scheme, but this is of less importance than the benefits to be gained within the manufacturing system by using secondary materials. It is concluded that the combination of lifecycle assessment and economic valuation is an effective means of evaluation to direct the sustainable development of waste management. The financial costs of recycling schemes fail to account for external costs and benefits such as environmental pollution, road congestion and accidents. This paper compares the environmental and social impacts of a kerbside collection scheme for recyclable household waste, with a bring scheme, using lifecycle assessment. Economic valuation is used to assign relative weights to these impacts. A second comparison examines the relative external costs of recycling and landfill disposal of waste. The results show that the kerbside collection scheme has a lower external cost than the bring scheme, but this is of less importance than the benefits to be gained within the manufacturing system by using secondary materials. It is concluded that the combination of lifecycle assessment and economic valuation is an effective means of evaluation to direct the sustainable development of waste management.} -} - -@article{Powell2012, - title = {Democratizing Production through Open Source Knowledge: From Open Software to Open Hardware}, - author = {Powell, Alison}, - year = {2012}, - month = sep, - journal = {Media, Culture \& Society}, - volume = {34}, - number = {6}, - pages = {691--708}, - issn = {0163-4437}, - doi = {10.1177/0163443712449497}, - abstract = {The commercial success of open source software, along with a broader socio-cultural shift towards participation in media and cultural production, have inspired attempts to extend and expand open source practices. These include expansions from software into general culture through 'Free Culture' movements and, more recently, expansions from software into hardware and design. This article provides a critical perspective on the democratic potential of these broader 'open' contribution structures by examining how open source contributions to both software and hardware increase the opportunities for democratic participation in production, governance and knowledge exchange. By analysing attempts to 'open source' the sharing of hardware designs, it also notes the limitations of this democratization. The insights developed in the article nuance the relationship between open source cultures and commercial and market structures, identifying how the generative opportunities created by certain aspects of open source contribution structures increase the potential for democratizing production of communication tools, but also how incongruities across different open-source cultures and communities of practice limit the democratic potential of these processes. \textcopyright{} The Author(s) 2012.}, - isbn = {0163443712449}, - keywords = {democratic media production,design,knowledge exchange,monopolies of knowledge,open source cultures,political economy}, - file = {/Users/fabio/Zotero/storage/I97ZQBFN/Democratizing production through open source knowledge- from open software to open hardware.pdf} -} - -@article{Pozo2019, - title = {Temporal Sustainability Efficiency Analysis of Urban Areas via {{Data Envelopment Analysis}} and the Hypervolume Indicator: {{Application}} to {{London}} Boroughs}, - author = {Pozo, C. and Limleamthong, P. and Guo, Y. and Green, T. and Shah, N. and Acha, S. and Sawas, A. and Wu, C. and Siegert, M. and {Guill{\'e}n-Gos{\'a}lbez}, G.}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {117839}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117839} -} - -@article{PozoArcos2021, - title = {Faults in Consumer Products Are Difficult to Diagnose, and Design Is to Blame: {{A}} User Observation Study}, - author = {Pozo Arcos, Beatriz and Dangal, Sagar and Bakker, Conny and Faludi, Jeremy and Balkenende, Ruud}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {319}, - pages = {128741}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128741}, - urldate = {2021-09-15}, - abstract = {The process of fault diagnosis is an essential first step when repairing a product: it determines the condition of the parts and identifies the origin of failure. We report on how product users go through the process of fault diagnosis in consumer products and the influence of design features on this process. Two groups of 12 participants were asked to determine the fault in a defective product we supplied; the groups differed in their self-reported repair expertise. Four types of products were used for the study: a vacuum cleaner, kitchen blender, radio CD player, and coffee maker. During the experiment, the participants were asked to think aloud to explain their actions and understandings. Afterwards, they were interviewed regarding their experience. The results from the verbal and video analysis provided input for an updated framework of the diagnosis process, describing user actions at each diagnosis stage. Furthermore, we show that the way a product is designed and constructed (the positioning, accessibility, and visibility of relevant product components) has a significant influence on the success of the fault diagnosis. An important factor is user experience: product use facilitates signal recognition, while repair expertise facilitates disassembly. However, user experience is still less influential than the product's design. Based on these findings, we propose a set of design guidelines to facilitate the process of fault diagnosis in consumer products.}, - file = {/Users/fabio/Zotero/storage/JVLDAC6P/full-text.pdf} -} - -@article{pozoukidou15MinuteCityDecomposing2021, - title = {15-{{Minute City}}: {{Decomposing}} the {{New Urban Planning Eutopia}}}, - shorttitle = {15-{{Minute City}}}, - author = {Pozoukidou, Georgia and Chatziyiannaki, Zoi}, - year = {2021}, - month = jan, - journal = {Sustainability}, - volume = {13}, - number = {2}, - pages = {928}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2071-1050}, - doi = {10.3390/su13020928}, - urldate = {2022-10-17}, - abstract = {As cities are struggling to cope with the second wave of the global COVID-19 pandemic, the idea of 15-min cities seem to have sparked planners' imagination and politicians' willingness for providing us with a new urban planning eutopia. This paper explores the ``15-min city'' concept as a structural and functional element for redesigning contemporary cities. Methodologically, a study of three case cities that have adopted this new model of city vision, is carried out. The analysis focus on understanding how the idea of 15-min cities fits the legacies of different cities as described by traditional planning principles in the context of three evaluation pillars: inclusion, safety and health. The paper argues that the 15-min city approach is not a radical new idea since it utilizes long established planning principles. Nevertheless, it uses these principles to achieve the bottom-up promotion of wellbeing while it proposes an alternative way to think about optimal resource allocation in a citywide scale. Hence, application of 15-min city implies a shift in the emphasis of planning from the accessibility of neighborhood to urban functions to the proximity of urban functions within neighborhoods, along with large systemic changes in resource allocation patterns and governance schemes citywide.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {15-min cities,bottom-up wellbeing,COVID-19 pandemic,inclusive planning,land use planning,proximity,spatial planning}, - file = {/Users/fabio/Zotero/storage/EUTN728Y/Pozoukidou_Chatziyiannaki_2021_15-Minute City.pdf;/Users/fabio/Zotero/storage/L4VTXVIG/928.html} -} - -@misc{PPP, - title = {Perpetual Plastics Project}, - author = {{PPP}}, - year = {2020}, - howpublished = {http://www.perpetualplasticproject.com/} -} - -@article{prabhuTeachingDesigningAdditive2021, - title = {Teaching {{Designing}} for {{Additive Manufacturing}}: {{Formulating Educational Interventions That Encourage Design Creativity}}}, - author = {Prabhu, Rohan and Simpson, Timothy W. and Miller, Scarlett R. and Cutler, Stephanie L. and Meisel, Nicholas A.}, - year = {2021}, - month = oct, - journal = {https://home.liebertpub.com/3dp}, - publisher = {{Mary Ann Liebert, Inc., publishers 140 Huguenot Street, 3rd Floor New Rochelle, NY 10801 USA}}, - doi = {10.1089/3DP.2021.0087}, - urldate = {2021-10-28}, - abstract = {As additive manufacturing (AM) processes become more ubiquitous in engineering, design, and manufacturing, the need for a workforce skilled in designing for additive manufacturing (DfAM) has grown....}, - keywords = {assessment,creativity,design education,designing for additive manufacturing} -} - -@article{Prajapati2021, - title = {Improved Print Quality in Fused Filament Fabrication through Localized Dispensing of Hot Air around the Deposited Filament}, - author = {Prajapati, Hardikkumar and Salvi, Swapnil S. and Ravoori, Darshan and Qasaimeh, Momen and Adnan, Ashfaq and Jain, Ankur}, - year = {2021}, - month = apr, - journal = {Additive Manufacturing}, - volume = {40}, - pages = {101917}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.101917}, - abstract = {Bonding between polymer filaments deposited during Fused Filament Fabrication (FFF) is a critical process that determines the quality of the printed part. This process is governed by the temperature history of the deposited filament. In general, the longer the filament stays above glass transition temperature, the greater is the quality of bonding. This paper presents a technique to enhance FFF quality by localized dispensing of hot air from nozzles integrated with the main polymer-dispensing nozzle, thereby providing a hot micro-environment around the filament. The temperature field during this process is measured using infrared thermography. It is shown that under the correct process conditions, this approach results in significantly reduced heat transfer from the filament, thereby increasing the cool down time and improving the quality of bonding with the adjacent filaments. The improved thermal history of the filament due to hot air dispensing is shown to translate into increased neck size, leading to 35\% increase in thermal conductivity, 19\% increase in tensile strength and 145\% increase in tensile toughness. Compared to other thermal techniques for improving the FFF process proposed in the past, the present approach provides a highly localized, in situ thermal enhancement of the local environment around the deposited filament, and integrates seamlessly with the filament-dispensing nozzle. It is expected that the technique described here may help improve the quality of FFF process and enable the printing of parts with improved thermal and mechanical properties.}, - keywords = {Additive manufacturing,Filament adhesion,Infrared thermography,Polymer extrusion,Temperature measurement}, - file = {/Users/fabio/Zotero/storage/FUHXNKFX/DOc.pdf} -} - -@article{Prendeville2017, - title = {Circular {{Makerspaces}}: The Founder's View}, - author = {Prendeville, Sharon and Hartung, Grit and Brass, Clare and Purvis, Erica and Hall, Ashley}, - year = {2017}, - month = sep, - journal = {International Journal of Sustainable Engineering}, - volume = {10}, - number = {4-5}, - pages = {272--288}, - publisher = {{Taylor and Francis Ltd.}}, - issn = {1939-7038}, - doi = {10.1080/19397038.2017.1317876}, - urldate = {2020-11-18}, - abstract = {Insititute of Design Innovation, loughborough university london, london, uK; b SustainrCa, royal College of art, london, uK; c technical nature, reading, uK ABSTRACT Makerspaces-open access design and fabrication workshops-provide new contexts for design practice through 'distributed production'. The global community of makerspaces has evolved quickly and in turn, substantial hype is attributed to its potential for radical sustainable innovation. In this article, we explore this potential in the context of the new 'circular economy' agenda. We focus the research on the critical role of makerspace managers/founders who are recognised as gatekeepers to circular practices. The research method is action-led including expert interviews (academics and founders/managers) as well as two generative context-mapping workshops, run at selected makerspaces in collaboration with their founders/ managers. We unearth everyday 'how-to' guidance to interweave circular practices within makerspaces from the outset by: fostering an enabling culture; building local connections; nurturing individual/ community capacities; and stimulating practical know-how. However, while the research reveals immense opportunities to cultivate circular literacy from within makerspaces, the prospects to ask more profound questions about our economy, through makerspace practices, are found to be compromised by day-today concerns. The insights from this research can act as a starting point for future work in this emerging research area.}, - keywords = {circular economy,design,distributed production,makers,Makerspaces,sustainability}, - file = {/Users/fabio/Zotero/storage/GKFARQV8/Prendeville et al. - 2017 - International Journal of Sustainable Engineering Circular Makerspaces the founder's view.pdf} -} - -@article{pretnerAreConsumersWilling2021, - title = {Are Consumers Willing to Pay for Circular Products? {{The}} Role of Recycled and Second-Hand Attributes, Messaging, and Third-Party Certification}, - author = {Pretner, Gaia and Darnall, Nicole and Testa, Francesco and Iraldo, Fabio}, - year = {2021}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {175}, - pages = {105888}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105888}, - urldate = {2021-09-15} -} - -@article{Priavolou2019, - title = {Assessing the Openness and Conviviality of Open Source Technology: {{The}} Case of the {{WikiHouse}}}, - author = {Priavolou, Christina and Niaros, Vasilis}, - year = {2019}, - month = aug, - journal = {Sustainability}, - volume = {11}, - number = {17}, - pages = {4746}, - publisher = {{MDPI AG}}, - issn = {2071-1050}, - doi = {10.3390/su11174746}, - abstract = {{$<$}p{$>$}The housing crisis has received growing interest from academia, industry, and policymakers. Open construction systems have emerged as a promising solution to achieve long-term social, economic, and environmental sustainability. In this paper, extensive fieldwork was conducted to investigate a case of an open construction system, namely, the WikiHouse Den Bosch. The research framework builds on a combined view of two main concepts: ``conviviality'' and ``openness''. The aim is to provide an in-depth understanding of the relationship between these two aspects and the literature regarding ``Design Global Manufacture Local''. The analysis showed that conviviality and openness are complex and context-specific factors. The paper concludes by outlining the need for an ``institutionalized conviviality'' to open up new pathways for future practice to address sustainability issues.{$<$}/p{$>$}}, - keywords = {Commons,Conviviality,Open hardware,Open innovation,Openness,WikiHouse} -} - -@article{priavolouTracingSustainableProduction2022, - ids = {priavolou2022a}, - title = {Tracing Sustainable Production from a Degrowth and Localisation Perspective: {{A}} Case of {{3D}} Printers}, - shorttitle = {Tracing Sustainable Production from a Degrowth and Localisation Perspective}, - author = {Priavolou, Christina and Troullaki, Katerina and Tsiouris, Nikiforos and Giotitsas, Chris and Kostakis, Vasilis}, - year = {2022}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {376}, - pages = {134291}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.134291}, - urldate = {2022-10-05}, - abstract = {An emerging commons-oriented mode of production that combines globally accessible knowledge with distributed manufacturing has recently been presented as a better fit for sustainable degrowth and localisation, compared to incumbent practices. To tentatively test this potential we select the case of 3D printers. The production of 3D printers varies within a spectrum from proprietary and industrially produced to open-source and locally manufactured. We compare different 3D printers within this spectrum, adopting a values-based life cycle analysis tool that allows for a critical evaluation of the sustainability of 3D printers from a degrowth perspective. An emphasis on the prospects for sustainable localisation is given at each life cycle stage. We find significant advantages of open-source 3D printers in terms of education, experimentation and maintenance, and enhanced conviviality in case parts of their manufacturing is localised. Still, to a large extent their manufacturing process remains a highly centralised process, hindering additional benefits, and coherence with sustainable degrowth and localisation. We conclude with insights on how openness in terms of materials production and proper documentation of the manufacturing process, as well as a multi-level organisation for local production could lead to more sustainable practices.}, - langid = {english}, - keywords = {3D printers,Degrowth,Life cycle thinking,Localisation,Open source,Sustainable production}, - file = {/Users/fabio/Zotero/storage/E94Q8MRW/Priavolou et al_2022_Tracing sustainable production from a degrowth and localisation perspective.pdf;/Users/fabio/Zotero/storage/R54SCP7N/S095965262203863X.html} -} - -@article{Priedeman, - title = {{{CONTROL PARAMETERS AND MATERIAL SELECTION CRITERIA FOR RAPID PROTOTYPINGSYSTEMS James W}}. {{ComblWilliam R}}. {{Priedeman Stratasys}}, {{Inc}}.}, - author = {Priedeman, James W Comblwilliam R}, - pages = {86--93}, - file = {/Users/fabio/Zotero/storage/7NFGMZIK/CONTROL PARAMETERS AND MATERIAL SELECTION CRITERIA FOR RAPID PROTOTYPINGSYSTEMS James W. ComblWilliam R. Priedeman Stratasys, Inc.pdf} -} - -@article{Priess2018, - title = {New {{EU-scale}} Environmental Scenarios until 2050 \textendash{} {{Scenario}} Process and Initial Scenario Applications}, - author = {Priess, Joerg A. and Hauck, Jennifer and {Haines-Young}, Roy and Alkemade, Rob and Mandryk, Maryia and Veerkamp, Clara and Gyorgyi, Bela and Dunford, Rob and Berry, Pam and Harrison, Paula and Dick, Jan and Keune, Hans and Kok, Marcel and Kopperoinen, Leena and Lazarova, Tanya and Maes, Joachim and Pataki, Gy{\"o}rgy and Preda, Elena and Schleyer, Christian and G{\"o}rg, Christoph and Vadineanu, Angheluta and Zulian, Grazia}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {542--551}, - publisher = {{The Authors}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.08.006}, - abstract = {Understanding uncertainties and risks can be considered to be the main motivation behind environmental scenario studies to assess potential economic, environmental, social or technical developments and their expected consequences for society and environment. The scenario study presented in this paper was designed to contribute to the question of how natural capital and ecosystem services may evolve in Europe under different socio-environmental conditions. The study was conducted as part of OpenNESS, an on-going EU FP7 research project. We present the iterative participatory scenario process, the storylines and drivers, examples for regional applications, as well as initial feedback from stakeholders. In a participatory iterative approach four scenarios were developed for the period to 2050, involving regional and EU-level users and stakeholders. Subsequently, scenarios were successfully contextualised and applied in regional place-based studies under widely differing socio-environmental conditions. Regional teams used different approaches to adapt storylines and drivers to the regional contexts. In an internal evaluation process among regional stakeholders some participants expressed concerns about the scenario method. Suggestions are made how to overcome these limitations. However, most participants approved the scenario method, especially in terms of provoking discussions, and confirmed the usefulness and applicability of the approach.}, - keywords = {Ecosystem service provision,Evaluation,Future,Natural capital,Participatory,Policy,Stakeholder feedback}, - file = {/Users/fabio/Zotero/storage/MB3MQUHG/New-EU-scale-environmental-scenarios-until-2050---Scenario-p_2018_Ecosystem-.pdf} -} - -@article{Pringle2018, - title = {Wood {{Furniture Waste-Based Recycled}} 3-{{D Printing Filament}}}, - author = {Pringle, Adam M and Rudnicki, Mark and Pearce, Joshua}, - year = {2017}, - month = nov, - journal = {Forest Products Journal}, - volume = {68}, - number = {1}, - pages = {FPJ-D-17-00042}, - issn = {0015-7473}, - doi = {10.13073/FPJ-D-17-00042}, - file = {/Users/fabio/Zotero/storage/UZ9CA5XX/Wood Furniture Waste–Based Recycled 3-D Printing Filament.pdf} -} - -@article{ProgressOpenScience, - title = {Progress on {{Open Science}}: {{Towards}} a {{Shared Research Knowledge System Final Report}} of the {{Open Science Policy Platform}}}, - doi = {10.2777/00139}, - urldate = {2020-09-23}, - isbn = {9789276188827}, - file = {/Users/fabio/Zotero/storage/NNK737KJ/full-text.pdf} -} - -@article{prostRevitalizingAgriculturalSciences2021, - ids = {prost2021a}, - title = {Revitalizing Agricultural Sciences with Design Sciences}, - author = {Prost, Lor{\`e}ne}, - year = {2021}, - month = oct, - journal = {Agricultural Systems}, - volume = {193}, - pages = {103225}, - issn = {0308521X}, - doi = {10.1016/j.agsy.2021.103225}, - urldate = {2022-10-11}, - abstract = {In this perspective article, I explain why agricultural sciences are facing what I consider to be design issues, and why I strongly believe that agricultural sciences would benefit from more dialogue on these issues with design sciences. Using two examples concerning the design of Decision Support Systems (DSS) and of agricultural systems, I discuss the methodological and conceptual contribution that design sciences can make to agricultural sciences. I then elaborate on how design sciences are most needed to help us revitalise agricultural sciences so that they can more effectively support farmers and agricultural stakeholders on their road to sustainability \textendash{} a process which requires a radical, creative and innovative design effort.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/DFDRC2TG/Prost - 2021 - Revitalizing agricultural sciences with design sci.pdf} -} - -@article{provanModesNetworkGovernance2008, - title = {Modes of Network Governance: {{Structure}}, Management, and Effectiveness}, - author = {Provan, Keith G. and Kenis, Patrick}, - year = {2008}, - month = apr, - journal = {Journal of Public Administration Research and Theory}, - volume = {18}, - number = {2}, - pages = {229--252}, - issn = {10531858}, - doi = {10.1093/JOPART/MUM015}, - urldate = {2022-03-13}, - abstract = {This article examines the governance of organizational networks and the impact of governance on network effectiveness. Three basic models, or forms, of network governance are developed focusing on their distinct structural properties. Propositions are formulated examining conditions for the effectiveness of each form. The tensions inherent in each form are then discussed, followed by the role that management may play in addressing these tensions. Finally, the evolution of governance is explored.} -} - -@article{Pryshlakivsky2021, - title = {Life {{Cycle Assessment}} as a Decision-Making Tool: {{Practitioner}} and Managerial Considerations}, - author = {Pryshlakivsky, Jonathan and Searcy, Cory}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {309}, - pages = {127344}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127344}, - urldate = {2021-05-10}, - abstract = {Organizations have been interested in Life Cycle Assessment in order to better understand the trade-offs associated between different approaches to producing their products and services. Life Cycle Assessment is a method to facilitate decision-making options regarding the impacts of products or services for design optimization, eco-efficiency and strategic market positioning. However, there has been little research examining the efficacy, limitations or drawbacks of Life Cycle Assessment in the decision-making context. Equally, the use of managerial, organizational and cognitive materials to explain decision-making in the context of Life Cycle Assessment has never been undertaken. The scientific universalism of Life Cycle Assessment is undermined by organizational politics and strategic alliances, as well as personal bias and intuition. Instead of dealing with the known problems associated with uncertainty, recent trends in Life Cycle Assessment development are exacerbating the decision-making phase by introducing additional problems. Thus, emerging approaches to Life Cycle Assessment are introducing novelty regardless of the potential impacts on decision-makers. In turn, this will have further ramifications in terms of demonstrating the utility of new approaches.}, - keywords = {Decision-making,Life cycle assessment,Management theory,Organizational behaviour,Trade-offs} -} - -@article{Pu2019, - title = {Structural Features of Global Recycling Trade Networks and Dynamic Evolution Patterns}, - author = {Pu, Yue and Wu, Gang and Tang, Biyan and Xu, Lin and Wang, Bo}, - year = {2019}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {151}, - pages = {104445}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104445}, - file = {/Users/fabio/Zotero/storage/ASWS3W49/Structural features of global recycling trade networks and dynamic evolution patterns.pdf} -} - -@article{Puerta-Sierra2021, - title = {University-Industry Collective Actions Framework: Societal Challenges, Entrepreneurial Interactions and Outcomes}, - author = {{Puerta-Sierra}, Lizbeth and Montalvo, Carlos and Angeles, Adrianela}, - year = {2021}, - month = jan, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--12}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1875129}, - urldate = {2021-02-13}, - abstract = {University-industry collaboration is increasing its significance due to the active role that society demand from universities. An entrepreneurial university requires understanding the different rationalities and asymmetries of university, researchers and industry in order to best encourage inter-organisational willingness to collaborate as well as to know the impact of their collaboration beyond the boundaries of their partnership. This paper presents an exploratory and conceptual framework providing propositions to gain a better understanding concerning the factors driving and hindering interactions and the willingness to collaborate between university-industry actors. In addition, this research discusses the relevance of the type of impact (economic, technological and societal) of this collaboration as agents of an eco-system accomplishing innovation goals. It concludes with theoretical, managerial and policy implications based on asymmetries on expectations, benefits, capabilities, norms and actors-agency. Such asymmetries affect the entrepreneurial predisposition to interact and strive to achieve societal desirable collaboration outcomes. A preliminary collective actions framework is proposed. Such framework renders a useful tool for universities, industry and government in the management of knowledge transfer and collaboration.}, - keywords = {entrepreneurial interactions,entrepreneurial university,innovation ecosystems,University-industry collaboration}, - file = {/Users/fabio/Zotero/storage/QRZ2GMPX/full-text.pdf} -} - -@article{puntLifeSceneWe2020, - title = {Life Is a Scene and We Are the Actors: {{Assessing}} the Usefulness of Planning Support Theatres for Smart City Planning}, - author = {Punt, E. P. and Geertman, S. C.M. and Afrooz, A. E. and Witte, P. A. and Pettit, C. J.}, - year = {2020}, - month = jul, - journal = {Computers, Environment and Urban Systems}, - volume = {82}, - publisher = {{Elsevier Ltd}}, - issn = {01989715}, - doi = {10.1016/j.compenvurbsys.2020.101485}, - abstract = {There are numerous studies on the identification and explanation of the implementation gap of planning support systems (PSS), that support the smart planning process by analyzing and visualizing data, but which are currently not systematically used in urban planning practice. There is insufficient knowledge about how the PSS implementation gap can be bridged and how PSS can be embedded into the planning process. This study provides insight into how the City Analytics Lab (CAL) can contribute to the promise of smart planning. It aims to first determine how CAL can yield the promise of smart planning. Then it provides insight into how CAL can contribute to close the PSS implementation gap. Accordingly, we organized fifteen workshops and surveyed planning practitioners (N = 89) at CAL to assess its usefulness for smart planning as well as its contribution in bridging the PSS implementation gap. The results show that users are positive towards the usefulness and usability of the support tools in the CAL, in particular the collaborative nature of the lab through its interactive tables and software applications. With regards to the PSS implementation gap, we find that there is a continued and increasingly successful conversation between the CAL and it's PSS tools and planning practice (i.e. `technology-to-people') by collaborating with local governments, industry partners and other universities. However, further refinement of the lab through continued conversation between users and developers (i.e. `people-to-people') is necessary, where tools are codesigned and user preferences and participation protocols are further considered. More broadly this research suggests that Planning Support Theatres, such as CAL can assist in reducing the technology adoption barriers commonly experienced in the application of PSS in practice. Such Planning Support Theatres, also provide a space to support new ideas and interactions importantly between both the key actors and the technology and the actors themselves.}, - keywords = {City analytics lab,Dashboards,Planning support system,Planning support theater,PSS implementation gap,Smart planning}, - file = {/Users/fabio/Zotero/storage/GJ2GXEWI/Life is a scene and we are the actors- Assessing the usefulness of planning support theatres for smart city planning.pdf} -} - -@article{pursellRiseFallAppropriate1993, - title = {The {{Rise}} and {{Fall}} of the {{Appropriate Technology Movement}} in the {{United States}}, 1965-1985}, - author = {Pursell, Carroll}, - year = {1993}, - journal = {Technology and Culture}, - volume = {34}, - number = {3}, - eprint = {3106707}, - eprinttype = {jstor}, - pages = {629--637}, - publisher = {{[The Johns Hopkins University Press, Society for the History of Technology]}}, - issn = {0040-165X}, - doi = {10.2307/3106707}, - urldate = {2022-10-14}, - file = {/Users/fabio/Zotero/storage/YYT2NXFF/Pursell_1993_The Rise and Fall of the Appropriate Technology Movement in the United States,.pdf} -} - -@article{Putnik2013, - title = {Scalability in Manufacturing Systems Design and Operation: {{State-of-the-art}} and Future Developments Roadmap}, - author = {Putnik, G. and Sluga, A. and Elmaraghy, H. and Teti, R. and Koren, Y. and Tolio, T. and Hon, B.}, - year = {2013}, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {62}, - number = {2}, - pages = {751--774}, - publisher = {{CIRP}}, - issn = {00078506}, - doi = {10.1016/j.cirp.2013.05.002}, - abstract = {The paper covers the main design, management and operational aspects of scalability in manufacturing systems (MS). It promotes scalability as an area of research of MS theory and practice in order to enhance techniques and methodologies in existing MS paradigms using advanced and emerging design and management approaches and ICT, and meet challenges of emerging MS paradigms and support their promotion and effective and efficient deployment in practice. The paper presents an introduction to scalability, state-of-the art in manufacturing and computer science, and related applications including manufacturing and education and a roadmap for future research and developments. ?? 2013 CIRP.}, - isbn = {0007-8506}, - keywords = {Flexibility,Manufacturing system,Scalability}, - file = {/Users/fabio/Zotero/storage/5F4EJCKJ/Scalability in manufacturing systems design and operation State-of-the-art and future developments roadmap.pdf} -} - -@article{Putrik2016, - title = {Construction of {{Objects}} for {{Rapid Prototyping Manufacturing}} in {{Dentistry}}}, - author = {Putrik, M. B. and Lavrentyeva, Yu E. and Antsygin, I. N.}, - year = {2016}, - journal = {Biomedical Engineering}, - volume = {50}, - number = {2}, - pages = {134--137}, - issn = {15738256}, - doi = {10.1007/s10527-016-9604-4}, - abstract = {\textcopyright{} 2016 Springer Science+Business Media New YorkThe application of rapid prototyping in medicine, in dentistry particularly, is described. The sequence of stages of initial data processing (set of digital images) for subsequent automated construction and 3D printing of objects is given. Examples of tooth impressions and surgical templates produced with different initial data parameters are described.}, - file = {/Users/fabio/Zotero/storage/VAK7LVEX/Construction of Objects for Rapid Prototyping Manufacturing in Dentistry.pdf} -} - -@techreport{puttick2014innovation, - title = {Innovation Teams and Labs: {{A}} Practice Guide}, - author = {Puttick, Ruth}, - year = {2014}, - institution = {{NESTA}}, - abstract = {This guide was written by Ruth Puttick and produced by Nesta's Innovation Skills team. The guide draws on Nesta's practical experience in creating teams to support innovation, our research on social innovation and labs, and our collaboration with many units, teams and labs around the world. It includes information from the i-teams report \textendash{} produced in collaboration with Bloomberg Philanthropies, and written by Ruth Puttick, Peter Baeck and Philip Colligan \textendash{} and The Radical's Dilemma: an overview of the practice and prospects of social and public labs, written by Geoff Mulgan.}, - mendeley-tags = {Innovation Teams}, - keywords = {Innovation Teams} -} - -@book{puttick2014teams, - title = {I-{{Teams}}: {{The}} Teams and Funds Making Innovation Happen in Governments around the World}, - author = {Puttick, Ruth and Baeck, Peter and Colligan, Philip}, - year = {2014}, - publisher = {{Nesta}}, - isbn = {978-1-84875-153-8}, - mendeley-tags = {Innovation Teams}, - keywords = {Innovation Teams} -} - -@misc{qactus, - title = {Quactus}, - author = {{Qactus}}, - year = {2020}, - howpublished = {https://qactus.cl} -} - -@article{Qian2019, - title = {A Cloud Service Platform Integrating Additive and Subtractive Manufacturing with High Resource Efficiency}, - author = {Qian, Cheng and Zhang, Yingfeng and Liu, Yang and Wang, Zhe}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {241}, - pages = {118379}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118379} -} - -@article{qiNestedPropertyRight2021, - title = {A {{Nested Property Right System}} of the {{Commons}}: {{Perspective}} of {{Resource System-Units}}}, - author = {Qi, Yingjun and Li, Wenjun}, - year = {2021}, - month = jan, - journal = {Environmental Science \& Policy}, - volume = {115}, - pages = {1--7}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2020.10.009}, - urldate = {2020-10-27}, - file = {/Users/fabio/Zotero/storage/7CLT72B4/full-text.pdf} -} - -@article{qinResearchApplicationMachine2022, - title = {Research and Application of Machine Learning for Additive Manufacturing}, - author = {Qin, Jian and Hu, Fu and Liu, Ying and Witherell, Paul and Wang, Charlie C.L. and Rosen, David W. and Simpson, Timothy W. and Lu, Yan and Tang, Qian}, - year = {2022}, - month = apr, - journal = {Additive Manufacturing}, - volume = {52}, - pages = {102691}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102691}, - urldate = {2022-03-13}, - abstract = {Additive manufacturing (AM) is poised to bring a revolution due to its unique production paradigm. It offers the prospect of mass customization, flexible production, on-demand and decentralized manufacturing. However, a number of challenges stem from not only the complexity of manufacturing systems but the demand for increasingly complex and high-quality products, in terms of design principles, standardization and quality control. These challenges build up barriers to the widespread adoption of AM in the industry and the in-depth research of AM in academia. To tackle the challenges, machine learning (ML) technologies rise to play a critical role as they are able to provide effective ways to quality control, process optimization, modelling of complex systems, and energy management. Hence, this paper employs a systematic literature review method as it is a defined and methodical way of identifying, assessing, and analysing published literature. Then, a keyword co-occurrence and cluster analysis are employed for analysing relevant literature. Several aspects of AM, including Design for AM (DfAM), material analytics, in situ monitoring and defect detection, property prediction and sustainability, have been clustered and summarized to present state-of-the-art research in the scope of ML for AM. Finally, the challenges and opportunities of ML for AM are uncovered and discussed.} -} - -@article{qinReviewBiodegradablePlastics2021, - title = {A Review of Biodegradable Plastics to Biodegradable Microplastics: {{Another}} Ecological Threat to Soil Environments?}, - author = {Qin, Meng and Chen, Changya and Song, Biao and Shen, Maocai and Cao, Weicheng and Yang, Hailan and Zeng, Guangming and Gong, Jilai}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {312}, - pages = {127816}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127816}, - urldate = {2021-06-10} -} - -@article{qiRapidDeterminationMoisture2022, - title = {Rapid Determination of Moisture Content of Multi-Source Solid Waste Using {{ATR-FTIR}} and Multiple Machine Learning Methods}, - author = {Qi, Ya-Ping and He, Pin-Jing and Lan, Dong-Ying and Xian, Hao-Yang and L{\"u}, Fan and Zhang, Hua}, - year = {2022}, - month = nov, - journal = {Waste Management}, - volume = {153}, - pages = {20--30}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.08.014}, - urldate = {2022-09-01}, - abstract = {Rapid determination of moisture content plays an important role in guiding the recycling, treatment and disposal of solid waste, as the moisture content of solid waste directly affects the leachate generation, microbial activities, pollutants leaching and energy consumption during thermal treatment. Traditional moisture content measurement methods are time-consuming, cumbersome and destructive to samples. Therefore, a rapid and nondestructive method for determining the moisture content of solid waste has become a key technology. In this work, an attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and multiple machine learning methods was developed to predict the moisture content of multi-source solid waste (textile, paper, leather and wood waste). A combined model was proposed for moisture content regression prediction, and the applicability of 20 combinations of five spectral preprocessing methods and four regression algorithms were discussed to further improve the modeling accuracy. Furthermore, the prediction result based on the water-band spectra was compared with the prediction result based on the full-band spectra. The result showed that the combination model can efficiently predict the moisture content of multi-source solid waste, and the R2 values of the validation and test datasets and the root mean square error for the moisture prediction reached 0.9604, 0.9660, and 3.80, respectively after the hyperparameter optimization. The excellent performance indicated that the proposed combined models can rapidly and accurately measure the moisture content of solid waste, which is significant for the existing waste characterization scheme, and for the further real-time monitoring and management of solid waste treatment and disposal process.}, - langid = {english}, - keywords = {Machine learning,Moisture content,Prediction,Regression algorithms,Solid waste,Spectra preprocessing}, - file = {/Users/fabio/Zotero/storage/6F7ZTQYN/S0956053X22004226.html} -} - -@article{qisthimairizalElectronicWasteGeneration2021, - title = {Electronic {{Waste Generation}}, {{Economic Values}}, {{Distribution Map}}, and {{Possible Recycling System}} in {{Indonesia}}}, - author = {Qisthi MAIRIZAL, Aulia and Yoga SEMBADA, Agung and Ming TSE, Kwong and Akbar RHAMDHANI, Muhammad}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {293}, - pages = {126096}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126096}, - urldate = {2021-02-14} -} - -@article{qiuLifeCycleDesign2022, - title = {Life Cycle Design of Fully Bio-Based Poly(Lactic Acid) Composites with High Flame Retardancy, {{UV}} Resistance, and Degradation Capacity}, - author = {Qiu, Shuang and Sun, Jun and Li, Yuchun and Zhu, Tao and Li, Hongfei and Gu, Xiaoyu and Fei, Bin and Zhang, Sheng}, - year = {2022}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {360}, - pages = {132165}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.132165}, - urldate = {2022-05-29} -} - -@article{Quak2016a, - title = {From {{Freight Partnerships}} to {{City Logistics Living Labs}} \textendash{} {{Giving Meaning}} to the {{Elusive Concept}} of {{Living Labs}}}, - author = {Quak, Hans and Lindholm, Maria and Tavasszy, Lori and Browne, Michael}, - year = {2016}, - journal = {Transportation Research Procedia}, - volume = {12}, - number = {June 2015}, - pages = {461--473}, - publisher = {{Elsevier B.V.}}, - issn = {23521465}, - doi = {10.1016/j.trpro.2016.02.080}, - keywords = {2016 published by elsevier,2352-1465,31631792851,access article under the,b,cc by-nc-nd license,city logistics,corresponding author,e-mail address,freight partnerships,hans,living labs,nl,quak,shared situational awareness,tel,this is an open,tno,v} -} - -@article{quCanEmbeddingGlobal2020, - title = {Can Embedding in Global Value Chain Drive Green Growth in {{China}}'s Manufacturing Industry?}, - author = {Qu, Chenyao and Shao, Jun and Cheng, Zhonghua}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {268}, - pages = {121962}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121962}, - urldate = {2020-05-27} -} - -@article{quinlanIndustrialConsumerUses2017, - title = {Industrial and {{Consumer Uses}} of {{Additive Manufacturing}}: {{A Discussion}} of {{Capabilities}}, {{Trajectories}}, and {{Challenges}}}, - shorttitle = {Industrial and {{Consumer Uses}} of {{Additive Manufacturing}}}, - author = {Quinlan, Haden Edward and Hasan, Talha and Jaddou, John and Hart, A. John}, - year = {2017}, - journal = {Journal of Industrial Ecology}, - volume = {21}, - number = {S1}, - pages = {S15-S20}, - issn = {1530-9290}, - doi = {10.1111/jiec.12609}, - urldate = {2022-09-13}, - copyright = {\textcopyright{} 2017 by Yale University}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/86RX5355/Quinlan et al. - 2017 - Industrial and Consumer Uses of Additive Manufactu.pdf} -} - -@article{Quinones2017, - title = {How to Develop Usability Heuristics: {{A}} Systematic Literature Review}, - author = {Qui{\~n}ones, Daniela and Rusu, Cristian}, - year = {2017}, - journal = {Computer Standards \& Interfaces}, - volume = {53}, - number = {March}, - pages = {89--122}, - publisher = {{Elsevier}}, - issn = {09205489}, - doi = {10.1016/j.csi.2017.03.009}, - abstract = {Numerous sets of usability heuristics have been designed for specific domains, as traditional heuristics do not evaluate the specific features of particular applications. A substantial portion of the existing research focuses on designing new sets of heuristics, demonstrating the interest in heuristics that might identify specific usability problems for specific application domains. This article presents an exhaustive review of 73 studies related to usability heuristics for specific domains and methodologies; the objective is to identify the approach that is used to create usability heuristics and whether a formal and systematic process is involved. We conducted a systematic literature review of papers published between 2006 and 2016. The review was based on the guidelines proposed by Kitchenham (2007) [13] and shows that most studies use an informal process to develop usability heuristics. The creation of heuristics is mainly based on existing heuristics, literature reviews, usability problems, and guidelines. However, a few studies apply a methodology to define, validate and refine the set of heuristics proposed. Nevertheless, these methodologies should be formalized in order to help the process of creating usability heuristics.}, - keywords = {Heuristic evaluation,Methodology,Systematic literature review,Usability,Usability heuristics}, - file = {/Users/fabio/Zotero/storage/C74C6V3R/How to develop usability heuristics A systematic literature review.pdf} -} - -@article{Raasch2009, - title = {On the Open Design of Tangible Goods}, - author = {Raasch, Christina and Herstatt, Cornelius and Balka, Kerstin}, - year = {2009}, - month = sep, - journal = {R\&D Management}, - volume = {39}, - number = {4}, - pages = {382--393}, - issn = {00336807}, - doi = {10.1111/j.1467-9310.2009.00567.x}, - file = {/Users/fabio/Zotero/storage/XDNGJZE8/Raasch, Herstatt, Balka - 2009 - On the open design of tangible goods.pdf} -} - -@article{Raasch2015, - title = {Characterization of Polyurethane Shape Memory Polymer Processed by Material Extrusion Additive Manufacturing}, - author = {Raasch, Jonathan and Ivey, Marcus and Aldrich, Daniel and Nobes, David S. and Ayranci, Cagri}, - year = {2015}, - journal = {Additive Manufacturing}, - volume = {8}, - pages = {132--141}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2015.09.004}, - abstract = {Material extrusion additive manufacturing (MEAM), also known as three-dimensional (3D) printing, is a popular additive manufacturing technique suitable for producing 3D shapes using thermoplastic materials. The majority of companies that design and test 3D printing machines work with thermoplastic acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) filaments. It is, however, crucial to utilize different types of filaments for a broader range of applications with different mechanical property requirements. Shape memory polymers (SMPs) are smart materials that react to an applied stimulus in order to recover large strains. MEAM techniques may be used for the production of SMP-based parts, allowing for smart structures to be created in a wide variety of geometries. In this work, a commercial 3D-printer was used to produce 3D printed polyurethane-based SMP specimens. An annealing heat treatment was applied to some of the specimens. Mechanical and thermomechanical testing was conducted to study the effects of testing temperatures and annealing heat treatments on the tensile and shape memory properties of the samples. 3D printing was shown to be a suitable technique for producing SMP parts capable of retaining good shape memory characteristics. Different annealing heat treatments and test temperatures were found to have considerable effects on the SMP specimen properties. In particular, annealing the specimens at 85. \textdegree C for 2. h helped to improve the rate of shape recovery and the consistency of mechanical test results.}, - keywords = {3D printing,Material extrusion additive manufacturing,Optical strain measurement,Polyurethane,Shape memory polymer}, - file = {/Users/fabio/Zotero/storage/FFN7YN99/Characterization of polyurethane shape memory polymer processed by material extrusion additive manufacturing (2015).pdf} -} - -@article{Rademacker2018, - title = {Sustainable {{Use}} of {{Carbon Fibers}} through {{CFRP Recycling}}}, - author = {Rademacker, Tim and Fette, Marc and J{\"u}ptner, G{\"u}nter}, - year = {2018}, - journal = {Lightweight Design worldwide}, - volume = {11}, - number = {5}, - pages = {12--19}, - doi = {10.1007/s41777-018-0041-9}, - file = {/Users/fabio/Zotero/storage/I4DXLM6A/Sustainable Use of Carbon Fibers through CFRP Recycling.pdf} -} - -@inproceedings{Radharamanan2011, - title = {Design and {{Development}} of a {{3D Printer}} with {{Recycling System}}}, - booktitle = {2011 {{ASEE Annual Conference}} \& {{Exposition}}}, - author = {Radharamanan, R}, - year = {2011}, - pages = {22.424.1 - 22.424.12}, - address = {{Vancouver}}, - file = {/Users/fabio/Zotero/storage/RK8Q6NPZ/Radharamanan - 2011 - AC 2011-2913 DESIGN AND DEVELOPMENT OF A 3D PRINTER WITH RECYCLING SYSTEM Design and Development of a 3D Printer.pdf} -} - -@article{Radosevic2019, - title = {Exploring Technology Upgrading of Emerging Economies: {{From}} `Shifting Wealth {{I}}' to `Shifting Wealth {{II}}'?}, - author = {Radosevic, Slavo and Meissner, Dirk and Lacasa, Iciar Dominguez and G{\"u}nther, Jutta}, - year = {2019}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {145}, - pages = {254--257}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.03.019}, - urldate = {2020-05-12} -} - -@article{rafewApplicationSystemDynamics2021, - title = {Application of System Dynamics Model for Municipal Solid Waste Management in {{Khulna}} City of {{Bangladesh}}}, - author = {Rafew, S.M. and Rafizul, Islam M.}, - year = {2021}, - month = jun, - journal = {Waste Management}, - volume = {129}, - pages = {1--19}, - publisher = {{Elsevier BV}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.04.059}, - urldate = {2021-06-08}, - abstract = {The long term municipal solid wastes (MSW) management plan of Khulna city has to be focused on the Bangladesh Delta Plan 2100. In most developing countries, conventional system of MSW management approach has been found inadequate due to complex nature of MSW. This study presents a system dynamics (SD) model to predict generation, collection, treatment and landfill capacity of MSW until the year of 2050 to analyze the necessity for MSW management for the coastal city of Khulna, Bangladesh. Simulation results show that MSW generation increases from 168 thousand tons in year 2020 to 1.2 million tons with a per capita generation from 0.117 tons to 0.561 tons by year 2050. The total fund required for collection and landfill capacity also increases, while treatment capacity decreases over time, resulting a piling up of massive amount of uncleared MSW of 10.3 million tons in year 2050 from 152 thousand tons in year 2020. The uncleared and untreated MSW, composite index and public concern increases with time in an exponential nature for the projection period of next thirty years. The population in this model is considered as the only linear growth factor which increases from 1.5 million in year 2020 to 2.24 million by year 2050. The developed SD model also shows that the policy of only to increase collection capacity with the increased allocation of budget is not adequate for improving environmental sustainability, rather an increase of budget is essential for developing MSW treatment facility. In this study, validation methods including behavior sensitivity, data sensitivity and dimensional consistency in extreme condition has been performed to validate the model. The outcome of this SD model can be used as a dynamic testing module for MSW management policy analysis and strategic measures that can be implemented effectively in the context of developing counties.}, - pmid = {34010802} -} - -@article{rafiqMicroplasticsWasteManagement2023, - title = {Microplastics in Waste Management Systems: {{A}} Review of Analytical Methods, Challenges and Prospects}, - shorttitle = {Microplastics in Waste Management Systems}, - author = {Rafiq, Adeel and Xu, Jun-Li}, - year = {2023}, - month = nov, - journal = {Waste Management}, - volume = {171}, - pages = {54--70}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.08.015}, - urldate = {2023-08-31}, - abstract = {Numerous studies have reported the presence of microplastics (MPs) in waste collection and disposal systems. However, current scientific studies on measuring MP occurrence in a waste management context are not comparable due to a lack of standardized methodologies. Consequently, the impact of MPs on ecosystems and human health remains largely unclear. To address the inconsistencies, present in published studies, this review thoroughly examines sample preparation techniques for transfer stations, landfill leachate, recycling, compost, and incineration ash samples. Furthermore, various analytical approaches such as flotation, filtration, and organic matter digestion, as well as morphological categorization, identification, and quantification, are subsequently rigorously assessed. The benefits and limitations of each methodology are evaluated to facilitate the development of accurate and effective methods for detecting and characterizing nanoplastics. Recent research suggests that plastic recycling and composting facilities are the primary environmental sources of microplastic pollution among different waste treatment methods. The most prevalent microplastic types discovered in waste management were polyethylene (PE) and polypropylene (PP), with fragment and fiber being the most frequently reported morphologies. The review highlights a number of tactics that could be integrated into the methodology development for detecting microplastics in waste management systems (WMS), ultimately leading to better consistency and reliability of data across different studies. In essence, this will advance our comprehension of potential risks associated with microplastics.}, - keywords = {Compost,Dual density separation,Incineration,Landfill,Microplastics,Nile red}, - file = {/Users/fabio/Zotero/storage/FX4SNYYU/S0956053X23005251.html} -} - -@article{ragabResearchMethodologyBusiness2017, - title = {Research {{Methodology}} in {{Business}}: {{A Starter}}'s {{Guide}}}, - shorttitle = {Research {{Methodology}} in {{Business}}}, - author = {Ragab, Mohamed AF and Arisha, Amr}, - year = {2017}, - month = dec, - journal = {Management and Organizational Studies}, - volume = {5}, - number = {1}, - pages = {1}, - issn = {2330-5509, 2330-5495}, - doi = {10.5430/mos.v5n1p1}, - urldate = {2023-01-18}, - abstract = {A cardinal requisite of successful research lies in the proper selection of the research methodology applied to achieve research objectives using the available resources. In addition to acquiring sufficient knowledge of their specific research topic, researchers are urged to develop good understanding of alternative research methodologies at their disposal to be able to identify the best-suited methods to address the research question. This, however, often poses a challenge for novice researchers who face difficulty in grasping the vast methodology landscape and its encompassing array of debates. The purpose of this paper is to provide new researchers with a comprehensive overview of the main elements of research methodology, particularly in the business domain. After a brief introduction, the paper introduces the principles of research philosophy, approaches, and methods, and explains the different paradigmatic stances adopted by researchers in the field. A number of mixed methods designs are then discussed to highlight the different means by which qualitative and quantitative research are combined. The final section presents sampling techniques then explores the most prominent data-collection tools employed in business, including interviews, questionnaires, and case studies. The paper aims to offer business postgraduate students embarking on their research journeys with a useful summary that would guide in them navigating the methodological aspect of their research work.}, - langid = {english}, - file = {/Users/fabio/Desktop/12708-44563-1-SM.pdf} -} - -@article{Ragaert2017, - title = {Mechanical and Chemical Recycling of Solid Plastic Waste}, - author = {Ragaert, Kim and Delva, Laurens and Van Geem, Kevin}, - year = {2017}, - month = nov, - journal = {Waste Management}, - volume = {69}, - pages = {24--58}, - publisher = {{Elsevier Ltd}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2017.07.044}, - abstract = {This review presents a comprehensive description of the current pathways for recycling of polymers, via both mechanical and chemical recycling. The principles of these recycling pathways are framed against current-day industrial reality, by discussing predominant industrial technologies, design strategies and recycling examples of specific waste streams. Starting with an overview on types of solid plastic waste (SPW) and their origins, the manuscript continues with a discussion on the different valorisation options for SPW. The section on mechanical recycling contains an overview of current sorting technologies, specific challenges for mechanical recycling such as thermo-mechanical or lifetime degradation and the immiscibility of polymer blends. It also includes some industrial examples such as polyethylene terephthalate (PET) recycling, and SPW from post-consumer packaging, end-of-life vehicles or electr(on)ic devices. A separate section is dedicated to the relationship between design and recycling, emphasizing the role of concepts such as Design from Recycling. The section on chemical recycling collects a state-of-the-art on techniques such as chemolysis, pyrolysis, fluid catalytic cracking, hydrogen techniques and gasification. Additionally, this review discusses the main challenges (and some potential remedies) to these recycling strategies and ground them in the relevant polymer science, thus providing an academic angle as well as an applied one.}, - isbn = {1083-351X (Electronic)\textbackslash r0021-9258 (Linking)}, - pmid = {22334691}, - keywords = {Chemical recycling,Mechanical recycling,Polymers,Solid plastic waste}, - file = {/Users/fabio/Zotero/storage/22Q9SVCU/Mechanical and chemical recycling of solid plastic waste.pdf} -} - -@article{Ragaert2020, - ids = {Ragaert2019,ragaert2020}, - title = {Design from Recycling: {{A}} Complex Mixed Plastic Waste Case Study}, - author = {Ragaert, Kim and Huysveld, Sophie and Vyncke, Gianni and Hubo, Sara and Veelaert, Lore and Dewulf, Jo and Du Bois, Els}, - year = {2020}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {155}, - pages = {104646}, - publisher = {{Elsevier B.V.}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104646}, - keywords = {Design from recycling,Mechanical recycling,Mixed plastic waste,Product development}, - file = {/Users/fabio/Zotero/storage/7MQT6GFJ/full-text.pdf} -} - -@article{raghuResourceCadastreCircular2023, - title = {Towards a `Resource Cadastre' for a Circular Economy \textendash{} {{Urban-scale}} Building Material Detection Using Street View Imagery and Computer Vision}, - author = {Raghu, Deepika and Bucher, Martin Juan Jos{\'e} and De Wolf, Catherine}, - year = {2023}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {198}, - pages = {107140}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107140}, - urldate = {2023-08-31}, - abstract = {The lack of data on existing buildings hinders efforts towards repair, reuse, and recycling of materials, which are crucial for mitigating the climate crisis. Manual acquisition of building data is complex and time-consuming, but combining street-level imagery with computer vision could significantly scale-up building materials documentation. We formulate the problem of building facade material detection as a multi-label classification task and present a method using GIS and street view imagery with just a few hundred annotated samples and a fine-tuned image classification model. Our method shows strong performance with macro-averaged F1 scores of 0.91 for Tokyo, 0.91 for NYC, 0.96 for Zurich, and 0.93 for the merged dataset. By utilizing open-access and non-proprietary data, our method can be scaled-up step by step to a global level. We make our in the wild dataset publicly available as the Urban Resource Cadastre Repository to encourage future work on automatic building material detection.}, - keywords = {Building cadastre,Computer vision,Material reuse,Multi-label classification,Street view images,Urban mining}, - file = {/Users/fabio/Zotero/storage/GWD8S773/S0921344923002768.html} -} - -@article{ragossnigWhatRightLevel2017, - title = {What Is the Right Level of Recycling of Plastic Waste?}, - author = {Ragossnig, Arne M and Schneider, Daniel R}, - year = {2017}, - month = feb, - journal = {Waste Management \& Research}, - volume = {35}, - number = {2}, - pages = {129--131}, - publisher = {{SAGE Publications Ltd STM}}, - issn = {0734-242X}, - doi = {10.1177/0734242X16687928}, - urldate = {2023-08-31}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/SVUVB2LZ/Ragossnig_Schneider_2017_What is the right level of recycling of plastic waste.pdf} -} - -@article{Raheem2019, - title = {Current Developments in Chemical Recycling of Post-Consumer Polyethylene Terephthalate Wastes for New Materials Production: {{A}} Review}, - author = {Raheem, Ademola Bolanle and Noor, Zainura Zainon and Hassan, Azman and Abd Hamid, Mohd Kamaruddin and Samsudin, Sani Amril and Sabeen, Ali Hussein}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {225}, - pages = {1052--1064}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.019} -} - -@article{Rahimi2014, - title = {Effect of Reprocessing on Shrinkage and Mechanical Properties of {{ABS}} and Investigating the Proper Blend of Virgin and Recycled {{ABS}} in Injection Molding}, - author = {Rahimi, Mohammad and Esfahanian, Mohsen and Moradi, Mehran}, - year = {2014}, - journal = {Journal of Materials Processing Technology}, - volume = {214}, - number = {11}, - pages = {2359--2365}, - publisher = {{Elsevier B.V.}}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2014.04.028}, - abstract = {In this research, the effect of reprocessing of acrylonitrile-butadiene- styrene (ABS) on the mechanical properties of the polymer was studied through a five-stage reprocessing. To this end, the injection mold of the standard samples was manufactured. Then, using an injection molding machine, all of the virgin material was processed. After sampling, the rest of the parts were ground and then reprocessed under the same conditions. In order to get a proper combinational ratio of virgin and recycled ABS with respect to shrinkage and mechanical properties, another experiment was designed. In order to do this, virgin material was blended with 20\%, 35\% and 50\% of the recycled material. The blends were reprocessed and samples were obtained. Impact, tensile, flexural and shrinkage tests, selected from ASTM standard, were used to investigate the mechanical properties of the polymer as well as its shrinkage. Furthermore, viscosity test was used to investigate the changes in the structure of the polymer. As the reprocessing cycles increased, shrinkage decreased and tensile and flexural ultimate strengths increased, more in flexural strength than in tensile. While Young's modulus slightly increased, viscosity decreased and consequently molecular weight decreased too. The proper blend for the least shrinkage was 50\% whereas the best mechanical properties were achievable by the 20\% blend. The obtained results suggest that reprocessing causes polymer degradation which is a result of the break in the bonds of poly butadiene. Moreover, it can be concluded that reprocessing in ABS can lead to the loss of effectiveness of some additives. \textcopyright{} 2014 Elsevier B.V.}, - keywords = {ABS,Blend,Injection molding,Mechanical properties,Recycling,Shrinkage}, - file = {/Users/fabio/Zotero/storage/AX4UQBKB/Rahimi, Esfahanian, Moradi - 2014 - Effect of reprocessing on shrinkage and mechanical properties of ABS and investigating the proper bl.pdf} -} - -@article{Rahimi2017, - title = {Chemical Recycling of Waste Plastics for New Materials Production}, - author = {Rahimi, Ali Reza and Garci{\'a}, Jeannette M.}, - year = {2017}, - journal = {Nature Reviews Chemistry}, - volume = {1}, - pages = {1--11}, - issn = {23973358}, - doi = {10.1038/s41570-017-0046}, - abstract = {Many methods exist for the recycling of plastic solid waste. Chemical recycling, which can take many forms from high-temperature pyrolysis to mild, solution-based catalytic depolymerization, can afford enormous economic and environmental benefits. This Review covers the state of the art in chemical recycling and the design of high-performance polymers amenable to such processes.}, - file = {/Users/fabio/Zotero/storage/BHQKK2V7/Chemical recycling of waste plastics for new materials production.pdf} -} - -@article{Rahimizadeh2019, - title = {Recycling of Fiberglass Wind Turbine Blades into Reinforced Filaments for Use in {{Additive Manufacturing}}}, - author = {Rahimizadeh, Amirmohammad and Kalman, Jordan and Fayazbakhsh, Kazem and Lessard, Larry}, - year = {2019}, - month = oct, - journal = {Composites Part B: Engineering}, - volume = {175}, - number = {July}, - pages = {107101}, - publisher = {{Elsevier Ltd}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2019.107101}, - abstract = {\textcopyright{} 2019 Elsevier Ltd The wind energy industry is one of the fastest-growing application sectors of composites, where reinforcement fibers are used in the manufacturing of light rotor blades. Considering the limited lifetime of turbine blades, a growing number of wind turbines will start to be decommissioned. Turbine blades are generally landfilled at their end-of-life, which highly impacts the environment. This paper proposes a systematic scheme combining mechanical recycling and 3D printing to recycle the valuable constituents of the scrap blades and reuse them in a Fused Filament Fabrication (FFF) process with the aim of improving the mechanical performance of 3D printed components. Mechanical grinding integrated with a double sieving mechanism is utilized to recover the reinforcement fibers. Tensile test specimens with 5 wt\% fiber content are fabricated from the recycled fibers and plastic pellets and their mechanical properties as well as internal microstructure are investigated. The results demonstrate an improvement of 16\% and 10\% in the elastic modulus and ultimate strength of the reinforced composite filament as compared to the commercially available pure PLA filament. As well, a Young's modulus of 3.35 GPa was observed for the FFF fabricated samples, which is an 8\% increase relative to pure PLA samples.}, - keywords = {A. Wind energy industry,B. Mechanical properties,E. Fused filament fabrication,E. Mechanical recycling}, - file = {/Users/fabio/Zotero/storage/FWM9E6HC/Recycling of fiberglass wind turbine blades into reinforced filaments for use in Additive Manufacturing.pdf} -} - -@article{Rahman2018, - title = {Additive {{Manufacturing}} with {{3D Printing}}: {{Progress}} from {{Bench}} to {{Bedside}}}, - author = {Rahman, Ziyaur and Barakh Ali, Sogra F. and Ozkan, Tanil and Charoo, Naseem A. and Reddy, Indra K. and Khan, Mansoor A.}, - year = {2018}, - month = nov, - journal = {The AAPS Journal}, - volume = {20}, - number = {6}, - pages = {101}, - issn = {1550-7416}, - doi = {10.1208/s12248-018-0225-6}, - file = {/Users/fabio/Zotero/storage/NP4JFRM9/Additive Manufacturing with 3D Printing Progress from Bench to Bedside.pdf} -} - -@article{rahmanOverviewNonbiodegradableBioplastics2021, - title = {An {{Overview}} of {{Non-biodegradable Bioplastics}}}, - author = {Rahman, Md Hafizur and Bhoi, Prakashbhai R.}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {294}, - pages = {126218}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126218}, - urldate = {2021-02-14} -} - -@incollection{Rahmati1998, - title = {Direct {{Rapid Tooling}}}, - booktitle = {Comprehensive {{Materials Processing}}}, - author = {Rahmati, S}, - year = {2014}, - volume = {10}, - pages = {303--344}, - publisher = {{Elsevier}}, - issn = {1355-2546}, - doi = {10.1016/B978-0-08-096532-1.01013-X}, - abstract = {In the product development process, companies require fast and inexpensive tooling to produce or evaluate components, enabling them to bring their products to market faster and more efficiently. Time to market directly influences the profitability of a new product. As timescales are reduced and risk levels rise, the demands on prototypes increase. Prototypes are needed faster, to be more accurate and more representative of the final component. Only the companies being first into the market can survive in this highly competitive marketplace. Business today requires everything faster. Additive manufacturing techniques are speeding up the availability of prototype parts. Additive manufacturing (AM) is an engineering tool to assist with changes and a means of improving communication and reducing risk. AM has the potential of creating short run and end-use tooling which can shorten the product development cycle significantly. The short lead time of AM tooling can significantly reduce cost and time to market. Hence, AM has enabled industry to benefit from different rapid tooling techniques such as investment casting, vacuum casting, metal spray tooling, and Keltool. Direct approaches to rapid tooling do not require the production of a pattern. Direct rapid tooling (DRT) involves no intermediate steps during the process of tool fabrication and potentially impact overall cost and part accuracy. \textcopyright{} 2014 Elsevier Ltd All rights reserved.}, - isbn = {978-0-08-096533-8}, - file = {/Users/fabio/Zotero/storage/Q8X2B9FW/Rahmati - 2014 - Direct Rapid Tooling.pdf} -} - -@article{Rahmati2021, - title = {A Novel Conservative Failure Model for the Fused Deposition Modeling of Polylactic Acid Specimens}, - author = {Rahmati, Arash and {Heidari-Rarani}, Mohammad and Lessard, Larry}, - year = {2021}, - month = dec, - journal = {Additive Manufacturing}, - volume = {48}, - pages = {102460}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102460}, - urldate = {2021-11-07}, - abstract = {Fused deposition modeling (FDM) is the most common technique used in the additive manufacturing process of polymers. However, there is a need for more accurate failure models for structures made by additive manufacturing, thus limiting the widespread application of this technique. This paper presents a novel conservative failure model to promote the efficient design of FDM products. The conservative model is tailored to provide underpredictions for the ultimate tensile strength (UTS) and presents a safety margin for designers. Two distinct failure modes have been widely reported for FDM parts-the layer separation mode and the layer breakage mode. Consequently, the model consists of a linear interpolation for the layer separation mode and a quadratic simplification for the layer breakage mode. Three data sets have been adopted from the literature to verify the model accuracy with minimized randomness error. The experiments were carried out for polylactic acid specimens with three layer thicknesses (i.e., 0.1 mm, 0.2 mm and 0.3 mm) and seven print orientation angles (i.e., 0 \textbullet{} , 15 \textbullet{} , 30 \textbullet{} , 45 \textbullet{} , 60 \textbullet{} , 75 \textbullet{} and 90 \textbullet ). The trends in the UTS and in-plane shear strength are analyzed and discussed with respect to different layer thicknesses. The results indicate that the failure model correctly underpredicts the UTS in 95.2\% of the cases. Furthermore, the accuracy of the model was investigated, and the errors were found to be insignificant. Nomenclature UTS Ultimate tensile strength. FDM Fused deposition modeling. LBM Layer breakage mode. LSM Layer separation mode. TA Transition angle. {$\sigma$} Normal stress. {$\tau$} Shear stress. S t Transverse shear strength. S l Longitudinal shear strength. T \texttheta{} Ultimate tensile strength at \texttheta. R Stress rotation matrix. ME Mean of experiments. UF \texttheta{} Underprediction factor at \texttheta.}, - keywords = {Conservative model,Failure model,Fused deposition modeling,Layer thickness,Orientation angle,Tensile strength}, - file = {/Users/fabio/Zotero/storage/EZQ98MPU/Rahmati, Heidari-Rarani, Lessard - 2021 - A novel conservative failure model for the fused deposition modeling of polylactic acid specim.pdf} -} - -@article{rainaOwnershipChallengeInternet2021, - title = {The Ownership Challenge in the {{Internet}} of Things World}, - author = {Raina, Ajay and Palaniswami, M.}, - year = {2021}, - month = may, - journal = {Technology in Society}, - volume = {65}, - pages = {101597}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2021.101597}, - urldate = {2021-04-29} -} - -@article{raisDynamicthermalLocalizedFilamentkinetic2021, - title = {Dynamic-Thermal and Localized Filament-Kinetic Attacks on Fused Filament Fabrication Based {{3D}} Printing Process}, - author = {Rais, Muhammad Haris and Li, Ye and Ahmed, Irfan}, - year = {2021}, - month = oct, - journal = {Additive Manufacturing}, - volume = {46}, - pages = {102200}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102200}, - urldate = {2021-08-24}, - abstract = {3D printing materializes physical objects through sequentially depositing thin layers. The layer-by-layer stacking involves controlling 3D printing parameters (e.g., fan speed, nozzle temperature, printing bed temperature, and filament extrusion rate) to ensure conformity to a CAD (Computer-aided Design) model. Attackers target the parameters during a printing process to sabotage the printing object. This paper presents four new sabotage attacks on the fused filament fabrication (FFF)-based 3D printing process: (1) cavity through filament-kinetics, (2) density variation through filament state, (3) density variation through filament speed, and (4) dynamic-thermal manipulation. These attacks produce an insignificant attack footprint on a finished printed object by targeting localized regions or using small changes in temperature profile, making them hard to detect. Specifically, the first three attacks manipulate filament-kinetics to change the print density or create a cavity in a small localized region, while the fourth attack makes slight changes to the nozzle temperature to manipulate thermal stress in a printing object without creating any visual deformation. Mechanical (tensile and three-point bending) tests carried out on the objects under attack demonstrate that these attacks with insignificant attack footprints can still change the physical properties (e.g., stress and strain) of the printed objects.} -} - -@article{rajeshkumarEnvironmentFriendlyRenewable2021, - title = {Environment Friendly, Renewable and Sustainable Poly Lactic Acid ({{PLA}}) Based Natural Fiber Reinforced Composites \textendash{} {{A}} Comprehensive Review}, - author = {Rajeshkumar, G. and Arvindh Seshadri, S. and Devnani, G.L. and Sanjay, M.R. and Siengchin, Suchart and Prakash Maran, J. and {Al-Dhabi}, Naif Abdullah and Karuppiah, Ponmurugan and Mariadhas, Valan Arasu and Sivarajasekar, N. and Ronaldo Anuf, A.}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {310}, - pages = {127483}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127483}, - urldate = {2021-06-08} -} - -@article{ralphConceptualMergingCircular2021, - ids = {ralph2021a}, - title = {A Conceptual Merging of Circular Economy, Degrowth and Conviviality Design Approaches Applied to Renewable Energy Technology}, - author = {Ralph, Natalie}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {319}, - pages = {128549}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128549}, - urldate = {2021-08-24}, - keywords = {Circular economy,Conviviality,Degrowth,Design,Renewable energy,Technology}, - file = {/Users/fabio/Zotero/storage/YH48I9J2/Ralph_2021_A conceptual merging of circular economy, degrowth and conviviality design.pdf;/Users/fabio/Zotero/storage/JSSYXGH6/S0959652621027578.html} -} - -@article{Ramakrishna2018, - title = {Materials Informatics}, - author = {Ramakrishna, Seeram and Zhang, Tong-Yi and Lu, Wen-Cong and Qian, Quan and Low, Jonathan Sze Choong and Yune, Jeremy Heiarii Ronald and Tan, Daren Zong Loong and Bressan, St{\'e}phane and Sanvito, Stefano and Kalidindi, Surya R.}, - year = {2019}, - month = aug, - journal = {Journal of Intelligent Manufacturing}, - volume = {30}, - number = {6}, - pages = {2307--2326}, - publisher = {{Springer US}}, - issn = {0956-5515}, - doi = {10.1007/s10845-018-1392-0}, - abstract = {\textcopyright{} 2018 Springer Science+Business Media, LLC, part of Springer Nature Materials informatics employs techniques, tools, and theories drawn from the emerging fields of data science, internet, computer science and engineering, and digital technologies to the materials science and engineering to accelerate materials, products and manufacturing innovations. Manufacturing is transforming into shorter design cycles, mass customization, on-demand production, and sustainable products. Additive manufacturing or 3D printing is a popular example of such a trend. However, the success of this manufacturing transformation is critically dependent on the availability of suitable materials and of data on invertible processing\textendash structure\textendash property\textendash performance life cycle linkages of materials. Experience suggests that the material development cycle, i.e. the time to develop and deploy new material, generally exceeds the product design and development cycle. Hence, there is a need to accelerate materials innovation in order to keep up with product and manufacturing innovations. This is a major challenge considering the hundreds of thousands of materials and processes, and the huge amount of data on microstructure, composition, properties, and functional, environmental, and economic performance of materials. Moreover, the data sharing culture among the materials community is sparse. Materials informatics is key to the necessary transformation in product design and manufacturing. Through the association of material and information sciences, the emerging field of materials informatics proposes to computationally mine and analyze large ensembles of experimental and modeling datasets efficiently and cost effectively and to deliver core materials knowledge in user-friendly ways to the designers of materials and products, and to the manufacturers. This paper reviews the various developments in materials informatics and how it facilitates materials innovation by way of specific examples.}, - isbn = {1084501813}, - keywords = {Materials 4.0,Materials data analytics,Materials data mining,Materials informatics,Materials modelling,Materials selection,Materials web platform}, - file = {/Users/fabio/Zotero/storage/S225TXTA/materials informatics.pdf} -} - -@article{Ramakrishnan2021, - title = {Innovation {{Centric Knowledge Commons}}\textemdash{{A Systematic Literature Review}} and {{Conceptual Model}}}, - author = {Ramakrishnan, Muralidharan and Shrestha, Anup and Soar, Jeffrey}, - year = {2021}, - month = jan, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {7}, - number = {1}, - pages = {35}, - publisher = {{MDPI AG}}, - issn = {2199-8531}, - doi = {10.3390/joitmc7010035}, - urldate = {2021-02-05}, - abstract = {{$<$}p{$>$}Commons theory is one of the influential economic theories that study the governance of shared resources, including knowledge. This paper provides a comprehensive view of the application of the concept of the commons towards supporting innovation in the Knowledge Management (KM) literature. A systematic literature review identified forty-four (44) relevant research papers discussed the commons published in twenty-three (23) high-impact KM journals. The research found that the application of commons in KM literature covers diverse areas, including Intellectual Property, Knowledge Cities, and Industrial Commons, that are related to innovation. The study found that extant literature does not adequately address innovation-centric knowledge. To address the gap, a conceptual model is presented to apply the Institutional Analysis and Development (IAD) framework to Open Innovation.{$<$}/p{$>$}}, - keywords = {Institutional analysis and development (IAD) frame,Knowledge commons,Open innovation,Systematic review}, - file = {/Users/fabio/Zotero/storage/WI5T8N3V/full-text.pdf} -} - -@article{Ramanath2008, - title = {Melt Flow Behaviour of Poly-Epsilon-Caprolactone in Fused Deposition Modelling.}, - author = {Ramanath, H S and Chua, C K and Leong, K F and Shah, K D}, - year = {2008}, - month = jul, - journal = {Journal of materials science. Materials in medicine}, - volume = {19}, - number = {7}, - eprint = {17619957}, - eprinttype = {pubmed}, - pages = {2541--50}, - issn = {1573-4838}, - doi = {10.1007/s10856-007-3203-6}, - urldate = {2014-06-03}, - abstract = {Fused deposition modelling (FDM) is an extrusion based Rapid prototyping (RP) technique which can be used to fabricate tissue engineering scaffolds. The present work focuses on the study of the melt flow behaviour (MFB) of Poly-epsilon-caprolactone (PCL) as a representative biomaterial, on the FDM. The MFB significantly affects the quality of the scaffold which depends not only on the pressure gradient, its velocity, and the temperature gradients but also physical properties like the melt temperature and rheology. The MFB is studied using two methods: mathematical modelling and finite element analysis (FEA) using Ansys(R). The MFB is studied using accurate channel geometry by varying filament velocity at the entry and by varying nozzle diameters and angles at the exit. The comparative results of both mathematical modelling and FEA suggest that the pressure drop and the velocities of the melt flow depend on the flow channel parameters. One inference of particular interest is the temperature gradient of the PCL melt, which shows that it liquefies within 35\% of the channel length. These results are invaluable to better understand the MFB of biomaterials that affects the quality of the scaffold built via FDM and can also be used to predict the MFB of other biomaterials.}, - pmid = {17619957}, - keywords = {Biocompatible Materials,Biocompatible Materials: chemistry,Chemical,Computer Simulation,Hardness,Hot Temperature,Materials Testing,Models,Polyesters,Polyesters: chemistry,Rheology,Rheology: methods,Viscosity}, - file = {/Users/fabio/Zotero/storage/LYWEN79Z/Melt flow behaviour of poly-epsilon-caprolactone in fused deposition modelling.pdf} -} - -@article{rameshStateArtReview2020, - title = {State of Art Review on {{Life Cycle Assessment}} of Polymers}, - author = {Ramesh, P and Vinodh, S}, - year = {2020}, - month = nov, - journal = {International Journal of Sustainable Engineering}, - volume = {13}, - number = {6}, - pages = {411--422}, - publisher = {{Taylor \& Francis}}, - issn = {1939-7038}, - doi = {10.1080/19397038.2020.1802623}, - urldate = {2023-08-31}, - abstract = {Sustainable polymers are environmentally benign and better alternative for fossil-based petrochemical polymers. Sustainable polymers consume lesser energy, minimal environmental impact and are economically balanced. This article presents cumulative review of Life Cycle Assessment (LCA) of fossil and biopolymers. LCA is performed for different polymers with different scenarios and categories: Cradle to Gate and Cradle to Grave. Environmental impact of different polymers is analysed and compared for different scenarios with different strategies (Cradle to Gate and Cradle to Grave). Product and process-based polymers are considered for review and Articles from various journals and publisher are considered for review. Based on the review, it was found that Global Warming (GW), Acidification Potential (AP) and Eutrophication Potential (EP) were focused impacts in many studies based on environmental viewpoint. SimaPro software and Ecoinvent database were widely used in studies to find environmental impact. Most of the articles were focused on Cradle to Gate boundary system, and among End of Life (EoL) scenarios, recycling, landfill, incineration and composting and energy recovery were mostly addressed.Abbreviations PLA: Poly Lactic Acid; TPS: Thermo Plastic Starch; PHA: Polyhydroxyalkanoates; PBS: Polybutylene succinate; ABS: Acrylonitrile Butadiene Styrene; HIPS: High Impact Polystyrene; HDPE: High Density Polyethylene; LDPE: Low Density Polyethylene; PE: Polyethylene; EG: Ethylene Glycol; PP: Poly Propylene; PS: Polystyrene; PET: Polyethylene Terephthalate; PL: Polyester; GPPS: General Purpose Polystyrene; Ozone Depletion: OD; CO2 emission; COE; Greenhouse Gas: GHG; Climate Change: CC; Global Warming: GW; Acidification Potential: AP; Eutrophication Potential: EP; Carcinogenics: CAR; Non Carcinogenics: NCAR; Respiratory Effects / Respiratory Organics: RE / RO; Ecotoxicity: ET; Fossil Fuel Depletion: FFD; Metal Depletion: MD; Smog Formation: SF; Abiotic Depletion: AD; Natural Resources Depletion: NRP; Particulate Matter Formation: PMF; Radiation: R; Minerals Depletion: MSD; Urban Land use: ULU; Agricultural Land use / land occupation Potential/Urban Land Occupation/ Natural Land Transformation: ALU/ LOP/ULO/NLT; Water Depletion: WD; Fresh water Eutrophication: FWE; Fresh water/ Water Use: FW/WU; Human Health: HH; HH Cancer: HHC; HH Noncancer: HHNC; Carbon Footprint: CFP; Human Toxicity: HT; Energy: Marine Aquatic Ecotoxicity / Marine Ecotoxicity: MAET/ MET; Photo Chemical Oxidation: PCO; Terrestrial Ecotoxicity: TET; Terrestrial Acidification: TA: Terrestrial Eutrophication: TE; Non Renewable Energy Use: NREU; Ionizing Radiation: IR}, - keywords = {biopolymers,design for environment,end of life management,environmental impacts,Life Cycle Assessment,Sustainability,sustainable polymers}, - file = {/Users/fabio/Zotero/storage/GNBK72RT/Ramesh_Vinodh_2020_State of art review on Life Cycle Assessment of polymers.pdf} -} - -@article{Ramirez-Correa2020, - title = {Users Segmentation Based on the {{Technological Readiness Adoption Index}} in Emerging Countries: {{The}} Case of {{Chile}}}, - author = {{Ram{\'i}rez-Correa}, Patricio and Grand{\'o}n, Elizabeth E. and {Rond{\'a}n-Catalu{\~n}a}, F. Javier}, - year = {2020}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {155}, - pages = {120035}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120035}, - urldate = {2020-04-24}, - abstract = {We set two main objectives in this study. First, to validate the Technology Readiness Index 2.0, which originated in the USA and measures technology adoption, in a less technologically mature country, Chile. Second, to explore the perceptions of Chilean users of new technologies to classify and compare them with users from the USA. Data were collected in two Chilean regions through a face-to-face survey with a final sample size of 788 respondents. Latent class analysis was used as a segmentation tool. We obtained five groups of users: pioneers, hesitators, avoiders, explorers, and skeptics. The clusters found in this current study are to some extent similar to those obtained in the pioneering research conducted in the USA, although there are differences in their order of importance. These findings can help companies to adopt innovations to specific market segments. As a result, the rate of success of these innovations would improve.}, - keywords = {Chile,Latent class segmentation,Technology adoption,Technology readiness,Usa} -} - -@article{Ramirez2019, - title = {We {{Need}} to {{Talk}} ({{More Wisely}}) {{About Wisdom}}: {{A}} Set of Conversations about Wisdom, Science, and Futures}, - author = {Ramirez, Rafael and Ravetz, Jerry and Sharpe, Bill and Varley, Leila}, - year = {2019}, - journal = {Futures}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.02.002}, - file = {/Users/fabio/Zotero/storage/KHJ9YKEV/We Need to Talk (More Wisely) About Wisdom- A set of conversations about wisdom, science, and futures.pdf} -} - -@article{Ramisio2019, - title = {Sustainability {{Strategy}} in {{Higher Education Institutions}}: {{Lessons}} Learned from a Nine-Year Case Study}, - author = {Ram{\'i}sio, Paulo J. and Pinto, L{\'i}gia M.Costa and Gouveia, Nuno and Costa, H{\'e}lder and Arezes, Diogo}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {222}, - pages = {300--309}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.257}, - urldate = {2020-05-21}, - abstract = {Sustainable Development is recognized as one of the biggest societal challenges of the twenty-first century. Higher Education Institutions have the vision, the knowledge and the power to lead this transition, and to induce the changes towards this new paradigm. As a result, sustainability values need to be incorporated in Higher Education Institutions' mission and practice. Although some successful case studies have been reported, there is a lack of consolidated methodologies to support an integrated and holistic implementation of sustainability, as well as to identify the opportunities associated with this process. The present research contributes to this literature by presenting the implementation of the sustainability vision of University of Minho (between 2009 and 2017), in a holistic and inclusive perspective, demonstrating the engagement and alignment of the Academic Community and the Rectorate. Based on the findings it is possible to derive some important lessons for the implementation of Sustainability Strategies in Higher Education Institutions. A mixed Bottom-up and Top-Down approach is seen as a key element for the successful change of the organizational culture. The implementation of sustainability policies that address all mission areas and the continuous monitoring and communication is crucial to demonstrate the commitment to all stakeholders. In addition, the integration of collaborative networks and the institutionalization of sustainable policies contribute to consolidate and strengthen the commitment with sustainability. The considered methodology and findings can significantly contribute to enrich the existent literature on reporting HEI sustainability practices, and to promote Sustainability Strategies in Higher Education Institutions, and other organizations, provided that their intrinsic nature is accounted for.}, - keywords = {Higher education,Organizational strategy,Sustainability,Sustainable development|} -} - -@article{ramkumarDiffusionEcoinnovationInterfirm2022, - title = {Diffusion of Eco-Innovation through Inter-Firm Network Targeting: {{An}} Agent-Based Model}, - author = {Ramkumar, Shyaam and Mueller, Matthias and Pyka, Andreas and Squazzoni, Flaminio}, - year = {2022}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {335}, - pages = {130298}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.130298}, - urldate = {2022-01-25} -} - -@article{rammeltInclusiveNotAdjective2021, - title = {Inclusive Is Not an Adjective, It Transforms Development: {{A}} Post-Growth Interpretation of {{Inclusive Development}}}, - author = {Rammelt, Crelis F. and Gupta, Joyeeta}, - year = {2021}, - month = oct, - journal = {Environmental Science \& Policy}, - volume = {124}, - pages = {144--155}, - publisher = {{Elsevier BV}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.06.012}, - urldate = {2021-07-05}, - abstract = {The 2030 Sustainable Development Agenda rests on both economic growth and Inclusive Development (ID). However, since growth is entangled with socio-ecological exploitation and appropriation, it conflicts with ID where `inclusive' encompasses social, ecological and relational dimensions, and fundamentally redefines `development'. Using Toulmin's argumentative model, we show that: (a) inclusive green growth does not promote socio-ecological inclusion and ignores relational inclusion, as economic growth cannot be optimized towards those broader aims; (b) policies for inclusion through pro-poor `access' without `re-allocation' of resources are self-defeating, as inequitable allocation of wealth and of a limited environmental utilization space impoverishes the poor and transfers ecological risks to them; (c) `re-allocation' requires a post-growth agenda involving a downscaling of overconsumption and overaccumulation by the global Centers, and a redefinition of development by the Peripheries; and (d) such an agenda is obstructed by the unequal distribution of wealth and political power. The only way forward is when science and social movements converge to demand system change on the streets and in the courts.}, - file = {/Users/fabio/Zotero/storage/3GMWE7Z9/full-text.pdf} -} - -@incollection{Ramos-DeValle2013, - title = {Principles of {{Polymer Processing}}}, - booktitle = {Handbook of {{Polymer Synthesis}}, {{Characterization}}, and {{Processing}}}, - author = {{Ramos-De Valle}, Luis F.}, - year = {2013}, - month = feb, - pages = {451--461}, - publisher = {{John Wiley \& Sons, Inc.}}, - address = {{Hoboken, NJ, USA}}, - doi = {10.1002/9781118480793.ch23}, - isbn = {0-471-38770-3}, - file = {/Users/fabio/Zotero/storage/ZJWCHNIS/Principles of Polymer Processing.pdf} -} - -@article{Ramos2020, - title = {Rethinking Sustainability: {{Questioning}} Old Perspectives and Developing New Ones}, - author = {Ramos, Tom{\'a}s B. and Caeiro, Sandra and Disterheft, Antje and Mascarenhas, Andr{\'e} and Deutz, Pauline and Spangenberg, Joachim H. and Monta{\~n}o, Marcelo and Olayide, Olawale and Sohal, Amrik}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {258}, - pages = {120769}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120769}, - urldate = {2020-03-15}, - abstract = {The concept of sustainability is still progressing, being complex and contested, and is therefore under continuous discussion and research. This special volume comprises 29 articles exploring recent developments of sustainability concepts, approaches, strategies, policies, and practices, as well as their roles and applicability in different geographic, socio-cultural and economic contexts. The majority of the articles were presented at the 22nd conference of the International Sustainable Development Research Society (ISDRS), held in Lisbon, Portugal, in July 2016. The articles address six overarching themes: i) global perspectives on sustainability challenges, policies and models; ii) the next frontiers of sustainability for corporations, iii) integration of non-traditional aspects and new forms of knowledge in sustainability research, iv) planning for sustainable development and sustainable cities, v) (higher) education for sustainable development and vi) human resources and sustainability. A summary of each article is given in this editorial, showing the diversity of themes, from theoretical and practical perspectives, and the broad range of different methods and research formats. The research presented in the articles was carried out in more than 17 countries on five continents. Notwithstanding the many efforts around rethinking sustainability research and practices, there are still many challenges to face and further opportunities for research on the topic.}, - keywords = {Challenges,Geographic-socio-cultural-economic contexts,New frontiers,Sustainable development} -} - -@article{Rampasso2019, - title = {Analysis of the Perception of Engineering Students Regarding Sustainability}, - author = {Rampasso, I. S. and Anholon, R. and Silva, D. and Cooper Ordo{\~n}ez, R. E. and {Santa-Eulalia}, L. A. and Quelhas, O. L.G. and Leal Filho, W. and Granada Aguirre, L. F.}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {233}, - pages = {461--467}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.105}, - urldate = {2020-05-21}, - abstract = {This research aims to evaluate the engineering students' perception regarding sustainability. For this, a survey was developed based on sustainability parameters from a detailed analysis of the Global Reporting Initiative (GRI) and the Brazilian Institute of Corporate Governance (BICG). The parameters were initially divided into seven groups: Financial and Productivity Aspects (FPA); Concern With Employees (CWE); Support for Local Communities (SLC); Ethical and Corporate Governance Issues (ECI); Environmental Aspects (ENA); Sustainable Aspects in the Operations Network (SON); Customers, Development of New Products and Services (CPS). The survey was conducted with engineering undergraduate students from two Brazilian universities. The data were analyzed through structural equation modeling technique, namely the PLS-SEM algorithm. The collected 162 answers enabled the validation of the model tested, and showed that the students, in general, do not consider SLC and CWE when they are analyzing sustainability. Additionally, the most important construct was the CPS. This is an exploratory study and we believe that these findings may contribute to expand the debate about the sustainability insertion in engineering courses, helping educators in their didactic activities. There were not found similar studies in the literature, which highlight the originality of the research. The statistical validation of the results and the contribution to expand the debate regarding sustainability in engineering education justify the value of this study.}, - keywords = {Engineering education,PLS-SEM,SDG,Sustainability} -} - -@article{Ranga2013a, - title = {Triple {{Helix}} Systems: An Analytical Framework for Innovation Policy and Practice in the {{Knowledge Society}}}, - author = {Ranga, Marina and Etzkowitz, Henry}, - year = {2013}, - journal = {Industry and Higher Education}, - volume = {27}, - number = {4}, - pages = {237--262}, - issn = {09504222}, - doi = {10.5367/ihe.2013.0165}, - abstract = {This paper introduces the concept of Triple Helix systems as an analytical construct that synthesizes the key features of university-industry-government (Triple Helix) interactions into an 'innovation system' format, defined according to systems theory as a set of components, relationships and functions. Among the components of Triple Helix systems, a distinction is made between (a) R\&D and non-R\&D innovators; (b) 'single-sphere' and 'multi-sphere' (hybrid) institutions; and (c) individual and institutional innovators. The relationships between components are synthesized into five main types: technology transfer; collaboration and conflict moderation; collaborative leadership; substitution; and networking. The overall function of Triple Helix systems - knowledge and innovation generation, diffusion and use - is realized through a set of activities in the knowledge, innovation and consensus spaces. This perspective provides an explicit framework for the systemic interaction between Triple Helix actors that was previously lacking, and a more fine-grained view of the circulation of knowledge flows and resources within and among the spaces, helping to identify existing blockages or gaps. From a Triple Helix systems perspective, the articulation and the non-linear interactions between the spaces can generate new combinations of knowledge and resources that can advance innovation theory and practice, especially at the regional level. Reprinted by permission of IP Publishing Ltd}, - isbn = {6507252166}, - keywords = {consensus space,corresponding author,government interaction,industry,innovation,innovation space,is with the human,knowledge space,marina ranga,regional innovation policy,sciences and technology,systems,triple helix systems,university} -} - -@article{Rangarajan2004, - title = {Powder {{Processing}}, {{Rheology}}, and {{Mechanical Properties}} of {{Feedstock}} for {{Fused Deposition}} of {{Si3N4 Ceramics}}}, - author = {Rangarajan, Sriram and Qi, Gang and Venkataraman, Natesan and Safari, Ahmad and Danforth, Stephen C}, - year = {2004}, - month = dec, - journal = {Journal of the American Ceramic Society}, - volume = {83}, - number = {7}, - pages = {1663--1669}, - issn = {00027820}, - doi = {10.1111/j.1151-2916.2000.tb01446.x}, - urldate = {2015-02-27}, - file = {/Users/fabio/Zotero/storage/9JBQUSYW/Rangarajan et al. - 2004 - Powder Processing, Rheology, and Mechanical Properties of Feedstock for Fused Deposition of Si3N4 Ceramics.pdf} -} - -@article{rangarajanRoleMaterialsProcessing, - title = {The {{Role}} of {{Materials Processing Variables}} in the {{FDC Process}}}, - author = {Rangarajan, Sriram and Qi, Gang and Banyopadhyay, Amit and Dai, Cheng and Han, Joon W}, - pages = {431--440}, - file = {/Users/fabio/Zotero/storage/SNMUJ6LP/Rangarajan et al. - Unknown - The Role of Materials Processing Variables in the FDC Process.pdf} -} - -@article{Rani2019, - title = {Miniaturized {{Near-Infrared}} ({{MicroNIR}}) {{Spectrometer}} in {{Plastic Waste Sorting}}}, - author = {Rani, Monika and Marchesi, Claudio and Federici, Stefania and Rovelli, Gianluca and Alessandri, Ivano and Vassalini, Irene and Ducoli, Serena and Borgese, Laura and Zacco, Annalisa and Bilo, Fabjola and Bontempi, Elza and Depero, Laura E.}, - year = {2019}, - month = aug, - journal = {Materials}, - volume = {12}, - number = {17}, - pages = {2740}, - publisher = {{MDPI AG}}, - issn = {1996-1944}, - doi = {10.3390/ma12172740}, - urldate = {2020-03-15}, - abstract = {Valorisation of the urban plastic waste in high-quality recyclates is an imperative challenge in the new paradigm of the circular economy. In this scenario, a key role in the improvement of the recycling process is exerted by the optimization of waste sorting. In spite of the enormous developments achieved in the field of automated sorting systems, the quest for the reduction of cross-contamination of incompatible polymers as well as a rapid and punctual sorting of the unmatched polymers has not been sufficiently developed. In this paper, we demonstrate that a miniaturized handheld near-infrared (NIR) spectrometer can be used to successfully fingerprint and classify different plastic polymers. The investigated urban plastic waste comprised polyethylene (PE), polypropylene (PP), poly(vinyl chloride) (PVC), poly(ethylene terephthalate) (PET), and poly(styrene) (PS), collected directly in a recycling plastic waste plant, without any kind of sample washing or treatment. The application of unsupervised and supervised chemometric tools such as principal component analysis (PCA) and partial least squares-discriminant analysis (PLS-DA) on the NIR dataset resulted in a complete classification of the polymer classes. In addition, several kinds of PET (clear, blue, coloured, opaque, and boxes) were correctly classified as PET class, and PE samples with different branching degrees were properly separated.}, - keywords = {Chemometrics,Circular economy,Near-infrared (NIR) spectroscopy,Partial least squares-discriminant analysis (PLS-D,Principal component analysis (PCA),Urban plastic waste}, - file = {/Users/fabio/Zotero/storage/JQGHZ3BK/full-text.pdf} -} - -@article{Ranjbari2021, - title = {Two Decades of Research on Waste Management in the Circular Economy: {{Insights}} from Bibliometric, Text Mining, and Content Analyses}, - author = {Ranjbari, Meisam and Saidani, Michael and Esfandabadi, Zahra Shams and Peng, Wanxi and Lam, Su Shiung and Aghbashlo, Mortaza and Quatraro, Francesco and Tabatabaei, Meisam and Shams Esfandabadi, Zahra and Peng, Wanxi and Lam, Su Shiung and Aghbashlo, Mortaza and Quatraro, Francesco and Tabatabaei, Meisam}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {314}, - pages = {128009}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128009}, - urldate = {2021-06-27}, - abstract = {Achieving environmental sustainability and transition from a linear economy to a circular economy (CE) highly relies on effective waste management (WM) and how waste is treated as a potential future resource. This research aims to provide an inclusive map of the scientific background of WM in the CE context over the last two decades from 2001 to 2020 to identify its salient research themes and trends, main characteristics, evolution, and potentially valuable directions for future studies. To achieve that, the following research questions were addressed by applying a mixed-method approach including bibliometric, text mining, and content analyses: (i) how has the field of WM research evolved within the CE domain? (ii) what are the salient research themes and trends of WM in the CE? and (iii) what are the possible directions for future research on WM within the CE context? As a result, the synthesized bibliometric networks were constructed and analyzed for a total of 962 journal articles extracted from the Web of Science database to visualize the main body of literature. Consequently , the seven major research themes of WM in the CE context were identified as follows: (1) bio-based WM; (2) CE transition; (3) electronic waste; (4) municipal solid waste; (5) environmental impacts and lifecycle assessment; (6) plastic waste; and (7) construction and demolition WM. The provided inclusive research landscape of WM systems, and its prominent highlight patterns can serve as a base for a real-time guideline to lead further research areas and as a tool to support WM policy-makers and practitioners to support the CE transition (which aims to minimize the waste generation). Finally, the future research directions to better position WM research activities within the CE context as a waste minimization approach are provided.}, - keywords = {Bibliometric analysis,Circular economy,Content analysis,Environmental sustainability,Text mining,Waste management}, - file = {/Users/fabio/Zotero/storage/X62QXTQT/Ranjbari et al. - 2021 - Two decades of research on waste management in the circular economy Insights from bibliometric, text mining, an.pdf} -} - -@article{ranjbarSystematicApproachWaste2023, - title = {A Systematic Approach toward Waste Management: {{Problem-oriented Innovation System}} ({{PIS}})}, - shorttitle = {A Systematic Approach toward Waste Management}, - author = {Ranjbar, Alireza and Nasri, Shohreh and Fatemi, Mehdi and Ghazinoory, Sepehr}, - year = {2023}, - month = jun, - journal = {Technology Analysis \& Strategic Management}, - volume = {0}, - number = {0}, - pages = {1--17}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2023.2225654}, - urldate = {2023-07-03}, - abstract = {The production of waste and the concerns about their ecological and environmental damages are among the grand challenges societies have faced. Therefore, policymakers should highlight effective waste management as one of the pillars of sustainable development. However, the previous frameworks for managing the waste problem have been mainly unsystematic as they neglected the social aspects of the problem in analysing technology development and innovation. Therefore, in this article, the status-quo of Tehran's waste problem (as a case study) was analysed with the new approach of `Problem-oriented Innovation System (PIS),' and policy recommendations are presented accordingly. The research methodology is content analysis of related documents and reports based on a 5-step process. Findings indicate that the weak performance of Tehran's solid waste management originates at the beginning of the waste management cycle and the weak functions of public awareness, standardisation, market formation, and system monitoring guidance. Accordingly, the unstable patterns of industrial production and social behaviour lead to the supply of a large amount of unnecessary and uneconomical waste, and the system's actors are incapable of guiding the system and standardising to change the patterns.}, - keywords = {Environmental issues,Grand challenges,Mission-oriented Innovation Policy,Mission-oriented Innovation System,Problem-oriented Innovation System,Waste management} -} - -@article{rantaExploringInstitutionalDrivers2018, - title = {Exploring Institutional Drivers and Barriers of the Circular Economy: {{A}} Cross-Regional Comparison of {{China}}, the {{US}}, and {{Europe}}}, - author = {Ranta, Valtteri and {Aarikka-Stenroos}, Leena and Ritala, Paavo and M{\"a}kinen, Saku J.}, - year = {2018}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {135}, - pages = {70--82}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2017.08.017}, - urldate = {2022-03-13}, - abstract = {The Circular Economy (CE) has been identified as a sustainable alternative to the current linear economic model. Thus far, research on the circular economy has focused on methods for better conserving the value in material flows. As the CE is currently being adopted as a sustainable development strategy in, e.g., China and the EU, identifying and comparing the drivers of and barriers to CE implementation would be beneficial for the acceleration of the development path. To contribute toward this research area, we built on institutional theory via a multiple case study covering China, the US, and Europe. We analyzed each region as an institutional environment and considered manufacturer and integrator types of value chain actors due to their central role in CE implementation. As our key findings, we identified that the general drivers of the CE from each institutional environment support recycling as the primary CE action, while support for other CE types appears to be lacking. Regulatory measures have primarily driven increased recycling efforts on both the integrator and manufacturer sides. Similarly, identified normative indicators overwhelmingly point toward recycling, while increasing reuse faces cultural-cognitive barriers. Between regions, China differs due to its informal sector and strong regulative institutional support. We conclude that to improve institutional support for the CE and allow it to fulfill its potential as a sustainable growth model, diversified institutional support for reducing the products produced and materials used as well as increasing reuse are needed.}, - keywords = {Case study,Circular economy,Cultural-cognitive,Institutional theory,Norm,Regulation} -} - -@book{RapportEvaluationMondiale2019, - title = {Le Rapport de l'\'evaluation Mondiale de La}, - year = {2019}, - urldate = {2021-06-14}, - isbn = {978-3-947851-17-1}, - file = {/Users/fabio/Zotero/storage/NRZ64SY9/full-text.pdf} -} - -@article{Rasoolimanesh2019, - title = {How Governance Influences the Components of Sustainable Urban Development?}, - author = {Rasoolimanesh, S. Mostafa and Badarulzaman, Nurwati and Abdullah, Aldrin and Behrang, Mohsen}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117983}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117983} -} - -@article{Rau2019, - title = {A Decision Model for Competitive Remanufacturing Systems Considering Technology Licensing and Product Quality Strategies}, - author = {Rau, Hsin and Budiman, Syarif Daniel and Regencia, Reonella C. and Salas, Angela Denise P.}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118011}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118011} -} - -@article{raudsepp-hearneUntanglingEnvironmentalistParadox2010, - title = {Untangling the Environmentalist's Paradox: {{Why}} Is Human Well-Being Increasing as Ecosystem Services Degrade?}, - author = {{Raudsepp-Hearne}, Ciara and Peterson, Garry D. and Teng, Maria and Bennett, Elena M. and Holland, Tim and Benessaiah, Karina and MacDonald, Graham K. and Pfeifer, Laura}, - year = {2010}, - journal = {BioScience}, - volume = {60}, - number = {8}, - pages = {576--589}, - publisher = {{Oxford University Press}}, - issn = {00063568}, - doi = {10.1525/bio.2010.60.8.4}, - urldate = {2021-06-10}, - abstract = {Environmentalists have argued that ecological degradation will lead to declines in the well-being of people dependent on ecosystem services. The Millennium Ecosystem Assessment paradoxically found that human well-being has increased despite large global declines in most ecosystem services. We assess four explanations of these divergent trends: (1) We have measured well-being incorrectly; (2) well-being is dependent on food services, which are increasing, and not on other services that are declining; (3) technology has decoupled well-being from nature; (4) time lags may lead to future declines in well-being. Our findings discount the first hypothesis, but elements of the remaining three appear plausible. Although ecologists have convincingly documented ecological decline, science does not adequately understand the implications of this decline for human well-being. Untangling how human well-being has increased as ecosystem conditions decline is critical to guiding future management of ecosystem services; we propose four research areas to help achieve this goal. \textcopyright{} 2010 by American Institute of Biological Sciences.}, - keywords = {adaptation,ecosystem services,human well-being,sustainability,time lags}, - file = {/Users/fabio/Zotero/storage/QBH6SUGR/full-text.pdf} -} - -@article{Raugel2015, - title = {Recyclability {{Study}} on {{Inconel}} 718 and {{Ti-6Al-4V Powders}} for {{Use}} in {{Electron Beam Melting}}}, - author = {Nandwana, Peeyush and Peter, William H. and Dehoff, Ryan R. and Lowe, Larry E. and Kirka, Michael M. and Medina, Francisco and Babu, Sudarsanam S.}, - year = {2016}, - month = feb, - journal = {Metallurgical and Materials Transactions B}, - volume = {47}, - number = {1}, - pages = {754--762}, - issn = {1073-5615}, - doi = {10.1007/s11663-015-0477-9}, - file = {/Users/fabio/Zotero/storage/96UVGMNL/Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting.pdf} -} - -@article{rauRheologyRoadmapEvaluating2023, - title = {A Rheology Roadmap for Evaluating the Printability of Material Extrusion Inks}, - author = {Rau, Daniel A. and Bortner, Michael J. and Williams, Christopher B.}, - year = {2023}, - month = aug, - journal = {Additive Manufacturing}, - volume = {75}, - pages = {103745}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2023.103745}, - urldate = {2023-08-31}, - abstract = {Thanks to its ability to process highly viscous inks with a range of rheological properties, Chemical Reaction Bonding Material Extrusion (MEX-CRB) Additive Manufacturing (AM), commonly referred to as Direct Ink Write (DIW), has been used to process a wide variety of materials. However, there does not yet exist a methodology to guide the creation and screening of novel inks for this process. Leveraging a series of rheology experiments and rheology-to-printability relationships, a ``Rheology Roadmap'' is presented that guides material designers through systematic evaluation of an ink's compatibility for MEX, independent of the ink's specific attributes. In this work, printability is defined as an ink's ability to be processed via DIW, and is assessed by using measured rheology data to predict its behavior across the three critical sub-functions of the MEX process: extrusion, extrudate solidification, and layer support. The Roadmap synthesizes the broad range of reported rheology analyses in literature into a systematic decision framework that presents a repeatable order for conducting the rheology experiments and evaluating the associated criteria for relating each experiment's results to printability. Within this framework, an ink is either deemed printable following each rheology experiment, and the ink is further characterized in the next experiment, or the experiment reveals that the ink is not printable and the evaluation process is stopped. The Roadmap can characterize a range of inks, independent of their specific attributes, including yield-stress, time dependent solidification, and combined solidification inks for a range of MEX process embodiments. Quantifiable criteria based on rheological properties is provided to classify ink type. To demonstrate the practical application of the Roadmap, a silicone ink with both yield-stress and reactive curing behavior, and urethane acrylate inks with photocuring behavior, are screened for processing via MEX and then printed using a dual-component extruder. By following the Rheology Roadmap, users with minimal expertise in rheology, MEX, and/or materials formulation can assess new inks for printability in a standardized manner, thus assisting in the creation of the next generation of MEX materials.}, - keywords = {3D printing,Additive manufacturing,Direct ink write,Material extrusion,Rheology}, - file = {/Users/fabio/Zotero/storage/4MWXUV9S/S2214860423003585.html} -} - -@article{ravetzSciencePostnormalPerspectives2022, - title = {Science \textendash{} {{Post-normal}} Perspectives}, - author = {Ravetz, Jerry}, - year = {2022}, - month = jun, - journal = {Futures}, - volume = {140}, - pages = {102958}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2022.102958}, - urldate = {2022-05-29} -} - -@article{ravinaHardtorecyclePlasticsAutomotive2023, - title = {Hard-to-Recycle Plastics in the Automotive Sector: {{Economic}}, Environmental and Technical Analyses of Possible Actions.}, - shorttitle = {Hard-to-Recycle Plastics in the Automotive Sector}, - author = {Ravina, Marco and Bianco, Isabella and Ruffino, Barbara and Minardi, Marta and Panepinto, Deborah and Zanetti, Mariachiara}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - pages = {136227}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136227}, - urldate = {2023-02-12}, - abstract = {The use of plastics in the automotive industry is favoured by their relatively low cost, but a sustainable treatment at their end of life is still challenging. The objective of this study is to contribute to the identification of best practices to increase the recovery rate of plastic materials from end-of-life vehicles (ELVs). European regulations for ELVs foresee that the reuse/recovery and reuse/recycling had to be increased to a minimum of 95\% and 85\% of the vehicle weight respectively by 2015. Three areas with room for possible improvement were identified in this study: the dismantling phase, the recycling processes, and the material recovery from automotive shredder residues (ASRs) as solid recovered fuels (SRFs). The economic feasibility of recovering specific plastic components from ELVs was assessed using a criterion based on the cost of dismantling, recycling and disposal of the components, as well as the environmental costs of the processes. Based on the results, disassembly and recycling could be cost-effective for a disassembly time below 180\,s and a component mass above 600\,g. For the recycling processes, the Life Cycle Assessment (LCA) methodology was applied to evaluate the environmental impacts of recycling HDPE from fuel tanks, polyamides PA6/PA66 and PET from automotive components. As the climate change indicator is concerned, Tthe LCA study showed that the impact for 1\,kg of these secondary raw materials is respectively of 0.83, 0.16/0.17 and 2.17\,kg CO2 eq, obtained from these fractions resulting more sustainable than the respective virgin materials. Electricity consumption was among the main contributors to the potential environmental impacts. The characterization process of ASRs was conducted to assess their compliance to certain types of SRFs. According to the results of the industrial tests, the treatment facility can recover only around 74\% of an ELV. The characteristics of ASRs were compliant to be assimilated to a SRF. This study showed that the amount of plastics recoverable from ELVs has the potential to increase thus facilitating the fulfilment of EU recovery targets.}, - langid = {english}, - keywords = {Automotive shredder residues,End-of-life vehicles,LCA,Plastic recycling,Waste valorization}, - file = {/Users/fabio/Zotero/storage/QZ9KX4NX/Ravina et al_2023_Hard-to-recycle plastics in the automotive sector.pdf;/Users/fabio/Zotero/storage/QN9WCHCV/S0959652623003852.html} -} - -@article{Ravindran2019, - title = {Open {{Source Waste Plastic Granulator}}}, - author = {Ravindran, Arvind and Scsavnicki, Sean and Nelson, Walker and Gorecki, Peter and Franz, Jacob and Oberloier, Shane and Meyer, Theresa K. and Barnard, Andrew R. and Pearce, Joshua M.}, - year = {2019}, - month = oct, - journal = {Technologies}, - volume = {7}, - number = {4}, - pages = {74}, - issn = {2227-7080}, - doi = {10.3390/technologies7040074}, - abstract = {In order to accelerate deployment of distributed recycling by providing low-cost feed stocks of granulated post-consumer waste plastic, this study analyzes an open source waste plastic granulator system. It is designed, built, and tested for its ability to convert post-consumer waste, 3D printed products and waste into polymer feedstock for recyclebots of fused particle/granule printers. The technical specifications of the device are quantified in terms of power consumption (380 to 404 W for PET and PLA, respectively) and particle size distribution. The open source device can be fabricated for less than \$2000 USD in materials. The experimentally measured power use is only a minor contribution to the overall embodied energy of distributed recycling of waste plastic. The resultant plastic particle size distributions were found to be appropriate for use in both recyclebots and direct material extrusion 3D printers. Simple retrofits are shown to reduce sound levels during operation by 4dB-5dB for the vacuum. These results indicate that the open source waste plastic granulator is an appropriate technology for community, library, maker space, fab lab, or small business\textendash based distributed recycling.}, - isbn = {1906487146}, - keywords = {3d printing,additive manufacturing,circular economy,distributed manufacturing,distributed recycling,extruder,fab lab,granulator,open hardware,open-source,polymers,recycling,shredder,upcycle,waste plastic}, - file = {/Users/fabio/Zotero/storage/9LT9WQNN/Open source waste granulator.pdf} -} - -@book{Rawal2014, - title = {Advances in {{Filament Yarn Spinning}} of {{Textiles}} and {{Polymers}}}, - author = {Rawal, A. and Mukhopadhyay, S.}, - year = {2014}, - journal = {Advances in Filament Yarn Spinning of Textiles and Polymers}, - publisher = {{Elsevier}}, - doi = {10.1533/9780857099174.2.75}, - urldate = {2014-04-14}, - abstract = {Melt spinning is among the most widely used methods for producing polymeric filaments. A range of polymers, namely poly(ethylene terephthalate), polyurethanes, polyolefines and polyamides, are generally melt spun. This chapter discusses the fundamentals of melt spinning, modeling of polymeric flows inside the screw and the spinneret, interaction of melt-spun filaments with the environment, and the limitations of melt spinning. Some recent developments and future trends pertaining to melt spinning are also discussed.}, - isbn = {978-0-85709-499-5}, - file = {/Users/fabio/Zotero/storage/EVSIY9RC/Advances in Filament Yarn Spinning of Textiles and Polymers.pdf} -} - -@article{raworthDoughnutAnthropoceneHumanity2017, - title = {A {{Doughnut}} for the {{Anthropocene}}: Humanity's Compass in the 21st Century}, - author = {Raworth, Kate}, - year = {2017}, - month = may, - journal = {The Lancet Planetary Health}, - volume = {1}, - number = {2}, - pages = {e48-e49}, - publisher = {{Elsevier B.V.}}, - issn = {25425196}, - doi = {10.1016/S2542-5196(17)30028-1}, - urldate = {2020-10-27}, - pmid = {29851576}, - file = {/Users/fabio/Zotero/storage/C2AHBXBE/full-text.pdf} -} - -@article{raworthWhyItTime2017, - title = {Why It's Time for {{Doughnut Economics}}}, - author = {Raworth, Kate}, - year = {2017}, - month = dec, - journal = {IPPR Progressive Review}, - volume = {24}, - number = {3}, - pages = {216--222}, - publisher = {{John Wiley and Sons Inc.}}, - issn = {25732323}, - doi = {10.1111/newe.12058}, - urldate = {2020-10-27}, - abstract = {Economics needs a new mindset to be fit for tackling this century's social and ecological challenges. The Doughnut of social and planetary boundaries offers a compass for those seeking to achieve this.} -} - -@article{Rayna2015, - title = {Co-Creation and User Innovation: {{The}} Role of Online {{3D}} Printing Platforms}, - author = {Rayna, Thierry and Striukova, Ludmila and Darlington, John}, - year = {2015}, - journal = {Journal of Engineering and Technology Management}, - volume = {37}, - pages = {90--102}, - publisher = {{Elsevier B.V.}}, - issn = {09234748}, - doi = {10.1016/j.jengtecman.2015.07.002}, - abstract = {The aim of this article is to investigate the changes brought about by online 3D printing platforms in co-creation and user innovation. As doing so requires a thorough understanding of the level of user involvement in productive processes and a clear view of the nature of co-creative processes, this article provides a `prosumption' framework and a typology of co-creation activities. Then, based on case studies of 22 online 3D printing platforms, a service-based taxonomy of these platforms is constructed. The taxonomy and typology are then matched to investigate the role played by online 3D platforms in regard to the various types of co-creation activities and, consequently, how this impacts user innovation.}, - isbn = {0923-4748}, - file = {/Users/fabio/Zotero/storage/5GB9B2YU/Co-creation and user innovation The role of online 3D printing platforms.pdf} -} - -@article{Rayna2016, - title = {From Rapid Prototyping to Home Fabrication: {{How 3D}} Printing Is Changing Business Model Innovation}, - author = {Rayna, Thierry and Striukova, Ludmila}, - year = {2016}, - journal = {Technological Forecasting and Social Change}, - volume = {102}, - pages = {214--224}, - publisher = {{Elsevier B.V.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2015.07.023}, - abstract = {There is a growing consensus that 3D printing technologies will be one of the next major technological revolutions. While a lot of work has already been carried out as to what these technologies will bring in terms of product and process innovation, little has been done on their impact on business models and business model innovation. Yet, history has shown that technological revolution without adequate business model evolution is a pitfall for many businesses. In the case of 3D printing, the matter is further complicated by the fact that adoption of these technologies has occurred in four successive phases (rapid prototyping, rapid tooling, digital manufacturing, home fabrication) that correspond to a different level of involvement of 3D printing in the production process. This article investigates the effect of each phase on the key business model components. While the impact of rapid prototyping and rapid tooling is found to be limited in extent, direct manufacturing and, even more so, home fabrication have the potential to be highly disruptive. While much more value can be created, capturing value can become extremely challenging. Hence, finding a suitable business model is critical. To this respect, this article shows that 3D printing technologies have the potential to change the way business model innovation is carried out, by enabling adaptive business models and by bringing the 'rapid prototyping' paradigm to business model innovation itself.}, - isbn = {0040-1625}, - keywords = {3D printing,Business models,Direct Digital manufacturing,Home fabrication,Innovation,Rapid prototyping,Rapid tooling,Value capture,Value creation}, - file = {/Users/fabio/Zotero/storage/65LLK767/From rapid prototyping to home fabrication How 3D printing is changing business model innovation.pdf} -} - -@inproceedings{Rayna2019, - title = {Open Social Innovation Dynamics and Impact: Exploratory Study of a Fab Lab Network}, - booktitle = {R {{D}} Manag.}, - author = {Rayna, Thierry and Striukova, Ludmila}, - year = {2019}, - month = jun, - volume = {49}, - pages = {383--395}, - publisher = {{Blackwell Publishing Ltd}}, - issn = {14679310}, - doi = {10.1111/radm.12376}, - abstract = {The aim of this research is to explore the dynamics and impact of open social innovation, within the context of fab labs and makerspaces. Using an exploratory methodology based on 12 semi-structured interviews of fab lab founders belonging to The Centres for Maker Innovation and Technology (CMIT) programme \textendash{} a network of 170 fab labs located in Eastern Europe \textendash{} this research explores the impact of an adopting an open approach in relation to the different stages of social innovation (prompts, proposals, prototypes, sustaining, scaling and diffusion, systemic change) as well as social impact. The main results of this study are that while the CMIT programme provided each fab lab with similar initial conditions (identical funding, objectives and rules), the open social innovation approached adopted enabled to give birth to a wide diversity of fab labs, each being very well adapted to the local environment, social needs and constraints and able to deliver social impact in just a matter of years; a result that would be hard to achieve with a centralised top-down approach. The study identified three types of CMITs \textendash{} Education, Industry and Residential \textendash{} which could be similar or different depending on the stage of social open innovation. Furthermore, this paper discusses the main difficulties social entrepreneurs encounter as a part of the open social innovation process, as well as means to overcome them. In this respect, this study adds to the literature on fab labs by providing more comprehensive view of the challenges faced by fab labs (and makerspaces) founders, as well as suggestions of strategies enabling to ensure their long-term sustainability.}, - file = {/Users/fabio/Zotero/storage/SYXIBA47/Rayna_Striukova_2019_Open social innovation dynamics and impact.pdf} -} - -@article{Rayna2020, - title = {Fostering Skills for the 21st Century: {{The}} Role of {{Fab}} Labs and Makerspaces}, - author = {Rayna, Thierry and Striukova, Ludmila}, - year = {2020}, - month = oct, - journal = {Technological Forecasting and Social Change}, - pages = {120391}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120391}, - urldate = {2020-10-31}, - abstract = {Based on a study of a network of fab labs and makerspaces, this article investigates the role that such `fabrication spaces' can play in fostering 21st century skills. Using a combination of the two main 21st century skills frameworks\textemdash DigComp and EntreComp\textemdash developed by the EU Commission, we study by the means of two combined qualitative research methods\textemdash semi-structured interviews of 13 fab lab/makerspace founders, followed by a focus group with founders and policymaker\textemdash the entrepreneurial and digital skills that are fostered by these fab labs and makerspaces. Our findings are that while fab labs and makerspaces naturally foster some entrepreneurial 21st century skills, only explicit and proactive entrepreneurship and education programme enable to foster the whole spectrum of these skills. In regard to technical skills, fab labs and makerspaces enable to develop skills beyond what is generally considered as 21st century digital skills, because they combine digital skills with hands-on `making' skills, since they are themselves mixed environment, both digital and physical. Consequently, the growing importance of `maker technologies' may force to redefine what 21st century skills should be.}, - keywords = {21st Century Skills,3D printing,Entrepreneurship,Fab labs,Makerspaces,Technology education}, - file = {/Users/fabio/Zotero/storage/4BPR3C9D/full-text.pdf} -} - -@article{Rayna2020, - title = {Assessing the Effect of {{3D}} Printing Technologies on Entrepreneurship: {{An}} Exploratory Study}, - author = {Rayna, Thierry and Striukova, Ludmila}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - pages = {120483}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120483}, - urldate = {2020-12-21}, - file = {/Users/fabio/Zotero/storage/HZFD86FJ/full-text.pdf} -} - -@article{razaliWasteSeparationSource2020, - title = {Waste Separation at Source Behaviour among {{Malaysian}} Households: {{The Theory}} of {{Planned Behaviour}} with Moral Norm}, - author = {Razali, Fitriyah and Daud, Dzurllkanian and Wai, Choong Weng and Anthony Jiram, Wilson Rangga}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - pages = {122025}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122025}, - urldate = {2020-06-22} -} - -@article{razaRecentAdvancesProductivity2022, - title = {Recent Advances and Productivity Analysis of {{3D}} Printed Geopolymers}, - author = {Raza, Muhammad Huzaifa and Zhong, Ray Y. and Khan, Mahram}, - year = {2022}, - month = apr, - journal = {Additive Manufacturing}, - volume = {52}, - pages = {102685}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102685}, - urldate = {2022-03-07} -} - -@article{Razza2020, - title = {Metrics for Quantifying the Circularity of Bioplastics: {{The}} Case of Bio-Based and Biodegradable Mulch Films}, - author = {Razza, Francesco and Briani, Cristiana and Breton, Tony and Marazza, Diego}, - year = {2020}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {159}, - pages = {104753}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104753}, - urldate = {2020-05-11}, - abstract = {The concept of circularity and its quantification through the Material Circularity Indicator (MCI) is well established for traditional plastic products. In this paper a methodological approach for calculating the circularity of bio-based and biodegradable (BB) products is proposed and applied to BB mulch films. BB products are different from traditional products in as much as they are sourced and regenerated (recycled) not through technical cycles but the biological loop. The suggested method is an adaptation of the MCI where two major changes were made: (i) the mass of the bio-based component corresponds to the recycled material in input and (ii) the mass of the bio-based component leaving the system through composting or biodegradation in soil is accounted as recycled. The modified MCI supports the eco-design of innovative BB products and allows for the comparison of their circularity taking into account the biological source and the expected end of life process such as biodegradation. To demonstrate the adaptation, the method has been applied to BB mulch films. Results showed that the MCI of a biodegradable mulch film, characterized by an average bio-based feedstock content of 30\% is 0.37 {$\pm$} 0.04 in a 0\textendash 1 scale. For BB mulch film, the amount of bio-based feedstock is the most sensitive factor and controls linearly the value of the MCI.}, - keywords = {Bio-based product,Biodegradable mulch film,Biodegradation,Bioplastics,Circular economy,Circularity indicators} -} - -@misc{RCoreTeam2014, - title = {R: {{A Language}} and {{Environment}} for {{Statistical Computing}}}, - author = {{R Core Team}}, - year = {2014}, - publisher = {{R Foundation for Statistical Computing}}, - address = {{Vienna, Austria}} -} - -@misc{Re2014, - title = {{{RepRap Family Tree}} - {{RepRapWiki}}}, - author = {{RepRap.org}}, - year = {2014}, - urldate = {2014-01-27}, - howpublished = {http://reprap.org/wiki/RepRap\_Family\_Tree}, - file = {/Users/fabio/Zotero/storage/X45JH8B4/RepRap.org - 2014 - RepRap Family Tree - RepRapWiki.html} -} - -@article{Reale2019, - title = {Governing Innovation Systems: {{A Parsonian}} Social Systems Perspective}, - author = {Reale, Filippo}, - year = {2019}, - month = nov, - journal = {Technology in Society}, - volume = {59}, - pages = {101174}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.101174}, - urldate = {2020-05-21}, - abstract = {This article develops the observation that systemic and functional reasoning is pertinent yet tacit in current political economy of innovation systems. Starting from this, it elaborates a distinct Parsonian perspective on innovation systems which treats them as systems in a sociological sense. This means that they possess crucial functions which need to be fulfilled for the innovation system to work and persist. A perspective on ``crucial functions'' adds fruitful new insights to theories on innovation systems and proposes new aspects for successful innovation policy.}, - keywords = {Innovation policy,Innovation systems,Systems theory} -} - -@article{realeEcosystemServicesBallast2022, - title = {Ecosystem Services as a Ballast to Guide Sustained Economic Growth by Biodiversity Conservation Actions}, - author = {Reale, Ricardo and Ribas, Luiz C{\'e}sar and Magro Lindenkamp, Teresa Cristina}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {358}, - pages = {131846}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131846}, - urldate = {2022-05-23} -} - -@article{Rebaioli2017, - title = {A Review on Benchmark Artifacts for Evaluating the Geometrical Performance of Additive Manufacturing Processes}, - author = {Rebaioli, Lara and Fassi, Irene}, - year = {2017}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {93}, - number = {5-8}, - pages = {2571--2598}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-017-0570-0}, - abstract = {In recent years, additive manufacturing (AM) has undergone a rapid growth, therefore several process-es based on different working principles (e.g. photopolymerization, sintering, extrusion, material jet-ting, etc) are now available and allow to manufacture parts using a wide range of materials. Consequently, the so-called benchmark artifacts are necessary to assess the capabilities and limitations of each AM process or to compare the performance of different processes. This pa-per focuses on the benchmark artifacts for evaluating the geometrical performance of AM processes and proposes an extensive review of the available literature, analyzing the design of such test parts in detail. The investigated test parts are classified according to the process aspect that they are able to evaluate (dimensional/geometrical accuracy, repeatability, minimum feature size) and the combination AM process/materials for which they have been used. In addition, the paper draws a summary of guidelines to design benchmark artifacts for geometrical performance evaluation.}, - keywords = {Additive manufacturing,Benchmarking,Performance evaluation,Rapid prototyping,Test artifact}, - file = {/Users/fabio/Zotero/storage/Z829Z4EG/A review on benchmark artifacts for evaluating the geometrical performance of additive manufacturing processes.pdf} -} - -@article{rebolledo-leivaAttributionalConsequentialLife2023, - title = {Attributional and Consequential Life Cycle Perspectives of Second-Generation Polylactic Acid: {{The}} Benefits of Integrating a Recycling Strategy}, - shorttitle = {Attributional and Consequential Life Cycle Perspectives of Second-Generation Polylactic Acid}, - author = {{Rebolledo-Leiva}, Ricardo and Ladakis, Dimitrios and Ioannidou, Sofia-Maria and Koutinas, Apostolis and Moreira, Maria Teresa and {Gonz{\'a}lez-Garc{\'i}a}, Sara}, - year = {2023}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {420}, - pages = {138354}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.138354}, - urldate = {2023-08-31}, - abstract = {The climate crisis calls for a shift from petrochemicals to bio-based products to reduce environmental consequences. Polylactic acid (PLA) is one of the most widely used biopolymers, due to its mechanical properties and renewable origin, to produce bio-based compostable plastic for food packaging. The objective of this study is to determine the environmental feasibility of a second-generation PLA production based on wheat straw; and the role of a chemical recycling plant on the environmental performance of a bioproduct at an early design stage. A holistic assessment was performed through the Life Cycle Assessment (LCA) methodology considering both attributional and consequential perspectives, through a cradle-to-grave approach. The attributional LCA results show that lactic acid production was the main contributor due to the wheat straw pre-treatment and downstream separation and purification (DSP) processes. The integration of a recycling plant leads to a significant reduction of burdens, ranging from 1.38 to 0.44~kg CO2eq in the Global Warming category. Furthermore, consequential LCA results shows that the increased demand for substitute products for activities such as feeding, fertilisation and energy generation and the indirect emissions from land use change related to the conversion of land for the cultivation of raw materials are relevant factors in the environmental effects associated with the possible implementation of straw-based bioPLA production system.}, - keywords = {Bioplastic,Biorefinery,Circular economy,Consequential LCA,LCA,Recycling}, - file = {/Users/fabio/Zotero/storage/7K3B865Y/S095965262302512X.html} -} - -@article{Recovery1980, - title = {Packaging Materials: {{Industrial}} Possibilities for Resource Recovery}, - author = {Bridgwater, A.V.}, - year = {1980}, - month = jun, - journal = {Resource Recovery and Conservation}, - volume = {5}, - number = {1}, - pages = {51--72}, - issn = {03043967}, - doi = {10.1016/0304-3967(80)90022-0}, - file = {/Users/fabio/Zotero/storage/QV52EH6U/Bridgwater - 1980 - Packaging materials Industrial possibilities for resource recovery.pdf} -} - -@misc{RecyclebotRepRapWiki, - title = {Recyclebot - {{RepRapWiki}}}, - urldate = {2015-07-02}, - howpublished = {http://www.appropedia.org/Recyclebot} -} - -@article{Reddy2007, - title = {Fused Deposition Modelling Using Direct Extrusion}, - author = {Reddy, B. V. and Reddy, N. V. and Ghosh, A.}, - year = {2007}, - month = mar, - journal = {Virtual and Physical Prototyping}, - volume = {2}, - number = {1}, - pages = {51--60}, - issn = {1745-2759}, - doi = {10.1080/17452750701336486}, - urldate = {2015-01-21}, - file = {/Users/fabio/Zotero/storage/LCHJFR6V/Reddy, Reddy, Ghosh - 2007 - Fused deposition modelling using direct extrusion.pdf} -} - -@article{Reddy2018, - title = {Design and {{Development}} of Mini Plastic Shredder Machine}, - author = {Reddy, Sudhakara and Raju, Thunga}, - year = {2018}, - month = dec, - journal = {IOP Conference Series: Materials Science and Engineering}, - volume = {455}, - pages = {012119}, - issn = {1757-899X}, - doi = {10.1088/1757-899X/455/1/012119}, - file = {/Users/fabio/Zotero/storage/39TU8UJV/Design and Development of mini plastic shredder machine.pdf} -} - -@book{reddyIntroductionContinuumMechanics2013, - title = {An {{Introduction}} to {{Continuum Mechanics}}, {{Second Edition}}}, - author = {Reddy, J. N.}, - year = {2013}, - edition = {2}, - publisher = {{Cambridge University Press}}, - address = {{Cambridge}}, - doi = {10.1017/CBO9781139178952}, - urldate = {2023-09-13}, - isbn = {978-1-139-17895-2}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/FJ5BZGPZ/Reddy - 2013 - An Introduction to Continuum Mechanics, Second Edi.pdf} -} - -@article{Redlingshofer2020, - title = {Are Waste Hierarchies Effective in Reducing Environmental Impacts from Food Waste? {{A}} Systematic Review for {{OECD}} Countries}, - author = {Redlingsh{\"o}fer, Barbara and Barles, Sabine and Weisz, Helga}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {156}, - pages = {104723}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104723} -} - -@article{Reed2016, - title = {Women, Work, and Revolution: {{A}} Do-It-Yourself Practice}, - author = {Reed, Sara Desvernine}, - year = {2016}, - journal = {Design and Culture}, - volume = {8}, - number = {1}, - pages = {27--54}, - publisher = {{Routledge}}, - issn = {17547083}, - doi = {10.1080/17547075.2016.1142337}, - keywords = {Cuba,Design,Do-it-yourself,Labor,Magazines,Women,Work}, - file = {/Users/fabio/Zotero/storage/DQ2AZY6I/Women Work and Revolution A Do It Yourself Practice.pdf} -} - -@article{reedPlasticsCrashCourse2022, - title = {Plastics {{Crash Course}}: {{A Website}} for {{Teaching Plastics Recycling}} and {{Microplastics Prevention}} through {{Infographics}}}, - shorttitle = {Plastics {{Crash Course}}}, - author = {Reed, Madison R. and Chen, Wan-Ting}, - year = {2022}, - month = oct, - journal = {Recycling}, - volume = {7}, - number = {5}, - pages = {65}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2313-4321}, - doi = {10.3390/recycling7050065}, - urldate = {2022-09-18}, - abstract = {Microplastic particles have been found virtually everywhere, including within our food and drinking water. While the implications of microplastics on human health are not fully known, early effects have been seen on marine life and the environment. Studies have shown that microplastics can cause changes in the reproductive habits of marine life by blocking digestive tracts, causing abrasions to the mouth and esophagi of small animals upon ingestion, and altering feeding behavior. While much of the blame for our plastics pollution problem should be shifted to irresponsible manufacturing, we as consumers must make choices to benefit the environment by reducing our use and learning how to effectively recycle plastic waste. The Plastics Crash Course combines visual learning with plastics recycling knowledge to educate the public about why we need plastics and why we should recycle them. Microplastics formation and general guides for plastic recycling were also included in the Plastics Crash Course. Out of 120 participants, 95\% responded that they had learned new information. From the pre-survey, participants responded, saying they thought all plastic was the same and that it just varied in density to provide different properties, so they would recycle everything. After reading the infographics on the Plastics Crash Course website, most participants said they learned what plastics can be recycled and what their resin identifying codes mean, how microplastics form, and that there is more than one type of plastic.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {engineering,engineering education,infographics,mathematics (STEAM) education,plastic recycling,remote learning,science,technology,the arts}, - file = {/Users/fabio/Zotero/storage/QZID7PMU/Reed_Chen_2022_Plastics Crash Course.pdf} -} - -@article{reeseSARSCov2EnvironmentalProtection2020, - title = {{{SARS-Cov-2}} and Environmental Protection: {{A}} Collective Psychology Agenda for Environmental Psychology Research}, - author = {Reese, Gerhard and Hamann, Karen R.S. and Heidbreder, Lea M. and Loy, Laura and Menzel, Claudia and Neubert, Sebastian and Tr{\"o}ger, Josephine and Wullenkord, Marlis C.}, - year = {2020}, - month = jun, - journal = {Journal of Environmental Psychology}, - pages = {101444}, - publisher = {{Academic Press}}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2020.101444}, - urldate = {2020-06-07}, - file = {/Users/fabio/Zotero/storage/MXI8QUMA/full-text.pdf} -} - -@article{referencesdesimoneGOSKnowledgeHub2022, - title = {The {{GOS}} 4 {{M Knowledge Hub}}: A Web-Based Effec-Tiveness Evaluation Platform in Support of the {{Minamata Convention}} on {{Mercury}}}, - author = {References De Simone, F and D'amore, F and Bencardino, M and Carbone, F and Hedgecock, I M and Sprovieri, F and Cinnirella, S and Pirrone, N. ; De and Simone, F and Bruno, D and Pirrone, N and Georgiadis, C and Patias, P and Verde, N and Tsioukas, V and Kaimaris, D and Georgoula, O and Kocman, D and Athanasopoulou, E and Speyer, O and Raudner, A and Karl, M and Gerasopoulos, E and {State-Of-Mazzetti}, P and Nativi, S and Santoro, M and Giuliani, G and Rodila, D and Folino, A and Caruso, S and Aracri, G and Lehmann, A ; and Xxx, Xxx-Xxx and Melymuk, L and Bohlin Nizzetto, P and Harner, T and White, K B and Wang, X and Tominaga, M and He, J and Li, J and Ma, J and Ma, W L and Aristiz{\'a}bal, B and Dryer, A and Jim{\'e}nez, B and {Mu{\~n}oz-Arnanz}, J and Odabasi, M and Dumanoglu, Y and Yaman, B and Graf, C and Sweetman, A and Kl{\'a}nov{\'a}, J}, - year = {2022}, - journal = {Environmental Science and Policy}, - volume = {129}, - pages = {1--13}, - urldate = {2022-01-25}, - abstract = {state-of-the-art modeling tools and data available in the literature. The Knowledge Hub currently integrates a Chemical Transport Model emulator, HERMES, coupled with a biogeochemical model, although it has been designed to house and deploy any number of different modeling components. Using the integrated dashboard, non-experts can perturb mercury releases from different anthropogenic emission sectors, simulating, for example, the application of Best Available Technologies, and then visualize in real-time the short-and long-term effects of the consequent reductions within a source-receptor framework. The dashboard also furnishes an estimate of the statistical significance of the changes in the model results. The analysis of a set of anthropogenic Hg emission reduction scenarios shows how an internationally coordinated effort would be necessary to achieve significant policy goals. It is important to note that the GOS 4 M-KH yields the analysis presented here in a matter of seconds, compared to the days or weeks required by traditional modeling tools. In De Simone et al. (2022), an optimization framework (HERME-S-OPT) that exploits the numerical features of the CTM emulator is presented. With HERMES-OPT it is now feasible to address real-life problems in the area of pollution management using the solver algorithms available. In the paper, a first example based on the Mixed Integer Linear Program model has been applied to explore feasible targets of the MCM. The optimization model enabled the evaluation of the minimum number of geographical source regions which needed to introduce Hg emissions abatement for a single emissions macro-sector, in order to reach a specific target of environmental interest. The results indicate that for a number of oceans basins it is not feasible to reach the specified target acting only on a single industrial macro-sector from specific source regions but an internationally coordinated abatement effort is required to obtain meaningful results. In Melymuk et al. (2021), a global intercomparison of polyurethane foam passive air samplers is proposed by evaluating variability in semi-volatile organic compounds sampler design and analysis. Differences in sampler design lead to small variations in sampler performance. Laboratories report very different concentrations of pollutants from the same sample. Analytical uncertainties must be addressed for comparability of air monitoring data. In Noe et al. (2021), the main outcomes from iCUPE and the novel and comprehensive data sets are described. A key development of the methodology provided novel model results on concentration of poly-chlorinated biphenyl-153 in breast milk at a global scale. The results indicated that the human exposure in the Arctic is driven by accumulation through the marine food chain, which is in turn proportional to concentrations of pollutants in air and marine water. In addition, there is a high uncertainty on the Arctic diet scenario, and there are very little Arctic monitoring data for comparison. Will action taken under the Minamata Convention on mercury need to be coordinated internationally? Evidence from an optimisation study suggests it will. Environ. Sci. Policy 127, 22-30. Esau, I., Bobylev, L., Donchenko, V., Gnatiuk, N., Lappalainen, H.K., Konstantinov, P., Kulmala, M., Mahura, A., Makkonen, R., Manvelova, A., Miles, V., Pet\"aj\"a, T., Poutanen, P., Fedorov, R., Varentsov, M., Wolf, T., Zilitinkevich, S., Baklanov, A., 2021. An enhanced integrated approach to knowledgeable high-resolution environmental quality assessment. Paasonen P., 2021. Earth observation: an integral part of a smart and sustainable city, Environ. Sci. Policy, XXX, XXX-XXX. Lehmann A., Mazzetti P., Santoro M., Mas\'o J., Serral I., Spengler D., Niamir A., Lacroix P., Ambrosone M., McCallum I., Kussul N., Patias P., Rodila D., Ray N., Giuliani G., 2021. Essential variables from earth observation for environmental multi-scale indicators and policies, Environ. Sci. Policy, XXX, XXX-XXX.}, - file = {/Users/fabio/Zotero/storage/RRARZITG/full-text.pdf} -} - -@article{Reich2019, - title = {Mechanical {{Properties}} and {{Applications}} of {{Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing}}}, - author = {Reich, Matthew J. and Woern, Aubrey L. and Tanikella, Nagendra G. and Pearce, Joshua M.}, - year = {2019}, - month = may, - journal = {Materials}, - volume = {12}, - number = {10}, - pages = {1642}, - issn = {1996-1944}, - doi = {10.3390/ma12101642}, - abstract = {Past work has shown that particle material extrusion (fused particle fabrication (FPF)/fused granular fabrication (FGF)) has the potential for increasing the use of recycled polymers in 3D printing. This study extends this potential to high-performance (high-mechanical-strength and heat-resistant) polymers using polycarbonate (PC). Recycled PC regrind of approximately 25 mm2 was 3D printed with an open-source Gigabot X and analyzed. A temperature and nozzle velocity matrix was used to find useful printing parameters, and a print test was used to maximize the output for a two-temperature stage extruder for PC. ASTM type 4 tensile test geometries as well as ASTM-approved compression tests were used to determine the mechanical properties of PC and were compared with filament printing and the bulk virgin material. The results showed the tensile strength of parts manufactured from the recycled PC particles (64.9 MPa) were comparable to that of the commercial filament printed on desktop (62.2 MPa) and large-format (66.3 MPa) 3D printers. Three case study applications were investigated: (i) using PC as a rapid molding technology for lower melting point thermoplastics, (ii) printed parts for high temperature applications, and (iii) printed parts for high-strength applications. The results show that recycled PC particle-based 3D printing can produce high-strength and heat-resistant products at low costs.}, - isbn = {1906487146}, - keywords = {3d printing,additive manufacturing,circular economy,distributed manufacturing,extruder,polycarbonate,polymers,recycling,upcycle,waste plastic}, - file = {/Users/fabio/Zotero/storage/QA593NX7/Mechanical properties and applications of recycled polycarbonate particle material extrusion-based additive manufacturing.pdf} -} - -@article{reijonenFactorsRelatedRecycling2021, - title = {Factors Related to Recycling Plastic Packaging in {{Finland}}'s New Waste Management Scheme}, - author = {Reijonen, Helen and Bellman, Steven and Murphy, Jamie and Kokkonen, Henna}, - year = {2021}, - month = jul, - journal = {Waste Management}, - volume = {131}, - pages = {88--97}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.05.034}, - urldate = {2021-06-10}, - file = {/Users/fabio/Zotero/storage/3YDEV4RN/full-text.pdf} -} - -@article{reikeCircularEconomyNew2018, - title = {The Circular Economy: {{New}} or {{Refurbished}} as {{CE}} 3.0? \textemdash{} {{Exploring Controversies}} in the {{Conceptualization}} of the {{Circular Economy}} through a {{Focus}} on {{History}} and {{Resource Value Retention Options}}}, - author = {Reike, Denise and Vermeulen, Walter J.V. and Witjes, Sjors}, - year = {2018}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {135}, - pages = {246--264}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2017.08.027}, - urldate = {2022-03-13}, - abstract = {Over the last decade, the concept of the circular economy has regained attention, especially related to efforts to achieve a more sustainable society. The `revival' of the circular economy has been accompanied by controversies and confusions across different actors in science and practice. With this article we attempt at contributing to advanced clarity in the field and providing a heuristic that is useful in practice. Initially, we take a focus on the historical development of the concept of circular economy and value retention options (ROs) for products and materials aiming for increased circularity. We propose to distinguish three phases in the evolution of the circular economy and argue that the concept - in its dominant framing - is not as new as frequently claimed. Having established this background knowledge, we give insights into `how far we are' globally, with respect to the implementation of circularity, arguing that high levels of circularity have already been reached in different parts of the globe with regard to longer loop value retention options, such as energy recovery and recycling. Subsequently, we show that the confusion surrounding the circular economy is more far reaching. We summarize the divergent perspectives on retention options and unite the most common views a 10R typology. From our analyses, we conclude that policymakers and businesses should focus their efforts on realization of the more desirable, shorter loop retention options, like remanufacturing, refurbishing and repurposing - yet with a view on feasibility and overall system effects. Scholars, on the other hand, should assist the parties contributing to an increased circular economy in practice by taking up a more active role in attaining consensus in conceptualizing the circular economy.}, - keywords = {Circular economy,Circularity,Closed-loop economy,Literature review,Value preservation}, - file = {/Users/fabio/Zotero/storage/K2A8UGZQ/full-text.pdf} -} - -@inproceedings{Reilly1994, - title = {Benchmarking of {{Rapid Prototyping Systems}} - {{Beginning}} to {{Set Standards}}}, - booktitle = {Solid {{Freeform Fabrication Proceedings}}}, - author = {Jayaram, Dureen and Bagchi, Amit and {Jara-Ammonte}, C.C. and O'Reilly, Sean}, - editor = {Harris L., Marcus and Beaman, Joseph J. and Barlow, Joel W. and Bourell, David L. and Crawford, Richard H.}, - year = {1994}, - pages = {146--153}, - address = {{Austin}}, - file = {/Users/fabio/Zotero/storage/TZNCECDZ/m-api-4e080b22-cff4-7457-0f93-2c0854053e6d.pdf} -} - -@article{reinauerDeterminantsAdoptionOpensource2021, - ids = {Reinauer2021,reinauer2021a}, - title = {Determinants of Adoption in Open-Source Hardware: {{A}} Review of Small Wind Turbines}, - author = {Reinauer, Tobias and Hansen, Ulrich Elmer}, - year = {2021}, - month = apr, - journal = {Technovation}, - pages = {102289}, - publisher = {{Elsevier}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2021.102289}, - urldate = {2021-04-30}, - keywords = {Open-source,Open-source hardware,Small wind turbines,Technology adoption,Technology diffusion}, - file = {/Users/fabio/Zotero/storage/YF3C9RHK/Reinauer y Hansen - 2021 - Determinants of adoption in open-source hardware .pdf;/Users/fabio/Zotero/storage/ISF47QKT/S0166497221000705.html} -} - -@article{rejebInternetThingsCircular2022, - title = {The {{Internet}} of {{Things}} and the Circular Economy: {{A}} Systematic Literature Review and Research Agenda}, - author = {Rejeb, Abderahman and Suhaiza, Zailani and Rejeb, Karim and Seuring, Stefan and Treiblmaier, Horst}, - year = {2022}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {350}, - pages = {131439}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131439}, - urldate = {2022-04-11} -} - -@article{Rejeski2017, - title = {Research {{Needs}} and {{Recommendations}} on {{Environmental Implications}} of {{Additive Manufacturing}}}, - author = {Rejeski, David and Zhao, Fu and Huang, Yong}, - year = {2017}, - journal = {Additive Manufacturing}, - volume = {19}, - pages = {21--28}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2017.10.019}, - isbn = {0013523927303}, - keywords = {additive manufacturing,environmental implication}, - file = {/Users/fabio/Zotero/storage/E33XL3PM/Research needs and recommendations on environmental implications of additive manufacturing.pdf} -} - -@book{Ren2011, - title = {Biodegradable {{Poly}}({{Lactic Acid}}): {{Synthesis}}, {{Modification}}, {{Processing}} and {{Applications}}}, - author = {Ren, Jie}, - year = {2011}, - publisher = {{Springer Berlin Heidelberg}}, - address = {{Berlin, Heidelberg}}, - doi = {10.1007/978-3-642-17596-1}, - isbn = {978-3-642-17595-4} -} - -@article{Ren2020, - title = {Life-Cycle Environmental Implications of {{China}}'s Ban on Post-Consumer Plastics Import}, - author = {Ren, Yanan and Shi, Lei and Bardow, Andr{\'e} and Geyer, Roland and Suh, Sangwon}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {156}, - pages = {104699}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104699} -} - -@article{renCircularEconomyImpact2023, - title = {Toward Circular Economy: {{The}} Impact of Policy Instruments on Circular Economy Innovation for {{European}} Small Medium Enterprises}, - shorttitle = {Toward Circular Economy}, - author = {Ren, Qiuzhen and Albrecht, Johan}, - year = {2023}, - month = may, - journal = {Ecological Economics}, - volume = {207}, - pages = {107761}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107761}, - urldate = {2023-02-12}, - abstract = {The transition from current linear economy toward a circular economy (CE) needs the adoption and diffusion of circular economy innovation (CEI). However, the rate and direction of CEI influenced by policy instruments are still not well understood. This paper explores the roles of demand-pull and technology-push policy instruments in shaping CEI in Europe. The different impacts on the adoption across different sectors and the specific effects on each circularity innovation pattern are also examined. The findings indicate that both command-and-control regulation and technology-push instruments are significant in stimulating Small Medium Enterprises' (SMEs') adoption of CEI. While the environmental tax hinders SMEs' implementation of CEI in the whole economic activity sectors, it is a significant driver of CEI for SMEs in the manufacturing sector. The technology-push instrument strongly encourages SMEs to invest in re-planning and re-designing activities to minimize the usage or maximize the re-usage of water, energy, and materials. Environmental tax highly determines SMEs' adoption of CEI related to improving energy efficiency. In contrast, the command-and-control regulation significantly increases SMEs' likelihood to undertake innovation activity in minimizing waste by recycling or reusing the waste. Our study elucidates the potential interactions between policy instruments and CEI, paving the way toward the desirable CE.}, - langid = {english}, - keywords = {Circular economy innovation,Command-and-control regulation,Market-based instrument,Public R\&D stock on environment and energy,Small medium enterprises}, - file = {/Users/fabio/Zotero/storage/FX876ZGL/Ren_Albrecht_2023_Toward circular economy.pdf;/Users/fabio/Zotero/storage/4PMG77T3/S0921800923000241.html} -} - -@article{Rengarajan2021, - title = {Strategy Tools in Dynamic Environments \textendash{} {{An}} Expert-Panel Study}, - author = {Rengarajan, Srinath and Moser, Roger and Narayanamurthy, Gopalakrishnan}, - year = {2021}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {165}, - pages = {120560}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120560}, - urldate = {2021-01-13}, - abstract = {Strategy tools and frameworks are crucial for managers to navigate their business environment and formulate strategies. Extant research has focused on the characteristics, dimensions, applications, and impact of traditional tools. However, there are questions regarding the suitability of these tools to the increasingly dynamic environments faced by strategy practitioners characterized by blurring industry boundaries, uncertainty, and ambiguity. Using an expert-panel approach, we address this research gap by investigating how strategy experts from practice and academia assess established strategy tools in dynamic environment. We identify the characteristics of strategy tools that experts value in such contexts and which can inform future development of context-specific strategy tools. Additionally, we also investigate why experts select and apply specific tools and how they combine these tools. Our findings further allow us to explore the difference in perspectives of strategy scholars and practitioners, which is necessary to reconcile the gap between strategy theory and practice. Finally, we discuss implications of the study for strategy and management research, education, and practice.}, - keywords = {Contextual fit,Dynamic environments,Information processing,Strategy frameworks,Strategy tools}, - file = {/Users/fabio/Zotero/storage/Y82X5D3V/full-text.pdf} -} - -@article{Rengier2010, - title = {{{3D}} Printing Based on Imaging Data: Review of Medical Applications}, - author = {Rengier, F. and Mehndiratta, A. and {von Tengg-Kobligk}, H. and Zechmann, C. M. and Unterhinninghofen, R. and Kauczor, H.-U. and Giesel, F. L.}, - year = {2010}, - month = jul, - journal = {International Journal of Computer Assisted Radiology and Surgery}, - volume = {5}, - number = {4}, - pages = {335--341}, - issn = {1861-6410}, - doi = {10.1007/s11548-010-0476-x}, - abstract = {PURPOSE: Generation of graspable three-dimensional objects applied for surgical planning, prosthetics and related applications using 3D printing or rapid prototyping is summarized and evaluated. MATERIALS AND METHODS: Graspable 3D objects overcome the limitations of 3D visualizations which can only be displayed on flat screens. 3D objects can be produced based on CT or MRI volumetric medical images. Using dedicated post-processing algorithms, a spatial model can be extracted from image data sets and exported to machine-readable data. That spatial model data is utilized by special printers for generating the final rapid prototype model. RESULTS: Patient-clinician interaction, surgical training, medical research and education may require graspable 3D objects. The limitations of rapid prototyping include cost and complexity, as well as the need for specialized equipment and consumables such as photoresist resins. CONCLUSIONS: Medical application of rapid prototyping is feasible for specialized surgical planning and prosthetics applications and has significant potential for development of new medical applications.}, - isbn = {1154801004}, - pmid = {20467825} -} - -@article{rennTransdisciplinaritySynthesisModular2021, - title = {Transdisciplinarity: {{Synthesis}} towards a Modular Approach}, - author = {Renn, Ortwin}, - year = {2021}, - month = apr, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102744}, - urldate = {2021-04-23}, - file = {/Users/fabio/Zotero/storage/U4RLCSVW/full-text.pdf} -} - -@article{renoufEvaluationApproachesAdvancing2017, - title = {Evaluation {{Approaches}} for {{Advancing Urban Water Goals}}}, - author = {Renouf, Marguerite A. and Kenway, Steven J.}, - year = {2017}, - month = aug, - journal = {Journal of Industrial Ecology}, - volume = {21}, - number = {4}, - pages = {995--1009}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.12456}, - urldate = {2022-02-22}, - abstract = {Urban areas (especially cities) are challenged in meeting their direct water needs from local sources. They also exert strain on global water resources through their indirect (virtual) water use. Agencies concerned with urban water management have visions and goals for managing direct water use, but indirect use is only inferred in more global visions for sustainable consumption. There is limited quantification of ``urban water performance'' at the macro urban scale (whole of city) to monitor progress toward these goals. It is constrained by a lack of clarity about the evaluation approaches that best serve them. We ask, How can the evaluation approaches described in literature advance urban water management goals? We reviewed the utility of eight evaluation approaches, including urban water system modeling, urban metabolism (territorial and mass balance), consumption (life cycle assessment, water footprinting, and input-output analysis), and complex systems (ecological network analysis and systems dynamics) approaches. We found that urban metabolism based on water mass balance is a core method for generating information to inform current goals for direct urban water use, with potential for being ``coupled'' with the other approaches. Consumption approaches inform the management of indirect water use. We describe this in a framework for urban water evaluation to give greater clarity to this field and flag the further research that would be needed to progress this. It includes the recommendation to differentiate the evaluation of direct and indirect urban water, but to also interpret them together.}, - keywords = {cities,industrial ecology,performance indicators,urban hydrology,urban water systems,water efficiency}, - file = {/Users/fabio/Zotero/storage/ABMM5CCM/full-text.pdf} -} - -@misc{ReportsAndData2019, - title = {{{ReportsAndData2019}}}, - author = {Data, Reports And}, - year = {2019}, - journal = {Additive Manufacturing Market To Reach USD 23.33 Billion By 2026}, - urldate = {2019-07-13}, - howpublished = {http://www.globenewswire.com/news-release/2019/03/18/1756526/0/en/Additive-Manufacturing-Market-To-Reach-USD-23-33-Billion-By-2026.html} -} - -@misc{RepRap.org2013, - title = {Arduino {{Mega Pololu Shield}} - {{RepRapWiki}}}, - author = {{RepRap.org}}, - year = {2013}, - howpublished = {http://reprap.org/wiki/RAMPS} -} - -@misc{RepRapPro2014, - title = {Melzi - {{RepRapWiki}}}, - author = {{RepRapPro}}, - year = {2014}, - urldate = {2014-02-21}, - howpublished = {http://reprap.org/wiki/Melzi} -} - -@misc{RepRapWiki2014, - title = {{{RepRap Options}} -}, - author = {{RepRapWiki}}, - year = {2014}, - urldate = {2014-12-21}, - howpublished = {http://reprap.org/wiki/RepRap\_Options} -} - -@article{ResearchGroupCollaborativeSpaces2016, - title = {Coworkers , {{Makers}} and {{Hackers}} in the {{City}} : {{Reinventing Policies}} , {{Corporate Strategies}} and {{Citizenship}} ?}, - author = {{Research Group Collaborative Spaces}}, - year = {2016}, - pages = {50} -} - -@article{ResearchMethodsBusiness, - title = {Research {{Methods}} for {{Business}}}, - langid = {english}, - file = {/Users/fabio/Documents/0-Biblio/Research Skills/Uma Sekaran, Roger Bougie - Research Methods For Business_ A Skill Building Approach (2016, Wiley).pdf} -} - -@article{Reuter2016, - title = {Digitalizing the {{Circular Economy}}: {{Circular Economy Engineering Defined}} by the {{Metallurgical Internet}} of {{Things}}}, - author = {Reuter, Markus A.}, - year = {2016}, - journal = {Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science}, - volume = {47}, - number = {6}, - pages = {3194--3220}, - publisher = {{Springer US}}, - issn = {10735615}, - doi = {10.1007/s11663-016-0735-5}, - abstract = {Metallurgy is a key enabler of a circular economy (CE), its digitalization is the metallurgical Internet of Things (m-IoT). In short: Metallurgy is at the heart of a CE, as metals all have strong intrinsic recycling potentials. Process metallurgy, as a key enabler for a CE, will help much to deliver its goals. The first-principles models of process engineering help quantify the resource efficiency (RE) of the CE system, connecting all stakeholders via digitalization. This provides well-argued and first-principles environmental information to empower a tax paying consumer society, policy, legislators, and environmentalists. It provides the details of capital expenditure and operational expenditure estimates. Through this path, the opportunities and limits of a CE, recycling, and its technology can be estimated. The true boundaries of sustainability can be determined in addition to the techno-economic evaluation of RE. The integration of metallurgical reactor technology and systems digitally, not only on one site but linking different sites globally via hardware, is the basis for describing CE systems as dynamic feedback control loops, i.e., the m-IoT. It is the linkage of the global carrier metallurgical processing system infrastructure that maximizes the recovery of all minor and technology elements in its associated refining metallurgical infrastructure. This will be illustrated through the following: (1) System optimization models for multimetal metallurgical processing. These map large-scale m-IoT systems linked to computer-aided design tools of the original equipment manufacturers and then establish a recycling index through the quantification of RE. (2) Reactor optimization and industrial system solutions to realize the ``CE (within a) Corporation\textemdash CEC,'' realizing the CE of society. (3) Real-time measurement of ore and scrap properties in intelligent plant structures, linked to the modeling, simulation, and optimization of industrial extractive process metallurgical reactors and plants for both primary and secondary materials processing. (4) Big-data analysis and process control of industrial metallurgical systems, processes, and reactors by the application of, among others, artificial intelligence techniques and computer-aided engineering. (5) Minerals processing and process metallurgical theory, technology, simulation, and analytical tools, which are all key enablers of the CE. (6) Visualizing the results of all the tools used for estimating the RE of the CE system in a form that the consumer and general public can understand. (7) The smart integration of tools and methods that quantify RE and deliver sustainable solutions, named in this article as circular economy engineering. In view of space limitations, this message will be colored in by various publications also with students and colleagues, referring to (often commercial) software that acts as a conduit to capture and formalize the research of the large body of work in the literature by distinguished metallurgical engineers and researchers and realized in innovative industrial solutions. The author stands humbly on the shoulders of these developments and their distinguished developers. This award lecture article implicitly also refers to work done while working for Ausmelt (Australia), Outotec (Finland and Australia), Mintek (South Africa), and Anglo American Corporation (South Africa), honoring the many colleagues the author has worked with over the years. \textcopyright{} 2016 The Minerals, Metals \& Materials Society and ASM International}, - isbn = {10735615 (ISSN)}, - pmid = {11172282}, - file = {/Users/fabio/Zotero/storage/UTK57SKT/Digitalizing the Circular Economy.pdf} -} - -@article{Review1993, - title = {Johnson Matthey}, - author = {Review, Technology}, - year = {1993}, - journal = {Applied Catalysis A: General}, - volume = {104}, - number = {2}, - pages = {N19}, - issn = {0926860X}, - doi = {10.1016/0926-860X(93)85108-2}, - abstract = {The use of various sintering technologies, allied to suitable powder metallurgy, has long been the subject of discussion within the global jewellery manufacturing community. This exciting, once theoretical and experimental technology is now undoubtedly a practical application suitable for the jewellery industry. All parts of the jewellery industry supply and value chains, and especially design and manufacturing, now need to become aware very quickly of just how unsettling and disruptive this technology introduction has the potential to become. This paper will offer various viewpoints that consider not only the technology and its application to jewellery manufacture but will also consider the new design potentials of the technology to the jewellery industry. It will also briefl y consider how that design potential is being taught to future generations of jewellery designers at the Birmingham School of Jewellery. We shall also discuss in some detail the economics of and potential for new and different business models that this technological paradigm might offer the jewellery industry}, - isbn = {9781849738859}, - pmid = {22742100}, - file = {/Users/fabio/Zotero/storage/292I4F7N/Additive Manufacturing Technologies- Rapid Prototyping to Direct Digital Manufacturing (2010).pdf} -} - -@article{Review2017, - title = {How {{Workspace Design Fosters Innovation}} - {{Steelcase}}}, - author = {Review, Harvard Business}, - year = {2017}, - pages = {1--12} -} - -@article{Rey-Mazon2018, - ids = {Rey-Mazon2018a}, - title = {Public {{Lab}}: {{Community-Based Approaches}} to {{Urban}} and {{Environmental Health}} and {{Justice}}}, - author = {{Rey-Maz{\'o}n}, Pablo and Keysar, Hagit and Dosemagen, Shannon and D'Ignazio, Catherine and Blair, Don}, - year = {2018}, - month = jun, - journal = {Science and Engineering Ethics}, - volume = {24}, - number = {3}, - pages = {971--997}, - publisher = {{Springer Netherlands}}, - issn = {1353-3452}, - doi = {10.1007/s11948-018-0059-8}, - urldate = {2020-10-02}, - abstract = {This paper explores three cases of Do-It-Yourself, open-source technologies developed within the diverse array of topics and themes in the communities around the Public Laboratory for Open Technology and Science (Public Lab). These cases focus on aerial mapping, water quality monitoring and civic science practices. The techniques discussed have in common the use of accessible, community-built technologies for acquiring data. They are also concerned with embedding collaborative and open source principles into the objects, tools, social formations and data sharing practices that emerge from these inquiries. The focus is on developing processes of collaborative design and experimentation through material engagement with technology and issues of concern. Problem-solving, here, is a tactic, while the strategy is an ongoing engagement with the problem of participation in its technological, social and political dimensions especially considering the increasing centralization and specialization of scientific and technological expertise. The authors also discuss and reflect on the Public Lab's approach to civic science in light of ideas and practices of citizen/civic veillance, or ``sousveillance'', by emphasizing people before data, and by investigating the new ways of seeing and doing that this shift in perspective might provide.}, - pmid = {29725937}, - keywords = {Aerial mapping,Civic science,Community engagement,Do-It-Yourself,Open hardware,Open source,Participatory design,Sousveillance,Water quality} -} - -@article{reyes-garciaDecarbonizingAcademicSector2022, - title = {Decarbonizing the Academic Sector: {{Lessons}} from an International Research Project}, - shorttitle = {Decarbonizing the Academic Sector}, - author = {{Reyes-Garc{\'i}a}, Victoria and Graf, Lorena and Junqueira, Andr{\'e} B. and Madrid, Cristina}, - year = {2022}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {368}, - pages = {133174}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133174}, - urldate = {2022-08-05}, - abstract = {Research activities generate considerable carbon emissions. Some universities and research centers have implemented voluntary measures to reduce academia's carbon footprint. To contribute to the debate on pathways to decarbonize the academic sector, this work calculates the carbon emissions of an international research project in relation to 1) research-related travel, 2) researchers' non-business travel derived from the international nature of the team, 3) researchers' commuting, and 4) project's digital footprint. The work then simulates the project's carbon potential reduction under two scenarios and discusses emissions reduction alternatives and their potential side-effects. The project examined emitted an estimate of 161 tons CO2-eq, which could have been largely reduced to 92 tons CO2-eq (or 53\% of the emissions) by applying a standard set of measures already proposed by scholars aiming to decarbonize research (``Reduced emissions scenario'') or to 4 tons CO2-eq (or 2.4\% of the estimated emissions) by applying more strict measures aiming to reach carbon neutrality (``Net-zero emissions scenario''). Most emissions reductions come from reducing travel. While the measures proposed could indeed save a substantial amount of emissions, they might have also impacted project's academic outputs, economic costs, and researcher's work-life balance. Although collateral impacts of decarbonizing measures are yet little understood, they are likely not negligible and should be considered in a decision-oriented context to discern acceptable from unacceptable rules. The article discusses reliance on individual or voluntary action as the major bottlenecks that hamper the application of measures to decarbonize the academic sector and calls for the development of normative standards of scientific research practice that encourage, value or even impose the reduction of carbon emissions.}, - langid = {english}, - keywords = {Air travel,Carbon budget,Commuting,International mobility,Paris agreement}, - file = {/Users/fabio/Zotero/storage/MJZSXP36/Reyes-García et al_2022_Decarbonizing the academic sector.pdf;/Users/fabio/Zotero/storage/EYPSF9P3/S0959652622027627.html} -} - -@article{RezaeeVessal2021, - title = {Overcoming Stressful Life Events at Do-It-Yourself ({{DIY}}) Laboratories. {{A}} New Trailblazing Career for Disadvantaged Entrepreneurs}, - author = {Rezaee Vessal, Saeedeh and {Partouche-Sebban}, Judith and Scuotto, Veronica and Maalaoui, Adnane}, - year = {2021}, - month = mar, - journal = {Technological Forecasting and Social Change}, - volume = {164}, - pages = {120506}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120506}, - urldate = {2020-12-24}, - abstract = {Do it yourself (DIY) laboratories are the new experimental open source spaces where nascent entrepreneurs (or DIYers) get together to develop entrepreneurial ideas. Although these labs were originally established by scientists and biologists, they now include civil society, creating a mix and match between experts and non-experts. This group also includes another category of nascent entrepreneurs known as disadvantaged DIYers (DDIYers) who are making the most of these spaces. DDIYers encompass a different range of people such as immigrants, women, and the disabled. The latter calls for a new wave of research focused on DDIYers who are affected by chronic disease; these people motivated the present study that examined a sample of 27 DDIYers who created their own business after being diagnosed with cancer. The following will investigate their motivations. It will be seen that DDIYers are driven by external motivations oriented towards the desire to fulfill unmet needs; existential motivations oriented towards finding meaning in and control over one's life; as well as the aim of having an ideal profession and sharing a common project. With this in mind, policymakers and research institutions are encouraged to facilitate the establishment of DIY labs and the sharing of resources and knowledge.}, - keywords = {cancer survivors,Disadvantaged diyers,Diy laboratories,Entrepreneurship,Push and pull motivational approach} -} - -@article{rezaeirashtiDetectingMicroplasticsOrganicrich2023, - title = {Detecting Microplastics in Organic-Rich Materials and Their Potential Risks to Earthworms in Agroecosystems}, - author = {Rezaei Rashti, Mehran and Hintz, Jessica and Esfandbod, Maryam and Bahadori, Mohammad and Lan, Zhongming and Chen, Chengrong}, - year = {2023}, - month = jul, - journal = {Waste Management}, - volume = {166}, - pages = {96--103}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2023.04.047}, - urldate = {2023-05-11}, - abstract = {Microplastics (MPs) are a major emerging contaminant in agroecosystems, due to their significant resistance to degradation in terrestrial environments. Although previous investigations have reported the harmful effects of MPs contamination on soil biological properties, still little is known about the characteristics and fate of MPs in biosolid-amended soils and their risks to soil biota, particularly earthworms. We determined microplastics' concentration, size distribution, and chemical composition in 3 sewage sludge biosolids and 6 biosolid-amended agricultural soils. In addition, we assessed the potential short-term risks of MPs to earthworms' (Amynthas Gracilis and Eisenia Fetida) survival rate and fitness in an environmentally relevant exposure study (28~days). Biosolid-amended soils (1000\textendash 3100 MPs kg-1 dry mass) showed {$\approx$}30 times lower MPs content than investigated biosolids (55400\textendash 73800 MPs kg-1 dry mass), with microplastic fragment to fibre ratios between 0.2 and 0.6 and 0.3\textendash 0.4 in soils and biosolids, respectively. Total MPs dry mass was also {$\approx$}19 times lower in assessed soils (12\textendash 26~mg~kg-1) than biosolids (328\textendash 440~mg~kg-1). On average 77\% and 80\% of plastic fragments had a lower dimension than 500~\textmu m, while 50\% and 67\% of plastic fibres had a length of less than 1000~\textmu m in soil and biosolid samples, respectively. Polyethylene (23.6\%) was the major source of microplastic contamination in biosolid-amended soils, while polyethylene terephthalate (41.6\%) showed the highest concentration in biosolid samples. Spiked polyethylene MPs did not show any significant effect on earthworms' survival rate (93\textendash 99\%). However, biosolid application significantly (P~{$<~$}0.05) decreased survival rate of Eisenia Fetida (81\%) but showed no significant effect on Amynthas Gracilis (93\%). Biosolid amendment significantly (P~{$<~$}0.05) decreased earthworms' growth rate, with higher impact on Eisenia Fetida than Amynthas Gracilis, while there were no significant differences between control and microplastic spiked treatments. The overall decrease in MPs concentration of earthworm casts, compared with initial MPs concentrations in soil, indicated that the investigated species did not bioaccumulate MPs during the exposure experiment.}, - langid = {english}, - keywords = {Agroecosystems,Biosolid,Microplastics}, - file = {/Users/fabio/Zotero/storage/PFC7X79G/Rezaei Rashti et al. - 2023 - Detecting microplastics in organic-rich materials .pdf;/Users/fabio/Zotero/storage/IZ9YQI2F/S0956053X23003380.html} -} - -@article{rezayatHierarchicalRevenuesharingContract2020, - title = {A Hierarchical Revenue-Sharing Contract in Electronic Waste Closed-Loop Supply Chain}, - author = {Rezayat, Mohammad Reza and Yaghoubi, Saeed and Fander, Atieh}, - year = {2020}, - month = sep, - journal = {Waste Management}, - volume = {115}, - pages = {121--135}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.07.019}, - urldate = {2020-08-09}, - abstract = {Due to the growing concerns about the increasing release of consumer products to the environment, especially for defective electronic products, the management of the closed-loop supply chain (CLSC) is emerging. To do this, a chain consisting of a manufacturer, a retailer, and a collector is offered in a manufacturer-led Stackelberg game. Due to the presenting of some concepts in the model, which are provided by considering two categories of customers for primary and secondary goods, it is suitable for electronics supply chains. In order to coordinate between the members of the chain, a hierarchical revenue sharing (HRS) contract is introduced, which is suitable for some members of the chain where operate as a holding company. In the following, some numerical examples are applied to examine the applicability of the proposed models. The results of the sensitivity analysis on the main parameters of the problem indicate an increase in the profitability of all members in the coordination contract compared to the decentralized mode. Furthermore, customer sensitivity to price and quality has also inverse and direct impact to members' profitability, respectively. Each of the analyzes provides some in-depth managerial implications that can be considered for future research. Finally, another research result will explain the increase in the amount of return defective goods by the customer in the contract mode.}, - keywords = {Closed-loop supply chain,Coordination mechanism,Defective electronic products,Electronic waste,Quality level,Revenue-sharing contract} -} - -@techreport{RFFLabs2017, - title = {Livre Blanc {$\cdot$} {{Panorama}} Des {{Fablabs}} En {{France}}, 2017-18 {{Livre}} Blanc}, - author = {{RFFLabs}}, - year = {2017}, - pages = {2017--2035}, - urldate = {2022-02-25}, - file = {/Users/fabio/Zotero/storage/72TI6X7M/full-text.pdf} -} - -@article{rheinConsumersAwarenessPlastic2020, - title = {Consumers' Awareness of Plastic Packaging: {{More}} than Just Environmental Concerns}, - author = {Rhein, Sebastian and Schmid, Marc}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105063}, - publisher = {{Elsevier BV}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105063}, - urldate = {2020-08-09} -} - -@article{Rhodes2018, - title = {Plastic {{Pollution}} and {{Potential Solutions}}}, - author = {Rhodes, Christopher J.}, - year = {2018}, - journal = {Science Progress}, - volume = {101}, - number = {3}, - pages = {207--260}, - issn = {0036-8504}, - doi = {10.3184/003685018x15294876706211}, - abstract = {ABS ONLY}, - file = {/Users/fabio/Zotero/storage/YVE6GJ7X/Plastic Pollution and Potential Solutions.pdf} -} - -@incollection{riasDesignAdditiveManufacturing2017, - title = {Design for Additive Manufacturing: {{Supporting}} Intrinsic-Motivated Creativity}, - booktitle = {Emotional {{Engineering}}, {{Vol}}.5}, - author = {Rias, Anne Lise and Bouchard, Carole and Segonds, Fr{\'e}d{\'e}ric and Vayre, Benjamin and Abed, St{\'e}phane}, - year = {2017}, - month = jan, - pages = {99--115}, - publisher = {{Springer International Publishing}}, - doi = {10.1007/978-3-319-53195-3_8}, - urldate = {2021-01-12}, - abstract = {Emotional aspects and designers' motivations in Design For Additive Manufacturing are rarely studied. Still, as they can influence creative behaviors, it is worth of interest to draw some bases for a relation between designers' motivations and the field of Additive Manufacturing. This paper aims at identifying the motivations that push designers to deal with AM in their practice. We have highlighted that they experience some extrinsic motivations: Technical improvements, economics and social environments pressures. We also noticed that creative designers, apart from AM, usually experience some intrinsic motivations and, moreover, that it exists an ideal state to generate creative concepts: the Flow. To support creative designers in DFAM in reaching the Flow, we then identified 4 key levers through the potential of AM: the newness of AM processes, the needed skill of 3D modelling, the investigation of new shape grammars and finally the opportunity of embodying concepts into physical objects. To benefit from this potential, we assume that designers' intrinsic motivations should be supported: we identified three required conditions. The first one is the use of a proper vocabulary i.e. the expression Additive Manufacturing instead of 3D Printing. The second one is the development of a design process which integrates a creative approach. The third condition is the use of AM objects as experience triggers during creative sessions to arise positive emotions.}, - isbn = {978-3-319-53195-3} -} - -@article{RibeiroSiman2020, - title = {Governance Tools: {{Improving}} the Circular Economy through the Promotion of the Economic Sustainability of Waste Picker Organizations}, - author = {Ribeiro Siman, Renato and Yamane, Luciana Harue and {de Lima Baldam}, Roquemar and Pardinho Tackla, Juliana and {de Assis Lessa}, Sarina Francisca and {Mendon{\c c}a de Britto}, Priscila}, - year = {2020}, - month = mar, - journal = {Waste Management}, - volume = {105}, - pages = {148--169}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.01.040} -} - -@article{Richez-Battesti2012, - title = {L'innovation Sociale, Une Notion Aux Usages Pluriels: {{Quels}} Enjeux et D\'efis Pour {{L}}'analyse ?}, - author = {{Richez-Battesti}, Nadine and Petrella, Francesca and Vallade, Delphine}, - year = {2012}, - journal = {Innovations}, - volume = {38}, - number = {2}, - pages = {15--36}, - issn = {12674982}, - doi = {10.3917/inno.038.0015} -} - -@article{richterLessMoreHow2021, - title = {Less Is {{More}}: {{How Degrowth}} Will {{Save}} the {{World}}, {{Jason Hickel}}, {{William Heinemann}} (2020)}, - author = {Richter, Katharina}, - year = {2021}, - month = nov, - journal = {Ecological Economics}, - volume = {189}, - pages = {107160}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107160}, - urldate = {2021-08-21} -} - -@article{richterTakingStockRepair, - title = {Taking Stock for Repair and Refurbishing: {{A}} Review of Harvesting of Spare Parts from Electrical and Electronic Products}, - shorttitle = {Taking Stock for Repair and Refurbishing}, - author = {Richter, Jessika Luth and {Svensson-Hoglund}, Sahra and Dalhammar, Carl and Russell, Jennifer D. and Thidell, {\AA}ke}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13315}, - urldate = {2022-08-16}, - abstract = {A circular economy (CE) calls for the value of materials and products to be maintained and recovered through narrowing, closing, and slowing loops. However, there remain challenges in capturing value through reuse of components in refurbished and repaired products. In this paper, we provide an overview of the research and practice of harvesting spare parts from used and waste electrical and electronic equipment (white goods and consumer electronic products). Through a literature review and case studies of Norway, Sweden, and California, we provide an overview of drivers and barriers for spare part harvesting. Applying a stakeholder value mapping framework, we identify the key stakeholders involved in spare part harvesting and map the values captured, missed, and destroyed to identify opportunities for increased value retention. Finally, we suggest further refinements for policy to upscale spare part harvesting in light of CE goals and objectives.}, - copyright = {\textcopyright{} 2022 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of International Society for Industrial Ecology.}, - langid = {english}, - keywords = {circular economy,industrial ecology,parts reuse,spare parts,stakeholder value mapping,waste electrical and electronic equipment}, - file = {/Users/fabio/Zotero/storage/4KC9EF7W/Richter et al. - Taking stock for repair and refurbishing A review.pdf;/Users/fabio/Zotero/storage/G5EGA4CI/jiec.html} -} - -@article{Riffat2016, - title = {Future Cities and Environmental Sustainability}, - author = {Riffat, Saffa and Powell, Richard and Aydin, Devrim}, - year = {2016}, - journal = {Future Cities and Environment}, - volume = {2}, - number = {1}, - pages = {1}, - publisher = {{Future Cities and Environment}}, - issn = {2363-9075}, - doi = {10.1186/s40984-016-0014-2}, - abstract = {Massive growth is threatening the sustainability of cities and the quality of city life. Mass urbanisation can lead to social instability, undermining the capacity of cities to be environmentally sustainable and economically successful. A new model of sustainability is needed, including greater incentives to save energy, reduce consumption and protect the environment while also increasing levels of citizen wellbeing. Cities of the future should be a socially diverse environment where economic and social activities overlap and where communities are focused around neighbourhoods. They must be developed or adapted to enable their citizens to be socioeconomically creative and productive. Recent developments provide hope that such challenges can be tackled. This review describes the exciting innovations already being introduced in cities as well as those which could become reality in the near future.}, - isbn = {2363-9075}, - keywords = {environment,future cities,{Future cities,Sustainability,Urbanisation,Environm},innovations,sustainability,urbanisation}, - file = {/Users/fabio/Zotero/storage/AYTW44QU/Future cities and environmental sustainability.pdf} -} - -@article{rijalConvenientMethodDetermine2021, - title = {A Convenient Method to Determine Recycling Boundary for Low-Value Materials in Household Waste: {{A}} Case Study of Compostable Food Waste in {{Taichung City}}}, - author = {Rijal, Sandhya and Lin, Hung-Yueh}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124349}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124349}, - urldate = {2020-10-05} -} - -@article{rilligMicroplasticDisguisingSoil2018, - title = {Microplastic {{Disguising As Soil Carbon Storage}}}, - author = {Rillig, Matthias C.}, - year = {2018}, - month = jun, - journal = {Environmental Science \& Technology}, - volume = {52}, - number = {11}, - pages = {6079--6080}, - publisher = {{American Chemical Society}}, - issn = {0013-936X}, - doi = {10.1021/acs.est.8b02338}, - urldate = {2023-05-12}, - file = {/Users/fabio/Zotero/storage/2H5IEW5R/Rillig - 2018 - Microplastic Disguising As Soil Carbon Storage.pdf;/Users/fabio/Zotero/storage/UB8PVJ38/acs.est.html} -} - -@article{rilligMicroplasticEffectsCarbon2021, - title = {Microplastic Effects on Carbon Cycling Processes in Soils}, - author = {Rillig, Matthias C. and Leifheit, Eva and Lehmann, Johannes}, - year = {2021}, - month = mar, - journal = {PLOS Biology}, - volume = {19}, - number = {3}, - pages = {e3001130}, - publisher = {{Public Library of Science}}, - issn = {1545-7885}, - doi = {10.1371/journal.pbio.3001130}, - urldate = {2023-05-13}, - abstract = {Microplastics (MPs), plastic particles {$<$}5 mm, are found in environments, including terrestrial ecosystems, planetwide. Most research so far has focused on ecotoxicology, examining effects on performance of soil biota in controlled settings. As research pivots to a more ecosystem and global change perspective, questions about soil-borne biogeochemical cycles become important. MPs can affect the carbon cycle in numerous ways, for example, by being carbon themselves and by influencing soil microbial processes, plant growth, or litter decomposition. Great uncertainty surrounds nano-sized plastic particles, an expected by-product of further fragmentation of MPs. A major concerted effort is required to understand the pervasive effects of MPs on the functioning of soils and terrestrial ecosystems; importantly, such research needs to capture the immense diversity of these particles in terms of chemistry, aging, size, and shape.}, - langid = {english}, - keywords = {Biota,Earthworms,Ecosystem functioning,Ecosystems,Plant growth and development,Plastics,Priming (psychology),Soil chemistry}, - file = {/Users/fabio/Zotero/storage/IH9MIXUV/Rillig et al. - 2021 - Microplastic effects on carbon cycling processes i.pdf} -} - -@article{ritalaOrchestratingKnowledgeNetworks2022, - title = {Orchestrating {{Knowledge Networks}}: {{Alter-Oriented Brokering}}}, - shorttitle = {Orchestrating {{Knowledge Networks}}}, - author = {Ritala, Paavo and De Kort, Charlotte and Gailly, Benoit}, - year = {2022}, - month = mar, - journal = {Journal of Management}, - pages = {01492063221086247}, - publisher = {{SAGE Publications Inc}}, - issn = {0149-2063}, - doi = {10.1177/01492063221086247}, - urldate = {2022-10-05}, - abstract = {In knowledge networks, such as best-practice networks, industry forums, and professional communities, members of different organizations exchange knowledge for mutual and individual benefit. When properly managed, knowledge networks enable time- and resource-constrained individuals to engage across organizational and industry boundaries. Such networks often involve deliberate orchestration by a hub actor (individual, team, or organization), often referred to as the orchestrator. Orchestration in a network of individuals is essentially a form of brokering behavior. While most previous studies of orchestration and brokerage have adopted a broker-centric perspective, the present study advances an alter-oriented account of how brokering behavior influences relationships to create knowledge-related benefits for individual network members. Drawing on interviews with 51 members of a Belgian knowledge network focusing on best practices in research and development, this study explores the orchestrator's brokering behavior and ensuing benefits for network members. Based on these findings, the study describes an integrative model of alter-oriented brokering processes that modify, intermediate, and maintain relationships among alters in orchestrated knowledge networks. The study contributes by conceptualizing alter-orientation as a distinct brokering behavior, by unpacking the microfoundations of brokering in knowledge network orchestration, and by demonstrating the dynamics between knowledge and social dimensions of knowledge network orchestration.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/MB9B7JMI/Ritala et al_2022_Orchestrating Knowledge Networks.pdf} -} - -@article{Ritter2019, - title = {The Sharing Economy: {{A}} Comprehensive Business Model Framework}, - author = {Ritter, M. and Schanz, H.}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {213}, - pages = {320--331}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.154}, - urldate = {2020-03-21}, - abstract = {The sharing economy is seen as an important building block for transitions to sustainability. Although the sharing economy concept is widely used, comprehension varies about what makes a sharing economy business model. This study aims to review and categorize the field of sharing economy business model research, by reviewing the fundamentals of the concept of sharing and feeding them back into the business model literature. A comprehensive framework of business model categories is proposed, distinguishing four market segments of the sharing economy: Singular Transaction Models, Subscription-Based Models, Commission-Based Platforms and Unlimited Platforms. The study's framework is grounded in an analysis of sharing economy fundamentals and business model literature, contributing to a better understanding of the potentials of sharing economy for sustainability transitions and the implementation of business model innovations.}, - keywords = {Business model,Business model innovation,Sharing economy,Value capture,Value creation,Value proposition} -} - -@article{Ritzen2017, - ids = {ritzen2017}, - title = {Barriers to the {{Circular Economy}} - {{Integration}} of {{Perspectives}} and {{Domains}}}, - author = {Ritz{\'e}n, Sofia and Sandstr{\"o}m, Gunilla {\"O}lundh}, - year = {2017}, - journal = {Procedia CIRP}, - volume = {64}, - pages = {7--12}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2017.03.005}, - abstract = {Sustainable development requires disruptive changes and radical innovations, and the capability to deliver this in relation to adapt to a sustainable development is needed in mature large industrial companies. Integration between sustainability and business development is needed, which the Circular Economy model offers. Circular Economy is little implemented in practice, and in the present paper barriers to a transition to Circular Economy is identified. Barriers are financial, structural, operational, attitudinal and technological. They are also, as analyzed in relation to innovation management, characterized by a need to increase integration between a number of different perspectives and domains in industry.}, - isbn = {22128271 (ISSN)}, - keywords = {Circular Economy,disruptive,innovation management,integration,radical}, - file = {/Users/fabio/Zotero/storage/XLPSMICB/Barriers to the Circular Economy - Integration of Perspectives and Domains.pdf} -} - -@article{rivasEUGreenDeal2021, - title = {Towards the {{EU Green Deal}}: {{Local}} Key Factors to Achieve Ambitious 2030 Climate Targets}, - author = {Rivas, Silvia and Urraca, Ruben and Bertoldi, Paolo and Thiel, Christian}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {320}, - pages = {128878}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128878}, - urldate = {2021-09-15} -} - -@book{Rizos2017, - title = {{{RR2017-08}}\_{{CircularEconomy}}\_0}, - author = {Rizos, Vasileios and Tuokko, Katja and Behrens, Arno}, - year = {2017}, - isbn = {978-94-6138-597-0}, - file = {/Users/fabio/Zotero/storage/JBGXBXLN/The Circular Economy- A review of definitions, processes and impacts.pdf} -} - -@article{Rizzi2020, - title = {How to Meet Reuse and Preparation for Reuse Targets? {{Shape}} Advertising Strategies but Be Aware of ``Social Washing''}, - author = {Rizzi, Francesco and Gusmerotti, Natalia and Frey, Marco}, - year = {2020}, - month = jan, - journal = {Waste Management}, - volume = {101}, - pages = {291--300}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.10.024} -} - -@article{Roach2019, - title = {The M4 {{3D Printer}}: {{A}} Multi-Material Multi-Method Additive Manufacturing Platform for Future {{3D}} Printed Structures}, - author = {Roach, Devin J. and Hamel, Craig M. and Dunn, Conner K. and Johnson, Marshall V. and Kuang, Xiao and Qi, H. Jerry}, - year = {2019}, - month = aug, - journal = {Additive Manufacturing}, - pages = {100819}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100819} -} - -@techreport{Roadmap2009, - title = {Identifying the {{Future}} of {{Freeform Processing}} 2009}, - author = {Bourell, David L. and Leu, Ming C. and Rose, David W.}, - year = {2009}, - pages = {102}, - address = {{Austin, Texas, USA}}, - institution = {{The University of Texas at Austin}}, - file = {/Users/fabio/Zotero/storage/2JE4UJWN/Identifying the Future of Freeform Processing 2009.pdf} -} - -@article{Roberson2013, - title = {{{3D}} Printer Selection: {{A}} Decision-Making Evaluation and Ranking Model}, - author = {Roberson, D.a. and Espalin, D. and Wicker, R.B.}, - year = {2013}, - month = sep, - journal = {Virtual and Physical Prototyping}, - volume = {8}, - number = {3}, - pages = {201--212}, - publisher = {{Taylor \& Francis}}, - issn = {1745-2759}, - doi = {10.1080/17452759.2013.830939}, - urldate = {2013-12-07}, - abstract = {The purpose of this paper is to evaluate the capability of five desktop additive manufacturing (AM) machines based on the ability to produce a standard component. This work also developed a model/method for evaluating and ranking AM technologies based on select criteria that can facilitate purchasing decisions. A standard part was designed and printed on each machine, and evaluated based on dimensional accuracy and surface finish. Additionally, the machines were compared based on build time for single and multiple parts as well as material consumption and unit cost. The research highlights the differences between AM units and suggests a method by which to ascertain the differences. With the rapid proliferation of desktop additive manufacturing units, a quantitative ranking system was developed to rate the units so a comparison can be made. Although the focus of the work was on desktop systems, the approach can be applied across all AM technologies.}, - keywords = {additive manufacturing,desktop 3D printer,material extrusion,sheet lamination,vat photopolymerisation}, - file = {/Users/fabio/Zotero/storage/L2WUJUEI/3D printer selection A decision-making evaluation and ranking model.pdf} -} - -@unpublished{Roberts1980, - title = {Critical Functions: {{Needed}} Roles in the Innovation Process}, - author = {Roberts, Edward B. and Fusfeld, Alan R.}, - year = {1980}, - month = may, - pages = {1--40}, - publisher = {{Massachusetts Institute of Technology}}, - address = {{Cambrigde}} -} - -@article{Robertson2020, - title = {Shear Processing Maps: A New Design Guide for Melt Processors}, - author = {Robertson, Ben and Robinson, Ian M and Stocks, D and Thompson, Richard L}, - year = {2020}, - journal = {Plastics, Rubber and Composites}, - issn = {17432898}, - doi = {10.1080/14658011.2020.1796082}, - urldate = {2021-04-12}, - abstract = {A method for predicting the optimal conditions for polymer extrusion, which relies only on gramscale laboratory experiments for two commercial polystyrene samples with two molecular weights is demonstrated by oscillatory rheology. These enable a shear viscosity map vs. temperature and shear rate to be constructed, together with the positions for the major molecular timescales. Alternative methods for characterising rheology, including melt flow index and capillary rheology measurements were also employed, but these do not give the same level of understanding of flow behaviour. The capillary tests generates die swell and this complex behaviour can be seen to collapse onto a single line regardless of temperature when plotted using the Rouse\textendash Weissenberg number. The full shear viscosity map, together with the polymer timescales serves as a design tool to predict processing behaviour for melt processors. The work represents and builds on major academic-industry collaborative research programmes.}, - keywords = {capillary rheology,die swell,melt flow index,molecular timescales,Polystyrene,Rouse\textendash Weissenberg number,shear viscosity map,torsional rheology}, - file = {/Users/fabio/Zotero/storage/U3KCM8TH/full-text.pdf} -} - -@article{robertsPersonalityPsychology2022, - title = {Personality {{Psychology}}}, - author = {Roberts, Brent W. and Yoon, Hee J.}, - year = {2022}, - month = jan, - journal = {https://doi.org/10.1146/annurev-psych-020821-114927}, - volume = {73}, - number = {1}, - pages = {489--516}, - publisher = {{Annual Reviews}}, - issn = {0066-4308}, - doi = {10.1146/ANNUREV-PSYCH-020821-114927}, - urldate = {2022-01-25}, - abstract = {Personality psychology, which seeks to study individual differences in thoughts, feelings, and behaviors that persist over time and place, has experienced a renaissance in the last few decades. It ...}, - keywords = {motivation,narrative identity,personality,personality development,personality traits,skills} -} - -@article{Robin2012, - title = {Recyclage Des Thermoplastiques}, - author = {Robin, Jean-Jacques}, - year = {2012}, - journal = {Techniques de l'ing\'enieur}, - volume = {AM 3 832}, - number = {0}, - pages = {1--16}, - isbn = {7200031372}, - file = {/Users/fabio/Zotero/storage/GRTDVQZ6/Robin - 2012 - Recyclage des thermoplastiques.pdf} -} - -@article{Robina-Ramirez2020, - title = {What Role Do Emotions Play in Transforming Students' Environmental Behaviour at School?}, - author = {{Robina-Ram{\'i}rez}, Rafael and Medina Merodio, Jos{\'e} Amelio and McCallum, Stephen}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {258}, - pages = {120638}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120638} -} - -@article{Robinson2005, - title = {Recycling Behaviour in a {{London Borough}}: {{Results}} from Large-Scale Household Surveys}, - author = {Robinson, Guy M. and Read, Adam D.}, - year = {2005}, - journal = {Resources, Conservation and Recycling}, - volume = {45}, - number = {1}, - pages = {70--83}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2005.02.002}, - abstract = {This paper summarises the results of two large-scale surveys of households in the Royal Borough of Kensington and Chelsea in Greater London. The first, performed in 2000, covered 7500 households and the second, in 2004, 3250 households. Respondents provided information on their use of the local authority's kerbside recycling scheme and 'bring' sites for recycled materials. In 2000, approximately half of the householders surveyed via face-to-face interviews claimed that they used the kerbside scheme and/or bring sites on a regular basis. This proportion had grown to 70\% in 2004. Details of this usage are outlined, including consideration of stated reasons for non-participation in waste recycling activities and reasons for variation in recycling behaviour across the borough. The context for this research is the establishment of national and local authority targets for the amount of household waste to be recycled. Given widespread concern that these targets are not being met, the research project not only evaluated the effectiveness of the existing opportunities for householders in Kensington and Chelsea but also promoted participation in recycling. One effect of this promotion was an observable increase in the amount of waste for recycling following both surveys. A key conclusion is that large-scale house-to-house publicity of local recycling opportunities has a demonstrable positive effect, but that for current targets to be met more householders need to be convinced of the need to recycle. \textcopyright{} 2005 Elsevier B.V. All rights reserved.}, - isbn = {09213449}, - keywords = {Bring sites,Household surveys,Household waste recycling,Kerbside waste collection,London}, - file = {/Users/fabio/Zotero/storage/A8CQNZRH/Recycling behaviour in a London Borough Results from large-scale household surveys.pdf} -} - -@article{robinsonPolicyLensingFutureoriented2021, - title = {Policy Lensing of Future-Oriented Strategic Intelligence: {{An}} Experiment Connecting Foresight with Decision Making Contexts}, - author = {Robinson, Douglas K.R. and Schoen, Antoine and Lar{\'e}do, Philippe and Gallart, Jordi Molas and Warnke, Philine and Kuhlmann, Stefan and {Ord{\'o}{\~n}ez-Matamoros}, Gonzalo}, - year = {2021}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {169}, - pages = {120803}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120803}, - urldate = {2021-06-08} -} - -@article{robraCreativeDestructionConvivial2023, - title = {From Creative Destruction to Convivial Innovation - {{A}} Post-Growth Perspective}, - author = {Robra, Ben and Pazaitis, Alex and Giotitsas, Chris and Pansera, Mario}, - year = {2023}, - month = jul, - journal = {Technovation}, - volume = {125}, - pages = {102760}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2023.102760}, - urldate = {2023-05-02}, - abstract = {In this paper, we argue that the notion of Creative Destruction underpinning classical innovation management theory as well as having crystallised into technological determinism and productivism has come to a dead-end. Framing innovation's ultimate goal as the endless pursuit of economic growth is unrealistic if we wish to address pressing environmental challenges. We show that Creative Destruction historically emerged as an ideology from a specific set of values and worldviews at the cradle of Western capitalism and its need for valorisations. Capital valorisation imposes its logic on innovation, definition of needs, consumption, and organisation of work. The mantra of `innovate or die' and its underpinning values represent a hegemonic view on technology aligned with the capitalist mode of production. We argue that a counter-hegemonic view emphasising conviviality and use-value is possible instead and needed to address the environmental and social challenges of our time. We posit that the (re-)emerging mode of production, commons-based peer production (CBPP) has such potential. Indicative cases show that innovation underlined by counter-hegemonic values already exists, albeit in the cracks of the dominant system and in constant danger of co-optation. Governmental institutions need to support these alternative practices of innovation.}, - langid = {english}, - keywords = {Commons,Convivial technology,Counter-hegemony,Creative destruction,Innovation,Peer production,Post-growth,Responsible innovation}, - file = {/Users/fabio/Zotero/storage/P5Y936YR/Robra et al_2023_From creative destruction to convivial innovation - A post-growth perspective.pdf;/Users/fabio/Zotero/storage/4BBE5ABZ/S0166497223000718.html} -} - -@article{Roca-Puig2019, - title = {The Circular Path of Social Sustainability: {{An}} Empirical Analysis}, - author = {{Roca-Puig}, Vicente}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {916--924}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.078}, - abstract = {The sustainable human resource management literature provides arguments linking the social sustainability dimensions of business and society, suggesting a circular or two-way relationship between them. The norm of reciprocity builds social sustainability by increasing trust and cooperation in any group of people and explains this complex relationship. In this study, we test the connection between society\textendash\textendash poverty and inequality\textendash\textendash and business\textendash\textendash human resource investment strategy\textendash\textendash using a large longitudinal data set with six time points. Findings showed that past poverty negatively contributes to a later human resource investment strategy and vice versa. This mutual relationship configures a positive feedback loop where environmental social sustainability and organizational social sustainability enhance each other. Results also show that a human resource investment strategy negatively affects income inequality, revealing that corporate decisions on social sustainability can affect social sustainability in society.} -} - -@article{Rocha2019, - ids = {SousaRocha2019}, - title = {Design for Sustainability Models: {{A}} Multiperspective Review}, - author = {Rocha, Cristina Sousa and Antunes, P. and Partid{\'a}rio, P.}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {234}, - pages = {1428--1445}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.108}, - urldate = {2020-05-21}, - abstract = {Several authors have identified limitations in the uptake of design for sustainability (DfS) in companies and value chains. In spite of the extensive literature on the subject, researchers and practitioners still do not share a common overview on the subject, which hinders operationalization efforts. This paper proposes that DfS adoption is more likely to be successful if informed by corporate sustainability management and design management theories. Therefore, an analytical framework has been developed and applied to systematically analyse ten published design for sustainability models, which were identified through an extensive literature review. The analytical framework is composed of nine building blocks, or elements, organized in three levels: strategic, tactical and operational. To facilitate a more detailed and objective analysis of the selected models against each element, 22 questions have been established. The findings show that while some authors have focused on abstract models that support companies in establishing a vision and concepts for (more) sustainable products and services, others offer more instrumental approaches to guide the different phases of design. On the level of the building blocks, there is a considerable alignment of the models with the analytical framework; the detailed mechanisms and processes for implementation, however, vary a lot. Overall, difficulties related to developing a sustainability vision that guides the design for sustainability process, co-creating with stakeholders and harmonizing environmental, social and economic criteria were identified. The social dimension of design for sustainability is still poorly established and tackled in a multi-level, non-systemized way. The paper concludes with promising research directions focusing on design for sustainability.}, - keywords = {Corporate sustainability management,Design for sustainability,Design management,DfS models,Social responsibility}, - file = {/Users/fabio/Zotero/storage/BN9VQZ37/Sousa Rocha, Antunes, Partid Ario - 2019 - Design for sustainability models A multiperspective review.pdf} -} - -@article{Rockstrom2009, - title = {A Safe Operating Space for Humanity}, - author = {Rockstr{\"o}m, Johan and Steffen, Will and Noone, Kevin and Persson, {\AA}sa and Chapin, F. Stuart and Lambin, Eric F. and Lenton, Timothy M. and Scheffer, Marten and Folke, Carl and Schellnhuber, Hans Joachim and Nykvist, Bj{\"o}rn and De Wit, Cynthia A. and Hughes, Terry and Van Der Leeuw, Sander and Rodhe, Henning and S{\"o}rlin, Sverker and Snyder, Peter K. and Costanza, Robert and Svedin, Uno and Falkenmark, Malin and Karlberg, Louise and Corell, Robert W. and Fabry, Victoria J. and Hansen, James and Walker, Brian and Liverman, Diana and Richardson, Katherine and Crutzen, Paul and Foley, Jonathan A.}, - year = {2009}, - month = sep, - journal = {Nature}, - volume = {461}, - number = {7263}, - pages = {472--475}, - issn = {00280836}, - doi = {10.1038/461472a}, - urldate = {2020-05-27}, - pmid = {19779433}, - file = {/Users/fabio/Zotero/storage/3JS3QNMU/full-text.pdf} -} - -@article{rodeInfluencingClimateChange2021, - title = {Influencing Climate Change Attitudes in the {{United States}}: {{A}} Systematic Review and Meta-Analysis}, - author = {Rode, Jacob B. and Dent, Amy L. and Benedict, Caitlin N. and Brosnahan, Daniel B. and Martinez, Ramona L. and Ditto, Peter H.}, - year = {2021}, - month = aug, - journal = {Journal of Environmental Psychology}, - volume = {76}, - pages = {101623}, - publisher = {{Elsevier BV}}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2021.101623}, - urldate = {2021-06-07}, - abstract = {Researchers interested in climate change communication have investigated how people respond to messages about it. Through meta-analysis, the current research synthesizes the multitude of experimental studies on this topic to uncover which interventions are most effective at influencing attitudes about climate change. The meta-analysis focuses on experimental studies that included a control condition and measured climate change attitudes among participants in the United States. After a large literature search, 396 effect sizes were retrieved from 76 independent experiments (N = 76,054 participants). Intervention had a small, significant positive effect on attitudes, g = 0.08, 95\% CI [0.06, 0.10], p {$<$} .001. Surprisingly, type of intervention was not a statistically significant moderator of this effect, nor was political affiliation. However, type of attitude was a significant moderator: the treatment-control difference in attitudes was smaller for policy support than for belief in climate change, indicating that policy attitudes are more resistant to influence than belief in climate change. Other moderators and publication bias were also tested. We conclude with policy implications and recommendations for future research.}, - file = {/Users/fabio/Zotero/storage/JBUPZWZQ/full-text.pdf} -} - -@article{roderExanteLifeCycle2022, - title = {Ex-Ante Life Cycle Assessment and Scale up: {{A}} Protein Production Case Study}, - shorttitle = {Ex-Ante Life Cycle Assessment and Scale Up}, - author = {R{\"o}der, Hubert and Kumar, Karthik and F{\"u}chsl, Stefan and Sieber, Volker}, - year = {2022}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {376}, - pages = {134329}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.134329}, - urldate = {2022-11-10}, - abstract = {Life cycle assessment (LCA) is a well-known tool that has been able to provide insights into the environmental impact and hotspots of systems and technologies that are established in the market. Nevertheless, both for emerging processes that are only available at laboratory or pilot scale and when more future oriented in its perspective, the application of LCA becomes more complex and difficult. There is as of yet no consensus in the literature on how to conduct ex-ante LCA and many challenges discussed in the literature have yet to be cleared. This paper aims to highlight the implementation of ex-ante LCA with a specific focus on upscaling processes from laboratory to industrial scale. A new production process of proteins obtained from rapeseed cake serves as a case study to illustrate both the challenges encountered as well as the value and necessity of future oriented LCA, LCC and scaleup. The challenges found in this work include data availability, unknown final uses and functions, complexity of upscaling, and uncertainty. The results show a strong difference between laboratory scale and industrial scale costs and impacts, which are when upscaled lower compared to the impact of other protein sources, thus uncovering the environmental benefits of protein obtained from rapeseed cake.}, - langid = {english}, - keywords = {Case study,Ex-ante LCA,Life cycle assessment,Proteins,Scale-up} -} - -@article{Rodgers2020, - title = {{{DIY Entrepreneurship}}: A Decision-Pathway Framework for Ethical Thought Structures}, - author = {Rodgers, Waymond and Al Shammakhi, Badriya N. and Jeaneth, Johansson and Wincent, Joakim and Adams, Kweku}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120290}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120290}, - urldate = {2020-09-29}, - abstract = {This conceptual paper provides a decision-making framework that enhances our understanding of how Do-It-Yourself (DIY) laboratory entrepreneurs execute ethical standards by dismissing fraud. Although our theory assumes that most DIY entrepreneurs are by nature `ethical', we discuss how the unique nature of DIY laboratory entrepreneurship provides risks for fraud. Drawing on three ethical theoretical lenses, utilitarianism, deontology and egoism, our paper proposes different potential causes of fraud and motivates further analysis about why DIY laboratory entrepreneurship is an important context for the study of fraud. We contribute to theory and government policy by providing a conceptual framework that explains how entrepreneurial choices lead to three main types of fraud based on the dominant decision pathways. Further research and practical implications are discussed.}, - keywords = {Cognition,Decision-making,Entrepreneurship,Ethics,Fraud} -} - -@article{Rodl2022, - title = {From Responsible to Responsive Innovation: {{A}} Systemic and Historically Sensitive Approach to Innovation Processes}, - author = {R{\"o}dl, Malte B. and Boons, Frank and Spekkink, Wouter}, - year = {2022}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {174}, - pages = {121231}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.121231}, - urldate = {2021-10-18}, - abstract = {Responsible innovation has emerged as a field of research dedicated to introduce sensitivity to societal values in innovation processes. However, much of the academic literature on RI deals with single technologies instead of technological systems and is future-orientated without explicitly using specialised knowledge of past developments. In this paper, we present a problem-focused approach to RI that aims to support researchers and stakeholders in developing potential solutions from a perspective of systemic awareness and historical sensitivity. We then describe the application of this approach in an 18 months long interdisciplinary research project on plastics. We show that the approach has generated new and unexpected research projects, formed new inter- and transdisciplinary collaborations, and has impacted some participants' understanding of the systems in which their work is embedded. We conclude that with appropriate willingness to engage by individual researchers, our approach is able to, firstly, influence highly experienced researchers to engage more responsibly with their work, and secondly, to make research projects responsive by including societal concerns and their historical emergence from the start.}, - keywords = {Co-production,Event graphs,Historical sensitivity,Learning Histories,Plastics,Responsible innovation,Systems thinking}, - file = {/Users/fabio/Zotero/storage/56P8U66N/full-text.pdf} -} - -@article{rodlPerformingCircularEconomy2022, - ids = {rodl2022a}, - title = {Performing the {{Circular}} Economy: {{How}} an Ambiguous Discourse Is Managed and Maintained through Meetings}, - author = {R{\"o}dl, Malte B. and {\AA}hlvik, Therese and Berge{\aa}, Hanna and Hallgren, Lars and B{\"o}hm, Steffen}, - year = {2022}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {360}, - pages = {132144}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.132144}, - urldate = {2022-05-30} -} - -@article{rodrigoWhatAntecedentAttitudes2021, - title = {What Antecedent Attitudes Motivate Actors to Commit to the Ecosystem of Digital Social Innovation?}, - author = {Rodrigo, L. and Palacios, M.}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120394}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120394}, - urldate = {2020-10-28}, - abstract = {\textcopyright{} 2020 Elsevier Inc. The purpose of this article is to identify those antecedent factors affecting the commitment among professionals and managers of projects and initiatives that are part of the ecosystem of Digital Social Innovation (DSI) in Spain. These factors are related to the commitment experienced towards their job, as well as to their commitment to the cause or social goal pursued by the project or organization. The study of the literature allows the development of an iterative theoretical framework that measures the most relevant variables that affect the attitude of these actors. Finally, a qualitative comparative analysis (QCA) is carried out to test a new model looking for those antecedent attitudes that become core conditions to the success of organizational commitment. What emerges from the research is that the presence of antecedent factors that belong to the cognitive dimension leads to a high level of commitment, while the absence of some factors from the affective dimension, together with high levels of anxiety, lead to a lack of commitment.}, - keywords = {Digital social innovation,Motivation,Organizational commitment,Quality of working life attitudes,Social change}, - file = {/Users/fabio/Zotero/storage/24QAANHE/full-text.pdf} -} - -@article{Rodrigues2019, - title = {Business Cases for Ecodesign Implementation: A Simulation-Based Framework}, - author = {Rodrigues, Vin{\'i}cius P. and Pigosso, Daniela C.A. and McAloone, Tim C.}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {234}, - pages = {1045--1058}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.289}, - urldate = {2020-05-21}, - abstract = {The lack of quantitative mechanisms aimed at evaluating the potential business benefits of ecodesign prior to implementation is a major barrier to wider adoption in manufacturing companies. Ecodesign is defined as the consistent integration of environmental aspects into product development processes. Within this frame, there is a need to understand how the development of ecodesign capabilities affect overall business performance over time. Drawing upon the Ecodesign Maturity Model (EcoM2) as the theoretical foundation, this paper systematically reviews the literature on (i) relevant applications of dynamic modelling and (ii) relationships between ecodesign management practices and key business performance outcomes, in order to develop a simulation-based approach aimed at deriving a business case framework for ecodesign implementation. The resulting framework originates the ``business case simulator'', which was subjected to the judgement and evaluation of six industry experts regarding its applicability and usefulness to manufacturing settings. The results are discussed and future research streams \textendash{} coupled with improvement opportunities to the business case simulator \textendash{} are pointed.}, - keywords = {Design for environment,Sustainability,Sustainable design,Sustainable product development,System dynamics} -} - -@article{Rodrigues2021, - title = {Application of the Absolute Environmental Sustainability Assessment Framework to Multifunctional Systems \textendash{} {{The}} Case of Municipal Solid Waste Management}, - author = {Rodrigues, J{\'e}r{\'e}my and Gondran, Natacha and Beziat, Adrien and Laforest, Val{\'e}rie}, - year = {2021}, - journal = {Journal of Cleaner Production}, - volume = {322}, - pages = {129034}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.129034}, - urldate = {2021-09-27}, - abstract = {The Absolute Environmental Sustainability Assessment (AESA) framework is an emerging field in environmental research that aims at comparing the estimated environmental burden generated by a system on its life cycle to the carrying capacity that can be assigned to this system, i.e. the amount of impacts that it can cause without causing unacceptable impairment of ecosystem functional integrity. This paper aims to expand the AESA framework to multifunctional systems. We applied it to a simplified case study based on municipal solid waste (MSW) management, since such a system provides several functions such as reduction of the quantity and toxicity of waste, production of heat, electricity or secondary materials. Thus, we could identify the specific questions that arise from this multifunctionality in the context of AESA. Based on the theory of AESA, we developed a four-steps methodology to identify the most significant impacts at both system and global scales. That methodology consisted of (step 1) quantifying the impacts of the studied system with conventional Life Cycle Assessment (LCA) followed by a normalisation step; (step 2) quantifying the number of beneficiaries from this system; (step 3) identifying impact categories for which the studied system causes significant impacts and global carrying capacities are exceeded; and (step 4) quantifying the Assigned Carrying Capacity (ACC) of the system, based on a utilitarian perspective and its contribution to the satisfaction of human needs. We then applied this methodology to a simplified model of the MSW management implemented in the Lyon Metropolitan Area (France), as a proof of concept. Steps 1 to 3 helped elaborate a hierarchy of impact categories, highlighting which ones should be reduced in priority. Step 4 required significant knowledge about how the functions of the studied system were used, both directly and indirectly, to satisfy human needs. We used national Supply and Use Tables and several simplifying hypotheses to that end. We also tested different sharing principles based on macroeconomic indicators. This variety of sharing principles helped refine the hierarchy developed in Step 3 by identifying which carrying capacities were most certainly exceeded by the studied system.}, - file = {/Users/fabio/Zotero/storage/N3XR9L3C/full-text.pdf} -} - -@article{Rodriguez-Hernandez2020, - title = {{{3D}} Printer Waste, a New Source of Nanoplastic Pollutants}, - author = {{Rodr{\'i}guez-Hern{\'a}ndez}, A. G. and Chiodoni, Angelica and Bocchini, Sergio and {Vazquez-Duhalt}, Rafael}, - year = {2020}, - month = dec, - journal = {Environmental Pollution}, - volume = {267}, - pages = {115609}, - publisher = {{Elsevier Ltd}}, - issn = {18736424}, - doi = {10.1016/j.envpol.2020.115609}, - urldate = {2021-02-19}, - abstract = {Identification and characterization of a new pollutant nanoplastics source from widely extended home 3D printer technology.}, - pmid = {33254724}, - keywords = {3D printer waste,Microplastics,Nanoplastics,Plastic pollution} -} - -@article{Rodriguez2000, - title = {Characterization of the Mesostructure of Fused-deposition Acrylonitrile-butadiene-styrene Materials}, - author = {Rodriguez, Jose F and Thomas, James P and Renaud, John E}, - year = {2000}, - month = sep, - journal = {Rapid Prototyping Journal}, - volume = {6}, - number = {3}, - pages = {175--186}, - issn = {1355-2546}, - doi = {10.1108/13552540010337056}, - file = {/Users/fabio/Zotero/storage/KF3NP5VB/Characterization of the mesostructure of fused-deposition acrylonitrile-butadiene-styrene materials.pdf} -} - -@article{Rodriguez2001, - title = {Mechanical Behavior of Acrylonitrile Butadiene Styrene ({{ABS}}) Fused Deposition Materials. {{Experimental}} Investigation}, - author = {Rodr{\'i}guez, Jos{\'e} F. and Thomas, James P and Renaud, John E}, - year = {2001}, - month = aug, - journal = {Rapid Prototyping Journal}, - volume = {7}, - number = {3}, - pages = {148--158}, - issn = {1355-2546}, - doi = {10.1108/13552540110395547}, - urldate = {2015-03-17}, - file = {/Users/fabio/Zotero/storage/CZ9CXV5L/Rodríguez, Thomas, Renaud - 2001 - Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimenta.pdf} -} - -@article{Rodriguez2003, - title = {Mechanical Behavior of Acrylonitrile Butadiene Styrene Fused Deposition Materials Modeling}, - author = {Rodr{\'i}guez, Jos{\'e} F. and Thomas, James P. and Renaud, John E.}, - year = {2003}, - month = oct, - journal = {Rapid Prototyping Journal}, - volume = {9}, - number = {4}, - pages = {219--230}, - issn = {1355-2546}, - doi = {10.1108/13552540310489604}, - urldate = {2015-02-10}, - file = {/Users/fabio/Zotero/storage/LJA5FTSR/Rodríguez, Thomas, Renaud - 2003 - Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling.pdf} -} - -@article{Rodriguez2003a, - title = {Design of {{Fused-Deposition ABS Components}} for {{Stiffness}} and {{Strength}}}, - author = {Rodriguez, Jos{\'e} F. and Thomas, James P. and Renaud, John E.}, - year = {2003}, - journal = {Journal of Mechanical Design}, - volume = {125}, - number = {3}, - pages = {545}, - issn = {10500472}, - doi = {10.1115/1.1582499}, - urldate = {2015-02-06}, - file = {/Users/fabio/Zotero/storage/ZNGPX64C/Rodrı́guez, Thomas, Renaud - 2003 - Design of Fused-Deposition ABS Components for Stiffness and Strength.pdf} -} - -@article{rodriguezbolivarIdentifyingPatternsSmart2023, - title = {Identifying Patterns in Smart Initiatives' Planning in Smart Cities. {{An}} Empirical Analysis in {{Spanish}} Smart Cities}, - author = {Rodr{\'i}guez Bol{\'i}var, Manuel Pedro and Alcaide Mu{\~n}oz, Laura and Alcaide Mu{\~n}oz, Cristina}, - year = {2023}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {196}, - pages = {122781}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2023.122781}, - urldate = {2023-08-31}, - abstract = {The smart city (SCs) movement has emerged to face urban challenges. Nonetheless, the complexity and dynamic nature of cities makes them context-dependent in their strategic planning processes concerning smart initiatives, which can lead to different solutions and outcomes of cities' development. With the growing number of smart initiatives implemented in SCs, it becomes important both to consider how such initiatives are planned and organised, and to address the complexity and context-dependent dynamic in which such initiatives are implemented. Therefore, this study is a comprehensive analysis of number of initiatives in 12 Spanish SCs (1635 smart initiatives) to identify the relations between key characteristics of the cities (cities and citizens' profiles) and the planning of SC strategies. Findings suggest that formal strategic planning is mainly performed in SCs with higher qualification of inhabitants, mature-aged population, and top-down strategic planning approach.}, - keywords = {Citizen profile,Demographic profile,Smart cities,Smart initiatives,Strategic planning}, - file = {/Users/fabio/Zotero/storage/ZWEJABWF/S0040162523004663.html} -} - -@article{rogersRepairingCircularEconomy2021, - title = {Repairing the Circular Economy: {{Public}} Perception and Participant Profile of the Repair Economy in {{Hull}}, {{UK}}}, - author = {Rogers, Heather A. and Deutz, Pauline and Ramos, Tom{\'a}s B.}, - year = {2021}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {168}, - pages = {105447}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105447}, - urldate = {2021-02-14}, - file = {/Users/fabio/Zotero/storage/F79C9AJJ/full-text.pdf} -} - -@article{roggaOpportunitiesBalancingActs2021, - title = {Opportunities, Balancing Acts, and Challenges - Doing {{PhDs}} in Transdisciplinary Research Projects}, - author = {Rogga, Sebastian and Zscheischler, Jana}, - year = {2021}, - month = jun, - journal = {Environmental Science and Policy}, - volume = {120}, - pages = {138--144}, - publisher = {{Elsevier Ltd}}, - issn = {18736416}, - doi = {10.1016/j.envsci.2021.03.009}, - urldate = {2021-04-20}, - abstract = {Doing a PhD in a transdisciplinary research (TDR) project allows early-career scientists (ECSs) to study innovative topics in socioecological systems and to apply methods involving the co-design and co-production of knowledge with practitioners. However, a series of interviews and a group discussion with ECSs involved in TDR projects revealed not only the benefits for career development but also a number of challenges and even risks related to working on such projects. We discuss the vital role of ECSs in sustainability science and the professionalization of TDR processes. To ensure fair conditions for these researchers, experienced supervisors who assume responsibility for ECSs in TDR projects are required, as is the acknowledgement of the twofold efforts of ECSs in TDR projects and support from scientific networks (e.g., Future Earth) to transform the academic system and build the careers of ECSs in sustainability science. Finally, it has been shown that the scientific discourse on TDR and sustainability science must pay more attention to the specific roles of ECSs and work conditions.}, - keywords = {Co-production of knowledge,Early-career researchers,Science system,Sustainability science}, - file = {/Users/fabio/Zotero/storage/PFRMM9FM/full-text.pdf} -} - -@article{roggemaIncrementalChangeTransition2012, - title = {Incremental Change, Transition or Transformation? {{Optimising}} Change Pathways for Climate Adaptation in Spatial Planning}, - author = {Roggema, Rob and Vermeend, Tim and {van den Dobbelsteen}, Andy}, - year = {2012}, - journal = {Sustainability}, - volume = {4}, - number = {10}, - pages = {2525--2549}, - publisher = {{MDPI}}, - issn = {20711050}, - doi = {10.3390/SU4102525}, - urldate = {2022-03-13}, - abstract = {In order to incorporate climate adaptation in spatial planning change is required, because climate change impacts the way we live. This implies that spatial planning, as the arranger of the spatial organisation and layout needs to be able to support this change. Current spatial planning is not yet well equipped to play this role. In this research article three possible routes to navigate change are explored. Incremental change is seen as a slow process, which modifies the landscape only slightly. Transition is seen as a fluent change towards a new future, which is an improved version of the existing; and transformation is seen as a change towards a future that is fundamentally different from the existing. The three pathways are compared and it is concluded that transformational change offers the best perspective in dealing with uncertain, unexpected and unprecedented futures, such as developing in times of climate change. Therefore, transformation is theoretically further elaborated and it is found that a transformational change to a new system already starts at a time when the existing system still fully operates. The change to a new system (called B in this article) therefore already started and the predecessors of B already existed. These 'B-minuses' of the new system can be found through network analysis, where the most intense and connective nodes are the most likely 'B-minuses'. Alternatively B-minuses can be created through locating the areas where key-nodes and existing infrastructure can be related to existing urban functions. As illustrated in the case-study design, these principles are able to guide the design of a climate proof landscape. \textcopyright{} 2012 by the authors.}, - keywords = {Climate adaptation,Complex adaptive systems,Resilience,Spatial planning,Transformation,Transition} -} - -@article{Roithner2020, - title = {Implementing the Dimension of Quality into the Conventional Quantitative Definition of Recycling Rates}, - author = {Roithner, Caroline and Rechberger, Helmut}, - year = {2020}, - month = mar, - journal = {Waste Management}, - volume = {105}, - pages = {586--593}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.02.034}, - urldate = {2020-03-23}, - abstract = {With the proposed Circular Economy Package, the European Union is striving to play a leading role in the implementation of recycling goals. The significantly increased recycling targets are just some of the defined objectives. However, to assess the Member States' attainment of the new recycling targets, the European Union still builds on a purely quantitative recycling rate assessment procedure that neglects to include qualitative recycling aspects. This circumstance could lead to additional quality losses in recycling processes because recyclers might tend to focus exclusively on higher quantities to achieve the stricter recycling targets on time. To prevent such a development, the aim of this study is to establish a complementary recycling indicator that combines quantitative and qualitative recycling aspects in one single metric. The basis of this assessment method is the statistical entropy approach, which enables the concentrating or diluting effect of a recycling process brought about through the separation or mixing of materials to be measured. The results of the statistical entropy metric will provide greater insight into recycling processes (or systems) and thereby yield enhanced information on the quantity and purity of recycling outputs. The simple structure of the new approach will allow enhanced comparisons between technologies as well as national recycling performance. A case study on plastic packaging recycling demonstrates that the new recycling indicator provides multifaceted findings relative to the hitherto purely quantitative recycling assessment data, hence enriching conclusions on the recycling performance.}, - keywords = {Circular economy,Plastic packaging,Recycling assessment,Recycling effectiveness,Recycling rate,Statistical entropy} -} - -@article{roithnerProductDesignRecyclability2022, - title = {Product Design and Recyclability: {{How}} Statistical Entropy Can Form a Bridge between These Concepts - {{A}} Case Study of a Smartphone}, - author = {Roithner, Caroline and Cencic, Oliver and Rechberger, Helmut}, - year = {2022}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {331}, - pages = {129971}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129971}, - urldate = {2021-12-10} -} - -@article{rojonFormulatingConvincingRationale2012, - title = {Formulating a Convincing Rationale for a Research Study}, - author = {Rojon, C{\'e}line and Saunders, Mark N.K.}, - year = {2012}, - month = mar, - journal = {Coaching: An International Journal of Theory, Research and Practice}, - volume = {5}, - number = {1}, - pages = {55--61}, - publisher = {{Routledge}}, - issn = {1752-1882}, - doi = {10.1080/17521882.2011.648335}, - urldate = {2023-01-08}, - abstract = {Explaining the purpose of a research study and providing a compelling rationale is an important part of any coaching research project, enabling the work to be set in the context of both existing evidence (and theory) and its practical applications. This necessitates formulating a clear research question and deriving specific research objectives, thereby justifying and contextualising the study. In this research note we consider the characteristics of good research questions and research objectives and the role of theory in developing these. We conclude with a summary and a checklist to help ensure the rationale for a coaching research study is convincing.}, - keywords = {coaching research,rationale,research objective,research question,theory}, - file = {/Users/fabio/Zotero/storage/JVBLSUQN/Rojon_Saunders_2012_Formulating a convincing rationale for a research study.pdf} -} - -@article{Roma2017, - title = {Innovation {{Fab Labs}} . {{New}} Hubs for Socialization and Innovation}, - author = {Roma, Annalisa Di and Minenna, Vincenzo and Scarcelli, Alessandra}, - year = {2017}, - journal = {The Design Journal}, - volume = {6925}, - pages = {S3152-S3161}, - publisher = {{Routledge}}, - issn = {1460-6925}, - doi = {10.1080/14606925.2017.1352821}, - keywords = {Arts and Crafts movements,Digital design and fabrication,Makers movements,Social design and Innovation}, - file = {/Users/fabio/Zotero/storage/NBBWRPL8/Fab Labs New hubs for socialization and innovation.pdf} -} - -@inproceedings{Roman2017, - title = {{{NASA Centennial Challenge}}: {{3D-Printed Habitat}}}, - booktitle = {{{AIAA SPACE}} and {{Astronautics Forum}} and {{Exposition}}}, - author = {Roman, Monsi C. and Kim, Tony and Prater, Tracie J. and Mueller, Robert P.}, - year = {2017}, - month = sep, - publisher = {{American Institute of Aeronautics and Astronautics}}, - address = {{Reston, Virginia}}, - doi = {10.2514/6.2017-5279}, - isbn = {978-1-62410-483-1} -} - -@article{romanDefiningIdentifyingStrongly2023, - title = {Defining and Identifying Strongly Sustainable Product-Service Systems ({{SSPSS}})}, - author = {Roman, Philippe and Thiry, G{\'e}raldine and Muylaert, Coralie and Ruwet, Coline and Mar{\'e}chal, Kevin}, - year = {2023}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {391}, - pages = {136295}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136295}, - urldate = {2023-02-09}, - abstract = {Product-Service Systems (PSS) are widely recognised as promising models for increasing circularity and sustainability in business, but the extent to which they contribute to sustainability is still debated. While growing and insightful, the literature on PSS sustainability fails to cover all the relevant aspects and to take stock of the ways PSS can be conceptualised as contributing to strong sustainability. We contend that if PSS are to be designed to be strongly sustainable, clear guidance is needed based on both clear normative premises and sound empirical knowledge. Based on systematic and non-systematic literature reviews on the drivers of PSS (un)sustainability and a long-course field work on the development of PSS in Brussels (Belgium), the paper identifies important sustainability challenges that PSS frequently face and that PSS initiatives should address. These challenges are articulated with insights from the sustainable business models literature and anchored in a strong sustainability pre-analytical stance. An original analytical framework based on 5 dimensions (access, substitution, systemic dematerialisation, territorial anchoring and sufficiency) and 15 criteria of Strongly Sustainable Product-Service System (SSPSS) is proposed.}, - langid = {english}, - keywords = {Circular economy,Product-service system,Strong sustainability,Sufficiency,Sustainable business model}, - file = {/Users/fabio/Zotero/storage/3JWFG4QK/Roman et al. - 2023 - Defining and identifying strongly sustainable prod.pdf;/Users/fabio/Zotero/storage/7AB5Q46U/S0959652623004535.html} -} - -@article{Romani2021, - title = {Design, {{Materials}}, and {{Extrusion-Based Additive Manufacturing}} in {{Circular Economy Contexts}}: {{From Waste}} to {{New Products}}}, - author = {Romani, Alessia and Rognoli, Valentina and Levi, Marinella}, - year = {2021}, - month = jun, - journal = {Sustainability}, - volume = {13}, - number = {13}, - pages = {7269}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2071-1050}, - doi = {10.3390/su13137269}, - urldate = {2022-02-24}, - abstract = {The transition toward circular economy models has been progressively promoted in the last few years. Different disciplines and strategies may significantly support this change. Although the specific contribution derived from design, material science, and additive manufacturing is well-established, their interdisciplinary relationship in circular economy contexts is relatively unexplored. This paper aims to review the main case studies related to new circular economy models for waste valorization through extrusion-based additive manufacturing, circular materials, and new design strategies. The general patterns were investigated through a comprehensive analysis of 74 case studies from academic research and design practice in the last six-year period (2015\textendash 2021), focusing on the application fields, the 3D printing technologies, and the materials. Further considerations and future trends were then included by looking at the relevant funded projects and case studies of 2021. A broader number of applications, circular materials, and technologies were explored by the academic context, concerning the practice-based scenario linked to more consolidated fields. Thanks to the development of new strategies and experiential tools, academic research and practice can be linked to foster new opportunities to implement circular economy models.}, - keywords = {3D printing,Additive manufacturing,Circular materials,Design for sustainability,Material recycling,Product design,Recycling and reuse}, - file = {/Users/fabio/Zotero/storage/IBUND569/full-text.pdf} -} - -@article{romanoOdiAmoNudge2020, - title = {Odi et {{Amo}}: {{A}} Nudge to Reduce the Consumption of Single-Use Carrier Bags}, - author = {Romano, Alessandro and Sotis, Chiara}, - year = {2020}, - month = feb, - journal = {Waste Management}, - volume = {120}, - pages = {382--391}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.09.021}, - urldate = {2021-01-01}, - abstract = {In this article we show that it is possible to reduce carrier bags consumption without imposing additional costs on supermarket customers. To this end, we exploit the fact that people shopping in a certain area are likely to have homogeneous preferences on certain dimensions (e.g., sport teams). We implement a simple treatment in a supermarket in Naples, Italy: whenever a customer of the supermarket buys a single-use carrier bag we donate a small sum to an institution that is likely to be perceived negatively by the customers of the supermarket (an ``anti-charity``). Vice versa, whenever a customer does not purchase a bag, we donate the same amount to an association that is likely to be perceived positively by the customers of the supermarket (a ``charity''). We measure the impact of the treatment with respect to the previous weeks, the corresponding weeks of the previous year and we look at the persistence of the effect. Our results show that this treatment causes a significant reduction in bags consumption without imposing monetary costs on supermarket customers. Moreover, we show that our nudge can easily be used by regulators at virtually no cost by creating multi-city tournaments. We explain how these tournaments could be arranged.}, - keywords = {Consumer Waste,Nudging,Plastic Bags,Pro-environmental behavior,Single-Use Plastic} -} - -@article{Romao2009, - title = {Poly (Ethylene Terephthalate) Thermo-Mechanical and Thermo-Oxidative Degradation Mechanisms}, - author = {Rom{\~a}o, Wanderson and Franco, Marcos F. and Corilo, Yuri E. and Eberlin, Marcos N. and Spinac{\'e}, M{\'a}rcia A S and De Paoli, Marco A.}, - year = {2009}, - journal = {Polymer Degradation and Stability}, - volume = {94}, - number = {10}, - pages = {1849--1859}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2009.05.017}, - abstract = {1H NMR and MALDI-TOF MS measurements were used to study the thermo-mechanical and thermooxidative degradation mechanisms of bottle-grade PET (btg-PET). In the thermo-oxidative degradation, the concentration of low molar mass compounds increased with time and the main products were cyclic and linear di-acid oligomers. In the thermo-mechanical degradation, the main-chain scission reactions affect the stability of the cyclic oligomers. One of the most important bottle-grade PET co-monomers is diethylene glycol (DEG), which is a "reactive site" in the thermal degradation of btg-PET. The DEG co-monomer was shown to be the precursor to colour changes in btg-PET, owing to the attack by molecular oxygen on the methylenic protons adjacent to the ether oxygen atoms of DEG. This behaviourwas observed in the thermooxidative degradation process in which the degradation of DEG causes the release of hydroxyl radicals in the polymeric matrix, thereby producing mono- and di-hydroxyl substituted species. Thiswas also observed in the thermo-mechanical degradation process. ?? 2009 Elsevier Ltd. All rights reserved.}, - isbn = {0141-3910}, - keywords = {Diethylene glycol,Poly(ethylene terephthalate),Thermo-mechanical degradation,Thermo-oxidative degradation}, - file = {/Users/fabio/Zotero/storage/7LYZXDJL/Poly (ethylene terephthalate) thermo-mechanical and thermo-oxidative degradation mechanisms.pdf} -} - -@article{romeijnInstantaneousLongtermMechanical2022, - title = {Instantaneous and Long-Term Mechanical Properties of {{Polyethylene Terephthalate Glycol}} ({{PETG}}) Additively Manufactured by Pellet-Based Material Extrusion}, - author = {Romeijn, Thomas and Behrens, Michael and Paul, Gavin and Wei, Dongbin}, - year = {2022}, - month = nov, - journal = {Additive Manufacturing}, - volume = {59}, - pages = {103145}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2022.103145}, - urldate = {2022-09-18}, - abstract = {Polyethylene Terephthalate Glycol (PETG) is a highly popular feedstock for extrusion-based additive manufacturing. While data are available on the instantaneous properties of additively manufactured PETG, few research have been done on forecasting the creep behaviour of additively manufactured PETG while accounting for the material altering effects of ageing. This research article aims to enhance the understanding of both the instantaneous and time-dependent mechanical properties of additively manufactured PETG through a series of tensile, FEA simulations, Dynamic Mechanical Analysis (DMA), and two types of creep experiments. The details of experimental and mathematical calculations of the instantaneous and time-dependent properties of additively manufactured PETG are provided. Nine independent material parameters have been determined including three Young's moduli, three shear moduli and three Poisson's ratios, to fully quantify an orthotropic material model of additively manufactured PETG. The printed material exhibited a Young's modulus that is 86.5\% of the theoretically possible value in direction 1, a Young's modulus in direction 2 is 66.0\% of the theoretical optimum, and a Young's modulus in direction 3 is within 1\% of its theoretical maximum. In addition to reporting the creep behaviour of PETG, the novel application of the Time-Temperature Superposition Principle (TTSP) to additively manufactured PETG has been shown to produce an age-affected creep prediction for up to 3.88 years based on samples aged for 221~h and at 23~\textdegree C. The methodology and data models have been found to enable predictions for other ages and temperatures. It was concluded that the application of the TTSP creep methodology was limited by the creep test temperature, 60~\textdegree C, after which the material began to behave in a non rheologically-simple manner.}, - langid = {english}, - keywords = {Aging,Creep,Material extrusion,Polyethylene Terephthalate Glycol (PETG),Tensile properties,Time-Temperature Superposition Principle (TTSP)}, - file = {/Users/fabio/Zotero/storage/N8F9KDS9/S2214860422005346.html} -} - -@inproceedings{RomeroAlva2018, - title = {Design of a {{3D Printer}} and {{Integrated Supply System}}}, - booktitle = {2018 {{IEEE XXV International Conference}} on {{Electronics}}, {{Electrical Engineering}} and {{Computing}} ({{INTERCON}})}, - author = {{Romero-Alva}, Victor and {Alvarado-Diaz}, Witman and {Roman-Gonzalez}, Avid}, - year = {2018}, - month = aug, - pages = {1--4}, - publisher = {{IEEE}}, - doi = {10.1109/INTERCON.2018.8526458}, - isbn = {978-1-5386-5491-0}, - file = {/Users/fabio/Zotero/storage/ERFHEYZG/Design of a 3D Printer and Integrated Supply System.pdf} -} - -@article{romeroExergyGlobalEnergy2014, - title = {Exergy as a Global Energy Sustainability Indicator. {{A}} Review of the State of the Art}, - author = {Romero, Jos{\'e} Carlos and Linares, Pedro}, - year = {2014}, - doi = {10.1016/j.rser.2014.02.012}, - urldate = {2021-08-29}, - abstract = {This paper looks at the suitability of using exergy as an indicator for energy sustainability studies, by reviewing the relevant literature and describing and assessing the different uses that have been proposed for it as a global energy sustainability indicator. Exergy is a thermodynamic property that links the first and the second thermodynamic principles as well as connects a system under study with the environment where it belongs. Since the first principle of thermodynamics measures quantity of energy and the second measures irreversibilities, i.e. quality of energy, having a single thermodynamic indicator which is able to deal with both issues at the same time means a great advance in energy sustainability studies. Our review shows that using exergy for weak sustainability studies presents some problems, but still offers a worthy contribution to this field, more valuable than pure economic analyses. Strong sustainability assessments featuring exergy show more drawbacks and complications, but can also play a key role in a sustainability framework designed in order to obtain sustainable policies which are able to maintain homeostatic relations between the system under study and its environment, thus complementing traditional economic approaches which are mainly focused on the economic and social poles of sustainability.}, - keywords = {Exergy,Strong sustainability,Weak sustainability}, - file = {/Users/fabio/Zotero/storage/SEMFAB8Q/full-text.pdf} -} - -@article{rommeTheoriesToolsCalling2023, - title = {From Theories to Tools: {{Calling}} for Research on Technological Innovation Informed by Design Science}, - shorttitle = {From Theories to Tools}, - author = {Romme, A. Georges L. and Holmstr{\"o}m, Jan}, - year = {2023}, - month = mar, - journal = {Technovation}, - volume = {121}, - pages = {102692}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2023.102692}, - urldate = {2023-02-09}, - abstract = {Most studies published in Technovation adopt a theory-driven approach toward empirical phenomena. In this editorial, we call for a more instrumental approach, one that effectively serves the needs of practitioners in the field of technological innovation as well as scholars seeking to increase their impact on innovation practice. In this respect, design science (DS) methodologies have emerged in various adjacent domains such as information systems, operations management, and entrepreneurship. Inspired by Simon's ``The Sciences of the Artificial'', DS operates at the interface of problem-solving design and explanatory science to create and test solutions as artifacts. Whereas DS work can result in various kinds of artifacts, tools for practitioners are the most promising ones. We first provide several examples of DS work resulting in widely used tools and then identify various challenges in the technological innovation domain that call for tools addressing these challenges. Subsequently, we provide practical guidance on how to prepare manuscripts about designing and testing tools which are likely to have a major impact on practice.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/UYQMBYWR/Romme y Holmström - 2023 - From theories to tools Calling for research on te.pdf;/Users/fabio/Zotero/storage/VMFVLWK8/S0166497223000032.html} -} - -@article{Ronkay2021, - title = {Plastic Waste from Marine Environment: {{Demonstration}} of Possible Routes for Recycling by Different Manufacturing Technologies}, - author = {Ronkay, F. and Molnar, B. and Gere, D. and Czigany, T.}, - year = {2021}, - month = jan, - journal = {Waste Management}, - volume = {119}, - pages = {101--110}, - publisher = {{Pergamon}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.09.029}, - urldate = {2020-10-19}, - abstract = {The increasing amount of marine plastic waste poses challenges including, not only the collection, but also the subsequent recyclability of the plastic. An artificial accelerated weathering procedure was developed, which modelled the marine environment and investigated the recyclability of weathered and non-weathered PET. Marine conditions were simulated for poly(ethylene terephthalate) (PET) bottle material and high-density polyethylene (HDPE) cap material. It consisted of 2520 h cyclical weathering, alternating the sample between a salt spray and a Xenon-chamber\textemdash this corresponds to roughly 3\textendash 4 years on the surface of an ocean. It was proved that the molecular weight of PET is a function of weathering time and can be described mathematically. Microscopic examination of the surface of the PET bottles and HDPE caps proved that these surfaces were damaged. After weathering, manufacturing tests were performed on the PET material by extrusion, injection moulding, 3D printing and thermoforming. Quantitative comparison between products manufactured by the same technology was performed in order to compare the qualities of products made from original PET, non-weathered PET waste, which was the example of classical recycling, and weathered PET. In the case of products made from weathered PET, certain mechanical and optical properties (e.g. impact strength and transparency) were significantly impaired compared to the original PET and the recycled, non-weathered PET. Certain other properties (e.g. strength and rigidity) did not change significantly. It was proved that the samples from weathered plastic material can be successfully recycled mechanically and used to manufacture plastic products.}, - pmid = {33049515}, - keywords = {Global environmental change,Marine waste,Microplastic,PET bottle,Recyclability,Sustainable development}, - file = {/Users/fabio/Zotero/storage/22EM8QWL/full-text.pdf} -} - -@article{roosenExpandingCollectionPortfolio2022, - title = {Expanding the Collection Portfolio of Plastic Packaging: {{Impact}} on Quantity and Quality of Sorted Plastic Waste Fractions}, - author = {Roosen, Martijn and Mys, Nicolas and Kleinhans, Kerstin and Lase, Irdanto Saputra and Huysveld, Sophie and Brouwer, Marieke and {Thoden van Velzen}, Eggo U. and Van Geem, Kevin M. and Dewulf, Jo and Ragaert, Kim and Dumoulin, Ann and {de Meester}, Steven}, - year = {2022}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {178}, - pages = {106025}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106025}, - urldate = {2021-12-01} -} - -@article{Røpke2021, - title = {From Value to Valuation and Appropriation. {{A}} Comment on {{Pirgmaier}}'s Paper ``{{The}} Value of Value Theory for Ecological Economics''}, - author = {R{\o}pke, Inge}, - year = {2021}, - journal = {Ecological Economics}, - volume = {187}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107102}, - urldate = {2021-05-31}, - abstract = {Pirgmaier's paper ``The value of value theory for ecological economics'' is a plea to ecological economists to take a greater interest in value theory and, in particular, to appreciate the Marxian labour theory of value. This paper first criticises this view and then proceeds to outline an alternative perspective, which suggests that the focus on value should be replaced by a focus on valuation processes and the role these processes play in the appropriation of goods and services. Furthermore, the importance of biophysical measures as a critical tool is emphasised, both to highlight exploitation and to promote understandings that can support sustainability transitions.}, - keywords = {Appropriation claims,Biophysical measures,Exploitation,Rent,Sustainability transition,Valuation,Value theory}, - file = {/Users/fabio/Zotero/storage/6CTCDHYS/full-text.pdf} -} - -@book{Rosa2017, - title = {Overview of the {{Maker Movement}} in the {{European Union}}}, - author = {Rosa, Paulo and Ferretti, Federico and Guimar{\~a}es Pereira, {\^A}ngela and Panella, Francesco and Wanner, Maximilian}, - year = {2017}, - number = {December}, - doi = {10.1007/s11355-011-0164-1}, - abstract = {Over the last decade, we witnessed an unprecedented booming of communities engaged in do-it-yourself (DIY) activities worldwide. FabLabs, Hackerspaces and Makerspaces can be seen as the physical representations of the maker movement. These unique spaces seek to provide communities, businesses and entrepreneurs the infrastructures and manufacturing equipment indispensable to turn their ideas and concepts into reality. The objective of this study is to assess and quantify the range of the maker movement across Europe, investigating the distribution and activity of FabLabs, Hackerspaces and Makerspaces as the physical spaces where the phenomenon takes place. Also, we explore tools and techniques employed within the spaces as well as community strategies with an aim to uncover the socio-technical and socio-economic impact of the initiatives.}, - isbn = {978-92-79-70525-0}, - file = {/Users/fabio/Zotero/storage/3GPGTH4L/Overview of the Maker Movement in theEuropean Union.pdf} -} - -@book{Rosa2018, - title = {Futures of {{Work}}: {{Perspectives}} from the {{Maker Movement Atmospheric}} Composition Change Research {{View}} Project {{Participatory Multi-criteria Approaches View}} Project}, - author = {Rosa, Paulo and Guimar{\~a}es Pereira, {\^A}ngela and Ferretti, Federico}, - year = {2018}, - doi = {10.2760/96812}, - isbn = {978-92-79-89734-4}, - file = {/Users/fabio/Zotero/storage/CACKC3SB/Futures of Work- Perspectives from the Maker Movement.pdf} -} - -@article{Rosa2019, - title = {Towards {{Circular Business Models}}: {{A}} Systematic Literature Review on Classification Frameworks and Archetypes}, - author = {Rosa, Paolo and Sassanelli, Claudio and Terzi, Sergio}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117696}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117696}, - file = {/Users/fabio/Zotero/storage/ZQPBTQE6/Towards Circular Business Models- A systematic literature review on classification frameworks and archetypes.pdf} -} - -@article{Rosa2019a, - title = {Assessing Relations between {{Circular Economy}} and {{Industry}} 4.0: A Systematic Literature Review}, - author = {Rosa, Paolo and Sassanelli, Claudio and Urbinati, Andrea and Chiaroni, Davide and Terzi, Sergio}, - year = {2019}, - month = nov, - journal = {International Journal of Production Research}, - pages = {1--26}, - issn = {0020-7543}, - doi = {10.1080/00207543.2019.1680896} -} - -@article{Rosa2019b, - title = {Circular {{Business Models}} versus Circular Benefits: {{An}} Assessment in the Waste from {{Electrical}} and {{Electronic Equipments}} Sector}, - author = {Rosa, Paolo and Sassanelli, Claudio and Terzi, Sergio}, - year = {2019}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {231}, - pages = {940--952}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.310}, - urldate = {2020-03-21}, - abstract = {Huge depletion of raw materials, inefficient waste management practices, increasing population and consumerist lifestyles, are even more coping companies with the adoption of Circular Economy (CE) principles in their Business Models (BMs). However, benefits coming from the implementation of CE within companies are not always clear to managers. To this aim, the paper has a multiple purpose. Firstly, the work provides to academics the list of the benefits deriving from CE adoption through a systematic literature review, declined under the Triple Bottom Line (TBL) perspective of sustainability, also by validating and grounding them through four practical use cases. Secondly, the work links CE benefits with a set of CBMs \textendash{} based on Product-Service Systems (PSSs) \textendash{} through a set of interviews with experts belonging to the Waste from Electrical and Electronic Equipment (WEEE) sector, trying to support industrials in both i) detecting benefits related with the adoption of CBMs, ii) increasing their awareness on benefits and iii) reaching them into practice. Given that PSS-based CBMs are renown both by the scientific and industrial community as the most suitable ones to achieve circularity, they were considered as the most appropriate to adopt also in this work. Finally, four use cases coming from the WEEE sector demonstrate how to link CBMs with CE benefits.}, - keywords = {Circular benefits,Circular business models,Circular economy,Product-service systems,Waste electrical and electronic equipments} -} - -@article{RosadoMurillo2017, - title = {Open Hardware as an Experimental Innovation Platform: Preliminary Research Questions and Findings}, - author = {Rosado Murillo, Luis and Kauttu, Pietari}, - year = {2017}, - volume = {1}, - number = {1}, - pages = {26}, - doi = {10.23726/cij.2017.462}, - keywords = {Addition,Article,Comparative and general--Article,Development,Forecasting--Study and teaching,Grammar,Hardware,Humanities,Implements,innovation,Interviews,march\'e,market,mat\'eriel informatique,need,Nuclear physics--Research,October,Open hardware,Open science,Organization,Pal\'eozo\"ique,point,pointe,prospection,recherche,research,Respect,savoir,Science,sciences,Scientific innovation,Scientific platform,sout\`enement,survey,testament,Tools,Transfer,Use,Will}, - file = {/Users/fabio/Zotero/storage/2VK7F7M3/Open hardware as an experimental innovation platform- preliminary research questions and findings.pdf} -} - -@article{Rosana2017, - title = {Fire Retardant Treatment of Low Contamination for Panels Made from Recycled Plastic Films and Polyester Resin}, - author = {Rosana, Gaggino and Jer{\'o}nimo, Kreiker}, - editor = {Gupta, Manoj}, - year = {2017}, - month = jun, - journal = {Cogent Engineering}, - volume = {4}, - number = {1}, - issn = {2331-1916}, - doi = {10.1080/23311916.2017.1343641} -} - -@article{rosaPrintinplaceInterconnectedDeformable2017, - title = {Print-in-Place of {{Interconnected Deformable}} and {{Rigid Parts}} of {{Articulated Systems}}}, - author = {Rosa, F. and Bordegoni, M. and Dentelli, A. and Sanzone, A. and Sotgiu, A.}, - year = {2017}, - journal = {Procedia Manufacturing}, - volume = {11}, - pages = {555--562}, - publisher = {{Elsevier B.V.}}, - issn = {23519789}, - doi = {10.1016/j.promfg.2017.07.149}, - urldate = {2021-01-12}, - abstract = {One of the most fascinating possibilities of Additive Manufacturing technologies is their capability to realize objects that include various types of joints and moving parts. The research presented in this paper proposes to embed elastic elements in these joints in order to control their compliance. Two applications are also presented, in order to demonstrate, firstly, the practical feasibility of this innovative joint, and, secondly, the possibility to control joint elastic behavior in order to force the connected parts to automatically return to their initial positions when the actuating load is removed.}, - keywords = {Adaptive-Grip,Additive Manufacturing,Flexi-Hand,Fused Deposition Modelling,Multi-Material-Deposition,Print-in-Place}, - file = {/Users/fabio/Zotero/storage/BU7P824W/full-text.pdf} -} - -@article{Rosca2020, - title = {Women Entrepreneurs as Agents of Change: {{A}} Comparative Analysis of Social Entrepreneurship Processes in Emerging Markets}, - author = {Rosca, Eugenia and Agarwal, Nivedita and Brem, Alexander}, - year = {2020}, - journal = {Technological Forecasting and Social Change}, - volume = {157}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120067}, - urldate = {2020-05-26}, - abstract = {In recent years, social and women entrepreneurship have become two growing fields of entrepreneurship research. In the context of social entrepreneurship, earlier research indicates that women are a better fit for leading social enterprises. However, the relevance of gender in the field of social entrepreneurship is underexplored and calls for further research, framing the mainstay of this study. Through a multiple case study approach employing four firms from two emerging markets \textendash{} India and Colombia \textendash{} we analyze how women entrepreneurs engage in social entrepreneurship processes in uncertain Base of the Pyramid environments. We use the effectuation lens to investigate the entrepreneurial journey and decision-making logics employed at various stages of the venture development. Findings show that women social entrepreneurs are highly motivated concerning social issues. Also, women entrepreneurs show a subtle transition between the two approaches of causation and effectuation during the venture creation processes. This study highlights the specific challenges that women entrepreneurs face in the emerging market context and the inclusive strategies they employ to enhance socio-economic development.}, - keywords = {BoP,Emerging economies,Inclusive business,Social entrepreneurship,Women entrepreneurship}, - file = {/Users/fabio/Zotero/storage/P3VAV8PN/full-text.pdf} -} - -@book{Rosen2012, - title = {Fundamental Principles of Polymeric Materials}, - author = {Rosen, Stephen L and Brazel, Christopher S}, - year = {2012}, - journal = {Wiley}, - number = {3}, - publisher = {{John Wiley \& Sons, Inc.}}, - urldate = {2015-09-30}, - isbn = {0-470-50542-7} -} - -@article{Rosenthal2018, - title = {Liquid {{Deposition Modeling}}: A Promising Approach for {{3D}} Printing of Wood}, - author = {Rosenthal, Michael and Henneberger, Clara and Gutkes, Anna and Bues, Claus-Thomas}, - year = {2018}, - month = mar, - journal = {European Journal of Wood and Wood Products}, - volume = {76}, - number = {2}, - pages = {797--799}, - issn = {0018-3768}, - doi = {10.1007/s00107-017-1274-8} -} - -@article{rosenthalEffectsBinProximity2021, - title = {Effects of Bin Proximity and Informational Prompts on Recycling and Contamination}, - author = {Rosenthal, Sonny and Linder, Noah}, - year = {2021}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {168}, - pages = {105430}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105430}, - urldate = {2021-02-14}, - abstract = {This between-subjects experiment manipulated the proximity of a waste bin relative to a recycling bin and the presence of information about why and how to rinse recyclables. After completing a yogurt taste test, 272 undergraduate students disposed of their plastic tasting cups in either a waste bin or a recycling bin. Binary logistic regression showed use of the recycling bin roughly tripled when the waste bin was made less convenient by moving it away from the tasting area (p {$<$}. 001, Nagelkerke R2 = 0.54). Univariate ANOVA showed the contamination level of recycled items was lower when an informational prompt indicated how clean recyclables need to be (p {$<$}. 001, {$\eta$}2p = 0.08), but not when it indicated why rinsing is important. These findings showcase how manipulating the physical environment can be a powerful tool to steer behavior and how tailored information can complement physical changes to promote proenvironmental actions.}, - keywords = {Accessibility,Affordances,Procedural information,Prompts,Proximity,Recycling}, - file = {/Users/fabio/Zotero/storage/QQSB66PK/full-text.pdf} -} - -@article{rosenWhySharedSocioeconomic2021, - title = {Why the Shared Socioeconomic Pathway Framework Has Not Been Useful for Improving Climate Change Mitigation Policy Analysis}, - author = {Rosen, Richard A.}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120611}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120611}, - urldate = {2021-02-14}, - abstract = {Numerous ways to improve the usefulness of climate change mitigation scenarios that rely on the Shared Socioeconomic Pathway (SSP) framework that was developed over the last 10 years have been suggested. The problem with these proposals is that the diagnosis of what has led to the inability of integrated assessment modelers to properly analyze mitigation policies is wrong. The first main problem with the past use of the SSP-based mitigation scenarios is that few input variables for what is supposed to be the same SSP are given the same numerical values by different modeling teams. The more significant problem with the way in SSP-based mitigation scenarios have been used to analyze mitigation policies is that the different integrated assessment models (IAMs) have very different structures and functions. Thus, even if all the input variables comprising a single SSP had the same numerical values, the scenario results from running such a SSP through different IAMs would be quite different, leading to different understandings of the usefulness of different mitigation policies. This situation can be avoided by developing just two or three more detailed and improved IAMs focused on the critical next 10\textendash 20 years for mitigating climate change.}, - keywords = {Climate change mitigation,Economics of mitigation,Integrated assessment models,Mitigation scenarios,Shared Socioeconomic Pathways} -} - -@article{Rosevelt2013, - title = {Marine Debris in Central {{California}}: {{Quantifying}} Type and Abundance of Beach Litter in {{Monterey Bay}}, {{CA}}}, - author = {Rosevelt, C. and Los Huertos, M. and Garza, C. and Nevins, H.M.}, - year = {2013}, - month = jun, - journal = {Marine Pollution Bulletin}, - volume = {71}, - number = {1-2}, - pages = {299--306}, - issn = {0025326X}, - doi = {10.1016/j.marpolbul.2013.01.015} -} - -@article{Ross2003, - title = {The Environmental Effect of Reusing and Recycling a Plastic-Based Packaging System}, - author = {Ross, Stuart and Evans, David}, - year = {2003}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {11}, - number = {5}, - pages = {561--571}, - issn = {09596526}, - doi = {10.1016/S0959-6526(02)00089-6}, - urldate = {2014-06-25}, - keywords = {iso 14040,life-cycle assessment,plastic packaging,re-use,recycling}, - file = {/Users/fabio/Zotero/storage/HXDMMCHR/Ross, Evans - 2003 - The environmental effect of reusing and recycling a plastic-based packaging system.pdf} -} - -@article{rossettoMeasuringFrugalInnovation2023, - title = {Measuring Frugal Innovation Capabilities: {{An}} Initial Scale Proposition}, - shorttitle = {Measuring Frugal Innovation Capabilities}, - author = {Rossetto, Dennys Eduardo and Borini, Felipe Mendes and Bernardes, Roberto Carlos and Frankwick, Gary L.}, - year = {2023}, - month = mar, - journal = {Technovation}, - volume = {121}, - pages = {102674}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2022.102674}, - urldate = {2023-02-09}, - abstract = {This paper proposes an initial scale to measure the frugal innovation capabilities within organizations. Our scale comprises three major dimensions: (1) focus on core functionalities, (2) substantial cost reduction, and (3) shared sustainable engagement. We adopted the frugal innovation efficiency-driven perspective based on both the resource-based and the capability-based views. From primary survey data of 1,097 companies in three countries (Brazil, India, and the USA), we developed a reliable and valid scale to measure frugal innovation capabilities comprising ten features with clear psychometric properties. We also contribute to the innovation research literature by revisiting its main texts and proposing a concept of frugal innovation capabilities. In doing so, we introduce an initial measuring instrument. Such an initiative represents an advance in the literature to better understand the development of frugal innovation, guiding the exploration of frugality-based advantages. It enables managers to identify the organizational capabilities that are needed to increase the odds of developing frugal innovations. This is a first attempt to measure the concept of frugal innovation capabilities. There is much room for the exploration of its other dimensions.}, - langid = {english}, - keywords = {Capabilities,Efficiency-driven,Frugal innovation,Measurement,Scale}, - file = {/Users/fabio/Zotero/storage/VAIZN5RA/Rossetto et al. - 2023 - Measuring frugal innovation capabilities An initi.pdf;/Users/fabio/Zotero/storage/7XYEH4I2/S0166497222002255.html} -} - -@article{rossitWasteBinsLocation2022, - ids = {rossit2022a}, - title = {Waste Bins Location Problem: {{A}} Review of Recent Advances in the Storage Stage of the {{Municipal Solid Waste}} Reverse Logistic Chain}, - author = {Rossit, Diego Gabriel and Nesmachnow, Sergio}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {342}, - eprint = {2202.13754}, - pages = {130793}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130793}, - urldate = {2022-03-07}, - abstract = {Municipal Solid Waste systems have important economic, social, and environmental impacts for society. Within the diverse stages of the Municipal Solid Waste reverse logistic chain, the waste bin location problem consists in properly locating bins in the corresponding urban area to store waste produced by the citizens. This stage has a large impact in the overall efficiency of the whole system. Thus, several researchers have addressed the location problem considering different optimization criteria and approaches. This article presents a comprehensive review of recent advances on the Waste Bins Location Problem, with the main goal of serving as a reference point for decision-makers in this area. The main findings indicate that several optimization criteria and resolution approaches have been applied, but few proposals have simultaneously optimized bins location and waste collection, or considered uncertainty of the model parameters and integrated approaches.}, - archiveprefix = {arxiv}, - keywords = {Municipal Solid Waste,Review,Waste bins location problem}, - file = {/Users/fabio/Zotero/storage/MWLBT5WA/Rossit y Nesmachnow - 2022 - Waste bins location problem A review of recent ad.pdf;/Users/fabio/Zotero/storage/9VKMFA2D/S0959652622004310.html} -} - -@article{Roth2019, - title = {Big Data Insights into Social Macro Trends (1800\textendash 2000): {{A}} Replication Study}, - author = {Roth, Steffen and Schwede, Peter and Valentinov, Vladislav and {\v Z}a{\v z}ar, Kre{\v s}imir and {Kaivo-oja}, Jari}, - year = {2019}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {149}, - pages = {119759}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119759} -} - -@article{rothGreatResetRestratification2021, - title = {The {{Great Reset Restratification}} for Lives, Livelihoods, and the Planet}, - author = {Roth, Steffen}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120636}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120636}, - urldate = {2021-02-14} -} - -@article{rotmansMoreEvolutionRevolution2001, - title = {More Evolution than Revolution: {{Transition}} Management in Public Policy}, - author = {Rotmans, Jan and Kemp, Ren{\'e} and Van Asselt, Marjolein}, - year = {2001}, - journal = {Foresight}, - volume = {3}, - number = {1}, - pages = {15--31}, - publisher = {{Emerald Group Publishing Ltd.}}, - issn = {14636689}, - doi = {10.1108/14636680110803003}, - urldate = {2022-03-13}, - abstract = {Transitions are transformation processes in which society changes in a fundamental way over a generation or more. Although the goals of a transition are ultimately chosen by society, governments can play a role in bringing about structural change in a stepwise manner. Their management involves sensitivity to existing dynamics and regular adjustment of goals to overcome the conflict between long-term ambition and short-term concerns. This article uses the example of a transition to a low emission energy supply in the Netherlands to argue that transition management provides a basis for coherence and consistency in public policy and can be the spur to sustainable development.}, - keywords = {Evolution,Sustainable development,The Netherlands} -} - -@article{rotondoSocialSideSustainable2019, - title = {The Social Side of Sustainable Business Models: {{An}} Explorative Analysis of the Low-Cost Airline Industry}, - author = {Rotondo, Federico and Corsi, Katia and Giovanelli, Lucia}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {225}, - pages = {806--819}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.345}, - urldate = {2020-06-07}, - abstract = {The concept of a sustainable business model has increasingly been used to depict business cases that, by incorporating a triple bottom line approach, seek to realize economic success through environmental and social initiatives. Nevertheless, there is a call for more empirical research on design and innovation with respect to sustainable business models, as well as on the relationship they have with firm performance. This paper focuses on the social side of sustainability and aims to explore the extent to which integrating social sustainability objectives into the business model has a positive influence on a firm's financial performance, promotes sustainable innovation and enhances the firm's ability to withstand discontinuities such as the recent financial crisis. Following a review of the existing literature, four propositions are formulated and subsequently tested through a multiple case study of four international low-cost carriers. The results have implications for theory and practice as they reveal that integrating social sustainability in the business model i) does not automatically influence financial performance, although it may have a role in the long-term financial outcomes of the firm; ii) influences the characteristics and effectiveness of sustainable innovation; iii) must be accompanied by intelligent managerial activity to be effective; and iv) does not necessarily lead to faster financial recovery in the aftermath of a discontinuity, but it does make a firm more resilient over a long-term basis.}, - keywords = {Discontinuities,Low-cost carriers,Management systems,Social sustainability,Sustainable business model,Sustainable innovation} -} - -@article{Rousta2016, - title = {A Procedure to Transform Recycling Behavior for Source Separation of Household Waste}, - author = {Rousta, Kamran and Bolton, Kim and Dahl{\'e}n, Lisa}, - year = {2016}, - month = apr, - journal = {Recycling}, - volume = {1}, - number = {1}, - pages = {147--165}, - publisher = {{MDPI AG}}, - issn = {23134321}, - doi = {10.3390/recycling1010147}, - urldate = {2020-03-12}, - abstract = {Household waste separation at the source is a central part of waste management systems in Sweden. Resource recovery of materials and energy increased substantially after separate collection was implemented in the 1990s. A procedure to transform recycling behavior for the sorting of household waste\textemdash called the recycling behavior transition (RBT) procedure\textemdash was designed and implemented in a waste management system in Sweden. Repeated use of this procedure, which will assist in the continual improvement of household sorting, consists of the following four consecutive steps: (i) evaluating the current sorting behavior; (ii) identifying appropriate interventions; (iii) implementing the interventions, and; (iv) assessing the quantitative effect of the interventions. This procedure follows action research methodology and it is the first time that such a procedure has been developed and implemented for the sorting of household waste. The procedure can easily be adapted to any source separation system (which may have different local situations) and, by improving the source separation, will increase the resource recovery in the waste management system. The RBT procedure, together with its strengths and weaknesses, is discussed in this paper, and its implementation is exemplified by a pilot study done in Sweden.}, - keywords = {Household waste,Recycling behavior,Resource recovery,Source separation}, - file = {/Users/fabio/Zotero/storage/XNQT848F/full-text.pdf} -} - -@article{Rousta2020, - title = {Household {{Waste Sorting Participation}} in {{Developing Countries}}\textemdash{{A Meta-Analysis}}}, - author = {Rousta, Kamran and Zisen, Liu and Hellwig, Coralie}, - year = {2020}, - month = mar, - journal = {Recycling}, - volume = {5}, - number = {1}, - pages = {6}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2313-4321}, - doi = {10.3390/recycling5010006}, - urldate = {2020-03-27}, - abstract = {Given the increasing efforts at improving waste management in developing countries, this study aimed to analyze factors that influence participation in household waste sorting. It thereby is the first review that extends the published literature on this topic. A meta-analysis was conducted that analyzed twelve influencing factors. A moderate correlation was found for the most strongly influential factors\textemdash attitude, moral norm, subjective norm and perceived behavior control\textemdash which indicates that people's perception of waste sorting is most influencing in prompting participation in household waste sorting in developing countries. The results of this meta-analysis indicate that knowledge, situational factors, such as physical conditions, and governmental incentives can influence participation in household waste sorting in developing countries but the relationship between those factors and other factors with high correlations should be studied further. Notably, socio-demographic factors have the weakest influence on the participation in waste sorting in developing countries despite a large body of research on such factors. It can be constructive to take the relationship across the identified factors and the participation in waste sorting into consideration when aiming to implement measures to increase the participation in waste management schemes through waste sorting. The outcome of this study may contribute to recommendations and policy suggestions regarding the promotion of sustainable waste management through household waste sorting in developing countries.}, - keywords = {developing countries,participation,recycling behavior,source separation,waste management,waste sorting}, - file = {/Users/fabio/Zotero/storage/9SH56DQX/full-text.pdf} -} - -@inproceedings{Roux-Marchand2020, - title = {Connecting the Strategic Intent of Innovation Labs and Projects: The Case of the {{Green Fablab}}}, - booktitle = {2020 {{IEEE International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}}/{{ITMC}})}, - author = {{Roux-Marchand}, Thibaut and Cruz, Fabio and Dupont, Laurent and Camargo, Mauricio and Osorio, Ferney}, - year = {2020}, - month = jun, - pages = {1--10}, - publisher = {{IEEE}}, - doi = {10.1109/ICE/ITMC49519.2020.9198320}, - isbn = {978-1-72817-037-4}, - keywords = {Distributed recycling,Green fablab,Innovatio labs,Strategic intent}, - file = {/Users/fabio/Zotero/storage/8RAMMDFR/PID6461065.pdf} -} - -@article{Rowley2004, - title = {Conducting a {{Literature Review}}}, - author = {Rowley, Jennifer and Stack, Frances}, - year = {2004}, - journal = {Management Research News}, - volume = {27}, - number = {6}, - eprint = {1011.1669v3}, - pages = {31--39}, - issn = {0888-0395}, - doi = {10.1108/01409170410784185}, - abstract = {This article offers support and guidance for students undertaking a literature review as part of their dissertation during an undergraduate or Masters course. A literature review is a summary of a subject field that supports the identification of specific research questions. A literature review needs to draw on and evaluate a range of different types of sources including academic and professional journal articles, books, and web-based resources. The literature search helps in the identification and location of relevant documents and other sources. Search engines can be used to search web resources and bibliographic databases. Conceptual frameworks can be a useful tool in developing an understanding of a subject area. Creating the literature review involves the stages of: scanning, making notes, structuring the literature review, writing the literature review, and building a bibliography.}, - archiveprefix = {arxiv}, - isbn = {0140-9174 U6 - ctx\_ver=Z39.88-2004\&ctx\_enc=info\%3Aofi\%2Fenc\%3AUTF-8\&rfr\_id=info:sid/summon.serialssolutions.com\&rft\_val\_fmt=info:ofi/fmt:kev:mtx:journal\&rft.genre=article\&rft.atitle=Conducting+a+literature+review\&rft.jtitle=Management+Research+News\&rft.au=Frances+Slack\&rft.au=Jennifer+Rowley\&rft.date=2004-01-01\&rft.pub=Emerald+Group+Publishing+Limited\&rft.issn=0140-9174\&rft.volume=27\&rft.issue=6\&rft.spage=31\&rft.epage=39\&rft\_id=info:doi/10.1108\%2F01409170410784185\&rft.externalDBID=n\%2Fa\&rft.exte}, - pmid = {1532013}, - file = {/Users/fabio/Zotero/storage/9ZHT4GIZ/m-api-2474676e-1109-febb-459a-858635ac2897.pdf} -} - -@article{Roy2020, - title = {Evaluating Strategies for Environmental Sustainability in a Supply Chain of an Emerging Economy}, - author = {Roy, Sanjeeb and Das, Miki and Ali, Syed Mithun and Raihan, Ahmed Shoyeb and Paul, Sanjoy Kumar and Kabir, Golam}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {262}, - pages = {121389}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121389}, - urldate = {2020-04-16}, - abstract = {Due to an increased pressure to be environmentally sustainable, many manufacturing organizations, especially from developing countries like Bangladesh, are attempting to make necessary changes in practices and supply chains. However, those attempts need to be applied strategically with the objective to be both environmentally sustainable and economically viable. This paper offers a decision-making methodology by integrating a fuzzy cognitive map (FCM) and data envelopment analysis (DEA) for evaluating strategies for environmental sustainability based on their impact on the overall supply chain network of an organization. This paper first identifies 18 generic strategies for environmental sustainability and three supply chain performance measurement (PM) factors. Afterwards, the cause-effect relationships among these strategies and PM factors are utilized to capture the complicated relationships by FCM. The extended delta rule (EDR) learning algorithm was used in association with FCM to quantify the impact of those strategies on supply chain PM factors. Finally, DEA is used to prioritize strategies using these impact values. A real-life case using a fast-moving consumer goods (FMCG) manufacturer from Bangladesh is presented to justify the applicability of the proposed methodology. The results reflect the usefulness of this methodology for evaluating strategies for environmental sustainability in a supply chain (SC), specifically in the FMCG sector of an emerging economy. Thus, other manufacturing organizations from any industry can use this methodology to evaluate strategies for environmental sustainability.}, - keywords = {Bangladesh Fast-moving consumer good (FMCG) chain,Data envelopment analysis,Environmental sustainability,Extended delta rule,Fuzzy cognitive map,Learning algorithm} -} - -@article{royEvolutionDrinkingStraws2021, - title = {Evolution of Drinking Straws and Their Environmental, Economic and Societal Implications}, - author = {Roy, Poritosh and Ashton, Lisa and Wang, Tao and Corradini, Maria G. and Fraser, Evan D.G. and Thimmanagari, Mahendra and Tiessan, Mike and Bali, Atul and Saharan, Khurshid M. and Mohanty, Amar K. and Misra, Manjusri}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {316}, - pages = {128234}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128234}, - urldate = {2021-08-11}, - abstract = {Plastic waste has gained global attention due to growing concerns about its impact on human and environmental health. More than 50\% of manufactured plastics are disposed of after single-use, leading to 150 million tons of annual plastic waste worldwide. Although numerous efforts are underway to replace single-use plastic straws with alternative products to reduce environmental pollution, their potential impact on the environment, economy, and society is yet to be analyzed. This study considers plastic straws as an exemplar that captures the evolution of plastic use, its persisting problems, on-going efforts and advances in single-use plastic waste management, and the search for viable alternatives. We use the key principles of sustainability to explore the environmental, economic, and social impacts of different types of straw. In doing this, we contrast how producing drinking straws with (bio)materials could reduce their ecological impact, improve waste management. Additionally, we evaluate alternative approaches that have the potential to include straws within a broader ``circular economy'' strategy. However, alternative ways of producing straws only provide a partial solution. A broader beneficial effect on the environment will only be attained through consumer acceptance and behavioral changes. Any shift to resolve the persisting issues surrounding single-use plastics must be done from a systems approach to sustainability in order to mitigate environmental and economic risks and their rebound effects on the society.}, - keywords = {Biodegradable straw,Consumer behavior,Drinking straw,Economic implications,Environmental impact,Single-use plastic straw} -} - -@techreport{RoyHaines-Young2018, - title = {Common {{International Classification}} of {{Ecosystem Services}} ({{CICES}}) {{V5}}.1 {{Guidance}} on the {{Application}} of the {{Revised Structure}}}, - author = {{Roy Haines-Young}, by and Potschin, Marion}, - year = {2018}, - urldate = {2021-04-13}, - file = {/Users/fabio/Zotero/storage/BQRFVQUE/full-text.pdf} -} - -@article{royoAnalysisParametersUseful, - title = {Analysis of Parameters about Useful Life Extension in 70 Tools and Methods Related to Eco-Design and Circular Economy}, - author = {Royo, Marta and Chulvi, Vicente and Mulet, Elena and {Ruiz-Pastor}, Laura}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13378}, - urldate = {2023-02-09}, - abstract = {One of the approaches followed by the circular economy (CE) to achieve sustainability through design is product life extension. Extending the life of products to make them useful for as long as possible is a means to reduce waste production and materials consumption, as well as the related impacts. For designers, conceptualizing products in a way that allows them to be used for longer is a challenge, and assessing how well they extend their lifespan can be helpful when it comes to choosing the best proposal. In this paper, 70 tools and methods related to eco-design and circular economy are studied to determine how many of them consider parameters related to life extension and which can be applied in the early stages of design. The results of the analysis show that most of the existing tools and methods are applicable to developed products, and only a few of them take into account parameters related to extending the useful life. Of the 70 tools and methods, only 14 include some parameter related to life extension and are applicable to concepts. CE toolkit, Eco-design PILOT, CE Designer, Circularity Assessment tool, Circularity Potential Indicator and Circular Design Tools take into consideration eight or more parameters to assess life extension in concepts. This will help designers select the most appropriate and will indicate the need for more complete tools to consider useful life extension in the early stages of design and thus enhance the selection of more sustainable products.}, - copyright = {\textcopyright{} 2022 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of International Society for Industrial Ecology.}, - langid = {english}, - keywords = {circular economy,conceptual design,eco-design,industrial ecology,product design,useful life extension}, - file = {/Users/fabio/Zotero/storage/D42VAFU7/Royo et al. - Analysis of parameters about useful life extension.pdf;/Users/fabio/Zotero/storage/MEJA6JQ3/jiec.html} -} - -@article{royRedesigningTraditionalLinear2022, - title = {Redesigning Traditional Linear Supply Chains into Circular Supply Chains\textendash{{A}} Study into Its Challenges}, - author = {Roy, Tarun and {Garza-Reyes}, Jose Arturo and Kumar, Vikas and Kumar, Anil and Agrawal, Rohit}, - year = {2022}, - month = may, - journal = {Sustainable Production and Consumption}, - volume = {31}, - pages = {113--126}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.02.004}, - urldate = {2022-03-07}, - abstract = {Transitioning to a Circular Economy (CE) is considered the most promising way to achieve economic and environmental sustainability. However, companies and governments are faced with challenges in redesigning existing linear supply chains (SCs) into circular supply chains (CSCs). Although previous research has tried to identify challenges in the implementation of CE in their own specific contexts, the literature lacks a systematic identification and validation of challenges to transition to circular supply chain management (CSCM). This study identifies the key barriers to the redesign of SCs into CSCs in the global manufacturing sector and develops a broad classification to facilitate their mitigation. An extensive review of the state-of-the-art literature on CSCM identified a list of 20 barriers plaguing manufacturing firms and impeding the transition of their linear SCs into CSCs. The barriers were analysed through 200 responses received from experts in the fields of CE and supply chain management using a questionnaire-based survey. The findings of the study suggest significant restraints towards CSCs implementation owing to the lack of incentives and policies, and product complexity. Moreover, the study of the broadly classified barriers such as standardisation and legal barriers, and financial and economic barriers indicate substantial similarities between the results and findings of the extant literature thereby implying significant alignment between the industry and the academia regarding the subject. This work is useful in formulating strategies to redesign CSCs, and helps researchers and practitioners to understand the challenges in implementing CSCs.}, - keywords = {Barriers,Challenges,Circular economy,Circular supply chain,Closed-loop supply chain,Sustainable manufacturing} -} - -@article{royReviewSystemDynamics2022, - title = {A Review of System Dynamics Modeling for the Sustainability Assessment of Biorefineries}, - author = {Roy, Bidhan Bhuson and Tu, Qingshi}, - year = {2022}, - month = may, - journal = {Journal of Industrial Ecology}, - pages = {1--10}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13291}, - urldate = {2022-05-29}, - abstract = {Bioeconomy has been incorporated into the national strategy for sustainable development by many countries, and the concept of biorefinery has been considered as one of the essential components of such strategies. The environmental, economic, and social implications of a biorefinery hinge upon both the endogenous interactions among its supply chain components and their responses to the exogenous factors. The system dynamics (SD) modeling approach is suitable for understanding such complex systems. This study provides a state-of-the-art review of the methodological assumptions of existing SD studies relevant to the sustainability of biorefineries. Among the reviewed studies, common supply chain components of a biorefinery were feedstock supply, biomass conversion, market demand, distribution, and use of bioproducts. Components of a supply chain are interlinked through feedback loops. For instance, the preference for bioproduct use increases the corresponding market demand, which attracts more investment in biorefineries and changes the supply of feedstock. Exoge-nous variables investigated by the reviewed studies cover the market demand, population growth, GDP change, imposed regulations and incentives to evaluate endoge-nous factors such as the price of biomass and biofuel, change in land-use pattern, and fuel or energy choices of consumers. Through analyzing the methodological assumptions , we also identified several limitations of the models/frameworks in the existing literature, including (1) the lack of a mechanism to represent the complex interactions within the supply chain of a biorefinery with a diverse product portfolio, and (2) the lack of feedback loops incorporating the environmental (e.g., via life cycle assessment), economic (e.g., via techno-economic analysis), and social (e.g., via social life cycle assessment) influences into the interactions among supply chain components. Accordingly, we proposed a recommendation for methodology development to address these limitations .}, - keywords = {bioeconomy,biorefinery,economic analysis,industrial ecology,life cycle assessment,system dynamics,techno} -} - -@article{Roysen2019, - title = {New Normalities in Grassroots Innovations: {{The}} Reconfiguration and Normalization of Social Practices in an Ecovillage}, - author = {Roysen, Rebeca and Mertens, Fr{\'e}d{\'e}ric}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117647}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117647}, - urldate = {2020-05-21}, - abstract = {We use concepts from social practice theories to better understand how grassroots innovators reconfigure their daily practices and create `niches of new normalities'. Through a qualitative study of a specific grassroots organization \textendash{} an ecovillage in Brazil \textendash{} we explore the local dynamics of development and normalization of innovative social practices. We describe the role of meanings, materials and competences in the reconfiguration of practices, and explain how the normalization of sustainable social practices in the ecovillage creates new social norms that encourage members to adopt them and, in turn, engender new circuits of reproduction. We argue for the importance of social norms as a `structural' element influencing the emergence, maintenance, and development of social practices.}, - keywords = {Ecovillages,Grassroots innovation,Social norms,Social practice theories,Sustainability transitions} -} - -@article{Ruffin2020, - title = {{{EU}} Science Diplomacy in a Contested Space of Multi-Level Governance: {{Ambitions}}, Constraints and Options for Action}, - author = {R{\"u}ffin, Nicolas}, - year = {2020}, - month = feb, - journal = {Research Policy}, - volume = {49}, - number = {1}, - pages = {103842}, - issn = {00487333}, - doi = {10.1016/j.respol.2019.103842} -} - -@article{rufi-salisCombiningLCACircularity2021, - title = {Combining {{LCA}} and Circularity Assessments in Complex Production Systems: The Case of Urban Agriculture}, - shorttitle = {Combining {{LCA}} and Circularity Assessments in Complex Production Systems}, - author = {{Ruf{\'i}-Sal{\'i}s}, Mart{\'i} and {Petit-Boix}, Anna and Villalba, Gara and Gabarrell, Xavier and Leipold, Sina}, - year = {2021}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {166}, - pages = {105359}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2020.105359}, - urldate = {2022-10-07}, - abstract = {Local food production through urban agriculture (UA) is promoted as a means to make cities more sustainable. However, UA does not come free of environmental impacts. In this sense, optimizing urban resources through circular economy principles offers the opportunity to close loops and improve production systems, but an assessment of these systems through a combination of circularity and environmental tools is missing from the literature. The goal of our study is to analyse the environmental and circularity performance of applying circular strategies in UA systems. We use Life Cycle Assessment (LCA) and the Material Circularity Indicator (MCI) to assess the baseline scenario of a Mediterranean rooftop greenhouse and the application of 13 circular strategies. The results show that the MCI score for all strategies was biased by overweighting of the water subsystem in the mass balance. Based on this finding, we propose a series of modifications to the circularity assessment, calculating specific MCI scores for every subsystem before coupling them with environmental life cycle indicators. The outcome is a set of indicators that use the Linear Flow Index (LFI), where decreasing the values as much as possible will correspond to a decrease both in environmental impact and linearity of the system (the inverse of circularity). The use of these indicators provides a simple understanding of the circular and environmental performance of these systems while being fully adaptable. With these indicators, the uses of nutrient recirculation, struvite fertilizer or recycled materials were the best strategies to improve urban agriculture.}, - langid = {english}, - keywords = {Circular economy,Circularity Indicators,Industrial ecology,Life Cycle Assessment,Urban agriculture,Urban metabolism}, - file = {/Users/fabio/Zotero/storage/UVVJ4LD5/Rufí-Salís et al_2021_Combining LCA and circularity assessments in complex production systems.pdf;/Users/fabio/Zotero/storage/EJVM4J77/S0921344920306741.html} -} - -@article{Rugani2019, - title = {Towards Integrating the Ecosystem Services Cascade Framework within the {{Life Cycle Assessment}} ({{LCA}}) Cause-Effect Methodology}, - author = {Rugani, Benedetto and {Maia de Souza}, Danielle and Weidema, Bo P and Bare, Jane and Bakshi, Bhavik and Grann, Blane and Johnston, John M and Pavan, Ana Laura Raymundo and Liu, Xinyu and Laurent, Alexis and Verones, Francesca}, - year = {2019}, - journal = {Science of the Total Environment}, - volume = {690}, - pages = {1284--1298}, - issn = {18791026}, - doi = {10.1016/j.scitotenv.2019.07.023}, - urldate = {2021-09-20}, - abstract = {The assessment of ecosystem services (ES) is covered in a fragmented manner by environmental decision support tools that provide information about the potential environmental impacts of supply chains and their products, such as the well-known Life Cycle Assessment (LCA) methodology. Within the flagship project of the Life Cycle Initiative (hosted by UN Environment), aiming at global guidance for life cycle impact assessment (LCIA) indicators, a dedicated subtask force was constituted to consolidate the evaluation of ES in LCA. As one of the outcomes of this subtask force, this paper describes the progress towards consensus building in the LCA domain concerning the assessment of anthropogenic impacts on ecosystems and their associated services for human well-being. To this end, the traditional LCIA structure, which represents the cause-effect chain from stressor to impacts and damages, is re-casted and expanded using the lens of the ES `cascade model'. This links changes in ecosystem structure and function to changes in human well-being, while LCIA links the effect of changes on ecosystems due to human impacts (e.g. land use change, eutrophication, freshwater depletion) to the increase or decrease in the quality and/or quantity of supplied ES. The proposed cascade modelling framework complements traditional LCIA with information about the externalities associated with the supply and demand of ES, for which the overall cost-benefit result might be either negative (i.e. detrimental impact on the ES provision) or positive (i.e. increase of ES provision). In so doing, the framework introduces into traditional LCIA the notion of ``benefit'' (in the form of ES supply flows and ecosystems' capacity to generate services) which balances the quantified environmental intervention flows and related impacts (in the form of ES demands) that are typically considered in LCA. Recommendations are eventually provided to further address current gaps in the analysis of ES within the LCA methodology.}, - pmid = {31470491}, - keywords = {benefit,cascade model,cause-effect chain,ecosystem services,life cycle assessment (LCA),valuation}, - file = {/Users/fabio/Zotero/storage/LGLFZGV4/full-text.pdf} -} - -@article{Rumpala2020, - title = {The Dynamics and Conditions of Material Forms of `Commons-Based Peer Production'. {{Towards}} a Reappropriation of Living Conditions?}, - author = {Rumpala, Yannick}, - year = {2020}, - month = oct, - journal = {Review of Social Economy}, - pages = {1--29}, - issn = {0034-6764}, - doi = {10.1080/00346764.2020.1828612}, - urldate = {2020-10-31}, - file = {/Users/fabio/Zotero/storage/7X939SGJ/full-text.pdf} -} - -@article{ruppIndustryTechnologicalOrientedDefinition2021, - title = {Industry 4.0: {{A Technological-Oriented Definition Based}} on {{Bibliometric Analysis}} and {{Literature Review}}}, - author = {Rupp, Mario and Schneckenburger, Max and Merkel, Markus and B{\"o}rret, Rainer and Harrison, David K.}, - year = {2021}, - month = feb, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {7}, - number = {1}, - pages = {68}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2199-8531}, - doi = {10.3390/joitmc7010068}, - urldate = {2021-03-08}, - abstract = {{$<$}p{$>$}Industry 4.0 was introduced in 2011 and since then has been perceived in multiple ways such as a vision, a paradigm, a scenario or as a digital revolution in production and service organizations. Even though Industry 4.0 is associated with great improvements for companies, there is still a lack of a uniform definition of the term Industry 4.0, especially when it comes to the transfer of knowledge from theoretical research to the implementation in organizations, which leads to confusion and disaffirmation. The lack of a clear structure and a holistic definition of the research topic Industry 4.0 inhibits the development of new business areas and new research approaches. To target this fundamental gap, a methodology is developed and the 338 most relevant publications are analyzed in the database of ScienceDirect starting from 2015. Based on those publications, the field of Industry 4.0 is structured. A consistent and comprehensive definition for Industry 4.0 is introduced by using a bibliometric analysis. Therefore, existing descriptions are decomposed into word fragments and analyzed. It is shown that this novel approach to find a definition for the term ``Industry 4.0'' does not yet exist. The aim is to provide a purely objective definition based on a statistical evaluation, without restricting the selection of publications to a specific research or business area. Based on those data, a new and ubiquitous definition of Industry 4.0 is formed, discussed and validated on practical examples.{$<$}/p{$>$}}, - keywords = {bibliometric analysis,definition,Industrie 40,literature review,technology}, - file = {/Users/fabio/Zotero/storage/4QHVKUBN/full-text.pdf} -} - -@article{Rus2015, - title = {Coworking: {{A}} Community of Work}, - author = {Rus, Andrej and Orel, Marko}, - year = {2015}, - journal = {Teorija in Praksa}, - volume = {52}, - number = {6}, - pages = {1017--1038}, - issn = {00403598}, - abstract = {The number of coworking spaces and the number of people who choose to work in them has exploded over the past few years, with numbers expected to double every year. What is fuelling this growth and where is the demand for coworking coming from? We tried to address this question by looking at the specific needs of the rising creative class, identifying their urgent need for uninhibited sharing of information, knowledge, ideas and also material resources. We argue that coworking spaces are favoured by the creative class, because they offer a community of work which facilitates the culture of sharing. To illustrate what it takes to establish such a community of work, we present a case study of the Creative Centre Poligon which suggests that community building is a multi-step process that needs careful management and plenty of time. We conclude that policy makers should not focus on building coworking spaces in order to combat youth unemployment but should rather support existing initiatives that have been built or are in the process of building up vibrant communities of work.}, - keywords = {Co-creation,Collaborative space,Coworking} -} - -@article{Rusenberg2014, - title = {A {{Method}} to {{Characterize}} the {{Quality}} of a {{Polymer Laser Sintering Process}}}, - author = {R{\"u}senberg, Stefan and Josupeit, Stefan and Schmid, Hans-Joachim}, - year = {2014}, - month = feb, - journal = {Advances in Mechanical Engineering}, - volume = {2014}, - pages = {1--10}, - issn = {1687-8132}, - doi = {10.1155/2014/185374}, - isbn = {1687-8132}, - file = {/Users/fabio/Zotero/storage/RBIXGP9S/Rüsenberg, Josupeit, Schmid - 2014 - A Method to Characterize the Quality of a Polymer Laser Sintering Process.pdf} -} - -@inproceedings{Russell2012, - title = {Low-Cost, Rapid Prototyping of {{IMU}} and Pressure Monitoring System Using an Open Source Hardware Design}, - booktitle = {2012 {{IEEE}} Int. {{Instrum}}. {{Meas}}. {{Technol}}. {{Conf}}. {{Proc}}.}, - author = {Russell, Luke and Steele, Alan L. and Goubran, Rafik}, - year = {2012}, - month = may, - pages = {2695--2699}, - publisher = {{IEEE}}, - doi = {10.1109/I2MTC.2012.6229719}, - isbn = {978-1-4577-1772-7} -} - -@article{Russell2019, - title = {{{NASA}}'s {{Plans}} for {{Development}} of a {{Standard}} for {{Additively Manufactured Components}}}, - author = {Russell, Richard}, - year = {2019}, - month = apr, - journal = {Journal of Materials Engineering and Performance}, - volume = {28}, - number = {4}, - pages = {1924--1928}, - issn = {1059-9495}, - doi = {10.1007/s11665-019-03939-x} -} - -@article{russellGettingBallRolling2020, - title = {Getting the Ball Rolling: An Exploration of the Drivers and Barriers towards the Implementation of Bottom-up Circular Economy Initiatives in {{Amsterdam}} and {{Rotterdam}}}, - author = {Russell, Max and Gianoli, Alberto and Grafakos, Stelios}, - year = {2020}, - month = sep, - journal = {Journal of Environmental Planning and Management}, - volume = {63}, - number = {11}, - pages = {1903--1926}, - publisher = {{Routledge}}, - issn = {13600559}, - doi = {10.1080/09640568.2019.1690435}, - urldate = {2022-03-13}, - abstract = {The notion of Circular Economy is often presented as a more sustainable alternative to a `linear' economic system. However, there is a distinct gap in the academic literature surrounding the concept, particularly in terms of implementation. This article provides an initial exploration into critical factors influencing the process of implementation by studying 12 bottom-up CE initiatives in the two Dutch cities of Amsterdam and Rotterdam. In-depth semi-structured interviews were conducted with key stakeholder(s) for each initiative in order to identify the perceived importance of the critical factors. In total, 18 critical factors were identified, grouped into 5 overarching categories: financial, institutional, policy and regulatory, technology and knowledge, and social. The analysis shows that the critical factors identified do not act in isolation, and form a complex web of interconnecting critical factors. Furthermore, it illustrates how certain critical factors are of significant influence at particular stages throughout the process of implementation.}, - keywords = {circular economy implementation barriers,circular economy implementation drivers,transition to circular economy,urban circular economic systems} -} - -@article{russellMatterTimingSystem2022, - title = {A Matter of Timing: {{System}} Requirements for Repair and Their Temporal Dimensions}, - author = {Russell, Jennifer D and {Svensson-Hoglund}, Sahra and Luth Richter, Jessika and Dalhammar, Carl and Milios, Leonidas and Jennifer Russell, Correspondence D}, - year = {2022}, - month = may, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13280}, - urldate = {2022-05-29}, - abstract = {Research into repair within the circular economy (CE) typically focuses on technical aspects of design, policy, and markets, and often assumes simplified conditions for the user/owner and the product system to explain the barriers to scaling repair activities. However, factors occurring at pre-use stages of the product's life cycle can significantly influence whether, and to what extent, repair is viable or possible, that is, warranty duration, after-sale service provision, and access to necessities. The passing of time can directly and indirectly affect the ability, difficulty, and thus, the likelihood of repair activities being performed at each stage of the product's life cycle. Drawing from the literature and applying inductive systems-thinking tools, we propose a framework for considering the "System of Repairability." We delineate how the passing of time (tem-poral dimensions) affects one's ''ability to repair,'' as a product progresses through different life cycle phases (i.e., breakdown vs. repair vs. disposal), and the point(s) at which the repair is considered or attempted (i.e., year of usage). By integrating life cycle and temporal (time-based) dimensions into a broad System of Repairability framework, we clarify relevant interconnections, iterations, sequences, and timing of decision points, stakeholders, and necessary conditions to facilitate an outcome of successful repair at the individual level, and thus intervention strategies for scaling repair within CE. We discuss how a policy mix can address the life cycle of products and the repair system more holistically. We conclude with a future outlook on how temporal dimensions can inform policy strategies and future research. K E Y W O R D S circular economy, industrial ecology, life cycle thinking, repair, systems thinking, temporal dimensions This is an open access article under the terms of the Creative Commons Attribution-NonCommercial-NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.}, - keywords = {circular economy,industrial ecology,life cycle thinking,repair,systems thinking,temporal dimensions}, - file = {/Users/fabio/Zotero/storage/K59HVY2H/full-text.pdf} -} - -@article{Russo2019, - title = {From Trash to Treasure: {{The}} Impact of Consumer Perception of Bio-Waste Products in Closed-Loop Supply Chains}, - author = {Russo, Ivan and Confente, Ilenia and Scarpi, Daniele and Hazen, Benjamin T.}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {218}, - pages = {966--974}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.044}, - file = {/Users/fabio/Zotero/storage/Y9ZI8SIX/From trash to treasure- The impact of consumer perception of bio-waste products in closed-loop supply chains.pdf} -} - -@article{Rust2019, - title = {The Future of Marketing}, - author = {Rust, Roland T.}, - year = {2019}, - month = aug, - journal = {International Journal of Research in Marketing}, - issn = {01678116}, - doi = {10.1016/j.ijresmar.2019.08.002} -} - -@phdthesis{Rutot2004, - title = {Les ( Bio ) Polym\`eres Biod\'egradables : l ' Enjeu de Demain ?}, - author = {Rutot, Delphine and Dubois, Philippe}, - year = {2004}, - journal = {Service de Mat\'eriaux Pl}, - school = {Universit\'e de Mons-Hainaut}, - file = {/Users/fabio/Zotero/storage/5XQSQHV3/Les ( bio ) polymères biodégradables l ’ enjeu de demain.pdf} -} - -@article{Ryberg2019, - title = {Global Environmental Losses of Plastics across Their Value Chains}, - author = {Ryberg, Morten W. and Hauschild, Michael Z. and Wang, Feng and {Averous-Monnery}, Sandra and Laurent, Alexis}, - year = {2019}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {151}, - pages = {104459}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104459}, - file = {/Users/fabio/Zotero/storage/RX3ZMGC5/Global environmental losses of plastics across their value chains.pdf} -} - -@article{rybergAbsoluteEnvironmentalSustainability2021, - title = {Absolute Environmental Sustainability Assessment of a {{Danish}} Utility Company Relative to the {{Planetary Boundaries}}}, - author = {Ryberg, Morten W. and Bjerre, Troels K. and Nielsen, Per Henrik and Hauschild, Michael}, - year = {2021}, - month = jun, - journal = {Journal of Industrial Ecology}, - volume = {25}, - number = {3}, - pages = {765--777}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13075}, - urldate = {2022-01-25}, - abstract = {Increasing environmental pressure from production and consumption of products and services is starting to affect Earth System stability. Thus, the Planetary Boundaries framework introduced a set of absolute boundaries for keeping the Earth System stable and delimiting a safe operating space for humanity. The sum of environmental pressures associated with human activities should not exceed the safe operating space. This includes utility companies whose activities relate to supply of water and treatment of waste- and stormwater. This study conducted an absolute environmental sustainability assessment (AESA) of a Danish utility company to evaluate if it could be considered absolutely sustainable relative to an assigned share of the safe operating space (SoSOS). The AESA evaluated the company's impacts relative to an assigned share of the Planetary Boundaries and relative to specific local boundaries for nitrogen and phosphorous emissions. Results showed that the assigned SoSOS was exceeded for 10 of 18 impact categories, for example, climate related boundaries were exceeded by up to a factor 7.8 while local nitrogen and phosphorus boundaries were exceeded by ca. a factor 16. The AESA can indicate to which degree the company exceeds its assigned SoSOS for certain impact categories and the processes and life-cycle stages to focus on to become absolutely sustainable. This information is crucial for deriving specific impact reduction targets as part of environmental strategies for companies to become sustainable in an absolute sense.}, - keywords = {absolute sustainability,cycle assessment (LCA),cycle impact assessment wastewater,industrial ecology,life,Planetary Boundaries (PB),water supply}, - file = {/Users/fabio/Zotero/storage/4E69542S/full-text.pdf} -} - -@article{Rylands2016, - title = {The Adoption Process and Impact of Additive Manufacturing on Manufacturing Systems}, - author = {Rylands, Brogan and B{\"o}hme, Tillmann and Gorkin, Robertiii and Fan, Joshua and Birtchnell, Thomas}, - year = {2016}, - journal = {Journal of Manufacturing Technology Management}, - volume = {27}, - number = {7}, - pages = {969--989}, - issn = {1741038X}, - doi = {10.1108/JMTM-12-2015-0117}, - abstract = {Purpose - Company pressure for manufacturers is mounting from two angles: Increasing pressure of global competition, and rapid advancements in technology such as additive manufacturing (AM) that are altering the way that goods are manufactured. The purpose of this paper is to explore the adoption process of AM within a manufacturing system and its business impact. Design/methodology/approach - Research was conducted to collect empirical data at two manufacturing case companies in the North West England. Both cases are located in areas of industrial recovery using AM engineering innovation for value creation. Findings - Early findings showed that the implementation of AM caused a shift in value propositions and the creation of additional value streams (VSs) for the case study companies. AM was shown to compliment and strengthen traditional manufacturing VSs rather than replacing them. Research limitations/implications - Limitations include the generalizability due to the number and location of case companies included in this research. Practical implications - It is worthwhile to explore the opportunities that AM brings with the existing customer base as it has the potential to add unexplored and untapped value. However, managers need to be mindful of the capability and resources required to put the VS into practice. Social implications - Both cases resulted in skill retainment and development due to the implementation of AM. Hence, the innovation contributed to regional economic recovery and business survival. Originality/value - This empirical research is one of the early field explorations focussing on the impact of AM on VS structures. Hence, this paper contributes to the area of technology enhanced manufacturing systems.}, - keywords = {3D printing,Additive manufacturing,Innovation,Supply chains,Value stream}, - file = {/Users/fabio/Zotero/storage/UC6KG9ZB/The adoption process and impact of additive manufacturing on manufacturingsystems.pdf} -} - -@article{Rymansaib2016, - title = {All-{{Polystyrene 3D-Printed Electrochemical Device}} with {{Embedded Carbon Nanofiber-Graphite-Polystyrene Composite Conductor}}}, - author = {Rymansaib, Zuhayr and Iravani, Pejman and Emslie, Edward and {Medvidovi{\'c}-Kosanovi{\'c}}, Martina and {Sak-Bosnar}, Milan and Verdejo, Raquel and Marken, Frank}, - year = {2016}, - journal = {Electroanalysis}, - volume = {28}, - number = {7}, - pages = {1517--1523}, - issn = {15214109}, - doi = {10.1002/elan.201600017}, - abstract = {Carbon nanofibres (CNFs) and graphite flake microparticles were added to thermoplastic polystyrene polymer with the aim of making new conductive blends suitable for 3D-printing. Various polymer/carbon blends were evaluated for suitability as printable, electroactive material. An electrically conducting polystyrene composite was developed and used with commercially available polystyrene (HIPS) to manufacture electrodes suitable for electrochemical experiments. Electrodes were produced and evaluated for cyclic voltammetry of aqueous 1,1'-ferrocenedimethanol and differential pulse voltammetry detection of aqueous Pb2+ via anodic stripping. A polystyrene/CNF/graphite (80/10/10 wt\%) composite provides good conductivity and a stable electrochemical interface with well-defined active geometric surface area. The printed electrodes form a stable interface to the polystyrene shell, give good signal to background voltammetric responses, and are reusable after polishing. \textcopyright{} 2016 WILEY-VCH Verlag GmbH \& Co. KGaA, Weinheim}, - keywords = {device prototyping,manufacturing,polymer formulation,sensor architecture,trace analysis} -} - -@article{ryterAssessingRecyclingDisplacement2022, - title = {Assessing Recycling, Displacement, and Environmental Impacts Using an Economics-Informed Material System Model}, - author = {Ryter, John and Fu, Xinkai and Bhuwalka, Karan and Roth, Richard and Olivetti, Elsa}, - year = {2022}, - journal = {Journal of Industrial Ecology}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13239}, - urldate = {2022-03-06}, - abstract = {Material production drives an increasingly large fraction of CO2-equivalent emissions. Material efficiency strategies such as recycling serve to reduce these emissions. Current analyses of the effectiveness of such strategies do not include economically induced rebound effects, overestimating the associated environmental benefits. We present a dynamic supply chain simulation model for copper through 2040 incorporating inventory-driven price evolution, dynamic material flow analysis, and life cycle assessment alongside mine-level economic evaluation of opening, closing, and production decisions. We show that permanent increases in recycling displace {$\sim$}0.5 kilotonnes mine production per kilotonne increase in scrap supply on average, while short-lived recycling policies can lead to increased mine production. We find evidence for supply chain evolution pathways minimizing the rebound effect and maximizing displacement of primary material, where increasing refined copper and concentrate prices and decreasing demand serve to decrease mining. However, even in best-case scrap supply scenarios, CO2e emissions from the copper sector increase 25\% by 2040 relative to 2018 due to demand growth, ore grade decline, and lower displacement among large scrap supply changes. With implementation of best available technologies across all supply chain components, we estimated 2040 CO2e emissions 10\% below those of 2018 are possible, though still well short of 2\textdegree C emissions targets. We find increasing mine taxes and royalties, reclamation costs, and exploration costs further increase displacement, as does the inclusion of scrap prices on major futures exchanges. These results highlight the importance of considering the economics of the entire material supply chain when implementing material efficiency strategies. This article met the requirements for a Gold-Gold JIE data openness badge described at http://jie.click/badges.}, - keywords = {driven price formation,industrial ecology,inventory,life cycle assessment,material efficiency,material system modeling,recycling economics}, - file = {/Users/fabio/Zotero/storage/LGIQGAZ9/full-text.pdf} -} - -@article{Saade2020, - title = {How Has {{LCA}} Been Applied to {{3D}} Printing? {{A}} Systematic Literature Review and Recommendations for Future Studies}, - author = {Saade, Marcella Ruschi Mendes and Yahia, Ammar and Amor, Ben}, - year = {2020}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {244}, - pages = {118803}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118803}, - urldate = {2021-11-22}, - abstract = {Previously perceived as a rapid prototyping technique, additive manufacturing (AM) has evolved into a fully developed manufacturing process, with growing accessibility to different industrial sectors. Its technological and economic advantages are frequently documented, but AM's environmental performance is seldom investigated. Not long ago discrete initiatives to assess AM's applicability for building large-scale structures started to arise. Mostly focused on technical and economic feasibility, these studies pave the way for the process's consolidation in the construction sector. This paper aims to systematically and critically assess the available literature on AM's life cycle environmental impacts and to identify the main challenges and trends on loads measurements. The findings help feed recommendations to perform life cycle assessments (LCA) in AM initiatives, with a special focus on the construction sector. A systematic search led to the careful analysis of 52 papers, out of 353 that matched our search protocol. In terms of LCA methods' robustness, a lack of transparency stood out in many papers, suggesting that authors were most likely non-LCA experts, applying the tool without much knowledge of requirements and modelling intricacies. In terms of documented global warming potential (GWP) values in comparison to conventional manufacturing (CM), AM processes were portrayed as beneficial in most cases. Most papers documented results ranges, which represented different printing, production or distribution strategies, in which AM's performance varied considerably. LCA played a significant role in finding an optimum production approach and seems to be a valuable lens to assure 3D printing's environmental competitiveness. A contribution analysis showed that there is a shift between materials vs. production processes contribution in the life cycle GWP loads of systems manufactured with AM and CM. 3D printing processes account for almost 80\% of AM's total GWP, while for CM that position is held by the material-related loads. For construction related AM processes, the material intensity is, however, still by far the largest contributor to building systems' GWP, maintaining the impact distribution as in typical manufacturing processes.}, - keywords = {3D printing,Additive manufacturing,Construction,Global warming potential,Life cycle assessment,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/UCC8WUW3/Ruschi et al. - 2019 - How has LCA been applied to 3D printing A systematic literature review and recommendations for future studies.pdf} -} - -@article{Saarikoski2018, - title = {Institutional Challenges in Putting Ecosystem Service Knowledge in Practice}, - author = {Saarikoski, Heli and Primmer, Eeva and Saarela, Sanna Riikka and Antunes, Paula and Aszal{\'o}s, R{\'e}ka and Bar{\'o}, Francesc and Berry, Pam and Blanko, Gemma Garcia and {Gom{\'e}z-Baggethun}, Erik and Carvalho, Laurence and Dick, Jan and Dunford, Robert and Hanzu, Mihail and Harrison, Paula A. and Izakovicova, Zita and Kert{\'e}sz, Mikl{\'o}s and Kopperoinen, Leena and K{\"o}hler, Berit and Langemeyer, Johannes and Lapola, David and Liquete, Camino and Luque, Sandra and Mederly, Peter and Niemel{\"a}, Jari and Palomo, Ignacio and Pastur, Guillermo Martinez and Peri, Pablo Luis and Preda, Elena and Priess, J{\"o}rg A. and Santos, Rui and Schleyer, Christian and Turkelboom, Francis and Vadineanu, Angheluta and Verheyden, Wim and Vikstr{\"o}m, Suvi and Young, Juliette}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - number = {July 2017}, - pages = {579--598}, - publisher = {{The Authors}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.07.019}, - abstract = {The promise that ecosystem service assessments will contribute to better decision-making is not yet proven. We analyse how knowledge on ecosystem services is actually used to inform land and water management in 22 case studies covering different social-ecological systems in European and Latin American countries. None of the case studies reported instrumental use of knowledge in a sense that ecosystem service knowledge would have served as an impartial arbiter between policy options. Yet, in most cases, there was some evidence of conceptual learning as a result of close interaction between researchers, practitioners and stakeholders. We observed several factors that constrained knowledge uptake, including competing interests and political agendas, scientific disputes, professional norms and competencies, and lack of vertical and horizontal integration. Ecosystem knowledge played a small role particularly in those planning and policy-making situations where it challenged established interests and the current distribution of benefits from ecosystems. The factors that facilitated knowledge use included application of transparent participatory methods, social capital, policy champions and clear synergies between ecosystem services and human well-being. The results are aligned with previous studies which have emphasized the importance of building local capacity, ownership and trust for the long-term success of ecosystem service research.}, - file = {/Users/fabio/Zotero/storage/VF6NWX5W/Institutional-challenges-in-putting-ecosystem-service-kno_2018_Ecosystem-Ser.pdf} -} - -@article{Sabbaghi2017, - title = {Environmental {{Evaluation}} of {{Product Design Alternatives}}: {{The Role}} of {{Consumer}}'s {{Repair Behavior}} and {{Deterioration}} of {{Critical Components}}}, - author = {Sabbaghi, Mostafa and Behdad, Sara}, - year = {2017}, - month = aug, - journal = {Journal of Mechanical Design, Transactions of the ASME}, - volume = {139}, - number = {8}, - publisher = {{American Society of Mechanical Engineers (ASME)}}, - issn = {10500472}, - doi = {10.1115/1.4036777}, - urldate = {2020-05-10}, - abstract = {Consumers might be willing to repair their broken devices as long as the associated repair costs do not exceed an undesirable threshold. However, in many cases, the technological obsolescence actuates consumers to retire old devices and replace them with new ones rather than extending the product lifecycle through repair. In this paper, we aim to investigate the impact of components' deterioration profiles and consumers' repair decisions on the lifespan of devices, and then assesse the anticipated life cycle environmental impacts. A Monte Carlo simulation is developed to estimate the life cycle characteristics such as the average lifespan, the number of failed components' replacement, and the total repair cost per cycle for a laptop computer. The lifecycle characteristics estimated from simulation model further have been used in a life cycle assessment (LCA) study to quantify the environmental impact associated with different design scenarios. The results reveal the impact of product design as well as consumers' repair decisions on the product lifespan and the corresponding environmental impacts.}, - file = {/Users/fabio/Zotero/storage/VVZI2SEA/full-text.pdf} -} - -@article{sabelHistoricalAlternativesMass1985, - title = {Historical {{Alternatives}} to {{Mass Production}}: {{Politics}}, {{Markets}} and {{Technology}} in {{Nineteenth-Century Industrialization}}}, - shorttitle = {Historical {{Alternatives}} to {{Mass Production}}}, - author = {Sabel, Charles and Zeitlin, Jonathan}, - year = {1985}, - journal = {Past \& Present}, - number = {108}, - eprint = {650576}, - eprinttype = {jstor}, - pages = {133--176}, - publisher = {{[Oxford University Press, The Past and Present Society]}}, - issn = {0031-2746}, - urldate = {2022-08-14}, - file = {/Users/fabio/Zotero/storage/JDFKASPX/Sabel_Zeitlin_1985_Historical Alternatives to Mass Production.pdf} -} - -@article{Saberianpour2018, - title = {Tissue Engineering Strategies for the Induction of Angiogenesis Using Biomaterials}, - author = {Saberianpour, Shirin and Heidarzadeh, Morteza and Geranmayeh, Mohammad Hossein and Hosseinkhani, Hossein and Rahbarghazi, Reza and Nouri, Mohammad}, - year = {2018}, - month = dec, - journal = {Journal of Biological Engineering}, - volume = {12}, - number = {1}, - pages = {36}, - issn = {1754-1611}, - doi = {10.1186/s13036-018-0133-4} -} - -@article{saberianRecyclingSpentCoffee2021, - title = {Recycling of Spent Coffee Grounds in Construction Materials: {{A}} Review}, - author = {Saberian, Mohammad and Li, Jie and Donnoli, Anita and Bonderenko, Ethan and Oliva, Paolo and Gill, Bailey and Lockrey, Simon and Siddique, Rafat}, - year = {2021}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {289}, - pages = {125837}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.125837}, - urldate = {2021-01-13}, - abstract = {Coffee, the second most traded commodity and the second-largest beverage consumed around the world, is responsible for many environmental burdens in the form of spent coffee grounds (SCGs), a by-product from the brewing process of coffee. On the other hand, the carbon footprints and environmental impacts related to construction projects are very concerning. Therefore, researchers and industries have recently tried to move towards green construction practices. This paper presents an overview of utilisation of SCGs, as a promising green biowaste source, in the civil and construction industry. From the literature review conducted, it can be concluded that SCGs have potential use as aggregates in construction materials across a broad range of civil engineering applications. However, limited research and lack of evidence of successful practical applications in the field mean further comprehensive studies in this specific area is required.}, - keywords = {Civil engineering applications,Coffee,Lightweight,Spent coffee grounds,Sustainable development,Waste utilisation} -} - -@article{Sabre2013, - title = {Plans d ' Exp\'eriences {{M\'ethode}} de {{Taguchi}}}, - author = {Sabre, Rachid}, - year = {2007}, - journal = {Techniques de l'ingenieur}, - file = {/Users/fabio/Zotero/storage/FDW4DEYW/Plans d ’ expériences Méthode de Taguchi.pdf} -} - -@article{Sachs1990, - title = {Three-Dimensional Printing: Rapid Tooling and Prototypes Directly Form a {{CAD}} Model}, - author = {Sachs, E. and Cima, M. and Cornie, J.}, - year = {1990}, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {39}, - number = {1}, - pages = {201--204}, - issn = {0007-8506}, - doi = {http://dx.doi.org/10.1016/S0007-8506(07)61035-X}, - abstract = {Summary Three Dimensional Printing is a process for the manufacture of tooling and functional prototype parts directly from computer models. Three Dimensional Printing functions by the deposition of powdered material in layers and the selective binding of the powder by ``ink-jet'' printing of a binder material. Following the sequential application of layers, the unbound powder is removed, resulting in a complex three-dimensional part. The process may be applied to the production of metal, ceramic, and metal/ceramic composite parts. An experiment employing continuous-jet ink-jet printing technology has produced a three-dimensional part comprising eight intersecting planes spaced 0.375 inches apart. Future research will be directed toward the direct fabrication of cores and shells for metal casting, and toward the fabrication of porous ceramic preforms for metal-ceramic composite parts.}, - keywords = {Three dimensional printing rapid prototyping rapid}, - file = {/Users/fabio/Zotero/storage/PLNX8RTW/Sachs, Cima, Cornie - 1990 - Three-dimensional printing rapid tooling and prototypes directly form a CAD model.pdf} -} - -@article{Sachs1993, - title = {Three-{{Dimensional Printing}}: {{The Physics}} and {{Implications}} of {{Additive Manufacturing}}}, - author = {Sachs, Emanuel and Cima, Michael and Cornie, James and Brancazio, David and Bredt, Jim and Curodeau, Alain and Fan, Tailin and Khanuja, Satbir and Lauder, Alan and Lee, John and Michaels, Steve}, - year = {1993}, - month = jan, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {42}, - number = {1}, - pages = {257--260}, - issn = {00078506}, - doi = {10.1016/S0007-8506(07)62438-X}, - abstract = {Three Dimensional Printing is a process for creating parts directly from a computer model. 3D Printing builds parts in layers by spreading a layer of powder and then selectively joining the powder in the layer by ink-jet printing of a binder material. After all layers are printed, the layer loose of powder is removed to reveal the finished part. Application areas include ceramic molds for metal castings, directly printed parts for end-use and for use as tooling, ceramic preforms for metal matrix composites, structural ceramic parts, and others. 3D Printing is a member of a group of layer manufacturing techniques which have the primary distinguishing feature of creating parts by the controlled addition (rather than subtraction) of material. The primitive building element in 3D Printing is a spherical ensemble of powder particles held together by one droplet of binder. Ballistic effects are important in the formation of primitives due to kinetic energy associated with the incoming droplet. Stitching together of droplets forms surfaces and hence determines surface finish. Vertical dimensional control is determined in pan by the compression of powder layers by subsequently applied powder. These physical mechanisms help to determine the dimensional control and surface finish of 3D Printed parts. ?? 1993 CIRP.}, - isbn = {00078506}, - keywords = {castings,ceramics,computer aided design (CAD),metals and alloys,toolmaking}, - file = {/Users/fabio/Zotero/storage/9F5U8HIV/Sachs et al. - 1993 - Three-Dimensional Printing The Physics and Implications of Additive Manufacturing.pdf} -} - -@article{Sachs1998, - title = {The Distributed Design and Fabrication of Metal Parts and Tooling by {{3D Printing}}}, - author = {Sachs, Emanuel and Patrikalakis, Nm and Boning, D. and Cima, Mj and Jackson, Tr and Resnick, Ralph}, - year = {1998}, - journal = {Proceedings of the 1998 NSF Design and Manufacturing Grantees Conference, Cintermex Conference Center, Monterrey, Mexico}, - pages = {35--36}, - file = {/Users/fabio/Zotero/storage/9KA3HFX2/m-api-22a10c33-fb0a-d9c5-12dc-d16c9acc7ff3.pdf} -} - -@article{Sadat-Shojai2011, - title = {Recycling of {{PVC}} Wastes}, - author = {{Sadat-Shojai}, Mehdi and Bakhshandeh, Gholam Reza}, - year = {2011}, - journal = {Polymer Degradation and Stability}, - volume = {96}, - number = {4}, - pages = {404--415}, - publisher = {{Elsevier Ltd}}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2010.12.001}, - abstract = {PVC is a universal polymer which can be processed into a wide variety of short-life or long-life products. As a result of increasing consumption of PVC-made products in recent years, the quantity of used PVC items entering the waste stream is gradually increased. Currently, there is a considerable public concern about the problem of plastic wastes, from which PVC has not escaped and the material or energy recycling may be a suitable way to overcome this problem. This review considers the various aspects of the PVC recycling such as recycling methods of PVC, special problems about some proposed processes, separation techniques, and recycling of mixed PVC wastes. In addition, an attempt is made to portray the current status of PVC recycling, the most recent technologies of recycling, and some recent scientific research in the field. ?? 2010 Elsevier Ltd. All rights reserved.}, - isbn = {01413910}, - keywords = {Mixed plastic wastes,Polyvinyl chloride (PVC),Recycling,Separation techniques}, - file = {/Users/fabio/Zotero/storage/9WFPLQ6P/Sadat-Shojai, Bakhshandeh - 2011 - Recycling of PVC wastes.pdf} -} - -@article{sadhukhanMathematicsLifeCycle2021, - title = {The {{Mathematics}} of {{Life Cycle Sustainability Assessment}}}, - author = {Sadhukhan, Jhuma and Sen, Sohum and Gadkari, Siddharth}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {127457}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127457}, - urldate = {2021-05-17} -} - -@article{Safai2019, - title = {A Review of the Fatigue Behavior of {{3D}} Printed Polymers}, - author = {Safai, Lauren and Cuellar, Juan Sebastian and Smit, Gerwin and Zadpoor, Amir A.}, - year = {2019}, - month = aug, - journal = {Additive Manufacturing}, - volume = {28}, - pages = {87--97}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.03.023} -} - -@inproceedings{Safari2001, - title = {Processing and Properties of Piezoelectric Actuators Developed by Fused Deposition Technique}, - booktitle = {{{ISAF}} 2000. {{Proceedings}} of the 2000 12th {{IEEE International Symposium}} on {{Applications}} of {{Ferroelectrics}} ({{IEEE Cat}}. {{No}}.{{00CH37076}})}, - author = {Safari, A. and Danforth, S.C. and Jafari, M. and Allahverdi, M. and Jadidian, B. and Mohammadi, F.}, - year = {2001}, - volume = {1}, - pages = {79--82}, - publisher = {{IEEE}}, - doi = {10.1109/ISAF.2000.941516}, - urldate = {2015-03-17}, - isbn = {0-7803-5940-2} -} - -@article{SafetyConcernsRecycling2021, - title = {Safety Concerns of Recycling Postconsumer Polyolefins for Food Contact Uses: {{Regarding}} (Semi-)Volatile Migrants Untargetedly Screened}, - year = {2021}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {167}, - pages = {105365}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2020.105365}, - urldate = {2021-01-13} -} - -@article{saidaniMultitoolMethodologyEvaluate2021, - title = {Multi-Tool Methodology to Evaluate Action Levers to Close the Loop on Critical Materials \textendash{} {{Application}} to Precious Metals Used in Catalytic Converters}, - author = {Saidani, Michael and Yannou, Bernard and Leroy, Yann and Cluzel, Francois and Kim, Harrison}, - year = {2021}, - month = apr, - journal = {Sustainable Production and Consumption}, - volume = {26}, - pages = {999--1010}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2021.01.010}, - urldate = {2022-10-05}, - abstract = {Implementing circular economy (CE) practices can lead to both environmental savings and competitive advantages for companies. While transitioning from a linear production system to a closed-loop system is not straightforward, adequate methodology and tools can support industrialists in this sustainable shift. This paper proposes a multi-tool approach to systematically identify, classify, and assess the contribution of influence parameters and action levers to close the loop on products and key materials. Industrial ecology and model-based engineering tools are combined to ensure a systemic analysis and evaluation. The developed multi-tool approach combines, in a stepwise methodology, material flow analysis, fuzzy cognitive mapping, structural analysis, and system dynamics, to model and qualify the impact of potential and promising CE strategies. To illustrate each step of this multi-tool methodology, a case study is carried out on a real-world industrial product: a catalytic converter, which contains a non-negligible amount of platinum, considered as a critical raw material by the European Commission. New insights to close the loop on platinum from catalytic converters are thus provided and discussed. Notably, the connections between key action levers to close the loop on platinum are identified and highlighted, including regulations to limit the number of exports, mandatory recycling and reuse rate, end-users behaviors, based on regulatory constraints and financial motivations, and platinum price fluctuation. These findings could help to generate and fine-tune an ad hoc system dynamics model to evaluate the impact of key action levers through more specific scenarios. For instance, the broader implication of this multi-tool methodology could support an original equipment manufacturer in the evaluation of potential CE strategies, through the simulation of selected action levers on the circularity and sustainability performance of their value chain. Ultimately, it could provide quantitative insights to relevant prospective questions, such as, what if a take-back scheme is proposed to augment the collection rate by a given percentage, or what if the design is modified for easy disassembly.}, - langid = {english}, - keywords = {case study,Circular economy,circularity,fuzzy cognitive mapping,material flow analysis,platinum,structural analysis,system dynamics}, - file = {/Users/fabio/Zotero/storage/NRYSWAXQ/S2352550921000105.html} -} - -@article{saidaniTaxonomyCircularEconomy2019, - title = {A Taxonomy of Circular Economy Indicators}, - author = {Saidani, Michael and Yannou, Bernard and Leroy, Yann and Cluzel, Fran{\c c}ois and Kendall, Alissa}, - year = {2019}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {207}, - pages = {542--559}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2018.10.014}, - urldate = {2022-10-05}, - abstract = {Implementing circular economy (CE) principles is increasingly recommended as a convenient solution to meet the goals of sustainable development. New tools are required to support practitioners, decision-makers and policy-makers towards more CE practices, as well as to monitor the effects of CE adoption. Worldwide, academics, industrialists and politicians all agree on the need to use CE-related measuring instruments to manage this transition at different systemic levels. In this context, a wide range of circularity indicators (C-indicators) has been developed in recent years. Yet, as there is not one single definition of the CE concept, it is of the utmost importance to know what the available indicators measure in order to use them properly. Indeed, through a systematic literature review \textendash{} considering both academic and grey literature \textendash{} 55 sets of C-indicators, developed by scholars, consulting companies and governmental agencies, have been identified, encompassing different purposes, scopes, and potential usages. Inspired by existing taxonomies of eco-design tools and sustainability indicators, and in line with the CE characteristics, a classification of indicators aiming to assess, improve, monitor and communicate on the CE performance is proposed and discussed. In the developed taxonomy including 10 categories, C-indicators are differentiated regarding criteria such as the levels of CE implementation (e.g. micro, meso, macro), the CE loops (maintain, reuse, remanufacture, recycle), the performance (intrinsic, impacts), the perspective of circularity (actual, potential) they are taking into account, or their degree of transversality (generic, sector-specific). In addition, the database inventorying the 55 sets of C-indicators is linked to an Excel-based query tool to facilitate the selection of appropriate indicators according to the specific user's needs and requirements. This study enriches the literature by giving a first need-driven taxonomy of C-indicators, which is experienced on several use cases. It provides a synthesis and clarification to the emerging and must-needed research theme of C-indicators, and sheds some light on remaining key challenges like their effective uptake by industry. Eventually, limitations, improvement areas, as well as implications of the proposed taxonomy are intently addressed to guide future research on C-indicators and CE implementation.}, - langid = {english}, - keywords = {Circular economy,Circularity indicators,Selection tool,Taxonomy}, - file = {/Users/fabio/Zotero/storage/NSQWYNLC/Saidani et al_2019_A taxonomy of circular economy indicators.pdf;/Users/fabio/Zotero/storage/SKRI5GN6/S0959652618330221.html} -} - -@article{Saidi2017, - title = {The Sociology of Space as a Catalyst for Innovation in the Health Sector}, - author = {Saidi, Trust and {de Villiers}, Katusha and Douglas, Tania S.}, - year = {2017}, - journal = {Social Science and Medicine}, - volume = {180}, - pages = {36--44}, - publisher = {{Elsevier Ltd}}, - issn = {18735347}, - doi = {10.1016/j.socscimed.2017.03.015}, - abstract = {This paper reviews the role of space in facilitating innovation. It draws on the sociology of space in exploring the social practices, institutional forces and material complexity of how people and spaces interact. We assess how space influences the development of innovative solutions to challenges in the health sector. Our aim is to advance an understanding of the social production of space for healthcare innovation. We draw empirical examples from the Innovation Hub at Groote Schuur Hospital in Cape Town to illustrate that innovation does not take place in an institutional vacuum, but requires space that facilitates interaction of different players. This paper demonstrates that space matters in promoting innovation, particularly through its influence on social relationships and networks. An attractive and novel space, which is different from the usual workplace, stimulates innovation, mainly through being a base for the creation of an ecosystem for the productive interaction of different players. The interaction is important in inspiring new ideas, facilitating creative thought processes, maintaining the flow of information and bringing innovation to life.}, - isbn = {0277-9536}, - pmid = {28319908}, - keywords = {Collaboration,Healthcare,Innovation hub,Social networks,Space} -} - -@article{saint-cyrDriversPESEffectiveness2023, - title = {Drivers of {{PES}} Effectiveness: {{Some}} Evidence from a Quantitative Meta-Analysis}, - shorttitle = {Drivers of {{PES}} Effectiveness}, - author = {{Saint-Cyr}, Legrand D. F. and V{\'e}drine, Lionel and Legras, Sophie and Le Gallo, Julie and Bellassen, Valentin}, - year = {2023}, - month = aug, - journal = {Ecological Economics}, - volume = {210}, - pages = {107856}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107856}, - urldate = {2023-05-11}, - abstract = {Payments for Environmental or Ecosystem Services (PES) schemes have become a popular tool to address environmental degradation and to promote sustainable management of ecosystem services. We use meta-regression analysis on a sample of 110 individual studies to investigate the determinants of the environmental effectiveness, defined as the probability to increase environmental services (ES) provision, of about 149 PES-schemes implemented worldwide. We find that increased effectiveness of PES schemes is strongly associated with periodical third-party monitoring, generic reference design and to a lesser extent results-based payments. We further study the determinants of PES additionality, defined as direct changes in ES provision induced by the PES scheme, compared to a baseline without PES, on a smaller sample of 41 studies from which we could obtain the necessary data. The results confirm the role of certain design variables, such as monitoring type, and raise a potential trade-off between enrolment and additionality in the assessment of PES effectiveness.}, - langid = {english}, - keywords = {Additionality,Effectiveness,Enrolment,Meta-analysis,Payments for environmental services (PES),Policy design}, - file = {/Users/fabio/Zotero/storage/CSLJ5CJU/Saint-Cyr et al. - 2023 - Drivers of PES effectiveness Some evidence from a.pdf;/Users/fabio/Zotero/storage/UU48F76N/S0921800923001192.html} -} - -@article{sakaoSustainableActionIntention2022, - title = {Sustainable in Action: From Intention to Environmentally Friendly Practices in Makerspaces Based on the Theory of Reasoned Action}, - author = {Sakao, Tomohiko and {Moorefield-Lang}, Heather and Tagler, Michael J and Moritz, Manuel and Peters, Ina and Klemichen, Antje and Stark, Rainer}, - year = {2022}, - journal = {Frontiers in Sustainability | www.frontiersin.org}, - volume = {2}, - pages = {675333}, - doi = {10.3389/frsus.2021.675333}, - urldate = {2022-04-08}, - keywords = {attitude-behavior,ecodesign,education,makerspace,reasoned action approach,self-identity,sustainable product development}, - file = {/Users/fabio/Zotero/storage/VSIZYZ4S/full-text.pdf} -} - -@article{Saladini2018, - title = {Synergies between Industry and Nature \textendash{} {{An}} Emergy Evaluation of a Biodiesel Production System Integrated with Ecological Systems}, - author = {Saladini, Fabrizio and Gopalakrishnan, Varsha and Bastianoni, Simone and Bakshi, Bhavik R}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {30}, - pages = {257--266}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2018.02.004}, - urldate = {2021-08-31}, - abstract = {Techno-ecological synergy (TES) is a framework that encourages integration of technological and ecological systems. Specifically, it incorporates the role of natural capital in engineering assessment and design by quantifying both demand and supply of ecosystem services. Emergy can provide valuable support to improve and interpret TES evaluation, as it is a methodology particularly useful for evaluating systems at the biosphere\textendash technosphere interface. The present study evaluates how the TES framework based on emergy can shed new light by comparing conventional technological alternatives and ecological alternatives for meeting a particular ecosystem service demand. Both the demand and supply of ecosystem services are quantified in consistent units of emergy to obtain aggregated TES metrics. Specifically it was found that additional equipment to treat air pollutants have a higher emergy investment as compared to the forest ecosystem, while the technological unit to treat wastewater requires less emergy as compared to the horizontal subsurface flow wetland, its ecological counterpart. This new approach is tested by application to a biodiesel production plant and by calculating emergy metrics. This work shows that emergy can provide a fundamental improvement to the current TES framework, as it provides an aggregated metric for multiple ecosystem services.}, - keywords = {Ecosystem services,Emergy evaluation,Industrial symbiosis,Sustainability,Techno-ecological synergy}, - file = {/Users/fabio/Zotero/storage/6IDKKR3N/full-text.pdf} -} - -@article{salahuddinPlasticRecyclingReview2023, - ids = {salahuddin2023a}, - title = {Plastic {{Recycling}}: {{A Review}} on {{Life Cycle}}, {{Methods}}, {{Misconceptions}}, and {{Techno-Economic Analysis}}}, - shorttitle = {Plastic {{Recycling}}}, - author = {Salahuddin, Usman and Sun, Jiyu and Zhu, Chunxiang and Wu, Mudi and Zhao, Binchao and Gao, Pu-Xian}, - year = {2023}, - journal = {Advanced Sustainable Systems}, - volume = {7}, - number = {7}, - pages = {2200471}, - issn = {2366-7486}, - doi = {10.1002/adsu.202200471}, - urldate = {2023-08-30}, - abstract = {Plastics are embedded in every inch of the fabric of the society. Although they have played a tremendous role in the progress and development of mankind, they have done equal, if not more, harm to the environment, human health, and marine life. Omnipresence of plastics can be attributed to their low-cost and scalable production that no other material has yet achieved. Once produced, they are used in almost every mundane as well as niche application. But the equation of its use to disposal is not sustainable and humungous quantities of plastic waste are generated each year. In this review article, the very problem of plastic recycling is explored and analyzed. The life cycle of plastics is explained to depict the vastness and peculiar problems associated with it. Various misconceptions are discussed on plastic use and recycling. False presumptions are challenged to show where efforts to solve this huge problem and need to be directed. Lastly, quantitative efficiency and economic analysis of the available recycling methods are shown to compare their feasibility and indicate potential development direction. Such analyses are very important for the societal transition to a sustainable economy that economically recycles most of its plastic at a commercial scale.}, - copyright = {\textcopyright{} 2023 Wiley-VCH GmbH}, - langid = {english}, - keywords = {life cycles,misconception,plastic wastes,recycling,techno-economic analysis}, - file = {/Users/fabio/Zotero/storage/SU6FKTUJ/Salahuddin et al. - 2023 - Plastic Recycling A Review on Life Cycle, Methods.pdf;/Users/fabio/Zotero/storage/FF6GM872/adsu.html} -} - -@article{salazarTheoryActionExplaining2022, - title = {From Theory to Action: {{Explaining}} the Process of Knowledge Attitudes and Practices Regarding the Use and Disposal of Plastic among School Children}, - author = {Salazar, C{\'e}sar and Jaime, Marcela and Leiva, Mauricio and Gonz{\'a}lez, Nuria}, - year = {2022}, - month = apr, - journal = {Journal of Environmental Psychology}, - volume = {80}, - pages = {101777}, - publisher = {{Academic Press}}, - issn = {0272-4944}, - doi = {10.1016/J.JENVP.2022.101777}, - urldate = {2022-03-08}, - abstract = {Environmental education is regarded as a key instrument for promoting pro-environmental behavior in early childhood. In this paper, we analyze the transmission process within a personal value system including knowledge, attitudes, and practices (KAP) regarding the consumption and disposal of plastics among school children, and the extent to which parents play a role in mediating that transmission. The study gathers data from a sample of 1,521 children in southern Chile. Results evidence that the transmission of value systems is a recursive and hierarchical process, where knowledge mediates attitudes, and attitudes (and knowledge) mediate practices. We also find evidence that parents' behavior significantly explains children's behavior in all domains of KAP, with stronger connections among practices where children and parents interact more closely (e.g., packing a lunch box) and in those that are more visible to children (e.g. recycling).}, - keywords = {KAP,Plastic pollution,School children,Transmission} -} - -@article{salehCreativitySustainabilityIntegrative2023, - title = {Creativity for Sustainability: {{An}} Integrative Literature Review}, - shorttitle = {Creativity for Sustainability}, - author = {Saleh, Rabab and Brem, Alexander}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {388}, - pages = {135848}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.135848}, - urldate = {2023-02-09}, - abstract = {How can creativity foster sustainability? This is a recently emerging question that sees current approaches to sustainability solutions as lacking the use of creativity. Creativity is thus seen as an aspiration to re-create and discover new paths to accelerate the transitions towards sustainability. We apply an integrative review of the creativity for sustainability literature with an in-depth analysis of 86 journal articles. In addition, we draw on insights from innovation and business studies and from the social sciences on sustainability transitions. The findings indicate four levels of creativity for sustainability including the individual, community, organizational, and institutional levels. On each of these levels, a set of indicators has been identified.}, - langid = {english}, - keywords = {Creativity,Green,Innovation,Sustainability,Sustainability transition} -} - -@article{salmenperaDifferentPathwaysRecycling2021, - ids = {salmenpera2021a}, - title = {Different Pathways to a Recycling Society \textendash{} Comparison of the Transitions in {{Austria}}, {{Sweden}} and {{Finland}}}, - author = {Salmenper{\"a}, Hanna}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {292}, - pages = {125986}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.125986}, - urldate = {2021-02-04}, - keywords = {Country comparison,Lock-ins,MLP,Municipal wastes,Recycling,Transition}, - file = {/Users/fabio/Zotero/storage/7R2973CN/Salmenperä - 2021 - Different pathways to a recycling society – Compar.pdf;/Users/fabio/Zotero/storage/SEPV5UE6/S0959652621002067.html} -} - -@article{Salvador2020, - title = {Circular Business Models: {{Current}} Aspects That Influence Implementation and Unaddressed Subjects}, - author = {Salvador, Rodrigo and Barros, Murillo Vetroni and da Luz, Leila Mendes and Piekarski, Cassiano Moro and {de Francisco}, Antonio Carlos}, - year = {2020}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {250}, - pages = {119555}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.119555}, - urldate = {2020-03-21}, - abstract = {Natural resources are limited and society has long been unwisely consuming them, while Earth has been longing for care. Most existing businesses are based on linear models and a transition to Circular Business Models is necessary. Circular Business Models are business models that enable systems that are regenerative by nature; they seek maintaining resource value at its maximum for as long as feasible, and eliminating or reducing resource leakage, by closing, slowing, or narrowing resource flows. For a transition to circular business models to happen, researchers and practitioners need to know how to implement and manage them. Therefore, this paper's aim is threefold: (i) identify researchers, topics of highlight and journals housing research on Circular Business Models worldwide, (ii) identify the main aspects that influence Circular Business Model implementation, and (iii) point the unaddressed subjects in the existing literature on Circular Business Models. To that end, a systematic literature review was conducted. The EndNote, Microsoft Power BI, and the VOSviewer software tools were used to manage references and build visual maps, respectively. Resource flow management, considerations on surpluses, system orientation, challenges to circular business models, system design aspects, influence of company size, possible rebound effects, customer consideration, company's culture and behavior, and capacity building for CE have been the main aspects of current concern on circular business model investigation. The importance of increasing circularity through circular business models is mainly addressed through the importance of top management support and its action from the company's core to the outside. Further investigations and partnerships from theoreticians and practitioners are expected to assist the evolution of the theme.}, - keywords = {Business model,CBM,Circular business model,Circular economy,Circularity,Review} -} - -@article{salviaWickedProblemWaste2021, - title = {The Wicked Problem of Waste Management: {{An}} Attention-Based Analysis of Stakeholder Behaviours}, - author = {Salvia, Giuseppe and Zimmermann, Nici and Willan, Catherine and Hale, Joanna and Gitau, Hellen and Muindi, Kanyiva and Gichana, Evans and Davies, Mike}, - year = {2021}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {326}, - pages = {129200}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129200}, - urldate = {2021-11-07}, - abstract = {Surging amounts of waste are reported globally and especially in lower-income countries, with negative consequences for health and the environment. Increasing concern has been raised for the limited progress achieved in practice by diverse sets of policies and programmes. Waste management is a wicked problem characterised by multilayered interdependencies, complex social dynamics and webs of stakeholders. Interactions among these generate unpredictable outcomes that can be missed by decision makers through their understanding and framing of their context. This article aims to identify possible sources of persistent problems by focussing on what captures, shapes and limits the attention of stakeholders and decision-makers, drawing on the attention-based view from organisation theory. The theory describes the process through which issues and opportunities are noticed and how these are translated into actions, by focussing on the influencers at the individual, organisational and context scale. Views on issues and opportunities for waste management were collected in a series of fieldwork activities from 60 participants representing seven main types of stakeholders in the typical lower-middle income Kenyan city of Kisumu. Through a thematic analysis guided by the attention-based view, we identified patterns and misalignment of views, especially between government, community-based organisations and residents, which may contribute to persistent waste problems in Kisumu. Some point to detrimental waste handling practices, from separation to collection and treatment, as the main cause of issues. For others, these practices are due to a poor control of such practices and enforcement of the law. This study's major theoretical contribution is extending the application of attention theory to multi-stakeholder problems and to non-formalized organisations, namely residents and to the new field of waste management. This novel lens contributes a greater understanding of waste issues and their management in Africa that is relevant to policy and future research. By revealing the ``wickedness'' of the waste problem, we point to the need for a holistic and systems-based policy approach to limit further unintended consequences.}, - file = {/Users/fabio/Zotero/storage/XVDJG6ZE/full-text.pdf} -} - -@article{salzmanGlobalStatusTrends2018, - title = {The Global Status and Trends of {{Payments}} for {{Ecosystem Services}}}, - author = {Salzman, James and Bennett, Genevieve and Carroll, Nathaniel and Goldstein, Allie and Jenkins, Michael}, - year = {2018}, - month = mar, - journal = {Nature Sustainability}, - volume = {1}, - number = {3}, - pages = {136--144}, - publisher = {{Nature Publishing Group}}, - issn = {23989629}, - doi = {10.1038/s41893-018-0033-0}, - urldate = {2021-04-23}, - abstract = {Recent decades have witnessed a considerable increase in Payments for Ecosystem Services (PES) - programmes that exchange value for land management practices intended to provide or ensure ecosystem services - with over 550 active programmes around the globe and an estimated US\$36-42 billion in annual transactions. PES represent a recent policy instrument with often very different programmes operating at local, regional and national levels. Despite the growth of these programmes, comprehensive and reliable data have proven difficult to find. This Analysis provides an assessment of the trends and current status of PES mechanisms - user-financed, government-financed and compliance - across the domains of water, biodiversity, and forest and land-use carbon around the world. We report the various dimensions of growth over the past decade (number of programmes, geographical spread, dollar value) to understand better the range of PES mechanisms over time and to examine which factors have contributed to or hindered growth. Four key features stand out for scaling up PES: motivated buyers, motivated sellers, metrics and low-transaction-cost institutions.}, - keywords = {Ecosystem services,Environmental economics,Sustainability} -} - -@article{sambucciTireRecycledRubber2020, - title = {Tire {{Recycled Rubber}} for {{More Eco-Sustainable Advanced Cementitious Aggregate}}}, - author = {Sambucci, Matteo and Marini, Danilo and Valente, Marco}, - year = {2020}, - month = may, - journal = {Recycling}, - volume = {5}, - number = {2}, - pages = {11}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2313-4321}, - doi = {10.3390/recycling5020011}, - urldate = {2020-05-25}, - abstract = {{$<$}p{$>$}This research focused on using ground tire rubber (GTR) with different grain sizes as a replacement for the mineral aggregates used in a cement-based mixture suitable for extrusion-based Additive Manufacturing. The use of two types of GTR particles and the possibility to apply rubberized mixtures in advanced manufacturing technologies are the innovative aspects of this work. At the base of this strategy is the possibility of achieving cementitious aggregates, which would potentially be improved regarding some technological-engineering requirements (lightness, thermal-acoustic insulation, energy dissipation capacity, durability) and environmentally sustainable. The integration of waste tires into cement-based materials is a promising solution for the reuse and recycling of such industrial waste. In addition, this approach may involve a considerable reduction in the use of natural resources (sand, water, coarse mineral aggregates) needed for the building materials production. The purpose of the research was to investigate the effect of sand-GTR replacement on certain chemical-physical properties of mixtures (permeable porosity, surface wetness, and water sorptivity), closely related to material durability. Besides, the role of rubber on the printability properties of the fresh material was evaluated. GTR fillers do not alter the rheological properties of the cement material, which was properly extruded with better print quality than the reference mixture. Concerning chemical-physical characterization, the GTR powder-granules synergy promotes good compaction of the mixture, hinders the cracks propagation in the cement matrix, decreases the permeable porosity, improves the surface hydrophobicity and preserves optimal water permeability.{$<$}/p{$>$}}, - keywords = {additive manufacturing,cement,cement material durability,permeable porosity,rubber mixtures,tire recycling,water sorptivity,wetting properties}, - file = {/Users/fabio/Zotero/storage/CIVWVURY/full-text.pdf} -} - -@article{Samujo2013, - title = {The Impact of Selected Granulometric Properties of Poly(Vinyl Chloride) on the Effectiveness of the Extrusion Process}, - author = {Samuj{\l}o, Bronis{\l}aw and Sikora, Janusz W.}, - year = {2013}, - journal = {Journal of Polymer Engineering}, - volume = {33}, - number = {1}, - pages = {77--85}, - issn = {2191-0340}, - doi = {10.1515/polyeng-2012-0100}, - keywords = {and feed sections,effectiveness of the extrusion,feed opening,granulo-,in which the input,is played by the,material in the form,metric properties,pellet length,process,the most important role}, - file = {/Users/fabio/Zotero/storage/HEI5A9IV/The impact of selected granulometric properties of PVC on the effectiveness of the extrusion process (2012).pdf} -} - -@article{sanchez-carracedoEducationSustainableDevelopment2021, - title = {Education for {{Sustainable Development}} in {{Spanish Engineering Degrees}}. {{Case}} Study}, - author = {{S{\'a}nchez-Carracedo}, Ferm{\'i}n and Sureda, B{\'a}rbara and {Moreno-Pino}, Francisco Manuel and {Romero-Portillo}, Daniel}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {294}, - pages = {126322}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126322}, - urldate = {2021-02-20} -} - -@article{sanchez-carrilloEmbracingHigherEducation2021, - title = {Embracing Higher Education Leadership in Sustainability: {{A}} Systematic Review}, - author = {{Sanchez-Carrillo}, J. C. and Cadarso, M. A. and Tobarra, M. A.}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {298}, - pages = {126675}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126675}, - urldate = {2021-04-29}, - abstract = {Education has long been praised for its economic benefits, which stem from the developed technical skills and improved health conditions it promotes. Nonetheless, improving the quality of education, including sustainability, has become a policy focus since the Tbilisi Declaration and, more recently, in the Sustainable Development Goals. How to increase the contribution of higher education to sustainability is the subject of a robust debate, not only in terms of graduates' competencies but also in its linkages to society at large. The objective of the paper is to identify the main concerns and proposed strategies in recent literature on this topic to elucidate how to overcome the gap between the actions and desires of international institutions and stakeholders. A systematic review of the literature in the last five years supported with the PRISMA workflow and a check of natural processing language was undertaken. Five main topics were identified, including economic effects from higher education, social impacts, pedagogical-related issues, higher education institutions' environmental behaviour, and their structural challenges when implementing sustainability. The analysis indicated that institutions have focused on environmental measures but have paid scant attention to society, their communities, collaboration with other institutions, changes in the training of managers and lecturers and the proper assessment of internal structures that drive the commitment of institutions and education to embrace sustainability. Drawing from the literature, a set of five strategies is recommended to lessen the reported problems and further embrace sustainability in higher education. Hence, innovation in management, planning, openness, training of stakeholders in sustainability, negotiation, and building multipartner networks seem to be the key drivers for adopting sustainability.}, - keywords = {Higher education,Higher education institutions,Innovation,PRISMA,Sustainability,Systematic review} -} - -@article{sanchez-hernandezPotentialUseEarthworms2020, - title = {Potential {{Use}} of {{Earthworms}} to {{Enhance Decaying}} of {{Biodegradable Plastics}}}, - author = {{Sanchez-Hernandez}, Juan C. and Capowiez, Yvan and Ro, Kyoung S.}, - year = {2020}, - month = mar, - journal = {ACS Sustainable Chemistry \& Engineering}, - volume = {8}, - number = {11}, - pages = {4292--4316}, - publisher = {{American Chemical Society}}, - doi = {10.1021/ACSSUSCHEMENG.9B05450}, - urldate = {2021-07-21}, - abstract = {Biosolid application, wastewater irrigation, and plastic mulching technologies are major sources of plastic pollution in agroecosystems. Microplastics may interact with soil physicochemical propert...}, - keywords = {Earthworms,Enhanced bioturbation,Microplastics,Mulch films,Plastic biodegradation,Vermitechnology} -} - -@article{Sanchez-Soto2008, - title = {Blends of {{HDPE}} Wastes: {{Study}} of the Properties}, - author = {{S{\'a}nchez-Soto}, M. and Rossa, A. and S{\'a}nchez, A. J. and {G{\'a}mez-P{\'e}rez}, J.}, - year = {2008}, - journal = {Waste Management}, - volume = {28}, - number = {12}, - pages = {2565--2573}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2007.10.010}, - abstract = {In this work we have analysed the properties of blends of recycled high-density polyethylene (HDPE) filled with talc. We have used two kinds of polymer matrices. The first one came entirely from ground injection moulded parts whereas the second was bimodal, incorporating 80\% of the previous HDPE and 20\% of recycled HDPE coming from bottles. We have also used two kinds of commercial talc characterized by a medium particle size of 2 {$\mu$}m and 10 {$\mu$}m, respectively. The amount of talc added to both matrices weighed of 10\% and 20\%. With regards to the mechanical properties of the analysed composites, greater values of Young's modulus and break stresses were found using a smaller particle size and higher talc content. On the other hand, the combination of the two HDPEs with very different viscosities produced a notable increase in the strain at break and in the absorbed energy; both measured at high and low strain rates. Despite the differences in viscosities between the two HDPEs, we did not observe separation of phases during either the processing or testing. Under impact loading, the higher energy absorption in the composites was observed when the finest talc grade with a 10\% content weight was added to the bimodal matrix. \textcopyright{} 2007 Elsevier Ltd. All rights reserved.}, - isbn = {0956-053X}, - pmid = {18093819}, - file = {/Users/fabio/Zotero/storage/K5SJTXUB/Sánchez-Soto et al. - 2008 - Blends of HDPE wastes Study of the properties.pdf} -} - -@article{Sanchez2014, - title = {Recyclability Assessment of Nano-Reinforced Plastic Packaging}, - author = {S{\'a}nchez, C. and Hortal, M. and Aliaga, C. and Devis, A. and {Cloquell-Ballester}, V. A.}, - year = {2014}, - journal = {Waste Management}, - volume = {34}, - number = {12}, - pages = {2647--2655}, - issn = {18792456}, - doi = {10.1016/j.wasman.2014.08.006}, - abstract = {Packaging is expected to become the leading application for nano-composites by 2020 due to the great advantages on mechanical and active properties achieved with these substances. As novel materials, and although there are some current applications in the market, there is still unknown areas under development. One key issue to be addressed is to know more about the implications of the nano-composite packaging materials once they become waste. The present study evaluates the extrusion process of four nanomaterials (Layered silicate modified nanoclay (Nanoclay1), Calcium Carbonate (CaCO3), Silver (Ag) and Zinc Oxide (ZnO) as part of different virgin polymer matrices of polyethylene (PE), Polypropylene (PP) and Polyethyleneterephtalate (PET). Thus, the following film plastic materials: (PE-Nanoclay1, PE-CaCO3, PP-Ag, PET-ZnO, PET-Ag, PET-Nanoclay1) have been processed considering different recycling scenarios. Results on recyclability show that for PE and PP, in general terms and except for some minor variations in yellowness index, tensile modulus, tensile strength and tear strength (PE with Nanoclay1, PP with Ag), the introduction of nanomaterial in the recycling streams for plastic films does not affect the final recycled plastic material in terms of mechanical properties and material quality compared to conventional recycled plastic. Regarding PET, results show that the increasing addition of nanomaterial into the recycled PET matrix (especially PET-Ag) could influence important properties of the recycled material, due to a slight degradation of the polymer, such as increasing pinholes, degradation fumes and elongation at break. Moreover, it should be noted that colour deviations were visible in most of the samples (PE, PP and PET) in levels higher than 0.3 units (limit perceivable by the human eye). The acceptance of these changes in the properties of recycled PE, PP and PET will depend on the specific applications considered (e.g. packaging applications are more strict in material quality that urban furniture or construction products).}, - pmid = {25263216}, - keywords = {Composite,Film,Nanomaterial,Packaging,Plastic,Recycling}, - file = {/Users/fabio/Zotero/storage/HGWQHSX2/Sánchez et al. - 2014 - Recyclability assessment of nano-reinforced plastic packaging.pdf} -} - -@phdthesis{sanchezMethodologicalPropositionEvaluate2016, - title = {Methodological Proposition to Evaluate Polymer Recycling in Open-Source Additive Manufacturing Contexts}, - author = {Sanchez, Fabio Alberto Cruz}, - year = {2016}, - month = dec, - urldate = {2023-03-03}, - abstract = {Since the beginning of the XXI century, we can recognize that several technical (r)evolutions have changed the way we conceived our world. New realities have appeared thanks to the information and communication technologies (e.g. Internet), peer-to-peer dynamics (e.g. open software/hardware, collaborative economy), new means of production (fablabs, hackerspaces), among others. One of the impacts of this technical ecosystem is the individual's empowerment that changes the relationship between consumer and producer. For instance, we observe an evolution of role passing from a passive consumer towards an active prosumer, where this latter considers not only economic aspects, but also social and environmental issues.This thesis is integrated in this global issue; indeed, throughout the manuscript we analyze about the impact of open-source (OS) Additive Manufacturing (AM) (also as known as open-source 3D printing or just 3D printing) in the light of the sustainability issues. The democratization of OS AM and the creation of spaces for co-creation (e.g. FabLabs) proved the interest for changes in the established roles. Therefore, we are interested in how this OS technology could develop sustainable waste management options through a polymer recycling process. In a first phase, we present the concept of additive manufacturing (AM) and its importance on sustainability issues. A systematic literature review related to the material recycling advances in the commercial and open-source (OS) AM is developed with a focus on thermoplastic polymer recycling.In a second phase, our aim is to validate open-source AM systems as a reliable manufacturing tool. We develop and test an experimental protocol in order to evaluate the dimensional performance using as case study a representative OS 3D printer: called FoldaRap. It was found that the International Standard Tolerance Grade of this machine is situated between IT14 and IT16. We conclude that the dimensional performance of this case study is comparable to the commercial AM systems, taking into account the important different in terms of machine cost. In a third phase, we center our attention on the recycling process and we propose a systematic methodology to evaluate the feasibility of the use of recycled thermoplastic polymer in OS 3D printers. A case study is developed with the evaluation of the recycling process using polylactid acid (PLA). The results allow us to conclude that the use of recycled PLA is technically feasible. Nevertheless, the degradation of the material is more important than in other traditional manufacturing systems (e.g. injection). Finally, we concludes and propose as perspectives, the study of a distributed recycling process for other type of polymers}, - copyright = {Licencia Creative Commons Atribuci\'on-NoComercial-CompartirIgual 4.0 Internacional (CC-BY-NC-SA)}, - langid = {english}, - school = {Universit\'e de Lorraine}, - file = {/Users/fabio/Zotero/storage/SWAVXYWR/Sanchez - 2016 - Methodological proposition to evaluate polymer rec.pdf} -} - -@article{sandbergSufficiencyTransitionsReview2021, - title = {Sufficiency Transitions: {{A}} Review of Consumption Changes for Environmental Sustainability}, - author = {Sandberg, Maria}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {293}, - pages = {126097}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126097}, - urldate = {2021-02-14}, - abstract = {It has been argued that halting environmental degradation requires an approach of sufficiency, which entails substantial changes in consumption patterns for high-consuming classes, including a reduction in consumption levels. This article reviews the literature on sufficiency, asking two main questions: What are the specific consumption changes that the sufficiency literature suggests to reduce ecological footprints, and how can such consumption changes be advanced? The article uses a combination of semi-systematic and integrative review methodologies. The article shows that sufficiency may entail four types of consumption changes: absolute reductions, modal shifts, product longevity, and sharing practices. It provides an overview of sufficiency practices across four consumption categories: housing, nutrition, mobility, and miscellaneous consumption. In addition, the article identifies barriers and actors that can prevent or advance sufficiency transitions. Barriers to sufficiency transitions include consumer attitudes and behavior, culture, the economic system, the political system, and the physical environment. Actors include businesses, policymakers, citizens, NGOs, and educators. The article advances our understanding of sufficiency as a concept and the multidimensionality of sufficiency transitions.}, - file = {/Users/fabio/Zotero/storage/6IGP4JZR/full-text.pdf} -} - -@article{sandersHowWriteHow2020, - ids = {sanders2020a}, - title = {How to Write (and How Not to Write) a Scientific Review Article}, - author = {Sanders, David Avram}, - year = {2020}, - month = jul, - journal = {Clinical Biochemistry}, - volume = {81}, - pages = {65--68}, - issn = {00099120}, - doi = {10.1016/j.clinbiochem.2020.04.006}, - urldate = {2023-01-14}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/DNSXJBN7/Sanders - 2020 - How to write (and how not to write) a scientific r.pdf} -} - -@article{Sandstrom2016, - title = {The Non-Disruptive Emergence of an Ecosystem for {{3D Printing}} - {{Insights}} from the Hearing Aid Industry's Transition 1989-2008}, - author = {Sandstr{\"o}m, Christian G.}, - year = {2016}, - journal = {Technological Forecasting and Social Change}, - volume = {102}, - pages = {160--168}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2015.09.006}, - abstract = {3D Printing technologies have received extensive attention in recent years, but empirical investigations of how this technology is used for manufacturing are still sparse. More knowledge is also needed regarding how 3D Printing affects the competitive dynamics between firms. This article explores how 3D Printing has been adopted for manufacturing and discusses under what conditions it might influence competition in different industries. Drawing upon data from the global hearing aid industry's adoption of 3D Printing during the period 1989-2008, this paper describes some of the benefits of using the technology, while also pointing out challenges firms encounter in making this transition. The study shows that early adopters were exposed to more technological uncertainty related to choosing printers. All firms encountered operational challenges as 3D Printing required new skill sets, but the technology had little impact on the competitive dynamics of this industry. Drawing upon literature on technological discontinuities, platforms and ecosystems, the paper illustrates and explains why the technology was not disruptive and also discusses how these findings apply to other industrieswhere 3D Printing is currently gaining momentum.}, - isbn = {0040-1625}, - keywords = {3D Printing,Additive manufacturing,Digital fabrication,Disruptive innovation,Hearing aid industry,Technological discontinuities}, - file = {/Users/fabio/Zotero/storage/IE65ETFB/The non-disruptive emergence of an ecosystem for 3D Printing - Insights from the hearing aid industry's transition 1989-2008.pdf} -} - -@article{sanerBuildingConsensusMoral2016, - title = {Building the Consensus: {{The}} Moral Space of Earth Measurement}, - author = {Saner, Marc A and Bordt, Michael}, - year = {2016}, - doi = {10.1016/j.ecolecon.2016.06.019}, - urldate = {2021-08-29}, - abstract = {We chart the moral space of Earth measurement with the aim to develop practical tools to evaluate and improve Earth measurement frameworks (including environmental-economic accounting and ecosystem services). Based on a survey of environmental ethics, we develop four concepts that are fundamentally important to fostering agreement in debates over Earth measurement frameworks among stakeholders with diverging belief systems. The four concepts can thus be used as criteria to evaluate the completeness and defensibility of existing measurement frameworks. The first two concepts, the consideration of broad human values and long time frames follow the landmark work by Bryan Norton. We further propose the adoption of the capital approach and precaution as the third and fourth concept, respectively. We conclude with suggestions for how current frameworks could be rendered more complete, defensible and internationally acceptable.}, - keywords = {Convergence,Critical natural capital,Ecosystem accounting frameworks,Environmental services,Strong sustainability,Substitutability,Systems approach,Weak anthropocentrism}, - file = {/Users/fabio/Zotero/storage/DJEDIAAP/full-text.pdf} -} - -@article{sanguinetiTechnologyAdoptionGlobal2023, - title = {Technology Adoption, Global Value Chains and Sustainability: {{The}} Case of Additive Manufacturing}, - shorttitle = {Technology Adoption, Global Value Chains and Sustainability}, - author = {Sanguineti, Francesca and Magnani, Giovanna and Zucchella, Antonella}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {408}, - pages = {137095}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137095}, - urldate = {2023-05-01}, - abstract = {With companies like Adidas paving the way, the adoption of technologies like additive manufacturing (AM) to manage global value chains in a more sustainable way is gaining increasing attention from researchers and practitioners alike. However, despite the potential of AM to revolutionize sustainable GVC management, few studies have explored this connection in depth. To address this research gap, we present a systematic literature review examining the current state of the art on the topic. Through our systematic methodology and comprehensive analysis, we uncover the potential of AM to transform the sustainable management of GVC and identify areas for future research. Our findings not only contribute to academic understanding but also offer a valuable framework for practitioners seeking to advance sustainable GVC management through the use of AM.}, - langid = {english}, - keywords = {3D printing,Additive manufacturing,Global Value Chains,Sustainability,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/G8T8SUH8/Sanguineti et al_2023_Technology adoption, global value chains and sustainability.pdf;/Users/fabio/Zotero/storage/ZNNSA4BP/S0959652623012532.html} -} - -@article{sanmartinPluralisingPlanetaryJustice2022, - title = {Pluralising Planetary Justice beyond the {{North-South}} Divide: {{Recentring}} Procedural, Epistemic, and Recognition-Based Justice in Earth-Systems Governance}, - author = {San Mart{\'i}n, William and Wood, Nathan}, - year = {2022}, - month = feb, - journal = {Environmental Science \& Policy}, - volume = {128}, - pages = {256--263}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.12.002}, - urldate = {2021-12-10} -} - -@article{Santa-Maria2021, - title = {Framing and Assessing the Emergent Field of Business Model Innovation for the Circular Economy: {{A}} Combined Literature Review and Multiple Case Study Approach}, - author = {{Santa-Maria}, Tomas and Vermeulen, Walter J.V. and Baumgartner, Rupert J.}, - year = {2021}, - month = apr, - journal = {Sustainable Production and Consumption}, - volume = {26}, - pages = {872--891}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.12.037}, - urldate = {2021-01-01}, - file = {/Users/fabio/Zotero/storage/AMDKUKQ2/full-text.pdf} -} - -@article{santa-mariaCircularSprintCircular2022, - title = {The {{Circular Sprint}}: {{Circular}} Business Model Innovation through Design Thinking}, - author = {{Santa-Maria}, Tomas and Vermeulen, Walter J.V. and Baumgartner, Rupert J.}, - year = {2022}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {362}, - pages = {132323}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.132323}, - urldate = {2022-05-28}, - abstract = {Little research has been published on emotional responses evoked by completely new, innovative food products. The objectives of the present study were 1) to assess the emotional response to new products (fruit and vegetable smoothies in a drink pouch) in two different scenarios: looking at the smoothie pouch, or tasting the smoothie with the smoothie pouch alongside; 2) to compare the information obtained when the participants use photographs or use words to express emotions. In the Pack-alone scenario, similar emotional spaces and sample configurations were obtained with both images and words. In the Pack-and-tasting scenario, the richness of the emotional response increased when using images. In both scenarios, the participants used a greater number of negative emotions when these were presented as images rather than as words. This could be considered an advantage, as it enables some negative emotional loads to be portrayed. The present results also demonstrate that evaluating the emotional response allows effective discrimination between samples with similar overall liking scores.} -} - -@article{santamariaFailedSuccessfulInnovations2021, - title = {Failed and Successful Innovations: {{The}} Role of Geographic Proximity and International Diversity of Partners in Technological Collaboration}, - author = {Santamar{\'i}a, Luis and Nieto, Mar{\'i}a Jes{\'u}s and Rodr{\'i}guez, Alicia}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120575}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120575}, - urldate = {2021-02-14}, - abstract = {We aim to clarify the role of research partnerships on the success and failure of innovation projects by examining the geographic proximity and diversity of partners. First, we argue that collaboration with geographically near partners will contribute relatively more to innovation success than it does to innovation failure, while collaboration with geographically distant partners will contribute relatively more to innovation failure than it does to innovation success. Second, we postulate that lower levels of international diversity will contribute relatively more to innovation success than it does to innovation failure, while higher levels of international diversity will contribute relatively more to innovation failure than it does to innovation success. Using a large dataset of firms for the period 2008\textendash 2013, we perform a joint analysis of failed and successful innovations. Our empirical findings support our theoretical arguments. Our results highlight the relevance of studying both failed and successful innovations and the importance of knowing their determinants to manage the innovation process successfully. Moreover, our findings should alert managers to the importance of geographic location when choosing collaboration partners. It is noteworthy that beyond a certain threshold, international diversity begins to act as a brake on innovation success and to increase the likelihood of failure.}, - keywords = {Diversity,Failed innovation,International collaboration,Proximity,Successful innovation} -} - -@article{Santander2020, - title = {Closed Loop Supply Chain Network for Local and Distributed Plastic Recycling for {{3D}} Printing: A {{MILP-based}} Optimization Approach}, - author = {Santander, Pavlo and Cruz Sanchez, Fabio A and Boudaoud, Hakim and Camargo, Mauricio}, - year = {2020}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {154}, - pages = {104531}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104531}, - copyright = {All rights reserved}, - keywords = {3D Printing,Circular economy,closed loop supply chain,Distributed recycling,Mixed integer linear programming,Plastic recycling}, - file = {/Users/fabio/Zotero/storage/IMK9EQWQ/Closed loop supply chain network for local and distributed plastic recycling for 3D printing a MILP-based optimization approach.pdf} -} - -@article{Santander2022, - title = {Social, Political, and Technological Dimensions of the Sustainability Evaluation of a Recycling Network. {{A}} Literature Review}, - author = {Santander, Pavlo and Cruz Sanchez, Fabio A. and Boudaoud, Hakim and Camargo, Mauricio}, - year = {2022}, - month = feb, - journal = {Cleaner Engineering and Technology}, - volume = {6}, - pages = {100397}, - publisher = {{Elsevier}}, - issn = {26667908}, - doi = {10.1016/j.clet.2022.100397}, - urldate = {2022-03-08}, - abstract = {The development and implementation of recycling networks seems to be a promising way to cope with and mitigate the environmental problems of waste. As a mandatory condition, recycling networks must guarantee the achievement of sustainability requirements. Since the first proposal of the TBL (Triple Bottom Line) in the early 1990s, some authors have suggested that this model should be extended to include more dimensions. Recent studies have proposed that for a system to be sustainable, it should not only include the economic, environmental, and social dimensions but must also consider technological and political aspects and their subsequent sustainability indicators for their evaluation. In regard to recycling networks, however, social, technological, and political dimensions are still to be formalized to facilitate their use when designing recycling networks or evaluating their impact. In order to understand how these social, political, and technological dimensions should be integrated into the sustainability evaluation process of a potential recycling network, a systematic literature review has been conducted. A total of 160 journal articles were selected and analyzed. Information was identified on the problem addressed, the recycling domain, the methodologies used, and the social, technological, and political aspects under consideration. A set of social, political, and technological indicators to be considered for the main recycling network problems (design and planning, decision-making and performance evaluation, provider selection, price, and coordination) is then proposed. The main contribution of this work lies in the understanding for future research of how to consider social, political, and technological aspects taking into account the most common problems addressed in a recycling network. At the same time, findings and research gaps have been derived from these results. This study provides a basis for future work oriented toward the holistic evaluation of sustainable recycling networks.}, - copyright = {Licencia Creative Commons Atribuci\'on-NoComercial-NoDerivadas 4.0 Internacional (CC-BY-NC-ND)}, - keywords = {Closed loop supply chain,Political dimension,Recycling,Reverse logistics,Reverse supply chain,Social dimension,Sustainability indicators,Technological dimension}, - file = {/Users/fabio/Zotero/storage/P4DWABZQ/full-text.pdf} -} - -@article{santariusDigitalizationSustainabilityCall2023, - title = {Digitalization and {{Sustainability}}: {{A Call}} for a {{Digital Green Deal}}}, - shorttitle = {Digitalization and {{Sustainability}}}, - author = {Santarius, T. and Dencik, L. and Diez, T. and Ferreboeuf, H. and Jankowski, P. and Hankey, S. and Hilbeck, A. and Hilty, L. M. and H{\"o}jer, M. and Kleine, D. and Lange, S. and Pohl, J. and Reisch, L. and Ryghaug, M. and Schwanen, T. and Staab, P.}, - year = {2023}, - month = sep, - journal = {Environmental Science \& Policy}, - volume = {147}, - pages = {11--14}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2023.04.020}, - urldate = {2023-07-06}, - abstract = {The relation between digitalization and environmental sustainability is ambiguous. There is potential of various digital technologies to slow down the transgression of planetary boundaries. Yet resource and energy demand for digital hardware production and use of data-intensive applications is of substantial size. The world over, there is no comprehensive regulation that addresses opportunities and risks of digital technology for sustainability. In this perspective article, we call for a Digital Green Deal that includes strong, cross-sectoral green digitalization policies on all levels of governance. We argue that a Digital Green Deal should first and foremost aim at greater policy coherence: Current digital policy initiatives should include measures that service environmental goals, and environmental policies must address risks and advance opportunities of digital technologies to spur sustainability transformations.}, - langid = {english}, - keywords = {Digitalization,ICT for Sustainability,Internet governance,Sustainability policy making,Technology policy}, - file = {/Users/fabio/Zotero/storage/5RQNNHFN/Santarius et al. - 2023 - Digitalization and Sustainability A Call for a Di.pdf;/Users/fabio/Zotero/storage/H9YCZU9W/S1462901123001211.html} -} - -@article{Santonen2017, - title = {Cities as {{Living Labs}} \textendash{} {{Increasing}} the Impact of Investment in the Circular Economy for Sustainable Cities}, - author = {Santonen, Teemu and Creazzo, Laura and Griffon, Axelle and B{\'o}di, Zsuzsanna and Aversano, Paolo}, - year = {2017}, - volume = {358}, - number = {July}, - pages = {94}, - file = {/Users/fabio/Zotero/storage/874HL2W5/m-api-55880aba-ae87-b8d9-7615-2c32aa4d760c.pdf} -} - -@article{santos-martinUnravelingRelationshipsEcosystems2013, - title = {Unraveling the {{Relationships}} between {{Ecosystems}} and {{Human Wellbeing}} in {{Spain}}}, - author = {{Santos-Mart{\'i}n}, Fernando and {Mart{\'i}n-L{\'o}pez}, Berta and {Garc{\'i}a-Llorente}, Marina and Aguado, Mateo and Benayas, Javier and Montes, Carlos}, - year = {2013}, - month = sep, - journal = {PLoS ONE}, - volume = {8}, - number = {9}, - issn = {19326203}, - doi = {10.1371/journal.pone.0073249}, - urldate = {2021-06-10}, - abstract = {National ecosystem assessments provide evidence on the status and trends of biodiversity, ecosystem conditions, and the delivery of ecosystem services to society. I this study, we analyze the complex relationships established between ecosystems and human systems in Spain through the combination of Driver-Pressure-State-Impact-Response framework and structural equation models. Firstly, to operationalize the framework, we selected 53 national scale indicators that provide accurate, long-term information on each of the components. Secondly, structural equation models were performed to understand the relationships among the components of the framework. Trend indicators have shown an overall progressive biodiversity loss, trade-offs between provisioning and cultural services associated with urban areas vs. regulating and cultural services associated with rural areas, a decoupling effect between material and non-material dimensions of human wellbeing, a rapid growing trend of conservation responses in recent years and a constant growing linear trend of direct or indirect drivers of change. Results also show that all the components analyzed in the model are strongly related. On one hand, the model shows that biodiversity erosion negatively affect the supply of regulating services, while it is positively related with the increase of provisioning service delivery. On the other hand, the most important relationship found in the model is the effect of pressures on biodiversity loss, indicating that response options for conserving nature cannot counteract the effect of the drivers of change. These results suggest that there is an insufficient institutional response to address the underlying causes (indirect drivers of change) of biodiversity loos in Spain. We conclude that more structural changes are required in the Spanish institutional framework to reach 2020 biodiversity conservation international targets. \textcopyright{} 2013 Santos-Mart\'in et al.}, - pmid = {24039894}, - file = {/Users/fabio/Zotero/storage/YE5ZLCU8/full-text.pdf} -} - -@article{Santos2005, - title = {Characterization of Effluents through a Typical Plastic Recycling Process: {{An}} Evaluation of Cleaning Performance and Environmental Pollution}, - author = {Santos, A. S.F. and Teixeira, B. A.N. and Agnelli, J. A.M. and Manrich, S.}, - year = {2005}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {45}, - number = {2}, - pages = {159--171}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2005.01.011}, - urldate = {2020-04-08}, - abstract = {The public and government more and more concern about water resource conservation and solid waste recycling due to the increasing awareness of socioeconomic problems created by the inappropriate use of these natural resources. Recycling activities must, therefore, go hand in hand with an evaluation of the effluents generated and discharged during such operations, in order to avoid a mere exchange of pollutants. In this study, an evaluation of optimum conditions for some cleaning parameters by using characterization results of effluents was accomplished. Although, a complete evaluation of process parameters has not been possible, good correlations between cleaner performance and effluent parameter measurements were achieved. The environmental pollution promoted through cleaning of plastics during the recycling process of polyolefins and polyethylene terephthalate (PET) was investigated. A comparative evaluation with government requirements showed that these effluents should be treated at their source before discharge to the domestic sewage. A typical physical-chemical treatment should be enough to comply with the requirements. \textcopyright{} 2005 Elsevier B.V. All rights reserved.}, - keywords = {PET,Plastic recycling,Pollutant load,Polyolefins,Washing,Wastewater}, - file = {/Users/fabio/Zotero/storage/KQUBGDGS/Characterization of effluents through a typical plastic recycling process- An evaluation of cleaning performance and environmental pollution.pdf} -} - -@inproceedings{Santos2016, - title = {Using Open Hardware in a Harsh Environment: {{A}} Case Study}, - booktitle = {2016 {{IEEE}} Bienn. {{Congr}}. {{Argentina}}}, - author = {Santos, Rodrigo and Ordinez, Leo and Eggly, Gabriel}, - year = {2016}, - month = jun, - pages = {1--5}, - publisher = {{IEEE}}, - doi = {10.1109/ARGENCON.2016.7585293}, - isbn = {978-1-4673-9765-0} -} - -@article{santosDesignCharacterisationAdditive2019, - ids = {Santos2020}, - title = {Design and Characterisation of an Additive Manufacturing Benchmarking Artefact Following a Design-for-Metrology Approach}, - author = {Santos, Vicente M Rivas and Thompson, Adam and {Sims-Waterhouse}, Danny and Maskery, Ian and Woolliams, Peter and Leach, Richard}, - year = {2019}, - doi = {10.1016/j.addma.2019.100964}, - urldate = {2021-03-09}, - abstract = {A R T I C L E I N F O Keywords: Additive manufacturing Design for additive manufacturing Design for metrology Dimensional metrology Powder bed fusion A B S T R A C T We present the design and characterisation of a high-speed sintering additive manufacturing benchmarking artefact following a design-for-metrology approach. In an important improvement over conventional approaches , the specifications and operating principles of the instruments that would be used to measure the manufactured artefact were taken into account during its design process. With the design-for-metrology methodology , we aim to improve and facilitate measurements on parts produced using additive manufacturing. The benchmarking artefact has a number of geometrical features, including sphericity, cylindricity, coaxiality and minimum feature size, all of which are measured using contact, optical and X-ray computed tomography coordinate measuring systems. The results highlight the differences between the measuring methods, and the need to establish a specification standards and guidance for the dimensional assessment of additive manufacturing parts.}, - file = {/Users/fabio/Zotero/storage/QKWVM3LA/full-text.pdf} -} - -@article{santosPublicPolicyOpen2021, - title = {Public Policy for Open Innovation: {{Opening}} up to a New Domain for Research and Practice}, - author = {Santos, Antonio Bob and Bogers, Marcel L.A.M. and Norn, Maria Theresa and Mendon{\c c}a, Sandro}, - year = {2021}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {169}, - pages = {120821}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120821}, - urldate = {2021-04-29} -} - -@article{santosSustainablePackagingDoes2021, - title = {Sustainable Packaging: {{Does}} Eating Organic Really Make a Difference on Product-Packaging Interaction?}, - author = {Santos, Vera and Gomes, Sandra and Nogueira, Mafalda}, - year = {2021}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {304}, - pages = {127066}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127066}, - urldate = {2021-04-29} -} - -@article{Sanye-Mengual2019, - title = {Assessing the Decoupling of Economic Growth from Environmental Impacts in the {{European Union}}: {{A}} Consumption-Based Approach}, - author = {{Sany{\'e}-Mengual}, E. and Secchi, M. and Corrado, S. and Beylot, A. and Sala, S.}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117535}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.07.010}, - urldate = {2020-05-21}, - abstract = {Pursuing a responsible and sustainable development, the United Nations urged to decouple economic growth from environmental impacts. Several European Union (EU) policies have been implemented towards such goal. Although multiple authors have evaluated the decoupling of the economic growth from the resource use or environmental concerns, the environmental assessment mostly focused on pressures rather than impacts, and used single indicators assumed to be a proxy of the overall effects on the environment. Furthermore, no studies were found using a process-based life cycle approach to quantify the environmental impacts of consumption. To solve such research gap, this paper assesses the decoupling in the EU focusing on potential environmental impacts, complementing a production-based approach with two options for accounting for the impacts of consumption. The aim of this paper is to evaluate the decoupling of the economic growth (in terms of Gross Domestic Product) from the environmental impacts due to EU-28 consumption, assessed by means of life cycle assessment (LCA). The decoupling is then assessed in impact terms rather than limited to pressures by using the Environmental Footprint (EF2017) indicators, which allows assessing 16 different impacts. The Consumption Footprint indicator quantified the environmental impacts of EU apparent consumption, including the territorial impacts (Domestic Footprint) and the embodied impacts in both imports and exports (Trade Footprint). The inventory of pressures for the trade component is compiled either with a bottom-up approach (process-based LCA of representative traded goods) or a top-down approach (input-output-based LCA). Methodological aspects influencing the decoupling assessment and the resulting outputs are presented and discussed. According to the results, the environmental impacts of EU-28 consumption showed decoupling during the last decades (2005\textendash 2014), between relative to absolute decoupling depending on the inventory modeling approach taken. Some countries showed higher decoupling levels than others displaying a heterogeneous map of EU-28 decoupling, which was led by acidification, particulate matter, land use and eutrophication impacts. Notwithstanding current limitations, the assessment of decoupling using consumption-based environmental indicators is very promising for supporting policy-making towards addressing the actual impacts driven by the EU production and consumption system.}, - keywords = {Decoupling,Environmental impact assessment,Environmentally-extended input-output,Life cycle assessment,Sustainable development goal 12,Sustainable development target 8.4}, - file = {/Users/fabio/Zotero/storage/6CA4VJDM/full-text.pdf} -} - -@article{sanz-hernandezTransitionBioeconomyPerspectives2019, - title = {Transition to a Bioeconomy: {{Perspectives}} from Social Sciences}, - author = {{Sanz-Hern{\'a}ndez}, Alexia and Esteban, Encarna and Garrido, Piedad}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {224}, - pages = {107--119}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.168}, - urldate = {2020-06-18}, - abstract = {More than 50 countries and international organisations worldwide are currently working on strategies and policies to promote a transition to a bioeconomy. This economic system centres on a sustainable use of bio- and renewable resources to guarantee sustainability. Although many contributions have been made to the field of bioeconomy, most focus on a science perspective (e.g. chemistry, engineering, technology, biomedicine or biology). Despite the significant importance of social and economic issues for a bioeconomy transition, studies from a social science perspective are largely lacking. This paper presents a systematic review of academic contributions to the field of bioeconomy from a social science standpoint. The results reveal the need for an in-depth analysis of the challenges and opportunities that the bioeconomy faces in social and economic terms.}, - keywords = {Bioeconomy,Bioresources,Social sciences,Socioeconomic impacts,Systematic review} -} - -@article{Saphores2014, - title = {How Effective Are Current Household Recycling Policies? {{Results}} from a National Survey of {{U}}.{{S}}. Households}, - author = {Saphores, Jean-Daniel M. and Nixon, Hilary}, - year = {2014}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {92}, - pages = {1--10}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2014.08.010} -} - -@article{sarancicDesigningSustainableProductservice2023, - title = {Designing Sustainable Product-Service Systems: {{A}} Generic Process Model for the Early Stages}, - shorttitle = {Designing Sustainable Product-Service Systems}, - author = {Sarancic, David and Pigosso, Daniela C. A. and Pezzotta, Giuditta and Pirola, Fabiana and McAloone, Tim C.}, - year = {2023}, - month = mar, - journal = {Sustainable Production and Consumption}, - volume = {36}, - pages = {397--414}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.01.020}, - urldate = {2023-02-12}, - abstract = {The design of Product-Service Systems (PSS) in manufacturing companies has been widely researched over the past three decades, with contributions from various backgrounds. However, the multidisciplinary field led to the development of disparate approaches for PSS design, which furthermore deficiently include sustainability considerations. Such discord hinders PSS uptake in industry due to the unclarity of which process to use and crucial matters to consider. This paper aims to propose a generic process model to describe the early stage of the PSS design, which is the most influential phase for the success of the PSS offering throughout its life cycle, concerning the three dimensions of sustainability. The proposed generic process model addresses early-stage PSS design in three phases and considers seven clusters of entities through five activities. To achieve this aim, existing approaches for PSS design were identified through a systematic literature review, yielding a comprehensive overview of existing approaches distilled with respect to their content, the actions they propose and the sustainability principles they discuss. The systematic review was then followed by in-depth content analysis using widely adopted methodologies in design research and manufacturing companies for process decomposition and consequently synthesis, resulting in the proposed systematic generic process model for the early-stage design of sustainable PSS. The proposed process model was further examined concerning its use implications, limitations, and potential implementation steps.}, - langid = {english}, - keywords = {Early-stage design,Manufacturing companies,Process model,Product-service systems,Sustainability,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/2E6EF2E3/Sarancic et al_2023_Designing sustainable product-service systems.pdf} -} - -@article{sareenAccountabilitySustainabilityTransitions2021, - title = {Accountability and Sustainability Transitions}, - author = {Sareen, Siddharth and Wolf, Steven A.}, - year = {2021}, - month = jul, - journal = {Ecological Economics}, - volume = {185}, - pages = {107056}, - publisher = {{Elsevier BV}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107056}, - urldate = {2021-04-29} -} - -@article{saritasEvolutionForesightWhat2022, - title = {The Evolution of {{Foresight}}: {{What}} Evidence Is There in Scientific Publications?}, - author = {Saritas, Ozcan and Burmaoglu, Serhat and Ozdemir, Dilek}, - year = {2022}, - month = mar, - journal = {Futures}, - volume = {137}, - pages = {102916}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2022.102916}, - urldate = {2022-03-07}, - abstract = {This study examines the recent evolution of Foresight as a well-recognized tool for long-term policy and strategy making and discusses the future directions the activity might take. The science mapping approach is used for the analysis. Drawing on big data, science mapping provides an evolutionary overview of scientific domains across time and helps to identify patterns showing the research agenda and directions of development of those domains. In the present study, we demonstrate the use of the science mapping approach with the case of the Foresight field. The results of our analysis confirm earlier academic studies on the evolution of Foresight; hence show the validity of the science mapping approach. Besides demonstrating the evolution of the field with the scientific publications in the last couple of decades, the study seeks scientific evidence for the next generations of Foresight to emerge towards the 2030s.} -} - -@article{sarjaSystematicLiteratureReview2020, - title = {A Systematic Literature Review of the Transition to the Circular Economy in Business Organizations: {{Obstacles}}, Catalysts and Ambivalences}, - author = {Sarja, Milla and Onkila, Tiina and M{\"a}kel{\"a}, Marileena}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125492}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125492}, - urldate = {2020-12-14} -} - -@article{sarkarMinimalonomicsNovelEconomic2022, - title = {Minimalonomics: {{A}} Novel Economic Model to Address Environmental Sustainability and Earth's Carrying Capacity}, - shorttitle = {Minimalonomics}, - author = {Sarkar, Atanu}, - year = {2022}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {371}, - pages = {133663}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133663}, - urldate = {2022-09-18}, - abstract = {Mass production and insatiable consumption are leading to enormous waste worldwide, contaminating the entire biosphere, losing biodiversity, and climate change. Craving for materialistic things and buying sprees for newer products indicate the dominant roles of human behavior in imminent ecological, social, and economic crises. However, existing global environmental governance has failed to address the current consumption patterns, particularly in rich countries. There is no inclusive developmental policy that integrates human behavior intervention to reduce unnecessary consumption, closed-loop material flow systems to keep waste out of the system, and economic strategies addressing ecological disaster from a social equity standpoint. The paper is based on a critical literature review of three concepts, relevance of behavioral economics in pro-environmental decision making, scope and limitations of circular economy as technological solutions, and conflicts of ecological economics with dominant neoclassical economics pitting `degrowth' as an alternative. The paper proposes a theoretical concept of a novel economic model (minimalonomics) that aims to provide an institutional framework for a minimalist lifestyle without compromising wellbeing, prosperity, equity, and justice. The model focuses on minimizing consumption at the individual and societal levels, integrating theories and principles of ecological economics and behavioral economics, and efficient application of circular economy. Minimalonomics emphasizes creating a pro-environmental attitude in all levels of society (producers, consumers, and government) and translating the individual's perspective to collective and coordinated action for protecting the biosphere. Contrary to the standard economic approach, minimalonomics restores the value of localization and appropriates local social and cultural norms regarding consumption, waste reduction, and environmental protection; thus, the model is more inclusive. Minimalonomics is a novel concept; therefore, before application to governance and policies, it needs further research on creating theories, developing indicators, and testing them in the field.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/N62N6MRF/S0959652622032413.html} -} - -@article{sarkarValueCreationUsing2022, - title = {Value Creation Using Minimal Resources \textendash{} {{A}} Meta-Synthesis of Frugal Innovation}, - author = {Sarkar, Soumodip and Mateus, Sara}, - year = {2022}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {179}, - pages = {121612}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2022.121612}, - urldate = {2022-04-11} -} - -@article{Sarkis2020, - title = {A Brave New World: {{Lessons}} from the {{COVID-19}} Pandemic for Transitioning to Sustainable Supply and Production}, - author = {Sarkis, Joseph and Cohen, Maurie J. and Dewick, Paul and Schr{\"o}der, Patrick}, - year = {2020}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {159}, - pages = {104894}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104894}, - urldate = {2020-05-11}, - file = {/Users/fabio/Zotero/storage/3Z8YN9Q6/full-text.pdf} -} - -@article{sarkisChangingGuardParadigm2021, - title = {Changing of the Guard: {{A}} Paradigm Shift for More Sustainable Supply Chains}, - author = {Sarkis, Joseph and Dewick, Paul and Hofstetter, Joerg S. and Schr{\"o}der, Patrick}, - year = {2021}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {170}, - pages = {105587}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105587}, - urldate = {2021-04-29} -} - -@article{Sarpong2020, - title = {Do-It-Yourself ({{DiY}}) Science: {{The}} Proliferation, Relevance and Concerns}, - author = {Sarpong, David and Ofosu, George and Botchie, David and Clear, Fintan}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120127}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120127}, - urldate = {2020-06-07}, - abstract = {Do-it-yourself (DiY) science and `citizen laboratories' are flourishing as they continue to attract unprecedented numbers of volunteers, communities, groups and venture capitalists. However, the evidence behind why DiY science is proliferating remains scattered and the dominant narratives around DiY practices consist of multiple understandings, beliefs and expectations. In this paper we attempt to map the ever-expanding landscape of the DiY science movement by surveying studies of DiY science practices, in order to highlight the forces driving the phenomenon. We highlight the relevance of DiY science activities to its practitioners and the general public, its positive promise for the birthing of innovative products, as well as the potential risk associated with the phenomenon. We conclude by delineating potential ways of strengthening the operational capacity of DiY community laboratories so as to harness maximum benefits from their operations.}, - keywords = {Citizen science,Community science hubs,DiY science,Maker movement,Open-science movement}, - file = {/Users/fabio/Zotero/storage/EWVG7TNL/Do-it-yourself (DiY) science- The proliferation, relevance and concerns.pdf} -} - -@book{Sarraj2020, - title = {Design and {{Modeling}} of {{Mechanical Systems}} - {{IV}}}, - author = {Sarraj, Riheme and Hassine, Tarek and Gamaoun, Fehmi}, - editor = {Aifaoui, Nizar and Affi, Zouhaier and Abbes, Mohamed Slim and Walha, Lassad and Haddar, Mohamed and Romdhane, Lotfi and Benamara, Abdelmajid and Chouchane, Mnaouar and Chaari, Fakher}, - year = {2020}, - journal = {Lecture Notes in Mechanical Engineering}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - issn = {21954364}, - doi = {10.1007/978-3-030-27146-6}, - abstract = {The aim of the present study is to predict the NiTi behavior under cyclic loading with hydrogen charging. To achieve this goal, a series of experimental tests have been carried out. First, samples have been cycled until having an imposed deformation of 2.1, 4.8, 7.6 and 8.2\% till 50 cycles. Second, orthodontic specimens are submitted to cyclic loading with various strain rates of 5 \texttimes{} 10-3 s-1, 10-3 s-1, 5 \texttimes{} 10-4 s-1 and 10-4 s-1 under an imposed strain of 7.6\%. Finally, arch wires are charged by hydrogen in 0.9\% NaCl an aqueous solution at room temperature with a current density of 10 A/m2 for 2, 3, 4 and 6 h and are aged for 7 days in air. Throughout cyclic loading, a significant degradation of material performance is observed (the critical stress for the start and the end of the martensite transformation, the residual strain and the dissipated energy evolving). This evolution becomes more significant with a higher strain rate and with hydrogen charging rather then without it. Thus, via this work, we can assume that the embrittlement is due to the diffusion of hydrogen and the generation of dislocations after aging.}, - isbn = {978-3-030-27145-9}, - keywords = {Cyclic effect,Embrittlement,Hydrogen,Shape memory alloys}, - file = {/Users/fabio/Zotero/storage/I3JW8C7R/Design and modelling mechanical systems.pdf} -} - -@article{sarraMethodologicalProposalDetermine2020, - title = {A Methodological Proposal to Determine the Optimal Levels of Inter-Municipal Cooperation in the Organization of Solid Waste Management Systems}, - author = {Sarra, Alessandro and Mazzocchitti, Marialisa and Nissi, Eugenia}, - year = {2020}, - month = sep, - journal = {Waste Management}, - volume = {115}, - pages = {56--64}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.07.024}, - urldate = {2020-08-09}, - abstract = {The paper proposes a procedure based on data envelopment analysis (DEA) in order to identify the optimal dimension for inter-municipal cooperation in waste management. Given: (a) a set of decision making units (DMUs) and a production process that virtually transforms municipal expenditure in different amounts of sorted and unsorted waste, (b) a set of exogenous variables conditioning the operational environment of the DMUs and (c) a variable used for measuring the dimension of inter-municipal cooperation, the procedure realizes an iterative correction of input values and efficiency scores to purge, first, the effects of the exogenous variables, and then those of the dimensional variable. In this way, an indicator of the impact of the dimensional variable on the efficiency is obtained for each of the observed DMUs. An application on waste collection services is proposed using data relative to a set of Italian DMUs with a population ranging between 20,000 and 300,000. The results show that DMUs not exceeding the total population of around 55,000 (upper bound of the eighth population decile) provide the best solution for inter-municipal cooperation. Over that level, increases of the population consistently worsen average efficiency (the mean of the impact of the dimensional variable on efficiency scores more than doubles from the eighth to the ninth decile and more than quintuples from the eighth to the last decile). The procedure can be applied to different regional and national contexts and even to inter-municipal cooperation concerning other public services.}, - keywords = {Data envelopment analysis (DEA),Inter-municipal cooperation,Methodological proposal,Waste collection services} -} - -@article{Sartal2018, - title = {Facing the Challenges of the Food Industry: {{Might}} Additive Manufacturing Be the Answer?}, - author = {Sartal, Antonio and Carou, Diego and {Dorado-Vicente}, Rub{\'e}n and Mandayo, Lorenzo}, - year = {2019}, - month = oct, - journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, - volume = {233}, - number = {8}, - pages = {1902--1906}, - publisher = {{SAGE PublicationsSage UK: London, England}}, - issn = {20412975}, - doi = {10.1177/0954405418805611}, - urldate = {2021-08-31}, - abstract = {Our research explores how additive manufacturing can support the food industry in facing its current global challenges. Although information technologies are usually highlighted as the main driver of the Industry 4.0 concept, which was first introduced during the Hannover Fair event in 2011, we posit that additive manufacturing can be the true generator of a sustainable competitive advantage in this sector. This evidence stems from a case study in a plant of one of the world's largest fishing multinational companies. Our results show how, through robotic claw optimization using three-dimensional printing, we not only reduce the manufacturing costs but also increase the flexibility of the line and reduce time to market. On the one hand, our findings should encourage managers to test this technology at their facilities; on the other hand, policymakers should promote the adoption of additive manufacturing, highlighting the potential of this technology within the Industry 4.0 context.}, - keywords = {3D printing,food industry challenges,Industry 4.0,robotic claw,weight reduction} -} - -@article{sasaoWhyPlasticRecycling2022, - ids = {sasao2022a}, - title = {Why Is Plastic Recycling Expensive? {{Hybrid}} Panel Data Analysis of Recyclable Plastic Containers and Packaging in {{Japan}}}, - shorttitle = {Why Is Plastic Recycling Expensive?}, - author = {Sasao, Toshiaki}, - year = {2022}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {185}, - pages = {106505}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106505}, - urldate = {2022-08-11}, - abstract = {This study used panel datasets of recyclable plastic containers and packaging (PCP) in Japan to examine the determinants of contract prices (bids) for recycling. The study applied two methods: the first measure used a hybrid model with characteristics of both fixed and random effects models for an analysis of storage facilities managed by municipalities; and the second measure used standard fixed and random effects models for an analysis by each recycler (recycling facility). The main results clearly showed four phenomena: 1) contract prices tend to be low in large population municipalities; 2) higher quality of collected PCP do not necessarily decrease the contract prices; 3) mechanical recycling and consecutive contracts with the same recyclers for PCP increase contract prices; 4) longer transport distances between storage and recycling facilities and isolated island locations increase contract prices. High contract prices suggest the high recycling cost and low market value of recycled material. The results of the first measure also demonstrated that between-effects were larger than within-effects for all the determinants except for time-invariant isolated islands. For example, consecutive contracts with the same recyclers increased contract prices by 9.4\% for the between-effects, while by 2.2\% for the within-effects. Mechanical recycling increased contract prices by 14.7\% for the between-effects, while by 7.0\% for the within-effects. As such, policymakers should organize the recycling market so that competitive and high-quality recyclers can make a successful bid for PCP recycling regardless of recycling methods.}, - langid = {english}, - keywords = {Contract price,Hybrid model,Panel data,Plastic containers and packaging,Recycling}, - file = {/Users/fabio/Zotero/storage/TECFCH9H/Sasao - 2022 - Why is plastic recycling expensive Hybrid panel d.pdf;/Users/fabio/Zotero/storage/XPFXFUY8/S0921344922003482.html} -} - -@article{Sasse1998, - title = {Chemical {{Recycling}} of {{Polymer Materials}}}, - author = {Sasse, Frank and Emig, Gerhard}, - year = {1998}, - month = oct, - journal = {Chemical Engineering \& Technology}, - volume = {21}, - number = {10}, - pages = {777--789}, - issn = {0930-7516}, - doi = {10.1002/(SICI)1521-4125(199810)21:10<777::AID-CEAT777>3.0.CO;2-L}, - urldate = {2014-06-25}, - file = {/Users/fabio/Zotero/storage/B4QDJEHC/Chemical Recycling of Polymer Materials.pdf} -} - -@article{Saude2015, - title = {Melt {{Flow Index}} of {{Recycle ABS}} for {{Fused Deposition Modeling}} ({{FDM}}) {{Filament}}}, - author = {Sa'ude, Nasuha and Kamarudin, Khairu and Ibrahim, Mustaffa and Ibrahim, Mohd Halim Irwan}, - year = {2015}, - month = jul, - journal = {Applied Mechanics and Materials}, - volume = {773--774}, - pages = {3--7}, - issn = {1662-7482}, - doi = {10.4028/www.scientific.net/AMM.773-774.3}, - abstract = {This paper presents the melt flow index (MFI) of acrylonitrile butadiene styrene (ABS) and recycle ABS filament wire for Fused Deposition Modeling (FDM) machine. In this study, the effect of MFI on recycle ABS material was investigated experimentally based on the melting temperature, density, screw speed and material properties. The MFI result on ABS recycle in wire filament was investigated using Melt Indexer Machine (MIM). Based on the result obtained, it was found that, ABS recycle was increase the density and MFI results. It can be observed that, the higher temperature was melt the recycle ABS material through the MIM and extruder machine.}, - keywords = {abs,abs recycle,abstract,and recycle abs filament,effect of mfi on,fdm,in this study,investigated experimentally based on,machine,melt flow index,mfi,modeling,of acrylonitrile butadiene styrene,recycle abs material was,the,the melting,this paper presents the,wire for fused deposition}, - file = {/Users/fabio/Zotero/storage/ADITBZHX/Melt Flow Index of Recycle ABS for Fused Deposition Modeling (FDM) Filament.pdf} -} - -@article{Saude2016, - title = {Melt Flow Rate ({{MFR}}) of Abs-Copper Composite Filament by Fused Deposition Modeling ({{FDM}})}, - author = {Sa'ude, N. and Ibrahim, M. and Ibrahim, M. H.I.}, - year = {2016}, - journal = {ARPN Journal of Engineering and Applied Sciences}, - volume = {11}, - number = {10}, - pages = {6562--6567}, - issn = {18196608}, - abstract = {This paper presents the melt flow rate (MFR) of an acrylonitrile butadiene styrene ABS-Copper filament wire for Fused Deposition Modelling (FDM) machine. In this study, the effect MFR of 70 \% copper filled in 30 \% ABS filament material was investigated experimentally based on the melting temperature, feed rate and different size of FDM nozzle diameter. The melt flow index (MFI) and mechanical properties of ABS-Copper filament through the injection molding machine and Melt Flow Indexer Machine was investigated in the experimental for highest value of the mechanical properties and MFI. Based on the result obtained, it was found that, increment of 75\% copper filled in ABS filament material in weight percentage (wt. \%) increase the MFR, velocity and length of PMC wire filament material. It can be conclude that, highest temperature and federate is needed to extrude polymer matrix composite (PMC) filament compared to ABS polymer filament material in FDM machine.}, - keywords = {Abs,Abs-copper filament,Fused deposition modeling,Layered manufacturing}, - file = {/Users/fabio/Zotero/storage/ASFFPGGC/MELT FLOW RATE (MFR) OF ABS-COPPER COMPOSITE FILAMENT BY FUSED DEPOSITION MODELING (FDM).pdf} -} - -@article{Sauer2009, - title = {The Influence of Prototype Fidelity and Aesthetics of Design in Usability Tests: {{Effects}} on User Behaviour, Subjective Evaluation and Emotion}, - author = {Sauer, Juergen and Sonderegger, Andreas}, - year = {2009}, - month = jul, - journal = {Applied Ergonomics}, - volume = {40}, - number = {4}, - pages = {670--677}, - publisher = {{Elsevier Ltd}}, - issn = {00036870}, - doi = {10.1016/j.apergo.2008.06.006}, - urldate = {2021-03-21}, - abstract = {An empirical study examined the impact of prototype fidelity on user behaviour, subjective user evaluation and emotion. The independent factors of prototype fidelity (paper prototype, computer prototype, fully operational appliance) and aesthetics of design (high vs. moderate) were varied in a between-subjects design. The 60 participants of the experiment were asked to complete two typical tasks of mobile phone usage: sending a text message and suppressing a phone number. Both performance data and a number of subjective measures were recorded. The results suggested that task completion time may be overestimated when a computer prototype is being used. Furthermore, users appeared to compensate for deficiencies in aesthetic design by overrating the aesthetic qualities of reduced fidelity prototypes. Finally, user emotions were more positively affected by the operation of the more attractive mobile phone than by the less appealing one. \textcopyright{} 2008 Elsevier Ltd. All rights reserved.}, - pmid = {18691696}, - keywords = {Aesthetics,Mobile phone,Prototype fidelity,Usability test} -} - -@article{Sauer2010, - title = {The Influence of User Expertise and Prototype Fidelity in Usability Tests}, - author = {Sauer, J{\"u}rgen and Seibel, Katrin and R{\"u}ttinger, Bruno}, - year = {2010}, - month = jan, - journal = {Applied Ergonomics}, - volume = {41}, - number = {1}, - pages = {130--140}, - publisher = {{Elsevier Ltd}}, - issn = {00036870}, - doi = {10.1016/j.apergo.2009.06.003}, - urldate = {2021-03-21}, - abstract = {An empirical study examined the impact of user expertise and prototype fidelity on the outcomes of a usability test. User expertise (expert vs. novice) and prototype fidelity (paper prototype, 3D mock-up, and fully operational appliance) were manipulated as independent variables in a 2 \texttimes{} 3 between-subjects design. Employing a floor scrubber as a model product, 48 users carried out several cleaning tasks. Usability problems identified by participants were recorded. Furthermore, performance, system management strategies and perceived usability were measured. The results showed that experts reported more usability problems than novices but these were considered to be less severe than those reported by novices. Reduced fidelity prototypes were generally suitable to predict product usability of the real appliance. The implications for the running of usability tests are specific to the fidelity of the prototype. \textcopyright{} 2009 Elsevier Ltd. All rights reserved.}, - pmid = {19632666}, - keywords = {Prototype fidelity,Usability test,User expertise} -} - -@article{Sauermann2020, - title = {Citizen Science and Sustainability Transitions}, - author = {Sauermann, Henry and Vohland, Katrin and Antoniou, Vyron and Bal{\'a}zs, B{\'a}lint and G{\"o}bel, Claudia and Karatzas, Kostas and Mooney, Peter and Perell{\'o}, Josep and Ponti, Marisa and Samson, Roeland and Winter, Silvia}, - year = {2020}, - month = jun, - journal = {Research Policy}, - volume = {49}, - number = {5}, - pages = {103978}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.103978} -} - -@article{Sauerwein2018, - title = {Local and Recyclable Materials for Additive Manufacturing: {{3D}} Printing with Mussel Shells}, - author = {Sauerwein, M. and Doubrovski, E.L.}, - year = {2018}, - month = jun, - journal = {Materials Today Communications}, - volume = {15}, - number = {June 2017}, - pages = {214--217}, - publisher = {{Elsevier}}, - issn = {23524928}, - doi = {10.1016/j.mtcomm.2018.02.028}, - abstract = {The potential of additive manufacturing (AM) for distributed production is often mentioned as an enabler for sustainable manufacturing within a circular economy. Currently, even if manufacturing with AM is distributed, the used materials can rarely be acquired locally and are usually obtained from a centralized location. Addressing this issue, we are developing an approach that supports the search for local materials that are suitable as material input for AM and are recyclable to serve multiple product lifecycles. The approach is an iterative process consisting of four phases; ``material in AM context'', ``recycling opportunities'', ``material property testing'', and ``application possibilities''. As an initial example, we present a process to adapt mussel shell waste into AM material. Mussel shells are a voluminous waste stream in the Netherlands. The shells, which mainly exist of calcium carbonate, are ground into a powder and combined with sugar water. Using a modified material extrusion process, 3D objects are created. In this paper, we discuss the iterations through our approach and illustrate the initial 3D printed results. With this project, we intend to demonstrate the potential of using local waste streams for AM processes for a circular economy. This is a first step towards the development of a methodology for linking local material streams to novel AM processes and meaningful applications.}, - keywords = {Additive manufacturing,Circular economy,Local materials,Recycling}, - file = {/Users/fabio/Zotero/storage/YGEWYPVN/Local and recyclable materials for additive manufacturing- 3D printing with mussel shells.pdf} -} - -@article{Sauerwein2019, - title = {Exploring the Potential of Additive Manufacturing for Product Design in a Circular Economy}, - author = {Sauerwein, Marita and Doubrovski, Eugeni and Balkenende, Ruud and Bakker, Conny}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {226}, - pages = {1138--1149}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.108}, - urldate = {2020-03-21}, - abstract = {Additive manufacturing, also known as 3D printing, is acknowledged for its potential to support sustainable design. In this paper, we explore whether the opportunities that additive manufacturing offers for sustainable design are also useful when designing for a circular economy, and to what extent additive manufacturing can support design for a circular economy. We performed a literature review on the sustainability aspects of additive manufacturing and held a series of interviews with designers about their 3D printed design projects to obtain in-depth information. The interviews were analysed using annotated portfolios, a novel analysis method created specifically for this research. This resulted in a visual representation of the outcomes. We found that additive manufacturing supports circular design strategies by creating opportunities to extend a product's lifespan, for instance by enabling repair or upgrades, even if these products were not originally designed for ease of repair or upgrading. However, the use of monolithic structurally complex parts that support design for recyclability may hinder high value product recovery, like repair. Besides this, the current offer of 3D printable materials should be extended with materials developed for durable use, as well as high-value reuse. Concluding, when accounting for these drawbacks, additive manufacturing is able to support multiple product life cycles and can provide valuable contributions to a circular economy.}, - keywords = {additive manufacturing,Annotated portfolios,Circular economy,Design for sustainability,Product design,Product life extension} -} - -@article{saulickBusinessSustainabilityPerformance2023, - title = {Business Sustainability Performance: {{A}} Systematic Literature Review on Assessment Approaches, Tools and Techniques}, - shorttitle = {Business Sustainability Performance}, - author = {Saulick, Praveen and Bokhoree, Chandradeo and Bekaroo, Girish}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {408}, - pages = {136837}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136837}, - urldate = {2023-05-01}, - abstract = {For the last decades, Sustainable Development has been encouraged to be integrated into the operations of business organisations. Businesses are being blamed to cause environmental degradation and social problems because of their unsustainable activities. However, to know whether businesses are implementing sustainable strategies in their operations, a Business Sustainability Performance Assessment (BSPA) is required. As a result, many approaches, tools, and techniques have been devised to assess sustainability performance at the business level. Therefore, this study aims at identifying the various sustainability assessment approaches, tools, and techniques at the business level. A systematic literature review was conducted whereby 38 related articles from 2000 to 2021 were obtained and analyzed. Following the review, 5 different approaches were identified namely: application of established guidelines; normative framework; management system; index system; and rating/ranking system. Under each approach, there are different tools. In all, 88 tools were obtained. Furthermore, 9 techniques were identified and classified into 4 functional categories. Techniques such as Fuzzy Logic, Multi-Criteria Decision Analysis, and Principle Component Analysis were predominantly favoured by researchers. However, there was no consensus on which method or tool is best for BSPA. A bibliometric analysis found that 60\% of studies used the environmental, social, and economic dimensions for performance assessment. Results demonstrated that the application of BSPA approaches, tools, and techniques had been receiving attention across various industries and the application was more toward industry-generic context rather than industry-specific. Finally, the paper presents key research issues on BSPA and proposes future studies based on reported data.}, - langid = {english}, - keywords = {Assessment approaches,Index system,Management system,Normative framework,Rating and ranking system,Sustainability dimensions,Sustainability performance assessment,Systematic review,Tools and techniques}, - file = {/Users/fabio/Zotero/storage/JTR9YFR5/Saulick et al_2023_Business sustainability performance.pdf;/Users/fabio/Zotero/storage/EWFPRFZC/S0959652623009952.html} -} - -@book{saundersResearchMethodsBusiness2019, - title = {Research Methods for Business Students}, - author = {Saunders, M. N. K. and Lewis, Philip and Thornhill, Adrian}, - year = {2019}, - edition = {Eighth Edition}, - publisher = {{Pearson}}, - address = {{New York}}, - isbn = {978-1-292-20878-7}, - langid = {english}, - lccn = {HD30.4 .S28 2019}, - keywords = {Business,Research,Research Data processing}, - file = {/Users/fabio/Documents/0-Biblio/Research Skills/Mark N. K. Saunders, Philip Lewis, Adrian Thornhill - Research Methods For Business Students-Pearson Education (2019).pdf} -} - -@article{Saura2019, - title = {Comparing {{Data-Driven Methods}} for {{Extracting Knowledge}} from {{User Generated Content}}}, - author = {Saura, Jose Ramon and {Reyes-Menendez}, Ana and Filipe, Ferr{\~a}o}, - year = {2019}, - month = sep, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {4}, - pages = {74}, - issn = {2199-8531}, - doi = {10.3390/joitmc5040074}, - abstract = {This study aimed to compare two techniques of business knowledge extraction for the identification of insights related to the improvement of digital marketing strategies on a sample of 15,731 tweets. The sample was extracted from user generated content (UGC) from Twitter using two methods based on knowledge extraction techniques for business. In Method 1, an algorithm to detect communities in complex networks was applied; this algorithm, in which we applied data visualization techniques for complex networks analysis, used the modularity of nodes to discover topics. In Method 2, a three-phase process was developed for knowledge extraction that included the application of a latent Dirichlet allocation (LDA) model, a sentiment analysis (SA) that works with machine learning, and a data text mining (DTM) analysis technique. Finally, we compared the results of each of the two techniques to see whether or not the results yielded by these two methods regarding the analysis of companies' digital marketing strategies were mutually complementary.} -} - -@article{Sauve2016, - title = {Environmental Sciences, Sustainable Development and Circular Economy: {{Alternative}} Concepts for Trans-Disciplinary Research}, - author = {Sauv{\'e}, S{\'e}bastien and Bernard, Sophie and Sloan, Pamela}, - year = {2016}, - journal = {Environmental Development}, - volume = {17}, - pages = {48--56}, - publisher = {{Elsevier}}, - issn = {22114645}, - doi = {10.1016/j.envdev.2015.09.002}, - abstract = {The intermeshing of disciplines from the natural sciences, social sciences, engineering and management has become essential to addressing today's environmental challenges. Yet, this can be a daunting task because experts from different disciplines may conceptualize the problems in very different ways and use vocabularies that may not be well understood by one another. This paper explores three alternative environmental concepts used in transdisciplinary research, and outlines some of the epistemological and practical problems that each one poses. It pays particular attention to the increasingly popular concept of "circular economy", and contrasts it with the more commonly-used concepts of "environmental sciences" and "sustainable development". In clarifying the nature, meaning and inter-relationship of these alternative concepts, the paper helps trans-disciplinary researchers to understand the opportunities and challenges associated with each one.}, - isbn = {2211-4645}, - keywords = {Circular economy,Environmental protection,Multi-/pluri-/inter-/trans-disciplinary research,Sustainability science,Sustainable development}, - file = {/Users/fabio/Zotero/storage/P9BPTUIE/Environmental sciences, sustainable development and circular economy- Alternative concepts for trans-disciplinary research.pdf} -} - -@article{savagetTheoreticalFoundationsSociotechnical2019, - title = {The Theoretical Foundations of Sociotechnical Systems Change for Sustainability: {{A}} Systematic Literature Review}, - shorttitle = {The Theoretical Foundations of Sociotechnical Systems Change for Sustainability}, - author = {Savaget, Paulo and Geissdoerfer, Martin and Kharrazi, Ali and Evans, Steve}, - year = {2019}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {206}, - pages = {878--892}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.09.208}, - urldate = {2022-09-21}, - abstract = {This paper provides a critical literature overview of the foundations of the concepts of sustainability and sociotechnical systems change. This review covers the analysis of 182 scientific articles through a combination of bibliometric analysis, snowballing, content analysis and problematization. Our results identify and discuss 14 unique ontological and normative foundations shaping how we understand sociotechnical system change for sustainability. These influence both what system change is perceived as desirable and as attainable; as well as how to navigate between all the coexisting pathways, trade-offs, and complexities of the three dimensions of sustainability. By identifying the theoretical foundations, we illustrate the most up-to-date theoretical developments and concomitantly pinpoint a few opportunities for future contributions that improve, refute or complement them, hence shedding light on various research questions to develop the literature further.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/NMP5XJ3A/Savaget et al. - 2019 - The theoretical foundations of sociotechnical syst.pdf} -} - -@article{Savari2020, - title = {Application of the Extended Theory of Planned Behavior to Predict {{Iranian}} Farmers' Intention for Safe Use of Chemical Fertilizers}, - author = {Savari, Moslem and Gharechaee, Hamidreza}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {263}, - pages = {121512}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121512}, - urldate = {2020-04-16}, - abstract = {In recent years, due to the excessive consumption of chemical fertilizers in Iran, the environment and human health have been in serious danger. Therefore, the main idea of this study is to find determining factors in the safe use of chemical fertilizers. An extended theory of planned behavior (TPB) by adding risk perception (RP) and moral norm (MN) has been utilized as a study's theoretical framework. The research was conducted using questionnaire survey method and by the help of structural equation modeling (SEM). The statistical population of the research was all wheat farmers in Khuzestan province (located in southwest of Iran). Using Krejcie and Morgan table, the sample size was estimated 410 individuals. In this study, the sampling method was multistage stratified clustered. The results of Extended TPB variables among respondents showed that only two variables of attitude and MN are in proper status. The results indicated that the original TPB explains 0.69\% of the variance of farmers' behavioral intention in the safely use of chemical fertilizers. The three main structures of the original TPB included attitude, perceived behavioral control (PBC), and subjective norms (SN), all of which had positive impacts on farmers' intention. Most importantly, the extended TPB by adding RP and MN increases the model's ability to explain farmers' safe behavioral intention by 11.2\%. In this study, the most important variables in initial TPB included attitude and subjective norms, but in the extended TPB, moral norm and risk perception were the most important. Therefore, policymakers by emphasizing these variables can promote safe behaviors in using chemical fertilizers.}, - keywords = {Extended theory of planned behavior,Moral norm,Risk perception,Safely use of chemical fertilizers} -} - -@article{savinGEMShortGrowthvsEnvironment2021, - title = {{{GEM}}: {{A}} Short ``{{Growth-vs-Environment}}'' {{Module}} for Survey Research}, - author = {Savin, Ivan and Drews, Stefan and {van den Bergh}, Jeroen}, - year = {2021}, - month = sep, - journal = {Ecological Economics}, - volume = {187}, - pages = {107092}, - publisher = {{Elsevier BV}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107092}, - urldate = {2021-06-08}, - abstract = {Segmentation of survey respondents is a common tool in environmental communication as it helps to understand opinions of people and to deliver targeted messages. Prior research has segmented people based on their opinions about the relationship between economic growth and environmental sustainability. This involved an evaluation of 16 statements, which means considerable survey time and cost, particularly if administered by a third party, as well as cognitive burden on respondents, increasing the chance of incomplete responses. In this study, we apply a machine learning algorithm to results from past surveys among citizens and scientists to identify a robust, minimal set of questions that accurately segments respondents regarding their opinion on growth versus the environment. In particular, we distinguish three groups, called Green growth, Agrowth and Degrowth. To this end, we identify five perceptions, namely regarding `environmental protection', `public services', `life satisfaction', `stability' and `development space'. Prediction accuracy ranges between 81\% and 89\% across surveys and opinion segments. We apply the proposed set of questions on growth-vs-environment to a new survey from 2020 to illustrate its use as an efficient instrument in future surveys.}, - file = {/Users/fabio/Zotero/storage/FDSEWHIE/full-text.pdf} -} - -@article{saviniCircularEconomyWaste2021, - title = {The Circular Economy of Waste: Recovery, Incineration and Urban Reuse}, - shorttitle = {The Circular Economy of Waste}, - author = {Savini, Federico}, - year = {2021}, - month = oct, - journal = {Journal of Environmental Planning and Management}, - volume = {64}, - number = {12}, - pages = {2114--2132}, - publisher = {{Routledge}}, - issn = {0964-0568}, - doi = {10.1080/09640568.2020.1857226}, - urldate = {2022-08-24}, - abstract = {This article examines how the political economy of waste utility services is changing in response to circular economy programs. It focuses on the financial composition, economic position and geography of three sectors: waste recycling, incineration, and urban waste reuse. Building on an empirical analysis of these sectors in the Netherlands, specifically the Amsterdam city-region, it puts forward three key arguments. First, waste recovery corporations are becoming increasingly global and dependent on steady flows of waste. Second, incineration facilities play a central yet uncertain role in planning for the circular economy. Third, the circular economy is driving an emerging material reuse market in cities. The paper concludes by arguing that ongoing changes in waste markets run the risk of making (circular) economies even more dependent on wasteful consumption and production.}, - keywords = {Amsterdam,circular economy,city-regions,political economy of waste,waste recovery}, - file = {/Users/fabio/Zotero/storage/YL56ANER/Savini_2021_The circular economy of waste.pdf} -} - -@article{Savolainen2020, - title = {How {{Additive Manufacturing Technology Changes Business Models}}? \textendash{} {{Review}} of {{Literature}}}, - author = {Savolainen, Jyrki and Collan, Mikael}, - year = {2020}, - month = mar, - journal = {Additive Manufacturing}, - volume = {32}, - pages = {101070}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101070} -} - -@article{Savonen2018, - title = {Development of a {{Resilient}} 3-{{D Printer}} for {{Humanitarian Crisis Response}}}, - author = {Savonen, Benjamin and Mahan, Tobias and Curtis, Maxwell and Schreier, Jared and Gershenson, John and Pearce, Joshua}, - year = {2018}, - month = mar, - journal = {Technologies}, - volume = {6}, - number = {1}, - pages = {30}, - issn = {2227-7080}, - doi = {10.3390/technologies6010030}, - abstract = {Rapid manufacturing using 3-D printing is a potential solution to some of the most pressing issues for humanitarian logistics. In this paper, findings are reported from a study that involved development of a new type of 3-D printer. In particular, a novel 3-D printer that is designed specifically for reliable rapid manufacturing at the sites of humanitarian crises. First, required capabilities are developed with design elements of a humanitarian 3-D printer, which include, (1) fused filament fabrication, (2) open source self-replicating rapid prototyper design, (3) modular, (4) separate frame, (5) protected electronics, (6) on-board computing, (7) flexible power supply, and (8) climate control mechanisms. The technology is then disclosed with an open source license for the Kijenzi 3-D Printer. A swarm of five Kijenzi 3-D printers are evaluated for rapid part manufacturing for two months at health facilities and other community locations in both rural and urban areas throughout Kisumu County, Kenya. They were successful for their ability to function independently of infrastructure, transportability, ease of use, ability to withstand harsh environments and costs. The results are presented and conclusions are drawn about future work necessary for the Kijenzi 3-D Printer to meet the needs of rapid manufacturing in a humanitarian context.}, - isbn = {1906487146}, - keywords = {3-d printing,3-D printing,additive manufacturing,disaster relief,distributed manufacturing,humanitarian engineering,humanitarian logistics,open hardware,open source hardware,rapid manufacturing,remote manufacturing}, - file = {/Users/fabio/Zotero/storage/DYMNGRMN/Development of a resilient 3D printer for humanitarian crisis response.pdf} -} - -@article{sazdovskiCircularEconomyPackaging2022, - title = {Circular {{Economy}} of {{Packaging}} and {{Relativity}} of {{Time}} in {{Packaging Life Cycle}}}, - author = {Sazdovski, Ilija and Bojovic, Dragana and {Batlle-Bayer}, Laura and Aldaco, Ruben and Margallo, Mar{\'i}a and {Fullana-i-Palmer}, Pere}, - year = {2022}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {184}, - pages = {106393}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106393}, - urldate = {2022-05-29} -} - -@article{Scaffaro2012, - title = {Physical Properties of Virgin-Recycled {{ABS}} Blends: {{Effect}} of Post-Consumer Content and of Reprocessing Cycles}, - author = {Scaffaro, R. and Botta, L. and Di Benedetto, G.}, - year = {2012}, - journal = {European Polymer Journal}, - volume = {48}, - number = {3}, - pages = {637--648}, - publisher = {{Elsevier Ltd}}, - issn = {00143057}, - doi = {10.1016/j.eurpolymj.2011.12.018}, - abstract = {Virgin/post-consumer ABS (pc-ABS) blends were re-processed and re-formed up to three times. The effect of pc-ABS content and of reprocessing cycles on the physical properties of the prepared blends was evaluated by mechanical tests (tensile, flexural and impact tests) and by rheological and thermo-mechanical measurements. The processability of pc-ABS blends was not substantially different by that of virgin ABS up to two recycling steps even if the third one induced a slightly decrease of viscosity, more remarkable on increasing the pc-ABS content. The mechanical and thermo-mechanical properties of the samples worsened on increasing the level of pc-ABS and after each reprocessing operation even if the most relevant decreases were observed after the first recycling. \textcopyright{} 2011 Elsevier Ltd. All rights reserved.}, - isbn = {0014-3057}, - keywords = {ABS,Mechanical properties,Polymer blends,Recycling}, - file = {/Users/fabio/Zotero/storage/HF48HHIL/Scaffaro, Botta, Di Benedetto - 2012 - Physical properties of virgin-recycled ABS blends Effect of post-consumer content and of reproces.pdf} -} - -@inproceedings{Scaravetti2001, - title = {Conception d 'une Proc\'edure de Qualification Des Moyens de {{Prototypage Rapide}}}, - booktitle = {Conception et {{Production Int\'egr\'ees}}}, - author = {Scaravetti, Dominique and Dubois, Patrice and Duchamp, Robert}, - editor = {Lavoisier, Herm{\`e}s -}, - year = {2001}, - pages = {1--17}, - keywords = {free form manufacturing,processing quality,rapid prototyping,rapid tooling}, - file = {/Users/fabio/Zotero/storage/LS2R2IPD/Conception d 'une procédure de qualification des moyens de Prototypage Rapide.pdf} -} - -@article{Scaravetti2007, - title = {Qualification of Rapid Prototyping Tools: Proposition of a Procedure and a Test Part}, - author = {Scaravetti, Dominique and Dubois, Patrice and Duchamp, Robert}, - year = {2007}, - month = oct, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {38}, - number = {7-8}, - pages = {683--690}, - issn = {0268-3768}, - doi = {10.1007/s00170-007-1129-2}, - urldate = {2013-06-17}, - keywords = {layer manufacturing,maintenance,qualification of manufacturing tools,quality assurance,rapid prototyping,test part}, - file = {/Users/fabio/Zotero/storage/TSSMIZEY/Qualification of rapid prototyping tools proposition of a procedure and a test part.pdf} -} - -@article{Scemama2022, - title = {Guidance for Stakeholder Consultation to Support National Ecosystem Services Assessment: {{A}} Case Study from {{French}} Marine Assessment}, - author = {Scemama, Pierre and Mongruel, R{\'e}mi and {ene Kermagoret}, Char{\`i} and Bailly, Denis and Carlier, Antoine and Le Mao, Patrick and Vaschalde, Diane and Kermagoret, Charl{\`e}ne and Bailly, Denis and Carlier, Antoine and Mao, Patrick Le and Vaschalde, et Diane}, - year = {2022}, - month = apr, - journal = {Ecosystem Services}, - volume = {54}, - pages = {101408}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - urldate = {2022-01-27}, - abstract = {A R T I C L E I N F O Keywords: National ecosystem assessment Marine and coastal ecosystem services Participative approach Strategic evaluation A B S T R A C T In line with international frameworks and following the example of other countries, France conducted a national ecosystem services (ES) assessment in 2012. National assessments are intended to be both comprehensive and useful. In practice, these objectives are conflicting and difficult to reach, leading the experts in charge of the assessment to allocate effort according to their own priorities. In the case of the marine part of the French ES assessment, we consulted stakeholders at the national scale to better connect the assessment to the interest of the end-users. We implemented a participatory approach based on a combination of workshops and online questionnaires. We collected stakeholder's perception of (i) ES bundle; (ii) hierarchization of issues; (iii) specific issues of concern; and (iv) research needs for different types of marine ecosystems and groups of species. The results of the consultation assisted the assessment process in selecting key issues that necessitate in-depth analysis, and identifying discrepancies between stakeholders' perceptions and the scientific knowledge that need to be addressed. Stakeholders' perceptions were also mobilized as an additional source of data to inform decision-makers regarding the state of ecosystems and their ES. In the end, this work underlines the importance of stakeholder's consultation to support ES assessment and provides guidance for its implementation in the future. Our results can also inform research needs to support the conservation of marine ecosystems.}, - file = {/Users/fabio/Zotero/storage/4HAI9Q54/Scemama et al. - 2022 - Guidance for stakeholder consultation to support national ecosystem services assessment A case study from French.pdf} -} - -@article{schaafsmaTradeoffDecisionsEcosystem2021, - title = {Trade-off Decisions in Ecosystem Management for Poverty Alleviation}, - author = {Schaafsma, Marije and Eigenbrod, Felix and Gasparatos, Alexandros and {Gross-Camp}, Nicole and Hutton, Craig and Nunan, Fiona and Schreckenberg, Kate and Turner, Kerry}, - year = {2021}, - month = sep, - journal = {Ecological Economics}, - volume = {187}, - pages = {107103}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107103}, - urldate = {2021-06-10}, - file = {/Users/fabio/Zotero/storage/WFG9UEB6/full-text.pdf} -} - -@book{Schaeffer2014, - title = {Spaces for Innovation}, - author = {Schaeffer, Jennie Andersson and Eriksson, Y}, - year = {2014}, - abstract = {too complex - interesting and experimental, but too complex}, - isbn = {978-91-7485-155-7}, - file = {/Users/fabio/Zotero/storage/78Y6VFB3/Spaces for innovation.pdf} -} - -@article{schaefferAdvancesScienceAsking2020, - title = {Advances in the {{Science}} of {{Asking Questions}}}, - author = {Schaeffer, Nora Cate and Dykema, Jennifer}, - year = {2020}, - month = jul, - journal = {Annual Review of Sociology}, - volume = {46}, - number = {1}, - publisher = {{Annual Reviews}}, - issn = {0360-0572}, - doi = {10.1146/annurev-soc-121919-054544}, - urldate = {2020-08-09}, - abstract = {In recent decades, research about survey questions has emphasized decision-based approaches. Current research focuses on identifying and systematizing characteristics of questions that are key in researchers' decisions. We describe important classes of decisions and question characteristics: topic, type of question (e.g., event or behavior, evaluation or judgment), response dimension (e.g., occurrence, frequency, intensity), conceptualization and operationalization of the target object (e.g., how to label the object being asked about and the response dimension), question structure (e.g., use of a filter question, placement in a battery), question form or response format (e.g., yes\textendash no, selection from ordered categories, choice from a list, discrete value), response categories, question wording, and question implementation. We use the framework of question characteristics to summarize key results in active research areas and provide practical recommendations. Progress depends on recognizing how question characteristics co-occur, using a variety of methods and appropriate models, and implementing study designs with strong criteria.Expected final online publication date for the Annual Review of Sociology, Volume 46 is July 30, 2020. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.}, - keywords = {data quality,question characteristics,questionnaire design,survey measurement,survey questions,survey research} -} - -@techreport{Schaffers2009a, - title = {D3.2 {{CO-LLABS Technical}} Report for {{WP3}}}, - author = {Schaffers, Hans}, - year = {2009}, - pages = {68}, - institution = {{European Commission ICT Policy Support Programme}} -} - -@inproceedings{Schaffers2011a, - title = {Integrating {{Living Labs}} with {{Future Internet}} Experimental Platforms for Co-Creating Services within {{Smart Cities}}}, - booktitle = {17th {{International Conference}} on {{Concurrent Enterprising}} ({{ICE}} 2011)}, - author = {Schaffers, Hans and Sallstrom, Annika and Pallot, Marc and {Hernandez-Munoz}, Jose M and Santoro, Roberto and Trousse, Brigitte}, - editor = {Thoben, Klaus-Dieter and Stich, Volker and Imtiaz, Ali}, - year = {2011}, - isbn = {978-3-943024-05-0} -} - -@article{scharpenbergAnalyzingPackagingStrategy2021, - title = {Analyzing the Packaging Strategy of Packaging-Free Supermarkets}, - author = {Scharpenberg, Christina and Schmehl, Meike and Glimbovski, Milena and Geldermann, Jutta}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {292}, - pages = {126048}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126048}, - urldate = {2021-02-14}, - abstract = {Little research has been published on emotional responses evoked by completely new, innovative food products. The objectives of the present study were 1) to assess the emotional response to new products (fruit and vegetable smoothies in a drink pouch) in two different scenarios: looking at the smoothie pouch, or tasting the smoothie with the smoothie pouch alongside; 2) to compare the information obtained when the participants use photographs or use words to express emotions. In the Pack-alone scenario, similar emotional spaces and sample configurations were obtained with both images and words. In the Pack-and-tasting scenario, the richness of the emotional response increased when using images. In both scenarios, the participants used a greater number of negative emotions when these were presented as images rather than as words. This could be considered an advantage, as it enables some negative emotional loads to be portrayed. The present results also demonstrate that evaluating the emotional response allows effective discrimination between samples with similar overall liking scores.} -} - -@article{schaubroeckCircularEconomyPractices2020, - title = {Circular Economy Practices May Not Always Lead to Lower Criticality or More Sustainability; Analysis and Guidance Is Needed per Case}, - author = {Schaubroeck, Thomas}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {104977}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104977}, - urldate = {2020-07-20}, - file = {/Users/fabio/Zotero/storage/E7CB4YTM/full-text.pdf} -} - -@article{schaubroeckSustainabilityAssessmentCircular2020, - title = {Sustainability Assessment of Circular Economy over Time: {{Modelling}} of Finite and Variable Loops \& Impact Distribution among Related Products}, - author = {Schaubroeck, Thomas and Gibon, Thomas and Igos, Elorri and Benetto, Enrico}, - year = {2020}, - doi = {10.1016/j.resconrec.2020.105319}, - urldate = {2020-12-21}, - abstract = {To evaluate the sustainability of any economic system, the impact of related products and processes should be considered, which is exactly the aim of life cycle sustainability assessment (LCSA). A first challenge for the current LCSA methodology of circular economy systems, is the consideration of finite and variable loops (e. g. paper fibres can commonly only be recycled a few times). Second, because impact is time-dependant (e.g. financial flows are valued less in the future), loops should be propagated over time. Therefore, we bring forward a general iterative modelling approach (process-by-process) in which flows are tracked over time. A third challenge remains on how to potentially distribute impacts among related products. We present an overview of various approaches, their implications for finite variable loops, whether databases are existing and in which context they should be applied (e.g. for attributional or consequential thinking). A general six-step framework is provided to guide the practitioner. To illustrate this, we developed a simplistic tool (FLOREC BASIC) and performed two case studies. A fictional case on profit generation for flooring reuse, showcases that when considering discounting (10\%), producer profit drops about a third. For a case on linerboard recycling, the water scarcity impact is 11\% higher for 5 times recycling instead of infinite times. However, when considering the consequential effect on the market, effects are the opposite; linerboard recycling has a higher water scarcity impact, because of its considerable water consumption, compared to incineration with displacement of alternative energy sources that have high water scarcity impact.} -} - -@article{Schelly2015, - title = {Open-Source 3-{{D}} Printing Technologies for Education: {{Bringing}} Additive Manufacturing to the Classroom}, - author = {Schelly, Chelsea and Anzalone, Gerald and Wijnen, Bas and Pearce, Joshua M.}, - year = {2015}, - journal = {Journal of Visual Languages \& Computing}, - volume = {28}, - pages = {226--237}, - publisher = {{Elsevier}}, - issn = {1045926X}, - doi = {10.1016/j.jvlc.2015.01.004}, - keywords = {3-D printing,Open-source hardware,STEM education,Teacher education,Teacher workshop,Transformative education}, - file = {/Users/fabio/Zotero/storage/KXLEL9RF/Schelly et al. - 2015 - Open-source 3-D printing technologies for education Bringing additive manufacturing to the classroom.pdf} -} - -@incollection{Schelly2020, - title = {Bridging the {{Social}} and {{Environmental Dimensions}} of {{Global Sustainability}} in {{STEM Education}} with {{Additive Manufacturing}}}, - booktitle = {Integrating {{3D Printing}} into {{Teaching}} and {{Learning}}}, - author = {Schelly, Chelsea and Pearce, Joshua}, - year = {2019}, - month = dec, - publisher = {{Brill | Sense}}, - doi = {10.1163/9789004415133_008}, - urldate = {2020-03-15} -} - -@article{Schenkel2019, - title = {Vicious Cycles That Hinder Value Creation in Closed Loop Supply Chains: {{Experiences}} from the Field}, - author = {Schenkel, Maren and Krikke, Harold and Cani{\"e}ls, Marjolein C.J. and Lambrechts, Wim}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {223}, - pages = {278--288}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.088}, - urldate = {2020-03-21}, - abstract = {Closed loop supply chains can create value by product acquisition, recovery and reselling returned products and parts. Although advanced supply chain optimization models are available, the literature shows that value creation in closed loop supply chains is limited by too many constraints. Strategic success factors may relax these constraints. This study investigates business practices in the closed loop supply chain of four brand owners in capital goods. We find that strategic success factors may relax constraints but they themselves are also constrained, as multiple stakeholders are involved, each having different interests. In all four cases studies, the interaction between success factors and constraints leads to vicious cycles. Breaking these cycles proves to be difficult and requires integral thinking particularly among internal stakeholders of the brand-owners. Further research is needed to differentiate between different types of cycles, e.g. in a taxonomy, and different stakeholder viewpoints, both quantitative and qualitative.}, - keywords = {Closed loop supply chains,Stakeholders,Sustainability,Value creation} -} - -@article{schenuitStagingScienceDramaturgical2023, - title = {Staging Science: {{Dramaturgical}} Politics of the {{IPCC}}'s {{Special Report}} on 1.5~\textdegree{{C}}}, - shorttitle = {Staging Science}, - author = {Schenuit, Felix}, - year = {2023}, - month = jan, - journal = {Environmental Science \& Policy}, - volume = {139}, - pages = {166--176}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.10.014}, - urldate = {2022-12-12}, - abstract = {The Special Report on Global Warming of 1.5\textdegree C (SR15), the Intergovernmental Panel on Climate Change's (IPCC) first report after the adoption of the Paris Agreement, attracted substantial attention in science, media, and politics. In a climate regime where discursive and symbolic elements are important aspects of climate governance, how the IPCC's products are strategically mobilized and staged provide insights into an important facet of science-policy-politics interfaces. Drawing on a novel analytical framework for dramaturgical governance analysis, this article presents an in-depth case study of the IPCC's SR15. It examines how, where, why, and in front of what audiences it was brought out onto stage. The analysis, based on ethnographic observations at COP24 and COP25, expert interviews, background discussions, and document analysis, shows that the IPCC \textendash{} now more than ever \textendash{} is mobilized for different and sometimes contradictory political purposes. Different performance patterns reveal organizational strategies that the IPCC had already used during its sixth assessment cycle to meet the diversifying and increasingly incompatible expectations it is facing. At the same time, the analysis shows that questions about the IPCC's official mandate and practices of fulfilling and interpreting it, responses to misrepresentation of the report, and the problem of political venue shopping within IPCC processes remain unanswered. The study concludes that the production and performance of global environmental assessments are inextricably linked. In addition to the notion of co-production, future research and efforts to design interfaces between science, policy and politics should therefore put more emphasis on the politics inscribed in practices of co-performance.}, - langid = {english}, - keywords = {Dramaturgical analysis,IPCC,Paris Agreement,Science-policy interfaces,UNFCCC}, - file = {/Users/fabio/Zotero/storage/DBK3WDSM/Schenuit_2023_Staging science.pdf;/Users/fabio/Zotero/storage/YYVFP646/S1462901122003252.html} -} - -@article{schibalskiSpatiotemporallyExplicitPrediction2022, - title = {Spatiotemporally Explicit Prediction of Future Ecosystem Service Provisioning in Response to Climate Change, Sea Level Rise, and Adaptation Strategies}, - author = {Schibalski, Anett and Kleyer, Michael and Maier, Martin and Schr{\"o}der, Boris}, - year = {2022}, - month = apr, - journal = {Ecosystem Services}, - volume = {54}, - pages = {101414}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2022.101414}, - urldate = {2022-03-13} -} - -@article{Schirmeister2019, - title = {{{3D}} Printing of High Density Polyethylene by Fused Filament Fabrication}, - author = {Schirmeister, Carl G. and Hees, Timo and Licht, Erik H. and M{\"u}lhaupt, Rolf}, - year = {2019}, - month = aug, - journal = {Additive Manufacturing}, - volume = {28}, - pages = {152--159}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.05.003}, - file = {/Users/fabio/Zotero/storage/RPGJNKXI/3D printing of high density polyethylene by fused filament fabrication.pdf} -} - -@article{schiumaInnovationLabsOrganisational2023, - title = {Innovation Labs as Organisational Catalysts for Innovation Capacity Development: {{A}} Systematic Literature Review}, - shorttitle = {Innovation Labs as Organisational Catalysts for Innovation Capacity Development}, - author = {Schiuma, Giovanni and Santarsiero, Francesco}, - year = {2023}, - month = may, - journal = {Technovation}, - volume = {123}, - pages = {102690}, - issn = {0166-4972}, - doi = {10.1016/j.technovation.2023.102690}, - urldate = {2023-02-12}, - abstract = {Innovation labs are increasingly adopted as an organizational and management initiative to catalyse innovation and support the development of an organizational innovation capacity. Despite the growing attention to the role of innovation labs, the extant studies appear scattered. There is a lack of a comprehensive understanding of their relevance as innovation spaces for developing and sustaining organisations' innovation processes. For this reason, this study aims to expand and update the existing understanding of innovation labs by demonstrating their evolution from closed innovation spaces within large firms to organisational catalysts that foster open, collaborative and user-driven innovation dynamics. Adopting a Systematic Literature Review (SLR) based on 152 peer-reviewed journal articles, the study provides an integrative picture of the current literature on innovation labs. In particular, the study proposes a reference framework distinguishing Innovation Labs' typologies and critical dimensions, a comprehensive definition of an innovation lab, a framework to assess the maturity level of innovation labs, and a research agenda to advance the understanding of innovation labs further.}, - langid = {english}, - keywords = {Innovation capacity,Innovation catalyst initiative,Innovation lab,Spaces for innovation,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/9IS476QD/Schiuma_Santarsiero_2023_Innovation labs as organisational catalysts for innovation capacity development.pdf;/Users/fabio/Zotero/storage/E2DWUFIH/S0166497223000019.html} -} - -@article{Schmack1999, - title = {Biodegradable Fibers of Poly({{L-lactide}}) Produced by High-Speed Melt Spinning and Spin Drawing}, - author = {Schmack, G and Tandler, B. and Vogel, R and Beyreuther, R and Jacobsen, S and Fritz, H.-G.}, - year = {1999}, - month = sep, - journal = {Journal of Applied Polymer Science}, - volume = {73}, - number = {14}, - pages = {2785--2797}, - issn = {0021-8995}, - doi = {10.1002/(SICI)1097-4628(19990929)73:14<2785::AID-APP1>3.0.CO;2-L}, - urldate = {2014-09-12}, - keywords = {biodegradable polymer,high-speed melt,polylactide,polylactide fibers,spin drawing process,spinning process}, - file = {/Users/fabio/Zotero/storage/TJWEMX68/Schmack et al. - 1999 - Biodegradable fibers of poly(L-lactide) produced by high-speed melt spinning and spin drawing.pdf} -} - -@article{Schmack2004, - title = {High-Speed Melt Spinning of Various Grades of Polylactides}, - author = {Schmack, G and T{\dbend}ndler, B. and Optiz, G and Vogel, R and Komber, H and H{\dbend}u{\dbend}ler, L. and Voigt, D and Weinmann, S and Heinemann, M and Fritz, H.-G.}, - year = {2004}, - month = jan, - journal = {Journal of Applied Polymer Science}, - volume = {91}, - number = {2}, - pages = {800--806}, - issn = {0021-8995}, - doi = {10.1002/app.13170}, - urldate = {2015-02-18}, - keywords = {biodegradable,fibers,property rela-,structure}, - file = {/Users/fabio/Zotero/storage/ZPQSD4CP/Schmack et al. - 2004 - High-speed melt spinning of various grades of polylactides.pdf} -} - -@article{Schmid2014, - title = {Materials Perspective of Polymers for Additive Manufacturing with Selective Laser Sintering}, - author = {Schmid, Manfred and Amado, Antonio and Wegener, Konrad}, - year = {2014}, - month = sep, - journal = {Journal of Materials Research}, - volume = {29}, - number = {17}, - pages = {1824--1832}, - issn = {0884-2914}, - doi = {10.1557/jmr.2014.138} -} - -@inproceedings{Schmid2015, - title = {Polymer Powders for Selective Laser Sintering ({{SLS}})}, - author = {Schmid, Manfred and Amado, Antonio and Wegener, Konrad}, - year = {2015}, - pages = {160009}, - doi = {10.1063/1.4918516} -} - -@article{Schmid2016, - title = {Additive {{Manufacturing}}: {{Polymers}} Applicable for Laser Sintering ({{LS}})}, - author = {Schmid, Manfred and Wegener, Konrad}, - year = {2016}, - journal = {Procedia Engineering}, - volume = {149}, - number = {June}, - pages = {457--464}, - publisher = {{The Author(s)}}, - issn = {18777058}, - doi = {10.1016/j.proeng.2016.06.692}, - abstract = {Additive Manufacturing (AM) is close to become a production technique changing the way of part fabrication in future. Enhanced complexity and personalized features are aimed. The expectations in AM for the future are enormous and betimes it is considered as kind of the next industrial revolution. Laser Sintering (LS) of polymer powders is one component of the AM production techniques. However materials successfully applicable to Laser Sintering (LS) are very limited today. The presentation picks up this topic and gives a short introduction on the material available today. Important factors of polymer powders, their significance for effective LS processing and analytical approaches to access those values are presented in the main part. Concurrently the exceptional position of polyamide 12 powders is this connection is outlined.}, - keywords = {3D printing,Additive Manufacturing,Laser sintering (LS),Polymer powders,Powder properties}, - file = {/Users/fabio/Zotero/storage/QRH6CLR6/Additive Manufacturing Polymers applicable for laser sintering (LS).pdf} -} - -@article{Schmidt2019, - title = {In the Making: {{Open Creative Labs}} as an Emerging Topic in Economic Geography?}, - author = {Schmidt, Suntje}, - year = {2019}, - journal = {Geography Compass}, - number = {June}, - pages = {1--16}, - issn = {1749-8198}, - doi = {10.1111/gec3.12463}, - keywords = {dynamics of,economic spaces,germany,leibniz-institute for,research department,research on society and,space}, - file = {/Users/fabio/Zotero/storage/IIYWTW6U/In the making- Open Creative Labs as an emerging topic in economic geography.pdf} -} - -@article{Schmidt2020, - title = {Material Efficiency to Measure the Environmental Performance of Waste Management Systems: {{A}} Case Study on {{PET}} Bottle Recycling in {{Austria}}, {{Germany}} and {{Serbia}}}, - author = {Schmidt, Sarah and Laner, David and Van Eygen, Emile and Stanisavljevic, Nemanja}, - year = {2020}, - month = jun, - journal = {Waste Management}, - volume = {110}, - pages = {74--86}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.05.011}, - urldate = {2020-05-26} -} - -@article{schmidtExportPlasticDebris2017, - title = {Export of {{Plastic Debris}} by {{Rivers}} into the {{Sea}}}, - author = {Schmidt, Christian and Krauth, Tobias and Wagner, Stephan}, - year = {2017}, - month = nov, - journal = {Environmental Science and Technology}, - volume = {51}, - number = {21}, - pages = {12246--12253}, - publisher = {{American Chemical Society}}, - issn = {15205851}, - doi = {10.1021/acs.est.7b02368}, - urldate = {2021-05-03}, - abstract = {A substantial fraction of marine plastic debris originates from land-based sources and rivers potentially act as a major transport pathway for all sizes of plastic debris. We analyzed a global compilation of data on plastic debris in the water column across a wide range of river sizes. Plastic debris loads, both microplastic (particles {$<$}5 mm) and macroplastic (particles {$>$}5 mm) are positively related to the mismanaged plastic waste (MMPW) generated in the river catchments. This relationship is nonlinear where large rivers with population-rich catchments delivering a disproportionately higher fraction of MMPW into the sea. The 10 top-ranked rivers transport 88-95\% of the global load into the sea. Using MMPW as a predictor we calculate the global plastic debris inputs form rivers into the sea to range between 0.41 and 4 \texttimes{} 106 t/y. Due to the limited amount of data high uncertainties were expected and ultimately confirmed. The empirical analysis to quantify plastic loads in rivers can be extended easily by additional potential predictors other than MMPW, for example, hydrological conditions.}, - pmid = {29019247} -} - -@article{schmidtMultidimensionalEffectsSingleuse2021, - title = {The Multidimensional Effects of Single-Use and Packaging Plastic Strategies on {{German}} Household Waste Management}, - author = {Schmidt, Sarah and Laner, David}, - year = {2021}, - month = jul, - journal = {Waste Management}, - volume = {131}, - pages = {187--200}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.06.003}, - urldate = {2021-06-24} -} - -@article{schmidtProspectTheorybasedExperimental2022, - title = {A {{Prospect Theory-based}} Experimental Vignette Methodology for Exploring Rebound Effects and Rebound-Damping Interventions}, - author = {Schmidt, Karolin and K{\"o}sling, Philipp and Bamberg, Sebastian and Bl{\"o}baum, Anke}, - year = {2022}, - month = mar, - journal = {Ecological Economics}, - volume = {193}, - pages = {107302}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107302}, - urldate = {2021-11-29} -} - -@article{schneiderPeopleManagementWork2020, - title = {People Management in Work Organizations: {{Fifty}} Years of Learnings}, - author = {Schneider, Benjamin}, - year = {2020}, - month = sep, - journal = {Organizational Dynamics}, - pages = {100789}, - publisher = {{Elsevier Ltd}}, - issn = {00902616}, - doi = {10.1016/j.orgdyn.2020.100789}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/DMEC49SM/full-text.pdf} -} - -@article{schoenbergImprovingLoopsThat, - title = {Improving {{Loops}} That {{Matter}}}, - author = {Schoenberg, William and Hayward, John and Eberlein, Robert}, - journal = {System Dynamics Review}, - volume = {n/a}, - number = {n/a}, - issn = {1099-1727}, - doi = {10.1002/sdr.1728}, - urldate = {2023-02-09}, - abstract = {The Loops that Matter (LTM) approach to understanding behavior has proven easy to use and broadly applicable, but it has a shortcoming in its original formulation. This is because the original formulation treats the impact of a flow on a stock relative to the net flow, so that all scores tend to get very large in magnitude as a stock approaches equilibrium, but how big depends strongly on how the flows are specified. By reformulating the link scores from a flow to a stock, this topological dependency is removed. The mathematics behind this approach makes clear the relationship of LTM to the Pathway Participation and Loop Impact analysis methods. The result of this, when applying the analysis to a variety of models, is that the determination of the structure responsible for behavior is clearer, and more clearly tied to work already documented using other techniques. \textcopyright{} 2023 System Dynamics Society.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/CXY4L7RV/Schoenberg et al. - Improving Loops that Matter.pdf} -} - -@article{Schoggl2020, - title = {The Narrative of Sustainability and Circular Economy - {{A}} Longitudinal Review of Two Decades of Research}, - author = {Sch{\"o}ggl, Josef-Peter and Stumpf, Lukas and Baumgartner, Rupert J.}, - year = {2020}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {163}, - pages = {105073}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105073}, - urldate = {2020-08-17}, - abstract = {A R T I C L E I N F O Keywords: Circular economy Sustainable development Thematic mapping Multiple correspondence analysis Topic modeling Historiographic analysis A B S T R A C T Circular economy (CE) has gained momentum in the political, economic and scientific fields. The growing popularity of the concept is accompanied by some definitional ambiguities and conceptual uncertainties. In particular , the relationship and contribution of CE to sustainable development (SD) and thus to a more sustainable society is currently under discussion. The purpose of this paper is to contribute to this discussion by providing new insights into the evolution and state of CE research over the past two decades, in general, and its sustainability connotation, in particular. For doing so, a mixed-methods approach was adopted that combines a longitudinal bibliographic network analysis, multiple correspondence analysis and k-means clustering, correlated topic modeling, historiographic citation analysis and a semantic content analysis. The results indicate that the CE literature body can be divided into management and technically-oriented studies that have either a beginning-of-life or an end-of-life focus. Recycling is the most referred to R-strategy, followed by re-manufacturing, repair and reuse, which, however, occur one order of magnitude less frequently. CE research and SD were found to exhibit a subset relationship, as only a limited number of environmental aspects is directly addressed. Social aspects form a periphery. The qualitative analysis further portraits the conceptual evolution of the CE-SD relationship between 2000 and 2019 by following the citation network of the 30 most influential CE papers. The results contribute to positioning CE research within the general Sustainable Development debate and to identifying potential, sustainability-related shortcomings and blind spots.}, - file = {/Users/fabio/Zotero/storage/AJ67NE9R/Schöggl, Stumpf, Baumgartner - 2020 - The narrative of sustainability and circular economy-A longitudinal review of two decades of rese.pdf} -} - -@article{schogglImplementationDigitalTechnologies2023, - title = {Implementation of Digital Technologies for a Circular Economy and Sustainability Management in the Manufacturing Sector}, - author = {Sch{\"o}ggl, Josef-Peter and Rusch, Magdalena and Stumpf, Lukas and Baumgartner, Rupert J.}, - year = {2023}, - month = jan, - journal = {Sustainable Production and Consumption}, - volume = {35}, - pages = {401--420}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2022.11.012}, - urldate = {2022-12-12}, - abstract = {There is growing consensus in literature and practice that digital technologies (DTs) can offer a wide range of potentials for implementing a circular economy in companies. However, empirical insights on how the potentials of different DTs are already realized across various industries are lacking. This study addresses this research gap through descriptive, hierarchical cluster and non-parametric analyses (Kruskal-Wallis tests and Spearman rank correlations) of the use of DTs for circular economy and sustainability management based on data collected in a structured telephone survey with 132 sustainability managers and CEOs of Austrian manufacturing companies. The paper shows for the first time the degree and stage of implementation of four key enabling DTs for a sustainable circular economy and 31 specific applications of those DTs across eight different industries. Of the four DTs, Internet of Things (IoT) technology is most widely implemented, followed by big data analytics, artificial intelligence (AI), and blockchain technology. However, their use in sustainability management is still very limited and is currently mainly in pilot phases. Of the 31 applications surveyed, IoT technology is most frequently used for collecting data from production processes, AI for predictive maintenance, big data analytics for demand forecasting, and blockchain technology for tracking product origins. Statistically significant differences were found in the degree of digitalization, in general, and for sustainability management between industries and company sizes. A strong positive correlation between the implementation of digital technologies in general and their use in a sustainability management context indicates synergies and spillover effects. The findings may help to tailor context-specific and purpose-driven strategies that selectively leverage the benefits of different DTs and supporting sustainability management effectively. Further research may identify scalable best practices, optimal enabling conditions, and environmental and social outcomes.}, - langid = {english}, - keywords = {Circular economy,Digitalization,Empirical study,Industry 4.0,Survey,Sustainable production}, - file = {/Users/fabio/Zotero/storage/M7Z4GYDC/Schöggl et al_2023_Implementation of digital technologies for a circular economy and.pdf;/Users/fabio/Zotero/storage/T4QZ2F5U/S2352550922003098.html} -} - -@article{Schoonover2021, - title = {Exploring Barriers to Implementing Product-Service Systems for Home Furnishings}, - author = {Schoonover, Heather A. and Mont, Oksana and Lehner, Matthias}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {295}, - pages = {126286}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126286}, - urldate = {2021-02-28}, - abstract = {The home furnishings sector faces substantial sustainability challenges resulting from increasing consumption and premature disposal. Innovative business models that provide access rather than ownership hold promise for addressing these challenges, but past research has found that such models face many barriers to success. As the environmental benefits of these business models can only be realised if the models are successfully implemented, it is important to understand what these barriers are and how to overcome them. Our study seeks to understand these barriers in the case of home furnishings leasing, which has seen increasing engagement by both companies and consumers but has not been well explored in academic literature. Through semi-structured interviews with experts from the four firms known to offer home furnishings leasing in Sweden, we identify a number of barriers, including financial and economic concerns, product design, capabilities, relationships, end-users, and policy. We conclude that while some of these barriers are common to leasing of other consumer goods, home furnishings do present some unique challenges due to their bulky nature, wide range of products, and consumers' unfamiliarity with the concept of home furnishings leasing. At the same time, the interviewed companies' experiences provide lessons regarding strategies to overcome these barriers. For example, emphasising added benefits, streamlining the choice of products available to lease, and partnering with other actors to acquire capabilities are some of the ways the companies have addressed the barriers they have encountered. Better understanding the barriers and identifying opportunities to overcome them can help increase the likelihood of successfully implementing leasing business models and thus help reduce the negative environmental impacts of home furnishings consumption.}, - keywords = {Business models,Furniture rental,Home furnishings,Leasing,Product-service systems}, - file = {/Users/fabio/Zotero/storage/GQMDX7DB/full-text.pdf} -} - -@article{schrammApproachesSupportingSustainable2020, - title = {Approaches for Supporting Sustainable Supplier Selection - {{A}} Literature Review}, - author = {Schramm, Vanessa Batista and Cabral, Luciana Priscila Barros and Schramm, Fernando}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {273}, - pages = {123089}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123089}, - urldate = {2020-08-09}, - abstract = {Supplier selection is a typical multicriteria decision problem and a more complex variation of it is the sustainable supplier selection that should consider economic, environmental, and social aspects, simultaneously. Several approaches have been developed to address this process, some of which are based on MCDM/A methods, applied individually or combined with other MCDM/A methods, and/or other different techniques. In this paper, we provide a literature review on these approaches that have been developed over the last three decades (1990\textendash 2019) with 82 reviewed papers. Our study contributes to identify the most frequently applied MCDM/A methods and how they are applied: individually or combined with other techniques; considering a single or a group decision making perspective; dealing with imprecision and/or uncertainties treatment; providing order quantities assignments. Most of the approaches are based on compensatory methods that provokes the effect of compensation among criteria; however, this type of methods is not indicated for supporting decisions that are concerned with sustainability for which environmental and social aspects cannot be compensated for by economical ones.}, - keywords = {Multicriteria decision making/aid (MCDM/A),Supply chain management,Sustainable supplier selection} -} - -@article{schravenPresentFutureEngagement2021, - title = {Past, Present, Future: {{Engagement}} with Sustainable Urban Development through 35 City Labels in the Scientific Literature 1990\textendash 2019}, - author = {Schraven, Daan and Joss, Simon and {de Jong}, Martin}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {292}, - pages = {125924}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.125924}, - urldate = {2021-02-14}, - abstract = {SDG 11 \textendash{} `making cities and human settlements inclusive, safe, resilient and sustainable' \textendash{} draws attention to the criticality of urban governance in the quest for sustainable development. Reflecting this, diverse city labels, such as `sustainable city' and `smart city', have been mobilized by urban actors and scholars to consider cities' responses to various challenges of urban transformation. Consequently, this study interrogates: (1) the growing use of city labels in the scientific literature over three decades; (2) the conceptual dimensions of individual city labels and their mutual interdependencies; and (3) likely future trajectories. This is accomplished through a comprehensive bibliometric analysis of 35 city labels: we examine their (co-)occurrences during 1990\textendash 2019 based on 11337 articles harvested in Scopus; analyse their conceptual associations drawing on a corpus of 22820 author keywords; and make a future forecast based on logistic growth modelling (the underlying datasets are available through open access). The findings significantly take forward recent bibliometric research by demonstrating: the rapid growth in scientific outputs; the diversification of city labels beyond `smart' and `sustainable'; and the evolution of an intricate conceptual field made up of different constellations of city labels. The findings have implications for urban policy and practice: regarding ongoing concerns about how to achieve synergies, rather than trade-offs, between SDGs, the conceptual field points to possible ways for relating SDG 11 to other dimensions of sustainable development. More broadly, the clarification of individual city labels' conceptual underpinnings should help policymakers and practitioners make considered choices when mobilizing city labels in support of urban transformation efforts.}, - keywords = {Bibliometrics,Cities,City label,Smart city,Sustainable city,Sustainable development} -} - -@article{schroderMakingPolicyWork2023, - title = {Making Policy Work for {{Africa}}'s Circular Plastics Economy}, - author = {Schr{\"o}der, Patrick and Oyinlola, Muyiwa and Barrie, Jack and Fwangkwal, Bonmwa and Abolfathi, Soroush}, - year = {2023}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {190}, - pages = {106868}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.106868}, - urldate = {2023-02-09}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/K4TQACM4/Schröder et al. - 2023 - Making policy work for Africa's circular plastics .pdf;/Users/fabio/Zotero/storage/GDQPN94Q/S0921344923000058.html} -} - -@article{Schrot2020, - title = {Enabling Early Career Sustainability Researchers to Conduct Transdisciplinary Research: {{Insights}} from {{Austria}}}, - author = {Schrot, Oliver Gerald and Krimm, Hanna and Schinko, Thomas}, - year = {2020}, - month = oct, - journal = {Challenges in Sustainability}, - volume = {8}, - number = {1}, - pages = {30--42}, - issn = {22976477}, - doi = {10.12924/cis2020.08010030}, - urldate = {2020-10-28}, - abstract = {Human influences on Earth's natural systems are accelerating, with anthropogenic climate and global change posing existential risks for mankind. To overcome the policy implementation gap in practice both collective and transformative actions for sustainability involving science, policy and society are urgently needed. In the realms of science, this relates to taking inter-and transdisciplinary research approaches to foster exchange and co-designing policy options between researcher, decision-makers and other societal stakeholders; however, such collaboration is often limited by time, funding and complexity constrains. This paper recognises that particularly early career climate change and sustainability researchers are exposed to both the claim for and practical challenges of inter- and transdisciplinarity. For a first qualitative investigation of Austrian early career researchers' preparedness for conducting participatory research with societal stakeholders, this study examines perspectives of twelve early career researchers participating in a young scientists' workshop. Using a pre-post survey and analysing data by content, our findings indicate that workshop participants have to manage stakeholder processes directly after graduation and, due to a lack of methodological training, only use a small fraction of existing social science methods and participatory settings for stakeholder collaboration. To support other early career researchers and future students in Austria in developing strong inter-and transdisciplinary research skills, we highlight the added-value of integrating hands-on workshops with societal stakeholders, regular exchange of lessons learned and transdisciplinary lectures into university education. Offering more practice-oriented transdisciplinary learning activities during undergraduate education, like excursions and mini-projects in which students can develop and train participatory methods together with stakeholders under guidance, is believed to be a fruitful strategy in this context.}, - keywords = {Climate change,Early career,Interdisciplinarity,Research practice,Stakeholders,Sustainability,Transdisciplinarity}, - file = {/Users/fabio/Zotero/storage/4CKKA3DK/full-text.pdf} -} - -@article{schuchSeparateCollectionRates2023, - title = {Separate Collection Rates for Plastic Packaging in {{Austria}} \textendash{} {{A}} Regional Analysis Taking Collection Systems and Urbanization into Account}, - author = {Schuch, Dieter and Lederer, Jakob and Fellner, Johann and Scharff, Christoph}, - year = {2023}, - month = jan, - journal = {Waste Management}, - volume = {155}, - pages = {211--219}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.09.023}, - urldate = {2022-12-12}, - abstract = {According to the EU Circular Economy Package, recycling of plastic packaging waste (PPW) has to be enhanced significantly by 2025 and 2030. Although a set of measures will be required along the whole value chain of plastic packaging, the process of separate collection remains the backbone. Hence, a detailed understanding of the performance of current separate collection systems is crucial. As a case study, the separate collection of PPW was analyzed within a single country, Austria, where a variety of collection procedures are implemented. By using the method of material flow analysis, separate collection rates in terms of quantities and qualities were analyzed for separate collection systems of different settlement patterns, target fractions, and service levels provided. Results show that the highest performance was achieved in systems that cover mainly rural areas and where all plastic packaging wastes are collected through curbside collection, with separate collection rates of 74\textendash 77\%. With additional collection via collection centers, these values increased to 78\%-83\%. In comparison, the results for urban areas showed the lowest separate collection rate of 56\%. In the case that separate collection targeted plastic bottles only, maximum collection rates of around 50 \% were observed, with the tendency towards higher collection rates if co-mingled with metals. To enhance separate collection, a general shift to the target fraction ``all plastic packaging'' instead of ``plastic bottles only'' is crucial. Modelling of optimized collection systems in all Austrian regions would lead to a theoretical total separation collection rate of 74\%.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/GXF8UC8L/Schuch et al_2023_Separate collection rates for plastic packaging in Austria – A regional.pdf;/Users/fabio/Zotero/storage/N9AQC2L5/S0956053X22004688.html} -} - -@article{Schulman2013, - title = {A Lab of Labs}, - author = {Schulman, Sarah}, - year = {2013}, - month = aug, - journal = {Stanford Soc. Innov. Rev.}, - abstract = {A report from Lab2, and why learning to reflect on our assumptions about how change happens has value, whether or not ``lab'' is in your title.} -} - -@article{schultzCircularSupplyChain2021, - title = {Circular Supply Chain Governance: {{A}} Qualitative-Empirical Study of the {{European}} Polyurethane Industry to Facilitate Functional Circular Supply Chain Management}, - author = {Schultz, Felix Carl and Everding, Sebastian and Pies, Ingo}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {317}, - pages = {128445}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128445}, - urldate = {2021-08-24}, - abstract = {For many industries, the transition towards a circular economy (CE) is rather challenging because firms need to collaborate with actors within and beyond immediate industry boundaries. Scholars and practitioners expect synergies for circular supply chain management (CSCM) by understanding the role of governance both from a CE perspective and a sustainable supply chain management (SSCM) perspective. However, a systematic analysis of governance mechanisms in their vertical and particularly horizontal (re-)direction is still absent in the extant literature. In response, this study delivers a qualitative-empirical analysis of governance mechanisms' directions based on evidence from the European polyurethane industry. Major findings indicate that whereas governance mechanisms for vertical collaboration\textemdash mostly discussed in SSCM\textemdash are of limited value to facilitate functional CSCM, governance mechanisms for horizontal collaboration can promote the closing of resource loops. In addition, we find three strategic prerequisites for organizations that facilitate horizontal relationships: (1) the development of a CE-enabling environment, (2) the innovation of a circular business model, and (3) the formation of strategic alliances with specialized partners within and outside the industry. If the proposed governance mechanisms for horizontal collaboration can be system(at)ically integrated into supply chain management practices, managers may be better equipped to organize collaboration for functional circular supply chains.}, - file = {/Users/fabio/Zotero/storage/W9X8LEGC/full-text.pdf} -} - -@article{schultzFacilitatingSystemicEcoinnovation2022, - title = {Facilitating Systemic Eco-Innovation to Pave the Way for a Circular Economy: {{A}} Qualitative-Empirical Study on Barriers and Drivers in the {{European}} Polyurethane Industry}, - shorttitle = {Facilitating Systemic Eco-Innovation to Pave the Way for a Circular Economy}, - author = {Schultz, Felix Carl and Reinhardt, Robert Jaroslav}, - year = {2022}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13299}, - urldate = {2022-08-10}, - abstract = {Scholars, politicians, and practitioners have recently advocated that eco-innovation (EI) is critical to achieve the circular economy (CE) vision. While much of the available body of knowledge on EI has predominantly focused on ``eco-efficient'' incremental technological innovation, a successful CE transition requires systemic ``eco-effective'' CE innovation. Yet, little is known about what barriers and drivers are stimulating systemic CE innovation in different sectors and regions. This research aims to deliver an identification of major CE barriers and drivers that impede or facilitate systemic ``eco-effective'' CE innovation in the European polyurethane plastics industry. A hybrid research approach is applied using an original combination of the inductive GABEK method (``GAnzheitliche BEw\"altigung von Komplexit\"at''\textemdash holistic processing of complexity) with deductive consideration of existing theories. Novel findings indicate that barriers to CE innovation largely materialize on individual firm and intra-industrial levels, while drivers to CE innovation primarily manifest beyond immediate industrial boundaries (inter-/cross-industrial). The key contribution lies on revealing the necessity to reframe the focus from mere individual ``optimization'', which has been primarily discussed in the contemporary EI literature, to a collective (horizontal) ``coordination'' challenge across industries to enable a functional CE innovation. In addition, five strategic deliberations are proposed to facilitate and further advance the management of systemic CE innovation activities.}, - copyright = {\textcopyright{} 2022 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of the International Society for Industrial Ecology.}, - langid = {english}, - keywords = {barriers and drivers,circular economy,eco-effectiveness,eco-innovation,industrial ecology,plastics}, - file = {/Users/fabio/Zotero/storage/98K9I88G/Schultz_Reinhardt_Facilitating systemic eco-innovation to pave the way for a circular economy.pdf;/Users/fabio/Zotero/storage/5G6CIBC4/jiec.html} -} - -@article{Schulz2019, - title = {Practising Circles: {{Studying}} Institutional Change and Circular Economy Practices}, - author = {Schulz, Christian and Hjaltad{\'o}ttir, Rannveig Edda and Hild, P.}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117749}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117749}, - urldate = {2020-03-22}, - abstract = {Recent international and national policy initiatives promulgate the Circular Economy (CE) as the new central pathway towards sustainable modes of production and consumption. A growing number of commentators criticize the approach, despite its success in triggering discussions about product design (longevity, reparability) and about options for sharing goods and services. The criticism centers on the mere technological fix orientation of the CE approach and its ecological modernist idea of gradually adapting the current production system to material resource constraints - while leaving aside socio-political aspects of consumption as well as the possible need for sufficiencyoriented lifestyles. This paper argues for a broader understanding of CE and for the use of an institutional perspective inspired through practice theory, and presents a framework to assess the transformative potential of CE, encompassing its alternative/dissenting articulations in the noncorporate sector.}, - keywords = {Circular economy,Economic geography,Institutions,Methodological framework,Practice theory}, - file = {/Users/fabio/Zotero/storage/VUSPUCU3/full-text.pdf} -} - -@article{Schulz2020, - title = {Facilitating, Envisioning and Implementing Sustainable Development with Creative Approaches}, - author = {Schulz, Klaus-Peter and Mnisri, Kamel and Shrivastava, Paul and Sroufe, Robert}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - pages = {123762}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123762}, - urldate = {2020-08-24} -} - -@article{schulzValueCocreationCodestruction2021, - title = {Value Co-Creation and Co-Destruction in Service Ecosystems: {{The}} Case of the {{Reach Now}} App}, - author = {Schulz, Thomas and Zimmermann, Sina and B{\"o}hm, Markus and Gewald, Heiko and Krcmar, Helmut}, - year = {2021}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {170}, - pages = {120926}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120926}, - urldate = {2021-06-15}, - file = {/Users/fabio/Zotero/storage/IUSU46PJ/full-text.pdf} -} - -@book{Schumacher1973, - title = {Small Is Beautiful: {{Economics}} as {{If People Mattered}}}, - author = {Schumacher, Ernst Friedrich}, - year = {1973}, - publisher = {{London: Blond \& Briggs}}, - file = {/Users/fabio/Downloads/Schumacher1973SmallisBeautiful.pdf} -} - -@article{Schutte2020, - title = {Connections between Curiosity, Flow and Creativity}, - author = {Schutte, Nicola S. and Malouff, John M.}, - year = {2020}, - month = jan, - journal = {Personality and Individual Differences}, - volume = {152}, - pages = {109555}, - issn = {01918869}, - doi = {10.1016/j.paid.2019.109555} -} - -@article{Schuurman2013, - title = {Living Labs as Quasi-Experiments: Results from the {{Flemish LeYLab}}}, - author = {Schuurman, Dimitri and Baccarne, Bastiaan and Kawsar, Fahim and Seys, Constantijn and Veeckman, Carina and De Marez, Lieven and Ballon, Pieter}, - year = {2013}, - journal = {XXIV ISPIM Conference : Innovating in Global Markets: Challenges for Sustainable Growth}, - number = {June}, - abstract = {Living Labs are seen as open innovation systems adopting a user-centered approach (Schuurman et al., 2012), but academic research into the methodological elements is still lacking, resulting in a diversity of definitions, approaches and characteristics (F\o lstad, 2008; Almirall \& Wareham, 2011; Leminen \& Westerlund, 2012). Within this paper, based upon a literature review, we propose a conceptual model of a Living Lab constellation, facilitated by a given material and immaterial infrastructure, which facilitates Living Lab-cases that follow a quasi-experimental design. Through an in-depth case study analysis of the LeYLab Living Lab constellation and six separate cases running in the Living Lab, we assess the applicability of our model and abstract some general lessons learned. Our study demonstrates the potential of infrastructure-driven Living Labs, but also that the allignment of external utilizers with this infrastructure can be problematic.}, - keywords = {Domestication,Innovation Management,Law and Political Science,Living Labs,Open Innovation,Quasi-experiments,User-centric Innovation} -} - -@article{Schuurman2017, - title = {Innovation in the {{Public Sector}}: {{Exploring}} the {{Characteristics}} and {{Potential}} of {{Living Labs}} and {{Innovation Labs}}}, - author = {Schuurman, Dimitri and T{\~o}nurist, Piret}, - year = {2017}, - journal = {Technology Innovation Management Review}, - volume = {7}, - number = {1}, - pages = {7--14}, - issn = {1927-0321}, - abstract = {Living labs and innovation labs share many common traits and characteristics. Both con- cepts are linked to the public sector, and both concepts can be regarded as coping mech- anisms to deal with contemporary changes in the innovation landscape and within society as a whole. Both build on past initiatives and practices, but are also struggling to find their own clear identity and ``raison d'\^etre''. Because both concepts are largely prac- tice-driven, their theoretical underpinnings and foundations are mostly established after the fact: making sense of current practice rather than carefully researching and planning the further development. However, despite their similarities and common ground, most researchers treat living labs and innovation labs as separate literature streams. Here, start- ing from a review of the current issues and challenges with innovation in the public sec- tor, we look for links between both concepts by analyzing the current definitions, the predecessors, and the ``state of the art'' in terms of empirical research. Based on these findings, we summarize a set of similarities and differences between both concepts and propose a model towards more collaboration, mutual exchange, and integration of prac- tices between innovation labs, which can be regarded as initiators of innovation, and liv- ing labs, which can be regarded as executors of innovation. Thus, we add to the conceptual development of both concepts and propose a roadmap for the further integra- tion of both the theory and practice of living labs and innovation labs.}, - isbn = {9783737540599}, - keywords = {collaborative innovation,innovation labs,living labs,open innovation,public sector,user innovation} -} - -@article{schuurmanImpactLivingLab2016, - title = {The {{Impact}} of {{Living Lab Methodology}} on {{Open Innovation Contributions}} and {{Outcomes}}}, - author = {Schuurman, Dimitri and De Marez, Lieven and Ballon, Pieter}, - year = {2016}, - month = jan, - journal = {Technology Innovation Management Review}, - volume = {1}, - number = {6}, - pages = {7--16}, - publisher = {{Carleton University}}, - doi = {10.22215/timreview956}, - urldate = {2021-06-10}, - abstract = {Open innovation scholars as well as practitioners are still struggling with the practical im- plementation of open innovation principles in different contexts. In this article, we explore the value of a living lab approach for open innovation in small and medium-sized enter- prises (SMEs). Using a case study approach, we compared 27 SME projects conducted by iMinds Living Labs from 2011 to 2015. The results suggest that a real-life intervention and a multi-method approach \textendash{} both of which are methodological characteristics of living lab projects \textendash{} increase the chance of generating actionable user contributions for the innova- tion under development. Moreover, the results also suggest that a living lab project yields maximal value when evolving from concept towards prototype. Besides these exploratory findings, this article also demonstrates that living lab projects are a perfect "playground" to test and validate assumptions from the open innovation literature.}, - file = {/Users/fabio/Zotero/storage/ZVB7DY5G/full-text.pdf} -} - -@article{schwarzPlasticRecyclingCircular, - ids = {Schwarz2021}, - title = {Plastic Recycling in a Circular Economy; Determining Environmental Performance through an {{LCA}} Matrix Model Approach}, - author = {Schwarz, A E and Ligthart, T N and Godoi Bizarro, D and De Wild, P and Vreugdenhil, B and Van Harmelen, T}, - publisher = {{Pergamon}}, - doi = {10.1016/j.wasman.2020.12.020}, - urldate = {2021-01-13}, - keywords = {Assessment,Circular economy,Cycle,Environmental impact,Life,Life Cycle Assessment,Plastics,Recycling,Waste hierarchy}, - file = {/Users/fabio/Zotero/storage/QAZ8PG28/full-text.pdf} -} - -@article{schwarzUnderstandingBiodiversityecosystemService2017, - title = {Understanding Biodiversity-Ecosystem Service Relationships in Urban Areas: {{A}} Comprehensive Literature Review}, - author = {Schwarz, Nina and Moretti, Marco and Bugalho, Miguel N and Davies, Zoe G and Haase, Dagmar and Hack, Jochen and Hof, Angela and Melero, Yolanda and Pett, Tristan J and Knapp, Sonja}, - year = {2017}, - doi = {10.1016/j.ecoser.2017.08.014}, - urldate = {2021-12-13}, - abstract = {Positive relationships between biodiversity and urban ecosystem services (UES) are widely implied within both the scientific and policy literatures, along with the tacit suggestion that enhancing urban green infrastructure will automatically improve both biodiversity and UES. However, it is unclear how much published empirical evidence exists to support these assumptions. We conducted a review of studies published between 1990 and May 2017 that examined urban biodiversity ecosystem service (BES) relationships. In total, we reviewed 317 publications and found biodiversity and UES metrics mentioned 944 times. Only 228 (24\%) of the 944 mentions were empirically tested. Among these, 119 (52\%) demonstrated a positive BES relationship. Our review showed that taxonomic metrics were used most often as proxies for biodiversity, with very little attention given to functional biodiversity metrics. Similarly, the role of particular species, including non-natives, and specific functional traits are understudied. Finally, we found a paucity of empirical evidence underpinning urban BES relationships. As urban planners increasingly incorporate UES delivery consideration to their decision-making, researchers need to address these substantial knowledge gaps to allow potential trade-offs and synergies between biodiversity conservation and the promotion of UES to be adequately accounted for.}, - file = {/Users/fabio/Zotero/storage/EE2UYFIX/full-text.pdf} -} - -@inproceedings{schwobImplementingSystemicApproach2022, - title = {Implementing the Systemic Approach Supporting Territorial Resilience: The Case of the '{{Toile}}' Tool}, - shorttitle = {Implementing the Systemic Approach Supporting Territorial Resilience}, - booktitle = {2022 {{IEEE}} 28th {{International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}}/{{ITMC}}) \& 31st {{International Association For Management}} of {{Technology}} ({{IAMOT}}) {{Joint Conference}}}, - author = {Schwob, Mathilde and Kasmi, Fedoua and Dupont, Laurent and Vereecke, Jean-Fran{\c c}ois and Guidat, Claudine}, - editor = {Camargo, Mauricio and Dupont, Laurent and Morel, Laure}, - year = {2022}, - month = jun, - publisher = {{Universit\'e de Lorraine, Laboratroire ERPI}}, - address = {{Nancy, France}}, - urldate = {2022-11-07}, - abstract = {We are in an era of change, where climate, health, social and economic emergencies can no longer be ignored. Faced with the extent of these transitions, territories are in the front line. Through this paper, we will see what role territorial resilience plays in the regulation of territories in times of crisis and/or brutal shocks such as the Covid19 health crisis. As the main aim of this paper is to shed light on the factors of territorial resilience, we will then describe the different indicators that contribute to the approach to territorial resilience. Finally, we will establish the relevance of a systemic approach within this family of factors favoring territorial resilience. To do this, we will study the case of the Dunkirk territory and its systemic representation via the 'Toile' tool proposed by the Flanders-Dunkirk Region Urban Planning Agency (AGUR).}, - keywords = {Indicators,Resilience of territories,Systemic approach,the 'Toile' tool}, - file = {/Users/fabio/Zotero/storage/GVKES9PR/Schwob et al. - 2022 - Implementing the systemic approach supporting terr.pdf} -} - -@article{schynsMechanicalRecyclingPackaging2021, - title = {Mechanical {{Recycling}} of {{Packaging Plastics}}: {{A Review}}}, - shorttitle = {Mechanical {{Recycling}} of {{Packaging Plastics}}}, - author = {Schyns, Zo{\'e} O. G. and Shaver, Michael P.}, - year = {2021}, - journal = {Macromolecular Rapid Communications}, - volume = {42}, - number = {3}, - pages = {2000415}, - issn = {1521-3927}, - doi = {10.1002/marc.202000415}, - urldate = {2023-08-31}, - abstract = {The current global plastics economy is highly linear, with the exceptional performance and low carbon footprint of polymeric materials at odds with dramatic increases in plastic waste. Transitioning to a circular economy that retains plastic in its highest value condition is essential to reduce environmental impacts, promoting reduction, reuse, and recycling. Mechanical recycling is an essential tool in an environmentally and economically sustainable economy of plastics, but current mechanical recycling processes are limited by cost, degradation of mechanical properties, and inconsistent quality products. This review covers the current methods and challenges for the mechanical recycling of the five main packaging plastics: poly(ethylene terephthalate), polyethylene, polypropylene, polystyrene, and poly(vinyl chloride) through the lens of a circular economy. Their reprocessing induced degradation mechanisms are introduced and strategies to improve their recycling are discussed. Additionally, this review briefly examines approaches to improve polymer blending in mixed plastic waste streams and applications of lower quality recyclate.}, - copyright = {\textcopyright{} 2020 The Authors. Published by Wiley-VCH GmbH}, - langid = {english}, - keywords = {circular economy,extrusion,mechanical recycling,packaging,plastics,polymers}, - file = {/Users/fabio/Zotero/storage/K5GLXGZL/Schyns_Shaver_2021_Mechanical Recycling of Packaging Plastics.pdf} -} - -@book{Science, - title = {Low-{{Cost 3D Printing}} for Science, {{Education Sustainable}} Development}, - author = {Science, F O R}, - editor = {Canessa, E. and Fonda, C. and Zennaron, M}, - year = {2013}, - publisher = {{ICTP - The Abdus Salam International Centre for Theroretical Physics}}, - isbn = {92-95003-48-9}, - file = {/Users/fabio/Zotero/storage/AYTESCET/Low-Cost 3D Printing for science, Education Sustainable development.pdf} -} - -@techreport{Scott2012, - title = {Additive {{Manufacturing}} : {{Status}} and {{Opportunities}}}, - author = {Scott, Justin and Gupta, Nayanee and Newsome, Sherrica and Wohlers, Terry (Wohlers Associates, Inc) and Caffrey, Tim (Wohlers Associates, Inc)}, - year = {2012}, - number = {March}, - pages = {29}, - institution = {{Science and Technology Policy Institute}}, - file = {/Users/fabio/Zotero/storage/QYJUIEQZ/Additive Manufacturing Status and Opportunities.pdf} -} - -@article{Scott2019, - title = {Technology Adoption Factors in the Digitization of Popular Culture: {{Analyzing}} the Online Gambling Market}, - author = {Scott, Stephanie and Hughes, Paul and Hodgkinson, Ian and Kraus, Sascha}, - year = {2019}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {148}, - pages = {119717}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119717} -} - -@article{seayReviewCurrentChallenges2022, - title = {A Review of Current Challenges and Legal Advances in the Global Management of Plastic Waste}, - author = {Seay, Jeffrey and Ternes, Mary Ellen}, - year = {2022}, - month = apr, - journal = {Clean Technologies and Environmental Policy}, - volume = {24}, - number = {3}, - pages = {731--738}, - issn = {1618-9558}, - doi = {10.1007/s10098-022-02289-y}, - urldate = {2023-08-19}, - abstract = {Plastic waste is an ever-growing global challenge, perhaps second only to climate change in its scope and impact. Unmanaged plastic waste can be found on every continent and every ocean, from mountaintops to the seafloor. In addition to the plastic we can see, over time, plastics break down into smaller and smaller pieces called microplastics, and in that form, plastic has worked its way into the food chain\textemdash from plankton to humans. Plastics have been touted as recyclable, but in practice, recycling is difficult and has not proven to be an effective solution. Additionally, current laws and regulations are not sufficient in slowing the use\textemdash and misuse\textemdash of plastic. However, there is reason for optimism. New technologies like chemical recycling and new manufacturing approaches aim to make the process of recycling plastic easier and new and proposed regulations around the world are beginning to take a radically different approaches to addressing and recognizing the potential harm to the environment and human health done by plastics. In this review, we will address the current state of plastic waste management from a technical and policy perspective and look forward to potential changes and innovations on the horizon.}, - langid = {english}, - keywords = {Microplastic,Plastic,Policy,Recycling,Waste management}, - file = {/Users/fabio/Zotero/storage/UZQGK9J6/Seay_Ternes_2022_A review of current challenges and legal advances in the global management of.pdf} -} - -@article{Secondi2015, - title = {Household Food Waste Behaviour in {{EU-27}} Countries: {{A}} Multilevel Analysis}, - author = {Secondi, Luca and Principato, Ludovica and Laureti, Tiziana}, - year = {2015}, - journal = {Food Policy}, - volume = {56}, - pages = {25--40}, - publisher = {{Elsevier Ltd}}, - issn = {03069192}, - doi = {10.1016/j.foodpol.2015.07.007}, - abstract = {A large amount of food is lost along the entire food supply chain, causing serious environmental, economic and social impacts and most food is wasted during the final consumption phase especially in industrialized countries. Starting from the analysis of the main regulations and initiatives at various administrative levels and by introducing a two-level framework for modelling complex household food waste behaviour, this paper aims at investigating the behaviour of EU-27 citizens towards food waste by referring to the 2013 Flash Eurobarometer survey (n. 388).The multilevel statistical perspective enabled us to jointly consider factors at both individual and contextual levels as potential variables associated with food waste.Firstly, by analysing territorial variability it was possible to identify groups of countries characterized by similar behaviour patterns and therefore target them according to the need and exigency of public policy interventions.Secondly, at individual level it was observed that people living in towns and large cities tend to produce more waste thus emphasizing the need of diversifying policy interventions at local level according to the extent of urbanization. Moreover, education level, sorting practices, attitudes and concern regarding food waste proved to be associated with individuals' behaviour towards food waste.Thirdly, public-private partnerships as well as targeting community-based interventions to address food waste should be encouraged.}, - isbn = {0306-9192}, - pmid = {21436152}, - keywords = {EU-27 countries,Food waste,Multilevel analysis,Policy,Waste management}, - file = {/Users/fabio/Zotero/storage/XPTEYYHM/Household food waste behaviour in EU-27 countries A multilevel analysis.pdf} -} - -@article{SECUNDO2021, - title = {Threat or Opportunity? {{A}} Case Study of Digital-Enabled Redesign of Entrepreneurship Education in the {{COVID-19}} Emergency}, - author = {SECUNDO, Giustina and MELE, Gioconda and VECCHIO, Pasquale Del and ELIA, Gianluca and MARGHERITA, Alessandro and NDOU, Valentina}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120565}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120565}, - urldate = {2021-02-14}, - abstract = {The COVID-19 crisis has forced universities worldwide to seek urgent solutions to reconfigure traditional education programs for distance learning. The transformation process faces a number of complexities deriving from both institutional and contextual factors. It may generate threats and as well as opportunities to enhance the education system and prepare for potential future emergencies. In this article, we adopted a combined research approach to describe the experience of the Contamination Lab of the University of Salento (CLab@Salento), an entrepreneurship education program focused on innovative and technology-based entrepreneurship for university students. Moving from the analysis of the main challenges the pandemic generated for the institution, students and faculty, we illustrate the process of redesigning the entrepreneurial learning program by leveraging digital technologies. We show a new approach to entrepreneurial storytelling, pitching and business planning and development through digital technologies. We also report the outcomes of a student survey to highlight the strengths of the redesigned program and some weaknesses, especially associated with digital technologies' limitations in education, which represent areas for future improvement. The study contributes at theory level with a new discussion on digital-supported entrepreneurship education. At practitioner level, it offers insights on redesigning traditional university programs to effectively address emergencies.}, - keywords = {Contamination Lab,Covid-19,Digital technologies,Entrepreneurial learning,Entrepreneurial Mindset,Entrepreneurship education,VIDAS,Virtual elevator pitch} -} - -@article{secundoDigitalAcademicEntrepreneurship2020, - title = {Digital {{Academic Entrepreneurship}}: {{A}} Structured Literature Review and Avenue for a Research Agenda}, - author = {Secundo, Giustina and Rippa, Pierluigi and Cerchione, Roberto}, - year = {2020}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {157}, - pages = {120118}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120118}, - urldate = {2020-06-10}, - abstract = {This paper reviews the Academic Entrepreneurship literature according to the emergence of powerful Digital technologies, providing an overview of the state of research and outlining a future research agenda about Digital Academic Entrepreneurship. One hundred and sixty-five journal papers were initially extracted from Scopus and their content was analysed for the paper selection process by two researchers in parallel, plus a third one in case of uncertainty. Finally, fifty-nine papers dealing with digital academic entrepreneurship and published in a variety of academic journals have been analyzed through a content and a bibliometric analysis. Findings show that literature on Digital Academic Entrepreneurship is really scant and dominated by unrelated research. Content analysis provides the emergence of four major research streams: 1) Digital Technologies for Entrepreneurship Education; 2) The ``maker space movement'' for Academic Entrepreneurship; 3) Digital technologies for discovering entrepreneurial opportunities; 4) Creating entrepreneurial competences in the Digital ``University-based'' Entrepreneurial ecosystems. The paper presents the first attempt to provide a comprehensive structured literature review of the disruptive role of digital transformation for the Academic Entrepreneurship. Despite the growing literature on Digital Entrepreneurship, this research area is still fragmented and undertheorized. More systematic and holistic studies, considering both the technological, economic and the social aspects of Academic Entrepreneurship are required.}, - keywords = {Academic entrepreneurship,Bibliometric analysis,Digital academic entrepreneurship,Digital technologies,Digital transformation,Literature review,Software R,VOSviewer} -} - -@article{seeberPredictorsApplyingWinning2022, - title = {Predictors of Applying for and Winning an {{ERC Proof-of-Concept}} Grant: {{An}} Automated Machine Learning Model}, - shorttitle = {Predictors of Applying for and Winning an {{ERC Proof-of-Concept}} Grant}, - author = {Seeber, Marco and Alon, Ilan and Pina, David G. and Piro, Fredrik Niclas and Seeber, Michele}, - year = {2022}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {184}, - pages = {122009}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.122009}, - urldate = {2022-09-18}, - abstract = {Research often fails to be translated into applications because of lack of financial support. The Proof of Concept (PoC) funding scheme from the European Research Council (ERC) supports the early stages of the valorization process of the research conducted by its grantees. This article explores the factors that predict who will apply for ERC grants and which grant proposals will prove successful. By combining information from two datasets of 10,074 ERC grants (representing 8361 individual grantees) and 2186 PoC proposals, and using automated machine learning, we can identify the main predictors of the propensity to apply and to win. Doing so fills a void in the literature on likelihood to apply. The results reveal major differences between potential and actual beneficiaries, due to decisions about applying for a grant and evaluations of the proposals. The decision to apply is affected by the interaction between the characteristics of the PoC funding scheme, the ERC grantee, and his/her environment. Grantees in countries that invest little in innovation, with low cost of personnel, and strong collaboration in innovation are more likely to apply. Male grantees are more likely to apply but have similar chances of winning as women.}, - langid = {english}, - keywords = {Artificial intelligence,Automated machine learning,ERC,Likelihood to apply,PoC,Research funding,Research proposals evaluation,Research valorization}, - file = {/Users/fabio/Zotero/storage/HZZECKJB/Seeber et al_2022_Predictors of applying for and winning an ERC Proof-of-Concept grant.pdf;/Users/fabio/Zotero/storage/KGE34PAL/S0040162522005303.html} -} - -@article{Seifi2016, - title = {Overview of {{Materials Qualification Needs}} for {{Metal Additive Manufacturing}}}, - author = {Seifi, Mohsen and Salem, Ayman and Beuth, Jack and Harrysson, Ola and Lewandowski, John J.}, - year = {2016}, - journal = {Jom}, - volume = {68}, - number = {3}, - pages = {1--18}, - issn = {15431851}, - doi = {10.1007/s11837-015-1810-0}, - abstract = {This overview highlights some of the key aspects regarding materials qualification needs across the additive manufacturing (AM) spectrum. AM technology has experienced considerable publicity and growth in the past few years with many successful insertions for non-mission-critical applications. However, to meet the full potential that AM has to offer, especially for flight-critical components (e.g., rotating parts, fracture-critical parts, etc.), qualification and certification efforts are necessary. While development of qualification standards will address some of these needs, this overview outlines some of the other key areas that will need to be considered in the qualification path, including various process-, microstructure-, and fracture-modeling activities in addition to integrating these with lifing activities targeting specific components. Ongoing work in the Advanced Manufacturing and Mechanical Reliability Center at Case Western Reserve University is focusing on fracture and fatigue testing to rapidly assess critical mechanical properties of some titanium alloys before and after post-processing, in addition to conducting nondestructive testing/evaluation using micro-computerized tomography at General Electric. Process mapping studies are being conducted at Carnegie Mellon University while large area microstructure characterization and informatics (EBSD and BSE) analyses are being conducted at Materials Resources LLC to enable future integration of these efforts via an Integrated Computational Materials Engineering approach to AM. Possible future pathways for materials qualification are provided.}, - isbn = {1183701518100}, - file = {/Users/fabio/Zotero/storage/6YBA3NVT/Overview of Materials Qualification Needs for Metal Additive Manufacturing.pdf} -} - -@article{Seitz2005, - title = {Three-Dimensional Printing of Porous Ceramic Scaffolds for Bone Tissue Engineering}, - author = {Seitz, Hermann and Rieder, Wolfgang and Irsen, Stephan and Leukers, Barbara and Tille, Carsten}, - year = {2005}, - journal = {Journal of Biomedical Materials Research - Part B Applied Biomaterials}, - volume = {74}, - number = {2}, - pages = {782--788}, - issn = {00219304}, - doi = {10.1002/jbm.b.30291}, - abstract = {This article reports a new process chain for custom-made three-dimensional (3D) porous ceramic scaffolds for bone replacement with fully interconnected channel network for the repair of osseous defects from trauma or disease. Rapid prototyping and especially 3D printing is well suited to generate complex-shaped porous ceramic matrices directly from powder materials. Anatomical information obtained from a patient can be used to design the implant for a target defect. In the 3D printing technique, a box filled with ceramic powder is printed with a polymer-based binder solution layer by layer. Powder is bonded in wetted regions. Unglued powder can be removed and a ceramic green body remains. We use a modified hydroxyapatite (HA) powder for the fabrication of 3D printed scaffolds due to the safety of HA as biocompatible implantable material and efficacy for bone regeneration. The printed ceramic green bodies are consolidated at a temperature of 1250 degrees C in a high temperature furnace in ambient air. The polymeric binder is pyrolysed during sintering. The resulting scaffolds can be used in tissue engineering of bone implants using patient-derived cells that are seeded onto the scaffolds. This article describes the process chain, beginning from data preparation to 3D printing tests and finally sintering of the scaffold. Prototypes were successfully manufactured and characterized. It was demonstrated that it is possible to manufacture parts with inner channels with a dimension down to 450 microm and wall structures with a thickness down to 330 microm. The mechanical strength of dense test parts is up to 22 MPa.}, - isbn = {1552-4973}, - pmid = {15981173}, - keywords = {3D printing,Bone tissue engineering,Hydroxyapatite,Rapid prototyping,Scaffolds}, - file = {/Users/fabio/Zotero/storage/ATZACQ8Q/Seitz et al. - 2005 - Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering.pdf} -} - -@article{sejakWhyEcosystemServices2022, - title = {Why Ecosystem Services Should Be Counterbalanced by Nature's Thermodynamic Costs}, - author = {Sej{\'a}k, Josef and Pokorn{\'y}, Jan and Seeley, Karl and Skene, Keith R.}, - year = {2022}, - month = oct, - journal = {Ecosystem Services}, - volume = {57}, - pages = {101469}, - issn = {2212-0416}, - doi = {10.1016/j.ecoser.2022.101469}, - urldate = {2022-09-18}, - abstract = {The neoclassical, unilaterally-defined value concept of ecosystem services (ES) as `benefits' must be counterbalanced by a transparent and valid assessment of thermodynamic costs that result from degrading mature climax ecosystems. It is because willingness to pay-based methods of ES valuations produce unsustainable value relations that promote continuation of business-as-usual and further destruction of the fragments of nature. The authors argue that conversions from temperate forest to built environments result in economic losses of supporting and regulating ES that are more than two hundred times greater than the economic benefits. The loss of the cooling effect from evapotranspiration, replaced by warming from sensible heat creation in built environments, results in energetic impacts that are two orders of magnitude greater than those from greenhouse gas emissions. This is why, for sustainable landscape decision-making, the preference method results have to be compared to the costs that nature and humans have to bear due to anthropogenic changes in the natural landscape. Economic agents should start to pay for their `heat footprint', ie. for thermodynamic losses caused by their transformation of natural ecosystems. By incorporating solar energy dissipation losses as costs to ecosystems, the proper value relations can be achieved, with climax forests as the most valuable producers of supporting and regulating ES. Humans are unable to equivalently substitute such forests using human technologies.}, - langid = {english}, - keywords = {Climax ecosystems,Economic value,Ecosystem services,Evapotranspiration,Value relations}, - file = {/Users/fabio/Zotero/storage/R5AJE8DM/S2212041622000651.html} -} - -@incollection{Sells2009a, - title = {{{RepRap}}: {{The Replicating Rapid Prototyper}}: {{Maximizing Customizability}} by {{Breeding}} the {{Means}} of {{Production}}}, - booktitle = {Handbook of {{Research}} in {{Mass Customization}} and {{Personalization}}}, - author = {Sells, Ed and Bailard, Sebastien and Fabrication, Supermeta and Smith, Zach and Bowyer, Adrian and Olliver, Vik}, - year = {2009}, - month = dec, - pages = {568--580}, - publisher = {{World Scientific Publishing Company}}, - address = {{Cambridge, MA}}, - doi = {10.1142/9789814280280_0028}, - file = {/Users/fabio/Zotero/storage/PBNGFPDN/RepRap The replicating Rapid Prototyper Maximizing Customizability by Breeding the Means of Production.pdf} -} - -@article{selveforsUseUseUser2019, - title = {Use to Use \textendash{} {{A}} User Perspective on Product Circularity}, - author = {Selvefors, Anneli and Rexfelt, Oskar and Renstr{\"o}m, Sara and Str{\"o}mberg, Helena}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {223}, - pages = {1014--1028}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.117}, - urldate = {2020-06-18}, - abstract = {The discussion regarding product circularity is often framed from a production and business model perspective. In this paper, people's consumption processes are taken as a new point of departure and a re-framing of product circularity from a user perspective is proposed to complement the current narrative. This user-centred perspective emphasises the importance of product exchange, which underscores that products can be transferred in tight loops from one user to another, i.e. from Use to Use. It also highlights a number of challenges and practicalities that circular paths of consumption may entail for people in everyday life, and thus points to new opportunities for designing products and services that can create enabling preconditions that make it possible, more convenient, and more preferable for people to circulate products. These design opportunities can be categorised into four design strategies that can support the development of products and services fit for circular consumption processes. How the proposed reframing compares to the current narrative is discussed and recommendations for future research are proposed.}, - keywords = {Circular economy,Circular product design,Product circularity,Product lifetimes,Sustainable consumption,User-centred design} -} - -@article{Sen2007, - title = {Ashoka's Big Idea: {{Transforming}} the World through Social Entrepreneurship}, - author = {Sen, Pritha}, - year = {2007}, - journal = {Futures}, - volume = {39}, - number = {5}, - pages = {534--553}, - issn = {00163287}, - doi = {10.1016/j.futures.2006.10.013}, - abstract = {Ashoka: Innovators for the PublicTM was set up 25 yr ago by Bill Drayton, recently voted by the Centre for Public Leadership at Harvard University's John F. Kennedy School of Government in collaboration with US News and World Report among America's 25 Best Leaders. Ashoka coined the term 'social entrepreneur'. Its first insight was that there was nothing more powerful than a big social idea, but only if it is in the hands of a first-class social entrepreneur. The organisation works as a social venture capital fund, helping selected 'Fellows' with start-up funds to launch their ideas. The Fellows' direct impact is only the beginning; they are role models who inspire others to become active Changemakers. Ashoka weaves them together into a global community whose collaborations are far more powerful than the sum of its solo practitioner parts. This paper examines the evolution of Ashoka, its role as a driver of social change, and the various collaborations and institutions it has helped build and is still in the process of building to promote social entrepreneurship. \textcopyright{} 2006 Elsevier Ltd. All rights reserved.} -} - -@article{Sengers2019, - title = {Experimenting for Sustainability Transitions: {{A}} Systematic Literature Review}, - author = {Sengers, Frans and Wieczorek, Anna J. and Raven, Rob}, - year = {2019}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {145}, - pages = {153--164}, - issn = {00401625}, - doi = {10.1016/j.techfore.2016.08.031} -} - -@techreport{sengeSUBSCRIBERCOPYNOTREPRODUCTIONSUBSCRIBER, - title = {W {{I N T E R}} 2 0 0 7 {{SUBSCRIBER COPY-NOT FOR REPRODUCTION-SUBSCRIBER COPY-NOT FOR REPRODUCTION-SUBSCRIBER COPY-NOT FOR REPRODUCTION-SUBSCRIBER COPY-NOT FOR REPRODUCTION-SUBSCRIBER COPY-Collaborating For Systemic Change}}}, - author = {Senge, Peter M and Lichtenstein, Benyamin B and Kaeufer, Katrin and Bradbury, Hilary and Carroll, John S}, - file = {/Users/fabio/Zotero/storage/IM4D96ZD/Collaborating for systemic change.pdf} -} - -@article{Sengupta2007, - title = {A {{Short Review}} on {{Rubber}} / {{Clay Nanocomposites With Emphasis}} on {{Mechanical Properties}}}, - author = {Sengupta, R and Chakraborty, S and Bandyopadhyay, S and Dasgupta, S and Mukhopadhyay, R and Auddy, K and Deuri, a S}, - year = {2007}, - journal = {Engineering}, - volume = {47}, - eprint = {cond-mat/0406218}, - pages = {21--25}, - issn = {00323888}, - doi = {10.1002/pen}, - abstract = {The invention of Nylon-6/clay nanocomposites by the Toyota Research Group of Japan heralded a new chapter in the field of polymer composites. This article highlights the work done in the field of rubber/clay nanocomposites. The preparations of rubber/clay nanocomposites by solution blending, latex compounding, and melt intercalation are covered and a thorough discussion of the mechanical properties of the various rubber/clay nanocomposite systems is presented. Other properties such as barrier, dynamic mechanical behavior, and thermal properties are also discussed. Finally, the future trends in the rubber/clay nanocomposites are mentioned.}, - archiveprefix = {arxiv}, - isbn = {1548-2634}, - pmid = {16277439}, - file = {/Users/fabio/Zotero/storage/SHS5QPYX/Thermal and mechanical degradation during polymer extrusion processing.pdf} -} - -@article{seppeltQuantitativeReviewEcosystem2011, - title = {A Quantitative Review of Ecosystem Service Studies: Approaches, Shortcomings and the Road Ahead}, - author = {Seppelt, Ralf and Dormann, Carsten F. and Eppink, Florian V. and Lautenbach, Sven and Schmidt, Stefan}, - year = {2011}, - month = jun, - journal = {Journal of Applied Ecology}, - volume = {48}, - number = {3}, - pages = {630--636}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {00218901}, - doi = {10.1111/j.1365-2664.2010.01952.x}, - urldate = {2021-04-23}, - abstract = {1. Ecosystem services are defined as the benefits that humans obtain from ecosystems. Employing the ecosystem service concept is intended to support the development of policies and instruments that integrate social, economic and ecological perspectives. In recent years, this concept has become the paradigm of ecosystem management. 2. The prolific use of the term 'ecosystem services' in scientific studies has given rise to concerns about its arbitrary application. A quantitative review of recent literature shows the diversity of approaches and uncovers a lack of consistent methodology. 3. From this analysis, we have derived four facets that characterise the holistic ideal of ecosystem services research: (i) biophysical realism of ecosystem data and models; (ii) consideration of local trade-offs; (iii) recognition of off-site effects; and (iv) comprehensive but critical involvement of stakeholders within assessment studies. 4. These four facets should be taken as a methodological blueprint for further development and discussion. They should critically reveal and elucidate what may often appear to be ad-hoc approaches to ecosystem service assessments. 5. Synthesis and applications: Based on this quantitative review, we provide guidelines for further development and discussions supporting consistency in applications of the ecosystem service concept as well as the credibility of results, which in turn can make it easier to generalise from the numerous individual studies. \textcopyright{} 2011 The Authors. Journal of Applied Ecology \textcopyright{} 2011 British Ecological Society.}, - keywords = {Conservation policy,Ecosystem functioning,Ecosystem management,Ecosystem service assessment,Environmental values,Natural capital,Natural resource management} -} - -@article{serdecznyNumericalModelingPolymer2020, - title = {Numerical Modeling of the Polymer Flow through the Hot-End in Filament-Based Material Extrusion Additive Manufacturing}, - author = {Serdeczny, Marcin and Comminal, Rapha{\"e}l and Mollah, Md and Pedersen, David and Spangenberg, Jon}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - volume = {36}, - pages = {101454}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2020.101454}, - urldate = {2020-08-09}, - keywords = {computational fluid dynamics,fused filament fabrication,nozzle flow,simulation} -} - -@article{serdecznyViscoelasticSimulationOptimisation2022, - title = {Viscoelastic Simulation and Optimisation of the Polymer Flow through the Hot-End during Filament-Based Material Extrusion Additive Manufacturing}, - author = {Serdeczny, Marcin P. and Comminal, Rapha{\"e}l and Mollah, Md. Tusher and Pedersen, David B. and Spangenberg, Jon}, - year = {2022}, - month = apr, - journal = {https://doi.org/10.1080/17452759.2022.2028522}, - volume = {17}, - number = {2}, - pages = {205--219}, - publisher = {{Taylor \& Francis}}, - issn = {1745-2759}, - doi = {10.1080/17452759.2022.2028522}, - urldate = {2022-02-09}, - abstract = {This paper presents a novel Computational Fluid Dynamics (CFD) model that simulates the non-isothermal flow of a viscoelastic fluid through the hot-end in filament-based Material Extrusion Additive...}, - keywords = {computational fluid dynamics,Fused filament fabrication,hot-end,nozzle flow,numerical simulations,viscoelastic flow} -} - -@article{serna-guerreroOvercomingDataGaps2022, - title = {Overcoming Data Gaps for an Efficient Circular Economy: {{A}} Case Study on the Battery Materials Ecosystem}, - shorttitle = {Overcoming Data Gaps for an Efficient Circular Economy}, - author = {{Serna-Guerrero}, Rodrigo and Ikonen, Sara and Kallela, Oona and Hakanen, Esko}, - year = {2022}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {374}, - pages = {133984}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133984}, - urldate = {2022-09-25}, - abstract = {Data exchange and utilization are considered fundamental for the efficient development of industrial ecosystems. However, there are significant data gaps that currently prevent the implementation of circular economy models in practice. The present work is a first attempt to identify the sources of such barriers, using the battery materials industrial ecosystem in Finland as case study. A visual grounded theory model was created to formally analyze the collected interview answers from representatives of companies along the value chain. In summary, it was found that: i) companies gather information relevant for other stakeholders; ii) there are no incentives to openly share data, which is considered a valuable asset; iii) actors lack clarity on which data is relevant at a system-level; and iv) there is no consensus on which format can data be shared to efficiently promote circular economy strategies. To address the identified barriers, it is hereby proposed for the first time that parametrization is a strategy to promote data exchange between stakeholders. As an illustrative example, statistical entropy is presented as a mean to exchange data of battery material composition. Properly designed parameters could be used to codify relevant data without a negative impact on the confidentiality of companies, while at the same time providing clarity of purpose for the circular economy. Thus, this article introduces a novel perspective for the implementation of bottom-up data exchange practices in industry.}, - langid = {english}, - keywords = {Circular economy,Circularity parameters,Data exchange,Industrial ecosystem,Rechargeable batteries}, - file = {/Users/fabio/Zotero/storage/YY2HVKXW/Serna-Guerrero et al_2022_Overcoming data gaps for an efficient circular economy.pdf;/Users/fabio/Zotero/storage/WJPANEIH/S0959652622035569.html} -} - -@article{Serra2013, - title = {High-Resolution {{PLA-based}} Composite Scaffolds via 3-{{D}} Printing Technology}, - author = {Serra, T. and Planell, J.a. and Navarro, M.}, - year = {2013}, - month = mar, - journal = {Acta Biomaterialia}, - volume = {9}, - number = {3}, - pages = {5521--5530}, - publisher = {{Acta Materialia Inc.}}, - issn = {17427061}, - doi = {10.1016/j.actbio.2012.10.041}, - urldate = {2014-02-06}, - file = {/Users/fabio/Zotero/storage/QQ42B2RA/Serra, Planell, Navarro - 2013 - High-resolution PLA-based composite scaffolds via 3-D printing technology.pdf} -} - -@article{Serra2014, - title = {Relevance of {{PEG}} in {{PLA-based}} Blends for Tissue Engineering {{3D-printed}} Scaffolds}, - author = {Serra, Tiziano and {Ortiz-Hernandez}, Monica and Engel, Elisabeth and a. Planell, Josep and Navarro, Melba}, - year = {2014}, - month = may, - journal = {Materials Science and Engineering: C}, - volume = {38}, - pages = {55--62}, - publisher = {{Elsevier B.V.}}, - issn = {09284931}, - doi = {10.1016/j.msec.2014.01.003}, - urldate = {2014-02-20}, - keywords = {3D-printing,Polylactic acid,Rapid prototyping,Scaffold,Surface characterization}, - file = {/Users/fabio/Zotero/storage/W4LZU9FS/Serra et al. - 2014 - Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds.pdf} -} - -@incollection{Serrao2019, - title = {A Low-Cost Smart Parking Solution for Smart Cities Based on Open Software and Hardware}, - author = {Serr{\~a}o, Carlos and Garrido, Nuno}, - year = {2019}, - pages = {15--25}, - doi = {10.1007/978-3-030-14757-0_2} -} - -@article{setoLowNetZeroCarbon2021, - title = {From {{Low-}} to {{Net-Zero Carbon Cities}}: {{The Next Global Agenda}}}, - author = {Seto, Karen C. and Churkina, Galina and Hsu, Angel and Keller, Meredith and Newman, Peter W.G. and Qin, Bo and Ramaswami, Anu}, - year = {2021}, - month = oct, - journal = {https://doi.org/10.1146/annurev-environ-050120-113117}, - volume = {46}, - number = {1}, - pages = {377--415}, - publisher = {{Annual Reviews}}, - doi = {10.1146/ANNUREV-ENVIRON-050120-113117}, - urldate = {2021-11-07}, - abstract = {This article provides a systematic review of the literature on net-zero carbon cities, their objectives and key features, current efforts, and performance. We discuss how net-zero differs from low-...}, - keywords = {carbon-free city,carbon-neutral city,climate-neutral city,deep decarbonization,net-zero cities,zero-carbon city} -} - -@article{seymourIncorporatingCitizenScience2022, - title = {Incorporating Citizen Science to Advance the {{Natural Capital}} Approach}, - author = {Seymour, Valentine and Willls, Betheney and Wilkin, Paul and Burt, Peter and Ikin, Ed and Stevenson, Philip C.}, - year = {2022}, - month = apr, - journal = {Ecosystem Services}, - volume = {54}, - pages = {101419}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2022.101419}, - urldate = {2022-03-13} -} - -@article{Shabanpour2019, - title = {Ranking Sustainable Suppliers Using Congestion Approach of Data Envelopment Analysis}, - author = {Shabanpour, Hadi and Fathi, Amirali and Yousefi, Saeed and Saen, Reza Farzipoor}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {240}, - pages = {118190}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118190} -} - -@article{Shabbir2021, - title = {Closed-Loop Supply Chain Network Design with Sustainability and Resiliency Criteria}, - author = {Shabbir, Muhammad Salman and Mahmood, Arshad and Setiawan, Roy and Nasirin, Chairun and Rusdiyanto, Rusdiyanto and Gazali, Gazali and Arshad, Mohd Anuar and Khan, Shahid and Batool, Fatima}, - year = {2021}, - month = mar, - journal = {Environmental Science and Pollution Research}, - pages = {1--16}, - publisher = {{Springer}}, - issn = {0944-1344}, - doi = {10.1007/s11356-021-12980-0}, - urldate = {2021-03-29}, - abstract = {Today, the research on the closed-loop supply chain network design with sustainability and resiliency criteria is a very active research topic. This paper provides a new closed-loop supply chain under uncertainty with the use of resiliency, sustainability, and reliability dimensions among the first studies. To model this problem, a two-stage stochastic programming approach is used. To create robust solutions against uncertainty, a conditional value at risk criterion is contributed. The proposed model aims to minimize the total cost, environmental pollution, and energy consumption while maximizing the job opportunities as the social factor. In addition to the sustainability goals, the energy consumption is considered to be the last objective to be minimized. To show the applicability of the proposed model, an automobile assembler industry is applied. To solve the model, the Lp-metric method is employed to transform this multi-objective model into a single objective one. Since this closed-loop supply chain model is complex and NP-hard, a Lagrangian relaxation method with fix-and-optimize heuristic is employed to find the upper and lower bounds for the model via different random test problems. With an extensive analysis, the proposed model shows an improvement to the total cost, CO2 emissions, job opportunities and energy consumption.}, - keywords = {Atmospheric Protection/Air Quality Control/Air Pol,Ecotoxicology,Environment,Environmental Chemistry,Environmental Health,general,Waste Water Technology / Water Pollution Control /} -} - -@article{shaddyTradeOffsChoice2021, - title = {Trade-{{Offs}} in {{Choice}}}, - author = {Shaddy, Franklin and Fishbach, Ayelet and Simonson, Itamar}, - year = {2021}, - month = jan, - journal = {Annual Review of Psychology}, - volume = {72}, - number = {1}, - pages = {181--206}, - publisher = {{Annual Reviews}}, - issn = {0066-4308}, - doi = {10.1146/annurev-psych-072420-125709}, - urldate = {2021-01-13}, - abstract = {To explain trade-offs in choice, researchers have proposed myriad phenomena and decision rules, each paired with separate theories and idiosyncratic vocabularies. Yet most choice problems are ultimately resolved with one of just two types of solutions: mixed or extreme. For example, people adopt mixed solutions for resolving trade-offs when they allow exercising to license indulgence afterward (balancing between goals), read different literary genres (variety seeking), and order medium-sized coffees (the compromise effect). By contrast, when people adopt extreme solutions for resolving these exact same trade-offs, they exhibit highlighting, consistency seeking, and compromise avoidance, respectively. Our review of the choice literature first illustrates how many seemingly unrelated phenomena actually share the same underlying psychology. We then identify variables that promote one solution versus the other. These variables, in turn, systematically influence which of opposite choice effects arise (e.g., highlighting versus balancing). Finally, we demonstrate how several mistakes people purport to make can potentially instead be reinterpreted as mixed solutions for resolving trade-offs. We conclude with guidance for distinguishing mistakes from mixed solutions.}, - keywords = {behavioral decision theory,decision making,judgment,motivation,substitution,trade-offs} -} - -@article{Shah2004, - title = {Comparision of the {{Flow}} in {{Co-Rotating}} and {{Counter-Rotating Twin- Screw Extruders}}}, - author = {Shah, A and Gupta, M}, - year = {2004}, - journal = {Antec}, - volume = {1}, - number = {Table 1}, - pages = {443--447}, - abstract = {Polymeric flow in intermeshing co-rotating and counter-rotating twin-screw extruders is simulated. Effect of the elongational viscosity of the polymer on the flow in the two extruders is included by using independent Carreau models for the shear and elongational viscosities of the polymer. It is found that for similar screw crosssections and rotational speed, axial velocity as well as degree of mixing is higher in the co-rotating extruder, whereas pressure build up is higher in the counter-rotating extruder. In contrast to the flow in the co-rotating extruder, where the velocity was always maximum at the screw tips, in the counter rotating extruder the velocity was higher in the intermeshing zone.}, - keywords = {600}, - file = {/Users/fabio/Zotero/storage/SS2JPY5A/Comparision of the Flow in Co-Rotating and Counter-Rotating Twin- Screw Extruders.pdf} -} - -@article{Shah2019, - title = {Large-Scale {{3D}} Printers for Additive Manufacturing: Design Considerations and Challenges}, - author = {Shah, J. and Snider, B. and Clarke, T. and Kozutsky, S. and Lacki, M. and Hosseini, A.}, - year = {2019}, - journal = {The International Journal of Advanced Manufacturing Technology}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {0268-3768}, - doi = {10.1007/s00170-019-04074-6}, - keywords = {3d printing,{3D printing,Additive manufacturing,Material extrus},additive manufacturing,large-format additive manufacturing,material extrusion,rapid prototyping}, - file = {/Users/fabio/Zotero/storage/IDMZYIE3/large-scale 3d printers for additive manufacturing- design considerations and challenges.pdf} -} - -@incollection{Shah2019a, - title = {Design and {{Operation}} of {{Technoecological Synergy}}: {{A No2 Case Study}}}, - booktitle = {Computer {{Aided Chemical Engineering}}}, - author = {Shah, U. D. and Bakshi, B. R.}, - year = {2019}, - month = jan, - volume = {47}, - pages = {193--198}, - publisher = {{Elsevier}}, - issn = {15707946}, - doi = {10.1016/B978-0-12-818597-1.50031-X}, - urldate = {2021-09-20}, - abstract = {Over last several decades, engineering design has expanded to not only make processes more profitable but to reduce environmental impact of human activities. Despite these efforts, human impact on nature is still significant as engineering tends to ignore nature's capacity to provide goods and services which leads to ecological overshoot. Hence, in order to design truly sustainable systems, one should consider alternatives that can help reduce ecological overshoot and avoid unintended consequences. Nature-based solutions like forest, wetlands, etc. can help alleviate ecological capacity and avoid unintended consequences, as nature has always been ``sustainable''. In order to use these ecological solutions, traditional large-scale chemical processing facilities have to embrace and respect the intermittent seasonal availability of ecological goods and services. In this work, we consider a chloralkali production with attached utility generator that is located in Freeport Texas, which is a nitrogen dioxide (NO2) non-attainment zone where NO2 emissions are not permitted. Utility generation unit emits nitrogen dioxide and the goal of the operator is to limit emission of NO2 for which we explore two alternatives: 1) a technological unit known as Selective Catalytic Reactor (SCR) 2) an ecological solution in form of forest ecosystem. We use iTree-Eco and Forest Vegetation Simulator (FVS) to model monthly capacity of forest ecosystem to take up NO2 emissions over a period of 20 years. Combining the technological and ecological models, we solve a stochastic mixed integer design and operation planning problem to find optimal combination of technology and nature. This novel synergistic solution is economically and environmentally superior manufacturing approach compared to traditional systems that ignore nature's ability to provide goods and services. These results demonstrate the need to shift from traditional engineering paradigm of out pacing nature to adopting the dynamics of nature to get maximum sustainable profitability.}, - keywords = {Design under uncertainty,Ecosystem services,Sustainability,Techno-ecological synergy} -} - -@article{shahAssessingEnvironmentalServices2022, - title = {Assessing Environmental Services and Disservices of Urban Street Trees. an Application of the Emergy Accounting}, - author = {Shah, Aamir Mehmood and Liu, Gengyuan and Huo, Zhaoman and Yang, Qing and Zhang, Wen and Meng, Fanxin and Yao, Lin and Ulgiati, Sergio}, - year = {2022}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {186}, - pages = {106563}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106563}, - urldate = {2022-08-11}, - abstract = {The urban green infrastructure (UGI), with special focus on street trees, is a very complex engineered ecosystem which plays an important role in generating ecosystem services and, if improperly managed, a number of dis-services to be prevented. This study applies the Emergy Accounting method to the cost and benefit evaluation, in order to establish a non-monetary ``supply-side'' assessment framework capable to assign an environmental value to each kind of services provided by urban forests and other green infrastructures. Further, the study classifies urban street tree integrated valuation framework into ecosystem services, avoided cost for human health and biodiversity damage, growing/maintenance cost and ecosystem dis-services. In a like manner, the interaction among the three different component flows in street tree ecosystems (costs, benefits and associated dis-services) are compared by means of a ternary diagram. Taking the case of the street ecosystem in Beijing, China, eleven typical urban tree species, including oak, maple, Chinese ash and linden, are selected for services and dis-services evaluation. Results show that, in general, UGI provides a large number of services to urban population, but it may also generate dis-services affecting human health, well-being and biodiversity when tree selection, location and management is not accurate. Results may help improve management practices which enhance the overall ecosystem service provision by urban forests not only in Beijing as case study but also in other cities by means of appropriate management.}, - langid = {english}, - keywords = {Dis-services,Ecosystem services,Emergy,Urban street trees}, - file = {/Users/fabio/Zotero/storage/Y4W3VRBN/Shah et al_2022_Assessing environmental services and disservices of urban street trees.pdf;/Users/fabio/Zotero/storage/9ERM7AL2/S0921344922004001.html} -} - -@article{shahidFrugalInnovationSource2023, - title = {Frugal Innovation as a Source of Sustainable Entrepreneurship to Tackle Social and Environmental Challenges}, - author = {Shahid, Muhammad Shehryar and Hossain, Mokter and Shahid, Subhan and Anwar, Tehreem}, - year = {2023}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {406}, - pages = {137050}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137050}, - urldate = {2023-05-01}, - abstract = {Sustainable entrepreneurs have increasingly faced challenges in achieving triple-bottom-line objectives. The study portrays frugal innovation as a source to foster sustainable entrepreneurship to move the debate beyond discussing the challenges of sustainable entrepreneurship. As such, we investigate how sustainable entrepreneurship with frugal innovation can tackle social and environmental challenges in the context of a developing country. An inductive approach with multiple case-method is used in this study. The results show that entrepreneurship based on frugal innovation leads to several social outcomes, such as female empowerment, improved quality of life, and access to affordable healthcare for low-income customers as well as environmental outcomes, such as sustainable products and production techniques. Furthermore, sustainable entrepreneurship creates new markets in developing countries and promotes inclusive growth. Our research reveals that sustainable entrepreneurship if based on frugal innovation, serves dual purposes. It enables businesses to make a profit and contribute to solving societal problems simultaneously. Juxtaposing with frugal innovation, we expand the field of sustainable entrepreneurship by shifting the debate from barriers to potential sources and enablers. Based on the findings, we provide implications and future research directions.}, - langid = {english}, - keywords = {Developing countries,Frugal innovation,Sustainability,Sustainable entrepreneurship}, - file = {/Users/fabio/Zotero/storage/MLGSWIQX/Shahid et al_2023_Frugal innovation as a source of sustainable entrepreneurship to tackle social.pdf;/Users/fabio/Zotero/storage/G8ML9454/S0959652623012088.html} -} - -@inproceedings{Shahrubudin2019, - title = {An Overview on {{3D}} Printing Technology: {{Technological}}, Materials, and Applications}, - booktitle = {Procedia {{Manufacturing}}}, - author = {Shahrubudin, N. and Lee, T. C. and Ramlan, R.}, - year = {2019}, - volume = {35}, - pages = {1286--1296}, - publisher = {{Elsevier B.V.}}, - issn = {23519789}, - doi = {10.1016/j.promfg.2019.06.089}, - urldate = {2021-06-07}, - abstract = {Digital fabrication technology, also referred to as 3D printing or additive manufacturing, creates physical objects from a geometrical representation by successive addition of materials. 3D printing technology is a fast-emerging technology. Nowadays, 3D Printing is widely used in the world. 3D printing technology increasingly used for the mass customization, production of any types of open source designs in the field of agriculture, in healthcare, automotive industry, locomotive industry and aviation industries. 3D printing technology can print an object layer by layer deposition of material directly from a computer aided design (CAD) model. This paper presents the overview of the types of 3D printing technologies, the application of 3D printing technology and lastly, the materials used for 3D printing technology in manufacturing industry.}, - keywords = {3D Printing,Additive manufacuting,Manufacturing industy}, - file = {/Users/fabio/Zotero/storage/FYTVCNSI/full-text.pdf} -} - -@article{shahStakeholderEngagementStrategy2022, - title = {Stakeholder Engagement Strategy of Technology Firms: {{A}} Review and Applied View of Stakeholder Theory}, - author = {Shah, Muhammad Umair and Guild, Paul D.}, - year = {2022}, - month = jun, - journal = {Technovation}, - volume = {114}, - pages = {102460}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2022.102460}, - urldate = {2022-01-25} -} - -@article{shamsPlasticPollutionCOVID192021, - title = {Plastic Pollution during {{COVID-19}}: {{Plastic}} Waste Directives and Its Long-Term Impact on the Environment}, - shorttitle = {Plastic Pollution during {{COVID-19}}}, - author = {Shams, Mehnaz and Alam, Iftaykhairul and Mahbub, Md Shahriar}, - year = {2021}, - month = oct, - journal = {Environmental Advances}, - volume = {5}, - pages = {100119}, - issn = {26667657}, - doi = {10.1016/j.envadv.2021.100119}, - urldate = {2022-10-17}, - abstract = {Majority of the million tons of plastic produced each year is being disposed after single-use. Plastic bottle, bags, food containers, gloves, and cup that end up in landfills and environment could linger for hundreds to thousands of years. Moreover, COVID-19 pandemic caused by the novel coronavirus (SARS-CoV-2), will also exacerbate the global plastic pollution as the use of personal protective equipment (PPE i.e., gloves, masks) became mandatory to prevent the spread of the virus. Plastic eventually breaking down in micro \& nanoscopic bits due to physical or chemical or biological actions in the environment, can enter animal and human food web. So, plastic manage\- ment programs need to be more robust with a focus on the prevention of the micro and nanoplastics entrance into the environment and food web. In the present pandemic situation, it is even more necessary to know about how much plastic waste is being generated and how different countries are coping up with their plastic waste management. In this review, we have elucidated how global plastic production rise during COVID-19 and how it would contribute to short and long-term impacts on the environment. Plastic pollution during the pandemic will increase the GHS emissions in the incineration facilities. Improper disposal of plastics into the oceans and lands would endanger the marine species and subsequently human lives. We have also assessed how the increased plastic pollution will aggravate the micro and nanoscale plastic problem, which have now become an emerging concern. This review will be helpful for people to understand the plastic usage and its subsequent consequences in the environment in a pandemic like COVID-19.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/TQRZ38UQ/Shams et al. - 2021 - Plastic pollution during COVID-19 Plastic waste d.pdf} -} - -@article{shanMobileAppaidedDesign2021, - title = {Mobile App-Aided Design Thinking Approach to Promote Upcycling in {{Singapore}}}, - author = {Shan, Xin and Neo, Vienna Zhi Yu and Yang, En-Hua}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {317}, - pages = {128502}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128502}, - urldate = {2021-08-24}, - abstract = {The yearly amount of waste getting disposed of in Singapore is rising, which poses a waste management issue to be tackled and overcome. The practice of upcycling increases the value of objects and materials and hence, can divert these materials from landfills. This study investigated individuals' and businesses' motivation, interest and participation in upcycling in Singapore. Firstly an overview of the relatively nascent upcycling studies was conducted. The design thinking approach was then employed, which helped to uncover stakeholders' needs and frustrations. Through the implementation of the design thinking approach, this study chose and prototyped a mobile app-aided waste marketplace platform that aimed to reduce the barriers of upcycling by aggregating the materials available in the market and crowdsourcing upcycling know-how. Generally, the results found from the user testing of the platform were positive and encouraging. Feedbacks from individuals showed that the platform can help to improve key factors including raising the awareness of the upcycling issues, and also enable such practices by providing better usability and promoting the upcycling culture. Evaluations from business also corroborate these aspects. The results indicated the potential feasibility and impact of such a solution to promote upcycling in Singapore.} -} - -@article{shanMobileAppaidedRisks2020, - title = {Mobile App-Aided Risks, Attitudes, Norms, Abilities and Self-Regulation ({{RANAS}}) Approach for Recycling Behavioral Change in {{Singapore}}}, - author = {Shan, Xin and Ang, Wei Loong and Yang, En-Hua}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105049}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105049}, - urldate = {2020-07-21} -} - -@article{sharafiMultiscaleModelingApproach2022, - title = {A Multiscale Modeling Approach of the {{Fused Filament Fabrication}} Process to Predict the Mechanical Response of {{3D}} Printed Parts}, - author = {Sharafi, S. and Santare, M.H. and Gerdes, J. and Advani, S.G.}, - year = {2022}, - month = mar, - journal = {Additive Manufacturing}, - volume = {51}, - pages = {102597}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102597}, - urldate = {2022-01-25} -} - -@article{sharifiNeighborhoodSustainabilityAssessment2021, - ids = {sharifi2021a}, - title = {Neighborhood {{Sustainability Assessment Tools}}: {{A Review}} of {{Success Factors}}}, - author = {SHARIFI, Ayyoob and Dawodu, Ayotunde and Cheshmehzangi, Ali}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {293}, - pages = {125912}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.125912}, - urldate = {2021-02-14}, - keywords = {Assessment tools,BREEAM Communities,CASBEE-UD,LEED-ND,Neighborhood sustainability,Successes}, - file = {/Users/fabio/Zotero/storage/BCFH5DX6/Sharifi et al. - 2021 - Neighborhood sustainability assessment tools A re.pdf;/Users/fabio/Zotero/storage/7XI57L8R/S0959652621001323.html} -} - -@article{sharifiTradeoffsConflictsUrban2020, - title = {Trade-Offs and Conflicts between Urban Climate Change Mitigation and Adaptation Measures: {{A}} Literature Review}, - author = {Sharifi, Ayyoob}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - pages = {122813}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122813}, - urldate = {2020-07-13} -} - -@article{Sharma2016, - title = {Utility and Challenges of 3 {{D Printing}}}, - author = {Sharma, Aman}, - year = {2016}, - month = feb, - journal = {IOSR Journal of Mechanical and Civil Engineering}, - volume = {02}, - number = {02}, - pages = {49--53}, - publisher = {{IOSR Journals}}, - issn = {2320334X}, - doi = {10.9790/1684-15010020249-53}, - urldate = {2021-06-07}, - abstract = {This paper is all about the advanced technology of 3D printing, their implementation in the respective fields and its significant contribution in the global world of science and medical. In this paper we will deal with the term Additive Manufacturing or 3D Printing and a little bit of its history. Its various applications along with the type of materials used in the 3-D are also described. We shall also throw some light on the numerous opportunities provided by this emerging technology as well as the risks and challenges related to it. Its environmental aspects are also shown in the paper. Lastly the scope and scenario in future potential of 3D printing is also evaluated.} -} - -@article{Sharma2020, - title = {Deciphering the Advances in Bioaugmentation of Plastic Wastes}, - author = {Sharma, Bhasha and Jain, Purnima}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {275}, - pages = {123241}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123241}, - urldate = {2020-08-09}, - abstract = {Bioaugmentation is the restorative strategy to deal with gigantic amount of plastic wastes in landfills and oceans. The extensive utilization of conventional plastics in versatile commercial applications possesses excessive atrocities to the environment and sources of fossil fuels. Conventional plastics can be replaced using bioplastics which are originated during production of renewable resources. Although, the technology for plastic wastes has been improvised but the proliferation in population of world over 2050 i.e. upto 9 million which requires stipulation in production of plastics and ultimately it increases plastic wastes quantity. The biodegradation of renewable resources like agricultural wastes and their properties enable it to be utilized more in contrary to traditional plastics. The biodegradation of plastics is influenced by various chemical and physical parameters. Eventually, the future of mankind will reckon on the generation of polymers that are sustainable which can be extracted from renewable feed stocks that would be secured, recycled, reused and most importantly environmental benign. This robust review has thrown light on the recent development and challenges in biodegradation including the biodegradation mechanism of plastics as well as bioplastics.} -} - -@article{Sharma2020a, - title = {Internet of {{Things}} ({{IoT}}) Adoption Barriers of Smart Cities' Waste Management: {{An Indian}} Context}, - author = {Sharma, Manu and Joshi, Sudhanshu and Kannan, Devika and Govindan, Kannan and Singh, Rohit and Purohit, H.C.}, - year = {2020}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {270}, - pages = {122047}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122047}, - urldate = {2020-06-10}, - file = {/Users/fabio/Zotero/storage/MATVD5XD/Internet of Things (IoT) adoption barriers of smart cities’ waste management- An Indian context.pdf} -} - -@article{sharmaChallengesOpportunitiesInnovations2020, - title = {Challenges, Opportunities, and Innovations for Effective Solid Waste Management during and Post {{COVID-19}} Pandemic}, - author = {Sharma, Hari Bhakta and Vanapalli, Kumar Raja and Cheela, VR Shankar and Ranjan, Ved Prakash and Jaglan, Amit Kumar and Dubey, Brajesh and Goel, Sudha and Bhattacharya, Jayanta}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105052}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105052}, - urldate = {2020-08-09}, - abstract = {The crisis brought upon by the COVID-19 pandemic has altered global waste generation dynamics and therefore has necessitated special attention. The unexpected fluctuations in waste composition and quantity also require a dynamic response from policymakers. This study highlights the challenges faced by the solid waste management sector during the pandemic and the underlying opportunities to fill existing loopholes in the system. The study presents specific cases for biomedical waste, plastic waste, and food waste management - all of which have been a major cause of concern during this crisis. Further, without active citizen participation and cooperation, commingled virus-laden biomedical waste with the regular solid waste stream pose significant negative health and safety issues to sanitation workers. Single-use plastic usage is set to bounce back due to growing concerns of hygiene, particularly from products used for personal protection and healthcare purposes. It is expected that household food waste generation may reduce due to increased conscious buying of more non-perishable items during lockdown and due to concerns of food shortage. However, there is a chance of increase in food waste from the broken supply chains such as food items getting stuck on road due to restriction in vehicle movements, lack of workers in the warehouse for handling the food products, etc. The study also stresses the need for building localized resilient supply chains to counter such situations during future pandemics. While offering innovative solutions to existing waste management challenges, the study also suggests some key recommendations to the policymakers to help handle probable future pandemics if any holistically.}, - keywords = {Biomedical waste,COVID-19 waste,Food supply chain,Food waste,Plastic waste,Solid waste management}, - file = {/Users/fabio/Zotero/storage/EED3WD5J/full-text.pdf} -} - -@article{sharmaEnablersComputerVision2023, - title = {Enablers to Computer Vision Technology for Sustainable {{E-waste}} Management}, - author = {Sharma, Himanshu and Kumar, Harish and Mangla, Sachin Kumar}, - year = {2023}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {137396}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137396}, - urldate = {2023-05-11}, - abstract = {Computer vision technology has led to a robust and reliable e-waste management system by automating and streamlining waste processing. Computer vision technology offers various benefits leading to sustainable improvements in e-waste management practices. It is expected that the adoption of computer vision technology will revolutionize the way processing is carried out in e-waste management by minimizing human intervention, processing time, and cost requirements. India, an emerging economy, faces enormous challenges in efficiently managing and controlling the continuously growing amount of e-waste and its impact on the environment and society. Therefore, it is imperative to adopt computer vision technology to leverage its various benefits. In this study, we identify and analyse the complex interrelationships between the enablers of computer vision technology in e-waste management. From an extensive literature review, fifteen enablers are identified and verified by domain experts before using an integrated ``Interpretative Structural Modelling (ISM)" and ``Decision-Making Trial and Evaluating Laboratory (DEMATEL)" methodology to visualize the causal relationships. The study findings suggest sustainability as the most important criterion among the identified enablers for computer vision technology implementation in e-waste management. Other significant enablers are adaptability and reliability, cost reduction, quality control and safety management. The study's findings will help waste management practitioners to design appropriate strategies for implementing computer vision in e-waste management and creating effective and automated e-waste processes.}, - langid = {english}, - keywords = {Computer vision,DEMATEL,e-waste management,Environmental control,ISM}, - file = {/Users/fabio/Zotero/storage/WIV2ZUPZ/Sharma et al. - 2023 - Enablers to computer vision technology for sustain.pdf;/Users/fabio/Zotero/storage/Y77W75PD/S0959652623015548.html} -} - -@article{sharmaUtilizationWasteMaterial2022, - title = {The {{Utilization}} of {{Waste Material}} in {{Visual Arts}}: {{Relevance}} and {{Aesthetic Appeal}}}, - shorttitle = {The {{Utilization}} of {{Waste Material}} in {{Visual Arts}}}, - author = {Sharma, Swati and Mallik, Ranjan Kumar}, - year = {2022}, - month = apr, - journal = {ECS Transactions}, - volume = {107}, - number = {1}, - pages = {10199}, - publisher = {{IOP Publishing}}, - issn = {1938-5862}, - doi = {10.1149/10701.10199ecst}, - urldate = {2022-12-16}, - langid = {english} -} - -@techreport{Shen2009, - title = {Product Overview and Market Projection of Emerging Bio-Based Plastics}, - author = {Shen, Li and Haufe, Juliane and Patel, Martin K}, - year = {2009}, - number = {June}, - address = {{Utrecht, The Netherlands}}, - institution = {{Copernicus Institute for Sustainable Development and Innovation-Utrecht University.}}, - file = {/Users/fabio/Zotero/storage/E4RSJR3H/m-api-22f9c9e0-d69c-83d5-767f-3adbbf928e73.pdf} -} - -@article{Shen2019, - title = {Research on Large-Scale Additive Manufacturing Based on Multi-Robot Collaboration Technology}, - author = {Shen, Hongyao and Pan, Lingnan and Qian, Jun}, - year = {2019}, - month = dec, - journal = {Additive Manufacturing}, - volume = {30}, - pages = {100906}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100906} -} - -@article{Shen2020, - ids = {shen2020}, - title = {({{Micro}})Plastic Crisis: {{Un-ignorable}} Contribution to Global Greenhouse Gas Emissions and Climate Change}, - author = {Shen, Maocai and Huang, Wei and Chen, Ming and Song, Biao and Zeng, Guangming and Zhang, Yaxin}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {254}, - pages = {120138}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120138}, - keywords = {Carbon budget,Global climate change,Greenhouse gas emission,Micro)plastics,Plastic waste treatment}, - file = {/Users/fabio/Zotero/storage/FERJZM42/Shen et al. - 2020 - (Micro)plastic crisis Un-ignorable contribution t.pdf;/Users/fabio/Zotero/storage/VDV9RFXU/S0959652620301852.html} -} - -@article{Sherman2020, - title = {The {{Green Print}}: {{Advancement}} of {{Environmental Sustainability}} in {{Healthcare}}}, - author = {Sherman, Jodi D and Thiel, Cassandra and MacNeill, Andrea and Eckelman, Matthew J and Dubrow, Robert and Hopf, Harriet and Lagasse, Robert and Bialowitz, Joseph and Costello, Anthony and Forbes, McGain and Stancliffe, Rachel and Anastas, Paul and Anderko, Laura and Baratz, Mark and Barna, Stefi and Bhatnagar, Urvashi and Burnham, Jason and Cai, Yizhen and {Cassels-Brown}, Andy and Cimprich, Alexander FP and Cole, Heidi and {Coronado-Garcia}, Lorea and Duane, Brett and Grisotti, Gabriella and Hartwell, Arthy and Kumar, Varshini and Kurth, Ann and Leapman, Michael and Morris, Daniel S. and Overcash, Michael and Parvatker, Abhijeet G. and Pencheon, David and Pollard, Adam and Robaire, Bernard and Rockne, Karl and Sadler, Blair L. and Schenk, Beth and Sethi, Tushar and Sussman, L. Scott and Thompson, Jeff and Twomey, Janet M. and Vermund, Sten H and Vukelich, Daniel and Wasim, Natasha and Wilson, Debbie and Young, Steven B. and Zimmerman, Julie and Bilec, Melissa M.}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104882}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104882}, - urldate = {2020-08-09}, - abstract = {Healthcare is a major emitter of environmental pollutants that adversely affect health. Within the healthcare community, awareness of these effects is low, and recognition of the duty to address them is only beginning to gain traction. Healthcare sustainability science explores dimensions of resource consumption and environmental emissions associated with healthcare activities. This emerging field provides tools and metrics to quantify the unintended consequences of healthcare delivery and evaluate effective approaches that improve patient safety while protecting public health. This narrative review describes the scope of healthcare sustainability research, identifies knowledge gaps, introduces a framework for applications of existing research methods and tools to the healthcare context, and establishes research priorities to improve the environmental performance of healthcare services. The framework was developed through review of the current state of healthcare sustainability science and expert consensus by the Working Group for Environmental Sustainability in Clinical Care. Key recommendations include: development of a comprehensive life cycle inventory database for medical devices and drugs; application of standardized sustainability performance metrics at the clinician, hospital/health system, and national levels; revision of infection control standards driving non-evidence-based uptake of single-use disposable devices; call for increased federal research funding; and formation of a Global Commission on the Advancement of Environmental Sustainability in Healthcare. There is an urgent need for research that informs policy and practice to address the public health crisis arising from healthcare pollution. A transformational vision is required to align research priorities to achieve a sustainable healthcare system that advances quality, safety and value.}, - file = {/Users/fabio/Zotero/storage/XWQZVBPE/full-text.pdf} -} - -@article{shevchenkoProductlevelCircularityMetrics2022, - title = {Product-Level Circularity Metrics Based on the ``{{Closing}}\textendash{{Slowing Future}}\textendash{{Past}}'' Quadrant Model}, - author = {Shevchenko, Tetiana and Yannou, Bernard and Saidani, Michael and Cluzel, Fran{\c c}ois and Ranjbari, Meisam and Esfandabadi, Zahra Shams and Danko, Yuriy and Leroy, Yann}, - year = {2022}, - month = nov, - journal = {Sustainable Production and Consumption}, - volume = {34}, - pages = {395--411}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2022.09.024}, - urldate = {2022-10-16}, - abstract = {Critical literature review coupled with conceptual analysis provides a holistic framework for measuring a product's circularity performance based on its integrated contribution to the operationalization of various configurations of circular economy (CE) strategies. The following main results were obtained. First, we outline the ``\cyrchar\CYRS losing\textendash Slowing and Future\textendash Past'' (``CSFP'') quadrant model (``CSFP'' quadrant model) of CE-related product attributes and the circular product categories derived as findings of our previous study in the form of modifications to develop a product-level circularity metric. Second, we propose fifteen product circularity profiles with singular and configurative CE strategy-related contributions building on the ``\cyrchar\CYRS SFP'' model and circular product categories. Third, we quantify the 6Rs (reuse, repair, refurbishment, remanufacturing, repurposing, recycling) for the strategy-related contributions derived from the ``CSFP'' quadrant model to propose a product circularity data profile coupled with a metrical scale for measuring product circularity performance and visualizing quantified circular contributions. To trial, showcase and validate the relevance of the developed model and associated visualization tool, we conduct two case studies comparing the circularity performances of smartphones and packaging bags, respectively. Companies can use the proposed framework as a maturity scale to enhance the circularity performance of a product. This work contributes to a more accurate measurement of product circularity performance and a sharper understanding of its integrated contribution to circular strategies.}, - langid = {english}, - keywords = {Circular economy,Circular product categorization,Circularity indicator,Circularity metrics,Circularity performance,Product circularity}, - file = {/Users/fabio/Zotero/storage/S7ZMGD4I/Shevchenko et al_2022_Product-level circularity metrics based on the “Closing–Slowing Future–Past”.pdf;/Users/fabio/Zotero/storage/JD8L6BWD/S2352550922002640.html} -} - -@article{shevchenkoSmartEWasteSystem2021, - title = {Towards a {{Smart E-Waste System Utilizing Supply Chain Participants}} and {{Interactive Online Maps}}}, - author = {Shevchenko, Tetiana and Saidani, Michael and Danko, Yuriy and Golysheva, Ievgeniia and Chovancov{\'a}, Jana and Vavrek, Roman}, - year = {2021}, - month = feb, - journal = {Recycling}, - volume = {6}, - number = {1}, - pages = {8}, - publisher = {{MDPI AG}}, - issn = {2313-4321}, - doi = {10.3390/recycling6010008}, - urldate = {2021-02-14}, - abstract = {{$<$}p{$>$}Efficient electronic waste (e-waste) management is one of the vital strategies to save materials, including critical minerals and precious metals with limited global reserves. The e-waste collection issue has gained increasing attention in recent years, especially in developing countries, due to low collection rates. This study aims to search for progressive solutions in the e-waste collection sphere with close-to-zero transport and infrastructure costs and the minimization of consumers' efforts towards an enhanced e-waste management efficiency and collection rate. Along these lines, the present paper develops a smart reverse system of e-waste from end-of-life electronics holders to local recycling infrastructures based on intelligent information technology (IT) tools involving local delivery services to collect e-waste and connecting with interactive online maps of users' requests. This system considers the vehicles of local delivery services as potential mobile collection points that collect and deliver e-waste to a local recycling enterprise with a minimum deviation from the planned routes. Besides e-waste transport and infrastructure costs minimization, the proposed smart e-waste reverse system supports the reduction of CO2 through the optimal deployment of e-waste collection vehicles. The present study also advances a solid rationale for involving local e-waste operators as key stakeholders of the smart e-waste reverse system. Deploying the business model canvas (BMC) toolkit, a business model of the developed system has been built for the case of Sumy city, Ukraine, and discussed in light of recent studies.{$<$}/p{$>$}}, - keywords = {circular economy,end-of-life electronics equipment,recycling behavior,reverse logistics,route optimization,smart e-waste collection,waste management}, - file = {/Users/fabio/Zotero/storage/UT7NU55T/full-text.pdf} -} - -@article{Shi2017, - title = {Recyclable {{3D}} Printing of Vitrimer Epoxy}, - author = {Shi, Qian and Yu, Kai and Kuang, Xiao and Mu, Xiaoming and Dunn, Conner K. and Dunn, Martin L. and Wang, Tiejun and Jerry Qi, H.}, - year = {2017}, - journal = {Mater. Horiz.}, - volume = {4}, - number = {4}, - pages = {598--607}, - publisher = {{Royal Society of Chemistry}}, - issn = {2051-6347}, - doi = {10.1039/C7MH00043J}, - abstract = {3D printing of polymeric materials for various applications has been quickly developed in recent years. In contrast to thermoplastics, 3D printed thermosets, although desirable, are inherently non-recyclable due to their permanently crosslinked networks. As 3D printing is becoming more popular, it is desirable to develop recycling approaches for 3D printed parts in view of increasing polymer wastes. Here, we present a new thermosetting vitrimer epoxy ink and a 3D printing method that can 3D print epoxy into parts with complicated 3D geometries, which later can be recycled into a new ink for the next round of 3D printing. In the first printing cycle, a high-viscous ink is first slightly cured and is then printed at an elevated temperature into complicated 3D structures, followed by an oven cure using a two-step approach. To be recycled, the printed epoxy parts are fully dissolved in an ethylene glycol solvent in a sealed container at a high temperature. The dissolved polymer solution is reused for the next printing cycle using similar printing conditions. Our experiments demonstrate that the ink can be printed four times and still retains very good printability. In addition, the vitrimer epoxy can be used for pressure-free repairs for the 3D printed parts.}, - isbn = {2051-6347\textbackslash r2051-6355}, - file = {/Users/fabio/Zotero/storage/DJ2RJRZY/recyclable 3d printing of vitrimer epoxy.pdf} -} - -@article{Shi2018, - title = {Preparation and Selective Laser Sintering of a New Nylon Elastomer Powder}, - author = {Shi, Yunsong and Zhu, Wei and Yan, Chunze and Yang, Jinsong and Xia, Zhidao}, - year = {2018}, - month = aug, - journal = {Rapid Prototyping Journal}, - volume = {24}, - number = {6}, - pages = {1026--1033}, - issn = {1355-2546}, - doi = {10.1108/RPJ-11-2017-0223}, - file = {/Users/fabio/Zotero/storage/W9N7IHZ3/Preparation and selective laser sintering of a new nylon elastomer powder.pdf} -} - -@article{Shi2020, - title = {Bi-Objective Design of Household {{E-waste}} Collection with Public Advertising and Competition from Informal Sectors}, - author = {Shi, Jianmai and Wang, Rui and Chen, Wenyi and Xing, Lining and Jin, Mingzhou}, - year = {2020}, - month = feb, - journal = {Waste Management}, - volume = {102}, - pages = {65--75}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.10.018} -} - -@article{Shi2020a, - title = {Using Life Cycle Assessment to Determine If High Utilization Is the Dominant Force for Sustainable Polymer Additive Manufacturing}, - author = {Shi, Yuan and Faludi, Jeremy}, - year = {2020}, - month = may, - journal = {Additive Manufacturing}, - volume = {35}, - pages = {101307}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101307}, - urldate = {2020-05-25}, - abstract = {Previous studies on the environmental impacts of polymeric additive manufacturing (AM) have shown that higher printer utilization dramatically improves impacts per part\textemdash so much so that it might dominate all other interventions if taken to an extreme. High utilization can be both temporal (printing constantly) and spatial (printing many parts at once). In this study, life cycle assessments (LCAs) were performed for an inkjet fusion printer with exceptionally high spatial utilization capacity and were compared to previous LCAs of nine printers printing with eight materials. Comparisons were performed in different utilizations, both temporal and spatial, to determine if high utilization reduces the environmental impact of AM more than other interventions, such as using sustainable print materials. For the inkjet fusion printer, maximum utilization dramatically reduced the environmental impact per part to less than 1\% of its impact in lowest utilization; this was below the impacts of other printers in low utilizations. However, when compared in the same utilization scenarios, the inkjet fusion printer still caused a higher environmental impact per part than almost all printers, primarily due to high energy use. The lowest-impact printer used both high spatial utilization and low-impact materials that also enabled a low-energy printing process. Therefore, printer utilization is not the overriding factor and must be combined with energy efficiency and material choice.}, - keywords = {Energy efficiency,Environmental impacts,Green 3D printing,Life cycle assessment,Sustainable additive manufacturing} -} - -@article{shigueokaExpandingManufacturingStrategies2020, - title = {Expanding Manufacturing Strategies to Advance in Porous Media Planning with Material Extrusion Additive Manufacturing}, - author = {Shigueoka, Marcelo Okada and Volpato, Neri}, - year = {2020}, - month = dec, - journal = {Additive Manufacturing}, - pages = {101760}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101760}, - urldate = {2020-12-21} -} - -@article{Shih2019, - title = {Recycling Fund Management for a Cleaner Environment through Differentiated Subsidy Rates}, - author = {Shih, Hsu-Shih and Cheng, Chi-Bin and Chen, Hung-Yi}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {240}, - pages = {118146}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118146} -} - -@article{Shim2018, - title = {Rival Precedence and Open Platform Adoption: {{An}} Empirical Analysis}, - author = {Shim, Seonyoung and Lee, Byungtae and Kim, Sojung Lucia}, - year = {2018}, - month = feb, - journal = {International Journal of Information Management}, - volume = {38}, - number = {1}, - pages = {217--231}, - publisher = {{Elsevier Ltd}}, - issn = {02684012}, - doi = {10.1016/j.ijinfomgt.2017.10.001}, - abstract = {Herding in open platform adoption decisions appears to prevail even when the systems adopted represent high risks with enterprise-wide impact. We present a model of organizational open platform adoption that integrates six different theoretical mechanisms based on a technology-organization-environment framework that drives herding: network effect benefits, new platform benefits, new platform risk, organizational learning, mimetic pressures, and competitive pressures. To find which mechanisms work significantly in organizational IT decision-making in accordance with IT diffusion and rival precedence, we empirically test the model by splitting the samples according to the proportion of rivals that have already adopted innovations. The empirical results demonstrate that among the six herding mechanisms, new platform risk and organizational learning drives herding in the earlier stage of diffusion and new platform benefits and competitive pressure drives herding in the later stage of diffusion. The results imply that organizations react conservatively to new platforms when they perceive less platform diffusion. However, as diffusion increases, organizations react more strategically to maintain competitive parity with rivals by imitating rival decisions.}, - keywords = {Competitive pressure,IT platform adoption,IT platform decision,Mimetic pressure,Network effect,Organizational learning,Rival precedence} -} - -@article{shiRoleExpectationInnovation2022, - title = {The Role of Expectation in Innovation Evolution: {{Exploring}} Hype Cycles}, - author = {Shi, Yuwei and Herniman, John}, - year = {2022}, - month = jan, - journal = {Technovation}, - pages = {102459}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2022.102459}, - urldate = {2022-02-09} -} - -@article{shiSourcesinkProcessMicroplastics2022, - title = {Source-Sink Process of Microplastics in Watershed-Estuary-Offshore System}, - author = {Shi, Honghua and Yu, Deliang and Yin, Liting and Sui, Yadong and Liu, Yongzhi and Qiao, Shuqing and Wang, Weimin and Zheng, Wei and Ding, Dewen}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {338}, - pages = {130612}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130612}, - urldate = {2022-01-25} -} - -@article{shittuWEEEChallengeReuse2021, - title = {The `{{WEEE}}' Challenge: {{Is}} Reuse the ``New Recycling''?}, - author = {Shittu, O.S. and Williams, I.D. and Shaw, P.J.}, - year = {2021}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {174}, - pages = {105817}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105817}, - urldate = {2021-08-23} -} - -@article{Shonnard2019, - title = {Systems {{Analysis}} for {{PET}} and {{Olefin Polymers}} in a {{Circular Economy}}}, - author = {Shonnard, David and Tipaldo, Emily and Thompson, Vicki and Pearce, Joshua and Caneba, Gerard and Handler, Robert}, - year = {2019}, - journal = {Procedia CIRP}, - volume = {80}, - pages = {602--606}, - issn = {22128271}, - doi = {10.1016/j.procir.2019.01.072} -} - -@inproceedings{Shor2005, - title = {Precision Extruding Deposition of Composite Polycaprolactone/ Hydroxyapatite Scaffolds for Bone Tissue Engineering}, - booktitle = {Proceedings of the {{IEEE}} 31st {{Annual Northeast Bioengineering Conference}}, 2005.}, - author = {Shor, L and Darling, A and Starly, B and Sun, W and Guceri, S.}, - year = {2005}, - pages = {172--173}, - publisher = {{IEEE}}, - doi = {10.1109/NEBC.2005.1431978}, - urldate = {2014-07-07}, - isbn = {0-7803-9105-5}, - file = {/Users/fabio/Zotero/storage/5WTTB8QM/Shor et al. - 2005 - Precision extruding deposition of composite polycaprolactone hydroxyapatite scaffolds for bone tissue engineering.pdf} -} - -@article{shoukohyarUncoveringDarkBright2020, - title = {Uncovering the Dark and Bright Sides of Implementing Collaborative Forecasting throughout Sustainable Supply Chains: {{An}} Exploratory Approach}, - author = {Shoukohyar, Sajjad and Seddigh, Mohammad Reza}, - year = {2020}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {158}, - pages = {120059}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120059}, - urldate = {2020-06-11} -} - -@article{shrutiStrengtheningCitizenScience2022, - title = {Strengthening Citizen Science Partnerships with Frontline Sanitation Personnel to Study and Tackle Plastic Pollution}, - author = {Shruti, V. C. and {P{\'e}rez-Guevara}, Ferm{\'i}n and Roy, Priyadarsi D. and {Kutralam-Muniasamy}, Gurusamy}, - year = {2022}, - month = nov, - journal = {Environmental Science \& Policy}, - volume = {137}, - pages = {70--74}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.08.011}, - urldate = {2022-09-18}, - abstract = {The COVID-19 outbreak has boosted demand for and use of personal protective equipment (PPE) and other single-use plastics, adding to the environment's already high levels of plastic pollution and endangering biota. Estimating the relative abundance of PPE wastes that end up in the environment is crucial and has remained a challenge for COVID-19 researchers. Citizen science has been utilized in recent studies to monitor and collect data using volunteers, and it has proven to be a valuable approach even in difficult situations. The expansion of citizen scientific participation groups is important in light of the growing anthropogenic impacts of plastic pollution. To date, frontline sanitary personnel are often overlooked and underutilized in a citizen science perspective, yet they serve critical roles in maintaining cleanliness in key environmental settings (e.g., beaches and streets) both during and beyond the pandemic. This paper explores and emphasizes the advantages and need of including frontline sanitary personnel into citizen science for the benefit of both researchers and communities, as well as to encourage long-term goals in global plastic litter monitoring, thereby exemplifying citizen science opportunities. Recommendations are made to design in order to improve the future status of citizen science development.}, - langid = {english}, - keywords = {COVID-19,Government,Litter,Marine,Single use plastics,Survey}, - file = {/Users/fabio/Zotero/storage/KLU8E2LX/Shruti et al_2022_Strengthening citizen science partnerships with frontline sanitation personnel.pdf;/Users/fabio/Zotero/storage/U6NGNFJT/S1462901122002519.html} -} - -@article{shuaiInteractionEcosystemServices2021, - title = {Interaction between Ecosystem Services and Rural Poverty Reduction: {{Evidence}} from {{China}}}, - author = {Shuai, Jing and Liu, Jing and Cheng, Jinhua and Cheng, Xin and Wang, Jing}, - year = {2021}, - month = may, - journal = {Environmental Science \& Policy}, - volume = {119}, - pages = {1--11}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.01.011}, - urldate = {2021-02-14} -} - -@article{shuklaJournalPreproofFourstage2021, - title = {Journal {{Pre-proof}} "{{A}} Four-Stage Maturity Model of Green Manufacturing Orientation with an Illustrative Case Study" "{{A}} Four-Stage Maturity Model of Green Manufacturing Orientation with an Illustrative Case Study" "{{A}} Four-Stage Maturity Model of Green Manufacturing Orientation with an Illustrative Case Study"}, - author = {Shukla, Ganesh Prasad and Adil, Gajendra Kumar and Kumar, Gajendra and Shailesh, Adil and Mehta, J}, - year = {2021}, - doi = {10.1016/j.spc.2021.01.009}, - urldate = {2021-01-12}, - abstract = {Maturity models describe a process or an activity's characteristics at different stages, which generally evolve from an initial stage to a more advanced stage. Notably, most maturity models in green manufacturing (GM) do not clearly define and characterize the maturity stages, and are also not empirically validated. Therefore, this study considers four discrete maturity stages of GM, viz., I. compliance driven; II. eco-opportunist; III. green innovator and IV. green manufacturing evangelist, based on drivers for proactiveness towards greenness. It defines a construct "green manufacturing orientation" and develops a maturity stage model for green manufacturing orientation following a two-stage methodology. In the first stage, a conceptual model is developed by analyzing extant literature which fills an important research gap in literature. In the second stage, a case study is used to illustrate the application of this proposed conceptual model through eight key green initiatives that have been carried out. It was observed that the case firm, over a period of time moved to a higher level of GM maturity. Moreover, there was also a progressive trend in the firm's GM orientation. However, a uniform enhancement of GM orientation was not witnessed in the case.}, - keywords = {Case study,{Green manufacturing maturity stages, Green initiatives},Green manufacturing orientation}, - file = {/Users/fabio/Zotero/storage/L9KL787I/full-text.pdf} -} - -@article{shullaContributionRegionalCenters2019, - title = {The Contribution of {{Regional Centers}} of {{Expertise}} for the Implementation of the 2030 {{Agenda}} for {{Sustainable Development}}}, - author = {Shulla, Kalterina and Leal Filho, Walter and Lardjane, S. and Sommer, Jan Henning and Salvia, Amanda Lange and Borgemeister, Christian}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117809}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117809}, - urldate = {2020-06-18}, - abstract = {The implementation of the 2030 Agenda for Sustainable Development and the achievement of the 17 Sustainable Development Goals requires a fully integrated approach between sectors, disciplines, countries, and actors. On the fourth year of its implementation, the uptake of SDGs from non-state actors is increasing around the world, by developing engaging mechanisms for involvement at horizontal and vertical level. Considering that activation of existing partnerships is important for SDGs, in conjunction with creating new ones, this research has analysed the approach of global network of Regional Centers of Expertise on Education for Sustainable Development. An overview of involvement is done based on a survey data, by exploring collaboration in local, national and international scale. Through Hierarchical Classification Analysis, the networks are grouped into clusters with similar characteristics and discussions include challenges and potentialities for intensifying the contribution towards the 2030 Agenda.}, - keywords = {Education,Networks,Partnerships,Sustainable Development Goals} -} - -@article{siacorAdditiveManufacturing3D2021, - title = {On the Additive Manufacturing ({{3D}} Printing) of Viscoelastic Materials and Flow Behavior: {{From}} Composites to Food Manufacturing}, - author = {Siacor, Francis Dave C. and Chen, Qiyi and Zhao, Jia Yu and Han, Lu and Valino, Arnaldo D. and Taboada, Evelyn B. and Caldona, Eugene B. and Advincula, Rigoberto C.}, - year = {2021}, - month = sep, - journal = {Additive Manufacturing}, - volume = {45}, - pages = {102043}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102043}, - urldate = {2021-06-10} -} - -@article{Siampou2014, - title = {Online versus Face-to-Face Collaboration in the Context of a Computer-Supported Modeling Task}, - author = {Siampou, F. and Komis, V. and Tselios, N.}, - year = {2014}, - journal = {Computers in Human Behavior}, - volume = {37}, - pages = {369--376}, - publisher = {{Elsevier Ltd}}, - issn = {07475632}, - doi = {10.1016/j.chb.2014.04.032}, - abstract = {This paper examines the differences between online synchronous and offline face-to-face collaboration in the context of a computer-supported modeling task. A mathematical problem was designed and set to the participants to solve. Their modeling process using ModellingSpace, a collaborative computer-supported educational environment, was monitored. 16 ninth grade students participated in the study, all worked in groups of two. Eight groups worked online, the remaining 8 offline. The analysis focused on the identification of students' cognitive modeling strategies, their interactions and the learning gain for each type of collaboration. Both qualitative and quantitative approaches were adopted as well as two complementary coding schemes to better investigate the peers' interactions. The results obtained suggest that pairs who worked online emphasized analysis and synthesis; they also demonstrated a higher learning gain. Offline pairs needed the teacher's support and demonstrated stronger social interaction. Moreover, although the actions of offline dyads were more numerous, the dyads that worked online seemed to present more task-oriented actions. Participants in both groups mutually explored the problem, with few disagreements among them. Our findings could inform the design of learning programs and the facilitation of collaborative tasks.}, - isbn = {0747-5632}, - keywords = {face-to-face and online collaboration} -} - -@article{Siddaway2019, - title = {How to {{Do}} a {{Systematic Review}}: {{A Best Practice Guide}} for {{Conducting}} and {{Reporting Narrative Reviews}}, {{Meta-Analyses}}, and {{Meta-Syntheses}}}, - author = {Siddaway, Andy P. and Wood, Alex M. and Hedges, Larry V.}, - year = {2019}, - month = jan, - journal = {Annual Review of Psychology}, - volume = {70}, - number = {1}, - pages = {747--770}, - issn = {0066-4308}, - doi = {10.1146/annurev-psych-010418-102803}, - abstract = {Systematic reviews are characterized by a methodical and replicable methodology and presentation. They involve a comprehensive search to locate all relevant published and unpublished work on a subject; a systematic integration of search results; and a critique of the extent, nature, and quality of evidence in relation to a particular research question. The best reviews synthesize studies to draw broad theoretical conclusions about what a literature means, linking theory to evidence and evidence to theory. This guide describes how to plan, conduct, organize, and present a systematic review of quantitative (meta-analysis) or qualitative (narrative review, meta-synthesis) information. We outline core standards and principles and describe commonly encountered problems. Although this guide targets psychological scientists, its high level of abstraction makes it potentially relevant to any subject area or discipline. We argue that systematic reviews are a key methodology for clarifying whether and how research findings replicate and for explaining possible inconsistencies, and we call for researchers to conduct systematic reviews to help elucidate whether there is a replication crisis.}, - file = {/Users/fabio/Zotero/storage/FPYSEVP2/How to Do a Systematic Review A Best Practice Guide for Conducting and Reporting Narrative Reviews, Meta-Analyses, and Meta-Syntheses.pdf} -} - -@article{siddiqueDiscerningCircularityPlastic2022, - title = {Discerning the Circularity of the Plastic Industry in {{Bangladesh}} through the Lens of Material Flow Analysis}, - author = {Siddique, Shaiyan and Roy, Bidhan Bhuson and Zaman, Sabrina and Khan, Ayushi and Al Alam, Md. Asef and Chowdhury, Rubel Biswas and Farhana, Biswas Karabi and Hossain, Mohammad Mosharraf and Murakami, Shinsuke and Sujauddin, Mohammad}, - year = {2022}, - month = aug, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2022.08.001}, - urldate = {2022-08-11}, - abstract = {This study performs the first national plastic material flow analysis (MFA) of Bangladesh to obtain essential information for developing roadmap for circular economy. It quantified plastic flows for the fiscal year (FY) 2019\textendash 2020 by circumventing data deficiencies through innovative methodical approach and an improvised coupling of primary data from extensive field surveys and historical foreign trade statistics. In FY2019\textendash 2020, Bangladesh exported only 22\,\% of its total annual plastic import of 1,710,296\,metric\,tons. The packaging sector consumed the highest 937,242\,metric\,tons (48\,\% of the domestic consumption). Per capita consumption and waste generation were 10.13\,kg and 7.9\,kg, respectively, leading to plastic use intensity of 7.94\,g per 2010US\$ GDP in FY2019\textendash 2020, indicating an active materialization phase and growth. Bangladesh recycled 362,332\,metric\,tons of plastic a year, 90\,\% of which was done by the country's robust informal sector, leading to a better recycling efficiency (28\,\%) compared to developed countries. Bangladesh also fared better in plastic decoupling, with a decoupling factor of 21 compared to the average of 13 for its developed counterparts. Scenario-based forecast indicated a maximum of nearly 6 million\,metric\,tons of potential imports in FY2029\textendash 2030 for the business-as-usual scenario. The plastic industry exhibited better performance than many countries despite poor institutional capacity and lack of policy support by leveraging the informal and semi-formal sectors. Policy insights particularly on improving waste management by the informal sector, community awareness and stakeholder engagement, improving manufacturing processes and technologies may significantly contribute to circularizing plastic use in Bangladesh to achieve SDG12 targets.}, - langid = {english}, - keywords = {Informal sector,Material flow analysis,Plastic circularity,Recycling efficiency,Resource decoupling,Sectoral plastic flow}, - file = {/Users/fabio/Zotero/storage/TYA4CPKW/S235255092200207X.html} -} - -@article{sideriusReconsideringCircularEconomy2021, - title = {Reconsidering {{The Circular Economy Rebound Effect}}: {{Propositions}} from a Case Study of the {{Dutch Circular Textile Valley}}}, - author = {Siderius, Thomas and Poldner, Kim}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {293}, - pages = {125996}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.125996}, - urldate = {2021-02-14}, - file = {/Users/fabio/Zotero/storage/9G3C7CGF/full-text.pdf} -} - -@article{Siegel2019, - title = {Automated Non-Destructive Inspection of {{Fused Filament Fabrication}} Components Using {{Thermographic Signal Reconstruction}}}, - author = {Siegel, Joshua E. and Beemer, Maria F. and Shepard, Steven M.}, - year = {2019}, - month = nov, - journal = {Additive Manufacturing}, - pages = {100923}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100923} -} - -@misc{Siegle2015, - title = {Neural Ensemble Communities: {{Open-source}} Approaches to Hardware for Large-Scale Electrophysiology}, - author = {Siegle, Joshua H. and Hale, Gregory J. and Newman, Jonathan P. and Voigts, Jakob}, - year = {2015}, - month = jun, - journal = {Curr. Opin. Neurobiol.}, - volume = {32}, - pages = {53--59}, - publisher = {{Elsevier Ltd}}, - issn = {18736882}, - doi = {10.1016/j.conb.2014.11.004}, - abstract = {One often-overlooked factor when selecting a platform for large-scale electrophysiology is whether or not a particular data acquisition system is 'open' or 'closed': that is, whether or not the system's schematics and source code are available to end users. Open systems have a reputation for being difficult to acquire, poorly documented, and hard to maintain. With the arrival of more powerful and compact integrated circuits, rapid prototyping services, and web-based tools for collaborative development, these stereotypes must be reconsidered. We discuss some of the reasons why multichannel extracellular electrophysiology could benefit from open-source approaches and describe examples of successful community-driven tool development within this field. In order to promote the adoption of open-source hardware and to reduce the need for redundant development efforts, we advocate a move toward standardized interfaces that connect each element of the data processing pipeline. This will give researchers the flexibility to modify their tools when necessary, while allowing them to continue to benefit from the high-quality products and expertise provided by commercial vendors.} -} - -@article{Sigloch2020, - title = {{{3D Printing}} - {{Evaluating Particle Emissions}} of a {{3D Printing Pen}}}, - author = {Sigloch, Heike and Bierkandt, Frank S. and Singh, Ajay V. and Gadicherla, Ashish K. and Laux, Peter and Luch, Andreas}, - year = {2020}, - month = oct, - journal = {Journal of Visualized Experiments}, - number = {164}, - issn = {1940-087X}, - doi = {10.3791/61829} -} - -@article{Signoret2019, - title = {{{MIR}} Spectral Characterization of Plastic to Enable Discrimination in an Industrial Recycling Context: {{I}}. {{Specific}} Case of Styrenic Polymers}, - author = {Signoret, Charles and {Caro-Bretelle}, Anne-Sophie and {Lopez-Cuesta}, Jos{\'e}-Marie and Ienny, Patrick and Perrin, Didier}, - year = {2019}, - month = jul, - journal = {Waste Management}, - volume = {95}, - pages = {513--525}, - publisher = {{Elsevier Ltd}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.05.050}, - abstract = {One of the major limitations in polymer recycling is their sorting as they are collected in mixes. The majority of polymers are highly incompatible without compatibilizers. For sorting of polymers, high-speed online Near-Infrared (NIR) spectroscopy is nowadays relatively widespread. It is however limited by the use of carbon black as a pigment and UV-stabilizer, which strongly absorbs near-infrared signals. Mid-Infrared (MIR) hyperspectral cameras were recently put on the market. However, their wavelength ranges are smaller and their resolutions are poorer, in comparison with laboratory equipment based on Fourier-Transform Infrared (FTIR). The identification of specific signals of end-of-life polymers for recycling purposes is becoming an important stake since they are very diverse, highly formulated, and more and more used in copolymers and blends, leading to complex waste stocks mainly as WEEE (Waste Electrical and Electronic Equipment). Dark colored plastics are the major part of WEEE, which also contains mainly styrenics (ABS, HIPS and their blends). In addition, styrenics are especially concerned by the need of identification. In this framework, spectral characterizations of ten types of polymers were scrutinized through about eighty pristine and real waste samples. Polymer characteristic signals were aggregated in charts to help rapid and automatized distinction through specific signals, even in limited resolution and frequency ranges.}, - keywords = {Identification,MIR,Polymer recycling,Sorting,Styrenics,WEEE}, - file = {/Users/fabio/Zotero/storage/85TZLXJP/MIR spectral characterization of plastic to enable discrimination in an industrial recycling context- II. Specific case of polyolefins.pdf} -} - -@article{Signoret2020, - title = {{{MIR}} Spectral Characterization of Plastic to Enable Discrimination in an Industrial Recycling Context: {{II}}. {{Specific}} Case of Polyolefins}, - author = {Signoret, Charles and {Caro-Bretelle}, Anne Sophie and {Lopez-Cuesta}, Jos{\'e} Marie and Ienny, Patrick and Perrin, Didier}, - year = {2019}, - month = may, - journal = {Waste Management}, - volume = {98}, - pages = {160--172}, - publisher = {{Pergamon}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2019.08.010}, - urldate = {2020-05-08}, - abstract = {Sorting at industrial scale is required to perform mechanical recycling of plastics in order to obtain properties that could be competitive with virgin polymers. As a matter of fact, the most part of the various types of plastic waste are not miscible and even compatible. Mid-Infrared (MIR) HyperSpectral Imagery (HSI) is viewed as one of the solutions to the problem of black plastic sorting. Many Waste of Electrical and Electronic Equipment (WEEE) plastics are black. Nowadays, these materials are difficult to sort at an industrial scale because the main used pigment to produce this color, carbon black, masks the Near-Infrared (NIR) spectra of polymers, the currently most used technology for acute sorting in industrial conditions. In this study, laboratory Fourier-Transform Infrared (FTIR) in Attenuated Total Reflection mode (ATR) has been used as a theoretical toolbox based on physical chemistry to help building an automated HSI discrimination despite its limited conditions, especially shorter wavelengths ranges. Weaker resolution and very short acquisition times are other HSI limitations. Helping fast and exhaustive laboratory characterizations of polymeric waste stocks is the other goal of this study. This study focusses on polyolefins as they represent the second biggest fraction of WEEE plastics (WEEP) after styrenics and since little quantities mixed to styrenics during mechanical recycling can lead to important decrease in mechanical properties. Twelve references were thus evaluated and compared between each other and with real waste samples to highlight spectral elements, which can enable differentiation. Charts compiling the signals of discussed polymers were built aiming to the same objective.}, - pmid = {31450178}, - keywords = {Identification,MIR,Polymer recycling,Polyolefins,Sorting,WEEE} -} - -@article{signoretAlterationsPlasticsSpectra2020, - title = {Alterations of Plastics Spectra in {{MIR}} and the Potential Impacts on Identification towards Recycling}, - author = {Signoret, Charles and {Caro-Bretelle}, Anne-Sophie and {Lopez-Cuesta}, Jos{\'e}-Marie and Ienny, Patrick and Perrin, Didier}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104980}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104980}, - urldate = {2020-06-22} -} - -@inproceedings{Sikhwal2017, - title = {Product Design for Mass Individualisation for Industrial Application}, - booktitle = {2017 {{IEEE}} Int. {{Conf}}. {{Ind}}. {{Eng}}. {{Eng}}. {{Manag}}.}, - author = {Sikhwal, R. K. and Childs, P. R. N.}, - year = {2017}, - month = dec, - pages = {674--680}, - publisher = {{IEEE}}, - doi = {10.1109/IEEM.2017.8289976}, - isbn = {978-1-5386-0948-4}, - file = {/Users/fabio/Zotero/storage/4JLVRN8I/Sikhwal_Childs_2017_Product design for mass individualisation for industrial application.pdf} -} - -@inproceedings{Sikhwal2019, - title = {Identification of Optimised Open Platform Architecture Products for Design for Mass Individualisation}, - booktitle = {Smart Innov. {{Syst}}. {{Technol}}.}, - author = {Sikhwal, Ravi K. and Childs, Peter R.N.}, - year = {2019}, - volume = {135}, - pages = {861--874}, - publisher = {{Springer Science and Business Media Deutschland GmbH}}, - issn = {21903026}, - doi = {10.1007/978-981-13-5977-4_72}, - abstract = {Mass Individualisation is a new product design paradigm that comprises an open-hardware platform and multiple independent modules for end-user's selection that are integrated with the platform. Open platform architecture products (OPAP) are the key enablers for this paradigm. Based on explorative literature analysis, with practical insights from an industrial questionnaire survey, an Innovation toolkit for the end-user has been developed. This provides a means for selecting an optimal OPAP. The design of the Innovation toolkit has been approached in four different steps: modelling of OPAP Products; modelling of evaluation measures and evaluation indices with end-user preferences; identification of the optimal module options for every configuration and Configuration optimisation. Two case studies have been presented to demonstrate the effectiveness and to illustrate that the Innovation toolkit can readily be applied to these types of product development to obtain highly individualised and optimised OPAP.}, - isbn = {9789811359767}, - keywords = {Design optimisation,Innovation toolkit,Mass individualisation,Open platform architecture products} -} - -@article{sileryteResponsibilityWasteProduction2022, - title = {The Responsibility of Waste Production: {{Comparison}} of {{European}} Waste Statistics Regulation and {{Dutch National Waste Registry}}}, - shorttitle = {The Responsibility of Waste Production}, - author = {Sileryte, Rusne and Wandl, Alexander and {van Timmeren}, Arjan}, - year = {2022}, - month = sep, - journal = {Waste Management}, - volume = {151}, - pages = {171--180}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.07.022}, - urldate = {2022-08-10}, - abstract = {The announcement of a new Circular Economy Action Plan as part of the European Green Deal policy has created an urgent need for the reliable information on resource flows to monitor and support the transition. An updated Monitoring Framework is set to rely as much as possible on European Statistics, however at this point there are no changes introduced in supranational statistics regulations. This raises a question whether regulations that have been created before the paradigm shift are still able to supply us with statistics necessary to inform policy makers about current successful practices, remaining barriers, positive and negative impacts of the transition and overall progress towards the set goals. This paper focuses on the Waste Statistics Regulation, specifically the relationship between the types of waste and economic activities which are considered to be the waste producers. Dutch National Waste Registry is used as a case study to compare the guidelines on pan-European waste data collection to the actual waste reports. The task of this publication is to explore to which extent the guidelines available in the Waste Statistics Regulation correspond to the operational reality. To do so it presents a computational method to link waste producers to their economic activities using a national Trade Registry. An extensive discussion of the results provides insights and recommendations for the future guidelines of waste statistics to support circular economy transition.}, - langid = {english}, - keywords = {Circular economy,Waste producers,Waste statistics,Waste statistics regulation}, - file = {/Users/fabio/Zotero/storage/YHQ6LXCA/Sileryte et al_2022_The responsibility of waste production.pdf;/Users/fabio/Zotero/storage/MFEE46D8/S0956053X22003683.html} -} - -@article{Siltaloppi2021, - title = {Toward a Sustainable Plastics Value Chain: {{Core}} Conundrums and Emerging Solution Mechanisms for a Systemic Transition}, - author = {Siltaloppi, Jaakko and J{\"a}hi, Markus}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {315}, - pages = {128113}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.128113}, - urldate = {2021-07-06}, - file = {/Users/fabio/Zotero/storage/P6ZW8R8I/full-text.pdf} -} - -@article{Silva2017, - title = {A {{Hybrid Processing Approach}} to the {{Manufacturing}} of {{Polyamide Reinforced Parts}} with {{Carbon Fibers}}}, - author = {Silva, M. and Pereira, A. M. and Alves, N. and Mateus, A. and Mal{\c c}a, C.}, - year = {2017}, - journal = {Procedia Manufacturing}, - volume = {12}, - number = {December 2016}, - pages = {195--202}, - publisher = {{The Author(s)}}, - issn = {23519789}, - doi = {10.1016/j.promfg.2017.08.024}, - abstract = {The use of thermoplastic composites reinforced with long or continuous fibers underwent an amazing increase due to advantages such as good mechanical performance, high temperature resistance, recyclable and chemical stability when compared with simple thermosetting matrices. These advantages allowed for the replacement of thermosetting systems by composites that led to the discovery of new applications. However, the processing procedure of thermoplastics reinforced with prepregs yarns entails some technological and scientific challenges mainly due to its high viscosity that results in difficulty and complexity in impregnating the reinforcements. Concerning engineering components market requirements, the polyamide thermoplastic matrices reinforced with carbon fibers have a huge demand due to the versatility of the applications where they can be used. This work presents, therefore, the development of a low-cost device that combines the Fused Filament Fabrication (FFF) additive manufacturing technique together with the processing and consolidation of thermoplastic prepregs yarns for manufacturing parts made of polyamide reinforced with carbon fibers without need of post-processing operations. To evaluate the mechanical properties of the polyamide reinforced with carbon fibers, samples were manufactured and three point bending and tensile tests were done. From results it was demonstrated the very high structural strength to both bending and tensile loads of tested material.}, - isbn = {0000000000}, - keywords = {Carbon fibers,Fused Filament Fabrication,Reinforced polyamide composites,Thermoplastic prepregs yarns} -} - -@article{silvadesouzalimacanoTypologyMunicipalSolid2022, - title = {Typology of Municipal Solid Waste Recycling Value Chains: {{A}} Global Perspective}, - author = {{Silva de Souza Lima Cano}, Nathalia and Iacovidou, Eleni and Rutkowski, Em{\'i}lia Wanda}, - year = {2022}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {336}, - pages = {130386}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130386}, - urldate = {2022-01-25} -} - -@article{silvaOnboardPort3D2023, - title = {On-Board and Port {{3D}} Printing to Promote a Maritime Plastic Circular Economy}, - author = {Silva, Diego and Garrido, Julio and Lekube, Blanca and Arrillaga, Alex}, - year = {2023}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {407}, - pages = {137151}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137151}, - urldate = {2023-05-01}, - abstract = {Oceanic plastic pollution has become one of the most serious problems in terms of the environment, and Circular Economy (CE) strategies are being implemented to reduce it. The article presents the results of a diagnosis of plastic waste in the maritime sector and the use of 3D printing as an enabling technology of CE around plastic. Maritime industries were asked about their plastic waste generation and potential parts and components which could be replaced by equivalent parts made by 3D printing. To close the CE loop, these parts would be printed with filament from the maritime industries' plastic waste. The article addresses this process of generating filament that enables the CE and how this printing process can be affected and corrected under on-board conditions. A polypropylene-based strapping tape waste was chosen to produce recycled filament. This filament resulted stiffer than the commercial filament and, through an additivation process, it achieved better flexural properties. Finally, the 3D printing process during on-board unstable conditions was improved by an automatic and electronic correction on the 3D printer machine itself.}, - langid = {english}, - keywords = {3D printing,Circular economy,Maritime industries,Ocean plastic waste,On-board printing,Recycling}, - file = {/Users/fabio/Zotero/storage/QRY38A7Q/Silva et al_2023_On-board and port 3D printing to promote a maritime plastic circular economy.pdf;/Users/fabio/Zotero/storage/67IR428R/S0959652623013094.html} -} - -@article{silvaReplacingPlasticCorrugated2023, - title = {Replacing Plastic with Corrugated Cardboard: {{A}} Carbon Footprint Analysis of Disposable Packaging in a {{B2B}} Global Supply Chain\textemdash{{A}} Case Study}, - shorttitle = {Replacing Plastic with Corrugated Cardboard}, - author = {Silva, Nathalie and {Molina-Besch}, Katrin}, - year = {2023}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {191}, - pages = {106871}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.106871}, - urldate = {2023-02-12}, - abstract = {Industry is increasingly committed to reduce its ecological footprint. One specific area of increased industrial interest is the use of plastic-free packaging. Plastic packaging is efficient from a supply chain perspective, but as waste risks causing disastrous environmental effects. This case study assesses the environmental impacts (from cradle to grave) of plastic cushioning inserts vs. corrugated cardboard cushioning inserts. The cushioning options have different measurements requiring different box sizes. The carbon footprint calculation covers the main phases of the packaging life cycle: manufacturing, transport and end-of-life processes. Calculation results show that the corrugated cardboard option has the highest carbon footprint, due to weight increase along with long transport distances and high dependence on airfreight. The results reinforce the importance of developing alternatives to plastic packaging without increasing packaging weight. Managerial implications and suggestions for policymakers are presented and discussed.}, - langid = {english}, - keywords = {Carbon footprint,Cardboard,Case study,LCA,Packaging,Plastic}, - file = {/Users/fabio/Zotero/storage/CL7AHEMM/Silva_Molina-Besch_2023_Replacing plastic with corrugated cardboard.pdf;/Users/fabio/Zotero/storage/T4GF7CXF/S0921344923000083.html} -} - -@inproceedings{Silver2017, - title = {Plastic Packaging Recycling Using Intelligent Separation Technologies for Materials ({{PRISM}}): {{The}} Use of Long-Persistence Phosphors}, - booktitle = {Proceedings of the {{International Display Workshops}}}, - author = {Silver, Jack and Fern, George R. and Harris, Paul G. and Marsh, Paul and Tarverdi, Karnik}, - year = {2017}, - volume = {2}, - pages = {1295--1298}, - publisher = {{Society of Plastics Engineers}}, - issn = {18832490}, - urldate = {2020-04-08}, - abstract = {A new approach overcoming problems of interfering fluorescence (from plastic bottles and their labels) in the automated recycling of plastic bottles using intelligent separation technologies is described. The method utilizes delayed fluorescence from long persistence phosphors. This facile approach can be used on existing recycling lines at little extra cost.}, - isbn = {978-1-5108-5899-2}, - keywords = {Long-persistence phosphors,Phosphors,Recycling plastics,Separation technologies} -} - -@article{silverioHowDoesCircular2023, - title = {How Does Circular Economy Work in Industry? {{Strategies}}, Opportunities, and Trends in Scholarly Literature}, - shorttitle = {How Does Circular Economy Work in Industry?}, - author = {Silv{\'e}rio, Ana Cristina and Ferreira, Jo{\~a}o and Fernandes, Paula Odete and Dabi{\'c}, Marina}, - year = {2023}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {137312}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137312}, - urldate = {2023-05-11}, - abstract = {The concept of circular economy (CE) has been a topic of interest for researchers, managers, and policy makers. It is recognised as the latest attempt to balance industrial development, environmental health, and economic growth. Although academic literature in this field has been gradually developing, it is limited in its analysis in terms of economic and competitive opportunity in the face of different strategies. This article provides a holistic view by mapping the literature on strategies-based EC for the economic competitiveness of companies through a systematic literature review supported on the co-citation bibliometric technique. To this end, 126 articles were selected and organised into 5 clusters: (i) strategic applications of CE; (ii) mediating factors for implementing CE strategies; (iii) drivers of CE strategies; (iv) determinants used to promote CE; and (v) emerging digital technologies used to enable CE practices. The results of this study help practitioners assess EC from a new point of view and design competitive strategies for a circular model without neglecting economic growth and competitive advantage, in addition to serving as crucial evidence for policymakers, helping them leverage policies to circumvent sustainability concerns and promote circularity. A future agenda for detailed cluster-based research is put forward based on the identified gaps, including a framework to help managers set priorities to escape the zero-profit trend associated with green and sustainable practices.}, - langid = {english}, - keywords = {Circular economy,Competitiveness,Strategies,Sustainability,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/VQSDDR47/Silvério et al. - 2023 - How does circular economy work in industry Strate.pdf;/Users/fabio/Zotero/storage/CL37ADZ2/S0959652623014701.html} -} - -@article{Silvestri2020, - title = {Regional Development of {{Circular Economy}} in the {{European Union}}: {{A}} Multidimensional Analysis}, - author = {Silvestri, Francesco and Spigarelli, Francesca and Tassinari, Mattia}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {255}, - pages = {120218}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120218} -} - -@article{Simmons2019, - title = {Psychological Predictors of Fishing and Waste Management Intentions in {{Indonesian}} Coastal Communities}, - author = {Simmons, Erik C. and Fielding, Kelly S.}, - year = {2019}, - month = oct, - journal = {Journal of Environmental Psychology}, - volume = {65}, - pages = {101324}, - publisher = {{Academic Press}}, - issn = {15229610}, - doi = {10.1016/j.jenvp.2019.101324}, - urldate = {2020-05-21}, - abstract = {The populations most susceptible to environmental degradation are often the populations that rely most on the natural world for sustenance. Within the many isolated islands that are part of rural Indonesia, many communities are dependent on natural resources for their livelihoods, but paradoxically members of these communities often engage in practices that destroy their natural resources. The current research uses survey methodology to investigate determinants of sustainable behavioral intentions of participants (N = 104) living in coastal communities in Sulawesi, Indonesia\textemdash specifically through the lens of an adapted theory of planned behavior model. Results showed that participants with stronger intentions to use nets and lines to fish had more negative attitudes to destructive fishing, a greater sense that their behavior and that of their community affects marine life, and greater belief that other villages are responsible for degrading reefs. Participants with stronger intentions to prevent their waste from going into the ocean had more negative attitudes to throwing waste in the ocean, greater perceptions of control over the behavior, and more positive perceptions of change in the health of the reefs. Although some of the findings align with theory and past research, some were unexpected, highlighting the importance of conducting research to identify motivators of sustainable practices in developing world, low resource communities.}, - keywords = {Fishing,Low-resource communities,Pro-environmental behavior,Sustainability,Theory of planned behavior,Waste} -} - -@article{simoensDiscursiveDynamicsLockins2022, - title = {Discursive Dynamics and Lock-Ins in Socio-Technical Systems: An Overview and a Way Forward}, - shorttitle = {Discursive Dynamics and Lock-Ins in Socio-Technical Systems}, - author = {Simoens, Machteld Catharina and Fuenfschilling, Lea and Leipold, Sina}, - year = {2022}, - month = sep, - journal = {Sustainability Science}, - volume = {17}, - number = {5}, - pages = {1841--1853}, - issn = {1862-4057}, - doi = {10.1007/s11625-022-01110-5}, - urldate = {2022-10-07}, - abstract = {Understanding the dynamics of stability and change is key to accelerate sustainability transitions. This paper aims to advance and inspire sustainability transition research on this matter by collecting insights from interpretative environmental discourse literature. We develop a heuristic that identifies and describes core discursive elements and dynamics in a socio-technical system. In doing so, we show how the interplay of meta-, institutionalized, and alternative discourses, dominant, marginal, and radical narratives, as well as weak and strong discursive agency influence the socio-technical configuration. The heuristic suggests three discursive lock-ins reinforcing the stabilization of socio-technical systems: unchallenged values and assumptions, incumbents' discursive agency, and narrative co-optation. Furthermore, it explores three pathways of discursive change: disruptive, dynamic and cross-sectoral. Overall, this paper puts forward a discursive perspective on sustainability transitions. It offers additional analytical approaches and concepts for discursive transition studies, elaborated insights on the dynamics within and between the analytical dimensions of a socio-technical system, as well as a theoretical baseline for analyzing discursive lock-in mechanisms and pathways of discursive change.}, - langid = {english}, - keywords = {Agency,Discourse,Lock-in,Narrative,Sustainability transitions,Transformation}, - file = {/Users/fabio/Zotero/storage/V6AMRKVW/Simoens et al_2022_Discursive dynamics and lock-ins in socio-technical systems.pdf} -} - -@article{Simon2019, - title = {What Are the Most Significant Aspects of Supporting the Circular Economy in the Plastic Industry?}, - author = {Simon, Balint}, - year = {2019}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {141}, - number = {November 2018}, - pages = {299--300}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2018.10.044}, - abstract = {Plastic is an indispensable material to our everyday life. However, some negative properties, for example, the durability under mild conditions, pose threat to the natural environment. The circular economy is an effort to mimic the loop-closing attribute of nature in anthropogenic systems. To bring plastics in such circularity in term of circular economy, a number of issues have to be handled from the quality of the recycled material to the acceptance of its use in new products. It is sometimes only a subtle step what we can do easily.}, - keywords = {Bio-plastic,Circular economy,Plastic,Recycling,Sustainability}, - file = {/Users/fabio/Zotero/storage/MW8VBFUL/What are the most significant aspects of supporting the circular economy in the plastic industry.pdf} -} - -@article{Simonet2020, - title = {The Search for Meaningful Work: {{A}} Network Analysis of Personality and the Job Characteristics Model}, - author = {Simonet, Daniel V. and Castille, Christopher M.}, - year = {2020}, - month = jan, - journal = {Personality and Individual Differences}, - volume = {152}, - pages = {109569}, - issn = {01918869}, - doi = {10.1016/j.paid.2019.109569} -} - -@article{simonRecyclingPolyurethanesLaboratory2018, - title = {Recycling of Polyurethanes from Laboratory to Industry, a Journey towards the Sustainability}, - author = {Sim{\'o}n, D. and Borreguero, A. M. and {de Lucas}, A. and Rodr{\'i}guez, J. F.}, - year = {2018}, - month = jun, - journal = {Waste Management}, - volume = {76}, - pages = {147--171}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2018.03.041}, - urldate = {2023-08-21}, - abstract = {The recycling of any kind of plastic to convert it in valuable products is one of the main challenges of today's society. Besides, if the recycling process is itself green, then it would be a great achievement. This paper reviews the way covered from the first attempts of reusing the polyurethane (PU) scraps as a filler for cushions to the last chemical routes employing green recycling agents. Polyurethane is the 6th most used polymer all over the world with a production of 18 millions tons per year, which means a daily production of PU specialties greater than 1 million of cubic meters, equivalent to the volume of the Empire State Building. The thermostable nature of the majority of the polyurethanes specialties has made that the preferred solution for their recycling are the chemical recycling processes. Among them, glycolysis is the one that receives a greater attention from an industrial point of view, so this review puts the spotlight on it. However, the existing reviews in literature do not paid a special attention on glycolysis and only give a superficial description of the process. Nevertheless, in the present review, the scientific literature relative to glycolysis is completely reviewed, updated and ordered according the type of PU specialty recycled. Additionally, the other main chemical recycling processes are also revisited in a more extended and deeper way than in the previous approaches to this topic. Moreover, it is crucial to take into account that some of these technologies, which were described in the literature as promising technologies at laboratory scale are now commercial processes running at industrial scale. For that reason, it is essential to remark that the present review comprises not only a detailed state of art of the scientific literature on the subject, also includes a detailed revision of the past and running on pilot plants and industrial facilities, including several patents, which has never been covered in the current literature. Moreover, this review also describes the most recent studies employing crude glycerol (biodiesel subproduct) as an economic, sustainable and environmental friendly cleavage agent, which should lead the way to the industrial implantation of split-phase glycolysis in a near future, providing high quality recovered products, susceptible of replacing raw ones in the synthesis of new PU specialties. What is more, this review intends that any reader could know and understand the reactions involved in the polyurethane chemistry and recycling, the main polyurethanes types and the fundamentals of the recycling strategies in order to comprehend what are the advantages and drawbacks of each recycling process as starting point for looking for new advantageous alternatives from an environmental, technical and economic point of view. Broader context. This paper reviews the main advances in the polyurethane (PU) recycling field, from laboratory and academia processes to pilot plant and industrial scale ones, including the most relevant patents in the subject. Opposite to other common used plastics, PUs are not polymerization but condensation polymers, synthesized from polyols and isocyanates. The wide diversity of polyols and isocyanates allows the synthesis of numerous different compounds covering a huge range of applications. As a direct consequence of their commercial success, an increasing quantity of PU waste is being disposed by landfilling in the last decades. Such waste comprises not only post-consumer products but also scrap from slabstock manufacturing, which can reach the 10\% of the total foam production. However, the massive enforcement of the environmental laws is pointing out a new route in the polymer waste removal sector based in the polymer recycling, and this fact has placed the research in waste treatment as one of the most prolific topics nowadays. In fact, polymer recycling processes have experienced a growing attention from the research and industrial worlds as a direct result of the enforcement of the environmental legislations. Hence, it is essential to develop new environmental sustainable recycling processes with the aim of conserving the natural resources, reducing the amount of waste disposed in landfills and enhancing the sustainability for forthcoming generation.}, - keywords = {Glycolysis,Industrial plant,Polyol,Polyurethane,Recycling}, - file = {/Users/fabio/Zotero/storage/5KAJSDGN/Simón et al_2018_Recycling of polyurethanes from laboratory to industry, a journey towards the.pdf;/Users/fabio/Zotero/storage/QGXSXTMY/S0956053X18301831.html} -} - -@article{simsekAnalysisAdditionalEnergy2020, - title = {An Analysis of Additional Energy Requirement to Meet the {{Sustainable Development Goals}}}, - author = {Simsek, Yeliz and Santika, Wayan G. and Anisuzzaman, M. and Urmee, Tania and Bahri, Parisa A. and Escobar, Rodrigo}, - year = {2020}, - month = jul, - journal = {Journal of Cleaner Production}, - pages = {122646}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122646}, - urldate = {2020-07-16} -} - -@incollection{Sin2013, - title = {Mechanical {{Properties}} of {{Poly}}(Lactic {{Acid}})}, - booktitle = {Polylactic {{Acid}}}, - author = {Sin, Lee Tin and Rahmat, Abdul Razak and Rahman, Wan Aizan Wan Abdul}, - year = {2013}, - pages = {177--219}, - publisher = {{Elsevier}}, - doi = {10.1016/B978-1-4377-4459-0.00005-6} -} - -@article{Singamneni2012a, - title = {Modeling and Evaluation of Curved Layer Fused Deposition}, - author = {Singamneni, Sarat and Roychoudhury, Asimava and Diegel, Olaf and Huang, Bin}, - year = {2012}, - month = jan, - journal = {Journal of Materials Processing Technology}, - volume = {212}, - number = {1}, - pages = {27--35}, - publisher = {{Elsevier B.V.}}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2011.08.001}, - urldate = {2012-11-19}, - keywords = {FDM,Fused deposition modeling}, - file = {/Users/fabio/Zotero/storage/7LMGNS7A/Modeling and evaluation of curved layer fused deposition.pdf} -} - -@article{Singamneni2019, - title = {Biopolymer {{Alternatives}} in {{Pellet Form}} for {{3D Printing}} by {{Extrusion}}}, - author = {Singamneni, Sarat and Warnakula, Anthony and Smith, Dawn A. and Le Guen, Marie Joo}, - year = {2019}, - journal = {3D Printing and Additive Manufacturing}, - volume = {00}, - number = {00}, - pages = {1--10}, - issn = {2329-7662}, - doi = {10.1089/3dp.2018.0152}, - keywords = {biopolymer composites,extrusion 3d printing,pellet forms,print parameters}, - file = {/Users/fabio/Zotero/storage/M2Y3YQTH/3D Printing and Additive Manufacturing.pdf} -} - -@article{Singh, - title = {Exploring {{3D Printing Alternatives}}}, - author = {Singh, S}, - pages = {277--291}, - file = {/Users/fabio/Zotero/storage/VBJYJ93A/Exploring 3D Printing Alternatives.pdf} -} - -@article{Singh2009, - title = {Eco-{{LCA}}: {{A}} Tool for Quantifying the Role of Ecological Resources in {{LCA}}}, - author = {Singh, Shweta and Bakshi, Bhavik R.}, - year = {2009}, - journal = {2009 IEEE International Symposium on Sustainable Systems and Technology, ISSST '09 in Cooperation with 2009 IEEE International Symposium on Technology and Society, ISTAS}, - pages = {1--6}, - publisher = {{IEEE}}, - doi = {10.1109/ISSST.2009.5156770}, - isbn = {9781424434565}, - file = {/Users/fabio/Zotero/storage/8IW9RKHL/Eco-LCA_A_tool_for_quantifying_the_role_of_ecological_resources_in_LCA.pdf} -} - -@article{Singh2011, - title = {Process Capability Study of Polyjet Printing for Plastic Components}, - author = {Singh, Rupinder}, - year = {2011}, - month = jun, - journal = {Journal of Mechanical Science and Technology}, - volume = {25}, - number = {4}, - pages = {1011--1015}, - issn = {1738-494X}, - doi = {10.1007/s12206-011-0203-8}, - urldate = {2014-01-22}, - keywords = {--------------------------------------------------,plastic components,polyjet printing,process capability}, - file = {/Users/fabio/Zotero/storage/M24HPPLV/Process capability study of polyjet printing for plastic components.pdf} -} - -@article{Singh2016a, - title = {Investigation for Dimensional Accuracy of {{AMC}} Prepared by {{FDM}} Assisted Investment Casting Using Nylon-6 Waste Based Reinforced Filament}, - author = {Singh, Rupinder and Singh, Jagdeep and Singh, Sunpreet}, - year = {2016}, - month = jan, - journal = {Measurement}, - volume = {78}, - pages = {253--259}, - publisher = {{Elsevier Ltd}}, - issn = {02632241}, - doi = {10.1016/j.measurement.2015.10.016}, - abstract = {In the recent years, the whole world is facing a serious problem in handling nylon-6 wastes of various societies like: fibres/textile, household, carpets, tires, military supplies, etc. Ordinary recycling process of such wastes is costlier process and also omits its major mechanical properties. In the present research work, nylon-6 waste (collected from local plastic based industry) has been recycled, through extrusion process, in the form of fused deposition modelling (FDM) feedstock filament. This alternatively developed FDM filament has been successfully used to fabricate sacrificial patterns for investment casting process (ICP). The process was started with investigating the melt flow index (MFI) of collected nylon-6 waste which was matched with the commercial FDM filament through reinforcement. Finally, single screw extruder of has been used for the development of FDM filament proportion with a mixture of 60\% nylon-6, 30\% Al and 30\% Al2O3 (by wt.). The resulting FDM patterns have been used in ICP for development of aluminum matrix composite (AMC). Taguchi L9 was used to investigate the affect of process parameters (volume of pattern, density of pattern and number of IC coatings) on dimensional accuracy of AMC developed. Apart from suggesting an alternative method for management and recycling of nylon-6 waste, the present research work also described a new approach for the development of AMC with tailor made properties.}, - keywords = {Aluminum matrix composite,Dimensional accuracy,Fused deposition modelling,Investment casting process,Nylon-6 waste,Single screw extruder}, - file = {/Users/fabio/Zotero/storage/B58UPFIF/Singh, Singh, Singh - 2016 - Investigation for dimensional accuracy of AMC prepared by FDM assisted investment casting using nylon-6 was.pdf} -} - -@article{Singh2017, - title = {Material Issues in Additive Manufacturing: {{A}} Review}, - author = {Singh, Sunpreet and Ramakrishna, Seeram and Singh, Rupinder}, - year = {2017}, - month = jan, - journal = {Journal of Manufacturing Processes}, - volume = {25}, - pages = {185--200}, - publisher = {{The Society of Manufacturing Engineers}}, - issn = {15266125}, - doi = {10.1016/j.jmapro.2016.11.006}, - keywords = {additive manufacturing}, - file = {/Users/fabio/Zotero/storage/M7QIJUN8/Material issues in additive manufacturing- A review.pdf} -} - -@article{Singh2017a, - title = {Towards Zero Waste Manufacturing: {{A}} Multidisciplinary Review}, - author = {Singh, Sunpreet and Ramakrishna, Seeram and Gupta, Munish Kumar}, - year = {2017}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {168}, - pages = {1230--1243}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.09.108}, - abstract = {The word ``Waste'' normally emphasis something around us which should be re-cycle, re-used, reduced or even eliminated, if possible. A giant amount of waste, such as: electronics/electrical items, manufacturing scrap, discarded constructional materials, polymers from daily needs, etc., is being generated day-by-day, whereas its treatment is lagging. The term zero waste (ZW) is continuously encouraging both producers and consumers to adopt sustainable approaches in order to reduce their expenditures as well as to help in making a better world. In the past, researchers have highlighted numerous techniques to tackle physical waste, however the chemicals which are normally generated from this waste is more critical and limitedly reported. Zero Waste Manufacturing (ZWM) is believed as a roadmap for future of manufacturing by which the burning issue of ``Waste'' can be tackled. However, ZWM can be supported with recycling and reusability of the produced wastes in another manufacturing process, use of optimization tools and sustainable manufacturing theories, development of precision manufacturing systems, etc. This review article is taken up to discuss various recent sustainable manufacturing ideas applied in the prominent sectors with an aim to either re-cycle/re-use the discarded ones or to produce a fresh part in eco-friendly manners. Special attention is paid to the current trends in machining and a brief case study of sustainable manufacturing of aerospace industry has also been discussed.}, - keywords = {Additive manufacturing,Constructional waste,Electronic and electrical waste,Polymer waste,Recycle,Reuse,Sustainable manufacturing,Zero waste manufacturing}, - file = {/Users/fabio/Zotero/storage/7BYA6L3K/Towards zero waste manufacturing- A multidisciplinary review.pdf} -} - -@article{Singh2017b, - title = {Recycling of Plastic Solid Waste: {{A}} State of Art Review and Future Applications}, - author = {Singh, Narinder and Hui, David and Singh, Rupinder and Ahuja, I.P.S. and Feo, Luciano and Fraternali, Fernando}, - year = {2017}, - month = apr, - journal = {Composites Part B: Engineering}, - volume = {115}, - pages = {409--422}, - publisher = {{Elsevier Ltd}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2016.09.013}, - abstract = {a b s t r a c t Plastic solid waste (PSW) of polymers (like: high density polyethylene (HDPE), low density polyethylene (LDPE), Nylon etc.) is creating new challenges, which in today's scenario are major research concerns. A sharp rise has been observed in production of different products based on different plastic material. This huge increase in plastic commodities also increases the waste generation thus creating new challenges. Some researchers have reported work in the field of PSW management with different recycling methods. This paper compiles the different research work done by researchers in this field of recycling and progress in recovery and management of PSW by different methods (i.e. Primary, secondary, tertiary and quaternary) along with the various identification/separation techniques. Further, this paper reviews the effect on properties of virgin and recycled HDPE/LDPE/Nylon PSW with different reinforcements like sand, natural fibre, hemp fibre, metal powder etc.}, - isbn = {0256-9574}, - pmid = {18350221}, - file = {/Users/fabio/Zotero/storage/LNMHJG32/Recycling of plastic solid waste A state of art review and future applications.pdf} -} - -@article{Singh2017c, - title = {Experimental Investigation on Shore Hardness of Barrel-Finished {{FDM}} Patterns}, - author = {Singh, Rupinder and Trivedi, Alok and Singh, Sunpreet}, - year = {2017}, - month = sep, - journal = {S\=adhan\=a}, - volume = {42}, - number = {9}, - pages = {1579--1584}, - issn = {0256-2499}, - doi = {10.1007/s12046-017-0709-6}, - file = {/Users/fabio/Zotero/storage/XHB5URJF/Envisioning the era of 3D printing- a conceptual model for the fashion industry.pdf} -} - -@article{Singh2018, - title = {Recycling of Polymer Waste with {{SiC}}/{{Al2O3}} Reinforcement for Rapid Tooling Applications}, - author = {Singh, Narinder and Singh, Rupinder and Ahuja, I.P.S.}, - year = {2018}, - month = jun, - journal = {Materials Today Communications}, - volume = {15}, - number = {May 2017}, - pages = {124--127}, - publisher = {{Elsevier}}, - issn = {23524928}, - doi = {10.1016/j.mtcomm.2018.02.008}, - abstract = {In this research work an effort has been made to develop in house feed stock filament wire made up of recycled polymer waste as base matrix with SiC/Al2O3reinforcement for sustainable development. The process starts with collection of waste polymer (high density polyethylene (HDPE) as a case study) from local industry. After manual segregation of contamination from waste polymer, initially rheological and thermal properties like: melt flow index (MFI), melting temperature, decomposition and enthalpy of the base polymer as well as reinforced with ceramic particle in different proportions, were tested. Further based upon thermal properties different proportions of HDPE, SiC and Al2O3were prepared by using mini compounder (twin screw extruder) to ensure uniform dispersion. After this single screw extruder was used to prepare filament wire of uniform diameter for fused deposition modelling (FDM) setup. The filament wire so prepared was tested for its tensile properties by using universal testing machine (UTM) and various mechanical properties like: peak strength, break strength, percentage elongation and peak load etc. were established. Finally scanning electron micrographs (SEM) were obtained to understand the distribution of ceramic particles in filament wire. This study highlights the detailed procedure for managing the polymer waste with novel method by using recycled polymer as rapid tooling. This will enhance the sustainability and also helps to develop low cost, in-house open source FDM setup, rapid tooling (as ceramic particles in filament wire will enhance surface properties).}, - keywords = {Additive manufacturing,FDM,HDPE,Mechanical properties,Recycled polymer}, - file = {/Users/fabio/Zotero/storage/H26LDT5J/recycling of polymer waste with sical2o3 reinforcement for rapid tooling applications.pdf} -} - -@article{Singh2018a, - title = {Additive {{Manufacturing}} of {{Syntactic Foams}}: {{Part}} 1: {{Development}}, {{Properties}}, and {{Recycling Potential}} of {{Filaments}}}, - author = {Singh, Ashish Kumar and Patil, Balu and Hoffmann, Niklas and Saltonstall, Brooks and Doddamani, Mrityunjay and Gupta, Nikhil}, - year = {2018}, - month = mar, - journal = {JOM}, - volume = {70}, - number = {3}, - pages = {303--309}, - publisher = {{Springer US}}, - issn = {1047-4838}, - doi = {10.1007/s11837-017-2734-7}, - abstract = {\textcopyright{} 2018 The Minerals, Metals \& Materials Society This work focuses on developing filaments of high-density polyethylene (HDPE) and their hollow particle-filled syntactic foams for commercial three-dimensional (3D) printers based on fused filament fabrication technology. Hollow fly-ash cenospheres were blended by 40 wt.\% in a HDPE matrix to produce syntactic foam (HDPE40) filaments. Further, the recycling potential was studied by pelletizing the filaments again to extrude twice (2\texttimes ) and three times (3\texttimes ). The filaments were tensile tested at 10 -4 s -1 , 10 -3 s -1 , and 10 -2 s -1 strain rates. HDPE40 filaments show an increasing trend in modulus and strength with the strain rate. Higher density and modulus were noticed for 2\texttimes{} filaments compared to 1\texttimes{} filaments because of the crushing of some cenospheres in the extrusion cycle. However, 2\texttimes{} and 3\texttimes{} filament densities are nearly the same, showing potential for recycling them. The filaments show better properties than the same materials processed by conventional injection molding. Micro-CT scans show a uniform dispersion of cenospheres in all filaments.}, - file = {/Users/fabio/Zotero/storage/6PP4D7DS/additive manufacturing of syntactic foams- part 1- development, properties, and recycling potential of filaments.pdf} -} - -@article{Singh2018b, - title = {Sustainability of {{Recycled ABS}} and {{PA6}} by {{Banana Fiber Reinforcement}}: {{Thermal}}, {{Mechanical}} and {{Morphological Properties}}}, - author = {Singh, Rupinder and Kumar, Ranvijay and Ranjan, Nishant}, - year = {2019}, - month = apr, - journal = {Journal of The Institution of Engineers (India): Series C}, - volume = {100}, - number = {2}, - pages = {351--360}, - publisher = {{Springer India}}, - issn = {2250-0545}, - doi = {10.1007/s40032-017-0435-1}, - keywords = {\'a,ABS,Banana fibers,banana fibers \'a abs,Fused deposition modelling,fused deposition modelling \'a,Mechanical,mechanical \'a thermal,PA6,pa6 \'a recycling \'a,Recycling,Thermal,Twin screw extrusion,twin screw extrusion \'a}, - file = {/Users/fabio/Zotero/storage/TSB4DGLT/sustainability of recycled abs and pa6 by banana fiber reinforcement- thermal, mechanical and morphological properties.pdf} -} - -@article{Singh2018c, - title = {On {{Development}} of {{Functionally Graded Material Through Fused Deposition Modelling Assisted Investment Casting}} from {{Al2O3}}/{{SiC Reinforced Waste Low Density Polyethylene}}}, - author = {Singh, Narinder and Singh, Rupinder and Ahuja, I P S}, - year = {2018}, - month = oct, - journal = {Transactions of the Indian Institute of Metals}, - volume = {71}, - number = {10}, - pages = {2479--2485}, - publisher = {{Springer India}}, - issn = {0972-2815}, - doi = {10.1007/s12666-018-1378-9}, - isbn = {1266601813}, - keywords = {Al2O3,Casting,Deposition,FGM,Fused,Investment,LDPE,Modelling,Polymer waste,Reinforcements,SiC}, - file = {/Users/fabio/Zotero/storage/WC8GWG3M/On Development of Functionally Graded Material Through Fused Deposition Modelling Assisted Investment Casting from Al2O3SiC Reinforced Waste Low Density Polyethylene.pdf} -} - -@article{Singh2018d, - title = {Thermomechanical Investigations of {{SiC}} and {{Al}} 2 {{O}} 3 \textendash Reinforced {{HDPE}}}, - author = {Singh, Narinder and Singh, Rupinder and Ahuja, {\relax IPS}}, - year = {2019}, - month = oct, - journal = {Journal of Thermoplastic Composite Materials}, - volume = {32}, - number = {10}, - pages = {1347--1360}, - issn = {0892-7057}, - doi = {10.1177/0892705718796544}, - abstract = {This research work highlights the thermomechanical investigations of silicon carbide (SiC) and aluminum oxide (Al 2 O 3 )\textendash reinforced high-density polyethylene (HDPE)\textendash based feed stock filament of commercial fused deposition modeling (FDM) setup. The recycled HDPE waste was collected (from domestic waste) and washed with water jet for removal of contamination in the first stage. After contamination removal, rheological and thermal behavior (melt flow index, melting temperature, decomposition and enthalpy, etc.) of the unreinforced and reinforced polymer matrix was observed. The SiC and Al 2 O 3 reinforcements in the HDPE matrix have been controlled by twin-screw extrusion process, followed by its processing on single-screw extrusion for preparation of FDM feed stock filament. The feed stock filament prepared by single-screw extruder was subjected to tensile test for mechanical properties (such as peak strength, peak load, and Young's modulus). After ascertaining mechanical properties, multifactor optimization has been performed. Finally, scanning electron micrographs were obtained to understand the distribution of ceramic particles. This study highlights the detailed procedure for managing the polymer waste with improved mechanical properties by considering multifactor optimization. This will enhance the sustainability and also helps to develop low-cost, in-house FDM filament for possible applications as rapid tooling.}, - keywords = {Additive manufacturing,fused deposition modeling,high-density polyethylene,rapid tooling,recycled polymer,thermomechanical}, - file = {/Users/fabio/Zotero/storage/LCJVS8L7/Thermomechanical investigations of SiC and Al 2 O 3 –reinforced HDPE.pdf} -} - -@incollection{Singh2018e, - title = {Prospect of {{3D Printing}} for {{Recycling}} of {{Plastic Product}} to {{Minimize Environmental Pollution}}}, - booktitle = {Reference {{Module}} in {{Materials Science}} and {{Materials Engineering}}}, - author = {Singh, Rupinder and Kumar, Ranvijay and Singh, Paramvir}, - year = {2018}, - pages = {1--14}, - publisher = {{Elsevier}}, - doi = {10.1016/B978-0-12-803581-8.11347-5}, - abstract = {During the past decades increase in the worldwide population resulted in raised consumption of plastic products (e.g., household appliances, packaging, construction, medicine, electronics, and automotive and aerospace components.), which has lead to adverse environmental impact and resource depletion. One of the solutions to address this problem is recycling of plastic products. Plastic recycling is the output of intermediate stages of collection, sorting by type, and processing of polymers. Plastic recycling reduces the quantity of residues in landfills and those indiscriminately discarded in the environment. Thus recycling lead to reducing the chance of diseases spread due to contamination of water, air and soil. In this article, plastic recycling as the state of art review has been projected with prospect to minimize the environmental pollution. Three different case studies of plastic recycling by reinforcement of banana fiber (BF) in polymer matrix have been presented for field engineers. The thermoplastics (like: ABS, PA6, HDPE and LDPE) have been selected (based upon their field applications) and extruded by twin screw extrusion (TSE) in filament form (Diameter: 1.75 mm) for 3D printing applications. Further studies have been conducted, to check effects of process parameters on the mechanical, thermal and morphological properties of extruded plastics reinforced with BF.}, - isbn = {978-0-12-803581-8}, - keywords = {ABS,HIPS,Multi-material 3D printing,PLA,Pull out test,Tensile strength}, - file = {/Users/fabio/Zotero/storage/PW4YY24G/singh2018.pdf} -} - -@article{Singh2019, - title = {On the Additive Manufacturing of an Energy Storage Device from Recycled Material}, - author = {Singh, Rupinder and Singh, Harpreet and Farina, Ilenia and Colangelo, Francesco and Fraternali, Fernando}, - year = {2019}, - month = jan, - journal = {Composites Part B: Engineering}, - volume = {156}, - pages = {259--265}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2018.08.080}, - file = {/Users/fabio/Zotero/storage/P8DGMLUX/On the additive manufacturing of an energy storage device from recycled material.pdf} -} - -@article{Singh2019a, - title = {Multi-{{Material Additive Manufacturing}} of {{Sustainable Innovative Materials}} and {{Structures}}}, - author = {Singh, Rupinder and Kumar, Ranvijay and Farina, Ilenia and Colangelo, Francesco and Feo, Luciano and Fraternali, Fernando}, - year = {2019}, - month = jan, - journal = {Polymers}, - volume = {11}, - number = {1}, - pages = {62}, - issn = {2073-4360}, - doi = {10.3390/polym11010062}, - abstract = {This paper highlights the multi-material additive manufacturing (AM) route for manufacturing of innovative materials and structures. Three different recycled thermoplastics, namely acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), and high impact polystyrene (HIPS) (with different Young's modulus, glass transition temperature, rheological properties), have been selected (as a case study) for multi-material AM. The functional prototypes have been printed on fused deposition modelling (FDM) setup as tensile specimens (as per ASTM D638 type-IV standard) with different combinations of top, middle, and bottom layers (of ABS/PLA/HIPS), at different printing speed and infill percentage density. The specimens were subjected to thermal (glass transition temperature and heat capacity) and mechanical testing (peak load, peak strength, peak elongation, percentage elongation at peak, and Young's modulus) to ascertain their suitability in load-bearing structures, and the fabrication of functional prototypes of mechanical meta-materials. The results have been supported by photomicrographs to observe the microstructure of the analyzed multi-materials.}, - file = {/Users/fabio/Zotero/storage/VTUMQTKL/Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures.pdf} -} - -@article{Singh2019b, - title = {Waste Thermosetting Polymer and Ceramic as Reinforcement in Thermoplastic Matrix for Sustainability: {{Thermomechanical}} Investigations}, - author = {Singh, Rupinder and Singh, Inderpreet and Kumar, Ranvijay and Brar, G. S.}, - year = {2019}, - journal = {Journal of Thermoplastic Composite Materials}, - pages = {1--13}, - issn = {15307980}, - doi = {10.1177/0892705719847237}, - keywords = {ceramics,compositions,thermoplastics,Thermosetting,twin-screw extruder}, - file = {/Users/fabio/Zotero/storage/RLJZ3MCV/Waste thermosetting polymer and ceramic as reinforcement in thermoplastic matrix for sustainability- Thermomechanical investigations.pdf} -} - -@article{Singh2019c, - title = {Investigations on {{3D}} Printed Thermosetting and Ceramic-Reinforced Recycled Thermoplastic-Based Functional Prototypes}, - author = {Singh, Rupinder and Kumar, Ranvijay and Singh, Inderpreet}, - year = {2019}, - month = jul, - journal = {Journal of Thermoplastic Composite Materials}, - pages = {089270571986462}, - issn = {0892-7057}, - doi = {10.1177/0892705719864623}, - abstract = {The 3D printing of thermoplastic polymers (both virgin and reinforced with metal/ceramic particles) has been widely explored in recent past with fused deposition modelling (FDM) process. But hitherto very little has been reported on 3D printing of thermoplastics polymers with reinforcement of thermosetting polymers and ceramic particles. This article is an extension of work reported on thermo-mechanical investigations on waste thermosetting polymer bakelite and ceramic (silicon carbide and aluminium oxide) as reinforcement in recycled acrylonitrile butadiene styrene (ABS) thermoplastic matrix for sustainability. The study reports the experimental investigations on mechanical (tensile), morphological, surface hardness and thermal stability analysis of 3D printed functional prototype as tensile specimen (as per ASTM D 638). In the present case study, it has been ascertained that composition/proportion of thermoplastic matrix has a significant role in controlling the mechanical properties, whereas other input process parameters of FDM are insignificant. The results of the study suggest that thermosetting and ceramic-reinforced ABS thermoplastic-based 3D printed parts have mechanical properties at par with unreinforced ABS.}, - isbn = {0892705719864}, - keywords = {3d printing,bakelite,ceramics,fused deposition modelling,thermoplastic}, - file = {/Users/fabio/Zotero/storage/2FEQ2GLK/Investigations on 3D printed thermosetting and ceramic-reinforced recycled thermoplastic-based functional prototypes.pdf} -} - -@article{Singh2019d, - title = {Investigations for Tensile, Compressive and Morphological Properties of {{3D}} Printed Functional Prototypes of {{PLA-PEKK-HAp-CS}}}, - author = {Singh, Rupinder and Singh, Gurchetan and Singh, Jaskaran and Kumar, Ranvijay}, - year = {2019}, - month = aug, - journal = {Journal of Thermoplastic Composite Materials}, - pages = {089270571987059}, - issn = {0892-7057}, - doi = {10.1177/0892705719870595}, - abstract = {This article reports the experimental investigations for tensile, compressive and morphological properties of 3D printed functional prototypes composed of polylactic acid (PLA) reinforced with poly ether ketone ketone (PEKK), hydroxyapatite (HAp) and chitosan (CS). The PLA-PEKK-HAp-CS composite has wide applications as scaffolds in orthopaedics and clinical dentistry. The tensile and compressive specimens were printed (as per ASTM D638 type IV and ASTM D695) with in-house prepared feedstock filament on commercial fused deposition modelling setup by following Taguchi-based design of experiment. The results are also supported by hardness data and photomicrographs.}, - keywords = {compressive,functional prototypes,morphological,pekk,pla,tensile properties}, - file = {/Users/fabio/Zotero/storage/MUNK33PX/Investigations for tensile, compressive and morphological properties of 3D printed functional prototypes of PLA-PEKK-HAp-CS.pdf} -} - -@article{Singh2019e, - title = {Grassroots Innovation and Entrepreneurial Success: {{Is}} Entrepreneurial Orientation a Missing Link?}, - author = {Singh, Sonal H. and Bhowmick, Bhaskar and Eesley, Dale and Sindhav, Birud}, - year = {2019}, - month = mar, - journal = {Technological Forecasting and Social Change}, - pages = {119582}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.02.002}, - urldate = {2020-03-30}, - abstract = {Grassroots innovation is rapidly gaining research attention because of its crucial role in entrepreneurship development. Although entrepreneurial orientation holds the key for entrepreneurial success, research on how entrepreneurial orientation impacts the relationship between grassroots innovation (GRI) and entrepreneurial success is critical. This research is still in its infancy and has not adequately been addressed. This study endeavors to fill this gap while examining how the three factors of grassroots innovation such as new grassroots learning practices, local solution and networking capabilities influence entrepreneurial orientation enroute to affecting economic benefits and non-economic benefits from entrepreneurial activity. The study involved data from 400 grassroots innovators and a structural equation modeling approach was used to fit the data based on the aforementioned factors and components. The study reveals that entrepreneurial orientation is observed to fully mediate the relationship between the following three linear dependencies: new grassroots learning practices and economic benefits, networking capabilities and economic benefits, and local solution and non-economic benefits. This study also found that entrepreneurial orientation partially mediates the relationship in the following cases: new grassroots learning practices and non-economic benefits, networking capabilities and non-economic benefits, and local solution and economic benefits. The results provide empirical evidence to support that entrepreneurial orientation spurred by grassroots innovation significantly influence entrepreneurial success in the Indian context.}, - keywords = {Entrepreneurial orientation,Entrepreneurial success,Grassroots innovation,Structural equation model} -} - -@article{Singh2020a, - title = {Bibliometric Overview of the {{Technological Forecasting}} and {{Social Change}} Journal: {{Analysis}} from 1970 to 2018}, - author = {Singh, Shiwangi and Dhir, Sanjay and Das, V. Mukunda and Sharma, Anuj}, - year = {2020}, - journal = {Technological Forecasting and Social Change}, - volume = {154}, - number = {January}, - pages = {119963}, - publisher = {{Elsevier}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119963}, - abstract = {The purpose of this paper is to analyze the evolution of Technological Forecasting and Social Change journal for a period between 1970 and 2018 for 4248 articles. The growing scope and diversity of the field creates fragmentation and the belief that reviews could contribute to synthesis and integration. This analysis includes key factors impacting growth of a journal such as publication evolution and citation structure, most cited articles, leading authors, institutions and countries, related journals and ranking, key research streams in the journal, and co-citation analysis. Factors of the Technological Forecasting and Social Change journal determine the relationship between various sub-fields. The analysis also provides key insights about the evolution of the field over time.}, - keywords = {Bibliometrics,Co-citation analysis,Factor analysis,Journal analysis,Keyword co-occurrences,Technological Forecasting and Social Change}, - file = {/Users/fabio/Zotero/storage/HDATA732/Bibliometric overview of the Technological Forecasting and Social Change journal Analysis from 1970 to 2018.pdf} -} - -@article{Singh2020c, - ids = {Singh2020b}, - title = {Assessing the Appropriate Grassroots Technological Innovation for Sustainable Development}, - author = {Singh, Sonal H. and Maiyar, Lohithaksha M. and Bhowmick, Bhaskar}, - year = {2020}, - month = feb, - journal = {Technology Analysis and Strategic Management}, - volume = {32}, - number = {2}, - pages = {175--194}, - publisher = {{Routledge}}, - issn = {14653990}, - doi = {10.1080/09537325.2019.1646420}, - urldate = {2020-03-30}, - abstract = {Grassroots technological innovation (GRTI) is perceived as a source of sustainable development while addressing local problems and needs of people belonging to the bottom of the economic pyramid. The fostering of sustainable development develops a need for scientific evaluation and subsequent diffusion of GRTI to ameliorate the livelihood of grassroots communities. It is, hence, the purpose of this research to assess the relative performance of different GRTIs with respect to economic, social, and environmental benefits. The empirical data for this study comprised of 32 GRTIs from the three different rural non-farm sectors in the Indian context. Analytical hierarchy process is used for deducing the relative assessment of the selected GRTI against the aforementioned performance criteria. The findings of this study offer imperative insights into the field of technology diffusion and development at the grassroots level and suggest recommendations for sustainable policy formulation.}, - keywords = {analytical hierarchy process,Grassroots technological innovation,sustainable development} -} - -@article{Singh2020d, - title = {Current Status and Future Directions of Fused Filament Fabrication}, - author = {Singh, Sunpreet and Singh, Gurminder and Prakash, Chander and Ramakrishna, Seeram}, - year = {2020}, - journal = {Journal of Manufacturing Processes}, - volume = {55}, - pages = {288--306}, - issn = {15266125}, - doi = {10.1016/j.jmapro.2020.04.049}, - urldate = {2021-02-16}, - abstract = {Fused filament fabrication (FFF), a much-appreciated three-dimensional printing (3DP) technology, has triggered the industrial innovations by providing viable and cost-effective solutions for design validations, product prototyping, and the production of high-performance functional components. Indeed, the main credit of its successful career goes to material and printing flexibilities. However, the technology still faces various downsides, including poor finish, geometrical fits and tolerances, anisotropy, in-printing errors, and limited mechanical strength, that cannot be easily outweighed as these suppress its practical implications. As of utmost necessity, this review paper discusses the various abilities and inabilities of this technology to generate a roadmap of futuristic tasks for better outcomes. The review paper will act as a first-hand reference, through the well-defined possible directions, to the young researchers and senior scientist.}, - keywords = {3D printing,Additive manufacturing,Feedstock,Fused deposition modelling,Fused filament fabrication,Printing inabilities,Quality characteristics}, - file = {/Users/fabio/Zotero/storage/LS9PJVLN/full-text.pdf} -} - -@article{Singh2021, - title = {Critical Success Factors for New Horizons in the Supply Chain of 3-{{D}} Printed Products \textendash{} {{A}} Review}, - author = {Singh, Satbir and Agrawal, Vivek}, - year = {2021}, - journal = {Materials Today: Proceedings}, - issn = {22147853}, - doi = {10.1016/j.matpr.2020.11.819}, - urldate = {2021-03-20}, - abstract = {3-D printing is an emerging disruptive technology to disrupt existing manufacturing systems. This technology has tremendous potential to improve the quality and complexity of engineering products and also to raise the standard of life. Many big corporations and agencies are working to leverage this disruptive technology. This technology has not become as popular as the internet of things, etc. 3-D printing can help in sustainable operations via cost optimization, lead time reduction, safety incorporation, and better functionalities in the final products. The supply chain management of 3-D printed products is a must on digital platforms for the effective delivery of products and services of this evolving technology. No concrete study could be found that linked the supply chain management with the critical success factors of the 3-D printing industry. Hence this study was undertaken to understand the technical, economic, and managerial aspects that are critical for smooth operations of supply chains of 3-D printed products. This study is based on the literature review that includes various relevant articles available in the public domain regarding the supply chain of 3-D printed goods, 3-D printing industry reports, and research papers on Additive Manufacturing technology. The study concluded with the critical success factors for a customer-oriented supply chain of 3-D printed parts. Further research through case studies is required to study the bottlenecks and potential of improvements in the AM industry in some developed countries where 3-D printing manufacturers are in good numbers.}, - keywords = {Additive manufacturing 3D printing,Biomedical sector,Covid-19,Supply chain}, - file = {/Users/fabio/Zotero/storage/A5BY45ZC/full-text.pdf} -} - -@article{singhCOVID19WasteManagement2020, - title = {{{COVID-19}} Waste Management: {{Effective}} and Successful Measures in {{Wuhan}}, {{China}}}, - author = {Singh, Narendra and Tang, Yuanyuan and Zhang, Zuotai and Zheng, Chunmiao}, - year = {2020}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {163}, - pages = {105071}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105071}, - urldate = {2020-08-09}, - abstract = {Highlights \textbullet{} Medical wastes will drastically increase due to Covid-19-outbreak. \textbullet{} Safe and sustainable waste management is a major concern. \textbullet{} Experience and lessons can be learned for medical waste management in China.}, - file = {/Users/fabio/Zotero/storage/QRUFAJU2/full-text.pdf} -} - -@article{singhRoleBigData2019, - title = {Role of Big Data Analytics in Developing Sustainable Capabilities}, - author = {Singh, Sanjay Kumar and {El-Kassar}, Abdul Nasser}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {213}, - pages = {1264--1273}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.199}, - urldate = {2020-06-18}, - abstract = {The purpose of this study is to examine the extent of sustainable capabilities driven by corporate commitment resulting from the integration of big data technologies, green supply chain management, and green human resource management practices, and the extent to which these capabilities can enhance the broader firm performance. The study was also designed to investigate the degree to which green human resource management practices influence the integration of big data technologies with processes and enhance the relationships between green supply chain management practices, both internal and external, as well as their influence on sustainable performance. We used dynamic capabilities theory and proposed a conceptual research model which was tested empirically. The findings of our study establish the influence of big data driven strategies on business growth in terms of sustainable performance by considering internal processes that constitute sustainable capabilities. The study recommends the integration of green supply chain management, green human resource management practices, and big data management to enhance firms' sustainable capabilities that lead to better sustainable performance.}, - keywords = {And environmental \& organizational performance,Big data,Corporate commitment,Green human resource management practices,Green supply chain management,Sustainable capabilities} -} - -@article{Sirin2014, - title = {The {{Effects}} of {{Thermomechanical Cycles}} on the {{Properties}} of {{PLA}}/{{TPS Blends}}}, - author = {Sirin, Humeyra and Tuna, Basak and Ozkoc, Guralp}, - year = {2014}, - journal = {Advances in Polymer Technology}, - volume = {33}, - number = {S1}, - pages = {n/a-n/a}, - issn = {07306679}, - doi = {10.1002/adv.21458}, - keywords = {blend,lactic acid,poly,recycling,thermoplastic starch}, - file = {/Users/fabio/Zotero/storage/C6SNBTJW/The Effects of Thermomechanical Cycles on the Properties of PLATPS Blends.pdf} -} - -@article{Sitadewi2021, - ids = {sitadewi2021}, - title = {Bibliographic Mapping of Post-Consumer Plastic Waste Based on Hierarchical Circular Principles across the System Perspective}, - author = {Sitadewi, Dania and Yudoko, Gatot and Okdinawati, Liane}, - year = {2021}, - month = jun, - journal = {Heliyon}, - volume = {7}, - number = {6}, - pages = {e07154}, - publisher = {{Elsevier}}, - issn = {24058440}, - doi = {10.1016/j.heliyon.2021.e07154}, - urldate = {2021-06-08}, - abstract = {The current dominating production and consumption model is based on the linear economy (LE) model, within which raw materials are extracted-processed-consumed-discarded. A circular economy (CE) constitutes a regenerative systemic approach to economic development which views waste as a valuable resource to be reprocessed back into the economy. In order to understand the circular strategy for a systemic change from an LE to a CE as a means of resolving the issue of plastic waste, this research aims to map current circular strategy trends across the system perspective contained in the literature relating to plastic CE literature. The novelty of the research lies in the mapping and review of the distribution of comprehensive circular strategies within the 9R framework across the entire system perspective (e.g. micro-meso-macro) down to its sub-levels in the literature on a plastic CE. The bibliographic mapping and systematic literature review iindicateed that the majority of the research focused on recycle (R8), followed by refuse (R0), reuse (R3), and reduce (R2). Certain circular strategies are more appropriate to handling certain plastic materials, despite CE's favoring of prevention and recycling over incineration. Recover (R9) is often used to process mixed and contaminated plastic. Recycling (R8) is the most popular circular strategy and the most applicable to plastic material with three recycle trends, namely; mechanical recycling, chemical recycling and DRAM (Distributed-Recycling-and-Additive-Manufacturing). Prolonging the product life through refurbishing (R5) is not applicable to plastic due to its material limitations. Reduce (R2) popularity as circular strategy reflects the preference to reduce consumption, either by launching campaigns to prevent waste or increasing production efficiency. Research on Rethink (R1) has largely focused on rethinking product design, consumer and organization behavior and perceptions of CE. Refuse (R0) strategy is an adoption of bio-based plastics which have a similar function to fossil-based plastics.}, - keywords = {9R framework,Circular economy,Circular strategy,Plastic,System perspective}, - file = {/Users/fabio/Zotero/storage/TI6JSYRP/Sitadewi et al. - 2021 - Bibliographic mapping of post-consumer plastic was.pdf;/Users/fabio/Zotero/storage/T5Y2GE56/S2405844021012573.html} -} - -@article{Sjoo2019, - title = {Demonstration Projects in Sustainable Technology: {{The}} Road to Fulfillment of Project Goals}, - author = {Sj{\"o}{\"o}, Karolin and Frishammar, Johan}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {228}, - pages = {331--340}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.302}, - urldate = {2020-05-21}, - abstract = {Publicly funded demonstration projects represent a critical intermediate step between basic R\&D on the one hand, and large-scale commercialization of new sustainable technology on the other. However, these projects often suffer from various technical and nontechnical difficulties, frequently fail to meet objectives, and sometimes stall despite the best intentions of their facilitators. This paper reports on a multiple case study of 21 demonstration projects in the area of sustainable technology set in Sweden and offers two contributions. First, it maps the project-internal and external factors that allow or prohibit demonstration projects to reach their goals. Second, it suggests a process model outlining the key activities for setting up a new demonstration project. By doing so, the paper provides important implications for the process of developing and commercializing sustainable technologies. The escalating environmental crisis in particular underscores the need for new knowledge about how cleaner and more sustainable technologies can be applied.} -} - -@article{skeltonStatisticalEntropyResources2022, - title = {Statistical Entropy of Resources Using a Categorization Tree for Material Enumeration: {{Framework}} Development and Application to a Plastic Packaging Case Study}, - author = {Skelton, Martin and Huysveld, Sophie and De Meester, Steven and Van Geem, Kevin M. and Dewulf, Jo}, - year = {2022}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {181}, - pages = {106259}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106259}, - urldate = {2022-03-14} -} - -@inproceedings{Skiba2012d, - title = {A Space for Innovation Process Acceleration, Supporting Collaborative Citizens Workshops}, - booktitle = {2012 18th {{International ICE Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} "{{Innovation}} by {{Collaboration}} and {{Entrepreneurial Partnerships}}"}, - author = {Skiba, Nathalie and Dupont, Laurent and Morel, Laure and Guidat, Claudine}, - year = {2012}, - pages = {1--9}, - publisher = {{IEEE}}, - address = {{Munich, Germany}}, - doi = {10.1109/ICE.2012.6297646}, - isbn = {978-1-4673-2275-1}, - keywords = {Abstracts,Acceleration,citizens workshop,city of Nancy,collaborative citizen workshops,collaborative work,eco-district redevelopment,EMA space functions,environment and methodology of acceleration space,environmental management,France,Ideas exploration environment,innovation management,innovation process acceleration,living lab approach,multidisciplinary collaborative work,organisational aspects,participative workshop organization,politicians,technicians,urban project,uses analysis,World Wide Web} -} - -@inproceedings{Skiba2013, - title = {How to Emphasize the "Living" Part of {{Living Lab}} Projects?}, - booktitle = {Conference {{Proceedings}} of the {{IEEE Technology Management Conference}} \& 19th {{ICE Conference}}}, - author = {Skiba, Nathalie and Morel, Laure and Guidat, Claudine and Camargo, Mauricio}, - year = {2013}, - address = {{The Hague, The Nederlands}}, - keywords = {continuity,dimension,empowerment,living,realism,spontaneity} -} - -@phdthesis{Skiba2014a, - title = {Processus d'innovation Centr\'ee Utilisateur: Identification Des Besoins et Interpr\'etation Des Donn\'ees Issues de l'int\'egration Des Utilisateurs Au Processus de Conception}, - author = {Skiba, Nathalie}, - year = {2014}, - school = {Universit\'e de Lorraine} -} - -@techreport{Skibaa, - title = {Modeling of a Living Lab Approach}, - author = {Skiba, Nathalie and Morel, Laure and Dupont, Laurent and Guidat, Claudine} -} - -@article{Skrinjaric2020, - title = {Empirical Assessment of the Circular Economy of Selected {{European}} Countries}, - author = {{\v S}krinjari{\'c}, Tihana}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {255}, - pages = {120246}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120246} -} - -@article{Slotwinski2014, - title = {Characterization of Metal Powders Used for Additive Manufacturing}, - author = {Slotwinski, J A and Garboczi, E J and Stutzman, P E and Ferraris, C F and Watson, S S and Peltz, M A}, - year = {2014}, - journal = {Journal of Research of the National Institute of Standards and Technology}, - volume = {119}, - pages = {460--493}, - issn = {2165-7254}, - doi = {10.6028/jres.119.018}, - abstract = {Additive manufacturing (AM) techniques1 can produce complex, high-value metal parts, with potential applications as critical parts, such as those found in aerospace components. The production of AM parts with consistent and predictable properties requires input materials (e.g., metal powders) with known and repeatable characteristics, which in turn requires standardized measurement methods for powder properties. First, based on our previous work, we assess the applicability of current standardized methods for powder characterization for metal AM powders. Then we present the results of systematic studies carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to structure and chemistry, including X-ray diffraction, energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, and X-Ray photoelectron spectroscopy were also employed. The results of these analyses show how virgin powder changes after being exposed to and recycled from one or more Direct Metal Laser Sintering (DMLS) additive manufacturing build cycles. In addition, these findings can give insight into the actual additive manufacturing process.}, - isbn = {1044677X}, - keywords = {3D printers,Characterization,Chemical analysis,Computerized tomography,Electron microscopy,Laser heating,Manufacture,Materials properties,Metal analysis,Metals,Particle size analysis,Photoelectrons,Photons,Powder metals,Powders,Recycling,Scanning electron microscopy,Sintering,Stainless steel,Tomography,X ray diffraction,X ray photoelectron spectroscopy}, - file = {/Users/fabio/Zotero/storage/FXVP85ST/Characterization of metal powders used for additive manufacturing.pdf} -} - -@inproceedings{Slotwinski2014a, - title = {Application of Physical and Chemical Characterization Techniques to Metallic Powders}, - booktitle = {{{AIP Conference Proceedings}}}, - author = {Slotwinski, J. A. and Watson, S. S. and Stutzman, P. E. and Ferraris, C. F. and Peltz, M. A. and Garboczi, E. J.}, - year = {2014}, - volume = {1581 33}, - pages = {1184--1190}, - issn = {15517616}, - doi = {10.1063/1.4864955}, - abstract = {Systematic studies have been carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. The characterization of these powders is important in NIST efforts to develop appropriate measurements and standards for additive materials and to document the property of powders used in a NIST-led additive manufacturing material round robin. An extensive array of characterization techniques was applied to these two powders, in both virgin and recycled states. The physical techniques included laser diffraction particle size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to chemistry, including X-ray diffraction and energy dispersive analytical X-ray analysis using the X-rays generated during scanning electron microscopy, were also employed. Results of these analyses will be used to shed light on the question: how does virgin powder change after being exposed to and recycled from one or more additive manufacturing build cycles? In addition, these findings can give insight into the actual additive manufacturing process. \textcopyright{} 2014 American Institute of Physics.}, - isbn = {978-0-7354-1211-8}, - keywords = {Metallic Powders,Physical and Chemical Characterization}, - file = {/Users/fabio/Zotero/storage/33SACPSP/Application of physical and chemical characterization techniques to metallic powders.pdf} -} - -@article{Slotwinski2014b, - title = {Physical and Chemical Characterization Techniques for Metallic Powders}, - author = {Slotwinski, J. A. and Stutzman, P. E. and Ferraris, C. F. and Watson, S. S. and Peltz, M. A. and Garboczi, E. J.}, - year = {2014}, - journal = {AIP Conference Proceedings}, - volume = {1581 33}, - pages = {1178--1183}, - issn = {15517616}, - doi = {10.1063/1.4864954}, - abstract = {Systematic studies have been carried out on two different powder materials used for additive manufacturing: stainless steel and cobalt-chrome. An extensive array of characterization techniques were applied to these two powders. The physical techniques included laser-diffraction particle-size analysis, X-ray computed tomography for size and shape analysis, and optical and scanning electron microscopy. Techniques sensitive to chemistry included X-ray diffraction and energy-dispersive analytical X-ray analysis. The background of these techniques will be summarized and some typical findings comparing different samples of virgin additive manufacturing powders, taken from the same lot, will be given. The techniques were used to confirm that different samples of powder from the same lot were essentially identical, within the uncertainty of the measurements. \textcopyright{} 2014 American Institute of Physics.}, - isbn = {9780735412118}, - keywords = {Metallic powders,Physical and chemical characterization}, - file = {/Users/fabio/Zotero/storage/B32RYH8G/Physical and chemical characterization techniques for metallic powders.pdf} -} - -@article{Slotwinski2015, - title = {Metrology {{Needs}} for {{Metal Additive Manufacturing Powders}}}, - author = {Slotwinski, John A. and Garboczi, Edward J.}, - year = {2015}, - month = mar, - journal = {JOM}, - volume = {67}, - number = {3}, - pages = {538--543}, - issn = {1047-4838}, - doi = {10.1007/s11837-014-1290-7}, - abstract = {Additive manufacturing (AM) processes can produce highly complex and customized parts without the need for dedicated tooling and can produce parts directly from the part design information. These types of processes are poised to revolutionize the manufacturing industry, yet several challenges are currently preventing more widespread adoption of AM technologies. Among these challenges are metrology issues associated with the measurement and characterization of the metal powders used for AM systems. This article will describe the technical challenges and needs for characterizing metal AM powders, recent research efforts to address those needs, and current work to standardize characterization methods in ASTM and ISO, such as the recently released ASTM F3049, Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes. \textcopyright{} 2015, The Minerals, Metals \& Materials Society (outside the U.S.).}, - isbn = {1047-4838}, - file = {/Users/fabio/Zotero/storage/YXWIX5RX/Metrology Needs for Metal Additive Manufacturing Powders.pdf} -} - -@article{Slotwinski2016, - title = {Analysis of {{Glass-Filled Nylon}} in {{Laser Powder Bed Fusion Additive Manufacturing}}}, - author = {Slotwinski, John and LaBarre, Erin and Forrest, Ryan and Crane, Emily}, - year = {2016}, - journal = {Jom}, - volume = {68}, - number = {3}, - pages = {811--821}, - issn = {1047-4838}, - doi = {10.1007/s11837-015-1792-y}, - file = {/Users/fabio/Zotero/storage/Z29Z9U4F/Analysis of Glass-Filled Nylon in Laser Powder Bed Fusion Additive Manufacturing.pdf} -} - -@article{Smederevac2020, - title = {Hereditary and Environmental Factors of the {{Five-Factor Model}} Traits: {{A}} Cross-Cultural Study}, - author = {Smederevac, Sne{\v z}ana and Mitrovi{\'c}, Du{\v s}anka and Sadikovi{\'c}, Selka and Riemann, Rainer and Bratko, Denis and Prinz, Mechthild and Budimlija, Zoran}, - year = {2020}, - month = aug, - journal = {Personality and Individual Differences}, - volume = {162}, - pages = {109995}, - publisher = {{Elsevier Ltd}}, - issn = {01918869}, - doi = {10.1016/j.paid.2020.109995}, - urldate = {2020-05-08}, - abstract = {This study examines cultural differences in genetic and environmental influences on Five-Factor Model (FFM) across Croatian, German and Serbian cultures. Participants were 1021 monozygotic and 722 dizygotic twin pairs and NEO Five-Factor Inventory\textendash{} NEO-FFI is used to assess FFM personality traits. Results show a similar pattern of genetic and environmental contribution to the variance of all FFM dimensions, indicating that culture has no significant effect on the genetic and environmental variance of personality traits. The best fitted common factor - common AE pathway models show that FFM dimensions are accounted for by the common latent factor. Although FFM dimensions clearly share some common sources of variance, the effects of specific genetic and environmental factors are more pronounced than common ones. Different patterns of genetic and environmental correlations across three samples may reflect the way that the synergy of personality traits responds to the specificities of a particular culture, as well as possible subtle differences in item translation, testing conditions, and measurement error.}, - keywords = {Behavioral genetic,Cross-cultural study,FFM,Hierarchical structure of personality} -} - -@article{Smith1978, - title = {Some {{Criteria}} for the {{Successful Commercial Recycling}} of {{Heterogeneous Plastics Wastes}}}, - author = {Smith, H Verity}, - year = {1978}, - volume = {2}, - number = {2}, - pages = {197--201}, - issn = {03613658}, - file = {/Users/fabio/Zotero/storage/WC78WENR/Some Criteria for the Successful Commercial Recycling of Heterogeneous Plastics Wastes.pdf} -} - -@article{Smith2013, - title = {Structural Characteristics of Fused Deposition Modeling Polycarbonate Material}, - author = {Smith, Walter Castro and Dean, Richard W.}, - year = {2013}, - month = dec, - journal = {Polymer Testing}, - volume = {32}, - number = {8}, - pages = {1306--1312}, - publisher = {{Elsevier Ltd}}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2013.07.014}, - urldate = {2014-07-15}, - file = {/Users/fabio/Zotero/storage/GJ5JU923/Smith, Dean - 2013 - Structural characteristics of fused deposition modeling polycarbonate material.pdf} -} - -@article{Smith2014, - title = {Bodystorming {{Mobile Learning}} Experiences}, - author = {Smith, Brian K}, - year = {2014}, - journal = {TechTrends}, - volume = {58}, - number = {1}, - pages = {6}, - issn = {01406736}, - doi = {10.1016/S0140-6736(02)07274-4}, - keywords = {bodystorming,design,mobile learning,research and development} -} - -@article{Smith2018, - title = {Microplastics in {{Seafood}} and the {{Implications}} for {{Human Health}}}, - author = {Smith, Madeleine and Love, David C. and Rochman, Chelsea M. and Neff, Roni A.}, - year = {2018}, - month = sep, - journal = {Current Environmental Health Reports}, - volume = {5}, - number = {3}, - pages = {375--386}, - issn = {2196-5412}, - doi = {10.1007/s40572-018-0206-z} -} - -@article{Smith2018a, - title = {Operationalising Ecosystem Service Assessment in {{Bayesian Belief Networks}}: {{Experiences}} within the {{OpenNESS}} Project}, - author = {Smith, Ron I. and Barton, David N. and Dick, Jan and {Haines-Young}, Roy and Madsen, Anders L. and Rusch, Graciela M. and Termansen, Mette and Woods, Helen and Carvalho, Laurence and Giuc{\u a}, Relu Constantin and Luque, Sandra and Odee, David and Rusch, Ver{\'o}nica and Saarikoski, Heli and Adamescu, Cristian Mihai and Dunford, Rob and Ochieng, John and {Gonzalez-Redin}, Julen and Stange, Erik and V{\u a}dineanu, Anghelut{\u a} and Verweij, Peter and Vikstr{\"o}m, Suvi}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {452--464}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.11.004}, - abstract = {Nine Bayesian Belief Networks (BBNs) were developed within the OpenNESS project specifically for modelling ecosystem services for case study applications. The novelty of the method, its ability to explore problems, to address uncertainty, and to facilitate stakeholder interaction in the process were all reasons for choosing BBNs. Most case studies had some local expertise on BBNs to assist them, and all used expert opinion as well as data to help develop the dependences in the BBNs. In terms of the decision scope of the work, all case studies were moving from explorative and informative uses towards decisive, but none were yet being used for decision-making. Three applications incorporated BBNs with GIS where the spatial component of the management was critical, but several concerns about estimating uncertainty with spatial modelling approaches are discussed. The tool proved to be very flexible and, particularly with its web interface, was an asset when working with stakeholders to facilitate exploration of outcomes, knowledge elicitation and social learning. BBNs were rated as very useful and widely applicable by the case studies that used them, but further improvements in software and more training were also deemed necessary.}, - keywords = {Decision scope,Spatial modelling,Stakeholder participation,Uncertainty,Web interface}, - file = {/Users/fabio/Zotero/storage/GZB9HWJX/Operationalising-ecosystem-service-assessment-in-Bayesian-Bel_2018_Ecosystem.pdf} -} - -@article{smithChemicalElementSustainability2020, - title = {A {{Chemical Element Sustainability Index}}}, - author = {Smith, Lucy and {Ibn-Mohammed}, Taofeeq and Reaney, Ian M. and Koh, S. C. Lenny}, - year = {2020}, - month = dec, - journal = {Resources, Conservation and Recycling}, - pages = {105317}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105317}, - urldate = {2020-12-21}, - file = {/Users/fabio/Zotero/storage/G78EB8JW/full-text.pdf} -} - -@article{smithFuturesQuestMeaning2021, - title = {Futures Is a {{Quest}} for {{Meaning}}: {{Richard Slaughter}}'s {{Contribution}} to {{Futures Education}}}, - author = {Smith, Caroline}, - year = {2021}, - month = jun, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102791}, - urldate = {2021-06-24} -} - -@article{smithGovernanceSustainableSociotechnical2005, - title = {The Governance of Sustainable Socio-Technical Transitions}, - author = {Smith, Adrian and Stirling, Andy and Berkhout, Frans}, - year = {2005}, - month = dec, - journal = {Research Policy}, - volume = {34}, - number = {10}, - pages = {1491--1510}, - issn = {00487333}, - doi = {10.1016/j.respol.2005.07.005}, - urldate = {2022-03-13}, - abstract = {A quasi-evolutionary model of socio-technical transitions is described in which regimes face selection pressures continuously. Differentiated transition contexts determine the form and direction of regime change in response to these pressures. The articulation of pressures, and the degree to which responses are coordinated and based on resources available within the regime, define the transition context. Four alternative contexts are described: endogenous renewal; re-orientation of trajectories; emergent transformation and purposive transitions. Agency and power in the governance of regime transformation are analysed. Power to affect change depends on regime membership, the distribution of resources for change and expectations. \textcopyright{} 2005 Elsevier B.V. All rights reserved.}, - keywords = {Governance,Power,Socio-technical regimes,Sustainable development,Transition management} -} - -@article{smithIntentionalDegrowthIts2021, - title = {Intentional Degrowth and Its Unintended Consequences: {{Uneven}} Journeys towards Post-Growth Transformations}, - author = {Smith, Thomas S.J. and Baranowski, Mariusz and Schmid, Benedikt}, - year = {2021}, - month = dec, - journal = {Ecological Economics}, - volume = {190}, - pages = {107215}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107215}, - urldate = {2021-09-15} -} - -@article{Sneddon2006, - title = {Sustainable Development in a Post-{{Brundtland}} World}, - author = {Sneddon, Chris and Howarth, Richard B. and Norgaard, Richard B.}, - year = {2006}, - journal = {Ecological Economics}, - volume = {57}, - number = {2}, - pages = {253--268}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2005.04.013}, - abstract = {Not yet two decades after the publication of Our Common Future, the world's political and environmental landscape has changed significantly. Nonetheless, we argue that the concept and practice of sustainable development (SD)-as guiding institutional principle, as concrete policy goal, and as focus of political struggle-remains salient in confronting the multiple challenges of this new global order. Yet how SD is conceptualized and practiced hinges crucially on: the willingness of scholars and practitioners to embrace a plurality of epistemological and normative perspectives on sustainability; the multiple interpretations and practices associated with the evolving concept of "development"; and efforts to open up a continuum of local-to-global public spaces to debate and enact a politics of sustainability. Embracing pluralism provides a way out of the ideological and epistemological straightjackets that deter more cohesive and politically effective interpretations of SD. Using pluralism as a starting point for the analysis and normative construction of sustainable development, we pay particular attention to how an amalgam of ideas from recent work in ecological economics, political ecology and the "development as freedom" literature might advance the SD debate beyond its post-Brundtland quagmire. Enhanced levels of ecological degradation, vast inequalities in economic opportunities both within and across societies, and a fractured set of institutional arrangements for global environmental governance all represent seemingly insurmountable obstacles to a move towards sustainability. While these obstacles are significant, we suggest how they might be overcome through a reinvigorated set of notions and practices associated with sustainable development, one that explicitly examines the linkages between sustainability policies and sustainability politics. ?? 2005 Elsevier B.V. All rights reserved.}, - isbn = {0921-8009}, - keywords = {Brundtland Report,Deliberative democracy,Environmental governance,Pluralism,Political ecology,Sustainable development}, - file = {/Users/fabio/Zotero/storage/28HLPPMK/Sustainable development in a post-Brundtland world.pdf} -} - -@article{Snow2011, - title = {Organizing Continuous Product Development and Commercialization: {{The}} Collaborative Community of Firms Model}, - author = {Snow, Charles C. and Fjeldstad, {\O}ystein D. and Lettl, Christopher and Miles, Raymond E.}, - year = {2011}, - month = jan, - volume = {28}, - number = {1}, - pages = {3--16}, - issn = {07376782}, - doi = {10.1111/j.1540-5885.2010.00777.x} -} - -@book{Soares2013, - title = {Design and Analysis of {{Experiments}}}, - author = {Soares, Anna Paula}, - year = {2013}, - journal = {Journal of Chemical Information and Modeling}, - volume = {53}, - eprint = {1011.1669v3}, - issn = {1098-6596}, - abstract = {Predicting the binding mode of flexible polypeptides to proteins is an important task that falls outside the domain of applicability of most small molecule and protein-protein docking tools. Here, we test the small molecule flexible ligand docking program Glide on a set of 19 non-{$\alpha$}-helical peptides and systematically improve pose prediction accuracy by enhancing Glide sampling for flexible polypeptides. In addition, scoring of the poses was improved by post-processing with physics-based implicit solvent MM- GBSA calculations. Using the best RMSD among the top 10 scoring poses as a metric, the success rate (RMSD {$\leq$} 2.0 \AA{} for the interface backbone atoms) increased from 21\% with default Glide SP settings to 58\% with the enhanced peptide sampling and scoring protocol in the case of redocking to the native protein structure. This approaches the accuracy of the recently developed Rosetta FlexPepDock method (63\% success for these 19 peptides) while being over 100 times faster. Cross-docking was performed for a subset of cases where an unbound receptor structure was available, and in that case, 40\% of peptides were docked successfully. We analyze the results and find that the optimized polypeptide protocol is most accurate for extended peptides of limited size and number of formal charges, defining a domain of applicability for this approach.}, - archiveprefix = {arxiv}, - isbn = {978-85-7811-079-6}, - pmid = {25246403}, - keywords = {icle}, - file = {/Users/fabio/Zotero/storage/QZJJSNAC/Douglas C. Montgomery - Design and Analysis of Experiments-John Wiley & Sons (2017) (1).pdf} -} - -@article{Sodergard2002, - title = {Properties of Lactic Acid Based Polymers and Their Correlation with Composition}, - author = {S{\"o}derg{\aa}rd, Anders and Stolt, Mikael}, - year = {2002}, - month = jul, - journal = {Progress in Polymer Science}, - volume = {27}, - number = {6}, - pages = {1123--1163}, - issn = {00796700}, - doi = {10.1016/S0079-6700(02)00012-6}, - urldate = {2015-03-03}, - keywords = {aliphatic polyesters,copolyesters,l -lactide,lactic acid based polymers,pdlla,poly,polycondensation,polylactic acid,ring-opening polymerization}, - file = {/Users/fabio/Zotero/storage/RZETWCV7/Södergård, Stolt - 2002 - Properties of lactic acid based polymers and their correlation with composition.pdf} -} - -@article{Sodhro2019, - title = {Towards an Optimal Resource Management for {{IoT}} Based {{Green}} and Sustainable Smart Cities}, - author = {Sodhro, Ali Hassan and Pirbhulal, Sandeep and Luo, Zongwei and {de Albuquerque}, Victor Hugo C.}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {1167--1179}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.01.188} -} - -@article{Sodiq2019, - title = {Towards Modern Sustainable Cities: {{Review}} of Sustainability Principles and Trends}, - author = {Sodiq, Ahmed and Baloch, Ahmer A.B. and Khan, Shoukat Alim and Sezer, Nurettin and Mahmoud, Seif and Jama, Mohamoud and Abdelaal, Ali}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {227}, - pages = {972--1001}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.106}, - urldate = {2020-05-21}, - abstract = {Human capital development, attractions of sustainable living standards and renewed concerns for the planet have redirected city planners to a new frontier: the creation of sustainable cities. This is evident in some initiatives taken to create cities with low to zero carbon emissions, build sustainable structures and create higher institutions of learning where sustainability practices are entrenched in their curricula. Examples of the forerunners of sustainable cities are abound; from the Middle East (Education City in Qatar and Masdar City in Abu Dhabi) to Far East (Dongtan Institute in China and New Songdo City in South Korea), new cities imbued with sustainability practices are springing forth. There are 400 big cities and 23 mega cities presently occupying the world urban spaces, with estimates of about one and 10 million inhabitants, respectively. Ironically cities occupy about 2\% of the earth surface, they however consume 60\textendash 80\% of global energy. The global urban population rose from 220 million to about 2.8 billion in the 20th century, and it is projected that by 2050, this will increase to 6.9 billion, which is about 70\% of the world population. Therefore, sustainability campaigns, when directed at cities, would have intended impacts due to a number of factors associated with cities: large population, hub of intellectual and social integration, high consumption, etc. In creating modern sustainable cities however, the attention of cities' planners and policymakers alike should be on those goals that come under the banner of sustainability, especially when designing new or retrofitting existing human settlements (the cities); such as human capital development, energy conservation and energy efficiency, water security, efficient use of earth-abundant resources, transportation, building standards, social and economic equity, and food wastes management. Although there are few review articles in the literature that separately deal with individual sustainability fundamentals, there is a dearth of publication consolidating key sustainability principles required for modern cities. This paper reviewed each element needed to make a functional sustainable city. We adopted a simple approach; we explained each sustainability principle, highlighted its core values and gave reasons why it is an important candidate to be considered in making a working city. We critiqued the current sustainable cities by stating reasons for their strengths and explanations for their deficiencies. We engaged the future sustainable cities' planners to learn from the failures of some of the earlier hurriedly executed sustainable cities in order to have the most important elements of sustainability present in their future project execution.}, - keywords = {Circular economy,Human capital development,Smart city,Sustainability,Sustainable city,Zero waste,Zero-emission} -} - -@article{Sokolov2019, - title = {Scenario-Based Identification of Key Factors for Smart Cities Development Policies}, - author = {Sokolov, Alexander and Veselitskaya, Natalia and Carabias, Vicente and Yildirim, Onur}, - year = {2019}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {148}, - pages = {119729}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119729} -} - -@article{Solangi2019, - title = {Evaluating the Strategies for Sustainable Energy Planning in {{Pakistan}}: {{An}} Integrated {{SWOT-AHP}} and {{Fuzzy-TOPSIS}} Approach}, - author = {Solangi, Yasir Ahmed and Tan, Qingmei and Mirjat, Nayyar Hussain and Ali, Sharafat}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117655}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117655}, - urldate = {2020-05-21}, - abstract = {This study proposes an integrated methodology based on Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis, Analytic Hierarchy Process (AHP), and Fuzzy Technique for Order Performance by Similarity to Ideal Solution (F-TOPSIS) to evaluate energy strategies for sustainable energy planning. The SWOT analysis is employed to determine the factors and sub-factors essential for sustainable energy planning. Subsequently, AHP, a Multi-Criteria Decision Making (MCDM) method is used to determine the weights of each factor and sub-factor. Finally, F-TOPSIS method is used to rank the 13 energy strategies under the case study for Pakistan's to achieve sustainable energy planning. The results of the study reveal that providing low-cost and sustainable electricity to residential, commercial, and industrial sectors (WO5) is highly prioritized energy strategy. While the utilization of coal resources and transformations of same into electricity (WO2) is prioritized as least favored energy strategy. The sensitivity analysis of the results validates the robustness of the study. This study, as such, proposes a systematic approach to develop and evaluate energy strategies for the sustainable energy planning and policy endeavor of Pakistan.}, - keywords = {AHP,Fuzzy TOPSIS,Pakistan,Strategies,Sustainable energy planning,SWOT analysis} -} - -@article{Solis2020, - ids = {solis2020}, - title = {Technologies for Chemical Recycling of Household Plastics \textendash{} {{A}} Technical Review and {{TRL}} Assessment}, - author = {Solis, Martyna and Silveira, Semida}, - year = {2020}, - month = mar, - journal = {Waste Management}, - volume = {105}, - pages = {128--138}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.01.038}, - keywords = {Chemical recycling,Circular economy,Plastic packaging,Plastic waste,Recycling,Recycling rates}, - file = {/Users/fabio/Zotero/storage/T4Z7VB6I/Solis_Silveira_2020_Technologies for chemical recycling of household plastics – A technical review.pdf;/Users/fabio/Zotero/storage/U2FE25TH/S0956053X20300465.html} -} - -@article{Somplak2019, - title = {Pricing and Advertising Strategies in Conceptual Waste Management Planning}, - author = {{\v S}ompl{\'a}k, Radovan and K{\r{u}}dela, Jakub and Smejkalov{\'a}, Veronika and Nevrl{\'y}, Vlastim{\'i}r and Pavlas, Martin and Hrabec, Du{\v s}an}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118068}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118068} -} - -@article{Son2019, - title = {Developing Scenario-Based Technology Roadmap in the Big Data Era: An Utilisation of Fuzzy Cognitive Map and Text Mining Techniques}, - author = {Son, Changho and Kim, Jieun and Kim, Youngjun}, - year = {2019}, - month = sep, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--20}, - issn = {0953-7325}, - doi = {10.1080/09537325.2019.1654091} -} - -@article{sonegoRepairElectronicProducts2022, - title = {Repair of Electronic Products: {{Consumer}} Practices and Institutional Initiatives}, - author = {Sonego, Monique and Echeveste, M{\'a}rcia Elisa Soares and Debarba, Henrique Galvan}, - year = {2022}, - month = mar, - journal = {Sustainable Production and Consumption}, - volume = {30}, - pages = {556--565}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2021.12.031}, - urldate = {2022-01-25} -} - -@article{sonettiConceptualizationSustainabilityStudents2021, - title = {Conceptualization of Sustainability among Students, Administrative and Teaching Staff of a University Community: {{An}} Exploratory Study in {{Italy}}}, - author = {Sonetti, G. and Sarrica, M. and Norton, L.S.}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {316}, - pages = {128292}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128292}, - urldate = {2021-07-20} -} - -@article{Song1972, - title = {The {{Limits}} to {{Growth}}.}, - author = {Song, Charles C.S.}, - year = {1972}, - journal = {Journal of the American Water Resources Association}, - volume = {8}, - number = {4}, - pages = {837--837}, - issn = {1093-474X}, - doi = {10.1111/j.1752-1688.1972.tb05230.x}, - abstract = {In 1972, three scientists from MIT created a computer model that analyzed global resource consumption and production. Their results shocked the world and created stirring conversation about global 'overshoot,' or resource use beyond the carrying capacity of the planet. Now, preeminent environmental scientists Donnella Meadows, Jorgen Randers, and Dennis Meadows have teamed up again to update and expand their original findings in The Limits to Growth: The 30 Year Update. Meadows, Randers, and Meadows are international environmental leaders recognized for their groundbreaking research into early signs of wear on the planet. Citing climate change as the most tangible example of our current overshoot, the scientists now provide us with an updated scenario and a plan to reduce our needs to meet the carrying capacity of the planet. Over the past three decades, population growth and global warming have forged on with a striking semblance to the scenarios laid out by the World3 computer model in the original Limits to Growth. While Meadows, Randers, and Meadows do not make a practice of predicting future environmental degradation, they offer an analysis of present and future trends in resource use, and assess a variety of possible outcomes. In many ways, the message contained in Limits to Growth: The 30-Year Update is a warning. Overshoot cannot be sustained without collapse. But, as the authors are careful to point out, there is reason to believe that humanity can still reverse some of its damage to Earth if it takes appropriate measures to reduce inefficiency and waste. Written in refreshingly accessible prose, Limits to Growth: The 30-Year Update is a long anticipated revival of some of the original voices in the growing chorus of sustainability. Limits to Growth: The 30 Year Update is a work of stunning intelligence that will expose for humanity the hazy but critical line between human growth and human development.}, - isbn = {0876631650}, - pmid = {307838}, - file = {/Users/fabio/Zotero/storage/B4865TUB/The Limits to Growth.pdf} -} - -@article{SongKo2019, - title = {Improving the Filament Weld-Strength of Fused Filament Fabrication Products through Improved Interdiffusion}, - author = {Ko, Yee Song and Herrmann, Denis and Tolar, Oliver and Elspass, Wilfried J. and Br{\"a}ndli, Christof}, - year = {2019}, - month = oct, - journal = {Additive Manufacturing}, - volume = {29}, - number = {March}, - pages = {100815}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100815}, - abstract = {Fused Filament Fabrication (FFF) is a popular additive manufacturing technique where molten polymer filament is applied in a raster pattern, layer by layer, to obtain the work piece. A necessary consequence of this method is a pronounced mechanical anisotropy of the product; the interface between the filaments is weaker compared to the filament itself. The strength of this interface is governed by the reptation theory which postulates a more efficient interpenetration of polymeric surfaces with decreasing polymer viscosity. This relationship was utilized in this work to modify a polycarbonate-acrylonitrile butadiene styrene polymer blend to produce FFF work pieces with less mechanical anisotropy, independent of printer settings. The tensile strength ratio of the printed interface to bulk tensile strength could be increased from 41\% to 95\%. Though the absolute bulk tensile strength decreases slightly, this method presents an easy and effective way to address the mechanical problems inherent in the FFF-method.}, - keywords = {fused filament fabrication,Fused Filament Fabrication,Interfacial adhesion,PC-ABS,Plasticizer,Welding time}, - file = {/Users/fabio/Zotero/storage/93QBDVSJ/Improving the filament weld-strength of fused filament fabrication products through improved interdiffusion.pdf} -} - -@article{soniTechnologicalInterventionsSocial2021, - title = {Technological Interventions in Social Business: {{Mapping}} Current Research and Establishing Future Research Agenda}, - author = {Soni, Gunjan and Mangla, Sachin Kumar and Singh, Pallavi and Dey, Bidit L. and Dora, Manoj}, - year = {2021}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {169}, - pages = {120818}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120818}, - urldate = {2021-05-03} -} - -@article{Sood2009, - title = {Improving Dimensional Accuracy of {{Fused Deposition Modelling}} Processed Part Using Grey {{Taguchi}} Method}, - author = {Sood, Anoop Kumar and Ohdar, R.K. and Mahapatra, S.S.}, - year = {2009}, - month = dec, - journal = {Materials \& Design}, - volume = {30}, - number = {10}, - pages = {4243--4252}, - publisher = {{Elsevier Ltd}}, - issn = {02613069}, - doi = {10.1016/j.matdes.2009.04.030}, - urldate = {2013-03-08}, - keywords = {absp400,acrylonitrile-butadine-styrene,dimensional accuracy,fdm,fused deposition modelling}, - file = {/Users/fabio/Zotero/storage/FIKTHVXH/Sood, Ohdar, Mahapatra - 2009 - Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method.pdf} -} - -@article{Sood2010, - title = {Parametric Appraisal of Mechanical Property of Fused Deposition Modelling Processed Parts}, - author = {Sood, Anoop Kumar and Ohdar, R.K. and Mahapatra, S.S.}, - year = {2010}, - month = jan, - journal = {Materials \& Design}, - volume = {31}, - number = {1}, - pages = {287--295}, - publisher = {{Elsevier Ltd}}, - issn = {02613069}, - doi = {10.1016/j.matdes.2009.06.016}, - urldate = {2013-03-10}, - keywords = {fused deposition modelling}, - file = {/Users/fabio/Zotero/storage/9KYTIBWC/Sood, Ohdar, Mahapatra - 2010 - Parametric appraisal of mechanical property of fused deposition modelling processed parts.pdf} -} - -@article{Sood2012, - title = {Experimental Investigation and Empirical Modelling of {{FDM}} Process for Compressive Strength Improvement}, - author = {Sood, Anoop K. and Ohdar, Raj K. and Mahapatra, Siba S.}, - year = {2012}, - month = jan, - journal = {Journal of Advanced Research}, - volume = {3}, - number = {1}, - pages = {81--90}, - publisher = {{Cairo University}}, - issn = {20901232}, - doi = {10.1016/j.jare.2011.05.001}, - urldate = {2013-03-24}, - file = {/Users/fabio/Zotero/storage/8DZYYCJU/Sood, Ohdar, Mahapatra - 2012 - Experimental investigation and empirical modelling of FDM process for compressive strength improvement.pdf} -} - -@article{soomroPrintedCircuitBoard2022, - title = {Printed {{Circuit Board}} Identification Using {{Deep Convolutional Neural Networks}} to Facilitate Recycling}, - author = {Soomro, Iftikhar A. and Ahmad, Anser and Raza, Rana H.}, - year = {2022}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {177}, - pages = {105963}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105963}, - urldate = {2021-11-07} -} - -@article{Soriano2014, - title = {Study and Improvement of Surgical Drill Bit Geometry for Implant Site Preparation}, - author = {Soriano, Josu and Garay, Ainhara and Aristimu{\~n}o, Patxi and Arrazola, Pedro J.}, - year = {2014}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {74}, - number = {5-8}, - pages = {615--627}, - issn = {14333015}, - doi = {10.1007/s00170-014-5998-x}, - abstract = {? 2014, Springer-Verlag London.During surgical interventions where bone machining operations are involved (drilling, sawing, etc.), bone tissue may be damaged by the mechanical and thermal loads, and thus, working conditions should be selected in order to reduce or avoid this problem. In this study, with the purpose of reducing the damage induced when drilling, an analysis and improvement of the geometry of a surgical drill bit had been done. As baseline, a commercially available stainless steel surgical drill indicated for implant site preparation had been considered. The influence of the rake angle, margin width, and body thinning over the workpiece temperatures, cutting forces, and surface roughness has been determined by a sensitivity study. First, eight drill bits had been fabricated on hard metal and drilling tests on bovine femoral cortical bone were done. These tests showed that the rake angle is the most influential factor among the analyzed, both for temperatures and cutting efforts. The two drill designs which achieved the lowest workpiece temperatures, cutting forces, and surface roughness had been fabricated also in surgical stainless steel and tested at wider cutting condition range of cutting speed and feed rates. These two drill bits reduced workpiece temperatures about 50\%, feed force about 60\%, and cutting torque up to 50\%, while the surface roughness was improved significantly when compared with the commercial surgical drill bit at the same cutting conditions. Comparing stainless steel and hard metal drills, no appreciable effects of the tool material have been detected over the measured output variables. This study shows how remarkable improvements on the design of surgical drills could be achieved by defining the influence of the rake angle, margin width, and body thinning when drilling bone.}, - keywords = {Bone,Damage,Design,Drill,Surgical,Tool}, - file = {/Users/fabio/Zotero/storage/YIZ32ES4/Study and improvement of surgical drill bit geometry for implant site preparation.pdf} -} - -@article{Soroudi2013, - title = {Recycling of Bioplastics, Their Blends and Biocomposites: {{A}} Review}, - author = {Soroudi, Azadeh and Jakubowicz, Ignacy}, - year = {2013}, - month = oct, - journal = {European Polymer Journal}, - volume = {49}, - number = {10}, - pages = {2839--2858}, - publisher = {{Elsevier Ltd}}, - issn = {00143057}, - doi = {10.1016/j.eurpolymj.2013.07.025}, - urldate = {2014-06-05}, - file = {/Users/fabio/Zotero/storage/ER265PG5/Recycling of bioplastics, their blends and biocomposites A review.pdf} -} - -@article{sorriRevisitingIoTDefinitions2022, - title = {Revisiting {{IoT}} Definitions: {{A}} Framework towards Comprehensive Use}, - author = {Sorri, Krista and Mustafee, Navonil and Sepp{\"a}nen, Marko}, - year = {2022}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {179}, - pages = {121623}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2022.121623}, - urldate = {2022-04-11} -} - -@article{sossouAdditiveManufacturingOriented2018, - title = {An Additive Manufacturing Oriented Design Approach to Mechanical Assemblies}, - author = {Sossou, Germain and Demoly, Fr{\'e}d{\'e}ric and Montavon, Ghislain and Gomes, Samuel}, - year = {2018}, - journal = {Journal of Computational Design and Engineering}, - volume = {5}, - number = {1}, - pages = {3--18}, - publisher = {{Society for Computational Design and Engineering}}, - issn = {22885048}, - doi = {10.1016/j.jcde.2017.11.005}, - urldate = {2021-01-12}, - abstract = {Firstly introduced as a prototyping process, additive manufacturing (AM) is being more and more considered as a fully-edged manufacturing process. The number of AM processes, along with the range of processed materials are expanding. AM has made manufacturable shapes that were too difficult (or even impossible) to manufacture with conventional technologies. This has promoted a shift in engineering design, from conventional design for manufacturing and assembly to design for additive manufacturing (DFAM). Research efforts into the DFAM field have been mostly dedicated to part's design, which is actually a requirement for a better industrial adoption. This has given rise to topologically optimized and/or latticed designs. However, since AM is also capable of manufacturing fully functional assemblies requiring a few or no assembly operations, there is a need for DFAM methodologies tackling product's development more holistically, and which are, therefore, dedicated to assembly design. Considering all the manufacturing issues related to AM of assembly-free mechanisms and available post-processing capabilities, this paper proposes a top-down assembly design methodology for AM in a proactive manner. Such an approach, can be seen as the beginning of a shift from conventional design for assembly (DFA) to a new paradigm. From a product's concept and a selected AM technology, the approach first provides assistance in the definition of the product architecture so that both functionality and successful manufacturing (including post-processing) are ensured. Particularly, build-orientation and downstream processes' characteristics are taken into account early in the design process. Secondly, for the functional flow (energy, material, signal) to be appropriately conveyed by the right amount of matter, the methodology provides guidance into how the components can be designed in a minimalism fashion leveraging the shape complexity afforded by AM. A mechanical assembly as case study is presented to illustrate the DFAM methodology. It is found that clearances and material (be it raw unprocessed material or support structures) within them plays a pivotal role in a successful assembly's design to be additively manufactured. In addition, the methodology for components' design proves to be an efficient alternative to topology optimization. Though, the approach can be extended by considering a strategy for part consolidation and the possibility to manufacture the assemblies with more than one AM process. As regards components' design, considering anisotropy can also improved the approach.}, - keywords = {Assembly design,CAD,Design for additive manufacturing,Design methodologies}, - file = {/Users/fabio/Zotero/storage/FSTN6SIR/full-text.pdf} -} - -@book{SotoBruna2017, - title = {Hazte Cargo}, - author = {Soto Bruna, Waldo and Carrasco Ram{\'i}rez, Gabriela and Fern{\'a}ndez Silva, Camila}, - editor = {Peralta Vald{\'e}z, Davi and Fern{\'a}ndez Chirino, Cristi{\'a}n}, - year = {2017}, - month = jun, - edition = {1}, - pages = {1--96}, - publisher = {{Fundaci\'on Minera Escondida}}, - address = {{Santiago de Chile}}, - abstract = {Este libro es un regalo para todas las personas que est\'an intentando generar cambios en su entorno, en su comunidad y en el pa\'is. Es un regalo para cientos de personas que quieren contribuir a una mejor forma de habitar nuestro planeta. Es un regalo que brota de las historias de 26 personas que participaron en el concurso AntofaEmprende, iniciativa de la Fundaci\'on Minera Escondida y Creo Antofagasta, que busca fortalecer las ideas de cambio social de j\'ovenes en la Regi\'on de Antofagasta. En cierto modo, todos ellos fueron cocreadores de este libro, pues las experiencias que nos transmitieron a trav\'es de entrevistas en profundidad fueron incorporadas en la redacci\'on de este. Agradecemos profundamente su colaboraci\'on y su motivaci\'on por querer compartir su conocimiento. Gracias a su aporte, cada vez ser\'an m\'as los agentes de cambio que construir\'an la regi\'on y el pa\'is que so\~namos.} -} - -@article{soukiazisDeterminantsWasteGeneration2020, - title = {The Determinants of Waste Generation and Recycling Performance across the {{Portuguese}} Municipalities \textendash{} {{A}} Simultaneous Equation Approach}, - author = {Soukiazis, Elias and Proen{\c c}a, Sara}, - year = {2020}, - month = aug, - journal = {Waste Management}, - volume = {114}, - pages = {321--330}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.06.039}, - urldate = {2020-07-20} -} - -@article{Soutter2020, - title = {``{{Global}} Warming'' versus ``Climate Change'': {{A}} Replication on the Association between Political Self-Identification, Question Wording, and Environmental Beliefs}, - author = {Soutter, Alistair Raymond Bryce and M{\~o}ttus, Ren{\'e}}, - year = {2020}, - month = apr, - journal = {Journal of Environmental Psychology}, - pages = {101413}, - publisher = {{Academic Press}}, - issn = {15229610}, - doi = {10.1016/j.jenvp.2020.101413}, - urldate = {2020-04-16}, - abstract = {Climate change is one of the greatest threats to humanity and requires immediate action. Schuldt, Konrath, and Schwarz (2011) suggested that beliefs in environmental phenomena can be influenced by the terminology used to describe it: changing question wording from global warming to climate change resulted in a 6.3 percentage point increase in belief in environmental phenomena. This association was moderated by political self-identification, with Republicans being 16.2 percentage points more likely to believe in climate change than in global warming, with Democrats showing no difference. The potential for connotative meanings to shift over time and the sociopolitical changes since the original study, potential policy and environmental campaign implications, and an expansion of these findings to other countries, motivated an attempt to replicate this important finding. This pre-registered study repeated the original procedures in the United States of America and two other countries (United Kingdom and Australia; total N = 5,717). Although question wording no longer had a significant effect on beliefs in climate change/global warming, the association of political self-identification with beliefs in environmental phenomena replicated in all three countries, with Conservatives consistently believing less in climate change/global warming than Liberals. The potential impacts of temporal and methodological differences on the discrepancies between this study's and the original's findings are discussed.}, - keywords = {Belief,Climate change,Global warming,Political self-identification,Scepticism} -} - -@article{souzapiaoHowCircularEconomy2023, - title = {How Is the Circular Economy Embracing Social Inclusion?}, - author = {Souza Piao, Roberta and {de Vincenzi}, Ticiana Braga and {da Silva}, Ana Lucia Fernandes and {de Oliveira}, Maria Clara Chinen and {Vazquez-Brust}, Diego and Monteiro Carvalho, Marly}, - year = {2023}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {137340}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137340}, - urldate = {2023-05-01}, - abstract = {To fully contribute to sustainable development, circular economy has to devote more attention to social inclusion. This paper thoroughly analyzed the literature, answering the research question: how is circular economy embracing social inclusion? The research design applied quantitative and qualitative strategies. Bibliometric quantitative analysis with the aid of VosViewer, the RStudio software, and Bibliometrix Package were employed. An inductive content analysis was undertaken to analyze the themes of circular economy and social inclusion, applying NVivo software. The results brought out six clusters: (i) reverse logistics and recycling, (ii) circular economy and innovation, (iii) social innovation, (iv) sustainable supply chains, (v) bioeconomy, and (vi) closed-loop supply chain. Our findings showed that the circular strategies of reuse and reduce were the focus of the surveyed literature, while consumers and communities were the key stakeholders addressed. Recycling was directly linked to waste management and the inclusion of waste pickers in developing countries. As future research themes, it highlighted more theoretical and empirical research about community and consumer engagement in circular practices, besides the importance of entrepreneurship and social innovation to intensify circular practices embracing social inclusion.}, - langid = {english}, - keywords = {Informal,Literature review,Recycling,Social inclusion,Waste management,Waste pickers}, - file = {/Users/fabio/Zotero/storage/YCYNACFV/S0959652623014981.html} -} - -@article{Sozer2019, - title = {Energy Saving, Global Warming and Waste Recovery Potential of Retrofitting Process for a District}, - author = {S{\"o}zer, Hatice and S{\"o}zen, H{\"u}seyin}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117915}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117915} -} - -@misc{SpacetimeInformationAnalysis, - title = {Space-Time Information Analysis for Resource-Conscious Urban Planning and Design: {{A}} Stakeholder Based Identification of Urban Metabolism Data Gaps | {{Elsevier Enhanced Reader}}}, - shorttitle = {Space-Time Information Analysis for Resource-Conscious Urban Planning and Design}, - doi = {10.1016/j.resconrec.2016.08.026}, - urldate = {2022-10-18}, - howpublished = {https://reader.elsevier.com/reader/sd/pii/S0921344916302294?token=FB941B30CC5B5F0FCA2191E75E4632F82CD2FD14967D3ADAE100705154D0CEF5E3D0333D537CA9F45BC3552541ECBC10\&originRegion=eu-west-1\&originCreation=20221018180034}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/RXXRZJ3F/Space-time information analysis for resource-conscious urban planning and design.pdf;/Users/fabio/Zotero/storage/VMHCLYCJ/S0921344916302294.html} -} - -@article{Spears2016, - title = {In-Process Sensing in Selective Laser Melting ({{SLM}}) Additive Manufacturing}, - author = {Spears, Thomas G. and Gold, Scott A.}, - year = {2016}, - journal = {Integrating Materials and Manufacturing Innovation}, - volume = {5}, - number = {1}, - pages = {2}, - publisher = {{Integrating Materials and Manufacturing Innovation}}, - issn = {2193-9764}, - doi = {10.1186/s40192-016-0045-4}, - keywords = {additive manufacturing,am,control,direct,direct metal laser,dmlm,dmls,in-process sensing,melt pool monitoring,metal laser melting,powder bed,process,process monitoring,selective laser melting,{Selective laser melting (SLM),Additive manufacturi},selective laser sintering,sintering,slm,sls}, - file = {/Users/fabio/Zotero/storage/MAKHSTGD/In-process sensing in selective laser melting (SLM) additive manufacturing.pdf} -} - -@article{spekkinkRepairCafesPrecious2022, - title = {Repair {{Caf\'es}} and {{Precious Plastic}} as Translocal Networks for the Circular Economy}, - author = {Spekkink, Wouter and R{\"o}dl, Malte and Charter, Martin}, - year = {2022}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {380}, - pages = {135125}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.135125}, - urldate = {2022-12-12}, - abstract = {The literature on the circular economy is dominated by visions that either disregard the role of civil society in (transitions to) a circular economy or depict civil society actors merely as passive consumers. However, there are organized citizen initiatives that align with circular economy thinking and that envision a much more active role for civil society in (transitions to) the circular economy. This paper explores Repair Caf\'es and Precious Plastic as two examples of such initiatives based on exploratory questionnaire surveys conducted among the associated communities, supplemented with evidence from documents from the initiatives. Repair Caf\'es and Precious Plastic can be understood as translocal communities that strive toward creating a circular economy through, for example, local repairing and recycling of plastic waste. This article is the first to study translocal communities in the context of a circular economy. In theory, such communities can develop transformative potential to challenge, alter and/or replace dominant institutions. This requires them to develop a critical mass, a shared identity and a political voice. The study shows that networking (and thus the development of critical mass) occurs primarily in specific countries (in the case of Repair Caf\'es) and not necessarily community-wide (in the case of Precious Plastic). Evidence for a shared identity does exist in both communities, although more clearly in the case of Repair Caf\'es. The study does not provide evidence for an explicit political voice developing in either community, although in the case of Repair Caf\'es, the Repair Caf\'e International Foundation does take up lobbying activities. Thus, the ingredients for transformative potential in these communities are present only to a limited extent. This study contributes to the circular economy literature by showing how civil society actors can engage with (transitions to) the circular economy through organized citizen initiatives, a phenomenon that has thus far been largely neglected in the literature on circular economies. The study also adds to the limited pool of empirical knowledge on two rapidly growing citizen initiatives toward circular economies.}, - langid = {english}, - keywords = {Circular economy,Citizen-driven initiatives,Recycling,Repair,Translocal networks}, - file = {/Users/fabio/Zotero/storage/MVP5QZQK/Spekkink et al_2022_Repair Cafés and Precious Plastic as translocal networks for the circular.pdf;/Users/fabio/Zotero/storage/5VDAVRDF/S0959652622046996.html} -} - -@article{spencerTechnologyWorkLessons2023, - title = {Technology and Work: {{Past}} Lessons and Future Directions}, - shorttitle = {Technology and Work}, - author = {Spencer, David A.}, - year = {2023}, - month = aug, - journal = {Technology in Society}, - volume = {74}, - pages = {102294}, - issn = {0160-791X}, - doi = {10.1016/j.techsoc.2023.102294}, - urldate = {2023-07-03}, - abstract = {This paper addresses arguments that suggest life would be better if machines took the place of humans in work. These arguments are highly topical and remain central to modern debates on automation. Yet, as argued in this paper, they have a long history. They draw strength from different ideas including about the value of work and free time. These ideas also fit with broader agendas that address futures beyond capitalism. The paper uses a review of the history of ideas on possible automated futures to develop critical insights into the scope for using technology to work less and better in the future. A key conclusion \textendash{} again developing ideas from the past \textendash{} is that automation should promote opportunities for well-being in work as well as beyond it. This conclusion helps to support a politics of automation aimed at securing greater democracy in the development and use of technology in society.}, - langid = {english}, - keywords = {Automation,Capitalism,Leisure,Post-work futures,Work quality,Work time}, - file = {/Users/fabio/Zotero/storage/N2BVY5HK/Spencer - 2023 - Technology and work Past lessons and future direc.pdf;/Users/fabio/Zotero/storage/HKEBKI3G/S0160791X23000994.html} -} - -@article{Sperling2006, - title = {Introduction to {{Physical Polymer Science}}}, - author = {Stamm, Manfred}, - year = {2006}, - month = apr, - journal = {Macromolecular Chemistry and Physics}, - volume = {207}, - number = {8}, - pages = {787--787}, - issn = {1022-1352}, - doi = {10.1002/macp.200600086}, - isbn = {047170606X}, - file = {/Users/fabio/Zotero/storage/KZ7QMH69/Introduction to Physical Polymer Science.pdf} -} - -@article{Spiliotis2019, - title = {Are Forecasting Competitions Data Representative of the Reality?}, - author = {Spiliotis, Evangelos and Kouloumos, Andreas and Assimakopoulos, Vassilios and Makridakis, Spyros}, - year = {2019}, - journal = {International Journal of Forecasting}, - number = {xxxx}, - publisher = {{Elsevier B.V.}}, - issn = {01692070}, - doi = {10.1016/j.ijforecast.2018.12.007}, - keywords = {forecasting competitions,time series features,time series visualization}, - file = {/Users/fabio/Zotero/storage/DFAMRNUS/Are forecasting competitions data representative of the reality.pdf} -} - -@article{spreaficoCanTRIZTheory2022, - title = {Can {{TRIZ}} ({{Theory}} of {{Inventive Problem Solving}}) Strategies Improve Material Substitution in Eco-Design?}, - author = {Spreafico, Christian}, - year = {2022}, - month = jan, - journal = {Sustainable Production and Consumption}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.01.010}, - urldate = {2022-01-25} -} - -@article{spreaficoInvestigatingStudentsEcomisperceptions2022, - title = {Investigating Students' Eco-Misperceptions in Applying Eco-Design Methods}, - author = {Spreafico, Christian and Landi, Daniele}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {342}, - pages = {130866}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130866}, - urldate = {2022-03-08}, - abstract = {This study collects and discusses the misperceptions about eco-design, renamed eco-misperception, emerged from a group of students while applying common eco-design methods. We define eco-misperceptions as erroneous interpretations of the novice eco-designers, about the environmental sustainability of design solutions, according to more experienced eco-designers. They are detectable by qualitatively or quantitatively analysing how the novice eco-designers present the proposed or identified design solutions. To obtain the eco-misperceptions, the end-of-year projects and the interviews of 61 students attending the master's degree in mechanical and management engineering from two Italian universities were considered. These projects concern the reduction of the environmental impacts of three real industrial products, supported by existing eco-design methods. The systematic analysis of the proposed solutions showed that students committed different eco-misperceptions, not related to the comprehension of eco-design but to its practical application and involving different aspects: the psychological inertia leading to address a given problem in a habitual way, the selection of the not appropriate examples to inspire, a limited consideration regarding the life cycle of the product, the difficulty in selecting the appropriate level of detail during eco-design and eco-assessment, and the difficulty in dealing with problems presented in a descriptive way rather than through a precise mathematical formulation. Unlike other contributions in the literature, in this study the collected eco-misperception are in greater number, more heterogeneous, more detailed in definition and contextualised through examples that can be used to improve eco-design courses.}, - keywords = {Eco-design,Eco-knowledge,Eco-misperceptions,Teaching} -} - -@article{spreaficoNewMethodPatent2023, - title = {A New Method of Patent Analysis to Support Prospective Life Cycle Assessment of Eco-Design Solutions}, - author = {Spreafico, Christian and Landi, Daniele and Russo, Davide}, - year = {2023}, - month = jun, - journal = {Sustainable Production and Consumption}, - volume = {38}, - pages = {241--251}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.04.006}, - urldate = {2023-05-01}, - abstract = {Prospective life cycle assessment (LCA) was introduced with the goal to evaluate the environmental sustainability of eco-design solutions (i.e., ideas, prototypes, immature products, emerging technologies) prospectively rather than existing products, at the present time, as in traditional LCA. The main difference lies in the inventory, which is foreground and is based solely on the extraction of data from prospective documents, including patents, although this task, is tricky and can make the final result uncertain. This study proposes a systematic method to collect all the flows about a specific function of the product lifecycle from patent literature for building the foreground inventory of prospective LCA, ensuring comparability, data quality and scale-up. This was done by studying the intersections between patent analysis techniques and LCA requirements for reducing the uncertainty, prescribed by ISO 14040, ISO 14044, Pedigree Matrix and Data Quality Indicators for Life Cycle Inventory Data. The application of the proposed method to a case study related to the production of titanium powders using an innovative process revealed its main advantages in collecting patents and extracting data. Patent search recall and precision are increased. Patents are filtered by seeking a trade-off to ensure time consistency and avoid anomalous fluctuations in the data resulting from predatory patenting strategies. Data reliability and significance are controlled. Results can be expressed without levelling them around the average value, but adding time evolution and forecasting considerations. For example, the global warming potential (GWP) of the innovative process is 1.5~\% lower than the GWP of the current process, considering the average patent data of the last 10~years. In addition, this value showed a 1~\% increase for each year.}, - langid = {english}, - keywords = {Eco-design,Patents,Prospective LCA}, - file = {/Users/fabio/Zotero/storage/7E54NVWL/Spreafico et al_2023_A new method of patent analysis to support prospective life cycle assessment of.pdf;/Users/fabio/Zotero/storage/YICB9ECR/S2352550923000787.html} -} - -@article{spreaficoQuantifyingAdvantagesTRIZ2021, - title = {Quantifying the Advantages of {{TRIZ}} in Sustainability through Life Cycle Assessment}, - author = {Spreafico, Christian}, - year = {2021}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {303}, - pages = {126955}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126955}, - urldate = {2021-04-29} -} - -@article{springleComplexRoleSingleuse2022, - title = {The Complex Role of Single-Use Compostable Bioplastic Food Packaging and Foodservice Ware in a Circular Economy: {{Findings}} from a Social Innovation Lab}, - shorttitle = {The Complex Role of Single-Use Compostable Bioplastic Food Packaging and Foodservice Ware in a Circular Economy}, - author = {Springle, Nadia and Li, Belinda and Soma, Tammara and Shulman, Tamara}, - year = {2022}, - month = aug, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2022.08.006}, - urldate = {2022-08-10}, - abstract = {Compostable bioplastic food packaging and foodservice ware is gaining traction as an alternative to petroleum-based plastics and is being considered within institutional and corporate sustainability strategies. However, compostable bioplastics present their own complex challenges and limitations to sustainability across their lifecycle and may in some cases hinder sustainable waste management practices, and therefore the development of a circular economy. Applying a social innovation lab methodological approach, this research explored the challenges and opportunities of compostable bioplastic food packaging and foodservice ware in promoting sustainable production and consumption from a systems perspective. This study draws upon the findings from key informant interviews (n\,=\,28) and three social innovation workshops on ``seeing the system'' (n\,=\,27), ``designing solutions'' (n\,=\,23), and ``prototyping'' (n\,=\,22) with diverse stakeholders from across the food and packaging sector in Canada and some in the United States, as well as with policymakers across different levels of government. Results from the workshop and interviews identified regulatory and infrastructural issues as well as confusion because of the lack of clear standards in the country. Concerns were also raised around the source of compostable bioplastic feedstock, and whether single-use compostable bioplastic truly supported a circular food economy. The findings from this research brought forward recommendations for improving the sustainability and source of compostable bioplastic feedstocks; standards and regulations; explored waste management options such as extended producer responsibility; and addressed the need to focus on single-use item reduction more broadly, as a challenge to the dominant ``take, make, and dispose'' model.}, - langid = {english}, - keywords = {Circular economy,Compostable bioplastics,Food packaging,Plastic waste,Social innovation,Waste management}, - file = {/Users/fabio/Zotero/storage/G2TNIYME/Springle et al_2022_The complex role of single-use compostable bioplastic food packaging and.pdf;/Users/fabio/Zotero/storage/FU5I7EL5/S2352550922002123.html} -} - -@inproceedings{Sreenivasan2009, - title = {Sustainability Study in Selective Laser Sintering \textendash{} {{An}} Energy Perspective}, - booktitle = {Solid {{Freeform Fabrication Symposium}}}, - author = {Sreenivasan, Rameshwar and Bourell, David L}, - year = {2009}, - pages = {257--265}, - issn = {1079-7580}, - abstract = {This paper presents a sustainability analysis of Selective Laser Sintering (SLS) from an energy standpoint. Data of electrical power consumed by the system over an entire build were acquired using a LabVIEW 8.6 circuit. The power drawn by individual subsystems were also measured, and an energy balance was performed. These data were then used to arrive at a Total Energy Indicator of the process with the help of a specific type of Environmental and Resource Management Data (ERMD) known as Eco- Indicators, which indicates the level of sustainability of the process.}, - isbn = {978-1-61782-293-3}, - file = {/Users/fabio/Zotero/storage/YJ3D467U/Sreenivasan, Bourell - 2009 - Sustainability study in selective laser sintering – An energy perspective.pdf} -} - -@article{Sreenivasan2010, - title = {Sustainability Issues in Laser-Based Additive Manufacturing}, - author = {Sreenivasan, R. and Goel, A. and Bourell, D.L.}, - year = {2010}, - journal = {Physics Procedia}, - volume = {5}, - pages = {81--90}, - publisher = {{Elsevier}}, - issn = {18753892}, - doi = {10.1016/j.phpro.2010.08.124}, - urldate = {2016-08-31}, - file = {/Users/fabio/Zotero/storage/3ZEGCCHS/Sreenivasan, Goel, Bourell - 2010 - Sustainability issues in laser-based additive manufacturing.pdf} -} - -@article{sridharanAreMicroplasticsDestabilizing2021, - ids = {sridharan2021a}, - title = {Are Microplastics Destabilizing the Global Network of Terrestrial and Aquatic Ecosystem Services?}, - author = {Sridharan, Srinidhi and Kumar, Manish and Bolan, Nanthi S. and Singh, Lal and Kumar, Sunil and Kumar, Rakesh and You, Siming}, - year = {2021}, - month = jul, - journal = {Environmental Research}, - volume = {198}, - pages = {111243}, - publisher = {{Academic Press}}, - issn = {0013-9351}, - doi = {10.1016/J.ENVRES.2021.111243}, - urldate = {2022-01-13}, - abstract = {Plastic has created a new man-made ecosystem called plastisphere. The plastic pieces including microplastics (MPs) and nanoplastics (NPs) have emerged as a global concern due to their omnipresence in ecosystems and their ability to interact with the biological systems. Nevertheless, the long-term impacts of MPs on biotic and abiotic resources are not completely understood, and existing evidence suggests that MPs are hazardous to various keystones species of the global biomes. MP-contaminated ecosystems show reduced floral and faunal biomass, productivity, nitrogen cycling, oxygen-generation and carbon sequestration, suggesting that MPs have already started affecting ecological biomes. However, not much is known about the influence of MPs towards the ecosystem services (ESs) cascade and its correlation with the biodiversity loss. MPs are perceived as a menace to the global ecosystems, but their possible impacts on the provisional, regulatory, and socio-economic ESs have not been extensively studied. This review investigates not only the potentiality of MPs to perturb the functioning of terrestrial and aquatic biomes, but also the associated social, ecological and economic repercussions. The possible long-term fluxes in the ES network of terrestrial and aquatic niches are also discussed.}, - pmid = {33933493}, - keywords = {Biodiversity,Ecosystem services,Green/blue economy,Microplastics,Plastisphere}, - file = {/Users/fabio/Zotero/storage/SHJ8N3RC/Sridharan et al. - 2021 - Are microplastics destabilizing the global network.pdf;/Users/fabio/Zotero/storage/S7J2IBB9/S0013935121005375.html} -} - -@article{Sriraman2010, - title = {Bonding Characteristics during Very High Power Ultrasonic Additive Manufacturing of Copper}, - author = {Sriraman, M. R. and Babu, S. S. and Short, M.}, - year = {2010}, - journal = {Scripta Materialia}, - volume = {62}, - number = {8}, - pages = {560--563}, - publisher = {{Acta Materialia Inc.}}, - issn = {13596462}, - doi = {10.1016/j.scriptamat.2009.12.040}, - abstract = {Welding of copper foils (150 {$\mu$}m thick) achieved at room temperature by very high power ultrasonic additive manufacturing was seen to involve appreciable softening and enhanced plastic flow. The initial coarse-grained structure (25 {$\mu$}m) in the material changed into fine dynamically recrystallized grains (0.3-10 {$\mu$}m) at the foil interface within the order of a few milliseconds of processing. This phenomenon led to metallurgical bonding through grain boundary migration and allowed for successive welding of tapes to form a three-dimensional part. \textcopyright{} 2009 Acta Materialia Inc.}, - isbn = {1359-6462}, - keywords = {Copper,Dynamic recrystallization,Electron backscattering diffraction,Ultrasonic additive manufacturing,Welding}, - file = {/Users/fabio/Zotero/storage/HN7BPA92/Sriraman, Babu, Short - 2010 - Bonding characteristics during very high power ultrasonic additive manufacturing of copper.pdf} -} - -@article{Srisuwan2015, - title = {Physical {{Properties}} of {{Poly}}(Lactic Acid)/{{Hydroxyl Terminated Natural Rubber Blends}}}, - author = {Srisuwan, Sawitri and Ruksakulpiwat, Yupaporn and Chumsamrong, Pranee}, - year = {2015}, - journal = {Macromolecular Symposia}, - volume = {354}, - number = {1}, - pages = {118--124}, - issn = {10221360}, - doi = {10.1002/masy.201400099}, - keywords = {htnr,hydroxyl terminated natural rubber,lactic acid,poly}, - file = {/Users/fabio/Zotero/storage/W44H9493/Srisuwan, Ruksakulpiwat, Chumsamrong - 2015 - Physical Properties of Poly(lactic acid)Hydroxyl Terminated Natural Rubber Blends.pdf} -} - -@article{Srithep2013, - title = {Effects of Annealing Time and Temperature on the Crystallinity and Heat Resistance Behavior of Injection-Molded Poly(Lactic Acid)}, - author = {Srithep, Yottha and Nealey, Paul and Turng, Lih-Sheng}, - year = {2013}, - month = mar, - journal = {Polymer Engineering \& Science}, - volume = {53}, - number = {3}, - pages = {580--588}, - issn = {00323888}, - doi = {10.1002/pen.23304}, - urldate = {2014-10-21}, - file = {/Users/fabio/Zotero/storage/AQMDHFX3/Srithep, Nealey, Turng - 2013 - Effects of annealing time and temperature on the crystallinity and heat resistance behavior of injection.pdf} -} - -@phdthesis{Staahlbrost2008a, - title = {Forming {{Future IT}} - {{The Living Lab Way}} of {{User Involvement}}}, - author = {Staahlbr{\"o}st, Anna}, - year = {2008}, - school = {Lule\aa University of Technology} -} - -@article{Stables2009, - title = {Educating for Environmental Sustainability and Educating for Creativity: Actively Compatible or Missed Opportunities?}, - author = {Stables, Kay}, - year = {2009}, - month = apr, - journal = {International Journal of Technology and Design Education}, - volume = {19}, - number = {2}, - pages = {199--219}, - issn = {0957-7572}, - doi = {10.1007/s10798-008-9077-1} -} - -@article{Stacey2015, - title = {An Open Ecosystem Engagement Strategy through the Lens of Global Food Safety}, - author = {Stacey, Paul and Fons, Garin and Bernardo, Theresa M}, - year = {2015}, - month = may, - journal = {F1000Research}, - volume = {4}, - pages = {129}, - issn = {2046-1402}, - doi = {10.12688/f1000research.6123.1}, - abstract = {The Global Food Safety Partnership (GFSP) is a public/private partnership established through the World Bank to improve food safety systems through a globally coordinated and locally-driven approach. This concept paper aims to establish a framework to help GFSP fully leverage the potential of open models.} -} - -@article{Stahl2019, - title = {Ethics in Corporate Research and Development: Can Responsible Research and Innovation Approaches Aid Sustainability?}, - author = {Stahl, Bernd Carsten and Chatfield, Kate and Ten Holter, Carolyn and Brem, Alexander}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118044}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118044}, - urldate = {2020-05-21}, - abstract = {An increase in the number of companies that publish corporate social responsibility (CSR) statements, and a rise in their `sustainability' research, reflects a growing acceptance that broad ethical considerations are key for any type of company. However, little is known about how companies consider moral objectives for their research and development (R\&D) activities, or the basis upon which these activities are chosen. This research involves qualitative investigation into Responsible Research and Innovation (RRI) in the Information and Communication Technology (ICT) industry, comprising 30 in-depth, pan-European interviews with key personnel in the industry, and focus groups with employees at 14 different companies. Through investigation of the `responsible' activities these companies currently undertake, we shed light on the types of moral goals they set and their underlying ethical standpoints. By reviewing both the responsible innovation and sustainability discourses, and presenting phenomenological evidence, we demonstrate that companies have adopted some aspects of RRI, even though it might not be recognised as such. Our findings indicate that these innovators recognise some of the ethical and societal concerns associated with their activities but their approach is often piecemeal; primary focus is upon the most immediate issues and on legal compliance, to the detriment of broader societal issues and wider challenges. We recommend explicit mechanisms that draw upon established ethical thought and practical academic work to improve companies' abilities to carry out their sustainability activities, and incorporate them into a responsible business strategy. We conclude with recommendations for innovators, corporate research and development, and policy.}, - keywords = {Ethics,ICT,Research and development,Responsible research and innovation,Sustainability} -} - -@article{stankoDisentanglingCollectiveMotivations2021, - title = {Disentangling the Collective Motivations for User Innovation in a {{3D}} Printing Community}, - author = {Stanko, Michael A. and Allen, B.J.}, - year = {2021}, - month = sep, - journal = {Technovation}, - pages = {102387}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2021.102387}, - urldate = {2021-09-15} -} - -@article{stankovicIntegratedApproachPCA2021, - title = {An Integrated Approach of {{PCA}} and {{PROMETHEE}} in Spatial Assessment of Circular Economy Indicators}, - author = {Stankovi{\'c}, Jelena J. and {Jankovi{\'c}-Mili{\'c}}, Vesna and Marjanovi{\'c}, Ivana and Janji{\'c}, Jasmina}, - year = {2021}, - month = jun, - journal = {Waste Management}, - volume = {128}, - pages = {154--166}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.04.057}, - urldate = {2021-05-17} -} - -@article{Stansbury2016, - title = {{{3D}} Printing with Polymers: {{Challenges}} among Expanding Options and Opportunities}, - author = {Stansbury, Jeffrey W. and Idacavage, Mike J.}, - year = {2016}, - month = jan, - journal = {Dental Materials}, - volume = {32}, - number = {1}, - pages = {54--64}, - publisher = {{The Academy of Dental Materials}}, - issn = {01095641}, - doi = {10.1016/j.dental.2015.09.018}, - abstract = {Objectives Additive manufacturing, which is more colloquially referred to as 3D printing, is quickly approaching mainstream adoption as a highly flexible processing technique that can be applied to plastic, metal, ceramic, concrete and other building materials. However, taking advantage of the tremendous versatility associated with in situ photopolymerization as well as the ability to select from a variety of preformed processible polymers, 3D printing predominantly targets the production of polymeric parts and models. The goal of this review is to connect the various additive manufacturing techniques with the monomeric and polymeric materials they use while highlighting emerging material-based developments. Methods Modern additive manufacturing technology was introduced approximately three decades ago but this review compiles recent peer-reviewed literature reports to demonstrate the evolution underway with respect to the various building techniques that differ significantly in approach as well as the new variations in polymer-based materials being employed. Results Recent growth of 3D printing has been dramatic and the ability of the various platform technologies to expand from rapid production prototypic models to the greater volume of readily customizable production of working parts is critical for continued high growth rates. This transition to working part production is highly dependent on adapting materials that deliver not only the requisite design accuracy but also the physical and mechanical properties necessary for the application. Significance With the weighty distinction of being called the next industrial revolution, 3D printing technologies is already altering many industrial and academic operations including changing models for future healthcare delivery in medicine and dentistry.}, - arxiv = {NIHMS150003}, - isbn = {0261-4189 (Print)\textbackslash r0261-4189 (Linking)}, - pmid = {26494268}, - keywords = {3D printing,Additive manufacturing,Dental materials,Layered materials,Photopolymer,Prepolymer,Rapid prototyping,Thermoplastic}, - file = {/Users/fabio/Zotero/storage/PGS5VTGG/3D printing with polymers- Challenges among expanding options and opportunities.pdf} -} - -@article{stantonDecisionMakingDeep2021, - title = {Decision Making under Deep Uncertainties: {{A}} Review of the Applicability of Methods in Practice}, - author = {Stanton, Muriel C. Bonjean and Roelich, Katy}, - year = {2021}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {171}, - pages = {120939}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120939}, - urldate = {2021-06-21}, - file = {/Users/fabio/Zotero/storage/GG3J6CZW/full-text.pdf} -} - -@article{Starr2011, - title = {The Effect of Process Conditions on Mechanical Properties of Laser Sintered Nylon}, - author = {Starr, Thomas L. and Gornet, Timothy J. and Usher, John S.}, - year = {2011}, - month = oct, - journal = {Rapid Prototyping Journal}, - volume = {17}, - number = {6}, - pages = {418--423}, - issn = {1355-2546}, - doi = {10.1108/13552541111184143}, - abstract = {Purpose - The purpose of this paper is to measure the effect of process conditions on mechanical properties of laser-sintered nylon 12 (DuraformUP/UP) and to determine the range of conditions that provide consistent mechanical performance for additive manufacturing. Design/methodology/approach - Tensile test specimens were fabricated over a range of well-characterized process conditions including laser power, laser speed, scan spacing, layer thickness, build orientation, and build position. Tensile modulus, yield strength, ultimate tensile strength and elongation-at-fracture were measured and related to process parameters. Findings - Tensile properties are strongly related to the amount of energy deposited during scanning. Strength and modulus approach their maximum values as the energy deposited exceeds the amount needed to fully melt the applied powder. Elongation-at-fracture does not reach its maximum until higher energy-melt ratio. Performance of blends with reused powder matches that of virgin powder when blend composition is adjusted to a standard melt-flow index. The volumetric energy density and the energy-melt ratio are useful for correlating mechanical properties with multiple process parameters and material thermal properties. Originality/value - This work presents the most extensive data to date on mechanical properties of nylon 12 (DuraformUP/UP) as they relate to the full range of process parameters. These data show that mechanical performance correlates strongly with the volume energy density. In contrast to the area energy density (a.k.a. Andrews Number), this volumetric parameter includes the effect of varying layer thickness and can be related directly to the melting characteristics of the polymer material. Within the parameter range studied, this relationship allows adjustment of one scan parameter for improved speed or dimensional accuracy while ensuring good strength by an offsetting adjustment of another parameter. Such trade-offs will be important in future manufacturing applications of the laser sintering process. Understanding the energy-melt ratio provides insight into the relationship between scan conditions and the physics of powder melting and sintering, and offers a methodology to relate results at other bed temperatures and with other polymer powders. \© 2011 Emerald Group Publishing Limited. All rights reserved.}, - isbn = {1355254111118}, - keywords = {lasers,mechanical properties of materials,nylon,paper type research paper,tensile strength}, - file = {/Users/fabio/Zotero/storage/DGN3HTXK/The effect of process conditions on mechanical properties of laser sintered nylon.pdf} -} - -@article{steeleManagingTechnicalInnovation2022, - title = {Managing Technical Innovation: {{A}} Systematic Review of 11 Leader Functions}, - author = {Steele, Logan M. and Watts, Logan L.}, - year = {2022}, - month = may, - journal = {Technovation}, - pages = {102539}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2022.102539}, - urldate = {2022-05-28} -} - -@article{Steenhuis2017, - title = {The Additive Manufacturing Innovation: {{A}} Range of Implications}, - author = {Steenhuis, Harm Jan and Pretorius, Leon}, - year = {2017}, - journal = {Journal of Manufacturing Technology Management}, - volume = {28}, - number = {1}, - pages = {122--143}, - issn = {1741038X}, - doi = {10.1108/JMTM-06-2016-0081}, - abstract = {Flexibility in manufacturing operations is becoming increasingly important to industrial firms, due to e.g., increasing market demand volatility and shorter product life cycles. Additive manufacturing technologies show great potential in adding flexibility to manufacturing operations through nearly unlimited freedom in product design, very high product mix flexibility, decentralized production and the ability to produce new product variants after a very short period of time. This could result in shorter lead times, lower stock levels, higher product availability and lower transportation costs. Therefore companies have to incorporate the increased flexibility in their decision, especially on the production network level, when they decide whether to use additive manufacturing or not. Current methods are not able to take into account all of these flexibility types and the respective benefits. The application of an appropriate method could lead to a realistic evaluation and an increased use of additive manufacturing technologies. This paper evaluates state of the art methods, especially from the field of strategic production network planning. The main contribution of this paper is the development of a framework for integration of additive manufacturing technologies in production networks using the Real Option value as target criteria. Finally, we discuss where further research is needed in order to develop an applicable method based on the presented framework.}, - keywords = {3D printing,Additive manufacturing,Competitiveness,Innovation,Manufacturing technology,Technological change}, - file = {/Users/fabio/Zotero/storage/LF5RECL3/The additive manufacturing innovation- a range of implications.pdf} -} - -@article{steenmansFosteringCircularEconomy2023, - title = {Fostering the Circular Economy through Private Law: {{Perspectives}} from the Extended Producer Responsibility Concept}, - shorttitle = {Fostering the Circular Economy through Private Law}, - author = {Steenmans, Katrien and Ulfbeck, Vibe}, - year = {2023}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {195}, - pages = {107016}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107016}, - urldate = {2023-05-10}, - langid = {english}, - keywords = {Circular economy,Extended producer responsibility,Private law,Product design,Public law}, - file = {/Users/fabio/Zotero/storage/PCRBYGZH/Steenmans y Ulfbeck - 2023 - Fostering the circular economy through private law.pdf;/Users/fabio/Zotero/storage/HF3HK7VP/S0921344923001520.html} -} - -@article{Stefaniak2022, - title = {Towards Sustainable Additive Manufacturing: {{The}} Need for Awareness of Particle and Vapor Releases during Polymer Recycling, Making Filament, and Fused Filament Fabrication 3-{{D}} Printing}, - author = {Stefaniak, Aleksandr B. and Bowers, Lauren N. and Cottrell, Gabe and Erdem, Ergin and Knepp, Alycia K. and Martin, Stephen B. and Pretty, Jack and Duling, Matthew G. and Arnold, Elizabeth D. and Wilson, Zachary and Krider, Benjamin and Fortner, Alyson R. and LeBouf, Ryan F. and Virji, M. Abbas and Sirinterlikci, Arif}, - year = {2022}, - journal = {Resources, Conservation and Recycling}, - volume = {176}, - number = {August 2021}, - pages = {105911}, - publisher = {{Elsevier B.V.}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105911}, - keywords = {{3-D printing,Plastics,Circular economy,Schools,Lib}}, - file = {/Users/fabio/Zotero/storage/2Z3G2ZHT/Voc.pdf} -} - -@article{StefanJosupeitStefanRusenberg2014, - title = {A Material-Based Quality Concept for Polymer Laser Sintering}, - author = {Stefan Josupeit, Stefan R{\"u}senberg, Hans-Joachim Schmid}, - year = {2014}, - journal = {Antec}, - pages = {44--54}, - abstract = {In this work, the quality of laser sintered parts is investigated along a defined process chain for a nylon 12 material (PA 2200) on an EOSINT P395 laser sintering system. Important influencing factors are figured out. Rheological powder characterization methods are investigated as well as mechanical, physical and other chosen part properties. The concept allows reproducible part quality characteristics and is used to obtain (testing) temperature dependent material data. It can also be extended on further materials based on nylon 12: PA 2241 FR, which is convenient for the aircraft industry due to its flame-retardant properties, and PA 2221, which has economic advantages due to a lower material consumption.}, - file = {/Users/fabio/Zotero/storage/2EUBL43B/m-api-49cf8e1b-00f5-e69b-0089-c74f261a1b8f.pdf} -} - -@article{steffenAnthropoceneConceptualHistorical2011, - title = {The {{Anthropocene}}: Conceptual and Historical Perspectives}, - shorttitle = {The {{Anthropocene}}}, - author = {Steffen, Will and Grinevald, Jacques and Crutzen, Paul and McNeill, John}, - year = {2011}, - month = mar, - journal = {Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences}, - volume = {369}, - number = {1938}, - pages = {842--867}, - issn = {1364-503X, 1471-2962}, - doi = {10.1098/rsta.2010.0327}, - urldate = {2022-09-05}, - abstract = {The human imprint on the global environment has now become so large and active that it rivals some of the great forces of Nature in its impact on the functioning of the Earth system. Although global-scale human influence on the environment has been recognized since the 1800s, the term Anthropocene , introduced about a decade ago, has only recently become widely, but informally, used in the global change research community. However, the term has yet to be accepted formally as a new geological epoch or era in Earth history. In this paper, we put forward the case for formally recognizing the Anthropocene as a new epoch in Earth history, arguing that the advent of the Industrial Revolution around 1800 provides a logical start date for the new epoch. We then explore recent trends in the evolution of the Anthropocene as humanity proceeds into the twenty-first century, focusing on the profound changes to our relationship with the rest of the living world and on early attempts and proposals for managing our relationship with the large geophysical cycles that drive the Earth's climate system.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/LMXJQF98/Steffen et al. - 2011 - The Anthropocene conceptual and historical perspe.pdf} -} - -@article{steffenTrajectoriesEarthSystem2018, - title = {Trajectories of the {{Earth System}} in the {{Anthropocene}}}, - author = {Steffen, Will and Rockstr{\"o}m, Johan and Richardson, Katherine and Lenton, Timothy M. and Folke, Carl and Liverman, Diana and Summerhayes, Colin P. and Barnosky, Anthony D. and Cornell, Sarah E. and Crucifix, Michel and Donges, Jonathan F. and Fetzer, Ingo and Lade, Steven J. and Scheffer, Marten and Winkelmann, Ricarda and Schellnhuber, Hans Joachim}, - year = {2018}, - month = aug, - journal = {Proceedings of the National Academy of Sciences}, - volume = {115}, - number = {33}, - pages = {8252--8259}, - publisher = {{Proceedings of the National Academy of Sciences}}, - doi = {10.1073/pnas.1810141115}, - urldate = {2022-08-29}, - file = {/Users/fabio/Zotero/storage/946PMYFV/Steffen et al. - 2018 - Trajectories of the Earth System in the Anthropoce.pdf} -} - -@article{stegerMentalModelsSocialecological2021, - title = {Mental Models of a Social-Ecological System Facilitate Social Learning among a Diverse Management Team}, - author = {Steger, Cara and Gebrehiwot, Kflay and Chengere, Shambel Alemu and Marinkovich, Jake and Dullo, Bikila Warkineh and Zewde, Sisay Wube and Klein, Julia A.}, - year = {2021}, - month = aug, - journal = {Environmental Science \& Policy}, - volume = {122}, - pages = {127--138}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2021.04.006}, - urldate = {2021-05-10} -} - -@article{steinhorstFirstReduceReuse2021, - title = {First Reduce and Reuse, Then Recycle! {{Enabling}} Consumers to Tackle the Plastic Crisis \textendash{} {{Qualitative}} Expert Interviews in {{Germany}}}, - author = {Steinhorst, Julia and Beyerl, Katharina}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {313}, - pages = {127782}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127782}, - urldate = {2021-06-20} -} - -@article{Steinle2016, - title = {Characterization of Emissions from a Desktop {{3D}} Printer and Indoor Air Measurements in Office Settings}, - author = {Steinle, Patrick}, - year = {2016}, - month = feb, - journal = {Journal of Occupational and Environmental Hygiene}, - volume = {13}, - number = {2}, - pages = {121--132}, - issn = {1545-9624}, - doi = {10.1080/15459624.2015.1091957}, - pmid = {26550911}, - file = {/Users/fabio/Zotero/storage/LECKUD4I/Steinle - 2016 - Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings.pdf} -} - -@article{Steinmann2019, - title = {How to Define the Quality of Materials in a Circular Economy?}, - author = {Steinmann, Z.J.N. and Huijbregts, M.A.J. and Reijnders, L.}, - year = {2019}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {141}, - pages = {362--363}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2018.10.040} -} - -@article{Stephens2013, - title = {Ultrafine Particle Emissions from Desktop {{3D}} Printers}, - author = {Stephens, Brent and Azimi, Parham and El Orch, Zeineb and Ramos, Tiffanie}, - year = {2013}, - month = nov, - journal = {Atmospheric Environment}, - volume = {79}, - pages = {334--339}, - publisher = {{Elsevier Ltd}}, - issn = {13522310}, - doi = {10.1016/j.atmosenv.2013.06.050}, - abstract = {The development of low-cost desktop versions of three-dimensional (3D) printers has made these devices widely accessible for rapid prototyping and small-scale manufacturing in home and office settings. Many desktop 3D printers rely on heated thermoplastic extrusion and deposition, which is a process that has been shown to have significant aerosol emissions in industrial environments. However, we are not aware of any data on particle emissions from commercially available desktop 3D printers. Therefore, we report on measurements of size-resolved and total ultrafine particle (UFP) concentrations resulting from the operation of two types of commercially available desktop 3D printers inside a commercial office space. We also estimate size-resolved (11.5nm-116nm) and total UFP ({$<$}100nm) emission rates and compare them to emission rates from other desktop devices and indoor activities known to emit fine and ultrafine particles. Estimates of emission rates of total UFPs were large, ranging from \textasciitilde 2.0\texttimes 1010\#min-1 for a 3D printer utilizing a polylactic acid (PLA) feedstock to \textasciitilde 1.9\texttimes 1011\#min-1 for the same type of 3D printer utilizing a higher temperature acrylonitrile butadiene styrene (ABS) thermoplastic feedstock. Because most of these devices are currently sold as standalone devices without any exhaust ventilation or filtration accessories, results herein suggest caution should be used when operating in inadequately ventilated or unfiltered indoor environments. Additionally, these results suggest that more controlled experiments should be conducted to more fundamentally evaluate particle emissions from a wider arrange of desktop 3D printers. \textcopyright{} 2013 The Authors.}, - isbn = {13522310}, - pmid = {90106228}, - keywords = {Indoor aerosols,Molten extrusion deposition,Thermoplastic emission,Three-dimensional printers}, - file = {/Users/fabio/Zotero/storage/C74IZN65/Stephens et al. - 2013 - Ultrafine particle emissions from desktop 3D printers.pdf} -} - -@book{Sterman2000, - title = {Sterman-{{Business Dynamics}}}, - author = {Sterman, {\relax John}. D.}, - year = {2000}, - isbn = {0-07-238915-X}, - file = {/Users/fabio/Zotero/storage/MKYMTR9U/John D Sterman - Business Dynamics Systems Thinking and Modeling for a Complex World (2000, McGraw-Hill Higher Education) - libgen.lc (1).pdf} -} - -@article{Stern2019, - title = {Additive Manufacturing: {{An}} Education Strategy for Engineering Students}, - author = {Stern, A. and Rosenthal, Y. and Dresler, N. and Ashkenazi, D.}, - year = {2019}, - month = may, - journal = {Additive Manufacturing}, - volume = {27}, - pages = {503--514}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.04.001} -} - -@article{sternbergAWOKETheoryRepresentation2021, - title = {{{AWOKE}}: {{A}} Theory of Representation and Process in Intelligence as Adaptation to the Environment}, - author = {Sternberg, Robert J.}, - year = {2021}, - month = nov, - journal = {Personality and Individual Differences}, - volume = {182}, - pages = {111108}, - publisher = {{Pergamon}}, - issn = {01918869}, - doi = {10.1016/j.paid.2021.111108}, - urldate = {2021-07-06} -} - -@article{sternerPolicyDesignAnthropocene2019, - title = {Policy Design for the {{Anthropocene}}}, - author = {Sterner, Thomas and Barbier, Edward B. and Bateman, Ian and {van den Bijgaart}, Inge and Cr{\'e}pin, Anne-Sophie and Edenhofer, Ottmar and Fischer, Carolyn and Habla, Wolfgang and Hassler, John and {Johansson-Stenman}, Olof and Lange, Andreas and Polasky, Stephen and Rockstr{\"o}m, Johan and Smith, Henrik G. and Steffen, Will and Wagner, Gernot and Wilen, James E. and Alp{\'i}zar, Francisco and Azar, Christian and Carless, Donna and Ch{\'a}vez, Carlos and Coria, Jessica and Engstr{\"o}m, Gustav and Jagers, Sverker C. and K{\"o}hlin, Gunnar and L{\"o}fgren, {\AA}sa and Pleijel, H{\aa}kan and Robinson, Amanda}, - year = {2019}, - month = jan, - journal = {Nature Sustainability}, - volume = {2}, - number = {1}, - pages = {14--21}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-018-0194-x}, - urldate = {2022-09-23}, - abstract = {Today, more than ever, `Spaceship Earth' is an apt metaphor as we chart the boundaries for a safe planet1. Social scientists both analyse why society courts disaster by approaching or even overstepping these boundaries and try to design suitable policies to avoid these perils. Because the threats of transgressing planetary boundaries are global, long-run, uncertain and interconnected, they must be analysed together to avoid conflicts and take advantage of synergies. To obtain policies that are effective at both international and local levels requires careful analysis of the underlying mechanisms across scientific disciplines and approaches, and must take politics into account. In this Perspective, we examine the complexities of designing policies that can keep Earth within the biophysical limits favourable to human life.}, - copyright = {2019 Springer Nature Limited}, - langid = {english}, - keywords = {Economics,Environmental economics,Interdisciplinary studies,Sustainability}, - file = {/Users/fabio/Zotero/storage/HMBUU5AI/Sterner et al. - 2019 - Policy design for the Anthropocene.pdf;/Users/fabio/Zotero/storage/XWQNVU8L/s41893-018-0194-x.html} -} - -@article{sternResearchPolicyChris2021, - title = {Research Policy, {{Chris Freeman}} Special Issue Innovation, Growth and the Transition to Net-Zero Emissions}, - author = {Stern, Nicholas and Valero, Anna}, - year = {2021}, - month = nov, - journal = {Research Policy}, - volume = {50}, - number = {9}, - pages = {104293}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104293}, - urldate = {2021-06-21}, - file = {/Users/fabio/Zotero/storage/T3M23VK4/full-text.pdf} -} - -@book{Stevens1995, - title = {Extruder {{Principles}} and {{Operation}}}, - author = {Stevens, M. J. and Covas, J. A.}, - year = {1995}, - publisher = {{Springer Netherlands}}, - address = {{Dordrecht}}, - doi = {10.1007/978-94-011-0557-6}, - urldate = {2015-02-26}, - isbn = {978-94-010-4247-5}, - file = {/Users/fabio/Zotero/storage/7TTVQT7V/Extruder Principles and Operation.pdf;/Users/fabio/Zotero/storage/ZBD5T98E/Extruder Principles and Operation.pdf} -} - -@article{stiefNewMethodologyAnalyze2018, - title = {A New Methodology to Analyze the Functional and Physical Architecture of Existing Products for an Assembly Oriented Product Family Identification}, - author = {Stief, Paul and Dantan, Jean-Yves and Etienne, Alain and Siadat, Ali}, - year = {2018}, - doi = {10.1016/j.procir.2022.02.017}, - urldate = {2022-05-02}, - abstract = {In today's business environment, the trend towards more product variety and customization is unbroken. Due to this development, the need of agile and reconfigurable production systems emerged to cope with various products and product families. To design and optimize production systems as well as to choose the optimal product matches, product analysis methods are needed. Indeed, most of the known methods aim to analyze a product or one product family on the physical level. Different product families, however, may differ largely in terms of the number and nature of components. This fact impedes an efficient comparison and choice of appropriate product family combinations for the production system. A new methodology is proposed to analyze existing products in view of their functional and physical architecture. The aim is to cluster these products in new assembly oriented product families for the optimization of existing assembly lines and the creation of future reconfigurable assembly systems. Based on Datum Flow Chain, the physical structure of the products is analyzed. Functional subassemblies are identified, and a functional analysis is performed. Moreover, a hybrid functional and physical architecture graph (HyFPAG) is the output which depicts the similarity between product families by providing design support to both, production system planners and product designers. An illustrative example of a nail-clipper is used to explain the proposed methodology. An industrial case study on two product families of steering columns of thyssenkrupp Presta France is then carried out to give a first industrial evaluation of the proposed approach.}, - keywords = {Assembly,Design method,Family identification}, - file = {/Users/fabio/Zotero/storage/SG9VITFS/full-text.pdf} -} - -@article{stinglResearchAgendaStudying2021, - title = {A Research Agenda for Studying Project Decision-Behaviour through the Lenses of Simple Heuristics}, - author = {Stingl, Verena and Geraldi, Joana}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120367}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120367}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/AG8TYJ29/full-text.pdf} -} - -@article{stipe3DPrintingReusable, - title = {{{3D Printing}} with {{Reusable Voxels}} : {{A Faster}} and {{Greener Future}}}, - author = {Stipe, Audrey and Wan, Hungda}, - number = {210}, - keywords = {3D Printing with Reusable Voxels: A Faster and Gre}, - file = {/Users/fabio/Zotero/storage/JK52JQWT/Stipe, Wan - Unknown - 3D Printing with Reusable Voxels A Faster and Greener Future.pdf} -} - -@misc{StochasticOptimisationModel, - title = {Stochastic Optimisation Model for Integrated Decisions on Relief Supply Chains: Preparedness for Disaster Response}, - shorttitle = {Stochastic Optimisation Model for Integrated Decisions on Relief Supply Chains}, - issn = {0020-7543}, - urldate = {2023-06-08}, - howpublished = {https://www-tandfonline-com.bases-doc.univ-lorraine.fr/doi/epdf/10.1080/00207543.2016.1211340?needAccess=true\&role=button}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/TICIJEQR/00207543.2016.html} -} - -@article{Stock-Homburg2021, - title = {Need-Solution Pair Recognition by Household Sector Individuals: {{Evidence}}, and a Cognitive Mechanism Explanation}, - author = {{Stock-Homburg}, Ruth M. and Heald, Shannon L.M. and Holthaus, Christian and Gillert, Nils Lennart and von Hippel, Eric}, - year = {2021}, - month = jul, - journal = {Research Policy}, - volume = {50}, - number = {8}, - pages = {104068}, - publisher = {{Elsevier B.V.}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104068}, - urldate = {2020-08-09}, - abstract = {Problem-solving by everyday individuals is thought to occur as a two-step process. First, an individual identifies or formulates a problem, followed by entering into a subsequent search to find the best solution. Here, however, we consider an alternative process that everyday individuals may use for solution finding first theorized by von Hippel and von Krogh (2016). Specifically, von Hippel and von Krogh proposed that everyday individuals may sometimes discover a solution and the need it satisfies simultaneously without the need for apriori problem formation, a cognitive process they called ``need-solution pair recognition''. Utilizing a rich literature from psychology and neuroscience, we propose that seemingly spontaneous discoveries found by need-solution pair recognition are natural products of the object recognition system and its underlying mechanisms. This view asserts that on encountering an object and reasoning how it might be used (i.e. functional object understanding), an individual's perception of an object may culminate in recognizing the object as a solution, and in some cases, as a solution to a problem previously unknown to him or her, thus bypassing formal problem-formulation and active solution searching entirely. To empirically test this view, we manipulated the ability of everyday individuals to functionally reason about objects while we examined the spontaneous occurrence of solutions found by either need-solution pair recognition or traditional problem-first problem-solving. Consistent with our hypothesized mechanism, our results indicate that need-solution pair recognition occurs more frequently when constraints on functional object understanding are reduced. That is, we found that needsolution pair discoveries outpaced solutions found from traditional problem solving, in environments with unfamiliar objects, where participants were not directed to solve specific problems. Our results provide clear evidence that everyday individuals in the household sector do not always innovate through traditional problem-solving processes, but instead may arrive at solutions as they recognize and reason about objects. Implications for research and practice in household innovation, and for innovation more generally are considered.}, - keywords = {Creativity,Insight,Need-solution pairs,Object understanding,Problem-solving,Solution finding}, - file = {/Users/fabio/Zotero/storage/YESWU5RH/full-text.pdf} -} - -@article{stoddardThreeDecadesClimate2021, - title = {Three {{Decades}} of {{Climate Mitigation}}: {{Why Haven}}'t {{We Bent}} the {{Global Emissions Curve}}?}, - author = {Stoddard, Isak and Anderson, Kevin and Capstick, Stuart and Carton, Wim and Depledge, Joanna and Facer, Keri and Gough, Clair and Hache, Frederic and Hoolohan, Claire and Hultman, Martin and H{\"a}llstr{\"o}m, Niclas and Kartha, Sivan and Klinsky, Sonja and Kuchler, Magdalena and L{\"o}vbrand, Eva and Nasiritousi, Naghmeh and Newell, Peter and Peters, Glen P. and Sokona, Youba and Stirling, Andy and Stilwell, Matthew and Spash, Clive L. and Williams, Mariama}, - year = {2021}, - month = oct, - journal = {https://doi.org/10.1146/annurev-environ-012220-011104}, - volume = {46}, - number = {1}, - pages = {653--689}, - publisher = {{Annual Reviews}}, - doi = {10.1146/ANNUREV-ENVIRON-012220-011104}, - urldate = {2021-11-07}, - abstract = {Despite three decades of political efforts and a wealth of research on the causes and catastrophic impacts of climate change, global carbon dioxide emissions have continued to rise and are 60\% high...}, - keywords = {climate mitigation,energy transitions,knowledge traditions,lock-ins,power,societal transformations} -} - -@article{Stoeva2017, - title = {Influence of Recycling Programmes on Waste Separation Behaviour}, - author = {Stoeva, Katya and Alriksson, Stina}, - year = {2017}, - journal = {Waste Management}, - volume = {68}, - pages = {732--741}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2017.06.005}, - abstract = {To achieve high rates of waste reuse and recycling, waste separation in households is essential. This study aimed to reveal how recycling programmes in Sweden and Bulgaria influenced inhabitants' participation in separation of household waste. The waste separation behaviour of 111 university students from Kalmar, Sweden and 112 students from Plovdiv, Bulgaria was studied using the Theory of Planned Behaviour framework. The results showed that a lack of proper conditions for waste separation can prevent individuals from participating in this process, regardless of their positive attitudes. When respondents were satisfied with the local conditions for waste separation their behaviour instead depended on their personal attitudes towards waste separation and recycling.}, - isbn = {0956-053X}, - keywords = {Recycling,Recycling programme,Theory of Planned Behaviour,Waste management,Waste separation behaviour}, - file = {/Users/fabio/Zotero/storage/WMPX9QEP/Influence of recycling programmes on waste separation behaviour.pdf} -} - -@article{Stol2015, - title = {Inner {{Source}}\textendash{{Adopting}} Open Source Development Practices in Organizations: {{A}} Tutorial}, - author = {Stol, Klaas-Jan and Fitzgerald, Brian}, - year = {2015}, - month = jul, - journal = {IEEE Software}, - volume = {32}, - number = {4}, - pages = {60--67}, - issn = {0740-7459}, - doi = {10.1109/MS.2014.77} -} - -@article{Stoof2018, - title = {Sustainable Composite Fused Deposition Modelling Filament Using Recycled Pre-Consumer Polypropylene}, - author = {Stoof, David and Pickering, Kim}, - year = {2018}, - month = feb, - journal = {Composites Part B: Engineering}, - volume = {135}, - number = {October 2017}, - pages = {110--118}, - publisher = {{Elsevier}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2017.10.005}, - abstract = {Composite filaments with differing harakeke, hemp fibre or recycled gypsum contents (0-50 wt\%) in pre-consumer recycled polypropylene (PP) were produced and mechanically assessed. Furthermore, a novel method of measuring shrinkage in 3D printed components was also developed and used to assess shrinkage of filaments. The most successful filaments contained 30 wt\% harakeke fibre and had a tensile strength and Young's modulus of 39 MPa and 2.8 GPa respectively, providing improvements in tensile strength and Young's modulus compared to those of plain PP filament of 74\% and 214\% respectively. However, these properties were seen to reduce on printing, although fibre reinforcement was still observed to provide benefit in terms of strength and shrinkage. The cause of the mechanical property reduction was assumed to be stress relaxation of the polymer during printing which is conducted at lower pressure compared to filament production. 30 wt\% harakeke filament also underwent the least shrinkage of 0.34\% corresponding to a net reduction of 84\% relative to plain PP.}, - keywords = {Mechanical properties,Natural fibres,Shrinkage}, - file = {/Users/fabio/Zotero/storage/DF8UQU6E/sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene .pdf} -} - -@article{stornelliAdvancedManufacturingTechnology2021, - title = {Advanced Manufacturing Technology Adoption and Innovation: {{A}} Systematic Literature Review on Barriers, Enablers, and Innovation Types}, - author = {Stornelli, Aldo and Ozcan, Sercan and Simms, Christopher}, - year = {2021}, - month = jul, - journal = {Research Policy}, - volume = {50}, - number = {6}, - pages = {104229}, - publisher = {{Elsevier BV}}, - issn = {00487333}, - doi = {10.1016/j.respol.2021.104229}, - urldate = {2021-04-20} -} - -@article{strandNewNarrativesInnovation2018, - title = {New Narratives for Innovation}, - author = {Strand, Roger and Saltelli, Andrea and Giampietro, Mario and Rommetveit, Kjetil and Funtowicz, Silvio}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - series = {Technology and {{Degrowth}}}, - volume = {197}, - pages = {1849--1853}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2016.10.194}, - urldate = {2022-10-11}, - abstract = {Sociotechnical imaginaries are visions of desired social and technological futures created and sustained by stakeholders in science, industry and politics. Within the dominating innovation narratives there are a number of implicit and explicit beliefs that are both descriptive and normative. Technological optimism is the prevailing discourse, challenged by alternative imaginaries, among them a narrative of degrowth. In this paper we argue for the importance of producing more democratic and sustainable imaginations of future social and technological trajectories. We indicate how new narratives for innovation may include different perspectives and sources of knowledge, including heterodox economics, bio-economics, science and technology studies, and Post-Normal Science. The replacement of policy narratives, however, is not achieved through science speaking truth to power. If that were the case, policies would have changed a long time ago. The present analysis and discussion illustrates how the challenge of replacement is itself one that calls for a reflexive understanding of the relationship between knowledge, belief and agency in complex research and innovation (R\&I) systems.}, - langid = {english}, - keywords = {Post-normal science,Sociotechnical imaginaries}, - file = {/Users/fabio/Zotero/storage/K6PY5NCL/Strand et al. - 2018 - New narratives for innovation.pdf;/Users/fabio/Zotero/storage/UW6URVTI/S095965261631825X.html} -} - -@article{Strangl2018, - title = {Comparison of the Odorant Composition of Post-Consumer High-Density Polyethylene Waste with Corresponding Recycled and Virgin Pellets by Combined Instrumental and Sensory Analysis}, - author = {Strangl, Miriam and Schlummer, Martin and Maeurer, Andreas and Buettner, Andrea}, - year = {2018}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {181}, - pages = {599--607}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.01.137}, - urldate = {2020-04-08}, - abstract = {Both, for ecological and economic reasons, the recycling of plastics for new or broader applications is currently gaining more and more attention. As high-density polyethylene (HDPE) plays an essential role in various packaging, the recycling of this material is particularly sought for. Thereby, odorous contaminants are a common obstacle when aiming at achieving high-quality HDPE recycled goods. In this respect, revealing the differences in the odorant composition of waste, recycled pellets and virgin pellets provides insights into odor sources and formation pathways and therefore supports the developing of optimized avoidance strategies. For this reason, the odor of post-consumer HDPE waste, corresponding recycled HDPE pellets and virgin HDPE granules was analyzed in the frame of the present study by comprehensive sensory analysis as well as instrumental analysis using high resolution gas chromatography-olfactometry followed by two-dimensional high resolution gas chromatography-mass spectrometry-olfactometry. In total, 32 odorous substances were identified. While some oxidation products were present in all three samples, albeit mostly with much higher smell intensity when regarding the waste and the recycled pellets, a number of terpenes as well as phenylpropanoids were found only in the HDPE waste and recycled material and, in most cases, with high sensory abundance. These odorants are likely to stem from fragrances used in cosmetics and washing/cleaning agents. Moreover, comparative odor extract dilution analysis (cOEDA) revealed that the applied conventional recycling process resulted only in a slight reduction of the odor pollution; moreover, it could be shown that no new odorants were generated to any relevant extent. Accordingly, this study shows that further optimized strategies for odorant removal from post-consumer recycled HDPE material are required.}, - keywords = {Gas chromatography olfactometry,HDPE recycling,Mass spectrometry,Migration,Odor extract dilution analysis,Plastics}, - file = {/Users/fabio/Zotero/storage/Q8VGF8EQ/Comparison of the odorant composition of post-consumer high-density polyethylene waste with corresponding recycled and virgin pellets by combined instrumental and sensory analysis.pdf} -} - -@article{Strangl2019, - title = {Evaluation of the Efficiency of Odor Removal from Recycled {{HDPE}} Using a Modified Recycling Process}, - author = {Strangl, Miriam and Ortner, Eva and Buettner, Andrea}, - year = {2019}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {146}, - pages = {89--97}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2019.03.009}, - urldate = {2020-04-08}, - abstract = {A series of recent global and local policymaking processes is promoting or demanding developments in the recycling of post-consumer plastic packaging waste. After successfully clearing most hurdles in the PET bottle sector to promote a successful market launch of the recycled PET products, it is now important to take measures to meet the challenges associated with the recycling of polyolefins such as HDPE. In this respect, the need to further improve recycling technologies is currently prevalent because the quality parameters of the recycled materials do not yet meet the strict industrial requirements. In this context, apart from optical or mechanical properties, there is increasing awareness of odorous contaminants in the recycled products. Therefore, in this study, a modified HDPE recycling method was evaluated for its ability to reduce odors. For the aim of mapping and understanding the odor of recycled HDPE pellets with different residence times in a special decontamination reactor a combinatory sensory and instrumental-olfactometric approach was applied. Furthermore, based on the characterization of the causative odorants by gas chromatography-olfactometry and two-dimensional gas chromatography-mass spectrometry/olfactometry, quantitative determination of selected odorants was carried out over time using stable isotope dilution analysis. With regard to the decontamination efficacy of the evaluated decontamination process, we observed that the decrease in the concentration profiles of the monitored odorants went along with a sensorially relevant overall odor minimization of the recycled HDPE. The results of the study are aiding the adaptation of technological procedures for smell reduction or complete decontamination.}, - keywords = {Gas chromatography,Odor,Olfactometry,Plastic,Pollution,Stable isotope dilution analysis}, - file = {/Users/fabio/Zotero/storage/GNB88L8K/Evaluation of the efficiency of odor removal from recycled HDPE using a modified recycling process.pdf} -} - -@article{Strasser2019, - title = {Developing the Transformative Capacity of Social Innovation through Learning: {{A}} Conceptual Framework and Research Agenda for the Roles of Network Leadership}, - author = {Strasser, Tim and {de Kraker}, Joop and Kemp, Ren{\'e}}, - year = {2019}, - journal = {Sustainability (Switzerland)}, - volume = {11}, - number = {5}, - pages = {1--21}, - issn = {20711050}, - doi = {10.3390/su11051304}, - abstract = {Learning processes play a crucial role in the development of the transformative capacity of social innovation actors. This article builds on the recently developed Transformative Social Innovation (TSI) theory to propose a conceptual framework and research agenda for understanding and investigating the roles and limits of network leadership in supporting learning processes that serve to develop the transformative capacity of social innovation. This focus on network leadership is underdeveloped so far in TSI theory. Addressing this research gap also serves to increase the practical relevance of TSI theory to practitioners engaged in network leadership. After presenting a synopsis of TSI theory, we present an overview of the elements of the conceptual framework, which are successively specified throughout the article. First, transformative change is conceptualized, involving three institutional dimensions: depth, width and length. Based on this, a definition of transformative capacity is proposed that addresses change across these three dimensions. We then describe how various types of learning processes can contribute to the development of transformative capacity. Next, we outline the roles of network leadership in supporting these learning processes across various network levels. We conclude with a research agenda for empirically investigating these roles of network leaders as agents for advancing transformative changes for sustainability.}, - keywords = {Learning,Network leadership,Networks,Transformative social innovation}, - file = {/Users/fabio/Zotero/storage/4RALSHJJ/Strasser et al_2019_Developing the transformative capacity of social innovation through learning.pdf;/Users/fabio/Zotero/storage/D78N4HLV/Developing the transformative capacity of social innovation through learning A conceptual framework and research agenda for the roles of.pdf} -} - -@inproceedings{Straub2016, - title = {Consideration of the Versatility of the {{Open Prototype}} for {{Educational NanoSats CubeSat}} Design}, - booktitle = {2016 {{IEEE}} Int. {{Conf}}. {{Electro}} Inf. {{Technol}}.}, - author = {Straub, Jeremy}, - year = {2016}, - month = may, - pages = {0586--0591}, - publisher = {{IEEE}}, - doi = {10.1109/EIT.2016.7535305}, - isbn = {978-1-4673-9985-2} -} - -@inproceedings{Strom2012, - title = {A Desktop {{3D}} Printer in Safety-Critical {{Java}}}, - booktitle = {Proceedings of the 10th {{International Workshop}} on {{Java Technologies}} for {{Real-time}} and {{Embedded Systems}} - {{JTRES}} '12}, - author = {Str{\o}m, T{\'o}rur Biskopst{\o} and Schoeberl, Martin}, - year = {2012}, - pages = {72}, - publisher = {{ACM Press}}, - address = {{New York, New York, USA}}, - doi = {10.1145/2388936.2388949}, - abstract = {It is desirable to bring Java technology to safety-critical systems. To this end The Open Group has created the safety-critical Java specification, which will allow Java applications, written accord- ing to the specification, to be certifiable in accordance with safety- critical standards. Although there exist several safety-critical Java framework implementations, there is a lack of safety-critical use cases implemented according to the specification. In this paper we present a 3D printer and its safety-critical Java level 1 implementation as a use case. With basis in the implemen- tation we evaluate the specification and its usability for developers of safety-critical systems.}, - isbn = {978-1-4503-1688-0}, - keywords = {reprap,safety-critical java,scoped memory}, - file = {/Users/fabio/Zotero/storage/U5H28PEY/Strøm, Schoeberl - 2012 - A desktop 3D printer in safety-critical Java.pdf} -} - -@article{Stromberg2009, - title = {The Design of a Test Protocol to Model the Degradation of Polyolefins during Recycling and Service Life}, - author = {Str{\"o}mberg, Emma and Karlsson, Sigbritt}, - year = {2009}, - month = may, - journal = {Journal of Applied Polymer Science}, - volume = {112}, - number = {3}, - eprint = {1206.4529}, - pages = {1835--1844}, - issn = {00218995}, - doi = {10.1002/app.29724}, - archiveprefix = {arxiv}, - isbn = {0124002005}, - pmid = {19875328}, - file = {/Users/fabio/Zotero/storage/JC7RML9N/The Design of a Test Protocol to Model the Degradation of Polyolefins During Recycling and Service Life.pdf} -} - -@book{Strong2006, - title = {Plastics: {{Materials}} and {{Processing}}}, - author = {Strong, a. Brent}, - year = {2006}, - abstract = {This book is designed to introduce plastics to a wide range of non-chemists who need to either gain, improve, or refresh their knowledge of plastic materials and manufacturing. It fully discusses both materials and manufacturing processes in a carefully-constructed and logical presentation. While providing a fundamental overview of a broad spectrum of topics, this book's high level of detail makes it valuable as a professional reference manual.Complete examination of materials, processes and performance of plastics includes many recent developmentsat the molecular, micro and macro levelssuch as conductive polymers, nano technology, biodegradable polymers, bio-based raw materials, twin-sheet thermoforming, and health considerations of plasticizers.Appropriate as a reference manual by manufacturing engineers, chemical engineers, plastics engineers, mechanical engineers, industrial engineers, or any other engineer working in a plastics-oriented company.}, - isbn = {0-13-114558-4}, - file = {/Users/fabio/Zotero/storage/6355D9SY/Plastics Materials and Processing.pdf} -} - -@article{Strydom2018, - title = {Barriers to {{Household Waste Recycling}}: {{Empirical Evidence}} from {{South Africa}}}, - author = {Strydom, Wilma}, - year = {2018}, - month = sep, - journal = {Recycling}, - volume = {3}, - number = {3}, - pages = {41}, - publisher = {{MDPI AG}}, - issn = {2313-4321}, - doi = {10.3390/recycling3030041}, - urldate = {2020-03-12}, - abstract = {A small percentage of South Africans regularly recycle most of their recyclables, which was only 4\% and 7.2\% in 2010 and 2015, respectively. This empirical quantitative study, the first study on this scale in South Africa, aimed to ascertain the reasons why people do not recycle. This paper reports the results from a survey conducted among a representative sample of 2004 respondents in eleven of South Africa's large urban areas. Each respondent selected three main reasons why people do not recycle from ten possible options as well as the one main reason. The results show that (i) insufficient space, (ii) no time, (iii) dirty and untidiness associated with recycling, (iv) lack of recycling knowledge, and (v) inconvenient recycling facilities are perceived as the main reasons why people do not recycle. Non-recycling households (74\% of the respondents) give high priority to time and knowledge. Low recyclers\textemdash those that sporadically recycle few items\textemdash and young South Africans give high priority to services (inconvenient facilities and no curbside collection). Lack of knowledge is an important factor for people from dense settlements as well as the unemployed looking for work. Improved recycling services such as regular curbside collections have the potential to overcome time and space barriers. Recycling services as well as recycling knowledge will have to improve to encourage the youth, the unemployed, and those living in informal areas to recycle and realize the opportunities locked in the waste sector. The perceptions of respondents from non-recycling households differ from those from recycling households. The larger representation of non-recyclers in developing countries emphasize the importance of understanding local evidence when comparing and implementing results from developed countries. The learning from this study could also assist other developing countries to encourage household participation in recycling initiatives.}, - keywords = {Barriers,Developing country,Empirical study,Household recycling behavior,Quantitative survey,Reasons}, - file = {/Users/fabio/Zotero/storage/NL3BDJTV/full-text.pdf} -} - -@article{Strydom2018a, - title = {Applying the Theory of Planned Behavior to Recycling Behavior in {{South Africa}}}, - author = {Strydom, Wilma F.}, - year = {2018}, - month = sep, - journal = {Recycling}, - volume = {3}, - number = {3}, - pages = {43}, - publisher = {{MDPI AG}}, - issn = {23134321}, - doi = {10.3390/recycling3030043}, - urldate = {2020-03-12}, - abstract = {This paper reports on an application of the Theory of Planned Behavior to understand the relationships between the determinants (latent variables) comprising the Theory of Planned Behavior and, based on these findings, to guide decision-making related to household recycling in South Africa. Data from a representative sample of respondents in large urban areas (n = 2004) was analyzed using Structural Equation Modeling (SEM). The results of the SEM analysis showed a good fit of the survey data to the Theory of Planned Behavior theoretical model. The Theory of Planned Behavior explains 26.4\% of the variance in recycling behavior and 46.4\% of the variance in intention to recycle. Only 3.3\% of South Africans in large urban areas show dedicated recycling behavior, considering the recycling of five materials: paper, plastic, glass, metal, and compostable organic waste. The recycling frequency item in the recycling behavior construct is the most likely to be over-reported. South Africans lack sufficient knowledge, positive attitudes, social pressure, and perceived control that would encourage recycling behavior. Awareness drives containing moral values (injunctive norms) and information about available recycling schemes, combined with the provision of a curbside collection service for recyclables, have the greatest chance to positively influence recycling behavior amongst South Africa's city dwellers.}, - keywords = {Recycling behavior,South Africa,Structural Equation Modeling (SEM),Theory of Planned Behavior (TPB)}, - file = {/Users/fabio/Zotero/storage/C9NU3AQH/full-text.pdf} -} - -@article{stumpfClimbingCircularityLadder2021, - title = {Climbing up the Circularity Ladder? \textendash{} {{A}} Mixed-Methods Analysis of Circular Economy in Business Practice}, - author = {Stumpf, Lukas and Sch{\"o}ggl, Josef-Peter and Baumgartner, Rupert J.}, - year = {2021}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {316}, - pages = {128158}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128158}, - urldate = {2021-07-20}, - file = {/Users/fabio/Zotero/storage/VGUMPZ8S/full-text.pdf} -} - -@article{Suarez-Eiroa2019, - title = {Operational Principles of Circular Economy for Sustainable Development: {{Linking}} Theory and Practice}, - author = {{Su{\'a}rez-Eiroa}, Brais and Fern{\'a}ndez, Emilio and {M{\'e}ndez-Mart{\'i}nez}, Gonzalo and {Soto-O{\~n}ate}, David}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {214}, - pages = {952--961}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.271} -} - -@article{Suarez-Eiroa2021, - title = {Integration of the Circular Economy Paradigm under the Just and Safe Operating Space Narrative: {{Twelve}} Operational Principles Based on Circularity, Sustainability and Resilience}, - author = {{Su{\'a}rez-Eiroa}, Brais and Fern{\'a}ndez, Emilio and M{\'e}ndez, Gonzalo}, - year = {2021}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {322}, - pages = {129071}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129071}, - urldate = {2021-09-20} -} - -@article{Suarez2020, - title = {Sustainability and Environmental Impact of Fused Deposition Modelling ({{FDM}}) Technologies}, - author = {Su{\'a}rez, Luis and Dom{\'i}nguez, Manuel}, - year = {2020}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {106}, - number = {3-4}, - pages = {1267--1279}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-019-04676-0}, - abstract = {This paper consists in a review of environmental issues of additive manufacturing technologies, mainly in those related to fused deposition modelling. The versatility, reduction of equipment costs due to patents expiring and the great flexibility offered by 3D printers have driven the amazing increase of these technologies in the last years. On the other hand, the democratization of additive manufacturing also poses some issues regarding environment; it is important to also have into account the potential effects of these technologies in the environment, coming from energy consumption, materials, and wastes produced. A review of different research works dealing with environmental impact of additive manufacturing, such as products' life cycle assessment, energy and materials consumption, and particles and gases releases (mainly due to health issues), has been performed. The assessment performed has helped highlighting the importance of environmental issues in additive manufacturing, according to the number of published papers. The main findings are the importance of establishing a method for applying eco-design principles taking into account the specific features of additive manufacturing.}, - keywords = {3D printing,Energy consumption,Environmental impact,Recycling,Sustainability,Volatile organic compounds}, - file = {/Users/fabio/Zotero/storage/M46DTNZ2/Suárez-Domínguez2020_Article_SustainabilityAndEnvironmental.pdf} -} - -@article{suarezRethinkingUseBiobased2022, - title = {Rethinking the Use of Bio-Based Plastics to Accelerate the Decarbonization of Our Society}, - author = {Suarez, Antonio and Ford, Ericka and Venditti, Richard and Kelley, Stephen and Saloni, Daniel and Gonzalez, Ronalds}, - year = {2022}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {186}, - pages = {106593}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106593}, - urldate = {2022-08-11}, - abstract = {The need to tackle the current environmental impact of plastics is driving the development of new bio-based materials. Although these bioplastics offer carbon footprint reductions, their role in a more sustainable economy is still unclear. Herein, a systematic review was performed to understand the impact of producing bioplastics. This information was used to perform a life cycle assessment considering different end-of-life scenarios. Then a Smart Use of Materials based on the assumption of only using certain materials in targeted applications was proposed. It was found that the dedicated use of bio-polyethylene terephthalate for packaging and polylactic acid for textiles can offer a carbon footprint reduction of up to 67\% and 80\% respectively. Therefore, we present a major opportunity to decarbonize our society using current technologies and supply chains. This concept contributes to building a society that understands the place of bio-based materials and addresses pollution from a material selection perspective.}, - langid = {english}, - keywords = {Bio-based plastics,Bio-PET,Life cycle assessment,PLA,Smart use of materials}, - file = {/Users/fabio/Zotero/storage/W824QGJG/S092134492200427X.html} -} - -@article{Subramanian2000, - title = {Plastics Recycling and Waste Management in the {{US}}}, - author = {Subramanian, P.M}, - year = {2000}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {28}, - number = {3-4}, - pages = {253--263}, - issn = {09213449}, - doi = {10.1016/S0921-3449(99)00049-X}, - urldate = {2014-06-25}, - keywords = {- see front matter,00,0921-3449,1-302-2390444,1-302-2394953,2000 aceee published by,all rights reserved,elsevier science b,environment,fax,incineration,integrated waste,landfill,life cycle analysis,management,municipal waste,plastics recycling,tel,v,waste management,waste-to-energy}, - file = {/Users/fabio/Zotero/storage/MDN3KMGX/Plastics recycling and waste management in the US.pdf} -} - -@book{SubramanianSenthilkannanMuthu2016b, - title = {Handbook of {{Sustainability}} in {{Additive Manufacturing}}}, - author = {Subramanian Senthilkannan Muthu, Monica Mahesh Savalani}, - editor = {Muthu, Subramanian Senthilkannan and Savalani, Monica Mahesh}, - year = {2016}, - volume = {1}, - publisher = {{Springer Singapore}}, - address = {{Singapore}}, - issn = {2315-7651}, - doi = {10.1007/978-981-10-0606-7}, - isbn = {978-981-10-0604-3}, - file = {/Users/fabio/Zotero/storage/5SAHXRPD/Subramanian Senthilkannan Muthu - 2016 - Handbook of Sustainability in Additive Manufacturing(3).pdf} -} - -@article{suDecontaminationEfficienciesPostconsumer2021, - title = {Decontamination Efficiencies of Post-Consumer High-Density Polyethylene Milk Bottles and Prioritization of High Concern Volatile Migrants}, - author = {Su, Qi Zhi and Vera, Paula and Salafranca, Jes{\'u}s and Ner{\'i}n, Cristina}, - year = {2021}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {171}, - pages = {105640}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2021.105640}, - urldate = {2021-06-21}, - abstract = {High-density polyethylene (HDPE) milk bottles are well-distinguished from other plastics in the mix-collected plastic waste and have potential to be closed-loop recycled. To evaluate this option, volatile substances present in various recycled HDPE (rHDPE) pellets and flakes from postconsumer milk bottles were analysed for similarities between different industrial recycling companies and batches. All substances found were classified in five different levels based on toxicity, from level I to level V (high toxicity). Chemicals present in the samples from different recyclers varied considerably, while those from different batches of a given recycler gave similar results. However, the study of rHDPE stream mixed with high volume of non-milk-bottles provided significant differences between batches. Washing the rHDPE twice and applying extra decontamination techniques reduced to a half the intensities for most chemicals detected, including two toxicity level V substances, butylated hydroxytoluene and diethyl phthalate. Nevertheless, other two high concern compounds, octocrylene, and 2-ethylhexyl-4-methoxycinnamate were not significantly reduced and thus deserve special attention when decontaminating rHDPE and evaluating its feasibility for food contact uses. Extra decontamination was able to reduce the intensities of 1-dodecene and 1-tetradecene. In total, 265 substances were detected in migration tests (95\% ethanol and 3\% acetic acid) and 58 of them were prioritized by toxicity. Regarding volatile migrants, rHDPE with low content of non-milk-bottle could be safe for direct contact with low-fat content food. For high-fat foods, the main concerns could come from 1-tetradecene, octocrylene, and 2-ethylhexyl-4-methoxycinnamate.}, - keywords = {Decontamination,Food contact use,HDPE,Migration,Polyolefins recycling,Volatile compounds}, - file = {/Users/fabio/Zotero/storage/3ZX5MCY5/full-text.pdf} -} - -@article{Suenaga2018, - title = {The Emergence of Technological Paradigms: {{The}} Case of Heat Engines}, - author = {Suenaga, Keiichiro}, - year = {2018}, - month = dec, - journal = {Technology in Society}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2018.12.010} -} - -@article{suenagaIndustrialEnlightenmentTechnological2020, - title = {The `{{Industrial Enlightenment}}' and Technological Paradigms of the Modern Steel Industry}, - author = {Suenaga, Keiichiro}, - year = {2020}, - month = sep, - journal = {Technology in Society}, - pages = {101375}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101375}, - urldate = {2020-09-12}, - file = {/Users/fabio/Zotero/storage/CUJ69CQ3/full-text.pdf} -} - -@article{Suire2016, - title = {La Performance Des Lieux de Cocr\'eation de Connaissances:{{Le}} Cas Des {{FabLabs}}}, - author = {Suire, Rapha{\"e}l}, - year = {2016}, - journal = {Reseaux}, - volume = {196}, - number = {2}, - pages = {81--109}, - issn = {07517971}, - doi = {10.3917/res.196.0081}, - isbn = {9782707189615}, - file = {/Users/fabio/Zotero/storage/CVXG5G3Y/RES_196_0081.pdf} -} - -@article{suireInnovatingBricolageHow2018, - title = {Innovating by Bricolage: How Do Firms Diversify through Knowledge Interactions with {{FabLabs}}?}, - author = {Suire, Rapha{\"e}l}, - year = {2018}, - month = jul, - journal = {https://doi.org/10.1080/00343404.2018.1522431}, - volume = {53}, - number = {7}, - pages = {939--950}, - publisher = {{Routledge}}, - issn = {13600591}, - doi = {10.1080/00343404.2018.1522431}, - urldate = {2022-04-16}, - abstract = {This paper provides some insights into the way a fabrication laboratory (FabLab) increases local entrepreneurial capabilities by offering a new and collective way to co-shape novelties based on a b...}, - keywords = {bricolage,D20,entrepreneurship,FabLab,knowledge,L10,O32,place,R11}, - file = {/Users/fabio/Zotero/storage/ZEMYN4M3/full-text.pdf} -} - -@article{summersReviewElementsHuman2012, - title = {A Review of the Elements of Human Well-Being with an Emphasis on the Contribution of Ecosystem Services}, - author = {Summers, J. K. and Smith, L. M. and Case, J. L. and Linthurst, R. A.}, - year = {2012}, - month = jun, - journal = {Ambio}, - volume = {41}, - number = {4}, - pages = {327--340}, - issn = {00447447}, - doi = {10.1007/s13280-012-0256-7}, - urldate = {2021-06-10}, - abstract = {Natural ecosystems perform fundamental lifesupport services upon which human civilization depends. However, many people believe that nature provides these services for free and therefore, they are of little or no value. While we do not pay for them, we pay significantly for their loss in terms of wastewater treatment facilities, moratoriums on greenhouse gases, increased illnesses, reduced soil fertility and losses in those images of nature that contribute to our basic happiness. Little is understood about the well-being benefits of the natural environment and its ecosystem services. The interwoven relationship of ecosystems and human well-being is insufficiently acknowledged in the wider philosophical, social, and economic well-being literature. In this article, we discuss an approach to examine human well-being and the interactions of its four primary elements-basic human needs, economic needs, environmental needs, and subjective wellbeing- and ecosystem services. \textcopyright{} Royal Swedish Academy of Sciences 2012.}, - pmid = {22581385}, - keywords = {Ecological economics,Ecosystem services,Human well-being,Ubjective happiness,Utainability}, - file = {/Users/fabio/Zotero/storage/MB4IEKWB/full-text.pdf} -} - -@article{Sun2008, - title = {Effect of Processing Conditions on the Bonding Quality of {{FDM}} Polymer Filaments}, - author = {Sun, Q. and Rizvi, G.M. and Bellehumeur, C.T. and Gu, P.}, - year = {2008}, - journal = {Rapid Prototyping Journal}, - volume = {14}, - number = {2}, - pages = {72--80}, - issn = {1355-2546}, - doi = {10.1108/13552540810862028}, - urldate = {2014-10-15}, - keywords = {bonding,creep,sintering,thermal testing}, - file = {/Users/fabio/Zotero/storage/FMMD6JVK/Effect of processing conditions on the bonding quality of FDM polymer filaments.pdf} -} - -@article{Sun2015, - title = {A {{Review}} on {{3D Printing}} for {{Customized Food Fabrication}}}, - author = {Sun, Jie and Peng, Zhuo and Zhou, Weibiao and YHFuh, Jerry and Soon Hong, Geok and Chiu, Annette}, - year = {2015}, - journal = {Procedia Manufacturing}, - volume = {1}, - pages = {308--319}, - issn = {2351-9789}, - doi = {10.1016/j.promfg.2015.09.057}, - abstract = {This study introduces the first generation food printer concept designs and workable prototypes that target to revolutionize customized food fabrication by 3D printing (3DP). Different from robotics-based food manufacturing technologies designed to automate manual processes for mass production, 3D food printing integrates 3DP and digital gastronomy technique to manufacture food products with customization in shape, colour, flavor, texture and even nutrition. This introduces artistic capabilities to fine dining, and extend customization capabilities to industrial culinary sector. The selected prototypes are reviewed based on fabrication platforms and printing materials. A detailed discussion on specific 3DP technologies and their associate dispensing/printing process for 3D customized food fabrication are reported for single and multi-material applications. Eventually, impacts of food printing on personalized nutrition, on-demand food fabrication, food processing technologies and process design are reported. Their applications in domestic cooking or catering services can not only provide an engineering solution for customized food design and personalized nutrition control, but also a potential machine to reconfigure a customized food supply chain.}, - isbn = {0040-1625}, - keywords = {3D food printing,customized food fabrication,multi-material,platform design}, - file = {/Users/fabio/Zotero/storage/Y4HE4UUU/A Review on 3D Printing for Customized Food fabrication (2015).pdf} -} - -@article{Sun2015a, - title = {{{3D}} Food Printing\textemdash{{An}} Innovative Way of Mass Customization in Food Fabrication}, - author = {Sun, Jie and Peng, Zhuo and Yan, Liangkun and Fuh, Jerry and Hong, Geok Soon}, - year = {2015}, - month = jul, - journal = {International Journal of Bioprinting}, - volume = {1}, - number = {1}, - pages = {27--38}, - issn = {24247723}, - doi = {10.18063/IJB.2015.01.006}, - abstract = {About 15\%-25\% of the aging population suffers from swallowing difficulties, and this creates an in-creasing market need for mass customization of food. The food industry is investigating mass customization tech-niques to meet the individual needs of taste, nutrition, and mouthfeel. Three dimensional (3D) food printing is a potential solution to overcome drawbacks of current food customization techniques, such as lower production ef-ficiency and high manufacturing cost. This study introduces the first-generation food printer concept designs and functional prototypes targeted to revolutionize customized food fabrication by 3D printing (3DP). Unlike the ro-botics-based food manufacturing technologies designed to automate manual processes for mass production, 3D food printing integrates 3DP and digital gastronomy technique to customize food products. This introduces artistic capabilities into domestic cooking and extends customization capabilities to the industrial culinary sector. Its ap-plication in domestic cooking or catering services can not only provide an engineering solution for customized food design and personalized nutrition control, but also has the potential to reconfigure customized food supply chains. In this paper, the selected prototypes are reviewed based on fabrication platforms and printing materials. A de-tailed discussion on specific 3DP technologies and the associated dispensing/printing process for 3D customized food fabrication with single and multi-material applications is reported. Lastly, impacts of food printing on custo-mized food fabrication, personalized nutrition, food supply chain, and food processing technologies are discussed.}, - isbn = {2424-8002}, - keywords = {3D printing,Customized food fabrication,Mass customization,Multi-material,Platform design} -} - -@article{Sun2017, - title = {Envisioning the Era of {{3D}} Printing: A Conceptual Model for the Fashion Industry}, - author = {Sun, Lushan and Zhao, Li}, - year = {2017}, - month = dec, - journal = {Fashion and Textiles}, - volume = {4}, - number = {1}, - pages = {25}, - issn = {2198-0802}, - doi = {10.1186/s40691-017-0110-4} -} - -@article{Sun2018, - title = {Carbon Footprint Assessment for the Waste Management Sector: {{A}} Comparative Analysis of {{China}} and {{Japan}}}, - author = {Sun, Lu and Li, Zhaoling and Fujii, Minoru and Hijioka, Yasuaki and Fujita, Tsuyoshi}, - year = {2018}, - journal = {Frontiers in Energy}, - volume = {12}, - number = {3}, - pages = {400--410}, - issn = {20951698}, - doi = {10.1007/s11708-018-0565-z}, - abstract = {\textcopyright{} 2018 Higher Education Press and Springer-Verlag GmbH Germany, part of Springer Nature Waste management is becoming a crucial issue in modern society owing to rapid urbanization and the increasing generation of municipal solid waste (MSW). This paper evaluates the carbon footprint of the waste management sector to identify direct and indirect carbon emissions, waste recycling carbon emission using a hybrid life cycle assessment and input-output analysis. China and Japan was selected as case study areas to highlight the effects of different industries on waste management. The results show that the life cycle carbon footprints for waste treatment are 59.01 million tons in China and 7.01 million tons in Japan. The gap between these footprints is caused by the different waste management systems and treatment processes used in the two countries. For indirect carbon footprints, China's material carbon footprint and depreciation carbon footprint are much higher than those of Japan, whereas the purchased electricity and heat carbon footprint in China is half that of Japan. China and Japan have similar direct energy consumption carbon footprints. However, CO2emissions from MSW treatment processes in China (46.46 million tons) is significantly higher than that in Japan (2.72 million tons). The corresponding effects of waste recycling on CO2emission reductions are considerable, up to 181.37 million tons for China and 96.76 million tons for Japan. Besides, measures were further proposed for optimizing waste management systems in the two countries. In addition, it is argued that the advanced experience that developed countries have in waste management issues can provide scientific support for waste treatment in developing countries such as China.}, - keywords = {carbon footprint,hybrid LCA,waste management,waste recycling}, - file = {/Users/fabio/Zotero/storage/6T9ADK66/Carbon footprint assessment for the waste management sector- A comparative analysis of China and Japan.pdf} -} - -@article{Sun2019, - title = {Technology Heterogeneity and Efficiency of {{China}}'s Circular Economic Systems: {{A}} Game Meta-Frontier {{DEA}} Approach}, - author = {Sun, Jiasen and Li, Guo and Wang, Zhaohua}, - year = {2019}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {146}, - pages = {337--347}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.03.046} -} - -@article{Sun2020, - title = {Dominant Platform Capability, Symbiotic Strategy and the Construction of ``{{Internet}} + {{WEEE}} Collection'' Business ecosystem：{{A}} Comparative Study of Two Typical Cases in {{China}}}, - author = {Sun, Qiao and Wang, Chang and Zhou, Yifang and Zuo, Lyushui and Tang, Jianxiong}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {254}, - pages = {120074}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120074}, - file = {/Users/fabio/Zotero/storage/EBPIT5NS/Dominant platform capability, symbiotic strategy and the construction of “Internet + WEEE collection” business ecosystem：A comparative study of two typical cases in China.pdf} -} - -@article{Sun2020a, - title = {Virgin or Recycled? {{Optimal}} Pricing of {{3D}} Printing Platform and Material Suppliers in a Closed-Loop Competitive Circular Supply Chain}, - author = {Sun, Luoyi and Wang, Yixiao and Hua, Guowei and Cheng, T.C.E. and Dong, Jingxin}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105035}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105035}, - urldate = {2020-07-21}, - abstract = {Three-dimensional printing (3DP) or additive manufacturing is regarded as an environmentally friendly and sustainable form of manufacturing, which allows circular manufacturing as the 3D printed waste and products can be recycled for further 3DP operations. Due to the fact that the reclaimed material is commonly perceived to have poorer quality than the virgin material, the pricing of materials and printed products are crucial for consumers to decide their printing and material selection decisions. We consider a closed-loop competitive circular supply chain comprising (1) a 3DP platform that provides 3DP services to print products from virgin and recycled materials, (2) material suppliers that provide virgin and recycled materials (filaments) for the platform, and (3) end users who use the platform to print their products. We derive the prices, demands, and profits of the 3DP platform and material suppliers in Stackelberg equilibrium. We also conduct numerical studies using real-life data to generate practical insights from the analytical findings. Most interestingly, we find that while the platform prefers, both types of suppliers avoid, printing high-quality products from recycled material. We derive management insights and policy implications from the analytical and numerical findings for the closed-loop competitive circular supply chain.}, - keywords = {3D printing platform,Additive manufacturing,Circular economy,Closed-loop supply chain,Industry 4.0,Product quality differentiation} -} - -@article{sundqvist-andbergSustainabilityGovernanceContested2021, - title = {Sustainability Governance and Contested Plastic Food Packaging \textendash{} {{An}} Integrative Review}, - author = {{Sundqvist-Andberg}, Henna and {\AA}kerman, Maria}, - year = {2021}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {127111}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127111}, - urldate = {2021-04-29}, - file = {/Users/fabio/Zotero/storage/XBFQAW76/full-text.pdf} -} - -@article{Sung2015, - title = {A {{Review}} on {{Upcycling}}: {{Current Body}} of {{Literature}}, {{Knowledge Gaps}} and a {{Way Forward}}}, - author = {Sung, Kyungeun}, - year = {2015}, - journal = {International Conference on Environmental, Cultural, Economic and Social Sustainability}, - volume = {17}, - number = {4}, - pages = {28--40}, - abstract = { Abstract\textemdash Upcycling is a process in which used materials are converted into something of higher value and/or quality in their second life. It has been increasingly recognised as one promising means to reduce material and energy use, and to engender sustainable production and consumption. For this reason and other foreseeable benefits, the concept of upcycling has received more attention from numerous researchers and business practitioners in recent years. This has been seen in the growing number of publications on this topic since the 1990s. However, the overall volume of literature dealing with upcycling is still low and no major review has been presented. Therefore, in order to further establish this field, this paper analyses and summarises the current body of literature on upcycling, focusing on different definitions, trends in practices, benefits, drawbacks and barriers in a number of subject areas, and gives suggestions for future research by illuminating knowledge gaps in the area of upcycling.}, - keywords = {circular economy,cradle to cradle,production and consumption,sustainable,upcycling,waste management}, - file = {/Users/fabio/Zotero/storage/GL8I5HA5/m-api-17b5342f-c61a-3d23-1405-ba3d570d3f14.pdf} -} - -@article{sunMaterialFlowAnalysis2022, - title = {Material {{Flow}} Analysis of Plastics from Provincial Household Appliances in {{China}}: 1978\textendash 2016}, - shorttitle = {Material {{Flow}} Analysis of Plastics from Provincial Household Appliances in {{China}}}, - author = {Sun, Ningning and Wang, Peng and Jian, Xiaomei and Hao, Min and Yan, Xiaoyu and Chen, Wei-Qiang}, - year = {2022}, - month = nov, - journal = {Waste Management}, - volume = {153}, - pages = {156--166}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.08.031}, - urldate = {2022-09-18}, - abstract = {China has the highest level of plastic production and consumption in the world. The plastic waste ban has resulted in a lack of raw materials for plastic reprocessing, while household appliance-related plastic (HAP), as a high-value and high-quality plastic waste source, receives great attention to fill such a gap. As HAP is scattered and has been rapidly increasing, a better understanding of the spatial-temporal patterns of HAP waste is critical. For the first time, this study quantifies the stocks and flows of plastics contained in five categories of household appliances (refrigerator, washing machine, air conditioner, TV, and computer) in China over 1978\textendash 2016 and maps their province-specific distribution through a dynamic stock-driven material flow analysis model. We find that (i) the HAP stocks are growing rapidly to reach around 25.4 million tonnes (MT) in 2016 and the HAP waste generated in 2016 is over 2 MT while the dismantling capacity is failing to catch up; (ii) the HAP waste in southeastern provinces is notably more than in northwestern provinces by approximately 11 times; (iii) washing machines (37\%) and refrigerators (24\%) are the major types of household appliances that contribute most to HAP waste generation; (iv) PP (38\%) and PS (34\%) are the major plastic types in HAP waste. These findings can provide quantitative references for the government to arrange waste management facilities, improve recycling capacities of dismantling companies, and promote coordinated efforts from multiple stakeholders to achieve efficient waste management of HAP.}, - langid = {english}, - keywords = {Industrial Ecology,MaC Database,Material Flow Analysis,Plastics,Stocks and Flows}, - file = {/Users/fabio/Zotero/storage/KLP7MGGV/Sun et al_2022_Material Flow analysis of plastics from provincial household appliances in China.pdf;/Users/fabio/Zotero/storage/G6X2CQ8Y/S0956053X22004457.html} -} - -@article{sunUrbanHierarchybasedApproach2022, - ids = {Sun2022}, - title = {An Urban Hierarchy-Based Approach Integrating Ecosystem Services into Multiscale Sustainable Land Use Planning: {{The}} Case of {{China}}}, - author = {Sun, Xiao and Wu, Jianguo and Tang, Huajun and Yang, Peng}, - year = {2022}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {178}, - pages = {106097}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106097}, - urldate = {2021-12-10}, - keywords = {Ecosystem services,Multiscale,Urban agglomerations}, - file = {/Users/fabio/Zotero/storage/442FA2UZ/1-s2.0-S0921344921007059-main.pdf} -} - -@article{suominenGoldRibbonPuzzle2021, - title = {`{{Gold}}', `{{Ribbon}}' or `{{Puzzle}}': {{What}} Motivates Researchers to Work in {{Research}} and {{Technology Organizations}}}, - author = {Suominen, Arho and Kauppinen, Henni and Hyytinen, Kirsi}, - year = {2021}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {170}, - pages = {120882}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120882}, - urldate = {2021-06-10}, - file = {/Users/fabio/Zotero/storage/AL39LXEZ/full-text.pdf} -} - -@misc{SupplyLoopsTheir, - title = {Supply {{Loops}} and {{Their Constraints}}: {{The Industrial Ecology}} of {{Recycling}} and {{Reuse}} - {{Roland Geyer}}, {{Tim Jackson}}, 2004}, - urldate = {2022-09-25}, - howpublished = {https://journals.sagepub.com/doi/abs/10.2307/41166210?journalCode=cmra}, - file = {/Users/fabio/Zotero/storage/SLPR9FVW/41166210.html} -} - -@article{Suran2020, - title = {Frameworks for Collective Intelligence: {{A}} Systematic Literature Review}, - author = {Suran, Shweta and Pattanaik, Vishwajeet and Draheim, Dirk}, - year = {2020}, - journal = {ACM Computing Surveys}, - volume = {53}, - number = {1}, - pages = {1--36}, - issn = {15577341}, - doi = {10.1145/3368986}, - abstract = {Over the last few years, Collective Intelligence (CI) platforms have become a vital resource for learning, problem solving, decision-making, and predictions. This rising interest in the topic has to led to the development of several models and frameworks available in published literature. Unfortunately, most of these models are built around domain-specific requirements, i.e., they are often based on the intuitions of their domain experts and developers. This has created a gap in our knowledge in the theoretical foundations of CI systems and models, in general. In this article, we attempt to fill this gap by conducting a systematic review of CI models and frameworks, identified from a collection of 9,418 scholarly articles published since 2000. Eventually, we contribute by aggregating the available knowledge from 12 CI models into one novel framework and present a generic model that describes CI systems irrespective of their domains. We add to the previously available CI models by providing a more granular view of how different components of CI systems interact. We evaluate the proposed model by examining it with respect to six popular, ongoing CI initiatives available on the Web.}, - keywords = {Collective intelligence,Crowdsourcing,Human computer interaction,Systematic literature review,Web 2.0,Wisdom of crowds}, - file = {/Users/fabio/Zotero/storage/QUXI5ZAJ/Frameworks for Collective Intelligence- A Systematic Literature Review.pdf} -} - -@article{suReviewCircularEconomy2013, - title = {A Review of the Circular Economy in {{China}}: {{Moving}} from Rhetoric to Implementation}, - author = {Su, Biwei and Heshmati, Almas and Geng, Yong and Yu, Xiaoman}, - year = {2013}, - journal = {Journal of Cleaner Production}, - volume = {42}, - pages = {215--227}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2012.11.020}, - urldate = {2022-03-13}, - abstract = {Circular economy (CE) is a sustainable development strategy proposed by the central government of China, aiming to improve the efficiency of materials and energy use. This strategy, formally accepted in 2002, has been implemented and developed in a number of pilot areas in China. Scholars have produced rich studies in regard with the CE from its fundamental concept to its practical implementation. Successful enforcement of a CE can be seen as a way for China to tackle its urgent problem of environmental degradation and source scarcity. Given its importance, we provide a holistic literature review on the CE, aiming to provide a panorama of how this strategy has been developed and implemented. The review covers the concept, current practices, and assessment of the CE. To have a more numeric concept of how it has developed, we look at the performance of the CE in Dalian after its implementation of relevant policies and compare the changes with three other pilot cities, Beijing, Shanghai and Tianjin. Based on an examination of the statistical results, we identified the underlying problems and challenges for this national strategy. Finally, we offer a conclusion regarding CE's development as well as policy recommendations for future improvement. \textcopyright{} 2012 Elsevier Ltd. All rights reserved.}, - keywords = {China,Circular economy,Environmental indicators,Environmental policy,Sustainable development,Waste management} -} - -@article{Suski2020, - title = {Promoting Sustainable Consumption with {{LCA}} \textendash{} {{A}} Social Practice Based Perspective}, - author = {Suski, Paul and Speck, Melanie and Liedtke, Christa}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {283}, - pages = {125234}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125234}, - urldate = {2020-12-14}, - file = {/Users/fabio/Zotero/storage/RMZ83ER2/full-text.pdf} -} - -@article{Sußbauer2019, - title = {Corporate Strategies for Greening the Workplace: {{Findings}} from Sustainability-Oriented Companies in {{Germany}}}, - author = {S{\"u}{\ss}bauer, Elisabeth and Sch{\"a}fer, Martina}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {226}, - pages = {564--577}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.009}, - urldate = {2020-05-21} -} - -@article{SustainabilityDesigningNetworks2009, - title = {Toward {{Sustainability}} by {{Designing Networks}} of {{Technological-Ecological Systems}}}, - year = {2009}, - month = dec, - journal = {Design for Energy and the Environment}, - pages = {193--210}, - publisher = {{CRC Press}}, - doi = {10.1201/9781439809136-15}, - urldate = {2021-09-20}, - abstract = {ABSTRACT Sustainability of human activities is entirely dependent on the availability of ecosystem goods and services such as carbon sequestration, mineral and fossil resources, sunlight, biogeochemical cycles, soil formation, pollination, etc. However, most existing methods in sustainable engineering and industrial ecology ignore this crucial role played by nature. The use ofIntroduction ......................................................................................................... 168 Challenges of Sustainability ..................................................................... 168 Learning from Ecosystems ....................................................................... 169Examples of TEco-Nets ...................................................................................... 171 Coal Burning Power Plant TEco-Net ...................................................... 171 Residential TEco-Net ................................................................................. 172 Corn Ethanol TEco-Net ............................................................................. 172Designing TEco-Nets .......................................................................................... 174 Identifying Improvement Opportunities ............................................... 174 Design Approach ....................................................................................... 175Case Studies ......................................................................................................... 176 Residential TEco-Net ................................................................................. 176 Corn Ethanol TEco-Net ............................................................................. 180Conclusions .......................................................................................................... 181 Acknowledgements ............................................................................................ 182 References ............................................................................................................. 182such a narrow boundary can lead to perverse and misleading results. This paper introduces the idea of designing networks of technological systems along with their supporting ecological systems. Such technological-ecological networks (TEco-Nets), can emulate ecosystems by having closed material loops and minimum exergy loss, leading to truly self-sustaining systems. Methods for designing TEco-Nets could be developed by extending existing process synthesis and design approaches to include ecological models. Such an approach would integrate industrial ecology with ecological engineering and require collaboration between engineers and ecologists. It presents many new challenges and opportunities for process systems engineering to contribute to the sustainability of engineered systems. The idea of TEco-Nets is illustrated via several practical case studies, with focus on a typical residential system and the life cycle of corn ethanol.}, - isbn = {9780429130915} -} - -@misc{SustainabilityFreeFullText, - title = {Sustainability | {{Free Full-Text}} | {{New European Bauhaus}} for a {{Circular Economy}} and {{Waste Management}}: {{The Lived Experience}} of a {{Community Container Garden}} at the {{University}} of {{Turin}}}, - urldate = {2023-09-18}, - howpublished = {https://www.mdpi.com/2071-1050/15/2/914}, - file = {/Users/fabio/Zotero/storage/CBJEUE5J/914.html} -} - -@misc{SustainabilityMultiDisciplinaryPerspectives, - title = {Sustainability: {{Multi-Disciplinary Perspectives}} - {{Heriberto Cabezas}}, {{Urmila Diwekar}} - {{Google Books}}}, - urldate = {2021-09-20}, - howpublished = {https://books.google.fr/books?hl=en\&lr=\&id=pagzDgAAQBAJ\&oi=fnd\&pg=PP1\&dq=info:FMSAf4V14kcJ:scholar.google.com\&ots=8xrq4mCoSF\&sig=5ngpthlKWIg2AGb5U2inBRYMZyQ\&redir\_esc=y\#v=onepage\&q\&f=false} -} - -@article{SustainableValueCreation2021, - title = {Sustainable Value Creation from a Capability Perspective: {{How}} to Achieve Sustainable Product Design}, - year = {2021}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {312}, - pages = {127552}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.127552}, - urldate = {2021-06-10} -} - -@article{susurTransitionsFrameworkCircular, - title = {A Transitions Framework for Circular Business Models}, - author = {Susur, Ebru and Engwall, Mats}, - journal = {Journal of Industrial Ecology}, - volume = {n/a}, - number = {n/a}, - issn = {1530-9290}, - doi = {10.1111/jiec.13363}, - urldate = {2023-01-15}, - abstract = {The concepts ``circular business models'' and ``transitions towards a circular economy'' have become modern-day buzzwords. Yet, an understanding of the interplay between these two concepts remains unclear. This paper proposes a conceptual framework that illustrates the innovation mechanisms enhancing circular business models emerging within the context of transitions towards a circular economy. The paper follows a two-step methodology. First, a theoretical framing is proposed by adopting insights from transitions studies. Second, a systematic literature review is employed. The review synthesizes the selected literature tracing the proposed framing in the previously published research. Finally, a transitions framework for circular business models is proposed. This framework suggests future lines of research to support its plausibility. Moreover, it offers prescriptive help to managers, entrepreneurs, policymakers, and other social actors enabling them to make informed decisions about and take innovative actions for circular business models in specific contexts.}, - copyright = {\textcopyright{} 2022 The Authors. Journal of Industrial Ecology published by Wiley Periodicals LLC on behalf of International Society for Industrial Ecology.}, - langid = {english}, - keywords = {business model innovation,circular business model,circular economy,industrial ecology,sustainability transitions,systematic literature review}, - file = {/Users/fabio/Zotero/storage/LFI296YD/Susur y Engwall - A transitions framework for circular business mode.pdf;/Users/fabio/Zotero/storage/Q9IP9MKF/jiec.html} -} - -@article{Svarc2019, - title = {Regional Innovation Culture in Innovation Laggard: {{A}} Case of {{Croatia}}}, - author = {{\v S}varc, Jadranka and La{\v z}njak, Jasminka and Dabi{\'c}, Marina}, - year = {2019}, - month = aug, - journal = {Technology in Society}, - volume = {58}, - pages = {101123}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.03.006}, - urldate = {2020-05-21}, - abstract = {The aim of the article is to explore the possible impacts of culture on in-country regional differences in innovation capacities and propensity to entrepreneurship using the Hofstede's model of national culture. There is a number of studies that proved the profound influence of culture on innovation and entrepreneurship capacities. By contrast to cross-country cultural studies, the cross-regional cultural research on innovation and entrepreneurship within a country, especially in Europe, is an under-researched area. The research is based on national survey data (N = 1000) in Croatia, the country that suffers from weaknesses in innovation and entrepreneurial capacities with great regional development disparities. This suggests it as a good example for exploring regional cultural differences. The research proved that Croatian regions are culturally heterogonous but the correlation between regional culture and regional entrepreneurship and innovation capacities was not found. Hofstede's model appeared as having little practical value for strategic management and development and suggest that other factors, presumably more structural than cultural, that mediate poor innovation and entrepreneurship performance should be taken into account. The article contributed to the conceptualization and empirical research of regional innovation culture and provide evidence of the limited explanatory power of Hofstede's model in explaining regional differences by cultural factors.}, - keywords = {Croatia,Entrepreneurship,Hofstede's model,Innovation culture,Innovation laggards,Regional development} -} - -@article{Svensson2019, - title = {Management Control in Circular Economy. {{Exploring}} and Theorizing the Adaptation of Management Control to Circular Business Models}, - author = {Svensson, Nikki and Funck, Elin K.}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {233}, - pages = {390--398}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.089}, - urldate = {2020-03-22}, - abstract = {A growing body of literature argues that an organization's management control needs to adapt as an organization changes business model or strategy for the management control to be consistent with the organization's objectives and strategies. Nevertheless, scepticism has been raised about the role of management controls in promoting sustainability or the circular economy within organizations. Based on the management control framework of Malmi and Brown (2008), this paper explores empirically how organizations work with the circular economy and how management control has adapted to the business model. The results show that the circular economy can be practiced in different ways and that the adaptation and application of the circular economy affects the whole management control package. The paper identifies the importance of cultural control and long-range planning for communicating circular values and spreading a culture based on circular principles. However, regardless of what circular strategies are used, circular work tends to steer attention to the early phases of the product life cycle. For management controls this means that action plans, cost accounting, and investment appraisals must reflect a higher level of detail and a longer time horizon. The paper highlights how this is associated with challenges for traditional management controls.}, - keywords = {Circular economy,Circular strategy,Management control} -} - -@article{Syam2011, - title = {Rapid Prototyping and Rapid Manufacturing in Medicine and Dentistry}, - author = {Syam, Wahyudin P. and a. Mannan, M. and {Al-Ahmari}, a. M.}, - year = {2011}, - month = jun, - journal = {Virtual and Physical Prototyping}, - volume = {6}, - number = {2}, - pages = {79--109}, - issn = {1745-2759}, - doi = {10.1080/17452759.2011.590388}, - urldate = {2014-02-02}, - file = {/Users/fabio/Zotero/storage/K53NQR3E/Syam, Mannan, Al-Ahmari - 2011 - Rapid prototyping and rapid manufacturing in medicine and dentistry.pdf} -} - -@misc{SyllabusCIU176TIA108, - title = {Syllabus for {{CIU176}} / {{TIA108 Prototyping}} in Interaction Design}, - urldate = {2023-07-21}, - howpublished = {https://chalmers.instructure.com/courses/25338/assignments/syllabus}, - file = {/Users/fabio/Zotero/storage/4PIJZ5L5/syllabus.html} -} - -@article{Symes2012, - title = {Integrated {{3D-printed}} Reactionware for Chemical Synthesis and Analysis.}, - author = {Symes, Mark D and Kitson, Philip J and Yan, Jun and Richmond, Craig J and Cooper, Geoffrey J T and Bowman, Richard W and Vilbrandt, Turlif and Cronin, Leroy}, - year = {2012}, - month = may, - journal = {Nature chemistry}, - volume = {4}, - number = {5}, - eprint = {22522253}, - eprinttype = {pubmed}, - pages = {349--54}, - publisher = {{Nature Publishing Group}}, - issn = {1755-4349}, - doi = {10.1038/nchem.1313}, - urldate = {2014-01-22}, - abstract = {Three-dimensional (3D) printing has the potential to transform science and technology by creating bespoke, low-cost appliances that previously required dedicated facilities to make. An attractive, but unexplored, application is to use a 3D printer to initiate chemical reactions by printing the reagents directly into a 3D reactionware matrix, and so put reactionware design, construction and operation under digital control. Here, using a low-cost 3D printer and open-source design software we produced reactionware for organic and inorganic synthesis, which included printed-in catalysts and other architectures with printed-in components for electrochemical and spectroscopic analysis. This enabled reactions to be monitored in situ so that different reactionware architectures could be screened for their efficacy for a given process, with a digital feedback mechanism for device optimization. Furthermore, solely by modifying reactionware architecture, reaction outcomes can be altered. Taken together, this approach constitutes a relatively cheap, automated and reconfigurable chemical discovery platform that makes techniques from chemical engineering accessible to typical synthetic laboratories.}, - pmid = {22522253}, - keywords = {Automation,Chemistry Techniques,Printing,Software,Synthetic,Synthetic: economics,Synthetic: instrumentation,Synthetic: methods}, - file = {/Users/fabio/Zotero/storage/BSHV23TX/Integrated 3D-printed reactionware for chemical synthesis and analysis.pdf} -} - -@article{Syrgiannis2019, - title = {Inner {{Processes}} of {{Creation}} towards Awareness of Own Worth for Sustainable Proposals}, - author = {Syrgiannis, Christine and Zabaniotou, Anastasia and Fazenda, Ivani}, - year = {2019}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {230}, - pages = {767--774}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.150} -} - -@article{syropoulosOurResponsibilityFuture2023, - title = {Our Responsibility to Future Generations: {{The}} Case for Intergenerational Approaches to the Study of Climate Change}, - shorttitle = {Our Responsibility to Future Generations}, - author = {Syropoulos, Stylianos and Markowitz, Ezra}, - year = {2023}, - month = may, - journal = {Journal of Environmental Psychology}, - volume = {87}, - pages = {102006}, - issn = {0272-4944}, - doi = {10.1016/j.jenvp.2023.102006}, - urldate = {2023-05-01}, - abstract = {In this short communication, we emphasize the need to study intergenerational mechanisms for climate action. We highlight that much research to date has focused on psychological factors related to political ideology and partisan identity, two strong predictors of proenvironmental action. We propose that intergenerational processes can be effectively harnessed to promote climate change mitigation and adaptation while largely avoiding issues of partisanship and polarization. We conclude by outlining potential future investigations on intergenerational approaches for the study of climate change.}, - langid = {english}, - keywords = {Climate change,Future generations,Intergenerational decision-making,Personal legacy,Political ideology}, - file = {/Users/fabio/Zotero/storage/V2X2FFWQ/Syropoulos_Markowitz_2023_Our responsibility to future generations.pdf;/Users/fabio/Zotero/storage/7BFP8A7Y/S0272494423000543.html} -} - -@article{System2006, - title = {System {{Dynamics Review}}}, - author = {System, In and Review, Dynamics}, - year = {2006}, - journal = {Syst Dyn Rev}, - volume = {22}, - number = {22}, - pages = {2006}, - doi = {10.1002/sdr}, - abstract = {Homepage of the Journal 'System Dynamics Review'}, - file = {/Users/fabio/Zotero/storage/6P2DD6H7/Making system dynamics useful- a personal memoir.pdf} -} - -@article{szocikWhySpaceExploitation2023, - title = {Why Space Exploitation May Provide Sustainable Development: {{Climate}} Ethics and the Human Future as a Multi-Planetary Species}, - shorttitle = {Why Space Exploitation May Provide Sustainable Development}, - author = {Szocik, Konrad and Reiss, Michael J.}, - year = {2023}, - month = mar, - journal = {Futures}, - volume = {147}, - pages = {103110}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2023.103110}, - urldate = {2023-02-09}, - abstract = {Depletion of resources on Earth, super-exploitation and climate change challenge human survival on Earth. As far as humans are a single-planetary species, our further survival seems to be seriously threatened by these on-going pressures. In this paper, we discuss ethical issues arising from the possibility of space exploitation and space colonisation as remedies for a forthcoming climate catastrophe. We argue that it would be unwise to presume that in the time span required humans will change their behaviours and/or develop new technologies so that irreversible, harmful climate change on Earth is averted. Space exploration and exploitation are considered as a natural continuation of the human attempt to explore and exploit. We conclude that space colonisation may provide a path to the sustainable development of humanity and that it would be remiss of humans not to explore this possibility seriously.}, - langid = {english}, - keywords = {Climate change,Space ethics,Space exploitation,Space policy,Sustainability}, - file = {/Users/fabio/Zotero/storage/A2NNRWZP/Szocik y Reiss - 2023 - Why space exploitation may provide sustainable dev.pdf;/Users/fabio/Zotero/storage/D4X7B5R8/S0016328723000150.html} -} - -@article{Tabatabaee2019, - title = {An Assessment Model of Benefits, Opportunities, Costs, and Risks of Green Roof Installation: {{A}} Multi Criteria Decision Making Approach}, - author = {Tabatabaee, Sanaz and Mahdiyar, Amir and Durdyev, Serdar and Mohandes, Saeed Reza and Ismail, Syuhaida}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117956}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117956} -} - -@article{Tajbakhsh2019, - title = {Sustainability Performance of Countries Matters: {{A}} Non-Parametric Index}, - author = {Tajbakhsh, Alireza and Shamsi, Azam}, - year = {2019}, - journal = {Journal of Cleaner Production}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.189}, - file = {/Users/fabio/Zotero/storage/72T9Y7I8/Sustainability performance of countries matters- A non-parametric index.pdf} -} - -@article{takalaShapingConceptBioeconomy2019, - title = {Shaping the Concept of Bioeconomy in Participatory Projects \textendash{} {{An}} Example from the Post-Graduate Education in {{Finland}}}, - author = {Takala, Tuomo and Tikkanen, Jukka and Haapala, Antti and Pitk{\"a}nen, Sari and Torssonen, Piritta and Valkeavirta, Rosa and P{\"o}ykk{\"o}, Tapani}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {221}, - pages = {176--188}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.007}, - urldate = {2020-06-18}, - abstract = {Evolving complex concepts, such as bioeconomy, cannot be applied without selecting (consciously or unconsciously) some definitions and excluding others. This process of selection may have a considerable impact on how bioeconomy is understood. This paper presents how the concept of bioeconomy took shape in a participatory development project that created foundations for new professional specialisation studies within the Finnish bioeconomy. Written documents (n = 21), produced in different phases of the project, were analysed with qualitative content analysis to find out how bioeconomy was A) understood as an activity, and B) conceptually linked with different global meta-discourses. Bioeconomy was primarily understood as an intensive use of diverse biomasses within a forest cluster, agriculture, the food industry, waste management and the energy sector, whereas many other bioeconomy sectors were marginalised or excluded. The idea that biomasses should be saved was very rare, and the concepts that prioritise some biomass uses over others, such as the cascade principle, were excluded. Bioeconomy itself was understood as a societally and globally influential new way of thinking i.e. as a meta-discourse. Strong associations were also made to nationalistic and statist meta-discourses. Conceptual transformation during the project was most distinct in the sustainable development meta-discourse: sustainability turned from a self-evident characteristic of bioeconomy into a consciously reflected and desirable goal. The results illustrate how a common consensus of bioeconomy is built through exclusion and inclusion in a participatory development project. Project organisers should be conscious about this process and explicitly state how and why some aspects, actors and activities are emphasised while others are downplayed or excluded in their bioeconomy projects. Only then we can create far-reaching policies and considered actions to guide societies toward the desired and defined future.}, - keywords = {Adult education,Bioeconomy,Meta-discourse,Sustainability} -} - -@article{Talbot2007, - title = {Closed-Loop Supply Chain Activities and Derived Benefits in Manufacturing {{SMEs}}}, - author = {Talbot, Stephane and Lefebvre, Elisabeth and Lefebvre, Louis Andre}, - year = {2007}, - journal = {Journal of Manufacturing Technology Management}, - volume = {18}, - number = {6}, - eprint = {1011.1669v3}, - pages = {627--658}, - issn = {1741038X}, - doi = {10.1108/17410380710763831}, - abstract = {Purpose - Closing the loop at the end of products' useful life is earning increased attention from industry and academia. The recent or upcoming enactment of regulations regarding the management of end-of-life products is forcing manufacturers to consider strategies to increase the residual value of the products they make. Facilitating the residual value extraction process for end-of-life products is a challenging issue deserving investigation. This paper proposes to investigate this issue. Design/methodology/approach - This paper analyzes empirical evidence from a sample of 205 environmentally responsive SMEs operating in the fabricated metal products and electric/electronic products industries. A coherent research model is developed which classifies the closed-loop supply chain (CLSC) activities along two dimensions, the forward and reverse supply chains. Findings - This first proposed taxonomy has been shown to be relevant for both sectors. The results also demonstrate that firms' abilities to implement CLSC environmental initiatives vary in their intensity and in their locus along the product value chain. Furthermore, benefits derived from these initiatives seem to vary according to the strategy favored by the firms. Originality/value - This research is valuable for those firms interested in implementing CLSC strategies in a synergistic manner with their forward supply chain. \textcopyright{} Emerald Group Publishing Limited.}, - archiveprefix = {arxiv}, - isbn = {1741-038X}, - pmid = {27235000}, - keywords = {Globalization,Small to medium-sized enterprises,Supplier relations,Supply chain management,United Kingdom}, - file = {/Users/fabio/Zotero/storage/FAEZ7YZU/Closed-loop supply chain activities and derived benefits in manufacturing SMEs.pdf} -} - -@article{Taleb2018, - title = {How Much Data Do You Need? {{An}} Operational, Pre-Asymptotic Metric for Fat-Tailedness}, - author = {Taleb, Nassim Nicholas}, - year = {2018}, - month = dec, - journal = {International Journal of Forecasting}, - issn = {01692070}, - doi = {10.1016/j.ijforecast.2018.10.003} -} - -@article{Tam2019, - title = {Understanding the Psychology {{X}} Politics Interaction behind Environmental Activism: {{The}} Roles of Governmental Trust, Density of Environmental {{NGOs}}, and Democracy}, - author = {Tam, Kim Pong}, - year = {2019}, - month = jul, - journal = {Journal of Environmental Psychology}, - pages = {101330}, - publisher = {{Academic Press}}, - issn = {15229610}, - doi = {10.1016/j.jenvp.2019.101330}, - urldate = {2020-05-21}, - abstract = {When explaining engagement in environmental activism, previous psychological studies have mostly focused on motivational factors. In this investigation, considering that environmental activism is political in essence, I argue that the effect of motivations is moderated by the political context people face. Drawing upon political science theories, I hypothesize that psychological motivations (environmental concern and postmaterialist values) are more strongly associated with environmental activism engagement among individuals who trust the government less and in societies with more facilitative political opportunity structures (higher density of environmental NGOs and more democracy). With a series of multilevel analyses of data from 31 countries, I found robust support to these hypotheses. The significance of considering the psychology X politics interaction behind human responses to environmental issues is discussed.}, - keywords = {Democracy,Environmental activism,Environmental concern,Governmental trust,Political opportunity,Postmaterialism}, - file = {/Users/fabio/Zotero/storage/I2JL2ZQT/full-text.pdf} -} - -@article{tambeBridgingSciencePolicy2023, - title = {Bridging Science, Policy and Practice for Sustainability: {{Towards}} a Conceptual Framework}, - shorttitle = {Bridging Science, Policy and Practice for Sustainability}, - author = {Tambe, Sandeep and Ballal, Aabha and Tomar, Richa and Wyborn, Carina and DeFries, Ruth and Ganguly, Sunayana and Scarlett, Lynn}, - year = {2023}, - month = jul, - journal = {Environmental Science \& Policy}, - volume = {145}, - pages = {208--216}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2023.04.007}, - urldate = {2023-05-10}, - abstract = {Sustainability issues at the interface of science, policy and practice are complex and in an urgent need of sound interventions. Producing science without assessing the nature of the conservation challenge can result in science getting undervalued and even ignored. While several models have been developed, they do not provide a blueprint for action. Without adequate guidance, the approaches adopted by stakeholders may be out of touch with the nature of the problem and may result in suboptimal outcomes. What are the types of sustainability challenges in the place-based, knowledge-action interface and how to tackle them? To address this gap, we build on scholarly work, to classify sustainability challenges into four idealized categories: namely, knowledge gap, multifaceted, hegemonic alliance and wicked problem. Then by assimilating insights from sustainability science studies we show that it is possible to suggest a suitable approach to these problems. Using this framework, we analyze case studies from India and show how it can enhance the ability of actors to tackle real-life sustainability issues. The unique contribution of this paper lies in constructing a schematic process for diagnosis and intervention when confronted with complex sustainability challenges. Future studies can further test, expand and refine this framework to make it more comprehensive and practice-based.}, - langid = {english}, - keywords = {Co-production,Multi-disciplinary,Power dynamics,Science-policy-practice interface,Tradeoffs,Wicked problem}, - file = {/Users/fabio/Zotero/storage/2W3WPMKR/Tambe et al. - 2023 - Bridging science, policy and practice for sustaina.pdf;/Users/fabio/Zotero/storage/8UZGG8RA/S1462901123001089.html} -} - -@article{tamCrossculturalEnvironmentalPsychology2020, - title = {Towards Cross-Cultural Environmental {{Psychology}}:{{A}} State-of-the-Art Review and Recommendations}, - author = {Tam, Kim-Pong and Milfont, Taciano L.}, - year = {2020}, - month = aug, - journal = {Journal of Environmental Psychology}, - pages = {101474}, - publisher = {{Academic Press}}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2020.101474}, - urldate = {2020-08-13}, - file = {/Users/fabio/Zotero/storage/M5XVFSXB/full-text.pdf} -} - -@article{Tan2018, - title = {Co-Innovation: A Review and Conceptual Framework}, - author = {Tan, Jacob Donald and Saragih, Harriman Samuel}, - year = {2018}, - journal = {International Journal of Business Innovation and Research}, - volume = {17}, - number = {3}, - pages = {361}, - issn = {1751-0252}, - doi = {10.1504/ijbir.2018.10016527}, - abstract = {This paper investigates the previous theoretical and empirical studies regarding the current philosophical understandings of co-innovation and subsequently suggests a theoretical framework that exhibits the analytical pillars and the possible outputs of this notion in practice through various case studies. The analysis of this study involved examining secondary sources of scholarly literature by discussing the conceptual understandings and empirical findings on the concepts of co-innovation in several academic databases. Co-innovation is defined as a shared work of generating innovative and exceptional design conducted by various actors from firms, customers, and collaborating partners. This study proposes that there are five principal elements within the idea of co-innovation: collaboration, coordination, co-creation, convergence and complementary. The possible outputs of co-innovation can either be a new business model, new customer base, new customer value, new value chain, or new products and services. This paper attempts to evaluate the emerging concept of co-innovation and propose a conceptual framework rooted in various authentic business cases and theoretical literature.}, - file = {/Users/fabio/Zotero/storage/B7GKWFIV/Co-innovation- A review and conceptual framework.pdf} -} - -@article{Tan2020, - title = {Introduction to the Special Issue on ``{{Grassroots}} and Inclusive Innovations: {{Conceptualizing}} Synergies and Complementarities''}, - author = {Tan, Wee-Liang and Gangopadhyay, Partha and Hauptman, Oscar}, - year = {2020}, - month = oct, - journal = {Technological Forecasting and Social Change}, - number = {xxxx}, - pages = {120409}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120409}, - file = {/Users/fabio/Zotero/storage/83T5GSRJ/Social Innovation.pdf} -} - -@article{tanAcceleratingPlasticCircularity2023, - title = {Accelerating {{Plastic Circularity}}: {{A Critical Assessment}} of the {{Pathways}} and {{Processes}} to {{Circular Plastics}}}, - shorttitle = {Accelerating {{Plastic Circularity}}}, - author = {Tan, Jovan and Jia, Shuyue and Ramakrishna, Seeram}, - year = {2023}, - month = may, - journal = {Processes}, - volume = {11}, - number = {5}, - pages = {1457}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2227-9717}, - doi = {10.3390/pr11051457}, - urldate = {2023-08-30}, - abstract = {Achieving plastic circularity is imperative to using plastics without adverse effects. Today, only 9\% of global plastic waste is recycled, signifying the need for more substantial advancements to accelerate our progress toward achieving plastic circularity. This article contributes to our collective efforts to accelerate plastic circularity by critically assessing the state-of-the-art, gaps, and outlook of the pathways and processes to circular plastics. It employs qualitative methods to derive new insights that empower scholars and practitioners to prescribe effective strategies to shape the future of plastic circularity and its research agenda. This article concludes that today's circularity pathways for plastics are not economically viable, significantly hindering their scalability and widespread adoption. It further validates that focusing on the product design and effectiveness of the available collection and sorting systems can considerably improve our progress in achieving plastic circularity.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {chemical recycling,circular economy,circular plastics,circularity,life cycle,mechanical recycling,plastics,sustainability,sustainable development}, - file = {/Users/fabio/Zotero/storage/A4ZUTV8G/Tan et al. - 2023 - Accelerating Plastic Circularity A Critical Asses.pdf} -} - -@article{tanAdditiveManufacturingCOVID192021, - title = {Additive Manufacturing in {{COVID-19}}: Recognising the Challenges and Driving for Assurance}, - author = {Tan, Hong Wei and Choong, Yu Ying Clarrisa}, - year = {2021}, - month = sep, - journal = {https://doi.org/10.1080/17452759.2021.1975882}, - pages = {1--6}, - publisher = {{Taylor \& Francis}}, - doi = {10.1080/17452759.2021.1975882}, - urldate = {2021-09-21}, - abstract = {Additive manufacturing (AM) is once again at the forefront of global attention during the COVID-19 pandemic. The AM technology has demonstrated operational resilience and provided a wide spectrum o...}, - keywords = {3D printing,additive manufacturing,certification,COVID-19,qualification,quality assurance,standards}, - file = {/Users/fabio/Zotero/storage/L3N88MEE/full-text.pdf} -} - -@article{tanCharacteristicsOccurrenceFate2022, - title = {Characteristics, Occurrence and Fate of Non-Point Source Microplastic Pollution in Aquatic Environments}, - author = {Tan, Yanping and Dai, Jiangyu and Wu, Xiufeng and Wu, Shiqiang and Zhang, Jianmin}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {341}, - pages = {130766}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.130766}, - urldate = {2022-03-08}, - abstract = {Microplastics (MPs) entering aquatic environments from non-point sources are receiving global attentions and are difficult to manage. To control the accumulation of MPs in aquatic environments, it is necessary to investigate their abundances, characteristics and removal methods. Although previous studies had summarized characteristics and removal of MPs in stormwaters, there is still a large knowledge gap about the occurrence and fate of non-point source MPs in aquatic environments. The detection methods, characteristics and abundances of non-point source MPs in aquatic environments were reviewed. Lack of reliable and uniform detection methods is the main challenge for present studies. Considering the critical need to focus on water-energy-environment nexus, constructed wetland (CW) was put forward as a sustainable and efficient treatment technology to remove non-point source MPs. Removal performances of MPs in different structural components of CWs were also critically compared. According to literatures, the magnitude of abundances for non-point source MPs in water samples ranges from 10-1 to 102 items L-1. Fibers, fragments (including tire/road wear), films are dominant shapes of non-point source MPs, while polyethylene, polypropylene, polyethylene terephthalate, and polystyrene are main polymer types. The main measures to remove non-point source MPs are precipitation, filtration and ingestion in CWs. Compared with other shapes, the removal efficiency of fibers in CWs is relatively lower. Most of removed MPs always remain at the entrance of CWs, which may cause clogging of substrates. Vegetation and organisms in CWs may enhance the removal efficiency of MPs by capturing and ingesting as well as preventing substrates clogging. Additionally, possible research gaps and key directions are also given for future considerations. Standardization and efficient treatment materials are future research priorities.}, - keywords = {Constructed wetlands,Microplastics (MPs),Non-point source,Substrates} -} - -@article{Tang2015, - title = {Effect of {{Powder Reuse Times}} on {{Additive Manufacturing}} of {{Ti-6Al-4V}} by {{Selective Electron Beam Melting}}}, - author = {Tang, H. P. and Qian, M. and Liu, N. and Zhang, X. Z. and Yang, G. Y. and Wang, J.}, - year = {2015}, - month = mar, - journal = {JOM}, - volume = {67}, - number = {3}, - pages = {555--563}, - issn = {1047-4838}, - doi = {10.1007/s11837-015-1300-4}, - abstract = {An advantage of the powder-bed-based metal additive manufacturing (AM) processes is that the powder can be reused. The powder reuse or recycling times directly affect the affordability of the additively manufactured parts, especially for the AM of titanium parts. This study examines the influence of powder reuse times on the characteristics of Ti-6Al-4V powder, including powder composition, particle size distribution (PSD), apparent density, tap density, flowability, and particle morphology. In addition, tensile samples were manufactured and evaluated with respect to powder reuse times and sample locations in the powder bed. The following findings were made from reusing the same batch of powder 21 times for AM by selective electron beam melting: (i) the oxygen (O) content increased progressively with increasing reuse times but both the Al content and the V content remained generally stable (a small decrease only); (ii) the powder became less spherical with increasing reuse times and some particles showed noticeable distortion and rough surfaces after being reused 16 times; (iii) the PSD became narrower and few satellite particles were observed after 11 times of reuse; (iv) reused powder showed improved flowability; and (v) reused powder showed no measurable undesired influence on the AM process and the samples exhibited highly consistent tensile properties, irrespective of their locations in the powder bed. The implications of these findings were discussed.}, - file = {/Users/fabio/Zotero/storage/QUVSTEHY/Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting.pdf} -} - -@article{Tang2016, - title = {A Framework to Reduce Product Environmental Impact through Design Optimization for Additive Manufacturing}, - author = {Tang, Yunlong and Mak, Kieran and Zhao, Yaoyao Fiona}, - year = {2016}, - journal = {Journal of Cleaner Production}, - volume = {137}, - pages = {1560--1572}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2016.06.037}, - abstract = {Additive Manufacturing (AM) also known as 3D printing technology has drawn increasing attention from the industrial world. It provides the capability of freeform fabrication to achieve high complexity as well as significant reduction of a supply chain which further enhances the profit margin for manufacturers. However, while claiming on the advantage on the environmental aspect, there is very limited research on the environmental impact of AM technologies. Most of existing environmental assessment models for AM processes are developed based on a general Life Cycle Assessment (LCA) framework. Due to the limited scope and boundary of these models, design results are usually taken as the input. These existing models may work well for traditional manufacturing processes. However, when it comes to AM process, these methods are no longer valid, since the design freedoms which may have a great impact on sustainability are always neglected. To deal with this issue, a general framework which can integrate a design stage in LCA for minimizing the product environmental impact of AM process in particular for binder-jetting process is proposed. The detailed description of each major stage of the proposed framework is presented. This framework has been applied to evaluate the environmental impact of fabricating an engine bracket by binder-jetting process. In this case study, a comparison of environmental impact between CNC and binder-jetting fabrication process is made. The result shows that binder-jetting consumes significantly less energy and produce less CO2 to produce a topologically optimized part than CNC milling for the same product. This case study demonstrates a key role of design optimization in the proposed framework. This proposed framework can be further modified for other typical AM process in the future.}, - isbn = {4025594390}, - pmid = {24893311}, - keywords = {Additive manufacturing,Binder-jetting,Design optimization,Environmental impact,LCA,Sustainability}, - file = {/Users/fabio/Zotero/storage/GPSLD8SZ/A framework to reduce product environmental impact through design optimization for additive manufacturing.pdf} -} - -@article{Tang2019, - title = {Do Peer Firms Affect Corporate Social Performance?}, - author = {Tang, Pengcheng and Fu, Shuke and Yang, Shuwang}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118080}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118080} -} - -@article{tanguay-riouxMixedModelingApproach2022, - title = {Mixed Modeling Approach for Mechanical Sorting Processes Based on Physical Properties of Municipal Solid Waste}, - author = {{Tanguay-Rioux}, Fabrice and Spreutels, Laurent and H{\'e}roux, Martin and Legros, Robert}, - year = {2022}, - month = may, - journal = {Waste Management}, - volume = {144}, - pages = {533--542}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.04.025}, - urldate = {2022-05-23} -} - -@article{tanguay-riouxPhysicalPropertiesRecyclable2021, - title = {Physical Properties of Recyclable Materials and Implications for Resource Recovery}, - author = {{Tanguay-Rioux}, Fabrice and H{\'e}roux, Martin and Legros, Robert}, - year = {2021}, - month = dec, - journal = {Waste Management}, - volume = {136}, - pages = {195--203}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.10.007}, - urldate = {2021-11-07} -} - -@techreport{Tanguay2013, - title = {Des Laboratoires Vivants Pour Des Territoires Innovants}, - author = {Tanguay, Vincent and Gis{\`e}le, Bertrand}, - year = {2013}, - pages = {1--24}, - address = {{Montr\'eal}}, - institution = {{Cefrio}}, - keywords = {CEFRIO,ENoLL,laboratoires vivants,living labs} -} - -@article{Tanikella2017, - title = {Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication {{3D}} Printing}, - author = {Tanikella, Nagendra G. and Wittbrodt, Ben and Pearce, Joshua M.}, - year = {2017}, - month = may, - journal = {Additive Manufacturing}, - volume = {15}, - pages = {40--47}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2017.03.005}, - abstract = {3D printing functional parts with known mechanical properties is challenging using variable open source 3D printers. This study investigates the mechanical properties of 3D printed parts using a commercial open-source 3D printer for a wide range of materials. The samples are tested for tensile strength following ASTM D638. The results are presented and conclusions are drawn about the mechanical properties of various fused filament fabrication materials. The study demonstrates that the tensile strength of a 3D printed specimen depends largely on the mass of the specimen, for all materials. Thus, to solve the challenge of unknown print quality on mechanical properties of a 3D printed part a two step process is proposed, which has a reasonably high expectation that a part will have tensile strengths described in this study for a given material. First, the exterior of the print is inspected visually for sub-optimal layers. Then, to determine if there has been under-extrusion in the interior, the mass of the sample is measured. This mass is compared to the theoretical value using densities for the material and the volume of the object. This two step process provides a means to assist low-cost open-source 3D printers expand the range of object production to functional parts.}, - keywords = {3D printing,Distributed manufacturing,Mechanical properties,Polymers,RepRap}, - file = {/Users/fabio/Zotero/storage/3AVR6QKN/Tensile strength of commercial polymer materials for fused filament fabrication 3D printing.pdf;/Users/fabio/Zotero/storage/DES3JVRB/Tensile strength of commercial polymer materials for fused filament fabrication 3D printing(2).pdf} -} - -@article{Tanveer2019, - title = {Effect of Variable Infill Density on Mechanical Behaviour of 3-{{D}} Printed {{PLA}} Specimen: An Experimental Investigation}, - author = {Tanveer, Md. Qamar and Haleem, Abid and Suhaib, Mohd}, - year = {2019}, - month = dec, - journal = {SN Applied Sciences}, - volume = {1}, - number = {12}, - pages = {1--12}, - publisher = {{Springer Science and Business Media LLC}}, - issn = {2523-3963}, - doi = {10.1007/s42452-019-1744-1}, - urldate = {2021-01-15}, - abstract = {Fused deposition modelling (FDM) is one of the additive manufacturing technique, widely accepted due to its `easy to use' technology. The set process parameters during FDM printing, affect the mechanical behaviour of the built part. The objective of this study is to investigate the effect of variable infill density on the tensile and impact strength of polylactic acid (PLA) specimens printed by an open-source 3D printer. The tensile and impact test specimens are printed according to the DIN EN ISO 527-2, ASTM D256 (Izod) and ASTM D6110 (Charpy) respectively. A computerised tensometer and impactometer used to conduct the tensile and the impact strength of the PLA specimens. The tensile strength with the highest value of 46.3 N/mm2 and the lowest value of 29.9 N/mm2 are found. The results demonstrate that the specimens with varying infill density exhibit better tensile strength than the specimens with single infill density. The varying infill density specimens weigh lighter as compared to single infill density, which saves the raw material. The highest Charpy and lowest Izod strength found to be 4.72 kJ/m2 and 1.7 kJ/m2. The impact test experimental data establishes that impact strength is directly proportional to the infill density. Thus, by varying the infill density, there is a reduction in the impact strength of the printed specimens.}, - keywords = {Applied and Technical Physics,Chemistry/Food Science,Earth Sciences,Engineering,Environment,general,Materials Science} -} - -@article{tanzerResourcesConservationRecycling2020, - title = {Resources , {{Conservation}} \& {{Recycling Complex}} System , Simple Indicators : {{Evaluation}} of Circularity and Statistical Entropy as Indicators of Sustainability in {{Austrian}} Nutrient Management}, - author = {Tanzer, Julia}, - year = {2020}, - month = nov, - journal = {Resources, Conservation \& Recycling}, - volume = {162}, - number = {May}, - pages = {104961}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2020.104961}, - urldate = {2020-07-20}, - keywords = {material flow analysis,resource interaction}, - file = {/Users/fabio/Zotero/storage/K4S3MAZL/full-text.pdf} -} - -@article{taqiWhatAreChallenges2022, - title = {What Are the Challenges That Make the Journey towards Industrial Symbiosis Complicated?}, - author = {Taqi, Hasin Md Muhtasim and Meem, Erin Jahan and Bhattacharjee, Prattusha and Salman, Sheak and Ali, Syed Mithun and Sankaranarayanan, Bathrinath}, - year = {2022}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {370}, - pages = {133384}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133384}, - urldate = {2022-08-15}, - abstract = {Industrial symbiosis (IS) is an emerging approach that deals with the cooperative sharing of various firms' resources (e.g., energy, wastes, materials by-products) and helps achieve sustainability in the supply chain. The journey towards industrial symbiosis (IS) requires firms to change from conventional linear business models to circular business models. However, transforming to circular business models is complex; several interrelated challenges hinder the journey towards IS. Therefore, the goal of this study is to model the challenges to IS in an emerging economy context. The decision-making trial and evaluation laboratory (DEMATEL) technique has been utilized in order to accomplish this goal. Findings reveal that, the organizational challenges are most significant in the journey towards IS. Furthermore, the findings help practitioners implement policies through understanding the causal relationships among the addressed challenges.}, - langid = {english}, - keywords = {Challenges,Circular economy,DEMATEL,Emerging economy,Industrial symbiosis}, - file = {/Users/fabio/Zotero/storage/C69XIR7W/Taqi et al_2022_What are the challenges that make the journey towards industrial symbiosis.pdf;/Users/fabio/Zotero/storage/P4FC2VLF/S0959652622029687.html} -} - -@article{Tara2014, - title = {{{MakeAbility}}: {{Creating Accessible Makerspace Events}} in a {{Public Library}}}, - author = {Brady, Tara and Salas, Camille and Nuriddin, Ayah and Rodgers, Walter and Subramaniam, Mega}, - year = {2014}, - journal = {Public Library Quarterly}, - volume = {33}, - number = {4}, - pages = {330--347}, - issn = {0161-6846, 0161-6846}, - doi = {http://dx.doi.org/10.1080/01616846.2014.970425}, - abstract = {This exploratory article describes the planning and execution of an accessible library makerspace event for people with disabilities (specifically, patrons with cognitive and visual impairments). We begin with a literature review on the maker movement and a description of makerspaces in libraries. We highlight the insufficient focus on making these makerspaces accessible for people with all abilities. Next, we describe the design of the makerspace event that we implemented at a local public library and extrapolate the on-the-go modifications that we made for patrons with cognitive and visual impairment who attended the event. Based on the lessons learned through the implementation of this event, we provide suggestions for creating accessible makerspace events in libraries, including concrete recommendations on the design of the stations.}, - keywords = {Perry L. Glanzer}, - file = {/Users/fabio/Zotero/storage/WAIXSUBS/m-api-5efb97ce-4d48-4ffd-1eb0-99742ad20e07.pdf} -} - -@article{taubeIncreasingPeopleAcceptance2021, - title = {Increasing {{People}}'s {{Acceptance}} of {{Anthropogenic Climate Change}} with {{Scientific Facts}}: {{Is Mechanistic Information More Effective}} for {{Environmentalists}}?}, - author = {Taube, Oliver and Ranney, Michael Andrew and Henn, Laura and Kaiser, Florian G.}, - year = {2021}, - month = jan, - journal = {Journal of Environmental Psychology}, - pages = {101549}, - publisher = {{Academic Press}}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2021.101549}, - urldate = {2021-01-13} -} - -@article{Taylor2021, - title = {Toward a Common Laser Powder Bed Fusion Qualification Test Artifact}, - author = {Taylor, H. C. and Garibay, E. A. and Wicker, R. B.}, - year = {2021}, - month = dec, - journal = {Additive Manufacturing}, - volume = {39}, - pages = {101803}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2020.101803}, - urldate = {2021-01-01}, - abstract = {Test artifacts have been used to evaluate additive manufacturing (AM) systems since the early 1990s with over 65 artifacts published to date. Due to the system agnostic approach to artifact design, principally focused on geometric accuracy, there has yet to be a widely adopted artifact for laser powder bed fusion (LPBF). To speed qualification of LPBF, a rapid method that quantifies impacts of process variables on part structure, properties, and performance is required. Using a list of design requirements developed from literature, build experience, and needs from several major roadmapping efforts, a test artifact was designed to evaluate geometry-specific microstructure, dimensional accuracy, residual stress, chemistry, surface integrity, powder removal, and distortion. The LPBF artifact includes: four sides for geometric feature accuracy and surface integrity analysis, indication marks for accurate sectioning for metallography, and additional features specifically designed to evaluate residual stress, powder removal, mechanical properties and distortion. The artifact is compact and designed to fit within a standard 50 mm metallographic mount with indication marks used to improve measurement repeatability and accuracy. Microstructure and anomaly population are quantifiable on features including overhangs, islands, thin features, channels, lattice structures and bulk areas representing different thermal histories. It is believed that this single test artifact can be used for many purposes, including optimization of LPBF input variables, qualification and more. Ongoing work is continuing to improve the artifact design, testing its implementation across LPBF platforms, and using the artifact to concretely define process sensitivity currently limiting standardization and adoption of LPBF due to costs associated with defining process windows in terms of qualification and certification. As part of this effort, the artifact described here forms the basis of the Global Test Artifact Data Exchange Program \textendash{} a program designed and managed by the authors for the benefit of research to advance LPBF qualification efforts and help lead to more widespread adoption of LPBF (described in more detail at keck.utep.edu/GTADExP).}, - keywords = {Additive manufacturing,Benchmark,Laser powder bed fusion,Process qualification,Standards,Test artifact}, - file = {/Users/fabio/Zotero/storage/RKGSRTKE/full-text.pdf} -} - -@article{tchetchikRecyclingConsumptionReduction2021, - title = {Recycling and Consumption Reduction Following the {{COVID-19}} Lockdown: {{The}} Effect of Threat and Coping Appraisal, Past Behavior and Information}, - author = {Tchetchik, Anat and Kaplan, Sigal and Blass, Vered}, - year = {2021}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {167}, - pages = {105370}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105370}, - urldate = {2021-01-12} -} - -@misc{TDsMecaniquePoint, - title = {{{TDs M\'ecanique}} Du {{Point}}}, - file = {/Users/fabio/Zotero/storage/QDQDX7UB/MPM_TDs Soluciones.pdf} -} - -@book{TeachingQualityLearning, - title = {Teaching for {{Quality Learning}} at {{University}}}, - isbn = {978-0-335-24275-7}, - file = {/Users/fabio/Zotero/storage/N4XDABX7/_.pdf} -} - -@book{TEEB2010, - title = {The {{Economics}} of {{Ecosystems}} and {{Biodiversity Ecological}} and {{Economic Foundations}}.}, - author = {{TEEB}}, - year = {2010}, - journal = {The Economics of Ecosystems and Biodiversity: Ecological and Economic Foundations}, - doi = {10.4324/9781849775489}, - urldate = {2021-09-13}, - abstract = {Human well-being relies critically on ecosystem services provided by nature. Examples include water and air quality regulation, nutrient cycling and decomposition, plant pollination and flood control, all of which are dependent on biodiversity. They are predominantly public goods with limited or no markets and do not command any price in the conventional economic system, so their loss is often not detected and continues unaddressed and unabated. This in turn not only impacts human well-being, but also seriously undermines the sustainability of the economic system. It is against this background that TEEB: The Economics of Ecosystems and Biodiversity project was set up in 2007 and led by the United Nations Environment Programme to provide a comprehensive global assessment of economic aspects of these issues. This book, written by a team of international experts, represents the scientific state of the art, providing a comprehensive assessment of the fundamental ecological and economic principles of measuring and valuing ecosystem services and biodiversity, and showing how these can be mainstreamed into public policies. This volume and subsequent TEEB outputs will provide the authoritative knowledge and guidance to drive forward the biodiversity conservation agenda for the next decade.}, - isbn = {978-1-84977-548-9}, - file = {/Users/fabio/Zotero/storage/38MXCYB4/full-text.pdf} -} - -@article{Teixeira2019, - ids = {teixeira2019}, - title = {How to Make Strategic Planning for Corporate Sustainability?}, - author = {Teixeira, Grazielle Fatima Gomes and Canciglieri Junior, Osiris}, - year = {2019}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {230}, - pages = {1421--1431}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.063}, - keywords = {Corporate sustainability,Maturity model,Product Development Process,Strategic planning,Sustainability} -} - -@article{teixeiraIndustryEuropeanUnion2022, - title = {Industry 4.0 in the {{European}} Union: {{Policies}} and National Strategies}, - author = {Teixeira, Jos{\'e}lia Elvira and {Tavares-Lehmann}, Ana Teresa C.P.}, - year = {2022}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {180}, - pages = {121664}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2022.121664}, - urldate = {2022-05-23} -} - -@article{tekicManagingInnovationEra2023, - title = {Managing Innovation in the Era of {{AI}}}, - author = {Tekic, Zeljko and F{\"u}ller, Johann}, - year = {2023}, - month = may, - journal = {Technology in Society}, - volume = {73}, - pages = {102254}, - issn = {0160-791X}, - doi = {10.1016/j.techsoc.2023.102254}, - urldate = {2023-05-10}, - abstract = {This paper conceptualizes how artificial intelligence (AI) may impact the way companies innovate and manage their innovation process. A research framework we use in investigation builds upon three pillars \textendash{} data, new tech, and talent. Based on it, we map and discuss changes for organizations applying AI in innovation management. We conceptualize innovation management in the era of AI as a data-driven process in which AI significantly affects all dimensions of the innovation process and its management. Further, our framework suggests that the need for data, technology, and talents will lead to more open and collaborative innovation approaches, novel strategies for innovation protection, and the emergence of new roles in innovation teams. Using AI for innovation management also creates challenges like ethical data usage, navigation through diversity emerging from humans collaborating with artificial intelligence, and escaping from the incremental innovation trap. We summarize our main conclusions as research propositions and outline their practical implications.}, - langid = {english}, - keywords = {AI,AI-based innovation,Data,Innovation management}, - file = {/Users/fabio/Zotero/storage/UWKWWVCV/Tekic y Füller - 2023 - Managing innovation in the era of AI.pdf;/Users/fabio/Zotero/storage/FGQ6B5NU/S0160791X23000593.html} -} - -@article{tekicTechnologicalSynergiesAntecedents2023, - title = {Technological Synergies as Antecedents of Sustainable Development: Deep-Tech versus Shallow-Tech Perspective}, - shorttitle = {Technological Synergies as Antecedents of Sustainable Development}, - author = {Tekic, Zeljko and Abuelez, Asia and Tekic, Anja}, - year = {2023}, - month = jun, - journal = {Technology Analysis \& Strategic Management}, - volume = {0}, - number = {0}, - pages = {1--15}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2023.2220828}, - urldate = {2023-07-03}, - abstract = {Prior research suggests that synergies between deep and shallow technologies could create unprecedented capacity to achieve sustainable development. However, there is little understanding if these synergies are already achieved and how different technologies work together on a country level to enable its sustainable development. We respond to this question starting from the contingency theory and adopting a configurational perspective to inductively explore the interaction effects of two key deep technologies (artificial intelligence and Internet of things) and two key shallow technologies (broadband and cloud computing) on a country's sustainability performance. We employ the fuzzy-set Qualitative Comparative Analysis (fsQCA) on a data set of 79 countries, allowing us to embrace the synergies brought by technological convergences. Our results determine how deep and shallow technologies complement and substitute each other and thereby create multiple technological pathways towards high and low sustainable development at the national level. In this way, this study offers significant implications for research, policy, and practice concerned with the issues lying at the intersection of technology and sustainability.}, - keywords = {Deep tech,QCA,SDGs,shallow tech,sustainable development} -} - -@article{Tekinalp2014, - title = {Highly Oriented Carbon Fiber-Polymer Composites via Additive Manufacturing}, - author = {Tekinalp, Halil L. and Kunc, Vlastimil and {Velez-Garcia}, Gregorio M. and Duty, Chad E. and Love, Lonnie J. and Naskar, Amit K. and Blue, Craig A. and Ozcan, Soydan}, - year = {2014}, - journal = {Composites Science and Technology}, - volume = {105}, - pages = {144--150}, - publisher = {{Elsevier Ltd}}, - issn = {02663538}, - doi = {10.1016/j.compscitech.2014.10.009}, - abstract = {Additive manufacturing is distinguished from traditional manufacturing techniques such as casting and machining by its ability to handle complex shapes with great design flexibility and without the typical waste. Although this technique has been mainly used for rapid prototyping, interest is growing in direct manufacture of actual parts. For wide spread application of 3D additive manufacturing, both techniques and feedstock materials require improvements to meet the mechanical requirements of load-bearing components. Here, we investigated short fiber (0.2-0.4. mm) reinforced acrylonitrile-butadiene-styrene composites as a feedstock for 3D-printing in terms of their processibility, microstructure and mechanical performance. The additive components are also compared with traditional compression molded composites. The tensile strength and modulus of 3D-printed samples increased \textasciitilde 115\% and \textasciitilde 700\%, respectively. 3D-printing yielded samples with very high fiber orientation in the printing direction (up to 91.5\%), whereas, compression molding process yielded samples with significantly lower fiber orientation. Microstructure-mechanical property relationships revealed that although a relatively high porosity is observed in 3D-printed composites as compared to those produced by the conventional compression molding technique, they both exhibited comparable tensile strength and modulus. This phenomenon is explained based on the changes in fiber orientation, dispersion and void formation.}, - isbn = {02663538}, - keywords = {A. Carbon fibers,A. Polymer-matrix composites,A. Short-fiber composites,B. Mechanical properties,E. Extrusion}, - file = {/Users/fabio/Zotero/storage/ZPRLJJCQ/Highly oriented carbon fiber-polymer composites via additive manufacturing.pdf} -} - -@article{temizOpenDataLost2022, - title = {Open Data: {{Lost}} Opportunity or Unrealized Potential?}, - author = {Temiz, Serdar and Holgersson, Marcus and Bj{\"o}rkdahl, Joakim and Wallin, Martin W.}, - year = {2022}, - month = apr, - journal = {Technovation}, - pages = {102535}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2022.102535}, - urldate = {2022-05-23} -} - -@article{tenneyOpenScienceReform2021, - title = {Open Science and Reform Practices in Organizational Behavior Research over Time (2011 to 2019)}, - author = {Tenney, Elizabeth R. and Costa, Elaine and Allard, Aur{\'e}lien and Vazire, Simine}, - year = {2021}, - month = jan, - journal = {Organizational Behavior and Human Decision Processes}, - volume = {162}, - pages = {218--223}, - publisher = {{Academic Press Inc.}}, - issn = {07495978}, - doi = {10.1016/j.obhdp.2020.10.015}, - urldate = {2021-02-14}, - abstract = {The ``credibility revolution'' has fueled a number of initiatives to help bring scientific practices more in line with scientific ideals. These initiatives include increasing the sample size of studies, making data and materials publicly available, pre-registering data collection and analysis plans, publishing replication attempts, and publishing null results. To what extent have these practices become the norm in quantitative Organizational Behavior research? In the current study, using computer algorithms and human coders, we coded the reported use of several open science and reform practices in articles published in four prominent journals (Academy of Management Journal; Journal of Applied Psychology; Organizational Behavior and Human Decision Processes; and Organization Science) from 2011 through 2019. We found that although the vast majority of articles did not use any open science practices, some practices we coded were on the rise, especially in the last two to three years. While there is much room for improvement, these results suggest the field could be on the brink of important and sustained change.}, - keywords = {Credibility revolution,Metascience,Open science,Reform practices} -} - -@book{Ter2014, - title = {{{RepRap}} for {{Science}} \textemdash{} {{How}} to {{Use}} , {{Design}} , and {{Troubleshoot}} the {{Self-Replicating}} 3-{{D Printer}}}, - author = {Ter, Chap}, - year = {2014}, - doi = {10.1016/B978-0-12-410462-4.00005-6}, - isbn = {978-0-12-410462-4}, - file = {/Users/fabio/Zotero/storage/PLCFIQKZ/Ter - 2014 - RepRap for Science — How to Use , Design , and Troubleshoot the Self-Replicating 3-D Printer.pdf} -} - -@article{Teran-Yepez2020, - title = {Sustainable Entrepreneurship: {{Review}} of Its Evolution and New Trends}, - author = {{Ter{\'a}n-Y{\'e}pez}, Eduardo and {Mar{\'i}n-Carrillo}, Gema Mar{\'i}a and {Casado-Belmonte}, Mar{\'i}a del Pilar and {Capobianco-Uriarte}, Mar{\'i}a de las Mercedes}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {252}, - pages = {119742}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.119742} -} - -@article{testaFiveShadesPlastic2021, - title = {Five Shades of Plastic in Food: {{Which}} Potentially Circular Packaging Solutions Are {{Italian}} Consumers More Sensitive To}, - author = {Testa, Francesco and Di Iorio, Vinicio and Cerri, Jacopo and Pretner, Gaia}, - year = {2021}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {173}, - pages = {105726}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105726}, - urldate = {2021-06-21} -} - -@article{testaRoleConsumerTradeoffs2022, - title = {The Role of Consumer Trade-Offs in Limiting the Transition towards Circular Economy: {{The}} Case of Brand and Plastic Concern}, - author = {Testa, Francesco and Gusmerotti, Natalia and Corsini, Filippo and Bartoletti, Edoardo}, - year = {2022}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {181}, - pages = {106262}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106262}, - urldate = {2022-03-14} -} - -@article{tezelDeterminationOptimumProduction2021, - title = {Determination of Optimum Production Parameters for {{3D}} Printers Based on Nozzle Diameter}, - author = {Tezel, Tugce and Kovan, Volkan}, - year = {2021}, - month = sep, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-08-2020-0185}, - urldate = {2021-09-21}, - keywords = {Comparative tests,Fused deposition modeling,Mechanical properties,Physical properties of materials,Surface roughness} -} - -@article{thaiyalnayahiMunicipalSolidWaste2022, - title = {Municipal Solid Waste Sanitary and Open Landfills: {{Contrasting}} Sources of Microplastics and Its Fate in Their Respective Treatment Systems}, - shorttitle = {Municipal Solid Waste Sanitary and Open Landfills}, - author = {Thaiyal Nayahi, N and Ou, Bunlong and Liu, Yuanyuan and Janjaroen, Dao}, - year = {2022}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {380}, - pages = {135095}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.135095}, - urldate = {2022-12-12}, - abstract = {Recently, research studies in identifying microplastics (MPs) from various environment has become a notable work, in the view of MPs as emerging pollutants as well as due to many undiscovered high-level impacts to both the environment and living beings. Out of many other sources, municipal solid waste land disposal methods, both controlled landfills and open dumping are observed to be one of the major sources of MPs origination as the predominant quantity of plastic wastes generated is being discarded in those methods. In this study, quantification, and characterization of MPs from the leachate generated from two different solid waste disposal methods and in their respective individual treatment systems were identified. From the studies, 20 different polymer types were spotted with the concentrations in the fresh leachate as 8.80~MPs/L and 9.93~MPs/L in the controlled landfill and open dumping, respectively. The fibers, films, and fragments are found to be the predominant polymer shapes in both the discarding process. Polypropylene and Polyethylene are the main prevailing polymer type in the controlled landfill, whereas polyethylene and polystyrene are in open dumping leachate samples. In addition, the analysis of the treatment system reveals that the ongoing units can remove the MPs from the leachate to some extent. For example, it removed {$\sim$}57.1\% of MPs from landfill leachate using biological treatment combined with disinfection. Whereas {$\sim$}75.2\% from the aerated lagoon and membrane treatment for leachate from the open dumping. More fibers with varying polymer types were identified from the effluent of membrane treatment, which is due to the membrane used. Finally, 37~MPs/g from dewatered sludge and {$\sim$}500~MPs/L of return sludge indicate the possibility of MPs that can reenter the biological system allowing an increase in the MPs abundance in the biological unit.}, - langid = {english}, - keywords = {Leachate,Microplastics,Open dumping,Sanitary landfill,Treatment system}, - file = {/Users/fabio/Zotero/storage/BVFJ5JD2/Thaiyal Nayahi et al_2022_Municipal solid waste sanitary and open landfills.pdf;/Users/fabio/Zotero/storage/B7K3Y7RH/S0959652622046698.html} -} - -@article{Thakker2021, - title = {Toward Sustainable Circular Economies: {{A}} Computational Framework for Assessment and Design}, - author = {Thakker, Vyom and Bakshi, Bhavik R}, - year = {2021}, - journal = {Journal of Cleaner Production}, - volume = {295}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126353}, - urldate = {2021-09-20}, - abstract = {Numerous directives and strategies in recent times aim to establish a Circular Economy (CE) for retaining the value of consumer discarded products within the technosphere, thereby implicitly reducing the burden on the ecosphere. Many opportunities to recycle, down-cycle or up-cycle products have also been identified for enabling greater circularity. However, to obtain a Sustainable Circular Economy (SCE) there is a need to holistically assess and design entire value chains of the product while considering various alternatives that may be available at each stage of its circular network. Systematic methods are also needed to determine the environmental, economic, and social implications of various value chain pathways and quantify their trade-offs with circularity from the perspective of multiple stakeholders. We propose a systematic and rigorous computational framework to analyze existing circular systems and develop new designs. This framework combines the computational approach of life cycle assessment with optimization-based approaches for process synthesis and network representation. Life-cycle networks are modified to contain multiple alternatives along the value chain and permit circular flows between modules. Four basic types of nodes are identified such that any SCE network may be represented as their combination. The additional degrees of freedom generated in such a superstructure network are determined by using principles of allocation and displacement, material-energy balances and physico-chemical governing equations of modules, thereby permitting integration of fundamental models with data-based LCA methods. Typical cases that may arise in potential circular value chains are formulated and solved to highlight the wide applicability of the framework. Both analysis and synthesis methods are proposed to evaluate candidate pathways within the superstructure network. Application of this framework to illustrative examples highlights its use for systematic design of circular value chains to meet SCE goals by quantifying the trade-offs between objectives. Such a framework is needed to develop general software to study the scope of innovation at different stages of the value chain, and contribute toward optimal closing of the cycles of different materials.}, - keywords = {Circular economy,Life-cycle analysis,Multi-objective optimization,Process synthesis,Sustainable design}, - file = {/Users/fabio/Zotero/storage/B35HSJND/full-text.pdf} -} - -@article{thakurFrameworkPESTELDimensions2020, - title = {Framework for {{PESTEL}} Dimensions of Sustainable Healthcare Waste Management: {{Learnings}} from {{COVID-19}} Outbreak}, - author = {Thakur, Dr. Vikas}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125562}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125562}, - urldate = {2020-12-21}, - file = {/Users/fabio/Zotero/storage/Z6W6K65B/full-text.pdf} -} - -@techreport{Themelis2011, - title = {Energy and Economic Value of Non- Recycled Plastics (Nrp) and Municipal Solid Wastes (Msw) That Are Currently Landfilled in the Fifty States}, - author = {Themelis, N J and Castaldi, M J and Bhatti, J and Arsova, L}, - year = {2011}, - number = {August}, - pages = {1--33}, - address = {{New York, NY:}}, - institution = {{Columbia University.}}, - file = {/Users/fabio/Zotero/storage/X5L7DHA3/Energy and economic value of non- recycled plastics (nrp) and municipal solid wastes (msw) that are currently landfilled in the fifty st.pdf} -} - -@article{thijssenTeacherRelationshipSkills2022, - title = {Teacher Relationship Skills and Student Learning}, - author = {Thijssen, Maximiliaan W. P. and Rege, Mari and Solheim, Oddny J.}, - year = {2022}, - month = aug, - journal = {Economics of Education Review}, - volume = {89}, - pages = {102251}, - issn = {0272-7757}, - doi = {10.1016/j.econedurev.2022.102251}, - urldate = {2023-06-13}, - abstract = {Despite extensive evidence on variation in teacher value-added, we have a limited understanding of why some teachers are more effective in promoting human capital than others. Using rich, high-quality data from Norway, we introduce and validate a new approach to measuring teachers' overall capacity to form positive relationships in the classroom, relying on student survey items previously developed and validated (at the student level) in the education literature. We denote this measure as teacher relationship skills. We find that teacher relationship skills are highly stable over time. Furthermore, there is not only substantial variation in teacher quality, as measured by students' learning outcomes conditional on past achievement, but also in teacher relationship skills, even within the same school. Finally, by relying on as-good-as random assignment of students to classes, we show that teacher relationship skills affect student learning.}, - langid = {english}, - keywords = {Academic achievement,And social-emotional skills,Educational economics,Human capital,Teacher quality,Teacher relationship skills}, - file = {/Users/fabio/Zotero/storage/7ZR8XJ76/Thijssen et al. - 2022 - Teacher relationship skills and student learning.pdf;/Users/fabio/Zotero/storage/9HSDW5BG/S0272775722000280.html} -} - -@article{ThirdIndustrialRevolution2012, - title = {A Third Industrial Revolution. {{The Economist}} 2.Pdf}, - year = {2012}, - journal = {The Economist}, - file = {/Users/fabio/Zotero/storage/J3C5BYN9/Unknown - 2012 - A third industrial revolution. The Economist 1.pdf.pdf;/Users/fabio/Zotero/storage/T5Y58UYN/Unknown - 2012 - A third industrial revolution. The Economist 2.pdf.pdf;/Users/fabio/Zotero/storage/WRZZ3T7V/Unknown - 2012 - A third industrial revolution. The Economist 3.pdf.pdf} -} - -@article{Thomas2013, - title = {Understanding the Normalisation of Recycling Behaviour and Its Implications for Other Pro-Environmental Behaviours: {{A}} Review of Social Norms and Recycling}, - author = {Thomas, Christine and Sharp, Veronica}, - year = {2013}, - journal = {Resources, Conservation and Recycling}, - volume = {79}, - pages = {11--20}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2013.04.010}, - abstract = {This paper examines our understanding of recycling behaviour in the context of its increasing normalisation in the UK. It reflects on the recent history of dry recycling (i.e. recycling of 'dry' materials such as paper, glass, plastics and cans) and asks the question as to what influence policy drivers and the increased provision of facilities for recycling have had on people's behaviour. In reviewing the evidence for recycling being considered a norm, this paper explores what influence norms, habit and identities have on recycling behaviour. It then considers what lessons the evidence offers for using the normalisation of recycling behaviour in influencing more people to recycle and to adopt other sustainable behaviours. The somewhat contentious issue of whether engaging in recycling behaviours has a positive or negative effect on people engaging with other pro-environmental behaviours is discussed. The evidence shows that both positive and negative spillover occurs and understanding where the balance lies, as well as what effect recycling being a norm plays in this, is important in determining appropriate interventions to influence pro-environmental behaviours. The paper concludes with some observations on implications of the evidence on intervention approaches to influence pro-environmental behaviours. \textcopyright{} 2013 Elsevier B.V. All rights reserved.}, - isbn = {0921-3449}, - pmid = {14600514}, - keywords = {Identity,Pro-environmental behaviour,Recycling,Social norms,Spillover}, - file = {/Users/fabio/Zotero/storage/7JC3EWRL/Understanding the normalisation of recycling behaviour and its implications for other pro-environmental behaviours A review of social no.pdf} -} - -@article{Thomas2014b, - title = {{{3D}} Additive Manufacture of Oral and Maxillofacial Surgical Models for Preoperative Planning}, - author = {Thomas, D. J. and Azmi, M. A.B.Mohd B. Mohd and Tehrani, Z.}, - year = {2014}, - month = jan, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {71}, - number = {9-12}, - pages = {1643--1651}, - issn = {14333015}, - doi = {10.1007/s00170-013-5587-4}, - urldate = {2014-02-11}, - abstract = {This paper investigates the errors generated during the fabrication stage for producing complex anatomical replicas derived from computed tomography coupled with the 3D additive manufacturing methods. Based on this research work, it is shown that patient-specific model based on computed tomography data can be converted into computer numerically controlled G-code. It is shown that 3D extrusion-based additive manufacturing technology is accurate to {$\pm$}3 \% equating to {$\pm$}200 {$\mu$}m surface deviations due to plastic shrinkage and distortion formed during the process. Polylactic acid plastic extrusion through a 200-{$\mu$}m bore nozzle has resulted in a model being produced with an R a roughness of 35.5 {$\mu$}m. An evaluation on the errors generated during the fabrication process has been used to accurately produce an adult female mandible. Internal nerve channels and complex external bone geometry has been produced within the model. It is shown that using this process results in bone complexity and accuracy required for producing low-cost surgical grades models which is in comparison with traditional selective laser sintering manufacturing techniques. The surface accuracies suggest that the reproduction of anatomically complex representative structures by 3D plastic extrusion additive manufacturing which can be used for pre-surgical planning. \textcopyright{} 2014 Springer-Verlag London.}, - isbn = {0268-3768}, - keywords = {3d additive manufacture,3D additive manufacture,3d printing,3D printing,medical models,Medical models,oral and maxillofacial,Oral and maxillofacial surgery,surgery}, - file = {/Users/fabio/Zotero/storage/UUUF26HN/3D additive manufacture of oral and maxillofacial surgical models for preoperative planning.pdf;/Users/fabio/Zotero/storage/X527ZCJM/3D additive manufacture of oral and maxillofacial surgical models for preoperative planning(2).pdf} -} - -@article{Thomas2016a, - title = {Costs, Benefits, and Adoption of Additive Manufacturing: A Supply Chain Perspective}, - author = {Thomas, Douglas}, - year = {2016}, - month = jul, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {85}, - number = {5-8}, - pages = {1857--1876}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {0268-3768}, - doi = {10.1007/s00170-015-7973-6}, - abstract = {There are three primary aspects to the economics of additive\textbackslash nmanufacturing: measuring the value of goods produced, measuring the\textbackslash ncosts and benefits of using the technology, and estimating the adoption\textbackslash nand diffusion of the technology. This paper provides an updated estimate\textbackslash nof the value of goods produced. It then reviews the literature on\textbackslash nadditive manufacturing costs and identifies those instances in the\textbackslash nliterature where this technology is cost-effective. The paper then goes\textbackslash non to propose an approach for examining and understanding the societal\textbackslash ncosts and benefits of this technology both from a monetary viewpoint and\textbackslash na resource consumption viewpoint. The final section discusses the trends\textbackslash nin the adoption of additive manufacturing. Globally, there is an\textbackslash nestimated \$667 million in value added produced using additive\textbackslash nmanufacturing, which equates to 0.01 \% of total global manufacturing\textbackslash nvalue added. US value added is estimated as \$241 million. Current\textbackslash nresearch on additive manufacturing costs reveals that it is\textbackslash ncost-effective for manufacturing small batches with continued\textbackslash ncentralized production; however, with increased automation distributed\textbackslash nproduction may become cost-effective. Due to the complexities of\textbackslash nmeasuring additive manufacturing costs and data limitations, current\textbackslash nstudies are limited in their scope. Many of the current studies examine\textbackslash nthe production of single parts and those that examine assemblies tend\textbackslash nnot to examine supply chain effects such as inventory and transportation\textbackslash ncosts along with decreased risk to supply disruption. The additive\textbackslash nmanufacturing system and the material costs constitute a significant\textbackslash nportion of an additive manufactured product; however, these costs are\textbackslash ndeclining over time. The current trends in costs and benefits have\textbackslash nresulted in this technology representing 0.02 \% of the relevant\textbackslash nmanufacturing industries in the USA; however, as the costs of additive\textbackslash nmanufacturing systems decrease, this technology may become widely\textbackslash nadopted and change the supplier, manufacturer, and consumer\textbackslash ninteractions. An examination in the adoption of additive manufacturing\textbackslash nreveals that for this technology to exceed \$4.4 billion in 2020, \$16.0\textbackslash nbillion in 2025, and \$196.8 billion in 2035, it would need to deviate\textbackslash nfrom its current trends of adoption.}, - isbn = {0017001579}, - keywords = {Additive manufacturing,Manufacturing,Supply chain}, - file = {/Users/fabio/Zotero/storage/NGQ66Y4R/Costs, benefits, and adoption of additive manufacturing a supply chain perspective.pdf} -} - -@article{thomasBusinessModelsOpen2020, - title = {Business Models for Open Source Hardware {{To}} Cite This Version : {{HAL Id}} : Tel-02504769 Hardware}, - author = {Thomas, Laetitia}, - year = {2020}, - file = {/Users/fabio/Zotero/storage/6D8TDHAB/Business models for open source hardware..pdf} -} - -@article{thomassenRetrospectiveProspectiveMaterial2022, - ids = {thomassen2022a}, - title = {Retrospective and Prospective Material Flow Analysis of the Post-Consumer Plastic Packaging Waste Management System in {{Flanders}}}, - author = {Thomassen, Gwenny and Van Passel, Steven and Alaerts, Luc and Dewulf, Jo}, - year = {2022}, - month = jun, - journal = {Waste Management}, - volume = {147}, - pages = {10--21}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.05.004}, - urldate = {2022-05-30} -} - -@article{thomasSustainableCircularEconomic2022, - title = {A Sustainable Circular Economic Supply Chain System with Waste Minimization Using {{3D}} Printing and Emissions Reduction in Plastic Reforming Industry}, - author = {Thomas, Abin and Mishra, Umakanta}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {345}, - pages = {131128}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131128}, - urldate = {2022-03-14} -} - -@article{Thompson2009a, - title = {Our Plastic Age}, - author = {Thompson, Richard C and Swan, Shanna H and Moore, Charles J and {vom Saal}, Frederick S}, - year = {2009}, - month = jul, - journal = {Philosophical Transactions of the Royal Society B: Biological Sciences}, - volume = {364}, - number = {1526}, - pages = {1973--1976}, - issn = {0962-8436}, - doi = {10.1098/rstb.2009.0054}, - abstract = {Within the last few decades, plastics have revolutionized our daily lives. Globally we use in excess of 260 million tonnes of plastic per annum, accounting for approximately 8 per cent of world oil production. In this Theme Issue of Philosophical Transactions of the Royal Society, we describe current and future trends in usage, together with the many benefits that plastics bring to society. At the same time, we examine the environmental consequences resulting from the accumulation of waste plastic, the effects of plastic debris on wildlife and concerns for human health that arise from the production, usage and disposal of plastics. Finally, we consider some possible solutions to these problems together with the research and policy priorities necessary for their implementation.}, - isbn = {0962-8436}, - pmid = {19528049}, - keywords = {be extruded,cast,debris,endocrine disruption,in manufacture are capable,moulded,of flow,of materials,phthalates,plastic,polymer,spun,such that they can,that at some stage,the term plastics applies,to a wide range,waste management}, - file = {/Users/fabio/Zotero/storage/PASIX7A7/Our plastic age.pdf} -} - -@article{Thompson2009b, - title = {Plastics, the Environment and Human Health: Current Consensus and Future Trends}, - author = {Thompson, Richard C. and Moore, Charles James and {vom Saal}, Frederick S. and Swan, Shanna H.}, - year = {2009}, - month = jul, - journal = {Philosophical Transactions of the Royal Society B: Biological Sciences}, - volume = {364}, - number = {1526}, - eprint = {19528062}, - eprinttype = {pubmed}, - pages = {2153--2166}, - issn = {0962-8436}, - doi = {10.1098/rstb.2009.0053}, - abstract = {Plastics have transformed everyday life; usage is increasing and annual production is likely to exceed 300 million tonnes by 2010. In this concluding paper to the Theme Issue on Plastics, the Environment and Human Health, we synthesize current understanding of the benefits and concerns surrounding the use of plastics and look to future priorities, challenges and opportunities. It is evident that plastics bring many societal benefits and offer future technological and medical advances. However, concerns about usage and disposal are diverse and include accumulation of waste in landfills and in natural habitats, physical problems for wildlife resulting from ingestion or entanglement in plastic, the leaching of chemicals from plastic products and the potential for plastics to transfer chemicals to wildlife and humans. However, perhaps the most important overriding concern, which is implicit throughout this volume, is that our current usage is not sustainable. Around 4 per cent of world oil production is used as a feedstock to make plastics and a similar amount is used as energy in the process. Yet over a third of current production is used to make items of packaging, which are then rapidly discarded. Given our declining reserves of fossil fuels, and finite capacity for disposal of waste to landfill, this linear use of hydrocarbons, via packaging and other short-lived applications of plastic, is simply not sustainable. There are solutions, including material reduction, design for end-of-life recyclability, increased recycling capacity, development of bio-based feedstocks, strategies to reduce littering, the application of green chemistry life-cycle analyses and revised risk assessment approaches. Such measures will be most effective through the combined actions of the public, industry, scientists and policymakers. There is some urgency, as the quantity of plastics produced in the first 10 years of the current century is likely to approach the quantity produced in the entire century that preceded.}, - isbn = {0962-8436}, - pmid = {19528062}, - keywords = {*Plastics,*Public Policy,Body Burden,Conservation of Natural Resources/*trends,debris,endocrine disruption,Environmental Pollution/*adverse effects/*preventi,Humans,numerical data,phthalates,plastic,polymer,Public Health/*trends,Risk Assessment/methods,waste management,Waste Management/*methods}, - file = {/Users/fabio/Zotero/storage/PYPL8PTA/Plastics, the environment and human health current consensus and future trends.pdf} -} - -@article{Thompson2016, - ids = {thompson2016}, - title = {Design for {{Additive Manufacturing}}: {{Trends}}, Opportunities, Considerations, and Constraints}, - author = {Thompson, Mary Kathryn and Moroni, Giovanni and Vaneker, Tom and Fadel, Georges and Campbell, R. Ian and Gibson, Ian and Bernard, Alain and Schulz, Joachim and Graf, Patricia and Ahuja, Bhrigu and Martina, Filomeno}, - year = {2016}, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {65}, - number = {2}, - pages = {737--760}, - publisher = {{CIRP}}, - issn = {17260604}, - doi = {10.1016/j.cirp.2016.05.004}, - abstract = {The past few decades have seen substantial growth in Additive Manufacturing (AM) technologies. However, this growth has mainly been process-driven. The evolution of engineering design to take advantage of the possibilities afforded by AM and to manage the constraints associated with the technology has lagged behind. This paper presents the major opportunities, constraints, and economic considerations for Design for Additive Manufacturing. It explores issues related to design and redesign for direct and indirect AM production. It also highlights key industrial applications, outlines future challenges, and identifies promising directions for research and the exploitation of AM's full potential in industry.}, - isbn = {9788578110796}, - pmid = {25246403}, - keywords = {Additive Manufacturing,Design,Manufacturing} -} - -@article{Thomson2012, - title = {Towards an {{Open Source Civilization}}}, - author = {Thomson, Cameron Colby and Jakubowski, Marcin}, - year = {2012}, - journal = {innovations - Making in America}, - volume = {7}, - number = {3}, - pages = {53--70}, - file = {/Users/fabio/Zotero/storage/KYEGIG85/Toward an Open Source Civilization.pdf} -} - -@article{Thomson2019, - title = {Combining Forecasts: {{Performance}} and Coherence}, - author = {Thomson, Mary E. and Pollock, Andrew C. and {\"O}nkal, Dilek and G{\"o}n{\"u}l, M. Sinan}, - year = {2019}, - month = apr, - journal = {International Journal of Forecasting}, - volume = {35}, - number = {2}, - pages = {474--484}, - issn = {01692070}, - doi = {10.1016/j.ijforecast.2018.10.006} -} - -@article{Thoring2012, - title = {Where Do We Learn to Design? {{A}} Case Study about Creative Spaces}, - author = {Thoring, Katja and Luippold, Carmen and Mueller, Roland M}, - year = {2012}, - journal = {The 2nd International Conference on Design Creativity (ICDC2012)}, - number = {September}, - pages = {1--8}, - abstract = {Department of Design , Anhalt University of Applied Sciences , Dessau , Germany Department of Information Systems , Berlin School of Economics and Law , Berlin , Germany Abstract : Based on a research approach with cultural probes , we analysed the work environments of a German design school . We identified five different types of spaces on the university ' s campus and within the classrooms \textemdash{} the `` solitary space '', the `` team space '', the `` tinker space '', the `` presentation space '', as well as `` transition spaces ''. Each of these space types is able to provide certain functions that may support the creative working and learning process , such as stimulation , knowledge repository , culture , social interaction , and process}, - isbn = {9781904670407}, - keywords = {creative space,creativity support,cultural probes,learning environment}, - file = {/Users/fabio/Zotero/storage/E2MJURFE/Where do we learn to design A case study about creative spaces.pdf} -} - -@article{Thornhill2021, - title = {Towards Ecological Science for All by All}, - author = {Thornhill, Ian and Cornelissen, J. Hans C. and Mcpherson, Jana M. and Stewart, Sara Macbride- and Mohamad, Zeeda and White, Hannah J. and Wiersma, Yolanda F.}, - year = {2021}, - month = feb, - journal = {Journal of Applied Ecology}, - volume = {58}, - number = {2}, - pages = {206--213}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {0021-8901}, - doi = {10.1111/1365-2664.13841}, - urldate = {2021-02-20} -} - -@article{Thrimurthulu2004, - title = {Optimum Part Deposition Orientation in Fused Deposition Modeling}, - author = {Thrimurthulu, K and Pandey, Pulak M and Venkata Reddy, N}, - year = {2004}, - month = may, - journal = {International Journal of Machine Tools and Manufacture}, - volume = {44}, - number = {6}, - pages = {585--594}, - issn = {08906955}, - doi = {10.1016/j.ijmachtools.2003.12.004}, - urldate = {2013-03-15}, - keywords = {adaptive slicing,average part surface roughness,building time,fdm,fused deposition modeling,optimum,part deposition orientation,ra,surface roughness}, - file = {/Users/fabio/Zotero/storage/SIJNB2QT/Thrimurthulu, Pandey, Venkata Reddy - 2004 - Optimum part deposition orientation in fused deposition modeling.pdf} -} - -@article{Tian2016, - title = {Interface and Performance of {{3D}} Printed Continuous Carbon Fiber Reinforced {{PLA}} Composites}, - author = {Tian, Xiaoyong and Liu, Tengfei and Yang, Chuncheng and Wang, Qingrui and Li, Dichen}, - year = {2016}, - journal = {Composites Part A: Applied Science and Manufacturing}, - volume = {88}, - pages = {198--205}, - publisher = {{Elsevier Ltd}}, - issn = {1359835X}, - doi = {10.1016/j.compositesa.2016.05.032}, - abstract = {A novel 3D printing based fabrication process of Continuous Fiber Reinforced Thermoplastic Composites (CFRTPCs) was proposed. Continuous carbon fiber and PLA filament were utilized as reinforcing phase and matrix, respectively, and simultaneously fed into the fused deposition modeling (FDM) 3D printing process realizing the integrated preparation and forming of CFRTPCs. Interfaces and performance of printed composites were systematically studied by analyzing the influencing of process parameters on the temperature and pressure in the process. Forming mechanism of multiple interfaces was proposed and utilized to explain the correlations between process and performance. Fiber content of the printed specimens can be easily controlled by changing the process parameters. When the fiber content reached 27\%, flexural strength of 335 MPa and modulus of 30 GPa were obtained for the printed composite specimens. Composite components were fabricated to demonstrate the process feasibility. Potential applications could be found in the field of aviation and aerospace.}, - keywords = {3D printing,Continuous carbon fiber,Fiber reinforced thermoplastic composites,Interface}, - file = {/Users/fabio/Zotero/storage/VNH79F4A/Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites.pdf} -} - -@article{Tian2017, - title = {Recycling and Remanufacturing of {{3D}} Printed Continuous Carbon Fiber Reinforced {{PLA}} Composites}, - author = {Tian, Xiaoyong and Liu, Tengfei and Wang, Qingrui and Dilmurat, Abliz and Li, Dichen and Ziegmann, Gerhard}, - year = {2017}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {142}, - pages = {1609--1618}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2016.11.139}, - abstract = {A cleaner production pattern for high-performance continuous carbon fiber reinforced thermoplastic composites (CFRTPCs) has been proposed on the base of recycling and remanufacturing of 3D printed continuous carbon fiber reinforced (CFR) PLA composites. Continuous carbon fiber and PLA matrix was recycled in the form of PLA impregnated carbon fiber filament from 3D printed composite components and reused as the raw material for further 3D printing process. The original printing trajectory is reversely applied, allowing for a 100\% recycling of the continuous fiber without any effect on the mechanical properties. Tensile performance of recycled carbon fiber filaments was evaluated, which was higher than that of originally printed composites. Remanufactured CFRTPCs specimens also exhibited a 25\% higher bending strength than that of original ones, which experimentally demonstrated the first non-downgrade recycling process for CFRTPCs. A material recovery rate of 100\% for continuous carbon fiber and 73\% for PLA matrix were achieved for a better environmental impact. Energy consumption of 67.7 and 66 MJ/kg respectively for recycling and remanufacturing processes was detected and compared with conventional methods. The proposed cleaner production pattern offered a potential strategy for the low-cost industrial application of fully recyclable composites.}, - keywords = {3D printing,Continuous fiber reinforced thermoplastic composit,PLA composites,Recycling,Remanufacturing}, - file = {/Users/fabio/Zotero/storage/7SC9LP4P/Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites.pdf} -} - -@article{Tien2012, - title = {The next Industrial Revolution: {{Integrated}} Services and Goods}, - author = {Tien, James M.}, - year = {2012}, - journal = {Journal of Systems Science and Systems Engineering}, - volume = {21}, - number = {3}, - pages = {257--296}, - issn = {10043756}, - doi = {10.1007/s11518-012-5194-1}, - abstract = {The outputs or products of an economy can be divided into services products and goods products (due to manufacturing, construction, agriculture and mining). To date, the services and goods products have, for the most part, been separately mass produced. However, in contrast to the first and second industrial revolutions which respectively focused on the development and the mass production of goods, the next - or third - industrial revolution is focused on the integration of services and/or goods; it is beginning in this second decade of the 21st Century. The Third Industrial Revolution (TIR) is based on the confluence of three major technological enablers (i. e., big data analytics, adaptive services and digital manufacturing); they underpin the integration or mass customization of services and/or goods. As detailed in an earlier paper, we regard mass customization as the simultaneous and real-time management of supply and demand chains, based on a taxonomy that can be defined in terms of its underpinning component and management foci. The benefits of real-time mass customization cannot be over-stated as goods and services become indistinguishable and are co-produced - as "servgoods" - in real-time, resulting in an overwhelming economic advantage to the industrialized countries where the consuming customers are at the same time the co-producing producers. \textcopyright{} 2012 Systems Engineering Society of China and Springer-Verlag Berlin Heidelberg.}, - isbn = {1004-3756\textbackslash r1861-9576}, - keywords = {adaptive services,Big data,decision analytics,demand chain,digital manufacturing,goods,industrial revolution,mass customization,mass production,supply chain,value chain}, - file = {/Users/fabio/Zotero/storage/D4LSFINB/Tien - 2012 - The next industrial revolution Integrated services and goods.pdf} -} - -@article{Tierney2020, - title = {Creative Destruction in Science}, - author = {Tierney, Warren and Hardy, Jay H. and Ebersole, Charles R. and Leavitt, Keith and Viganola, Domenico and Clemente, Elena Giulia and Gordon, Michael and Dreber, Anna and Johannesson, Magnus and Pfeiffer, Thomas and Uhlmann, Eric Luis}, - year = {2020}, - month = nov, - journal = {Organizational Behavior and Human Decision Processes}, - volume = {161}, - pages = {291--309}, - publisher = {{Academic Press}}, - issn = {07495978}, - doi = {10.1016/j.obhdp.2020.07.002}, - urldate = {2020-10-05}, - file = {/Users/fabio/Zotero/storage/EH2A5IHF/full-text.pdf} -} - -@article{tillerRiskPerceptionRisk2022, - title = {Risk Perception and Risk Realities in Forming Legally Binding Agreements: {{The}} Governance of Plastics}, - author = {Tiller, Rachel and Booth, Andy M. and Cowan, Emily}, - year = {2022}, - month = aug, - journal = {Environmental Science \& Policy}, - volume = {134}, - pages = {67--74}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.04.002}, - urldate = {2022-05-23} -} - -@article{tilleyIndustrialEcologyEcological2003, - title = {Industrial {{Ecology}} and {{Ecological Engineering}}}, - author = {Tilley, David Rogers}, - year = {2003}, - journal = {Journal of Industrial Ecology}, - volume = {7}, - number = {2}, - pages = {13--32}, - issn = {1530-9290}, - doi = {10.1162/108819803322564325}, - urldate = {2022-09-26}, - abstract = {Ecological engineering (EE) and industrial ecology (IE) strive to balance humanity's activities with nature. The disciplines have emerged separately but share theoretical foundations and philosophies on how to address today's complex environmental issues. Although EE and IE share motive, goals, theories, and philosophies, there are many differences. These similarities and differences may make for a strong symbiotic relationship between the two fields. The goals of this article are (1) to compare and contrast the two fields to identify opportunities for collaboration and integration and (2) to suggest three cross-disciplinary focal areas that bridge EE and IE. The first symbiotic area, ecosystem engineering for byproduct recovery, is defined as the design, creation, and management of living ecosystems (e.g., forests, wetlands) that utilize the by-products of industrial systems. Examples of this exist, including constructed wetlands for lead recovery and phyto-mining of nickel tailings. The second symbiotic focus is entitled ``ecosystem analogues for industrial ecology'', which fits with a founding principle of IE to strive to have industry emulate the energy efficiencies and material cycles of natural ecosystems. This focal area quantifies the ecological analogy and exploits the tremendous library of design alternatives that nature has developed over thousands of years to deal with varied resource situations. The third focal area is termed ``eco-system information engineering.'' The means by which living ecosystems have created robust knowledge systems and information cycles should be understood in terms useful for managing current society's information explosion. As industrial society evolves toward the information society, holistic models are needed that account for the available energy and material resources required to operate effective information ecosystems, such as service industries.}, - langid = {english}, - keywords = {biological analogy,constructed wetlands,ecological analogies,emergy,recycling,sustainable technology}, - file = {/Users/fabio/Zotero/storage/7A9UTSS6/Tilley_2003_Industrial Ecology and Ecological Engineering.pdf;/Users/fabio/Zotero/storage/QQG7VLUC/108819803322564325.html} -} - -@article{tilmanCooperateChangingPlanet2022, - title = {Cooperate to Save a Changing Planet}, - author = {Tilman, Andrew R.}, - year = {2022}, - month = nov, - journal = {Nature Sustainability}, - pages = {1--2}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-022-01011-6}, - urldate = {2022-12-12}, - abstract = {A lack of regional and international collective action is the greatest barrier to achieving global environmental sustainability. Game theoretic experiments suggest that introducing shared goals could offer a path forward.}, - copyright = {2022 This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply}, - langid = {english}, - keywords = {Conservation biology,Psychology and behaviour,Sustainability}, - file = {/Users/fabio/Zotero/storage/BMT6WXBV/Tilman_2022_Cooperate to save a changing planet.pdf} -} - -@article{tilstedAccountingMattersRevisiting2021, - title = {Accounting Matters: {{Revisiting}} Claims of Decoupling and Genuine Green Growth in {{Nordic}} Countries}, - author = {Tilsted, Joachim Peter and Bj{\o}rn, Anders and {Majeau-Bettez}, Guillaume and Lund, Jens Friis}, - year = {2021}, - month = sep, - journal = {Ecological Economics}, - volume = {187}, - pages = {107101}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107101}, - urldate = {2021-06-08}, - file = {/Users/fabio/Zotero/storage/244FVAPL/full-text.pdf} -} - -@article{Timlett2008, - title = {Public Participation and Recycling Performance in {{England}}: {{A}} Comparison of Tools for Behaviour Change}, - author = {Timlett, R. E. and Williams, I. D.}, - year = {2008}, - journal = {Resources, Conservation and Recycling}, - volume = {52}, - number = {4}, - pages = {622--634}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2007.08.003}, - abstract = {Improving the quality and capture of materials collected for recycling is at the top of the waste agenda for many English local authorities. In recent years, the focus has shifted away from general awareness raising techniques in favour of methods that can bring about behaviour change. This paper reports on three projects each using a different behaviour change based approach, which all aimed to increase participation in the recycling collection scheme and to reduce inclusion of non-targeted materials ("contamination"). The three projects-one doorstepping-based, one incentives-based and one delivering personalised feedback to residents were carried out in Portsmouth between 2005 and 2006 during a period where there were no major changes to the collection infrastructure. The findings show that personalised incentives and feedback were highly effective at reducing contamination. Both methods resulted in a halving of the number of households setting out contaminants on collection day. The feedback approach was considerably more cost-effective than the other two approaches, costing {$\sim\pounds$}0.50 per household to implement the campaign and averaging {$\sim\pounds$}3.00 for every household which subsequently displayed behaviour change. There was little improvement in the quality of collected materials attributed to doorstepping alone. None of the projects resulted in significant changes in recycling scheme participation; however, this may be because participation was initially high. These findings suggest that behaviour change is most effectively brought about using simple, low-cost methods to engage with residents at the point of service delivery, i.e. by the collection crews whilst emptying bins. The challenge now is to integrate this into service delivery as standard. \textcopyright{} 2007 Elsevier B.V. All rights reserved.}, - isbn = {0921-3449}, - keywords = {Behaviour change,Contamination,Doorstepping,Feedback,Incentives,Participation,Recycling}, - file = {/Users/fabio/Zotero/storage/C84GG3PC/Public participation and recycling performance in England A comparison of tools for behaviour change.pdf} -} - -@article{Timlett2009, - title = {The Impact of Transient Populations on Recycling Behaviour in a Densely Populated Urban Environment}, - author = {Timlett, R. E. and Williams, I. D.}, - year = {2009}, - journal = {Resources, Conservation and Recycling}, - volume = {53}, - number = {9}, - pages = {498--506}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2009.03.010}, - abstract = {This research paper explores the role of transience in kerbside recycling performance in Portsmouth, a Southern English city and one of the most densely populated in Europe. Recycling in an urban environment is difficult; UK authorities failing to meet their recycling targets are predominantly cities where medium and high density housing causes problems for collections that rely on householder segregation of waste. Since urban areas are likely to become more densely populated, the waste management issues arising in Portsmouth may be illustrative of those likely to be faced by authorities with high rates of population flux and high population densities in future, especially university towns and cities. A recycling participation survey of 62,299 households was carried out in June-July 2005 and repeated in June-July 2007. Householder participation in the kerbside scheme was recorded over three consecutive collections (6 weeks). There was very little change in overall participation between the two surveys, with 78.4\% of households participating in recycling in 2005 and 78.2\% in 2007. Although this shows recycling to be the "normal" activity, conducted by most households in both surveys, 10\% of households were found to be "new recyclers" and 10\% seemed to stop recycling (i.e. they were found to be recycling in 2005 but not in 2007), with the more densely populated areas being "hot spots" of change. As a consequence, 3 months after the 2007 participation survey, approximately 1300 "stopped recycling" households were surveyed by a team of doorsteppers to discuss why they apparently stopped recycling during the survey period. A key issue was population transience, which was found to be greater in urban areas. It seems that once the recycling habit is established it is very difficult to break. Changes in "physical" circumstances were the drivers behind those properties that stopped recycling: a change of address, a change in occupants, a bin going missing. A four-group recycling behaviour typology (sustained recycler, non-recycler, stopped recycler, and new recycler) emerges, which will be useful for many urban waste authorities in monitoring and analysing their own recycling performance. It is clear from this study that policies to concentrate population and to increase recycling rates in urban areas could potentially conflict. Actions for increasing recycling rates appropriate for authorities with high rates of population flux and high population densities are suggested, including targeted and carefully timed communications campaigns, especially for university students, and guidelines for new build properties. \textcopyright{} 2009 Elsevier B.V. All rights reserved.}, - isbn = {0921-3449}, - keywords = {Behaviour change,Participation,Recycling,Transience,Urban}, - file = {/Users/fabio/Zotero/storage/8C9QJ79X/The impact of transient populations on recycling behaviour in a densely populated urban environment.pdf} -} - -@article{Timmermans2020, - title = {Social Labs as an Inclusive Methodology to Implement and Study Social Change: The Case of Responsible Research and Innovation}, - author = {Timmermans, Job and Blok, Vincent and Braun, Robert and Wesselink, Renate and Nielsen, Rasmus {\O}jvind}, - year = {2020}, - month = sep, - journal = {J. Responsible Innov.}, - volume = {7}, - number = {3}, - pages = {410--426}, - publisher = {{Routledge}}, - issn = {2329-9460}, - doi = {10.1080/23299460.2020.1787751}, - abstract = {The embedding and promotion of social change is faced with a paradoxical challenge. In order to mainstream an approach to social change such as responsible research and innovation (RRI) and make it into a practical reality rather than an abstract ideal, we need to have conceptual clarity and empirical evidence. But, in order to be able to gather empirical evidence, we have to presuppose that the approach already exists in practice. This paper proposes a social lab methodology that is suited to deal with this circularity. The methodology combines the defining features of social labs emerging from the literature such as agility and real-world focus with established theories and approaches such as action research and experiential learning. Thereby it enables the parallel investigation and propagation of RRI. The framework thus constructed provides a theoretical embedding of social labs and overcomes some of the known limitations of the constitutive approaches.}, - keywords = {emerging social phenomena,hermeneutics,research methodology,Responsible innovation,social lab} -} - -@article{tiongEconomiesDimensionalityDesign2019, - title = {The {{Economies}} and {{Dimensionality}} of {{Design Prototyping}}: {{Value}}, {{Time}}, {{Cost}}, and {{Fidelity}}}, - author = {Tiong, Edward and Seow, Olivia and Camburn, Bradley and Teo, Kenneth and Silva, Arlindo and Wood, Kristin L. and Jensen, Daniel D. and Yang, Maria C.}, - year = {2019}, - month = mar, - journal = {Journal of Mechanical Design, Transactions of the ASME}, - volume = {141}, - number = {3}, - publisher = {{American Society of Mechanical Engineers (ASME)}}, - issn = {10500472}, - doi = {10.1115/1.4042337}, - urldate = {2021-02-16}, - abstract = {Economic use of early-stage prototyping is of paramount importance to companies engaged in the development of innovative products, services, and systems because it directly impacts their bottom line. There is likewise a need to understand the dimensions, and lenses that make up an economic profile of prototypes. Yet, there is little reliable understanding of how resources expended and views of dimensionality across prototyping translate into value. To help practitioners, designers, and researchers leverage prototyping most economically, we seek to understand the tradeoff between design information gained through prototyping and the resources expended prototyping. We investigate this topic by conducting an inductive study on industry projects across disciplines and knowledge domains while collecting and analyzing empirical data on their prototype creation and test processes. Our research explores ways of quantifying prototyping value and reinforcing the asymptotic relationship between value and fidelity. Most intriguingly, the research reveals insightful heuristics that practitioners can exploit to generate high value from low and high fidelity prototypes alike.} -} - -@article{Tisler-Korljan2014, - title = {Properties and Printability of Compression Moulded Recycled Polyethylene}, - author = {{Ti{\v s}ler-Korljan}, Barbara and {Gregor-Svetec}, Diana}, - year = {2014}, - journal = {Materials and Design}, - volume = {55}, - pages = {583--590}, - issn = {18734197}, - doi = {10.1016/j.matdes.2013.10.037}, - abstract = {The goal of the research was the determination of the properties and printability of polymeric materials made from the recycled polymers, low-density polyethylene (LDPE) and high-density polyethylene (HDPE). From the primary (virgin) polymers and secondary (recycled) polymers that were obtained from the separately collected fractions of waste packaging, compression moulded plates were produced. The tensile properties of 1. mm and 2. mm thin plates were correlated with some structural characteristics: melting point, melting enthalpy and crystallinity degree. It was determined that the recycling process changes the melting behaviour, lowers the crystallinity and to some extent influences the tensile properties of plates. LDPE and HDPE compression moulded plates were printed with the UV inks on the large format digital UV inkjet printer Oc?? Arizona. To investigate the printability of plates made from the recycled materials some of their surface properties were determined. Higher optical density, area of ink coverage and dot gain of the printed HDPE plates compared to the LDPE plates are the consequence of higher roughness, higher surface energy with prevailing part of the polar component. By adding 4\% of coloured master batch to the recycled polymer at moulding, the uniformity of colour is improved leading to the higher print quality. The results have shown that the digital UV inkjet printing technique could be applied for printing recycled polyethylene plastic materials, used for disposable low cost packaging products. ?? 2013 Elsevier Ltd.}, - keywords = {Polyethylene,Print quality,Printability,Recycling,Tensile properties,UV inkjet prints}, - file = {/Users/fabio/Zotero/storage/SKLK3A5A/Tišler-Korljan, Gregor-Svetec - 2014 - Properties and printability of compression moulded recycled polyethylene.pdf} -} - -@article{Tiwari2020, - title = {Sustainability Accounting and Reporting in the Industry 4.0}, - author = {Tiwari, Kamlesh and Khan, Mohammad Shadab}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {258}, - pages = {120783}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120783}, - urldate = {2020-03-23}, - abstract = {Industry 4.0 is the fourth industrial revolution. It is formed on the building blocks of Industrial Internet of Things, real-time data collection and predictive analytics using big data analytics, artificial intelligence, and cloud manufacturing. The complexity and value of Industry 4.0 is established by the existing research studies. Some of the research studies have proposed the design elements and contribution of Industry 4.0 to achieving sustainability objectives. This research delves deeper into this area to evolve a new research challenge on contribution of Industry 4.0 to sustainability accounting and reporting. Through a methodology of two focus group discussions and interviews, this research derived an empirical formulation presenting a mapping between Industry 4.0 attributes and selected material topics and their disclosures in Global Reporting Initiative framework. The empirical formulation divided the Industry 4.0 framework in India into three levels of maturity each mapped with the appropriate triple bottomline topics under the Global Reporting Initiative. This empirical formulation requires further research to establish its validity as it appears to be not-to-optimistic representation by the members of the two focus groups. The Interview respondents suggested cautious approach as AI-based predictive analytics and automation may need a long maturity path. Soft aspects of reluctance to complexity and new technology adoption may need continuous evolution of technical and other training programmes with the maturity of Industry 4.0 for sustainability accounting and reporting in an organisation.}, - keywords = {Accounting,Artificial intelligence,Big data,Global Reporting Initiative,Industry 4.0,Internet of Things,Reporting,Sustainability} -} - -@article{tiwariCriticalReviewFuture2023, - ids = {tiwari2023a}, - title = {A Critical Review and Future Perspective of Plastic Waste Recycling}, - author = {Tiwari, Rahul and Azad, Numanuddin and Dutta, Deblina and Yadav, Bholu Ram and Kumar, Sunil}, - year = {2023}, - month = jul, - journal = {Science of The Total Environment}, - volume = {881}, - pages = {163433}, - issn = {0048-9697}, - doi = {10.1016/j.scitotenv.2023.163433}, - urldate = {2023-08-21}, - abstract = {Plastic waste is increasing rapidly due to urbanisation and globalization. In recent decades, plastic usage increased, and the upward trend is expected to continue. Only 9\% of the 7 billion tonnes of plastic produced were recycled in India until 2022. India generates 1.5 million tonnes of plastic waste (PW) every year and ranks among top ten plastic producer countries. Large amount of waste plastics could harm environment and human health. The current manuscript provides a comprehensive approach for mechanical and chemical recycling methods. The technical facets of mechanical recycling relating to collection, sorting, grading, and general management to create plastic products with additional value have been elaborated in this study. Another sustainable methods aligned with the chemical recycling using pyrolysis, gasification, hydrocracking, IH2 (Integrated Hydropyrolysis 2), and KDV (Katalytische Drucklose Verolung) techniques have also been highlighted with the critical process parameters for the sustainable conversion of plastic waste to valuable products. The review also adheres to less carbon-intensive plastic degrading strategies that take a biomimetic approach using the microorganism based biodegradation. The informative aspects covering the limitations and effectiveness of all PW technologies and its applications towards plastic waste management (PWM) are also emphasized. The existing practices in PW policy guidelines along with its economic and ecological aspects have also been discussed.}, - keywords = {Chemical recycling,Gasification,Mechanical recycling,Microorganism,Plastic degradation,Plastic waste (PW),Pyrolysis}, - file = {/Users/fabio/Zotero/storage/KA4J55F4/Tiwari et al_2023_A critical review and future perspective of plastic waste recycling.pdf;/Users/fabio/Zotero/storage/5VGKXL9S/S0048969723020521.html} -} - -@article{Tofail2018, - title = {Additive Manufacturing: Scientific and Technological Challenges, Market Uptake and Opportunities}, - author = {Tofail, Syed A.M. and Koumoulos, Elias P. and Bandyopadhyay, Amit and Bose, Susmita and O'Donoghue, Lisa and Charitidis, Costas}, - year = {2018}, - journal = {Materials Today}, - volume = {21}, - number = {1}, - pages = {22--37}, - issn = {18734103}, - doi = {10.1016/j.mattod.2017.07.001}, - abstract = {Additive manufacturing (AM) is fundamentally different from traditional formative or subtractive manufacturing in that it is the closest to the `bottom up' manufacturing where a structure can be built into its designed shape using a `layer-by-layer' approach rather than casting or forming by technologies such as forging or machining. AM is versatile, flexible, highly customizable and, as such, can suite most sectors of industrial production. Materials to make these parts/objects can be of a widely varying type. These include metallic, ceramic and polymeric materials along with combinations in the form of composites, hybrid, or functionally graded materials (FGMs). The challenge remains, however, to transfer this `making' shapes and structures into obtaining objects that are functional. A great deal of work is needed in AM in addressing the challenges related to its two key enabling technologies namely `materials' and `metrology' to achieve this functionality in a predictive and reproductive ways. The good news is that there is a significant interest in industry for taking up AM as one of the main production engineering route. Additive Manufacturing, in our opinion, is definitely at the cross-road from where this new, much-hyped but somewhat unproven manufacturing process must move towards a technology that can demonstrate the ability to produce real, innovative, complex and robust products.}, - isbn = {13697021 (ISSN)}, - file = {/Users/fabio/Zotero/storage/Z5NH24Y7/Additive manufacturing scientific and technological challenges, market uptake and opportunities.pdf} -} - -@book{Toffler1980, - title = {The Third Wave}, - author = {Toffler, Alvin}, - year = {1980}, - publisher = {{Bantam books New York}}, - address = {{New York}} -} - -@article{toivonenEmpoweringUpcomingCity2021, - title = {Empowering Upcoming City Developers with Futures Literacy}, - author = {Toivonen, Saija and Rashidfarokhi, Anahita and Kyr{\"o}, Riikka}, - year = {2021}, - month = may, - journal = {Futures}, - volume = {129}, - pages = {102734}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102734}, - urldate = {2021-04-21}, - abstract = {New types of human capacities will be needed to achieve sustainable futures within our planet's limited boundaries. The capability of futures thinking, i.e., futures literacy is among the required proficiencies. This research explores how engaging in futures studies methods develops the futures literacy of upcoming city developers. Four student test groups, with altogether 373 participants, took part in futures studies lectures and workshop activities in two countries. This study considers the ability to participate as the first step towards empowerment. Following participation, the three levels of futures literacy (Awareness - Discovery \textendash{} Choice), should be reached. Finally, futures literacy brings with it the possibility to participate, closing this loop of empowerment. The study finds that the employed futures activities delivered these levels and loop of empowerment within the test groups students. This paper provides a practical framework of concepts with which the futures methods can be used as a systematic, participatory approach to explore futures and drivers of change, with a link to action. The findings are equally useful for higher education teachers, attempting to engage students in action and practising city developers aiming for a higher level of empowerment in their communities.}, - keywords = {Empowerment,Engagement,Futures literacy,Participation,Societal challenges}, - file = {/Users/fabio/Zotero/storage/KVB8NII3/full-text.pdf} -} - -@article{Tokoro2007, - title = {How to Improve Mechanical Properties of Polylactic Acid with Bamboo Fibers}, - author = {Tokoro, Ryoko and Vu, Duc Minh and Okubo, Kazuya and Tanaka, Tatsuya and Fujii, Toru and Fujiura, Takayasu}, - year = {2007}, - month = oct, - journal = {Journal of Materials Science}, - volume = {43}, - number = {2}, - pages = {775--787}, - issn = {0022-2461}, - doi = {10.1007/s10853-007-1994-y}, - urldate = {2014-02-25}, - file = {/Users/fabio/Zotero/storage/6EZZFQKX/Tokoro et al. - 2007 - How to improve mechanical properties of polylactic acid with bamboo fibers.pdf} -} - -@article{toktarovaThermochemicalRecyclingPlastics2022, - title = {Thermochemical Recycling of Plastics \textendash{} {{Modeling}} the Implications for the Electricity System}, - author = {Toktarova, Alla and G{\"o}ransson, Lisa and Thunman, Henrik and Johnsson, Filip}, - year = {2022}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {374}, - pages = {133891}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133891}, - urldate = {2022-09-18}, - abstract = {To achieve a circular economy, we need to reinvent the ways in which plastic products are produced, used and recycled. This study investigates the cost-optimal design and operation of an electrified process for the production of plastics that employs thermochemical recycling of plastics and waste. In addition, the impact of this process on the north European electricity system is investigated. A techno-economic optimization model, with the objective of meeting the demand for electricity and plastic to the lowest cost, is developed. The model minimizes the investment and operating costs of electricity and plastic production units while meeting the demands for electricity and plastics without adding carbon-dioxide to the atmosphere. The model considers different flexibility options that can be applied in the plastics production process. A fully flexible plastics production process that has flexibility in relation to time, location and CO2 utilization shows the lowest cost for plastics production and the highest carbon circularity. At the same time, a fully flexible process has the lowest capacity utilization rate, i.e., there is an investment in overcapacity. The results show that a process with flexibility in time renders 100\% carbon recovery beneficial, whereas inflexible operation of the plastics production process requires the development and scaling-up of carbon capture and storage facilities. Furthermore, the results show that for the thermochemical production of plastics, the availability of large volumes of waste and favorable conditions for generating electricity at low cost determine the location of the plastics production units. The additional electricity demand to produce plastics is mainly covered by increased generation from wind and nuclear power plants, while wind and solar power dominate in the modeled electricity system mix.}, - langid = {english}, - keywords = {Circular economy,Electrification,Flexibility,Storage,Thermochemical recycling,Waste gasification}, - file = {/Users/fabio/Zotero/storage/VELHW77W/Toktarova et al_2022_Thermochemical recycling of plastics – Modeling the implications for the.pdf;/Users/fabio/Zotero/storage/PMM4Q4AM/S0959652622034643.html} -} - -@article{tolppanenChangesStudentsKnowledge2022, - title = {Changes in Students' Knowledge, Values, Worldview, and Willingness to Take Mitigative Climate Action after Attending a Course on Holistic Climate Change Education}, - author = {Tolppanen, Sakari and Kang, Jingoo and Riuttanen, Laura}, - year = {2022}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {373}, - pages = {133865}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133865}, - urldate = {2022-09-18}, - abstract = {Though the need for holistic climate change education has been realized around the world, there is a lack of studies that examine the multidimensional impact of climate change education in higher education. To amend for this gap in literature, this paper uses a pre- and post-questionnaire (N~=~245) to examine how students' knowledge, values, worldview and willingness to take mitigative climate actions change during a course on climate change. Though the course was designed to be multidisciplinary and holistic, the results show that the course had limited impact. First, the pre-post tests showed a significant increase in science knowledge, but knowledge on mitigative actions remained unchanged despite related course assignments. Second, though participants' worldview seemed to change or strengthen during the course, minimal changes were seen in students' willingness to take mitigative actions. However, an increase in biospheric values -a strong predictor of pro-environmental behavior - was seen in some segments of participants, potentially predicting a lower carbon footprint for those students in the future. Furthermore, the findings suggest that during the course, individuals found new, environmentally friendly ways to address their hedonic pleasures, also potentially having long-term positive effects. Some differences in gender and field of study were noted. Implications of the findings are discussed in relation to planning and implementing holistic climate change education.}, - langid = {english}, - keywords = {Holistic climate change education,Knowledge,Mitigation,Values,Worldview}, - file = {/Users/fabio/Zotero/storage/X5FQUWI5/Tolppanen et al_2022_Changes in students’ knowledge, values, worldview, and willingness to take.pdf;/Users/fabio/Zotero/storage/KWWDFJ9I/S0959652622034400.html} -} - -@book{tomdieckAugmentedRealityVirtual2019, - title = {Augmented {{Reality}} and {{Virtual Reality}}: {{The Power}} of {{AR}} and {{VR}} for {{Business}}}, - shorttitle = {Augmented {{Reality}} and {{Virtual Reality}}}, - editor = {Tom Dieck, M. Claudia and Jung, Timothy}, - year = {2019}, - series = {Progress in {{IS}}}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-030-06246-0}, - urldate = {2023-05-26}, - isbn = {978-3-030-06245-3 978-3-030-06246-0}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/QCIYLSIC/Tom Dieck y Jung - 2019 - Augmented Reality and Virtual Reality The Power o.pdf} -} - -@article{tomoaia-cotiselRigorouslyInterpretedQuotation2022, - title = {Rigorously Interpreted Quotation Analysis for Evaluating Causal Loop Diagrams in Late-Stage Conceptualization}, - author = {{Tomoaia-Cotisel}, Andrada and Allen, Samuel D. and Kim, Hyunjung and Andersen, David and Chalabi, Zaid}, - year = {2022}, - month = jan, - journal = {System Dynamics Review}, - volume = {38}, - number = {1}, - pages = {41--80}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1099-1727}, - doi = {10.1002/SDR.1701}, - urldate = {2022-05-28}, - abstract = {As a field, system dynamics has made more progress in developing formal model evaluation methods that use quantitative data than ones that use qualitative data. This article describes a formal method for evaluating a causal loop diagram (CLD) in late-stage conceptualization \textendash{} referred to as rigorously interpreted quotation analysis \textendash{} and illustrates its application in a case study. The method uses a systematic and explicit interpretive process to confirm or disconfirm all diagram elements in a CLD by comparing it to stakeholders' verbatim descriptions of their experiences in a complex dynamic situation. In so doing, this method enables the resolution of discrepancies between a CLD and qualitative data, building confidence in the structural aspects of a dynamic hypothesis. It does so via a process that is approachable for experts and stakeholders alike. \textcopyright{} 2022 System Dynamics Society.} -} - -@article{toniniQualityRecyclingUrgent2022, - ids = {tonini2022a}, - title = {Quality of Recycling: {{Urgent}} and Undefined}, - author = {Tonini, Davide and Albizzati, Paola Federica and Caro, Dario and De Meester, Steven and Garbarino, Elena and Blengini, Gian Andrea}, - year = {2022}, - month = jun, - journal = {Waste Management}, - volume = {146}, - pages = {11--19}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2022.04.037}, - urldate = {2022-05-29}, - keywords = {Functional recycling,Functionality,Resource,Secondary material,Substitutability,Waste policy}, - file = {/Users/fabio/Zotero/storage/DGZ2F3FV/Tonini et al_2022_Quality of recycling.pdf;/Users/fabio/Zotero/storage/9M2V8Z7R/S0956053X22002057.html} -} - -@article{Tonn2014, - title = {Willow Pond: {{A}} Decentralized Low-Carbon Future Scenario}, - author = {Tonn, Bruce and Stiefel, Dorian}, - year = {2014}, - month = apr, - journal = {Futures}, - volume = {58}, - pages = {91--102}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2013.10.001}, - abstract = {This paper describes Willow Pond, a future residential community that is moving toward self-sufficiency. Driven by volatile food prices and supplies, volatile energy prices and supplies, economic globalization, frustration with politics, and technological convergence, the residents of Willow Pond introduced a self-sufficient structure. Home systems feature photovoltaic skins, fuel cells, and artificially intelligent home management. Local manufacturing systems feature only recyclable, reusable, and renewable materials; additive manufacturing; and sprawl farms. Willow Pond also boasts electric vehicles, immersive telecommunications, largely closed-loop water systems, redesigned community spaces, and central energy storage. Residential self-sufficiency challenges include shifting from a cash- to collaboration-based economy; managing community size to maximize efficiency; balancing technological versus human capital; and dealing with self-sufficiency versus traditional jobs, among others. ?? 2013 Elsevier Ltd. All rights reserved.}, - isbn = {00163287}, - keywords = {Decentralized governance,Home energy system,Immersive telecommunications,Local manufacturing system,Self-sufficiency,Sprawl farm}, - file = {/Users/fabio/Zotero/storage/Y4YKA3XM/Tonn, Stiefel - 2014 - Willow pond A decentralized low-carbon future scenario.pdf} -} - -@misc{Toolkit_for_assessing_changemaker_skillsPdf, - title = {Toolkit\_for\_assessing\_changemaker\_skills.Pdf} -} - -@article{topSustainableProductionTransition2022, - title = {Towards Sustainable Production for Transition to Additive Manufacturing: A Case Study in the Manufacturing Industry}, - shorttitle = {Towards Sustainable Production for Transition to Additive Manufacturing}, - author = {Top, Neslihan and Sahin, Ismail and Mangla, Sachin Kumar and Sezer, Muruvvet Deniz and Kazancoglu, Yigit}, - year = {2022}, - month = dec, - journal = {International Journal of Production Research}, - volume = {0}, - number = {0}, - pages = {1--22}, - publisher = {{Taylor \& Francis}}, - issn = {0020-7543}, - doi = {10.1080/00207543.2022.2152895}, - urldate = {2023-03-14}, - abstract = {Additive Manufacturing (AM) has emerged as an important digital technology in improving production efficiency by analysing possible environmental impacts of the operations. Therefore, this study aims to investigate the impacts of redesigned products for transition to AM on sustainable production processes. In this study, an industrial-scale product was redesigned according to AM principles and manufactured using the Fused Deposition Modelling (FDM) technique. The environmental impacts of the production methods were evaluated in terms of material consumption and carbon dioxide (CO2) emissions using the Life Cycle Assessment (LCA) method. Thus, according to LCA results, the use of a single type of material and production method for the redesigned product, as well as reducing the amount of material used by eliminating the fasteners, resulted in a 60.45\% reduction in material consumption and 85.59\% reduction in CO2 emissions compared to CM. Although the production time in CM is shorter than FDM, the necessity of a mould design and manufacture by pre-processing resulted in an increase in delivery time. Results show that the material unit costs for both manufacturing methods are very similar. This study provides various implications that create sustainable development in the manufacturing industry for the transition to AM.ABBREVIATIONS: AM, Additive Manufacturing; CAD, Computer-Aided Design; CAE, Computed-Aided Engineering; CM, Conventional Manufacturing; CNC, Computer Numerical Control; CO2, Carbon Dioxide; DFAM, Design for Additive Manufacturing; DIY, Do It Yourself; FDM, Fused Deposition Modelling; LCA, Life Cycle Assessment; LEM, Laser Engraving Machine; PLA, Polylactic Acid; SLA \textendash{} Stereolithography; SLS, Selective Laser Sintering; 3D \textendash{} Three Dimensional}, - keywords = {Additive manufacturing,environmental impacts,life cycle assessment,manufacturing industry,sustainable production}, - file = {/Users/fabio/Zotero/storage/TKJ99UY7/Top et al. - 2022 - Towards sustainable production for transition to a.pdf} -} - -@article{torchiaNewEuropeanBauhaus2023, - title = {New {{European Bauhaus}} for a {{Circular Economy}} and {{Waste Management}}: {{The Lived Experience}} of a {{Community Container Garden}} at the {{University}} of {{Turin}}}, - shorttitle = {New {{European Bauhaus}} for a {{Circular Economy}} and {{Waste Management}}}, - author = {Torchia, Daniel and Fresta, Jacopo and Corazza, Laura and Certom{\`a}, Chiara}, - year = {2023}, - month = jan, - journal = {Sustainability}, - volume = {15}, - number = {2}, - pages = {914}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2071-1050}, - doi = {10.3390/su15020914}, - urldate = {2023-09-18}, - abstract = {This study discusses the case of a 200 m2 container garden set up in a polluted and neglected area of the School of Management and Economics of the University of Turin. `L'Orto della SME' is self-managed, and it has become a hub for a variety of stakeholders, within and outside the university. The project is part of the framework Proposal for Citizen Engagement, promoted by EIT Food Cross-KIC, which contributes to the New European Bauhaus (NEB). The paper looks at how such projects contribute to create social cohesion around sustainability issues of circularity and waste management. The case presents several autoethnographic elements, like tales and stakeholders' voices, stemming from the direct involvement of the authors in developing the project. The article presents how a stakeholder network was created and how internal and external stakeholders were involved in co-creation activities, such as (multi-stakeholder) workshops and focus groups. Our findings show that NEB principles can be effectively applied to initiatives like the container garden to tackle issues of social inclusion, equality and sustainable production and consumption. This is further emphasized by the empowerment and agency gained by diverse stakeholders to approach sustainability matters.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {circular economy,community,container garden,EIT Food,New European Bauhaus,stakeholder engagement,sustainable consumption,sustainable production,university,waste management}, - file = {/Users/fabio/Zotero/storage/YRZG8Y3H/Torchia et al. - 2023 - New European Bauhaus for a Circular Economy and Wa.pdf} -} - -@article{Torraco2005, - title = {Writing {{Integrative Literature Reviews}}: {{Guidelines}} and {{Examples}}}, - author = {Torraco, Richard J.}, - year = {2005}, - month = sep, - journal = {Human Resource Development Review}, - volume = {4}, - number = {3}, - pages = {356--367}, - issn = {1534-4843}, - doi = {10.1177/1534484305278283}, - abstract = {The integrative literature review is a distinctive form of research that generates new knowledge about the topic reviewed. Little guidance is available on how to write an integrative literature review. This article discusses how to organize and write an integrative literature review and cites examples of published integrative literature reviews that illustrate how this type of research has made substantive contributions to the knowledge base of human resource development. \textcopyright{} 2005, Sage Publications. All rights reserved.}, - keywords = {integrative literature review,integrative research review: synthesis,literature review}, - file = {/Users/fabio/Zotero/storage/7RLCXQ5N/Writing Integrative Literature Reviews- Guidelines and Examples.pdf} -} - -@article{Torrado2015, - title = {Characterizing the Effect of Additives to {{ABS}} on the Mechanical Property Anisotropy of Specimens Fabricated by Material Extrusion {{3D}} Printing}, - author = {Torrado, Angel R. and Shemelya, Corey M. and English, Joel D. and Lin, Yirong and Wicker, Ryan B. and a. Roberson, David}, - year = {2015}, - month = apr, - journal = {Additive Manufacturing}, - volume = {6}, - pages = {16--29}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2015.02.001}, - urldate = {2015-03-17}, - file = {/Users/fabio/Zotero/storage/ARCPSZB7/Torrado et al. - 2015 - Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by m.pdf} -} - -@article{torrente-velasquezIdentificationInferenceFallacies2021, - title = {Identification of Inference Fallacies in Solid Waste Generation Estimations of Developing Countries. {{A}} Case-Study in {{Panama}}}, - author = {{Torrente-Vel{\'a}squez}, Jorge M. and Ripa, Maddalena and Chifari, Rosaria and Giampietro, Mario}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {126}, - pages = {454--465}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2021.03.037}, - urldate = {2021-04-29}, - abstract = {The absence of sound sampling procedures and statistical analyses to estimate solid waste generation in many developing countries has resulted in incomplete historical records of waste quantity and composition. Data is often arbitrarily aggregated or disaggregated as a function of waste generators to obtain results at the desired spatial level of analysis. Inference fallacies arising from the generalization or individualization of results are almost never considered. In this paper, Panama, one of the fastest-growing developing countries, was used as a case-study to review the main methodological approaches to estimate solid waste generation per capita per day, and at different hierarchical levels (from households to the country). The solid waste generation intensity indicator is used by the Panamanian waste management authority to run the waste management system. It was also the main parameter employed by local and foreign companies to estimate solid waste generation in Panama between 2001 and 2008. The methodological approaches used by these companies were mathematically formalized and classified as per the expressions suggested by Subramanian et al. (2009). Seven inference fallacies (ecological, individualistic, stage, floating population, linear forecasting, average population and mixed spatial levels) were identified and allocated to the studies. Foreign companies committed three of the seven inference fallacies, while one was committed by the local entity. Endogenous knowledge played an important role in these studies to avoid spatial levels mismatch and multilevel measurements appear to produce more reliable information than studies obtained via other means.}, - keywords = {Developing countries,Estimation,Inference fallacies,Meta-analysis,Multilevel analysis,Panama,Solid waste generation intensity} -} - -@article{torres-peredaImpactInterventionReducing2020, - title = {Impact of an Intervention for Reducing Waste through Educational Strategy: {{A Mexican}} Case Study, What Works, and Why?}, - author = {{Torres-Pereda}, P. and {Parra-Tapia}, E. and Rodr{\'i}guez, M.A. and {F{\'e}lix-Arellano}, E. and {Riojas-Rodr{\'i}guez}, H.}, - year = {2020}, - month = aug, - journal = {Waste Management}, - volume = {114}, - pages = {183--195}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.06.027}, - urldate = {2020-07-20} -} - -@article{Torres2021, - title = {Progress in Ecosystem Services Research: {{A}} Guide for Scholars and Practitioners}, - author = {Torres, Ang{\'e}lica Valencia and Tiwari, Chetan and Atkinson, Samuel F.}, - year = {2021}, - month = jun, - journal = {Ecosystem Services}, - volume = {49}, - pages = {101267}, - publisher = {{Elsevier B.V.}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101267}, - urldate = {2021-04-21}, - keywords = {Biodiversity conservation,Economic valuation,Ecosystem services research,Guidance,Systematic literature review}, - file = {/Users/fabio/Zotero/storage/N8WET8EQ/Torres, Tiwari, Atkinson - 2021 - Progress in ecosystem services research A guide for scholars and practitioners.pdf} -} - -@article{Toth-Tascau2012, - title = {Influence of the Energy Density on the Porosity of {{Polyamide}} Parts in {{SLS}} Process}, - author = {{Toth-Tascau}, M. and Raduta, A. and Stoia, D.I. and Locovei, C.}, - year = {2012}, - month = may, - journal = {Solid State Phenomena}, - volume = {188}, - pages = {400--405}, - issn = {10120394}, - doi = {10.4028/www.scientific.net/SSP.188.400}, - abstract = {This paper presents an experimental study about the influence of the Selective Laser Sintering process parameters on the surface and cross-section porosity of parts sintered in Polyamide PA2200 material two times recycled. Using of recycled powder affects the part structure and mechanical properties. Therefore, the paper aims to develop a suitable strategy to improve the part structure by controlling the most important SLS process parameters. The main process parameter whose influence was studied is the energy density of the laser beam. Special sample was designed and prototyped using EOS P100 prototyping machine. Three repetition jobs with different energy density of the laser beam were performed. Scanning Electron Microscopy was used to analyze the surface morphology and microstructure of the sintered benchmark parts. The relationship between the SLS parameters and part quality will extend the use of PA2200 recycled material. \textcopyright{} (2012) Trans Tech Publications.}, - isbn = {9783037853917}, - keywords = {Polyamide PA2200,Porosity,Process parameter,Scanning Electron Microscopy,Selective laser sintering}, - file = {/Users/fabio/Zotero/storage/7AAC5WTG/Influence of the energy density on the porosity of Polyamide parts in SLS process.pdf} -} - -@article{Tou2019, - title = {The Transformation of {{R}}\&{{D}} into Neo Open Innovation- a New Concept in {{R}}\&{{D}} Endeavor Triggered by Amazon}, - author = {Tou, Yuji and Watanabe, Chihiro and Moriya, Kuniko and Naveed, Nasir and Vurpillat, Victor and Neittaanm{\"a}ki, Pekka}, - year = {2019}, - month = aug, - journal = {Technology in Society}, - volume = {58}, - pages = {101141}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.05.005}, - urldate = {2020-05-21}, - abstract = {Amazon was the world's top Research and Development (R\&D) firm in 2017. Its R\&D investment was double that of 2015, five times that of 2012, and ten times that of 2011. Such a rapid and notable increase in R\&D investment has raised the question of a new R\&D definition and focus in the digital economy, which Amazon insists includes both ``routine or periodic alterations'' (traditionally classified as non-R\&D) and ``significant improvement'' (classified as R\&D). Using an empirical analysis of Amazon's R\&D model as a system, this paper attempts to provide a convincing answer to this question. It has been identified that Amazon, which is based on R\&D as a culture, has been promoting companywide experimentation to cause customers obsessed with making purchase decisions. This obsession has enabled Amazon to deploy an architecture for participation that makes the most of digital technologies by harnessing the power of users. Such user-driven innovation has accelerated a dramatic advancement of the Internet that, in turn, has accelerated the co-emergence of soft innovation resources in the marketplace. This emergence has activated a self-propagating function that has induced functionality development, leading to supra-functionality beyond an economic value that satisfies a shift in customers' preferences. While this system depends on the assimilation capacity of soft innovation resources, Amazon has developed a high level of capacity supported by a rapid and notable increase in R\&D investment. The above efforts function in a virtuous cycle leading to the transformation of ``routine or periodic alterations'' into ``significant improvement.'' These findings give rise to insightful suggestions regarding a new concept of R\&D in neo open innovation in the digital economy.}, - keywords = {Amazon,Neo open innovation,R\&D,Transformation,User-driven innovation}, - file = {/Users/fabio/Zotero/storage/3Q3CGIC9/full-text.pdf} -} - -@article{Tou2019a, - title = {Harnessing Soft Innovation Resources Leads to Neo Open Innovation}, - author = {Tou, Yuji and Watanabe, Chihiro and Moriya, Kuniko and Neittaanm{\"a}ki, Pekka}, - year = {2019}, - month = aug, - journal = {Technology in Society}, - volume = {58}, - pages = {101114}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.01.007}, - urldate = {2020-05-21}, - abstract = {Advancement of the digital economy has transformed the concept of the growth crossover in nations and firms, both concerning input and output. Advanced economies have been confronting a dilemma between input increases and output decreases. Contrary to traditional expectations, excessive increase in input has resulted in a productivity decline in output. A solution to this dilemma can only be expected by harnessing the vigor of soft innovation resources that lead to neo open innovation in the digital economy. This paper attempts to demonstrate this hypothetical view. Based on an empirical analysis of the development trajectories of 140 countries and 500 global ICT firms, dynamism, resulting in bipolarization between a virtuous cycle and a vicious cycle between input increases and productivity enhancement, was discovered. Furthermore, an empirical analysis focusing on the development trajectories of two world ICT leaders, Finland and Singapore, identified a mechanism of neo open innovation that assimilates soft innovation resources into a national production system. This mechanism can substitute for research and development (R\&D) and removes structural impediments to growth while providing relief from the increasing burden of R\&D investment. The above findings provide insightful suggestions for drafting a roadmap towards neo open innovation in the digital economy.}, - keywords = {Digital economy,Dilemma,Neo open innovation,Productivity decline,Soft innovation resources} -} - -@article{Touati2011, - title = {The Effects of Reprocessing Cycles on the Structure and Properties of Isotactic Polypropylene/{{Cloisite 15A}} Nanocomposites}, - author = {Touati, Naima and Kaci, Mustapha and Bruzaud, St{\'e}phane and Grohens, Yves}, - year = {2011}, - journal = {Polymer Degradation and Stability}, - volume = {96}, - number = {6}, - pages = {1064--1073}, - publisher = {{Elsevier Ltd}}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2011.03.015}, - abstract = {The effects of reprocessing cycles on the structure and properties of isotactic polypropylene (PP)/Cloisite 15A (OMMT) (5 wt. \%) nanocomposites was studied in presence of maleic anhydride-grafted-polypropylene (PP-g-MA) (20 wt. \%) used as the compatibiliser to improve the clay dispersion in the polymer matrix. The various nanocomposite samples were prepared by direct melt intercalation in an internal mixer, and further they were subjected to 4 reprocessing cycles. For comparative purposes, the neat PP was also processed under the same conditions. The nanocomposite structure and the clay dispersion have been characterized by wide angle X-ray scattering (WAXS), transmission electron microscopy (TEM) and rheological measurements. Other characterization techniques such as Fourier transform infrared spectroscopy (FT-IR), tensile measurements, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have also been used to evaluate the property changes induced by reprocessing. The study showed through XRD patterns that the repetitive reprocessing cycles modified the initial morphology of PP/OMMT nanocomposites by improving the formation of intercalated structure, especially after the fourth cycle. Further, the addition of PP-g-MA promoted the development of intercalated/exfoliated silicate layers in the PP matrix after the second cycle. These results are in agreement with TEM observations indicating an improved silicate dispersion in the polymer matrix with reprocessing cycles displaying a morphology with both intercalated/exfoliated structures. The initial storage modulus (G???) of the nanocomposites, which was highly improved in presence of PP-g-MA seems to be less affected by reprocessing cycles at very low frequencies exhibiting a quasi-plateau compared to pristine PP/OMMT and PP. In contrast, the complex viscosity was found to decrease for the whole samples indicating that the main effect of reprocessing was a decrease in the molecular weight. Moreover, the thermal and mechanical properties of the nanocomposites were significantly reduced after the first cycle; nevertheless they remained almost unchanged during recycling. No change in the chemical structure was observed in the FT-IR spectra for both the nanocomposites and neat PP samples after 4 cycles. ?? 2011 Elsevier Ltd. All rights reserved.}, - isbn = {0141-3910}, - keywords = {Degradation,Nanocomposites,Organoclay,Polypropylene,Reprocessing}, - file = {/Users/fabio/Zotero/storage/IV9IFFBU/Touati et al. - 2011 - The effects of reprocessing cycles on the structure and properties of isotactic polypropyleneCloisite 15A nanocom.pdf} -} - -@article{tourikiIntegratedSmartGreen2021, - title = {An Integrated Smart, Green, Resilient, and Lean Manufacturing Framework: {{A}} Literature Review and Future Research Directions}, - author = {Touriki, Fatima Ezahra and Benkhati, Imane and Kamble, Sachin S. and Belhadi, Amine and {El fezazi}, Said}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {319}, - pages = {128691}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.128691}, - urldate = {2021-09-15}, - abstract = {Today, manufacturers are under pressure to manage their activities and resources more efficiently while maximizing profitability. At the same time, they are required to minimize the adverse effects on the environment. Manufacturers are applying lean and green practices as a solution to achieve improved environmental performance. However, with the outbreak of coronavirus, this equation is highly disturbed. This has forced many manufacturers worldwide to consider the resilience of their existing manufacturing practices and realize the importance of including new paradigms based on smart green and lean principles. Nevertheless, there is a lack of literature on the integration of these paradigms and their interrelationships. This paper aims to provide an enlightening compendium on recent evolutions in this field, using a literature review to combine the four paradigms of smart, green, resilient, and lean in the manufacturing domain. The study underlines the emerging gaps and the unexplored areas in this field. Finally, we proposed two research frameworks to guide the practitioners and research scholars.} -} - -@article{TragedyCommons1968, - title = {The {{Tragedy}} of the {{Commons}}}, - year = {1968}, - month = dec, - journal = {Science}, - volume = {162}, - number = {3859}, - pages = {1243--1248}, - issn = {0036-8075}, - doi = {10.1126/science.162.3859.1243}, - file = {/Users/fabio/Zotero/storage/LBN6XGYJ/full-text.pdf} -} - -@article{trainerTechnicalCritiqueGreen2022, - title = {A Technical Critique of the {{Green New Deal}}}, - author = {Trainer, Ted}, - year = {2022}, - month = may, - journal = {Ecological Economics}, - volume = {195}, - pages = {107378}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2022.107378}, - urldate = {2022-03-08}, - abstract = {In view of the attention Green New Deal proposals have received there has been very little concern to assess its technical feasibility. It involves two major technical claims, firstly that renewable energy can sustain present societies at a relatively low cost, and secondly that economy can be decoupled from resource consumption and environmental impact. The validity of these assumptions is often taken for granted. Robert Pollin is unusual in providing arguments for them. This article puts reasons for rejecting both claims and then considers the implications for the design of sustainable and just systems. It is concluded that GND goals cannot be achieved unless there is large scale degrowth to radically different economic, social and political systems. A novel perspective on the transition, contradicting GND thinking, is indicated.}, - keywords = {100\% renewable energy,Decoupling,Degrowth,Green New Deal,Sustainability,The Simpler Way} -} - -@article{tramisEnhancementFatigueLife2021, - title = {Enhancement of the Fatigue Life of Recycled {{PP}} by Incorporation of Recycled Opaque {{PET}} Collected from Household Milk Bottle Wastes}, - author = {Tramis, O. and Garnier, C. and Yus, C. and Irusta, S. and Chabert, F.}, - year = {2021}, - month = apr, - journal = {Waste Management}, - volume = {125}, - pages = {49--57}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2021.02.006}, - urldate = {2021-03-08}, - abstract = {Opaque PET (Polyethylene terephthalate) was recently introduced as a dairy packaging, mainly for milk bottles. Opaque PET, obtained as PET filled with mineral nanoparticles, allows for a reduction of bottles' thickness, thus a cost reduction for industrials. For this reason, the use of opaque PET is steadily increasing. However, its recyclability is nowadays an issue: although the recycling channels are well established for transparent PET, the presence of opaque PET in the household wastes weakens the existing recycling channels. Besides, many initiatives are launched in Europe to turn wastes into resources, as one key to a more circular economy. One of the biggest challenges is an efficient sorting of the plastic solid wastes since the PET is not miscible with other plastics such as polypropylene (PP) from the bottle caps and polyethylene (PE) from the other milk bottles. In this work, the mechanical properties of uncompatibilized blends of opaque PET (rPET-O) with recycled polypropylene (rPP) have been studied; both are collected from household wastes. The tensile properties and the fatigue life of rPP, monitored by in-situ digital image correlation and in-situ infrared thermography, are increased by the incorporation of rPET-O. rPET-O/rPP blends may be substituted to rPP for similar applications, with no need to sort the caps from the bottles. Thus, as a concept, the incorporation of opaque PET into the PP recycling sector may be a new route to absorb some of the growing amounts of opaque PET.}, - keywords = {Fatigue tests,Household wastes,Mechanical properties,recycled opaque PET,recycled PP} -} - -@article{tranTensileStrengthEnhancement2022, - title = {Tensile {{Strength Enhancement}} of {{Fused Filament Fabrication Printed Parts}}: {{A Review}} of {{Process Improvement Approaches}} and {{Respective Impact}}}, - author = {Tran, Thang Q. and Ng, Feng Lin and Kai, Justin Tan Yu and Feih, Stefanie and Nai, Mui Ling Sharon}, - year = {2022}, - month = jun, - journal = {Additive Manufacturing}, - volume = {54}, - pages = {102724}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102724}, - urldate = {2022-03-14} -} - -@article{trigkasCircularEconomyGreek2020, - title = {Circular Economy. {{The Greek}} Industry Leaders' Way towards a Transformational Shift}, - author = {Trigkas, M. and Karagouni, G. and Mpyrou, K. and Papadopoulos, I.}, - year = {2020}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {163}, - pages = {105092}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105092}, - urldate = {2020-08-13}, - abstract = {Circular Economy (CE) has caught the eye of scholars, practitioners and policy makers. {$T$}he discussion so far seems to touch mainly the meso and macro level, while investigations on implementation issues regard mainly start-ups or new, flexible SMEs with CE-based visions. Up to date, there is extremely limited research on the challenges that well-established \textendash{} usually deeply rooted in the linear model - organizations face when deciding a shift to the CE. However, this is undeniably a major challenge and it appears that there are many questions to be answered for such established organizations which indent to apply the concept in their business models successfully. The research purports to shed some light in this direction. For that purpose, a sample of the 200 TOP business in Greece that had implemented CE procedures was surveyed in order to: a) investigate the ways that Greek leading companies try to implement CE principles in view of procedures, practices and measures; and b) identify the level of adjustment to specific national directives and EU policies. The study uncovers the difficulty of such leading business to embrace the innovativeness of the circular economy and their positioning to encounter the emergent CE issue pointing to the need of different approaches for them by policymakers. This is actually the study's main contribution: it highlights the vulnerability of large national leading companies in such radical transitions, their selective strategic choices, their insecurity and confusion and the adjustments needed to decide a transition to CE.}, - keywords = {Business strategies,Circular economy,Circular economy practices,Greece,Large national companies} -} - -@article{Trilles2018, - title = {A Comprehensive {{IoT}} Node Proposal Using Open Hardware. {{A}} Smart Farming Use Case to Monitor Vineyards}, - author = {Trilles, Sergio and {Gonz{\'a}lez-P{\'e}rez}, Alberto and Huerta, Joaqu{\'i}n}, - year = {2018}, - month = dec, - journal = {Electronicsweek}, - volume = {7}, - number = {12}, - pages = {419}, - publisher = {{MDPI AG}}, - issn = {2079-9292}, - doi = {10.3390/electronics7120419}, - abstract = {{$<$}p{$>$}The last decade has witnessed a significant reduction in prices and an increased performance of electronic components, coupled with the influence of the shift towards the generation of open resources, both in terms of knowledge (open access), programs (open-source software), and components (open hardware). This situation has produced different effects in today's society, among which is the empowerment of citizens, called makers, who are themselves able to generate citizen science or build assembly developments. Situated in the context described above, the current study follows a Do-It-Yourself (DIY) approach. In this way, it attempts to define a conceptual design of an Internet of Things (IoT) node, which is reproducible at both physical and behavioral levels, to build IoT nodes which can cover any scenario. To test this conceptual design, this study proposes a sensorization node to monitor meteorological phenomena. The node is called SEnviro (node) and features different improvements such as: the possibility of remote updates using Over-the-Air (OTA) updates; autonomy, using 3G connectivity, a solar panel, and applied energy strategies to prolong its life; and replicability, because it is made up of open hardware and other elements such as 3D-printed pieces. The node is validated in the field of smart agriculture, with the aim of monitoring different meteorological phenomena, which will be used as input to disease detection models to detect possible diseases within vineyards.{$<$}/p{$>$}}, - keywords = {Internet of things,Open hardware,Smart farming} -} - -@article{Trinh2020, - title = {A Review on the Recycling Processes of Spent Auto-Catalysts: {{Towards}} the Development of Sustainable Metallurgy}, - author = {Trinh, Ha Bich and chun Lee, Jae and jae Suh, Yong and Lee, Jaeryeong}, - year = {2020}, - journal = {Waste Management}, - volume = {114}, - pages = {148--165}, - issn = {18792456}, - doi = {10.1016/j.wasman.2020.06.030}, - urldate = {2021-01-05}, - abstract = {Spent auto-catalysts are considered as promising platinum group metals (PGMs) resources based on their rapidly increasing demand along with the underlying uncertainty of the sustainability and long-term availability of PGMs. Recycling spent auto-catalysts presents attractive advantages, particularly for the conservation of primary resources reserves, and for the reduction of negative environmental impact due to exploitation. PGM reclamation is the major aim of recycling operations despite their minor concentration in spent auto-catalysts, which implies that the remaining materials are disposed of as unwanted solid waste after the extraction process. This poses a genuine challenge, as well as a motivation to develop recycling processes for spent auto-catalysts capable of recovering all components/valuable metals, while moderating environmental pollution and global warming. The focus herein involves the description of the available technologies, including pyro- and hydro-metallurgical processes, to recover PGMs from spent auto-catalysts, and specifically an analysis of the developmental trends in recycling methods to ensure ``sustainable metallurgy''.}, - pmid = {32673979}, - keywords = {PGMs,Spent auto-catalyst,Sustainable metallurgy,Total recycling}, - file = {/Users/fabio/Zotero/storage/VZ2YLSEL/full-text.pdf} -} - -@article{trofimovExperimentallyValidatedModeling2022, - title = {Experimentally Validated Modeling of the Temperature Distribution and the Distortion during the {{Fused Filament Fabrication}} Process}, - author = {Trofimov, Anton and Le Pavic, J{\'e}r{\'e}my and Pautard, S{\'e}bastien and Therriault, Daniel and L{\'e}vesque, Martin}, - year = {2022}, - month = mar, - journal = {Additive Manufacturing}, - pages = {102693}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2022.102693}, - urldate = {2022-03-14} -} - -@article{Troger2008, - title = {Ageing of Acrylate-Based Resins for Stereolithography: Thermal and Humidity Ageing Studies}, - author = {Tr{\"o}ger, Carola and Bens, Arthur T and Bermes, G{\"u}nther and Klemmer, Ricarda and Lenz, Johannes and Irsen, Stephan}, - year = {2008}, - journal = {Rapid Prototyping Journal}, - volume = {14}, - number = {5}, - pages = {305--317}, - issn = {1355-2546}, - doi = {10.1108/13552540810907983}, - abstract = {Purpose - The purpose of this paper is to describe the ageing behaviour of acrylate-based resins for stereolithography (SL) technology using different test methods and to investigate these effects on polymers. Design/methodology/ approach - Controlling the polymer degradation requires an understanding of many different phenomena, including the different chemical mechanisms underlying structural changes in polymer macromolecules, the influences of polymer morphology, the complexities of oxidation chemistry and the complex reaction pathways of polymer additives. Several ageing characterization experiments are given. Findings - The paper covers the ageing process analysis of acrylate-based polymers. An overview of the ageing behaviour is given, along with the bandwidth of material characteristics for a prolonged lifetime of this material class. Research limitations/implications - For research and development in the field of rapid prototyping (RP) materials data about ageing behaviour and environmental effects are crucial. The authors show possible methods for measuring these effects and discuss the consequences in material research using a recently developed biocompatible SL resin as an example. Practical implications - The study of the ageing behaviour of polymers is important for understanding their usability, storage, lifetime and recycling. The presented polymeric formulations are able to meet the growing demand for both soft and stiff manufacturing resin materials in the engineering and medical fields. Originality/value - The analysis of the ageing behaviour of polymer materials is an important issue for engineering applications, recycling of post-consumer plastic waste, as well as the use of polymers as biological implants and matrices for drug delivery and the lifetime of an article. The paper gives an overview of details involving ageing behaviour and their meaning for applications of acrylate-based SL resins and is therefore of high importance to people with interest in long-term behaviour and ageing of RP materials}, - isbn = {1355-2546}, - keywords = {ageing,manufacturing systems,materials,paper type research paper,polymers,resins}, - file = {/Users/fabio/Zotero/storage/YQEKAV8Z/Tröger et al. - 2008 - Ageing of acrylate-based resins for stereolithography thermal and humidity ageing studies.pdf} -} - -@article{troullakiBridgingBarriersSustainability2021, - title = {Bridging Barriers in Sustainability Research: {{$A$}} Review from Sustainability Science to Life Cycle Sustainability Assessment}, - shorttitle = {Bridging Barriers in Sustainability Research}, - author = {Troullaki, Katerina and Rozakis, Stelios and Kostakis, Vasilis}, - year = {2021}, - month = jun, - journal = {Ecological Economics}, - volume = {184}, - pages = {107007}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2021.107007}, - urldate = {2022-09-01}, - abstract = {Sustainability science (SS) has emerged to foster inter- and transdisciplinary research practices and the creation of new, robust, actionable knowledge for navigating sustainability transitions. However, whether the research paradigm of the emerging transdisciplinary SS has permeated the relevant research body to integrate with the subfield of sustainability assessment (SA) is an open question. Aiming to investigate and enhance interdisciplinary communication in SS theory and practice, we comparatively study three literature bodies: SS, SA and Life Cycle Sustainability Assessment (LCSA). By combining conceptual analysis, bibliometric and social network analysis, and systematic content review, we explore how these research fields are and can be further interrelated. Our analysis indicates that the research paradigm of SS has hardly been embraced by SA scholars. There are however few SAs that have attempted to put SS concepts into practice and perform SAs that are both scientifically- and socially-robust. Extensive applications are needed to address current limitations and understand the feasibility and the outcomes of SS-inspired SA. Reflecting on the few empirical studies, we conclude that LCSA as currently applied cannot be a holistic and transdisciplinary framework for sustainability. An integration of life cycle- and other methods into robust, transparent and socially-embedded SA frameworks is needed, which will be enabled through communication and collaboration among SS and LCSA/SA scholars. Our paper gives insights towards this direction.}, - langid = {english}, - keywords = {Life cycle sustainability assessment,Literature review,Social network analysis,Sustainability assessment,Sustainability science,Transdisciplinary science}, - file = {/Users/fabio/Zotero/storage/9NY4Y4MP/Troullaki et al. - 2021 - Bridging barriers in sustainability research Α re.pdf;/Users/fabio/Zotero/storage/3PPU6TE6/S0921800921000653.html} -} - -@article{Troussier2017, - title = {A {{GIS-oriented}} Semantic Data Model to Support {{PLM}} for {{DfS}}}, - author = {Troussier, Nad{\`e}ge and Bratec, Florian and Vadoudi, Kiyan}, - year = {2017}, - journal = {International Journal of Product Lifecycle Management}, - volume = {10}, - number = {3}, - pages = {210}, - issn = {1743-5110}, - doi = {10.1504/IJPLM.2017.10008304}, - urldate = {2020-05-20}, - abstract = {Studying a product's environmental impact on an interacted territory's environmental status can increase decision makers' information when considering design for sustainability (DfS). Spatial representation of environmental information using geographic information systems (GIS) is an approach to analyse environmental status. This paper proposes a new data model to integrate geographical data with product related data throughout substances flows over the whole lifecycle. This model uses coupling of GIS and product lifecycle management (PLM) by unified modelling language (UML) representation. This new data model offers the possibility of enhancing sustainable products and obtaining more relevant results due to a better integration of site specificities. multidisciplinary research interests investigating the interaction between products, processes, environment and geography within the design domain. He combined geographical information with PLM and sustainability in his research with the aim to develop models and tools to support decision making in sustainable development, especially in DfS. He obtained a Master of Science in Engineering Management at the Polytechnic University of Milan in July 2012. His research activity is focused on data mining, ontologies, knowledge management, system modelling and DfS in the industrial domains. Florian Bratec is a PhD student at the University of Technology of Troyes (France). He is particularly interested in responsible design, eco-design and more generally in the evolution of practices linking design and sustainable development. Through his professional and academic experience, he specialised in environmental impact assessment at the University of Technology of Troyes, geography and cartography at the University of Orleans (France), as well as computer programming and monitoring in professional A GIS-oriented semantic data model to support PLM for DfS 211 contexts. Currently, his research focuses on new approaches to support responsible design and aims at integrating environment in companies' design schemes by combining tools and methods, such as life-cycle assessment and geographic information systems. Nad\`ege Troussier is a Professor of The University of Technology of Troyes, France, since September 2012 and is in charge of the CREIDD (interdisciplinary research center on sustainable development). Her research interest is concerned with information system for responsible design of sustainable systems. She obtained at the Grenoble Institute of Technology, France, a Master of Science in Mechanical Engineering and a Mechanical Engineering Degree in 1996, and a PhD in Mechanical Engineering in 1999. She was an Associate Professor at the University of Technology of Compi\`egne from 2000 to 2012 where she was contributing to a knowledge management and knowledge modelling approach in order to enhance the use of virtual prototyping throughout the system design process in order to manage the system performance and robustness. This paper is a revised and expanded version of a paper entitled 'GIS-oriented lifecycle management for sustainability' presented at PLM16, Columbia, 11-13 July 2016.}, - keywords = {design for sustainability,DfS,geographic information system,GIS,LCA,life cycle assessment,PLM,product data model,product lifecycle management,territory,UML,unified modelling language}, - file = {/Users/fabio/Zotero/storage/KXF27IBH/full-text.pdf} -} - -@article{Troxler2013, - title = {Making the 3 Rd {{Industrial Revolution}} - {{The Struggle}} for {{Polycentric Structures}} and a {{New Peer-Production Commons}} in the {{Fab Lab Community}}}, - author = {Troxler, Peter}, - year = {2013}, - journal = {FabLab: Of Machines, Makers and Inventors}, - number = {January 2013}, - pages = {181--194}, - publisher = {{Transcript Publishers}}, - urldate = {2022-04-19}, - abstract = {In this chapter, I will first outline the concept of the third industrial revolution and explain how Fab Labs relate to it. I will then highlight two specific issues in the development of that revolution: First, the difficulties arising from sharing and collaborative development of hardware as open source and how seeing Fab Labs as a peer-produced commons could help to resolve that issue; second, the institutional challenge that lateral power structures present and how communities and polycentric systems could provide an answer to that challenge. I will then discuss how Fab Labs can help to make the third industrial revolution happen and what I would count as a success in such a revolution. To conclude, I will present a roadmap}, - file = {/Users/fabio/Zotero/storage/5T5PADSY/full-text.pdf} -} - -@book{Troxler2016, - title = {The {{Decentralized}} and {{Networked Future}} of {{Value Creation}}}, - author = {Troxler, Peter}, - year = {2016}, - number = {January}, - doi = {10.1007/978-3-319-31686-4}, - abstract = {This book identifies, analyzes and discusses the current trends of digitalized, decentralized, and networked physical value creation by focusing on the particular example of 3D printing. In addition to evaluating 3D printing's disruptive potentials against a broader economic background, it also addresses the technology's potential impacts on sustainability and emerging modes of bottom-up and community-based innovation. Emphasizing these topics from economic, technical, social and environmental perspectives, the book offers a multifaceted overview that scrutinizes the scenario of a fundamental transition: from a centralized to a far more decentralized system of value creation.}, - isbn = {978-3-319-31684-0}, - file = {/Users/fabio/Zotero/storage/S2SPDIDN/Troxler - 2016 - The Decentralized and Networked Future of Value Creation.pdf} -} - -@article{troyesIdentificationModelisationCriteres, - title = {Identification et Mod\'elisation Des Crit\`eres de Valeur Relevant Des Dimensions Sociales , Humaines et Environnementales Pour l ' Aide \`a La D\'ecision et l ' Optimisation Du Pilotage de Projets de Syst\`emes Sociotechniques Complexes .}, - author = {Troyes, De Technologie De}, - pages = {1--12}, - file = {/Users/fabio/Zotero/storage/TB8PB96A/Sujet-Thèse.pdf} -} - -@article{Truong2020, - title = {It's Not What You Say, It's How You Say It: {{Conversational}} Flow as a Predictor of Networking Success}, - author = {Truong, Mindy and Fast, Nathanael J. and Kim, Jennifer}, - year = {2020}, - journal = {Organizational Behavior and Human Decision Processes}, - volume = {158}, - number = {March 2019}, - pages = {1--10}, - publisher = {{Elsevier}}, - issn = {07495978}, - doi = {10.1016/j.obhdp.2020.02.004}, - abstract = {Networking success, or the capacity to make new connections and develop relationships, is an increasingly important component of professional performance. Others' perceptions of one's networking skills shape success, but little is known about the factors that drive these perceptions. In the present research, we theorize that the ability to establish and maintain flow during conversations uniquely predicts individuals' networking success above and beyond other factors, such as extraversion, attractiveness, or interestingness. Consistent with this idea, Study 1 showed that individuals' ability to maintain conversational flow during live, synchronous conversations is positively associated with networking success during a speed-networking event, even after factoring in other potential predictors. In Study 2, participants reported on their existing networks, indicating that strong networkers are better at maintaining conversational flow than weak networkers. In Studies 3a-3b, we manipulated conversational flow and demonstrated that participants attribute stronger networking skills and are more eager to connect with a target who maintains high (versus low) levels of conversational flow.}, - keywords = {Conversation,Conversational flow,Networking,Social networks}, - file = {/Users/fabio/Zotero/storage/XZKA358L/It’s not what you say, it’s how you say it- Conversational flow as a predictor of networking success.pdf} -} - -@article{truongArtificialIntelligenceEnabler2022, - title = {Artificial Intelligence as an Enabler for Innovation: {{A}} Review and Future Research Agenda}, - shorttitle = {Artificial Intelligence as an Enabler for Innovation}, - author = {Truong, Yann and Papagiannidis, Savvas}, - year = {2022}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {183}, - pages = {121852}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.121852}, - urldate = {2022-08-11}, - abstract = {Innovation management has attracted considerable attention from management scholars in all disciplines given the critical importance of innovation activities to all firms. While our knowledge of the innovation process has advanced, there is little debate that the tasks within the main stages of the process remain not only resource-intensive but also fraught with ambiguity. In the meantime, Artificial Intelligence (AI) has been rising as a powerful general-purpose technology that promises to lower uncertainty with more accurate predictions and to reduce the cost of laborious tasks. Here, we perform a critical review of the literature at the intersection of artificial intelligence and innovation management to present our thoughts on the ways AI can augment innovation managers in dealing with their tasks at each of the four stages of the process. We also present the articles in this special issue and explain their contribution to advancing our knowledge on how AI can act as an enabler for innovation.}, - langid = {english}, - keywords = {Artificial intelligence,Innovation management,Innovation process,Machine learning}, - file = {/Users/fabio/Zotero/storage/KFFXZ25Y/Truong_Papagiannidis_2022_Artificial intelligence as an enabler for innovation.pdf;/Users/fabio/Zotero/storage/ZB8IVNMH/S0040162522003766.html} -} - -@article{Tsai2019, - title = {Understanding the Decision Rules for {{3D}} Printing Adoption}, - author = {Tsai, Cheng-An and Yeh, Ching-Chiang}, - year = {2019}, - journal = {Technology Analysis \& Strategic Management}, - volume = {31}, - number = {9}, - pages = {1104--1117}, - publisher = {{Taylor \& Francis}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2019.1584287}, - file = {/Users/fabio/Zotero/storage/V3RP85IA/Understanding the decision rules for 3D printing adoption.pdf} -} - -@article{Tseng2017, - title = {Screw Extrusion-Based Additive Manufacturing of {{PEEK}}}, - author = {Tseng, Jian-Wei and Liu, Chao-Yuan and Yen, Yi-Kuang and Belkner, Johannes and Bremicker, Tobias and Liu, Bernard Haochih and Sun, Ta-Ju and Wang, An-Bang}, - year = {2018}, - month = feb, - journal = {Materials \& Design}, - volume = {140}, - pages = {209--221}, - issn = {02641275}, - doi = {10.1016/j.matdes.2017.11.032}, - urldate = {2021-05-14}, - file = {/Users/fabio/Zotero/storage/4TD8GP4N/full-text.pdf} -} - -@article{Tseng2019, - title = {System Dynamics Modeling of Waste Management, Greenhouse Gas Emissions, and Environmental Costs from Convenience Stores}, - author = {Tseng, Chao-Heng and Hsu, Yi-Cheng and Chen, Ying-Chu}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {118006}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118006} -} - -@article{tsengCausalityCircularBusiness2022, - title = {Causality of Circular Business Strategy under Uncertainty: {{A}} Zero-Waste Practices Approach in Seafood Processing Industry in {{Vietnam}}}, - author = {Tseng, Ming-Lang and Tran, Thi Phuong Thuy and Ha, Hien Minh and Bui, Tat-Dat and Lim, Ming K.}, - year = {2022}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {181}, - pages = {106263}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106263}, - urldate = {2022-03-14} -} - -@article{tsengSustainablePackagedFood2020, - title = {Sustainable Packaged Food and Beverage Consumption Transition in {{Indonesia}}: {{Persuasive}} Communication to Affect Consumer Behavior}, - author = {Tseng, Ming Lang and Sujanto, Raditia Yudistira and Iranmanesh, Mohammad and Tan, Kimhua and Chiu, Anthony SF}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104933}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104933}, - urldate = {2020-06-07}, - abstract = {Sustainable consumption transition in relation to consumers' environmental behavior and manufacturers' governance of sustainability and persuasive communication has not been adequately addressed by prior studies. This study presents theory on ecological modernization, transition management and persuasive communication to address sustainable consumption transition. This study proposes a valid set of four aspects and fourteen criteria using the Delphi method. The valid attributes are analyzed using fuzzy set theory and decision-making trial and evaluation together to handle the qualitative information and interrelationships among the attributes. This procedure converts qualitative information into numerical data to create a diagram showing the interrelationships among the attributes. This study found that persuasive communication is the most effective factor in convincing consumers to transition to sustainable consumption. Other key factors for this transition include educating consumers, augmenting their knowledge and altering their attitudes toward sustainable consumption. Being environmentally friendly, product labeling, offering an authenticity argument, and reusing and recycling products are the solutions found in this study.}, - keywords = {Decision-making trial and evaluation laboratory,Ecological modernization theory,Persuasive communication,Sustainable consumption transition,Transition management theory} -} - -@article{Tsiliyannis2019, - title = {The {{Cycle}} Rate as the Means for Real-Time Monitoring of Wastes in Circular Economy}, - author = {Tsiliyannis, Christos Aristeides}, - year = {2019}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {227}, - pages = {911--931}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.04.065}, - urldate = {2020-03-21}, - abstract = {The EC circular economy waste directive sets ambitious recycling and reuse targets towards waste reduction and banning of landfills. Monitoring of wastes can lead to efficient policies and implementation of proactive measures for waste reduction. Up-to-date methods for waste monitoring in cyclic economy (CE)may not provide reliable and useful figures. Product stock-in-use and flows in CE, including waste flows, are uncertain due to varying demand and imports/exports, random, early losses of stock-in-use, delayed and distributed product returns or end-of-life exit and varying utilization of returns by remanufacturers. Adopting a systems perspective and using a dynamic/stochastic model of stock and flows in CE, this work quantifies waste monitoring and reduction under realistic conditions. It reveals how consumption and stock depletion consist the driving forces of waste generation, compensated by cyclic actions, reuse/remanufacturing and recycle. The conventional recycling rate and other key parameters, including the reuse rate, the mean lifetime, the remanufacturing rate, the number of reuse cycles, are shown inapt to accurately monitor end-wastes. None can consistently distinguish the environmentally superior system or state, featuring lower end-wastes. Higher recycling rates and/or higher reuse rates may not ensure lower wastes. Asymmetric policies (differing recycle and reuse rates)can be advantageous: higher reuse is preferable under rising stock and higher recycle under stock depletion. Sharp real-time monitoring of end-wastes is provided by the cycle rate, a dimensionless rate accounting for consumption and stock variations in CE. Its supreme efficacy is demonstrated in a robust Case study (US cellular phones)via Markov-Chain-Monte-Carlo simulation.}, - keywords = {Cellular phone waste,Circular economy,Cleaner production,Remanufacturing,Reuse,Sustainable consumption,Waste monitoring} -} - -@article{tsochatzisChemicalTestingMechanically2022, - title = {Chemical Testing of Mechanically Recycled Polyethylene Terephthalate for Food Packaging in the {{European Union}}}, - author = {Tsochatzis, E.D. and Lopes, J.Alberto and Corredig, M.}, - year = {2022}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {179}, - pages = {106096}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106096}, - urldate = {2022-01-17} -} - -@article{Tsui2020, - title = {The Role of Urban Manufacturing for a Circular Economy in Cities}, - author = {Tsui, Tanya and Peck, David and Geldermans, Bob and {van Timmeren}, Arjan}, - year = {2021}, - month = dec, - journal = {Sustainability (Switzerland)}, - volume = {13}, - number = {1}, - pages = {1--22}, - publisher = {{MDPI AG}}, - issn = {20711050}, - doi = {10.3390/su13010023}, - urldate = {2021-03-05}, - abstract = {In recent years, implementing a circular economy in cities (or ``circular cities'') has been proposed by policy makers as a potential solution for achieving sustainability. One strategy for circular cities is to reintroduce manufacturing into urban areas (or ``urban manufacturing''), allowing resource flows to be localized at the city scale. However, the extent to which urban manufacturing contributes to circular cities is unclear in existing literature. The purpose of this paper is therefore twofold: to understand whether urban manufacturing could contribute to the circular economy, and to understand the drivers and barriers to circular urban manufacturing. By reviewing existing literature and interviewing experts, we identified the caveats for the contribution of urban manufacturing to circular cities, as well as the spatial, social, and material-related drivers and barriers for circular urban manufacturing.}, - keywords = {Barriers,Circular cities,Circular economy,Drivers,Urban manufacturing}, - file = {/Users/fabio/Zotero/storage/KJILYZMG/full-text.pdf} -} - -@article{Tuck2007, - title = {Rapid Manufacturing: Impact on Supply Chain Methodologies and Practice}, - author = {Tuck, Christopher and Hague, Richard and Burns, Neil}, - year = {2007}, - journal = {International Journal of Services and Operations Management}, - volume = {3}, - number = {1}, - pages = {1--22}, - issn = {1744-2370}, - doi = {10.1504/IJSOM.2007.011459}, - abstract = {his paper demonstrates the use of Rapid Manufacturing (RM) as the enabling technology for flexible manufacturing in a number of industrial sectors. The paper discusses the evolution of Rapid Prototyping (RP) to Rapid Manufacturing and the current issues that require further research for the successful integration of this technology within manufacturing companies. The use of RM will have particular impact on supply chain management paradigms such as lean and agile and has particular strategic fit with mass customisation. The effect RM will have on these paradigms is discussed and confirmed with example cases from automotive production, motor sport and medical devices industries. In conclusion RM has already been shown in the three cases to offer benefits, particularly where fast re-configuration of the manufacturing process is required and with the production of customised components.}, - isbn = {4401509227459}, - file = {/Users/fabio/Zotero/storage/G9LI2K57/Rapid manufacturing impact on supply chain methodologies and practice.pdf} -} - -@article{tuEmergenceCooperationShared2022, - title = {The Emergence of Cooperation from Shared Goals in the Governance of Common-Pool Resources}, - author = {Tu, Chengyi and D'Odorico, Paolo and Li, Zhe and Suweis, Samir}, - year = {2022}, - month = nov, - journal = {Nature Sustainability}, - pages = {1--9}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-022-01008-1}, - urldate = {2022-12-12}, - abstract = {Sustainable use of common-pool resources is a major environmental governance challenge because of possible overexploitation. Communities devise self-governing institutions that avoid overuse and attain long-term benefits of cooperation. It is still unclear, however, what conditions allow cooperation to emerge, leading to greater long-term benefits. Until recently, studies of the sustainable governance of common-pool resources have overlooked feedback between user decisions and resource dynamics and failed to test the ability of shared goals to actually induce cooperation. Here we develop an online game to perform a set of experiments in which users of the same common-pool resource decide on their individual harvesting rates, which in turn are influenced by the resource dynamics. We show that if users share common goals, a high level of self-organized cooperation emerges, leading to long-term resource sustainability. Otherwise, selfish/individualistic behaviours lead to resource depletion. To explain these results, we develop a model of resource-decision dynamics based on optimal control theory and show how it is able to reproduce empirical results. We find that players self-organize and engage in collective action conducive to sustainable governance of common-pool resources by trade-off strategies that balance individual and collective payoff as well as short-term and long-term rewards.}, - copyright = {2022 The Author(s), under exclusive licence to Springer Nature Limited}, - langid = {english}, - keywords = {Environmental impact,Psychology and behaviour,Sustainability}, - file = {/Users/fabio/Zotero/storage/H94A7U3N/Tu et al_2022_The emergence of cooperation from shared goals in the governance of common-pool.pdf} -} - -@article{Tumpa2019, - title = {Barriers to Green Supply Chain Management: {{An}} Emerging Economy Context}, - author = {Tumpa, Tasmia Jannat and Ali, Syed Mithun and Rahman, Md Hafizur and Paul, Sanjoy Kumar and Chowdhury, Priyabrata and Rehman Khan, Syed Abdul}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - pages = {117617}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117617}, - urldate = {2020-05-15}, - abstract = {Green supply chain management is attracting increasing attention as a way to decrease the adverse environmental effects of industries worldwide. However, considering the context of an emerging economy like Bangladesh, green supply chain management is still in its inception and has not been widely embraced in the textile industry, and therefore barriers hindering its adoption in emerging economy context demand a comprehensive investigation. This research reviews the viewpoints and hurdles in adopting green supply chain management practices in the context of the Bangladeshi textile industry. A questionnaire survey of Bangladeshi textile practitioners of operations and supply chain management division, having a sample size of thirty, was undertaken to identify the barriers, and a hierarchical cluster analysis technique was used in the detailed analysis of this data. Opinions were sought from experts on the significance of the resulting clusters, considering the relative importance of the barriers. Fifteen barriers to the adoption of green supply chain management were identified in the review of the literature, with these barriers then analyzed by using the data collected from Bangladeshi textile industry practitioners. The research indicates that the most important barrier is that there is low demand from customers and financial constraint resulting from short term little financial benefit to businesses, with lack of government regulations also a commonly faced barrier in adopting green supply chain initiatives. This study will provide valuables insights to practitioners and relevant policy makers about the barriers prevailing in the emerging economies towards the adoption of green supply chain management practices, which, in turn, can guide to undertake appropriate steps for alleviating those barriers.}, - keywords = {Emerging economy,Green supply chain management process (GSCMP),Hierarchical cluster analysis,Textile industry} -} - -@article{Tunn2019, - title = {Business Models for Sustainable Consumption in the Circular Economy: {{An}} Expert Study}, - author = {Tunn, V. S.C. and Bocken, N. M.P. and {van den Hende}, E. A. and Schoormans, J. P.L.}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {324--333}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.11.290}, - urldate = {2020-03-21}, - abstract = {Combining sustainable consumption with the circular economy concept could help tackle challenges, such as resource scarcity and climate change by reducing resource throughput and increasing cycling of products and materials within the economic system, thereby reducing emissions and virgin material use. To achieve sustainable consumption in a circular economy production and consumption practices need to change. Business models can potentially influence both practices as it defines how a company conducts business and shapes the company-consumer relationship. This paper developed future business models for sustainable consumption through two rounds of semi-structured interviews with experts from academia, industry, and policy. During the first interview round, four business model elements that are important for sustainable consumption were identified: Resource strategy, Revenue model, Consumer effort, and Objective to (decrease/increase) consumption level. Based on these elements, we developed a comprehensive business model framework. Using this framework, experts envisioned future business models for sustainable consumption of clothing during the second interview round. The findings of this study suggest that the most promising business models for sustainable consumption are those that reduce overall consumption levels and consumer effort. Further, we found that a diverse range of business models in the market can potentially enable different customer segments to consume sustainably.}, - keywords = {Business model,Circular economy,Clothing industry,Expert interview,Sufficiency,Sustainable consumption} -} - -@article{Tura2018, - title = {Unlocking Circular Business: A Framework of Barriers and Drivers}, - author = {Tura, Nina and Hanski, Jyri and Ahola, Tuomas and St{\aa}hle, Matias and Piiparinen, Sini and Valkokari, Pasi}, - year = {2018}, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {90--98}, - publisher = {{Elsevier Ltd}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2018.11.202}, - abstract = {Circular economy increasingly attracts the interest of business, policy makers and academia in the search for answers to sustainability challenges. While earlier studies have presented drivers that support the introduction of new business concepts for circular economy, as well as barriers that hinder the rate of innovation in the field, no systematic categorizations of such factors have been brought forward. Drawing on current literature, a framework of drivers and barriers is introduced, including seven distinct areas: environmental, economic, social, political and institutional, technological and informational, supply chain, and organizational factors. The appearance and content of these areas in practice have been examined in four case organizations by conducting thirty-six qualitative, semi-structured interviews. Empirical illustrations of the potential barriers and drivers provide managerial implications for better execution of circular business.}, - isbn = {0015143984780}, - file = {/Users/fabio/Zotero/storage/88DUE2DS/Unlocking circular business- A framework of barriers and drivers.pdf} -} - -@article{Turkelboom2018, - title = {When We Cannot Have It All: {{Ecosystem}} Services Trade-Offs in the Context of Spatial Planning}, - author = {Turkelboom, Francis and Leone, Michael and Jacobs, Sander and Kelemen, Eszter and {Garc{\'i}a-Llorente}, Marina and Bar{\'o}, Francesc and Termansen, Mette and Barton, David N. and Berry, Pam and Stange, Erik and Thoonen, Marijke and Kal{\'o}czkai, {\'A}gnes and Vadineanu, Angheluta and Castro, Antonio J. and Cz{\'u}cz, B{\'a}lint and R{\"o}ckmann, Christine and Wurbs, Daniel and Odee, David and Preda, Elena and {G{\'o}mez-Baggethun}, Erik and Rusch, Graciela M. and Pastur, Guillermo Mart{\'i}nez and Palomo, Ignacio and Dick, Jan and Casaer, Jim and {van Dijk}, Jiska and Priess, Joerg A. and Langemeyer, Johannes and Mustajoki, Jyri and Kopperoinen, Leena and Baptist, Martin J. and Peri, Pablo Luis and Mukhopadhyay, Raktima and Aszal{\'o}s, R{\'e}ka and Roy, S. B. and Luque, Sandra and Rusch, Ver{\'o}nica}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - number = {November 2017}, - pages = {566--578}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.10.011}, - abstract = {Spatial planning has to deal with trade-offs between various stakeholders' wishes and needs as part of planning and management of landscapes, natural resources and/or biodiversity. To make ecosystem services (ES) trade-off research more relevant for spatial planning, we propose an analytical framework, which puts stakeholders, their land-use/management choices, their impact on ES and responses at the centre. Based on 24 cases from around the world, we used this framing to analyse the appearance and diversity of real-world ES trade-offs. They cover a wide range of trade-offs related to ecosystem use, including: land-use change, management regimes, technical versus nature-based solutions, natural resource use, and management of species. The ES trade-offs studied featured a complexity that was far greater than what is often described in the ES literature. Influential users and context setters are at the core of the trade-off decision-making, but most of the impact is felt by non-influential users. Provisioning and cultural ES were the most targeted in the studied trade-offs, but regulating ES were the most impacted. Stakeholders' characteristics, such as influence, impact faced, and concerns can partially explain their position and response in relation to trade-offs. Based on the research findings, we formulate recommendations for spatial planning.}, - isbn = {2041200200}, - keywords = {Ecosystem use,Property regimes,Real-world case studies,Stakeholder responses,Trade-off analytical framework}, - file = {/Users/fabio/Zotero/storage/NKK6MPPA/When-we-cannot-have-it-all--Ecosystem-services-trade-offs-i_2018_Ecosystem-S.pdf} -} - -@article{Turken2020, - title = {Supply Chain Implications of Industrial Symbiosis: {{A}} Review and Avenues for Future Research}, - author = {Turken, Nazli and Geda, Avinash}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104974}, - publisher = {{Elsevier B.V.}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104974}, - urldate = {2020-06-22}, - abstract = {Industrial symbiosis (IS) has attracted the attention of practitioners and researchers since 1972, with its inception in an industrial park in Kalundborg, Denmark. IS involves traditionally separate entities working collaboratively by exchanging wastes and sharing resources to gain competitive advantage. This collaboration among separate entities has a significant impact on the structure of supply chains and the relationships among the participating entities. In the literature, studies address IS from ecology, energy, environmental science, and materials management perspectives. However, there are not many papers that explore IS from the supply chain management perspective. In this paper, we first introduce the definition of symbiotic supply chains and provide a review and taxonomy of scholarly works in this area. We find that the majority of the researchers focus on self-organized and facilitated IS at the strategic/tactical symbiotic supply chain levels. Specifically, institutional capacity, i.e., qualitative factors that impact the capability of a group of firms to reach solutions, is explored extensively. Finally, we propose a research agenda that serves as a single source for researchers interested in exploring symbiotic supply chains.}, - keywords = {Industrial symbiosis,Supply chain implications,Sustainable supply chains} -} - -@article{Turner2015, - title = {A Review of Melt Extrusion Additive Manufacturing Processes: {{II}}. {{Materials}}, Dimensional Accuracy, and Surface Roughness}, - author = {Turner, Brian N. and Gold, Scott A}, - year = {2015}, - month = apr, - journal = {Rapid Prototyping Journal}, - volume = {21}, - number = {3}, - pages = {250--261}, - issn = {1355-2546}, - doi = {10.1108/RPJ-02-2013-0017}, - abstract = {Purpose \textendash{} The purpose of this paper is to critically review the literature related to dimensional accuracy and surface roughness for fused deposition modeling and similar extrusion-based additive manufacturing or rapid prototyping processes. Design/methodology/approach \textendash{} A systematic review of the literature was carried out by focusing on the relationship between process and product design parameters and the dimensional and surface properties of finished parts. Methods for evaluating these performance parameters are also reviewed. Findings \textendash{} Fused deposition modeling\textregistered{} and related processes are the most widely used polymer rapid prototyping processes. For many applications, resolution, dimensional accuracy and surface roughness are among the most important properties in final parts. The influence of feedstock properties and system design on dimensional accuracy and resolution is reviewed. Thermal warping and shrinkage are often major sources of dimensional error in finished parts. This phenomenon is explor...}, - isbn = {1355-2546}, - keywords = {Distortion,Fused deposition modeling,Fused filament fabrication,Material properties,Melt extrusion manufacturing,Surface roughness}, - file = {/Users/fabio/Zotero/storage/JYAYUXTY/A review of melt extrusion additive manufacturing processes II. Materials, dimensional accuracy, and surface roughness.pdf} -} - -@article{turnerEcosystemServicesValue1998, - title = {Ecosystem Services Value, Research Needs, and Policy Relevance: {{A}} Commentary}, - author = {Turner, R. K. and Adger, W. N. and Brouwer, R.}, - year = {1998}, - month = apr, - journal = {Ecological Economics}, - volume = {25}, - number = {1}, - pages = {61--65}, - publisher = {{Elsevier B.V.}}, - issn = {09218009}, - doi = {10.1016/S0921-8009(98)00018-4}, - urldate = {2021-04-23} -} - -@article{tylDesignStudyMultilevel2021, - title = {A Design Study into Multi-Level Living Labs for Reuse and Repair Activities in {{France}}}, - author = {Tyl, Benjamin and Allais, Romain}, - year = {2021}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {321}, - pages = {129032}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129032}, - urldate = {2021-09-21} -} - -@article{Tymrak2014a, - title = {Mechanical Properties of Components Fabricated with Open-Source 3-{{D}} Printers under Realistic Environmental Conditions}, - author = {Tymrak, B.M. and Kreiger, M. and Pearce, J.M.}, - year = {2014}, - month = jun, - journal = {Materials \& Design}, - volume = {58}, - pages = {242--246}, - publisher = {{Elsevier Ltd.}}, - issn = {02613069}, - doi = {10.1016/j.matdes.2014.02.038}, - urldate = {2014-02-25}, - abstract = {The recent development of the RepRap, an open-source self-replicating rapid prototyper, has made 3-D polymer-based printers readily available to the public at low costs ( {$<$} \$500). The resultant uptake of 3-D printing technology enables for the first time mass-scale distributed digital manufacturing. RepRap variants currently fabricate objects primarily from acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA), which have melting temperatures low enough to use in melt extrusion outside of a dedicated facility, while high enough for prints to retain their shape at average use temperatures. In order for RepRap printed parts to be useful for engineering applications the mechanical properties of printed parts must be known. This study quantifies the basic tensile strength and elastic modulus of printed components using realistic environmental conditions for standard users of a selection of open-source 3-D printers. The results find average tensile strengths of 28.5 MPa for ABS and 56.6 MPa for PLA with average elastic moduli of 1807 MPa for ABS and 3368 MPa for PLA. It is clear from these results that parts printed from tuned, low-cost, open-source RepRap 3-D printers can be considered as mechanically functional in tensile applications as those from commercial vendors.}, - keywords = {3-D Printing,acrylonitrile butadiene styrene,polylactic acid,Rapid prototyping,Tensile strength}, - file = {/Users/fabio/Zotero/storage/65TF2QQK/Tymrak, Kreiger, Pearce - 2014 - Mechanical properties of components fabricated with open-source 3-D printers under realistic environmen.pdf} -} - -@article{tzaninisMovingUrbanPolitical2020, - title = {Moving Urban Political Ecology beyond the `Urbanization of Nature':}, - author = {Tzaninis, Yannis and Mandler, Tait and Kaika, Maria and Keil, Roger}, - year = {2020}, - month = feb, - journal = {https://doi.org/10.1177/0309132520903350}, - volume = {45}, - number = {2}, - pages = {229--252}, - publisher = {{SAGE PublicationsSage UK: London, England}}, - doi = {10.1177/0309132520903350}, - urldate = {2021-07-21}, - abstract = {Urban political ecology (UPE) focuses on unsettling traditional understandings of `cities' as ontological entities separate from `nature' and on how the production of settlements is metabolically l...}, - keywords = {more-than-human,situated,suburbanization,urban political ecology,urbanization of nature}, - file = {/Users/fabio/Zotero/storage/PFNRA97N/full-text.pdf} -} - -@article{Tziantopoulos2019, - title = {Supply Chain Reconfiguration Opportunities Arising from Additive Manufacturing Technologies in the Digital Era}, - author = {Tziantopoulos, Konstantinos and Tsolakis, Naoum and Vlachos, Dimitrios and Tsironis, Loukas}, - year = {2019}, - month = may, - journal = {Production Planning \& Control}, - volume = {30}, - number = {7}, - pages = {510--521}, - issn = {0953-7287}, - doi = {10.1080/09537287.2018.1540052} -} - -@misc{U.S.EPA2016, - title = {Assessing {{Trends}} in {{Material Generation}}, {{Recycling}}, {{Composting}}, {{Combustion}} with {{Energy Recovery}} and {{Landfilling}} in the {{United States}}}, - author = {{U.S. EPA}}, - year = {2016}, - number = {November}, - keywords = {2014,composting,construction,demolition,disposal,facts,figures,generation,municipal,recovery,recycling,solid,WARM,waste}, - file = {/Users/fabio/Zotero/storage/3DTUZW6F/m-api-5bdaa0e4-5f4f-eac3-1480-de135b1d6c54.pdf} -} - -@article{udembaAsymmetricInferenceCarbon2022, - title = {Asymmetric Inference of Carbon Neutrality and Energy Transition Policy in {{Australia}}: {{The}} (de)Merit of Foreign Direct Investment}, - author = {Udemba, Edmund Ntom and Alola, Andrew Adewale}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {343}, - pages = {131023}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2022.131023}, - urldate = {2022-03-13}, - abstract = {The current study examines the effect caused by potential shock arising from the Australia's `Direct Action' policy in renewable energy, fossil fuel energy, and foreign direct investment (FDI). Considering the Australia's stake in the energy industrial chain system (production, distribution and marketing) that is majorly fossil fuel-based (coal and gas), it can be said that Australia is occupying a strategic position in the global climate development. For effective investigation and discussion of the findings from this study, we utilized the country's national data of 1996Q1-2018Q4 with different scientific approaches (such as structural break test and short- and long run asymmetric relationships). Emphasis on the findings and discussions is based on both the short run and long inferences arising from positive and negative shocks. The result informed that economic growth and FDI are found to negatively affect environmental quality in Australia by increasing the country's carbon emissions. This observation is inherent when there are positive and negative shocks on economic growth while only a positive shock on FDI creates an environmental effect. Further into the findings is the mitigating power of Australian renewable energy sources in its economic and environmental development. This is confirmed with positive shocks to renewable energy reducing carbon emission at the level of 23 percent while the negative shock increases carbon emissions by 16 percent. The findings imply that the economic activities and FDI penetration in Australia are done in energy cum carbon intensive ground. Additionally, evidence shows that energy transition policy is vital towards the achievement of Australian climate goal of 2030 as such a negative shock on alternative energy development such as limited energy financing and reduction or discontinued clean technology subsidies should be discouraged.}, - file = {/Users/fabio/Zotero/storage/U273T4AF/full-text.pdf} -} - -@article{Uehara2021, - title = {An Adaptive Social-Ecological System Management Matrix for Guiding Ecosystem Service Improvements}, - author = {Uehara, Takuro and Hidaka, Takeshi and Tsuge, Takahiro and Sakurai, Ryo and Cordier, Mateo}, - year = {2021}, - month = aug, - journal = {Ecosystem Services}, - volume = {50}, - pages = {101312}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101312}, - urldate = {2021-06-15}, - file = {/Users/fabio/Zotero/storage/6A5VWPWT/full-text.pdf} -} - -@article{ufodikeInvestigationThermalEvolution2021, - title = {Investigation of {{Thermal Evolution}} and {{Fluid Flow}} in the {{Hot-end}} of a {{Material Extrusion 3D Printer}} Using {{Melting Model}}}, - author = {Ufodike, Chukwuzubelu Okenwa and Nzebuka, Gaius Chukwuka}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - pages = {102502}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102502}, - urldate = {2021-11-30} -} - -@article{ukidweThermodynamicInputOutputAnalysis2009, - title = {Thermodynamic {{Input-Output Analysis}} of {{Economic}} and {{Ecological Systems}}}, - author = {Ukidwe, Nandan U. and Hau, Jorge L. and Bakshi, Bhavik R.}, - year = {2009}, - pages = {459--490}, - publisher = {{Springer, Dordrecht}}, - doi = {10.1007/978-1-4020-5737-3_23}, - urldate = {2021-09-20}, - abstract = {Ecological resources constitute the basic support system for all activity on earth. These resources include products such as air, water, minerals and crude oil and services such as carbon sequestration and pollution dissipation (Tilman et al. 2002; Daily 1997; Costanza et al. 1997; Odum 1996). However, traditional methods in engineering and economics often fail to account for the contribution of ecosystems despite their obvious importance. The focus of these methods tends to be on short-term economic objectives, while long-term sustainability issues get shortchanged. Such ignorance of ecosystems is widely believed to be one of the primary causes behind a significant and alarming deterioration of global ecological resources (WRI 2000; WWF 2000; UNEP 2002). To overcome the shortcomings of existing methods, and to make them ecologically more conscious, various techniques have been developed in recent years (Holliday et al. 2002). These techniques can be broadly divided into two categories, namely preference-based and biophysical methods. The preference-based methods use human valuation to account for ecosystem resources (AIChE 2004; Balmford et al. 2002; Bockstael et al. 2000; Costanza et al. 1997). These methods either use a single monetary unit to readily compare economic and ecological contributions, or use multi-criteria decision making to address trade-offs between indicators in completely different units. However, preference-based methods do not necessitate compliance with basic biophysical laws that all systems must satisfy, and require knowledge about the role of ecological products and services that is often inadequate or unavailable.} -} - -@article{ukobitzRelativeImpactIsomorphic2021, - title = {The Relative Impact of Isomorphic Pressures on the Adoption of Radical Technology: {{Evidence}} from {{3D}} Printing}, - author = {Ukobitz, Desir{\'e}e Valeria and Faullant, Rita}, - year = {2021}, - month = nov, - journal = {Technovation}, - pages = {102418}, - publisher = {{Elsevier}}, - issn = {0166-4972}, - doi = {10.1016/J.TECHNOVATION.2021.102418}, - urldate = {2021-12-01} -} - -@article{Ulgiati2019, - title = {Cleaner Production for Human and Environmental Well-Being}, - author = {Ulgiati, Sergio and Fiorentino, Gabriella and Raugei, Marco and Schnitzer, Hans and Lega, Massimiliano}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117779}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117779}, - urldate = {2020-05-18} -} - -@article{Umpleby2017, - title = {Systemic Solutions for Systemic Problems}, - author = {Umpleby, Stuart}, - year = {2017}, - journal = {Journal of Systems Science and Systems Engineering}, - volume = {26}, - number = {3}, - pages = {269--286}, - issn = {18619576}, - doi = {10.1007/s11518-017-5332-x}, - abstract = {The systems sciences and cybernetics emerged in the years after World War II. These fields created many new approaches to engineering and management and contributed new ideas to existing academic fields. The new fields also identified similar concepts across a range of fields and began to create a general theory of systems. In addition the systems sciences created a variety of methods for managing complex systems, for example logistics, operations research and computer simulations. In the 1970s there was concern about population and environment balance. Currently there is increasing concern with governance, since the rate of presentation of problems seems to be greater than the ability of our institutions to manage them. This paper will discuss the history of systems science and cybernetics, the questions formulated and the solutions proposed, the difficulties encountered in finding a home within contemporary universities and some exciting lines of research now underway.}, - keywords = {complexity,cybernetics,epistemology,General systems theory,systems engineering}, - file = {/Users/fabio/Zotero/storage/U3T3XFYS/Systemic solutions for systemic problems.pdf} -} - -@article{Unal2019, - title = {A Taxonomy of Circular Economy Implementation Strategies for Manufacturing Firms: {{Analysis}} of 391 Cradle-to-Cradle Products}, - author = {{\"U}nal, Enes and Shao, Jing}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {212}, - pages = {754--765}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.11.291} -} - -@article{UnderstandingGapFormal2021, - title = {Understanding the Gap between Formal and Informal E-Waste Recycling Facilities in {{India}}}, - year = {2021}, - month = apr, - journal = {Waste Management}, - volume = {125}, - pages = {163--171}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.02.045}, - urldate = {2021-03-08} -} - -@misc{UNE, - title = {{{UNE}} 116005:2012 {{Fabricaci\'on}} Por Adici\'on de Capas En Materiales...}, - author = {{UNE}}, - year = {2012}, - urldate = {2021-03-10}, - keywords = {UNE} -} - -@article{UnitedNations1972, - title = {Report of the {{United Nations Conference}} on the {{Human Environment}}}, - author = {{United Nations}}, - year = {1972}, - number = {June}, - pages = {80}, - abstract = {16/6/1972}, - file = {/Users/fabio/Zotero/storage/IECW6AVG/Report of the United Nations Conference on the Human Environment.pdf} -} - -@article{Unterfrauner2017, - title = {Makers' Ambitions to Do Socially Valuable Things}, - author = {Unterfrauner, Elisabeth and Voigt, Christian}, - year = {2017}, - journal = {The Design Journal}, - volume = {20}, - number = {sup1}, - pages = {S3317-S3325}, - publisher = {{Routledge}}, - issn = {1460-6925}, - doi = {10.1080/14606925.2017.1352835}, - abstract = {Neil Gershenfeld called the Maker movement the next digital revolution as it placed the means of fabrication on people's desks. This paper looks at makers' ambition to do socially valuable things and critically reflects on their potential impact, whether makers' societal impact can be recognised on micro- , meso- or macro-level. Paraphrasing Schumpeter, who explained innovation as a `new combination of production factors', social innovation can be defined as a new combination of social practices. To add an empirical dimension, via qualitative research we have explored the expectations and values of makers. We chose to proceed from the concrete to the abstract by approaching 30 Makers with very specific issues they knew from their day-to-day work and asked them regarding their social ambitions in terms of inclusion, education and environmentalism. Eventually these questions led then to insights on the threads we outlined above.}, - keywords = {maker culture,maker movement,maker space,openness,social innovation}, - file = {/Users/fabio/Zotero/storage/JIQT6GAG/Makers ambitions to do socially valuable things.pdf} -} - -@article{upadhyayFrameworkDesigningFrugal2023, - title = {A Framework for Designing Frugal Innovations in Marginalised Contexts}, - author = {Upadhyay, Pankaj and Punekar, Ravi Mokashi}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {410}, - pages = {137170}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137170}, - urldate = {2023-05-01}, - abstract = {Frugal innovation can be understood as the net positive result created in social contexts by implementing novel and low-resource-intensive products and services. Such products and services are uniquely suited to tackle the problems faced in low-income and marginalised contexts. Marginalised contexts are social scenarios where people have low income, low capabilities and lack access to infrastructure and institutional support. Frugal innovation can provide appropriate solutions at significantly lesser costs and with fewer resources, thus being suitable for such contexts. Although several guidelines for frugal innovation exist, well-defined approaches for its conceptualization and design, especially for marginalised contexts, are still emerging in the literature. This research presents theoretical outcomes and attempts to define an approach for frugal innovation in marginalised contexts by meeting some of the lacunae identified in existing approaches. The paper reports an in-depth retrospective case study analysis of four cases where authors had first-hand experience designing and developing frugal solutions for marginalised contexts. Project documentation, outcomes and designers' experiences in these four cases were critically analysed using known design guidelines to identify novel design strategies for effectively executing a design process. These design strategies and the insights from reviewing existing approaches were used to formulate a framework called `Frugal Design for Marginalised Context'. The framework is intended to function as a support to help practitioners implement the identified strategies systematically and effectively. The framework can help designers create holistic, frugal and meaningful solutions for social scenarios. The identified strategies can also be used as guidelines for planning design projects that tackle ill-defined and socially relevant design problems in marginalised contexts.}, - langid = {english}, - keywords = {Frugal design,Frugal innovation,Low income scenario,Marginalised context,Product-service system,Socio-technical system}, - file = {/Users/fabio/Zotero/storage/BLA8PHPX/Upadhyay_Punekar_2023_A framework for designing frugal innovations in marginalised contexts.pdf;/Users/fabio/Zotero/storage/ZSCL8UGE/S0959652623013288.html} -} - -@article{Urban2010, - title = {Towards Sustainability of Engineered Processes: {{Designing}} Self-Reliant Networks of Technological-Ecological Systems}, - author = {Urban, Robert A. and Bakshi, Bhavik R. and Grubb, Geoffrey F. and Baral, Anil and Mitsch, William J.}, - year = {2010}, - month = sep, - journal = {Computers and Chemical Engineering}, - volume = {34}, - number = {9}, - pages = {1413--1420}, - publisher = {{Pergamon}}, - issn = {00981354}, - doi = {10.1016/j.compchemeng.2010.02.026}, - urldate = {2021-09-20}, - abstract = {Sustainability of human activities is entirely dependent on the availability of ecosystem goods and services such as carbon sequestration, mineral and fossil resources, sunlight, biogeochemical cycles, soil formation, pollination, etc. However, existing methods in most disciplines, including sustainable engineering and industrial ecology ignore this crucial role played by nature. The use of such a narrow boundary can lead to misleading results and perverse decisions. This paper introduces the idea of designing networks of technological systems along with their supporting ecological systems. Such networks of technological and ecological systems exploit the synergy between them and can help in closing material loops and minimize exergy loss, leading to truly self-sustaining systems. Methods for designing such technological-ecological synergy (TES) networks could be developed by extending existing process synthesis and design approaches to include ecological models. Such an approach would integrate industrial ecology with ecological engineering and require collaboration between engineers and ecologists. It presents many new challenges and opportunities for process systems engineering to contribute to the sustainability of engineered systems. The idea of TES networks is illustrated via several practical case studies, with focus on the life cycle of corn ethanol and a typical American residential system. \textcopyright{} 2010 Elsevier Ltd.}, - keywords = {Design,Ecosystems,Life cycle,Networks,Sustainability}, - file = {/Users/fabio/Zotero/storage/QKAYTI5D/Urban et al. - 2010 - Towards sustainability of engineered processes Designing self-reliant networks of technological-ecological systems.pdf} -} - -@article{Urban2013, - title = {Techno-{{Ecological Synergy}} as a {{Path Toward Sustainability}} of a {{North American Residential System}}}, - author = {Urban, Robert A and Bakshi, Bhavik R}, - year = {2013}, - month = feb, - journal = {Environmental Science \& Technology}, - volume = {47}, - number = {4}, - pages = {1985--1993}, - issn = {0013-936X}, - doi = {10.1021/es303025c}, - urldate = {2021-09-02}, - abstract = {For any human-designed system to be sustainable, ecosystem services that support it must be readily available. This work explicitly accounts for this dependence by designing synergies between technological and ecological systems. The resulting techno-ecological network mimics nature at the systems level, can stay within ecological constraints, and can identify novel designs that are economically and environmentally attractive that may not be found by the traditional design focus on technological options. This approach is showcased by designing synergies for a typical American suburban home at local and life cycle scales. The objectives considered are carbon emissions, water withdrawal, and cost savings. Systems included in the design optimization include typical ecosystems in suburban yards: lawn, trees, water reservoirs, and a vegetable garden; technological systems: heating, air conditioning, faucets, solar panels, etc.; and behavioral variables: heating and cooling set points. The ecological and behavioral design variables are found to have a significant effect on the three objectives, in some cases rivaling and exceeding the effect of traditional technological options. These results indicate the importance and benefits of explicitly including ecosystems in the design of sustainable systems, something that is rarely done in existing methods. \textcopyright{} 2013 American Chemical Society.}, - pmid = {23294016}, - file = {/Users/fabio/Zotero/storage/JQLKVCGH/full-text.pdf} -} - -@techreport{UrbanEurope2014a, - title = {{{JPI Urban Europe}} : {{A}} Screening of {{Urban Megtrends}}}, - author = {{Urban Europe}}, - year = {2014}, - journal = {JPI Urban Europe}, - pages = {1--56} -} - -@article{Urbanic2019, - title = {A Manufacturing Cost Analysis Framework to Evaluate Machining and Fused Filament Fabrication Additive Manufacturing Approaches}, - author = {Urbanic, R. J. and Saqib, S. M.}, - year = {2019}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {102}, - number = {9-12}, - pages = {3091--3108}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-019-03394-x}, - abstract = {The goal of this research is to develop a costing framework and explore opportunities for fabricating components using additive manufacturing (AM) and machining approaches. The examples target plastic machining, and the fused deposition modeling AM process, but the general model structure is applicable for other AM processes as process knowledge is developed. The question "when is machining more cost-effective than AM" has not been comprehensively addressed. The purpose of this work is to develop a costing framework to provide insight on whether to use machining or AM. An estimation model which considers the process planning, setup, and fabrication time-cost elements is developed in a structured manner. This is challenging due to the machining process planning complexity, the decision-making, and the skill set required, especially for complex surface finish machining. This framework can be readily adapted to suit specific environments. The estimation time models are linked to a cost model, and comparisons are drawn, based on the form complexity and manufacturing quantity. An effective combination of AM and machining technologies could bring about a new hybrid manufacturing approach that meets the requirements of the next generation of production systems, especially for short-run production. A cost-benefit analysis is performed to illustrate solution approaches for designing additive, subtractive, or hybrid operation sets for a variety of components to highlight the merits of the presented approach. Exploring a larger solution space of processing options and their processing time and costs will allow designers to generate more cost-competitive solutions.}, - keywords = {Costing model framework,Fused deposition modeling,Hybrid process planning,Machining}, - file = {/Users/fabio/Zotero/storage/P2I23ERN/a manufacturing cost analysis framework to evaluate machining and fused filament fabrication additive manufacturing approaches.pdf} -} - -@article{urbanTechnologicalecologicalNetworksSustainable2009, - title = {Technological-Ecological Networks for Sustainable Process Design}, - author = {Urban, Robert A. and Bakshi, Bhavik R.}, - year = {2009}, - journal = {2009 IEEE International Symposium on Sustainable Systems and Technology, ISSST '09 in Cooperation with 2009 IEEE International Symposium on Technology and Society, ISTAS}, - doi = {10.1109/ISSST.2009.5156735}, - urldate = {2021-09-20}, - abstract = {In traditional process design, engineers aim to use man-made technology to solve practical problems. However, the resulting designs are often directly or indirectly dependent on ecosystem goods and services and this is often ignored. Neglecting these invaluable services has led to unsustainable practices through overexploitation of ecosystems. In addition, narrowly focusing on technological solutions unnecessarily prevents engineers from turning to nature as an option in process design. This paper proposes integrating technological systems and their corresponding ecological systems in process design. These technological-ecological networks (TEco-Nets) mimic the way nature operates by having closed material and energy streams, or in other words, "waste = food". Such networks would be a step towards true sustainability. However, ecological and technological systems are usually outside the area of expertise of engineers and ecologists, respectively. Therefore, integrating the two disciplines would be challenging yet potentially fruitful. In this study, the concept of TEco-Nets is illustrated through a qualitative example of a sugarcane refinery as well as quantitative case study of a residential system. The residential system example indicates that the carbon carrying capacity of the associated ecosystems is overwhelmed under traditional operating conditions. However, modifying the design of the technological and ecological systems helps alleviate this and indicates that residential systems could operate closer to sustainability in terms of carbon. This example suggests that TEco-Nets may be beneficial in larger scale industrial process design problems.}, - keywords = {Ecosystems,Green buildings,Process design,Sustainability} -} - -@article{Urbinati2017, - title = {Towards a New Taxonomy of Circular Economy Business Models}, - author = {Urbinati, Andrea and Chiaroni, Davide and Chiesa, Vittorio}, - year = {2017}, - journal = {Journal of Cleaner Production}, - volume = {168}, - pages = {487--498}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.09.047}, - abstract = {Circular Economy has undoubtedly become one of the hot topics in public debates about new and more sustainable industrial paradigms and strategies. In this respect, the fashion of Circular Economy is in the fact that it aims at overcoming the dominant linear take, make, disposal economy model, i.e. ``a traditional open-ended economy model developed with no built-in tendency to recycle, which is reflected by treating the environment as a waste reservoir'' (Su et al., 2013). Circular Economy, indeed, bases on the establishment of closed production systems, where resources are reused and kept in a loop of production and usage, allowing generating more value and for a longer period. Despite the interest for Circular Economy by politicians and practitioners, scholars, particularly in the strategic management field, are still struggling with a lack of a framework explaining how companies willing to become circular adapt their existing business model or create a new one. By extensively reviewing, through the lens of business model literature, the extant contributions on Circular Economy, we propose a taxonomy of Circular Economy Business Models based on the degree of adoption of circularity along two major dimensions: (i) the customer value proposition \& interface, i.e. the implementation of the circularity concept in proposing value to customers; (ii) the value network, i.e. the ways through which interacting with suppliers and reorganizing the own internal activities. The taxonomy is then initially tested through some explorative case studies, showing in practice the ability of the framework to properly distinguish different modes of adoption of Circular Economy.}, - isbn = {0959-6526}, - keywords = {Circular economy,Circular economy business models,Closed-loop economy}, - file = {/Users/fabio/Zotero/storage/IT8HPUTA/Towards a new taxonomy of circular economy business models.pdf} -} - -@article{urbinatiCircularBusinessModels2020, - title = {Circular Business Models in the {{European}} Manufacturing Industry: {{A}} Multiple Case Study Analysis}, - author = {Urbinati, Andrea and Rosa, Paolo and Sassanelli, Claudio and Chiaroni, Davide and Terzi, Sergio}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {274}, - pages = {122964}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122964}, - urldate = {2020-08-09}, - abstract = {Circular economy has recently emerged as an alternative industrial paradigm to the traditional ``take, make, dispose'' economic model, with the aim to promote more sustainable resource consumption patterns and production processes. However, more empirical research is needed to address the topic of how circular economy is adopted in practice by companies. In this study, we mainly adopt the lenses of circular business models and analyze three European case studies operating in the manufacturing industry that embraced circular economy principles in their business. In particular, the paper investigates and presents peculiar managerial practices to create and capture value in circular business models, and highlights the need to conceive a systemic perspective on the implementation of these practices, especially for companies operating in the manufacturing industry. Moreover, the paper shows to managers willing to embrace circular economy principles how the implementation of managerial practices for circularity can support the design of the manufacturing companies' business model within which they operate. Finally, the paper argues about the role of a peculiar external condition, i.e., the environmental regulation, in influencing the way companies implement the managerial practices for circularity.}, - keywords = {Circular business model,Circular economy,Manufacturing industry,Value capture,Value creation}, - file = {/Users/fabio/Zotero/storage/QX94IMP6/full-text.pdf} -} - -@article{urbinatiEnablersBarriersCircular2021, - title = {Enablers and {{Barriers}} for {{Circular Business Models}}: An Empirical Analysis in the {{Italian}} Automotive Industry}, - author = {Urbinati, Andrea and Franz{\`o}, Simone and Chiaroni, Davide}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {551--566}, - publisher = {{Elsevier B.V.}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.01.022}, - urldate = {2021-02-14}, - abstract = {Research stream on Circular Business Models has recently emerged within the management research to address the concept of Circular Economy from a business model perspective. Several studies in this stream have identified and analyzed a set of managerial practices that can be adopted by companies to design Circular Business Models. However, current research still falls short to provide a systematic view of the enablers and barriers for the design of Circular Business Models and the adoption of related managerial practices. The paper addresses this research gap in two ways. First, it provides a reference framework of enablers, barriers, and contextual factors affecting the design of Circular Business Models. Second, it presents the results of a survey involving 66 companies operating in the Italian automotive industry, bringing into light the relative importance of the identified enablers, barriers, and contextual factors in this industry. Finally, our research provides practical suggestions and recommendations for properly approaching the design of Circular Business Models in the automotive industry.}, - keywords = {Automotive industry,Barriers,Circular Business Models,Circular Economy,Contextual factors,Enablers,Survey} -} - -@article{Userfita, - title = {The {{User Fit}}}, - author = {Userfit, The and Userfit, Consequently}, - pages = {1--12} -} - -@article{usunMechanicalPerformance3D2021, - title = {The {{Mechanical Performance}} of the {{3D Printed Composites Produced}} with {{Continuous Carbon Fiber Reinforced Filaments Obtained}} via {{Melt Impregnation}}}, - author = {U{\c s}un, Altu{\u g} and G{\"u}mr{\"u}k, Recep}, - year = {2021}, - month = jun, - journal = {Additive Manufacturing}, - pages = {102112}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102112}, - urldate = {2021-06-18} -} - -@article{uvarovaTypology60RCircular2023, - title = {The Typology of {{60R}} Circular Economy Principles and Strategic Orientation of Their Application in Business}, - author = {Uvarova, Inga and Atstaja, Dzintra and Volkova, Tatjana and Grasis, Janis and {Ozolina-Ozola}, Iveta}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {409}, - pages = {137189}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137189}, - urldate = {2023-05-01}, - abstract = {The circular economy is one of the recent concepts promoted as the pathway for further green and sustainable development, yet entrepreneurs and managers lack the knowledge on implementing circular economy principles. Assuming the multi-dimensional and systemic character of the circular economy, this article provides a road map of 60R circular economy principles that can be adopted in any company to create a positive economic, environmental, and social impact. This set of circular economy principles allows the existing performance of companies within environmental regeneration to be assessed, and identifies possible improvements to business circularity. Identifying additional ``R" principles could lead to increased synergy or complementarity between them. These 60R circular economy principles are classified in four groups - reduce, reuse, recycle and reverse logistics. The proposed list of CE principles provides a useful framework for business managers to structure potential tasks and develop strategies for CE implementation and serve as a roadmap for researchers to extend existing research on CE principles. This study is based on the systematic literature review critically examining 148 articles and providing a comprehensive and profound overview of circular economy principles to be considered by business practitioners and entrepreneurs. Previously, CE principles are researched in environmental sciences, engineering, and energy. This article contributes to the existing knowledge gap and builds new knowledge on the discipline of business management, as publications in these fields are scarce. The study highlights the significance of reverse logistics and calls for extensive research on how companies can incorporate material or product returns into their business models or strategies, which is a critical research question for future studies.}, - langid = {english}, - keywords = {Circular business model,Circular economy principles,Circular strategies,Cleaner production,Environmental benefits,Green deal}, - file = {/Users/fabio/Zotero/storage/XUGYNN9E/Uvarova et al_2023_The typology of 60R circular economy principles and strategic orientation of.pdf} -} - -@article{Uzelgun2020, - title = {Beyond the Co-Production of Technology and Society: {{The}} Discursive Treatment of Technology with Regard to near-Term and Long-Term Environmental Goals}, - author = {{\"U}zelg{\"u}n, Mehmet Ali and Pereira, Jo{\~a}o Rui}, - year = {2020}, - journal = {Technology in Society}, - volume = {61}, - pages = {101244}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101244}, - urldate = {2020-03-23} -} - -@article{Vadoudi2014, - title = {Sustainable Product Lifecycle Management and Territoriality: {{New}} Structure for {{PLM}}}, - author = {Vadoudi, Kiyan and Allais, Romain and Reyes, Tatiana and Troussier, Nadege}, - year = {2014}, - journal = {IFIP Advances in Information and Communication Technology}, - volume = {442}, - pages = {475--484}, - issn = {18684238}, - doi = {10.1007/978-3-662-45937-9_47}, - urldate = {2020-05-20}, - abstract = {Product Lifecycle Management (PLM) is a business strategy, which aims to streamline the flow of information about products and related processes throughout the whole product's Lifecycle such that the right information in the right context at the right time can be made available. Recently some studies have been presented on general capabilities of PLM to improve sustainability paradigm, but the subject is still not solved completely. In this paper, first a critical review on the recent advances of Sustainable PLM is presented then a new structure for PLM is proposed based on combination of geographical information systems (GIS) and Lifecycle assessment (LCA), to reach an improvement on sustainable development in territorial scale for achieving a more sustainable paradigm in global scale.}, - keywords = {Geographical Information Systems,Lifecycle Assessment,Product Lifecycle Management,Sustainable Development}, - file = {/Users/fabio/Zotero/storage/89PS45S7/full-text.pdf} -} - -@inproceedings{Vadoudi2014a, - title = {Toward Sustainable Manufacturing through {{PLM}}, {{GIS}} and {{LCA}} Interaction}, - booktitle = {2014 {{International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}}: {{Engineering Responsible Innovation}} in {{Products}} and {{Services}}, {{ICE}} 2014}, - author = {Vadoudi, Kiyan and Troussier, Nadege and Zhu, Toney Wh}, - year = {2014}, - doi = {10.1109/ICE.2014.6871545}, - urldate = {2020-05-20}, - abstract = {With today's global awareness of environmental issue as well as social and economic aspects, manufacturing industry is seeking a comprehensive strategic approach to be more sustainable. By continuous sharing of information among the different product lifecycle phases, product lifecycle management acts as an information strategy, which builds a coherent data structure by consolidating systems. Moreover, when the manufacturing is happening, there is location base information available within manufacturing process, which can be used into tools to assess manufacturing process in context of sustainability. This paper presents a new information strategy framework for the green manufacturing paradigm based on integration between current PLM structure and geographical information systems. The proposed IT framework is a comprehensive qualitative answer to the question of how to design and/or improve green manufacturing systems as well as a roadmap for future quantitative research to better evaluate this new paradigm. \textcopyright{} 2014 IEEE.}, - keywords = {Eco design,Geographical Information System,Green Manufacturing,Lifecycle Assessment,Product Lifecycle Management,Sustainability}, - file = {/Users/fabio/Zotero/storage/U8SQQXBJ/full-text.pdf} -} - -@article{Vadoudi2015, - title = {E-Waste Management and Resources Recovery in {{France}}}, - author = {Vadoudi, Kiyan and Kim, Junbeum and Laratte, Bertrand and Lee, Seung-Jin and Troussier, Nad{\`e}ge}, - year = {2015}, - month = oct, - journal = {Waste Management \& Research}, - volume = {33}, - number = {10}, - pages = {919--929}, - publisher = {{SAGE Publications Ltd}}, - issn = {0734-242X}, - doi = {10.1177/0734242X15597775}, - urldate = {2020-05-24}, - abstract = {There are various issues of concern regarding electronic waste management, such as the toxicity of hazardous materials and the collection, recycling and recovery of useful resources. To understand the fate of electronic waste after collection and recycling, a products and materials flow analysis should be performed. This is a critical need, as material resources are becoming increasingly scarce and recycling may be able to provide secondary sources for new materials in the future. In this study, we investigate electronic waste systems, specifically the resource recovery or recycling aspects, as well as mapping electronic waste flows based on collection data in France. Approximately 1,588,453 t of new electrical and electronic equipment were sold in the French market in 2010. Of this amount, 430,000 t of electronic waste were collected, with the remaining 1,128,444 t remaining in stock. Furthermore, the total recycled amounts were 354,106 t and 11,396 t, respectively. The main electronic waste materials were ferrous metals (37\%), plastic (22\%), aluminium (12\%), copper (11\%) and glass (7\%). This study will contribute to developing sustainable electronic waste and resource recycling systems in France.}, - keywords = {Electronic waste (e-waste),France,recovery,recycling,resource and flows} -} - -@article{vadoudiComparingMaterialCircularity2022, - title = {Comparing a Material Circularity Indicator to Life Cycle Assessment: {{The}} Case of a Three-Layer Plastic Packaging}, - shorttitle = {Comparing a Material Circularity Indicator to Life Cycle Assessment}, - author = {Vadoudi, Kiyan and Deckers, Pieter and Demuytere, C{\'e}lestin and Askanian, Haroutioun and Verney, Vincent}, - year = {2022}, - month = aug, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2022.08.004}, - urldate = {2022-08-11}, - abstract = {There is a serious need to assess the evolution of transitions from a linear to a Circular Economy (CE) using tools, metrics, and measurement indicators that not only are able to take into account the circularity, but also the other sustainability performances of products. Currently, most measurement tools do not lead to valuable decisions, as they do not capture the performance of the CE in its entirety, resulting in poorer performance on certain aspects, such as the environment. In addition, the lack of industry-specific indicators may hinder the adaptation of CE due to the different structures and functions of products. Consequently, this paper proposes a circularity indicator adapted from the Material Circularity Indicator (MCI) for the plastic industry, specifically Multi-layer Plastic Packaging (MPP). The adapted indicator is expanded based on the quality of recycled polymers by defining a new utility factor (X) as the polymers' intensity of re-use. It also highlights that it is necessary to combine a circularity indicator with Life Cycle Assessment (LCA) for viable end-of-life (EOL) management. To illustrate the use of the proposed indicator and the trade-offs between circularity and environmental impacts, a case study on three-layer plastic packaging is applied to two end-of-life scenarios (Incineration, and closed-loop mechanical recycling). The results show that an increase in material circularity generally decreases the environmental impacts. However, recycling was found to have a higher impact than incineration on some impact categories such as land use and freshwater eutrophication.}, - langid = {english}, - keywords = {Circular economy,Circularity indicator,Closed-loop recycling,Life cycle assessment (LCA),Micro-scale,Multi-layer plastic packaging}, - file = {/Users/fabio/Zotero/storage/2D5CGMLG/S235255092200210X.html} -} - -@article{Vaezi2013, - title = {Multiple Material Additive Manufacturing \textendash{} {{Part}} 1: A Review}, - author = {Vaezi, Mohammad and Chianrabutra, Srisit and Mellor, Brian and Yang, Shoufeng}, - year = {2013}, - month = mar, - journal = {Virtual and Physical Prototyping}, - volume = {8}, - number = {1}, - pages = {19--50}, - issn = {1745-2759}, - doi = {10.1080/17452759.2013.778175}, - urldate = {2014-05-29}, - file = {/Users/fabio/Zotero/storage/NE52XLQE/Vaezi et al. - 2013 - Multiple material additive manufacturing – Part 1 a review.pdf} -} - -@article{vahidzadehRegionalIndustrialSymbiosis2020, - title = {Regional Industrial Symbiosis: {{A}} Review Based on Social Network Analysis}, - author = {Vahidzadeh, Reza and Bertanza, Giorgio and Sbaffoni, Silvia and Vaccari, Mentore}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124054}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124054}, - urldate = {2020-10-05}, - abstract = {In order to achieve more effective and inclusive environmental and economic benefits, local industrial symbiosis programs need to be expanded to a regional scale. Research on regional industrial symbiosis (RIS) covers technical and non-technical aspects that have not yet been studied in detail. The goal of this paper is to identify the main topics and trends in this field of research. After proofreading of 956 Scopus-indexed documents extracted by keyword-search, 112 papers were selected as the core literature for the quantitative review. The sample represents a 22-year period (1997- 2019), with over 63 \% of the articles published since 2015. The majority of case studies (64 \%) took place in Europe, China, the USA, and Australia. By applying social network analysis (SNA), keyword co-occurrence relations were investigated in the Gephi environment for distinguishing the main topics. The visualized network has a core-periphery structure. Six main subtopics were detected: industrial symbiosis and regional learning, waste minimization assessments, urban industrial symbiosis (UIS) and life cycle thinking, energy efficiency, operational carriers, and social aspects. Further document clustering demonstrated the division of papers in two groups representing differences in the geographical distribution of case studies, resources to be exchanged, and the organization of networks. The evolution of the sample in recent years was also examined, and its leading edges and weaker dimensions were identified. Additionally, a detailed content review is provided, which led to the mapping of main achievements and software tools under each subtopic.} -} - -@article{valenciaSocialContributionCircular2023, - title = {The Social Contribution of the Circular Economy}, - author = {Valencia, Melanie and Bocken, Nancy and Loaiza, Camila and De Jaeger, Simon}, - year = {2023}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {408}, - pages = {137082}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137082}, - urldate = {2023-05-01}, - abstract = {The social value of the circular economy (CE) has only been recently explored in the literature. To understand the social implications of the implementation of the CE, a semi-systematic literature review was completed evaluating the variables of equity, diversity, collaboration, quality of life, maturity, and governance as derived from a capabilities approach. At a societal level, this article explores the main demands and contributions of the CE to society and identifies the inconsistencies in the literature in assessing the CE as a strategy for development, counterposing views of the CE's contribution to the socioeconomic system. Furthermore, the analysis proposes a set of socioeconomic strategies that can aid a CE implementation. We expand the `rethink' tactic of the 9Rs (Refuse, Rethink, Reduce, Reuse, Repair, Refurbish, Remanufacture, Repurpose, Recycle and Recover) to also rethinking: the economic model, discourse, management strategies, ownership, business models, care work and value chains as well as remembering, reorganizing, and revitalizing. Furthermore, we include nuances to the 9Rs, adding regeneration. The qualitative assessment combined with a topic model offered specific areas where the social dimensions can be prioritized; these include food systems, the built environment with localized urban sharing, value chains, bioeconomy and mitigating the environmental impact of industries such as fashion and construction.}, - langid = {english}, - keywords = {Capabilities,Circular economy,Social circular economy,Social sustainability,Social value}, - file = {/Users/fabio/Zotero/storage/VVWEM5GL/Valencia et al_2023_The social contribution of the circular economy.pdf;/Users/fabio/Zotero/storage/PV6V53NI/S0959652623012404.html} -} - -@article{valenciaSustainabilityTransitionsUrban2022, - title = {Sustainability Transitions of Urban Food-Energy-Water-Waste Infrastructure: {{A}} Living Laboratory Approach for Circular Economy}, - author = {Valencia, Andrea and Zhang, Wei and Chang, Ni Bin}, - year = {2022}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {177}, - pages = {105991}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105991}, - urldate = {2021-11-07}, - abstract = {Urban areas often face versatile stressors (e.g., food security, congestion, energy shortage, water pollution, water scarcity, waste management, and storm and flooding), requiring better resilient and sustainable infrastructure systems. A system dynamics model (SDM), explored for the urban region of Orlando, Florida, acts as a multi-agent model for portraying material and energy flows across the food, energy, water, and waste (FEWW) sectors to account for urban sustainability transitions. The interlinkages between the FEWW sectors in the SDM are formulated with multiple layers of dependencies and interconnections of the available resources and their external climatic, environmental, and socioeconomic drivers through four case studies (scenarios). The vital components in the integrated FEWW infrastructure system include urban agriculture associated with the East End Market Urban Farm; energy from the fuel-diverse Curtis H. Stanton Energy Center; reclaimed wastewater treated by the Eastern Water Reclamation Facility, the Water Conserv II Water Reclamation Facility, and stormwater reuse; and solid waste management and biogas generation from the Orange County Landfill. The four scenarios evaluated climate change impacts, policy instruments, and land use teleconnection for waste management in the FEWW nexus, demonstrating regional synergies among these components. The use of multicriteria decision-making coupled with cost-benefit-risk tradeoff analysis supported the selection of case 4 as the most appropriate option as it provided greater renewable energy production and stormwater reuse. The SDM graphic user interface aids in the visualization of the dynamics of the FEWW nexus framework, demonstrating the specific role of renewable energy harvesting for sustainably transitioning Orlando into a circular economy.}, - keywords = {Circular economy,Food-energy-water-waste nexus,Low carbon city,System dynamic modeling,Urban agriculture,Urban sustainability} -} - -@article{valentaDecarbonisationDriveDramatic2023, - title = {Decarbonisation to Drive Dramatic Increase in Mining Waste\textendash{{Options}} for Reduction}, - author = {Valenta, Rick K. and L{\`e}bre, {\'E}l{\'e}onore and Antonio, Christian and Franks, Daniel M. and Jokovic, Vladimir and Micklethwaite, Steven and {Parbhakar-Fox}, Anita and Runge, Kym and Savinova, Ekaterina and {Segura-Salazar}, Juliana and Stringer, Martin and Verster, Isabella and Yahyaei, Mohsen}, - year = {2023}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {190}, - pages = {106859}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106859}, - urldate = {2023-02-09}, - abstract = {Global demand for energy transition metals is expected to lead to an intensification of mining activities and an increase in associated land disturbance and mine waste volumes. This paper forecasts global mine waste generation for four metals needed in batteries: copper, lithium, manganese, and nickel, and finds that waste volumes are likely to rise exponentially. Alternative extractive processes are required to achieve consequent waste reduction. Beneficial reduction outcomes include (1) smaller volumes and footprint area, (2) lower toxicity and chronic contamination, and (3) lower risk of catastrophic tailings dam failures. This paper reviews six mining and processing innovations that, if taken in combination, may achieve the needed reduction: mine waste (re)processing, environmental desulphurisation, dry-stacking and co-mingling, preconcentration and coarse particle flotation, ore-sand co-production, and in-situ recovery. None of these approaches can tackle the mine waste challenge individually, and the choice of method is site-dependent but, together, they provide promising alternatives to the current, increasingly wasteful mining practices.}, - langid = {english}, - keywords = {Metals,Mining,Projections,Tailings,Waste generation,Waste reduction}, - file = {/Users/fabio/Zotero/storage/HFXRJKRV/Valenta et al. - 2023 - Decarbonisation to drive dramatic increase in mini.pdf;/Users/fabio/Zotero/storage/G4KTWHBF/S0921344922006917.html} -} - -@article{valentinovSustainabilityClassicalInstitutional2021, - title = {Sustainability in Classical Institutional Economics: {{A}} Systems Theory View}, - author = {Valentinov, Vladislav}, - year = {2021}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {28}, - pages = {1500--1507}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2021.09.001}, - urldate = {2021-09-15} -} - -@article{Valenza1988, - title = {Recycling of Polymer Waste: {{Part II-Stress}} Degraded Polypropylene}, - author = {Valenza, A. and La Mantia, F. P.}, - year = {1988}, - journal = {Polymer Degradation and Stability}, - volume = {20}, - number = {1}, - pages = {63--73}, - issn = {01413910}, - doi = {10.1016/0141-3910(88)90094-8}, - abstract = {Rheological and mechanical properties of blends of polypropylene and degraded polypropylene have been studied. Both properties, and particularly the elongation at break, depend on the composition and on the extent of degradation. The unusual behaviour of the elongation at break is correlated with crystalline phase segregation which appears with decreasing molecular weight of the degraded component. ?? 1988.}, - file = {/Users/fabio/Zotero/storage/DGELY8KM/Recycling of polymer waste Part II-Stress degraded polypropylene.pdf} -} - -@article{Valenzuela-Levi2019, - title = {Factors Influencing Municipal Recycling in the {{Global South}}: {{The}} Case of {{Chile}}}, - author = {{Valenzuela-Levi}, Nicolas}, - year = {2019}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {150}, - pages = {104441}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104441} -} - -@article{valenzuela-leviRichRecycleMore2019, - title = {Do the Rich Recycle More? {{Understanding}} the Link between Income Inequality and Separate Waste Collection within Metropolitan Areas}, - author = {{Valenzuela-Levi}, Nicol{\'a}s}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {213}, - pages = {440--450}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.195}, - urldate = {2020-06-18}, - abstract = {The existence of inequality within societies makes one expect to observe an income gap in cities. However, it is not clear whether the income gap translates or not into a recycling gap. Barcelona and London are compared to characterise the income-recycling nexus within cities. On the one hand, in Barcelona, although the income gap is smaller, separate collection rates reproduce income disparities between local authorities. On the other hand, in London, a bigger income gap is not translated into separate collection rates. Evidence is provided to hypothesise that this difference is linked to their service financing regime. The idea that the rich recycle more because of being more educated or having different consumption patterns should be re-examined under institutional lenses. If the rich recycle more, it might be just because of regressive distribution of municipal resources. It is urgent to consider distributional issues when designing metropolitan recycling policies. Otherwise, transitions to sustainable urban environments might be restricted to affluent areas within cities.} -} - -@article{valenzuelaReverseLogisticsModels2021, - title = {Reverse Logistics Models for the Collection of Plastic Waste: {{A}} Literature Review}, - shorttitle = {Reverse Logistics Models for the Collection of Plastic Waste}, - author = {Valenzuela, Juan and Alfaro, Miguel and Fuertes, Guillermo and Vargas, Manuel and {S{\'a}ez-Navarrete}, C{\'e}sar}, - year = {2021}, - month = sep, - journal = {Waste Management \& Research}, - volume = {39}, - number = {9}, - pages = {1116--1134}, - publisher = {{SAGE Publications Ltd STM}}, - issn = {0734-242X}, - doi = {10.1177/0734242X211003948}, - urldate = {2023-08-31}, - abstract = {To support the understanding of recycling models applied to plastics, the main objective of this work is to offer a literature review of the different reverse logistics (RL) models for collecting plastic waste (PW). The methodology used for processing the scientific literature was content analysis, using the google scholar search engine. The main keywords used were RL and PW. This article is divided into two parts: the first part discusses the development of circular economy models and RL networks and raises the conceptual framework of the research, and the second part presents mathematical models and exploratory studies, proposed as a solution for RL problems of PW. Articles published between years 2014 and 2019 were reviewed. In total, 102 references were used, 70 of them are part of the literature review. According to our findings, we can state that the most widely used solution method for mathematical modeling is mixed-integer linear programming, and for exploratory studies, it was evaluations. About 93\% of studies evaluated raw materials related to PW; only 13\% of studies had models with stochastic processes; and 88\% of the investigations used continuous variables, being the multiobjective functions one of the most used to provide solutions to RL problems. Regarding the mathematical models, 49\% were evaluations, 9\% corresponded to multicriteria analysis, 29\% to linear and nonlinear programming, and 4\% to another type of evaluation or model.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/KJGW7XV8/Valenzuela et al_2021_Reverse logistics models for the collection of plastic waste.pdf} -} - -@inproceedings{Valero-Gomez2012, - title = {Printable Creativity in Plastic Valley {{UC3M}}}, - booktitle = {Proceedings of the 2012 {{IEEE Global Engineering Education Conference}} ({{EDUCON}})}, - author = {{Valero-Gomez}, Alberto and {Gonzalez-Gomez}, Juan and {Gonzalez-Pacheco}, Victor and a. Salichs, Miguel}, - year = {2012}, - month = apr, - pages = {1--9}, - publisher = {{IEEE}}, - doi = {10.1109/EDUCON.2012.6201151}, - urldate = {2014-07-07}, - isbn = {978-1-4673-1456-5}, - file = {/Users/fabio/Zotero/storage/URHCWEID/Valero-Gomez et al. - 2012 - Printable creativity in plastic valley UC3M.pdf} -} - -@article{Valino2019, - title = {Advances in {{3D}} Printing of Thermoplastic Polymer Composites and Nanocomposites}, - author = {Valino, Arnaldo D. and Dizon, John Ryan C. and Espera, Alejandro H. and Chen, Qiyi and Messman, Jamie and Advincula, Rigoberto C.}, - year = {2019}, - journal = {Progress in Polymer Science}, - volume = {98}, - pages = {101162}, - publisher = {{Elsevier Ltd}}, - issn = {00796700}, - doi = {10.1016/j.progpolymsci.2019.101162}, - abstract = {Commodity thermoplastics and thermoplastic composites are staples in Additive Manufacturing (AM). Their use is widespread and accounts for the largest volume of 3D printed materials. Accessible property ranges of current material formulations are limited, and thus there is high interest in extending AM to high-performance engineering polymers and nanocomposites that have yet to gain wide commercial acceptance in AM. Current applications of high-performance thermoplastic polymers are limited to adaptations from conventional plastics processing such as injection molding, thermoforming, extrusion, and others. Thermoplastic composites can be categorized into particle-, fiber-, and nanomaterial-based composites as well as polymer blends. The importance of these different composite systems to AM is discussed in this review. Also reviewed are trends in instrument development such as in-nozzle impregnation, dual print heads, and higher temperature FDM that improve printing of thermoplastic composites. An overview of newer types of AM techniques allowing higher filler loading for thermoplastic composites like liquid deposition modeling (LDM) sometimes known as direct ink writing (DIW) are discussed. Finally, a perspective is given on the important parameters and standards needed to make AM printed objects from polymer composites more effective in cost/performance ratio.}, - keywords = {3D printing,Additive manufacturing,Polymer blends,Processing techniques,Thermoplastic composites}, - file = {/Users/fabio/Zotero/storage/UWZQ39CW/Advances in 3D printing of thermoplastic polymer composites and nanocomposites.pdf} -} - -@article{Vallance2001, - title = {Open Design of Manufacturing Equipment}, - author = {Vallance, R and Kiani, S and Nayfeh, S}, - year = {2001}, - journal = {\ldots{} on Agile, Reconfigurable Manufacturing, \ldots}, - pages = {1--12}, - keywords = {agile manufacturing,modular machines,open design,reconfigurable}, - file = {/Users/fabio/Zotero/storage/WZYFPD9C/m-api-3b3bafc0-6e67-a3f1-5a09-02f9463515ef.pdf} -} - -@phdthesis{Vallat2017, - title = {Manager Les Connaissances Dans Un Environnement Complexe : Questions \'Ethiques , \'Epist\'emologiques et Strat\'egiques}, - author = {Vallat, David}, - year = {2017}, - file = {/Users/fabio/Zotero/storage/3DWI3NW4/HDR VALLAT v15092017.pdf} -} - -@article{valls-valHOWCanOrganisations2022, - title = {{{HOW}} Can Organisations Measure Their Level of Circularity? {{A}} Review of Available Tools}, - author = {{Valls-Val}, Karen and {Ib{\'a}{\~n}ez-For{\'e}s}, Valeria and Bovea, Mar{\'i}a D.}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {131679}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131679}, - urldate = {2022-04-11} -} - -@article{valls-valToolsAssessingQualitatively2023, - title = {Tools for Assessing Qualitatively the Level of Circularity of Organisations: {{Applicability}} to Different Sectors}, - shorttitle = {Tools for Assessing Qualitatively the Level of Circularity of Organisations}, - author = {{Valls-Val}, Karen and {Ib{\'a}{\~n}ez-For{\'e}s}, Valeria and Bovea, Mar{\'i}a D.}, - year = {2023}, - month = feb, - journal = {Sustainable Production and Consumption}, - pages = {S2352550923000234}, - issn = {23525509}, - doi = {10.1016/j.spc.2023.01.023}, - urldate = {2023-02-13}, - langid = {english} -} - -@article{valorEmotionsConsumersAdoption2022, - title = {Emotions and Consumers' Adoption of Innovations: {{An}} Integrative Review and Research Agenda}, - author = {Valor, Carmen and Antonetti, Paolo and Crisafulli, Benedetta}, - year = {2022}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {179}, - pages = {121609}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2022.121609}, - urldate = {2022-04-11} -} - -@article{vanasscheStrategyLongTerm2021, - title = {Strategy for the Long Term: {{Pressures}}, Counter-Pressures and Mechanisms in Governance}, - author = {Van Assche, Kristof and Verschraegen, Gert and Gruezmacher, Monica}, - year = {2021}, - month = aug, - journal = {Futures}, - volume = {131}, - pages = {102758}, - publisher = {{Elsevier BV}}, - issn = {00163287}, - doi = {10.1016/j.futures.2021.102758}, - urldate = {2021-06-07}, - abstract = {This special issue analyses and reflects on relations between long term perspectives and strategies in governance. While dismissing high modernist planning and acknowledging constraints to long-term policies, the different contributions in this volume, each in their own way, contend that strategy is necessary to face the challenges of our times. The fifteen articles highlight different aspects of the possibilities of and limits to strategy in governance, to turn long-term perspectives into strategy and strategy into reality. They all examine how long- term perspectives and issues are constituted by different governance practices and emerge in rather different policy contexts, which points to the need to better understand the diverse interplay between strategy, long-term perspectives and patterns of policy integration. Furthermore, the contributions emphasize how long-range governance requires careful attention to issues of temporality, the management of uncertainty and the interplay between the short term and the long term.} -} - -@article{vanbeekEnvironmentalVisualizationsFraming2020, - title = {Environmental Visualizations: {{Framing}} and Reframing between Science, Policy and Society}, - author = {{van Beek}, Lisette and Metze, Tamara and Kunseler, Eva and Huitzing, Hiddo and {de Blois}, Filip and Wardekker, Arjan}, - year = {2020}, - month = dec, - journal = {Environmental Science \& Policy}, - volume = {114}, - pages = {497--505}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2020.09.011}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/WENIFLVL/full-text.pdf} -} - -@article{vanbeekPlausibilityModelsFiction2023, - title = {Plausibility in Models and Fiction: {{What}} Integrated Assessment Modellers Can Learn from an Interaction with Climate Fiction}, - shorttitle = {Plausibility in Models and Fiction}, - author = {Van Beek, L. and Versteeg, W.}, - year = {2023}, - month = aug, - journal = {Futures}, - volume = {151}, - pages = {103195}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2023.103195}, - urldate = {2023-06-15}, - abstract = {Integrated assessment models (IAMs) are critical tools to explore possible pathways to a low-carbon future. By simulating complex interactions between social and climatic processes, they help policymakers to systematically compare mitigation policies. However, their authoritative projections of cost-effective and technically feasible pathways restrict more transformative low-carbon imaginaries, especially because IAM pathways are often understood in terms of probability rather than plausibility. We suggest an interaction with climate fiction could be helpful to address this situation. Despite fundamental differences, we argue that both IAMs and climate fiction can be seen as practices of storytelling about plausible future worlds. For this exploratory article, we staged conversations between modellers and climate fiction writers to compare their respective processes of storytelling and the content of both their stories and story-worlds, focusing specifically on how they build plausibility. Whereas modellers rely on historical observations, expert judgment, transparency and rationality to build plausibility, fiction writers build plausibility by engaging with readers' life worlds and experience, concreteness and emotionally meaningful details. Key similarities were that both modellers and fiction writers work with what-if questions, a causally connected story and build their stories through an iterative process. Based on this comparison, we suggest that an interaction between IAMs and climate fiction could be useful for improving the democratic and epistemic qualities of the IAM practice by 1) enabling a more equal dialogue between modellers and societal actors on plausible futures and 2) critically reflecting upon and broadening the spectrum of plausible futures provided by IAMs.}, - langid = {english}, - keywords = {Climate fiction,Integrated assessment model,Low-carbon futures,Mitigation scenario,Plausibility,Storytelling}, - file = {/Users/fabio/Zotero/storage/5MWJCW4Z/Van Beek y Versteeg - 2023 - Plausibility in models and fiction What integrate.pdf;/Users/fabio/Zotero/storage/5L2TG3KS/S001632872300099X.html} -} - -@article{vanboerdonkNewBusinessModels2021, - title = {New Business Models in Circular Economy: {{A}} Multiple Case Study into Touch Points Creating Customer Values in Health Care}, - author = {{van Boerdonk}, P.J.M. and Krikke, H.R. and Lambrechts, W.}, - year = {2021}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {282}, - pages = {125375}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125375}, - urldate = {2020-12-14}, - file = {/Users/fabio/Zotero/storage/UWDZ7GTJ/full-text.pdf} -} - -@article{vanbruggenSolutionfocusedSustainabilityAssessments2022, - title = {Solution-Focused Sustainability Assessments for the Transition to the Circular Economy: {{The}} Case of Plastics in the Automotive Industry}, - author = {{van Bruggen}, Anne R. and Zonneveld, Michelle and Zijp, Michiel C. and Posthuma, Leo}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {358}, - pages = {131606}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131606}, - urldate = {2022-05-23} -} - -@article{vanbuerenCircularEconomyOperating2023, - title = {The Circular Economy Operating and Stakeholder Model ``Eco-{{5HM}}'' to Avoid Circular Fallacies That Prevent Sustainability}, - author = {{van Bueren}, Bart J. A. and Argus, Kevin and {Iyer-Raniga}, Usha and Leenders, Mark A. A. M.}, - year = {2023}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {391}, - pages = {136096}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136096}, - urldate = {2023-02-10}, - abstract = {A complete operating model for circular economy (CE) would benefit policymakers, firms, academia, society and NGOs for informed decision-making relating to CE operations, tactics and strategic goals. The current prevailing paradigm of a CE operating model encompasses three CE levels: micro-level for firms, meso-level for eco-industry parks and symbiosis, and macro-level for governments and regions. This is arguably an incomplete model, causing circular fallacies, such as problem shifting, poor prioritization, and optimization of the wrong system. In this paper, a CE operating- and also stakeholder-model is explored through theory integration (TI) of CE and the related fields of sustainability, economy, governance and management. TI from these fields has a potential to unlock compounding knowledge for operations and informed decision-making for CE. The result of this TI is the ``eco Quintuple Helix Model'' (eco-5HM) which integrates the three CE levels with the hierarchical triple bottom line (TBL), nine ecosystem boundaries, three decision-making levels and the 5HM. The eco-5HM comprises five operation and stakeholder levels \textendash{} firms, governments, academia, society and environment \textendash{} each with their own systems, operations, interactions, scales and indicators. This CE operating model can better inform decision-makers for CE operations and tactics to achieve the strategic goal of sustainability.}, - langid = {english}, - keywords = {Circular economy,Circular society,Operating model,Quintuple helix,Stakeholder model,Sustainability,Theory integration}, - file = {/Users/fabio/Zotero/storage/2TJ8KD6A/van Bueren et al_2023_The circular economy operating and stakeholder model “eco-5HM” to avoid.pdf;/Users/fabio/Zotero/storage/HPBVZ47X/S0959652623002548.html} -} - -@article{vanbuerenClosingLoopholesCircular2022, - title = {Closing the Loopholes in Circular Economy Definitions and Assessments Using Ontological Criteria, with a Demonstration for {{Australia}}}, - author = {{van Bueren}, Bart J. A. and {Iyer-Raniga}, Usha and Argus, Kevin and Leenders, Mark A. A. M.}, - year = {2022}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {186}, - pages = {106554}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106554}, - urldate = {2022-08-11}, - abstract = {The burgeon concept of Circular Economy (CE) has fundamental issues hindering clarity and comprehensive assessments. This paper uses established ontological criteria to review and improve the CE definition and (assessment) frameworks. The review reveals that mainstream CE definitions and assessments are fuzzy, shift problems, oversimplified and not synchronized. This causes many loopholes that not lead towards sustainability. Therefore, an improved definition and framework is proposed, specifically for CE of XL to XS regions (scales from planetary to neighborhoods). A CE should strive towards self-sufficiency on each scale to avoid problems shifting to other regions or future society. The framework elaborates on a comprehensive systems-approach, which connects the triple bottom line across nine ecosystem processes, eight societal processes, and six economic production processes. The proposed definition and framework are demonstrated in an assessment of regional pressures and their impacts of Australia with 2020 data. The framework aims to better inform decision-makers on trade-offs between vital processes to minimize unintended problem shifting. The definition and framework have improved universal application for meaningful comparisons and optimization towards a sustainable CE in any region.}, - langid = {english}, - keywords = {Assessments,Circular economy,Planetary boundaries,Problem shifting,Regional,Self-sufficiency,System boundaries}, - file = {/Users/fabio/Zotero/storage/DA5EHN3S/S0921344922003913.html} -} - -@article{VanBuren2016, - title = {Towards a {{Circular Economy}}: {{The Role}} of {{Dutch Logistics Industries}} and {{Governments}}}, - author = {{van Buren}, Nicole and Demmers, Marjolein and {van der Heijden}, Rob and Witlox, Frank}, - year = {2016}, - month = jul, - journal = {Sustainability}, - volume = {8}, - number = {7}, - pages = {647}, - issn = {2071-1050}, - doi = {10.3390/su8070647}, - abstract = {While there is great potential in the chief values and prospects of a circular economy, this alone will not bring the circular economy to market or scale. In order for a circular economy to materialize, an integrated approach that focuses on a long-term system change or transition is required. To set the change process in motion, many (public and private) players (companies, authorities, citizens, and research institutions) need to be involved. Among the many stakeholders, a genuine enabler to implement a successful and sustainable circular strategy is the logistics industry. Given that The Netherlands is used as a case study, in this paper, we focus on the Dutch logistics industry and how this industry can contribute to the broader Dutch agenda to realize a more circular economy. It implies looking at the specific transition agenda for the logistics industry in relation to a circular economy, what barriers may exist that might hamper such a transition, and how public policy-makers are dealing with and can tackle these barriers.}, - isbn = {3247995595}, - keywords = {Barriers identification,Circular economy,Logistics industry,System change,The Netherlands,Transition}, - file = {/Users/fabio/Zotero/storage/D3CQED7T/Towards a circular economy- the role of dutch logistics industries and governments.pdf} -} - -@article{vancauwenberghTRLUnderstandingInstitutional2022, - ids = {vancauwenbergh2022a,vancauwenbergh2022b}, - title = {Beyond {{TRL}} \textendash{} {{Understanding}} Institutional Readiness for Implementation of Nature-Based Solutions}, - author = {Van Cauwenbergh, N. and Dourojeanni, P.A. and {van der Zaag}, P. and Brugnach, M. and Dartee, K. and Giordano, R. and {Lopez-Gunn}, E.}, - year = {2022}, - month = jan, - journal = {Environmental Science \& Policy}, - volume = {127}, - pages = {293--302}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.09.021}, - urldate = {2021-12-01} -} - -@article{VandenBergh2012, - title = {What Is Wrong with "Externality"?}, - author = {{Van den Bergh}, Jeroen C.J.M.}, - year = {2012}, - month = feb, - journal = {Ecological Economics}, - volume = {74}, - number = {74}, - pages = {1--2}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2011.12.008}, - urldate = {2020-05-24} -} - -@article{vandenberghSixPolicyPerspectives2020, - title = {Six Policy Perspectives on the Future of a Semi-Circular Economy}, - author = {{van den Bergh}, Jeroen C.J.M.}, - year = {2020}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {160}, - pages = {104898}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104898}, - urldate = {2020-06-07} -} - -@article{vanderveldenFixingWorldOne2021, - title = {`{{Fixing}} the {{World One Thing}} at a {{Time}}': {{Community}} Repair and a Sustainable Circular Economy}, - author = {{van der Velden}, Maja}, - year = {2021}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {304}, - pages = {127151}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.127151}, - urldate = {2021-04-29}, - file = {/Users/fabio/Zotero/storage/KJ6WHST3/full-text.pdf} -} - -@article{vanderwaalInnovativeContributionMultinational2020, - title = {The Innovative Contribution of Multinational Enterprises to the {{Sustainable Development Goals}}}, - author = {Van Der Waal, Johannes W H and Thijssens, Thomas and Maas, Karen and Dr, Handling Editor and Caeiro, Sandra}, - year = {2020}, - doi = {10.1016/j.jclepro.2020.125319}, - urldate = {2020-12-21}, - abstract = {The 2030 Agenda recognizes the role of the private sector and calls on its innovative and creative capabilities to help solve sustainable development challenges. Judging by the embracement of the SDGs in sustainability reporting, this call seems to resonate. However, the extent to which companies actually make a contribution to solving SDG challenges remains unclear. This paper aims to explore this innovative contribution to the SDGs. It does so by assessing the level of SDG relevant innovation by the largest multinational enterprises in the world. We develop a method for the identification of SDG relevant patent applications, distinguishing between "green" patents, related to environmental themes, and "blue" patents, related to "improving conditions" and meeting unmet sustainable development needs. In addition, we explore whether the level of SDG relevant innovation is systematically associated with a number of company characteristics. Our results show that large MNEs have similar levels of green patents, and lower levels of blue patents, compared to smaller companies. Using regression analysis, we find that there are regional and industry-specific differences. Corporate sustainable development attributes such as Global Compact membership and sustainability reporting, are less convincingly associated. It can be concluded that MNEs play an important role in SDG relevant innovation, but that there are trade-offs between different SDGs. Some SDG relevant innovation is not commonly associated with sustainable development. This study attempts to quantify the actual effect of sustainability strategies of companies by identifying their sustainable patents and associates this to company characteristics, using a new method for sustainable patent identification. Moreover, SDG relevant innovation is taken beyond green innovation to include the whole range of technical innovation that is related to the broad range of SDGs.}, - keywords = {Gs global challenges sustainability reporting}, - file = {/Users/fabio/Zotero/storage/XU6B4U2L/full-text.pdf} -} - -@article{Vanderwilde2021, - title = {Ecosystem Services and Life Cycle Assessment: {{A}} Bibliometric Review}, - author = {Vanderwilde, Calli P and Newell, Joshua P}, - year = {2021}, - doi = {10.1016/j.resconrec.2021.105461}, - urldate = {2021-02-28}, - abstract = {This paper uses bibliometric mapping and network analysis to review decades of research on ecosystem services and life cycle assessment (LCA). The study reveals how these two academic fields evolved to become distinct fields with little interaction despite shared environmental sustainability objectives. In assessing more than 56,000 publications, we identified just 91 LCA studies that integrate biotic ecosystem services in a meaningful way. We further classified these papers based on an ecosystem service standardization system-the Common International Classification for Ecosystem Services (CICES)-and the use of LCA midpoints and endpoints. LCA research has focused on a relatively small number of regulation and maintenance ecosystem services (especially carbon balance), with far less emphasis on provisioning services. Research on cultural services is especially scarce. Land use is a particularly promising area for integrative ecosystem services-LCA research but will require more sophisticated accounting of geographic and temporal variation, as well as the dynamic exchanges of flows between regions. We conclude by illustrating how Geographic Information Science (GIScience) can help address these challenges, enabling much deeper and wider integration of ecosystem service accounting in the LCA field.}, - file = {/Users/fabio/Zotero/storage/ZS6LZGKL/full-text.pdf} -} - -@article{VanDeVelde2002, - title = {Biopolymers: {{Overview}} of Several Properties and Consequences on Their Applications}, - author = {Van De Velde, K. and Kiekens, P.}, - year = {2002}, - journal = {Polymer Testing}, - volume = {21}, - number = {4}, - pages = {433--442}, - issn = {01429418}, - doi = {10.1016/S0142-9418(01)00107-6}, - abstract = {Recently, interest in composite manufacturing has shifted towards the use of natural fibres as reinforcement because of their environmental benefits. The use of a biodegradable matrix is worth considering since this would result in a completely biodegradable composite. In order to assess the most suitable matrix polymer, one must know the properties of the available polymers. Since data tend to be widely scattered over many sources and are very scarce compared to the conventional polymers, it is the purpose of this article to give an overview of the most relevant properties of a range of biodegradable polymers. An overview such as the one given here may provide a useful guide in establishing the best compromise between conflicting property demands. Data are presented mostly as ranges (in tables) as well as in graphs for quick comparison reasons. One specific application (thermoplastic pultrusion with flax as reinforcement) is also studied. ?? 2002 Elsevier Science Ltd. All rights reserved.}, - isbn = {0142-9418}, - pmid = {174868600011}, - keywords = {Biopolymers}, - file = {/Users/fabio/Zotero/storage/C5FALDU3/Biopolymers Overview of several properties and consequences on their applications.pdf} -} - -@article{vandevoordeEffectExtrusionFused2021, - title = {Effect of Extrusion and Fused Filament Fabrication Processing Parameters of Recycled Poly(Ethylene Terephthalate) on the Crystallinity and Mechanical Properties}, - author = {{Van de Voorde}, Babs and Katalagarianakis, Amalia and Huysman, Sofie and Toncheva, Antoniya and Raquez, Jean-Marie and Duretek, Ivica and Holzer, Clemens and Cardon, Ludwig and Bernaerts, Katrien V. and Van Hemelrijck, Danny and Pyl, Lincy and Van Vlierberghe, Sandra}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - pages = {102518}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102518}, - urldate = {2021-11-30} -} - -@article{VanDijk2018, - title = {Editorial: {{Operationalisation}} of Natural Capital and Ecosystem Services \textendash{} {{Special}} Issue}, - author = {{van Dijk}, Jiska and Dick, Jan and Harrison, Paula and Jax, Kurt and Saarikoski, Heli and Furman, Eeva}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {411--414}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.11.013}, - file = {/Users/fabio/Zotero/storage/YB6TVX4N/Editorial--Operationalisation-of-natural-capital-and-ecosys_2018_Ecosystem-S.pdf} -} - -@article{vandijkExperimentalGamesSocial2021, - title = {Experimental {{Games}} and {{Social Decision Making}}}, - author = {{van Dijk}, Eric and De Dreu, Carsten K.W.}, - year = {2021}, - month = jan, - journal = {Annual Review of Psychology}, - volume = {72}, - number = {1}, - pages = {415--438}, - publisher = {{Annual Reviews}}, - issn = {0066-4308}, - doi = {10.1146/annurev-psych-081420-110718}, - urldate = {2021-01-13}, - abstract = {Experimental games model situations in which the future outcomes of individuals and groups depend on their own choices and on those of other (groups of) individuals. Games are a powerful tool to identify the neural and psychological mechanisms underlying interpersonal and group cooperation and coordination. Here we discuss recent developments in how experimental games are used and adapted, with an increased focus on repeated interactions, partner control through sanctioning, and partner (de)selection for future interactions. Important advances have been made in uncovering the neurobiological underpinnings of key factors involved in cooperation and coordination, including social preferences, cooperative beliefs, (emotion) signaling, and, in particular, reputations and (in)direct reciprocity. Emerging trends at the cross-sections of psychology, economics, and the neurosciences include an increased focus on group heterogeneities, intergroup polarization and conflict, cross-cultural differences in cooperation and norm enforcement, and neurocomputational modeling of the formation and updating of social preferences and beliefs.}, - keywords = {collective action,conflict,cooperation,games,social interaction,social norms} -} - -@article{VanDoorn2021, - title = {The Warm Glow of Recycling Can Make Us More Wasteful}, - author = {{van Doorn}, Jenny and Kurz, Tim}, - year = {2021}, - month = oct, - journal = {Journal of Environmental Psychology}, - volume = {77}, - pages = {101672}, - publisher = {{Academic Press}}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2021.101672}, - urldate = {2021-08-24}, - file = {/Users/fabio/Zotero/storage/YC93AJAC/full-text.pdf} -} - -@article{vandorsserIntegratedFrameworkAnticipating2020, - title = {An Integrated Framework for Anticipating the Future and Dealing with Uncertainty in Policymaking}, - author = {{van Dorsser}, Cornelis and Taneja, Poonam and Walker, Warren and Marchau, Vincent}, - year = {2020}, - month = jun, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2020.102594}, - urldate = {2020-06-18}, - file = {/Users/fabio/Zotero/storage/HZ379J6X/full-text.pdf} -} - -@book{VanEck2007, - title = {Advances in {{Data Analysis}}}, - author = {{van Eck}, Nees Jan and Waltman, Ludo}, - editor = {Decker, Reinhold and Lenz, Hans -J.}, - year = {2007}, - journal = {Advances in Data Analysis}, - publisher = {{Springer Berlin Heidelberg}}, - address = {{Berlin, Heidelberg}}, - issn = {14318814}, - doi = {10.1007/978-3-540-70981-7}, - abstract = {We present a new method for visualizing similarities between objects. The method is called VOS, which is an abbreviation for visualization of similarities. The aim of VOS is to provide a low-dimensional visualization in which objects are located in such a way that the distance between any pair of objects reflects their similarity as accurately as possible. Because the standard approach to visualizing similarities between objects is to apply multidimensional scaling, we pay special attention to the relationship between VOS and multidimensional scaling.}, - isbn = {978-3-540-70980-0}, - file = {/Users/fabio/Zotero/storage/EMU2DPFU/VOS A new method for visualizing similarities between objects.pdf} -} - -@article{VanEck2010, - title = {Software Survey: {{VOSviewer}}, a Computer Program for Bibliometric Mapping}, - author = {{van Eck}, Nees Jan and Waltman, Ludo}, - year = {2010}, - month = aug, - journal = {Scientometrics}, - volume = {84}, - number = {2}, - eprint = {0803.1716}, - pages = {523--538}, - issn = {0138-9130}, - doi = {10.1007/s11192-009-0146-3}, - abstract = {We present VOSviewer, a freely available computer program that we have developed for constructing and viewing bibliometric maps. Unlike most computer programs that are used for bibliometric mapping, VOSviewer pays special attention to the graphical representation of bibliometric maps. The functionality of VOSviewer is especially useful for displaying large bibliometric maps in an easy-to-interpret way. The paper consists of three parts. In the first part, an overview of VOSviewer's functionality for displaying bibliometric maps is provided. In the second part, the technical implementation of specific parts of the program is discussed. Finally, in the third part, VOSviewer's ability to handle large maps is demonstrated by using the program to construct and display a co-citation map of 5,000 major scientific journals.}, - archiveprefix = {arxiv}, - isbn = {2175-1935}, - pmid = {20585380}, - keywords = {Bibliometric mapping,Journal co-citation analysis,Science mapping,Visualization,VOS,VOSviewer}, - file = {/Users/fabio/Zotero/storage/832M9XK7/Software survey VOSviewer, a computer program for bibliometric mapping.pdf} -} - -@article{VanEck2011, - title = {Phylomemetic {{Patterns}} in {{Science Evolution}}\textemdash{{The Rise}} and {{Fall}} of {{Scientific Fields}}}, - author = {Chavalarias, David and Cointet, Jean-Philippe}, - editor = {Altmann, Eduardo G.}, - year = {2013}, - month = feb, - journal = {PLoS ONE}, - volume = {8}, - number = {2}, - eprint = {1109.2058}, - pages = {e54847}, - issn = {1932-6203}, - doi = {10.1371/journal.pone.0054847}, - abstract = {VOSviewer is a computer program for creating, visualizing, and exploring bibliometric maps of science. In this report, the new text mining functionality of VOSviewer is presented. A number of examples are given of applications in which VOSviewer is used for analyzing large amounts of text data.}, - archiveprefix = {arxiv}, - isbn = {0138-9130}, - pmid = {23408947}, - keywords = {()}, - file = {/Users/fabio/Zotero/storage/3C7ECQSV/Phylomemetic Patterns in Science Evolution—The Rise and Fall of Scientific Fields.pdf} -} - -@article{vanegmondSustainabilitySearchIntegral2011, - title = {Sustainability: {{The}} Search for the Integral Worldview}, - author = {{van Egmond}, N. D. and {de Vries}, H. J.M.}, - year = {2011}, - month = oct, - journal = {Futures}, - volume = {43}, - number = {8}, - pages = {853--867}, - publisher = {{Pergamon}}, - issn = {00163287}, - doi = {10.1016/j.futures.2011.05.027}, - urldate = {2020-05-27}, - abstract = {The sustainability problem is described as a process of recurrent destabilization of societal value orientations or worldviews. These worldviews represent both value orientations with respect to 'quality of life' and mental maps about the surrounding world. The many different worldviews which shape society appear to be part of an overall integral worldview which can be deduced from societal enquiries and from the experiences of history and philosophy over many centuries. This integral worldview is defined by the vertical contrast between idealism and materialism and the horizontal contrast between uniformity and diversity. Due to a number of societal and psychological centrifugal forces, worldviews become one-sided and finally end in fundamentalist value orientations which are synonym with overshoot, collapse and crisis. Examples are religious fundamentalism and related wars, communism, nazism, the ecological crisis as well as the recent financial crisis.The solution to these sustainability problems has to be found in the timely recognition and compensation of the destabilizing centrifugal forces. The resulting integral worldview is synonym with 'human dignity'. The thus defined time independent notion of human dignity defines a new ethical framework and solves the paradox between the needs of present and future generations in Brundtland's original definition of sustainable development. \textcopyright{} 2011 Elsevier Ltd.}, - file = {/Users/fabio/Zotero/storage/8HLJLDH9/full-text.pdf} -} - -@article{VanEwijk2020, - title = {Recognising Waste Use Potential to Achieve a Circular Economy}, - author = {{van Ewijk}, Stijn and Stegemann, Julia A.}, - year = {2020}, - month = mar, - journal = {Waste Management}, - volume = {105}, - pages = {1--7}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.01.019}, - file = {/Users/fabio/Zotero/storage/V5X8CCSK/Recognising waste use potential to achieve a circular economy.pdf} -} - -@article{VanEygen2018, - title = {Integrating {{High-Resolution Material Flow Data}} into the {{Environmental Assessment}} of {{Waste Management System Scenarios}}: {{The Case}} of {{Plastic Packaging}} in {{Austria}}}, - author = {Van Eygen, Emile and Laner, David and Fellner, Johann}, - year = {2018}, - month = oct, - journal = {Environmental Science \& Technology}, - volume = {52}, - number = {19}, - pages = {10934--10945}, - issn = {0013-936X}, - doi = {10.1021/acs.est.8b04233} -} - -@article{VanEygen2018a, - title = {Circular Economy of Plastic Packaging: {{Current}} Practice and Perspectives in {{Austria}}}, - author = {Van Eygen, Emile and Laner, David and Fellner, Johann}, - year = {2018}, - month = feb, - journal = {Waste Management}, - volume = {72}, - pages = {55--64}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2017.11.040} -} - -@article{VanFan2019, - title = {Cross-Disciplinary {{Approaches Towards Smart}}, {{Resilient}} and {{Sustainable Circular Economy}}}, - author = {Van Fan, Yee and Lee, Chew Tin and Lim, Jeng Shiun and Kleme{\v s}, Ji{\v r}{\'i} Jarom{\'i}r and Kim Le, Phung Thi}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {232}, - pages = {1482--1491}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.266}, - file = {/Users/fabio/Zotero/storage/Q4T4QSFD/Cross-disciplinary approaches towards smart, resilient and sustainable circular economy.pdf} -} - -@article{Vanhamaki2020, - title = {Transition towards a Circular Economy at a Regional Level: {{A}} Case Study on Closing Biological Loops}, - author = {Vanham{\"a}ki, S. and Virtanen, M. and Luste, S. and Manskinen, K.}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {156}, - pages = {104716}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104716} -} - -@article{vanloonCircularProductsBusiness2020, - title = {Circular Products and Business Models and Environmental Impact Reductions: Current Knowledge and Knowledge Gaps}, - author = {{van Loon}, Patricia and Diener, Derek and Harris, Steve}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - pages = {125627}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125627}, - urldate = {2021-01-01}, - file = {/Users/fabio/Zotero/storage/S5JKLEMT/full-text.pdf} -} - -@article{VanRensburg2019, - title = {Society 4.0 Applied in {{Africa}}: {{Advancing}} the Social Impact of Technology}, - author = {Van Rensburg, Nickey Janse and Telukdarie, Arnesh and Dhamija, Pavitra}, - year = {2019}, - month = nov, - journal = {Technology in Society}, - volume = {59}, - pages = {101125}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2019.04.001}, - urldate = {2020-05-21}, - abstract = {Global technological advancement as aligned to the fourth industrial revolution supports various first world development needs. Within the African context, and specifically in developing countries like South Africa (SA), the benefit from technology innovation can significantly impact on socio-economic issues like unemployment and skills development. Technological development is identified as a crucial driver for new growth and a means to develop and outperform global competitors. Human capital, specifically young people, supports inclusive and sustainable economic growth. South Africa as per current classification, remains a twofold economy with among the greatest inequality rates in the world, continuing both disparity and segregation. Employment remains at more than one in three youth unemployed. A group of academics and commercial partners working across disciplines collaborate to create opportunities for local young people to participate in research and data gathering at the University of Johannesburg (UJ). The need for the enablement of technology especially among the youth of the African society has initiated a research question, which determines whether technological instruments can be developed and deployed in Africa to facilitate youth. A transformative but collaborative (researcher and community team), approach is the focus with youth employment as a key objective. Collaboration with local communities to gather household and sector specific data, UJ mobilizes cross-disciplinary research networks to drive social innovation. Joining strategies and technologies to develop appropriate, smart digital tools to support technological enablement for survey data collection in the informal sector in South Africa. The team develop a research methodology and digital tools, which enables geographic information systems (GIS) survey data collection over large geographical areas, at scale, which relies on rigorous data quality controls. Providing various opportunities to local young people in the digital, gig-economy through data collection and digital networking. The major perspective of this paper is to study the aspect of technology and the way it empowers young people on the African continent. The paper presents the design, evolution and results of the digital platform as developed for two major South African Projects.}, - keywords = {Industry 4.0,Mobile technologies,Social impact of technology,Society 4.0,South Africa,Youth} -} - -@article{vanroijenReviewBioplasticsEndoflife2022, - ids = {vanroijen2022a}, - title = {A Review of Bioplastics at End-of-Life: {{Linking}} Experimental Biodegradation Studies and Life Cycle Impact Assessments}, - author = {Van Roijen, Elisabeth C. and Miller, Sabbie A.}, - year = {2022}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {181}, - pages = {106236}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106236}, - urldate = {2022-03-14}, - file = {/Users/fabio/Zotero/storage/U9VCKVXV/Van Roijen y Miller - 2022 - A review of bioplastics at end-of-life Linking ex.pdf} -} - -@article{VanStijn2021, - title = {A {{Circular Economy Life Cycle Assessment}} ({{CE-LCA}}) Model for Building Components}, - author = {{van Stijn}, A. and Malabi Eberhardt, L.C. and Wouterszoon Jansen, B. and Meijer, A.}, - year = {2021}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {174}, - pages = {105683}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105683}, - urldate = {2021-08-24}, - file = {/Users/fabio/Zotero/storage/MC28I68S/full-text.pdf} -} - -@article{VanVeen2019, - title = {Compensating for Perceptual Filters in Weak Signal Assessments}, - author = {{van Veen}, Barbara L. and Roland Ortt, J. and {Badke-Schaub}, P. G.}, - year = {2019}, - journal = {Futures}, - volume = {108}, - number = {January}, - pages = {1--11}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.02.018}, - abstract = {The effect of ambiguous and non-salient information on the managerial interpretive process is rarely investigated, although this information is considered to be the basis for strategic decision-making and requires a different process due to its ill-defined nature. This paper explores the process that outperforming managers used to detect and interpret weak signals. Interviews with 13 top-managers were analyzed using a grounded theory approach to allow the process to emerge. The findings confirmed earlier conclusions on perceptual filters that reduce the number and type of signals assessed. Contrary to earlier findings, the process was significantly altered to compensate for this loss in two ways. First, managers deliberately postponed their assessment of a weak signal by discussing it with people with distinct and second, some managers deliberately searched for signals that were unfamiliar and not fitting their mental model. The sample consisted of outperforming top managers, which raised questions about the generalizability of the findings in specific directions: are the alterations in the weak signal process exemplary for outperformers only, and how does its success compare to formal foresight methods. Finally, the findings have managerial relevance since they indicate how to detect and bring weak signals into the company before impact.}, - keywords = {Emerging change,Perception,Perceptual filter,Top manager,Weak signal}, - file = {/Users/fabio/Zotero/storage/KT5N4T42/Compensating for perceptual filters in weak signal assessments.pdf} -} - -@article{vargaLessonsBiosphereAnthroposphere2023, - title = {Lessons from the Biosphere for the Anthroposphere: {{Analysis}} of Recycling Structures of Conservational Measures}, - shorttitle = {Lessons from the Biosphere for the Anthroposphere}, - author = {Varga, M. and Csukas, B. and Khanal, S. and Bakshi, B. R.}, - year = {2023}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {192}, - pages = {106919}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.106919}, - urldate = {2023-02-13}, - abstract = {This paper analyzes cyclic and transferring maximal pathways in some natural and human-built process structures to show how the essential features of recycling based conservation are embedded in natural systems, and how these lessons can be implemented in human-built systems, consciously. Having studied an example biosystem and ecosystem, it was found that i) local open transferring routes result in cycles at the system level; ii) the diversified species are built from a restricted pool of fundamental components; iii) assembly and disassembly are coordinated by symmetrical structural patterns; iv) recycling is supported by storage, resulting in average composition. Conscious applications of these features are discussed for the carbon emission-free hydrogen energy cycle; for a published case study on grocery bag recycling and for possible assembly-disassembly logistics of electronic waste reprocessing. The household waste-related example also illustrates how process net structure can be applied for the generation of the respective dynamic model.}, - langid = {english}, - keywords = {Assembly and disassembly,Circularity,Conservational measures,Maximal pathways,Process net structure,Recycling}, - file = {/Users/fabio/Zotero/storage/6FX6QKL3/Varga et al_2023_Lessons from the biosphere for the anthroposphere.pdf;/Users/fabio/Zotero/storage/4U2YJ9TM/S0921344923000563.html} -} - -@article{Vargas2019, - title = {Implications of Vertical Policy Integration for Sustainable Development Implementation in Higher Education Institutions}, - author = {Vargas, Valeria Ruiz and Lawthom, Rebecca and Prowse, Alicia and Randles, S. and Tzoulas, Konstantinos}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {733--740}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.07.022}, - urldate = {2020-05-21}, - abstract = {The United Nations together with various national and local actors have acknowledged the importance of sustainable development. However, sustainable development implementation is not straightforward and requires contribution by different actors. Universities have a role in influencing and contributing towards sustainable development. Also, some universities have committed to support sustainable development implementation. One of the instruments to implement sustainable development are policy frameworks, which exist at international, national and institutional level. Vertical policy integration is crucial to support effective implementation of sustainable development. Analysing vertical policy integration could provide information to help improve sustainable development implementation. Therefore, the aim of this paper is to improve understanding of sustainable development implementation in higher education by undertaking a multilevel (international, nationally, organisational) analysis of policy frameworks. Results suggested that policy frameworks include policy issues such as collaboration, partnership, education, outreach, teaching and learning, staff development, curriculum review, research, campus operations and policy that can support sustainable development implementation. However, these policy issues are not consistently integrated at all levels of policy frameworks. Achieving consistency could enhance sustainable development implementation in higher education institutions.}, - keywords = {Campus operations,Curriculum review,Education for sustainable development,Outreach,Research,Staff development}, - file = {/Users/fabio/Zotero/storage/2BSHGVXG/full-text.pdf} -} - -@article{vargasClimateresilientRegenerativeFutures2022, - title = {Climate-Resilient and Regenerative Futures for {{Latin America}} and the {{Caribbean}}}, - author = {Vargas, Camila and {Gomez-Valencia}, Manuela and {Gonzalez-Perez}, Maria Alejandra and Cordova, Miguel and Calixto Casnici, Cyntia Vilasboas and {Monje-Cueto}, Fabiola and {Nava-Aguirre}, Karla Maria and {Minto-Coy}, Indianna and Coronado, Freddy}, - year = {2022}, - month = sep, - journal = {Futures}, - volume = {142}, - pages = {103014}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2022.103014}, - urldate = {2022-08-10}, - abstract = {Few events have had an impact as the global crisis caused by COVID-19. However, prior to the pandemic, Latin American and Caribbean (LAC) countries already had severe problems in terms of inequality, environmental degradation, and dysfunctional political systems. Added to this are the growing challenges that climate change poses for this highly vulnerable region. This historic turning point represents a new call to consider future studies to re-imagine and reinvent alternative futures for the LAC region. For this paper, we conducted an in-depth qualitative futures study to identify how Latin American and Caribbean countries could build long-term resilience, focusing on adaptability to climate change risks, considering existing sustainable development challenges and the detrimental effects of the COVID-19 pandemic on the economic, environmental, and social aspects. This study's findings provide recommendations for policymakers and decision-makers to achieve sustainable futures for LAC. Finally, it reflects on the value of collective action for a future-proof region.}, - langid = {english}, - keywords = {backcasting,Bolivia,Brazil,Chile,climate change,Colombia,COVID-19,future-positive,future-proof business,futures,incentives,Jamaica,Latin America and the Caribbean,Mexico,multi-actor,nature-positive,Peru,regeneration,regenerative future,scenarios planning,SDG 13,SDGs,Sustainable development}, - file = {/Users/fabio/Zotero/storage/TIR8MKPJ/Vargas et al_2022_Climate-resilient and regenerative futures for Latin America and the Caribbean.pdf;/Users/fabio/Zotero/storage/VM9HHCQ7/S0016328722001148.html} -} - -@article{Varma2016, - title = {Future of {{Manufacturing Technology Rapid Prototyping Technique}}}, - author = {Varma, Yembadi Koushik and Madhukar, Samatham and Akhil, Bootla and Kumar, Pokala Saiprasanna}, - year = {2016}, - journal = {International Journal of Mechanical Engineering and Technology}, - volume = {7}, - number = {5}, - pages = {117--126}, - issn = {09766359}, - keywords = {117,126,2016,5,7,bootla akhil and pokala,cite this article,computer aided design,engineering and technology,future of manufacturing technology,international journal of mechanical,pp,product design,rapid prototyping,rapid prototyping technique,saiprasanna kumar,samatham madhukar,yembadi koushik varma}, - file = {/Users/fabio/Zotero/storage/GXKJTCM4/Future of manufacturing technology rapid prototyping technique.pdf} -} - -@article{Varotto2017, - title = {Psychological Strategies to Promote Household Recycling. {{A}} Systematic Review with Meta-Analysis of Validated Field Interventions}, - author = {Varotto, Alessandra and Spagnolli, Anna}, - year = {2017}, - journal = {Journal of Environmental Psychology}, - volume = {51}, - pages = {168--188}, - publisher = {{Elsevier Ltd}}, - issn = {15229610}, - doi = {10.1016/j.jenvp.2017.03.011}, - abstract = {Recycling urban waste is a priority to preserve natural resources and reduce pollution. However, the entire recycling process is not possible without the cooperation of citizens through primary separation of waste at home. Various psychological intervention strategies have been applied to promote household recycling, such as information, feedback, incentives, commitment, behavior modeling and environmental alterations. The purpose of this article is to systematically review and evaluate through a meta-analysis their effectiveness, investigating also existing connections between intervention-based research and research on recycling determinants. A random-effect meta-analysis with a sample of 36 studies reporting 70 interventions revealed that social modeling and environmental alterations were the most effective techniques. The examination of underlying factors considered in the interventions also showed that some of them are rarely accounted for when designing the interventions. The findings are discussed along with possible future directions for interventions aiming at promoting recycling.}, - isbn = {0272-4944}, - keywords = {Household recycling,Interventions,meta-analysis}, - file = {/Users/fabio/Zotero/storage/JUV85V4W/Psychological strategies to promote household recycling. A systematic review with meta-analysis of validated field interventions.pdf} -} - -@article{vasanthaReviewProductService2012, - title = {A Review of Product\textendash Service Systems Design Methodologies}, - author = {Vasantha, Gokula Vijaykumar Annamalai and Roy, Rajkumar and Lelah, Alan and Brissaud, Daniel}, - year = {2012}, - month = sep, - journal = {Journal of Engineering Design}, - volume = {23}, - number = {9}, - pages = {635--659}, - publisher = {{Taylor \& Francis}}, - issn = {0954-4828}, - doi = {10.1080/09544828.2011.639712}, - urldate = {2023-07-21}, - abstract = {Product\textendash service systems (PSS), motivated to fulfil customers' needs, are seen as good strategies to face today's competitive business environment. The field of PSS research is however not fully mature and many different methodologies are proposed for the PSS design. This paper seeks to understand the directions taken in eight state-of-the-art methodologies so as to identify common needs in future research. The methodologies are studied across their authors' views and definitions of services, PSS and their objectives and challenges, along with the tools that have been developed. A maturity model is built to access the current PSS design across 20 dimensions. The model highlights that only three dimensions are strongly treated: design processes for integrating products and services, definitions of new terminologies and considerations concerning planning and designing life-cycle phases. To enhance the industrial application, collaboration between researchers and practitioners can be spurred through two challenges: common ontology and models for representation of PSS. Particular attention must also be placed on sustainability as current models do not support the generation of sustainable PSS. As a whole, the review shows that the PSS design is still in initial stages of development and substantial research is required to develop a practical PSS design methodology.}, - keywords = {design methodologies,ontology,product\textendash service systems,survey,sustainability}, - file = {/Users/fabio/Zotero/storage/GXH3LB5A/Vasantha et al. - 2012 - A review of product–service systems design methodo.pdf} -} - -@article{vassilakosFabricationPartsHeterogeneous2021, - title = {Fabrication of Parts with Heterogeneous Structure Using Material Extrusion Additive Manufacturing}, - author = {Vassilakos, Aggelos and Giannatsis, John and Dedoussis, Vassilis}, - year = {2021}, - month = may, - journal = {Virtual and Physical Prototyping}, - pages = {1--24}, - publisher = {{Taylor \& Francis}}, - issn = {1745-2759}, - doi = {10.1080/17452759.2021.1919154}, - urldate = {2021-06-08}, - abstract = {Additive manufacturing technologies (AM) have a unique capacity for handling geometrical complexity and are, therefore, ideal for producing parts with geometrically complex form and structure. In t...}, - keywords = {3D printing,fused filament fabrication,heterogeneous structure,material extrusion,path planning,voxel modelling} -} - -@article{vaucherRecyclingBottleGrade2022, - title = {Recycling of {{Bottle Grade PET}}: {{Influence}} of {{HDPE Contamination}} on the {{Microstructure}} and {{Mechanical Performance}} of {{3D Printed Parts}}}, - shorttitle = {Recycling of {{Bottle Grade PET}}}, - author = {Vaucher, Joanne and Demongeot, Adrien and Michaud, V{\'e}ronique and Leterrier, Yves}, - year = {2022}, - month = jan, - journal = {Polymers}, - volume = {14}, - number = {24}, - pages = {5507}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2073-4360}, - doi = {10.3390/polym14245507}, - urldate = {2023-03-20}, - abstract = {As part of a project that aims to provide people with disabilities with simple assistive devices in Colombia, the possibility of creating a PET filament that can be printed by Fused Deposition Modelling (FDM) from beverage bottle waste was investigated, with the aim to remain as simple as possible in terms of plastic collection, sorting, processing, and printing. Recycled PET filaments were thus produced by extrusion from collected PET bottles, with the potential addition of HDPE, which comes from caps and rings. The microstructure, mechanical performance, and printing quality of parts produced with these filaments were investigated in comparison to commercial PET virgin and recycled filaments. HDPE presence as an immiscible blend did not affect the ease of extrusion or the quality of the printing, which were all satisfactory. In some conditions, the addition of 5 wt\% of HDPE to recycled PET had a toughening effect on otherwise brittle samples. This behavior was attributed to the presence of elongated HDPE inclusions resulting from shear forces induced by the layer-by-layer printing, provided that the interface temperature remained high between layer depositions. This confirms that the mechanical performance of recycled PET is very sensitive to the processing conditions, especially in the case of 3D printing. Nonetheless, this low-cost process that did not require sophisticated compatibilization schemes allowed for the printing of parts with mechanical properties comparable to those obtained with high purity, commercially recycled filaments, opening interesting perspectives for a low-cost PET recycling process.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {3D printing,contamination,high density polyethylene,poly(ethylene terephthalate),recycling}, - file = {/Users/fabio/Zotero/storage/4Y8FSQBK/Vaucher et al_2022_Recycling of Bottle Grade PET.pdf} -} - -@article{Vayre2012, - title = {Designing for {{Additive Manufacturing}}}, - author = {Vayre, B. and Vignat, F. and Villeneuve, F.}, - year = {2012}, - month = jan, - journal = {Procedia CIRP}, - volume = {3}, - pages = {632--637}, - issn = {22128271}, - doi = {10.1016/j.procir.2012.07.108}, - urldate = {2013-03-04}, - keywords = {additive manufacturing,designing methodology,designing process,direct manufacturing,rapid manufacturing}, - file = {/Users/fabio/Zotero/storage/CDVEVZ95/Designing for Additive Manufacturing.pdf} -} - -@article{vazJourneyMonitoringEcosystem2021, - title = {The Journey to Monitoring Ecosystem Services: {{Are}} We There Yet?}, - author = {Vaz, Ana Sofia and Selomane, Odirilwe and Jones, Laurence and Gosal, Arjan S. and Ziv, Guy and {Muller-Karger}, Frank Edgar and Montes, Enrique and Vallejos, Maria}, - year = {2021}, - month = jun, - journal = {Ecosystem Services}, - pages = {101313}, - publisher = {{Elsevier}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101313}, - urldate = {2021-06-11} -} - -@article{Veeckman, - title = {A {{Playground}} for the {{Innovative Development}} Of}, - author = {Veeckman, Carina and Graaf, Shenja Van Der}, - isbn = {9781479947355}, - keywords = {and to eventually,citizen engagement,developement,dynamics,governments to better understand,information about the city,living lab,mobile application,public government data,smart city,their city,these data can help} -} - -@article{Veeckman2013c, - title = {Linking {{Living Lab Characteristics}} and {{Their Outcomes}}: {{Towards}} a {{Conceptual Framework}}}, - author = {Veeckman, Carina and Schuurman, Dimitri and Leminen, Seppo and Westerlund, Mika}, - year = {2013}, - journal = {Technology Innovation Management Review}, - volume = {3}, - number = {2}, - pages = {6--15}, - issn = {1927-0321}, - doi = {10.13140/2.1.3147.1047}, - abstract = {Despite almost a decade of living lab activity all over Europe, there still is a lack of empirical research into the practical implementation and the related outcomes of living labs. Therefore, this article proposes a framework to create a better understanding of the characteristics and outcomes of living labs. We investigate three living labs in Belgium and one in Finland to learn how the different building blocks of living lab environments contribute to the outputs of innovation projects launched within the lab. The findings imply that managers and researchers contemplating innovation in living labs need to consider the intended inputs and outcomes, and reframe their innovation activities accordingly. We formulate practical guidelines on how living labs should be managed on the levels of community interaction, stakeholder engagement, and methodological setup to succeed in implementing living lab projects and to create user-centred innovations. That way, living lab practitioners can work towards a more sustainable way of setting up living labs that can run innovation projects over a longer period of time.}, - keywords = {co-creation,innovation ecosystem,Living lab,Open innovation,user involvement} -} - -@inproceedings{Veeckman2014a, - title = {The City as Living Labortory: {{A}} Playground for the Innovative Development of Smart City Applications}, - booktitle = {2014 {{International Conference}} on {{Engineering}}, {{Technology}} and {{Innovation}} ({{ICE}})}, - author = {Veeckman, Carina and {van der Graaf}, Shenja}, - year = {2014}, - pages = {1--10}, - publisher = {{IEEE}}, - address = {{Bergamo}}, - doi = {10.1109/ICE.2014.6871621}, - abstract = {Nowadays the smart-city concept is shifting from a top- down, mere technological approach towards bottom-up processes that are based on the participation of creative citizens, research organisations and companies. Here, the city acts as an urban innovation ecosystem in which smart applications, open government data and new modes of participation are fostering innovation in the city. However, detailed analyses on how to manage smart city initiatives as well as descriptions of underlying challenges and barriers seem still scarce. Therefore, this paper investigates four, collaborative smart city initiatives in Europe to learn how cities can optimize the citizen's involvement in the context of open innovation. The analytical framework focuses on the innovation ecosystem and the civic capacities to engage in the public domain. Findings show that public service delivery can be co-designed between the city and citizens, if different toolkits aligned with the specific capacities and skills of the users are provided. By providing the right tools, even ordinary citizens can take a much more active role in the evolution of their cities and generate solutions from which both the city and everyday urban life can possibly benefit.}, - isbn = {978-1-4799-4735-5}, - keywords = {Citizen engagement,Developement,Living Lab,Mobile Application,Public Government Data,Smart City} -} - -@article{Veer2017, - title = {The Strength and Ductility of Glass Fibre Reinforced {{3D-printed}} Polypropylene}, - author = {Veer, F. A. and Setaki, F. and Riemslag, A. C. and Sakkas, P.}, - year = {2017}, - journal = {Heron}, - volume = {62}, - number = {2}, - pages = {85--97}, - issn = {15744078}, - abstract = {The possibility of using a mix of recycled polypropylene (PP) with new glass fibre reinforced polypropylene as a materials source for 3D printed engineering components is investigated. The strength and elongation to fracture are determined for various grades of material and in relation to the print direction. The measured values are compared with literature values for these materials in an as new condition. It is shown that the use of recycled PP degrades the material properties. PP recycled from house hold waste has significantly worse properties than PP recycled from industrial waste. The technical possibilities for 3D printed engineering components based on this reused waste material are discussed.}, - keywords = {3D printing,Polypropylene,Recycling,Strength}, - file = {/Users/fabio/Zotero/storage/U82VNCXQ/The strength and ductility of glass fibre reinforced 3D-printed polypropylene.pdf} -} - -@article{vegterSupplyChainsCircular2020, - title = {Supply Chains in Circular Business Models: Processes and Performance Objectives}, - author = {Vegter, Dennis and {van Hillegersberg}, Jos and Olthaar, Matthias}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105046}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105046}, - urldate = {2020-07-14} -} - -@article{veisiAlignmentStakeholderScientist2022, - title = {Alignment of Stakeholder and Scientist Understandings and Expectations in a Participatory Modeling Project}, - author = {Veisi, Hadi and {Jackson-Smith}, Douglas and Arrueta, Lourdes}, - year = {2022}, - month = aug, - journal = {Environmental Science \& Policy}, - volume = {134}, - pages = {57--66}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.04.004}, - urldate = {2022-05-23} -} - -@inproceedings{Velasquez2017, - title = {A Low-Cost {{IoT}} Based Environmental Monitoring System. {{A}} Citizen Approach to Pollution Awareness}, - booktitle = {2017 Chil. {{Conf}}. {{Electr}}. {{Electron}}. {{Eng}}. {{Inf}}. {{Commun}}. {{Technol}}.}, - author = {Velasquez, Pablo and Vasquez, Lorenzo and Correa, Christian and Rivera, Diego}, - year = {2017}, - month = oct, - pages = {1--6}, - publisher = {{IEEE}}, - doi = {10.1109/CHILECON.2017.8229599}, - isbn = {978-1-5386-3123-2} -} - -@article{veldhuizenConceptualisingFoundationsSustainability2020, - title = {Conceptualising the Foundations of Sustainability Focused Innovation Policy: {{From}} Constructivism to Holism}, - author = {Veldhuizen, Caroline}, - year = {2020}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120374}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120374}, - urldate = {2020-10-28}, - abstract = {The emergence of complex global problems and related concerns about `sustainability' are central pre-occupations of discourses concerning innovation and its pursuit. The pressing need to gain fresh insights into the nature of new ideas and collaborative endeavour that can be used to drive societal transitions, is increasingly acknowledged. The objective of this paper is to contribute to these insights by examining and enriching the conceptual foundations of sustainability focused innovation policy. It's comparative metatheoretical approach enables exploration of the epistemological and political dimensions of the geography of transitions and systems literatures and the implications for the way in which they inform transformational change. The potential for deeper engagement with systems theory to create more holistic representations of complex problems, and the issues which must be addressed to resolve them, is explored. Findings regarding theory development and its implications for sustainability focused policy making provide a vital contribution to the fields of economic geography and the geography of transitions as well as to transitions literature more generally. As such it augments the foundations of ongoing empirical study and discourses which address the diminishing returns associated with current growth trajectories.}, - file = {/Users/fabio/Zotero/storage/T2K6V8WH/full-text.pdf} -} - -@article{velenturfPrinciplesSustainableCircular2021, - title = {Principles for a Sustainable Circular Economy}, - author = {Velenturf, Anne P.M. and Purnell, Phil}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {1437--1457}, - publisher = {{Elsevier B.V.}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.02.018}, - urldate = {2021-04-21}, - abstract = {The pressure that the human species exerts on the natural environment through the extraction of materials and generation of wastes is widely recognised. Circular economy has emerged as a potential solution to make better use of resources. Positioned as a technology-focused concept that can generate economic gains while alleviating pressure on the environment, circular economy enjoys a positive reception by organisations in public, private and civic sectors and, increasingly, academia alike. However, concerns have been raised regarding some purported circular economy practices being promoted as `sustainable' yet resulting in detrimental impacts on environment and society. We briefly revisit the systems ecology literature that construed the context for both circular economy and sustainable development. Values and principles in core sustainable development literature are analysed to offer a foundation against which circular economy can be discussed. We then analyse and critically reflect upon the strengths, shortcomings and theoretical flaws within the values and principles that emerged from the evolving circular economy literature. We propose a value framework and set of ten principles for the design, implementation and evaluation of a sustainable circular economy. We finish with a call for action for both practitioners and a research agenda for academia.}, - keywords = {Circular economy,Economic prosperity,Natural capital,Social equity,Sustainable development,Sustainable transition}, - file = {/Users/fabio/Zotero/storage/SE4PZTKJ/full-text.pdf} -} - -@inproceedings{Venkataraman2000, - title = {Mechanical and Rheological Properties of {{Feedstock}} Material for Fused Deposition of Ceramics and Metals ({{FDC}} and {{FDMet}}) and Their Relationship to Process Performance}, - booktitle = {Solid {{Freeform Fabrication Proceedings}}}, - author = {Venkataraman, N and Rangarajan, S and Matthewson, M.J. and Safari, A and Danforth, S.C. and Guceri, S. and Yardimci, A}, - year = {1999}, - month = dec, - volume = {6}, - pages = {351--360}, - publisher = {{University of Texas at Austin}}, - address = {{Austin, Texas}}, - issn = {1355-2546}, - urldate = {2015-02-18}, - file = {/Users/fabio/Zotero/storage/VGJGASPZ/m-api-691bb1a1-6eab-5195-57a1-5e0342c6b0b3.pdf} -} - -@article{Venkataraman2000a, - title = {Feedstock Material Property \textendash{} Process Relationships in Fused Deposition of Ceramics ({{FDC}})}, - author = {Venkataraman, N. and Rangarajan, S. and Matthewson, M.J. and Harper, B. and Safari, A. and Danforth, S.C. and Wu, G. and Langrana, N. and Guceri, S. and Yardimci, A.}, - year = {2000}, - month = dec, - journal = {Rapid Prototyping Journal}, - volume = {6}, - number = {4}, - pages = {244--253}, - issn = {1355-2546}, - doi = {10.1108/13552540010373344}, - urldate = {2015-02-18}, - isbn = {1355254001037}, - file = {/Users/fabio/Zotero/storage/96GTG3FT/Venkataraman et al. - 2000 - Feedstock material property – process relationships in fused deposition of ceramics (FDC).pdf} -} - -@article{Verbeeten2019, - title = {Anisotropic Rate-Dependent Mechanical Behavior of {{Poly}}({{Lactic Acid}}) Processed by {{Material Extrusion Additive Manufacturing}}}, - author = {Verbeeten, Wilco M.H. and {Lorenzo-Ba{\~n}uelos}, Miriam and {Arribas-Subi{\~n}as}, Pablo J.}, - year = {2019}, - month = nov, - journal = {Additive Manufacturing}, - pages = {100968}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.100968} -} - -@article{verbeetenMaterialExtrusionAdditive2022, - title = {Material {{Extrusion Additive Manufacturing}} of {{Poly}}({{Lactic Acid}}): {{Influence}} of Infill Orientation Angle}, - shorttitle = {Material {{Extrusion Additive Manufacturing}} of {{Poly}}({{Lactic Acid}})}, - author = {Verbeeten, Wilco M. H. and {Lorenzo-Ba{\~n}uelos}, Miriam}, - year = {2022}, - month = aug, - journal = {Additive Manufacturing}, - pages = {103079}, - issn = {2214-8604}, - doi = {10.1016/j.addma.2022.103079}, - urldate = {2022-08-16}, - abstract = {The effect that the infill orientation angle has on the strain-rate dependence of the yield stress for material extrusion additive manufactured (ME-AM) PolyLactic Acid (PLA) material was investigated. Symmetric angle-ply stacking sequences were used to produce ME-AM tensile test samples. Measured yield stresses were compensated for the voided structure, typical of ME-AM components. Furthermore, molecular orientation and stretch was macroscopically assessed by a thermal shrinkage procedure. Additionally, hot-press compression molded (CM) samples were manufactured and mechanically characterized in uniaxial tensile and compression in order to determine the material's isotropic bulk properties. Initial model parameters for the Ree-Eyring modification of the Eyring flow rule were determined using CM data. According to SEM fractography, all samples showed microscopically brittle fracture behavior. Notwithstanding, contrary to CM samples, ME-AM specimens showed macroscopically ductile stress\textendash strain behavior and a transition from a regime with only a primary {$\alpha$}-deformation process, at low strain rates, to a regime with 2 deformation processes ({$\alpha$}+{$\beta$}), at high strain rates. These effects are an influence of the processing step and are attributed to the molecular orientation and stretch of the polymer chains, provoking anisotropic mechanical properties. As a consequence, a deformation-induced change of the Eyring rate constants is needed to adequately describe the strain-rate dependence of the ME-AM yield stress behavior, leaving the initial activation volumes unchanged. Taking this deformation-dependence of the rate constants into account, yield stresses as a function of infill orientation angle can be appropriately predicted.}, - langid = {english}, - keywords = {Angle-ply laminate configuration,Anisotropic strain-rate dependent yield stress,PLA,Ree-Eyring rate equation}, - file = {/Users/fabio/Zotero/storage/GIFJS72G/Verbeeten y Lorenzo-Bañuelos - 2022 - Material Extrusion Additive Manufacturing of Poly(.pdf;/Users/fabio/Zotero/storage/QVCKG2KK/S2214860422004699.html} -} - -@article{Verboeket2019, - title = {The Disruptive Impact of Additive Manufacturing on Supply Chains: {{A}} Literature Study, Conceptual Framework and Research Agenda}, - author = {Verboeket, Victor and Krikke, Harold}, - year = {2019}, - month = oct, - journal = {Computers in Industry}, - volume = {111}, - pages = {91--107}, - publisher = {{Elsevier B.V.}}, - issn = {01663615}, - doi = {10.1016/j.compind.2019.07.003}, - keywords = {additive manufacturing}, - file = {/Users/fabio/Zotero/storage/8M4F5RNC/The disruptive impact of additive manufacturing on supply chains A literature study, conceptual framework and research agenda.pdf} -} - -@article{Verma2016, - title = {Toxic {{Pollutants}} from {{Plastic Waste- A Review}}}, - author = {Verma, Rinku and Vinoda, K.S. and Papireddy, M. and Gowda, A.N.S.}, - year = {2016}, - journal = {Procedia Environmental Sciences}, - volume = {35}, - pages = {701--708}, - publisher = {{The Author(s)}}, - issn = {18780296}, - doi = {10.1016/j.proenv.2016.07.069}, - abstract = {Incineration of plastic waste in an open field is a major source of air pollution. Most of the times, the Municipal Solid Waste containing about 12\% of plastics is burnt, releasing toxic gases like Dioxins, Furans, Mercury and Polychlorinated Biphenyls into the atmosphere. Further, burning of Poly Vinyl Chloride liberates hazardous halogens and pollutes air, the impact of which is climate change. The toxic substances thus released are posing a threat to vegetation, human and animal health and environment as a whole. Polystyrene is harmful to Central Nervous System. The hazardous brominated compounds act as carcinogens and mutagens. Dioxins settle on the crops and in our waterways where they eventually enter into our food and hence the body system. These Dioxins are the lethal persistent organic pollutants (POPs) and its worst component, 2,3,7,8 tetrachlorodibenzo-p-dioxin (TCDD), commonly known as agentorange is a toxic compound which causes cancer and neurological damage, disrupts reproductive thyroid and respiratory systems. Thus, burning of plastic wastes increase the risk of heart disease, aggravates respiratory ailments such as asthma and emphysema and cause rashes, nausea or headaches, and damages the nervous system. Hence, a sustainable step towards tomorrow's cleaner and healthier environment needs immediate attention of the environmentalists and scientists. This review presents the hazards of incineration; open burning of plastics and effects of plastic in water and also a possibility of working out strategies to develop alternate procedures of plastic waste management.}, - keywords = {health,plastic,pollutant,pyrolysis,toxicology}, - file = {/Users/fabio/Zotero/storage/WNVB6J5M/Toxic Pollutants from Plastic Waste- A Review.pdf} -} - -@article{Verma2017, - title = {Sustainability-Induced Dual-Level Optimization of Additive Manufacturing Process}, - author = {Verma, Anoop and Rai, Rahul}, - year = {2017}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {88}, - number = {5-8}, - pages = {1945--1959}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {14333015}, - doi = {10.1007/s00170-016-8905-9}, - abstract = {Additive manufacturing (AM) is considered as the standalone production house for customized parts of different varieties. AM has found applications in various industries including medical and aerospace for both pro-totyping and functional part fabrication. With rapid devel-opment in additive manufacturing technologies, the future of US manufacturing and economy clearly looks bright, process sustainability of such AM devices are not well studied. This paper addresses much needed sustainability aspects of additive manufacturing processes. More specif-ically, material wastage and energy consumption are two major concerns of the AM processes that requires imme-diate attention. In this research, process both at layer and part level enabling additive manufacturing process towards sustainability is formulated and optimized. Numerous real world examples are demonstrated and compared against conventional approaches to demonstrate the applicability of the developed approach. The models formulated here for selective laser sintering (SLS) process can be easily extended to other additive manufacturing technologies with little or no modification. Limitations of proposed research are also discussed.}, - isbn = {0017001689059}, - keywords = {Additive manufacturing,Selective laser sintering,Sustainability} -} - -@article{vermaIdentifyingPrioritizingImpediments2022, - title = {Identifying and Prioritizing Impediments of Industry 4.0 to Sustainable Digital Manufacturing: {{A}} Mixed Method Approach}, - author = {Verma, Pratima and Kumar, Vimal and Daim, Tugrul and Sharma, Nagendra Kumar and Mittal, Ankesh}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - pages = {131639}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131639}, - urldate = {2022-04-25} -} - -@article{Vermunt2019, - title = {Exploring Barriers to Implementing Different Circular Business Models}, - author = {Vermunt, D.A. and Negro, S.O. and Verweij, P.A. and Kuppens, D.V. and Hekkert, M.P.}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {222}, - pages = {891--902}, - publisher = {{Elsevier Ltd}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2019.03.052}, - abstract = {Even though much attention has been given to barriers related to implementing circular business models, so far, no studies have focused on how the barriers differ between business models. Ignoring the possibility of such differences could lead to unjustified generalizations about the barriers to implementing circular business models (CBMs). We identified barriers to implementation and compared them for different CBMs by analyzing 43 case studies of CBMs, based on in-depth interviews with 31 Dutch firms. Barriers were analyzed for the following CBMs: circular supplies, resource recovery, product life extension, and the product-as-a-service model. The barriers identified were classified into two broad categories: internal problems related to the firm itself and external barriers related to the firm's environment. This study shows that key challenges were related to the firm's external environment, and that the barriers differed between the four business models studied. Whereas most internal barriers encountered by the product-as-a-service model were to do with organization (for instance, of lease models), the other models reported these barriers less frequently. External supply chain issues were challenging in the resource recovery, product life extension, and circular supplies models, mainly because of great dependence on third parties for the input of discarded products and waste materials. We investigated the strategies firms used to overcome these barriers. From our findings we conclude that to stimulate the development of circular businesses, firms and policy makers should focus on bespoke solutions and strategies for different types of CBMs.}, - keywords = {circular business model,implementation barriers,supply chain barriers}, - file = {/Users/fabio/Zotero/storage/KPMKFCMT/Exploring barriers to implementing different circular business models.pdf} -} - -@inproceedings{vernerDigitalDesign3D2015, - title = {Digital Design and {{3D}} Printing in Technology Teacher Education}, - booktitle = {Procedia {{CIRP}}}, - author = {Verner, Igor and Merksamer, Amir}, - year = {2015}, - volume = {36}, - pages = {182--186}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2015.08.041}, - urldate = {2021-06-07}, - abstract = {This paper reports changes in the Technion technology/mechanics teacher education courses aimed to enhance students' knowledge and skills in teaching digital design and manufacturing. The two major changes are: (1) equipping the departmental laboratory of technology with modern computer aided design software tools (Creo, Mathcad) and 3D printer, and (2) upgrading the courses to meet the conceive-design-implement-operate (CDIO) approach. Our ongoing study indicates that the CDIO approach can be applied to balance learning pedagogical fundamentals, training technological skills, and teaching practice. The study provides indications that learning activities in the courses facilitate development of visual literacy skills.}, - keywords = {3D printing,CDIO approach,Digital design,technology teacher education}, - file = {/Users/fabio/Zotero/storage/VWUPJ4D9/full-text.pdf} -} - -@article{verplankenAttitudesHabitsBehavior2022, - title = {Attitudes, {{Habits}}, and {{Behavior Change}}}, - author = {Verplanken, Bas and Orbell, Sheina}, - year = {2022}, - month = jan, - journal = {https://doi.org/10.1146/annurev-psych-020821-011744}, - volume = {73}, - number = {1}, - pages = {327--352}, - publisher = {{Annual Reviews}}, - issn = {0066-4308}, - doi = {10.1146/ANNUREV-PSYCH-020821-011744}, - urldate = {2022-01-25}, - abstract = {Efforts to guide peoples' behavior toward environmental sustainability, good health, or new products have emphasized informational and attitude change strategies. There is evidence that changing at...}, - keywords = {attitude\textendash behavior relation,automatic processes,habit architecture,habit discontinuity,habit formation,self-regulation} -} - -@article{verschoorExploringRelationshipsClimate2020, - title = {Exploring Relationships between Climate Change Beliefs and Energy Preferences: {{A}} Network Analysis of the {{European Social Survey}}}, - author = {Verschoor, Mark and Albers, Casper and Poortinga, Wouter and B{\"o}hm, Gisela and Steg, Linda}, - year = {2020}, - month = may, - journal = {Journal of Environmental Psychology}, - pages = {101435}, - publisher = {{Academic Press}}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2020.101435}, - urldate = {2020-05-27} -} - -@article{vetterMatrixConvivialTechnology2018, - title = {The {{Matrix}} of {{Convivial Technology}} \textendash{} {{Assessing}} Technologies for Degrowth}, - author = {Vetter, Andrea}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - series = {Technology and {{Degrowth}}}, - volume = {197}, - pages = {1778--1786}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2017.02.195}, - urldate = {2022-10-10}, - abstract = {This article introduces the notion of convivial technology as a conceptual framework for technologies suitable for degrowth societies. This paper is inspired by Ivan Illich's notion of convivial tools but reconsiders it in the light of current practices and discussions. Looking for a definition of convivial technologies it uses qualitative empirical research conducted with degrowth-oriented groups developing or adapting grassroots technologies like Open Source cargo bikes or composting toilets in Germany. The basic ethical values and design criteria that guide these different groups in relation to technology are summed up into five dimensions: relatedness, adaptability, accessibility, bio-interaction and appropriateness. These dimensions can be correlated with the four life-cycle levels material, production, use and infrastructure to form the Matrix for Convivial Technology (MCT). The MCT is a 20-field schema that can be filled in. Experiences with the tool in different fields are presented. The MCT is itself a convivial tool as it allows for degrowth-oriented groups to self-assess their work and products in a qualitative, context-sensitive and independent way. It is a normative schema that fosters discussion concerning degrowth technologies in contexts of political education. And it is a research method as it helps collecting data about underlying ethical assumptions and aspirations of individuals and groups engaged in developing technology.}, - langid = {english}, - keywords = {Conviviality,Degrowth,Ethics of technology,Ethnography,Ivan Illich,Open Source}, - file = {/Users/fabio/Zotero/storage/K76HFB27/Vetter_2018_The Matrix of Convivial Technology – Assessing technologies for degrowth.pdf;/Users/fabio/Zotero/storage/9P6ML5IC/S0959652617304213.html} -} - -@article{veyssiereTerritorialDevelopmentProcess2022, - title = {Territorial Development Process Based on the Circular Economy: A Systematic Literature Review}, - shorttitle = {Territorial Development Process Based on the Circular Economy}, - author = {Veyssi{\`e}re, Sonia and Laperche, Blandine and Blanquart, Corinne}, - year = {2022}, - month = jul, - journal = {European Planning Studies}, - volume = {30}, - number = {7}, - pages = {1192--1211}, - publisher = {{Routledge}}, - issn = {0965-4313}, - doi = {10.1080/09654313.2021.1873917}, - urldate = {2022-10-16}, - abstract = {Our purpose is to examine the link between circular economy (CE) and territorial development in the literature. Works on CE most often deal with its integration within firms' strategies. The link between CE and the territorial development process (TDP) is more rarely studied. We define the TDP through the interaction between three key dimensions: coordination modalities between the stakeholders, institutional factors, and the resources generated in the process. Using a systematic literature review our aim is to understand, through the occurrences of those dimensions in the 265 papers selected, whether or not and how the issue of the TDP is addressed. Our first result is that a part of the literature on CE often focuses on one or two of the three key dimensions identified. The second result is to highlight several forms of interactions between the key dimensions, illustrating that CE can imply different types of TDPs.}, - keywords = {Circular economy,coordination,institutional factors,resources,territorial development}, - file = {/Users/fabio/Zotero/storage/HARHRDQP/Veyssière et al_2022_Territorial development process based on the circular economy.pdf} -} - -@book{vezzoliDesigningSustainableEnergy2018, - title = {Designing {{Sustainable Energy}} for {{All}}}, - author = {Vezzoli, Carlo and Ceschin, Fabrizio and Osanjo, Lilac and M'Rithaa, Mugendi K. and Moalosi, Richie and Nakazibwe, Venny and Diehl, Jan Carel}, - year = {2018}, - series = {Green {{Energy}} and {{Technology}}}, - publisher = {{Springer International Publishing}}, - address = {{Cham}}, - doi = {10.1007/978-3-319-70223-0}, - urldate = {2023-09-06}, - isbn = {978-3-319-70222-3 978-3-319-70223-0}, - file = {/Users/fabio/Zotero/storage/TNMCFYN4/Vezzoli et al_2018_Designing Sustainable Energy for All.pdf} -} - -@article{Vicente-Saez2020a, - ids = {Vicente-Saez2020}, - title = {The Dawn of an Open Exploration Era: {{Emergent}} Principles and Practices of Open Science and Innovation of University Research Teams in a Digital World}, - author = {{Vicente-Saez}, Ruben and Gustafsson, Robin and {Van den Brande}, Lieve}, - year = {2020}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {156}, - pages = {120037}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120037}, - urldate = {2020-05-08}, - abstract = {Principles and practices of open science at universities are evolving. Increasing use and application of digital technologies and platforms in research and innovation are pushing universities to take up and develop new visions and principles for how research and innovation are performed. These open science policies and practices (i.e. open data sharing, open access publishing, open repositories, open physical labs, participatory design, and transdisciplinary research platforms) are expanding the ethos of science and innovation at universities. These new principles and practices of open science at universities are also triggering novel open innovation practices by university research teams. Open science and innovation practices hold great potential for accelerating the learning and creation of new knowledge, speeding up the research and innovation process for finding solutions for grand societal challenges, and nurturing the growth of highly innovative and entrepreneurial people. The purpose of this study was to identify emergent principles, practices, and underlying mechanisms of open science and innovation developed and encountered by research teams at universities. The results of this study provide directions for how to advance openness in science at universities and illustrate how openness in innovation is being remodelled by open science practices. Based on our findings, we propose an open exploration policy and a governance model of open science and innovation at universities in the digital world, which aspire to create increased societal value.}, - keywords = {Governance of research and innovation,Open exploration,Open innovation,Open innovation policy,Open science,Openness,Research teams,Universities}, - file = {/Users/fabio/Zotero/storage/XJR4QIL2/full-text.pdf} -} - -@article{Vicentini2009, - title = {Sensorized Waste Collection Container for Content Estimation and Collection Optimization}, - author = {Vicentini, F. and Giusti, A. and Rovetta, A. and Fan, X. and He, Q. and Zhu, M. and Liu, B.}, - year = {2009}, - month = may, - journal = {Waste Management}, - volume = {29}, - number = {5}, - pages = {1467--1472}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2008.10.017}, - urldate = {2021-09-23}, - abstract = {The concurrent effects of a fast national growth rate, of a large and dense residential area and a pressing demand for urban environmental protection create a challenging framework for waste management in Pudong New Area, Shanghai. The complexity of context and procedures is indeed a primary concern of local municipal authorities due to problems related to the collection, transportation and processing of residential solid waste. In order to design and implement a suitable urban solid waste system, the first task is to forecast the quantity and variance of solid waste as it relates to residential population, consumer index, season, etc. The system here discussed addresses exactly these issues, by means of an intelligent, sensorized container. The container has been prepared and tested in the Pudong New Area, Shanghai. \textcopyright{} 2008 Elsevier Ltd. All rights reserved.}, - pmid = {19103480} -} - -@article{Vidakis2020, - ids = {Vidakis2020a}, - title = {Sustainable Additive Manufacturing: {{Mechanical}} Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes}, - author = {Vidakis, Nectarios and Petousis, Markos and Maniadi, Athena and Koudoumas, Emmanuel and Vairis, Achilles and Kechagias, John}, - year = {2020}, - journal = {Sustainability (Switzerland)}, - volume = {12}, - number = {9}, - issn = {20711050}, - doi = {10.3390/SU12093568}, - abstract = {Sustainability in additive manufacturing refers mainly to the recycling rate of polymers and composites used in fused filament fabrication (FFF), which nowadays are rapidly increasing in volume and value. Recycling of such materials is mostly a thermomechanical process that modifies their overall mechanical behavior. The present research work focuses on the acrylonitrile-butadiene-styrene (ABS) polymer, which is the second most popular material used in FFF-3D printing. In order to investigate the effect of the recycling courses on the mechanical response of the ABS polymer, an experimental simulation of the recycling process that isolates the thermomechanical treatment from other parameters (i.e., contamination, ageing, etc.) has been performed. To quantify the effect of repeated recycling processes on the mechanic response of the ABS polymer, a wide variety of mechanical tests were conducted on FFF-printed specimens. Regarding this, standard tensile, compression, flexion, impact and micro-hardness tests were performed per recycle repetition. The findings prove that the mechanical response of the recycled ABS polymer is generally improved over the recycling repetitions for a certain number of repetitions. An optimum overall mechanical behavior is found between the third and the fifth repetition, indicating a significant positive impact of the ABS polymer recycling, besides the environmental one.}, - keywords = {3D printing,Acrylonitrile-butadiene-styrene (ABS),Additive manufacturing,Material characterization,Recycling}, - file = {/Users/fabio/Zotero/storage/CMMTGB4W/recycling-06-00004.pdf;/Users/fabio/Zotero/storage/GTHRX5QI/Sustainable Additive Manufacturing Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes.pdf} -} - -@article{vihervaaraTrendsEcosystemService2010, - title = {Trends in Ecosystem Service Research: {{Early}} Steps and Current Drivers}, - author = {Vihervaara, Petteri and R{\"o}nk{\"a}, Mia and Walls, Mari}, - year = {2010}, - month = jun, - journal = {Ambio}, - volume = {39}, - number = {4}, - pages = {314--324}, - publisher = {{Springer}}, - issn = {00447447}, - doi = {10.1007/s13280-010-0048-x}, - urldate = {2021-04-23}, - abstract = {Over the past 50 years, human beings have influenced ecosystems more rapidly than at any similar time in human history, drastically altering ecosystem functioning. Along with ecosystem transformation and degradation, a number of studies have addressed the functioning, assessment and management of ecosystems. The concept of ecosystem services has been developed in the scientific literature since the end of the 1970s. However, ecosystem service research has focused on certain service categories, ecosystem types, and geographical areas, while substantial knowledge gaps remain concerning several aspects. We assess the development and current status of ecosystem service research on the basis of publications collected from the Web of Science. The material consists of (1) articles (n = 353) from all the years included in the Web of Science down to the completion of the Millennium Ecosystem Assessment and (2) more recent articles (n = 687) published between 2006 and 2008. We also assess the importance of international processes, such as the Convention on Biological Diversity, the Kyoto Protocol and the Millennium Ecosystem Assessment, as drivers of ecosystem service research. Finally, we identify future prospects and research needs concerning the assessment and management of ecosystem services. \textcopyright{} 2010 Royal Swedish Academy of Sciences.}, - pmid = {20799681}, - keywords = {Ecosystem change,Ecosystem goods,Environmental management,Environmental policy,International conventions,Millennium Ecosystem Assessment}, - file = {/Users/fabio/Zotero/storage/28ZZJFAV/full-text.pdf} -} - -@article{vikBalancedReadinessLevel2021, - title = {Balanced Readiness Level Assessment ({{BRLa}}): {{A}} Tool for Exploring New and Emerging Technologies.}, - author = {Vik, Jostein and Mel{\aa}s, Anders Mahlum and Str{\ae}te, Egil Petter and S{\o}raa, Roger Andre}, - year = {2021}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {169}, - pages = {120854}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120854}, - urldate = {2021-06-08}, - file = {/Users/fabio/Zotero/storage/RZKPEVR2/full-text.pdf} -} - -@article{Vilaplana2006, - title = {Degradation of Recycled High-Impact Polystyrene. {{Simulation}} by Reprocessing and Thermo-Oxidation}, - author = {Vilaplana, Francisco and {Ribes-Greus}, Amparo and Karlsson, Sigbritt}, - year = {2006}, - journal = {Polymer Degradation and Stability}, - volume = {91}, - number = {9}, - pages = {2163--2170}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2006.01.007}, - abstract = {A simulation of the degradation of high-impact polystyrene (HIPS), occurring during service life and mechanical recycling, was performed by multiple processing and thermo-oxidative ageing. All samples were characterized by differential scanning calorimetry (DSC), melt mass-flow rate (MFR) measurements, tensile testing and infrared spectroscopy (FTIR). Multiple processing and thermo-oxidative ageing clearly alter the oxidative stability and the elongation at break of the materials. These changes observed at a macroscopic scale have been related to chemical alterations in the structure of HIPS. The polybutadiene phase was demonstrated to be the initiation point of the degradative processes induced by processing, service life and mechanical recycling. Thermo-oxidative degradation affects more severely the degree of degradation of the material, so it may be deduced that the changes occurring during service life of HIPS are the part of the life cycle that mostly affects its further recycling possibilities and performance in second-market applications. ?? 2006 Elsevier Ltd. All rights reserved.}, - isbn = {0141-3910}, - keywords = {Degree of degradation,High-impact polystyrene,Recycling,Reprocessing,Thermo-oxidation}, - file = {/Users/fabio/Zotero/storage/BYNKC2LA/Degradation of recycled high-impact polystyrene. Simulation by reprocessing and thermo-oxidation.pdf} -} - -@article{Vilaplana2007, - title = {Analytical Strategies for the Quality Assessment of Recycled High-Impact Polystyrene: {{A}} Combination of Thermal Analysis, Vibrational Spectroscopy, and Chromatography}, - author = {Vilaplana, Francisco and {Ribes-Greus}, Amparo and Karlsson, Sigbritt}, - year = {2007}, - journal = {Analytica Chimica Acta}, - volume = {604}, - number = {1}, - pages = {18--28}, - issn = {00032670}, - doi = {10.1016/j.aca.2007.04.046}, - abstract = {Various analytical techniques (thermal analysis, vibrational spectroscopy, and chromatographic analysis) were used in order to monitor the changes in polymeric properties of recycled high-impact polystyrene (HIPS) throughout mechanical recycling processes. Three key quality properties were defined and analysed; these were the degree of mixing (composition), the degree of degradation, and the presence of low molecular weight compounds. Polymeric contaminations of polyethylene (PE) and polypropylene (PP) were detected in some samples using differential scanning calorimetry (DSC). Vibrational spectroscopy showed the presence of oxidised parts of the polymeric chain and gave also an assessment of the microstructure of the polybutadiene phase in HIPS. The presence of low molecular weight compounds in the HIPS samples was demonstrated using microwave-assisted extraction followed by gas chromatography-mass spectrometry (GC-MS). Several volatile organic compounds (VOCs), residues from the polymerisation, additives, and contaminations were detected in the polymeric materials. Styrene was identified already in virgin HIPS; in addition, benzaldehyde, {$\alpha$}-methylbenzenaldehyde, and acetophenone were detected in recycled HIPS. The presence of oxygenated derivates of styrene may be attributed to the oxidation of polystyrene (PS). Several styrene dimers were found in virgin and recycled HIPS; these are produced during polymerisation of styrene and retained in the polymeric matrix as polymerisation residues. The amount of these dimers was highest in virgin HIPS, which indicated that emission of these compounds may have occurred during the first life-time of the products. This paper demonstrates that a combination of different analytical strategies is necessary to obtain a detailed understanding of the quality of recycled HIPS. \textcopyright{} 2007 Elsevier B.V. All rights reserved.}, - isbn = {0003-2670}, - pmid = {17983776}, - keywords = {Chromatographic techniques,Degradation,High-impact polystyrene,Quality analysis,Recycling,Thermal analysis,Vibrational spectroscopy}, - file = {/Users/fabio/Zotero/storage/HNCVFSGQ/Vilaplana, Ribes-Greus, Karlsson - 2007 - Analytical strategies for the quality assessment of recycled high-impact polystyrene A combina.pdf} -} - -@article{Vilaplana2008, - title = {Quality {{Concepts}} for the {{Improved Use}} of {{Recycled Polymeric Materials}}: {{A Review}}}, - author = {Vilaplana, Francisco and Karlsson, Sigbritt}, - year = {2008}, - month = apr, - journal = {Macromolecular Materials and Engineering}, - volume = {293}, - number = {4}, - pages = {274--297}, - issn = {14387492}, - doi = {10.1002/mame.200700393}, - urldate = {2014-07-15}, - file = {/Users/fabio/Zotero/storage/YU8EPWKU/Vilaplana, Karlsson - 2008 - Quality Concepts for the Improved Use of Recycled Polymeric Materials A Review.pdf} -} - -@article{Vilaplana2010, - title = {Environmental and Resource Aspects of Sustainable Biocomposites}, - author = {Vilaplana, Francisco and Str{\"o}mberg, Emma and Karlsson, Sigbritt}, - year = {2010}, - journal = {Polymer Degradation and Stability}, - volume = {95}, - number = {11}, - pages = {2147--2161}, - publisher = {{Elsevier Ltd}}, - issn = {01413910}, - doi = {10.1016/j.polymdegradstab.2010.07.016}, - abstract = {This review critically discusses the environmental and resource implications for the design of sustainable biocomposites. Sustainable biocomposites should satisfy several requirements: (i) renewable and/or recycled resources should be utilized for their manufacture; (ii) the synthetic, modification, and processing operations should be benign and energy effective; (iii) no hazardous environmental or toxicological effects should arise during any stage of their life cycle; and (iv) their waste management options should be implemented. The future integration of biorefineries and green chemistry will guarantee the availability of a wide range of raw materials for their preparation. The emission of volatile organic compounds and the release of nanoparticles should be evaluated from a toxicological and environmental point of view. Finally, the susceptibility of sustainable biocomposites towards degradation, including abiotic effects (water absorption, thermo- and photo-oxidation) and biofilm formation and biodegradation, must be considered, to guarantee their structural and functional stability during service life, and to ensure their biodegradability and assimilation during composting. ?? 2010 Elsevier Ltd. All rights reserved.}, - isbn = {0141-3910}, - keywords = {Biocomposite,Degradation,Life cycle analysis,Nanoparticle release,Renewable resources}, - file = {/Users/fabio/Zotero/storage/6DNK5VKG/Environmental and resource aspects of sustainable biocomposites.pdf} -} - -@article{Villalpando2014, - title = {An Optimization Approach for Components Built by Fused Deposition Modeling with Parametric Internal Structures}, - author = {Villalpando, L. and Eiliat, H. and Urbanic, R. J.}, - year = {2014}, - journal = {Procedia CIRP}, - volume = {17}, - pages = {800--805}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2014.02.050}, - abstract = {Additive manufacturing processes are employed to create physical models from three-dimensional (3D) computer-Aided design (CAD) math data. A solid model or water-Tight surface model is used as the input, which is sliced into layers, and travel paths are created for each layer. The object is built by layer by layer stacking, with supporting structures for overhanging geometry and undercuts being created where necessary (process dependent). Fused deposition modeling (FDM) is an additive fabrication process that builds a part from extruded filaments of a melted thermoplastic. Several studies have focused on the depositing parameters; however, none of them have characterized internal support structures in different geometrical arrangements. The incorporation of reconfigurable parametric internal matrix structures based on primitive elements will balance the mechanical properties, the material usage and the build time. Parametric internal structures are designed, and compressive test components built and tested both experimentally and using simulation tools to depict the compressive characteristics. Extensive physical testing is done as the components built by the FDM process have anisotropic properties. The material usage, build time, and loading characteristics are captured for a variety of parametric structures (solid, shell, orthogonal, hexagonal, pyramid) build orientations, and internal densities (loose, compact). From this data, a model is developed that serves as a predictive tool to: (i) estimate the mechanical properties and (ii) calculate the build time and materials utilized based on various internal structural configurations for he component's application. A model that generates an optimal solution (minimum material, minimum build time, etc.) needs to be developed. Using the collected data as a foundation, an optimization model that considers the build time, material usage, surface finish, interior geometry, strength characteristics, and related parameters is presented and can be used to assist designers making informed decision with respect to strength, material usage and time, etc. is developed using the Genetic Algorithm approach. ?? 2014 Elsevier B.V. This is an open access article under the CC BY-NC-ND license.}, - isbn = {22128271}, - keywords = {Additive manufacturing,Fused deposition modelling,Genetic algorithm,Internal parametric structures,Optimization}, - file = {/Users/fabio/Zotero/storage/TXXB4GSF/An optimization approach for components built by FDM with parametric internal structures (2014).pdf} -} - -@article{villamayor-tomasSocialMovementsCommons2022, - title = {Social {{Movements}} and {{Commons}}: {{In Theory}} and in {{Practice}}}, - author = {{Villamayor-Tomas}, Sergio and {Garc{\'i}a-L{\'o}pez}, Gustavo and D'Alisa, Giacomo}, - year = {2022}, - month = apr, - journal = {Ecological Economics}, - volume = {194}, - pages = {107328}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107328}, - urldate = {2022-01-27} -} - -@article{villarrubia-gomezMarinePlasticPollution2018, - title = {Marine Plastic Pollution as a Planetary Boundary Threat \textendash{} {{The}} Drifting Piece in the Sustainability Puzzle}, - author = {{Villarrubia-G{\'o}mez}, Patricia and Cornell, Sarah E. and Fabres, Joan}, - year = {2018}, - month = oct, - journal = {Marine Policy}, - volume = {96}, - pages = {213--220}, - issn = {0308-597X}, - doi = {10.1016/j.marpol.2017.11.035}, - urldate = {2022-09-26}, - abstract = {The exponential increase in the use of plastic in modern society and the inadequate management of the resulting waste have led to its accumulation in the marine environment. There is increasing evidence of numerous mechanisms by which marine plastic pollution is causing effects across successive levels of biological organization. This will unavoidably impact ecological communities and ecosystem functions. A remaining question to be answered is if the concentration of plastic in the ocean, today or in the future, will reach levels above a critical threshold leading to global effects in vital Earth-system processes, thus granting the consideration of marine plastic pollution as a key component of the planetary boundary threat associated with chemical pollutants. Possible answers to this question are explored by reviewing and evaluating existing knowledge of the effects of plastic pollution in marine ecosystems and the `core planetary boundaries', biosphere integrity and climate change. The irreversibility and global ubiquity of marine plastic pollution mean that two essential conditions for a planetary boundary threat are already met. The Earth system consequences of plastic pollution are still uncertain, but pathways and mechanisms for thresholds and global systemic change are identified. Irrespective of the recognition of plastic as a novel entity in the planetary boundaries framework, it is certain that marine plastic pollution is closely intertwined with global processes to a point that deserves careful management and prevention.}, - langid = {english}, - keywords = {Earth resilience,Earth system governance,Earth-system processes,Marine litter,Marine plastic,Microplastics,Planetary boundaries,Pollution}, - file = {/Users/fabio/Zotero/storage/SLNW297G/Villarrubia-Gómez et al_2018_Marine plastic pollution as a planetary boundary threat – The drifting piece in.pdf;/Users/fabio/Zotero/storage/WTHHDTEA/S0308597X17305456.html} -} - -@misc{villedenancyNANCY2030CAP2018, - title = {{NANCY 2030 CAP SUR LA VILLE \'ECOLOGIQUE}}, - author = {{Ville de Nancy}}, - year = {2018}, - journal = {calameo.com}, - urldate = {2023-03-03}, - abstract = {Laurent H\'enart, maire de Nancy et Pierre Mutzenhardt, pr\'esident de l'universit\'e de Lorraine pr\'esentent les conclusions de cette ann\'ee de r\'eflexion consacr\'ee \`a la transition \'ecologique, \`a travers 90 actions concr\`etes.}, - howpublished = {https://www.calameo.com/read/001390161e9ff709974e6}, - langid = {french}, - file = {/Users/fabio/Zotero/storage/R7GFMB4Z/001390161e9ff709974e6.html} -} - -@article{vinayavekhinEmergingTrendsRoadmapping2021, - title = {Emerging Trends in Roadmapping Research: {{A}} Bibliometric Literature Review}, - author = {Vinayavekhin, Sukrit and Phaal, Robert and Thanamaitreejit, Thananunt and Asatani, Kimitaka}, - year = {2021}, - month = sep, - journal = {https://doi.org/10.1080/09537325.2021.1979210}, - pages = {1--15}, - publisher = {{Routledge}}, - doi = {10.1080/09537325.2021.1979210}, - urldate = {2021-09-27}, - abstract = {Roadmapping practice and research have evolved together over the past three decades, in response to the changing application context, such as the emergence of cutting-edge technologies and rapid so...}, - keywords = {bibliometric analysis,innovation and strategic planning,literature review,Technology Roadmapping (TRM)}, - file = {/Users/fabio/Zotero/storage/Y24F3ERH/full-text.pdf} -} - -@article{vinesUnderstandingTradeoffsNational2023, - title = {Understanding the Trade-Offs of National Municipal Solid Waste Estimation Methods for Circular Economy Policy}, - author = {Vines, Valerie and Pasquali, Matt and Ganguli, Swarupa and Meyer, David E.}, - year = {2023}, - month = may, - journal = {Journal of Cleaner Production}, - pages = {137349}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137349}, - urldate = {2023-05-11}, - abstract = {Policies embracing circular economy concepts have taken hold in national legislation around the world. As the number of governments and organizations adopting circular economy policies increases, so does the need for accurate and timely measurement of material resource flows. Since many countries do not have access to centrally reported municipal solid waste (MSW) data, estimation and modeling are critical in evaluating circular economy policy effectiveness. The purpose of this paper is to examine three modeling approaches estimating national MSW data in the United States, including industry-based material flow analysis, waste-extended input-output modeling, and aggregated regional waste reporting. We establish five criteria to guide the analysis through the context of policy monitoring (data quality, flow totality, update frequency, sensitivity to disruption, and product granularity) and use these criteria to analyze and score each model. We then use a literature search to identify five, internationally-implemented options for circular economy policy and determine the data and modeling components that are most helpful in evaluating policy effectiveness. Finally, we provide a crosswalk of the model scores and policy needs to inform the suitability of model selection by policy type. We found that data quality and update frequency are identified as critical components for evaluating circular economy policies within the models evaluated, and can both be fulfilled by aggregated regional waste reporting. Flow totality, sensitivity to disruption, and product granularity requirements vary by both model and policy types. While none of the evaluated models satisfy the combination of requirements for any of the five policies, industry-based material flow analysis offers flow totality for extended producer responsibility, landfill bans, and recycling rate target policies that typically require it. The waste-extended input-output model can provide disruption sensitivity and product granularity as needed for policies like minimum recycled content and market restrictions. Policy developers in areas where strong centralized data collection is not an option should design policy action(s) with modeling tradeoffs in mind, including the potential hybridization of modeling approaches that may provide the most accurate national MSW estimates.}, - langid = {english}, - keywords = {Circular economy,Material flow analysis,Municipal solid waste,Regional data reporting,Waste-extended input-output}, - file = {/Users/fabio/Zotero/storage/PKQGY5DK/Vines et al. - 2023 - Understanding the trade-offs of national municipal.pdf;/Users/fabio/Zotero/storage/IZR8SD69/S095965262301507X.html} -} - -@article{vinkApplicationsLifeCycle2003, - title = {Applications of Life Cycle Assessment to {{NatureWorks}}\texttrademark{} Polylactide ({{PLA}}) Production}, - author = {Vink, Erwin T. H. and R{\'a}bago, Karl R. and Glassner, David A. and Gruber, Patrick R.}, - year = {2003}, - month = jan, - journal = {Polymer Degradation and Stability}, - volume = {80}, - number = {3}, - pages = {403--419}, - issn = {0141-3910}, - doi = {10.1016/S0141-3910(02)00372-5}, - urldate = {2022-09-13}, - abstract = {NatureWorks\texttrademark{} polylactide (PLA)11NatureWorks\texttrademark : Trademark Cargill Dow LLC. is a versatile polymer produced by Cargill Dow LLC. Cargill Dow is building a global platform of sustainable polymers and chemicals entirely made from renewable resources. Cargill Dow's business philosophy is explained including the role of life cycle assessment (LCA), a tool used for measuring environmental sustainability and identifying environmental performance-improvement objectives. The paper gives an overview of applications of LCA to PLA production and provides insight into how they are utilized. The first application reviews the contributions to the gross fossil energy requirement for PLA (54 MJ/kg). In the second one PLA is compared with petrochemical-based polymers using fossil energy use, global warming and water use as the three impact indicators. The last application gives more details about the potential reductions in energy use and greenhouse gasses. Cargill Dow's 5\textendash 8 year objective is to decrease the fossil energy use from 54 MJ/kg PLA down to about 7 MJ/kg PLA. The objective for greenhouse gasses is a reduction from +1.8 down to -1.7 kg CO2 equivalents/kg PLA.}, - langid = {english}, - keywords = {Cargill Dow,Eco-profile,Life cycle assessment (LCA),NatureWorks,Polylactic acid,Polylactide (PLA),Sustainability}, - file = {/Users/fabio/Zotero/storage/A9NSAAPM/Vink et al. - 2003 - Applications of life cycle assessment to NatureWor.pdf;/Users/fabio/Zotero/storage/2QKJFCH2/S0141391002003725.html} -} - -@article{vinkLifeCycleInventory2015, - title = {Life {{Cycle Inventory}} and {{Impact Assessment Data}} for 2014 {{Ingeo}}\texttrademark{} {{Polylactide Production}}}, - author = {Vink, Erwin T.H. and Davies, Steve}, - year = {2015}, - month = jun, - journal = {Industrial Biotechnology}, - volume = {11}, - number = {3}, - pages = {167--180}, - publisher = {{Mary Ann Liebert, Inc., publishers}}, - issn = {1550-9087}, - doi = {10.1089/ind.2015.0003}, - urldate = {2022-09-13}, - abstract = {Ingeo polylactides are versatile biopolymers made from annually renewable resources and produced since 2001 by NatureWorks at what is now a 150,000\,t/y facility in Blair, NE. NatureWorks published ecoprofile data for Ingeo production in 2003, 2007, and 2010. All the ecoprofiles were calculated using the Boustead Model, which has also been used by the European trade groupPlasticsEurope (Brussels) since the early 1990s. Since 2011, PlasticsEurope has been updating the ecoprofiles for major fossil-based polymers using different life cycle assessment (LCA) consultants and updated databases. To ensure consistency and ease of comparison, NatureWorks has just updated the Ingeo ecoprofile it published in 2010 using the GaBi (version 6.3) LCA software and the latest available databases. This paper provides a description of the Ingeo production system, the 2014 Ingeo ecoprofile, and the calculation and evaluation of different environmental indicators. The results for primary, nonrenewable energy and greenhouse gas emissions are compared with the latest available data for a selection of fossil-based polymers produced in Europe and the US. This work also discusses topics such as the value proposition of biobased materials, land use for Ingeo production, land-use change, and water use, and also provides remarks about the interpretation of some life cycle impact assessment indicators.}, - keywords = {biobased plastic,bioplastic,biopolymer,ecoprofile,Ingeo,life cycle assessment (LCA),NatureWorks,polylactic acid,polylactide}, - file = {/Users/fabio/Zotero/storage/XSTQ7MLN/Vink y Davies - 2015 - Life Cycle Inventory and Impact Assessment Data fo.pdf} -} - -@article{Vinodh2014, - title = {Integrated {{Fuzzy AHP}}\textendash{{TOPSIS}} for Selecting the Best Plastic Recycling Method: {{A}} Case Study}, - author = {Vinodh, S. and Prasanna, M. and Hari Prakash, N.}, - year = {2014}, - month = mar, - journal = {Applied Mathematical Modelling}, - publisher = {{Elsevier Inc.}}, - issn = {0307904X}, - doi = {10.1016/j.apm.2014.03.007}, - urldate = {2014-06-24}, - keywords = {analytic hierarchy process,multi-criterion decision making}, - file = {/Users/fabio/Zotero/storage/PXWRHPNJ/Integrated Fuzzy AHP–TOPSIS for selecting the best plastic recycling method A case study.pdf} -} - -@article{virmajokiLimitsConceivabilityStudy2022, - title = {Limits of Conceivability in the Study of the Future. {{Lessons}} from Philosophy of Science}, - author = {Virmajoki, Veli}, - year = {2022}, - month = sep, - journal = {Futures}, - volume = {142}, - pages = {102993}, - issn = {0016-3287}, - doi = {10.1016/j.futures.2022.102993}, - urldate = {2022-08-11}, - abstract = {In this paper, the epistemological and conceptual limits of our ability to conceive and reason about future possibilities are analyzed. It is argued that more attention should be paid in futures studies on these epistemological and conceptual limits. Drawing on three cases from philosophy of science, the paper argues that there are deep epistemological and conceptual limits in our ability to conceive and reason about alternatives to the current world. The nature and existence of these limits are far from obvious and become visible only through careful investigation. The cases establish that we often are unable to conceive relevant alternatives; that historical and counterfactual considerations are more limited than has been suggested; and that the present state of affairs reinforces its hegemony through multiple conceptual and epistemological mechanisms. The paper discusses the reasons behind the limits of the conceivability and the consequences that follow from the considerations that make the limits visible. The paper suggests that the epistemological and conceptual limits in our ability to conceive and reason about possible futures should be mapped systematically. The mapping would provide a better understanding of the creative and critical bite of futures studies.}, - langid = {english}, - keywords = {Alternative futures,Conceivability,Counterfactuals,History,Philosophy of science,Plausible futures,Possible futures}, - file = {/Users/fabio/Zotero/storage/PCVK8M3T/Virmajoki_2022_Limits of conceivability in the study of the future.pdf;/Users/fabio/Zotero/storage/NWSA7IAG/S0016328722000933.html} -} - -@misc{Visentin2020, - title = {Life Cycle Sustainability Assessment: {{A}} Systematic Literature Review through the Application Perspective, Indicators, and Methodologies}, - author = {Visentin, Caroline and Trentin, Adan William da Silva and Braun, Adeli Beatriz and Thom{\'e}, Ant{\^o}nio and {William da Silva Trentin}, Adan and Braun, Adeli Beatriz and Thom{\'e}, Ant{\^o}nio}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {270}, - pages = {122509}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122509}, - urldate = {2020-06-18}, - abstract = {Sustainability has become a key factor in recent years. Countless methods have been developed to assess sustainability, such as the case of the Life Cycle Sustainability Analysis (LCSA). Thus, this article aims to identify and map the application of LCSA in the main scientific databases, through a process of bibliometric and systematic literature review. Therefore, a bibliographic portfolio that represents the publications of the LCSA was selected based on selection criteria, after which the bibliometric and systematic analyses were performed. The bibliometric analysis identified the temporal distribution of publications, journals, authors, and countries that contribute to the context, as well as a studies' keyword analysis. The systematic analysis was carried out by verifying the types of studies present in the bibliographic portfolio, the economic sectors and countries of applied studies localization, the indicators and methodologies used to evaluate each sustainability dimension, and the main methodologies for results final analyses were also verified. The selected bibliographic portfolio consisted of 105 publications, corresponding to the period 2008\textendash 2019. The results show that developed countries have a greater number of publications. However, China stands out with the highest number of publications. Most of the studies in the portfolio are developments of methodologies and applications in case studies. The applied studies covered several economic and global localization sectors. Moreover, it was found that there is a great variability of environmental, economic, and social indicators employed, as well as methodologies for analyzing the final results. For example, the main indicators were: eutrophication and acidification; electricity and operating and maintenance costs, and employment; and multi-criteria decision analysis (MDCA) was the most widely used methodology. This research makes several new contributions, providing academics and professionals with an overview of the application of LCSA, through scientific indexes and the main approaches of publications, as well as the perspectives of new research.}, - keywords = {Bibliometric,Decision-making,Life cycle sustainability assessment (LCSA),Sustainability,Systematic review}, - file = {/Users/fabio/Zotero/storage/IADZ9QH5/Visentin et al. - 2020 - Life cycle sustainability assessment A systematic literature review through the application perspective, indica.pdf} -} - -@article{Viseur2012, - title = {From\_{{Open}}\_{{Source}}\_{{Software}}\_to\_{{Open}}\_{{Patenting}}\_}, - author = {Viseur, Robert and Polytechnique, Facult{\'e}}, - year = {2012}, - pages = {286--291}, - file = {/Users/fabio/Zotero/storage/QGR55ZTL/From Open Source Software to Open Source Hardware .pdf} -} - -@incollection{Viseur2012a, - title = {From Open Source Software to Open Source Hardware}, - author = {Viseur, Robert}, - year = {2012}, - pages = {286--291}, - doi = {10.1007/978-3-642-33442-9_23} -} - -@article{Visschers2016, - title = {Sorting out Food Waste Behaviour: {{A}} Survey on the Motivators and Barriers of Self-Reported Amounts of Food Waste in Households}, - author = {Visschers, Vivianne H.M. and Wickli, Nadine and Siegrist, Michael}, - year = {2016}, - journal = {Journal of Environmental Psychology}, - volume = {45}, - pages = {66--78}, - publisher = {{Elsevier Ltd}}, - issn = {15229610}, - doi = {10.1016/j.jenvp.2015.11.007}, - abstract = {Households in Western countries are responsible for a large amount of food that is not consumed, but instead is wasted, which has large environmental impacts. To reduce this amount, we should understand the predictors of consumers' food waste. We conducted a large mail survey in Switzerland to investigate which determinants explain the self-reported amount of food waste in households. Determinants were taken from the theory of planned behaviour (TPB), as well as personal norms, knowledge, household planning habits and the good provider identity. Self-reported amounts of food waste were assessed for 11 food groups. The TPB determinants, together with the good provider identity, explained the amount of food waste well. Moreover, different predictors appeared relevant for waste in different food categories. To reduce food waste in households, interventions should focus on increasing consumers' perceived behavioural control over food waste and persuading them that they can be a good provider without wasting food.}, - isbn = {0272-4944}, - pmid = {17436171}, - keywords = {Consumer behaviour,Food waste,Good provider identity,Perceived behavioural control,Theory of planned behaviour}, - file = {/Users/fabio/Zotero/storage/AH4EZXYS/Sorting out food waste behaviour A survey on the motivators and barriers of self-reported amounts of food waste in households.pdf} -} - -@article{Vock2019, - title = {Powders for Powder Bed Fusion: A Review}, - author = {Vock, Silvia and Kl{\"o}den, Burghardt and Kirchner, Alexander and Wei{\ss}g{\"a}rber, Thomas and Kieback, Bernd}, - year = {2019}, - month = feb, - journal = {Progress in Additive Manufacturing}, - issn = {2363-9512}, - doi = {10.1007/s40964-019-00078-6} -} - -@article{Vogt2014, - title = {Recycling Behaviour in Healthcare: Waste Handling at Work}, - author = {Vogt, Joachim and Nunes, Katia R.A.}, - year = {2014}, - month = apr, - journal = {Ergonomics}, - volume = {57}, - number = {4}, - pages = {525--535}, - issn = {0014-0139}, - doi = {10.1080/00140139.2014.887786} -} - -@article{vogtWhyRecyclingPostconsumer2021, - ids = {vogt2021a,vogt2021b}, - title = {Why Is {{Recycling}} of {{Postconsumer Plastics}} so {{Challenging}}?}, - author = {Vogt, Bryan D. and Stokes, Kristoffer K. and Kumar, Sanat K.}, - year = {2021}, - month = sep, - journal = {ACS Applied Polymer Materials}, - volume = {3}, - number = {9}, - pages = {4325--4346}, - publisher = {{American Chemical Society}}, - doi = {10.1021/acsapm.1c00648}, - urldate = {2023-08-31}, - abstract = {The ubiquitous use of plastics has been driven by their combination of low cost and properties, but these attributes directly challenge waste management schemes for plastic recycling. Some postconsumer recycling programs are now nearly 50 years old, but a significant fraction of plastics still finds landfills or other dumping strategies at their end of life. With the growing concern regarding plastic waste, especially ocean plastics, there is a need for innovation and alternative strategies for the economic translation of plastic waste to valued product(s) that will promote their efficient circular utilization. This review first describes the technical and economic hurdles associated with the recycling of postconsumer plastics, but then it focuses on providing an overview of emergent strategies to recover plastic waste through new polymer design, new recycling processes, and chemical transformations to value-added products. Specific challenges discussed include plastic waste sorting and separations, product variability including additives, and the high efficiency/low cost in which the existing petrochemical industry can produce virgin polymers, in particular polyolefins. Although a wide variety of technical strategies have been demonstrated for recycling of plastics through both mechanical and chemical means, the commercial success of these different strategies is generally limited by either performance, including large variance in key metrics, or economics where the products can match the performance of virgin materials but the recycling process is expensive. Successful capture of postconsumer plastic waste through recycling likely will depend on economic incentives and government regulations.}, - file = {/Users/fabio/Zotero/storage/H3LBADN2/Vogt et al. - 2021 - Why is Recycling of Postconsumer Plastics so Chall.pdf} -} - -@article{VOLCOXNumericalSimulation2021, - title = {{{VOLCO-X}}: Numerical Simulation of Material Distribution and Voids in Extrusion Additive Manufacturing}, - year = {2021}, - month = feb, - journal = {Additive Manufacturing}, - pages = {101900}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.101900}, - urldate = {2021-02-14} -} - -@article{volkTechnoeconomicAssessmentComparison2021, - title = {Techno-Economic Assessment and Comparison of Different Plastic Recycling Pathways: {{A German}} Case Study}, - author = {Volk, Rebekka and Stallkamp, Christoph and Steins, Justus J. and Yogish, Savina Padumane and M{\"u}ller, Richard C. and Stapf, Dieter and Schultmann, Frank}, - year = {2021}, - month = oct, - journal = {Journal of Industrial Ecology}, - volume = {25}, - number = {5}, - pages = {1318--1337}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13145}, - urldate = {2022-01-25}, - abstract = {Greenhouse gas (GHG) emissions need to be reduced to limit global warming. Plastic production requires carbon raw materials and energy that are associated today with predominantly fossil raw materials and fossil GHG emissions. Worldwide, the plastic demand is increasing annually by 4\%. Recycling technologies can help save or reduce GHG emissions, but they require comparative assessment. Thus, we assess mechanical recycling, chemical recycling by means of pyrolysis and a consecutive, complementary combination of both concerning Global Warming Potential (GWP) [CO2e], Cumulative Energy Demand (CED) [MJ/kg], carbon efficiency [\%], and product costs [\texteuro ] in a process-oriented approach and within defined system boundaries. The developed techno-economic and environmental assessment approach is demonstrated in a case study on recycling of separately collected mixed lightweight packaging (LWP) waste in Germany. In the recycling paths, the bulk materials polypropylene (PP), polyethylene (PE), polyvinylchloride (PVC), and polystyrene (PS) are assessed. The combined mechanical and chemical recycling (pyrolysis) of LWP waste shows considerable saving potentials in GWP (0.48~kg CO2e/kg~input), CED (13.32~MJ/kg~input), and cost (0.14 \texteuro/kg~input) and a 16\% higher carbon efficiency compared to the baseline scenario with state-of-the-art mechanical recycling in Germany. This leads to a combined recycling potential between 2.5 and 2.8 million metric tons/year that could keep between 0.8 and 2 million metric tons/year additionally in the (circular) economy instead of incinerating them. This would be sufficient to reach both EU and German recycling rate targets (EC 2018). This article met the requirements for a gold-silver JIE data openness badge described at http://jie.click/badges.}, - keywords = {carbon management,chemical/feedstock recycling,circular economy,environmental accounting,GHG emissions,plastics recycling}, - file = {/Users/fabio/Zotero/storage/YI5C3MYM/full-text.pdf} -} - -@article{vollmerMechanicalRecyclingGiving2020, - title = {Beyond {{Mechanical Recycling}}: {{Giving New Life}} to {{Plastic Waste}}}, - shorttitle = {Beyond {{Mechanical Recycling}}}, - author = {Vollmer, Ina and Jenks, Michael J. F. and Roelands, Mark C. P. and White, Robin J. and {van Harmelen}, Toon and {de Wild}, Paul and {van der Laan}, Gerard P. and Meirer, Florian and Keurentjes, Jos T. F. and Weckhuysen, Bert M.}, - year = {2020}, - journal = {Angewandte Chemie International Edition}, - volume = {59}, - number = {36}, - pages = {15402--15423}, - issn = {1521-3773}, - doi = {10.1002/anie.201915651}, - urldate = {2023-08-31}, - abstract = {Increasing the stream of recycled plastic necessitates an approach beyond the traditional recycling via melting and re-extrusion. Various chemical recycling processes have great potential to enhance recycling rates. In this Review, a summary of the various chemical recycling routes and assessment via life-cycle analysis is complemented by an extensive list of processes developed by companies active in chemical recycling. We show that each of the currently available processes is applicable for specific plastic waste streams. Thus, only a combination of different technologies can address the plastic waste problem. Research should focus on more realistic, more contaminated and mixed waste streams, while collection and sorting infrastructure will need to be improved, that is, by stricter regulation. This Review aims to inspire both science and innovation for the production of higher value and quality products from plastic recycling suitable for reuse or valorization to create the necessary economic and environmental push for a circular economy.}, - copyright = {\textcopyright{} 2020 The Authors. Published by Wiley-VCH Verlag GmbH \& Co. KGaA}, - langid = {english}, - keywords = {catalysis,chemical recycling,circularity,plastic waste,solvolysis}, - file = {/Users/fabio/Zotero/storage/NAJWM2Z5/Vollmer et al_2020_Beyond Mechanical Recycling.pdf;/Users/fabio/Zotero/storage/BYEPEHHL/anie.html} -} - -@article{Volpato2015, - title = {Experimental Analysis of an Extrusion System for Additive Manufacturing Based on Polymer Pellets}, - author = {Volpato, N. and Kretschek, D. and Foggiatto, J. A. and {Gomez da Silva Cruz}, C. M.}, - year = {2015}, - month = dec, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {81}, - number = {9-12}, - pages = {1519--1531}, - issn = {0268-3768}, - doi = {10.1007/s00170-015-7300-2}, - keywords = {Additive manufacturing,Degradation,Granule feeding,Pellets,Polymer extrusion,Polypropylene}, - file = {/Users/fabio/Zotero/storage/7DJP2J32/Volpato et al. - 2015 - Experimental analysis of an extrusion system for additive manufacturing based on polymer pellets.pdf} -} - -@article{Vona2013, - title = {Teaching Robotics Software with the Open Hardware Mobile Manipulator}, - author = {Vona, Marsette and Shekar, N.H.}, - year = {2013}, - month = feb, - journal = {IEEE Transactions on Education}, - volume = {56}, - number = {1}, - pages = {42--47}, - issn = {0018-9359}, - doi = {10.1109/TE.2012.2218657} -} - -@article{VonDohren2015, - title = {Ecosystem Disservices Research: {{A}} Review of the State of the Art with a Focus on Cities}, - author = {Von D{\"o}hren, Peer and Haase, Dagmar}, - year = {2015}, - month = may, - journal = {Ecological Indicators}, - volume = {52}, - pages = {490--497}, - publisher = {{Elsevier}}, - issn = {1470-160X}, - urldate = {2021-12-10}, - abstract = {Ecosystem services, the benefits produced by ecosystem functions and structures for human well-being, have received continuous international attention since the publication of the Millennium Ecosystem Assessment (MA) and the TEEB study (The Economics of Ecosystem Services and Biodiversity). Ecosystem functions also have effects that are harmful to human well-being, and these effects are called ecosystem disservices (EDS). The aim of this paper is to explore how ecosystem disservices have been recognised in the scientific literature and how the concept has been used in the discussion of socio-ecological systems. The paper analyses 103 studies on EDS. We use a quantitative approach to assess geographical spread, focus and indicator choice. This quantitative picture is supplemented by a qualitative discussion of the effects of ecosystem disservices on urban systems and cities. The results of the review show that although the idea of detrimental ecosystem effects is not new, systematic research on EDS has only just begun. Most studies on EDS focus on Western Europe or the USA. EDS have been more frequently discussed in the most human-dominated ecosystem types: i.e., in agricultural and urban ecosystems. The latter in particular will be central for future research on EDS, considering that more than 75\% of the world's population is expected to live in urban environments by 2050.}, - keywords = {Cities,Ecosystem disservices,Human well-being,Indicators,Literature review}, - file = {/Users/fabio/Zotero/storage/RA8RULTP/Von Döhren, Haase - 2015 - Ecosystem disservices research A review of the state of the art with a focus on cities.pdf} -} - -@article{VonHippel2001a, - title = {Innovation by User Communities: Learning from {{Open-Source Software}}}, - author = {Von Hippel, Eric}, - year = {2001}, - journal = {MIT Sloan Management Review}, - volume = {Summer}, - pages = {82--86}, - publisher = {{MIT}} -} - -@book{VonHippel2005, - title = {Democratizing Innovation: {{The}} Evolving Phenomenon of User Innovation}, - author = {{von Hippel}, Eric A.}, - year = {2005}, - month = jan, - journal = {Journal f\"ur Betriebswirtschaft}, - volume = {55}, - publisher = {{MIT Press}}, - abstract = {When I say that innovation is being democratized, I mean that users of products and services\textemdash both firms and individual consumers\textemdash are increasingly able to innovate for themselves. User-centered innovation processes offer great advantages over the manufacturer-centric innovation development systems that have been the mainstay of commerce for hundreds of years. Users that innovate can develop exactly what they want, rather than relying on manufacturers to act as their (often very imperfect) agents. Moreover, individual users do not have to develop everything they need on their own: they can benefit from innovations developed and freely shared by others.}, - file = {/Users/fabio/Zotero/storage/B6FDAPHE/Democratizing Innovation.pdf} -} - -@incollection{VonHippel2010, - title = {Open User Innovation}, - booktitle = {Handbook of the {{Economics}} of {{Innovation}}}, - author = {Von Hippel, Eric}, - year = {2010}, - month = jan, - volume = {1}, - pages = {411--427}, - publisher = {{North-Holland}}, - issn = {22108807}, - doi = {10.1016/S0169-7218(10)01009-9}, - urldate = {2022-04-19}, - abstract = {Almost 30 years ago, researchers began a systematic study of innovation by end users and user firms. At that time, the phenomenon was generally regarded as a minor oddity. Today, it is clear that innovation by users, generally openly shared, is a very powerful and general phenomenon. It is rapidly growing due to continuing advances in computing and communication technologies. It is becoming both an important rival to and an important feedstock for producer-centered innovation in many fields. In this chapter, I provide an overview of what the international research community now understands about this phenomenon. \textcopyright{} 2010 Prof. Eric von Hippel. Published by Elsevier B.V.}, - keywords = {Collaborative innovation,Open innovation,User innovation} -} - -@article{VonHippel2020, - title = {Behavioral Innovation: {{Pilot}} Study and New Big Data Analysis Approach in Household Sector User Innovation}, - author = {{von Hippel}, Christiana D. and Cann, Andrew B.}, - year = {2020}, - month = may, - journal = {Research Policy}, - pages = {103992}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.103992}, - urldate = {2020-05-28}, - file = {/Users/fabio/Zotero/storage/CWK8MRCQ/full-text.pdf} -} - -@article{vonhippelNextgenerationConsumerInnovation2020, - title = {Next-Generation Consumer Innovation Search: {{Identifying}} Early-Stage Need-Solution Pairs on the Web}, - author = {{von Hippel}, Eric and Kaulartz, Sandro}, - year = {2020}, - month = jun, - journal = {Research Policy}, - pages = {104056}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104056}, - urldate = {2020-07-20}, - file = {/Users/fabio/Zotero/storage/KICJ5YAD/full-text.pdf} -} - -@article{Vrij2019, - title = {Reading {{Lies}}: {{Nonverbal Communication}} and {{Deception}}}, - author = {Vrij, Aldert and Hartwig, Maria and Granhag, P{\"a}r Anders}, - year = {2019}, - month = jan, - journal = {Annual Review of Psychology}, - volume = {70}, - number = {1}, - pages = {295--317}, - issn = {0066-4308}, - doi = {10.1146/annurev-psych-010418-103135}, - abstract = {The relationship between nonverbal communication and deception continues to attract much interest, but there are many misconceptions about it. In this review, we present a scientific view on this relationship. We describe theories explaining why liars would behave differently from truth tellers, followed by research on how liars actually behave and individuals' ability to detect lies. We show that the nonverbal cues to deceit discovered to date are faint and unreliable and that people are mediocre lie catchers when they pay attention to behavior. We also discuss why individuals hold misbeliefs about the relationship between nonverbal behavior and deception\textemdash beliefs that appear very hard to debunk. We further discuss the ways in which researchers could improve the state of affairs by examining nonverbal behaviors in different ways and in different settings than they currently do.} -} - -@article{vrontisConsequencesTechnologySocial2021, - title = {Consequences of Technology and Social Innovation on Traditional Business Model}, - author = {Vrontis, Demetris and Morea, Donato and Basile, Gianpaolo and Bonacci, Isabella and Mazzitelli, Andrea}, - year = {2021}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {170}, - pages = {120877}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120877}, - urldate = {2021-06-10} -} - -@article{vuoriHowRemoveMicroplastics2022, - title = {How to Remove Microplastics in Wastewater? {{A}} Cost-Effectiveness Analysis}, - author = {Vuori, Larissa and Ollikainen, Markku}, - year = {2022}, - month = feb, - journal = {Ecological Economics}, - volume = {192}, - pages = {107246}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107246}, - urldate = {2021-11-07} -} - -@article{w.RoleEarlyPrototypes, - title = {The {{Role}} of {{Early Prototypes}} in {{Concept Development}}: {{Insights From}} the {{Automotive Industry}}}, - author = {W., Elverum C. and T., Welo}, - journal = {Procedia CIRP}, - volume = {21}, - pages = {491--496}, - urldate = {2021-02-16} -} - -@article{wachholzWillEUCircular2020, - title = {Will {{EU Circular Economy Policies Lead Us}} to {{Sustainable Development}}? {{A Viewpoint}} from an {{Environmental NGO Perspective}}}, - author = {Wachholz, Carsten}, - year = {2020}, - journal = {The Circular Economy in the European Union}, - pages = {57--66}, - publisher = {{Springer International Publishing}}, - doi = {10.1007/978-3-030-50239-3_7}, - urldate = {2022-03-13} -} - -@article{wadstromFrameworkStudyingOutcomes2021, - title = {A Framework for Studying Outcomes in Industrial Symbiosis}, - author = {Wadstr{\"o}m, Christoffer and Johansson, Maria and Wall{\'e}n, Magnus}, - year = {2021}, - month = nov, - journal = {Renewable and Sustainable Energy Reviews}, - volume = {151}, - pages = {111526}, - publisher = {{Pergamon}}, - issn = {1364-0321}, - doi = {10.1016/J.RSER.2021.111526}, - urldate = {2021-09-21}, - abstract = {It is likely that different industrial symbiosis collaborations will have different sets of winners and losers when it comes to benefits or costs. In this study we present an analytical framework intended for evaluating a wide-range of industrial symbiosis outcomes that will aid in research design. The framework provide a base for including a broader, but also, specific set of effects and outcomes (economic, environmental and social), including a diverse set of clearly defined actors. Used consistently, the framework can average out costs and benefits across actors in the whole society, so that each actor is more likely to (over time) realize net positive outcomes from a full set of industrial symbiosis applications. The analytical framework is developed by combining theory and concepts from the system of national accounts, the planetary boundaries, and the social foundation. The analytical framework is then applied in a state of the art review, analysing value and benefits in 56 industrial symbiosis research articles. Besides providing a robust model for analysing industrial symbiosis, the results show that private market-based outcomes are the dominant form of economic value and that nonmarket valuations are completely absent. Environmental outcomes mainly consist of decreased CO2 emissions, chemical pollution and water use. Social outcomes include private income and work and network effects for the companies involved in the industrial symbiosis.}, - keywords = {Analytical framework,Circular economy,Economic value,Energy,Industrial symbiosis,State of the art review,Sustainability,Waste,Wastewater}, - file = {/Users/fabio/Zotero/storage/BFC2XRJ6/full-text.pdf} -} - -@book{Wadsworth, - title = {Quality {{Control}} , {{Robust Design}} , and the {{Taguchi Method}}}, - editor = {Dehnad, Khosrow and Laboratories, AT\&T Bell}, - address = {{Pacific Grove, California}}, - isbn = {978-1-4684-1474-5}, - file = {/Users/fabio/Zotero/storage/DZLTGA6V/Quality Control , Robust Design , and the Taguchi Method.pdf} -} - -@article{Wagner2017, - title = {Innovation {{Spaces}} : {{The New Design}} of {{Work}}}, - author = {Wagner, Julie and Watch, Dan}, - year = {2017}, - number = {April} -} - -@article{Wagner2019, - title = {Towards a More Circular Economy for {{WEEE}} Plastics \textendash{} {{Part A}}: {{Development}} of Innovative Recycling Strategies}, - author = {Wagner, F. and Peeters, J.R. R and De Keyzer, J. and Janssens, K. and Duflou, J.R. R and Dewulf, W.}, - year = {2019}, - month = dec, - journal = {Waste Management}, - volume = {100}, - pages = {269--277}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.09.026}, - urldate = {2021-01-05}, - abstract = {This two paper series describes a method to develop and evaluate innovative recycling strategies for WEEE plastics. Part A presents a SWOT analysis of a new dismantling based recycling process of plastic components and the integration in an existing post-shredder separation recycling facility. Subsequently, recycling strategies are developed and the economic potential is evaluated. Part B investigates the technical feasibility of the recycling strategies. As a case study the dismantling of LCD TV plastic back cover housings is taken. First, the advantages and disadvantages of the new process and the main external factors based on the market for recycled plastics and the waste material input are discussed on industrial level. Subsequently, five recycling strategies are developed: Strategy (1) produces recycled granulates with the dismantling process for direct re-application in electronic products, strategy (2) recycles plastics for the use as carrier materials for flame retardant masterbatches, strategy (3) blends the recycled plastic with post-shredder recyclates for material upgrading, strategy (4) recycles the plastics with the post-shredder process and strategy (5) thermally treats plastics. Finally, the economic evaluation shows that the special engineering plastics used for LCD TV back covers have very high virgin prices up to 5 \texteuro{} per kg. The implementation of the new process indicates a significant potential for value recovery based on plastics that would otherwise be incin-erated or downcycled.}, - keywords = {Economic evaluation,End-of-life treatment SWOT,Mechanical recycling,Plastics,Recycling strategies,WEEE}, - file = {/Users/fabio/Zotero/storage/RB7QWU8A/Wagner et al. - 2019 - Towards a more circular economy for WEEE plastics-Part A Development of innovative recycling strategies.pdf} -} - -@article{Wagner2020, - ids = {wagner2020a}, - title = {Legacy Additives in a Circular Economy of Plastics: {{Current}} Dilemma, Policy Analysis, and Emerging Countermeasures}, - author = {Wagner, Swetlana and Schlummer, Martin}, - year = {2020}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {158}, - pages = {104800}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104800}, - urldate = {2020-05-08}, - abstract = {Plastics are widely used because of their diverse mechanical and physicochemical properties, however, many plastic products can only achieve their specific characteristics if mixed with additives, like flame retardants, stabilizers, and plasticizers. Some of the formerly used plastic additives, however, are in the meantime evaluated as substances of very high concern (SVHC) or even persistent organic pollutants (POP) and are referred to as ``legacy additives''. Therefore, the improper disposal of legacy plastic waste as well as the recycling and reuse of such can lead to continuous circulation of harmful additives into the environment, threatening plant and animal life, and human health. The environmental threats posed by hazardous additives have been addressed by international regulations like the Registration, Evaluation, and Authorization of Chemicals (REACH) regulation and the Stockholm Convention. They set thresholds for hazardous chemicals including some legacy additives, which regulate trading and waste management, and aim at a fast phase out of hazardous compounds. At the same time, governmental, non-governmental and industrial players support a circular economy of goods including plastics, which resulted and will further result in increasing recycling quotas for waste plastics. When it comes to plastics containing legacy additives a conflict of objectives may arise, namely saving polymeric resources versus phase-out of hazardous compounds. This review paper discusses legacy additives in plastic waste streams, their end-of-life treatment options related to legislation covering these additives and links between regulation and waste management.}, - keywords = {Flame retardants,Low POP content,Persistent organic pollutants (POPs),Phthalates,Recycling,Waste management}, - file = {/Users/fabio/Zotero/storage/77GEJKN7/full-text.pdf;/Users/fabio/Zotero/storage/VBHDBRTN/S092134492030121X.html} -} - -@article{Wagner2020a, - title = {Quality Assessment of Mixed Plastic Flakes from {{Waste Electrical}} and {{Electronic Equipment}} ({{WEEE}}) by Spectroscopic Techniques}, - author = {Wagner, Florian and Peeters, Jef R. and Ramon, Hans and De Keyzer, Jozefien and Duflou, Joost R. and Dewulf, Wim}, - year = {2020}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {158}, - pages = {104801}, - publisher = {{Elsevier}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104801}, - urldate = {2020-03-23}, - abstract = {The quality of mechanically recycled plastics from WEEE is seen as one of the main bottlenecks for their re-application in high-quality products to enable a circular economy for these materials. Most literature focuses on the quality at the end of the value chain while significant potential to improve the performance of the entire value chain is seen by the quality assessment of input material of recyclers. In this research a testing procedure for mixed plastic flakes by Fourier-Transform InfraRed (FTIR) spectroscopy, X-Ray Fluorescence (XRF) and manual composition analysis assisted by computer vision. Mixed plastics from TV housings, washing machines, fridges and fridge drawers were taken as case studies. It is shown that unwanted plastic types, glass, metals, wood, rubber and foam as well as additives such as talc, calcium carbonate or brominated flame retardants can be detected by the procedure. In addition, a Failure Mode and Effect Analysis (FMEA) is shown to be a powerful tool for a risk-based assessment of the most relevant quality influences, which allows to define strategies for quality control. The economic evaluation showed that automation is required to allow the systematic use of the testing procedure.} -} - -@article{wagnerExploring14Years2020, - title = {Exploring 14 Years of Repair Records \textendash Information Retrieval, Analysis Potential and Data Gaps to Improve Reparability}, - author = {Wagner, Eduard and Bracquen{\'e}, Ellen and {Jaeger-Erben}, Melanie}, - year = {2020}, - month = nov, - journal = {Journal of Cleaner Production}, - pages = {125259}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.125259}, - urldate = {2020-12-21} -} - -@article{Wahab2007, - title = {Recycling Trends in the Plastics Manufacturing and Recycling Companies in {{Malaysia}}}, - author = {Wahab, D. A. and Abidin, A. and Azhari, C. H.}, - year = {2007}, - month = apr, - journal = {Journal of Applied Sciences}, - volume = {7}, - number = {7}, - pages = {1030--1035}, - publisher = {{Asian Network for Scientific Information}}, - issn = {18125662}, - doi = {10.3923/jas.2007.1030.1035}, - urldate = {2020-04-08}, - abstract = {This study presents the findings from a study on the consumption of recycled materials and recycling practices in the plastics manufacturing industry and recycling companies in Malaysia. The findings were obtained from a survey conducted in twenty plastic manufacturing companies and detailed case studies in three recycling companies. The survey conducted in the plastic manufacturing companies' shows that the consumption rate for poly-olefins (PP and PE) is the highest among the resin types and the industrial sector that consumes the most plastic materials is the electrical and electronics sector. The consumption of recycled materials is high among the local manufacturing companies (80\%) which are largely due to cost savings; about 20\% of these companies conducted in-house recycling. The study has also shown that the medium scale industry consumes the most recycled materials as compared to the large and small scale industry. The rate of disposal for plastic materials in the local industry is approximately 5\%. The detailed case studies conducted in the recycling companies have successfully identified the main processes involved in plastic recycling namely manual sorting, cleaning, drying, meshing/pelletising and packaging. These recycling companies obtained recycled materials from various sources including industrial scrap, dumping sites, local producers as well as imported sources. Pricing of recycled materials were based on classification according to grade and quality of the recycled materials. The study has reflected the extent of in-house recycling trends in the local plastic manufacturing companies and their dependency on the supply from the local recycling companies. \textcopyright{} 2007 Asian Network for Scientific Information.}, - keywords = {In-house recycling,Plastic waste management,Plastics recycling,Recycling process}, - file = {/Users/fabio/Zotero/storage/DJ8S8S9H/full-text.pdf} -} - -@article{Walker2018, - ids = {walker2018}, - title = {A Call for {{Canada}} to Move toward Zero Plastic Waste by Reducing and Recycling Single-Use Plastics}, - author = {Walker, Tony R. and Xanthos, Dirk}, - year = {2018}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {133}, - pages = {99--100}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2018.02.014}, - file = {/Users/fabio/Zotero/storage/G6VLX5JL/Walker y Xanthos - 2018 - A call for Canada to move toward zero plastic wast.pdf} -} - -@article{walkerAllOneAll2020, - title = {All for One or All for Three: {{Empirical}} Evidence of Paradox Theory in the Triple-Bottom-Line}, - author = {Walker, Kent and Yu, Xin and Zhang, Zhou}, - year = {2020}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {275}, - pages = {122881}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122881}, - urldate = {2020-08-09}, - abstract = {We empirically examine the triple-bottom-line of a sample of 746 firms from 2003 to 2013. The business case for sustainability advocates for corporate responsibilities only if they strengthen profits. In contrast, paradox theory states that managers should embrace the tensions between multiple bottom lines seeking simultaneous benefits. Combining data from KLD and Compustat, we find strong supporting evidence for paradox theory. First, the findings suggest that the three components of the triple bottom line move in tandem, rather than being mutually exclusive, where high (poor) performance in one dimension relates to high (poor) performance in the other two dimensions, regardless of the economic conditions. Second, using the Great Recession as an exogenous shock, we find supporting evidence for paradox theory. Lastly, we link paradox theory and its implication on market valuation; we find that the more components achieved at a high level, the higher the market valuation, with the valuation increasing per component achieved. We conclude that the traditional focus on scarcity and the mutual exclusivity of sustainability goals is not empirically supported in our study. Instead, we find compelling evidence for the abundance perspective of paradox theory and the simultaneous achievement of sustainability goals. Our results highlight that in viewing three bottom lines, managers should embrace any ostensible tensions to find creative ways to address all three instead of all for one.}, - keywords = {Abundance,Economic cycles,Great recession,Interrelationship,Paradox theory,Triple-bottom-line} -} - -@article{walkerAssessingSocialSustainability2021, - title = {Assessing the Social Sustainability of Circular Economy Practices: Industry Perspectives from {{Italy}} and the {{Netherlands}}}, - author = {Walker, Anna M. and Opferkuch, Katelin and Lindgreen, Erik Roos and Simboli, Alberto and Vermeulen, Walter J.V. and Raggi, Andrea}, - year = {2021}, - month = jan, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {831--844}, - publisher = {{Elsevier BV}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.01.030}, - urldate = {2021-03-07}, - abstract = {Despite the frequent association of circular economy (CE) with sustainability, most CE practices have yet to prove they actually contribute to achieving the sustainable development goals (SDGs), and social aspects in particular. To attain the consensually established targets in the SDG framework, it is vital to assess the impact of CE practices. As most of these practices are carried out in a network of actors, sustainability assessment approaches from the fields of industrial ecology and supply chain management are particularly suitable. However, both fields are known for their limited inclusion of the social dimension. While scholars have already started to explore the assessment of social sustainability within the context of CE practices, little is known about the perspectives and experiences concerning social assessment of businesses actively engaged with CE. Thus, the authors conducted 43 semi-structured interviews with frontrunner companies engaged with CE in Italy and the Netherlands to obtain a better picture on (1) how these firms view the importance of the social dimension as part of the assessment of CE practices, (2) what the barriers to conducting social assessment are, and (3) whether they have experience with assessing social sustainability aspects within their companies and supply chains. Through a thematic analysis, it was found that most companies deem the social dimension to be relevant to CE assessment and either consider it an integral part of CE or of sustainability. However, a majority of the companies did not conduct any type of social assessment. Most companies which implemented assessments did so in a qualitative manner or used industry-based sustainability indicator frameworks. Notwithstanding the prevalence of social life cycle assessment in the academic realm, almost all interviewees mentioned barriers to its application related to its complexity and the lack of a standardised approach.} -} - -@article{walkerResponseDiversitySustainability2023, - title = {Response Diversity as a Sustainability Strategy}, - author = {Walker, Brian and Cr{\'e}pin, Anne-Sophie and Nystr{\"o}m, Magnus and Anderies, John M. and Andersson, Erik and Elmqvist, Thomas and Queiroz, Cibele and Barrett, Scott and Bennett, Elena and Cardenas, Juan Camilo and Carpenter, Stephen R. and Chapin, F. Stuart and {de Zeeuw}, Aart and Fischer, Joern and Folke, Carl and Levin, Simon and Nyborg, Karine and Polasky, Stephen and Segerson, Kathleen and Seto, Karen C. and Scheffer, Marten and Shogren, Jason F. and Tavoni, Alessandro and {van den Bergh}, Jeroen and Weber, Elke U. and Vincent, Jeffrey R.}, - year = {2023}, - month = jan, - journal = {Nature Sustainability}, - pages = {1--9}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-022-01048-7}, - urldate = {2023-02-09}, - abstract = {Financial advisers recommend a diverse portfolio to respond to market fluctuations across sectors. Similarly, nature has evolved a diverse portfolio of species to maintain ecosystem function amid environmental fluctuations. In urban planning, public health, transport and communications, food production, and other domains, however, this feature often seems ignored. As we enter an era of unprecedented turbulence at the planetary level, we argue that ample responses to this new reality \textemdash{} that is, response diversity \textemdash{} can no longer be taken for granted and must be actively designed and managed. We describe here what response diversity is, how it is expressed and how it can be enhanced and lost.}, - copyright = {2023 Springer Nature Limited}, - langid = {english}, - keywords = {Agriculture,Biodiversity,Business and industry,Interdisciplinary studies,Sustainability}, - file = {/Users/fabio/Zotero/storage/JSG8S3DB/Walker et al. - 2023 - Response diversity as a sustainability strategy.pdf} -} - -@article{wallaceClassificationEcosystemServices2007, - title = {Classification of Ecosystem Services: {{Problems}} and Solutions}, - author = {Wallace, Ken J.}, - year = {2007}, - month = oct, - journal = {Biological Conservation}, - volume = {139}, - number = {3-4}, - pages = {235--246}, - publisher = {{Elsevier}}, - issn = {00063207}, - doi = {10.1016/j.biocon.2007.07.015}, - urldate = {2021-04-23}, - abstract = {Ecosystem values are not well accounted for in decisions concerning natural resources. In this context, the concept of ecosystem services offers an important opportunity to develop a framework to underpin the wise use of biodiversity and other natural resources. Although the merit of using ecosystem services to frame biodiversity evaluations has been documented, the classification systems employed mix processes (means) for achieving services and the services themselves (ends) within the same classification category. This limits their contribution to decisions concerning biodiversity. Ambiguity in the definitions of key terms - such as ecosystem processes, functions and services - exacerbates this situation. After clarifying definitions and discussing the basic components of an effective typology, this paper develops a classification of ecosystem services that provides a framework for decisions in natural resource management. However, further work is still required to resolve particular issues, such as the classification of socio-cultural services. Although science can contribute to effective decisions by clearly classifying services and describing their links to processes, final decisions concerning biodiversity and other natural resources are inevitably socio-political, and embedded within a particular cultural context. Crown Copyright \textcopyright{} 2007.}, - keywords = {Biodiversity planning,Decision-making,Ecosystem services,Natural resource management,Values} -} - -@article{Wallner1996, - title = {Islands of Sustainability: {{A}} Bottom-up Approach towards Sustainable Development}, - author = {Wallner, H. P. and Narodoslawsky, M. and Moser, F.}, - year = {1996}, - journal = {Environment and Planning A}, - volume = {28}, - number = {10}, - pages = {1763--1778}, - issn = {0308518X}, - doi = {10.1068/a281763}, - abstract = {In this paper we introduce the concept of 'islands of sustainability'. The basic assumption is that the development towards sustainability can be introduced starting from sustainable 'islands'. An island is an area where sustainability is reached at a local or regional level. Exchange activities within the regional network and with the environment are key points in creating an island of sustainability. One of the main theses is that the concept of sustainability addresses not only the interactions between the economic system and the ecosphere, but also structural aspects of the anthropogenic system, such as the economic diversity and economic connectedness. Hence, sustainability is linked to the complexity of the regional network. In order to attain sustainability the intensity, the speed, and comprehensiveness of internal and external interactions, as well as the connectedness of the regional network, have to be changed. In this paper we examine the regional system. The structure, elements, interactions, and boundaries of the regional system are discussed in detail. This systems analysis is the basis of the definition of islands of sustainability. Once we reach sustainable development within islands, we then turn our discussion to the change of the whole unsustainable economic system. Islands of sustainability can be seen as 'trouble-makers' which infiltrate the whole unsustainable system and act as cells of development.}, - file = {/Users/fabio/Zotero/storage/UP4EFP52/wallner1996.pdf} -} - -@article{Walsh2020, - title = {The Role of Science, Technology and Innovation in the {{UN}} 2030 Agenda}, - author = {Walsh, P.P. and Murphy, E. and Horan, D.}, - year = {2020}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {154}, - pages = {119957}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.119957} -} - -@article{Walton2019, - title = {Developing a Theory of Plausibility in Scenario Building: {{Designing}} Plausible Scenarios}, - author = {Walton, Sara and O'Kane, Paula and Ruwhiu, Diane}, - year = {2019}, - month = aug, - journal = {Futures}, - volume = {111}, - pages = {42--56}, - publisher = {{Elsevier Ltd}}, - issn = {00163287}, - doi = {10.1016/j.futures.2019.03.002}, - urldate = {2020-05-10}, - abstract = {Scenario planning is used by organizations and institutions to help understand futures, expand imaginations and to sensitize for changing business environments. The scenario planning process can help deal with uncertainties in an increasingly dynamic environment, particularly if they are perceived as plausible. To explore the practicalities of developing plausible scenarios we utilised a case study, and involved key stakeholders, to investigate the `Future of Work' in Dunedin, Aotearoa, New Zealand. Using sensemaking analysis we show how participants utilized their individual frames of reference to interpret how plausible the scenarios were, while also constructing cues to prospectively `make sense'. Therefore, we contribute both to understanding how to build plausibility into scenario planning and how participants make sense of future scenarios. We propose a model, based on the sensemaking concepts of frames and cues, that supports the construction of plausible scenarios. We conclude that designing plausible scenarios, as a prospective sensemaking device, is a powerful way to encourage discussion about futures and to understand the consequences of today's activities on tomorrow's realities. Understanding how to design scenarios that are perceived as plausible from a stakeholder's perspective is crucial for building understandings of future events.}, - keywords = {Business environment,Future of work,Plausibility,Prospective sensemaking,Scenarios,Sensemaking} -} - -@article{Wang2006, - title = {A Model Research for Prototype Warp Deformation in the {{FDM}} Process}, - author = {Wang, Tian-Ming and Xi, Jun-Tong and Jin, Ye}, - year = {2006}, - month = apr, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {33}, - number = {11-12}, - pages = {1087--1096}, - issn = {0268-3768}, - doi = {10.1007/s00170-006-0556-9}, - urldate = {2013-03-24}, - keywords = {fused deposition,modeling,rapid prototyping,thermal stress,warp deformation}, - file = {/Users/fabio/Zotero/storage/HXLNT6T3/A model research for prototype warp deformation in the FDM process.pdf} -} - -@article{Wang2018, - title = {An Approach to Identify Emergent Topics of Technological Convergence: {{A}} Case Study for {{3D}} Printing}, - author = {Wang, Zhinan and Porter, Alan L. and Wang, Xuefeng and Carley, Stephen}, - year = {2018}, - journal = {Technological Forecasting and Social Change}, - number = {December}, - pages = {1--10}, - publisher = {{Elsevier}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2018.12.015}, - abstract = {Technological Convergence (TC) reflects developmental processes that overlap different technological fields. It holds promise to yield outcomes that exceed the sum of its subparts. Measuring emergence for a TC environment can inform innovation management. This paper suggests a novel approach to identify Emergent Topics (ETopics) of the TC environment within a target technology domain using patent information. A non-TC environment is constructed as a comparison group. First, TC is operationalized as a co-classification of a given patent into multiple 4-digit IPC codes ({$\geq$}2-IPC). We take a set of patents and parse those into three sub-datasets based on the number of IPC codes assigned 1-IPC (Non-TC), 2-IPC and {$\geq$}3-IPC. Second, a method is applied to identify emergent terms (ETs) and calculate emergence score for each term in each sub-dataset. Finally, we cluster those ETs using Principal Components Analysis (PCA) to generate a factor map with ETopics. A convergent domain \textendash{} 3D printing \textendash{} is selected to present the illustrative results. Results affirm that for 3D printing, emergent topics in TC patents are distinctly different from those in non-TC patents. The number of ETs in the TC environment is increasing annually.}, - keywords = {3D printing,Emergent Terms (ETs),Emergent Topics (ETopics),International Patent Classification (IPC),Technological Convergence (TC)}, - file = {/Users/fabio/Zotero/storage/ZGK6TBFV/An approach to identify emergent topics of technological convergence A case study for 3D printing.pdf} -} - -@article{Wang2018a, - title = {Can the Melt Flow Index Be Used to Predict the Success of Fused Deposition Modelling of Commercial Poly(Lactic Acid) Filaments into {{3D}} Printed Materials?}, - author = {Wang, Sisi and Capoen, Lore and D'hooge, Dagmar R. and Cardon, Ludwig}, - year = {2018}, - journal = {Plastics, Rubber and Composites}, - volume = {47}, - number = {1}, - pages = {9--16}, - publisher = {{Taylor \& Francis}}, - issn = {17432898}, - doi = {10.1080/14658011.2017.1397308}, - abstract = {The melt flow index (MFI) of seven commercial poly(lactic acid) (PLA) grades is investigated in view of 3D printing quality. A threshold value of 10 g (10 min)-1 (2.16 kg; ISO 1133) is put forward for a successful printing (190\textendash 220\textdegree C), enabling a fast and practical screening of PLA materials. It is however shown that a sole focus on MFI is insufficient, as the plasticiser type and crystallinity also play a role after the polymer melt deposition. The latter is supported by scanning electron micromorphology and differential scanning calorimetry measurements. In particular, blending with poly(hydroxyl butyrate) (PHB; 20 m\%) allows to control both MFI and crystallinity without the need for annealing.}, - keywords = {Fused deposition modelling,melt flow index,micromorphology,poly(lactic acid),printability}, - file = {/Users/fabio/Zotero/storage/BSLNMPSH/Can the melt flow index be used to predict the success of fused deposition modelling of commercial poly lactic acid filaments into 3D printed.pdf} -} - -@article{Wang2019, - title = {Review of Additive Manufacturing Methods for High-Performance Ceramic Materials}, - author = {Wang, Jia-Chang and Dommati, Hitesh and Hsieh, Sheng-Jen}, - year = {2019}, - month = aug, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {103}, - number = {5-8}, - pages = {2627--2647}, - issn = {0268-3768}, - doi = {10.1007/s00170-019-03669-3} -} - -@article{Wang2019a, - title = {Multi-Attribute Decision Making on Reverse Logistics Based on {{DEA-TOPSIS}}: {{A}} Study of the {{Shanghai End-of-life}} Vehicles Industry}, - author = {Wang, Zhiguo and Hao, Hao and Gao, Feng and Zhang, Qian and Zhang, Ji and Zhou, Yanjun}, - year = {2019}, - month = mar, - journal = {Journal of Cleaner Production}, - volume = {214}, - pages = {730--737}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.12.329} -} - -@article{Wang2019b, - title = {A Comparative Study on Recycling Amount and Rate of Used Products under Different Regulatory Scenarios}, - author = {Wang, Mingyue and Li, Yingming and Li, Mengming and Wan, Ling and Miao, Lu and Wang, Xiaowan}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {1153--1169}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.320}, - urldate = {2020-05-21}, - abstract = {Used products recycling is a cleaner and greener mode of production. The multiple uncertainties in the process of recycling and reproduction require appropriate government regulation. On the basis of classical game theory, the positive influence of cooperative social reputation is also considered, and a dynamic Stackelberg game model dominated by manufacturers is constructed. The comparison of the total market demand for products, the number of used products recycled and the recycle rate of used products can be obtained under four different scenarios. In addition to the business as usual (BAU) scenario, any kind of scenarios represent the corresponding regulatory policy. The results show that, with respect to the BAU scenario, the penalty scenario and the reward-penalty scenario have a positive correlation with the recycling rate of used products, while the reward scenario has a negative correlation with the recycling rate. The impact of the reward-penalty scenario on the total market demand for products, cooperative social reputation and the number of used products recycled is related to the specified recycling rate, set by the government. In the end, the validity of the model is verified through numerical simulation and the sensitivity of the relevant parameters under the reward-penalty scenario are analysed. The conclusion of this paper is of great significance for designing precise policies to promote recycling of used products.}, - keywords = {Dynamic stackelberg model,Government regulation,Management performance,Used products recycling} -} - -@article{Wang2019c, - ids = {wang2019}, - title = {Big Data: {{New}} Tend to Sustainable Consumption Research}, - author = {Wang, Zhaohua and Xue, Mengtian and Wang, Y. and Song, M. and Li, Shanjun and Daziano, Ricardo A. and Wang, Bo and Ma, Guanhua and Chen, Ke and Li, Xiangtao and Zhang, Bin}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {236}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.330}, - urldate = {2020-05-21}, - abstract = {Growing consumption has brought a series of environmental problems. Sustainable consumption patterns which could meet human needs, improve the quality of lives, and reduce pollutants in the product life cycle emerge and develop. With the development and application of information and network technology, the scale and variety of data are increasing rapidly; advances in data analytics have made the economy, and consumption, quantifiable and visible. At present, many scholars rely on a big-data background and carry out research on sustainable consumption. Therefore, we called for sustainable and consumption papers for special volume of Journal of Cleaner Production (JCLPRO). We received submissions from all over the world and eventually accepted 45. This Special Issue forming a study on sustainable energy consumption, low-carbon transportation, waste recovery and recycling, climate change cost assessment, application and policy modelling for big data and sustainable consumption to promote sustainable development in the fields of energy consumption, low-carbon transportation, waste recovery, and so on. The authors have analysed the problems of pollution and carbon emission in different regions and product production cycles, according to the background of specific regions and enterprises, through data mining, measurement models, and an evaluation index system. Some suggestions are provided for urban construction and enterprise development according to the results.}, - keywords = {Big data,Climate change,Low carbon,Sustainable consumption} -} - -@article{Wang2019d, - title = {Measuring Wellbeing Performance of Carbon Emissions Using Hybrid Measure and Meta-Frontier Techniques: {{Empirical}} Tests for {{G20}} Countries and Implications for {{China}}}, - author = {Wang, Xiaoling and Shao, Qinglong and Nathwani, J. and Zhou, Qian}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117758}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117758}, - urldate = {2020-05-21}, - abstract = {A quantitative measure of performance that integrates national-level carbon emission profiles with key parameters of social and economic wellbeing can provide an effective management tool for policy interventions. This paper constructs non-parametric evaluation and decomposition models using hybrid measure and meta-frontier techniques. The proposed models are employed to estimate the wellbeing performance of carbon emissions (WPCE) and identify the sources of WPCE inefficiency. Empirical analyses based on the Group 20 (G20) countries for the 2000\textendash 2015 period shows the worst performance is in the BRICS country group (i.e. Brazil, Russia, India, China, and South Africa) \textendash{} known for rapid growth \textendash{} whereas the developed and the developing economies of the G20 group show positive trajectories of performance. As for China, its performance measure of WPCE was the lowest among the G20 indicating significant potential for further improvement. The analysis also highlights the role of managerial failure as the primary driver of inefficiency, more important than technological inefficiency in explaining efficiency loss within the G20 countries. This critical finding \textendash{} the relevance and importance of managerial capability \textendash{} suggests the need for a high level of attention to governance and managerial capacity to ensure continued improvements in performance on carbon emissions and human wellbeing. A lesson to be drawn from this study is that China's policies to promote a low carbon economy can benefit from increased priority given to low-carbon technological innovation for the energy system transition and enhancement of environmental governance and managerial capacity to achieve a long-term sustainability.}, - keywords = {Group 20 (G20),meta-Frontier analysis,Technical heterogeneity,Undesirable hybrid DEA,Wellbeing performance of carbon emissions (WPCE)} -} - -@article{Wang2019e, - title = {Decoupling Economic Growth from Carbon Emissions Growth in the {{United States}}: {{The}} Role of Research and Development}, - author = {Wang, Qiang and Wang, Shasha}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {234}, - pages = {702--713}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.174}, - urldate = {2020-05-12}, - abstract = {The United States has achieved economic growth compatible with carbon reduction since 2007. This work is addressed to understand the eight effects, especially effects related to research \& development (R\&D) on the decoupling economic growth from carbon emission through a decomposition technique and a decoupling effort model. The results of sector analysis show that the changes of carbon emission in industry sector and transportation sector were dominant contributor and inhibitor to the drop of carbon emission, respectively. The decomposition results indicate that energy intensity was the leading contributor to the drop of carbon emission, followed by R\&D intensity, sectoral carbon intensity, R\&D efficiency; whereas economic scale was the primary inhibitor to the drop of carbon emission, followed by investment intensity, population size and sectoral energy structure. The results of decoupling efforts analysis uncover that energy intensity, R\&D intensity, R\&D efficiency and sectoral carbon intensity contributed to decoupling economic growth from carbon emission, whereas investment intensity, population size and sectoral energy structure did not contribute to the decoupling. Finally, some policy implications are proposed.}, - keywords = {Decomposition analysis,Decoupling effort,Economic growth compatible with carbon reduction,Effects of research and development,The United States} -} - -@article{Wang2020, - title = {Future Improvements on Performance of an {{EU}} Landfill Directive Driven Municipal Solid Waste Management for a City in {{England}}}, - author = {Wang, Dan and Tang, Yu-Ting and Long, Gavin and Higgitt, David and He, Jun and Robinson, Darren}, - year = {2020}, - month = feb, - journal = {Waste Management}, - volume = {102}, - pages = {452--463}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.11.009} -} - -@article{Wang2020a, - title = {Structure of the Global Plastic Waste Trade Network and the Impact of {{China}}'s Import {{Ban}}}, - author = {Wang, Chao and Zhao, Longfeng and Lim, Ming K and Chen, Wei-Qiang and Sutherland, John W.}, - year = {2020}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {153}, - pages = {104591}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104591}, - file = {/Users/fabio/Zotero/storage/VAZ3QD8V/Structure of the global plastic waste trade network and the impact of China’s import Ban.pdf} -} - -@article{Wang2020b, - title = {A Deeper Investigation of Different Types of Core Users and Their Contributions for Sustainable Innovation in a Company-Hosted Online Co-Creation Community}, - author = {Wang, Yu and Li, Cheng and Zhang, Dongsong and Wu, Jiacong and Liu, Yang}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {256}, - pages = {120397}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120397} -} - -@article{Wang2020c, - title = {Sustainable Development at Higher Education in {{China}}: {{A}} Comparative Study of Students' Perception in Public and Private Universities}, - author = {Wang, Jiawen and Yang, Minghui and Maresova, Petra}, - year = {2020}, - month = mar, - journal = {Sustainability (Switzerland)}, - volume = {12}, - number = {6}, - publisher = {{MDPI AG}}, - issn = {20711050}, - doi = {10.3390/su12062158}, - urldate = {2020-05-21}, - abstract = {This research is implemented in the backdrop of the increasing number of private universities established in China over the last decade, and a growing public concern of sustainable development. The private university has a different reputation and source of funding compared with the public one, leading to different perception and practices toward sustainable development. Yet, none of past studies have investigated into public and private universities in the Chinese context, making this study fill this gap through comparing students' perception in Zhongkai University of Agriculture and Engineering (a public university) and Guangzhou College of South China University of Technology (a private university). By using the five-point Likert scale questionnaire, 393 students from the public university and 347 students from the private university participated in the survey. The results reveal that students have greatest concern with sustainability commitment and their university's role for promoting sustainable development, and have least concern with sustainability curricula and research. Compared with students from the public university, students in the private one more often agree on the importance of sustainable development, and have a higher level of perception about commitment, knowledge, attitudes, and practices toward sustainability. The study findings assert that the higher level of perception from private university's students is due to active campus sustainability engagement and positive stakeholder relationship managed by university management. The study implies that higher education needs to decentralize sustainable plans and decision-making to students, staff, and faculty, and public universities need to incorporate more sustainability-related context into curriculum and academic project.}, - keywords = {Bottom-up approach,Higher education institutions,Private university,Public university,Students,Sustainable development}, - file = {/Users/fabio/Zotero/storage/K96YEKBM/full-text.pdf} -} - -@article{Wang2020d, - title = {Key Factors Influencing Public Awareness of Household Solid Waste Recycling in Urban Areas of {{China}}: {{A}} Case Study}, - author = {Wang, Hui and Liu, Xiao and Wang, Ning and Zhang, Kun and Wang, Fengchuan and Zhang, Shuping and Wang, Renqing and Zheng, Peiming and Matsushita, Michinari}, - year = {2020}, - month = jul, - journal = {Resources, Conservation and Recycling}, - volume = {158}, - pages = {104813}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104813}, - urldate = {2020-05-08}, - abstract = {With rapid economic development, population growth, and urbanization, household solid waste (HSW) causes significant environmental pollution and health threats to residents. As the sustainable waste management, HSW recycling is an urgent requirement in China and other countries. However, public awareness of HSW recycling and its influencing factors were seldom systematically analyzed in China. In present study, an on-site face-to-face questionnaire survey was the main research tool. We investigate public awareness of HSW recycling in typical Chinese cities, including public behavior, recycling knowledge, and public willingness to participate. The factors influencing public awareness were also explored. We found that public awareness was inadequate regarding HSW treatment behavior and recycling knowledge. Age is the most important sociodemographic factor influencing the public awareness of HSW recycling. White collar, residents with higher educational attainment, and those aged 20\textendash 50 years displayed less environmentally responsible behavior with regard to HSW treatment. Manual workers, those with lower educational attainment, those with higher monthly income, and older people tend to have poorer HSW recycling knowledge. White collar workers, those with higher educational attainment, and those with lower monthly income were less willing to participate in HSW recycling. Accordingly, measurements conducted amongst specific demographic categories are proposed to improve public awareness of HSW recycling. The scientific information provided by this study may contribute to HSW recycling especially from a public awareness perspective.}, - keywords = {Household solid waste,Public awareness,Questionnaire survey,Recycling scheme,Waste management} -} - -@article{Wang2020e, - title = {Public Perception Matters: {{Individual}} Waste Sorting in {{Chinese}} Communities}, - author = {Wang, Yan and Hao, Feng}, - year = {2020}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {159}, - pages = {104860}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104860}, - urldate = {2020-05-08}, - abstract = {Individual waste sorting is necessary for effective, efficient waste management. Despite active government interventions, waste sorting has achieved limited success in China. Previous research provides contradictory theories and mixed evidence of the relationship between perceived environmental governance and individual waste sorting behavior. Some researchers argue that perceived environmental governance enhances individual engagement by offering a supportive atmosphere, whereas the crowding out thesis suggests that it undermines intrinsic motivation and suppresses participation. This study suggests that the controversy is partially attributed to people's varying expectations for central and local governments. Multivariate analyses of nationally representative data in China show that a positive evaluation of local government motivates individuals' sorting behavior, whereas the perceived effective environmental governance of the central government decreases individual engagement, net of demographic and socioeconomic factors. Additionally, people in danwei and affordable housing communities who perceive the central government's environmental governance to be effective are more likely to sort waste. Institutional trust and the involvement of local actors may lead to differential outcomes. These findings suggest that waste sorting results from systematic evaluations of both individual preferences and institutional settings, and effective environmental governance requires more nuanced measures to evoke intrinsic motivation, preferably at the community level.}, - keywords = {Central government,Local government,Motivation crowding theory,Public perception,Waste sorting behavior} -} - -@article{Wang2020f, - title = {Mapping Technological Trajectories and Exploring Knowledge Sources: {{A}} Case Study of {{3D}} Printing Technologies}, - author = {Wang, Lili and Jiang, Shan and Zhang, Shiyun}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120251}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120251}, - urldate = {2020-09-01}, - file = {/Users/fabio/Zotero/storage/D8RBI9RY/full-text.pdf} -} - -@article{Wang2020g, - title = {From Intention to Behavior: {{Comprehending}} Residents' Waste Sorting Intention and Behavior Formation Process}, - author = {Wang, Shanyong and Wang, Jinpeng and Yang, Shu and Li, Jun and Zhou, Kaile}, - year = {2020}, - month = jul, - journal = {Waste Management}, - volume = {113}, - pages = {41--50}, - publisher = {{Elsevier Ltd}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.05.031}, - urldate = {2020-06-07}, - abstract = {Waste sorting is essential to address the current predicament of waste management. Though it is important, insufficient attention has been paid to explore residents' waste sorting intention and behavior and understand its formation process. To narrow the research gap, this research built a theoretical research model by adding personal moral norms and waste sorting knowledge into the theory of planned behavior to explicate residents' waste sorting intention and behavior formation process. Meanwhile, given the discrepancy between waste sorting intention and actual behavior, this research also explored the effect of external conditions, such as incentive measures, on this discrepancy. Based on survey data from 397 Chinese residents, this research found that attitudes, subjective norms, perceived behavioral control, personal moral norms and waste sorting knowledge were directly and significantly related to residents' waste sorting intention. Waste sorting knowledge also had an indirect influence on residents' waste sorting intention through attitudes and perceived behavioral control. Additionally, this research corroborated the discrepancy between waste sorting intention and behavior, and suggested that the link between intention and behavior was contingent on incentive measures. Incentive measures strengthened the effect of intention on behavior. This research is useful for understanding residents' waste sorting intention and behavior and valuable for encouraging residents to sort waste in their daily lives.}, - keywords = {Incentive measures,Personal moral norms,Theory of planned behavior,Waste sorting behavior,Waste sorting knowledge}, - file = {/Users/fabio/Zotero/storage/AS9DGLM9/From intention to behavior- Comprehending residents’ waste sorting intention and behavior formation process.pdf;/Users/fabio/Zotero/storage/TCH49S6H/From intention to behavior- Comprehending residents’ waste sorting intention and behavior formation process.pdf} -} - -@article{Wang2020h, - title = {Effects of Fused Deposition Modeling Process Parameters on Tensile, Dynamic Mechanical Properties of {{3D}} Printed Polylactic Acid Materials}, - author = {Wang, Shuheng and Ma, Yongbin and Deng, Zichen and Zhang, Sen and Cai, Jiaxin}, - year = {2020}, - month = jun, - journal = {Polymer Testing}, - volume = {86}, - pages = {106483}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2020.106483}, - urldate = {2021-01-15}, - abstract = {Fused deposition modeling (FDM) is an important process among the available additive manufacturing technologies in various industries. Although there exists many works investigating the effects of FDM process parameters on the mechanical properties of printed materials, there are still several points need to be studied. One is the effects of process parameters on the dynamic mechanical properties of FDM-printed materials, especially in environments where the temperature often changes. The other is the mechanism by which process parameters affect the mechanical properties of printed materials. Aiming at these two points, uniaxial tensile tests and dynamic mechanical analysis are carried out respectively to characterize the tensile properties and dynamic mechanical properties of FDM-printed PLA materials under different FDM process parameters, namely printing angle, layer thickness, fill rate and nozzle temperature. Based on the experimental results explanations are given for the influence of the FDM process parameters on the mechanical properties of the printed materials.}, - keywords = {Dynamic mechanical properties,Fused deposition modeling,Process parameters,Tensile properties}, - file = {/Users/fabio/Zotero/storage/6BG37R8Z/full-text.pdf} -} - -@article{wangAdditiveManufacturingSustainable2021, - title = {Additive Manufacturing Is Sustainable Technology: Citespace Based Bibliometric Investigations of Fused Deposition Modeling Approach}, - author = {Wang, Yanen and Mushtaq, Ray Tahir and Ahmed, Ammar and Ahmed, Ammar and Rehman, Mudassar and Rehman, Mudassar and Khan, Aqib Mashood and Sharma, Shubham and Ishfaq, Dr Kashif and Ali, Haider and Gueye, Thierno}, - year = {2021}, - month = oct, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-05-2021-0112}, - urldate = {2021-11-07}, - abstract = {Purpose: Additive manufacturing (AM) technology has a huge influence on the real world because of its ability to manufacture massively complicated geometrics. The purpose of this study is to use CiteSpace (CS) visual analysis to identify fused deposition modeling (FDM) research and development patterns to guide researchers to decide future research and provide a framework for corporations and organizations to prepare for the development in the rapid prototyping industry. Three-dimensional printing (3DP) is defined to budget minimize manufactured input and output for aviation and the medical product industrial sectors. 3DP has implemented its potential in the Coronavirus Disease of 2019 (COVID-19) reaction. Design/methodology/approach: First, 396 original publications were extracted from the web of science (WOS) with the comprehensive list and did scientometrics analysis in CS software. The parameters are specified in CS including the span (from 2011 to 2019, one year slice for the co-authorship and the co-accordance analysis), visualization (show the merged networks), specific criteria for selection (top 20\%), node form (author, organization, region, reference cited; cited author, journal and keywords) and pruning (pathfinder and slicing network). Finally, correlating data was studied and showed the results of the visualization study of FDM research were shown. Findings: The framework of FDM information is beginning to take shape. About hot research topics, there are ``Morphology,'' ``Tensile Property by making Blends,'' ``Use of Carbon nanotube in 3DP'' and ``Topology optimization.'' Regarding the latest research frontiers of FDM printing, there are ``Fused Filament Fabrication,'' ``AM,'' in FDM printing. Where ``Post-processing'' and ``environmental impact'' are the research hotspots in FDM printing. These research results can provide insight into FDM printing and useful information to consider the existing studies and developments in FDM researchers' analysis. Research limitations/implications: Despite some important obtained results through FDM-related publications' visualization, some deficiencies remain in this research. With {$>$}99\% of articles written in English, the input data for CS was all downloaded from WOS databases, resulting in a language bias of papers in other languages and neglecting other data sources. Although, there are several challenges being faced by the FDM that limit its wide variety of applications. However, the significance of the current work concerning the technical and engineering prospects is discussed herein. Originality/value: First, the novelty of this work lies in describing the FDM approach in a Scientometric way. In Scientometric investigation, leading writers, organizations, keywords, hot research and emerging knowledge points were explained. Second, this research has thoroughly and comprehensively examined the useful sustainability effects, i.e. economic sustainability, energy-based sustainability, environmental sustainability, of 3DP in industrial development in qualitative and quantitative aspects by 2025 from a global viewpoint. Third, this work also described the practical significance of FDM based on 3DP since COVID-19. 3DP has stepped up as a vital technology to support improved healthcare and other general response to emergency situations.}, - keywords = {3D Printing,Additive manufacturing,CiteSpace,Fused deposition modeling,Manufacturability and machinability,Research hotspots,Scientometric analysis,Sustainability} -} - -@article{wangColor3DPrinting2021, - title = {Color {{3D}} Printing of Pulped {{Yam}} Utilizing a Natural {{pH}} Sensitive Pigment}, - author = {Wang, Ruiyuan and Li, Zhihua and Shi, Jiyong and Holmes, Melvin and Wang, Xinyu and Zhang, Junjun and Zhai, Xiaodong and Huang, Xiaowei and Zou, Xiaobo}, - year = {2021}, - month = jun, - journal = {Additive Manufacturing}, - pages = {102062}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102062}, - urldate = {2021-06-18} -} - -@article{wangCriticalMineralsSustainability2023, - title = {Critical Minerals for Sustainability:~{{More}} Haste, Less Speed}, - shorttitle = {Critical Minerals for Sustainability}, - author = {Wang, Yao and Tzachor, Asaf and Wang, Heming and Chen, Wei-Qiang}, - year = {2023}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {198}, - pages = {107181}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107181}, - urldate = {2023-08-31}, - file = {/Users/fabio/Zotero/storage/G86CWVAC/S0921344923003166.html} -} - -@article{wangCriticalReviewGlobal2021, - title = {Critical Review of Global Plastics Stock and Flow Data}, - author = {Wang, Chunyan and Liu, Yi and Chen, Wei Qiang and Zhu, Bing and Qu, Shen and Xu, Ming}, - year = {2021}, - month = oct, - journal = {Journal of Industrial Ecology}, - volume = {25}, - number = {5}, - pages = {1300--1317}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.13125}, - urldate = {2022-01-25}, - abstract = {The production, consumption, and waste of plastics have been rapidly growing worldwide in the last decades. A variety of data are needed to characterize plastics stocks and flows across space, time, and life cycle to derive insights for developing strategies to address various sustainability challenges from plastics and plastics waste. Here we review data sources on plastics stocks and flows to identify data gaps and research needs. We categorize the reviewed data sources by life cycle stages of plastics including material production, semi-manufacturing, manufacturing, additives, consumption, in-use stock, end-of-life, waste treatment, and trade. We identify four data gaps in these existing data for characterizing plastics stocks and flows, including inconsistent classification, missing data, conflicting data, and inexplicit data for plastics products and waste. These data gaps represent critical research needs including common platform for data sharing, standard methods for data reconciliation and estimation, consistent data collection and reporting, and new approaches for data collection and curation. This review establishes the state-of-the-art of plastics stock and flow data and develops a roadmap for a high-quality, comprehensive characterization of plastics stocks and flows to develop management strategies to address the sustainability challenges of plastics production, consumption, waste, and pollution.}, - keywords = {data,industrial ecology,plastics,plastics waste,societal metabolism,stock and flow}, - file = {/Users/fabio/Zotero/storage/7CDQW27K/full-text.pdf} -} - -@article{wangEcologicalProtectionRestoration2021, - title = {Is Ecological Protection and Restoration of Full-Array Ecosystems Conducive to the Carbon Balance? {{A}} Case Study of {{Hubei Province}}, {{China}}}, - author = {Wang, Ying and Zhang, Hongwei and Zhang, Chen and Liu, Cong}, - year = {2021}, - month = may, - journal = {Technological Forecasting and Social Change}, - volume = {166}, - pages = {120578}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120578}, - urldate = {2021-02-14}, - abstract = {The ecological protection and restoration of full-array ecosystems (EPRFE) is crucial for improving ecological environments in many respects. However, whether EPRFE can contribute to the carbon balance in terms of reducing carbon emissions and increasing carbon sequestration remains unclear. In this study, an indicator system is conducted to assess EPRFE levels, a net carbon emission accounting method is applied to measure carbon balance, and a coupling coordination model is employed to explore the relationship between EPRFE levels and net carbon emissions of cities in Hubei Province from 2013 to 2017. The results showed that Jingzhou and Jingmen achieved high EPRFE levels, whereas Shennongjia and Ezhou exhibited relatively low EPRFE levels. Moreover, the Wuhan Urban Agglomeration achieved higher net carbon emissions than western Hubei. Overall, EPRFE projects had positive effects on reducing net carbon emissions. The coupling degree between EPRFE levels and net carbon emissions was significantly high (0.85); however, the coordination degree was moderate (0.68) and needs further improvement. The results of this study can be an effective reference for improving EPRFE management strategies through adaptive environmental assessment and management to achieve low-carbon development.}, - keywords = {Ecological protection,Ecological restoration,Full-array ecosystems,Hubei,Net carbon emissions} -} - -@article{wangEcosystemServiceAssessments2022, - title = {Ecosystem Service Assessments across Cascade Levels: Typology and an Evidence Map}, - shorttitle = {Ecosystem Service Assessments across Cascade Levels}, - author = {Wang, Zhuangzhuang and Fu, Bojie and Zhang, Liwei and Wu, Xutong and Li, Yingjie}, - year = {2022}, - month = oct, - journal = {Ecosystem Services}, - volume = {57}, - pages = {101472}, - issn = {2212-0416}, - doi = {10.1016/j.ecoser.2022.101472}, - urldate = {2022-09-18}, - abstract = {The ecosystem service (ES) cascade framework describes the process by which benefits from ecosystems are delivered to human society. In the recent decade, there has been a growing body of studies on ES mapping and assessment at multiple cascade levels. However, the terms and concepts used for characterizing ES cascade components differ widely across studies. Herein we present an evidence map for these studies and aim to reveal their similarities and differences and guide future research. First, we propose a concise and operational version of the ES cascade framework with three key components \textendash{} supply, flow, and demand \textendash{} to clarify and standardize these components. Then, we categorize related studies into three categories: supply-demand (Category 1), supply-flow-demand (Category 2), and spatial ES flow (Category 3). These three categories can well represent research on this topic at different levels, with cascade levels ranging from supply-demand to supply-flow-demand, and with research scope ranging from a given region (Category 1\textendash 2) to interregional linkages (Category 3). After establishing these standardized categories, we conducted a literature search, screening, and an evidence mapping. In total, 131 studies were selected and fit into the three proposed research categories (Category 1: 68; Category 2: 28; Category 3: 35). Results showed a growing research interest in ES mapping and assessments over the past decade, as well as the heterogeneous distribution of publications across geographic regions. We demonstrated their similarities and differences in terms of studied ES, research methods for analyzing the relationships between ES components, spatial and temporal scales, and research purposes. The ES research categories proposed in this study provide a meaningful framework for retrospection and improvement in future research design. Such evidence mapping can also help researchers approach a more holistic view of the characteristics of different categories of studies and their respective potentials and challenges, particularly when considering management and policy decisions with different purposes and conditions.}, - langid = {english}, - keywords = {Ecosystem service supply,Ecosystem services cascade,{Flow, and demand},PRISMA,Spatial ES flow}, - file = {/Users/fabio/Zotero/storage/6XL6QC6D/S2212041622000687.html} -} - -@article{wangEngagementFactorsWaste2020, - title = {Engagement Factors for Waste Sorting in {{China}}: {{The}} Mediating Effect of Satisfaction}, - author = {Wang, Qinglin and Long, Xingle and Li, Liang and Kong, Lanlan and Zhu, Xun and Liang, Hui}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {267}, - pages = {122046}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.122046}, - urldate = {2020-05-27}, - abstract = {Factors promoting satisfaction and engagement with waste sorting were investigated. An extended theoretical model was established by integrating the theories of consumer satisfaction and customer engagement, rather than customer loyalty. Full replies to 672 valid questionnaires were obtained from respondents in 31 Chinese provinces. This paper explored how the perceived value of waste sorting, sorting facilities, income, age, and education affect waste sorting satisfaction. This paper also analyzed the effect of satisfaction on engagement in terms of enthusiasm, social interaction, and active participation by region and gender using multiple-group structural equation modeling (SEM). The results revealed perceived value of sorting and good sorting facilities can enhance satisfaction. Satisfaction can enhance enthusiasm, social interaction, and active participation. Education level, income and age would influence satisfaction and three dimensions of engagement: enthusiasm, social interaction and active participation. Waste sorting satisfaction affected enthusiasm, social interaction, active participation to a greater extent in eastern versus middle and western regions of China. It is important to provide market-incentives, such as green points reward, deposit refund, to promote household waste sorting.}, - keywords = {Enthusiasm,Participation,Social interaction,Waste sorting satisfaction} -} - -@article{wangEnvironmentalFateImpacts2020, - title = {Environmental Fate and Impacts of Microplastics in Soil Ecosystems: {{Progress}} and Perspective}, - author = {Wang, Wenfeng and Ge, Jing and Yu, Xiangyang and Li, Hui}, - year = {2020}, - month = mar, - journal = {Science of The Total Environment}, - volume = {708}, - pages = {134841}, - publisher = {{Elsevier}}, - issn = {0048-9697}, - doi = {10.1016/J.SCITOTENV.2019.134841}, - urldate = {2022-01-13}, - abstract = {The wide and intensive application of plastics and their derived products has resulted in global environmental contamination of plastic waste. Large-sized plastic litter can be fragmented into microplastics ({$<$}5 mm), which have attracted increasing concerns from the general public and scientific communities worldwide. Until recently, the majority of microplastics research reported in literatures has been focusing on the aquatic settings, especially the marine environment, while information about microplastics contamination in terrestrial soil systems is highly insufficient. In this paper, we reviewed the latest data regarding the occurrence of microplastics in terrestrial soils and discussed their potential pathways into the soil environment. We also summarized the currently used methodologies for extraction and characterization of microplastics in soil matrices and evaluated their advantages and limitations. Additionally, we assessed the ecotoxicological consequences of microplastics contamination on soil ecosystems, including the effects on soil physiochemical properties, terrestrial plants, soil fauna, and soil microbes. Finally, based on the most current progress summarized in this review, we suggested several directions for future research on microplastics in soil ecosystems.}, - pmid = {31791759}, - keywords = {Analytical techniques,Ecotoxicological effects,Microplastics contamination,Soil ecosystems,Sources} -} - -@article{wangHowProductProcess2020, - title = {How Product and Process Knowledge Enable Consumer Switching to Remanufactured Laptop Computers in Circular Economy}, - author = {Wang, Yacan and Zhu, Quan and Krikke, Harold and Hazen, Benjamin}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120275}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120275}, - urldate = {2020-09-13}, - abstract = {Circular economy initiatives require that consumers become key actors in the supply chain, vice the last node of a linear consumption system. This research examines consumer perceptions regarding remanufactured products, which are a key element of circular economy, by testing how different types of information regarding remanufacturing processes and product knowledge affect consumers' intention to switch from purchasing new to remanufactured products. Using data from 906 Chinese laptop owners, the results of our structural equation modeling show that gaining knowledge about the product history, recapture process, and remarket process positively influences consumers' attitudes towards remanufactured products and subsequently their switching intentions. A high perceived price of new products positively moderates these relationships. Interestingly, more knowledge of the recapture process actually reduces switching intention, even considering new product price levels. Although the tested relationships are statistically significant, the explanatory power of the informational variables is of low practical significance, suggesting that other kinds of information might be more impactful. This study contributes to the discourse on the consumer's role in circular economy by being the first to link remanufacturing-related process information to consumer perceptions of remanufactured products, thereby investigating information asymmetries between consumers and other supply chain actors beyond the retailer.}, - keywords = {Circular economy,Consumer behavior,Information asymmetry,Remanufacturing,Signaling theory,Structural equation modeling} -} - -@article{wangInternetThingsIoT2021, - title = {Internet of {{Things}} ({{IoT}})-{{Enabled}} Accountability in Source Separation of Household Waste for a Circular Economy in {{China}}}, - author = {Wang, Bill and Farooque, Muhammad and Zhong, Ray Y. and Zhang, Abraham and Liu, Yanping}, - year = {2021}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {300}, - pages = {126773}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126773}, - urldate = {2021-04-29}, - abstract = {Source separation is regarded as a best practice for sustainable waste management, which is essential for a transition to a circular economy to recover value from waste. However, its implementation in China has faced many difficulties which are primarily inherent in the public's behaviour towards source separation of household waste. Based on multiple cases of innovative use of the Internet of Things (IoT) technologies in China in recent years, this study establishes the concept of IoT-enabled accountability in household waste source separation by utilising the lens of accountability theory. Moreover, this research advances several propositions on the multiple dimensions of accountability mechanism to influence user behaviours. The study's findings provide guidance to governments, technology providers and waste management organisations on the use of IoT-based technological solutions for sustainable waste management. It stimulates future research on the use of IoT technologies in managing people's behaviour in a range of contexts beyond waste management alone. The study contributes to the growing literature on smart waste management.} -} - -@article{wangLargescaleMaterialExtrusionbased2023, - title = {Large-Scale Material Extrusion-Based Additive Manufacturing of Short Carbon Fibre-Reinforced Silicon Carbide Ceramic Matrix Composite Preforms}, - author = {Wang, Wenqing and Gao, Xiong and Zhang, Lu and Ma, Qingsong and Li, Suwen and Li, Zengchan and Shen, Chujing and Wang, Gang and He, Rujie}, - year = {2023}, - month = dec, - journal = {Virtual and Physical Prototyping}, - volume = {18}, - number = {1}, - pages = {e2245801}, - publisher = {{Taylor \& Francis}}, - issn = {1745-2759}, - doi = {10.1080/17452759.2023.2245801}, - urldate = {2023-08-31}, - abstract = {Large-scale short carbon fibre-reinforced silicon carbide (Csf/SiC) ceramic matrix composites (CMCs) have important applications in the field of aerospace engineering. This study proposed the use of material extrusion based additive manufacturing to fabricate large-scale Csf/SiC CMC preforms. In this paper, we determined how the key material extrusion parameters, including solid loading, nozzle diameter and layer height impact the stability of the additively manufactured Csf/SiC CMCs. The solid loading significantly influenced the stability of the Csf/SiC CMCs, and the slurry with 50 vol.\% solid loading was better for additive manufacturing. The layer height played a significant role in the void formation in CMCs. It was appropriate for structure retention to set the layer height as 60\textendash 75\% of the nozzle diameter. The effect of angle from vertical on the stability of out-of-plane structure was also investigated. When the angle was over 40o, the out-of-plane structure additively manufactured without supports tended to collapse. Large-scale Csf/SiC CMC preforms with out-of-plane structures were finally successfully fabricated. This study is believed to provide some fundamental understanding for the fabrication of large-scale fibre-reinforced ceramic matrix composites.}, - keywords = {additive manufacturing,ceramic matrix composites,Large-scale,material extrusion}, - file = {/Users/fabio/Zotero/storage/RHTSF5SJ/Wang et al_2023_Large-scale material extrusion-based additive manufacturing of short carbon.pdf} -} - -@article{wangMetaanalysisSustainableSupply2023, - title = {A Meta-Analysis of Sustainable Supply Chain Management and Firm Performance: {{Some}} New Findings on Sustainable Supply Chain Management}, - shorttitle = {A Meta-Analysis of Sustainable Supply Chain Management and Firm Performance}, - author = {Wang, JinFeng and Zhu, Lei and Feng, Lijie and Feng, Jian}, - year = {2023}, - month = apr, - journal = {Sustainable Production and Consumption}, - issn = {2352-5509}, - doi = {10.1016/j.spc.2023.04.015}, - urldate = {2023-05-01}, - abstract = {Industry and academia are increasingly focusing on sustainability as a competitive advantage for firms in the supply chain. Despite the increasing research on sustainable supply chain management (SSCM), the empirical results show a negative and positive relationship with firm performance, while the performance aspect pays less attention to the innovation dimension. Hence, it is necessary to synthesize previous studies to extend the theoretical framework of SSCM and firm performance and to analyze the effects of potential moderating variables on the relationship between SSCM and firm performance. To do this, we conducted a meta-analysis of 42,461 observations from 128 independent samples in 158 empirical studies. The results indicate that SSCM not only improves operational, economic, environmental and social performance, but also enables companies to innovate. In addition, the downstream SSCM contributes the most to firm performance, followed by the internal SSCM, while the upstream SSCM contributes the least. Interestingly, a journal reputation can affect the SSCM-firm performance relationship. We not only extend the framework of SSCM and firm performance, but also combine SSCM with the innovation dimension for the first time. Meanwhile, our results help managers clarify how to make trade-offs with SSCM practices.}, - langid = {english}, - keywords = {Firm performance,meta-analysis,Supply chain management,Sustainable development,Sustainable supply chain management}, - file = {/Users/fabio/Zotero/storage/ILLLILZ4/Wang et al_2023_A meta-analysis of sustainable supply chain management and firm performance.pdf;/Users/fabio/Zotero/storage/RVETDDW3/S2352550923000878.html} -} - -@article{wangMicroplasticsSeparationSubsequent2022, - ids = {wang2022c}, - title = {Microplastics Separation and Subsequent Carbonization: {{Synthesis}}, Characterization, and Catalytic Performance of Iron/Carbon Nanocomposite}, - author = {Wang, Chongqing and Huang, Rong and Sun, Ruirui and Yang, Jiapeng and Dionysiou, Dionysios D.}, - year = {2022}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {330}, - pages = {129901}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129901}, - urldate = {2021-12-10}, - keywords = {Carbon nanocomposite,Catalytic degradation,Iron coagulation,Microplastics,Water treatment}, - file = {/Users/fabio/Zotero/storage/NJG68AIL/Wang et al. - 2022 - Microplastics separation and subsequent carbonizat.pdf;/Users/fabio/Zotero/storage/4KEQZHZ2/S0959652621040713.html} -} - -@article{wangMultipleUrbanResilience2023, - ids = {wang2023a}, - title = {Multiple Urban Resilience Evaluation of Resource-Based Cities' Sustainable Transformation Effect}, - author = {Wang, Zongrun and Fu, Haiqin and Zhou, Ling}, - year = {2023}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {191}, - pages = {106912}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.106912}, - urldate = {2023-02-12}, - abstract = {Improving urban resilience is a key goal in the transformation of resource-based cities. This study examines the impact of sustainable development transitions in resource-based cities on urban ecology, economy, infrastructure, and social resilience. We measure the resilience of 285 prefecture-level cities in China by using the entropy weight method. In particular, we estimate the transformation effects of 121 resource-based cities from multiple resilience perspectives. The main empirical results show that all sub-resilience shows an obvious upward trend. Moreover, the economic, social, and infrastructure resilience have a spatial aggregation effect. Transitions towards sustainable development can make significant positive contributions to ecological resilience in resource-based cities, but it can also negatively impact social resilience. Therefore, governments need to address the social issues that can arise during transitions. This study provides a theoretical basis to inform government policy adjustments.}, - langid = {english}, - keywords = {Entropy weight method,Resource-based cities,Sustainable development transformation,Urban resilience}, - file = {/Users/fabio/Zotero/storage/BSK8ZWGQ/Wang et al_2023_Multiple urban resilience evaluation of resource-based cities’ sustainable.pdf;/Users/fabio/Zotero/storage/U9LJ8ZTT/S0921344923000496.html} -} - -@article{wangNumericalAnalysisScrew2019, - title = {Numerical Analysis of Screw Swirling Effects on Fiber Orientation in Large Area Additive Manufacturing Polymer Composite Deposition}, - author = {Wang, Zhaogui and Smith, Douglas E.}, - year = {2019}, - month = nov, - journal = {Composites Part B: Engineering}, - volume = {177}, - pages = {107284}, - publisher = {{Elsevier Ltd}}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2019.107284}, - urldate = {2021-05-20}, - abstract = {Large Area Additive Manufacturing (LAAM) polymer deposition employs a single screw extruder to deliver pelletized feedstock resulting in significantly higher flow rates as compared to conventional filament-based extrusion additive processes. Swirling kinematics in LAAM melt flow that result from the screw rotation generate unique particle alignment patterns within the fiber-filled polymer during deposition processing. This paper investigates the effect of the single screw swirling motion on the resulting fiber orientation in a short fiber polymer composite extrudate. An axisymmetric non-Newtonian viscoelastic flow is simulated with the finite element method, where the flow nearby the extruder screw tip, within the printing nozzle, and a short section of free extrudate compose the flow domain. Fiber orientation tensors within the flow domain are evaluated using the Wang-O'Gara-Tucker Reduced Strain Closure (RSC) fiber orientation diffusion model with the orthotropic fitted closure. The results indicate that swirling kinematics yield a longer flow path for fibers to travel and orientate within the flow domain, yielding orientation tensor results that are notably different as compared to a non-swirl event. The predicted principal elastic constant from the swirling flow and non-swirling flow models exhibit 21\% difference, and those from the swirling model using the RSC closure shows a good agreement with reported experimental data for a similar material system.}, - keywords = {Large area additive manufacturing,Non-Newtonian viscoelastic flow,Reduced strain closure model,Swirling motion} -} - -@article{wangPerformanceSimulationPolicy2020, - title = {Performance Simulation and Policy Optimization of Waste Polyethylene Terephthalate Bottle Recycling System in {{China}}}, - author = {Wang, Yang and Gu, Yifan and Wu, Yufeng and Zhou, Guangli and Wang, Haibei and Han, Honggui and Chang, Tao}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105014}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105014}, - urldate = {2020-07-20}, - abstract = {Owing to the convenience and price advantages, polyethylene terephthalate (PET) bottles have been widely used in daily life. This leads to a substantial number of waste PET bottles. Because of the lack of corresponding management policies in developing countries, PET bottles have entered the informal collection and recycling sectors in large quantities, causing serious environmental pollution. In China, how to regulate the formal collection and achieve optimal performance of a PET bottle recycling system with policy implementation methods are still being explored. This study constructs a dynamic recycling system of waste PET bottles for the production-consumption, consumption-collection, and collection-recycling subsystems that regulate the formal recycling of PET bottles through policies. The deposit-refund system, mandatory policy and tax refund system were used as the standard recycling policy in a simulation, and comprehensive performance changes were compared before and after the policy simulation. The results indicate that the comprehensive performance (basic scenario) of the PET bottle recycling system is an average of 5.42 billion CNY. With the policy mix scenario, it reached to 6.51 billion CNY, and the formal collection rate increased to 55.8\%. Compared with the basic scenario, the comprehensive performance of the policy mix scheme increased by 20\%, which is beneficial to the operations of the formal collection and recycling sectors and increases the production vitality of the formal PET recycling industry.}, - keywords = {Comprehensive performance evaluation,PET bottle,Policy simulation,Recycling system,System dynamics} -} - -@article{wangPlasticBagUsage2021, - title = {Plastic Bag Usage and the Policies: {{A}} Case Study of {{China}}}, - author = {Wang, Bairong and Li, Yong}, - year = {2021}, - month = may, - journal = {Waste Management}, - volume = {126}, - pages = {163--169}, - publisher = {{Elsevier Ltd}}, - issn = {18792456}, - doi = {10.1016/j.wasman.2021.03.010}, - urldate = {2021-04-21}, - abstract = {Reducing the usage of plastic bags has been a pressing task for governments around the world. In China, the government also makes extensive efforts to contrast the negative effects of plastic bag usage by issuing different laws and policies. Conducting an on-site counting of bags used by consumers, this study investigates the usage of plastic bags in China and evaluates the effectiveness of these policies within both supermarkets and vegetable markets (popular markets primarily for vegetables in China). Besides, 5 different factors are investigated to learn their potential influence on the usage of plastic bags, including generation, gender, the price for plastic carrier bags, the packaging style of products, and market type. Results show a boomerang effect of the pricing policy (i.e., charging for plastic carrier bags) in China. Specifically, the policy decreases the usage of plastic carrier bags by 44\%. However, the total usage of plastic bags increases, rather than decreases due to the excessive usage of free inner plastic packaging bags used as alternatives to plastic carrier bags. Old and middle-young consumers are disproportionately affected by the pricing policy and behave significantly differently in their usage of plastic bags. Loopholes in management and policies are also discussed.}, - keywords = {Boomerang effect,China's plastics banning law,Plastic bags,Plastic waste crisis,Plastics management loopholes} -} - -@article{wangResourcesConservationRecycling2020, - title = {Resources , {{Conservation}} \& {{Recycling Measuring}} Progress of {{China}} ' s Circular Economy}, - author = {Wang, Heming and Schandl, Heinz and Wang, Xinzhe and Ma, Fengmei and Yue, Qiang and Wang, Guoqiang and Wang, Yao and Wei, Yao and Zhang, Zhihe and Zheng, Ruiying}, - year = {2020}, - month = dec, - journal = {Resources, Conservation \& Recycling}, - volume = {163}, - number = {11}, - pages = {105070}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2020.105070}, - urldate = {2020-08-09}, - keywords = {China,Circular economy,material flow analysis,waste and recycling} -} - -@article{wangReviewEmergyAnalysis2020, - title = {Review of {{Emergy Analysis}} and {{Life Cycle Assessment}}: {{Coupling Development Perspective}}}, - author = {Wang, Qingsong and Xiao, Hongkun and Ma, Qiao and Yuan, Xueliang and Zuo, Jian and Zhang, Jian and Wang, Shuguang and Wang, Mansen}, - year = {2020}, - month = jan, - journal = {Sustainability}, - volume = {12}, - number = {1}, - pages = {367}, - publisher = {{MDPI AG}}, - issn = {2071-1050}, - doi = {10.3390/su12010367}, - urldate = {2021-03-26}, - abstract = {{$<$}p{$>$}Two methods of natural ecosystem assessment\textemdash emergy analysis (EMA) and life cycle assessment (LCA)\textemdash are reviewed in this paper. Their advantages, disadvantages, and application areas are summarized, and the similarities and differences between these two evaluation methods are analyzed respectively. Their research progress is also sorted out. The study finds that EMA and LCA share common attributes in evaluation processes and research fields, but they focus on different aspects of macrocosms and microcosms. The assessment of system sustainability is valued by both EMA and LCA, but the former has unique advantages in natural system input analysis, and the latter is more convincing in assessing environmental loading capacity. If the system boundaries of the two methods are expanded, in other words, factors such as ecosystem services, labor, and infrastructure construction are integrated into the upstream of the target system, and environmental impact is further analyzed using LCA in the downstream of the system, the two approaches would complete each other. The quantified results would be more objective. Therefore, these two theories have the necessity of coupling development. After reviewing recent coupling application cases, the results show that LCA and EMA have commonality in the upstream of the target system (mainly in inventory database construction), while the environmental impact assessment methods are different in the downstream. So the overall coupling analysis method is not formed. The current paper gives rational suggestions on the coupling development of the two systems in terms of the aggregate emergy flow table, the indicator system construction and indicator evaluation methods. In addition, it is necessary to introduce sensitivity analysis and uncertainty analysis in order to improve the reliability of assessment results. At present, the research on the coupling development of the two theories is in rapid development stage, but there are still many problems that need further exploration.{$<$}/p{$>$}}, - keywords = {Coupling evaluation,Emergy analysis,Life cycle assessment,Sensitivity analysis,Uncertainty analysis}, - file = {/Users/fabio/Zotero/storage/9KM87TUY/full-text.pdf} -} - -@article{wangScientometricReviewResource2019, - title = {A {{Scientometric Review}} of {{Resource Recycling Industry}}}, - author = {Wang, Minxi and Liu, Ping and Gu, Zhaoliang and Cheng, Hong and Li, Xin}, - year = {2019}, - month = jan, - journal = {International Journal of Environmental Research and Public Health}, - volume = {16}, - number = {23}, - pages = {4654}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {1660-4601}, - doi = {10.3390/ijerph16234654}, - urldate = {2022-08-19}, - abstract = {With rapid economic development and urbanization, a large number of primary resources are consumed and accumulate in society as recyclable resource, which causes great pressure on the environment. The development of the resource recycling industry (RRI) can reduce environmental impacts and achieve sustainable development and green growth. Scholars are paying more attention to the resource recycling industry (RRI), and the related literature continues to increase. There are over 7041 publications covering RRI in the Web of Science database from 1996 to 2018. This paper analyzes the time distribution characteristics of the literature and the status of the scientific research cooperation network using the visualization analysis software CiteSpace. The number of documents increased from 94 in 1996 to a peak of 963 in 2018. There is no relatively stable core author group. The number of papers published by ``Chinese Acad Sci'' ranks first among all research institutions. Document co-citation analysis and burst detection are adopted to assess the status and emerging trends in the RRI research domain. A publication by M.C. Monte on waste management is the most cited paper. Additionally, ``green and sustainable and technology'' and ``science and technology\textemdash other topics'' are the latest emerging subject categories in RRI research. Furthermore, ``e-waste'', ``reverse logistics'' and ``lean manufacturing'' are emerging research trends for RRI, and ``carbon emissions'', ``policy'', ``demolition waste'', ``supply chain management'' and ``compressive strength'' have become hot topics. These findings may provide inspiration for scholars to search for new research directions and ideas.}, - copyright = {http://creativecommons.org/licenses/by/3.0/}, - langid = {english}, - keywords = {circular economy,CiteSpace,green and sustainable development,resource recycling industry,visualization analysis,waste management}, - file = {/Users/fabio/Zotero/storage/FKJBZY97/Wang et al_2019_A Scientometric Review of Resource Recycling Industry.pdf;/Users/fabio/Zotero/storage/T4NMMX9M/4654.html} -} - -@article{wangSmartMunicipalWaste2021, - title = {A Smart Municipal Waste Management System Based on Deep-Learning and {{Internet}} of {{Things}}}, - author = {Wang, Cong and Qin, Jiongming and Qu, Cheng and Ran, Xu and Liu, Chuanjun and Chen, Bin}, - year = {2021}, - month = nov, - journal = {Waste Management}, - volume = {135}, - pages = {20--29}, - publisher = {{Pergamon}}, - issn = {0956-053X}, - doi = {10.1016/J.WASMAN.2021.08.028}, - urldate = {2021-09-15} -} - -@article{wangStatisticalHomogenizationApproach2021, - title = {A {{Statistical Homogenization Approach}} for {{Incorporating Fiber Aspect Ratio Distribution}} in {{Large Area Polymer Composite Deposition Additive Manufacturing Property Predictions}}}, - author = {Wang, Zhaogui and Smith, Douglas E. and Jack, David A.}, - year = {2021}, - month = apr, - journal = {Additive Manufacturing}, - pages = {102006}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2021.102006}, - urldate = {2021-04-29} -} - -@article{wangTechnologicalInnovationMaking2021, - title = {Is Technological Innovation Making World "{{Greener}}"? {{An}} Evidence from Changing Growth Story of {{China}}}, - author = {Wang, Kai-Hua and Umar, Muhammad and Akram, Rabia and Caglar, Ersin}, - year = {2021}, - month = apr, - journal = {Technological Forecasting and Social Change}, - volume = {165}, - pages = {120516}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120516}, - urldate = {2021-01-01} -} - -@article{wangUpcyclingContaminatedPlastics2023, - title = {Upcycling Contaminated Plastics}, - author = {Wang, Meng and Ma, Ding}, - year = {2023}, - month = jun, - journal = {Nature Sustainability}, - pages = {1--2}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-023-01148-y}, - urldate = {2023-07-03}, - abstract = {The upcycling of plastic wastes to realize plastics circularity is obstructed by the presence of chlorine impurities. Now a conversion strategy addresses this problem and paves the way to upcycle chlorine-contaminated plastic wastes.}, - copyright = {2023 Springer Nature Limited}, - langid = {english}, - keywords = {Chemical engineering,Heterogeneous catalysis} -} - -@article{wangWasteSortingContext2022, - title = {Waste Sorting in Context: {{Untangling}} the Impacts of Social Capital and Environmental Norms}, - author = {Wang, Yan and Zhang, Chuchu}, - year = {2022}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {330}, - pages = {129937}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129937}, - urldate = {2021-12-10} -} - -@article{wangWhatNurturesFourth2020, - title = {What Nurtures Fourth Industrial Revolution? {{An}} Investigation of Economic and Social Determinants of Technological Innovation in Advanced Economies}, - author = {Wang, Lu and Luo, Gong-li and Sari, Arif and Shao, Xue-Feng}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120305}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120305}, - urldate = {2020-09-21} -} - -@article{wanPlacebasedApproachRecycling2021, - title = {The Place-Based Approach to Recycling Intention: {{Integrating}} Place Attachment into the Extended Theory of Planned Behavior}, - author = {Wan, Calvin and Shen, Geoffrey Qiping and Choi, Stella}, - year = {2021}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {169}, - pages = {105549}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105549}, - urldate = {2021-03-14} -} - -@techreport{Wascher2018, - title = {Social {{Innovation Labs}} - {{A}} Starting Point for Social Innovation}, - author = {Wascher, Eva and Hebel, Florian and Schrot, Katharina and Schultze, J{\"u}rgen}, - year = {2018}, - address = {{Dortmund}}, - institution = {{TU Dortmund University}}, - mendeley-tags = {Innovation Teams}, - keywords = {Innovation Teams}, - file = {/Users/fabio/Zotero/storage/HGDU75RY/Wascher et al_2018_Social Innovation Labs - A starting point for social innovation.pdf} -} - -@incollection{Wascher2019, - title = {{{SOCIAL INNOVATION LABS}} - {{A SEEDBED FOR SOCIAL INNOVATION}}}, - booktitle = {Atlas Soc. {{Innov}}. 2nd Vol. - {{A}} World New Pract.}, - author = {Wascher, Eva and Kaletka, Christoph and Schultze, J{\"u}rgen}, - year = {2019}, - pages = {136--138}, - address = {{M\"unchen}}, - abstract = {One way of systemically developing new social practices is to use the social innovation labs (SI lab) approach. The term SI lab describes a variety of different organisational forms and methods \textendash{} social entrepreneurship hubs, public policy labs, change labs, and many others \textendash{} with the intention to create socially innovative initiatives.} -} - -@article{Wassenaar2015, - title = {Reconsidering {{Industrial Metabolism}}: {{From Analogy}} to {{Denoting Actuality}}}, - author = {Wassenaar, Tom}, - year = {2015}, - month = oct, - journal = {Journal of Industrial Ecology}, - volume = {19}, - number = {5}, - pages = {715--727}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.12349}, - urldate = {2022-03-17}, - abstract = {Metabolism is a key concept in industrial ecology (IE). Industrial metabolism (IM) is widely used but seldom discussed, and the rare contributions discussing the concept show divergent views, so the debate is still open. Building on recent contributions that broaden the scope of the epistemological debate, the goal of the present discussion is to go beyond the general statement of IM as a biological analogy in IE. The aim is to infer a definition by a thorough deduction so as to further the debate or even federate the community. An etymological analysis demonstrates the eligibility of standpoints other than biological analogy. Moreover, an analysis of the biological characteristics of a metabolism to be emulated may question the pertinence of the currently employed biological analogy. Here, I propose an alternative view based on the present analysis results and in line with modern ecological precepts, whereby IM is considered as an actual phenomenon. According to the definition derived from the analysis-human-mediated matter change for sustaining a productive system's economic activity-IM should be considered as a subset of a complex system of interconnected transformative processes across all scales of life: the metabolic network. The consequences and promising future orientations that may result from adopting such a shift in definition are succinctly explored.}, - keywords = {biological analogy,industrial ecology,industrial metabolism,metabolic network,nature culture dichotomy,nonequilibrium ecology}, - file = {/Users/fabio/Zotero/storage/4R9E4ACN/Wassenaar - 2015 - Reconsidering Industrial Metabolism From Analogy to Denoting Actuality.pdf} -} - -@article{wasserbaurCircularBusinessModels2022, - title = {Circular Business Models and Governmental Policies: {{A}} Systematic Literature Review}, - author = {Wasserbaur, Raphael and Sakao, Tomohiko and Milios, Leonidas}, - year = {2022}, - month = jan, - journal = {Journal of Cleaner Production}, - pages = {130329}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.130329}, - urldate = {2022-01-25} -} - -@article{watzSustainableProductDevelopment2022, - title = {Towards Sustainable Product Development \textendash{} {{Insights}} from Testing and Evaluating a Profile Model for Management of Sustainability Integration into Design Requirements}, - author = {Watz, Matilda and Hallstedt, Sophie I.}, - year = {2022}, - month = mar, - journal = {Journal of Cleaner Production}, - pages = {131000}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131000}, - urldate = {2022-03-14} -} - -@article{Wayland2019, - title = {Three Senses of Paradigm in Scenario Methodology: {{A}} Preliminary Framework and Systematic Approach for Using Intuitive Logics Scenarios to Change Mental Models and Improve Strategic Decision-Making in Situations of Discontinuity}, - author = {Wayland, Rebecca}, - year = {2019}, - month = sep, - journal = {Technological Forecasting and Social Change}, - volume = {146}, - pages = {504--516}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2017.09.005}, - urldate = {2020-05-10}, - abstract = {This article outlines the objectives, activities, and achievements of using intuitive logics scenarios to improve strategic decision-making in situations of discontinuity. Pierre Wack's work at Royal Dutch/Shell illustrates the use of exploratory, reframing, and decision scenarios to change the mental models of decision-makers in advance of the 1973 oil crisis. Thomas S. Kuhn's The Structure of Scientific Revolutions offers a promising theoretical account of paradigm shifts in science, but its application is limited by the ambiguity of the concept of paradigm. Margaret Masterman's distinction of three senses of paradigm \textendash{} introduced as construct paradigm, worldview paradigm, and action paradigm \textendash{} clarifies and extends these accounts to support a preliminary framework and systematic approach. Overall, this investigation expands our understanding of strategic decision-making as guided not only by analytic achievements and developmental investigations but also by discontinuous breaks that can be explored and addressed using scenario methodology. Section 1 provides an introduction and literature review. Section 2 examines the scenarios developed at Royal Dutch/Shell. Section 3 summarizes Kuhn's new image of science, clarified by Masterman's three senses of paradigm in Section 4. Section 5 presents implications for scenario methodology, followed by conclusions and areas for research in Section 6.}, - keywords = {Decision-making,Discontinuity,Mental models,Paradigm,Scenario methodology,Strategy} -} - -@inproceedings{Weber2018, - title = {Open Source Value Chains for Addressing Security Issues Efficiently}, - booktitle = {Proc. - 2018 {{IEEE}} 18th Int. {{Conf}}. {{Softw}}. {{Qual}}. {{Reliab}}. {{Secur}}. {{Companion}}, {{QRS-C}} 2018}, - author = {Weber, Arnd and Reith, Steffen and Kuhlmann, Dirk and Kasper, Michael and Seifert, Jean Pierre and Kraub, Christoph}, - year = {2018}, - month = aug, - pages = {599--606}, - publisher = {{Institute of Electrical and Electronics Engineers Inc.}}, - doi = {10.1109/QRS-C.2018.00105}, - abstract = {It is suggested to improve the level of security by applying the open source paradigm to the entire IT supply chain and by subjecting the resulting components to verification when required. This would lead to a new trajectory for IT product development which could even increase the efficiency of addressing novel types of hardware-oriented attacks or employing stealthy hardware features. This could require increased transparency of semiconductor fabs. For designing open hardware several nuclei already exist. The proposed path would hold particular promise for security-critical components, which could be specified in such a way as to precisely match hardware characteristics. As some components would continue to be built using existing components for some time, a generalized a priori statement about the security of the complete supply chain, such as 'verified' or 'proven', will initially be impossible.}, - isbn = {978-1-5386-7839-8}, - keywords = {Competition,Government support,Open source value chain,Safety,Supply chain risks,Verification} -} - -@article{Wei2017, - title = {Integrating Supply and Social Demand in Ecosystem Services Assessment: {{A}} Review}, - author = {Wei, Hejie and Fan, Weiguo and Wang, Xuechao and Lu, Nachuan and Dong, Xiaobin and Zhao, Yanan and Ya, Xijia and Zhao, Yifei}, - year = {2017}, - journal = {Ecosystem Services}, - volume = {25}, - pages = {15--27}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.03.017}, - urldate = {2021-08-31}, - abstract = {As a result of the unsustainable way in which natural resources are consumed, the gaps between the supply and social demand of ecosystem services (ES) are gradually widening. In this regard, studies have increasingly assessed both ES supply and demand comprehensively. This current review covers recent case studies about the integrated assessment of ES supply and demand (IAESSD), which is defined as the application of ES supply and demand assessments in one case study. By combining some key words (e.g., ES, supply or capacity, demand or flow), 38 IAESSD case studies were selected. The ``indicator-method-mismatches'' in the case studies were then analyzed in detail. The results show that different indicators are applied to distinguish supply and demand. Mapping, participatory methods, and modeling are often used in IAESSD. ES supply\textendash demand mismatches, which have a strong impact on human well-being by causing unsatisfied demand, are influenced by natural and anthropogenic factors. Because of the complex and interactive nature of ecological and economic systems, IAESSD faces challenges regarding the clarification of different ES components from supply to social demand and the provision of promising methods for the identification of ES mismatches. Thus, a framework for further IAESSD research is proposed. This framework highlights the importance of identifying multi-dimensional mismatches and matching ES supply and demand in practice.}, - keywords = {Ecosystem service demand,Ecosystem service supply,Payment for ecosystem service,Supply\textendash demand mismatch}, - file = {/Users/fabio/Zotero/storage/82XBEXDM/full-text.pdf} -} - -@article{Wei2019, - type = {Research-Article}, - title = {Reprocessable {{3D-Printed Conductive Elastomeric Composite Foams}} for {{Strain}} and {{Gas Sensing}}}, - author = {Wei, Peiran and Leng, Houming and Chen, Qiyi and Advincula, Rigoberto C. and Pentzer, Emily B.}, - year = {2019}, - journal = {ACS Applied Polymer Materials}, - volume = {1}, - number = {4}, - pages = {885--892}, - publisher = {{American Chemical Society}}, - issn = {2637-6105}, - doi = {10.1021/acsapm.9b00118}, - abstract = {Mechanically robust, highly compressible, and conductive thermoplastic polyurethane/carbon black foams were successfully fabricated via 3D printing. Thixotropic inks were formulated by dispersing nanoclay, carbon black, and polymer in an organic solvent, and then 3D multifunctional sensors were prepared by direct ink writing (DIW). Sequential removal of solvent and nanoclay yielded a porous polymer/carbon black structure, which maintained excellent elasticity and compression cyclability. The presence of carbon black in the foams led to good electrical conductivity and stable piezoresistive sensing signals at a strain of up to 80\%, including the ability to distinguish human motions. Complementary to a decrease in resistance upon compression, the foam can be used as a gas sensor device, as exposure to volatile organic compounds causes the polymer to swell and an increase in resistance. The printed conductive foams can be easily recycled and reprocessed by dissolution in an organic solvent and subsequent re-...}, - keywords = {3d printing,elastomer,gas sensor,piezoresistive,reprocessable polymer,strain sensor}, - file = {/Users/fabio/Zotero/storage/75SJALYE/Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing.pdf} -} - -@article{weichhartAdaptiveSystemofsystemsApproach2021, - title = {An Adaptive System-of-Systems Approach for Resilient Manufacturing}, - author = {Weichhart, Georg and Mangler, J{\"u}rgen and Raschendorfer, Alexander and {Mayr-Dorn}, Christoph and Huemer, Christian and H{\"a}mmerle, Alexander and Pichler, Andreas}, - year = {2021}, - month = oct, - journal = {e \& i Elektrotechnik und Informationstechnik}, - volume = {138}, - number = {6}, - pages = {341--348}, - issn = {1613-7620}, - doi = {10.1007/s00502-021-00912-2}, - urldate = {2022-10-05}, - abstract = {To implement a resilient manufacturing system, adaptive systems are required to respond to changes and disruptions. In this article, we present a research prototype of an adaptive production system. Adaptivity is implemented here in three components and on different levels. The first component is an adaptive robotic system that can be easily trained to pick up heterogeneous parts and place them on an autonomously guided vehicle. This component implements adaptivity at the task level. The second component is a planning system that can be used to reschedule production orders on an ad hoc basis. This system also allows the simulation of machine failures to analyze resilience. This job shop planning system implements adaptivity at runtime at the level of production execution. The third component is a modular process modeling and execution system that enables adaptivity at the process level. It supports the users in redesigning production processes with the help of a graphical user interface. The overall system is modular, with the three components being run in an adaptive, agile, and decentralized way. It forms a system-of-systems that shows resilience to several disruptive events.}, - langid = {english}, - keywords = {adaptive production systems,adaptive Produktionssysteme,process-oriented systems,prozess-orientierte Systeme,resilience,Resilienz} -} - -@article{weiIncubationModelMaker2021, - title = {Incubation Model of the {{Maker Spaces}} in {{China}}: Co-Working or Co-Creating?}, - author = {Wei, Shanting and Zhang, Zhuo and Chen, Xintong}, - year = {2021}, - month = apr, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--19}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1916455}, - urldate = {2021-04-29}, - abstract = {The Maker Space, as a new kind of incubation platform with Chinese characteristics, has developed rapidly in response to government policies. Two divergent incubation models exist in the Chinese ma...}, - keywords = {co-creating,co-working,evolutionary game,Incubation model,maker space} -} - -@article{weiKnowledgeMappingBioeconomy2022, - title = {Knowledge {{Mapping}} of Bioeconomy: {{A}} Bibliometric Analysis}, - shorttitle = {Knowledge {{Mapping}} of Bioeconomy}, - author = {Wei, Xun and Liu, Qianqian and Pu, Aqing and Wang, Shutong and Chen, Feifei and Zhang, Lei and Zhang, Yong and Dong, Zhenying and Wan, Xiangyuan}, - year = {2022}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {373}, - pages = {133824}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2022.133824}, - urldate = {2022-09-18}, - abstract = {With its cross-cutting nature, bioeconomy offers a unique opportunity to address complex and inter-connected challenges, while achieving economic goals. This fact has pushed many stakeholders to turn to bioeconomy as a path towards sustainable primary production and processing systems. An increasing number of studies on bioeconomy have reflected the multi-disciplinary nature and the constantly evolving definition of bioeconomy. However, there is a lack of systematically interactive analysis on the scientific and practice achievements of bioeconomy. This study aims to explain epistemological developments in various industrial and geographic contexts for the concept of bioeconomy through a comprehensive bibliometric analysis and social network analysis of 6976 articles and reviews that are published from 1996 to 2022 and retrieved in the Web of Science. The study summaries an empirically-based characterization of bioeconomy researches in terms of countries, institutions, authors, hotspots and trends. Based on the reviewing the literature selected from the bibliometric analysis, qualitative conclusions are drawn to provide a more complete view of the intellectual landscape of bioeconomy from theories to practices. The results also helped identify knowledge gaps and future research agenda.}, - langid = {english}, - keywords = {Bibliometric analysis,Circular economy,Epistemological development,Intellectual landscape,Sustainable development}, - file = {/Users/fabio/Zotero/storage/K4I23TGL/S095965262203400X.html} -} - -@article{weiReviewESKnowledge2023, - title = {A Review of {{ES}} Knowledge Use in Spatial Planning}, - author = {Wei, Fang and Zhan, Xiaowen}, - year = {2023}, - month = jan, - journal = {Environmental Science \& Policy}, - volume = {139}, - pages = {209--218}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.11.003}, - urldate = {2022-12-12}, - abstract = {Despite the great progress made in ES (ecosystem service) science, the integration of ES into spatial planning remains below expectations. The science-policy/practice gap in ES application impedes the transformation toward sustainable spatial planning. In this review, we draw on the perspective from the science-policy interface to examine the use of ES knowledge in spatial planning. From the science perspective, we find that the usability of ES science has improved in recent years, although the evidence base used in planning remains incomplete; from the policy perspective, there is a lack of research on the way policymakers demand knowledge and their logic of action. Issues of power and politics are under-explored; given that the ES community advocates knowledge co-production as a significant merit of the ES approach, this is both surprising and worrying because of the multiple risks inherent in participatory processes. ES research should attend to these aspects to realize greater integration and policy effects in spatial planning.}, - langid = {english}, - keywords = {Ecosystem service,Knowledge use,Science-policy interface,Spatial planning}, - file = {/Users/fabio/Zotero/storage/239STFN2/Wei_Zhan_2023_A review of ES knowledge use in spatial planning.pdf;/Users/fabio/Zotero/storage/P9W8RP52/S1462901122003422.html} -} - -@article{Weiss2012, - title = {A {{Review}} of the {{Environmental Impacts}} of {{Biobased Materials}}}, - author = {Weiss, Martin and Haufe, Juliane and Carus, Michael and Brand??o, Miguel and Bringezu, Stefan and Hermann, Barbara and Patel, Martin K.}, - year = {2012}, - journal = {Journal of Industrial Ecology}, - volume = {16}, - number = {SUPPL.1}, - issn = {10881980}, - doi = {10.1111/j.1530-9290.2012.00468.x}, - abstract = {Concerns over climate change and the security of industrial feedstock supplies have been opening a growing market for biobasedmaterials. This development, however, also presents a challenge to scientists, policy makers, and industry because the production of biobased materials requires land and is typically associated with adverse environmental effects. This article addresses the environmental impacts of biobased materials in a meta-analysis of 44 life cycle assessment (LCA) studies. The reviewed literature suggests that one metric ton (t) of biobased materials saves, relative to conventional materials, 55{$\pm$}34 gigajoules of primary energy and 3 {$\pm$} 1 t carbon dioxide equivalents of greenhouse gases. However, biobased materials may increase eutrophication by 5 {$\pm$} 7 kilograms (kg) phosphate equivalents/t and stratospheric ozone depletion by 1.9 {$\pm$} 1.8 kg nitrous oxide equivalents/t. Our findings are inconclusive with regard to acidification (savings of 2 {$\pm$} 20 kg sulfur dioxide equivalents/t) and photochemical ozone formation (savings of 0.3 {$\pm$} 2.4 kg ethene equivalents/t). The variability in the results of life cycle assessment studies highlights the difficulties in drawing general conclusions. Still, common to most biobased materials are impacts caused by the application of fertilizers and pesticides during industrial biomass cultivation. Additional land use impacts, such as the potential loss of biodiversity, soil carbon depletion, soil erosion, deforestation, as well as greenhouse gas emissions from indirect land use change are not quantified in this review. Clearly these impacts should be considered when evaluating the environmental performance of biobased materials.}, - isbn = {1530-9290}, - pmid = {44}, - keywords = {Biomass,Environmental impact assessment,Greenhouse gas (GHG) emissions,Industrial ecology,Life cycle assessment,Meta-analysis}, - file = {/Users/fabio/Zotero/storage/9KVL27WS/A Review of the Environmental Impacts of Biobased Materials.pdf} -} - -@article{Welle2005, - title = {Post-Consumer Contamination in High-Density Polyethylene ({{HDPE}}) Milk Bottles and the Design of a Bottle-to-Bottle Recycling Process}, - author = {Welle, F.}, - year = {2005}, - month = oct, - journal = {Food Additives and Contaminants}, - volume = {22}, - number = {10}, - pages = {999--1011}, - issn = {0265-203X}, - doi = {10.1080/02652030500157742}, - file = {/Users/fabio/Zotero/storage/SE29ZH7A/Postconsumer contamination of HDPE milk bottle.pdf} -} - -@book{Welle2005a, - title = {Develop a Food Grade {{HDPE}} Recycling Process}, - author = {Welle, Frank}, - year = {2005}, - journal = {Research Report: Plastics}, - number = {Ivv}, - isbn = {1-84405-225-7}, - file = {/Users/fabio/Zotero/storage/C7U2YYGH/Developing HDPE .pdf} -} - -@article{Welle2011, - title = {Twenty Years of {{PET}} Bottle to Bottle Recycling - {{An}} Overview}, - author = {Welle, Frank}, - year = {2011}, - journal = {Resources, Conservation and Recycling}, - volume = {55}, - number = {11}, - pages = {865--875}, - publisher = {{Elsevier B.V.}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2011.04.009}, - abstract = {Polyethylene terephthalate (PET) has become the most favourable packaging material world-wide for beverages. The reason for this development is the excellent material properties of the PET material, especially its unbreakability and the very low weight of the bottles compared to glass bottles of the same filling volume. Nowadays, PET bottles are used for softdrinks, mineral water, energy drinks, ice teas as well as for more sensitive beverages like beer, wine and juices. For a long time, however, a bottle-to-bottle recycling of post-consumer PET packaging materials was not possible, because of the lack of knowledge about contamination of packaging polymers during first use or recollection. In addition, the decontamination efficiencies of recycling processes were in most cases unknown. During the last 20 years, PET recollection as well as recycling processes made a huge progress. Today, sophisticated decontamination processes, so-called super-clean recycling processes, are available for PET, which are able to decontaminate post-consumer contaminants to concentration levels of virgin PET materials. In the 1991, the first food contact approval of post-consumer PET in direct food contact applications has been given for post-consumer recycled PET in the USA. Now, 20 years after the first food approval of a PET super-clean recycling process, this article gives an overview over the world-wide progress of the bottle-to-bottle recycling of PET beverage bottles, e.g. the recollection amount of post-consumer PET bottles and the super-clean recycling technologies. ?? 2011 Elsevier B.V. All rights reserved.}, - isbn = {0921-3449}, - pmid = {16904258}, - keywords = {Bottle-to-bottle recycling,Food packaging,Mechanical recycling,PET bottle,Super-clean recycling}, - file = {/Users/fabio/Zotero/storage/3JA79NXU/Welle - 2011 - Twenty years of PET bottle to bottle recycling - An overview.pdf} -} - -@article{Welle2016, - title = {Investigation into Cross-Contamination during Cleaning Efficiency Testing in {{PET}} Recycling}, - author = {Welle, Frank}, - year = {2016}, - month = sep, - journal = {Resources, Conservation and Recycling}, - volume = {112}, - pages = {65--72}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2016.05.003}, - urldate = {2020-04-08}, - abstract = {The cleaning efficiency of a PET recycling process is typically investigated by artificial contamination of post-consumer PET flakes within a so-called challenge test. Challenging of pilot plants or industrial scale lines is done be introducing a certain amount of contaminated flakes while running the process with non-contaminated flakes of different colour. After decontamination the contaminated flakes are separated from the non-contaminated flakes and only the contaminated flakes were analysed due to their residual contamination level. The European Food Safety Authority (EFSA), however, raised the question about cross-contamination, which might reduce the overall cleaning efficiency of the recycling process. Cross-contamination is defined as the transfer of surrogate contaminants from the initially contaminated to the initially not contaminated material during a challenge test. Data for the phenomenon of cross-contamination are not available in the scientific literature. Aim of the study was to close this gap by providing experimental data for cross-contamination by use of several challenge tests. As a result cross-contamination was found only at ratios of 1:1 between contaminated and non-contaminated PET flakes. At higher ratios which were typically applied in challenge tests on pilot plant or industrial scale line cross-contamination do not play a significant role. In addition, the results show that cross-contamination is negligible for volatile compounds.}, - keywords = {Challenge test,Cross-contamination,PET bottles,PET recycling}, - file = {/Users/fabio/Zotero/storage/KNB6XG5I/Investigation into cross-contamination during cleaning efficiency testing in PET recycling.pdf} -} - -@article{Weller2015, - title = {Economic Implications of {{3D}} Printing: {{Market}} Structure Models in Light of Additive Manufacturing Revisited}, - author = {Weller, Christian and Kleer, Robin and Piller, Frank T.}, - year = {2015}, - journal = {International Journal of Production Economics}, - volume = {164}, - pages = {43--56}, - issn = {09255273}, - doi = {10.1016/j.ijpe.2015.02.020}, - abstract = {Additive manufacturing (AM), colloquially known as 3D printing, is currently being promoted as the spark of a new industrial revolution. The technology allows one to make customized products without incurring any cost penalties in manufacturing as neither tools nor molds are required. Moreover, AM enables the production of complex and integrated functional designs in a one-step process, thereby also potentially reducing the need for assembly work. In this article, we discuss the impact of AM technology at both firm and industry level. Our intention is to discern how market structures will be affected from an operations management perspective. Based on an analysis of established economic models, we first identify the economic and technological characteristics of AM and distill four key principles relevant to manufacturers at firm level. We then critically assess the effects of AM at industry level by analyzing the validity of earlier assumptions in the models when these four principles apply. In so doing, we derive a set of seven propositions which provide impetus for future research. In particular, we propose that in a monopoly, the adoption of AM allows a firm to increase profits by capturing consumer surplus when flexibly producing customized products. Meanwhile in competitive markets, competition is spurred as AM may lower barriers to market entry and offers the ability to serve multiple markets at once. This should ultimately result in lower prices for consumers.}, - keywords = {3D printing,Additive manufacturing,Economic modeling,Flexible manufacturing,Market structure}, - file = {/Users/fabio/Zotero/storage/7JZIDKHX/Economic implications of 3D printing Market structure models in light of additive manufacturing revisited.pdf} -} - -@article{Wen2008, - title = {An {{Innovative Methodology}} of {{Product Design}} from {{Nature}}}, - author = {Wen, Hui I. and jun Zhang, Shu and Hapeshi, Kevin and feng Wang, Xiao}, - year = {2008}, - journal = {Journal of Bionic Engineering}, - volume = {5}, - number = {1}, - pages = {75--84}, - issn = {16726529}, - doi = {10.1016/S1672-6529(08)60009-8}, - abstract = {Nature is an information sourcebook of behaviour, function, colour and shape which can inspire visual design and invention. Studying the form and functional characteristics of a natural object can provide inspiration for product design and help to improve the marketability of manufactured products. The inspiration can be triggered either by direct observation or captured by three-dimensional (3D) digitising techniques to obtain superficial information (geometry and colour). An art designer often creates a concept in the form of a two-dimensional (2D) sketch while engineering methods lead to a point cloud in 3D. Each has its limitations in that the art designer commonly lacks the knowledge to build a final product from a 2D sketch and the engineering designer's 3D point clouds may not be very beautiful. We propose a method for Product Design from Nature (PDN), coupling aesthetic intent and geometrical characteristics, exploring the interactions between designers and nature's systems in PDN. We believe that this approach would considerably reduce the lead time and cost of product design from nature. \textcopyright{} 2008 Jilin University.}, - isbn = {1672-6529}, - keywords = {bio-inspiration design,conceptual design,design from nature,designer sketch inspiration,forms aesthetic}, - file = {/Users/fabio/Zotero/storage/36B4S8TD/an innovative methodology of product design from nature.pdf} -} - -@article{wernaartDevelopingRoadmapMoral2021, - title = {Developing a Roadmap for the Moral Programming of Smart Technology}, - author = {Wernaart, Bart}, - year = {2021}, - month = feb, - journal = {Technology in Society}, - volume = {64}, - pages = {101466}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101466}, - urldate = {2020-12-14}, - file = {/Users/fabio/Zotero/storage/FG7AILJZ/full-text.pdf} -} - -@article{wernersAdaptationPathwaysReview2021, - title = {Adaptation Pathways: {{A}} Review of Approaches and a Learning Framework}, - author = {Werners, Saskia E. and Wise, Russell M. and Butler, James R.A. and Totin, Edmond and Vincent, Katharine}, - year = {2021}, - month = feb, - journal = {Environmental Science \& Policy}, - volume = {116}, - pages = {266--275}, - publisher = {{Elsevier}}, - issn = {14629011}, - doi = {10.1016/j.envsci.2020.11.003}, - urldate = {2021-01-03}, - file = {/Users/fabio/Zotero/storage/MWEH7Z49/full-text.pdf} -} - -@article{West2016a, - title = {The Complementarity of Openness: {{How MakerBot}} Leveraged {{Thingiverse}} in {{3D}} Printing}, - author = {West, Joel and Kuk, George}, - year = {2016}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {102}, - pages = {169--181}, - publisher = {{Elsevier B.V.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2015.07.025}, - abstract = {Selective openness allows a firm to sell a systemic innovation that combines both open and proprietary technologies. Such firm strategies are now common for open source software and other information goods. However, they pose conceptual and practical uncertainties for hardware-focused companies, particularly as research on open hardware has emphasized community rather than firm success. Here we study firm openness in 3D printing, with a case study of how MakerBot Industries leveraged external communities and selective openness become the consumer market leader. After reviewing the literature on systemic innovation and selective openness, we document the proprietary strategies of a dozen startup companies during the first two decades of the 3D printing industry. We contrast this to the open hardware, software and content strategy that MakerBot's founders used to enter and grow the consumer market from 2009 onward. We show how MakerBot shifted to a selectively open, systemic innovation strategy that complemented proprietary hardware and software with open user-generated content from its Thingiverse online community. From this, we suggest the inherent complementarity of selective openness strategies between open and proprietary components, and conclude with predictions as to when and how a startup or incumbent firm will combine open and proprietary elements.}, - isbn = {0040-1625}, - keywords = {3D printing,Complementary assets,Online communities,Open design,Open innovation}, - file = {/Users/fabio/Zotero/storage/3EQKKC7B/The complementarity of openness How MakerBot leveraged Thingiverse in 3D printing(2).pdf;/Users/fabio/Zotero/storage/U8JA4S4B/The complementarity of openness How MakerBot leveraged Thingiverse in 3D printing.pdf} -} - -@techreport{Westley2015, - title = {Social Innovation Lab Guide}, - author = {Westley, F. and Laban, S. and Rose, C. and McGowan, K. and Robinson, K. and Tjornbo, O. and Tovey, M.}, - year = {2015}, - pages = {110}, - address = {{Ontario}}, - institution = {{Waterloo Institute for Social Innovation and Resilience: Waterloo}}, - abstract = {The Social Innovation Lab Guide is a direct output of the grant from the Rockefeller Foundation, Designing and Testing a Social Innovation Lab. Since 2007, the team led by Dr. Frances Westley at the Waterloo Institute for Social Innovation and Resilience (WISIR), in collaboration with many colleagues, including those within the Canada's Social Innovation Generation (SiG) partnership, have been generating and sharing new knowledge about how significant change happens in the world. WISIR's interest in the possibility of processes that catalyze real and durable innovation has driven a number of years of exploring the potential of 'Labs'. The Social Innovation Lab emphasizes not only imagining high potential interventions but also gaining system sight, redefining problems, and identifying opportunities in the broader context with the potential to tip systems in positive directions. It is a three-step process of developing, testing and instigating innovation strategies. It requires the right starting conditions, an investment in research and skilled facilitators. It also makes use of computer modeling to proto-typing interventions in complex systems. Like other processes for convening multi-stakeholder groups working on complex challenges, it is best suited to the early stages of making change. This guide is offered as a resource to peers, colleagues, practitioners, leaders from all sectors, and concerned citizens - all who have and/or will participate in change-making processes. One hope for this work is that these ideas on Social Innovation and these recommendations for new practice will result in greater sense of agency for those who work on what often seems like impossible aspirations for a different, better world. Probably our greatest hope is that these ideas help to transform the impossible into the possible.} -} - -@inproceedings{westleyTippingSustainabilityEmerging2011, - title = {Tipping toward Sustainability: {{Emerging}} Pathways of Transformation}, - booktitle = {Ambio}, - author = {Westley, Frances and Olsson, Per and Folke, Carl and {Homer-Dixon}, Thomas and Vredenburg, Harrie and Loorbach, Derk and Thompson, John and Nilsson, Mns and Lambin, Eric and Sendzimir, Jan and Banerjee, Banny and Galaz, Victor and Van Der Leeuw, Sander}, - year = {2011}, - month = nov, - volume = {40}, - pages = {762--780}, - issn = {00447447}, - doi = {10.1007/s13280-011-0186-9}, - abstract = {This article explores the links between agency, institutions, and innovation in navigating shifts and large-scale transformations toward global sustainability. Our central question is whether social and technical innovations can reverse the trends that are challenging critical thresholds and creating tipping points in the earth system, and if not, what conditions are necessary to escape the current lock-in. Large-scale transformations in information technology, nano- and biotechnology, and new energy systems have the potential to significantly improve our lives; but if, in framing them, our globalized society fails to consider the capacity of the biosphere, there is a risk that unsustainable development pathways may be reinforced. Current institutional arrangements, including the lack of incentives for the private sector to innovate for sustainability, and the lags inherent in the path dependent nature of innovation, contribute to lock-in, as does our incapacity to easily grasp the interactions implicit in complex problems, referred to here as the ingenuity gap. Nonetheless, promising social and technical innovations with potential to change unsustainable trajectories need to be nurtured and connected to broad institutional resources and responses. In parallel, institutional entrepreneurs can work to reduce the resilience of dominant institutional systems and position viable shadow alternatives and niche regimes. \textcopyright{} Royal Swedish Academy of Sciences 2011.}, - pmid = {22338714}, - keywords = {Innovation,Resilience transitions,Social-ecological systems,Sustainability,Transformation}, - file = {/Users/fabio/Zotero/storage/HG7IXME8/full-text.pdf} -} - -@article{westphalMachineLearningIntelligent2022, - title = {Machine Learning for the Intelligent Analysis of {{3D}} Printing Conditions Using Environmental Sensor Data to Support Quality Assurance}, - author = {Westphal, Erik and Seitz, Hermann}, - year = {2022}, - month = feb, - journal = {Additive Manufacturing}, - volume = {50}, - pages = {102535}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102535}, - urldate = {2021-12-10} -} - -@article{Whalen2019, - title = {Three Circular Business Models That Extend Product Value and Their Contribution to Resource Efficiency}, - author = {Whalen, Katherine A.}, - year = {2019}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {226}, - pages = {1128--1137}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.03.128}, - urldate = {2020-03-21}, - abstract = {Circular business models aim to preserve the value of material resources in society by slowing and closing resource flows. Various models have been identified, including the Extending Product Value business model, which plays a role in extending product lifetimes by reversing product obsolescence. However, the characteristics of these business models and their associated environmental consequences have remained largely unexplored in research. This paper aims to address this gap by analysing three types of Extending Product Value business models and reflecting on their resource efficiency contributions. A framework, developed from an analysis of 56 firms, is used to facilitate this reflection. The framework considers the level of interaction between the product and firm and introduces three Extending Product Value business model archetypes: Facilitators, Redistributors, and Doers. The analysis suggests that different environmental impacts are relevant for each type of firm, and the higher the firm-product interaction, the greater the resource efficiency potential of the business model. The paper also suggests characteristics that should be considered if such business models are to contribute to a more resource-efficient circular economy. The findings are relevant for a variety of actors interested in the circular economy, including researchers assessing the resource efficiency of business models, firms interested in developing new resource-efficient business models or increasing the resource efficiency of existing ones, and policymakers promoting the adoption of circular business models.} -} - -@techreport{WhenCircularityGoes, - title = {When Circularity Goes from Bad to Worse}, - urldate = {2020-12-01}, - file = {/Users/fabio/Zotero/storage/B3ZHZTSM/full-text.pdf} -} - -@misc{WhereDoesPlastic, - title = {Where Does the Plastic in Our Oceans Come from? - {{Our World}} in {{Data}}}, - urldate = {2021-05-03}, - howpublished = {https://ourworldindata.org/ocean-plastics} -} - -@article{whiteUsingEcosystemServices2021, - title = {Using Ecosystem Services to Measure the Degree to Which a Solution Is Nature-Based}, - author = {White, Cian and Collier, Marcus J. and Stout, Jane C.}, - year = {2021}, - month = aug, - journal = {Ecosystem Services}, - volume = {50}, - pages = {101330}, - publisher = {{Elsevier}}, - issn = {2212-0416}, - doi = {10.1016/J.ECOSER.2021.101330}, - urldate = {2021-08-23}, - abstract = {There has been a recent surge of interest in Nature-based Solutions, a concept encompassing a broad suite of ideas that have arisen from the intersection of ecology, engineering, sociology and economics. Solutions founded in nature are promised to resolve many issues resulting from global change, including reducing flood risk and air pollution, building social cohesion and enhancing resilience. However, what a Nature-based Solution means in practice remains unstructured and vaguely defined. Specifically, what is meant by Nature-based is not well defined and there has been little effort to rigorously understand how a solution is created. In response, we propose an integrated conceptual framework, extending the service-benefit relationship to include solutions, while acknowledging that multiple types of service exist (ecosystem services, technological services and labour). We present a method to measure the degree to which a solution is Nature-based: calculate the relative contribution of ecosystem services, compared with technological services and labour. The method and framework are applied to projects dealing with problems related to water pollution, demonstrating their applicability. The framework can be a useful tool to guide environmental managers in identifying both the scale and context at which, and the problems to which, Nature-based Solutions are applicable.}, - keywords = {Ecosystem Management,Ecosystem Service,Method,Natural Capital,Nature-based Solution,Sustainability}, - file = {/Users/fabio/Zotero/storage/MSETKFSD/full-text.pdf} -} - -@article{Whyman2018, - title = {Design and Development of an Extrusion System for {{3D}} Printing Biopolymer Pellets}, - author = {Whyman, Sean and Arif, Khalid Mahmood and Potgieter, Johan}, - year = {2018}, - month = jun, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {96}, - number = {9-12}, - pages = {3417--3428}, - publisher = {{The International Journal of Advanced Manufacturing Technology}}, - issn = {0268-3768}, - doi = {10.1007/s00170-018-1843-y}, - abstract = {The extrusion system is an integral part of any fused deposition style 3D printing technique. However, the extruder designs found in commercial and hobbyist printers are mostly suitable for materials in filament form. While printing with a filament is not a problem per se, the printing of materials that may not be readily available in the filament form or not commercially viable remains untapped, e.g., biopolymers and material blends. This is particularly an issue in the research and hobbyist space where the capability of printing a variety of materials or materials recycled from already printed parts may be of utmost importance. This paper presents a pellet-based extrusion system for the 3D printing of biopolymers. The system has been designed from the first principles and therefore can be extended to other materials with parameter adjustments or slight hardware modifications. A robust mechatronic design has been realized using an unconventional yet simplistic approach. The extrusion system uses a series of control factors to generate a consistent output of material over the course of a print. The platform and surrounding processes are set up so that software can be used to define the printing parameters; this allows a simpler adaption to different materials. The utility of the extruder is demonstrated through extensive printing and testing of the printed parts.}, - keywords = {Biopolymer printing,Extruder design,Fused deposition modeling,Pellet extrusion,Polylactic acid}, - file = {/Users/fabio/Zotero/storage/DQP9XFMM/design and development of an extrusion system for 3d printing biopolymer pellets.pdf} -} - -@article{wiardaComprehensiveAppraisalResponsible2021, - title = {A Comprehensive Appraisal of Responsible Research and Innovation: {{From}} Roots to Leaves}, - author = {Wiarda, Martijn and {van de Kaa}, Geerten and Yaghmaei, Emad and Doorn, Neelke}, - year = {2021}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {172}, - pages = {121053}, - publisher = {{North-Holland}}, - issn = {0040-1625}, - doi = {10.1016/J.TECHFORE.2021.121053}, - urldate = {2021-08-23}, - abstract = {Responsible Research and Innovation and Responsible Innovation, as academic endeavours, have grown substantially since their birth in the previous decades. They have been used as synonyms on a structural basis, and both concepts have been studied from various disciplinary backgrounds. This paper identifies Responsible Research and Innovation's and Responsible Innovation's shared research topics, knowledge base, and academic organisation as a common ground for scholars to further their individual or joint research. It does so by conducting a keyword analysis and a collaboration analysis, combined with a reference analysis of their academic literature. This paper discusses the most influential references in chronological order and sheds light on the accumulation of knowledge. The results suggest that Responsible Research and Innovation and Responsible Innovation have matured into an increasingly cumulative and interconnected research trajectory following the footsteps of similar, more mature research areas.}, - file = {/Users/fabio/Zotero/storage/TF9DTYAH/full-text.pdf} -} - -@article{wickenbergAdvancingImplementationNaturebased2021, - title = {Advancing the Implementation of Nature-Based Solutions in Cities: {{A}} Review of Frameworks}, - author = {Wickenberg, Bj{\"o}rn and McCormick, Kes and Olsson, Johanna Alkan}, - year = {2021}, - month = nov, - journal = {Environmental Science \& Policy}, - volume = {125}, - pages = {44--53}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2021.08.016}, - urldate = {2021-09-15} -} - -@article{Widden2010, - title = {Design-Build-Test of Model Aerofoils for Engineering Education Using {{FDM}}}, - author = {Widden, Martin and Gunn, Kester}, - year = {2010}, - month = dec, - journal = {Virtual and Physical Prototyping}, - volume = {5}, - number = {4}, - pages = {189--194}, - issn = {1745-2759}, - doi = {10.1080/17452759.2010.528841}, - urldate = {2014-02-02}, - keywords = {aerofoils,build orientation,fdm,surface finish}, - file = {/Users/fabio/Zotero/storage/BTIN9ASQ/Widden, Gunn - 2010 - Design-build-test of model aerofoils for engineering education using FDM.pdf} -} - -@article{Wiedmann2016, - title = {The {{Concept}} of {{City Carbon Maps}}: {{A Case Study}} of {{Melbourne}}, {{Australia}}}, - author = {Wiedmann, Thomas O. and Chen, Guangwu and Barrett, John}, - year = {2016}, - month = aug, - journal = {Journal of Industrial Ecology}, - volume = {20}, - number = {4}, - pages = {676--691}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {15309290}, - doi = {10.1111/jiec.12346}, - urldate = {2022-02-22}, - abstract = {Cities are thought to be associated with most of humanity's consumption of natural resources and impacts on the environment. Cities not only constitute major centers of economic activity, knowledge, innovation, and governance\textemdash they are also said to be linked to approximately 70\% to 80\% of global carbon dioxide emissions. This makes cities primary agents of change in a resource- and carbon-constraint world. In order to set meaningful targets, design successful policies, and implement effective mitigation strategies, it is important that greenhouse gas (GHG) emissions accounting for cities is accurate, comparable, comprehensive, and complete. Despite recent developments in the standardization of city GHG accounting, there is still a lack of consistent guidelines regarding out-of-boundary emissions, thus hampering efforts to identify mitigation priorities and responsibilities. We introduce a new conceptual framework\textemdash based on environmental input-output analysis\textemdash that allows for a consistent and complete reconciliation of direct and indirect GHG emissions from a city. The ``city carbon map'' shows local, regional, national, and global origins and destinations of flows of embodied emissions. We test the carbon map concept by applying it to the greater metropolitan area of Melbourne, Australia. We discuss the results and limitations of the approach in the light of possible mitigation strategies and policies by different urban stakeholders.}, - keywords = {accounting and reporting standards,city carbon footprint,community-scale greenhouse gas emissions,consumption-based accounting,industrial ecology,urban greenhouse gas accounting}, - file = {/Users/fabio/Zotero/storage/XBMYDTRB/full-text.pdf} -} - -@article{Wigley1981, - title = {Global Warming?}, - author = {Wigley, T. M.L. and Jones, P. D. and Kelly, P. M.}, - year = {1981}, - journal = {Nature}, - volume = {291}, - number = {5813}, - pages = {285}, - issn = {00280836}, - doi = {10.1038/291285a0}, - file = {/Users/fabio/Zotero/storage/UAKCNSVM/Global warming of 1.5C.pdf} -} - -@article{Wijnen2014, - title = {Open-{{Source Syringe Pump Library}}}, - author = {Wijnen, Bas and Hunt, Emily J. and Anzalone, Gerald C. and Pearce, Joshua M.}, - editor = {Gilestro, Giorgio F.}, - year = {2014}, - month = sep, - journal = {PLoS ONE}, - volume = {9}, - number = {9}, - pages = {e107216}, - issn = {1932-6203}, - doi = {10.1371/journal.pone.0107216}, - abstract = {This article explores a new open-source method for developing and manufacturing high-quality scientific equipment suitable for use in virtually any laboratory. A syringe pump was designed using freely available open-source computer aided design (CAD) software and manufactured using an open-source RepRap 3-D printer and readily available parts. The design, bill of materials and assembly instructions are globally available to anyone wishing to use them. Details are provided covering the use of the CAD software and the RepRap 3-D printer. The use of an open-source Rasberry Pi computer as a wireless control device is also illustrated. Performance of the syringe pump was assessed and the methods used for assessment are detailed. The cost of the entire system, including the controller and web-based control interface, is on the order of 5\% or less than one would expect to pay for a commercial syringe pump having similar performance. The design should suit the needs of a given research activity requiring a syringe pump including carefully controlled dosing of reagents, pharmaceuticals, and delivery of viscous 3-D printer media among other applications}, - file = {/Users/fabio/Zotero/storage/DZQM4YWW/Wijnen et al. - 2014 - Open-Source Syringe Pump Library.pdf} -} - -@article{wijsmanWhatWeMean2022, - title = {What Do We Mean by Justice in Sustainability Pathways? {{Commitments}}, Dilemmas, and Translations from Theory to Practice in Nature-Based Solutions.}, - shorttitle = {What Do We Mean by Justice in Sustainability Pathways?}, - author = {Wijsman, Katinka and {Berb{\'e}s-Bl{\'a}zquez}, Marta}, - year = {2022}, - month = oct, - journal = {Environmental Science \& Policy}, - volume = {136}, - pages = {377--386}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2022.06.018}, - urldate = {2022-08-11}, - abstract = {Justice and fairness have become key considerations in sustainability pathways and nature-based solutions (NBS), following activists and critical scholars who have long argued that the urban environment is an inherently political space that requires an analysis of benefits and burdens associated with its existence, use, and access. However, what justice means and how it is expressed, recognized, or achieved is often implicit in the literature on NBS, even though underlying notions of justice shape the analysis done and actions proposed. This paper starts from the premise that justice knows many different interpretations, therefore warranting scholars and practitioners working on NBS to carefully consider the differences and frictions between competing meanings of justice. Drawing from the history of social and environmental justice theory, we give an account of some key justice dilemmas and discuss their tenets as it relates to the end, means, and participants in the making of justice. From this, we draw out questions and commitments academics and practitioners in the NBS space should~grapple with more explicitly. We argue that the emergent tension between pragmatic policy approaches and critical theoretical engagement is hindering a version of NBS that goes beyond a reflection of the justice implications of NBS to ensuring that NBS contributes to the furthering of justice. We advocate for the inclusion of critical social sciences and humanities perspectives and approaches beyond tokenism to instead encourage ontological, epistemological, and political reflection of the work academics and practitioners do in the NBS space.}, - langid = {english}, - keywords = {Co-benefits,Critical social sciences and humanities,Justice,Nature-based Solutions,Participation,Praxis,Reflexivity,Urban greening}, - file = {/Users/fabio/Zotero/storage/VATQ2NNL/Wijsman_Berbés-Blázquez_2022_What do we mean by justice in sustainability pathways.pdf;/Users/fabio/Zotero/storage/7F2HDKXD/S1462901122002088.html} -} - -@article{wilgoshWhenTwoMovements2022, - title = {When Two Movements Collide: Learning from Labour and Environmental Struggles for Future {{Just Transitions}}}, - author = {Wilgosh, Becca and Sorman, Alevgul H. and Barcena, I{\~n}aki}, - year = {2022}, - month = jan, - journal = {Futures}, - publisher = {{Pergamon}}, - issn = {0016-3287}, - doi = {10.1016/J.FUTURES.2022.102903}, - urldate = {2022-01-25} -} - -@article{willcockEarlierCollapseAnthropocene2023, - title = {Earlier Collapse of {{Anthropocene}} Ecosystems Driven by Multiple Faster and Noisier Drivers}, - author = {Willcock, Simon and Cooper, Gregory S. and Addy, John and Dearing, John A.}, - year = {2023}, - month = jun, - journal = {Nature Sustainability}, - pages = {1--12}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-023-01157-x}, - urldate = {2023-07-03}, - abstract = {A major concern for the world's ecosystems is the possibility of collapse, where landscapes and the societies they support change abruptly. Accelerating stress levels, increasing frequencies of extreme events and strengthening intersystem connections suggest that conventional modelling approaches based on incremental changes in a single stress may provide poor estimates of the impact of climate and human activities on ecosystems. We conduct experiments on four models that simulate abrupt changes in the Chilika lagoon fishery, the Easter Island community, forest dieback and lake water quality\textemdash representing ecosystems with a range of anthropogenic interactions. Collapses occur sooner under increasing levels of primary stress but additional stresses and/or the inclusion of noise in all four models bring the collapses substantially closer to today by \textasciitilde 38\textendash 81\%. We discuss the implications for further research and the need for humanity to be vigilant for signs that ecosystems are degrading even more rapidly than previously thought.}, - copyright = {2023 The Author(s)}, - langid = {english}, - keywords = {Climate-change ecology,Computer modelling,Geography,Projection and prediction}, - file = {/Users/fabio/Zotero/storage/Z42QBME8/Willcock et al. - 2023 - Earlier collapse of Anthropocene ecosystems driven.pdf} -} - -@article{Williams2003, - title = {03/02448 {{Green}} Waste Collection and the Public's Recycling Behaviour in the {{Borough}} of {{Wyre}}, {{England Williams}}, {{I}}. {{D}}. and {{Kelly}}, {{J}}. {{Resources}}, {{Conservation}} and {{Recycling}}, 2003, 38, (2), 139\textendash 159}, - author = {Williams, I D and Kelly, J}, - year = {2003}, - journal = {Fuel and Energy Abstracts}, - volume = {44}, - number = {6}, - pages = {396}, - issn = {01406701}, - doi = {10.1016/S0140-6701(03)92577-X}, - keywords = {- see front matter,02,0921-3449,2002 elsevier science b,44-1772-892-926,44-1772-893-961,ac,all rights reserved,biodegradable municipal waste,corresponding author,d,e-mail address,fax,green waste,i,idwilliams,postal questionnaire,recycling,social survey,tel,uclan,uk,v,williams}, - file = {/Users/fabio/Zotero/storage/XQGBB3IT/0302448 Green waste collection and the public's recycling behaviour in the Borough of Wyre, England Williams, I. D. and Kelly, J. Reso.pdf} -} - -@article{Williams2003a, - title = {Green Waste Collection and the Public's Recycling Behaviour in the {{Borough}} of {{Wyre}}, {{England}}}, - author = {Williams, I.D. and Kelly, J.}, - year = {2003}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {38}, - number = {2}, - pages = {139--159}, - issn = {09213449}, - doi = {10.1016/S0921-3449(02)00106-4} -} - -@article{Williams2008, - title = {Re-Thinking the Motives of Do-It-Yourself ({{DIY}}) Consumers}, - author = {Williams, Colin C.}, - year = {2008}, - month = jul, - journal = {The International Review of Retail, Distribution and Consumer Research}, - volume = {18}, - number = {3}, - pages = {311--323}, - issn = {0959-3969}, - doi = {10.1080/09593960802113885} -} - -@article{Williams2019, - title = {Enhancing {{Socio-technical Governance}}: {{Targeting Inequality}} in {{Innovation Through Inclusivity Mainstreaming}}}, - author = {Williams, Logan D. A. and Woodson, Thomas S.}, - year = {2019}, - month = may, - journal = {Minerva}, - issn = {0026-4695}, - doi = {10.1007/s11024-019-09375-4} -} - -@article{Williams2019a, - title = {Additive Manufacturing Standards for Space Resource Utilization}, - author = {Williams, Hunter and {Butler-Jones}, Evan}, - year = {2019}, - month = aug, - journal = {Additive Manufacturing}, - volume = {28}, - pages = {676--681}, - issn = {22148604}, - doi = {10.1016/j.addma.2019.06.007} -} - -@article{williamsCircularCitiesChallenges2019, - title = {Circular {{Cities}}: {{Challenges}} to {{Implementing Looping Actions}}}, - author = {Williams, Joanna}, - year = {2019}, - month = jan, - journal = {Sustainability}, - volume = {11}, - number = {2}, - pages = {423}, - publisher = {{MDPI AG}}, - issn = {2071-1050}, - doi = {10.3390/su11020423}, - urldate = {2021-03-28}, - abstract = {{$<$}p{$>$}Currently cities consume 60\textendash 80\% of natural resources globally. They produce 50\% of global waste and 75\% of green-house gas emissions. The UN estimates that 66\% of the world's population will live in cities by 2050 while the global urban footprint will triple over the years to 2030. Thus cities, as a system of production and consumption, threaten the environmental sustainability of the globe. Looping actions\textemdash reuse, recycling and recovery of resources (materials, energy, water, land and infrastructure)\textemdash can help to address resource scarcity and wastage in cities. However, there are many challenges to implementation. Much of the literature explores the challenges to looping actions within resource sectors and for specific actions (i.e., challenges to adaptive reuse of buildings, recycling of material waste, energy recovery from sewage). It often does so without any clear reference to context. Nexus solutions are becoming a popular resource looping response to tackling wastage in cities. Some of the challenges to implementation have been explored, but influence of context has not been investigated. In this paper we explore the challenges facing the implementation of looping actions in cities. Using a mixed methods approach, we identify 58 challenges to looping actions across eight themes. We also establish the challenges to implementing a nexus solution. The research identifies five common implementation challenges. Addressing these challenges could enable looping actions across resource types in cities. The research also demonstrates how context affects the challenges to implementing looping actions and nexus solutions in cities. Nevertheless, the analysis suggests that there are some common levers for promoting looping actions and nexus solutions in cities, regardless of context.{$<$}/p{$>$}}, - keywords = {Circular cities,Circular economy,Nexus: recycle,Resource looping,Resource management,Reuse and energy recovery,Urban sustainability}, - file = {/Users/fabio/Zotero/storage/6JZ8LID5/full-text.pdf} -} - -@inproceedings{Wilson, - title = {Utility of {{Additive Manufacturing}} on {{Martian Analogs}} and {{Manned Mars Missions Zak Wilson}}}, - author = {Wilson, Zak}, - pages = {1--13}, - keywords = {3d printing,abbreviations,acronyms,additive manufacturing,analog,and,hawai'i space exploration analog,hi-seas,in-space manufacturing,mars}, - file = {/Users/fabio/Zotero/storage/K6DFS9ZR/utility of additive manufacturing on martian analogs and manned mars missions.pdf} -} - -@article{wilsonPotentialClimateBenefits2020, - title = {Potential {{Climate Benefits}} of {{Digital Consumer Innovations}}}, - author = {Wilson, Charlie and Kerr, Laurie and Sprei, Frances and Vrain, Emilie and Wilson, Mark}, - year = {2020}, - month = oct, - journal = {Annual Review of Environment and Resources}, - volume = {45}, - number = {1}, - publisher = {{Annual Reviews}}, - issn = {1543-5938}, - doi = {10.1146/annurev-environ-012320-082424}, - urldate = {2020-10-28}, - abstract = {Digitalization has opened up a wealth of new goods and services with strong consumer appeal alongside potential emission-reduction benefits. Examples range from shared, on-demand electric mobility and peer-to-peer trading of electricity, food, and cars to grid-responsive smart appliances and heating systems. In this review, we identify an illustrative sample of 33 digital consumer innovations that challenge emission-intensive mainstream consumption practices in mobility, food, homes, and energy domains. Across these domains, digital innovations offer consumers a range of potentially appealing attributes from control, choice, and convenience to independence, interconnectedness, and integration with systems. We then compile quantitative estimates of change in activity, energy, or emissions as a result of consumers adopting digital innovations. This novel synthesis of the evidence base shows clear but variable potential emission-reduction benefits of digital consumer innovations. However, a small number of studies show emission increases from specific innovations as a result of induced demand or substitution effects that need careful management by public policy. We also consider how concurrent adoption of digital consumer innovations across mobility, food, homes, and energy domains can cause broader disruptive impacts on regulatory frameworks, norms, and infrastructures. We conclude by arguing for the importance of public policy in steering the digitalization of consumer goods and services toward low-carbon outcomes.Expected final online publication date for the Annual Review of Environment and Resources, Volume 45 is October 19, 2020. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.}, - keywords = {climate change,consumers,digital innovations,energy,food,homes,mobility}, - file = {/Users/fabio/Zotero/storage/UN4F6LDK/full-text.pdf} -} - -@article{wimanFindingHighimpactIntervention2023, - title = {Finding High-Impact Intervention Points for Plastic Recycling Using an Exploratory Stock-Flow Model}, - author = {Wiman, Henri and Siltaloppi, Jaakko and Leinonen, Anna}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - pages = {136396}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136396}, - urldate = {2023-02-13}, - abstract = {With the growing impetus to increase the recycling of plastic waste, a more detailed understanding of the impact of different interventions on improving material circulation in the plastic value chain is needed. This paper uses an exploratory stock-flow modeling approach to analyze the impact potential of critical intervention points and their combinations for increasing circularity and reducing linearity in the Finnish plastic recycling system. The results show that interventions at all our selected intervention points\textemdash demand, collection, sorting, and processing\textemdash are needed to reach the best outcomes in terms of linear material flows. With uncertainty regarding international flows, collection- and sorting-targeting actions are most effective in avoiding the most pessimistic circularity outcomes, whereas demand- and capacity-targeting interventions have the potential to achieve the best optimistic circularity outcomes. The results contribute to previous research on plastic recycling by improving understanding of the critical bottlenecks and synergistic effects of supply- and demand-side interventions, as well as by supporting policy and industrial decision-making by drawing attention to effective combinations of interventions under uncertainty. The analysis also highlights how the coarse resolution structure of the material flow system governs the impact potential of intervention points, while many system parameters are less significant.}, - langid = {english}, - keywords = {Circular economy,Plastic recycling,Recycling systems,Stock-flow modeling}, - file = {/Users/fabio/Zotero/storage/NNCD2BJZ/Wiman et al_2023_Finding high-impact intervention points for plastic recycling using an.pdf;/Users/fabio/Zotero/storage/JHLF7FER/S0959652623005541.html} -} - -@article{Winans2021, - title = {Journal {{Pre-proof Sustainable Value Mapping}} and {{Analysis Methodology}}: {{Enabling}} Stakeholder Participation to Develop Localized Indicators Mapped to Broader {{Sustainable Development Goals}}}, - author = {Winans, Kiara and Dlott, Franklin and Harris, Eric and Dlott, Jeff}, - year = {2021}, - doi = {10.1016/j.jclepro.2021.125797}, - urldate = {2021-01-13}, - file = {/Users/fabio/Zotero/storage/NTWQ35ND/Winans et al. - 2021 - Journal Pre-proof Sustainable Value Mapping and Analysis Methodology Enabling stakeholder participation to develo.pdf} -} - -@article{winansHistoryCurrentApplications2017, - title = {The History and Current Applications of the Circular Economy Concept}, - author = {Winans, K. and Kendall, A. and Deng, H.}, - year = {2017}, - month = feb, - journal = {Renewable and Sustainable Energy Reviews}, - volume = {68}, - pages = {825--833}, - publisher = {{Elsevier Ltd}}, - issn = {18790690}, - doi = {10.1016/j.rser.2016.09.123}, - urldate = {2022-03-13}, - abstract = {The challenges of balancing industrial development, environmental and human health, and economic growth in China and elsewhere in the world are drivers for recent resource use and low-carbon development strategies that include the application of the circular economy (CE) concept. A central theme of the CE concept is the valuation of materials within a closed-looped system with the aim to allow for natural resource use while reducing pollution or avoiding resource constraints and sustaining economic growth. The objectives of this study are (1) to review the history of the CE concept to provide a context for (2) a critical examination of how it is applied currently. Thematic categories are used to organize the literature review results including policy instruments and approaches; value chains, material flows, and products; and technology, organizational, and social innovation. The literature review illustrates the variability in CE project success and failure over time and by region. CE successes, key challenges, and research gaps are identified. The literature review results provide useful information for researchers as well as multi-stakeholder groups who seek to define the CE concept in practical terms, and to consider potential challenges and opportunities it presents when implemented.}, - keywords = {Closed-loop,Industrial ecology,Industrial symbiosis,Material flow,Resource use,Waste management} -} - -@article{wineCaseStudyUnpacking2022, - title = {A Case Study Unpacking the Collaborative Research Process: {{Eight}} Essential Components}, - author = {Wine, Osnat and Spiers, Jude and Kovacs Burns, Katharina and {van Manen}, Michael and Osornio Vargas, A.}, - year = {2022}, - month = may, - journal = {Environmental Science \& Policy}, - volume = {131}, - pages = {209--220}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.02.006}, - urldate = {2022-03-08}, - abstract = {Addressing complex environmental and health questions requires research collaborations. Such collaborations harness diverse expertise and perspectives from various researchers, practitioners, stakeholders, and knowledge-users to ground and enhance the depth and breadth of research and promote translational efforts towards policymaking. There is growing interest and need to understand what shapes these partnerships. Thus, our objective was to empirically identify the essential components of a collaborative research process. This qualitative case study followed a complex interdisciplinary research project over five years of operation. The project utilized an Integrated Knowledge Translation approach (IKT), a research partnership between researchers and knowledge-users. Data were generated through experiential interview/focus groups, surveys, and participant observation analyzed using inductive thematic analysis procedures. We identified eight essential components. The partnership evolved by building relationships, advancing individual growth, and building team capacity. These require the alignment of progress, knowledge, and expectations, establishing trust in each other, procedures, and outcomes, and developing shared ownership. Furthermore, operative elements and individual attitudes fostered the collaborative climate evolution. All components contributed directly and indirectly through complex interactions to shaping and maintaining the collaborative process and ultimately to growth, performance, co-production, and translational initiatives. At different times, the attainment or absence of these components facilitated or hindered the project's progression. This study provides an empiric in-depth description of the evolution of individual and collaborative team processes in which interdisciplinarity and IKT fostered co-production and knowledge translation. The evidence can serve as focal points to guide future planning and operation of research partnerships in different contexts.}, - keywords = {Environmental health,Integrated knowledge translation,Interdisciplinary,Qualitative research,Team science,Transdisciplinary} -} - -@article{Winn2013, - title = {Business, {{Ecosystems}}, and {{Biodiversity}}: {{New Horizons}} for {{Management Research}}}, - author = {Winn, Monika I and Pogutz, Stefano}, - year = {2013}, - journal = {Organization and Environment}, - volume = {26}, - number = {2}, - pages = {203--229}, - issn = {10860266}, - doi = {10.1177/1086026613490173}, - urldate = {2021-08-24}, - abstract = {Whether to secure critical resource inputs or responding to demands ranging from local communities to international stakeholders, leading multinational companies increasingly engage in ecosystem management by developing operations models with biodiversity, ecosystem conservation, and ecosystem restoration in mind-often in partnership with international conservation organizations. While promising to infuse business strategy with knowledge from natural science, specifically ecology, the emerging practice appears well ahead of research in this area. This article aims to encourage research into how organizations can manage their relationship with the natural environment so as not to destroy the very life-supporting foundations provided by nature. Bridging knowledge domains, the article introduces key concepts from ecology and social ecology to organization and management studies-ecosystems, biodiversity, ecosystem services, and ecological resilience. We illustrate these concepts with advances in ecosystems management and conclude with suggestions for future research in sustainability management, organization theory, and strategic management. \textcopyright{} 2013 SAGE Publications.}, - keywords = {biodiversity,corporate environmental management,corporate sustainability,ecological resilience,ecosystem services,ecosystems,interconnectedness,nature conservation,organization theory,strategic management}, - file = {/Users/fabio/Zotero/storage/XRYCGSYT/full-text.pdf} -} - -@article{Wippermann2020, - title = {Electrical Energy and Material Efficiency Analysis of Machining, Additive and Hybrid Manufacturing}, - author = {Wippermann, A. and Gutowski, T.G. and Denkena, B. and Dittrich, M.-A. and Wessarges, Y.}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {251}, - pages = {119731}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.119731} -} - -@article{Wiprachtiger2021, - title = {Waste Not, Want Not \textendash{} Ambiguities around Waste and Waste Prevention}, - author = {Wipr{\"a}chtiger, Maja and Haupt, Melanie and Rapp, Martina and Hellweg, Stefanie}, - year = {2021}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {173}, - pages = {105742}, - publisher = {{Elsevier BV}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105742}, - urldate = {2021-07-05}, - file = {/Users/fabio/Zotero/storage/5SUVTB29/full-text.pdf} -} - -@article{Wischnevsky2011, - title = {Influence of Environmental Factors and Prior Changes on the Organizational Adoption of Changes in Products and in Technological and Administrative Processes}, - author = {Wischnevsky, J. Daniel and Damanpour, Fariborz and M{\'e}ndez, Francis A.}, - year = {2011}, - month = mar, - volume = {22}, - number = {1}, - pages = {132--149}, - issn = {10453172}, - doi = {10.1111/j.1467-8551.2010.00700.x} -} - -@article{wishartZeroWasteGovernance2020, - title = {Zero Waste Governance: {{A Scottish}} Case Study}, - author = {Wishart, Lucy J. and Bebbington, Jan}, - year = {2020}, - journal = {International Journal of Sustainable Development}, - volume = {23}, - number = {1-2}, - pages = {128--147}, - publisher = {{Inderscience Publishers}}, - issn = {09601406}, - doi = {10.1504/IJSD.2020.112180}, - urldate = {2022-03-13}, - abstract = {This paper offers an account of how zero waste governance 'works' in Scotland. Zero waste has been widely adopted by governments as a policy goal; yet, the term remains equivocal. Using Scotland as a case study, this paper investigates how zero waste is understood and pursued as a policy goal within a national context and how socio-political factors shape zero waste governance. Providing the first academic study of waste governance in Scotland, the paper introduces key actors, initiatives and objectives from zero waste policy documents. Using conceptual insights from waste governance research, the paper identifies the importance of boundary organisations, networks, existing institutions, expertise, and stakeholder engagement in shaping the zero waste policy in Scotland. Through these concepts, the paper presents an account of how zero waste governance works in Scotland and offers potential themes to further zero waste governance research.}, - keywords = {Scotland,Waste governance,Zero waste} -} - -@article{Witherell2014, - title = {Toward {{Metamodels}} for {{Composable}} and {{Reusable Additive Manufacturing Process Models}}}, - author = {Witherell, Paul and Feng, Shaw and Simpson, Timothy W and Saint John, David B. and Michaleris, Pan and Liu, Zi-Kui and Chen, Long-qing and Martukanitz, Rich}, - year = {2014}, - month = oct, - journal = {Journal of Manufacturing Science and Engineering}, - volume = {136}, - number = {6}, - pages = {061025}, - issn = {1087-1357}, - doi = {10.1115/1.4028533}, - keywords = {additive manufacturing,metamodel,physics-based models,process models}, - file = {/Users/fabio/Zotero/storage/S5RIJH3B/Witherell et al. - 2014 - Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models.pdf} -} - -@article{Wittbrodt2011, - title = {Distributed Manufacturing with 3-{{D}} Printing: A Case Study of Recreational Vehicle Solar Photovoltaic Mounting Systems}, - author = {Wittbrodt, Ben and Laureto, John and Tymrak, Brennan and Pearce, Joshua M}, - year = {2011}, - journal = {Journal of Frugal Innovation}, - pages = {1--7}, - publisher = {{Journal of Frugal Innovation}}, - issn = {2197-7917}, - doi = {10.1186/s40669-014-0001-z}, - abstract = {For the first time, low-cost open-source 3-D printing provides the potential for distributed manufacturing at the household scale of customized, high-value, and complex products. To explore the potential of this type of ultra-distributed manufacturing, which has been shown to reduce environmental impact compared to conventional manufacturing, this paper presents a case study of a 3-D printable parametric design for recreational vehicle (RV) solar photovoltaic (PV) racking systems. The design is a four-corner mounting device with the ability to customize the tilt angle and height of the standoff. This enables performance optimization of the PV system for a given latitude, which is variable as RVs are geographically mobile. The open-source 3-D printable designs are fabricated and analyzed for print time, print electricity consumption, mechanical properties, and economic costs. The preliminary results show distributed manufacturing of the case study product results in an order of magnitude reduction in economic cost for equivalent products. In addition, these cost savings are maintained while improving the functionality of the racking system. The additional electrical output for a case study RV PV system with improved tilt angle functionality in three representative locations in the U.S. was found to be on average over 20\% higher than that for conventional mass-manufactured racking systems. The preliminary results make it clear that distributed manufacturing -even at the household level -with open-source 3-D printers is technically viable and economically beneficial. Further research is needed to expand the results of this preliminary study to other types of products.}, - keywords = {3-D printing,Additive manufacturing Background,Distributed manufacturing,Frugal innovation,Household manufacturing,Open-source,Photovoltaic,Racking,Transportation energy}, - file = {/Users/fabio/Zotero/storage/IQHXWCBC/Distributed manufacturing with 3-D printing a case study of recreational vehicule solar photovoltaic mounting systems (2015).pdf} -} - -@article{Wittbrodt2013, - title = {Life-Cycle Economic Analysis of Distributed Manufacturing with Open-Source 3-{{D}} Printers}, - author = {Wittbrodt, B.T. and Glover, A.G. and Laureto, J and Anzalone, G.C. and Oppliger, D and Irwin, J.L. and Pearce, J.M.}, - year = {2013}, - month = sep, - journal = {Mechatronics}, - volume = {23}, - number = {6}, - pages = {713--726}, - publisher = {{Elsevier Ltd}}, - issn = {09574158}, - doi = {10.1016/j.mechatronics.2013.06.002}, - urldate = {2013-11-07}, - abstract = {The recent development of open-source 3-D printers makes scaling of distributed additive-based manu- facturing of high-value objects technically feasible and offers the potential for widespread proliferation of mechatronics education and participation. These self-replicating rapid prototypers (RepRaps) can manu- facture approximately half of their own parts from sequential fused deposition of polymer feedstocks. RepRaps have been demonstrated for conventional prototyping and engineering, customizing scientific equipment, and appropriate technology-related manufacturing for sustainable development. However, in order for this technology to proliferate like 2-D electronic printers have, it must be economically viable for a typical household. This study reports on the life-cycle economic analysis (LCEA) of RepRap technol- ogy for an average US household. A new low-cost RepRap is described and the costs of materials and time to construct it are quantified. The economic costs of a selection of 20 open-source printable designs (rep- resenting less than 0.02\% of those available), are typical of products that a household might purchase, are quantified for print time, energy, and filament consumption and compared to low and high Internet mar- ket prices for similar products without shipping costs. The results show that even making the extremely conservative assumption that the household would only use the printer to make the selected 20 products a year the avoided purchase cost savings would range from about \$300 to \$2000/year. Assuming the 25 h of necessary printing for the selected products is evenly distributed throughout the year these savings provide a simple payback time for the RepRap in 4 months to 2 years and provide an ROI between {$>$}200\% and {$>$}40\%. As both upgrades and the components that are most likely to wear out in the RepRap can be printed and thus the lifetime of the distributing manufacturing can be substantially increased the unavoidable conclusion from this study is that the RepRap is an economically attractive investment for the average US household already. It appears clear that as RepRaps improve in reliability, continue to decline in cost and both the number and assumed utility of open-source designs continues growing expo- nentially, open-source 3-D printers will become a mass-market mechatronic device}, - keywords = {3-D printing,Additive-layer manufacturing,Distributed manufacturing,Open-source hardware,Rapid prototyping,RepRap}, - file = {/Users/fabio/Zotero/storage/6AWB2R4B/Wittbrodt et al. - 2013 - Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers.pdf} -} - -@article{Wittbrodt2015, - title = {The Effects of {{PLA}} Color on Material Properties of 3-{{D}} Printed Components}, - author = {Wittbrodt, Ben and Pearce, Joshua M.}, - year = {2015}, - month = oct, - journal = {Additive Manufacturing}, - volume = {8}, - number = {October 2015}, - pages = {110--116}, - issn = {22148604}, - doi = {10.1016/j.addma.2015.09.006}, - abstract = {As the number of prosumer printers has expanded rapidly, they now make up the majority of the 3-D printer market and of these printers those in the open-source lineage of the RepRap also have expanded to dominate. Although still primarily used for prototyping or hobbyist production of low-value products, the RepRap has the capacity to be used for high-value distributed manufacturing. A recent study found that RepRap printed parts printed in realistic environmental conditions can match and even out perform commercial 3-D printers using proprietary FDM in terms of tensile strength with the same polymers. However, tensile strengths of the large sample set of RepRap prints fluctuated. In order to explain that fluctuation and better inform designers on RepRap print properties this study determines the effect of color and processing temperature on material properties of Lulzbot TAZ deposited PLA in various colors. Five colors (white, black, blue, gray, and natural) of commercially available filament processed from 4043D PLA is tested for crystallinity with XRD, tensile strength following ASTM D638 and the microstructure is evaluated with environmental scanning electron microscope. Results are presented showing a strong relationship between tensile strength and percent crystallinity of a 3-D printed sample and a strong relationship between percent crystallinity and the extruder temperature. Conclusions are drawn about the effects of color and processing temperature on the material properties of 3-D printed PLA to promote the open-source development of RepRap 3-D printing.}, - keywords = {Crystallinity,Distributed manufacturing,Mechanical properties,Plastic color,RepRap}, - file = {/Users/fabio/Zotero/storage/GJM2PS9F/Wittbrodt, Pearce - 2015 - The effects of PLA color on material properties of 3-D printed components.pdf} -} - -@article{Wittbrodt2015a, - title = {Open-Source Photometric System for Enzymatic {{Nitrate}} Quantification}, - author = {Wittbrodt, B. T. and Squires, D. A. and Walbeck, J. and Campbell, E. and Campbell, W. H. and Pearce, J. M.}, - year = {2015}, - journal = {PLoS ONE}, - volume = {10}, - number = {8}, - pages = {1--17}, - issn = {19326203}, - doi = {10.1371/journal.pone.0134989}, - abstract = {Nitrate, the most oxidized form of nitrogen, is regulated to protect people and animals from harmful levels as there is a large over abundance due to anthropogenic factors. Widespread field testing for nitrate could begin to address the nitrate pollution problem, however, the Cadmium Reduction Method, the leading certified method to detect and quantify nitrate, demands the use of a toxic heavy metal. An alternative, the recently proposed Environmental Protection Agency Nitrate Reductase Nitrate-Nitrogen Analysis Method, eliminates this problem but requires an expensive proprietary spectrophotometer. The development of an inexpensive portable, handheld photometer will greatly expedite field nitrate analysis to combat pollution. To accomplish this goal, a methodology for the design, development, and technical validation of an improved open-source water testing platform capable of performing Nitrate Reductase Nitrate-Nitrogen Analysis Method. This approach is evaluated for its potential to i) eliminate the need for toxic chemicals in water testing for nitrate and nitrite, ii) reduce the cost of equipment to perform this method for measurement for water quality, and iii) make the method easier to carryout in the field. The device is able to perform as well as commercial proprietary systems for less than 15\% of the cost for materials. This allows for greater access to the technology and the new, safer nitrate testing technique.}, - isbn = {1932-6203}, - pmid = {26244342}, - file = {/Users/fabio/Zotero/storage/MKWIPXF5/Open-Source Photometric System for Enzymatic Nitrate Quantification (2015).pdf} -} - -@article{wittDoesSustainabilitypromotingPolicy2021, - title = {Does Sustainability-Promoting Policy Making Reduce Our Welfare?}, - author = {Witt, Ulrich}, - year = {2021}, - month = oct, - journal = {Ecological Economics}, - volume = {188}, - pages = {107130}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107130}, - urldate = {2021-06-20} -} - -@article{Witte2016, - title = {Facilitating Start-Ups in Port-City Innovation Ecosystems: {{A}} Case Study of {{Montreal}} and {{Rotterdam}}}, - author = {Witte, Patrick and Slack, Brian and Keesman, Maarten and Jugie, Jeanne H??l??ne and Wiegmans, Bart}, - year = {2016}, - journal = {Journal of Transport Geography}, - publisher = {{Elsevier Ltd}}, - issn = {09666923}, - doi = {10.1016/j.jtrangeo.2017.03.006}, - abstract = {Facilitating start-ups located in the port-city interface is one of the current policy strategies of municipalities in many port-cities worldwide to encourage innovations in constantly evolving port areas. This could help the re-development of vacant ex-port land, while also offering new economic orientations for the city and the port. The aim of the paper is therefore to explore what conditions are needed to facilitate and encourage start-ups in innovation ecosystems in the port-city interface. The analysis is based on two in-depth case studies of the port-cities of Montreal (Canada) and Rotterdam (the Netherlands). The results indicate that government initiatives to actively facilitate start-ups in formerly industrialized port areas are quite successful. However, the functional linkages between start-ups and port activities remains rather limited, if not entirely absent, and the impact on the functioning of the innovation ecosystem at large is not substantial. Other factors such as capital, collaboration and proximity are valued more than the physical location of the start-up. In this, other actors in the ecosystem besides the municipality and the port authority also play a key role. Furthermore, start-ups often feel limited in their innovative capacity because of stringent regulations and institutional rigidness. Governments and port authorities could facilitate in this respect by working more demand-driven in terms of unburdening and creating more institutional support, instead of imposing top-down rules and regulations to try to govern the ecosystem, which in itself can be considered a contradiction in terms.}, - keywords = {Governance,Innovation ecosystems,Port-city interface,Stakeholders,Start-ups} -} - -@article{Woern2017, - title = {Distributed {{Manufacturing}} of {{Flexible Products}}: {{Technical Feasibility}} and {{Economic Viability}}}, - author = {Woern, Aubrey and Pearce, Joshua}, - year = {2017}, - month = oct, - journal = {Technologies}, - volume = {5}, - number = {4}, - pages = {71}, - issn = {2227-7080}, - doi = {10.3390/technologies5040071}, - isbn = {1906487146}, - keywords = {10,3-d printing,3390,5,71,additive manufacturing,com,consumer,distributed manufacturing,doi,economics,flexible materials,journal,mdpi,open-source,technologies,technologies 2017,technologies5040071,thermoplastic elastomer,thermoplastic polyurethane,www}, - file = {/Users/fabio/Zotero/storage/9MG5GBRY/Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability.pdf} -} - -@article{Woern2018, - title = {Fused {{Particle Fabrication}} 3-{{D Printing}}: {{Recycled Materials}}' {{Optimization}} and {{Mechanical Properties}}}, - author = {Woern, Aubrey and Byard, Dennis and Oakley, Robert and Fiedler, Matthew and Snabes, Samantha and Pearce, Joshua}, - year = {2018}, - month = aug, - journal = {Materials}, - volume = {11}, - number = {8}, - pages = {1413}, - issn = {1996-1944}, - doi = {10.3390/ma11081413}, - abstract = {Fused particle fabrication (FPF) (or fused granular fabrication (FGF)) has potential for increasing recycled polymers in 3-D printing. Here, the open source Gigabot X is used to develop a new method to optimize FPF/FGF for recycled materials. Virgin polylactic acid (PLA) pellets and prints were analyzed and were then compared to four recycled polymers including the two most popular printing materials (PLA and acrylonitrile butadiene styrene (ABS)) as well as the two most common waste plastics (polyethylene terephthalate (PET) and polypropylene (PP)). The size characteristics of the various materials were quantified using digital image processing. Then, power and nozzle velocity matrices were used to optimize the print speed, and a print test was used to maximize the output for a two-temperature stage extruder for a given polymer feedstock. ASTM type 4 tensile tests were used to determine the mechanical properties of each plastic when they were printed with a particle drive extruder system and were compared with filament printing. The results showed that the Gigabot X can print materials 6.5\texttimes{} to 13\texttimes{} faster than conventional printers depending on the material, with no significant reduction in the mechanical properties. It was concluded that the Gigabot X and similar FPF/FGF printers can utilize a wide range of recycled polymer materials with minimal post processing.}, - file = {/Users/fabio/Zotero/storage/8J6898SR/Fused Particle Fabrication 3-D Printing- Recycled Materials’ Optimization and Mechanical Properties.pdf} -} - -@article{Woern2018a, - title = {{{RepRapable Recyclebot}}: {{Open}} Source 3-{{D}} Printable Extruder for Converting Plastic to 3-{{D}} Printing Filament}, - author = {Woern, Aubrey L and McCaslin, Joseph R. and Pringle, Adam M and Pearce, Joshua M}, - year = {2018}, - month = oct, - journal = {HardwareX}, - volume = {4}, - pages = {e00026}, - publisher = {{The Authors}}, - issn = {24680672}, - doi = {10.1016/j.ohx.2018.e00026}, - keywords = {3-D printing,Circular economy,Composites,Extruder,Fused filament fabrication,Materials science,Open hardware,open source hardware,Open source hardware,Plastic,Polymer composites,Polymers,Recyclebot,Recycling,RepRap,Upcycle,Waste plastic}, - file = {/Users/fabio/Zotero/storage/CPE7LCHR/RepRapable Recyclebot open source 3D printable extruder for converting plastic to 3D printing filament.pdf} -} - -@article{Woern2018b, - title = {3-{{D Printable Polymer Pelletizer Chopper}} for {{Fused Granular Fabrication-Based Additive Manufacturing}}}, - author = {Woern, Aubrey and Pearce, Joshua}, - year = {2018}, - month = nov, - journal = {Inventions}, - volume = {3}, - number = {4}, - pages = {78}, - issn = {2411-5134}, - doi = {10.3390/inventions3040078}, - abstract = {Although distributed additive manufacturing can provide high returns on investment, the current markup on commercial filament over base polymers limits deployment. These cost barriers can be surmounted by eliminating the entire process of fusing filament by three-dimensional (3-D) printing products directly from polymer granules. Fused granular fabrication (FGF) (or fused particle fabrication (FPF)) is being held back in part by the accessibility of low-cost pelletizers and choppers. An open-source 3-D printable invention disclosed here allows for precisely controlled pelletizing of both single thermopolymers as well as composites for 3-D printing. The system is designed, built, and tested for its ability to provide high-tolerance thermopolymer pellets with a number of sizes capable of being used in an FGF printer. In addition, the chopping pelletizer is tested for its ability to chop multi-materials simultaneously for color mixing and composite fabrication as well as precise fractional measuring back to filament. The US\$185 open-source 3-D printable pelletizer chopper system was successfully fabricated and has a 0.5 kg/h throughput with one motor, and 1.0 kg/h throughput with two motors using only 0.24 kWh/kg during the chopping process. Pellets were successfully printed directly via FGF as well as indirectly after being converted into high-tolerance filament in a recyclebot.}, - file = {/Users/fabio/Zotero/storage/XJ8KZTQ4/3-D Printable Polymer Pelletizer Chopper for Fused 2 Granular Fabrication-based Additive Manufacturing.pdf} -} - -@article{Wohlfahrt2019, - title = {Characteristics of Bioeconomy Systems and Sustainability Issues at the Territorial Scale. {{A}} Review}, - author = {Wohlfahrt, J. and Ferchaud, F. and Gabrielle, B. and Godard, C. and Kurek, B. and Loyce, C. and Therond, O.}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {232}, - pages = {898--909}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.385}, - abstract = {The bioeconomy is expected to be a key solution to supply societies with food and non-food products while replacing non-renewable resources and preserving natural ones. Sustainability of bioeconomy systems is currently an issue that has to be addressed. Current research dealing with the bioeconomy focuses primarily on technologies to improve biomass transformation and, with regard to sustainability, on simple and unitary bio-based value chains such as biofuel production from a single crop. In this paper, based on a literature review, we highlight the complexity of bioeconomy systems and propose a framework to support their sustainable development. We first review the key characteristics of bioeconomy systems: a wide variety of stakeholders with a limited vision of bioeconomy systems, flexibility but also rigidity of biomass feedstocks or transformation processes and a complex spatio-temporal layout. Drawing on sustainability science, we show the relevance of the social-ecological concept to approach territorial bioeconomy systems' sustainably and develop an analytical framework to address sustainable development of territorial (local/regional) bioeconomy systems. This framework is based on two complementary representations of territorial bioeconomy systems, used to decipher their complexity. Finally, we outline an integrated assessment and modelling approach designed to tackle specific bioeconomy sustainability issues. This participatory approach has to take into account: i) the different sub-systems of territorial bioeconomy systems, their high level of interactions, their heterogeneity in terms of entities and processes involved and the circularity of matter and energy (production, transformation, use and recycling) with particular emphasis on the transformation sub-system and the logistics ii) the multiplicity and flexibility of stakeholders' nature, strategies and concerns, iii) the variety of spatial and temporal scales at play; iv) the effects of exogenous drivers like supra-regional policies and regulations, markets (e.g. prices of energies and biomass-based products) and climate.}, - keywords = {Conceptual framework,Integrated assessment,Landscape scale,Social-ecological system,Territorial scale}, - file = {/Users/fabio/Zotero/storage/CYUQ26BM/Characteristics of bioeconomy systems and sustainability issues at the territorial scale A review.pdf} -} - -@article{woidaskyInorganicFluorescentMarker2020, - title = {Inorganic Fluorescent Marker Materials for Identification of Post-Consumer Plastic Packaging}, - author = {Woidasky, J{\"o}rg and Sander, Immo and Schau, Alexander and Moesslein, Jochen and Wendler, Pascal and Wacker, Dirk and Gao, Guojun and Kirchenbauer, Daniel and Kumar, Vinay and Busko, Dmitry and Howard, Ian A. and Richards, Bryce S. and Turshatov, Andrey and Wiethoff, Stefan and {Lang-Koetz}, Claus}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104976}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.104976}, - urldate = {2020-07-14}, - abstract = {Current plastic packaging waste management practices in Europe, but also in other countries require improvement due to legal and societal requirements. To meet high recycling rates, significant changes among others in post-consumer packaging waste sorting become necessary. This waste stream is dominated by plastic packaging. Inorganic fluorescent tracer materials (oxide crystals doped with ytterbium Yb3+ sensitizer ions and either erbium (Er3+), holmium (Ho3+) or thulium (Tm3+) activator ions) enable a sorting criterion which is independent of the properties of the packaging materials. The authors propose to use up-conversion fluorescence as a unique mean for polymer marking and product identification. To this end, PE-HD film samples, with 10, 100 and 1000 ppm of marker concentration in different polymer matrix colours (semi-transparent, yellow, green, and black) were irradiated with 980 nm diode laser radiation, with an excitation intensity up to 10 W/cm2. The performance of three different marker types with their maximum emission in green, red, and NIR was measured and assessed both with and without polymer matrix. Moreover, PE-HD sample bottles with tracers were tested, and a tracer regime for specific code generation for improved polymer identification is proposed.}, - keywords = {Post-consumer plastic packaging,Recycling,{Sorting, fluorescent markers},Up-conversion}, - file = {/Users/fabio/Zotero/storage/X66UR6XA/full-text.pdf} -} - -@book{Wolf2005, - title = {Techno-Economic Feasibility of Large-Scale Production of Bio-Based Polymers in {{Europe}}}, - author = {Wolf, O and Crank, M and Patel, M}, - year = {2005}, - journal = {European Communities}, - abstract = {For several decades, plastics derived from fossil fuels have grown at a faster rate than any other group of bulk materials, and expectations are that this high growth trend will continue until 2020. This study is motivated by the idea that bio-based plastics, being derived from renewable resources, could serve to offset to a certain extent the nonrenewable energy use and greenhouse gas emissions of the EU plastics industry, as well as having other advantageous socio-economic effects such as diversifying agricultural land use. An overview of the types of bio-based polymers, their producers (including their location), the production processes applied and the types of uses shows that bio-based polymers is an emerging field which is characterised by new synergies and collaborations. In order to obtain a better understanding of the importance of this emerging sector estimates have been made firstly for the technical substitution potential and then for more realistic production scenarios which implicitly take into account price differentials and other influencing factors. The technical substitution potential, which can be derived from the material property set of each bio-based polymer and its petrochemicalbased equivalent is estimated at 15.4 million tonnes for EU-15, or 33\% of the total current polymer production. A more detailed analysis taking into account economic, social, ecological and technological influencing factors relating to the bio-based polymer value chain leads to the identification of three scenarios: WITHOUT P\&M (policies and measures), WITH P\&M and HIGH GROWTH. In absolute terms, biobased polymers are projected to reach a maximum of 1 million tonnes by 2010 in the scenario WITHOUT P\&M and max. 1.75-3.0 million tonnes by 2020 in the scenarios WITH P\&M and HIGH GROWTH respectively. These (physical) amounts are equivalent to an estimated maximum (monetary) production volume of roughly 1-2 billion EUR by 2010 (scenarios WITH P\&M and HIGH GROWTH) and 3-6 billion EUR by 2020 (scenario HIGH GROWTH). While these are sizable quantities, they are modest compared to the expected production increase of petrochemical polymers by 12.5 million tonnes by 2010 and 25 million tonnes by 2020. Thus, the market share of bio-based polymers will remain very small, in the order of 1-2\% by 2010 and 1-4\% by 2020. This means that bio-based polymers will not provide a major challenge, nor present a major threat, to conventional petrochemical polymers. Energy and GHG emission savings from bio-based polymers in specific terms were found to be 20-50 GJ/t polymer and 1.0-4.0 t CO2eq/t polymer respectively (in Chapter 4.2.1). Bio-based polymers are thus very attractive in terms of specific energy and emissions savings. In absolute terms, savings are rather small: as a proportion of the total EU chemical industry, energy savings amount to 0.5-1.0\% by 2010, up to a maximum of 2.1\% by 2020; compared to the total EU economy the figures are 0.1\% until 2010 and 0.2\% until 2020 (Chapter 4.3.1). Greenhouse gas emissions savings amount to 1-2\% by 2010, up to a maximum of 5\% by 2020; compared to the total EU economy the figures are 0.1\% until 2010 and 0.2\% until 2020. Bio-based polymers therefore cannot offset the additional environmental burden due to the growth of petrochemical polymers (there is a gap of a factor of about 20 to 40). It is also out of the question that, within the next two decades, bio-based polymers will be able to meaningfully compensate for the environmental impacts of the economy as a whole. However, it is not unthinkable that the boundary conditions for bio-based polymers and the energy system will change dramatically in the decades after 2020, e.g. due to substantially higher oil prices. If, ceteris paribus, bio-based polymers would ultimately grow ten times beyond the HIGH GROWTH projection for 2020 (i.e., to about 30 million tonnes), this could avoid half of the chemical sector's current GHG emissions, without accounting for major technological progress (efficiencies, yields) in the decades after 2020. These considerations for the very long term do not justify any concrete (policy) action today, they are rather intended to demonstrate the implications of the comparatively low production volumes until 2020 (compare also per capita values in Table 3-7). The results of the calculations on land use requirements (Chapter 4.3.1) show that by 2010 a maximum of 125,000 ha may be used for bio-based polymers in Europe and by 2020 an absolute maximum of 975,000 ha (High Growth Scenario). Comparing this with total land use in EU15 for various purposes, shows that if all bio-based polymers were to be produced from wheat, land requirements as a percentage of total land used to grow wheat range from 1\% WITH P\&M to 5\% in the case of HIGH GROWTH. As a proportion of total cereals these figures are a factor 2 lower. Compared to total set-aside land (1997 values), the percentage of land required ranges from 3.6\% to 15.4\%; as a percentage of industrial crops the range is similar. Bio-based polymers are thus seen to have modest land requirements and will not cause any strain within the EU on agricultural land requirements in the near future. As a consequence the employment potential in the agricultural sector is also very limited until 2020. The assessment of the environmental impacts at the EU level is based on assumptions about the implementation of advanced technology (with lower environmental impact) and on the projections just discussed. At this early stage of development of bio-based polymers, many impacts which are likely to be significant cannot yet be assessed; other impact categories will only be identified as the transition from petroleum-based polymers to bio-based polymers progresses. The choice of reference product (1 tonne bulk polymer) and simplifying assumptions made in relation to the system boundaries do not allow for all end products to be taken into account; nor for all combinations of factors including locality, time, modes of transportation used and waste treatment technologies employed. The assessment of the environmental impacts is thus subject to large uncertainties. However, this uncertainty is inevitable since it is not feasible to account for all possible combinations of materials, end products and waste management, which, ideally, would need to be weighted with their respective future penetration rates. To develop a deeper understanding of the possible effects of policies and measures (P\&Ms) the society's willingness to pay for green electricity (from biomass) is translated to bio-based polymers; a level of 0.1-0.2 EUR per kg of bio-based polymer is found. It is concluded that this level of financial support would help to improve the competitiveness of bio-based polymers. A thorough discussion about the effects of P\&Ms would actually require a comprehensive overview of all existing fiscal measures and subsidies. A first attempt is made to quantify the effect related to the tax exemptions for the feedstock use of fossil fuels. According to our rough estimates this leads to an equivalent of 0.10 to 0.15 EUR/kg polymer, which \textendash{} if verified \textendash{} would have a number of important implications. The interviews and workshop held within the scope of this project also showed that it is not sufficient simply to lower the cost of bio-based polymers production and facilitate their market introduction. It is equally important to accompany this with R\&D activities in the field of polymer processing: Processors also must have access to the relevant additives which should be biodegradable, in order for the biopolymer to be fully biodegradable (examples given: dyes, anti-static additives). The report ends with an overview of relevant P\&Ms including brief explanations of the experience made to date in the EU and elsewhere. Finally, recent developments in policy making at the EU level are reported.}, - isbn = {92-79-01230-4}, - file = {/Users/fabio/Zotero/storage/DT2IJSVY/Techno-economic feasibility of large-scale production of bio-based polymers in Europe.pdf} -} - -@article{wolfDecisionTheatreTriangle2023, - title = {The {{Decision Theatre Triangle}} for Societal Challenges \textendash{} {{An}} Example Case and Research Needs}, - author = {Wolf, Sarah and F{\"u}rst, Steffen and Geiges, Andreas and Laublichler, Manfred and Mielke, Jahel and Steudle, Gesine and Winter, Konstantin and Jaeger, Carlo}, - year = {2023}, - month = feb, - journal = {Journal of Cleaner Production}, - pages = {136299}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136299}, - urldate = {2023-02-12}, - abstract = {Tackling societal challenges relating to sustainability requires both an understanding of the underlying complex socio-ecological systems and participation of scientists as well as relevant stakeholders, such as practice experts, decision makers, and citizens. This paper introduces the Decision Theatre Triangle, a method which combines empirical information, mathematical modelling and simulation, and a format for dialogue between scientists and stakeholders. While it builds on previous Decision Theatre work, the new structuring into these three elements emphasizes what is needed for setting up a Decision Theatre for a given challenge. Based on experience with a specific example \textendash{} sustainable mobility in Germany \textendash{} it is argued that agent-based models are particularly suitable for Decision Theatres and that the method is useful not only for decision support but also for science communication and co-creation of a deeper knowledge of the system under discussion. As a step towards facilitating a broader use of the Decision Theatre Triangle method, the paper then sketches research needs for each of its three elements, with a focus on mathematical modelling and simulation.}, - langid = {english}, - keywords = {Agent-based modelling,Co-production of research,Decision support,Decision Theatre,Science communication}, - file = {/Users/fabio/Zotero/storage/HK55QMQI/Wolf et al_2023_The Decision Theatre Triangle for societal challenges – An example case and.pdf;/Users/fabio/Zotero/storage/BCKX5SUQ/S0959652623004572.html} -} - -@article{wolffNaturebasedSolutionsInformal2023, - title = {Nature-Based Solutions in Informal Settlements: {{A}} Systematic Review of Projects in {{Southeast Asian}} and {{Pacific}} Countries}, - shorttitle = {Nature-Based Solutions in Informal Settlements}, - author = {Wolff, Erich and Rauf, Hanna A. and Hamel, Perrine}, - year = {2023}, - month = jul, - journal = {Environmental Science \& Policy}, - volume = {145}, - pages = {275--285}, - issn = {1462-9011}, - doi = {10.1016/j.envsci.2023.04.014}, - urldate = {2023-05-11}, - abstract = {Nature-based solutions (NbS) have gained traction in Southeast Asia and the Pacific region over the last decade. While the benefits of NbS are established for most urban contexts, more research is necessary to examine the potential of these solutions in the Global South, particularly in historically disadvantaged contexts such as informal settlements. Responding to this gap, we analyse both grey and academic sources to examine past NbS projects in informal settlements in Southeast Asian and Pacific countries. We identified six main types of NbS that are used to address various social, ecological, and cultural challenges in informal settlements. Some NbS are different from those described in the Global North, ranging from the use of traditional community gardens to enhance food security to the implementation of constructed wetlands as wastewater treatment systems. NbS in the region are often framed as grassroots initiatives spearheaded by local communities or as technical systems implemented within ``upgrading programs'' delivered by multilateral banks, researchers or international organisations. Analysing the motivations behind these projects, we provide insights into which systems have been used in response to specific needs such as efforts to promote climate adaptation, support food security or compensate residents for disruptions. We outline important social and political implications of the implementation of NbS still understudied in the literature, such as the framing of NbS as ``placeholders'' for future development or as ``compensation'' for the disruptions caused by resettlement projects.}, - langid = {english}, - keywords = {Ecosystem services,Green infrastructure,Informal settlement upgrading,Informal Settlements,Nature-based solutions,Southeast Asia and Pacific}, - file = {/Users/fabio/Zotero/storage/UQY9BNEM/Wolff et al. - 2023 - Nature-based solutions in informal settlements A .pdf;/Users/fabio/Zotero/storage/22RWE5XL/S1462901123001156.html} -} - -@article{wollmannProposalModelHierarchize2019, - title = {Proposal for a Model to Hierarchize Strategic Decisions According to Criteria of Value Innovation, Sustainability and Budgetary Constraint}, - author = {Wollmann, Dewey and Tortato, Ubirat{\~a}}, - year = {2019}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {231}, - pages = {278--289}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.05.190}, - urldate = {2020-06-18}, - abstract = {Organizations need management models, which will enable their executives to develop systemic thinking. In addition, executives should keep in mind that: some decision-making processes should be shared; impose political influence according to their preferences; value innovation strategies may be present; it is essential to consider the environmental, economic and social dimensions of sustainability. In this context, this study describes a model to hierarchize strategic decisions according to criteria innovation value, sustainability and budgetary constraint, developed according to the methodology proposed by Mitroff et al. (1974). In addition to hierarchizing, the model allows identifying the degree of importance of each of the strategic decisions in the performance indicators defined as evaluation criteria and sub-criteria. In the conceptualization phase, the model is influenced by concepts that describe complex adaptive systems. Next, the Analytic Network Process with Benefits, Opportunities, Costs and Risks Analysis and Linear Programming techniques are used in order to define the mathematical structure that operationalizes the model. The use of a hypothetical example demonstrates the capacity of the model proposed in this work to support the decision-making process of an organization in the selection of its decision alternatives. Thus, the model can help the academic and business communities concerned with the progress of sustainable societies, insofar as it subsidizes decision-making for the development and implementation of new products and processes related to cleaner production.}, - keywords = {Analytic network process,BOCR analysis,Complex adaptive systems,Linear programming} -} - -@article{Wolszczak2018, - title = {Heat Distribution in Material during Fused Deposition Modelling}, - author = {Wolszczak, Piotr and Lygas, Krystian and Paszko, Mateusz and Wach, Radoslaw A.}, - year = {2018}, - month = apr, - journal = {Rapid Prototyping Journal}, - volume = {24}, - number = {3}, - pages = {615--622}, - publisher = {{Emerald Group Publishing Ltd.}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-04-2017-0062}, - urldate = {2021-01-15}, - abstract = {Purpose: The paper aims to investigate the problem of heat distribution in FDM 3D printing. The temperature distribution of the material is important because of the occurrence of shrinkage and crystallization phenomena that affect the dimensional accuracy and strength of the material. Design/methodology/approach: The study uses a thermoplastic material (polylactide) and a test stand equipped with a 3D printer adapted to perform thermographic observations. The main source of heat in the study was a molten laminate material and a hot-end head. Findings: When the material is molten at the temperature of 190\textdegree C, the temperature of a previous layer increases above the glass transition point (Tg = 64.8\textdegree C) and reaches to about 80\textdegree C. In addition, at the boundary of the layers, there occurs a permanent bonding of the consecutive layers because of their partial melting. The paper also reports the results of porosity of PLA samples printed at the temperature ranging between 205 and 255\textdegree C. The degree of porosity depends on the temperature of the extruded material. Practical implications: The results may be helpful for designers of various printed parts and construction engineers of printing heads and 3D printer chambers. Originality/value: Thermograms of material layers with a height of 0.3 mm are obtained using a thermal imaging camera with a lens for macro magnification (43 pixels/mm).}, - keywords = {3D printing,FDM,Heat,Thermoplastic polymers} -} - -@article{Wong2012, - title = {A {{Review}} of {{Additive Manufacturing}}}, - author = {Wong, Kaufui V. and Hernandez, Aldo}, - year = {2012}, - journal = {ISRN Mechanical Engineering}, - volume = {2012}, - pages = {1--10}, - issn = {2090-5130}, - doi = {10.5402/2012/208760}, - urldate = {2013-05-24}, - abstract = {Additive manufacturing processes take the information from a computer-aided design (CAD) file that is later converted to a stereolithography (STL) file. In this process, the drawing made in the CAD software is approximated by triangles and sliced containing the information of each layer that is going to be printed. There is a discussion of the relevant additive manufacturing processes and their applications. The aerospace industry employs them because of the possibility of manufacturing lighter structures to reduce weight. Additive manufacturing is transforming the practice of medicine and making work easier for architects. In 2004, the Society of Manufacturing Engineers did a classification of the various technologies and there are at least four additional significant technologies in 2012. Studies are reviewed which were about the strength of products made in additive manufacturing processes. However, there is still a lot of work and research to be accomplished before additive manufacturing technologies become standard in the manufacturing industry because not every commonly used manufacturing material can be handled. The accuracy needs improvement to eliminate the necessity of a finishing process. The continuous and increasing growth experienced since the early days and the successful results up to the present time allow for optimism that additive manufacturing has a significant place in the future of manufacturing.}, - file = {/Users/fabio/Zotero/storage/BRQ74NAZ/Wong, Hernandez - 2012 - A Review of Additive Manufacturing.pdf} -} - -@article{wongWhatMakesGood2019, - title = {What Makes a Good Coordinator for Implementing the {{Sustainable Development Goals}}?}, - author = {Wong, Ryan}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117928}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117928}, - urldate = {2020-06-18}, - abstract = {Member nations that signed up to the United Nations Sustainable Development Goals agenda designated a coordinator to promote meaningful participation of the ministries. This study applies the concepts from responsive regulation to policy coordination. The framework provides four types of responsiveness, supporting the analysis of 53 interviews in Finland, Germany and Czech Republic. It was found that they were minimalists at heart, and therefore would do just enough (pyramidal), care from a distance (meta), and influence through the peers (networked). They would control matters that are more procedural and temporary (e.g. inter-ministerial working groups) and not those more substantive and permanent (e.g. setting of performance targets). Moreover, the centre of government rather than the individual ministries is most suitable for responsive coordination due to its perceived neutrality. The whole-of-government strategy on sustainable development is the result of artful coordination that is responsive and neutral. Future research might explore when would responsiveness and neutrality in coordination cease to be beneficial.}, - keywords = {Coordination,Integration,Responsive regulation,Sustainable development} -} - -@article{Woodson2015, - title = {{{3D}} Printing for Sustainable Industrial Transformation}, - author = {Woodson, Thomas S.}, - year = {2015}, - journal = {Development (Basingstoke)}, - volume = {58}, - number = {4}, - pages = {571--576}, - publisher = {{Palgrave Macmillan UK}}, - issn = {02122448}, - doi = {10.1057/s41301-016-0044-y}, - abstract = {\textcopyright{} 2016 Society for International Development. 3D printing has been hailed as a technology that will usher in a new industrial age. The technology has many advantages over traditional manufacturing, and proponents of it say that 3D printing could bring sustainable industrial transformation by altering supply chains, manufacturing jobs and production. But like all technologies, 3D printing is bound by a complex socio-technical system that could limit its growth and further increase inequality.}, - keywords = {3D printing,additive manufacturing,development,industrial change,sustainability,technology policy}, - file = {/Users/fabio/Zotero/storage/RX9KDUIJ/3D Printing for Sustainable Industrial Transformation.pdf} -} - -@article{Woodson2019, - title = {Is {{3D}} Printing an Inclusive Innovation?: {{An}} Examination of {{3D}} Printing in {{Brazil}}}, - author = {Woodson, Thomas and Alcantara, Julia Torres and {do Nascimento}, Milena Silva}, - year = {2019}, - month = feb, - journal = {Technovation}, - volume = {80--81}, - pages = {54--62}, - issn = {01664972}, - doi = {10.1016/j.technovation.2018.12.001} -} - -@article{wrightImaginingSustainableWorld2020, - title = {Imagining a {{Sustainable World}}: {{Measuring Cognitive Alternatives}} to the {{Environmental Status Quo}}}, - author = {Wright, Joshua D. and Schmitt, Michael T. and Mackay, Caroline M.L. and Neufeld, Scott D.}, - year = {2020}, - month = nov, - journal = {Journal of Environmental Psychology}, - pages = {101523}, - publisher = {{Academic Press}}, - issn = {02724944}, - doi = {10.1016/j.jenvp.2020.101523}, - urldate = {2020-11-07} -} - -@article{wrightScenarioPlanningForesight2020, - title = {Scenario Planning and Foresight: {{Advancing}} Theory and Improving Practice}, - author = {Wright, George and O'Brien, Frances and Meadows, Maureen and Tapinos, Efstathios and Pyper, Neil}, - year = {2020}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {159}, - pages = {120220}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120220}, - urldate = {2020-08-13}, - abstract = {In this Introduction, we review the logic that underpinned the earlier call for papers and provide a structured sequence for the contents of the sixteen papers that comprise the special issue. Use of particular foresight tools can have predictable effects on strategy making \textendash{} providing positive changes in mental models and challenging business-as-usual approaches but, more negatively, can also serve to narrow and shape managers' anticipations of the future. Any scenario activity necessarily involves simplification and evaluation processes in knowledge elicitation that need to be carefully monitored for effectiveness. In addition, historical analysis of the focal industry's use of ``recipes'' can give the scenario practitioner insights into the nature of unfolding futures. Inside the scenario development process, verbal and visual analysis of face-to-face interactions within the scenario team can give insights into process issues and difficulties, and an organisation's prior involvement with scenario activity may give insights into the likely time-demands of any planned activities. Additionally, stakeholders from different organisations can be facilitated to work effectively together in foresight activities. Such facilitated activities can be used to both develop policy and achieve commonly-held objectives. Two papers provide new guidance on the form of successful Delphi applications. Finally, typologies of both foresight methods/approaches and of intervention practices will allow the reflective practitioner to more fully appreciate the characteristics \textendash{} both positive and negative \textendash{} of a particular method and/or intervention type.} -} - -@article{Wu2002, - title = {Solid Freeform Fabrication of Metal Components Using Fused Deposition of Metals}, - author = {Wu, Guohua and A. Langrana, Noshir and Sadanji, Rajendra and Danforth, Stephen}, - year = {2002}, - month = feb, - journal = {Materials \& Design}, - volume = {23}, - number = {1}, - pages = {97--105}, - issn = {02613069}, - doi = {10.1016/S0261-3069(01)00079-6}, - urldate = {2015-03-17}, - keywords = {accuracy,fdmet,reproducibility,sff}, - file = {/Users/fabio/Zotero/storage/SFAFR8LS/Wu et al. - 2002 - Solid freeform fabrication of metal components using fused deposition of metals.pdf} -} - -@article{Wu2018, - title = {{{4D Printing}}: {{History}} and {{Recent Progress}}}, - author = {Wu, Jing-Jun and Huang, Li-Mei and Zhao, Qian and Xie, Tao}, - year = {2018}, - month = may, - journal = {Chinese Journal of Polymer Science}, - volume = {36}, - number = {5}, - pages = {563--575}, - issn = {0256-7679}, - doi = {10.1007/s10118-018-2089-8} -} - -@article{Wu2020, - title = {Auto-Sorting Commonly Recovered Plastics from Waste Household Appliances and Electronics Using near-Infrared Spectroscopy}, - author = {Wu, Xiaoyu and Li, Jia and Yao, Linpeng and Xu, Zhenming}, - year = {2020}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {246}, - pages = {118732}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.118732}, - abstract = {The recycling of plastics from Waste electrical and electronic equipment (WEEE) was constrained by the mix of types. Near-infrared (NIR) spectroscopy is suitable for polymer detection, and it is a rapid, non-destructive analysis method that can be applied to automatic on-line sorting system. The NIR spectra of four commonly recovered WEEE plastics, which are polypropylene (PP), polystyrene (PS), acrylonitrile butadiene styrene (ABS), and acrylonitrile butadiene styrene/polycarbonate (ABS/PC) blend, was collected. The flame-retardant ABS showed difference from ABS in NIR spectra. Three classification methods, which are spectral angle mapper (SAM), partial least squares discriminant analysis (PLS-DA) and linear discriminant analysis combined with principal component analysis (PCA-LDA), was tested. And the classification models trained on the virgin plastics have been compared with the models trained on the WEEE plastic to evaluate how these methods perform under limited training data. PLS-DA is one of the most widely used classification method in spectral data analysis, but it had unsuccessful prediction when the training set only included virgin plastics. But the overall prediction accuracy over 99\% could be achieved by the other two whether the training set was the spectra of virgin plastics or WEEE plastics. In general, NIR spectroscopy has the competency of separating WEEE plastics. Finally, an automatic on-line sorting system was designed specifically for the large plastic segments from household appliances and electronics.}, - keywords = {Multivariate analysis,NIR spectroscopy,Plastic recycling,Plastic sorting}, - file = {/Users/fabio/Zotero/storage/HSX2RQQV/Auto-sorting commonly recovered plastics from waste household appliances and electronics using near-infrared spectroscopy.pdf} -} - -@article{Wu2020a, - title = {{{DIY Laboratories}} and Business Innovation Ecosystems: {{The}} Case of Pharmaceutical Industry}, - author = {Wu, Qiang and He, Qile}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - volume = {161}, - pages = {120336}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120336}, - urldate = {2020-09-29}, - abstract = {This paper conducts an embedded case study to verify a conceptual framework by which biopharma research in Do-It-Yourself (DIY) laboratories can be integrated into Research and Development (R\&D) networks of the pharmaceutical industry. As an early attempt to extend the perspective of business innovation ecosystem into the research on DIY laboratories, this study reveals three major findings. First, DIY laboratories, contract research organizations (CROs) and pharmaceutical firms interdependently position and link with each other in an innovation ecosystem for new drug development. Second, through properly managing the issues of resource utilization and innovation appropriability, CROs play important hub and knowledge broker roles in coordinating and aligning different priorities and expectations of the key players in this innovation ecosystem. Third, this study maps and verifies two knowledge transfer models through which novel research findings in DIY laboratories can be converted into real commercial returns.}, - keywords = {Contract research organization (CRO),DIY laboratory,Innovation ecosystem,Pharmaceutical firm,Pharmaceutical R\&D} -} - -@article{Wu2021, - title = {Supporting a Circular Economy: {{Insights}} from {{Taiwan}}'s Plastic Waste Sector and Lessons for Developing Countries}, - author = {Wu, Ching-Yan and Hu, Mei-Chih and Ni, Fu-Chuan}, - year = {2021}, - month = apr, - journal = {Sustainable Production and Consumption}, - volume = {26}, - pages = {228--238}, - publisher = {{Elsevier B.V.}}, - issn = {23525509}, - doi = {10.1016/j.spc.2020.10.009}, - urldate = {2020-10-30}, - abstract = {This study investigates how, in the process of industrialization, Taiwan successfully developed its plastic waste industry into an industrial-level circular economy by leveraging a network-based collective bricolage in conjunction with a framework of adaptive institutional governance. Three conclusions are made: industrialized manufacturing sectors are foundations upon which developing nations can accumulate endogenous social capabilities and can enable the emergence of network-based collective bricolages; for developing nations that are attempting to establish circular economies based on their endogenous small-to-medium enterprises, developing network-based collective bricolages in conjunction with adaptive institutional governance is an essential and effective strategy; and transitioning into green-related sectors can further drive economic development and lead to the creation of new ventures, businesses, and job opportunities while supporting the formation of a circular economy. The approach is especially relevant for developing countries starting their industrialization process and waste management initiatives with few resources.}, - keywords = {Circular economy,Collective bricolage,Institutional governance,Taiwan,Waste recycling}, - file = {/Users/fabio/Zotero/storage/7L2CEN2Q/full-text.pdf} -} - -@article{Wu2021a, - title = {Additive Manufacturing of Recycled Plastics: {{Strategies}} towards a More Sustainable Future}, - author = {Wu, Haishang and Mehrabi, Hamid and Karagiannidis, Panagiotis and Naveed, Nida}, - year = {2022}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {335}, - pages = {130236}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.130236}, - urldate = {2022-01-25}, - abstract = {Materials recycling and additive manufacturing (AM) present challenges and great opportunities in plastic industries. The rapid developments in AM are transforming the manufacturing industry. Reducing CO 2 emissions, saving cost, and escaping from landfill are the decisive factors in this transformation. In this study, to mitigate any risk caused by production speed and scaling and accelerate shift towards a more localized recycling and manufacturing of plastic parts and components, a collection-recycling-manufacturing (CRM) model is built to envision the evaluation of process flow as well as process integration. The novelty of the CRM model enables optimization between recycling facilities and transportation distance calculation. It further strengthens a seamless integration between recycling and AM processes and envisions the areas that need enhancements. The study reveals that AM creates opportunities such as prototyping, customizing, transportation cost reduction, and creation of jobs in rural areas, which may stop unnecessary immigration; and, most importantly, reducing CO 2 emissions and plastic waste despite challenges such as skills requirement and disadvantages in speed and scale production. With a combination of recycling and AM, sustainable manufacturing can be achieved effectively, although several conditions must be met and obstacles must be overcome. A few innovations are further proposed in this study to streamline the transformation and to support the "cradle-to-cradle'' approach towards "zero waste" for a sustainable future.}, - file = {/Users/fabio/Zotero/storage/23CZDD7H/Wu et al. - 2022 - Additive manufacturing of recycled plastics Strategies towards a more sustainable future.pdf} -} - -@inproceedings{Wudy2014, - title = {Influence of Degradation Behavior of Polyamide 12 Powders in Laser Sintering Process on Produced Parts}, - booktitle = {{{AIP Conference Proceedings}}}, - author = {Wudy, K. and Drummer, D. and K{\"u}hnlein, F. and Drexler, M.}, - year = {2014}, - volume = {1593}, - pages = {691--695}, - issn = {15517616}, - doi = {10.1063/1.4873873}, - abstract = {Additive manufacturing technologies, such as selective laser melting of polymers enable manufacturing of complex parts without tools and forms. Due to high temperature during processing, a degradation of the used plastic powder occurs. The unmolded material in the building chamber, the so-called partcake, can be removed from the finished component after building and reused for another process. To realize reproducible part properties refreshing of partcake powder is necessary. This paper presents results on the investigations of degradation behavior of polyamide 12 powder during selective laser melting process. The influence of different ambient conditions, e.g. ambient air, nitrogen and vacuum, is investigated in a model experiment. Oven aged polymer powders were analyzed with regard to their process relevant material properties. Considered material properties are phase transition temperatures, melting viscosity or molecular weight. The results of the investigations show, that the influence of high process temperatures on used material can be reduced using other ambient conditions. Process relevant material properties are minor affected by storage under vacuum. In addition to that the influence of different ambient conditions as well as a material pretreatment on the degradation behavior of sls materials, e.g. exclusion of intermolecular located oxygen, is analyzed. To correlate these results of the model experiment with real manufacturing process laser sintering experiments are done. PA12 powder is used for several building processes with refreshing. Produced specimens and resulting partcake powder are analyzed and correlated to the results of model experiment. Correlating effects, regarding process relevant material properties as well as aging influenced mechanical properties of specimens can be detected.}, - isbn = {978-0-7354-1227-9}, - keywords = {degradation,polyamide 12,selective laser melting of polymers}, - file = {/Users/fabio/Zotero/storage/E73SXQBQ/Wudy et al. - 2014 - Influence of degradation behavior of polyamide 12 powders in laser sintering process on produced parts.pdf} -} - -@article{wuHowDigitalizationCapabilities2022, - title = {How Do Digitalization Capabilities Enable Open Innovation in Manufacturing Enterprises? {{A}} Multiple Case Study Based on Resource Integration Perspective}, - shorttitle = {How Do Digitalization Capabilities Enable Open Innovation in Manufacturing Enterprises?}, - author = {Wu, Linfei and Sun, Liwen and Chang, Qing and Zhang, Die and Qi, Peixiao}, - year = {2022}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {184}, - pages = {122019}, - issn = {0040-1625}, - doi = {10.1016/j.techfore.2022.122019}, - urldate = {2022-09-18}, - abstract = {Enabling open innovation through digitalization capabilities is an important way for manufacturing enterprises to gain a competitive advantage in the digital economy. However, existing research on digital transformation and innovation development in manufacturing enterprises is based on conceptual and review studies, leading to a lack of exploring the mechanisms of digitalization capabilities enabling open innovation. In this research, we conducted a multiple case analysis with interviews and document data from four different types of manufacturing companies with open innovation enabled by digitalization capabilities, providing two key contributions to extant literature. First, resource integration is the bridge that connects digitalization capabilities with open innovation. Enterprises further empower open innovation by promoting the identification and acquisition of digital resources, resource matching and utilization through digitalization capabilities. Second, the process of digitalization capabilities enabling open innovation is closely linked to internal and external situational factors, with the environmental dynamics and the digital awareness of managers playing a catalytic role. The findings clarify the inner mechanism of digitalization capabilities to drive open innovation from the perspective of resource integration and provide theoretical reference for digital transformation and open innovation practice of manufacturing enterprises.}, - langid = {english}, - keywords = {Digital awareness of managers,Digitalization capabilities,Environmental dynamics,Open innovation,Resource integration}, - file = {/Users/fabio/Zotero/storage/9CFT2LYX/S0040162522005406.html} -} - -@article{wuRepurposingWastePlastics2020, - title = {Repurposing {{Waste Plastics}} into {{Cleaner Asphalt Pavement Materials}}: {{A Critical Literature Review}}}, - author = {Wu, Shenghua and Montalvo, Luke}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {280}, - pages = {124355}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.124355}, - urldate = {2020-10-19} -} - -@article{Wycoff1999, - title = {Stimulating Innovation with Collaboration Rooms}, - author = {Wycoff, Joyce and Snead, Lynne}, - year = {1999}, - journal = {The Journal for Quality and Participation}, - volume = {22}, - number = {2}, - pages = {55--57}, - issn = {10409602}, - abstract = {Innovation is a collaborative skill that involves actively scouting the future, generating new ideas, choosing the best ones, rapidly and effectively implementing them, and then learning the lessons from successes and failures to begin again. Collaboration rooms, innovation centers, creativity labs - whatever the preferred terminology - are centers that can be relatively easy to set up and have enormous payoff. The ability to effectively complete projects is a critical skill; and since most projects involve more than one person, the ability to collaborate successfully is a fundamental key to success. Critical to creative collaboration are: 1. acknowledging that everyone has ideas, 2. developing a shared vision of a compelling challenge, 3. having a rich flow of and easy access to information, 4. creating trust, respect and participation. There are some important fundamentals to keep in mind as you start to design a collaboration space: 1. interaction, 2. visual thinking, 3. beauty, 4. fun, 5. abundance, and 6. tools. Collaboration rooms exist to create better and more innovative project results.} -} - -@article{Wydra2020, - title = {Measuring Innovation in the Bioeconomy \textendash{} {{Conceptual}} Discussion and Empirical Experiences}, - author = {Wydra, Sven}, - year = {2020}, - journal = {Technology in Society}, - volume = {61}, - number = {October 2019}, - pages = {101242}, - publisher = {{Elsevier Ltd}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101242}, - abstract = {Innovations in the bioeconomy are expected to provide new solutions to major economic, societal and ecological challenges like resource depletion, food insecurity or climate change. However, information about innovation activities in the bioeconomy and its outcomes is scattered and more systematic measurement efforts are useful for policy making to assess its impact and whether objectives are met. This article provides an overview of information needs and data availability for innovation indicators. Furthermore, data for key input and throughput indicators are presented and discussed for the bioeconomy in Germany. The data indicates a rather strong role of Germany for publications and patents. However, the commercial success remains unclear, because of current limitations in information availability about the output and outcome of innovations efforts. Here, the most critical information gap in exist. In order to improve this situation additional data collection such as innovation survey for the bioeconomy would be needed.}, - keywords = {Bioeconomy,Innovation,Innovation indicators,Monitoring,Patents}, - file = {/Users/fabio/Zotero/storage/ZGQDPNH2/Measuring innovation in the bioeconomy – Conceptual discussion and empirical experiences.pdf} -} - -@article{Xia2018, - title = {A Novel Dry Cleaning System for Contaminated Waste Plastic Purification in Gas-Solid Media}, - author = {Xia, Dong and Zhang, Fu Shen}, - year = {2018}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {171}, - pages = {1472--1480}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2017.10.028}, - urldate = {2020-04-08}, - abstract = {Dry cleaning of waste plastic is urgently required to substitute traditional wet cleaning, especially in arid areas. Nevertheless, it is still limited by relatively poor cleaning performance. This study reports a novel, effective and sustainable dry cleaning system for waste plastic purification in gas-solid media. An agitated fluidized bed and Geldart B silica sand were employed to fulfill the dry cleaning process without any consumption of water. With gravimetric and spectroscopic methods determining cleaning performance index, superficial gas velocity, bed height, temperature, agitation speed and cleaning time were investigated to evaluate their influence on dry cleaning performance. Under the moderate operating conditions, the gravimetric and spectroscopic indexes of the dry cleaning reached up to 98.4\% and 95.0\%, which were close to those of routine caustic washing (99.2\% and 98.9\%). Furthermore, the dry cleaning turned in a similar performance by visual inspection, as well as a similar surface transition of more hydrophilicity compared with caustic washing. Mechanism analysis indicated that mutual interaction between fluidization and agitation facilitated adhesion breaking and dispersing of contaminants into gas-solid media due to sufficient collisions and mass transfer. Triboelectrification that resulted in redeposition of fine powder should be avoided to further improve dry cleaning performance. This study provides theoretical and practical guidance for dry cleaning of contaminated waste plastics.}, - keywords = {Agitated fluidized bed,Dry cleaning,Gas-solid media,Waste plastics}, - file = {/Users/fabio/Zotero/storage/GK4G5KDL/A novel dry cleaning system for contaminated waste plastic purification in gas-solid media.pdf} -} - -@article{Xiang2018, - title = {Systematic Method for Big Manufacturing Data Integration and Sharing}, - author = {Xiang, Feng and Yin, Qi and Wang, Zihan and Jiang, Guo Zhang}, - year = {2018}, - month = feb, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {94}, - number = {9-12}, - pages = {3345--3358}, - issn = {0268-3768}, - doi = {10.1007/s00170-017-0575-8} -} - -@article{Xiao2014, - title = {Developing a {{3D}} Colour Image Reproduction System for Additive Manufacturing of Facial Prostheses}, - author = {Xiao, Kaida and Zardawi, Faraedon and Van Noort, Richard and Yates, Julian M.}, - year = {2014}, - month = feb, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {70}, - number = {9-12}, - pages = {2043--2049}, - publisher = {{Springer}}, - issn = {02683768}, - doi = {10.1007/s00170-013-5448-1}, - urldate = {2021-01-12}, - abstract = {In this study, a new 3D colour image reproduction system is proposed for the automated and accurate additive manufacturing of soft tissue facial prostheses. A framework of 3D colour image reproduction was defined and a protocol for each sub-process was developed for this specific application. Colour management processes were developed and integrated into the proposed 3D image reproduction system; colour profiles for both the 3dMD photogrammetry system and the Z Corp Z510 3D printer were established utilising conventional colour reproduction techniques for 2D images. The soft tissue prototypes of both nose and ear prostheses were produced using the proposed system. The quality of prostheses was evaluated. The results show that the protocol used in the 3D manufacturing process was capable of producing accurate skin colour with fine textures and 3D shape, with significant savings in both time and cost. \textcopyright{} 2013 Springer-Verlag London.}, - keywords = {3D colour printing,3D image reproduction,Advanced manufacture,Facial soft tissue prostheses}, - file = {/Users/fabio/Zotero/storage/744HEK7C/full-text.pdf} -} - -@article{xiaoAltruisticPreferenceGovernment2022, - title = {Altruistic Preference and Government Subsidies in a Manufacturing-Recycling System with Eco-Design}, - author = {Xiao, Siqi and Chang, Xiangyun and Chen, Meihan}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {359}, - pages = {132095}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.132095}, - urldate = {2022-05-29} -} - -@article{xiaoGreenBehaviorLowCarbon2020, - title = {Green {{Behavior}} towards {{Low-Carbon Society}}: {{Theory}}, {{Measurement}} and {{Action}}}, - author = {Xiao, Jiang and Zhen, Zaili and Tian, Lixin and Su, Bin and Chen, Hong and Zhu, Axing}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - pages = {123765}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123765}, - urldate = {2020-08-24} -} - -@article{xiaoLowCarbonPotential2022, - title = {Low Carbon Potential of Urban Symbiosis under Different Municipal Solid Waste Sorting Modes Based on a System Dynamic Method}, - author = {Xiao, Shijiang and Dong, Huijuan and Geng, Yong and Tian, Xu}, - year = {2022}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {179}, - pages = {106108}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106108}, - urldate = {2022-05-29}, - abstract = {Urban symbiosis (UrS) is an innovative application of circular economy focusing on municipal solid waste (MSW). However, few studies have been conducted to forecast the impact of UrS on climate change under different MSW sorting policies such as four-category/two-category MSW separation standards and high/low sorting rates from a long-term and dynamic perspective. This study develops a system dynamics model to simulate the greenhouse gas (GHG) emission reduction potential and the energy saving potential of UrS under different MSW sorting modes in Shanghai for the period of 2020\textendash 2050. The results show that UrS with four-category MSW separation and a high sorting rate (scenario S1) has the highest energy saving and GHG reduction potential at both annual level and accumulative level, approximately 10.75 times the energy saving and 146.30\% of the GHG emission reduction compared with the Business-As-Usual (BAU) scenario in 2050. Meanwhile, the scenario of two-category MSW sorting and a high sorting rate (S3) can further help reduce 12.84\% GHG emissions than the scenario of four-category MSW sorting and low sorting rates (S2) in 2050. Among all the UrS measures, waste plastic recovery can contribute the most GHG emission and energy consumption reductions, with figures of approximately 2.15 Mt and 17.28 Mtce, respectively. Finally, policy recommendations on strengthening implementation of four-category MSW separation, making efficient two-category MSW separation as a backup plan, and promoting reutilization of waste plastic and Refuse Plastic \& Paper Fuel technology are proposed.}, - keywords = {Energy conservation,Greenhouse gas (GHG),Municipal solid waste (MSW),Scenarios development,System dynamics (SD),Urban governance} -} - -@article{xiaSpatialtemporalHeterogeneityEcosystem2023, - title = {Spatial-Temporal Heterogeneity of Ecosystem Service Interactions and Their Social-Ecological Drivers: {{Implications}} for Spatial Planning and Management}, - shorttitle = {Spatial-Temporal Heterogeneity of Ecosystem Service Interactions and Their Social-Ecological Drivers}, - author = {Xia, Hao and Yuan, Shaofeng and Prishchepov, Alexander V.}, - year = {2023}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {189}, - pages = {106767}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106767}, - urldate = {2022-12-12}, - abstract = {Uncovering the complex interactions among ecosystem services (ESs) is a prerequisite for managing multiple ESs simultaneously. We mapped the supply of six ESs, quantified their trade-offs/synergies and bundles, determined dominant social-ecological drivers, and subsequently provided sustainable spatial planning and management strategies at both grid and sub-watershed scales. The results revealed that: (1) the patterns of ESs were spatially heterogeneous, with food production decreasing the most, by 14.86\% (grid scale) and 17\% (sub-watershed scale), and water supply increasing the most, by 22.46\% (grid scale) and 22.57\% (sub-watershed scale) from 2000 to 2020; (2) ten ES pairs presented synergies while five ES pairs related to food production showed trade-offs at both spatial scales, with three ES pairs at the grid scale and two ES pairs at the sub-watershed scale experiencing declined synergies or increased trade-offs; (3) our spatial-temporal and cross-scale analysis of ES interactions identified ES pairs with declined synergies as an additional priority in ecosystem management and determined ES bundles as a zoning basis for spatial planning at both scales. The similarities and divergences in ES interactions and their drivers at different scales require the linkage and distinct focus of spatial planning at different scales. Thus, we integrated spatial-temporal and cross-scale knowledge on ES interactions into spatial planning to underpin sustainable ecosystem management across scales.}, - langid = {english}, - keywords = {Ecosystem service,Ecosystem service bundle,Scale effect,Social-ecological driver,Spatial planning,Trade-off}, - file = {/Users/fabio/Zotero/storage/XMN7UYS7/Xia et al_2023_Spatial-temporal heterogeneity of ecosystem service interactions and their.pdf} -} - -@article{Xie2019, - title = {Integrated Data Envelopment Analysis Methods for Measuring Technical, Environmental, and Eco-Efficiencies}, - author = {Xie, Jianhui and Zhou, Shengchao and Chen, Ya}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {238}, - pages = {117939}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117939} -} - -@article{Xie2019a, - title = {Predicting Climate Change Risk Perception and Willingness to Act}, - author = {Xie, Belinda and Brewer, Marilynn B. and Hayes, Brett K. and McDonald, Rachel I. and Newell, Ben R.}, - year = {2019}, - month = oct, - journal = {Journal of Environmental Psychology}, - volume = {65}, - pages = {101331}, - publisher = {{Academic Press}}, - issn = {15229610}, - doi = {10.1016/j.jenvp.2019.101331}, - urldate = {2020-05-21}, - abstract = {We extended a recent model of climate change risk perception (van der Linden, 2015) to predict the risk perception of Australians and their willingness to engage in mitigation behaviours (N = 921). Affect, mitigation response inefficacy, and descriptive norms were the most important predictors of risk perception, highlighting the influence of affective, cognitive, and socio-cultural factors. Affect and mitigation response inefficacy were also important predictors of behavioural willingness, but socio-cultural influences (free-market ideology, prescriptive norms, and biospheric values) played a relatively larger role in explaining the variance of behavioural willingness. Structural equation modelling provided further evidence that risk perception and behavioural willingness are separable constructs, as some factors in the model had direct effects on willingness independent of risk perception. We discuss the need for future research to develop a comprehensive model of behavioural willingness, and the need for public communication to combat mitigation response inefficacy.}, - keywords = {Behavioural willingness,Climate change,Psychological model,Public communication,Risk perception} -} - -@article{xieNonlinearRelationshipEnergy2021, - title = {Non-Linear Relationship between Energy Consumption Transition and Green Total Factor Productivity: {{A}} Perspective on Different Technology Paths}, - author = {Xie, Fangming and Zhang, Bing and Wang, Ning}, - year = {2021}, - month = oct, - journal = {Sustainable Production and Consumption}, - volume = {28}, - pages = {91--104}, - publisher = {{Elsevier B.V.}}, - urldate = {2021-09-15}, - abstract = {Currently, the energy consumption structure is changing from fossil energy consumption to renewable energy consumption. Therefore, it is important to investigate whether energy consumption transition can actually increase green total factor productivity (GTFP) and how to reconcile the relationship between energy consumption transition and GTFP through different technological paths. After measuring GTFP in 27 European Union member states using the Global Malmquist-Luenberger (GML) method, this paper analyzes the nonlinear relationship between energy consumption transition and GTFP with the use of panel threshold regression models, and the empirical results show that (i) the relationship between energy consumption transition and GTFP is inverse "N " type of nonlinear relationship. This indicates that the degree of energy consumption transition will only have a positive effect on GTFP if it is in an ``appropriate range''. Either too high or too low a degree of energy consumption transition is not conducive to enhancing GTFP. (ii) The development of emerging technologies can help GTFP to be enhanced in the energy consumption transition. (iii) Improving the productivity of existing technologies does not improve GTFP in the energy consumption transition. The main conclusions and recommendations of this paper are: (i) Although the energy consumption transition is "green", it does not always have a positive impact on GTFP, and sometimes it even has a negative effect on GTFP. (ii) In the context of the energy consumption transition, governments should pay more attention to emerging technologies which are not based on fossil fuel as a production condition.}, - keywords = {Energy consumption transition,Global Malmquist\textendash Luenberger,Green total factor productivity,Non-linear relationship} -} - -@article{xingCreativeDestructionCreative2020, - title = {From Creative Destruction to Creative Appropriation: {{A}} Comprehensive Framework}, - author = {Xing, Jack Linzhou and Sharif, Naubahar}, - year = {2020}, - month = sep, - journal = {Research Policy}, - volume = {49}, - number = {7}, - pages = {104060}, - publisher = {{North-Holland}}, - issn = {00487333}, - doi = {10.1016/j.respol.2020.104060}, - urldate = {2020-07-20} -} - -@article{xiongCurrentSituationKey2020, - title = {Current Situation and Key Manufacturing Considerations of Green Furniture in {{China}}: {{A}} Review}, - author = {Xiong, Xianqing and Ma, Qingru and {YingyingYuan} and Wu, Zhihui and Zhang, Min}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {267}, - pages = {121957}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121957}, - urldate = {2020-05-27} -} - -@article{Xu2000a, - title = {Toward {{Generic Models}} for {{Comparative Rapid Prototyping}} and {{Manufacturing}}}, - author = {Xu, F and Wong, Y S and Loh, H T}, - year = {2000}, - journal = {Journal of Manufacturing Systems}, - volume = {19}, - number = {5}, - pages = {283--296}, - file = {/Users/fabio/Zotero/storage/FR2ZTY9Y/Toward Generic Models for Comparative Rapid Prototyping and Manufacturing.pdf} -} - -@article{Xu2004, - title = {Striving for a Total Integration of {{CAD}}, {{CAPP}}, {{CAM}} and {{CNC}}}, - author = {Xu, X.W and He, Q.}, - year = {2004}, - month = apr, - journal = {Robotics and Computer-Integrated Manufacturing}, - volume = {20}, - number = {2}, - pages = {101--109}, - issn = {07365845}, - doi = {10.1016/j.rcim.2003.08.003}, - urldate = {2013-07-19}, - file = {/Users/fabio/Zotero/storage/3N4YF66K/Striving for a total integration of CAD, CAPP, CAM and CNC.pdf} -} - -@article{Xu2018, - title = {Environment-Friendly and Reusable Ink for {{3D}} Printing of Metallic Structures}, - author = {Xu, Chao and Wu, Qinghua and L'Esp{\'e}rance, Gilles and Lebel, Louis Laberge and Therriault, Daniel}, - year = {2018}, - month = dec, - journal = {Materials \& Design}, - volume = {160}, - pages = {262--269}, - issn = {02641275}, - doi = {10.1016/j.matdes.2018.09.024}, - file = {/Users/fabio/Zotero/storage/45K87WNQ/Environment-friendly and reusable ink for 3D printing of metallic structures.pdf} -} - -@article{Xu2020, - title = {Determinants of Consumer's Intention to Purchase Authentic Green Furniture}, - author = {Xu, Xiaoping and Hua, Yannong and Wang, Shanyong and Xu, Guifen}, - year = {2020}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {156}, - pages = {104721}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104721} -} - -@article{xuApplyingArtificialNeural2021, - title = {Applying Artificial Neural Networks ({{ANNs}}) to Solve Solid Waste-Related Issues: {{A}} Critical Review}, - author = {Xu, Ankun and Chang, Huimin and Xu, Yingjie and Li, Rong and Li, Xiang and Zhao, Yan}, - year = {2021}, - month = apr, - journal = {Waste Management}, - volume = {124}, - pages = {385--402}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.02.029}, - urldate = {2021-03-08} -} - -@article{xuCombattingMedicalPlastic2021, - title = {Combatting Medical Plastic Waste through Visual Elicitation: {{Insights}} from Healthcare Professionals}, - author = {Xu, Linping and Kong, Yan and Wei, Mingxue and Wang, Yichuan and Zhang, Minhao and Tjahjono, Benny}, - year = {2021}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {329}, - pages = {129650}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129650}, - urldate = {2021-11-30} -} - -@article{Xue2019, - title = {From Biophilic Design to Biophilic Urbanism: {{Stakeholders}}' Perspectives}, - author = {Xue, Fei and Gou, Zhonghua and Lau, Stephen Siu-Yu and Lau, Siu-Kit and Chung, Kin-Hung and Zhang, Jian}, - year = {2019}, - month = feb, - journal = {Journal of Cleaner Production}, - volume = {211}, - pages = {1444--1452}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.11.277} -} - -@article{Xue2022, - title = {General {{Methodology}} to {{Investigate}} the {{Effect}} of {{Process Parameters}} on the {{Vibration Properties}} of {{Structures Produced}} by {{Additive Manufacturing Using Fused Filament Fabrication}}}, - author = {Xue, Fangkai and Robin, Guillaume and Boudaoud, Hakim and Cruz Sanchez, Fabio A. and Daya, El Mostafa}, - year = {2022}, - month = jan, - journal = {JOM}, - volume = {74}, - number = {3}, - pages = {1166--1175}, - publisher = {{Springer}}, - issn = {15431851}, - doi = {10.1007/s11837-021-05051-9}, - urldate = {2022-03-21}, - abstract = {Advances in fused filament fabrication (FFF) enable the manufacturing of multi-material and multi-functional structures, which provides new opportunities for the development of lightweight and high damping structures for vibration control. However, very few studies mention the vibration characteristics of FFF printed structures. This paper proposes a general methodology to investigate the effect of process parameters, such as raster angle, nozzle temperature, layer height, and deposition speed, on the vibration properties of FFF printed structures. An application of this methodology to structures printed by polylactic acid (PLA) is realized. In terms of vibration properties, a good reproducibility of the FFF process and the vibration test was achieved. It was found that raster angle significantly affects both resonant frequency (16.6\%) and loss factor (7.5\%). The impact of the other three parameters is relatively low (less than 4\%). All these results provide guidance for further application of FFF in the vibration field.}, - copyright = {All rights reserved}, - keywords = {Chemistry/Food Science,Earth Sciences,Engineering,Environment,general,Physics} -} - -@article{xuEcosystemServicesbasedDecisionmaking2022, - title = {Ecosystem Services-Based Decision-Making: {{A}} Bridge from Science to Practice}, - author = {Xu, Zihan and Peng, Jian}, - year = {2022}, - month = sep, - journal = {Environmental Science \& Policy}, - volume = {135}, - pages = {6--15}, - publisher = {{Elsevier}}, - issn = {1462-9011}, - doi = {10.1016/J.ENVSCI.2022.04.010}, - urldate = {2022-05-23} -} - -@article{xuInfluenceRoleModels2021, - title = {Influence of Role Models on Public Participation in Household Waste Separation: {{An}} Examination of Local Contextual Moderators}, - author = {Xu, Lin and Chu, Xiaojing and Ling, Maoliang}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {1934--1943}, - publisher = {{Elsevier BV}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.04.032}, - urldate = {2021-06-08}, - abstract = {Despite being a popular policy tool to promote household waste separation in local communities, role model strategies have been shown to achieve only mixed success so far. The reasons for their varied performance are not clearly understood. The present study aims to address this important issue by exploring how the influence of role models varies with the social, economic, and demographic features of local residential areas. Interrupted time series analyses of monthly observations of public participation in a large waste sorting program in Hangzhou, China have been conducted to test the theoretical propositions. The results show that role models increased the overall program participation level by 5.3\%. This positive influence was greater in areas with stronger group cohesion, higher economic level, and a younger population. However, role models had a minimal effect among people with a low contribution predisposition. These findings demonstrate that the influence of role models on household recycling depends significantly on local contexts and personal idiosyncrasy, implying ways to improve the effectiveness of role model strategies in motivating residents' sustainable behavior.} -} - -@article{xuMicroplasticPollutionChinese2021, - title = {Microplastic Pollution in {{Chinese}} Urban Rivers: {{The}} Influence of Urban Factors}, - author = {Xu, Yuyao and Chan, Faith Ka Shun and Johnson, Matthew and Stanton, Thomas and He, Jun and Jia, Tian and Wang, Jue and Wang, Zilin and Yao, Yutong and Yang, Junting and Liu, Dong and Xu, Yaoyang and Yu, Xubiao}, - year = {2021}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {173}, - pages = {105686}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105686}, - urldate = {2021-06-10} -} - -@article{xuModellingNetworkEconomy2020, - title = {Modelling the Network Economy: {{A}} Population Ecology Perspective on Network Dynamics}, - author = {Xu, Jin and Peng, Biyu and Cornelissen, Joep}, - year = {2020}, - month = dec, - journal = {Technovation}, - pages = {102212}, - publisher = {{Elsevier}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2020.102212}, - urldate = {2020-12-14} -} - -@article{xuMultidimensionalScientometricIndicators2020, - title = {Multidimensional {{Scientometric}} Indicators for the Detection of Emerging Research Topics}, - author = {Xu, Haiyun and Winnink, Jos and Yue, Zenghui and Zhang, Huiling and Pang, Hongshen}, - year = {2020}, - month = dec, - journal = {Technological Forecasting and Social Change}, - pages = {120490}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120490}, - urldate = {2020-12-14} -} - -@article{xuSmartResilientManufacturing2021, - title = {Smart and Resilient Manufacturing in the Wake of {{COVID-19}}}, - author = {Xu, Xun and Wang, Lihui and Fratini, Livan and Ragai, Ihab and Nee, Andrew Yeh Ching}, - year = {2021}, - month = jul, - journal = {Journal of Manufacturing Systems}, - volume = {60}, - pages = {707--708}, - issn = {0278-6125}, - doi = {10.1016/j.jmsy.2021.07.025}, - urldate = {2022-10-05}, - pmcid = {PMC8332923}, - pmid = {34366545}, - file = {/Users/fabio/Zotero/storage/H6GBR972/Xu et al_2021_Smart and resilient manufacturing in the wake of COVID-19.pdf} -} - -@article{xuTopicModelsBased2021, - title = {A Topic Models Based Framework for Detecting and Forecasting Emerging Technologies}, - author = {Xu, Shuo and Hao, Liyuan and Yang, Guancan and Lu, Kun and An, Xin}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120366}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120366}, - urldate = {2020-10-19}, - file = {/Users/fabio/Zotero/storage/VBGMSHQK/full-text.pdf} -} - -@inproceedings{y.ahmedDesignConsiderationsDue2016, - title = {Design Considerations Due to Scale Effects in 3d Concrete Printing}, - booktitle = {8th {{International Conference}} of the {{Arab Society}} for {{Computer Aided Architectural Design}} ({{ASCAAD}} 2016)}, - author = {Y. Ahmed, Zeeshan and P. Bos, Freek and J.M. Wolfs, Rob and A.M. Salet, Theo}, - year = {2016}, - pages = {1--10}, - abstract = {The effect of scale on different parameters of the 3D printing of concrete is explored through the design and fabrication of a 3D concrete printed pavilion. This study shows a significant gap exists between what can be generated through computer aided design (CAD) and subsequent computer aided manufacturing (generally based on CNC technology). In reality, the 3D concrete printing on the one hand poses manufacturing constraints (e.g. minimum curvature radii) due to material behaviour that is not included in current CAD/CAM software. On the other hand, the process also takes advantage of material behaviour and thus allows the creation of shapes and geometries that, too, can't be modelled and predicted by CAD/CAM software. Particularly in the 3D printing of concrete, there is not a 1:1 relation between toolpath and printed product, as is the case with CNC milling. Material deposition is dependent on system pressure, robot speed, nozzle section, layer stacking, curvature and more \textendash{} all of which are scale dependent. This paper will discuss the design and manufacturing decisions based on the effects of scale on the structural design, printed and layered geometry, robot kinematics, material behaviour, assembly joints and logistical problems. Finally, by analysing a case study pavilion, it will be explore how 3D concrete printing structures can be extended and multiplied across scales and functional domains ranging from structural to architectural elements, so that we can understand how to address questions of scale in their design.} -} - -@article{Yadav2020, - title = {A Framework to Overcome Sustainable Supply Chain Challenges through Solution Measures of Industry 4.0 and Circular Economy: {{An}} Automotive Case}, - author = {Yadav, Gunjan and Luthra, Sunil and Jakhar, Suresh Kumar and Mangla, Sachin Kumar and Rai, Dhiraj P.}, - year = {2020}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {254}, - pages = {120112}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120112} -} - -@article{yadavFrameworkQuantifyingEnvironmental2020, - title = {Framework for Quantifying Environmental Losses of Plastics from Landfills}, - author = {Yadav, Vinay and Sherly, M.A. and Ranjan, Pallav and Tinoco, Rafael O. and Boldrin, Alessio and Damgaard, Anders and Laurent, Alexis}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {104914}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.104914}, - urldate = {2020-05-27} -} - -@article{yadavRiskPlasticsLosses2022, - title = {Risk of Plastics Losses to the Environment from {{Indian}} Landfills}, - author = {Yadav, Vinay and Sherly, M. A. and Ranjan, Pallav and Prasad, Vindhyawasini and Tinoco, Rafael O and Laurent, Alexis}, - year = {2022}, - month = dec, - journal = {Resources, Conservation and Recycling}, - volume = {187}, - pages = {106610}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106610}, - urldate = {2022-09-18}, - abstract = {A significant fraction (45\%) of global environmental losses of plastics stems from mismanaged landfills and open dumps located mainly in the Asian region. These lost plastics cause substantial impacts on the ecosystems, human health and economy. To date, no large-scale quantification has ever been made to estimate urban, national, or global risks of plastics losses from landfills, covering all relevant pathways, like wind blowing, precipitation/runoff, or flooding. Here, we have developed a novel framework to categorize urban centers into different risk levels based on a trivariate risk assessment model. We applied it to entire India, building on landfill data and modeling pertaining to 496 Indian urban centers with populations larger than 0.1 million inhabitants. Results show that {$\sim$}11\% of these cities present severe and very high risk levels, including largely populated metropolitan cities like Mumbai and Delhi. This nationwide assessment can help policy-makers identify and prioritize urban centers in dire need of actions to limit environmental losses of plastics. Owing to the importance of landfills as a plastics release source, such decision support offers strong opportunities to curb plastics pollution globally.}, - langid = {english}, - keywords = {Environmental losses of plastics,Landfills,Plastics waste management,Risk framework}, - file = {/Users/fabio/Zotero/storage/Q5PHASF3/Yadav et al_2022_Risk of plastics losses to the environment from Indian landfills.pdf;/Users/fabio/Zotero/storage/FLZC2HMH/S092134492200444X.html} -} - -@article{Yadollahi2017, - title = {Additive Manufacturing of Fatigue Resistant Materials: {{Challenges}} and Opportunities}, - author = {Yadollahi, Aref and Shamsaei, Nima}, - year = {2017}, - month = may, - journal = {International Journal of Fatigue}, - volume = {98}, - pages = {14--31}, - publisher = {{Elsevier Ltd}}, - issn = {01421123}, - doi = {10.1016/j.ijfatigue.2017.01.001}, - keywords = {additive manufacturing,am}, - file = {/Users/fabio/Zotero/storage/6X656UCT/Additive manufacturing of fatigue resistant materials Challenges and opportunities.pdf} -} - -@article{yamamotoWhatActivitiesReduce2022, - title = {What Activities Reduce Plastic Waste the Most? \textendash{} {{The}} Path to a Circular Economy for {{Japan}}'s Manufacturing Industry}, - shorttitle = {What Activities Reduce Plastic Waste the Most?}, - author = {Yamamoto, Masashi and Eva, Saifun Nahaer}, - year = {2022}, - month = sep, - journal = {Waste Management}, - volume = {151}, - pages = {205--213}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.07.041}, - urldate = {2022-09-01}, - abstract = {In recent years, plastic waste has received increasing attention, though most studies on it have investigated only household plastic waste. In Japan, the amount of household plastic waste is approximately equal to that generated by the manufacturing process in Japan. Therefore, we focus on the change in plastic waste emissions from manufacturing from 2004 to 2018. Following the novel method of Levinson (2015), we decompose plastic waste emissions into scale effects, composition effects, and (in)direct technique effects. This first application of this method for waste generation shows that the technique effect contributes the most to reducing pollution emissions, whereas the composition effect has a very limited impact. These results contrast with those of previous studies (Brunel (2017) and Cole and Zhang (2019)) on CO2 emissions and provide new insights into the characteristics of plastic waste generation. The reason for the increase in technique effect despite the absence of strict emission control regulations targeting industrial waste is that Japanese environmental policies are often promoted in a manner that involves all stakeholders, creating conditions for successful voluntary agreements through mutual monitoring.}, - langid = {english}, - keywords = {Composition effect,Decomposition,Plastic waste,Technique effect,Voluntary agreement}, - file = {/Users/fabio/Zotero/storage/CWKZ5BG5/Yamamoto y Eva - 2022 - What activities reduce plastic waste the most – T.pdf;/Users/fabio/Zotero/storage/KXXL3G9X/S0956053X22003944.html} -} - -@article{yamaneYoungerGenerationDriving2021, - title = {Is the {{Younger Generation}} a {{Driving Force Toward Achieving}} the {{Sustainable Development Goals}}? {{Survey Experiments}}}, - author = {Yamane, Tomomi and Kaneko, Shinji}, - year = {2021}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {292}, - pages = {125932}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.125932}, - urldate = {2021-02-14} -} - -@article{Yamashita2009, - title = {Compositions of Volatile Organic Compounds Emitted from Melted Virgin and Waste Plastic Pellets}, - author = {Yamashita, Kyoko and Yamamoto, Naomichi and Mizukoshi, Atsushi and Noguchi, Miyuki and Ni, Yueyong and Yanagisawa, Yukio}, - year = {2009}, - journal = {Journal of the Air and Waste Management Association}, - volume = {59}, - number = {3}, - pages = {273--278}, - publisher = {{Taylor and Francis Inc.}}, - issn = {21622906}, - doi = {10.3155/1047-3289.59.3.273}, - urldate = {2020-04-08}, - abstract = {To characterize potential air pollution issues related to recycling facilities of waste plastics, volatile organic compounds (VOCs) emitted from melted virgin and waste plastics pellets were analyzed. In this study, laboratory experiments were performed to melt virgin and waste plastic pellets under various temperatures (150, 200, and 250 \textdegree C) and atmospheres (air and nitrogen [N2]). In the study presented here, low-density polyethylene (LDPE), polypropylene (PP), polystyrene (PS) and the recycled waste plastic pellets were used. The VOCs generated from each plastic pellets were collected by Tenax/Carboxen adsorbent tubes and analyzed by thermal desorption-gas chromatography/mass spectrometry (TD-GC/MS). The result showed the higher temperatures generated larger amounts of total VOCs (TVOCs). The VOCs emitted from the virgin plastic pellets likely originated from polymer degradation. Smaller TVOC emissions were observed in N2 atmosphere than in air atmosphere. In particular, larger amounts of the oxygenated compounds, which are generally hazardous and malodorous, were detected in air than in N2. In addition to the compounds originating from polymer degradation, the compounds originating from the plastic additives were also detected from LDPE and PS. Furthermore, various species of VOCs likely originating from contaminant inseparate polyvinyl chloride (PVC), food residues, cleaning agents, degreasers, and so on were detected from the waste plastic. Thus, melting waste plastics, as is conducted in recycling facilities, might generate larger amounts of potentially toxic compounds than producing virgin plastics. Copyright 2009 Air \& Waste Management Association.}, - file = {/Users/fabio/Zotero/storage/FRUTQ4SB/full-text.pdf} -} - -@article{Yan2009, - title = {Rapid {{Prototyping}} and {{Manufacturing Technology}}: {{Principle}}, {{Representative Technics}}, {{Applications}}, and {{Development Trends}}}, - author = {Yan, Yongnian and Li, Shengjie and Zhang, Renji and Lin, Feng and Wu, Rendong and Lu, Qingping and Xiong, Zhuo and Wang, Xiaohong}, - year = {2009}, - month = jun, - journal = {Tsinghua Science \& Technology}, - volume = {14}, - number = {June}, - pages = {1--12}, - publisher = {{Tsinghua University Press}}, - issn = {10070214}, - doi = {10.1016/S1007-0214(09)70059-8}, - urldate = {2013-03-06}, - keywords = {biomanufacturing,dispersed-accumulated forming,moulding,rapid,rapid manufacturing,rapid moulding,rapid prototyping,rapid tooling}, - file = {/Users/fabio/Zotero/storage/2BRJT2YW/Rapid Prototyping and Manufacturing Technology Principle, Representative Technics, Applications, and Development Trends.pdf} -} - -@article{yanExtrusionWidthCritically2021, - ids = {yan2021a}, - title = {Extrusion Width Critically Affects Fibre Orientation in Short Fibre Reinforced Material Extrusion Additive Manufacturing}, - author = {Yan, Jiongyi and Demirci, Emrah and Ganesan, Ajith and Gleadall, Andrew}, - year = {2021}, - month = nov, - journal = {Additive Manufacturing}, - pages = {102496}, - publisher = {{Elsevier}}, - issn = {2214-8604}, - doi = {10.1016/J.ADDMA.2021.102496}, - urldate = {2021-12-01} -} - -@article{Yang2014, - title = {Advanced {{Shape Memory Technology}} to {{Reshape Product Design}}, {{Manufacturing}} and {{Recycling}}}, - author = {Yang, Wen and Lu, Haibao and Huang, Wei and Qi, Hang and Wu, Xue and Sun, Ke}, - year = {2014}, - month = aug, - journal = {Polymers}, - volume = {6}, - number = {8}, - pages = {2287--2308}, - issn = {2073-4360}, - doi = {10.3390/polym6082287}, - abstract = {This paper provides a brief review on the advanced shape memory technology (ASMT) with a focus on polymeric materials. In addition to introducing the concept \textbackslash r\textbackslash nand fundamentals of the ASMT, the potential applications of the ASMT either alone or integrated with an existing mature technique (such as, 3D printing, quick response (QR) code, lenticular lens) and phenomena (e.g., wrinkling and stress-enhanced swelling effect) in product design, manufacturing, and recycling are demonstrated. It is concluded that the ASMT is indeed able to provide a range of powerful approaches to reshape part of the life cycle or the whole life cycle of products.}, - isbn = {2073-4360}, - keywords = {Design,Manufacturing,Recycling,Shape memory effect,Shape memory technology}, - file = {/Users/fabio/Zotero/storage/NC87R3R6/Yang et al. - 2014 - Advanced Shape Memory Technology to Reshape Product Design, Manufacturing and Recycling.pdf} -} - -@article{Yang2015, - ids = {yang2015}, - title = {Additive Manufacturing-Enabled Design Theory and Methodology: A Critical Review}, - author = {Yang, Sheng and Zhao, Yaoyao Fiona}, - year = {2015}, - journal = {International Journal of Advanced Manufacturing Technology}, - volume = {80}, - number = {1-4}, - pages = {327--342}, - publisher = {{Springer London}}, - issn = {14333015}, - doi = {10.1007/s00170-015-6994-5}, - abstract = {As additive manufacturing (AM) process evolves from rapid prototyping to the end-of-use product manufacturing process, manufacturing constraints have largely been alleviated and design freedom has been significantly broadened, including shape complexity, material complexity, hierarchical complexity, and functional complexity. Inevitably, conventional Design Theory and Methodology (DTM) especially life-cycle objectives oriented ones are challenged. In this paper, firstly, the impact of AM on conventional DTM is analyzed in terms of design for manufacturing (DFM), design for assembly (DFA), and design for performance (DFP). Abundance of evidences indicate that conventional DTM is not qualified to embrace these new opportunities and consequently underline the need for a set of design principles for AM to achieve a better design. Secondly, design methods related with AM are reviewed and classified into three main groups, including design guidelines, modified DTM for AM, and design for additive manufacturing (DFAM). The principles and representative design methods in each category are studied comprehensively with respect to benefits and drawbacks. A new design method partially overcoming these drawbacks by integrating function integration and structure optimization to realize less part count and better performance is discussed. Design tools as a necessary part for supporting design are also studied. In the meantime, the review also identified the possible areas for future research.}, - isbn = {02683768 (ISSN)}, - keywords = {Additive manufacturing,Design theory and methodology,Function integration,Part consolidation}, - file = {/Users/fabio/Zotero/storage/QU2DQF4N/Additive manufacturing-enabled design theory and methodology a critical review.pdf} -} - -@article{Yang2019, - title = {Product-Service System Business Model Archetypes and Sustainability}, - author = {Yang, Miying and Evans, Steve}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {220}, - pages = {1156--1166}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.067}, - file = {/Users/fabio/Zotero/storage/2PG7S366/Product-service system business model archetypes and sustainability.pdf} -} - -@article{yangAdoptionDigitalTechnologies2021, - title = {The Adoption of Digital Technologies in Supply Chains: {{Drivers}}, Process and Impact}, - author = {Yang, Miying and Fu, Mingtao and Zhang, Zihan}, - year = {2021}, - month = aug, - journal = {Technological Forecasting and Social Change}, - volume = {169}, - pages = {120795}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120795}, - urldate = {2021-04-29} -} - -@article{yangEmotionalDesignSmart2021, - title = {Emotional Design for Smart Product-Service System: {{A}} Case Study on Smart Beds}, - author = {Yang, Xian and Wang, Ronghuan and Tang, Chaolan and Luo, Lihong and Mo, Xiaohong}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {298}, - pages = {126823}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126823}, - urldate = {2021-04-30}, - abstract = {Smart products typically have a strong sense of technology but rarely consider factors related to emotional design, thus keeping users at a distance. Human-centric emotional design can enhance the stickiness of products and maximize product use. To include emotional factors in the design of smart products, this paper constructed a top-down development method for smart product-service systems (PSS). First, we proposed an expanding three-level theory of emotional design (ETTED) to construct a user requirement framework. ETTED expands the connotation and extension of the three-level theory of emotional design (TTED) and can guide emotional design in detail. Second, the analytic hierarchy process (AHP) and fuzzy comprehensive evaluation (FCE) were proposed to perform a quantitative calculation on fine-grained requirements to distinguish the influence of each requirement in design practice. Finally, a smart bed with emotional factors was designed according to the requirements and their weights. To evaluate this development method with regard to mitigating the lack of emotional factors used to design Smart PSS, an eye-tracking experiment on the design of smart beds was conducted to verify the requirement framework based on ETTED and the requirement measurement method based on AHP and FCE. The eye-tracking data included participants' pupil dilation and other physiological indicators of eye movements, which showed that the smart bed designed based on the development method for Smart PSS was more attractive than other similar products on Amazon. The method proposed in this paper is a top-down, quantitative and objective method that mitigates the lack of emotional factors considered in smart products design. Thus, the proposed method can be used as a systematic development method with Smart PSS.}, - keywords = {Development method,Emotional design,Eye movement tracking,Quantitative calculation,Smart PSS} -} - -@article{yangImprovedAccuracyFDM2021, - title = {Improved Accuracy of an {{FDM 3D}} Printer Using a Face-Diagonal Length Test Using an Artifact and a {{Vernier}} Caliper}, - author = {Yang, Seung Han and Lee, Kwang Il}, - year = {2021}, - journal = {Rapid Prototyping Journal}, - volume = {27}, - number = {7}, - pages = {1318--1326}, - publisher = {{Emerald Publishing Limited}}, - issn = {1355-2546}, - doi = {10.1108/RPJ-04-2019-0101}, - urldate = {2021-08-23}, - abstract = {The purpose of this study is to improve the accuracy of a fused deposition modeling three-dimensional (3D) printer by identifying and compensating for position-independent geometric errors using a face-diagonal length test featuring a designed artifact and a Vernier caliper.,An artifact that does not require support when printing was designed and printed to allow performance of the face-diagonal length test. A Vernier caliper was used to measure the lengths of diagonals in the XY, YZ and ZX planes of the printed artifact specimen; this completed the face-diagonal length test. The relationships between position-independent geometric errors of the linear axes X, Y and Z and the measured diagonal lengths of the three planes were determined to identify geometric errors.,The approach was applied to a commercial fused deposition modeling 3D printer, and three position-independent geometric errors were rapidly identified. The artifact was re-printed after model-based compensation for these errors and the diagonal lengths were re-measured. The results were verified via coordinate measuring machine measurement of a simple test piece without and with model-based compensation for identified geometric errors. Furthermore, the proposed approach was applied to a commercial 3D printer.,The measured diagonal lengths of the printed artifacts varied greatly. Thus, further studies should investigate the effects of printing materials and parameters on the length discrepancies of 3D printed artifacts.,A software-based compensation of identified position-independent geometric errors has to be used at commercial 3D printers for accuracy improvements of printed parts.,Thus, the approach is of practical utility; it can be periodically used to identify position-independent geometric errors and ensure that the 3D printer is consistently accurate.}, - keywords = {Accuracy,Face-diagonal length test,Fused deposition modeling 3D printer,Position-independent geometric error,Vernier caliper} -} - -@article{yangWillingnessParticipateTakeout2021, - title = {Willingness to Participate in Take-out Packaging Waste Recycling: {{Relationship}} among Effort Level, Advertising Effect, Subsidy and Penalty}, - author = {Yang, Jiahui and Long, Ruyin and Chen, Hong and Cheng, Xiu}, - year = {2021}, - month = feb, - journal = {Waste Management}, - volume = {121}, - pages = {141--152}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2020.12.005}, - urldate = {2021-01-01} -} - -@article{yanPaymentsEcosystemServices2022, - title = {Payments for Ecosystem Services as an Essential Approach to Improving Ecosystem Services: {{A}} Review}, - shorttitle = {Payments for Ecosystem Services as an Essential Approach to Improving Ecosystem Services}, - author = {Yan, Haiming and Yang, Huicai and Guo, Xiaonan and Zhao, Shuqin and Jiang, Qun'ou}, - year = {2022}, - month = nov, - journal = {Ecological Economics}, - volume = {201}, - pages = {107591}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2022.107591}, - urldate = {2022-09-01}, - abstract = {There remain considerable controversies over payments for ecosystem services (PES) as an essential approach to improving ecosystem services. This study reviewed various definitions of PES and explored its economic nature; then explored previous methods for estimating the PES standard and finally proposed possible agendas for future PES research. Results suggested the PES and traditional land rent both originate from the monopoly of the providers on use rights of land vital to provision of certain ecosystem services, therefore PES should be redefined as a special kind of land rent for sharing land use rights of the providers to guarantee sustainable provision of certain ecosystem services. Besides, there has been no universal methods for estimating the rational PES standard due to insufficient understanding of the economic cause and nature of the PES. Re-imagining and re-designing PES as a system of land rights is advantageous to clearing up misunderstanding and disputes over the economic cause and nature of PES and overcoming limitations of existing methods for estimating the PES standard. Additionally, it is necessary to further improve the PES schemes based on cost-efficiency and explore the methods for estimating the PES standard based on the land rent theory and interdisciplinary knowledge.}, - langid = {english}, - keywords = {Ecosystem service value,Ecosystem services,Land rent,Land use rights,PES}, - file = {/Users/fabio/Zotero/storage/IRXSCL6W/S0921800922002531.html} -} - -@article{yanSinglefilamentwideTensiletestingSpecimens2023, - title = {Single-Filament-Wide Tensile-Testing Specimens Reveal Material-Independent Fibre-Induced Anisotropy for Fibre-Reinforced Material Extrusion Additive Manufacturing}, - author = {Yan, Jiongyi and Demirci, Emrah and Gleadall, Andrew}, - year = {2023}, - month = jan, - journal = {Rapid Prototyping Journal}, - volume = {ahead-of-print}, - number = {ahead-of-print}, - issn = {1355-2546}, - doi = {10.1108/RPJ-09-2022-0301}, - urldate = {2023-05-11}, - abstract = {Purpose This study/paper aims to develop fundamental understanding of mechanical properties for multiple fibre-reinforced materials by using a single-filament-wide tensile-testing approach. Design/methodology/approach In this study, recently validated single-filament-wide tensile-testing specimens were used for four polymers with and without short-fibre reinforcement. Critically, this specimen construct facilitates filament orientation control, for representative longitudinal and transverse composite directions, and enables measurement of interlayer bonded area, which is impossible with ``slicing'' software but essential in effective property measurement. Tensile properties were studied along the direction of extruded filaments (F) and normal to the interlayer bond (Z) both experimentally and theoretically via the Kelly\textendash Tyson model, bridging model and Halpin\textendash Tsai model. Findings Even though the four matrix-material properties varied hugely (1,440\% difference in ductility), consistent material-independent trends were identified when adding fibres: ductility reduced in both F- and Z-directions; stiffness and strength increased in F but decreased or remained similar in Z; Z:F strength anisotropy and stiffness anisotropy ratios increased. Z:F strain-at-break anisotropy ratio decreased; stiffness and strain-at-break anisotropy were most affected by changes to F properties, whereas strength anisotropy was most affected by changes to Z properties. Originality/value To the best of the authors' knowledge, this is the first study to assess interlayer bond strength of composite materials based on measured interlayer bond areas, and consistent fibre-induced properties and anisotropy were found. The results demonstrate the critical influence of mesostructure and microstructure for three-dimensional printed composites. The authors encourage future studies to use specimens with a similar level of control to eliminate structural defects (inter-filament voids and non-uniform filament orientation).}, - keywords = {3D printing,Anisotropy,Fibre-reinforced polymer composites,Modified rule of mixtures,Tensile properties}, - file = {/Users/fabio/Zotero/storage/CGRDUFQU/html.html} -} - -@article{Yao2019, - title = {A Method to Predict the Ultimate Tensile Strength of {{3D}} Printing Polylactic Acid ({{PLA}}) Materials with Different Printing Orientations}, - author = {Yao, Tianyun and Deng, Zichen and Zhang, Kai and Li, Shiman}, - year = {2019}, - journal = {Composites Part B: Engineering}, - volume = {163}, - pages = {393--402}, - issn = {13598368}, - doi = {10.1016/j.compositesb.2019.01.025}, - urldate = {2021-01-15}, - abstract = {3D Printing is widely used in scientific researches and engineering applications, ranging from aerospace to biomedicine. However little is known about the mechanical properties of 3D printing materials. In order to promote the mechanical analysis and design of 3D printing structures, the ultimate tensile strength of FDM PLA materials with different printing angles were studied theoretically and experimentally. A theoretical model was firstly established to predict the ultimate tensile strength of FDM PLA materials based on transverse isotropic hypothesis, classical lamination theory and Hill-Tsai anisotropic yield criterion, and then verified by tensile experiments. Compared with previous models, this model provided two kinds of in-plane shear modulus calculation methods, so the calculation results were more reliable. The specimens, designed according to the current plastic-multipurpose test specimens standard ISO 527-2-2012, were printed in seven different angles (0 {$\circ$} , 15 {$\circ$} , 30 {$\circ$} , 45 {$\circ$} , 60 {$\circ$} , 75 {$\circ$} , 90 {$\circ$} ) with three layer thicknesses (0.1 mm, 0.2 mm, 0.3 mm) for each angle. The relative residual sum of squares between theoretical data and experimental data were all close to zero, so the results that the theoretical model can accurately predict the ultimate tensile strength of FDM materials for all angles and thicknesses were confirmed. It was also found that the ultimate tensile strength decreased as the printing angle becomes smaller or the layer becomes thicker. This theoretical model and experimental method can also be applied to other 3D printing materials fabricated by FDM or SLA techniques.}, - keywords = {3D printing,Anisotropic yield criterion,Transverse isotropy,Ultimate tensile strength}, - file = {/Users/fabio/Zotero/storage/8PT5BYHE/full-text.pdf} -} - -@inproceedings{Yardimci1996, - title = {Part {{Quality Prediction Tools}} for {{Fused Deposition Processing}}}, - booktitle = {Proceedings of {{Solid Freeform Fabrication Symposium}}}, - author = {Yardimci, M Atif and Guceri, Selcuk I and Agarwala, Mukesh and Danforth, Stephen C}, - year = {1996}, - pages = {539--548}, - file = {/Users/fabio/Zotero/storage/8UKRQBH5/Yardimci et al. - 1996 - Part Quality Prediction Tools for Fused Deposition Processing.pdf} -} - -@inproceedings{Yardimci1997, - title = {Thermal Analysis of Fused Deposition}, - booktitle = {Solid {{Freeform Fabrication Proceedings}}}, - author = {Yardimci, M Atif and Hattori, Takeshi and Guceri, Selcuk I}, - year = {1997}, - pages = {689--698}, - file = {/Users/fabio/Zotero/storage/X9Y5TY3Y/Yardimci, Hattori, Guceri - 1997 - Thermal analysis of fused deposition.pdf} -} - -@book{Yarsley1941, - title = {Plastics}, - author = {Yarsley, V. E and Couzens, E. G}, - year = {1941}, - publisher = {{Allen Lane, Penguin Books}} -} - -@article{Yeh2018, - title = {Critical Success Factors for Adoption of {{3D}} Printing}, - author = {Yeh, Ching Chiang and Chen, Yi Fan}, - year = {2018}, - month = jul, - volume = {132}, - pages = {209--216}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2018.02.003}, - abstract = {Although 3D printing is a collection of digital manufacturing technologies, the speed of its adoption has not been quite what the market has expected. The purpose of this research is to examine the organizational perspectives and factors that are influencing the adoption of 3D printing. This paper presents a hybrid approach to the integrated analytic hierarchy process (AHP) and the technology-organizational-environment (TOE) framework, in order to set up a proper evaluation model that can prioritize the impact of such factors. An empirical study has been carried out on Taiwanese manufacturing enterprises, a considerable amount of information has been revealed that can help manufacturers understand those key factors better. Finally, the results herein provide decision-makers a way to discover more effective strategies to adopt 3D printing.}, - keywords = {3D printing,Additive manufacturing (AM),Critical success factors,Fuzzy AHP,Technology-organization-environment (TOE) framework} -} - -@article{yeThereMarketUpcycled2022, - title = {Is There a Market for Upcycled Pet Food?}, - author = {Ye, Hongjun and Bhatt, Siddharth and Deutsch, Jonathan and Suri, Rajneesh}, - year = {2022}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {343}, - pages = {130960}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2022.130960}, - urldate = {2022-03-13}, - abstract = {Abstract Globally, many attempts are being made to reduce food waste. A remarkable new solution is upcycling. Upcycled food uses food ingredients that are safe for consumption but are generally discarded. An emerging body of literature suggests that human consumers may be willing to buy and consume such foods for their own consumption. However, humans are not the only consumers in the food chain. One of the fastest growing segments in the food industry is pet food. Will pet owners be willing to purchase upcycled pet foods for their pets to consume? We provide the first assessment of acceptance of upcycled pet foods. We find that pet owners perceive upcycled pet foods to be superior in quality and sustainability than comparable conventional pet foods at an inexpensive price point, but not at an expensive price point. Findings from this research provide actionable insights for practitioners wanting to venture in upcycled pet foods.} -} - -@article{Yi2004, - title = {Study of the Key Technologies of {{LOM}} for Functional Metal Parts}, - author = {Yi, Shuping and Liu, Fei and Zhang, Jin and Xiong, Shiquan}, - year = {2004}, - journal = {Journal of Materials Processing Technology}, - volume = {150}, - number = {1-2}, - pages = {175--181}, - issn = {09240136}, - doi = {10.1016/j.jmatprotec.2004.01.035}, - abstract = {To address the problems associated with laminated object manufacturing (LOM) using sheet metal as a modeling material, an approach of cutting the sheet metals by a new LOM process and connecting them by diffusion welding technology is proposed. The conventional LOM process and the new LOM process are compared with reference to the theoretical manufacturing error. A slicing algorithm for the new LOM process has been deduced. The conclusions drawn from the experiments and analysis are shrinkage in the stack direction is small; atom diffusion between two joints occurs clearly and new grains form; the shear strength of the welding zone is above 100 MPa; the micro-hardness of the welding zone is almost the same as that of the substrate. The fabrication of sample part suggests that the new LOM process with diffusion welding could be a useful method for the rapid manufacturing of metal parts. ?? 2004 Published by Elsevier B.V.}, - isbn = {0924-0136}, - keywords = {Dimensional accuracy,Laminated object manufacturing,Sheet metal,Welding}, - file = {/Users/fabio/Zotero/storage/95B54YS2/Yi et al. - 2004 - Study of the key technologies of LOM for functional metal parts.pdf} -} - -@article{Yi2021, - title = {Journal {{Pre-proof Process}} Monitoring of Economic and Environmental Performance of a Material Extrusion Printer Using an Augmented Reality-Based Digital Twin}, - author = {Yi, Li and Glatt, Moritz and Ehmsen, Svenja and Duan, Wentao and Aurich, Jan C}, - year = {2021}, - volume = {48}, - doi = {10.1016/j.addma.2021.102388}, - keywords = {additive manufacturing}, - file = {/Users/fabio/Zotero/storage/2JQP83NF/digital twin.pdf} -} - -@article{yigitcanlarPostAnthropocentricCitiesReconceptualizing2019, - title = {Towards {{Post-Anthropocentric Cities}}: {{Reconceptualizing Smart Cities}} to {{Evade Urban Ecocide}}}, - author = {Yigitcanlar, Tan and Foth, Marcus and Kamruzzaman, Md}, - year = {2019}, - month = apr, - journal = {Journal of Urban Technology}, - volume = {26}, - number = {2}, - pages = {147--152}, - publisher = {{Routledge}}, - issn = {14661853}, - doi = {10.1080/10630732.2018.1524249}, - urldate = {2022-03-13}, - abstract = {This short piece acts as a coda to this journal's special issue on ``Smart Cities and Innovative Technologies.'' First, it provides a retrospective view of the origins of the smart city concept. The paper, secondly, presents the most recent perspectives on the new interpretations of the smart city notion. It then provides a commentary on the potential directions for a better reconceptualization of smart cities to evade a most likely urban ecocide. Lastly, the short communication concludes by asking two critical questions: (a) Will urban scholars, planners, designers, and activists be able to convince urban policymakers and the general public of the need for a post-anthropocentric urban turnaround? (b) How do the public, private, and academic sectors along with communities pave the way for post-anthropocentric cities and more-than-human futures?.}, - keywords = {Intelligent city,more-than-human city,post-anthropocentric city,responsive city,smart city,sustainable urban development,urban informatics} -} - -@article{Yin2018, - title = {Cold Spray Additive Manufacturing and Repair: {{Fundamentals}} and Applications}, - author = {Yin, Shuo and Cavaliere, Pasquale and Aldwell, Barry and Jenkins, Richard and Liao, Hanlin and Li, Wenya and Lupoi, Rocco}, - year = {2018}, - month = may, - journal = {Additive Manufacturing}, - volume = {21}, - number = {April}, - pages = {628--650}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2018.04.017}, - abstract = {Cold spray is a solid-state coating deposition technology which has recently been applied as an additive manufacturing process to fabricate individual components and to repair damaged components. In comparison with fusion-based high-temperature additive manufacturing processes, cold spray additive manufacturing (CSAM) has been shown to retain the original properties of the feedstock, to produce oxide-free deposits, and to not adversely influence underlying substrate materials during manufacture. Therefore, CSAM is attracting considerable attention from both scientific and industrial communities. Although CSAM is an emerging additive manufacturing technology, a body of work has been carried out by various research groups and the technology has been applied across a range of manufacturing areas. The purpose of this paper is to systematically summarize and review the CSAM-related work to date.}, - keywords = {Additive manufacturing,Cold spray,Machining,Manufacturing strategy,Repair,Restoration}, - file = {/Users/fabio/Zotero/storage/VZUVXJUX/Cold spray additive manufacturing and repair- Fundamentals andapplications.pdf} -} - -@article{yinCircularEconomyPractices2023, - title = {Circular Economy Practices and Sustainable Performance: {{A}} Meta-Analysis}, - shorttitle = {Circular Economy Practices and Sustainable Performance}, - author = {Yin, Shiyuan and Jia, Fu and Chen, Lujie and Wang, Qinru}, - year = {2023}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {190}, - pages = {106838}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106838}, - urldate = {2023-02-09}, - abstract = {This paper aims to investigate the relationship between circular economy (CE) practices and enterprise performance based on existing empirical studies adopting a meta-analysis method. By systematically reviewing the literature, we identify 41 papers published on this topic between 2005 and 2021. The key finding supports that CE practice has benefited both firms' commercial and ecological sustainability. The results also show that industry type, enterprise scale, and country have a moderating effect on the relationship between CE practices and sustainable performance. In addition, the results of this study can support managers to have greater confidence in adopting CE practices in order to improve both commercial and ecological performance. Further, this may be the first meta-analysis on this topic resolving the mixed results in the existing literature.}, - langid = {english}, - keywords = {Circular economy,Firm performance,Meta-analysis}, - file = {/Users/fabio/Zotero/storage/8I9SW55D/Yin et al. - 2023 - Circular economy practices and sustainable perform.pdf;/Users/fabio/Zotero/storage/V6N7VNQL/S092134492200670X.html} -} - -@article{Yip2017, - title = {Spurring Innovation in Spatial Haptics: {{How}} Open-Source Hardware Can Turn Creativity Loose}, - author = {Yip, Michael C. and Forsslund, Jonas}, - year = {2017}, - month = mar, - journal = {IEEE Robotics and Automation Magazine}, - volume = {24}, - number = {1}, - pages = {65--76}, - issn = {1070-9932}, - doi = {10.1109/MRA.2016.2646748} -} - -@article{yipIdentificationStakeholderRelated2021, - title = {Identification of Stakeholder Related Barriers in Sustainable Manufacturing Using {{Social Network Analysis}}}, - author = {Yip, W.S. and To, S.}, - year = {2021}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {27}, - pages = {1903--1917}, - publisher = {{Elsevier}}, - issn = {23525509}, - doi = {10.1016/j.spc.2021.04.018}, - urldate = {2021-05-17} -} - -@article{Yoon2014, - title = {A Comparison of Energy Consumption in Bulk Forming, Subtractive, and Additive Processes: {{Review}} and Case Study}, - author = {Yoon, Hae-Sung and Lee, Jang-Yeob and Kim, Hyung-Soo and Kim, Min-Soo and Kim, Eun-Seob and Shin, Yong-Jun and Chu, Won-Shik and Ahn, Sung-Hoon}, - year = {2014}, - month = jul, - journal = {International Journal of Precision Engineering and Manufacturing-Green Technology}, - volume = {1}, - number = {3}, - pages = {261--279}, - issn = {2288-6206}, - doi = {10.1007/s40684-014-0033-0}, - abstract = {In addition to the steps taken to ensure optimal efficiency in industry, significant effort has been directed towards the green and sustainable manufacturing practices. In this paper, we review conventional and state-of-the-art manufacturing technologies to provide insight into energy consumption at the processing level. In the review, collected energy data were summarized for three manufacturing categories: conventional bulk-forming, subtractive, and additive manufacturing (AM) processes. Additive processes, in particular, are strongly emphasized in the Advanced Manufacturing Initiatives proposed recently by the United States government. Currently, the specific energy consumption (SEC) of additive processes is estimated to be {$\sim$}100-fold higher than that of conventional bulk-forming processes, with subtractive processes showing intermediate values that varied over a wide range in terms of scale. Although SEC may vary with respect to the details, in general, the research showed a negative correlation with respect to the reciprocal logarithmic form of the productivity. In addition to the literature review presented, we performed case studies for the three manufacturing processes, to provide practical examples of energy consumption. Additionally, our results indicated that AM processes may require more extensive evaluation; i.e.; an assessment of the entire manufacturing cycle, for more accurate prediction of the subsequent environmental impact. \textcopyright{} 2014 Korean Society for Precision Engineering.}, - isbn = {2198-0810}, - keywords = {Electricity consumption,Green manufacturing,Manufacturing initiatives,Manufacturing processes,Specific energy consumption (SEC),Sustainability}, - file = {/Users/fabio/Zotero/storage/J8WE2KPT/Yoon et al. - 2014 - A comparison of energy consumption in bulk forming, subtractive, and additive processes Review and case study.pdf} -} - -@article{yoonDoItYourselfLaboratoriesAttitude2020, - title = {Do-{{It-Yourself}} Laboratories and Attitude toward Use: {{The}} Effects of Self-Efficacy and the Perception of Security and Privacy}, - author = {Yoon, Jeewhan and Vonortas, Nicholas S. and Han, SungWon}, - year = {2020}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {159}, - pages = {120192}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120192}, - urldate = {2020-07-20} -} - -@article{You2020, - title = {The Business Model of {{Do-It-Yourself}} ({{DIY}}) Laboratories \textendash{} {{A}} Triple-Layered Perspective}, - author = {You, Weimu and Chen, Weifeng and Agyapong, Michael and Mordi, Chima}, - year = {2020}, - month = oct, - journal = {Technological Forecasting and Social Change}, - volume = {159}, - pages = {120205}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120205}, - urldate = {2020-08-13}, - file = {/Users/fabio/Zotero/storage/4YCWZCS3/Innovation Labs.pdf} -} - -@article{Yu2018, - title = {Prototyping in Theory and in Practice: {{A}} Study of the Similarities and Differences between Engineers and Designers}, - author = {Yu, Fei and Pasinelli, Michele and Brem, Alexander}, - year = {2018}, - journal = {Creativity and Innovation Management}, - volume = {27}, - number = {2}, - pages = {121--132}, - issn = {14678691}, - doi = {10.1111/caim.12242}, - abstract = {Prototyping can be seen as the heart of the innovation process. Typically, engineers and designers both work on prototyping activities, but their diverse backgrounds make for different perspectives on prototyping. Based on earlier literature, this study investigates commonalities and differences in the prototyping behavior of engineers and designers. For this study, semi-structured interviews and workshops with different experiments were conducted. Using low-fidelity prototypes, our results indicated that there are differences in the early phase of prototyping. Engineers focused on the features and functions of a prototype and needed to meet specific goals in order to push the process forward. Designers, on the other hand, used prototypes to investigate the design space for new possibilities, and were more open to a variety of prototyping materials and tools, especially for low-fidelity prototypes. In the later prototyping phases, the prototyping behaviors of engineers and designers became similar. Our study contributes to the understanding of prototyping purposes, activities, and processes across disciplines, and supports the management of prototyping in new product development processes.}, - file = {/Users/fabio/Zotero/storage/64BCKUWN/Yu, Pasinelli, Brem - 2017.pdf} -} - -@article{Yu2019, - title = {Measuring {{Ecological Capital}}: {{State}} of the {{Art}}, {{Trends}}, and {{Challenges}}}, - author = {Yu, Huajun and Wang, Yutao and Li, Xiao and Wang, Chengdong and Sun, Mingxing and Du, Anshu}, - year = {2019}, - journal = {Journal of Cleaner Production}, - publisher = {{Elsevier B.V.}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.014}, - file = {/Users/fabio/Zotero/storage/WYGJ2HHQ/Measuring Ecological Capital- State of the Art, Trends, and Challenges.pdf} -} - -@article{Yuan2001, - title = {Characterization of Poly({{L-lactic}} Acid) Fibers Produced by Melt Spinning}, - author = {Yuan, Xiaoyan and Mak, Arthur F. T. and Kwok, K. W. and Yung, Brian K O and Yao, Kangde}, - year = {2001}, - month = jul, - journal = {Journal of Applied Polymer Science}, - volume = {81}, - number = {1}, - pages = {251--260}, - issn = {0021-8995}, - doi = {10.1002/app.1436}, - urldate = {2014-09-12}, - keywords = {biodegradable fibers,l -lactic acid,melt spinning,molecular weight,poly,tensile properties,viscosity-average}, - file = {/Users/fabio/Zotero/storage/YV6NQ6JJ/Yuan et al. - 2001 - Characterization of poly(L-lactic acid) fibers produced by melt spinning.pdf} -} - -@article{Yuan2008, - title = {The {{Circular Economy}}: {{A New Development Strategy}} in {{China}}}, - author = {Yuan, Zengwei and Bi, Jun and Moriguichi, Yuichi}, - year = {2008}, - month = feb, - journal = {Journal of Industrial Ecology}, - volume = {10}, - number = {1-2}, - eprint = {1011.1669v3}, - pages = {4--8}, - issn = {10881980}, - doi = {10.1162/108819806775545321}, - abstract = {Since the late 1970's, China's transformation from a planned economy to one that is market-based and open to foreign trade and investment has fuelled economic development. Rapid economic growth has helped China to become one of the most important world economic powers, increasing the wealth of the population and providing employment and business opportunities. The rapid economic growth, however has engendered serious natural resource depletion and environmental pollution, and the continuing increase of population has exacerbated this situation. As the results of resource depletion and environmental negligence have become visible, Chinese society and decision makers have realized the seriousness of the situation. The concept of a circular economy (CE) was first proposed by scholars in China in 1998 and formally accepted in 2002 by the central government as a new development strategy that aims to alleviate the contradiction between rapid economic growth and the shortage of raw materials and energy.}, - archiveprefix = {arxiv}, - isbn = {1530-9290}, - pmid = {27008952}, - keywords = {1120:Economic policy \& planning,1300:International trade \& foreign investment,1540:Pollution control,9130:Experimental/theoretical,9179:Asia \& the Pacific,China,Economic development,Economic policy,Environmental policy,Environmental Studies,International trade,Studies} -} - -@article{Yuan2011, - title = {Thermal {{Conductivity Measurments}} of {{Polyamide}} 12}, - author = {Yuan, Mengqi and Bourell, David and Diller, Tim}, - year = {2011}, - journal = {Laboratory for Freeform Fabrication}, - number = {1}, - pages = {427--437}, - file = {/Users/fabio/Zotero/storage/AIHH3LGI/Yuan, Bourell, Diller - 2011 - Thermal Conductivity Measurments of Polyamide 12.pdf} -} - -@article{Yuan2020, - title = {Necessary Conditions for Coordination of Dual-Channel Closed-Loop Supply Chain}, - author = {Yuan, Yanhong and Yang, Jinyao and Li, Yang and Li, Wei}, - year = {2020}, - month = feb, - journal = {Technological Forecasting and Social Change}, - volume = {151}, - pages = {119823}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119823} -} - -@article{yuExploringEssentialFactors2022, - ids = {yu2022a}, - title = {Exploring Essential Factors to Improve Waste-to-Resource Recovery: {{A}} Roadmap towards Sustainability}, - author = {Yu, Zhang and Khan, Syed Abdul Rehman and Ponce, Pablo and {Zia-ul-haq}, Hafiz Muhammad and Ponce, Katerine}, - year = {2022}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {350}, - pages = {131305}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131305}, - urldate = {2022-04-11}, - keywords = {Environmental technology,Quantile regression,Sustainable development,Waste management,Waste recovery}, - file = {/Users/fabio/Zotero/storage/ZPEZAMH2/Yu et al. - 2022 - Exploring essential factors to improve waste-to-re.pdf;/Users/fabio/Zotero/storage/TDGG8BH3/S0959652622009349.html} -} - -@article{yuIdentifyingRegionalDisparities2021, - title = {Identifying the Regional Disparities of Ecosystem Services from a Supply-Demand Perspective}, - author = {Yu, Huajun and Xie, Wei and Sun, Lin and Wang, Yutao}, - year = {2021}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {169}, - pages = {105557}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105557}, - urldate = {2021-03-14} -} - -@article{yuInsightQuantitiesFlows2023, - title = {Insight into Quantities, Flows, and Recycling Technology of {{E-waste}} in {{China}} for Resource Sustainable Society}, - author = {Yu, Zhichong and Gao, Chenqi and Yang, Caoyu and Zhang, Lingen}, - year = {2023}, - month = jan, - journal = {Journal of Cleaner Production}, - pages = {136222}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.136222}, - urldate = {2023-02-09}, - abstract = {The difficulty of tracking the metabolism of e-waste throughout its life cycle caused by scattered distribution has long constrained the development of the recycling industry and further policy making. In this study, the monitoring of Chinese e-waste, including sources, flows, scrap, and recycling potentials of electronic products, was measured and predicted based on data from both the government and 109 formal e-waste recycling enterprises. From 2009 to 2030, the inventory of electronic products is expected to increase due to overcapacity and near saturation of household possession. Meanwhile, the total amount of e-waste scrapping is predicted to increase from 1.77 million tons to 18.86 million tons, and the amount of generated e-waste will also increase, reaching 240 million tons by 2030. Currently, e-waste recycling is gradually becoming the official waste disposal approach. However, this newly emerged industry has numerous problems, such as lower recycling efficiency and scale, lack of advanced technologies, and corresponding laws and regulations. Hence, the data collected and analyzed in this study shed light on the e-waste market size in China. Meanwhile, to establish an ideal resource-sustainable society, suggestions regarding the optimization of the e-waste recycling industry through legal, reasonable, and efficient methods are put forward from our point of view.}, - langid = {english}, - keywords = {e-waste,Material flow analysis,Recycling enterprise,Standard recovery process}, - file = {/Users/fabio/Zotero/storage/GXCL2JXU/Yu et al. - 2023 - Insight into quantities, flows, and recycling tech.pdf;/Users/fabio/Zotero/storage/ZEVE57RT/S0959652623003803.html} -} - -@article{Yun2019, - title = {Smart {{City}} 4.0 from the {{Perspective}} of {{Open Innovation}}}, - author = {{Yun} and {Lee}}, - year = {2019}, - month = nov, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {5}, - number = {4}, - pages = {92}, - issn = {2199-8531}, - doi = {10.3390/joitmc5040092}, - abstract = {The purpose of a Smart City is to solve its inherent problems while simultaneously reducing its expenditure and improving its quality of life. Through the 4th Industrial Revolution technology, the advantages of Smart City are estimated to overcome the city's expenses with city platformization. While a city traditionally is the subject of creation and not consumption, a Smart City currently is the key industry in generating more than 60\% of its GDP in value creation from a production viewpoint. Moreover, with the expansion of online-offline convergence, cities can grow without limitation on its size, where connectivity and innovation determine the inclination of the city's benefit-cost curve. As a city platform is responsible for connectivity, its value drastically increases through the 4th Industrial Revolution's O2O (online to offline convergence) platform. When a city reflects on its own as a Digital Twin in the Cloud and when complete information becomes accessible through citizen's participation through smartphones (Edge), Self-organization takes place, an ideal linkage between the city and citizens. Cities go through the self-organizing process of complex adaptive systems like the human brain. This research proposes a future model of a ``Self-organizing City,'' and suggests implementing the Smart City model based on the Smart City Tech-Socio Model in implementing strategies.} -} - -@article{Yuriev2020, - title = {Pro-Environmental Behaviors through the Lens of the Theory of Planned Behavior: {{A}} Scoping Review}, - author = {Yuriev, Alexander and Dahmen, Mehdi and Paill{\'e}, Pascal and Boiral, Olivier and Guillaumie, Laurence}, - year = {2020}, - month = apr, - journal = {Resources, Conservation and Recycling}, - volume = {155}, - pages = {104660}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2019.104660}, - urldate = {2020-11-27}, - abstract = {The theory of planned behavior (TPB) allows researchers to identify the determinants of environmental behavior and subsequently target these factors in interventions. Multiple studies on conservation behaviors have recently applied this theoretical framework in both organizational and domestic settings. To shed more light on how the TPB was used in these studies, we conducted a literature review with the following objectives: 1) explore which individual green behaviors were studied though the lens of the TPB, 2) understand how scholars have used the theory and what variance the theory has helped to explain, and 3) formulate recommendations, if necessary, for improving the use of the theory. The review of the results from 126 publications demonstrated that the majority of scholars tend to overlook the importance of identifying and evaluating indirect variables (beliefs) that affect behaviors. More than half of the analyzed articles did not report the amount of explained variance, which undermines the principal strength of the theory. Scholars could obtain more substantial and consistent results if the guidelines regarding the application of the theory are consistently respected. More specifically, four aspects should be considered in the application of the theory: choice of framework, decision to extend the original model, methodology, and results. To help scholars overcome these commonly encountered problems, this article suggests a roadmap with several guiding questions and possible answers.}, - isbn = {2019.104660}, - keywords = {Green actions,Implementation guidelines,Literature review,Pro-environmental behavior,Theory of planned behavior,TPB applications}, - file = {/Users/fabio/Zotero/storage/MUUIJYDG/full-text.pdf} -} - -@article{Zacklad2021, - title = {Les Labs d'innovation Interne : Typologie Des Innovations, Approche Plateforme, R\^ole Du Design}, - author = {Zacklad, Manuel and Arruabarrena, B{\'e}a and {Berthinier-Poncet}, Anne and Guezel, Na{\"i}k}, - year = {2021}, - month = apr, - journal = {Approches Th\'eoriques en Information-Communication (ATIC)}, - volume = {N\textdegree{} 2}, - number = {1}, - pages = {127--161}, - issn = {2779-1106}, - doi = {10.3917/atic.002.0127}, - abstract = {This article presents the intermediate results of the ``Observatory of Innovation Labs'' research program born from the collaboration initiated several years ago between the Codesign-it collective and the National Conservatory of Arts and Crafts (CNAM). After a history of the emergence of internal labs in large companies and a presentation of the intervention research approach, we introduce a typology of innovations that they help to facilitate. We then report on the originality of internal labs by characterizing them as experiential innovation platforms dedicated to solving design problems. Finally, we present a typology of the design activities implemented by the labs to allow the resolution of these problems, design of solution, of relation and of environment.}, - file = {/Users/fabio/Zotero/storage/MH7G75ES/ATIC_002_0127.pdf} -} - -@article{Zaeh2011, - title = {Investigations on Heat Regulation of Additive Manufacturing Processes for Metal Structures}, - author = {Zaeh, M.F. and Ott, M.}, - year = {2011}, - month = jan, - journal = {CIRP Annals - Manufacturing Technology}, - volume = {60}, - number = {1}, - pages = {259--262}, - issn = {00078506}, - doi = {10.1016/j.cirp.2011.03.109}, - urldate = {2013-03-18}, - keywords = {selective laser melting,slm}, - file = {/Users/fabio/Zotero/storage/7YAYR5JK/Investigations on heat regulation of additive manufacturing processes for metal structures.pdf} -} - -@incollection{Zagel2017, - title = {{{3DPro}}\textemdash{{Development}} of {{Low-Cost Prosthetics Using 3D Printing Technologies}}}, - author = {Zagel, Christian and Huber, Sebastian and S{\"u}{\ss}muth, Jochen and Obermeier, Markus and Bodendorf, Freimut}, - year = {2017}, - volume = {494}, - pages = {93--99}, - doi = {10.1007/978-3-319-41947-3_10}, - isbn = {978-3-319-41946-6}, - file = {/Users/fabio/Zotero/storage/XIWKZ48I/3dpro-development of low-cost prosthetics using 3d printing technologies.pdf} -} - -@article{zaharudinSpatialInteractionModel2021, - title = {A Spatial Interaction Model for the Representation of User Access to Household Waste Recycling Centres}, - author = {Zaharudin, Zati Aqmar and Brint, Andrew and Genovese, Andrea and Piccolo, Carmela}, - year = {2021}, - month = may, - journal = {Resources, Conservation and Recycling}, - volume = {168}, - pages = {105438}, - publisher = {{Elsevier BV}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105438}, - urldate = {2021-02-14} -} - -@article{Zaheer2019, - title = {Digital Entrepreneurship: {{An}} Interdisciplinary Structured Literature Review and Research Agenda}, - author = {Zaheer, Hasnain and Breyer, Yvonne and Dumay, John}, - year = {2019}, - month = nov, - journal = {Technological Forecasting and Social Change}, - volume = {148}, - pages = {119735}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.119735} -} - -@article{zalasiewiczNewWorldAnthropocene2010, - ids = {zalasiewicz*2010}, - title = {The New World of the Anthropocene}, - author = {Zalasiewicz, J. A.N. and Williams, Mark and Steffen, Will and Crutzen, Paul}, - year = {2010}, - month = apr, - journal = {Environmental Science and Technology}, - volume = {44}, - number = {7}, - pages = {2228--2231}, - publisher = {{American Chemical Society}}, - doi = {10.1021/ES903118J}, - urldate = {2021-09-20}, - file = {/Users/fabio/Zotero/storage/EM7JYHWZ/full-text.pdf;/Users/fabio/Zotero/storage/G2BDF5LX/es903118j.html} -} - -@article{Zaldivar2017, - title = {Influence of Processing and Orientation Print Effects on the Mechanical and Thermal Behavior of {{3D-Printed ULTEM}}\textregistered{} 9085 {{Material}}}, - author = {Zaldivar, R.J. and Witkin, D.B. and McLouth, T. and Patel, D.N. and Schmitt, K. and Nokes, J.P.}, - year = {2017}, - month = jan, - journal = {Additive Manufacturing}, - volume = {13}, - pages = {71--80}, - publisher = {{Elsevier B.V.}}, - issn = {22148604}, - doi = {10.1016/j.addma.2016.11.007}, - abstract = {In this paper, we investigate the print orientation effects on the macrostructure, the mechanical and thermal properties, and the strain field behavior of ULTEM?? 9085 using a Stratasys Fused deposition modeling (FDM) 400 Printer. The tensile strength, failure strain, Poisson's ratio, coefficient of thermal expansion and modulus were all shown to vary significantly depending on the build orientation of identical dogbones. FDM parts ranged in strength from 46 to 85\% of strengths attainable from comparable injection-molded parts. The coefficient of variation (CV) increased from 2 to 13\% as the primary layer orientation deviated from the primary load direction. CAT scan and SEM were employed to relate the corresponding macrostructure to the mechanical response of the material along the parts??? 3-primary directions, using digital image correlation (DIC). The fracture surfaces of these parts further suggest that 3D FDM materials behave more like laminated composite structures than isotropic cast resins and therefore design allowables should reflect actual part build configurations.}, - keywords = {3d printing,Fracture surfaces,Fused deposition modeling,Orientation,Polymer,ULTEM?? 9085}, - file = {/Users/fabio/Zotero/storage/EKF7GVLN/Influence of processing and orientation print effects on the mechanical and thermal behavior of 3D-Printed ULTEM 9085 Material.pdf} -} - -@article{Zaman2019, - title = {Impact of Fused Deposition Modeling ({{FDM}}) Process Parameters on Strength of Built Parts Using {{Taguchi}}'s Design of Experiments}, - author = {uz Zaman, Uzair Khaleeq and Boesch, Emilien and Siadat, Ali and Rivette, Mickael and Baqai, Aamer Ahmed}, - year = {2019}, - month = apr, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {101}, - number = {5-8}, - pages = {1215--1226}, - issn = {0268-3768}, - doi = {10.1007/s00170-018-3014-6} -} - -@article{zambrano-monserrateEstimatingDamageCost2020, - title = {Estimating the Damage Cost of Plastic Waste in {{Galapagos Islands}}: {{A}} Contingent Valuation Approach}, - author = {{Zambrano-Monserrate}, Manuel A. and Ruano, Maria Alejandra}, - year = {2020}, - month = jul, - journal = {Marine Policy}, - volume = {117}, - pages = {103933}, - publisher = {{Pergamon}}, - issn = {0308-597X}, - doi = {10.1016/J.MARPOL.2020.103933}, - urldate = {2021-07-21}, - abstract = {Plastic waste affects various ecosystems in the world. The oceanic islands are one of the most affected places by this type of material. A significant case of plastic pollution occurs in the Galapagos Islands. The Galapagos Islands, located west of Ecuador, have one of the most biodiverse ecosystems on the planet. It is the home of unique species in the world, and since 1978 it has been considered as a Natural World Heritage. However, the Galapagos Islands are threatened by plastic pollution. Therefore, this study aims to quantify the cost of environmental damage generated by plastic waste in the Galapagos Islands. The non-market economic valuation approach was used to implement contingent valuation. It was determined that the Willingness to Pay of Ecuadorian families, to reduce plastic pollution, was between US\$ 4.90 - US\$ 14.51 per year, with a median of US\$ 7.65. This estimated value can serve as a reference to demand compensation from those who are generating pollution. At the end of the document, public policies are discussed based on the results obtained.}, - keywords = {Contingent valuation,Economic value,Ecuador,Galapagos islands,Plastic pollution} -} - -@article{Zanardini2016, - title = {Additive {{Manufacturing Applications}} in the {{Domain}} of {{Product Service System}}: {{An Empirical Overview}}}, - author = {Zanardini, Massimo and Bacchetti, Andrea and Zanoni, Simone and Ashourpour, Milad}, - year = {2016}, - journal = {Procedia CIRP}, - volume = {47}, - pages = {543--548}, - publisher = {{Elsevier B.V.}}, - issn = {22128271}, - doi = {10.1016/j.procir.2016.03.048}, - abstract = {This paper is a focus study to introduce an alternative approach to the existing ones, which could be taken to implement Additive Manufacturing (AM) systems for industrial applications. This approach is mainly based on the use of Product Service Systems (PSS) concept in order to turn AM into a more relevant field for service-based purposes within industrial applications. To do so, an AM profile, which is characterized with the similar notions forming the conceptual basis of PSS is detailed, and then the profile is framed for the new service oriented approach to highlight AM's competences in this field. Having found the interconnecting links between these two concepts, the intended approach for implementation would then be discussed and further developed in more detail to include the best use cases of the previous AM case studies as a guide on how to exploit AM's capabilities in similar ways, only modified for a given industrial business which is based on service development. The use cases would also introduce a few of the most successful examples in the production-service systems which have already taken advantage of three-dimensional printing (3D printing) which is one the subcategories of AM in lower tier (desktop) applications. These customer scale applications of 3D printing alongside portfolio analysis of AM in the field of industrial services could shed light for implementing further service-centric research in the advanced manufacturing systems.}, - isbn = {22128271 (ISSN)}, - keywords = {3D Printing,Additive Manufacturing,Case studies,Product Service Systems,Spare parts}, - file = {/Users/fabio/Zotero/storage/X53BPJ67/Additive Manufacturing Applications in the Domain of Product Service System An Empirical Overview.pdf} -} - -@article{Zander2018, - title = {Recycled Polyethylene Terephthalate as a New {{FFF}} Feedstock Material}, - author = {Zander, Nicole E. and Gillan, Margaret and Lambeth, Robert H.}, - year = {2018}, - month = may, - journal = {Additive Manufacturing}, - volume = {21}, - number = {January}, - pages = {174--182}, - publisher = {{Elsevier}}, - issn = {22148604}, - doi = {10.1016/j.addma.2018.03.007}, - abstract = {Reclaimed materials such as waste plastics can be utilized in additive manufacturing to improve the self-reliance of warfighters on forward operating bases by cutting costs and decreasing the demand for the frequent resupplying of parts by the supply chain. In addition, the use of waste materials in additive manufacturing in the private sector would reduce cost and increase sustainability, providing a high-value output for used plastics. Experimentation is conducted to process polyethylene terephthalate bottles and packaging into filament that can then be used for additive manufacturing methods like fused filament fabrication, without the use of additives or modification to the polymer. The chemistry of different polyethylene terephthalate recycled feedstocks was evaluated and found to be identical, and thus mixed feedstock processing is a suitable approach. Rheological data showed drying of the recycled polyethylene terephthalate led to an increase in the polymer's viscosity. Thermal and mechanical properties were evaluated for filament with different processing conditions, as well as printed and molded specimens. Crystallinity ranged from 12.2 for the water cooled filament, compared to 24.9\% for the filament without any active cooling. Tensile results show that the elongation to failure was similar to an injection molded part (3.5\%) and tensile strength of 35.1 {$\pm$} 8 MPa was comparable to commercial polycarbonate-ABS filament, demonstrating the robustness of the material. In addition, three point bending tests showed a similar load at failure for a select long-lead military part printed from the recycled filament compared to parts printed from commercial filament. Thus filament from recycled polyethylene terephthalate has the capability for replacing commercial filament in printing a diverse range of plastic parts.}, - keywords = {3D printing,DMA,DSC,FFF,Polyethylene terephthalate,Recycled plastics,Tensile}, - file = {/Users/fabio/Zotero/storage/CBAMPIPC/recycled polyethylene terephthalate as a new fff feedstock material .pdf} -} - -@article{Zander2019, - title = {Recycled Polypropylene Blends as Novel {{3D}} Printing Materials}, - author = {Zander, Nicole E. and Gillan, Margaret and Burckhard, Zachary and Gardea, Frank}, - year = {2019}, - month = jan, - journal = {Additive Manufacturing}, - volume = {25}, - pages = {122--130}, - issn = {22148604}, - doi = {10.1016/j.addma.2018.11.009}, - file = {/Users/fabio/Zotero/storage/49SLDXWL/Recycled polypropylene blends as novel 3D printing materials.pdf} -} - -@incollection{Zander2019a, - title = {Recycled {{Polymer Feedstocks}} for {{Material Extrusion Additive Manufacturing}}}, - booktitle = {{{ACS Symposium Series}}}, - author = {Zander, Nicole E.}, - year = {2019}, - month = jan, - volume = {1315}, - pages = {37--51}, - publisher = {{American Chemical Society}}, - issn = {19475918}, - doi = {10.1021/bk-2019-1315.ch003}, - isbn = {978-0-8412-3426-0}, - file = {/Users/fabio/Zotero/storage/NINIPLH2/Recycled Polymer Feedstocks for Material Extrusion Additive Manufacturing.pdf} -} - -@article{Zander2021, - title = {Rubber Toughened Recycled Polyethylene Terephthalate for Material Extrusion Additive Manufacturing}, - author = {Zander, Nicole E and Boelter, Zachary R}, - year = {2021}, - month = jun, - journal = {Polymer International}, - volume = {70}, - number = {6}, - pages = {742--748}, - issn = {0959-8103}, - doi = {10.1002/pi.6079} -} - -@article{zangMicroplasticsAgroecosystemAre2020, - title = {Microplastics in the Agroecosystem: {{Are}} They an Emerging Threat to the Plant-Soil System?}, - author = {Zang, Huadong and Zhou, Jie and Marshall, Miles R. and Chadwick, David R. and Wen, Yuan and Jones, Davey L.}, - year = {2020}, - month = sep, - journal = {Soil Biology and Biochemistry}, - volume = {148}, - pages = {107926}, - publisher = {{Pergamon}}, - issn = {0038-0717}, - doi = {10.1016/J.SOILBIO.2020.107926}, - urldate = {2022-01-13}, - abstract = {Despite plastics providing great benefits to our daily life, plastics accumulating in the environment, especially microplastics (MPs; defined as particles {$<$}5 mm), can lead to a range of problems and potential loss of ecosystem services. Current research has demonstrated the significant impact of MPs on aquatic systems, but little is known about their effects on the terrestrial environment, especially within agroecosystems. Hereby, we investigated the effect of MPs type and amount on plant growth, soil microorganisms, and photoassimilate carbon (C) allocation. MPs had a negative, dose-dependent impact on plant growth affecting both above- and below-ground productivity (-22.9\% and -8.4\%). MPs also influenced assimilated 14C allocation in soil (+70.6\%) and CO2 emission (+43.9\%). Although the activity of {$\beta$}-glucosidase was suppressed by MPs, other C- and N-cycling related enzyme activities were not affected. The type and amount of MPs in soil greatly altered C flow through the plant-soil system, highlighting that MPs negatively affect a range of C-dependent soil functions. Moreover, MPs increased the soil microbial biomass (+43.6\%; indicated by PLFAs), and changed the structure and metabolic status of the microbial community. The evidence presented here suggests that MPs can have a significant impact on key pools and fluxes within the terrestrial C cycle with the response being both dose-dependent and MPs specific. We conclude that MPs in soil are not benign and therefore every step should be made to minimise their entry into the soil ecosystem and potential to transfer into the food chain.}, - keywords = {Agroecosystem,Belowground C input,Plastic pollution,PLFA,Rhizosphere process} -} - -@article{Zanoni2019, - title = {Supply Chain Implications of Additive Manufacturing: A Holistic Synopsis through a Collection of Case Studies}, - author = {Zanoni, Simone and Ashourpour, Milad and Bacchetti, Andrea and Zanardini, Massimo and Perona, Marco}, - year = {2019}, - month = jun, - journal = {The International Journal of Advanced Manufacturing Technology}, - volume = {102}, - number = {9-12}, - pages = {3325--3340}, - issn = {0268-3768}, - doi = {10.1007/s00170-019-03430-w}, - file = {/Users/fabio/Zotero/storage/EL4C2G78/Supply chain implications of additive manufacturing a holistic synopsis through a collection of case studies.pdf} -} - -@article{zapataRelationshipClimateConditions2021, - title = {The Relationship between Climate Conditions and Consumption of Bottled Water: {{A}} Potential Link between Climate Change and Plastic Pollution}, - author = {Zapata, Oscar}, - year = {2021}, - month = sep, - journal = {Ecological Economics}, - volume = {187}, - pages = {107090}, - publisher = {{Elsevier}}, - issn = {09218009}, - doi = {10.1016/j.ecolecon.2021.107090}, - urldate = {2021-06-08} -} - -@article{Zarte2019, - title = {Decision {{Support Systems}} for {{Sustainable Manufacturing Surrounding}} the {{Product}} and {{Production Life Cycle}} \textendash{} {{A Literature Review}}}, - author = {Zarte, Maximilian and Pechmann, Agnes and Nunes, Isabel L.}, - year = {2019}, - journal = {Journal of Cleaner Production}, - volume = {219}, - pages = {336--349}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/J.JCLEPRO.2019.02.092}, - abstract = {Achieving sustainable manufacturing in enterprises in all three dimensions (economic, social, environmental) involves complex decision-making processes. New environmental regulations, requirements set by customers for sustainable products, and economic benefits through for example resource savings are drivers for enterprises to consider manufacturing from a sustainable perspective. To support decision makers in enterprises, decision-support systems can be used to analyze the production from a sustainable perspective and to create suggestions for optimization of products and processes. This literature review addresses decision-support systems for sustainable manufacturing and presents the most commonly used sustainable indicators and decision-making methods. The literature review is focused on research approach which consider all three dimensions of sustainability (economic, social, and environmental) and on decision support systems applied in the phases of the product and production life-cycle (product and production design, production planning, production, and remanufacturing of processes and products). The results of the review show, that current investigations of decision support systems are more focused on the integration of sustainability in all three dimensions (economic, environmental, and social) at the strategic planning level (design and remanufacturing of products and processes), which is not reflected well at the operational level (production planning and controlling), where decision-making is mostly driven by single sustainable dimensions (environmental and economic). In addition to economic and environmental objectives, sustainable production planning and controlling systems should also consider social planning objectives. Further research is required to identify which sustainable indicators can be considered in sustainable production planning and controlling systems.}, - keywords = {decision support systems}, - file = {/Users/fabio/Zotero/storage/2I39SUAV/Decision support systems for sustainable manufacturing surroundingthe product and production life cycleeA literature review.pdf} -} - -@article{Zawada2018, - title = {Multi-Layer Cryolithography for Additive Manufacturing}, - author = {Zawada, Bart{\l}omiej and Ukpai, Gideon and {Powell-Palm}, Matthew J. and Rubinsky, Boris}, - year = {2018}, - month = dec, - journal = {Progress in Additive Manufacturing}, - volume = {3}, - number = {4}, - pages = {245--255}, - publisher = {{Springer}}, - issn = {2363-9512}, - doi = {10.1007/s40964-018-0045-3}, - urldate = {2021-01-15}, - abstract = {A new technique is introduced which addresses the need for faster additive manufacturing methods for tissue scaffolds and frozen foods in large-scale industrial applications, inspired by print lithography. It is particularly relevant to biological matter, which is composed mostly of water. Instead of point-by-point printing in three dimensions (3D) with 3D printers, multiple single 2D layers can be assembled or printed separately, in parallel, on areas coated with hydrophilic materials to bind water-based compounds and hydrophobic materials to reject water-based compounds and bind hydrophobic molecules. This technique keeps the layers attached to the surface, opposing gravity, and thereby facilitating the transport and the assembly of the 2D layers, regardless of the direction of the surface relative to gravity. The individual layers are deposited one on top of the other and linked by chemical cross-linking and freezing to generate a 3D structure. Examples show how complex and large hydrogel-based structures can be manufactured by multi-layer cryolithography from fusion and freezing of 2D layers. Applications involve tissue engineering and food engineering, with particular emphasis on the ability to assemble a biological object, while every volume is frozen under optimal conditions during the assembly. Scanning electron microscopy demonstrates the ability to control and produce uniform microstructures in the 3D objects produced by cryolithography.}, - keywords = {3D print lithography,3D printing,Bioprinting,Cryolithography,Food printing,Tissue engineering} -} - -@book{Zehev2013, - title = {Principles of {{Polymer Processing}}}, - author = {Zehev, Tadmor and Gogos, Costas G.}, - year = {2013}, - publisher = {{John Wiley \& Sons.}}, - isbn = {978-0-471-38770-1}, - file = {/Users/fabio/Zotero/storage/WUUWLUFA/Principles of Polymer Processing.pdf} -} - -@article{Zein2002, - title = {Fused Deposition Modeling of Novel Scaffold Architectures for Tissue Engineering Applications}, - author = {Zein, Iwan and Hutmacher, Dietmar W. and Tan, Kim Cheng and Teoh, Swee Hin}, - year = {2002}, - month = feb, - journal = {Biomaterials}, - volume = {23}, - number = {4}, - pages = {1169--1185}, - issn = {01429612}, - doi = {10.1016/S0142-9612(01)00232-0}, - urldate = {2015-01-12}, - keywords = {21 tampines a v,529757,accepted 22 june 2001,ek en g ineerin,enue 1,g school,received 13 november 2000,sin g apore,temasek polytechnic}, - file = {/Users/fabio/Zotero/storage/TVSZBQUF/Zein et al. - 2002 - Fused deposition modeling of novel scaffold architectures for tissue engineering applications.pdf} -} - -@article{Zemigala2019, - title = {Tendencies in Research on Sustainable Development in Management Sciences}, - author = {Zemigala, Marcin}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {218}, - pages = {796--809}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.009} -} - -@article{Zeng2016, - title = {Public Perceptions and Economic Values of Source-Separated Collection of Rural Solid Waste: {{A}} Pilot Study in {{China}}}, - author = {Zeng, Chao and Niu, Dongjie and Li, Hangfen and Zhou, Tao and Zhao, Youcai}, - year = {2016}, - journal = {Resources, Conservation and Recycling}, - volume = {107}, - pages = {166--173}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2015.12.010}, - abstract = {The rapid urbanization progress and the continuous improvement of rural residents' living standard contribute to the increase of rural solid waste (RSW) in China. Based on direct face-to-face interview, a questionnaire survey consisting of 518 valid samples was performed to investigate rural households' behaviors towards RSW treatment and their perceptions in terms of awareness, attitudes on source-separated collection of RSW. Contingent valuation method (CVM) was employed to estimate respondents' willingness to pay (WTP) for RSW separation and management. Results indicated that some rural households had spontaneously separated the recyclable waste and food waste to some extent. The public were aware of the importance of RSW separation through various media. Further, more than half of households were willing to participate in the separation program. The dominant barriers of participation were the lack of awareness of separation, inconvenience and insufficient separation facility (53.7\%). In addition, 62.5\% of rural households had a positive WTP for RSW separation and management and the mean WTP was estimated to be 26.4 CNY/year. Age, annual household income and location significantly influenced the respondents' WTP. Therefore, we suggest that policy makers implement the pilot programs of RSW separation at source accordingly and devote efforts to providing collection service and improving RSW management by combining government financial budget and rural households' payment.}, - isbn = {09213449}, - keywords = {Public perception,Rural China,Rural solid waste,Source-separated collection,Willingness to pay}, - file = {/Users/fabio/Zotero/storage/WL9X7WML/Public perceptions and economic values of source-separated collection of rural solid waste A pilot study in China.pdf} -} - -@article{zengCanEcodesignPackaging2021, - title = {Can Eco-Design Packaging Reduce Consumer Food Waste? An Experimental Study}, - author = {Zeng, Tian and Durif, Fabien and Robinot, Elisabeth}, - year = {2021}, - month = jan, - journal = {Technological Forecasting and Social Change}, - volume = {162}, - pages = {120342}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2020.120342}, - urldate = {2020-10-05}, - file = {/Users/fabio/Zotero/storage/Z9AEEWKK/full-text.pdf} -} - -@article{Zenkiewicz2009a, - title = {Characterisation of Multi-Extruded Poly(Lactic Acid)}, - author = {{\.Z}enkiewicz, Marian and Richert, J{\'o}zef and Rytlewski, Piotr and Moraczewski, Krzysztof and Stepczy{\'n}ska, Magdalena and Karasiewicz, Tomasz}, - year = {2009}, - month = jun, - journal = {Polymer Testing}, - volume = {28}, - number = {4}, - pages = {412--418}, - issn = {01429418}, - doi = {10.1016/j.polymertesting.2009.01.012}, - urldate = {2014-07-02}, - file = {/Users/fabio/Zotero/storage/SINC3T7I/Characterisation of multi-extruded poly(lactic acid).pdf} -} - -@article{Zhai2014, - title = {Additive {{Manufacturing}}: {{Making Imagination}} the {{Major Limitation}}}, - author = {Zhai, Yuwei and a. Lados, Diana and LaGoy, Jane L.}, - year = {2014}, - month = may, - journal = {JOM}, - volume = {66}, - number = {5}, - pages = {808--816}, - issn = {1047-4838}, - doi = {10.1007/s11837-014-0886-2}, - urldate = {2014-05-29}, - file = {/Users/fabio/Zotero/storage/JZBUUPSU/Zhai, Lados, LaGoy - 2014 - Additive Manufacturing Making Imagination the Major Limitation.pdf} -} - -@article{Zhang2008, - title = {A Parametric Study of Part Distortions in Fused Deposition Modelling Using Three-Dimensional Finite Element Analysis}, - author = {Zhang, Y and Chou, K}, - year = {2008}, - month = aug, - journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, - volume = {222}, - number = {8}, - pages = {959--968}, - issn = {0954-4054}, - doi = {10.1243/09544054JEM990}, - urldate = {2013-03-24}, - keywords = {fused deposition modelling,numerical simulation,parametric study,part distor-}, - file = {/Users/fabio/Zotero/storage/887MN5VA/A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis.pdf} -} - -@article{Zhang2013, - title = {Open-Source {{3D-printable}} Optics Equipment.}, - author = {Zhang, Chenlong and Anzalone, Nicholas C and Faria, Rodrigo P and Pearce, Joshua M}, - year = {2013}, - month = jan, - journal = {PloS one}, - volume = {8}, - number = {3}, - pages = {e59840}, - issn = {1932-6203}, - doi = {10.1371/journal.pone.0059840}, - urldate = {2013-12-02}, - abstract = {Just as the power of the open-source design paradigm has driven down the cost of software to the point that it is accessible to most people, the rise of open-source hardware is poised to drive down the cost of doing experimental science to expand access to everyone. To assist in this aim, this paper introduces a library of open-source 3-D-printable optics components. This library operates as a flexible, low-cost public-domain tool set for developing both research and teaching optics hardware. First, the use of parametric open-source designs using an open-source computer aided design package is described to customize the optics hardware for any application. Second, details are provided on the use of open-source 3-D printers (additive layer manufacturing) to fabricate the primary mechanical components, which are then combined to construct complex optics-related devices. Third, the use of the open-source electronics prototyping platform are illustrated as control for optical experimental apparatuses. This study demonstrates an open-source optical library, which significantly reduces the costs associated with much optical equipment, while also enabling relatively easily adapted customizable designs. The cost reductions in general are over 97\%, with some components representing only 1\% of the current commercial investment for optical products of similar function. The results of this study make its clear that this method of scientific hardware development enables a much broader audience to participate in optical experimentation both as research and teaching platforms than previous proprietary methods.}, - pmid = {23544104}, - keywords = {Computer-Aided Design,Computer-Aided Design: economics,Computer-Aided Design: instrumentation,Costs and Cost Analysis,Magnetics,Optics and Photonics,Optics and Photonics: economics,Optics and Photonics: instrumentation,Printing,Printing: economics,Printing: instrumentation,Thermodynamics}, - file = {/Users/fabio/Zotero/storage/G2KGF2V9/Open-source 3D-printable optics equipment.pdf} -} - -@article{Zhang2015, - title = {Biomimetic Staggered Composites with Highly Enhanced Energy Dissipation: {{Modeling}}, {{3D}} Printing, and Testing}, - author = {Zhang, Pu and Heyne, Mary A. and To, Albert C.}, - year = {2015}, - journal = {Journal of the Mechanics and Physics of Solids}, - volume = {83}, - eprint = {1502.04568}, - pages = {285--300}, - publisher = {{Elsevier}}, - issn = {00225096}, - doi = {10.1016/j.jmps.2015.06.015}, - abstract = {We investigate the damping enhancement in a class of biomimetic staggered composites via a combination of design, modeling, and experiment. In total, three kinds of staggered composites are designed by mimicking the structure of bone and nacre. These composite designs are realized by 3D printing a rigid plastic and a viscous elastomer simultaneously. Greatly-enhanced energy dissipation in the designed composites is observed from both the experimental results and theoretical prediction. The designed polymer composites have loss modulus up to ???500 MPa, higher than most of the existing polymers. In addition, their specific loss modulus (up to 0.43 km\textsuperscript{2}/s\textsuperscript{2}) is among the highest of damping materials. The damping enhancement is attributed to the large shear deformation of the viscous soft matrix and the large strengthening effect from the rigid inclusion phase.}, - archiveprefix = {arxiv}, - isbn = {0022-5096}, - keywords = {Damping,Energy dissipation,Staggered composites} -} - -@article{Zhang2016, - title = {Overview of {{3D}} Printing Technologies for Reverse Engineering Product Design}, - author = {Zhang, Jianchao and Yu, Zhihong}, - year = {2016}, - month = mar, - journal = {Automatic Control and Computer Sciences}, - volume = {50}, - number = {2}, - pages = {91--97}, - issn = {0146-4116}, - doi = {10.3103/S0146411616020073}, - abstract = {With the rapid development of computer and information automatics, advanced manufacturing technologies (such as numerical control technology and computer-aided manufacturing) have been invented and matured. In the face of fierce competition in the international market of 21st century, high-tech application becomes one of the main battle fields. In recent years, reverse engineering technology has developed rapidly, through which the digital computer-aided design (CAD) models of products can be obtained rapidly and accurately; in association with optimization design, computer aided design and finite element analysis, reverse engineering technology significantly improves the development efficiency of new products. As one of the representative technologies of the third industrial revolution, three-dimensional (3D) printing technology is adopted in reverse engineering to realize rapid manufacturing of products in a lot of fields; in addition, 3D printing is gradually penetrating into each link of product design, attracting more and more attention from industrial and investment communities. \© 2016, Allerton Press, Inc.}, - keywords = {10,3103,3d printing technology,doi,innovative design of products,reverse engineering,s0146411616020073}, - file = {/Users/fabio/Zotero/storage/SU87VVP7/Overview of 3D printing technologies for reverse engineering product design.pdf} -} - -@article{Zhang2018, - title = {Reprocessable Thermosets for Sustainable Three-Dimensional Printing}, - author = {Zhang, Biao and Kowsari, Kavin and Serjouei, Ahmad and Dunn, Martin L. and Ge, Qi}, - year = {2018}, - month = dec, - journal = {Nature Communications}, - volume = {9}, - number = {1}, - pages = {1831}, - issn = {2041-1723}, - doi = {10.1038/s41467-018-04292-8}, - abstract = {Among all three-dimensional (3D) printing materials, thermosetting photopolymers claim almost half of the market, and have been widely used in various fields owing to their superior mechanical stability at high temperatures, excellent chemical resistance as well as good compatibility with high-resolution 3D printing technologies. However, once these thermosetting photopolymers form 3D parts through photopolymerization, the covalent networks are permanent and cannot be reprocessed, i.e., reshaped, repaired, or recycled. Here, we report a two-step polymerization strategy to develop 3D printing reprocessable thermosets (3DPRTs) that allow users to reform a printed 3D structure into a new arbitrary shape, repair a broken part by simply 3D printing new material on the damaged site, and recycle unwanted printed parts so the material can be reused for other applications. These 3DPRTs provide a practical solution to address environmental challenges associated with the rapid increase in consumption of 3D printing materials.}, - file = {/Users/fabio/Zotero/storage/DGSGEPMC/reprocessable thermosets for sustainable three-dimensional printing.pdf} -} - -@article{Zhang2019, - title = {Forecasting Technical Emergence: {{An}} Introduction}, - author = {Zhang, Yi and Porter, Alan and Chiavetta, Denise and Newman, Nils C. and Guo, Ying}, - year = {2019}, - month = jan, - journal = {Technological Forecasting and Social Change}, - issn = {00401625}, - doi = {10.1016/j.techfore.2018.12.025} -} - -@article{Zhang2019a, - title = {Modeling and Analysis of the On-Demand Spare Parts Supply Using Additive Manufacturing}, - author = {Zhang, Yuan and Jedeck, Stefan and Yang, Li and Bai, Lihui}, - year = {2019}, - month = apr, - journal = {Rapid Prototyping Journal}, - volume = {25}, - number = {3}, - pages = {473--487}, - issn = {1355-2546}, - doi = {10.1108/RPJ-01-2018-0027}, - abstract = {Purpose \textendash{} Despite the widespread expectation that additive manufacturing (AM) will become a disruptive technology to transform the spare parts supply chain, very limited research has been devoted to the quantitative modeling and analysis on how AM could fulfill the on-demand spare parts supply. On the other hand, the choice of using AM as a spare parts supply strategy over traditional inventory is a rising decision faced by manufacturers and requires quantitative analysis for their AM-or-stock decisions. The purpose of this paper is to develop a quantitative performance model for a generic powder bed fusion AM system in a spare parts supply chain, thus providing insights into this less-explored area in the literature. Design/methodology/approach \textendash{} In this study, analysis based on a discrete event simulation was carried out for the use of AM in replacement of traditional warehouse inventory for an on-demand spare parts supply system. Generic powder bed fusion AM system was used in the model, and the same modeling approach could be applied to other types of AM processes. Using this model, the impact of both spare parts demand characteristics (e.g. part size attributes, demand rates) and the AM operations characteristics (e.g. machine size and postpone strategy) on the performance of using AM to supply spare parts was studied. Findings \textendash{} The simulation results show that in many cases the AM operation is not as cost competitive compared to the traditional warehouse- based spare parts supply operation, and that the spare parts size characteristics could significantly affect the overall performance of the AM operations. For some scenarios of the arrival process of spare parts demand, the use of the batched AM production could potentially result in significant delay in parts delivery, which necessitates further investigations of production optimization strategies. Originality/value \textendash{} The findings demonstrate that the proposed simulation tool can not only provide insights on the performance characteristics of using AM in the spare parts supply chain, especially in comparison to the traditional warehousing system, but also can be used toward decision making for both the AM manufacturers and the spare parts service providers.}, - keywords = {Advanced manufacturing technologies,Production processes,Rapid prototyping,Simulation,Supply chain}, - file = {/Users/fabio/Zotero/storage/3VSTJLBT/Modeling and analysis of the on-demand spare parts supply using additive manufacturing.pdf} -} - -@article{Zhang2019b, - title = {Identification of Product's Design Characteristics for Remanufacturing Using Failure Modes Feedback and Quality Function Deployment}, - author = {Zhang, Xiufen and Zhang, Shuyou and Zhang, Lichun and Xue, Junfang and Sa, Rina and Liu, Hai}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {117967}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117967} -} - -@article{Zhang2019c, - title = {{{3D}} Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise in Situ Self-Healing Properties}, - author = {Zhang, Yue and Yin, Xiang Yu and Zheng, Mingyue and Moorlag, Carolyn and Yang, Jun and Wang, Zhong Lin}, - year = {2019}, - journal = {Journal of Materials Chemistry A}, - volume = {7}, - number = {12}, - pages = {6972--6984}, - publisher = {{Royal Society of Chemistry}}, - issn = {20507496}, - doi = {10.1039/c8ta12428k}, - abstract = {3D printable thermoreversible polyurethanes (PDAPUs) are synthesized, which facilitate the manufacturing of smart devices with 3D structures. The cross-linking of aniline trimer in PDAPUs plays a critical role in realizing light controllable precise selfhealing and targeted shape memory. The formation of durable 3D parts composed of functional polymers for intelligent devices such as robots is highly desirable. Here, we demonstrate the synthesis, 3D printing and applications of thermoreversible shape-memory polyurethanes (PDAPUs), which show good stability, ease of 3D printability, and excellent light control for precise self-healing and targeted shape memory (SM). As a breakthrough in the making of traditional smart devices, the combination of the 3D printing technology with SM characteristics facilitates the manufacturing of smart devices particularly with complex 3D structures, which enables arbitrary transformation between permanent and temporary 3D shapes. The reactive cross-linking of aniline trimer (AT) in PDAPU networks endows the polymers with improved mechanical properties and an efficient photothermal effect. Taking advantage of the spatial characteristics of 3D structures and the ease of control of light, the PDAPUs can achieve targeted shape restoration. Furthermore, the NIR laser can also be used to precisely trigger in situ self-healing of the PDAPUs without damaging their original 3D structures, which is particularly important for extending the lifespan of functional parts with specific structures. Moreover, the PDAPUs are recyclable and can be reprinted. The present research shows the promising potential of PDAPUs for next-generation intelligent devices.}, - file = {/Users/fabio/Zotero/storage/X9VUMLXF/3D printing of thermoreversible polyurethanes with targeted shape memory and precise in situ self-healing properties.pdf} -} - -@article{Zhang2019d, - title = {Evaluation of the Ecological Civilization Index of {{China}} Based on the Double Benchmark Progressive Method}, - author = {Zhang, Linbo and Yang, Jiao and Li, Daiqing and Liu, Haijiang and Xie, Yuxi and Song, Ting and Luo, Shanghua}, - year = {2019}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {222}, - pages = {511--519}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.173}, - urldate = {2020-05-21}, - abstract = {Since 2013, the Chinese government has issued a set of action plans catered toward the ecological civilization construction. To quantify and evaluate the ecological civilization development, this study has introduced the ecological civilization index of China (ECI), using different standardization methods (extreme standardization, single-benchmark progressive standardization, and double benchmark progressive standardization), to evaluate ecological civilization development on city-level (337 cities) of China. The issues of China's ecological civilization construction were analyzed. The evaluation results suggest that in the double benchmark progressive method, every evaluation score has its practical meaning and is therefore suitable for policy making. This study obtained an average ECI score of 61.16, for 337 cities. This is China's overall ECI score, which is classified as C-grade. Only 4.75\% of cities' green environment (GE) score obtained A-grade, while 53.41\% of cities' GE scored below the passing level, suggesting that the quality of the ecology and environment is neglected in the development of China eco-civilization. This study provides valuable knowledge for both the ecological and environment management and eco-civilization construction.}, - keywords = {Double-benchmark progressive method,Eco-civilization,Eco-civilization development evaluation,Eco-civilization index of China} -} - -@article{Zhang2019e, - title = {Effects of Proactive Environmental Strategy on Environmental Performance: {{Mediation}} and Moderation Analyses}, - author = {Zhang, Shanshan and Wang, Zhiqiang and Zhao, Xiande}, - year = {2019}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {235}, - pages = {1438--1449}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.06.220}, - urldate = {2020-05-21}, - abstract = {Contradictory findings on the relationship between proactive environmental strategy and performance are reported in the existing literature. The way that proactive environmental strategy is defined, the omission of crucial mediating variables and the misfit between strategy and business structures may help explain these conflicting findings. Drawing upon the logic of strategy-action-performance, this study tests the effects of two implementation variables of proactive environmental strategy\textemdash green human resource management (GHRM) and environmental legitimacy (EL)\textemdash on environmental performance as well as the mediating roles played by the implementation of green operational practices (GOP). Further, based on contingency theory, this study proposes that the impacts of GHRM and EL on the implementation of GOP might be moderated by operational barriers (OB) and managerial barriers (MB). The proposed hypotheses are empirically tested using a dataset of 260 sample plants in 11 countries/regions (Finland, Sweden, Germany, Taiwan, Israel, Mainland China, Spain, Brazil, Italy, South Korea and Japan). The results show that the effect of GHRM on environmental performance is fully mediated by the implementation of GOP (the path coefficient b for the direct link between GHRM and environmental performance changes from 0.436, p {$<$} 0.001 to 0.180, p {$>$} 0.1). EL has no statistically significant direct or indirect effects on environmental performance (direct effect: b = -0.08, p {$>$} 0.1, indirect effect: b = 0.083, p {$>$} 0.1) but has a marginally significant effect on the implementation of GOP (b = 0.218, p {$<$} 0.1). The results also indicate that OB reduce the effectiveness of EL in facilitating the implementation of GOP (b = -0.103, p {$<$} 0.1), and MB reduce the effectiveness of GHRM in supporting the implementation of GOP (b = -0.11, p {$<$} 0.1).}, - keywords = {Barriers,Environmental legitimacy,Environmental performance,Green human resource management,Green operational practices,Proactive environmental strategy} -} - -@article{Zhang2019f, - title = {General Reference Model and Overall Frameworks for Green Manufacturing}, - author = {Zhang, Xianyu and Ming, Xinguo and Liu, Zhiwen and Qu, Yuanju and Yin, Dao}, - year = {2019}, - month = nov, - journal = {Journal of Cleaner Production}, - volume = {237}, - pages = {117757}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117757}, - urldate = {2020-05-15}, - abstract = {With the increasingly serious problems of environmental impact and excessive consumption of production resources brought about by industrial development, enterprises pay more and more attention to the green manufacturing of industry. In the existing green manufacturing standard system, it clearly covers all elements, layers, activities and functions of green manufacturing. However, it does not refine the specific contents of green manufacturing model and framework in different industrial areas. The research in this paper can fill this gap. This paper aims to provide a general model and overall framework of green manufacturing for industrial enterprises. In this way, according to the needs and conditions, enterprises can construct and formulate a clear plan for the implementation of green manufacturing that conforms to their actual situation of enterprises. By these, it can ultimately enhance the improvement ratio of comprehensive green rate for enterprises. In this paper, a general reference model for green manufacturing based on IIPG (Industrial Implementation for Product life cycle based on Green index system) modular is proposed. Then, in the form of a case, three enterprises in three key industrial fields are selected to customize and validate the model. Integrating with intelligence technologies, such as artificial intelligence and industrial cloud, this model can be improved by the higher data processing efficiency and computing speed in green index systems, which is the follow-up work.}, - keywords = {Green design,Green enterprise,Green index,Green manufacturing,Green production,Green supply chain} -} - -@article{Zhang2019g, - title = {Bibliometric Analysis of Highly Cited Articles on Ecosystem Services}, - author = {Zhang, Xinmin and Estoque, Ronald C. and Xie, Hualin and Murayama, Yuji and Ranagalage, Manjula}, - editor = {Bianchi, Carlo Nike}, - year = {2019}, - month = feb, - journal = {PLoS ONE}, - volume = {14}, - number = {2}, - pages = {e0210707}, - publisher = {{Public Library of Science}}, - issn = {19326203}, - doi = {10.1371/journal.pone.0210707}, - urldate = {2021-04-23}, - abstract = {This paper presents global research trends involving highly cited articles on ecosystem services from 1981 to 2017 based on a bibliometric analysis of such articles from the SCI-E and SSCI databases of the Web of Science. The analysis revealed that there were 132 highly cited articles, most of which were published between 2005 and 2014. Based on author keywords, the term ecosystem services was strongly linked to biodiversity. The top three journals in terms of total number of highly cited articles published were Ecological Economics, PNAS, and Ecological Indicators. Despite ranking sixth overall, Science ranked first in both impact factor and total citations per article. The US, UK, Netherlands, Spain, and Sweden were the top five most productive and cooperative countries in the world based on total number of highly cited articles and co-authorship network, respectively. The US was highly connected to Canada, the Netherlands, China and the UK. Stockholm University and Stanford University were the most productive institutions in Europe and North America, respectively. Stanford University is associated with many scholars in the field of ecosystem services research because of the InVEST model. Robert Costanza was the most prolific and highly cited author, the latter being largely due to the first valuation of the world's ecosystem services and natural capital, he and his co-authors published in 1997 in Nature. Terrestrial, urban, and forest ecosystems were the top types of ecosystems assessed. Regulating and provisioning services were the major ecosystem services studied. Quantitative and qualitative assessments were the main research focus. Most of these highly cited studies on ecosystem services are done on areas geographically located in North America and Europe.}, - pmid = {30742632}, - keywords = {Bibliometrics,Biodiversity,Citation analysis,Ecological economics,Ecosystems,United States,Urban ecosystems,Wetland ecosystems}, - file = {/Users/fabio/Zotero/storage/RM4BPWWG/full-text.pdf} -} - -@article{Zhang2020, - title = {Conscientiousness and Smartphone Recycling Intention: {{The}} Moderating Effect of Risk Perception}, - author = {Zhang, Yue and Wu, Song and Rasheed, Muhammad Imran}, - year = {2020}, - month = jan, - journal = {Waste Management}, - volume = {101}, - pages = {116--125}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2019.09.040} -} - -@article{Zhang2020a, - title = {Have Countries Moved towards Sustainable Development or Not? {{Definition}}, Criteria, Indicators and Empirical Analysis}, - author = {Zhang, Shuai and Zhu, Dajian}, - year = {2020}, - month = sep, - journal = {Journal of Cleaner Production}, - volume = {267}, - pages = {121929}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121929}, - urldate = {2020-05-27}, - keywords = {Four criteria,Indictors,Moving towards sustainable development,New definition}, - file = {/Users/fabio/Zotero/storage/D6MM48ZK/Zhang, Zhu - 2020 - Have countries moved towards sustainable development or not Definition, criteria, indicators and empirical analysis.pdf} -} - -@article{zhangComprehensiveReviewSeparation2023, - title = {A Comprehensive Review of Separation Technologies for Waste Plastics in Urban Mine}, - author = {Zhang, Yingshuang and Wang, Qiang and Yalikun, Nuerbiya and Wang, Hui and Wang, Chongqing and Jiang, Hongru}, - year = {2023}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {197}, - pages = {107087}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.107087}, - urldate = {2023-07-03}, - abstract = {Plastic recycling has an obstacle from heterogeneous composition of plastic mixtures, which can be rectified by separation based on their different chemical and physical properties. Thus, it is essential to conduct a comprehensive review about separation technologies and developing trends of waste plastics. This study performed a bibliometric analysis of 2122 literatures through keywords searching based on Web of Science Core Collection database from 2000 to 2023. Then, we organized a review by selecting 144 literatures of plastic-containing mixtures and separation technologies excluding microplastics removal and plastics pyrolysis. This study summarized the liberation of waste plastics from metal, paper, pigment, plasticizer, oil contamination, and cross-linked silicone in Tetra Pak carton packaging, pharmaceutical blisters, electric cables, and printed circuit boards. Selective dissolution, hardness sorting, froth flotation, density separation, tribo-electrostatic treatment, and indirect sorting (based on spectroscopic technologies) were effective technologies to separate plastics from each other. The liberation is a premise to the subsequent separation. We stated characteristic factors of separation processes and evaluated the pros and cons of separation technologies. Separation routes of waste plastics could be divided in plastic-driven processes and commodity-driven processes. From commodity perspectives, separation after classification are endowed with robust operability (reproducibility) by avoiding uncontrollable interferences.}, - langid = {english}, - keywords = {Commodity-driven process,Plastic liberation,Plastic recycling,Plastic separation}, - file = {/Users/fabio/Zotero/storage/92XWTFAN/S0921344923002239.html} -} - -@article{zhangCouplingSystemCarbon2021, - title = {Coupling System of Carbon Emission and Social Economy: {{A}} Review}, - author = {Zhang, Hong and Jin, Gui and Zhang, Zhengyu}, - year = {2021}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {167}, - pages = {120730}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120730}, - urldate = {2021-03-14} -} - -@article{zhangDepolymerizationPolyestersBinuclear2023, - title = {Depolymerization of Polyesters by a Binuclear Catalyst for Plastic Recycling}, - author = {Zhang, Shengbo and Hu, Qikun and Zhang, Yu-Xiao and Guo, Haoyue and Wu, Yanfen and Sun, Mingze and Zhu, Xingsong and Zhang, Jiangang and Gong, Shuyan and Liu, Ping and Niu, Zhiqiang}, - year = {2023}, - month = may, - journal = {Nature Sustainability}, - pages = {1--9}, - publisher = {{Nature Publishing Group}}, - issn = {2398-9629}, - doi = {10.1038/s41893-023-01118-4}, - urldate = {2023-05-11}, - abstract = {Plastics play an essential role in modern society; however, the relentless growth of their production is threatening both human health and ecosystems. As a result, there are intensive efforts in developing recycling technologies to repurpose waste plastics into the building blocks for valuable materials. Here we show a binuclear complex that can catalyse the degradation of poly(ethylene terephthalate) (PET)\textemdash the most widely used polyester globally\textemdash and a wide spectrum of other plastics including polylactic acid, polybutylene adipate terephthalate, polycaprolactone, polyurethane and Nylon 66. Inspired by hydrolases, the group of enzymes that catalyse bond cleavages with water, the present catalyst design features biomimetic Zn-Zn sites that activate the plastic, stabilize the key intermediate and enable intramolecular hydrolysis. This synthetic catalyst delivers an activity of 36\,mgPET\,d-1\,gcatal-1 toward PET depolymerization at pH 8 and 40\,\textdegree C and an activity of 577\,gPET\,d-1\,gcatal-1 at pH 13 and 90\,\textdegree C for scalable PET recycling. We further demonstrate a closed-loop production of bottle-grade PET. This work presents a practical and viable solution for the sustainable management of plastics waste.}, - copyright = {2023 The Author(s), under exclusive licence to Springer Nature Limited}, - langid = {english}, - keywords = {Heterogeneous catalysis,Pollution remediation}, - file = {/Users/fabio/Zotero/storage/M272JALR/Zhang et al. - 2023 - Depolymerization of polyesters by a binuclear cata.pdf} -} - -@article{zhangInformalFormalOpen2021, - title = {Informal and Formal Open Activities: {{Innovation}} Protection Methods as Antecedents and Innovation Outputs as Consequences}, - author = {Zhang, Jingjing and Groen, Aard}, - year = {2021}, - month = jun, - journal = {Technological Forecasting and Social Change}, - volume = {167}, - pages = {120696}, - publisher = {{North-Holland}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2021.120696}, - urldate = {2021-03-08} -} - -@article{zhangLifeCycleAssessment2023, - title = {Life Cycle Assessment of Material Footprint in Recycling: {{A}} Case of Concrete Recycling}, - shorttitle = {Life Cycle Assessment of Material Footprint in Recycling}, - author = {Zhang, Chunbo and Hu, Mingming and {van der Meide}, Marc and Di Maio, Francesco and Yang, Xining and Gao, Xiaofeng and Li, Kai and Zhao, Hailong and Li, Chen}, - year = {2023}, - month = jan, - journal = {Waste Management}, - volume = {155}, - pages = {311--319}, - issn = {0956-053X}, - doi = {10.1016/j.wasman.2022.10.035}, - urldate = {2022-12-12}, - abstract = {Meeting the current demand for concrete requires not only mining tons of gravel and sand, but also burning large amounts of fossil fuel resources in cement kilning. Consequently, concrete recycling is crucial to achieving a material-efficient society, especially with the application of various categories of concrete and the goal of phasing out fossil fuels. A comparative life cycle assessment (LCA) is used to assess the engineering material footprint (EMF) and the fossil fuel material footprint (FMF) in closed-loop recycling of three types of concrete: siliceous concrete, limestone concrete, and lightweight aggregate concrete. This study aims to investigate the impact of (i) concrete categories, (ii) methods to model recycling, and (iii) using renewable energy sources on the material footprint in concrete recycling. The results highlight that the concrete recycling system can reduce 99\% of the EMF and 66\textendash 93\% of the FMF compared with the baseline system, in which concrete waste is landfilled. All three recycling modeling approaches indicate that concrete recycling can considerably reduce EMF and FMF compared with the baseline system, primarily resulting from the displacement of virgin raw materials. Using alternative diesels is more sensitive than adopting renewable electricity in reduction of the FMF in concrete recycling. Replacing diesel with electrolysis- and coal-based synthetic diesel for concrete recycling could even increase the FMF, while using biodiesel made from rapeseed and wood-based synthetic diesel can reduce 47\textendash 51\% and 84\textendash 89\% of the FMF, respectively, compared to the virgin diesel-based recycling system. Finally, we discussed the multifunctionality and rebound effects of recycling, and double-counting risk in material and energy accounting.}, - langid = {english}, - keywords = {Concrete,Construction and demolition waste,Life cycle assessment,Material footprint,Recycling,Renewable energy}, - file = {/Users/fabio/Zotero/storage/GLKXV4H8/Zhang et al_2023_Life cycle assessment of material footprint in recycling.pdf;/Users/fabio/Zotero/storage/9IBD8NIX/S0956053X22005232.html} -} - -@article{zhangMicroplasticsPollutionSoil2022, - title = {Microplastics Pollution in Soil Increases Dramatically with Long-Term Application of Organic Composts in a Wheat\textendash Maize Rotation}, - author = {Zhang, Jiajia and Wang, Xuexia and Xue, Wentao and Xu, Li and Ding, Wencheng and Zhao, Meng and Liu, Shanjiang and Zou, Guoyuan and Chen, Yanhua}, - year = {2022}, - month = jul, - journal = {Journal of Cleaner Production}, - volume = {356}, - pages = {131889}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2022.131889}, - urldate = {2022-05-23} -} - -@article{zhangMultilabelWasteDetection2022, - title = {A Multi-Label Waste Detection Model Based on Transfer Learning}, - author = {Zhang, Qiang and Yang, Qifan and Zhang, Xujuan and Wei, Wei and Bao, Qiang and Su, Jinqi and Liu, Xueyan}, - year = {2022}, - month = jun, - journal = {Resources, Conservation and Recycling}, - volume = {181}, - pages = {106235}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2022.106235}, - urldate = {2022-03-13} -} - -@article{zhangNudgingPromoteHousehold2020, - title = {Nudging to Promote Household Waste Source Separation: {{Mechanisms}} and Spillover Effects}, - author = {Zhang, Zhijian and Wang, Xueyuan}, - year = {2020}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {162}, - pages = {105054}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2020.105054}, - urldate = {2020-07-21} -} - -@article{zhangRecyclableWasteImage2021, - title = {Recyclable Waste Image Recognition Based on Deep Learning}, - author = {Zhang, Qiang and Zhang, Xujuan and Mu, Xiaojun and Wang, Zhihe and Tian, Ran and Wang, Xiangwen and Liu, Xueyan}, - year = {2021}, - month = aug, - journal = {Resources, Conservation and Recycling}, - volume = {171}, - pages = {105636}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2021.105636}, - urldate = {2021-05-03} -} - -@article{zhangResilientManufacturingSystem2011, - title = {Toward a Resilient Manufacturing System}, - author = {Zhang, W. J. and {van Luttervelt}, C. A.}, - year = {2011}, - month = jan, - journal = {CIRP Annals}, - volume = {60}, - number = {1}, - pages = {469--472}, - issn = {0007-8506}, - doi = {10.1016/j.cirp.2011.03.041}, - urldate = {2022-10-05}, - abstract = {Resilience often refers to a property of social and ecological systems. Recently, resilience is applied to engineered systems, referring to their capability to recover their functions after partial damage to lead to successes from failures. In this paper, the concept of engineering resilience is revisited and clarified. A new definition of the general production system is proposed, upon which the concept of the resilient manufacture system (RMS) is proposed. Furthermore, four guidelines for design and management of the RMS are proposed. Examples are discussed to illustrate the applications of these guidelines toward the RMS.}, - langid = {english}, - keywords = {Design,Management,Resilience}, - file = {/Users/fabio/Zotero/storage/RV8DSU6W/S0007850611000424.html} -} - -@article{zhangRobotassistedConformalAdditive2023, - title = {Robot-Assisted Conformal Additive Manufacturing for Continuous Fibre-Reinforced Grid-Stiffened Shell Structures}, - author = {Zhang, Guoquan and Wang, Yaohui and Chen, Ziwen and Xu, Xuguang and Dong, Ke and Xiong, Yi}, - year = {2023}, - month = dec, - journal = {Virtual and Physical Prototyping}, - volume = {18}, - number = {1}, - pages = {e2203695}, - publisher = {{Taylor \& Francis}}, - issn = {1745-2759}, - doi = {10.1080/17452759.2023.2203695}, - urldate = {2023-05-11}, - abstract = {The advents in continuous fibre-reinforced polymer additive manufacturing (CFRP-AM) present unprecedented opportunities for the rapid development of next-generation high-performance composites with selectively and spatially distributed reinforcement. However, the widely adopted 3-degree-of-freedom motion configuration in current CFRP-AM systems hinders the exploration of composite structures with non-planar fibre layouts. This work presents a novel conformal CFRP-AM system to fabricate grid-stiffened shell structures leveraging its multi-DoF motion to pattern spatial features. The system integrates a 6-axis robot with an optimally designed co-extrusion module and operates through a design-to-manufacturing workflow. The proposed workflow includes three steps: system calibration, conformal toolpath generation, and process implementation. The conformal toolpath generation is a surface-mapping-based method that allows a simultaneous exploration of various geometric designs and their toolpaths. Experimental comparisons were made between parts fabricated by different processes, i.e., planar and conformal based, with different toolpaths, i.e., shells filled with zigzag and arc-offset patterns, and with various geometric designs, i.e., stiffener ribs with different crossline angles. The results manifest that the proposed system can significantly improve the compression strength and stiffness of grid-stiffened shell structures. Meanwhile, the additional design freedom on process and structure opens up a new possibility to customise their mechanical performance.}, - keywords = {continuous fibre-reinforced polymer additive manufacturing,grid-stiffened shell structure,Robotic system,surface conformal toolpath}, - file = {/Users/fabio/Zotero/storage/EJZNWJE8/Zhang et al. - 2023 - Robot-assisted conformal additive manufacturing fo.pdf} -} - -@article{zhangSingleStreamDual2020, - title = {Single Stream or Dual Stream? {{A}} Game-Theoretic Approach to the Sustainable Evolution in Waste Recycling Systems}, - author = {Zhang, Zichen and Luo, Xinggang and Liu, Chenghao and Zhao, Liqiang and Jing, Hao}, - year = {2020}, - month = apr, - journal = {Journal of Cleaner Production}, - volume = {269}, - pages = {121847}, - publisher = {{Elsevier BV}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.121847}, - urldate = {2020-06-11} -} - -@article{zhangSubsidyNeededWaste2022, - title = {Is Subsidy Needed for Waste {{PV}} Modules Recycling in {{China}}? {{A}} System Dynamics Simulation}, - author = {Zhang, Libo and Chang, Songge and Wang, Qunwei and Zhou, Dequn}, - year = {2022}, - month = may, - journal = {Sustainable Production and Consumption}, - volume = {31}, - pages = {152--164}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.02.005}, - urldate = {2022-03-08}, - abstract = {The growing photovoltaic (PV) generation installation accelerates the increase of waste PV modules in China, and the recycling of used modules is inevitable and urgent. However, the economic feasibility of recycling is uncertain due to factors like policy, technology, and market. In this regard, the aim of this paper is to investigate the impact of a subsidy policy on the comprehensive economic feasibility of waste module recycling, and to identify a reasonable subsidy scheme. In particular, we developed the system dynamics model for PV waste modules recycling that can simulate the evolution of the recycling ROI (return on investment), the recovery rate and the subsidy cost for a baseline and reasonable scenarios with different subsidies. We also considered cost factors, for example, learning rates for recycling technology, buyback prices and recovery transportation distances, etc. The results show that, in the early stages of recycling (before 2026), the comprehensive cost-economic feasibility of recycling is low without subsidies, and therefore subsidy policies are needed to support and guide recycling. However, we also need to set reasonable subsidy standards and exit mechanisms for different recycling stages considering the changes of recycling technology costs, recovery rates and subsidy costs, etc.} -} - -@article{zhangVisualizingRecyclingPromoting2021, - title = {Visualizing Recycling: {{Promoting}} Recycling through Mental Simulation}, - author = {Zhang, Jin and Zhao, Lijun and Hu, Saiquan}, - year = {2021}, - month = nov, - journal = {Resources, Conservation and Recycling}, - volume = {174}, - pages = {105783}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.105783}, - urldate = {2021-08-20}, - abstract = {Mental simulation is a potentially effective intervention method for pursuing goals and enhancing task performance. Little is known, however, about the application of this method for enhancing pro-environmental behavior. We examined whether asking individuals to mentally simulate themselves recycling impacted their intention to recycle and how the imagery perspective (i.e., actor's vs. observer's perspective) and thought focus (i.e., process vs. outcome focus) can enhance the potential effectiveness of mental simulation. Across three studies, we found support for the efficacy of recycling simulation in enhancing individuals' recycling behavior and intentions to recycle. This effect partly comes from warm-glow feelings about recycling. Furthermore, when individuals focus on the outcomes of recycling, adopting an observer's perspective leads to greater pro-recycling intentions. In contrast, when individuals focus on the processes of recycling, adopting an actor's perspective enhances pro-recycling intentions. The mechanisms that underlie the interaction effect, along with theoretical and practical implications, are examined and discussed.}, - keywords = {Focus,Imagery perspective,Mental simulation,Recycling} -} - -@article{zhangWhoShouldLead2021, - title = {Who Should Lead Raw Materials Collection Considering Regulatory Pressure and Technological Innovation？}, - author = {Zhang, Cuihua and Lyu, Ruxia and Li, Zhitang and MacMillen, Simeon J.}, - year = {2021}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {298}, - pages = {126762}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2021.126762}, - urldate = {2021-04-29}, - abstract = {Government regulations have increased pressure on emissions-producing manufacturers. Due to regulatory pressure, manufacturers begin to invest in green technologies to reduce emissions, and collect end-of-life products as recycled raw materials. This paper analyzes who should lead raw materials collection, the manufacturer, the retailer or the third-party Internet recycling platform, from the perspectives of environmental benefit, economic benefit and social welfare. Among three collection models, the third-party incorporates technological innovation to filter and classify recycled products according to quality. Our results suggest, firstly, regulatory pressure serves as an effective emission-curbing measure in the forward logistics. Secondly, the effect of emission reduction investment under the third party-led collection is superior to that under the other two collection models. Thirdly, from the perspective of economic benefit, the optimal recycling channel for manufacturers is related to the fixed cost of establishing a recycling channel. From the perspectives of environmental benefit and social welfare, the third party-led collection is the optimal strategy.}, - keywords = {Closed-loop supply chain,Emission reduction,Raw materials collection,Regulatory pressure,Technological innovation} -} - -@article{Zhao2018, - title = {Close-Looped Recycling of Polylactic Acid Used in {{3D}} Printing: {{An}} Experimental Investigation and Life Cycle Assessment}, - author = {Zhao, Peng and Rao, Chengchen and Gu, Fu and Sharmin, Nusrat and Fu, Jianzhong}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {197}, - pages = {1046--1055}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2018.06.275}, - abstract = {The objective of this work is to investigate the potential of close-looped recycling of polylactic acid (PLA) that used in 3D printing, from the perspectives of material properties and environmental performance. A commercial grade of PLA was extruded into filament, then was subjected to fused deposition modelling (FDM) 3D printing process. The printed products were later shredded and re-extruded for repeating 3D printing cycle. Samples were taken from each repeating cycle, were characterised in terms of mechanical, rheological, molecular, thermal and morphological properties. In the experiment, the material can only be reprocessed for two 3D printing cycles, as the reprocessed material can no longer be further processing. Although little changes are observed in the mechanical properties, the viscosity measurements suggest that PLA deteriorates significantly due to the repeated FDM 3D printing cycles. The reduced viscosity values are compatible with the decrements in average molecular weights and thermal stability, the increments of carbonyl bonds, crystallinity and pinholes in the materials' surfaces. Virgin PLA was blended into the recycled material to improve the viscosities, which enables the blends 3D printable. The results of life cycle assessment approach show that the environmental burdens associated with close-looped recycling are lower than those of placing the 3D printed products in incineration or in landfill. Incineration might be another environmental alternative, due to the material embodies a relatively high calorific value; however, the material is not recuperated, thus incineration cannot satisfy the more stringent environmental legislations, in which recovery and reuse of materials are rigorously required.}, - isbn = {978-981-10-0471-1}, - keywords = {3D printing,Close-looped recycling,End-of-life option,Life cycle assessment,Polylactic acid,Viscosity}, - file = {/Users/fabio/Zotero/storage/AVTX2XR6/Close-looped recycling of polylactic acid used in 3D printing An experimental investigation and life cycle assessment.pdf} -} - -@article{Zhao2018a, - title = {Enhanced Mechanical Properties of Self-Polymerized Polydopamine-Coated Recycled {{PLA}} Filament Used in {{3D}} Printing}, - author = {Zhao, Xing Guan and Hwang, Kyung-Jun and Lee, Dongoh and Kim, Taemin and Kim, Namsu}, - year = {2018}, - month = may, - journal = {Applied Surface Science}, - volume = {441}, - pages = {381--387}, - publisher = {{Elsevier B.V.}}, - issn = {01694332}, - doi = {10.1016/j.apsusc.2018.01.257}, - urldate = {2021-01-15}, - abstract = {Dopamine readily adsorbs onto almost all kinds of surfaces and develops cohesive strength through self-polymerization; hence, aqueous solutions of dopamine can be used as adhesives. These properties were used to prevent the degradation in the mechanical properties of recycled PLA fabricated by 3D printer. The mechanical properties of 3D printed PLA play a critical role in determining its applications. To reduce the manufacturing cost as well as environmental pollutants, recycling of 3D printed materials has attracted many attentions. However, recycling of polymeric materials causes the degradation of the mechanical properties. Our study is aimed at advancing the current knowledge on the adhesion behavior of polydopamine coatings on PLA pellets used in 3D printing process. Polydopamine was synthesized by oxidative polymerization and used to coat PLA specimens. The adhesion behavior and mechanical properties of the 3D printed specimens were evaluated by tensile tests. It was found that the mechanical properties of recycled specimen with polydopamine coating have been improved. Microstructural and chemical characterization of the coated specimens was carried out using FE-SEM, FTIR, and XPS analyses.}, - keywords = {3D printer,Adhesion bonding,Filament recycling,Mechanical properties,Polydopamine,Polylactic acid (PLA)} -} - -@article{zhaoContentsMethodsKnowledge2021, - title = {The Contents and Methods of Knowledge Network from the Perspective of Bibliometrics}, - author = {Zhao, Rongying and Li, Danyang and Wei, Mingkun and Li, Xinlai}, - year = {2021}, - month = mar, - journal = {Technology Analysis \& Strategic Management}, - pages = {1--13}, - publisher = {{Routledge}}, - issn = {0953-7325}, - doi = {10.1080/09537325.2021.1894329}, - urldate = {2021-03-14}, - abstract = {Knowledge network is widely applied in fields, such as management science, library science, information science and pedagogy, to determine the cutting-edge and popular aspects in relevant fields. I...}, - keywords = {Bibliometrics,knowledge management,knowledge network,visualisation}, - file = {/Users/fabio/Zotero/storage/7NZNEKGB/full-text.pdf} -} - -@article{zhaoSustainabilityOrientationAdoption2020, - title = {Sustainability Orientation, the Adoption of {{3D}} Printing Technologies, and New Product Performance: {{A}} Cross-Institutional Study of {{American}} and {{Indian}} Firms}, - author = {Zhao, Mengli and Yang, Jianjun and Shu, Chengli and Liu, Jinxin}, - year = {2020}, - month = nov, - journal = {Technovation}, - pages = {102197}, - publisher = {{Elsevier Ltd}}, - issn = {01664972}, - doi = {10.1016/j.technovation.2020.102197}, - urldate = {2020-11-23}, - abstract = {Developing new products that can address the triple bottom line of sustainability poses one of the grand challenges in our time. This study is among the first to examine how the adoption of 3D printing (3DP) technologies mediates the impact of firms' sustainability orientation (SO) on new product performance. We use a mixed-methods design. First, we conduct qualitative interviews in the U.S. and India and find that firms adopt 3DP technologies in two stages: acquisition and application. We then conduct a quantitative study based on large-scale surveys in these two countries and the results show that SO has a stronger positive effect on the acquisition of 3DP technologies in U.S. firms than in Indian ones, but it has a stronger positive effect on the application of 3DP technologies in India than in the U.S. Moreover, the application of 3DP technologies partially mediates the effects of SO on new product performance in Indian firms but not in U.S. firms. This study enriches our understanding of how SO influences new product performance by distinguishing between stages in the adoption of 3DP technologies and shows that the impacts of SO on distinct stages in the adoption process differ between developing and developed countries.}, - keywords = {3D printing technologies,India,New product performance,Sustainability orientation,Technology adoption,The U.S.} -} - -@article{Zheng2020, - title = {From Digital to Sustainable: {{A}} Scientometric Review of Smart City Literature between 1990 and 2019}, - author = {Zheng, Chuanjun and Yuan, Jingfeng and Zhu, Lei and Zhang, Yajing and Shao, Qiuhu}, - year = {2020}, - month = jun, - journal = {Journal of Cleaner Production}, - volume = {258}, - pages = {120689}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.120689} -} - -@article{zhengEvolutionaryProcessHousehold2020, - title = {Evolutionary Process of Household Waste Separation Behavior Based on Social Networks}, - author = {Zheng, Junjun and Ma, Gang and Wei, Ju and Wei, Wendong and He, Yujie and Jiao, Yangyang and Han, Xue}, - year = {2020}, - month = oct, - journal = {Resources, Conservation and Recycling}, - volume = {161}, - pages = {105009}, - publisher = {{Elsevier B.V.}}, - issn = {18790658}, - doi = {10.1016/j.resconrec.2020.105009}, - urldate = {2020-07-14}, - abstract = {Household waste, as an inevitable result of daily activities, has attracted increasing attention, especially as it affects sustainable development. It is important to study the household waste separation behavior of individuals. Based on the theory of planned behavior, an extended theoretical model is constructed that considers perception of the outcomes in household waste separation to better illustrate individual behavior in waste separation. A comprehensive analysis is performed to explore the dynamic spread of pro-environmental and household waste separation information by conducting empirical research from 259 online questionnaires and a simulation of the evolution of household waste separation behavior in social networks. The dynamic spread of pro-environmental and household waste separation information influences the intention to sort waste, which determines waste sorting behavior. An analysis of the questionnaire data shows that considering others' advice and perception of the behavioral outcomes has a significant influence on the intention to separate waste. Moreover, the impact of media publicity on the individual intention to sort waste is negative, indicating a need to improve the quality of propaganda. The simulation findings also advocate for enhancing the connection of people in the network, making policies that set appropriate penalties and increasing personal repayment by emphasizing three parameters: the information interaction threshold value, penalty-promoting parameter, and personal motivation parameter. Our study enhances the understanding of the evolutionary process of household solid waste separation behavior and provides several suggestions for improving existing policies, and this study can serve as a valuable reference for waste management in social networks.}, - keywords = {China,Dynamics of opinion spread,Household waste separation,Social network,Theory of planned behavior} -} - -@article{zhenInternalizingExternalitiesNet2021, - title = {Internalizing Externalities through Net Ecosystem Service Analysis\textendash{{A}} Case Study of Greenhouse Vegetable Farms in {{Beijing}}}, - author = {Zhen, Huayang and Gao, Wenzeng and Yuan, Kai and Ju, Xuehai and Qiao, Yuhui}, - year = {2021}, - month = aug, - journal = {Ecosystem Services}, - volume = {50}, - pages = {101323}, - publisher = {{Elsevier BV}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2021.101323}, - urldate = {2021-07-05}, - abstract = {One of the causes for market failure is that product externalities are not internalized into product prices. A method was put forward to internalize the externalities into the prices of agro-products, both positive (ecosystem services (ESs)) and negative (ecosystem disservices (EDSs)) externalities generated from agroecosystems were integrated into the calculation of net ecosystem service (NES) through monetary analysis. The case study of greenhouse vegetable production was carried out in conventional (CON), organic (ORG), and community-supported agriculture (CSA) farms in Beijing suburbs. The total ESs value (124 thousand USD ha-1 yr-1) of CSA farms was the highest. The total EDSs value (28.1 thousand USD ha-1 yr-1) of CON farms was the highest, and was 21 and 35 times of ORG and CSA farms, respectively. Pesticides contributed to 76\% EDS value of CON farms. The NES values (without provisional ES) of CON, ORG and CSA farms were -25.4, 2.69, and 8.35 thousand USD ha-1 yr-1, respectively. The full prices of ORG (3.45 USD kg-1) and CSA (4.65 USD kg-1) vegetables were higher than those of CON (1.50 USD kg-1) vegetables. The market price of CON vegetables did not cover their value of net-negative externalities. The methodology of NES can be applied to comprehensively evaluate environmental sustainability, set fair prices for eco-friendly products, and provide a reference for eco-compensation. Further studies should be conducted, sampling more farms of different agroecosystems in different regions to test its applicability and practicality to provide substantial data for its broader application.} -} - -@article{Zhong2001, - title = {Short Fiber Reinforced Composites for Fused Deposition Modeling}, - author = {Zhong, Weihong and Li, Fan and Zhang, Zuoguang and Song, Lulu and Li, Zhimin}, - year = {2001}, - month = mar, - journal = {Materials Science and Engineering: A}, - volume = {301}, - number = {2}, - pages = {125--130}, - issn = {09215093}, - doi = {10.1016/S0921-5093(00)01810-4}, - urldate = {2015-01-22}, - keywords = {abs,composite,fused deposition modeling,short glass fiber}, - file = {/Users/fabio/Zotero/storage/YIDMQSFH/Zhong et al. - 2001 - Short fiber reinforced composites for fused deposition modeling.pdf} -} - -@article{Zhong2017, - title = {Energy {{Payback Time}} of a {{Solar Photovoltaic Powered Waste Plastic Recyclebot System}}}, - author = {Zhong, Shan and Rakhe, Pratiksha and Pearce, Joshua}, - year = {2017}, - month = jun, - journal = {Recycling}, - volume = {2}, - number = {2}, - pages = {10}, - issn = {2313-4321}, - doi = {10.3390/recycling2020010}, - isbn = {1906487146}, - keywords = {3-d printing,distributed manufacturing,energy payback time,epbt,life cycle analysis,photovoltaic,polymer filament,recyclebot,recycling,solar energy}, - file = {/Users/fabio/Zotero/storage/I2CG6WRJ/Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System.pdf} -} - -@article{Zhong2018, - title = {Tightening the Loop on the Circular Economy: {{Coupled}} Distributed Recycling and Manufacturing with Recyclebot and {{RepRap}} 3-{{D}} Printing}, - author = {Zhong, Shan and Pearce, Joshua M.}, - year = {2018}, - month = jan, - journal = {Resources, Conservation and Recycling}, - volume = {128}, - number = {July 2017}, - pages = {48--58}, - publisher = {{Elsevier}}, - issn = {09213449}, - doi = {10.1016/j.resconrec.2017.09.023}, - abstract = {A promising method of enhancing the circular economy is distributed plastic recycling. In this study plastic waste is upcycled into 3-D printing filament with a recyclebot, which is an open source waste plastic extruder. The recyclebot is combined with an open source self-replicating rapid prototyper (RepRap) 3-D printer, to enable post-consumer ABS plastic filament from computer waste to be further upcycled into valuable consumer products pre-designed in the digital commons. The total electrical energy consumption for the combined process is monitored and an economic evaluation is completed. The coupled distributed recycling and manufacturing method for complex products reduces embodied energy by half, while reducing the cost of consumer products to pennies. This economic benefit provides an incentive for consumers to both home recycle and home manufacture, which tightens the loop on the circular economy by eliminating waste associated from transportation and retail. It is clear from the results that waste plastic can be significantly upcycled at the individual level using this commons-based approach. This tightening of the loop of the circular economy benefits the environment and sustainability as well as the economic stability of consumers/prosumers.}, - keywords = {Circular economy,Distributed manufacturing,Distributed recycling,Energy conservation,Polymer recycling,Sustainable development}, - file = {/Users/fabio/Zotero/storage/REAV3XGH/Tightening the loop on the circular economy- Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing.pdf} -} - -@article{zhongEffectMicroplasticsEarthwormassisted2022, - title = {The Effect of Microplastics on Earthworm-Assisted Sludge Treatment Wetlands}, - author = {Zhong, Huiyuan and Li, Guangze and Zhang, Ying and Liu, Xiao and Liu, Chang}, - year = {2022}, - month = jan, - journal = {Journal of Cleaner Production}, - volume = {331}, - pages = {129941}, - publisher = {{Elsevier}}, - issn = {0959-6526}, - doi = {10.1016/J.JCLEPRO.2021.129941}, - urldate = {2021-12-10} -} - -@article{Zhou2000, - title = {Parametric Process Optimization to Improve the Accuracy of Rapid Prototyped Stereolithography Parts}, - author = {Zhou, Jack G. and Herscovici, Daniel and Chen, Calvin C.}, - year = {2000}, - month = feb, - journal = {International Journal of Machine Tools and Manufacture}, - volume = {40}, - number = {3}, - pages = {363--379}, - issn = {08906955}, - doi = {10.1016/S0890-6955(99)00068-1}, - urldate = {2014-04-08}, - abstract = {The functional requirements of a rapid prototyping system are speed and accuracy, and they are both functions of vendor defaulted and user selected manufacturing parameters. Accuracy is evaluated by dimensional errors, form errors and surface roughness of manufactured parts. A specially designed specimen with 20 dimensional, geometrical, and surface roughness features has been used in the inspection of RP manufacturing processes. In terms of Taguchi experimental design techniques, an orthogonal array of experiments has been developed which has the least number of experimental runs and desired process parameter settings. Using a 3-D coordinate measuring machine and surface profilometer, a series of measurements in evaluating the SLA parts quality has been conducted to find the functional relationships between the output part quality and input manufacturing process parameters. Two analysis tools, response surface methodology and Analysis of Variance (ANOVA), have been used to evaluate the SLA RP process and to perform the product optimization. The optimal setups of SLA manufacturing parameters for both individual features and a general part with various features have been concluded from this study.}, - file = {/Users/fabio/Zotero/storage/Q3JVPEP6/Parametric process optimization to improve the accuracy of rapid prototyped stereolithography parts.pdf} -} - -@article{Zhou2014, - title = {Characteristics and the Recovery Potential of Plastic Wastes Obtained from Landfill Mining}, - author = {Zhou, Chuanbin and Fang, Wenjun and Xu, Wanying and Cao, Aixin and Wang, Rusong}, - year = {2014}, - month = oct, - journal = {Journal of Cleaner Production}, - volume = {80}, - pages = {80--86}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2014.05.083}, - urldate = {2020-04-08}, - abstract = {Plastics have been the most consumed materials of human societies in recent decades and, in the mean time, one of the major products obtained from landfill mining. Characteristics of the landfill mined plastic wastes and their recovery potential were the key points to determine the feasibility of landfill mining projects. We collected municipal solid waste samples of different storage years from the landfill and did mechanical screening and manual separating to sort out plastic wastes, and a typical old landfill, which is of 24 storage years and located in central China, was taken as our studied case. According to our research, plastic wastes accounted for 10.62 {$\pm$} 5.12\% of the total stored wastes in the old landfill, among which, 69.13\% was plastic bags (white PE plastic bags accounted for 11.34\%; colored PE plastic bags 29.77\%; other plastic bags 28.02\%), and 30.87\% was other plastics (incl. PP, PVC, PS, etc.). The average moisture content in the plastic waste was 19.96 {$\pm$} 4.65\% and the average impurities content was 71.02 {$\pm$} 6.31\% before manual washing and cleaning. The VS, ash, fixed carbon and calorific value of manually cleaned plastic wastes were 87.09 {$\pm$} 0.55\%, 10.84 {$\pm$} 1.19\%, 2.07 {$\pm$} 0.85\% and 43.18 {$\pm$} 1.49 MJ kg-1, respectively. Elements testing (C, N, O, S, Cl, Si, Al) and surface images analysis under scanning electron microscope showed that normal cleaning techniques had a difficulty in thoroughly getting rid of all the impurities on the surface of plastic bags excavated from old landfill, which will impede plastic wastes from being mechanical recycled as renewable materials or being chemically recycled by either pyrolysis, gasification, hydrogenation. Incineration or treating as residue derived fuels (RDFs) for recovering energy was the most practical way to process landfill mining plastic wastes under the normal cleaning techniques. \textcopyright{} 2014 Elsevier Ltd. All rights reserved.}, - keywords = {Characteristics,Landfill mining,Plastic bag,Plastic waste,Recovery potential} -} - -@article{Zhou2015a, - title = {From {{3D}} to {{4D}} Printing: Approaches and Typical Applications}, - author = {Zhou, Ye and Huang, Wei Min and Kang, Shu Feng and Wu, Xue Lian and Lu, Hai Bao and Fu, Jun and Cui, Haipo}, - year = {2015}, - month = oct, - journal = {Journal of Mechanical Science and Technology}, - volume = {29}, - number = {10}, - pages = {4281--4288}, - issn = {1738-494X}, - doi = {10.1007/s12206-015-0925-0}, - abstract = {With the additional dimension, 4D printing is emerging as a novel technique to enable configuration switching in 3D printed items. In this paper, four major approaches, namely self-assembly of elements, deformation mismatch, bi-stability, and the Shape memory effect (SME), are identified as the generic approaches to achieve 4D printing. The main features of these approaches are briefly discussed. Utilizing these approaches either individually or in a combined manner, the potential of 4D printing to reshape product design is demonstrated by a few example applications.}, - isbn = {1738-494x}, - keywords = {3D printing,4D printing,Bi-stability,Deformation mismatch,Product design,Self-assembly,Shape memory effect}, - file = {/Users/fabio/Zotero/storage/VXB8WIA8/From 3D to 4D printing approaches and typical applications.pdf} -} - -@article{Zhou2019, - title = {Unfolding the Convergence Process of Scientific Knowledge for the Early Identification of Emerging Technologies}, - author = {Zhou, Yuan and Dong, Fang and Kong, Dejing and Liu, Yufei}, - year = {2019}, - month = jul, - journal = {Technological Forecasting and Social Change}, - volume = {144}, - pages = {205--220}, - publisher = {{Elsevier Inc.}}, - issn = {00401625}, - doi = {10.1016/j.techfore.2019.03.014}, - urldate = {2020-05-10}, - abstract = {The convergence of multi-disciplinary knowledge may spur emerging technologies. It is important to understand this convergence process that helps to identify these emergent technologies; however, relevant research remains sparse. Therefore, this study aims to develop a novel framework to reveal the convergence process of scientific knowledge. This novel framework integrates the machine-learning topology clustering and visualization methods, and analyzes paper citation networks. This study selects the biological\textendash informatics domain (bioinformatics) to conduct the empirical analysis. This paper finds two major stages throughout the convergence process: the fast-changing incubation stage and the stabilized development stage. In the incubation stage, the interactions between the biology and informatics knowledge domains becomes increasingly intensive, while emergent technology is yet to form; in the stable development stage, the emergent technology starts to form as a core cluster, and based on which it grows amid stabilized knowledge interactions between the original two domains. The revelation of this convergence process contributes to the formation theory of emerging technologies that are inter-disciplinary, and is of great interest to researchers, policy makers, and industrialists.}, - keywords = {Convergence process,Early identification,Emerging technology,Scientific knowledge}, - file = {/Users/fabio/Zotero/storage/VUCXTRNJ/full-text.pdf} -} - -@article{zhouDesigningSmartIncentivebased2021, - title = {Designing a Smart Incentive-Based Recycling System for Household Recyclable Waste}, - author = {Zhou, Jieyu and Jiang, Peng and Yang, Jin and Liu, Xiao}, - year = {2021}, - month = mar, - journal = {Waste Management}, - volume = {123}, - pages = {142--153}, - publisher = {{Pergamon}}, - issn = {0956053X}, - doi = {10.1016/j.wasman.2021.01.030}, - urldate = {2021-02-14} -} - -@article{zhouLifeCycleAssessment2023, - title = {Life Cycle Assessment of Polycarbonate Production: {{Proposed}} Optimization toward Sustainability}, - shorttitle = {Life Cycle Assessment of Polycarbonate Production}, - author = {Zhou, Xinying and Zhai, Yijie and Ren, Ke and Cheng, Ziyue and Shen, Xiaoxu and Zhang, Tianzuo and Bai, Yueyang and Jia, Yuke and Hong, Jinglan}, - year = {2023}, - month = feb, - journal = {Resources, Conservation and Recycling}, - volume = {189}, - pages = {106765}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2022.106765}, - urldate = {2022-12-12}, - abstract = {The global plastics industry urgently requires a shift to sustainable manufacturing, but only a mere fraction of these plastics have been explored for their life cycle environmental impacts. Polycarbonate (PC), the top consumer of engineering plastics, lacks due attention. This study quantified the industrial-level environmental impacts of two mainstream PC production processes in China, the world's largest PC producer, via an integrated and regionalized life cycle impact assessment model. The fossil depletion category contributed dominant environmental impacts, accounting for approximately 60\% in both scenarios. Bisphenol A production and coal mining and combustion were identified as crucial processes, specifying optimal directions toward sustainability. The PC green factories showed eco-effectiveness, with roughly 10\% reductions in both non-carcinogens and global warming categories at the leading level. The mechanically recycled PC production could yield 82.3\%\textendash 99.6\% benefits in key categories. Moreover, green mines, ultra-low emission, bio-based plastics, and extended producer responsibility are highly recommended.}, - langid = {english}, - keywords = {Green factory,Life cycle assessment,Polycarbonate production,Polycarbonate recycling,Sustainable manufacturing}, - file = {/Users/fabio/Zotero/storage/2E8GI54Y/Zhou et al_2023_Life cycle assessment of polycarbonate production.pdf;/Users/fabio/Zotero/storage/YW5FCH2E/S0921344922005973.html} -} - -@inproceedings{zhouNewBusinessModel2022, - title = {New {{Business Model}} of {{Furniture}} from {{Recycled Plastic Waste}}}, - booktitle = {Proceedings of the 2022 {{International Conference}} on {{Business}} and {{Policy Studies}}}, - author = {Zhou, Haitian and Wang, Tiening and Wu, Tingyi and Huang, Jincheng}, - editor = {Li, Xiaolong and Yuan, Chunhui and Ganchev, Ivoslav}, - year = {2022}, - series = {Applied {{Economics}} and {{Policy Studies}}}, - pages = {832--842}, - publisher = {{Springer Nature}}, - address = {{Singapore}}, - doi = {10.1007/978-981-19-5727-7_84}, - abstract = {The alarming rate at which the amount of plastic is growing in the ocean potentially results in major environmental issues. Environmentally friendly firms nowadays are all focused on creating awareness on recycling since it is much more efficient, reliable, and cheap to recycle by doing so. By discovering a new sustainable methodology ensures that the amount of plastic entering the ocean dramatically reduces. For this same reason, a group of locals in Hong Kong who have massively settled across the Shing Mun River have collected plastic wastes from the river before it enters the oceans and recycles them to make furniture. It is not just an effective way of sustaining ocean pollution but has also proved to be a reliable source of income for the locals. Consequently, for the purpose of this research paper, it will further elaborate on the various ways through which plastic waste has been recycled to make public furniture in Hong Kong and the various measures taken to strengthen the market on buying furniture made from recycled furniture plastic waste.}, - isbn = {978-981-19572-7-7}, - langid = {english}, - keywords = {Furniture production process,New business model,Personalized furniture,Solve plastic waste,Sustainable waste recycling} -} - -@article{Zhu2019, - title = {Remanufacturing Subsidy or Carbon Regulation? {{An}} Alternative toward Sustainable Production}, - author = {Zhu, Xiaoxi and Ren, Minglun and Chu, Wei and Chiong, Raymond}, - year = {2019}, - month = dec, - journal = {Journal of Cleaner Production}, - volume = {239}, - pages = {117988}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.117988} -} - -@article{Zhu2020, - title = {Liu {{Zeyuan}}'s Philosophy of Engineering and Technology: {{An}} Introduction to His {{Marxist}} Socioeconomic Theory}, - author = {Zhu, Qin and Mitcham, Carl}, - year = {2020}, - month = aug, - journal = {Technology in Society}, - pages = {101351}, - publisher = {{Pergamon}}, - issn = {0160791X}, - doi = {10.1016/j.techsoc.2020.101351}, - urldate = {2020-08-26} -} - -@article{Zhuang2013, - title = {Multi-Scale Modeling for Sustainable Chemical Production}, - author = {Zhuang, Kai and Bakshi, Bhavik R. and Herrg{\aa}rd, Markus J.}, - year = {2013}, - month = sep, - journal = {Biotechnology Journal}, - volume = {8}, - number = {9}, - pages = {973--984}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {18606768}, - doi = {10.1002/biot.201200272}, - urldate = {2021-09-20}, - abstract = {With recent advances in metabolic engineering, it is now technically possible to produce a wide portfolio of existing petrochemical products from biomass feedstock. In recent years, a number of modeling approaches have been developed to support the engineering and decision-making processes associated with the development and implementation of a sustainable biochemical industry. The temporal and spatial scales of modeling approaches for sustainable chemical production vary greatly, ranging from metabolic models that aid the design of fermentative microbial strains to material and monetary flow models that explore the ecological impacts of all economic activities. Research efforts that attempt to connect the models at different scales have been limited. Here, we review a number of existing modeling approaches and their applications at the scales of metabolism, bioreactor, overall process, chemical industry, economy, and ecosystem. In addition, we propose a multi-scale approach for integrating the existing models into a cohesive framework. The major benefit of this proposed framework is that the design and decision-making at each scale can be informed, guided, and constrained by simulations and predictions at every other scale. In addition, the development of this multi-scale framework would promote cohesive collaborations across multiple traditionally disconnected modeling disciplines to achieve sustainable chemical production. \textcopyright{} 2013 WILEY-VCH Verlag GmbH \& Co. KGaA, Weinheim.}, - pmid = {23520143}, - keywords = {Biochemicals,Life cycle analysis,Metabolic modeling,Multi-scale modeling,Sustainability}, - file = {/Users/fabio/Zotero/storage/PBM9YKGG/full-text.pdf} -} - -@article{zhuEvolutionResearchResources2023, - title = {The Evolution of Research in Resources, Conservation \& Recycling Revealed by {{Word2vec-enhanced}} Data Mining}, - author = {Zhu, Jun-Jie and Ren, Zhiyong Jason}, - year = {2023}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {190}, - pages = {106876}, - issn = {0921-3449}, - doi = {10.1016/j.resconrec.2023.106876}, - urldate = {2023-02-12}, - abstract = {Resources, Conservation \& Recycling (RCR) publishes original research in technological, economic, institutional, policy, and system-wide aspects of resource management and sustainability. Here we developed natural language processing (NLP) and Word2vec-based techniques to reveal for the first time the underlying patterns, interactions of research topics, and topical vectors and their connections with 10 resources covered in RCR based on all 4884 articles published since its inception. The 49 most trending-up, specific topics can be arranged into nine groups: general resources and materials, waste-based resources and materials, industrial management, human behaviors, analyzing methodologies, sustainable economy, climate-relevant, other sustainability, and other problems. The Word2vec-RCR model exhibits the distribution of topic vectors based on t-SNE, and the topics can be visually grouped into 13 major regions. The newly developed Word2vec model is proven to be effective for understanding evolution and interactions between research topics and defined subjects in RCR and broader environmental domains.}, - langid = {english}, - keywords = {Natural language processing,Research interconnection,Resource,Sustainability,Topical evolution,Word embedding}, - file = {/Users/fabio/Zotero/storage/SD4Y9UQA/Zhu_Ren_2023_The evolution of research in resources, conservation & recycling revealed by.pdf;/Users/fabio/Zotero/storage/WHXRRTSD/S0921344923000137.html} -} - -@article{Zhuo2014, - title = {Upcycling Waste Plastics into Carbon Nanomaterials: {{A}} Review}, - author = {Zhuo, Chuanwei and Levendis, Yiannis A.}, - year = {2014}, - month = feb, - journal = {Journal of Applied Polymer Science}, - volume = {131}, - number = {4}, - pages = {n/a-n/a}, - issn = {00218995}, - doi = {10.1002/app.39931}, - abstract = {Polymer production and utilization are currently widespread and have greatly improved people's standards of living. However, due to their stable and nonbiodegradable nature, postconsumer polymers pose challenging issues to the environment and ecosystems. Efforts are being made not only to contain the generation of polymer wastes and associated littering but, also, to find ways of utilizing them sustainably. Aside from mechanical recycling, which turns postconsumer polymers into new polymer products, and thermal recycling, which releases the thermal energy contained within waste plastics through combustion, chemical recycling converts waste polymers into feedstock for chemicals/materials/fuels production. This manuscript reviews prior work on a special application of the particular chemical recycling route that converts polymers into carbon-based nanomaterials. These materials feature extraordinary physical and chemical properties with tremendous applications potential. However, their production processes are both resource- and energy-intensive. Yet, by taking advantage of the high carbon content of waste polymers, as well as of their high energy content, a cost-effective, environmentally-friendly, and self-sustaining production of carbon nanomaterials can be achieved. \textcopyright{} 2013 Wiley Periodicals, Inc.}, - keywords = {applications,degradation,graphene and fullerenes,nanotubes,recycling,synthesis and processing}, - file = {/Users/fabio/Zotero/storage/SXILFPLP/Upcycling waste plastics into carbon nanomaterials- A review.pdf} -} - -@article{zhuPackagingDesignCircular2022, - ids = {zhu2022a}, - title = {Packaging Design for the Circular Economy: {{A}} Systematic Review}, - author = {Zhu, Zicheng and Liu, Wei and Ye, Songhe and Batista, Luciano}, - year = {2022}, - month = jul, - journal = {Sustainable Production and Consumption}, - volume = {32}, - pages = {817--832}, - publisher = {{Elsevier}}, - issn = {2352-5509}, - doi = {10.1016/J.SPC.2022.06.005}, - urldate = {2022-06-13} -} - -@article{zhurakovskayaInnovationsEducationDevelopment2020, - title = {Innovations in {{Education}}\textemdash{{The Development}} of a {{New Pedagogical Technology}} of a {{Combinational Type}}, {{Focused}} on the {{Development}} of {{Personality}} of {{Students}}}, - author = {Zhurakovskaya, Vera and Sichinava, Aleksandr and Simakova, Tatyana and Olicheva, Olga and Rykov, Sergey and Valeeva, Julya and Kulachinskaya, Anastasia and Ilyashenko, Svetlana}, - year = {2020}, - month = oct, - journal = {Journal of Open Innovation: Technology, Market, and Complexity}, - volume = {6}, - number = {4}, - pages = {123}, - publisher = {{Multidisciplinary Digital Publishing Institute}}, - issn = {2199-8531}, - doi = {10.3390/joitmc6040123}, - urldate = {2020-10-28}, - abstract = {{$<$}p{$>$}The paper considers the problem of adolescent and young students' personalities' development in the conditions of face-to-face and distance school learning. The scientific novelty of the study is the proposed classification of pedagogical technologies according to the degree of their novelty: modernized technology, combinational technology, progressive technology, pedagogical technology of the combinational type, the essence of which is shown in its title. A specific model of pedagogical technology of the combinational type ``Teaching in cooperation, in a team using flipped classroom'' was developed. The developed technology was implemented during the classes of the humanities and natural-mathematical cycles. Nine hundred and eight adolescent and young students (divided into experimental and control groups) and 32 teachers participated in the experimental work. To analyze the differences between the experimental and control groups in terms of the student's personality manifestation, several criteria and indicators were considered. For mathematical and statistical processing of the obtained results, the multifunctional statistical Fisher's F-test was used. Analysis of the implementation of the developed technology in the conditions of face-to-face and distance learning showed a positive dynamics of experience formation of the student's personality manifestation. This allowed the authors to consider the developed pedagogical means effective.{$<$}/p{$>$}}, - keywords = {blended learning,combinational technology,distance learning,e-learning,flipped classroom,student personality}, - file = {/Users/fabio/Zotero/storage/UX8PVEC3/full-text.pdf} -} - -@article{Zia2007, - title = {Methods for Polyurethane and Polyurethane Composites, Recycling and Recovery: {{A}} Review}, - author = {Zia, Khalid Mahmood and Bhatti, Haq Nawaz and Ahmad Bhatti, Ijaz}, - year = {2007}, - month = aug, - journal = {Reactive and Functional Polymers}, - volume = {67}, - number = {8}, - pages = {675--692}, - issn = {13815148}, - doi = {10.1016/j.reactfunctpolym.2007.05.004}, - urldate = {2014-06-04}, - keywords = {energy recovery,glycolysis,polyurethane,recovery,recycling,regrinding}, - file = {/Users/fabio/Zotero/storage/2RU8846B/Zia, Bhatti, Ahmad Bhatti - 2007 - Methods for polyurethane and polyurethane composites, recycling and recovery A review.pdf} -} - -@article{zieglerEmbeddingCircularityTheorizing2023, - title = {Embedding Circularity: {{Theorizing}} the Social Economy, Its Potential, and Its Challenges}, - shorttitle = {Embedding Circularity}, - author = {Ziegler, Rafael and Bauwens, Thomas and Roy, Michael J. and Teasdale, Simon and Fourrier, Ambre and Raufflet, Emmanuel}, - year = {2023}, - month = dec, - journal = {Ecological Economics}, - volume = {214}, - pages = {107970}, - issn = {0921-8009}, - doi = {10.1016/j.ecolecon.2023.107970}, - urldate = {2023-08-31}, - abstract = {The dominant conception of the circular economy presents it as a politically neutral, technology-driven process of efficiency improvements and green market expansion. However, it does not consider the social embedding of circularity and thereby risks undermining the transition out of de facto linear economies. This paper begins with a critique of the dominant conception of the circular economy and its shortcomings in relation to allocation, justice, and sustainable scale. Second, the paper contributes toward theorizing an alternative, social economy-based embedding of circularity. We theorize how the social economy embeds circularity through: (1) business models reflecting the needs and interests of their stakeholders and, with them, a primacy of social value creation; (2) production and consumption based on active citizen involvement in deliberation and decision-making; (3) an approach to technology that seeks to empower technology users; and (4) the promotion of regional economies and circular value chains based on a sense of place. Our theory propositions are inspired by prior empirical research at the intersection of the circular economy and the social economy. We discuss the potential and the challenges of a social economy embedding of circularity against the background of vested interests and incumbents profiting from low circularity and unsustainability.}, - keywords = {Business models,Circular economy,Cooperatives,Embeddedness,Governance,Social and solidarity economy,Transformation}, - file = {/Users/fabio/Zotero/storage/937KBUAU/S0921800923002331.html} -} - -@article{zieglerSocialInnovationBiodiversity2022, - title = {Social Innovation for Biodiversity: {{A}} Literature Review and Research Challenges}, - author = {Ziegler, Rafael and {Balzac-Arroyo}, Josephine and H{\"o}lsgens, Rick and Holzgreve, Sarah and Lyon, Fergus and Spangenberg, Joachim H. and Thapa, Philipp P.}, - year = {2022}, - month = mar, - journal = {Ecological Economics}, - volume = {193}, - pages = {107336}, - publisher = {{Elsevier}}, - issn = {0921-8009}, - doi = {10.1016/J.ECOLECON.2021.107336}, - urldate = {2022-01-25} -} - -@article{zimmermannMovingOnlineReflections2021, - title = {Moving Online: Reflections from Conducting System Dynamics Workshops in Virtual Settings}, - author = {Zimmermann, Nici and Pluchinotta, Irene and Salvia, Giuseppe and Touchie, Marianne and Stopps, Helen and Hamilton, Ian and Kesik, Ted and Dianati, Kaveh and Chen, Ting}, - year = {2021}, - month = jan, - journal = {System Dynamics Review}, - volume = {37}, - number = {1}, - pages = {59--71}, - publisher = {{John Wiley and Sons Ltd}}, - issn = {10991727}, - doi = {10.1002/sdr.1667}, - urldate = {2021-06-08}, - file = {/Users/fabio/Zotero/storage/UA43IFAH/full-text.pdf} -} - -@article{zinkCircularEconomyRebound2017, - title = {Circular {{Economy Rebound}}}, - author = {Zink, Trevor and Geyer, Roland}, - year = {2017}, - journal = {Journal of Industrial Ecology}, - volume = {21}, - number = {3}, - pages = {593--602}, - issn = {1530-9290}, - doi = {10.1111/jiec.12545}, - urldate = {2023-05-14}, - abstract = {The so-called circular economy\textemdash the concept of closing material loops to preserve products, parts, and materials in the industrial system and extract their maximum utility\textemdash has recently started gaining momentum. The idea of substituting lower-impact secondary production for environmentally intensive primary production gives the circular economy a strong intuitive environmental appeal. However, proponents of the circular economy have tended to look at the world purely as an engineering system and have overlooked the economic part of the circular economy. Recent research has started to question the core of the circular economy\textemdash namely, whether closing material and product loops does, in fact, prevent primary production. In this article, we argue that circular economy activities can increase overall production, which can partially or fully offset their benefits. Because there is a strong parallel in this respect to energy efficiency rebound, we have termed this effect ``circular economy rebound.'' Circular economy rebound occurs when circular economy activities, which have lower per-unit-production impacts, also cause increased levels of production, reducing their benefit. We describe the mechanisms that cause circular economy rebound, which include the limited ability of secondary products to substitute for primary products, and price effects. We then offer some potential strategies for avoiding circular economy rebound. However, these strategies are unlikely to be attractive to for-profit firms, so we caution that simply encouraging private firms to find profitable opportunities in the circular economy is likely to cause rebound and lower or eliminate the potential environmental benefits.}, - copyright = {\textcopyright{} 2017 by Yale University}, - langid = {english}, - keywords = {circular economy,closed looprecycling,economics,industrial ecology,rebound effect,reuse}, - file = {/Users/fabio/Zotero/storage/IGETAMT2/Zink y Geyer - 2017 - Circular Economy Rebound.pdf;/Users/fabio/Zotero/storage/6C499U4J/jiec.html} -} - -@article{zinkMaterialRecyclingMyth2019, - title = {Material {{Recycling}} and the {{Myth}} of {{Landfill Diversion}}}, - author = {Zink, Trevor and Geyer, Roland}, - year = {2019}, - month = jun, - journal = {Journal of Industrial Ecology}, - volume = {23}, - number = {3}, - pages = {541--548}, - publisher = {{John Wiley \& Sons, Ltd}}, - issn = {1530-9290}, - doi = {10.1111/JIEC.12808}, - urldate = {2022-01-25}, - abstract = {Proponents of material recycling typically point to two environmental benefits: disposal (landfill/incinerator) reduction and primary production displacement. However, in this paper we mathematically demonstrate that, without displacement, recycling can delay but not prevent any existing end-of-life material from reaching final disposal. The only way to reduce the amount of material ultimately landfilled or incinerated is to produce less in the first place; material that is not made needs not be disposed. Recycling has the potential to reduce the amount of material reaching end of life solely by reducing primary production. Therefore, the ``dual benefits'' of recycling are in fact one, and the environmental benefit of material recycling rests in its potential to displace primary production. However, displacement of primary production from increased recycling is driven by market forces and is not guaranteed. Improperly assuming all recycled material avoids disposal underestimates the environmental impacts of the product system. We show that the potential magnitude of this error is substantial, though for inert recyclables it is lower than the error introduced by improperly assuming all recycled material displaces primary material production. We argue that life cycle assessment end-of-life models need to be updated so as not to overstate the benefits of recycling. Furthermore, scholars and policy makers should focus on finding and implementing ways to increase the displacement potential of recyclable materials rather than focusing on disposal diversion targets.}, - keywords = {circular economy,displacement,industrial ecology,landfill,recycling,waste management} -} - -@article{Ziout2014, - title = {A Holistic Approach for Decision on Selection of End-of-Life Products Recovery Options}, - author = {Ziout, A. and Azab, A. and Atwan, M.}, - year = {2014}, - journal = {Journal of Cleaner Production}, - volume = {65}, - pages = {497--516}, - publisher = {{Elsevier Ltd}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2013.10.001}, - abstract = {Decision on end-of-life product recovery options is affected by many factors; they are factors related to engineering, business, environmental, and societal factors. These factors come from wide spectrum of stakeholders' interests. Perspectives vary from one stakeholder to another; hence, some of these factors are conflicting. For example, product designers' interest in composite light weight material may conflict with recycler's interest in pure and easy-to-recycle material. A method that identifies all stakeholders who are directly involved or indirectly affected by such decision would be beneficial to the selection of right product recovery option. This paper provides a method that guides the process of decision making on end-of-life product recovery option. The method is different from previous ones in its inclusion of all stakeholders who has interest in the process. The proposed method gives decision maker flexibility to accommodate for different cases (Case specific situations). It is enough comprehensive to be general and enough flexible to be specific, this would make the decision taken using this method accurate by selecting appropriate recovery options, and informative by presenting the most influential factors that lead to the decision. Previous methods found in literature are reviewed and been inconsideration when developing the proposed method. Knowledge obtained from industrial best practices and well documented case studies also included. Product designers and business decision makers would benefit from this work on deciding about the fate of their product as a whole or its constituents. The implementation of the developed method is demonstrated through an industrial product; the method robustness is tested by assessing its sensitivity to extreme situations. In conclusion, the decision on end-of-life product recovery option is governed by different stakeholders. A method that considers the collective interests of all stakeholders is apparently needed; such method is developed in this paper and is validated using industrial example. \textcopyright{} 2013 Elsevier Ltd. All rights reserved.}, - isbn = {09596526}, - keywords = {Product end-of-life,Sustainable design,Sustainable product life cycle}, - file = {/Users/fabio/Zotero/storage/3M45IVJ4/A holistic approach for decision on selection of end-of-life products recovery options.pdf} -} - -@article{Zisook2020, - title = {Emissions Associated with Operations of Four Different Additive Manufacturing or {{3D}} Printing Technologies}, - author = {Zisook, Rachel E. and Simmons, Brooke D. and Vater, Mark and Perez, Angela and Donovan, Ellen P. and Paustenbach, Dennis J. and Cyrs, William D.}, - year = {2020}, - month = oct, - journal = {Journal of Occupational and Environmental Hygiene}, - volume = {17}, - number = {10}, - pages = {464--479}, - issn = {1545-9624}, - doi = {10.1080/15459624.2020.1798012} -} - -@article{zisopoulosHowRobustCircular2022, - title = {How Robust Is the Circular Economy in {{Europe}}? {{An}} Ascendency Analysis with {{Eurostat}} Data between 2010 and 2018}, - author = {Zisopoulos, Filippos K. and Schraven, Daan F.J. and {de Jong}, Martin}, - year = {2022}, - month = mar, - journal = {Resources, Conservation and Recycling}, - volume = {178}, - pages = {106032}, - publisher = {{Elsevier}}, - issn = {0921-3449}, - doi = {10.1016/J.RESCONREC.2021.106032}, - urldate = {2021-12-10} -} - -@article{zisopoulosInformalRecyclersStakeholders2023, - title = {Informal Recyclers as Stakeholders in a Circular Economy}, - author = {Zisopoulos, Filippos K. and Steuer, Benjamin and Abussafy, Ricardo and {Toboso-Chavero}, Susana and Liu, Zhaowen and Tong, Xin and Schraven, Daan}, - year = {2023}, - month = aug, - journal = {Journal of Cleaner Production}, - volume = {415}, - pages = {137894}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2023.137894}, - urldate = {2023-07-06}, - abstract = {The inclusion of the informal recycling sector (IRS) in a circular economy (CE) is challenging and it is gaining increasing attention by the academic community in an exponential yet fragmented way. In this narrative review, we demarcate the direct and indirect contributions of the IRS to various domains of the CE by drawing knowledge from relevant literature. First, we capture the modi operandi of different forms of recycling value chains into a typology. We do so based on distinct foci and policy approaches towards the IRS which have been adopted across different countries. Second, we synthesize various threads of information on reported forms of collaboration, tensions, and challenges in the context of urban waste management, into a conceptual framework to facilitate transitions towards circular and inclusive wise-waste systems. Finally, we discuss important aspects related to circular business models and integration approaches towards the IRS, and we propose avenues for further research.}, - langid = {english}, - keywords = {Narrative review,Social inclusion,Urban resilience,Waste hierarchy,Waste management,Waste pickers}, - file = {/Users/fabio/Zotero/storage/XI8TGBH4/Zisopoulos et al. - 2023 - Informal recyclers as stakeholders in a circular e.pdf;/Users/fabio/Zotero/storage/F43UYCLR/S0959652623020528.html} -} - -@article{Zivkovic2018, - title = {Systemic Innovation Labs: A Lab for Wicked Problems}, - author = {Zivkovic, Sharon}, - year = {2018}, - month = aug, - volume = {14}, - number = {3}, - pages = {348--366}, - publisher = {{Emerald Publishing Limited}}, - issn = {17508533}, - doi = {10.1108/SEJ-04-2018-0036}, - abstract = {Purpose The purpose of this paper is to question the appropriateness of current lab types for addressing wicked problems. A new lab type, a Systemic Innovation Lab, is proposed which combines the features of existing labs that are suited to addressing wicked problems. Design/methodology/approach Characteristics of initiatives that are considered appropriate for addressing wicked problems and existing lab types that contain any of these characteristics are identified. These lab types are Social Innovation Labs, Living Labs, Urban Living Labs, Urban Transition Labs and Public Sector Innovation Labs. The proposed new lab type is reasoned by combining the features of existing labs that are suited to addressing wicked problems. How the new lab would work in practice is illustrated with a case study. Findings When addressing wicked problems, labs need to take a systemic design and not a service design approach. They also need to focus on addressing complex problems, take a place-based and transition approach, enable coherent action by diverse actors, involve users as co-creators, support a networked governance approach and recognize government as an enabler of change. Practical implications This paper provides a new lab type designed specifically for addressing wicked problems. This new lab supports practitioners that take a systemic design, solution ecosystem and systemic innovation approach. Systemic design is based on a core set of principles that are a crossover between design and complexity theory. Originality/value For the first time, this paper analyzes different lab types to determine their appropriateness for addressing wicked problems. It also proposes a new lab type whose sole purpose is addressing wicked problems.}, - keywords = {Complexity theory,Labs,Systemic design,Wicked problems}, - file = {/Users/fabio/Zotero/storage/WSGWCML9/Zivkovic_2018_Systemic innovation labs.pdf} -} - -@article{zizkaSustainabilityScienceTechnology2020, - title = {Sustainability in {{Science}}, {{Technology}}, {{Engineering}} and {{Mathematics}} ({{STEM}}) Programs: {{Authentic}} Engagement through a Community-Based Approach}, - author = {Zizka, Laura and McGunagle, Doreen M. and Clark, Patti J.}, - year = {2020}, - month = aug, - journal = {Journal of Cleaner Production}, - pages = {123715}, - publisher = {{Elsevier}}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2020.123715}, - urldate = {2020-08-18} -} - -@article{Zocca2015, - title = {Additive {{Manufacturing}} of {{Ceramics}}: {{Issues}}, {{Potentialities}}, and {{Opportunities}}}, - author = {Zocca, Andrea and Colombo, Paolo and Gomes, Cynthia M. and G{\"u}nster, Jens}, - year = {2015}, - journal = {Journal of the American Ceramic Society}, - volume = {98}, - number = {7}, - pages = {1983--2001}, - issn = {15512916}, - doi = {10.1111/jace.13700}, - abstract = {Additive manufacturing (AM) is a technology which has the potential not only to change the way of conventional industrial manufacturing processes, adding material instead of subtracting, but also to create entirely new production and business strategies. Since about three decades, AM technologies have been used to fabricate prototypes or models mostly from polymeric or metallic materials. Recently, products have been introduced into the market that cannot be produced in another way than additively. Ceramic materials are, however, not easy to process by AM technologies, as their processing requirements (in terms of feedstock and/or sintering) are very challenging. On the other hand, it can be expected that AM technologies, once successful, will have an extraordinary impact on the industrial production of ceramic components and, moreover, will open for ceramics new uses and new markets.}, - isbn = {1551-2916} -} - -@article{zoellickItNotAll2018, - title = {It's Not (All) about Efficiency: {{Powering}} and Organizing Technology from a Degrowth Perspective}, - shorttitle = {It's Not (All) about Efficiency}, - author = {Zoellick, Jan Cornelius and Bisht, Arpita}, - year = {2018}, - month = oct, - journal = {Journal of Cleaner Production}, - series = {Technology and {{Degrowth}}}, - volume = {197}, - pages = {1787--1799}, - issn = {0959-6526}, - doi = {10.1016/j.jclepro.2017.03.234}, - urldate = {2022-10-11}, - abstract = {Transgressions of ecological boundaries and increasing social inequality question the paradigm of continual economic growth guided by technological efficiency - often cited as the only solution to these crises. This paper develops a critical and diversified viewpoint on technology for degrowth. `Classical perspectives' of Illich's convivial society, Elull's critique of technique, Mumford's tools and machines, and Schumacher's critique of gigantic techno-infrastructures are explored and combined with Arendt's instrumentality of technologies and Marxist perspectives on ownership. Two questions are posed regarding technology. First, which technologies are 'suitable' for a degrowth context? Previous frameworks by Illich and Schumacher are extended by ecological aspects to assess the suitability of technologies. Second, how should 'suitable' technologies be structured to enable egalitarian utilization? Here, Schumacher's ``intermediate technologies'' and ownership are central elements. The frameworks and analysis add value for degrowth activists and bridge the gap scientifically between Marxist views and those of degrowth. In conclusion, technologies in degrowth are suitable if they reduce ecological impact, enhance autonomy and conviviality, and are structurally available in an egalitarian way based on open-access regimes. In the discussion further research questions are posed regarding transforming agents and power relations between grassroots and the state. Limitations of the framework include the role of digital technologies for communication, here treated as electric tools, and the focus on industrialized societies.}, - langid = {english}, - file = {/Users/fabio/Zotero/storage/8JQ75RKT/Zoellick y Bisht - 2018 - It's not (all) about efficiency Powering and orga.pdf;/Users/fabio/Zotero/storage/GANUBBQJ/S095965261730642X.html} -} - -@article{ZoroufchiBenis2019, - title = {Municipal Solid Waste Characterization and Household Waste Behaviors in a Megacity in the Northwest of {{Iran}}}, - author = {Zoroufchi Benis, {\relax Kh}. and Safaiyan, A. and Farajzadeh, D. and Khalili Nadji, F. and Shakerkhatibi, M. and Harati, H. and Safari, G. H. and Sarbazan, M. H.}, - year = {2019}, - month = aug, - journal = {International Journal of Environmental Science and Technology}, - volume = {16}, - number = {8}, - pages = {4863--4872}, - issn = {1735-1472}, - doi = {10.1007/s13762-018-1902-9} -} - -@article{Zorpas2017, - title = {Effectiveness of Waste Prevention Program in Primary Students' Schools}, - author = {Zorpas, Antonis A. and Voukkali, Irene and Loizia, Pantelitsa}, - year = {2017}, - month = jun, - journal = {Environmental Science and Pollution Research}, - volume = {24}, - number = {16}, - pages = {14304--14311}, - issn = {0944-1344}, - doi = {10.1007/s11356-017-8968-7} -} - -@misc{zotero-4357, - urldate = {2023-09-06}, - howpublished = {https://www.lenslab.polimi.it/}, - file = {/Users/fabio/Zotero/storage/KLDVYKDF/www.lenslab.polimi.it.html} -} - -@article{Zulian2018, - title = {Practical Application of Spatial Ecosystem Service Models to Aid Decision Support}, - author = {Zulian, Grazia and Stange, Erik and Woods, Helen and Carvalho, Laurence and Dick, Jan and Andrews, Christopher and Bar{\'o}, Francesc and Vizcaino, Pilar and Barton, David N. and Nowel, Megan and Rusch, Graciela M. and Autunes, Paula and Fernandes, Jo{\~a}o and Ferraz, Diogo and {Ferreira dos Santos}, Rui and Aszal{\'o}s, R{\'e}ka and Arany, Ildik{\'o} and Cz{\'u}cz, B{\'a}lint and Priess, Joerg A. and Hoyer, Christian and {B{\"u}rger-Patricio}, Gleiciani and Lapola, David and Mederly, Peter and Halabuk, Andrej and Bezak, Peter and Kopperoinen, Leena and Viinikka, Arto}, - year = {2018}, - journal = {Ecosystem Services}, - volume = {29}, - pages = {465--480}, - publisher = {{The Authors}}, - issn = {22120416}, - doi = {10.1016/j.ecoser.2017.11.005}, - abstract = {Ecosystem service (ES) spatial modelling is a key component of the integrated assessments designed to support policies and management practices aiming at environmental sustainability. ESTIMAP (``Ecosystem Service Mapping Tool'') is a collection of spatially explicit models, originally developed to support policies at a European scale. We based our analysis on 10 case studies, and 3 ES models. Each case study applied at least one model at a local scale. We analyzed the applications with respect to: the adaptation process; the ``precision differential'' which we define as the variation generated in the model between the degree of spatial variation within the spatial distribution of ES and what the model captures; the stakeholders' opinions on the usefulness of models. We propose a protocol for adapting ESTIMAP to the local conditions. We present the precision differential as a means of assessing how the type of model and level of model adaptation generate variation among model outputs. We then present the opinion of stakeholders; that in general considered the approach useful for stimulating discussion and supporting communication. Major constraints identified were the lack of spatial data with sufficient level of detail, and the level of expertise needed to set up and compute the models.}, - keywords = {Ecosystem services maps,Map comparison,Spatial modelling,Stakeholders' survey}, - file = {/Users/fabio/Zotero/storage/J9YTJMLS/Practical-application-of-spatial-ecosystem-service-models-_2018_Ecosystem-Se.pdf} -} - -@article{Zurynski2014, - title = {Writing a Systematic Literature Review : {{Resources}} for Students and Trainees}, - author = {Zurynski, Yvonne}, - year = {2014}, - journal = {Australian Paediatric Survaillance Unit}, - number = {June}, - pages = {1--7}, - abstract = {A systematic review is a review of the literature that addresses a clearly formulated question and uses systematic and explicit methods to: identify publications, select publications relevant to the question critically appraise the publications analyse the data reported in the relevant publications report the combined results from relevant publications. Meta-analysis is a statistical method that integrates and summarises results from relevant publications selected in the systematic review. NOT ALL systematic reviews use meta-analysis. Meta-analysis is particularly useful where the systematic review aims to determine the magnitude of quantifiable effects attributable to e.g. a drug, a behavioural intervention, etc. The above are based on definitions published by the Cochrane Collaboration, which is " \ldots a global independent network of health practitioners, researchers, patient advocates and others, responding to the challenge of making the vast amounts of evidence generated through research useful for informing decisions about health. " To find out more about meta-analysis and Cochrane reviews please go to}, - file = {/Users/fabio/Zotero/storage/ZSLKC4BL/m-api-3ce8e069-5753-a125-7550-53d9425d71dc.pdf} -} - -@article{Zvolska2019, - title = {How Do Sharing Organisations Create and Disrupt Institutions? {{Towards}} a Framework for Institutional Work in the Sharing Economy}, - author = {Zvolska, Lucie and Voytenko Palgan, Yuliya and Mont, Oksana}, - year = {2019}, - month = may, - journal = {Journal of Cleaner Production}, - volume = {219}, - pages = {667--676}, - issn = {09596526}, - doi = {10.1016/j.jclepro.2019.02.057} -} - -@article{Zwicker2020, - title = {Applying an Attitude Network Approach to Consumer Behaviour towards Plastic}, - author = {Zwicker, Maria V. and Nohlen, Hannah U. and Dalege, Jonas and Gruter, Gert Jan M. and {van Harreveld}, Frenk}, - year = {2020}, - month = jun, - journal = {Journal of Environmental Psychology}, - volume = {69}, - publisher = {{Academic Press}}, - issn = {15229610}, - doi = {10.1016/j.jenvp.2020.101433}, - urldate = {2020-05-23}, - abstract = {In a time of rapid climate change, understanding what may encourage sustainable consumer behaviour is a vital but difficult challenge. Using an attitude network approach, we investigated which associations people have towards conventional and bio-based plastic in order to develop an empirically-based approach to initiate attitude- and behaviour change. With a qualitative study (N = 97), we distilled 25 evaluative reactions (i.e. beliefs, emotions, and behaviours) that encompass people's attitudes towards using (bio-based) plastic. These reactions were used to create a new scale, which was subsequently tested among 508 online participants. The resulting data was then used to build a network displaying relationships between participants' evaluative reactions regarding plastic use. Analyses of this network indicated that guilt was most strongly connected to people's willingness to pay more for bio-based plastic products. Based on this, we conducted another study (N = 285) in which we experimentally manipulated guilt (general guilt, personal guilt, and control condition) to determine its effects on people's willingness to pay for a sustainable cause. Results indicate that manipulating guilt can lead participants to donate more to a sustainable cause. This effect was fully mediated by self-reported guilt. Determining which factors influence consumers to change their buying behaviour towards sustainability is the first step in creating a demand for more sustainable products amongst the public and investors.}, - keywords = {Attitude networks,Behavioural change,Climate change,Guilt,Plastic,Pro-environmental behaviour}, - file = {/Users/fabio/Zotero/storage/9648UFIZ/full-text.pdf} -} - -@article{Zysset2016, - title = {European {{Society}} of {{Biomechanics S}}.{{M}}. {{Perren Award}} 2016: {{A}} Statistical Damage Model for Bone Tissue Based on Distinct Compressive and Tensile Cracks}, - author = {Zysset, Philippe K. and Schwiedrzik, Jakob and Wolfram, Uwe}, - year = {2016}, - journal = {Journal of Biomechanics}, - volume = {49}, - number = {15}, - pages = {3616--3625}, - publisher = {{Elsevier}}, - issn = {18732380}, - doi = {10.1016/j.jbiomech.2016.09.045}, - abstract = {Osteoporosis leads to bone fragility and represents a major health problem in our aging societies. Bone is a quasi-brittle hierarchical composite that exhibits damage with distinct crack morphologies in compression and tension when overloaded. A recent study reported the complex damage response of bovine compact bone under four different cyclic overloading experiments combining compression and tension. The aim of the present work is to propose a mechanistic model by which cracking bone accumulates residual strain and reduces elastic modulus in distinct compressive and tensile overloading modes. A simple rheological unit of bone with two types of cracks is formulated in the framework of continuum damage mechanics. A statistics of these rheological units is then assembled in parallel to compute the response of a macroscopic bone sample in which compressive and tensile cracks are opened, closed or propagated towards failure. The resulting constitutive model reproduces the key macroscopic features of bone tissue damage and delivers an excellent agreement with the four cyclic overloading experiments. The remarkable predictions of the model support the presence of (1) friction between the crack surfaces producing hystereses, (2) an incomplete closure of cracks leading to residual strains, (3) a bridging mechanism of collagen fibrils which failure reduces elastic modulus, and (4) two distinct classes of cracks where compressive cracks have a strong influence on tensile damage and tensile cracks have a limited impact on compressive damage. This work is expected to help improve our understanding of the bone damage mechanisms contributing to skeletal fragility and to foster a proper generalization of this damage behavior in 3D for computational analysis of bone and bone-implant systems.}, - keywords = {Bone,Constitutive model,Damage,Micro-cracks,Residual strain,Rheological model,Strength}, - file = {/Users/fabio/Zotero/storage/JTB7PISM/European Society of Biomechanics S.M. Perren Award 2016- A statistical damage model for bone tissue based on distinct compressive and tensile cracks.pdf} + isbn = {0140-9174 U6 - ctx\_ver=Z39.88-2004\&ctx\_enc=info\%3Aofi\%2Fenc\%3AUTF-8\&rfr\_id=info:sid/summon.serialssolutions.com\&rft\_val\_fmt=info:ofi/fmt:kev:mtx:journal\&rft.genre=article\&rft.atitle=Conducting+a+literature+review\&rft.jtitle=Management+Research+News\&rft.au=Frances+Slack\&rft.au=Jennifer+Rowley\&rft.date=2004-01-01\&rft.pub=Emerald+Group+Publishing+Limited\&rft.issn=0140-9174\&rft.volume=27\&rft.issue=6\&rft.spage=31\&rft.epage=39\&rft\_id=info:doi/10.1108\%2F01409170410784185\&rft.externalDBID=n\%2Fa\&rft.exte}, + pmid = {1532013}, + file = {/Users/fabio/Zotero/storage/9ZHT4GIZ/m-api-2474676e-1109-febb-459a-858635ac2897.pdf} } diff --git a/docs/CM/CM3.html b/docs/CM/CM3.html index 47f7849..8697107 100644 --- a/docs/CM/CM3.html +++ b/docs/CM/CM3.html @@ -20,7 +20,26 @@ margin: 0 0.8em 0.2em -1em; /* quarto-specific, see https://github.com/quarto-dev/quarto-cli/issues/4556 */ vertical-align: middle; } - +/* CSS for citations */ +div.csl-bib-body { } +div.csl-entry { + clear: both; +} +.hanging-indent div.csl-entry { + margin-left:2em; + text-indent:-2em; +} +div.csl-left-margin { + min-width:2em; + float:left; +} +div.csl-right-inline { + margin-left:2em; + padding-left:1em; +} +div.csl-indent { + margin-left: 2em; +} @@ -83,7 +102,7 @@
CLIP @@ -229,11 +248,21 @@

3 Idé

4 Bibliographie

+

this is a cutation (Roux-Marchand et al. 2020; Rowley and Stack 2004)

+

(Bustamante2015?)

+
- Back to top + Back to top

References

+
+Roux-Marchand, Thibaut, Fabio Cruz, Laurent Dupont, Mauricio Camargo, and Ferney Osorio. 2020. “Connecting the Strategic Intent of Innovation Labs and Projects: The Case of the Green Fablab.” In 2020 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), 1–10. IEEE. https://doi.org/10.1109/ICE/ITMC49519.2020.9198320. +
+
+Rowley, Jennifer, and Frances Stack. 2004. “Conducting a Literature Review.” Management Research News 27 (6): 31–39. https://doi.org/10.1108/01409170410784185. +
+