[try to] Unify imports #402
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
hopefully this makes py2 runnable again
Codecov Report
@@ Coverage Diff @@
## development #402 +/- ##
===============================================
- Coverage 56.55% 56.54% -0.02%
===============================================
Files 43 43
Lines 7796 7798 +2
Branches 1741 1741
===============================================
Hits 4409 4409
- Misses 3052 3054 +2
Partials 335 335
Continue to review full report at Codecov.
|
ebroecker
added a commit
that referenced
this pull request
Nov 8, 2019
* include LICENSE in source distribution (#365) * [arxml]: rx/tx typo fix * annotate and fix codestyle dbc (#369) * Always use Signal.is_little_endian as bool #326 (#371) * Add coding, remove #!python where inappropriate (#370) * annotation cleanup ticket #323 (#372) * Update cli doc (inspired by #361) (#373) * fix: xls is using the wrong number for arbitration id (#377) * add outputformat for Scapy (#378) * fix special char handling in scapy exporter * Dump factor, offset, min, max as float. Load as numeric (#380) * added --jsonNativeTypes as cli option * [arxml]: merge container PDU and Secured PDU support (#384) * [arxml]: support for containers * [arxml]: create signalgroups for containers * [arxml]: support secured pdus (#383) * fix for wrong default ArbitrationId handling (#386) * fix for #381 wrong default ArbitrationId handling * optional ignoring failures durig character encoding #375 (#388) * fix for #238 (j1939 Frame setters might raise TypeError) (#389) * move j1939 (pgn, prio, source) handling direct to arbitration-id class (fixes #238) * [arxml]: #385 // Arxml Container support and ARXML refactoring (#390) * [json] fix multiplex reading issue (#136) * [arxml]: refactoring, DLC for canFD support canmatrix.Frame.fit_dlc now fits to next correct dlc value, DBC export reniced for candb++ (#385) * [arxml]: refactoring and better type handling #368 * [dbc]: fix #242. J1939 and FD Frames in dbc * [xlsx]: fixes #240 (signal init value in excel template) * [xlsx] feature for for #288 (#393) separate lines for values * switch from optparse to click (#236) (#394) * add Basic cli tests (#395) * Annotation cleanup #323 (#396) * Remove cm prefix (#236) (#399) * add muxing support to scapy output; merge PR #398 also (#400) * [try to] Unify imports (#402) unify imports (#236) * [wireshark] dump/export wireshark lua can subdissector (#404) * add cannelloni dissector for wireshark * cycle_time as generic signal and frame attribute (#405) * implement cycle_time as generic signal and frame attribute / remove Gen[Msg/Sig]cycle from attributes #146 * use effective frame cycle time for export use gcd of singnal-cycletimes for calculating effective cycle time * [dbc] Iss407: Signal Comments with space bevore semicolon broken import (#409) * [dbc] fix for issue #407 Signal Comments with space bevore semicolon broken import * make initial value to a native attribute of Signal class (#408) * [dbf] exended ids corrected * [dbc] optional allow multiple singals with same name in frame #411 (#412) * Fix setup.py for console_scripts (#417) * [dbc] Iss413: fix comment reading with whitespaces in front of ; (#416) * fix for iss #414, keeps defines in dbc: this keeps defines from dbc in matrix object, even if native attribute exists. * convert: selective rx/tx ecu extraction issue #421 (#422) * [arxml] can_fd info (potentional fix for #410) (#418) * add baudrate attributes * Auto deploy (#420) * add auto deploy for tags on master
ebroecker
added a commit
that referenced
this pull request
Jan 11, 2022
* include LICENSE in source distribution (#365) * arxml: rx/tx typo fix fix for #366 * annotate and fix codestyle dbc (#369) * Always use Signal.is_little_endian as bool #326 (#371) * Add coding, remove #!python where inappropriate (#370) * annotation cleanup ticket #323 (#372) * Update cli doc (inspired by #361) (#373) * fix: xls is using the wrong number for arbitration id (#377) * add outputformat for Scapy (#378) * add output format for scapy * fix special char handling in scapy exporter * add unit test simplify get_fmt * Dump factor, offset, min, max as float. Load as numeric (#380) * Dump factor, offset, min, max as float. Load as numeric * fixed tests * fixed tests * added --jsonNativeTypes as cli option * review remarks * ARXML: merge container PDU and Secured PDU support (#384) * #381 support for containers * #381 create signalgroups for containers * #382 support secured pdus) (#383) * add unittests for #363 and #382 * Iss381 - fix for #381 - wrong default ArbitrationId handling (#386) * fix for #381 wrong default ArbitrationId handling * support for Scapy input file (#387) * add output format for scapy * optional ignoring failures durig character encoding #375 (#388) * fix for #238 (j1939 Frame setters might raise TypeError) (#389) move j1939 (pgn, prio, source) handling direct to arbitration-id class (fixes #238) * Iss385 // Arxml Container support and ARXML refactoring (#390) ARXML updates: * fix for #385 * json fix multiplex reading issue (#136) * ARXML refactoring, DLC for canFD support canmatrix.Frame.fit_dlc now fits to next correct dlc value, DBC export reniced for candb++ (#385) * add test for fit_dlc * arxml refactoring and better type handling #368 * improvement for #242 * DBC: fix #242. J1939 and FD Frames in dbc candb seems to be queasy about the order of the VFrameFormat attribute definition. This Patch seems to generate a dbc, which can contain can_fd AND J1939-frames. * XLSX fixes (#392) XLSX: fixes #240 (signal init value in excel template) XLSX: fixes #367 (2.) * fix for #288 (#393) * switch from optparse to click (#236) (#394) * [WIP] add Basic cli tests (#395) * add tests for global, manipulation and filter swithces of cli.convert * add basic cli test for cli.compare * fix some bugs, which were found by these tests * Annotation cleanup #323 (#396) * Remove cm prefix (#236) (#399) Thanks * add muxing support to scapy output; merge PR #398 also (#400) * [try to] Unify imports (#402) * unify imports (#236) * [WIP] dump/export wireshark lua can subdissector (#404) * add basic wireshark dissector creator creastes lua script for dissecting can messages * add cannelloni dissector for wireshark * add some doc for scapy and wireshark usage * [WIP] cycle_time as generic signal and frame attribute (#405) * implement cycle_time as generic signal and frame attribute / remove Gen[Msg/Sig]cycle from attributes #146 * use effective frame cycle time for export use gcd of singnal-cycletimes for calculating effective cycle time This removes one (of many) dbc specific parts from canmatrix and other formats * Iss407: [dbc] Signal Comments with space bevore semicolon broken import (#409) * fix for issue #407 [dbc] Signal Comments with space bevore semicolon broken import * make initial value to a native attribute of Signal class (#408) * make initial value to a native attribute of Signal class * [dbf] exended ids corrected * optionally allow multiple singals with same name in frame #411 (#412) * Fix setup.py for console_scripts (#417) * [WIP] [dbc] Iss413: fix comment reading with whitespaces in front of ; (#416) * optionally allow multiple singals with same name in frame #411 * fixes #413 (space before semicolon mulit line comment) * fix for iss #414, keeps defines in dbc: this keeps defines from dbc in matrix object, even if native attribute exists. * convert: selective rx/tx ecu extraction issue #421 (#422) * [WIP] [ARXML] can_fd info (potentional fix for #410) (#418) * potentional fix for #410 * [ARXML] can-fd recogintion * add baudrate attributes * [WIP] Auto deploy (#420) * add auto deploy for tags on master * add submodules doc * update doc to make start_bit more clear in documentation #424 * [dbc] fix dbc issues (#431) * fix dbc export for empty matrix * copy_frame handles default values now (fix #430) * fix copy_frame * fix for issue #436 (#439) * [convert] add delete_obsolete_ecus (fix for #434) (#438) * [copy] Iss430 better attribute handling (#437) * handling missing default values for defines * add ecu attribute handling #430 * fix for #441 (#442) * fix for #441 jsonAll export option working again * make old test less loud * Fix some bugs in FIBEX export (#445) * Fix FIBEX convertion, Handle duplicate signal name * Repair more click convert parameters (#451) * Repair command line param names for csv, json, xls(x) * update tests * use last supported colorama for pypy3.4 * Fixing issue where we see dictionary attributes change during iteration (#455) * Arxml limits number formats (#457) * add number decoding in arxml for different basis * fix #454 * fix for #460 * fix #460 * Update cli.rst add arxmlExportVersion documentation (#461) * Check for EOF when parsing enums in a .sym file. Fixes #465 (#468) * Check for EOF when parsing enums in a .sym file. Fixes #465 * Fix test to check for different exception in the python2.7 case * Log the exception as well when importing a format failed (#467) * Process the .sym file "Title" field. fixes #469 And Fix Enum dictionary comma splitting (#470) * Implement processing of the Title property of .sym files. * Fix CanMatrix.attribute to return default as documented * Set the default for the "Title" attribute properly * Reimplement the quote_aware_comma_split function to handle spaces between fields * Change the sym parser to use quote_aware_comma_split to split enum value tables. Fixes #462. Add test cases to show that enums are read in correctly from .sym files * fix for #471 (#473) * Fix J1939 PGN getter/setter to use full 18bits. Fixes #474 (#475) * Fix J1939 PGN getter/setter to use full 18bits. Fixes #474 Remove the criteria that PF must be >= 240 for PS field to be set as this seems to be incorrect. (It may be that for some specific case the PS need to not be used, but it isn't documented here and in general the PGN should be all 18 bits) Modifed Tests: test_canmatrix_get_frame_by_pgn() seemed to be using made up data and didn't accound for the DP and EDP fields in expected PGN test_canid_repr() Modified the expected repr value to include the PS field in the PGN. test_canid_parse_values() Modified expected PGN to include the PS field, Moved the list of test_data into parametrized cases on a new test. New Tests: test_frame_j1939_id_from_components() Tests constructing a full 29-bit CAN ID from the Priority, Source, and PGN test_frame_decode_j1939_id() Tests extracting Priority Source and PGN from an Arbiration ID * Add the global desistantion Address 0xFF to the BAM arbitration IDs * Improve the fix, to more explicitly handle the difference between PDU-Format 1 and PDU-Format 2, (where the PF >= 240 comes in). The PGN setter now will now set the arbitration ID to contain the destination address, but when the PGN getter is used it will strip the destination field off. I think that it is unlikely for the PGN setter to be used with PDU-F1 PGN containing a destination. But in the case that it is I think it makes more sense to not throw the destination address field away. * Add enumberations as a field to the json file to store the value tables (#476) Add a test to check that if a json file is read containing enums and then saved and re-read it get the same enum table * Adding changes to allow ArbitrationId classes to be sorted (#466) * Adding comparators to ArbitrationId * Changing default Arbitration ID extended to False * Review based changes Co-authored-by: Syed Raza <[email protected]> * Parse sym types (#479) * Allow parsing of the main .sym signal types : string, raw, char. Add a type_label attribute so that symbol files can be saved back to .sym format without loss of information. Add an is_ascii attribute for symbols Add a check to see if Signal names need Quoting when saving to a .sym file (if they start with a number or contain a space etc.) Add a test which reads in a .sym file containing all signal types and checks that they are all correctly imported and exported. * Allow parsing of the main .sym signal types : string, raw, char. Add a type_label attribute so that symbol files can be saved back to .sym format without loss of information. Add an is_ascii attribute for symbols Add a check to see if Signal names need Quoting when saving to a .sym file (if they start with a number or contain a space etc.) Add a test which reads in a .sym file containing all signal types and checks that they are all correctly imported and exported. * Add fix for "isidentifier" fucntion on python 2.7 * Fix logic to match variable name. (Functionality unchanged) Co-authored-by: Eduard Bröcker <[email protected]> * Fix sym.dump to export the value_table into the {ENUMS} field of the (#481) .sym file. Refactor to remove the use of global variables "enum_dict" and "enums" Add a test which checks that enums in the original .sym file and enums which appear as values on a signal are exported to the .sym file. * Accept types which are in the value table as enum sgnals (#482) * Fix additional case in sym enum export (#486) * Accept types which are in the value table as enum sgnals * Fix previous change to also generate enums from the signal values field when signal is in a multiplexed frame. * [DBF] support j1939 read (#501) Co-authored-by: Broecker <[email protected]> * possible fix for #490 (#503) * add tests for issue #424 (#500) add tests for Motorola forward MSB and Motorola forward LSB start_bit * Iss484 (#502) * [arxml] add some basic support for flexray and ethernet data * extract most of relevant flexray info (#432) not yet integraded - only extracted by now * prove of concept for flexray dump (#432) * starting rework ARXML * add xlsxwriter to test deps * add pyyaml to test-reqs * Update requirements.test.py3.txt * fix so that tests work again * remove py3.4 add py3.8 * disable py34 test - enable py38 test * disable py34 * remove py3.4 * remove py8 warnings * fix dbc for py8 * fix for #484 buggy ARXMLs with no System-Signals referenced * fix ci * fix ci (#504) * fix ci * Iss492 (#505) * integrate fix from #492 * Arxml read baudrate (#452) * Read Baudrate from arxml * Enable reading hex values with prefix 0x * Adaption to pass test with string speed values * Update to read in hex values define with 0x and integers e.g. 0 * Removal of commented line * Explicit conversion to string for logger output Co-authored-by: ForestRupicolous <> Co-authored-by: Eduard Bröcker <[email protected]> * Iss496 (#506) * #496 fix ignore encoding switch * Iss499 (#507) * fixes #499 decode_number now supports floating point value * [WIP] [arxml] add some basic support for flexray and ethernet data (#426) * [arxml] add some basic support for flexray and ethernet data * extract most of relevant flexray info (#432) * starting rework ARXML * fix dbc for py8 * support for container-pdus with "none" type * fix for container id byteorder * fix for secured-ipdus in container * fix for byteorder big endian header_ids of container-i-pdus * once again header_id * Header_id again * fix for missing compu method * make SOME/IP at least work a bixt #283 * interprete OPAQUE as intel * dbc allow '"' in Values * fix container-pdu without header but with offset * arxml: fix for container-ipdus, containing same pdu multiple times * fix enum support for py2.7 * Iss509 (#510) dbf fix for exporting empty matrix * dbf fix for exporting empty matrix * Iss496 (#511) * #496 fix ignore encoding switch * clean encoding error implementation * Master (#514) * remegerge release (#512) * Fix sym mux decode, by always treating mux field as unsigned (#517) * Add a test to show that sym file mux values arent working * Add a fix to always treat MUX values as unsigned signals * Log as warning instead of exception (#519) Logging as exception prints a stack backtrace. Since the modules are optional and listed as extra instead of a required dependency, this should probably be a warning instead of an error/exception. Co-authored-by: Lennart Moltrecht <[email protected]> * src/canmatrix.py: fix nested mux with no values (#527) If a complexly multiplexed signal has a sub-multiplexer with no values, a TypeError is thrown. * add is_fd flag for json output (#532) Co-authored-by: Dennis Röck <[email protected]> * Iss526 (#536) * fix ci * fix ci * fixes #526 * fix for #526escaped quotes * #526 use raw strings for test * Bump lxml from 4.5.2 to 4.6.2 (#539) Bumps [lxml](https://github.com/lxml/lxml) from 4.5.2 to 4.6.2. - [Release notes](https://github.com/lxml/lxml/releases) - [Changelog](https://github.com/lxml/lxml/blob/master/CHANGES.txt) - [Commits](lxml/lxml@lxml-4.5.2...lxml-4.6.2) Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Iss535 (#537) * fix ci * possible fix for issue #535 * Iss522 (#530) * arxml: add reciever information from signals to frames (issue #522) * Fix ci (#542) * fix dbc testcase * remove xlsx read from tests (#541) * basic ldf import * update requirements for ldfparser * first implementation for odx import#544 * start diag frame at byte 1 * odx service muxer * odx zwischenstand * issue #531 Lin Converters add support for LIN-Converters * odx zwischnstand * Revert "odx zwischnstand" This reverts commit f4476de. * Update xls.py (#549) Thanks! * add direct decode function for python can frames (#548) * better mux export hanling in sym * Correctly the result if compare two frame with different ID (#552) When comparing two dbc, the the frame has different ID it should be marked as "changed" frame. * Overall code improvements (#555) * fix: use six.moves instead of future.moves to fix annoying import of top level modules * fix: missing future import + clean up dependencies * fix: __package__ does not exist in Python 2.7 * fix: string decoding issue in Python 2.7 * update tox.ini * fix: install all extras in tox.init * update travis and appveyor config * remove unused requirements files * update tox.ini * remove unwanted line in test.sh * fix: Python version 3.9 not available in AppVeyor yet * fix: only keep minimum requirements for test * improvement dbc to dbf (#556) temporary hot fix for canconvert dbc to dbf * fix issue #547 (#560) DeprecationWarning: The usage of `cmp` is deprecated and will be removed on or after 2021-06-01. Please use `eq` and `order` instead. @attr.s(cmp=False) Signed-off-by: An Nguyen <[email protected]> * fix issue #559 (#561) Signed-off-by: An Nguyen <[email protected]> * fix initial value setting (#566) Thanks Co-authored-by: JAZI Nadhmi <[email protected]> * Set initial_value to physical value (#567) Currently the initial_value is incorrectly set to the signal raw value. * arxml fix (#564) Co-authored-by: Eduard Bröcker <[email protected]> * arxml.py: (#569) optimize find/findall fix ECU transmitter/receivers for clusters rework signals receiers settings Co-authored-by: JAZI Nadhmi <[email protected]> * [arxml]: Use ISignal Name for canmatrix.Signal (#570) Add attributes to Signal for other names Co-authored-by: JAZI Nadhmi <[email protected]> * ARXML Replace ArTree with more simple cache add option to rename Signal from Signal-Attribute * add/update doc * Arxml refactoring (#571) * ARXML Replace ArTree with more simple cache * add option to rename Signal from Signal-Attribute * add/update doc * rework arxml parsing and use Pdu for PDU contained frames (#576) Add a converter from PDU contained to multiplexed frame Add option to handle it in the CLI Update decoder function Co-authored-by: JAZI Nadhmi <[email protected]> * fix convert pdu container (#577) Co-authored-by: JAZI Nadhmi <[email protected]> * Remove prints from the code and add the message to the exception (#578) * remove duplicated pdus (#583) Co-authored-by: JAZI Nadhmi <[email protected]> * Improve multiplexer JSON output (#585) Co-authored-by: Edward Pierzchalski <[email protected]> * Fix typo (#586) * bugfix: to get the signals for a pdu you have to use follow_all_ref instead of follow_ref (#591) Co-authored-by: Markus Konrad <[email protected]> * improve logging output to be able to identify problems faster/better (#592) Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> * fix for issue #596 (#597) cope with signals without receiver Co-authored-by: Eduard Bröcker <[email protected]> * fix for #403 * arxml init value may not decoded just ignore #550 * fixes #572 * arxml helpers * Added option calcSignalMax & recalcSignalMax to calculate max value during converting dbc * Fixed a wrong keypress mistake * Removed float conversion before checking if the signal max is zero * fix PDU container decoding (#605) Co-authored-by: JAZI Nadhmi <[email protected]> * Kankan patch1 (#604) * Added option calcSignalMax & recalcSignalMax to calculate max value during converting dbc * Fixed a wrong keypress mistake * Removed float conversion before checking if the signal max is zero * fix tox and continuous integration (#609) * Fixing Issue#610 :: Custom Signal Attributes are removed due to wrong indent * Kankan patch :: Custom Signal Attributes are removed (#611) * Fix #610 :: Custom Signal Attributes are removed due to wrong indent * #612 Bugfix formats.xls and formats.xlsx missing method parameters (#613) * Update guess_value method in utils.py (#615) add a conversion of 0b and 0x string values into int string representation in the guess_value method initial motivation was to get valid input values for the decimal.Decimal() class since it crashed in the arxml.py file line 1234: 1232 if initvalue is not None and initvalue.text is not None: 1233 initvalue.text = canmatrix.utils.guess_value(initvalue.text) 1234 new_signal.initial_value = float_factory(initvalue.text) * Added deleteFloatingSignals , checkFloatingFrames, checkSignalRange, checkSignalUnit, checkSignalReceiver & checkFloatingSignals * Added J1939 to Extended dbc and vice versa * feat: add support for Python 3.10 (#619) * feat: add support for Python 3.10 * chore: fix appveyor configuration * chore: remove useless commands in appveyor configuration * chore: Python 3.9 and 3.10 only available for Visual Studio 2019 and up in appveyor * arxml: read data related to E2E-protection (#594) * read informations about E2E-Profiles (of I-Signalgroup) into the canmatrix-object * also read informations about E2E-Profiles (of I-Signalgroup) into the canmatrix-object if a Container-PDU is processed Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> Co-authored-by: Daniel Hrisca <[email protected]> Co-authored-by: Funth0mas <[email protected]> Co-authored-by: Thomas Fritzsche <[email protected]> Co-authored-by: chrisoro <[email protected]> Co-authored-by: Bröcker <[email protected]> Co-authored-by: Kyle Altendorf <[email protected]> Co-authored-by: akaanich-technica <[email protected]> Co-authored-by: Syed <[email protected]> Co-authored-by: Seneda <[email protected]> Co-authored-by: Ulf Rüegg <[email protected]> Co-authored-by: Broecker <[email protected]> Co-authored-by: Martin Korinek <[email protected]> Co-authored-by: Leo <[email protected]> Co-authored-by: Lennart Moltrecht <[email protected]> Co-authored-by: Ryan Rowe <[email protected]> Co-authored-by: Dennis <[email protected]> Co-authored-by: Dennis Röck <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Cesare12 <[email protected]> Co-authored-by: Moris Yun <[email protected]> Co-authored-by: Darkin <[email protected]> Co-authored-by: jazi007 <[email protected]> Co-authored-by: pierreluctg <[email protected]> Co-authored-by: L X <[email protected]> Co-authored-by: JAZI Nadhmi <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Ajinkya Pasalkar <[email protected]> Co-authored-by: tainnok <[email protected]> Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> Co-authored-by: Kankan Sarkar <[email protected]> Co-authored-by: Arcola-Kankan <[email protected]> Co-authored-by: AlexDLSy <[email protected]> Co-authored-by: tobiasandorfer <[email protected]>
ebroecker
added a commit
that referenced
this pull request
Jan 11, 2022
* include LICENSE in source distribution (#365) * arxml: rx/tx typo fix fix for #366 * annotate and fix codestyle dbc (#369) * Always use Signal.is_little_endian as bool #326 (#371) * Add coding, remove #!python where inappropriate (#370) * annotation cleanup ticket #323 (#372) * Update cli doc (inspired by #361) (#373) * fix: xls is using the wrong number for arbitration id (#377) * add outputformat for Scapy (#378) * add output format for scapy * fix special char handling in scapy exporter * add unit test simplify get_fmt * Dump factor, offset, min, max as float. Load as numeric (#380) * Dump factor, offset, min, max as float. Load as numeric * fixed tests * fixed tests * added --jsonNativeTypes as cli option * review remarks * ARXML: merge container PDU and Secured PDU support (#384) * #381 support for containers * #381 create signalgroups for containers * #382 support secured pdus) (#383) * add unittests for #363 and #382 * Iss381 - fix for #381 - wrong default ArbitrationId handling (#386) * fix for #381 wrong default ArbitrationId handling * support for Scapy input file (#387) * add output format for scapy * optional ignoring failures durig character encoding #375 (#388) * fix for #238 (j1939 Frame setters might raise TypeError) (#389) move j1939 (pgn, prio, source) handling direct to arbitration-id class (fixes #238) * Iss385 // Arxml Container support and ARXML refactoring (#390) ARXML updates: * fix for #385 * json fix multiplex reading issue (#136) * ARXML refactoring, DLC for canFD support canmatrix.Frame.fit_dlc now fits to next correct dlc value, DBC export reniced for candb++ (#385) * add test for fit_dlc * arxml refactoring and better type handling #368 * improvement for #242 * DBC: fix #242. J1939 and FD Frames in dbc candb seems to be queasy about the order of the VFrameFormat attribute definition. This Patch seems to generate a dbc, which can contain can_fd AND J1939-frames. * XLSX fixes (#392) XLSX: fixes #240 (signal init value in excel template) XLSX: fixes #367 (2.) * fix for #288 (#393) * switch from optparse to click (#236) (#394) * [WIP] add Basic cli tests (#395) * add tests for global, manipulation and filter swithces of cli.convert * add basic cli test for cli.compare * fix some bugs, which were found by these tests * Annotation cleanup #323 (#396) * Remove cm prefix (#236) (#399) Thanks * add muxing support to scapy output; merge PR #398 also (#400) * [try to] Unify imports (#402) * unify imports (#236) * [WIP] dump/export wireshark lua can subdissector (#404) * add basic wireshark dissector creator creastes lua script for dissecting can messages * add cannelloni dissector for wireshark * add some doc for scapy and wireshark usage * [WIP] cycle_time as generic signal and frame attribute (#405) * implement cycle_time as generic signal and frame attribute / remove Gen[Msg/Sig]cycle from attributes #146 * use effective frame cycle time for export use gcd of singnal-cycletimes for calculating effective cycle time This removes one (of many) dbc specific parts from canmatrix and other formats * Iss407: [dbc] Signal Comments with space bevore semicolon broken import (#409) * fix for issue #407 [dbc] Signal Comments with space bevore semicolon broken import * make initial value to a native attribute of Signal class (#408) * make initial value to a native attribute of Signal class * [dbf] exended ids corrected * optionally allow multiple singals with same name in frame #411 (#412) * Fix setup.py for console_scripts (#417) * [WIP] [dbc] Iss413: fix comment reading with whitespaces in front of ; (#416) * optionally allow multiple singals with same name in frame #411 * fixes #413 (space before semicolon mulit line comment) * fix for iss #414, keeps defines in dbc: this keeps defines from dbc in matrix object, even if native attribute exists. * convert: selective rx/tx ecu extraction issue #421 (#422) * [WIP] [ARXML] can_fd info (potentional fix for #410) (#418) * potentional fix for #410 * [ARXML] can-fd recogintion * add baudrate attributes * [WIP] Auto deploy (#420) * add auto deploy for tags on master * add submodules doc * update doc to make start_bit more clear in documentation #424 * [dbc] fix dbc issues (#431) * fix dbc export for empty matrix * copy_frame handles default values now (fix #430) * fix copy_frame * fix for issue #436 (#439) * [convert] add delete_obsolete_ecus (fix for #434) (#438) * [copy] Iss430 better attribute handling (#437) * handling missing default values for defines * add ecu attribute handling #430 * fix for #441 (#442) * fix for #441 jsonAll export option working again * make old test less loud * Fix some bugs in FIBEX export (#445) * Fix FIBEX convertion, Handle duplicate signal name * Repair more click convert parameters (#451) * Repair command line param names for csv, json, xls(x) * update tests * use last supported colorama for pypy3.4 * Fixing issue where we see dictionary attributes change during iteration (#455) * Arxml limits number formats (#457) * add number decoding in arxml for different basis * fix #454 * fix for #460 * fix #460 * Update cli.rst add arxmlExportVersion documentation (#461) * Check for EOF when parsing enums in a .sym file. Fixes #465 (#468) * Check for EOF when parsing enums in a .sym file. Fixes #465 * Fix test to check for different exception in the python2.7 case * Log the exception as well when importing a format failed (#467) * Process the .sym file "Title" field. fixes #469 And Fix Enum dictionary comma splitting (#470) * Implement processing of the Title property of .sym files. * Fix CanMatrix.attribute to return default as documented * Set the default for the "Title" attribute properly * Reimplement the quote_aware_comma_split function to handle spaces between fields * Change the sym parser to use quote_aware_comma_split to split enum value tables. Fixes #462. Add test cases to show that enums are read in correctly from .sym files * fix for #471 (#473) * Fix J1939 PGN getter/setter to use full 18bits. Fixes #474 (#475) * Fix J1939 PGN getter/setter to use full 18bits. Fixes #474 Remove the criteria that PF must be >= 240 for PS field to be set as this seems to be incorrect. (It may be that for some specific case the PS need to not be used, but it isn't documented here and in general the PGN should be all 18 bits) Modifed Tests: test_canmatrix_get_frame_by_pgn() seemed to be using made up data and didn't accound for the DP and EDP fields in expected PGN test_canid_repr() Modified the expected repr value to include the PS field in the PGN. test_canid_parse_values() Modified expected PGN to include the PS field, Moved the list of test_data into parametrized cases on a new test. New Tests: test_frame_j1939_id_from_components() Tests constructing a full 29-bit CAN ID from the Priority, Source, and PGN test_frame_decode_j1939_id() Tests extracting Priority Source and PGN from an Arbiration ID * Add the global desistantion Address 0xFF to the BAM arbitration IDs * Improve the fix, to more explicitly handle the difference between PDU-Format 1 and PDU-Format 2, (where the PF >= 240 comes in). The PGN setter now will now set the arbitration ID to contain the destination address, but when the PGN getter is used it will strip the destination field off. I think that it is unlikely for the PGN setter to be used with PDU-F1 PGN containing a destination. But in the case that it is I think it makes more sense to not throw the destination address field away. * Add enumberations as a field to the json file to store the value tables (#476) Add a test to check that if a json file is read containing enums and then saved and re-read it get the same enum table * Adding changes to allow ArbitrationId classes to be sorted (#466) * Adding comparators to ArbitrationId * Changing default Arbitration ID extended to False * Review based changes Co-authored-by: Syed Raza <[email protected]> * Parse sym types (#479) * Allow parsing of the main .sym signal types : string, raw, char. Add a type_label attribute so that symbol files can be saved back to .sym format without loss of information. Add an is_ascii attribute for symbols Add a check to see if Signal names need Quoting when saving to a .sym file (if they start with a number or contain a space etc.) Add a test which reads in a .sym file containing all signal types and checks that they are all correctly imported and exported. * Allow parsing of the main .sym signal types : string, raw, char. Add a type_label attribute so that symbol files can be saved back to .sym format without loss of information. Add an is_ascii attribute for symbols Add a check to see if Signal names need Quoting when saving to a .sym file (if they start with a number or contain a space etc.) Add a test which reads in a .sym file containing all signal types and checks that they are all correctly imported and exported. * Add fix for "isidentifier" fucntion on python 2.7 * Fix logic to match variable name. (Functionality unchanged) Co-authored-by: Eduard Bröcker <[email protected]> * Fix sym.dump to export the value_table into the {ENUMS} field of the (#481) .sym file. Refactor to remove the use of global variables "enum_dict" and "enums" Add a test which checks that enums in the original .sym file and enums which appear as values on a signal are exported to the .sym file. * Accept types which are in the value table as enum sgnals (#482) * Fix additional case in sym enum export (#486) * Accept types which are in the value table as enum sgnals * Fix previous change to also generate enums from the signal values field when signal is in a multiplexed frame. * [DBF] support j1939 read (#501) Co-authored-by: Broecker <[email protected]> * possible fix for #490 (#503) * add tests for issue #424 (#500) add tests for Motorola forward MSB and Motorola forward LSB start_bit * Iss484 (#502) * [arxml] add some basic support for flexray and ethernet data * extract most of relevant flexray info (#432) not yet integraded - only extracted by now * prove of concept for flexray dump (#432) * starting rework ARXML * add xlsxwriter to test deps * add pyyaml to test-reqs * Update requirements.test.py3.txt * fix so that tests work again * remove py3.4 add py3.8 * disable py34 test - enable py38 test * disable py34 * remove py3.4 * remove py8 warnings * fix dbc for py8 * fix for #484 buggy ARXMLs with no System-Signals referenced * fix ci * fix ci (#504) * fix ci * Iss492 (#505) * integrate fix from #492 * Arxml read baudrate (#452) * Read Baudrate from arxml * Enable reading hex values with prefix 0x * Adaption to pass test with string speed values * Update to read in hex values define with 0x and integers e.g. 0 * Removal of commented line * Explicit conversion to string for logger output Co-authored-by: ForestRupicolous <> Co-authored-by: Eduard Bröcker <[email protected]> * Iss496 (#506) * #496 fix ignore encoding switch * Iss499 (#507) * fixes #499 decode_number now supports floating point value * [WIP] [arxml] add some basic support for flexray and ethernet data (#426) * [arxml] add some basic support for flexray and ethernet data * extract most of relevant flexray info (#432) * starting rework ARXML * fix dbc for py8 * support for container-pdus with "none" type * fix for container id byteorder * fix for secured-ipdus in container * fix for byteorder big endian header_ids of container-i-pdus * once again header_id * Header_id again * fix for missing compu method * make SOME/IP at least work a bixt #283 * interprete OPAQUE as intel * dbc allow '"' in Values * fix container-pdu without header but with offset * arxml: fix for container-ipdus, containing same pdu multiple times * fix enum support for py2.7 * Iss509 (#510) dbf fix for exporting empty matrix * dbf fix for exporting empty matrix * Iss496 (#511) * #496 fix ignore encoding switch * clean encoding error implementation * Master (#514) * remegerge release (#512) * Fix sym mux decode, by always treating mux field as unsigned (#517) * Add a test to show that sym file mux values arent working * Add a fix to always treat MUX values as unsigned signals * Log as warning instead of exception (#519) Logging as exception prints a stack backtrace. Since the modules are optional and listed as extra instead of a required dependency, this should probably be a warning instead of an error/exception. Co-authored-by: Lennart Moltrecht <[email protected]> * src/canmatrix.py: fix nested mux with no values (#527) If a complexly multiplexed signal has a sub-multiplexer with no values, a TypeError is thrown. * add is_fd flag for json output (#532) Co-authored-by: Dennis Röck <[email protected]> * Iss526 (#536) * fix ci * fix ci * fixes #526 * fix for #526escaped quotes * #526 use raw strings for test * Bump lxml from 4.5.2 to 4.6.2 (#539) Bumps [lxml](https://github.com/lxml/lxml) from 4.5.2 to 4.6.2. - [Release notes](https://github.com/lxml/lxml/releases) - [Changelog](https://github.com/lxml/lxml/blob/master/CHANGES.txt) - [Commits](lxml/lxml@lxml-4.5.2...lxml-4.6.2) Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Iss535 (#537) * fix ci * possible fix for issue #535 * Iss522 (#530) * arxml: add reciever information from signals to frames (issue #522) * Fix ci (#542) * fix dbc testcase * remove xlsx read from tests (#541) * basic ldf import * update requirements for ldfparser * first implementation for odx import#544 * start diag frame at byte 1 * odx service muxer * odx zwischenstand * issue #531 Lin Converters add support for LIN-Converters * odx zwischnstand * Revert "odx zwischnstand" This reverts commit f4476de. * Update xls.py (#549) Thanks! * add direct decode function for python can frames (#548) * better mux export hanling in sym * Correctly the result if compare two frame with different ID (#552) When comparing two dbc, the the frame has different ID it should be marked as "changed" frame. * Overall code improvements (#555) * fix: use six.moves instead of future.moves to fix annoying import of top level modules * fix: missing future import + clean up dependencies * fix: __package__ does not exist in Python 2.7 * fix: string decoding issue in Python 2.7 * update tox.ini * fix: install all extras in tox.init * update travis and appveyor config * remove unused requirements files * update tox.ini * remove unwanted line in test.sh * fix: Python version 3.9 not available in AppVeyor yet * fix: only keep minimum requirements for test * improvement dbc to dbf (#556) temporary hot fix for canconvert dbc to dbf * fix issue #547 (#560) DeprecationWarning: The usage of `cmp` is deprecated and will be removed on or after 2021-06-01. Please use `eq` and `order` instead. @attr.s(cmp=False) Signed-off-by: An Nguyen <[email protected]> * fix issue #559 (#561) Signed-off-by: An Nguyen <[email protected]> * fix initial value setting (#566) Thanks Co-authored-by: JAZI Nadhmi <[email protected]> * Set initial_value to physical value (#567) Currently the initial_value is incorrectly set to the signal raw value. * arxml fix (#564) Co-authored-by: Eduard Bröcker <[email protected]> * arxml.py: (#569) optimize find/findall fix ECU transmitter/receivers for clusters rework signals receiers settings Co-authored-by: JAZI Nadhmi <[email protected]> * [arxml]: Use ISignal Name for canmatrix.Signal (#570) Add attributes to Signal for other names Co-authored-by: JAZI Nadhmi <[email protected]> * ARXML Replace ArTree with more simple cache add option to rename Signal from Signal-Attribute * add/update doc * Arxml refactoring (#571) * ARXML Replace ArTree with more simple cache * add option to rename Signal from Signal-Attribute * add/update doc * rework arxml parsing and use Pdu for PDU contained frames (#576) Add a converter from PDU contained to multiplexed frame Add option to handle it in the CLI Update decoder function Co-authored-by: JAZI Nadhmi <[email protected]> * fix convert pdu container (#577) Co-authored-by: JAZI Nadhmi <[email protected]> * Remove prints from the code and add the message to the exception (#578) * remove duplicated pdus (#583) Co-authored-by: JAZI Nadhmi <[email protected]> * Improve multiplexer JSON output (#585) Co-authored-by: Edward Pierzchalski <[email protected]> * Fix typo (#586) * bugfix: to get the signals for a pdu you have to use follow_all_ref instead of follow_ref (#591) Co-authored-by: Markus Konrad <[email protected]> * improve logging output to be able to identify problems faster/better (#592) Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> * fix for issue #596 (#597) cope with signals without receiver Co-authored-by: Eduard Bröcker <[email protected]> * fix for #403 * arxml init value may not decoded just ignore #550 * fixes #572 * arxml helpers * Added option calcSignalMax & recalcSignalMax to calculate max value during converting dbc * Fixed a wrong keypress mistake * Removed float conversion before checking if the signal max is zero * fix PDU container decoding (#605) Co-authored-by: JAZI Nadhmi <[email protected]> * Kankan patch1 (#604) * Added option calcSignalMax & recalcSignalMax to calculate max value during converting dbc * Fixed a wrong keypress mistake * Removed float conversion before checking if the signal max is zero * fix tox and continuous integration (#609) * Fixing Issue#610 :: Custom Signal Attributes are removed due to wrong indent * Kankan patch :: Custom Signal Attributes are removed (#611) * Fix #610 :: Custom Signal Attributes are removed due to wrong indent * #612 Bugfix formats.xls and formats.xlsx missing method parameters (#613) * Update guess_value method in utils.py (#615) add a conversion of 0b and 0x string values into int string representation in the guess_value method initial motivation was to get valid input values for the decimal.Decimal() class since it crashed in the arxml.py file line 1234: 1232 if initvalue is not None and initvalue.text is not None: 1233 initvalue.text = canmatrix.utils.guess_value(initvalue.text) 1234 new_signal.initial_value = float_factory(initvalue.text) * Added deleteFloatingSignals , checkFloatingFrames, checkSignalRange, checkSignalUnit, checkSignalReceiver & checkFloatingSignals * Added J1939 to Extended dbc and vice versa * feat: add support for Python 3.10 (#619) * feat: add support for Python 3.10 * chore: fix appveyor configuration * chore: remove useless commands in appveyor configuration * chore: Python 3.9 and 3.10 only available for Visual Studio 2019 and up in appveyor * arxml: read data related to E2E-protection (#594) * read informations about E2E-Profiles (of I-Signalgroup) into the canmatrix-object * also read informations about E2E-Profiles (of I-Signalgroup) into the canmatrix-object if a Container-PDU is processed Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> Co-authored-by: Daniel Hrisca <[email protected]> Co-authored-by: Funth0mas <[email protected]> Co-authored-by: Thomas Fritzsche <[email protected]> Co-authored-by: chrisoro <[email protected]> Co-authored-by: Bröcker <[email protected]> Co-authored-by: Kyle Altendorf <[email protected]> Co-authored-by: akaanich-technica <[email protected]> Co-authored-by: Syed <[email protected]> Co-authored-by: Seneda <[email protected]> Co-authored-by: Ulf Rüegg <[email protected]> Co-authored-by: Broecker <[email protected]> Co-authored-by: Martin Korinek <[email protected]> Co-authored-by: Leo <[email protected]> Co-authored-by: Lennart Moltrecht <[email protected]> Co-authored-by: Ryan Rowe <[email protected]> Co-authored-by: Dennis <[email protected]> Co-authored-by: Dennis Röck <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Cesare12 <[email protected]> Co-authored-by: Moris Yun <[email protected]> Co-authored-by: Darkin <[email protected]> Co-authored-by: jazi007 <[email protected]> Co-authored-by: pierreluctg <[email protected]> Co-authored-by: L X <[email protected]> Co-authored-by: JAZI Nadhmi <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Ajinkya Pasalkar <[email protected]> Co-authored-by: tainnok <[email protected]> Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> Co-authored-by: Kankan Sarkar <[email protected]> Co-authored-by: Arcola-Kankan <[email protected]> Co-authored-by: AlexDLSy <[email protected]> Co-authored-by: tobiasandorfer <[email protected]> Co-authored-by: Daniel Hrisca <[email protected]> Co-authored-by: Funth0mas <[email protected]> Co-authored-by: Thomas Fritzsche <[email protected]> Co-authored-by: chrisoro <[email protected]> Co-authored-by: Bröcker <[email protected]> Co-authored-by: Kyle Altendorf <[email protected]> Co-authored-by: akaanich-technica <[email protected]> Co-authored-by: Syed <[email protected]> Co-authored-by: Seneda <[email protected]> Co-authored-by: Ulf Rüegg <[email protected]> Co-authored-by: Broecker <[email protected]> Co-authored-by: Martin Korinek <[email protected]> Co-authored-by: Leo <[email protected]> Co-authored-by: Lennart Moltrecht <[email protected]> Co-authored-by: Ryan Rowe <[email protected]> Co-authored-by: Dennis <[email protected]> Co-authored-by: Dennis Röck <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Cesare12 <[email protected]> Co-authored-by: Moris Yun <[email protected]> Co-authored-by: Darkin <[email protected]> Co-authored-by: jazi007 <[email protected]> Co-authored-by: pierreluctg <[email protected]> Co-authored-by: L X <[email protected]> Co-authored-by: JAZI Nadhmi <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Ajinkya Pasalkar <[email protected]> Co-authored-by: tainnok <[email protected]> Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> Co-authored-by: Kankan Sarkar <[email protected]> Co-authored-by: Arcola-Kankan <[email protected]> Co-authored-by: AlexDLSy <[email protected]> Co-authored-by: tobiasandorfer <[email protected]>
ebroecker
added a commit
that referenced
this pull request
Mar 23, 2022
* merge for release 0.9.4 (#621) * include LICENSE in source distribution (#365) * arxml: rx/tx typo fix fix for #366 * annotate and fix codestyle dbc (#369) * Always use Signal.is_little_endian as bool #326 (#371) * Add coding, remove #!python where inappropriate (#370) * annotation cleanup ticket #323 (#372) * Update cli doc (inspired by #361) (#373) * fix: xls is using the wrong number for arbitration id (#377) * add outputformat for Scapy (#378) * add output format for scapy * fix special char handling in scapy exporter * add unit test simplify get_fmt * Dump factor, offset, min, max as float. Load as numeric (#380) * Dump factor, offset, min, max as float. Load as numeric * fixed tests * fixed tests * added --jsonNativeTypes as cli option * review remarks * ARXML: merge container PDU and Secured PDU support (#384) * #381 support for containers * #381 create signalgroups for containers * #382 support secured pdus) (#383) * add unittests for #363 and #382 * Iss381 - fix for #381 - wrong default ArbitrationId handling (#386) * fix for #381 wrong default ArbitrationId handling * support for Scapy input file (#387) * add output format for scapy * optional ignoring failures durig character encoding #375 (#388) * fix for #238 (j1939 Frame setters might raise TypeError) (#389) move j1939 (pgn, prio, source) handling direct to arbitration-id class (fixes #238) * Iss385 // Arxml Container support and ARXML refactoring (#390) ARXML updates: * fix for #385 * json fix multiplex reading issue (#136) * ARXML refactoring, DLC for canFD support canmatrix.Frame.fit_dlc now fits to next correct dlc value, DBC export reniced for candb++ (#385) * add test for fit_dlc * arxml refactoring and better type handling #368 * improvement for #242 * DBC: fix #242. J1939 and FD Frames in dbc candb seems to be queasy about the order of the VFrameFormat attribute definition. This Patch seems to generate a dbc, which can contain can_fd AND J1939-frames. * XLSX fixes (#392) XLSX: fixes #240 (signal init value in excel template) XLSX: fixes #367 (2.) * fix for #288 (#393) * switch from optparse to click (#236) (#394) * [WIP] add Basic cli tests (#395) * add tests for global, manipulation and filter swithces of cli.convert * add basic cli test for cli.compare * fix some bugs, which were found by these tests * Annotation cleanup #323 (#396) * Remove cm prefix (#236) (#399) Thanks * add muxing support to scapy output; merge PR #398 also (#400) * [try to] Unify imports (#402) * unify imports (#236) * [WIP] dump/export wireshark lua can subdissector (#404) * add basic wireshark dissector creator creastes lua script for dissecting can messages * add cannelloni dissector for wireshark * add some doc for scapy and wireshark usage * [WIP] cycle_time as generic signal and frame attribute (#405) * implement cycle_time as generic signal and frame attribute / remove Gen[Msg/Sig]cycle from attributes #146 * use effective frame cycle time for export use gcd of singnal-cycletimes for calculating effective cycle time This removes one (of many) dbc specific parts from canmatrix and other formats * Iss407: [dbc] Signal Comments with space bevore semicolon broken import (#409) * fix for issue #407 [dbc] Signal Comments with space bevore semicolon broken import * make initial value to a native attribute of Signal class (#408) * make initial value to a native attribute of Signal class * [dbf] exended ids corrected * optionally allow multiple singals with same name in frame #411 (#412) * Fix setup.py for console_scripts (#417) * [WIP] [dbc] Iss413: fix comment reading with whitespaces in front of ; (#416) * optionally allow multiple singals with same name in frame #411 * fixes #413 (space before semicolon mulit line comment) * fix for iss #414, keeps defines in dbc: this keeps defines from dbc in matrix object, even if native attribute exists. * convert: selective rx/tx ecu extraction issue #421 (#422) * [WIP] [ARXML] can_fd info (potentional fix for #410) (#418) * potentional fix for #410 * [ARXML] can-fd recogintion * add baudrate attributes * [WIP] Auto deploy (#420) * add auto deploy for tags on master * add submodules doc * update doc to make start_bit more clear in documentation #424 * [dbc] fix dbc issues (#431) * fix dbc export for empty matrix * copy_frame handles default values now (fix #430) * fix copy_frame * fix for issue #436 (#439) * [convert] add delete_obsolete_ecus (fix for #434) (#438) * [copy] Iss430 better attribute handling (#437) * handling missing default values for defines * add ecu attribute handling #430 * fix for #441 (#442) * fix for #441 jsonAll export option working again * make old test less loud * Fix some bugs in FIBEX export (#445) * Fix FIBEX convertion, Handle duplicate signal name * Repair more click convert parameters (#451) * Repair command line param names for csv, json, xls(x) * update tests * use last supported colorama for pypy3.4 * Fixing issue where we see dictionary attributes change during iteration (#455) * Arxml limits number formats (#457) * add number decoding in arxml for different basis * fix #454 * fix for #460 * fix #460 * Update cli.rst add arxmlExportVersion documentation (#461) * Check for EOF when parsing enums in a .sym file. Fixes #465 (#468) * Check for EOF when parsing enums in a .sym file. Fixes #465 * Fix test to check for different exception in the python2.7 case * Log the exception as well when importing a format failed (#467) * Process the .sym file "Title" field. fixes #469 And Fix Enum dictionary comma splitting (#470) * Implement processing of the Title property of .sym files. * Fix CanMatrix.attribute to return default as documented * Set the default for the "Title" attribute properly * Reimplement the quote_aware_comma_split function to handle spaces between fields * Change the sym parser to use quote_aware_comma_split to split enum value tables. Fixes #462. Add test cases to show that enums are read in correctly from .sym files * fix for #471 (#473) * Fix J1939 PGN getter/setter to use full 18bits. Fixes #474 (#475) * Fix J1939 PGN getter/setter to use full 18bits. Fixes #474 Remove the criteria that PF must be >= 240 for PS field to be set as this seems to be incorrect. (It may be that for some specific case the PS need to not be used, but it isn't documented here and in general the PGN should be all 18 bits) Modifed Tests: test_canmatrix_get_frame_by_pgn() seemed to be using made up data and didn't accound for the DP and EDP fields in expected PGN test_canid_repr() Modified the expected repr value to include the PS field in the PGN. test_canid_parse_values() Modified expected PGN to include the PS field, Moved the list of test_data into parametrized cases on a new test. New Tests: test_frame_j1939_id_from_components() Tests constructing a full 29-bit CAN ID from the Priority, Source, and PGN test_frame_decode_j1939_id() Tests extracting Priority Source and PGN from an Arbiration ID * Add the global desistantion Address 0xFF to the BAM arbitration IDs * Improve the fix, to more explicitly handle the difference between PDU-Format 1 and PDU-Format 2, (where the PF >= 240 comes in). The PGN setter now will now set the arbitration ID to contain the destination address, but when the PGN getter is used it will strip the destination field off. I think that it is unlikely for the PGN setter to be used with PDU-F1 PGN containing a destination. But in the case that it is I think it makes more sense to not throw the destination address field away. * Add enumberations as a field to the json file to store the value tables (#476) Add a test to check that if a json file is read containing enums and then saved and re-read it get the same enum table * Adding changes to allow ArbitrationId classes to be sorted (#466) * Adding comparators to ArbitrationId * Changing default Arbitration ID extended to False * Review based changes Co-authored-by: Syed Raza <[email protected]> * Parse sym types (#479) * Allow parsing of the main .sym signal types : string, raw, char. Add a type_label attribute so that symbol files can be saved back to .sym format without loss of information. Add an is_ascii attribute for symbols Add a check to see if Signal names need Quoting when saving to a .sym file (if they start with a number or contain a space etc.) Add a test which reads in a .sym file containing all signal types and checks that they are all correctly imported and exported. * Allow parsing of the main .sym signal types : string, raw, char. Add a type_label attribute so that symbol files can be saved back to .sym format without loss of information. Add an is_ascii attribute for symbols Add a check to see if Signal names need Quoting when saving to a .sym file (if they start with a number or contain a space etc.) Add a test which reads in a .sym file containing all signal types and checks that they are all correctly imported and exported. * Add fix for "isidentifier" fucntion on python 2.7 * Fix logic to match variable name. (Functionality unchanged) Co-authored-by: Eduard Bröcker <[email protected]> * Fix sym.dump to export the value_table into the {ENUMS} field of the (#481) .sym file. Refactor to remove the use of global variables "enum_dict" and "enums" Add a test which checks that enums in the original .sym file and enums which appear as values on a signal are exported to the .sym file. * Accept types which are in the value table as enum sgnals (#482) * Fix additional case in sym enum export (#486) * Accept types which are in the value table as enum sgnals * Fix previous change to also generate enums from the signal values field when signal is in a multiplexed frame. * [DBF] support j1939 read (#501) Co-authored-by: Broecker <[email protected]> * possible fix for #490 (#503) * add tests for issue #424 (#500) add tests for Motorola forward MSB and Motorola forward LSB start_bit * Iss484 (#502) * [arxml] add some basic support for flexray and ethernet data * extract most of relevant flexray info (#432) not yet integraded - only extracted by now * prove of concept for flexray dump (#432) * starting rework ARXML * add xlsxwriter to test deps * add pyyaml to test-reqs * Update requirements.test.py3.txt * fix so that tests work again * remove py3.4 add py3.8 * disable py34 test - enable py38 test * disable py34 * remove py3.4 * remove py8 warnings * fix dbc for py8 * fix for #484 buggy ARXMLs with no System-Signals referenced * fix ci * fix ci (#504) * fix ci * Iss492 (#505) * integrate fix from #492 * Arxml read baudrate (#452) * Read Baudrate from arxml * Enable reading hex values with prefix 0x * Adaption to pass test with string speed values * Update to read in hex values define with 0x and integers e.g. 0 * Removal of commented line * Explicit conversion to string for logger output Co-authored-by: ForestRupicolous <> Co-authored-by: Eduard Bröcker <[email protected]> * Iss496 (#506) * #496 fix ignore encoding switch * Iss499 (#507) * fixes #499 decode_number now supports floating point value * [WIP] [arxml] add some basic support for flexray and ethernet data (#426) * [arxml] add some basic support for flexray and ethernet data * extract most of relevant flexray info (#432) * starting rework ARXML * fix dbc for py8 * support for container-pdus with "none" type * fix for container id byteorder * fix for secured-ipdus in container * fix for byteorder big endian header_ids of container-i-pdus * once again header_id * Header_id again * fix for missing compu method * make SOME/IP at least work a bixt #283 * interprete OPAQUE as intel * dbc allow '"' in Values * fix container-pdu without header but with offset * arxml: fix for container-ipdus, containing same pdu multiple times * fix enum support for py2.7 * Iss509 (#510) dbf fix for exporting empty matrix * dbf fix for exporting empty matrix * Iss496 (#511) * #496 fix ignore encoding switch * clean encoding error implementation * Master (#514) * remegerge release (#512) * Fix sym mux decode, by always treating mux field as unsigned (#517) * Add a test to show that sym file mux values arent working * Add a fix to always treat MUX values as unsigned signals * Log as warning instead of exception (#519) Logging as exception prints a stack backtrace. Since the modules are optional and listed as extra instead of a required dependency, this should probably be a warning instead of an error/exception. Co-authored-by: Lennart Moltrecht <[email protected]> * src/canmatrix.py: fix nested mux with no values (#527) If a complexly multiplexed signal has a sub-multiplexer with no values, a TypeError is thrown. * add is_fd flag for json output (#532) Co-authored-by: Dennis Röck <[email protected]> * Iss526 (#536) * fix ci * fix ci * fixes #526 * fix for #526escaped quotes * #526 use raw strings for test * Bump lxml from 4.5.2 to 4.6.2 (#539) Bumps [lxml](https://github.com/lxml/lxml) from 4.5.2 to 4.6.2. - [Release notes](https://github.com/lxml/lxml/releases) - [Changelog](https://github.com/lxml/lxml/blob/master/CHANGES.txt) - [Commits](lxml/lxml@lxml-4.5.2...lxml-4.6.2) Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Iss535 (#537) * fix ci * possible fix for issue #535 * Iss522 (#530) * arxml: add reciever information from signals to frames (issue #522) * Fix ci (#542) * fix dbc testcase * remove xlsx read from tests (#541) * basic ldf import * update requirements for ldfparser * first implementation for odx import#544 * start diag frame at byte 1 * odx service muxer * odx zwischenstand * issue #531 Lin Converters add support for LIN-Converters * odx zwischnstand * Revert "odx zwischnstand" This reverts commit f4476de. * Update xls.py (#549) Thanks! * add direct decode function for python can frames (#548) * better mux export hanling in sym * Correctly the result if compare two frame with different ID (#552) When comparing two dbc, the the frame has different ID it should be marked as "changed" frame. * Overall code improvements (#555) * fix: use six.moves instead of future.moves to fix annoying import of top level modules * fix: missing future import + clean up dependencies * fix: __package__ does not exist in Python 2.7 * fix: string decoding issue in Python 2.7 * update tox.ini * fix: install all extras in tox.init * update travis and appveyor config * remove unused requirements files * update tox.ini * remove unwanted line in test.sh * fix: Python version 3.9 not available in AppVeyor yet * fix: only keep minimum requirements for test * improvement dbc to dbf (#556) temporary hot fix for canconvert dbc to dbf * fix issue #547 (#560) DeprecationWarning: The usage of `cmp` is deprecated and will be removed on or after 2021-06-01. Please use `eq` and `order` instead. @attr.s(cmp=False) Signed-off-by: An Nguyen <[email protected]> * fix issue #559 (#561) Signed-off-by: An Nguyen <[email protected]> * fix initial value setting (#566) Thanks Co-authored-by: JAZI Nadhmi <[email protected]> * Set initial_value to physical value (#567) Currently the initial_value is incorrectly set to the signal raw value. * arxml fix (#564) Co-authored-by: Eduard Bröcker <[email protected]> * arxml.py: (#569) optimize find/findall fix ECU transmitter/receivers for clusters rework signals receiers settings Co-authored-by: JAZI Nadhmi <[email protected]> * [arxml]: Use ISignal Name for canmatrix.Signal (#570) Add attributes to Signal for other names Co-authored-by: JAZI Nadhmi <[email protected]> * ARXML Replace ArTree with more simple cache add option to rename Signal from Signal-Attribute * add/update doc * Arxml refactoring (#571) * ARXML Replace ArTree with more simple cache * add option to rename Signal from Signal-Attribute * add/update doc * rework arxml parsing and use Pdu for PDU contained frames (#576) Add a converter from PDU contained to multiplexed frame Add option to handle it in the CLI Update decoder function Co-authored-by: JAZI Nadhmi <[email protected]> * fix convert pdu container (#577) Co-authored-by: JAZI Nadhmi <[email protected]> * Remove prints from the code and add the message to the exception (#578) * remove duplicated pdus (#583) Co-authored-by: JAZI Nadhmi <[email protected]> * Improve multiplexer JSON output (#585) Co-authored-by: Edward Pierzchalski <[email protected]> * Fix typo (#586) * bugfix: to get the signals for a pdu you have to use follow_all_ref instead of follow_ref (#591) Co-authored-by: Markus Konrad <[email protected]> * improve logging output to be able to identify problems faster/better (#592) Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> * fix for issue #596 (#597) cope with signals without receiver Co-authored-by: Eduard Bröcker <[email protected]> * fix for #403 * arxml init value may not decoded just ignore #550 * fixes #572 * arxml helpers * Added option calcSignalMax & recalcSignalMax to calculate max value during converting dbc * Fixed a wrong keypress mistake * Removed float conversion before checking if the signal max is zero * fix PDU container decoding (#605) Co-authored-by: JAZI Nadhmi <[email protected]> * Kankan patch1 (#604) * Added option calcSignalMax & recalcSignalMax to calculate max value during converting dbc * Fixed a wrong keypress mistake * Removed float conversion before checking if the signal max is zero * fix tox and continuous integration (#609) * Fixing Issue#610 :: Custom Signal Attributes are removed due to wrong indent * Kankan patch :: Custom Signal Attributes are removed (#611) * Fix #610 :: Custom Signal Attributes are removed due to wrong indent * #612 Bugfix formats.xls and formats.xlsx missing method parameters (#613) * Update guess_value method in utils.py (#615) add a conversion of 0b and 0x string values into int string representation in the guess_value method initial motivation was to get valid input values for the decimal.Decimal() class since it crashed in the arxml.py file line 1234: 1232 if initvalue is not None and initvalue.text is not None: 1233 initvalue.text = canmatrix.utils.guess_value(initvalue.text) 1234 new_signal.initial_value = float_factory(initvalue.text) * Added deleteFloatingSignals , checkFloatingFrames, checkSignalRange, checkSignalUnit, checkSignalReceiver & checkFloatingSignals * Added J1939 to Extended dbc and vice versa * feat: add support for Python 3.10 (#619) * feat: add support for Python 3.10 * chore: fix appveyor configuration * chore: remove useless commands in appveyor configuration * chore: Python 3.9 and 3.10 only available for Visual Studio 2019 and up in appveyor * arxml: read data related to E2E-protection (#594) * read informations about E2E-Profiles (of I-Signalgroup) into the canmatrix-object * also read informations about E2E-Profiles (of I-Signalgroup) into the canmatrix-object if a Container-PDU is processed Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> Co-authored-by: Daniel Hrisca <[email protected]> Co-authored-by: Funth0mas <[email protected]> Co-authored-by: Thomas Fritzsche <[email protected]> Co-authored-by: chrisoro <[email protected]> Co-authored-by: Bröcker <[email protected]> Co-authored-by: Kyle Altendorf <[email protected]> Co-authored-by: akaanich-technica <[email protected]> Co-authored-by: Syed <[email protected]> Co-authored-by: Seneda <[email protected]> Co-authored-by: Ulf Rüegg <[email protected]> Co-authored-by: Broecker <[email protected]> Co-authored-by: Martin Korinek <[email protected]> Co-authored-by: Leo <[email protected]> Co-authored-by: Lennart Moltrecht <[email protected]> Co-authored-by: Ryan Rowe <[email protected]> Co-authored-by: Dennis <[email protected]> Co-authored-by: Dennis Röck <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Cesare12 <[email protected]> Co-authored-by: Moris Yun <[email protected]> Co-authored-by: Darkin <[email protected]> Co-authored-by: jazi007 <[email protected]> Co-authored-by: pierreluctg <[email protected]> Co-authored-by: L X <[email protected]> Co-authored-by: JAZI Nadhmi <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Ajinkya Pasalkar <[email protected]> Co-authored-by: tainnok <[email protected]> Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> Co-authored-by: Kankan Sarkar <[email protected]> Co-authored-by: Arcola-Kankan <[email protected]> Co-authored-by: AlexDLSy <[email protected]> Co-authored-by: tobiasandorfer <[email protected]> * add testcase for Issue #625 * bugfix for #625 * fix is vs. == * attributes are more often strings now Co-authored-by: Daniel Hrisca <[email protected]> Co-authored-by: Funth0mas <[email protected]> Co-authored-by: Thomas Fritzsche <[email protected]> Co-authored-by: chrisoro <[email protected]> Co-authored-by: Bröcker <[email protected]> Co-authored-by: Kyle Altendorf <[email protected]> Co-authored-by: akaanich-technica <[email protected]> Co-authored-by: Syed <[email protected]> Co-authored-by: Seneda <[email protected]> Co-authored-by: Ulf Rüegg <[email protected]> Co-authored-by: Broecker <[email protected]> Co-authored-by: Martin Korinek <[email protected]> Co-authored-by: Leo <[email protected]> Co-authored-by: Lennart Moltrecht <[email protected]> Co-authored-by: Ryan Rowe <[email protected]> Co-authored-by: Dennis <[email protected]> Co-authored-by: Dennis Röck <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Cesare12 <[email protected]> Co-authored-by: Moris Yun <[email protected]> Co-authored-by: Darkin <[email protected]> Co-authored-by: jazi007 <[email protected]> Co-authored-by: pierreluctg <[email protected]> Co-authored-by: L X <[email protected]> Co-authored-by: JAZI Nadhmi <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Edward Pierzchalski <[email protected]> Co-authored-by: Ajinkya Pasalkar <[email protected]> Co-authored-by: tainnok <[email protected]> Co-authored-by: Markus Konrad <[email protected]> Co-authored-by: Eduard Bröcker <[email protected]> Co-authored-by: Kankan Sarkar <[email protected]> Co-authored-by: Arcola-Kankan <[email protected]> Co-authored-by: AlexDLSy <[email protected]> Co-authored-by: tobiasandorfer <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Try to unify imports as described in [WIP] Organizational review #236
Imports from
futureas recommended on python-future pagesRemove
from module import *except of future (builtins)Let see what buildservers say...im not able to run in on py2