cont.c

/**********************************************************************

  cont.c -

  $Author$
  created at: Thu May 23 09:03:43 2007

  Copyright (C) 2007 Koichi Sasada

**********************************************************************/

#include "ruby/internal/config.h"

#ifndef _WIN32
#include <unistd.h>
#include <sys/mman.h>
#endif

// On Solaris, madvise() is NOT declared for SUS (XPG4v2) or later,
// but MADV_* macros are defined when __EXTENSIONS__ is defined.
#ifdef NEED_MADVICE_PROTOTYPE_USING_CADDR_T
#include <sys/types.h>
extern int madvise(caddr_t, size_t, int);
#endif

#include COROUTINE_H

#include "eval_intern.h"
#include "gc.h"
#include "internal.h"
#include "internal/cont.h"
#include "internal/proc.h"
#include "internal/warnings.h"
#include "ruby/fiber/scheduler.h"
#include "mjit.h"
#include "vm_core.h"
#include "id_table.h"
#include "ractor_core.h"

static const int DEBUG = 0;

#define RB_PAGE_SIZE (pagesize)
#define RB_PAGE_MASK (~(RB_PAGE_SIZE - 1))
static long pagesize;

static const rb_data_type_t cont_data_type, fiber_data_type;
static VALUE rb_cContinuation;
static VALUE rb_cFiber;
static VALUE rb_eFiberError;
#ifdef RB_EXPERIMENTAL_FIBER_POOL
static VALUE rb_cFiberPool;
#endif

#define CAPTURE_JUST_VALID_VM_STACK 1

// Defined in `coroutine/$arch/Context.h`:
#ifdef COROUTINE_LIMITED_ADDRESS_SPACE
#define FIBER_POOL_ALLOCATION_FREE
#define FIBER_POOL_INITIAL_SIZE 8
#define FIBER_POOL_ALLOCATION_MAXIMUM_SIZE 32
#else
#define FIBER_POOL_INITIAL_SIZE 32
#define FIBER_POOL_ALLOCATION_MAXIMUM_SIZE 1024
#endif

enum context_type {
    CONTINUATION_CONTEXT = 0,
    FIBER_CONTEXT = 1
};

struct cont_saved_vm_stack {
    VALUE *ptr;
#ifdef CAPTURE_JUST_VALID_VM_STACK
    size_t slen;  /* length of stack (head of ec->vm_stack) */
    size_t clen;  /* length of control frames (tail of ec->vm_stack) */
#endif
};

struct fiber_pool;

// Represents a single stack.
struct fiber_pool_stack {
    // A pointer to the memory allocation (lowest address) for the stack.
    void * base;

    // The current stack pointer, taking into account the direction of the stack.
    void * current;

    // The size of the stack excluding any guard pages.
    size_t size;

    // The available stack capacity w.r.t. the current stack offset.
    size_t available;

    // The pool this stack should be allocated from.
    struct fiber_pool * pool;

    // If the stack is allocated, the allocation it came from.
    struct fiber_pool_allocation * allocation;
};

// A linked list of vacant (unused) stacks.
// This structure is stored in the first page of a stack if it is not in use.
// @sa fiber_pool_vacancy_pointer
struct fiber_pool_vacancy {
    // Details about the vacant stack:
    struct fiber_pool_stack stack;

    // The vacancy linked list.
#ifdef FIBER_POOL_ALLOCATION_FREE
    struct fiber_pool_vacancy * previous;
#endif
    struct fiber_pool_vacancy * next;
};

// Manages singly linked list of mapped regions of memory which contains 1 more more stack:
//
// base = +-------------------------------+-----------------------+  +
//        |VM Stack       |VM Stack       |                       |  |
//        |               |               |                       |  |
//        |               |               |                       |  |
//        +-------------------------------+                       |  |
//        |Machine Stack  |Machine Stack  |                       |  |
//        |               |               |                       |  |
//        |               |               |                       |  |
//        |               |               | .  .  .  .            |  |  size
//        |               |               |                       |  |
//        |               |               |                       |  |
//        |               |               |                       |  |
//        |               |               |                       |  |
//        |               |               |                       |  |
//        +-------------------------------+                       |  |
//        |Guard Page     |Guard Page     |                       |  |
//        +-------------------------------+-----------------------+  v
//
//        +------------------------------------------------------->
//
//                                  count
//
struct fiber_pool_allocation {
    // A pointer to the memory mapped region.
    void * base;

    // The size of the individual stacks.
    size_t size;

    // The stride of individual stacks (including any guard pages or other accounting details).
    size_t stride;

    // The number of stacks that were allocated.
    size_t count;

#ifdef FIBER_POOL_ALLOCATION_FREE
    // The number of stacks used in this allocation.
    size_t used;
#endif

    struct fiber_pool * pool;

    // The allocation linked list.
#ifdef FIBER_POOL_ALLOCATION_FREE
    struct fiber_pool_allocation * previous;
#endif
    struct fiber_pool_allocation * next;
};

// A fiber pool manages vacant stacks to reduce the overhead of creating fibers.
struct fiber_pool {
    // A singly-linked list of allocations which contain 1 or more stacks each.
    struct fiber_pool_allocation * allocations;

    // Provides O(1) stack "allocation":
    struct fiber_pool_vacancy * vacancies;

    // The size of the stack allocations (excluding any guard page).
    size_t size;

    // The total number of stacks that have been allocated in this pool.
    size_t count;

    // The initial number of stacks to allocate.
    size_t initial_count;

    // Whether to madvise(free) the stack or not:
    int free_stacks;

    // The number of stacks that have been used in this pool.
    size_t used;

    // The amount to allocate for the vm_stack:
    size_t vm_stack_size;
};

typedef struct rb_context_struct {
    enum context_type type;
    int argc;
    int kw_splat;
    VALUE self;
    VALUE value;

    struct cont_saved_vm_stack saved_vm_stack;

    struct {
        VALUE *stack;
        VALUE *stack_src;
        size_t stack_size;
    } machine;
    rb_execution_context_t saved_ec;
    rb_jmpbuf_t jmpbuf;
    rb_ensure_entry_t *ensure_array;
    /* Pointer to MJIT info about the continuation.  */
    struct mjit_cont *mjit_cont;
} rb_context_t;


/*
 * Fiber status:
 *    [Fiber.new] ------> FIBER_CREATED
 *                        | [Fiber#resume]
 *                        v
 *                   +--> FIBER_RESUMED ----+
 *    [Fiber#resume] |    | [Fiber.yield]   |
 *                   |    v                 |
 *                   +-- FIBER_SUSPENDED    | [Terminate]
 *                                          |
 *                       FIBER_TERMINATED <-+
 */
enum fiber_status {
    FIBER_CREATED,
    FIBER_RESUMED,
    FIBER_SUSPENDED,
    FIBER_TERMINATED
};

#define FIBER_CREATED_P(fiber)    ((fiber)->status == FIBER_CREATED)
#define FIBER_RESUMED_P(fiber)    ((fiber)->status == FIBER_RESUMED)
#define FIBER_SUSPENDED_P(fiber)  ((fiber)->status == FIBER_SUSPENDED)
#define FIBER_TERMINATED_P(fiber) ((fiber)->status == FIBER_TERMINATED)
#define FIBER_RUNNABLE_P(fiber)   (FIBER_CREATED_P(fiber) || FIBER_SUSPENDED_P(fiber))

struct rb_fiber_struct {
    rb_context_t cont;
    VALUE first_proc;
    struct rb_fiber_struct *prev;
    struct rb_fiber_struct *resuming_fiber;

    BITFIELD(enum fiber_status, status, 2);
    /* Whether the fiber is allowed to implicitly yield. */
    unsigned int yielding : 1;
    unsigned int blocking : 1;

    struct coroutine_context context;
    struct fiber_pool_stack stack;
};

static struct fiber_pool shared_fiber_pool = {NULL, NULL, 0, 0, 0, 0};

static ID fiber_initialize_keywords[2] = {0};

/*
 * FreeBSD require a first (i.e. addr) argument of mmap(2) is not NULL
 * if MAP_STACK is passed.
 * http://www.FreeBSD.org/cgi/query-pr.cgi?pr=158755
 */
#if defined(MAP_STACK) && !defined(__FreeBSD__) && !defined(__FreeBSD_kernel__)
#define FIBER_STACK_FLAGS (MAP_PRIVATE | MAP_ANON | MAP_STACK)
#else
#define FIBER_STACK_FLAGS (MAP_PRIVATE | MAP_ANON)
#endif

#define ERRNOMSG strerror(errno)

// Locates the stack vacancy details for the given stack.
// Requires that fiber_pool_vacancy fits within one page.
inline static struct fiber_pool_vacancy *
fiber_pool_vacancy_pointer(void * base, size_t size)
{
    STACK_GROW_DIR_DETECTION;

    return (struct fiber_pool_vacancy *)(
        (char*)base + STACK_DIR_UPPER(0, size - RB_PAGE_SIZE)
    );
}

// Reset the current stack pointer and available size of the given stack.
inline static void
fiber_pool_stack_reset(struct fiber_pool_stack * stack)
{
    STACK_GROW_DIR_DETECTION;

    stack->current = (char*)stack->base + STACK_DIR_UPPER(0, stack->size);
    stack->available = stack->size;
}

// A pointer to the base of the current unused portion of the stack.
inline static void *
fiber_pool_stack_base(struct fiber_pool_stack * stack)
{
    STACK_GROW_DIR_DETECTION;

    VM_ASSERT(stack->current);

    return STACK_DIR_UPPER(stack->current, (char*)stack->current - stack->available);
}

// Allocate some memory from the stack. Used to allocate vm_stack inline with machine stack.
// @sa fiber_initialize_coroutine
inline static void *
fiber_pool_stack_alloca(struct fiber_pool_stack * stack, size_t offset)
{
    STACK_GROW_DIR_DETECTION;

    if (DEBUG) fprintf(stderr, "fiber_pool_stack_alloca(%p): %"PRIuSIZE"/%"PRIuSIZE"\n", (void*)stack, offset, stack->available);
    VM_ASSERT(stack->available >= offset);

    // The pointer to the memory being allocated:
    void * pointer = STACK_DIR_UPPER(stack->current, (char*)stack->current - offset);

    // Move the stack pointer:
    stack->current = STACK_DIR_UPPER((char*)stack->current + offset, (char*)stack->current - offset);
    stack->available -= offset;

    return pointer;
}

// Reset the current stack pointer and available size of the given stack.
inline static void
fiber_pool_vacancy_reset(struct fiber_pool_vacancy * vacancy)
{
    fiber_pool_stack_reset(&vacancy->stack);

    // Consume one page of the stack because it's used for the vacancy list:
    fiber_pool_stack_alloca(&vacancy->stack, RB_PAGE_SIZE);
}

inline static struct fiber_pool_vacancy *
fiber_pool_vacancy_push(struct fiber_pool_vacancy * vacancy, struct fiber_pool_vacancy * head)
{
    vacancy->next = head;

#ifdef FIBER_POOL_ALLOCATION_FREE
    if (head) {
        head->previous = vacancy;
        vacancy->previous = NULL;
    }
#endif

    return vacancy;
}

#ifdef FIBER_POOL_ALLOCATION_FREE
static void
fiber_pool_vacancy_remove(struct fiber_pool_vacancy * vacancy)
{
    if (vacancy->next) {
        vacancy->next->previous = vacancy->previous;
    }

    if (vacancy->previous) {
        vacancy->previous->next = vacancy->next;
    }
    else {
        // It's the head of the list:
        vacancy->stack.pool->vacancies = vacancy->next;
    }
}

inline static struct fiber_pool_vacancy *
fiber_pool_vacancy_pop(struct fiber_pool * pool)
{
    struct fiber_pool_vacancy * vacancy = pool->vacancies;

    if (vacancy) {
        fiber_pool_vacancy_remove(vacancy);
    }

    return vacancy;
}
#else
inline static struct fiber_pool_vacancy *
fiber_pool_vacancy_pop(struct fiber_pool * pool)
{
    struct fiber_pool_vacancy * vacancy = pool->vacancies;

    if (vacancy) {
        pool->vacancies = vacancy->next;
    }

    return vacancy;
}
#endif

// Initialize the vacant stack. The [base, size] allocation should not include the guard page.
// @param base The pointer to the lowest address of the allocated memory.
// @param size The size of the allocated memory.
inline static struct fiber_pool_vacancy *
fiber_pool_vacancy_initialize(struct fiber_pool * fiber_pool, struct fiber_pool_vacancy * vacancies, void * base, size_t size)
{
    struct fiber_pool_vacancy * vacancy = fiber_pool_vacancy_pointer(base, size);

    vacancy->stack.base = base;
    vacancy->stack.size = size;

    fiber_pool_vacancy_reset(vacancy);

    vacancy->stack.pool = fiber_pool;

    return fiber_pool_vacancy_push(vacancy, vacancies);
}

// Allocate a maximum of count stacks, size given by stride.
// @param count the number of stacks to allocate / were allocated.
// @param stride the size of the individual stacks.
// @return [void *] the allocated memory or NULL if allocation failed.
inline static void *
fiber_pool_allocate_memory(size_t * count, size_t stride)
{
    // We use a divide-by-2 strategy to try and allocate memory. We are trying
    // to allocate `count` stacks. In normal situation, this won't fail. But
    // if we ran out of address space, or we are allocating more memory than
    // the system would allow (e.g. overcommit * physical memory + swap), we
    // divide count by two and try again. This condition should only be
    // encountered in edge cases, but we handle it here gracefully.
    while (*count > 1) {
#if defined(_WIN32)
        void * base = VirtualAlloc(0, (*count)*stride, MEM_COMMIT, PAGE_READWRITE);

        if (!base) {
            *count = (*count) >> 1;
        }
        else {
            return base;
        }
#else
        errno = 0;
        void * base = mmap(NULL, (*count)*stride, PROT_READ | PROT_WRITE, FIBER_STACK_FLAGS, -1, 0);

        if (base == MAP_FAILED) {
            // If the allocation fails, count = count / 2, and try again.
            *count = (*count) >> 1;
        }
        else {
#if defined(MADV_FREE_REUSE)
            // On Mac MADV_FREE_REUSE is necessary for the task_info api
            // to keep the accounting accurate as possible when a page is marked as reusable
            // it can possibly not occurring at first call thus re-iterating if necessary.
            while (madvise(base, (*count)*stride, MADV_FREE_REUSE) == -1 && errno == EAGAIN);
#endif
            return base;
        }
#endif
    }

    return NULL;
}

// Given an existing fiber pool, expand it by the specified number of stacks.
// @param count the maximum number of stacks to allocate.
// @return the allocated fiber pool.
// @sa fiber_pool_allocation_free
static struct fiber_pool_allocation *
fiber_pool_expand(struct fiber_pool * fiber_pool, size_t count)
{
    STACK_GROW_DIR_DETECTION;

    size_t size = fiber_pool->size;
    size_t stride = size + RB_PAGE_SIZE;

    // Allocate the memory required for the stacks:
    void * base = fiber_pool_allocate_memory(&count, stride);

    if (base == NULL) {
        rb_raise(rb_eFiberError, "can't alloc machine stack to fiber (%"PRIuSIZE" x %"PRIuSIZE" bytes): %s", count, size, ERRNOMSG);
    }

    struct fiber_pool_vacancy * vacancies = fiber_pool->vacancies;
    struct fiber_pool_allocation * allocation = RB_ALLOC(struct fiber_pool_allocation);

    // Initialize fiber pool allocation:
    allocation->base = base;
    allocation->size = size;
    allocation->stride = stride;
    allocation->count = count;
#ifdef FIBER_POOL_ALLOCATION_FREE
    allocation->used = 0;
#endif
    allocation->pool = fiber_pool;

    if (DEBUG) {
        fprintf(stderr, "fiber_pool_expand(%"PRIuSIZE"): %p, %"PRIuSIZE"/%"PRIuSIZE" x [%"PRIuSIZE":%"PRIuSIZE"]\n",
                count, (void*)fiber_pool, fiber_pool->used, fiber_pool->count, size, fiber_pool->vm_stack_size);
    }

    // Iterate over all stacks, initializing the vacancy list:
    for (size_t i = 0; i < count; i += 1) {
        void * base = (char*)allocation->base + (stride * i);
        void * page = (char*)base + STACK_DIR_UPPER(size, 0);

#if defined(_WIN32)
        DWORD old_protect;

        if (!VirtualProtect(page, RB_PAGE_SIZE, PAGE_READWRITE | PAGE_GUARD, &old_protect)) {
            VirtualFree(allocation->base, 0, MEM_RELEASE);
            rb_raise(rb_eFiberError, "can't set a guard page: %s", ERRNOMSG);
        }
#else
        if (mprotect(page, RB_PAGE_SIZE, PROT_NONE) < 0) {
            munmap(allocation->base, count*stride);
            rb_raise(rb_eFiberError, "can't set a guard page: %s", ERRNOMSG);
        }
#endif

        vacancies = fiber_pool_vacancy_initialize(
            fiber_pool, vacancies,
            (char*)base + STACK_DIR_UPPER(0, RB_PAGE_SIZE),
            size
        );

#ifdef FIBER_POOL_ALLOCATION_FREE
        vacancies->stack.allocation = allocation;
#endif
    }

    // Insert the allocation into the head of the pool:
    allocation->next = fiber_pool->allocations;

#ifdef FIBER_POOL_ALLOCATION_FREE
    if (allocation->next) {
        allocation->next->previous = allocation;
    }

    allocation->previous = NULL;
#endif

    fiber_pool->allocations = allocation;
    fiber_pool->vacancies = vacancies;
    fiber_pool->count += count;

    return allocation;
}

// Initialize the specified fiber pool with the given number of stacks.
// @param vm_stack_size The size of the vm stack to allocate.
static void
fiber_pool_initialize(struct fiber_pool * fiber_pool, size_t size, size_t count, size_t vm_stack_size)
{
    VM_ASSERT(vm_stack_size < size);

    fiber_pool->allocations = NULL;
    fiber_pool->vacancies = NULL;
    fiber_pool->size = ((size / RB_PAGE_SIZE) + 1) * RB_PAGE_SIZE;
    fiber_pool->count = 0;
    fiber_pool->initial_count = count;
    fiber_pool->free_stacks = 1;
    fiber_pool->used = 0;

    fiber_pool->vm_stack_size = vm_stack_size;

    fiber_pool_expand(fiber_pool, count);
}

#ifdef FIBER_POOL_ALLOCATION_FREE
// Free the list of fiber pool allocations.
static void
fiber_pool_allocation_free(struct fiber_pool_allocation * allocation)
{
    STACK_GROW_DIR_DETECTION;

    VM_ASSERT(allocation->used == 0);

    if (DEBUG) fprintf(stderr, "fiber_pool_allocation_free: %p base=%p count=%"PRIuSIZE"\n", (void*)allocation, allocation->base, allocation->count);

    size_t i;
    for (i = 0; i < allocation->count; i += 1) {
        void * base = (char*)allocation->base + (allocation->stride * i) + STACK_DIR_UPPER(0, RB_PAGE_SIZE);

        struct fiber_pool_vacancy * vacancy = fiber_pool_vacancy_pointer(base, allocation->size);

        // Pop the vacant stack off the free list:
        fiber_pool_vacancy_remove(vacancy);
    }

#ifdef _WIN32
    VirtualFree(allocation->base, 0, MEM_RELEASE);
#else
    munmap(allocation->base, allocation->stride * allocation->count);
#endif

    if (allocation->previous) {
        allocation->previous->next = allocation->next;
    }
    else {
        // We are the head of the list, so update the pool:
        allocation->pool->allocations = allocation->next;
    }

    if (allocation->next) {
        allocation->next->previous = allocation->previous;
    }

    allocation->pool->count -= allocation->count;

    ruby_xfree(allocation);
}
#endif

// Acquire a stack from the given fiber pool. If none are available, allocate more.
static struct fiber_pool_stack
fiber_pool_stack_acquire(struct fiber_pool * fiber_pool)
{
    struct fiber_pool_vacancy * vacancy = fiber_pool_vacancy_pop(fiber_pool);

    if (DEBUG) fprintf(stderr, "fiber_pool_stack_acquire: %p used=%"PRIuSIZE"\n", (void*)fiber_pool->vacancies, fiber_pool->used);

    if (!vacancy) {
        const size_t maximum = FIBER_POOL_ALLOCATION_MAXIMUM_SIZE;
        const size_t minimum = fiber_pool->initial_count;

        size_t count = fiber_pool->count;
        if (count > maximum) count = maximum;
        if (count < minimum) count = minimum;

        fiber_pool_expand(fiber_pool, count);

        // The free list should now contain some stacks:
        VM_ASSERT(fiber_pool->vacancies);

        vacancy = fiber_pool_vacancy_pop(fiber_pool);
    }

    VM_ASSERT(vacancy);
    VM_ASSERT(vacancy->stack.base);

    // Take the top item from the free list:
    fiber_pool->used += 1;

#ifdef FIBER_POOL_ALLOCATION_FREE
    vacancy->stack.allocation->used += 1;
#endif

    fiber_pool_stack_reset(&vacancy->stack);

    return vacancy->stack;
}

// We advise the operating system that the stack memory pages are no longer being used.
// This introduce some performance overhead but allows system to relaim memory when there is pressure.
static inline void
fiber_pool_stack_free(struct fiber_pool_stack * stack)
{
    void * base = fiber_pool_stack_base(stack);
    size_t size = stack->available;

    // If this is not true, the vacancy information will almost certainly be destroyed:
    VM_ASSERT(size <= (stack->size - RB_PAGE_SIZE));

    if (DEBUG) fprintf(stderr, "fiber_pool_stack_free: %p+%"PRIuSIZE" [base=%p, size=%"PRIuSIZE"]\n", base, size, stack->base, stack->size);

#if VM_CHECK_MODE > 0 && defined(MADV_DONTNEED)
    // This immediately discards the pages and the memory is reset to zero.
    madvise(base, size, MADV_DONTNEED);
#elif defined(POSIX_MADV_DONTNEED)
    posix_madvise(base, size, POSIX_MADV_DONTNEED);
#elif defined(MADV_FREE_REUSABLE)
    // Acknowledge the kernel down to the task info api we make this
    // page reusable for future use.
    // As for MADV_FREE_REUSE below we ensure in the rare occasions the task was not
    // completed at the time of the call to re-iterate.
    while (madvise(base, size, MADV_FREE_REUSABLE) == -1 && errno == EAGAIN);
#elif defined(MADV_FREE)
    madvise(base, size, MADV_FREE);
#elif defined(MADV_DONTNEED)
    madvise(base, size, MADV_DONTNEED);
#elif defined(_WIN32)
    VirtualAlloc(base, size, MEM_RESET, PAGE_READWRITE);
    // Not available in all versions of Windows.
    //DiscardVirtualMemory(base, size);
#endif
}

// Release and return a stack to the vacancy list.
static void
fiber_pool_stack_release(struct fiber_pool_stack * stack)
{
    struct fiber_pool * pool = stack->pool;
    struct fiber_pool_vacancy * vacancy = fiber_pool_vacancy_pointer(stack->base, stack->size);

    if (DEBUG) fprintf(stderr, "fiber_pool_stack_release: %p used=%"PRIuSIZE"\n", stack->base, stack->pool->used);

    // Copy the stack details into the vacancy area:
    vacancy->stack = *stack;
    // After this point, be careful about updating/using state in stack, since it's copied to the vacancy area.

    // Reset the stack pointers and reserve space for the vacancy data:
    fiber_pool_vacancy_reset(vacancy);

    // Push the vacancy into the vancancies list:
    pool->vacancies = fiber_pool_vacancy_push(vacancy, stack->pool->vacancies);
    pool->used -= 1;

#ifdef FIBER_POOL_ALLOCATION_FREE
    struct fiber_pool_allocation * allocation = stack->allocation;

    allocation->used -= 1;

    // Release address space and/or dirty memory:
    if (allocation->used == 0) {
        fiber_pool_allocation_free(allocation);
    }
    else if (stack->pool->free_stacks) {
        fiber_pool_stack_free(&vacancy->stack);
    }
#else
    // This is entirely optional, but clears the dirty flag from the stack memory, so it won't get swapped to disk when there is memory pressure:
    if (stack->pool->free_stacks) {
        fiber_pool_stack_free(&vacancy->stack);
    }
#endif
}

static inline void
ec_switch(rb_thread_t *th, rb_fiber_t *fiber)
{
    rb_execution_context_t *ec = &fiber->cont.saved_ec;
    rb_ractor_set_current_ec(th->ractor, th->ec = ec);
    // ruby_current_execution_context_ptr = th->ec = ec;

    /*
     * timer-thread may set trap interrupt on previous th->ec at any time;
     * ensure we do not delay (or lose) the trap interrupt handling.
     */
    if (th->vm->ractor.main_thread == th &&
        rb_signal_buff_size() > 0) {
        RUBY_VM_SET_TRAP_INTERRUPT(ec);
    }

    VM_ASSERT(ec->fiber_ptr->cont.self == 0 || ec->vm_stack != NULL);
}

static inline void
fiber_restore_thread(rb_thread_t *th, rb_fiber_t *fiber)
{
    ec_switch(th, fiber);
    VM_ASSERT(th->ec->fiber_ptr == fiber);
}

static COROUTINE
fiber_entry(struct coroutine_context * from, struct coroutine_context * to)
{
    rb_fiber_t *fiber = to->argument;
    rb_thread_t *thread = fiber->cont.saved_ec.thread_ptr;

#ifdef COROUTINE_PTHREAD_CONTEXT
    ruby_thread_set_native(thread);
#endif

    fiber_restore_thread(thread, fiber);

    rb_fiber_start(fiber);

#ifndef COROUTINE_PTHREAD_CONTEXT
    VM_UNREACHABLE(fiber_entry);
#endif
}

// Initialize a fiber's coroutine's machine stack and vm stack.
static VALUE *
fiber_initialize_coroutine(rb_fiber_t *fiber, size_t * vm_stack_size)
{
    struct fiber_pool * fiber_pool = fiber->stack.pool;
    rb_execution_context_t *sec = &fiber->cont.saved_ec;
    void * vm_stack = NULL;

    VM_ASSERT(fiber_pool != NULL);

    fiber->stack = fiber_pool_stack_acquire(fiber_pool);
    vm_stack = fiber_pool_stack_alloca(&fiber->stack, fiber_pool->vm_stack_size);
    *vm_stack_size = fiber_pool->vm_stack_size;

    coroutine_initialize(&fiber->context, fiber_entry, fiber_pool_stack_base(&fiber->stack), fiber->stack.available);

    // The stack for this execution context is the one we allocated:
    sec->machine.stack_start = fiber->stack.current;
    sec->machine.stack_maxsize = fiber->stack.available;

    fiber->context.argument = (void*)fiber;

    return vm_stack;
}

// Release the stack from the fiber, it's execution context, and return it to the fiber pool.
static void
fiber_stack_release(rb_fiber_t * fiber)
{
    rb_execution_context_t *ec = &fiber->cont.saved_ec;

    if (DEBUG) fprintf(stderr, "fiber_stack_release: %p, stack.base=%p\n", (void*)fiber, fiber->stack.base);

    // Return the stack back to the fiber pool if it wasn't already:
    if (fiber->stack.base) {
        fiber_pool_stack_release(&fiber->stack);
        fiber->stack.base = NULL;
    }

    // The stack is no longer associated with this execution context:
    rb_ec_clear_vm_stack(ec);
}

static const char *
fiber_status_name(enum fiber_status s)
{
    switch (s) {
      case FIBER_CREATED: return "created";
      case FIBER_RESUMED: return "resumed";
      case FIBER_SUSPENDED: return "suspended";
      case FIBER_TERMINATED: return "terminated";
    }
    VM_UNREACHABLE(fiber_status_name);
    return NULL;
}

static void
fiber_verify(const rb_fiber_t *fiber)
{
#if VM_CHECK_MODE > 0
    VM_ASSERT(fiber->cont.saved_ec.fiber_ptr == fiber);

    switch (fiber->status) {
      case FIBER_RESUMED:
        VM_ASSERT(fiber->cont.saved_ec.vm_stack != NULL);
        break;
      case FIBER_SUSPENDED:
        VM_ASSERT(fiber->cont.saved_ec.vm_stack != NULL);
        break;
      case FIBER_CREATED:
      case FIBER_TERMINATED:
        /* TODO */
        break;
      default:
        VM_UNREACHABLE(fiber_verify);
    }
#endif
}

inline static void
fiber_status_set(rb_fiber_t *fiber, enum fiber_status s)
{
    // if (DEBUG) fprintf(stderr, "fiber: %p, status: %s -> %s\n", (void *)fiber, fiber_status_name(fiber->status), fiber_status_name(s));
    VM_ASSERT(!FIBER_TERMINATED_P(fiber));
    VM_ASSERT(fiber->status != s);
    fiber_verify(fiber);
    fiber->status = s;
}

static rb_context_t *
cont_ptr(VALUE obj)
{
    rb_context_t *cont;

    TypedData_Get_Struct(obj, rb_context_t, &cont_data_type, cont);

    return cont;
}

static rb_fiber_t *
fiber_ptr(VALUE obj)
{
    rb_fiber_t *fiber;

    TypedData_Get_Struct(obj, rb_fiber_t, &fiber_data_type, fiber);
    if (!fiber) rb_raise(rb_eFiberError, "uninitialized fiber");

    return fiber;
}

NOINLINE(static VALUE cont_capture(volatile int *volatile stat));

#define THREAD_MUST_BE_RUNNING(th) do { \
        if (!(th)->ec->tag) rb_raise(rb_eThreadError, "not running thread"); \
    } while (0)

rb_thread_t*
rb_fiber_threadptr(const rb_fiber_t *fiber)
{
    return fiber->cont.saved_ec.thread_ptr;
}

static VALUE
cont_thread_value(const rb_context_t *cont)
{
    return cont->saved_ec.thread_ptr->self;
}

static void
cont_compact(void *ptr)
{
    rb_context_t *cont = ptr;

    if (cont->self) {
        cont->self = rb_gc_location(cont->self);
    }
    cont->value = rb_gc_location(cont->value);
    rb_execution_context_update(&cont->saved_ec);
}

static void
cont_mark(void *ptr)
{
    rb_context_t *cont = ptr;

    RUBY_MARK_ENTER("cont");
    if (cont->self) {
        rb_gc_mark_movable(cont->self);
    }
    rb_gc_mark_movable(cont->value);

    rb_execution_context_mark(&cont->saved_ec);
    rb_gc_mark(cont_thread_value(cont));

    if (cont->saved_vm_stack.ptr) {
#ifdef CAPTURE_JUST_VALID_VM_STACK
        rb_gc_mark_locations(cont->saved_vm_stack.ptr,
                             cont->saved_vm_stack.ptr + cont->saved_vm_stack.slen + cont->saved_vm_stack.clen);
#else
        rb_gc_mark_locations(cont->saved_vm_stack.ptr,
                             cont->saved_vm_stack.ptr, cont->saved_ec.stack_size);
#endif
    }

    if (cont->machine.stack) {
        if (cont->type == CONTINUATION_CONTEXT) {
            /* cont */
            rb_gc_mark_locations(cont->machine.stack,
                                 cont->machine.stack + cont->machine.stack_size);
        }
        else {
            /* fiber */
            const rb_fiber_t *fiber = (rb_fiber_t*)cont;

            if (!FIBER_TERMINATED_P(fiber)) {
                rb_gc_mark_locations(cont->machine.stack,
                                     cont->machine.stack + cont->machine.stack_size);
            }
        }
    }

    RUBY_MARK_LEAVE("cont");
}

#if 0
static int
fiber_is_root_p(const rb_fiber_t *fiber)
{
    return fiber == fiber->cont.saved_ec.thread_ptr->root_fiber;
}
#endif

static void
cont_free(void *ptr)
{
    rb_context_t *cont = ptr;

    RUBY_FREE_ENTER("cont");

    if (cont->type == CONTINUATION_CONTEXT) {
        ruby_xfree(cont->saved_ec.vm_stack);
        ruby_xfree(cont->ensure_array);
        RUBY_FREE_UNLESS_NULL(cont->machine.stack);
    }
    else {
        rb_fiber_t *fiber = (rb_fiber_t*)cont;
        coroutine_destroy(&fiber->context);
        fiber_stack_release(fiber);
    }

    RUBY_FREE_UNLESS_NULL(cont->saved_vm_stack.ptr);

    if (mjit_enabled) {
        VM_ASSERT(cont->mjit_cont != NULL);
        mjit_cont_free(cont->mjit_cont);
    }
    /* free rb_cont_t or rb_fiber_t */
    ruby_xfree(ptr);
    RUBY_FREE_LEAVE("cont");
}

static size_t
cont_memsize(const void *ptr)
{
    const rb_context_t *cont = ptr;
    size_t size = 0;

    size = sizeof(*cont);
    if (cont->saved_vm_stack.ptr) {
#ifdef CAPTURE_JUST_VALID_VM_STACK
        size_t n = (cont->saved_vm_stack.slen + cont->saved_vm_stack.clen);
#else
        size_t n = cont->saved_ec.vm_stack_size;
#endif
        size += n * sizeof(*cont->saved_vm_stack.ptr);
    }

    if (cont->machine.stack) {
        size += cont->machine.stack_size * sizeof(*cont->machine.stack);
    }

    return size;
}

void
rb_fiber_update_self(rb_fiber_t *fiber)
{
    if (fiber->cont.self) {
        fiber->cont.self = rb_gc_location(fiber->cont.self);
    }
    else {
        rb_execution_context_update(&fiber->cont.saved_ec);
    }
}

void
rb_fiber_mark_self(const rb_fiber_t *fiber)
{
    if (fiber->cont.self) {
        rb_gc_mark_movable(fiber->cont.self);
    }
    else {
        rb_execution_context_mark(&fiber->cont.saved_ec);
    }
}

static void
fiber_compact(void *ptr)
{
    rb_fiber_t *fiber = ptr;
    fiber->first_proc = rb_gc_location(fiber->first_proc);

    if (fiber->prev) rb_fiber_update_self(fiber->prev);

    cont_compact(&fiber->cont);
    fiber_verify(fiber);
}

static void
fiber_mark(void *ptr)
{
    rb_fiber_t *fiber = ptr;
    RUBY_MARK_ENTER("cont");
    fiber_verify(fiber);
    rb_gc_mark_movable(fiber->first_proc);
    if (fiber->prev) rb_fiber_mark_self(fiber->prev);
    cont_mark(&fiber->cont);
    RUBY_MARK_LEAVE("cont");
}

static void
fiber_free(void *ptr)
{
    rb_fiber_t *fiber = ptr;
    RUBY_FREE_ENTER("fiber");

    if (DEBUG) fprintf(stderr, "fiber_free: %p[%p]\n", (void *)fiber, fiber->stack.base);

    if (fiber->cont.saved_ec.local_storage) {
        rb_id_table_free(fiber->cont.saved_ec.local_storage);
    }

    cont_free(&fiber->cont);
    RUBY_FREE_LEAVE("fiber");
}

static size_t
fiber_memsize(const void *ptr)
{
    const rb_fiber_t *fiber = ptr;
    size_t size = sizeof(*fiber);
    const rb_execution_context_t *saved_ec = &fiber->cont.saved_ec;
    const rb_thread_t *th = rb_ec_thread_ptr(saved_ec);

    /*
     * vm.c::thread_memsize already counts th->ec->local_storage
     */
    if (saved_ec->local_storage && fiber != th->root_fiber) {
        size += rb_id_table_memsize(saved_ec->local_storage);
    }
    size += cont_memsize(&fiber->cont);
    return size;
}

VALUE
rb_obj_is_fiber(VALUE obj)
{
    return RBOOL(rb_typeddata_is_kind_of(obj, &fiber_data_type));
}

static void
cont_save_machine_stack(rb_thread_t *th, rb_context_t *cont)
{
    size_t size;

    SET_MACHINE_STACK_END(&th->ec->machine.stack_end);

    if (th->ec->machine.stack_start > th->ec->machine.stack_end) {
        size = cont->machine.stack_size = th->ec->machine.stack_start - th->ec->machine.stack_end;
        cont->machine.stack_src = th->ec->machine.stack_end;
    }
    else {
        size = cont->machine.stack_size = th->ec->machine.stack_end - th->ec->machine.stack_start;
        cont->machine.stack_src = th->ec->machine.stack_start;
    }

    if (cont->machine.stack) {
        REALLOC_N(cont->machine.stack, VALUE, size);
    }
    else {
        cont->machine.stack = ALLOC_N(VALUE, size);
    }

    FLUSH_REGISTER_WINDOWS;
    MEMCPY(cont->machine.stack, cont->machine.stack_src, VALUE, size);
}

static const rb_data_type_t cont_data_type = {
    "continuation",
    {cont_mark, cont_free, cont_memsize, cont_compact},
    0, 0, RUBY_TYPED_FREE_IMMEDIATELY
};

static inline void
cont_save_thread(rb_context_t *cont, rb_thread_t *th)
{
    rb_execution_context_t *sec = &cont->saved_ec;

    VM_ASSERT(th->status == THREAD_RUNNABLE);

    /* save thread context */
    *sec = *th->ec;

    /* saved_ec->machine.stack_end should be NULL */
    /* because it may happen GC afterward */
    sec->machine.stack_end = NULL;
}

static void
cont_init_mjit_cont(rb_context_t *cont)
{
    VM_ASSERT(cont->mjit_cont == NULL);
    if (mjit_enabled) {
        cont->mjit_cont = mjit_cont_new(&(cont->saved_ec));
    }
}

static void
cont_init(rb_context_t *cont, rb_thread_t *th)
{
    /* save thread context */
    cont_save_thread(cont, th);
    cont->saved_ec.thread_ptr = th;
    cont->saved_ec.local_storage = NULL;
    cont->saved_ec.local_storage_recursive_hash = Qnil;
    cont->saved_ec.local_storage_recursive_hash_for_trace = Qnil;
    cont_init_mjit_cont(cont);
}

static rb_context_t *
cont_new(VALUE klass)
{
    rb_context_t *cont;
    volatile VALUE contval;
    rb_thread_t *th = GET_THREAD();

    THREAD_MUST_BE_RUNNING(th);
    contval = TypedData_Make_Struct(klass, rb_context_t, &cont_data_type, cont);
    cont->self = contval;
    cont_init(cont, th);
    return cont;
}

VALUE
rb_fiberptr_self(struct rb_fiber_struct *fiber)
{
    return fiber->cont.self;
}

unsigned int
rb_fiberptr_blocking(struct rb_fiber_struct *fiber)
{
    return fiber->blocking;
}

// This is used for root_fiber because other fibers call cont_init_mjit_cont through cont_new.
void
rb_fiber_init_mjit_cont(struct rb_fiber_struct *fiber)
{
    cont_init_mjit_cont(&fiber->cont);
}

#if 0
void
show_vm_stack(const rb_execution_context_t *ec)
{
    VALUE *p = ec->vm_stack;
    while (p < ec->cfp->sp) {
        fprintf(stderr, "%3d ", (int)(p - ec->vm_stack));
        rb_obj_info_dump(*p);
        p++;
    }
}

void
show_vm_pcs(const rb_control_frame_t *cfp,
            const rb_control_frame_t *end_of_cfp)
{
    int i=0;
    while (cfp != end_of_cfp) {
        int pc = 0;
        if (cfp->iseq) {
            pc = cfp->pc - cfp->iseq->body->iseq_encoded;
        }
        fprintf(stderr, "%2d pc: %d\n", i++, pc);
        cfp = RUBY_VM_PREVIOUS_CONTROL_FRAME(cfp);
    }
}
#endif
COMPILER_WARNING_PUSH
#ifdef __clang__
COMPILER_WARNING_IGNORED(-Wduplicate-decl-specifier)
#endif
static VALUE
cont_capture(volatile int *volatile stat)
{
    rb_context_t *volatile cont;
    rb_thread_t *th = GET_THREAD();
    volatile VALUE contval;
    const rb_execution_context_t *ec = th->ec;

    THREAD_MUST_BE_RUNNING(th);
    rb_vm_stack_to_heap(th->ec);
    cont = cont_new(rb_cContinuation);
    contval = cont->self;

#ifdef CAPTURE_JUST_VALID_VM_STACK
    cont->saved_vm_stack.slen = ec->cfp->sp - ec->vm_stack;
    cont->saved_vm_stack.clen = ec->vm_stack + ec->vm_stack_size - (VALUE*)ec->cfp;
    cont->saved_vm_stack.ptr = ALLOC_N(VALUE, cont->saved_vm_stack.slen + cont->saved_vm_stack.clen);
    MEMCPY(cont->saved_vm_stack.ptr,
           ec->vm_stack,
           VALUE, cont->saved_vm_stack.slen);
    MEMCPY(cont->saved_vm_stack.ptr + cont->saved_vm_stack.slen,
           (VALUE*)ec->cfp,
           VALUE,
           cont->saved_vm_stack.clen);
#else
    cont->saved_vm_stack.ptr = ALLOC_N(VALUE, ec->vm_stack_size);
    MEMCPY(cont->saved_vm_stack.ptr, ec->vm_stack, VALUE, ec->vm_stack_size);
#endif
    // At this point, `cfp` is valid but `vm_stack` should be cleared:
    rb_ec_set_vm_stack(&cont->saved_ec, NULL, 0);
    VM_ASSERT(cont->saved_ec.cfp != NULL);
    cont_save_machine_stack(th, cont);

    /* backup ensure_list to array for search in another context */
    {
        rb_ensure_list_t *p;
        int size = 0;
        rb_ensure_entry_t *entry;
        for (p=th->ec->ensure_list; p; p=p->next)
            size++;
        entry = cont->ensure_array = ALLOC_N(rb_ensure_entry_t,size+1);
        for (p=th->ec->ensure_list; p; p=p->next) {
            if (!p->entry.marker)
                p->entry.marker = rb_ary_tmp_new(0); /* dummy object */
            *entry++ = p->entry;
        }
        entry->marker = 0;
    }

    if (ruby_setjmp(cont->jmpbuf)) {
        VALUE value;

        VAR_INITIALIZED(cont);
        value = cont->value;
        if (cont->argc == -1) rb_exc_raise(value);
        cont->value = Qnil;
        *stat = 1;
        return value;
    }
    else {
        *stat = 0;
        return contval;
    }
}
COMPILER_WARNING_POP

static inline void
cont_restore_thread(rb_context_t *cont)
{
    rb_thread_t *th = GET_THREAD();

    /* restore thread context */
    if (cont->type == CONTINUATION_CONTEXT) {
        /* continuation */
        rb_execution_context_t *sec = &cont->saved_ec;
        rb_fiber_t *fiber = NULL;

        if (sec->fiber_ptr != NULL) {
            fiber = sec->fiber_ptr;
        }
        else if (th->root_fiber) {
            fiber = th->root_fiber;
        }

        if (fiber && th->ec != &fiber->cont.saved_ec) {
            ec_switch(th, fiber);
        }

        if (th->ec->trace_arg != sec->trace_arg) {
            rb_raise(rb_eRuntimeError, "can't call across trace_func");
        }

        /* copy vm stack */
#ifdef CAPTURE_JUST_VALID_VM_STACK
        MEMCPY(th->ec->vm_stack,
               cont->saved_vm_stack.ptr,
               VALUE, cont->saved_vm_stack.slen);
        MEMCPY(th->ec->vm_stack + th->ec->vm_stack_size - cont->saved_vm_stack.clen,
               cont->saved_vm_stack.ptr + cont->saved_vm_stack.slen,
               VALUE, cont->saved_vm_stack.clen);
#else
        MEMCPY(th->ec->vm_stack, cont->saved_vm_stack.ptr, VALUE, sec->vm_stack_size);
#endif
        /* other members of ec */

        th->ec->cfp = sec->cfp;
        th->ec->raised_flag = sec->raised_flag;
        th->ec->tag = sec->tag;
        th->ec->root_lep = sec->root_lep;
        th->ec->root_svar = sec->root_svar;
        th->ec->ensure_list = sec->ensure_list;
        th->ec->errinfo = sec->errinfo;

        VM_ASSERT(th->ec->vm_stack != NULL);
    }
    else {
        /* fiber */
        fiber_restore_thread(th, (rb_fiber_t*)cont);
    }
}

NOINLINE(static void fiber_setcontext(rb_fiber_t *new_fiber, rb_fiber_t *old_fiber));

static void
fiber_setcontext(rb_fiber_t *new_fiber, rb_fiber_t *old_fiber)
{
    rb_thread_t *th = GET_THREAD();

    /* save old_fiber's machine stack - to ensure efficient garbage collection */
    if (!FIBER_TERMINATED_P(old_fiber)) {
        STACK_GROW_DIR_DETECTION;
        SET_MACHINE_STACK_END(&th->ec->machine.stack_end);
        if (STACK_DIR_UPPER(0, 1)) {
            old_fiber->cont.machine.stack_size = th->ec->machine.stack_start - th->ec->machine.stack_end;
            old_fiber->cont.machine.stack = th->ec->machine.stack_end;
        }
        else {
            old_fiber->cont.machine.stack_size = th->ec->machine.stack_end - th->ec->machine.stack_start;
            old_fiber->cont.machine.stack = th->ec->machine.stack_start;
        }
    }

    /* exchange machine_stack_start between old_fiber and new_fiber */
    old_fiber->cont.saved_ec.machine.stack_start = th->ec->machine.stack_start;

    /* old_fiber->machine.stack_end should be NULL */
    old_fiber->cont.saved_ec.machine.stack_end = NULL;

    // if (DEBUG) fprintf(stderr, "fiber_setcontext: %p[%p] -> %p[%p]\n", (void*)old_fiber, old_fiber->stack.base, (void*)new_fiber, new_fiber->stack.base);

    /* swap machine context */
    struct coroutine_context * from = coroutine_transfer(&old_fiber->context, &new_fiber->context);

    if (from == NULL) {
        rb_syserr_fail(errno, "coroutine_transfer");
    }

    /* restore thread context */
    fiber_restore_thread(th, old_fiber);

    // It's possible to get here, and new_fiber is already freed.
    // if (DEBUG) fprintf(stderr, "fiber_setcontext: %p[%p] <- %p[%p]\n", (void*)old_fiber, old_fiber->stack.base, (void*)new_fiber, new_fiber->stack.base);
}

NOINLINE(NORETURN(static void cont_restore_1(rb_context_t *)));

static void
cont_restore_1(rb_context_t *cont)
{
    cont_restore_thread(cont);

    /* restore machine stack */
#ifdef _M_AMD64
    {
        /* workaround for x64 SEH */
        jmp_buf buf;
        setjmp(buf);
        _JUMP_BUFFER *bp = (void*)&cont->jmpbuf;
        bp->Frame = ((_JUMP_BUFFER*)((void*)&buf))->Frame;
    }
#endif
    if (cont->machine.stack_src) {
        FLUSH_REGISTER_WINDOWS;
        MEMCPY(cont->machine.stack_src, cont->machine.stack,
               VALUE, cont->machine.stack_size);
    }

    ruby_longjmp(cont->jmpbuf, 1);
}

NORETURN(NOINLINE(static void cont_restore_0(rb_context_t *, VALUE *)));

static void
cont_restore_0(rb_context_t *cont, VALUE *addr_in_prev_frame)
{
    if (cont->machine.stack_src) {
#ifdef HAVE_ALLOCA
#define STACK_PAD_SIZE 1
#else
#define STACK_PAD_SIZE 1024
#endif
        VALUE space[STACK_PAD_SIZE];

#if !STACK_GROW_DIRECTION
        if (addr_in_prev_frame > &space[0]) {
            /* Stack grows downward */
#endif
#if STACK_GROW_DIRECTION <= 0
            volatile VALUE *const end = cont->machine.stack_src;
            if (&space[0] > end) {
# ifdef HAVE_ALLOCA
                volatile VALUE *sp = ALLOCA_N(VALUE, &space[0] - end);
                space[0] = *sp;
# else
                cont_restore_0(cont, &space[0]);
# endif
            }
#endif
#if !STACK_GROW_DIRECTION
        }
        else {
            /* Stack grows upward */
#endif
#if STACK_GROW_DIRECTION >= 0
            volatile VALUE *const end = cont->machine.stack_src + cont->machine.stack_size;
            if (&space[STACK_PAD_SIZE] < end) {
# ifdef HAVE_ALLOCA
                volatile VALUE *sp = ALLOCA_N(VALUE, end - &space[STACK_PAD_SIZE]);
                space[0] = *sp;
# else
                cont_restore_0(cont, &space[STACK_PAD_SIZE-1]);
# endif
            }
#endif
#if !STACK_GROW_DIRECTION
        }
#endif
    }
    cont_restore_1(cont);
}

/*
 *  Document-class: Continuation
 *
 *  Continuation objects are generated by Kernel#callcc,
 *  after having +require+d <i>continuation</i>. They hold
 *  a return address and execution context, allowing a nonlocal return
 *  to the end of the #callcc block from anywhere within a
 *  program. Continuations are somewhat analogous to a structured
 *  version of C's <code>setjmp/longjmp</code> (although they contain
 *  more state, so you might consider them closer to threads).
 *
 *  For instance:
 *
 *     require "continuation"
 *     arr = [ "Freddie", "Herbie", "Ron", "Max", "Ringo" ]
 *     callcc{|cc| $cc = cc}
 *     puts(message = arr.shift)
 *     $cc.call unless message =~ /Max/
 *
 *  <em>produces:</em>
 *
 *     Freddie
 *     Herbie
 *     Ron
 *     Max
 *
 *  Also you can call callcc in other methods:
 *
 *     require "continuation"
 *
 *     def g
 *       arr = [ "Freddie", "Herbie", "Ron", "Max", "Ringo" ]
 *       cc = callcc { |cc| cc }
 *       puts arr.shift
 *       return cc, arr.size
 *     end
 *
 *     def f
 *       c, size = g
 *       c.call(c) if size > 1
 *     end
 *
 *     f
 *
 *  This (somewhat contrived) example allows the inner loop to abandon
 *  processing early:
 *
 *     require "continuation"
 *     callcc {|cont|
 *       for i in 0..4
 *         print "#{i}: "
 *         for j in i*5...(i+1)*5
 *           cont.call() if j == 17
 *           printf "%3d", j
 *         end
 *       end
 *     }
 *     puts
 *
 *  <em>produces:</em>
 *
 *     0:   0  1  2  3  4
 *     1:   5  6  7  8  9
 *     2:  10 11 12 13 14
 *     3:  15 16
 */

/*
 *  call-seq:
 *     callcc {|cont| block }   ->  obj
 *
 *  Generates a Continuation object, which it passes to
 *  the associated block. You need to <code>require
 *  'continuation'</code> before using this method. Performing a
 *  <em>cont</em><code>.call</code> will cause the #callcc
 *  to return (as will falling through the end of the block). The
 *  value returned by the #callcc is the value of the
 *  block, or the value passed to <em>cont</em><code>.call</code>. See
 *  class Continuation for more details. Also see
 *  Kernel#throw for an alternative mechanism for
 *  unwinding a call stack.
 */

static VALUE
rb_callcc(VALUE self)
{
    volatile int called;
    volatile VALUE val = cont_capture(&called);

    if (called) {
        return val;
    }
    else {
        return rb_yield(val);
    }
}

static VALUE
make_passing_arg(int argc, const VALUE *argv)
{
    switch (argc) {
      case -1:
        return argv[0];
      case 0:
        return Qnil;
      case 1:
        return argv[0];
      default:
        return rb_ary_new4(argc, argv);
    }
}

typedef VALUE e_proc(VALUE);

/* CAUTION!! : Currently, error in rollback_func is not supported  */
/* same as rb_protect if set rollback_func to NULL */
void
ruby_register_rollback_func_for_ensure(e_proc *ensure_func, e_proc *rollback_func)
{
    st_table **table_p = &GET_VM()->ensure_rollback_table;
    if (UNLIKELY(*table_p == NULL)) {
        *table_p = st_init_numtable();
    }
    st_insert(*table_p, (st_data_t)ensure_func, (st_data_t)rollback_func);
}

static inline e_proc *
lookup_rollback_func(e_proc *ensure_func)
{
    st_table *table = GET_VM()->ensure_rollback_table;
    st_data_t val;
    if (table && st_lookup(table, (st_data_t)ensure_func, &val))
        return (e_proc *) val;
    return (e_proc *) Qundef;
}


static inline void
rollback_ensure_stack(VALUE self,rb_ensure_list_t *current,rb_ensure_entry_t *target)
{
    rb_ensure_list_t *p;
    rb_ensure_entry_t *entry;
    size_t i, j;
    size_t cur_size;
    size_t target_size;
    size_t base_point;
    e_proc *func;

    cur_size = 0;
    for (p=current; p; p=p->next)
        cur_size++;
    target_size = 0;
    for (entry=target; entry->marker; entry++)
        target_size++;

    /* search common stack point */
    p = current;
    base_point = cur_size;
    while (base_point) {
        if (target_size >= base_point &&
            p->entry.marker == target[target_size - base_point].marker)
            break;
        base_point --;
        p = p->next;
    }

    /* rollback function check */
    for (i=0; i < target_size - base_point; i++) {
        if (!lookup_rollback_func(target[i].e_proc)) {
            rb_raise(rb_eRuntimeError, "continuation called from out of critical rb_ensure scope");
        }
    }
    /* pop ensure stack */
    while (cur_size > base_point) {
        /* escape from ensure block */
        (*current->entry.e_proc)(current->entry.data2);
        current = current->next;
        cur_size--;
    }
    /* push ensure stack */
    for (j = 0; j < i; j++) {
        func = lookup_rollback_func(target[i - j - 1].e_proc);
        if ((VALUE)func != Qundef) {
            (*func)(target[i - j - 1].data2);
        }
    }
}

NORETURN(static VALUE rb_cont_call(int argc, VALUE *argv, VALUE contval));

/*
 *  call-seq:
 *     cont.call(args, ...)
 *     cont[args, ...]
 *
 *  Invokes the continuation. The program continues from the end of
 *  the #callcc block. If no arguments are given, the original #callcc
 *  returns +nil+. If one argument is given, #callcc returns
 *  it. Otherwise, an array containing <i>args</i> is returned.
 *
 *     callcc {|cont|  cont.call }           #=> nil
 *     callcc {|cont|  cont.call 1 }         #=> 1
 *     callcc {|cont|  cont.call 1, 2, 3 }   #=> [1, 2, 3]
 */

static VALUE
rb_cont_call(int argc, VALUE *argv, VALUE contval)
{
    rb_context_t *cont = cont_ptr(contval);
    rb_thread_t *th = GET_THREAD();

    if (cont_thread_value(cont) != th->self) {
        rb_raise(rb_eRuntimeError, "continuation called across threads");
    }
    if (cont->saved_ec.fiber_ptr) {
        if (th->ec->fiber_ptr != cont->saved_ec.fiber_ptr) {
            rb_raise(rb_eRuntimeError, "continuation called across fiber");
        }
    }
    rollback_ensure_stack(contval, th->ec->ensure_list, cont->ensure_array);

    cont->argc = argc;
    cont->value = make_passing_arg(argc, argv);

    cont_restore_0(cont, &contval);
    UNREACHABLE_RETURN(Qnil);
}

/*********/
/* fiber */
/*********/

/*
 *  Document-class: Fiber
 *
 *  Fibers are primitives for implementing light weight cooperative
 *  concurrency in Ruby. Basically they are a means of creating code blocks
 *  that can be paused and resumed, much like threads. The main difference
 *  is that they are never preempted and that the scheduling must be done by
 *  the programmer and not the VM.
 *
 *  As opposed to other stackless light weight concurrency models, each fiber
 *  comes with a stack.  This enables the fiber to be paused from deeply
 *  nested function calls within the fiber block.  See the ruby(1)
 *  manpage to configure the size of the fiber stack(s).
 *
 *  When a fiber is created it will not run automatically. Rather it must
 *  be explicitly asked to run using the Fiber#resume method.
 *  The code running inside the fiber can give up control by calling
 *  Fiber.yield in which case it yields control back to caller (the
 *  caller of the Fiber#resume).
 *
 *  Upon yielding or termination the Fiber returns the value of the last
 *  executed expression
 *
 *  For instance:
 *
 *    fiber = Fiber.new do
 *      Fiber.yield 1
 *      2
 *    end
 *
 *    puts fiber.resume
 *    puts fiber.resume
 *    puts fiber.resume
 *
 *  <em>produces</em>
 *
 *    1
 *    2
 *    FiberError: dead fiber called
 *
 *  The Fiber#resume method accepts an arbitrary number of parameters,
 *  if it is the first call to #resume then they will be passed as
 *  block arguments. Otherwise they will be the return value of the
 *  call to Fiber.yield
 *
 *  Example:
 *
 *    fiber = Fiber.new do |first|
 *      second = Fiber.yield first + 2
 *    end
 *
 *    puts fiber.resume 10
 *    puts fiber.resume 1_000_000
 *    puts fiber.resume "The fiber will be dead before I can cause trouble"
 *
 *  <em>produces</em>
 *
 *    12
 *    1000000
 *    FiberError: dead fiber called
 *
 *  == Non-blocking Fibers
 *
 *  The concept of <em>non-blocking fiber</em> was introduced in Ruby 3.0.
 *  A non-blocking fiber, when reaching a operation that would normally block
 *  the fiber (like <code>sleep</code>, or wait for another process or I/O)
 *  will yield control to other fibers and allow the <em>scheduler</em> to
 *  handle blocking and waking up (resuming) this fiber when it can proceed.
 *
 *  For a Fiber to behave as non-blocking, it need to be created in Fiber.new with
 *  <tt>blocking: false</tt> (which is the default), and Fiber.scheduler
 *  should be set with Fiber.set_scheduler. If Fiber.scheduler is not set in
 *  the current thread, blocking and non-blocking fibers' behavior is identical.
 *
 *  Ruby doesn't provide a scheduler class: it is expected to be implemented by
 *  the user and correspond to Fiber::SchedulerInterface.
 *
 *  There is also Fiber.schedule method, which is expected to immediately perform
 *  the given block in a non-blocking manner. Its actual implementation is up to
 *  the scheduler.
 *
 */

static const rb_data_type_t fiber_data_type = {
    "fiber",
    {fiber_mark, fiber_free, fiber_memsize, fiber_compact,},
    0, 0, RUBY_TYPED_FREE_IMMEDIATELY
};

static VALUE
fiber_alloc(VALUE klass)
{
    return TypedData_Wrap_Struct(klass, &fiber_data_type, 0);
}

static rb_fiber_t*
fiber_t_alloc(VALUE fiber_value, unsigned int blocking)
{
    rb_fiber_t *fiber;
    rb_thread_t *th = GET_THREAD();

    if (DATA_PTR(fiber_value) != 0) {
        rb_raise(rb_eRuntimeError, "cannot initialize twice");
    }

    THREAD_MUST_BE_RUNNING(th);
    fiber = ZALLOC(rb_fiber_t);
    fiber->cont.self = fiber_value;
    fiber->cont.type = FIBER_CONTEXT;
    fiber->blocking = blocking;
    cont_init(&fiber->cont, th);

    fiber->cont.saved_ec.fiber_ptr = fiber;
    rb_ec_clear_vm_stack(&fiber->cont.saved_ec);

    fiber->prev = NULL;

    /* fiber->status == 0 == CREATED
     * So that we don't need to set status: fiber_status_set(fiber, FIBER_CREATED); */
    VM_ASSERT(FIBER_CREATED_P(fiber));

    DATA_PTR(fiber_value) = fiber;

    return fiber;
}

static VALUE
fiber_initialize(VALUE self, VALUE proc, struct fiber_pool * fiber_pool, unsigned int blocking)
{
    rb_fiber_t *fiber = fiber_t_alloc(self, blocking);

    fiber->first_proc = proc;
    fiber->stack.base = NULL;
    fiber->stack.pool = fiber_pool;

    return self;
}

static void
fiber_prepare_stack(rb_fiber_t *fiber)
{
    rb_context_t *cont = &fiber->cont;
    rb_execution_context_t *sec = &cont->saved_ec;

    size_t vm_stack_size = 0;
    VALUE *vm_stack = fiber_initialize_coroutine(fiber, &vm_stack_size);

    /* initialize cont */
    cont->saved_vm_stack.ptr = NULL;
    rb_ec_initialize_vm_stack(sec, vm_stack, vm_stack_size / sizeof(VALUE));

    sec->tag = NULL;
    sec->local_storage = NULL;
    sec->local_storage_recursive_hash = Qnil;
    sec->local_storage_recursive_hash_for_trace = Qnil;
}

static struct fiber_pool *
rb_fiber_pool_default(VALUE pool)
{
    return &shared_fiber_pool;
}

/* :nodoc: */
static VALUE
rb_fiber_initialize_kw(int argc, VALUE* argv, VALUE self, int kw_splat)
{
    VALUE pool = Qnil;
    VALUE blocking = Qfalse;

    if (kw_splat != RB_NO_KEYWORDS) {
        VALUE options = Qnil;
        VALUE arguments[2] = {Qundef};

        argc = rb_scan_args_kw(kw_splat, argc, argv, ":", &options);
        rb_get_kwargs(options, fiber_initialize_keywords, 0, 2, arguments);

        if (arguments[0] != Qundef) {
            blocking = arguments[0];
        }

        if (arguments[1] != Qundef) {
            pool = arguments[1];
        }
    }

    return fiber_initialize(self, rb_block_proc(), rb_fiber_pool_default(pool), RTEST(blocking));
}

/*
 *  call-seq:
 *     Fiber.new(blocking: false) { |*args| ... } -> fiber
 *
 *  Creates new Fiber. Initially, the fiber is not running and can be resumed with
 *  #resume. Arguments to the first #resume call will be passed to the block:
 *
 *      f = Fiber.new do |initial|
 *         current = initial
 *         loop do
 *           puts "current: #{current.inspect}"
 *           current = Fiber.yield
 *         end
 *      end
 *      f.resume(100)     # prints: current: 100
 *      f.resume(1, 2, 3) # prints: current: [1, 2, 3]
 *      f.resume          # prints: current: nil
 *      # ... and so on ...
 *
 *  If <tt>blocking: false</tt> is passed to <tt>Fiber.new</tt>, _and_ current thread
 *  has a Fiber.scheduler defined, the Fiber becomes non-blocking (see "Non-blocking
 *  Fibers" section in class docs).
 */
static VALUE
rb_fiber_initialize(int argc, VALUE* argv, VALUE self)
{
    return rb_fiber_initialize_kw(argc, argv, self, rb_keyword_given_p());
}

VALUE
rb_fiber_new(rb_block_call_func_t func, VALUE obj)
{
    return fiber_initialize(fiber_alloc(rb_cFiber), rb_proc_new(func, obj), rb_fiber_pool_default(Qnil), 1);
}

static VALUE
rb_fiber_s_schedule_kw(int argc, VALUE* argv, int kw_splat)
{
    rb_thread_t * th = GET_THREAD();
    VALUE scheduler = th->scheduler;
    VALUE fiber = Qnil;

    if (scheduler != Qnil) {
        fiber = rb_funcall_passing_block_kw(scheduler, rb_intern("fiber"), argc, argv, kw_splat);
    }
    else {
        rb_raise(rb_eRuntimeError, "No scheduler is available!");
    }

    return fiber;
}

/*
 *  call-seq:
 *     Fiber.schedule { |*args| ... } -> fiber
 *
 *  The method is <em>expected</em> to immediately run the provided block of code in a
 *  separate non-blocking fiber.
 *
 *     puts "Go to sleep!"
 *
 *     Fiber.set_scheduler(MyScheduler.new)
 *
 *     Fiber.schedule do
 *       puts "Going to sleep"
 *       sleep(1)
 *       puts "I slept well"
 *     end
 *
 *     puts "Wakey-wakey, sleepyhead"
 *
 *  Assuming MyScheduler is properly implemented, this program will produce:
 *
 *     Go to sleep!
 *     Going to sleep
 *     Wakey-wakey, sleepyhead
 *     ...1 sec pause here...
 *     I slept well
 *
 *  ...e.g. on the first blocking operation inside the Fiber (<tt>sleep(1)</tt>),
 *  the control is yielded to the outside code (main fiber), and <em>at the end
 *  of that execution</em>, the scheduler takes care of properly resuming all the
 *  blocked fibers.
 *
 *  Note that the behavior described above is how the method is <em>expected</em>
 *  to behave, actual behavior is up to the current scheduler's implementation of
 *  Fiber::SchedulerInterface#fiber method. Ruby doesn't enforce this method to
 *  behave in any particular way.
 *
 *  If the scheduler is not set, the method raises
 *  <tt>RuntimeError (No scheduler is available!)</tt>.
 *
 */
static VALUE
rb_fiber_s_schedule(int argc, VALUE *argv, VALUE obj)
{
    return rb_fiber_s_schedule_kw(argc, argv, rb_keyword_given_p());
}

/*
 *  call-seq:
 *     Fiber.scheduler -> obj or nil
 *
 *  Returns the Fiber scheduler, that was last set for the current thread with Fiber.set_scheduler.
 *  Returns +nil+ if no scheduler is set (which is the default), and non-blocking fibers'
 #  behavior is the same as blocking.
 *  (see "Non-blocking fibers" section in class docs for details about the scheduler concept).
 *
 */
static VALUE
rb_fiber_s_scheduler(VALUE klass)
{
    return rb_fiber_scheduler_get();
}

/*
 *  call-seq:
 *     Fiber.current_scheduler -> obj or nil
 *
 *  Returns the Fiber scheduler, that was last set for the current thread with Fiber.set_scheduler
 *  if and only if the current fiber is non-blocking.
 *
 */
static VALUE
rb_fiber_current_scheduler(VALUE klass)
{
    return rb_fiber_scheduler_current();
}

/*
 *  call-seq:
 *     Fiber.set_scheduler(scheduler) -> scheduler
 *
 *  Sets the Fiber scheduler for the current thread. If the scheduler is set, non-blocking
 *  fibers (created by Fiber.new with <tt>blocking: false</tt>, or by Fiber.schedule)
 *  call that scheduler's hook methods on potentially blocking operations, and the current
 *  thread will call scheduler's +close+ method on finalization (allowing the scheduler to
 *  properly manage all non-finished fibers).
 *
 *  +scheduler+ can be an object of any class corresponding to Fiber::SchedulerInterface. Its
 *  implementation is up to the user.
 *
 *  See also the "Non-blocking fibers" section in class docs.
 *
 */
static VALUE
rb_fiber_set_scheduler(VALUE klass, VALUE scheduler)
{
    return rb_fiber_scheduler_set(scheduler);
}

NORETURN(static void rb_fiber_terminate(rb_fiber_t *fiber, int need_interrupt, VALUE err));

void
rb_fiber_start(rb_fiber_t *fiber)
{
    rb_thread_t * volatile th = fiber->cont.saved_ec.thread_ptr;

    rb_proc_t *proc;
    enum ruby_tag_type state;
    int need_interrupt = TRUE;

    VM_ASSERT(th->ec == GET_EC());
    VM_ASSERT(FIBER_RESUMED_P(fiber));

    if (fiber->blocking) {
        th->blocking += 1;
    }

    EC_PUSH_TAG(th->ec);
    if ((state = EC_EXEC_TAG()) == TAG_NONE) {
        rb_context_t *cont = &VAR_FROM_MEMORY(fiber)->cont;
        int argc;
        const VALUE *argv, args = cont->value;
        GetProcPtr(fiber->first_proc, proc);
        argv = (argc = cont->argc) > 1 ? RARRAY_CONST_PTR(args) : &args;
        cont->value = Qnil;
        th->ec->errinfo = Qnil;
        th->ec->root_lep = rb_vm_proc_local_ep(fiber->first_proc);
        th->ec->root_svar = Qfalse;

        EXEC_EVENT_HOOK(th->ec, RUBY_EVENT_FIBER_SWITCH, th->self, 0, 0, 0, Qnil);
        cont->value = rb_vm_invoke_proc(th->ec, proc, argc, argv, cont->kw_splat, VM_BLOCK_HANDLER_NONE);
    }
    EC_POP_TAG();

    VALUE err = Qfalse;
    if (state) {
        err = th->ec->errinfo;
        VM_ASSERT(FIBER_RESUMED_P(fiber));

        if (state == TAG_RAISE) {
            // noop...
        }
        else if (state == TAG_FATAL) {
            rb_threadptr_pending_interrupt_enque(th, err);
        }
        else {
            err = rb_vm_make_jump_tag_but_local_jump(state, err);
        }
        need_interrupt = TRUE;
    }

    rb_fiber_terminate(fiber, need_interrupt, err);
}

static rb_fiber_t *
root_fiber_alloc(rb_thread_t *th)
{
    VALUE fiber_value = fiber_alloc(rb_cFiber);
    rb_fiber_t *fiber = th->ec->fiber_ptr;

    VM_ASSERT(DATA_PTR(fiber_value) == NULL);
    VM_ASSERT(fiber->cont.type == FIBER_CONTEXT);
    VM_ASSERT(fiber->status == FIBER_RESUMED);

    th->root_fiber = fiber;
    DATA_PTR(fiber_value) = fiber;
    fiber->cont.self = fiber_value;

    coroutine_initialize_main(&fiber->context);

    return fiber;
}

void
rb_threadptr_root_fiber_setup(rb_thread_t *th)
{
    rb_fiber_t *fiber = ruby_mimmalloc(sizeof(rb_fiber_t));
    if (!fiber) {
        rb_bug("%s", strerror(errno)); /* ... is it possible to call rb_bug here? */
    }
    MEMZERO(fiber, rb_fiber_t, 1);
    fiber->cont.type = FIBER_CONTEXT;
    fiber->cont.saved_ec.fiber_ptr = fiber;
    fiber->cont.saved_ec.thread_ptr = th;
    fiber->blocking = 1;
    fiber_status_set(fiber, FIBER_RESUMED); /* skip CREATED */
    th->ec = &fiber->cont.saved_ec;
    // This skips mjit_cont_new for the initial thread because mjit_enabled is always false
    // at this point. mjit_init calls rb_fiber_init_mjit_cont again for this root_fiber.
    rb_fiber_init_mjit_cont(fiber);
}

void
rb_threadptr_root_fiber_release(rb_thread_t *th)
{
    if (th->root_fiber) {
        /* ignore. A root fiber object will free th->ec */
    }
    else {
        rb_execution_context_t *ec = GET_EC();

        VM_ASSERT(th->ec->fiber_ptr->cont.type == FIBER_CONTEXT);
        VM_ASSERT(th->ec->fiber_ptr->cont.self == 0);

        if (th->ec == ec) {
            rb_ractor_set_current_ec(th->ractor, NULL);
        }
        fiber_free(th->ec->fiber_ptr);
        th->ec = NULL;
    }
}

void
rb_threadptr_root_fiber_terminate(rb_thread_t *th)
{
    rb_fiber_t *fiber = th->ec->fiber_ptr;

    fiber->status = FIBER_TERMINATED;

    // The vm_stack is `alloca`ed on the thread stack, so it's gone too:
    rb_ec_clear_vm_stack(th->ec);
}

static inline rb_fiber_t*
fiber_current(void)
{
    rb_execution_context_t *ec = GET_EC();
    if (ec->fiber_ptr->cont.self == 0) {
        root_fiber_alloc(rb_ec_thread_ptr(ec));
    }
    return ec->fiber_ptr;
}

static inline rb_fiber_t*
return_fiber(bool terminate)
{
    rb_fiber_t *fiber = fiber_current();
    rb_fiber_t *prev = fiber->prev;

    if (prev) {
        fiber->prev = NULL;
        prev->resuming_fiber = NULL;
        return prev;
    }
    else {
        if (!terminate) {
            rb_raise(rb_eFiberError, "attempt to yield on a not resumed fiber");
        }

        rb_thread_t *th = GET_THREAD();
        rb_fiber_t *root_fiber = th->root_fiber;

        VM_ASSERT(root_fiber != NULL);

        // search resuming fiber
        for (fiber = root_fiber; fiber->resuming_fiber; fiber = fiber->resuming_fiber) {
        }

        return fiber;
    }
}

VALUE
rb_fiber_current(void)
{
    return fiber_current()->cont.self;
}

// Prepare to execute next_fiber on the given thread.
static inline void
fiber_store(rb_fiber_t *next_fiber, rb_thread_t *th)
{
    rb_fiber_t *fiber;

    if (th->ec->fiber_ptr != NULL) {
        fiber = th->ec->fiber_ptr;
    }
    else {
        /* create root fiber */
        fiber = root_fiber_alloc(th);
    }

    if (FIBER_CREATED_P(next_fiber)) {
        fiber_prepare_stack(next_fiber);
    }

    VM_ASSERT(FIBER_RESUMED_P(fiber) || FIBER_TERMINATED_P(fiber));
    VM_ASSERT(FIBER_RUNNABLE_P(next_fiber));

    if (FIBER_RESUMED_P(fiber)) fiber_status_set(fiber, FIBER_SUSPENDED);

    fiber_status_set(next_fiber, FIBER_RESUMED);
    fiber_setcontext(next_fiber, fiber);
}

static inline VALUE
fiber_switch(rb_fiber_t *fiber, int argc, const VALUE *argv, int kw_splat, rb_fiber_t *resuming_fiber, bool yielding)
{
    VALUE value;
    rb_context_t *cont = &fiber->cont;
    rb_thread_t *th = GET_THREAD();

    /* make sure the root_fiber object is available */
    if (th->root_fiber == NULL) root_fiber_alloc(th);

    if (th->ec->fiber_ptr == fiber) {
        /* ignore fiber context switch
         * because destination fiber is the same as current fiber
         */
        return make_passing_arg(argc, argv);
    }

    if (cont_thread_value(cont) != th->self) {
        rb_raise(rb_eFiberError, "fiber called across threads");
    }

    if (FIBER_TERMINATED_P(fiber)) {
        value = rb_exc_new2(rb_eFiberError, "dead fiber called");

        if (!FIBER_TERMINATED_P(th->ec->fiber_ptr)) {
            rb_exc_raise(value);
            VM_UNREACHABLE(fiber_switch);
        }
        else {
            /* th->ec->fiber_ptr is also dead => switch to root fiber */
            /* (this means we're being called from rb_fiber_terminate, */
            /* and the terminated fiber's return_fiber() is already dead) */
            VM_ASSERT(FIBER_SUSPENDED_P(th->root_fiber));

            cont = &th->root_fiber->cont;
            cont->argc = -1;
            cont->value = value;

            fiber_setcontext(th->root_fiber, th->ec->fiber_ptr);

            VM_UNREACHABLE(fiber_switch);
        }
    }

    VM_ASSERT(FIBER_RUNNABLE_P(fiber));

    rb_fiber_t *current_fiber = fiber_current();

    VM_ASSERT(!current_fiber->resuming_fiber);

    if (resuming_fiber) {
        current_fiber->resuming_fiber = resuming_fiber;
        fiber->prev = fiber_current();
        fiber->yielding = 0;
    }

    VM_ASSERT(!current_fiber->yielding);
    if (yielding) {
        current_fiber->yielding = 1;
    }

    if (current_fiber->blocking) {
        th->blocking -= 1;
    }

    cont->argc = argc;
    cont->kw_splat = kw_splat;
    cont->value = make_passing_arg(argc, argv);

    fiber_store(fiber, th);

    // We cannot free the stack until the pthread is joined:
#ifndef COROUTINE_PTHREAD_CONTEXT
    if (resuming_fiber && FIBER_TERMINATED_P(fiber)) {
        fiber_stack_release(fiber);
    }
#endif

    if (fiber_current()->blocking) {
        th->blocking += 1;
    }

    RUBY_VM_CHECK_INTS(th->ec);

    EXEC_EVENT_HOOK(th->ec, RUBY_EVENT_FIBER_SWITCH, th->self, 0, 0, 0, Qnil);

    current_fiber = th->ec->fiber_ptr;
    value = current_fiber->cont.value;
    if (current_fiber->cont.argc == -1) rb_exc_raise(value);
    return value;
}

VALUE
rb_fiber_transfer(VALUE fiber_value, int argc, const VALUE *argv)
{
    return fiber_switch(fiber_ptr(fiber_value), argc, argv, RB_NO_KEYWORDS, NULL, false);
}

/*
 *  call-seq:
 *     fiber.blocking? -> true or false
 *
 *  Returns +true+ if +fiber+ is blocking and +false+ otherwise.
 *  Fiber is non-blocking if it was created via passing <tt>blocking: false</tt>
 *  to Fiber.new, or via Fiber.schedule.
 *
 *  Note that, even if the method returns +false+, the fiber behaves differently
 *  only if Fiber.scheduler is set in the current thread.
 *
 *  See the "Non-blocking fibers" section in class docs for details.
 *
 */
VALUE
rb_fiber_blocking_p(VALUE fiber)
{
    return RBOOL(fiber_ptr(fiber)->blocking != 0);
}

/*
 *  call-seq:
 *     Fiber.blocking? -> false or 1
 *
 *  Returns +false+ if the current fiber is non-blocking.
 *  Fiber is non-blocking if it was created via passing <tt>blocking: false</tt>
 *  to Fiber.new, or via Fiber.schedule.
 *
 *  If the current Fiber is blocking, the method returns 1.
 *  Future developments may allow for situations where larger integers
 *  could be returned.
 *
 *  Note that, even if the method returns +false+, Fiber behaves differently
 *  only if Fiber.scheduler is set in the current thread.
 *
 *  See the "Non-blocking fibers" section in class docs for details.
 *
 */
static VALUE
rb_fiber_s_blocking_p(VALUE klass)
{
    rb_thread_t *thread = GET_THREAD();
    unsigned blocking = thread->blocking;

    if (blocking == 0)
        return Qfalse;

    return INT2NUM(blocking);
}

void
rb_fiber_close(rb_fiber_t *fiber)
{
    fiber_status_set(fiber, FIBER_TERMINATED);
}

static void
rb_fiber_terminate(rb_fiber_t *fiber, int need_interrupt, VALUE error)
{
    VALUE value = fiber->cont.value;

    VM_ASSERT(FIBER_RESUMED_P(fiber));
    rb_fiber_close(fiber);

    fiber->cont.machine.stack = NULL;
    fiber->cont.machine.stack_size = 0;

    rb_fiber_t *next_fiber = return_fiber(true);

    if (need_interrupt) RUBY_VM_SET_INTERRUPT(&next_fiber->cont.saved_ec);

    if (RTEST(error))
        fiber_switch(next_fiber, -1, &error, RB_NO_KEYWORDS, NULL, false);
    else
        fiber_switch(next_fiber, 1, &value, RB_NO_KEYWORDS, NULL, false);
    ruby_stop(0);
}

static VALUE
fiber_resume_kw(rb_fiber_t *fiber, int argc, const VALUE *argv, int kw_splat)
{
    rb_fiber_t *current_fiber = fiber_current();

    if (argc == -1 && FIBER_CREATED_P(fiber)) {
        rb_raise(rb_eFiberError, "cannot raise exception on unborn fiber");
    }
    else if (FIBER_TERMINATED_P(fiber)) {
        rb_raise(rb_eFiberError, "attempt to resume a terminated fiber");
    }
    else if (fiber == current_fiber) {
        rb_raise(rb_eFiberError, "attempt to resume the current fiber");
    }
    else if (fiber->prev != NULL) {
        rb_raise(rb_eFiberError, "attempt to resume a resumed fiber (double resume)");
    }
    else if (fiber->resuming_fiber) {
        rb_raise(rb_eFiberError, "attempt to resume a resuming fiber");
    }
    else if (fiber->prev == NULL &&
             (!fiber->yielding && fiber->status != FIBER_CREATED)) {
        rb_raise(rb_eFiberError, "attempt to resume a transferring fiber");
    }

    VALUE result = fiber_switch(fiber, argc, argv, kw_splat, fiber, false);

    return result;
}

VALUE
rb_fiber_resume_kw(VALUE self, int argc, const VALUE *argv, int kw_splat)
{
    return fiber_resume_kw(fiber_ptr(self), argc, argv, kw_splat);
}

VALUE
rb_fiber_resume(VALUE self, int argc, const VALUE *argv)
{
    return fiber_resume_kw(fiber_ptr(self), argc, argv, RB_NO_KEYWORDS);
}

VALUE
rb_fiber_yield_kw(int argc, const VALUE *argv, int kw_splat)
{
    return fiber_switch(return_fiber(false), argc, argv, kw_splat, NULL, true);
}

VALUE
rb_fiber_yield(int argc, const VALUE *argv)
{
    return fiber_switch(return_fiber(false), argc, argv, RB_NO_KEYWORDS, NULL, true);
}

void
rb_fiber_reset_root_local_storage(rb_thread_t *th)
{
    if (th->root_fiber && th->root_fiber != th->ec->fiber_ptr) {
        th->ec->local_storage = th->root_fiber->cont.saved_ec.local_storage;
    }
}

/*
 *  call-seq:
 *     fiber.alive? -> true or false
 *
 *  Returns true if the fiber can still be resumed (or transferred
 *  to). After finishing execution of the fiber block this method will
 *  always return +false+.
 */
VALUE
rb_fiber_alive_p(VALUE fiber_value)
{
    return FIBER_TERMINATED_P(fiber_ptr(fiber_value)) ? Qfalse : Qtrue;
}

/*
 *  call-seq:
 *     fiber.resume(args, ...) -> obj
 *
 *  Resumes the fiber from the point at which the last Fiber.yield was
 *  called, or starts running it if it is the first call to
 *  #resume. Arguments passed to resume will be the value of the
 *  Fiber.yield expression or will be passed as block parameters to
 *  the fiber's block if this is the first #resume.
 *
 *  Alternatively, when resume is called it evaluates to the arguments passed
 *  to the next Fiber.yield statement inside the fiber's block
 *  or to the block value if it runs to completion without any
 *  Fiber.yield
 */
static VALUE
rb_fiber_m_resume(int argc, VALUE *argv, VALUE fiber)
{
    return rb_fiber_resume_kw(fiber, argc, argv, rb_keyword_given_p());
}

/*
 *  call-seq:
 *     fiber.backtrace -> array
 *     fiber.backtrace(start) -> array
 *     fiber.backtrace(start, count) -> array
 *     fiber.backtrace(start..end) -> array
 *
 *  Returns the current execution stack of the fiber. +start+, +count+ and +end+ allow
 *  to select only parts of the backtrace.
 *
 *     def level3
 *       Fiber.yield
 *     end
 *
 *     def level2
 *       level3
 *     end
 *
 *     def level1
 *       level2
 *     end
 *
 *     f = Fiber.new { level1 }
 *
 *     # It is empty before the fiber started
 *     f.backtrace
 *     #=> []
 *
 *     f.resume
 *
 *     f.backtrace
 *     #=> ["test.rb:2:in `yield'", "test.rb:2:in `level3'", "test.rb:6:in `level2'", "test.rb:10:in `level1'", "test.rb:13:in `block in <main>'"]
 *     p f.backtrace(1) # start from the item 1
 *     #=> ["test.rb:2:in `level3'", "test.rb:6:in `level2'", "test.rb:10:in `level1'", "test.rb:13:in `block in <main>'"]
 *     p f.backtrace(2, 2) # start from item 2, take 2
 *     #=> ["test.rb:6:in `level2'", "test.rb:10:in `level1'"]
 *     p f.backtrace(1..3) # take items from 1 to 3
 *     #=> ["test.rb:2:in `level3'", "test.rb:6:in `level2'", "test.rb:10:in `level1'"]
 *
 *     f.resume
 *
 *     # It is nil after the fiber is finished
 *     f.backtrace
 *     #=> nil
 *
 */
static VALUE
rb_fiber_backtrace(int argc, VALUE *argv, VALUE fiber)
{
    return rb_vm_backtrace(argc, argv, &fiber_ptr(fiber)->cont.saved_ec);
}

/*
 *  call-seq:
 *     fiber.backtrace_locations -> array
 *     fiber.backtrace_locations(start) -> array
 *     fiber.backtrace_locations(start, count) -> array
 *     fiber.backtrace_locations(start..end) -> array
 *
 *  Like #backtrace, but returns each line of the execution stack as a
 *  Thread::Backtrace::Location. Accepts the same arguments as #backtrace.
 *
 *    f = Fiber.new { Fiber.yield }
 *    f.resume
 *    loc = f.backtrace_locations.first
 *    loc.label  #=> "yield"
 *    loc.path   #=> "test.rb"
 *    loc.lineno #=> 1
 *
 *
 */
static VALUE
rb_fiber_backtrace_locations(int argc, VALUE *argv, VALUE fiber)
{
    return rb_vm_backtrace_locations(argc, argv, &fiber_ptr(fiber)->cont.saved_ec);
}

/*
 *  call-seq:
 *     fiber.transfer(args, ...) -> obj
 *
 *  Transfer control to another fiber, resuming it from where it last
 *  stopped or starting it if it was not resumed before. The calling
 *  fiber will be suspended much like in a call to
 *  Fiber.yield.
 *
 *  The fiber which receives the transfer call treats it much like
 *  a resume call. Arguments passed to transfer are treated like those
 *  passed to resume.
 *
 *  The two style of control passing to and from fiber (one is #resume and
 *  Fiber::yield, another is #transfer to and from fiber) can't be freely
 *  mixed.
 *
 *  * If the Fiber's lifecycle had started with transfer, it will never
 *    be able to yield or be resumed control passing, only
 *    finish or transfer back. (It still can resume other fibers that
 *    are allowed to be resumed.)
 *  * If the Fiber's lifecycle had started with resume, it can yield
 *    or transfer to another Fiber, but can receive control back only
 *    the way compatible with the way it was given away: if it had
 *    transferred, it only can be transferred back, and if it had
 *    yielded, it only can be resumed back. After that, it again can
 *    transfer or yield.
 *
 *  If those rules are broken FiberError is raised.
 *
 *  For an individual Fiber design, yield/resume is easier to use
 *  (the Fiber just gives away control, it doesn't need to think
 *  about who the control is given to), while transfer is more flexible
 *  for complex cases, allowing to build arbitrary graphs of Fibers
 *  dependent on each other.
 *
 *
 *  Example:
 *
 *     manager = nil # For local var to be visible inside worker block
 *
 *     # This fiber would be started with transfer
 *     # It can't yield, and can't be resumed
 *     worker = Fiber.new { |work|
 *       puts "Worker: starts"
 *       puts "Worker: Performed #{work.inspect}, transferring back"
 *       # Fiber.yield     # this would raise FiberError: attempt to yield on a not resumed fiber
 *       # manager.resume  # this would raise FiberError: attempt to resume a resumed fiber (double resume)
 *       manager.transfer(work.capitalize)
 *     }
 *
 *     # This fiber would be started with resume
 *     # It can yield or transfer, and can be transferred
 *     # back or resumed
 *     manager = Fiber.new {
 *       puts "Manager: starts"
 *       puts "Manager: transferring 'something' to worker"
 *       result = worker.transfer('something')
 *       puts "Manager: worker returned #{result.inspect}"
 *       # worker.resume    # this would raise FiberError: attempt to resume a transferring fiber
 *       Fiber.yield        # this is OK, the fiber transferred from and to, now it can yield
 *       puts "Manager: finished"
 *     }
 *
 *     puts "Starting the manager"
 *     manager.resume
 *     puts "Resuming the manager"
 *     # manager.transfer  # this would raise FiberError: attempt to transfer to a yielding fiber
 *     manager.resume
 *
 *  <em>produces</em>
 *
 *     Starting the manager
 *     Manager: starts
 *     Manager: transferring 'something' to worker
 *     Worker: starts
 *     Worker: Performed "something", transferring back
 *     Manager: worker returned "Something"
 *     Resuming the manager
 *     Manager: finished
 *
 */
static VALUE
rb_fiber_m_transfer(int argc, VALUE *argv, VALUE self)
{
    return rb_fiber_transfer_kw(self, argc, argv, rb_keyword_given_p());
}

static VALUE
fiber_transfer_kw(rb_fiber_t *fiber, int argc, const VALUE *argv, int kw_splat)
{
  if (fiber->resuming_fiber) {
      rb_raise(rb_eFiberError, "attempt to transfer to a resuming fiber");
  }

  if (fiber->yielding) {
      rb_raise(rb_eFiberError, "attempt to transfer to a yielding fiber");
  }

  return fiber_switch(fiber, argc, argv, kw_splat, NULL, false);
}

VALUE
rb_fiber_transfer_kw(VALUE self, int argc, const VALUE *argv, int kw_splat)
{
    return fiber_transfer_kw(fiber_ptr(self), argc, argv, kw_splat);
}

/*
 *  call-seq:
 *     Fiber.yield(args, ...) -> obj
 *
 *  Yields control back to the context that resumed the fiber, passing
 *  along any arguments that were passed to it. The fiber will resume
 *  processing at this point when #resume is called next.
 *  Any arguments passed to the next #resume will be the value that
 *  this Fiber.yield expression evaluates to.
 */
static VALUE
rb_fiber_s_yield(int argc, VALUE *argv, VALUE klass)
{
    return rb_fiber_yield_kw(argc, argv, rb_keyword_given_p());
}

static VALUE
fiber_raise(rb_fiber_t *fiber, int argc, const VALUE *argv)
{
    VALUE exception = rb_make_exception(argc, argv);

    if (fiber->resuming_fiber) {
        rb_raise(rb_eFiberError, "attempt to raise a resuming fiber");
    }
    else if (FIBER_SUSPENDED_P(fiber) && !fiber->yielding) {
        return fiber_transfer_kw(fiber, -1, &exception, RB_NO_KEYWORDS);
    }
    else {
        return fiber_resume_kw(fiber, -1, &exception, RB_NO_KEYWORDS);
    }
}

VALUE
rb_fiber_raise(VALUE fiber, int argc, const VALUE *argv)
{
    return fiber_raise(fiber_ptr(fiber), argc, argv);
}

/*
 *  call-seq:
 *     fiber.raise                                 -> obj
 *     fiber.raise(string)                         -> obj
 *     fiber.raise(exception [, string [, array]]) -> obj
 *
 *  Raises an exception in the fiber at the point at which the last
 *  +Fiber.yield+ was called. If the fiber has not been started or has
 *  already run to completion, raises +FiberError+. If the fiber is
 *  yielding, it is resumed. If it is transferring, it is transferred into.
 *  But if it is resuming, raises +FiberError+.
 *
 *  With no arguments, raises a +RuntimeError+. With a single +String+
 *  argument, raises a +RuntimeError+ with the string as a message.  Otherwise,
 *  the first parameter should be the name of an +Exception+ class (or an
 *  object that returns an +Exception+ object when sent an +exception+
 *  message). The optional second parameter sets the message associated with
 *  the exception, and the third parameter is an array of callback information.
 *  Exceptions are caught by the +rescue+ clause of <code>begin...end</code>
 *  blocks.
 */
static VALUE
rb_fiber_m_raise(int argc, VALUE *argv, VALUE self)
{
    return rb_fiber_raise(self, argc, argv);
}

/*
 *  call-seq:
 *     Fiber.current -> fiber
 *
 *  Returns the current fiber. If you are not running in the context of
 *  a fiber this method will return the root fiber.
 */
static VALUE
rb_fiber_s_current(VALUE klass)
{
    return rb_fiber_current();
}

static VALUE
fiber_to_s(VALUE fiber_value)
{
    const rb_fiber_t *fiber = fiber_ptr(fiber_value);
    const rb_proc_t *proc;
    char status_info[0x20];

    if (fiber->resuming_fiber) {
        snprintf(status_info, 0x20, " (%s by resuming)", fiber_status_name(fiber->status));
    }
    else {
        snprintf(status_info, 0x20, " (%s)", fiber_status_name(fiber->status));
    }

    if (!rb_obj_is_proc(fiber->first_proc)) {
        VALUE str = rb_any_to_s(fiber_value);
        strlcat(status_info, ">", sizeof(status_info));
        rb_str_set_len(str, RSTRING_LEN(str)-1);
        rb_str_cat_cstr(str, status_info);
        return str;
    }
    GetProcPtr(fiber->first_proc, proc);
    return rb_block_to_s(fiber_value, &proc->block, status_info);
}

#ifdef HAVE_WORKING_FORK
void
rb_fiber_atfork(rb_thread_t *th)
{
    if (th->root_fiber) {
        if (&th->root_fiber->cont.saved_ec != th->ec) {
            th->root_fiber = th->ec->fiber_ptr;
        }
        th->root_fiber->prev = 0;
    }
}
#endif

#ifdef RB_EXPERIMENTAL_FIBER_POOL
static void
fiber_pool_free(void *ptr)
{
    struct fiber_pool * fiber_pool = ptr;
    RUBY_FREE_ENTER("fiber_pool");

    fiber_pool_free_allocations(fiber_pool->allocations);
    ruby_xfree(fiber_pool);

    RUBY_FREE_LEAVE("fiber_pool");
}

static size_t
fiber_pool_memsize(const void *ptr)
{
    const struct fiber_pool * fiber_pool = ptr;
    size_t size = sizeof(*fiber_pool);

    size += fiber_pool->count * fiber_pool->size;

    return size;
}

static const rb_data_type_t FiberPoolDataType = {
    "fiber_pool",
    {NULL, fiber_pool_free, fiber_pool_memsize,},
    0, 0, RUBY_TYPED_FREE_IMMEDIATELY
};

static VALUE
fiber_pool_alloc(VALUE klass)
{
    struct fiber_pool * fiber_pool = RB_ALLOC(struct fiber_pool);

    return TypedData_Wrap_Struct(klass, &FiberPoolDataType, fiber_pool);
}

static VALUE
rb_fiber_pool_initialize(int argc, VALUE* argv, VALUE self)
{
    rb_thread_t *th = GET_THREAD();
    VALUE size = Qnil, count = Qnil, vm_stack_size = Qnil;
    struct fiber_pool * fiber_pool = NULL;

    // Maybe these should be keyword arguments.
    rb_scan_args(argc, argv, "03", &size, &count, &vm_stack_size);

    if (NIL_P(size)) {
        size = INT2NUM(th->vm->default_params.fiber_machine_stack_size);
    }

    if (NIL_P(count)) {
        count = INT2NUM(128);
    }

    if (NIL_P(vm_stack_size)) {
        vm_stack_size = INT2NUM(th->vm->default_params.fiber_vm_stack_size);
    }

    TypedData_Get_Struct(self, struct fiber_pool, &FiberPoolDataType, fiber_pool);

    fiber_pool_initialize(fiber_pool, NUM2SIZET(size), NUM2SIZET(count), NUM2SIZET(vm_stack_size));

    return self;
}
#endif

/*
 *  Document-class: FiberError
 *
 *  Raised when an invalid operation is attempted on a Fiber, in
 *  particular when attempting to call/resume a dead fiber,
 *  attempting to yield from the root fiber, or calling a fiber across
 *  threads.
 *
 *     fiber = Fiber.new{}
 *     fiber.resume #=> nil
 *     fiber.resume #=> FiberError: dead fiber called
 */

/*
 *  Document-class: Fiber::SchedulerInterface
 *
 *  This is not an existing class, but documentation of the interface that Scheduler
 *  object should comply to in order to be used as argument to Fiber.scheduler and handle non-blocking
 *  fibers. See also the "Non-blocking fibers" section in Fiber class docs for explanations
 *  of some concepts.
 *
 *  Scheduler's behavior and usage are expected to be as follows:
 *
 *  * When the execution in the non-blocking Fiber reaches some blocking operation (like
 *    sleep, wait for a process, or a non-ready I/O), it calls some of the scheduler's
 *    hook methods, listed below.
 *  * Scheduler somehow registers what the current fiber is waiting on, and yields control
 *    to other fibers with Fiber.yield (so the fiber would be suspended while expecting its
 *    wait to end, and other fibers in the same thread can perform)
 *  * At the end of the current thread execution, the scheduler's method #close is called
 *  * The scheduler runs into a wait loop, checking all the blocked fibers (which it has
 *    registered on hook calls) and resuming them when the awaited resource is ready
 *    (e.g. I/O ready or sleep time elapsed).
 *
 *  A typical implementation would probably rely for this closing loop on a gem like
 *  EventMachine[https://github.com/eventmachine/eventmachine] or
 *  Async[https://github.com/socketry/async].
 *
 *  This way concurrent execution will be achieved transparently for every
 *  individual Fiber's code.
 *
 *  Hook methods are:
 *
 *  * #io_wait, #io_read, and #io_write
 *  * #process_wait
 *  * #kernel_sleep
 *  * #timeout_after
 *  * #address_resolve
 *  * #block and #unblock
 *  * (the list is expanded as Ruby developers make more methods having non-blocking calls)
 *
 *  When not specified otherwise, the hook implementations are mandatory: if they are not
 *  implemented, the methods trying to call hook will fail. To provide backward compatibility,
 *  in the future hooks will be optional (if they are not implemented, due to the scheduler
 *  being created for the older Ruby version, the code which needs this hook will not fail,
 *  and will just behave in a blocking fashion).
 *
 *  It is also strongly recommended that the scheduler implements the #fiber method, which is
 *  delegated to by Fiber.schedule.
 *
 *  Sample _toy_ implementation of the scheduler can be found in Ruby's code, in
 *  <tt>test/fiber/scheduler.rb</tt>
 *
 */

#if 0 /* for RDoc */
/*
 *
 *  Document-method: Fiber::SchedulerInterface#close
 *
 *  Called when the current thread exits. The scheduler is expected to implement this
 *  method in order to allow all waiting fibers to finalize their execution.
 *
 *  The suggested pattern is to implement the main event loop in the #close method.
 *
 */
static VALUE
rb_fiber_scheduler_interface_close(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#process_wait
 *  call-seq: process_wait(pid, flags)
 *
 *  Invoked by Process::Status.wait in order to wait for a specified process.
 *  See that method description for arguments description.
 *
 *  Suggested minimal implementation:
 *
 *      Thread.new do
 *        Process::Status.wait(pid, flags)
 *      end.value
 *
 *  This hook is optional: if it is not present in the current scheduler,
 *  Process::Status.wait will behave as a blocking method.
 *
 *  Expected to return a Process::Status instance.
 */
static VALUE
rb_fiber_scheduler_interface_process_wait(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#io_wait
 *  call-seq: io_wait(io, events, timeout)
 *
 *  Invoked by IO#wait, IO#wait_readable, IO#wait_writable to ask whether the
 *  specified descriptor is ready for specified events within
 *  the specified +timeout+.
 *
 *  +events+ is a bit mask of <tt>IO::READABLE</tt>, <tt>IO::WRITABLE</tt>, and
 *  <tt>IO::PRIORITY</tt>.
 *
 *  Suggested implementation should register which Fiber is waiting for which
 *  resources and immediately calling Fiber.yield to pass control to other
 *  fibers. Then, in the #close method, the scheduler might dispatch all the
 *  I/O resources to fibers waiting for it.
 *
 *  Expected to return the subset of events that are ready immediately.
 *
 */
static VALUE
rb_fiber_scheduler_interface_io_wait(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#io_read
 *  call-seq: io_read(io, buffer, length) -> read length or -errno
 *
 *  Invoked by IO#read to read +length+ bytes from +io+ into a specified
 *  +buffer+ (see IO::Buffer).
 *
 *  The +length+ argument is the "minimum length to be read".
 *  If the IO buffer size is 8KiB, but the +length+ is +1024+ (1KiB), up to
 *  8KiB might be read, but at least 1KiB will be.
 *  Generally, the only case where less data than +length+ will be read is if
 *  there is an error reading the data.
 *
 *  Specifying a +length+ of 0 is valid and means try reading at least once
 *  and return any available data.
 *
 *  Suggested implementation should try to read from +io+ in a non-blocking
 *  manner and call #io_wait if the +io+ is not ready (which will yield control
 *  to other fibers).
 *
 *  See IO::Buffer for an interface available to return data.
 *
 *  Expected to return number of bytes read, or, in case of an error, <tt>-errno</tt>
 *  (negated number corresponding to system's error code).
 *
 *  The method should be considered _experimental_.
 */
static VALUE
rb_fiber_scheduler_interface_io_read(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#io_write
 *  call-seq: io_write(io, buffer, length) -> written length or -errno
 *
 *  Invoked by IO#write to write +length+ bytes to +io+ from
 *  from a specified +buffer+ (see IO::Buffer).
 *
 *  The +length+ argument is the "(minimum) length to be written".
 *  If the IO buffer size is 8KiB, but the +length+ specified is 1024 (1KiB),
 *  at most 8KiB will be written, but at least 1KiB will be.
 *  Generally, the only case where less data than +length+ will be written is if
 *  there is an error writing the data.
 *
 *  Specifying a +length+ of 0 is valid and means try writing at least once,
 *  as much data as possible.
 *
 *  Suggested implementation should try to write to +io+ in a non-blocking
 *  manner and call #io_wait if the +io+ is not ready (which will yield control
 *  to other fibers).
 *
 *  See IO::Buffer for an interface available to get data from buffer efficiently.
 *
 *  Expected to return number of bytes written, or, in case of an error, <tt>-errno</tt>
 *  (negated number corresponding to system's error code).
 *
 *  The method should be considered _experimental_.
 */
static VALUE
rb_fiber_scheduler_interface_io_write(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#kernel_sleep
 *  call-seq: kernel_sleep(duration = nil)
 *
 *  Invoked by Kernel#sleep and Mutex#sleep and is expected to provide
 *  an implementation of sleeping in a non-blocking way. Implementation might
 *  register the current fiber in some list of "which fiber wait until what
 *  moment", call Fiber.yield to pass control, and then in #close resume
 *  the fibers whose wait period has elapsed.
 *
 */
static VALUE
rb_fiber_scheduler_interface_kernel_sleep(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#address_resolve
 *  call-seq: address_resolve(hostname) -> array_of_strings or nil
 *
 *  Invoked by any method that performs a non-reverse DNS lookup. The most
 *  notable method is Addrinfo.getaddrinfo, but there are many other.
 *
 *  The method is expected to return an array of strings corresponding to ip
 *  addresses the +hostname+ is resolved to, or +nil+ if it can not be resolved.
 *
 *  Fairly exhaustive list of all possible call-sites:
 *
 *  - Addrinfo.getaddrinfo
 *  - Addrinfo.tcp
 *  - Addrinfo.udp
 *  - Addrinfo.ip
 *  - Addrinfo.new
 *  - Addrinfo.marshal_load
 *  - SOCKSSocket.new
 *  - TCPServer.new
 *  - TCPSocket.new
 *  - IPSocket.getaddress
 *  - TCPSocket.gethostbyname
 *  - UDPSocket#connect
 *  - UDPSocket#bind
 *  - UDPSocket#send
 *  - Socket.getaddrinfo
 *  - Socket.gethostbyname
 *  - Socket.pack_sockaddr_in
 *  - Socket.sockaddr_in
 *  - Socket.unpack_sockaddr_in
 */
static VALUE
rb_fiber_scheduler_interface_address_resolve(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#timeout_after
 *  call-seq: timeout_after(duration, exception_class, *exception_arguments, &block) -> result of block
 *
 *  Invoked by Timeout.timeout to execute the given +block+ within the given
 *  +duration+. It can also be invoked directly by the scheduler or user code.
 *
 *  Attempt to limit the execution time of a given +block+ to the given
 *  +duration+ if possible. When a non-blocking operation causes the +block+'s
 *  execution time to exceed the specified +duration+, that non-blocking
 *  operation should be interrupted by raising the specified +exception_class+
 *  constructed with the given +exception_arguments+.
 *
 *  General execution timeouts are often considered risky. This implementation
 *  will only interrupt non-blocking operations. This is by design because it's
 *  expected that non-blocking operations can fail for a variety of
 *  unpredictable reasons, so applications should already be robust in handling
 *  these conditions and by implication timeouts.
 *
 *  However, as a result of this design, if the +block+ does not invoke any
 *  non-blocking operations, it will be impossible to interrupt it. If you
 *  desire to provide predictable points for timeouts, consider adding
 *  +sleep(0)+.
 *
 *  If the block is executed successfully, its result will be returned.
 *
 *  The exception will typically be raised using Fiber#raise.
 */
static VALUE
rb_fiber_scheduler_interface_timeout_after(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#block
 *  call-seq: block(blocker, timeout = nil)
 *
 *  Invoked by methods like Thread.join, and by Mutex, to signify that current
 *  Fiber is blocked until further notice (e.g. #unblock) or until +timeout+ has
 *  elapsed.
 *
 *  +blocker+ is what we are waiting on, informational only (for debugging and
 *  logging). There are no guarantee about its value.
 *
 *  Expected to return boolean, specifying whether the blocking operation was
 *  successful or not.
 */
static VALUE
rb_fiber_scheduler_interface_block(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#unblock
 *  call-seq: unblock(blocker, fiber)
 *
 *  Invoked to wake up Fiber previously blocked with #block (for example, Mutex#lock
 *  calls #block and Mutex#unlock calls #unblock). The scheduler should use
 *  the +fiber+ parameter to understand which fiber is unblocked.
 *
 *  +blocker+ is what was awaited for, but it is informational only (for debugging
 *  and logging), and it is not guaranteed to be the same value as the +blocker+ for
 *  #block.
 *
 */
static VALUE
rb_fiber_scheduler_interface_unblock(VALUE self)
{
}

/*
 *  Document-method: SchedulerInterface#fiber
 *  call-seq: fiber(&block)
 *
 *  Implementation of the Fiber.schedule. The method is <em>expected</em> to immediately
 *  run the given block of code in a separate non-blocking fiber, and to return that Fiber.
 *
 *  Minimal suggested implementation is:
 *
 *     def fiber(&block)
 *       fiber = Fiber.new(blocking: false, &block)
 *       fiber.resume
 *       fiber
 *     end
 */
static VALUE
rb_fiber_scheduler_interface_fiber(VALUE self)
{
}
#endif

void
Init_Cont(void)
{
    rb_thread_t *th = GET_THREAD();
    size_t vm_stack_size = th->vm->default_params.fiber_vm_stack_size;
    size_t machine_stack_size = th->vm->default_params.fiber_machine_stack_size;
    size_t stack_size = machine_stack_size + vm_stack_size;

#ifdef _WIN32
    SYSTEM_INFO info;
    GetSystemInfo(&info);
    pagesize = info.dwPageSize;
#else /* not WIN32 */
    pagesize = sysconf(_SC_PAGESIZE);
#endif
    SET_MACHINE_STACK_END(&th->ec->machine.stack_end);

    fiber_pool_initialize(&shared_fiber_pool, stack_size, FIBER_POOL_INITIAL_SIZE, vm_stack_size);

    fiber_initialize_keywords[0] = rb_intern_const("blocking");
    fiber_initialize_keywords[1] = rb_intern_const("pool");

    const char *fiber_shared_fiber_pool_free_stacks = getenv("RUBY_SHARED_FIBER_POOL_FREE_STACKS");
    if (fiber_shared_fiber_pool_free_stacks) {
        shared_fiber_pool.free_stacks = atoi(fiber_shared_fiber_pool_free_stacks);
    }

    rb_cFiber = rb_define_class("Fiber", rb_cObject);
    rb_define_alloc_func(rb_cFiber, fiber_alloc);
    rb_eFiberError = rb_define_class("FiberError", rb_eStandardError);
    rb_define_singleton_method(rb_cFiber, "yield", rb_fiber_s_yield, -1);
    rb_define_singleton_method(rb_cFiber, "current", rb_fiber_s_current, 0);
    rb_define_method(rb_cFiber, "initialize", rb_fiber_initialize, -1);
    rb_define_method(rb_cFiber, "blocking?", rb_fiber_blocking_p, 0);
    rb_define_method(rb_cFiber, "resume", rb_fiber_m_resume, -1);
    rb_define_method(rb_cFiber, "raise", rb_fiber_m_raise, -1);
    rb_define_method(rb_cFiber, "backtrace", rb_fiber_backtrace, -1);
    rb_define_method(rb_cFiber, "backtrace_locations", rb_fiber_backtrace_locations, -1);
    rb_define_method(rb_cFiber, "to_s", fiber_to_s, 0);
    rb_define_alias(rb_cFiber, "inspect", "to_s");
    rb_define_method(rb_cFiber, "transfer", rb_fiber_m_transfer, -1);
    rb_define_method(rb_cFiber, "alive?", rb_fiber_alive_p, 0);

    rb_define_singleton_method(rb_cFiber, "blocking?", rb_fiber_s_blocking_p, 0);
    rb_define_singleton_method(rb_cFiber, "scheduler", rb_fiber_s_scheduler, 0);
    rb_define_singleton_method(rb_cFiber, "set_scheduler", rb_fiber_set_scheduler, 1);
    rb_define_singleton_method(rb_cFiber, "current_scheduler", rb_fiber_current_scheduler, 0);

    rb_define_singleton_method(rb_cFiber, "schedule", rb_fiber_s_schedule, -1);

#if 0 /* for RDoc */
    rb_cFiberScheduler = rb_define_class_under(rb_cFiber, "SchedulerInterface", rb_cObject);
    rb_define_method(rb_cFiberScheduler, "close", rb_fiber_scheduler_interface_close, 0);
    rb_define_method(rb_cFiberScheduler, "process_wait", rb_fiber_scheduler_interface_process_wait, 0);
    rb_define_method(rb_cFiberScheduler, "io_wait", rb_fiber_scheduler_interface_io_wait, 0);
    rb_define_method(rb_cFiberScheduler, "io_read", rb_fiber_scheduler_interface_io_read, 0);
    rb_define_method(rb_cFiberScheduler, "io_write", rb_fiber_scheduler_interface_io_write, 0);
    rb_define_method(rb_cFiberScheduler, "kernel_sleep", rb_fiber_scheduler_interface_kernel_sleep, 0);
    rb_define_method(rb_cFiberScheduler, "address_resolve", rb_fiber_scheduler_interface_address_resolve, 0);
    rb_define_method(rb_cFiberScheduler, "timeout_after", rb_fiber_scheduler_interface_timeout_after, 0);
    rb_define_method(rb_cFiberScheduler, "block", rb_fiber_scheduler_interface_block, 0);
    rb_define_method(rb_cFiberScheduler, "unblock", rb_fiber_scheduler_interface_unblock, 0);
    rb_define_method(rb_cFiberScheduler, "fiber", rb_fiber_scheduler_interface_fiber, 0);
#endif

#ifdef RB_EXPERIMENTAL_FIBER_POOL
    rb_cFiberPool = rb_define_class("Pool", rb_cFiber);
    rb_define_alloc_func(rb_cFiberPool, fiber_pool_alloc);
    rb_define_method(rb_cFiberPool, "initialize", rb_fiber_pool_initialize, -1);
#endif

    rb_provide("fiber.so");
}

RUBY_SYMBOL_EXPORT_BEGIN

void
ruby_Init_Continuation_body(void)
{
    rb_cContinuation = rb_define_class("Continuation", rb_cObject);
    rb_undef_alloc_func(rb_cContinuation);
    rb_undef_method(CLASS_OF(rb_cContinuation), "new");
    rb_define_method(rb_cContinuation, "call", rb_cont_call, -1);
    rb_define_method(rb_cContinuation, "[]", rb_cont_call, -1);
    rb_define_global_function("callcc", rb_callcc, 0);
}

RUBY_SYMBOL_EXPORT_END