Chain4Energy minter module provides functionality of controlled token emissions. Tokens are emitted according to configuration.
The purpose of cfeminter module is to provide token emission mechanism.
Token emission mechanism mints calculated amount of tokens per each block. Token amount is calculated accordingly to cfeminter module configuration params. Tokens minting process is divided into separate minters where each minter has different minting configuration. Token emission mechanism rules are defined within cfeminter module configuration params. Simply, minting process configuration is a list of ordered minters, where each minter has its own start and end time. Last minter cannot have end time because it must be defined to work infinitely.
Ordered list of minters defines whole token emission process. End time of one minter is a start time of the next minter in the minters list. Each minter has its own minting configuration assigned.
Each minter has its specific minting configuration which defines general rules of token emission. Currently, cfeminter module supports following minting configs:
- no minting
- linear minting
- exponential step minting
Each minting configuration has its own specific set of parameters modifying token emission.
No minting is a simple minting configuration that mints nothing. This minting configuration has no parameters.
Linear minting is block time based minting configuration. It mints predetermined amount of tokens within minter linearly. This minting configuration requires minter with end time since given amount of token needs to be minted in finite time period. So this minting configuration cannot be set in the last minter.
Linear minting configuration parameters:
- amount - amount of tokens to mint within minter period
Exponential step minting is block time based minting configuration. It mints predetermined amount of tokens within minter, where it divides this minter into smaller subminters of equal length. Then within each subminter expected amount is minted, linearly. Expected amount of subminter minted tokens is equal to tokens minted by previous subminter multiplied by configured factor. For example initial minter amount is 40 million, multiplying factor set to 0.5 and step duration is four years, then:
- 1st subminter (first 4 years) mints 40 millions linearly
- 2nd subminter (second 4 years) mints 20 millions linearly
- 3rd subminter (third 4 years) mints 10 millions linearly
- 4th subminter (fourth 4 years) mints 5 millions linearly and so on.
This minter can mint infinitely.
Exponential step minting configuration parameters:
- step duration - period of time mint amount is emitted
- amount - amount to mint for the first period
- amount multiplier - amount multiplying factor
Minter configuration:
- minting start: now
- Amount of minter Minters: 1
- Minter 1:
- end time: null
- config:
- type: exponential step minting
- step duration: 4 years
- amount: 40 millions
- amount multiplier: 0.5
Result:
- first 4 years mints 40 millions
- second 4 years mints 20 millions
- third 4 years mints 10 millions and so on
Minter configuration:
- minting start: now
- Amount of minter Minters: 2
- Minter 1:
- end time: 10 years from now
- config:
- type: linear minting
- amount: 100 millions
- Minter 2:
- end time: null
- config:
- type: no minting
Result:
- 10 millions yearly for 10 years
The Chain4Energy minter module contains the following configurations parameters:
| Key | Type | Description |
|---|---|---|
| mint_denom | string | Denom of minting token |
| start_time | Time | Token emission start time |
| minters | List of Minters | list of minters |
| Param | Type | Description |
|---|---|---|
| sequence_id | uint32 | Minter ordering id |
| end_time | Time | Minter end time |
| config | MinterConfigI | Minter configuration type that implements MinterConfigI interface. Allowed configuration types: - NoMinting - LinearMinting - ExponentialStepMinting |
| Param | Type | Description |
|---|---|---|
| type | NoMinting | Minter configuration type |
| Param | Type | Description |
|---|---|---|
| type | LinearMinting | Minter configuration type |
| amount | math.Int | An amount to mint linearly during the period |
| Param | Type | Description |
|---|---|---|
| type | ExponentialStepMinting | Minter configuration type |
| step_duration | uint32 | period of time of token emission |
| amount | math.Int | amount to mint during "stepDuration" |
| amount_multiplier | sdk.Dec | amount multiplying factor |
- Four years halving minting that starts with 40 million tokens and step duration set at 4 years
{
"params": {
"mint_denom": "uc4e",
"start_time": "2022-07-05T00:00:00Z",
"minters": [
{
"sequenceId": 1,
"end_time": null,
"config": {
"@type": "/chain4energy.c4echain.cfeminter.ExponentialStepMinting",
"step_duration": "126144000s",
"amount": 40000000000000,
"amount_multiplier": "0.500000000000000000"
}
}
]
}
}- Linear minting of 100 million of token during period of 10 years, next no emission
{
"params": {
"mint_denom": "uc4e",
"start_time": "2022-07-05T00:00:00Z",
"minters": [
{
"sequenceId": 1,
"end_time": "2023-07-05T00:00:00Z",
"config": {
"@type": "/chain4energy.c4echain.cfeminter.LinearMinting",
"amount": 100000000000000
}
},
{
"sequenceId": 2,
"end_time": null,
"config": {
"@type": "/chain4energy.c4echain.cfeminter.NoMinting"
}
}
]
}
}Chain4Energy minter module state contains information used by current minter. Module state contains following data:
| Key | Type | Description |
|---|---|---|
| minter_state | MinterState | current minter state |
| state_history | List of MinterState | previous minters final states |
| Key | Type | Description |
|---|---|---|
| sequence_id | uint32 | current minter sequenceId |
| amount_minted | math.Int | amount minted by current minter |
| remainder_to_mint | sdk.Dec | amount that should have been minted in previous block but was not |
| last_mint_block_time | sdk.Time | Time of last mint |
| remainder_from_previous_period | sdk.Dec | amount that should have been minted in previous minter but was not |
{
"minter_state": {
"sequence_id": 1,
"amount_minted": "13766330043442",
"remainder_to_mint": "0.415017757483510908",
"last_mint_block_time": "2022-11-07T14:49:34.606250Z",
"remainder_from_previous_period": "0.000000000000000000"
},
"state_history": []
}Burns a specified amount of tokens from the given address. This process permanently reduces the total supply of the tokens.
MsgBurn Message Represents a message to burn tokens from an account.
type MsgBurn struct {
Address string
Amount sdk.Coins
}- Validates if the Address is a valid bech32 account address.
- Validates if the Amount is positive and not nil.
- Ensures that the Address has a balance greater than or equal to the Amount.
- Sends the Amount from the Address to the
types.ModuleNamemodule account. - Burns the Amount from the
types.ModuleNamemodule account, thereby reducing the total supply of those tokens.
Chain4Energy minter module emits the following events:
| Type | Attribute Key | Attribute Value |
|---|---|---|
| EventMint | bonded_ratio | {tokens_boneded_ratio} |
| EventMint | inflation | {minting_block_inflation_level} |
| EventMint | amount | {amount_minted_in_block} |
| //: # (TODO remove bonded_ratio ) | ||
| //: # (TODO add minter period id) |
| Type | Attribute Key | Attribute Value |
|---|---|---|
| burn | burner | {sender_address} |
| burn | amount | {amount} |
| message | action | /chain4energy.c4echain.cfeclaim.MsgBurn |
| message | sender | {sender_address} |
| transfer | recipient | {module_account} |
| transfer | sender | {creator} |
| transfer | amount | {amount} |
Queries the module params.
See example response:
{
"params": {
"mint_denom": "uc4e",
"start_time": "2022-07-05T00:00:00Z",
"minters": [
{
"sequenceId": 1,
"end_time": null,
"config": {
"@type": "/chain4energy.c4echain.cfeminter.ExponentialStepMinting",
"step_duration": "126144000s",
"amount": 40000000000000,
"amount_multiplier": "0.500000000000000000"
}
}
]
}
}Queries the module state.
See example response:
{
"minter_state": {
"sequence_id": 1,
"amount_minted": "13766330043442",
"remainder_to_mint": "0.415017757483510908",
"last_mint_block_time": "2022-11-07T14:49:34.606250Z",
"remainder_from_previous_period": "0.000000000000000000"
},
"state_history": []
}Queries current inflation.
See example response:
{
"inflation": "0.102489480201216908"
}