Skip to content

Latest commit

 

History

History
141 lines (96 loc) · 4.72 KB

README.md

File metadata and controls

141 lines (96 loc) · 4.72 KB
Raw

3D Systems Geomagic Touch ROS Driver

ROS Packages for connecting one or more 3D Systems Geomagic Touch (previously known as Phantom Omni) haptic devices, USB version.

This repository has been forked from the original repository by Francisco Suárez Ruiz, http://fsuarez6.github.io for the Sensable PHANToM haptic device (https://github.com/fsuarez6/phantom_omni).

ROS packages developed by the Group of Robots and Intelligent Machines from the Universidad Politécnica de Madrid. This group is part of the Centre for Automation and Robotics (CAR UPM-CSIC).

Installation

  1. Install Dependencies
sudo apt-get install --no-install-recommends freeglut3-dev g++ libdrm-dev libexpat1-dev libglw1-mesa libglw1-mesa-dev libmotif-dev libncurses5-dev libraw1394-dev libx11-dev libxdamage-dev libxext-dev libxt-dev libxxf86vm-dev tcsh unzip x11proto-dri2-dev x11proto-gl-dev x11proto-print-dev
  1. Download and Extract OpenHaptics and Haptic Device drivers

Download drivers using instructions at: https://3dsystems.teamplatform.com/pages/102863?t=fptvcy2zbkcc
If you cannot access that page, use Old device drivers on the bottom of this README

  1. Install Openhaptics
cd ~/openhaptics_3.4-0-developer-edition-amd64/
sudo ./install
# This gets installed in the following directory
/opt/OpenHaptics/
  1. Install Geomagic Driver
cd ~/geomagic_touch_device_driver_2015.5-26-amd64/
sudo ./install
# This gets installed in the following directory:
/opt/geomagic_touch_device_driver/
  1. (Only For 64-bit Systems) Create Symbolic Links to OpenHaptics SDK Libraries
sudo ln -s /usr/lib/x86_64-linux-gnu/libraw1394.so.11.0.1 /usr/lib/libraw1394.so.8
sudo ln -s /usr/lib64/libPHANToMIO.so.4.3 /usr/lib/libPHANToMIO.so.4
sudo ln -s /usr/lib64/libHD.so.3.0.0 /usr/lib/libHD.so.3.0
sudo ln -s /usr/lib64/libHL.so.3.0.0 /usr/lib/libHL.so.3.0
  1. Device setup

The haptic device always creates a COM Port as /dev/ttyACM0 and requires admin priviliges

chmod 777 /dev/ttyACM0

Run Geomagic_Touch_Setup in /opt/geomagic_touch_device_driver/

Ensure that the device serial number is displayed

  1. Device Diagnostics

Run Geomagic_Touch_Diagnostic in /opt/geomagic_touch_device_driver/

This can be used to calibrate the device, read encoders, apply test forces etc.

  1. Launch ROS Node

Clone and build this repository.

cd <ROS_workspace>/devel
source setup.bash
roslaunch omni_common omni_state.launch

Data from the haptic device can be read from the following topics:

/phantom/button

/phantom/force_feedback

/phantom/joint_states

/phantom/pose

/phantom/state

Use Multiple Devices

Multiple devices can be connected by adding a unique name to each device. Following settings need to be made every time the devices are reconnected:

  1. Run Geomagic_Touch_Setup in /opt/geomagic_touch_device_driver/

  2. Add a new name by pressing Add... button in Device Name section and typing that name in the pop-up window

  3. Select that name in the drop-down list of Device Name

  4. Select Port Num of the device which you want to add that name to

  5. Press Apply

Example to run two devices (Left Device and Right Device):

roslaunch omni_common dual_phantom.launch

Resources

https://3dsystems.teamplatform.com/pages/102863?t=fptvcy2zbkcc

https://fsuarez6.github.io/projects/geomagic-touch-in-ros/

https://github.com/fsuarez6/phantom_omni

http://dsc.sensable.com/viewtopic.php?t=5730&sid=9866fe798e24bc745fdb7fce08ee99eb

Old device drivers https://drive.google.com/drive/folders/1WJY6HpdtGh5zeyASfb4FYJFFG-QGItd6?usp=sharing

Citation

Please cite these papers in your publications if this repository helps your research.

@INPROCEEDINGS{8941790,
  author={Mathur, Bharat and Topiwala, Anirudh and Schaffer, Saul and Kam, Michael and Saeidi, Hamed and Fleiter, Thorsten and Krieger, Axel},
  booktitle={2019 IEEE 19th International Conference on Bioinformatics and Bioengineering (BIBE)}, 
  title={A Semi-Autonomous Robotic System for Remote Trauma Assessment}, 
  year={2019},
  volume={},
  number={},
  pages={649-656},
  doi={10.1109/BIBE.2019.00122}}
  
@inbook{doi:10.1137/1.9781611975758.2,
author = {B. Mathur and A. Topiwala and H. Saeidi and T. Fleiter and A. Krieger},
title = {Evaluation of Control Strategies for a Tele-manipulated Robotic System for Remote Trauma Assessment},
booktitle = {2019 Proceedings of the Conference on Control and its Applications (CT)},
chapter = {},
pages = {7-14},
doi = {10.1137/1.9781611975758.2},
URL = {https://epubs.siam.org/doi/abs/10.1137/1.9781611975758.2},
eprint = {https://epubs.siam.org/doi/pdf/10.1137/1.9781611975758.2}}