Missing Hours with Seagate/Hitachi

[crpb]

Servus,

could you please make those outputs compatible?

root@backup05 ~ # smartctl -a -n standby /dev/da3
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p9 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               TOSHIBA
Product:              MG06SCA800EY
.....
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     37 C
Drive Trip Temperature:        65 C

Accumulated power on time, hours:minutes 21221:01
Manufactured in week 51 of year 2020
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  31
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  1033
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0        3         3         3          4    1406396.512           0
write:         0        0         0         0          0      44200.486           0

Non-medium error count:        0

root@nas-01 ~ # smartctl -a -n standby /dev/da2
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST8000NM0075
Revision:             PS26
....
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Grown defects during certification <not available>
Total blocks reassigned during format <not available>
Total new blocks reassigned = 13
Power on minutes since format <not available>
Current Drive Temperature:     41 C
Drive Trip Temperature:        60 C

Accumulated power on time, hours:minutes 57466:05
Manufactured in week 37 of year 2016
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  101
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  2491
Elements in grown defect list: 13

Vendor (Seagate Cache) information
  Blocks sent to initiator = 1586355488
  Blocks received from initiator = 3205147368
  Blocks read from cache and sent to initiator = 2718918563
  Number of read and write commands whose size <= segment size = 477772274
  Number of read and write commands whose size > segment size = 4242185

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 57466.08
  number of minutes until next internal SMART test = 7

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
.....

So basically those

• Accumulated power on time, hours:minutes 21221:01
• Accumulated power on time, hours:minutes 57466:05
  and maybe this aswell?
• number of hours powered up = 57466.08

cheers

[crpb]

i somehow believe the hours aren't displayed because of the sambe problem underneath as in #4

I will try to debug it but i'm generaly only a bash scripter.. /ó.