Fork of the WLED project where the Adalight USB serial protocol @115200 speed is replaced with the AWA protocol with data integrity check at @2000000 speed for use with HyperHDR.
In the releases you can also find special version working at only 921600 in case if your serial port chip doesn't support 2Mb speed.
The project will not follow WLED releases anymore unless there is a serious reason. It's designed to help you to setup your LED strip. Then you should migrate to HyperSerialEsp8266 or HyperSerialESP32 because when choosing fast USB solution you don't need a Wifi. So in this case those projects offer you lower power usage, less electromagnetic interference and more available resources.
1 For installation and configuration of WLED please refer to the WLED project: link
2 For configuration of HyperHDR please refer to the base project of AWA protocol: link
ESP32-C3, ESP32-S3
esptool.exe -p COM10 erase_flash
esptool.exe -p COM10 write_flash 0x0 C3_bootloader.bin
esptool.exe -p COM10 write_flash 0x8000 C3_partitions.bin
esptool.exe -p COM10 write_flash 0x010000 WLED_0.14.0_ESP32-C3.bin
esptool.exe -p COM9 erase_flash
esptool.exe -p COM9 write_flash 0x0 S3_noPSRAM_qio_bootloader.bin // or with PSRAM
esptool.exe -p COM9 write_flash 0x8000 S3_partitions_8MB.bin
esptool.exe -p COM9 write_flash 0x010000 WLED_0.14.0_ESP32-S3_8MB.bin
ESP8266:
ESP32:
WLED is receiving data from the USB serial port at @2000000 baud:
- WS2812FX library with more than 100 special effects
- FastLED noise effects and 50 palettes
- Modern UI with color, effect and segment controls
- Segments to set different effects and colors to user defined parts of the LED string
- Settings page - configuration via the network
- Access Point and station mode - automatic failsafe AP
- Up to 10 LED outputs per instance
- Support for RGBW strips
- Up to 250 user presets to save and load colors/effects easily, supports cycling through them.
- Presets can be used to automatically execute API calls
- Nightlight function (gradually dims down)
- Full OTA software updatability (HTTP + ArduinoOTA), password protectable
- Configurable analog clock (Cronixie, 7-segment and EleksTube IPS clock support via usermods)
- Configurable Auto Brightness limit for safe operation
- Filesystem-based config for easier backup of presets and settings
- WLED app for Android and iOS
- JSON and HTTP request APIs
- MQTT
- E1.31, Art-Net, DDP and TPM2.net
- diyHue (Wled is supported by diyHue, including Hue Sync Entertainment under udp. Thanks to Gregory Mallios)
- UDP realtime
- Alexa voice control (including dimming and color)
- Sync to Philips hue lights
- Adalight (PC ambilight via serial) and TPM2
- Sync color of multiple WLED devices (UDP notifier)
- Infrared remotes (24-key RGB, receiver required)
- Simple timers/schedules (time from NTP, timezones/DST supported)
See the documentation on our official site!
On this page you can find excellent tutorials and tools to help you get your new project up and running!
See here!
Licensed under the MIT license
Credits here!
Join the Discord server to discuss everything about WLED!
Check out the WLED Discourse forum!
You can also send me mails to [email protected], but please, only do so if you want to talk to me privately.
If WLED really brightens up your day, you can
Disclaimer:
If you are prone to photosensitive epilepsy, we recommended you do not use this software.
If you still want to try, don't use strobe, lighting or noise modes or high effect speed settings.
As per the MIT license, I assume no liability for any damage to you or any other person or equipment.